BIS - LIMS (Laboratory Information Management System)

JBS TESTING SOLUTIONS (Unit-2) (24), Jalandhar

Plot No. 24, Street No. 2, Adjoining focal Point Road, Transport Nagar, Jalandhar, Jalandhar, Jalandhar, Punjab, 144004

7582929529 unit2.jbs@gmail.com

Scope List

Reset

24 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

IS 4665 : Part 2 : Sec 6 (2023)

Hand-Held Motor-Operated Electric Tools - Safety Part 2 Particular Requirements Section 6 Hammers

120000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(General Requirements)	-	0	-
5(General Conditions for the test )	-	0	-
7(Void )	-	0	-
8(Marking and Instructions)	-	2000	-
9(Protection against access to live parts)	-	5000	-
10(Starting)	-	5000	-
11(Input and current)	-	5000	-
12(Heating)	-	8000	-
13(Leakage current)	-	5000	-
14(Moisture resistance)	-	8000	-
15( Electric strength)	-	5000	-
16(Overload protection of transformers and associated circuits)	-	5000	-
17(Endurance)	-	10000	-
18(Abnormal operation)	-	7000	-
19(Mechanical hazards)	-	5000	-
20(Mechanical strength)	-	10000	-
21(Construction)	-	6000	-
22(Internal wiring)	-	5000	-
23(Components)	-	5000	-
24(Supply connection and external flexible cords)	-	5000	-
25(Terminals for external conductors)	-	3000	-
26(Provision for earthing)	-	4000	-
27(Screws and connections)	-	2000	-
28(Creepage distances, clearances and distances through insulation)	-	2000	-
29(Resistance to heat, fire and tracking)	-	6000	-
30(Resistance to rusting)	-	4000	-
31(Radiation, toxicity and similar hazards)	-	0	-

22 May, 2029

-
Included w.e.f 01.04.2026

IS 4665 : Part 2 : Sec 3 (2023)

Hand-held motor-operated electric tools - Safety Part 2 Particular requirements Section 3 grinders polishers and disk-type sanders

120000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(General Requirements)	-	0	-
6(Void)	-	0	-
8(Marking and Instructions )	-	2000	-
9(Protection against access to live parts)	-	5000	-
10(Starting)	-	5000	-
11(Input and current)	-	5000	-
12(Heating)	-	8000	-
13(Leakage current)	-	5000	-
14(Moisture resistance)	-	8000	-
15( Electric strength)	-	5000	-
16(Overload protection of transformers and associated circuits)	-	5000	-
17(Endurance)	-	10000	-
18(Abnormal operation)	-	7000	-
19(Mechanical hazards)	-	5000	-
20(Mechanical strength)	-	10000	-
21(Construction)	-	6000	-
22(Internal wiring)	-	5000	-
23(Components)	-	5000	-
24(Supply connection and external flexible cords)	-	5000	-
25(Terminals for external conductors)	-	3000	-
26(Provision for earthing)	-	4000	-
27(Screws and connections)	-	2000	-
28(Creepage distances, clearances and distances through insulation)	-	2000	-
29(Resistance to heat, fire and tracking)	-	6000	-
30(Resistance to rusting)	-	4000	-
31(Radiation, toxicity and similar hazards)	-	0	-

22 May, 2029

-
Included w.e.f 01.04.2026

IS 8472 (2019)

Centrifugal regenerative pumps for clear, cold water - Specification (Second Revision)

Upto 2.2 KW

10200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
16.1(Marking)	-	10200	For complete testing
16.1(Marking)	-	10200	For complete testing
16.1(Marking)	-	10200	For complete testing
16.1(Marking)	-	10200	For complete testing
16.1(Marking)	-	10200	For complete testing
16.1(Marking)	-	10200	For complete testing
16.1(Marking)	-	10200	For complete testing
16.1(Marking)	-	10200	For complete testing
16.1(Marking)	-	10200	For complete testing
16.1(Marking)	-	10200	For complete testing
16.1(Marking)	-	10200	For complete testing
16.1(Marking)	-	10200	For complete testing
16.1(Marking)	-	10200	For complete testing
16.1(Marking)	-	10200	For complete testing
16.1(Marking)	-	10200	For complete testing
16.1(Marking)	-	10200	For complete testing
16.1(Marking)	-	10200	For complete testing
16.1(Marking)	-	10200	For complete testing
16.1(Marking)	-	10200	For complete testing
16.1(Marking)	-	10200	For complete testing
16.1(Marking)	-	10200	For complete testing
12.1(Pump Tests Cl.8 of IS 11346-2002 Rate of flow and head Cl.8 of IS 11346-2002)	-	10200	For complete testing
12.1(Pump Tests Cl.8 of IS 11346-2002 Rate of flow and head Cl.8 of IS 11346-2002)	-	10200	For complete testing
12.1(Pump Tests Cl.8 of IS 11346-2002 Efficiency Cl.8.3 of IS 11346-2002)	-	10200	For complete testing
12.3(Hydrostatic Pressure Test)	-	10200	For complete testing
12.3.1(Hydrostatic Pressure Test)	-	10200	For complete testing
12.4(Pump tests)	-	10200	For complete testing
12.5(Self-Priming Test for Self-Priming Pumps)	-	10200	For complete testing
15.1(Guarantee of Workmanship and Material)	-	10200	For complete testing
13.1.2(No Load Test at Rated Voltage)	-	10200	For complete testing
13.1.2.1.1(Temperature Rise Test at Rated Voltage)	-	10200	For complete testing
13.1.2.1.2(Temperature Rise Test at Reduced Voltage)	-	10200	For complete testing
13.1.2(Break away torque Pull up torque)	-	10200	For complete testing
13.1.2(High Voltage test)	-	10200	For complete testing
13.1.2(Insulation Resistance)	-	10200	For complete testing
8(Direction of Rotation)	-	10200	For complete testing
7(Material of Constructional)	-	10200	For complete testing
11.1(General Requirements)	-	10200	For complete testing
13.1.2(Measurement of stator resistance)	-	10200	For complete testing
13.1(Single phase monoset pumps)	-	10200	For complete testing
13.1.2(Locked rotor test(cl.6.2(d) of IS 14582))	-	10200	For complete testing
13(Tests for Electrical Performance)	-	10200	For complete testing
7(Materials of Construction ( Casing/Chamber))	-	10200	For complete testing
7(Materials of Construction ( Impeller))	-	10200	For complete testing
7(Materials of Construction ( Shaft))	-	10200	For complete testing
8.1, 8.2(The direction of rotation of pumps)	-	10200	For complete testing
8.3(The direction of inlet and outlet flow passages)	-	10200	For complete testing
10.1(Design Features)	-	10200	For complete testing
10.1(a)(Design Features(Voltage Rangings))	-	10200	For complete testing
10.1(b)(Design Features(Frequency Rangings))	-	10200	For complete testing
10.1(c)(Design Features(Combination of Voltage and frequency variation))	-	10200	For complete testing
15.2(Guarantee of Performance)	-	10200	For complete testing
15(Guarntee on pump performance and tolerances)	-	10200	For complete testing
11(General Requirements)	-	10200	For complete testing
11.1(The pump shaft should be of adequate size to transmit the required power over the entire head range.)	-	10200	For complete testing
11.2(The pump casing should be of robust construction and shall be tested to withstand hydrostatic pressure as specified in 12.3.)	-	10200	For complete testing
11.3(The nominal size of suction and delivery pipe of the pump shall be as specified in IS 1239 (Part 1),IS 4984, IS 4985 and IS 12231)	-	10200	For complete testing
13.2(Three phase monoset pumps)	-	10200	For complete testing
13.2.2(Measurement of stator resistance test (cl.22.3.1(b) of IS 7538))	-	10200	For complete testing
13.2.2(No load test (cl.22.3.1cb) of IS 7538))	-	10200	For complete testing
13.2.2(Reduced voltage running test (cl.22.3.1(d) of IS 7538))	-	10200	For complete testing
13.2.2(Locked Rotor test (cl.22.3.1(e) of IS 7538))	-	10200	For complete testing
13.2.2(Insulation Resistance test (cl.22.3.1(m) of IS 7538))	-	10200	For complete testing
13.2.2(High Voltage test (cl.22.3.1(n) of IS 7538))	-	10200	For complete testing
15.2.1(Monoset pumps)	-	10200	For complete testing
15.2.1(a)(Discharge, total head, current and input power at the Guarnteed duty point)	-	10200	For complete testing
15.2.1(b)(Non overloading of the prime-mover I the declared operating head range)	-	10200	For complete testing
15.2.1(c)(Rated output of motor)	-	10200	For complete testing
15.2.1(d)(Full load speed of motor)	-	10200	For complete testing
15.2.2(Bare pumps)	-	10200	For complete testing
15.2.1(e)(Overall efficiency of pumpset)	-	10200	For complete testing
15.2.1(f)(Max.self.priming time)	-	10200	For complete testing
15.2.2(a)(Discharge, total head as per Guarnteed duty point at rated voltage and speed)	-	10200	For complete testing
15.2.2(b)(Non overloading of the prime-mover I the declared operating head range)	-	10200	For complete testing
15.2.2(c)(Non-over-rated prime mover recommended by the manufacturer)	-	10200	For complete testing
15.2.2(d)(Max.self.priming time)	-	10200	For complete testing
13.2.2.1.1(Temperature rise test at rated voltage)	-	10200	For complete testing
13.2.2.1.2(Temperature rise test at reduce voltage)	-	10200	For complete testing
13(Type of Enclosures)	-	10200	For complete testing

22 May, 2029

-
Included w.e.f 01.04.2026

IS 694 (2010)

Polyvinyl chloride insulated unsheathed and sheathed cables/cords with rigid and flexible conductor for rated voltages up to and including 450/750 v (Fourth Revision)

30000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
13(Cable code)	-	500	-
11.2(Legibility)	-	500	-
11.1(Durability)	-	500	-
11(Identification)	-	500	-
10.9(Additional ageing test (OU cables only) -HV test (at 60±3oC))	-	3500	-
10.4(Flammability test- Unaffected portion)	-	750	-
10.4(Flammability test-Burning after flame removal)	-	750	-
table 1 e) 3) (IR constant- max. Temp)	-	2000	-
table 1 e) 3) (IR constant- Room temp )	-	2000	-
table 1 e) 3) (Volume Resistivity - Maximum temp)	-	2000	-
table 1 e) 3) (Volume Resistivity - Room temp )	-	2000	-
10.2(HV (room temperature))	-	2000	-
10.1(HV (water immersion))	-	2000	-
10.1(HV (water immersion))	-	3500	-
10.8(Smoke density rating)	-	3500	-
10.6(Halogen evolution)	-	2500	-
10.7(Temperature index)	-	2500	-
10.5(Oxygen index)	-	2500	-
Table 1 iii) d) 9)(Cold impact for sheath)	-	2500	-
Table 1 iii) d) 8)(Cold bend for sheath)	-	1850	-
Table 1 iii) c) 9)(Cold impact for insulation)	-	1850	-
Table 1 iii) c) 8)(Cold bend for insulation)	-	1850	-
Table 1(Category Code)	-	500	-
Table 1 iii) d) 7)(Thermal stability- Sheath )	-	750	-
Table 1 iii) c) 7)(Thermal stability- Insulation )	-	750	-
Table 1 iii) d) 6)(Hot deformation -Indentation depth - Sheath )	-	1000	-
Table 1 iii) c) 6)(Hot deformation - Indentation depth- Insulation)	-	1000	-
Table 1 iii) d) 5)(Heat shock-Sheath )	-	500	-
Table 1 iii) c) 5)(Heat shock-Insulation )	-	500	-
Table 1 iii) d) 4)(Cracks Observed)	-	500	-
Table 1 iii) d) 4)(Shrinkage- Sheath )	-	500	-
Table 1 iii) c) 4)(Cracks Observed)	-	500	-
Table 1 iii) c) 4)(Shrinkage-Insulation)	-	500	-
Table 1 iii) d) 2)(Loss of mass- Sheath )	-	1500	-
Table 1 iii) c) 2)(Loss of mass- Insulation )	-	1500	-
Table 1 iii) d) 3)(Sheath- Elongation variation)	-	500	-
Table 1 iii) d) 3)(Sheath- TS variation)	-	500	-
Table 1 iii) d) 3)(Sheath- Elongation (After ageing))	-	500	-
Table 1 iii) d) 3)(Sheath- Tensile strength (After ageing))	-	500	-
Table 1 iii) d) 1)(Sheath- Elongation (Without ageing))	-	500	-
Table 1 iii) d) 1)(Sheath -Tensile strength (Without ageing))	-	500	-
Table 1 iii) c) 3)(Elongation variation)	-	1000	-
Table 1 iii) c) 3)(TS variation)	-	1000	-
Table 1 iii) c) 3)(Elongation (After ageing))	-	1000	-
Table 1 iii) c) 3)(Tensile strength (After ageing))	-	1000	-
Table 1 iii) c) 1)(Elongation (Without ageing))	-	500	-
Table 1 iii) c) 1)(Tensile strength (Without ageing))	-	500	-
(Cl. 18.1.4) (Cl. 19.1.5) (Cl. 20.1.4) (Cl. 22.1.4)(Colour of Sheath)	-	250	-
8.3(Thickness of Sheath)	-	250	-
5.2(Application )	-	250	-
5.3(Thickness of Insulation)	-	250	-
9.1(Ovality)	-	250	-
9(Overall dimensions)	-	250	-
10.11(Per sulphate test (for tinned Cu cable only))	-	500	-
4.2(Conductor resistance test)	-	1500	-
4.1(Wrapping test (for Al))	-	350	-
4.1(Tensile test (for Al)- After Stranding)	-	500	-
4.1(Tensile test (for Al)-Before Stranding)	-	2500	-
4.1(Annealing test (for copper))	-	350	-
(Cl.6.1.3 of IS 8130:2013)(Flexible Conductors (Classes 5))	-	250	-
(Cl.6.1.3 of IS 8130:2013)( Flexible Conductors (Classes 5))	-	250	-
(Cl.6.1.3 of IS 8130:2013)(Stranded circular non compacted conductors(Class-2))	-	250	-
(Cl.6.1.3 of IS 8130:2013)(Stranded compacted circular conductors and shaped conductors (Class 2))	-	250	-
(Cl.6.1.3 of IS 8130:2013)(Stranded circular non compacted conductors (Class-2))	-	250	-
(Cl.6.1.3 of IS 8130:2013)(Stranded circular non compacted conductors (Class-2))	-	250	-
(Cl.6.1.3 of IS 8130:2013)(Solid Conductor (Class 1))	-	250	-
(Cl.6.1 of IS 8130:2013)(Solid Conductor (Class 1))	-	250	-
(Cl.6.1 of IS 8130:2013)(Solid Conductor (Class 1))	-	250	-
(Cl.16.1) (Cl.19.1)(Conductor- Diameter )	-	250	-
(Cl.16.1) (Cl.19.1)(Conductor)	-	250	-
(Cl.16.1) (Cl.19.1)(Conductor)	-	250	-
(Cl.16.1) (Cl.19.1)(Conductor)	-	250	-
(Cl. 18.1.3) (Cl. 19.1.4) (Cl. 20.1.3) (Cl. 21.1.3) (Cl. 22.1.3)(Assembly of cores )	-	250	-
12(CONSTRUCTION Core Identification)	-	250	-
8.1(Sheath Material )	-	250	-
7(Binder Tape)	-	250	-
6.2(Filler)	-	250	-
6.1(Filler)	-	250	-
5.1(Insulation)	-	250	-
4.4(Joints in Conductor)	-	250	-
4.4(Joints in Conductor)	-	250	-
4.1(Conductor - Material)	-	250	-
4.1(Conductor - Material)	-	250	-
10.11(Persulphate Test )	-	250	-
12.0(Core identification)	-	250	-
4, IS 8130(Construction of conductor)	-	250	-
Table 2, IS 8130(No fo wire in a conductor)	-	250	-
8.3(Minimum thickness of Sheath)	-	250	-
8.3(Avarage thickness of Sheath)	-	250	-
5.3(Minimum thickness of insulation)	-	250	-
5.3(Avarage thickness of insulation)	-	250	-
Table 4(Copper purity test)	-	250	-
10.3(Spark test)	-	250	-
table 1, 4.2(insulation resistance test)	-	2000	-
5.4(Mechanical properties before and after ageing)	-	1000	-
10.3(Spark Test)	-	250	-
4.1(Material)	-	250	-
4.2(Electrical Resistance)	-	2500	-
5(INSULATION)	-	250	-
6(FILLER)	-	250	-
7(BINDER TAPE)	-	250	-
8(SHEATH)	-	250	-
9(OVERALL DIMENSIONS)	-	250	-
10.1(High Voltage Test (Water Immersion Test))	-	2500	-
10.2(High Voltage Test (at Room Temperature))	-	1000	-
10.3(Spark Test)	-	250	-
10.4(Flammability Test)	-	750	-
10.5(Oxygen Index Test)	-	2500	-
10.6(Test for Halogen Acid Gas Evolution)	-	2500	-
10.7(Test for Temperature Index)	-	2500	-
10.8(Smoke Density Rating)	-	2500	-
10.9(Additional Ageing Test (for Cables for Outdoor Use)	-	3500	-
10.1(Flex Test)	-	250	-
10.11(Persulphate Test)	-	250	-
11(IDENTIFICATION)	-	250	-
12(CORE IDENTIFICATION)	-	250	-
13(CABLE CODE)	-	250	-
15(PACKING AND MARKING)	-	250	-
16.1(Construction)	-	250	-
16.2(Tests)	-	250	-
17(SINGLE CORE NON-SHEATHED CABLES WITH FLEXIBLE CONDUCTOR FOR GENERAL PURPOSE (MAXIMUM CONDUCTOR TEMPERATURE 70°C OR 85°C))	-	250	-
18(SINGLE AND MULTICORE CIRCULAR PVC INSULATED AND SHEATHED CABLES WITH RIGID CONDUCTOR (CLASS 1 AND CLASS 2) FOR GENERAL PURPOSE ) FOR MAXIMUM CONDUCTOR TEMPERATURE (70°C OR 85°C))	-	250	-
19(SINGLE AND MULTICORE CIRCULAR PVC INSULATED AND SHEATHED CABLES/CORDS WITH FLEXIBLE CONDUCTOR (CLASS 5) FOR GENERAL PURPOSE (MAXIMUM CONDUCTOR TEMPERATURE 70°C OR 85°C))	-	250	-
20(MULTICORE CIRCULAR PVC INSULATED AND SHEATHED CABLES WITH FLEXIBLE CONDUCTOR (CLASS 5) FOR GENERAL PURPOSE (FOR MAXIMUM CONDUCTOR TEMPERATURE 70°C OR 85°C))	-	250	-
21(ARALLEL TWIN AND TWISTED TWIN FLEXIBLE PVC INSULATED UNSHEATHED CORDS (CLASS 5) FOR GENERAL PURPOSE (FOR MAXIMUM CONDUCTOR TEMPERATURE 70°C OR 85°C))	-	250	-
22(TWO AND THREE CORE FLAT CABLES WITH PVC INSULATION AND SHEATHED (CLASS 2 OR 5) FOR GENERAL PURPOSE( FOR MAXIMUM CONDUCTOR TEMPERA TURE 70°C OR 85°C))	-	250	-
(4.3 of IS 8130:2013)(Form of Conductor)	-	250	-
( 4.4.1 of IS 8130:2013)(Joints in Conductor)	-	250	-
(4.4.2 of IS 8130:2013)(Joints in Conductor Solid Conductors (Aluminium Conductors only))	-	250	-
(Cl.6.1.1 of IS 8130:2013)(Solid Conductor (Class 1))	-	250	-
(Cl.6.1.2 of IS 8130:2013)(Solid Conductor (Class 1))	-	250	-
(Cl.6.1.3 of IS 8130:2013)(Solid Conductor (Class 1))	-	250	-
(6.2.1 of IS 8130:2013)(Stranded Circular Non-compacted Conductors (Class 2))	-	250	-
(6.2.2 of IS 8130:2013)(Stranded Circular Non-compacted Conductors (Class 2))	-	250	-
(6.2.3 of IS 8130:2013)(Stranded Circular Non-compacted Conductors (Class 2))	-	250	-
(6.3.1 of IS 8130:2013)(Stranded Compacted Circular Conductors and Shaped Conductors (Class 2))	-	250	-
(6.3.2 of IS 8130:2013)(Stranded Compacted Circular Conductors and Shaped Conductors (Class 2))	-	250	-
(6.3.3 of IS 8130:2013)(Stranded Compacted Circular Conductors and Shaped Conductors (Class 2))	-	250	-
( 6.4.1 of IS 8130:2013)(Flexible Conductors (Class 5))	-	250	-
(6.4.2 of IS 8130:2013)(Flexible Conductors (Class 5))	-	250	-
( 6.4.3 of IS 8130:2013)(Flexible Conductors (Class 5))	-	250	-
Cl.19.1.4(Assembly of Cores)	-	250	-
Cl. 8.2(Application of Sheath)	-	250	-

22 May, 2029

-
included w.e.f 24.03.2026

IS 16205 : Part 24 (2017)

Conduit Systems for Cable Management part 24 Particular Requirements Conduit Systems Buried Under Ground

Except EMI/EMC

33500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1.1(Classification - Resistance to Compression)	-	5000	-
6.1.2(Classification - Resistance to Impact)	-	5000	-
6.1.3(Classification - Resistance to Bending)	-	5000	-
6.1.4 of IS 16205 (Part 1) : 2017(Classification - Tensile Strength)	-	3500	For complete dimensions and other qualitative tests
6.1.5 of IS 16205 (Part 1) : 2017(Classification - Suspended Load Capacity)	-	5000	-
6.3 of IS 16205 (Part 1) : 2017(Classification - According to Electrical Characteristics)	-	5000	-
6.4 of IS 16205 (Part 1) : 2017(Classification - According to Resistance to External Influences)	-	5000	-
6.5 of IS 16205 (Part 1) : 2017(Classification - According to Resistance to Flame Propogation)	-	0	-
7.1(Marking and Documentation)	-	0	-
7.1.2(Marking and Documentation)	-	0	-
7.1.3(Marking and Documentation)	-	0	-
7.1.101(Marking and Documentation)	-	0	-
7.2(Marking and Documentation)	-	0	-
7.5 of IS 16205 (Part 1) : 2017(Marking and Documentation)	-	0	-
7.6 of IS 16205 (Part 1) : 2017(Marking and Documentation)	-	0	-
7.101(Marking and Documentation)	-	0	-
7.102(Marking and Documentation)	-	0	-
8 Table 101(Dimensions)	-	0	-
8 Table 101(Dimensions)	-	3500	For dimensions and other qualitative tests
9.1 of IS 16205 (Part 1) : 2017(Construction)	-	0	-
9.2 of IS 16205 (Part 1) : 2017(Construction)	-	0	-
9.4 of IS 16205 (Part 1) : 2017(Construction)	-	0	-
9.5 of IS 16205 (Part 1) : 2017(Construction)	-	0	-
9.6 of IS 16205 (Part 1) : 2017(Construction)	-	0	-
10.1(Mechanical Strength)	-	0	-
10.2(Compression Test)	-	0	-
10.3(Impact Test)	-	0	-
10.4(Bending Test)	-	0	-
13.1.3(Spread of fire)	-	0	-
13.1.3.1(Spread of fire)	-	0	-
13.1.3.2(Spread of fire)	-	0	-
14.0(External Influences)	-	0	-
14.2 of IS 16205 (Part 1) : 2017(Resistance against corrosion)	-	0	-
15.0(Electromagnetic Compatibility)	-	0	-
15(Mech)(Electromagnetic Compatibility)	-	0	-
14.2 of IS 16205 (Part 1) : 2017(Mech)(Resistance against corrosion)	-	0	-
14(Mech)(External Influences)	-	0	-
13.1.3.2(Mech)(Spread of fire)	-	0	-
13.1.3.1(Mech)(Spread of fire)	-	0	-
13.1.3(Mech)(Spread of fire)	-	0	-
10.4(Mech)(Bending Test)	-	0	-
10.3(Mech)(Impact Test)	-	0	-
10.2(Mech)(Compression Test)	-	0	-
10.1(Mech)(Mechanical Strength )	-	0	-
9.6 of IS 16205 (Part 1) : 2017(Mech)(Construction)	-	0	-
9.5 of IS 16205 (Part 1) : 2017(Mech)(Construction)	-	0	-
9.4 of IS 16205 (Part 1) : 2017(Mech)(Construction)	-	0	-
9.2 of IS 16205 (Part 1) : 2017(Mech)(Construction)	-	0	-
9.1 of IS 16205 (Part 1) : 2017(Mech)(Construction)	-	0	-
8 Table 101(Mech)(Dimensions)	-	0	-
8 Table 101(Mech)(Dimensions)	-	0	-
7.102(Mech)(Marking and Documentation)	-	0	-
7.101(Mech)(Marking and Documentation)	-	0	-
7.6 of IS 16205 (Part 1) : 2017(Mech)(Marking and Documentation)	-	0	-
7.5 of IS 16205 (Part 1) : 2017(Mech)(Marking and Documentation)	-	0	-
7.2(Mech)(Marking and Documentation)	-	0	-
7.1.101(Mech)(Marking and Documentation)	-	0	-
7.1.3(Mech)(Marking and Documentation)	-	0	-
7.1.2(Mech)(Marking and Documentation)	-	0	-
7.1(Mech)(Marking and Documentation)	-	0	-
6.5 of IS 16205 (Part 1) : 2017(Mech)(Classification - According to Resistance to Flame Propogation)	-	0	-
6.4 of IS 16205 (Part 1) : 2017(Mech)(Classification - According to Resistance to External Influences)	-	0	-
6.3 of IS 16205 (Part 1) : 2017(Mech)(Classification - According to Electrical Characteristics)	-	0	-
6.1.5 of IS 16205 (Part 1) : 2017(Mech)(Classification - Suspended Load Capacity)	-	0	-
6.1.4 of IS 16205 (Part 1) : 2017(Mech)(Classification - Tensile Strength)	-	0	-
6.1.3(Mech)(Classification - Resistance to Bending)	-	0	-
6.1.2(Mech)(Classification - Resistance to Impact)	-	0	-
6.1.1 (Mech)(Classification - Resistance to Compression)	-	0	-

22 May, 2029

-
1. 6.4 of IS 16205 (Part 1) : 2017(Mech) (Classification - According to Resistance to External Influences) Resistance to external influence Except EMC Testing

IS 16542 (2016)

Direct insertion type storage water tank for all glass evacuated tubes solar collector - Specification

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.3(Ideal Heating Test)	-	5000	-
8.2(Leakage Test)	-	5000	-
8.4(Integral Test)	-	5000	-
8.5(Performance Test)	-	5000	-
7.6(Thermal Shock Test for Inner Sealing)	-	5000	-
7.7(Thermal Shock Test for outer Sealing)	-	5000	-
6(GENERAL REQUIREMENTS)	-	5000	-
8.1(Measurement of Storage Water Tank Capacity)	-	5000	-

22 May, 2029

-
included w.e.f 16.03.2026

IS 3614 (2021)

Specification of Fire Doors and Assembly First Revision of IS 3614 Parts 1 2

350000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Integrity, Insulation)	-	350000	-
Cl 7.2.2(SIZE (width))	-	1000	-
Cl 7.2.2(SIZE (Height))	-	1000	-
Cl 7.3.2(SIZE (width))	-	1000	-
Cl 7.3.2(SIZE (Height))	-	1000	-
Cl 7.4.2(SIZE (width))	-	1000	-
Cl 7.4.2(SIZE (Height))	-	1000	-
Cl 7.5.2(SIZE (width))	-	1000	-
Cl 7.5.2(SIZE (Height))	-	1000	-
7.3.1(MOISTURE CONTENT)	-	3000	-
7.2.7(Vision Pane (Uninsulated door) Width)	-	1000	-
7.2.7(Vision Pane (Uninsulated door) Height)	-	1000	-
7.2.7(Vision Pane (Insulated door) Width)	-	1000	-
7.2.7(Vision Pane (Insulated door) Height)	-	1000	-
7.3.4(Vision Pane (Width))	-	1000	-
7.3.4(Vision Pane (Height))	-	1000	-
Cl-7.2.1(Material)	-	2500	-
Cl-7.2.4(Fire Door Frames)	-	1000	-
Cl-7.2.5(Door Leaf)	-	1000	-
Cl-7.2.8(Louvres)	-	1000	-
Cl-7.2.9(Builder’s Hardware)	-	1000	-
Cl-7.4.3(Construction)	-	1000	-
Cl-7.4.5(Operator)	-	1000	-
Cl-7.5.1(Material)	-	2500	-
Cl-7.5.3(Construction of Sliding Door Leaf)	-	1000	-
Cl-11.3.1(Walls)	-	1000	-
Cl-11.4.1(Closing Devices)	-	1000	-
Cl-11.4.2(Releasing Devices)	-	1000	-
Cl-11.4.3(Hardware)	-	1000	-
Cl-6(VISION PANE ON FIRE DOORS)	-	2000	-
Cl-7.2.3(Construction)	-	2000	-
Cl-7.2.6(Intumescent Seal)	-	1000	-
Cl-7.3.6(Builder’s Hardware)	-	1000	-
Cl-7.4.4(General Requirement of Fire Rated Rolling Shutter)	-	1000	-
Cl-7.5.4(General Requirement of Fire Rated Sliding Door)	-	1000	-
Cl-7.6(General Requirement of Fire Doors)	-	1000	-
Cl-7.3.3(Construction)	-	1000	-
Cl-7.4(Avg closing speed of fire rated rolling shutters)	-	1000	-

22 May, 2029

-
included w.e.f 16.03.2026

IS 2553 : Part 2 (2019)

Safety glass - Specification: Part 2 for road transport (First Revision)

