BIS - LIMS (Laboratory Information Management System)

BUREAU VERITAS CONSUMER PRODUCTS SERVICES INDIA PRIVATE LIMITED, NOIDA

C-19, Sector -7, Noida, Gautam Buddha Nagar, Uttar Pradesh, 201301

9818494127 monika.ahuja@bureauveritas.com

Scope List

Reset

69 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

IS 17636 (2021)

Bunk Beds - Specification

Furniture

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
CLAUSE 4(DESIGN AND WORKMANSHIP)	-	1000	-
CLAUSE 5(DIMENSIONS)	-	1000	-
CLAUSE 6(SURFACE PERFORMANCE)	-	12000	-
CLAUSE 6.2(Fabric and Leather (Synthetic and Natural) Performance)	-	8000	-
CLAUSE 7.5.1(Attachment, Deflection and Strength of Ladder and Treads)	-	5000	-
CLAUSE 7.6(Strength of Frame and Fastenings)	-	3000	-
CLAUSE 7.7(Stability Test)	-	3000	-
CLAUSE 7.8(Fastening of Upper Bed to Lower Bed)	-	3000	-
Cl-5(Dimensions)	-	1000	-
Cl-6.1 (a)(Resistance to mechanical damage)	-	3000	-
Cl-6.1 (b)(Pencil hardness)	-	1000	-
Cl-6.1 (c)(Resistance to wet heat)	-	3000	-
Cl-6.1 (d)(Resistance to dry heat)	-	2000	-
Cl-6.1 (e)(Resistance to marking by cold liquids)	-	2000	-
Cl-6.1 (f)(Resistance to marking by cold oils and fats)	-	3000	-
Cl-6.1 (g)(Adhesive performance)	-	2000	-
Cl-6.2 (a) 1(Breaking load)	-	1000	-
Cl-6.2 (a) 2(Elongation at break)	-	1000	-
Cl-6.2 (a) 3(Tear strength)	-	600	-
Cl-6.2 (a) 4(Colour fastness to light)	-	1500	-
Cl-6.2 (a) 5(Colour fastness to rubbing)	-	500	-
Cl-6.2 (a) 6(Colour fastness to perspiration)	-	500	-
Cl-6.2 (a) 7(Colour fastness to water)	-	500	-
Cl-6.2 (a) 8(Pilling resistance)	-	1000	-
Cl-6.2 (a) 9(Coating adhesion strength)	-	1100	-
Cl-6.2 (a) 10(Seam slippage)	-	1000	-
Cl-6.2 (a) 11(Resistance to damage by flexing)	-	2000	-
Cl-6.2 (a) 12(Abrasion resistance)	-	1000	-
Cl-6.2 (a) 13(Bursting strength)	-	1500	-
Cl-6.2 (a) 14(Resistance to cold)	-	2000	-
Cl-6.2 (b) 1(Tear strength)	-	600	-
Cl-6.2 (b) 2(Flexing endurance)	-	1500	-
Cl-6.2 (b) 3(Finish adhesion)	-	1100	-
Cl-6.2 (b) 4(Colour fastness to artificial light)	-	1500	-
Cl-6.2 (b) 5(Colour fastness to rubbing)	-	600	-
Cl-6.2 (b) 6(Colour fastness to water spotting)	-	500	-
Cl-6.2 (b) 7(Water vapour permeability)	-	1500	-
Cl-6.2 (b) 8(Colour fastness to water)	-	500	-
Cl-7.1(general test conditions)	-	1000	-
Cl-7.2.1(Top Bed Safety Barriers)	-	1000	-
Cl-7.2.2(Top Bed Safety Barriers)	-	1000	-
Cl-7.2.3(Top Bed Safety Barriers)	-	1000	-
Cl-7.2.4(Top Bed Safety Barriers)	-	1000	-
Cl-7.3.1(Gaps)	-	1000	-
Cl-7.3.2(Gaps)	-	1000	-
Cl-7.4.1(Bed Base)	-	1000	-
Cl-7.4.2(Bed Base)	-	1000	-
Cl-7.5.1(Attachment, Deflection and Strength of Ladder and Treads)	-	5000	-
Cl-7.5.2(Dimensions of Treads)	-	5000	-
Cl-7.6(Strength of Frame and Fastenings)	-	3000	-
Cl-7.7(Stability)	-	3000	-
Cl-7.8(Fastening of Upper Bed to Lower Bed)	-	3000	-
Cl-10(Marking)	-	300	-

31 Dec, 2026

-
Included w.e.f.22.09.2025

IS 17635 (2022)

Beds - Specification

Furniture

35000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
CLAUSE 4(Design and workmanship)	-	1000	-
CLAUSE 5(Dimensions)	-	1000	-
CLAUSE 6(SURFACE PERFORMANCE)	-	12000	-
CLAUSE 6.2(Fabric and Leather (Synthetic and Natural) Performance)	-	0	-
CLAUSE 7(SAFETY TESTS)	-	0	-
CLAUSE 7.3(Stability Test)	-	1000	-
CLAUSE 7.4(Vertical Static Load Tests)	-	2000	-
CLAUSE 7.5(Horizontal Static Load Tests)	-	2000	-
CLAUSE 7.5.2(Horizontal Static Load Test of Beds Without Headboard)	-	2000	-
CLAUSE 7.6.1(Vertical Durability Test of Bed Base)	-	5000	-
CLAUSE 7.6.2(Horizontal Durability Test of Bed Frame)	-	5000	-
CLAUSE 7.6.3(Horizontal Durability Test of Headboards)	-	5000	-
CLAUSE 7.7(Vertical Impact Test)	-	2000	-
CLAUSE 8.1(Mechanisms for Lifting Bed Bases)	-	5000	-
CLAUSE 8.2(Extendable Storage Elements)	-	5000	-
Cl-5(Dimensions)	-	1000	-
Cl-6.1 (a)(Resistance to mechanical damage)	-	3000	-
Cl-6.1 (b)(Pencil hardness)	-	1000	-
Cl-6.1 (c)(Resistance to wet heat)	-	2000	-
Cl-6.1 (d)(Resistance to dry heat)	-	2000	-
Cl-6.1 (e)(Resistance to marking by cold liquids)	-	3000	-
Cl-6.1 (f)(Resistance to marking by cold oils and fats)	-	3000	-
Cl-6.1 (g)(Adhesive performance)	-	2000	-
Cl-6.2 (a) 1(Breaking load)	-	1000	-
Cl-6.2 (a) 2(Elongation at break)	-	1000	-
Cl-6.2 (a) 3(Tear strength)	-	600	-
Cl-6.2 (a) 4(Colour fastness to light)	-	1500	-
Cl-6.2 (a) 5(Colour fastness to rubbing)	-	500	-
Cl-6.2 (a) 6(Colour fastness to perspiration)	-	500	-
Cl-6.2 (a) 7(Colour fastness to water)	-	500	-
Cl-6.2 (a) 8(Pilling resistance)	-	1000	-
Cl-6.2 (a) 9(Coating adhesion strength)	-	1100	-
Cl-6.2 (a) 10(Seam slippage)	-	1000	-
Cl-6.2 (a) 11(Resistance to damage by flexing)	-	2000	-
Cl-6.2 (a) 12(Abrasion resistance)	-	1000	-
Cl-6.2 (b) 1(Tear strength)	-	600	-
Cl-6.2 (a) 13(Bursting strength)	-	1500	-
Cl-6.2 (a) 14(Resistance to cold)	-	2000	-
Cl-6.2 (b) 2(Flexing endurance)	-	1500	-
Cl-6.2 (b) 3(Finish adhesion)	-	1100	-
Cl-6.2 (b) 4(Colour fastness to artificial light)	-	1500	-
Cl-6.2 (b) 5(Colour fastness to rubbing)	-	600	-
Cl-6.2 (b) 6(Colour fastness to water spotting)	-	500	-
Cl-6.2 (b) 7(Water vapour permeability)	-	1500	-
Cl-6.2 (b) 8(Colour fastness to water)	-	500	-
Cl-7.1(Safety Tests)	-	2000	-
Cl-7.2(Safety Tests)	-	2000	-
Cl-7.3(Stability Test)	-	2000	-
Cl-7.4.1(Vertical Static Load on Bed Base)	-	2000	-
Cl-7.4.2(Vertical Static Load on Side Rail)	-	2000	-
Cl-7.5.1(Horizontal Static Load on Headboard)	-	2000	-
Cl-7.5.2(Horizontal Static Load Test of Beds Without Headboard)	-	2000	-
Cl-7.6.1(Vertical Durability Test of Bed Base)	-	5000	-
Cl-7.6.2(Horizontal Durability Test of Bed Frame)	-	5000	-
Cl-7.6.3(Horizontal Durability Test of Headboards)	-	5000	-
Cl-7.7(Vertical Impact Test)	-	2000	-
Cl-8.1.2(Durability of Mechanisms for Lifting Bed Bases)	-	5000	-
Cl-8.2.2(Durability of Extendable Storage Elements)	-	5000	-
Cl-10(Marking)	-	300	-

31 Dec, 2026

-
Included w.e.f 08.09.2025

IS 17633 (2022)

Tables and Desks - Specification

Furniture

30000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
CLAUSE 4(Design and workmanship)	-	1000	-
ClAUSE 5(Dimensions)	-	1000	-
CLAUSE 6(SURFACE PERFORMANCE REQUIRMENTS)	-	12000	-
CLAUSE 7.2.1(Stability Under Vertical Load)	-	1000	-
CLAUSE 7.2.1.1(Test for tables that can be set to a height of 950 mm or less)	-	1000	-
CLAUSE 7.2.1.2(" Test for Tables that can be set to a height greater than 950 mm")	-	1000	-
CLAUSE 7.3.1.2(For occasional heavy loads)	-	2000	-
CLAUSE 7.2.2(Stability with Extension Elements Open Place the table on the floor surface)	-	1000	-
CLAUSE 7.5.3(Stiffness of the Structure Under Horizontal Force)	-	3000	-
CLAUSE 7.2.3(Stability Under Horizontal Load)	-	1000	-
CLAUSE 7.2.3.1(Test for tables that can be set to a height of 950 mm or less)	-	1000	-
CLAUSE 7.2.3.2(" Test for Tables that can be set to a height greater than 950 mm")	-	2000	-
CLAUSE 7.3.1(Strength under Vertical Static Force)	-	2000	-
CLAUSE 7.3.1.1(Stated load)	-	2000	-
CLAUSE 7.3.2(Strength under horizontal static force)	-	2000	-
CLAUSE 7.4.1(Durability under Vertical Force)	-	8000	-
CLAUSE 7.4.2(Durability of the Height Adjustment Mechanism)	-	8000	-
CLAUSE 7.5.1(Durability and Stiffness Under Horizontal Force)	-	8000	-
CLAUSE 7.5.2(Durability under Horizontal Force)	-	8000	-
CLAUSE 7.6.1(Vertical Impact Test)	-	2000	-
CLAUSE 7.6.2(Vertical Impact Test for Glass Table Tops)	-	2000	-
CLAUSE 7.6.3(Vertical Impact Test for All Other Table Tops)	-	2000	-
CLAUSE 7.7(Deflection of Table Tops)	-	2000	-
CLAUSE 7.8(Durability of Tables with Castors)	-	8000	-
CLAUSE 7.9(Drop Test)	-	2000	-
Cl - 5(Dimensions)	-	1000	-
Cl-6 (a)(Resistance to mechanical damage)	-	3000	-
Cl-6 (b)(Pencil hardness)	-	1000	-
Cl-6 (c)(Resistance to wet heat)	-	2000	-
Cl-6 (d)(Resistance to dry heat)	-	2000	-
Cl-6 (e)(Resistance to marking by cold liquids)	-	3000	-
Cl-6 (f)(Resistance to marking by cold oils and fats)	-	3000	-
Cl-6 (g)(Adhesive performance)	-	2000	-
Cl-7.2.1(Stability Under Vertical Load)	-	1000	-
Cl-7.2.2(Stability with Extension Elements Open)	-	1000	-
Cl-7.2.3(Stability Under Horizontal Load)	-	1000	-
Cl-7.3.1(Strength under Vertical Static Force)	-	2000	-
Cl-7.3.2(Strength under horizontal static force)	-	2000	-
Cl-7.4.1(Durability under Vertical Force)	-	8000	-
Cl-7.4.2(Durability of the Height Adjustment Mechanism)	-	8000	-
Cl-7.5.1(General)	-	1000	-
Cl-7.5.2(Durability under Horizontal Force)	-	8000	-
Cl-7.5.3(Stiffness of the Structure Under Horizontal Force)	-	3000	-
Cl-7.6.1(General)	-	1000	-
Cl-7.6.2(Vertical Impact Test for Glass Table Tops)	-	2000	-
Cl-7.6.3(Vertical Impact Test for All Other Table Tops)	-	2000	-
Cl-7.7(Deflection of Table Tops)	-	2000	-
Cl-7.8(Durability of Tables with Castors)	-	8000	-
Cl-7.9(Drop Test)	-	2000	-
Cl-9(Marking)	-	300	-
7.1(General test conditions)	-	1000	-

31 Dec, 2026

-
Included w.e.f. 11.09.2025

IS 17632 (2022)

General Purpose Chairs and Stools - Specification

Furniture

60000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
CLAUSE 5(DIMENSIONS)	-	1000	-
CLAUSE 6(SURFACE PERFORMANCE)	-	0	-
CLAUSE 6.2(Fabric and Leather (Synthetic and Natural) Performance)	-	0	-
CLAUSE 7.2.1(Forwards Overbalancing and Sideways Overbalancing for Chairs without Arms)	-	1000	-
CLAUSE 7.2.2(Rearwards Overbalancing)	-	1000	-
CLAUSE 7.2.3(Sideways Overbalancing for Chairs with Arms)	-	1000	-
CLAUSE 7.2.4(Sideways Overbalancing for Chairs with Arms)	-	1000	-
CLAUSE 7.3.1.1(Seat static load test)	-	2000	-
CLAUSE 7.3.1.2(Back static load test)	-	2000	-
CLAUSE 7.3.1.3(Armrests/Wings sideways static load test)	-	2000	-
CLAUSE 7.3.1.4(Arm downwards static load test)	-	2000	-
CLAUSE 7.3.1.5(Leg forward static load test)	-	2000	-
CLAUSE 7.3.1.6(Leg sideways static load test)	-	2000	-
CLAUSE 7.3.1.7(Diagonal base load test)	-	2000	-
CLAUSE 7.3.1.8(Foot rest static-load test)	-	2000	-
CLAUSE 7.3.2.1(Seat impact test)	-	2000	-
CLAUSE 7.3.2.2(Back impact test)	-	2000	-
CLAUSE 7.3.2.3(Arm impact test)	-	2000	-
CLAUSE 7.3.2.4(Drop test)	-	2000	-
CLAUSE 7.4.1(Seat Fatigue Test)	-	10000	-
CLAUSE 7.4.2(Back Fatigue Test)	-	10000	-
CLAUSE 7.4.3(Arm Rest Durability Test)	-	8000	-
Cl - 5(DIMENSIONS)	-	1000	-
Cl-6.1 (a)(Resistance to mechanical damage)	-	3000	-
Cl-6.1 (b)(Pencil hardness)	-	1000	-
Cl-6.1 (c)(Resistance to wet heat)	-	2000	-
Cl-6.1 (d)(Resistance to dry heat)	-	2000	-
Cl-6.1 (e)(Resistance to marking by cold liquids)	-	3000	-
Cl-6.1 (f)(Resistance to marking by cold oils and fats)	-	3000	-
Cl-6.1 (g)(Adhesive performance)	-	2000	-
Cl-6.2 (a) 1(Breaking load)	-	1000	-
Cl-6.2 (a) 2(Elongation at break)	-	1000	-
Cl-6.2 (a) 3(Tear strength)	-	600	-
Cl-6.2 (a) 4(Colour fastness to light)	-	1500	-
Cl-6.2 (a) 5(Colour fastness to rubbing)	-	500	-
Cl-6.2 (a) 6(Colour fastness to perspiration)	-	500	-
Cl-6.2 (a) 7(Colour fastness to water)	-	500	-
Cl-6.2 (a) 8(Pilling resistance)	-	1000	-
Cl-6.2 (a) 9(Coating adhesion strength)	-	1100	-
Cl-6.2 (a) 10(Seam slippage)	-	1000	-
Cl-6.2 (a) 11(Resistance to damage by flexing)	-	2000	-
Cl-6.2 (a) 12(Abrasion resistance)	-	1000	-
Cl-6.2 (a) 13(Bursting strength)	-	1500	-
Cl-6.2 (a) 14(Resistance to cold)	-	2000	-
Cl-6.2 (b) 1(Tear strength)	-	600	-
Cl-6.2 (b) 2(Flexing endurance)	-	1500	-
Cl-6.2 (b) 3(Finish adhesion)	-	1100	-
Cl-6.2 (b) 4(Colour fastness to artificial light)	-	1500	-
Cl-6.2 (b) 5(Colour fastness to rubbing)	-	600	-
Cl-6.2 (b) 6(Colour fastness to water spotting)	-	500	-
Cl-6.2 (b) 7(Water vapour permeability)	-	1500	-
Cl-6.2 (b) 8(Colour fastness to water)	-	500	-
Cl-7.2.1(Forwards Overbalancing and Sideways Overbalancing for Chairs without Arms)	-	1000	-
Cl-7.2.2(Rearwards Overbalancing)	-	1000	-
Cl-7.2.3(Sideways Overbalancing for Chairs with Arms)	-	1000	-
Cl-7.2.4(Stools/ Poufs (All Directions))	-	1000	-
Cl-7.3.1(Static Load Test)	-	2000	-
Cl-7.3.2(Impact Test)	-	4000	-
Cl-7.4.1(Seat Fatigue Test)	-	10000	-
Cl-7.4.2(Back Fatigue Test)	-	10000	-
Cl-7.4.3(Arm Rest Durability)	-	8000	-
Cl-9(Marking)	-	300	-
7.1(General test conditions)	-	300	-

31 Dec, 2026

-
Included w.e.f. 11.09.2025

IS 17631 (2022)

Work Chairs - Specification

Furniture

77000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
clause 4(DESIGN AND WORKMANSHIP)	-	1000	-
clause 5(DIMENSIONS)	-	1000	-
Cl-6.1 (a)(Resistance to mechanical damage)	-	3000	-
Cl-6.2 (a) (1)(For Fabric and Synthetic Leather:- Breaking load)	-	1000	-
Cl-7.3.1(Front Edge Overturning)	-	1000	-
Cl-7.3.2(Forwards Overturning)	-	1000	-
Cl-7.3.3(Forwards Overturning for Chairs with Foot Rest)	-	1000	-
Cl-7.3.4(Sideways Overturning for Chairs Without Arm Rests)	-	1000	-
Cl-6.1 (b)(Pencil hardness)	-	1000	-
Cl-6.1 (c)(Resistance to wet heat;)	-	2000	-
Cl-6.1 (d)(Resistance to dry heat;)	-	2000	-
Cl-6.1 (e)(Resistance to marking by cold liquids)	-	3000	-
Cl-6.1 (f)(Resistance to marking by cold oils and fats;)	-	3000	-
Cl-6.1 (g)(Adhesive performance)	-	2000	-
Cl-6.2 (a) (2)(For Fabric and Synthetic Leather:- Elongation at break)	-	1000	-
Cl-6.2 (a) (3)(For Fabric and Synthetic Leather:- Tear strength)	-	600	-
Cl-6.2 (a) (4)(For Fabric and Synthetic Leather:- Colour fastness to light)	-	1500	-
Cl-6.2 (a) (5)(For Fabric and Synthetic Leather:- Colour fastness to rubbing)	-	500	-
Cl-6.2 (a) (6)(For Fabric and Synthetic Leather:- Colour fastness to perspiration)	-	500	-
Cl-6.2 (a) (7)(For Fabric and Synthetic Leather:- Colour fastness to water)	-	500	-
Cl-6.2 (a) (8)(For Fabric and Synthetic Leather:- Pilling resistance)	-	1000	-
Cl-6.2 (a) (9)(For Fabric and Synthetic Leather:- Coating adhesion strength)	-	1100	-
Cl-6.2 (a) (10)(For Fabric and Synthetic Leather:- Seam slippage)	-	1000	-
Cl-6.2 (a) (11)(For Fabric and Synthetic Leather:- Resistance to damage by flexing)	-	1500	-
Cl-6.2 (a) (12)(For Fabric and Synthetic Leather:- Abrasion resistance)	-	1000	-
Cl-6.2 (a) (13)(For Fabric and Synthetic Leather:- Bursting strength)	-	1500	-
Cl-6.2 (a) (14)(For Fabric and Synthetic Leather:- Resistance to cold)	-	2000	-
Cl-6.2 (b) (2)(For Natural Leather:- Flexing endurance)	-	1500	-
Cl-6.2 (b) (1)(For Natural Leather:- Tear strength)	-	650	-
Cl-6.2 (b) (3)(For Natural Leather: Finish adhesion)	-	1100	-
Cl-6.2 (b) (4)(For Natural Leather: Colour fastness to artificial light)	-	1500	-
Cl-6.2 (b) (5)(For Natural Leather: Colour fastness to rubbing)	-	1000	-
Cl-6.2 (b) (6)(For Natural Leather: Colour fastness to water spotting)	-	500	-
Cl-6.2 (b) (7)(For Natural Leather: Water vapour permeability)	-	1500	-
Cl-6.2 (b) (8)(For Natural Leather: Colour fastness to water)	-	500	-
Cl-7.3.5(Sideways Overturning for Chairs With Arm Rests)	-	1000	-
Cl-7.3.6(Rearwards Overturning for Chairs Without Back Rest Inclination)	-	1000	-
Cl-7.3.7(Rearwards Overturning for Chairs with Backrest Inclination)	-	1000	-
Cl-7.4.1(Seat Front Edge Static Load Test)	-	2000	-
Cl-7.4.2(Combined Seat and Back Static Load Test)	-	2000	-
Cl-7.4.3(Arm Rest Downward Static Load Test — Central)	-	2000	-
Cl-7.4.4(Arm Rest Downward Static Load Test — Front)	-	2000	-
Cl-7.4.5(Arm Rest Sideways Static Load Test)	-	2000	-
Cl-7.4.6(Foot Rest Static Load Test)	-	2000	-
Cl-7.5.1(Seat and Back Durability)	-	18000	-
Cl-7.5.2(Arm Rest Durability)	-	8000	-
Cl-7.5.3(Swivel Test)	-	10000	-
Cl-7.5.4(Foot-rest Durability)	-	8000	-
Cl-7.5.5(Castor and Chair-Base Durability)	-	10000	-

31 Dec, 2026

-
Included w.e.f. 11.09.2025

IS 4250 (2025)

Electric Food-Mixers (Liquidizers and Grinders) and Centrifugal Juicers ï¿½ Specification ( Second Revision )

40000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4(General Requirements)	-	0	-
Cl-5(General Conditions for the tests)	-	0	-
Cl-6(Classification)	-	0	-
Cl-7(Marking)	-	2000	-
Cl-8(Safety Requirements)	-	5000	-
Cl-9(Endurance fpr motor and base assembly)	-	15000	-
Cl-10.2("Grinding Coffee (for Machines that Have a Dry Grinding Arrangement)")	-	5000	-
Cl-10.3(Whisking Egg Whites (for Machines that have Whisking Egg Arrangement))	-	0	Testing charges included in Cl. 10.2
Cl-10.4(Idli Batter)	-	0	Testing charges included in Cl. 10.2
Cl-10.5(Operational Tests for Juicers)	-	0	Testing charges included in Cl. 10.2
Cl-11(Temperature Withstand Test for Bowl)	-	2000	-
Cl-12.1(Test for Switches)	-	3000	-
Cl-13(Strength of Assembly)	-	0	-
Cl-14.2, 14.3 Table-2 (i)(Protection against access to live parts)	-	3000	-
Cl-14.2, Table-2 (ii)(Power input and current)	-	0	Testing charges included in Cl. 14.2
Cl-14.2, 14.3 Table-2 (iii)(Leakage current and electric strength at operating temperature)	-	0	Testing charges included in Cl. 14.2
Cl-14.2, Table-2 (iv)(Moisture resistance)	-	0	Testing charges included in Cl. 14.2
Cl-14.2, Table-2 (v)(Leakage current and electric strength)	-	0	Testing charges included in Cl. 14.2
Cl-14.2, 14.3 Table-2 (vi)(Provision for earthing)	-	0	Testing charges included in Cl. 14.2

31 Dec, 2026

-
Included w.e.f.19.06.2025 Exclusion EMI/EMC test as per Cl. 19.11.4.1 to Cl 19.11.4.7

IS 2082 (2018)

Stationary storage type electric water heaters - Specification (Fifth Revision)

