BIS - LIMS (Laboratory Information Management System)

ELECTRONICS REGIONAL TEST LABORATORY (EAST)

BLOCK-DN;SECTOR-V;SALT LAKE CITY KOLKATA-700 091., KOLKATA, 24 PARAGANAS NORTH, West Bengal, 700091

9830786241 ertleast@stqc.gov.in

Scope List

Reset

17 Results

S.No.

Indian Standard No.

Product

Exclusion

Testing Charges (Excl. Of Taxes)

Facility Type

Effective Date

Validity Date

Remark

IS 14697 (2021)

ac STATIC TRANSFORMER OPERATED WATTHOUR METERS CLASS 02 S AND 05 S AND VAR-HOUR METERS CLASS 02 S 05 S AND 10 S - SPECIFICATION First Revision

144000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
12.8.6, 10.2(Radio Interference Measurement)	-	1	Type Test: Rs. 1,44,000/- Acceptance Test Rs. 14,500/- /Sample
10.1, 12.8.5(Surge Immunity test)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted and consolidated charges are applicable.
6.1(General)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted and consolidated charges are applicable.
10.1, 12.8.4(Fast Transient Burst Test)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted and consolidated charges are applicable.
10.1, 12.8.3(Test for immunity to electromagnetic HF field)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted and consolidated charges are applicable.
6.2(Meter Case)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted and consolidated charges are applicable.
10.1, 12.8.2(Test for Immunity to Electrostatic Discharge (ESD))	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted and consolidated charges are applicable.
6.3(Window)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted and consolidated charges are applicable.
6.8, 12.4(Test of Resistance to Heat and Fire)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted and consolidated charges are applicable.
6.4(Terminals, Terminals Block(s) and Protective Earth Terminal)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted and consolidated charges are applicable.
6.9, 12.5(Test of Protection Against Penetration of Dust and Water)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted and consolidated charges are applicable.
12.3.3(Spring hammer test)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted and consolidated charges are applicable.
6.5(Terminal Cover(s))	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted and consolidated charges are applicable.
12.3.1(Shock test)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted and consolidated charges are applicable.
12.3.2(Vibration test)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted and consolidated charges are applicable.
6.6(Clearance and Creepage Distance)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted and consolidated charges are applicable.
12.6.3(Damp Heat Cycle Test)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted and consolidated charges are applicable.
12.6.2(Cold Test)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted and consolidated charges are applicable.
6.7(Insulating Encased Meter)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted and consolidated charges are applicable.
12.6.1(Dry heat test)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted and consolidated charges are applicable.
6.10(Display of Measured Values)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted and consolidated charges are applicable.
6.11(Output device)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted and consolidated charges are applicable.
9.4 & 12.7.5(Influence of Heating)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted and consolidated charges are applicable.
9.3 & 12.7.4(Influence of Self-heating)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted and consolidated charges are applicable.
9.2.3 & 12.7.3(Short Time Over Current)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted and consolidated charges are applicable.
7.1(Name Plate)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted and consolidated charges are applicable.
9.2.2 & 12.7.2(Influence of Supply Voltage)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted and consolidated charges are applicable.
9.1 & 12.7.1(Power Consumption)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted and consolidated charges are applicable.
7.2(Connections, Diagrams and Terminal Marking)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted and consolidated charges are applicable.
11.2(‘Abnormal’ ac magnetic induction of external origin 10 mT)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted and consolidated charges are applicable.
11.2(Continuous ‘abnormal’ magnetic induction of external origin)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted and consolidated charges are applicable.
9.5 & 12.7.6.2(Impulse voltage test)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted and consolidated charges are applicable.
11.2(Electromagnetic HF fields)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted and consolidated charges are applicable.
9.5 & 12.7.6.3(a.c. voltage test)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted and consolidated charges are applicable.
11.2(Magnetic induction of external origin 0.5 mT)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted and consolidated charges are applicable.
12.7.6.4(Insulation resistance test)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted and consolidated charges are applicable.
11.2("Phase of Auxiliary supply voltage by 120 degree")	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted and consolidated charges are applicable.
11.1(Limits of Error Due to Variation of the Current)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted and consolidated charges are applicable.
11.2(Auxiliary voltage ± 15 percent)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted and consolidated charges are applicable.
11.2(Continuous magnetic induction of external origin)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted and consolidated charges are applicable.
11.2(Voltage unbalance)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted and consolidated charges are applicable.
11.2(Reversed phase sequence)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted and consolidated charges are applicable.
11.3 & 12.11(Limits of Error Due to Ambient Temperature Variation)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted and consolidated charges are applicable.
11.2(Wave form: 10 percent of third harmonic in the current)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted and consolidated charges are applicable.
11.2(Frequency variation)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted and consolidated charges are applicable.
11.4.1(Initial Start-up of the Meter)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted and consolidated charges are applicable.
11.7 & 12.16(Repeatability of Error Test)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted and consolidated charges are applicable.
11.6 & 12.14(Meter Constant)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted and consolidated charges are applicable.
12.13 & 11.5(Starting Current)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted and consolidated charges are applicable.
11.4.2 & 12.12(Running with No-Load)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted and consolidated charges are applicable.
7.1 a)(MARKING OF METERS : Name Plate)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted and consolidated charges are applicable.
7.1 b)(MARKING OF METERS : Name Plate)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted and consolidated charges are applicable.
7.1 c)(MARKING OF METERS : Name Plate)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted and consolidated charges are applicable.
7.1 d)(MARKING OF METERS : Name Plate)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted and consolidated charges are applicable.
7.1 e)(MARKING OF METERS : Name Plate)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted and consolidated charges are applicable.
7.1 f)(MARKING OF METERS : Name Plate)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted and consolidated charges are applicable.
7.1 g)(MARKING OF METERS : Name Plate)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted and consolidated charges are applicable.
7.1 h)(MARKING OF METERS : Name Plate)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted and consolidated charges are applicable.
7.1 j)(MARKING OF METERS : Name Plate)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted and consolidated charges are applicable.
7.1 k)(MARKING OF METERS : Name Plate)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted and consolidated charges are applicable.
7.1 m)(MARKING OF METERS : Name Plate)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted and consolidated charges are applicable.
7.1 n)(MARKING OF METERS : Name Plate)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted and consolidated charges are applicable.
7.1 p)(MARKING OF METERS : Name Plate)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted and consolidated charges are applicable.
7.1.1(BIS certification Marking)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted and consolidated charges are applicable.
7.2(Connection diagrams and terminal marking)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted and consolidated charges are applicable.
8(Climatic Conditions)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted and consolidated charges are applicable.
9.6 & 12.17(Immunity to Earth/Phase Fault)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted and consolidated charges are applicable.
