BIS - LIMS (Laboratory Information Management System)

National Institute of secondary steel technology

Post Box No. 92, GT Road, Sirhind Side, Opposite Floating restaurant, MANDI GOBINDGARH, Fatehgarh Sahib, Punjab, 147301

9815904568 info@nisst.org

Scope List

Reset

58 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Exclusion

Testing Charges (Excl. Of Taxes)

Facility Type

Effective Date

Validity Date

Remark

IS 15997 (2012)

Low nickel austenitic stainless steel sheet and strip for utensils and kitchen appliances - Specification

ALL GRADES ALL SIZES ALL DESIGNATION

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Freedom From Defects)	-	500	-
9.3(Tensile Test-1608:Part 1)	-	1500	-
11(Surface finish)	-	500	-
9.4(Erichsen Cupping Test,(Average depth of cupping) mm)	-	500	-
Cl. 8.1, 8.1.1 & 10.1 Table 1(Carbon -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	-
Cl. 8.1, 8.1.1 & 10.1 Table 1(Silicon -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	-
Cl. 8.1, 8.1.1 & 10.1 Table 1(Manganese -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	-
Cl. 8.1, 8.1.1 & 10.1 Table 1(Sulphur -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	-
Cl. 8.1, 8.1.1 & 10.1 Table 1(Phosphorus -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	-
Cl. 8.1, 8.1.1 & 10.1 Table 1(Nitrogen -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	2000	-

Complete

IS 15914 (2011)

High tensile strength flat rolled steel plate (Up To 6 Mm), sheet and strip for the manufacture of welded gas cylinder - Specification

ALL GRADES ALL SIZES ALL DESIGNATION

8500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 7(UTM)	-	1500	-
Cl 10(Length, Width & Thickness)	-	500	-
6.0(CARBON)	-	1000	-
6.0(SULPHUR)	-	1000	-
6.0(PHOSPHORUS)	-	1000	-
6.0(MANGANESE)	-	1000	-
6.0(SILICON)	-	1000	-
6.0(ALUMINIUM)	-	1500	-

Complete

IS 15103 (2002)

Fire resistant steel - Specification

ALL GRADES ALL SIZES ALL DESIGNATION

11500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 10(Tensile Test)	-	1500	-
Cl 11(Bend Test)	-	500	-
Cl 12(Impact Test)	-	1000	-
Cl 13(Freedom from Defects)	-	500	-
Clauses 6 & 7.1, Table- 1(FR- Fe 410, C)	-	1000	-
Clauses 6 & 7.1, Table- 1(FR- Fe 410, Si)	-	1000	-
Clauses 6 & 7.1, Table- 1(FR- Fe 410, Mn)	-	1000	-
Clauses 6 & 7.1, Table- 1(FR- Fe 410, P)	-	1000	-
Clauses 6 & 7.1, Table- 1(FR- Fe 410, S)	-	1000	-
Clauses 6 & 7.1, Table- 1(FR- Fe 410, Cr)	-	1500	-
Clauses 6 & 7.1, Table- 1(FR- Fe 410, Mo)	-	1500	-

Complete

Included w.e.f. 11-11-2021.

IS 11587 (1986)

Specification for structural weather resistant steels

ALL GRADES ALL SIZES ALL DESIGNATION

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 8(Tensile Test)	-	1500	-
Cl 9(Bend Test)	-	500	-
Cl 10(Impact Test)	-	1500	-
Cl 11(Flattening Test)	-	500	-
Clause 5.1, Table -1(WR-Fe 480 A, C )	-	1000	-
Clause 5.1, Table -1(WR-Fe 480 A, Si)	-	1000	-
Clause 5.1, Table -1(WR-Fe 480 A, Mn)	-	1000	-
Clause 5.1, Table -1(WR-Fe 480 A, P )	-	1000	-
Clause 5.1, Table -1(WR-Fe 480 A, S )	-	1000	-
Clause 5.1, Table -1(WR-Fe 480 B, Cr )	-	1500	-

Complete

Included w.e.f. 11-11-2021.

