BIS - LIMS (Laboratory Information Management System)

EKO PRO ENGINEERS PRIVATE LIMITED (32/37) GHAZIABAD

32/37, SOUTH SIDE OF G.T ROAD, INDUSTRIAL AREA, Ghaziabad, Uttar Pradesh, Ghaziabad, Ghaziabad, Uttar Pradesh, 201009

9810243870 labs@ekopro.in

Scope List

Reset

92 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

IS 723 (2023)

Steel Countersunk Head Wire Nails ï¿½ Specification ( Second Revision )

All

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Dimensions & tolerances (Except 120° angle))	-	2500	Excluding Critical Dimensions
4.2(Bend of shank)	-	1000	-
5(General requirements (Except Concentricity of head with the shank))	-	500	-
6(Finish)	-	500	-
7(Bend test)	-	1000	-
Cl.3(Carbon- Relevant parts of IS 228 or any other established chemical/instrumental method)	-	2000	-
Cl.3(Sulphur- Relevant parts of IS 228 or any other established chemical/instrumental method)	-	1000	-
Cl.3(Phosphorous- Relevant parts of IS 228 or any other established chemical/instrumental method)	-	1000	-
Cl.3(Manganese- IRelevant parts of IS 228 or any other established chemical/instrumental method)	-	1000	-
Cl.3(Silicon- Relevant parts of IS 228 or any other established chemical/instrumental method)	-	1000	-
Cl.3(Aluminium-Relevant parts of IS 228 or any other established chemical/instrumental method)	-	1000	-
Cl.3(Copper- Relevant parts of IS 228 or any other established chemical/instrumental method)	-	1000	-
Clause. 4.3(Eccentricity)	-	500	-
Clause. 4.3(ovality)	-	500	-
Cl-4(Dimensions & Tolerances-Shank Diameter)	-	500	-
Cl-4(Dimensions & Tolerances-Head Diameter)	-	500	-
Cl-4(Dimensions & Tolerances-Length)	-	500	-
Cl-4(Approximate no of nails /kg)	-	500	-
Cl-4(Eccentricity and ovality of centre of nail head from axis of shank)	-	500	-
Cl-5(Dimensions and Tolerances Angle of Countersunk, (in°))	-	500	-
Cl-11(Marking)	-	500	-

27 May, 2028

-
-

IS 1489 (Part 1) (2015)

Portland pozzolana cement - Specification: Part 1 fly Ash Based

ALL

3340 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7 -Table 2- vi(Drying Shrinkage- IS 4031 Part 10)	-	3340	-
7 -Table 2- v(Transverse Strength - IS 4031 Part 8 (Optional))	-	0	-
7 -Table 2- iv- c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	3340	-
7 -Table 2- iv- b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	3340	-
7 -Table 2- iv- a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	3340	-
7 -Table 2-iii- b(Setting Time Final- 4031 Part 5)	-	3340	-
7 -Table 2- iii- a(Setting Time Initial- 4031 Part 5)	-	3340	-
7 -Table 2- ii- b(Expansion after aeration- 4031 Part 3)	-	3340	-
7 -Table 2- ii- b(Expansion by Autoclave- 4031 Part 3)	-	3340	-
7 -Table 2- ii- a(Expansion after aeration - 4031 Part 3)	-	3340	-
7 -Table 2- ii- a(Expansion by Le Chatelier- 4031 Part 3)	-	3340	-
7 -Table 2- i(Fineness 4031 Part 2)	-	3340	-
6 - Table - 1 vi( Alkali content as (Na2O + 0.658 K2O) - Cl 4.11 of IS 4032:1985)	-	3340	-
6 - Table - 1 v(Chloride content - Cl 4.13 of IS 4032:1985)	-	3340	-
6 - Table - 1 iv(Loss on ignition - Cl 7.1 of IS 4032:1985)	-	3340	-
6 - Table - 1 iii(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 7.3 of IS 4032:1985)	-	3340	-
6 - Table - 1 ii(Magnesia - Cl 7.2 of IS 4032:1985)	-	3340	-
6 - Table - 1 i(Insoluble residue - Cl 7.4 of IS 4032:1985)	-	3340	-
6 - Table - 1 vi( Alkali content as (Na2O + 0.658 K2O) - Cl 4.11 of IS 4032:1985)	-	3340	-
6 - Table - 1 v(Chloride content - Cl 4.13 of IS 4032:1985)	-	3340	-
6 - Table - 1 iv(Loss on ignition - Cl 7.1 of IS 4032:1985)	-	3340	-
6 - Table - 1 iii(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 7.3 of IS 4032:1985)	-	3340	-
6 - Table - 1 ii(Magnesia - Cl 7.2 of IS 4032:1985)	-	3340	-
6 - Table - 1 i(Insoluble residue - Cl 7.4 of IS 4032:1985)	-	3340	-
7 -Table 2- vi(Drying Shrinkage- IS 4031 Part 10)	-	3340	-
7 -Table 2- v(Transverse Strength - IS 4031 Part 8 (Optional))	-	0	-
7 -Table 2- iv- c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	3340	-
7 -Table 2- iv- b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	3340	-
7 -Table 2- iv- a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	3340	-
7 -Table 2-iii- b(Setting Time Final- 4031 Part 5)	-	3340	-
7 -Table 2- iii- a(Setting Time Initial- 4031 Part 5)	-	3340	-
7 -Table 2- ii- b(Expansion after aeration- 4031 Part 3)	-	3340	-
7 -Table 2- ii- b(Expansion by Autoclave- 4031 Part 3)	-	3340	-
7 -Table 2- ii- a(Expansion after aeration - 4031 Part 3)	-	3340	-
7 -Table 2- ii- a(Expansion by Le Chatelier- 4031 Part 3)	-	3340	-
7 -Table 2- i(Fineness 4031 Part 2)	-	3340	-
6 - Table - 1 vi( Alkali content as (Na2O + 0.658 K2O) - Cl 4.11 of IS 4032:1985)	-	3340	-
6 - Table - 1 v(Chloride content - Cl 4.13 of IS 4032:1985)	-	3340	-
6 - Table - 1 iv(Loss on ignition - Cl 7.1 of IS 4032:1985)	-	3340	-
6 - Table - 1 iii(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 7.3 of IS 4032:1985)	-	3340	-
6 - Table - 1 ii(Magnesia - Cl 7.2 of IS 4032:1985)	-	3340	-
6 - Table - 1 i(Insoluble residue - Cl 7.4 of IS 4032:1985)	-	3340	-
6 - Table - 1 vi( Alkali content as (Na2O + 0.658 K2O) - Cl 4.11 of IS 4032:1985)	-	3340	-
6 - Table - 1 v(Chloride content - Cl 4.13 of IS 4032:1985)	-	3340	-
6 - Table - 1 iv(Loss on ignition - Cl 7.1 of IS 4032:1985)	-	3340	-
6 - Table - 1 iii(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 7.3 of IS 4032:1985)	-	3340	-
6 - Table - 1 ii(Magnesia - Cl 7.2 of IS 4032:1985)	-	3340	-
6 - Table - 1 i(Insoluble residue - Cl 7.4 of IS 4032:1985)	-	3340	-
Clause 7 Table 2 SI No. (v) (Compressive strength of Transverse Specimen, 672 ± 4 h)	-	0	-
Clause 7 Table 2 SI No. (v) (Compressive strength of Transverse Specimen, 168 ± 2 h)	-	0	-
Clause 7 Table 2 SI No. (v) (Compressive strength of Transverse Specimen, 72 ± 1 h)	-	0	-
Clause 7 Table 2 SI No. (v) (Transverse Strength, 672 ± 4 h)	-	0	-
Clause 7Table 2 SI No. (v)(Transverse Strength, 168 ± 2 h)	-	0	-
Clause 7Table 2 SI No. (v)(Transverse Strength, 72 ± 1 h)	-	0	-
11(Marking)	-	3340	-
4(RAW MATERIAL)	-	3340	-
11(MARKING)	-	3340	-

27 May, 2028

-
-

IS 1489 : Part 2 (2015)

Portland - Pozzolana cement - Specification: Part 2 calcined clay based

ALL

3340 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
11(Marking)	-	3340	-
6 - Table - 1 ii(Magnesia - Cl 7.2 of IS 4032:1985)	-	3340	-
6 - Table - 1 iii(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 7.3 of IS 4032:1985)	-	3340	-
6 - Table - 1 iv(Loss on ignition - Cl 7.1 of IS 4032:1985)	-	3340	-
6 - Table - 1 v(Chloride content - Cl 4.13 of IS 4032:1985)	-	3340	-
6 - Table - 1 vi( Alkali content as (Na2O + 0.658 K2O) - Cl 4.11 of IS 4032:1985)	-	3340	-
7 -Table 2- i(Fineness 4031 Part 2)	-	3340	-
7 -Table 2- ii- a(Expansion by Le Chatelier- 4031 Part 3)	-	3340	-
7 -Table 2- ii- a(Expansion after aeration - 4031 Part 3)	-	3340	-
7 -Table 2- ii- b(Expansion by Autoclave- 4031 Part 3)	-	3340	-
7 -Table 2- ii- b(Expansion after aeration- 4031 Part 3)	-	3340	-
7 -Table 2- iii- a(Setting Time Initial- 4031 Part 5)	-	3340	-
7 -Table 2-iii- b(Setting Time Final- 4031 Part 5)	-	3340	-
7 -Table 2- iv- a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	3340	-
7 -Table 2- iv- b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	3340	-
7 -Table 2- iv- c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	3340	-
7 -Table 2- v(Transverse Strength - IS 4031 Part 8 (Optional))	-	0	-
7 -Table 2- vi(Drying Shrinkage- IS 4031 Part 10)	-	3340	-
6 - Table - 1 i(Insoluble residue - Cl 7.4 of IS 4032:1985)	-	3340	-
6 - Table - 1 ii(Magnesia - Cl 7.2 of IS 4032:1985)	-	3340	-
6 - Table - 1 iii(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 7.3 of IS 4032:1985)	-	3340	-
6 - Table - 1 iv(Loss on ignition - Cl 7.1 of IS 4032:1985)	-	3340	-
6 - Table - 1 v(Chloride content - Cl 4.13 of IS 4032:1985)	-	3340	-
6 - Table - 1 vi( Alkali content as (Na2O + 0.658 K2O) - Cl 4.11 of IS 4032:1985)	-	3340	-
7 -Table 2- i(Fineness 4031 Part 2)	-	3340	-
7 -Table 2- ii- a(Expansion by Le Chatelier- 4031 Part 3)	-	3340	-
7 -Table 2- ii- a(Expansion after aeration - 4031 Part 3)	-	3340	-
7 -Table 2- ii- b(Expansion by Autoclave- 4031 Part 3)	-	3340	-
7 -Table 2- ii- b(Expansion after aeration- 4031 Part 3)	-	3340	-
7 -Table 2- iii- a(Setting Time Initial- 4031 Part 5)	-	3340	-
7 -Table 2-iii- b(Setting Time Final- 4031 Part 5)	-	3340	-
7 -Table 2- iv- a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	3340	-
7 -Table 2- iv- b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	3340	-
7 -Table 2- iv- c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	3340	-
7 -Table 2- v(Transverse Strength - IS 4031 Part 8 (Optional))	-	0	-
7 -Table 2- vi(Drying Shrinkage- IS 4031 Part 10)	-	3340	-
Clause 7 Table 2 SI No. (v) (Compressive strength of Transverse Specimen, 672 ± 4 h)	-	0	-
Clause 7 Table 2 SI No. (v) (Compressive strength of Transverse Specimen, 168 ± 2 h)	-	0	-
Clause 7 Table 2 SI No. (v) (Compressive strength of Transverse Specimen, 72 ± 1 h)	-	0	-
Clause 7 Table 2 SI No. (v) (Transverse Strength, 672 ± 4 h)	-	0	-
Clause 7Table 2 SI No. (v)(Transverse Strength, 168 ± 2 h)	-	0	-
Clause 7Table 2 SI No. (v)(Transverse Strength, 72 ± 1 h)	-	0	-
11(Marking)	-	3340	-
4(RAW MATERIAL)	-	3340	-

27 May, 2028

-
-

IS 5244 (2020)

Safe Deposit Locker Cabinets — Specification ( Fourth Revision )

29500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 4.1( Types )	-	29500	-
Cl. 6 (Fig-5)(Cabinet Size (in mm))	-	29500	-
Table 1(Thickness Min. (in mm))	-	29500	-
Table 1(Thickness Min. (in mm))	-	29500	-
Table 1(Thickness Min. (in mm))	-	29500	-
Table 1(Thickness Min. (in mm))	-	29500	-
Table 1(Thickness Min. (in mm))	-	29500	-
Table 1(Thickness Min. (in mm))	-	29500	-
Table 1(Thickness Min. (in mm))	-	29500	-
Table 1(Thickness Min. (in mm))	-	29500	-
Table 1(Thickness Min. (in mm))	-	29500	-
Table 1(Thickness Min. (in mm))	-	29500	-
Table 1(Finish)	-	29500	-
Table 1(Finish)	-	29500	-
Cl.6(Sizes (Minimum Inside Measurements of locker) Locker Size)	-	29500	-
Cl.6(Sizes (Minimum Inside Measurements of locker) Locker Size)	-	29500	-
Cl.6(Sizes (Minimum Inside Measurements of locker) Locker Size)	-	29500	-
Cl. 7.1(Design and Manufacture)	-	29500	-
Cl. 7.1(Design and Manufacture)	-	29500	-
Cl. 7.1(Design and Manufacture)	-	29500	-
Cl. 7.1(Design and Manufacture)	-	29500	-
Cl. 7.1(Design and Manufacture)	-	29500	-
Cl. 7.2(Design and Manufacture)	-	29500	-
Cl. 7.3(Design and Manufacture)	-	29500	-
Cl. 7.3(Design and Manufacture)	-	29500	-
Cl. 7.4(Design and Manufacture)	-	29500	-
Cl. 7.5(Design and Manufacture)	-	29500	-
Cl. 7.6(Design and Manufacture)	-	29500	-
Cl. 8(Workmanship)	-	29500	-
Cl. 8.2(Tolerance)	-	29500	-
Cl. 9.1(Testing)	-	29500	-
Cl. 9.2(Testing)	-	29500	-
Cl. 9.3(Cross Hatch Test)	-	29500	-
Cl. 10.1(Marking)	-	29500	-
Cl. 10.2(Marking)	-	29500	-
Cl. 10.3(Marking)	-	29500	-
Cl. 10.4(Marking on Keys)	-	29500	-
Cl. 11(Packing)	-	29500	-

27 May, 2028

-
-

IS 737 (2024)

WROUGHT ALUMINIUM AND ALUMINIUM ALLOY SHEET AND STRIP FOR GENERAL ENGINEERING PURPOSES SPECIFICATION (Fifth Revision)

ALL

5500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 4(Ordering Information - IS 737)	-	5500	-
Cl. 4 (a)(Grade/ Thickness - IS 737)	-	5500	-
Cl. 4 (b)(Condition - IS 737)	-	5500	-
Cl. 4 (c)(Quantity in Kg - IS 737)	-	5500	-
Cl. 4 (d)(Size - Thickness X Width X Length (T X W X L) in mm for sheets and (T X W) in mm for Strips/ Coils - IS 737)	-	5500	-
Cl. 4 (e)(Coil ID and Coil Weight for Strips/ Coils - IS 737)	-	5500	-
Cl. 4 (f)(Core/ Spool Requirement for Coils - IS 737)	-	5500	-
Cl. 4 (g)(Packing Mode - IS 737)	-	5500	-
Cl. 5(Supply for Material - IS 737/ IS 10259)	-	5500	-
Cl. 6(Freedom from Defects - IS 737)	-	5500	-
Cl. 7(Chemical Composition - IS 504/ IS 504 (Part-1 to 12)/ IS 504 (Part-13 to 16)/ ASTM E 1251/ IS 11035)	-	5500	-
Cl. 7(Si - IS 504 (Part-1)/ ASTM E 1251/ IS 11035)	-	5500	-
Cl. 7(Fe - IS 504 (Part-2)/ ASTM E 1251/ IS 11035)	-	5500	-
Cl. 7(Cu - IS 504 (Part-3)/ ASTM E 1251/ IS 11035)	-	5500	-
Cl. 7(Mn - IS 504 (Part-5)/ ASTM E 1251/ IS 11035)	-	5500	-
Cl. 7(Mg - IS 504 (Part-6)/ ASTM E 1251/ IS 11035)	-	5500	-
Cl. 7(Cr - IS 504 (Part-8)/ ASTM E 1251/ IS 11035)	-	5500	-
Cl. 7(Zn - IS 504 (Part-4)/ ASTM E 1251/ IS 11035)	-	5500	-
Cl. 7(Ti - IS 504 (Part-11)/ ASTM E 1251/ IS 11035)	-	5500	-
Cl. 7(Others (Each) - IS 504/ IS 504 (Part-1 to 12)/ IS 504 (Part-13 to 16)/ ASTM E 1251/ IS 11035)	-	5500	-
Cl. 7(Others (Total) - IS 504/ IS 504 (Part-1 to 12)/ IS 504 (Part-13 to 16)/ ASTM E 1251/ IS 11035)	-	5500	-
Cl. 7(Al - IS 504)	-	5500	-
Cl. 8(Mechanical Properties - IS 1608 (Part-1))	-	5500	-
Cl. 8.1(0.2% Proof Stress - IS 1608 (Part-1))	-	5500	-
Cl. 8.1(Tensile Strength - IS 1608 (Part-1))	-	5500	-
Cl. 8.1(Elongation on 50mm Gauge Length - IS 1608 (Part-1))	-	5500	-
Cl. 8.2(Bend Test - IS 1599)	-	5500	-
Cl. 9(Condition - IS 737/ IS 5052)	-	5500	-
Cl. 10(Dimensions and Tolerances - IS 737/ IS 2676)	-	5500	-
Cl. 11(Selection of Test Samples - IS 737)	-	5500	-
Cl. 11.1(Sheet and Strip of Aluminium or Non - Heat Treatable Aluminium Alloy - IS 737)	-	5500	-
Cl. 11.2(Sheet and Strip of Heat - Treatable Aluminium Alloys - IS 737)	-	5500	-
Cl. 12(Retests - IS 737/ IS 10259)	-	5500	-
Cl. 13(Packaging - IS 737/ IS 10259)	-	5500	-
Cl. 13.1(Marking - IS 737)	-	5500	-

27 May, 2028

-
-

IS 733 (2025)

Wrought Aluminium and Aluminium Alloy Bars, Rods, Sections, Extruded Tube, Hollow Sections and Profiles for General Engineering Purposes ? Specification (Fourth Revision)

ALL

8000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4(General requirements)	-	8000	-
Cl-6.1, Table-1 to 8(Fe)	-	8000	-
Cl-6.1, Table-1 to 8(Cu)	-	8000	-
Cl-6.1, Table-1 to 8(Mn)	-	8000	-
Cl-6.1, Table-1 to 8(Mg)	-	8000	-
Cl-6.1, Table-1 to 8(Cr)	-	8000	-
Cl-6.1, Table-1 to 8(Zn)	-	8000	-
Cl-6.1, Table-1 to 8(Ti)	-	8000	-
Cl-6.1, Table-1 to 8(V)	-	8000	-
Cl-6.1, Table-1 to 8(Aluminium)	-	8000	-
Cl-6.2(chemical analysis)	-	8000	-
Cl-7.1, 7.2 & 7.3, Table-9(Dimensions)	-	8000	-
Cl-7.1, 7.2 & 7.3, Table-9(Rm MPa)	-	8000	-
Cl-7.1, 7.2 & 7.3, Table-9(Rp0.2 MPa)	-	8000	-
Cl-7.1, 7.2 & 7.3, Table-9(Elongation , Percent)	-	8000	-
Cl-9(Dimensions and Tolerances)	-	8000	-
Cl-12(Packaging and Marking)	-	8000	-
Cl-7.1(Tensile test)	-	8000	-
Cl-5(Freedom from Defects)	-	8000	-
Cl-6.1, Table-1 to 8(Si)	-	8000	-

27 May, 2028

-
Included w.e.f. 24.02.2026

IS 2590 (1987)

Specification for primary aluminium ingots for remelting for general engineering purposes (Second Revision)

ALL

7500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(General requirements )	-	7500	-
4(Manufacture )	-	7500	-
5(Grades)	-	7500	-
6.1(Chemical composition )	-	7500	-
7.1(Shapes and sizes)	-	7500	-
9(Marking)	-	7500	-
Table-1, Clause - 6.1.1(Copper)	-	7500	-
Table-1, Clause - 6.1.1(Iron)	-	7500	-
Table-1, Clause - 6.1.1(Magnesium)	-	7500	-
Table-1, Clause - 6.1.1(Manganese)	-	7500	-
Table-1, Clause - 6.1.1(Titanium + Vanadium)	-	7500	-
Table-1, Clause - 6.1.1(Silicon)	-	7500	-
Table-1, Clause - 6.1.1(Vanadium)	-	7500	-
Table-1, Clause - 6.1.1(Zinc)	-	7500	-
Table-1, Clause - 6.1.1(Other elements (each))	-	7500	-
Table-1, Clause - 6.1.1(Others Total)	-	7500	-
Table-1, Clause - 6.1.1(Aluminium)	-	7500	-

27 May, 2028

-
included w.e.f 22.01.2026

IS 740 (1977)

Specification for wrought aluminium and aluminium alloy rivet stock for general engineering purposes (Second Revision)

