BIS - LIMS (Laboratory Information Management System)

BIS, Bengaluru Branch Laboratory (BNBL)

Peenya Industrial Area, 1st Stage, Tumkur Road, Bengaluru - 560058, Bengaluru, Bengaluru Urban, Karnataka, 560058

- bnbol@bis.gov.in

Scope List

Reset

131 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Exclusion

Testing Charges (Excl. Of Taxes)

Facility Type

Effective Date

Validity Date

Remark

121

IS 10086 (1982)

Specificaton for moulds for use in tests of cement and concrete

Rs 14700/- and Material testing charges as per relevan View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 5.1 (Construction)	-
Cl 5.3 (Arangement for fastening / Clamping)	-

Partial

-
Test facility not available for Material Testing

122

IS 398 : Part 1 (1996)

Aluminium conductors for overhead transmission purposes - Specification: Part 1 aluminium stranded conductors (Third Revision)

All

Rs.1600/- for 7 strands, Rs.3750/- for 19 strands View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
12.2, Table-1 (Measurement of diameter of individual aluminium wire)	-
12.3, Table-1 (Breaking load before stranding)	-
12.3, Table-1 (Breaking load after stranding)	-
12.4 (Wrapping test)	-
12.5, Table 1 (Resistance test)	-
12.6, Table 3 (Measurement of lay ratio)	-
9.3 (Stranding)	-
6 (Freedom from defects)	-

Partial

-
-

123

IS 1165 (2002)

Milk powder - Specification (First Revision)

- View breakup
The complete testing charges for the product are Rs.5215x2=Rs.10430.00

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.1 (Description)	-
3.2 (Flavour and Taste)	-
3.4.5 (Moisture)	-
3.5 (Bacterial count)	-
3.5.2 (Coliform count)	-
3.5.3 (Staphylococcus Aureus)	-
3.5.4 (Salmonella)	-
3.5.5 (Shigella)	-
3.4.5 (Total solids)	-
3.4.5 (Fat)	-
3.4.5 (Insolubility index)	-
3.4.5 (Total ash)	-
3.4.5 (Titratable acidity (lactic acid))	-

Partial

-
-

124

IS 1507 (1977)

Specification for copper oxychloride water dispersible powder concentrates

Rs 2700/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl.2.1 (Description)	-
Cl. 2.3, Table-1 (Copper Content)	-
Cl. 2.3, Table-1 (Suspensibility)	-
Cl. 2.3, Table-1 (pH of one percent aqueous dispersion)	-

Complete

-
-

125

IS 1011 (2002)

Biscuits - Specification (Fourth Revision)

Rs.3280/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6.3 Table 2 i (Moisture)	-
6.3 Table 2 ii (Acid insoluble ash (on dry basis))	-
6.3 Table 2 iii (Acidity of extracted fat (as oleic acid))	-
6.1 (General Requirement)	-

Complete

-
-

126

IS 12701 (1996)

Rotational moulded polyethylene water storage tanks - specification (First Revision)

- View breakup
Rs. 9385/- + Material Testing charges as per relevant referred ISs

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.2.3 (Carbon Black Content )	-
4.2.3 (Carbon Dispersion Test)	-
5.1 Table 1 (Dimensioas of Cylinderical Vertical Tank)	-
5.1 Table 1 (Dimensioas of Cylinderical Vertical Tank)	-
5.1 Table 1 (Dimensioas of Cylinderical Vertical Tank)	-
5.1 Table 1 (Dimensioas of Cylinderical Vertical Tank)	-
5.1 Table 1 (Dimensioas of Cylinderical Vertical Tank)	-
5.1 Table 1 (Dimensioas of Cylinderical Vertical Tank)	-
5.1 Table 1 (Dimensioas of Cylinderical Vertical Tank)	-
5.1 Table 1 (Dimensioas of Cylinderical Vertical Tank)	-
5.2 Table 2 (Dimensions of Rectangular Loft Tanks)	-
5.2 Table 2 (Dimensions of Rectangular Loft Tanks)	-
5.2 Table 2 (Dimensions of Rectangular Loft Tanks)	-
5.2 Table 2 (Dimensions of Rectangular Loft Tanks)	-
5.2 Table 2 (Dimensions of Rectangular Loft Tanks)	-
5.2 Table 2 (Dimensions of Rectangular Loft Tanks)	-
5.3 (Types and Features )	-
7.1.1 (Resistance to Deformation)	-
7.1.2 (Resistance to Deformation)	-
7.2 (Resistance to Impact)	-
7.4 (Tensile Strength)	-
7.5 (Flexural Modulus)	-
7.6 (overall Migration)	-
6.1 (Finish)	-
9.2.1 (Man-Hole and Hand-Hole Lids)	-
9.2 (Man-Hole and Hand-Hole Lids)	-
9.1 (Lid Thickness)	-
7.3 (Test for Top Load Resistance)	-
6.1 (Finish)	-
5.4 (Wall Thickness above effective height)	-
5.2 Table 2 (7) (Minimum Wall Thickness)	-
5.1 Table 1 (7) (Minimum Weight of Tank (Without Lid))	-
9.1 (Man-Hole and Hand-Hole Lids)	-
7.6 (overall Migration)	-

