BIS - LIMS (Laboratory Information Management System)

Standard Testing Laboratory Private Limited

PLOT NO.782,KANJHAWALA INDUSTRIAL AREA,NEW DELHI,NORTH WEST, Delhi, North West, Delhi, 110081

9310136320 standardtestinglaboratory@yahoo.com

Scope List

Reset

77 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

IS 6603 (2001)

Stainless steel bars and flats - Specification (First Revision)

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1(Carbon -Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.)	-	500	Complete Testing Charges Rs 12000
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1(Sulphur- Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.)	-	500	Complete Testing Charges Rs 12000
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1(Phosphorus- Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.)	-	500	Complete Testing Charges Rs 12000
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1(Manganese- Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.)	-	500	Complete Testing Charges Rs 12000
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1(Silicon- Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.)	-	500	Complete Testing Charges Rs 12000
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1(Chromium- Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.)	-	500	Complete Testing Charges Rs 12000
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1(Nickel -Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.)	-	500	Complete Testing Charges Rs 12000
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1(Molybdenum- Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.)	-	500	Complete Testing Charges Rs 12000
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1(Titanium- Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.)	-	300	Complete Testing Charges Rs 12000
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1(Niobium- Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.)	-	500	Complete Testing Charges Rs 12000
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1(Others (Nitrogen)- Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.)	-	1000	Complete Testing Charges Rs 12000
Cl.14.1(Corrosion Resistance- IS 10461(Part1))	-	4000	Complete Testing Charges Rs 12000
6(Freedom from defects:)	-	500	Complete Testing Charges Rs 12000
9.1, Table 3(0.2 Percent Proof Stress, MPa)	-	1000	Complete Testing Charges Rs 12000
9.2, Table 3(Tensile Strength, MPa)	-	1000	Complete Testing Charges Rs 12000
9.3, Table 3(Elongation ,Percent)	-	1000	Complete Testing Charges Rs 12000
9.4, Table 3(Annealed Hardness, HB-IS 1500: Pt 1)	-	1000	Complete Testing Charges Rs 12000
12(Dimensions & Tolerances, mm-IS 6603)	-	800	Complete Testing Charges Rs 12000
Cl.14.1(Corrosion Resistance- IS 10461(Part2))	-	6000	Complete Testing Charges Rs 12000
12(Diameter, mm)	-	500	Complete Testing Charges Rs 12000
12(Out of Round , mm)	-	500	Complete Testing Charges Rs 12000
12(Length , mm)	-	500	Complete Testing Charges Rs 12000
12(Variation in Straightness)	-	500	Complete Testing Charges Rs 12000

10 Apr, 2028

-
-

IS 6528 (1995)

Stainless steel wire - Specification (First Revision)

8000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Table 7(Workmanship)	-	500	Complete Testing Charges Rs 8000
Cl 9.1 & Table 3(Diameter & Out Of Round)	-	800	Complete Testing Charges Rs 8000
Cl 10(UTM)	-	3000	Complete Testing Charges Rs 8000
Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1)(Carbon)	-	500	Complete Testing Charges Rs 8000
Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1)(Sulphor)	-	500	Complete Testing Charges Rs 8000
Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1)(Phosphorous)	-	500	Complete Testing Charges Rs 8000
Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1)(Manganese)	-	500	Complete Testing Charges Rs 8000
Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1)(Silicon)	-	500	Complete Testing Charges Rs 8000
Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1)(Chromium)	-	500	Complete Testing Charges Rs 8000
Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1)(Molybdenum)	-	500	Complete Testing Charges Rs 8000
Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1)(Nickel)	-	500	Complete Testing Charges Rs 8000
Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1)(Copper)	-	500	Complete Testing Charges Rs 8000
Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1)(Aluminium)	-	500	Complete Testing Charges Rs 8000
Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1)(Titanium)	-	500	Complete Testing Charges Rs 8000
Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1)(Nitrogen)	-	1000	Complete Testing Charges Rs 8000
Cl 6(Workmanship)	-	500	Complete Testing Charges Rs 8000
Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1)(Vanadium)	-	500	Complete Testing Charges Rs 8000
Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1)(Boron)	-	500	Complete Testing Charges Rs 8000

10 Apr, 2028

-
-

IS 11513 (2017)

Hot rolled carbon steel strip for cold rolling purposes - Specification (Second Revision)

6000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 8(Workmanship)	-	500	Complete Testing Charges Rs 6000
Cl 9(Length, Width, Thickness, Crown, Edge Camber & Difference in Thickness Across Width )	-	800	Complete Testing Charges Rs 6000
6.1(Carbon %)	-	500	Complete Testing Charges Rs 6000
6.1(Manganese %)	-	500	Complete Testing Charges Rs 6000
6.1(Phosphorus %)	-	500	Complete Testing Charges Rs 6000
6.1(Sulphur %)	-	500	Complete Testing Charges Rs 6000
6.1( Copper %)	-	500	Complete Testing Charges Rs 6000
6.1( Aluminium %)	-	500	Complete Testing Charges Rs 6000
6.1(Silicon %)	-	500	Complete Testing Charges Rs 6000
6.1(Microalloying)	-	1500	Complete Testing Charges Rs 6000
6.1(Boron)	-	500	Complete Testing Charges Rs 6000
6.1( Nb)	-	500	Complete Testing Charges Rs 6000
6.1(V)	-	500	Complete Testing Charges Rs 6000
6.1( Ti)	-	500	Complete Testing Charges Rs 6000
6.1( Nitrogen%)	-	1000	Complete Testing Charges Rs 6000

10 Apr, 2028

-
-

IS 1161 (2014)

Steel tubes for structural purposes - Specification (Fifth Revision)