IS 4368 (1967)

Specification for alloy steel billets, blooms and slabs for forging for general engineering purposes

ALL GRADES ALL SIZES ALL DESIGNATION

10500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 11(Hardness & Tensile Test)	-	2000	-
Cl 8(Diameter, Ovality & Weight)	-	1000	-
6.1, Table-1(Ladle Analysis)	-	7000	-

Complete

Included w.e.f. 11-11-2021.

IS 11513 (2017)

Hot rolled carbon steel strip for cold rolling purposes - Specification (Second Revision)

ALL GRADES ALL SIZES ALL DESIGNATION

6500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 9(Length, Width, Thickness, Crown, Edge Camber & Difference in Thickness Across Width )	-	1500	-
6.1(Carbon %)	-	1000	-
6.1(Manganese %)	-	1000	-
6.1(Phosphorus %)	-	1000	-
6.1(Sulphur %)	-	1000	-
6.1(Silicon %)	-	1000	-

Complete

Included w.e.f. 11-11-2021.

IS 7283 (1992)

Hot - Rolled bars for the production of bright bars and machined parts for engineering applications specification (First Revision)

ALL GRADES ALL SIZES ALL DESIGNATION

5000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 8(Decarburization)	-	1500	-
Cl 9(Inclusion)	-	1500	-
Cl 10(Hardenability)	-	2000	-
Cl 11(Size)	-	1000	-

Complete

Included w.e.f. 11-11-2021.

IS 6240 (2008)

Hot rolled steel plate (Up To 6 Mm) sheet and strip for the manufacture of low pressure liquefiable gas cylinders (Fourth Revision)

ALL GRADES ALL SIZES ALL DESIGNATION

8000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 13(Length, Width & Thickness)	-	500	-
Cl 7(UTM)	-	1500	-
Cl 8(Press)	-	500	-
Cl 10(Erichsen Cupping)	-	500	-
6.1(Carbon %)	-	1000	-
6.1(Manganese %)	-	1000	-
6.1(Phosphorus %)	-	1000	-
6.1(Sulphur %)	-	1000	-
6.1(Silicon %)	-	1000	-

Complete

Included w.e.f. 11-11-2021.

IS 5986 (2017)

Hot rolled steel sheet, plate and strip for forming and flanging purposes - Specification (Fourth Revision)

ALL GRADES ALL SIZES ALL DESIGNATION

11000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 15(Length, Width & Thickness)	-	500	-
Cl 8(UTM)	-	1500	-
Cl 9(Press)	-	500	-
Cl 11(Expansion Test)	-	500	-
Cl 14(Weldability)	-	1500	-
7.1(Carbon %)	-	1000	-
7.1(Manganese %)	-	1000	-
7.1(Phosphorus %)	-	1000	-
7.1(Sulphur %)	-	1000	-
7.1(Silicon %)	-	1000	-
7.1( Aluminium %)	-	1500	-

Complete

Included w.e.f. 11-11-2021.

IS 3502 (2009)

Steel chequered plates (Third Revision)

ALL GRADES ALL SIZES ALL DESIGNATION

6000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 10(Length, Width, Thickness & Chequered Height)	-	500	-
Cl 8(UTM)	-	1500	-
Cl 9(Press)	-	500	-

Complete

Included w.e.f. 11-11-2021.

IS 2879 (1998)

Mild steel for metal arc welding electrodes - Specification (Third Revision)

ALL GRADES ALL SIZE ALL DESIGNATION

7000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 8 & 9(Diameter)	-	500	-
6(Carbon %)	-	1000	-
6(Manganese %)	-	1000	-
6(Phosphorus %)	-	1000	-
6(Sulphur %)	-	1000	-
6(Silicon %)	-	1000	-
6( Aluminium %)	-	1500	-

Complete

Included w.e.f. 11-11-2021.