12.15(Interpretation of Test Results)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted and consolidated charges are applicable.
11.2(Voltage variation)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted and consolidated charges are applicable.
12.8.6, 10.2(Radio Interference Measurement)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted and consolidated charges are applicable.
10.1, 12.8.5(Surge Immunity test)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted and consolidated charges are applicable.
6.1(General)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted and consolidated charges are applicable.
10.1, 12.8.4(Fast Transient Burst Test)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted and consolidated charges are applicable.
10.1, 12.8.3(Test for immunity to electromagnetic HF field)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted and consolidated charges are applicable.
6.2(Meter Case)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted and consolidated charges are applicable.
10.1, 12.8.2(Test for Immunity to Electrostatic Discharge (ESD))	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted and consolidated charges are applicable.
6.3(Window)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted and consolidated charges are applicable.
6.8, 12.4(Test of Resistance to Heat and Fire)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted and consolidated charges are applicable.
6.4(Terminals, Terminals Block(s) and Protective Earth Terminal)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted and consolidated charges are applicable.
6.9, 12.5(Test of Protection Against Penetration of Dust and Water)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted and consolidated charges are applicable.
12.3.3(Spring hammer test)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted and consolidated charges are applicable.
6.5(Terminal Cover(s))	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted and consolidated charges are applicable.
12.3.1(Shock test)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted and consolidated charges are applicable.
12.3.2(Vibration test)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted and consolidated charges are applicable.
6.6(Clearance and Creepage Distance)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted and consolidated charges are applicable.
12.6.3(Damp Heat Cycle Test)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted and consolidated charges are applicable.
12.6.2(Cold Test)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted and consolidated charges are applicable.
6.7(Insulating Encased Meter)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted and consolidated charges are applicable.
12.6.1(Dry heat test)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted and consolidated charges are applicable.
6.10(Display of Measured Values)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted and consolidated charges are applicable.
6.11(Output device)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted and consolidated charges are applicable.
9.4 & 12.7.5(Influence of Heating)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted and consolidated charges are applicable.
9.3 & 12.7.4(Influence of Self-heating)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted and consolidated charges are applicable.
9.2.3 & 12.7.3(Short Time Over Current)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted and consolidated charges are applicable.
7.1(Name Plate)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted and consolidated charges are applicable.
9.2.2 & 12.7.2(Influence of Supply Voltage)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted and consolidated charges are applicable.
9.1 & 12.7.1(Power Consumption)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted and consolidated charges are applicable.
7.2(Connections, Diagrams and Terminal Marking)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted and consolidated charges are applicable.
11.2(‘Abnormal’ ac magnetic induction of external origin 10 mT)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted and consolidated charges are applicable.
11.2(Continuous ‘abnormal’ magnetic induction of external origin)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted and consolidated charges are applicable.
9.5 & 12.7.6.2(Impulse voltage test)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted and consolidated charges are applicable.
11.2(Electromagnetic HF fields)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted and consolidated charges are applicable.
9.5 & 12.7.6.3(a.c. voltage test)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted and consolidated charges are applicable.
11.2(Magnetic induction of external origin 0.5 mT)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted and consolidated charges are applicable.
12.7.6.4(Insulation resistance test)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted and consolidated charges are applicable.
11.2("Phase of Auxiliary supply voltage by 120 degree")	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted and consolidated charges are applicable.
11.1(Limits of Error Due to Variation of the Current)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted and consolidated charges are applicable.
11.2(Auxiliary voltage ± 15 percent)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted and consolidated charges are applicable.
11.2(Continuous magnetic induction of external origin)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted and consolidated charges are applicable.
11.2(Voltage unbalance)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted and consolidated charges are applicable.
11.2(Reversed phase sequence)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted and consolidated charges are applicable.
11.3 & 12.11(Limits of Error Due to Ambient Temperature Variation)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted and consolidated charges are applicable.
11.2(Wave form: 10 percent of third harmonic in the current)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted and consolidated charges are applicable.
11.2(Frequency variation)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted and consolidated charges are applicable.
11.4.1(Initial Start-up of the Meter)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted and consolidated charges are applicable.
11.7 & 12.16(Repeatability of Error Test)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted and consolidated charges are applicable.
11.6 & 12.14(Meter Constant)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted and consolidated charges are applicable.
12.13 & 11.5(Starting Current)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted and consolidated charges are applicable.
11.4.2 & 12.12(Running with No-Load)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted and consolidated charges are applicable.
7.1 a)(MARKING OF METERS : Name Plate)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted and consolidated charges are applicable.
7.1 b)(MARKING OF METERS : Name Plate)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted and consolidated charges are applicable.
7.1 c)(MARKING OF METERS : Name Plate)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted and consolidated charges are applicable.
7.1 d)(MARKING OF METERS : Name Plate)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted and consolidated charges are applicable.
7.1 e)(MARKING OF METERS : Name Plate)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted and consolidated charges are applicable.
7.1 f)(MARKING OF METERS : Name Plate)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted and consolidated charges are applicable.
7.1 g)(MARKING OF METERS : Name Plate)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted and consolidated charges are applicable.
7.1 h)(MARKING OF METERS : Name Plate)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted and consolidated charges are applicable.
7.1 j)(MARKING OF METERS : Name Plate)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted and consolidated charges are applicable.
7.1 k)(MARKING OF METERS : Name Plate)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted and consolidated charges are applicable.
7.1 m)(MARKING OF METERS : Name Plate)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted and consolidated charges are applicable.
7.1 n)(MARKING OF METERS : Name Plate)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted and consolidated charges are applicable.
7.1 p)(MARKING OF METERS : Name Plate)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted and consolidated charges are applicable.
7.1.1(BIS certification Marking)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted and consolidated charges are applicable.
7.2(Connection diagrams and terminal marking)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted and consolidated charges are applicable.
8(Climatic Conditions)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted and consolidated charges are applicable.
9.6 & 12.17(Immunity to Earth/Phase Fault)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted and consolidated charges are applicable.
12.15(Interpretation of Test Results)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted and consolidated charges are applicable.
11.2(Voltage variation)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted and consolidated charges are applicable.