ALL

9500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1, Table 1of IS:740 (Designation & Condition 65032, 'W')(Tensile Strength of Size upto and including 25 mm)	-	9500	-
4.1, Table 1of IS:740 (Designation & Condition 64430, 'W')(Tensile Strength of Size upto and including 25 mm)	-	9500	-
4.1, Table 1of IS:740 (Designation & Condition 55000, 'OD')(Tensile Strength of Size upto and including 25 mm)	-	9500	-
4.1, Table 1of IS:740 (Designation & Condition 55000, 'O or M')(Tensile Strength of Size upto and including 25 mm)	-	9500	-
4.1, Table 1of IS:740 (Designation & Condition 53000, 'OD')(Tensile Strength of Size upto and including 25 mm)	-	9500	-
4.1, Table 1of IS:740 (Designation & Condition 53000, 'O or M')(Tensile Strength of Size upto and including 25 mm)	-	9500	-
4.1, Table 1of IS:740 (Designation & Condition 24345, 'W')(Tensile Strength of Size upto and including 12 mm)	-	9500	-
4.1, Table 1of IS:740 (Designation & Condition 19000, '112')(Tensile Strength of Size upto and including 12 mm)	-	9500	-
4.1, Table 1of IS:740 (Designation 65032)(Aluminium)	-	9500	-
4.1, Table 1of IS:740 (Designation 65032)(Either Cr or Mn shall present)	-	9500	-
4.1, Table 1of IS:740 (Designation 65032)(Chromium)	-	9500	-
4.1, Table 1of IS:740 (Designation 65032)(Titanium and or other grain refining elements)	-	9500	-
4.1, Table 1of IS:740 (Designation 65032)(Zinc)	-	9500	-
4.1, Table 1of IS:740 (Designation 65032)(Manganese)	-	9500	-
4.1, Table 1of IS:740 (Designation 65032)(Iron)	-	9500	-
4.1, Table 1of IS:740 (Designation 65032)(Silicon)	-	9500	-
4.1, Table 1of IS:740 (Designation 65032)(Magnesium)	-	9500	-
4.1, Table 1of IS:740 (Designation 65032)(Copper)	-	9500	-
4.1, Table 1of IS:740 (Designation 64430)(Aluminium)	-	9500	-
4.1, Table 1of IS:740 (Designation 64430)(Cr+Mn)	-	9500	-
4.1, Table 1of IS:740 (Designation 64430)(Chromium)	-	9500	-
4.1, Table 1of IS:740 (Designation 64430)(Titanium and or other grain refining elements)	-	9500	-
4.1, Table 1of IS:740 (Designation 64430)(Zinc)	-	9500	-
4.1, Table 1of IS:740 (Designation 64430)(Manganese)	-	9500	-
4.1, Table 1of IS:740 (Designation 64430)(Iron)	-	9500	-
4.1, Table 1of IS:740 (Designation 64430)(Silicon)	-	9500	-
4.1, Table 1of IS:740 (Designation 64430)(Magnesium)	-	9500	-
4.1, Table 1of IS:740 (Designation 64430)(Copper)	-	9500	-
4.1, Table 1of IS:740 (Designation 55000)(Aluminium)	-	9500	-
4.1, Table 1of IS:740 (Designation 55000)(Cr+Mn)	-	9500	-
4.1, Table 1of IS:740 (Designation 55000)(Chromium)	-	9500	-
4.1, Table 1of IS:740 (Designation 55000)(Titanium and or other grain refining elements)	-	9500	-
4.1, Table 1of IS:740 (Designation 55000)(Zinc)	-	9500	-
4.1, Table 1of IS:740 (Designation 55000)(Manganese)	-	9500	-
4.1, Table 1of IS:740 (Designation 55000)(Iron)	-	9500	-
4.1, Table 1of IS:740 (Designation 55000)(Silicon)	-	9500	-
4.1, Table 1of IS:740 (Designation 55000)(Magnesium)	-	9500	-
4.1, Table 1of IS:740 (Designation 55000)(Copper)	-	9500	-
4.1, Table 1of IS:740 (Designation 53000)(Aluminium)	-	9500	-
4.1, Table 1of IS:740 (Designation 53000)(Cr+Mn)	-	9500	-
4.1, Table 1of IS:740 (Designation 53000)(Chromium)	-	9500	-
4.1, Table 1of IS:740 (Designation 53000)(Titanium and or other grain refining elements)	-	9500	-
4.1, Table 1of IS:740 (Designation 53000)(Zinc)	-	9500	-
4.1, Table 1of IS:740 (Designation 53000)(Manganese)	-	9500	-
4.1, Table 1of IS:740 (Designation 53000)(Iron)	-	9500	-
4.1, Table 1of IS:740 (Designation 53000)(Silicon)	-	9500	-
4.1, Table 1of IS:740 (Designation 53000)(Magnesium)	-	9500	-
4.1, Table 1of IS:740 (Designation 53000)(Copper)	-	9500	-
4.1, Table 1of IS:740 (Designation 24345)(Aluminium)	-	9500	-
4.1, Table 1of IS:740 (Designation 24345)(Chromium)	-	9500	-
4.1, Table 1of IS:740 (Designation 24345)(Titanium and or other grain refining elements)	-	9500	-
4.1, Table 1of IS:740 (Designation 24345)(Zinc)	-	9500	-
4.1, Table 1of IS:740 (Designation 24345)(Manganese)	-	9500	-
4.1, Table 1of IS:740 (Designation 24345)(Iron)	-	9500	-
4.1, Table 1of IS:740 (Designation 24345)(Silicon)	-	9500	-
4.1, Table 1of IS:740 (Designation 24345)(Magnesium)	-	9500	-
4.1, Table 1of IS:740 (Designation 24345)(Copper)	-	9500	-
4.1, Table 1of IS:740 (Designation 19000)(Cu+Mg+Si+Fe+Mn+Zn)	-	9500	-
4.1, Table 1of IS:740 (Designation 19000)(Aluminium)	-	9500	-
4.1, Table 1of IS:740 (Designation 19000)(Zinc)	-	9500	-
4.1, Table 1of IS:740 (Designation 19000)(Manganese)	-	9500	-
4.1, Table 1of IS:740 (Designation 19000)(Iron)	-	9500	-
4.1, Table 1of IS:740 (Designation 19000)(Silicon)	-	9500	-
4.1, Table 1of IS:740 (Designation 19000)(Magnesium)	-	9500	-
4.1, Table 1of IS:740 (Designation 19000)(Copper)	-	9500	-
6(Freedom From Defects)	-	9500	-
7(Dmension And Tolerances)	-	9500	-
9.2(Head Forming Test)	-	9500	-
11(Marking)	-	9500	-

27 May, 2028

-
included w.e.f 27.01.2026

IS 738 (1994)

Wrought aluminium alloys, drawn tube for general engineering purposes - Specification (Third Revision)

All

9000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 6(Freedom from Defects- Cl.6)	-	500	-
Cl.7, IS 2678(Wall Thickness at any point)	-	500	-
Cl.7, IS 2678(Mean Wall Thickness)	-	500	-
Cl.7, IS 2678(Straightness)	-	500	-
Cl. 9.1 Table 2(0.2 percent proof stress- IS 2657)	-	1000	-
Cl. 9.1 Table 2(Tensile Strength- IS 2657)	-	1000	-
Cl. 9.1 Table 2(Elongation on guage length of 50 mm)	-	1000	-
Cl. 9.1.2(Flattening Test- IS 2328)	-	1000	-
Cl. 8.1, Table 1(Aluminium- IS 504 : 1963 or 1S 11085 : 1984 or any other established instrumental/chemical method. )	-	1000	-
Cl. 8.1, Table 1(Copper- IS 504 : 1963 or 1S 11085 : 1984 or any other established instrumental/chemical method. )	-	1000	-
Cl. 8.1, Table 1(Magnesium- IS 504 : 1963 or 1S 11085 : 1984 or any other established instrumental/chemical method. )	-	1000	-
Cl. 8.1, Table 1(Silicon- IS 504 : 1963 or 1S 11085 : 1984 or any other established instrumental/chemical method. )	-	1000	-
Cl. 8.1, Table 1(Iron- IS 504 : 1963 or 1S 11085 : 1984 or any other established instrumental/chemical method. )	-	1000	-
Cl. 8.1, Table 1(Manganese- IS 504 : 1963 or 1S 11085 : 1984 or any other established instrumental/chemical method. )	-	1000	-
Cl. 8.1, Table 1(Zinc- IS 504 : 1963 or 1S 11085 : 1984 or any other established instrumental/chemical method. )	-	1000	-
Cl. 8.1, Table 1(Titanium- IS 504 : 1963 or 1S 11085 : 1984 or any other established instrumental/chemical method. )	-	1000	-
Cl. 8.1, Table 1(Chromium- IS 504 : 1963 or 1S 11085 : 1984 or any other established instrumental/chemical method. )	-	1000	-
Cl. 8.1, Table 1(Ti+ V (Remarks)- IS 504 : 1963 or 1S 11085 : 1984 or any other established instrumental/chemical method. )	-	1000	-
Cl. 8.1, Table 2(T. I.(Remarks)- IS 504 : 1963 or 1S 11085 : 1984 or any other established instrumental/chemical method. )	-	1000	-
Cl. 8.1, Table 3(Ti+ Cr (Remarks)- IS 504 : 1963 or 1S 11085 : 1984 or any other established instrumental/chemical method. )	-	1000	-
Cl. 8.1, Table 4(Cr+ Mn (Remarks)- IS 504 : 1963 or 1S 11085 : 1984 or any other established instrumental/chemical method. )	-	1000	-
10(Marking)	-	1000	-

27 May, 2028

-
included w.e.f 22.01.2026

IS 6911 (2017)

Stainless steel plate, sheet and strip - Specification (Second Revision)

ALL

18500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 7.1 & 7.2 Table 1(Carbon -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	-
Cl. 7.1 & 7.2 Table 1(Silicon -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	-
Cl. 7.1 & 7.2 Table 1(Manganese -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	-
Cl. 7.1 & 7.2 Table 1(Nickel -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	-
Cl. 7.1 & 7.2 Table 1(Chromium -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	-
Cl. 7.1 & 7.2 Table 1(Molybdenum -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	-
Cl. 7.1 & 7.2 Table 1(Sulphur -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	-
Cl. 7.1 & 7.2 Table 1(Phosphorus -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	-
Cl. 7.1 & 7.2 Table 1(Nitrogen -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	-
Cl. 7.1 & 7.2 Table 1(Copper -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	-
Cl. 7.1 & 7.2 Table 1(Others-IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	-
Cl. 7.1 & 7.2 Table 1(Titanium-IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	-
Cl. 7.1 & 7.2 Table 1(Niobium-IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	-
Cl.12(Corrosion Resistance- IS 10461(Part1))	-	1000	-
Cl.12(Corrosion Resistance- IS 10461(Part2))	-	1000	-
6(Freedom from defects , IS 6911)	-	1000	-
10.1,Table 4&Table 6(Tensile Test - IS 1608(Pt -1))	-	1000	-
10.2,Table 4&Table 5(Hardness Test- IS 1500(Pt -1),IS 1501 (Pt-1),IS 1586 (Pt -1))	-	1000	-
10.3(Bend Test - IS 1599)	-	1000	-
11,Table 7(Erichsen cupping test-IS 10175)	-	1000	-
15(Surface Finish)	-	1000	-
17(Dimension and tolerance)	-	1000	-
10.1 Amd 2(Yeild Strength)	-	1000	-
10.1 Amd 2(0.2 Percent Proof Stress)	-	1000	-
10.1 Amd 2(Elongation)	-	1000	-
Clause 17 , Table 9 to Table 19(Dimension (Length))	-	1000	-
Clause 17 , Table 9 to Table 19(Dimension (Width))	-	1000	-
Clause 17 , Table 9 to Table 19(Dimension (Thickness))	-	1000	-
Clause 17 , Table 9 to Table 19(Flatness)	-	1000	-
Clause 17 , Table 9 to Table 19(Camber)	-	1000	-
Table 1(Any Instrumental Method/Chemical Method)	-	1000	-
Table 1, Amendment 2(Any Instrumental Method/Chemical Method)	-	1000	-
Table 1, Amendment 2(Any Instrumental Method/Chemical Method)	-	1000	-
Table 1, Amendment 2(Any Instrumental Method/Chemical Method)	-	1000	-
Table 1, Amendment 2(Any Instrumental Method/Chemical Method)	-	1000	-
Table 1, Amendment 2(Any Instrumental Method/Chemical Method)	-	1000	-
10.1 Amd 2(Yeild Strength)	-	1000	-
10.1 Amd 2(0.2 Percent Proof Stress)	-	1000	-
10.1 Amd 2(Elongation)	-	1000	-
Clause 17 , Table 9 to Table 19(Dimension (Length))	-	1000	-
Clause 17 , Table 9 to Table 19(Dimension (Width))	-	1000	-
Clause 17 , Table 9 to Table 19(Dimension (Thickness))	-	1000	-
Clause 17 , Table 9 to Table 19(Flatness)	-	1000	-
Clause 17 , Table 9 to Table 19(Camber)	-	1000	-
Table 1(Any Instrumental Method/Chemical Method)	-	1000	-
Table 1, Amendment 2(Any Instrumental Method/Chemical Method)	-	1000	-
Table 1, Amendment 2(Any Instrumental Method/Chemical Method)	-	1000	-
Table 1, Amendment 2(Any Instrumental Method/Chemical Method)	-	1000	-
Table 1, Amendment 2(Any Instrumental Method/Chemical Method)	-	1000	-
Table 1, Amendment 2(Any Instrumental Method/Chemical Method)	-	1000	-
10.1 Amd 2(Yeild Strength)	-	1000	-
10.1 Amd 2(0.2 Percent Proof Stress)	-	1000	-
10.1 Amd 2(Elongation)	-	1000	-
Clause 17 , Table 9 to Table 19(Dimension (Length))	-	1000	-
Clause 17 , Table 9 to Table 19(Dimension (Width))	-	1000	-
10.1 Amd 2(Yeild Strength)	-	1000	-
10.1 Amd 2(0.2 Percent Proof Stress)	-	1000	-
10.1 Amd 2(Yeild Strength)	-	1000	-
10.1 Amd 2(0.2 Percent Proof Stress)	-	1000	-
10.1 Amd 2(Elongation)	-	1000	-
Clause 17 , Table 9 to Table 19(Dimension (Length))	-	1000	-
Clause 17 , Table 9 to Table 19(Dimension (Width))	-	1000	-
Clause 17 , Table 9 to Table 19(Dimension (Thickness))	-	1000	-
Clause 17 , Table 9 to Table 19(Flatness)	-	1000	-
Clause 17 , Table 9 to Table 19(Camber)	-	1000	-
Table 1(Any Instrumental Method/Chemical Method)	-	1000	-
Table 1, Amendment 2(Any Instrumental Method/Chemical Method)	-	1000	-
Table 1, Amendment 2(Any Instrumental Method/Chemical Method)	-	1000	-
Table 1, Amendment 2(Any Instrumental Method/Chemical Method)	-	1000	-
Table 1, Amendment 2(Any Instrumental Method/Chemical Method)	-	1000	-
Table 1, Amendment 2(Any Instrumental Method/Chemical Method)	-	1000	-
Table 1, Amendment 2(Any Instrumental Method/Chemical Method)	-	1000	-
4(Supply of Material)	-	1000	-
8(Heat Treatment)	-	1000	-
19(Marking)	-	1000	-
5(Manufacture)	-	1000	-
10.1 Amd 2(Yeild Strength)	-	1000	-
10.1 Amd 2(0.2 Percent Proof Stress)	-	1000	-
10.1 Amd 2(Elongation)	-	1000	-
Clause 17 , Table 9 to Table 19(Dimension (Length))	-	1000	-
Clause 17 , Table 9 to Table 19(Dimension (Width))	-	1000	-
Clause 17 , Table 9 to Table 19(Dimension (Thickness))	-	1000	-
Clause 17 , Table 9 to Table 19(Flatness)	-	1000	-
Clause 17 , Table 9 to Table 19(Camber)	-	1000	-
Table 1(Alumium)	-	1000	-
Table 1, Amendment 2(Zirconium)	-	1000	-
Table 1, Amendment 2(Tungstun)	-	1000	-
Table 1, Amendment 2(Tungstun)	-	1000	-
Table 1, Amendment 2(Ce)	-	1000	-
Table 1, Amendment 2(Cobalt)	-	1000	-
Table 1, Amendment 2(Ta)	-	1000	-
5.1 - 1(Carbon)	-	1000	-
5.1 - 1(Sulphur)	-	1000	-
5.1 - 1(Phosphorus)	-	1000	-
5.1 - 1(Manganese)	-	1000	-
5.1 - 1(Silicon)	-	1000	-
5.1 - 1(Nitrogen)	-	1000	-
5.1 - 1(Copper)	-	1000	-
5.1 - 1(Titanium)	-	1000	-
5.1 - 1(Aluminium)	-	1000	-
5.1 - 1(Niobium)	-	1000	-
5.1 - 1(Nickel)	-	1000	-
5.1 - 1(Chromium)	-	1000	-
5.1 - 1(Molybdenum)	-	1000	-
6(Freedom from defect)	-	1000	-
10.1 - 4(Tensile Test)	-	1000	-
10.1 - 4(Yield strength)	-	1000	-
10.1 - 4(Elongation % on 50mm)	-	1000	-
10.2(Hardness Test)	-	1000	-
10.3(Bend Test)	-	1000	-
11(Erichsen Cupping Test)	-	1000	-
17(Dimension and tolerance)	-	1000	-
12(Corrosion resistance)	-	1000	-
5.1 - 1(Carbon)	-	1000	-
5.1 - 1(Sulphur)	-	1000	-
5.1 - 1(Phosphorus)	-	1000	-
5.1 - 1(Manganese)	-	1000	-
5.1 - 1(Silicon)	-	1000	-
5.1 - 1(Nitrogen)	-	1000	-
5.1 - 1(Copper)	-	1000	-
5.1 - 1(Titanium)	-	1000	-
5.1 - 1(Aluminium)	-	1000	-
5.1 - 1(Niobium)	-	1000	-
5.1 - 1(Nickel)	-	1000	-
5.1 - 1(Chromium)	-	1000	-
5.1 - 1(Molybdenum)	-	1000	-
6(Freedom from defect)	-	1000	-
10.1 - 4(Tensile Test)	-	1000	-
10.1 - 4(Yield strength)	-	1000	-
10.1 - 4(Elongation % on 50mm)	-	1000	-
10.2(Hardness Test)	-	1000	-
10.3(Bend Test)	-	1000	-
11(Erichsen Cupping Test)	-	1000	-
17(Dimension and tolerance)	-	1000	-
12(Corrosion resistance)	-	1000	-

27 May, 2028

-
included w.e.f 22.01.2026

IS 15834 (2020)

Stainless Steel Sliding Door Bolts ( Aldrops ) for Use With Padlocks - Specification ( First Revision )

ALL

11500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 5(DIMENSIONS AND TOLERANCES)	-	1000	-
Cl 5(DIMENSIONS AND TOLERANCES)	-	1000	-
Cl 5(DIMENSIONS AND TOLERANCES)	-	1000	-
Cl 5(DIMENSIONS AND TOLERANCES)	-	1000	-
Cl 5(DIMENSIONS AND TOLERANCES)	-	1000	-
Cl 5(DIMENSIONS AND TOLERANCES)	-	1000	-
Cl 5(DIMENSIONS AND TOLERANCES)	-	1000	-
Cl 5(DIMENSIONS AND TOLERANCES)	-	1000	-
Cl 5(DIMENSIONS AND TOLERANCES)	-	1000	-
Cl 5(DIMENSIONS AND TOLERANCES)	-	1000	-
Cl 5(DIMENSIONS AND TOLERANCES)	-	1000	-
Cl 5(DIMENSIONS AND TOLERANCES)	-	1000	-
Cl 5(DIMENSIONS AND TOLERANCES)	-	1000	-
Cl 5(DIMENSIONS AND TOLERANCES)	-	1000	-
Cl 5(DIMENSIONS AND TOLERANCES)	-	1000	-
Cl 5(DIMENSIONS AND TOLERANCES)	-	1000	-
Cl 5(DIMENSIONS AND TOLERANCES)	-	1000	-
Cl 5(DIMENSIONS AND TOLERANCES)	-	1000	-
Cl 5(DIMENSIONS AND TOLERANCES)	-	1000	-
Cl 5(DIMENSIONS AND TOLERANCES)	-	1000	-
Cl 6(MANUFACTURE)	-	1000	-
Cl 7(FINISH)	-	1000	-
5(DIMENSIONS AND TOLERANCES)	-	1000	-
5(DIMENSIONS AND TOLERANCES)	-	1000	-
5(DIMENSIONS AND TOLERANCES)	-	1000	-
5(DIMENSIONS AND TOLERANCES)	-	1000	-
5(DIMENSIONS AND TOLERANCES)	-	1000	-
5(DIMENSIONS AND TOLERANCES)	-	1000	-
5(DIMENSIONS AND TOLERANCES)	-	1000	-
5(DIMENSIONS AND TOLERANCES)	-	100	-
5(DIMENSIONS AND TOLERANCES)	-	1000	-
5(DIMENSIONS AND TOLERANCES)	-	1000	-
5(DIMENSIONS AND TOLERANCES)	-	1000	-
5(DIMENSIONS AND TOLERANCES)	-	1000	-
5(DIMENSIONS AND TOLERANCES)	-	1000	-
5(DIMENSIONS AND TOLERANCES)	-	1000	-
5(DIMENSIONS AND TOLERANCES)	-	1000	-
5(DIMENSIONS AND TOLERANCES)	-	1000	-
5(DIMENSIONS AND TOLERANCES)	-	1000	-
5(DIMENSIONS AND TOLERANCES)	-	1000	-
5(DIMENSIONS AND TOLERANCES)	-	1000	-
5(DIMENSIONS AND TOLERANCES)	-	1000	-
6(MANUFACTURE)	-	1000	-
7(FINISH)	-	1000	-
8(Marking)	-	1000	-
8(Marking)	-	1000	-
Cl.4(Carbon)	-	5000	-
Cl.4(Sulphur)	-	5000	-
Cl.4(Phosphorus)	-	5000	-
Cl.4(Manganese)	-	5000	-
Cl.4(Silicon)	-	5000	-
Cl.4(Nickel)	-	5000	-
Cl.4(Chromium)	-	5000	-
Cl.4(Copper)	-	5000	-
Cl.4(Molybdenum)	-	5000	-
Cl.4(Nitrogen)	-	5000	-
Cl.4(Titanium)	-	5000	-
Cl.4(Niobium)	-	5000	-
Sub-Clause. 10.3.1(Dimension)	-	1000	-
Sub-Clause. 10.3.2(Tensile test)	-	2000	-
Sub-Clause. 10.3.3(corrosion resistance)	-	2500	-

27 May, 2028

-
included w.e.f 22.01.2026

IS 15961 (2025)

Hot Dip Aluminium-Zinc Alloy Metallic Coated Steel Strip and Sheet - Specification (First Revision)

