BIS - LIMS (Laboratory Information Management System)

Yadav Measurements Pvt Ltd, Udaipur

Plot no. F 373-375, RIICO Bhamashah Industrial Area, Kaladwas, Udaipur (Rajasthan)-313003, Udaipur, Udaipur, Rajasthan, 313003

9829267374 yadav.measurements@yadavmeasurements.com

Scope List

Reset

12 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

IS 14439 : Part 4 (2025)

Legal metrology -- Gas volume meters: Part 4 Thermal mass flow based gas meters -- Specification

G1.6 to G25

3945500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4.1(General specific requirements)	-	0	-
Cl-4.2(Base Conditions)	-	0	-
Cl-4.3(Flow Range)	-	0	-
Cl-4.4(Maximum Working Pressure)	-	0	-
Cl-4.5.2(Ambient Temperature Range)	-	0	-
Cl-4.5.3(Gas Temperature Range)	-	0	-
Cl-4.6(Range of Gases)	-	0	-
Cl-4.7(Installation Orientation)	-	0	-
Cl-5.1(General manufacturer metrological)	-	0	-
Cl-5.2(Test Mode Comparison)	-	35500	-
Cl-5.3.1(Permissible Errors)	-	120000	-
Cl-5.4(Gas-Air Relationship)	-	20500	-
Cl-5.5.1(Pressure Absorption Requirements)	-	8500	-
Cl-5.6(Metrological Stability)	-	8500	-
Cl-5.7.1(Flow Disturbance Requiremnets)	-	35500	-
Cl-5.8.1(Zero Flow Requirements)	-	20500	-
Cl-5.9.1(Reverse Flow Requirements)	-	8500	-
Cl-5.10.1(Low Flow Registration (Starting Flow Rate) Requirements)	-	10500	-
Cl-5.11.1(Overload Flow Rate Requirements)	-	10500	-
Cl-5.12(Pulsed (Unsteady) Flow)	-	55000	-
Cl-6.1(Mechanical Interference)	-	8500	-
Cl-6.2(Electronic Sealing)	-	8500	-
Cl-6.3.1(Robustness of Meter Case)	-	8500	-
Cl-6.3.2(Protection against Penetration of Dust and Water)	-	14500	-
Cl-6.3.3(External Leak Tightness Requirements)	-	8500	-
Cl-6.3.4(Resistance to Internal Pressure)	-	8500	-
Cl-6.3.5(Heat Resistance)	-	8500	-
Cl-6.3.6(Resistance to Impact Requirements)	-	8500	-
Cl-6.3.7(Resistance to Mishandling)	-	10500	-
Cl-6.4.1(Orientation Requirements)	-	8500	-
Cl-6.4.2(Threads and Flanges for Two Pipe Meters)	-	8500	-
Cl-6.4.3.1(Torque-Requirements:)	-	8500	-
Cl-6.4.3.2(Bending moment)	-	25000	-
Cl-6.5.1(Resistance to Vibration Requirements)	-	14500	-
Cl-6.6.2.1(Scratch resistance of the protective coating)	-	8500	-
Cl-6.6.2.2(Adhesion of the protective coating)	-	8500	-
Cl-6.6.2.3(Impact resistance of the protective coating Requirements)	-	8500	-
Cl-6.6.2.4(Chemical resistance of the protective coating Requirements:)	-	120000	-
Cl-6.6.2.5(Resistance to salt spray)	-	250000	-
Cl-6.6.2.6(Resistance to humidity)	-	320000	-
Cl-6.7.1(Flame Retardance of External Surfaces)	-	8500	-
Cl-6.8.1(Requirement for Rubber Components in the Gas Path)	-	8500	-
Cl-6.9.1(Resistance to Storage Temperature Range)	-	20500	-
Cl-6.10.1(Resistance to Toluene/ISO-Octane Vapour)	-	780000	-
Cl-6.11.1(Resistance to Water Vapour Requirements)	-	780000	-
Cl-6.12(Ageing Requirements)	-	780000	-
Cl-7.1(Pressure Measuring Point)	-	10500	-
Cl-7.2(Electrical Insulating Feet)	-	8500	-
Cl-7.3(Resistance to High Ambient Temperatures)	-	8500	-
Cl-7.4(Gas Valve and System)	-	8500	-
Cl-7.5(Additional Functionalities (if fitted))	-	14500	-
Cl-7.6(Use in Hazardous Zones)	-	0	-
Cl-7.7(Devices to Prevent Reverse Flow)	-	8500	-
Cl-8.1(Recording and Storage)	-	8500	-
Cl-8.2.1(Display Requirements)	-	8500	-
Cl-8.3.1(Display Functionality Requirements)	-	8500	-
Cl-8.4.1(Non-Volatile Memory)	-	25000	-
Cl-9(Marking)	-	8500	-
Cl-9(Marking- Two Pipe Meters)	-	8500	-
Cl-9("Marking Durability and Legibility of Marking and Labels")	-	243000	Price cover all mentioned clauses 9.4, 9.5, 10, 11.1, 11.2, 11.3, 11.4, 11.5, 11.6, 12.1, 12.2,12.3.1, 12.3.2, 12.3.3, 12.4, 12.5, 12.6, 13, 13.2,13.3, 13.4, 13.5, 13.6
Cl-5.2.4(Test Mode in Flow (Optional))	-	35500	-

-
Included w.e.f. 12.06.2026

IS 14697 (2021)

ac STATIC TRANSFORMER OPERATED WATTHOUR METERS CLASS 02 S AND 05 S AND VAR-HOUR METERS CLASS 02 S 05 S AND 10 S - SPECIFICATION First Revision