Complete

19 Apr, 2024

IS 1651 (2013)

Stationary cells and batteries, lead - Acid type (With Tubular Positive Plates) - Specification (Fourth Revision)

50500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl. 12.2(IS 1651-2013)	-	3000		Testing charge to be revised

Complete

19 Apr, 2024

IS 13779 (2020)

ac STATIC WATTHOUR METERS CLASS 1 AND 2-Specefication

110000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Classification)	-	1	Type Test : Rs. 1,00,000/- (1Ph.), Rs. 1,10,000/- (3Ph.) Acceptance Test : Rs. 10,000/-(1 Ph.)/Sample & Rs.14,500/- (3 Ph.)/Samples.
5.1(Standard Reference Voltages)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
5.2(Standard Basic Currents)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
5.3(Rated Maximum Current)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
5.4(Standard Frequency)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
6.1(General)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
6.2(Meter Case)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.16 & 11.7(Test of repeatability of error)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
6.3(Window)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
6.4(Terminals, terminal block and protective earth terminal)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
6.5(Terminals covers and Extended Terminal Cover)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
6.6(Clearance and creepage distances)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.15 & 11.6(Test of meter constant)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
6.7(Insulating encased meter)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
6.10(Display of measured values)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
6.11(Output device)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
7.1(Name Plate)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
7.2(Connection diagrams and terminal marking)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.3.1(Shock test)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.14 & 11.5(Test of starting condition)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.3.2(Vibration test)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.13 & 11.4(Test of no-load condition)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.3.3(Spring hammer test)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.4(Test of resistance to heat and fire)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.12 & 11.3(Test of ambient temperature influence)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.5(Test of protection against penetration of dust and water)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
11.2(Test on limits of error due to other influence quantities)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.6.1(Dry heat test)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.6.2(Cold test)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
11.1(Test on limits of error due to variation of current)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.6.3(Damp heat cyclic test)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.9.5(Surge Immunity Test)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.7.1(Test of power consumption)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.9.6(Radio Interference Measurement)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.9.4(Fast transient burst test)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.7.2(Test of influence of supply voltage)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.7.2(Voltage interruptions of Vref=100% Interruption time: 1sec Number of interruptions: 3 Restoring time between interruptions: 50msec.)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.7.2(Voltage interruptions of Vref=100% Interruption time: 20msec Number of interruptions: 1)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.7.2(Voltage dip of Vref=50% Dip time: 1 min Number of dips: 1)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.8(Test of immunity to earth/phase fault)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.7.3(Test of influence of short time over currents)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.7.6.4(Insulation resistance test)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.9.3(Test of Immunity to electromagnetic HF field)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.9.2(Test of Immunity to electrostatic discharge)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.7.5(Test of influence of heating)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.7.6.2(Impulse voltage test of electric circuits relative to earth)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.7.6.3(ac high voltage test)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.7.4(Test of Influence of self heating)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.7.6.4(Insulation resistance test)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.7.1(Test of power consumption)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.7.6.2(Impulse voltage test)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.7.6.2(Impulse voltage tests for circuits and between the circuits)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
4(Classification)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
5.1(Standard Reference Voltages)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
5.2(Standard Basic Currents)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
5.3(Rated Maximum Current)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
5.4(Standard Frequency)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
6.1(General)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
6.2(Meter Case)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.16 & 11.7(Test of repeatability of error)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
6.3(Window)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
6.4(Terminals, terminal block and protective earth terminal)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
6.5(Terminals covers and Extended Terminal Cover)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
6.6(Clearance and creepage distances)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.15 & 11.6(Test of meter constant)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
6.7(Insulating encased meter)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
6.10(Display of measured values)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
6.11(Output device)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
7.1(Name Plate)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
7.2(Connection diagrams and terminal marking)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.3.1(Shock test)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.14 & 11.5(Test of starting condition)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.3.2(Vibration test)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.13 & 11.4(Test of no-load condition)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.3.3(Spring hammer test)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.4(Test of resistance to heat and fire)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.12 & 11.3(Test of ambient temperature influence)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.5(Test of protection against penetration of dust and water)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
11.2(Test on limits of error due to other influence quantities)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.6.1(Dry heat test)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.6.2(Cold test)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
11.1(Test on limits of error due to variation of current)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.6.3(Damp heat cyclic test)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.9.5(Surge Immunity Test)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.7.1(Test of power consumption)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.9.6(Radio Interference Measurement)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.9.4(Fast transient burst test)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.7.2(Voltage interruptions of Vref=100% Interruption time: 1sec Number of interruptions: 3 Restoring time between interruptions: 50msec.)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.7.2(Voltage interruptions of Vref=100% Interruption time: 20msec Number of interruptions: 1)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.7.2(Voltage dip of Vref=50% Dip time: 1 min Number of dips: 1)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.8(Test of immunity to earth/phase fault)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.7.3(Test of influence of short time over currents)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.7.6.4(Insulation resistance test)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.9.3(Test of Immunity to electromagnetic HF field)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.9.2(Test of Immunity to electrostatic discharge)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.7.5(Test of influence of heating)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.7.6.2(Impulse voltage test of electric circuits relative to earth)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.7.6.3(ac high voltage test)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.7.4(Test of Influence of self heating)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.7.2(Test of influence of supply voltage)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.7.6.4(Insulation resistance test)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.7.1(Test of power consumption)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.7.6.2(Impulse voltage test)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.7.6.2(Impulse voltage tests for circuits and between the circuits)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.