9800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-3.5(Surface Finish)	-	9800	-
Cl-4(Supply of Material - General requirements)	-	9800	-
Cl-5(Manufacture)	-	9800	-
Cl-7(C)	-	9800	-
Cl-7(Mn)	-	9800	-
Cl-7(S)	-	9800	-
Cl-7(P)	-	9800	-
Cl-7(Total aluminium)	-	9800	-
Cl-7(silicon)	-	9800	-
Cl-7(Nitrogen)	-	9800	-
Cl-7(Chromium,)	-	9800	-
Cl-7(Nickel,)	-	9800	-
Cl-7(Niobium,)	-	9800	-
Cl-7(Vanadium,)	-	9800	-
Cl-7(Titanium,)	-	9800	-
Cl-7(Molybdenum,)	-	9800	-
Cl-7(Boron,)	-	9800	-
Cl-7(Calcium)	-	9800	-
Cl-7(others,)	-	9800	-
Cl-7(Phosphorus)	-	9800	-
Cl-8.1(Test Piece)	-	9800	-
Cl-8.2(Testing Frequency)	-	9800	-
Cl-8.3, Table-1(Yield Strength)	-	9800	-
Cl-8.3, Table-1(Tensile Strength)	-	9800	-
Cl-8.3, Table-1(Elongation,)	-	9800	-
Cl-9(Coating Test)	-	9800	-
Cl-9.1, Table-2(Minimum Coating Mass (Total Both Surfaces)- Triple Spot)	-	9800	-
Cl-9.1, Table-2(Minimum Coating Mass (Total Both Surfaces)- Single Spot)	-	9800	-
Cl-9.1, Table-2(Minimum Coating Mass (One Surface) -Single Spot)	-	9800	-
Cl-9.4(Single Spot Coating Mass)	-	9800	-
Cl-9.5(Triple Spot Coating Mass)	-	9800	-
Cl-9.6(Differential Coating)	-	9800	-
Cl-10(Coating Adhesion Test)	-	9800	-
Cl-11(Freedom From Defects)	-	9800	-
Cl-12(Mass)	-	9800	-
Cl-13.1(Coil Internal Diameter)	-	9800	-
Cl-13.2(Length Tolerance)	-	9800	-
Cl-13.3(Width Tolerance)	-	9800	-
Cl-13.4(Thickness Tolerance)	-	9800	-
Cl-13.5(Camber)	-	9800	-
Cl-13.6(Deviation from Squareness (Out-of Square))	-	9800	-
Cl-13.7(Deviation from Flatness (Steepness))	-	9800	-
Cl-13.8(Profiled Sheets)	-	9800	-
Cl-16(Marking)	-	9800	-
Cl-3.5(Surface Finish)	-	9800	-
Cl-4(Supply of Material - General requirements)	-	9800	-
Cl-5(Manufacture)	-	9800	-
Cl-7(C)	-	9800	-
Cl-7(Mn)	-	9800	-
Cl-7(S)	-	9800	-
Cl-7(P)	-	9800	-
Cl-7(Total aluminium)	-	9800	-
Cl-7(silicon)	-	9800	-
Cl-7(Nitrogen)	-	9800	-
Cl-7(Chromium,)	-	9800	-
Cl-7(Nickel,)	-	9800	-
Cl-7(Niobium,)	-	9800	-
Cl-7(Vanadium,)	-	9800	-
Cl-7(Titanium,)	-	9800	-
Cl-7(Molybdenum,)	-	9800	-
Cl-7(Boron,)	-	9800	-
Cl-7(Calcium)	-	9800	-
Cl-7(others,)	-	9800	-
Cl-7(Phosphorus)	-	9800	-
Cl-8.1(Test Piece)	-	9800	-
Cl-8.2(Testing Frequency)	-	9800	-
Cl-8.3, Table-1(Yield Strength)	-	9800	-
Cl-8.3, Table-1(Tensile Strength)	-	9800	-
Cl-8.3, Table-1(Elongation,)	-	9800	-
Cl-9(Coating Test)	-	9800	-
Cl-9.1, Table-2(Minimum Coating Mass (Total Both Surfaces)- Triple Spot)	-	9800	-
Cl-9.1, Table-2(Minimum Coating Mass (Total Both Surfaces)- Single Spot)	-	9800	-
Cl-9.1, Table-2(Minimum Coating Mass (One Surface) -Single Spot)	-	9800	-
Cl-9.4(Single Spot Coating Mass)	-	9800	-
Cl-9.5(Triple Spot Coating Mass)	-	9800	-
Cl-9.6(Differential Coating)	-	9800	-
Cl-10(Coating Adhesion Test)	-	9800	-
Cl-11(Freedom From Defects)	-	9800	-
Cl-12(Mass)	-	9800	-
Cl-13.1(Coil Internal Diameter)	-	9800	-
Cl-13.2(Length Tolerance)	-	9800	-
Cl-13.3(Width Tolerance)	-	9800	-
Cl-13.4(Thickness Tolerance)	-	9800	-
Cl-13.5(Camber)	-	9800	-
Cl-13.6(Deviation from Squareness (Out-of Square))	-	9800	-
Cl-13.7(Deviation from Flatness (Steepness))	-	9800	-
Cl-13.8(Profiled Sheets)	-	9800	-
Cl-16(Marking)	-	9800	-
Cl-3.5(Surface Finish)	-	9800	-
Cl-4(Supply of Material - General requirements)	-	9800	-
Cl-5(Manufacture)	-	9800	-
Cl-7(C)	-	9800	-
Cl-7(Mn)	-	9800	-
Cl-7(S)	-	9800	-
Cl-7(P)	-	9800	-
Cl-7(Total aluminium)	-	9800	-
Cl-7(silicon)	-	9800	-
Cl-7(Nitrogen)	-	9800	-
Cl-7(Chromium,)	-	9800	-
Cl-7(Nickel,)	-	9800	-
Cl-7(Niobium,)	-	9800	-
Cl-7(Vanadium,)	-	9800	-
Cl-7(Titanium,)	-	9800	-
Cl-7(Molybdenum,)	-	9800	-
Cl-7(Boron,)	-	9800	-
Cl-7(Calcium)	-	9800	-
Cl-7(others,)	-	9800	-
Cl-7(Phosphorus)	-	9800	-
Cl-8.1(Test Piece)	-	9800	-
Cl-8.2(Testing Frequency)	-	9800	-
Cl-8.3, Table-1(Yield Strength)	-	9800	-
Cl-8.3, Table-1(Tensile Strength)	-	9800	-
Cl-8.3, Table-1(Elongation,)	-	9800	-
Cl-9(Coating Test)	-	9800	-
Cl-9.1, Table-2(Minimum Coating Mass (Total Both Surfaces)- Triple Spot)	-	9800	-
Cl-9.1, Table-2(Minimum Coating Mass (Total Both Surfaces)- Single Spot)	-	9800	-
Cl-9.1, Table-2(Minimum Coating Mass (One Surface) -Single Spot)	-	9800	-
Cl-9.4(Single Spot Coating Mass)	-	9800	-
Cl-9.5(Triple Spot Coating Mass)	-	9800	-
Cl-9.6(Differential Coating)	-	9800	-
Cl-10(Coating Adhesion Test)	-	9800	-
Cl-11(Freedom From Defects)	-	9800	-
Cl-12(Mass)	-	9800	-
Cl-13.1(Coil Internal Diameter)	-	9800	-
Cl-13.2(Length Tolerance)	-	9800	-
Cl-13.3(Width Tolerance)	-	9800	-
Cl-13.4(Thickness Tolerance)	-	9800	-
Cl-13.5(Camber)	-	9800	-
Cl-13.6(Deviation from Squareness (Out-of Square))	-	9800	-
Cl-13.7(Deviation from Flatness (Steepness))	-	9800	-
Cl-13.8(Profiled Sheets)	-	9800	-
Cl-16(Marking)	-	9800	-
Cl.6 Table 3 of IS 513(part 2) :2016(micro alloy)	-	9800	-

27 May, 2028

-
Included w.e.f. 01.04.2026

IS 11513 (2017)

Hot rolled carbon steel strip for cold rolling purposes - Specification (Second Revision)

All

9800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 8(Workmanship)	-	500	-
Cl 9(Length, Width, Thickness, Crown, Edge Camber & Difference in Thickness Across Width )	-	1500	-
Cl 8(Workmanship)	-	500	-
Cl 9(Length, Width, Thickness, Crown, Edge Camber & Difference in Thickness Across Width )	-	1500	-
Cl 8(Workmanship)	-	500	-
Cl 9(Length, Width, Thickness, Crown, Edge Camber & Difference in Thickness Across Width )	-	1500	-
6.1(Carbon %)	-	1000	-
6.1(Manganese %)	-	1000	-
6.1(Phosphorus %)	-	1000	-
6.1(Sulphur %)	-	1000	-
6.1(Silicon %)	-	1000	-
6.1( Copper %)	-	1000	-
6.1( Aluminium %)	-	1000	-
6.1( Nb)	-	1000	-
6.1(V)	-	1000	-
6.1( Ti)	-	1000	-
6.1(Boron)	-	1000	-
6.1( Nitrogen%)	-	1000	-
6.1(Microalloying)	-	1000	-
6.1(Carbon %)	-	1000	-
6.1(Manganese %)	-	1000	-
6.1(Phosphorus %)	-	1000	-
6.1(Sulphur %)	-	1000	-
6.1(Silicon %)	-	1000	-
6.1( Copper %)	-	1000	-
6.1( Aluminium %)	-	1000	-
6.1( Nb)	-	1000	-
6.1(V)	-	1000	-
6.1( Ti)	-	1000	-
6.1(Boron)	-	1000	-
6.1( Nitrogen%)	-	1000	-
6.1(Microalloying)	-	1000	-
6.1(Carbon %)	-	1000	-
6.1(Manganese %)	-	1000	-
6.1(Phosphorus %)	-	1000	-
6.1(Sulphur %)	-	1000	-
6.1(Silicon %)	-	1000	-
6.1( Copper %)	-	1000	-
6.1( Aluminium %)	-	1000	-
6.1( Nb)	-	1000	-
6.1(V)	-	1000	-
6.1( Ti)	-	1000	-
6.1(Boron)	-	1000	-
6.1( Nitrogen%)	-	1000	-
6.1(Microalloying)	-	1000	-
Cl. 10(Weight)	-	300	-
Cl. 9.3(Crown)	-	300	-
Cl.9.3.1(Difference in Thickness)	-	300	-
Cl. 9.5(Edge Camber)	-	300	-
Cl.9(Thickness)	-	300	-
Cl.9(Width)	-	300	-
Cl 9(Length, Width, Thickness, Crown, Edge Camber & Difference in Thickness Across Width )	-	1500	-
Cl 8(Workmanship)	-	500	-
Cl 8(Workmanship)	-	500	-
Cl 9(Length, Width, Thickness, Crown, Edge Camber & Difference in Thickness Across Width)	-	1500	-
12(Marking)	-	500	-

27 May, 2028

-
included w.e.f 22.01.2026

IS 1029 (1970)

Specification for hot-rolled steel strip (Baling) (First Revision)

All Type

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.4(Sulphur -IS 228 or method specified in relevant ISO standard)	-	2000	-
Cl.4(Phosphorus -IS 228 or method specified in relevant ISO standard)	-	2000	-
5.2(Tensile Test-1608:Part 1)	-	2000	-
5.2(Tensile Strength, Mpa)	-	2000	-
5.2(Elongation, %)	-	1000	-
5.3(Bend Test-1599)	-	1000	-
7.1(Freedom from defects)	-	1000	-
8.2(Width)	-	1000	-
8.2(Thickness)	-	1000	-
9.1(Finishing & Packing)	-	1000	-
10(Marking)	-	1000	-

27 May, 2028

-
included w.e.f 27.01.2026

IS 1554 : Part 1 (1988)

Specification for pvc insulated (Heavy Duty) electric cables: Part 1 for working voltages up to and including 1100 v (Third Revision)

ALL

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(MATERIALS : CONDUCTOR)	-	300	-
4.1.1(INSULATION : General Purjose Insulaiion)	-	300	-
4.1.2(INSULATION : Heat Resisting Insulation)	-	300	-
5.1(MATERIALS : FILLER AND INNER SHEATH)	-	300	-
5.2(MATERIALS : FILLER AND INNER SHEATH)	-	300	-
6.1(MATERIALS : ARMGURING)	-	300	-
6.2(MATERIALS : ARMGURING)	-	300	-
7.1.1(OUTER SHEATH : For Cables with General Purpose InsuIafion)	-	500	-
7.1.2(OUTER SHEATH : For Cables with Heat Resisting InsuIalion)	-	500	-
8.1(CONSTRUCTION : CONDUCTOR)	-	500	-
8.2(CONSTRUCTION : CONDUCTOR)	-	500	-
9.1(INSULATION )	-	500	-
9.2(INSULATION : Thickness of Insulation)	-	300	-
9.3(INSULATION :Tolerance on Thickness of Insulation)	-	300	-
9.4(INSULATION : Application of Insulation)	-	500	-
10.1(CORE IDENTIFICATION)	-	500	-
10.2(CORE IDENTIFICATION)	-	500	-
10.3(CORE IDENTIFICATION)	-	500	-
10.3.1(Arrangement of Marking)	-	1000	-
11.1(LAYING UP OF CORES)	-	1000	-
11.2(LAYING UP OF CORES)	-	1000	-
12.1(INNER SHEATH)	-	1000	-
12.2(INNER SHEATH)	-	1000	-
12.3(INNER SHEATH :Thickness of Inner Sheath)	-	500	-
12.3.1(INNER SHEATH :Thickness of Inner Sheath)	-	500	-
13.1.1(ARMOURING : Application)	-	500	-
13.1.2(Armouring: Coverage )	-	500	-
13.1.3(ARMOURING : Direction of lay )	-	500	-
13.1.4(ARMOURING : Application)	-	1000	-
13.2(ARMOURING : Type of Armour)	-	1000	-
13.2.1(ARMOURING : Type of Armour)	-	1000	-
13.3(Armouring : Dimensions -Wire Diameter)	-	500	-
13.3(Armouring : Dimensions -Formed wire )	-	500	-
13.4(ARMOURING : Joints)	-	500	-
13.5.1(ARMOURING : Resistance)	-	1000	-
13.5.2(ARMOURING : Resistance)	-	1000	-
13.6 a)(ARMOURING: Tensile Strength)	-	1000	-
13.6 b)(ARMOURING: Elongation )	-	1000	-
13.6 c)(ARMOURING: Torsion Test (For round wire ) )	-	1000	-
13.6 d)(ARMOURING: Winding Test(For formed wire))	-	1000	-
13.6 e)(ARMOURING: Uniformity of zinc coating)	-	1000	-
13.6 f)(ARMOURING: Mass of zinc coating )	-	500	-
13.6 g)(ARMOURING: Resistivity)	-	800	-
14.1(OUTER SHEATH)	-	1000	-
14.2(OUTER SHEATH)	-	1000	-
14.3(OUTER SHEATH : Colour )	-	1000	-
14.4.1(Thickness of Outer Sheath : Unarmowed Cables)	-	500	-
14.4.2(Thickness of Outer Sheath : Armoured Cables)	-	500	-
15.1 a) 1)(Tests on conductor : Annealing test ( for copper ))	-	500	-
15.1 a) 2)(Tensile test (for aluminium) - Before stranding )	-	1000	-
15.1 a) 2)(Tensile test (for aluminium) - After stranding )	-	1000	-
15.1 a) 3)(Tests on conductor : Wrapping test ( for aluminium ))	-	1000	-
15.1 a) 4)(Tests on conductor : Conductor resistance test)	-	1000	-
15.1 a) 4)(Resistance test - Neutral conductor )	-	1000	-
15.1 d)1)(Phyaical tests for insulation : Tensile Test)	-	1000	-
15.1 d)1)(Phyaical tests for insulation : Elongation )	-	1000	-
15.1 d)1)(Physical tests for sheath : Tensile stregth )	-	1000	-
15.1 d)1)(Physical tests for sheath : Elongation )	-	1000	-
15.1 d)2)(Phyaical tests for insulation- Ageing in air Oven : Tensile Test)	-	1000	-
15.1 d)2)(Phyaical tests for insulation - Ageing in air oven : Elongation )	-	1000	-
15.1 d)2)(Phyaical tests for insulation - Ageing in air Oven : Tensile Variation )	-	1000	-
15.1 d)2)(Phyaical tests for insulation- Ageing in air oven : Elongation Variation )	-	1000	-
15.1 d)2)(Physical tests for outer sheath- Ageing in air oven : Tensile stregth )	-	1000	-
15.1 d)2)(Physical tests for outer sheath -Ageing in air oven : Elongation )	-	1000	-
15.1 d)2)(Physical tests for outer sheath- Ageing in air oven : Tensile stregth Variation )	-	1000	-
15.1 d)2)(Physical tests for outer sheath -Ageing in air oven : Elongation Variation )	-	1000	-
15.1 d)3)(Phyaical tests for insulation : Shrinkage )	-	1000	-
15.1 d)3)(Phyaical tests for insulation : Shrinkage - Crack observed )	-	1000	-
15.1 d)3)(Phyaical tests for Sheath : Shrinkage )	-	1000	-
15.1 d)3)(Phyaical tests for Sheath : Shrinkage - Crack observed )	-	1000	-
15.1 d)4)(Hot deformation : Insulation )	-	1000	-
15.1 d)4)(Hot deformation : Sheath )	-	1000	-
15.1 d)5)( Loss of mass in air oven- Insulation )	-	1000	-
15.1 d)5)( Loss of mass in air oven- sheath )	-	1000	-
15.1 d)6)(Heat shock test- Insulation )	-	1000	-
15.1 d)6)(Heat shock test- sheath )	-	1000	-
15.1 d)7)(Thermal stability- insulation )	-	1200	-
15.1 d)7)(Thermal stability- Sheath )	-	1200	-
15.1 e)(Insulation resistance test : Volume Resistivity )	-	1200	-
15.1 e)(Insulation resistance test : IR Constant )	-	1200	-
15.1 f)(High voltage test ( water immersion test ))	-	1200	-
15.1 g)(High voltage test at room temperature)	-	1200	-
15.1 g)(High voltage test at room temperature)	-	1200	-
15.4 a)(Cold bend test- Insulation ( Optional test))	-	1200	-
15.4 a)(Cold bend test- Sheath ( Optional test))	-	1200	-
15.4 b)(Cold impact test- Insulation ( Optional test))	-	1200	-
15.4 b)(Cold impact test- Sheath ( Optional test))	-	1200	-
15.4 c)(Armour resistance test ( for other than mining cables ).- Optional test )	-	1200	-
16.1(DETAILS OF TESTS : General)	-	1200	-
16.2(DETAILS OF TESTS : High Voltage Test at Room Temperature)	-	1200	-
16.3.1(High Voltage Test ( Water Immersion Test ) : a.c. Test)	-	1200	-
16.3.2(High Voltage Test ( Water Immersion Test ) : d.c. Test)	-	1200	-
16.4(Flammability Test)	-	1200	-
16.5(Oxygen Index Test)	-	1200	-
16.6(Flame Retardance Test on Single Cables)	-	1200	-
16.7(Flame Retardance Test on Bunched Cables)	-	1200	-
16.9(Test for Halogen Acid Gas Evolution)	-	1200	-
16.1(Temperature Index)	-	1200	-
17.1(IDENTIFICATION : Manufacturer’s Identification)	-	1200	-
17.2(IDENTIFICATION : Cable Identification)	-	500	-
17.2.1(IDENTIFICATION : Cable Identification)	-	500	-
17.3(IDENTIFICATION : Cable Code)	-	500	-
15.1.e(Insulation resistance Test- Insulation resistance At Maximum rated temperature temperature)	-	500	-
15.1.e(Insulation resistance Test- Insulation resistance constant At Room temperature)	-	500	-
15.1.e(Insulation resistance Test- Volume Resistivity At Maximum rated temperature temperature)	-	500	-
15.1.e(Insulation resistance Test- Volume Resistivity At Room temperature)	-	500	-
16.4(Flammability Test- Un affected portion)	-	500	-
16.4(Flammability Test- Period of Burning)	-	500	-
9.3(Minimum Thickness of Reduce core insulation)	-	500	-
9.2(Thickness of Reduce core insulation)	-	500	-
3.1 Table 2 IS 8130(Number of wires in the conductor)	-	500	-
Cl No. 16.10(Smoke density test)	-	0	-
Cl No. 16.8(Test for specific optical density of smoke)	-	0	-
Table 4(Copper purity test)	-	0	-
Cl.8(Conductor, Number of wires.)	-	500	-
Cl.8(Conductor, Number of wires.)	-	500	-
Cl.8(Flexibility class)	-	500	-
[(Cl.15), (d), 2](After ageing, Elongation of Sheath [Percentage])	-	1000	-

27 May, 2028

-
Included w.e.f. 31.12.2025 "Cl No. 16.10 (Smoke density test) Cl No. 16.8 (Test for specific optical density of smoke) Table 4 (Copper purity test)"

IS 302 : Part 2 : Sec 59 (1999)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 59 insect killers

insect killers

30000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 32 302-2-59 : 1999(Radiation Hazards)	-	1000	-
Cl. 31 302-2-59 : 1999(Resistance to Rusting)	-	1000	-
Cl. 30 302-2-59 : 1999(Resistance to Heat Fire & Tracking )	-	1000	-
Cl. 29 302-2-59 : 1999(Clearances, Creepage Distances & Solid insulation )	-	1000	-
Cl. 28 302-2-59 : 1999(Screws & Connections)	-	1000	-
Cl. 27 302-2-59 : 1999(Provision for Earthing )	-	1000	-
Cl. 26 302-2-59 : 1999(Terminals for External conductors )	-	1000	-
Cl. 25 302-2-59 : 1999(Supply Connection & External Flexible Cords)	-	1000	-
Cl. 24 302-2-59 : 1999(Components)	-	1000	-
Cl. 23 302-2-59 : 1999(Internal Wiring)	-	1000	-
Cl. 22 302-2-59 : 1999(Construction )	-	1000	-
Cl. 21 302-2-59 : 1999(Mechanical strength)	-	1000	-
Cl. 20 302-2-59 : 1999(Stability & Mechanical Hazards)	-	1000	-
Cl. 19 302-2-59 : 1999(Abnormal Operation )	-	1000	-
Cl. 18 302-2-59 : 1999(Endurance)	-	2000	-
Cl. 17 302-2-59 : 1999(Overload Protection of Transformers and Associated Circuit)	-	1000	-
Cl. 16 302-2-59 : 1999(Leakage Current & Electric Strength at Operating Temperature (After Humidity Treatment))	-	1500	-
Cl. 15 302-2-59 : 1999(Moisture Resistance Test )	-	3000	-
Cl. 14 302-2-59 : 1999(Radio and television interference suppression / Transient over voltages)	-	1000	-
Cl. 13 302-2-59 : 1999(Leakage Current & Electric Strength at Operating Temperature)	-	1500	-
Cl. 11 302-2-59 : 1999(Temperature Rise)	-	1000	-
Cl. 10 302-2-59 : 1999(Power Input and Current )	-	1000	-
Cl. 9 302-2-59 : 1999(Starting of motor operated appliances)	-	1000	-
Cl. 8 302-2-59 : 1999(Protection Against Electric Shock )	-	1000	-
Cl. 7 302-2-59 : 1999(Marking)	-	1000	-
(CI. 6 IS 302-2-59 : 1999(Classification )	-	1000	-

27 May, 2028

-
"1 Cl-9 (Cl-19.11.4.1 of IS 302-1) (Electrostatic discharge) (Electrostatic discharge) Facility not available 2 Cl-9 (Cl-19.11.4.2 of IS 302-1) (Radiated Fields) (Radiated Fields) Facility not available 3 Cl-9 (Cl-19.11.4.3 of IS 302-1) (Fast transient bursts) (Fast transient bursts) Facility not available 4 Cl-9 (Cl-19.11.4.4 of IS 302-1) (Surge Immunity test) (Surge Immunity test) Facility not available 5 Cl-9 (Cl-19.11.4.5 of IS 302-1) (Immunity to conducted discharge) (Immunity to conducted discharge) Facility not available 6 Cl-9 (Cl-19.11.4.6 of IS 302-1) (Voltage dips and interruptions) -9 (Cl-19.11.4.6 of IS 302-1) (Voltage dips and interruptions) Facility not available 7 Cl-9 (Cl-19.11.4.7 of IS 302-1) (Harmonics) (Harmonics) Facility not available"

IS 4159 (2002)

Mineral filled sheathed heating elements - Specification (Third Revision)