24000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1.1(Light Transmittance)	-	24000	Complete testing charges for Toughened safety glass for Panes- Rs. 24,000/- Complete testing charges for Laminated safety glass for Panes- Rs. 79,500/-
5.1.1(Light Transmittance)	-	24000	Complete testing charges for Laminated safety glass for Windscreen- Rs. 89,500/- Complete testing charges for Plastic Glazing Materials- Rs. 1,45,500/-
5.1.2.1(Resistance to Abrasion)	-	0	Except: Resistance to abrasion, Resistance to temperature changes, resistance to radiation, optical distortion, image separation, Head form, Flexibility and Fold, Weathering and cross cut.
5.1.2.2(Resistance to Abrasion)	-	0	Except: Resistance to abrasion, Resistance to temperature changes, resistance to radiation, optical distortion, image separation, Head form, Flexibility and Fold, Weathering and cross cut.
5.1.2.3.1(Resistance to Abrasion)	-	0	Except: Resistance to abrasion, Resistance to temperature changes, resistance to radiation, optical distortion, image separation, Head form, Flexibility and Fold, Weathering and cross cut.
5.1.2.3.1(Resistance to Abrasion)	-	0	Except: Resistance to abrasion, Resistance to temperature changes, resistance to radiation, optical distortion, image separation, Head form, Flexibility and Fold, Weathering and cross cut.
5.1.2.3.2(Resistance to Abrasion)	-	0	Except: Resistance to abrasion, Resistance to temperature changes, resistance to radiation, optical distortion, image separation, Head form, Flexibility and Fold, Weathering and cross cut.
5.1.2.3.2(Resistance to Abrasion)	-	0	Except: Resistance to abrasion, Resistance to temperature changes, resistance to radiation, optical distortion, image separation, Head form, Flexibility and Fold, Weathering and cross cut.
5.2.1(Resistance to Temperature Changes)	-	0	Except: Resistance to abrasion, Resistance to temperature changes, resistance to radiation, optical distortion, image separation, Head form, Flexibility and Fold, Weathering and cross cut.
5.2.2(a) Resistance to Fire)	-	24000	Complete testing charges for Laminated safety glass for Windscreen- Rs. 89,500/- Complete testing charges for Plastic Glazing Materials- Rs. 1,45,500/-
5.2.2(b) Resistance to Fire)	-	24000	Complete testing charges for Toughened safety glass for Panes- Rs. 24,000/- Complete testing charges for Laminated safety glass for Panes- Rs. 79,500/-
5.3.1 (Resistance to Radiation)	-	0	-
5.3.2(Resistance to High Temperature)	-	24000	Complete testing charges for Toughened safety glass for Panes- Rs. 24,000/- Complete testing charges for Laminated safety glass for Panes- Rs. 79,500/-
5.3.3.1(Resistance to Humidity)	-	24000	Complete testing charges for Laminated safety glass for Windscreen- Rs. 89,500/- Complete testing charges for Plastic Glazing Materials- Rs. 1,45,500/-
5.3.3.2(Resistance to Humidity)	-	24000	Complete testing charges for Toughened safety glass for Panes- Rs. 24,000/- Complete testing charges for Laminated safety glass for Panes- Rs. 79,500/-
5.3.3.2(Resistance to Humidity)	-	24000	Complete testing charges for Laminated safety glass for Windscreen- Rs. 89,500/- Complete testing charges for Plastic Glazing Materials- Rs. 1,45,500/-
5.3.3.3(Resistance to Humidity)	-	24000	Complete testing charges for Toughened safety glass for Panes- Rs. 24,000/- Complete testing charges for Laminated safety glass for Panes- Rs. 79,500/-
5.4.1(Optical Distortion)	-	0	-
5.4.1.3 (Optical Distortion)	-	0	-
5.4.2(Secondary image separation test-Vehicle Category M1 and N -Zone A)	-	0	-
5.4.2(Secondary image separation test-Vehicle Category M1 and N -Zone B)	-	0	-
5.4.2(Secondary image separation test-Vehicle Category L -Zone Primary area)	-	0	-
5.4.2(Secondary image separation test-Vehicle Category L -Zone Secondary area)	-	0	-
5.4.2(Secondary image separation test-Vehicle Category M2 , M3 and N -central area)	-	0	-
5.4.2.3(Secondary image separation test)	-	0	-
5.4.3.1(Head-form Test (Location of crack))	-	0	-
5.4.3.2(Head-form Test (Interlayer adhesion))	-	0	-
5.4.3.3.1(Head-form Test)	-	0	-
5.4.3.3.2(Head-form Test)	-	0	-
5.4.4(2.260 g Ball)	-	24000	Complete testing charges for Laminated safety glass for Windscreen- Rs. 89,500/- Complete testing charges for Plastic Glazing Materials- Rs. 1,45,500/-
5.4.5.1(227 g Ball)	-	24000	Complete testing charges for Toughened safety glass for Panes- Rs. 24,000/- Complete testing charges for Laminated safety glass for Panes- Rs. 79,500/-
5.4.5.2(227 g Ball)	-	24000	Complete testing charges for Laminated safety glass for Windscreen- Rs. 89,500/- Complete testing charges for Plastic Glazing Materials- Rs. 1,45,500/-
5.4.5.3(227 g Ball)	-	24000	Complete testing charges for Toughened safety glass for Panes- Rs. 24,000/- Complete testing charges for Laminated safety glass for Panes- Rs. 79,500/-
5.4.5.4(227 g Ball)	-	24000	Complete testing charges for Laminated safety glass for Windscreen- Rs. 89,500/- Complete testing charges for Plastic Glazing Materials- Rs. 1,45,500/-
5.5.1.1.1(Fragmentation Test)	-	24000	Complete testing charges for Toughened safety glass for Panes- Rs. 24,000/- Complete testing charges for Laminated safety glass for Panes- Rs. 79,500/-
5.5.1.1.4(Fragmentation Test)	-	24000	Complete testing charges for Laminated safety glass for Windscreen- Rs. 89,500/- Complete testing charges for Plastic Glazing Materials- Rs. 1,45,500/-
5.5.1.1.5(Fragmentation Test)	-	24000	Complete testing charges for Toughened safety glass for Panes- Rs. 24,000/- Complete testing charges for Laminated safety glass for Panes- Rs. 79,500/-
5.5.1.1.5.1(Fragmentation Test)	-	24000	Complete testing charges for Laminated safety glass for Windscreen- Rs. 89,500/- Complete testing charges for Plastic Glazing Materials- Rs. 1,45,500/-
5.5.1.1.5.2(Fragmentation Test)	-	24000	Complete testing charges for Toughened safety glass for Panes- Rs. 24,000/- Complete testing charges for Laminated safety glass for Panes- Rs. 79,500/-
5.5.1.2(227 g ball test)	-	24000	Complete testing charges for Laminated safety glass for Windscreen- Rs. 89,500/- Complete testing charges for Plastic Glazing Materials- Rs. 1,45,500/-
5.5.2.1.1(227 g ball test)	-	24000	Complete testing charges for Toughened safety glass for Panes- Rs. 24,000/- Complete testing charges for Laminated safety glass for Panes- Rs. 79,500/-
5.5.2.1.2(227 g ball test)	-	24000	Complete testing charges for Laminated safety glass for Windscreen- Rs. 89,500/- Complete testing charges for Plastic Glazing Materials- Rs. 1,45,500/-
5.5.2.1.3(227 g ball test)	-	24000	Complete testing charges for Toughened safety glass for Panes- Rs. 24,000/- Complete testing charges for Laminated safety glass for Panes- Rs. 79,500/-
5.5.3.1(equirements Applicable only to Double-Glazed Units-Individual components)	-	0	-
5.5.3.2.1( Head-form Test)	-	0	-
5.5.3.2.2.1( Head-form Test)	-	0	-
5.5.3.2.2.2( Head-form Test)	-	0	-
5.5.3.2.2.3( Head-form Test)	-	0	-
5.5.3.2.3-a( Head-form Test)	-	0	-
5.5.3.2.3-b-1( Head-form Test)	-	0	-
5.5.3.2.3-b-2( Head-form Test)	-	0	-
5.5.3.2.3-b-3( Head-form Test)	-	0	-
5.6.1.7( Head-form Test)	-	0	-
5.6.1.8( Head-form Test-The HIC value )	-	0	-
5.6.2.4-a(Mechanical Strength Test — 227g Ball)	-	24000	Complete testing charges for Laminated safety glass for Windscreen- Rs. 89,500/- Complete testing charges for Plastic Glazing Materials- Rs. 1,45,500/-
5.6.2.4-b(Mechanical Strength Test — 227g Ball)	-	24000	Complete testing charges for Toughened safety glass for Panes- Rs. 24,000/- Complete testing charges for Laminated safety glass for Panes- Rs. 79,500/-
5.6.2.5(Mechanical Strength Test — 227g Ball test at –18° ± 2°C)	-	24000	Complete testing charges for Laminated safety glass for Windscreen- Rs. 89,500/- Complete testing charges for Plastic Glazing Materials- Rs. 1,45,500/-
5.6.2.5(Mechanical Strength Test — 227g Ball test at –18° ± 2°C)	-	24000	Complete testing charges for Toughened safety glass for Panes- Rs. 24,000/- Complete testing charges for Laminated safety glass for Panes- Rs. 79,500/-
5.6.3.3(Flexibility and Fold Test)	-	0	-
5.6.4.4-a(Weathering)	-	0	-
5.6.4.4-b(Weathering)	-	0	-
5.6.5.3-a(Cross-cut)	-	0	-
5.6.5.3-b-1(Cross-cut)	-	0	-
5.7.1.1(227 g Ball Test at 20 ± 5°C)	-	24000	Complete testing charges for Toughened safety glass for Panes- Rs. 24,000/- Complete testing charges for Laminated safety glass for Panes- Rs. 79,500/-
5.7.2.1(227g Ball Test at –18° ± 2°C)	-	24000	Complete testing charges for Laminated safety glass for Windscreen- Rs. 89,500/- Complete testing charges for Plastic Glazing Materials- Rs. 1,45,500/-
5.7.3.1(Flexibility Test and Fold Test)	-	0	-
5.7.3.1(Flexibility Test and Fold Test)	-	0	-
5.4.5(227 g Ball test)	-	24000	Complete testing charges for Toughened safety glass for Panes- Rs. 24,000/- Complete testing charges for Laminated safety glass for Panes- Rs. 79,500/-
As per Clause 3.7(Wind screen and Panes)	-	0	-
As per Clause 4.1(Wind screen and Panes)	-	0	-
As per Clause 5.8.2(Wind screen)	-	0	-
As per Clause 5.8.3(Wind screen)	-	0	-

22 May, 2029

-
-

IS 456 (2000)

Plain and reinforced concrete - Code of practice (Fourth Revision)

For Compression and Construction water

4000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.4-Table-1 (v)-IS: 3025(P-17)(Suspended matter)	-	4000	For compressive strength: 4000 For construction water: 6500
5.4-Table-1 (iv)-IS: 3025(P-32)(Chloride)	-	4000	For compressive strength: 4000 For construction water: 6500
5.4-Table-1 (iii)-IS: 3025(P-32)(Chloride)	-	4000	For compressive strength: 4000 For construction water: 6500
5.4-Table-1 (ii)-IS: 3025(P-24)(Sulphate)	-	4000	For compressive strength: 4000 For construction water: 6500
5.4-Table-1 (i)-IS: 3025(P-18)(In-Organic)	-	4000	For compressive strength: 4000 For construction water: 6500
5.4-Table-1 (i)-IS: 3025(P-18)(Organic )	-	4000	For compressive strength: 4000 For construction water: 6500
5.4.2-IS: 3025(P-11)(Ph)	-	4000	For compressive strength: 4000 For construction water: 6500
5.4-(b)-IS: 3025 (P-23)(Volume of 0.02 N H2SO4 to neutralized 100 ml of water using mixed indicator)	-	4000	For compressive strength: 4000 For construction water: 6500
5.4-(a)-IS: 3025 (P-22)(Volume of 0.02 N NaOH to neutralized 100 ml of water using phenolphthalein indicator)	-	4000	For compressive strength: 4000 For construction water: 6500
Cl 5.4 Table 1 (v)(Suspended Matter)	-	4000	For compressive strength: 4000 For construction water: 6500
Cl 5.4 Table 1 (iv)(Chloride)	-	4000	For compressive strength: 4000 For construction water: 6500
Cl 5.4 Table 1 (iii)(Sulphate)	-	4000	For compressive strength: 4000 For construction water: 6500
Cl 5.4 Table 1 (ii)(Inorganic Solids)	-	4000	For compressive strength: 4000 For construction water: 6500
Cl 5.4 Table 1 (i)(Organic Solids)	-	4000	For compressive strength: 4000 For construction water: 6500
Cl 5.4 .2(pH)	-	4000	For compressive strength: 4000 For construction water: 6500
Cl 5.4 (b)(Alkalinity)	-	4000	For compressive strength: 4000 For construction water: 6500
Cl 5.4 (a)(Acidity)	-	4000	For compressive strength: 4000 For construction water: 6500
16.1(Average Compressive Strength)	-	4000	For compressive strength: 4000 For construction water: 6500
16.1(Compressive Strength of Individual Samples )	-	4000	For compressive strength: 4000 For construction water: 6500
16.1(Compressive Strength of Individual Samples )	-	4000	For compressive strength: 4000 For construction water: 6500
16.1(Compressive Strength of Individual Samples )	-	4000	For compressive strength: 4000 For construction water: 6500
Clause 5.4(Description)	-	0	-
5.2(Mineral Admixtures)	-	0	-
5.3(Aggregates)	-	0	-
5.7(Storage of Materials)	-	0	-

22 May, 2029

-
-

IS 383 (2016)

Coarse and Fine Aggregate for Concrete - Specification (Third Revision)

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.4.1 (a)(mechanical properties- Aggregate Crushing Value/Ten Percent Fines Value)	-	12000	-
5.4.1 (b)(mechanical properties- Aggregate Crushing Value/Ten Percent Fines Value)	-	12000	-
5.4.2(a)( Aggregates Impact Value)	-	12000	-
5.4.2(b)( Aggregates Impact Value)	-	12000	-
5.4.3(a)( Aggregate Abrasion Value)	-	12000	-
5.4.3(b)( Aggregate Abrasion Value)	-	12000	-
6.1-Table 7(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Nominal Size of aggregate)	-	12000	-
6.1-Table 7(i)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 80 mm sieve )	-	12000	-
6.1-Table 7(ii)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 63 mm sieve )	-	12000	-
6.1-Table 7(iii)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 40 mm sieve )	-	12000	-
6.1-Table 7(iv)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 20 mm sieve )	-	12000	-
6.1-Table 7(v)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 16 mm sieve )	-	12000	-
6.1-Table 7(vi)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 12.5 mm sieve )	-	12000	-
6.1-Table 7(vii)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 10 mm sieve )	-	12000	-
6.1-Table 7(viii)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 4.75 mm sieve )	-	12000	-
6.1-Table 7(ix)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 2.36 mm sieve )	-	12000	-
6.1.1-Table 8(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Class)	-	12000	-
6.1.1-Table 8(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Size)	-	12000	-
6.1.1-Table 8(i)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 160 mm Sieve)	-	12000	-
6.1.1-Table 8(i)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 80 mm Sieve)	-	12000	-
6.1.1-Table 8(ii)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 80 mm Sieve)	-	12000	-
6.1.1-Table 8(ii)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 40 mm Sieve)	-	12000	-
6.1.1-Table 8(iii)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 40 mm Sieve)	-	12000	-
6.1.1-Table 8(iii)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 20 mm Sieve)	-	12000	-
6.1.1-Table 8(iv)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 20 mm Sieve)	-	12000	-
6.1.1-Table 8(iv)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 4.75 mm Sieve)	-	12000	-
6.1.1-Table 8(iv)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 2.36 mm Sieve)	-	12000	-
6.2-Table 7(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Nominal Size of aggregate)	-	12000	-
6.2-Table 7(i)(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Percentage Passing through 80 mm sieve)	-	12000	-
6.2-Table 7(ii)(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Percentage Passing through 63 mm sieve)	-	12000	-
6.2-Table 7(iii)(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Percentage Passing through 40 mm sieve)	-	12000	-
6.2-Table 7(iv)(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Percentage Passing through 20 mm sieve)	-	12000	-
6.2-Table 7(v)(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Percentage Passing through 16 mm sieve)	-	12000	-
6.2-Table 7(vi)(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Percentage Passing through 12.5 mm sieve)	-	12000	-
6.2-Table 7(vii)(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Percentage Passing through 10 mm sieve)	-	12000	-
6.2-Table 7(viii)(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Percentage Passing through 4.75 mm sieve)	-	12000	-
6.2-Table 7(ix)(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Percentage Passing through 2.36 mm sieve)	-	12000	-
6.3-Table 9(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Grading Zone)	-	12000	-
6.3-Table 9(i)(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Percentage Passing through 10mm Sieve )	-	12000	-
6.3-Table 9(ii)(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Percentage Passing through 4.75mm Sieve )	-	12000	-
6.3-Table 9(iii)(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Percentage Passing through 2.36mm Sieve )	-	12000	-
6.3-Table 9(iv)(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Percentage Passing through 1.18mm Sieve )	-	12000	-
6.3-Table 9(v)(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Percentage Passing through 600µm Sieve )	-	12000	-
6.3-Table 9(vi)(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Percentage Passing through 300µm Sieve )	-	12000	-
6.3-Table 9(vii)(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Percentage Passing through 150µm Sieve )	-	12000	-
6.4-Table 10(SIZE AND GRADING OF AGGREGATES- All-in-Aggregate Grading-Nominal Size )	-	12000	-
6.4-Table 10(i)(SIZE AND GRADING OF AGGREGATES- All-in-Aggregate Grading-Percentage Passing through 80mm Sieve )	-	12000	-
6.4-Table 10(ii)(SIZE AND GRADING OF AGGREGATES- All-in-Aggregate Grading-Percentage Passing through 40mm Sieve )	-	12000	-
6.4-Table 10(iii)(SIZE AND GRADING OF AGGREGATES- All-in-Aggregate Grading-Percentage Passing through 20mm Sieve )	-	12000	-
6.4-Table 10(iv)(SIZE AND GRADING OF AGGREGATES- All-in-Aggregate Grading-Percentage Passing through 4.75mm Sieve )	-	12000	-
6.4-Table 10(v)(SIZE AND GRADING OF AGGREGATES- All-in-Aggregate Grading-Percentage Passing through 600µm Sieve )	-	12000	-
6.4-Table 10(vi)(SIZE AND GRADING OF AGGREGATES- All-in-Aggregate Grading-Percentage Passing through 150µm Sieve )	-	12000	-
5.7-Table-3-(v) IS: 2386 (P-3)(specific gravity(fine aggregate))	-	12000	-
5.7-Table-3-(Iv) IS: 2386 (P-3)(Water absorption (fine aggregate))	-	12000	-
5.7-Table-3-(III) IS:14959 (P-2)(Water soluble chloride content (fine aggregate))	-	12000	-
5.7-Table-3-(II) IS:4032(Total sulphate content (fine aggregate))	-	12000	-
5.6-IS: 2386 (P-7)(Alkali Aggregate Reaction (fine aggregate))	-	12000	-
5.5-IS: 2386 (P-5)(Soundness (fine aggregate))	-	12000	-
5.2- TABLE-2- (Note-3) IS-2386 (P-2)(Mica content (fine aggregate))	-	12000	-
5.2- TABLE-2- (Note-4) IS-2386 (P-2)(Effect of organic impurities on strength of mortar (fine aggregate))	-	12000	-
5.2- TABLE-2- (Note-4) IS-2386 (P-2)(Effect of organic impurities on strength of mortar (fine aggregate))	-	12000	-
5.2- TABLE-2- (Note-4) IS-2386 (P-2)(Organic impurities (fine aggregate))	-	12000	-
5.2- TABLE-2- (vi) IS-2386 (P-2)(Total deleterious material (fine aggregate))	-	12000	-
5.2- TABLE-2- (iii) IS-2386 (P-1)(Material fine aggregater than 75 micron (fine aggregate))	-	12000	-
5.2- TABLE-2- (ii) IS-2386 (P-2)(Clay lumps (fine aggregate ))	-	12000	-
5.2- TABLE-2- (i) IS-2386 (P-2)(Coal and Lignite (fine aggregate ))	-	12000	-
5.7-Table-3-(v) IS: 2386 (P-3)(specific gravity(coarse aggregate))	-	12000	-
5.7-Table-3-(Iv) IS: 2386 (P-3)(Water absorption (coarse aggregate))	-	12000	-
5.7-Table-3-(III) BN EN: 1744(Water soluble chloride content (coarse aggregate))	-	12000	-
5.7-Table-3-(II) BN EN: 1744(Total sulphate content (coarse aggregate))	-	12000	-
5.6-IS: 2386 (P-7)(Alkali Aggregate Reaction (coarse aggregate))	-	12000	-
5.5-IS: 2386 (P-5)(Soundness (coarse aggregate))	-	12000	-
5.3-IS: 2386 (P-1)(Combined elongation & flakiness index (coarse aggregate))	-	12000	-
5.2- TABLE-2- (vi) IS-2386 (P-2)(Total deleterious material (coarse aggregate))	-	12000	-
5.2- TABLE-2- (iv) IS-2386 (P-2)(Soft fragments (coarse aggregate))	-	12000	-
5.2- TABLE-2- (iii) IS-2386 (P-1)(Material fine aggregater than 75 micron (coarse aggregate))	-	12000	-
5.2- TABLE-2- (ii) IS-2386 (P-2)(Clay lumps (coarse aggregate ))	-	12000	-
5.2- TABLE-2- (i) IS-2386 (P-2)(Coal and Lignite (coarse aggregate ))	-	12000	-
5.5(Soundness By Magnesium Sulphate)	-	12000	-
7.2(Moisture Content)	-	12000	-
7.2(Bulking Of Fine Aggregate)	-	12000	-
7.2(Bulk Density loose)	-	12000	-
7.2(Bulk Density Rodded)	-	12000	-
5.5(Soundness By Magnesium Sulphate)	-	12000	-
7.2(Moisture Content)	-	12000	-
7.2(Bulk Density loose)	-	12000	-
7.2(Bulk Density Rodded)	-	12000	-
5.3(Elongation Index)	-	12000	-
5.3(Flakiness Index)	-	12000	-
5.6(Alkali Agregate Reaction )	-	12000	-
5.7 table 3(WaterAbsorption)	-	12000	-
5.7 table 3(Specific Gravity)	-	12000	-
5.3(Flakiness & Elongation)	-	12000	-
5.5 Na2so4/5.5.1 Maso4/5.5.1 (Soundness)	-	12000	-
5.7 table 4 (Calcium oxide)	-	12000	-
5.5 Na2so4/5.5.1 Maso4/5.5.1 (Soundness)	-	12000	-
5.2 (5.2.2, 5.2.1, 5.2.3, shale table-2 ) (Deleterious material (Clay lumps, coal & lignite, material finer than 75 micron IS sieve, Soft fragments,shale))	-	12000	-
3.2.2 Table 3 ii) IS 1963(Basicity as CaO/SiO2)	-	12000	-
Clause 5.7- Table 3 (i) (TotalAlkali content as Na2O equivalent )	-	12000	-
Clause 5.6(Nature of Aggregate)	-	12000	-
Clause 5.6(Dissolved Silica)	-	12000	-
Clause 5.6(Reduction in Alkalinity)	-	12000	-
Clause 5.1(General)	-	12000	-
Clause 5.1(General)	-	12000	-
Table 4 Cl. 5.7 (ii)(Total Sulphur as S)	-	12000	-
Table 4 Cl. 5.7 (iii)(Total iron as FeO)	-	12000	-
Table 5 Cl. 5.7 (i)(Calcium oxide as CaO,)	-	12000	-
Table 5 Cl. 5.7 (ii)(Magnesium oxide as MgO)	-	12000	-
Table 5 Cl. 5.7 (iii)(Total iron as FeO)	-	12000	-
Table 5 Cl. 5.7 (iv)(Basicity as CaO/SiO2)	-	12000	-
Table 6 Cl. 5.7 (i)(Calcium oxide as CaO)	-	12000	-
Table 6 Cl. 5.7 (ii)(Total sulphur as S)	-	12000	-
Table 6 Cl. 5.7 (iii)(Total iron as FeO)	-	12000	-
Table 6 Cl. 5.7 (iv)()	-	12000	-
Table 6 Cl. 5.7 (iv)()	-	12000	-

22 May, 2029

-
Included w.e.f. 02.03.2026

IS 4996 (1984)

Specification for reinforced concrete fence posts (First Revision)

39950 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1.1(MANUFACTURE-Construction and Finish )	-	39950	For complete testing
4.1.2(MANUFACTURE-Construction and Finish )	-	39950	For complete testing
4.2.1(MANUFACTURE-Reinforcement-Preparation)	-	39950	For complete testing
4.2.1(MANUFACTURE-Reinforcement-Preparation)	-	39950	For complete testing
4.2.2(MANUFACTURE-Reinforcement-Positioning)	-	39950	For complete testing
4.2.2(MANUFACTURE-Reinforcement-Positioning)	-	39950	For complete testing
4.2.2(MANUFACTURE-Reinforcement-Positioning)	-	39950	For complete testing
4.2.3(MANUFACTURE-Reinforcement-Anchorage)	-	39950	For complete testing
4.2.4(MANUFACTURE-Reinforcement-Cover)	-	39950	For complete testing
4.2.4(MANUFACTURE-Reinforcement-Cover)	-	39950	For complete testing
4.2.4(MANUFACTURE-Reinforcement-Cover)	-	39950	For complete testing
4.2.4.1(MANUFACTURE-Reinforcement-Cover)	-	39950	For complete testing
5(SHAPE AND DIMENSIONS)	-	39950	For complete testing
7.1(STRENGTH OF REINFORCED CONCRETE FENCE POSTS-Impact Test)	-	39950	For complete testing
7.2(STRENGTH OF REINFORCED CONCRETE FENCE POSTS-Static Load Test)	-	39950	For complete testing

22 May, 2029

-
Included w.e.f 22.01.2026

IS 996 (2025)

SINGLE PHASE ac INDUCTION MOTORS FOR GENERAL PURPOSE (Fouth Revision)

17250 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-7(Dimensions)	-	450	-
Cl-9.1(Mounting)	-	100	-
Cl-9.2(Terminal Box)	-	100	-
Cl-9.3(Mounting Constructions)	-	100	-
Cl-9.3(Mounting Constructions)	-	100	-
Cl-9.4(Constructional Features)	-	100	-
Cl-9.5(Earthing)	-	200	-
Cl-10.1(Enclosures)	-	200	-
Cl-12.1(Torques)	-	750	-
Cl-12.1.2(Momentary overload test)	-	799.99	-
Cl-12.2(Temperature Rise)	-	1750	-
Cl-12.3(Short Time Rating)	-	500	-
Cl-12.4(Method of Testing)	-	100	-
Cl-12.5(Performance Values)	-	500	-
Cl-12.6(Limits of Vibration Severity)	-	450	-
Cl-12.7(Insulation Resistance)	-	1000	-
Cl-13.1(High Voltage Values)	-	1000	-
Cl-13.2(Moisture Proofness)	-	1000	-
Cl-13.3(Leakage Current)	-	1000	-
Cl-14(Winding Resistance Measurement)	-	1049.99	-
Cl-15(REDUCED VOLTAGE RUNNING UP TEST AT NO LOAD)	-	800	-
Cl-16(NOISE LEVEL)	-	500	-
Cl-17(OVER SPEED TEST)	-	500	-
Cl-18(TERMINAL MARKING)	-	500	-
Cl-12.1.1(Test for torues at rated voltage and frequency)	-	500	-
Cl-12.1.1(Pull up Torque at rated voltage and frequency)	-	500	-
Cl-12.1.1(Test for breakaway starting current at rated voltage and frequency)	-	500	-
Cl-12.1.2(Breakaway (starting) torque at rated voltage and frequency)	-	500	-
Cl-12.5.1(Test for full-load performance at rated voltage and frequency)	-	1000	-
Cl-21.5(Acceptance Tests)	-	1000	-

22 May, 2029

-
included w.e.f 16.03.2026

IS 19315 (2025)

Ball Valves for Water Works Purposes - Specification

8 mm and 10 mm

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
As per Clause 3(TERMS AND DEFINITION)	-	15000	-
As per Clause 3.1(Ambient Temperature)	-	15000	-
As per Clause 3.2(Cold Working Pressure (CWP))	-	15000	-
Cl 3.3(DN)	-	15000	-
Cl 3.4(End-to-End Dimension)	-	15000	-
Cl 3.5(Face-to-Face Dimension)	-	15000	-
Cl 3.6(Full Bore Valve)	-	15000	-
Cl 3.7(Operator)	-	15000	-
Cl 3.8(PN or Class)	-	15000	-
Cl 3.9(Reduce Bore Valve)	-	15000	-
Cl 3.10(Trim)	-	15000	-
Cl 4(DESIGN)	-	15000	-
Cl 4.1(Ball Valve Construction)	-	15000	-
Cl 4.2(Nominal Sizes)	-	15000	-
Cl 4.3(Rating)	-	15000	-
Cl 4.4(Valve Bore Dimensions)	-	15000	-
Cl 4.5(Face-to-Face and End-to-End Dimensions)	-	15000	-
Cl 4.6(Valve Ends)	-	15000	-
Cl 4.6.1(Flanged End)	-	15000	-
Cl 4.6.2(Socket Weld Ends for Stainless Steel Materials)	-	15000	-
Cl 4.6.3(Solder Ends for Copper Alloy Materials)	-	15000	-
Cl 4.6.4(Screwed Ends)	-	15000	-
Cl 4.6.4.1(Screwed end for copper alloy materials)	-	15000	-
Cl 4.6.4.2(Screwed end for stainless steel materials)	-	15000	-
Cl 4.6.5(Crimping Ends for Copper Alloy materials)	-	15000	-
Cl 4.7(Design)	-	15000	-
Cl 4.7.1(General)	-	15000	-
Cl 4.7.1.2("Body shell thickness for copper alloy materials ")	-	15000	-
Cl 4.7.1.3(Joint)	-	15000	-
Cl 4.7.1.5(End connections)	-	15000	-
Cl 4.7.1.6(Stems)	-	15000	-
Cl 4.7.1.8(Stem packing)	-	15000	-
Cl 4.7.1.9(Corrosion resistant coating)	-	15000	-
Cl 4.7.2(Body Shell Thickness for Steel Valves)	-	15000	-
Cl 4.7.3(Body Shell Thickness)	-	15000	-
Cl 4.7.4(Bolted Body Joint)	-	15000	-
Cl 4.7.5(Bolted Bonnet or Cover Joint)	-	15000	-
Cl 5(VALVE OPERATION)	-	15000	-
Cl 6(MATERIALS OF CONSTRUCTION)	-	15000	-
Cl 7(PERFORMANCE REQUIREMENTS)	-	15000	-
Cl 7.2(Pressure Tests for Steel Valves)	-	15000	-
Cl 7.2.1(Shell Test (HYD))	-	15000	-
Cl 7.2.2(Closure Test (HYD))	-	15000	-
Cl 7.2.3(Closure Test (Gas))	-	15000	-
Cl 7.2.4(Test Duration)	-	15000	-
Cl 7.3(Pressure Tests for Copper Alloy Valves)	-	15000	-
Cl 7.3.1(Shell Test)	-	15000	-
Cl 7.3.2(Closure Test)	-	15000	-
Cl 7.4(Test Fluid)	-	15000	-
Cl 7.5(Test Gauges)	-	15000	-
Cl 8(SAMPLING AND TESTING)	-	15000	-
Cl 8.2(Factory Production Control)	-	15000	-
Cl 9(PACKAGING)	-	15000	-
Cl 10(MARKING)	-	15000	-
Cl 10.1(Legibility)	-	15000	-
Cl 10.2(Body Marking)	-	15000	-
Cl 10.3(Identification Plate)	-	15000	-