7000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause - 5.1, Table-3( CARBON)	-	500	Complete Testing Charges Rs 7000
Clause - 5.1, Table-3(SULPHUR)	-	500	Complete Testing Charges Rs 7000
Clause - 5.1, Table-3(PHOSPHURS)	-	500	Complete Testing Charges Rs 7000
Clause - 5.1, Table-3(MANGANESE)	-	500	Complete Testing Charges Rs 7000
Clause - 5.1, Table-3(NITROGEN)	-	1000	Complete Testing Charges Rs 7000
Clause - 5.1, Table-3(SILICON)	-	500	Complete Testing Charges Rs 7000
Clause - 5.1, Table-3( ALUMINIUM)	-	500	Complete Testing Charges Rs 7000
5 AND AS PER IS 10748(COPPER)	-	500	Complete Testing Charges Rs 7000
5 AND AS PER IS 10748(MICRO ALLOY)	-	1500	Complete Testing Charges Rs 7000
5 AND AS PER IS 10748(CARBON EQUIVALENT)	-	1500	Complete Testing Charges Rs 7000
8 AND AS PER IS 4736(MASS OF ZINC COATING)	-	750	Complete Testing Charges Rs 7000
8 AND AS PER IS 4736(UNIFORMITY OF ZINC COATING)	-	750	Complete Testing Charges Rs 7000
Cl 6(Outer Diameter, Thickness & Mass)	-	800	Complete Testing Charges Rs 7000
Cl 7(Workmanship)	-	500	Complete Testing Charges Rs 7000
Cl 8(Workmanship)	-	500	Complete Testing Charges Rs 7000
Cl 9(Workmanship)	-	500	Complete Testing Charges Rs 7000
Cl 11(Tensile Test, Flattening Test & Cold Bend Test)	-	2000	Complete Testing Charges Rs 7000
Cl 13(Workmanship)	-	500	Complete Testing Charges Rs 7000

10 Apr, 2028

-
-

IS 1079 (2017)

Hot rolled carbon steel sheet, plate and strip - Specification (Seventh Revision)

7000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1(Carbon %)	-	500	Complete Testing Charges Rs 7000
6.1(Sulphur %)	-	500	Complete Testing Charges Rs 7000
6.1(Phosphorus %)	-	500	Complete Testing Charges Rs 7000
6.1(Manganese %)	-	500	Complete Testing Charges Rs 7000
6.1( Nitrogen%)	-	1000	Complete Testing Charges Rs 7000
6.1( Ti)	-	500	Complete Testing Charges Rs 7000
6.1(Ni)	-	500	Complete Testing Charges Rs 7000
6.1(V)	-	500	Complete Testing Charges Rs 7000
6.1( Aluminium %)	-	500	Complete Testing Charges Rs 7000
6.1( Copper %)	-	500	Complete Testing Charges Rs 7000
Cl 8(UTM)	-	3000	Complete Testing Charges Rs 7000
Cl 9(Press)	-	800	Complete Testing Charges Rs 7000
Cl 10(Die Press)	-	800	Complete Testing Charges Rs 7000
Cl 12(Workmanship)	-	500	Complete Testing Charges Rs 7000
Cl 13(Length, Width & Thickness)	-	800	Complete Testing Charges Rs 7000
6.1(Silicon %)	-	500	Complete Testing Charges Rs 7000
6.1(Cr)	-	500	Complete Testing Charges Rs 7000
6.1(Mo)	-	500	Complete Testing Charges Rs 7000
6.1(Microalloying)	-	500	Complete Testing Charges Rs 7000

10 Apr, 2028

-
-

IS 15997 (2012)

Low nickel austenitic stainless steel sheet and strip for utensils and kitchen appliances - Specification

7500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 8.1, 8.1.1 & 10.1 Table 1(Carbon -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	Complete Testing Charges Rs 7500
Cl. 8.1, 8.1.1 & 10.1 Table 1(Sulphur -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	Complete Testing Charges Rs 7500
Cl. 8.1, 8.1.1 & 10.1 Table 1(Phosphorus -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	Complete Testing Charges Rs 7500
Cl. 8.1, 8.1.1 & 10.1 Table 1(Manganese -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	Complete Testing Charges Rs 7500
Cl. 8.1, 8.1.1 & 10.1 Table 1(Silicon -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	Complete Testing Charges Rs 7500
Cl. 8.1, 8.1.1 & 10.1 Table 1(Copper -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	Complete Testing Charges Rs 7500
Cl. 8.1, 8.1.1 & 10.1 Table 1(Nitrogen -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	Complete Testing Charges Rs 7500
Cl. 8.1, 8.1.1 & 10.1 Table 1(Chromium -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	Complete Testing Charges Rs 7500
Cl. 8.1, 8.1.1 & 10.1 Table 1(Nickel -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	Complete Testing Charges Rs 7500
9.3(Tensile Test-1608:Part 1)	-	1000	Complete Testing Charges Rs 7500
9.3, Table 3 (Yield Strength, Mpa)	-	1000	Complete Testing Charges Rs 7500
9.3, Table 3 (Elongation, %)	-	1000	Complete Testing Charges Rs 7500
9.4(Erichsen Cupping Test,(Average depth of cupping) mm)	-	800	Complete Testing Charges Rs 7500
11(Surface finish)	-	500	Complete Testing Charges Rs 7500
14.1(Thickness,mm)	-	500	Complete Testing Charges Rs 7500
14.2( Width, mm)	-	500	Complete Testing Charges Rs 7500
14.3(Length, mm)	-	500	Complete Testing Charges Rs 7500
14.4(Flatness, mm)	-	500	Complete Testing Charges Rs 7500
14.5(Camber, mm)	-	500	Complete Testing Charges Rs 7500
9.3, Table 3 (Tensile Strength, Mpa)	-	1000	Complete Testing Charges Rs 7500
6(Freedom From Defects)	-	500	Complete Testing Charges Rs 7500
12(Dimensions)	-	500	Complete Testing Charges Rs 7500

10 Apr, 2028

-
-

IS 7887 (1992)

Mild steel wire rod for general engineering purposes - Specification (First Revision)

