BIS - LIMS (Laboratory Information Management System)

ACCURATE TEST SOLUTIONS LLP (F21), NOIDA

F 21 SECTOR 11 NOIDA 201301, NOIDA, Gautam Buddha Nagar, Uttar Pradesh, 201301

9810820552 -

Scope List

Reset

49 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

IS 16046 : Part 2 (2018)

Secondary Cells and Batteries Containing Alkaline or Other Non-Acid Electrolytes ” Safety Requirements for Portable Sealed Secondary Cells and for Batteries Made from Them for Use in Portable Applications Part 2 Lithium Systems ( Second Revision )

60000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Parameter Measurement Tolerances)	-	100	10 % discount (BIS)
5(General Safety Considerations)	-	100	10 % discount (BIS)
5.1(General)	-	250	10 % discount (BIS)
5.2(Insulation and Wiring)	-	250	10 % discount (BIS)
5.3(Venting)	-	250	10 % discount (BIS)
5.4(Temperature, Voltage and Current Management)	-	250	10 % discount (BIS)
5.5(Terminal Contacts)	-	250	10 % discount (BIS)
5.6(Assembly of Cells into batteries)	-	250	10 % discount (BIS)
5.7(Quality Plan)	-	200	10 % discount (BIS)
5.8(Battery Safety Components)	-	200	10 % discount (BIS)
6(Type Test and Sample Size)	-	100	10 % discount (BIS)
7(Specific requirements and tests)	-	100	10 % discount (BIS)
7.1(Charging procedure for test purposes)	-	8000	10 % discount (BIS)
7.2(Intended Use)	-	10000	10 % discount (BIS)
7.3(Reasonably foreseeable misuse)	-	30000	10 % discount (BIS)
8(Information for safety)	-	1000	10 % discount (BIS)
8.1(General)	-	1000	10 % discount (BIS)
8.2(Small Cell and battery safety information)	-	1000	10 % discount (BIS)
9(Marking)	-	200	10 % discount (BIS)
9.1(Cell Marking)	-	1500	10 % discount (BIS)
9.2(Battery Marking)	-	1500	10 % discount (BIS)
9.3(Caution for ingestion of small cells and batteries)	-	1500	10 % discount (BIS)
9.4(Other information)	-	1000	10 % discount (BIS)
10(Packaging)	-	1000	10 % discount (BIS)
clause 7.3.1 of IS 16047: Part 3(Discharge performance at 20 °C (rated capacity))	-	10000	10 % discount (BIS)
clause 7.3.1 of IS 16047: Part 3(Discharge performance at 20 °C (rated capacity))	-	0	-

04 Jul, 2027

-
-

IS/IEC 62368 : Part 1 (2023)

Audio Video Information and Communication Technology Equipment - Part 1: Safety Requirements (Second Revision)

50000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4.1(General- materials, components)	-	1000	-
Cl-4.2(Energy source classifications)	-	1000	-
Cl-4.3(Protection against energy sources)	-	1000	-
Cl-4.4(Safeguards)	-	1000	-
Cl-4.5(Explosion)	-	1000	-
Cl-4.6(Fixing of conductors and conductive parts)	-	1000	-
Cl-4.7(Equipment for direct insertion into mains socket-outlets)	-	1000	-
Cl-4.8(Equipment containing coin or button cell batteries)	-	1000	-
Cl-4.9(Likelihood of fire or shock due to entry of conductive objects)	-	1000	-
Cl-4.10(Components requirements)	-	1000	-
Cl-5.1(General- Electrically-caused injury)	-	1000	-
Cl-5.2(Classification and limits of electrical energy sources)	-	1000	-
Cl-5.3(Protection against electrical energy sources)	-	1000	-
Cl-5.4(Insulation materials and requirements)	-	1000	-
Cl-5.5(Components as safeguards)	-	1000	-
Cl-5.6(Protective conductor)	-	1000	-
Cl-5.7(Prospective touch voltage, touch current and protective conductor current)	-	1000	-
Cl-5.8(Backfeed safeguard in battery backed up supplies)	-	1000	-
Cl-6.1(General- Electrically-caused fire)	-	1000	-
Cl-6.2(Classification of power sources and potential ignition sources)	-	1000	-
Cl-6.3(Safeguards against fire under normal operating conditions and abnormal operating conditions)	-	1000	-
Cl-6.4(Safeguards against fire under single fault conditions)	-	1000	-
Cl-6.5(Internal and external wiring)	-	1000	-
Cl-7.1(General- Injury caused by hazardous substances)	-	1000	-
Cl-7.2(Reduction of exposure to hazardous substances)	-	1000	-
Cl-7.3(Ozone exposure)	-	1000	-
Cl-7.4(Use of personal safeguards or personal protective equipment (PPE)	-	1000	-
Cl-7.5(Use of instructional safeguards and instructions)	-	1000	-
Cl-8.1(General- Mechanically-caused injury)	-	1000	-
Cl-8.2(Mechanical energy source classifications)	-	1000	-
Cl-8.3(Safeguards against mechanical energy sources)	-	1000	-
Cl-8.4(Safeguards against parts with sharp edges and corners)	-	1000	-
Cl-8.5(Safeguards against moving parts)	-	1000	-
Cl-8.6(Stability of equipment)	-	1000	-
Cl-8.7(Equipment mounted to a wall, ceiling or other structure)	-	1000	-
Cl-8.8(Handle strength)	-	1000	-
Cl-8.9(Wheels or casters attachment requirements)	-	1000	-
Cl-8.10(Carts, stands, and similar carriers)	-	1000	-
Cl-8.11(Mounting means for slide-rail mounted equipment (SRME))	-	1000	-
Cl-9.1(General-Thermal burn injury)	-	1000	-
Cl-9.2(Thermal energy source classifications)	-	1000	-
Cl-9.3(Touch temperature limits)	-	1000	-
Cl-9.4(Safeguards against thermal energy sources)	-	1000	-
Cl-9.5(Requirements for safeguards)	-	1000	-
Annex A(Examples of equipment within the scope of this document)	-	1000	-
Annex B(General- Normal operating condition tests, abnormal operating condition tests and single fault condition tests)	-	1000	-
Annex B-2(Normal operating conditions)	-	1000	-
Annex B-3(Simulated abnormal operating conditions)	-	1000	-
Annex B-4(Simulated single fault conditions)	-	1000	-
Annex D-1(Impulse test generators)	-	1000	-
Annex D-2(Antenna interface test generator)	-	1000	-
Annex E-1(Electrical energy source classification for audio signals)	-	1000	-
Annex E-2(Audio signals used during test)	-	1000	-
Annex E-3(Operating conditions of equipment containing an audio amplifier)	-	1000	-
Annex F-1(General-Equipment markings, instructions, and instructional safeguards)	-	1000	-
Annex F-2(Letter symbols and graphical symbols)	-	1000	-
Annex F-3(Equipment markings)	-	1000	-
Annex F-4(Instructions)	-	1000	-
Annex F-5(Instructional safeguards)	-	1000	-
Annex G-4(Connectors)	-	1000	-
Annex G-12(Optocouplers)	-	1000	-
Annex G-13(Printed boards)	-	1000	-
Annex G-14(Coatings on component terminals)	-	1000	-
Annex H-1(General- Criteria for telephone ringing signals)	-	1000	-
Annex H-2(Method A)	-	1000	-
Annex H-3(Method B)	-	1000	-
Annex I(Overvoltage categories (see IEC 60364-4-44))	-	1000	-
Annex K-1(General- Safety interlocks)	-	1000	-
Annex K-3(Inadvertent change of operating mode)	-	1000	-
Annex K-4(Interlock safeguard override)	-	1000	-
Annex K-5(Fail-safe)	-	1000	-
Annex L-1(General requirements)	-	1000	-
Annex L-2(Permanently connected equipment)	-	1000	-
Annex L-3()	-	1000	-
Annex L-4(Single-phase equipment)	-	1000	-
Annex L-5(Three-phase equipment)	-	1000	-
Annex L-6(Switches as disconnect devices)	-	1000	-
Annex L-7(Plugs as disconnect devices)	-	1000	-
Annex L-8(Multiple power sources)	-	1000	-
Annex L-9(Compliance criteria)	-	1000	-
Annex M-1(General requirements)	-	1000	-
Annex M-2(Safety of batteries and their cells)	-	1000	-
Annex M-3(Protection circuits for batteries provided within the equipment)	-	1000	-
Annex M-4(Additional safeguards for equipment containing a secondary lithium battery)	-	1000	-
Annex M-5(Risk of burn due to short-circuit during carrying)	-	1000	-
Annex M-6(Safeguards against short-circuits)	-	1000	-
Annex M-9(Preventing electrolyte spillage)	-	1000	-
Annex M-10(Instructions to prevent reasonably foreseeable misuse)	-	1000	-
Annex N(Electrochemical potentials (V))	-	1000	-
Annex O(Measurement of creepage distances and clearances)	-	1000	-
Annex P-1(General-Safeguards against conductive objects)	-	1000	-
Annex P-2(Safeguards against entry or consequences of entry of a foreign object)	-	1000	-
Annex P-3(Safeguards against spillage of internal liquids)	-	1000	-
Annex P-4(Metallized coatings and adhesives securing parts)	-	1000	-
Annex Q-1(Limited power source)	-	1000	-
Annex Q-2(Test for external circuits – paired conductor cable)	-	1000	-
Annex S-1(Flammability test for fire enclosure and fire barrier materials of equipment where the steady state power does not exceed 4 000 W)	-	1000	-
Annex S-2(Flammability test for fire enclosure and fire barrier integrity)	-	1000	-
Annex S-3(Flammability tests for the bottom of a fire enclosure)	-	1000	-
Annex S-4(Flammability classification of materials)	-	1000	-
Annex S-5(Flammability test for fire enclosure materials of equipment with a steady state power exceeding 4 000 W)	-	1000	-
Annex T-1(General-Mechanical strength tests)	-	1000	-
Annex T-2(Steady force test, 10 N)	-	1000	-
Annex T-3(Steady force test, 30 N)	-	1000	-
Annex T-4(Steady force test, 100 N)	-	1000	-
Annex T-5(Steady force test, 250 N)	-	1000	-
Annex T-6(Enclosure impact test)	-	1000	-
Annex T-7(Drop test)	-	1000	-
Annex T-8(Stress relief test)	-	1000	-
Annex T-9(Glass impact test)	-	1000	-
Annex T-10(Glass fragmentation test)	-	1000	-
Annex T-11(Test for telescoping or rod antennas)	-	1000	-
Annex V-1(Accessible parts of equipment)	-	1000	-
Annex V-2(Accessible part criterion)	-	1000	-
Annex X("Alternative method for determining clearances for insulation in circuits connected to an AC mains not exceeding 420 V peak (300 V RMS)")	-	1000	-
Annex Y-1(General- Construction requirements for outdoor enclosures)	-	1000	-
Annex Y-3(Resistance to corrosion)	-	1000	-
Annex Y-5(Protection of equipment within an outdoor enclosure)	-	1000	-
Annex Y-6(Mechanical strength of enclosures)	-	1000	-
Annex J-1(General-Insulated winding wires for use without interleaved insulation)	-	1000	-
Annex J-2(Type tests)	-	1000	-
Annex J-3(Testing during manufacturing)	-	1000	-
Annex G-5(Wound components)	-	1000	-
Annex G-6(Wire insulation)	-	1000	-
Annex G-9(Integrated circuit (IC) current limiters)	-	1000	-
Annex W(Comparison of terms introduced in this document)	-	1000	-
Cl-4.1(General- materials, components)	-	1000	-
Cl-4.2(Energy source classifications)	-	999.99	-
Cl-4.3(Protection against energy sources)	-	1000	-
Cl-4.4(Safeguards)	-	999.99	-
Cl-4.5(Explosion)	-	999.98	-
Cl-4.6(Fixing of conductors and conductive parts)	-	999.99	-
Cl-4.7(Equipment for direct insertion into mains socket-outlets)	-	999.99	-
Cl-4.8(Equipment containing coin or button cell batteries)	-	1000	-
Cl-4.9(Likelihood of fire or shock due to entry of conductive objects)	-	1000	-
Cl-4.10(Components requirements)	-	1000	-
Cl-5.1(General- Electrically-caused injury)	-	1000	-
Cl-5.2(Classification and limits of electrical energy sources)	-	1000	-
Cl-5.3(Protection against electrical energy sources)	-	999.99	-
Cl-5.4(Insulation materials and requirements)	-	1000	-
Cl-5.5(Components as safeguards)	-	999.99	-
Cl-5.6(Protective conductor)	-	999.99	-
Cl-5.7(Prospective touch voltage, touch current and protective conductor current)	-	999.99	-
Cl-5.8(Backfeed safeguard in battery backed up supplies)	-	999.98	-
Cl-6.1(General- Electrically-caused fire)	-	999.99	-
Cl-6.2(Classification of power sources and potential ignition sources)	-	999.99	-
Cl-6.3(Safeguards against fire under normal operating conditions and abnormal operating conditions)	-	999.99	-
Cl-6.4(Safeguards against fire under single fault conditions)	-	999.99	-
Cl-6.5(Internal and external wiring)	-	999.99	-
Cl-7.1(General- Injury caused by hazardous substances)	-	999.99	-
Cl-7.2(Reduction of exposure to hazardous substances)	-	999.99	-
Cl-7.3(Ozone exposure)	-	999.99	-
Cl-7.4(Use of personal safeguards or personal protective equipment (PPE)	-	999.99	-
Cl-7.5(Use of instructional safeguards and instructions)	-	999.99	-
Cl-8.1(General- Mechanically-caused injury)	-	999.99	-
Cl-8.2(Mechanical energy source classifications)	-	999.99	-
Cl-8.3(Safeguards against mechanical energy sources)	-	1000	-
Cl-8.4(Safeguards against parts with sharp edges and corners)	-	999.99	-
Cl-8.5(Safeguards against moving parts)	-	1000	-
Cl-8.6(Stability of equipment)	-	1000	-
Cl-8.7(Equipment mounted to a wall, ceiling or other structure)	-	1000	-
Cl-8.8(Handle strength)	-	1000	-
Cl-8.9(Wheels or casters attachment requirements)	-	999.99	-
Cl-8.10(Carts, stands, and similar carriers)	-	999.99	-
Cl-8.11(Mounting means for slide-rail mounted equipment (SRME))	-	999.99	-
Cl-9.1(General-Thermal burn injury)	-	999.99	-
Cl-9.2(Thermal energy source classifications)	-	999.99	-
Cl-9.3(Touch temperature limits)	-	999.98	-
Cl-9.4(Safeguards against thermal energy sources)	-	999.99	-
Cl-9.5(Requirements for safeguards)	-	999.98	-
Annex A(Examples of equipment within the scope of this document)	-	999.98	-
Annex B(General- Normal operating condition tests, abnormal operating condition tests and single fault condition tests)	-	999.99	-
Annex B-2(Normal operating conditions)	-	999.99	-
Annex B-3(Simulated abnormal operating conditions)	-	1000	-
Annex B-4(Simulated single fault conditions)	-	1000	-
Annex D-1(Impulse test generators)	-	999.99	-
Annex D-2(Antenna interface test generator)	-	999.99	-
Annex E-1(Electrical energy source classification for audio signals)	-	1000	-
Annex E-2(Audio signals used during test)	-	999.98	-
Annex E-3(Operating conditions of equipment containing an audio amplifier)	-	1000	-
Annex F-1(General-Equipment markings, instructions, and instructional safeguards)	-	1000	-
Annex F-2(Letter symbols and graphical symbols)	-	1000	-
Annex F-3(Equipment markings)	-	999.98	-
Annex F-4(Instructions)	-	999.98	-
Annex F-5(Instructional safeguards)	-	1000	-
Annex G-4(Connectors)	-	1000	-
Annex G-12(Optocouplers)	-	1000	-
Annex G-13(Printed boards)	-	1000	-
Annex G-14(Coatings on component terminals)	-	999.97	-
Annex H-1(General- Criteria for telephone ringing signals)	-	1000	-
Annex H-2(Method A)	-	999.99	-
Annex H-3(Method B)	-	999.98	-
Annex I(Overvoltage categories (see IEC 60364-4-44))	-	1000	-
Annex K-1(General- Safety interlocks)	-	1000	-
Annex K-3(Inadvertent change of operating mode)	-	1000	-
Annex K-4(Interlock safeguard override)	-	1000	-
Annex K-5(Fail-safe)	-	1000	-
Annex L-1(General requirements)	-	1000	-
Annex L-2(Permanently connected equipment)	-	1000	-
Annex L-3()	-	999.98	-
Annex L-4(Single-phase equipment)	-	1000	-
Annex L-5(Three-phase equipment)	-	999.99	-
Annex L-6(Switches as disconnect devices)	-	999.98	-
Annex L-7(Plugs as disconnect devices)	-	1000	-
Annex L-8(Multiple power sources)	-	1000	-
Annex L-9(Compliance criteria)	-	999.98	-
Annex M-1(General requirements)	-	1000	-
Annex M-2(Safety of batteries and their cells)	-	999.99	-
Annex M-3(Protection circuits for batteries provided within the equipment)	-	1000	-
Annex M-4(Additional safeguards for equipment containing a secondary lithium battery)	-	1000	-
Annex M-5(Risk of burn due to short-circuit during carrying)	-	999.99	-
Annex M-6(Safeguards against short-circuits)	-	999.99	-
Annex M-9(Preventing electrolyte spillage)	-	1000	-
Annex M-10(Instructions to prevent reasonably foreseeable misuse)	-	999.98	-
Annex N(Electrochemical potentials (V))	-	1000	-
Annex O(Measurement of creepage distances and clearances)	-	999.99	-
Annex P-1(General-Safeguards against conductive objects)	-	1000	-
Annex P-2(Safeguards against entry or consequences of entry of a foreign object)	-	1000	-
Annex P-3(Safeguards against spillage of internal liquids)	-	999.99	-
Annex P-4(Metallized coatings and adhesives securing parts)	-	1000	-
Annex Q-1(Limited power source)	-	1000	-
Annex Q-2(Test for external circuits – paired conductor cable)	-	1000	-
Annex S-1(Flammability test for fire enclosure and fire barrier materials of equipment where the steady state power does not exceed 4 000 W)	-	1000.02	-
Annex S-2(Flammability test for fire enclosure and fire barrier integrity)	-	1000	-
Annex S-3(Flammability tests for the bottom of a fire enclosure)	-	1000	-
Annex S-4(Flammability classification of materials)	-	1000.02	-
Annex S-5(Flammability test for fire enclosure materials of equipment with a steady state power exceeding 4 000 W)	-	1000.02	-
Annex T-1(General-Mechanical strength tests)	-	1000.01	-
Annex T-2(Steady force test, 10 N)	-	1000	-
Annex T-3(Steady force test, 30 N)	-	1000	-
Annex T-4(Steady force test, 100 N)	-	1000	-
Annex T-5(Steady force test, 250 N)	-	1000	-
Annex T-6(Enclosure impact test)	-	1000.02	-
Annex T-7(Drop test)	-	1000	-
Annex T-8(Stress relief test)	-	1000	-
Annex T-9(Glass impact test)	-	1000	-
Annex T-10(Glass fragmentation test)	-	1000	-
Annex T-11(Test for telescoping or rod antennas)	-	1000	-
Annex V-1(Accessible parts of equipment)	-	1000	-
Annex V-2(Accessible part criterion)	-	1000	-
Annex X("Alternative method for determining clearances for insulation in circuits connected to an AC mains not exceeding 420 V peak (300 V RMS)")	-	1000	-
Annex Y-1(General- Construction requirements for outdoor enclosures)	-	1000.01	-
Annex Y-3(Resistance to corrosion)	-	1000.01	-
Annex Y-5(Protection of equipment within an outdoor enclosure)	-	1000.01	-
Annex Y-6(Mechanical strength of enclosures)	-	1000.04	-
Annex J-1(General-Insulated winding wires for use without interleaved insulation)	-	999.99	-
Annex J-2(Type tests)	-	999.99	-
Annex J-3(Testing during manufacturing)	-	999.99	-
Annex G-5(Wound components)	-	1000	-
Annex G-6(Wire insulation)	-	1000	-
Annex G-9(Integrated circuit (IC) current limiters)	-	999.99	-
Annex W(Comparison of terms introduced in this document)	-	1000	-
Cl-9.6(Requirements for wireless power transmitters)	-	1000	-
Cl-4.1(General- materials, components)	-	-	-
Cl-4.2(Energy source classifications)	-	-	-
Cl-4.3(Protection against energy sources)	-	-	-
Cl-4.4(Safeguards)	-	-	-
Cl-4.5(Explosion)	-	-	-
Cl-4.6(Fixing of conductors and conductive parts)	-	-	-
Cl-4.7(Equipment for direct insertion into mains socket-outlets)	-	-	-
Cl-4.8(Equipment containing coin or button cell batteries)	-	-	-
Cl-4.9(Likelihood of fire or shock due to entry of conductive objects)	-	-	-
Cl-4.10(Components requirements)	-	-	-
Cl-5.1(General- Electrically-caused injury)	-	-	-
Cl-5.2(Classification and limits of electrical energy sources)	-	-	-
Cl-5.3(Protection against electrical energy sources)	-	-	-
Cl-5.4(Insulation materials and requirements)	-	-	-
Cl-5.5(Components as safeguards)	-	-	-
Cl-5.6(Protective conductor)	-	-	-
Cl-5.7(Prospective touch voltage, touch current and protective conductor current)	-	-	-
Cl-5.8(Backfeed safeguard in battery backed up supplies)	-	-	-
Cl-6.1(General- Electrically-caused fire)	-	-	-
Cl-6.2(Classification of power sources and potential ignition sources)	-	-	-
Cl-6.3(Safeguards against fire under normal operating conditions and abnormal operating conditions)	-	-	-
Cl-6.4(Safeguards against fire under single fault conditions)	-	-	-
Cl-6.5(Internal and external wiring)	-	-	-
Cl-7.1(General- Injury caused by hazardous substances)	-	-	-
Cl-7.2(Reduction of exposure to hazardous substances)	-	-	-
Cl-7.3(Ozone exposure)	-	-	-
Cl-7.4(Use of personal safeguards or personal protective equipment (PPE)	-	-	-
Cl-7.5(Use of instructional safeguards and instructions)	-	-	-
Cl-8.1(General- Mechanically-caused injury)	-	-	-
Cl-8.2(Mechanical energy source classifications)	-	-	-
Cl-8.3(Safeguards against mechanical energy sources)	-	-	-
Cl-8.4(Safeguards against parts with sharp edges and corners)	-	-	-
Cl-8.5(Safeguards against moving parts)	-	-	-
Cl-8.6(Stability of equipment)	-	-	-
Cl-8.7(Equipment mounted to a wall, ceiling or other structure)	-	-	-
Cl-8.8(Handle strength)	-	-	-
Cl-8.9(Wheels or casters attachment requirements)	-	-	-
Cl-8.10(Carts, stands, and similar carriers)	-	-	-
Cl-8.11(Mounting means for slide-rail mounted equipment (SRME))	-	-	-
Cl-9.1(General-Thermal burn injury)	-	-	-
Cl-9.2(Thermal energy source classifications)	-	-	-
Cl-9.3(Touch temperature limits)	-	-	-
Cl-9.4(Safeguards against thermal energy sources)	-	-	-
Cl-9.5(Requirements for safeguards)	-	-	-
Annex A(Examples of equipment within the scope of this document)	-	-	-
Annex B(General- Normal operating condition tests, abnormal operating condition tests and single fault condition tests)	-	-	-
Annex B-2(Normal operating conditions)	-	-	-
Annex B-3(Simulated abnormal operating conditions)	-	-	-
Annex B-4(Simulated single fault conditions)	-	-	-
Annex D-1(Impulse test generators)	-	-	-
Annex D-2(Antenna interface test generator)	-	-	-
Annex E-1(Electrical energy source classification for audio signals)	-	-	-
Annex E-2(Audio signals used during test)	-	-	-
Annex E-3(Operating conditions of equipment containing an audio amplifier)	-	-	-
Annex F-1(General-Equipment markings, instructions, and instructional safeguards)	-	-	-
Annex F-2(Letter symbols and graphical symbols)	-	-	-
Annex F-3(Equipment markings)	-	-	-
Annex F-4(Instructions)	-	-	-
Annex F-5(Instructional safeguards)	-	-	-
Annex G-4(Connectors)	-	-	-
Annex G-12(Optocouplers)	-	-	-
Annex G-13(Printed boards)	-	-	-
Annex G-14(Coatings on component terminals)	-	-	-
Annex H-1(General- Criteria for telephone ringing signals)	-	-	-
Annex H-2(Method A)	-	-	-
Annex H-3(Method B)	-	-	-
Annex I(Overvoltage categories (see IEC 60364-4-44))	-	-	-
Annex K-1(General- Safety interlocks)	-	-	-
Annex K-3(Inadvertent change of operating mode)	-	-	-
Annex K-4(Interlock safeguard override)	-	-	-
Annex K-5(Fail-safe)	-	-	-
Annex L-1(General requirements)	-	-	-
Annex L-2(Permanently connected equipment)	-	-	-
Annex L-3()	-	-	-
Annex L-4(Single-phase equipment)	-	-	-
Annex L-5(Three-phase equipment)	-	-	-
Annex L-6(Switches as disconnect devices)	-	-	-
Annex L-7(Plugs as disconnect devices)	-	-	-
Annex L-8(Multiple power sources)	-	-	-
Annex L-9(Compliance criteria)	-	-	-
Annex M-1(General requirements)	-	-	-
Annex M-2(Safety of batteries and their cells)	-	-	-
Annex M-3(Protection circuits for batteries provided within the equipment)	-	-	-
Annex M-4(Additional safeguards for equipment containing a secondary lithium battery)	-	-	-
Annex M-5(Risk of burn due to short-circuit during carrying)	-	-	-
Annex M-6(Safeguards against short-circuits)	-	-	-
Annex M-9(Preventing electrolyte spillage)	-	-	-
Annex M-10(Instructions to prevent reasonably foreseeable misuse)	-	-	-
Annex N(Electrochemical potentials (V))	-	-	-
Annex O(Measurement of creepage distances and clearances)	-	-	-
Annex P-1(General-Safeguards against conductive objects)	-	-	-
Annex P-2(Safeguards against entry or consequences of entry of a foreign object)	-	-	-
Annex P-3(Safeguards against spillage of internal liquids)	-	-	-
Annex P-4(Metallized coatings and adhesives securing parts)	-	-	-
Annex Q-1(Limited power source)	-	-	-
Annex Q-2(Test for external circuits – paired conductor cable)	-	-	-
Annex S-1(Flammability test for fire enclosure and fire barrier materials of equipment where the steady state power does not exceed 4 000 W)	-	-	-
Annex S-2(Flammability test for fire enclosure and fire barrier integrity)	-	-	-
Annex S-3(Flammability tests for the bottom of a fire enclosure)	-	-	-
Annex S-4(Flammability classification of materials)	-	-	-
Annex S-5(Flammability test for fire enclosure materials of equipment with a steady state power exceeding 4 000 W)	-	-	-
Annex T-1(General-Mechanical strength tests)	-	-	-
Annex T-2(Steady force test, 10 N)	-	-	-
Annex T-3(Steady force test, 30 N)	-	-	-
Annex T-4(Steady force test, 100 N)	-	-	-
Annex T-5(Steady force test, 250 N)	-	-	-
Annex T-6(Enclosure impact test)	-	-	-
Annex T-7(Drop test)	-	-	-
Annex T-8(Stress relief test)	-	-	-
Annex T-9(Glass impact test)	-	-	-
Annex T-10(Glass fragmentation test)	-	-	-
Annex T-11(Test for telescoping or rod antennas)	-	-	-
Annex V-1(Accessible parts of equipment)	-	-	-
Annex V-2(Accessible part criterion)	-	-	-
Annex X("Alternative method for determining clearances for insulation in circuits connected to an AC mains not exceeding 420 V peak (300 V RMS)")	-	-	-
Annex Y-1(General- Construction requirements for outdoor enclosures)	-	-	-
Annex Y-3(Resistance to corrosion)	-	-	-
Annex Y-5(Protection of equipment within an outdoor enclosure)	-	-	-
Annex Y-6(Mechanical strength of enclosures)	-	-	-
Annex J-1(General-Insulated winding wires for use without interleaved insulation)	-	-	-
Annex J-2(Type tests)	-	-	-
Annex J-3(Testing during manufacturing)	-	-	-
Annex G-5(Wound components)	-	-	-
Annex G-6(Wire insulation)	-	-	-
Annex G-9(Integrated circuit (IC) current limiters)	-	-	-
Annex W(Comparison of terms introduced in this document)	-	-	-
Cl-9.6(Requirements for wireless power transmitters)	-	-	-