22 May, 2029

-
Included w.e.f 05.01.2026

IS 9537 : Part 3 (1983)

Specification for conduits for electrical installations: Part 3 rigid plain conduits of insulating meterials

17500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1(Marking)	-	500	(20% discount to BIS)
6.2(Durability of Marking as per 6.4 of IS: 9537 (Part 1)-1980)	-	500	(20% discount to BIS)
6.3(Standard Mark on Conduit)	-	500	(20% discount to BIS)
7.1.1(Maximum and minimum outside diameter of socket)	-	2500	(20% discount to BIS)
7.1.1 Table-2(Length of Socket end)	-	2500	(20% discount to BIS)
7.1.2(Maximum and minimum outside diameter of conduit)	-	2500	(20% discount to BIS)
7.2(Minimum inside diameter of conduit)	-	2500	(20% discount to BIS)
7.3(Length of conduit)	-	2500	(20% discount to BIS)
7.4(Unifomity of The wall Thickness)	-	2500	(20% discount to BIS)
8.1(Construction as per clause 8 of IS: 9537 (Part 1)-1980)	-	1500	(20% discount to BIS)
9.2(Bending Test i) At Room Temp ii) At Low Temp (-5 ±2°C))	-	3000	(20% discount to BIS)
9.3(Compression Test as per caluse 9.3 of IS: 9537 (Part 1)-1980)	-	3000	(20% discount to BIS)
9.4(Impact Test as per clause 9.4 of IS: 9537 (Part 1)-1980)	-	3000	(20% discount to BIS)
9.5(Collapse Test as per clause 9.5 of IS: 9537 (Part 1)-1980)	-	3000	(20% discount to BIS)
10(Resistance to Heat -Ball presure test)	-	2000	(20% discount to BIS)
11(Resistance to burning as per clause 11 of IS: 9537 (Part 1)-1980)	-	2000	(20% discount to BIS)
12(Electrical Characteristics-Test for electric strength as per clause 12.1.1 of IS: 9537 (Part 1)-1980)	-	3000	(20% discount to BIS)
12(Electrical Characteristics-Insulation resistance test as per clause 12.1.2 of IS: 9537 (Part 1)-1980)	-	3000	(20% discount to BIS)
13(Tests for external influence as per clause 13 of IS: 9537 (Part 1)-1980)	-	3000	(20% discount to BIS)
13(Tests for external influence as per clause 13 of IS: 9537 (Part 1)-1980)	-	3000	(20% discount to BIS)
12(3 Characteristics-Insulation resistance test as per clause 12.1.2 of IS: 9537 (Part 1)-1980)	-	3000	(20% discount to BIS)
12(3 Characteristics-Test for electric strength as per clause 12.1.1 of IS: 9537 (Part 1)-1980)	-	3000	(20% discount to BIS)
11.0(Resistance to burning as per clause 11 of IS: 9537 (Part 1)-1980)	-	2000	(20% discount to BIS)
10.0(Resistance to Heat -Ball presure test)	-	2000	(20% discount to BIS)
9.5 Fig.5(Collapse Test as per clause 9.5 of IS: 9537 (Part 1)-1980)	-	3000	(20% discount to BIS)
9.4(Impact Test as per clause 9.4 of IS: 9537 (Part 1)-1980)	-	3000	(20% discount to BIS)
9.3(Compression Test (after removal of force) as per caluse 9.3.3 of IS: 9537 (Part 1)-1980)	-	3000	(20% discount to BIS)
9.3(Compression Test at Full force applied (On load))	-	3000	(20% discount to BIS)
9.2(Bending Test At Low Temp (-5 ±2°C))	-	3000	(20% discount to BIS)
9.2(Bending Test At Room Temp)	-	3000	(20% discount to BIS)
8.1(Construction as per clause 8 of IS: 9537 (Part 1)-1980)	-	1500	(20% discount to BIS)
7.4(Unifomity of The wall Thickness)	-	2500	(20% discount to BIS)
7.3(Length of conduit)	-	2500	(20% discount to BIS)
7.2 Fig.3(Minimum inside diameter of conduit)	-	2500	(20% discount to BIS)
7.1.2 Fig.2(Minimum outside diameter of conduit)	-	2500	(20% discount to BIS)
7.1.2 Fig.1(Maximum outside diameter of conduit)	-	2500	(20% discount to BIS)
7.1.1 Table-2(Length of Socket end)	-	2500	(20% discount to BIS)
7.1.1 Fig.8(Maximum inside diameter of socket)	-	2500	(20% discount to BIS)
7.1.1 Fig.7(Maximum outside diameter of socket)	-	2500	(20% discount to BIS)
6.3(Standard Mark on Conduit)	-	500	(20% discount to BIS)
6.2(Durability of Marking as per 6.4 of IS: 9537 (Part 1)-1980)	-	500	(20% discount to BIS)
6.1 - d(Marking)	-	500	(20% discount to BIS)
6.1 - c(Marking)	-	500	(20% discount to BIS)
6.1 - b(Marking)	-	500	(20% discount to BIS)
6.1 - a(Marking)	-	500	(20% discount to BIS)

22 May, 2029

-
Included w.e.f 10.12.2025

IS 5820 (2024)

PRECAST CONCRETE CABLE COVERS â SPECIFICATION (first revision)

19500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4.1(Cement)	-	19500	For complete testing
Cl-4.2(Aggregates)	-	19500	For complete testing
Cl-4.3(Pulverized Fuel Ash)	-	19500	For complete testing
Cl-4.4(Water)	-	19500	For complete testing
Cl-4.5(Steel Wire or Rod)	-	19500	For complete testing
Cl-5(Manufacture)	-	19500	For complete testing
Cl-6(Design)	-	19500	For complete testing
Cl-7.1(cable covers)	-	19500	For complete testing
Cl-7.2(Dimensions)	-	19500	For complete testing
Cl-7.3(Impact Strength)	-	19500	For complete testing
Cl-8.2(Number of Tests)	-	19500	For complete testing
Cl-11(Marking)	-	19500	For complete testing

22 May, 2029

-
Included w.e.f.17.09.2025

IS 2373 (1981)

Water Meters (Bulk Type)

50 mm and 80 mm

115000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.0(. NOMINAL SIZE)	-	115000	20% discount to BIS
4.1,(MATERIALS AND MANUFACTURE-General)	-	115000	20% discount to BIS
4.2.1,(Casing and Body- Casing)	-	115000	20% discount to BIS
4.2.2, Fig. 2(Casing and Body- Body)	-	115000	20% discount to BIS
4.3(Connections)	-	115000	20% discount to BIS
4.4(Screws, Studs, and Nuts)	-	115000	20% discount to BIS
4.5(Registration Box)	-	115000	20% discount to BIS
4.6(Cap)	-	115000	20% discount to BIS
4.7(Strainer)	-	115000	20% discount to BIS
4.8(Runners (Impellers))	-	115000	20% discount to BIS
4.9(Runner Chamber)	-	115000	20% discount to BIS
4.1(Gears)	-	115000	20% discount to BIS
4.11(Bearings)	-	115000	20% discount to BIS
4.12, Table 2(Counting Mechanism)	-	115000	20% discount to BIS
4.13(Dial)	-	115000	20% discount to BIS
4.14(Sealing)	-	115000	20% discount to BIS
4.15(Regulator)	-	115000	20% discount to BIS
4.16(Location of Serial Number)	-	115000	20% discount to BIS
5.1.1,(PERFORMANCE REQUIREMENTS-Temperature Suitability Test )	-	115000	20% discount to BIS
5.2 & 8.3(Hydrostatic Test)	-	115000	20% discount to BIS
5.3.1 Table 3(Capacity Ratings for Water Meters-Nominal Capacity or Short Period Rating 1.Vane-Wheel Type 2.Helical Type)	-	115000	20% discount to BIS
5.3.2 Table 4 & 8.3(Recommended Capacities for Intermediate Flows 1.Vane-Wheel Type 2.Helical Type)	-	115000	20% discount to BIS
5.4 Table 5 & 8.3(Minimum Starting Flow 1.Vane-Wheel Type 2.Helical Type)	-	115000	20% discount to BIS
5.5 Table 4 & 8.3 & 8.4.2(Metering Accuracy)	-	115000	20% discount to BIS
6.0(FROST PROTECTION DEVICES)	-	115000	20% discount to BIS
7.0(MARKING)	-	115000	20% discount to BIS
3.0(. NOMINAL SIZE)	-	115000	20% discount to BIS
4.1,(MATERIALS AND MANUFACTURE-General)	-	115000	20% discount to BIS
4.2.1,(Casing and Body- Casing)	-	115000	20% discount to BIS
4.2.2, Fig. 2(Casing and Body- Body)	-	115000	20% discount to BIS
4.3(Connections)	-	115000	20% discount to BIS
4.4(Screws, Studs, and Nuts)	-	115000	20% discount to BIS
4.5(Registration Box)	-	115000	20% discount to BIS
4.6(Cap)	-	115000	20% discount to BIS
4.7(Strainer)	-	115000	20% discount to BIS
4.8(Runners (Impellers))	-	115000	20% discount to BIS
4.9(Runner Chamber)	-	115000	20% discount to BIS
4.1(Gears)	-	115000	20% discount to BIS
4.11(Bearings)	-	115000	20% discount to BIS
4.12, Table 2(Counting Mechanism)	-	115000	20% discount to BIS
4.13(Dial)	-	115000	20% discount to BIS
4.14(Sealing)	-	115000	20% discount to BIS
4.15(Regulator)	-	115000	20% discount to BIS
4.16(Location of Serial Number)	-	115000	20% discount to BIS
5.1.1,(PERFORMANCE REQUIREMENTS-Temperature Suitability Test )	-	115000	20% discount to BIS
5.2 & 8.3(Hydrostatic Test)	-	115000	20% discount to BIS
5.3.1 Table 3(Capacity Ratings for Water Meters-Nominal Capacity or Short Period Rating 1.Vane-Wheel Type 2.Helical Type)	-	115000	20% discount to BIS
5.3.2 Table 4 & 8.3(Recommended Capacities for Intermediate Flows 1.Vane-Wheel Type 2.Helical Type)	-	115000	20% discount to BIS
5.4 Table 5 & 8.3(Minimum Starting Flow 1.Vane-Wheel Type 2.Helical Type)	-	115000	20% discount to BIS
5.5 Table 4 & 8.3 & 8.4.2(Metering Accuracy)	-	115000	20% discount to BIS
6.0(FROST PROTECTION DEVICES)	-	115000	20% discount to BIS
7.0(MARKING)	-	115000	20% discount to BIS
3.0(. NOMINAL SIZE)	-	115000	20% discount to BIS
4.1,(MATERIALS AND MANUFACTURE-General)	-	115000	20% discount to BIS
4.2.1,(Casing and Body- Casing)	-	115000	20% discount to BIS
4.2.2, Fig. 2(Casing and Body- Body)	-	115000	20% discount to BIS
4.3(Connections)	-	115000	20% discount to BIS
4.4(Screws, Studs, and Nuts)	-	115000	20% discount to BIS
4.5(Registration Box)	-	115000	20% discount to BIS
4.6(Cap)	-	115000	20% discount to BIS
4.7(Strainer)	-	115000	20% discount to BIS
4.8(Runners (Impellers))	-	115000	20% discount to BIS
4.9(Runner Chamber)	-	115000	20% discount to BIS
4.1(Gears)	-	115000	20% discount to BIS
4.11(Bearings)	-	115000	20% discount to BIS
4.12, Table 2(Counting Mechanism)	-	115000	20% discount to BIS
4.13(Dial)	-	115000	20% discount to BIS
4.14(Sealing)	-	115000	20% discount to BIS
4.15(Regulator)	-	115000	20% discount to BIS
4.16(Location of Serial Number)	-	115000	20% discount to BIS
5.1.1,(PERFORMANCE REQUIREMENTS-Temperature Suitability Test )	-	115000	20% discount to BIS
5.2 & 8.3(Hydrostatic Test)	-	115000	20% discount to BIS
5.3.1 Table 3(Capacity Ratings for Water Meters-Nominal Capacity or Short Period Rating 1.Vane-Wheel Type 2.Helical Type)	-	115000	20% discount to BIS
5.3.2 Table 4 & 8.3(Recommended Capacities for Intermediate Flows 1.Vane-Wheel Type 2.Helical Type)	-	115000	20% discount to BIS
5.4 Table 5 & 8.3(Minimum Starting Flow 1.Vane-Wheel Type 2.Helical Type)	-	115000	20% discount to BIS
5.5 Table 4 & 8.3 & 8.4.2(Metering Accuracy)	-	115000	20% discount to BIS
6.0(FROST PROTECTION DEVICES)	-	115000	20% discount to BIS
7.0(MARKING)	-	115000	20% discount to BIS

22 May, 2029

-
-

IS 14220 (2018)

Openwell submersible pumpsets - Specification (First Revision)

17700 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.1(Design Features)	-	17700	For complete testing
8.1.1(Design Features)	-	17700	For complete testing
8.1.4(Design Features)	-	17700	For complete testing
8.1.5(Design Features)	-	17700	For complete testing
8.1.5(Design Features)	-	17700	For complete testing
8.1.7(Design Features)	-	17700	For complete testing
9(Efficiency)	-	17700	For complete testing
10(Performance (Cl 17.1 of IS 5120))	-	17700	For complete testing
10(Suction and Delivery Ends (Cl 17.2 of IS 5120))	-	17700	For complete testing
10(Suction and Delivery Ends (Cl 17.2.1 of IS 5120))	-	17700	For complete testing
10(Fluid Passages (Cl 17.3 of IS 5120))	-	17700	For complete testing
10(Draining Plugrs (Cl 17.4 of IS 5120))	-	17700	For complete testing
10(Lantern Ring (Cl 17.5 of IS 5120))	-	17700	For complete testing
10(Casing (Cl 17.6 of IS 5120))	-	17700	For complete testing
10(Impeller (Cl 17.7 of IS 5120))	-	17700	For complete testing
10(Shaft (Cl 17.8 of IS 5120))	-	17700	For complete testing
10(Shaft Couplings (Cl 17.9 of IS 5120))	-	17700	For complete testing
10(Bearings (Cl 17.10 of IS 5120))	-	17700	For complete testing
10(Bearings (Cl 17.10.1 of IS 5120))	-	17700	For complete testing
10(Bearings (Cl 17.10.2 of IS 5120))	-	17700	For complete testing
10( Stuffing Boxes (Cl 17.11 of IS 5120))	-	17700	For complete testing
10(Base Plates (Cl 17.12 of IS 5120))	-	17700	For complete testing
10(Prime Mover (Cl 17.13 of IS 5120))	-	17700	For complete testing
10(Name Plate (Cl 17.14 of IS 5120))	-	17700	For complete testing
10(Name Plate (Cl 17.14 of IS 5120))	-	17700	For complete testing
10(Name Plate (Cl 17.14 of IS 5120))	-	17700	For complete testing
10(Name Plate (Cl 17.14.1 of IS 5120))	-	17700	For complete testing
10.2(Casing)	-	17700	For complete testing
10.3(Impeller)	-	17700	For complete testing
10.4.1(Shaft)	-	17700	For complete testing
10.4.2(Shaft)	-	17700	For complete testing
10.5.1(Balancing)	-	17700	For complete testing
10.5.2(Balancing)	-	17700	For complete testing
10.5.3(Balancing)	-	17700	For complete testing
10.5.4(Balancing)	-	17700	For complete testing
10.6.1( Provision for Earthing)	-	17700	For complete testing
10.6.2( Provision for Earthing)	-	17700	For complete testing
10.6.3( Provision for Earthing)	-	17700	For complete testing
10.6.4( Provision for Earthing)	-	17700	For complete testing
10.7.1(Terminal Marking and Direction of Rotation)	-	17700	For complete testing
10.7.2(Terminal Marking and Direction of Rotation)	-	17700	For complete testing
10.7.3(Terminal Marking and Direction of Rotation)	-	17700	For complete testing
15.2(Laboratory Tests Cl.8 of IS 11346-2002 Rate of flow and head Cl.8 of IS 11346-2002)	-	17700	For complete testing
15.2(Laboratory Tests Cl.8 of IS 11346-2002 Efficiency Cl.8.3 of IS 11346-2002)	-	17700	For complete testing
15.5(Hydrostatic Pressure Test)	-	17700	For complete testing
16.1.1( Guarantee of Performance)	-	17700	For complete testing
16.1.2( Guarantee of Performance)	-	17700	For complete testing
16.1.3( Guarantee of Performance)	-	17700	For complete testing
16.1.4( Guarantee of Performance)	-	17700	For complete testing
16.1.5( Guarantee of Performance)	-	17700	For complete testing
18.1(Marking)	-	17700	For complete testing
18.1(Marking)	-	17700	For complete testing
18.1(Marking)	-	17700	For complete testing
18.1(Marking)	-	17700	For complete testing
18.1(Marking)	-	17700	For complete testing
18.1(Marking)	-	17700	For complete testing
18.1(Marking)	-	17700	For complete testing
18.1(Marking)	-	17700	For complete testing
18.1(Marking)	-	17700	For complete testing
18.1(Marking)	-	17700	For complete testing
18.1(Marking)	-	17700	For complete testing
18.1(Marking)	-	17700	For complete testing
18.1(Marking)	-	17700	For complete testing
18.1(Marking)	-	17700	For complete testing
18.1(Marking)	-	17700	For complete testing
18.1(Marking)	-	17700	For complete testing
18.1(Marking)	-	17700	For complete testing
18.1(Marking)	-	17700	For complete testing
18.1(Marking)	-	17700	For complete testing
18.1.3(Marking)	-	17700	For complete testing
7(Constructional features)	-	17700	For complete testing
7.1(It is recognized that a number of materials of construction are available to meet the needs for pumps handling clear, cold water.)	-	17700	For complete testing
7.2(Gaskets, seals and packings used for clear, cold water pumps shall conform to the applicable requirements specified in 5.2 of IS 5120.)	-	17700	For complete testing
7.3(The motor shall be provided with a breathing attachment like bellows, diaphragm etc; to compensate the volumetric variation of water inside the motor due to change in the temperature.)	-	17700	For complete testing
7.4(The motor shall be protected from ingress of well water, sand and other foreign matter by means of cable glands, rubber seals etc.)	-	17700	For complete testing
7.5(All materials and components for the motor shall be suitable for application in respect of resistance and mechanical performance to protect it)	-	17700	For complete testing
7.6(The rotor of the wet type open well submersible motor and rotor in water filled designed motor shall be provided with suitable coating from corrosion under water. However if suitable anticorrosion additive is added in the water, no separate protection on rotors is necessary.)	-	17700	For complete testing
8(Design Features)	-	17700	For complete testing
8.1.2(The multi-stage pump shaft may be guided through bearings, the bearings may be provided in stage casing, suction housing and discharge casing, while in case of intermediate bearings, suitable positions may be selected in the overall span.)	-	17700	For complete testing
8.1.3(The pump may be equipped with replaceable bearing and wearing ring, wherever provided.)	-	17700	For complete testing
8.1.4(The strainer on the suction shall offer the best compromise amongst restraining large solids from entering the pump and containing the suction losses to the minimum.)	-	17700	For complete testing
8.1.5(The pump shall be capable to give discharge without overloading the prime mover within the permissible current at rated voltage and supply frequency at minimum +5 percent and minimum –15 percent of the guaranteed duty point head up to 30 m. Above 30 m, the pump shall be capable to give discharge without overloading the prime mover within the permissible current at rated voltage and supply frequency at minimum +10 percent and minimum –25 percent of the guaranteed duty point head.)	-	17700	For complete testing
12(Cable)	-	17700	For complete testing
12.1(Flat/Round cables as per IS694 shall be used)	-	17700	For complete testing
12.1.2(The size of the conductor shall be adequate and suitable for contineous use under water and in air. the length of the cable shall be minimum 2 m externallly unless otherwise specified by the customer)	-	17700	For complete testing
12.1.3(The size and of the cable should be suitably selected so that the voltage drop between control panel and the mptor terminal does not exeed three percent of the rated voltage)	-	17700	For complete testing
12.1.4(In case a joint is required to be made between the lead cable supplied with the motor and the user’s cable, a detailed procedure to make water tight joining shall be supplied by the motor manufacturer.)	-	17700	For complete testing
12.1.5(If four core cable is used, the fourth core is to be used for earthing.)	-	17700	For complete testing
14.10.1(Type test)	-	17700	For complete testing
14.10.1(a)(Insulation Resistance test)	-	17700	For complete testing
14.10.1(b)(High Voltage test)	-	17700	For complete testing
14.10.1(c)(Measurement of stator resistance)	-	17700	For complete testing
14.10.1(d)(No load test at rated voltage)	-	17700	For complete testing
14.10.1(e)(Reduced voltage running up test at no load)	-	17700	For complete testing
14.10.1(f)(Locked rotor)	-	17700	For complete testing
14.10.1(g)(Breakaway (starting) torque)	-	17700	For complete testing
14.10.1(h)(Leakage current test;)	-	17700	For complete testing
14.10.1(j)(Temperature rise test at rated voltage)	-	17700	For complete testing
14.10.1(k)(Temperature rise test at reduced voltage)	-	17700	For complete testing
16.1(Guarntee of Performance)	-	17700	For complete testing
16.1.1(The pumpset shall be guaranteed for their performance of the nominal volume rate of flow and the nominal head at the guaranteed duty point. The overall efficiency of the pumpset shall be guaranteed at the declared duty point only.)	-	17700	For complete testing
16.1.2(The guarantee shall be deemed to have been met with, if the measured values of head, volume rate of flow and overall efficiency are within the indicated in IS 11346 limits)	-	17700	For complete testing
16.1.3(Open well submersible motor shall not get overloaded in the specified operating head range at rated voltage and supply frequency.)	-	17700	For complete testing
16.1.4(The pump shall be tested for the operating head range as per 8.1.5.)	-	17700	For complete testing
16.1.5(The overloading of motor is that condition when maximum current drawn by the motor exceeds the limit of 1.07 times of the rated motor current)	-	17700	For complete testing
16.1.6(The tolerance shall apply to guaranteed duty point only.)	-	17700	For complete testing
16.1.7(Performance at rated voltage and supply frequency is actual performance of the set. This is better than performance at rated speed, since in the entire operating head range speed of motor is higher than rated speed, as motor is running in under loaded condition.)	-	17700	For complete testing
16.1.8(The manufacturer shall specify the minimum submergence of pump unit at duty point.)	-	17700	For complete testing
18.1(Marking)	-	17700	For complete testing
18.1(Marking)	-	17700	For complete testing
18.1(Marking)	-	17700	For complete testing
18.1(Marking)	-	17700	For complete testing
18.1(Marking)	-	17700	For complete testing
16.4.1 (Amendment-1)(Pump efficiency)	-	17700	For complete testing
9 (Amendment-1)(EFFICIENCY)	-	17700	For complete testing

22 May, 2029

-
Included w.e.f 02.01.2026

IS 2553 : Part 3 (2019)

Safety glass - Specification: Part 3 solar applications

74500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Raw Material)	-	74500	-
4.2 & 6(Dimensions)	-	74500	-
4.2 & 6(Squareness)	-	74500	-
4.2 & 6(Flatness)	-	74500	-
4.2 & 6(Fragmentation)	-	74500	-
4.2 & 6(Resistance to Shock (Ball Drop))	-	74500	-
4.2 & 6(Mechanical Strength)	-	74500	-
4.2 & 6(Hail Strength)	-	74500	-
5.2(Marking)	-	74500	-
As per Clause 6, Table 5(Solar Glas)	-	74500	-

22 May, 2029

-
Included w.e.f.26.05.2025 Exclusion Cl 4.2 & 6 (Hail Strength) (Optional Test)

IS 15500 : Part 1 to 8 (2021)