33000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking)	-	1000	-
7(Marking)	-	0	Testing charges included in Cl. 7
7(Marking)	-	0	Testing charges included in Cl. 7
7(Marking)	-	0	Testing charges included in Cl. 7
7(Marking)	-	0	Testing charges included in Cl. 7
7(Marking)	-	0	Testing charges included in Cl. 7
7(Marking)	-	0	Testing charges included in Cl. 7
7(Marking)	-	0	Testing charges included in Cl. 7
7(Marking)	-	0	Testing charges included in Cl. 7
7(Marking)	-	0	Testing charges included in Cl. 7
7(Marking)	-	0	Testing charges included in Cl. 7
7(Marking)	-	0	Testing charges included in Cl. 7
7(Marking)	-	0	Testing charges included in Cl. 7
7(Marking)	-	0	Testing charges included in Cl. 7
7(Marking)	-	0	Testing charges included in Cl. 7
7(Marking)	-	0	Testing charges included in Cl. 7
7(Marking)	-	0	Testing charges included in Cl. 7
7(Marking)	-	0	Testing charges included in Cl. 7
7(Marking)	-	0	Testing charges included in Cl. 7
7(Marking)	-	0	Testing charges included in Cl. 7
7(Marking)	-	0	Testing charges included in Cl. 7
7(Marking)	-	0	Testing charges included in Cl. 7
7(Marking)	-	0	Testing charges included in Cl. 7
7(Marking)	-	0	Testing charges included in Cl. 7
7(Marking)	-	0	Testing charges included in Cl. 7
7(Marking)	-	0	Testing charges included in Cl. 7
7(Marking)	-	0	Testing charges included in Cl. 7
7(Marking)	-	0	Testing charges included in Cl. 7
6(Classification )	-	0	-
6(Classification )	-	0	-
(Cl.8 of IS 302-2-21:2011)(Protection Against Access to Live Parts)	-	0	-
(Cl.10 of IS 302-2-21: 2011)(Power Input & Current)	-	0	-
(Cl.11 of 302-2-21:2011)(Heating)	-	0	-
(Cl.11 of 302-2-21:2011)(Heating)	-	0	Testing charges included in Cl. 11
(Cl.11 of 302-2-21:2011)(Heating)	-	0	Testing charges included in Cl. 11
(Cl.13 of IS 302-2-21:2011)(Leakage Current )	-	0	-
(Cl.13 of IS 302-2-21:2011)(Electrical Strength at Operating Temperature)	-	0	Testing charges included in Cl. 14
(Cl.14ofIS302-2-21:2011)(Transient Over Voltages)	-	0	-
(Cl.15 of IS 302-2-21-2011)(Moisture Resistance)	-	0	-
(Cl.15 of IS 302-2-21-2011)(Moisture Resistance)	-	0	Testing charges included in Cl. 15
(Cl.15 of IS 302-2-21-2011)(Moisture Resistance)	-	0	Testing charges included in Cl. 15
(Cl.17 of IS 302-2-21:2011)(Overload protection of transformers & associated circuits)	-	0	-
(Cl.19 of IS 302-2-21:2011)(Abnormal Operation)	-	0	-
(Cl.19 of IS 302-2-21:2011)(Abnormal Operation)	-	0	Testing charges included in Cl. 19
(Cl.19 of IS 302-2-21:2011)(Abnormal Operation)	-	0	Testing charges included in Cl. 19
(Cl.19 of IS 302-2-21:2011)(Abnormal Operation)	-	0	Testing charges included in Cl. 19
(Cl.20 of IS 302-2-21:2011)(Stability & Mechanical Hazards)	-	0	-
(Cl.21ofIS302-2-21:2011)(Mechanical strength)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	Testing charges included in Cl. 22
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	Testing charges included in Cl. 22
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	Testing charges included in Cl. 22
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	Testing charges included in Cl. 22
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	Testing charges included in Cl. 22
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	Testing charges included in Cl. 22
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	Testing charges included in Cl. 22
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	Testing charges included in Cl. 22
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	Testing charges included in Cl. 22
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	Testing charges included in Cl. 22
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	Testing charges included in Cl. 22
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	Testing charges included in Cl. 22
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	Testing charges included in Cl. 22
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	Testing charges included in Cl. 22
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	Testing charges included in Cl. 22
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	Testing charges included in Cl. 22
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	Testing charges included in Cl. 22
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	Testing charges included in Cl. 22
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	Testing charges included in Cl. 22
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	Testing charges included in Cl. 22
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	Testing charges included in Cl. 22
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	Testing charges included in Cl. 22
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	Testing charges included in Cl. 22
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	Testing charges included in Cl. 22
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	Testing charges included in Cl. 22
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	Testing charges included in Cl. 22
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	Testing charges included in Cl. 22
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	Testing charges included in Cl. 22
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	Testing charges included in Cl. 22
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	Testing charges included in Cl. 22
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	Testing charges included in Cl. 22
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	Testing charges included in Cl. 22
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	Testing charges included in Cl. 22
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	Testing charges included in Cl. 22
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	Testing charges included in Cl. 22
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	Testing charges included in Cl. 22
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	Testing charges included in Cl. 22
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	Testing charges included in Cl. 22
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	Testing charges included in Cl. 22
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	Testing charges included in Cl. 22
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	Testing charges included in Cl. 22
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	Testing charges included in Cl. 22
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	Testing charges included in Cl. 22
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	Testing charges included in Cl. 22
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	Testing charges included in Cl. 22
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	Testing charges included in Cl. 22
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	Testing charges included in Cl. 22
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	Testing charges included in Cl. 22
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	Testing charges included in Cl. 22
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	Testing charges included in Cl. 22
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	Testing charges included in Cl. 22
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	Testing charges included in Cl. 22
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	Testing charges included in Cl. 22
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	Testing charges included in Cl. 22
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	Testing charges included in Cl. 22
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	Testing charges included in Cl. 22
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	Testing charges included in Cl. 22
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	Testing charges included in Cl. 22
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	Testing charges included in Cl. 22
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	Testing charges included in Cl. 22
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	0	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	0	Testing charges included in Cl. 23
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	0	Testing charges included in Cl. 23
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	0	Testing charges included in Cl. 23
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	0	Testing charges included in Cl. 23
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	0	Testing charges included in Cl. 23
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	0	Testing charges included in Cl. 23
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	0	Testing charges included in Cl. 23
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	0	Testing charges included in Cl. 23
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	0	Testing charges included in Cl. 23
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	0	Testing charges included in Cl. 23
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	0	Testing charges included in Cl. 23
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	0	Testing charges included in Cl. 23
(Cl.24ofIS302-221:2011)(Component)	-	1000	-
(Cl.24ofIS302-221:2011)(Component)	-	0	Testing charges included in Cl. 24
(Cl.24ofIS302-221:2011)(Component)	-	0	Testing charges included in Cl. 24
(Cl.24ofIS302-221:2011)(Component)	-	0	Testing charges included in Cl. 24
(Cl.24ofIS302-221:2011)(Component)	-	0	Testing charges included in Cl. 24
(Cl.24ofIS302-221:2011)(Component)	-	0	Testing charges included in Cl. 24
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	0	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	0	Testing charges included in Cl. 25
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	0	Testing charges included in Cl. 25
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	0	Testing charges included in Cl. 25
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	0	Testing charges included in Cl. 25
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	0	Testing charges included in Cl. 25
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	0	Testing charges included in Cl. 25
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	0	Testing charges included in Cl. 25
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	0	Testing charges included in Cl. 25
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	0	Testing charges included in Cl. 25
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	0	Testing charges included in Cl. 25
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	0	Testing charges included in Cl. 25
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	0	Testing charges included in Cl. 25
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	0	Testing charges included in Cl. 25
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	0	Testing charges included in Cl. 25
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	0	Testing charges included in Cl. 25
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	0	Testing charges included in Cl. 25
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	0	Testing charges included in Cl. 25
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	0	Testing charges included in Cl. 25
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	0	Testing charges included in Cl. 25
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	0	Testing charges included in Cl. 25
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	0	Testing charges included in Cl. 25
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	0	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	0	Testing charges included in Cl. 26
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	0	Testing charges included in Cl. 26
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	0	Testing charges included in Cl. 26
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	0	Testing charges included in Cl. 26
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	0	Testing charges included in Cl. 26
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	0	Testing charges included in Cl. 26
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	0	Testing charges included in Cl. 26
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	0	Testing charges included in Cl. 26
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	0	Testing charges included in Cl. 26
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	0	Testing charges included in Cl. 26
(Cl.27 of IS 302-2-21:2011)(Provision for Earthing)	-	0	-
(Cl.27 of IS 302-2-21:2011)(Provision for Earthing)	-	0	Testing charges included in Cl. 27
(Cl.27 of IS 302-2-21:2011)(Provision for Earthing)	-	0	Testing charges included in Cl. 27
(Cl.27 of IS 302-2-21:2011)(Provision for Earthing)	-	0	Testing charges included in Cl. 27
(Cl.27 of IS 302-2-21:2011)(Provision for Earthing)	-	0	Testing charges included in Cl. 27
(Cl.27 of IS 302-2-21:2011)(Provision for Earthing)	-	0	Testing charges included in Cl. 27
(Cl.28 of IS 302-2-21:2011)(Screws & Connections)	-	0	-
(Cl.29ofIS302-2-21:2011)(Clearances, Creepage Distances and Solid Insulation)	-	0	-
(Cl.30 of IS 302-2-21:2011)(Resistance to Heat & Fire)	-	0	-
(Cl.30 of IS 302-2-21:2011)(Resistance to Heat & Fire)	-	0	Testing charges included in Cl. 30
(Cl.31 of IS 302-2-21:2011)(Resistance to Rusting)	-	0	-
(Cl.15 of IS 2082:2018)(Verification of the Rated Capacity)	-	2000	-
(Cl.16 of IS 2082:2018)(Standing Loss per 24 Hours)	-	8000	-
(Cl.17 of IS 2082:2018)(Hot Water Output)	-	3000	-
(Cl.18 of IS 2082:2018)( Reheating Time)	-	3000	-
(Cl.19 of IS 2082:2018)(Mixing Factor)	-	1000	-
(Cl.20 of IS 2082:2018)(Deviation of Dial Calibration)	-	1000	-
(Cl.21 of IS 2082:2018)(Cyclic Temperature Variation)	-	1000	-
(Cl.22 of IS 2082:2018)(Finish)	-	1000	-
Cl.22 of IS 2082:2018(Finish)	-	0	-
Cl.21 of IS 2082:2018(Cyclic Temperature Variation)	-	0	-
Cl.20 of IS 2082:2018(Deviation of Dial Calibration)	-	0	-
Cl.19 of IS 2082:2018(Mixing Factor)	-	0	-
Cl.18 of IS 2082:2018( Reheating Time)	-	0	-
Cl.17 of IS 2082:2018(Hot Water Output)	-	0	-
Cl.16 of IS 2082:2018(Standing Loss per 24 Hours)	-	0	-
Cl.15 of IS 2082:2018(Verification of the Rated Capacity)	-	0	-
Cl.31 of IS 302-2-21:2018(Resistance to Rusting)	-	0	-
Cl.30.2 of IS 302-1:2008(Resistance to Heat & Fire : Glow wire test )	-	0	Testing charges included in Cl. 30
Cl.30.1 of IS 302-1:2008(Resistance to Heat & Fire : Ball pressure test )	-	0	Testing charges included in Cl. 30
Cl.29.2 of IS 302-1:2008(Clearances, Creepage Distances and Solid Insulation : Creepage distance )	-	0	Testing charges included in Cl. 29
Cl.29.1 of IS 302-1:2008(Clearances, Creepage Distances and Solid Insulation : Clearance distance )	-	0	Testing charges included in Cl. 29
Cl.28 of IS 302-2-21:2018(Screws & Connections)	-	0	Testing charges included in Cl. 28
Cl.27.5 of IS 302-1:2008(Provision for Earthing : ECR )	-	0	Testing charges included in Cl. 27
Cl.27 of IS 302-2-21:2018(Provision for Earthing)	-	0	Testing charges included in Cl. 27
Cl.26 of IS 302-2-21: 2018(Terminals for External Conductors)	-	0	Testing charges included in Cl. 26
Cl.25.18 of IS 302-1:2008(Supply Connection & External Flexible Cords)	-	0	Testing charges included in Cl. 25
Cl.25.15 of IS 302-1:2008(Supply Connection & External Flexible Cords : Cord grip test - displacement )	-	0	Testing charges included in Cl. 25
Cl.25.15 of IS 302-1:2008(Supply Connection & External Flexible Cords : Cord grip test )	-	0	Testing charges included in Cl. 25
Cl.25.12 of IS 302-1:2008(Supply Connection & External Flexible Cords : Moulding of supply cord )	-	0	Testing charges included in Cl. 25
Cl.25.10 of IS 302-1:2008(Supply Connection & External Flexible Cords : Colour of Earthing conductor )	-	0	Testing charges included in Cl. 25
Cl.25.8 of IS 302-2-21:2018(Supply Connection & External Flexible Cords : Resistance of supply cord )	-	0	Testing charges included in Cl. 25
Cl.25.5 of IS 302-1:2008(Supply Connection & External Flexible Cords : Type of attachment )	-	0	Testing charges included in Cl. 25
Cl.25 of IS 302-2-21:2018(Supply Connection & External Flexible Cords : connection to the supply mains)	-	0	Testing charges included in Cl. 25
Cl.24.102 of IS 302-221:2018(Component : Operation of thermal cut-out )	-	0	Testing charges included in Cl. 24
Cl.24.101 of IS302-221:2018(Component : Location of non self reseting thermal cut out )	-	0	Testing charges included in Cl. 24
Cl.24of IS 302-221:2018(Component : Relevent Indian standards )	-	0	Testing charges included in Cl. 24
Cl. 23 of IS 302-1:2008(Internal Wiring : color identification for earthing conductor )	-	0	Testing charges included in Cl. 23
Cl. 23 of IS 302-1:2008(Internal Wiring )	-	0	Testing charges included in Cl. 23
Cl.22.111 of IS 302-2-21:2018(Construction : Resistance to vacuum )	-	0	Testing charges included in Cl. 22
Cl.22.110 of IS 302-2-21:2018(Construction : meterial of connections )	-	0	Testing charges included in Cl. 22
Cl.22.110 of IS 302-2-21:2018(Construction : Material of Inner conatiner )	-	0	Testing charges included in Cl. 22
Cl.22.109 of IS 302-2-21:2018(Construction : Drain for appliance having a capacity of more than 15 liter)	-	0	Testing charges included in Cl. 22
Cl.22.108 of IS 302-2-21:2018(Construction : fixing to wall )	-	0	Testing charges included in Cl. 22
Cl.22.107 of IS 302-2-21:2018(Construction : Position of Heating elements and thermal control sensor)	-	0	Testing charges included in Cl. 22
Cl.22.106 of IS 302-2-21:2018(Construction : Operation of thermal cut- out )	-	0	Testing charges included in Cl. 22
Cl.22.104 of IS 302-2-21:2018(Construction : Outlet of open outlet heater )	-	0	Testing charges included in Cl. 22
Cl.22.103 of IS 302-2-21:2018(Construction : Operation of Pressure relieve devices )	-	0	Testing charges included in Cl. 22
Cl.22.102 of IS 302-2-21:2018(Construction : repeated drawing of water temp )	-	0	Testing charges included in Cl. 22
Cl.22.101 of IS 302-2-21:2018(Construction : rated pressure of closed water heater )	-	0	Testing charges included in Cl. 22
Cl.22.47 of IS 302-2-21:2018 (Construction : Water pressure test )	-	0	Testing charges included in Cl. 22
Cl.22.44 of IS 302-1:2008(Construction : Shape and decoration of enclosure)	-	0	Testing charges included in Cl. 22
Cl.22.34, Cl 22.35 of IS 302-1:2008(Construction : Shaft of operating Knobs )	-	0	Testing charges included in Cl. 22
Cl.22.33 of IS 302-1:2008(Construction : Direct contact of liquids )	-	0	Testing charges included in Cl. 22
Cl 22.26 ,Cl.22.28, Cl 22.29, Cl 22.30 , Cl 22.31, Cl 22.32 of IS 302-1:2008(Construction : Supplymentry/ double / reinforced insulation for Class II/ Class III appliance )	-	0	Testing charges included in Cl. 22
Cl.22.18 Of IS 302-1:2008(Construction : Resistance to corrosion )	-	0	Testing charges included in Cl. 22
Cl.22.17 of IS 302-1:2008(Construction : Spacers )	-	0	Testing charges included in Cl. 22
Cl.22.14 of IS 302-1:2008(Construction : ragged or sharp edges)	-	0	Testing charges included in Cl. 22
Cl.22.12 of IS 302-1:2008(Construction : Fixing of Handle, knob, grips, levers and similar parts)	-	0	Testing charges included in Cl. 22
Cl.22.11 of IS 302-1:2008(Construction : Fixing of non detachable part )	-	0	Testing charges included in Cl. 22
Cl.22.7 of IS 302-1:2008(Construction: adequate safeguards against the risk of excessive pressure)	-	0	Testing charges included in Cl. 22
Cl.22.6 of IS 302-2-21:2018(Construction : Size of drain hole )	-	0	Testing charges included in Cl. 22
Cl.22.6 of IS 302-1:2008(Construction : Effect of water on 3 insulation )	-	0	Testing charges included in Cl. 22
Cl.22.2 of IS 302-1:2008(Construction : Provision to ensure all pole disconnection )	-	0	Testing charges included in Cl. 22
Cl.22.1 of IS 302-1:2008(Construction : IP test )	-	0	Testing charges included in Cl. 22
Cl.21.2 of IS 302-1:2008(Mechanical strength : prevent penetration by sharp implements. )	-	0	Testing charges included in Cl. 21
Cl.21.1 of IS 302-1:2008(Mechanical strength : Rough handling in normal use)	-	0	Testing charges included in Cl. 21
Cl.20 of IS 302-1:2008(Stability & Mechanical Hazards)	-	0	Testing charges included in Cl. 20
Cl.19 of IS 302-2-21:2018(Abnormal Operation : leakage from container during test)	-	0	Testing charges included in Cl. 19
Cl.19 of IS 302-2-21:2018(Abnormal Operation : High Voltage )	-	0	Testing charges included in Cl. 19
Cl.19 of IS 302-2-21:2018(Abnormal Operation : Insulation of the supply cable or cord)	-	0	Testing charges included in Cl. 19
Cl.19 of IS 302-2-21:2018(Abnormal Operation : Wall ceiling temp. of test corner )	-	0	Testing charges included in Cl. 19
Cl.19 of IS 302-2-21:2018(Abnormal Operation : emission of flame or molten metal or poisonous or ignitable gas )	-	0	Testing charges included in Cl. 19
Cl.16 of IS 302-2-21-2018(Leakage current and Electric strength (After humidity): Electric Strentgh )	-	0	Testing charges included in Cl. 16
Cl.16 of IS 302-2-21-2018(Leakage current and Electric strength (After humidity): Leakage current )	-	0	Testing charges included in Cl. 16
Cl.15 of IS 302-2-21-2018(Moisture Resistance)	-	0	Testing charges included in Cl. 15
Cl.14 of IS 302-2-21:2018(Transient Over Voltages)	-	0	Testing charges included in Cl. 14
Cl.13 of IS 302-2-21:2018(3 Strength at Operating Temperature)	-	0	Testing charges included in Cl. 13
Cl.13 of IS 302-2-21:2018(Leakage Current )	-	0	Testing charges included in Cl. 13
Cl.11 of 302-2-21:2018(Heating : Room Temp.)	-	0	Testing charges included in Cl. 11
Cl.11 of 302-2-21:2018(Heating : Temp of Rubber or PVC insulation of internal and external wiring)	-	0	Testing charges included in Cl. 11
Cl.11 of 302-2-21:2018(Heating : Temp of Walls, ceilings and floor of the test corner )	-	0	Testing charges included in Cl. 11
Cl.10 of IS 302-2-21: 2018(Power Input & Current)	-	0	Testing charges included in Cl. 10
Cl.8 of IS 302-2-21:2018(Protection Against Access to Live Parts)	-	0	Testing charges included in Cl. 8
7.101(Marking : Indifiction of water inlet and water outlet )	-	0	Testing charges included in Cl. 7
7.14(Marking : Legibility and durability)	-	0	Testing charges included in Cl. 7
7.13(Marking : Official language of Instruction )	-	0	Testing charges included in Cl. 7
7.11(Marking : Indication of controls )	-	0	Testing charges included in Cl. 7
7.8(Marking : Terminals )	-	0	Testing charges included in Cl. 7
7.6(Marking : Symbol used )	-	0	Testing charges included in Cl. 7
7.1(Marking : Warning for Open- outlet )	-	0	Testing charges included in Cl. 7
7.1(Marking : Statement for pressure reducing valve ( For rated pressure less than 0.6 MPa))	-	0	Testing charges included in Cl. 7
7.1(Marking : Statement for a pressure-relief device)	-	0	Testing charges included in Cl. 7
7.1(Marking : Rated capacity)	-	0	Testing charges included in Cl. 7
7.1(Marking : Rated pressure)	-	0	Testing charges included in Cl. 7
7.1(Marking : Country of manufacture)	-	0	Testing charges included in Cl. 7
7.1(Marking: IP Number)	-	0	Testing charges included in Cl. 7
7.1(Marking: Symbol for Class II)	-	0	Testing charges included in Cl. 7
7.1(Marking: Model or type reference)	-	0	Testing charges included in Cl. 7
7.1(Marking: Name, trademark or identification mark of manufacturer )	-	0	Testing charges included in Cl. 7
7.1(Marking : Rated power input)	-	0	Testing charges included in Cl. 7
7.1(Marking : Symbol for nature of supply )	-	0	Testing charges included in Cl. 7
7.1(Marking : Rated Voltage )	-	0	Testing charges included in Cl. 7
Cl.32 of IS 302-1:2008()	-	0	-
4(GENERAL REQUIREMENT)	-	0	-
5(GENERAL CONDITIONS FOR THE TESTS)	-	0	-
12(THERMOSTAT SETTING)	-	2000	-
Cl-10(Mounting of the water heater)	-	2000	-
Cl-11(Measurements of stored water temperature)	-	4000	-
Cl-12(Thermostat setting)	-	0	-
Cl-13(Measurement of energy consumption)	-	3000	-
Cl-14(Verification of the rated capacity)	-	0	Testing charges included in Cl.14
(Cl.22 of IS 302-2-21:2018)(Constructions)	-	0	Testing charges included in Cl. 22
(Cl.22 of IS 302-2-21:2018)(Constructions)	-	0	Testing charges included in Cl. 22
(Cl.22.108 of IS 302-2-21:2018)(Constructions)	-	0	Testing charges included in Cl. 22
(Cl.22.6 of IS 302-2-21:2018)(Constructions)	-	0	Testing charges included in Cl. 22
(Cl.22.47 of IS 302-2-21:2018)(Constructions)	-	0	Testing charges included in Cl. 22
(Cl.22.47 of IS 302-2-21:2018)(Constructions)	-	0	Testing charges included in Cl. 22
(Cl.22.47 of IS 302-2-21:2018)(Constructions)	-	0	Testing charges included in Cl. 22
(Cl.22.47 of IS 302-2-21:2018)(Constructions)	-	0	Testing charges included in Cl. 22
(Cl.22.47 of IS 302-2-21:2018)(Constructions)	-	0	Testing charges included in Cl. 22
(Cl.22.101 of IS 302-2-21:2018)(Constructions)	-	0	Testing charges included in Cl. 22
(Cl.22.105 of IS 302-2-21:2018)(Constructions)	-	0	Testing charges included in Cl. 22
(Cl.22.101 of IS 302-2-21:2018)(Constructions)	-	0	Testing charges included in Cl. 22
(Cl.22.103 of IS 302-2-21:2018)(Constructions)	-	0	Testing charges included in Cl. 22
(Cl.22.104 of IS 302-2-21:2018)(Constructions)	-	0	Testing charges included in Cl. 22
(Cl.22.104 of IS 302-2-21:2018)(Constructions)	-	0	Testing charges included in Cl. 22
(Cl.22.105 of IS 302-2-21:2018)(Constructions)	-	0	Testing charges included in Cl. 22
(Cl.22.109 of IS 302-2-21:2018)(Constructions)	-	0	Testing charges included in Cl. 22
(Cl.24.101 of IS 302-2-21:2018)(Components)	-	0	Testing charges included in Cl. 22
(Cl.25 of IS 302-2-21:2018)(Supply Connection and External Flexible cords)	-	0	Testing charges included in Cl. 22
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	Testing charges included in Cl. 22
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	Testing charges included in Cl. 22
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	Testing charges included in Cl. 22
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	Testing charges included in Cl. 22
7(Marking)	-	0	Testing charges included in Cl. 7
7(Marking)	-	0	Testing charges included in Cl. 7
7(Marking)	-	0	Testing charges included in Cl. 7
7(Marking)	-	0	Testing charges included in Cl. 7
7(Marking)	-	0	Testing charges included in Cl. 7
7(Marking)	-	0	Testing charges included in Cl. 7
7(Marking)	-	0	Testing charges included in Cl. 7
7(Marking)	-	0	Testing charges included in Cl. 7
7(Marking)	-	0	Testing charges included in Cl. 7
7(Marking)	-	0	Testing charges included in Cl. 7
7(Marking)	-	0	Testing charges included in Cl. 7
7(Marking)	-	0	Testing charges included in Cl. 7
7(Marking)	-	0	Testing charges included in Cl. 7
7(Marking)	-	0	Testing charges included in Cl. 7
7(Marking)	-	0	Testing charges included in Cl. 7
7(Marking)	-	0	Testing charges included in Cl. 7
7(Marking)	-	0	Testing charges included in Cl. 7
7(Marking)	-	0	Testing charges included in Cl. 7
7(Marking)	-	0	Testing charges included in Cl. 7
7(Marking)	-	0	Testing charges included in Cl. 7
7(Marking)	-	0	Testing charges included in Cl. 7
7(Marking)	-	0	Testing charges included in Cl. 7
7(Marking)	-	0	Testing charges included in Cl. 7
7(Marking)	-	0	Testing charges included in Cl. 7
7(Marking)	-	0	Testing charges included in Cl. 7
7(Marking)	-	0	Testing charges included in Cl. 7
7(Marking)	-	0	Testing charges included in Cl. 7
7(Marking)	-	0	Testing charges included in Cl. 7
6(Classification )	-	0	Testing charges included in Cl. 6
6(Classification )	-	0	Testing charges included in Cl. 6
(Cl.8 of IS 302-2-21:2011)(Protection Against Access to Live Parts)	-	0	Testing charges included in Cl. 8
(Cl.10 of IS 302-2-21: 2011)(Power Input & Current)	-	0	Testing charges included in Cl. 10
(Cl.11 of 302-2-21:2011)(Heating)	-	0	Testing charges included in Cl. 11
(Cl.11 of 302-2-21:2011)(Heating)	-	0	Testing charges included in Cl. 11
(Cl.11 of 302-2-21:2011)(Heating)	-	0	Testing charges included in Cl. 11
(Cl.13 of IS 302-2-21:2011)(Leakage Current )	-	0	Testing charges included in Cl. 13
(Cl.13 of IS 302-2-21:2011)(Electrical Strength at Operating Temperature)	-	0	Testing charges included in Cl. 13
(Cl.14ofIS302-2-21:2011)(Transient Over Voltages)	-	0	Testing charges included in Cl. 14
(Cl.15 of IS 302-2-21-2011)(Moisture Resistance)	-	0	Testing charges included in Cl. 15
(Cl.15 of IS 302-2-21-2011)(Moisture Resistance)	-	0	Testing charges included in Cl. 15
(Cl.15 of IS 302-2-21-2011)(Moisture Resistance)	-	0	Testing charges included in Cl. 15
(Cl.17 of IS 302-2-21:2011)(Overload protection of transformers & associated circuits)	-	0	Testing charges included in Cl. 17
(Cl.19 of IS 302-2-21:2011)(Abnormal Operation)	-	0	Testing charges included in Cl. 19
(Cl.19 of IS 302-2-21:2011)(Abnormal Operation)	-	0	Testing charges included in Cl. 19
(Cl.19 of IS 302-2-21:2011)(Abnormal Operation)	-	0	Testing charges included in Cl. 19
(Cl.19 of IS 302-2-21:2011)(Abnormal Operation)	-	0	Testing charges included in Cl. 19
(Cl.20 of IS 302-2-21:2011)(Stability & Mechanical Hazards)	-	0	Testing charges included in Cl. 20
(Cl.21ofIS302-2-21:2011)(Mechanical strength)	-	0	Testing charges included in Cl. 21
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	Testing charges included in Cl. 22
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	Testing charges included in Cl. 22
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	Testing charges included in Cl. 22
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	Testing charges included in Cl. 22
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	Testing charges included in Cl. 22
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	Testing charges included in Cl. 22
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	Testing charges included in Cl. 22
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	Testing charges included in Cl. 22
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	Testing charges included in Cl. 22
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	Testing charges included in Cl. 22
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	Testing charges included in Cl. 22
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	Testing charges included in Cl. 22
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	Testing charges included in Cl. 22
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	Testing charges included in Cl. 22
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	Testing charges included in Cl. 22
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	Testing charges included in Cl. 22
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	Testing charges included in Cl. 22
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	Testing charges included in Cl. 22
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	Testing charges included in Cl. 22
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	Testing charges included in Cl. 22
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	Testing charges included in Cl. 22
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	Testing charges included in Cl. 22
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	Testing charges included in Cl. 22
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	Testing charges included in Cl. 22
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	Testing charges included in Cl. 22
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	Testing charges included in Cl. 22
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	Testing charges included in Cl. 22
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	Testing charges included in Cl. 22
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	Testing charges included in Cl. 22
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	Testing charges included in Cl. 22
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	Testing charges included in Cl. 22
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	Testing charges included in Cl. 22
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	Testing charges included in Cl. 22
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	Testing charges included in Cl. 22
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	Testing charges included in Cl. 22
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	Testing charges included in Cl. 22
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	Testing charges included in Cl. 22
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	Testing charges included in Cl. 22
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	Testing charges included in Cl. 22
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	Testing charges included in Cl. 22
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	Testing charges included in Cl. 22
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	Testing charges included in Cl. 22
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	Testing charges included in Cl. 22
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	Testing charges included in Cl. 22
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	Testing charges included in Cl. 22
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	Testing charges included in Cl. 22
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	Testing charges included in Cl. 22
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	Testing charges included in Cl. 22
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	Testing charges included in Cl. 22
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	Testing charges included in Cl. 22
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	Testing charges included in Cl. 22
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	Testing charges included in Cl. 22
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	Testing charges included in Cl. 22
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	Testing charges included in Cl. 22
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	Testing charges included in Cl. 22
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	Testing charges included in Cl. 22
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	Testing charges included in Cl. 22
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	Testing charges included in Cl. 22
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	Testing charges included in Cl. 22
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	Testing charges included in Cl. 22
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	Testing charges included in Cl. 22
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	0	Testing charges included in Cl. 23
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	0	Testing charges included in Cl. 23
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	0	Testing charges included in Cl. 23
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	0	Testing charges included in Cl. 23
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	0	Testing charges included in Cl. 23
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	0	Testing charges included in Cl. 23
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	0	Testing charges included in Cl. 23
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	0	Testing charges included in Cl. 23
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	0	Testing charges included in Cl. 23
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	0	Testing charges included in Cl. 23
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	0	Testing charges included in Cl. 23
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	0	Testing charges included in Cl. 23
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	0	Testing charges included in Cl. 23
(Cl.24ofIS302-221:2011)(Component)	-	0	Testing charges included in Cl. 24
(Cl.24ofIS302-221:2011)(Component)	-	0	Testing charges included in Cl. 24
(Cl.24ofIS302-221:2011)(Component)	-	0	Testing charges included in Cl. 24
(Cl.24ofIS302-221:2011)(Component)	-	0	Testing charges included in Cl. 24
(Cl.24ofIS302-221:2011)(Component)	-	0	Testing charges included in Cl. 24
(Cl.24ofIS302-221:2011)(Component)	-	0	Testing charges included in Cl. 24
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	0	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	0	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	0	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	0	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	0	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	0	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	0	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	0	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	0	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	0	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	0	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	0	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	0	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	0	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	0	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	0	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	0	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	0	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	0	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	0	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	0	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	0	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	0	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	0	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	0	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	0	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	0	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	0	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	0	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	0	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	0	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	0	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	0	-
(Cl.27 of IS 302-2-21:2011)(Provision for Earthing)	-	0	-
(Cl.27 of IS 302-2-21:2011)(Provision for Earthing)	-	0	-
(Cl.27 of IS 302-2-21:2011)(Provision for Earthing)	-	0	-
(Cl.27 of IS 302-2-21:2011)(Provision for Earthing)	-	0	-
(Cl.27 of IS 302-2-21:2011)(Provision for Earthing)	-	0	-
(Cl.27 of IS 302-2-21:2011)(Provision for Earthing)	-	0	-
(Cl.28 of IS 302-2-21:2011)(Screws & Connections)	-	0	-
(Cl.29ofIS302-2-21:2011)(Clearances, Creepage Distances and Solid Insulation)	-	0	-
(Cl.30 of IS 302-2-21:2011)(Resistance to Heat & Fire)	-	0	-
(Cl.30 of IS 302-2-21:2011)(Resistance to Heat & Fire)	-	0	-
(Cl.31 of IS 302-2-21:2011)(Resistance to Rusting)	-	0	-
(Cl.15 of IS 2082:2018)(Verification of the Rated Capacity)	-	0	-
(Cl.16 of IS 2082:2018)(Standing Loss per 24 Hours)	-	0	-
(Cl.17 of IS 2082:2018)(Hot Water Output)	-	0	-
(Cl.18 of IS 2082:2018)( Reheating Time)	-	0	-
(Cl.19 of IS 2082:2018)(Mixing Factor)	-	0	-
(Cl.20 of IS 2082:2018)(Deviation of Dial Calibration)	-	0	-
(Cl.21 of IS 2082:2018)(Cyclic Temperature Variation)	-	0	-
(Cl.22 of IS 2082:2018)(Finish)	-	0	-
Cl.32 of IS 302-1:2008()	-	0	-
4(GENERAL REQUIREMENT)	-	0	-
5(GENERAL CONDITIONS FOR THE TESTS)	-	0	-
12(THERMOSTAT SETTING)	-	0	-
Cl-10(Mounting of the water heater)	-	0	-
Cl-11(Measurements of stored water temperature)	-	0	-
Cl-12(Thermostat setting)	-	0	-
Cl-13(Measurement of energy consumption)	-	0	-
Cl-14(Verification of the rated capacity)	-	0	-
(Cl.22 of IS 302-2-21:2018)(Constructions)	-	0	-
(Cl.22 of IS 302-2-21:2018)(Constructions)	-	0	-
(Cl.22.108 of IS 302-2-21:2018)(Constructions)	-	0	-
(Cl.22.6 of IS 302-2-21:2018)(Constructions)	-	0	-
(Cl.22.47 of IS 302-2-21:2018)(Constructions)	-	0	-
(Cl.22.47 of IS 302-2-21:2018)(Constructions)	-	0	-
(Cl.22.47 of IS 302-2-21:2018)(Constructions)	-	0	-
(Cl.22.47 of IS 302-2-21:2018)(Constructions)	-	0	-
(Cl.22.47 of IS 302-2-21:2018)(Constructions)	-	0	-
(Cl.22.101 of IS 302-2-21:2018)(Constructions)	-	0	-
(Cl.22.105 of IS 302-2-21:2018)(Constructions)	-	0	-
(Cl.22.101 of IS 302-2-21:2018)(Constructions)	-	0	-
(Cl.22.103 of IS 302-2-21:2018)(Constructions)	-	0	-
(Cl.22.104 of IS 302-2-21:2018)(Constructions)	-	0	-
(Cl.22.104 of IS 302-2-21:2018)(Constructions)	-	0	-
(Cl.22.105 of IS 302-2-21:2018)(Constructions)	-	0	-
(Cl.22.109 of IS 302-2-21:2018)(Constructions)	-	0	-
(Cl.24.101 of IS 302-2-21:2018)(Components)	-	0	-
(Cl.25 of IS 302-2-21:2018)(Supply Connection and External Flexible cords)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-

31 Dec, 2026

-
Included w.e.f.20.06.2025 Exclusion (EMI/EMC)Cl 19.11.4.1 TO Cl 19.11.4.7

IS 302 : Part 2 : Sec 75 (2018)

Safety of Household and Similar Electrical Appliances Part 2 Particular Requirements Section 75 Commercial Dispensing Appliances and Vending Machines

58000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
32(Radiation, toxicity and similar hazards)	-	0	-
31(Resistance to rusting)	-	0	-
30.2.4(Resistance to heat and fire)	-	0	Testing charges included in Cl. 30.1
30.2(Resistance to heat and fire)	-	0	Testing charges included in Cl. 30.1
30.1(Resistance to heat and fire)	-	3000	-
29.3(Clearances, creepage distances and solid insulation)	-	0	Testing charges included in Cl. 29.1
29.2(Clearances, creepage distances and solid insulation)	-	0	Testing charges included in Cl. 29.1
29.1, Table No.- 16, Table No.- 17 & Table No.18(Clearances, creepage distances and solid insulation)	-	0	Testing charges included in Cl. 29.1
29.1, Table No.- 16, Table No.- 17 & Table No.18(Clearances, creepage distances and solid insulation)	-	2000	-
28.2 to 28.4(Screws and connections)	-	0	Testing charges included in Cl. 28.1
28.1, Table No.-14(Screws and connections)	-	1000	-
27.6(Provision for earthing)	-	0	Testing charges included in Cl. 27.5
27.5(Provision for earthing)	-	2000	-
27.1 to 27.4(Provision for earthing)	-	0	Testing charges included in Cl. 27.5
26.10 & 26.11(Terminals for external conductors)	-	0	Testing charges included in Cl. 26.1
26.9(Terminals for external conductors)	-	0	Testing charges included in Cl. 26.1
26.1 to 26.8(Terminals for external conductors)	-	1000	-
25.16 to 25.25(Supply connection and external flexible cords)	-	0	Testing charges included in Cl. 25.1
25.15(Supply connection and external flexible cords)	-	0	Testing charges included in Cl. 25.1
25.14(Supply connection and external flexible cords)	-	0	Testing charges included in Cl. 25.1
25.9 to 25.13(Supply connection and external flexible cords)	-	0	Testing charges included in Cl. 25.1
25.8, Table No.-11(Supply connection and external flexible cords)	-	0	Testing charges included in Cl. 25.1
25.5 to 25.7(Supply connection and external flexible cords)	-	0	Testing charges included in Cl. 25.1
25.4(Supply connection and external flexible cords)	-	0	Testing charges included in Cl. 25.1
25.3(Supply connection and external flexible cords)	-	0	Testing charges included in Cl. 25.1
25.2(Supply connection and external flexible cords)	-	0	Testing charges included in Cl. 25.1
25.1(Supply connection and external flexible cords)	-	1000	-
24.101 to 24.103(Components)	-	0	Testing charges included in Cl. 24.1
24.2 to 24.6(Components)	-	0	Testing charges included in Cl. 24.1
24.1(Components)	-	3000	-
23.101 to 23.102(Internal wiring)	-	0	Testing charges included in Cl. 23.1
23.6 to 23.10(Internal wiring)	-	0	Testing charges included in Cl. 23.1
23.5(Internal wiring)	-	0	Testing charges included in Cl. 23.1
23.4(Internal wiring)	-	0	Testing charges included in Cl. 23.1
23.3(Internal wiring)	-	0	Testing charges included in Cl. 23.1
23.1 & 23.2(Internal wiring)	-	2000	Testing charges included in Cl. 22.1
22.101 to 22.114(Constructions)	-	0	Testing charges included in Cl. 22.1
22.13 to 22.48(Constructions)	-	0	Testing charges included in Cl. 22.1
22.12(Constructions)	-	0	Testing charges included in Cl. 22.1
22.11(Constructions)	-	0	Testing charges included in Cl. 22.1
22.11(Constructions)	-	0	Testing charges included in Cl. 22.1
22.7 to 22.10(Constructions)	-	0	Testing charges included in Cl. 22.1
22.6(Constructions)	-	0	Testing charges included in Cl. 22.1
22.5(Constructions)	-	0	Testing charges included in Cl. 22.1
22.4(Constructions)	-	0	Testing charges included in Cl. 22.1
22.3(Constructions)	-	0	Testing charges included in Cl. 22.1
22.2(Constructions)	-	0	Testing charges included in Cl. 22.1
22.1(Constructions)	-	6000	-
21.2(MECHANICAL STRENGTH)	-	0	Testing charges included in Cl. 21.1
21.1(MECHANICAL STRENGTH)	-	1500	-
20.2(Stability and mechanical hazards)	-	1000	-
20.1(Stability and mechanical hazards)	-	1000	-
19.101 and 19.102(ABNORMAL OPERATION)	-	0	Testing charges included in Cl. 19.1
19.1 to 19.13, Table No. - 9(ABNORMAL OPERATION)	-	5000	-
17(Overload protection of transformers and associated circuits)	-	4000	-
16.3(Insulation resistance test)	-	0	Testing charges included in Cl. 16.1
16.3(Electric strength test)	-	0	Testing charges included in Cl. 16.1
16.1 & 16.2(Leakage current test)	-	3000	-
15.102(Moisture resistance)	-	0	Testing charges included in Cl. 15.1
15.102(Moisture resistance)	-	0	Testing charges included in Cl. 15.1
15.101(Moisture resistance)	-	0	Testing charges included in Cl. 15.1
15.3(Moisture resistance)	-	0	Testing charges included in Cl. 15.1
15.2(Moisture resistance)	-	0	Testing charges included in Cl. 15.1
15.1(Moisture resistance)	-	4500	-
14, Table No.- 6 & Table No.-16(Transient over voltages)	-	2000	-
13.3 and Table No.- 4(Electric strength test)	-	1500	-
13.1, 13.2(Leakage current test)	-	1500	-
11.1 to 11.8, Table No.-3(Heating)	-	4500	-
10.1 & 10.2 -Table No. 1, Table No. 2(Power Input and Current)	-	2000	-
8.1.5(Protection against access to live parts)	-	0	Testing charges included in Cl. 8.1
8.1.4(Protection against access to live parts)	-	0	Testing charges included in Cl. 8.1
8.1.3(Protection against access to live parts)	-	0	Testing charges included in Cl. 8.1
8.1.2(Protection against access to live parts)	-	0	Testing charges included in Cl. 8.1
8.1, 8.1.1 & 8.2(Protection against access to live parts)	-	2000	-
7.14(Legibility & Durability of Markings test)	-	0	Testing charges included in Cl. 7.1
7.1 to 7.13, 7.15, 7.16(Marking)	-	2000	-
32(Radiation, toxicity and similar hazards)	-	0	-
31(Resistance to rusting)	-	0	-
30.2.4(Resistance to heat and fire)	-	0	Testing charges included in Cl. 30.1
30.2(Resistance to heat and fire)	-	0	Testing charges included in Cl. 30.1
30.1(Resistance to heat and fire)	-	0	Testing charges included in Cl. 30.1
29.3(Clearances, creepage distances and solid insulation)	-	0	Testing charges included in Cl. 29.1
29.2(Clearances, creepage distances and solid insulation)	-	0	Testing charges included in Cl. 29.1
29.2(Clearances, creepage distances and solid insulation)	-	0	Testing charges included in Cl. 29.1
29.1, Table No.- 16, Table No.- 17 & Table No.18(Clearances, creepage distances and solid insulation)	-	0	Testing charges included in Cl. 29.1
29.1, Table No.- 16, Table No.- 17 & Table No.18(Clearances, creepage distances and solid insulation)	-	0	Testing charges included in Cl. 29.1
28.2 to 28.4(Screws and connections)	-	0	Testing charges included in Cl. 28.1
28.1, Table No.-14(Screws and connections)	-	0	Testing charges included in Cl. 28.1
27.6(Provision for earthing)	-	0	Testing charges included in Cl. 27.5
27.5(Provision for earthing)	-	0	Testing charges included in Cl. 27.5
27.1 to 27.4(Provision for earthing)	-	0	Testing charges included in Cl. 27.5
26.10 & 26.11(Terminals for external conductors)	-	0	Testing charges included in Cl. 26.1
26.9(Terminals for external conductors)	-	0	Testing charges included in Cl. 26.1
26.1 to 26.8(Terminals for external conductors)	-	0	Testing charges included in Cl. 26.1
25.16 to 25.25(Supply connection and external flexible cords)	-	0	Testing charges included in Cl. 25.1
25.15(Supply connection and external flexible cords)	-	0	Testing charges included in Cl. 25.1
25.14(Supply connection and external flexible cords)	-	0	Testing charges included in Cl. 25.1
25.9 to 25.13(Supply connection and external flexible cords)	-	0	Testing charges included in Cl. 25.1
25.8, Table No.-11(Supply connection and external flexible cords)	-	0	Testing charges included in Cl. 25.1
25.5 to 25.7(Supply connection and external flexible cords)	-	0	Testing charges included in Cl. 25.1
25.4(Supply connection and external flexible cords)	-	0	Testing charges included in Cl. 25.1
25.3(Supply connection and external flexible cords)	-	0	Testing charges included in Cl. 25.1
25.2(Supply connection and external flexible cords)	-	0	Testing charges included in Cl. 25.1
25.1(Supply connection and external flexible cords)	-	0	Testing charges included in Cl. 25.1
24.101 to 24.103(Components)	-	0	Testing charges included in Cl. 24.1
24.2 to 24.6(Components)	-	0	Testing charges included in Cl. 24.1
24.1(Components)	-	0	Testing charges included in Cl. 24.1
23.101 to 23.102(Internal wiring)	-	0	Testing charges included in Cl. 23.1
23.6 to 23.10(Internal wiring)	-	0	Testing charges included in Cl. 23.1
23.5(Internal wiring)	-	0	Testing charges included in Cl. 23.1
23.4(Internal wiring)	-	0	Testing charges included in Cl. 23.1
23.3(Internal wiring)	-	0	Testing charges included in Cl. 23.1
23.1 & 23.2(Internal wiring)	-	0	Testing charges included in Cl. 23.1
22.101 to 22.114(Constructions)	-	0	Testing charges included in Cl. 22.1
22.13 to 22.48(Constructions)	-	0	Testing charges included in Cl. 22.1
22.12(Constructions)	-	0	Testing charges included in Cl. 22.1
22.11(Constructions)	-	0	Testing charges included in Cl. 22.1
22.11(Constructions)	-	0	Testing charges included in Cl. 22.1
22.7 to 22.10(Constructions)	-	0	Testing charges included in Cl. 22.1
22.6(Constructions)	-	0	Testing charges included in Cl. 22.1
22.5(Constructions)	-	0	Testing charges included in Cl. 22.1
22.4(Constructions)	-	0	Testing charges included in Cl. 22.1
22.3(Constructions)	-	0	Testing charges included in Cl. 22.1
22.2(Constructions)	-	0	Testing charges included in Cl. 22.1
22.1(Constructions)	-	0	Testing charges included in Cl. 22.1
21.2(MECHANICAL STRENGTH)	-	0	-
21.1(MECHANICAL STRENGTH)	-	0	-
20.2(Stability and mechanical hazards)	-	0	-
20.1(Stability and mechanical hazards)	-	0	-
19.101 and 19.102(ABNORMAL OPERATION)	-	0	Testing charges included in Cl. 19.1
19.1 to 19.13, Table No. - 9(ABNORMAL OPERATION)	-	0	Testing charges included in Cl. 19.1
17(Overload protection of transformers and associated circuits)	-	0	Testing charges included in Cl. 17
16.3(Insulation resistance test)	-	0	Testing charges included in Cl. 16.1
16.3(Electric strength test)	-	0	Testing charges included in Cl. 16.1
16.1 & 16.2(Leakage current test)	-	0	Testing charges included in Cl. 16.1
15.102(Moisture resistance)	-	0	Testing charges included in Cl. 15.1
15.102(Moisture resistance)	-	0	Testing charges included in Cl. 15.1
15.101(Moisture resistance)	-	0	Testing charges included in Cl. 15.1
15.3(Moisture resistance)	-	0	Testing charges included in Cl. 15.1
15.2(Moisture resistance)	-	0	Testing charges included in Cl. 15.1
15.1(Moisture resistance)	-	0	Testing charges included in Cl. 15.1
14, Table No.- 6 & Table No.-16(Transient over voltages)	-	0	Testing charges included in Cl. 14
13.3 and Table No.- 4(Electric strength test)	-	0	Testing charges included in Cl. 13.1
13.1, 13.2(Leakage current test)	-	0	Testing charges included in Cl. 13.1
11.1 to 11.8, Table No.-3(Heating)	-	0	-
10.1 & 10.2 -Table No. 1, Table No. 2(Power Input and Current)	-	0	-
8.1.5(Protection against access to live parts)	-	0	Testing charges included in Cl. 8.1
8.1.4(Protection against access to live parts)	-	0	Testing charges included in Cl. 8.1
8.1.3(Protection against access to live parts)	-	0	Testing charges included in Cl. 8.1
8.1.2(Protection against access to live parts)	-	0	Testing charges included in Cl. 8.1
8.1, 8.1.1 & 8.2(Protection against access to live parts)	-	0	Testing charges included in Cl. 8.1
7.14(Legibility & Durability of Markings test)	-	0	Testing charges included in Cl. 7.1
7.1 to 7.13, 7.15, 7.16(Marking)	-	0	Testing charges included in Cl. 7.1
29.2(Clearances, creepage distances and solid insulation)	-	0	Testing charges included in Cl. 29.1

31 Dec, 2026

-
Included w.e.f.20.06.2025 Exclusion (EMI/EMC)Cl 19.11.4.1 TO Cl 19.11.4.7

IS 302 : Part 2 : Sec 30 (2007)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 30 room heaters (First Revision)