4000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 8(Workmanship)	-	500	Complete Testing Charges Rs 4000
Cl 9(Nominal Diameter & Out Of Shape)	-	800	Complete Testing Charges Rs 4000
6.1(Carbon %)	-	500	Complete Testing Charges Rs 4000
6.1(Sulphur %)	-	500	Complete Testing Charges Rs 4000
6.1(Phosphorus %)	-	500	Complete Testing Charges Rs 4000
6.1(Manganese %)	-	500	Complete Testing Charges Rs 4000
6.1(Silicon %)	-	500	Complete Testing Charges Rs 4000
6.1( Aluminium %)	-	500	Complete Testing Charges Rs 4000

10 Apr, 2028

-
-

IS 10748 (2004)

Hot - Rolled steel strip for welded tubes and pipes - Specification (Second Revision)

7500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 8 & Table 3(UTM)	-	2100	Complete Testing Charges Rs 7500
Cl 9(Press)	-	800	Complete Testing Charges Rs 7500
Cl 11(Workmanship)	-	500	Complete Testing Charges Rs 7500
Cl 12 & 13(Length, Width & Thickness)	-	800	Complete Testing Charges Rs 7500
Table 1 ( Clauses 7.1 ,7.2 )( CARBON)	-	500	Complete Testing Charges Rs 7500
Table 1 ( Clauses 7.1 ,7.2 )(SULPHUR)	-	500	Complete Testing Charges Rs 7500
Table 1 ( Clauses 7.1 ,7.2 )(PHOSPHURS)	-	500	Complete Testing Charges Rs 7500
Table 1 ( Clauses 7.1 ,7.2 )(MANGANESE)	-	500	Complete Testing Charges Rs 7500
Table 1 ( Clauses 7.1 ,7.2 )(SILICON)	-	500	Complete Testing Charges Rs 7500
Table 1 ( Clauses 7.1 ,7.2 )(NITROGEN)	-	1000	Complete Testing Charges Rs 7500
Table 1 ( Clauses 7.1 ,7.2 )( ALUMINIUM)	-	500	Complete Testing Charges Rs 7500
Table 1 ( Clauses 7.1 ,7.2 )(Nickel)	-	500	Complete Testing Charges Rs 7500
Table 1 ( Clauses 7.1 ,7.2 )(Chromium)	-	500	Complete Testing Charges Rs 7500
Table 1 ( Clauses 7.1 ,7.2 )(Molybdenum)	-	500	Complete Testing Charges Rs 7500
Table 1 ( Clauses 7.1 ,7.2 )(NIOBIUM)	-	500	Complete Testing Charges Rs 7500
Table 1 ( Clauses 7.1 ,7.2 )(VANADIUM)	-	500	Complete Testing Charges Rs 7500
Table 1 ( Clauses 7.1 ,7.2 )(TITANIUM)	-	500	Complete Testing Charges Rs 7500
Table 1 ( Clauses 7.1 ,7.2 )(CARBON EQUIVELENT )	-	1500	Complete Testing Charges Rs 7500
Cl 8 & Table 3(UTM)	-	2100	Complete Testing Charges Rs 7500
7.1( Copper %)	-	500	Complete Testing Charges Rs 7500

10 Apr, 2028

-
-

IS 5522 (2014)

Stainless steel sheets and strips for utensils - Specification (Third Revision)

8000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 7.1 & 7.2 Table 1(Carbon -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	Complete Testing Charges Rs 8000
Cl. 7.1 & 7.2 Table 1(Silicon -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	Complete Testing Charges Rs 8000
Cl. 7.1 & 7.2 Table 1(Manganese -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	Complete Testing Charges Rs 8000
Cl. 7.1 & 7.2 Table 1(Nickel -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	Complete Testing Charges Rs 8000
Cl. 7.1 & 7.2 Table 1(Chromium -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	Complete Testing Charges Rs 8000
Cl. 7.1 & 7.2 Table 1(Sulphur -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	Complete Testing Charges Rs 8000
Cl. 7.1 & 7.2 Table 1(Phosphorus -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	Complete Testing Charges Rs 8000
Cl. 7.1 & 7.2 Table 1(Nitrogen -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	Complete Testing Charges Rs 8000
8.2, Table 3(Tensile Strength, N/mm2)	-	1000	Complete Testing Charges Rs 8000
8.2, Table 3(Proof Stress, N/mm2)	-	1000	Complete Testing Charges Rs 8000
8.2, Table 3(Elongation, %)	-	1000	Complete Testing Charges Rs 8000
8.3(Hardness , max-IS 1500 or IS 1501 (Part 1) or IS 1586)	-	1000	Complete Testing Charges Rs 8000
8.4(Bend Test)	-	800	Complete Testing Charges Rs 8000
8.5(Erichsen Cupping Test)	-	800	Complete Testing Charges Rs 8000
10.1(Thickness, mm)	-	800	Complete Testing Charges Rs 8000
10.2(width, mm)	-	500	Complete Testing Charges Rs 8000
10.3(Length, mm)	-	500	Complete Testing Charges Rs 8000
10.4(Flatness,mm)	-	500	Complete Testing Charges Rs 8000
10.5(Camber, mm)	-	500	Complete Testing Charges Rs 8000
11(Surface Finish)	-	500	Complete Testing Charges Rs 8000

10 Apr, 2028

-
-

IS 15658 (2006)

