BIS - LIMS (Laboratory Information Management System)

AC TEST LAB, COTERD SOLUTIONS (OPC) PRIVATE LIMITED

BLOCK ECOTECH VI PLOT NO. 62, SECTOR ECOTECH VI, GREATER NOIDA, Gautam Buddha Nagar, Uttar Pradesh, 201310

9561266784 anuj@coterd.com

Scope List

Reset

3 Results

S.No.

Indian Standard No.

Product

Exclusion

Testing Charges (Excl. Of Taxes)

Facility Type

Effective Date

Validity Date

Remark

IS 8148 (2018)

Ducted and package air - Conditioners - Specification (Second Revision)

685000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2 &4.5(Salt Spray Test)	-	40000	-
13.2(BIS Certification Marking)	-	5000	-
12.3.3(Safety Tests: )	-	0	-
12.2.6(Provisions for Earthing (Earth Resistance Test))	-	5000	-
12.2.5(Leakage Current Test)	-	5000	-
12.2.4(High Voltage Test)	-	5000	-
12.2.3(Insulation Resistance Test)	-	5000	-
12.2.2(Pressure Test or Leakage Test)	-	50000	-
12.2.1( Running Test)	-	0	-
11(Sound Test)	-	35000	-
9.3(Automatic Defrost Performance Test)	-	50000	-
9.2(Maximum Heating Performance Test)	-	80000	-
9.1(Heating Capacity Test)	-	100000	-
8.8(Power Consumption Test)	-	20000	-
7.6 & 8.7(Condensate Desposal Test)	-	40000	-
7.5 & 8.6(Enclosure Sweat Test)	-	30000	-
7.4 & 8.4, 8.5(Freeze-Up Test)	-	30000	-
7.3 & 8.3(Maximum Cooling Conditions Test)	-	80000	-
7.1 , 7.2 & 8.1(Capacity Rating Test & ISEER Test Condition )	-	150000	-
4.1 to 4.14(Constrution- IS 8148)	-	0	-
5(Dimensions (Type 2 C Drums Figure 2))	-	0	-

Complete

IS 1391 : Part 2 (2018)

Room air conditioners - Specification: Part 2 split air conditioners (Third Revision)