Deepwell Handpumps Components and Special Tools Specification

91800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.3.2 of IS 15500 : PART 2 (2021)(Other Components)	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
3.3.1 of IS 15500 : PART 2 (2021)(Head and Cylinder Assemblies)	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
3 of IS 15500 : PART 2 (2021)(TESTING)	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
2.2 of IS 15500 : PART 2 (2021)("2.2 The material and dimensions of the individual component shall meet the requirements given in the related part of this standard.")	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
2.1 of IS 15500 : PART 2 (2021)("The assembly detail of different types of handpumps covered in this part shall be as given in Fig. 2.1 to 2.5.")	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
2.1 of IS 15500 : PART 2 (2021)("The assembly detail of different types of handpumps covered in this part shall be as given in Fig. 2.1 to 2.5.")	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
2.1 of IS 15500 : PART 2 (2021)("The assembly detail of different types of handpumps covered in this part shall be as given in Fig. 2.1 to 2.5.")	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
2.1 of IS 15500 : PART 2 (2021)("The assembly detail of different types of handpumps covered in this part shall be as given in Fig. 2.1 to 2.5.")	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
2.1 of IS 15500 : PART 2 (2021)("The assembly detail of different types of handpumps covered in this part shall be as given in Fig. 2.1 to 2.5.")	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
2 of IS 15500 : PART 2 (2021)(CONSTRUCTION)	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
3.3.4 of IS 15500 : PART 3 (2021)(" Valve Assemblies ")	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
3.3.3 of IS 15500 : PART 3 (2021)("Cylinder Assembly ")	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
3.3.2 of IS 15500 : PART 3 (2021)("Handle Assembly ")	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
3.3.1 of IS 15500 : PART 3 (2021)(Head Assembly)	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
3 of IS 15500 : PART 3 (2021)(TESTING)	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
2.2 of IS 15500 : PART 3 (2021)("2.2 The material and dimensions of the individual component shall meet the requirements given in the related part of this standard.")	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
2.1 of IS 15500 : PART 3 (2021)("The assembly details of different handpump subassemblies covered in this part shall be as given in Fig. 3.1 to 3.14.")	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
2.1 of IS 15500 : PART 3 (2021)("The assembly details of different handpump subassemblies covered in this part shall be as given in Fig. 3.1 to 3.14.")	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
2.1 of IS 15500 : PART 3 (2021)("The assembly details of different handpump subassemblies covered in this part shall be as given in Fig. 3.1 to 3.14.")	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
2.1 of IS 15500 : PART 3 (2021)("The assembly details of different handpump subassemblies covered in this part shall be as given in Fig. 3.1 to 3.14.")	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
2.1 of IS 15500 : PART 3 (2021)("The assembly details of different handpump subassemblies covered in this part shall be as given in Fig. 3.1 to 3.14.")	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
2.1 of IS 15500 : PART 3 (2021)("The assembly details of different handpump subassemblies covered in this part shall be as given in Fig. 3.1 to 3.14.")	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
2.1 of IS 15500 : PART 3 (2021)("The assembly details of different handpump subassemblies covered in this part shall be as given in Fig. 3.1 to 3.14.")	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
2.1 of IS 15500 : PART 3 (2021)("The assembly details of different handpump subassemblies covered in this part shall be as given in Fig. 3.1 to 3.14.")	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
2.1 of IS 15500 : PART 3 (2021)("The assembly details of different handpump subassemblies covered in this part shall be as given in Fig. 3.1 to 3.14.")	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
2.1 of IS 15500 : PART 3 (2021)("The assembly details of different handpump subassemblies covered in this part shall be as given in Fig. 3.1 to 3.14.")	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
2.1 of IS 15500 : PART 3 (2021)("The assembly details of different handpump subassemblies covered in this part shall be as given in Fig. 3.1 to 3.14.")	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
2.1 of IS 15500 : PART 3 (2021)("The assembly details of different handpump subassemblies covered in this part shall be as given in Fig. 3.1 to 3.14.")	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
2.1 of IS 15500 : PART 3 (2021)("The assembly details of different handpump subassemblies covered in this part shall be as given in Fig. 3.1 to 3.14.")	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
2.1 of IS 15500 : PART 3 (2021)("The assembly details of different handpump subassemblies covered in this part shall be as given in Fig. 3.1 to 3.14.")	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
2 of IS 15500 : PART 3 (2021)(CONSTRUCTION)	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
Fig. 6.13 of IS 15500 : PART 6 (2021)(Check Valve Seat-VLOM 65)	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
Fig. 6.13 of IS 15500 : PART 6 (2021)(Check Valve Seat-VLOM 65)	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete T
Fig. 6.12 of IS 15500 : PART 6 (2021)("Check Valve Seat-Standard (for SDWP & EDWP)")	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
3.5 of IS 15500 : PART 4 (2021)("The connecting rods/plunger rods shall be examined for straightness and formation of threads.")	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
Fig. 6.11 of IS 15500 : PART 6 (2021)("Rubber Seat Retainer (for SDWP, EDWP & FLP)")	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
Fig. 6.11 of IS 15500 : PART 6 (2021)("Rubber Seat Retainer (for SDWP, EDWP & FLP)")	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
Fig. 6.9 of IS 15500 : PART 6 (2021)(" Check Valve-Standard (for SDWP, EDWP and FLP)")	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
3.4 of IS 15500 : PART 4 (2021)("The flanges shall be reasonably flat to provide proper matching of the holes to ensure unrestricted insertion of the bolts when assembled with counterpart.")	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
3.4 of IS 15500 : PART 4 (2021)("The flanges shall be reasonably flat to provide proper matching of the holes to ensure unrestricted insertion of the bolts when assembled with counterpart.")	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
Fig. 6.7 of IS 15500 : PART 6 (2021)(Follower-EDW)	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
3 of IS 15500 : PART 4 (2021)(TESTING)	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
Fig. 6.7 of IS 15500 : PART 6 (2021)(Follower-EDW)	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
Fig. 6.6 of IS 15500 : PART 6 (2021)(Follower (SDWP and FLP))	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
2.4 of IS 15500 : PART 4 (2021)("Stainless Steel top connecting rod shall be as given in Fig. 4.21B")	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
Fig. 6.6 of IS 15500 : PART 6 (2021)(Follower (SDWP and FLP))	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
2.3 of IS 15500 : PART 4 (2021)("The steel components shall be given anti-corrosive treatment as mentioned in 6 of Part 1. in Fig. 4.21B")	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
2.2 of IS 15500 : PART 4 (2021)("2.2 The material and dimensions of the individual component shall meet the requirements given in the related part of this standard.")	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
2.1 of IS 15500 : PART 4 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 4.1 to 4.35.")	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
Fig. 6.5 of IS 15500 : PART 6 (2021)("Bucket Spacer-Lower (for EDWP)")	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
2.1 of IS 15500 : PART 4 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 4.1 to 4.35.")	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
2.1 of IS 15500 : PART 4 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 4.1 to 4.35.")	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
2.1 of IS 15500 : PART 4 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 4.1 to 4.35.")	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
2.1 of IS 15500 : PART 4 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 4.1 to 4.35.")	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
2.1 of IS 15500 : PART 4 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 4.1 to 4.35.")	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
2.1 of IS 15500 : PART 4 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 4.1 to 4.35.")	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
2.1 of IS 15500 : PART 4 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 4.1 to 4.35.")	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
2.1 of IS 15500 : PART 4 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 4.1 to 4.35.")	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
2.1 of IS 15500 : PART 4 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 4.1 to 4.35.")	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
Fig. 6.5 of IS 15500 : PART 6 (2021)("Bucket Spacer-Lower (for EDWP)")	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
Fig. 6.5 of IS 15500 : PART 6 (2021)("Bucket Spacer-Lower (for EDWP)")	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
Fig. 6.5 of IS 15500 : PART 6 (2021)("Bucket Spacer-Lower (for EDWP)")	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
2.1 of IS 15500 : PART 4 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 4.1 to 4.35.")	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
Fig. 6.5 of IS 15500 : PART 6 (2021)("Bucket Spacer-Lower (for EDWP)")	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
Fig. 6.4 of IS 15500 : PART 6 (2021)(" Bucket Spacer-Standard (for SDWP, EDWP, VLOM 65 and FLP)")	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
2.1 of IS 15500 : PART 4 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 4.1 to 4.35.")	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
Fig. 6.4 of IS 15500 : PART 6 (2021)(" Bucket Spacer-Standard (for SDWP, EDWP, VLOM 65 and FLP)")	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
2.1 of IS 15500 : PART 4 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 4.1 to 4.35.")	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
Fig. 6.4 of IS 15500 : PART 6 (2021)(" Bucket Spacer-Standard (for SDWP, EDWP, VLOM 65 and FLP)")	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
2.1 of IS 15500 : PART 4 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 4.1 to 4.35.")	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
Fig. 6.4 of IS 15500 : PART 6 (2021)(" Bucket Spacer-Standard (for SDWP, EDWP, VLOM 65 and FLP)")	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
Fig. 6.4 of IS 15500 : PART 6 (2021)(" Bucket Spacer-Standard (for SDWP, EDWP, VLOM 65 and FLP)")	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
2.1 of IS 15500 : PART 4 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 4.1 to 4.35.")	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
Fig. 6.4 of IS 15500 : PART 6 (2021)(" Bucket Spacer-Standard (for SDWP, EDWP, VLOM 65 and FLP)")	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
2.1 of IS 15500 : PART 4 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 4.1 to 4.35.")	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
Fig. 6.4 of IS 15500 : PART 6 (2021)(" Bucket Spacer-Standard (for SDWP, EDWP, VLOM 65 and FLP)")	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
2.1 of IS 15500 : PART 4 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 4.1 to 4.35.")	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
Fig. 6.3 of IS 15500 : PART 6 (2021)(Upper Valve (for SDWP, EDWP, VLOM 65 and FLP))	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
2.1 of IS 15500 : PART 4 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 4.1 to 4.35.")	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
Fig. 6.3 of IS 15500 : PART 6 (2021)(Upper Valve (for SDWP, EDWP, VLOM 65 and FLP))	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
2.1 of IS 15500 : PART 4 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 4.1 to 4.35.")	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
Fig. 6.3 of IS 15500 : PART 6 (2021)(Upper Valve (for SDWP, EDWP, VLOM 65 and FLP))	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
2.1 of IS 15500 : PART 4 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 4.1 to 4.35.")	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
2.1 of IS 15500 : PART 4 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 4.1 to 4.35.")	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
Fig. 6.2 of IS 15500 : PART 6 (2021)("Plunger Yoka Body (for SDWP, EDWP, VLOM 65 and FLP)")	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
Fig. 6.2 of IS 15500 : PART 6 (2021)("Plunger Yoka Body (for SDWP, EDWP, VLOM 65 and FLP)")	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
Fig. 6.2 of IS 15500 : PART 6 (2021)("Plunger Yoka Body (for SDWP, EDWP, VLOM 65 and FLP)")	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
Fig. 6.1 of IS 15500 : PART 6 (2021)(Brass Liner)	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
3.1 of IS 15500 : PART 7 (2021)("3.3 The critical dimensions and hardness of all the components selected as per 3.2 shall be checked for conformance with the relevant figures given in this part part shall be treated as a separate lot.")	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
2.1 of IS 15500 : PART 4 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 4.1 to 4.35.")	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
3 of IS 15500 : PART 7 (2021)(TESTING)	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
2.2 of IS 15500 : PART 7 (2021)(" The material and dimensions shall meet the related prerequisites given in 4 and 5 of Part 1.")	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
2.1 of IS 15500 : PART 4 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 4.1 to 4.35.")	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
2.1 of IS 15500 : PART 7 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 7.1 to 7.18.")	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
2.1 of IS 15500 : PART 4 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 4.1 to 4.35.")	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
2.1 of IS 15500 : PART 7 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 7.1 to 7.18.")	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
2.1 of IS 15500 : PART 4 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 4.1 to 4.35.")	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
2.1 of IS 15500 : PART 7 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 7.1 to 7.18.")	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
2.1 of IS 15500 : PART 4 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 4.1 to 4.35.")	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
2.1 of IS 15500 : PART 7 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 7.1 to 7.18.")	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
2.1 of IS 15500 : PART 4 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 4.1 to 4.35.")	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
2.1 of IS 15500 : PART 7 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 7.1 to 7.18.")	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
2.1 of IS 15500 : PART 4 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 4.1 to 4.35.")	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
2.1 of IS 15500 : PART 7 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 7.1 to 7.18.")	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
2.1 of IS 15500 : PART 7 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 7.1 to 7.18.")	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
2.1 of IS 15500 : PART 4 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 4.1 to 4.35.")	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
2.1 of IS 15500 : PART 7 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 7.1 to 7.18.")	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
2.1 of IS 15500 : PART 7 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 7.1 to 7.18.")	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
2.1 of IS 15500 : PART 4 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 4.1 to 4.35.")	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
2.1 of IS 15500 : PART 7 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 7.1 to 7.18.")	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
2.1 of IS 15500 : PART 4 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 4.1 to 4.35.")	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
2.1 of IS 15500 : PART 4 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 4.1 to 4.35.")	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
2.1 of IS 15500 : PART 7 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 7.1 to 7.18.")	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
2.1 of IS 15500 : PART 7 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 7.1 to 7.18.")	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
2.1 of IS 15500 : PART 4 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 4.1 to 4.35.")	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
2.1 of IS 15500 : PART 7 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 7.1 to 7.18.")	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
2.1 of IS 15500 : PART 7 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 7.1 to 7.18.")	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
2.1 of IS 15500 : PART 4 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 4.1 to 4.35.")	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
2.1 of IS 15500 : PART 7 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 7.1 to 7.18.")	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
2.1 of IS 15500 : PART 4 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 4.1 to 4.35.")	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
2.1 of IS 15500 : PART 7 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 7.1 to 7.18.")	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
2.1 of IS 15500 : PART 7 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 7.1 to 7.18.")	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
2.1 of IS 15500 : PART 4 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 4.1 to 4.35.")	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
2.1 of IS 15500 : PART 7 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 7.1 to 7.18.")	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
2.1 of IS 15500 : PART 7 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 7.1 to 7.18.")	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
2.1 of IS 15500 : PART 4 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 4.1 to 4.35.")	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
2 of IS 15500 : PART 7 (2021)(CONSTRUCTION)	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
2 of IS 15500 : PART 4 (2021)(CONSTRUCTION)	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
Fig. 6.2 of IS 15500 : PART 5 (2021)("Plunger Yoka Body (for SDWP, EDWP, VLOM 65 and FLP)")	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
Fig. 6.1 of IS 15500 : PART 5 (2021)(Brass Liner)	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
Fig. 5.6 B of IS 15500 : PART 5 (2021)(Cylinder Caps-VLOM 50)	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
Fig. 5.6 B of IS 15500 : PART 5 (2021)(Cylinder Caps-VLOM 50)	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
Fig. 5.6 B of IS 15500 : PART 5 (2021)(Cylinder Caps-VLOM 50)	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
Fig. 5.6 B of IS 15500 : PART 5 (2021)(Cylinder Caps-VLOM 50)	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
Fig. 5.6 B of IS 15500 : PART 5 (2021)(Cylinder Caps-VLOM 50)	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
5.3.7.2 of IS 15500 : PART 8 (2021)(" A similar test shall be done on the connecting rod vice by using 12 mm diameter drawn bar and a load of 200 kgf. There shall be no slippage of the bar.")	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
Fig. 5.6 A of IS 15500 : PART 5 (2021)(Cylinder Caps-VLOM 50)	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
5.3.7.1.1 of IS 15500 : PART 8 (2021)(Mandrel size)	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
5.3.7 of IS 15500 : PART 8 (2021)(Clamping Test)	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
5.3.6.1 of IS 15500 : PART 8 (2021)(" In case of assembly, all the components shall be dismantled and tested likewise.")	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
5.3.6 of IS 15500 : PART 8 (2021)(" Two samples out of the batch selected shall be checked for dimensional and other requirements given in respective figures.")	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
5.3.5 of IS 15500 : PART 8 (2021)(" Incase of the Connecting Rod Vice ")	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
5.3.4 of IS 15500 : PART 8 (2021)(In case of the Self-locking Clamp)	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
5.3.3 of IS 15500 : PART 8 (2021)(" The movement of the screws of the heavy duty clamp and the connecting rod vice shall be easy without undue slackness or resistance throughout the opening. Proper alignment of their jaws shall be ensured.")	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
5.3.2 of IS 15500 : PART 8 (2021)(" The base plates of the clamps and/or vice shall be reasonably flat to provide proper matching of holes to ensure unrestricted insertion of bolts when fitted on respective flanges of the handpump.")	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
5.3.1 of IS 15500 : PART 8 (2021)(" All the tools shall be examined for finish, workmanship and visual defects.")	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
5 of IS 15500 : PART 8 (2021)(TESTING)	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
4.2 of IS 15500 : PART 8 (2021)(Painting)	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
4.1 of IS 15500 : PART 8 (2021)(Electro-galvanizing)	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
4 of IS 15500 : PART 8 (2021)(ANTI-CORROSIVE TREATMENT)	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
3.3.1 of IS 15500 : PART 8 (2021)(" The hinged lid shall be provided with suitable arrangement for putting a lock.")	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
3.3 of IS 15500 : PART 8 (2021)(" The tool box shall be made of 1 mm nominal thick CRCA steel sheet (see IS 513), with the overall dimensions given below: Length 440 mm Width 320 mm Height 110 mm")	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
3.2 of IS 15500 : PART 8 (2021)("2.2 The material and dimensions of the individual component shall meet the requirements given in the related part of this standard.")	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
3.1 of IS 15500 : PART 8 (2021)(" The constructional details of different tools covered in this part shall be as given in Fig. 8.1.1 to 8.1.10, Fig. 8.2.1 to 8.2.8 and Fig. 8.3.1 to 8.3.7.")	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
3.1 of IS 15500 : PART 8 (2021)(" The constructional details of different tools covered in this part shall be as given in Fig. 8.1.1 to 8.1.10, Fig. 8.2.1 to 8.2.8 and Fig. 8.3.1 to 8.3.7.")	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
3.1 of IS 15500 : PART 8 (2021)(" The constructional details of different tools covered in this part shall be as given in Fig. 8.1.1 to 8.1.10, Fig. 8.2.1 to 8.2.8 and Fig. 8.3.1 to 8.3.7.")	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
3.1 of IS 15500 : PART 8 (2021)(" The constructional details of different tools covered in this part shall be as given in Fig. 8.1.1 to 8.1.10, Fig. 8.2.1 to 8.2.8 and Fig. 8.3.1 to 8.3.7.")	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
Fig. 5.6 A of IS 15500 : PART 5 (2021)(Cylinder Caps-VLOM 50)	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
3.1 of IS 15500 : PART 8 (2021)(" The constructional details of different tools covered in this part shall be as given in Fig. 8.1.1 to 8.1.10, Fig. 8.2.1 to 8.2.8 and Fig. 8.3.1 to 8.3.7.")	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
Fig. 5.6 A of IS 15500 : PART 5 (2021)(Cylinder Caps-VLOM 50)	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
3.1 of IS 15500 : PART 8 (2021)(" The constructional details of different tools covered in this part shall be as given in Fig. 8.1.1 to 8.1.10, Fig. 8.2.1 to 8.2.8 and Fig. 8.3.1 to 8.3.7.")	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
Fig. 5.6 A of IS 15500 : PART 5 (2021)(Cylinder Caps-VLOM 50)	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
3.1 of IS 15500 : PART 8 (2021)(" The constructional details of different tools covered in this part shall be as given in Fig. 8.1.1 to 8.1.10, Fig. 8.2.1 to 8.2.8 and Fig. 8.3.1 to 8.3.7.")	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
Fig. 5.5 B of IS 15500 : PART 5 (2021)("Cylinder Caps-VLOM 65 (for SDWP and EDWP)")	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
3.1 of IS 15500 : PART 8 (2021)(" The constructional details of different tools covered in this part shall be as given in Fig. 8.1.1 to 8.1.10, Fig. 8.2.1 to 8.2.8 and Fig. 8.3.1 to 8.3.7.")	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
3.1 of IS 15500 : PART 8 (2021)(" The constructional details of different tools covered in this part shall be as given in Fig. 8.1.1 to 8.1.10, Fig. 8.2.1 to 8.2.8 and Fig. 8.3.1 to 8.3.7.")	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
Fig. 5.5 B of IS 15500 : PART 5 (2021)("Cylinder Caps-VLOM 65 (for SDWP and EDWP)")	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
3.1 of IS 15500 : PART 8 (2021)(" The constructional details of different tools covered in this part shall be as given in Fig. 8.1.1 to 8.1.10, Fig. 8.2.1 to 8.2.8 and Fig. 8.3.1 to 8.3.7.")	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
Fig. 5.5 B of IS 15500 : PART 5 (2021)("Cylinder Caps-VLOM 65 (for SDWP and EDWP)")	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
3.1 of IS 15500 : PART 8 (2021)(" The constructional details of different tools covered in this part shall be as given in Fig. 8.1.1 to 8.1.10, Fig. 8.2.1 to 8.2.8 and Fig. 8.3.1 to 8.3.7.")	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
3.1 of IS 15500 : PART 8 (2021)(" The constructional details of different tools covered in this part shall be as given in Fig. 8.1.1 to 8.1.10, Fig. 8.2.1 to 8.2.8 and Fig. 8.3.1 to 8.3.7.")	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
Fig. 5.5 A of IS 15500 : PART 5 (2021)("Cylinder Caps-VLOM 65 (for SDWP and EDWP)")	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
3.1 of IS 15500 : PART 8 (2021)(" The constructional details of different tools covered in this part shall be as given in Fig. 8.1.1 to 8.1.10, Fig. 8.2.1 to 8.2.8 and Fig. 8.3.1 to 8.3.7.")	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
3.1 of IS 15500 : PART 8 (2021)(" The constructional details of different tools covered in this part shall be as given in Fig. 8.1.1 to 8.1.10, Fig. 8.2.1 to 8.2.8 and Fig. 8.3.1 to 8.3.7.")	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
Fig. 5.5 A of IS 15500 : PART 5 (2021)("Cylinder Caps-VLOM 65 (for SDWP and EDWP)")	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
3.1 of IS 15500 : PART 8 (2021)(" The constructional details of different tools covered in this part shall be as given in Fig. 8.1.1 to 8.1.10, Fig. 8.2.1 to 8.2.8 and Fig. 8.3.1 to 8.3.7.")	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
3.1 of IS 15500 : PART 8 (2021)(" The constructional details of different tools covered in this part shall be as given in Fig. 8.1.1 to 8.1.10, Fig. 8.2.1 to 8.2.8 and Fig. 8.3.1 to 8.3.7.")	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
Fig. 5.4 of IS 15500 : PART 5 (2021)("Reducer Cap (for SDWP, EDWP and FLP)")	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
3.1 of IS 15500 : PART 8 (2021)(" The constructional details of different tools covered in this part shall be as given in Fig. 8.1.1 to 8.1.10, Fig. 8.2.1 to 8.2.8 and Fig. 8.3.1 to 8.3.7.")	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
Fig. 5.4 of IS 15500 : PART 5 (2021)("Reducer Cap (for SDWP, EDWP and FLP)")	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
3.1 of IS 15500 : PART 8 (2021)(" The constructional details of different tools covered in this part shall be as given in Fig. 8.1.1 to 8.1.10, Fig. 8.2.1 to 8.2.8 and Fig. 8.3.1 to 8.3.7.")	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
3.1 of IS 15500 : PART 8 (2021)(" The constructional details of different tools covered in this part shall be as given in Fig. 8.1.1 to 8.1.10, Fig. 8.2.1 to 8.2.8 and Fig. 8.3.1 to 8.3.7.")	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
Fig. 5.4 of IS 15500 : PART 5 (2021)("Reducer Cap (for SDWP, EDWP and FLP)")	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
3.1 of IS 15500 : PART 8 (2021)(" The constructional details of different tools covered in this part shall be as given in Fig. 8.1.1 to 8.1.10, Fig. 8.2.1 to 8.2.8 and Fig. 8.3.1 to 8.3.7.")	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
3.1 of IS 15500 : PART 8 (2021)(" The constructional details of different tools covered in this part shall be as given in Fig. 8.1.1 to 8.1.10, Fig. 8.2.1 to 8.2.8 and Fig. 8.3.1 to 8.3.7.")	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
3.1 of IS 15500 : PART 8 (2021)(" The constructional details of different tools covered in this part shall be as given in Fig. 8.1.1 to 8.1.10, Fig. 8.2.1 to 8.2.8 and Fig. 8.3.1 to 8.3.7.")	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
Fig. 5.4 of IS 15500 : PART 5 (2021)("Reducer Cap (for SDWP, EDWP and FLP)")	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
3.1 of IS 15500 : PART 8 (2021)(" The constructional details of different tools covered in this part shall be as given in Fig. 8.1.1 to 8.1.10, Fig. 8.2.1 to 8.2.8 and Fig. 8.3.1 to 8.3.7.")	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
3.1 of IS 15500 : PART 8 (2021)(" The constructional details of different tools covered in this part shall be as given in Fig. 8.1.1 to 8.1.10, Fig. 8.2.1 to 8.2.8 and Fig. 8.3.1 to 8.3.7.")	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
3.1 of IS 15500 : PART 8 (2021)(" The constructional details of different tools covered in this part shall be as given in Fig. 8.1.1 to 8.1.10, Fig. 8.2.1 to 8.2.8 and Fig. 8.3.1 to 8.3.7.")	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
3.1 of IS 15500 : PART 8 (2021)(" The constructional details of different tools covered in this part shall be as given in Fig. 8.1.1 to 8.1.10, Fig. 8.2.1 to 8.2.8 and Fig. 8.3.1 to 8.3.7.")	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
Fig. 5.3 of IS 15500 : PART 5 (2021)(Cylinder Body-VLOM 50)	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
3.1 of IS 15500 : PART 8 (2021)(" The constructional details of different tools covered in this part shall be as given in Fig. 8.1.1 to 8.1.10, Fig. 8.2.1 to 8.2.8 and Fig. 8.3.1 to 8.3.7.")	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
Fig. 5.3 of IS 15500 : PART 5 (2021)(Cylinder Body-VLOM 50)	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
3.1 of IS 15500 : PART 8 (2021)(" The constructional details of different tools covered in this part shall be as given in Fig. 8.1.1 to 8.1.10, Fig. 8.2.1 to 8.2.8 and Fig. 8.3.1 to 8.3.7.")	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
3.1 of IS 15500 : PART 8 (2021)(" The constructional details of different tools covered in this part shall be as given in Fig. 8.1.1 to 8.1.10, Fig. 8.2.1 to 8.2.8 and Fig. 8.3.1 to 8.3.7.")	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
3.1 of IS 15500 : PART 8 (2021)(" The constructional details of different tools covered in this part shall be as given in Fig. 8.1.1 to 8.1.10, Fig. 8.2.1 to 8.2.8 and Fig. 8.3.1 to 8.3.7.")	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
Fig. 5.2 of IS 15500 : PART 5 (2021)(Cylinder Body-Long (for EDWP and VLOM 65))	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
3.1 of IS 15500 : PART 8 (2021)(" The constructional details of different tools covered in this part shall be as given in Fig. 8.1.1 to 8.1.10, Fig. 8.2.1 to 8.2.8 and Fig. 8.3.1 to 8.3.7.")	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
3.1 of IS 15500 : PART 8 (2021)(" The constructional details of different tools covered in this part shall be as given in Fig. 8.1.1 to 8.1.10, Fig. 8.2.1 to 8.2.8 and Fig. 8.3.1 to 8.3.7.")	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
3.1 of IS 15500 : PART 8 (2021)(" The constructional details of different tools covered in this part shall be as given in Fig. 8.1.1 to 8.1.10, Fig. 8.2.1 to 8.2.8 and Fig. 8.3.1 to 8.3.7.")	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
Fig. 5.2 of IS 15500 : PART 5 (2021)(Cylinder Body-Long (for EDWP and VLOM 65))	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
3.1 of IS 15500 : PART 8 (2021)(" The constructional details of different tools covered in this part shall be as given in Fig. 8.1.1 to 8.1.10, Fig. 8.2.1 to 8.2.8 and Fig. 8.3.1 to 8.3.7.")	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
3.1 of IS 15500 : PART 8 (2021)(" The constructional details of different tools covered in this part shall be as given in Fig. 8.1.1 to 8.1.10, Fig. 8.2.1 to 8.2.8 and Fig. 8.3.1 to 8.3.7.")	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
Fig. 5.2 of IS 15500 : PART 5 (2021)(Cylinder Body-Long (for EDWP and VLOM 65))	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
3.1 of IS 15500 : PART 8 (2021)(" The constructional details of different tools covered in this part shall be as given in Fig. 8.1.1 to 8.1.10, Fig. 8.2.1 to 8.2.8 and Fig. 8.3.1 to 8.3.7.")	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
3 of IS 15500 : PART 8 (2021)(CONSTRUCTION)	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
Fig. 5.1 of IS 15500 : PART 5 (2021)(Cylinder Body-Standard (for SDWP and FLP))	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
Fig. 5.1 of IS 15500 : PART 5 (2021)(Cylinder Body-Standard (for SDWP and FLP))	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-
Fig. 5.1 of IS 15500 : PART 5 (2021)(DEEPWELL HANDPUMPS, COMPONENTS AND SPECIAL TOOLS — SPECIFICATION PART 5 CAST IRON COMPONENTS)	-	91800	Complete Testing charges for Part- 1 to 8 (including raw materials) - Rs. 91800/- Complete Testing charges for Part- 1 to 8 (excluding raw materials) - Rs. 76800/-

22 May, 2029

-
Included w.e.f.22.05.2025

IS 779 (1994)

Water meters (Domestic Type) - Specification (Sixth Revision)

7500 View breakup
-

Clause No.	Exclusion	Remark
13(Marking)	-	For Complete Mechanical Test: 7500 & For Life Cycle Test:-20000 upto 25 mm, Above 25 mm:35000
4(Nominal Size)	-	For Complete Mechanical Test: 7500 & For Life Cycle Test:-20000 upto 25 mm, Above 25 mm:35000
5(Classes of Water meter)	-	For Complete Mechanical Test: 7500 & For Life Cycle Test:-20000 upto 25 mm, Above 25 mm:35000
7(Construction)	-	-
7.2(i) Body)	-	-
7.3(Registration Box)	-	-
7.4(Cap)	-	-
7.5(Connections )	-	-
7.6(Strainers)	-	-
7.7(Impeller and pistons)	-	-
7.8(Impeller, Chamber and Measuring Chamber )	-	-
7.9(Gears & Pinions )	-	-
7.1(Bearings)	-	-
7.11(Counter)	-	-
7.12(Dial)	-	-
7.13(Regulator)	-	-
7.14(Sealing)	-	-
7.15(Frost protection device)	-	-
8.1 & 8.2(Indicating device)	-	-
8.3(Value of verification Scale division )	-	-
8.4(Acceleration Device)	-	-
9.1, table 2(i)Threads )	-	-
9.1, table 3(ii)Thread Length ‘a’ )	-	-
9.1, table 4( ‘b’ )	-	-
9.1, table 5(iii) Overall Length (with nipple))	-	-
9.1, table 6(iv)Overall Width )	-	-
9.1, table 7(v)Overall Height H1)	-	-
9.1, table 8( H2 )	-	-
10.1(Pressure tightness)	-	-
10.2(Loss of pressure)	-	-
11.1(Metering Accuracy)	-	-
11.2(Min. Starting flow)	-	-
10.3(Temp. suitability )	-	-
10.1(Pressure tightness)	-	-
10.2(Loss of pressure)	-	-
11.1(Metering Accuracy)	-	-
12.4.3(Construction)	-	-
12.4.4(Life test )	-	-
10.1(Pressure tightness)	-	-
10.2(Loss of pressure)	-	-
11.1(Metering Accuracy)	-	-
11.2(Min. Starting flow)	-	-
10.3(Temp. suitability )	-	-
10.1(Pressure tightness)	-	-
10.2(Loss of pressure)	-	-
11.1(Metering Accuracy)	-	-
12.4.2(Construction)	-	-
13(Marking)	-	-
4(Nominal Size)	-	-
5(Classes of Water meter)	-	-
7(Construction)	-	-
7.2(i) Body)	-	-
7.3(Registration Box)	-	-
7.4(Cap)	-	-
7.5(Connections )	-	-
7.6(Strainers)	-	-
7.7(Impeller and pistons)	-	-
7.8(Impeller, Chamber and Measuring Chamber )	-	-
7.9(Gears & Pinions )	-	-
7.1(Bearings)	-	-
7.11(Counter)	-	-
7.12(Dial)	-	-
7.13(Regulator)	-	-
7.14(Sealing)	-	-
7.15(Frost protection device)	-	-
8.1 & 8.2(Indicating device)	-	-
8.3(Value of verification Scale division )	-	-
8.4(Acceleration Device)	-	-
9.1, table 2(i)Threads )	-	-
9.1, table 3(ii)Thread Length ‘a’ )	-	-
9.1, table 4( ‘b’ )	-	-
9.1, table 5(iii) Overall Length (with nipple))	-	-
9.1, table 6(iv)Overall Width )	-	-
9.1, table 7(v)Overall Height H1)	-	-
9.1, table 8( H2 )	-	-
10.1(Pressure tightness)	-	-
10.2(Loss of pressure)	-	-
11.1(Metering Accuracy)	-	-
11.2(Min. Starting flow)	-	-
10.3(Temp. suitability )	-	-
10.1(Pressure tightness)	-	-
10.2(Loss of pressure)	-	-
11.1(Metering Accuracy)	-	-
12.4.3(Construction)	-	-
12.4.4(Life test )	-	-
10.1(Pressure tightness)	-	-
10.2(Loss of pressure)	-	-
11.1(Metering Accuracy)	-	-
11.2(Min. Starting flow)	-	-
10.3(Temp. suitability )	-	-
10.1(Pressure tightness)	-	-
10.2(Loss of pressure)	-	-
11.1(Metering Accuracy)	-	-
12.4.2(Construction)	-	-
13(Marking)	-	-
4(Nominal Size)	-	-
5(Classes of Water meter)	-	-
7(Construction)	-	-
7.2(i) Body)	-	-
7.3(Registration Box)	-	-
7.4(Cap)	-	-
7.5(Connections )	-	-
7.6(Strainers)	-	-
7.7(Impeller and pistons)	-	For Complete Mechanical Test: 7500 & For Life Cycle Test:-20000 upto 25 mm, Above 25 mm:35000
7.8(Impeller, Chamber and Measuring Chamber )	-	-
7.9(Gears & Pinions )	-	-
7.1(Bearings)	-	-
7.11(Counter)	-	-
7.12(Dial)	-	-
7.13(Regulator)	-	-
7.14(Sealing)	-	-
7.15(Frost protection device)	-	-
8.1 & 8.2(Indicating device)	-	-
8.3(Value of verification Scale division )	-	-
8.4(Acceleration Device)	-	-
9.1, table 2(i)Threads )	-	-
9.1, table 4( ‘b’ )	-	-
9.1, table 5(iii) Overall Length (with nipple))	-	-
9.1, table 6(iv)Overall Width )	-	-
9.1, table 7(v)Overall Height H1)	-	-
9.1, table 8( H2 )	-	-
10.1(Pressure tightness)	-	-
10.2(Loss of pressure)	-	-
11.1(Metering Accuracy)	-	-
11.2(Min. Starting flow)	-	-
10.3(Temp. suitability )	-	-
10.1(Pressure tightness)	-	-
10.2(Loss of pressure)	-	-
11.1(Metering Accuracy)	-	-
12.4.3(Construction)	-	-
12.4.4(Life test )	-	-
10.1(Pressure tightness)	-	-
10.2(Loss of pressure)	-	-
11.1(Metering Accuracy)	-	-
11.2(Min. Starting flow)	-	-
10.3(Temp. suitability )	-	-
10.1(Pressure tightness)	-	-
10.2(Loss of pressure)	-	-
11.1(Metering Accuracy)	-	-
12.4.2(Construction)	-	-
9.1, table 3(ii)Thread Length ‘a’ )	-	-
Cl-6.1.1 (b)(Elongation)	-	-
Cl-6.1.1 (c)(Water absorption on immersion)	-	-
Cl-6.1.1 (d)(withstanding temperature)	-	-