up to Amendment 2

178500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
9.5 & 12.7.6.2(Impulse voltage test)	-	7227	No comments
9.5 & 12.7.6.3(a.c. voltage test)	-	594	No comments
12.7.6.4(Insulation resistance test)	-	594	No comments
11.1(Limits of Error Due to Variation of the Current)	-	2277	No comments
12.15(Interpretation of Test Results)	-	0	No comments
11.4.1(Initial Start-up of the Meter)	-	0	No comments
12.13 & 11.5(Starting Current)	-	594	No comments
11.6 & 12.14(Meter Constant)	-	594	No comments
11.4.2 & 12.12(Running with No-Load)	-	594	No comments
11.3 & 12.11(Limits of Error Due to Ambient Temperature Variation)	-	3861	No comments
11.7 & 12.16(Repeatability of Error Test)	-	6188	No comments
11.2(Voltage variation)	-	1008	No comments
11.2(Frequency variation)	-	1008	No comments
11.2(Wave form: 10 percent of third harmonic in the current)	-	1008	No comments
11.2(Reversed phase sequence)	-	1008	No comments
11.2(Voltage unbalance)	-	1008	No comments
11.2(Auxiliary voltage ± 15 percent)	-	1008	No comments
11.2("Phase of Auxiliary supply voltage by 120 degree")	-	1008	No comments
11.2(Electromagnetic HF fields)	-	26000	No comments
11.2(Electrical fast transient burst)	-	7227	No comments
11.2(‘Abnormal’ ac magnetic induction of external origin 10 mT)	-	1008	No comments
11.2(Continuous ‘abnormal’ magnetic induction of external origin)	-	1008	No comments
11.2(Magnetic induction of external origin 0.5 mT)	-	1008	No comments
11.2(Continuous magnetic induction of external origin)	-	1008	No comments
9.1 & 12.7.1(Power Consumption)	-	743	No comments
9.2.2 & 12.7.2(Influence of Supply Voltage)	-	1980	No comments
9.2.3 & 12.7.3(Short Time Over Current)	-	3218	No comments
9.4 & 12.7.5(Influence of Heating)	-	600	No comments
9.3 & 12.7.4(Influence of Self-heating)	-	1238	No comments
9.6 & 12.17(Immunity to Earth/Phase Fault)	-	1395	No comments
"12.8.6(Radio Interference Measurement)	-	14500	No comments
"12.8.2("Test for Immunity to Electrostatic Discharge (ESD) ")	-	7227	No comments
12.6.1(Dry heat test)	-	8200	No comments
12.6.2(Cold Test)	-	9306	No comments
12.6.3(Damp Heat Cycle Test)	-	9306	No comments
12.3.2(Vibration test)	-	12078	No comments
12.3.1(Shock test)	-	7494	No comments
12.3.3(Spring hammer test)	-	575	No comments
12.5(Protection against penetration of dust and water)	-	10415	No comments
12.4(Test of resistance to heat and fire)	-	6039	No comments
6.1(General)	-	1	No comments
6.2(Meter Case)	-	1	No comments
6.3(Window)	-	1	No comments
6.4(Terminals, Terminals Block(s) and Protective Earth Terminal)	-	1	No comments
6.5(Terminal Cover(s))	-	1	No comments
6.6(Clearance and Creepage Distance)	-	1	No comments
6.7(Insulating Encased Meter)	-	1	No comments
6.10(Display of Measured Values)	-	1	No comments
6.11(Output Device)	-	1	No comments
7.1(Name Plate)	-	1	No comments
7.2(Connections, Diagrams and Terminal Marking)	-	1	No comments
9.2.3 12.7.3(Test of Influence of Short-time Overcurrents)	-	3218	same as earlier
9.6, 12.17(Test of Immunity to Earth/Phase Fault)	-	1395	same as earlier
11.3, 12.11(Test of Ambient Temperature Influence)	-	3861	same as earlier
12.9.1(Test of Accuracy Requirements : General Test Conditions)	-	2277	same as earlier

-
-

IS 16444 (2015)

AC static direct connected watthour smart meter class 1 and 2 - Specification

up to Amendment 3 (Year 2023)

