BIS - LIMS (Laboratory Information Management System)

Ahmedabad Textile Industry's Research Association (ATIRA), Ahmedabad

PO Ambavadi Vistar, Vikram Sarabhai Road, Ahmedabad, Ahmadabad, Gujarat, 380015

8076915085 deepali_dydirector@atira.in

Scope List

Reset

68 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

IS 15351 (2015)

Agro textiles – Laminated high density polyethylene (HDPE) woven geomembrane for water proof lining – Specification (second revision)

172500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1.1 and 6.2(Thickness, mm- IS 7016: Part 1)	-	400	-
5.1.1 and 6.2(Mass, g/sq m)	-	400	-
5.1.1 and 6.2(Dimensions, mm- Annexure A of IS 11652)	-	300	-
5.1.1 and 6.2(Carbon black content, Percent- IS 2530)	-	500	-
5.1.1 and 6.2(Before UV exposure IS 13162 (Part 5)	-	800	-
5.1.1 and 6.2(Strain at Maximum load, Percent-IS 13162 (Part 5)	-	0	-
5.1.1 and 6.2( U.V exposure of 1000 h for warp and weft)	-	80800	-
5.1.1 and 6.2(Tear resistance, N, Min-Method A1 of IS 7016 (Part 3))	-	800	-
5.1.1 and 6.2(Puncture resistance, N, Min-Annex D)	-	1200	-
5.1.1 and 6.2(Bursting strength (Ball burst),N/cm², Min-)	-	800	-
5.1.1 and 6.2(Seam strength before UV exposure (N/mm), Min-IS 15060)	-	950	-
Table-1(Seam strength after UV exposure N/mm, Min-Annex B and IS 15060)	-	80950	-
5.1.1 and 6.2(Ash content, percent, Max-Annex F)	-	500	-
5.1.1 and 6.2(Thickness, mm- IS 7016: Part 1)	-	0	-
5.1.1 and 6.2(Mass, g/sq m)	-	0	-
5.1.1 and 6.2(Dimensions, mm- Annexure A of IS 11652)	-	0	-
5.1.1 and 6.2(Carbon black content, Percent- IS 2530)	-	0	-
5.1.1 and 6.2(Before UV exposure IS 13162 (Part 5)	-	0	-
5.1.1 and 6.2(Strain at Maximum load, Percent-IS 13162 (Part 5)	-	0	-
5.1.1 and 6.2( U.V exposure of 1000 h for warp and weft)	-	0	-
5.1.1 and 6.2(Tear resistance, N, Min-Method A1 of IS 7016 (Part 3))	-	0	-
5.1.1 and 6.2(Puncture resistance, N, Min-Annex D)	-	0	-
5.1.1 and 6.2(Bursting strength (Ball burst),N/cm², Min-)	-	0	-
5.1.1 and 6.2(Seam strength before UV exposure (N/mm), Min-IS 15060)	-	0	-
Table-1(Seam strength after UV exposure N/mm, Min-Annex B and IS 15060)	-	0	-
5.1.1 and 6.2(Ash content, percent, Max-Annex F)	-	0	-
5.1.1 and 6.2( Min, gram force at 50 percent failure-Annex C)	-	0	-
5.1.1 and 6.2(Hydrostatic resistance-Annex E)	-	0	-
Table-1(Hydrostatic resistance after UV exposure of 1000 h -Annex B and Annex E)	-	0	-
5.1.1 and 6.2(Thickness, mm- IS 7016: Part 1)	-	0	-
5.1.1 and 6.2(Mass, g/sq m)	-	0	-
5.1.1 and 6.2(Dimensions, mm- Annexure A of IS 11652)	-	0	-
5.1.1 and 6.2(Carbon black content, Percent- IS 2530)	-	0	-
5.1.1 and 6.2(Before UV exposure IS 13162 (Part 5)	-	0	-
5.1.1 and 6.2(Strain at Maximum load, Percent-IS 13162 (Part 5)	-	0	-
