BIS - LIMS (Laboratory Information Management System)

BIS, Bengaluru Branch Laboratory (BNBL)

Peenya Industrial Area, 1st Stage, Tumkur Road, Bengaluru - 560058, Bengaluru, Bengaluru Urban, Karnataka, 560058

- bnbol@bis.gov.in

Scope List

Reset

102 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

IS 710 (2024)

MARINE PLYWOOD - SPECIFICATION (Third Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-5.1 (Veneers)	-
5.1.1 (Defects in veneers)	-
Cl-5.2.1 (Glueing)	-
Cl -5.2.2 (Thickness of Veneers)	-
Cl - 5.2.3.1 (Joint in Veneers)	-
Cl - 5.2.3.2 (Edge joints)	-
Cl - 5.2.3.3 (End joints)	-
Cl - 5.2.3.4 (Scarf joints)	-
Cl - 5.2.4 (Grain Direction)	-
Cl-5.4 (Moisture Content)	-
Cl-6.1 (Dimensions (length))	-
Cl-6.1 (Dimensions (width))	-
Cl-6.2 (Thickness)	-
Cl-6.3 (Squareness)	-
Cl-8.3 (Edge Straightness)	-
Cl-7.1, 7.2, 7.3, 7.4, 7.5 & 7.6 (Workmanship and finish)	-
Cl-9.3 (Moisture Content)	-
Cl-9.4.1 (Glue Adhesion in Dry State- Glue Shear Strength -Average)	-
Cl-9.4.1 (Glue Adhesion in Dry State- Glue Shear Strength –Minimum Individual)	-
Cl-9.4.2 (Adhesion of Plies)	-
Cl-9.4.2 (Glue Adhesion in Dry State- Adhesion of Plies)	-
Cl-9.5.1.1 (Glue Adhesion in Water Resistance - Glue Shear Strength -Average)	-
Cl-9.5.1.1 (Glue Adhesion in Water Resistance - Glue Shear Strength –Minimum Individual)	-
Cl-9.5.1.2 (Water Resistance Test-Adhesion of plies)	-
Cl-9.5.2 (Water Resistance Test)	-
Cl-9.6 (Tensile Strength-Along the grain)	-
Cl-9.6 (Tensile Strength-Across the grain)	-
Cl-9.7 (Mycological Test -Adhesion)	-
Cl-9.7 (Glue Adhesion in Mycological test - Glue Shear Strength -Average)	-
Cl-9.7 (Glue Adhesion in Mycological test - Glue Shear Strength –Minimum Individual)	-
Cl-9.8, Table-2 (Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-
Cl-9.8, Table-2 (Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-
Cl-9.8, Table-2 (Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Average)	-
Cl-9.8, Table-2 (Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Minimum Individual)	-
Cl-9.8, Table-2 (Static Bending Strength - Modulus of Rupture - Along the Face Grain - Average)	-
Cl-9.8, Table-2 (Static Bending Strength - Modulus of Rupture - Along the Face Grain - Minimum Individual)	-
Cl-9.8, Table-2 (Static Bending Strength - Modulus of Rupture - Across the Face Grain - Average)	-
Cl-9.8, Table-2 (Static Bending Strength - Modulus of Rupture - Across the Face Grain - Minimum Individual)	-
Cl-9.9, Table-3 (i) a (Wet Bending Strength- Modulus of Elasticity (MOE)- Average)	-
Cl-9.9, Table-3 (i) b (Wet Bending Strength- Modulus of Elasticity (MOE),-Minimum individual)	-
Cl-9.9, Table-3 (ii) a (Wet Bending Strength- Modulus of Rupture (MOR)-Average)	-
Cl-9.9, Table-3 (ii) b (Wet Bending Strength- Modulus of Rupture (MOR), -Minimum individual)	-
Cl-11.1 (Marking)	-
Cl-11.3 (Marking)	-

-
Except Clause No.4, Clause No.5.3, Clause No.9.10, Clause No.9.11, Clause No.9.12

IS 303 (2024)

Plywood for General Purposes â Specification (Fourth Revision)

Please see remarks View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl. 4 (Grades)	-
Cl-5.1 (Classification by appearance)	-
Cl.5.1 (Type based on classification by appearance)	-
Cl.5.2 (Quality Requirements of Plywood for General Purposes)	-
Cl-5.2, Table- 1 (i) (Blister)	-
Cl-5.2, Table- 1 (ii) (Checks)	-
Cl-5.2, Table- 1 (iii) (Discolouration)	-
Cl-5.2, Table- 1 (iv) (Dote)	-
Cl-5.2, Table- 1 (v) (Insect hole)	-
Cl-5.2, Table- 1 (vi) (Joints)	-
Cl-5.2, Table- 1 (vii) (Knots (dead))	-
Cl-5.2, Table- 1 (viii) (Pin knots (dead))	-
Cl-5.2, Table- 1 (ix) (Pin knots (live))	-
Cl-5.2, Table- 1 (x) (Knots (tight))	-
Cl-5.2, Table- 1 (xi) (Patches)	-
Cl-5.2, Table- 1 (xii) (Splits)	-
Cl-5.2, Table- 1 (xiii) (Swirl)	-
Cl-5.2, Table-2 (Maximum Number of Categories of Permissible Defects, per m2)	-
Cl-8.1 (Dimensions -length)	-
Cl.8.1 (Dimensions -width)	-
Cl-8.2 (Thickness of the plywood boards)	-
Cl-8.3 (Squareness)	-
Cl.8, 8.3 & Annex C (Edge Squareness)	-
Cl.8, 8.3 & Annex C (Edge Straightness)	-
Cl-8.3 (Edge Straightness)	-
Cl-9 (WORKMANSHIP AND FINISH)	-
Cl-11.3.1, 11.3.1.1 (Water Resistance Test)	-
Cl-11.3.2 (Mycological Test)	-
Cl-11.4 (Moisture Content)	-
Cl-11.5, Table 4 (Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-
Cl-11.5, Table 4 (Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-
Cl-11.5, Table-4 (Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Average)	-
Cl-11.5, Table-4, (Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Minimum Individual)	-
Cl-11.5, Table-4 (Static Bending Strength - Modulus of Rupture - Along the Face Grain - Average)	-
Cl-11.5, Table-4 (Static Bending Strength - Modulus of Rupture - Along the Face Grain - Minimum Individual)	-
Cl-11.5, Table-4 (Static Bending Strength - Modulus of Rupture - Across the Face Grain - Average)	-
Cl-11.5, Table-4 (Static Bending Strength - Modulus of Rupture - Across the Face Grain - Minimum Individual)	-
Cl-13 (Marking)	-