668000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
cl. 11.1 of IS 13779(Limits of Error Due to Variation of tile Current)	-	1520	This test charges: Rs 1450 /- for the UC1 single phase meter , Rs 1520/- for UC1 three phase meter, Rs 1450/- for UC2 or UC3 single phase meter, Rs 1520/- for UC2 or UC3 three phase meters
12.7.1 of IS 13779(Test of Power Consumption)	-	1500	This test charges: Rs 1500/- for the UC1 single phase meter , Rs 1500/- for UC1 three phase meter, Rs 1500/- for UC2 or UC3 single phase meter, Rs 1500/- for UC2 or UC3 three phase meters
12.9.2 of IS 13779(Test for Immunity to Electrostatic Discharge (ESD))	-	1	This test charges: Rs /- for the UC1 single phase meter , Rs /- for UC1 three phase meter, Rs /- for UC2 or UC3 single phase meter, Rs /- for UC2 or UC3 three phase meters
12.9.3 of IS 13779(Test for Immunity to EIectromagnetic HF Fields)	-	1	Covered in other test
12.9.5 of IS 13779(Radio Interference Measurement)	-	1	Covered in other test
Note 1a of Table 1(Accuracy of the meter at pre-defined points)	-	1	Covered in other test
Note 1b of Table 1(Access and data read test)	-	0	Covered in other test
Note 1c of Table 1(Remote disconnect/connect)	-	0	Covered in other test
12.16 a) of IS 13779(Limits of Error and Interpretation or Test Results)	-	500	This test charges: Rs 500/- for the UC1 single phase meter , Rs 500/- for UC1 three phase meter, Rs 500/- for UC2 or UC3 single phase meter, Rs 500/- for UC2 or UC3 three phase meters
12.16 b) of IS 13779(Limits of Error and Interpretation or Test Results)	-	500	This test charges: Rs 500/- for the UC1 single phase meter , Rs 500/- for UC1 three phase meter, Rs 500/- for UC2 or UC3 single phase meter, Rs 500/- for UC2 or UC3 three phase meters
12.16 c) of IS 13779(Limits of Error and Interpretation or Test Results)	-	500	This test charges: Rs 500/- for the UC1 single phase meter , Rs 500/- for UC1 three phase meter, Rs 500/- for UC2 or UC3 single phase meter, Rs 500/- for UC2 or UC3 three phase meters
cl. 11.5 of IS 13779(Starting Current)	-	690	This test charges: Rs 600/- for the UC1 single phase meter , Rs 690/- for UC1 three phase meter, Rs 600/- for UC2 or UC3 single phase meter, Rs 690/- for UC2 or UC3 three phase meters
cl. 11.6 of IS 13779(Meter Constant)	-	690	This test charges: Rs 600/- for the UC1 single phase meter , Rs 690/- for UC1 three phase meter, Rs 600/- for UC2 or UC3 single phase meter, Rs 690/- for UC2 or UC3 three phase meters
12.13 of IS 13779(Test of No-Load Condition)	-	690	This test charges: Rs 600/- for the UC1 single phase meter , Rs 690/- for UC1 three phase meter, Rs 600/- for UC2 or UC3 single phase meter, Rs 690/- for UC2 or UC3 three phase meters
12.12 of IS 13779(Test ofAmbient Temperature Influence)	-	1200	This test charges: Rs 1150/- for the UC1 single phase meter , Rs 1200/- for UC1 three phase meter, Rs 1150/- for UC2 or UC3 single phase meter, Rs 1200/- for UC2 or UC3 three phase meters
12.17 of IS 13779(Repeatability of Error Test )	-	3450	This test charges: Rs 3200 /- for the UC1 single phase meter , Rs 3450/- for UC1 three phase meter, Rs 3200/- for UC2 or UC3 single phase meter, Rs 3450/- for UC2 or UC3 three phase meters
cl. 11.2 of IS 13779(Limits of Error Due to Other Influence Quantities (Voltage-Variation, Frequency Variation, Phase-Sequence, Wave Form, Voltage-Unba.ance))	-	24000	This test charges: Rs 22000/- for the UC1 single phase meter , Rs 24000/- for UC1 three phase meter, Rs 22000/- for UC2 or UC3 single phase meter, Rs 24000/- for UC2 or UC3 three phase meters
4.4.2.7 of IS 15844(Voltage dips and short interruptions)	-	0	This test charges: Rs /- for the UC1 single phase meter , Rs /- for UC1 three phase meter, Rs /- for UC2 or UC3 single phase meter, Rs /- for UC2 or UC3 three phase meters
4.4.3 of IS 15844(Influence of Short-Time Overcurrents)	-	3450	This test charges: Rs 3450/- for the UC1 single phase meter , Rs 3450/- for UC1 three phase meter, Rs 3450/- for UC2 or UC3 single phase meter, Rs 3450/- for UC2 or UC3 three phase meters
4.4.5 of IS 15844(Influence of Heating)	-	600	This test charges: Rs 500/- for the UC1 single phase meter , Rs 600/- for UC1 three phase meter, Rs 500/- for UC2 or UC3 single phase meter, Rs 600/- for UC2 or UC3 three phase meters
4.4.4 of IS 15844(Influence of Self-Heating)	-	1380	This test charges: Rs 1300 /- for the UC1 single phase meter , Rs 1380/- for UC1 three phase meter, Rs 1300/- for UC2 or UC3 single phase meter, Rs 1380/- for UC2 or UC3 three phase meters
12.8 of IS 13779(TestorImmunity to Earth Fault)	-	900	This test charges: Rs 800/- for the UC1 single phase meter , Rs 900/- for UC1 three phase meter, Rs 800/- for UC2 or UC3 single phase meter, Rs 900/- for UC2 or UC3 three phase meters
6.11(Fast transient burst test)	-	6935	This test charges: Rs 6500/- for the UC1 single phase meter , Rs 6935/- for UC1 three phase meter, Rs 5500/- for UC2 or UC3 single phase meter, Rs 6935/- for UC2 or UC3 three phase meters
6.11(Surge Immunity test)	-	10500	This test charges: Rs 9500/- for the UC1 single phase meter , Rs 10500/- for UC1 three phase meter, Rs 9500/- for UC2 or UC3 single phase meter, Rs 10500/- for UC2 or UC3 three phase meters
12.6.1 of IS 13779(Dry Heat Test)	-	9500	This test charges: Rs 8500/- for the UC1 single phase meter , Rs 9500/- for UC1 three phase meter, Rs 8500/- for UC2 or UC3 single phase meter, Rs 9500/- for UC2 or UC3 three phase meters
12.6.2 of IS 13779(Cold Test)	-	9500	This test charges: Rs 8500/- for the UC1 single phase meter , Rs 9500/- for UC1 three phase meter, Rs 8500/- for UC2 or UC3 single phase meter, Rs 9500/- for UC2 or UC3 three phase meters
12.6.3 of IS 13779( Damp Heat Cycle Test)	-	8500	This test charges: Rs 7500/- for the UC1 single phase meter , Rs 8500/- for UC1 three phase meter, Rs 7500/- for UC2 or UC3 single phase meter, Rs 8500/- for UC2 or UC3 three phase meters
12.3.2 of IS 13779(Vibration Test)	-	6100	This test charges: Rs 5500/- for the UC1 single phase meter , Rs 6100/- for UC1 three phase meter, Rs 5500/- for UC2 or UC3 single phase meter, Rs 6100/- for UC2 or UC3 three phase meters
12.3.1 of IS 13779(Shock Test)	-	6000	This test charges: Rs 5500/- for the UC1 single phase meter , Rs 6000/- for UC1 three phase meter, Rs 5500/- for UC2 or UC3 single phase meter, Rs 6000/- for UC2 or UC3 three phase meters
12.3.3 of IS 13779( Spring Hammer Test)	-	600	This test charges: Rs 600/- for the UC1 single phase meter , Rs 600/- for UC1 three phase meter, Rs 600/- for UC2 or UC3 single phase meter, Rs 600/- for UC2 or UC3 three phase meters
6.5(Protection against penetration of dust and water)	-	3500	This test charges: Rs 3500/- for the UC1 single phase meter , Rs 3500/- for UC1 three phase meter, Rs 3500/- for UC2 or UC3 single phase meter, Rs 3500/- for UC2 or UC3 three phase meters
12.4 of IS 13779(Testof Resistance to Heat and Fire )	-	5750	This test charges: Rs 5200/- for the UC1 single phase meter , Rs 5750/- for UC1 three phase meter, Rs 5200/- for UC2 or UC3 single phase meter, Rs 5750/- for UC2 or UC3 three phase meters
cl. 12.7.6.2 of IS 13779(Impulse voltage test)	-	10500	This test charges: Rs 9500/- for the UC1 single phase meter , Rs 10500/- for UC1 three phase meter, Rs 9500/- for UC2 or UC3 single phase meter, Rs 10500/- for UC2 or UC3 three phase meters
cl. 12.7.6.3 of IS 13779(ac Voltage test)	-	575	Complete testing charges: Rs 440000/- for the UC1 single phase meter , Rs 533000/- for UC1 three phase meter, Rs 560000/- for UC2 or UC3 single phase meter, Rs 668000/- for UC2 or UC3 three phase meters. This test charges: Rs 500, 575, 500, 575.
cl. 12.7.6.4 of IS 13779(Insulation resistance test)	-	600	This test charges: Rs 550 /- for the UC1 single phase meter , Rs 600/- for UC1 three phase meter, Rs 550/- for UC2 or UC3 single phase meter, Rs 600/- for UC2 or UC3 three phase meters
7.2, 10.4(Performance Requirements for Load Switching (UC1))	-	120000	Applicable only for UC1 This test charges: Rs 80000/- for the UC1 single phase meter , Rs 120000/- for UC1 three phase meter,
7.2, 10.4(Normal operation (G-2))	-	7000	Applicable only for UC2 This test charges: Rs 7000/- for UC2 or UC3 single phase meter, Rs 7000/- for UC2 or UC3 three phase meters
7.2, 10.4(Electrical endurance (G-3))	-	145000	This test charges: Rs 90000/- for UC2 or UC3 single phase meter, Rs 145000/- for UC2 or UC3 three phase meters
7.2, 10.4(Line to load voltage surge withstand (G-4))	-	6720	This test charges: Rs 5150/- for UC2 or UC3 single phase meter, Rs 6720/- for UC2 or UC3 three phase meters
7.2, 10.4(Fault current making capacity (G-5))	-	56000	This test charges: Rs 52000/- for UC2 or UC3 single phase meter, Rs 56000/- for UC2 or UC3 three phase meters
7.2, 10.4(Short circuit current carrying capacity (G-6))	-	35000	This test charges: Rs 32000/- for UC2 or UC3 single phase meter, Rs 35000/- for UC2 or UC3 three phase meters
7.2, 10.4(Minimum switched current (G-7))	-	7500	This test charges: Rs 7500/- for UC2 or UC3 single phase meter, Rs 7500/- for UC2 or UC3 three phase meters
7.2, 10.4(Dielectric strength (G-8))	-	10500	This test charges: Rs 7500/- for UC2 or UC3 single phase meter, Rs 10500/- for UC2 or UC3 three phase meters
10.5(Test for Data Exchange Protocol)	-	135000	This test charges: Rs 120000/- for the UC1 single phase meter , Rs 135000/- for UC1 three phase meter, Rs 124850/- for UC2 or UC3 single phase meter, Rs 135000/- for UC2 or UC3 three phase meters
10.6.2(Test for Smart meter communicability )	-	6000	This test charges: Rs 6000/- for the UC1 single phase meter , Rs 6000/- for UC1 three phase meter, Rs 6000/- for UC2 or UC3 single phase meter, Rs 6000/- for UC2 or UC3 three phase meters
10.3(Test of Display)	-	2000	This test charges: Rs 2000/- for the UC1 single phase meter , Rs 2500/- for UC1 three phase meter, Rs 2000/- for UC2 or UC3 single phase meter, Rs 2000/- for UC2 or UC3 three phase meters
11(Smart Meter Functional Requirement)	-	6000	This test charges: Rs 6000 /- for the UC1 single phase meter , Rs 8000/- for UC1 three phase meter, Rs 6000 /- for UC2 or UC3 single phase meter, Rs 6000/- for UC2 or UC3 three phase meters
6.2(General and constructional requirements)	-	3000	This test charges: Rs3000 /- for the UC1 single phase meter , Rs 3500/- for UC1 three phase meter, Rs 3000/- for UC2 or UC3 single phase meter, Rs 3000/- for UC2 or UC3 three phase meters
6.6(Display of measured values)	-	1	This test charges:
6.7(Output device)	-	4800	This test charges: Rs 4800/- for the UC1 single phase meter , Rs 6500/- for UC1 three phase meter, Rs 4800/- for UC2 or UC3 single phase meter, Rs 4800/- for UC2 or UC3 three phase meters
6.8(Connection diagrams and terminal marking)	-	3150	This test charges: Rs 3150/- for the UC1 single phase meter , Rs 4500/- for UC1 three phase meter, Rs 3150 /- for UC2 or UC3 single phase meter, Rs 3150/- for UC2 or UC3 three phase meters
6.8(Marking of smart meters Name plate)	-	3000	This test charges: Rs3000 /- for the UC1 single phase meter , Rs 3500/- for UC1 three phase meter, Rs 3000/- for UC2 or UC3 single phase meter, Rs 3000/- for UC2 or UC3 three phase meters
9, 10.6(Test of Smart Meter Communicability)	-	6000	-