Complete

19 Apr, 2024

IS 13369 (1992)

Stationary lead - Acid batteries (With Tubular Positive Plates) in monobloc container - Specification

50500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 11.4(IS 13369-1992, Amndt. 1 to 3)	-	3000	-
Cl. 11.5(IS 13369-1992, Amndt. 1 to 3)	-	12000	-
Cl. 11.6(IS 13369-1992, Amndt. 1 to 3)	-	10000	-
Cl. 11.7(IS 13369-1992, Amndt. 1 to 3)	-	500000	-
Cl. 11.8(IS 13369-1992, Amndt. 1 to 3)	-	8000	-
Cl. 11.9(IS 13369-1992, Amndt. 1 to 3)	-	126000	-
Cl. 11.10(IS 13369-1992, Amndt. 1 to 3)	-	3000	-

Complete

19 Apr, 2024

IS/IEC 60079 : Part 1 (2014)

Explosive Atmospheres - Part 1 : Equipment Protection by Flameproof Enclosures "d"

60000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Level of protection (equipment protection level, EPL))	-	0	-
4.1(General)	-	0	-
4.4(Requirements for level of protection “dc”)	-	0	-
4.4.1(General)	-	0	-
4.4.2(Construction of “dc” devices)	-	0	-
4.4.2.1(General)	-	0	-
4.4.2.2(Free internal volume)	-	0	-
4.4.2.3(Seal protection)	-	0	-
4.4.2.4(Continuous operating temperature (COT) requirements)	-	0	-
4.4.2.5(Ratings)	-	0	-
4.4.3(Tests for “dc” devices)	-	0	-
5(Flameproof joints)	-	12000	Test charge includes all clauses under Cl. 5
5.1(General requirements)	-	0	-
5.2(Non-threaded joints)	-	0	-
5.2.1(Width of joints (L))	-	0	-
5.2.2(Gap (i))	-	0	-
5.2.3(Spigot joints)	-	0	-
5.2.4(Holes in joint surfaces)	-	0	-
5.2.5(Conical joints)	-	0	-
5.2.6(Joints with partial cylindrical surfaces (not permitted for Group IIC))	-	0	-
5.2.7(Flanged joints for acetylene atmospheres)	-	0	-
5.2.8(Serrated joints)	-	0	-
5.2.9(Multi-step joints)	-	0	-
5.3(Threaded joints)	-	0	-
5.4(Gaskets (including O-rings))	-	0	-
5.5(Equipment using capillaries)	-	0	-
6(Sealed joints)	-	333600	Test charge includes all clauses under cl. 6
6.1(Cemented joints)	-	0	-
6.1.1(General)	-	0	-
6.1.2(Mechanical strength)	-	0	-
6.1.3(Width of cemented joints)	-	0	-
6.2(Fused glass joints)	-	0	-
6.2.2(Width of fused glass joints)	-	0	-
7(Operating rods)	-	0	-
8.1.1(Joints of shafts)	-	0	-
8.1.2(Cylindrical joints)	-	0	-
8.1.3(Labyrinth joints)	-	0	-
8.1.4(Joints with floating glands)	-	0	-
8.2.1(Sleeve bearings)	-	0	-
8.2.2(Rolling-element bearings)	-	0	-
9(Light-transmitting parts)	-	0	-
10.2(Openings for breathing or draining)	-	0	Facility not available
10.3(Composition limits)	-	0	Facility not available
10.4(Dimensions)	-	0	Facility not available
10.5(Elements with measurable paths)	-	0	Facility not available
10.6(Elements with non-measurable paths)	-	0	Facility not available
10.7.1(Removable devices)	-	0	Facility not available
10.7.2(Mounting arrangements of the elements)	-	0	Facility not available
10.8(Mechanical strength)	-	0	Facility not available
10.9(Breathing devices and draining devices when used as Ex components)	-	0	Facility not available
10.9.1(General)	-	0	Facility not available
10.9.2(Mounting arrangements of the elements and components)	-	0	Facility not available
10.9.3(Thermal tests - Test procedure as per Cl 10.9.3.2.2)	-	0	Facility not available
10.9.3.3(Test for non-transmission of an internal ignition - Test procedure as per Cl 10.9.3.3.2)	-	0	Facility not available
10.9.3.4(Test of the ability of the breathing and draining device to withstand pressure -Test procedure as per Cl 10.9.3.4.1)	-	0	Facility not available
10.9.4(Ex component certificate)	-	0	Facility not available
11.1(Fasteners and openings)	-	0	-
11.2(Fasteners and openings)	-	0	-
11.3(Fasteners and openings)	-	0	-
11.4(Fasteners and openings)	-	0	-
11.5(Fasteners and openings)	-	0	-
11.6(Fasteners and openings)	-	0	-
11.7(Fasteners and openings)	-	0	-
11.8(Fasteners and openings)	-	0	-
11.9(Fasteners and openings)	-	0	-
12.1(Materials)	-	0	-
12.2(Materials)	-	0	-
12.3(Materials)	-	0	-
12.4(Materials)	-	0	-
12.5(Materials)	-	0	-
12.6(Materials)	-	0	-
12.7(Materials)	-	0	-
12.8(Materials)	-	0	-
13.1(Entries for flameproof enclosures)	-	0	-
13.2(Threaded holes)	-	0	-
13.3(Non-threaded holes (for Group I only))	-	0	-
13.4(Cable glands)	-	0	-
13.5.1(Conduit sealing devices)	-	0	-
13.5.2(Conduit sealing devices)	-	0	-
13.5.3(Conduit sealing devices)	-	0	-
13.6.1(Plugs and sockets and cable couplers)	-	3000	Test charge includes all clauses under cl. no. 13.6
13.6.2(Plugs and sockets and cable couplers)	-	0	-
13.6.3(Plugs and sockets and cable couplers)	-	0	-
13.6.4(Plugs and sockets and cable couplers)	-	0	-
13.6.5(Plugs and sockets and cable couplers)	-	0	-
13.7(Bushings)	-	0	-
13.8(Blanking elements)	-	0	-
15.2.1(Tests of ability of the enclosure to withstand pressure)	-	0	-
15.2.2(Determination of explosion pressure (reference pressure))	-	45000	-
15.2.3.2(Overpressure test – First method (static))	-	7500	-
15.3.1(Test for non-transmission of an internal ignition)	-	0	-
15.3.2(Electrical equipment of Groups I, IIA and IIB)	-	30000	-
15.3.3(Electrical equipment of Group lIC)	-	22500	-
15.5(Tests for “dc” devices - Test procedure as per Cl 15.5.3.2)	-	45000	-
17(Switchgear for Group I)	-	0	-
17.2.1(Means of isolation)	-	0	-
17.2.2(Means of isolation)	-	0	-
17.2.3(Means of isolation)	-	0	-
17.2.4(Means of isolation)	-	0	-
17.3(Doors or covers)	-	0	-
17.3.1(Quick-acting doors or covers)	-	0	-
17.3.2(Doors or covers fixed by screws)	-	0	-
17.3.3(Threaded doors or covers)	-	0	-
18(Lampholders and Iamp caps)	-	0	-
18.2(Device preventing lamps working loose)	-	0	-
18.3.1(Holders and caps for lamps with cylindrical caps)	-	0	-
18.3.2(Holders and caps for lamps with cylindrical caps)	-	0	-
18.4.1(Holders for lamps with threaded caps)	-	0	-
18.4.2(Holders for lamps with threaded caps)	-	0	-
18.4.3(Holders for lamps with threaded caps)	-	0	-
19.1(Non-metallic enclosures and non-metallic parts of enclosures)	-	0	-
19.2(Resistance to tracking and creepage distances on internal surfaces of the enclosure walls)	-	0	-
19.4(Test of erosion by flame)	-	30000	-
20(Marking)	-	0	-
20.1(General)	-	0	-
20.2(Caution and warning markings)	-	0	-
20.3(Informative markings)	-	0	-
21(Instructions)	-	0	-
4.3(Requirements for level of protection “db”)	-	0	-