04 Jul, 2027

-
Included w.e.f. 05.05.2026 Exclusion: "Annex C-1 (Protection of materials in equipment from UV radiation) Annex C-2 (UV light conditioning test) Annex D-3 (Electronic pulse generator) Annex G-1 (Switches) Annex G-10 (Resistors) Annex G-11 (Capacitors and RC units) Annex G-15 (Pressurized liquid filled components or LFC assemblies) Annex G-16 (IC that includes a capacitor discharge function (ICX)) Annex G-2 (Relays) Annex G-3 (Protective devices) Annex G-5 (Wound components) Annex G-7 (Mains power supply cords and interconnection cables) Annex G-8 (Varistors) Annex K-2 (Components of the safety interlock safeguard mechanism) Annex K-6 (Mechanically operated safety interlocks) Annex K-7 (Interlock circuit isolation) Annex M-7 (Risk of explosion from lead acid and NiCd batteries) Annex M-8 (""Protection against internal ignition from external spark sources of rechargeable batteries with aqueous electrolyte"") Annex R (Limited short-circuit test) Annex S-6 (Grille covering material, cloth, and reticulated foam) Annex U (""Mechanical strength of CRTs and protection against the effects of implosion"") Annex Y-2 (Resistance to UV radiation) Annex Y-3 (Resistance to corrosion) Annex Y-4 (Gaskets) Cl-10.1 (General-Radiation) Cl-10.2 (Radiation energy source classifications) Cl-10.3 (Safeguards against laser radiation) Cl-10.4 (""Safeguards against optical radiation from lamps and lamp systems (including LED types)"") Cl-10.5 (Safeguards against X-radiation) Cl-10.6 (Safeguards against acoustic energy sources) 5.4.12 - Insulating Liquids 8.5.5 - High Pressure lamps "

IS 4250 (2025)

Electric Food-Mixers (Liquidizers and Grinders) and Centrifugal Juicers ï¿½ Specification ( Second Revision )

30000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4(General Requirements)	-	1000	-
Cl-5(General Conditions for the tests)	-	1000	-
Cl-6(Classification)	-	1000	-
Cl-7(Marking)	-	1000	-
Cl-8(Safety Requirements)	-	7000	-
Cl-9(Endurance fpr motor and base assembly)	-	1000	-
Cl-10.2("Grinding Coffee (for Machines that Have a Dry Grinding Arrangement)")	-	1000	-
Cl-10.3(Whisking Egg Whites (for Machines that have Whisking Egg Arrangement))	-	1000	-
Cl-10.4(Idli Batter)	-	1000	-
Cl-10.5(Operational Tests for Juicers)	-	2000	-
Cl-11(Temperature Withstand Test for Bowl)	-	1000	-
Cl-12.1(Test for Switches)	-	2000	-
Cl-13(Strength of Assembly)	-	3000	-
Cl-14.2, 14.3 Table-2 (i)(Protection against access to live parts)	-	2000	-
Cl-14.2, Table-2 (ii)(Power input and current)	-	2000	-
Cl-14.2, 14.3 Table-2 (iii)(Leakage current and electric strength at operating temperature)	-	2000	-
Cl-14.2, Table-2 (iv)(Moisture resistance)	-	2000	-
Cl-14.2, Table-2 (v)(Leakage current and electric strength)	-	2000	-
Cl-14.2, 14.3 Table-2 (vi)(Provision for earthing)	-	1000	-

04 Jul, 2027

-
"1 Cl-19.11.4.1 (Electrostatic discharges) Electrostatic discharges Testing facility is too costly to installed. 2 Cl-19.11.4.1 (Electrostatic discharges) Electrostatic discharges Testing facility is too costly to installed. 3 Cl-19.11.4.2 (Radiated fields) Radiated fields Testing facility is too costly to installed. 4 Cl-19.11.4.3 (Fast transient bursts) Fast transient bursts Testing facility is too costly to installed. 5 Cl-19.11.4.4 (Surge immunity test) Surge immunity test Testing facility is too costly to installed. 6 Cl-19.11.4.5 (Immunity to conducted discharges) Immunity to conducted discharges Testing facility is too costly to installed. 7 Cl-19.11.4.6 (Class 3 Voltage dips and interruptions) Class 3 Voltage dips and interruptions Testing facility is too costly to installed. 8 Cl-19.11.4.7 (Harmonics) Harmonics Testing facility is too costly to installed. "

IS 302 : Part 2 : SEC 31 (2009)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 31 range hoods

33000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause No - 5(GENERAL CONDITIONS FOR THE TESTS)	-	2000	-
Clause No - 5.18(linear and angular dimension)	-	2000	-
Clause No - 6.2(harmfull ingress of water)	-	2000	-
Clause No - 8.1.1("PROTECTION AGAINST ACCESS TO LIVE PART- test probe B")	-	2000	-
Clause No - 8.1.2("PROTECTION AGAINST ACCESS TO LIVE PART - test probe 13")	-	2000	-
Clause No - 8.2(Addition)	-	2000	-
Clause No - 10.1, Table No. -1(power input deviation)	-	2000	-
Clause No - 13.3("LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE")	-	2000	-
Clause No - 13.3,Table No.- 4(voltage for electrical strength)	-	2000	-
Clause No - 14(Impulse test voltage)	-	2000	-
Clause No - 15.1.1(MOISTURE RESISTANCE)	-	2000	-
Clause No -19.7(test is repeated with the capacitor short circuited)	-	2000	-
Clause No -21.1(Mechanical strength)	-	2000	-
Clause No -22.1(construction)	-	2000	-
Clause No -22.11(push force applied)	-	2000	-
Clause No -25.8, Table no -11(conductor resistance)	-	2000	-
Clause No -25.5(dimension for pins)	-	2000	-
Clause No -27.6(for circuit board)	-	2000	-
Clause No -29.2(comparative tracking index)	-	2000	-
Clause No -29.3.3(dry heat test)	-	2000	-
Clause No -30.2.1(glow wire test)	-	2000	-
Clause No -30.101("incorporate combustible material")	-	2000	-
15(MOISTURE RESISTANCE)	-	2000	-
16(LEAKAGE CURRENT AND ELECTRIC STRENGTH)	-	2000	-
17(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	2000	-
18(ENDURANCE)	-	2000	-
28(SCREWS AND CONNECTIONS)	-	2000	-
31(RESISTANCE TO RUSTING)	-	2000	-
22(CONSTRUCTION)	-	2000	-
11(Heating)	-	2000	-

04 Jul, 2027

-
Included w.e.f 04.11.2025 Exclusion: Cl 19.11.4.1-19.11.4.7(EMI/EMC), 24 (COMPONENTS), 32 (RADIATION, TOXICITY AND SIMILAR HAZARDS)

IS 996 (2025)

SINGLE PHASE ac INDUCTION MOTORS FOR GENERAL PURPOSE (Fouth Revision)

Up to 1000W

20000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-7(Dimensions)	-	2000	-
Cl-9.1(Mounting)	-	2000	-
Cl-9.2(Terminal Box)	-	2000	-
Cl-9.3(Mounting Constructions)	-	2000	-
Cl-9.3(Mounting Constructions)	-	2000	-
Cl-9.4(Constructional Features)	-	2000	-
Cl-9.5(Earthing)	-	2000	-
Cl-10.1(Enclosures)	-	2000	-
Cl-12.1(Torques)	-	2000	-
Cl-12.1.2(Momentary overload test)	-	2000	-
Cl-12.2(Temperature Rise)	-	2000	-
Cl-12.3(Short Time Rating)	-	2000	-
Cl-12.4(Method of Testing)	-	2000	-
Cl-12.5(Performance Values)	-	2000	-
Cl-12.6(Limits of Vibration Severity)	-	2000	-
Cl-12.7(Insulation Resistance)	-	2000	-
Cl-13.1(High Voltage Values)	-	2000	-
Cl-13.2(Moisture Proofness)	-	2000	-
Cl-13.3(Leakage Current)	-	2000	-
Cl-14(Winding Resistance Measurement)	-	2000	-
Cl-15(REDUCED VOLTAGE RUNNING UP TEST AT NO LOAD)	-	2000	-
Cl-16(NOISE LEVEL)	-	2000	-
Cl-17(OVER SPEED TEST)	-	2000	-
Cl-18(TERMINAL MARKING)	-	2000	-
Cl-12.1.1(Test for torues at rated voltage and frequency)	-	2000	-
Cl-12.1.1(Pull up Torque at rated voltage and frequency)	-	2000	-
Cl-12.1.1(Test for breakaway starting current at rated voltage and frequency)	-	2000	-
Cl-12.1.2(Breakaway (starting) torque at rated voltage and frequency)	-	2000	-
Cl-12.5.1(Test for full-load performance at rated voltage and frequency)	-	2000	-
Cl-21.5(Acceptance Tests)	-	2000	-
Cl-7(Dimensions)	-	2000	-
Cl-9.1(Mounting)	-	2000	-
Cl-9.2(Terminal Box)	-	2000	-
Cl-9.3(Mounting Constructions)	-	2000	-
Cl-9.3(Mounting Constructions)	-	2000	-
Cl-9.4(Constructional Features)	-	2000	-
Cl-9.5(Earthing)	-	2000	-
Cl-10.1(Enclosures)	-	2000	-
Cl-12.1(Torques)	-	2000	-
Cl-12.1.2(Momentary overload test)	-	2000	-
Cl-12.2(Temperature Rise)	-	2000	-
Cl-12.3(Short Time Rating)	-	2000	-
Cl-12.4(Method of Testing)	-	2000	-
Cl-12.5(Performance Values)	-	2000	-
Cl-12.6(Limits of Vibration Severity)	-	2000	-
Cl-12.7(Insulation Resistance)	-	2000	-
Cl-13.1(High Voltage Values)	-	2000	-
Cl-13.2(Moisture Proofness)	-	2000	-
Cl-13.3(Leakage Current)	-	2000	-
Cl-14(Winding Resistance Measurement)	-	2000	-
Cl-15(REDUCED VOLTAGE RUNNING UP TEST AT NO LOAD)	-	2000	-
Cl-16(NOISE LEVEL)	-	2000	-
Cl-17(OVER SPEED TEST)	-	2000	-
Cl-18(TERMINAL MARKING)	-	2000	-
Cl-12.1.1(Test for torues at rated voltage and frequency)	-	2000	-
Cl-12.1.1(Pull up Torque at rated voltage and frequency)	-	2000	-
Cl-12.1.1(Test for breakaway starting current at rated voltage and frequency)	-	2000	-
Cl-12.1.2(Breakaway (starting) torque at rated voltage and frequency)	-	2000	-
Cl-12.5.1(Test for full-load performance at rated voltage and frequency)	-	2000	-
Cl-21.5(Acceptance Tests)	-	2000	-

04 Jul, 2027

-
Included w.e.f. 12.11.2025

IS 302 : Part 2 : Sec 14 (2009)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 14 electric kitchen machines (First Revision)

18000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Classification- IS 302-1 )	-	1000	-
6(Classification- IS 302-1)	-	1000	-
7.1(Marking- IS 302-1)	-	1000	-
7.1(Marking- IS 302-1)	-	1000	-
7.1(Marking- IS 302-1)	-	1000	-
7.1(Marking- IS 302-1)	-	1000	-
7.1(Marking- IS 302-1)	-	1000	-
7.1(Marking- IS 302-1)	-	1000	-
7.1(Marking- IS 302-1)	-	1000	-
7.1(Marking- IS 302-1)	-	1000	-
7.3(Marking- IS 302-1)	-	1000	-
7.4(Marking- IS 302-1)	-	1000	-
7.6(Marking- IS 302-1)	-	1000	-
7.7(Marking- IS 302-1)	-	1000	-
7.8(Marking- IS 302-1)	-	1000	-
7.11(Marking- IS 302-1)	-	1000	-
7.12(Marking- IS 302-1)	-	1000	-
7.13(Marking- IS 302-1)	-	1000	-
7.14(Marking- IS 302-1)	-	1000	-
7.15(Marking- IS 302-1)	-	1000	-
7.101(Marking)	-	1000	-
8( Protection Against Electric Shock, IS 302-1)	-	1000	-
10(Power Input and Current, IS 302-1)	-	1000	-
11(Heating, IS 302-1)	-	1000	-
11(Heating, IS 302-1)	-	1000	-
11(Heating, IS 302-1)	-	1000	-
11(Heating, IS 302-1)	-	1000	-
11(Heating, IS 302-1)	-	1000	-
13(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	1000	-
13(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	1000	-
14(Transient Over Voltages, IS 302-1)	-	1000	-
15.1(Moisture Resistance, IS 302-1)	-	1000	-
15.2(Moisture Resistance, IS 302-1)	-	1000	-
15(Moisture Resistance, IS 302-1)	-	1000	-
16(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	1000	-
16(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	1000	-
17(Overload protection of Transformers and Associated Circuits, IS 302-1)	-	1000	-
17(Overload protection of Transformers and Associated Circuits, IS 302-1)	-	1000	-
19.7(Abnormal Operation, IS 302-1)	-	1000	-
19.8(Abnormal Operation, IS 302-1)	-	1000	-
19.9(Abnormal Operation, IS 302-1)	-	1000	-
19.1(Abnormal Operation, IS 302-1)	-	1000	-
19.101(Abnormal Operation)	-	1000	-
19.102(Abnormal Operation)	-	1000	-
20.1(Stability & Mechanical Hazards, IS 302-1)	-	1000	-
20.2(Stability & Mechanical Hazards, IS 302-1)	-	1000	-
20.101(Stability & Mechanical Hazards)	-	1000	-
20.102(Stability & Mechanical Hazards)	-	1000	-
20.103(Stability & Mechanical Hazards)	-	1000	-
20.104(Stability & Mechanical Hazards)	-	1000	-
20.105(Stability & Mechanical Hazards)	-	1000	-
20.106(Stability & Mechanical Hazards)	-	1000	-
20.107(Stability & Mechanical Hazards)	-	1000	-
20.108(Stability & Mechanical Hazards)	-	1000	-
20.109(Stability & Mechanical Hazards)	-	1000	-
20.110(Stability & Mechanical Hazards)	-	1000	-
20.111(Stability & Mechanical Hazards)	-	1000	-
20.112(Stability & Mechanical Hazards)	-	1000	-
20.113(Stability & Mechanical Hazards)	-	1000	-
20.114(Stability & Mechanical Hazards)	-	1000	-
20.115(Stability & Mechanical Hazards)	-	1000	-
20.116(Stability & Mechanical Hazards)	-	1000	-
21.1(Mechanical Strength, IS 302-1)	-	1000	-
21.2(Mechanical Strength, IS 302-1)	-	1000	-
22(Construction, IS 302-1)	-	1000	-
22.101(Construction)	-	1000	-
22.102(Construction)	-	1000	-
23.1(Internal Wiring, IS 302-1)	-	1000	-
23.2(Internal Wiring, IS 302-1)	-	1000	-
23.3(Internal Wiring, IS 302-1)	-	1000	-
23.4(Internal Wiring, IS 302-1)	-	1000	-
23.5(Internal Wiring, IS 302-1)	-	1000	-
23.6(Internal Wiring, IS 302-1)	-	1000	-
23.7(Internal Wiring, IS 302-1)	-	1000	-
23.8(Internal Wiring, IS 302-1)	-	1000	-
23.9(Internal Wiring, IS 302-1)	-	1000	-
23.10(Internal Wiring, IS 302-1)	-	1000	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.5(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.6(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.7(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
26.9(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.11(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.12(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.13(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.16(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.17(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.18(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.19(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.2(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.21(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.22(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
26(Terminals for External Conductors, IS 302-1)	-	1000	-
27(Provision for Earthing, IS 302-1)	-	1000	-
27.2(Provision for Earthing, IS 302-1)	-	1000	-
27.3(Provision for Earthing, IS 302-1)	-	1000	-
27.4(Provision for Earthing, IS 302-1)	-	1000	-
27.5(Provision for Earthing, IS 302-1)	-	1000	-
28(Screws & Connections, IS 302-1)	-	1000	-
29.1(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	1000	-
29.2(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	1000	-
30.1(Resistance to Heat and Fire, IS 302-1)	-	1000	-
30.2(Resistance to Heat and Fire, IS 302-1)	-	1000	-
31(Resistance of Rusting, IS 302-1)	-	1000	-
4(GENERAL REQUIREMENTS)	-	1000	-
5(GENERAL CONDITIONS FOR THE TESTS)	-	1000	-
27(Provision for Earthing)	-	1000	-
29(Clearances, Creepage distances and Solid Insulation)	-	1000	-
6(Classification- IS 302-1 )	-	1000	-
6(Classification- IS 302-1)	-	1000	-
7.1(Marking- IS 302-1)	-	1000	-
7.1(Marking- IS 302-1)	-	1000	-
7.1(Marking- IS 302-1)	-	1000	-
7.1(Marking- IS 302-1)	-	1000	-
7.1(Marking- IS 302-1)	-	1000	-
7.1(Marking- IS 302-1)	-	1000	-
7.1(Marking- IS 302-1)	-	1000	-
7.1(Marking- IS 302-1)	-	1000	-
7.3(Marking- IS 302-1)	-	1000	-
7.4(Marking- IS 302-1)	-	1000	-
7.6(Marking- IS 302-1)	-	1000	-
7.7(Marking- IS 302-1)	-	1000	-
7.8(Marking- IS 302-1)	-	1000	-
7.11(Marking- IS 302-1)	-	1000	-
7.12(Marking- IS 302-1)	-	1000	-
7.13(Marking- IS 302-1)	-	1000	-
7.14(Marking- IS 302-1)	-	1000	-
7.15(Marking- IS 302-1)	-	1000	-
7.101(Marking)	-	1000	-
8( Protection Against Electric Shock, IS 302-1)	-	1000	-
10(Power Input and Current, IS 302-1)	-	1000	-
11(Heating, IS 302-1)	-	1000	-
11(Heating, IS 302-1)	-	1000	-
11(Heating, IS 302-1)	-	1000	-
11(Heating, IS 302-1)	-	1000	-
11(Heating, IS 302-1)	-	1000	-
13(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	1000	-
13(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	1000	-
14(Transient Over Voltages, IS 302-1)	-	1000	-
15.1(Moisture Resistance, IS 302-1)	-	1000	-
15.2(Moisture Resistance, IS 302-1)	-	1000	-
15(Moisture Resistance, IS 302-1)	-	1000	-
16(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	1000	-
16(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	1000	-
17(Overload protection of Transformers and Associated Circuits, IS 302-1)	-	1000	-
17(Overload protection of Transformers and Associated Circuits, IS 302-1)	-	1000	-
19.7(Abnormal Operation, IS 302-1)	-	1000	-
19.8(Abnormal Operation, IS 302-1)	-	1000	-
19.9(Abnormal Operation, IS 302-1)	-	1000	-
19.1(Abnormal Operation, IS 302-1)	-	1000	-
19.101(Abnormal Operation)	-	1000	-
19.102(Abnormal Operation)	-	1000	-
20.1(Stability & Mechanical Hazards, IS 302-1)	-	1000	-
20.2(Stability & Mechanical Hazards, IS 302-1)	-	1000	-
20.101(Stability & Mechanical Hazards)	-	1000	-
20.102(Stability & Mechanical Hazards)	-	1000	-
20.103(Stability & Mechanical Hazards)	-	1000	-
20.104(Stability & Mechanical Hazards)	-	1000	-
20.105(Stability & Mechanical Hazards)	-	1000	-
20.106(Stability & Mechanical Hazards)	-	1000	-
20.107(Stability & Mechanical Hazards)	-	1000	-
20.108(Stability & Mechanical Hazards)	-	1000	-
20.109(Stability & Mechanical Hazards)	-	1000	-
20.110(Stability & Mechanical Hazards)	-	1000	-
20.111(Stability & Mechanical Hazards)	-	1000	-
20.112(Stability & Mechanical Hazards)	-	1000	-
20.113(Stability & Mechanical Hazards)	-	1000	-
20.114(Stability & Mechanical Hazards)	-	1000	-
20.115(Stability & Mechanical Hazards)	-	1000	-
20.116(Stability & Mechanical Hazards)	-	1000	-
21.1(Mechanical Strength, IS 302-1)	-	1000	-
21.2(Mechanical Strength, IS 302-1)	-	1000	-
22(Construction, IS 302-1)	-	1000	-
22.101(Construction)	-	1000	-
22.102(Construction)	-	1000	-
23.1(Internal Wiring, IS 302-1)	-	1000	-
23.2(Internal Wiring, IS 302-1)	-	1000	-
23.3(Internal Wiring, IS 302-1)	-	1000	-
23.4(Internal Wiring, IS 302-1)	-	1000	-
23.5(Internal Wiring, IS 302-1)	-	1000	-
23.6(Internal Wiring, IS 302-1)	-	1000	-
23.7(Internal Wiring, IS 302-1)	-	1000	-
23.8(Internal Wiring, IS 302-1)	-	1000	-
23.9(Internal Wiring, IS 302-1)	-	1000	-
23.10(Internal Wiring, IS 302-1)	-	1000	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.5(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.6(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.7(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
26.9(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.11(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.12(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.13(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.16(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.17(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.18(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.19(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.2(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.21(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.22(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
26(Terminals for External Conductors, IS 302-1)	-	1000	-
27(Provision for Earthing, IS 302-1)	-	1000	-
27.2(Provision for Earthing, IS 302-1)	-	1000	-
27.3(Provision for Earthing, IS 302-1)	-	1000	-
27.4(Provision for Earthing, IS 302-1)	-	1000	-
27.5(Provision for Earthing, IS 302-1)	-	1000	-
28(Screws & Connections, IS 302-1)	-	1000	-
29.1(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	1000	-
29.2(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	1000	-
30.1(Resistance to Heat and Fire, IS 302-1)	-	1000	-
30.2(Resistance to Heat and Fire, IS 302-1)	-	1000	-
31(Resistance of Rusting, IS 302-1)	-	1000	-
4(GENERAL REQUIREMENTS)	-	1000	-
5(GENERAL CONDITIONS FOR THE TESTS)	-	1000	-
27(Provision for Earthing)	-	1000	-
29(Clearances, Creepage distances and Solid Insulation)	-	1000	-

04 Jul, 2027

-
Included w.e.f 13.11.2025 Exclusion: Cl-19.11.4.1-Cl-19.11.4.7(EMI/EMC),Cl-24 (Components), Cl-32 (Radiation, toxicity and similar hazards)

IS 302 : Part 2 : Sec 3 (2024)

Household and Similar Electrical Appliances âSafety Part 2 Particular Requirements Section 3 Electric Irons (Second Revision)

18000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4(General requirement)	-	1500	-
Cl-7(Marking and instructions)	-	1500	-
Cl-8(Protection against access to live parts)	-	1500	-
Cl-10(Power input and current)	-	1500	-
Cl-11(Heating)	-	1500	-
Cl-12(Charging of metal-ion batteries)	-	1500	-
Cl-13(Leakage current and electric strength at operating temperature)	-	1500	-
Cl-14(Transient overvoltages)	-	1500	-
Cl-15(Moisture resistance)	-	1500	-
Cl-16(Leakage current and electric strength)	-	1500	-
Cl-17(Overload protection of transformers and associated circuits)	-	1500	-
Cl-18(Endurance)	-	1500	-
Cl-19(Abnormal operation)	-	1500	-
Cl-20(Stability and mechanical hazards)	-	1500	-
Cl-21(Mechanical strength)	-	1500	-
Cl-22(Construction)	-	1500	-
Cl-23(Internal wiring)	-	1500	-
Cl-25(Supply connection and external flexible cords)	-	1500	-
Cl-26(Terminals for external conductors)	-	1500	-
Cl-27(Provision for earthing)	-	1500	-
Cl-28(Screws and connections)	-	1500	-
Cl-29(Clearances, creepage distances and solid insulation)	-	1500	-
Cl-30(Resistance to heat and fire)	-	1500	-
Cl-31(Resistance to rusting)	-	1500	-
Cl-4(General requirement)	-	1500	-
Cl-7(Marking and instructions)	-	1500	-
Cl-8(Protection against access to live parts)	-	1500	-
Cl-10(Power input and current)	-	1500	-
Cl-11(Heating)	-	1500	-
Cl-12(Charging of metal-ion batteries)	-	1500	-
Cl-13(Leakage current and electric strength at operating temperature)	-	1500	-
Cl-14(Transient overvoltages)	-	1500	-
Cl-15(Moisture resistance)	-	1500	-
Cl-16(Leakage current and electric strength)	-	1500	-
Cl-17(Overload protection of transformers and associated circuits)	-	1500	-
Cl-18(Endurance)	-	1500	-
Cl-19(Abnormal operation)	-	1500	-
Cl-20(Stability and mechanical hazards)	-	1500	-
Cl-21(Mechanical strength)	-	1500	-
Cl-22(Construction)	-	1500	-
Cl-23(Internal wiring)	-	1500	-
Cl-25(Supply connection and external flexible cords)	-	1500	-
Cl-26(Terminals for external conductors)	-	1500	-
Cl-27(Provision for earthing)	-	1500	-
Cl-28(Screws and connections)	-	1500	-
Cl-29(Clearances, creepage distances and solid insulation)	-	1500	-
Cl-30(Resistance to heat and fire)	-	1500	-
Cl-31(Resistance to rusting)	-	1500	-
Cl-4(General requirement)	-	1500	-
Cl-7(Marking and instructions)	-	1500	-
Cl-8(Protection against access to live parts)	-	1500	-
Cl-10(Power input and current)	-	1500	-
Cl-11(Heating)	-	1500	-
Cl-12(Charging of metal-ion batteries)	-	1500	-
Cl-13(Leakage current and electric strength at operating temperature)	-	1500	-
Cl-14(Transient overvoltages)	-	1500	-
Cl-15(Moisture resistance)	-	1500	-
Cl-16(Leakage current and electric strength)	-	1500	-
Cl-17(Overload protection of transformers and associated circuits)	-	1500	-
Cl-18(Endurance)	-	1500	-
Cl-19(Abnormal operation)	-	1500	-
Cl-20(Stability and mechanical hazards)	-	1500	-
Cl-21(Mechanical strength)	-	1500	-
Cl-22(Construction)	-	1500	-
Cl-23(Internal wiring)	-	1500	-
Cl-25(Supply connection and external flexible cords)	-	1500	-
Cl-26(Terminals for external conductors)	-	1500	-
Cl-27(Provision for earthing)	-	1500	-
Cl-28(Screws and connections)	-	1500	-
Cl-29(Clearances, creepage distances and solid insulation)	-	1500	-
Cl-30(Resistance to heat and fire)	-	1500	-
Cl-31(Resistance to rusting)	-	1500	-