-
-

IS 15884 (2024)

ALTERNATING CURRENT DIRECT CONNECTED STATIC PREPAYMENT METERS FOR ACTIVE ENERGY CLASS 1 AND 2 SPECIFICATION

Alternating current direct connected static prepayment meters for active energy , (class 1 and 2) - specification

633950 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(GENERAL REQUIREMENTS)	-	14950	-
5.2.1(Spring Hammer Test)	-	1300	-
5.2.2(Shock Test)	-	5200	-
5.2.3(Vibration Test)	-	9100	-
5.2.4(Test of Resistance to Heat and Fire)	-	3250	-
5.2.5(Tests of Protection against Penetration of Dust and Water)	-	6500	-
5.3.1(Dry Heat Test)	-	5000	-
5.3.2(Cold Test)	-	6500	-
5.3.3(Damp Heat Cyclic Test)	-	11700	-
5.4.1(Test of Power Consumption)	-	2600	-
5.4.2(Test of influence of voltage dips and interruptions)	-	2000	-
5.4.3(Test of Influence of Short-Time Overcurrent)	-	140000	-
5.4.4(Test of Influence of Self-Heating)	-	2000	-
5.4.5(Test of Influence of Heating)	-	2000	-
5.4.6.2(Impulse voltage test)	-	7500	-
5.4.6.3(a.c. voltage test)	-	1350	-
5.4.6.4(Insulation resistance test)	-	1350	-
5.5.2(Test of Immunity to Electrostatic Discharges)	-	6500	-
5.5.3(Test of Immunity to Electromagnetic HF Fields)	-	32000	-
5.5.4(Fast Transient Burst Test)	-	7800	-
5.5.5(Radio Interference Measurement)	-	28000	-
5.5.6(Surge Immunity Test)	-	12000	-
5.6.2(Test of Influence Quantities)	-	22000	-
5.6.3(Test of No-Load Condition)	-	1300	-
5.6.4(Test of Starting Condition)	-	1300	-
5.6.5(Test of Meter Constant)	-	1300	-
5.6.6(Interpretation of Test Results)	-	0	-
5.7(Test of the Load Switch operation for payment function)	-	3500	-
5.8(Test of Charging Functions)	-	7000	-
5.9(Interruption and Restoration of the Load for Emergency Credit Facility (if applicable))	-	3500	-
5.10(Tests of the Load Switch operation at Different Voltages and Temperature)	-	14000	-
6(FUNCTIONAL REQUIREMENTS)	-	33500	-
4(GENERAL REQUIREMENTS)	-	-	-
5.2.1(Spring Hammer Test)	-	-	-
5.2.2(Shock Test)	-	-	-
5.2.3(Vibration Test)	-	-	-
5.2.4(Test of Resistance to Heat and Fire)	-	-	-
5.2.5(Tests of Protection against Penetration of Dust and Water)	-	-	-
5.3.1(Dry Heat Test)	-	-	-
5.3.2(Cold Test)	-	-	-
5.3.3(Damp Heat Cyclic Test)	-	-	-
5.4.1(Test of Power Consumption)	-	-	-
5.4.2(Test of influence of voltage dips and interruptions)	-	-	-
5.4.3(Test of Influence of Short-Time Overcurrent)	-	-	-
5.4.4(Test of Influence of Self-Heating)	-	-	-
5.4.5(Test of Influence of Heating)	-	-	-
5.4.6.2(Impulse voltage test)	-	-	-
5.4.6.3(a.c. voltage test)	-	-	-
5.4.6.4(Insulation resistance test)	-	-	-
5.5.2(Test of Immunity to Electrostatic Discharges)	-	-	-
5.5.3(Test of Immunity to Electromagnetic HF Fields)	-	-	-
5.5.4(Fast Transient Burst Test)	-	-	-
5.5.5(Radio Interference Measurement)	-	-	-
5.5.6(Surge Immunity Test)	-	-	-
5.6.2(Test of Influence Quantities)	-	-	-
5.6.3(Test of No-Load Condition)	-	-	-
5.6.4(Test of Starting Condition)	-	-	-
5.6.5(Test of Meter Constant)	-	-	-
5.6.6(Interpretation of Test Results)	-	-	-
5.7(Test of the Load Switch operation for payment function)	-	-	-
5.8(Test of Charging Functions)	-	-	-
5.9(Interruption and Restoration of the Load for Emergency Credit Facility (if applicable))	-	-	-
5.10(Tests of the Load Switch operation at Different Voltages and Temperature)	-	-	-
6(FUNCTIONAL REQUIREMENTS)	-	-	-

-
-

IS 14439 : Part 2 (1998)

Leagal metrology - Gas volume meters: Part 2 diaphagm gas meters

G1.6 to G6

461000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(General)	-	15000	Applicable only for Mechanical type gas meter
5.2(Test Element of a mechanical indicating device)	-	15000	Applicable only for Mechanical type gas meter
6(MAXIMUM PERMISSIBLE ERRORS)	-	45000	Applicable for both Electronic type and Mechanical type gas meter
7(PRESSURE ABSORPTION)	-	15000	Applicable for both Electronic type and Mechanical type gas meter
10.2(Subsequent varifictions (This is not part of initial type test varification))	-	9000	Applicable for both Electronic type and Mechanical type gas meter
5.1(General)	-	0	Prices as above. Applicable only for Mechanical type gas meter
5.2(Test Element of a mechanical indicating device)	-	0	Prices as above. Applicable only for Mechanical type gas meter
6(MAXIMUM PERMISSIBLE ERRORS)	-	0	Prices as above.. Applicable for both Electronic type and Mechanical type gas meter
7(PRESSURE ABSORPTION)	-	0	Prices as above.. Applicable for both Electronic type and Mechanical type gas meter
10.2(Subsequent varifictions (This is not part of initial type test varification))	-	0	Prices as above.. Applicable for both Electronic type and Mechanical type gas meter
8(Pattern Approval)	-	296000	8.2 Examination (upto G6 gas meter)
9(Initial Verification)	-	66000	9.2 Accuracy Tests (upto G6 gas meter)

-
Included w.e.f. 15.11.2022

IS 14439 : Part 1 (1997)