5.1.1 and 6.2( U.V exposure of 1000 h for warp and weft)	-	0	-
Table-1(Breaking load on 20 × 10 cm strip, N, Min after)	-	0	-
5.1.1 and 6.2(Impact failure load, at 1524 mm drop,)	-	3000	-
5.1.1 and 6.2(Tear resistance, N, Min-Method A1 of IS 7016 (Part 3))	-	0	-
5.1.1 and 6.2(Puncture resistance, N, Min-Annex D)	-	0	-
5.1.1 and 6.2(Seam strength before UV exposure (N/mm), Min-IS 15060)	-	0	-
Table-1(Seam strength after UV exposure N/mm, Min-Annex B and IS 15060)	-	0	-
5.1.1 and 6.2(Bursting strength (Ball burst),N/cm², Min-)	-	0	-
5.1.1 and 6.2(Ash content, percent, Max-Annex F)	-	0	-
5.1.1 and 6.2(Thickness, mm- IS 7016: Part 1)	-	0	-
5.1.1 and 6.2(Mass, g/sq m)	-	0	-
5.1.1 and 6.2(Dimensions, mm- Annexure A of IS 11652)	-	0	-
5.1.1 and 6.2(Carbon black content, Percent- IS 2530)	-	0	-
5.1.1 and 6.2(Before UV exposure IS 13162 (Part 5)	-	0	-
5.1.1 and 6.2(Strain at Maximum load, Percent-IS 13162 (Part 5)	-	0	-
5.1.1 and 6.2( U.V exposure of 1000 h for warp and weft)	-	0	-
Table-1(Breaking load on 20 × 10 cm strip, N, Min after)	-	0	-
5.1.1 and 6.2(Impact failure load, at 1524 mm drop,)	-	0	-
5.1.1 and 6.2(Tear resistance, N, Min-Method A1 of IS 7016 (Part 3))	-	0	-
5.1.1 and 6.2(Puncture resistance, N, Min-Annex D)	-	0	-
5.1.1 and 6.2(Seam strength before UV exposure (N/mm), Min-IS 15060)	-	0	-
Table-1(Seam strength after UV exposure N/mm, Min-Annex B and IS 15060)	-	0	-
5.1.1 and 6.2(Bursting strength (Ball burst),N/cm², Min-)	-	0	-
5.1.1 and 6.2(Ash content, percent, Max-Annex F)	-	0	-
5.1.1 and 6.2(Thickness, mm- IS 7016: Part 1)	-	0	-
5.1.1 and 6.2(Mass, g/sq m)	-	0	-
5.1.1 and 6.2(Dimensions, mm- Annexure A of IS 11652)	-	0	-
5.1.1 and 6.2(Carbon black content, Percent- IS 2530)	-	0	-
5.1.1 and 6.2(Before UV exposure IS 13162 (Part 5)	-	0	-
5.1.1 and 6.2(Strain at Maximum load, Percent-IS 13162 (Part 5)	-	0	-
5.1.1 and 6.2( U.V exposure of 1000 h for warp and weft)	-	0	-
Table-1(Breaking load on 20 × 10 cm strip, N, Min after)	-	0	-
5.1.1 and 6.2(Impact failure load, at 1524 mm drop,)	-	0	-
5.1.1 and 6.2(Tear resistance, N, Min-Method A1 of IS 7016 (Part 3))	-	0	-
5.1.1 and 6.2(Puncture resistance, N, Min-Annex D)	-	0	-
5.1.1 and 6.2(Seam strength before UV exposure (N/mm), Min-IS 15060)	-	0	-
Table-1(Seam strength after UV exposure N/mm, Min-Annex B and IS 15060)	-	0	-
5.1.1 and 6.2(Bursting strength (Ball burst),N/cm², Min-)	-	0	-
5.1.1 and 6.2(Ash content, percent, Max-Annex F)	-	0	-
3.1(HDPE Tapes)	-	600	-
3.2(HDPE Fabric)	-	200	-
5.2(Panel Width)	-	300	-

-
-

IS 14252 (2015)

Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sack for filling sand – Specification (second revision)