-
Except Clause No.6, Clause No.7, Clause No.11.6, Clause No.11.7, Clause No.11.8

IS 302 : Part 1 (2024)

Household and Similar Electrical Appliances â Safety Part 1 General Requirements (Seventh Revision)

Safety of Household and Similar Electrical Appliances , single phase , up to 5kW , max size 900 x 900 x 900 mm

Rs. 16,812 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4 (General requirement)	-
5 (General conditions for the tests)	-
6 (Classification- IS 302-1)	-
7.1 (Marking- IS 302-1)	-
7.1 (Marking- IS 302-1)	-
7.1 (Marking- IS 302-1)	-
7.1 (Marking- IS 302-1)	-
7.1 (Marking- IS 302-1)	-
7.1 (Marking- IS 302-1)	-
7.1 (Marking- IS 302-1)	-
7.3 (Marking- IS 302-1)	-
7.4 (Marking- IS 302-1)	-
7.5 (Marking- IS 302-1)	-
7.6 (Marking- IS 302-1)	-
7.7 (Marking- IS 302-1)	-
7.8 (Marking- IS 302-1)	-
7.9 (Marking- IS 302-1)	-
7.1O (Marking- IS 302-1)	-
7.11 (Marking- IS 302-1)	-
7.13 (Marking- IS 302-1)	-
7 (Marking and instructions)	-
7.15 (Marking- IS 302-1)	-
8.1.1 (Protection against live parts in all positions)	-
8.1.2 (Protection against live parts in openings)	-
8.1.3 (Protection against live parts in visible glowing heating elements)	-
8.1.4 (Protection against live parts against protective impedance)	-
8.1.5 (Live parts of built-in appliances)	-
10.1 (Power input)	-
10.2 (Current input)	-
11.1 (General)	-
11.2 (General)	-
11.3 (Heating)	-
11.4 (Heating appliances)	-
11.5 (Motor-operated appliances)	-
11.6 (Combined appliances)	-
11.7 (Duration corresponding)	-
11.8 (Temperature rise)	-
13 (Leakage current and electric strength at operating temperature)	-
13.2 (Leakage current at operating temperature)	-
13.3 (Electric Strength at operating temperature)	-
14 (Transient Over Voltages)	-
15.0 (Moisture resistance)	-
15.1 (Ingress Protection test other than IPX0 (IP test))	-
15.2 (Spillage Test)	-
15.3 (Humidity Test)	-
16.0 (General)	-
16.1 (General)	-
16.2 (Leakage Current (after Clause 15))	-
16.3 (Electric Strength (after clause 15 and 16.2))	-
17 (Overload protection of transformers and associated circuits)	-
19 (Abnormal Operation)	-
19.7 (Abnormal Operation, IS 302-1)	-
19.8 (Abnormal Operation, IS 302-1)	-
19.9 (Abnormal Operation, IS 302-1)	-
19.13 (Abnormal Operation as per Cl 19, IS 302-1)	-
19.13 (Abnormal Operation as per Cl 19, IS 302-1)	-
20.1 (Stability & Mechanical Hazards, IS 302-1)	-
20.2 (Stability & Mechanical Hazards, IS 302-1)	-
21.1 (Mechanical Strength, IS 302-1)	-
21.2 (Mechanical Strength, IS 302-1)	-
21.3 (Mechanical Strength, IS 302-1)	-

-
List of Products under the Scope: 1. Appliances for Heating Liquids – Egg Boilers 2. Appliances for Heating Liquids – Electric steam Cookers 3. Appliances for Heating Liquids – Electric slow Cookers 4. Appliances for Heating Liquids – Milk heaters 5. Appliances for Heating Liquids – Electric Kettle 6. Electric Call Bells and Buzzers for Indoor Use 7. Electric Coffee Makers 8. Wet Grinders 9. Frying Pans 10. Electric Water Boilers 11. Electric Hot Plates

IS 1660 (2024)

Wrought and Cast Aluminium Utensils Specification ( Second Revision )

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-3.1.1, 3.1.2 (Minimum Thickness of Sheet)	-
Cl-3.1.3, Table-2 (Minimum Thickness at the Bottom)	-
Cl-3.1.3, Table-2 (Minimium Thickness of Wall at the Top Edge)	-
Cl-3.1.3, Table-2 (Minimum Cover Thickness)	-
Cl 3.1.4 Table 3 (Amendment No.1) (Thickness of cast cookware- Cast Aluminium- Minimum Base Thickness of Body)	-
Cl-4.1.1 (Minimum thickness of lid)	-
Cl-4.1.2 (Minimum thickness of glass)	-
Cl-4.1.2 (Minimum thickness of rim)	-
Cl-5 (Fabrication)	-
Cl-6 (Shape and Dimensions)	-
Cl-7.1 (Handles, when fitted)	-
Cl-7.2 (Handles)	-
Cl-7.3 (Cl- 4.1 of IS 13395) (Construction)	-
Cl-7.3 (Cl- 4.2 of IS 13395) (Materials)	-
Cl-7.3 (Cl- 4.3 of IS 13395) (Selection and Size)	-
Cl-7.3 (Cl- 4.4 of IS 13395) (Position of Handle and Knob with Respect to Cookware)	-
Cl-7.3 (Cl- 4.5 of IS 13395) (Attachment to Cookware)	-
Cl-7.3 (Cl- 5.2 of IS 13395) (Bending Strength)	-
Cl-7.3 (Cl- 5.3 of IS 13395) (Torque Strength)	-
Cl-7.3 (Cl- 5.4 of IS 13395) (Impact Strength)	-
Cl-7.3 (Cl- 5.5 of IS 13395) (Fatigue Resistance)	-
Cl-7.3 (Cl- 5.6 of IS 13395) (Leakage)	-
Cl-7.3 (Cl- 5.7 of IS 13395) (Thermal Insulation)	-
Wrought and Cast Aluminium Utensils — Specification (Heat Resistance)	-
Cl-7.3 (Cl- 5.10 of IS 13395) (Burning Resistance)	-
Cl-8 (Workmanship and Finish)	-
Wrought and Cast Aluminium Utensils — Specification (Lid of the cookware)	-
Cl-8.7 (The thickness test, adhesion test)	-
Cl-8.7 (Minimum thickness of coating)	-
Cl-8.7.1 (Dry heat the cookware)	-
Cl-8.9 (Test for Induction compatible base)	-
Cl-8.10.2 (Tests for Lunch Boxes- Ground Nut Oil Test for Leakage)	-
Cl-8.11.1 (Test(s) on Tempered Glass Lid- Fragmentation Test)	-
Cl-8.11.2 (Test(s) on Tempered Glass Lid-Ball Drop Test)	-
Cl-8.11.3 (Test(s) on Tempered Glass Lid- Thermal Shock Test)	-
Cl-8.11.4 (Test(s) on Tempered Glass Lid- Free Fall Test)	-
Cl-9.1 (Normal Capacity)	-
Cl-9.2 (Normal Capacity of internal diameter)	-
Cl-8.3 (Utensils, if anodized, fully or partially)	-
Cl-8.3 (Minimum nominal thickness)	-
Cl-8.3 (Thickness of hard anodized)	-
Cl-8.3 (Finish and appearance of hard anodized)	-
Cl-8.3 (Abrasion resistance of hard anodized)	-
Cl-8.3 (Colour of hard anodized)	-
Cl-8.3 (Hardness of hard anodized)	-
Cl-8.5 (Non-stick unreinforced PTFE)	-