Legal metrology - Gas volume meters: Part 1 general requirements

G1.6 to G6

750000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
B-1(DRY HEAT TEST (NON-CONDENSING))	-	37000	Applicable only for Electronic type gas meter
B-2(COLD TEST)	-	37000	Applicable only for Electronic type gas meter
B-3(DAMP HEAT, CYCLIC)	-	28000	Applicable only for Electronic type gas meter
B-4(VARIATION IN MAINS POWER SUPPLY)	-	16500	Applicable only for Electronic type gas meter
B-5(a)(VIBRATION (RANDOM))	-	72500	Applicable only for Electronic type gas meter
B-5(b)(VIBRATION (SINUSOIDAL).)	-	73500	Applicable only for Electronic type gas meter
B-6(MECHANICAL SHOCK)	-	14000	Applicable only for Electronic type gas meter
B-7(SHORT TIME POWER REDUCTION)	-	16500	Applicable only for Electronic type gas meter
4.2(Construction)	-	46000	Applicable for both Electronic type and Mechanical type gas meter
4.3(Additional Devices)	-	20000	Applicable for both Electronic type and Mechanical type gas meter
6.1(Indicating Devices)	-	20000	Applicable for both Electronic type and Mechanical type gas meter
6.2(Test Element)	-	22500	Applicable for both Electronic type and Mechanical type gas meter
7(MAXIMUMPERMISSIBLE ERRORS)	-	66000	Applicable for both Electronic type and Mechanical type gas meter
5(MARKINGS)	-	38000	Applicable for both Electronic type and Mechanical type gas meter
8(PRESSURE ABSORPTION)	-	10000	Applicable for both Electronic type and Mechanical type gas meter
9("LOCATIONOF VERIFICATIONAND PROTECTION MARKS")	-	20000	Applicable for both Electronic type and Mechanical type gas meter
10.1(Application Conditions for Electronic Gas Meters)	-	10000	Applicable only for Electronic type gas meter
10.2(Influence factors)	-	10000	Applicable only for Electronic type gas meter
10.3(Disturbances)	-	55000	Applicable only for Electronic type gas meter (Include test 11.1 General Requirement, 11.2 Requirements for electronic gas meters fitted with durability protection features)
10.4(Battery Power Supply)	-	20000	Applicable only for Electronic type gas meter
"12.1.5 : ( (Annex B, B-8) "(Tests for Electronic Gas Meters: (Electrical Burst))	-	37000	Applicable only for Electronic type gas meter
"12.1.5 : ( (Annex B, B-9) "(Tests for Electronic Gas Meters: (Electrostatic discharge ))	-	18000	Applicable only for Electronic type gas meter
"12.1.5 : ( (Annex B, B-10) "(Tests for Electronic Gas Meters: (Electromagnetic susceptibility ))	-	62500	Applicable only for Electronic type gas meter

-
Included w.e.f. 15.11.2022

IS 16227 : Part 1 (2016)

Instrument transformers: Part 1 general requirements

5000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.3.1(Power-frequency voltage withstand tests on primary terminals)	-	1000	no comments
7.3.4(Power-frequency voltage withstand tests on secondary terminals)	-	1000	no comments
7.3.6(Verification of markings)	-	3000	no comments

-
Included w.e.f. 20.06.2019 Restricted to Indoor only

IS 13779 (2020)

ac STATIC WATTHOUR METERS CLASS 1 AND 2-Specefication

170500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
12.7.6.2(Impulse voltage test)	-	7000	Complete testing charge Rs 170500 for 3 phase meter and Rs 156167 for single phase meter. For this test Rs 7000 for Single phase meter
12.7.6.3(ac high voltage test)	-	570	573 for Single phase meter
12.7.6.4(Insulation resistance test)	-	570	573 for Single phase meter
11.1(Test on limits of error due to variation of current)	-	1200	1100 for Single phase meter
12.15 & 11.6(Test of meter constant)	-	570	500 for Single phase meter
12.14 & 11.5(Test of starting condition)	-	570	500 for Single phase meter
12.13 & 11.4(Test of no-load condition)	-	570	500 for Single phase meter
12.12 & 11.3(Test of ambient temperature influence)	-	3705	3500 for Single phase meter
11.2(Test on limits of error due to other influence quantities)	-	10640	9000 for Single phase meter
12.7.1(Test of power consumption)	-	712.5	600 for Single phase meter
12.7.2(Test of influence of supply voltage)	-	1900	1600 for Single phase meter
12.7.3(Test of influence of short time over currents)	-	3087.5	3000 for Single phase meter
12.7.4(Test of Influence of self heating)	-	1187.5	900 for Single phase meter
12.7.5(Test of influence of heating)	-	2898	2600 for Single phase meter
12.8(Test of immunity to earth/phase fault)	-	1520	1200 for Single phase meter
12.9.6(Radio Interference Measurement)	-	19000	16500 for Single phase meter
12.9.4(Fast transient burst test)	-	6935	6500 for Single phase meter
12.9.2(Test of Immunity to electrostatic discharge)	-	6935	6500 for Single phase meter
12.9.3(Test of Immunity to electromagnetic HF field)	-	27320	23500 for Single phase meter
12.9.5(Surge Immunity Test)	-	10500	9500 for Single phase meter
12.6.1(Dry heat test)	-	8000	8000 for Single phase meter
12.6.2(Cold test)	-	8930	8930 for Single phase meter
12.6.3(Damp heat cyclic test)	-	8930	8930 for Single phase meter
12.3.2(Vibration test)	-	11590	10881 for Single phase meter
12.3.1(Shock test)	-	7070	6000 for Single phase meter
12.3.3(Spring hammer test)	-	380	380 for Single phase meter
12.5(Test of protection against penetration of dust and water)	-	3477	3400 for Single phase meter
12.4(Test of resistance to heat and fire)	-	5795	5500 for Single phase meter
6.1(General)	-	500	500 for Single phase meter
6.2(Meter Case)	-	500	500 for Single phase meter
6.3(Window)	-	1	for Single phase meter
6.4(Terminals, terminal block and protective earth terminal)	-	500	500 for Single phase meter
6.5(Terminals covers and Extended Terminal Cover)	-	1	for Single phase meter
6.6(Clearance and creepage distances)	-	500	500 for Single phase meter
6.7(Insulating encased meter)	-	1	for Single phase meter
6.10(Display of measured values)	-	1	for Single phase meter
6.11(Output device)	-	1	for Single phase meter
7.1(Name Plate)	-	1	for Single phase meter
7.2(Connection diagrams and terminal marking)	-	1000	1000 for Single phase meter
12.16 & 11.7(Test of repeatability of error)	-	5937.5	5500 for Single phase meter

-
REVISED VERSION OF IS 13779:2020 INCLUDED W.E.F. 23-12-2021.

IS 15884 (2010)

Alternating current direct connected static prepayment meters for active energy (Class 1 And 2) - Specification