22610 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.2(Tapes – Width )	-	200	-
3.2(Tapes – Linear Density )	-	400	-
4.1 and Table 1 ii(Ends per dm )	-	200	-
4.1 and Table 1 iii(Picks per dm )	-	0	-
4.2 and Table 1 iv(Mass of sack )	-	400	-
4.1 and Table 1 v a(Average breaking strength of fabric Warpway )	-	800	-
4.1 and Table 1 v b(Average breaking strength of fabric Weftway )	-	0	-
4.1 and Table 1 vi(Average Breaking strength of bottom seam )	-	950	-
4.1 and Table 1 vii a(Elongation at break of fabric Lengthwise)	-	0	-
4.1 and Table 1 viii(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	16160	-
4.1 and Table 1 ix(Ash content )	-	500	-
3.2(Tapes – Width )	-	0	-
3.2(Tapes – Linear Density )	-	0	-
4.1 and Table 1 i a(Dimensions Outside Length)	-	200	-
4.1 and Table 1 i b(Dimensions Outside Width)	-	200	-
4.2 and Table 1 iv(Mass of sack )	-	0	-
4.1 and Table 1 v a(Average breaking strength of fabric Warpway )	-	0	-
4.1 and Table 1 v b(Average breaking strength of fabric Weftway )	-	0	-
4.1 and Table 1 vi(Average Breaking strength of bottom seam )	-	0	-
4.1 and Table 1 vii a(Elongation at break of fabric Lengthwise)	-	0	-
4.1 and Table 1 vii b(Elongation at break of fabric Widthwise )	-	0	-
4.1 and Table 1 viii(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	0	-
4.1 and Table 1 ix(Ash content )	-	0	-
4.1 and Table 1 ii(Ends per dm )	-	0	-
4.1 and Table 1 iii(Picks per dm )	-	0	-
3.2(Tapes – Width )	-	0	-
3.2(Tapes – Linear Density )	-	0	-
4.1 and Table 1 i a(Dimensions Outside Length)	-	0	-
4.1 and Table 1 i b(Dimensions Outside Width)	-	0	-
4.2 and Table 1 iv(Mass of sack )	-	0	-
4.1 and Table 1 v a(Average breaking strength of fabric Warpway )	-	0	-
4.1 and Table 1 v b(Average breaking strength of fabric Weftway )	-	0	-
4.1 and Table 1 vi(Average Breaking strength of bottom seam )	-	0	-
4.1 and Table 1 vii a(Elongation at break of fabric Lengthwise)	-	0	-
4.1 and Table 1 vii b(Elongation at break of fabric Widthwise )	-	0	-
4.1 and Table 1 viii(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	0	-
4.1 and Table 1 ix(Ash content )	-	0	-
4.1 and Table 1 ii(Ends per dm )	-	0	-
4.1 and Table 1 iii(Picks per dm )	-	0	-
3.1(Raw Material)	-	400	-
3.3(Tying Cord)	-	400	-
3.3(Tying Cord)	-	400	-
3.3(Tying Cord)	-	200	-
3.4.1(Seam)	-	200	-
3.4.1(Seam)	-	200	-
3.4.1(Seam)	-	200	-
3.4.1(Seam)	-	600	-

-
-

IS 863 (1988)

Specification for cotton bandage cloth, non-sterilized (second revision)