IS 11169 : Part 1 (1984)

Specification for steels for cold heading/cold extrusion applications: Part 1 wrought carbon and low alloy steels

all grades all size all designation available

13500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
TABLE-1,2,3 (Clause 4,4.1,4.2,4.3)( CARBON)	-	1000	-
TABLE-1,2,3 (Clause 4,4.1,4.2,4.3)(SULPHUR)	-	1000	-
TABLE-1,2,3 (Clause 4,4.1,4.2,4.3)(PHOSPHURS)	-	1000	-
TABLE-1,2,3 (Clause 4,4.1,4.2,4.3)(MANGANESE)	-	1000	-
TABLE-1,2,3 (Clause 4,4.1,4.2,4.3)(NITROGEN)	-	2000	-
TABLE-1,2,3 (Clause 4,4.1,4.2,4.3)(SILICON)	-	1000	-
TABLE-1,2,3 (Clause 4,4.1,4.2,4.3)( ALUMINIUM)	-	1500	-
TABLE-1,2,3 (Clause 4,4.1,4.2,4.3)(Nickel)	-	1500	-
TABLE-1,2,3 (Clause 4,4.1,4.2,4.3)(Chromium)	-	1500	-
TABLE-1,2,3 (Clause 4,4.1,4.2,4.3)(Molybdenum)	-	1500	-
TABLE-1,2,3 (Clause 4,4.1,4.2,4.3)(NIOBIUM)	-	1500	-
TABLE-1,2,3 (Clause 4,4.1,4.2,4.3)(VANADIUM)	-	1500	-
TABLE-1,2,3 (Clause 4,4.1,4.2,4.3)(TIN)	-	1500	-
Cl 6(Diameter & Out Of Roundness)	-	500	-
TABLE-1,2,3 (Clause 4,4.1,4.2,4.3)(TITANIUM)	-	1500	-

Complete

Included w.e.f. 11-11-2021.

IS 513 : Part 2 (2016)

Cold reduced carbon steel sheet and strip: Part 2 high tensile and multi - Phase steel (Sixth Revision)

ALL GRADES ALL SIZE ALL DESIGNATION AVAILABLE

9500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 7(UTM)	-	1500	-
Cl 10(Length, Width & Thickness)	-	500	-
Cl 8.5(Workmanship)	-	500	-
6.0(NITROGEN)	-	2000	-
6.0(CARBON)	-	1000	-
6.0(SILICON)	-	1000	-
6.0(MANGANESE)	-	1000	-
6.0(SULPHUR)	-	1000	-
6.0(PHOSPHORUS)	-	1000	-

Complete

IS 513 : Part 1 (2016)

Cold reduced carbon steel sheet and strip: Part 1 cold forming and drawing purpose (Sixth Revision)

All Grades/ All Sizes/All Designation

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 10(Workmanship)	-	1500	-
Cl 8(UTM)	-	1500	-
Cl 11(Length, Width & Thickness)	-	500	-
7.0(CARBON)	-	1000	-
7.0(NITROGEN)	-	2000	-
7.0(SILICON)	-	1000	-
7.0(MANGANESE)	-	1000	-
7.0(PHOSPHORUS)	-	1000	-
7.0(SULPHUR)	-	1000	-
8(Mechanical and Physical Properties)	-	1500	-

Complete

IS 2062 (2011)

Hot rolled medium and high tensile structural steel - Specification (Seventh Revision)

All Grades/ All sizes/ All Designation

10500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 10.3(UTM)	-	1500	-
Cl 11.3(Press)	-	500	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Nitrogen- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	2000	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Carbon Equivalent- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	-
Cl 12(Sudden Load Applied)	-	1500	-

Complete

IS 1786 (2008)

High strength deformed steel bars and wires for concretere inforcement - Specification (Fourth Revision)