800000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.6.1(As per table 10 & 11, cl 5.6.1)	-	1520	Complete testing charges: Rs 520000/- for UC1 single phase meter, Rs 546660/- for UC1 three phase meter, Rs 800000/- for UC2 or UC3 single phase meter, Rs 800000/- for UC2 or UC3 three phase meter. This test charges: Rs 1450, 1520, 1520, 1520
4.6.2(As per table 12)	-	20000	This test charges: Rs 20000/- for UC1 single phase meter, Rs 20000/- for UC1 three phase meter, Rs 20000/- for UC2 or UC3 single phase meter, Rs 20000/- for UC2 or UC3 three phase meter.
4.6.3(Limits of error due to Ambient temperature Variation)	-	4000	This test charges: Rs4000 /- for UC1 single phase meter, Rs4000 /- for UC1 three phase meter, Rs4000 /- for UC2 or UC3 single phase meter, Rs4000 /- for UC2 or UC3 three phase meter.
5.6.7(Test shall be carried out at 0.05Ib and Ib at UPF load under reference conditions. Twenty error samples shall be taken at time-intervals of 30 minutes)	-	6500	This test charges: Rs 6500 /- for UC1 single phase meter, Rs 6500 /- for UC1 three phase meter, Rs 6500 /- for UC2 or UC3 single phase meter, Rs 6500/- for UC2 or UC3 three phase meter.
5.2.1(As per cl 12.3.3 of IS 13779)	-	1250	This test charges: Rs 1250 /- for UC1 single phase meter, Rs 1000/- for UC1 three phase meter, Rs 1250/- for UC2 or UC3 single phase meter, Rs 1250/- for UC2 or UC3 three phase meter.
5.2.2(As per IS 9000 (Part 7/Sec 1))	-	6000	This test charges: Rs 6000/- for UC1 single phase meter, Rs 5500/- for UC1 three phase meter, Rs 6000/- for UC2 or UC3 single phase meter, Rs 6000/- for UC2 or UC3 three phase meter.
5.2.3(As per IS 9000 (Part 8))	-	8000	This test charges: Rs 8750/- for UC1 single phase meter, Rs 8000/- for UC1 three phase meter, Rs 8000/- for UC2 or UC3 single phase meter, Rs 8000/- for UC2 or UC3 three phase meter.
5.2.4(As per IS 11000 (Part 2 / Sec1))	-	2500	This test charges: Rs 3125 /- for UC1 single phase meter, Rs 2500/- for UC1 three phase meter, Rs 2500/- for UC2 or UC3 single phase meter, Rs 2500/- for UC2 or UC3 three phase meter.
5.2.5(Protection against penetration of water (IP1X))	-	2500	This test charges: Rs 3125 /- for UC1 single phase meter, Rs 2500 /- for UC1 three phase meter, Rs 2500/- for UC2 or UC3 single phase meter, Rs 2500/- for UC2 or UC3 three phase meter.
5.2.5(Protection against penetration of dust (IP5X))	-	2500	This test charges: Rs 3125 /- for UC1 single phase meter, Rs 2500 /- for UC1 three phase meter, Rs 2500/- for UC2 or UC3 single phase meter, Rs 2500/- for UC2 or UC3 three phase meter.
5.3.1(according to IS 9000 (Part 3/ Sec 1 to 5))	-	9000	This test charges: Rs 8000 /- for UC1 single phase meter, Rs 8000/- for UC1 three phase meter, Rs 9000/- for UC2 or UC3 single phase meter, Rs 9000/- for UC2 or UC3 three phase meter.
5.3.2(according to IS 9000 (Part 2/Sec 1 to 4))	-	10500	This test charges: Rs 9000 /- for UC1 single phase meter, Rs 9000/- for UC1 three phase meter, Rs 10500/- for UC2 or UC3 single phase meter, Rs 10500/- for UC2 or UC3 three phase meter.
5.4.1(As per 4.4.1.1)	-	2000	This test charges: Rs 2000/- for UC1 single phase meter, Rs 2000/- for UC1 three phase meter, Rs 2000/- for UC2 or UC3 single phase meter, Rs 2000/- for UC2 or UC3 three phase meter.
5.4.2(As per 4.4.2.1)	-	2000	This test charges: Rs 2000/- for UC1 single phase meter, Rs 2000/- for UC1 three phase meter, Rs 2000/- for UC2 or UC3 single phase meter, Rs 2000/- for UC2 or UC3 three phase meter.
5.4.3(Table 8, as per cl4.4.3)	-	140000	This test charges: Rs 98000 /- for UC1 single phase meter, Rs 110000/- for UC1 three phase meter, Rs 140000/- for UC2 or UC3 single phase meter, Rs 140000/- for UC2 or UC3 three phase meter.
5.4.4(Table 9, and cl 4.4.4)	-	2000	This test charges: Rs 1500/- for UC1 single phase meter, Rs 2000/- for UC1 three phase meter, Rs 2000/- for UC2 or UC3 single phase meter, Rs 2000/- for UC2 or UC3 three phase meter.
5.4.5(As per cl 4.4.5)	-	2000	This test charges: Rs 1500/- for UC1 single phase meter, Rs 2000/- for UC1 three phase meter, Rs 2000/- for UC2 or UC3 single phase meter, Rs 2000/- for UC2 or UC3 three phase meter.
5.4.6.2(6 KV, As per cl 12.7.6.2 of IS 13779)	-	7500	This test charges: Rs 7500/- for UC1 single phase meter, Rs 7500/- for UC1 three phase meter, Rs 7500/- for UC2 or UC3 single phase meter, Rs 7500/- for UC2 or UC3 three phase meter.
5.4.6.3(Table 15, power source 500 VA)	-	2000	This test charges: Rs 2000 /- for UC1 single phase meter, Rs 2000/- for UC1 three phase meter, Rs 2000/- for UC2 or UC3 single phase meter, Rs 2000/- for UC2 or UC3 three phase meter.
5.4.6.4(500±50V dc)	-	1500	This test charges: Rs 1500/- for UC1 single phase meter, Rs 1500/- for UC1 three phase meter, Rs 1500/- for UC2 or UC3 single phase meter, Rs 1500/- for UC2 or UC3 three phase meter.
5.5.2(according to IS 14700 (Part 4/Sec 2))	-	6500	This test charges: Rs 6500/- for UC1 single phase meter, Rs 6935/- for UC1 three phase meter, Rs 6500/- for UC2 or UC3 single phase meter, Rs 6500/- for UC2 or UC3 three phase meter.
5.5.3(Table 12 & IS 14700 (Part 4/Sec 3))	-	58000	This test charges: Rs 48000 /- for UC1 single phase meter, Rs 49500/- for UC1 three phase meter, Rs 58000/- for UC2 or UC3 single phase meter, Rs 58000/- for UC2 or UC3 three phase meter.
5.5.4(according to IS 14700 (Part 4/Sec 4))	-	7500	This test charges: Rs 7500/- for UC1 single phase meter, Rs 7500/- for UC1 three phase meter, Rs 7500/- for UC2 or UC3 single phase meter, Rs 7500/- for UC2 or UC3 three phase meter.
5.5.5(according to IEC 62052-11)	-	42000	This test charges: Rs 34000 /- for UC1 single phase meter, Rs 36000/- for UC1 three phase meter, Rs 42000/- for UC2 or UC3 single phase meter, Rs 42000/- for UC2 or UC3 three phase meter.
5.5.6(according to IEC 61000- 4-5)	-	12000	This test charges: Rs 9500 /- for UC1 single phase meter, Rs 10500/- for UC1 three phase meter, Rs 12000/- for UC2 or UC3 single phase meter, Rs 12000/- for UC2 or UC3 three phase meter.
4.6.6.2.2 & G2(Normal operation)	-	7000	This test charges: Rs 7000 /- for UC2 or UC3 single phase meter, Rs 7000/- for UC2 or UC3 three phase meter.
4.6.6.2.2 & G3(Electrical endurance)	-	160230	This test charges: Rs 160230/- for UC2 or UC3 single phase meter, Rs 160230/- for UC2 or UC3 three phase meter.
4.6.6.2.2 & G4(Line to load voltage surge withstand)	-	7000	This test charges: Rs 7000 /- for UC2 or UC3 single phase meter, Rs 7000/- for UC2 or UC3 three phase meter.
4.6.6.2.2 & G5(Fault current making capacity)	-	56000	This test charges: Rs 56000 /- for UC2 or UC3 single phase meter, Rs 56000/- for UC2 or UC3 three phase meter.
4.6.6.2.2 & G6(Short circuit current carrying capacity)	-	38000	This test charges: Rs 38000/- for UC2 or UC3 single phase meter, Rs 38000/- for UC2 or UC3 three phase meter.
4.6.6.2.2 & G7(Minimum switched current)	-	9000	This test charges: Rs 9000/- for UC2 or UC3 single phase meter, Rs 9000/- for UC2 or UC3 three phase meter.
4.6.6.2.2 & G8(Dielectric strength)	-	18500	This test charges: Rs 18500/- for UC2 or UC3 single phase meter, Rs 18500/- for UC2 or UC3 three phase meter.
4.6.6.1 ,annexure D - 3.2.1(Test of crystal Controlled Clocks in Payment Meters)	-	5000	This test charges: Rs 5000 /- for UC1 single phase meter, Rs 5000/- for UC1 three phase meter, Rs 5000/- for UC2 or UC3 single phase meter, Rs 5000/- for UC2 or UC3 three phase meter.
4.6.6.1 ,annexure D - 3.2.2(Test of crystal Controlled Clocks in Payment Meters)	-	5000	This test charges: Rs 5000 /- for UC1 single phase meter, Rs 5000/- for UC1 three phase meter, Rs 5000/- for UC2 or UC3 single phase meter, Rs 5000/- for UC2 or UC3 three phase meter.
4.6.6.1 , annexure D - 3.2.3(Test of crystal Controlled Clocks in Payment Meters)	-	15000	This test charges: Rs 15000 /- for UC1 single phase meter, Rs 15000/- for UC1 three phase meter, Rs 15000/- for UC2 or UC3 single phase meter, Rs 15000/- for UC2 or UC3 three phase meter.
5.3.3(according to IS 9000 (Part 5/Sec 1 and 2))	-	10500	This test charges: Rs 9000/- for UC1 single phase meter, Rs 9000/- for UC1 three phase meter, Rs 8500/- for UC2 or UC3 single phase meter, Rs 10500/- for UC2 or UC3 three phase meter.
5.5.6(Surge Immunity Test)	-	1	This test charges already covered in other
4.6.6.1 , annexure D - 4.1(Test of crystal Controlled Clocks in Payment Meters)	-	25000	This test charges: Rs 25675/- for UC1 single phase meter, Rs 25005/- for UC1 three phase meter, Rs 25000/- for UC2 or UC3 single phase meter, Rs 25000/- for UC2 or UC3 three phase meter.
4.6.6.1 , annexure D - 4.2(Test of crystal Controlled Clocks in Payment Meters)	-	1	This test charges covered in other
4.6.6.1 , annexure D - 4.3(Test of crystal Controlled Clocks in Payment Meters)	-	10000	This test charges: Rs 10000/- for UC1 single phase meter, Rs 10000/- for UC1 three phase meter, Rs 10000/- for UC2 or UC3 single phase meter, Rs 10000/- for UC2 or UC3 three phase meter.
6(Functional Requirements)	-	33500	This test charges: Rs 28500/- for UC1 single phase meter, Rs 28500/- for UC1 three phase meter, Rs 33500/- for UC2 or UC3 single phase meter, Rs 33500/- for UC2 or UC3 three phase meter.
5.9(Test of Consumption-Based charging function)	-	3500	This test charges: Rs 3500/- for UC1 single phase meter, Rs 3500/- for UC1 three phase meter, Rs 3500/- for UC2 or UC3 single phase meter, Rs 3500/- for UC2 or UC3 three phase meter.
5.10(Test of Time-Based charging function)	-	3500	This test charges: Rs 3500/- for UC1 single phase meter, Rs 3500/- for UC1 three phase meter, Rs 3500/- for UC2 or UC3 single phase meter, Rs 3500/- for UC2 or UC3 three phase meter.
3.12.6, 4.6.6.2.1 & 5.1.7(Load Switching Capability (UC1))	-	111200	Applicable only for UC1 This test charges: Rs 85000/- for UC1 single phase meter, Rs 111200/- for UC1 three phase meter,
4.2.12.3(Keypad Interface)	-	2500	This test charges: Rs 2500/- for UC1 single phase meter, Rs 2500/- for UC1 three phase meter, Rs 2500/- for UC2 or UC3 single phase meter, Rs 2500/- for UC2 or UC3 three phase meter.
4.4.2(Table 7)	-	5000	This test charges: Rs 10000/- for UC1 single phase meter, Rs 5000/- for UC1 three phase meter, Rs 5000/- for UC2 or UC3 single phase meter, Rs 5000/- for UC2 or UC3 three phase meter.
4.2(Mechanical Requirements)	-	22500	This test charges: Rs 17500/- for UC1 single phase meter, Rs 9000/- for UC1 three phase meter, Rs 22500/- for UC2 or UC3 single phase meter, Rs 22500/- for UC2 or UC3 three phase meter.
5.6.5(As per cl 4.6.5)	-	1000	This test charges: Rs 1000/- for UC1 single phase meter, Rs 1000/- for UC1 three phase meter, Rs 1000/- for UC2 or UC3 single phase meter, Rs 1000/- for UC2 or UC3 three phase meter.
5.6.4(As per cl 4.6.3, Table 13)	-	1000	This test charges: Rs 1000/- for UC1 single phase meter, Rs 1000/- for UC1 three phase meter, Rs 1000/- for UC2 or UC3 single phase meter, Rs 1000/- for UC2 or UC3 three phase meter.
5.6.3(I= open circuit V= 115% of rated voltage test period 60 000/k minutes)	-	2000	This test charges: Rs 2000/- for UC1 single phase meter, Rs 2000/- for UC1 three phase meter, Rs 2000/- for UC2 or UC3 single phase meter, Rs 2000/- for UC2 or UC3 three phase meter. Combined Charges of startup and no load.