Complete

19 Apr, 2024

IS 13252 : Part 1 (2010)

Information technology equipment - Safety: Part 1 general requirements (Second Revision)

110500 View breakup
-

Clause No.	Exclusion	Remark
1.5(Components)	-	-
1.6(Power interface .)	-	-
1.7(Markings and instructions)	-	-
2.1(Protection from electric shock and energy hazards)	-	-
2.2(SELV circuits)	-	-
2.3(TNV circuits)	-	-
2.4(Limited current circuits)	-	-
2.5(Limited power sources .)	-	-
2.6(Provisions for earthing and bonding)	-	-
2.7(Overcurrent and earth fault protection in primary circuits)	-	-
2.8(Safety interlocks)	-	-
2.9(Electrical insulation)	-	-
2.10(Clearances, creepage distances and distances through insulation)	-	-
3.1(General)	-	-
3.2(Connection to a mains supply)	-	-
3.3(Wiring terminals for connection of external conductors)	-	-
3.4(Disconnection from the mains supply)	-	-
3.5(Interconnection of equipment)	-	-
4.1(Stability)	-	-
4.2(Mechanical strength)	-	-
4.3(Design and construction)	-	-
4.4(Protection against hazardous moving parts)	-	-
4.5(Thermal requirements)	-	-
4.6(Openings in enclosures)	-	-
4.7(Resistance to fire)	-	-
5.1(Touch current and protective conductor curren)	-	-
5.2(Electric strength)	-	-
5.3(Abnormal operating and fault conditions)	-	-
6.1(Protection of telecommunication network service persons, and users of other equipment connected to the network, from hazards in the equipment)	-	-
6.2(Protection of equipment users from overvoltages on networks telecommunication)	-	-
6.3(Protection of the telecommunication wiring system from overheating)	-	-
7.1(General)	-	-
7.2(Protection of cable distribution system service persons, and users of other equipment connected to the system, from hazardous voltages in the equipment)	-	-
7.3(Protection of equipment users from overvoltages on the cable distribution system)	-	-
7.4(Insulation between primary circuits and cable distribution systems)	-	-
1.5(Components)	-	-
2.8.2/2.8.5(Interlock switches)	-	-
2.8.7(Switches and Relay)	-	-
2.10.4.2(Material Group and Comparative Tracking Index)	-	-
2.10.5.3(Insulating Compound as Solid Insulation)	-	-
2.10.5.4(Opto-coupler)	-	-
2.10.5.6(Thin sheet materials)	-	-
2.10.5.11(SMPS Transformer and Inductor)	-	-
2.10.5.12(Wires in wound components)	-	-
2.10.5.13(Winding wire)	-	-
2.10.5.14(Additional insulation in wound components)	-	-
2.10.6(PCB material)	-	-
2.10.8.2(Thermal conditioning (thermal ageing))	-	-
2.10.8.4(Abrasion resistance test)	-	-
2.10.9(Thermal Cycling)	-	-
2.10.10(Test for Pollution Degree 1 environment and for insulating compound)	-	-
2.10.11(Tests for semiconductor devices and for cemented joints)	-	-
2.10.12(Enclosed and sealed parts)	-	-
3.1.4(Internal wire)	-	-
3.2.4(Appliance inlet /connector)	-	-
3.2.4(Appliance inlet /connector)	-	-
3.2.5(Non re-wirable plug with PVC sheathed cable)	-	-
4.2.8(Cathode Ray Tubes)	-	-
4.3.8(Batteries)	-	-
4.3.10(Dust, powders, liquids and gases)	-	-
4.3.11(Containers for liquids or gases)	-	-
4.3.12(Flammable liquids)	-	-
4.3.13.2(Ionizing radiation)	-	-
4.3.13.3/ Annex Y(Effect of UV radiation on material/Ultraviolet conditioning test)	-	-
4.3.13.4(Human exposure to ultraviolet (UV) radiation)	-	-
4.3.13.5(LED, laser class)	-	-
Annex A3(Hot flaming oil test)	-	-
Annex U(Insulating winding wires for use without interleaved insulation)	-	-
Annex CC(Evaluation of integrated circuit (IC) current limiters)	-	-
Annex K(Thermal Control)	-	-
Annex Q(Voltage Dependent Resistors)	-	-
Annex B(Motor tests under abnormal conditions)	-	-
Annex C(Transformers)	-	-
Annex DD(Requirements for the mounting means of a rack mounted equipment)	-	-
Annex EE(Household and home/ office document/ media shredders)	-	-