04 Jul, 2027

-
Included w.e.f 05.12.2025 Exclusion: Cl-24 (Components), Cl-32 (Radiation, toxicity and similar hazards), Cl-19.11.4.1 to Cl-19.11.4.7 (EMI/EMC)

IS 366 (1991)

Electric iron - Specification (Fourth Revision)

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.0(Classification (as per Cl.6 of IS 302-2-3 and Cl.6.1 of IS 302-1))	-	1000	-
7.0(Classification (as per Cl.6 of IS 302-2-3 and Cl.6.2 of IS 302-1))	-	1000	-
9.0(Protection against access to live parts (as per Cl. 8 of IS 302-2-3 and IS 302-1))	-	1000	-
9.0(Power input and current (as per Cl. 10 of IS 302-2-3 and IS 302-1))	-	1000	-
9.0(Temperature Rise (as per Cl. 11 of IS 302-2-3 and IS 302-1))	-	1000	-
9.0(Temperature Rise (as per Cl. 11 of IS 302-2-3 and IS 302-1))	-	1000	-
9.0(Temperature Rise (as per Cl. 11 of IS 302-2-3 and IS 302-1))	-	1000	-
9.0(Temperature Rise (as per Cl. 11 of IS 302-2-3 and IS 302-1))	-	1000	-
9.0(Leakage current and Electric Strength at Operating Temperature (as per Cl. 13 of IS 302-2-3 and IS 302-1))	-	1000	-
9.0(Leakage current and Electric Strength at Operating Temperature (as per Cl. 13 of IS 302-2-3 and IS 302-1))	-	1000	-
9.0(Transient Overvoltage (as per of Cl. 14 of IS 302-2-3 and Table 6 of IS 302-1))	-	1000	-
9.0(Moisture Resistance (as per of Cl.15 of IS 302-2-3 and IS 302-1))	-	1000	-
9.0(Moisture Resistance (as per of Cl.15 of IS 302-2-3 and IS 302-1))	-	1000	-
9.0(Abnormal Operation (as per of Cl.19 of IS 302-2-3 and IS 302-1) )	-	1000	-
9.0(Abnormal Operation (as per of Cl.19 of IS 302-2-3 and IS 302-1) )	-	1000	-
9.0(Abnormal Operation (as per of Cl.19 of IS 302-2-3 and IS 302-1) )	-	1000	-
9.0(Abnormal Operation (as per of Cl.19 of IS 302-2-3 and IS 302-1) )	-	1000	-
9.0(Staibilty and mechanical hazards (as per of Cl.20 of IS 302-2-3 and IS 302-1) )	-	1000	-
9.0(Mechanical strength (as per of Cl.21 of IS 302-2-3 and IS 302-1) )	-	1000	-
9.0(Construction (as per of Cl.22 of IS 302-2-3 and IS 302-1) )	-	1000	-
9.0(Construction (as per of Cl.22 of IS 302-2-3 and IS 302-1) )	-	1000	-
9.0(Construction (as per of Cl.22 of IS 302-2-3 and IS 302-1) )	-	1000	-
9.0(Construction (as per of Cl.22 of IS 302-2-3 and IS 302-1) )	-	1000	-
9.0(Construction (as per of Cl.22 of IS 302-2-3 and IS 302-1) )	-	1000	-
9.0(Construction (as per of Cl.22 of IS 302-2-3 and IS 302-1) )	-	1000	-
9.0(Construction (as per of Cl.22 of IS 302-2-3 and IS 302-1) )	-	1000	-
9.0(Internal wiring (as per of Cl.23 of IS 302-2-3 and IS 302-1) )	-	1000	-
9.0(Internal wiring (as per of Cl.23 of IS 302-2-3 and IS 302-1) )	-	1000	-
9.0(Internal wiring (as per of Cl.23 of IS 302-2-3 and IS 302-1) )	-	1000	-
9.0(Internal wiring (as per of Cl.23 of IS 302-2-3 and IS 302-1) )	-	1000	-
9.0(Supply connection and external flexible cord (as per of Cl.25 of IS 302-2-3 and IS 302-1) )	-	1000	-
9.0(Supply connection and external flexible cord (as per of Cl.25 of IS 302-2-3 and IS 302-1) )	-	1000	-
9.0(Supply connection and external flexible cord (as per of Cl.25 of IS 302-2-3 and IS 302-1) )	-	1000	-
9.0(Supply connection and external flexible cord (as per of Cl.25 of IS 302-2-3 and IS 302-1) )	-	1000	-
9.0(Supply connection and external flexible cord (as per of Cl.25 of IS 302-2-3 and IS 302-1) )	-	1000	-
9.0(Terminals for external conductors (as per of Cl.26 of IS 302-2-3 and IS 302-1) )	-	1000	-
9.0(Provision for earthing (as per of Cl.27 of IS 302-2-3 and IS 302-1) )	-	1000	-
9.0(Provision for earthing (as per of Cl.27 of IS 302-2-3 and IS 302-1) )	-	1000	-
9.0(Provision for earthing (as per of Cl.27 of IS 302-2-3 and IS 302-1) )	-	1000	-
9.0(Provision for earthing (as per of Cl.27 of IS 302-2-3 and IS 302-1) )	-	1000	-
9.0(Screw and connections (as per of Cl.28 of IS 302-2-3 and IS 302-1))	-	1000	-
9.0(Screw and connections (as per of Cl.28 of IS 302-2-3 and IS 302-1))	-	1000	-
9.0(Clearances, creepage distances and solid insulation (as per of Cl.29 of IS 302-2-3 and IS 302-1))	-	1000	-
9.0(Clearances, creepage distances and solid insulation (as per of Cl.29 of IS 302-2-3 and IS 302-1))	-	1000	-
9.0(Resistance to Heat and Fire (as per of Cl.30 of IS 302-2-3 and IS 302-1))	-	1000	-
9.0(Resistance to Rusting (as per of Cl.31 of IS 302-2-3 and IS 302-1))	-	1000	-
10.0(Measurement of Heating up time)	-	1000	-
10.0(Measurement of Heating up time)	-	1000	-
11.0(Measurement of sole plate temperature)	-	1000	-
11.0(Measurement of sole plate temperature)	-	1000	-
11.0(Measurement of sole plate temperature)	-	1000	-
11.0(Measurement of sole plate temperature)	-	1000	-
12.0(Measurement of Tempearture Distribution)	-	1000	-
13.0(Measurement of Initial overswing temperature and Heating up excess temperature)	-	1000	-
13.0(Measurement of Initial overswing temperature and Heating up excess temperature)	-	1000	-
14.0(Measurement of Cyclic fluctuation of temperature of hottest point )	-	1000	-
16.0(Measurement of Thermostatic staibility)	-	1000	-
16.0(Measurement of Thermostatic staibility)	-	1000	-
16.0(Measurement of Thermostatic staibility)	-	1000	-
16.0(Measurement of Thermostatic staibility)	-	1000	-
16.0(Measurement of Thermostatic staibility)	-	1000	-
16.0(Measurement of Thermostatic staibility)	-	1000	-
7.0(Classification (as per Cl.6 of IS 302-2-3 and Cl.6.1 of IS 302-1))	-	1000	-
7.0(Classification (as per Cl.6 of IS 302-2-3 and Cl.6.2 of IS 302-1))	-	1000	-
9.0(Protection against access to live parts (as per Cl. 8 of IS 302-2-3 and IS 302-1))	-	1000	-
9.0(Power input and current (as per Cl. 10 of IS 302-2-3 and IS 302-1))	-	1000	-
9.0(Temperature Rise (as per Cl. 11 of IS 302-2-3 and IS 302-1))	-	1000	-
9.0(Temperature Rise (as per Cl. 11 of IS 302-2-3 and IS 302-1))	-	1000	-
9.0(Temperature Rise (as per Cl. 11 of IS 302-2-3 and IS 302-1))	-	1000	-
9.0(Temperature Rise (as per Cl. 11 of IS 302-2-3 and IS 302-1))	-	1000	-
9.0(Leakage current and Electric Strength at Operating Temperature (as per Cl. 13 of IS 302-2-3 and IS 302-1))	-	1000	-
9.0(Leakage current and Electric Strength at Operating Temperature (as per Cl. 13 of IS 302-2-3 and IS 302-1))	-	1000	-
9.0(Transient Overvoltage (as per of Cl. 14 of IS 302-2-3 and Table 6 of IS 302-1))	-	1000	-
9.0(Moisture Resistance (as per of Cl.15 of IS 302-2-3 and IS 302-1))	-	1000	-
9.0(Moisture Resistance (as per of Cl.15 of IS 302-2-3 and IS 302-1))	-	1000	-
9.0(Abnormal Operation (as per of Cl.19 of IS 302-2-3 and IS 302-1) )	-	1000	-
9.0(Abnormal Operation (as per of Cl.19 of IS 302-2-3 and IS 302-1) )	-	1000	-
9.0(Abnormal Operation (as per of Cl.19 of IS 302-2-3 and IS 302-1) )	-	1000	-
9.0(Abnormal Operation (as per of Cl.19 of IS 302-2-3 and IS 302-1) )	-	1000	-
9.0(Abnormal Operation (as per of Cl.19 of IS 302-2-3 and IS 302-1) )	-	1000	-
9.0(Staibilty and mechanical hazards (as per of Cl.20 of IS 302-2-3 and IS 302-1) )	-	1000	-
9.0(Mechanical strength (as per of Cl.21 of IS 302-2-3 and IS 302-1) )	-	1000	-
9.0(Construction (as per of Cl.22 of IS 302-2-3 and IS 302-1) )	-	1000	-
9.0(Construction (as per of Cl.22 of IS 302-2-3 and IS 302-1) )	-	1000	-
9.0(Construction (as per of Cl.22 of IS 302-2-3 and IS 302-1) )	-	1000	-
9.0(Construction (as per of Cl.22 of IS 302-2-3 and IS 302-1) )	-	1000	-
9.0(Construction (as per of Cl.22 of IS 302-2-3 and IS 302-1) )	-	1000	-
9.0(Construction (as per of Cl.22 of IS 302-2-3 and IS 302-1) )	-	1000	-
9.0(Construction (as per of Cl.22 of IS 302-2-3 and IS 302-1) )	-	1000	-
9.0(Internal wiring (as per of Cl.23 of IS 302-2-3 and IS 302-1) )	-	1000	-
9.0(Internal wiring (as per of Cl.23 of IS 302-2-3 and IS 302-1) )	-	1000	-
9.0(Internal wiring (as per of Cl.23 of IS 302-2-3 and IS 302-1) )	-	1000	-
9.0(Internal wiring (as per of Cl.23 of IS 302-2-3 and IS 302-1) )	-	1000	-
9.0(Supply connection and external flexible cord (as per of Cl.25 of IS 302-2-3 and IS 302-1) )	-	1000	-
9.0(Supply connection and external flexible cord (as per of Cl.25 of IS 302-2-3 and IS 302-1) )	-	1000	-
9.0(Supply connection and external flexible cord (as per of Cl.25 of IS 302-2-3 and IS 302-1) )	-	1000	-
9.0(Supply connection and external flexible cord (as per of Cl.25 of IS 302-2-3 and IS 302-1) )	-	1000	-
9.0(Supply connection and external flexible cord (as per of Cl.25 of IS 302-2-3 and IS 302-1) )	-	1000	-
9.0(Terminals for external conductors (as per of Cl.26 of IS 302-2-3 and IS 302-1) )	-	1000	-
9.0(Provision for earthing (as per of Cl.27 of IS 302-2-3 and IS 302-1) )	-	1000	-
9.0(Provision for earthing (as per of Cl.27 of IS 302-2-3 and IS 302-1) )	-	1000	-
9.0(Provision for earthing (as per of Cl.27 of IS 302-2-3 and IS 302-1) )	-	1000	-
9.0(Provision for earthing (as per of Cl.27 of IS 302-2-3 and IS 302-1) )	-	1000	-
9.0(Screw and connections (as per of Cl.28 of IS 302-2-3 and IS 302-1))	-	1000	-
9.0(Screw and connections (as per of Cl.28 of IS 302-2-3 and IS 302-1))	-	1000	-
9.0(Clearances, creepage distances and solid insulation (as per of Cl.29 of IS 302-2-3 and IS 302-1))	-	1000	-
9.0(Clearances, creepage distances and solid insulation (as per of Cl.29 of IS 302-2-3 and IS 302-1))	-	1000	-
9.0(Resistance to Heat and Fire (as per of Cl.30 of IS 302-2-3 and IS 302-1))	-	1000	-
9.0(Resistance to Rusting (as per of Cl.31 of IS 302-2-3 and IS 302-1))	-	1000	-
10.0(Measurement of Heating up time)	-	1000	-
10.0(Measurement of Heating up time)	-	1000	-
11.0(Measurement of sole plate temperature)	-	1000	-
11.0(Measurement of sole plate temperature)	-	1000	-
11.0(Measurement of sole plate temperature)	-	1000	-
11.0(Measurement of sole plate temperature)	-	1000	-
12.0(Measurement of Tempearture Distribution)	-	1000	-
13.0(Measurement of Initial overswing temperature and Heating up excess temperature)	-	1000	-
13.0(Measurement of Initial overswing temperature and Heating up excess temperature)	-	1000	-
14.0(Measurement of Cyclic fluctuation of temperature of hottest point )	-	1000	-
16.0(Measurement of Thermostatic staibility)	-	1000	-
16.0(Measurement of Thermostatic staibility)	-	1000	-
16.0(Measurement of Thermostatic staibility)	-	1000	-
16.0(Measurement of Thermostatic staibility)	-	1000	-
16.0(Measurement of Thermostatic staibility)	-	1000	-
16.0(Measurement of Thermostatic staibility)	-	1000	-
6(Measurement of Thermostatic staibility)	-	1000	-
15(MEASUREMENT OF TEMPERATURE DROP UNDER LOAD)	-	1000	-
17(Measurement of Thermostatic staibility)	-	1000	-
16 of IS 302-2-3(Leakage current electric strength)	-	1000	-
4(GENERAL REQUIREMENTS)	-	1000	-
5(GENERAL NOTES ON TESTS)	-	1000	-
8(Marking)	-	1000	-
(Cl.8 of IS 366:1991 )(Marking and Instructions)	-	1000	-
(Cl.8 of IS 366:1991 )(Marking and Instructions)	-	1000	-
(Cl.8 of IS 366:1991 )(Marking and Instructions)	-	1000	-
(Cl.8 of IS 366:1991 )(Marking and Instructions)	-	1000	-
(Cl.22 of IS 302-2-3 :2007)(Construction)	-	1000	-
(Cl.22 of IS 302-2-3 :2007)(Construction)	-	1000	-
(Cl.11 of IS 302-2-3 :2007)(Heating)	-	1000	-

04 Jul, 2027

-
"1 (Cl.32 of IS 302-2-3 :2007) (Radiation, Toxicity and similar) Radiation, toxicity and similar hazards Chamber not available 2 9.0 (Abnormal Operation (as per of Cl.19 of IS 302-2-3 and IS 302-1) ) Abnormal Operation Chamber not available (Electrostatic discharge, Radiation, Fast Transient Burst, Surge, Impulse) Clause.No 19.11.4 (Clause. No 19.11.4.1 to Clause. No 19.11.4.8) 3 9.0 (Components (as per of Cl.24 of IS 302-2-3 and IS 302-1) ) Component Always certified components used 4 9.0 (Components (as per of Cl.24 of IS 302-2-3 and IS 302-1) ) Component Always certified components used".

IS 4159 (2021)

Mineral Filled Sheathed Heating Elements

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
"Cl. 6 IS 4159:2021"(Classification)	-	1000	-
"Cl. 8 IS 4159:2021"(Protection against access to live parts)	-	1000	-
"Cl. 9 IS 4159:2021"(Starting of motor operated appliances)	-	1000	-
"Cl. 10 IS 4159:2021"(Power Input and Current)	-	1000	-
"Cl. 11 IS 4159:2021"(Heating)	-	1000	-
"Cl. 13 IS 4159:2021"(Leakage Current & Electrical Strength at Operating Temperature)	-	1000	-
"Cl. 14 IS 4159:2021"(Transient Over Voltage)	-	1000	-
"Cl. 15 IS 4159:2021"(Moisture Resistance)	-	1000	-
"Cl. 16 IS 4159:2021"(Leakage Current and Electric strength)	-	1000	-
"Cl. 17 IS 4159:2021"(Overload protection of transformers and associated circuits.)	-	1000	-
"Cl. 18 IS 4159:2021"(Endurance)	-	1000	-
"Cl. 19 IS 4159:2021"(Abnormal Operation)	-	1000	-
"Cl. 20 IS 4159:2021"(Stability and mechanical Hazards)	-	1000	-
"Cl. 21 IS 4159:2021"(Mechanical Strength)	-	1000	-
"Cl. 22 IS 4159:2021"(Construction)	-	1000	-
"Cl. 23 IS 4159:2021"(Internal Wiring)	-	1000	-
"Cl. 25 IS 4159:2021"(Supply Connections and External Flexible Cables and Cords)	-	1000	-
"Cl. 26 IS 4159:2021"(Terminal For External Conductors)	-	1000	-
"Cl. 27 IS 4159:2021"(Provision For Earthing)	-	1000	-
"Cl. 28 IS 4159:2021"(Screws and Connections)	-	1000	-
"Cl. 29 IS 4159:2021"(Creepage Distances, Clearances And Distances Through Insulation)	-	1000	-
"Cl. 30 IS 4159:2021"(Resistance To Heat, Fire And Tracking)	-	1000	-
"Cl. 31 IS 4159:2021"(Resistance To Rusting)	-	1000	-
Cl.22.106(CONSTRUCTION)	-	1000	-
Cl.7.1 of IS 4159:2021(Marking)	-	1000	-
Cl.7.1 of IS 4159:2021(Marking)	-	1000	-
Cl.7.1 of IS 4159:2021(Marking)	-	1000	-
Cl.7.1 of IS 4159:2021(Marking)	-	1000	-
Cl.7.1 of IS 4159:2021(Marking)	-	1000	-
Cl.7.1 of IS 4159:2021(Marking)	-	1000	-
Cl.7.2 of IS 4159:2021(Marking)	-	1000	-
Cl.7.3 of IS 4159:2021(Marking)	-	1000	-
Cl.10 of IS 302-1:2008(Power Input & Current)	-	1000	-
Cl.11 of IS 4159:2021 & IS 302‐1:2008(Heating)	-	1000	-
Cl.11 of IS 4159:2021 & IS 302‐1:2008(Heating)	-	1000	-
Cl.11.2 of IS 4159:2021(Heating)	-	1000	-
Cl.11.101 of IS 4159:2021(Heating)	-	1000	-
Cl.18 of IS 4159:2021(Endurance Test)	-	1000	-
Cl.19.2 of IS 302-1: 2008(Abnormal Operation)	-	1000	-
Cl.19.3 of IS 302-1: 2008(Abnormal Operation)	-	1000	-
Cl.19.13 IS 302-1: 2008(Abnormal Operation)	-	1000	-
Cl.19.13 IS 302-1: 2008(Abnormal Operation)	-	1000	-
Cl.19.13 IS 302-1: 2008(Abnormal Operation)	-	1000	-
Cl.22.101 of IS 4159:2021(Construction)	-	1000	-
Cl.22.102 of IS 4159:2021(Construction)	-	1000	-
Cl.22.103 of IS 4159:2021(Construction)	-	1000	-
Cl.22.104 of IS 4159:2021(Construction)	-	1000	-
Cl.22.105 of IS 4159:2021(Construction)	-	1000	-
Cl.22.106 of IS 4159:2021(Construction)	-	1000	-
Cl.22.107 of IS 4159:2021(Construction)	-	1000	-
Cl.22.108 of IS 4159:2021(Construction)	-	1000	-
Cl.22.109 of IS 4159:2021(Construction)	-	1000	-
Cl.22.110 of IS 4159:2021(Construction)	-	1000	-
Cl.22.111 of IS 4159:2021(Construction)	-	1000	-
Cl.27 & IS 302-1: 2008(Provision for Earthing)	-	1000	-
Cl.27 & IS 302-1: 2008(Provision for Earthing)	-	1000	-
Cl.28.1 & IS 302-1: 2008(Screws & Connection)	-	1000	-
Cl.28.4 IS 302-1: 2008(Screws & Connection)	-	1000	-
Cl. 29.1 & IS 302-1: 2008(Creepage Distances & Clearances)	-	1000	-
Cl. 29.2 & IS 302-1: 2009(Creepage Distances & Clearances)	-	1000	-

04 Jul, 2027

-
Included w.e.f. 11.11.2025 Exclusion: """Cl. 102 IS 4159:2021"" (Leakage and hydrostatic strength (for oil heating elements)) ""Cl. 24 IS 4159:2021"" (Components) 19.11.4.1 (Electrostatic discharges) 19.11.4.2 (Radiated fields) 19.11.4.3 (Fast transient bursts) 19.11.4.4 (Surge immunity test) 19.11.4.5 (Immunity to conducted discharges) 19.11.4.6 (Class 3 Voltage dips and interruptions) 19.11.4.7 (Harmonics) "

IS 4246 (2025)

DOMESTIC GAS STOVE AND BUILT IN HOB FOR USE WITH LPG SPECIFICATION (Sixth Revision )