Precast concrete blocks for paving - Specification

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1.2(Physical requirement)	-	300	Complete Testing Charges Rs 10000
6.1.3(Physical requirement)	-	300	Complete Testing Charges Rs 10000
6.1.4(Physical requirement)	-	300	Complete Testing Charges Rs 10000
6.2.1 & 7.1(VISUAL INSPECTION)	-	300	Complete Testing Charges Rs 10000
B-1.3.1(MEAN INDIVIDUAL WIDTH (of all eight test specimens), W)	-	300	Complete Testing Charges Rs 10000
B-5(AVERAGE WIDTH (Average for eight test specimens), W)	-	300	Complete Testing Charges Rs 10000
B-1.3.1(MEAN INDIVIDUAL LENGTH (of all eight test specimens), L)	-	300	Complete Testing Charges Rs 10000
B-5(AVERAGE LENGTH (Average for eight test specimens), L)	-	300	Complete Testing Charges Rs 10000
Table 1(MINIMUM PAVER BLOCK THICKNESS)	-	300	Complete Testing Charges Rs 10000
B-1.3.2(MEAN INDIVIDUAL THICKNESS (of all eight test specimens), T)	-	300	Complete Testing Charges Rs 10000
B-5(AVERAGE THICKNESS (Average for eight test specimens), T)	-	300	Complete Testing Charges Rs 10000
B-1.3.3(INDIVIDUAL ASPECT RATIO (L/T) (of all eight test specimens))	-	300	Complete Testing Charges Rs 10000
B-5(AVERAGE ASPECT RATIO (L/T) (for eight test specimens))	-	300	Complete Testing Charges Rs 10000
B-2.3(INDIVIDUAL ARRIS/CHAMFER (of all eight test specimens))	-	300	Complete Testing Charges Rs 10000
B-5(AVERAGE ARRIS/CHAMFER (for eight test specimens))	-	300	Complete Testing Charges Rs 10000
B-5(INDIVIDUAL PLAN AREA, ASP (of all eight test specimens) )	-	300	Complete Testing Charges Rs 10000
B-5(AVERAGE PLAN AREA, ASP (for eight test specimens))	-	300	Complete Testing Charges Rs 10000
B-5(INDIVIDUAL WEARING FACE AREA, Asw (of all eight test specimens))	-	300	Complete Testing Charges Rs 10000
B-5(AVERAGE WEARING FACE AREA, Asw (for eight test specimens))	-	300	Complete Testing Charges Rs 10000
B- 4.3(MEAN INDIVIDUAL SQUARENESS (of all eight test specimens) )	-	300	Complete Testing Charges Rs 10000
B-5(AVERAGE SQUARENESS (for eight test specimens))	-	300	Complete Testing Charges Rs 10000
6.2.3(THICKNESS OF WEARING LAYER, if the sample is Double Layered (for eight test specimens))	-	300	Complete Testing Charges Rs 10000
6.2.4(WATER ABSORPTION TEST (Average for three test specimens))	-	1000	Complete Testing Charges Rs 10000
6.2.5(AVERAGE COMPRESSIVE STRENGTH (Average for eight test specimens) )	-	1000	Complete Testing Charges Rs 10000
6.2.6(ABRASION RESISTANCE, Dry Condition (For all eight test specimens))	-	1000	Complete Testing Charges Rs 10000
6.2.5.1(INDIVIDUAL COMPRESSIVE STRENGTH (Individual strength of eight test specimen))	-	1000	Complete Testing Charges Rs 10000
6.2.7(INDIVIDUAL TENSILE SPLITTING STRENGTH (Individual strength of eight test specimen ))	-	1000	Complete Testing Charges Rs 10000
6.2.7(AVERAGE TENSILE SPLITTING STRENGTH (for eight test specimen ))	-	1000	Complete Testing Charges Rs 10000
6.2.8(INDIVIDUAL FLEXURAL STRENGTH (Individual strength of eight test specimen ))	-	1000	Complete Testing Charges Rs 10000
6.2.8(AVERAGE FLEXURAL STRENGTH (Average strength of eight test specimen ))	-	1000	Complete Testing Charges Rs 10000
Annex-G-7(INDIVIDUAL BREAKING LOAD (Individual Load of eight test specimen ))	-	1000	Complete Testing Charges Rs 10000
Annex-G-7(AVERAGE BREAKING LOAD)	-	1000	Complete Testing Charges Rs 10000

10 Apr, 2028

-
-

IS 1239 : Part 1 (2004)

Steel tubes, tubulars and other wrought steel fittings - Specification: Part 1 steel tubes (Sixth Revision)

6000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 8(Outer Diameter, Thickness & Mass)	-	1800	Complete Testing Charges Rs 6000
Cl 14(Tensile Test, Flattening Test & Bend Test)	-	4600	Complete Testing Charges Rs 6000
Cl 15(Workmanship)	-	500	Complete Testing Charges Rs 6000
Cl 12(Workmanship)	-	500	Complete Testing Charges Rs 6000

10 Apr, 2028

-
-

IS 13801 (2013)

Chequered Cement Concrete Tiles -

5000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7 -Table 2- i(Fineness 4031 Part 2)	-	500	Complete Testing Charges Rs 5000
7 -Table 2- ii- a(Expansion by Le Chatelier- 4031 Part 3)	-	300	Complete Testing Charges Rs 5000
7 -Table 2- ii- a(Expansion after aeration - 4031 Part 3)	-	300	Complete Testing Charges Rs 5000
7 -Table 2- ii- b(Expansion by Autoclave- 4031 Part 3)	-	600	Complete Testing Charges Rs 5000
7 -Table 2- iii- a(Setting Time Initial- 4031 Part 5)	-	500	Complete Testing Charges Rs 5000
7 -Table 2-iii- b(Setting Time Final- 4031 Part 5)	-	600	Complete Testing Charges Rs 5000
7 -Table 2- iv- a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	600	Complete Testing Charges Rs 5000
7 -Table 2- iv- b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	700	Complete Testing Charges Rs 5000
7 -Table 2- iv- c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	1000	Complete Testing Charges Rs 5000
7 -Table 2- vi(Drying Shrinkage- IS 4031 Part 10)	-	1000	Complete Testing Charges Rs 5000
6 - Table - 1 vi( Alkali content as (Na2O + 0.658 K2O) - Cl 4.11 of IS 4032:1985)	-	300	Complete Testing Charges Rs 5000
6 - Table - 1 v(Chloride content - Cl 4.13 of IS 4032:1985)	-	300	Complete Testing Charges Rs 5000
6 - Table - 1 iv(Loss on ignition - Cl 7.1 of IS 4032:1985)	-	300	Complete Testing Charges Rs 5000
6 - Table - 1 iii(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 7.3 of IS 4032:1985)	-	300	Complete Testing Charges Rs 5000
6 - Table - 1 ii(Magnesia - Cl 7.2 of IS 4032:1985)	-	300	Complete Testing Charges Rs 5000
6 - Table - 1 i(Insoluble residue - Cl 7.4 of IS 4032:1985)	-	300	Complete Testing Charges Rs 5000
(Cl 7, 8 &9)(Length, Breadth, Thickness, Difference in length of side between the longest side and shorterst side in the sample shall not exceed 1 mm, Half tiles, Difference in Thickness between the thickest and thinnest tile in the sample shall not exceed 10 percent of minimum thickness, Depth of chequred groove, Thickness of wearing layer.)	-	900	Complete Testing Charges Rs 5000
Cl 12.1(Concavity & Convexity )	-	350	Complete Testing Charges Rs 5000
Cl 12.2(Longest gap between the arms of the square and the edge of the title shall not exceed 2 percent of the length.)	-	350	Complete Testing Charges Rs 5000
Cl 12.3(Shall not exceed 1 percent of the length of the edge.)	-	350	Complete Testing Charges Rs 5000
Cl 12.4(Water absorption)	-	500	Complete Testing Charges Rs 5000
Cl 12.5(Wet transverse strength)	-	1000	Complete Testing Charges Rs 5000
Cl 12.6(Resistance to wear)	-	1000	Complete Testing Charges Rs 5000
Cl 11(Finish)	-	100	Complete Testing Charges Rs 5000
Annex G3.1(Aluminium oxide content)	-	300	Complete Testing Charges Rs 5000