60500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.6 (Classification)	-	0	-
Cl.6 (Classification)	-	0	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	2000	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	0	Testing charges included in Cl. 7
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	0	Testing charges included in Cl. 7
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	0	Testing charges included in Cl. 7
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	0	Testing charges included in Cl. 7
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	0	Testing charges included in Cl. 7
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	0	Testing charges included in Cl. 7
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	0	Testing charges included in Cl. 7
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	0	Testing charges included in Cl. 7
Cl.7(Marking and Instructions)	-	0	Testing charges included in Cl. 7
Cl.7(Marking and Instructions)	-	0	Testing charges included in Cl. 7
Cl.7(Marking and Instructions)	-	0	Testing charges included in Cl. 7
Cl.7.3(Marking and Instructions)	-	0	Testing charges included in Cl. 7
Cl.7.3(Marking and Instructions)	-	0	Testing charges included in Cl. 7
Cl.7.3(Marking and Instructions)	-	0	Testing charges included in Cl. 7
Cl.7.4(Marking and Instructions)	-	0	Testing charges included in Cl. 7
Cl.7.5(Marking and Instructions)	-	0	Testing charges included in Cl. 7
Cl.7.6 & IS:302-1:2008(Marking and Instructions)	-	0	Testing charges included in Cl. 7
Cl.7.8 of IS :302-1:2008(Marking and Instructions)	-	0	Testing charges included in Cl. 7
Cl.7.9 of IS :302-1:2008(Marking and Instructions)	-	0	Testing charges included in Cl. 7
Cl.7.10 of IS :302-1:2008(Marking and Instructions)	-	0	Testing charges included in Cl. 7
Cl.7.11 of IS :302-1:2008(Marking and Instructions)	-	0	Testing charges included in Cl. 7
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	0	Testing charges included in Cl. 7
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	0	Testing charges included in Cl. 7
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	0	Testing charges included in Cl. 7
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	0	Testing charges included in Cl. 7
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	0	Testing charges included in Cl. 7
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	0	Testing charges included in Cl. 7
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	0	Testing charges included in Cl. 7
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	0	Testing charges included in Cl. 7
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	0	Testing charges included in Cl. 7
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	0	Testing charges included in Cl. 7
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	0	Testing charges included in Cl. 7
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	0	Testing charges included in Cl. 7
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	0	Testing charges included in Cl. 7
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	0	Testing charges included in Cl. 7
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	0	Testing charges included in Cl. 7
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	0	Testing charges included in Cl. 7
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	0	Testing charges included in Cl. 7
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	0	Testing charges included in Cl. 7
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	0	Testing charges included in Cl. 7
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	0	Testing charges included in Cl. 7
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	0	Testing charges included in Cl. 7
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	0	Testing charges included in Cl. 7
Cl.7.12.1 & IS:302-1:2009(Marking and Instructions)	-	0	Testing charges included in Cl. 7
Cl.7.13 of IS 302-1:2008(Marking and Instructions)	-	0	Testing charges included in Cl. 7
Cl.7.14 of IS302-1:2008(Marking and Instructions)	-	0	Testing charges included in Cl. 7
Cl.7.14(Marking and Instructions)	-	0	Testing charges included in Cl. 7
Cl.7.14(Marking and Instructions)	-	0	Testing charges included in Cl. 7
Cl.7.15 of IS 302-1:2008(Marking and Instructions)	-	0	Testing charges included in Cl. 7
Cl.7.15 of IS 302-1:2008(Marking and Instructions)	-	0	Testing charges included in Cl. 7
Cl.7.15 of IS 302-1:2008(Marking and Instructions)	-	0	Testing charges included in Cl. 7
Cl.7.15 of IS 302-1:2008(Marking and Instructions)	-	0	Testing charges included in Cl. 7
Cl.7.101(Marking and Instructions)	-	0	Testing charges included in Cl. 7
Cl.8 & IS:302-1:2008(Protection Against Access to Live Parts)	-	2000	-
Cl.10 & IS:302-1:2008(Power Input and Current)	-	2000	-
Cl.11 & IS:302-1:2008(Heating)	-	4000	-
Cl.11 & IS:302-1:2008(Heating)	-	0	Testing charges included in Cl. 11
Cl.11 & IS:302-1:2008(Heating)	-	0	Testing charges included in Cl. 11
Cl.11 & IS:302-1:2008(Heating)	-	0	Testing charges included in Cl. 11
Cl.11 & IS:302-1:2008(Heating)	-	0	Testing charges included in Cl. 11
Cl.11 & IS:302-1:2008(Heating)	-	0	Testing charges included in Cl. 11
Cl.11 & IS:302-1:2008(Heating)	-	0	Testing charges included in Cl. 11
Cl.11 & IS:302-1:2008(Heating)	-	0	Testing charges included in Cl. 11
Cl.11 & IS:302-1:2008(Heating)	-	0	Testing charges included in Cl. 11
Cl.11 & IS:302-1:2008(Heating)	-	0	Testing charges included in Cl. 11
Cl.11 & IS:302-1:2008(Heating)	-	0	Testing charges included in Cl. 11
Cl.11 & IS:302-1:2008(Heating)	-	0	Testing charges included in Cl. 11
Cl.11 & IS:302-1:2008(Heating)	-	0	Testing charges included in Cl. 11
Cl.11 & IS:302-1:2008(Heating)	-	0	Testing charges included in Cl. 11
Cl.11 & IS:302-1:2008(Heating)	-	0	Testing charges included in Cl. 11
Cl.11 & IS:302-1:2008(Heating)	-	0	Testing charges included in Cl. 11
Cl.11.8(Heating)	-	0	Testing charges included in Cl. 11
Cl.11.8(Heating)	-	0	Testing charges included in Cl. 11
Cl.11.8(Heating)	-	0	Testing charges included in Cl. 11
Cl.13 & IS:302-1:2008(Leakage Current & Electric Strength at operating temp. )	-	3000	-
Cl.13 & IS:302-1:2008(Leakage Current & Electric Strength at operating temp. )	-	0	Testing charges included in Cl. 13
Cl.14 & IS:302-1:2008(Transient Over Voltages)	-	2000	-
Cl.15 & IS: 302-1:2008(Moisture Resistance )	-	4000	-
Cl.15.3 of IS 302-1:200(Moisture Resistance )	-	0	Testing charges included in Cl. 15
Cl.16 & IS:302-1:2008(Leakage Current & Electric Strength )	-	3000	-
Cl.16 & IS:302-1:2008(Leakage Current & Electric Strength )	-	0	Testing charges included in Cl. 16
Cl.17 & IS:302-1:2008(Over load Protection of Transformers and Associated Circuits )	-	4000	-
Cl.18 (Endurance. )	-	0	-
Cl.19 & IS:302-1:2008(Abnormal Operation.)	-	6500	-
Cl.19 & IS:302-1:2008(Abnormal Operation.)	-	0	Testing charges included in Cl. 19
Cl.19 & IS:302-1:2008(Abnormal Operation.)	-	0	Testing charges included in Cl. 19
Cl.19 & IS:302-1:2008(Abnormal Operation.)	-	0	Testing charges included in Cl. 19
Cl.19.101(Abnormal Operation.)	-	0	Testing charges included in Cl. 19
Cl.19.102(Abnormal Operation.)	-	0	Testing charges included in Cl. 19
Cl.19.103(Abnormal Operation.)	-	0	Testing charges included in Cl. 19
Cl.19.104(Abnormal Operation.)	-	0	Testing charges included in Cl. 19
Cl.19.105(Abnormal Operation.)	-	0	Testing charges included in Cl. 19
Cl.19.106(Abnormal Operation.)	-	0	Testing charges included in Cl. 19
Table 8 of IS 302-1:2008(Abnormal Operation.)	-	0	Testing charges included in Cl. 19
Cl.19.107(Abnormal Operation.)	-	0	Testing charges included in Cl. 19
Cl.19.108(Abnormal Operation.)	-	0	Testing charges included in Cl. 19
Cl.19.109(Abnormal Operation.)	-	0	Testing charges included in Cl. 19
Cl.19.110(Abnormal Operation.)	-	0	Testing charges included in Cl. 19
Cl.19.111(Abnormal Operation.)	-	0	Testing charges included in Cl. 19
Cl.19.112(Abnormal Operation.)	-	0	Testing charges included in Cl. 19
Cl.19.113(Abnormal Operation.)	-	0	Testing charges included in Cl. 19
Cl.19.114(Abnormal Operation.)	-	0	Testing charges included in Cl. 19
Cl.20 & IS:302-1:2008(Stability & Mechanical Hazards)	-	2000	-
Cl.21 & IS:302-1:2008)(Mechanical Strength.)	-	3000	-
Cl.21.2 of IS 302-1:2008(Mechanical Strength.)	-	0	Testing charges included in Cl. 21
Cl.21.101 (Mechanical Strength.)	-	0	Testing charges included in Cl. 21
Cl.21.102(Mechanical Strength.)	-	0	Testing charges included in Cl. 21
Cl.21.103(Mechanical Strength.)	-	0	Testing charges included in Cl. 21
Cl.22.1 of IS 302-1:2008(Construction)	-	5000	-
Cl.22.5 of IS 302-1:2008(Construction)	-	0	Testing Testing charges included in Cl. 22.1charges included in Cl. 22.1
Cl.22.6 of IS 302-1:2008(Construction)	-	0	Testing charges included in Cl. 22.1
Cl.22.7 of IS 302-1:2008(Construction)	-	0	Testing charges included in Cl. 22.1
Cl.22.8 of IS 302-1:2008(Construction)	-	0	Testing charges included in Cl. 22.1
Cl.22.9 of IS 302-1:2008(Construction)	-	0	Testing charges included in Cl. 22.1
Cl.22.11(Construction)	-	0	Testing charges included in Cl. 22.1
Cl.22.12 of IS 302-1:2008(Construction)	-	0	Testing charges included in Cl. 22.1
Cl.22.13 of IS 302-1:2008(Construction)	-	0	Testing charges included in Cl. 22.1
Cl.22.14 of IS 302-1:2008(Construction)	-	0	Testing charges included in Cl. 22.1
Cl.22.18 of IS 302-1:2008(Construction)	-	0	Testing charges included in Cl. 22.1
Cl.22.20 of IS 302-1:2008(Construction)	-	0	Testing charges included in Cl. 22.1
Cl.22.21 of IS 302-1:2008(Construction)	-	0	Testing charges included in Cl. 22.1
Cl.23 & IS:302-1:2008(Internal Wiring )	-	2000	-
Cl.23.4 & Cl.29 of 302-1:2008(Internal Wiring )	-	0	Testing charges included in Cl. 23
Cl.23.5 of 302-1:2008(Internal Wiring )	-	0	Testing charges included in Cl. 23
Cl.23.7 of 302-1:2008(Internal Wiring )	-	0	Testing charges included in Cl. 23
C.23.7 of 302-1:2008(Internal Wiring )	-	0	Testing charges included in Cl. 23
Cl.24.1 of 302-1:2008(Component)	-	3000	-
Cl.24.1 of 302-1:2008(Component)	-	0	Testing charges included in Cl. 24.1
Cl.24.1.3 (Component)	-	0	Testing charges included in Cl. 24.1
Cl.24.1.3 (Component)	-	0	Testing charges included in Cl. 24.1
Cl.24.1.3 (Component)	-	0	Testing charges included in Cl. 24.1
Cl.24.1.3 (Component)	-	0	Testing charges included in Cl. 24.1
C.24.1.4(Component)	-	0	Testing charges included in Cl. 24.1
C.24.2 of 302-1:2008(Component)	-	0	Testing charges included in Cl. 24.1
Cl.24.10(Component)	-	0	Testing charges included in Cl. 24.1
Cl.25.1 of 302-1:2008(Supply Connection and External Flexible Cords )	-	2000	-
Cl. 25.2 of IS 3021:2008(Supply Connection and External Flexible Cords )	-	0	Testing charges included in Cl. 25.1
Cl. 25.3 of IS 302-1:2008(Supply Connection and External Flexible Cords )	-	0	Testing charges included in Cl. 25.1
Cl. 25.4 of IS 302-1:2008(Supply Connection and External Flexible Cords )	-	0	Testing charges included in Cl. 25.1
Cl.25.5 of 302-1:2008(Supply Connection and External Flexible Cords )	-	0	Testing charges included in Cl. 25.1
Cl.25.6 of 302-1:2008(Supply Connection and External Flexible Cords )	-	0	Testing charges included in Cl. 25.1
Cl.25.7.(Supply Connection and External Flexible Cords )	-	0	Testing charges included in Cl. 25.1
Cl.25.8(Supply Connection and External Flexible Cords )	-	0	Testing charges included in Cl. 25.1
Cl. 25.9(Supply Connection and External Flexible Cords )	-	0	Testing charges included in Cl. 25.1
Cl.25.10 of 302-1:2008(Supply Connection and External Flexible Cords )	-	0	Testing charges included in Cl. 25.1
Cl. 25.11(Supply Connection and External Flexible Cords )	-	0	Testing charges included in Cl. 25.1
Cl. 25.12(Supply Connection and External Flexible Cords )	-	0	Testing charges included in Cl. 25.1
Cl. 25.13(Supply Connection and External Flexible Cords )	-	0	Testing charges included in Cl. 25.1
Cl.25.14 of IS 302-1:2008(Supply Connection and External Flexible Cords )	-	0	Testing charges included in Cl. 25.1
Cl.25.15 of IS 302-1:2008(Supply Connection and External Flexible Cords )	-	0	Testing charges included in Cl. 25.1
Cl.25.15 of IS 302-1:2008(Supply Connection and External Flexible Cords )	-	0	Testing charges included in Cl. 25.1
Cl.25.17 of IS 302-1:2008(Supply Connection and External Flexible Cords )	-	0	Testing charges included in Cl. 25.1
Cl.25.18(Supply Connection and External Flexible Cords )	-	0	Testing charges included in Cl. 25.1
Cl.25.20(Supply Connection and External Flexible Cords )	-	0	Testing charges included in Cl. 25.1
Cl.26.1 of IS 302-1:2008(Terminal for External Conductors )	-	1000	-
Cl.26.10 of IS 302-1:2008(Terminal for External Conductors )	-	0	Testing charges included in Cl. 26.1
Cl.26.11 of IS 302-1:2008(Terminal for External Conductors )	-	0	Testing charges included in Cl. 26.1
Cl.27.1 of 302-1:2008(Provision for Earthing.)	-	2000	-
Cl.27.5 of 302-1:2008(Provision for Earthing.)	-	0	Testing charges included in Cl. 27.1
Cl.28 of 302-1:2008(Screws and Connections.)	-	1000	-
Cl.29 & IS:302-1:2008(Clearances, Creepage Distances and Solid Insulation)	-	2000	-
Cl.29 & IS:302-1:2008(Clearances, Creepage Distances and Solid Insulation)	-	0	Testing charges included in Cl. 29
Cl.30 & IS:302-1:2008(Resistance to Heat and Fire)	-	3000	-
Cl.30.2.2 of 302-1:2008(Resistance to Heat and Fire)	-	0	Testing charges included in Cl. 30
Cl.31 & IS:302-1:2008(Resistance to Rusting.)	-	0	-
Cl.32 & IS:302-1:2008(Radition,Toxicity and similar Hazards.)	-	0	-
Cl.31 of IS:302-1:2008(Resistance to Rusting.)	-	0	-
Cl.30.2 of 302-1:2008(Resistance to Heat and Fire : Resistance to fire)	-	0	Testing charges included in Cl. 30
Cl.30.1 of IS:302-1:2008(Resistance to Heat and Fire: Resistance to heat. )	-	0	Testing charges included in Cl. 30
Cl.29.2 of IS:302-1:2008(Clearances, Creepage Distances and Solid Insulation : Creepage Distance)	-	0	Testing charges included in Cl. 29
Cl.29.1 of IS:302-1:2008(Clearances, Creepage Distances and Solid Insulation : Clearance )	-	0	Testing charges included in Cl. 29
Cl.28 of 302-1:2008(Screws and Connections.)	-	0	Testing charges included in Cl. 28
Cl.27.5 of 302-1:2008(Provision for Earthing : ECR)	-	0	Testing charges included in Cl. 27.1
Cl.27.1 of 302-1:2008(Provision for Earthing )	-	0	Testing charges included in Cl. 27.1
Cl.26 of IS 302-1:2008(Terminal for External Conductors )	-	0	Testing charges included in Cl. 26
Cl.25.20 of 302-1:2008(Supply Connection and External Flexible Cords : Additional insulation )	-	0	Testing charges included in Cl. 25.1
Cl.25.18 of 302-1:2008(Supply Connection and External Flexible Cords : Arrangement of cord anchorages )	-	0	Testing charges included in Cl. 25.1
Cl.25.15 of IS 302-1:2008(Supply Connection and External Flexible Cords : Cord grip test - displacement)	-	0	Testing charges included in Cl. 25.1
Cl.25.15 of IS 302-1:2008(Supply Connection and External Flexible Cords : Cord grip test - strain at terminals )	-	0	Testing charges included in Cl. 25.1
Cl. 25.13 of 302-1:2008(Supply Connection and External Flexible Cords : Inlet opening of supply cords )	-	0	Testing charges included in Cl. 25.1
Cl. 25.12 of 302-1:2008(Supply Connection and External Flexible Cords : Moulding of cords )	-	0	Testing charges included in Cl. 25.1
Cl.25.10 of 302-1:2008(Supply Connection and External Flexible Cords : Colour of earthing wire )	-	0	Testing charges included in Cl. 25.1
Cl. 25.9 of 302-1:2008(Supply Connection and External Flexible Cords : Contact with sharp edge )	-	0	Testing charges included in Cl. 25.1
Cl.25.8 of 302-1:2008(Supply Connection and External Flexible Cords : Resistance of supply wires )	-	0	Testing charges included in Cl. 25.1
Cl.25.7 of IS:302-2-30:2007(Supply Connection and External Flexible Cords : Supply cords material )	-	0	Testing charges included in Cl. 25.1
Cl.25.5 of 302-1:2008(Supply Connection and External Flexible Cords : Type of attachments )	-	0	Testing charges included in Cl. 25.1
Cl.25.1 of 302-1:2008(Supply Connection and External Flexible Cords : Means of connection )	-	0	Testing charges included in Cl. 25.1
Cl.24 of IS:302-2-30:2007(Component)	-	0	Testing charges included in Cl. 24
Cl.23.7 of 302-1:2008(Internal Wiring : Colour of earting conductor )	-	0	Testing charges included in Cl. 23
Cl.23 of IS:302-1:2008(Internal Wiring )	-	0	Testing charges included in Cl. 23
Cl.22.106 of IS:302-2-30:2007(Construction : Checking of thermostats, timers or similar means for visibl glowing radiant heaters)	-	0	Testing charges included in Cl. 22.1
Cl.22.106 of IS:302-2-30:2007(Construction : Checking of openings on the underside)	-	0	Testing charges included in Cl. 22.1
Cl.22.102 & Cl 22.103 of IS:302-2-30:2007(Construction : Fireguard )	-	0	Testing charges included in Cl. 22.1
Cl.22.101 of IS:302-2-30:2007(Construction : Prevention to contact with heating element)	-	0	Testing charges included in Cl. 22.1
Cl.22.24 of IS:302-2-30:2007(Construction : test of bare heating element)	-	0	Testing charges included in Cl. 22.1
Cl.22.18 of IS 302-1:2008(Construction : Resistance to corrosion )	-	0	Testing charges included in Cl. 22.1
Cl.22.15 of IS 302-1:2008(Construction : Storage hooks for flexible cords)	-	0	Testing charges included in Cl. 22.1
Cl.22.14 of IS 302-1:2008(Construction : ragged and sharp edges)	-	0	Testing charges included in Cl. 22.1
Cl.22.13 of IS 302-1:2008(Construction : Position of handles )	-	0	Testing charges included in Cl. 22.1
Cl.22.12 of IS 302-1:2008(Construction : Fixing of Handle, knobs,grips,lever and similer parts )	-	0	Testing charges included in Cl. 22.1
Cl.22.11 of IS 302-1:2008(Construction : Fixing of non detachable parts )	-	0	Testing charges included in Cl. 22.1
Cl.22.7 of IS:302-2-30:2007(Construction : Pressure test of oil heater )	-	0	Testing charges included in Cl. 22.1
Cl.21.101 of IS:302-2-30:2007(Mechanical Strength : fire gaurd deformation test )	-	0	Testing charges included in Cl. 21
Cl.21.2 of IS 302-1:2008(Mechanical Strength : Pentration by sharp implementation )	-	0	Testing charges included in Cl. 21
Cl.21.1 of IS:302-1:2008)(Mechanical Strength : Rough handling )	-	0	Testing charges included in Cl. 21
Cl.20 of IS:302-2-30:2007(Stability of Mechanical Hazards)	-	0	Testing charges included in Cl. 20
Cl.19.114 of IS:302-2-30:2007(Abnormal Operation : the temp. of the surface of the container for oil heaters )	-	0	Testing charges included in Cl. 19
Cl.19.112 of IS:302-2-30:2007(Abnormal Operation : Ignition of bleached cotton gauge)	-	0	Testing charges included in Cl. 19
Cl.19.111 of IS:302-2-30:2007(Abnormal Operation : Ignition of flannelette for Visibly glowing heaters)	-	0	Testing charges included in Cl. 19
Cl.19.110 of IS:302-2-30:2007(Abnormal Operation : operation against wall for visibly glowing radiant heaters )	-	0	Testing charges included in Cl. 19
Cl.19.109 of IS:302-2-30:2007(Abnormal Operation : operation against wall for fan heater )	-	0	Testing charges included in Cl. 19
Cl.19.106 of IS:302-2-30:2007(Abnormal Operation : Locked rotor of fan hetear )	-	0	Testing charges included in Cl. 19
Cl.19.103 , Cl 19.104 of IS:302-2-30:2007(Abnormal Operation : Operation after Covering by cotton)	-	0	Testing charges included in Cl. 19
Cl.19 of IS:302-2-30:2007(Abnormal Operation : High Voltage )	-	0	Testing charges included in Cl. 19
Cl.19 of IS:302-2-30:2007(Abnormal Operation : temp rise of supply cord )	-	0	Testing charges included in Cl. 19
Cl.19 of IS:302-2-30:2007(Abnormal Operation : Temp rise of test corner )	-	0	Testing charges included in Cl. 19
Cl.19 of IS:302-1:2008(Abnormal Operation : Emission of molten or poisonous or ignitable gas)	-	0	Testing charges included in Cl. 19
Cl.16 of IS:302-1:2008(Leakage current and Electric strength (After humidity): Electric Strentgh )	-	0	Testing charges included in Cl. 16
Cl.16 of IS:302-1:2008(Leakage current and Electric strength (After humidity): Leakage current )	-	0	Testing charges included in Cl. 16
Cl.15 of IS 302-1:2008(Moisture Resistance )	-	0	Testing charges included in Cl. 15
Cl.14 of IS:302-1:2008(Transient Over Voltages)	-	0	Testing charges included in Cl. 14
Cl.13 of IS:302-1:2008(Leakage Current of Electric Strength at operating temp. )	-	0	Testing charges included in Cl. 13
Cl.13 of IS:302-1:2008(Leakage Current of Electric Strength at operating temp. )	-	0	Testing charges included in Cl. 13
Cl.11 of IS:302-2:30: 2007(Heating : Room temperature)	-	0	Testing charges included in Cl. 11
Cl.11.8 of IS:302-2:30: 2007(Heating : For liquid filled radiators the temp. rise of the outer surface of the liquid container)	-	0	Testing charges included in Cl. 11
Cl.11 of IS:302-2:30: 2007(Heating : Temperature rise in winding)	-	0	Testing charges included in Cl. 11
Cl.11 of IS:302-2:30: 2007(Heating : Air-outlet grills)	-	0	Testing charges included in Cl. 11
Cl.11 of IS:302-2:30: 2007(Heating : Surfaces of handles, knobs, grips and similar parts)	-	0	Testing charges included in Cl. 11
Cl.11 of IS:302-2:30: 2007(Heating : Wooden supports, walls, ceiling and floor of the test corner)	-	0	Testing charges included in Cl. 11
Cl.11 of IS:302-2:30: 2007(Heating : PVC Insulation )	-	0	Testing charges included in Cl. 11
Cl.10 of IS:302-1:2008(Power Input and Current)	-	0	Testing charges included in Cl. 10
Cl.8 of IS:302-1:2008(Protection Against Access to Live Parts)	-	0	Testing charges included in Cl. 8
Cl.7.101 of IS:302-2:30: 2007(Marking and Instructions : standard mark. )	-	0	Testing charges included in Cl. 7
Cl.7.15 of IS 302-1:2008(Marking and Instructions : Visibility of marking concerning covering)	-	0	Testing charges included in Cl. 7
Cl.7.15 of IS 302-1:2008(Marking and Instructions : discernibility from the out side )	-	0	Testing charges included in Cl. 7
Cl.7.14 of IS:302-2:30: 2007(Marking and Instructions : Height of “Do not cover”)	-	0	Testing charges included in Cl. 7
Cl.7.14 of IS:302-2:30: 2007(Marking and Instructions : height of symbol)	-	0	Testing charges included in Cl. 7
Cl.7.14 of IS302-1:2008(Marking and Instructions : Legibility and durability )	-	0	Testing charges included in Cl. 7
Cl.7.13 of IS 302-1:2008(Marking and Instructions : Languge of instruction and texts )	-	0	Testing charges included in Cl. 7
Cl.7.11 of IS :302-1:2008(Marking and Instructions : Controls )	-	0	Testing charges included in Cl. 7
Cl.7.9 of IS :302-1:2008(Marking and Instructions : switches )	-	0	Testing charges included in Cl. 7
Cl.7.8 of IS :302-1:2008(Marking and Instructions : terminals )	-	0	Testing charges included in Cl. 7
Cl.7.6 of IS:302-1:2008(Marking and Instructions : Symbols )	-	0	Testing charges included in Cl. 7
Cl.7.5 of IS:302-1:2008(Marking and Instructions : upper of lower limit of the rated power input )	-	0	Testing charges included in Cl. 7
Cl 7.1 & Cl.7.6 of IS:302-2:30: 2007(Marking and Instructions : Do not cover )	-	0	Testing charges included in Cl. 7
Cl.7.1 of IS:302-1:2008(Marking and Instructions : Country of manufacture )	-	0	Testing charges included in Cl. 7
Cl.7.1 of IS:302-1:2008(Marking and Instructions : Symbol for Class-II )	-	0	Testing charges included in Cl. 7
Cl.7.1 of IS:302-1:2008(Marking and Instructions : Model or type )	-	0	Testing charges included in Cl. 7
Cl.7.1 of IS:302-1:2008(Marking and Instructions : Name , trade-mark or identification mark of the manufacturer )	-	0	Testing charges included in Cl. 7
Cl.7.1 of IS:302-1:2008(Marking and Instructions : rated power input )	-	0	Testing charges included in Cl. 7
Cl.7.1 of IS:302-1:2008(Marking and Instructions : Nature of supply )	-	0	Testing charges included in Cl. 7
Cl.7.1 of IS:302-1:2008(Marking and Instructions : Rated Voltage )	-	0	Testing charges included in Cl. 7
Cl.22.15 of IS 302-1:2008(Construction)	-	0	Testing charges included in Cl. 7

31 Dec, 2026

-
Included w.e.f.20.06.2025 Exclusion (EMI/EMC)Cl 19.11.4.1 TO Cl 19.11.4.7

IS 368 (2014)

Electric immersion water heaters - Specification (Fifth Revision)

65000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.6 of IS 302-‐2-‐201:2008(Classification)	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	2000	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	Testing charges included in Cl. 7
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	Testing charges included in Cl. 7
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	Testing charges included in Cl. 7
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	Testing charges included in Cl. 7
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	Testing charges included in Cl. 7
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	Testing charges included in Cl. 7
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	Testing charges included in Cl. 7
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	Testing charges included in Cl. 7
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	Testing charges included in Cl. 7
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	Testing charges included in Cl. 7
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	Testing charges included in Cl. 7
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	Testing charges included in Cl. 7
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	Testing charges included in Cl. 7
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	Testing charges included in Cl. 7
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	Testing charges included in Cl. 7
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	Testing charges included in Cl. 7
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	Testing charges included in Cl. 7
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	Testing charges included in Cl. 7
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	Testing charges included in Cl. 7
Cl.8 of IS 302‐2-201: 2008(Protection Against Access to Live Parts)	-	2000	-
Cl.10 of IS 302‐2‐201:2008(Power Input and Current )	-	2000	-
Cl.11 of IS 302-2201: 2008(Heating)	-	4000	-
Cl.11 of IS 302-2201: 2008(Heating)	-	0	Testing charges included in Cl. 11
Cl.11 of IS 302-2201: 2008(Heating)	-	0	Testing charges included in Cl. 11
Cl.11 of IS 302-2201: 2008(Heating)	-	0	Testing charges included in Cl. 11
Cl.11 of IS 302-2201: 2008(Heating)	-	0	Testing charges included in Cl. 11
Cl.11 of IS 302-2201: 2008(Heating)	-	0	Testing charges included in Cl. 11
Cl.11 of IS 302-2201: 2008(Heating)	-	0	Testing charges included in Cl. 11
Cl.11 of IS 302-2201: 2008(Heating)	-	0	Testing charges included in Cl. 11
Cl.11 of IS 302-2201: 2008(Heating)	-	0	Testing charges included in Cl. 11
Cl.11 of IS 302-2201: 2008(Heating)	-	0	Testing charges included in Cl. 11
Cl.11 of IS 302-2201: 2008(Heating)	-	0	Testing charges included in Cl. 11
Cl. 12 of IS 368:2014(Operation under overload conditions of appliances with heating elements)	-	2000	-
Cl.13 of IS 302-2-201: 2008(Leakage Current & Electric Strength at Operating Temperature)	-	3000	-
Cl.13 of IS 302-2-201: 2009(Leakage Current & Electric Strength at Operating Temperature)	-	0	Testing charges included in Cl. 13
Cl.14 of IS 302‐2-201:2008(Transient Over Voltages )	-	2000	-
Cl.15 of IS 302-2-201:2008(Moisture Resistance )	-	4000	-
Cl.15 of IS 302-2-201:2008(Moisture Resistance )	-	0	Testing charges included in Cl. 15
Cl.16 of IS 302-2-201:2008(Leakage Current & Electric Strength)	-	3000	-
Cl.16 of IS 302-2-201:2008(Leakage Current & Electric Strength)	-	0	Testing charges included in Cl. 16
Cl.17 of IS 302‐2-201: 2008(Overload Protection of Transformers & Associated Circuits)	-	4000	-
Cl.18 of IS 368:2014(Endurance)	-	5000	-
Cl.19 of IS 302‐2-201: 2008(Abnormal Operation )	-	6000	-
Cl.19 of IS 302‐2-201: 2008(Abnormal Operation )	-	0	Testing charges included in Cl. 19
Cl.19 of IS 302‐2-201: 2008(Abnormal Operation )	-	0	Testing charges included in Cl. 19
Cl.19 of IS 302‐2-201: 2008(Abnormal Operation )	-	0	Testing charges included in Cl. 19
Cl.19 of IS 302‐2-201: 2008(Abnormal Operation )	-	0	Testing charges included in Cl. 19
Cl.20 of IS 302-2-201: 2008(Stability & Mechanical Hazards)	-	2000	-
Cl.21 of IS 302-2-201: 2008(Mechanical Strength )	-	2000	-
Cl.21 of IS 302-2-201: 2008(Mechanical Strength )	-	0	Testing charges included in Cl. 21
Cl.21 of IS 302-2-201: 2008(Mechanical Strength )	-	0	Testing charges included in Cl. 21
Cl.22 of IS 302-2-201: 2008(Construction)	-	5000	-
Cl.22 of IS 302-2-201: 2008(Construction)	-	0	Testing charges included in Cl. 22
Cl.22 of IS 302-2-201: 2008(Construction)	-	0	Testing charges included in Cl. 22
Cl.22 of IS 302-2-201: 2008(Construction)	-	0	Testing charges included in Cl. 22
Cl.23 of 302-2-201:2008(Internal Wiring )	-	2000	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	0	Testing charges included in Cl. 23
Cl.23 of 302-2-201:2008(Internal Wiring )	-	0	Testing charges included in Cl. 23
Cl.23 of 302-2-201:2008(Internal Wiring )	-	0	Testing charges included in Cl. 23
Cl.23 of 302-2-201:2008(Internal Wiring )	-	0	Testing charges included in Cl. 23
Cl.23 of 302-2-201:2008(Internal Wiring )	-	0	Testing charges included in Cl. 23
Cl.23 of 302-2-201:2008(Internal Wiring )	-	0	Testing charges included in Cl. 23
Cl.23 of 302-2-201:2008(Internal Wiring )	-	0	Testing charges included in Cl. 23
Cl.23 of 302-2-201:2008(Internal Wiring )	-	0	Testing charges included in Cl. 23
Cl.24 of IS 302-2-201: 2008(Component)	-	3000	-
Cl.24 of IS 302-2-201: 2008(Component)	-	0	Testing charges included in Cl. 24
Cl.24 of IS 302-2-201: 2008(Component)	-	0	Testing charges included in Cl. 24
Cl.24 of IS 302-2-201: 2008(Component)	-	0	Testing charges included in Cl. 24
Cl.24 of IS 302-2-201: 2008(Component)	-	0	Testing charges included in Cl. 24
Cl.24 of IS 302-2-201: 2008(Component)	-	0	Testing charges included in Cl. 24
Cl.24 of IS 302-2-201: 2008(Component)	-	0	Testing charges included in Cl. 24
Cl.24 of IS 302-2-201: 2008(Component)	-	0	Testing charges included in Cl. 24
Cl.24 of IS 302-2-201: 2008(Component)	-	0	Testing charges included in Cl. 24
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	Testing charges included in Cl. 25
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	Testing charges included in Cl. 25
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	Testing charges included in Cl. 25
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	Testing charges included in Cl. 25
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	Testing charges included in Cl. 25
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	Testing charges included in Cl. 25
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	Testing charges included in Cl. 25
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	Testing charges included in Cl. 25
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	Testing charges included in Cl. 25
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	Testing charges included in Cl. 25
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	Testing charges included in Cl. 25
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	Testing charges included in Cl. 25
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	Testing charges included in Cl. 25
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	Testing charges included in Cl. 25
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	Testing charges included in Cl. 25
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	Testing charges included in Cl. 25
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	Testing charges included in Cl. 25
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	Testing charges included in Cl. 25
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	Testing charges included in Cl. 25
Cl.26 of IS 302-2-201: 2008(Terminals for External Conductors)	-	1000	-
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	2000	-
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	0	Testing charges included in Cl. 27
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	0	Testing charges included in Cl. 27
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	0	Testing charges included in Cl. 27
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	0	Testing charges included in Cl. 27
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	0	Testing charges included in Cl. 27
Cl.28 of IS 302-2-201: 2008(Screws & Connections )	-	1000	-
Cl.29 of IS 302-2‐201:2008(Clearances, Creepage Distances and Solid Insulation )	-	2000	-
Cl.29 of IS 302-2‐201:2008(Clearances, Creepage Distances and Solid Insulation )	-	0	Testing charges included in Cl. 29
Cl.30 of IS 302-2‐201:2008(Resistance to Heat and Fire )	-	3000	-
Cl.30 of IS 302-2‐201:2008(Resistance to Heat and Fire )	-	0	Testing charges included in Cl. 30
Cl.31 of IS 302-2-201:2008(Resistance of Rusting )	-	2000	-
Cl.32 of IS 302-2-201:2008(Radiation, Toxicity and Similar Hazards)	-	0	-
4(GENERAL REQUIREMENT)	-	0	-
5(GENERAL CONDITIONS FOR THE TESTS)	-	0	-

31 Dec, 2026

-
Included w.e.f.20.06.2025 Exclusion (EMI/EMC)Cl 19.11.4.1 TO Cl 19.11.4.7

IS 302 : Part 2 : Sec 209 (1994)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 209 low speed food grinding machines

58000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 32 302-2-209 : 1994(Radiation Hazards)	-	0	-
Cl. 31 302-2-209 : 1994(Resistance to Rusting)	-	0	-
Cl. 30 302-2-209 : 1994(Resistance to Heat Fire & Tracking )	-	3000	-
Cl. 29 302-2-209 : 1994(Clearances, Creepage Distances & Solid insulation )	-	2000	-
Cl. 28 302-2-209 : 1994(Screws & Connections)	-	1000	-
Cl. 27 302-2-209 : 1994(Provision for Earthing )	-	2000	-
Cl. 26 302-2-209 : 1994(Terminals for External conductors )	-	1000	-
Cl. 25 302-2-209 : 1994(Supply Connection & External Flexible Cords)	-	2000	-
Cl. 24 302-2-209 : 1994(Components)	-	3000	-
Cl. 23 302-2-209 : 1994(Internal Wiring)	-	2000	-
Cl. 22 302-2-209 : 1994(Construction )	-	5000	-
Cl. 21 302-2-209 : 1994(Mechanical strength)	-	2000	-
Cl. 20 302-2-209 : 1994(Stability & Mechanical Hazards)	-	2000	-
Cl. 19 302-2-209 : 1994(Abnormal Operation )	-	5000	-
Cl. 18 302-2-209 : 1994(Endurance)	-	0	-
Cl. 17 302-2-209 : 1994(Overload Protection of Transformers and Associated Circuit)	-	4000	-
Cl. 16 302-2-209 : 1994(Leakage Current & Electric Strength at Operating Temperature (After Humidity Treatment))	-	3000	-
Cl. 15 302-2-209 : 1994(Moisture Resistance Test )	-	4000	-
Cl. 14 302-2-209 : 1994(Radio and television interference suppression / Transient over voltages)	-	2000	-
Cl. 13 302-2-209 : 1994(Leakage Current & Electric Strength at Operating Temperature)	-	3000	-
Cl. 11 302-2-209 : 1994(Temperature Rise)	-	4000	-
Cl. 10 302-2-209 : 1994(Power Input and Current )	-	2000	-
Cl. 9 302-2-209 : 1994(Starting of motor operated appliances)	-	0	-
Cl. 8 302-2-209 : 1994(Protection Against Electric Shock )	-	2000	-
Cl. 7 302-2-209 : 1994(Marking)	-	2000	-
(CI. 6 IS 302-2-209 : 1994(Classification )	-	0	-
Cl. 5 IS 302-2-209 :1994(Rating)	-	0	-

31 Dec, 2026

-
Included w.e.f.20.06.2025 Exclusion (EMI/EMC)Cl 19.11.4.1 TO Cl 19.11.4.7

IS 302 : Part 2 : Sec 202 (1992)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 202 electric stoves

53000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Classification- IS 302-1 )	-	0	-
6(Classification- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	2000	-
7.1(Marking- IS 302-1)	-	0	Testing charges included in Cl. 7.1
7.1(Marking- IS 302-1)	-	0	Testing charges included in Cl. 7.1
7.1(Marking- IS 302-1)	-	0	Testing charges included in Cl. 7.1
7.1(Marking- IS 302-1)	-	0	Testing charges included in Cl. 7.1
7.1(Marking- IS 302-1)	-	0	Testing charges included in Cl. 7.1
7.1(Marking- IS 302-1)	-	0	Testing charges included in Cl. 7.1
7.1(Marking- IS 302-1)	-	0	Testing charges included in Cl. 7.1
7.1(Marking- IS 302-1)	-	0	Testing charges included in Cl. 7.1
7.3(Marking- IS 302-1)	-	0	Testing charges included in Cl. 7.1
7.4(Marking- IS 302-1)	-	0	Testing charges included in Cl. 7.1
7.6(Marking- IS 302-1)	-	0	Testing charges included in Cl. 7.1
7.11(Marking- IS 302-1)	-	0	Testing charges included in Cl. 7.1
7.12(Marking- IS 302-1)	-	0	Testing charges included in Cl. 7.1
7.13(Marking- IS 302-1)	-	0	Testing charges included in Cl. 7.1
7.14(Marking- IS 302-1)	-	0	Testing charges included in Cl. 7.1
7.15(Marking- IS 302-1)	-	0	Testing charges included in Cl. 7.1
7.101(Marking)	-	0	Testing charges included in Cl. 7.1
8( Protection Against Electric Shock, IS 302-1)	-	2000	-
10(Power Input and Current, IS 302-1)	-	2000	-
11(Heating, IS 302-1)	-	4000	-
11(Heating, IS 302-1)	-	0	Testing charges included in Cl. 11
11(Heating, IS 302-1)	-	0	Testing charges included in Cl. 11
11(Heating, IS 302-1)	-	0	Testing charges included in Cl. 11
11(Heating, IS 302-1)	-	0	Testing charges included in Cl. 11
11(Heating, IS 302-1)	-	0	Testing charges included in Cl. 11
11(Heating, IS 302-1)	-	0	Testing charges included in Cl. 11
12(Operation under overload conditions of appliances with heating elements, IS 302-2-202: 1992)	-	0	-
13(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	3000	-
13(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	0	Testing charges included in Cl. 13
15.1(Moisture Resistance, IS 302-1)	-	4000	-
15.3(Moisture Resistance, IS 302-1)	-	0	Testing charges included in Cl. 15.1
16(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	3000	-
16(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	0	Testing charges included in Cl. 16
19.2(Abnormal Operation, IS 302-1)	-	5000	-
19.2(Abnormal Operation, IS 302-1)	-	0	Testing charges included in Cl. 19.2
19.3(Abnormal Operation, IS 302-1)	-	0	Testing charges included in Cl. 19.2
19.3(Abnormal Operation, IS 302-1)	-	0	Testing charges included in Cl. 19.2
20.1(Stability & Mechanical Hazards, IS 302-1)	-	2000	-
21.1(Mechanical Strength, IS 302-1 & IS 302-2-202)	-	1500	-
22(Construction, IS 302-1)	-	5000	-
22.101(Construction)	-	0	Testing charges included in Cl. 22
22.102(Construction)	-	0	Testing charges included in Cl. 22
22.103(Construction)	-	0	Testing charges included in Cl. 22
22.104(Construction)	-	0	Testing charges included in Cl. 22
22.105(Construction)	-	0	Testing charges included in Cl. 22
22.105.1(Construction)	-	0	Testing charges included in Cl. 22
22.105.2(Construction)	-	0	Testing charges included in Cl. 22
22.106(Construction)	-	0	Testing charges included in Cl. 22
22.107(Construction)	-	0	Testing charges included in Cl. 22
11.107.1(Construction)	-	0	Testing charges included in Cl. 22
23.1(Internal Wiring, IS 302-1)	-	2000	-
23.2(Internal Wiring, IS 302-1)	-	0	Testing charges included in Cl. 23.1
23.8(Internal Wiring, IS 302-1)	-	0	Testing charges included in Cl. 23.1
23.9(Internal Wiring, IS 302-1)	-	0	Testing charges included in Cl. 23.1
23.10(Internal Wiring, IS 302-1)	-	0	Testing charges included in Cl. 23.1
24.1(Components, IS 302-1)	-	3000	-
24.2(Components, IS 302-1)	-	0	Testing charges included in Cl. 24.1
24.101(Components)	-	0	Testing charges included in Cl. 24.1
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	2000	-
25.4(Supply Connection and External Flexible Cords)	-	0	Testing charges included in Cl. 25.1
25.5(Supply Connection and External Flexible Cords, IS 302-1)	-	0	Testing charges included in Cl. 25.1
25.6(Supply Connection and External Flexible Cords, IS 302-1)	-	0	Testing charges included in Cl. 25.1
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	0	Testing charges included in Cl. 25.1
26.9(Supply Connection and External Flexible Cords, IS 302-1)	-	0	Testing charges included in Cl. 26
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	0	Testing charges included in Cl. 25.1
25.11(Supply Connection and External Flexible Cords, IS 302-1)	-	0	Testing charges included in Cl. 25.1
25.12(Supply Connection and External Flexible Cords, IS 302-1)	-	0	Testing charges included in Cl. 25.1
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	0	Testing charges included in Cl. 25.1
25.16(Supply Connection and External Flexible Cords, IS 302-1)	-	0	Testing charges included in Cl. 25.1
25.17(Supply Connection and External Flexible Cords, IS 302-1)	-	0	Testing charges included in Cl. 25.1
25.18(Supply Connection and External Flexible Cords, IS 302-1)	-	0	Testing charges included in Cl. 25.1
25.19(Supply Connection and External Flexible Cords, IS 302-1)	-	0	Testing charges included in Cl. 25.1
25.2(Supply Connection and External Flexible Cords, IS 302-1)	-	0	Testing charges included in Cl. 25.1
25.21(Supply Connection and External Flexible Cords, IS 302-1)	-	0	Testing charges included in Cl. 25.1
25.22(Supply Connection and External Flexible Cords, IS 302-1)	-	0	Testing charges included in Cl. 25.1
26(Terminals for External Conductors, IS 302-1)	-	1000	-
27.1(Provision for Earthing, IS 302-1)	-	2000	-
27.2(Provision for Earthing, IS 302-1)	-	0	Testing charges included in Cl. 27.1
27.3(Provision for Earthing, IS 302-1)	-	0	Testing charges included in Cl. 27.1
27.4(Provision for Earthing, IS 302-1)	-	0	Testing charges included in Cl. 27.1
27.5(Provision for Earthing, IS 302-1)	-	0	Testing charges included in Cl. 27.1
28(Screws & Connections, IS 302-1)	-	1000	-
29.1(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	2000	-
29.2(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	0	Testing charges included in Cl. 29.1
30.1(Resistance to Heat, Fire & Tracking, IS 302-1)	-	1000	-
30.2(Resistance to Heat, Fire & Tracking, IS 302-1)	-	2000	-
31(Resistance of Rusting, IS 302-1)	-	0	-