18000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(General - IS 4246 : 2025)	-	200	-
4.1(General - IS 4246 : 2025)	-	200	-
4.1.1(General - IS 4246 : 2025)	-	200	-
5(Materials - Cl. 5 of IS 5116)	-	500	-
5.1.1(Materials - Toughened glass, if provided,)	-	500	-
5.1.1(Materials - Toughened glass, if provided,)	-	500	-
5.1.1(Materials - Toughened glass, if provided,)	-	500	-
5.1.1(Materials - Toughened glass, if provided,)	-	500	-
5.1.1(Materials - Toughened glass, if provided,)	-	500	-
5.1.1(Materials - Toughened glass, if provided,)	-	500	-
5.1.1(Materials - Toughened glass, if provided,)	-	500	-
5.1.1(Materials - Toughened glass, if provided,)	-	500	-
5.1.1(Materials - Toughened glass, if provided,)	-	500	-
5.1(Materials - IS 5116)	-	500	-
5.1(Materials - IS 5116)	-	500	-
5.1.1(Materials - IS 5116)	-	500	-
5.1.1(Materials - IS 5116)	-	500	-
5.2(Materials - IS 5116)	-	500	-
5.2(Materials - IS 5116)	-	500	-
5.3(Materials - IS 5116)	-	500	-
5.5(Materials - IS 5116)	-	500	-
5.5(Materials - IS 5116)	-	500	-
5.5(Materials - IS 5116)	-	500	-
5.7(Materials - IS 5116)	-	500	-
6.1(Design for Maintainance)	-	50	-
6.1(Design for Maintainance)	-	50	-
6.2(Design for Maintainance)	-	50	-
6.2(Design for Maintainance)	-	50	-
6.3(Design for Maintainance)	-	50	-
6.4(Design for Maintainance)	-	50	-
6.5(Design for Maintainance)	-	50	-
6.6(Design for Maintainance)	-	50	-
7.0(Rigidity and Stability)	-	50	-
7.1(Rigidity and Stability)	-	50	-
7.2(Rigidity and Stability)	-	50	-
7.3(Rigidity and Stability)	-	50	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	100	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	100	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	100	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	100	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	100	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	100	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	100	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	100	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	100	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	100	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	100	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	100	-
8.2(Workmanship and Finish -)	-	100	-
8.3(Workmanship and Finish -)	-	100	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	100	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	100	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	100	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	100	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	100	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	100	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	100	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	100	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	100	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	100	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	100	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	100	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	100	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	100	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	100	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	100	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	100	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	100	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	100	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	100	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	100	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	100	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	100	-
10(Injector Jets)	-	100	-
10(Injector Jets)	-	100	-
10(Injector Jets)	-	100	-
10(Injector Jets)	-	100	-
10(Injector Jets)	-	100	-
10(Injector Jets)	-	100	-
11.1(Burners- Cl. 10 of IS 5116)	-	50	-
11.1(Burners- Cl. 10 of IS 5116)	-	50	-
11.1(Burners- Cl. 10 of IS 5116)	-	50	-
11.1(Burners- Cl. 10 of IS 5116)	-	50	-
11.1(Burners- Cl. 10 of IS 5116)	-	50	-
11.2(Burners)	-	50	-
11.3(Burners)	-	50	-
11.4(Burners)	-	50	-
12.1(Burner Pan Support)	-	50	-
12.2(Burner Pan Support)	-	50	-
12.3(Burner Pan Support)	-	50	-
13.1(Gas Soundness Test - Cl. 16 of IS 5116)	-	200	-
13,2(Gas Soundness Test)	-	200	-
13.2(Gas Leak Detector)	-	200	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	50	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	50	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	50	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	50	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	50	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	50	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	50	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	50	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	50	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	50	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	50	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	50	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	50	-
14.2(Gas Inlet Connection)	-	50	-
14.2(Gas Inlet Connection)	-	50	-
14.2(Gas Inlet Connection)	-	50	-
14.2(Gas Inlet Connection)	-	50	-
14.3(Gas Inlet Connection)	-	50	-
14.4(Gas Inlet Connection)	-	50	-
14.5(Gas Inlet Connection - Cl. 17.3 of IS 5116)	-	50	-
14.6(Gas Inlet Connection)	-	50	-
15.0(Strength and Rigidity)	-	300	-
15.0(Strength and Rigidity)	-	300	-
15.0(Strength and Rigidity)	-	300	-
15.0(Strength and Rigidity)	-	300	-
17.0(Gas Consumption Test)	-	300	-
17.0(Gas Consumption Test)	-	300	-
17.0(Gas Consumption Test)	-	300	-
17.0(Gas Consumption Test)	-	300	-
17.0(Gas Consumption Test)	-	300	-
17.0(Gas Consumption Test)	-	300	-
17.2(Gas Consumption Test - For Gas Stoves)	-	300	-
17.2 (a)(Gas Consumption Test - For Gas Stoves)	-	300	-
17.2 (b)(Gas Consumption Test - For Gas Stoves)	-	300	-
17.2 (c)(Gas Consumption Test - For Gas Stoves)	-	300	-
17.3(Gas Consumption Test - For Built in Hobs)	-	300	-
17.3.1(Gas Consumption Test - For Built in Hobs)	-	300	-
17.3.2(Gas Consumption Test - For Built in Hobs)	-	300	-
18.1(Ignition and Flame Travel)	-	100	-
18.1(Ignition and Flame Travel)	-	100	-
18.2(Ignition and Flame Travel)	-	100	-
18.3(Ignition and Flame Travel)	-	100	-
18.4(Ignition and Flame Travel - Cl. 14 of IS 5116)	-	100	-
18.4(Ignition and Flame Travel - Cl. 14 of IS 5116)	-	100	-
18.4(Ignition and Flame Travel - Cl. 14 of IS 5116)	-	100	-
18.4(Ignition and Flame Travel - Cl. 14 of IS 5116)	-	100	-
18.4(Ignition and Flame Travel - Cl. 14 of IS 5116)	-	100	-
18.4(Ignition and Flame Travel - Cl. 14 of IS 5116)	-	100	-
19.1(Flame Stability)	-	100	-
19.1.1(Flame Stability)	-	100	-
19.2(Flame Stability)	-	100	-
19.3(Flame Stability)	-	100	-
20(Noise Control)	-	200	-
21(Flash Back)	-	200	-
22(Formation of Soot)	-	200	-
23(Resistance to Draught)	-	300	-
24.1(Combustion)	-	200	-
24.1(Combustion)	-	200	-
24.2(Combustion)	-	300	-
25.1(Fire Hazard and Limiting Temperatures)	-	2000	-
25.1(Fire Hazard and Limiting Temperatures)	-	2000	-
25.1(Fire Hazard and Limiting Temperatures)	-	2000	-
25.1(Fire Hazard and Limiting Temperatures)	-	2000	-
25.2(Fire Hazard and Limiting Temperatures)	-	2000	-
26.1(Thermal Efficiency- Gas Stoves)	-	2000	-
26.1(Thermal Efficiency- Gas Stoves)	-	2000	-
26.1(Thermal Efficiency- Gas Stoves)	-	2000	-
26.1(Thermal Efficiency- Gas Stoves)	-	2000	-
26.1(Thermal Efficiency- Gas Stoves)	-	2000	-
26.2(Thermal Efficiency- For Built in Hobs)	-	2000	-
26.2(Thermal Efficiency- For Built in Hobs)	-	2000	-
26.2(Thermal Efficiency- For Built in Hobs)	-	2000	-
26.2(Thermal Efficiency- For Built in Hobs)	-	2000	-
26.2(Thermal Efficiency- For Built in Hobs)	-	2000	-
4.1(General - IS 4246 : 2025)	-	0	-
4.1(General - IS 4246 : 2025)	-	0	-
4.1.1(General - IS 4246 : 2025)	-	0	-
5(Materials - Cl. 5 of IS 5116)	-	0	-
5.1.1(Materials - Toughened glass, if provided,)	-	0	-
5.1.1(Materials - Toughened glass, if provided,)	-	0	-
5.1.1(Materials - Toughened glass, if provided,)	-	0	-
5.1.1(Materials - Toughened glass, if provided,)	-	0	-
5.1.1(Materials - Toughened glass, if provided,)	-	0	-
5.1.1(Materials - Toughened glass, if provided,)	-	0	-
5.1.1(Materials - Toughened glass, if provided,)	-	0	-
5.1.1(Materials - Toughened glass, if provided,)	-	0	-
5.1.1(Materials - Toughened glass, if provided,)	-	0	-
5.1(Materials - IS 5116)	-	0	-
5.1(Materials - IS 5116)	-	0	-
5.1.1(Materials - IS 5116)	-	0	-
5.1.1(Materials - IS 5116)	-	0	-
5.2(Materials - IS 5116)	-	0	-
5.2(Materials - IS 5116)	-	0	-
5.3(Materials - IS 5116)	-	0	-
5.5(Materials - IS 5116)	-	0	-
5.5(Materials - IS 5116)	-	0	-
5.5(Materials - IS 5116)	-	0	-
5.7(Materials - IS 5116)	-	0	-
6.1(Design for Maintainance)	-	0	-
6.1(Design for Maintainance)	-	0	-
6.2(Design for Maintainance)	-	0	-
6.2(Design for Maintainance)	-	0	-
6.3(Design for Maintainance)	-	0	-
6.4(Design for Maintainance)	-	0	-
6.5(Design for Maintainance)	-	0	-
6.6(Design for Maintainance)	-	0	-
7.0(Rigidity and Stability)	-	0	-
7.1(Rigidity and Stability)	-	0	-
7.2(Rigidity and Stability)	-	0	-
7.3(Rigidity and Stability)	-	0	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	0	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	0	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	0	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	0	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	0	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	0	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	0	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	0	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	0	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	0	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	0	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	0	-
8.2(Workmanship and Finish -)	-	0	-
8.3(Workmanship and Finish -)	-	0	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	0	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	0	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	0	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	0	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	0	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	0	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	0	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	0	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	0	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	0	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	0	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	0	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	0	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	0	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	0	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	0	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	0	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	0	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	0	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	0	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	0	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	0	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	0	-
10(Injector Jets)	-	0	-
10(Injector Jets)	-	0	-
10(Injector Jets)	-	0	-
10(Injector Jets)	-	0	-
10(Injector Jets)	-	0	-
10(Injector Jets)	-	0	-
11.1(Burners- Cl. 10 of IS 5116)	-	0	-
11.1(Burners- Cl. 10 of IS 5116)	-	0	-
11.1(Burners- Cl. 10 of IS 5116)	-	0	-
11.1(Burners- Cl. 10 of IS 5116)	-	0	-
11.1(Burners- Cl. 10 of IS 5116)	-	0	-
11.2(Burners)	-	0	-
11.3(Burners)	-	0	-
11.4(Burners)	-	0	-
12.1(Burner Pan Support)	-	0	-
12.2(Burner Pan Support)	-	0	-
12.3(Burner Pan Support)	-	0	-
13.1(Gas Soundness Test - Cl. 16 of IS 5116)	-	0	-
13,2(Gas Soundness Test)	-	0	-
13.2(Gas Leak Detector)	-	0	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	0	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	0	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	0	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	0	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	0	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	0	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	0	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	0	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	0	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	0	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	0	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	0	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	0	-
14.2(Gas Inlet Connection)	-	0	-
14.2(Gas Inlet Connection)	-	0	-
14.2(Gas Inlet Connection)	-	0	-
14.2(Gas Inlet Connection)	-	0	-
14.3(Gas Inlet Connection)	-	0	-
14.4(Gas Inlet Connection)	-	0	-
14.5(Gas Inlet Connection - Cl. 17.3 of IS 5116)	-	0	-
14.6(Gas Inlet Connection)	-	0	-
15.0(Strength and Rigidity)	-	0	-
15.0(Strength and Rigidity)	-	0	-
15.0(Strength and Rigidity)	-	0	-
15.0(Strength and Rigidity)	-	0	-
17.0(Gas Consumption Test)	-	0	-
17.0(Gas Consumption Test)	-	0	-
17.0(Gas Consumption Test)	-	0	-
17.0(Gas Consumption Test)	-	0	-
17.0(Gas Consumption Test)	-	0	-
17.0(Gas Consumption Test)	-	0	-
17.2(Gas Consumption Test - For Gas Stoves)	-	0	-
17.2 (a)(Gas Consumption Test - For Gas Stoves)	-	0	-
17.2 (b)(Gas Consumption Test - For Gas Stoves)	-	0	-
17.2 (c)(Gas Consumption Test - For Gas Stoves)	-	0	-
17.3(Gas Consumption Test - For Built in Hobs)	-	0	-
17.3.1(Gas Consumption Test - For Built in Hobs)	-	0	-
17.3.2(Gas Consumption Test - For Built in Hobs)	-	0	-
18.1(Ignition and Flame Travel)	-	0	-
18.1(Ignition and Flame Travel)	-	0	-
18.2(Ignition and Flame Travel)	-	0	-
18.3(Ignition and Flame Travel)	-	0	-
18.4(Ignition and Flame Travel - Cl. 14 of IS 5116)	-	0	-
18.4(Ignition and Flame Travel - Cl. 14 of IS 5116)	-	0	-
18.4(Ignition and Flame Travel - Cl. 14 of IS 5116)	-	0	-
18.4(Ignition and Flame Travel - Cl. 14 of IS 5116)	-	0	-
18.4(Ignition and Flame Travel - Cl. 14 of IS 5116)	-	0	-
18.4(Ignition and Flame Travel - Cl. 14 of IS 5116)	-	0	-
19.1(Flame Stability)	-	0	-
19.1.1(Flame Stability)	-	0	-
19.2(Flame Stability)	-	0	-
19.3(Flame Stability)	-	0	-
20(Noise Control)	-	0	-
21(Flash Back)	-	0	-
22(Formation of Soot)	-	0	-
23(Resistance to Draught)	-	0	-
24.1(Combustion)	-	0	-
24.1(Combustion)	-	0	-
24.2(Combustion)	-	0	-
25.1(Fire Hazard and Limiting Temperatures)	-	0	-
25.1(Fire Hazard and Limiting Temperatures)	-	0	-
25.1(Fire Hazard and Limiting Temperatures)	-	0	-
25.1(Fire Hazard and Limiting Temperatures)	-	0	-
25.2(Fire Hazard and Limiting Temperatures)	-	0	-
26.1(Thermal Efficiency- Gas Stoves)	-	0	-
26.1(Thermal Efficiency- Gas Stoves)	-	0	-
26.1(Thermal Efficiency- Gas Stoves)	-	0	-
26.1(Thermal Efficiency- Gas Stoves)	-	0	-
26.1(Thermal Efficiency- Gas Stoves)	-	0	-
26.2(Thermal Efficiency- For Built in Hobs)	-	0	-
26.2(Thermal Efficiency- For Built in Hobs)	-	0	-
26.2(Thermal Efficiency- For Built in Hobs)	-	0	-
26.2(Thermal Efficiency- For Built in Hobs)	-	0	-
26.2(Thermal Efficiency- For Built in Hobs)	-	0	-

04 Jul, 2027

-
Included w.e.f 31.12.2025 "Exclusion 5.1.1 (Materials - Toughened glass, if provided,) "

IS 17681 (2022)

Specification for Bottled water dispensers

215000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Construction)	-	1000	-
4.1(General Design)	-	500	-
4.2(Materials)	-	500	-
4.3(Finish)	-	500	-
4.4(Thermal Insulation)	-	500	-
4.5(Hardware)	-	500	-
4.6(Disposal of Waste Water)	-	500	-
4.7(Hot Water Tank)	-	500	-
4.8(Hermetically Sealed Compressor)	-	500	-
4.9(Protective Guards)	-	500	-
5(Refrigeration System)	-	2000	-
5.1(Pipes and Connections/Fitting)	-	500	-
5.2(Control of Operation)	-	500	-
6.1(General)	-	28500	-
6.1(Protection against electric shock (Cl. 8 of IS 302-2-24))	-	2500	-
6.1(Power Input & Current (Cl. 10 of IS 302-2-24))	-	5000	-
6.1(Temperature Rise/ Heating (Cl. 11 of IS 302-2-24))	-	5000	-
6.1("Insulation Resistance and Electric Strength/ Leakage Current and Electric Strength (Cl. 13 of IS 302-2-24)")	-	4000	-
6.1("Moisture Resistance (Cl. 15 of IS 302-2-24)")	-	4000	-
6.1("Insulation resistance and electric strength (After humidity treatment) (Cl. 16 of IS 302-2-24)")	-	4000	-
6.1("Provision For Earthing (Cl. 27 of IS 302-2-24)")	-	4000	-
6.1("Screws & Connections (Cl. 28 of IS 302-2-24)")	-	3000	-
6.2(Electrical Accessories)	-	1500	-
6.3(Salt Mist Test)	-	25000	-
7(Sound pressure level)	-	15000	-
10.1(Cooling Capacity Test)	-	15000	-
10.2(Maximum Operating Condition Test (Environmental))	-	15000	-
10.3(Maximum Operating Condition Test (Voltage))	-	15000	-
10.4(Heating Capacity Test)	-	15000	-
10.5(Annual Energy Consumption Test)	-	30000	-
10.6(Freeze-up Test)	-	20000	-
10.7(Door Opening and Closing Test)	-	10000	-
10.8(Door Seal Test)	-	3000	-
10.9(Pull-down Test)	-	10000	-
11(Marking and instruction)	-	1000	-

04 Jul, 2027

-
Included w.e.f. 12.11.2025

IS 7872 (2020)

Deep Freezers - Specification ( Second Revision )

155000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
10.2.12(Temperature rise test)	-	10000	-
10.2.11(Measurement )	-	1000	-
10.2.10.1(Test packages and life time)	-	1000	-
10.2.10(Full load test)	-	8000	-
10.2.8(Earth resistance test )	-	1000	-
10.2.7(Leakage current test )	-	1000	-
10.2.6(Insulation resistance test)	-	1000	-
10.2.5(High voltage test)	-	1000	-
10.2.3(Thermal insulation test )	-	10000	-
10.2.2(Machanical strength of shelves and similar components)	-	2000	-
10.2.1(Door seal test )	-	4000	-
9.2.2(Power consumption & percentage running time)	-	20000	-
9.2.1(Pull down time)	-	8000	-
9.1(No load test)	-	8000	-
6.11(Volume measurement Water fill method)	-	7000	-
6(Measurement of freezer storage capacity)	-	7000	-
5.1(Sound level)	-	6000	-
5.6(External surface condensation test)	-	10000	-
5.5(Strength Pressure test for components)	-	2000	-
4.8(Doors & Fittings)	-	7000	-
13(Marking and Instruction)	-	1000	-
11.7(Pressure Test)	-	10000	-
11.6(Thermal Insulation Test ( External Condensation))	-	10000	-
11.5(Mechanical Strength of Shelves and Similar Components)	-	2000	-
11.4(Door Seal Test)	-	4000	-
11.3(Temperature Rise Test)	-	10000	-
11.2(Energy Consumption Test)	-	20000	-
11.1(No load Pull down Test)	-	8000	-
8(Freezer Storage Capacity)	-	7000	-
7(Sound Pressure Level)	-	6000	-
6(Safety Requirements)	-	70000	-
5.4.4(Fatigue Test)	-	10000	-
5.4.3(Individual Strength - Pressure Test)	-	10000	-
5.4.2(Individual Strength - Pressure Test)	-	10000	-
4.8(Door and Fittings)	-	7000	-
13(Marking and Instruction)	-	1000	-
11.7(Pressure Test)	-	10000	-
11.6(Thermal Insulation Test ( External Condensation))	-	10000	-
11.5(Mechanical Strength of Shelves and Similar Components)	-	2000	-
11.4(Door Seal Test)	-	4000	-
11.3(Temperature Rise Test)	-	10000	-
11.2(Energy Consumption Test)	-	20000	-
11.1(No load Pull down Test)	-	8000	-
8(Freezer Storage Capacity)	-	7000	-
7(Sound Pressure Level)	-	6000	-
6(Safety Requirements)	-	70000	-
5.4.4(Fatigue Test)	-	10000	-
5.4.3(Individual Strength - Pressure Test)	-	10000	-
5.4.2(Individual Strength - Pressure Test)	-	10000	-
4.8(Door and Fittings)	-	7000	-
5(Refrigeration system)	-	10000	-
Cl-4.1(General Design)	-	500	-
Cl-4.2(Materials)	-	500	-
Cl-4.3(Finish)	-	10000	-
Cl-4.4(Thermal Insulation)	-	500	-
Cl-4.5(Fittings)	-	500	-
Cl-4.6(Hardware)	-	500	-
Cl-4.7(Interior Fittings)	-	500	-
Cl-4.8(Doors and Fittings)	-	7000	-
Cl-4.9(Disposal of Defrost / Condensate Water)	-	500	-
Cl-5.1(Construction)	-	500	-
Cl-5.2(Control of Operation)	-	500	-
Cl-5.3(Location of Components)	-	500	-
6.5(For flammable refrigerant the units should comply with IS/IEC 60335-2-89)	-	500	-
6.2(The compressor shall comply with the requirements of IS 10617)	-	500	-

04 Jul, 2027

-
Included w.e.f 17.12.2025 Exclusion: Cl.24 of IS/IEC 60335-2-89 and EMI/EMC Tests as per Cl.19.11.4.1 to Cl.19.11.4.7 of IS/IEC 60335-2-89).

IS 17550 : Part 3 (2025)

Household Refrigerating Appliances - Characteristics and Methods Of Test Part 3 Energy Consumption and Volume (First Revision)

130000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 4.1, Annex A(set up for energy consumption)	-	10000	-
Clause 4.2, Annex B(Steady state power consumption)	-	15000	-
Clause 4.3, Annex C(Defrost and Recovery Energy and Temperature Change)	-	15000	-
Clause 4.4, Annex D(Defrost Frequency)	-	20500	-
Clause 4.5, Annex E(Number of Test Points and Interpolation)	-	10000	-
Clause 4.6, Annex G(Load Processing Efficiency)	-	20000	-
Clause 4.7, Annex F(Specified Auxiliaries)	-	20000	-
Clause 4.8, Annex H(Volume determination)	-	9500	-
Clause 4.8.1, Annex H(Rated total volume)	-	9500	-
Clause 5, 5.1, 5.2 Table 1(TARGET TEMPERATURES FOR ENERGY DETERMINATION)	-	10000	-
Clause 6, 6.1 to 6.8(DETERMINATION OF ENERGY CONSUMPTION)	-	20000	-

04 Jul, 2027

-
Included w.e.f 17.12.2025

IS 17550 : PART 3 (2021)

Household Refrigerating Appliance- Characteristics and test methods Part 3 Energy Consumption and volume

130000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
"Cl. No. 6 "("DETERMINATION OF ENERGY CONSUMPTION")	-	20000	-
"Cl. No.4.8 & Annex H "(Determination Of Volume)	-	9500	-
"Cl. No. 6 "("DETERMINATION OF ENERGY CONSUMPTION")	-	20000	-
"Cl. No. 6 "("DETERMINATION OF ENERGY CONSUMPTION")	-	20000	-
"Cl. No.4.8 & Annex H "(Determination Of Volume)	-	9500	-
4.2(Steady State Power Consumption)	-	20000	-
4.3(Defrost and Recovery Energy and temperature change)	-	15000	-
4.4(Defrost Frequency)	-	20500	-
4.5(Number of Test Points and Interpolations)	-	10000	-
4.6(Load Processing Efficiency)	-	20000	-
4.7(Specified Auxiliaries)	-	20000	-
4.8(Volumn Determination)	-	9500	-
6(Determination of Energy Consumption)	-	20000	-
Annex B(Determination of Steady state Power & Temperature)	-	15000	-
Annex C(Defrost and Recovery Energy and temperature change)	-	15000	-
Annex D(Defrost Interval)	-	20500	-
Annex E(Interpolation of Results)	-	10000	-
Annex F(Energy Consumption of specified auxiliaries)	-	20000	-
Annex G(Determination of Load Processing Efficiency)	-	20000	-
Annex H(Determination of Volume)	-	9500	-

04 Jul, 2027

-
Included w.e.f 04.11.2025

IS 17550 : Part 2 (2024)

Household Refrigerating Appliances - Characteristics and Test Methods Part 2 Performance Requirements (First Revision)

340000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Storage Test)	-	50000	-
7(Cooling Capacity Test)	-	45000	-
8(Freezing Capacity Test)	-	45000	-
9("Automatic Ice-Making Capacity Test")	-	45000	-
Cl. No.4.6 & Annex A(PULL-DOWN TEST)	-	35000	-
Cl. No.4.6(b) & Annex B("Wine Storage Appliances And Compartments; Storage Test")	-	35000	-
Cl. No.4.6(C) & AnnexC("Temperature Rise Test ")	-	45000	-
Cl. No.4.6(d) & Annex D("Water Vapour Condensation Test ")	-	40000	-

04 Jul, 2027

-
Included w.e.f 17.12.2025

IS 17550 : Part 1 (2024)

Household Refrigerating Appliances - Characteristics and Test Methods Part 1 General Requirements (First Revision)

240000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(MARKING)	-	2000	-
8(MATERIALS, DESIGN, AND MANUFACTURE)	-	9000	-
9(Testing The Air Tightness Of Door Or Lid Seal(S))	-	9000	-
10(Testing The Opening Force Of Door(S) Or Lid(S))	-	10000	-
11(Testing The Durability Of Hinges And Handles Of Door(S) And Lid(S)	-	50000	-
14(Ice-Making Test (If Applicable))	-	35000	-
15(Test For Absence Of Odour And Taste)	-	45000	-
16(Safety Requirements)	-	65000	-
12(Testing The Mechanical Strength Of Shelves And Similar Components)	-	15000	-

04 Jul, 2027

-
Included w.e.f 17.12.2025

IS 17550 : PART 1 (2021)

HOUSEHOLD REFRIGERATING APPLIANCES CHARACTERISTICS AND TEST METHODS Part 1 General Requirements

240000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
"Cl. No. 9 "(Testing The Air Tightness Of Door Or Lid Seal(S))	-	7000	-
"Cl. No.10 "(Testing The Opening Force Of Door(S) Or Lid(S))	-	10000	-
"Cl. No.11 "(Testing The Durability Of Hinges And Handles Of Door(S) And Lid(S))	-	40000	-
"Cl. No.12 "(Testing The Mechanical Strength Of Shelves And Similar Components)	-	13000	-
"Cl. No.14 "(Ice-Making Test (If Applicable))	-	20000	-
"Cl. No.15 "(Test For Absence Of Odour And Taste)	-	45000	-
"Cl. No.16 "(Safety Requirements)	-	61500	-
"Cl. No. 9 "(Testing The Air Tightness Of Door Or Lid Seal(S))	-	7000	-
"Cl. No.10 "(Testing The Opening Force Of Door(S) Or Lid(S))	-	10000	-
"Cl. No.11 "(Testing The Durability Of Hinges And Handles Of Door(S) And Lid(S))	-	40000	-
"Cl. No.12 "(Testing The Mechanical Strength Of Shelves And Similar Components)	-	13000	-
"Cl. No.14 "(Ice-Making Test (If Applicable))	-	20000	-
"Cl. No.15 "(Test For Absence Of Odour And Taste)	-	45000	-
"Cl. No.16(a) "(Protection against acess to live parts)	-	5000	-
"Cl. No.16(b) "(Power input and current)	-	10500	-
"Cl. No.16(c) "(Heating)	-	17000	-
"Cl. No.16(d) "(Leakage current and electric strength at operating temperature)	-	6000	-
"Cl. No.16(e) "(Moisture resistance)	-	17000	-
"Cl. No.16(f) "(Leakage current and electric strength)	-	6000	-
"Cl. No.20.3(a) "("Production Routine Test a)Leakage current test ")	-	5000	-
"Cl. No.20.3(b) "(b) Earth continuity tesT)	-	5000	-
"Cl. No.20.3(c) "(c) Electric strength)	-	5000	-
"Cl. No.8.11 "(Thermostat function test)	-	3500	-
"Cl. No.5 "(Markings)	-	2000	-
4(Classification)	-	500	-
5(Marking)	-	2000	-
6.2(Determination of Linear Dimensions)	-	1000	-
7(Instructions)	-	500	-
8.2(Material and Finishes)	-	500	-
8.3(Thermal Insulation and Air Tightness)	-	500	-
8.4(Doors, Lids and Fittings)	-	500	-
8.5(Shelves and Containers)	-	500	-
8.6(Disposal of Defrost Water)	-	500	-
8.7(Refrigerating System)	-	500	-
8.8(Supply Cord)	-	500	-
8.9(Compressor)	-	500	-
8.10(Temperature Sensing Controls (Thermostat))	-	5000	-
8.11(Temperature Sensing Controls (Thermostat) Setting)	-	3500	-
9(Testing the Air tightness of door or lid seal(s) before water vapour condensation test)	-	7000	-
9(Testing the Air tightness of door or lid seal(s) after water vapour condensation test)	-	7000	-
10(Testing the Opening force of door(s) or lid(s))	-	10000	-
11(Testing the Durability of hinges and handles of door(s) and lid(s))	-	40000	-
12(Testing the Mechanical strength of shelves and similar components)	-	13000	-
13(Water-vapour condensation test)	-	40000	-
14(Ice-making test (if applicable))	-	20000	-
15(Test for absence of odour and taste)	-	45000	-
16(a)(Protection against access to live parts)	-	5000	-
16(b)(Power input and current)	-	10500	-
16 (c(Heating)	-	17000	-
16(d)(Leakage current and electric strength at operating temperature)	-	6000	-
16(e)(Moisture resistance)	-	17000	-
16(f)(Leakage current and electric strength (high voltage after humidity))	-	6000	-
17(Packing)	-	4000	-
18(Designation)	-	4000	-
19(Instructions for Use and Maintenance)	-	4000	-
20.3 (a)(Leakage Current Test)	-	5000	-
20.3 (b)(Earth Continuity Test)	-	5000	-
20.3 (c(Electric Strength Test)	-	5000	-

04 Jul, 2027

-
Included w.e.f 17.12.2025

IS 4246 (2002)

Domestic gas stoves for use with liquefied petroleum gases - Specification (Fifth Revision)