22 May, 2029

-
-

IS 8034 (2018)

Submersible pumpsets - Specification (Third Revision)

0.5 KW - 29 KW

5800 View breakup
upto 15Kw = Rs. 17,700/- Above 15Kw and upto 20Kw = Rs. 18,750/- Above 20Kw and upto 25Kw = Rs. 20,100/- Above 25Kw and upto 29Kw = Rs. 22,275/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1.1(Design features: Typical design features 0f components of pump)	-	500	0.5 KW - 3.7 KW 5800/- 3.7KW -7.5KW 7500/- 7.5KW -11KW 9200/- 11KW -15KW 15,000/- 15.1 KW - 20 KW 17,700/- 20.1 KW - 25 KW 20,100/- 25.1 KW - 29 KW 22,275/-
7.1.2(Design features: Typical design features 0f components of pump)	-	500	0.5 KW - 3.7 KW 5800/- 3.7KW -7.5KW 7500/- 7.5KW -11KW 9200/- 11KW -15KW 15,000/- 15.1 KW - 20 KW 17,700/- 20.1 KW - 25 KW 20,100/- 25.1 KW - 29 KW 22,275/-
7.1.3(Design features: Typical design features 0f components of pump)	-	500	0.5 KW - 3.7 KW 5800/- 3.7KW -7.5KW 7500/- 7.5KW -11KW 9200/- 11KW -15KW 15,000/- 15.1 KW - 20 KW 17,700/- 20.1 KW - 25 KW 20,100/- 25.1 KW - 29 KW 22,275/-
7.1.4(Design features: Typical design features 0f components of pump)	-	500	0.5 KW - 3.7 KW 5800/- 3.7KW -7.5KW 7500/- 7.5KW -11KW 9200/- 11KW -15KW 15,000/- 15.1 KW - 20 KW 17,700/- 20.1 KW - 25 KW 20,100/- 25.1 KW - 29 KW 22,275/-
7.1.5(Design features: Typical design features 0f components of pump)	-	500	0.5 KW - 3.7 KW 5800/- 3.7KW -7.5KW 7500/- 7.5KW -11KW 9200/- 11KW -15KW 15,000/- 15.1 KW - 20 KW 17,700/- 20.1 KW - 25 KW 20,100/- 25.1 KW - 29 KW 22,275/-
7.1.6(Design features: Typical design features 0f components of pump)	-	500	0.5 KW - 3.7 KW 5800/- 3.7KW -7.5KW 7500/- 7.5KW -11KW 9200/- 11KW -15KW 15,000/- 15.1 KW - 20 KW 17,700/- 20.1 KW - 25 KW 20,100/- 25.1 KW - 29 KW 22,275/-
8.5.1(Balancing)	-	2500	0.5 KW - 3.7 KW 5800/- 3.7KW -7.5KW 7500/- 7.5KW -11KW 9200/- 11KW -15KW 15,000/- 15.1 KW - 20 KW 17,700/- 20.1 KW - 25 KW 20,100/- 25.1 KW - 29 KW 22,275/-
8.5.2(Balancing)	-	2500	0.5 KW - 3.7 KW 5800/- 3.7KW -7.5KW 7500/- 7.5KW -11KW 9200/- 11KW -15KW 15,000/- 15.1 KW - 20 KW 17,700/- 20.1 KW - 25 KW 20,100/- 25.1 KW - 29 KW 22,275/-
11(Guarantee of Performance)	-	2500	0.5 KW - 3.7 KW 5800/- 3.7KW -7.5KW 7500/- 7.5KW -11KW 9200/- 11KW -15KW 15,000/- 15.1 KW - 20 KW 17,700/- 20.1 KW - 25 KW 20,100/- 25.1 KW - 29 KW 22,275/-
11.1.1(Guarantee of Performance)	-	2500	0.5 KW - 3.7 KW 5800/- 3.7KW -7.5KW 7500/- 7.5KW -11KW 9200/- 11KW -15KW 15,000/- 15.1 KW - 20 KW 17,700/- 20.1 KW - 25 KW 20,100/- 25.1 KW - 29 KW 22,275/-
11.1.2(Guarantee of Performance)	-	2500	0.5 KW - 3.7 KW 5800/- 3.7KW -7.5KW 7500/- 7.5KW -11KW 9200/- 11KW -15KW 15,000/- 15.1 KW - 20 KW 17,700/- 20.1 KW - 25 KW 20,100/- 25.1 KW - 29 KW 22,275/-
11.1.3(Guarantee of Performance)	-	2500	0.5 KW - 3.7 KW 5800/- 3.7KW -7.5KW 7500/- 7.5KW -11KW 9200/- 11KW -15KW 15,000/- 15.1 KW - 20 KW 17,700/- 20.1 KW - 25 KW 20,100/- 25.1 KW - 29 KW 22,275/-
11.1.4(Guarantee of Performance)	-	2500	0.5 KW - 3.7 KW 5800/- 3.7KW -7.5KW 7500/- 7.5KW -11KW 9200/- 11KW -15KW 15,000/- 15.1 KW - 20 KW 17,700/- 20.1 KW - 25 KW 20,100/- 25.1 KW - 29 KW 22,275/-
11.1.5(Guarantee of Performance)	-	2500	0.5 KW - 3.7 KW 5800/- 3.7KW -7.5KW 7500/- 7.5KW -11KW 9200/- 11KW -15KW 15,000/- 15.1 KW - 20 KW 17,700/- 20.1 KW - 25 KW 20,100/- 25.1 KW - 29 KW 22,275/-
8.4.1(Shaft)	-	1000	0.5 KW - 3.7 KW 5800/- 3.7KW -7.5KW 7500/- 7.5KW -11KW 9200/- 11KW -15KW 15,000/- 15.1 KW - 20 KW 17,700/- 20.1 KW - 25 KW 20,100/- 25.1 KW - 29 KW 22,275/-
8.4.2(Shaft)	-	1000	0.5 KW - 3.7 KW 5800/- 3.7KW -7.5KW 7500/- 7.5KW -11KW 9200/- 11KW -15KW 15,000/- 15.1 KW - 20 KW 17,700/- 20.1 KW - 25 KW 20,100/- 25.1 KW - 29 KW 22,275/-
14(Marking)	-	500	0.5 KW - 3.7 KW 5800/- 3.7KW -7.5KW 7500/- 7.5KW -11KW 9200/- 11KW -15KW 15,000/- 15.1 KW - 20 KW 17,700/- 20.1 KW - 25 KW 20,100/- 25.1 KW - 29 KW 22,275/-
6.2 (a)(Material of construction Part Sub Assembly Shaft Sleeve)	-	500	0.5 KW - 3.7 KW 5800/- 3.7KW -7.5KW 7500/- 7.5KW -11KW 9200/- 11KW -15KW 15,000/- 15.1 KW - 20 KW 17,700/- 20.1 KW - 25 KW 20,100/- 25.1 KW - 29 KW 22,275/-
6.2 (b)(Material of construction Part Sub Assembly Casing wear ring (if provided))	-	500	0.5 KW - 3.7 KW 5800/- 3.7KW -7.5KW 7500/- 7.5KW -11KW 9200/- 11KW -15KW 15,000/- 15.1 KW - 20 KW 17,700/- 20.1 KW - 25 KW 20,100/- 25.1 KW - 29 KW 22,275/-
6.2 (c)(Material of construction Part Sub Assembly Bush)	-	500	0.5 KW - 3.7 KW 5800/- 3.7KW -7.5KW 7500/- 7.5KW -11KW 9200/- 11KW -15KW 15,000/- 15.1 KW - 20 KW 17,700/- 20.1 KW - 25 KW 20,100/- 25.1 KW - 29 KW 22,275/-
6.1 (d)(Constructional Features)	-	500	0.5 KW - 3.7 KW 5800/- 3.7KW -7.5KW 7500/- 7.5KW -11KW 9200/- 11KW -15KW 15,000/- 15.1 KW - 20 KW 17,700/- 20.1 KW - 25 KW 20,100/- 25.1 KW - 29 KW 22,275/-
6.1 (e)(Constructional Features)	-	500	0.5 KW - 3.7 KW 5800/- 3.7KW -7.5KW 7500/- 7.5KW -11KW 9200/- 11KW -15KW 15,000/- 15.1 KW - 20 KW 17,700/- 20.1 KW - 25 KW 20,100/- 25.1 KW - 29 KW 22,275/-
6.2 (f)(Material of construction Part Sub Assembly Pump Bowl/Diffuser)	-	500	0.5 KW - 3.7 KW 5800/- 3.7KW -7.5KW 7500/- 7.5KW -11KW 9200/- 11KW -15KW 15,000/- 15.1 KW - 20 KW 17,700/- 20.1 KW - 25 KW 20,100/- 25.1 KW - 29 KW 22,275/-
8.1(General Requirements)	-	500	0.5 KW - 3.7 KW 5800/- 3.7KW -7.5KW 7500/- 7.5KW -11KW 9200/- 11KW -15KW 15,000/- 15.1 KW - 20 KW 17,700/- 20.1 KW - 25 KW 20,100/- 25.1 KW - 29 KW 22,275/-
6.2.2.1(Gaskets, Seals and Packings)	-	500	0.5 KW - 3.7 KW 5800/- 3.7KW -7.5KW 7500/- 7.5KW -11KW 9200/- 11KW -15KW 15,000/- 15.1 KW - 20 KW 17,700/- 20.1 KW - 25 KW 20,100/- 25.1 KW - 29 KW 22,275/-
6.2.2.2(Gaskets, Seals and Packings)	-	500	0.5 KW - 3.7 KW 5800/- 3.7KW -7.5KW 7500/- 7.5KW -11KW 9200/- 11KW -15KW 15,000/- 15.1 KW - 20 KW 17,700/- 20.1 KW - 25 KW 20,100/- 25.1 KW - 29 KW 22,275/-
6.2.3(Gaskets, Seals and Packings)	-	500	0.5 KW - 3.7 KW 5800/- 3.7KW -7.5KW 7500/- 7.5KW -11KW 9200/- 11KW -15KW 15,000/- 15.1 KW - 20 KW 17,700/- 20.1 KW - 25 KW 20,100/- 25.1 KW - 29 KW 22,275/-
6.2.5(Gaskets, Seals and Packings)	-	500	0.5 KW - 3.7 KW 5800/- 3.7KW -7.5KW 7500/- 7.5KW -11KW 9200/- 11KW -15KW 15,000/- 15.1 KW - 20 KW 17,700/- 20.1 KW - 25 KW 20,100/- 25.1 KW - 29 KW 22,275/-
12(Guarantee of workmanship and material)	-	500	0.5 KW - 3.7 KW 5800/- 3.7KW -7.5KW 7500/- 7.5KW -11KW 9200/- 11KW -15KW 15,000/- 15.1 KW - 20 KW 17,700/- 20.1 KW - 25 KW 20,100/- 25.1 KW - 29 KW 22,275/-
8.5(Balancing of rotor)	-	1000	0.5 KW - 3.7 KW 5800/- 3.7KW -7.5KW 7500/- 7.5KW -11KW 9200/- 11KW -15KW 15,000/- 15.1 KW - 20 KW 17,700/- 20.1 KW - 25 KW 20,100/- 25.1 KW - 29 KW 22,275/-
8.7(Direction of Rotation)	-	1000	0.5 KW - 3.7 KW 5800/- 3.7KW -7.5KW 7500/- 7.5KW -11KW 9200/- 11KW -15KW 15,000/- 15.1 KW - 20 KW 17,700/- 20.1 KW - 25 KW 20,100/- 25.1 KW - 29 KW 22,275/-
9.10 (b)(High Voltage test)	-	1000	0.5 KW - 3.7 KW 5800/- 3.7KW -7.5KW 7500/- 7.5KW -11KW 9200/- 11KW -15KW 15,000/- 15.1 KW - 20 KW 17,700/- 20.1 KW - 25 KW 20,100/- 25.1 KW - 29 KW 22,275/-
9.10 (c)(Measurement of Stator Resistance)	-	1000	0.5 KW - 3.7 KW 5800/- 3.7KW -7.5KW 7500/- 7.5KW -11KW 9200/- 11KW -15KW 15,000/- 15.1 KW - 20 KW 17,700/- 20.1 KW - 25 KW 20,100/- 25.1 KW - 29 KW 22,275/-
9.10 (d)(No Load Test at Rated Voltage)	-	2500	0.5 KW - 3.7 KW 5800/- 3.7KW -7.5KW 7500/- 7.5KW -11KW 9200/- 11KW -15KW 15,000/- 15.1 KW - 20 KW 17,700/- 20.1 KW - 25 KW 20,100/- 25.1 KW - 29 KW 22,275/-
9.10 (e)(Reduced voltage Running up test)	-	1000	0.5 KW - 3.7 KW 5800/- 3.7KW -7.5KW 7500/- 7.5KW -11KW 9200/- 11KW -15KW 15,000/- 15.1 KW - 20 KW 17,700/- 20.1 KW - 25 KW 20,100/- 25.1 KW - 29 KW 22,275/-
9.10 (f) & (g)(Locked Rotor Test)	-	1000	0.5 KW - 3.7 KW 5800/- 3.7KW -7.5KW 7500/- 7.5KW -11KW 9200/- 11KW -15KW 15,000/- 15.1 KW - 20 KW 17,700/- 20.1 KW - 25 KW 20,100/- 25.1 KW - 29 KW 22,275/-
9.10 (k)(Temperature rise test at reduced voltage)	-	1500	0.5 KW - 3.7 KW 5800/- 3.7KW -7.5KW 7500/- 7.5KW -11KW 9200/- 11KW -15KW 15,000/- 15.1 KW - 20 KW 17,700/- 20.1 KW - 25 KW 20,100/- 25.1 KW - 29 KW 22,275/-
9.1(General)	-	500	0.5 KW - 3.7 KW 5800/- 3.7KW -7.5KW 7500/- 7.5KW -11KW 9200/- 11KW -15KW 15,000/- 15.1 KW - 20 KW 17,700/- 20.1 KW - 25 KW 20,100/- 25.1 KW - 29 KW 22,275/-
8.2(Casing)	-	0	0.5 KW - 3.7 KW 5800/- 3.7KW -7.5KW 7500/- 7.5KW -11KW 9200/- 11KW -15KW 15,000/- 15.1 KW - 20 KW 17,700/- 20.1 KW - 25 KW 20,100/- 25.1 KW - 29 KW 22,275/-
8.3(Impeller)	-	0	0.5 KW - 3.7 KW 5800/- 3.7KW -7.5KW 7500/- 7.5KW -11KW 9200/- 11KW -15KW 15,000/- 15.1 KW - 20 KW 17,700/- 20.1 KW - 25 KW 20,100/- 25.1 KW - 29 KW 22,275/-
8.6(Submersible cable)	-	0	0.5 KW - 3.7 KW 5800/- 3.7KW -7.5KW 7500/- 7.5KW -11KW 9200/- 11KW -15KW 15,000/- 15.1 KW - 20 KW 17,700/- 20.1 KW - 25 KW 20,100/- 25.1 KW - 29 KW 22,275/-
8.8(Terminal Marking)	-	0	0.5 KW - 3.7 KW 5800/- 3.7KW -7.5KW 7500/- 7.5KW -11KW 9200/- 11KW -15KW 15,000/- 15.1 KW - 20 KW 17,700/- 20.1 KW - 25 KW 20,100/- 25.1 KW - 29 KW 22,275/-
8.9(Installation)	-	0	0.5 KW - 3.7 KW 5800/- 3.7KW -7.5KW 7500/- 7.5KW -11KW 9200/- 11KW -15KW 15,000/- 15.1 KW - 20 KW 17,700/- 20.1 KW - 25 KW 20,100/- 25.1 KW - 29 KW 22,275/-
9.10 (h)(Leakage current test)	-	0	0.5 KW - 3.7 KW 5800/- 3.7KW -7.5KW 7500/- 7.5KW -11KW 9200/- 11KW -15KW 15,000/- 15.1 KW - 20 KW 17,700/- 20.1 KW - 25 KW 20,100/- 25.1 KW - 29 KW 22,275/-
9.10 (j)(Temperature Rise Test at Rated Voltage)	-	0	0.5 KW - 3.7 KW 5800/- 3.7KW -7.5KW 7500/- 7.5KW -11KW 9200/- 11KW -15KW 15,000/- 15.1 KW - 20 KW 17,700/- 20.1 KW - 25 KW 20,100/- 25.1 KW - 29 KW 22,275/-
10(Pump Performance test)	-	0	0.5 KW - 3.7 KW 5800/- 3.7KW -7.5KW 7500/- 7.5KW -11KW 9200/- 11KW -15KW 15,000/- 15.1 KW - 20 KW 17,700/- 20.1 KW - 25 KW 20,100/- 25.1 KW - 29 KW 22,275/-
8.2(Casing)	-	0	-
8.3(Impeller)	-	0	-
8.6(Submersible cable)	-	0	-
8.8(Terminal Marking)	-	0	-
8.9(Installation)	-	0	-
9.10 (h)(Leakage current test)	-	0	-
9.10 (j)(Temperature Rise Test at Rated Voltage)	-	0	-
10(Pump Performance test)	-	0	-

22 May, 2029

-
Exclusion: Cl 9.10 (m) Momentary over-load test

IS 15658 (2021)

Concrete Paving Blocks - Specification ( First Revision )

M30, M35, M40, M50, M55

15800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Visual Rating of specimen after 50 cycles)	-	7800	For complete dimension and qualitative tests
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Visual Rating of specimen after 25 cycles)	-	7800	For complete dimension and qualitative tests
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Visual Rating of specimen after 10 cycles)	-	7800	For complete dimension and qualitative tests
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Cumulative Weight losses of specimen after 10, 25 & 50 cycles)	-	7800	For complete dimension and qualitative tests
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Weight losses of specimen after 50 cycles)	-	7800	For complete dimension and qualitative tests
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Weight losses of specimen after 25 cycles)	-	7800	For complete dimension and qualitative tests
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Weight losses of specimen after 10 cycles)	-	7800	For complete dimension and qualitative tests
Clause 7.3, Annex G(Average Breaking Load)	-	2500	For Complete Tensile and Flexural
Clause 7.3, Annex G(Individual Breaking Load)	-	2500	For Complete Tensile and Flexural
Clause 7.3, Annex F(Average Failure Load per unit Length)	-	2500	For Complete Tensile and Flexural
Clause 7.3, Annex F(Individual Failure Load per unit Length)	-	2500	For Complete Tensile and Flexural
Clause 7.3 & 9.1.4, Table 3, SI No. (v) b)(Average Flexural strength )	-	2500	For Complete Tensile and Flexural
Clause 7.3 & 9.1.4, Table 3, SI No. (v) a)(Indivdual Flexural strength (i))	-	2500	For Complete Tensile and Flexural
Clause 7.3 & 9.1.4, Table 3, SI No. (iv) b)(Average Tensile splitting strength )	-	2500	For Complete Tensile and Flexural
Clause 7.3 & 9.1.4, Table 3, SI No. (iv) a)(Indivdual Tensile splitting strength (i))	-	2500	For Complete Tensile and Flexural
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) b) ii)(Wet Abrasion resistance (Average of three test specimens))	-	2000	For dry abrassion-2000 extra (if required, not included in complete testing charges)
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) b) i)( Indivdual Wet Abrasion Resistance )	-	2000	For dry abrassion-2000 extra (if required, not included in complete testing charges)
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) a) ii)(Dry Abrasion resistance (Average of three test specimens))	-	2000	For Dry abrassion
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) a) i)( Indivdual Dry Abrasion Resistance )	-	2000	For Dry abrassion
Clause 7.3 & 9.1.4, Table 3, SI No. (ii) b)(Compressive strength (Average of eight test specimens))	-	1000	For Complete Compressive strength
Clause 7.3 & 9.1.4, Table 3, SI No. (ii) a)(Indivdual Compressive strength (i))	-	1000	For Complete Compressive strength
Clause 7.3 & 9.1.4, Table 3, SI No. (i) b)(Water absorption (Average of three test specimens))	-	2500	For Complete Water absorption
Clause 7.3 & 9.1.4, Table 3, SI No. (i) a)( Indivdual Water absorption)	-	2500	For Complete Water absorption
Clause 7.2 & 9.1.3, Table 2, SI No. (ix)(Deviation from squareness)	-	7800	For complete dimension and qualitative tests
Clause 7.2 & 9.1.3, Table 2, SI No. (viii)(Indivdual Ratio of wearing face area and Plan area (Asw/Asp))	-	7800	For complete dimension and qualitative tests
Clause 7.2 & 9.1.3, Table 2, SI No. (viii)(Ratio of wearing face area and Plan area (Asw/Asp))	-	7800	For complete dimension and qualitative tests
Clause 7.2 & 9.1.3, Table 2, SI No. (vii)(Indivdual Plan Area (Asp))	-	7800	For complete dimension and qualitative tests
Clause 7.2 & 9.1.3, Table 2, SI No. (vii)(Plan Area (Asp))	-	7800	For complete dimension and qualitative tests
Clause 7.2 & 9.1.3, Table 2, SI No. (vi)(Indivdual Thickness of wearing Layer)	-	7800	For complete dimension and qualitative tests
Clause 7.2 & 9.1.3, Table 2, SI No. (vi)(Thickness of wearing Layer)	-	7800	For complete dimension and qualitative tests
Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Indivdual Arris/chamfer, Depth)	-	7800	For complete dimension and qualitative tests
Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Arris/chamfer, Depth)	-	7800	For complete dimension and qualitative tests
Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Indivdual Arris/chamfer, Width)	-	7800	For complete dimension and qualitative tests
Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Arris/chamfer, Width)	-	7800	For complete dimension and qualitative tests
Clause 7.2, Table No. 2, SI No. (iv) (Indivdual Aspect Ratio, L/Th)	-	7800	For complete dimension and qualitative tests
Clause 7.2, Table No. 2, SI No. (iv) (Aspect Ratio, L/Th)	-	7800	For complete dimension and qualitative tests
Clause 7.2, Table No. 2, SI No. (iii) (Indivdual Thickness, Th)	-	7800	For complete dimension and qualitative tests
Clause 7.2, Table No. 2, SI No. (iii) (Thickness, Th)	-	7800	For complete dimension and qualitative tests
Clause 7.2, Table No. 2, SI No. (ii) (Indivdual Length, L)	-	7800	For complete dimension and qualitative tests
Clause 7.2, Table No. 2, SI No. (ii) (Length, L)	-	7800	For complete dimension and qualitative tests
Clause 7.2, Table No. 2, SI No. (i) (Indivdual Width, W)	-	7800	For complete dimension and qualitative tests
Clause 7.2, Table No. 2, SI No. (i) (Width, W)	-	7800	For complete dimension and qualitative tests
Clause 6.3 (Bonding and Delamination between the layers of paver blocks)	-	7800	For complete dimension and qualitative tests
Clause 7.1.3 (Colour and Texture)	-	7800	For complete dimension and qualitative tests
Clauses 7.1.2 & 9.1.2 (Visual Inspection)	-	7800	For complete dimension and qualitative tests
Clause 7.1.1 (General Quality)	-	7800	For complete dimension and qualitative tests
7.2- TABLE-2- (i) IS-15658 (Annex-B)(Individual Width - Lower)	-	7800	For complete dimension and qualitative tests
7.2- TABLE-2- (i) IS-15658 (Annex-B)(Average Width -Lower)	-	7800	For complete dimension and qualitative tests
7.2- TABLE-2- (i) IS-15658 (Annex-B)(Individual Width - Higher)	-	7800	For complete dimension and qualitative tests
7.2- TABLE-2- (i) IS-15658 (Annex-B)(Average Width -Higher)	-	7800	For complete dimension and qualitative tests
Clause 3.20(Spacer nibs)	-	7800	For complete dimension and qualitative tests
10(Marking)	-	7800	For complete dimension and qualitative tests
cl.5(Cement)	-	0	-
5.2(Mineral Admixture)	-	0	-
5.3(Chemical Admixtures)	-	0	-
5.4(Coarse and Fine Aggregates)	-	0	-
5.5(Pigments)	-	0	-
5.6(Water)	-	0	-

22 May, 2029

-
Included w.e.f. 05-05-2024

IS 2553 : Part 1 (2018)

Safety glass - Specification: Part 1 architectural, building and general uses (Fourth Revision)