16900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.6 of IS 4159:2002 & IS 302-1:2008 (Classification)	-	100	-
Cl.6 of IS 4159:2002 & IS 302-1:2008 (Classification)	-	0	-
Cl.7 of IS 4159:2002 & IS 302-1:2008(Marking )	-	1000	-
Cl.7 of IS 4159:2002 & IS 302-1:2008(Marking )	-	0	-
Cl.7 of IS 4159:2002 & IS 302-1:2008(Marking )	-	0	-
Cl.7 of IS 4159:2002 & IS 302-1:2008(Marking )	-	0	-
Cl.7 of IS 4159:2002 & IS 302-1:2008(Marking )	-	0	-
Cl.7 of IS 4159:2002 & IS 302-1:2008(Marking )	-	0	-
Cl.7 of IS 4159:2002 & IS 302-1:2008(Marking )	-	0	-
Cl.7 of IS 4159:2002 & IS 302-1:2008(Marking )	-	0	-
Cl.7 of IS 4159:2002 & IS 302-1:2008(Marking )	-	0	-
Cl.7 of IS 4159:2002 & IS 302-1:2008(Marking )	-	0	-
Cl.7 of IS 4159:2002 & IS 302-1:2008(Marking )	-	0	-
Cl.7 of IS 4159:2002 & IS 302-1:2008(Marking )	-	0	-
Cl.7 of IS 4159:2002 & IS 302-1:2008(Marking )	-	0	-
Cl.8 of IS 4159:2002 & IS 302‐1:2008(Protection Against Electric Shock)	-	500	-
Cl.10 of IS 4159:2002 & IS 302-1:2008(Input & Current)	-	1000	-
Cl.11 of IS 4159:2002 & IS 302‐1:2008(Temperature Rise)	-	1000	-
Cl.11 of IS 4159:2002 & IS 302‐1:2008(Temperature Rise)	-	0	-
Cl.11 of IS 4159:2002 & IS 302‐1:2008(Temperature Rise)	-	0	-
Cl.11 of IS 4159:2002 & IS 302‐1:2008(Temperature Rise)	-	0	-
Cl.11 of IS 4159:2002 & IS 302‐1:2008(Temperature Rise)	-	0	-
Cl.11 of IS 4159:2002 & IS 302‐1:2008(Temperature Rise)	-	0	-
Cl.13 of IS 4159:2002 & IS 302-1: 2008(Electrical Insulation and Leakage Current at Operating Temperature)	-	1000	-
Cl.13 of IS 4159:2002 & IS 302-1: 2008(Electrical Insulation and Leakage Current at Operating Temperature)	-	0	-
Cl.15 of IS 4159:2002 & IS 302-1: 2008(Moisture Resistance)	-	2000	-
Cl.15 of IS 4159:2002 & IS 302-1: 2008(Moisture Resistance)	-	0	-
Cl.15 of IS 4159:2002 & IS 302-1: 2008(Moisture Resistance)	-	0	-
Cl.16 of IS 4159:2002 & IS 302-1: 2008(Insulation Resistance & Electric Strength (after Humidity Treatment))	-	1000	-
Cl.16 of IS 4159:2002 & IS 302-1: 2008(Insulation Resistance & Electric Strength (after Humidity Treatment))	-	0	-
Cl.18 of IS 4159:2002(Endurance Test )	-	1500	-
Cl.19 of IS 4159:2002 & IS 302-1: 2008(Abnormal Operation)	-	1000	-
Cl.19 of IS 4159:2002 & IS 302-1: 2008(Abnormal Operation)	-	0	-
Cl.19 of IS 4159:2002 & IS 302-1: 2008(Abnormal Operation)	-	0	-
Cl.19 of IS 4159:2002 & IS 302-1: 2008(Abnormal Operation)	-	0	-
Cl.19 of IS 4159:2002 & IS 302-1: 2008(Abnormal Operation)	-	0	-
Cl.19 of IS 4159:2002 & IS 302-1: 2008(Abnormal Operation)	-	0	-
Cl.19 of IS 4159:2002 & IS 302-1: 2008(Abnormal Operation)	-	0	-
Cl.19 of IS 4159:2002 & IS 302-1: 2008(Abnormal Operation)	-	0	-
Cl.20 of IS 4159:2002 & IS 302-1: 2008(Stability & Mechanical Hazards )	-	1000	-
Cl.21 of IS 4159:2002 & IS 302-1: 2008(Mechanical Strength)	-	500	-
Cl.21 of IS 4159:2002 & IS 302-1: 2008(Mechanical Strength)	-	0	-
Cl.22 of IS 4159:2002 & IS 302-1: 2008(Construction)	-	500	-
Cl.22 of IS 4159:2002 & IS 302-1: 2008(Construction)	-	500	-
Cl.22 of IS 4159:2002 & IS 302-1: 2008(Construction)	-	0	-
Cl.22 of IS 4159:2002 & IS 302-1: 2008(Construction)	-	0	-
Cl.22 of IS 4159:2002 & IS 302-1: 2008(Construction)	-	0	-
Cl.22 of IS 4159:2002 & IS 302-1: 2008(Construction)	-	0	-
Cl.22 of IS 4159:2002 & IS 302-1: 2008(Construction)	-	0	-
Cl.22 of IS 4159:2002 & IS 302-1: 2008(Construction)	-	0	-
Cl.22 of IS 4159:2002 & IS 302-1: 2008(Construction)	-	0	-
Cl.22 of IS 4159:2002 & IS 302-1: 2008(Construction)	-	0	-
Cl.22 of IS 4159:2002 & IS 302-1: 2008(Construction)	-	0	-
Cl.22 of IS 4159:2002 & IS 302-1: 2008(Construction)	-	0	-
Cl.22 of IS 4159:2002 & IS 302-1: 2008(Construction)	-	0	-
Cl.22 of IS 4159:2002 & IS 302-1: 2008(Construction)	-	0	-
Cl.22 of IS 4159:2002 & IS 302-1: 2008(Construction)	-	0	-
Cl.23 of IS 4159:2002 & IS 302-1: 2008(Internal Wiring )	-	500	-
Cl.23 of IS 4159:2002 & IS 302-1: 2008(Internal Wiring )	-	0	-
Cl.23 of IS 4159:2002 & IS 302-1: 2008(Internal Wiring )	-	0	-
Cl.23 of IS 4159:2002 & IS 302-1: 2008(Internal Wiring )	-	0	-
Cl.23 of IS 4159:2002 & IS 302-1: 2008(Internal Wiring )	-	0	-
Cl.23 of IS 4159:2002 & IS 302-1: 2008(Internal Wiring )	-	0	-
Cl.23 of IS 4159:2002 & IS 302-1: 2008(Internal Wiring )	-	0	-
Cl.23 of IS 4159:2002 & IS 302-1: 2008(Internal Wiring )	-	0	-
Cl.23 of IS 4159:2002 & IS 302-1: 2008(Internal Wiring )	-	0	-
Cl.23 of IS 4159:2002 & IS 302-1: 2008(Internal Wiring )	-	0	-
Cl.24 of IS 4159:2002 & IS 302-1: 2008(Component )	-	500	-
Cl.24 of IS 4159:2002 & IS 302-1: 2008(Component )	-	0	-
Cl.25 of IS 4159:2002 & IS 302-1: 2008(Supply connection & external flexible cables & cords)	-	500	-
Cl.26 of IS 4159:2002 & IS 302-1: 2008(Terminals for External Conductors)	-	500	-
Cl.26 of IS 4159:2002 & IS 302-1: 2008(Terminals for External Conductors)	-	0	-
Cl.26 of IS 4159:2002 & IS 302-1: 2008(Terminals for External Conductors)	-	0	-
Cl.26 of IS 4159:2002 & IS 302-1: 2008(Terminals for External Conductors)	-	0	-
Cl.26 of IS 4159:2002 & IS 302-1: 2008(Terminals for External Conductors)	-	0	-
Cl.26 of IS 4159:2002 & IS 302-1: 2008(Terminals for External Conductors)	-	0	-
Cl.26 of IS 4159:2002 & IS 302-1: 2008(Terminals for External Conductors)	-	0	-
Cl.26 of IS 4159:2002 & IS 302-1: 2008(Terminals for External Conductors)	-	0	-
Cl.26 of IS 4159:2002 & IS 302-1: 2008(Terminals for External Conductors)	-	0	-
Cl.26 of IS 4159:2002 & IS 302-1: 2008(Terminals for External Conductors)	-	0	-
Cl.26 of IS 4159:2002 & IS 302-1: 2008(Terminals for External Conductors)	-	0	-
Cl.26 of IS 4159:2002 & IS 302-1: 2008(Terminals for External Conductors)	-	0	-
Cl.26 of IS 4159:2002 & IS 302-1: 2008(Terminals for External Conductors)	-	0	-
Cl.27 of IS 4159:2002 & IS 302-1: 2008(Provision for Earthing)	-	500	-
Cl.27 of IS 4159:2002 & IS 302-1: 2008(Provision for Earthing)	-	0	-
Cl.27 of IS 4159:2002 & IS 302-1: 2008(Provision for Earthing)	-	0	-
Cl.27 of IS 4159:2002 & IS 302-1: 2008(Provision for Earthing)	-	0	-
Cl.27 of IS 4159:2002 & IS 302-1: 2008(Provision for Earthing)	-	0	-
Cl.28 of IS 4159:2002 & IS 302-1: 2008(Screws & Connection )	-	200	-
Cl.28 of IS 4159:2002 & IS 302-1: 2008(Screws & Connection )	-	0	-
Cl.28 of IS 4159:2002 & IS 302-1: 2008(Screws & Connection )	-	0	-
Cl.28 of IS 4159:2002 & IS 302-1: 2008(Screws & Connection )	-	0	-
Cl. 29 of IS 4159:2002 & IS 302-1: 2008(Creepage Distances & Clearances)	-	500	-
Cl. 29 of IS 4159:2002 & IS 302-1: 2008(Creepage Distances & Clearances)	-	0	-
Cl. 30 of IS 4159:2002 & IS 302-1: 2008(Resistance to Heat, Fire and Tracking)	-	1000	-
Cl. 30 of IS 4159:2002 & IS 302-1: 2008(Resistance to Heat, Fire and Tracking)	-	0	-
Cl. 31 of IS 4159:2002 & IS 302-1: 2008(Resistance to Rusting)	-	0	-
Cl. 33.1 of IS 4159:2002(Finish Test )	-	100	-
Cl. 102 of IS 4159:2002(Leakage & Hydrostatic Strength Test (for Oil heating elements) )	-	0	-
Cl. 102 of IS 4159:2002(Leakage & Hydrostatic Strength Test (for Oil heating elements) )	-	0	-
5(Ratings)	-	0	-
"Cl. 6 IS 4159:2021"(Classification)	-	0	-
Cl.6 of IS 4159:2002 & IS 302-1:2008 (Classification)	-	0	-
Cl.6 of IS 4159:2002 & IS 302-1:2008 (Classification)	-	0	-
Cl.7 of IS 4159:2002 & IS 302-1:2008(Marking )	-	0	-
Cl.7 of IS 4159:2002 & IS 302-1:2008(Marking )	-	0	-
Cl.7 of IS 4159:2002 & IS 302-1:2008(Marking )	-	0	-
Cl.7 of IS 4159:2002 & IS 302-1:2008(Marking )	-	0	-
Cl.7 of IS 4159:2002 & IS 302-1:2008(Marking )	-	0	-
Cl.7 of IS 4159:2002 & IS 302-1:2008(Marking )	-	0	-
Cl.7 of IS 4159:2002 & IS 302-1:2008(Marking )	-	0	-
Cl.7 of IS 4159:2002 & IS 302-1:2008(Marking )	-	0	-
Cl.7 of IS 4159:2002 & IS 302-1:2008(Marking )	-	0	-
Cl.7 of IS 4159:2002 & IS 302-1:2008(Marking )	-	0	-
Cl.7 of IS 4159:2002 & IS 302-1:2008(Marking )	-	0	-
Cl.7 of IS 4159:2002 & IS 302-1:2008(Marking )	-	0	-
Cl.7 of IS 4159:2002 & IS 302-1:2008(Marking )	-	0	-
Cl.8 of IS 4159:2002 & IS 302‐1:2008(Protection Against Electric Shock)	-	0	-
Cl.10 of IS 4159:2002 & IS 302-1:2008(Input & Current)	-	0	-
Cl.11 of IS 4159:2002 & IS 302‐1:2008(Temperature Rise)	-	0	-
Cl.11 of IS 4159:2002 & IS 302‐1:2008(Temperature Rise)	-	0	-
Cl.11 of IS 4159:2002 & IS 302‐1:2008(Temperature Rise)	-	0	-
Cl.11 of IS 4159:2002 & IS 302‐1:2008(Temperature Rise)	-	0	-
Cl.11 of IS 4159:2002 & IS 302‐1:2008(Temperature Rise)	-	0	-
Cl.11 of IS 4159:2002 & IS 302‐1:2008(Temperature Rise)	-	0	-
Cl.13 of IS 4159:2002 & IS 302-1: 2008(Electrical Insulation and Leakage Current at Operating Temperature)	-	0	-
Cl.13 of IS 4159:2002 & IS 302-1: 2008(Electrical Insulation and Leakage Current at Operating Temperature)	-	0	-
Cl.15 of IS 4159:2002 & IS 302-1: 2008(Moisture Resistance)	-	0	-
Cl.15 of IS 4159:2002 & IS 302-1: 2008(Moisture Resistance)	-	0	-
Cl.15 of IS 4159:2002 & IS 302-1: 2008(Moisture Resistance)	-	0	-
Cl.16 of IS 4159:2002 & IS 302-1: 2008(Insulation Resistance & Electric Strength (after Humidity Treatment))	-	0	-
Cl.16 of IS 4159:2002 & IS 302-1: 2008(Insulation Resistance & Electric Strength (after Humidity Treatment))	-	0	-
Cl.18 of IS 4159:2002(Endurance Test )	-	0	-
Cl.19 of IS 4159:2002 & IS 302-1: 2008(Abnormal Operation)	-	0	-
Cl.19 of IS 4159:2002 & IS 302-1: 2008(Abnormal Operation)	-	0	-
Cl.19 of IS 4159:2002 & IS 302-1: 2008(Abnormal Operation)	-	0	-
Cl.19 of IS 4159:2002 & IS 302-1: 2008(Abnormal Operation)	-	0	-
Cl.19 of IS 4159:2002 & IS 302-1: 2008(Abnormal Operation)	-	0	-
Cl.19 of IS 4159:2002 & IS 302-1: 2008(Abnormal Operation)	-	0	-
Cl.19 of IS 4159:2002 & IS 302-1: 2008(Abnormal Operation)	-	0	-
Cl.19 of IS 4159:2002 & IS 302-1: 2008(Abnormal Operation)	-	0	-
Cl.20 of IS 4159:2002 & IS 302-1: 2008(Stability & Mechanical Hazards )	-	0	-
Cl.21 of IS 4159:2002 & IS 302-1: 2008(Mechanical Strength)	-	0	-
Cl.21 of IS 4159:2002 & IS 302-1: 2008(Mechanical Strength)	-	0	-
Cl.22 of IS 4159:2002 & IS 302-1: 2008(Construction)	-	0	-
Cl.22 of IS 4159:2002 & IS 302-1: 2008(Construction)	-	0	-
Cl.22 of IS 4159:2002 & IS 302-1: 2008(Construction)	-	0	-
Cl.22 of IS 4159:2002 & IS 302-1: 2008(Construction)	-	0	-
Cl.22 of IS 4159:2002 & IS 302-1: 2008(Construction)	-	0	-
Cl.22 of IS 4159:2002 & IS 302-1: 2008(Construction)	-	0	-
Cl.22 of IS 4159:2002 & IS 302-1: 2008(Construction)	-	0	-
Cl.22 of IS 4159:2002 & IS 302-1: 2008(Construction)	-	0	-
Cl.22 of IS 4159:2002 & IS 302-1: 2008(Construction)	-	0	-
Cl.22 of IS 4159:2002 & IS 302-1: 2008(Construction)	-	0	-
Cl.22 of IS 4159:2002 & IS 302-1: 2008(Construction)	-	0	-
Cl.22 of IS 4159:2002 & IS 302-1: 2008(Construction)	-	0	-
Cl.22 of IS 4159:2002 & IS 302-1: 2008(Construction)	-	0	-
Cl.22 of IS 4159:2002 & IS 302-1: 2008(Construction)	-	0	-
Cl.22 of IS 4159:2002 & IS 302-1: 2008(Construction)	-	0	-
Cl.23 of IS 4159:2002 & IS 302-1: 2008(Internal Wiring )	-	0	-
Cl.23 of IS 4159:2002 & IS 302-1: 2008(Internal Wiring )	-	0	-
Cl.23 of IS 4159:2002 & IS 302-1: 2008(Internal Wiring )	-	0	-
Cl.23 of IS 4159:2002 & IS 302-1: 2008(Internal Wiring )	-	0	-
Cl.23 of IS 4159:2002 & IS 302-1: 2008(Internal Wiring )	-	0	-
Cl.23 of IS 4159:2002 & IS 302-1: 2008(Internal Wiring )	-	0	-
Cl.23 of IS 4159:2002 & IS 302-1: 2008(Internal Wiring )	-	0	-
Cl.23 of IS 4159:2002 & IS 302-1: 2008(Internal Wiring )	-	0	-
Cl.23 of IS 4159:2002 & IS 302-1: 2008(Internal Wiring )	-	0	-
Cl.23 of IS 4159:2002 & IS 302-1: 2008(Internal Wiring )	-	0	-
Cl.24 of IS 4159:2002 & IS 302-1: 2008(Component )	-	0	-
Cl.24 of IS 4159:2002 & IS 302-1: 2008(Component )	-	0	-
Cl.25 of IS 4159:2002 & IS 302-1: 2008(Supply connection & external flexible cables & cords)	-	0	-
Cl.26 of IS 4159:2002 & IS 302-1: 2008(Terminals for External Conductors)	-	0	-
Cl.26 of IS 4159:2002 & IS 302-1: 2008(Terminals for External Conductors)	-	0	-
Cl.26 of IS 4159:2002 & IS 302-1: 2008(Terminals for External Conductors)	-	0	-
Cl.26 of IS 4159:2002 & IS 302-1: 2008(Terminals for External Conductors)	-	0	-
Cl.26 of IS 4159:2002 & IS 302-1: 2008(Terminals for External Conductors)	-	0	-
Cl.26 of IS 4159:2002 & IS 302-1: 2008(Terminals for External Conductors)	-	0	-
Cl.26 of IS 4159:2002 & IS 302-1: 2008(Terminals for External Conductors)	-	0	-
Cl.26 of IS 4159:2002 & IS 302-1: 2008(Terminals for External Conductors)	-	0	-
Cl.26 of IS 4159:2002 & IS 302-1: 2008(Terminals for External Conductors)	-	0	-
Cl.26 of IS 4159:2002 & IS 302-1: 2008(Terminals for External Conductors)	-	0	-
Cl.26 of IS 4159:2002 & IS 302-1: 2008(Terminals for External Conductors)	-	0	-
Cl.26 of IS 4159:2002 & IS 302-1: 2008(Terminals for External Conductors)	-	0	-
Cl.26 of IS 4159:2002 & IS 302-1: 2008(Terminals for External Conductors)	-	0	-
Cl.27 of IS 4159:2002 & IS 302-1: 2008(Provision for Earthing)	-	0	-
Cl.27 of IS 4159:2002 & IS 302-1: 2008(Provision for Earthing)	-	0	-
Cl.27 of IS 4159:2002 & IS 302-1: 2008(Provision for Earthing)	-	0	-
Cl.27 of IS 4159:2002 & IS 302-1: 2008(Provision for Earthing)	-	0	-
Cl.27 of IS 4159:2002 & IS 302-1: 2008(Provision for Earthing)	-	0	-
Cl.28 of IS 4159:2002 & IS 302-1: 2008(Screws & Connection )	-	0	-
Cl.28 of IS 4159:2002 & IS 302-1: 2008(Screws & Connection )	-	0	-
Cl.28 of IS 4159:2002 & IS 302-1: 2008(Screws & Connection )	-	0	-
Cl.28 of IS 4159:2002 & IS 302-1: 2008(Screws & Connection )	-	0	-
Cl. 29 of IS 4159:2002 & IS 302-1: 2008(Creepage Distances & Clearances)	-	0	-
Cl. 29 of IS 4159:2002 & IS 302-1: 2008(Creepage Distances & Clearances)	-	0	-
Cl. 30 of IS 4159:2002 & IS 302-1: 2008(Resistance to Heat, Fire and Tracking)	-	0	-
Cl. 30 of IS 4159:2002 & IS 302-1: 2008(Resistance to Heat, Fire and Tracking)	-	0	-
Cl. 31 of IS 4159:2002 & IS 302-1: 2008(Resistance to Rusting)	-	0	-
Cl. 33.1 of IS 4159:2002(Finish Test )	-	0	-
Cl. 102 of IS 4159:2002(Leakage & Hydrostatic Strength Test (for Oil heating elements) )	-	0	-
Cl. 102 of IS 4159:2002(Leakage & Hydrostatic Strength Test (for Oil heating elements) )	-	0	-
5(Ratings)	-	0	-
"Cl. 6 IS 4159:2021"(Classification)	-	0	-
Cl.6 of IS 4159:2002 & IS 302-1:2008 (Classification)	-	0	-
Cl.6 of IS 4159:2002 & IS 302-1:2008 (Classification)	-	0	-
Cl.7 of IS 4159:2002 & IS 302-1:2008(Marking )	-	0	-
Cl.7 of IS 4159:2002 & IS 302-1:2008(Marking )	-	0	-
Cl.7 of IS 4159:2002 & IS 302-1:2008(Marking )	-	0	-
Cl.7 of IS 4159:2002 & IS 302-1:2008(Marking )	-	0	-
Cl.7 of IS 4159:2002 & IS 302-1:2008(Marking )	-	0	-
Cl.7 of IS 4159:2002 & IS 302-1:2008(Marking )	-	0	-
Cl.7 of IS 4159:2002 & IS 302-1:2008(Marking )	-	0	-
Cl.7 of IS 4159:2002 & IS 302-1:2008(Marking )	-	0	-
Cl.7 of IS 4159:2002 & IS 302-1:2008(Marking )	-	0	-
Cl.7 of IS 4159:2002 & IS 302-1:2008(Marking )	-	0	-
Cl.7 of IS 4159:2002 & IS 302-1:2008(Marking )	-	0	-
Cl.7 of IS 4159:2002 & IS 302-1:2008(Marking )	-	0	-
Cl.7 of IS 4159:2002 & IS 302-1:2008(Marking )	-	0	-
Cl.8 of IS 4159:2002 & IS 302‐1:2008(Protection Against Electric Shock)	-	0	-
Cl.10 of IS 4159:2002 & IS 302-1:2008(Input & Current)	-	0	-
Cl.11 of IS 4159:2002 & IS 302‐1:2008(Temperature Rise)	-	0	-
Cl.11 of IS 4159:2002 & IS 302‐1:2008(Temperature Rise)	-	0	-
Cl.11 of IS 4159:2002 & IS 302‐1:2008(Temperature Rise)	-	0	-
Cl.11 of IS 4159:2002 & IS 302‐1:2008(Temperature Rise)	-	0	-
Cl.11 of IS 4159:2002 & IS 302‐1:2008(Temperature Rise)	-	0	-
Cl.11 of IS 4159:2002 & IS 302‐1:2008(Temperature Rise)	-	0	-
Cl.13 of IS 4159:2002 & IS 302-1: 2008(Electrical Insulation and Leakage Current at Operating Temperature)	-	0	-
Cl.13 of IS 4159:2002 & IS 302-1: 2008(Electrical Insulation and Leakage Current at Operating Temperature)	-	0	-
Cl.15 of IS 4159:2002 & IS 302-1: 2008(Moisture Resistance)	-	0	-
Cl.15 of IS 4159:2002 & IS 302-1: 2008(Moisture Resistance)	-	0	-
Cl.15 of IS 4159:2002 & IS 302-1: 2008(Moisture Resistance)	-	0	-
Cl.16 of IS 4159:2002 & IS 302-1: 2008(Insulation Resistance & Electric Strength (after Humidity Treatment))	-	0	-
Cl.16 of IS 4159:2002 & IS 302-1: 2008(Insulation Resistance & Electric Strength (after Humidity Treatment))	-	0	-
Cl.18 of IS 4159:2002(Endurance Test )	-	0	-
Cl.19 of IS 4159:2002 & IS 302-1: 2008(Abnormal Operation)	-	0	-
Cl.19 of IS 4159:2002 & IS 302-1: 2008(Abnormal Operation)	-	0	-
Cl.19 of IS 4159:2002 & IS 302-1: 2008(Abnormal Operation)	-	0	-
Cl.19 of IS 4159:2002 & IS 302-1: 2008(Abnormal Operation)	-	0	-
Cl.19 of IS 4159:2002 & IS 302-1: 2008(Abnormal Operation)	-	0	-
Cl.19 of IS 4159:2002 & IS 302-1: 2008(Abnormal Operation)	-	0	-
Cl.19 of IS 4159:2002 & IS 302-1: 2008(Abnormal Operation)	-	0	-
Cl.19 of IS 4159:2002 & IS 302-1: 2008(Abnormal Operation)	-	0	-
Cl.20 of IS 4159:2002 & IS 302-1: 2008(Stability & Mechanical Hazards )	-	0	-
Cl.21 of IS 4159:2002 & IS 302-1: 2008(Mechanical Strength)	-	0	-
Cl.21 of IS 4159:2002 & IS 302-1: 2008(Mechanical Strength)	-	0	-
Cl.22 of IS 4159:2002 & IS 302-1: 2008(Construction)	-	0	-
Cl.22 of IS 4159:2002 & IS 302-1: 2008(Construction)	-	0	-
Cl.22 of IS 4159:2002 & IS 302-1: 2008(Construction)	-	0	-
Cl.22 of IS 4159:2002 & IS 302-1: 2008(Construction)	-	0	-
Cl.22 of IS 4159:2002 & IS 302-1: 2008(Construction)	-	0	-
Cl.22 of IS 4159:2002 & IS 302-1: 2008(Construction)	-	0	-
Cl.22 of IS 4159:2002 & IS 302-1: 2008(Construction)	-	0	-
Cl.22 of IS 4159:2002 & IS 302-1: 2008(Construction)	-	0	-
Cl.22 of IS 4159:2002 & IS 302-1: 2008(Construction)	-	0	-
Cl.22 of IS 4159:2002 & IS 302-1: 2008(Construction)	-	0	-
Cl.22 of IS 4159:2002 & IS 302-1: 2008(Construction)	-	0	-
Cl.22 of IS 4159:2002 & IS 302-1: 2008(Construction)	-	0	-
Cl.22 of IS 4159:2002 & IS 302-1: 2008(Construction)	-	0	-
Cl.22 of IS 4159:2002 & IS 302-1: 2008(Construction)	-	0	-
Cl.22 of IS 4159:2002 & IS 302-1: 2008(Construction)	-	0	-
Cl.23 of IS 4159:2002 & IS 302-1: 2008(Internal Wiring )	-	0	-
Cl.23 of IS 4159:2002 & IS 302-1: 2008(Internal Wiring )	-	0	-
Cl.23 of IS 4159:2002 & IS 302-1: 2008(Internal Wiring )	-	0	-
Cl.23 of IS 4159:2002 & IS 302-1: 2008(Internal Wiring )	-	0	-
Cl.23 of IS 4159:2002 & IS 302-1: 2008(Internal Wiring )	-	0	-
Cl.23 of IS 4159:2002 & IS 302-1: 2008(Internal Wiring )	-	0	-
Cl.23 of IS 4159:2002 & IS 302-1: 2008(Internal Wiring )	-	0	-
Cl.23 of IS 4159:2002 & IS 302-1: 2008(Internal Wiring )	-	0	-
Cl.23 of IS 4159:2002 & IS 302-1: 2008(Internal Wiring )	-	0	-
Cl.23 of IS 4159:2002 & IS 302-1: 2008(Internal Wiring )	-	0	-
Cl.24 of IS 4159:2002 & IS 302-1: 2008(Component )	-	0	-
Cl.24 of IS 4159:2002 & IS 302-1: 2008(Component )	-	0	-
Cl.25 of IS 4159:2002 & IS 302-1: 2008(Supply connection & external flexible cables & cords)	-	0	-
Cl.26 of IS 4159:2002 & IS 302-1: 2008(Terminals for External Conductors)	-	0	-
Cl.26 of IS 4159:2002 & IS 302-1: 2008(Terminals for External Conductors)	-	0	-
Cl.26 of IS 4159:2002 & IS 302-1: 2008(Terminals for External Conductors)	-	0	-
Cl.26 of IS 4159:2002 & IS 302-1: 2008(Terminals for External Conductors)	-	0	-
Cl.26 of IS 4159:2002 & IS 302-1: 2008(Terminals for External Conductors)	-	0	-
Cl.26 of IS 4159:2002 & IS 302-1: 2008(Terminals for External Conductors)	-	0	-
Cl.26 of IS 4159:2002 & IS 302-1: 2008(Terminals for External Conductors)	-	0	-
Cl.26 of IS 4159:2002 & IS 302-1: 2008(Terminals for External Conductors)	-	0	-
Cl.26 of IS 4159:2002 & IS 302-1: 2008(Terminals for External Conductors)	-	0	-
Cl.26 of IS 4159:2002 & IS 302-1: 2008(Terminals for External Conductors)	-	0	-
Cl.26 of IS 4159:2002 & IS 302-1: 2008(Terminals for External Conductors)	-	0	-
Cl.26 of IS 4159:2002 & IS 302-1: 2008(Terminals for External Conductors)	-	0	-
Cl.26 of IS 4159:2002 & IS 302-1: 2008(Terminals for External Conductors)	-	0	-
Cl.27 of IS 4159:2002 & IS 302-1: 2008(Provision for Earthing)	-	0	-
Cl.27 of IS 4159:2002 & IS 302-1: 2008(Provision for Earthing)	-	0	-
Cl.27 of IS 4159:2002 & IS 302-1: 2008(Provision for Earthing)	-	0	-
Cl.27 of IS 4159:2002 & IS 302-1: 2008(Provision for Earthing)	-	0	-
Cl.27 of IS 4159:2002 & IS 302-1: 2008(Provision for Earthing)	-	0	-
Cl.28 of IS 4159:2002 & IS 302-1: 2008(Screws & Connection )	-	0	-
Cl.28 of IS 4159:2002 & IS 302-1: 2008(Screws & Connection )	-	0	-
Cl.28 of IS 4159:2002 & IS 302-1: 2008(Screws & Connection )	-	0	-
Cl.28 of IS 4159:2002 & IS 302-1: 2008(Screws & Connection )	-	0	-
Cl. 29 of IS 4159:2002 & IS 302-1: 2008(Creepage Distances & Clearances)	-	0	-
Cl. 29 of IS 4159:2002 & IS 302-1: 2008(Creepage Distances & Clearances)	-	0	-
Cl. 30 of IS 4159:2002 & IS 302-1: 2008(Resistance to Heat, Fire and Tracking)	-	0	-
Cl. 30 of IS 4159:2002 & IS 302-1: 2008(Resistance to Heat, Fire and Tracking)	-	0	-
Cl. 31 of IS 4159:2002 & IS 302-1: 2008(Resistance to Rusting)	-	0	-
Cl. 33.1 of IS 4159:2002(Finish Test )	-	0	-
Cl. 102 of IS 4159:2002(Leakage & Hydrostatic Strength Test (for Oil heating elements) )	-	0	-
Cl. 102 of IS 4159:2002(Leakage & Hydrostatic Strength Test (for Oil heating elements) )	-	0	-
5(Ratings)	-	0	-
"Cl. 6 IS 4159:2021"(Classification)	-	0	-