Complete

19 Apr, 2024

IS 10322 : Part 5 : Sec 1 (2012)

Luminaires: Part 5 particular requirements: Sec 1 fixed general purpose luminaires (First Revision)

45500.00 View breakup
-

Clause No.	Exclusion	Remark
4(General Test Requireements)	-	-
5(Classification of Luminaires')	-	-
6.0(Marking)	-	-
7.0(Construction)	-	-
8.0(Creepage Distance and Clearances)	-	-
9.0(Provision for earthing)	-	-
10.0(Terminals)	-	-
11.0(External & Internal Wiring)	-	-
12.0(Protection against electric shock)	-	-
13.0(Endurance Tests and Thermal Tests)	-	-
14.0(Resistance to Dust & Moisture)	-	-
15.0(Insulation Resistance and Electric Strength)	-	-
16.0(Resistance to Heat , fire and tracking)	-	-
17.0(Photometric Test)	-	-

Complete

19 Apr, 2024

IS 15885 : Part 2 : Sec 13 (2012)

Safety of lamp controlgear: Part 2 particular requirements: Sec 13 d.c. or a.c. supplied electronic controlgear for led modules

45500 View breakup
-

Clause No.	Exclusion	Remark
7(Marking)	-	-
8(Protection against accidental contact with live parts)	-	-
9(Terminals)	-	-
10(PROVISION FOR EARTHING)	-	-
11(MOISTURE RESISTANCE)	-	-
12(Electric Strength)	-	-
13(Thermal endurance test for winding of ballasts)	-	-
14(Fault conditions)	-	-
15(Transformer heating)	-	-
16(Construction)	-	-
17(Creepage distance and clearances)	-	-
18(Screws, current carrying parts and connections)	-	-
19(Resistance to heat, fire and tracking)	-	-
20(Resistance to corrosion)	-	-
16(Enclosures)	-	-
16(Bridging resistor in primary circuit)	-	-
16(Capacitor and RC units)	-	-
16(RF suppression (X-Y capacitors))	-	-
16(Inductor)	-	-
16(MOV/VDR)	-	-
16(SMPS/Mains Transformer)	-	-
16(PCB material)	-	-
19(Metal base PCB for LED)	-	-
19(Transparent cover)	-	-
19(Bobbin)	-	-
16(Insulated tape)	-	-
16(Heat shrinkage sleeve)	-	-
19(Terminals)	-	-
16(Connector)	-	-
16(Fuse)	-	-
16(Internal wire)	-	-
16(LED)	-	-
16(Opto-coupler)	-	-
16(Opto-coupler)	-	-
16(EMI/EMC filter)	-	-
16(Winding wire)	-	-
16(Thin sheet materials)	-	-

Complete

19 Apr, 2024

IS 16102 : Part 1 (2012)

Self - Ballasted led lamps for general lighting services: Part 1 safety requirements

45500 View breakup
-

Clause No.	Exclusion	Remark
5(Marking)	-	-
6(Interchangeability)	-	-
7(Protection against accidental contact with live parts)	-	-
8(Insulation Resistance and Electric Strength)	-	-
9(MECHANICAL STRENGTH)	-	-
10(cap temperature)	-	-
11(Resistance to Heat)	-	-
12(Resistance to Flame and Ignition)	-	-
13(Fault conditions)	-	-
14(Creepage distance and clearances)	-	-
4(General requirement and General test requirements)	-	-
5(Marking)	-	-
6(Interchangeability)	-	-
7(Protection against accidental contact with live parts)	-	-
8(Strength after humidity treatment)	-	-
9(Mechanical strength)	-	-
10(Cap temperature rise)	-	-
11(Resistance to heat)	-	-
12(Resistance to flame and ignition)	-	-
13(Fault conditions)	-	-
14(Creepage distances and clearances)	-	-
15(Selection of lamps for tests (Sampling))	-	-
16(Condition of compliance)	-	-
17(Tests)	-	-
Annex A(Ovreview of systems composed of LED modules and control gear)	-	-
Annex B(Lamps with operating position limitations)	-	-

Complete

19 Apr, 2024

IS 1652 (2013)

Stationary cells and batteries, lead - Acid type with plante positive plates - Specification (Fourth Revision)

- View breakup
Rs.50500/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

19 Apr, 2024

Included w.e.f. 20.02.2020 Upto 12V, 800 Ah

IS 302 : Part 2 : Sec 25 (2014)

Safety of household and similar electrical appliances: Part 2 Particular requirements: Section 25 Microwave ovens

78000 View breakup
-

Clause No.	Exclusion	Remark
6.0(Classification)	-	-
7(Marking and instructions)	-	-
8(Protection against live parts)	-	-
9(STARTING OF MOTOR-OPERATED APPLIANCES)	-	-
10(POWER INPUT AND CURRENT)	-	-
11(HEATING)	-	-
13(LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE)	-	-
14(IMPULSE VOLTAGE TEST)	-	-
15(HUMIDITY TREATMENT TEST)	-	-
16(LEAKAGE CURRENT AND ELECTRIC STRENGTH)	-	-
17(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	-
18(ENDURANCE)	-	-
19(ABNORMAL OPERATION)	-	-
20(STABILITY AND MECHANICAL HAZARDS)	-	-
21(MECHANICAL STRENGTH)	-	-
22(CONSTRUCTION)	-	-
23(INTERNAL WIRING)	-	-
24(COMPONENTS)	-	-
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CORDS)	-	-
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	-
27(PROVISION FOR EARTHING)	-	-
28(SCREWS AND CONNECTIONS)	-	-
29(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION)	-	-
30(RESISTANCE TO HEAT AND FIRE)	-	-
31(RESISTANCE TO RUSTING)	-	-
32(RADIATION, TOXICITY AND SIMILAR HAZARDS)	-	-