23750 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Types)	-	5100	Rs.147,000/- without optional test, Rs.210,000/-with optional test Toughened safety glass:Rs. 23,750/-(for mandatory tests only),Toughened safety glass: Rs. 54,500/-(for all tests), Laminated safety glass Rs. 43,500/-(for mandatory tests only),Lam
5.1.1(General)	-	6000	Rs.147,000/- without optional test, Rs.210,000/-with optional test Toughened safety glass:Rs. 23,750/-(for mandatory tests only),Toughened safety glass: Rs. 54,500/-(for all tests), Laminated safety glass Rs. 43,500/-(for mandatory tests only),Lam
5.1.2(Optical Faults-IS 14900)	-	1500	Rs.147,000/- without optional test, Rs.210,000/-with optional test Toughened safety glass:Rs. 23,750/-(for mandatory tests only),Toughened safety glass: Rs. 54,500/-(for all tests), Laminated safety glass Rs. 43,500/-(for mandatory tests only),Lam
5.1.2(Spot Faults of category A/B/C/D -IS 14900)	-	1500	Rs.147,000/- without optional test, Rs.210,000/-with optional test Toughened safety glass:Rs. 23,750/-(for mandatory tests only),Toughened safety glass: Rs. 54,500/-(for all tests), Laminated safety glass Rs. 43,500/-(for mandatory tests only),Lam
5.1.2(Reams, Strings and Lines-IS 14900)	-	1500	Rs.147,000/- without optional test, Rs.210,000/-with optional test Toughened safety glass:Rs. 23,750/-(for mandatory tests only),Toughened safety glass: Rs. 54,500/-(for all tests), Laminated safety glass Rs. 43,500/-(for mandatory tests only),Lam
5.1.2(Linear / Extended Faults -IS 14900)	-	1500	Rs.147,000/- without optional test, Rs.210,000/-with optional test Toughened safety glass:Rs. 23,750/-(for mandatory tests only),Toughened safety glass: Rs. 54,500/-(for all tests), Laminated safety glass Rs. 43,500/-(for mandatory tests only),Lam
5.2.1 (Thickness -IS 17004 & IS 14900)	-	1025	Rs.147,000/- without optional test, Rs.210,000/-with optional test Toughened safety glass:Rs. 23,750/-(for mandatory tests only),Toughened safety glass: Rs. 54,500/-(for all tests), Laminated safety glass Rs. 43,500/-(for mandatory tests only),Lam
5.2.2.1( Dimensions- Width )	-	1000	Rs.147,000/- without optional test, Rs.210,000/-with optional test Toughened safety glass:Rs. 23,750/-(for mandatory tests only),Toughened safety glass: Rs. 54,500/-(for all tests), Laminated safety glass Rs. 43,500/-(for mandatory tests only),Lam
5.2.2.1( Dimensions- Length)	-	1000	Rs.147,000/- without optional test, Rs.210,000/-with optional test Toughened safety glass:Rs. 23,750/-(for mandatory tests only),Toughened safety glass: Rs. 54,500/-(for all tests), Laminated safety glass Rs. 43,500/-(for mandatory tests only),Lam
5.2.2.2( Squareness)	-	1000	Rs.147,000/- without optional test, Rs.210,000/-with optional test Toughened safety glass:Rs. 23,750/-(for mandatory tests only),Toughened safety glass: Rs. 54,500/-(for all tests), Laminated safety glass Rs. 43,500/-(for mandatory tests only),Lam
5.2.3 (Fragmentation Test- IS 17004)	-	10900	Rs.147,000/- without optional test, Rs.210,000/-with optional test Toughened safety glass:Rs. 23,750/-(for mandatory tests only),Toughened safety glass: Rs. 54,500/-(for all tests), Laminated safety glass Rs. 43,500/-(for mandatory tests only),Lam
5.2.4-a( Flatness-Overall bow-IS 17004)	-	1075	Rs.147,000/- without optional test, Rs.210,000/-with optional test Toughened safety glass:Rs. 23,750/-(for mandatory tests only),Toughened safety glass: Rs. 54,500/-(for all tests), Laminated safety glass Rs. 43,500/-(for mandatory tests only),Lam
5.2.4-b( Flatness-Roller wave distortion-IS 17005)	-	1075	Rs.147,000/- without optional test, Rs.210,000/-with optional test Toughened safety glass:Rs. 23,750/-(for mandatory tests only),Toughened safety glass: Rs. 54,500/-(for all tests), Laminated safety glass Rs. 43,500/-(for mandatory tests only),Lam
5.2.4-c( Flatness-Edge lift-IS 17006)	-	1075	Rs.147,000/- without optional test, Rs.210,000/-with optional test Toughened safety glass:Rs. 23,750/-(for mandatory tests only),Toughened safety glass: Rs. 54,500/-(for all tests), Laminated safety glass Rs. 43,500/-(for mandatory tests only),Lam
5.2.4-d( Flatness-Local distortion-IS 17007)	-	1075	Rs.147,000/- without optional test, Rs.210,000/-with optional test Toughened safety glass:Rs. 23,750/-(for mandatory tests only),Toughened safety glass: Rs. 54,500/-(for all tests), Laminated safety glass Rs. 43,500/-(for mandatory tests only),Lam
5.2.4.1 (Other distortions)	-	1000	Rs.147,000/- without optional test, Rs.210,000/-with optional test Toughened safety glass:Rs. 23,750/-(for mandatory tests only),Toughened safety glass: Rs. 54,500/-(for all tests), Laminated safety glass Rs. 43,500/-(for mandatory tests only),Lam
5.2.5.1( Resistance to shock- IS 17004)	-	33200	Rs.147,000/- without optional test, Rs.210,000/-with optional test Toughened safety glass:Rs. 23,750/-(for mandatory tests only),Toughened safety glass: Rs. 54,500/-(for all tests), Laminated safety glass Rs. 43,500/-(for mandatory tests only),Lam
5.2.5.2( Resistance to human impact- IS 17004)	-	18400	Rs.147,000/- without optional test, Rs.210,000/-with optional test Toughened safety glass:Rs. 23,750/-(for mandatory tests only),Toughened safety glass: Rs. 54,500/-(for all tests), Laminated safety glass Rs. 43,500/-(for mandatory tests only),Lam
5.2.6( Surface Compression (Optional)- IS 17004)	-	8100	Rs.147,000/- without optional test, Rs.210,000/-with optional test Toughened safety glass:Rs. 23,750/-(for mandatory tests only),Toughened safety glass: Rs. 54,500/-(for all tests), Laminated safety glass Rs. 43,500/-(for mandatory tests only),Lam
5.2.7( Mechanical Strength — Four Point Bending Test (Optional)- IS 17004)	-	20500	Rs.147,000/- without optional test, Rs.210,000/-with optional test Toughened safety glass:Rs. 23,750/-(for mandatory tests only),Toughened safety glass: Rs. 54,500/-(for all tests), Laminated safety glass Rs. 43,500/-(for mandatory tests only),Lam
5.2.8.1 & 5.2.8.3-Table 7(Diameter of Holes & Deviations on holes )	-	5350	Rs.147,000/- without optional test, Rs.210,000/-with optional test Toughened safety glass:Rs. 23,750/-(for mandatory tests only),Toughened safety glass: Rs. 54,500/-(for all tests), Laminated safety glass Rs. 43,500/-(for mandatory tests only),Lam
5.2.8.3-Table 8(Deviations on position of holes and Cutouts Location)	-	5350	Rs.147,000/- without optional test, Rs.210,000/-with optional test Toughened safety glass:Rs. 23,750/-(for mandatory tests only),Toughened safety glass: Rs. 54,500/-(for all tests), Laminated safety glass Rs. 43,500/-(for mandatory tests only),Lam
5.3.1 (Thickness-IS 17004 & IS 14900)	-	2100	Rs.147,000/- without optional test, Rs.210,000/-with optional test Toughened safety glass:Rs. 23,750/-(for mandatory tests only),Toughened safety glass: Rs. 54,500/-(for all tests), Laminated safety glass Rs. 43,500/-(for mandatory tests only),Lam
5.3.2.1( Dimensions and squareness- Width )	-	1067	Rs.147,000/- without optional test, Rs.210,000/-with optional test Toughened safety glass:Rs. 23,750/-(for mandatory tests only),Toughened safety glass: Rs. 54,500/-(for all tests), Laminated safety glass Rs. 43,500/-(for mandatory tests only),Lam
5.3.2.1( Dimensions and squareness- Length)	-	1067	Rs.147,000/- without optional test, Rs.210,000/-with optional test Toughened safety glass:Rs. 23,750/-(for mandatory tests only),Toughened safety glass: Rs. 54,500/-(for all tests), Laminated safety glass Rs. 43,500/-(for mandatory tests only),Lam
5.3.2.1( Dimensions and squareness-Squareness)	-	1067	Rs.147,000/- without optional test, Rs.210,000/-with optional test Toughened safety glass:Rs. 23,750/-(for mandatory tests only),Toughened safety glass: Rs. 54,500/-(for all tests), Laminated safety glass Rs. 43,500/-(for mandatory tests only),Lam
5.3.2.2 (Edge displacement)	-	2500	Rs.147,000/- without optional test, Rs.210,000/-with optional test Toughened safety glass:Rs. 23,750/-(for mandatory tests only),Toughened safety glass: Rs. 54,500/-(for all tests), Laminated safety glass Rs. 43,500/-(for mandatory tests only),Lam
5.3.3( Light Stability Test-IS 17004)	-	9600	Rs.147,000/- without optional test, Rs.210,000/-with optional test Toughened safety glass:Rs. 23,750/-(for mandatory tests only),Toughened safety glass: Rs. 54,500/-(for all tests), Laminated safety glass Rs. 43,500/-(for mandatory tests only),Lam
5.3.3( Light Stability Test-IS 17004)	-	9600	Rs.147,000/- without optional test, Rs.210,000/-with optional test Toughened safety glass:Rs. 23,750/-(for mandatory tests only),Toughened safety glass: Rs. 54,500/-(for all tests), Laminated safety glass Rs. 43,500/-(for mandatory tests only),Lam
5.3.4( Boil and Bake Tests-IS 17004)	-	5700	Rs.147,000/- without optional test, Rs.210,000/-with optional test Toughened safety glass:Rs. 23,750/-(for mandatory tests only),Toughened safety glass: Rs. 54,500/-(for all tests), Laminated safety glass Rs. 43,500/-(for mandatory tests only),Lam
5.3.5( Fracture and Adhesion Test-IS 17004)	-	3500	Rs.147,000/- without optional test, Rs.210,000/-with optional test Toughened safety glass:Rs. 23,750/-(for mandatory tests only),Toughened safety glass: Rs. 54,500/-(for all tests), Laminated safety glass Rs. 43,500/-(for mandatory tests only),Lam
5.3.6.1( Spot defects in the central area)	-	580	Rs.147,000/- without optional test, Rs.210,000/-with optional test Toughened safety glass:Rs. 23,750/-(for mandatory tests only),Toughened safety glass: Rs. 54,500/-(for all tests), Laminated safety glass Rs. 43,500/-(for mandatory tests only),Lam
5.3.6.2 (Linear defects in the central area)	-	580	Rs.147,000/- without optional test, Rs.210,000/-with optional test Toughened safety glass:Rs. 23,750/-(for mandatory tests only),Toughened safety glass: Rs. 54,500/-(for all tests), Laminated safety glass Rs. 43,500/-(for mandatory tests only),Lam
5.3.6.3( Defects in the outer area for framed edges)	-	580	Rs.147,000/- without optional test, Rs.210,000/-with optional test Toughened safety glass:Rs. 23,750/-(for mandatory tests only),Toughened safety glass: Rs. 54,500/-(for all tests), Laminated safety glass Rs. 43,500/-(for mandatory tests only),Lam
5.3.6.4( Vents)	-	580	Rs.147,000/- without optional test, Rs.210,000/-with optional test Toughened safety glass:Rs. 23,750/-(for mandatory tests only),Toughened safety glass: Rs. 54,500/-(for all tests), Laminated safety glass Rs. 43,500/-(for mandatory tests only),Lam
5.3.6.5( Creases and streaks)	-	580	Rs.147,000/- without optional test, Rs.210,000/-with optional test Toughened safety glass:Rs. 23,750/-(for mandatory tests only),Toughened safety glass: Rs. 54,500/-(for all tests), Laminated safety glass Rs. 43,500/-(for mandatory tests only),Lam
5.3.6.6( Defects on edge which will not be framed)	-	580	Rs.147,000/- without optional test, Rs.210,000/-with optional test Toughened safety glass:Rs. 23,750/-(for mandatory tests only),Toughened safety glass: Rs. 54,500/-(for all tests), Laminated safety glass Rs. 43,500/-(for mandatory tests only),Lam
5.3.7( Humidity Test – Optional)	-	51400	Rs.147,000/- without optional test, Rs.210,000/-with optional test Toughened safety glass:Rs. 23,750/-(for mandatory tests only),Toughened safety glass: Rs. 54,500/-(for all tests), Laminated safety glass Rs. 43,500/-(for mandatory tests only),Lam
5.3.8( Resistance to Human Impact Test)	-	18400	Rs.147,000/- without optional test, Rs.210,000/-with optional test Toughened safety glass:Rs. 23,750/-(for mandatory tests only),Toughened safety glass: Rs. 54,500/-(for all tests), Laminated safety glass Rs. 43,500/-(for mandatory tests only),Lam
4(Types)	-	0	-
5.1.1(General)	-	0	-
5.1.2(Optical Faults-IS 14900)	-	0	-
5.1.2(Spot Faults of category A/B/C/D -IS 14900)	-	0	-
5.1.2(Reams, Strings and Lines-IS 14900)	-	0	-
5.1.2(Linear / Extended Faults -IS 14900)	-	0	-
5.2.1 (Thickness -IS 17004 & IS 14900)	-	0	-
5.2.2.1( Dimensions- Width )	-	0	-
5.2.2.1( Dimensions- Length)	-	0	-
5.2.2.2( Squareness)	-	0	-
5.2.3 (Fragmentation Test- IS 17004)	-	0	-
5.2.4-a( Flatness-Overall bow-IS 17004)	-	0	-
5.2.4-b( Flatness-Roller wave distortion-IS 17005)	-	0	-
5.2.4-c( Flatness-Edge lift-IS 17006)	-	0	-
5.2.4-d( Flatness-Local distortion-IS 17007)	-	0	-
5.2.4.1 (Other distortions)	-	0	-
5.2.5.1( Resistance to shock- IS 17004)	-	0	-
5.2.5.2( Resistance to human impact- IS 17004)	-	0	-
5.2.6( Surface Compression (Optional)- IS 17004)	-	0	-
5.2.7( Mechanical Strength — Four Point Bending Test (Optional)- IS 17004)	-	0	-
5.2.8.1 & 5.2.8.3-Table 7(Diameter of Holes & Deviations on holes )	-	0	-
5.2.8.3-Table 8(Deviations on position of holes and Cutouts Location)	-	0	-
5.3.1 (Thickness-IS 17004 & IS 14900)	-	0	-
5.3.2.1( Dimensions and squareness- Width )	-	0	-
5.3.2.1( Dimensions and squareness- Length)	-	0	-
5.3.2.1( Dimensions and squareness-Squareness)	-	0	-
5.3.2.2 (Edge displacement)	-	0	-
5.3.3( Light Stability Test-IS 17004)	-	0	-
5.3.3( Light Stability Test-IS 17004)	-	0	-
5.3.4( Boil and Bake Tests-IS 17004)	-	0	-
5.3.5( Fracture and Adhesion Test-IS 17004)	-	0	-
5.3.6.1( Spot defects in the central area)	-	0	-
5.3.6.2 (Linear defects in the central area)	-	0	-
5.3.6.3( Defects in the outer area for framed edges)	-	0	-
5.3.6.4( Vents)	-	0	-
5.3.6.5( Creases and streaks)	-	0	-
5.3.6.6( Defects on edge which will not be framed)	-	0	-
5.3.7( Humidity Test – Optional)	-	0	-
5.3.8( Resistance to Human Impact Test)	-	0	-
5.2.1(Thickness)	-	0	-
5.2.2(Dimension and Squarenes)	-	0	-
5.2.4(Overall Bow)	-	0	-
5.2.4(Measurement of wave and roller wave)	-	0	-
5.2.4(Edge lift)	-	0	-
5.2.4(Local distortion)	-	0	-
5.2.3(Fragmentation test)	-	0	-
5.2.7(Four point bending)	-	0	-
5.2.6(Surface compression)	-	0	-
5.2.5.1(Resistance to shock)	-	0	-
5.2.5.2(Resistance to human impact)	-	0	-
5.3.1(Thickness test)	-	0	-
5.3.2.1(Dimension and Squarenes test)	-	0	-
5.3.6(Defects in central area test)	-	0	-
5.3.6.7(Defects in central area test)	-	0	-
5.3.5(Fracture and adhesion)	-	0	-
5.3.8(Resistance to human impact)	-	0	-
5.3.4(Boil test)	-	0	-
5.3.4(Bake test)	-	0	-
5.3.7(Humidity test with condensation)	-	0	-
5.3.7(Humidity test without condensation)	-	0	-
5.3.3(Light stability test)	-	0	-
5.3.2.2(Edge displacement test)	-	0	-
5.2.2(5.2.2 Dimension and Squarenes test)	-	0	-
5.2.4(measurement of wave and roller wave)	-	0	-
5.2.8(Fabrication in Glass)	-	0	-
Cl. No. 5.2.2.3.1, Table No. 1A(Shape accuracy, girth and length)	-	0	-
Cl. No. 5.2.2.3.2(Edge straightness deviation)	-	0	-
Cl. No. 5.2.2.3.3(Maximum cross-curve deviation)	-	0	-
4(Types)	-	0	-
5.1.1(General)	-	0	-
5.1.2(Optical Faults-IS 14900)	-	0	-
5.1.2(Spot Faults of category A/B/C/D -IS 14900)	-	0	-
5.1.2(Reams, Strings and Lines-IS 14900)	-	0	-
5.1.2(Linear / Extended Faults -IS 14900)	-	0	-
5.2.1 (Thickness -IS 17004 & IS 14900)	-	0	-
5.2.2.1( Dimensions- Width )	-	0	-
5.2.2.1( Dimensions- Length)	-	0	-
5.2.2.2( Squareness)	-	0	-
5.2.3 (Fragmentation Test- IS 17004)	-	0	-
5.2.4-a( Flatness-Overall bow-IS 17004)	-	0	-
5.2.4-b( Flatness-Roller wave distortion-IS 17005)	-	0	-
5.2.4-c( Flatness-Edge lift-IS 17006)	-	0	-
5.2.4-d( Flatness-Local distortion-IS 17007)	-	0	-
5.2.4.1 (Other distortions)	-	0	-
5.2.5.1( Resistance to shock- IS 17004)	-	0	-
5.2.5.2( Resistance to human impact- IS 17004)	-	0	-
5.2.6( Surface Compression (Optional)- IS 17004)	-	0	-
5.2.7( Mechanical Strength — Four Point Bending Test (Optional)- IS 17004)	-	0	-
5.2.8.1 & 5.2.8.3-Table 7(Diameter of Holes & Deviations on holes )	-	0	-
5.2.8.3-Table 8(Deviations on position of holes and Cutouts Location)	-	0	-
5.3.1 (Thickness-IS 17004 & IS 14900)	-	0	-
5.3.2.1( Dimensions and squareness- Width )	-	0	-
5.3.2.1( Dimensions and squareness- Length)	-	0	-
5.3.2.1( Dimensions and squareness-Squareness)	-	0	-
5.3.2.2 (Edge displacement)	-	0	-
5.3.3( Light Stability Test-IS 17004)	-	0	-
5.3.3( Light Stability Test-IS 17004)	-	0	-
5.3.4( Boil and Bake Tests-IS 17004)	-	0	-
5.3.5( Fracture and Adhesion Test-IS 17004)	-	0	-
5.3.6.1( Spot defects in the central area)	-	0	-
5.3.6.2 (Linear defects in the central area)	-	0	-
5.3.6.3( Defects in the outer area for framed edges)	-	0	-
5.3.6.4( Vents)	-	0	-
5.3.6.5( Creases and streaks)	-	0	-
5.3.6.6( Defects on edge which will not be framed)	-	0	-
5.3.7( Humidity Test – Optional)	-	0	-
5.3.8( Resistance to Human Impact Test)	-	0	-
4(Types)	-	0	-
5.1.1(General)	-	0	-
5.1.2(Optical Faults-IS 14900)	-	0	-
5.1.2(Spot Faults of category A/B/C/D -IS 14900)	-	0	-
5.1.2(Reams, Strings and Lines-IS 14900)	-	0	-
5.1.2(Linear / Extended Faults -IS 14900)	-	0	-
5.2.1 (Thickness -IS 17004 & IS 14900)	-	0	-
5.2.2.1( Dimensions- Width )	-	0	-
5.2.2.1( Dimensions- Length)	-	0	-
5.2.2.2( Squareness)	-	0	-
5.2.3 (Fragmentation Test- IS 17004)	-	0	-
5.2.4-a( Flatness-Overall bow-IS 17004)	-	0	-
5.2.4-b( Flatness-Roller wave distortion-IS 17005)	-	0	-
5.2.4-c( Flatness-Edge lift-IS 17006)	-	0	-
5.2.4-d( Flatness-Local distortion-IS 17007)	-	0	-
5.2.4.1 (Other distortions)	-	0	-
5.2.5.1( Resistance to shock- IS 17004)	-	0	-
5.2.5.2( Resistance to human impact- IS 17004)	-	0	-
5.2.6( Surface Compression (Optional)- IS 17004)	-	0	-
5.2.7( Mechanical Strength — Four Point Bending Test (Optional)- IS 17004)	-	0	-
5.2.8.1 & 5.2.8.3-Table 7(Diameter of Holes & Deviations on holes )	-	0	-
5.2.8.3-Table 8(Deviations on position of holes and Cutouts Location)	-	0	-
5.3.1 (Thickness-IS 17004 & IS 14900)	-	0	-
5.3.2.1( Dimensions and squareness- Width )	-	0	-
5.3.2.1( Dimensions and squareness- Length)	-	0	-
5.3.2.1( Dimensions and squareness-Squareness)	-	0	-
5.3.2.2 (Edge displacement)	-	0	-
5.3.3( Light Stability Test-IS 17004)	-	0	-
5.3.3( Light Stability Test-IS 17004)	-	0	-
5.3.4( Boil and Bake Tests-IS 17004)	-	0	-
5.3.5( Fracture and Adhesion Test-IS 17004)	-	0	-
5.3.6.1( Spot defects in the central area)	-	0	-
5.3.6.2 (Linear defects in the central area)	-	0	-
5.3.6.3( Defects in the outer area for framed edges)	-	0	-
5.3.6.4( Vents)	-	0	-
5.3.6.5( Creases and streaks)	-	0	-
5.3.6.6( Defects on edge which will not be framed)	-	0	-
5.3.7( Humidity Test – Optional)	-	0	-
5.3.8( Resistance to Human Impact Test)	-	0	-
5.2.1(Thickness)	-	0	-
5.2.2(Dimension and Squarenes)	-	0	-
5.2.4(Overall Bow)	-	0	-
5.2.4(Measurement of wave and roller wave)	-	0	-
5.2.4(Edge lift)	-	0	-
5.2.4(Local distortion)	-	0	-
5.2.3(Fragmentation test)	-	0	-
5.2.7(Four point bending)	-	0	-
5.2.6(Surface compression)	-	0	-
5.2.5.1(Resistance to shock)	-	0	-
5.2.5.2(Resistance to human impact)	-	0	-
5.3.1(Thickness test)	-	0	-
5.3.2.1(Dimension and Squarenes test)	-	0	-
5.3.6(Defects in central area test)	-	0	-
5.3.6.7(Defects in central area test)	-	0	-
5.3.5(Fracture and adhesion)	-	0	-
5.3.8(Resistance to human impact)	-	0	-
5.3.4(Boil test)	-	0	-
5.3.4(Bake test)	-	0	-
5.3.7(Humidity test with condensation)	-	0	-
5.3.7(Humidity test without condensation)	-	0	-
5.3.3(Light stability test)	-	0	-
5.3.2.2(Edge displacement test)	-	0	-
5.2.2(5.2.2 Dimension and Squarenes test)	-	0	-
5.2.4(measurement of wave and roller wave)	-	0	-
5.2.8(Fabrication in Glass)	-	0	-
Cl. No. 5.2.2.3.1, Table No. 1A(Shape accuracy, girth and length)	-	0	-
Cl. No. 5.2.2.3.2(Edge straightness deviation)	-	0	-
Cl. No. 5.2.2.3.3(Maximum cross-curve deviation)	-	0	-
4(Types)	-	0	-
5.1.1(General)	-	0	-
5.1.2(Optical Faults-IS 14900)	-	0	-
5.1.2(Spot Faults of category A/B/C/D -IS 14900)	-	0	-
5.1.2(Reams, Strings and Lines-IS 14900)	-	0	-
5.1.2(Linear / Extended Faults -IS 14900)	-	0	-
5.2.1 (Thickness -IS 17004 & IS 14900)	-	0	-
5.2.2.1( Dimensions- Width )	-	0	-
5.2.2.1( Dimensions- Length)	-	0	-
5.2.2.2( Squareness)	-	0	-
5.2.3 (Fragmentation Test- IS 17004)	-	0	-
5.2.4-a( Flatness-Overall bow-IS 17004)	-	0	-
5.2.4-b( Flatness-Roller wave distortion-IS 17005)	-	0	-
5.2.4-c( Flatness-Edge lift-IS 17006)	-	0	-
5.2.4-d( Flatness-Local distortion-IS 17007)	-	0	-
5.2.4.1 (Other distortions)	-	0	-
5.2.5.1( Resistance to shock- IS 17004)	-	0	-
5.2.5.2( Resistance to human impact- IS 17004)	-	0	-