2900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(Count of yarn)	-	400	-
Table 1(Threads, dm, Min)	-	200	-
Table 1(Mass, g/m²,)	-	400	-
Table 1(Length, m)	-	200	-
Table 1(Width, cm,)	-	200	-
Table 1(pH value of aqueous extract,)	-	300	-
Table 1(Light, )	-	0	-
Table 1(Washing: Test 3)	-	0	-
Table 1(Scouring loss, Max)	-	600	-
Table 1(Warp, 20 to 25 tex ( 24s to 30s ))	-	0	-
Table 1(Weft, 25 to 30 tex ( 20s to 24s ))	-	0	-
Table 1(Warp, 20 to 25 tex ( 24s to 30s ))	-	0	-
Table 1(Weft, 25 to 30 tex ( 20s to 24s ))	-	0	-
Table 1(Length, m)	-	0	-
Table 1(Width, cm,)	-	0	-
Table 1(pH value of aqueous extract,)	-	0	-
Table 1(Scouring loss, Max)	-	0	-
Table 1(Light, )	-	0	-
Table 1(Washing: Test 3)	-	0	-
Clause 3.1 & Table 1(viii)("Freedom from optical whiteners ")	-	200	-
Table 1(Threads, dm, Min)	-	0	-
Table 1(Warp, 20 to 25 tex ( 24s to 30s ))	-	0	-
Table 1(Weft, 25 to 30 tex ( 20s to 24s ))	-	0	-
Table 1(Length, m)	-	200	-
Table 1(Width, cm,)	-	200	-
Table 1(pH value of aqueous extract,)	-	0	-
Table 1(Scouring loss, Max)	-	0	-
Table 1(Light, )	-	0	-
Table 1(Washing: Test 3)	-	0	-
Clause 3.1 & Table 1(viii)("Freedom from optical whiteners ")	-	0	-
Table 1(Threads, dm, Min)	-	0	-

-
-

IS 758 (1988)

Specification for cotton gauze, absorbent, non-sterilized (fourth revision)

3000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1,Table 1,Sr.No.i(Count of yarn a) Warp )	-	400	-
3.1,Table 1,Sr.No.i(Count of yarn b) Weft)	-	0	-
3.1,Table 1,Sr.No.ii Appendix A(Threads/dm a) Ends)	-	200	-
3.1,Table 1,Sr.No.ii Appendix A(Threads/dm b) Picks)	-	0	-
3.1,Table 1,Sr.No.iii IS 1964(Mass )	-	400	-
3.1,Table 1,Sr.No.iv IS 1954(Length)	-	200	-
3.1,Table 1,Sr.No.v Appendix A(Width,)	-	200	-
3.1,Table 1,Sr.No.vi IS : 2369(Absorbency)	-	500	-
3.1,Table 1,Sr.No.vii IS : 1390(pH value)	-	300	-
3.1,Table 1,Sr.No.viii IS : 1383(Scouring Loss)	-	600	-
3.1,Table 1,Sr.No.i(Count of yarn a) Warp )	-	0	-
3.1,Table 1,Sr.No.i(Count of yarn b) Weft)	-	0	-
3.1,Table 1,Sr.No.ii Appendix A(Threads/dm a) Ends)	-	0	-
3.1,Table 1,Sr.No.ii Appendix A(Threads/dm b) Picks)	-	0	-
3.1,Table 1,Sr.No.iii IS 1964(Mass )	-	0	-
3.1,Table 1,Sr.No.iv IS 1954(Length)	-	0	-
3.1,Table 1,Sr.No.v Appendix A(Width,)	-	0	-
3.1,Table 1,Sr.No.vi IS : 2369(Absorbency)	-	0	-
3.1,Table 1,Sr.No.vii IS : 1390(pH value)	-	0	-
3.1,Table 1,Sr.No.viii IS : 1383(Scouring Loss)	-	0	-
3.1,Table 1,Sr.No.ix (Freedom from optical whitener)	-	0	-
3.1,Table 1,Sr.No.i(Count of yarn a) Warp )	-	0	-
3.1,Table 1,Sr.No.i(Count of yarn b) Weft)	-	0	-
3.1,Table 1,Sr.No.ii Appendix A(Threads/dm a) Ends)	-	0	-
3.1,Table 1,Sr.No.ii Appendix A(Threads/dm b) Picks)	-	0	-
3.1,Table 1,Sr.No.iii IS 1964(Mass )	-	0	-
3.1,Table 1,Sr.No.iv IS 1954(Length)	-	0	-
3.1,Table 1,Sr.No.v Appendix A(Width,)	-	0	-
3.1,Table 1,Sr.No.vi IS : 2369(Absorbency)	-	0	-
3.1,Table 1,Sr.No.vii IS : 1390(pH value)	-	0	-
3.1,Table 1,Sr.No.viii IS : 1383(Scouring Loss)	-	0	-
3.1,Table 1,Sr.No.ix (Freedom from optical whitener)	-	0	-
3.1,Table 1,Sr.No.i(Count of yarn a) Warp )	-	0	-
3.1,Table 1,Sr.No.i(Count of yarn b) Weft)	-	0	-
3.1,Table 1,Sr.No.ii Appendix A(Threads/dm a) Ends)	-	0	-
3.1,Table 1,Sr.No.ii Appendix A(Threads/dm b) Picks)	-	0	-
3.1,Table 1,Sr.No.iii IS 1964(Mass )	-	0	-
3.1,Table 1,Sr.No.iv IS 1954(Length)	-	0	-
3.1,Table 1,Sr.No.v Appendix A(Width,)	-	0	-
3.1,Table 1,Sr.No.vi IS : 2369(Absorbency)	-	0	-
3.1,Table 1,Sr.No.vii IS : 1390(pH value)	-	0	-
3.1,Table 1,Sr.No.viii IS : 1383(Scouring Loss)	-	0	-
3.1,Table 1,Sr.No.ix (Freedom from optical whitener)	-	200	-