640000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause No. 8.2.2 (The Maximum Heating/Overload Test was conducted using a Balanced Ambient Room-Type Calorimeter. )	-	100000	-
Heating Capacity test (Clause No. 8.2.1, 9.11), Power consumption test by heat pump (Clause No. 9.8)(The Heating capacity test was conducted using a Balanced Ambient Room-Type Calorimeter. )	-	50000	-
Clause No. 5.1(Physical Verification)	-	0	-
Clause No. 15.3.3(a)(Protection against access to the live part was conducted using Test Probe B.)	-	5000	-
Clause No. 15.2.5 & 15.3.3(c)(Provision for Earthing (Earth Resistance Test) was conducted using a Earth Continuity Tester. )	-	5000	-
Clause No. 15.2.3 & 15.3.3(b)(High Voltage (Electric strength) Test was conducted using AC withstanding voltage/IR Tester. )	-	5000	-
Clause No. 15.2.4 & 15.3.3(d)( 3 Leakage Current at Operating Temperature (Leakage Current Test) was conducted using Leak Current Hitester.)	-	5000	-
Clause No. 14.3( Sound Test was conducted using Sound Level Meter. )	-	25000	-
Clause No. 8.1.3, 9.5( Freeze Up (Air Blockage Test & Drip Test) Test was conducted using a Balanced Ambient Room-Type Calorimeter. )	-	100000	Freeze Up (Air Blockage Test & Drip Test) Test charge below rated capacity 10.55 KW (3 Tr.) is Rs. 100000.00 Freeze Up (Air Blockage Test & Drip Test) Test charge rated capacity 10.55 kw and above (3 Tr. and above) is Rs. 125000.00
Clause No. 8.1.4, 9.6( Enclosure Sweat test was conducted using a Balanced Ambient Room-Type Calorimeter. )	-	50000	Enclosure Sweat test charge below rated capacity 10.55 KW (3 Tr.) is Rs. 50000.00 Enclosure Sweat test charge rated capacity 10.55 kw and above (3 Tr. and above) is Rs. 60000.00
Clause No. 8.1.2, 9.4(Maximum Operating test was conducted using a Balanced Ambient Room-Type Calorimeter. )	-	100000	Maximum Operating test below rated capacity 10.55 KW (3 Tr.) is Rs. 100000.00 Maximum Operating test rated capacity 10.55 kw and above (3 Tr. and above) is Rs. 125000.00
Cooling Capacity Test (Cl. No. 8.1.1, 9.9), Power Factor Test (Cl. No. 9.3), Power Consumption Test for Cooling (Cl. No. 9.7)(Cooling Capacity Test was conducted using a Balanced Ambient Room-Type Calorimeter. )	-	50000	Cooling Capacity Test below rated capacity 10.55 KW (3 Tr.) is Rs. 50000.00 Cooling Capacity Test rated capacity 10.55 kw and above (3 Tr. and above) is Rs. 60000.00
Cooling Capacity Test (Cl. No. 8.1.1, 9.9), Power Factor Test (Cl. No. 9.3), Power Consumption Test for Cooling (Cl. No. 9.7)(Cooling Capacity Test at Full Load and Half Load were conducted using a Balanced Ambient Room-Type Calorimeter. )	-	100000	Cooling Capacity Test at Full Load and Half Load Test below rated capacity 10.55 KW (3 Tr.) is Rs. 100000.00 Cooling Capacity Test at Full Load and Half Load Test rated capacity 10.55 kw and above (3 Tr. and above) is Rs.150000.00
Clause No. 15.4.2( Pressure Test or Leakage Test was conducted prior to start of Cooling Capacity Test using a Balanced Ambient Room-Type Calorimeter. )	-	10000	-
Strength requiement for Seat Cl9.1(The seat shall withstand the load of 1150 N for 30 minutes without permanent distortion of the seat or the hinge fittings or damage to any finish.)	-	10000	-
5.1(General- IS 1391 (Part 2))	-	0	-
5.2(Material- IS 1391 (Part 2))	-	0	-
5.3(Electrical Charged Paerts- IS 1391 (Part 2))	-	0	-
5.4(Refrigerent Circuit- IS 1391 (Part 2))	-	0	-
5.7(Air Filter- IS 1391 (Part 2))	-	0	-
5.8(Temreture Sensing Controlers- IS 1391 (Part 1), IS/IEC 60730 Part 2 Section 9)	-	0	-
5.9(Hermetic Compressor- IS 1391 (Part 1), IS 10617)	-	0	-
5.10(Motors- IS 1391 (Part 1), IS 996)	-	0	-
5.11(Heat Exchanger- IS 1391 (Part 1), IS 11329)	-	0	-
5.6(Grounding Terminal and Grounding Lead Wire- IS 1391 (Part 2), IS 302 (Part 1))	-	0	-
5(Dimensions (Type 2 C Drums Figure 2))	-	0	-
9.2(Safety Conditions for A3 refrigerants)	-	0	-
15.12.4,13.2(Leakage Current Test- IS 1391 (Part 2), IS 302 (Part 1))	-	0	-
9.12, 8.3, Annex-J(Measurement of ISEER- IS 1391 (Part 2))	-	0	-
9.10, 12(Sound Test- IS 1391 (Part 2))	-	0	-
9.11(Heating Capacity Test- IS 1391 (Part 2))	-	0	-
17(Marking- IS 1391(Part 2))	-	0	-
9.9(Cooling Capacity Test- IS 1391 (Part 2 ))	-	0	-

Complete

IS 1391 : Part 1 (2017)

Room air conditioners - Specification: Part 1 unitary air conditioners (Third Revision)