5.2.6( Surface Compression (Optional)- IS 17004)	-	0	-
5.2.7( Mechanical Strength — Four Point Bending Test (Optional)- IS 17004)	-	0	-
5.2.8.1 & 5.2.8.3-Table 7(Diameter of Holes & Deviations on holes )	-	0	-
5.2.8.3-Table 8(Deviations on position of holes and Cutouts Location)	-	0	-
5.3.1 (Thickness-IS 17004 & IS 14900)	-	0	-
5.3.2.1( Dimensions and squareness- Width )	-	0	-
5.3.2.1( Dimensions and squareness- Length)	-	0	-
5.3.2.1( Dimensions and squareness-Squareness)	-	0	-
5.3.2.2 (Edge displacement)	-	0	-
5.3.3( Light Stability Test-IS 17004)	-	0	-
5.3.3( Light Stability Test-IS 17004)	-	0	-
5.3.4( Boil and Bake Tests-IS 17004)	-	0	-
5.3.5( Fracture and Adhesion Test-IS 17004)	-	0	-
5.3.6.1( Spot defects in the central area)	-	0	-
5.3.6.2 (Linear defects in the central area)	-	0	-
5.3.6.3( Defects in the outer area for framed edges)	-	0	-
5.3.6.4( Vents)	-	0	-
5.3.6.5( Creases and streaks)	-	0	-
5.3.6.6( Defects on edge which will not be framed)	-	0	-
5.3.7( Humidity Test – Optional)	-	0	-
5.3.8( Resistance to Human Impact Test)	-	0	-
4(Types)	-	0	-
5.1.1(General)	-	0	-
5.1.2(Optical Faults-IS 14900)	-	0	-
5.1.2(Spot Faults of category A/B/C/D -IS 14900)	-	0	-
5.1.2(Reams, Strings and Lines-IS 14900)	-	0	-
5.1.2(Linear / Extended Faults -IS 14900)	-	0	-
5.2.1 (Thickness -IS 17004 & IS 14900)	-	0	-
5.2.2.1( Dimensions- Width )	-	0	-
5.2.2.1( Dimensions- Length)	-	0	-
5.2.2.2( Squareness)	-	0	-
5.2.3 (Fragmentation Test- IS 17004)	-	0	-
5.2.4-a( Flatness-Overall bow-IS 17004)	-	0	-
5.2.4-b( Flatness-Roller wave distortion-IS 17005)	-	0	-
5.2.4-c( Flatness-Edge lift-IS 17006)	-	0	-
5.2.4-d( Flatness-Local distortion-IS 17007)	-	0	-
5.2.4.1 (Other distortions)	-	0	-
5.2.5.1( Resistance to shock- IS 17004)	-	0	-
5.2.5.2( Resistance to human impact- IS 17004)	-	0	-
5.2.6( Surface Compression (Optional)- IS 17004)	-	0	-
5.2.7( Mechanical Strength — Four Point Bending Test (Optional)- IS 17004)	-	0	-
5.2.8.1 & 5.2.8.3-Table 7(Diameter of Holes & Deviations on holes )	-	0	-
5.2.8.3-Table 8(Deviations on position of holes and Cutouts Location)	-	0	-
5.3.1 (Thickness-IS 17004 & IS 14900)	-	0	-
5.3.2.1( Dimensions and squareness- Width )	-	0	-
5.3.2.1( Dimensions and squareness- Length)	-	0	-
5.3.2.1( Dimensions and squareness-Squareness)	-	0	-
5.3.2.2 (Edge displacement)	-	0	-
5.3.3( Light Stability Test-IS 17004)	-	0	-
5.3.3( Light Stability Test-IS 17004)	-	0	-
5.3.4( Boil and Bake Tests-IS 17004)	-	0	-
5.3.5( Fracture and Adhesion Test-IS 17004)	-	0	-
5.3.6.1( Spot defects in the central area)	-	0	-
5.3.6.2 (Linear defects in the central area)	-	0	-
5.3.6.3( Defects in the outer area for framed edges)	-	0	-
5.3.6.4( Vents)	-	0	-
5.3.6.5( Creases and streaks)	-	0	-
5.3.6.6( Defects on edge which will not be framed)	-	0	-
5.3.7( Humidity Test – Optional)	-	0	-
5.3.8( Resistance to Human Impact Test)	-	0	-
5.2.1(Thickness)	-	0	-
5.2.2(Dimension and Squarenes)	-	0	-
5.2.4(Overall Bow)	-	0	-
5.2.4(Measurement of wave and roller wave)	-	0	-
5.2.4(Edge lift)	-	0	-
5.2.4(Local distortion)	-	0	-
5.2.3(Fragmentation test)	-	0	-
5.2.7(Four point bending)	-	0	-
5.2.6(Surface compression)	-	0	-
5.2.5.1(Resistance to shock)	-	0	-
5.2.5.2(Resistance to human impact)	-	0	-
5.3.1(Thickness test)	-	0	-
5.3.2.1(Dimension and Squarenes test)	-	0	-
5.3.6(Defects in central area test)	-	0	-
5.3.6.7(Defects in central area test)	-	0	-
5.3.5(Fracture and adhesion)	-	0	-
5.3.8(Resistance to human impact)	-	0	-
5.3.4(Boil test)	-	0	-
5.3.4(Bake test)	-	0	-
5.3.7(Humidity test with condensation)	-	0	-
5.3.7(Humidity test without condensation)	-	0	-
5.3.3(Light stability test)	-	0	-
5.3.2.2(Edge displacement test)	-	0	-
5.2.2(5.2.2 Dimension and Squarenes test)	-	0	-
5.2.4(measurement of wave and roller wave)	-	0	--
5.2.8(Fabrication in Glass)	-	0	-
Cl. No. 5.2.2.3.1, Table No. 1A(Shape accuracy, girth and length)	-	0	-
Cl. No. 5.2.2.3.2(Edge straightness deviation)	-	0	-
Cl. No. 5.2.2.3.3(Maximum cross-curve deviation)	-	0	-
4(Types)	-	0	-
5.1.1(General)	-	0	-
5.1.2(Optical Faults-IS 14900)	-	0	-
5.1.2(Spot Faults of category A/B/C/D -IS 14900)	-	0	-
5.1.2(Reams, Strings and Lines-IS 14900)	-	0	-
5.1.2(Linear / Extended Faults -IS 14900)	-	0	-
5.2.1 (Thickness -IS 17004 & IS 14900)	-	0	-
5.2.2.1( Dimensions- Width )	-	0	-
5.2.2.1( Dimensions- Length)	-	0	-
5.2.2.2( Squareness)	-	0	-
5.2.3 (Fragmentation Test- IS 17004)	-	0	-
5.2.4-a( Flatness-Overall bow-IS 17004)	-	0	-
5.2.4-b( Flatness-Roller wave distortion-IS 17005)	-	0	-
5.2.4-c( Flatness-Edge lift-IS 17006)	-	0	-
5.2.4-d( Flatness-Local distortion-IS 17007)	-	0	-
5.2.4.1 (Other distortions)	-	0	-
5.2.5.1( Resistance to shock- IS 17004)	-	0	-
5.2.5.2( Resistance to human impact- IS 17004)	-	0	-
5.2.6( Surface Compression (Optional)- IS 17004)	-	0	-
5.2.7( Mechanical Strength — Four Point Bending Test (Optional)- IS 17004)	-	0	-
5.2.8.1 & 5.2.8.3-Table 7(Diameter of Holes & Deviations on holes )	-	0	-
5.2.8.3-Table 8(Deviations on position of holes and Cutouts Location)	-	0	-
5.3.1 (Thickness-IS 17004 & IS 14900)	-	0	-
5.3.2.1( Dimensions and squareness- Width )	-	0	-
5.3.2.1( Dimensions and squareness- Length)	-	0	-
5.3.2.1( Dimensions and squareness-Squareness)	-	0	-
5.3.2.2 (Edge displacement)	-	0	-
5.3.3( Light Stability Test-IS 17004)	-	0	-
5.3.3( Light Stability Test-IS 17004)	-	0	-
5.3.4( Boil and Bake Tests-IS 17004)	-	0	-
5.3.5( Fracture and Adhesion Test-IS 17004)	-	0	-
5.3.6.1( Spot defects in the central area)	-	0	-
5.3.6.2 (Linear defects in the central area)	-	0	-
5.3.6.3( Defects in the outer area for framed edges)	-	0	-
5.3.6.4( Vents)	-	0	-
5.3.6.5( Creases and streaks)	-	0	-
5.3.6.6( Defects on edge which will not be framed)	-	0	-
5.3.7( Humidity Test – Optional)	-	0	-
5.3.8( Resistance to Human Impact Test)	-	0	-
4(Types)	-	0	-
5.1.1(General)	-	0	-
5.1.2(Optical Faults-IS 14900)	-	0	-
5.1.2(Spot Faults of category A/B/C/D -IS 14900)	-	0	-
5.1.2(Reams, Strings and Lines-IS 14900)	-	0	-
5.1.2(Linear / Extended Faults -IS 14900)	-	0	-
5.2.1 (Thickness -IS 17004 & IS 14900)	-	0	-
5.2.2.1( Dimensions- Width )	-	0	-
5.2.2.1( Dimensions- Length)	-	0	-
5.2.2.2( Squareness)	-	0	-
5.2.3 (Fragmentation Test- IS 17004)	-	0	-
5.2.4-a( Flatness-Overall bow-IS 17004)	-	0	-
5.2.4-b( Flatness-Roller wave distortion-IS 17005)	-	0	-
5.2.4-c( Flatness-Edge lift-IS 17006)	-	0	-
5.2.4-d( Flatness-Local distortion-IS 17007)	-	0	-
5.2.4.1 (Other distortions)	-	0	-
5.2.5.1( Resistance to shock- IS 17004)	-	0	-
5.2.5.2( Resistance to human impact- IS 17004)	-	0	-
5.2.6( Surface Compression (Optional)- IS 17004)	-	0	-
5.2.7( Mechanical Strength — Four Point Bending Test (Optional)- IS 17004)	-	0	-
5.2.8.1 & 5.2.8.3-Table 7(Diameter of Holes & Deviations on holes )	-	0	-
5.2.8.3-Table 8(Deviations on position of holes and Cutouts Location)	-	0	-
5.3.1 (Thickness-IS 17004 & IS 14900)	-	0	-
5.3.2.1( Dimensions and squareness- Width )	-	0	-
5.3.2.1( Dimensions and squareness- Length)	-	0	-
5.3.2.1( Dimensions and squareness-Squareness)	-	0	-
5.3.2.2 (Edge displacement)	-	0	-
5.3.3( Light Stability Test-IS 17004)	-	0	-
5.3.3( Light Stability Test-IS 17004)	-	0	-
5.3.4( Boil and Bake Tests-IS 17004)	-	0	-
5.3.5( Fracture and Adhesion Test-IS 17004)	-	0	-
5.3.6.1( Spot defects in the central area)	-	0	-
5.3.6.2 (Linear defects in the central area)	-	0	-
5.3.6.3( Defects in the outer area for framed edges)	-	0	-
5.3.6.4( Vents)	-	0	-
5.3.6.5( Creases and streaks)	-	0	-
5.3.6.6( Defects on edge which will not be framed)	-	0	-
5.3.7( Humidity Test – Optional)	-	0	-
5.3.8( Resistance to Human Impact Test)	-	0	-
5.2.1(Thickness)	-	0	-
5.2.2(Dimension and Squarenes)	-	0	-
5.2.4(Overall Bow)	-	0	-
5.2.4(Measurement of wave and roller wave)	-	0	-
5.2.4(Edge lift)	-	0	-
5.2.4(Local distortion)	-	0	-
5.2.3(Fragmentation test)	-	0	-
5.2.7(Four point bending)	-	0	-
5.2.6(Surface compression)	-	0	-
5.2.5.1(Resistance to shock)	-	0	-
5.2.5.2(Resistance to human impact)	-	0	-
5.3.1(Thickness test)	-	0	-
5.3.2.1(Dimension and Squarenes test)	-	0	-
5.3.6(Defects in central area test)	-	0	-
5.3.6.7(Defects in central area test)	-	0	-
5.3.5(Fracture and adhesion)	-	0	-
5.3.8(Resistance to human impact)	-	0	-
5.3.4(Boil test)	-	0	-
5.3.4(Bake test)	-	0	-
5.3.7(Humidity test with condensation)	-	0	-
5.3.7(Humidity test without condensation)	-	0	-
5.3.3(Light stability test)	-	0	-
5.3.2.2(Edge displacement test)	-	0	-
5.2.2(5.2.2 Dimension and Squarenes test)	-	0	-
5.2.4(measurement of wave and roller wave)	-	0	-
5.2.8(Fabrication in Glass)	-	0	-
Cl. No. 5.2.2.3.1, Table No. 1A(Shape accuracy, girth and length)	-	0	-
Cl. No. 5.2.2.3.2(Edge straightness deviation)	-	0	-
Cl. No. 5.2.2.3.3(Maximum cross-curve deviation)	-	0	-
As per Clause 5.3.9(Laminated Glass)	-	0	-
As per Clause 5.2.8.2(Toughened)	-	0	-
As per Clause 5.2.8.4(Toughened)	-	0	-
As per Clause 5.2.9(Toughened)	-	0	-
As per Clause 5.3.6.4(Laminated Glass)	-	0	-
As per Clause 5.3.6.5(Laminated Glass)	-	0	-
As per Clause 5.3.6.6(Laminated Glass)	-	0	-
As per Clause 5.5.2.1(Laminated Glass and Glass-Plastic Panes)	-	0	-
As per Clause 5.5.3.2(Laminated Glass and Glass-Plastic Panes)	-	0	-
As per Clause 5.6.2(Rigid Plastic Glazing)	-	0	-
As per Clause 5.7.1(Flexible Plastic)	-	0	-
As per Clause 3.7(Wind screen and Panes)	-	0	-
As per Clause 4.1(Wind screen and Panes)	-	0	-
4(Types)	-	0	-
5.1.1(General)	-	0	-
5.1.2(Optical Faults-IS 14900)	-	0	-
5.1.2(Spot Faults of category A/B/C/D -IS 14900)	-	0	-
5.1.2(Reams, Strings and Lines-IS 14900)	-	0	-
5.1.2(Linear / Extended Faults -IS 14900)	-	0	-
5.2.1 (Thickness -IS 17004 & IS 14900)	-	0	-
5.2.2.1( Dimensions- Width )	-	0	-
5.2.2.1( Dimensions- Length)	-	0	-
5.2.2.2( Squareness)	-	0	-
5.2.3 (Fragmentation Test- IS 17004)	-	0	-
5.2.4-a( Flatness-Overall bow-IS 17004)	-	0	-
5.2.4-b( Flatness-Roller wave distortion-IS 17005)	-	0	-
5.2.4-c( Flatness-Edge lift-IS 17006)	-	0	-
5.2.4-d( Flatness-Local distortion-IS 17007)	-	0	-
5.2.4.1 (Other distortions)	-	0	-
5.2.5.1( Resistance to shock- IS 17004)	-	0	-
5.2.5.2( Resistance to human impact- IS 17004)	-	0	-
5.2.6( Surface Compression (Optional)- IS 17004)	-	0	-
5.2.7( Mechanical Strength — Four Point Bending Test (Optional)- IS 17004)	-	0	-
5.2.8.1 & 5.2.8.3-Table 7(Diameter of Holes & Deviations on holes )	-	0	-
5.2.8.3-Table 8(Deviations on position of holes and Cutouts Location)	-	0	-
5.3.1 (Thickness-IS 17004 & IS 14900)	-	0	-
5.3.2.1( Dimensions and squareness- Width )	-	0	-
5.3.2.1( Dimensions and squareness- Length)	-	0	-
5.3.2.1( Dimensions and squareness-Squareness)	-	0	-
5.3.2.2 (Edge displacement)	-	0	-
5.3.3( Light Stability Test-IS 17004)	-	0	-
5.3.3( Light Stability Test-IS 17004)	-	0	-
5.3.4( Boil and Bake Tests-IS 17004)	-	0	-
5.3.5( Fracture and Adhesion Test-IS 17004)	-	0	-
5.3.6.1( Spot defects in the central area)	-	0	-
5.3.6.2 (Linear defects in the central area)	-	0	-
5.3.6.3( Defects in the outer area for framed edges)	-	0	-
5.3.6.4( Vents)	-	0	-
5.3.6.5( Creases and streaks)	-	0	-
5.3.6.6( Defects on edge which will not be framed)	-	0	-
5.3.7( Humidity Test – Optional)	-	0	-
5.3.8( Resistance to Human Impact Test)	-	0	-
4(Types)	-	0	-
5.1.1(General)	-	0	-
5.1.2(Optical Faults-IS 14900)	-	0	-
5.1.2(Spot Faults of category A/B/C/D -IS 14900)	-	0	-
5.1.2(Reams, Strings and Lines-IS 14900)	-	0	-
5.1.2(Linear / Extended Faults -IS 14900)	-	0	-
5.2.1 (Thickness -IS 17004 & IS 14900)	-	0	-
5.2.2.1( Dimensions- Width )	-	0	-
5.2.2.1( Dimensions- Length)	-	0	-
5.2.2.2( Squareness)	-	0	-
5.2.3 (Fragmentation Test- IS 17004)	-	0	-
5.2.4-a( Flatness-Overall bow-IS 17004)	-	0	-
5.2.4-b( Flatness-Roller wave distortion-IS 17005)	-	0	-
5.2.4-c( Flatness-Edge lift-IS 17006)	-	0	-
5.2.4-d( Flatness-Local distortion-IS 17007)	-	0	-
5.2.4.1 (Other distortions)	-	0	-
5.2.5.1( Resistance to shock- IS 17004)	-	0	-
5.2.5.2( Resistance to human impact- IS 17004)	-	0	-
5.2.6( Surface Compression (Optional)- IS 17004)	-	0	-
5.2.7( Mechanical Strength — Four Point Bending Test (Optional)- IS 17004)	-	0	-
5.2.8.1 & 5.2.8.3-Table 7(Diameter of Holes & Deviations on holes )	-	0	-
5.2.8.3-Table 8(Deviations on position of holes and Cutouts Location)	-	0	-
5.3.1 (Thickness-IS 17004 & IS 14900)	-	0	-
5.3.2.1( Dimensions and squareness- Width )	-	0	-
5.3.2.1( Dimensions and squareness- Length)	-	0	-
5.3.2.1( Dimensions and squareness-Squareness)	-	0	-
5.3.2.2 (Edge displacement)	-	0	-
5.3.3( Light Stability Test-IS 17004)	-	0	-
5.3.3( Light Stability Test-IS 17004)	-	0	-
5.3.4( Boil and Bake Tests-IS 17004)	-	0	-
5.3.5( Fracture and Adhesion Test-IS 17004)	-	0	-
5.3.6.1( Spot defects in the central area)	-	0	-
5.3.6.2 (Linear defects in the central area)	-	0	-
5.3.6.3( Defects in the outer area for framed edges)	-	0	-
5.3.6.4( Vents)	-	0	-
5.3.6.5( Creases and streaks)	-	0	-
5.3.6.6( Defects on edge which will not be framed)	-	0	-
5.3.7( Humidity Test – Optional)	-	0	-
5.3.8( Resistance to Human Impact Test)	-	0	-
5.2.1(Thickness)	-	0	-
5.2.2(Dimension and Squarenes)	-	0	-
5.2.4(Overall Bow)	-	0	-
5.2.4(Measurement of wave and roller wave)	-	0	-
5.2.4(Edge lift)	-	0	-
5.2.4(Local distortion)	-	0	-
5.2.3(Fragmentation test)	-	0	-
5.2.7(Four point bending)	-	0	-
5.2.6(Surface compression)	-	0	-
5.2.5.1(Resistance to shock)	-	0	-
5.2.5.2(Resistance to human impact)	-	0	-
5.3.1(Thickness test)	-	0	-
5.3.2.1(Dimension and Squarenes test)	-	0	-
5.3.6(Defects in central area test)	-	0	-
5.3.6.7(Defects in central area test)	-	0	-
5.3.5(Fracture and adhesion)	-	0	-
5.3.8(Resistance to human impact)	-	0	-
5.3.4(Boil test)	-	0	-
5.3.4(Bake test)	-	0	-
5.3.7(Humidity test with condensation)	-	0	-
5.3.7(Humidity test without condensation)	-	0	-
5.3.3(Light stability test)	-	0	-
5.3.2.2(Edge displacement test)	-	0	-
5.2.2(5.2.2 Dimension and Squarenes test)	-	0	-
5.2.4(measurement of wave and roller wave)	-	0	-
5.2.8(Fabrication in Glass)	-	0	-
Cl. No. 5.2.2.3.1, Table No. 1A(Shape accuracy, girth and length)	-	0	-
Cl. No. 5.2.2.3.2(Edge straightness deviation)	-	0	-
Cl. No. 5.2.2.3.3(Maximum cross-curve deviation)	-	0	-
As per Clause 5.3.9(Laminated Glass)	-	0	-
As per Clause 5.2.8.2(Toughened)	-	0	-
As per Clause 5.2.8.4(Toughened)	-	0	-
As per Clause 5.2.9(Toughened)	-	0	-
As per Clause 5.3.6.4(Laminated Glass)	-	0	-
As per Clause 5.3.6.5(Laminated Glass)	-	0	-
As per Clause 5.3.6.6(Laminated Glass)	-	0	-
As per Clause 5.5.2.1(Laminated Glass and Glass-Plastic Panes)	-	0	-
As per Clause 5.5.3.2(Laminated Glass and Glass-Plastic Panes)	-	0	-
As per Clause 5.6.2(Rigid Plastic Glazing)	-	0	-
As per Clause 5.7.1(Flexible Plastic)	-	0	-
As per Clause 3.7(Wind screen and Panes)	-	0	-
As per Clause 4.1(Wind screen and Panes)	-	0	-
4(Types)	-	0	-
5.1.1(General)	-	0	-
5.1.2(Optical Faults-IS 14900)	-	0	-
5.1.2(Spot Faults of category A/B/C/D -IS 14900)	-	0	-
5.1.2(Reams, Strings and Lines-IS 14900)	-	0	-
5.1.2(Linear / Extended Faults -IS 14900)	-	0	-
5.2.1 (Thickness -IS 17004 & IS 14900)	-	0	-
5.2.2.1( Dimensions- Width )	-	0	-
5.2.2.1( Dimensions- Length)	-	0	-
5.2.2.2( Squareness)	-	0	-
5.2.3 (Fragmentation Test- IS 17004)	-	0	-
5.2.4-a( Flatness-Overall bow-IS 17004)	-	0	-
5.2.4-b( Flatness-Roller wave distortion-IS 17005)	-	0	-
5.2.4-c( Flatness-Edge lift-IS 17006)	-	0	-
5.2.4-d( Flatness-Local distortion-IS 17007)	-	0	-
5.2.4.1 (Other distortions)	-	0	-
5.2.5.1( Resistance to shock- IS 17004)	-	0	-
5.2.5.2( Resistance to human impact- IS 17004)	-	0	-
5.2.6( Surface Compression (Optional)- IS 17004)	-	0	-
5.2.7( Mechanical Strength — Four Point Bending Test (Optional)- IS 17004)	-	0	-
5.2.8.1 & 5.2.8.3-Table 7(Diameter of Holes & Deviations on holes )	-	0	-
5.2.8.3-Table 8(Deviations on position of holes and Cutouts Location)	-	0	-
5.3.1 (Thickness-IS 17004 & IS 14900)	-	0	-
5.3.2.1( Dimensions and squareness- Width )	-	0	-
5.3.2.1( Dimensions and squareness- Length)	-	0	-
5.3.2.1( Dimensions and squareness-Squareness)	-	0	-
5.3.2.2 (Edge displacement)	-	0	-
5.3.3( Light Stability Test-IS 17004)	-	0	-
5.3.3( Light Stability Test-IS 17004)	-	0	-
5.3.4( Boil and Bake Tests-IS 17004)	-	0	-
5.3.5( Fracture and Adhesion Test-IS 17004)	-	0	-
5.3.6.1( Spot defects in the central area)	-	0	-
5.3.6.2 (Linear defects in the central area)	-	0	-
5.3.6.3( Defects in the outer area for framed edges)	-	0	-
5.3.6.4( Vents)	-	0	-
5.3.6.5( Creases and streaks)	-	0	-
5.3.6.6( Defects on edge which will not be framed)	-	0	-
5.3.7( Humidity Test – Optional)	-	0	-
5.3.8( Resistance to Human Impact Test)	-	0	-
4(Types)	-	0	-
5.1.1(General)	-	0	-
5.1.2(Optical Faults-IS 14900)	-	0	-
5.1.2(Spot Faults of category A/B/C/D -IS 14900)	-	0	-
5.1.2(Reams, Strings and Lines-IS 14900)	-	0	-
5.1.2(Linear / Extended Faults -IS 14900)	-	0	-
5.2.1 (Thickness -IS 17004 & IS 14900)	-	0	-
5.2.2.1( Dimensions- Width )	-	0	-
5.2.2.1( Dimensions- Length)	-	0	-
5.2.2.2( Squareness)	-	0	-
5.2.3 (Fragmentation Test- IS 17004)	-	0	-
5.2.4-a( Flatness-Overall bow-IS 17004)	-	0	-
5.2.4-b( Flatness-Roller wave distortion-IS 17005)	-	0	-
5.2.4-c( Flatness-Edge lift-IS 17006)	-	0	-
5.2.4-d( Flatness-Local distortion-IS 17007)	-	0	-
5.2.4.1 (Other distortions)	-	0	-
5.2.5.1( Resistance to shock- IS 17004)	-	0	-
5.2.5.2( Resistance to human impact- IS 17004)	-	0	-
5.2.6( Surface Compression (Optional)- IS 17004)	-	0	-
5.2.7( Mechanical Strength — Four Point Bending Test (Optional)- IS 17004)	-	0	-
5.2.8.1 & 5.2.8.3-Table 7(Diameter of Holes & Deviations on holes )	-	0	-
5.2.8.3-Table 8(Deviations on position of holes and Cutouts Location)	-	0	-
5.3.1 (Thickness-IS 17004 & IS 14900)	-	0	-
5.3.2.1( Dimensions and squareness- Width )	-	0	-
5.3.2.1( Dimensions and squareness- Length)	-	0	-
5.3.2.1( Dimensions and squareness-Squareness)	-	0	-
5.3.2.2 (Edge displacement)	-	0	-
5.3.3( Light Stability Test-IS 17004)	-	0	-
5.3.3( Light Stability Test-IS 17004)	-	0	-
5.3.4( Boil and Bake Tests-IS 17004)	-	0	-
5.3.5( Fracture and Adhesion Test-IS 17004)	-	0	-
5.3.6.1( Spot defects in the central area)	-	0	-
5.3.6.2 (Linear defects in the central area)	-	0	-
5.3.6.3( Defects in the outer area for framed edges)	-	0	-
5.3.6.4( Vents)	-	0	-
5.3.6.5( Creases and streaks)	-	0	-
5.3.6.6( Defects on edge which will not be framed)	-	0	-
5.3.7( Humidity Test – Optional)	-	0	-
5.3.8( Resistance to Human Impact Test)	-	0	-
5.2.1(Thickness)	-	0	-
5.2.2(Dimension and Squarenes)	-	0	-
5.2.4(Overall Bow)	-	0	-
5.2.4(Measurement of wave and roller wave)	-	0	-
5.2.4(Edge lift)	-	0	-
5.2.4(Local distortion)	-	0	-
5.2.3(Fragmentation test)	-	0	-
5.2.7(Four point bending)	-	0	-
5.2.6(Surface compression)	-	0	-
5.2.5.1(Resistance to shock)	-	0	-
5.2.5.2(Resistance to human impact)	-	0	-
5.3.1(Thickness test)	-	0	-
5.3.2.1(Dimension and Squarenes test)	-	0	-
5.3.6(Defects in central area test)	-	0	-
5.3.6.7(Defects in central area test)	-	0	-
5.3.5(Fracture and adhesion)	-	0	-
5.3.8(Resistance to human impact)	-	0	-
5.3.4(Boil test)	-	0	-
5.3.4(Bake test)	-	0	-
5.3.7(Humidity test with condensation)	-	0	-
5.3.7(Humidity test without condensation)	-	0	-
5.3.3(Light stability test)	-	0	-
5.3.2.2(Edge displacement test)	-	0	-
5.2.2(5.2.2 Dimension and Squarenes test)	-	0	-
5.2.4(measurement of wave and roller wave)	-	0	-
5.2.8(Fabrication in Glass)	-	0	-
Cl. No. 5.2.2.3.1, Table No. 1A(Shape accuracy, girth and length)	-	0	-
Cl. No. 5.2.2.3.2(Edge straightness deviation)	-	0	-
Cl. No. 5.2.2.3.3(Maximum cross-curve deviation)	-	0	-
As per Clause 5.3.9(Laminated Glass)	-	0	-
As per Clause 5.2.8.2(Toughened)	-	0	-
As per Clause 5.2.8.4(Toughened)	-	0	-
As per Clause 5.2.9(Toughened)	-	0	-
As per Clause 5.3.6.4(Laminated Glass)	-	0	-
As per Clause 5.3.6.5(Laminated Glass)	-	0	-
As per Clause 5.3.6.6(Laminated Glass)	-	0	-
As per Clause 5.5.2.1(Laminated Glass and Glass-Plastic Panes)	-	0	-
As per Clause 5.5.3.2(Laminated Glass and Glass-Plastic Panes)	-	0	-
As per Clause 5.6.2(Rigid Plastic Glazing)	-	0	-
As per Clause 5.7.1(Flexible Plastic)	-	0	-
As per Clause 3.7(Wind screen and Panes)	-	0	-
As per Clause 4.1(Wind screen and Panes)	-	0	-