-
-

IS 16208 (2015)

Textiles - High density polyethylene (HDPE)/polypropylene (PP) woven sacks for packaging 10 kg, 15 kg, 20 kg, 25 kg and 30 kg foodgrains - Specification

24810 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2(Tapes – Width IS 6192 and IS 11197)	-	300	-
4.2(Tapes – Linear Density )	-	400	-
5.2 and Table 1 iii(Ends per dm )	-	100	-
5.2 and Table 1 iv(Picks per dm )	-	100	-
4.3.1(The number of stitches/dm)	-	200	-
5.1 and Table 1 v(Mass of sack )	-	200	-
5.2 and Table 1 vi a(Average breaking strength of fabric Lengthwise )	-	800	-
5.2 and Table 1 vi b(Average breaking strength of fabric Widthwise )	-	0	-
5.2 and Table 1 vi(Breaking strength of bottom seam )	-	950	-
5.2 and Table 1 viii b(Elongation at break of fabric Widthwise )	-	0	-
5.2 and Table 1 ix(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	16160	-
4.4 and Table 1 i(Capacity)	-	500	-
5.2 and Table 1 ii a(Dimensions Inside Length)	-	300	-
5.2 and Table 1 ii b(Dimensions Inside Width)	-	300	-
5.2 and Table 1 iii(Ends per dm )	-	0	-
5.2 and Table 1 iv(Picks per dm )	-	0	-
5.1 and Table 1 v(Mass of sack )	-	0	-
5.2 and Table 1 vi a(Average breaking strength of fabric Lengthwise )	-	0	-
5.2 and Table 1 vi b(Average breaking strength of fabric Widthwise )	-	0	-
5.2 and Table 1 vi(Breaking strength of bottom seam )	-	0	-
5.2 and Table 1 viii b(Elongation at break of fabric Widthwise )	-	0	-
5.2 and Table 1 ix(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	0	-
5.2 and Table 1 x(Ash content )	-	500	-
5.2 and Table 1 ii a(Dimensions Inside Length)	-	0	-
5.2 and Table 1 viii a(Elongation at break of fabric Lengthwise)	-	0	-
5.2 and Table 1 ix(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	0	-
5.2 and Table 1 x(Ash content )	-	0	-
4.1(Raw Material)	-	400	-
4.2(Tapes – Width IS 6192 and IS 11197)	-	300	-
4.2(Tapes – Linear Density )	-	400	-
4.2(Construction)	-	700	-
4.3.2(Mouth)	-	500	-
4.4 and Table 1 i(Capacity)	-	0	-
5.2 and Table 1 ii a(Dimensions Inside Length)	-	0	-
5.2 and Table 1 ii b(Dimensions Inside Width)	-	0	-
5.2 and Table 1 iii(Ends per dm )	-	0	-
5.2 and Table 1 iv(Picks per dm )	-	0	-
5.1 and Table 1 v(Mass of sack )	-	0	-
5.2 and Table 1 vi a(Average breaking strength of fabric Lengthwise )	-	0	-
5.2 and Table 1 vi b(Average breaking strength of fabric Widthwise )	-	0	-
5.2 and Table 1 vi(Breaking strength of bottom seam )	-	0	-
5.2 and Table 1 viii b(Elongation at break of fabric Widthwise )	-	0	-
5.2 and Table 1 ix(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	0	-
5.2 and Table 1 x(Ash content )	-	0	-
5.2 and Table 1 ii a(Dimensions Inside Length)	-	0	-
5.2 and Table 1 viii a(Elongation at break of fabric Lengthwise)	-	0	-
5.2 and Table 1 ix(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	0	-
5.2 and Table 1 x(Ash content )	-	0	-
4.1(Raw Material)	-	0	-
4.2(Tapes – Width IS 6192 and IS 11197)	-	0	-
4.2(Tapes – Linear Density )	-	0	-
4.2(Construction)	-	0	-
4.3.2(Mouth)	-	0	-
4.3.1(Stitches pass through a minimum of six layers of the fabric. )	-	200	-
4.3.1( The stitching shall be done with double fold over seam to a depth )	-	500	-
4.3.1( The outer stitch)	-	300	-
4.3.1( The two rows of stitches shall be separated from each other)	-	200	-
4.3.1(Bottom Seam)	-	500	-