10 Apr, 2028

-
-

IS 4270 (2001)

Steel tubes used for water wells specification (Third Revision)

8000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 6(Tensile Test & Flattening Test)	-	3500	Complete Testing Charges Rs 8000
Cl 7(Outer Diameter, Thickness, Mass & Straightness)	-	1500	Complete Testing Charges Rs 8000
Cl 9(Pipe ends, Angle of bevel & Root Face )	-	800	Complete Testing Charges Rs 8000
Cl 10(Outer Diameter & Overall Length)	-	800	Complete Testing Charges Rs 8000
Cl 12(Bituminous Coating & Galvanizing )	-	1500	Complete Testing Charges Rs 8000
Cl 14(Workmanship)	-	500	Complete Testing Charges Rs 8000
5.2(phosphorus)	-	500	Complete Testing Charges Rs 8000
5.2(sulphur)	-	500	Complete Testing Charges Rs 8000

10 Apr, 2028

-
-

IS 4923 (2017)

Hollow steel sections for structural use - Specification (Third Revision)

All

8000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Depth))	-	200	Complete Testing Charges Rs 8000
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Width))	-	200	Complete Testing Charges Rs 8000
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections(Thickness))	-	200	Complete Testing Charges Rs 8000
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Weigth))	-	200	Complete Testing Charges Rs 8000
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Area of Section))	-	200	Complete Testing Charges Rs 8000
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Moment of Inertia))	-	200	Complete Testing Charges Rs 8000
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Moment of Inertia about X-X))	-	200	Complete Testing Charges Rs 8000
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Moment of Inertia about Y-Y))	-	200	Complete Testing Charges Rs 8000
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Radius of Gyration))	-	200	Complete Testing Charges Rs 8000
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Radius of Gyration about X-X))	-	200	Complete Testing Charges Rs 8000
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections(Radius of Gyration about Y-Y))	-	200	Complete Testing Charges Rs 8000
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections(Elastic Modulus))	-	200	Complete Testing Charges Rs 8000
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Elastic Modulus about X-X))	-	200	Complete Testing Charges Rs 8000
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Elastic Modulus about Y-Y))	-	200	Complete Testing Charges Rs 8000
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Plastic Modulus))	-	200	Complete Testing Charges Rs 8000
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Plastic Modulus about X-X))	-	200	Complete Testing Charges Rs 8000
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections(Plastic Modulus about Y-Y))	-	200	Complete Testing Charges Rs 8000
Cl. 10.1, 14.1, 18.1(Straightness)	-	500	Complete Testing Charges Rs 8000
Cl. 10.2, Fig 1(Outside dimension (B))	-	200	Complete Testing Charges Rs 8000
Cl. 10.2, Fig 1(Outside dimension (H))	-	200	Complete Testing Charges Rs 8000
Cl. 10.2, Fig 1(Outside dimension (T))	-	200	Complete Testing Charges Rs 8000
Cl. 10.4, Fig 2(Concavity, X1)	-	200	Complete Testing Charges Rs 8000
Cl. 10.4, Fig 2(Convexity, X2)	-	200	Complete Testing Charges Rs 8000
Cl. 10.5, Fig 3(Squareness of side)	-	200	Complete Testing Charges Rs 8000
Cl. 10.6, Fig 4(External Corner Radius)	-	200	Complete Testing Charges Rs 8000
Cl. 10.7, Fig 5(Total twist, V)	-	200	Complete Testing Charges Rs 8000
Cl. 15.2, Table 3(Tensile Strength- IS 1608)	-	1000	Complete Testing Charges Rs 8000
Cl. 15.2, Table 3(Yield Strength- IS 1608)	-	1000	Complete Testing Charges Rs 8000
Cl. 15.2, Table 3(Elongation- IS 1608)	-	1000	Complete Testing Charges Rs 8000
Cl.7.1(Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	Complete Testing Charges Rs 8000
Cl.7.1(Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	Complete Testing Charges Rs 8000
Cl.7.1(Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	Complete Testing Charges Rs 8000
Cl.7.1(Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	Complete Testing Charges Rs 8000
Cl.7.1(Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	Complete Testing Charges Rs 8000
Cl.7.1(Aluminium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	Complete Testing Charges Rs 8000
Cl.7.1(Copper- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	Complete Testing Charges Rs 8000
Cl.7.1(Niobium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	Complete Testing Charges Rs 8000
Cl.7.1(Vanadium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	Complete Testing Charges Rs 8000
Cl.7.1(Titanium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	Complete Testing Charges Rs 8000
Cl.7.1(Nitrogen- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	Complete Testing Charges Rs 8000
Cl.7.1(Carbon Equivalent-IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1500	Complete Testing Charges Rs 8000