31 Dec, 2026

-
Included w.e.f.20.06.2025 Exclusion (EMI/EMC)Cl 19.11.4.1 TO Cl 19.11.4.7

IS 302 : Part 2 : Sec 201 (2008)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 201 electric immersion water heaters (First Revision)

57000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.6 of IS 302-‐2-‐201:2008(Classification)	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	2000	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	Test charges included in Cl.7
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	Test charges included in Cl.7
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	Test charges included in Cl.7
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	Test charges included in Cl.7
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	Test charges included in Cl.7
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	Test charges included in Cl.7
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	Test charges included in Cl.7
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	Test charges included in Cl.7
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	Test charges included in Cl.7
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	Test charges included in Cl.7
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	Test charges included in Cl.7
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	Test charges included in Cl.7
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	Test charges included in Cl.7
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	Test charges included in Cl.7
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	Test charges included in Cl.7
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	Test charges included in Cl.7
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	Test charges included in Cl.7
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	Test charges included in Cl.7
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	Test charges included in Cl.7
Cl.8 of IS 302‐2-201: 2008(Protection Against Access to Live Parts)	-	2000	-
Cl.10 of IS 302‐2‐201:2008(Power Input and Current )	-	2000	-
Cl.11 of IS 302-2201: 2008(Heating)	-	4000	-
Cl.11 of IS 302-2201: 2008(Heating)	-	0	Test charges included in Cl.11
Cl.11 of IS 302-2201: 2008(Heating)	-	0	Test charges included in Cl.11
Cl.11 of IS 302-2201: 2008(Heating)	-	0	Test charges included in Cl.11
Cl.11 of IS 302-2201: 2008(Heating)	-	0	Test charges included in Cl.11
Cl.11 of IS 302-2201: 2008(Heating)	-	0	Test charges included in Cl.11
Cl.11 of IS 302-2201: 2008(Heating)	-	0	Test charges included in Cl.11
Cl.11 of IS 302-2201: 2008(Heating)	-	0	Test charges included in Cl.11
Cl.11 of IS 302-2201: 2008(Heating)	-	0	Test charges included in Cl.11
Cl.11 of IS 302-2201: 2008(Heating)	-	0	Test charges included in Cl.11
Cl.11 of IS 302-2201: 2008(Heating)	-	0	Test charges included in Cl.11
Cl.13 of IS 302-2-201: 2008(Leakage Current & Electric Strength at Operating Temperature)	-	3000	-
Cl.14 of IS 302‐2-201:2008(Transient Over Voltages )	-	2000	-
Cl.15 of IS 302-2-201:2008(Moisture Resistance )	-	4000	-
Cl.15 of IS 302-2-201:2008(Moisture Resistance )	-	0	Test charges included in Cl.15
Cl.16 of IS 302-2-201:2008(Leakage Current & Electric Strength)	-	3000	-
Cl.16 of IS 302-2-201:2008(Leakage Current & Electric Strength)	-	0	Test charges included in Cl.16
Cl.17 of IS 302‐2-201: 2008(Overload Protection of Transformers & Associated Circuits)	-	4000	-
Cl.19 of IS 302‐2-201: 2008(Abnormal Operation )	-	5000	-
Cl.19 of IS 302‐2-201: 2008(Abnormal Operation )	-	0	Test charges included in Cl.15
Cl.19 of IS 302‐2-201: 2008(Abnormal Operation )	-	0	Test charges included in Cl.15
Cl.19 of IS 302‐2-201: 2008(Abnormal Operation )	-	0	Test charges included in Cl.15
Cl.20 of IS 302-2-201: 2008(Stability & Mechanical Hazards)	-	2000	-
Cl.21 of IS 302-2-201: 2008(Mechanical Strength )	-	2000	-
Cl.21 of IS 302-2-201: 2008(Mechanical Strength )	-	0	Test charges included in Cl.21
Cl.21 of IS 302-2-201: 2008(Mechanical Strength )	-	0	Test charges included in Cl.21
Cl.22 of IS 302-2-201: 2008(Construction)	-	5000	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	2000	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	0	Test charges included in Cl.23
Cl.23 of 302-2-201:2008(Internal Wiring )	-	0	Test charges included in Cl.23
Cl.23 of 302-2-201:2008(Internal Wiring )	-	0	Test charges included in Cl.23
Cl.23 of 302-2-201:2008(Internal Wiring )	-	0	Test charges included in Cl.23
Cl.23 of 302-2-201:2008(Internal Wiring )	-	0	Test charges included in Cl.23
Cl.23 of 302-2-201:2008(Internal Wiring )	-	0	Test charges included in Cl.23
Cl.23 of 302-2-201:2008(Internal Wiring )	-	0	Test charges included in Cl.23
Cl.23 of 302-2-201:2008(Internal Wiring )	-	0	Test charges included in Cl.23
Cl.24 of IS 302-2-201: 2008(Component)	-	3000	-
Cl.24 of IS 302-2-201: 2008(Component)	-	0	Test charges included in Cl.24
Cl.24 of IS 302-2-201: 2008(Component)	-	0	Test charges included in Cl.24
Cl.24 of IS 302-2-201: 2008(Component)	-	0	Test charges included in Cl.24
Cl.24 of IS 302-2-201: 2008(Component)	-	0	Test charges included in Cl.24
Cl.24 of IS 302-2-201: 2008(Component)	-	0	Test charges included in Cl.24
Cl.24 of IS 302-2-201: 2008(Component)	-	0	Test charges included in Cl.24
Cl.24 of IS 302-2-201: 2008(Component)	-	0	Test charges included in Cl.24
Cl.24 of IS 302-2-201: 2008(Component)	-	0	Test charges included in Cl.24
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	2000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	Test charges included in Cl.25
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	Test charges included in Cl.25
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	Test charges included in Cl.25
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	Test charges included in Cl.25
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	Test charges included in Cl.25
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	Test charges included in Cl.25
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	Test charges included in Cl.25
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	Test charges included in Cl.25
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	Test charges included in Cl.25
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	Test charges included in Cl.25
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	Test charges included in Cl.25
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	Test charges included in Cl.25
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	Test charges included in Cl.25
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	Test charges included in Cl.25
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	Test charges included in Cl.25
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	Test charges included in Cl.25
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	Test charges included in Cl.25
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	Test charges included in Cl.25
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	Test charges included in Cl.25
Cl.26 of IS 302-2-201: 2008(Terminals for External Conductors)	-	1000	-
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	2000	-
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	0	Test charges included in Cl.27
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	0	Test charges included in Cl.27
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	0	Test charges included in Cl.27
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	0	Test charges included in Cl.27
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	0	Test charges included in Cl.27
Cl.28 of IS 302-2-201: 2008(Screws & Connections )	-	1000	-
Cl.29 of IS 302-2‐201:2008(Clearances, Creepage Distances and Solid Insulation )	-	2000	-
Cl.30 of IS 302-2‐201:2008(Resistance to Heat and Fire )	-	3000	-
Cl.31 of IS 302-2-201:2008(Resistance of Rusting )	-	0	-
Cl.32 of IS 302-2-201:2008(Radiation, Toxicity and Similar Hazards)	-	0	-
4(GENERAL REQUIREMENTS)	-	0	-
5(GENERAL CONDITIONS FOR THE TESTS)	-	0	-

31 Dec, 2026

-
Included w.e.f.20.06.2025 Exclusion (EMI/EMC)Cl 19.11.4.1 TO Cl 19.11.4.7

IS 302 : Part 2 : Sec 45 (1994)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 45 electric heating tools

56000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Rating)	-	0	-
6(Classification)	-	0	-
7(Marking)	-	2000	-
8(Protection against Access to Live Parts)	-	2000	-
9(Starting Of Motor Operated Appliances)	-	0	-
10("Power Input & Current")	-	2000	-
11(Temperature Rise/ Heating)	-	4000	-
12(Operation Under Overload Condition)	-	1000	-
13(Electric Insulation at Operating Temperature)	-	3000	-
14("Radio and Television Interference Suppression / Transient Over Voltage ")	-	0	-
15(Moisture Resistance)	-	4000	-
16(Insulation Resistance and Electric Strength/ Leakage Current and Electric Strength (After Humidity Treatment))	-	3000	-
17(Overload Protection/ Overload Protection of Transformers & Associated Circuits)	-	4000	-
18(Endurance)	-	0	-
19(Abnormal Operation)	-	5000	-
20(Stability & Mechanical Hazards)	-	2000	-
21(Mechanical strength)	-	2000	-
22(Construction)	-	5000	-
23(Internal Wiring)	-	2000	-
24(Components)	-	3000	-
25(Supply Connection & External Flexible Cords)	-	2000	-
26(Terminals For External Conductors)	-	1000	-
27(Provision For Earthing)	-	2000	-
28(Screws & Connections)	-	1000	-
29(Creepage Distances & Clearances)	-	2000	-
30(Resistance to Heat, Fire and Tracking)	-	3000	-
31(Radiation hazards)	-	0	-
XXV of Table 101(Resistance to Rusting)	-	0	-
4(General Requirement)	-	0	-

31 Dec, 2026

-
Included w.e.f.20.06.2025 Exclusion (EMI/EMC)Cl 19.11.4.1 TO Cl 19.11.4.7

IS 302 : Part 2 : Sec 35 (2017)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 35 electric instantaneous water heaters (Second Revision)

60000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.32(Verification)	-	0	Repeated clause
Cl.31(Verification)	-	0	Repeated clause
Cl.30(Verification)	-	0	Repeated clause
CL.29(Verification)	-	0	Repeated clause
Cl.28(Verification)	-	0	Repeated clause
Cl.27(Verification)	-	0	Repeated clause
Cl.26(Verification)	-	0	Repeated clause
Cl.25(Verification)	-	0	Repeated clause
Cl.24(Verification)	-	0	Repeated clause
Cl.23(Verification)	-	0	Repeated clause
Cl.22(Verification)	-	0	Repeated clause
Cl.21(Verification)	-	0	Repeated clause
Cl.20(Verification)	-	0	Repeated clause
Cl.19(Verification)	-	0	Repeated clause
Cl.17(Verification)	-	0	Repeated clause
Cl. 16(Verification)	-	0	Repeated clause
Cl.15(Verification)	-	0	Repeated clause
Cl.14(Verification)	-	0	Repeated clause
Cl.13(Verification)	-	0	Repeated clause
Cl.11(Verification)	-	0	Repeated clause
Cl.10(Verification)	-	0	Repeated clause
Cl.8(Verification)	-	0	Repeated clause
Cl. 7(Verification)	-	0	Repeated clause
Cl. 7(Verification)	-	0	Repeated clause
Cl. 32 IS 302-2-35(Radiation, Toxicity and similar hazards)	-	0	-
Cl. 31 IS 302-2-35(Resistance to Rusting)	-	0	-
Cl. 30 IS 302-2-35(Resistance to Heat Fire & Tracking )	-	3000	-
Cl. 29 IS 302-2-35(Clearances, Creepage Distances & Solid insulation )	-	2000	-
Cl. 28 IS 302-2-35(Screws & Connections)	-	1000	-
Cl. 27 IS 302-2-35(Provision for Earthing )	-	2000	-
Cl. 26 IS 302-2-35(Terminals for External conductors )	-	1000	-
Cl. 25 IS 302-2-35(Supply Connection & External Flexible Cords)	-	2000	-
Cl. 24 IS 302-2-35(Components)	-	3000	-
Cl. 23 IS 302-2-35(Internal Wiring)	-	2000	-
Cl. 22 IS 302-2-35(Construction )	-	8000	-
Cl. 21 IS 302-2-35(Mechanical strength)	-	2000	-
Cl. 20 IS 302-2-35(Stability & Mechanical Hazards)	-	2000	-
Cl. 19 IS 302-2-35(Abnormal Operation )	-	5000	-
Cl. 18 IS 302-2-35(Endurance)	-	0	-
Cl. 17 IS 302-2-35(Overload Protection of Transformers and Associated Circuit)	-	4000	-
Cl. 16 IS 302-2-35(Leakage Current & Electric Strength at Operating Temperature (After Humidity Treatment))	-	3000	-
Cl. 15 IS 302-2-35(Moisture Resistance Test )	-	4000	-
Cl. 14 IS 302-2-35(Radio and television interference suppression / Transient over voltages)	-	0	-
Cl. 13 IS 302-2-35(Leakage Current & Electric Strength at Operating Temperature)	-	3000	-
Cl. 11 IS 302-2-35(Heating)	-	4000	-
Cl. 10 IS 302-2-35(Power Input and Current )	-	2000	-
Cl. 9 IS 302-2-35(Starting of motor operated appliances)	-	0	-
Cl. 8 IS 302-2-35(Protection against access to live parts)	-	2000	-
Cl. 7 IS 302-2-35(Marking and Instruction)	-	2000	-
Cl. 6 IS 302-2-35(Classification)	-	0	-
5(GENERAL CONDITIONS FOR THE TESTS)	-	0	-
4(GENERAL REQUIREMENT)	-	0	-

31 Dec, 2026

-
Included w.e.f.20.06.2025 Exclusion (EMI/EMC)Cl 19.11.4.1 TO Cl 19.11.4.7

IS 302 : Part 2 : Sec 32 (1994)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 32 massage appliances

57000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 32 302-2-32 : 1994(Radiation Hazards)	-	0	-
Cl. 31 302-2-32 : 1994(Resistance to Rusting)	-	0	-
Cl. 30 302-2-32 : 1994(Resistance to Heat Fire & Tracking )	-	3000	-
Cl. 29 302-2-32 : 1994(Clearances, Creepage Distances & Solid insulation )	-	2000	-
Cl. 28 302-2-32 : 1994(Screws & Connections)	-	1000	-
Cl. 27 302-2-32 : 1994(Provision for Earthing )	-	2000	-
Cl. 26 302-2-32 : 1994(Terminals for External conductors )	-	1000	-
Cl. 25 302-2-32 : 1994(Supply Connection & External Flexible Cords)	-	2000	-
Cl. 24 302-2-32 : 1994(Components)	-	3000	-
Cl. 23 302-2-32 : 1994(Internal Wiring)	-	2000	-
Cl. 22 302-2-32 : 1994(Construction )	-	5000	-
Cl. 21 302-2-32 : 1994(Mechanical strength)	-	2000	-
Cl. 20 302-2-32 : 1994(Stability & Mechanical Hazards)	-	2000	-
Cl. 19 302-2-32 : 1994(Abnormal Operation )	-	5000	-
Cl. 18 302-2-32 : 1994(Endurance)	-	0	-
Cl. 17 302-2-32 : 1994(Overload Protection of Transformers and Associated Circuit)	-	4000	-
Cl. 16 302-2-32 : 1994(Leakage Current & Electric Strength at Operating Temperature (After Humidity Treatment))	-	3000	-
Cl. 15 302-2-32: 1994(Moisture Resistance Test )	-	4000	-
Cl. 14 302-2-32 : 1994(Radio and television interference suppression / Transient over voltages)	-	2000	-
Cl. 13 302-2-32 : 1994(Leakage Current & Electric Strength at Operating Temperature)	-	3000	-
Cl. 11 302-2-32 : 1994(Temperature Rise)	-	4000	-
Cl. 10 302-2-32 : 1994(Power Input and Current )	-	2000	-
Cl. 9 302-2-32 : 1994(Protection Against Electric Shock)	-	0	-
Cl. 8 302-2-32 : 1994(Starting of motor operated appliances)	-	2000	-
Cl. 7 302-2-32 : 1994(Marking)	-	2000	-
(CI. 6 IS 302-2-32 : 1994(Classification )	-	0	-
Cl. 32 302-2-32 : 1994(Radiation Hazards)	-	-	-
Cl. 31 302-2-32 : 1994(Resistance to Rusting)	-	-	-
Cl. 30 302-2-32 : 1994(Resistance to Heat Fire & Tracking )	-	-	-
Cl. 29 302-2-32 : 1994(Clearances, Creepage Distances & Solid insulation )	-	-	-
Cl. 28 302-2-32 : 1994(Screws & Connections)	-	-	-
Cl. 27 302-2-32 : 1994(Provision for Earthing )	-	-	-
Cl. 26 302-2-32 : 1994(Terminals for External conductors )	-	-	-
Cl. 25 302-2-32 : 1994(Supply Connection & External Flexible Cords)	-	-	-
Cl. 24 302-2-32 : 1994(Components)	-	-	-
Cl. 23 302-2-32 : 1994(Internal Wiring)	-	-	-
Cl. 22 302-2-32 : 1994(Construction )	-	-	-
Cl. 21 302-2-32 : 1994(Mechanical strength)	-	-	-
Cl. 20 302-2-32 : 1994(Stability & Mechanical Hazards)	-	-	-
Cl. 19 302-2-32 : 1994(Abnormal Operation )	-	-	-
Cl. 18 302-2-32 : 1994(Endurance)	-	-	-
Cl. 17 302-2-32 : 1994(Overload Protection of Transformers and Associated Circuit)	-	-	-
Cl. 16 302-2-32 : 1994(Leakage Current & Electric Strength at Operating Temperature (After Humidity Treatment))	-	-	-
Cl. 15 302-2-32: 1994(Moisture Resistance Test )	-	-	-
Cl. 14 302-2-32 : 1994(Radio and television interference suppression / Transient over voltages)	-	-	-
Cl. 13 302-2-32 : 1994(Leakage Current & Electric Strength at Operating Temperature)	-	-	-
Cl. 11 302-2-32 : 1994(Temperature Rise)	-	-	-
Cl. 10 302-2-32 : 1994(Power Input and Current )	-	-	-
Cl. 9 302-2-32 : 1994(Protection Against Electric Shock)	-	-	-
Cl. 8 302-2-32 : 1994(Starting of motor operated appliances)	-	-	-
Cl. 7 302-2-32 : 1994(Marking)	-	-	-
(CI. 6 IS 302-2-32 : 1994(Classification )	-	-	-

31 Dec, 2026

-
Included w.e.f.20.06.2025 Exclusion (EMI/EMC)Cl 19.11.4.1 TO Cl 19.11.4.7

IS 302 : Part 2 : Sec 24 (1994)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 24 refrigerators, food - Freezers and ice - Makers

66000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
32(Radiation, toxicity and similar hazards)	-	0	-
31(Resistance to rusting)	-	0	-
30.3(Resistance to heat and fire)	-	0	Test charges included in Cl 30.1
30.2(Resistance to heat and fire)	-	0	Test charges included in Cl 30.1
30.1(Resistance to heat and fire)	-	0	Test charges included in Cl 30.1
30.1(Resistance to heat and fire)	-	3000	-
29.2 & 29.3(Clearances, creepage distances )	-	0	Test charges included in Cl 29.1
29.1 and table 2(creepage and Clearances distances )	-	2000	-
28.2 to 28.4(Screws and connections)	-	0	Test charges included in Cl 28.1
28.1, Table No.-14(Screws and connections)	-	1000	-
27.5(Provision for earthing)	-	0	Test charges included in Cl 27.1
27.1 to 27.4(Provision for earthing)	-	2000	-
26.10 & 26.13(Terminals for external conductors)	-	0	Test charges included in Cl 26.1
26.9(Terminals for external conductors)	-	0	Test charges included in Cl 26.1
26.1 to 26.8(Terminals for external conductors)	-	1000	-
25.7 to 25.13(Supply connection and external flexible cords)	-	0	Test charges included in Cl 25.1
25.6(Supply connection and external flexible cords)	-	0	Test charges included in Cl 25.1
25.4(Supply connection and external flexible cords)	-	0	Test charges included in Cl 25.1
25.4(Supply connection and external flexible cords)	-	0	Test charges included in Cl 25.1
25.3(Supply connection and external flexible cords)	-	0	Test charges included in Cl 25.1
25.2(Supply connection and external flexible cords)	-	0	Test charges included in Cl 25.1
25.1(Supply connection and external flexible cords)	-	2000	-
24.2 ,24.3,24.5 & 24.6(Components)	-	0	Test charges included in Cl 24.1
24.1(Components)	-	3000	-
23.5 to 23.8(Internal wiring)	-	0	Test charges included in Cl 23.1
23.4(Internal wiring)	-	0	Test charges included in Cl 23.1
23.3(Internal wiring)	-	0	Test charges included in Cl 23.1
23.1 & 23.2(Internal wiring)	-	2000	-
22.101 to 22.103(Constructions)	-	0	Test charges included in Cl 22.1
22.13 to 22.33(Constructions)	-	0	Test charges included in Cl 22.1
22.12(Constructions)	-	0	Test charges included in Cl 22.1
22.11(Constructions)	-	0	Test charges included in Cl 22.1
22.7 to 22.10(Constructions)	-	0	Test charges included in Cl 22.1
22.6(Constructions)	-	0	Test charges included in Cl 22.1
22.5(Constructions)	-	0	Test charges included in Cl 22.1
22.4(Constructions)	-	0	Test charges included in Cl 22.1
22.3(Constructions)	-	0	Test charges included in Cl 22.1
22.2(Constructions)	-	0	Test charges included in Cl 22.1
22.1(Constructions)	-	5000	-
21.2(MECHANICAL STRENGTH)	-	0	Test charges included in Cl 21.1
21.1(MECHANICAL STRENGTH)	-	2500	-
20.2(Stability and mechanical hazards)	-	1000	-
20.1(Stability and mechanical hazards)	-	1000	-
19.103(ABNORMAL OPERATION)	-	0	Test charges included in Cl 19
19.102(ABNORMAL OPERATION)	-	0	Test charges included in Cl 19
19.101(ABNORMAL OPERATION)	-	0	Test charges included in Cl 19
19.11(ABNORMAL OPERATION)	-	0	Test charges included in Cl 19
19.9(ABNORMAL OPERATION)	-	0	Test charges included in Cl 19
19.7(ABNORMAL OPERATION)	-	0	Test charges included in Cl 19
19(ABNORMAL OPERATION)	-	6000	-
17(Over load Protection )	-	4000	-
16.4(INSULATION RESISTANCE AND ELECTRIC STRENGTH ( After the Humidity Treatment ))	-	0	Test charges included in Cl 16.1
16.3 & table(INSULATION RESISTANCE AND ELECTRIC STRENGTH ( After the Humidity Treatment ))	-	0	Test charges included in Cl 16.1
16.2(INSULATION RESISTANCE AND ELECTRIC STRENGTH ( After the Humidity Treatment ))	-	0	Test charges included in Cl 16.1
16 & 16.1(INSULATION RESISTANCE AND ELECTRIC STRENGTH ( After the Humidity Treatment ))	-	3000	-
15.103(Moisture resistance)	-	0	Test charges included in Cl 15
15.102(Moisture resistance)	-	0	Test charges included in Cl 15
15.101(Moisture resistance)	-	0	Test charges included in Cl 15
15.4(Moisture resistance)	-	0	Test charges included in Cl 15
15.3(Moisture resistance)	-	0	Test charges included in Cl 15
15.2(Moisture resistance)	-	0	Test charges included in Cl 15
15(Moisture resistance)	-	4000	-
14( RADIO AND TELEVISION INTERFERENCE SUPPRESSION )	-	0	-
13(ELECTRICAL INSULATION AND LEAKAGE CURRENT AT OPERATING TEMPERATURE)	-	3000	-
12,12.1,12.2 & 12.3(Heating)	-	4000	-
11.103(TEMPERATURE RISE)	-	0	Test charges included in Cl 11
11.102(TEMPERATURE RISE)	-	0	Test charges included in Cl 11
11.101(TEMPERATURE RISE)	-	0	Test charges included in Cl 11
11.1(TEMPERATURE RISE)	-	0	Test charges included in Cl 11
11.8(TEMPERATURE RISE)	-	0	Test charges included in Cl 11
11.7(TEMPERATURE RISE)	-	0	Test charges included in Cl 11
11.6(TEMPERATURE RISE)	-	0	Test charges included in Cl 11
11.5(TEMPERATURE RISE)	-	0	Test charges included in Cl 11
11.4(TEMPERATURE RISE)	-	0	Test charges included in Cl 11
11.2(TEMPERATURE RISE)	-	0	Test charges included in Cl 11
11(TEMPERATURE RISE)	-	5000	-
10.1,10.2 10.101,10.102( Input and Current)	-	2000	-
9.2(Startability Test)	-	0	Test charges included in Cl 9
9.1(Startability Test)	-	0	Test charges included in Cl 9
9(Starting of motor operated Appliances)	-	3000	-
8.1.5(Protection against access to live parts)	-	0	Test charges included in Cl 8.1.1
8.1.4(Protection against access to live parts)	-	0	Test charges included in Cl 8.1.1
8.1.3(Protection against access to live parts)	-	0	Test charges included in Cl 8.1.1
8.1.2(Protection against access to live parts)	-	0	Test charges included in Cl 8.1.1
8.1, 8.1.1 & 8.2(Protection against access to live parts)	-	2000	-
7.1 , 7.12, 7.14,7.15(Marking)	-	2000	-
32(Radiation, toxicity and similar hazards)	-	0	-
31(Resistance to rusting)	-	0	-
30.3(Resistance to heat and fire)	-	0	Test charges included in Cl 30.1
30.2(Resistance to heat and fire)	-	0	Test charges included in Cl 30.1
30.1(Resistance to heat and fire)	-	0	Test charges included in Cl 30.1
30.1(Resistance to heat and fire)	-	0	Test charges included in Cl 30.1
29.2 & 29.3(Clearances, creepage distances )	-	0	Test charges included in Cl 29.1
29.1 and table 2(creepage and Clearances distances )	-	0	Test charges included in Cl 29.1
28.2 to 28.4(Screws and connections)	-	0	Test charges included in Cl 28.1
28.1, Table No.-14(Screws and connections)	-	0	Test charges included in Cl 28.1
27.5(Provision for earthing)	-	0	Test charges included in Cl 27.1
27.1 to 27.4(Provision for earthing)	-	0	Test charges included in Cl 27.1
26.10 & 26.13(Terminals for external conductors)	-	0	Test charges included in Cl 26.1
26.9(Terminals for external conductors)	-	0	Test charges included in Cl 26.1
26.1 to 26.8(Terminals for external conductors)	-	0	Test charges included in Cl 26.1
25.7 to 25.13(Supply connection and external flexible cords)	-	0	Test charges included in Cl 25.1
25.6(Supply connection and external flexible cords)	-	0	Test charges included in Cl 25.1
25.4(Supply connection and external flexible cords)	-	0	Test charges included in Cl 25.1
25.4(Supply connection and external flexible cords)	-	0	Test charges included in Cl 25.1
25.3(Supply connection and external flexible cords)	-	0	Test charges included in Cl 25.1
25.2(Supply connection and external flexible cords)	-	0	Test charges included in Cl 25.1
25.1(Supply connection and external flexible cords)	-	0	Test charges included in Cl 25.1
24.2 ,24.3,24.5 & 24.6(Components)	-	0	Test charges included in Cl 24.1
24.1(Components)	-	0	Test charges included in Cl 24.1
23.5 to 23.8(Internal wiring)	-	0	Test charges included in Cl 23.1
23.4(Internal wiring)	-	0	Test charges included in Cl 23.1
23.3(Internal wiring)	-	0	Test charges included in Cl 23.1
23.1 & 23.2(Internal wiring)	-	0	Test charges included in Cl 23.1
22.101 to 22.103(Constructions)	-	0	Test charges included in Cl 22.1
22.13 to 22.33(Constructions)	-	0	Test charges included in Cl 22.1
22.12(Constructions)	-	0	Test charges included in Cl 22.1
22.11(Constructions)	-	0	Test charges included in Cl 22.1
22.7 to 22.10(Constructions)	-	0	Test charges included in Cl 22.1
22.6(Constructions)	-	0	Test charges included in Cl 22.1
22.5(Constructions)	-	0	Test charges included in Cl 22.1
22.4(Constructions)	-	0	Test charges included in Cl 22.1
22.3(Constructions)	-	0	Test charges included in Cl 22.1
22.2(Constructions)	-	0	Test charges included in Cl 22.1
22.1(Constructions)	-	0	Test charges included in Cl 22.1
21.2(MECHANICAL STRENGTH)	-	0	Test charges included in Cl 21.1
21.1(MECHANICAL STRENGTH)	-	0	Test charges included in Cl 21.1
20.2(Stability and mechanical hazards)	-	0	Test charges included in Cl 20.1
20.1(Stability and mechanical hazards)	-	0	Test charges included in Cl 20.1
19.103(ABNORMAL OPERATION)	-	0	Test charges included in Cl 19
19.102(ABNORMAL OPERATION)	-	0	Test charges included in Cl 19
19.101(ABNORMAL OPERATION)	-	0	Test charges included in Cl 19
19.11(ABNORMAL OPERATION)	-	0	Test charges included in Cl 19
19.9(ABNORMAL OPERATION)	-	0	Test charges included in Cl 19
19.7(ABNORMAL OPERATION)	-	0	Test charges included in Cl 19
19(ABNORMAL OPERATION)	-	0	Test charges included in Cl 19
17(Over load Protection )	-	0	Test charges included in Cl 17
16.4(INSULATION RESISTANCE AND ELECTRIC STRENGTH ( After the Humidity Treatment ))	-	0	Test charges included in Cl 16.1
16.3 & table(INSULATION RESISTANCE AND ELECTRIC STRENGTH ( After the Humidity Treatment ))	-	0	Test charges included in Cl 16.1
16.2(INSULATION RESISTANCE AND ELECTRIC STRENGTH ( After the Humidity Treatment ))	-	0	Test charges included in Cl 16.1
16 & 16.1(INSULATION RESISTANCE AND ELECTRIC STRENGTH ( After the Humidity Treatment ))	-	0	Test charges included in Cl 16.1
15.103(Moisture resistance)	-	0	Test charges included in Cl 15
15.102(Moisture resistance)	-	0	Test charges included in Cl 15
15.101(Moisture resistance)	-	0	Test charges included in Cl 15
15.4(Moisture resistance)	-	0	Test charges included in Cl 15
15.3(Moisture resistance)	-	0	Test charges included in Cl 15
15.2(Moisture resistance)	-	0	Test charges included in Cl 15
15(Moisture resistance)	-	0	Test charges included in Cl 15
14( RADIO AND TELEVISION INTERFERENCE SUPPRESSION )	-	0	-
13(ELECTRICAL INSULATION AND LEAKAGE CURRENT AT OPERATING TEMPERATURE)	-	0	Test charges included in Cl 13
12,12.1,12.2 & 12.3(Heating)	-	0	-
11.103(TEMPERATURE RISE)	-	0	Test charges included in Cl 11
11.102(TEMPERATURE RISE)	-	0	Test charges included in Cl 11
11.101(TEMPERATURE RISE)	-	0	Test charges included in Cl 11
11.1(TEMPERATURE RISE)	-	0	Test charges included in Cl 11
11.8(TEMPERATURE RISE)	-	0	Test charges included in Cl 11
11.7(TEMPERATURE RISE)	-	0	Test charges included in Cl 11
11.6(TEMPERATURE RISE)	-	0	Test charges included in Cl 11
11.5(TEMPERATURE RISE)	-	0	Test charges included in Cl 11
11.4(TEMPERATURE RISE)	-	0	Test charges included in Cl 11
11.2(TEMPERATURE RISE)	-	0	Test charges included in Cl 11
11(TEMPERATURE RISE)	-	0	Test charges included in Cl 11
10.1,10.2 10.101,10.102( Input and Current)	-	0	-
9.2(Startability Test)	-	0	-
9.1(Startability Test)	-	0	-
9(Starting of motor operated Appliances)	-	0	-
8.1.5(Protection against access to live parts)	-	0	Test charges included in Cl 8.1.1
8.1.4(Protection against access to live parts)	-	0	Test charges included in Cl 8.1.1
8.1.3(Protection against access to live parts)	-	0	Test charges included in Cl 8.1.1
8.1.2(Protection against access to live parts)	-	0	Test charges included in Cl 8.1.1
8.1, 8.1.1 & 8.2(Protection against access to live parts)	-	0	Test charges included in Cl 8.1.1
7.1 , 7.12, 7.14,7.15(Marking)	-	0	-
6(Classifications)	-	0	-
6(Classifications)	-	0	-

31 Dec, 2026

-
Included w.e.f.20.06.2025 Exclusion (EMI/EMC)Cl 19.11.4.1 TO Cl 19.11.4.7

IS 302 : Part 2 : Sec 23 (2009)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 23 appliances for skin or hair care (First Revision)

58000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
32(Radiation ,Toxicity and similar hazards)	-	0	-
31(Resistance to Rusting)	-	0	-
30(Resistance to Heat & Fire)	-	3000	-
29(Clearances, Creepage Distances & Solid Insulation)	-	2000	-
28(Screws & Connection)	-	1000	-
27(Provision For Earthing)	-	2000	-
26(Terminals For External Conductors)	-	1000	-
25(Supply Connection & External Flexible Cables and Cords)	-	2000	-
24(Component)	-	3000	-
23(Internal wiring)	-	2000	-
22(Construction)	-	5000	-
21(Mechanical strength)	-	2000	-
20(Stability & Mechanical Hazards)	-	2000	-
19(Abnormal Operation)	-	6000	-
18(Endurance)	-	0	-
17(Overload Protection/ Overload Protection of Transformers & Associated Circuits)	-	4000	-
16(Leakage Current and Electric Strength)	-	3000	-
15(Moisture Resistance)	-	4000	-
14(Transient Over Voltage)	-	2000	-
13(Leakage Current and Electric Strength at Operating Temperature)	-	3000	-
11(Temperature Rise/Heating)	-	4500	-
10(Power Input & Current)	-	2000	-
9(Starting Of Motor Operated Appliances)	-	0	-
8(Protection against Electric Shock/ Protection against Access to Live Parts)	-	2000	-
7(Marking/ Marking & Instructions)	-	2000	-
6(Classification)	-	0	-
22.32(CONSTRUCTION)	-	0	Testing charges included in Cl 22

31 Dec, 2026

-
Included w.e.f.20.06.2025 Exclusion (EMI/EMC)Cl 19.11.4.1 TO Cl 19.11.4.7

IS 302 : Part 2 : Sec 21 (2024)

Household and Similar Electrical Appliancesï¿½Safety Part 2 Particular Requirements Section 21 Storage Water Heaters

78000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(General requirement)	-	0	-
5(General conditions for the tests)	-	0	-
6(Classification)	-	0	-
7(Marking and instructions)	-	2000	-
8(Protection against access to live parts)	-	2000	-
9(Starting of motor-operated appliances)	-	0	-
10(Power input and current)	-	2000	-
11(Heating)	-	4000	-
13(Leakage current and electric strength at operating temperature)	-	3000	-
14(Transient overvoltages)	-	2000	-
15(Moisture resistance)	-	4000	-
16(Leakage current and electric strength)	-	3000	-
17(Overload protection of transformers and associated circuits)	-	4000	-
18(Endurance)	-	0	-
19(Abnormal operation)	-	7000	-
20(Stability and mechanical hazards)	-	2000	-
21(Mechanical strength)	-	3000	-
22(Construction)	-	6000	-
23(Internal wiring)	-	2000	-
24(Components)	-	6000	-
25(Supply connection and external flexible cords)	-	2000	-
26(Terminals for external conductors)	-	1000	-
27(Provision for earthing)	-	2000	-
28(Screws and connections)	-	1000	-
29(Clearances, creepage distances and solid insulation)	-	2000	-
30(Resistance to heat and fire)	-	3000	-
31(Resistance to rusting)	-	0	-
32(Radiation, toxicity and similar hazards)	-	0	-
A.101(Pressure test)	-	0	-
12(Charging of metal-ion batteries)	-	15000	-
22.101(rated pressure)	-	0	Testing charges included in Cl 22
22.102(Closed water heaters)	-	0	Testing charges included in Cl 22
22.103(Addition)	-	0	Testing charges included in Cl 22
22.104(Addition)	-	0	Testing charges included in Cl 22
22.105(Cistern-type water heaters)	-	0	Testing charges included in Cl 22
22.109(Addition)	-	0	Testing charges included in Cl 22

31 Dec, 2026

-
Included w.e.f.16.07.2025 Exclusion Cl 19.11.4.1 to Cl 19.11.4.7 EMI/EMC Only Cl 32

IS 302 : Part 2 : Sec 21 (2018)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 21 stationary storage type electric water heaters (Second Revision)

59000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
31.0(Resistance To Rusting)	-	0	-
30.0(Resistance To Heat and Fire)	-	3000	-
29.0(Creepage Distances and Clearances)	-	2000	-
28.0(Screws and Connections)	-	1000	-
27.0(Provision For Earthing)	-	2000	-
26.0(Terminals for external conductors)	-	1000	-
25.0(Supply Connection and External Flexible Cords)	-	2000	-
23.0(Internal Wiring)	-	2000	-
22.0(Construction)	-	7000	-
21.0(Mechanical Strength)	-	1500	-
20.0(Stability and mechanical hazards)	-	2000	-
19.0(Abnormal Operation)	-	5000	-
17.0(Overload Protection of transformer and associated circuit)	-	4000	-
16.0(Leakage current and Electric strength (After Humidity (Environmental) Treatment))	-	3000	-
15.0(Moisture resistance)	-	4000	-
14.0(Transient Overvoltage)	-	2000	-
13.0(Leakage Current and electric strength at operating temperature)	-	3000	-
11.0(Heating)	-	4000	-
10.0(Input and Current)	-	2000	-
8.0(Protection against access to live parts)	-	2000	-
6.0(Classification)	-	0	-
7.0(Marking and Instructions)	-	2000	-
24(Components)	-	4000	-
4(GENERAL REQUIREMENTS)	-	0	-
5(GENERAL CONDITIONS FOR THE TESTS)	-	0	-
32(RADIATION TOXICITY AND SIMILAR HAZARDS)	-	0	-

31 Dec, 2026

-
Included w.e.f.20.06.2025 Exclusion (EMI/EMC)Cl 19.11.4.1 TO Cl 19.11.4.7

IS 302 : Part 2 : Sec 15 (2009)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 15 appliances for heating liquids (First Revision)