-
-

IS 15907 (2010)

Agro textiles – High density polyethylene (HDPE) woven beds for vermiculture – Specification

69330 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.2.1(Thickness of coating film- method A of IS 13162 (Part 3))	-	200	-
6- Table 1- SL.No (ii)(Breaking strength before UV exposure,warp - IS 1969 )	-	800	-
6- Table 1- SL.No (ii)(Breaking strength before UV exposure,weft - IS 1969 )	-	0	-
6- Table 1- SL.No (vii)(Tear strength, Warp - Method A2 of IS 7016 (Part 3))	-	400	-
6- Table 1- SL.No (vii)(Tear strength, Weft - Method A2 of IS 7016 (Part 3))	-	400	-
6- Table 1- SL.No (xi)(Colour fastness to artificial light -IS 2454)	-	1000	-
6.2(Water Proofness,IS 7941)	-	300	-
6- Table 1- SL.No (viii)(Puncture strength - Annex C of IS 15907)	-	1200	-
6- Table 1- SL.No (x)(Resistance to chemicals, change in the mass - Annex E of IS 15907)	-	22800	-
6- Table 1- SL.No (xii)(Bursting pressure-IS 1966)	-	800	-
6- Table 1- SL.No (i)(Mass)	-	400	-
6- Table 1- SL.No (iii)(Elongation at break of fabric- IS 1969)	-	0	-
6- Table 1- SL.No (iv)(Retention of breaking strength after UV exposure, - Annex B of IS 15907 and IS 1969)	-	12320	-
6- Table 1- SL.No (v)(Welded seam strength before UV exposure- IS 1969)	-	950	-
6- Table 1- SL.No (vi)(Welded seam strength after UV exposure- Annex B of IS 15907 and IS 1969)	-	12320	-
6- Table 1- SL.No (i)(Mass)	-	0	-
6- Table 1- SL.No (ii)(Breaking strength before UV exposure,warp - IS 1969 )	-	0	-
6- Table 1- SL.No (ii)(Breaking strength before UV exposure,weft - IS 1969 )	-	0	-
6- Table 1- SL.No (v)(Welded seam strength before UV exposure- IS 1969)	-	0	-
6- Table 1- SL.No (vi)(Welded seam strength after UV exposure- Annex B of IS 15907 and IS 1969)	-	0	-
6- Table 1- SL.No (vii)(Tear strength, Warp - Method A2 of IS 7016 (Part 3))	-	0	-
6- Table 1- SL.No (vii)(Tear strength, Weft - Method A2 of IS 7016 (Part 3))	-	0	-
6- Table 1- SL.No (viii)(Puncture strength - Annex C of IS 15907)	-	0	-
6- Table 1- SL.No (x)(Resistance to chemicals, change in the mass - Annex E of IS 15907)	-	0	-
6- Table 1- SL.No (xii)(Bursting pressure-IS 1966)	-	0	-
6- Table 1- SL.No (iii)(Elongation at break of fabric- IS 1969)	-	0	-
6- Table 1- SL.No (iv)(Retention of breaking strength after UV exposure, - Annex B of IS 15907 and IS 1969)	-	0	-
6- Table 1- SL.No (xi)(Colour fastness to artificial light -IS 2454)	-	0	-
4.1(Identification)	-	400	-
4.1(Linear Density)	-	400	-
4.1(Width)	-	200	-
4.3(Cord Beading - IS 15907)	-	400	-
5.2.1(Lamination- IS 15907)	-	1200	-
5.2.1(Thickness of coating film- method A of IS 13162 (Part 3))	-	200	-
5.2.1(Lamination- IS 15907)	-	700	-
5.2.2(coating thickness of the sandwich lamination- method A of IS 13162 (Part 3))	-	600	-
5.2.2(Lamination- IS 15907)	-	600	-
5.3.1(The width of the hem - IS 15907)	-	300	-
5.3.1(Construction- IS 15907)	-	200	-
5.3.2(Finished width of pocket - IS 15907)	-	200	-
5.3.2(Construction- IS 15907)	-	200	-
6.1(Length -IS 15907)	-	200	-
6.1(Width - IS 15907)	-	200	-
6.1(Height - IS 15907)	-	200	-
6.2(Water Proofness,IS 7941)	-	0	-
6.2(Water Proofness, IS 7940)	-	9240	-