10 Apr, 2028

-
-

IS 1237 (2012)

Cement Concrete Flooring Tiles - Specification

4000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 12.5(Water absorption)	-	500	Complete Testing Charges Rs 4000
Cl 7.1(Length, Breadth, Minimum thickness, Difference in length of side between the longest side and shorterst side, Half tiles, Difference in Thickness between the thickest and thinnest tile, Thickness of wearing layer)	-	600	Complete Testing Charges Rs 4000
Cl 12.2(Concavity & Convexity )	-	350	Complete Testing Charges Rs 4000
Cl 12.3(The Maximum gap between the arms of the square and the edge of the title shall notexceed 2 percent of the length.)	-	350	Complete Testing Charges Rs 4000
Cl 12.4(Shall not exceed 1 percent of the length of the edge.)	-	350	Complete Testing Charges Rs 4000
Cl 12.6(Wet transverse strength )	-	1000	Complete Testing Charges Rs 4000
Cl 12.7(Resistance to wear)	-	1000	Complete Testing Charges Rs 4000
Cl 11(Suface Finish)	-	300	Complete Testing Charges Rs 4000

10 Apr, 2028

-
-

IS 456 (2000)

Plain and reinforced concrete - Code of practice (Fourth Revision)

Construction Water

2500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 5.4 (a)(Acidity)	-	400	Complete Testing Charges Rs 2500
Cl 5.4 (b)(Alkalinity)	-	400	Complete Testing Charges Rs 2500
Cl 5.4 .2(pH)	-	500	Complete Testing Charges Rs 2500
Cl 5.4 Table 1 (i)(Organic Solids)	-	500	Complete Testing Charges Rs 2500
Cl 5.4 Table 1 (ii)(Inorganic Solids)	-	500	Complete Testing Charges Rs 2500
Cl 5.4 Table 1 (iii)(Sulphate)	-	500	Complete Testing Charges Rs 2500
Cl 5.4 Table 1 (iv)(Chloride)	-	500	Complete Testing Charges Rs 2500
5.4-Table-1 (v)-IS: 3025(P-17)(Suspended matter)	-	500	Complete Testing Charges Rs 2500
5.4-(a)-IS: 3025 (P-22)(Volume of 0.02 N NaOH to neutralized 100 ml of water using phenolphthalein indicator)	-	400	Complete Testing Charges Rs 2500
5.4-(b)-IS: 3025 (P-23)(Volume of 0.02 N H2SO4 to neutralized 100 ml of water using mixed indicator)	-	400	Complete Testing Charges Rs 2500
5.4.2-IS: 3025(P-11)(Ph)	-	500	Complete Testing Charges Rs 2500
5.4-Table-1 (i)-IS: 3025(P-18)(Organic )	-	500	Complete Testing Charges Rs 2500
5.4-Table-1 (i)-IS: 3025(P-18)(In-Organic)	-	500	Complete Testing Charges Rs 2500
Cl 5.4 Table 1 (v)(Suspended Matter)	-	500	Complete Testing Charges Rs 2500

10 Apr, 2028

-
-

IS 14756 (2024)

Stainless Steel Utensils - Specification (THIRD REVISION)