All Grades/ All Sizes/ All ADesignation

18000 View breakup
Rs.8000/- without pullout test, Rs.10000/- for pullout test only, Rs.18000/- with pullout test

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Carbon %)	-	500	-
4.1(Manganese %)	-	500	-
4.1(Silicon %)	-	500	-
4.1(Sulphur %)	-	500	-
4.1(Phosphorus %)	-	500	-
4.1( Nitrogen%)	-	2000	-
4.1(Ni)	-	1500	-
4.1(Cr)	-	1500	-
4.1(Mo)	-	1500	-
4.1( Ti)	-	1500	-
4.1(V)	-	1500	-
4.1( Nb)	-	1500	-
4.1( Aluminium %)	-	1500	-
4.1( Copper %)	-	1500	-
Cl 8.1(UTM)	-	1500	-
Cl. 9.3, Table 4(Bend Test )	-	500	-
Cl.9.4 & Cl. 9.4.1(Rebend test)	-	500	-
Cl. 5 (Cl. 5 - Mean projected area of transverse ribs (1/3 of Ar))	-	500	-
Cl. 5 (Cl.5 Mean area of ribs/unit length (Ar), )	-	500	-
Cl. 7.2 Table -2 (Nominal Mass)	-	500	-
Cl 6.1(Length, Width & Thickness)	-	500	-

Complete

IS 10748 (2004)

Hot - Rolled steel strip for welded tubes and pipes - Specification (Second Revision)

10000 View breakup
Rs.6500/- for (grade 1,2 & 3), Rs.10000/- (for grade 4,5 & 6 including micro alloying elements)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 9(Press)	-	500	-
Cl 12 & 13(Length, Width & Thickness)	-	1000	-
Cl 8 & Table 3(UTM)	-	1500	-
7.1(Carbon %)	-	1000	-
7.1(Manganese %)	-	1000	-
7.1(Phosphorus %)	-	1000	-
7.1(Silicon %)	-	1000	-
7.1( Nitrogen%)	-	2000	-
7.1(Sulphur %)	-	1000	-

Complete

IS 15647 (2006)

Hot rolled steel narrow width strip for welded tubes and pipes

8500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 8(UTM)	-	1500	-
Cl 9(Press)	-	500	-
Cl 12(Length, Width & Thickness)	-	500	-

Complete

IS 2830 (2012)

Carbon steel cast billet ingots, billets, blooms and slabs for re-rolling into steel for general structural purposes - Specification (Third Revision)

7500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1(Carbon %)	-	1000	-
6.1(Silicon %)	-	1000	-
6.1(Manganese %)	-	1000	-
6.1(Phosphorus %)	-	1000	-
6.1(Sulphur %)	-	1000	-
6.1( Nitrogen%)	-	2000	-
Cl 11(Length, Width & Thickness)	-	500	-
Cl 9(Workmanship)	-	500	-
Cl 10.2(Workmanship)	-	500	-

Complete

IS 2831 (2012)

Carbon steel cast billet ingots, billets, blooms and slabs for re-rolling into structural steel (Ordinary Quality) - Specification (Fourth Revision)

8700 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 6.1, Table 1(Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	AS PER STANDARD
Cl. 6.1, Table 1(Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	AS PER STANDARD
Cl. 6.1, Table 1(Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	AS PER STANDARD
Cl. 6.1, Table 1(Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	AS PER STANDARD
Cl. 6.1, Table 1(Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	AS PER STANDARD
Cl. 6.1, Table 1(Nitrogen- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	2000	AS PER STANDARD
Cl. 6.1, Table 1(Aluminium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1500	AS PER STANDARD
Cl. 6.1, Table 1(Copper- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1500	AS PER STANDARD
Cl. 6.1, Table 1(Niobium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1500	AS PER STANDARD
Cl. 6.1, Table 1(Vanadium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1500	AS PER STANDARD
Cl. 6.1, Table 1(Titanium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1500	AS PER STANDARD
9( FREEDOM FROM DEFECTS)	-	500	AS PER STANDARD
11 & 12(DIMENSIONS and Tolerances)	-	500	AS PER STANDARD
10.1.a)( Macro examination IS 11371)	-	1500	AS PER STANDARD
10.1.b)( Sulphur print tests IS 12037)	-	2000	AS PER STANDARD