18000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.24(Annexure E)(on no account the carbon monoxidel carbon dioxide ratio of the exhaust gases of any burner. operating at any consumption at which the burner is stable at gas inlet pressure from 2452 kN/m2 to 3432 kN/m2 (25 gf/cm2 to 35 gf/cm2), exceed 0.02.)	-	500	-
Cl.23(There shall be no extinction of the flames on any of the burners operating at maximum consumption when the appliance is placed in a general (not localized) current of air with a velocity of 2 m/s, as measured with a rotating vane anemometer. The location of the appliance relative to neighboring walls and the direction of the draught shall be varied to correspond to likely conditions of appliance installation. This applies for all pressures from 2452 kN/m2 to 3432 kN/m2 (25 gf/cm2 to 35 gf/cm2).)	-	500	-
24 (Annex - E)(Combustion (CO and CO2 ratio))	-	500	-
4.1(Requirement)	-	500	-
5(Materials)	-	500	-
6(Design for Maintenance)	-	500	-
7(Rigidity and Stability)	-	500	-
8(Workmanship and Finish)	-	500	-
9(Gas Taps)	-	500	-
10(Injector Jets)	-	500	-
11(Burners)	-	500	-
12(Burner Pan Supports)	-	500	-
13.1(Gas Soundness)	-	500	-
13.2(Gas Leak Detector)	-	1000	-
14(Gas Inlet Connections)	-	500	-
15(Strength and Rigidity)	-	500	-
16(General Conditions of Test)	-	500	-
17.1.1(Gas Consumption)	-	500	-
18(Ignition and Flame Travel)	-	500	-
19(Flame Stability)	-	500	-
20(Noise Control)	-	500	-
21(Flash Back)	-	500	-
22(Formation of Soot)	-	500	-
23(Resistance to Draught)	-	500	-
24(Combustion)	-	500	-
25(Fire Hazard and Limiting Temperature)	-	1000	-
26(Thermal Efficiency)	-	1000	-
27.1(Type Tests)	-	500	-
27.2(Routine Tests)	-	500	-
29(Marking)	-	500	-
30(Packing)	-	500	-
5.1.2(Toughened glass- Adhesive tape)	-	500	-
5.1.3(Thermal Shock test)	-	500	-
24 (Annex - E)(Combustion (CO and CO2 ratio))	-	500	-
4.1(Requirement)	-	500	-
5(Materials)	-	500	-
6(Design for Maintenance)	-	500	-
7(Rigidity and Stability)	-	500	-
8(Workmanship and Finish)	-	500	-
9(Gas Taps)	-	500	-
10(Injector Jets)	-	500	-
11(Burners)	-	500	-
12(Burner Pan Supports)	-	500	-
13.1(Gas Soundness)	-	500	-
13.2(Gas Leak Detector)	-	1000	-
14(Gas Inlet Connections)	-	500	-
15(Strength and Rigidity)	-	500	-
16(General Conditions of Test)	-	500	-
17.1.1(Gas Consumption)	-	500	-
18(Ignition and Flame Travel)	-	500	-
19(Flame Stability)	-	500	-
20(Noise Control)	-	500	-
21(Flash Back)	-	500	-
22(Formation of Soot)	-	500	-
23(Resistance to Draught)	-	500	-
24(Combustion)	-	500	-
25(Fire Hazard and Limiting Temperature)	-	1000	-
26(Thermal Efficiency)	-	1000	-
27.1(Type Tests)	-	500	-
27.2(Routine Tests)	-	500	-
29(Marking)	-	500	-
30(Packing)	-	500	-
5.1.2(Toughened glass- Adhesive tape)	-	500	-
5.1.3(Thermal Shock test)	-	500	-
24 (Annex - E)(Combustion (CO and CO2 ratio))	-	-	-
4.1(Requirement)	-	-	-
5(Materials)	-	-	-
6(Design for Maintenance)	-	-	-
7(Rigidity and Stability)	-	-	-
8(Workmanship and Finish)	-	-	-
9(Gas Taps)	-	-	-
10(Injector Jets)	-	-	-
11(Burners)	-	-	-
12(Burner Pan Supports)	-	-	-
13.1(Gas Soundness)	-	-	-
13.2(Gas Leak Detector)	-	-	-
14(Gas Inlet Connections)	-	-	-
15(Strength and Rigidity)	-	-	-
16(General Conditions of Test)	-	-	-
17.1.1(Gas Consumption)	-	-	-
18(Ignition and Flame Travel)	-	-	-
19(Flame Stability)	-	-	-
20(Noise Control)	-	-	-
21(Flash Back)	-	-	-
22(Formation of Soot)	-	-	-
23(Resistance to Draught)	-	-	-
24(Combustion)	-	-	-
25(Fire Hazard and Limiting Temperature)	-	-	-
26(Thermal Efficiency)	-	-	-
27.1(Type Tests)	-	-	-
27.2(Routine Tests)	-	-	-
29(Marking)	-	-	-
30(Packing)	-	-	-
5.1.2(Toughened glass- Adhesive tape)	-	-	-
5.1.3(Thermal Shock test)	-	-	-

04 Jul, 2027

-
Included w.e.f. 27.08.2025

IS 16270 (2023)

Secondary cells and batteries for solar photovoltaic application - General requirements and methods of test

320000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4.1(Photovoltaic Energy System)	-	1000	5 % Discount for BIS.
Cl-4.2(Secondary Cells and Batteries)	-	1000	5 % Discount for BIS.
Cl-4.3(General Operating Conditions)	-	1000	5 % Discount for BIS.
Cl-4.3.8(Storage)	-	1000	5 % Discount for BIS.
Cl-4.3.9(Operating Temperature)	-	1000	5 % Discount for BIS.
Cl-5.1(Mechanical Endurance)	-	1000	5 % Discount for BIS.
Cl-5.2(Charge Efficiency)	-	1000	5 % Discount for BIS.
Cl-5.3(Deep Discharge Protection)	-	1000	5 % Discount for BIS.
Cl-5.4(Marking)	-	1000	5 % Discount for BIS.
Cl-5.5(Safety)	-	1000	5 % Discount for BIS.
Cl-5.6(Documentation)	-	1000	5 % Discount for BIS.
Cl-6(Functional characteristice)	-	1000	5 % Discount for BIS.
Cl-7(General test conditions)	-	1000	5 % Discount for BIS.
Cl-8.1(Capacity Test)	-	58000	5 % Discount for BIS.
Cl-8.2(Endurance Test)	-	40000	5 % Discount for BIS.
Cl-8.3(Charge Retention Test)	-	50000	5 % Discount for BIS.
Cl-8.4(Cycle Endurance in Photovoltaic Application (Extreme Conditions))	-	60000	5 % Discount for BIS.
Cl-8.5(Sulphation Test (Applicable for Lead Acid Batteries only))	-	50000	5 % Discount for BIS.
Cl-8.6(Water Loss Test (Valid for Flooded Lead Acid Batteries only))	-	45000	5 % Discount for BIS.
Cl-9.1(Type Tests)	-	1000	5 % Discount for BIS.
Cl-9.2(Acceptance Test)	-	1000	5 % Discount for BIS.
4.3.7.1(Specific gravity)	-	2000	5 % Discount for BIS.

04 Jul, 2027

-
Included w.e.f 18.07.2025

IS 302 : Part 2 : Sec 80 (2017)

Household and similar electrical appliances - Safety: Part 2 - 80 particular requirements for fans (First Revision)

20000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
32.0(Radiation, Toxicity and Similar Hazards)	-	1000	-
31.0(Resistance To Rusting)	-	1000	-
30.0(Resistance To Heat and Fire)	-	1000	-
29.0(Creepage Distances and Clearances)	-	1000	-
28.0(Screws and Connections)	-	1000	-
27.0(Provision For Earthing)	-	1000	-
26.0(Terminals for external conductors)	-	1000	-
25.0(Supply Connection and External Flexible Cords)	-	1000	-
23.0(Internal Wiring)	-	1000	-
22.0(Construction)	-	1000	-
21.0(Mechanical Strength)	-	1000	-
20.0(Stability and mechanical hazards)	-	1000	-
19.0(Abnormal Operation)	-	1000	-
17.0(Overload Protection of transformer and associated circuit)	-	1000	-
16.0(Leakage current and Electric strength (After Humidity (Environmental) Treatment))	-	1000	-
15.0(Moisture resistance)	-	1000	-
14.0(Transient Overvoltage)	-	1000	-
13.0(Leakage Current and electric strength at operating temperature)	-	1000	-
11.0(Heating)	-	1000	-
10.0(Input and Current)	-	1000	-
8.0(Protection against access to live parts)	-	1000	-
7.0(Classification)	-	1000	-
6.0(Marking and Instructions)	-	1000	-
4(GENERAL REQUIREMENT)	-	1000	-
5(GENERAL CONDITIONS FOR THE TESTS)	-	1000	-
24.0(Components)	-	0	-
19.11.4.1(Electrostatic discharges)	-	0	-
19.11.4.2(Radiated fields)	-	0	-
19.11.4.3(Fast transient bursts)	-	0	-
19.11.4.4(Surge immunity test)	-	0	-
19.11.4.5(Immunity to conducted discharges)	-	0	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	0	-
19.11.4.7(Harmonics)	-	0	-

04 Jul, 2027

-
Included w.e.f.17.03.2025 Exclusion Cl 19.11.4.1 to Cl 19.11.4.7 (EMI/EMC) Cl 24 (Components)

IS 302 : Part 2 : Sec 30 (2007)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 30 room heaters (First Revision)

20000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.6 (Classification)	-	500	-
Cl.6 (Classification)	-	500	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	500	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	500	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	500	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	500	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	500	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	500	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	500	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	500	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	500	-
Cl.7(Marking and Instructions)	-	500	-
Cl.7(Marking and Instructions)	-	500	-
Cl.7(Marking and Instructions)	-	500	-
Cl.7.3(Marking and Instructions)	-	500	-
Cl.7.3(Marking and Instructions)	-	500	-
Cl.7.3(Marking and Instructions)	-	500	-
Cl.7.4(Marking and Instructions)	-	500	-
Cl.7.5(Marking and Instructions)	-	500	-
Cl.7.6 & IS:302-1:2008(Marking and Instructions)	-	500	-
Cl.7.8 of IS :302-1:2008(Marking and Instructions)	-	500	-
Cl.7.9 of IS :302-1:2008(Marking and Instructions)	-	500	-
Cl.7.10 of IS :302-1:2008(Marking and Instructions)	-	500	-
Cl.7.11 of IS :302-1:2008(Marking and Instructions)	-	500	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	500	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	500	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	500	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	500	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	500	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	500	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	500	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	500	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	500	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	500	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	500	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	500	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	500	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	500	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	500	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	500	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	500	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	500	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	500	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	500	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	500	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	500	-
Cl.7.12.1 & IS:302-1:2009(Marking and Instructions)	-	500	-
Cl.7.13 of IS 302-1:2008(Marking and Instructions)	-	500	-
Cl.7.14 of IS302-1:2008(Marking and Instructions)	-	500	-
Cl.7.14(Marking and Instructions)	-	500	-
Cl.7.14(Marking and Instructions)	-	500	-
Cl.7.15 of IS 302-1:2008(Marking and Instructions)	-	500	-
Cl.7.15 of IS 302-1:2008(Marking and Instructions)	-	500	-
Cl.7.15 of IS 302-1:2008(Marking and Instructions)	-	500	-
Cl.7.15 of IS 302-1:2008(Marking and Instructions)	-	500	-
Cl.7.101(Marking and Instructions)	-	500	-
Cl.8 & IS:302-1:2008(Protection Against Access to Live Parts)	-	500	-
Cl.10 & IS:302-1:2008(Power Input and Current)	-	500	-
Cl.11 & IS:302-1:2008(Heating)	-	500	-
Cl.11 & IS:302-1:2008(Heating)	-	500	-
Cl.11 & IS:302-1:2008(Heating)	-	500	-
Cl.11 & IS:302-1:2008(Heating)	-	500	-
Cl.11 & IS:302-1:2008(Heating)	-	500	-
Cl.11 & IS:302-1:2008(Heating)	-	500	-
Cl.11 & IS:302-1:2008(Heating)	-	500	-
Cl.11 & IS:302-1:2008(Heating)	-	500	-
Cl.11 & IS:302-1:2008(Heating)	-	500	-
Cl.11 & IS:302-1:2008(Heating)	-	500	-
Cl.11 & IS:302-1:2008(Heating)	-	500	-
Cl.11 & IS:302-1:2008(Heating)	-	500	-
Cl.11 & IS:302-1:2008(Heating)	-	500	-
Cl.11 & IS:302-1:2008(Heating)	-	500	-
Cl.11 & IS:302-1:2008(Heating)	-	500	-
Cl.11 & IS:302-1:2008(Heating)	-	500	-
Cl.11.8(Heating)	-	500	-
Cl.11.8(Heating)	-	500	-
Cl.11.8(Heating)	-	500	-
Cl.13 & IS:302-1:2008(Leakage Current & Electric Strength at operating temp. )	-	500	-
Cl.13 & IS:302-1:2008(Leakage Current & Electric Strength at operating temp. )	-	500	-
Cl.14 & IS:302-1:2008(Transient Over Voltages)	-	500	-
Cl.15 & IS: 302-1:2008(Moisture Resistance )	-	500	-
Cl.15.3 of IS 302-1:200(Moisture Resistance )	-	500	-
Cl.16 & IS:302-1:2008(Leakage Current & Electric Strength )	-	500	-
Cl.16 & IS:302-1:2008(Leakage Current & Electric Strength )	-	500	-
Cl.17 & IS:302-1:2008(Over load Protection of Transformers and Associated Circuits )	-	500	-
Cl.18 (Endurance. )	-	0	-
Cl.19 & IS:302-1:2008(Abnormal Operation.)	-	500	-
Cl.19 & IS:302-1:2008(Abnormal Operation.)	-	500	-
Cl.19 & IS:302-1:2008(Abnormal Operation.)	-	500	-
Cl.19 & IS:302-1:2008(Abnormal Operation.)	-	500	-
Cl.19.101(Abnormal Operation.)	-	500	-
Cl.19.102(Abnormal Operation.)	-	500	-
Cl.19.103(Abnormal Operation.)	-	500	-
Cl.19.104(Abnormal Operation.)	-	500	-
Cl.19.105(Abnormal Operation.)	-	500	-
Cl.19.106(Abnormal Operation.)	-	500	-
Table 8 of IS 302-1:2008(Abnormal Operation.)	-	500	-
Cl.19.107(Abnormal Operation.)	-	500	-
Cl.19.108(Abnormal Operation.)	-	500	-
Cl.19.109(Abnormal Operation.)	-	500	-
Cl.19.110(Abnormal Operation.)	-	500	-
Cl.19.111(Abnormal Operation.)	-	500	-
Cl.19.112(Abnormal Operation.)	-	500	-
Cl.19.113(Abnormal Operation.)	-	500	-
Cl.19.114(Abnormal Operation.)	-	500	-
Cl.20 & IS:302-1:2008(Stability & Mechanical Hazards)	-	500	-
Cl.21 & IS:302-1:2008)(Mechanical Strength.)	-	500	-
Cl.21.2 of IS 302-1:2008(Mechanical Strength.)	-	500	-
Cl.21.101 (Mechanical Strength.)	-	500	-
Cl.21.102(Mechanical Strength.)	-	500	-
Cl.21.103(Mechanical Strength.)	-	500	-
Cl.22.1 of IS 302-1:2008(Construction)	-	500	-
Cl.22.5 of IS 302-1:2008(Construction)	-	500	-
Cl.22.6 of IS 302-1:2008(Construction)	-	500	-
Cl.22.7 of IS 302-1:2008(Construction)	-	500	-
Cl.22.8 of IS 302-1:2008(Construction)	-	500	-
Cl.22.9 of IS 302-1:2008(Construction)	-	500	-
Cl.22.11(Construction)	-	500	-
Cl.22.12 of IS 302-1:2008(Construction)	-	500	-
Cl.22.13 of IS 302-1:2008(Construction)	-	500	-
Cl.22.14 of IS 302-1:2008(Construction)	-	500	-
Cl.22.15 of IS 302-1:2008(Construction)	-	500	-
Cl.22.18 of IS 302-1:2008(Construction)	-	500	-
Cl.22.20 of IS 302-1:2008(Construction)	-	500	-
Cl.22.21 of IS 302-1:2008(Construction)	-	500	-
Cl.23 & IS:302-1:2008(Internal Wiring )	-	500	-
Cl.23.4 & Cl.29 of 302-1:2008(Internal Wiring )	-	500	-
Cl.23.5 of 302-1:2008(Internal Wiring )	-	500	-
Cl.23.7 of 302-1:2008(Internal Wiring )	-	500	-
C.23.7 of 302-1:2008(Internal Wiring )	-	500	-
Cl.25.1 of 302-1:2008(Supply Connection and External Flexible Cords )	-	500	-
Cl. 25.2 of IS 3021:2008(Supply Connection and External Flexible Cords )	-	500	-
Cl. 25.3 of IS 302-1:2008(Supply Connection and External Flexible Cords )	-	500	-
Cl. 25.4 of IS 302-1:2008(Supply Connection and External Flexible Cords )	-	500	-
Cl.25.5 of 302-1:2008(Supply Connection and External Flexible Cords )	-	500	-
Cl.25.7.(Supply Connection and External Flexible Cords )	-	500	-
Cl.25.8(Supply Connection and External Flexible Cords )	-	500	-
Cl. 25.9(Supply Connection and External Flexible Cords )	-	500	-
Cl.25.10 of 302-1:2008(Supply Connection and External Flexible Cords )	-	500	-
Cl. 25.11(Supply Connection and External Flexible Cords )	-	500	-
Cl. 25.12(Supply Connection and External Flexible Cords )	-	500	-
Cl. 25.13(Supply Connection and External Flexible Cords )	-	500	-
Cl.25.14 of IS 302-1:2008(Supply Connection and External Flexible Cords )	-	500	-
Cl.25.15 of IS 302-1:2008(Supply Connection and External Flexible Cords )	-	500	-
Cl.25.15 of IS 302-1:2008(Supply Connection and External Flexible Cords )	-	500	-
Cl.25.18(Supply Connection and External Flexible Cords )	-	500	-
Cl.25.20(Supply Connection and External Flexible Cords )	-	500	-
Cl.26.1 of IS 302-1:2008(Terminal for External Conductors )	-	500	-
Cl.26.10 of IS 302-1:2008(Terminal for External Conductors )	-	500	-
Cl.26.11 of IS 302-1:2008(Terminal for External Conductors )	-	500	-
Cl.27.1 of 302-1:2008(Provision for Earthing.)	-	500	-
Cl.27.5 of 302-1:2008(Provision for Earthing.)	-	500	-
Cl.28 of 302-1:2008(Screws and Connections.)	-	500	-
Cl.29 & IS:302-1:2008(Clearances, Creepage Distances and Solid Insulation)	-	500	-
Cl.29 & IS:302-1:2008(Clearances, Creepage Distances and Solid Insulation)	-	500	-
Cl.30 & IS:302-1:2008(Resistance to Heat and Fire)	-	500	-
Cl.30.2.2 of 302-1:2008(Resistance to Heat and Fire)	-	500	-
Cl.31 & IS:302-1:2008(Resistance to Rusting.)	-	500	-
Cl.32 & IS:302-1:2008(Radition,Toxicity and similar Hazards.)	-	500	-
Cl.31 of IS:302-1:2008(Resistance to Rusting.)	-	500	-
Cl.30.2 of 302-1:2008(Resistance to Heat and Fire : Resistance to fire)	-	500	-
Cl.30.1 of IS:302-1:2008(Resistance to Heat and Fire: Resistance to heat. )	-	500	-
Cl.29.2 of IS:302-1:2008(Clearances, Creepage Distances and Solid Insulation : Creepage Distance)	-	500	-
Cl.29.1 of IS:302-1:2008(Clearances, Creepage Distances and Solid Insulation : Clearance )	-	500	-
Cl.28 of 302-1:2008(Screws and Connections.)	-	500	-
Cl.27.5 of 302-1:2008(Provision for Earthing : ECR)	-	500	-
Cl.27.1 of 302-1:2008(Provision for Earthing )	-	500	-
Cl.26 of IS 302-1:2008(Terminal for External Conductors )	-	500	-
Cl.25.20 of 302-1:2008(Supply Connection and External Flexible Cords : Additional insulation )	-	500	-
Cl.25.18 of 302-1:2008(Supply Connection and External Flexible Cords : Arrangement of cord anchorages )	-	500	-
Cl.25.15 of IS 302-1:2008(Supply Connection and External Flexible Cords : Cord grip test - displacement)	-	500	-
Cl.25.15 of IS 302-1:2008(Supply Connection and External Flexible Cords : Cord grip test - strain at terminals )	-	500	-
Cl. 25.13 of 302-1:2008(Supply Connection and External Flexible Cords : Inlet opening of supply cords )	-	500	-
Cl. 25.12 of 302-1:2008(Supply Connection and External Flexible Cords : Moulding of cords )	-	500	-
Cl.25.10 of 302-1:2008(Supply Connection and External Flexible Cords : Colour of earthing wire )	-	500	-
Cl. 25.9 of 302-1:2008(Supply Connection and External Flexible Cords : Contact with sharp edge )	-	500	-
Cl.25.8 of 302-1:2008(Supply Connection and External Flexible Cords : Resistance of supply wires )	-	500	-
Cl.25.7 of IS:302-2-30:2007(Supply Connection and External Flexible Cords : Supply cords material )	-	500	-
Cl.25.5 of 302-1:2008(Supply Connection and External Flexible Cords : Type of attachments )	-	500	-
Cl.25.1 of 302-1:2008(Supply Connection and External Flexible Cords : Means of connection )	-	500	-
Cl.23.7 of 302-1:2008(Internal Wiring : Colour of earting conductor )	-	500	-
Cl.23 of IS:302-1:2008(Internal Wiring )	-	500	-
Cl.22.106 of IS:302-2-30:2007(Construction : Checking of thermostats, timers or similar means for visibl glowing radiant heaters)	-	500	-
Cl.22.106 of IS:302-2-30:2007(Construction : Checking of openings on the underside)	-	500	-
Cl.22.102 & Cl 22.103 of IS:302-2-30:2007(Construction : Fireguard )	-	500	-
Cl.22.101 of IS:302-2-30:2007(Construction : Prevention to contact with heating element)	-	500	-
Cl.22.24 of IS:302-2-30:2007(Construction : test of bare heating element)	-	500	-
Cl.22.18 of IS 302-1:2008(Construction : Resistance to corrosion )	-	500	-
Cl.22.15 of IS 302-1:2008(Construction : Storage hooks for flexible cords)	-	500	-
Cl.22.14 of IS 302-1:2008(Construction : ragged and sharp edges)	-	500	-
Cl.22.13 of IS 302-1:2008(Construction : Position of handles )	-	500	-
Cl.22.12 of IS 302-1:2008(Construction : Fixing of Handle, knobs,grips,lever and similer parts )	-	500	-
Cl.22.11 of IS 302-1:2008(Construction : Fixing of non detachable parts )	-	500	-
Cl.22.7 of IS:302-2-30:2007(Construction : Pressure test of oil heater )	-	500	-
Cl.21.101 of IS:302-2-30:2007(Mechanical Strength : fire gaurd deformation test )	-	500	-
Cl.21.2 of IS 302-1:2008(Mechanical Strength : Pentration by sharp implementation )	-	500	-
Cl.21.1 of IS:302-1:2008)(Mechanical Strength : Rough handling )	-	500	-
Cl.20 of IS:302-2-30:2007(Stability of Mechanical Hazards)	-	500	-
Cl.19.114 of IS:302-2-30:2007(Abnormal Operation : the temp. of the surface of the container for oil heaters )	-	500	-
Cl.19.112 of IS:302-2-30:2007(Abnormal Operation : Ignition of bleached cotton gauge)	-	500	-
Cl.19.111 of IS:302-2-30:2007(Abnormal Operation : Ignition of flannelette for Visibly glowing heaters)	-	500	-
Cl.19.110 of IS:302-2-30:2007(Abnormal Operation : operation against wall for visibly glowing radiant heaters )	-	500	-
Cl.19.109 of IS:302-2-30:2007(Abnormal Operation : operation against wall for fan heater )	-	500	-
Cl.19.106 of IS:302-2-30:2007(Abnormal Operation : Locked rotor of fan hetear )	-	500	-
Cl.19.103 , Cl 19.104 of IS:302-2-30:2007(Abnormal Operation : Operation after Covering by cotton)	-	500	-
Cl.19 of IS:302-2-30:2007(Abnormal Operation : High Voltage )	-	500	-
Cl.19 of IS:302-2-30:2007(Abnormal Operation : Temp rise of test corner )	-	500	-
Cl.19 of IS:302-2-30:2007(Abnormal Operation : temp rise of supply cord )	-	500	-
Cl.19 of IS:302-1:2008(Abnormal Operation : Emission of molten or poisonous or ignitable gas)	-	500	-
Cl.16 of IS:302-1:2008(Leakage current and Electric strength (After humidity): Electric Strentgh )	-	500	-
Cl.16 of IS:302-1:2008(Leakage current and Electric strength (After humidity): Leakage current )	-	500	-
Cl.15 of IS 302-1:2008(Moisture Resistance )	-	500	-
Cl.14 of IS:302-1:2008(Transient Over Voltages)	-	500	-
Cl.13 of IS:302-1:2008(Leakage Current of Electric Strength at operating temp. )	-	500	-
Cl.13 of IS:302-1:2008(Leakage Current of Electric Strength at operating temp. )	-	500	-
Cl.11 of IS:302-2:30: 2007(Heating : Room temperature)	-	500	-
Cl.11.8 of IS:302-2:30: 2007(Heating : For liquid filled radiators the temp. rise of the outer surface of the liquid container)	-	500	-
Cl.11 of IS:302-2:30: 2007(Heating : Temperature rise in winding)	-	500	-
Cl.11 of IS:302-2:30: 2007(Heating : Air-outlet grills)	-	500	-
Cl.11 of IS:302-2:30: 2007(Heating : Surfaces of handles, knobs, grips and similar parts)	-	500	-
Cl.11 of IS:302-2:30: 2007(Heating : Wooden supports, walls, ceiling and floor of the test corner)	-	500	-
Cl.11 of IS:302-2:30: 2007(Heating : PVC Insulation )	-	500	-
Cl.10 of IS:302-1:2008(Power Input and Current)	-	500	-
Cl.8 of IS:302-1:2008(Protection Against Access to Live Parts)	-	500	-
Cl.7.101 of IS:302-2:30: 2007(Marking and Instructions : standard mark. )	-	500	-
Cl.7.15 of IS 302-1:2008(Marking and Instructions : Visibility of marking concerning covering)	-	500	-
Cl.7.15 of IS 302-1:2008(Marking and Instructions : discernibility from the out side )	-	500	-
Cl.7.14 of IS:302-2:30: 2007(Marking and Instructions : Height of “Do not cover”)	-	500	-
Cl.7.14 of IS:302-2:30: 2007(Marking and Instructions : height of symbol)	-	500	-
Cl.7.14 of IS302-1:2008(Marking and Instructions : Legibility and durability )	-	500	-
Cl.7.13 of IS 302-1:2008(Marking and Instructions : Languge of instruction and texts )	-	500	-
Cl.7.11 of IS :302-1:2008(Marking and Instructions : Controls )	-	500	-
Cl.7.9 of IS :302-1:2008(Marking and Instructions : switches )	-	500	-
Cl.7.8 of IS :302-1:2008(Marking and Instructions : terminals )	-	500	-
Cl.7.6 of IS:302-1:2008(Marking and Instructions : Symbols )	-	500	-
Cl.7.5 of IS:302-1:2008(Marking and Instructions : upper of lower limit of the rated power input )	-	500	-
Cl 7.1 & Cl.7.6 of IS:302-2:30: 2007(Marking and Instructions : Do not cover )	-	500	-
Cl.7.1 of IS:302-1:2008(Marking and Instructions : Country of manufacture )	-	500	-
Cl.7.1 of IS:302-1:2008(Marking and Instructions : Symbol for Class-II )	-	500	-
Cl.7.1 of IS:302-1:2008(Marking and Instructions : Model or type )	-	500	-
Cl.7.1 of IS:302-1:2008(Marking and Instructions : Name , trade-mark or identification mark of the manufacturer )	-	500	-
Cl.7.1 of IS:302-1:2008(Marking and Instructions : rated power input )	-	500	-
Cl.7.1 of IS:302-1:2008(Marking and Instructions : Nature of supply )	-	500	-
Cl.7.1 of IS:302-1:2008(Marking and Instructions : Rated Voltage )	-	500	-
Cl.25.6 of 302-1:2008(Supply Connection and External Flexible Cords )	-	500	-
Cl.25.17 of IS 302-1:2008(Supply Connection and External Flexible Cords )	-	500	-
Cl.24.1 of 302-1:2008(Component)	-	0	-
Cl.24.1 of 302-1:2008(Component)	-	0	-
Cl.24.1.3 (Component)	-	0	-
Cl.24.1.3 (Component)	-	0	-
Cl.24.1.3 (Component)	-	0	-
Cl.24.1.3 (Component)	-	0	-
C.24.1.4(Component)	-	0	-
C.24.2 of 302-1:2008(Component)	-	0	-
Cl.24.10(Component)	-	0	-
Cl.24 of IS:302-2-30:2007(Component)	-	0	-
19.11.4.1(Electrostatic discharges)	-	0	-
19.11.4.2(Radiated fields)	-	0	-
19.11.4.3(Fast transient bursts)	-	0	-
19.11.4.4(Surge immunity test)	-	0	-
19.11.4.5(Injected currents)	-	0	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	0	-
19.11.4.7(Harmonics)	-	0	-