13000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 3.1(Material used for manufacturing utensils)	-	13000	-
Cl 3.2(Material used for composite bottom)	-	13000	-
Cl 3.3(Material used for body of utensil of 3-ply construction)	-	13000	-
Cl 3.4(Material used for stainless steel lid)	-	13000	-
Cl 3.5(Material used for tempered glass lid)	-	13000	-
Cl 3.5(Material used for stainless steel rim)	-	13000	-
Cl 4.2 & Table 1(Minimum Sheet Thickness for Body of Utensil)	-	13000	-
Cl 4.2 & Table 2(Minimum Sheet Thickness for Lid of Utensil)	-	13000	-
Cl 4.2(Thickness of the finished utensil)	-	13000	-
Cl 4.3(Classification)	-	13000	-
Cl 4.4 (i)(Thickness of Aluminium disc/core)	-	13000	-
Cl 4.4 (ii)(Thickness of Protector/cowl)	-	13000	-
Cl 4.5(Minimum sheet thickness (3-ply utensil))	-	13000	-
Cl 4.5(Thickness of finished utensil (3-ply utensil))	-	13000	-
Cl 5.1(Manufacturing defect & visual appearance)	-	13000	-
CL 5.2(Accessibility for cleaning)	-	13000	-
Cl 5.3(Joining of handles to the utensils)	-	13000	-
Cl 5.4(Requirement for handles)	-	13000	-
Cl 5.5(Welding (Finish))	-	13000	-
Cl 5.6(Finish of 3-ply utensil)	-	13000	-
Cl 5.7(Requirement for coating)	-	13000	-
Cl 5.8(Coating thickness test)	-	13000	-
Cl 5.8(Coating adhesion test)	-	13000	-
Cl 5.8.1(Thermal shock test (Coating))	-	13000	-
Cl 6.1(Staining Test (Type Test - Frequency Once in a Year))	-	13000	-
Cl 6.2(Mechanical Shock Test (for Cladded Utensils Only))	-	13000	-
Cl 6.3(Thermal Shock Test (for Cladded Utensils Only))	-	13000	-
Cl 6.4(Dry Heat Test (for Cladded Utensils Only))	-	13000	-
Cl 6.5(Coating Thickness Test (for Copper Deposit))	-	13000	-
Cl 6.6(Thermal shock test (3-ply construction utensil body))	-	13000	-
Cl 6.7(Nominal Capacity Test)	-	13000	-
Cl 8(Marking)	-	13000	-
3.1(a) Carbon)	-	13000	-
3.1(b) Silicon)	-	13000	-
3.1(c)Manganese)	-	13000	-
3.1(d) Nickel)	-	13000	-
3.1(Chromium)	-	13000	-
3.1(Sulphu)	-	13000	-
3.1(Phosphorus)	-	13000	-
Stainless Steel Utensils - Specification (THIRD REVISION)(Copper)	-	13000	-
3.1(Nitrogen)	-	13000	-
3.2 a(a) Carbon)	-	13000	-
3.2 a(b) Silicon)	-	13000	-
68995(Manganese)	-	13000	-
3.2 a(d) Nickel)	-	13000	-
3.2 a(Chromium)	-	13000	-
3.2 a(Sulphur)	-	13000	-
3.2 a(g) Phosphorus)	-	13000	-
3.2 a(h) Copper)	-	13000	-
3.2 a(Nitrogen)	-	13000	-
3.2 b(a) Aluminium)	-	13000	-
3.2 b(b) Copper)	-	13000	-
3.2 b(c) Magnesium)	-	13000	-
3.2 b(d) Silicon)	-	13000	-
3.2 b(e) Iron)	-	13000	-
3.2 b(f) Manganese)	-	13000	-
3.2 b(d) Silicon)	-	13000	-
3.2 b(e) Iron)	-	13000	-
3.2 b(f) Manganese)	-	13000	-
3.2 b(g) Zinc)	-	13000	-
3.2 b(h) Titanium)	-	13000	-
3.2 b(i) Chromium)	-	13000	-
3.2 b(j) Cu+Si+Fe+Mn+Zn+mg)	-	13000	-
3.2 b(k) Lead)	-	13000	-
3.2 c(a) Carbon)	-	13000	-
3.2 c(b) Silicon)	-	13000	-
3.2 c(c) Manganese)	-	13000	-
3.2 c(d) Nickel)	-	13000	-
3.2 c(e) Chromium)	-	13000	-
3.2 c(f) Sulphur)	-	13000	-
3.2 c(g) Phosphorus)	-	13000	-
3.3(a) Inner layer)	-	13000	-
3.3(b) Middlelayer)	-	13000	-
3.3(c) Outerlayer)	-	13000	-
3.4(a) Carbon)	-	13000	-
3.4(b) Silicon)	-	13000	-
3.4(c) Manganese)	-	13000	-
3.4(d) Nickel)	-	13000	-
3.4(e) Chromium)	-	13000	-
3.4(f) Sulphur)	-	13000	-
3.4(g) Phosphorus)	-	13000	-
3.4(h) Copper)	-	13000	-
3.4(i) Nitrogen)	-	13000	-
3.4(Thickness stainless steel lid)	-	13000	-
3.5(If the utensils provided with tempered glass lid)	-	13000	-
4.1(Shapes and Dimensions)	-	13000	-
4.2(Thickness of the sheet)	-	13000	-
4.3(Classifications)	-	13000	-
4.3(Core Thickness for 3-ply Construction (asper IS15960))	-	13000	-
4.3(Thickness of protective layer (as per IS 15960))	-	13000	-
4.4(Thickness of 3ply full body utensil)	-	13000	-
5(Workmanship and finish)	-	13000	-
5.4(Handles)	-	13000	-
4.1 of IS 13395(Construction)	-	13000	-
4.2 of IS 13395(Materials)	-	13000	-
4.3 of IS 13395(Selection and Size)	-	13000	-
4.4 of Is 13395(Position of Handle and Knob with Respect to Cookware)	-	13000	-
4.5 of IS 13395(Attachment to Cookware)	-	13000	-
5.2 of IS 13395(Bending Strength)	-	13000	-
5.3 of IS 13395(Torque Strength)	-	13000	-
5.4 of IS 13395(Impact Strength)	-	13000	-
5.5 of IS 13395(Fatigue Resistance 15 000 cycles withstand)	-	13000	-
5.6 of IS 13395(Leakage)	-	13000	-
5.7 of IS 13395(Thermal Insulation)	-	13000	-
5.8 of IS 13395(Heat Resistance)	-	13000	-
5.9 of IS 13395(Washing Resistance)	-	13000	-
5.10 of IS 13395(Burning Resistance)	-	13000	-
5.5(Material comes in contact with food)	-	13000	-
6.1(Staining Test)	-	13000	-
6.2(Mechanical Shock Test)	-	13000	-
6.3(Thermal Shock Test)	-	13000	-
6.4(Dry Heat Test)	-	13000	-
6.6(Heat test)	-	13000	-