Complete

IS 1079 (2017)

Hot rolled carbon steel sheet, plate and strip - Specification (Seventh Revision)

8185 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1(Carbon %)	-	500	AS PER STANDARD
6.1(Manganese %)	-	500	AS PER STANDARD
6.1(Silicon %)	-	500	AS PER STANDARD
6.1(Sulphur %)	-	500	AS PER STANDARD
6.1(Phosphorus %)	-	500	AS PER STANDARD
6.1( Nitrogen%)	-	2000	AS PER STANDARD
6.1( Aluminium %)	-	1500	AS PER STANDARD
6.1( Copper %)	-	1500	AS PER STANDARD
6.1( Nb)	-	1500	AS PER STANDARD
6.1(V)	-	1500	AS PER STANDARD
6.1( Ti)	-	1500	AS PER STANDARD
Cl 8(UTM)	-	500	AS PER STANDARD
Cl 13(Length, Width & Thickness)	-	500	AS PER STANDARD
Cl 9(Press)	-	500	AS PER STANDARD

Complete

IS 1341 (2018)

Steel Butt Hinges - Specification (Sixth Revision)

1500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
TABLE-1 (Clause-4)( CARBON)	-	500	-
TABLE-1 (Clause-4)(MANGANESE)	-	500	-
TABLE-1 (Clause-4)(SILICON)	-	500	-
TABLE-1 (Clause-4)(SULPHUR)	-	500	-
TABLE-1 (Clause-4)(PHOSPHURS)	-	500	-
TABLE-1 (Clause-4)( ALUMINIUM)	-	1500	-
TABLE-1 (Clause-4)(Nickel)	-	1500	-
TABLE-1 (Clause-4)(Chromium)	-	1500	-
TABLE-1 (Clause-4)(Molybdenum)	-	1500	-
TABLE-1 (Clause-4)(NIOBIUM)	-	1500	-
TABLE-1 (Clause-4)(VANADIUM)	-	1500	-
TABLE-1 (Clause-4)(TITANIUM)	-	1500	-
3 Tables 2 to 9(Types)	-	1000	-

Complete

IS 432 : Part 1 (1982)

Mild Steel and Medium Tensile Steel Bars and Hard-Drawn Steel Wire for Concrete Reinforcement: Part 1 Mild Steel and Medium Tensile Steel Bars

2500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause -4, 4.1( CARBON)	-	500	-
Clause -4, 4.1(MANGANESE)	-	500	-
Clause -4, 4.1(SILICON)	-	500	-
Clause -4, 4.1(SULPHUR)	-	500	-
Clause -4, 4.1(PHOSPHURS)	-	500	-
Clause -4, 4.1(NITROGEN)	-	2000	-
Clause -4, 4.1( ALUMINIUM)	-	1500	-
Clause -4, 4.1(Nickel)	-	1500	-
Clause -4, 4.1(Chromium)	-	1500	-
Clause -4, 4.1(Molybdenum)	-	1500	-
Clause -4, 4.1(NIOBIUM)	-	1500	-
Clause -4, 4.2(VANADIUM)	-	1500	-
Clause -4, 4.3(TITANIUM)	-	1500	-
Cl 8(Physical Requirements)	-	1500	-
Cl 6.1(Diameter)	-	500	-
Cl 6.2(Weight)	-	500	-

Complete

IS 432 : Part 2 (1982)