-
Except Clause No. 4, Clause No. 8.6, Clause No. 8.8, Clause No. 8.9, Clause No. 8.10.1

IS 13422 (2024)

Single-use Sterile Rubber Surgical Gloves ï¿½ Specification (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-7.1 (Dimensions)	-
Cl-7.2 (Watertightness)	-
Cl-7.3.2 (Force at break and elongation at break before accelerated ageing)	-
Cl-7.3.3 (Force at break and elongation at break after accelerated ageing)	-
Cl-7.3.4 (Force required to produce 300 % elongation)	-

-
Except Cl.5 (Materials), Cl.6

IS 260 (2024)

Aluminium Sulphate, Non - Ferric ï¿½ Specification (Third Revision)

Check Test charges remark View breakup
Testing charges for Aluminium Sulphate, Non-Ferric - Specification as per IS 260:2024, Technical Grade: Rs. 2450.50 Testing charges for Aluminium Sulphate, Non-Ferric - Specification as per IS 260:2024, Pure Grade- Rs. 4286.50 Testing charges for Aluminium Sulphate, Non-Ferric - Specification as per IS 260:2024, Analytical Reagent (AR) Grade- Rs. 4636.50

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-4.1 (Description)	-
Cl-4.2, Table-1 (i) (Insoluble matter, percent by mass, Max)	-
Cl-4.2, Table-1 (ii) (pH (of 5 percent solution), Min)	-
Cl-4.2, Table-1 (iii) (Heavy metals (as Pb), ppm, Max)	-
Cl-4.2, Table-1 (iv) (Iron (as Fe), percent by mass, Max)	-
Cl-4.2, Table-1 (v) (Chlorides)	-
Cl-4.2, Table-1 (vi) (Arsenic (as As2O3), ppm, Max)	-
Cl-4.2, Table-1 (vii) (Ammonium salts (as NH3), percent by mass, Max)	-
Cl-4.2, Table-1 (viii) (Aluminum (as Al2O3), percent by mass)	-

-
-

IS 15848 (2025)

ZINC SULPHATE, MONOHYDRATE, AGRICULTURAL GRADE - SPECIFICATION ( First Revision)

8250 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-3.1 (Description)	-
Cl-3.2, Table-1 (i) (Zinc (as Zn), percent by mass, Min)	-
Cl-3.2, Table-1 (ii) (Magnesium (as Mg), percent by mass, Max)	-
Cl-3.2, Table-1 (iii) (Copper (as Cu), percent by mass, Max)	-
Cl-3.2, Table-1 (iv) (Lead (as Pb), percent by mass, Max)	-
Cl-3.2, Table-1 (v) (pH of 5 percent solution (m/v), Min)	-
Cl-3.2, Table-1 (vi) (Matter insoluble in water, percent by mass, Max)	-
Cl-3.2, Table-1 (vii) (Iron (as Fe), percent by mass, Max)	-
Cl-3.2, Table-1 (viii) (Sulphur (as S), percent by mass, Max)	-
Cl-3.2, Table-1 (ix) (Cadmium (as Cd), percent by mass, Max)	-
Cl-3.2, Table-1 (x) (Arsenic (as As2O3), percent by mass, Max)	-

-
-

IS 330 (2023)

CHROMIUM TRIOXIDE - SPECIFICATION Third Revision

4430 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-4.1 (Description)	-
Cl-4.2 (Solubility)	-
Cl-4.3, 4.4 Table-1 (i) (Chromium trioxide (as CrO3), percent by mass, Min)	-
Cl-4.3, 4.4 Table-1 (ii) (Matter insoluble in water, percent by mass, Max)	-
Cl-4.3, 4.4 Table-1 (iii) (Sulphates (as SO4), percent by mass, Max)	-
Cl-4.3, 4.4 Table-1 (iv) (Alkali salts (as Na2O), percent by mass, Max)	-
Cl-4.3, 4.4 Table-1 (v) (Chlorides (as Cl), percent by mass, Max)	-
Cl-4.3, 4.4 Table-1 (vi) (Nitrates (as NO2), percent by mass, Max)	-
Cl-4.4, Table-2 (ii) (Iron (as Fe), percent by mass, Max)	-

-
-

IS 249 (2022)

SODIUM BICHROMATE TECHNICAL SPECIFICATION

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.1 (Description)	-
3.2 , Table No. 1 , i) (Free moisture and combined water)	-
3.2 , Table No. 1 , ii) (Sodium bichromate (Na2Cr2O7) content)	-
3.2 , Table No. 1 , iii) (Sulphates (as Na2SO4))	-
3.2 , Table No. 1 , iv) (Chlorides ( as NaCl ),)	-
3.2 , Table No. 1 , v) (Calcium compounds (as CaSO4),)	-
3.2 , Table No. 1 , vi) (Matter insoluble in water)	-
3.2 , Table No. 1 , vii) (pH value (of aqueous solution))	-

-
-

IS 398 : Part 6 (2021)

Aluminium Conductors For Overhead Transmission Purposes Part 6: High conductivity aluminium alloy stranded conductors

High Conductivity Aluminium Alloy Stranded Conductors

Please see remarks View breakup
For stranded conductors with 7 strands - Rs 4200 For stranded conductors with 19 strands - 22 hrs Rs 6600 For stranded conductors with 37 strands- 30 hrs Rs 9000 For stranded conductors with 61 strands- 50 hrs Rs 15000