Complete

19 Apr, 2024

IS 302 : Part 2 : Sec 26 (2014)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 26 clocks (First Revision)

45500 View breakup
-

Clause No.	Exclusion	Remark
6.0(Classification)	-	-
7(Marking and instructions)	-	-
8(Protection against live parts)	-	-
9(STARTING OF MOTOR-OPERATED APPLIANCES)	-	-
10(POWER INPUT AND CURRENT)	-	-
11(HEATING)	-	-
13(LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE)	-	-
14(TRANSIENT OVERVOLTAGES)	-	-
15(MOISTURE RESISTANCE)	-	-
16(LEAKAGE CURRENT AND ELECTRIC STRENGTH)	-	-
17(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	-
18(ENDURANCE)	-	-
19(ABNORMAL OPERATION)	-	-
20(STABILITY AND MECHANICAL HAZARDS)	-	-
21(MECHANICAL STRENGTH)	-	-
22(CONSTRUCTION)	-	-
23(INTERNAL WIRING)	-	-
24(COMPONENTS)	-	-
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CORDS)	-	-
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	-
27(PROVISION FOR EARTHING)	-	-
28(SCREWS AND CONNECTIONS)	-	-
29(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION)	-	-
30(RESISTANCE TO HEAT AND FIRE)	-	-
31(RESISTANCE TO RUSTING)	-	-
32(RADIATION, TOXICITY AND SIMILAR HAZARDS)	-	-
22.16(Automatic cord reel)	-	-
22.32(Oxygen bomb for rubber material)	-	-
22.47(Water pressure inlet)	-	-
22.3(Flexing test)	-	-
24(Components)	-	-

Complete

19 Apr, 2024

IS 16242 : Part 1 (2014)

Uninterruptible power systems (UPS): Part 1 general and safety requirements for UPS

78000 View breakup
-

Clause No.	Exclusion	Remark
4.5(Components)	-	-
4.6(Power interface)	-	-
4.7(Marking & instructions)	-	-
5.1(Protection against shock and energy hazards)	-	-
5.2(Requirement of auxiliary circuits)	-	-
5.3(Protective earthing and bonding)	-	-
5.4(AC and DC power isolation)	-	-
5.5(Over current and earth fault condition)	-	-
5.6(Safety interlocks)	-	-
5.7(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION)	-	-
6.1(Wiring, connections and supply)	-	-
6.2(Connection to power)	-	-
6.3(Wiring terminals for external power conductors)	-	-
7.1(Enclosure)	-	-
7.2(STABILITY)	-	-
7.3(MECHANICAL STRENGTH)	-	-
7.4(Construction details)	-	-
7.5(Resistance to fire)	-	-
7.6(Battery location)	-	-
7.7(Temperature rise)	-	-
8.1(General procision for earth leakage)	-	-
8.2(Electric Strength)	-	-
8.3(Abnormal operating and fault conditions)	-	-
9.0(Connection to telecommunication networks)	-	-
4.5/RD 1.5(Components)	-	-
2.10.5.11(SMPS/Main transformer)	-	-
2.10.6(PCB Material)	-	-
3.2.5(Non-rewirable plug with PVC sheathed cable)	-	-
3.2.4(Appliances inlets/connectors)	-	-
2.10.5.4(Semiconductor devices)	-	-
5.6.1/ RD 2.8.7(Switches & Relays)	-	-
6.1.1/ RD 3.1.4(Insulating Conductors)	-	-

Complete

19 Apr, 2024

IS 16270 (2014)

Secondary cells and batteries for solar photovoltaic application - General requirements and methods of test

72000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.1(Capacity test)	-	12000	-
8.2(Endurance test)	-	625000	Testing Charges for Endurance (2500 hrs. / 2000 hrs. / 1800 hrs. / 1500 hrs.) Rs. 6.25 lacs/5.0 lacs/ 4.5 lacs /3.75 lacs respectively
8.3(Charge retention test)	-	10000	-
8.4(Cycle endurance in Photovoltaic application)	-	825000	-
8.5(Sulphation Test)	-	3000	-
8.6(Water loss test)	-	126000	-

Complete

19 Apr, 2024

IS 616 (2017)

Audio, video and similar electronic apparatus - Safety requirements (Fifth Revision)

78000 View breakup
-

Clause No.	Exclusion	Remark
5(Marking and instructions)	-	-
6(Hazardous radiations)	-	-
7(Heating under normal operating conditions)	-	-
8(Constructional requirements with regard to the protection against electric shock)	-	-
9(Electric shock hazard under normal operating conditions)	-	-
10(Insulation requirements)	-	-
11(Fault conditions)	-	-
12(Mechanical strength)	-	-
13(CLEARANCES and CREEPAGE DISTANCES)	-	-
14(Components)	-	-
15(TERMINALS)	-	-
16(External flexible cords)	-	-
17(Electrical connections and mechanical fixings)	-	-
18(Mechanical strength of picture tubes and protection against the effects of implosion)	-	-
19(Stability and mechanical hazards)	-	-
20(Resistance to fire)	-	-
6.1(Ionizing radiation)	-	-
6.2(Laser Radiation)	-	-
6.3()	-	-
8.16/ H 2.2/ H 2.3(Requirements for insulated winding wires for use without additional interleaved insulation)	-	-
8.16(Wound Component)	-	-
14(Components)	-	-
15(Internal wires and power cords)	-	-
16.3b(Cord Bending Test)	-	-
18(Mechanical strength of Picture tubes and protection against the effect of implosion)	-	-
20.2.4(Printed Boards)	-	-

Complete

19 Apr, 2024

IS 14697 (1999)

AC static transformer operated , watthour and var - Hour meters, class 0.2 S and 0.5 S - Specification

