BIS - LIMS (Laboratory Information Management System)

CENTRAL INSTITUTE OF PETROCHEMICALS ENGINEERING & TECHNOLOGY (CIPET), RANCHI

HEHAL, RANCHI, JHARKHAND, INDIA, Ranchi, Ranchi, Jharkhand, 834005

9325687905 cipetranchi@gmail.com

Scope List

Reset

33 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

IS 12701 (1996)

Rotational moulded polyethylene water storage tanks - specification (First Revision)

VERTICAL & LOFT TANK FULL RANGE

13850 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2.1(Density)	-	500	-
4.2.2(MFI)	-	1100	-
4.2.3(Carbon Black Content )	-	925	-
4.2.3(Carbon Dispersion Test)	-	700	-
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	1800	Dimensions as per Cl. No: 5.1, 5.2, 5.3 & 5.4 (Cylindrical & Loft) Includes: Capacity: 500/- Overall Dia/Length/Width: 250/-Each Overall Height: 250/- ID of Man-hole: 250/- Min Weight without lid: 500/- Visual: 300/-
5.4(Wall Thickness)	-	250	Wall Thickness Above Effective Height (250/-) Wall Thickness Below Effective Height (250/-) Wall Thickness of outer layer of Tank (250/-)
6.1(Finish)	-	300	Visual
7.1.1(Resistance to Deformation)	-	700	-
7.2(Resistance to Impact)	-	1100	-
7.3(Test for Top Load Resistance)	-	900	-
7.4(Tensile Strength)	-	1350	For Tensile Strength: 1100/- Specimen Preparation: 250/-
7.5(Flexural Modulus)	-	1600	For Flexural Strength: 1100/- Specimen Preparation: 500/-
7.6(overall Migration)	-	2200	For Overall Migration : 1700/- Specimen Preparation/Conditioning: 500/-
9.1(Man-Hole and Hand-Hole Lids)	-	2975.00	ForMaterial Identification: 1050/- Visual: 300/- Carbon Black Content: 925/- Carbon Black Dispersion: 700/-
9.2(Man-Hole and Hand-Hole Lids)	-	200	For Lid Lock Up (Visual)
9.2.1(Man-Hole and Hand-Hole Lids)	-	200	For Lid Clearance
5.2 Table 2 (7)(Minimum Wall Thickness)	-	250	For Wall Thickness in Tank
9.1(Lid Thickness)	-	250	For Lid Thickness

09 Aug, 2029

-
-

IS 4984 (2016)

Polyethylene pipes for water supply - Specification (Fifth Revision)

PE63, PE80 & PE100 DN UPTO 315MM

41625 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.2(Density)	-	1125	For Density: 500/- Specimen preparation: 625/-
5.2(MFI @ 1900C/5.0 Kg)	-	1100	-
5.2(Volatile matter Content)	-	700	-
Table-2 (iii, iv)(Thermal Stability (Oxidation Induction Time), Volatile Matter)	-	2200	-
6.2.1(6.1.1 Identification Stripes)	-	250	-
6.2(Colour)	-	250	Visual
Cl-7.4(Mean Outside Diameter (For upto 50 mm take 8 reading, above 50mm take 6 reading & average will be reported))	-	500	Dimension Includes: Mean Outside Dia ovality Wall Thickness
7.4.1.2(Ovality)	-	0	-
Clause 7.1(Visual Apperance)	-	300	-
8,/8.1/8.1.1 table-5(PERFORMANCE REQUIREMENTS / Hydraulic Characteristics/ Internal Pressure Creep Rupture Test of Pipe)	-	21400	Hydraulic Characteristics: 100 hrs/27°C (4000/-) 48 hrs/80°C (1600/-) 165 hrs/80°C (4800/-) 1000 hrs/80°C (11000/-)
8.1.2 table -5(Internal Pressure Creep Rupture Test of Pipe Joints)	-	1600	48 hrs/80°C (1600/-) for Joint Pipe
8.2(Longitudinal Reversion Test)	-	900	For Reversion: 700/- Specimen preparation: 200/-
Clause 8.3(Carbon Black content)	-	925	-
Clause 8.3(Carbon Black Dispersion)	-	700	-
8.4( Melt Flow Rate)	-	1100	-
8.5 (Oxidation Induction Time)	-	2200	-
8.6(Overall migration)	-	2000	For Overall Migration : 1700/- Specimen preparation: 300/-
8.7(Density)	-	500	-
8.8(Tensile Strength for Butt-fusion)	-	1600	For Tensile test : 1100/- Specimen preparation: 500/-
8.9 table-6(Elongation at Break)	-	1600	For Tensile at yield & Elongation test : 1100/- Specimen preparation: 500/-
8.9,T6("Tensile - IS 4984-2016 (Annexure-H)")	-	0	-
8.10(Slow Crack Growth Rate)	-	6000	For Slow Crack growth test : 5500/- Specimen preparation: 500/- For 500hrs./80°C
7.2(Length)	-	300	-
7.3(Coiling)	-	300	-

09 Aug, 2029

-
-

IS 2508 (2016)