62500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.0(Classification)	-	0	-
7(Marking and instructions)	-	2000	-
8(Protection against live parts)	-	2000	-
9(STARTING OF MOTOR-OPERATED APPLIANCES)	-	0	-
10(POWER INPUT AND CURRENT)	-	2000	-
11(HEATING)	-	4000	-
13(LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE)	-	3000	-
14(TRANSIENT OVERVOLTAGES)	-	2000	-
15(MOISTURE RESISTANCE)	-	5500	-
16(LEAKAGE CURRENT AND ELECTRIC STRENGTH)	-	3000	-
17(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	4000	-
18(ENDURANCE)	-	0	-
19(ABNORMAL OPERATION)	-	7000	-
20(STABILITY AND MECHANICAL HAZARDS)	-	2000	-
21(MECHANICAL STRENGTH)	-	1500	-
22(CONSTRUCTION)	-	7000	-
23(INTERNAL WIRING)	-	2000	-
24(COMPONENTS)	-	4500	-
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CORDS)	-	2000	-
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	1000	-
27(PROVISION FOR EARTHING)	-	2000	-
28(SCREWS AND CONNECTIONS)	-	1000	-
29(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION)	-	2000	-
30(RESISTANCE TO HEAT AND FIRE)	-	3000	-
31(RESISTANCE TO RUSTING)	-	1000	-
32(RADIATION, TOXICITY AND SIMILAR HAZARDS)	-	0	-
22.16(Automatic cord reel)	-	0	Testing charges included in Cl 22
22.32(Oxygen bomb for rubber material)	-	0	Testing charges included in Cl 22
22.47(Water pressure inlet)	-	0	Testing charges included in Cl 22
22.106(Interlocks)	-	0	Testing charges included in Cl 22
22.3(Flexing test)	-	0	Testing charges included in Cl 22
24(Components)	-	0	Testing charges included in Cl 24
4(General requirements)	-	0	-
5(General Conditions of tests)	-	0	-
6(Classification- IS 302-1)	-	0	-
6(Classification- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	Testing charges included in Cl 7
7.1(Marking- IS 302-1)	-	0	Testing charges included in Cl 7
7.1(Marking- IS 302-1)	-	0	Testing charges included in Cl 7
7.1(Marking- IS 302-1)	-	0	Testing charges included in Cl 7
7.1(Marking- IS 302-1)	-	0	Testing charges included in Cl 7
7.1(Marking- IS 302-1)	-	0	Testing charges included in Cl 7
7.1(Marking- IS 302-1)	-	0	Testing charges included in Cl 7
7.1(Marking- IS 302-1)	-	0	Testing charges included in Cl 7
7.1(Marking- IS 302-2-15)	-	0	Testing charges included in Cl 7
7.3(Marking- IS 302-1)	-	0	Testing charges included in Cl 7
7.4(Marking- IS 302-1)	-	0	Testing charges included in Cl 7
7.5(Marking- IS 302-1)	-	0	Testing charges included in Cl 7
7.6(Marking- IS 302-1)	-	0	Testing charges included in Cl 7
7.7(Marking- IS 302-1)	-	0	Testing charges included in Cl 7
7.8(Marking- IS 302-1)	-	0	Testing charges included in Cl 7
6(Classification- IS 302-1)	-	0	-
6(Classification- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	Testing charges included in Cl 7
7.1(Marking- IS 302-1)	-	0	Testing charges included in Cl 7
7.1(Marking- IS 302-1)	-	0	Testing charges included in Cl 7
7.1(Marking- IS 302-1)	-	0	Testing charges included in Cl 7
7.1(Marking- IS 302-1)	-	0	Testing charges included in Cl 7
7.1(Marking- IS 302-1)	-	0	Testing charges included in Cl 7
7.1(Marking- IS 302-1)	-	0	Testing charges included in Cl 7
Marking- IS 302-1(Marking- IS 302-1)	-	0	Testing charges included in Cl 7
7.1(Marking- IS 302-2-15)	-	0	Testing charges included in Cl 7
7.3(Marking- IS 302-1)	-	0	Testing charges included in Cl 7
7.4(Marking- IS 302-1)	-	0	Testing charges included in Cl 7
7.5(Marking- IS 302-1)	-	0	Testing charges included in Cl 7
7.6(Marking- IS 302-1)	-	0	Testing charges included in Cl 7
7.7(Marking- IS 302-1)	-	0	Testing charges included in Cl 7
7.8(Marking- IS 302-1)	-	0	Testing charges included in Cl 7
7.9(Marking- IS 302-1)	-	0	Testing charges included in Cl 7
7.1O(Marking- IS 302-1)	-	0	Testing charges included in Cl 7
7.11(Marking- IS 302-1)	-	0	Testing charges included in Cl 7
7.12(Marking- IS 302-2-15)	-	0	Testing charges included in Cl 7
7.12(Marking- IS 302-1)	-	0	Testing charges included in Cl 7
7.12.1(Marking- IS 302-1)	-	0	Testing charges included in Cl 7
7.12.3(Marking- IS 302-1)	-	0	Testing charges included in Cl 7
7.12.5(Marking- IS 302-1)	-	0	Testing charges included in Cl 7
7.12.6(Marking- IS 302-1)	-	0	Testing charges included in Cl 7
7.13(Marking- IS 302-1)	-	0	Testing charges included in Cl 7
7.14(Marking- IS 302-1)	-	0	Testing charges included in Cl 7
7.15(Marking- IS 302-1)	-	0	Testing charges included in Cl 7
7.101(Marking- IS 302-2-15)	-	0	Testing charges included in Cl 7
8(Protection Against Electric Shock, IS 302-1)	-	0	Testing charges included in Cl 8
10(Power Input and Current, IS 302-1)	-	0	Testing charges included in Cl 10
11(Heating, IS 302-1)	-	0	Testing charges included in Cl 11
11(Heating, IS 302-1)	-	0	Testing charges included in Cl 11
11(Heating, IS 302-1)	-	0	Testing charges included in Cl 11
11(Heating, IS 302-1)	-	0	Testing charges included in Cl 11
13(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	0	Testing charges included in Cl 13
13(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	0	Testing charges included in Cl 13
15.1(Moisture Resistance, IS 302-1)	-	0	Testing charges included in Cl 15
15.2(Spillage test as 15.2, IS 3.02-1 & 302-2-15)	-	0	Testing charges included in Cl 15
16(Leakage current as per Cl 16, IS 302-1)	-	0	Testing charges included in Cl 16
16(electric strength as per Cl 16, IS 302-1)	-	0	Testing charges included in Cl 16
17(Overload protection of Transformers and Associated Circuits, IS 302-1)	-	0	Testing charges included in Cl 17
19.13(Abnormal Operation as per Cl 19, IS 302-2-15)	-	0	Testing charges included in Cl 19
19.13(Abnormal Operation as per Cl 19, IS 302-1)	-	0	Testing charges included in Cl 19
19.13(Abnormal Operation as per Cl 19, IS 302-1)	-	0	Testing charges included in Cl 19
19.13(Abnormal Operation as per Cl 19, IS 302-1)	-	0	Testing charges included in Cl 19
20.1(Stability & Mechanical Hazards, IS 302-1)	-	0	Testing charges included in Cl 20
21.1(Mechanical Strength, IS 302-1)	-	0	Testing charges included in Cl 21
21.2(Mechanical Strength, IS 302-1)	-	0	Testing charges included in Cl 21
22.1(Construction, IS 302-1)	-	0	Testing charges included in Cl 21
22.7(Construction as per Cl 22.7, IS 3.02-2-15)	-	0	Testing charges included in Cl 22
22.107(Construction as per Cl 22.7, IS 3.02-2-15)	-	0	Testing charges included in Cl 22
22.108(Construction as per Cl 22.8, IS 3.02-2-15)	-	0	Testing charges included in Cl 22
23.1(Internal Wiring, IS 302-1)	-	0	Testing charges included in Cl 23
23.2(Internal Wiring, IS 302-1)	-	0	Testing charges included in Cl 23
23.4(Internal Wiring, IS 302-1)	-	0	Testing charges included in Cl 23
23.5(Internal Wiring, IS 302-1)	-	0	Testing charges included in Cl 23
23.6(Internal Wiring, IS 302-1)	-	0	Testing charges included in Cl 23
23.7(Internal Wiring, IS 302-1)	-	0	Testing charges included in Cl 23
23.8(Internal Wiring, IS 302-1)	-	0	Testing charges included in Cl 23
23.9(Internal Wiring, IS 302-1)	-	0	Testing charges included in Cl 23
23.1O(Internal Wiring, IS 302-1)	-	0	Testing charges included in Cl 23
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	0	Testing charges included in Cl 25
25.2(Supply Connection and External Flexible Cords, IS 302-1)	-	0	Testing charges included in Cl 25
25.5(Supply Connection and External Flexible Cords, IS 302-1)	-	0	Testing charges included in Cl 25
25.6(Supply Connection and External Flexible Cords, IS 302-1)	-	0	Testing charges included in Cl 25
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	0	Testing charges included in Cl 25
25.9(Supply Connection and External Flexible Cords, IS 302-1)	-	0	Testing charges included in Cl 25
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	0	Testing charges included in Cl 25
25.11(Supply Connection and External Flexible Cords, IS 302-1)	-	0	Testing charges included in Cl 25
25.12(Supply Connection and External Flexible Cords, IS 302-1)	-	0	Testing charges included in Cl 25
25.13(Supply Connection and External Flexible Cords, IS 302-1)	-	0	Testing charges included in Cl 25
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	0	Testing charges included in Cl 25
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	0	Testing charges included in Cl 25
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	0	Testing charges included in Cl 25
25.16(Supply Connection and External Flexible Cords, IS 302-1)	-	0	Testing charges included in Cl 25
25.17(Supply Connection and External Flexible Cords, IS 302-1)	-	0	Testing charges included in Cl 25
25.18(Supply Connection and External Flexible Cords, IS 302-1)	-	0	Testing charges included in Cl 25
25.19(Supply Connection and External Flexible Cords, IS 302-1)	-	0	Testing charges included in Cl 25
25.2(Supply Connection and External Flexible Cords, IS 302-1)	-	0	Testing charges included in Cl 25
25.21(Supply Connection and External Flexible Cords, IS 302-1)	-	0	Testing charges included in Cl 25
25.22(Supply Connection and External Flexible Cords, IS 302-1)	-	0	Testing charges included in Cl 25
26(Terminals for External Conductors, IS 302-1)	-	0	Testing charges included in Cl 26
27.1(Provision for Earthing, IS 302-1)	-	0	Testing charges included in Cl 27
27.2(Provision for Earthing, IS 302-1)	-	0	Testing charges included in Cl 27
27.3(Provision for Earthing, IS 302-1)	-	0	Testing charges included in Cl 27
27.4(Provision for Earthing, IS 302-1)	-	0	Testing charges included in Cl 27
27.5(Provision for Earthing, IS 302-1)	-	0	Testing charges included in Cl 27
28(Screws & Connections, IS 302-1)	-	0	Testing charges included in Cl 28
29.1(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	0	Testing charges included in Cl 29
29.2(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	0	Testing charges included in Cl 29
30.1(Resistance to Heat and Fire, IS 302-1)	-	0	Testing charges included in Cl 30
30.2(Resistance to Heat and Fire, IS 302-1)	-	0	Testing charges included in Cl 30
31(Resistance of Rusting, IS 302-1)	-	0	-

31 Dec, 2026

-
Included w.e.f.20.06.2025 Exclusion (EMI/EMC)Cl 19.11.4.1 TO Cl 19.11.4.7

IS 302 : Part 2 : Sec 14 (2009)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 14 electric kitchen machines (First Revision)

62500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Classification- IS 302-1 )	-	0	-
6(Classification- IS 302-1)	-	0	Testing charges included in Cl .6
7.1(Marking- IS 302-1)	-	2000	-
7.1(Marking- IS 302-1)	-	0	Testing charges included in Cl .7.1
7.1(Marking- IS 302-1)	-	0	Testing charges included in Cl .7.1
7.1(Marking- IS 302-1)	-	0	Testing charges included in Cl .7.1
7.1(Marking- IS 302-1)	-	0	Testing charges included in Cl .7.1
7.1(Marking- IS 302-1)	-	0	Testing charges included in Cl .7.1
7.1(Marking- IS 302-1)	-	0	Testing charges included in Cl .7.1
7.1(Marking- IS 302-1)	-	0	Testing charges included in Cl .7.1
7.3(Marking- IS 302-1)	-	0	Testing charges included in Cl .7.1
7.4(Marking- IS 302-1)	-	0	Testing charges included in Cl .7.1
7.6(Marking- IS 302-1)	-	0	Testing charges included in Cl .7.1
7.7(Marking- IS 302-1)	-	0	Testing charges included in Cl .7.1
7.8(Marking- IS 302-1)	-	0	Testing charges included in Cl .7.1
7.11(Marking- IS 302-1)	-	0	Testing charges included in Cl .7.1
7.12(Marking- IS 302-1)	-	0	Testing charges included in Cl .7.1
7.13(Marking- IS 302-1)	-	0	Testing charges included in Cl .7.1
7.14(Marking- IS 302-1)	-	0	Testing charges included in Cl .7.1
7.15(Marking- IS 302-1)	-	0	Testing charges included in Cl .7.1
7.101(Marking)	-	0	Testing charges included in Cl .7.1
8( Protection Against Electric Shock, IS 302-1)	-	2000	-
10(Power Input and Current, IS 302-1)	-	2000	-
11(Heating, IS 302-1)	-	4000	-
11(Heating, IS 302-1)	-	0	Testing charges included in Cl .11
11(Heating, IS 302-1)	-	0	Testing charges included in Cl .11
11(Heating, IS 302-1)	-	0	Testing charges included in Cl .11
11(Heating, IS 302-1)	-	0	Testing charges included in Cl .11
13(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	3000	-
13(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	0	Testing charges included in Cl .13
14(Transient Over Voltages, IS 302-1)	-	2000	-
15.1(Moisture Resistance, IS 302-1)	-	0	Testing charges included in Cl .15
15.2(Moisture Resistance, IS 302-1)	-	0	Testing charges included in Cl .15
15(Moisture Resistance, IS 302-1)	-	4000	-
16(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	3000	-
16(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	0	Testing charges included in Cl .16
17(Overload protection of Transformers and Associated Circuits, IS 302-1)	-	4000	-
17(Overload protection of Transformers and Associated Circuits, IS 302-1)	-	0	Testing charges included in Cl .17
19.7(Abnormal Operation, IS 302-1)	-	0	Testing charges included in Cl .19.1
19.8(Abnormal Operation, IS 302-1)	-	0	Testing charges included in Cl .19.1
19.9(Abnormal Operation, IS 302-1)	-	0	Testing charges included in Cl .19.1
19.1(Abnormal Operation, IS 302-1)	-	6000	-
19.101(Abnormal Operation)	-	0	Testing charges included in Cl .19.1
19.102(Abnormal Operation)	-	0	Testing charges included in Cl .19.1
20.1(Stability & Mechanical Hazards, IS 302-1)	-	5000	-
20.2(Stability & Mechanical Hazards, IS 302-1)	-	0	Testing charges included in Cl .20.1
20.101(Stability & Mechanical Hazards)	-	0	Testing charges included in Cl .20.1
20.102(Stability & Mechanical Hazards)	-	0	Testing charges included in Cl .20.1
20.103(Stability & Mechanical Hazards)	-	0	Testing charges included in Cl .20.1
20.104(Stability & Mechanical Hazards)	-	0	Testing charges included in Cl .20.1
20.105(Stability & Mechanical Hazards)	-	0	Testing charges included in Cl .20.1
20.106(Stability & Mechanical Hazards)	-	0	Testing charges included in Cl .20.1
20.107(Stability & Mechanical Hazards)	-	0	Testing charges included in Cl .20.1
20.108(Stability & Mechanical Hazards)	-	0	Testing charges included in Cl .20.1
20.109(Stability & Mechanical Hazards)	-	0	Testing charges included in Cl .20.1
20.110(Stability & Mechanical Hazards)	-	0	Testing charges included in Cl .20.1
20.111(Stability & Mechanical Hazards)	-	0	Testing charges included in Cl .20.1
20.112(Stability & Mechanical Hazards)	-	0	Testing charges included in Cl .20.1
20.113(Stability & Mechanical Hazards)	-	0	Testing charges included in Cl .20.1
20.114(Stability & Mechanical Hazards)	-	0	Testing charges included in Cl .20.1
20.115(Stability & Mechanical Hazards)	-	0	Testing charges included in Cl .20.1
20.116(Stability & Mechanical Hazards)	-	0	Testing charges included in Cl .20.1
21.1(Mechanical Strength, IS 302-1)	-	1500	-
21.2(Mechanical Strength, IS 302-1)	-	0	Testing charges included in Cl .21.1
22(Construction, IS 302-1)	-	7000	-
22.101(Construction)	-	0	Testing charges included in Cl .22
22.102(Construction)	-	0	Testing charges included in Cl .22
23.1(Internal Wiring, IS 302-1)	-	2000	-
23.2(Internal Wiring, IS 302-1)	-	0	Testing charges included in Cl .23
23.3(Internal Wiring, IS 302-1)	-	0	Testing charges included in Cl .23
23.4(Internal Wiring, IS 302-1)	-	0	Testing charges included in Cl .23
23.5(Internal Wiring, IS 302-1)	-	0	Testing charges included in Cl .23
23.6(Internal Wiring, IS 302-1)	-	0	Testing charges included in Cl .23
23.7(Internal Wiring, IS 302-1)	-	0	Testing charges included in Cl .23
23.8(Internal Wiring, IS 302-1)	-	0	Testing charges included in Cl .23
23.9(Internal Wiring, IS 302-1)	-	0	Testing charges included in Cl .23
23.10(Internal Wiring, IS 302-1)	-	0	Testing charges included in Cl .23
24.1(Components, IS 302-1)	-	4500	-
24.2(Components, IS 302-1)	-	0	Testing charges included in Cl .24
24.5(Components, IS 302-1)	-	0	Testing charges included in Cl .24
24.6(Components, IS 302-1)	-	0	Testing charges included in Cl .24
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.5(Supply Connection and External Flexible Cords, IS 302-1)	-	0	Testing charges included in Cl .25
25.6(Supply Connection and External Flexible Cords, IS 302-1)	-	0	Testing charges included in Cl .25
25.7(Supply Connection and External Flexible Cords, IS 302-1)	-	0	Testing charges included in Cl .25
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	0	Testing charges included in Cl .25
26.9(Supply Connection and External Flexible Cords, IS 302-1)	-	0	Testing charges included in Cl .26.1
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	0	Testing charges included in Cl .25
25.11(Supply Connection and External Flexible Cords, IS 302-1)	-	0	Testing charges included in Cl .25
25.12(Supply Connection and External Flexible Cords, IS 302-1)	-	0	Testing charges included in Cl .25
25.13(Supply Connection and External Flexible Cords, IS 302-1)	-	0	Testing charges included in Cl .25
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	0	Testing charges included in Cl .25
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	0	Testing charges included in Cl .25
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	0	Testing charges included in Cl .25
25.16(Supply Connection and External Flexible Cords, IS 302-1)	-	0	Testing charges included in Cl .25
25.17(Supply Connection and External Flexible Cords, IS 302-1)	-	0	Testing charges included in Cl .25
25.18(Supply Connection and External Flexible Cords, IS 302-1)	-	0	Testing charges included in Cl .25
25.19(Supply Connection and External Flexible Cords, IS 302-1)	-	0	Testing charges included in Cl .25
25.2(Supply Connection and External Flexible Cords, IS 302-1)	-	0	Testing charges included in Cl .25
25.21(Supply Connection and External Flexible Cords, IS 302-1)	-	0	Testing charges included in Cl .25
25.22(Supply Connection and External Flexible Cords, IS 302-1)	-	0	Testing charges included in Cl .25
26(Terminals for External Conductors, IS 302-1)	-	1000	-
27(Provision for Earthing, IS 302-1)	-	2000	-
27.2(Provision for Earthing, IS 302-1)	-	0	Testing charges included in Cl .27
27.3(Provision for Earthing, IS 302-1)	-	0	Testing charges included in Cl .27
27.4(Provision for Earthing, IS 302-1)	-	0	Testing charges included in Cl .27
27.5(Provision for Earthing, IS 302-1)	-	0	Testing charges included in Cl .27
28(Screws & Connections, IS 302-1)	-	1000	-
29.1(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	2000	-
29.2(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	0	Testing charges included in Cl .29
30.1(Resistance to Heat and Fire, IS 302-1)	-	1000	-
30.2(Resistance to Heat and Fire, IS 302-1)	-	1000	-
31(Resistance of Rusting, IS 302-1)	-	1000	-
32(Radiation, Toxicity and similar Hazard IS 302-1)	-	0	-
4(GENERAL REQUIREMENTS)	-	0	-
5(GENERAL CONDITIONS FOR THE TESTS)	-	0	-
27(Provision for Earthing)	-	0	Testing charges included in Cl .27
29(Clearances, Creepage distances and Solid Insulation)	-	0	Testing charges included in Cl .29

31 Dec, 2026

-
Included w.e.f.20.06.2025 Exclusion (EMI/EMC)Cl 19.11.4.1 TO Cl 19.11.4.7

IS 302 : Part 2 : Sec 13 (2024)

Household and Similar Electrical Appliances âSafety Part 2 Particular Requirements Section 13 Deep Fat Fryers, Frying Pans and Similar Appliances (First Revision)

57500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking and instructions)	-	2000	-
8(Protection against access to live parts)	-	2000	-
10(Power input and current)	-	2000	-
11(Heating)	-	4000	-
13.1 &13.2(Leakage current test)	-	1500	-
13.1 &13.3(Electric strength test)	-	1500	-
14(Transient overvoltages)	-	2000	-
15(Moisture resistance)	-	2000	-
15.3(Moisture resistance)	-	2000	-
15.101(Moisture resistance)	-	1000	-
16.1 &16.2(Leakage current test)	-	1500	-
16.1 & 16.3(Electric strength test)	-	1500	-
17(Overload protection of transformers and associated circuits)	-	4000	-
19.1 to 19.13, Table No. - 9(Abnormal operation)	-	3500	-
19.101 to to 19.102(Abnormal operation)	-	1500	-
20(Stability and mechanical hazards)	-	2000	-
21(Mechanical strength)	-	3000	-
22(Construction)	-	5000	-
22.101(Construction)	-	500	-
23(Internal wiring)	-	2000	-
24(Components)	-	3000	-
25("Supply connection and external flexible cords")	-	1000	-
26("Terminals for external conductors")	-	1000	-
27(Provision for earthing)	-	2000	-
28(Screws and connections)	-	1000	-
29("Clearances, creepage distances and solid insulation")	-	2000	-
30(Resistance to heat and fire)	-	3000	-
31(Resistance to rusting)	-	0	-
32("Radiation, toxicity and similar hazards")	-	0	-
7(Marking and instructions)	-	0	-
8(Protection against access to live parts)	-	0	-
10(Power input and current)	-	0	-
11(Heating)	-	0	-
13.1 &13.2(Leakage current test)	-	0	-
13.1 &13.3(Electric strength test)	-	0	-
14(Transient overvoltages)	-	0	-
15(Moisture resistance)	-	0	-
15.3(Moisture resistance)	-	0	-
15.101(Moisture resistance)	-	0	-
16.1 &16.2(Leakage current test)	-	0	-
16.1 & 16.3(Electric strength test)	-	0	-
17(Overload protection of transformers and associated circuits)	-	0	-
19.1 to 19.13, Table No. - 9(Abnormal operation)	-	0	-
19.101 to to 19.102(Abnormal operation)	-	0	-
20(Stability and mechanical hazards)	-	0	-
21(Mechanical strength)	-	0	-
22(Construction)	-	0	-
22.101(Construction)	-	0	-
23(Internal wiring)	-	0	-
24(Components)	-	0	-
25("Supply connection and external flexible cords")	-	0	-
26("Terminals for external conductors")	-	0	-
27(Provision for earthing)	-	0	-
28(Screws and connections)	-	0	-
29("Clearances, creepage distances and solid insulation")	-	0	-
30(Resistance to heat and fire)	-	0	-
31(Resistance to rusting)	-	0	-
32("Radiation, toxicity and similar hazards")	-	0	-
7(Marking and instructions)	-	0	-
8(Protection against access to live parts)	-	0	-
10(Power input and current)	-	0	-
11(Heating)	-	0	-
13.1 &13.2(Leakage current test)	-	0	-
13.1 &13.3(Electric strength test)	-	0	-
14(Transient overvoltages)	-	0	-
15(Moisture resistance)	-	0	-
15.3(Moisture resistance)	-	0	-
15.101(Moisture resistance)	-	0	-
16.1 &16.2(Leakage current test)	-	0	-
16.1 & 16.3(Electric strength test)	-	0	-
17(Overload protection of transformers and associated circuits)	-	0	-
19.1 to 19.13, Table No. - 9(Abnormal operation)	-	0	-
19.101 to to 19.102(Abnormal operation)	-	0	-
20(Stability and mechanical hazards)	-	0	-
21(Mechanical strength)	-	0	-
22(Construction)	-	0	-
22.101(Construction)	-	0	-
23(Internal wiring)	-	0	-
24(Components)	-	0	-
25("Supply connection and external flexible cords")	-	0	-
26("Terminals for external conductors")	-	0	-
27(Provision for earthing)	-	0	-
28(Screws and connections)	-	0	-
29("Clearances, creepage distances and solid insulation")	-	0	-
30(Resistance to heat and fire)	-	0	-
31(Resistance to rusting)	-	0	-
32("Radiation, toxicity and similar hazards")	-	0	-

31 Dec, 2026

-
Included w.e.f.16.07.2025 Exclusion Cl 19.11.4.1 to Cl 19.11.4.7 EMI/EMC Only Cl 32

IS 302 : Part 2 : Sec 9 (2009)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 9 toasters, grills, roasters and similar appliances (First Revision)

59500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.32(Verification)	-	0	Testing Charges included in Cl 32
Cl.31(Verification)	-	0	Testing Charges included in Cl 31
Cl.30(Verification)	-	0	Testing Charges included in Cl 30
CL.29(Verification)	-	0	Testing Charges included in Cl 29
Cl.28(Verification)	-	0	Testing Charges included in Cl 28
Cl.27(Verification)	-	0	Testing Charges included in Cl 27
Cl.26(Verification)	-	0	Testing Charges included in Cl 26
Cl.25(Verification)	-	0	Testing Charges included in Cl 25
Cl.24(Verification)	-	0	Testing Charges included in Cl 24
Cl.23(Verification)	-	0	Testing Charges included in Cl 23
Cl.22(Verification)	-	0	Testing Charges included in Cl 22
Cl.21(Verification)	-	0	Testing Charges included in Cl 21
Cl.20(Verification)	-	0	Testing Charges included in Cl 20
Cl.19(Verification)	-	0	Testing Charges included in Cl 19
Cl. 16(Verification)	-	0	Testing Charges included in Cl 16
Cl.15.1(Moisture Resistance)	-	0	Testing Charges included in Cl 15
Cl.14(Verification)	-	0	Testing Charges included in Cl 14
Cl.13(Verification)	-	0	Testing Charges included in Cl 13
Cl.11(Verification)	-	0	Testing Charges included in Cl 11
Cl.10(Verification)	-	0	Testing Charges included in Cl 10
Cl.8(Verification)	-	0	Testing Charges included in Cl 8
Cl. 7(Verification)	-	0	Testing Charges included in Cl 7
Cl. 6(Classification- IS 302-1)	-	0	Testing Charges included in Cl 6
Cl. 32 IS 302-2-9(Radiation, Toxicity and similar hazards)	-	0	-
Cl. 31 IS 302-2-9(Resistance To Rusting )	-	1000	-
Cl. 30 IS 302-2-9(Resistance To Heat, Fire And Tracking)	-	3000	-
Cl. 29 IS 302-2-9(Creepage Distances, Clearances And Distances Through Insulation)	-	2000	-
Cl. 28 IS 302-2-9(Screws and Connections)	-	1000	-
Cl. 27 IS 302-2-9(Provision For Earthing )	-	2000	-
Cl. 26 IS 302-2-9(Terminal For External Conductors )	-	1000	-
Cl. 25 IS 302-2-9(Supply Connections and External Flexible Cables and Cords )	-	1000	-
Cl. 24 IS 302-2-9(Components)	-	4000	-
Cl. 23 IS 302-2-9(Internal Wiring)	-	2000	-
Cl. 22 IS 302-2-9(Construction )	-	5000	-
Cl. 21 IS 302-2-9(Mechanical Strength)	-	2000	-
Cl. 20 IS 302-2-9(Stability and mechanical Hazards)	-	2000	-
Cl. 19 IS 302-2-9(Abnormal Operation )	-	6000	-
Cl. 18 IS 302-2-9(Endurance)	-	0	-
Cl. 17 IS 302-2-9(Overload protection of transformers and associated circuits.)	-	4000	-
Cl. 16 IS 302-2-9(Leakage Current and Electric strength )	-	3000	-
Cl. 15 IS 302-2-9(Moisture Resistance)	-	4500	-
Cl. 14 IS 302-2-9(Transient overvoltage)	-	2000	-
Cl. 13.3 IS 302-2-9(Leakage Current & Electric Strength at Operating Temperature)	-	3000	-
Cl. 11 IS 302-2-9(Heating)	-	4500	-
Cl. 10 IS 302-2-9(Power Input and Current )	-	2000	-
Cl. 9 IS 302-2-9(Starting of motor operated appliances)	-	0	-
Cl. 8 IS 302-2-9(Protection against access to live parts)	-	2000	-
Cl. 7 IS 302-2-9(Marking and Instruction)	-	2000	-
Cl. 6 IS 302-2-9(Classification- IS 302-1)	-	0	-
32(Radiation, toxicity and similar hazards)	-	0	-
31(Resistance to rusting)	-	0	Testing Charges included in Cl 31
31(Resistance to rusting)	-	0	Testing Charges included in Cl 31
30.2.4(Resistance to heat and fire)	-	0	Testing Charges included in Cl 30
30.2(Resistance to heat and fire)	-	0	Testing Charges included in Cl 30
30.1(Resistance to heat and fire)	-	0	Testing Charges included in Cl 30
29.3(Clearances, creepage distances and solid insulation)	-	0	Testing Charges included in Cl 29
29.2(Clearances, creepage distances and solid insulation)	-	0	Testing Charges included in Cl 29
29.2(Clearances, creepage distances and solid insulation)	-	0	Testing Charges included in Cl 29
29.1, Table No.- 16, Table No.- 17 & Table No.18(Clearances, creepage distances and solid insulation)	-	0	Testing Charges included in Cl 29
29.1, Table No.- 16, Table No.- 17 & Table No.18(Clearances, creepage distances and solid insulation)	-	0	Testing Charges included in Cl 29
28.2 to 28.4(Screws and connections)	-	0	Testing Charges included in Cl 28
28.1, Table No.-14(Screws and connections)	-	0	Testing Charges included in Cl 28
27.6(Provision for earthing)	-	0	Testing Charges included in Cl 27
27.5(Provision for earthing)	-	0	Testing Charges included in Cl 27
27.1 to 27.4(Provision for earthing)	-	0	Testing Charges included in Cl 27
26.10 & 26.11(Terminals for external conductors)	-	0	Testing Charges included in Cl 26
26.9(Terminals for external conductors)	-	0	Testing Charges included in Cl 26
26.1 to 26.8(Terminals for external conductors)	-	0	Testing Charges included in Cl 26
25.16 to 25.25(Supply connection and external flexible cords)	-	0	Testing Charges included in Cl 25
25.15(Supply connection and external flexible cords)	-	0	Testing Charges included in Cl 25
25.14(Supply connection and external flexible cords)	-	0	Testing Charges included in Cl 25
25.14(Supply connection and external flexible cords)	-	0	Testing Charges included in Cl 25
25.9 to 25.13(Supply connection and external flexible cords)	-	0	Testing Charges included in Cl 25
25.8, Table No.-11(Supply connection and external flexible cords)	-	0	Testing Charges included in Cl 25
25.5 to 25.7(Supply connection and external flexible cords)	-	0	Testing Charges included in Cl 25
25.4(Supply connection and external flexible cords)	-	0	Testing Charges included in Cl 25
25.3(Supply connection and external flexible cords)	-	0	Testing Charges included in Cl 25
25.2(Supply connection and external flexible cords)	-	0	Testing Charges included in Cl 25
25.1(Supply connection and external flexible cords)	-	0	Testing Charges included in Cl 25
24.101(Components)	-	0	Testing Charges included in Cl 24
24.101(Components)	-	0	Testing Charges included in Cl 24
24.2 to 24.6(Components)	-	0	Testing Charges included in Cl 24
24.1(Components)	-	0	Testing Charges included in Cl 24
23.6 to 23.10(Internal wiring)	-	0	Testing Charges included in Cl 23
23.5(Internal wiring)	-	0	Testing Charges included in Cl 23
23.4(Internal wiring)	-	0	Testing Charges included in Cl 23
23.3(Internal wiring)	-	0	Testing Charges included in Cl 23
23.1 & 23.2(Internal wiring)	-	0	Testing Charges included in Cl 23
22.111(Constructions)	-	0	Testing Charges included in Cl 22
22.111(Constructions)	-	0	Testing Charges included in Cl 22
22.11o(Constructions)	-	0	Testing Charges included in Cl 22
22.109(Constructions)	-	0	Testing Charges included in Cl 22
22.108(Constructions)	-	0	Testing Charges included in Cl 22
22.101 to 22.107(Constructions)	-	0	Testing Charges included in Cl 22
22.13 to 22.48(Constructions)	-	0	Testing Charges included in Cl 22
22.12(Constructions)	-	0	Testing Charges included in Cl 22
22.11(Constructions)	-	0	Testing Charges included in Cl 22
22.11(Constructions)	-	0	Testing Charges included in Cl 22
22.7 to 22.10(Constructions)	-	0	Testing Charges included in Cl 22
22.6(Constructions)	-	0	Testing Charges included in Cl 22
22.5(Constructions)	-	0	Testing Charges included in Cl 22
22.4(Constructions)	-	0	Testing Charges included in Cl 22
22.3(Constructions)	-	0	Testing Charges included in Cl 22
22.2(Constructions)	-	0	Testing Charges included in Cl 22
22.1(Constructions)	-	0	Testing Charges included in Cl 22
21.101(MECHANICAL STRENGTH)	-	0	Testing Charges included in Cl 21
21.101(MECHANICAL STRENGTH)	-	0	Testing Charges included in Cl 21
21.2(MECHANICAL STRENGTH)	-	0	Testing Charges included in Cl 21
21.1(MECHANICAL STRENGTH)	-	0	Testing Charges included in Cl 21
20.2(Stability and mechanical hazards)	-	0	Testing Charges included in Cl 20
20.1(Stability and mechanical hazards)	-	0	Testing Charges included in Cl 20
19.104(ABNORMAL OPERATION)	-	0	Testing Charges included in Cl 19
19.103(ABNORMAL OPERATION)	-	0	Testing Charges included in Cl 19
19.102(ABNORMAL OPERATION)	-	0	Testing Charges included in Cl 19
19.101(ABNORMAL OPERATION)	-	0	Testing Charges included in Cl 19
19.1 to 19.13, Table No. - 9(ABNORMAL OPERATION)	-	0	Testing Charges included in Cl 19
17(Overload protection of transformers and associated circuits)	-	0	Testing Charges included in Cl 17
16.3(Insulation resistance test)	-	0	Testing Charges included in Cl 16
16.3(Electric strength test)	-	0	Testing Charges included in Cl 16
16.1 & 16.2(Leakage current test)	-	0	Testing Charges included in Cl 16
15.3(Moisture resistance)	-	0	Testing Charges included in Cl 15
15.3(Moisture resistance)	-	0	Testing Charges included in Cl 15
15.3(Moisture resistance)	-	0	Testing Charges included in Cl 15
15.2(Moisture resistance)	-	0	Testing Charges included in Cl 15
15.2(Moisture resistance)	-	0	Testing Charges included in Cl 15
15.2(Moisture resistance)	-	0	Testing Charges included in Cl 15
15.2(Moisture resistance)	-	0	Testing Charges included in Cl 15
15.1(Moisture resistance)	-	0	Testing Charges included in Cl 15
14, Table No.- 6 & Table No.-16(Transient over voltages)	-	0	Testing Charges included in Cl 14
13.3 and Table No.- 4(Electric strength test)	-	0	Testing Charges included in Cl 13
13.1, 13.2(Leakage current test)	-	0	Testing Charges included in Cl 13
13.1, 13.2(Leakage current test)	-	0	Testing Charges included in Cl 13
11.101(Heating)	-	0	Testing Charges included in Cl 11
11.1 to 11.8, Table No.-3(Heating)	-	0	Testing Charges included in Cl 11
10.1 & 10.2 -Table No. 1, Table No. 2(Power Input and Current)	-	0	Testing Charges included in Cl 10
8.1.5(Protection against access to live parts)	-	0	Testing Charges included in Cl 8
8.1.4(Protection against access to live parts)	-	0	Testing Charges included in Cl 8
8.1.3(Protection against access to live parts)	-	0	Testing Charges included in Cl 8
8.1.2(Protection against access to live parts)	-	0	Testing Charges included in Cl 8
8.1, 8.1.1 & 8.2(Protection against access to live parts)	-	0	Testing Charges included in Cl 8
7.14(Legibility & Durability of Markings test)	-	0	Testing Charges included in Cl 7
7.1 to 7.13, 7.15, 7.16(Marking)	-	0	Testing Charges included in Cl 7
32(Radiation, toxicity and similar hazards)	-	0	-
31(Resistance to rusting)	-	0	Testing Charges included in Cl 31
31(Resistance to rusting)	-	0	Testing Charges included in Cl 31
30.2.4(Resistance to heat and fire)	-	0	Testing Charges included in Cl 30
30.2(Resistance to heat and fire)	-	0	Testing Charges included in Cl 30
30.1(Resistance to heat and fire)	-	0	Testing Charges included in Cl 30
29.3(Clearances, creepage distances and solid insulation)	-	0	Testing Charges included in Cl 29
29.2(Clearances, creepage distances and solid insulation)	-	0	Testing Charges included in Cl 29
29.2(Clearances, creepage distances and solid insulation)	-	0	Testing Charges included in Cl 29
29.1, Table No.- 16, Table No.- 17 & Table No.18(Clearances, creepage distances and solid insulation)	-	0	Testing Charges included in Cl 29
29.1, Table No.- 16, Table No.- 17 & Table No.18(Clearances, creepage distances and solid insulation)	-	0	Testing Charges included in Cl 29
28.2 to 28.4(Screws and connections)	-	0	Testing Charges included in Cl 28
28.1, Table No.-14(Screws and connections)	-	0	Testing Charges included in Cl 28
27.6(Provision for earthing)	-	0	Testing Charges included in Cl 27
27.5(Provision for earthing)	-	0	Testing Charges included in Cl 27
27.1 to 27.4(Provision for earthing)	-	0	Testing Charges included in Cl 27
26.10 & 26.11(Terminals for external conductors)	-	0	Testing Charges included in Cl 26
26.9(Terminals for external conductors)	-	0	Testing Charges included in Cl 26
26.1 to 26.8(Terminals for external conductors)	-	0	Testing Charges included in Cl 26
25.16 to 25.25(Supply connection and external flexible cords)	-	0	Testing Charges included in Cl 25
25.15(Supply connection and external flexible cords)	-	0	Testing Charges included in Cl 25
25.14(Supply connection and external flexible cords)	-	0	Testing Charges included in Cl 25
25.14(Supply connection and external flexible cords)	-	0	Testing Charges included in Cl 25
25.9 to 25.13(Supply connection and external flexible cords)	-	0	Testing Charges included in Cl 25
25.8, Table No.-11(Supply connection and external flexible cords)	-	0	Testing Charges included in Cl 25
25.5 to 25.7(Supply connection and external flexible cords)	-	0	Testing Charges included in Cl 25
25.4(Supply connection and external flexible cords)	-	0	Testing Charges included in Cl 25
25.3(Supply connection and external flexible cords)	-	0	Testing Charges included in Cl 25
25.2(Supply connection and external flexible cords)	-	0	Testing Charges included in Cl 25
25.1(Supply connection and external flexible cords)	-	0	Testing Charges included in Cl 25
24.101(Components)	-	0	Testing Charges included in Cl 24
24.101(Components)	-	0	Testing Charges included in Cl 24
24.2 to 24.6(Components)	-	0	Testing Charges included in Cl 24
24.1(Components)	-	0	Testing Charges included in Cl 24
23.6 to 23.10(Internal wiring)	-	0	Testing Charges included in Cl 23
23.5(Internal wiring)	-	0	Testing Charges included in Cl 23
23.4(Internal wiring)	-	0	Testing Charges included in Cl 23
23.3(Internal wiring)	-	0	Testing Charges included in Cl 23
23.1 & 23.2(Internal wiring)	-	0	Testing Charges included in Cl 23
22.111(Constructions)	-	0	Testing Charges included in Cl 22
22.111(Constructions)	-	0	Testing Charges included in Cl 22
22.11o(Constructions)	-	0	Testing Charges included in Cl 22
22.109(Constructions)	-	0	Testing Charges included in Cl 22
22.108(Constructions)	-	0	Testing Charges included in Cl 22
22.101 to 22.107(Constructions)	-	0	Testing Charges included in Cl 22
22.13 to 22.48(Constructions)	-	0	Testing Charges included in Cl 22
22.12(Constructions)	-	0	Testing Charges included in Cl 22
22.11(Constructions)	-	0	Testing Charges included in Cl 22
22.11(Constructions)	-	0	Testing Charges included in Cl 22
22.7 to 22.10(Constructions)	-	0	Testing Charges included in Cl 22
22.6(Constructions)	-	0	Testing Charges included in Cl 22
22.5(Constructions)	-	0	Testing Charges included in Cl 22
22.4(Constructions)	-	0	Testing Charges included in Cl 22
22.3(Constructions)	-	0	Testing Charges included in Cl 22
22.2(Constructions)	-	0	Testing Charges included in Cl 22
22.1(Constructions)	-	0	Testing Charges included in Cl 22
21.101(MECHANICAL STRENGTH)	-	0	Testing Charges included in Cl 21
21.101(MECHANICAL STRENGTH)	-	0	Testing Charges included in Cl 21
21.2(MECHANICAL STRENGTH)	-	0	Testing Charges included in Cl 21
21.1(MECHANICAL STRENGTH)	-	0	Testing Charges included in Cl 21
20.2(Stability and mechanical hazards)	-	0	Testing Charges included in Cl 20
20.1(Stability and mechanical hazards)	-	0	Testing Charges included in Cl 20
19.104(ABNORMAL OPERATION)	-	0	Testing Charges included in Cl 19
19.103(ABNORMAL OPERATION)	-	0	Testing Charges included in Cl 19
19.102(ABNORMAL OPERATION)	-	0	Testing Charges included in Cl 19
19.101(ABNORMAL OPERATION)	-	0	Testing Charges included in Cl 19
19.1 to 19.13, Table No. - 9(ABNORMAL OPERATION)	-	0	Testing Charges included in Cl 19
17(Overload protection of transformers and associated circuits)	-	0	Testing Charges included in Cl 17
16.3(Insulation resistance test)	-	0	Testing Charges included in Cl 16
16.3(Electric strength test)	-	0	Testing Charges included in Cl 16
16.1 & 16.2(Leakage current test)	-	0	Testing Charges included in Cl 16
15.3(Moisture resistance)	-	0	Testing Charges included in Cl 15
15.3(Moisture resistance)	-	0	Testing Charges included in Cl 15
15.3(Moisture resistance)	-	0	Testing Charges included in Cl 15
15.2(Moisture resistance)	-	0	Testing Charges included in Cl 15
15.2(Moisture resistance)	-	0	Testing Charges included in Cl 15
15.2(Moisture resistance)	-	0	Testing Charges included in Cl 15
15.2(Moisture resistance)	-	0	Testing Charges included in Cl 15
15.1(Moisture resistance)	-	0	Testing Charges included in Cl 15
14, Table No.- 6 & Table No.-16(Transient over voltages)	-	0	Testing Charges included in Cl 14
13.3 and Table No.- 4(Electric strength test)	-	0	Testing Charges included in Cl 13
13.1, 13.2(Leakage current test)	-	0	Testing Charges included in Cl 13
13.1, 13.2(Leakage current test)	-	0	Testing Charges included in Cl 13
11.101(Heating)	-	0	Testing Charges included in Cl 11
11.1 to 11.8, Table No.-3(Heating)	-	0	Testing Charges included in Cl 11
10.1 & 10.2 -Table No. 1, Table No. 2(Power Input and Current)	-	0	Testing Charges included in Cl 10
8.1.5(Protection against access to live parts)	-	0	Testing Charges included in Cl 8
8.1.4(Protection against access to live parts)	-	0	Testing Charges included in Cl 8
8.1.3(Protection against access to live parts)	-	0	Testing Charges included in Cl 8
8.1.2(Protection against access to live parts)	-	0	Testing Charges included in Cl 8
8.1, 8.1.1 & 8.2(Protection against access to live parts)	-	0	Testing Charges included in Cl 8
7.14(Legibility & Durability of Markings test)	-	0	Testing Charges included in Cl 7
7.1 to 7.13, 7.15, 7.16(Marking)	-	0	Testing Charges included in Cl 7
32(Radiation ,Toxicity and similar hazards)	-	0	-
31(Resistance to Rusting)	-	0	Testing Charges included in Cl 31
30(Resistance to Heat & Fire)	-	0	Testing Charges included in Cl 30
29(Clearances, Creepage Distances & Solid Insulation)	-	0	Testing Charges included in Cl 29
28(Screws & Connections)	-	0	Testing Charges included in Cl 28
27(Provision For Earthing)	-	0	Testing Charges included in Cl 27
26(Terminals For External Conductors)	-	0	Testing Charges included in Cl 26
25(Supply Connection & External Flexible Cords)	-	0	Testing Charges included in Cl 25
24(Components)	-	0	Testing Charges included in Cl 24
23(Internal wiring)	-	0	Testing Charges included in Cl 23
22(Construction)	-	0	Testing Charges included in Cl 22
21(Mechanical strength)	-	0	Testing Charges included in Cl 21
20(Stability & Mechanical Hazards)	-	0	Testing Charges included in Cl 20
19(Abnormal Operation)	-	0	Testing Charges included in Cl 19
17(Overload Protection/ Overload Protection of Transformers & Associated Circuits)	-	0	Testing Charges included in Cl 17
16(Leakage Current and Electric Strength)	-	0	Testing Charges included in Cl 16
15(Moisture Resistance)	-	0	Testing Charges included in Cl 15
14(Transient Over Voltage)	-	0	Testing Charges included in Cl 14
13(Leakage Current and Electric Strength at Operating Temperature)	-	0	Testing Charges included in Cl 13
11(Temperature Rise/ Heating)	-	0	Testing Charges included in Cl 11
10(Power Input & Current)	-	0	Testing Charges included in Cl 10
9(Starting Of Motor Operated Appliances)	-	0	-
8(Protection against access to live parts)	-	0	Testing Charges included in Cl 8
32(Radiation ,Toxicity and similar hazards)	-	0	-
31(Resistance to Rusting)	-	0	Testing Charges included in Cl 31
30(Resistance to Heat & Fire)	-	0	Testing Charges included in Cl 30
29(Clearances, Creepage Distances & Solid Insulation)	-	0	Testing Charges included in Cl 29
28(Screws & Connections)	-	0	Testing Charges included in Cl 28
27(Provision For Earthing)	-	0	Testing Charges included in Cl 27
26(Terminals For External Conductors)	-	0	Testing Charges included in Cl 26
25(Supply Connection & External Flexible Cords)	-	0	Testing Charges included in Cl 25
24(Components)	-	0	Testing Charges included in Cl 24
23(Internal wiring)	-	0	Testing Charges included in Cl 23
22(Construction)	-	0	Testing Charges included in Cl 22
21(Mechanical strength)	-	0	Testing Charges included in Cl 21
20(Stability & Mechanical Hazards)	-	0	Testing Charges included in Cl 20
19(Abnormal Operation)	-	0	Testing Charges included in Cl 19
17(Overload Protection/ Overload Protection of Transformers & Associated Circuits)	-	0	Testing Charges included in Cl 17
16(Leakage Current and Electric Strength)	-	0	Testing Charges included in Cl 16
15(Moisture Resistance)	-	0	Testing Charges included in Cl 15
14(Transient Over Voltage)	-	0	Testing Charges included in Cl 14
13(Leakage Current and Electric Strength at Operating Temperature)	-	0	Testing Charges included in Cl 13
11(Temperature Rise/ Heating)	-	0	Testing Charges included in Cl 11
10(Power Input & Current)	-	0	Testing Charges included in Cl 10
9(Starting Of Motor Operated Appliances)	-	0	-
8(Protection against access to live parts)	-	0	Testing Charges included in Cl 8