-
Based on 1.5 times of BIS Recognized Govt. lab.

IS 16444 : Part 2 (2017)

AC static transformer operated watthour and var - Hour smart meters, class 0.2 S, 0.5 S and 1.0 S: Part 2 specification transformer operated smart meters

306700 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.12(Test on limits of error)	-	1150	No comment
6.12(Test of starting condition)	-	300	No comment
6.12(Test of meter constant)	-	300	No comment
6.12(Test of no-load condition)	-	300	No comment
6.12(Test of ambient temperature influence)	-	400	No comment
6.12(Test of repeatability of error)	-	3125	No comment
6.12(Test of influence quantities)	-	6000	No comment
6.10.1(Test of power consumption)	-	375	No comment
6.10.2(Test of influence of supply voltage)	-	950	No comment
6.10.3(Test of influence of short time over currents)	-	1500	No comment
6.10.4(Test of influence of self-heating)	-	600	No comment
6.10.5(Test of influence of heating)	-	1400	No comment
6.11(Radio interference measurement)	-	25000	No comment
6.11(Fast transient burst test)	-	7500	No comment
6.11(Test of immunity to electrostatic discharge)	-	6500	No comment
6.11(Test of immunity to electromagnetic HF field)	-	25000	No comment
6.9(Dry heat test)	-	4700	No comment
6.9(Cold test)	-	4700	No comment
6.9(Damp heat cyclic test)	-	8000	No comment
6.5(Vibration test)	-	5625	No comment
6.5(Shock test)	-	4850	No comment
6.5(Spring hammer test)	-	175	No comment
6.5(Test of protection against penetration of dust and water)	-	1875	No comment
6.4(Test of resistance to heat and fire)	-	2800	No comment
6.10.6(Impulse voltage test)	-	3375	No comment
6.10.6(ac high voltage test)	-	500	No comment
6.10.6(Insulation test)	-	500	No comment
7, 9.4(Data Exchange for Electricity Meter Reading, Tariff and Load Control Companion Specification (The requirement as per IS 15959 : Part 1 & Part 3 shall apply))	-	120000	No comment
10.0(Smart Meter Functional Requirements)	-	5000	No comment
8, 9.5(Smart Meter Communicability)	-	35000	No comment
6.10.7(Test of immunity to earth/phase fault)	-	4500	No comment
6.11(Surge Immunity test)	-	10500	No comment
9.3(Test of Display)	-	300	No comment
9.4(Test for Data Exchange Protocol)	-	1	No comment
Note a of Table 1(Accuracy of the meter at pre-defined points)	-	1	No comment
Note b of Table 1(Access and data read test)	-	1	No comment
6.2(General Constructional requirements)	-	5500	No comment
6.3(Clearance and creepage distances)	-	1	No comment
6.8(Marking of meters Name plate)	-	1800	No comment
6.6(Display of measured values)	-	1800	No comment
6.7(Output device)	-	4800	No comment

-
Equipment Type Approval (ETA) of modules for WAN/NAN/IHD shall be approved by designated agency authorized by DoT (Cl.9.5.1).