6.7.1(Nominal Capacity Test)	-	13000	-
6.7.2(Internal diameter of utensil)	-	13000	-
Cl 3.1(Material used for manufacturing utensils)	-	-	-
Cl 3.2(Material used for composite bottom)	-	-	-
Cl 3.3(Material used for body of utensil of 3-ply construction)	-	-	-
Cl 3.4(Material used for stainless steel lid)	-	-	-
Cl 3.5(Material used for tempered glass lid)	-	-	-
Cl 3.5(Material used for stainless steel rim)	-	-	-
Cl 4.2 & Table 1(Minimum Sheet Thickness for Body of Utensil)	-	-	-
Cl 4.2 & Table 2(Minimum Sheet Thickness for Lid of Utensil)	-	-	-
Cl 4.2(Thickness of the finished utensil)	-	-	-
Cl 4.3(Classification)	-	-	-
Cl 4.4 (i)(Thickness of Aluminium disc/core)	-	-	-
Cl 4.4 (ii)(Thickness of Protector/cowl)	-	-	-
Cl 4.5(Minimum sheet thickness (3-ply utensil))	-	-	-
Cl 4.5(Thickness of finished utensil (3-ply utensil))	-	-	-
Cl 5.1(Manufacturing defect & visual appearance)	-	-	-
CL 5.2(Accessibility for cleaning)	-	-	-
Cl 5.3(Joining of handles to the utensils)	-	-	-
Cl 5.4(Requirement for handles)	-	-	-
Cl 5.5(Welding (Finish))	-	-	-
Cl 5.6(Finish of 3-ply utensil)	-	-	-
Cl 5.7(Requirement for coating)	-	-	-
Cl 5.8(Coating thickness test)	-	-	-
Cl 5.8(Coating adhesion test)	-	-	-
Cl 5.8.1(Thermal shock test (Coating))	-	-	-
Cl 6.1(Staining Test (Type Test - Frequency Once in a Year))	-	-	-
Cl 6.2(Mechanical Shock Test (for Cladded Utensils Only))	-	-	-
Cl 6.3(Thermal Shock Test (for Cladded Utensils Only))	-	-	-
Cl 6.4(Dry Heat Test (for Cladded Utensils Only))	-	-	-
Cl 6.5(Coating Thickness Test (for Copper Deposit))	-	-	-
Cl 6.6(Thermal shock test (3-ply construction utensil body))	-	-	-
Cl 6.7(Nominal Capacity Test)	-	-	-
Cl 8(Marking)	-	-	-
3.1(a) Carbon)	-	-	-
3.1(b) Silicon)	-	-	-
3.1(c)Manganese)	-	-	-
3.1(d) Nickel)	-	-	-
3.1(Chromium)	-	-	-
3.1(Sulphu)	-	-	-
3.1(Phosphorus)	-	-	-
Stainless Steel Utensils - Specification (THIRD REVISION)(Copper)	-	-	-
3.1(Nitrogen)	-	-	-
3.2 a(a) Carbon)	-	-	-
3.2 a(b) Silicon)	-	-	-
68995(Manganese)	-	-	-
3.2 a(d) Nickel)	-	-	-
3.2 a(Chromium)	-	-	-
3.2 a(Sulphur)	-	-	-
3.2 a(g) Phosphorus)	-	-	-
3.2 a(h) Copper)	-	-	-
3.2 a(Nitrogen)	-	-	-
3.2 b(a) Aluminium)	-	-	-
3.2 b(b) Copper)	-	-	-
3.2 b(c) Magnesium)	-	-	-
3.2 b(d) Silicon)	-	-	-
3.2 b(e) Iron)	-	-	-
3.2 b(f) Manganese)	-	-	-
3.2 b(d) Silicon)	-	-	-
3.2 b(e) Iron)	-	-	-
3.2 b(f) Manganese)	-	-	-
3.2 b(g) Zinc)	-	-	-
3.2 b(h) Titanium)	-	-	-
3.2 b(i) Chromium)	-	-	-
3.2 b(j) Cu+Si+Fe+Mn+Zn+mg)	-	-	-
3.2 b(k) Lead)	-	-	-
3.2 c(a) Carbon)	-	-	-
3.2 c(b) Silicon)	-	-	-
3.2 c(c) Manganese)	-	-	-
3.2 c(d) Nickel)	-	-	-
3.2 c(e) Chromium)	-	-	-
3.2 c(f) Sulphur)	-	-	-
3.2 c(g) Phosphorus)	-	-	-
3.3(a) Inner layer)	-	-	-
3.3(b) Middlelayer)	-	-	-
3.3(c) Outerlayer)	-	-	-
3.4(a) Carbon)	-	-	-
3.4(b) Silicon)	-	-	-
3.4(c) Manganese)	-	-	-
3.4(d) Nickel)	-	-	-
3.4(e) Chromium)	-	-	-
3.4(f) Sulphur)	-	-	-
3.4(g) Phosphorus)	-	-	-
3.4(h) Copper)	-	-	-
3.4(i) Nitrogen)	-	-	-
3.4(Thickness stainless steel lid)	-	-	-
3.5(If the utensils provided with tempered glass lid)	-	-	-
4.1(Shapes and Dimensions)	-	-	-
4.2(Thickness of the sheet)	-	-	-
4.3(Classifications)	-	-	-
4.3(Core Thickness for 3-ply Construction (asper IS15960))	-	-	-
4.3(Thickness of protective layer (as per IS 15960))	-	-	-
4.4(Thickness of 3ply full body utensil)	-	-	-
5(Workmanship and finish)	-	-	-
5.4(Handles)	-	-	-
4.1 of IS 13395(Construction)	-	-	-
4.2 of IS 13395(Materials)	-	-	-
4.3 of IS 13395(Selection and Size)	-	-	-
4.4 of Is 13395(Position of Handle and Knob with Respect to Cookware)	-	-	-
4.5 of IS 13395(Attachment to Cookware)	-	-	-
5.2 of IS 13395(Bending Strength)	-	-	-
5.3 of IS 13395(Torque Strength)	-	-	-
5.4 of IS 13395(Impact Strength)	-	-	-
5.5 of IS 13395(Fatigue Resistance 15 000 cycles withstand)	-	-	-
5.6 of IS 13395(Leakage)	-	-	-
5.7 of IS 13395(Thermal Insulation)	-	-	-
5.8 of IS 13395(Heat Resistance)	-	-	-
5.9 of IS 13395(Washing Resistance)	-	-	-
5.10 of IS 13395(Burning Resistance)	-	-	-
5.5(Material comes in contact with food)	-	-	-
6.1(Staining Test)	-	-	-
6.2(Mechanical Shock Test)	-	-	-
6.3(Thermal Shock Test)	-	-	-
6.4(Dry Heat Test)	-	-	-
6.6(Heat test)	-	-	-
6.7.1(Nominal Capacity Test)	-	-	-
6.7.2(Internal diameter of utensil)	-	-	-

10 Apr, 2028

-
Included w.e.f 05.05.2025 Excluding Clause 3.5 (annex-c)

Bureau of Indian Standards

The National Standards Body of India

Standard Testing Laboratory Private Limited

PLOT NO.782,KANJHAWALA INDUSTRIAL AREA,NEW DELHI,NORTH WEST, Delhi, North West, Delhi, 110081

9310136320 standardtestinglaboratory@yahoo.com

Scope List