SUNREN TELECOM LABORATORY

C-475, MIDC Pavane, Navi Mumbai, Navi Mumbai, Thane, Maharashtra, 400705
9820305342 sunil@sunren.net
Scope List
Reset
3 Results
S.No. Indian Standard No. Product Grade / Type / Size / Designation etc. Testing Charges (Excl. Of Taxes) Validity Date Remark
1 IS/IEC 62368 : Part 1 (2023) Audio Video Information and Communication Technology Equipment - Part 1: Safety Requirements (Second Revision) - 120000 View breakup
-
15 Mar, 2027 -
Included w.e.f 30.10.2026 Annex C-1 (Protection of materials in equipment from UV radiation) Annex C-2 (UV light conditioning test) Annex D-2 (Antenna interface test generator) Annex D-3 (Electronic pulse generator) Annex G-1 (Switches) Annex G-10 (Resistors) Annex G-11 (Capacitors and RC units) Annex G-12 (Optocouplers) Annex G-13 (Printed boards) Annex G-14 (Coatings on component terminals) Annex G-15 (Pressurized liquid filled components or LFC assemblies) Annex G-16 (IC that includes a capacitor discharge function (ICX)) Annex G-2 (Relays) Annex G-3 (Protective devices) Annex G-4 (Connectors) Annex G-5 (Wound components) Annex G-6 (Wire insulation) Annex G-8 (Varistors) Annex G-9 (Integrated circuit (IC) current limiters) Annex J-1 (General-Insulated winding wires for use without interleaved insulation) Annex J-2 (Type tests) Annex J-3 (Testing during manufacturing) Annex K-1 (General- Safety interlocks) Annex K-2 (Components of the safety interlock safeguard mechanism) Annex K-3 (Inadvertent change of operating mode) Annex K-4 (Interlock safeguard override) Annex K-5 (Fail-safe) Annex K-6 (Mechanically operated safety interlocks) Annex K-7 (Interlock circuit isolation) Annex M-5 (Risk of burn due to short-circuit during carrying) Annex M-6 (Safeguards against short-circuits) Annex M-7 (Risk of explosion from lead acid and NiCd batteries) Annex M-8 ("Protection against internal ignition from external spark sources of rechargeable batteries with aqueous electrolyte") Annex P-3 (Safeguards against spillage of internal liquids) Annex R (Limited short-circuit test) Annex S-2 (Flammability test for fire enclosure and fire barrier integrity) Annex S-3 (Flammability tests for the bottom of a fire enclosure) Annex S-4 (Flammability classification of materials) Annex S-5 (Flammability test for fire enclosure materials of equipment with a steady state power exceeding 4 000 W) Annex S-6 (Grille covering material, cloth, and reticulated foam) Annex U ("Mechanical strength of CRTs and protection against the effects of implosion") Annex Y-1 (General- Construction requirements for outdoor enclosures) Annex Y-2 (Resistance to UV radiation) Annex Y-3 (Resistance to corrosion) Annex Y-4 (Gaskets) Annex Y-5 (Protection of equipment within an outdoor enclosure) Annex Y-6 (Mechanical strength of enclosures) Cl-10.1 (General-Radiation) Cl-10.2 (Radiation energy source classifications) Cl-10.3 (Safeguards against laser radiation) Cl-10.4 ("Safeguards against optical radiation from lamps and lamp systems (including LED types)") Cl-10.5 (Safeguards against X-radiation) Cl-10.6 (Safeguards against acoustic energy sources) Cl-7.1 (General- Injury caused by hazardous substances) Cl-7.2 (Reduction of exposure to hazardous substances) Cl-7.3 (Ozone exposure) Cl-7.4 (Use of personal safeguards or personal protective equipment (PPE) Cl-7.5 (Use of instructional safeguards and instructions)
2 IS 616 (2017) Audio, video and similar electronic apparatus - Safety requirements (Fifth Revision) - 75000 View breakup
-
15 Mar, 2027 -
Included w.e.f 30.10.2026 6.3 10 (Insulation requirements) 12 (Mechanical strength) 14 (Components) 16 (External flexible cords) 16.3b (Cord Bending Test) 18 (Mechanical strength of Picture tubes and protection against the effect of implosion) 18 (Mechanical strength of picture tubes and protection against the effects of implosion) 20 (Resistance to fire) 20.2.4 (Printed Boards) 6 (Hazardous radiations) 6.1 (Ionizing radiation) 6.2 (Laser Radiation) Cl.10.2 a) of Cl.10 (Surge Test) Cl.10.2 b) (i) of Cl.10 (Surge Test) Cl.10.2 b) (ii) of Cl.10 (Surge Test) Cl.10.2 b) (iii) of Cl.10 (Surge Test) Cl.10.2 b) of Cl.10 (Surge Test) Cl.10.2 of Cl.10 (Surge Test) Cl.12.1.1 of Cl.12.1 (Requirements) Cl.12.1.2 of Cl.12.1 (Bump test ) Cl.12.1.3 of Cl.12.1 (Vibration test) Cl.16.1 a) of Cl.16 (Mains supply flexible cords shall be sheathed type, complying with IEC 60227 for PVC cords