31 Dec, 2026

-
Included w.e.f.20.06.2025 Exclusion (EMI/EMC)Cl 19.11.4.1 TO Cl 19.11.4.7

IS 302 : Part 2 : Sec 6 (2009)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 6 cooking ranges, hobs, ovens and similar appliances (First Revision)

60500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.0(Classification)	-	0	-
7.0(Marking and instructions)	-	2000	-
8.0(Protection against access to live part test)	-	2000	-
9.0(Starting of motor-operated appliances test)	-	0	-
10.0(Power Input and current test)	-	2000	-
11.0(Heating test)	-	5000	-
13.0(Leakage current and electric strength test)	-	3000	-
14.0(Transient voltages)	-	2000	-
15.0(Moisture Resistance)	-	4500	-
16.0(Leakage current and electric strength test)	-	3000	-
17.0(Overload protection of transformers test)	-	4000	-
18.0(Endurance test)	-	0	-
19.0(Abnormal Operations)	-	5000	-
20.0(Stability and Mechanical Hazards)	-	2000	-
21.0(Mechanical Strength)	-	2500	-
22.0(Construction verification related tests)	-	6000	-
23.0(Internal wiring)	-	2000	-
24.0(Components)	-	3000	-
25.0(Supply connections and External Flexible Cords)	-	1500	-
26.0(Terminal for External Conductors)	-	1000	-
27.0(Provision for Earthing)	-	2000	-
28.0(Screws and connections)	-	1000	-
29.0(Clearances and Creepage distances and solid insulation)	-	2000	-
30.0(Resistance to heat and fire)	-	3000	-
31.0(Resistance to rusting)	-	0	-
32.0(Radiation, Toxicity and Similar hazards)	-	1000	-
4(General Requirements)	-	0	-
5(General condition for the tests)	-	0	-
6.0(Classification)	-	0	-
7.0(Marking and instructions)	-	0	-
8.0(Protection against access to live part test)	-	0	-
9.0(Starting of motor-operated appliances test)	-	0	-
10.0(Power Input and current test)	-	0	-
11.0(Heating test)	-	0	-
13.0(Leakage current and electric strength test)	-	0	-
14.0(Transient voltages)	-	0	-
15.0(Moisture Resistance)	-	0	-
16.0(Leakage current and electric strength test)	-	0	-
17.0(Overload protection of transformers test)	-	0	-
18.0(Endurance test)	-	0	-
19.0(Abnormal Operations)	-	0	-
20.0(Stability and Mechanical Hazards)	-	0	-
21.0(Mechanical Strength)	-	0	-
22.0(Construction verification related tests)	-	0	-
23.0(Internal wiring)	-	0	-
24.0(Components)	-	0	-
25.0(Supply connections and External Flexible Cords)	-	0	-
26.0(Terminal for External Conductors)	-	0	-
27.0(Provision for Earthing)	-	0	-
28.0(Screws and connections)	-	0	-
29.0(Clearances and Creepage distances and solid insulation)	-	0	-
30.0(Resistance to heat and fire)	-	0	-
31.0(Resistance to rusting)	-	0	-
32.0(Radiation, Toxicity and Similar hazards)	-	0	-
4(General Requirements)	-	0	-
5(General condition for the tests)	-	0	-
22.111(Pyrolytic self-cleaning)	-	1000	-

31 Dec, 2026

-
Included w.e.f.20.06.2025 Exclusion (EMI/EMC)Cl 19.11.4.1 TO Cl 19.11.4.7

IS 302 : Part 1 (2008)

Safety of household and similar electrical appliances: Part 1 general requirements (Sixth Revision)

56000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking and instructions)	-	2000	-
8.1.1(Protection against live parts in all positions)	-	2000	-
8.1.2(Protection against live parts in openings)	-	0	Testing charges included in Cl.8.1.1
8.1.3(Protection against live parts in visible glowing heating elements)	-	0	Testing charges included in Cl.8.1.1
8.1.4(Protection against live parts against protective impedance)	-	0	Testing charges included in Cl.8.1.1
9(Starting of motor operation test requirements and tests)	-	0	-
10.1(Power input)	-	1000	-
10.2(Current input)	-	1000	-
11.1(General)	-	4000	-
11.2(General)	-	0	Testing charges included in Cl.11.1
11.3(Heating)	-	0	Testing charges included in Cl.11.1
13.1(General)	-	3000	-
13.2(Leakage current at operating temperature)	-	0	Testing charges included in Cl.13.1
13.3(Electric Strength at operating temperature)	-	0	Testing charges included in Cl.13.1
14(Transient Over Voltages)	-	2000	-
15.0(General)	-	4000	-
15.1(Ingress Protection test other than IPX0 (IP test))	-	0	Testing charges included in Cl.15
15.2(Spillage Test)	-	0	Testing charges included in Cl.15
15.3(Humidity Test)	-	0	Testing charges included in Cl.15
16.0(General)	-	3000	-
16.1(General)	-	0	Testing charges included in Cl.16
16.2(Leakage Current (after Clause 15))	-	0	Testing charges included in Cl.16
16.3(Electric Strength (after clause 15 and 16.2))	-	0	Testing charges included in Cl.16
17(Over Load Protection of Transformers and associated circuits)	-	4000	-
18(Endurance Test requirements and tests)	-	0	-
19(Abnormal Operation)	-	5000	-
20(Stability test)	-	2000	-
21(Mechanical Strength Test)	-	1500	-
22(Construction verification related test)	-	5000	-
23(General)	-	2000	-
24(Components)	-	3000	-
25(Supply connection and external flexible cords)	-	1000	-
26(Terminals for external conductors)	-	1000	-
27(Provision for earthing)	-	2000	-
28(Screw test and connections)	-	1000	-
29(clearance, creepage distances and solid insulation)	-	2000	-
30.1(Ball pressure test)	-	1000	-
30.2(Glow Wire Test)	-	1000	-
30.2(Needle Flame Test)	-	1000	-
31(Resistance to Rusting)	-	0	-
32(Radiation Toxicity and Similar Hazards)	-	0	-
4(General requirement)	-	0	-
16(Leakage current and electric strength)	-	0	Testing charges included in Cl.16
17(Overload protection of transformers and associated circuits)	-	0	Testing charges included in Cl.17
18(Endurance)	-	0	-
8.1.5(Live parts of built-in appliances)	-	0	Testing charges included in Cl.8.1.1
11.4(Heating appliances)	-	0	Testing charges included in Cl.11.1
11.5(Motor-operated appliances)	-	0	Testing charges included in Cl.11.1
11.6(Combined appliances)	-	0	Testing charges included in Cl.11.1
11.7(Duration corresponding)	-	0	Testing charges included in Cl.11.1
11.8(Temperature rise)	-	0	Testing charges included in Cl.11.1
4(General Requirement)	-	0	-
5(General conditions for tests)	-	0	-
6(Classification- IS 302-1)	-	0	-

31 Dec, 2026

-
Included w.e.f.20.06.2025 Exclusion (EMI/EMC)Cl 19.11.4.1 TO Cl 19.11.4.7

IS 302 : Part 1 (2024)

Household and Similar Electrical Appliances â Safety Part 1 General Requirements (Seventh Revision)

74000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
12(Charging of metal-ion batteries)	-	15000	-
6(Classification- IS 302-1)	-	0	-
5(General conditions for the tests)	-	0	-
11.8(Temperature rise)	-	0	Testing charges included in Cl.11.1
11.7(Duration corresponding)	-	0	Testing charges included in Cl.11.1
11.6(Combined appliances)	-	0	Testing charges included in Cl.11.1
11.5(Motor-operated appliances)	-	0	Testing charges included in Cl.11.1
11.4(Heating appliances)	-	0	Testing charges included in Cl.11.1
8.1.5(Live parts of built-in appliances)	-	0	Testing charges included in Cl.8.1.1
18(Endurance)	-	0	-
17(Overload protection of transformers and associated circuits)	-	4000	-
16(Leakage current and electric strength)	-	3000	-
4(General requirement)	-	0	-
32.1(Radiation Toxicity and Similar Hazards)	-	0	-
31(Resistance to Rusting)	-	0	-
30.2(Needle Flame Test)	-	1000	-
30.2(Glow Wire Test)	-	1000	-
30.1(Ball pressure test)	-	1000	-
29(clearance, creepage distances and solid insulation)	-	2000	-
28(Screw test and connections)	-	1000	-
27.1(Provision for Earthing, IS 302-1)	-	2000	-
26(Terminals for external conductors)	-	1000	-
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
24(Components)	-	3000	-
23.1(Internal Wiring, IS 302-1)	-	2000	-
22.1(Construction, IS 302-1)	-	5000	-
21.1(Mechanical Strength, IS 302-1)	-	3000	-
20.1(Stability & Mechanical Hazards, IS 302-1)	-	2000	-
19(Abnormal Operation)	-	5000	-
18(Endurance)	-	0	-
17(Over Load Protection of Transformers and associated circuits)	-	0	Testing charges included in Cl.17
16.3(Electric Strength (after clause 15 and 16.2))	-	0	Testing charges included in Cl.16
16.2(Leakage Current (after Clause 15))	-	0	Testing charges included in Cl.16
16.1(General)	-	0	Testing charges included in Cl.16
16.0(General)	-	0	Testing charges included in Cl.16
15.3(Humidity Test)	-	0	Testing charges included in Cl.15
15.2(Spillage Test)	-	0	Testing charges included in Cl.15
15.1(Ingress Protection test other than IPX0 (IP test))	-	0	Testing charges included in Cl.15
15.0(Moisture resistance)	-	4000	-
14(Transient Over Voltages)	-	2000	-
13.3(Electric Strength at operating temperature)	-	0	Testing charges included in Cl.13
13.2(Leakage current at operating temperature)	-	0	Testing charges included in Cl.13
13(Leakage current and electric strength at operating temperature)	-	3000	-
11.3(Heating)	-	0	Testing charges included in Cl.11.1
11.2(General)	-	0	Testing charges included in Cl.11.1
11.1(General)	-	4000	-
10.2(Current input)	-	1000	-
10.1(Power input)	-	1000	-
9(Starting of motor operation test requirements and tests)	-	0	-
8.1.4(Protection against live parts against protective impedance)	-	0	Testing charges included in Cl.8.1.1
8.1.3(Protection against live parts in visible glowing heating elements)	-	0	Testing charges included in Cl.8.1.1
8.1.2(Protection against live parts in openings)	-	0	Testing charges included in Cl.8.1.1
8.1.1(Protection against live parts in all positions)	-	2000	-
7(Marking and instructions)	-	2000	-
A.2(Earth continuity test)	-	0	Testing charges included in Cl.27
Annex C(Ageing test on motors)	-	0	-
Annex D(Thermal motor protectors)	-	0	-
15.2(Moisture resistance)	-	0	Testing charges included in Cl.15
19.17(Abnormal Operation, IS 302-1)	-	0	Testing charges included in Cl.19
20.2(Stability & Mechanical Hazards, IS 302-1)	-	0	Testing charges included in Cl.20
21.2(Mechanical Strength, IS 302-1)	-	0	Testing charges included in Cl.21
21.3(Mechanical Strength, IS 302-1)	-	0	Testing charges included in Cl.21
22.5(Construction)	-	0	Testing charges included in Cl.22
22.6(Construction, IS 302-1)	-	0	Testing charges included in Cl.22
22.11(Construction, IS 302-1)	-	0	Testing charges included in Cl.22
22.16(Construction)	-	0	Testing charges included in Cl.22
22.32(Construction, IS 302-1)	-	0	Testing charges included in Cl.22
22.42(Construction)	-	0	Testing charges included in Cl.22
23.3(Internal Wiring, IS 302-1)	-	0	Testing charges included in Cl.23
25.6(Supply connection and external flexible cords, IS 302-1)	-	0	Testing charges included in Cl.25
25.7(Supply Connection and External Flexible Cords, IS 302-1)	-	0	Testing charges included in Cl.25
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	0	Testing charges included in Cl.25
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	0	Testing charges included in Cl.25
26.5(Terminals for external conductors)	-	0	Testing charges included in Cl.26
27.5(Provision for Earthing, IS 302-1)	-	0	Testing charges included in Cl.27
28.1(Screws and connections)	-	0	Testing charges included in Cl.28
22.2(Construction, IS 302-1)	-	0	Testing charges included in Cl.22
22.3(Construction, IS 302-1)	-	0	Testing charges included in Cl.22
B.22.4(Construction, IS 302-1)	-	0	Testing charges included in Cl.22
B.22.5(Construction, IS 302-1)	-	0	Testing charges included in Cl.22
12(Charging of metal-ion batteries)	-	0	Testing charges included in Cl.12
6(Classification- IS 302-1)	-	0	-
5(General conditions for the tests)	-	0	-
11.8(Temperature rise)	-	0	Testing charges included in Cl.11.1
11.7(Duration corresponding)	-	0	Testing charges included in Cl.11.1
11.6(Combined appliances)	-	0	Testing charges included in Cl.11.1
11.5(Motor-operated appliances)	-	0	Testing charges included in Cl.11.1
11.4(Heating appliances)	-	0	Testing charges included in Cl.11.1
8.1.5(Live parts of built-in appliances)	-	0	Testing charges included in Cl.8.1.1
18(Endurance)	-	0	-
17(Overload protection of transformers and associated circuits)	-	0	Testing charges included in Cl.17
16(Leakage current and electric strength)	-	0	Testing charges included in Cl.16
4(General requirement)	-	0	-
32.1(Radiation Toxicity and Similar Hazards)	-	0	-
31(Resistance to Rusting)	-	0	-
30.2(Needle Flame Test)	-	0	Testing charges included in Cl.30.2
30.2(Glow Wire Test)	-	0	Testing charges included in Cl.30.2
30.1(Ball pressure test)	-	0	Testing charges included in Cl.30.1
29(clearance, creepage distances and solid insulation)	-	0	Testing charges included in Cl.29
28(Screw test and connections)	-	0	Testing charges included in Cl.28
27.1(Provision for Earthing, IS 302-1)	-	0	Testing charges included in Cl.27
26(Terminals for external conductors)	-	0	Testing charges included in Cl.26
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	0	Testing charges included in Cl.25
24(Components)	-	0	Testing charges included in Cl.24
23.1(Internal Wiring, IS 302-1)	-	0	Testing charges included in Cl.23
22.1(Construction, IS 302-1)	-	0	Testing charges included in Cl.22
21.1(Mechanical Strength, IS 302-1)	-	0	Testing charges included in Cl.21
20.1(Stability & Mechanical Hazards, IS 302-1)	-	0	Testing charges included in Cl.21
19(Abnormal Operation)	-	0	Testing charges included in Cl.19
18(Endurance)	-	0	-
17(Over Load Protection of Transformers and associated circuits)	-	0	Testing charges included in Cl.17
16.3(Electric Strength (after clause 15 and 16.2))	-	0	Testing charges included in Cl.16
16.2(Leakage Current (after Clause 15))	-	0	Testing charges included in Cl.16
16.1(General)	-	0	Testing charges included in Cl.16
16.0(General)	-	0	Testing charges included in Cl.16
15.3(Humidity Test)	-	0	Testing charges included in Cl.15
15.2(Spillage Test)	-	0	Testing charges included in Cl.15
15.1(Ingress Protection test other than IPX0 (IP test))	-	0	Testing charges included in Cl.15
15.0(Moisture resistance)	-	0	Testing charges included in Cl.15
14(Transient Over Voltages)	-	0	Testing charges included in Cl.14
13.3(Electric Strength at operating temperature)	-	0	Testing charges included in Cl.13
13.2(Leakage current at operating temperature)	-	0	Testing charges included in Cl.13
13(Leakage current and electric strength at operating temperature)	-	0	Testing charges included in Cl.13
11.3(Heating)	-	0	Testing charges included in Cl.11.1
11.2(General)	-	0	Testing charges included in Cl.11.1
11.1(General)	-	0	Testing charges included in Cl.11.1
10.2(Current input)	-	0	Testing charges included in Cl.10.2
10.1(Power input)	-	0	Testing charges included in Cl.10.1
9(Starting of motor operation test requirements and tests)	-	0	-
8.1.4(Protection against live parts against protective impedance)	-	0	Testing charges included in Cl.8.1.1
8.1.3(Protection against live parts in visible glowing heating elements)	-	0	Testing charges included in Cl.8.1.1
8.1.2(Protection against live parts in openings)	-	0	Testing charges included in Cl.8.1.1
8.1.1(Protection against live parts in all positions)	-	0	Testing charges included in Cl.8.1.1
7(Marking and instructions)	-	0	Testing charges included in Cl.7
A.2(Earth continuity test)	-	0	Testing charges included in Cl.27
Annex C(Ageing test on motors)	-	0	-
Annex D(Thermal motor protectors)	-	0	-
15.2(Moisture resistance)	-	0	Testing charges included in Cl.15
19.17(Abnormal Operation, IS 302-1)	-	0	Testing charges included in Cl.19
20.2(Stability & Mechanical Hazards, IS 302-1)	-	0	Testing charges included in Cl.20
21.2(Mechanical Strength, IS 302-1)	-	0	Testing charges included in Cl.21
21.3(Mechanical Strength, IS 302-1)	-	0	Testing charges included in Cl.21
22.5(Construction)	-	0	Testing charges included in Cl.22
22.6(Construction, IS 302-1)	-	0	Testing charges included in Cl.22
22.11(Construction, IS 302-1)	-	0	Testing charges included in Cl.22
22.16(Construction)	-	0	Testing charges included in Cl.22
22.32(Construction, IS 302-1)	-	0	Testing charges included in Cl.22
22.42(Construction)	-	0	Testing charges included in Cl.22
23.3(Internal Wiring, IS 302-1)	-	0	Testing charges included in Cl.23
25.6(Supply connection and external flexible cords, IS 302-1)	-	0	Testing charges included in Cl.25
25.7(Supply Connection and External Flexible Cords, IS 302-1)	-	0	Testing charges included in Cl.25
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	0	Testing charges included in Cl.25
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	0	Testing charges included in Cl.25
26.5(Terminals for external conductors)	-	0	Testing charges included in Cl.26
27.5(Provision for Earthing, IS 302-1)	-	0	Testing charges included in Cl.27
28.1(Screws and connections)	-	0	Testing charges included in Cl.28
22.2(Construction, IS 302-1)	-	0	Testing charges included in Cl.22
22.3(Construction, IS 302-1)	-	0	Testing charges included in Cl.22
B.22.4(Construction, IS 302-1)	-	0	Testing charges included in Cl.22
B.22.5(Construction, IS 302-1)	-	0	Testing charges included in Cl.22
12(Charging of metal-ion batteries)	-	-	-
6(Classification- IS 302-1)	-	-	-
5(General conditions for the tests)	-	-	-
11.8(Temperature rise)	-	-	-
11.7(Duration corresponding)	-	-	-
11.6(Combined appliances)	-	-	-
11.5(Motor-operated appliances)	-	-	-
11.4(Heating appliances)	-	-	-
8.1.5(Live parts of built-in appliances)	-	-	-
18(Endurance)	-	-	-
17(Overload protection of transformers and associated circuits)	-	-	-
16(Leakage current and electric strength)	-	-	-
4(General requirement)	-	-	-
32.1(Radiation Toxicity and Similar Hazards)	-	-	-
31(Resistance to Rusting)	-	-	-
30.2(Needle Flame Test)	-	-	-
30.2(Glow Wire Test)	-	-	-
30.1(Ball pressure test)	-	-	-
29(clearance, creepage distances and solid insulation)	-	-	-
28(Screw test and connections)	-	-	-
27.1(Provision for Earthing, IS 302-1)	-	-	-
26(Terminals for external conductors)	-	-	-
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	-	-
24(Components)	-	-	-
23.1(Internal Wiring, IS 302-1)	-	-	-
22.1(Construction, IS 302-1)	-	-	-
21.1(Mechanical Strength, IS 302-1)	-	-	-
20.1(Stability & Mechanical Hazards, IS 302-1)	-	-	-
19(Abnormal Operation)	-	-	-
18(Endurance)	-	-	-
17(Over Load Protection of Transformers and associated circuits)	-	-	-
16.3(Electric Strength (after clause 15 and 16.2))	-	-	-
16.2(Leakage Current (after Clause 15))	-	-	-
16.1(General)	-	-	-
16.0(General)	-	-	-
15.3(Humidity Test)	-	-	-
15.2(Spillage Test)	-	-	-
15.1(Ingress Protection test other than IPX0 (IP test))	-	-	-
15.0(Moisture resistance)	-	-	-
14(Transient Over Voltages)	-	-	-
13.3(Electric Strength at operating temperature)	-	-	-
13.2(Leakage current at operating temperature)	-	-	-
13(Leakage current and electric strength at operating temperature)	-	-	-
11.3(Heating)	-	-	-
11.2(General)	-	-	-
11.1(General)	-	-	-
10.2(Current input)	-	-	-
10.1(Power input)	-	-	-
9(Starting of motor operation test requirements and tests)	-	-	-
8.1.4(Protection against live parts against protective impedance)	-	-	-
8.1.3(Protection against live parts in visible glowing heating elements)	-	-	-
8.1.2(Protection against live parts in openings)	-	-	-
8.1.1(Protection against live parts in all positions)	-	-	-
7(Marking and instructions)	-	-	-
A.2(Earth continuity test)	-	-	-
Annex C(Ageing test on motors)	-	-	-
Annex D(Thermal motor protectors)	-	-	-
15.2(Moisture resistance)	-	-	-
19.17(Abnormal Operation, IS 302-1)	-	-	-
20.2(Stability & Mechanical Hazards, IS 302-1)	-	-	-
21.2(Mechanical Strength, IS 302-1)	-	-	-
21.3(Mechanical Strength, IS 302-1)	-	-	-
22.5(Construction)	-	-	-
22.6(Construction, IS 302-1)	-	-	-
22.11(Construction, IS 302-1)	-	-	-
22.16(Construction)	-	-	-
22.32(Construction, IS 302-1)	-	-	-
22.42(Construction)	-	-	-
23.3(Internal Wiring, IS 302-1)	-	-	-
25.6(Supply connection and external flexible cords, IS 302-1)	-	-	-
25.7(Supply Connection and External Flexible Cords, IS 302-1)	-	-	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	-	-
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	-	-
26.5(Terminals for external conductors)	-	-	-
27.5(Provision for Earthing, IS 302-1)	-	-	-
28.1(Screws and connections)	-	-	-
22.2(Construction, IS 302-1)	-	-	-
22.3(Construction, IS 302-1)	-	-	-
B.22.4(Construction, IS 302-1)	-	-	-
B.22.5(Construction, IS 302-1)	-	-	-

31 Dec, 2026

-
Included w.e.f 29.05.2025 Exclusion: Cl 19.11.4.1-19.11.4.7(EMI/EMC)

IS 3976 (2018)

Safety Rubber Canvas Boots for Miners Ã¢â‚¬ Specification ( Sixth Revision )