22 May, 2029

-
Included w.e.f. 06.09.2024

IS 9283 (2013)

Motors for submersible pumpsets - Specification (Second Revision)

9700 View breakup
For Type Tests : upto 3.7 kW : Rs. 9,700 , 3.7 kW to 7.5 kW : Rs. 10,000, 7.5 kW to 11 kW : Rs. 11,000, 11 kW to 15 kW : Rs. 13,500, 15 kW to 20 kW : Rs. 15,700, 20 kW to 45 kW : Rs. 19,500

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(Construction, IS 9283)	-	500	For Type Tests : upto 3.7 kW : Rs. 9,700 , 3.7 kW to 7.5 kW : Rs. 10,000, 7.5 kW to 11 kW : Rs. 11,000, 11 kW to 15 kW : Rs. 13,500, 15 kW to 20 kW : Rs. 15,700, 20 kW to 45 kW : Rs. 19,500,
5.1.1(Construction, IS 9283)	-	500	For Type Tests : upto 3.7 kW : Rs. 9,700 , 3.7 kW to 7.5 kW : Rs. 10,000, 7.5 kW to 11 kW : Rs. 11,000, 11 kW to 15 kW : Rs. 13,500, 15 kW to 20 kW : Rs. 15,700, 20 kW to 45 kW : Rs. 19,500,
5.1.2(Construction, IS 9283)	-	500	For Type Tests : upto 3.7 kW : Rs. 9,700 , 3.7 kW to 7.5 kW : Rs. 10,000, 7.5 kW to 11 kW : Rs. 11,000, 11 kW to 15 kW : Rs. 13,500, 15 kW to 20 kW : Rs. 15,700, 20 kW to 45 kW : Rs. 19,500,
5.1.4(Construction, IS 9283)	-	500	For Type Tests : upto 3.7 kW : Rs. 9,700 , 3.7 kW to 7.5 kW : Rs. 10,000, 7.5 kW to 11 kW : Rs. 11,000, 11 kW to 15 kW : Rs. 13,500, 15 kW to 20 kW : Rs. 15,700, 20 kW to 45 kW : Rs. 19,500,
5.2.1(Earthing, IS 9283)	-	500	For Type Tests : upto 3.7 kW : Rs. 9,700 , 3.7 kW to 7.5 kW : Rs. 10,000, 7.5 kW to 11 kW : Rs. 11,000, 11 kW to 15 kW : Rs. 13,500, 15 kW to 20 kW : Rs. 15,700, 20 kW to 45 kW : Rs. 19,500,
5.2.2(Earthing, IS 9283)	-	500	For Type Tests : upto 3.7 kW : Rs. 9,700 , 3.7 kW to 7.5 kW : Rs. 10,000, 7.5 kW to 11 kW : Rs. 11,000, 11 kW to 15 kW : Rs. 13,500, 15 kW to 20 kW : Rs. 15,700, 20 kW to 45 kW : Rs. 19,500,
5.2.3(Earthing, IS 9283)	-	500	For Type Tests : upto 3.7 kW : Rs. 9,700 , 3.7 kW to 7.5 kW : Rs. 10,000, 7.5 kW to 11 kW : Rs. 11,000, 11 kW to 15 kW : Rs. 13,500, 15 kW to 20 kW : Rs. 15,700, 20 kW to 45 kW : Rs. 19,500,
5.2.4(Earthing, IS 9283)	-	500	For Type Tests : upto 3.7 kW : Rs. 9,700 , 3.7 kW to 7.5 kW : Rs. 10,000, 7.5 kW to 11 kW : Rs. 11,000, 11 kW to 15 kW : Rs. 13,500, 15 kW to 20 kW : Rs. 15,700, 20 kW to 45 kW : Rs. 19,500,
5.2.5(Earthing, IS 9283)	-	500	For Type Tests : upto 3.7 kW : Rs. 9,700 , 3.7 kW to 7.5 kW : Rs. 10,000, 7.5 kW to 11 kW : Rs. 11,000, 11 kW to 15 kW : Rs. 13,500, 15 kW to 20 kW : Rs. 15,700, 20 kW to 45 kW : Rs. 19,500,
5.3(Foreign Matter, IS 9283)	-	500	For Type Tests : upto 3.7 kW : Rs. 9,700 , 3.7 kW to 7.5 kW : Rs. 10,000, 7.5 kW to 11 kW : Rs. 11,000, 11 kW to 15 kW : Rs. 13,500, 15 kW to 20 kW : Rs. 15,700, 20 kW to 45 kW : Rs. 19,500,
5.5(Finish of Bearings, IS 9283)	-	500	For Type Tests : upto 3.7 kW : Rs. 9,700 , 3.7 kW to 7.5 kW : Rs. 10,000, 7.5 kW to 11 kW : Rs. 11,000, 11 kW to 15 kW : Rs. 13,500, 15 kW to 20 kW : Rs. 15,700, 20 kW to 45 kW : Rs. 19,500,
5.6(Balancing of Rotor, IS 9283)	-	2500	For Type Tests : upto 3.7 kW : Rs. 9,700 , 3.7 kW to 7.5 kW : Rs. 10,000, 7.5 kW to 11 kW : Rs. 11,000, 11 kW to 15 kW : Rs. 13,500, 15 kW to 20 kW : Rs. 15,700, 20 kW to 45 kW : Rs. 19,500,
7.1(Dimensions of Motors, IS 9283)	-	1000	For Type Tests : upto 3.7 kW : Rs. 9,700 , 3.7 kW to 7.5 kW : Rs. 10,000, 7.5 kW to 11 kW : Rs. 11,000, 11 kW to 15 kW : Rs. 13,500, 15 kW to 20 kW : Rs. 15,700, 20 kW to 45 kW : Rs. 19,500,
7.2.1(Tolerances, IS 9283)	-	1000	For Type Tests : upto 3.7 kW : Rs. 9,700 , 3.7 kW to 7.5 kW : Rs. 10,000, 7.5 kW to 11 kW : Rs. 11,000, 11 kW to 15 kW : Rs. 13,500, 15 kW to 20 kW : Rs. 15,700, 20 kW to 45 kW : Rs. 19,500,
7.2.2(Tolerances, IS 9283)	-	1000	For Type Tests : upto 3.7 kW : Rs. 9,700 , 3.7 kW to 7.5 kW : Rs. 10,000, 7.5 kW to 11 kW : Rs. 11,000, 11 kW to 15 kW : Rs. 13,500, 15 kW to 20 kW : Rs. 15,700, 20 kW to 45 kW : Rs. 19,500,
8(Type of duty, IS 9283)	-	500	For Type Tests : upto 3.7 kW : Rs. 9,700 , 3.7 kW to 7.5 kW : Rs. 10,000, 7.5 kW to 11 kW : Rs. 11,000, 11 kW to 15 kW : Rs. 13,500, 15 kW to 20 kW : Rs. 15,700, 20 kW to 45 kW : Rs. 19,500,
13(Terminal Markings, IS 9283)	-	500	For Type Tests : upto 3.7 kW : Rs. 9,700 , 3.7 kW to 7.5 kW : Rs. 10,000, 7.5 kW to 11 kW : Rs. 11,000, 11 kW to 15 kW : Rs. 13,500, 15 kW to 20 kW : Rs. 15,700, 20 kW to 45 kW : Rs. 19,500,
15.1(Marking, IS 9283)	-	500	For Type Tests : upto 3.7 kW : Rs. 9,700 , 3.7 kW to 7.5 kW : Rs. 10,000, 7.5 kW to 11 kW : Rs. 11,000, 11 kW to 15 kW : Rs. 13,500, 15 kW to 20 kW : Rs. 15,700, 20 kW to 45 kW : Rs. 19,500,
17.1(Performance values, IS 9283)	-	2500	For Type Tests : upto 3.7 kW : Rs. 9,700 , 3.7 kW to 7.5 kW : Rs. 10,000, 7.5 kW to 11 kW : Rs. 11,000, 11 kW to 15 kW : Rs. 13,500, 15 kW to 20 kW : Rs. 15,700, 20 kW to 45 kW : Rs. 19,500,
17.1(Performance values, IS 9283)	-	2500	For Type Tests : upto 3.7 kW : Rs. 9,700 , 3.7 kW to 7.5 kW : Rs. 10,000, 7.5 kW to 11 kW : Rs. 11,000, 11 kW to 15 kW : Rs. 13,500, 15 kW to 20 kW : Rs. 15,700, 20 kW to 45 kW : Rs. 19,500,
17.1(Performance values, IS 9283)	-	2500	For Type Tests : upto 3.7 kW : Rs. 9,700 , 3.7 kW to 7.5 kW : Rs. 10,000, 7.5 kW to 11 kW : Rs. 11,000, 11 kW to 15 kW : Rs. 13,500, 15 kW to 20 kW : Rs. 15,700, 20 kW to 45 kW : Rs. 19,500,
17.1(Performance values, IS 9283)	-	2500	For Type Tests : upto 3.7 kW : Rs. 9,700 , 3.7 kW to 7.5 kW : Rs. 10,000, 7.5 kW to 11 kW : Rs. 11,000, 11 kW to 15 kW : Rs. 13,500, 15 kW to 20 kW : Rs. 15,700, 20 kW to 45 kW : Rs. 19,500,
18.1(Overload test, IS 9283)	-	1000	For Type Tests : upto 3.7 kW : Rs. 9,700 , 3.7 kW to 7.5 kW : Rs. 10,000, 7.5 kW to 11 kW : Rs. 11,000, 11 kW to 15 kW : Rs. 13,500, 15 kW to 20 kW : Rs. 15,700, 20 kW to 45 kW : Rs. 19,500,
19(Temperature rise test, IS 9283)	-	1500	For Type Tests : upto 3.7 kW : Rs. 9,700 , 3.7 kW to 7.5 kW : Rs. 10,000, 7.5 kW to 11 kW : Rs. 11,000, 11 kW to 15 kW : Rs. 13,500, 15 kW to 20 kW : Rs. 15,700, 20 kW to 45 kW : Rs. 19,500,
19(Temperature rise test, IS 9283)	-	1500	For Type Tests : upto 3.7 kW : Rs. 9,700 , 3.7 kW to 7.5 kW : Rs. 10,000, 7.5 kW to 11 kW : Rs. 11,000, 11 kW to 15 kW : Rs. 13,500, 15 kW to 20 kW : Rs. 15,700, 20 kW to 45 kW : Rs. 19,500,
20(High Voltage test, IS 9283)	-	1000	For Type Tests : upto 3.7 kW : Rs. 9,700 , 3.7 kW to 7.5 kW : Rs. 10,000, 7.5 kW to 11 kW : Rs. 11,000, 11 kW to 15 kW : Rs. 13,500, 15 kW to 20 kW : Rs. 15,700, 20 kW to 45 kW : Rs. 19,500,
21(Insulation Resistance test, IS 9283)	-	1000	For Type Tests : upto 3.7 kW : Rs. 9,700 , 3.7 kW to 7.5 kW : Rs. 10,000, 7.5 kW to 11 kW : Rs. 11,000, 11 kW to 15 kW : Rs. 13,500, 15 kW to 20 kW : Rs. 15,700, 20 kW to 45 kW : Rs. 19,500,
22(Speed, IS 9283)	-	1000	For Type Tests : upto 3.7 kW : Rs. 9,700 , 3.7 kW to 7.5 kW : Rs. 10,000, 7.5 kW to 11 kW : Rs. 11,000, 11 kW to 15 kW : Rs. 13,500, 15 kW to 20 kW : Rs. 15,700, 20 kW to 45 kW : Rs. 19,500,
23(Leakage Current test, IS 9283)	-	1000	For Type Tests : upto 3.7 kW : Rs. 9,700 , 3.7 kW to 7.5 kW : Rs. 10,000, 7.5 kW to 11 kW : Rs. 11,000, 11 kW to 15 kW : Rs. 13,500, 15 kW to 20 kW : Rs. 15,700, 20 kW to 45 kW : Rs. 19,500,
16.1(c)(Measurement of Stator Resistance)	-	1000	For Type Tests : upto 3.7 kW : Rs. 9,700 , 3.7 kW to 7.5 kW : Rs. 10,000, 7.5 kW to 11 kW : Rs. 11,000, 11 kW to 15 kW : Rs. 13,500, 15 kW to 20 kW : Rs. 15,700, 20 kW to 45 kW : Rs. 19,500,
16.1(d)(No Load Test)	-	2500	For Type Tests : upto 3.7 kW : Rs. 9,700 , 3.7 kW to 7.5 kW : Rs. 10,000, 7.5 kW to 11 kW : Rs. 11,000, 11 kW to 15 kW : Rs. 13,500, 15 kW to 20 kW : Rs. 15,700, 20 kW to 45 kW : Rs. 19,500,
16.1(e)(Reduced Voltage running up Test)	-	1000	For Type Tests : upto 3.7 kW : Rs. 9,700 , 3.7 kW to 7.5 kW : Rs. 10,000, 7.5 kW to 11 kW : Rs. 11,000, 11 kW to 15 kW : Rs. 13,500, 15 kW to 20 kW : Rs. 15,700, 20 kW to 45 kW : Rs. 19,500,
16.1(f)(Locked Rotor test)	-	1000	For Type Tests : upto 3.7 kW : Rs. 9,700 , 3.7 kW to 7.5 kW : Rs. 10,000, 7.5 kW to 11 kW : Rs. 11,000, 11 kW to 15 kW : Rs. 13,500, 15 kW to 20 kW : Rs. 15,700, 20 kW to 45 kW : Rs. 19,500,
16.1(g)(Full Load Test)	-	1000	For Type Tests : upto 3.7 kW : Rs. 9,700 , 3.7 kW to 7.5 kW : Rs. 10,000, 7.5 kW to 11 kW : Rs. 11,000, 11 kW to 15 kW : Rs. 13,500, 15 kW to 20 kW : Rs. 15,700, 20 kW to 45 kW : Rs. 19,500,
16.1m(Momentary over-load test)	-	1000	For Type Tests : upto 3.7 kW : Rs. 9,700 , 3.7 kW to 7.5 kW : Rs. 10,000, 7.5 kW to 11 kW : Rs. 11,000, 11 kW to 15 kW : Rs. 13,500, 15 kW to 20 kW : Rs. 15,700, 20 kW to 45 kW : Rs. 19,500,
16.1 (h)(Performance Characteristics)	-	1000	For Type Tests : upto 3.7 kW : Rs. 9,700 , 3.7 kW to 7.5 kW : Rs. 10,000, 7.5 kW to 11 kW : Rs. 11,000, 11 kW to 15 kW : Rs. 13,500, 15 kW to 20 kW : Rs. 15,700, 20 kW to 45 kW : Rs. 19,500,
16.2 ( a)(Insulation Resistance)	-	1000	For Type Tests : upto 3.7 kW : Rs. 9,700 , 3.7 kW to 7.5 kW : Rs. 10,000, 7.5 kW to 11 kW : Rs. 11,000, 11 kW to 15 kW : Rs. 13,500, 15 kW to 20 kW : Rs. 15,700, 20 kW to 45 kW : Rs. 19,500,
16.2 ( b)(Voltage, Time)	-	1000	For Type Tests : upto 3.7 kW : Rs. 9,700 , 3.7 kW to 7.5 kW : Rs. 10,000, 7.5 kW to 11 kW : Rs. 11,000, 11 kW to 15 kW : Rs. 13,500, 15 kW to 20 kW : Rs. 15,700, 20 kW to 45 kW : Rs. 19,500,
16.2 (c)(Voltage, Current, Power, Frequency, Speed)	-	1000	For Type Tests : upto 3.7 kW : Rs. 9,700 , 3.7 kW to 7.5 kW : Rs. 10,000, 7.5 kW to 11 kW : Rs. 11,000, 11 kW to 15 kW : Rs. 13,500, 15 kW to 20 kW : Rs. 15,700, 20 kW to 45 kW : Rs. 19,500,
16.2 (d)(Voltgae, Current, Power, Torque)	-	1000	For Type Tests : upto 3.7 kW : Rs. 9,700 , 3.7 kW to 7.5 kW : Rs. 10,000, 7.5 kW to 11 kW : Rs. 11,000, 11 kW to 15 kW : Rs. 13,500, 15 kW to 20 kW : Rs. 15,700, 20 kW to 45 kW : Rs. 19,500,
16.2 (e)(Voltage, Frequency, Speed)	-	1000	For Type Tests : upto 3.7 kW : Rs. 9,700 , 3.7 kW to 7.5 kW : Rs. 10,000, 7.5 kW to 11 kW : Rs. 11,000, 11 kW to 15 kW : Rs. 13,500, 15 kW to 20 kW : Rs. 15,700, 20 kW to 45 kW : Rs. 19,500,
5.1(Construction, IS 9283)	-	0	For Type Tests : upto 3.7 kW : Rs. 9,700 , 3.7 kW to 7.5 kW : Rs. 10,000, 7.5 kW to 11 kW : Rs. 11,000, 11 kW to 15 kW : Rs. 13,500, 15 kW to 20 kW : Rs. 15,700, 20 kW to 45 kW : Rs. 19,500,
5.1.1(Construction, IS 9283)	-	0	For Type Tests : upto 3.7 kW : Rs. 9,700 , 3.7 kW to 7.5 kW : Rs. 10,000, 7.5 kW to 11 kW : Rs. 11,000, 11 kW to 15 kW : Rs. 13,500, 15 kW to 20 kW : Rs. 15,700, 20 kW to 45 kW : Rs. 19,500,
5.1.2(Construction, IS 9283)	-	0	For Type Tests : upto 3.7 kW : Rs. 9,700 , 3.7 kW to 7.5 kW : Rs. 10,000, 7.5 kW to 11 kW : Rs. 11,000, 11 kW to 15 kW : Rs. 13,500, 15 kW to 20 kW : Rs. 15,700, 20 kW to 45 kW : Rs. 19,500,
5.1.4(Construction, IS 9283)	-	0	For Type Tests : upto 3.7 kW : Rs. 9,700 , 3.7 kW to 7.5 kW : Rs. 10,000, 7.5 kW to 11 kW : Rs. 11,000, 11 kW to 15 kW : Rs. 13,500, 15 kW to 20 kW : Rs. 15,700, 20 kW to 45 kW : Rs. 19,500,
5.2.1(Earthing, IS 9283)	-	0	For Type Tests : upto 3.7 kW : Rs. 9,700 , 3.7 kW to 7.5 kW : Rs. 10,000, 7.5 kW to 11 kW : Rs. 11,000, 11 kW to 15 kW : Rs. 13,500, 15 kW to 20 kW : Rs. 15,700, 20 kW to 45 kW : Rs. 19,500,
5.2.2(Earthing, IS 9283)	-	0	For Type Tests : upto 3.7 kW : Rs. 9,700 , 3.7 kW to 7.5 kW : Rs. 10,000, 7.5 kW to 11 kW : Rs. 11,000, 11 kW to 15 kW : Rs. 13,500, 15 kW to 20 kW : Rs. 15,700, 20 kW to 45 kW : Rs. 19,500,
5.2.3(Earthing, IS 9283)	-	0	For Type Tests : upto 3.7 kW : Rs. 9,700 , 3.7 kW to 7.5 kW : Rs. 10,000, 7.5 kW to 11 kW : Rs. 11,000, 11 kW to 15 kW : Rs. 13,500, 15 kW to 20 kW : Rs. 15,700, 20 kW to 45 kW : Rs. 19,500,
5.2.4(Earthing, IS 9283)	-	0	For Type Tests : upto 3.7 kW : Rs. 9,700 , 3.7 kW to 7.5 kW : Rs. 10,000, 7.5 kW to 11 kW : Rs. 11,000, 11 kW to 15 kW : Rs. 13,500, 15 kW to 20 kW : Rs. 15,700, 20 kW to 45 kW : Rs. 19,500,
5.2.5(Earthing, IS 9283)	-	0	For Type Tests : upto 3.7 kW : Rs. 9,700 , 3.7 kW to 7.5 kW : Rs. 10,000, 7.5 kW to 11 kW : Rs. 11,000, 11 kW to 15 kW : Rs. 13,500, 15 kW to 20 kW : Rs. 15,700, 20 kW to 45 kW : Rs. 19,500,
5.3(Foreign Matter, IS 9283)	-	0	For Type Tests : upto 3.7 kW : Rs. 9,700 , 3.7 kW to 7.5 kW : Rs. 10,000, 7.5 kW to 11 kW : Rs. 11,000, 11 kW to 15 kW : Rs. 13,500, 15 kW to 20 kW : Rs. 15,700, 20 kW to 45 kW : Rs. 19,500,
5.5(Finish of Bearings, IS 9283)	-	0	For Type Tests : upto 3.7 kW : Rs. 9,700 , 3.7 kW to 7.5 kW : Rs. 10,000, 7.5 kW to 11 kW : Rs. 11,000, 11 kW to 15 kW : Rs. 13,500, 15 kW to 20 kW : Rs. 15,700, 20 kW to 45 kW : Rs. 19,500,
5.6(Balancing of Rotor, IS 9283)	-	0	For Type Tests : upto 3.7 kW : Rs. 9,700 , 3.7 kW to 7.5 kW : Rs. 10,000, 7.5 kW to 11 kW : Rs. 11,000, 11 kW to 15 kW : Rs. 13,500, 15 kW to 20 kW : Rs. 15,700, 20 kW to 45 kW : Rs. 19,500,
7.1(Dimensions of Motors, IS 9283)	-	0	For Type Tests : upto 3.7 kW : Rs. 9,700 , 3.7 kW to 7.5 kW : Rs. 10,000, 7.5 kW to 11 kW : Rs. 11,000, 11 kW to 15 kW : Rs. 13,500, 15 kW to 20 kW : Rs. 15,700, 20 kW to 45 kW : Rs. 19,500,
7.2.1(Tolerances, IS 9283)	-	0	For Type Tests : upto 3.7 kW : Rs. 9,700 , 3.7 kW to 7.5 kW : Rs. 10,000, 7.5 kW to 11 kW : Rs. 11,000, 11 kW to 15 kW : Rs. 13,500, 15 kW to 20 kW : Rs. 15,700, 20 kW to 45 kW : Rs. 19,500,
7.2.2(Tolerances, IS 9283)	-	0	For Type Tests : upto 3.7 kW : Rs. 9,700 , 3.7 kW to 7.5 kW : Rs. 10,000, 7.5 kW to 11 kW : Rs. 11,000, 11 kW to 15 kW : Rs. 13,500, 15 kW to 20 kW : Rs. 15,700, 20 kW to 45 kW : Rs. 19,500,
8(Type of duty, IS 9283)	-	0	For Type Tests : upto 3.7 kW : Rs. 9,700 , 3.7 kW to 7.5 kW : Rs. 10,000, 7.5 kW to 11 kW : Rs. 11,000, 11 kW to 15 kW : Rs. 13,500, 15 kW to 20 kW : Rs. 15,700, 20 kW to 45 kW : Rs. 19,500,
13(Terminal Markings, IS 9283)	-	0	For Type Tests : upto 3.7 kW : Rs. 9,700 , 3.7 kW to 7.5 kW : Rs. 10,000, 7.5 kW to 11 kW : Rs. 11,000, 11 kW to 15 kW : Rs. 13,500, 15 kW to 20 kW : Rs. 15,700, 20 kW to 45 kW : Rs. 19,500,
15.1(Marking, IS 9283)	-	0	For Type Tests : upto 3.7 kW : Rs. 9,700 , 3.7 kW to 7.5 kW : Rs. 10,000, 7.5 kW to 11 kW : Rs. 11,000, 11 kW to 15 kW : Rs. 13,500, 15 kW to 20 kW : Rs. 15,700, 20 kW to 45 kW : Rs. 19,500,
17.1(Performance values, IS 9283)	-	0	For Type Tests : upto 3.7 kW : Rs. 9,700 , 3.7 kW to 7.5 kW : Rs. 10,000, 7.5 kW to 11 kW : Rs. 11,000, 11 kW to 15 kW : Rs. 13,500, 15 kW to 20 kW : Rs. 15,700, 20 kW to 45 kW : Rs. 19,500,
17.1(Performance values, IS 9283)	-	0	For Type Tests : upto 3.7 kW : Rs. 9,700 , 3.7 kW to 7.5 kW : Rs. 10,000, 7.5 kW to 11 kW : Rs. 11,000, 11 kW to 15 kW : Rs. 13,500, 15 kW to 20 kW : Rs. 15,700, 20 kW to 45 kW : Rs. 19,500,
17.1(Performance values, IS 9283)	-	0	For Type Tests : upto 3.7 kW : Rs. 9,700 , 3.7 kW to 7.5 kW : Rs. 10,000, 7.5 kW to 11 kW : Rs. 11,000, 11 kW to 15 kW : Rs. 13,500, 15 kW to 20 kW : Rs. 15,700, 20 kW to 45 kW : Rs. 19,500,
17.1(Performance values, IS 9283)	-	0	For Type Tests : upto 3.7 kW : Rs. 9,700 , 3.7 kW to 7.5 kW : Rs. 10,000, 7.5 kW to 11 kW : Rs. 11,000, 11 kW to 15 kW : Rs. 13,500, 15 kW to 20 kW : Rs. 15,700, 20 kW to 45 kW : Rs. 19,500,
18.1(Overload test, IS 9283)	-	0	For Type Tests : upto 3.7 kW : Rs. 9,700 , 3.7 kW to 7.5 kW : Rs. 10,000, 7.5 kW to 11 kW : Rs. 11,000, 11 kW to 15 kW : Rs. 13,500, 15 kW to 20 kW : Rs. 15,700, 20 kW to 45 kW : Rs. 19,500,
19(Temperature rise test, IS 9283)	-	0	For Type Tests : upto 3.7 kW : Rs. 9,700 , 3.7 kW to 7.5 kW : Rs. 10,000, 7.5 kW to 11 kW : Rs. 11,000, 11 kW to 15 kW : Rs. 13,500, 15 kW to 20 kW : Rs. 15,700, 20 kW to 45 kW : Rs. 19,500,
19(Temperature rise test, IS 9283)	-	0	For Type Tests : upto 3.7 kW : Rs. 9,700 , 3.7 kW to 7.5 kW : Rs. 10,000, 7.5 kW to 11 kW : Rs. 11,000, 11 kW to 15 kW : Rs. 13,500, 15 kW to 20 kW : Rs. 15,700, 20 kW to 45 kW : Rs. 19,500,
20(High Voltage test, IS 9283)	-	0	For Type Tests : upto 3.7 kW : Rs. 9,700 , 3.7 kW to 7.5 kW : Rs. 10,000, 7.5 kW to 11 kW : Rs. 11,000, 11 kW to 15 kW : Rs. 13,500, 15 kW to 20 kW : Rs. 15,700, 20 kW to 45 kW : Rs. 19,500,
21(Insulation Resistance test, IS 9283)	-	0	For Type Tests : upto 3.7 kW : Rs. 9,700 , 3.7 kW to 7.5 kW : Rs. 10,000, 7.5 kW to 11 kW : Rs. 11,000, 11 kW to 15 kW : Rs. 13,500, 15 kW to 20 kW : Rs. 15,700, 20 kW to 45 kW : Rs. 19,500,
22(Speed, IS 9283)	-	0	For Type Tests : upto 3.7 kW : Rs. 9,700 , 3.7 kW to 7.5 kW : Rs. 10,000, 7.5 kW to 11 kW : Rs. 11,000, 11 kW to 15 kW : Rs. 13,500, 15 kW to 20 kW : Rs. 15,700, 20 kW to 45 kW : Rs. 19,500,
23(Leakage Current test, IS 9283)	-	0	For Type Tests : upto 3.7 kW : Rs. 9,700 , 3.7 kW to 7.5 kW : Rs. 10,000, 7.5 kW to 11 kW : Rs. 11,000, 11 kW to 15 kW : Rs. 13,500, 15 kW to 20 kW : Rs. 15,700, 20 kW to 45 kW : Rs. 19,500,
16.1(c)(Measurement of Stator Resistance)	-	0	For Type Tests : upto 3.7 kW : Rs. 9,700 , 3.7 kW to 7.5 kW : Rs. 10,000, 7.5 kW to 11 kW : Rs. 11,000, 11 kW to 15 kW : Rs. 13,500, 15 kW to 20 kW : Rs. 15,700, 20 kW to 45 kW : Rs. 19,500,
16.1(d)(No Load Test)	-	0	For Type Tests : upto 3.7 kW : Rs. 9,700 , 3.7 kW to 7.5 kW : Rs. 10,000, 7.5 kW to 11 kW : Rs. 11,000, 11 kW to 15 kW : Rs. 13,500, 15 kW to 20 kW : Rs. 15,700, 20 kW to 45 kW : Rs. 19,500,
16.1(e)(Reduced Voltage running up Test)	-	0	For Type Tests : upto 3.7 kW : Rs. 9,700 , 3.7 kW to 7.5 kW : Rs. 10,000, 7.5 kW to 11 kW : Rs. 11,000, 11 kW to 15 kW : Rs. 13,500, 15 kW to 20 kW : Rs. 15,700, 20 kW to 45 kW : Rs. 19,500,
16.1(f)(Locked Rotor test)	-	0	For Type Tests : upto 3.7 kW : Rs. 9,700 , 3.7 kW to 7.5 kW : Rs. 10,000, 7.5 kW to 11 kW : Rs. 11,000, 11 kW to 15 kW : Rs. 13,500, 15 kW to 20 kW : Rs. 15,700, 20 kW to 45 kW : Rs. 19,500,
16.1(g)(Full Load Test)	-	0	For Type Tests : upto 3.7 kW : Rs. 9,700 , 3.7 kW to 7.5 kW : Rs. 10,000, 7.5 kW to 11 kW : Rs. 11,000, 11 kW to 15 kW : Rs. 13,500, 15 kW to 20 kW : Rs. 15,700, 20 kW to 45 kW : Rs. 19,500,
16.1m(Momentary over-load test)	-	0	For Type Tests : upto 3.7 kW : Rs. 9,700 , 3.7 kW to 7.5 kW : Rs. 10,000, 7.5 kW to 11 kW : Rs. 11,000, 11 kW to 15 kW : Rs. 13,500, 15 kW to 20 kW : Rs. 15,700, 20 kW to 45 kW : Rs. 19,500,
16.1 (h)(Performance Characteristics)	-	0	For Type Tests : upto 3.7 kW : Rs. 9,700 , 3.7 kW to 7.5 kW : Rs. 10,000, 7.5 kW to 11 kW : Rs. 11,000, 11 kW to 15 kW : Rs. 13,500, 15 kW to 20 kW : Rs. 15,700, 20 kW to 45 kW : Rs. 19,500,
16.2 ( a)(Insulation Resistance)	-	0	For Type Tests : upto 3.7 kW : Rs. 9,700 , 3.7 kW to 7.5 kW : Rs. 10,000, 7.5 kW to 11 kW : Rs. 11,000, 11 kW to 15 kW : Rs. 13,500, 15 kW to 20 kW : Rs. 15,700, 20 kW to 45 kW : Rs. 19,500,
16.2 ( b)(Voltage, Time)	-	0	For Type Tests : upto 3.7 kW : Rs. 9,700 , 3.7 kW to 7.5 kW : Rs. 10,000, 7.5 kW to 11 kW : Rs. 11,000, 11 kW to 15 kW : Rs. 13,500, 15 kW to 20 kW : Rs. 15,700, 20 kW to 45 kW : Rs. 19,500,
16.2 (c)(Voltage, Current, Power, Frequency, Speed)	-	0	For Type Tests : upto 3.7 kW : Rs. 9,700 , 3.7 kW to 7.5 kW : Rs. 10,000, 7.5 kW to 11 kW : Rs. 11,000, 11 kW to 15 kW : Rs. 13,500, 15 kW to 20 kW : Rs. 15,700, 20 kW to 45 kW : Rs. 19,500,
16.2 (d)(Voltgae, Current, Power, Torque)	-	0	For Type Tests : upto 3.7 kW : Rs. 9,700 , 3.7 kW to 7.5 kW : Rs. 10,000, 7.5 kW to 11 kW : Rs. 11,000, 11 kW to 15 kW : Rs. 13,500, 15 kW to 20 kW : Rs. 15,700, 20 kW to 45 kW : Rs. 19,500,
16.2 (e)(Voltage, Frequency, Speed)	-	0	For Type Tests : upto 3.7 kW : Rs. 9,700 , 3.7 kW to 7.5 kW : Rs. 10,000, 7.5 kW to 11 kW : Rs. 11,000, 11 kW to 15 kW : Rs. 13,500, 15 kW to 20 kW : Rs. 15,700, 20 kW to 45 kW : Rs. 19,500,
5.1.3(Construction, IS 9283)	-	0	For Type Tests : upto 3.7 kW : Rs. 9,700 , 3.7 kW to 7.5 kW : Rs. 10,000, 7.5 kW to 11 kW : Rs. 11,000, 11 kW to 15 kW : Rs. 13,500, 15 kW to 20 kW : Rs. 15,700, 20 kW to 45 kW : Rs. 19,500,
15.3(Marking, IS 9283)	-	0	For Type Tests : upto 3.7 kW : Rs. 9,700 , 3.7 kW to 7.5 kW : Rs. 10,000, 7.5 kW to 11 kW : Rs. 11,000, 11 kW to 15 kW : Rs. 13,500, 15 kW to 20 kW : Rs. 15,700, 20 kW to 45 kW : Rs. 19,500,
15.1(Marking, IS 9283)	-	0	For Type Tests : upto 3.7 kW : Rs. 9,700 , 3.7 kW to 7.5 kW : Rs. 10,000, 7.5 kW to 11 kW : Rs. 11,000, 11 kW to 15 kW : Rs. 13,500, 15 kW to 20 kW : Rs. 15,700, 20 kW to 45 kW : Rs. 19,500,
15.1(Marking, IS 9283)	-	0	For Type Tests : upto 3.7 kW : Rs. 9,700 , 3.7 kW to 7.5 kW : Rs. 10,000, 7.5 kW to 11 kW : Rs. 11,000, 11 kW to 15 kW : Rs. 13,500, 15 kW to 20 kW : Rs. 15,700, 20 kW to 45 kW : Rs. 19,500,
15.1(Marking, IS 9283)	-	0	For Type Tests : upto 3.7 kW : Rs. 9,700 , 3.7 kW to 7.5 kW : Rs. 10,000, 7.5 kW to 11 kW : Rs. 11,000, 11 kW to 15 kW : Rs. 13,500, 15 kW to 20 kW : Rs. 15,700, 20 kW to 45 kW : Rs. 19,500,
15.1(Marking, IS 9283)	-	0	For Type Tests : upto 3.7 kW : Rs. 9,700 , 3.7 kW to 7.5 kW : Rs. 10,000, 7.5 kW to 11 kW : Rs. 11,000, 11 kW to 15 kW : Rs. 13,500, 15 kW to 20 kW : Rs. 15,700, 20 kW to 45 kW : Rs. 19,500,
15.1(Marking, IS 9283)	-	0	For Type Tests : upto 3.7 kW : Rs. 9,700 , 3.7 kW to 7.5 kW : Rs. 10,000, 7.5 kW to 11 kW : Rs. 11,000, 11 kW to 15 kW : Rs. 13,500, 15 kW to 20 kW : Rs. 15,700, 20 kW to 45 kW : Rs. 19,500,
15.1(Marking, IS 9283)	-	0	For Type Tests : upto 3.7 kW : Rs. 9,700 , 3.7 kW to 7.5 kW : Rs. 10,000, 7.5 kW to 11 kW : Rs. 11,000, 11 kW to 15 kW : Rs. 13,500, 15 kW to 20 kW : Rs. 15,700, 20 kW to 45 kW : Rs. 19,500,
15.1(Marking, IS 9283)	-	0	For Type Tests : upto 3.7 kW : Rs. 9,700 , 3.7 kW to 7.5 kW : Rs. 10,000, 7.5 kW to 11 kW : Rs. 11,000, 11 kW to 15 kW : Rs. 13,500, 15 kW to 20 kW : Rs. 15,700, 20 kW to 45 kW : Rs. 19,500,
15.1(Marking, IS 9283)	-	0	For Type Tests : upto 3.7 kW : Rs. 9,700 , 3.7 kW to 7.5 kW : Rs. 10,000, 7.5 kW to 11 kW : Rs. 11,000, 11 kW to 15 kW : Rs. 13,500, 15 kW to 20 kW : Rs. 15,700, 20 kW to 45 kW : Rs. 19,500,
15.1(Marking, IS 9283)	-	0	For Type Tests : upto 3.7 kW : Rs. 9,700 , 3.7 kW to 7.5 kW : Rs. 10,000, 7.5 kW to 11 kW : Rs. 11,000, 11 kW to 15 kW : Rs. 13,500, 15 kW to 20 kW : Rs. 15,700, 20 kW to 45 kW : Rs. 19,500,
15.1(Marking, IS 9283)	-	0	For Type Tests : upto 3.7 kW : Rs. 9,700 , 3.7 kW to 7.5 kW : Rs. 10,000, 7.5 kW to 11 kW : Rs. 11,000, 11 kW to 15 kW : Rs. 13,500, 15 kW to 20 kW : Rs. 15,700, 20 kW to 45 kW : Rs. 19,500,
15.1(Marking, IS 9283)	-	0	For Type Tests : upto 3.7 kW : Rs. 9,700 , 3.7 kW to 7.5 kW : Rs. 10,000, 7.5 kW to 11 kW : Rs. 11,000, 11 kW to 15 kW : Rs. 13,500, 15 kW to 20 kW : Rs. 15,700, 20 kW to 45 kW : Rs. 19,500,
15.1(Marking, IS 9283)	-	0	For Type Tests : upto 3.7 kW : Rs. 9,700 , 3.7 kW to 7.5 kW : Rs. 10,000, 7.5 kW to 11 kW : Rs. 11,000, 11 kW to 15 kW : Rs. 13,500, 15 kW to 20 kW : Rs. 15,700, 20 kW to 45 kW : Rs. 19,500,
5.1(Construction, IS 9283)	-	0	-
5.1.1(Construction, IS 9283)	-	0	-
5.1.2(Construction, IS 9283)	-	0	-
5.1.4(Construction, IS 9283)	-	0	-
5.2.1(Earthing, IS 9283)	-	0	-
5.2.2(Earthing, IS 9283)	-	0	-
5.2.3(Earthing, IS 9283)	-	0	-
5.2.4(Earthing, IS 9283)	-	0	-
5.2.5(Earthing, IS 9283)	-	0	-
5.3(Foreign Matter, IS 9283)	-	0	-
5.5(Finish of Bearings, IS 9283)	-	0	-
5.6(Balancing of Rotor, IS 9283)	-	0	-
7.1(Dimensions of Motors, IS 9283)	-	0	-
7.2.1(Tolerances, IS 9283)	-	0	-
7.2.2(Tolerances, IS 9283)	-	0	-
8(Type of duty, IS 9283)	-	0	-
13(Terminal Markings, IS 9283)	-	0	-
15.1(Marking, IS 9283)	-	0	-
17.1(Performance values, IS 9283)	-	0	-
17.1(Performance values, IS 9283)	-	0	-
17.1(Performance values, IS 9283)	-	0	-
17.1(Performance values, IS 9283)	-	0	-
18.1(Overload test, IS 9283)	-	0	-
19(Temperature rise test, IS 9283)	-	0	-
19(Temperature rise test, IS 9283)	-	0	-
20(High Voltage test, IS 9283)	-	0	-
21(Insulation Resistance test, IS 9283)	-	0	-
22(Speed, IS 9283)	-	0	-
23(Leakage Current test, IS 9283)	-	0	-
16.1(c)(Measurement of Stator Resistance)	-	0	-
16.1(d)(No Load Test)	-	0	-
16.1(e)(Reduced Voltage running up Test)	-	0	-
16.1(f)(Locked Rotor test)	-	0	-
16.1(g)(Full Load Test)	-	0	-
16.1m(Momentary over-load test)	-	0	-
16.1 (h)(Performance Characteristics)	-	0	-
16.2 ( a)(Insulation Resistance)	-	0	-
16.2 ( b)(Voltage, Time)	-	0	-
16.2 (c)(Voltage, Current, Power, Frequency, Speed)	-	0	-
16.2 (d)(Voltgae, Current, Power, Torque)	-	0	-
16.2 (e)(Voltage, Frequency, Speed)	-	0	-
5.1.3(Construction, IS 9283)	-	0	-
15.3(Marking, IS 9283)	-	0	-
15.1(Marking, IS 9283)	-	0	-
15.1(Marking, IS 9283)	-	0	-
15.1(Marking, IS 9283)	-	0	-
15.1(Marking, IS 9283)	-	0	-
15.1(Marking, IS 9283)	-	0	-
15.1(Marking, IS 9283)	-	0	-
15.1(Marking, IS 9283)	-	0	-
15.1(Marking, IS 9283)	-	0	-
15.1(Marking, IS 9283)	-	0	-
15.1(Marking, IS 9283)	-	0	-
15.1(Marking, IS 9283)	-	0	-
15.1(Marking, IS 9283)	-	0	-

22 May, 2029

-
Included w.e.f. 01.03.2024

Bureau of Indian Standards

The National Standards Body of India

JBS TESTING SOLUTIONS (Unit-2) (24), Jalandhar

Plot No. 24, Street No. 2, Adjoining focal Point Road, Transport Nagar, Jalandhar, Jalandhar, Jalandhar, Punjab, 144004

7582929529 unit2.jbs@gmail.com

Scope List