04 Jul, 2027

-
Included w.e.f.17.03.2025 Exclusion Cl 19.11.4.1 to Cl 19.11.4.7 (EMI/EMC) Cl 24 (Components)

IS 302 : Part 1 (2024)

Household and Similar Electrical Appliances â Safety Part 1 General Requirements (Seventh Revision)

45000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(General requirement)	-	9500	-
5(General conditions for the tests)	-	9500	-
6(Classification- IS 302-1)	-	9500	-
7(Marking and instructions)	-	9500	-
8.1.1(Protection against live parts in all positions)	-	9500	-
8.1.2(Protection against live parts in openings)	-	9500	-
8.1.3(Protection against live parts in visible glowing heating elements)	-	9500	-
8.1.4(Protection against live parts against protective impedance)	-	9500	-
8.1.5(Live parts of built-in appliances)	-	9500	-
9(Starting of motor operation test requirements and tests)	-	9500	-
10.1(Power input)	-	9500	-
10.2(Current input)	-	9500	-
11.1(General)	-	9500	-
11.2(General)	-	9500	-
11.3(Heating)	-	9500	-
11.4(Heating appliances)	-	9500	-
11.5(Motor-operated appliances)	-	9500	-
11.6(Combined appliances)	-	9500	-
11.7(Duration corresponding)	-	9500	-
11.8(Temperature rise)	-	9500	-
12(Charging of metal-ion batteries)	-	9500	-
13(Leakage current and electric strength at operating temperature)	-	9500	-
13.2(Leakage current at operating temperature)	-	9500	-
13.3(Electric Strength at operating temperature)	-	9500	-
14(Transient Over Voltages)	-	9500	-
15.0(Moisture resistance)	-	9500	-
15.1(Ingress Protection test other than IPX0 (IP test))	-	9500	-
15.2(Spillage Test)	-	9500	-
16.1(General)	-	9500	-
16.2(Leakage Current (after Clause 15))	-	9500	-
16.3(Electric Strength (after clause 15 and 16.2))	-	9500	-
16(Leakage current and electric strength)	-	9500	-
15.2(Moisture resistance)	-	9500	-
16.0(General)	-	9500	-
17(Overload protection of transformers and associated circuits)	-	9500	-
18(Endurance)	-	9500	-
19(Abnormal Operation)	-	9500	-
20.1(Stability & Mechanical Hazards, IS 302-1)	-	9500	-
20.2(Stability & Mechanical Hazards, IS 302-1)	-	9500	-
21.1(Mechanical Strength, IS 302-1)	-	9500	-
21.2(Mechanical Strength, IS 302-1)	-	9500	-
21.3(Mechanical Strength, IS 302-1)	-	9500	-
22.1(Construction, IS 302-1)	-	9500	-
22.5(Construction)	-	9500	-
22.6(Construction, IS 302-1)	-	9500	-
22.11(Construction, IS 302-1)	-	9500	-
22.16(Construction)	-	9500	-
22.32(Construction, IS 302-1)	-	9500	-
22.42(Construction)	-	9500	-
23.1(Internal Wiring, IS 302-1)	-	9500	-
23.3(Internal Wiring, IS 302-1)	-	9500	-
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	9500	-
25.7(Supply Connection and External Flexible Cords, IS 302-1)	-	9500	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	9500	-
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	9500	-
26(Terminals for external conductors)	-	9500	-
26.5(Terminals for external conductors)	-	9500	-
27.1(Provision for Earthing, IS 302-1)	-	9500	-
27.5(Provision for Earthing, IS 302-1)	-	9500	-
28(Screw test and connections)	-	9500	-
28.1(Screws and connections)	-	9500	-
29(clearance, creepage distances and solid insulation)	-	9500	-
30.1(Ball pressure test)	-	9500	-
30.2(Glow Wire Test)	-	9500	-
30.2(Needle Flame Test)	-	9500	-
31(Resistance to Rusting)	-	9500	-
32.1(Radiation Toxicity and Similar Hazards)	-	9500	-
22.2(Construction, IS 302-1)	-	9500	-
22.3(Construction, IS 302-1)	-	9500	-
B.22.4(Construction, IS 302-1)	-	9500	-
B.22.5(Construction, IS 302-1)	-	9500	-
A.2(Earth continuity test)	-	9500	-
Annex C(Ageing test on motors)	-	9500	-
Annex D(Thermal motor protectors)	-	9500	-
15.3(Humidity Test)	-	9500	-
19.17(Abnormal Operation, IS 302-1)	-	9500	-
25.6(Supply connection and external flexible cords, IS 302-1)	-	9500	-
18(Endurance)	-	9500	-
17(Over Load Protection of Transformers and associated circuits)	-	9500	-
4(General requirement)	-	9500	-
5(General conditions for the tests)	-	9500	-
6(Classification- IS 302-1)	-	9500	-
7(Marking and instructions)	-	9500	-
8.1.1(Protection against live parts in all positions)	-	9500	-
8.1.2(Protection against live parts in openings)	-	9500	-
8.1.3(Protection against live parts in visible glowing heating elements)	-	9500	-
8.1.4(Protection against live parts against protective impedance)	-	9500	-
8.1.5(Live parts of built-in appliances)	-	9500	-
9(Starting of motor operation test requirements and tests)	-	9500	-
10.1(Power input)	-	9500	-
10.2(Current input)	-	9500	-
11.1(General)	-	9500	-
11.2(General)	-	9500	-
11.3(Heating)	-	9500	-
11.4(Heating appliances)	-	9500	-
11.5(Motor-operated appliances)	-	9500	-
11.6(Combined appliances)	-	9500	-
11.7(Duration corresponding)	-	9500	-
11.8(Temperature rise)	-	9500	-
12(Charging of metal-ion batteries)	-	9500	-
13(Leakage current and electric strength at operating temperature)	-	9500	-
13.2(Leakage current at operating temperature)	-	9500	-
13.3(Electric Strength at operating temperature)	-	9500	-
14(Transient Over Voltages)	-	9500	-
15.0(Moisture resistance)	-	9500	-
15.1(Ingress Protection test other than IPX0 (IP test))	-	9500	-
15.2(Spillage Test)	-	9500	-
16.1(General)	-	9500	-
16.2(Leakage Current (after Clause 15))	-	9500	-
16.3(Electric Strength (after clause 15 and 16.2))	-	9500	-
16(Leakage current and electric strength)	-	9500	-
15.2(Moisture resistance)	-	9500	-
16.0(General)	-	9500	-
17(Overload protection of transformers and associated circuits)	-	9500	-
18(Endurance)	-	9500	-
19(Abnormal Operation)	-	9500	-
20.1(Stability & Mechanical Hazards, IS 302-1)	-	9500	-
20.2(Stability & Mechanical Hazards, IS 302-1)	-	9500	-
21.1(Mechanical Strength, IS 302-1)	-	9500	-
21.2(Mechanical Strength, IS 302-1)	-	9500	-
21.3(Mechanical Strength, IS 302-1)	-	9500	-
22.1(Construction, IS 302-1)	-	9500	-
22.5(Construction)	-	9500	-
22.6(Construction, IS 302-1)	-	9500	-
22.11(Construction, IS 302-1)	-	9500	-
22.16(Construction)	-	9500	-
22.32(Construction, IS 302-1)	-	9500	-
22.42(Construction)	-	9500	-
23.1(Internal Wiring, IS 302-1)	-	9500	-
23.3(Internal Wiring, IS 302-1)	-	9500	-
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	9500	-
25.7(Supply Connection and External Flexible Cords, IS 302-1)	-	9500	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	9500	-
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	9500	-
26(Terminals for external conductors)	-	9500	-
26.5(Terminals for external conductors)	-	9500	-
27.1(Provision for Earthing, IS 302-1)	-	9500	-
27.5(Provision for Earthing, IS 302-1)	-	9500	-
28(Screw test and connections)	-	9500	-
28.1(Screws and connections)	-	9500	-
29(clearance, creepage distances and solid insulation)	-	9500	-
30.1(Ball pressure test)	-	9500	-
30.2(Glow Wire Test)	-	9500	-
30.2(Needle Flame Test)	-	9500	-
31(Resistance to Rusting)	-	9500	-
32.1(Radiation Toxicity and Similar Hazards)	-	9500	-
22.2(Construction, IS 302-1)	-	9500	-
22.3(Construction, IS 302-1)	-	9500	-
B.22.4(Construction, IS 302-1)	-	9500	-
B.22.5(Construction, IS 302-1)	-	9500	-
A.2(Earth continuity test)	-	9500	-
Annex C(Ageing test on motors)	-	9500	-
Annex D(Thermal motor protectors)	-	9500	-
15.3(Humidity Test)	-	9500	-
19.17(Abnormal Operation, IS 302-1)	-	9500	-
25.6(Supply connection and external flexible cords, IS 302-1)	-	9500	-
18(Endurance)	-	9500	-
17(Over Load Protection of Transformers and associated circuits)	-	9500	-

04 Jul, 2027

-
Included w.e.f.17.03.2025 Exclusion Cl 19.11.4.1 to Cl 19.11.4.7 (EMI/EMC) Cl 24 (Components) "Domestic Electric Clothes Washing Machines (For testing charges please refer part 2 standard in LIMS)"

IS 302 : Part 2 : Sec 74 (2024)

Household and Similar Electrical Appliancesï¿½Safety Part 2 Particular Requirements Section 74 Portable immersion heaters

14500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking and instructions)	-	1000	-
8(Protection against access to live parts)	-	1000	-
10(Power input and current)	-	1000	-
10(Power input and current)	-	1000	-
11(Heating)	-	1000	-
13.1 &13.2(Leakage current test)	-	1000	-
13.1 &13.3(Electric strength test)	-	1000	-
14(Transient overvoltages)	-	1000	-
15(Moisture resistance)	-	1000	-
15.3(Moisture resistance)	-	2500	-
16.1 &16.2(Leakage current test)	-	1000	-
16.1 & 16.3(Electric strength test)	-	1000	-
17(Overload protection of transformers and associated circuits)	-	1000	-
19.1 to 19.13, Table No. - 9(Abnormal operation)	-	1000	-
20.1(Stability and mechanical hazards)	-	1000	-
20.2(Stability and mechanical hazards)	-	1000	-
21(Mechanical strength)	-	1000	-
22(Construction)	-	1000	-
23(Internal wiring)	-	1000	-
25("Supply connection and external flexible cords")	-	1000	-
26("Terminals for external conductors")	-	1000	-
27(Provision for earthing)	-	1000	-
28(Screws and connections)	-	1000	-
29("Clearances, creepage distances and solid insulation")	-	1000	-
30(Resistance to heat and fire)	-	1000	-
30.101(Resistance to heat and fire)	-	1000	-
31(Resistance to rusting)	-	1000	-
32("Radiation, toxicity and similar hazards")	-	1000	-

04 Jul, 2027

-
Included w.e.f 11.02.2025 Exclusion : Cl 19.11.4.1 To Cl 19.11.4.8 (EMI/EMC), Cl 24 (Components)

IS 368 (2014)

Electric immersion water heaters - Specification (Fifth Revision)

14500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.6 of IS 302-‐2-‐201:2008(Classification)	-	1000	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	1000	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	1000	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	1000	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	1000	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	1000	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	1000	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	1000	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	1000	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	1000	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	1000	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	1000	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	1000	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	1000	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	1000	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	1000	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	1000	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	1000	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	1000	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	1000	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	1000	-
Cl.8 of IS 302‐2-201: 2008(Protection Against Access to Live Parts)	-	1000	-
Cl.10 of IS 302‐2‐201:2008(Power Input and Current )	-	1000	-
Cl.11 of IS 302-2201: 2008(Heating)	-	1000	-
Cl.11 of IS 302-2201: 2008(Heating)	-	1000	-
Cl.11 of IS 302-2201: 2008(Heating)	-	1000	-
Cl.11 of IS 302-2201: 2008(Heating)	-	1000	-
Cl.11 of IS 302-2201: 2008(Heating)	-	1000	-
Cl.11 of IS 302-2201: 2008(Heating)	-	1000	-
Cl.11 of IS 302-2201: 2008(Heating)	-	1000	-
Cl.11 of IS 302-2201: 2008(Heating)	-	1000	-
Cl.11 of IS 302-2201: 2008(Heating)	-	1000	-
Cl.11 of IS 302-2201: 2008(Heating)	-	1000	-
Cl.11 of IS 302-2201: 2008(Heating)	-	1000	-
Cl. 12 of IS 368:2014(Operation under overload conditions of appliances with heating elements)	-	1000	-
Cl.13 of IS 302-2-201: 2008(Leakage Current & Electric Strength at Operating Temperature)	-	1000	-
Cl.13 of IS 302-2-201: 2009(Leakage Current & Electric Strength at Operating Temperature)	-	1000	-
Cl.14 of IS 302‐2-201:2008(Transient Over Voltages )	-	1000	-
Cl.15 of IS 302-2-201:2008(Moisture Resistance )	-	2500	-
Cl.15 of IS 302-2-201:2008(Moisture Resistance )	-	2500	-
Cl.16 of IS 302-2-201:2008(Leakage Current & Electric Strength)	-	1000	-
Cl.16 of IS 302-2-201:2008(Leakage Current & Electric Strength)	-	1000	-
Cl.17 of IS 302‐2-201: 2008(Overload Protection of Transformers & Associated Circuits)	-	1000	-
Cl.18 of IS 368:2014(Endurance)	-	5000	-
Cl.19 of IS 302‐2-201: 2008(Abnormal Operation )	-	1000	-
Cl.19 of IS 302‐2-201: 2008(Abnormal Operation )	-	1000	-
Cl.19 of IS 302‐2-201: 2008(Abnormal Operation )	-	1000	-
Cl.19 of IS 302‐2-201: 2008(Abnormal Operation )	-	1000	-
Cl.20 of IS 302-2-201: 2008(Stability & Mechanical Hazards)	-	1000	-
Cl.21 of IS 302-2-201: 2008(Mechanical Strength )	-	1000	-
Cl.21 of IS 302-2-201: 2008(Mechanical Strength )	-	1000	-
Cl.21 of IS 302-2-201: 2008(Mechanical Strength )	-	1000	-
Cl.22 of IS 302-2-201: 2008(Construction)	-	1000	-
Cl.22 of IS 302-2-201: 2008(Construction)	-	1000	-
Cl.22 of IS 302-2-201: 2008(Construction)	-	1000	-
Cl.22 of IS 302-2-201: 2008(Construction)	-	1000	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	1000	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	1000	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	1000	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	1000	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	1000	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	1000	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	1000	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	1000	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.26 of IS 302-2-201: 2008(Terminals for External Conductors)	-	1000	-
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	1000	-
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	1000	-
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	1000	-
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	1000	-
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	1000	-
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	1000	-
Cl.28 of IS 302-2-201: 2008(Screws & Connections )	-	1000	-
Cl.29 of IS 302-2‐201:2008(Clearances, Creepage Distances and Solid Insulation )	-	1000	-
Cl.29 of IS 302-2‐201:2008(Clearances, Creepage Distances and Solid Insulation )	-	1000	-
Cl.30 of IS 302-2‐201:2008(Resistance to Heat and Fire )	-	1000	-
Cl.30 of IS 302-2‐201:2008(Resistance to Heat and Fire )	-	1000	-
Cl.31 of IS 302-2-201:2008(Resistance of Rusting )	-	1000	-
Cl.32 of IS 302-2-201:2008(Radiation, Toxicity and Similar Hazards)	-	1000	-
4(GENERAL REQUIREMENT)	-	1000	-
5(GENERAL CONDITIONS FOR THE TESTS)	-	1000	-
Cl.19 of IS 302‐2-201: 2008(Abnormal Operation )	-	1000	-

04 Jul, 2027

-
Included w.e.f 11.02.2025 Exclusion : Cl 19.11.4.1 to Cl 19.11.4.7 (EMI/EMC), Cl 24 Component

IS 302 : Part 2 : Sec 201 (2008)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 201 electric immersion water heaters (First Revision)

14500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.6 of IS 302-‐2-‐201:2008(Classification)	-	1000	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	1000	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	1000	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	1000	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	1000	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	1000	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	1000	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	1000	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	1000	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	1000	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	1000	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	1000	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	1000	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	1000	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	1000	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	1000	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	1000	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	1000	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	1000	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	1000	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	1000	-
Cl.8 of IS 302‐2-201: 2008(Protection Against Access to Live Parts)	-	1000	-
Cl.10 of IS 302‐2‐201:2008(Power Input and Current )	-	1000	-
Cl.11 of IS 302-2201: 2008(Heating)	-	1000	-
Cl.11 of IS 302-2201: 2008(Heating)	-	1000	-
Cl.11 of IS 302-2201: 2008(Heating)	-	1000	-
Cl.11 of IS 302-2201: 2008(Heating)	-	1000	-
Cl.11 of IS 302-2201: 2008(Heating)	-	1000	-
Cl.11 of IS 302-2201: 2008(Heating)	-	1000	-
Cl.11 of IS 302-2201: 2008(Heating)	-	1000	-
Cl.11 of IS 302-2201: 2008(Heating)	-	1000	-
Cl.11 of IS 302-2201: 2008(Heating)	-	1000	-
Cl.11 of IS 302-2201: 2008(Heating)	-	1000	-
Cl.11 of IS 302-2201: 2008(Heating)	-	1000	-
Cl.13 of IS 302-2-201: 2008(Leakage Current & Electric Strength at Operating Temperature)	-	1000	-
Cl.14 of IS 302‐2-201:2008(Transient Over Voltages )	-	1000	-
Cl.15 of IS 302-2-201:2008(Moisture Resistance )	-	2500	-
Cl.15 of IS 302-2-201:2008(Moisture Resistance )	-	2500	-
Cl.16 of IS 302-2-201:2008(Leakage Current & Electric Strength)	-	1000	-
Cl.16 of IS 302-2-201:2008(Leakage Current & Electric Strength)	-	1000	-
Cl.17 of IS 302‐2-201: 2008(Overload Protection of Transformers & Associated Circuits)	-	1000	-
Cl.19 of IS 302‐2-201: 2008(Abnormal Operation )	-	1000	-
Cl.19 of IS 302‐2-201: 2008(Abnormal Operation )	-	1000	-
Cl.19 of IS 302‐2-201: 2008(Abnormal Operation )	-	1000	-
Cl.19 of IS 302‐2-201: 2008(Abnormal Operation )	-	1000	-
Cl.20 of IS 302-2-201: 2008(Stability & Mechanical Hazards)	-	1000	-
Cl.21 of IS 302-2-201: 2008(Mechanical Strength )	-	1000	-
Cl.21 of IS 302-2-201: 2008(Mechanical Strength )	-	1000	-
Cl.21 of IS 302-2-201: 2008(Mechanical Strength )	-	1000	-
Cl.22 of IS 302-2-201: 2008(Construction)	-	1000	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	1000	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	1000	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	1000	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	1000	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	1000	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	1000	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	1000	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	1000	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.26 of IS 302-2-201: 2008(Terminals for External Conductors)	-	1000	-
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	1000	-
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	1000	-
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	1000	-
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	1000	-
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	1000	-
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	1000	-
Cl.28 of IS 302-2-201: 2008(Screws & Connections )	-	1000	-
Cl.29 of IS 302-2‐201:2008(Clearances, Creepage Distances and Solid Insulation )	-	1000	-
Cl.30 of IS 302-2‐201:2008(Resistance to Heat and Fire )	-	1000	-
Cl.31 of IS 302-2-201:2008(Resistance of Rusting )	-	1000	-
Cl.32 of IS 302-2-201:2008(Radiation, Toxicity and Similar Hazards)	-	1000	-
4(GENERAL REQUIREMENTS)	-	1000	-
5(GENERAL CONDITIONS FOR THE TESTS)	-	1000	-
Cl.6 of IS 302-‐2-‐201:2008(Classification)	-	1000	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	1000	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	1000	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	1000	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	1000	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	1000	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	1000	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	1000	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	1000	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	1000	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	1000	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	1000	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	1000	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	1000	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	1000	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	1000	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	1000	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	1000	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	1000	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	1000	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	1000	-
Cl.8 of IS 302‐2-201: 2008(Protection Against Access to Live Parts)	-	1000	-
Cl.10 of IS 302‐2‐201:2008(Power Input and Current )	-	1000	-
Cl.11 of IS 302-2201: 2008(Heating)	-	1000	-
Cl.11 of IS 302-2201: 2008(Heating)	-	1000	-
Cl.11 of IS 302-2201: 2008(Heating)	-	1000	-
Cl.11 of IS 302-2201: 2008(Heating)	-	1000	-
Cl.11 of IS 302-2201: 2008(Heating)	-	1000	-
Cl.11 of IS 302-2201: 2008(Heating)	-	1000	-
Cl.11 of IS 302-2201: 2008(Heating)	-	1000	-
Cl.11 of IS 302-2201: 2008(Heating)	-	1000	-
Cl.11 of IS 302-2201: 2008(Heating)	-	1000	-
Cl.11 of IS 302-2201: 2008(Heating)	-	1000	-
Cl.11 of IS 302-2201: 2008(Heating)	-	1000	-
Cl.13 of IS 302-2-201: 2008(Leakage Current & Electric Strength at Operating Temperature)	-	1000	-
Cl.14 of IS 302‐2-201:2008(Transient Over Voltages )	-	1000	-
Cl.15 of IS 302-2-201:2008(Moisture Resistance )	-	1000	-
Cl.15 of IS 302-2-201:2008(Moisture Resistance )	-	1000	-
Cl.16 of IS 302-2-201:2008(Leakage Current & Electric Strength)	-	1000	-
Cl.16 of IS 302-2-201:2008(Leakage Current & Electric Strength)	-	1000	-
Cl.17 of IS 302‐2-201: 2008(Overload Protection of Transformers & Associated Circuits)	-	1000	-
Cl.19 of IS 302‐2-201: 2008(Abnormal Operation )	-	1000	-
Cl.19 of IS 302‐2-201: 2008(Abnormal Operation )	-	1000	-
Cl.19 of IS 302‐2-201: 2008(Abnormal Operation )	-	1000	-
Cl.19 of IS 302‐2-201: 2008(Abnormal Operation )	-	1000	-
Cl.20 of IS 302-2-201: 2008(Stability & Mechanical Hazards)	-	1000	-
Cl.21 of IS 302-2-201: 2008(Mechanical Strength )	-	1000	-
Cl.21 of IS 302-2-201: 2008(Mechanical Strength )	-	1000	-
Cl.21 of IS 302-2-201: 2008(Mechanical Strength )	-	1000	-
Cl.22 of IS 302-2-201: 2008(Construction)	-	1000	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	1000	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	1000	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	1000	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	1000	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	1000	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	1000	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	1000	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	1000	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.26 of IS 302-2-201: 2008(Terminals for External Conductors)	-	1000	-
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	1000	-
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	1000	-
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	1000	-
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	1000	-
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	1000	-
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	1000	-
Cl.28 of IS 302-2-201: 2008(Screws & Connections )	-	1000	-
Cl.29 of IS 302-2‐201:2008(Clearances, Creepage Distances and Solid Insulation )	-	1000	-
Cl.30 of IS 302-2‐201:2008(Resistance to Heat and Fire )	-	1000	-
Cl.31 of IS 302-2-201:2008(Resistance of Rusting )	-	1000	-
Cl.32 of IS 302-2-201:2008(Radiation, Toxicity and Similar Hazards)	-	1000	-
4(GENERAL REQUIREMENTS)	-	1000	-
5(GENERAL CONDITIONS FOR THE TESTS)	-	1000	-

04 Jul, 2027

-
Included.w.e.f.24.01.2025 Exclusion Cl 19.11.4.1 to Cl 19.11.4.7 (EMC/EMI), Cl 24 (component)