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
16.2 (Visual Examination)	-
16.3, Table 4 (Measurement of Lay Ratio / Direction of Lay)	-
16.3, Table 4 (Measurement of Lay Ratio / Direction of Lay)	-
16.3, Table 4 (Measurement of Lay Ratio / Direction of Lay)	-
16.3, Table 4 (Measurement of Lay Ratio / Direction of Lay)	-
16.4, Table 2 (Measurement of Diameter of Individual Aluminium Alloy Wires)	-
16.5, Table 2 (Breaking Load Test - before stranding)	-
16.5, Table 2 (Breaking Load Test - after stranding)	-
16.6, Table 1 (Elongation Test - before stranding)	-
16.6, Table 1 (Elongation Test - after stranding)	-
16.7, Table 2 (Resistivity Test)	-
16.8 (Wrapping Test)	-
11 (Stranding)	-
8 (Freedom from defects)	-

-
-

IS 7224 (2006)

Iodized salt, vacuum evaporated iodized salt and refined iodized salt - Specification (Second Revision)

7440 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Clause 4.3 Table 1 (Moisture content)	-
Clause 4.3 Table 1 (water insoluble matter)	-
Clause 4.3 Table 1 (Chloride Content(as Nacl))	-
Clause 4.3 Table 1 (Matter soluble in water other than sodium chloride)	-
Clause 4.3 Table 1 (Calcium (as Ca))	-
Clause 4.3 Table 1 (Magnesium (as mg))	-
Clause 4.3 Table 1 (Sulphate (as SO4 ),)	-
Clause 4.3 Table 1 (Iodine content, a) Manufacturers Level )	-
Clause 4.3 Table 1 (b) Distribution channel including retailer)	-
Clause 4.3 Table 1 (Alkalinity (as Na2CO3),)	-
Clause 4.3 Table 1 (Lead as (Pb))	-
Clause 4.3 Table 1 (Arsenic(as As))	-
Clause 4.3 Table 1 (Iron(as Fe))	-
Clause no4.1 (Description)	-
Clause 4.2 (Particle Size)	-
4.4 (Anticaking agents (Potassium Ferrocyanide))	-

-
-

IS 14756 (2024)

Stainless Steel Utensils - Specification (THIRD REVISION)

Rs. 9462 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 4.2 (Thickness of the finished utensil)	-
Cl 4.3 (Classification)	-
Cl 5.1 (Manufacturing defect & visual appearance)	-
CL 5.2 (Accessibility for cleaning)	-
Cl 5.4 (Requirement for handles)	-
Cl 5.6 (Finish of 3-ply utensil)	-
Cl 5.8 (Coating thickness test)	-
Cl 5.8.1 (Thermal shock test (Coating))	-
Cl 6.1 (Staining Test (Type Test - Frequency Once in a Year))	-
Cl 6.2 (Mechanical Shock Test (for Cladded Utensils Only))	-
Cl 6.3 (Thermal Shock Test (for Cladded Utensils Only))	-
Cl 6.4 (Dry Heat Test (for Cladded Utensils Only))	-
Cl 6.5 (Coating Thickness Test (for Copper Deposit))	-
Cl 6.6 (Thermal shock test (3-ply construction utensil body))	-
Cl 6.7 (Nominal Capacity Test)	-
5.4 of IS 13395 (Impact Strength)	-
4.4 of Is 13395 (Position of Handle and Knob with Respect to Cookware)	-
4.5 of IS 13395 (Attachment to Cookware)	-
5.2 of IS 13395 (Bending Strength)	-
5.3 of IS 13395 (Torque Strength)	-
5.5 of IS 13395 (Fatigue Resistance 15 000 cycles withstand)	-
5.8 of IS 13395 (Heat Resistance)	-
5.10 of IS 13395 (Burning Resistance)	-
6.7.2 (Internal diameter of utensil)	-
6.1 (Staining Test)	-
4.2 of IS 13395 (Materials)	-
4.3 of IS 13395 (Selection and Size)	-
Cl 3.5 (Material used for tempered glass lid)	-
Cl 3.5 (Material used for stainless steel rim)	-
4.1 of IS 13395 (Construction)	-
5.6 of IS 13395 (Leakage)	-
5.7 of IS 13395 (Thermal Insulation)	-

-
Expect material testing

IS 17787 (2021)

Medical Textiles Nonwoven Wipes Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Clause 6.1, Table 1, (iii) (Total viable count, (cfu/g), Max)	-
Clause 6.1, Table 1, (iv) (Pseudomonas aeruginosa)	-
Clause 6.1, Table 1, (v) (Staphylococcus aureus)	-
Clause 6.1, Table 1, (vi) (Candida albicans)	-
Clause 6.1, Table 1, (vii) (E. coli)	-
Clause 6.1, Table 1, (ii) (pH)	-

-
-

IS 14543 (2024)

Packaged Drinking Water Other than Packaged Natural Mineral Water Specification Third Revision