or as per IEC 60245 for synthetic rubber cords) Cl.16.1 b) of Cl.16 (Non-detachable cords for Class I have green/yellow core for protective earth) Cl.16.2 of Cl.16 (Mains cords conductors shall have a nominal cross-sectional area not less than the values given in Table 18, for rated current consumption of the apparatus) Cl.16.3 a) of Cl.16 (Flexiblecordsnotcomplyingwith16.1, used for interconnections between separate units of equipment used in combination and carrying hazardous live voltages, have adequate dielectric strength as perCl.10.3) Cl.16.4 of Cl.16 (Flexible cords used for connection between equipment have adequate cross-sectional areas to avoid temperature rise under normal and fault conditions) Cl.16.5 a) of Cl.16 (Adequate strain relief on external flexible cords) Cl.16.5 b) of Cl.16 (Not possible to push cord back into equipment) Cl.16.5 c) of Cl.16 (Strain relief device unlikely to damage flexible cord) Cl.16.5 d) of Cl.16 (For mains cords of Class I equipment, hazardous live conductors become taut before earth conductor) Cl.16.6 of Cl.16 (Apertures for external flexible cord: no risk of damage to the cord during assembly or movement in use) Cl.16.7 a) of Cl.16 (Transportable apparatus fitted with detachable cord sets with appliance inlet as perIEC60320-1 or) Cl.16.7 b) of Cl.16 (Transportable apparatus shall have a means of stowage to protect the cord) Cl.20.1 of Cl.20 (Requirements) Cl.20.2 of Cl.20 (Electrical components and mechanical parts) Cl.20.2.1 a) of Cl.20.2 (Exemption for components contained in an enclosure of material V-0 to IEC60695- 11-10 with openings not exceeding 1 mm in width) Cl.20.2.1 b) of Cl.20.2 (Exemption for small components) Cl.20.2.2 of Cl.20.2 (Electrical components ) Cl.20.2.3 of Cl.20.2 (Internal wiring) Cl.20.2.4 i) of Cl.20.2 (Printed boards) Cl.20.2.4 of Cl.20.2 (Printed boards) Cl.20.2.5 i) of Cl.20.2 (Components and parts not covered by 20.2.2, 20.2.3 and 20.2.4) Cl.20.2.5 ii) of Cl.20.2 (Components and parts not covered by 20.2.2, 20.2.3 and 20.2.4) Cl.20.2.5 of Cl.20.2 (Components and parts not covered by 20.2.2, 20.2.3 and 20.2.4) Cl.20.3 of Cl.20 (Fire enclosure*) Cl.20.3.1 of Cl.20.3 (Fire enclosure*) Cl.20.3.2 of Cl.20.3 (Fire enclosure*) Cl.20.3.3 of Cl.20.3 (Fire enclosure*) Cl.8.11 ii) of Cl.8 (Vibration test carried out)
3 IS 13252 : Part 1 (2010) Information technology equipment - Safety: Part 1 general requirements (Second Revision) All Type and All Size 137000 View breakup
Laptop /Notebook/Tablet VDU / Monitors / Printers / Scanner A3+/ Copying Machine-Rs. 95000 Plotter / Copying Machine Large -Rs.145000/- Scanner A4 / PoS: Wireless Keyboard / STB/ Power Bank/ Power Adapter / Mobile Phone/ Cash Register / Passport Reader / Smart Card Reader / CCTV Camera / Recorder / Barcode/Iris/ Fingerprint /Scanner / Smart Watch- Rs. 50000/- ADPM- Rs. 135000/- Standalone switch mode power supplies (smps) with output voltage 48 v ( max) ; USB type external solidstate storage devices (above 256 gb capacity ) ; USB type external hard disk drive ; Keyboard- Rs. 35000/- Automatic teller cash dispensing machines- Rs.195000/-
15 Mar, 2027 -
Components (Cl. 1.5), Moving Parts (Cl. 2.8.5), Switches and relays (Cl. 2.8.7), Semiconductor devices (Cl.2.10.5.4), Non Separable Thin Sheet Material (Cl.2.10.5.8), Insulation in wound components (Cl.2.10.5.11), Wire in wound components (Cl.2.10.5.12)), Wire with solvent-based enamel in wound components (Cl. 2.10.5.13), Additional Insulation in wound components (Cl. 2.10.5.14), Components external terminations (Cl.2.10.7), Tests on coated printed boards and coated components (Cl.2.10.8), Thermal Cycling (Cl. 2.10.9), Test for Pollution Degree 1 environment and for insulating compound (Cl.2.10.10), Tests for semiconductor devices and for cemented joints (Cl.2.10.11), Enclosed and sealed parts (Cl.2.10.12), Power Supply Cords (Cl.3.2.5), Cathode Ray Tubes (Cl.4.2.8), High Pressure Lamps (Cl.4.2.9), Dust, Powders, liquids and gases (Cl.4.3.10), Containers for liquids and gases (Cl.4.3.11), Flammable liquids (Cl.4.3.12), Radiation (Cl.4.3.13), Resistance to fire (Cl.4.7), Evaluation of Integrated Circuit (IC) Current Limiters (Annex CC), Wedge probe Test (Annex EE) for House hold and Home/office document/media shredders

Designed, Developed and Maintained by:

Arohatech IT Services (P) Ltd.

Contact for any query/support: supportlims@bis.gov.in