27 May, 2028

-
Included w.e.f 30.01.2026 Exclusion: Cl. 102 of IS 4159:2002 (Leakage & Hydrostatic Strength Test (for Oil heating elements) ) Cl.19 of IS 4159:2002 & IS 302-1: 2008 (Abnormal Operation)

IS 302 : Part 2 : Sec 80 (2017)

Household and similar electrical appliances - Safety: Part 2 - 80 particular requirements for fans (First Revision)

Household and Similar Electrical Appliances - Safety - Particular requirements for Fans

28000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
32.0(Radiation, Toxicity and Similar Hazards)	-	1000	-
31.0(Resistance To Rusting)	-	1500	-
30.0(Resistance To Heat and Fire)	-	1000	-
29.0(Creepage Distances and Clearances)	-	2000	-
28.0(Screws and Connections)	-	500	-
27.0(Provision For Earthing)	-	2000	-
26.0(Terminals for external conductors)	-	1000	-
25.0(Supply Connection and External Flexible Cords)	-	1000	-
24.0(Components)	-	1000	-
23.0(Internal Wiring)	-	1000	-
22.0(Construction)	-	1000	-
21.0(Mechanical Strength)	-	1000	-
20.0(Stability and mechanical hazards)	-	1000	-
19.0(Abnormal Operation)	-	1000	-
17.0(Overload Protection of transformer and associated circuit)	-	1000	-
16.0(Leakage current and Electric strength (After Humidity (Environmental) Treatment))	-	1000	-
15.0(Moisture resistance)	-	1000	-
14.0(Transient Overvoltage)	-	1000	-
13.0(Leakage Current and electric strength at operating temperature)	-	1000	-
11.0(Heating)	-	1000	-
10.0(Input and Current)	-	1000	-
8.0(Protection against access to live parts)	-	1000	-
7.0(Classification)	-	1000	-
6.0(Marking and Instructions)	-	1000	-
4(GENERAL REQUIREMENT)	-	1000	-
5(GENERAL CONDITIONS FOR THE TESTS)	-	1000	-

27 May, 2028

-
Included w.e.f 04.11.2025 Exclusion: Cl 19.11.4.1-19.11.4.7(EMI/EMC)

IS 2830 (2012)

Carbon steel cast billet ingots, billets, blooms and slabs for re-rolling into steel for general structural purposes - Specification (Third Revision)

C15,C18,C20,C15MMn,C18MMn,C20MMn,C15HMn,C18HMn,C20HMn,C25HMn

8500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 9(Workmanship)	-	500	-
Cl 10.1(Workmanship)	-	500	-
Cl 10.2(Workmanship)	-	500	-
Cl 10.2(Press)	-	500	-
Cl 10.3(Workmanship)	-	500	-
Cl 11(Length, Width & Thickness)	-	500	-
Cl 9(Workmanship)	-	500	-
Cl 10.1.a)(Workmanship)	-	500	-
Cl 10.1.b)(Workmanship)	-	500	-
Cl 10.2(Press)	-	500	-
Cl 10.3(Workmanship)	-	500	-
Cl 11(Length, Width & Thickness)	-	500	-
Cl 9(Workmanship)	-	500	-
Cl 10.1(Workmanship)	-	500	-
Cl 10.2(Workmanship)	-	500	-
Cl 10.2(Press)	-	500	-
Cl 10.3(Workmanship)	-	500	-
Cl 11(Length)	-	500	-
6.1(Carbon %)	-	500	-
6.1(Manganese %)	-	5000	-
6.1(Phosphorus %)	-	5000	-
6.1(Sulphur %)	-	5000	-
6.1(Silicon %)	-	5000	-
6.1( Copper %)	-	5000	-
6.1( Aluminium %)	-	5000	-
6.1( Nb)	-	5000	-
6.1(V)	-	5000	-
6.1( Ti)	-	5000	-
6.1(Cr)	-	5000	-
6.1(Mo)	-	5000	-
6.1(Ni)	-	5000	-
6.1( Nitrogen%)	-	5000	-
6.1(Carbon %)	-	5000	-
6.1(Manganese %)	-	5000	-
6.1(Phosphorus %)	-	5000	-
6.1(Sulphur %)	-	5000	-
6.1(Silicon %)	-	5000	-
6.1( Copper %)	-	5000	-
6.1( Aluminium %)	-	5000	-
6.1( Nb)	-	5000	-
6.1(V)	-	5000	-
6.1( Ti)	-	5000	-
6.1(Cr)	-	5000	-
6.1(Mo)	-	5000	-
6.1(Ni)	-	5000	-
6.1( Nitrogen%)	-	5000	-
6.1(Carbon %)	-	5000	-
6.1(Manganese %)	-	5000	-
6.1(Phosphorus %)	-	5000	-
6.1(Sulphur %)	-	5000	-
6.1(Silicon %)	-	5000	-
6.1( Copper %)	-	5000	-
6.1( Aluminium %)	-	5000	-
6.1( Nb)	-	5000	-
6.1(V)	-	5000	-
6.1( Ti)	-	5000	-
6.1(Cr)	-	5000	-
6.1(Mo)	-	5000	-
6.1(Ni)	-	5000	-
6.1(Nitrogen%)	-	5000	-
11(Thickness)	-	500	-
11(Width)	-	500	-
Clause 6.1(IS 2830 : 2012)	-	500	-
Cl. 11.2(Out of Squareness)	-	500	-
Cl. 10.3(Camber)	-	500	-
Cl. 10.2(Bend)	-	500	-
Clause 10.3(Camber)	-	500	-
Clause 10.2(Bend)	-	500	-
Cl 11(Length, Width & Thickness)	-	500	-
Cl 10.3(Workmanship)	-	500	-
Cl 10.2(Press)	-	500	-
Cl 10.2(Workmanship)	-	500	-
Cl 10.1(Workmanship)	-	500	-
Cl 9(Workmanship)	-	500	-
Cl 9(Workmanship)	-	500	-
Cl 10.1(Workmanship)	-	500	-
Cl 10.2(Workmanship)	-	500	-
Cl 10.2(Press)	-	500	-
Cl 10.3(Workmanship)	-	500	-
Cl 11(Length, Width & Thickness)	-	500	-
Clause 6, Table 1 Note : 1(By Calculation)	-	5000	-
Clause 6, Table 1 Note : 3(By Calculation)	-	5000	-
6(Carbon as C - IS:228)	-	5000	-
6(Manganese as Mn-IS:228)	-	5000	-
6(Sulphur as S- IS:228)	-	5000	-
6(carbon equivalent (CE))	-	5000	-
6(Micro alloying elements)	-	5000	-
6(Sulphur + Phosphorus)	-	5000	-
6(Copper as Cu)	-	5000	-
8(Selection of Test samples)	-	500	-
12(Tolerance - IS 2830)	-	500	-
13(Marking)	-	500	-
Clause 6, Table 1 Note : 1(Carbon Equivalent)	-	5000	-
Clause 6, Table 1 Note : 3(Nb+V+Ti)	-	5000	-
Clause 6, Table 1 Note : 9(S+P)	-	5000	-
Clause 9(Freedom from Defect)	-	500	-
4(Supply of material)	-	500	-
5(Manufacture)	-	500	-
6.1(Chemical method)	-	5000	-
6.2(Copper bearing quality)	-	5000	-
6.3(Check Analysis)	-	5000	-
10.2(Bend)	-	500	-
10.3(Chamber)	-	500	-
11(Dimensions)	-	500	-
12(Tolrences)	-	500	-
13(Marking)	-	500	-
Cl 6.1(Carbon)	-	5000	-
Cl 6.1(Sulphur)	-	5000	-
Cl 6.1(Phosphorous)	-	5000	-
Cl 6.1(Manganese)	-	5000	-
Cl 6.1(Silicon)	-	5000	-
Cl 6.1(Nitrogen)	-	5000	-
Cl 6.1(Carbon Equivalent)	-	5000	-
Cl 6.1(Aluminium)	-	5000	-
Cl 6.1(Nb)	-	5000	-
Cl 6.1(V)	-	5000	-
Cl 6.1(Ti)	-	5000	-
Cl 6.1(Nb+V+Ti)	-	5000	-
Cl 6.1(Sulphur+ Phosphorous)	-	5000	-
Cl 6.1(Copper)	-	5000	-

27 May, 2028

-
Included w.e.f 22.07.2025

IS 1659 (2004)

Block boards - Specification (Fourth Revision)

MR/BWP

8500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
9.2.6(Spot test - Annexure L)	-	1000	-
9.2.5(Modulus of elasticity - MINIMUM INDIVIDUAL - Annexure K)	-	500	-
9.2.5(Modulus of elasticity - AVERAGE - Annexure K)	-	500	-
9.2.5(Modulus of rupture - MINIMUM INDIVIDUAL - Annexure K)	-	500	-
9.2.5(Modulus of rupture - AVERAGE - Annexure K)	-	500	-
9.2.4(Mycological Test [for MR grade only] - Annexure J)	-	1000	-
9.2.3(Adhesion of Plies - Annexure H)	-	500	-
9.2.2 (Resistance to water - Annexure G, Annexure H [For MR Grade])	-	1000	-
9.2.2 (Resistance to water - Annexure G, Annexure H [For BWP grade])	-	1000	-
9.2.1(Dimensional Changes caused by humidity Change in local planeness - Annexure F)	-	1000	-
9.2.1(Dimensional Changes caused by humidity - Delamination - Annexure F)	-	1000	-
9.2.1(Dimensional Changes caused by humidity - Change in thickness - at 40% RH - Annexure F)	-	1000	-
9.2.1(Dimensional Changes caused by humidity - Change in Thickness - at 90% RH - Annexure F)	-	1000	-
9.2.1(Dimensional Changes caused by humidity - Change in Length - at 40% RH - Annexure F)	-	1000	-
9.2.1(Dimensional Changes caused by humidity - Change in Length - at 90% RH - Annexure F)	-	1000	-
7.3(Dimensional Requirements - Variation in thickness - Annexure E)	-	100	-
7.3(Dimensional Requirements - Squareness - Annexure D)	-	100	-
7.3(Dimensional Requirements - Edge Straightness - Annexure D)	-	100	-
7.3(Dimensional Requirements - Thickness - Annexure E)	-	100	-
7.3(Dimensional Requirements - Width - 8.1.4)	-	100	-
7.3(Dimensional Requirements - Length - 8.1.4)	-	100	-
8.1.3, 6.3.3, IS 1328(Visual Inspection - Permissible Defects - IS 1328 [test method for DECORATIVE type])	-	0	-
8.1.3, 6.3.3, IS 303(Visual Inspection - Permissible Defects - IS 303 [test method for COMMERCIAL type])	-	0	-
9.2.6 (mechanical)(Spot test - Annexure L)	-	1000	-
cl. 11(marking)	-	0	-
cl. 11.1(marking - BIS certification marking)	-	0	-
Cl-10(ADDITIONAL REQUIREMENTS FOR ECO-MARK)	-	0	-
6.2(Core- Moisture & Width)	-	500	-
6.3(Cross Bands and Faces- Moisture content)	-	500	-
6.3.1(Thickness of cross band and face veneers)	-	500	-
Cl-7.1(Thickness)	-	0	-
Cl-7.2(Sizes)	-	0	-
9.2.6(Spot test - Annexure L)	-	-	-
9.2.6 (mechanical)(Spot test - Annexure L)	-	-	-
cl. 11(marking)	-	-	-
cl. 11.1(marking - BIS certification marking)	-	-	-
Cl-10(ADDITIONAL REQUIREMENTS FOR ECO-MARK)	-	-	-
6.2(Core- Moisture & Width)	-	-	-
6.3(Cross Bands and Faces- Moisture content)	-	-	-
6.3.1(Thickness of cross band and face veneers)	-	-	-
Cl-7.1(Thickness)	-	-	-
Cl-7.2(Sizes)	-	-	-

27 May, 2028

-
Included w.e.f.07.07.2025

IS 733 (1983)

Specification for wrought aluminium and aluminium alloy bars, rods and sections (For General Engineering Purposes) (Third Revision)

All Designation

5200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 4(Freedom from Defects)	-	200	-
Cl. 5.1, Table 2(0.2 Percent proof stress- IS 1816)	-	1000	-
Cl. 5.1, Table 2(Tensile Strength- IS 1816)	-	1000	-
Cl. 5.1, Table 2(Elongation on 50 mm or 5.65√So Gauge Length)	-	1000	-
Cl. 0.4, 5.1, Table 1(Aluminium- IS 504 or by any other suitable instrumental method)	-	3000	-
Cl. 0.4, 5.1, Table 1(Copper- IS 504 or by any other suitable instrumental method)	-	3000	-
Cl. 0.4, 5.1, Table 1(Magnesium- IS 504 or by any other suitable instrumental method)	-	3000	-
Cl. 0.4, 5.1, Table 1(Silicon- IS 504 or by any other suitable instrumental method)	-	3000	-
Cl. 0.4, 5.1, Table 1(Iron- IS 504 or by any other suitable instrumental method)	-	3000	-
Cl. 0.4, 5.1, Table 1(Zinc- IS 504 or by any other suitable instrumental method)	-	3000	-
Cl. 0.4, 5.1, Table 1(Aluminium- IS 504 or by any other suitable instrumental method)	-	3000	-
Cl. 0.4, 5.1, Table 1(Titanium and / or other grain refining elements - IS 504 or by any other suitable instrumental method)	-	3000	-
Cl. 0.4, 5.1, Table 1(Chromium- IS 504 or by any other suitable instrumental method)	-	3000	-
Cl. 0.4, 5.1, Table 1(Ti+ V- IS 504 or by any other suitable instrumental method)	-	3000	-
Cl. 0.4, 5.1, Table 1(Total Impurities- IS 504 or by any other suitable instrumental method)	-	3000	-
Cl. 0.4, 5.1, Table 1(Cr+ Mn- IS 504 or by any other suitable instrumental method)	-	3000	-
7(Dimension - IS 3965)	-	1000	-
11(Marking)	-	0	-
Table-1, Clause - 5.1(Copper)	-	3000	-
Table-1, Clause - 5.1(Iron)	-	3000	-
Table-1, Clause - 5.1(Magnesium)	-	3000	-
Table-1, Clause - 5.1(Manganese)	-	3000	-
Table-1, Clause - 5.1(Titanium)	-	3000	-
Table-1, Clause - 5.1(Silicon)	-	3000	-
Table-1, Clause - 5.1(Chromium)	-	3000	-
Table-1, Clause - 5.1(Zinc)	-	3000	-
Cl. 4(Freedom from Defects)	-	0	-
Cl. 5.1, Table 2(0.2 Percent proof stress- IS 1816)	-	0	-
Cl. 5.1, Table 2(Tensile Strength- IS 1816)	-	0	-
Cl. 5.1, Table 2(Elongation on 50 mm or 5.65√So Gauge Length)	-	0	-
Cl. 0.4, 5.1, Table 1(Aluminium- IS 504 or by any other suitable instrumental method)	-	0	-
Cl. 0.4, 5.1, Table 1(Copper- IS 504 or by any other suitable instrumental method)	-	0	-
Cl. 0.4, 5.1, Table 1(Magnesium- IS 504 or by any other suitable instrumental method)	-	0	-
Cl. 0.4, 5.1, Table 1(Silicon- IS 504 or by any other suitable instrumental method)	-	0	-
Cl. 0.4, 5.1, Table 1(Iron- IS 504 or by any other suitable instrumental method)	-	0	-
Cl. 0.4, 5.1, Table 1(Zinc- IS 504 or by any other suitable instrumental method)	-	0	-
Cl. 0.4, 5.1, Table 1(Aluminium- IS 504 or by any other suitable instrumental method)	-	0	-
Cl. 0.4, 5.1, Table 1(Titanium and / or other grain refining elements - IS 504 or by any other suitable instrumental method)	-	0	-
Cl. 0.4, 5.1, Table 1(Chromium- IS 504 or by any other suitable instrumental method)	-	0	-
Cl. 0.4, 5.1, Table 1(Ti+ V- IS 504 or by any other suitable instrumental method)	-	0	-
Cl. 0.4, 5.1, Table 1(Total Impurities- IS 504 or by any other suitable instrumental method)	-	0	-
Cl. 0.4, 5.1, Table 1(Cr+ Mn- IS 504 or by any other suitable instrumental method)	-	0	-
7(Dimension - IS 3965)	-	0	-
11(Marking)	-	0	-
Table-1, Clause - 5.1(Copper)	-	0	-
Table-1, Clause - 5.1(Iron)	-	0	-
Table-1, Clause - 5.1(Magnesium)	-	0	-
Table-1, Clause - 5.1(Manganese)	-	0	-
Table-1, Clause - 5.1(Titanium)	-	0	-
Table-1, Clause - 5.1(Silicon)	-	0	-
Table-1, Clause - 5.1(Chromium)	-	0	-
Table-1, Clause - 5.1(Zinc)	-	0	-