Partial

-
Above 300Ltrs

127

IS 12786 (1989)

Irrigation equipment - Polyethylene pipes for irrigation laterals - Specification

- View breakup
Rs. 7800.00 (Excluding Testing Charges for Material Test) Rs. 3600.00 (Testing Charges for Material Test)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1.c & 4.2.a (Carbon Black content - IS 2530 : 1963)	-
4.2.b (The dispersion of Carbon Black content shall be satisfactory - IS 2530 : 1963)	-
4.1.c & 4.2.a (Carbon Black content - IS 2530 : 1963)	-
7.3 (Tensile Test)	-
7.3 (Elongation at Break)	-
7.4 (SusceptibiIity to Environmental Stress Cracking)	-
5 and Table 1 (DIMENSIONS OF PIPES - outside diameters)	-
5 and Table 1 (DIMENSIONS OF PIPES - wall thickness shall)	-
7.2 (Reversion Test)	-
3.1 (Class of Pipe)	-
6.1 (Visual Appearance)	-
7.1 (Hydraulic Characteristics)	-
7.1 (Hydraulic Characteristics)	-

Partial

-
-

128

IS 455 (2015)

Portland slag cement - Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6 - Table - 1 i (Insoluble residue - Cl 6.9 of IS 4032:1985)	-
6 - Table - 1 ii (Magnesia - Cl 6.8 of IS 4032:1985)	-
6 - Table - 1 iii (Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 6.11 of IS 4032:1985)	-
6 - Table - 1 iv (Sulphide sulphur (S) - Cl 6.12 of IS 4032:1985)	-
6 - Table - 1 v (Loss on ignition - Cl 6.2 of IS 4032:1985)	-
6 - Table - 1 vi (Chloride content - Cl 4.13 of IS 4032:1985)	-
6 - Table - 1 vii ( Alkali content as (Na2O + 0.658 K2O) - Cl 4.11 of IS 4032:1985)	-
7 Table 1 iv c (Compretsive Strenqth 672 ± 4 hr IS 4031(Part 6))	-
7 Table 1 iv b (Compretsive Strenqth 168 ± 2 hr IS 4031(Part 6))	-
7 Table 1 iv a (Compretsive Strenqth .72 ± 1 hr IS 4031(Part 6))	-
7 Table 1 iii b (Setting Time ( by Vicat Apparatus ), Final IS 4031(Part 5))	-
7 Table 1 iii a (Setting Time ( by Vicat Apparatus ),Initial IS 4031(Part 5))	-
7 Table 1 ii b (Soundness, Autoclave expansion IS 4031(Part 3) )	-
7 Table 1 ii a (Soundness, Le-Chate1ier expansion IS 4031(Part 3) )	-
7 Table 1 i (Fineness IS 4031(Part 2))	-

Partial

-
Expect Transverse Strength

129

IS 2347 (2017)

Domestic pressure cooker - Specification (Sixth Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
8.1 (testing of handles of the cooker)	-
8.9 (Test for Spring Loaded Mechanism)	-
8.8 (Test for Spring Loaded Mechanism)	-
8.6.2 (Tests for Removal of Lid under Pressure For inner Lid Cooker)	-
8.6.1 (Tests for Removal of Lid under Pressure For Outer Lid Cooker)	-
8.5 (Bursting Pressure Test)	-
8.6.2 (Tests for Removal of Lid under Pressure For inner Lid Cooker)	-
8.6.1 (Tests for Removal of Lid under Pressure For Outer Lid Cooker)	-
8.5 (Bursting Pressure Test)	-
8.4 (Test for Safety Pressure Relief Device)	-
8.3 (Operating Test for Pressure Regulating Device)	-
8.2 (Proof Pressure Test)	-
8.1 (Air Pressure Test)	-
7.4 (WORKMANSHIP AND FINISH)	-
7.3 (WORKMANSHIP AND FINISH)	-
7.2 (WORKMANSHIP AND FINISH)	-
7.1 (WORKMANSHIP AND FINISH)	-
6.4.1.1 (Handles and Knobs)	-
6.2.2 (Safety Relief Device)	-
6.2.1 (Safety Relief Device)	-
6.2 (Safety Relief Device)	-
6.1.5 (Pressure Regulating Device)	-
6.1.4 (Pressure Regulating Device)	-
6.1.3 (Pressure Regulating Device)	-
6.1.2 (Pressure Regulating Device)	-
6.1.1 (Pressure Regulating Device)	-
6.1 (Pressure Regulating Device)	-
6 (CONSTRUCTION)	-
4.1 (Capacity)	-
6.4.1 (Handles and Knobs)	-
6.1.1 (Construction - Pressure Regulating Device)	-
6.2 NOTE (Construction-Safety Relief Device)	-
6.3 (Construction-Temperature Responsive Pressure Relief Device)	-
6.3.1 (Temperature Responsive Pressure Relief Device)	-
6.3.1 (Temperature Responsive Pressure Relief Device)	-
6.4.1 (Construction - Handles and Knobs)	-
8.4 Annex H-1.1 (Test for SPRD - For Destructible Devices )	-
8.4 Annex H-1.2 (Test for SPRD - For Resettable Devices )	-
8.4 (Test for SPRD)	-
8.10 (a) (Handles of the cooker- Resistance to Burning)	-
8.10 (b) (Handles of the cooker- Heat Resistance)	-
8.10 (c) (Handles of the cooker- Torque Strength)	-
8.10 (d) (Handles of the cooker- Bending Strength)	-
8.10 (e) (Handles of the cooker- Fatigue Resistance)	-
8.10 (f) (Handles of the cooker- Thermal Insualtion Test)	-
8.10 NOTES (3) (Handles of the cooker - Proof Pressure)	-
8.10 NOTES (4) (Handles of the cooker)	-
8.10 NOTES (5) (Handles of the cooker)	-
8.10 NOTES (6) (Handles of the cooker)	-
8.11 (External Coating )	-
8.12 (Internal Coating)	-
8.14 (3 Ply Construction Cooker Body)	-