IS 8978 (1992)

Specification for electric instantaneous water heaters (Second Revision)

20000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.7 of IS 302-2-35:2017(Marking)	-	500	-
Cl.7 of IS 302-2-35:2017(Marking)	-	500	-
Cl.7 of IS 302-2-35:2017(Marking)	-	500	-
Cl.7 of IS 302-2-35:2017(Marking)	-	500	-
Cl.7 of IS 302-2-35:2017(Marking)	-	500	-
Cl.7 of IS 302-2-35:2017(Marking)	-	500	-
Cl.7 of IS 302-2-35:2017(Marking)	-	500	-
Cl.7 of IS 302-2-35:2017(Marking)	-	500	-
Cl.7 of IS 302-2-35:2017(Marking)	-	500	-
Cl.7 of IS 302-2-35:2017(Marking)	-	500	-
Cl.7 of IS 302-2-35:2017(Marking)	-	500	-
Cl.7 of IS 302-2-35:2017(Marking)	-	500	-
Cl.7 of IS 302-2-35:2017(Marking)	-	500	-
Cl.7 of IS 302-2-35:2017(Marking)	-	500	-
Cl.7 of IS 302-2-35:2017(Marking)	-	500	-
Cl.7 of IS 302-2-35:2017(Marking)	-	500	-
Cl.7 of IS 302-2-35:2017(Marking)	-	500	-
Cl.7 of IS 302-2-35:2017(Marking)	-	500	-
Cl.7 of IS 302-2-35:2017(Marking)	-	500	-
Cl.7 of IS 302-2-35:2017(Marking)	-	500	-
Cl.7 of IS 302-2-35:2017(Marking)	-	500	-
Cl.7 of IS 302-2-35:2017(Marking)	-	500	-
Cl.7 of IS 302-2-35:2017(Marking)	-	500	-
Cl.7 of IS 302-2-35:2017(Marking)	-	500	-
Cl.7 of IS 302-2-35:2017(Marking)	-	500	-
Cl.6 of IS 302-2-35:2017(Classification)	-	500	-
Cl.6 of IS 302-2-35:2017(Classification)	-	500	-
Cl.8 of IS 302-2-35:2017(Protection Against Access To Live Parts)	-	500	-
Cl.10 of IS 302-2- 35:2011(Power Input & Current )	-	500	-
Cl.11 of 302-2-35:2017(Heating)	-	500	-
Cl.11 of 302-2-35:2017(Heating)	-	500	-
Cl.11 of 302-2-35:2017(Heating)	-	500	-
Cl.11 of 302-2-35:2017(Heating)	-	500	-
Cl.13 of IS 302-2-35:2017(Leakage Current & Electrical Strength at Operating Temperature )	-	500	-
Cl.13 of IS 302-2-35:2017(Leakage Current & Electrical Strength at Operating Temperature )	-	500	-
Cl.14 of IS 302-2-35:2017(Transient Over Voltages )	-	500	-
Cl.15 of IS 302-2-35-2011(Moisture Resistance )	-	500	-
Cl.15 of IS 302-2-35-2011(Moisture Resistance )	-	500	-
Cl.16 of IS 302-2-35:2011(Leakage Current and Electric Strength)	-	500	-
Cl.16 of IS 302-2-35:2011(Leakage Current and Electric Strength)	-	500	-
Cl.17 IS 302-2-35:2017(Overload Protection of Transformers & Associated circuits )	-	500	-
Cl.19 of IS 302-2-35:2017(Abnormal Operation)	-	500	-
Cl.19 of IS 302-2-35:2017(Abnormal Operation)	-	500	-
Cl.19 of IS 302-2-35:2017(Abnormal Operation)	-	500	-
Cl.19 of IS 302-2-35:2017(Abnormal Operation)	-	500	-
Cl.19 of IS 302-2-35:2017(Abnormal Operation)	-	500	-
Cl.20 of IS 302-2-35-2011(Stability & Mechanical Hazards )	-	500	-
Cl.21.1 of IS 302-2-35-2011(Mechanical strength)	-	500	-
Cl. 21.2 of IS 302-1:2008(Mechanical strength)	-	500	-
Cl.22 of IS 302-2-35-2011(Construction )	-	500	-
Cl.22 of IS 302-2-35-2011(Construction )	-	500	-
Cl.22 of IS 302-2-35-2011(Construction )	-	500	-
Cl.22 of IS 302-2-35-2011(Construction )	-	500	-
Cl.22 of IS 302-2-35-2011(Construction )	-	500	-
Cl.22 of IS 302-2-35-2011(Construction )	-	500	-
Cl.22 of IS 302-2-35-2011(Construction )	-	500	-
Cl.22 of IS 302-2-35-2011(Construction )	-	500	-
Cl.22 of IS 302-2-35-2011(Construction )	-	500	-
Cl.22 of IS 302-2-35-2011(Construction )	-	500	-
Cl.22 of IS 302-2-35-2011(Construction )	-	500	-
Cl.22 of IS 302-2-35-2011(Construction )	-	500	-
Cl.22 of IS 302-2-35-2011(Construction )	-	500	-
Cl.22 of IS 302-2-35-2011(Construction )	-	500	-
Cl.22 of IS 302-2-35-2011(Construction )	-	500	-
Cl.22 of IS 302-2-35-2011(Construction )	-	500	-
Cl.22 of IS 302-2-35-2011(Construction )	-	500	-
Cl.22 of IS 302-2-35-2011(Construction )	-	500	-
Cl.22 of IS 302-2-35-2011(Construction )	-	500	-
Cl.22 of IS 302-2-35-2011(Construction )	-	500	-
Cl.22 of IS 302-2-35-2011(Construction )	-	500	-
Cl.22 of IS 302-2-35-2011(Construction )	-	500	-
Cl.22 of IS 302-2-35-2011(Construction )	-	500	-
Cl.22 of IS 302-2-35-2011(Construction )	-	500	-
Cl.22 of IS 302-2-35-2011(Construction )	-	500	-
Cl.22 of IS 302-2-35-2011(Construction )	-	500	-
Cl.22 of IS 302-2-35-2011(Construction )	-	500	-
Cl.22 of IS 302-2-35-2011(Construction )	-	500	-
Cl.22 of IS 302-2-35-2011(Construction )	-	500	-
Cl.22 of IS 302-2-35-2011(Construction )	-	500	-
Cl.22 of IS 302-2-35-2011(Construction )	-	500	-
Cl.22 of IS 302-2-35-2011(Construction )	-	500	-
Cl.22 of IS 302-2-35-2011(Construction )	-	500	-
Cl.22 of IS 302-2-35-2011(Construction )	-	500	-
Cl.22 of IS 302-2-35-2011(Construction )	-	500	-
Cl.22 of IS 302-2-35-2011(Construction )	-	500	-
Cl.22 of IS 302-2-35-2011(Construction )	-	500	-
Cl.22 of IS 302-2-35-2011(Construction )	-	500	-
Cl.22 of IS 302-2-35-2011(Construction )	-	500	-
Cl.22 of IS 302-2-35-2011(Construction )	-	500	-
Cl.22 of IS 302-2-35-2011(Construction )	-	500	-
Cl.22 of IS 302-2-35-2011(Construction )	-	500	-
Cl.22 of IS 302-2-35-2011(Construction )	-	500	-
Cl.22 of IS 302-2-35-2011(Construction )	-	500	-
Cl.22 of IS 302-2-35-2011(Construction )	-	500	-
Cl.22 of IS 302-2-35-2011(Construction )	-	500	-
Cl.22 of IS 302-2-35-2011(Construction )	-	500	-
Cl.22 of IS 302-2-35-2011(Construction )	-	500	-
Cl.22 of IS 302-2-35-2011(Construction )	-	500	-
Cl.22 of IS 302-2-35-2011(Construction )	-	500	-
Cl.22 of IS 302-2-35-2011(Construction )	-	500	-
Cl.22 of IS 302-2-35-2011(Construction )	-	500	-
Cl.22 of IS 302-2-35-2011(Construction )	-	500	-
Cl.22 of IS 302-2-35-2011(Construction )	-	500	-
Cl.22 of IS 302-2-35-2011(Construction )	-	500	-
Cl.22 of IS 302-2-35-2011(Construction )	-	500	-
Cl.22 of IS 302-2-35-2011(Construction )	-	500	-
Cl.22 of IS 302-2-35-2011(Construction )	-	500	-
Cl.23 of IS 302-2-35-2011(Internal Wiring)	-	500	-
Cl.23 of IS 302-2-35-2011(Internal Wiring)	-	500	-
Cl.23 of IS 302-2-35-2011(Internal Wiring)	-	500	-
Cl.23 of IS 302-2-35-2011(Internal Wiring)	-	500	-
Cl.23 of IS 302-2-35-2011(Internal Wiring)	-	500	-
Cl.23 of IS 302-2-35-2011(Internal Wiring)	-	500	-
Cl.23 of IS 302-2-35-2011(Internal Wiring)	-	500	-
Cl.23 of IS 302-2-35-2011(Internal Wiring)	-	500	-
Cl.23 of IS 302-2-35-2011(Internal Wiring)	-	500	-
Cl.23 of IS 302-2-35-2011(Internal Wiring)	-	500	-
Cl.23 of IS 302-2-35-2011(Internal Wiring)	-	500	-
Cl.23 of IS 302-2-35-2011(Internal Wiring)	-	500	-
Cl.23 of IS 302-2-35-2011(Internal Wiring)	-	500	-
Cl.23 of IS 302-2-35-2011(Internal Wiring)	-	500	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	500	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	500	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	500	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	500	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	500	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	500	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	500	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	500	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	500	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	500	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	500	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	500	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	500	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	500	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	500	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	500	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	500	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	500	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	500	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	500	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	500	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	500	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	500	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	500	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	500	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	500	-
Cl.26 of IS 302-2-35:2017(Terminals for External Conductors)	-	500	-
Cl.26 of IS 302-2-35:2017(Terminals for External Conductors)	-	500	-
Cl.26 of IS 302-2-35:2017(Terminals for External Conductors)	-	500	-
Cl.26 of IS 302-2-35:2017(Terminals for External Conductors)	-	500	-
Cl.26 of IS 302-2-35:2017(Terminals for External Conductors)	-	500	-
Cl.26 of IS 302-2-35:2017(Terminals for External Conductors)	-	500	-
Cl.26 of IS 302-2-35:2017(Terminals for External Conductors)	-	500	-
Cl.26 of IS 302-2-35:2017(Terminals for External Conductors)	-	500	-
Cl.26 of IS 302-2-35:2017(Terminals for External Conductors)	-	500	-
Cl.26 of IS 302-2-35:2017(Terminals for External Conductors)	-	500	-
Cl.26 of IS 302-2-35:2017(Terminals for External Conductors)	-	500	-
Cl.27 of IS 302-2-35:2017(Provision for Earthing)	-	500	-
Cl.27 of IS 302-2-35:2017(Provision for Earthing)	-	500	-
Cl.27 of IS 302-2-35:2017(Provision for Earthing)	-	500	-
Cl.27 of IS 302-2-35:2017(Provision for Earthing)	-	500	-
Cl.27 of IS 302-2-35:2017(Provision for Earthing)	-	500	-
Cl.27 of IS 302-2-35:2017(Provision for Earthing)	-	500	-
Cl.27 of IS 302-2-35:2017(Provision for Earthing)	-	500	-
Cl.28 of IS 302-2-35:2017(Screws and Connections )	-	500	-
Cl.29 of IS 302-2-35:2017(Clearances, Creepage Distances and Solid Insulation)	-	500	-
Cl.29 of IS 302-2-35:2017(Clearances, Creepage Distances and Solid Insulation)	-	500	-
Cl.29 of IS 302-2-35:2017(Clearances, Creepage Distances and Solid Insulation)	-	500	-
Cl.30 of IS 302-2-35: 2011(Resistance to Heat and Fire)	-	500	-
Cl.30 of IS 302-2-35: 2011(Resistance to Heat and Fire)	-	500	-
Cl.31 of IS 302-2-35: 2011(Resistance to Rusting )	-	500	-
Cl.32 of IS 302-2-35: 2011(Radiation, Toxicity and Similar Hazards )	-	500	-
Cl.10 of IS 8978 : 1992(Finish)	-	1000	-
Cl.11 of IS 8978 : 1992(Operation of flow switch)	-	1000	-
Cl.12 of IS 8978 : 1992(Endurance)	-	1000	-
Cl.12 of IS 8978 : 1992(Endurance)	-	1000	-
Cl.10 of IS 8978 : 1992(Finish)	-	1000	-
Cl.31 of IS 302-2-35: 2017(Resistance to Rusting )	-	500	-
Cl.30.2 of IS 302-1:2008(Resistance to Heat and Fire)	-	500	-
Cl.30.1 of IS 302-1:2008(Resistance to Heat and Fire)	-	500	-
Cl.29.2 of IS 302-2-35:2017(Clearances, Creepage Distances and Solid Insulation : Creepage distance )	-	500	-
Cl.29.1 of IS 302-2-35:2017(Clearances, Creepage Distances and Solid Insulation : Clearance distance )	-	500	-
Cl.28 of IS 302-2-35:2017(Screws and Connections )	-	500	-
Cl.27.5 of IS 302-2-35:2017(Provision for Earthing : ECR )	-	500	-
Cl.27 of IS 302-2-35:2017(Provision for Earthing)	-	500	-
Cl.26 of IS 302-2-35:2017(Terminals for External Conductors)	-	500	-
Cl.25.18 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	500	-
Cl.25.15 of IS 302-2-35:2017(Supply Connection & External Flexible Cords : Cord grip test - displacement )	-	500	-
Cl.25.15 of IS 302-2-35:2017(Supply Connection & External Flexible Cords : Cord grip test )	-	500	-
Cl.25.12 of IS 302-2-35:2017(Supply Connection & External Flexible Cords : Moulding of supply cord )	-	500	-
Cl.25.10 of IS 302-2-35:2017(Supply Connection & External Flexible Cords : Colour of Earthing conductor )	-	500	-
Cl.25.8 of IS 302-2-35:2017(Supply Connection & External Flexible Cords : Resistance of supply cord )	-	500	-
Cl.25.5 of IS 302-2-35:2017(Supply Connection & External Flexible Cords : Type of attachment )	-	500	-
Cl.25.1 of IS 302-2-35:2017(Supply Connection & External Flexible Cords : connection to the supply mains)	-	500	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	500	-
Cl.23 of IS 302-2-35:2017(Internal Wiring ; Colour of earthing conductor)	-	500	-
Cl.23 of IS 302-2-35:2017(Internal Wiring)	-	500	-
Cl.22.110 of IS 302-2-35:2017(Construction : Provision for fixing to wall )	-	500	-
Cl.22.109 of IS 302-2-35:2017(Construction : Operation of presure switch of open outlet water heater )	-	500	-
Cl.22.108 of IS 302-2-35:2017(Construction : Temperature of outlet water intended to supply for showring )	-	500	-
Cl.22.107 of IS 302-2-35:2017(Construction : Temperature of outlet )	-	500	-
Cl.22.106 of IS 302-2-35:2017(Construction : Operation of thermal cut out for closed water heater )	-	500	-
Cl.22.104 of IS 302-2-35:2017(Construction : Pressure in open outlet water heaters )	-	500	-
Cl.22.103 of IS 302-2-35:2017(Construction : Pressure relief device operation for closed water heater )	-	500	-
Cl.22.102 of IS 302-2-35:2017(Construction : excessive temperature of outlet )	-	500	-
Cl.22.101 of IS 302-2-35:2017(Construction : Rated pressure of closed water heater )	-	500	-
Cl.22.47 of IS 302-2-35:2017(Construction : Water pressure test )	-	500	-
Cl.22.44 of IS 302-1:2008(Construction : Shape and decoration )	-	500	-
Cl.22.34, Cl 22.35 of IS 302-1:2008(Construction : Shaft of operating Knobs )	-	500	-
Cl.22.33 of IS 302-1:2008(Construction : Direct contact of liquids )	-	500	-
Cl 22.26 ,Cl.22.28, Cl 22.29, Cl 22.30 , Cl 22.31, Cl 22.32 of IS 302-1:2008(Construction : Supplymentry/ double / reinforced insulation for Class II/ Class III appliance )	-	500	-
Cl.22.18 of IS 302-1:2008(Construction : Resistance to corrosion )	-	500	-
Cl.22.17 of IS 302-1:2008(Construction : Spacers )	-	500	-
Cl.22.14 of IS 302-1:2008(Construction : Ragged or sharp edges )	-	500	-
Cl.22.12 of IS 302-1:2008(Construction : Fixing of Handle, knob, grips, levers and similar parts )	-	500	-
Cl.22.11 of IS 302-1:2008(Construction : Fixing of non detachable parts )	-	500	-
Cl.22.7 of IS 302-1:2008(Construction : safeguards against the risk of excessive pressure. )	-	500	-
Cl.22.6 of IS 302-2-35:2017(Construction : size of drain hole )	-	500	-
Cl.22.6 of IS 302-1:2008(Construction : effect of water on 3 insulation )	-	500	-
Cl.22.2 of IS 302-1:2008(Construction : connection to supply mains )	-	500	-
Cl.22.1 of IS 302-1:2008(Construction : IP test )	-	500	-
Cl. 21.2 of IS 302-1:2008(Mechanical strength : prevent penetration by sharp implements. )	-	500	-
Cl.21.1 of IS 302-1:2008(Mechanical strength : Rough handling in normal use)	-	500	-
Cl.20 of IS 302-2-35:2017(Stability & Mechanical Hazards )	-	500	-
Cl.19 of IS 302-2-35:2017(Abnormal Operation : effect on container)	-	500	-
Cl.19 of IS 302-2-35:2017(Abnormal Operation : High voltage)	-	500	-
Cl.19 of IS 302-2-35:2017(Abnormal Operation : Temperature rise of insulation of supply cord)	-	500	-
Cl.19 of IS 302-2-35:2017(Abnormal Operation : Temperature rise of test corner)	-	500	-
Cl.19 of IS 302-2-35:2017(Abnormal Operation : Emission of flames, molten metal ,or poisonous or ignitable gas)	-	500	-
Cl.16 of IS 302-2-35:2017(Leakage Current and Electric Strength (After Humidity))	-	500	-
Cl.16 of IS 302-2-35:2017(Leakage Current and Electric Strength (After Humidity))	-	500	-
Cl.15 of IS 302-2-35:2017(Moisture Resistance )	-	500	-
Cl.14 of IS 302-2-35:2017(Transient Over Voltages )	-	500	-
Cl.13 of IS 302-2-35:2017(Leakage Current & 3 Strength at Operating Temperature : High voltage )	-	500	-
Cl.13 of IS 302-2-35:2017(Leakage Current & 3 Strength at Operating Temperature )	-	500	-
Cl.11 of 302-2-35:2017(Heating : room temperature)	-	500	-
Cl.11 of 302-2-35:2017(Heating : Insulation of supply cord)	-	500	-
Cl.11 of 302-2-35:2017(Heating : Temperature rise of test corner)	-	500	-
Cl.10 of IS 302-2- 35:2017(Power Input & Current )	-	500	-
Cl.8 of IS 302-2-35:2017(Protection Against Access To Live Parts)	-	500	-
Cl.7.102 of IS 302-2-35:2017(Marking : Standard mark)	-	500	-
Cl.7.101 of IS 302-2-35:2017(Marking : Woter inlet and outlet idetification)	-	500	-
Cl.7.15 of IS 302-1:2008(Marking : Position of marking)	-	500	-
Cl.7.14 of IS 302-1:2008(Marking ; Legibility and durability)	-	500	-
Cl.7.13 of IS 302-1:2008(Marking : Language)	-	500	-
Cl.7.10 & 7.11 of IS 302-1:2008(Marking : Indication for direction of control)	-	500	-
Cl.7.8 of IS 302-1:2008(Marking : Terminal for connection )	-	500	-
Cl.7.6 of IS 302-1:2008(Marking : Symbols)	-	500	-
Cl.7.1 of IS 302-2-35:2017(Marking : rated pressure)	-	500	-
Cl.7.1 of IS 302-1:2008(Marking : Country of manufacture)	-	500	-
Cl.7.1 of IS 302-1:2008(Marking : IP number )	-	500	-
Cl.7.1 of IS 302-1:2008(Marking : Symbol for class II)	-	500	-
Cl.7.1 of IS 302-1:2008(Marking : Molel or type)	-	500	-
Cl.7.1 of IS 302-1:2008(Marking : Manufacture identification)	-	500	-
Cl.7.1 of IS 302-1:2008(Marking : Rated power input)	-	500	-
Cl.7.1 of IS 302-1:2008(Marking : Nature of supply)	-	500	-
Cl.7.1 of IS 302-1:2008(Marking : Rated Voltage)	-	500	-
4(GENERAL REQUIREMENTS)	-	1000	-
5(GENERAL NOTE ON TEST)	-	1000	-
7(Marking)	-	500	-
7(Marking)	-	500	-
(Cl.7.1 of IS 302-2-35:2017)(Marking)	-	500	-
(Cl.7.101 of IS 302-2-35:2017)(Marking)	-	500	-
(Cl.8.1.1 of IS 8978:1992)(Marking)	-	500	-
(Cl.19.13 of IS 302-2-35:2017)(Abnormal operation)	-	500	-
(Cl.19.13 of IS 302-2-35:2017)(Abnormal operation)	-	500	-
(Cl.22 of IS 302-2-35:2017)(Construction)	-	500	-
(Cl.22 of IS 302-2-35:2017)(Construction)	-	500	-
(Cl.22 of IS 302-2-35:2017)(Construction)	-	500	-
(Cl.22 of IS 302-2-35:2017)(Construction)	-	500	-
(Cl.22 of IS 302-2-35:2017)(Construction)	-	500	-
(Cl.22 of IS 302-2-35:2017)(Construction)	-	500	-
(Cl.22 of IS 302-2-35:2017)(Construction)	-	500	-
(Cl.22 of IS 302-2-35:2017)(Construction)	-	500	-
(Cl.22 of IS 302-2-35:2017)(Construction)	-	500	-
(Cl.22 of IS 302-2-35:2017)(Construction)	-	500	-
(Cl.23 of IS 302-2-35:2017)(Internal wiring)	-	500	-
(Cl.23 of IS 302-2-35:2017)(Internal wiring)	-	500	-
(Cl.23 of IS 302-2-35:2017)(Internal wiring)	-	500	-
(Cl.23 of IS 302-2-35:2017)(Internal wiring)	-	500	-
(Cl.25.8 of IS 302-2-35:2017)(Supply Connection and External Flexible cords)	-	500	-
(CL.27.5 of IS 302-2-35:2017)(Provision for Earthing)	-	500	-
Cl.7 of IS 302-2-35:2017(Marking)	-	500	-
Cl.7 of IS 302-2-35:2017(Marking)	-	500	-
Cl.7 of IS 302-2-35:2017(Marking)	-	500	-
Cl.7 of IS 302-2-35:2017(Marking)	-	500	-
Cl.7 of IS 302-2-35:2017(Marking)	-	500	-
Cl.7 of IS 302-2-35:2017(Marking)	-	500	-
Cl.7 of IS 302-2-35:2017(Marking)	-	500	-
Cl.7 of IS 302-2-35:2017(Marking)	-	500	-
Cl.7 of IS 302-2-35:2017(Marking)	-	500	-
Cl.7 of IS 302-2-35:2017(Marking)	-	500	-
Cl.7 of IS 302-2-35:2017(Marking)	-	500	-
Cl.7 of IS 302-2-35:2017(Marking)	-	500	-
Cl.7 of IS 302-2-35:2017(Marking)	-	500	-
Cl.7 of IS 302-2-35:2017(Marking)	-	500	-
Cl.7 of IS 302-2-35:2017(Marking)	-	500	-
Cl.7 of IS 302-2-35:2017(Marking)	-	500	-
Cl.7 of IS 302-2-35:2017(Marking)	-	500	-
Cl.7 of IS 302-2-35:2017(Marking)	-	500	-
Cl.7 of IS 302-2-35:2017(Marking)	-	500	-
Cl.7 of IS 302-2-35:2017(Marking)	-	500	-
Cl.7 of IS 302-2-35:2017(Marking)	-	500	-
Cl.7 of IS 302-2-35:2017(Marking)	-	500	-
Cl.7 of IS 302-2-35:2017(Marking)	-	500	-
Cl.7 of IS 302-2-35:2017(Marking)	-	500	-
Cl.7 of IS 302-2-35:2017(Marking)	-	500	-
Cl.6 of IS 302-2-35:2017(Classification)	-	500	-
Cl.6 of IS 302-2-35:2017(Classification)	-	500	-
Cl.8 of IS 302-2-35:2017(Protection Against Access To Live Parts)	-	500	-
Cl.10 of IS 302-2- 35:2011(Power Input & Current )	-	500	-
Cl.11 of 302-2-35:2017(Heating)	-	500	-
Cl.11 of 302-2-35:2017(Heating)	-	500	-
Cl.11 of 302-2-35:2017(Heating)	-	500	-
Cl.11 of 302-2-35:2017(Heating)	-	500	-
Cl.13 of IS 302-2-35:2017(Leakage Current & Electrical Strength at Operating Temperature )	-	500	-
Cl.13 of IS 302-2-35:2017(Leakage Current & Electrical Strength at Operating Temperature )	-	500	-
Cl.14 of IS 302-2-35:2017(Transient Over Voltages )	-	500	-
Cl.15 of IS 302-2-35-2011(Moisture Resistance )	-	500	-
Cl.15 of IS 302-2-35-2011(Moisture Resistance )	-	500	-
Cl.16 of IS 302-2-35:2011(Leakage Current and Electric Strength)	-	500	-
Cl.16 of IS 302-2-35:2011(Leakage Current and Electric Strength)	-	500	-
Cl.17 IS 302-2-35:2017(Overload Protection of Transformers & Associated circuits )	-	500	-
Cl.19 of IS 302-2-35:2017(Abnormal Operation)	-	500	-
Cl.19 of IS 302-2-35:2017(Abnormal Operation)	-	500	-
Cl.19 of IS 302-2-35:2017(Abnormal Operation)	-	500	-
Cl.19 of IS 302-2-35:2017(Abnormal Operation)	-	500	-
Cl.19 of IS 302-2-35:2017(Abnormal Operation)	-	500	-
Cl.20 of IS 302-2-35-2011(Stability & Mechanical Hazards )	-	500	-
Cl.21.1 of IS 302-2-35-2011(Mechanical strength)	-	500	-
Cl. 21.2 of IS 302-1:2008(Mechanical strength)	-	500	-
Cl.22 of IS 302-2-35-2011(Construction )	-	500	-
Cl.22 of IS 302-2-35-2011(Construction )	-	500	-
Cl.22 of IS 302-2-35-2011(Construction )	-	500	-
Cl.22 of IS 302-2-35-2011(Construction )	-	500	-
Cl.22 of IS 302-2-35-2011(Construction )	-	500	-
Cl.22 of IS 302-2-35-2011(Construction )	-	500	-
Cl.22 of IS 302-2-35-2011(Construction )	-	500	-
Cl.22 of IS 302-2-35-2011(Construction )	-	500	-
Cl.22 of IS 302-2-35-2011(Construction )	-	500	-
Cl.22 of IS 302-2-35-2011(Construction )	-	500	-
Cl.22 of IS 302-2-35-2011(Construction )	-	500	-
Cl.22 of IS 302-2-35-2011(Construction )	-	500	-
Cl.22 of IS 302-2-35-2011(Construction )	-	500	-
Cl.22 of IS 302-2-35-2011(Construction )	-	500	-
Cl.22 of IS 302-2-35-2011(Construction )	-	500	-
Cl.22 of IS 302-2-35-2011(Construction )	-	500	-
Cl.22 of IS 302-2-35-2011(Construction )	-	500	-
Cl.22 of IS 302-2-35-2011(Construction )	-	500	-
Cl.22 of IS 302-2-35-2011(Construction )	-	500	-
Cl.22 of IS 302-2-35-2011(Construction )	-	500	-
Cl.22 of IS 302-2-35-2011(Construction )	-	500	-
Cl.22 of IS 302-2-35-2011(Construction )	-	500	-
Cl.22 of IS 302-2-35-2011(Construction )	-	500	-
Cl.22 of IS 302-2-35-2011(Construction )	-	500	-
Cl.22 of IS 302-2-35-2011(Construction )	-	500	-
Cl.22 of IS 302-2-35-2011(Construction )	-	500	-
Cl.22 of IS 302-2-35-2011(Construction )	-	500	-
Cl.22 of IS 302-2-35-2011(Construction )	-	500	-
Cl.22 of IS 302-2-35-2011(Construction )	-	500	-
Cl.22 of IS 302-2-35-2011(Construction )	-	500	-
Cl.22 of IS 302-2-35-2011(Construction )	-	500	-
Cl.22 of IS 302-2-35-2011(Construction )	-	500	-
Cl.22 of IS 302-2-35-2011(Construction )	-	500	-
Cl.22 of IS 302-2-35-2011(Construction )	-	500	-
Cl.22 of IS 302-2-35-2011(Construction )	-	500	-
Cl.22 of IS 302-2-35-2011(Construction )	-	500	-
Cl.22 of IS 302-2-35-2011(Construction )	-	500	-
Cl.22 of IS 302-2-35-2011(Construction )	-	500	-
Cl.22 of IS 302-2-35-2011(Construction )	-	500	-
Cl.22 of IS 302-2-35-2011(Construction )	-	500	-
Cl.22 of IS 302-2-35-2011(Construction )	-	500	-
Cl.22 of IS 302-2-35-2011(Construction )	-	500	-
Cl.22 of IS 302-2-35-2011(Construction )	-	500	-
Cl.22 of IS 302-2-35-2011(Construction )	-	500	-
Cl.22 of IS 302-2-35-2011(Construction )	-	500	-
Cl.22 of IS 302-2-35-2011(Construction )	-	500	-
Cl.22 of IS 302-2-35-2011(Construction )	-	500	-
Cl.22 of IS 302-2-35-2011(Construction )	-	500	-
Cl.22 of IS 302-2-35-2011(Construction )	-	500	-
Cl.22 of IS 302-2-35-2011(Construction )	-	500	-
Cl.22 of IS 302-2-35-2011(Construction )	-	500	-
Cl.22 of IS 302-2-35-2011(Construction )	-	500	-
Cl.22 of IS 302-2-35-2011(Construction )	-	500	-
Cl.22 of IS 302-2-35-2011(Construction )	-	500	-
Cl.22 of IS 302-2-35-2011(Construction )	-	500	-
Cl.22 of IS 302-2-35-2011(Construction )	-	500	-
Cl.22 of IS 302-2-35-2011(Construction )	-	500	-
Cl.22 of IS 302-2-35-2011(Construction )	-	500	-
Cl.23 of IS 302-2-35-2011(Internal Wiring)	-	500	-
Cl.23 of IS 302-2-35-2011(Internal Wiring)	-	500	-
Cl.23 of IS 302-2-35-2011(Internal Wiring)	-	500	-
Cl.23 of IS 302-2-35-2011(Internal Wiring)	-	500	-
Cl.23 of IS 302-2-35-2011(Internal Wiring)	-	500	-
Cl.23 of IS 302-2-35-2011(Internal Wiring)	-	500	-
Cl.23 of IS 302-2-35-2011(Internal Wiring)	-	500	-
Cl.23 of IS 302-2-35-2011(Internal Wiring)	-	500	-
Cl.23 of IS 302-2-35-2011(Internal Wiring)	-	500	-
Cl.23 of IS 302-2-35-2011(Internal Wiring)	-	500	-
Cl.23 of IS 302-2-35-2011(Internal Wiring)	-	500	-
Cl.23 of IS 302-2-35-2011(Internal Wiring)	-	500	-
Cl.23 of IS 302-2-35-2011(Internal Wiring)	-	500	-
Cl.23 of IS 302-2-35-2011(Internal Wiring)	-	500	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	500	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	500	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	500	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	500	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	500	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	500	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	500	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	500	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	500	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	500	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	500	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	500	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	500	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	500	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	500	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	500	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	500	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	500	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	500	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	500	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	500	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	500	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	500	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	500	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	500	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	500	-
Cl.26 of IS 302-2-35:2017(Terminals for External Conductors)	-	500	-
Cl.26 of IS 302-2-35:2017(Terminals for External Conductors)	-	500	-
Cl.26 of IS 302-2-35:2017(Terminals for External Conductors)	-	500	-
Cl.26 of IS 302-2-35:2017(Terminals for External Conductors)	-	500	-
Cl.26 of IS 302-2-35:2017(Terminals for External Conductors)	-	500	-
Cl.26 of IS 302-2-35:2017(Terminals for External Conductors)	-	500	-
Cl.26 of IS 302-2-35:2017(Terminals for External Conductors)	-	500	-
Cl.26 of IS 302-2-35:2017(Terminals for External Conductors)	-	500	-
Cl.26 of IS 302-2-35:2017(Terminals for External Conductors)	-	500	-
Cl.26 of IS 302-2-35:2017(Terminals for External Conductors)	-	500	-
Cl.26 of IS 302-2-35:2017(Terminals for External Conductors)	-	500	-
Cl.27 of IS 302-2-35:2017(Provision for Earthing)	-	500	-
Cl.27 of IS 302-2-35:2017(Provision for Earthing)	-	500	-
Cl.27 of IS 302-2-35:2017(Provision for Earthing)	-	500	-
Cl.27 of IS 302-2-35:2017(Provision for Earthing)	-	500	-
Cl.27 of IS 302-2-35:2017(Provision for Earthing)	-	500	-
Cl.27 of IS 302-2-35:2017(Provision for Earthing)	-	500	-
Cl.27 of IS 302-2-35:2017(Provision for Earthing)	-	500	-
Cl.28 of IS 302-2-35:2017(Screws and Connections )	-	500	-
Cl.29 of IS 302-2-35:2017(Clearances, Creepage Distances and Solid Insulation)	-	500	-
Cl.29 of IS 302-2-35:2017(Clearances, Creepage Distances and Solid Insulation)	-	500	-
Cl.29 of IS 302-2-35:2017(Clearances, Creepage Distances and Solid Insulation)	-	500	-
Cl.30 of IS 302-2-35: 2011(Resistance to Heat and Fire)	-	500	-
Cl.30 of IS 302-2-35: 2011(Resistance to Heat and Fire)	-	500	-
Cl.31 of IS 302-2-35: 2011(Resistance to Rusting )	-	500	-
Cl.32 of IS 302-2-35: 2011(Radiation, Toxicity and Similar Hazards )	-	500	-
Cl.10 of IS 8978 : 1992(Finish)	-	1000	-
Cl.11 of IS 8978 : 1992(Operation of flow switch)	-	1000	-
Cl.12 of IS 8978 : 1992(Endurance)	-	1000	-
4(GENERAL REQUIREMENTS)	-	500	-
5(GENERAL NOTE ON TEST)	-	500	-
7(Marking)	-	500	-
7(Marking)	-	500	-
(Cl.7.1 of IS 302-2-35:2017)(Marking)	-	500	-
(Cl.7.101 of IS 302-2-35:2017)(Marking)	-	500	-
(Cl.8.1.1 of IS 8978:1992)(Marking)	-	500	-
(Cl.19.13 of IS 302-2-35:2017)(Abnormal operation)	-	500	-
(Cl.19.13 of IS 302-2-35:2017)(Abnormal operation)	-	500	-
(Cl.22 of IS 302-2-35:2017)(Construction)	-	500	-
(Cl.22 of IS 302-2-35:2017)(Construction)	-	500	-
(Cl.22 of IS 302-2-35:2017)(Construction)	-	500	-
(Cl.22 of IS 302-2-35:2017)(Construction)	-	500	-
(Cl.22 of IS 302-2-35:2017)(Construction)	-	500	-
(Cl.22 of IS 302-2-35:2017)(Construction)	-	500	-
(Cl.22 of IS 302-2-35:2017)(Construction)	-	500	-
(Cl.22 of IS 302-2-35:2017)(Construction)	-	500	-
(Cl.22 of IS 302-2-35:2017)(Construction)	-	500	-
(Cl.22 of IS 302-2-35:2017)(Construction)	-	500	-
(Cl.23 of IS 302-2-35:2017)(Internal wiring)	-	500	-
(Cl.23 of IS 302-2-35:2017)(Internal wiring)	-	500	-
(Cl.23 of IS 302-2-35:2017)(Internal wiring)	-	500	-
(Cl.23 of IS 302-2-35:2017)(Internal wiring)	-	500	-
(Cl.25.8 of IS 302-2-35:2017)(Supply Connection and External Flexible cords)	-	500	-
(CL.27.5 of IS 302-2-35:2017)(Provision for Earthing)	-	500	-