144000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1 a)( MARKING OF METERS: Name Plate )	-	1	Charges : for Type Test ; Rs. 1,44,000.00 & Acceptance Test ; Rs. 14,500.00 (per sample) Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
7.1 b)( MARKING OF METERS: Name Plate )	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
7.1 c)( MARKING OF METERS: Name Plate )	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
7.1 d)( MARKING OF METERS: Name Plate )	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
7.1 e)( MARKING OF METERS: Name Plate )	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
7.1 f)( MARKING OF METERS: Name Plate )	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
7.1 g)( MARKING OF METERS: Name Plate )	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
7.1 h)( MARKING OF METERS: Name Plate )	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
7.1 j)( MARKING OF METERS: Name Plate )	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
7.1 k)( MARKING OF METERS: Name Plate )	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
7.1 n)( MARKING OF METERS: Name Plate )	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
7.1 m)( MARKING OF METERS: Name Plate )	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
7.1.1(Bis marking)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
7.2(Connection Diagrams and Terminal Marking)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.7.6.2(Impulse voltage test )	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.7.6.3(ac Voltage test)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.7.6.4(Insulation resistance test)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.9.1 a)( General Test Conditions)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.9.1 b)( General Test Conditions)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.9.1 c)( General Test Conditions)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.9.1 b)( General Test Conditions)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
11.1(Limits of Error Due to Variation of the Current)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.15 a)(Limits of error and Interpretation of Test Results )	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.15 b)(Limits of error and Interpretation of Test Results )	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.15 c)(Limits of error and Interpretation of Test Results )	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.14(Test of Meter Constant/ Registration)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.13(Test of Starting Conditions)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.12(Test of No-Load Condition)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.11(Test of Ambient Temperature Influence)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.16(Repeatability of Error Test)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.1(Test of Influence Quantities)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.7.1(Test of Power Consumption )	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.7.2(Test of Influence of Supply Voltage)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.7.3(Test of Influence of Short-Time Over Currents)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.7.4(Test of influence of self-heating)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.7.5(Test of Influence of Heating )	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.8.2(Test for Immunity to Electrostatic Discharge (ESD))	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.8.3(Test for Immunity to Electromagnetic HF Fields )	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.8.4(Fast Transient Burst Tes)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.8.5(Radio interference measurement)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.6.1(dry heat test)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.6.2(cold test)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.6.3(Damp Heat Cycle Test )	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.3.3(Spring Hammer Test)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.3.1(Shock Test)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.3.2(Vibration Test)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.5 a)(Test of Protection Against Penetration of Dust )	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.5 b)( Protection against penetration of water)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.4(Test of Resistance to Heat and Fire)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.

Complete

19 Apr, 2024

IS 13779 (1999)

AC static watihour meters, class 1 and 2 - Specification (First Revision)

90000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1 b)(MARKING OF METERS : Name Plate )	-	1	For Type Test : Rs. 90,000/- (1 Ph.), Rs. 1,00,000/- (3 Ph.) For Acceptance Test : 10,000/- (1 Ph.)/Sample & Rs. 14,500/- (3 Ph.)/Sample. Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
7.1 c)(MARKING OF METERS : Name Plate )	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
7.1 d)(MARKING OF METERS : Name Plate )	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
7.1 e)(MARKING OF METERS : Name Plate )	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
7.1 f)(MARKING OF METERS : Name Plate )	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
7.1 g)(MARKING OF METERS : Name Plate )	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
7.1 h)(MARKING OF METERS : Name Plate )	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
7.1 j)(MARKING OF METERS : Name Plate )	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
7.1 k)(MARKING OF METERS : Name Plate )	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
7.1 m)(MARKING OF METERS : Name Plate )	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
7.1 p)(MARKING OF METERS : Name Plate )	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
7.1 n)(MARKING OF METERS : Name Plate )	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.7.6.2(Impulse voltage test)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.7.6.3(ac Voltage test)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.7.6.4(Insulation resistance test)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.10.1 a)(Testof Accuracy Requirements : General Test Conditions )	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.10.1 b)(Testof Accuracy Requirements : General Test Conditions )	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.10.1 c)(Testof Accuracy Requirements : General Test Conditions )	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.10.1 d)(Testof Accuracy Requirements : General Test Conditions )	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.10.1 e)(Testof Accuracy Requirements : General Test Conditions )	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.10.1 f)(Testof Accuracy Requirements : General Test Conditions )	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
11.1(Limits of Error and Interpretation or Test Results)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.16 a)(Limits of Error and Interpretation or Test Results)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.16 b)(Limits of Error and Interpretation or Test Results)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.16 c)(Limits of Error and Interpretation or Test Results)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.15(Test of Meter Constant/Registration)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.14(Test of Starting Conditions)	-	1.01	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.13(Test of No-Load Condition)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.12(Test ofAmbient Temperature Influence)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.17(Repeatability of Error Test )	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.7.1(Test of Power Consumption)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.7.2(Test of Influence of Supply Voltage)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.7.3( Test of Influence of Short-time Overcurrents)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.7.4(Test of Influence of Self-Heating)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.7.5(Test of Influence of Heating)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.8(TestorImmunity to Earth Fault)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.9.2(Test for Immunity to Electrostatic Discharge (ESD))	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.9.3(Test for Immunity to EIectromagnetic HF Fields)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.9.4(FastTransient BurstTest)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.9.5(Radio Interference Measurement)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.6.1(Dry Heat Test)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.6.2(Cold Test)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.6.3( Damp Heat Cycle Test)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.3.1(Shock Test)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.3.2(Vibration Test)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.3.3( Spring Hammer Test)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.5 a)(Test of Protection Against Penetration of Dust and Water)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.5 b)(Test of Protection Against Penetration of Dust and Water)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.4(Testof Resistance to Heat and Fire )	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.
12.11(Test of Iniluence Quantities)	-	1	Usually Lab receives jobs for Type & Acceptance test for which discounted & consolidated charges are applicable.

Complete

19 Apr, 2024

Bureau of Indian Standards

The National Standards Body of India

ELECTRONICS REGIONAL TEST LABORATORY (EAST)

BLOCK-DN;SECTOR-V;SALT LAKE CITY KOLKATA-700 091., KOLKATA, 24 PARAGANAS NORTH, West Bengal, 700091

9830786241 ertleast@stqc.gov.in

Scope List

No Record Found