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-5.2.9 (V.parahaemolyticus)	-
Cl-5.3, Table-1 (ii) (Odour)	-
Cl-5.3, Table-1 (iii) (Taste)	-
Cl-5.3, Table-1 (iv) (Turbidity, nephelometric turbidity unit (NTU), Max)	-
Cl-5.3, Table-1 (v) (Total dissolved solids, mg/l, Max)	-
Cl-5.3, Table-1 (vi) (pH)	-
Cl-5.3, Table-2 (i) (Barium (as Ba))	-
Cl-5.3, Table-2 (ii) (Copper (as Cu))	-
Cl-5.3, Table-2 (iii) (Iron (as Fe))	-
Cl-5.3, Table-2 (iv) (Manganese (as Mn))	-
Cl-5.3, Table-2 (v) (Nitrate (as NO3 ))	-
Cl-5.3, Table-2 (vi) (Nitrite (as NO2 ))	-
Cl-5.3, Table-2 (vii) (Fluoride (as F))	-
Cl-5.3, Table-2 (viii) (Zinc (as Zn))	-
Cl-5.3, Table-2 (ix) (Silver (as Ag))	-
Cl-5.3, Table-2 (x) (Aluminium (as A1))	-
Cl-5.3, Table-2 (xi) (Chloride (as Cl))	-
Cl-5.3, Table-2 (xii) (Selenium (as Se))	-
Cl-5.3, Table-2 (xiii) (Sulphate (as SO4 ))	-
Cl-5.3, Table-2 (xiv) (Alkalinity (as HCO3 ))	-
Cl-5.3, Table-2 (xv) (Calcium (as Ca))	-
Cl-5.3, Table-2 (xvi) (Magnesium (as Mg))	-
Cl-5.3, Table-2 (xvii) (Sodium (as Na))	-
Cl-5.3, Table-2 (xviii) (Residual free chlorine)	-
Cl-5.3, Table-2 (xx) (Mineral oil)	-
Cl-5.3, Table-2 (xxii) (Sulphide)	-
Cl-5.3, Table-2 (xxiii) (Antimony (as Sb))	-
Cl-5.3, Table-2 (xxiv) (Borates (as B))	-
Cl-5.3, Table-2 (xxv) (Bromates (as BrO3 ))	-
Cl-5.3, Table-3 (i) (Mercury (as Hg))	-
Cl-5.3, Table-3 (ii) (Cadmium (as Cd))	-
Cl-5.3, Table-3 (iii) (Arsenic (as As))	-
Cl-5.3, Table-3 (v) (Lead (as Pb))	-
Cl-5.3, Table-3 (vi) (Chromium (as Cr))	-
Cl-5.3, Table-3 (vii) (Nickel (as Ni))	-
Cl-5.3, Table-3 (viii) (Polychlorinated biphenyl (PCB))	-
Cl-5.3, Table-3 (ix) (Polynuclear aromatic hydrocarbons)	-
Cl-5.3, Table-3 (x) (Uranium)	-
Cl-5.2.1 (Escherichia coli or thermotolerant bacteria)	-
Cl-5.2.2 (Coliform)	-
Cl-5.2.3 (Faecal streptococci)	-
Cl-5.2.3 (Staphylococcus aureus)	-
Cl-5.2.4 (Sulphite Reducing Anaerobes)	-
Cl-5.2.5 (Pseudomonas Aeruginosa)	-
Cl-5.2.6 (Aerobic Microbial Count @ 37 deg C)	-
5.2.6 (Aerobic Microbial Count @ 20 to 22 deg C)	-
Cl-5.2.7 (Yeast and mould)	-
Cl-5.2.8 (Salmonella)	-
Cl-5.2.8 (shigella)	-
Cl-5.2.9 (Vibrio cholera)	-
Cl-5.2.9 (V.parahaemolyticus)	-
5.3 (Appearance)	-
Cl-5.4 (ii) (Total pesticide residue)	-

-
Test facility not available for Cyanide, Anionic surface active agents, Phenolic compounds, Radio active residues

IS 12818 (2010)

Unplasticized polyvinyl chloride (Pvc - U) screen and casing pipes for bore/tubewells - Specification (Second Revision)

Rs.6450.00 View breakup
Rs 6450/- Excluding effect on water test

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

-
-

IS 14756 (2017)

Stainless steel cookware - Specification (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

-
-

IS 17569 (2021)

Insulated Containers for Food Storage — Specification

Please See Remerk View breakup
Costoftotalmanhours Rs. 4350 Totalelectricity consumption: Rs. 81 Totalcostofconsumables: Rs. 550 Chargesforpreparationoftestreport Rs. 600 Testingchargesfortheproduct: Rs. 4981 Totaltimeforthepurposeoftimenorms Hrs. 60.5

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5 (Manufacture and Workmanship)	-
7.3 (Capacity)	-
7.4 (Heat Retention Capability)	-
7.5 (Cold Retention Capability)	-
7.6.1 (Drop Impact Test)	-
7.6.2 (Pendulum Impact Test)	-
7.8 (Test for Strength of Shoulder Strap)	-
7.9 (Leakage Test)	-
7.10 (Joint Leak Test)	-
7.11 (Staining Test)	-
7.13.1 (Length of the Shoulder Strap)	-
7.13.2 (Stability of Insulated Container)	-
7.13.3 (Cleaning)	-

-
Except Material Testing, Seepage and PUF, Strength of handle test

IS 17526 (2021)

STAINLESS STEEL VACUUM FLASKS - SPECIFICATION

Please see remarks View breakup
Costoftotalmanhours Rs. 4350 Totalelectricity consumption: Rs. 81 Totalcostofconsumables: Rs. 550 Chargesforpreparationoftestreport Rs. 600 Testingchargesfortheproduct: Rs. 4981 Totaltimeforthepurposeoftimenorms Hrs. 60.5

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5 (Manufacture and Workmanship)	-
5.3 (Manufacture and Workmanship)	-
7.3 (Capacity)	-
7.4 (Heat Retention Capability)	-
7.5 (Cold Retention Capability)	-
7.6.1 (Drop Impact Test)	-
7.6.2 (Pendulum Impact Test)	-
7.7 (Fixing Strength of the Handle)	-
7.8 (Test for Strength of Shoulder Strap)	-
7.8.1 (Test for strength of cord)	-
7.9 (Leakage Test)	-
7.10 (Joint Leak Test)	-
7.11 (Staining Test)	-
7.12 (Length of the Shoulder Strap)	-
7.13 (Stability of Flask/Bottle)	-
7.14 (Pour Test)	-
7.2 (Arrangement for holding and suspension)	-

-
-

IS 14756 (2022)

Draft Indian Standard STAINLESS STEEL COOKWARE SPECIFICATION Second Revision of IS 14756

Please See Remerk View breakup
Costoftotalmanhours Rs. 8250 Totalelectricity consumption: Rs. 981 Totalcostofconsumables: Rs. 500 Chargesforpreparationoftestreport Rs. 600 Testingchargesfortheproduct: Rs. 9731 Totaltimeforthepurposeoftimenorms Hrs. 123