Partial

-
Except Material Testing

130

IS 1489 (Part 1) (2015)

Portland pozzolana cement - Specification: Part 1 fly Ash Based

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6 - Table - 1 i (Insoluble residue - Cl 7.4 of IS 4032:1985)	-
6 - Table - 1 ii (Magnesia - Cl 7.2 of IS 4032:1985)	-
6 - Table - 1 iii (Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 7.3 of IS 4032:1985)	-
6 - Table - 1 iv (Loss on ignition - Cl 7.1 of IS 4032:1985)	-
6 - Table - 1 v (Chloride content - Cl 4.13 of IS 4032:1985)	-
6 - Table - 1 vi ( Alkali content as (Na2O + 0.658 K2O) - Cl 4.11 of IS 4032:1985)	-
7 -Table 2- vi (Drying Shrinkage- IS 4031 Part 10)	-
7 -Table 2- iv- c (Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-
7 -Table 2- iv- b (Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-
7 -Table 2- iv- a (Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-
7 -Table 2- iv- b (Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-
7 -Table 2- iv- a (Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-
7 -Table 2-iii- b (Setting Time Final- 4031 Part 5)	-
7 -Table 2- iii- a (Setting Time Initial- 4031 Part 5)	-
7 -Table 2- ii- b (Expansion by Autoclave- 4031 Part 3)	-
7 -Table 2- i (Fineness 4031 Part 2)	-
7 -Table 2- ii- a (Expansion after aeration - 4031 Part 3)	-
7 -Table 2- ii- b (Expansion after aeration- 4031 Part 3)	-
7 -Table 2- ii- a (Expansion by Le Chatelier- 4031 Part 3)	-

Partial

-
Expect Transverse Strength

131

IS 269 (2015)

Ordinary portland cement - Specification (Sixth Revision)

33 GR 43GR 53 GR

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6.1 Table-2 i. (Ratio of percentage of lime to percentage of silica, alumina and iron oxide)	-
6 - Table - 1 ii (Ratio of percentage of alumina to that of iron oxide - Cl 4 of IS 4032:1985)	-
6.1 Table-2 iii. (Insoluble residue)	-
6.1 Table-2 iv (Magnesia)	-
6 - Table - 1 v (Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 4.9 of IS 4032:1985)	-
6.1 Table-2 vi (Loss on ignition)	-
6 - Table - 1 vii (Chloride content - Cl 4.13 of IS 4032:1985)	-
6.1 Table-2 viii (Alkali content)	-
7 Table-3 iv c (Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-
7 Table-3 iv b (Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-
7 Table-3 iv a (Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-
7 Table-3 iii b (Setting Time Final)	-
7 Table-3 iii a (Setting Time Initial)	-
7 Table-3 ii b (Expansion by Autoclave)	-
7 Table-3 i. (Fineness)	-
7 Table-3 ii a (Expansion by Le Chatelier)	-
7 Table-3 ii a (Expansion after aeration)	-
7 Table-3 ii b (Expansion after aeration)	-

Partial

-
Expect Transverse Strength

Bureau of Indian Standards

The National Standards Body of India

BIS, Bengaluru Branch Laboratory (BNBL)

Peenya Industrial Area, 1st Stage, Tumkur Road, Bengaluru - 560058, Bengaluru, Bengaluru Urban, Karnataka, 560058

- bnbol@bis.gov.in

Scope List