Polyethylene films and sheets - Specification (Third Revision)

TYPE-I, II, III & IV

14606 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1.1(Appearance)	-	300	Includes" Appearance. Film Form, Odour
5.1.2(Film Form)	-	0	-
5.1.3(Odour)	-	0	-
5.1.4(Density, Cl.5 of IS 13360(Part-3/Section-1))	-	500	-
5.1.5(Melt Flow Index. Cl 6, 7 of IS 13360(Part-4/Section-1))	-	1100	-
5.1.6a(Carbon Black Content, Annex-A)	-	925	Carbon black content (optional) In Black Film
5.1.6b(Ash Content, Annex-A)	-	950	In Black Film
5.1.6c(Carbon Black Dispersion, Cl.16 of IS 2530)	-	700	In Black Film
5.2.2(Tolerance on Thickness, Annex-A)	-	250	-
6.1, Table 1(Tensile strength at break. A) Machine Direction. IS 13360 (Part 5/Sec 1))	-	1350	FOR TABLE 1, 2 & 3 For Tensile & Elongation: 1100/- Specimen Preparation: 250/-
6.1, Table 1(Tensile strength at break. B) Transverse Direction. IS 13360 (Part 5/Sec 3))	-	1350	FOR TABLE 1 , 2 & 3 For Tensile & Elongation: 1100/- Specimen Preparation: 250/-
6.1, Table 1(Ageing test at (70-1)c for 7 days , cl 4 IS 7016 )	-	4300	-
6.1, Table 1(Elongation at break ,A) Machine direction .IS 13360(Part-5/sec-1) )	-	0	-
6.1, Table 1(Elongation at break ,B) Cross-machine direction..IS 13360(Part-5/sec-3) )	-	0	-
6.1, Table 1(Dartimpact strength Method B of IS 13360 (Part-5/sec-6) )	-	1000	-
6.1, Table 1(Tear resistence. A) Machine direction Annex B)	-	1000	IN Case of Type-IV Film Tear Test Charges will be: 1500/- Specimen Preparation: 500/- (Each)
6.1, Table 1(Tear resistence. B) Transverse direction )	-	1000	IN Case of Type-IV Film Tear Test Charges will be: 1500/- Specimen Preparation: 500/- (Each)
8.1, Table 3(Tensile properties ,A) Yield strenght . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do)	-	1350	FOR TABLE 1 , 2 & 3 For Tensile & Elongation: 1100/- Specimen Preparation: 250/-
8.1, Table 3(Tensile properties , B) Break strenght . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do)	-	1350	FOR TABLE 1 , 2 & 3 For Tensile & Elongation: 1100/- Specimen Preparation: 250/-
8.1, Table 3(Tensile properties ,C) Yield elongation . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do)	-	2700	FOR TABLE 1 , 2 & 3 For Tensile & Elongation: 1100/- Specimen Preparation: 250/-
8.1, Table 3(Tensile properties ,D) Break elongation . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do)	-	2700	FOR TABLE 1 , 2 & 3 For Tensile & Elongation: 1100/- Specimen Preparation: 250/-
9.1, Table 4(Puncture resistance , Annex C)	-	1350	For Puncture test: 1100/- Specimen Preparation: 250/-
Clause 7.1(Table 2)(Decrease in Tensile Strength after Ageing(Transverse Direction))	-	1350	For Tensile : 1100/- Specimen Preparation: 250/-
Clause 7.1(Table 2)(Decrease in Tensile Strength after Ageing(Machine Direction))	-	1350	For Tensile : 1100/- Specimen Preparation: 250/-
Clause 5.2.3(Tolerance on Width)	-	250	-
9.1, Table 4(Tensile properties ,A) Yield strenght . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do)	-	2700	AS PER TABLE: 04 CL. NO:9.1 For Break Strenth & Break Elongation : 2200/- (WD) Specimen Preparation: 500/-
9.1, Table 4(Tensile properties , B) Break strenght . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do)	-	2700	AS PER TABLE: 04 CL. NO:9.1 For Break Strenth & Break Elongation : 2200/- (WD) Specimen Preparation: 500/-
9.1, Table 4(Tensile properties ,C) Yield elongation . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do)	-	0	AS PER TABLE: 04 CL. NO:9.1 For Break Strenth & Break Elongation : 2200/- (WD) Specimen Preparation: 500/-
9.1, Table 4(Tensile properties ,D) Break elongation . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do)	-	0	AS PER TABLE: 04 CL. NO:9.1 For Break Strenth & Break Elongation : 2200/- (WD) Specimen Preparation: 500/-
5.2.1.1(Nominal Thickness)	-	250	-
5.2.1.2(Nominal width)	-	250	-

09 Aug, 2029

-
-

Bureau of Indian Standards

The National Standards Body of India

CENTRAL INSTITUTE OF PETROCHEMICALS ENGINEERING & TECHNOLOGY (CIPET), RANCHI

HEHAL, RANCHI, JHARKHAND, INDIA, Ranchi, Ranchi, Jharkhand, 834005

9325687905 cipetranchi@gmail.com

Scope List