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1 (Annex A) (Shapes and Dimensions)	-
4.2 (Shapes and Dimensions)	-
5.1 (Workmanship and Finish)	-
5.2 (Workmanship and Finish)	-
5.3 (Workmanship and Finish)	-
5.3 (Workmanship and Finish)	-
5.3 (Workmanship and Finish)	-
5.3 (Workmanship and Finish)	-
5.4 (Workmanship and Finish)	-
6.1 (Staining Test)	-
6.1 (Staining Test)	-
6.2 (Mechanical Shock Test (For Cladded Utensils only))	-
6.3 (Thermal Shock Test (For Cladded Utensils only))	-
6.4 (Dry Heat Test (For Cladded Utensils only))	-
6.5 (Coating Thickness Test (For Copper Deposit))	-
6.6 (3 Ply)	-
6.7.1 (Nominal Capacity Test)	-
6.7.2 (Nominal Capacity Test- Diameter)	-
6.8.1 (Tests on Tempered Glass Lid)	-
6.8.2 (Tests on Tempered Glass Lid (Ball drop test))	-
6.8.3 (Tests on Tempered Glass Lid (thermal shock test))	-
6.8.4.1 (Tests on Tempered Glass Lid (Free Fall Test with rim facing down))	-
6.8.4.2 (Tests on Tempered Glass Lid (Free Fall Test without rim facing down))	-
CL-5.4(CL-4.1 of IS 13395) (Construction)	-
CL-5.4(CL-4.4 of IS 13395) ("Position of Handle and Knob with Respect to Cookware")	-
CL-5.4(CL-5.2 of IS 13395) (Bending Strength)	-
CL-5.4(CL-5.3 of IS 13395) (Torque Strength)	-
CL-5.4(CL-5.4 of IS 13395) (Impact Strength)	-
CL-5.4(CL-5.5 of IS 13395) (Fatigue Resistance)	-
CL-5.4(CL-4.2 of IS 13395) (Materials)	-
CL-5.4(CL-4.3 of IS 13395) (Selection and Size)	-
CL-5.4(CL-5.8 of IS 13395) (Heat Resistance)	-
CL-5.4(CL-5.10 of IS 13395) (Burning Resistance)	-

-
Expect material testing

IS 17790 (2022)

INSULATED FLASK FOR DOMESTIC USE SPECIFICATION

Please See Remerk View breakup
Totalelectricity consumption: Rs. 81 Totalcostofconsumables: Rs. 650 Chargesforpreparationoftestreport Rs. 600 Testingchargesfortheproduct: Rs. 5531 Totaltimeforthepurposeoftimenorms Hrs. 63.25

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.0 (Manufacture and Workmanship)	-
7.2 (Capacity)	-
7.3 (Heat Retention Capability)	-
7.4 (Cold Retention Capability)	-
7.5.1 (Drop Impact Test)	-
7.5.2 (Pendulum Impact Test)	-
7.6 (Fixing Strength of the Handle)	-
7.7 (Test for Strength of Shoulder Strap)	-
7.8 (Test for strength of cord)	-
7.9 (Leakage Test)	-
7.10 (Joint Leak Test)	-
7.11 (Staining Test)	-
7.15 (Test for length of the shoulder cap)	-
7.16 (Stability of Flask)	-
7.17 (Pour Test)	-

-
Expect material test, PUF test, Seepage test, Lever operating test, Endurance test

IS 12786 (2024)

Irrigation equipment - Polyethylene pipes for irrigation laterals - Specification (first revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.2(a) (Carbon Black Content-IS 2530)	-
4.2(b) (Carbon Black Dispersion-IS 2530)	-
3 (Class of Pipe)	-
5.1 & Table 1 (Dimensions of Pipes - Outside diameters)	-
5.1 & Table 1 (Dimensions of Pipes - Wall thickness)	-
6 (Visual Appearance)	-
7.1 & Table 2 (Hydraulic Characteristics)	-
7.1 & Table 2 (Hydraulic Characteristics)	-
7.2 (Reversion Test)	-
7.3 (Tensile Strength)	-
7.3 (Elongation at Break)	-
7.4 (SusceptibiIity to Environmental Stress Cracking)	-

-
-

IS 3319 (1995)

Blades, surgical, detachable (Bard Parker Type) and handles - Specification (Fourth Revision)

Rs.1650/- View breakup
For physical tests(Excluding Sterility Test) Rs 2860/- for chemical tests Carbon Steel Blade Rs. 3360/- for chemical tests Stainless steel blade & Rs. 3360/- for chemical tests for Handle

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
8,8.1 (Sterilization)	-

-
Available only for Micro

IS 302 : Part 2 : Sec 15 (2009)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 15 appliances for heating liquids (First Revision)

pressure cookers having a rated cooking pressure not exceeding 140 kPa and a rated capacity not exceeding 10 l

9800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6 (Classification- IS 302-1)	-
6 (Classification- IS 302-1)	-
7.1 (Marking- IS 302-1)	-
7.1 (Marking- IS 302-1)	-
7.1 (Marking- IS 302-1)	-
7.1 (Marking- IS 302-1)	-
7.1 (Marking- IS 302-1)	-
7.1 (Marking- IS 302-1)	-
7.1 (Marking- IS 302-1)	-
7.1 (Marking- IS 302-1)	-
7.1 (Marking- IS 302-2-15)	-
7.3 (Marking- IS 302-1)	-
7.4 (Marking- IS 302-1)	-
7.5 (Marking- IS 302-1)	-
7.6 (Marking- IS 302-1)	-
7.7 (Marking- IS 302-1)	-
7.8 (Marking- IS 302-1)	-
7.1O (Marking- IS 302-1)	-
7.11 (Marking- IS 302-1)	-
7.12 (Marking- IS 302-2-15)	-
7.12 (Marking- IS 302-1)	-
7.12.1 (Marking- IS 302-1)	-
7.12.3 (Marking- IS 302-1)	-
7.12.5 (Marking- IS 302-1)	-
7.12.6 (Marking- IS 302-1)	-
7.13 (Marking- IS 302-1)	-
7.14 (Marking- IS 302-1)	-
7.15 (Marking- IS 302-1)	-
7.101 (Marking- IS 302-2-15)	-
8 (Protection Against Electric Shock, IS 302-1)	-
10 (Power Input and Current, IS 302-1)	-
11 (Heating, IS 302-1)	-
11 (Heating, IS 302-1)	-
11 (Heating, IS 302-1)	-
11 (Heating, IS 302-1)	-
13 (Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-
13 (Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-
15.1 (Moisture Resistance, IS 302-1)	-
15.2 (Spillage test as 15.2, IS 3.02-1 & 302-2-15)	-
16 (Leakage current as per Cl 16, IS 302-1)	-
16 (LEAKAGE CURRENT AND ELECTRIC STRENGTH)	-
19.13 (Abnormal Operation as per Cl 19, IS 302-1)	-
19.13 (Abnormal Operation as per Cl 19, IS 302-1)	-
20.1 (Stability & Mechanical Hazards, IS 302-1)	-
21.1 (Mechanical Strength, IS 302-1)	-
21.2 (Mechanical Strength, IS 302-1)	-
22.1 (Construction, IS 302-1)	-
22.7 (Construction as per Cl 22.7, IS 3.02-2-15)	-
22.107 (Construction as per Cl 22.7, IS 3.02-2-15)	-
22.108 (Construction as per Cl 22.8, IS 3.02-2-15)	-
23.1 (Internal Wiring, IS 302-1)	-
23.2 (Internal Wiring, IS 302-1)	-
23.4 (Internal Wiring, IS 302-1)	-
23.5 (Internal Wiring, IS 302-1)	-
23.6 (Internal Wiring, IS 302-1)	-
23.7 (Internal Wiring, IS 302-1)	-
23.8 (Internal Wiring, IS 302-1)	-
23.9 (Internal Wiring, IS 302-1)	-
23.1O (Internal Wiring, IS 302-1)	-
25.1 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.2 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.5 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.6 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.8 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.9 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.1 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.11 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.12 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.13 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.14 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.14 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.15 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.16 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.17 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.18 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.19 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.2 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.21 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.22 (Supply Connection and External Flexible Cords, IS 302-1)	-
26 (Terminals for External Conductors, IS 302-1)	-
27.1 (Provision for Earthing, IS 302-1)	-
27.2 (Provision for Earthing, IS 302-1)	-
27.3 (Provision for Earthing, IS 302-1)	-
27.4 (Provision for Earthing, IS 302-1)	-
27.5 (Provision for Earthing, IS 302-1)	-
28 (Screws & Connections, IS 302-1)	-
29.1 (Clearances, Creepage distances and Solid Insulation, IS 302-1)	-
29.2 (Clearances, Creepage distances and Solid Insulation, IS 302-1)	-
30.1 (Resistance to Heat and Fire, IS 302-1)	-
30.2 (Resistance to Heat and Fire, IS 302-1)	-
31 (Resistance of Rusting, IS 302-1)	-