27 May, 2028

-
Included w.e.f.07.07.2025

IS 7887 (1992)

Mild steel wire rod for general engineering purposes - Specification (First Revision)

4200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 8(Workmanship)	-	200	-
Cl 9(Nominal Diameter & Out Of Shape)	-	1000	-
Cl 8(Workmanship)	-	200	-
Cl 9(Nominal Diameter & Out Of Shape)	-	1000	-
Cl 8(Freedom from defects)	-	200	-
Cl 9(Nominal Diameter & Out Of Shape)	-	1000	-
6.1(Carbon %)	-	3000	-
6.1(Manganese %)	-	3000	-
6.1(Phosphorus %)	-	3000	-
6.1(Sulphur %)	-	3000	-
6.1(Silicon %)	-	3000	-
6.1( Aluminium %)	-	3000	-
6.1(Carbon %)	-	3000	-
6.1(Manganese %)	-	3000	-
6.1(Phosphorus %)	-	3000	-
6.1(Sulphur %)	-	3000	-
6.1(Silicon %)	-	3000	-
6.1( Aluminium %)	-	3000	-
6.1(Carbon %)	-	3000	-
6.1(Manganese %)	-	3000	-
6.1(Phosphorus %)	-	3000	-
6.1(Sulphur %)	-	3000	-
6.1(Silicon %)	-	3000	-
6.1( Aluminium %)	-	3000	-
Cl. 9(Out of Shape)	-	1000	-
Cl 9(Nominal Diameter & Out Of Shape)	-	1000	-
Cl 8(Workmanship)	-	200	-
Cl 8(Workmanship)	-	200	-
Cl 9(Nominal Diameter & Out Of Shape)	-	1000	-
Table 1 Note 3(Any Instrumental Method/Chemical Method)	-	3000	-
Amendment 1(Any Instrumental Method/Chemical Method)	-	3000	-
Amendment 1(Any Instrumental Method/Chemical Method)	-	3000	-
Amendment 1(Any Instrumental Method/Chemical Method)	-	3000	-
Amendment 1(By Calculation)	-	3000	-
Table 1 Note 3(Any Instrumental Method/Chemical Method)	-	3000	-
Amendment 1(Any Instrumental Method/Chemical Method)	-	3000	-
Amendment 1(Any Instrumental Method/Chemical Method)	-	3000	-
Amendment 1(Any Instrumental Method/Chemical Method)	-	3000	-
Amendment 1(Any Instrumental Method/Chemical Method)	-	3000	-
Amendment 1(By Calculation)	-	3000	-
Table 1 Note 3(Copper)	-	3000	-
Amendment 1(Niobium)	-	3000	-
Amendment 1(Vanadium)	-	3000	-
Amendment 1(Titanium)	-	3000	-
Amendment 1(Micro Alloying Element (Nb+V+Ti))	-	3000	-
9.1(Diameter - SOP-MT-23)	-	1000	-
9.3(Out of Shape - SOP-MT-23)	-	1000	-
11(Marking)	-	200	-
Table 1 Note 3(Copper)	-	3000	-
Amendment 1(Niobium)	-	3000	-
Amendment 1(Vanadium)	-	3000	-
Amendment 1(Titanium)	-	3000	-
Amendment 1(Micro Alloying Element (Nb+V+Ti))	-	3000	-
Cl 8(Workmanship)	-	-	-
Cl 9(Nominal Diameter & Out Of Shape)	-	-	-
Cl 8(Workmanship)	-	-	-
Cl 9(Nominal Diameter & Out Of Shape)	-	-	-
Cl 8(Freedom from defects)	-	-	-
Cl 9(Nominal Diameter & Out Of Shape)	-	-	-
6.1(Carbon %)	-	-	-
6.1(Manganese %)	-	-	-
6.1(Phosphorus %)	-	-	-
6.1(Sulphur %)	-	-	-
6.1(Silicon %)	-	-	-
6.1( Aluminium %)	-	-	-
6.1(Carbon %)	-	-	-
6.1(Manganese %)	-	-	-
6.1(Phosphorus %)	-	-	-
6.1(Sulphur %)	-	-	-
6.1(Silicon %)	-	-	-
6.1( Aluminium %)	-	-	-
6.1(Carbon %)	-	-	-
6.1(Manganese %)	-	-	-
6.1(Phosphorus %)	-	-	-
6.1(Sulphur %)	-	-	-
6.1(Silicon %)	-	-	-
6.1( Aluminium %)	-	-	-
Cl. 9(Out of Shape)	-	-	-
Cl 9(Nominal Diameter & Out Of Shape)	-	-	-
Cl 8(Workmanship)	-	-	-
Cl 8(Workmanship)	-	-	-
Cl 9(Nominal Diameter & Out Of Shape)	-	-	-
Table 1 Note 3(Any Instrumental Method/Chemical Method)	-	-	-
Amendment 1(Any Instrumental Method/Chemical Method)	-	-	-
Amendment 1(Any Instrumental Method/Chemical Method)	-	-	-
Amendment 1(Any Instrumental Method/Chemical Method)	-	-	-
Amendment 1(By Calculation)	-	-	-
Table 1 Note 3(Any Instrumental Method/Chemical Method)	-	-	-
Amendment 1(Any Instrumental Method/Chemical Method)	-	-	-
Amendment 1(Any Instrumental Method/Chemical Method)	-	-	-
Amendment 1(Any Instrumental Method/Chemical Method)	-	-	-
Amendment 1(Any Instrumental Method/Chemical Method)	-	-	-
Amendment 1(By Calculation)	-	-	-
Table 1 Note 3(Copper)	-	-	-
Amendment 1(Niobium)	-	-	-
Amendment 1(Vanadium)	-	-	-
Amendment 1(Titanium)	-	-	-
Amendment 1(Micro Alloying Element (Nb+V+Ti))	-	-	-
9.1(Diameter - SOP-MT-23)	-	-	-
9.3(Out of Shape - SOP-MT-23)	-	-	-
11(Marking)	-	-	-
Table 1 Note 3(Copper)	-	-	-
Amendment 1(Niobium)	-	-	-
Amendment 1(Vanadium)	-	-	-
Amendment 1(Titanium)	-	-	-
Amendment 1(Micro Alloying Element (Nb+V+Ti))	-	-	-

27 May, 2028

-
Included w.e.f.19.06.2025

IS 14650 (2023)

UNALLOYED AND ALLOYED STEEL INGOT AND SEMI-FINISHED PRODUCTS FOR RE-ROLLING PURPOSES - SPECIFICATION (First Revision)

6000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause - 7.1(CARBON)	-	3000	-
Clause - 7.1(SULPHUR)	-	3000	-
Clause - 7.1(PHOSPHURS)	-	3000	-
Clause - 7.1(MANGANESE)	-	3000	-
Clause - 7.1(NITROGEN)	-	3000	-
As per Clause 10(Dimension)	-	3000	-
As per Clause 10.1(Dimension Width)	-	3000	-
As per Clause 10.1(Dimension Thickness)	-	3000	-
As per Clause 10.2(Dimension Length)	-	3000	-
As per Clause 11/11.1/11.2/11.3/11.4(Tolerances)	-	3000	-
As per Clause 11.5(Bend)	-	3000	-
As per Clause 11.6(Camber)	-	3000	-
As per Clause 11.7 (i)(Out of Square)	-	3000	-
As per Clause 11.7 (ii)(Round Corners)	-	3000	-
As per Clause 11.7 (iii)(Ridges due to gas cutting)	-	3000	-
As per Clause 11.7 (iv)(Taper (Width variation on top and bottom surface at one location)	-	3000	-
As per Clause 11.7 (v)(Edge slanting (Width variation on top and bottom surface at one location)	-	3000	-
As per Clause 11.7 (vi)(Convexity(Difference in thickness from edge to curve)	-	3000	-
As per Clause 11.7 (vii)(Chamfering (Length variation on top and bottom surface at one location)	-	3000	-
As per Clause 11.7 (viii)(Wedge (Thickness variation at the edges along the cross section)	-	3000	-
As per Clause 11.7 (ix)(Scarfing pits)	-	3000	-
As per Clause 12/12.1/12.2/12.3(Freedom from defects)	-	0	-
Clause. 14(Marking)	-	0	-
Clause.15(Ordering information)	-	0	-
Clause.6.0(Manufacture)	-	0	-
Clause.7.1(Silicon)	-	3000	-
Clause.7.1(Carbon Equbalant)	-	3000	-
Clause.7.1(Microalloy element)	-	3000	-

27 May, 2028

-
Included w.e.f 31.07.2025 Exclusion: Clause. 13 (Macro examination test.), Clause. 13 (Sulphur print.), Clause. 13 (Inclusion content)

IS 12823 (2015)

Prelaminated Particle Boards from Wood and other Lignocellulosic Material - Specification ( First Revision )

Grade 1/Grade 2

14500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 4(Grades & Types)	-	0	-
Cl 6(Manufacture)	-	0	-
Cl 7(Finish)	-	500	-
Cl 8(Dimensions & Tolerances)	-	1500	-
Cl 10.2(Test For Density)	-	500	-
Cl 10.3(Test For Moisture Content)	-	500	-
Cl 10.4(For Water AbsorptionTest )	-	1000	-
Cl 10.5(For Swelling in water Test )	-	1000	-
Cl 10.6(Tesr For Modulus Of Elasticity & Mudulus Of Rupture)	-	2000	-
Cl 10.7(For Determination of Tensile Strength Perpendicular to Surface)	-	1000	-
Cl 10.8(For Determination of Tensile Strength Perpendicular to Surface After Ageing Test)	-	1000	-
Cl 10.9(Test For Screw Withdrawal Strength)	-	1000	-
Cl 10.10 & Annex C( Test For Abrasion Resistance)	-	1000	-
Cl 10.11 & Annex D( Test For Resistance to Steam)	-	500	-
Cl 10.12 & Annex E( Test For Crack Resistance)	-	500	-
Cl 10.13 & Annex F( Test For Resistance to Cigarette Burn)	-	500	-
Cl 10.14 & Annex G( Test For Resistance to Stain)	-	500	-
Cl 4(Grades & Types)	-	0	-
Cl 6(Manufacture)	-	0	-
Cl 7(Finish)	-	500	-
Cl 8(Dimensions & Tolerances)	-	1500	-
Cl 10.2(Test For Density)	-	500	-
Cl 10.3(Test For Moisture Content)	-	500	-
Cl 10.4(For Water AbsorptionTest )	-	1000	-
Cl 10.5(For Swelling in water Test )	-	1000	-
Cl 10.6(Tesr For Modulus Of Elasticity & Mudulus Of Rupture)	-	2000	-
Cl 10.7(For Determination of Tensile Strength Perpendicular to Surface)	-	1000	-
Cl 10.8(For Determination of Tensile Strength Perpendicular to Surface After Ageing Test)	-	1000	-
Cl 10.9(Test For Screw Withdrawal Strength)	-	1000	-
Cl 10.10 & Annex C( Test For Abrasion Resistance)	-	1000	-
Cl 10.11 & Annex D( Test For Resistance to Steam)	-	500	-
Cl 10.12 & Annex E( Test For Crack Resistance)	-	500	-
Cl 10.13 & Annex F( Test For Resistance to Cigarette Burn)	-	500	-
Cl 10.14 & Annex G( Test For Resistance to Stain)	-	500	-
Cl 10.14 & Annex G( Test For Resistance to Stain)	-	500	-
Cl 10.13 & Annex F( Test For Resistance to Cigarette Burn)	-	500	-
Cl 10.12 & Annex E( Test For Crack Resistance)	-	500	-
Cl 10.11 & Annex D( Test For Resistance to Steam)	-	500	-
Cl 10.10 & Annex C( Test For Abrasion Resistance)	-	1000	-
Cl 10.9(Test For Screw Withdrawal Strength)	-	1000	-
Cl 10.8(For Determination of Tensile Strength Perpendicular to Surface After Ageing Test)	-	1000	-
Cl 10.7(For Determination of Tensile Strength Perpendicular to Surface)	-	1000	-
Cl 10.6(Tesr For Modulus Of Elasticity & Mudulus Of Rupture)	-	2000	-
Cl 10.5(For Swelling in water Test )	-	1000	-
Cl 10.4(For Water AbsorptionTest )	-	1000	-
Cl 10.3(Test For Moisture Content)	-	500	-
Cl 10.2(Test For Density)	-	500	-
Cl 8(Dimensions & Tolerances)	-	1500	-
Cl 7(Finish)	-	500	-
Cl 6(Manufacture)	-	0	-
Cl 4(Grades & Types)	-	0	-
Cl 10.15(Test for Formaldehyde Content/Emission)	-	1500	-
Cl-11(ADDITIONAL REQUIREMENTS FOR ECO-MARK)	-	0	-

27 May, 2028

-
Included w.e.f.30.05.2025

IS 3087 (2005)

Practicle boards of wood and other lingnocellulosic materials (medium density) for general purposes -Specification