530000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause No. 9.2.2 (The Maximum Heating/Overload Test was conducted using a Balanced Ambient Room-Type Calorimeter. )	-	100000	-
Heating Capacity test (Clause No. 9.2.1), Power consumption test by heat pump ( Clause No. 10.9)(The Heating capacity test was conducted using a Balanced Ambient Room-Type Calorimeter. )	-	50000	-
Clause No. 5.1(Physical Verification)	-	0	-
Clause No. 16.3.3(a)(The Protection against access to the live part was conducted using Test Probe B.)	-	5000	-
Clause No. 16.2.5 & 16.3.3(c)(The Provision for Earthing (Earth Resistance Test) was conducted using a Earth Continuity Tester. )	-	5000	-
Clause No. 16.2.3 & 16.3.3(b)(The High Voltage (Electric strength) Test was conducted using AC withstanding voltage/IR Tester. )	-	5000	-
Clause No. 16.2.4 & 16.3.3(d)(The 3 Leakage Current at Operating Temperature (Leakage Current Test) was conducted using Leak Current Hitester. )	-	5000	-
Clause No. 15.3(Sound Test was conducted using Sound Level Meter. )	-	25000	-
Clause No. 9.1.3, 10.5(Freeze Up (Air Blockage Test & Drip Test) Test was conducted using a Balanced Ambient Room-Type Calorimeter. )	-	100000	-
Clause No. 9.1.4, 10.6(Enclosure Sweat test was conducted using a Balanced Ambient Room-Type Calorimeter. )	-	50000	-
Clause No. 9.1.2, 10.4(Maximum Operating test was conducted using a Balanced Ambient Room-Type Calorimeter. )	-	100000	-
Cooling Capacity Test (Cl. No. 9.1.1, 10.10), Power Factor Test (Cl. No. 10.3), Power Consumption Test for Cooling (Cl. No. 10.8) (Cooling Capacity Test was conducted using a Balanced Ambient Room-Type Calorimeter. )	-	50000	-
Cooling Capacity Test (Cl. No. 9.1.1, 10.10), Power Factor Test (Cl. No. 10.3), Power Consumption Test for Cooling (Cl. No. 10.8) (Cooling Capacity Test at Full Load and Half Load were conducted using a Balanced Ambient Room-Type Calorimeter. )	-	100000	-
Clause No. 16.4.2(Pressure Test or Leakage Test was conducted prior to start of Cooling Capacity Test using a Balanced Ambient Room-Type Calorimeter. )	-	10000	-
Strength requiement for Seat Cl9.1(The seat shall withstand the load of 1150 N for 30 minutes without permanent distortion of the seat or the hinge fittings or damage to any finish.)	-	10000	-
5.2(Material)	-	0	-
5.3.5(Electrical Cable)	-	0	-
5.4(Refrigerent Cycle)	-	0	-
5.7(Air Filter)	-	0	-
5.8(Temreture Sensing Controlers- IS 1391 (Part 1), IS/IEC 60730 Part 2 Section 9)	-	0	-
5.9(Hermetic Compressor)	-	0	-
5.10(Motors)	-	0	-
5.11(Heat Exchanger)	-	0	-
5.6(Grounding Terminal and Grounding Lead Wire)	-	0	-
5(Dimensions (Type 2 C Drums Figure 2))	-	0	-
10.7(Condensate disposal test as per)	-	0	-
10.11, 15(Sound Test)	-	0	-
10.12(Heating Capacity Test)	-	0	-
10.2(Safety Conditions for unit using A3 refrigerants)	-	0	-
18(Marking- IS 1391 (Part 1))	-	0	-

Complete

Bureau of Indian Standards

The National Standards Body of India

AC TEST LAB, COTERD SOLUTIONS (OPC) PRIVATE LIMITED

BLOCK ECOTECH VI PLOT NO. 62, SECTOR ECOTECH VI, GREATER NOIDA, Gautam Buddha Nagar, Uttar Pradesh, 201310

9561266784 anuj@coterd.com

Scope List