-
-

IS 261 (2023)

COPPER SULPHATE SPECIFICATION

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1 (Description ( IS 261 : 2023))	-
4.2Table 1 (i) (Copper ( IS 261 : 2023))	-
4.2 Table 1 (ii) (Matter insoluble in water ( IS 261 : 2023))	-
4.2 Table 1 (iii) (Soluble iron and aluminium compounds (as Fe) ( IS 261 : 2023))	-
4.2 Table 1 (iv) (pH value ( IS 261 : 2023))	-
4.2 Table 1 (v) (Chloride (as Cl) ( IS 261 : 2023))	-
4.2 Table 1 (vi) (Arsenic (as As₂O₃) ( IS 261 : 2023))	-
4.2 Table 1 (vii) (Lead and zinc ( IS 261 : 2023))	-

-
Complete test facility available for Technical grade

IS 1165 (2022)

WHOLE MILK POWDER - SPECIFICATION (Sixth Revision of IS 1165)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.1 (Discription)	-
3.2 (Flavour and Taste)	-
3.3 (extraneous matter)	-
Clause 3.5,Table 1 ,Sl No i) (Moisture)	-
Clause 3.5,Table 1 ,Sl No ii) (Total solids)	-
Clause 3.5,Table 1 ,Sl No iii) (Milk fat)	-
Clause 3.5,Table 1 ,Sl No iv) (Milk protein in milk solids not fat)	-
Clause 3.5,Table 1 ,Sl No v) (Insolubility index)	-
Clause 3.5,Table 1 ,Sl No vi) (Total ash(on dry basis))	-
Clause 3.5,Table 1 ,Sl No vii) (Titratable acidity (lactic acid),)	-
Clause 3.5,Table 1 ,Sl No viii) (Scorched particle)	-
Clause 3.7,Table 3, Sl No i) (Lead)	-
Clause 3.5,Table 2 ,Sl No i) (Aerobic plate count)	-
Clause 3.5,Table 2 ,Sl No ii) (Coliform Count)	-
Clause 3.5,Table 2 ,Sl No iii) (Staphylococcus aureus(Coagulase positive))	-
Clause 3.5,Table 2 ,Sl No iv) (Yeast and mould count)	-
Clause 3.5,Table 2 ,Sl No v) (Salmonella sp)	-
Clause 3.5,Table 2 ,Sl No vi) (Listeria monocytogenes)	-
Clause 3.5,Table 2 ,Sl No vii) (Bacillus cereus)	-
Clause 3.5,Table 2 ,Sl No viii) (Sulphite reducing clostridia)	-
Clause 3.5,Table 2 ,Sl No ix) (E. coli)	-

-
Test facility not available for Melamine

IS 2347 (2023)

DOMESTIC PRESSURE COOKER ï¿½ SPECIFICATION

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4 (Capacity)	-
4.2 (Body Capacity)	-
6 (Construction)	-
6.1 (Pressure Regulating Device)	-
6.1.1 (Pressure Regulating Device)	-
6.1.1 (Minimum Inside diameter of Vent Pipe.)	-
6.1.2 (Pressure Regulating Device)	-
6.1.3 (Pressure Regulating Device)	-
6.1.4 (Pressure Regulating Device)	-
6.1.5 (Pressure Regulating Device)	-
6.1.6 (Pressure Regulating Device)	-
6.2 (Safety Relief Device)	-
6.2.1 (Safety Relief Device)	-
6.2.2 (Safety Relief Device)	-
6.2.3 (Safety Relief Device)	-
6.3.1 (Temperature Responsive Safety Relief Device)	-
6.3.2 (Temperature Responsive Safety Relief Device)	-
6.4.1.1 (Handles and Knobs)	-
6.4.2 (Handles and Knobs)	-
6.7 (Internal Level Marking)	-
6.8 (Internal Level Marking)	-
7.1 (WORKMANSHIP AND FINISH)	-
7.2 (WORKMANSHIP AND FINISH)	-
7.3 (WORKMANSHIP AND FINISH)	-
7.4 (WORKMANSHIP AND FINISH)	-
8.1 (Air Pressure Test)	-
8.2 (Proof Pressure Test)	-
8.3.1 (Operating Test for Pressure Regulating Device)	-
8.4.1 (Test for Safety Relief Device)	-
8.4.2 (Test for Safety Relief Device)	-
8.4.2 NOTE (Test for Safety Relief Device)	-
8.5 (Bursting Pressure Test)	-
8.6.1 (Tests for Removal of Lid under Pressure For Outer Lid Cooker)	-
8.6.2 (Tests for Removal of Lid under Pressure For inner Lid Cooker)	-
8.6.3 (Tests for Removal of Lid under Pressure: For Cooker Fastened by Screw Clamps or Any Other Locking Device)	-
8.7 (Test for Spring Loaded Mechanism)	-
8.8 (Test for stainless steel cookers)	-
8.9 ("For stainless steel, aluminium induction compatible base and 3 ply cooker")	-
8.10 (Testing of Handles of the cooker)	-
8.10 Note 3 (Testing of Handles of the cooker)	-
8.10 Note 4 (Testing of Handles of the cooker)	-
8.10 Note 5 (Testing of Handles of the cooker)	-
8.10 Note 6 (Testing of Handles of the cooker)	-
8.11.1 (External Coating)	-
8.12 (Internal Coating)	-
8.14 (Ply construction cooker Body )	-
8.15.1 (Fragmentation Test on Tempered Glass lid)	-
8.15.2 (Ball Drop Test on Tempered Glass lid)	-
8.15.3 (Thermal Shock Test on Tempered Glass lid)	-
8.15.4.1 ("Free Fall Test ( Glass lid with rim) ")	-
8.15.4.2 (Glass lid without rim)	-
8.16 (PRD with chain)	-
8.17 (Test for Effectiveness for Induction Bottom)	-
8.3.1 (Operating Test for Pressure Regulating Device)	-
8.4.1 (Test for Safety Relief Device)	-