IS 16227 : Part 2 (2016)

Instrument transformers: Part 2 additional requirements for current transformers

45625 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.13.201.1(Terminal markings: General rules)	-	750	No comments
6.13.201.2(Method of marking)	-	1	No comments
6.13.201.3(Markings to be used)	-	1	No comments
6.13.201.4(Indication of relative polarities)	-	1	No comments
7.2.2(Temperature-rise test)	-	3750	No comments
7.2.201(Short-time current tests)	-	13500	No comments
7.2.6.203(Test for composite error of class P and PR protective current transformers)	-	625	No comments
7.2.6.201(Test for ratio error and phase displacement of measuring current transformers)	-	10000	No comments
7.2.6.202(Determination of the instrument security factor (F S) of measuring current transformers)	-	1250	No comments
7.3.204(Inter-turn overvoltage test)	-	1000	No comments
7.3.201(Determination of secondaty winding resistance)	-	1000	No comments
7.3.203(Test for rated knee point e.m.f. (Ek) and exciting current at Ek)	-	2500	No comments
5.6.202.2.1(Standard accuracy limit factors (ALF ))	-	1250	No comments
7.3.5.206(Turns ratio error)	-	10000	No comments

-
Included w.e.f. 20.06.2019 Restricted to Indoor only

IS 13252 : Part 1 (2010)

Information technology equipment - Safety: Part 1 general requirements (Second Revision)

80000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
1.7(Markings and instructions)	-	2330	Complete testing charges for different product is between Rs 56500 and Rs 80000. For this test charges for different product is between Rs 1646 and Rs 2330
1.6(Power interface .)	-	777	For this test charges for different product is between Rs 549 and Rs 777
2.1(Protection from electric shock and energy hazards)	-	777	For this test charges for different product is between Rs 549 and Rs 777
2.3(TNV circuits)	-	1553	For this test charges for different product is between Rs 1097 and Rs 1553
2.4(Limited current circuits)	-	777	For this test charges for different product is between Rs 549 and Rs 777
2.6(Provisions for earthing and bonding)	-	777	For this test charges for different product is between Rs 549 and Rs 777
2.7(Overcurrent and earth fault protection in primary circuits)	-	777	For this test charges for different product is between Rs 549 and Rs 777
2.2(SELV circuits)	-	1553	For this test charges for different product is between Rs 1097 and Rs 1553
2.8(Safety interlocks)	-	194	For this test charges for different product is between Rs 137 and Rs 194
2.9(Electrical insulation)	-	777	For this test charges for different product is between Rs 549 and Rs 777
2.10(Clearances, creepage distances and distances through insulation)	-	4660	For this test charges for different product is between Rs 3291 and Rs 4660
3.1(General)	-	777	For this test charges for different product is between Rs 549 and Rs 777
3.2(Connection to a mains supply)	-	777	For this test charges for different product is between Rs 549 and Rs 777
3.3(Wiring terminals for connection of external conductors)	-	777	For this test charges for different product is between Rs 549 and Rs 777
4.1(Stability)	-	777	For this test charges for different product is between Rs 549 and Rs 777
4.2(Mechanical strength)	-	777	For this test charges for different product is between Rs 549 and Rs 777
4.3(Design and construction)	-	777	For this test charges for different product is between Rs 549 and Rs 777
4.4(Protection against hazardous moving parts)	-	777	For this test charges for different product is between Rs 549 and Rs 777
4.5(Thermal requirements)	-	9320	For this test charges for different product is between Rs 6583 and Rs 9320
4.6(Openings in enclosures)	-	777	For this test charges for different product is between Rs 549 and Rs 777
4.7(Resistance to fire)	-	6214	For this test charges for different product is between Rs 4388 and Rs 6214
5.1(Touch current and protective conductor curren)	-	777	For this test charges for different product is between Rs 549 and Rs 777
5.2(Electric strength)	-	19417	For this test charges for different product is between Rs 13714 and Rs 19417
5.3(Abnormal operating and fault conditions)	-	4660	For this test charges for different product is between Rs 3291 and Rs 4660
6.1(Protection of telecommunication network service persons, and users of other equipment connected to the network, from hazards in the equipment)	-	777	For this test charges for different product is between Rs 549 and Rs 777
6.2(Protection of equipment users from overvoltages on networks telecommunication)	-	777	For this test charges for different product is between Rs 549 and Rs 777
7.2(Protection of cable distribution system service persons, and users of other equipment connected to the system, from hazardous voltages in the equipment)	-	777	For this test charges for different product is between Rs 549 and Rs 777
7.3(Protection of equipment users from overvoltages on the cable distribution system)	-	5437	For this test charges for different product is between Rs 3840 and Rs 5437
7.4(Insulation between primary circuits and cable distribution systems)	-	7767	For this test charges for different product is between Rs 5485 and Rs 7767
Annex A3(Hot flaming oil test)	-	1	For this test charges for different product
Annex B(Motor tests under abnormal conditions)	-	1	For this test charges for different product is
Annex C(Transformers)	-	1	For this test charges for different product is between
Annex DD(Requirements for the mounting means of a rack mounted equipment)	-	1	For this test charges for different product is between
Annex U(Insulating winding wires for use without interleaved insulation)	-	1	For this test charges for different product is between
Annex K(Thermal Control)	-	1	For this test charges for different product is between
Annex EE(Household and home/ office document/ media shredders)	-	1	For this test charges for different product is between Rs

-
Excluding: Cl. 1.5 (Components), Cl. 2.10.5.4 (Opto-coupler), 2.10.6 (PCB material), Cl. 2.10.8.4 (Abrasion resistance test)`, 3.2.4 (Appliance inlet /connector), Cl. 4.2.8 (Cathode Ray Tubes), Cl. 4.3.8 (Batteries), Cl. 4.3.12 (Flammable liquids), Cl. 4.3.13.2 (Ionizing radiation), Cl. 4.3.13.3/ Annex Y (Effect of UV radiation on material/Ultraviolet conditioning test), Cl. 4.3.13.4 (Human exposure to ultraviolet (UV) radiation), Cl. 4.3.13.5 (LED, laser class)

Bureau of Indian Standards

The National Standards Body of India

Yadav Measurements Pvt Ltd, Udaipur

Plot no. F 373-375, RIICO Bhamashah Industrial Area, Kaladwas, Udaipur (Rajasthan)-313003, Udaipur, Udaipur, Rajasthan, 313003

9829267374 yadav.measurements@yadavmeasurements.com

Scope List