Footwear

70000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.5.2.5 Compact Sole Heel Cl.5.2.5.1 IS 3400 (Part 2)(requirements prescribed in col 3 of Table 2 when tested as per corresponding test methods prescribed in col 4 of Table 2. i)i) Hardness (IRHD)	-	2500	-
Cl.6.3 Tear Strength of Compact Outsole( When outsoles are tested in accordance to 8.2 of IS 15298 (Part 1), the tear strength shall be not less than 8 kN/m for material having density higher than 0.9/cm³ and when density of material is less than or equal to 0.9 g/cm³, tear strength shall not be less than 5 kN/m.)	-	900	-
Cl.5.2.3 Coated Binding Material IS 1954( Coated binding materials shall conform to the requirements given in col 3 of Table 1 when tested according to the methods prescribed in col 4 of Table 1. i)Width in mm, )	-	1200	-
Cl.5.2.1.4 ( Type 2 footwear, the composite upper material shall comply with requirements of water coefficient as prescribed in 5.4.6 of IS 15298 (Part 2).)	-	200	-
Cl.5.13 Energy Absorption Test(When footwear is tested in accordance with the method prescribed in 5.14 of IS 15298 (Part 1), the energy absorption of the seat region shall not be less than 20 J.)	-	1050	-
Cl.5.2.3 Coated Binding Material Annex C(ii) Breaking load in N, Min (50 cm grip length test specimen) )	-	1000	-
Cl.5.2.1.4 ( Type 2 footwear, the composite upper material shall comply with requirements of water vapour permeability as prescribed in 5.4.6 of IS 15298 (Part 2).)	-	200	-
CL.5.2.10 Counter Stiffener( A counter stiffener, made out of textile reinforced withpolymer/rubber including (thermoplastic) having thickness not less than 1.5 mm is to be stitched at inside of upper so as to fortify the back of the footwear at joints of quarter.)	-	1000	-
Cl.5.1.1 Fittings(Fittings of the footwear shall be in conformity to Table 9 of IS 1638 (measurement of men’s lasts) and Table 8 of IS 1638 (measurement of women’s lasts).)	-	200	-
Cl.5.2.1 Upper Cl.5.2.1.1 IS 3400(Part 5)( Composite upper material shall comply with consolidation test as per 5.10.(IS 3400 (Part 5). There shall be no separation at a load of 1.5 kg.))	-	1650	-
Cl.5.2.1.2( Composite upper material shall comply with tear strength as per 5.4.3 of IS 15298 (Part 2).)	-	1650	-
Cl.5.2.1.3 , Cl.6.5 of IS 15298 (Part 1).( Composite upper material shall develop no cracks before 150 000 cycles when tested in accordance with 6.5 of IS 15298 (Part 1).)	-	1650	-
Cl.5.2.1.5( Inner layer of upper shall meet requirement of abrasion resistance as prescribed in 5.5.2 of IS 15298 (Part 2).)	-	2025	-
Cl.5.2.2 Compact Insole/Compact Insocks/Counter Stiffener Lining(Textile material shall be used as lining material for compact insole/compact insocks / counter stiffener. It shall meet the requirement of tear strength as prescribed in 5.6.1 of IS 15298 (Part 2).)	-	200	-
Cl.5.2.2.1 Abrasion resistance of compact insole/insocks/ counter stiffener( When textiles used as lining for all the above are tested in accordance with 6.12 of IS 15298 (Part 1), the lining shall not develop any holes before the following number of cycles has been performed:)	-	2025	-
Cl.5.2.3.1 In case of cotton black binding materia( the same shall be free from sulphur dyes when tested in accordance with Annex B.)	-	1000	-
Cl.5.2.5 Compact Sole Heel Cl. 5.2.5.1 (The compact sole heel shall be made out of polymeric/rubber components and the typical design recommendation (not mandatory) of compact sole heel is as shown in Fig. 3. Sectional view of Type 1/Type 2 ) toe position is given in Fig. 4.)	-	200	-
Cl.5.2.5 Compact Sole Heel 5.2.5.1 IS 3400 (Part 4)(ii)*Change in hardness after accelerated ageing at 100 ± 2 °C for 24 h )	-	2700	-
Cl.5.2.5.3 Ageing for whole footwear(When rubber is used for manufacturing boots or when the outer sole heel is made of bi-polymer, the finished boots shall be aged at 100 ± 2°C for 24 h. On completion of test, all rubber components shall not develop any sign of tackiness or brittleness.)	-	2500	-
Cl.5.2.5.4 Thickness of compact sole hee(Thickness of compact sole heel of the boots shall comply with the thickness and material requirements prescribed in Table 3.)	-	300	-
Cl.5.2.5.4 Thickness of compact sole hee(of black cotton thread, the same shall be free from sulphur dyes when tested in accordance with Annex B.)	-	300	-
Cl.5.2.6 Thread for Upper Closing( The length (m/kg) and construction of sewing thread shall conform to requirements as prescribed in Table 4.)	-	300	-
Cl.5.2.7 Safety Toe Cap(Safety toe cap as per 3.6 shall be fitted into the footwear and must not come out while in use.)	-	200	-
Cl.5.2.8.1( The boots shall be provided with laces having minimum length of 115 cm for Type 1 and minimum 100 cm for Type 2.)	-	300	-
Cl.5.2.8.2 (Minimum breaking load of 60 kg is to be achieved when tested between 18 cm grip length in accordance with Annex C.)	-	1000	-
Cl.5.2.8.3( In case of cotton lace of black colour, the same shall be free from sulphur dyes when tested in accordance with Annex B. Two ends of the laces shall be provided with plastic tips.)	-	1000	-
Cl.5.2.9 Eyelets( Aluminum eyelets of external collar diameter not less than 10 mm and wall thickness of 0.30 to 0.35 mm shall be used.)	-	200	-
Cl.5.3.2 (The tongue shall be made out of composite upper material and shall be half bellow type for Type 2 and full bellow type for Type 1.)	-	200	-
Cl.5.3.5 Outer toe cap( shall be provided which is made of polymer/rubber and it shall be strongly adhered such that it shall not open up or come out while in use. Toe of the boot shall be reinforced with safety toe cap)	-	200	-
Cl.5.3.6( A designed foxing of width of minimum 25 mm and of thickness of minimum 2 mm is to be provided. The foxing shall not extend the edges of the outer sole.)	-	200	-
Cl.5.3.7( Two pairs of detachable insocks are to be provided. The insocks shall be compact in nature having thickness not less than 2 mm.)	-	200	-
Cl.5.4 Finish( In appearance, general workmanship and in all other respects with regard to finish and get up of the footwear, the footwear shall be matching to the approved sample of the purchaser.)	-	200	-
Cl.5.5 Mass(The mass of one pair of finished footwear of size 8 shall not exceed 1 500 g for Type 1 and 1 400 g for Type 2 with an increase or decrease of 100 g for each bigger or smaller size, respectively.)	-	300	-
Cl.5.6( Height of Upper Height of upper of the boots shall conform to column 5 (Design C) and column 4 (Design B) of 5.2.2, Table 4 of IS 15298 (Part 2) for Type 1 and Type 2, respectively when measured as per 6.2 of IS 15298 (Part 1) on the inside of the back of the footwear and from seat of the insole to top edge of the upper.)	-	300	-
Cl.5.7 Performance Test(When safety footwear is tested in accordance with the method described in 5.4 of IS 15298 (Part 1), at an impact energy of (200 ± 4) J, the clearance under the toecap at the moment of impact shall be in accordance with Table 5. In addition, the toecap shall not develop any cracks which go through the material, that is, through which light can be seen.)	-	1050	-
Cl.5.9 Sole Interlayer Bond Strength for Bi-polymer( and Bi-density Sole When tested in accordance with 5.2 of IS 15298 (Part 1), the bond strength between the outer or cleated layer and the adjacent layer shall not be less than 4.0 N/mm unless there is tearing of any part of the sole, in which case the bond strength shall not be less than 3.0 N/mm.)	-	1650	-
Cl.5.10 Consolidation Test( Representative sample of width 25 ± 0.5 mm are cut out from the quarter of the upper along the length of boot. The plies are separated by breaking the bond. Carry out the test on two specimens in accordance with IS 3400 (Part 5). Th)	-	1650	-
Cl.5.11 Compression Resistance( 5.11.1 When safety boots are tested in accordance with 5.5 of IS 15298 (Part 1), the clearance under the toe cap at a compression load of 15 kN ± 0.1 kN shall be in accordance with Table 5.)	-	1050	-
Cl.5.12 Internal Length of Toe Cap( For safety boots, internal length of the toe cap shall meet the specification given in Table 5 of IS 15298 (Part 2) when tested as per 5.3 of IS 15298 (Part 1).)	-	300	-
Cl.6.1 Abrasion Resistance of Compact Outsole( When outsole is tested in accordance with 8.3 of IS 15298 (Part 1), the relative volume loss shall not be greater than 250 mm³ for materials having density 0.9 g/cm³ or less, and not greater than 150 mm³ for materials with density greater than 0.9 g/cm³.)	-	1650	-
Cl.6.2 Flexing Resistance of Compact Outsole( When outsole is tested in accordance with 8.4 of IS 15298 (Part 1), the cut growth shall not be greater than 4 mm before 30 000 cycles.)	-	1650	-
Cl.6.4 Resistance to Hot Contact( — Sole Heel When sole heel is tested in accordance with 8.7 of IS 15298 (Part 1), the material shall not melt/deform and shall not develop any cracks when bent around the mandrel.)	-	1500	-
Cl.6.5 Hydrolysis( When bottom sole or other components are made out of polyurethane, the same shall be tested in accordance with 8.5 of IS 15298 (Part 1) and the same shall comply with 5.8.5 of IS 15298 (Part 2).)	-	3500	-
Cl.5.2.5 Compact Sole Heel Cl.5.2.5.1 IS 3400 (Part 2)(requirements prescribed in col 3 of Table 2 when tested as per corresponding test methods prescribed in col 4 of Table 2. i)i) Hardness (IRHD)	-	200	-
Cl.6.3 Tear Strength of Compact Outsole( When outsoles are tested in accordance to 8.2 of IS 15298 (Part 1), the tear strength shall be not less than 8 kN/m for material having density higher than 0.9/cm³ and when density of material is less than or equal to 0.9 g/cm³, tear strength shall not be less than 5 kN/m.)	-	900	-
Cl.5.2.3 Coated Binding Material IS 1954( Coated binding materials shall conform to the requirements given in col 3 of Table 1 when tested according to the methods prescribed in col 4 of Table 1. i)Width in mm, )	-	1000	-
Cl.5.2.1.4 ( Type 2 footwear, the composite upper material shall comply with requirements of water coefficient as prescribed in 5.4.6 of IS 15298 (Part 2).)	-	200	-
Cl.5.13 Energy Absorption Test(When footwear is tested in accordance with the method prescribed in 5.14 of IS 15298 (Part 1), the energy absorption of the seat region shall not be less than 20 J.)	-	1050	-
Cl.5.2.3 Coated Binding Material Annex C(ii) Breaking load in N, Min (50 cm grip length test specimen) )	-	1000	-
Cl.5.2.1.4 ( Type 2 footwear, the composite upper material shall comply with requirements of water vapour permeability as prescribed in 5.4.6 of IS 15298 (Part 2).)	-	200	-
CL.5.2.10 Counter Stiffener( A counter stiffener, made out of textile reinforced withpolymer/rubber including (thermoplastic) having thickness not less than 1.5 mm is to be stitched at inside of upper so as to fortify the back of the footwear at joints of quarter.)	-	200	-
Cl.5.1.1 Fittings(Fittings of the footwear shall be in conformity to Table 9 of IS 1638 (measurement of men’s lasts) and Table 8 of IS 1638 (measurement of women’s lasts).)	-	200	-
Cl.5.2.1 Upper Cl.5.2.1.1 IS 3400(Part 5)( Composite upper material shall comply with consolidation test as per 5.10.(IS 3400 (Part 5). There shall be no separation at a load of 1.5 kg.))	-	1650	-
Cl.5.2.1.2( Composite upper material shall comply with tear strength as per 5.4.3 of IS 15298 (Part 2).)	-	1650	-
Cl.5.2.1.3 , Cl.6.5 of IS 15298 (Part 1).( Composite upper material shall develop no cracks before 150 000 cycles when tested in accordance with 6.5 of IS 15298 (Part 1).)	-	1650	-
Cl.5.2.1.5( Inner layer of upper shall meet requirement of abrasion resistance as prescribed in 5.5.2 of IS 15298 (Part 2).)	-	2025	-
Cl.5.2.2 Compact Insole/Compact Insocks/Counter Stiffener Lining(Textile material shall be used as lining material for compact insole/compact insocks / counter stiffener. It shall meet the requirement of tear strength as prescribed in 5.6.1 of IS 15298 (Part 2).)	-	200	-
Cl.5.2.2.1 Abrasion resistance of compact insole/insocks/ counter stiffener( When textiles used as lining for all the above are tested in accordance with 6.12 of IS 15298 (Part 1), the lining shall not develop any holes before the following number of cycles has been performed:)	-	2025	-
Cl.5.2.3.1 In case of cotton black binding materia( the same shall be free from sulphur dyes when tested in accordance with Annex B.)	-	1000	-
Cl.5.2.5 Compact Sole Heel Cl. 5.2.5.1 (The compact sole heel shall be made out of polymeric/rubber components and the typical design recommendation (not mandatory) of compact sole heel is as shown in Fig. 3. Sectional view of Type 1/Type 2 ) toe position is given in Fig. 4.)	-	200	-
Cl.5.2.5 Compact Sole Heel 5.2.5.1 IS 3400 (Part 4)(ii)*Change in hardness after accelerated ageing at 100 ± 2 °C for 24 h )	-	2700	-
Cl.5.2.5.3 Ageing for whole footwear(When rubber is used for manufacturing boots or when the outer sole heel is made of bi-polymer, the finished boots shall be aged at 100 ± 2°C for 24 h. On completion of test, all rubber components shall not develop any sign of tackiness or brittleness.)	-	2500	-
Cl.5.2.5.4 Thickness of compact sole hee(Thickness of compact sole heel of the boots shall comply with the thickness and material requirements prescribed in Table 3.)	-	300	-
Cl.5.2.5.4 Thickness of compact sole hee(of black cotton thread, the same shall be free from sulphur dyes when tested in accordance with Annex B.)	-	300	-
Cl.5.2.6 Thread for Upper Closing( The length (m/kg) and construction of sewing thread shall conform to requirements as prescribed in Table 4.)	-	1000	-
Cl.5.2.7 Safety Toe Cap(Safety toe cap as per 3.6 shall be fitted into the footwear and must not come out while in use.)	-	200	-
Cl.5.2.8.1( The boots shall be provided with laces having minimum length of 115 cm for Type 1 and minimum 100 cm for Type 2.)	-	300	-
Cl.5.2.8.2 (Minimum breaking load of 60 kg is to be achieved when tested between 18 cm grip length in accordance with Annex C.)	-	1000	-
Cl.5.2.8.3( In case of cotton lace of black colour, the same shall be free from sulphur dyes when tested in accordance with Annex B. Two ends of the laces shall be provided with plastic tips.)	-	1000	-
Cl.5.2.9 Eyelets( Aluminum eyelets of external collar diameter not less than 10 mm and wall thickness of 0.30 to 0.35 mm shall be used.)	-	200	-
Cl.5.3.2 (The tongue shall be made out of composite upper material and shall be half bellow type for Type 2 and full bellow type for Type 1.)	-	200	-
Cl.5.3.5 Outer toe cap( shall be provided which is made of polymer/rubber and it shall be strongly adhered such that it shall not open up or come out while in use. Toe of the boot shall be reinforced with safety toe cap)	-	200	-
Cl.5.3.6( A designed foxing of width of minimum 25 mm and of thickness of minimum 2 mm is to be provided. The foxing shall not extend the edges of the outer sole.)	-	200	-
Cl.5.3.7( Two pairs of detachable insocks are to be provided. The insocks shall be compact in nature having thickness not less than 2 mm.)	-	200	-
Cl.5.4 Finish( In appearance, general workmanship and in all other respects with regard to finish and get up of the footwear, the footwear shall be matching to the approved sample of the purchaser.)	-	200	-
Cl.5.5 Mass(The mass of one pair of finished footwear of size 8 shall not exceed 1 500 g for Type 1 and 1 400 g for Type 2 with an increase or decrease of 100 g for each bigger or smaller size, respectively.)	-	300	-
Cl.5.6( Height of Upper Height of upper of the boots shall conform to column 5 (Design C) and column 4 (Design B) of 5.2.2, Table 4 of IS 15298 (Part 2) for Type 1 and Type 2, respectively when measured as per 6.2 of IS 15298 (Part 1) on the inside of the back of the footwear and from seat of the insole to top edge of the upper.)	-	300	-
Cl.5.7 Performance Test(When safety footwear is tested in accordance with the method described in 5.4 of IS 15298 (Part 1), at an impact energy of (200 ± 4) J, the clearance under the toecap at the moment of impact shall be in accordance with Table 5. In addition, the toecap shall not develop any cracks which go through the material, that is, through which light can be seen.)	-	1050	-
Cl.5.8 Upper/Outsole Bond Strength(When the footwear is tested in accordance with the method prescribed in 5.2 of IS 15298 (Part 1), the bond strength shall not be less than 4.0 N/mm, unless there is tearing of the sole in which case the bond strength shall not be less than 3.0 N/mm.)	-	1650	-
Cl.5.9 Sole Interlayer Bond Strength for Bi-polymer( and Bi-density Sole When tested in accordance with 5.2 of IS 15298 (Part 1), the bond strength between the outer or cleated layer and the adjacent layer shall not be less than 4.0 N/mm unless there is tearing of any part of the sole, in which case the bond strength shall not be less than 3.0 N/mm.)	-	1650	-
Cl.5.10 Consolidation Test( Representative sample of width 25 ± 0.5 mm are cut out from the quarter of the upper along the length of boot. The plies are separated by breaking the bond. Carry out the test on two specimens in accordance with IS 3400 (Part 5). Th)	-	1650	-
Cl.5.11 Compression Resistance( 5.11.1 When safety boots are tested in accordance with 5.5 of IS 15298 (Part 1), the clearance under the toe cap at a compression load of 15 kN ± 0.1 kN shall be in accordance with Table 5.)	-	1050	-
Cl.5.12 Internal Length of Toe Cap( For safety boots, internal length of the toe cap shall meet the specification given in Table 5 of IS 15298 (Part 2) when tested as per 5.3 of IS 15298 (Part 1).)	-	300	-
Cl.6.1 Abrasion Resistance of Compact Outsole( When outsole is tested in accordance with 8.3 of IS 15298 (Part 1), the relative volume loss shall not be greater than 250 mm³ for materials having density 0.9 g/cm³ or less, and not greater than 150 mm³ for materials with density greater than 0.9 g/cm³.)	-	1650	-
Cl.6.2 Flexing Resistance of Compact Outsole( When outsole is tested in accordance with 8.4 of IS 15298 (Part 1), the cut growth shall not be greater than 4 mm before 30 000 cycles.)	-	1650	-
Cl.6.4 Resistance to Hot Contact( — Sole Heel When sole heel is tested in accordance with 8.7 of IS 15298 (Part 1), the material shall not melt/deform and shall not develop any cracks when bent around the mandrel.)	-	1500	-
Cl.6.5 Hydrolysis( When bottom sole or other components are made out of polyurethane, the same shall be tested in accordance with 8.5 of IS 15298 (Part 1) and the same shall comply with 5.8.5 of IS 15298 (Part 2).)	-	3500	-
Cl.5.2.5 Compact Sole Heel Cl.5.2.5.1 IS 3400 (Part 2)(requirements prescribed in col 3 of Table 2 when tested as per corresponding test methods prescribed in col 4 of Table 2. i)i) Hardness (IRHD)	-	200	-
Cl.6.3 Tear Strength of Compact Outsole( When outsoles are tested in accordance to 8.2 of IS 15298 (Part 1), the tear strength shall be not less than 8 kN/m for material having density higher than 0.9/cm³ and when density of material is less than or equal to 0.9 g/cm³, tear strength shall not be less than 5 kN/m.)	-	900	-
Cl.5.2.3 Coated Binding Material IS 1954( Coated binding materials shall conform to the requirements given in col 3 of Table 1 when tested according to the methods prescribed in col 4 of Table 1. i)Width in mm, )	-	1000	-
Cl.5.2.1.4 ( Type 2 footwear, the composite upper material shall comply with requirements of water coefficient as prescribed in 5.4.6 of IS 15298 (Part 2).)	-	200	-
Cl.5.13 Energy Absorption Test(When footwear is tested in accordance with the method prescribed in 5.14 of IS 15298 (Part 1), the energy absorption of the seat region shall not be less than 20 J.)	-	1050	-
Cl.5.2.3 Coated Binding Material Annex C(ii) Breaking load in N, Min (50 cm grip length test specimen) )	-	1000	-
Cl.5.2.1.4 ( Type 2 footwear, the composite upper material shall comply with requirements of water vapour permeability as prescribed in 5.4.6 of IS 15298 (Part 2).)	-	200	-
CL.5.2.10 Counter Stiffener( A counter stiffener, made out of textile reinforced withpolymer/rubber including (thermoplastic) having thickness not less than 1.5 mm is to be stitched at inside of upper so as to fortify the back of the footwear at joints of quarter.)	-	200	-
Cl.5.1.1 Fittings(Fittings of the footwear shall be in conformity to Table 9 of IS 1638 (measurement of men’s lasts) and Table 8 of IS 1638 (measurement of women’s lasts).)	-	200	-
Cl.5.2.1 Upper Cl.5.2.1.1 IS 3400(Part 5)( Composite upper material shall comply with consolidation test as per 5.10.(IS 3400 (Part 5). There shall be no separation at a load of 1.5 kg.))	-	1650	-
Cl.5.2.1.2( Composite upper material shall comply with tear strength as per 5.4.3 of IS 15298 (Part 2).)	-	1650	-
Cl.5.2.1.3 , Cl.6.5 of IS 15298 (Part 1).( Composite upper material shall develop no cracks before 150 000 cycles when tested in accordance with 6.5 of IS 15298 (Part 1).)	-	1650	-
Cl.5.2.1.5( Inner layer of upper shall meet requirement of abrasion resistance as prescribed in 5.5.2 of IS 15298 (Part 2).)	-	2025	-
Cl.5.2.2 Compact Insole/Compact Insocks/Counter Stiffener Lining(Textile material shall be used as lining material for compact insole/compact insocks / counter stiffener. It shall meet the requirement of tear strength as prescribed in 5.6.1 of IS 15298 (Part 2).)	-	200	-
Cl.5.2.2.1 Abrasion resistance of compact insole/insocks/ counter stiffener( When textiles used as lining for all the above are tested in accordance with 6.12 of IS 15298 (Part 1), the lining shall not develop any holes before the following number of cycles has been performed:)	-	2025	-
Cl.5.2.3.1 In case of cotton black binding materia( the same shall be free from sulphur dyes when tested in accordance with Annex B.)	-	1000	-
Cl.5.2.5 Compact Sole Heel Cl. 5.2.5.1 (The compact sole heel shall be made out of polymeric/rubber components and the typical design recommendation (not mandatory) of compact sole heel is as shown in Fig. 3. Sectional view of Type 1/Type 2 ) toe position is given in Fig. 4.)	-	200	-
Cl.5.2.5 Compact Sole Heel 5.2.5.1 IS 3400 (Part 4)(ii)*Change in hardness after accelerated ageing at 100 ± 2 °C for 24 h )	-	2700	-
Cl.5.2.5.3 Ageing for whole footwear(When rubber is used for manufacturing boots or when the outer sole heel is made of bi-polymer, the finished boots shall be aged at 100 ± 2°C for 24 h. On completion of test, all rubber components shall not develop any sign of tackiness or brittleness.)	-	2500	-
Cl.5.2.5.4 Thickness of compact sole hee(Thickness of compact sole heel of the boots shall comply with the thickness and material requirements prescribed in Table 3.)	-	300	-
Cl.5.2.5.4 Thickness of compact sole hee(of black cotton thread, the same shall be free from sulphur dyes when tested in accordance with Annex B.)	-	300	-
Cl.5.2.6 Thread for Upper Closing( The length (m/kg) and construction of sewing thread shall conform to requirements as prescribed in Table 4.)	-	1000	-
Cl.5.2.7 Safety Toe Cap(Safety toe cap as per 3.6 shall be fitted into the footwear and must not come out while in use.)	-	200	-
Cl.5.2.8.1( The boots shall be provided with laces having minimum length of 115 cm for Type 1 and minimum 100 cm for Type 2.)	-	200	-
Cl.5.2.8.2 (Minimum breaking load of 60 kg is to be achieved when tested between 18 cm grip length in accordance with Annex C.)	-	1000	-
Cl.5.2.8.3( In case of cotton lace of black colour, the same shall be free from sulphur dyes when tested in accordance with Annex B. Two ends of the laces shall be provided with plastic tips.)	-	200	-
Cl.5.2.9 Eyelets( Aluminum eyelets of external collar diameter not less than 10 mm and wall thickness of 0.30 to 0.35 mm shall be used.)	-	200	-
Cl.5.3.2 (The tongue shall be made out of composite upper material and shall be half bellow type for Type 2 and full bellow type for Type 1.)	-	0	-
Cl.5.3.5 Outer toe cap( shall be provided which is made of polymer/rubber and it shall be strongly adhered such that it shall not open up or come out while in use. Toe of the boot shall be reinforced with safety toe cap)	-	0	-
Cl.5.3.6( A designed foxing of width of minimum 25 mm and of thickness of minimum 2 mm is to be provided. The foxing shall not extend the edges of the outer sole.)	-	200	-
Cl.5.3.7( Two pairs of detachable insocks are to be provided. The insocks shall be compact in nature having thickness not less than 2 mm.)	-	200	-
Cl.5.4 Finish( In appearance, general workmanship and in all other respects with regard to finish and get up of the footwear, the footwear shall be matching to the approved sample of the purchaser.)	-	200	-
Cl.5.5 Mass(The mass of one pair of finished footwear of size 8 shall not exceed 1 500 g for Type 1 and 1 400 g for Type 2 with an increase or decrease of 100 g for each bigger or smaller size, respectively.)	-	300	-
Cl.5.6( Height of Upper Height of upper of the boots shall conform to column 5 (Design C) and column 4 (Design B) of 5.2.2, Table 4 of IS 15298 (Part 2) for Type 1 and Type 2, respectively when measured as per 6.2 of IS 15298 (Part 1) on the inside of the back of the footwear and from seat of the insole to top edge of the upper.)	-	300	-
Cl.5.7 Performance Test(When safety footwear is tested in accordance with the method described in 5.4 of IS 15298 (Part 1), at an impact energy of (200 ± 4) J, the clearance under the toecap at the moment of impact shall be in accordance with Table 5. In addition, the toecap shall not develop any cracks which go through the material, that is, through which light can be seen.)	-	1050	-
Cl.5.8 Upper/Outsole Bond Strength(When the footwear is tested in accordance with the method prescribed in 5.2 of IS 15298 (Part 1), the bond strength shall not be less than 4.0 N/mm, unless there is tearing of the sole in which case the bond strength shall not be less than 3.0 N/mm.)	-	1650	-
Cl.5.9 Sole Interlayer Bond Strength for Bi-polymer( and Bi-density Sole When tested in accordance with 5.2 of IS 15298 (Part 1), the bond strength between the outer or cleated layer and the adjacent layer shall not be less than 4.0 N/mm unless there is tearing of any part of the sole, in which case the bond strength shall not be less than 3.0 N/mm.)	-	1650	-
Cl.5.10 Consolidation Test( Representative sample of width 25 ± 0.5 mm are cut out from the quarter of the upper along the length of boot. The plies are separated by breaking the bond. Carry out the test on two specimens in accordance with IS 3400 (Part 5). Th)	-	1650	-
Cl.5.11 Compression Resistance( 5.11.1 When safety boots are tested in accordance with 5.5 of IS 15298 (Part 1), the clearance under the toe cap at a compression load of 15 kN ± 0.1 kN shall be in accordance with Table 5.)	-	1050	-
Cl.5.12 Internal Length of Toe Cap( For safety boots, internal length of the toe cap shall meet the specification given in Table 5 of IS 15298 (Part 2) when tested as per 5.3 of IS 15298 (Part 1).)	-	300	-
Cl.6.1 Abrasion Resistance of Compact Outsole( When outsole is tested in accordance with 8.3 of IS 15298 (Part 1), the relative volume loss shall not be greater than 250 mm³ for materials having density 0.9 g/cm³ or less, and not greater than 150 mm³ for materials with density greater than 0.9 g/cm³.)	-	1650	-
Cl.6.2 Flexing Resistance of Compact Outsole( When outsole is tested in accordance with 8.4 of IS 15298 (Part 1), the cut growth shall not be greater than 4 mm before 30 000 cycles.)	-	1650	-
Cl.6.4 Resistance to Hot Contact( — Sole Heel When sole heel is tested in accordance with 8.7 of IS 15298 (Part 1), the material shall not melt/deform and shall not develop any cracks when bent around the mandrel.)	-	1500	-
Cl.6.5 Hydrolysis( When bottom sole or other components are made out of polyurethane, the same shall be tested in accordance with 8.5 of IS 15298 (Part 1) and the same shall comply with 5.8.5 of IS 15298 (Part 2).)	-	3500	-
4(Types)	-	200	-
5(Requirements)	-	200	-
5.1(Design)	-	200	-
5.10(consolidation test IS 3400 (Part 5))	-	1650	-
5.2.4(Reinforcing Material)	-	200	-
5.2.8.4(Colour of the lace)	-	200	-
5.3, 5.3.1,5.3.3,5.3.4(Construction)	-	200	-
5.10(Consolidation Test IS 3400 (Part 5) : 1986)	-	1650	-
8(CHEMICAL REQUIREMENTS)	-	45000	-
9, 9.1(BIS CERTIFICATION MARKING)	-	0	-
10(Marking)	-	300	-
11(Packing)	-	0	-
Cl. 5.2.4(Reinforcing Material)	-	300	-
Cl. 5.2.8.4(Colour of the lace)	-	300	-
11(PACKING)	-	0	-
Cl. 5.3(Construction 5.3.1,5.3.3,5.3.4)	-	300	-
10(Marking)	-	300	-
7.1(Resistance to fuel)	-	1500	-
9, 9.1(BIS CERTIFICATION MARKING)	-	0	-
Cl. 8 (IS 17011, Table-1 (i))(Allergenic and carcinogenic disperse dyes)	-	45000	-
Cl.5.8 Upper/Outsole Bond Strength(When the footwear is tested in accordance with the method prescribed in 5.2 of IS 15298 (Part 1), the bond strength shall not be less than 4.0 N/mm, unless there is tearing of the sole in which case the bond strength shall not be less than 3.0 N/mm.)	-	1650	-

31 Dec, 2026

-
Included w.e.f 17.06.2025 For all types of boots other than boots with resistance to electricity.

IS 3736 (1995)

Canvas boots, rubber sole - Specification (Second Revision)

Footwear

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.4.1.7.4 Ageing(The boots shall be also aged at 70 ± 1°C for 168 h, on completion of which the test pieces taken from the soles and heels of the boots shall conform to the physical requirements prescribed in Table 5. i) Tensile Length)	-	2500	-
Cl.4.1.7.4 Ageing(ii) Elongation at break)	-	2700	-
Cl.4.1.7.2 IS 3400 (Part 2) : 1980(2)Hardness, IRHD)	-	650	-
4.1.6 Fabric Laces Cl.4.1.6.1( The boots shall be provided with braided of cotton or man made or blended fabric laces 115 ± 5 cm in length, matching the colour of the upper. )	-	1200	-
Cl.4.1.1 upper IS 1969(d) Picks/dm)	-	300	-
Cl.4.4.5 ( Table 1.)(d) Picks/dm)	-	300	-
4.1.2 Lining Material(195 ± 5 picks/dm shall be used.)	-	300	-
Cl.4.1.1 upper IS 1969(c) Ends/dm )	-	300	-
Cl.4.4.5 ( Table 1.)(c) Ends/dm )	-	300	-
4.1.2 Lining Material(having 390 ± 10 ends/dm and )	-	300	-
Cl.4.1.7.2 IS 3400 (Part 4) : 1987 IS 3400 (Part 2) : 1980(Change in initial hardness after accelerated ageing for 24 h at l00 ± 1°C)	-	2500	-
Cl.4.8 Adhesion Test(From the upper foxing portion where it is adhered to the canvas cut a strip of 8.0 ± 0.5 mm width along with the length of the sole at the waist portion and of sufficient lengh to permit separation over a length of at least 75 mm. Carry out the test on two test pieces (one from each odd) at the rate of traverse of 100 ± 10 mm per minute in accordance with IS 3400 (Part 5):1986 or the Static Dead Load Method as given in Annex C. The individual adhesion value noted/recorded shall not be less than 8 N (0.8 kgf) for each of the test pieces ( see Note under 4.7 ).')	-	1650	-
Cl.4.4.9(From the upper of made up footwear representative sample of width 25 ± 0.5 mm width strip is to be cut along the length of the boot of enough length so as to make it convenient to allow a distance of minimum 30 mm between the jaws of the tensile machine)	-	200	-
Cl.4.1.7.2 IS 3400 (Part 1) : 1987(Tensile strength in MPa, Min)	-	700	-
Cl.4.1.3 Binding Material IS 1954:1990(Cotton tape NEWAR used as binding material shall conform to the requirements as mentioned in Table 2, when tested in accordance with the methods referred to in col 4 of Table 2. 1)Width, mm. Min )	-	1200	-
Cl.4.4.3(The top, side and front edges of the quarters and tongue shall be bound with cotton tape NEWAR of not less than 13 mm width using variety No. 29 thread.)	-	200	-
Cl.4.1.7.3 IS 3400 (Part 10) : 1977(Compression set, in percent. Max)	-	1500	-
IS 1969:1985(Breaking load on 50 cm test length. N, Min)	-	1000	-
4.1.6 Fabric Laces Cl.4.1.6.1(The laces shall have a minimum breaking load of 450 N, when tested between 18 cm grips, the rate of traverse of power actuated grip being 30 cm/min.)	-	1300	-
Cl.4.1.7.2 IS 3400 (Part 16) : 1974(iii)Flexing resistance, number of cycles b)Cut growth at the end of 150 000 cycles, Percent, Max)	-	1650	-
Cl.4.4.4( The back of the quarter shall be reinforced with a strip, not less than 25 mm wide,of either upper material or canvas. In case of composite upper material the edges of the strip shall be bound by cotton tape ( NEWAR ). When canvas cloth is used the edges shall be folded and shall be stitched with two rows of stitching.)	-	200	-
Cl.4.7 Consolidation Test(From the quarter, cut a strip of 25.0 ± 0. 5 mm width along the length of the boot and of sufficient length to permit separation over a length of 75 mm. Carry out the test on two test pieces (one from each odd) at the rate of traverse of 100 ± 10mm per minute in accordance with IS 3400 (Part 5): 1986 or Static Dead Load Method as given in Annex C. The individual adhesion value for consolidation test shall not be less than 30 N (3.0 kgf) for each of the test pieces)	-	1650	-
Cl.4.1.7.2 IS 3400 (Part 1) : 1987(Elongation at break, in percent, Min)	-	900	-
Cl.4.4.5 ( Table 1.)(b) Weft )	-	200	-
Cl.4.4.5 ( Table 1.)( in case of half bellow. Thefull bellow tongue shall be made out of canvas cloth as prescribed in Sl No. (i) of Table 1. Breaking load in N, Min a) Warp )	-	200	-
Cl.4.1.1 upper IS 1969(b)Weft)	-	1300	-
Cl.4.1.1 upper IS 1969(Breaking load in N.Min (5 × 20 cm grip): a) Wrap)	-	1000	-
Cl.4.1.7.2 IS 3400 (Part 16) : 1974(iii)Flexing resistance, number of cycles a)Initial crack, Min)	-	1650	-
4.1.2 Lining Material( 200 N Minin weft way (when tested in accordance with IS 1969 : 1985) )	-	1000	-
4.1.2 Lining Material(For covering of the insole, cotton drill conforming to Table 1, Sl No. (ii) shall be used. For detachable insole, bleached cotton twill of breaking load 390 N Min in warp way and)	-	200	-
Cl.4.1.1 upper(The upper shall consist of Rip Stop Fabric of cotton or manmade or its blend being the over layer and cotton drill as an inner layer and shall conform to the requirements given at Sl No. (i) of Table 1. Sr.no 1.Overlayer Construction )	-	200	-
4.1.1.1 Colour fastness(The dyed fabrics prescribed in 4.1.1 shall be fast to daylight and mechanical washing. Fastness to daylight shall be of rating 4 or better, when tested in accordance with IS 686 : 1985 or IS 2454 : 1985.)	-	1500	-
Cl.4.1.1.2( Fastness to mechanical washing (mild) shall be of rating 4 or better, when tested in accordance with IS 764 : 1979)	-	1500	-
Cl.4.1.3.3( Black tapes shall be free from sulphur dyes when tested in accordance with Annex B.)	-	1000	-
Cl.4.1.4 Reinforcement Material(The back seam, joining two quarters at the back of the heel shall be reinforced with a not less than 25 mm wide tape made out of material conforming to Sl No. (i) of Table 1)	-	200	-
Cl.4.1.5 Thread for Upper Closing Cl.4.1.5.1 (IS 1670:1991)(Sewing thread cotton, man made or blended shall be used for stitching of upper. For cotton variety thread shall conform to variety No. 28 of IS 1720. Polyester variety thread shall conform to variety No. 9 of IS 9543. Any other blend of thread would have breaking load not less than above referred requirements. Sewing thread cotton, manmade or blended shall be used for binding of upper. For cotton variety thread shall conform to variety No. 32 of IS 1720. Polyester variety thread shall conform to variety No. 5 of IS 9543. Any other blend of thread would have breaking load not less than above referred requirement of specification.')	-	1200	-
Cl.4.1.5.2( The colour of the threads shall be asagreed to between the purchaser and the supplier. The dyed threads shall conform to the following requirements)	-	3500	-
4.1.6 Fabric Laces Cl.4.1.6.1(The two ends of the lace shall be provided with suitable metal or plastic tips. Black laces shall be free from sulphur dyes when tested in accordance with Annex B.)	-	1300	-
Cl.4.1.7 Rubber Components Cl.4.1.7.1( the soles and heels shall conform to Type 2 of IS 5676:1995.)	-	200	-
Cl.4.1.7.2 IS 3400 (Part 9) : 1978( The rubber components shall conform to Table 4 when tested.' ( Page 3, Table 4, Note 1) — 'However in case it is not possible then 4.2.5.3 of IS 13695:1993 shall be followed. 1)Relative density, Max)	-	7800	-
Cl.4.1.7.5 Thickness of components(Individual components of the boots shall comply with the thickness and material requirements prescribed in Table 6.)	-	300	-
Cl.4.3 Leg Height(The leg height of the boots for size 8 shall be 160 ± 2 mm with an increase or decrease of 4 mm of the nominal height for each bigger or smaller sizes respectively when measured at the inside from the back of the boot from insole to the top.)	-	300	-
Cl.4.4.2( The canvas upper shall be lined with bleached drill cloth.)	-	200	-
Cl.4.4.3( The upper shall be stitched on a lockstitch machine, with 30 to 40 stitches per decimetre by thread of variety No. 8 and variety No. 29 cotton sewing thread conforming to 4.1.5 using variety No. 29 for taping and binding and variety No. 8 for remaining seams. )	-	200	-
Cl.4.4.5 ( The tongue shall be either half or full bellow depending on the requirement of the purchaser andshall be made from composite material prescribed for the upper in 4.1.1.)	-	200	-
Cl.4.4.6( A minimum of seven aluminium, brass or steel eyelets having 10 mm diameter and wall thickness 0.30 to 0.35 mm shall be fitted in each face.')	-	200	-
Cl.4.4.7( The toe shall be reinforced with a toe puff cemented inside and outside with rubber toe cap. The heel piece (counter) or stiffener shall be set from the bottom of the lining and bound flat on the top edge with white cloth for binding of countertop edge with white clothfor binding of counter)	-	200	-
Cl.4.4.8( A strengthening rubber arch piece shall be firmly pasted and stitched at the middle arch of the inside quarter. Another strengthening rubber piece, circular in shape 35 ± 1 mm in diameter, may bepasted and stitched at the centre of the inside)	-	200	-
Cl.4.4.10( A 25 mm Min wide and 2 mm Min thick rubber golosh in serrated, diamond or any otherdesign, as agreed to between the purchaser and thesupplier, shall be fitted all round the sole edge of the boot. The golosh shall not extend below the edge of the sole.)	-	200	-
Cl.4.5.1(Cl.4.1.6.)( Each pair of boot shall be provided with a pair of braided fabric laces of the quality as prescribed in 4.1.6.)	-	200	-
Cl.4.5.2( In appearance, general workmanship, finish and in all other respects, not defined in this standard, the boot shall be similar to those of the sample approved by the purchaser, if any.)	-	200	-
Cl.4.6 Mass(The mass of finished boots, rubber sole, of size 8 shall not exceed 1130 g per pair, and the mass shall increase or decrease by 75 g per pair for each bigger or smaller size respectively.)	-	300	-
Cl.4.9 Composite Breaking Strength Test( From the upper of made up footwear representative sample of width 25 ± 0.5 mm width strip is to be cut along the length of the boot of enough length so as to make it convenient to allow a distance of minimum 30 mm between the jaws of the tensile machine.Rate of traverse of pulling jaw shall be 100 ± 5 mm per minute. Two such test pieces will be required to be obtained from the made up footwear and will be subjected to test to break each test piece. Mean value of each set of test pieces comprising of length wise and height wise test pieces will be 1 000 N/25 mm width minimum.')	-	1650	-
Cl.4.1.7.4 Ageing(The boots shall be also aged at 70 ± 1°C for 168 h, on completion of which the test pieces taken from the soles and heels of the boots shall conform to the physical requirements prescribed in Table 5. i) Tensile Length)	-	2500	-
Cl.4.1.7.4 Ageing(ii) Elongation at break)	-	2700	-
Cl.4.1.7.2 IS 3400 (Part 2) : 1980(2)Hardness, IRHD)	-	650	-
4.1.6 Fabric Laces Cl.4.1.6.1( The boots shall be provided with braided of cotton or man made or blended fabric laces 115 ± 5 cm in length, matching the colour of the upper. )	-	1200	-
Cl.4.1.1 upper IS 1969(d) Picks/dm)	-	300	-
Cl.4.4.5 ( Table 1.)(d) Picks/dm)	-	300	-
4.1.2 Lining Material(195 ± 5 picks/dm shall be used.)	-	300	-
Cl.4.1.1 upper IS 1969(c) Ends/dm )	-	300	-
Cl.4.4.5 ( Table 1.)(c) Ends/dm )	-	300	-
4.1.2 Lining Material(having 390 ± 10 ends/dm and )	-	300	-
Cl.4.1.7.2 IS 3400 (Part 4) : 1987 IS 3400 (Part 2) : 1980(Change in initial hardness after accelerated ageing for 24 h at l00 ± 1°C)	-	2500	-
Cl.4.8 Adhesion Test(From the upper foxing portion where it is adhered to the canvas cut a strip of 8.0 ± 0.5 mm width along with the length of the sole at the waist portion and of sufficient lengh to permit separation over a length of at least 75 mm. Carry out the test on two test pieces (one from each odd) at the rate of traverse of 100 ± 10 mm per minute in accordance with IS 3400 (Part 5):1986 or the Static Dead Load Method as given in Annex C. The individual adhesion value noted/recorded shall not be less than 8 N (0.8 kgf) for each of the test pieces ( see Note under 4.7 ).')	-	1650	-
Cl.4.4.9(From the upper of made up footwear representative sample of width 25 ± 0.5 mm width strip is to be cut along the length of the boot of enough length so as to make it convenient to allow a distance of minimum 30 mm between the jaws of the tensile machine)	-	200	-
Cl.4.1.7.2 IS 3400 (Part 1) : 1987(Tensile strength in MPa, Min)	-	900	-
Cl.4.1.3 Binding Material IS 1954:1990(Cotton tape NEWAR used as binding material shall conform to the requirements as mentioned in Table 2, when tested in accordance with the methods referred to in col 4 of Table 2. 1)Width, mm. Min )	-	1300	-
Cl.4.4.3(The top, side and front edges of the quarters and tongue shall be bound with cotton tape NEWAR of not less than 13 mm width using variety No. 29 thread.)	-	200	-
Cl.4.1.7.3 IS 3400 (Part 10) : 1977(Compression set, in percent. Max)	-	1500	-
Cl.4.4.4( The back of the quarter shall be reinforced with a strip, not less than 25 mm wide,of either upper material or canvas. In case of composite upper material the edges of the strip shall be bound by cotton tape ( NEWAR ). When canvas cloth is used the edges shall be folded and shall be stitched with two rows of stitching.)	-	200	-
Cl.4.7 Consolidation Test(From the quarter, cut a strip of 25.0 ± 0. 5 mm width along the length of the boot and of sufficient length to permit separation over a length of 75 mm. Carry out the test on two test pieces (one from each odd) at the rate of traverse of 100 ± 10mm per minute in accordance with IS 3400 (Part 5): 1986 or Static Dead Load Method as given in Annex C. The individual adhesion value for consolidation test shall not be less than 30 N (3.0 kgf) for each of the test pieces)	-	1650	-
Cl.4.1.7.2 IS 3400 (Part 1) : 1987(Elongation at break, in percent, Min)	-	900	-
IS 1969:1985(Breaking load on 50 cm test length. N, Min)	-	1000	-
4.1.6 Fabric Laces Cl.4.1.6.1(The laces shall have a minimum breaking load of 450 N, when tested between 18 cm grips, the rate of traverse of power actuated grip being 30 cm/min.)	-	1300	-
Cl.4.1.7.2 IS 3400 (Part 16) : 1974(iii)Flexing resistance, number of cycles b)Cut growth at the end of 150 000 cycles, Percent, Max)	-	1650	-
Cl.4.4.5 ( Table 1.)(b) Weft )	-	200	-
Cl.4.4.5 ( Table 1.)( in case of half bellow. Thefull bellow tongue shall be made out of canvas cloth as prescribed in Sl No. (i) of Table 1. Breaking load in N, Min a) Warp )	-	200	-
Cl.4.1.1 upper IS 1969(b)Weft)	-	200	-
Cl.4.1.1 upper IS 1969(Breaking load in N.Min (5 × 20 cm grip): a) Wrap)	-	1000	-
Cl.4.1.7.2 IS 3400 (Part 16) : 1974(iii)Flexing resistance, number of cycles a)Initial crack, Min)	-	1650	-
4.1.2 Lining Material( 200 N Minin weft way (when tested in accordance with IS 1969 : 1985) )	-	1000	-
4.1.2 Lining Material(For covering of the insole, cotton drill conforming to Table 1, Sl No. (ii) shall be used. For detachable insole, bleached cotton twill of breaking load 390 N Min in warp way and)	-	200	-
Cl.4.1.1 upper(The upper shall consist of Rip Stop Fabric of cotton or manmade or its blend being the over layer and cotton drill as an inner layer and shall conform to the requirements given at Sl No. (i) of Table 1. Sr.no 1.Overlayer Construction )	-	200	-
4.1.1.1 Colour fastness(The dyed fabrics prescribed in 4.1.1 shall be fast to daylight and mechanical washing. Fastness to daylight shall be of rating 4 or better, when tested in accordance with IS 686 : 1985 or IS 2454 : 1985.)	-	1500	-
Cl.4.1.1.2( Fastness to mechanical washing (mild) shall be of rating 4 or better, when tested in accordance with IS 764 : 1979)	-	1500	-
Cl.4.1.3.3( Black tapes shall be free from sulphur dyes when tested in accordance with Annex B.)	-	1000	-
Cl.4.1.4 Reinforcement Material(The back seam, joining two quarters at the back of the heel shall be reinforced with a not less than 25 mm wide tape made out of material conforming to Sl No. (i) of Table 1)	-	200	-
Cl.4.1.5 Thread for Upper Closing Cl.4.1.5.1 (IS 1670:1991)(Sewing thread cotton, man made or blended shall be used for stitching of upper. For cotton variety thread shall conform to variety No. 28 of IS 1720. Polyester variety thread shall conform to variety No. 9 of IS 9543. Any other blend of thread would have breaking load not less than above referred requirements. Sewing thread cotton, manmade or blended shall be used for binding of upper. For cotton variety thread shall conform to variety No. 32 of IS 1720. Polyester variety thread shall conform to variety No. 5 of IS 9543. Any other blend of thread would have breaking load not less than above referred requirement of specification.')	-	1300	-
Cl.4.1.5.2( The colour of the threads shall be asagreed to between the purchaser and the supplier. The dyed threads shall conform to the following requirements)	-	200	-
4.1.6 Fabric Laces Cl.4.1.6.1(The two ends of the lace shall be provided with suitable metal or plastic tips. Black laces shall be free from sulphur dyes when tested in accordance with Annex B.)	-	1300	-
Cl.4.1.7 Rubber Components Cl.4.1.7.1( the soles and heels shall conform to Type 2 of IS 5676:1995.)	-	200	-
Cl.4.1.7.2 IS 3400 (Part 9) : 1978( The rubber components shall conform to Table 4 when tested.' ( Page 3, Table 4, Note 1) — 'However in case it is not possible then 4.2.5.3 of IS 13695:1993 shall be followed. 1)Relative density, Max)	-	7800	-
Cl.4.1.7.5 Thickness of components(Individual components of the boots shall comply with the thickness and material requirements prescribed in Table 6.)	-	300	-
Cl.4.3 Leg Height(The leg height of the boots for size 8 shall be 160 ± 2 mm with an increase or decrease of 4 mm of the nominal height for each bigger or smaller sizes respectively when measured at the inside from the back of the boot from insole to the top.)	-	300	-
Cl.4.4.2( The canvas upper shall be lined with bleached drill cloth.)	-	200	-
Cl.4.4.3( The upper shall be stitched on a lockstitch machine, with 30 to 40 stitches per decimetre by thread of variety No. 8 and variety No. 29 cotton sewing thread conforming to 4.1.5 using variety No. 29 for taping and binding and variety No. 8 for remaining seams. )	-	200	-
Cl.4.4.5 ( The tongue shall be either half or full bellow depending on the requirement of the purchaser andshall be made from composite material prescribed for the upper in 4.1.1.)	-	200	-
Cl.4.4.6( A minimum of seven aluminium, brass or steel eyelets having 10 mm diameter and wall thickness 0.30 to 0.35 mm shall be fitted in each face.')	-	200	-
Cl.4.4.7( The toe shall be reinforced with a toe puff cemented inside and outside with rubber toe cap. The heel piece (counter) or stiffener shall be set from the bottom of the lining and bound flat on the top edge with white cloth for binding of countertop edge with white clothfor binding of counter)	-	200	-
Cl.4.4.8( A strengthening rubber arch piece shall be firmly pasted and stitched at the middle arch of the inside quarter. Another strengthening rubber piece, circular in shape 35 ± 1 mm in diameter, may bepasted and stitched at the centre of the inside)	-	200	-
Cl.4.4.10( A 25 mm Min wide and 2 mm Min thick rubber golosh in serrated, diamond or any otherdesign, as agreed to between the purchaser and thesupplier, shall be fitted all round the sole edge of the boot. The golosh shall not extend below the edge of the sole.)	-	200	-
Cl.4.5.1(Cl.4.1.6.)( Each pair of boot shall be provided with a pair of braided fabric laces of the quality as prescribed in 4.1.6.)	-	200	-
Cl.4.5.2( In appearance, general workmanship, finish and in all other respects, not defined in this standard, the boot shall be similar to those of the sample approved by the purchaser, if any.)	-	200	-
Cl.4.6 Mass(The mass of finished boots, rubber sole, of size 8 shall not exceed 1130 g per pair, and the mass shall increase or decrease by 75 g per pair for each bigger or smaller size respectively.)	-	300	-
Cl.4.9 Composite Breaking Strength Test( From the upper of made up footwear representative sample of width 25 ± 0.5 mm width strip is to be cut along the length of the boot of enough length so as to make it convenient to allow a distance of minimum 30 mm between the jaws of the tensile machine.Rate of traverse of pulling jaw shall be 100 ± 5 mm per minute. Two such test pieces will be required to be obtained from the made up footwear and will be subjected to test to break each test piece. Mean value of each set of test pieces comprising of length wise and height wise test pieces will be 1 000 N/25 mm width minimum.')	-	1650	-
Cl.4.1.7.4 Ageing(The boots shall be also aged at 70 ± 1°C for 168 h, on completion of which the test pieces taken from the soles and heels of the boots shall conform to the physical requirements prescribed in Table 5. i) Tensile Length)	-	2500	-
Cl.4.1.7.4 Ageing(ii) Elongation at break)	-	2700	-
Cl.4.1.7.2 IS 3400 (Part 2) : 1980(2)Hardness, IRHD)	-	650	-
4.1.6 Fabric Laces Cl.4.1.6.1( The boots shall be provided with braided of cotton or man made or blended fabric laces 115 ± 5 cm in length, matching the colour of the upper. )	-	200	-
Cl.4.1.1 upper IS 1969(d) Picks/dm)	-	300	-
Cl.4.4.5 ( Table 1.)(d) Picks/dm)	-	300	-
4.1.2 Lining Material(195 ± 5 picks/dm shall be used.)	-	300	-
Cl.4.1.1 upper IS 1969(c) Ends/dm )	-	300	-
Cl.4.4.5 ( Table 1.)(c) Ends/dm )	-	300	-
4.1.2 Lining Material(having 390 ± 10 ends/dm and )	-	300	-
Cl.4.1.7.2 IS 3400 (Part 4) : 1987 IS 3400 (Part 2) : 1980(Change in initial hardness after accelerated ageing for 24 h at l00 ± 1°C)	-	2500	-
Cl.4.8 Adhesion Test(From the upper foxing portion where it is adhered to the canvas cut a strip of 8.0 ± 0.5 mm width along with the length of the sole at the waist portion and of sufficient lengh to permit separation over a length of at least 75 mm. Carry out the test on two test pieces (one from each odd) at the rate of traverse of 100 ± 10 mm per minute in accordance with IS 3400 (Part 5):1986 or the Static Dead Load Method as given in Annex C. The individual adhesion value noted/recorded shall not be less than 8 N (0.8 kgf) for each of the test pieces ( see Note under 4.7 ).')	-	1650	-
Cl.4.4.9(From the upper of made up footwear representative sample of width 25 ± 0.5 mm width strip is to be cut along the length of the boot of enough length so as to make it convenient to allow a distance of minimum 30 mm between the jaws of the tensile machine)	-	200	-
Cl.4.1.7.2 IS 3400 (Part 1) : 1987(Tensile strength in MPa, Min)	-	900	-
Cl.4.1.3 Binding Material IS 1954:1990(Cotton tape NEWAR used as binding material shall conform to the requirements as mentioned in Table 2, when tested in accordance with the methods referred to in col 4 of Table 2. 1)Width, mm. Min )	-	1300	-
Cl.4.4.3(The top, side and front edges of the quarters and tongue shall be bound with cotton tape NEWAR of not less than 13 mm width using variety No. 29 thread.)	-	200	-
Cl.4.1.7.3 IS 3400 (Part 10) : 1977(Compression set, in percent. Max)	-	1650	-
Cl.4.4.4( The back of the quarter shall be reinforced with a strip, not less than 25 mm wide,of either upper material or canvas. In case of composite upper material the edges of the strip shall be bound by cotton tape ( NEWAR ). When canvas cloth is used the edges shall be folded and shall be stitched with two rows of stitching.)	-	200	-
Cl.4.7 Consolidation Test(From the quarter, cut a strip of 25.0 ± 0. 5 mm width along the length of the boot and of sufficient length to permit separation over a length of 75 mm. Carry out the test on two test pieces (one from each odd) at the rate of traverse of 100 ± 10mm per minute in accordance with IS 3400 (Part 5): 1986 or Static Dead Load Method as given in Annex C. The individual adhesion value for consolidation test shall not be less than 30 N (3.0 kgf) for each of the test pieces)	-	1650	-
Cl.4.1.7.2 IS 3400 (Part 1) : 1987(Elongation at break, in percent, Min)	-	900	-
4.1.6 Fabric Laces Cl.4.1.6.1(The laces shall have a minimum breaking load of 450 N, when tested between 18 cm grips, the rate of traverse of power actuated grip being 30 cm/min.)	-	1300	-
Cl.4.1.7.2 IS 3400 (Part 16) : 1974(iii)Flexing resistance, number of cycles b)Cut growth at the end of 150 000 cycles, Percent, Max)	-	1650	-
Cl.4.4.5 ( Table 1.)(b) Weft )	-	200	-
Cl.4.4.5 ( Table 1.)( in case of half bellow. Thefull bellow tongue shall be made out of canvas cloth as prescribed in Sl No. (i) of Table 1. Breaking load in N, Min a) Warp )	-	200	-
Cl.4.1.1 upper IS 1969(b)Weft)	-	1300	-
Cl.4.1.1 upper IS 1969(Breaking load in N.Min (5 × 20 cm grip): a) Wrap)	-	1000	-
Cl.4.1.7.2 IS 3400 (Part 16) : 1974(iii)Flexing resistance, number of cycles a)Initial crack, Min)	-	1650	-
4.1.2 Lining Material( 200 N Minin weft way (when tested in accordance with IS 1969 : 1985) )	-	1000	-
4.1.2 Lining Material(For covering of the insole, cotton drill conforming to Table 1, Sl No. (ii) shall be used. For detachable insole, bleached cotton twill of breaking load 390 N Min in warp way and)	-	200	-
Cl.4.1.1 upper(The upper shall consist of Rip Stop Fabric of cotton or manmade or its blend being the over layer and cotton drill as an inner layer and shall conform to the requirements given at Sl No. (i) of Table 1. Sr.no 1.Overlayer Construction )	-	200	-
4.1.1.1 Colour fastness(The dyed fabrics prescribed in 4.1.1 shall be fast to daylight and mechanical washing. Fastness to daylight shall be of rating 4 or better, when tested in accordance with IS 686 : 1985 or IS 2454 : 1985.)	-	1500	-
Cl.4.1.3.3( Black tapes shall be free from sulphur dyes when tested in accordance with Annex B.)	-	1000	-
Cl.4.1.1.2( Fastness to mechanical washing (mild) shall be of rating 4 or better, when tested in accordance with IS 764 : 1979)	-	1500	-
Cl.4.1.4 Reinforcement Material(The back seam, joining two quarters at the back of the heel shall be reinforced with a not less than 25 mm wide tape made out of material conforming to Sl No. (i) of Table 1)	-	200	-
Cl.4.1.5 Thread for Upper Closing Cl.4.1.5.1 (IS 1670:1991)(Sewing thread cotton, man made or blended shall be used for stitching of upper. For cotton variety thread shall conform to variety No. 28 of IS 1720. Polyester variety thread shall conform to variety No. 9 of IS 9543. Any other blend of thread would have breaking load not less than above referred requirements. Sewing thread cotton, manmade or blended shall be used for binding of upper. For cotton variety thread shall conform to variety No. 32 of IS 1720. Polyester variety thread shall conform to variety No. 5 of IS 9543. Any other blend of thread would have breaking load not less than above referred requirement of specification.')	-	1300	-
Cl.4.1.5.2( The colour of the threads shall be asagreed to between the purchaser and the supplier. The dyed threads shall conform to the following requirements)	-	200	-
4.1.6 Fabric Laces Cl.4.1.6.1(The two ends of the lace shall be provided with suitable metal or plastic tips. Black laces shall be free from sulphur dyes when tested in accordance with Annex B.)	-	1300	-
Cl.4.1.7 Rubber Components Cl.4.1.7.1( the soles and heels shall conform to Type 2 of IS 5676:1995.)	-	200	-
Cl.4.1.7.2 IS 3400 (Part 9) : 1978( The rubber components shall conform to Table 4 when tested.' ( Page 3, Table 4, Note 1) — 'However in case it is not possible then 4.2.5.3 of IS 13695:1993 shall be followed. 1)Relative density, Max)	-	7800	-
Cl.4.1.7.5 Thickness of components(Individual components of the boots shall comply with the thickness and material requirements prescribed in Table 6.)	-	300	-
Cl.4.3 Leg Height(The leg height of the boots for size 8 shall be 160 ± 2 mm with an increase or decrease of 4 mm of the nominal height for each bigger or smaller sizes respectively when measured at the inside from the back of the boot from insole to the top.)	-	300	-
Cl.4.4.2( The canvas upper shall be lined with bleached drill cloth.)	-	0	-
Cl.4.4.3( The upper shall be stitched on a lockstitch machine, with 30 to 40 stitches per decimetre by thread of variety No. 8 and variety No. 29 cotton sewing thread conforming to 4.1.5 using variety No. 29 for taping and binding and variety No. 8 for remaining seams. )	-	0	-
Cl.4.4.5 ( The tongue shall be either half or full bellow depending on the requirement of the purchaser andshall be made from composite material prescribed for the upper in 4.1.1.)	-	0	-
Cl.4.4.6( A minimum of seven aluminium, brass or steel eyelets having 10 mm diameter and wall thickness 0.30 to 0.35 mm shall be fitted in each face.')	-	0	-
Cl.4.4.7( The toe shall be reinforced with a toe puff cemented inside and outside with rubber toe cap. The heel piece (counter) or stiffener shall be set from the bottom of the lining and bound flat on the top edge with white cloth for binding of countertop edge with white clothfor binding of counter)	-	0	-
Cl.4.4.8( A strengthening rubber arch piece shall be firmly pasted and stitched at the middle arch of the inside quarter. Another strengthening rubber piece, circular in shape 35 ± 1 mm in diameter, may bepasted and stitched at the centre of the inside)	-	0	-
Cl.4.5.1(Cl.4.1.6.)( Each pair of boot shall be provided with a pair of braided fabric laces of the quality as prescribed in 4.1.6.)	-	200	-
Cl.4.5.2( In appearance, general workmanship, finish and in all other respects, not defined in this standard, the boot shall be similar to those of the sample approved by the purchaser, if any.)	-	200	-
Cl.4.6 Mass(The mass of finished boots, rubber sole, of size 8 shall not exceed 1130 g per pair, and the mass shall increase or decrease by 75 g per pair for each bigger or smaller size respectively.)	-	300	-
Cl.4.9 Composite Breaking Strength Test( From the upper of made up footwear representative sample of width 25 ± 0.5 mm width strip is to be cut along the length of the boot of enough length so as to make it convenient to allow a distance of minimum 30 mm between the jaws of the tensile machine.Rate of traverse of pulling jaw shall be 100 ± 5 mm per minute. Two such test pieces will be required to be obtained from the made up footwear and will be subjected to test to break each test piece. Mean value of each set of test pieces comprising of length wise and height wise test pieces will be 1 000 N/25 mm width minimum.')	-	1650	-
4.1.3.2(Fastness to mechanical washing (mild))	-	1500	-
4.1.3(Cotton tape NEWAR)	-	1300	-
Table 2 (ii)(Breaking load on 50 cm test length. N, Min)	-	1000	-
4.1.6.2(Laces- Fastness to daylight)	-	1500	-
4.1.6.3(Laces- Fastness to mechanical washing (mild))	-	1500	-
IS 1969:1985(Breaking load on 50 cm test length. N, Min)	-	1000	-
Cl.4.4.10( A 25 mm Min wide and 2 mm Min thick rubber golosh in serrated, diamond or any otherdesign, as agreed to between the purchaser and thesupplier, shall be fitted all round the sole edge of the boot. The golosh shall not extend below the edge of the sole.)	-	200	-