Grade 1/Grade 2

12500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
1 (i) Table 1(Density Variation (Flat Pressed Single Layer))	-	500	-
1 (i) Table 1(Density Variation (Flat Pressed Three Layer grade 1))	-	500	-
1 (i) Table 1(Density Variation (Flat Pressed Three Layer grade 2))	-	500	-
1 (i) Table 1(Density Variation (Extrusion Pressed Solids) XPS)	-	500	-
1 (i) Table 1(Density Variation (Extrusion Pressed Tubular) XPS)	-	500	-
1 (ii) (a) Table 1(Water absorption, 2h soacking (Flat Pressed Single Layer))	-	1000	-
1 (ii) (a) Table 1(Water absorption, 2h soacking (Flat Pressed Three Layer grade 1))	-	1000	-
1 (ii) (a) Table 1(Water absorption, 2h soacking (Flat Pressed Three Layer grade 2))	-	1000	-
1 (ii) (a) Table 1(Water absorption, 2h soacking (Extrusion Pressed Solids) XPS)	-	1000	-
1 (ii) (a) Table 1(Water absorption, 2h soacking (Extrusion Pressed Tubular) XPS)	-	1000	-
1 (ii) Table 1 (b)(Water absorption, 24h soacking (Flat Pressed Single Layer))	-	1000	-
1 (ii) (b) Table 1 (Water absorption, 24h soacking (Flat Pressed Three Layer grade 1))	-	1000	-
1 (ii) (b) Table 1 (Water absorption, 24h soacking (Flat Pressed Three Layer grade 2))	-	1000	-
1 (ii) (b) Table 1 (Water absorption, 24h soacking (Extrusion Pressed Solids) XPS)	-	1000	-
1 (ii) (b) Table 1 (Water absorption, 24h soacking (Extrusion Pressed Tubular) XPS)	-	1000	-
1 (iii) (a) Table 1(Linear expression (swelling in water), Length (Flat Pressed Single Layer))	-	500	-
1 (iii) (a) Table 1(Linear expression (swelling in water), Length (Flat Pressed Three Layer grade 1))	-	500	-
1 (iii) (a) Table 1(Linear expression (swelling in water), Length (Flat Pressed Three Layer grade 2))	-	500	-
1 (iii) (a) Table 1(Linear expression (swelling in water), Length (Extrusion Pressed Solids) XPS)	-	500	-
1 (iii) (a) Table 1(Linear expression (swelling in water), Length (Extrusion Pressed Tubular) XPS)	-	500	-
1 (iii) (b) Table 1(Linear expression (swelling in water), Width (Flat Pressed Single Layer))	-	500	-
1 (iii) (b) Table 1(Linear expression (swelling in water), Width (Flat Pressed Three Layer grade 1))	-	500	-
1 (iii) (b) Table 1(Linear expression (swelling in water), Width (Flat Pressed Three Layer grade 2))	-	500	-
1 (iii) (b) Table 1(Linear expression (swelling in water), Width (Extrusion Pressed Solids) XPS)	-	500	-
1 (iii) (b) Table 1(Linear expression (swelling in water), Width (Extrusion Pressed Tubular) XPS)	-	500	-
1 (iv) Table 1(Thickness swelling, Width (Flat Pressed Single Layer))	-	500	-
1 (iv) Table 1(Thickness swelling, Width (Flat Pressed Three Layer grade 1))	-	500	-
1 (iv) Table 1(Thickness swelling, Width (Flat Pressed Three Layer grade 2))	-	500	-
1 (iv) Table 1(Thickness swelling, Width (Extrusion Pressed Solids) XPS)	-	500	-
1 (iv) Table 1(Thickness swelling, Width (Extrusion Pressed Tubular) XPS)	-	500	-
1 (v) Table 1(Swelling in thickness due to surface absorption, (Flat Pressed Single Layer))	-	1000	-
1 (v) Table 1(Swelling in thickness due to surface absorption, (Flat Pressed Three Layer grade 1))	-	1000	-
1 (v) Table 1(Swelling in thickness due to surface absorption, (Flat Pressed Three Layer grade 2))	-	1000	-
1 (v) Table 1(Swelling in thickness due to surface absorption, (Extrusion Pressed Solids) XPS)	-	1000	-
1 (v) Table 1(Swelling in thickness due to surface absorption, (Extrusion Pressed Tubular) XPS)	-	1000	-
1 (vi) (a), Table 1(Modulus of rupture, Average (Flat Pressed Single Layer))	-	1000	-
1 (vi) (a), Table 1(Modulus of rupture, Average (Flat Pressed Three Layer grade 1))	-	1000	-
1 (vi) (a), Table 1(Modulus of rupture, Average (Flat Pressed Three Layer grade 2))	-	1000	-
1 (vi) (a), Table 1(Modulus of rupture, Average (Extrusion Pressed Solids) XPS)	-	1000	-
1 (vi) (a), Table 1(Modulus of rupture, Average (Extrusion Pressed Tubular) XPS)	-	1000	-
1 (vi) (b), Table 1(Modulus of rupture, Minimum (Flat Pressed Single Layer))	-	1000	-
1 (vi) (b), Table 1(Modulus of rupture, Minimum (Flat Pressed Three Layer grade 1))	-	1000	-
1 (vi) (b), Table 1(Modulus of rupture, Minimum (Flat Pressed Three Layer grade 2))	-	1000	-
1 (vi) (b), Table 1(Modulus of rupture, Minimum (Extrusion Pressed Solids) XPS)	-	1000	-
1 (vi) (b), Table 1(Modulus of rupture, Minimum (Extrusion Pressed Tubular) XPT)	-	1000	-
1 (vii) (a), Table 1(Modulus of elasticity, Average (Flat Pressed Single Layer))	-	1000	-
1 (vii) (a), Table 1(Modulus of elasticity, Average (Flat Pressed Three Layer grade 1))	-	1000	-
1 (vii) (a), Table 1(Modulus of elasticity, Average (Flat Pressed Three Layer grade 2))	-	1000	-
1 (vii) (a), Table 1(Modulus of elasticity, Average (Extrusion Pressed Solids) XPS)	-	1000	-
1 (vii) (a), Table 1(Modulus of elasticity, Average (Extrusion Pressed Tubular) XPT)	-	1000	-
1 (vii) (b), Table 1(Modulus of elasticity, Minimum (Flat Pressed Single Layer))	-	1000	-
1 (vii) (b), Table 1(Modulus of elasticity, Minimum (Flat Pressed Three Layer grade 1))	-	1000	-
1 (vii) (b), Table 1(Modulus of elasticity, Minimum (Flat Pressed Three Layer grade 2))	-	1000	-
1 (vii) (b), Table 1(Modulus of elasticity, Minimum (Extrusion Pressed Solids) XPS)	-	1000	-
1 (vii) (b), Table 1(Modulus of elasticity, Minimum (Extrusion Pressed Tubular) XPT)	-	1000	-
1 (viii) (a), Table 1(Tensile strenath perpendicullr to surface, Upto 20mm thickness (Flat Pressed Single Layer))	-	1000	-
1 (viii) (a), Table 1(Tensile strenath perpendicullr to surface,Upto 20mm thickness (Flat Pressed Three Layer grade 1))	-	1000	-
1 (viii) (a), Table 1(Tensile strenath perpendicullr to surface, Upto 20mm thickness (Flat Pressed Three Layer grade 2))	-	1000	-
1 (viii) (a), Table 1(Tensile strenath perpendicullr to surface, Upto 20mm thickness (Extrusion Pressed Solids) XPS)	-	1000	-
1 (viii) (a), Table 1(Tensile strenath perpendicullr to surface, Upto 20mm thickness (Extrusion Pressed Tubular) XPT)	-	1000	-
1 (viii) (b), Table 1(Tensile strenath perpendicullr to surface, Above 20mm thickness (Flat Pressed Single Layer))	-	1000	-
1 (viii) (b), Table 1(Tensile strenath perpendicullr to surface,Above 20mm thickness (Flat Pressed Three Layer grade 1))	-	1000	-
1 (viii) (b), Table 1(Tensile strenath perpendicullr to surface, Above 20mm thickness (Flat Pressed Three Layer grade 2))	-	1000	-
1 (viii) (b), Table 1(Tensile strenath perpendicullr to surface, Above 20mm thickness (Extrusion Pressed Solids) XPS)	-	1000	-
1 (viii) (b), Table 1(Tensile strenath perpendicullr to surface, Above 20mm thickness (Extrusion Pressed Tubular) XPT)	-	1000	-
1 (i) Table 1(Density Variation (Flat Pressed Single Layer))	-	500	-
1 (i) Table 1(Density Variation (Flat Pressed Three Layer grade 1))	-	500	-
1 (i) Table 1(Density Variation (Flat Pressed Three Layer grade 2))	-	500	-
1 (i) Table 1(Density Variation (Extrusion Pressed Solids) XPS)	-	500	-
1 (i) Table 1(Density Variation (Extrusion Pressed Tubular) XPS)	-	500	-
1 (ii) (a) Table 1(Water absorption, 2h soacking (Flat Pressed Single Layer))	-	1000	-
1 (ii) (a) Table 1(Water absorption, 2h soacking (Flat Pressed Three Layer grade 1))	-	1000	-
1 (ii) (a) Table 1(Water absorption, 2h soacking (Flat Pressed Three Layer grade 2))	-	1000	-
1 (ii) (a) Table 1(Water absorption, 2h soacking (Extrusion Pressed Solids) XPS)	-	1000	-
1 (ii) (a) Table 1(Water absorption, 2h soacking (Extrusion Pressed Tubular) XPS)	-	1000	-
1 (ii) Table 1 (b)(Water absorption, 24h soacking (Flat Pressed Single Layer))	-	1000	-
1 (ii) (b) Table 1 (Water absorption, 24h soacking (Flat Pressed Three Layer grade 1))	-	1000	-
1 (ii) (b) Table 1 (Water absorption, 24h soacking (Flat Pressed Three Layer grade 2))	-	1000	-
1 (ii) (b) Table 1 (Water absorption, 24h soacking (Extrusion Pressed Solids) XPS)	-	1000	-
1 (ii) (b) Table 1 (Water absorption, 24h soacking (Extrusion Pressed Tubular) XPS)	-	1000	-
1 (iii) (a) Table 1(Linear expression (swelling in water), Length (Flat Pressed Single Layer))	-	500	-
1 (iii) (a) Table 1(Linear expression (swelling in water), Length (Flat Pressed Three Layer grade 1))	-	500	-
1 (iii) (a) Table 1(Linear expression (swelling in water), Length (Flat Pressed Three Layer grade 2))	-	500	-
1 (iii) (a) Table 1(Linear expression (swelling in water), Length (Extrusion Pressed Solids) XPS)	-	500	-
1 (iii) (a) Table 1(Linear expression (swelling in water), Length (Extrusion Pressed Tubular) XPS)	-	500	-
1 (iii) (b) Table 1(Linear expression (swelling in water), Width (Flat Pressed Single Layer))	-	500	-
1 (iii) (b) Table 1(Linear expression (swelling in water), Width (Flat Pressed Three Layer grade 1))	-	500	-
1 (iii) (b) Table 1(Linear expression (swelling in water), Width (Flat Pressed Three Layer grade 2))	-	500	-
1 (iii) (b) Table 1(Linear expression (swelling in water), Width (Extrusion Pressed Solids) XPS)	-	500	-
1 (iii) (b) Table 1(Linear expression (swelling in water), Width (Extrusion Pressed Tubular) XPS)	-	500	-
1 (iv) Table 1(Thickness swelling, Width (Flat Pressed Single Layer))	-	500	-
1 (iv) Table 1(Thickness swelling, Width (Flat Pressed Three Layer grade 1))	-	500	-
1 (iv) Table 1(Thickness swelling, Width (Flat Pressed Three Layer grade 2))	-	500	-
1 (iv) Table 1(Thickness swelling, Width (Extrusion Pressed Solids) XPS)	-	500	-
1 (iv) Table 1(Thickness swelling, Width (Extrusion Pressed Tubular) XPS)	-	500	-
1 (v) Table 1(Swelling in thickness due to surface absorption, (Flat Pressed Single Layer))	-	1000	-
1 (v) Table 1(Swelling in thickness due to surface absorption, (Flat Pressed Three Layer grade 1))	-	1000	-
1 (v) Table 1(Swelling in thickness due to surface absorption, (Flat Pressed Three Layer grade 2))	-	1000	-
1 (v) Table 1(Swelling in thickness due to surface absorption, (Extrusion Pressed Solids) XPS)	-	1000	-
1 (v) Table 1(Swelling in thickness due to surface absorption, (Extrusion Pressed Tubular) XPS)	-	1000	-
1 (vi) (a), Table 1(Modulus of rupture, Average (Flat Pressed Single Layer))	-	1000	-
1 (vi) (a), Table 1(Modulus of rupture, Average (Flat Pressed Three Layer grade 1))	-	1000	-
1 (vi) (a), Table 1(Modulus of rupture, Average (Flat Pressed Three Layer grade 2))	-	1000	-
1 (vi) (a), Table 1(Modulus of rupture, Average (Extrusion Pressed Solids) XPS)	-	1000	-
1 (vi) (a), Table 1(Modulus of rupture, Average (Extrusion Pressed Tubular) XPS)	-	1000	-
1 (vi) (b), Table 1(Modulus of rupture, Minimum (Flat Pressed Single Layer))	-	1000	-
1 (vi) (b), Table 1(Modulus of rupture, Minimum (Flat Pressed Three Layer grade 1))	-	1000	-
1 (vi) (b), Table 1(Modulus of rupture, Minimum (Flat Pressed Three Layer grade 2))	-	1000	-
1 (vi) (b), Table 1(Modulus of rupture, Minimum (Extrusion Pressed Solids) XPS)	-	1000	-
1 (vi) (b), Table 1(Modulus of rupture, Minimum (Extrusion Pressed Tubular) XPT)	-	1000	-
1 (vii) (a), Table 1(Modulus of elasticity, Average (Flat Pressed Single Layer))	-	1000	-
1 (vii) (a), Table 1(Modulus of elasticity, Average (Flat Pressed Three Layer grade 1))	-	1000	-
1 (vii) (a), Table 1(Modulus of elasticity, Average (Flat Pressed Three Layer grade 2))	-	1000	-
1 (vii) (a), Table 1(Modulus of elasticity, Average (Extrusion Pressed Solids) XPS)	-	1000	-
1 (vii) (a), Table 1(Modulus of elasticity, Average (Extrusion Pressed Tubular) XPT)	-	1000	-
1 (vii) (b), Table 1(Modulus of elasticity, Minimum (Flat Pressed Single Layer))	-	1000	-
1 (vii) (b), Table 1(Modulus of elasticity, Minimum (Flat Pressed Three Layer grade 1))	-	1000	-
1 (vii) (b), Table 1(Modulus of elasticity, Minimum (Flat Pressed Three Layer grade 2))	-	1000	-
1 (vii) (b), Table 1(Modulus of elasticity, Minimum (Extrusion Pressed Solids) XPS)	-	1000	-
1 (vii) (b), Table 1(Modulus of elasticity, Minimum (Extrusion Pressed Tubular) XPT)	-	1000	-
1 (viii) (a), Table 1(Tensile strenath perpendicullr to surface, Upto 20mm thickness (Flat Pressed Single Layer))	-	1000	-
1 (viii) (a), Table 1(Tensile strenath perpendicullr to surface,Upto 20mm thickness (Flat Pressed Three Layer grade 1))	-	1000	-
1 (viii) (a), Table 1(Tensile strenath perpendicullr to surface, Upto 20mm thickness (Flat Pressed Three Layer grade 2))	-	1000	-
1 (viii) (a), Table 1(Tensile strenath perpendicullr to surface, Upto 20mm thickness (Extrusion Pressed Solids) XPS)	-	1000	-
1 (viii) (a), Table 1(Tensile strenath perpendicullr to surface, Upto 20mm thickness (Extrusion Pressed Tubular) XPT)	-	1000	-
1 (viii) (b), Table 1(Tensile strenath perpendicullr to surface, Above 20mm thickness (Flat Pressed Single Layer))	-	1000	-
1 (viii) (b), Table 1(Tensile strenath perpendicullr to surface,Above 20mm thickness (Flat Pressed Three Layer grade 1))	-	1000	-
1 (viii) (b), Table 1(Tensile strenath perpendicullr to surface, Above 20mm thickness (Flat Pressed Three Layer grade 2))	-	1000	-
1 (viii) (b), Table 1(Tensile strenath perpendicullr to surface, Above 20mm thickness (Extrusion Pressed Solids) XPS)	-	1000	-
1 (viii) (b), Table 1(Tensile strenath perpendicullr to surface, Above 20mm thickness (Extrusion Pressed Tubular) XPT)	-	1000	-
7(Finish)	-	500	-
8.3(Dimensional Tolerances)	-	1500	-
9.2, 11.4(Moisture content)	-	500	-
11.10(screw withdrawal strength)	-	1000	-
Cl-9.6(Workability)	-	500	-
Cl-9.7 (Amendment No-5)(Formaldehyde Content/Emission, Fc)	-	1500	-
Cl-12 (Amendment No 1)(ADDITIONAL REQUIREMENTS FOR ECO MARK)	-	0	-
1 (i) Table 1(Density Variation (Flat Pressed Single Layer))	-	0	-
1 (i) Table 1(Density Variation (Flat Pressed Three Layer grade 1))	-	0	-
1 (i) Table 1(Density Variation (Flat Pressed Three Layer grade 2))	-	0	-
1 (i) Table 1(Density Variation (Extrusion Pressed Solids) XPS)	-	0	-
1 (i) Table 1(Density Variation (Extrusion Pressed Tubular) XPS)	-	0	-
1 (ii) (a) Table 1(Water absorption, 2h soacking (Flat Pressed Single Layer))	-	0	-
1 (ii) (a) Table 1(Water absorption, 2h soacking (Flat Pressed Three Layer grade 1))	-	0	-
1 (ii) (a) Table 1(Water absorption, 2h soacking (Flat Pressed Three Layer grade 2))	-	0	-
1 (ii) (a) Table 1(Water absorption, 2h soacking (Extrusion Pressed Solids) XPS)	-	0	-
1 (ii) (a) Table 1(Water absorption, 2h soacking (Extrusion Pressed Tubular) XPS)	-	0	-
1 (ii) Table 1 (b)(Water absorption, 24h soacking (Flat Pressed Single Layer))	-	0	-
1 (ii) (b) Table 1 (Water absorption, 24h soacking (Flat Pressed Three Layer grade 1))	-	0	-
1 (ii) (b) Table 1 (Water absorption, 24h soacking (Flat Pressed Three Layer grade 2))	-	0	-
1 (ii) (b) Table 1 (Water absorption, 24h soacking (Extrusion Pressed Solids) XPS)	-	0	-
1 (ii) (b) Table 1 (Water absorption, 24h soacking (Extrusion Pressed Tubular) XPS)	-	0	-
1 (iii) (a) Table 1(Linear expression (swelling in water), Length (Flat Pressed Single Layer))	-	0	-
1 (iii) (a) Table 1(Linear expression (swelling in water), Length (Flat Pressed Three Layer grade 1))	-	0	-
1 (iii) (a) Table 1(Linear expression (swelling in water), Length (Flat Pressed Three Layer grade 2))	-	0	-
1 (iii) (a) Table 1(Linear expression (swelling in water), Length (Extrusion Pressed Solids) XPS)	-	0	-
1 (iii) (a) Table 1(Linear expression (swelling in water), Length (Extrusion Pressed Tubular) XPS)	-	0	-
1 (iii) (b) Table 1(Linear expression (swelling in water), Width (Flat Pressed Single Layer))	-	0	-
1 (iii) (b) Table 1(Linear expression (swelling in water), Width (Flat Pressed Three Layer grade 1))	-	0	-
1 (iii) (b) Table 1(Linear expression (swelling in water), Width (Flat Pressed Three Layer grade 2))	-	0	-
1 (iii) (b) Table 1(Linear expression (swelling in water), Width (Extrusion Pressed Solids) XPS)	-	0	-
1 (iii) (b) Table 1(Linear expression (swelling in water), Width (Extrusion Pressed Tubular) XPS)	-	0	-
1 (iv) Table 1(Thickness swelling, Width (Flat Pressed Single Layer))	-	0	-
1 (iv) Table 1(Thickness swelling, Width (Flat Pressed Three Layer grade 1))	-	0	-
1 (iv) Table 1(Thickness swelling, Width (Flat Pressed Three Layer grade 2))	-	0	-
1 (iv) Table 1(Thickness swelling, Width (Extrusion Pressed Solids) XPS)	-	0	-
1 (iv) Table 1(Thickness swelling, Width (Extrusion Pressed Tubular) XPS)	-	0	-
1 (v) Table 1(Swelling in thickness due to surface absorption, (Flat Pressed Single Layer))	-	0	-
1 (v) Table 1(Swelling in thickness due to surface absorption, (Flat Pressed Three Layer grade 1))	-	0	-
1 (v) Table 1(Swelling in thickness due to surface absorption, (Flat Pressed Three Layer grade 2))	-	0	-
1 (v) Table 1(Swelling in thickness due to surface absorption, (Extrusion Pressed Solids) XPS)	-	0	-
1 (v) Table 1(Swelling in thickness due to surface absorption, (Extrusion Pressed Tubular) XPS)	-	0	-
1 (vi) (a), Table 1(Modulus of rupture, Average (Flat Pressed Single Layer))	-	0	-
1 (vi) (a), Table 1(Modulus of rupture, Average (Flat Pressed Three Layer grade 1))	-	0	-
1 (vi) (a), Table 1(Modulus of rupture, Average (Flat Pressed Three Layer grade 2))	-	0	-
1 (vi) (a), Table 1(Modulus of rupture, Average (Extrusion Pressed Solids) XPS)	-	0	-
1 (vi) (a), Table 1(Modulus of rupture, Average (Extrusion Pressed Tubular) XPS)	-	0	-
1 (vi) (b), Table 1(Modulus of rupture, Minimum (Flat Pressed Single Layer))	-	0	-
1 (vi) (b), Table 1(Modulus of rupture, Minimum (Flat Pressed Three Layer grade 1))	-	0	-
1 (vi) (b), Table 1(Modulus of rupture, Minimum (Flat Pressed Three Layer grade 2))	-	0	-
1 (vi) (b), Table 1(Modulus of rupture, Minimum (Extrusion Pressed Solids) XPS)	-	0	-
1 (vi) (b), Table 1(Modulus of rupture, Minimum (Extrusion Pressed Tubular) XPT)	-	0	-
1 (vii) (a), Table 1(Modulus of elasticity, Average (Flat Pressed Single Layer))	-	0	-
1 (vii) (a), Table 1(Modulus of elasticity, Average (Flat Pressed Three Layer grade 1))	-	0	-
1 (vii) (a), Table 1(Modulus of elasticity, Average (Flat Pressed Three Layer grade 2))	-	0	-
1 (vii) (a), Table 1(Modulus of elasticity, Average (Extrusion Pressed Solids) XPS)	-	0	-
1 (vii) (a), Table 1(Modulus of elasticity, Average (Extrusion Pressed Tubular) XPT)	-	0	-
1 (vii) (b), Table 1(Modulus of elasticity, Minimum (Flat Pressed Single Layer))	-	0	-
1 (vii) (b), Table 1(Modulus of elasticity, Minimum (Flat Pressed Three Layer grade 1))	-	0	-
1 (vii) (b), Table 1(Modulus of elasticity, Minimum (Flat Pressed Three Layer grade 2))	-	0	-
1 (vii) (b), Table 1(Modulus of elasticity, Minimum (Extrusion Pressed Solids) XPS)	-	0	-
1 (vii) (b), Table 1(Modulus of elasticity, Minimum (Extrusion Pressed Tubular) XPT)	-	0	-
1 (viii) (a), Table 1(Tensile strenath perpendicullr to surface, Upto 20mm thickness (Flat Pressed Single Layer))	-	0	-
1 (viii) (a), Table 1(Tensile strenath perpendicullr to surface,Upto 20mm thickness (Flat Pressed Three Layer grade 1))	-	0	-
1 (viii) (a), Table 1(Tensile strenath perpendicullr to surface, Upto 20mm thickness (Flat Pressed Three Layer grade 2))	-	0	-
1 (viii) (a), Table 1(Tensile strenath perpendicullr to surface, Upto 20mm thickness (Extrusion Pressed Solids) XPS)	-	0	-
1 (viii) (a), Table 1(Tensile strenath perpendicullr to surface, Upto 20mm thickness (Extrusion Pressed Tubular) XPT)	-	0	-
1 (viii) (b), Table 1(Tensile strenath perpendicullr to surface, Above 20mm thickness (Flat Pressed Single Layer))	-	0	-
1 (viii) (b), Table 1(Tensile strenath perpendicullr to surface,Above 20mm thickness (Flat Pressed Three Layer grade 1))	-	0	-
1 (viii) (b), Table 1(Tensile strenath perpendicullr to surface, Above 20mm thickness (Flat Pressed Three Layer grade 2))	-	0	-
1 (viii) (b), Table 1(Tensile strenath perpendicullr to surface, Above 20mm thickness (Extrusion Pressed Solids) XPS)	-	0	-
1 (viii) (b), Table 1(Tensile strenath perpendicullr to surface, Above 20mm thickness (Extrusion Pressed Tubular) XPT)	-	0	-
1 (i) Table 1(Density Variation (Flat Pressed Single Layer))	-	0	-
1 (i) Table 1(Density Variation (Flat Pressed Three Layer grade 1))	-	0	-
1 (i) Table 1(Density Variation (Flat Pressed Three Layer grade 2))	-	0	-
1 (i) Table 1(Density Variation (Extrusion Pressed Solids) XPS)	-	0	-
1 (i) Table 1(Density Variation (Extrusion Pressed Tubular) XPS)	-	0	-
1 (ii) (a) Table 1(Water absorption, 2h soacking (Flat Pressed Single Layer))	-	0	-
1 (ii) (a) Table 1(Water absorption, 2h soacking (Flat Pressed Three Layer grade 1))	-	0	-
1 (ii) (a) Table 1(Water absorption, 2h soacking (Flat Pressed Three Layer grade 2))	-	0	-
1 (ii) (a) Table 1(Water absorption, 2h soacking (Extrusion Pressed Solids) XPS)	-	0	-
1 (ii) (a) Table 1(Water absorption, 2h soacking (Extrusion Pressed Tubular) XPS)	-	0	-
1 (ii) Table 1 (b)(Water absorption, 24h soacking (Flat Pressed Single Layer))	-	0	-
1 (ii) (b) Table 1 (Water absorption, 24h soacking (Flat Pressed Three Layer grade 1))	-	0	-
1 (ii) (b) Table 1 (Water absorption, 24h soacking (Flat Pressed Three Layer grade 2))	-	0	-
1 (ii) (b) Table 1 (Water absorption, 24h soacking (Extrusion Pressed Solids) XPS)	-	0	-
1 (ii) (b) Table 1 (Water absorption, 24h soacking (Extrusion Pressed Tubular) XPS)	-	0	-
1 (iii) (a) Table 1(Linear expression (swelling in water), Length (Flat Pressed Single Layer))	-	0	-
1 (iii) (a) Table 1(Linear expression (swelling in water), Length (Flat Pressed Three Layer grade 1))	-	0	-
1 (iii) (a) Table 1(Linear expression (swelling in water), Length (Flat Pressed Three Layer grade 2))	-	0	-
1 (iii) (a) Table 1(Linear expression (swelling in water), Length (Extrusion Pressed Solids) XPS)	-	0	-
1 (iii) (a) Table 1(Linear expression (swelling in water), Length (Extrusion Pressed Tubular) XPS)	-	0	-
1 (iii) (b) Table 1(Linear expression (swelling in water), Width (Flat Pressed Single Layer))	-	0	-
1 (iii) (b) Table 1(Linear expression (swelling in water), Width (Flat Pressed Three Layer grade 1))	-	0	-
1 (iii) (b) Table 1(Linear expression (swelling in water), Width (Flat Pressed Three Layer grade 2))	-	0	-
1 (iii) (b) Table 1(Linear expression (swelling in water), Width (Extrusion Pressed Solids) XPS)	-	0	-
1 (iii) (b) Table 1(Linear expression (swelling in water), Width (Extrusion Pressed Tubular) XPS)	-	0	-
1 (iv) Table 1(Thickness swelling, Width (Flat Pressed Single Layer))	-	0	-
1 (iv) Table 1(Thickness swelling, Width (Flat Pressed Three Layer grade 1))	-	0	-
1 (iv) Table 1(Thickness swelling, Width (Flat Pressed Three Layer grade 2))	-	0	-
1 (iv) Table 1(Thickness swelling, Width (Extrusion Pressed Solids) XPS)	-	0	-
1 (iv) Table 1(Thickness swelling, Width (Extrusion Pressed Tubular) XPS)	-	0	-
1 (v) Table 1(Swelling in thickness due to surface absorption, (Flat Pressed Single Layer))	-	0	-
1 (v) Table 1(Swelling in thickness due to surface absorption, (Flat Pressed Three Layer grade 1))	-	0	-
1 (v) Table 1(Swelling in thickness due to surface absorption, (Flat Pressed Three Layer grade 2))	-	0	-
1 (v) Table 1(Swelling in thickness due to surface absorption, (Extrusion Pressed Solids) XPS)	-	0	-
1 (v) Table 1(Swelling in thickness due to surface absorption, (Extrusion Pressed Tubular) XPS)	-	0	-
1 (vi) (a), Table 1(Modulus of rupture, Average (Flat Pressed Single Layer))	-	0	-
1 (vi) (a), Table 1(Modulus of rupture, Average (Flat Pressed Three Layer grade 1))	-	0	-
1 (vi) (a), Table 1(Modulus of rupture, Average (Flat Pressed Three Layer grade 2))	-	0	-
1 (vi) (a), Table 1(Modulus of rupture, Average (Extrusion Pressed Solids) XPS)	-	0	-
1 (vi) (a), Table 1(Modulus of rupture, Average (Extrusion Pressed Tubular) XPS)	-	0	-
1 (vi) (b), Table 1(Modulus of rupture, Minimum (Flat Pressed Single Layer))	-	0	-
1 (vi) (b), Table 1(Modulus of rupture, Minimum (Flat Pressed Three Layer grade 1))	-	0	-
1 (vi) (b), Table 1(Modulus of rupture, Minimum (Flat Pressed Three Layer grade 2))	-	0	-
1 (vi) (b), Table 1(Modulus of rupture, Minimum (Extrusion Pressed Solids) XPS)	-	0	-
1 (vi) (b), Table 1(Modulus of rupture, Minimum (Extrusion Pressed Tubular) XPT)	-	0	-
1 (vii) (a), Table 1(Modulus of elasticity, Average (Flat Pressed Single Layer))	-	0	-
1 (vii) (a), Table 1(Modulus of elasticity, Average (Flat Pressed Three Layer grade 1))	-	0	-
1 (vii) (a), Table 1(Modulus of elasticity, Average (Flat Pressed Three Layer grade 2))	-	0	-
1 (vii) (a), Table 1(Modulus of elasticity, Average (Extrusion Pressed Solids) XPS)	-	0	-
1 (vii) (a), Table 1(Modulus of elasticity, Average (Extrusion Pressed Tubular) XPT)	-	0	-
1 (vii) (b), Table 1(Modulus of elasticity, Minimum (Flat Pressed Single Layer))	-	0	-
1 (vii) (b), Table 1(Modulus of elasticity, Minimum (Flat Pressed Three Layer grade 1))	-	0	-
1 (vii) (b), Table 1(Modulus of elasticity, Minimum (Flat Pressed Three Layer grade 2))	-	0	-
1 (vii) (b), Table 1(Modulus of elasticity, Minimum (Extrusion Pressed Solids) XPS)	-	0	-
1 (vii) (b), Table 1(Modulus of elasticity, Minimum (Extrusion Pressed Tubular) XPT)	-	0	-
1 (viii) (a), Table 1(Tensile strenath perpendicullr to surface, Upto 20mm thickness (Flat Pressed Single Layer))	-	0	-
1 (viii) (a), Table 1(Tensile strenath perpendicullr to surface,Upto 20mm thickness (Flat Pressed Three Layer grade 1))	-	0	-
1 (viii) (a), Table 1(Tensile strenath perpendicullr to surface, Upto 20mm thickness (Flat Pressed Three Layer grade 2))	-	0	-
1 (viii) (a), Table 1(Tensile strenath perpendicullr to surface, Upto 20mm thickness (Extrusion Pressed Solids) XPS)	-	0	-
1 (viii) (a), Table 1(Tensile strenath perpendicullr to surface, Upto 20mm thickness (Extrusion Pressed Tubular) XPT)	-	0	-
1 (viii) (b), Table 1(Tensile strenath perpendicullr to surface, Above 20mm thickness (Flat Pressed Single Layer))	-	0	-
1 (viii) (b), Table 1(Tensile strenath perpendicullr to surface,Above 20mm thickness (Flat Pressed Three Layer grade 1))	-	0	-
1 (viii) (b), Table 1(Tensile strenath perpendicullr to surface, Above 20mm thickness (Flat Pressed Three Layer grade 2))	-	0	-
1 (viii) (b), Table 1(Tensile strenath perpendicullr to surface, Above 20mm thickness (Extrusion Pressed Solids) XPS)	-	0	-
1 (viii) (b), Table 1(Tensile strenath perpendicullr to surface, Above 20mm thickness (Extrusion Pressed Tubular) XPT)	-	0	-
7(Finish)	-	0	-
8.3(Dimensional Tolerances)	-	0	-
9.2, 11.4(Moisture content)	-	0	-
11.10(screw withdrawal strength)	-	0	-
Cl-9.6(Workability)	-	0	-
Cl-9.7 (Amendment No-5)(Formaldehyde Content/Emission, Fc)	-	0	-
Cl-12 (Amendment No 1)(ADDITIONAL REQUIREMENTS FOR ECO MARK)	-	0	-