-
Except Material Testing

IS 333 (2023)

POTASSIUM PERMANGANATE SPECIFICATION

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-4.1 (Description)	-
Cl-4.2,Table-1,sl.no-i (Potassium permanganate (as KMnO4) content,)	-
Cl-4.2,Table-1,sl.no-ii (Insoluble matter)	-
Cl-4.2,Table-1,sl.no-iii ( Chlorides (as Cl))	-
Cl-4.2,Table-1,sl.no-iv (Sulphate (as SO4))	-
Cl-4.2,Table-1,sl.no-v (Nitrogen compounds (as N))	-
Cl-4.2,Table-1,sl.no-vi (Arsenic (as As2O3),)	-
Cl-4.2,Table-1,sl.no-vii (Loss on heating at 110 °C)	-

-
-

IS 14781 (2000)

Sodium thiosulphate - Specification

Rs. 6960 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1 (Description)	-
4.3, Table No - 1 , 1), i) (Sodium thiosulphate (as Na2S203.5H20). percent by mass)	-
4.3, Table No - 1 , 1), ii) (pH of 10 percent solution)	-
4.3, Table No - 1 , 1), iii) (Insoluble matter and metals other than alkali metals, percent by mass, Max)	-
4.3, Table No - 1 , 1), iv) (Sodium sulphide (as Na.$G), percent by mass, Max)	-
4.3, Table No - 1 , 1), v) (Heavy metals (as Pb), percent by mass, Max)	-
4.3, Table No - 1 , 1), vi) (Iron (as Fe), percent by mass, Max)	-
4.3, Table No - 1 , 1), vii) (Calcium (as Ca). percent by mass, Max)	-
4.3, Table No - 1 , 1), viii) (Sulphate and sulphite (as SO4), percent by mass, Max)	-
4.3, Table No - 1 , 1), ix) (Arsenic (as As2O3), percent by mass, Max)	-
4.2 (Solution in Water)	-

-
-

IS 4408 (1979)

Specification for sodium chloride, analytical reagent (First Revision)

Please see remarks. View breakup
Cost of total manhours Rs.6150 Total electricity consumption: Rs. 126 Total cost of consumables: Rs. 1000 Charges for preparation of test report Rs. 450 Testing charges for the product: Rs. 7726 Total time for the purpose of time norms 27.5

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
2.1 (Description)	-
2.2, Table 1,(i) (Sodium chloride, percent by mass, Min)	-
2.2, Table 1,(ii) (Sulphate ( as SO4 ), percent by mass, Max)	-
2.2, Table 1,(iii) (Nitrate ( as NO3 ), percent by mass, Max)	-
2.2, Table 1,(iv) (Phosphates ( as PO4 ), percent by mass, Max)	-
2.2, Table 1,(v) (Iron ( as Fe ), percent by mass, Max)	-
2.2, Table 1,(vi) (Heavy metals (as Pb), percent by mass, Max)	-
2.2, Table 1,(vii) (Barium (as Ba), percent by mass, Max)	-
2.2, Table 1,(viii) (Calcium and magnesium together ( as Ca ), percent by mass, Max)	-
2.2, Table 1,(ix) (Potassium (as K), percent by mass, Max)	-
2.2, Table 1,(x) (Ammonium salts ( as NH4 ), percent by mass, Max)	-
2.2, Table 1,(xi) (Arsenic (as As), percent by mass, Max)	-
2.2, Table 1,(xii) (pH of 10 percent solution)	-
2.2, Table 1,(xiii) (Bromide and iodide ( as Br ), percent by mass, Max)	-
2.2, Table 1,(xiv) (Insoluble matter, percent by mass, Max)	-
2.2, Table 1,(xv) (Ferrocyanide [ at Fe ( CN )6 ] percent by mass, Max)	-

-
-

IS 2052 (2023)

Compounded feeds for cattle ï¿½ Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl no.4.1 (General)	-
Cl no.4.3,7.1, Table no. 1(i) (Moisture)	-
Cl no.4.3,7.1, Table no. 1(ii) (Crude protein (N × 6.25))	-
Cl no.4.3, 7.1,Table no. 1(iii) (Crude fat)	-
Cl no.4.3 ,7.1, Table no. 1(iv) (Crude fibre)	-
Cl no.4.3 ,7.1, Table no. 1(v) (Acid insoluble ash)	-
Cl no.4.3,7.1Table no. 1(vi) ("Salt (as NaCl based on Na or Cl), percent by mass")	-
Cl no.4.3 7.1,Table no. 1(vii) (Calcium (as Ca))	-
Cl no.4.3,7.1,Table no. 1(viii) (Total phosphorus)	-
Cl no.4.3 ,7.1, Table no. 1(xv) (Cadmium)	-

-
Exclusion Except Available phosphorus,Urea,Vitamin A,Vitamin D3,Vitamin E and Aflatoxin B1

1
2
3
Next
Last

Bureau of Indian Standards

The National Standards Body of India

BIS, Bengaluru Branch Laboratory (BNBL)

Peenya Industrial Area, 1st Stage, Tumkur Road, Bengaluru - 560058, Bengaluru, Bengaluru Urban, Karnataka, 560058

- bnbol@bis.gov.in

Scope List

No Record Found

No Record Found