-
-

IS 14968 (2015)

Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sacks for packing 50 Kg/25 kg sugar – Specification (first revision)

23160 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2(Tapes – Width IS 6192 and IS 11197)	-	200	-
4.2(Tapes – Linear Density )	-	400	-
4.3.1(stitches/dm)	-	0	-
5.2 and Table 1 iii(Ends per dm )	-	100	-
5.2 and Table 1 iv(Picks per dm )	-	100	-
5.1 and Table 1 v b(Mass of unlaminated sack with liner )	-	200	-
5.2 and Table 1 vi a(Average breaking strength of fabric Lengthwise IS 1969 (Part 1))	-	400	-
5.2 and Table 1 vi b(Average breaking strength of fabric Widthwise IS 1969 (Part 1))	-	400	-
5.2 and Table 1 viii a(Elongation at break of fabric Lengthwise IS 1969 (Part 1))	-	0	-
5.2 and Table 1 ix(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	16160	-
4.2(Construction)	-	200	-
5.2 and Table 1 ix(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	0	-
5.2 and Table 1 x(Ash content )	-	500	-
4.5 and Table 1 i(Capacity)	-	500	-
5.2 and Table 1 ii a(Dimensions Inside Length)	-	200	-
5.2 and Table 1 ii b(Dimensions Inside Width)	-	200	-
5.2 and Table 1 iii(Ends per dm )	-	0	-
5.2 and Table 1 iv(Picks per dm )	-	0	-
5.1 and Table 1 v b(Mass of unlaminated sack with liner )	-	0	-
5.2 and Table 1 vi a(Average breaking strength of fabric Lengthwise IS 1969 (Part 1))	-	0	-
5.2 and Table 1 vi b(Average breaking strength of fabric Widthwise IS 1969 (Part 1))	-	0	-
5.2 and Table 1 viii a(Elongation at break of fabric Lengthwise IS 1969 (Part 1))	-	0	-
5.2 and Table 1 ix(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	0	-
4.2(Construction)	-	0	-
5.2 and Table 1 ix(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	0	-
5.2 and Table 1 x(Ash content )	-	0	-
5.1 and Table 1 v a(Mass of unlaminated sack IS 1964)	-	200	-
4.1(Raw Material)	-	400	-
4.2(Tapes – Width IS 6192 and IS 11197)	-	0	-
4.2(Tapes – Linear Density )	-	0	-
4.3.1(Bottom Seam)	-	200	-
4.3.1(The two rows of stitches shall be separated from each other)	-	200	-
4.3.1( The outer stitch)	-	200	-
4.3.1( The stitching shall be done with double fold over seam to a depth )	-	200	-
4.3.1(Stitches pass through a minimum of six layers of the fabric. )	-	200	-
4.3.1(stitches/dm)	-	200	-
4.3.2(Mouth)	-	200	-
4.4(Liner IS 10146 or IS 10910.)	-	400	-
4.4(Mass of the loose liner )	-	0	-
4.4(Width of the loose liner)	-	200	-
4.4(Length of the line)	-	200	-
4.4(Bottom seam of the loose liner)	-	200	-
4.4.1(Liner)	-	600	-