27 May, 2028

-
Included w.e.f.18.07.2025 Exclusion Cl-9.7.2 (Amendment No-5) (Steady State Formaldehyde Emission Value)

IS 14587 (2023)

Prelaminated Medium Density Fibre Board - Specification

Geade 1/Grade 2/ upto 2440 mm Length

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5.1(Medium Density Fibre (MDF) Board)	-	0	-
Cl-7(Finish)	-	500	-
Cl-8.1(Dimensions of prelaminated MDF)	-	1500	-
Cl-8.2(Tolerances)	-	1500	-
Cl-8.2.1(Edge straightness)	-	1500	upto 2440 mm length
Cl-9.1 S.No-(1), i(Density, kg/m3)	-	500	-
Cl-9.1 S.No-(1), ii(Variation from mean density, percent)	-	500	-
Cl-9.1 S.No-(1), iii(Moisture content, percent)	-	500	-
Cl-9.1 S.No-(1), v(Linear expansion (thickness swelling in water), due to general absorption after 24 h soaking, percent, Max)	-	1000	-
Cl-9.1 S.No-(1), vi(Internal bond strength, N/mm2, Min)	-	1000	-
Cl-9.1 S.No-(1), vii,a(After cyclic test)	-	1000	-
Cl-9.1 S.No-(1), vii,b(After accelerated water resistance test)	-	1000	-
Cl-9.1 S.No-(1), viii(Modulus of rupture, N/mm2 , Min)	-	1000	-
Cl-9.1 S.No-(1), ix(Modulus of elasticity, N/mm2 , Min)	-	1000	-
Cl-9.1 S.No-(1), x,(Screw withdrawal strength, ????????, Min)	-	1000	-
Cl-9.1 S.No-(1), xi(Formaldehyde content (Fc), mg/100 g for oven dry board)	-	1500	-
Cl-9.1 S.No-(1), xiii(Abrasion resistance in number of revolutions, Min, (Type 1 to 4))	-	1000	-
Cl-9.1 S.No-(1), xiv(Resistance to steam/water vapours)	-	500	-
Cl-9.1 S.No-(1), xv(Resistance to crack)	-	1000	-
Cl-9.1 S.No-(1), xvi(Resistance to a cigarette burn)	-	500	-
Cl-9.1 S.No-(1), xvii(Resistance to stain)	-	500	-
Cl-11.2(Specific Requirement)	-	0	-
Cl-12(Marking)	-	0	-
Cl-5.2(Impregnated Base Paper)	-	0	-
Cl-5.3(Impregnated Overlay)	-	0	-
Cl-9.1 S.No-(1), iv(Variation from mean moisture content, percent (absolute))	-	500	-
Cl-5.1(Medium Density Fibre (MDF) Board)	-	0	-
Cl-7(Finish)	-	0	-
Cl-8.1(Dimensions of prelaminated MDF)	-	0	-
Cl-8.2(Tolerances)	-	0	-
Cl-8.2.1(Edge straightness)	-	0	upto 2440 mm length
Cl-9.1 S.No-(1), i(Density, kg/m3)	-	0	-
Cl-9.1 S.No-(1), ii(Variation from mean density, percent)	-	0	-
Cl-9.1 S.No-(1), iii(Moisture content, percent)	-	0	-
Cl-9.1 S.No-(1), v(Linear expansion (thickness swelling in water), due to general absorption after 24 h soaking, percent, Max)	-	0	-
Cl-9.1 S.No-(1), vi(Internal bond strength, N/mm2, Min)	-	0	-
Cl-9.1 S.No-(1), vii,a(After cyclic test)	-	0	-
Cl-9.1 S.No-(1), vii,b(After accelerated water resistance test)	-	0	-
Cl-9.1 S.No-(1), viii(Modulus of rupture, N/mm2 , Min)	-	0	-
Cl-9.1 S.No-(1), ix(Modulus of elasticity, N/mm2 , Min)	-	0	-
Cl-9.1 S.No-(1), x,(Screw withdrawal strength, ????????, Min)	-	0	-
Cl-9.1 S.No-(1), xi(Formaldehyde content (Fc), mg/100 g for oven dry board)	-	0	-
Cl-9.1 S.No-(1), xiii(Abrasion resistance in number of revolutions, Min, (Type 1 to 4))	-	0	-
Cl-9.1 S.No-(1), xiv(Resistance to steam/water vapours)	-	0	-
Cl-9.1 S.No-(1), xv(Resistance to crack)	-	0	-
Cl-9.1 S.No-(1), xvi(Resistance to a cigarette burn)	-	0	-
Cl-9.1 S.No-(1), xvii(Resistance to stain)	-	0	-
Cl-11.2(Specific Requirement)	-	0	-
Cl-12(Marking)	-	0	-
Cl-5.2(Impregnated Base Paper)	-	0	-
Cl-5.3(Impregnated Overlay)	-	0	-
Cl-9.1 S.No-(1), iv(Variation from mean moisture content, percent (absolute))	-	0	-

27 May, 2028

-
included w.e.f.04.08.2025 Exclusion Cl-9.1 S.No-(1), xii (Steady-state formaldehyde emission (Fc), mg/m3)

IS 1328 (1996)

Veneered Decorative Plywood -Specification

MR/BWR

4000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Grade - For BWR)	-	0	-
4.1(Grade - For MR)	-	0	-
4.2(Type - For Type 1)	-	0	-
4.2(Type - For Type 2)	-	0	-
7.1.1(Requirements - Open splits, checks or open joints - For Type 1 - Cl. 7.1.1)	-	500	-
7.2.1(Requirements - Open splits, checks or open joints - For Type 2 - Cl. 7.2.1)	-	500	-
7.1.2(Requirements - Other defects - For Type 1 - Cl. 7.1.2)	-	500	-
7.2.2(Requirements - Other defects - For Type 2 - Cl. 7.2.2.)	-	500	-
7.1.3(Requirements - Other Charcteristics and Manufacturing Defects - For Type 1 - Cl. 7.1.3)	-	500	-
7.2.3(Requirements - Other Charcteristics and Manufacturing Defects - For Type 2 - Cl. 7.2.3)	-	500	-
8(Dimensions & Tolerances - Length - Cl. 8)	-	300	-
8(Dimensions & Tolerances - Width - Cl. 8)	-	300	-
8(Dimensions & Tolerances - Thickness - Cl. 8)	-	300	-
8(Dimensions & Tolerances - Edge Straightness - Annexure C)	-	300	-
8(Dimensions & Tolerances - Squareness - Annexure C)	-	300	-
9(Finish - Cl. 9.1, 8.3)	-	500	-
9(Finish - Cl. 9.2, 8.3)	-	500	-
11(Tests - Moisture Content - Part 1 of IS 1734)	-	500	-
11(Tests - Water Resistance Test - Cl. 11.1.2.1 [for MR Grade])	-	1000	-
11(Tests - Water Resistance Test - Cl. 11.1.2.2 [for BWR Grade])	-	1000	-
6.1(Decorative Veneers (Thickness))	-	0	-
4.1(Grade - For BWR)	-	0	-
4.1(Grade - For MR)	-	0	-
4.2(Type - For Type 1)	-	0	-
4.2(Type - For Type 2)	-	0	-
7.1.1(Requirements - Open splits, checks or open joints - For Type 1 - Cl. 7.1.1)	-	0	-
7.2.1(Requirements - Open splits, checks or open joints - For Type 2 - Cl. 7.2.1)	-	0	-
7.1.2(Requirements - Other defects - For Type 1 - Cl. 7.1.2)	-	0	-
7.2.2(Requirements - Other defects - For Type 2 - Cl. 7.2.2.)	-	0	-
7.1.3(Requirements - Other Charcteristics and Manufacturing Defects - For Type 1 - Cl. 7.1.3)	-	0	-
7.2.3(Requirements - Other Charcteristics and Manufacturing Defects - For Type 2 - Cl. 7.2.3)	-	0	-
8(Dimensions & Tolerances - Length - Cl. 8)	-	0	-
8(Dimensions & Tolerances - Width - Cl. 8)	-	0	-
8(Dimensions & Tolerances - Thickness - Cl. 8)	-	0	-
8(Dimensions & Tolerances - Edge Straightness - Annexure C)	-	0	-
8(Dimensions & Tolerances - Squareness - Annexure C)	-	0	-
9(Finish - Cl. 9.1, 8.3)	-	0	-
9(Finish - Cl. 9.2, 8.3)	-	0	-
11(Tests - Moisture Content - Part 1 of IS 1734)	-	0	-
11(Tests - Water Resistance Test - Cl. 11.1.2.1 [for MR Grade])	-	0	-
11(Tests - Water Resistance Test - Cl. 11.1.2.2 [for BWR Grade])	-	0	-
6.1(Decorative Veneers (Thickness))	-	0	-

27 May, 2028

-
Included w.e.f.19.05.2025

IS 4990 (2024)

PLYWOOD FOR CONCRETE SHUTTERING WORKS SPECIFICATION (Fourth Revision)

BWP/CS/CSC/CSFF/E1/E2

14500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5.1(Timber)	-	0	-
Cl-5.2(Adhesives for Bonding of Veneers)	-	0	-
Cl-6.1(Manufacture)	-	0	-
Cl-6.2(Manufacture ( Thickness of veneers))	-	0	-
Cl-6.3(Manufacture ( Physical and mechanical properties of veneers))	-	0	-
Cl-6.4, 6.7(Manufacture (Plywood for concrete shuttering))	-	0	-
Cl-6.5(Manufacture (Scarf joints))	-	0	-
Cl-6.6(Manufacture ( Preservative treatment))	-	0	-
Cl-7.1(Dimensions -length)	-	500	-
Cl-7.2(Thickness)	-	500	-
Cl-7.3(Squareness)	-	500	-
Cl-8.1, 8.2(Workmanship and finish)	-	0	-
Cl-10.3(Moisture Content)	-	500	-
Cl-10.4.1(Glue Adhesion in Dry State - Glue Shear Strength-WOOD FAILURE, Average)	-	500	-
Cl-10.4.2(Glue Adhesion in Dry State - Adhesion of Plies)	-	500	-
Cl-10.5, 10.5.1(Resistance to water test- glue shear strength- WOOD Failure, Average)	-	500	-
Cl-10.5.1.1(Water Resistance Test-Glue shear strength)	-	1000	-
Cl-10.5.1.2(Water Resistance Test-Adhesion of plies)	-	500	-
Cl-10.6(Water resistance test (Concrete shuttering Plywood))	-	500	-
Cl-10.7.1, Table-2(Mycological Test- Glue shear strengt)	-	1000	-
Cl-10.7.2(Mycological Test- Adhesion of plies)	-	1000	-
Cl-10.8(Tensile Strength)	-	1000	-
Cl-10.9, Table-3 (i)(Along (parallel to the grain direction of the face veneer))	-	500	-
Cl-10.9, Table-3 (ii)(Across (perpendicular to the grain direction of the face veneer))	-	500	-
Cl-10.10, Table-4 (i) a((Modulus of Elasticity: Across the Face Grain: Average) Wet Bending)	-	1000	-
Cl-10.10, Table-4 (i) b((Modulus of Rupture: Across the Face Grain: Minimum Individual) Wet Bending)	-	1000	-
Cl-10.11(Retention of Preservative)	-	1500	-
Cl-10.12(Formaldehyde Content Test)	-	1500	-

27 May, 2028

-
Included w.e.f.19.05.2025 Exclusion Cl-10.5.2 (Water Resistance Test (Alternate method)) Cl-10.13 (Steady-State Formaldehyde Emission Test)

IS 710 (2024)

MARINE PLYWOOD - SPECIFICATION (Third Revision)

BWP/E1/E2

14500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4.1(Timber)	-	0	-
Cl-4.2(Adhesive)	-	0	-
Cl-5.1(Veneers)	-	0	-
Cl-5.2.1(Glueing)	-	0	-
Cl -5.2.2(Thickness of Veneers)	-	0	-
Cl - 5.2.3.1(Joint in Veneers)	-	0	-
Cl - 5.2.3.2(Edge joints)	-	0	-
Cl - 5.2.3.3(End joints)	-	0	-
Cl - 5.2.3.4(Scarf joints)	-	0	-
Cl - 5.2.4(Grain Direction)	-	0	-
Cl-5.3(Treatment)	-	0	-
Cl-5.4(Moisture Content)	-	0	-
Cl-6.1(Dimensions (length))	-	1500	-
Cl-6.2(Thickness)	-	1500	-
Cl-6.3(Squareness)	-	1500	-
Cl-7.1, 7.2, 7.3, 7.4, 7.5 & 7.6(Workmanship and finish)	-	500	-
Cl-9.3(Moisture Content)	-	500	-
Cl-9.4.2(Glue Adhesion in Dry State- Adhesion of Plies)	-	500	-
Cl-9.4.1(Glue Adhesion in Dry State- Glue Shear Strength -Average)	-	500	-
Cl-9.5.1.1(Glue Adhesion in Water Resistance - Glue Shear Strength -Average)	-	1000	-
Cl-9.5.1.2(Water Resistance Test-Adhesion of plies)	-	1000	-
Cl-9.6(Tensile Strength-Along the grain)	-	1000	-
Cl-9.7(Mycological Test -Adhesion)	-	2000	-
Cl-9.8, Table-2(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-	500	-
Cl-9.8, Table-2(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-	500	-
Cl-9.9, Table-3 (i) a((Modulus of Elasticity: Across the Face Grain: Average) Wet Bending)	-	1000	-
Cl-9.9, Table-3 (i) b((Modulus of Elasticity: Across the Face Grain: Minimum Individual) Wet Bending)	-	1000	-
Cl-9.10(Retention of Preservative)	-	1500	-
Cl-9.11(Formaldehyde Content Test)	-	1500	-
Cl-9.4.2(Adhesion of Plies)	-	500	-
5.1.1(Defects in veneers)	-	0	-

27 May, 2028

-
Included w.e.f.19.05.2025 Exclusion Cl-9.5.2 (Water Resistance Test) Cl-9.12 (Steady-State Formaldehyde Emission Test)

IS 303 (2024)

Plywood for General Purposes â Specification (Fourth Revision)

MR/BWR/BWP/AA/AB/CC/E1/E2

6200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5.1(Classification by appearance)	-	200	-
Cl-5.2, Table- 1 (i)(Blister)	-	200	-
Cl-5.2, Table- 1 (ii)(Checks)	-	200	-
Cl-5.2, Table- 1 (iii)(Discolouration)	-	200	-
Cl-5.2, Table- 1 (iv)(Dote)	-	200	-
Cl-5.2, Table- 1 (v)(Insect hole)	-	200	-
Cl-5.2, Table- 1 (vi)(Joints)	-	200	-
Cl-5.2, Table- 1 (vii)(Knots (dead))	-	200	-
Cl-5.2, Table- 1 (viii)(Pin knots (dead))	-	200	-
Cl-5.2, Table- 1 (ix)(Pin knots (live))	-	200	-
Cl-5.2, Table- 1 (x)(Knots (tight))	-	200	-
Cl-5.2, Table- 1 (xi)(Patches)	-	200	-
Cl-5.2, Table- 1 (xii)(Splits)	-	200	-
Cl-5.2, Table- 1 (xiii)(Swirl)	-	200	-
Cl-5.2, Table-2(Maximum Number of Categories of Permissible Defects, per m2)	-	200	-
Cl-6.1(Timber)	-	200	-
Cl-6.2(Adhesive)	-	200	-
Cl-7.2.1(Thickness of veneers)	-	200	-
Cl-7.2.3(Grain Direction)	-	200	-
Cl-7.2.5.1(Gaps in cores and cross-bands)	-	200	-
Cl-7.2.5.2(Splits)	-	200	-
Cl-7.2.5.3(Overlap)	-	200	-
Cl-8.1(Dimensions -length)	-	1000	-
Cl-8.2(Thickness of the plywood boards)	-	1000	-
Cl-8.3(Squareness)	-	1000	-
Cl-11.3.1, 11.3.1.1(Water Resistance Test)	-	1000	-
Cl-11.3.2(Mycological Test)	-	1000	-
Cl-11.4(Moisture Content)	-	500	-
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-	1000	-
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-	1000	-
Cl-11.6(Formaldehyde Content Test)	-	1500	-
Cl-9(WORKMANSHIP AND FINISH)	-	200	-
Cl-7.2.4(Scarf Joints)	-	200	-
Cl-5.1(Classification by appearance)	-	200	-
Cl-5.2, Table- 1 (i)(Blister)	-	200	-
Cl-5.2, Table- 1 (ii)(Checks)	-	200	-
Cl-5.2, Table- 1 (iii)(Discolouration)	-	200	-
Cl-5.2, Table- 1 (iv)(Dote)	-	200	-
Cl-5.2, Table- 1 (v)(Insect hole)	-	200	-
Cl-5.2, Table- 1 (vi)(Joints)	-	200	-
Cl-5.2, Table- 1 (vii)(Knots (dead))	-	200	-
Cl-5.2, Table- 1 (viii)(Pin knots (dead))	-	200	-
Cl-5.2, Table- 1 (ix)(Pin knots (live))	-	200	-
Cl-5.2, Table- 1 (x)(Knots (tight))	-	200	-
Cl-5.2, Table- 1 (xi)(Patches)	-	200	-
Cl-5.2, Table- 1 (xii)(Splits)	-	200	-
Cl-5.2, Table- 1 (xiii)(Swirl)	-	200	-
Cl-5.2, Table-2(Maximum Number of Categories of Permissible Defects, per m2)	-	200	-
Cl-6.1(Timber)	-	200	-
Cl-6.2(Adhesive)	-	200	-
Cl-7.2.1(Thickness of veneers)	-	200	-
Cl-7.2.3(Grain Direction)	-	200	-
Cl-7.2.5.1(Gaps in cores and cross-bands)	-	200	-
Cl-7.2.5.2(Splits)	-	200	-
Cl-7.2.5.3(Overlap)	-	200	-
Cl-8.1(Dimensions -length)	-	1000	-
Cl-8.2(Thickness of the plywood boards)	-	1000	-
Cl-8.3(Squareness)	-	1000	-
Cl-11.3.1, 11.3.1.1(Water Resistance Test)	-	1000	-
Cl-11.3.2(Mycological Test)	-	1000	-
Cl-11.4(Moisture Content)	-	500	-
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-	1000	-
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-	1000	-
Cl-11.6(Formaldehyde Content Test)	-	1500	-
Cl-9(WORKMANSHIP AND FINISH)	-	200	-
Cl-7.2.4(Scarf Joints)	-	200	-
Cl-5.1(Classification by appearance)	-	200	-
Cl-5.2, Table- 1 (i)(Blister)	-	200	-
Cl-5.2, Table- 1 (ii)(Checks)	-	200	-
Cl-5.2, Table- 1 (iii)(Discolouration)	-	200	-
Cl-5.2, Table- 1 (iv)(Dote)	-	200	-
Cl-5.2, Table- 1 (v)(Insect hole)	-	200	-
Cl-5.2, Table- 1 (vi)(Joints)	-	200	-
Cl-5.2, Table- 1 (vii)(Knots (dead))	-	200	-
Cl-5.2, Table- 1 (viii)(Pin knots (dead))	-	200	-
Cl-5.2, Table- 1 (ix)(Pin knots (live))	-	200	-
Cl-5.2, Table- 1 (x)(Knots (tight))	-	200	-
Cl-5.2, Table- 1 (xi)(Patches)	-	200	-
Cl-5.2, Table- 1 (xii)(Splits)	-	200	-
Cl-5.2, Table- 1 (xiii)(Swirl)	-	200	-
Cl-5.2, Table-2(Maximum Number of Categories of Permissible Defects, per m2)	-	200	-
Cl-6.1(Timber)	-	200	-
Cl-6.2(Adhesive)	-	200	-
Cl-7.2.1(Thickness of veneers)	-	200	-
Cl-7.2.3(Grain Direction)	-	200	-
Cl-7.2.5.1(Gaps in cores and cross-bands)	-	200	-
Cl-7.2.5.2(Splits)	-	200	-
Cl-7.2.5.3(Overlap)	-	200	-
Cl-8.1(Dimensions -length)	-	1000	-
Cl-8.2(Thickness of the plywood boards)	-	1000	-
Cl-8.3(Squareness)	-	1000	-
Cl-11.3.1, 11.3.1.1(Water Resistance Test)	-	1000	-
Cl-11.3.2(Mycological Test)	-	1000	-
Cl-11.4(Moisture Content)	-	500	-
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-	1000	-
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-	1000	-
Cl-11.6(Formaldehyde Content Test)	-	1500	-
Cl-9(WORKMANSHIP AND FINISH)	-	200	-
Cl-7.2.4(Scarf Joints)	-	200	-
Cl-5.1(Classification by appearance)	-	-	-
Cl-5.2, Table- 1 (i)(Blister)	-	-	-
Cl-5.2, Table- 1 (ii)(Checks)	-	-	-
Cl-5.2, Table- 1 (iii)(Discolouration)	-	-	-
Cl-5.2, Table- 1 (iv)(Dote)	-	-	-
Cl-5.2, Table- 1 (v)(Insect hole)	-	-	-
Cl-5.2, Table- 1 (vi)(Joints)	-	-	-
Cl-5.2, Table- 1 (vii)(Knots (dead))	-	-	-
Cl-5.2, Table- 1 (viii)(Pin knots (dead))	-	-	-
Cl-5.2, Table- 1 (ix)(Pin knots (live))	-	-	-
Cl-5.2, Table- 1 (x)(Knots (tight))	-	-	-
Cl-5.2, Table- 1 (xi)(Patches)	-	-	-
Cl-5.2, Table- 1 (xii)(Splits)	-	-	-
Cl-5.2, Table- 1 (xiii)(Swirl)	-	-	-
Cl-5.2, Table-2(Maximum Number of Categories of Permissible Defects, per m2)	-	-	-
Cl-6.1(Timber)	-	-	-
Cl-6.2(Adhesive)	-	-	-
Cl-7.2.1(Thickness of veneers)	-	-	-
Cl-7.2.3(Grain Direction)	-	-	-
Cl-7.2.5.1(Gaps in cores and cross-bands)	-	-	-
Cl-7.2.5.2(Splits)	-	-	-
Cl-7.2.5.3(Overlap)	-	-	-
Cl-8.1(Dimensions -length)	-	-	-
Cl-8.2(Thickness of the plywood boards)	-	-	-
Cl-8.3(Squareness)	-	-	-
Cl-11.3.1, 11.3.1.1(Water Resistance Test)	-	-	-
Cl-11.3.2(Mycological Test)	-	-	-
Cl-11.4(Moisture Content)	-	-	-
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-	-	-
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-	-	-
Cl-11.6(Formaldehyde Content Test)	-	-	-
Cl-9(WORKMANSHIP AND FINISH)	-	-	-
Cl-7.2.4(Scarf Joints)	-	-	-

27 May, 2028

-
Included w.e.f.19.05.2025 Exclusion Cl-11.7 (Steady-State Formaldehyde Emission Test)

Bureau of Indian Standards

The National Standards Body of India

EKO PRO ENGINEERS PRIVATE LIMITED (32/37) GHAZIABAD

32/37, SOUTH SIDE OF G.T ROAD, INDUSTRIAL AREA, Ghaziabad, Uttar Pradesh, Ghaziabad, Ghaziabad, Uttar Pradesh, 201009

9810243870 labs@ekopro.in

Scope List