31 Dec, 2026

-
Included w.e.f 06.05.2025

IS 3735 (1996)

Canvas Shoes, Rubber Sole

Footwear

20000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.4.5 Consolidation Test IS 3400 (Part 5) : 1986 (From the quarter, cut a strip of 25.0 ± 0.5 mm width along the leagth of the boot and of sufficient length to permit separation over a length of 75 mm. Carry out the test on two test pieces (one from each odd) at the rate of traverse of 100± 10mm per minute in accordance with IS 3400 (Part 5): 1986 or Static Dead Load Method as given in Annex C. The individual adhesion value for consolidation test shall not be less than 30N (3.0 kgf) for each of the teat piecea (see Note under 4.4).')	-	1650	-
4.1.1 Upper, Sl No. (i) of Table 1(The upper shall consist of over layer of cotton, manmade or blended conforming' to the requirements given in Sl No. (i) of Table 1 as an overlayer and cotton drill conforming to the requirements given in Sl No. (ii) of Table 1, as an inner layer or lining. The two fabrics shall be firmly adhered together with rubber compound. )	-	200	-
Cl.4.1.1.1 Colour fastness(The dyed fabrics prescribed in 4.1.1 shall be fast todaylight and mechanical washing. Fastness to daylight shall be of rating 4 or better, when tested in accordance with IS 686 : 1985 or IS 2454: 1985. However in case of dispute the method prescribed in IS 686 : 1985 shall be considered as referee method.)	-	1500	-
Cl.4.1.2 Binding Material(IS 1954 : 1990) (IS1969 : 1985)(Cotton tape NEWAR used as binding material shall conform to the requirements prescribed in col 3 of Table 2, when tested in accordance with the methods referred to in col 4 of the table.)	-	1200	-
Cl.4.1.2.1 Anmex B.(Cotton, manmade or blended shall be used as binding material.' 'Coloured cotton tapes shall have fastness to day light of rating as and if agreed to between the purchaser and the supplier when tested in accordance with IS 686 : 1985. The black tapes shall be free from sulphur dyes when tested in accordance with Annex B.')	-	4000	-
Cl.4.1.3.1( Sewing thread cotton, manmade or blended shall be used for stitching of upper. For cotton variety thread shall conform to variety No. 28 of IS 1720. Polyester variety thread shall conform to variety No. 9 of IS 9543. Any other suitable thread shall have breaking load not less than above referred requirement of specification. Sewing thread cotton, manmade or blended shall be used for binding of upper. For cotton variety thread shall conform to variety No. 32 of IS 1720. Polyester variety thread shall conform to variety No. 5 of IS 9543. Any other suitable thread shall have breaking load not less than above referred requirement of specification.')	-	1200	-
Cl.4.1.3.2 (IS 2454 : 1985) IS 765 : 1979 IS 971 : 1966( The colour of the threads shall be as agreedto between the purchaser and the supplier. The dyed threads shall conform to the following requirements or IS 686 : 1985'.)	-	3500	-
Cl.4.1.4(.Brass, steel or aluminium eyelets of 7.5 mm diameter and wall thickness 0.30 to 0.35 mm shall be used.')	-	200	-
Cl.4.1.5 Laces( The shoes shall be provided with fabric braided laces either matching the shade of the upper or black or The length of the lace shall be 60 ± 3 cm )	-	200	-
Cl.4.1.5 Laces(and shallhave the breaking strength of not less than 250 N when tested between 18 cm grips in accordance with IS 1969 : 1985, the rate of traverse of power actuated grip being 300 mm/min.)	-	1000	-
Cl.4.1.5 Laces Annex B(In case the laces are black, the same shall pass the test for freedom from sulpher dyes when tested in accordance with Annex B. The two ends of the lace shall be provided with suitable metal or plastic tips.)	-	1000	-
Cl.4.1.6 Rubber Components(The rubber components shall conform to the requirements given in Table 4, when tested from finished boots.However in case it is not possible to cut the test pieces from the made up boots then 4.1.5.3 of IS 13695 : 1993 shall be followed.')	-	6300	-
Cl.4.1.6.2 Ageing col 4 of Table 5.(The shoes shall be also aged at 70 ± 1°C for 168 h, on completion of which the test pieces taken from the shoes shall conform to the physical requirements prescribed in col 4 of Table 5. )	-	2700	-
Cl.4.1.6.2 Ageing (None of the rubber components of the shoes shall show any sign of tackiness or crack developed after ageing, when examined visually)	-	2500	-
Cl.4.1.6.3 Thickness of components in Table 6.(Individual components of the shoes shall comply with the thickness and material requirements prescribed in Table 6.)	-	300	-
CL.4.2 Shape and Design IS 1638 : 1969(Cl 4.2.1 The shoes shall be made according to design and pattern as agreed to between the purchaser and the supplier. Size and fittings of the shoes shall be in accordance with IS 1638 : 1969 unless otherwise specified by the purchaser.)	-	200	-
Cl.4.2.2( The recommended design of canvas shoes is shown in Fig. 1.)	-	200	-
Cl.4.3 Construction Cl 4.3.1( The upper shall be stitched on a lock stitch machine and the number of stitches shall be 30 to 40 per dm.)	-	200	-
Cl.'4.3.2( Back of the upper shall be reinforced with a strip of upper material when there is a seam.')	-	200	-
Cl.4.3.3( The counter shall be stitched at the back, set from bottom of lining and bound flat on top edge with white/scoured binding material cut in bias and formed as a tape. T )	-	200	-
Cl.4.3.3(he number of stitches shall be 30 to 40 per decimetre. The counter binding shall meet the binding of the upper at the centre top edge of the heel.)	-	200	-
Cl.4.3.3(The edges of quarter shall be bound with dyed cotton binding material or matching to the colour of the upper, cut in bias and formed as a tape.)	-	200	-
Cl.4.3.4 (The vantp shall be strengthened with a rubber toe-cap (see Fig. 1).)	-	200	-
Cl.4.3.5( Five pairs of eyelets shall be fitted in each shoe. The eyelets shall be properly clenched without any distortion. It shall properly match the colour of the upper canvas, or as agreed to between the purchaser and the supplier.)	-	200	-
Cl.4.3.6( The shoes shall be free from folds, wrinkles in the upper, blisters, embedded foreign matters and excessive surface markings. In appearance, general workmanship, finish and all other respects, not defined in the standard, the shoes shall be similar to the sample approved by the purchaser, if any)	-	200	-
CL.4.3.7( The soles shall be of even substance and ofone layer only.)	-	200	-
Cl.4.3.8( A rubber foxing shall be fixed all round the sole and heel. The colour shall be as agreed to between the purchaser and the supplier. )	-	200	-
Cl.4.3.8(The foxing, not less than 18 mm wide, shall not extend beyond the edges of the sole at the bottom)	-	200	-
Cl.4.4 Adhesion Test(From the upper-foxing portion where it is adhered to the canvas, parallel to the waist of sole, cut a strip of length 100 mm and width 8 mm. Separate out the plies initially by breaking the bond to a length of about 75 mm. Carry out the test on two specimens in accordance with IS 3400 (Part 5) : 1986. There shall be no further separation within 1 minute at a load of 1 kg for each of the two specimens.)	-	1650	-
CL.4.6 Mass(The mass of one pair of finished shoes of size 8 shall not exceed 750 g with an increase or decrease of 25 g for each bigger or smaller size respectively)	-	300	-
Cl.4.5 Consolidation Test IS 3400 (Part 5) : 1986 (From the quarter, cut a strip of 25.0 ± 0.5 mm width along the leagth of the boot and of sufficient length to permit separation over a length of 75 mm. Carry out the test on two test pieces (one from each odd) at the rate of traverse of 100± 10mm per minute in accordance with IS 3400 (Part 5): 1986 or Static Dead Load Method as given in Annex C. The individual adhesion value for consolidation test shall not be less than 30N (3.0 kgf) for each of the teat piecea (see Note under 4.4).')	-	1650	-
4.1.1 Upper, Sl No. (i) of Table 1(The upper shall consist of over layer of cotton, manmade or blended conforming' to the requirements given in Sl No. (i) of Table 1 as an overlayer and cotton drill conforming to the requirements given in Sl No. (ii) of Table 1, as an inner layer or lining. The two fabrics shall be firmly adhered together with rubber compound. )	-	4000	-
Cl.4.1.1.1 Colour fastness(The dyed fabrics prescribed in 4.1.1 shall be fast todaylight and mechanical washing. Fastness to daylight shall be of rating 4 or better, when tested in accordance with IS 686 : 1985 or IS 2454: 1985. However in case of dispute the method prescribed in IS 686 : 1985 shall be considered as referee method.)	-	500	-
Cl.4.1.2 Binding Material(IS 1954 : 1990) (IS1969 : 1985)(Cotton tape NEWAR used as binding material shall conform to the requirements prescribed in col 3 of Table 2, when tested in accordance with the methods referred to in col 4 of the table.)	-	1200	-
Cl.4.1.2.1 Anmex B.(Cotton, manmade or blended shall be used as binding material.' 'Coloured cotton tapes shall have fastness to day light of rating as and if agreed to between the purchaser and the supplier when tested in accordance with IS 686 : 1985. The black tapes shall be free from sulphur dyes when tested in accordance with Annex B.')	-	1000	-
Cl.4.1.3.1( Sewing thread cotton, manmade or blended shall be used for stitching of upper. For cotton variety thread shall conform to variety No. 28 of IS 1720. Polyester variety thread shall conform to variety No. 9 of IS 9543. Any other suitable thread shall have breaking load not less than above referred requirement of specification. Sewing thread cotton, manmade or blended shall be used for binding of upper. For cotton variety thread shall conform to variety No. 32 of IS 1720. Polyester variety thread shall conform to variety No. 5 of IS 9543. Any other suitable thread shall have breaking load not less than above referred requirement of specification.')	-	200	-
Cl.4.1.3.2 (IS 2454 : 1985) IS 765 : 1979 IS 971 : 1966( The colour of the threads shall be as agreedto between the purchaser and the supplier. The dyed threads shall conform to the following requirements or IS 686 : 1985'.)	-	1500	-
Cl.4.1.4(.Brass, steel or aluminium eyelets of 7.5 mm diameter and wall thickness 0.30 to 0.35 mm shall be used.')	-	200	-
Cl.4.1.5 Laces( The shoes shall be provided with fabric braided laces either matching the shade of the upper or black or The length of the lace shall be 60 ± 3 cm )	-	200	-
Cl.4.1.5 Laces(and shallhave the breaking strength of not less than 250 N when tested between 18 cm grips in accordance with IS 1969 : 1985, the rate of traverse of power actuated grip being 300 mm/min.)	-	1000	-
Cl.4.1.5 Laces Annex B(In case the laces are black, the same shall pass the test for freedom from sulpher dyes when tested in accordance with Annex B. The two ends of the lace shall be provided with suitable metal or plastic tips.)	-	1000	-
Cl.4.1.6 Rubber Components(The rubber components shall conform to the requirements given in Table 4, when tested from finished boots.However in case it is not possible to cut the test pieces from the made up boots then 4.1.5.3 of IS 13695 : 1993 shall be followed.')	-	6300	-
Cl.4.1.6.2 Ageing col 4 of Table 5.(The shoes shall be also aged at 70 ± 1°C for 168 h, on completion of which the test pieces taken from the shoes shall conform to the physical requirements prescribed in col 4 of Table 5. )	-	2700	-
Cl.4.1.6.2 Ageing (None of the rubber components of the shoes shall show any sign of tackiness or crack developed after ageing, when examined visually)	-	2500	-
Cl.4.1.6.3 Thickness of components in Table 6.(Individual components of the shoes shall comply with the thickness and material requirements prescribed in Table 6.)	-	300	-
CL.4.2 Shape and Design IS 1638 : 1969(Cl 4.2.1 The shoes shall be made according to design and pattern as agreed to between the purchaser and the supplier. Size and fittings of the shoes shall be in accordance with IS 1638 : 1969 unless otherwise specified by the purchaser.)	-	200	-
Cl.4.2.2( The recommended design of canvas shoes is shown in Fig. 1.)	-	200	-
Cl.4.3 Construction Cl 4.3.1( The upper shall be stitched on a lock stitch machine and the number of stitches shall be 30 to 40 per dm.)	-	200	-
Cl.'4.3.2( Back of the upper shall be reinforced with a strip of upper material when there is a seam.')	-	200	-
Cl.4.3.3( The counter shall be stitched at the back, set from bottom of lining and bound flat on top edge with white/scoured binding material cut in bias and formed as a tape. T )	-	200	-
Cl.4.3.3(he number of stitches shall be 30 to 40 per decimetre. The counter binding shall meet the binding of the upper at the centre top edge of the heel.)	-	200	-
Cl.4.3.3(The edges of quarter shall be bound with dyed cotton binding material or matching to the colour of the upper, cut in bias and formed as a tape.)	-	200	-
Cl.4.3.4 (The vantp shall be strengthened with a rubber toe-cap (see Fig. 1).)	-	200	-
Cl.4.3.5( Five pairs of eyelets shall be fitted in each shoe. The eyelets shall be properly clenched without any distortion. It shall properly match the colour of the upper canvas, or as agreed to between the purchaser and the supplier.)	-	200	-
Cl.4.3.6( The shoes shall be free from folds, wrinkles in the upper, blisters, embedded foreign matters and excessive surface markings. In appearance, general workmanship, finish and all other respects, not defined in the standard, the shoes shall be similar to the sample approved by the purchaser, if any)	-	200	-
CL.4.3.7( The soles shall be of even substance and ofone layer only.)	-	200	-
Cl.4.3.8( A rubber foxing shall be fixed all round the sole and heel. The colour shall be as agreed to between the purchaser and the supplier. )	-	200	-
Cl.4.3.8(The foxing, not less than 18 mm wide, shall not extend beyond the edges of the sole at the bottom)	-	200	-
Cl.4.4 Adhesion Test(From the upper-foxing portion where it is adhered to the canvas, parallel to the waist of sole, cut a strip of length 100 mm and width 8 mm. Separate out the plies initially by breaking the bond to a length of about 75 mm. Carry out the test on two specimens in accordance with IS 3400 (Part 5) : 1986. There shall be no further separation within 1 minute at a load of 1 kg for each of the two specimens.)	-	1650	-
CL.4.6 Mass(The mass of one pair of finished shoes of size 8 shall not exceed 750 g with an increase or decrease of 25 g for each bigger or smaller size respectively)	-	300	-
Cl.4.5 Consolidation Test IS 3400 (Part 5) : 1986 (From the quarter, cut a strip of 25.0 ± 0.5 mm width along the leagth of the boot and of sufficient length to permit separation over a length of 75 mm. Carry out the test on two test pieces (one from each odd) at the rate of traverse of 100± 10mm per minute in accordance with IS 3400 (Part 5): 1986 or Static Dead Load Method as given in Annex C. The individual adhesion value for consolidation test shall not be less than 30N (3.0 kgf) for each of the teat piecea (see Note under 4.4).')	-	1650	-
4.1.1 Upper, Sl No. (i) of Table 1(The upper shall consist of over layer of cotton, manmade or blended conforming' to the requirements given in Sl No. (i) of Table 1 as an overlayer and cotton drill conforming to the requirements given in Sl No. (ii) of Table 1, as an inner layer or lining. The two fabrics shall be firmly adhered together with rubber compound. )	-	400	-
Cl.4.1.1.1 Colour fastness(The dyed fabrics prescribed in 4.1.1 shall be fast todaylight and mechanical washing. Fastness to daylight shall be of rating 4 or better, when tested in accordance with IS 686 : 1985 or IS 2454: 1985. However in case of dispute the method prescribed in IS 686 : 1985 shall be considered as referee method.)	-	1500	-
Cl.4.1.2 Binding Material(IS 1954 : 1990) (IS1969 : 1985)(Cotton tape NEWAR used as binding material shall conform to the requirements prescribed in col 3 of Table 2, when tested in accordance with the methods referred to in col 4 of the table.)	-	1200	-
Cl.4.1.2.1 Anmex B.(Cotton, manmade or blended shall be used as binding material.' 'Coloured cotton tapes shall have fastness to day light of rating as and if agreed to between the purchaser and the supplier when tested in accordance with IS 686 : 1985. The black tapes shall be free from sulphur dyes when tested in accordance with Annex B.')	-	100	-
Cl.4.1.3.1( Sewing thread cotton, manmade or blended shall be used for stitching of upper. For cotton variety thread shall conform to variety No. 28 of IS 1720. Polyester variety thread shall conform to variety No. 9 of IS 9543. Any other suitable thread shall have breaking load not less than above referred requirement of specification. Sewing thread cotton, manmade or blended shall be used for binding of upper. For cotton variety thread shall conform to variety No. 32 of IS 1720. Polyester variety thread shall conform to variety No. 5 of IS 9543. Any other suitable thread shall have breaking load not less than above referred requirement of specification.')	-	200	-
Cl.4.1.3.2 (IS 2454 : 1985) IS 765 : 1979 IS 971 : 1966( The colour of the threads shall be as agreedto between the purchaser and the supplier. The dyed threads shall conform to the following requirements or IS 686 : 1985'.)	-	3500	-
Cl.4.1.4(.Brass, steel or aluminium eyelets of 7.5 mm diameter and wall thickness 0.30 to 0.35 mm shall be used.')	-	200	-
Cl.4.1.5 Laces( The shoes shall be provided with fabric braided laces either matching the shade of the upper or black or The length of the lace shall be 60 ± 3 cm )	-	200	-
Cl.4.1.5 Laces(and shallhave the breaking strength of not less than 250 N when tested between 18 cm grips in accordance with IS 1969 : 1985, the rate of traverse of power actuated grip being 300 mm/min.)	-	1000	-
Cl.4.1.5 Laces Annex B(In case the laces are black, the same shall pass the test for freedom from sulpher dyes when tested in accordance with Annex B. The two ends of the lace shall be provided with suitable metal or plastic tips.)	-	1000	-
Cl.4.1.6 Rubber Components(The rubber components shall conform to the requirements given in Table 4, when tested from finished boots.However in case it is not possible to cut the test pieces from the made up boots then 4.1.5.3 of IS 13695 : 1993 shall be followed.')	-	4000	-
Cl.4.1.6.2 Ageing col 4 of Table 5.(The shoes shall be also aged at 70 ± 1°C for 168 h, on completion of which the test pieces taken from the shoes shall conform to the physical requirements prescribed in col 4 of Table 5. )	-	2700	-
Cl.4.1.6.2 Ageing (None of the rubber components of the shoes shall show any sign of tackiness or crack developed after ageing, when examined visually)	-	2500	-
Cl.4.1.6.3 Thickness of components in Table 6.(Individual components of the shoes shall comply with the thickness and material requirements prescribed in Table 6.)	-	300	-
CL.4.2 Shape and Design IS 1638 : 1969(Cl 4.2.1 The shoes shall be made according to design and pattern as agreed to between the purchaser and the supplier. Size and fittings of the shoes shall be in accordance with IS 1638 : 1969 unless otherwise specified by the purchaser.)	-	200	-
Cl.4.2.2( The recommended design of canvas shoes is shown in Fig. 1.)	-	200	-
Cl.4.3 Construction Cl 4.3.1( The upper shall be stitched on a lock stitch machine and the number of stitches shall be 30 to 40 per dm.)	-	200	-
Cl.'4.3.2( Back of the upper shall be reinforced with a strip of upper material when there is a seam.')	-	200	-
Cl.4.3.3( The counter shall be stitched at the back, set from bottom of lining and bound flat on top edge with white/scoured binding material cut in bias and formed as a tape. T )	-	200	-
Cl.4.3.3(he number of stitches shall be 30 to 40 per decimetre. The counter binding shall meet the binding of the upper at the centre top edge of the heel.)	-	200	-
Cl.4.3.3(The edges of quarter shall be bound with dyed cotton binding material or matching to the colour of the upper, cut in bias and formed as a tape.)	-	200	-
Cl.4.3.4 (The vantp shall be strengthened with a rubber toe-cap (see Fig. 1).)	-	200	-
Cl.4.3.5( Five pairs of eyelets shall be fitted in each shoe. The eyelets shall be properly clenched without any distortion. It shall properly match the colour of the upper canvas, or as agreed to between the purchaser and the supplier.)	-	200	-
Cl.4.3.6( The shoes shall be free from folds, wrinkles in the upper, blisters, embedded foreign matters and excessive surface markings. In appearance, general workmanship, finish and all other respects, not defined in the standard, the shoes shall be similar to the sample approved by the purchaser, if any)	-	200	-
CL.4.3.7( The soles shall be of even substance and ofone layer only.)	-	200	-
Cl.4.3.8( A rubber foxing shall be fixed all round the sole and heel. The colour shall be as agreed to between the purchaser and the supplier. )	-	200	-
Cl.4.3.8(The foxing, not less than 18 mm wide, shall not extend beyond the edges of the sole at the bottom)	-	200	-
Cl.4.4 Adhesion Test(From the upper-foxing portion where it is adhered to the canvas, parallel to the waist of sole, cut a strip of length 100 mm and width 8 mm. Separate out the plies initially by breaking the bond to a length of about 75 mm. Carry out the test on two specimens in accordance with IS 3400 (Part 5) : 1986. There shall be no further separation within 1 minute at a load of 1 kg for each of the two specimens.)	-	1650	-
CL.4.6 Mass(The mass of one pair of finished shoes of size 8 shall not exceed 750 g with an increase or decrease of 25 g for each bigger or smaller size respectively)	-	300	-
4.8(Adhesion )	-	1650	-
4.7(Consolidation test )	-	1650	-
4.6(Mass )	-	300	-
4.5(Finish )	-	200	-
4.4(Contruction )	-	200	-
4.3(Leg Height )	-	300	-
4.2(Design )	-	200	-
4.1.6.2(Thickness of components )	-	300	-
4.1.6.2(Ageing)	-	2500	-
4.1.6.2(Elongation at break after ageing )	-	2700	-
4.1.6.2(Tensile after ageing )	-	0	-
4.1.6(Compression set )	-	1500	-
4.1.6(Elongation at break )	-	900	-
4.1.6(Tensile strength)	-	0	-
4.1.6(Hardness (after accelerated ))	-	2700	-
4.1.6(Flexing resistance test)	-	1650	-
4.1.6(Hardness )	-	650	-
4.1.6(Relative density)	-	400	-
4.1.5(Sulpher dyes content )	-	1000	-
4.1.5(Breaking Load )	-	1000	-
4.1.5(Length )	-	300	-
4.1.4(Thickness)	-	300	-
4.1.4(Size )	-	200	-
4.1.3(Color fastness to perspiration)	-	500	-
4.1.3(Colorfastness to washing)	-	1500	-
4.1.3(Colorfastness to light )	-	1500	-
4.1.3(Single thread breaking load)	-	1000	-
4.1.3(Construction )	-	200	-
4.1.2(Colorfastness to light )	-	1500	-
4.1.2(Colorfastness to washing)	-	1500	-
4.1.2(Breaking Strength )	-	1000	-
4.1.2(Width )	-	200	-
4.1.1.2(Colorfastness to washing)	-	1500	-
4.1.1.1(Colorfastness to light )	-	1500	-
4.1.1 (Drill) (End & Picks/dm)	-	300	-
4.1.1 (Drill) (Colorfastness to light )	-	1500	-
4.1.1 (canvas )(End & Picks/dm)	-	300	-
4.1.1 (canvas )(Breaking Load )	-	1000	-
5, 5.1, Cl. 5.2, Cl. 5.2.1, Cl. 5.2.1.1(Packing and marking)	-	200	-
" CL. 5.1, Cl. 5.2, Cl. 5.2.1, Cl. 5.2.1.1(Packing and marking ")	-	200	-

31 Dec, 2026

-
Included w.e.f 21.05.2025

1
2
3
Next
Last

Bureau of Indian Standards

The National Standards Body of India

BUREAU VERITAS CONSUMER PRODUCTS SERVICES INDIA PRIVATE LIMITED, NOIDA

C-19, Sector -7, Noida, Gautam Buddha Nagar, Uttar Pradesh, 201301

9818494127 monika.ahuja@bureauveritas.com

Scope List