Mild Steel and Medium Tensile Steel Bars and Hard-Drawn Steel Wire for Concrete Reinforcement: Part 2 Hard-Drawn Steel Wire

2500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 3.1.1(Sulphur)	-	500	-
Clause 3.1.1(Phosphorus)	-	500	-
Cl 7(UTM)	-	1500	-
Cl 5 & 6(Diameter)	-	500	-
Cl 8.3(Bending To Both Side At 90°, Then Straight)	-	500	-

Complete

IS 1038 (1983)

Specification For Steel Doors, Windows And Ventilators

5500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1.(Size-Height)	-	500	-
6.1.1.2(Macro Examination)	-	1500	-
6.1.1.3(Micro Examination)	-	1500	-
4.1(Size-Width)	-	500	-
6.2(Side Hung Shutter- Thickness of hinge)	-	500	-
6.2(Side Hung Shutter- Pin diameter)	-	500	-
6.2(Side Hung Shutter-Width of hinge)	-	500	-

Complete

IS 7887 (1992)

Mild steel wire rod for general engineering purposes - Specification (First Revision)

4500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1(Carbon %)	-	600	-
6.1(Manganese %)	-	600	-
6.1(Silicon %)	-	600	-
6.1(Sulphur %)	-	600	-
6.1(Phosphorus %)	-	600	-
6.1( Aluminium %)	-	1500	-
Cl 9(Nominal Diameter & Out Of Shape)	-	500	-
6.1(Silicon %)	-	1000	-

Complete

IS 277 (2018)

Galvanized steel strips and sheets (Plain And Corrugated) - Specification (Seventh Revision)

All grades and sizes testing available

3000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.4(Mass of Coating: Single Spot Test)	-	2500	-
Cl 10(Galvanising Test)	-	2500	-
Cl 8.1(UTM)	-	500	-
Cl 14(Length, Width & Thickness)	-	500	-
Cl 13(Weight)	-	500	-
Cl 8.2(Press)	-	500	-
Cl. 14 & Cl. 15 (Cl. 14 & Cl 15 (Pitch of Corrugation))	-	500	-
Cl. 14 & Cl. 15 (Cl. 14 & Cl 15 (Depth of Corrugation))	-	500	-
Cl. 14 & Cl. 15 (Cl. 14 & Cl 15 (Number of Corrugation))	-	500	-
Cl. 14 & Cl. 15 (Cl. 14 & Cl 15 (Difference between Diagonal))	-	500	-
Cl. 14 & Cl. 15 (Cl. 14 & Cl. 15 (Thickness))	-	500	-
Cl. 8.1 (Cl. 8.1 (Tensile Strength))	-	500	-
Cl. 8.1 (Cl. 8.1 (Yield Stress))	-	500	-
Cl. 8.1 (Cl. 8.1 (Percentage Elongation ))	-	500	-

Complete

IS 210 (2009)

Grey iron castings - Specification (First Revision)

All Grades and size

4050 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Chemical Composition(chemical composition shall be as agreed to between the purchaser and the manufacturer.))	-	1000	AS PER REQUIREMENT
15, Table 3(TENSIL.E TEST- IS 1608 Part1 )	-	1500	Dumble Sample Preparation Rs.500/-
16, Table 3(Hardness Test)	-	500	AS PER STANDARD
13(SIZE OF TEST BARS-Diameter)	-	250	AS PER STANDARD
13(SIZE OF TEST BARS-Length)	-	250	AS PER STANDARD
17,Annex B(TRANSVERSE TEST)	-	500	AS PER STANDARD
10.1(FREEDOM FROM DEFECTS)	-	500	AS PER STANDARD

Complete

Bureau of Indian Standards

The National Standards Body of India

National Institute of secondary steel technology

Post Box No. 92, GT Road, Sirhind Side, Opposite Floating restaurant, MANDI GOBINDGARH, Fatehgarh Sahib, Punjab, 147301

9815904568 info@nisst.org

Scope List