-
-

IS 14887 (2014)

Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sacks for packaging of 50 kg food grains – Specification (first revision)

All Size

21770 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.2(Tapes – Width and Thickness ( IS 6192/IS 11197))	-	600	-
3.2(Tapes – Linear Density (IS 6192/IS 11197))	-	400	-
3.2(Tapes – Tenacity (IS 6192/IS 11197))	-	600	-
3.2(Tapes – Heat Shrinkage (HDPE) (Cl. 3.2 and IS 6192))	-	500	-
3.2(Tapes – Dimensional stability (PP) (IS 11197))	-	500	-
4.2 and Table 1 ii(Dimensions )	-	400	-
5.2 and Table 1 iii(Ends per dm )	-	100	-
4.2 and Table 1 vi(Average breaking strength of fabric )	-	800	-
4.2 and Table 1 ix(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	12320	-
4.2 and Table 1 x(Ash content )	-	500	-
5.2 and Table 1 iv(Picks per dm )	-	100	-
4.2 and Table 1 v(Mass of sack )	-	200	-
4.2 and Table 1 vi(Breaking strength of bottom seam )	-	950	-
4.2 and Table 1 viii(Elongation at break of fabric )	-	0	-
3.2(Tapes – Width and Thickness ( IS 6192/IS 11197))	-	0	-
3.2(Tapes – Linear Density (IS 6192/IS 11197))	-	0	-
3.2(Tapes – Tenacity (IS 6192/IS 11197))	-	0	-
3.2(Tapes – Heat Shrinkage (HDPE) (Cl. 3.2 and IS 6192))	-	0	-
3.2(Tapes – Dimensional stability (PP) (IS 11197))	-	0	-
4.2 and Table 1 ii(Dimensions )	-	0	-
5.2 and Table 1 iii(Ends per dm )	-	0	-
4.2 and Table 1 vi(Average breaking strength of fabric )	-	0	-
4.2 and Table 1 ix(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	0	-
4.2 and Table 1 x(Ash content )	-	0	-
5.2 and Table 1 iv(Picks per dm )	-	0	-
4.2 and Table 1 v(Mass of sack )	-	0	-
4.2 and Table 1 vi(Breaking strength of bottom seam )	-	0	-
4.2 and Table 1 viii(Elongation at break of fabric )	-	0	-
3.2(Tapes – Elongation at point of rupture (IS 6192/IS 11197))	-	0	-
3.2(Unlaminated Fabric Mass )	-	200	-
3.2(Tapes – Colour Fastness for pigmented tapes (IS 6192/IS 11197))	-	1000	-
3.3.1(Bottom seam (IS 10789))	-	1200	-
4.1 and 3.4(Mass of bale (Cl. 4.1), Capacity (Cl 3.4))	-	500	-
3.1(Material Identification)	-	400	-
3.2(Density)	-	500	-

-
-

Bureau of Indian Standards

The National Standards Body of India

Ahmedabad Textile Industry's Research Association (ATIRA), Ahmedabad

PO Ambavadi Vistar, Vikram Sarabhai Road, Ahmedabad, Ahmadabad, Gujarat, 380015

8076915085 deepali_dydirector@atira.in

Scope List