04 Jul, 2027

-
Included w.e.f 15.01.2025 Exclusion : Cl-19.11.4.1 - Cl-19.11.4.7, Cl.24 of IS 302-2-35:2017 (Component )

IS 2082 (2018)

Stationary storage type electric water heaters - Specification (Fifth Revision)

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking)	-	1000	-
7(Marking)	-	1000	-
7(Marking)	-	1000	-
7(Marking)	-	1000	-
7(Marking)	-	1000	-
7(Marking)	-	1000	-
7(Marking)	-	1000	-
7(Marking)	-	1000	-
7(Marking)	-	1000	-
7(Marking)	-	1000	-
7(Marking)	-	1000	-
7(Marking)	-	1000	-
7(Marking)	-	1000	-
7(Marking)	-	1000	-
7(Marking)	-	1000	-
7(Marking)	-	1000	-
7(Marking)	-	1000	-
7(Marking)	-	1000	-
7(Marking)	-	1000	-
7(Marking)	-	1000	-
7(Marking)	-	1000	-
7(Marking)	-	1000	-
7(Marking)	-	1000	-
7(Marking)	-	1000	-
7(Marking)	-	1000	-
6(Classification )	-	1000	-
6(Classification )	-	1000	-
(Cl.8 of IS 302-2-21:2011)(Protection Against Access to Live Parts)	-	1000	-
(Cl.10 of IS 302-2-21: 2011)(Power Input & Current)	-	1000	-
(Cl.11 of 302-2-21:2011)(Heating)	-	1000	-
(Cl.11 of 302-2-21:2011)(Heating)	-	1000	-
(Cl.11 of 302-2-21:2011)(Heating)	-	1000	-
(Cl.13 of IS 302-2-21:2011)(Leakage Current )	-	1000	-
(Cl.13 of IS 302-2-21:2011)(Electrical Strength at Operating Temperature)	-	1000	-
(Cl.14ofIS302-2-21:2011)(Transient Over Voltages)	-	1000	-
(Cl.15 of IS 302-2-21-2011)(Moisture Resistance)	-	1000	-
(Cl.15 of IS 302-2-21-2011)(Moisture Resistance)	-	1000	-
(Cl.15 of IS 302-2-21-2011)(Moisture Resistance)	-	1000	-
(Cl.17 of IS 302-2-21:2011)(Overload protection of transformers & associated circuits)	-	1000	-
(Cl.19 of IS 302-2-21:2011)(Abnormal Operation)	-	1000	-
(Cl.19 of IS 302-2-21:2011)(Abnormal Operation)	-	1000	-
(Cl.19 of IS 302-2-21:2011)(Abnormal Operation)	-	1000	-
(Cl.19 of IS 302-2-21:2011)(Abnormal Operation)	-	1000	-
(Cl.20 of IS 302-2-21:2011)(Stability & Mechanical Hazards)	-	1000	-
(Cl.21ofIS302-2-21:2011)(Mechanical strength)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	1000	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	1000	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	1000	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	1000	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	1000	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	1000	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	1000	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	1000	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	1000	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	1000	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	1000	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	1000	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	1000	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	1000	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	1000	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	1000	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	1000	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	1000	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	1000	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	1000	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	1000	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	1000	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	1000	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	1000	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	1000	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	1000	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	1000	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	1000	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	1000	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	1000	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	1000	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	1000	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	1000	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	1000	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	1000	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	1000	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	1000	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	1000	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	1000	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	1000	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	1000	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	1000	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	1000	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	1000	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	1000	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	1000	-
(Cl.27 of IS 302-2-21:2011)(Provision for Earthing)	-	1000	-
(Cl.27 of IS 302-2-21:2011)(Provision for Earthing)	-	1000	-
(Cl.27 of IS 302-2-21:2011)(Provision for Earthing)	-	1000	-
(Cl.27 of IS 302-2-21:2011)(Provision for Earthing)	-	1000	-
(Cl.27 of IS 302-2-21:2011)(Provision for Earthing)	-	1000	-
(Cl.27 of IS 302-2-21:2011)(Provision for Earthing)	-	1000	-
(Cl.28 of IS 302-2-21:2011)(Screws & Connections)	-	1000	-
(Cl.29ofIS302-2-21:2011)(Clearances, Creepage Distances and Solid Insulation)	-	1000	-
(Cl.30 of IS 302-2-21:2011)(Resistance to Heat & Fire)	-	1000	-
(Cl.30 of IS 302-2-21:2011)(Resistance to Heat & Fire)	-	1000	-
(Cl.31 of IS 302-2-21:2011)(Resistance to Rusting)	-	1000	-
(Cl.16 of IS 2082:2018)(Standing Loss per 24 Hours)	-	1000	-
(Cl.17 of IS 2082:2018)(Hot Water Output)	-	1000	-
(Cl.18 of IS 2082:2018)( Reheating Time)	-	1000	-
(Cl.19 of IS 2082:2018)(Mixing Factor)	-	1000	-
(Cl.20 of IS 2082:2018)(Deviation of Dial Calibration)	-	1000	-
(Cl.21 of IS 2082:2018)(Cyclic Temperature Variation)	-	1000	-
(Cl.22 of IS 2082:2018)(Finish)	-	1000	-
(Cl.15 of IS 2082:2018)(Verification of the Rated Capacity)	-	1000	-
Cl.22 of IS 2082:2018(Finish)	-	1000	-
Cl.21 of IS 2082:2018(Cyclic Temperature Variation)	-	1000	-
Cl.20 of IS 2082:2018(Deviation of Dial Calibration)	-	1000	-
Cl.19 of IS 2082:2018(Mixing Factor)	-	1000	-
Cl.18 of IS 2082:2018( Reheating Time)	-	1000	-
Cl.17 of IS 2082:2018(Hot Water Output)	-	1000	-
Cl.16 of IS 2082:2018(Standing Loss per 24 Hours)	-	1000	-
Cl.15 of IS 2082:2018(Verification of the Rated Capacity)	-	1000	-
Cl.31 of IS 302-2-21:2018(Resistance to Rusting)	-	1000	-
Cl.30.2 of IS 302-1:2008(Resistance to Heat & Fire : Glow wire test )	-	1000	-
Cl.30.1 of IS 302-1:2008(Resistance to Heat & Fire : Ball pressure test )	-	1000	-
Cl.29.2 of IS 302-1:2008(Clearances, Creepage Distances and Solid Insulation : Creepage distance )	-	1000	-
Cl.29.1 of IS 302-1:2008(Clearances, Creepage Distances and Solid Insulation : Clearance distance )	-	1000	-
Cl.28 of IS 302-2-21:2018(Screws & Connections)	-	1000	-
Cl.27.5 of IS 302-1:2008(Provision for Earthing : ECR )	-	1000	-
Cl.27 of IS 302-2-21:2018(Provision for Earthing)	-	1000	-
Cl.26 of IS 302-2-21: 2018(Terminals for External Conductors)	-	1000	-
Cl.25.18 of IS 302-1:2008(Supply Connection & External Flexible Cords)	-	1000	-
Cl.25.15 of IS 302-1:2008(Supply Connection & External Flexible Cords : Cord grip test - displacement )	-	1000	-
Cl.25.15 of IS 302-1:2008(Supply Connection & External Flexible Cords : Cord grip test )	-	1000	-
Cl.25.12 of IS 302-1:2008(Supply Connection & External Flexible Cords : Moulding of supply cord )	-	1000	-
Cl.25.10 of IS 302-1:2008(Supply Connection & External Flexible Cords : Colour of Earthing conductor )	-	1000	-
Cl.25.8 of IS 302-2-21:2018(Supply Connection & External Flexible Cords : Resistance of supply cord )	-	1000	-
Cl.25.5 of IS 302-1:2008(Supply Connection & External Flexible Cords : Type of attachment )	-	1000	-
Cl.25 of IS 302-2-21:2018(Supply Connection & External Flexible Cords : connection to the supply mains)	-	1000	-
Cl. 23 of IS 302-1:2008(Internal Wiring )	-	1000	-
Cl.22.111 of IS 302-2-21:2018(Construction : Resistance to vacuum )	-	1000	-
Cl.22.110 of IS 302-2-21:2018(Construction : meterial of connections )	-	1000	-
Cl.22.110 of IS 302-2-21:2018(Construction : Material of Inner conatiner )	-	1000	-
Cl.22.109 of IS 302-2-21:2018(Construction : Drain for appliance having a capacity of more than 15 liter)	-	1000	-
Cl.22.108 of IS 302-2-21:2018(Construction : fixing to wall )	-	1000	-
Cl.22.107 of IS 302-2-21:2018(Construction : Position of Heating elements and thermal control sensor)	-	1000	-
Cl.22.106 of IS 302-2-21:2018(Construction : Operation of thermal cut- out )	-	1000	-
Cl.22.104 of IS 302-2-21:2018(Construction : Outlet of open outlet heater )	-	1000	-
Cl.22.103 of IS 302-2-21:2018(Construction : Operation of Pressure relieve devices )	-	1000	-
Cl.22.102 of IS 302-2-21:2018(Construction : repeated drawing of water temp )	-	1000	-
Cl.22.101 of IS 302-2-21:2018(Construction : rated pressure of closed water heater )	-	1000	-
Cl.22.47 of IS 302-2-21:2018 (Construction : Water pressure test )	-	1000	-
Cl.22.44 of IS 302-1:2008(Construction : Shape and decoration of enclosure)	-	1000	-
Cl.22.34, Cl 22.35 of IS 302-1:2008(Construction : Shaft of operating Knobs )	-	1000	-
Cl.22.33 of IS 302-1:2008(Construction : Direct contact of liquids )	-	1000	-
Cl 22.26 ,Cl.22.28, Cl 22.29, Cl 22.30 , Cl 22.31, Cl 22.32 of IS 302-1:2008(Construction : Supplymentry/ double / reinforced insulation for Class II/ Class III appliance )	-	1000	-
Cl.22.18 Of IS 302-1:2008(Construction : Resistance to corrosion )	-	1000	-
Cl.22.17 of IS 302-1:2008(Construction : Spacers )	-	1000	-
Cl.22.14 of IS 302-1:2008(Construction : ragged or sharp edges)	-	1000	-
Cl.22.12 of IS 302-1:2008(Construction : Fixing of Handle, knob, grips, levers and similar parts)	-	1000	-
Cl.22.11 of IS 302-1:2008(Construction : Fixing of non detachable part )	-	1000	-
Cl.22.7 of IS 302-1:2008(Construction: adequate safeguards against the risk of excessive pressure)	-	1000	-
Cl.22.6 of IS 302-2-21:2018(Construction : Size of drain hole )	-	1000	-
Cl.22.6 of IS 302-1:2008(Construction : Effect of water on 3 insulation )	-	1000	-
Cl.22.2 of IS 302-1:2008(Construction : Provision to ensure all pole disconnection )	-	1000	-
Cl.22.1 of IS 302-1:2008(Construction : IP test )	-	1000	-
Cl.21.2 of IS 302-1:2008(Mechanical strength : prevent penetration by sharp implements. )	-	1000	-
Cl.21.1 of IS 302-1:2008(Mechanical strength : Rough handling in normal use)	-	1000	-
Cl.20 of IS 302-1:2008(Stability & Mechanical Hazards)	-	1000	-
Cl.19 of IS 302-2-21:2018(Abnormal Operation : leakage from container during test)	-	1000	-
Cl.19 of IS 302-2-21:2018(Abnormal Operation : High Voltage )	-	1000	-
Cl.19 of IS 302-2-21:2018(Abnormal Operation : Insulation of the supply cable or cord)	-	1000	-
Cl.19 of IS 302-2-21:2018(Abnormal Operation : Wall ceiling temp. of test corner )	-	1000	-
Cl.19 of IS 302-2-21:2018(Abnormal Operation : emission of flame or molten metal or poisonous or ignitable gas )	-	1000	-
Cl.16 of IS 302-2-21-2018(Leakage current and Electric strength (After humidity): Electric Strentgh )	-	1000	-
Cl.16 of IS 302-2-21-2018(Leakage current and Electric strength (After humidity): Leakage current )	-	1000	-
Cl.15 of IS 302-2-21-2018(Moisture Resistance)	-	1000	-
Cl.14 of IS 302-2-21:2018(Transient Over Voltages)	-	1000	-
Cl.13 of IS 302-2-21:2018(3 Strength at Operating Temperature)	-	1000	-
Cl.13 of IS 302-2-21:2018(Leakage Current )	-	1000	-
Cl.11 of 302-2-21:2018(Heating : Room Temp.)	-	1000	-
Cl.11 of 302-2-21:2018(Heating : Temp of Rubber or PVC insulation of internal and external wiring)	-	1000	-
Cl.11 of 302-2-21:2018(Heating : Temp of Walls, ceilings and floor of the test corner )	-	1000	-
Cl.10 of IS 302-2-21: 2018(Power Input & Current)	-	1000	-
Cl.8 of IS 302-2-21:2018(Protection Against Access to Live Parts)	-	1000	-
7.101(Marking : Indifiction of water inlet and water outlet )	-	1000	-
7.14(Marking : Legibility and durability)	-	1000	-
7.13(Marking : Official language of Instruction )	-	1000	-
7.11(Marking : Indication of controls )	-	1000	-
7.8(Marking : Terminals )	-	1000	-
7.6(Marking : Symbol used )	-	1000	-
7.1(Marking : Warning for Open- outlet )	-	1000	-
7.1(Marking : Statement for pressure reducing valve ( For rated pressure less than 0.6 MPa))	-	1000	-
7.1(Marking : Statement for a pressure-relief device)	-	1000	-
7.1(Marking : Rated capacity)	-	1000	-
7.1(Marking : Rated pressure)	-	1000	-
7.1(Marking : Country of manufacture)	-	1000	-
7.1(Marking: IP Number)	-	1000	-
7.1(Marking: Symbol for Class II)	-	1000	-
7.1(Marking: Model or type reference)	-	1000	-
7.1(Marking: Name, trademark or identification mark of manufacturer )	-	1000	-
Cl. 23 of IS 302-1:2008(Internal Wiring : color identification for earthing conductor )	-	1000	-
7.1(Marking : Rated power input)	-	1000	-
7.1(Marking : Symbol for nature of supply )	-	1000	-
7.1(Marking : Rated Voltage )	-	1000	-
Cl.32 of IS 302-1:2008()	-	1000	-
4(GENERAL REQUIREMENT)	-	1000	-
5(GENERAL CONDITIONS FOR THE TESTS)	-	1000	-
12(THERMOSTAT SETTING)	-	1000	-
Cl-10(Mounting of the water heater)	-	1000	-
Cl-11(Measurements of stored water temperature)	-	1000	-
Cl-12(Thermostat setting)	-	1000	-
Cl-14(Verification of the rated capacity)	-	1000	-
Cl-13(Measurement of energy consumption)	-	1000	-
(Cl.22 of IS 302-2-21:2018)(Constructions)	-	1000	-
(Cl.22 of IS 302-2-21:2018)(Constructions)	-	1000	-
(Cl.22.108 of IS 302-2-21:2018)(Constructions)	-	1000	-
(Cl.22.6 of IS 302-2-21:2018)(Constructions)	-	1000	-
(Cl.22.47 of IS 302-2-21:2018)(Constructions)	-	1000	-
(Cl.22.47 of IS 302-2-21:2018)(Constructions)	-	1000	-
(Cl.22.47 of IS 302-2-21:2018)(Constructions)	-	1000	-
(Cl.22.47 of IS 302-2-21:2018)(Constructions)	-	1000	-
(Cl.22.47 of IS 302-2-21:2018)(Constructions)	-	1000	-
(Cl.22.101 of IS 302-2-21:2018)(Constructions)	-	1000	-
(Cl.22.105 of IS 302-2-21:2018)(Constructions)	-	1000	-
(Cl.22.101 of IS 302-2-21:2018)(Constructions)	-	1000	-
(Cl.22.103 of IS 302-2-21:2018)(Constructions)	-	1000	-
(Cl.22.104 of IS 302-2-21:2018)(Constructions)	-	1000	-
(Cl.22.104 of IS 302-2-21:2018)(Constructions)	-	1000	-
(Cl.22.105 of IS 302-2-21:2018)(Constructions)	-	1000	-
(Cl.22.109 of IS 302-2-21:2018)(Constructions)	-	1000	-
(Cl.25 of IS 302-2-21:2018)(Supply Connection and External Flexible cords)	-	1000	-
7(Marking)	-	1000	-
7(Marking)	-	1000	-
7(Marking)	-	1000	-
7(Marking)	-	500	-
7(Marking)	-	500	-
7(Marking)	-	500	-
7(Marking)	-	500	-
7(Marking)	-	500	-
7(Marking)	-	500	-
7(Marking)	-	500	-
7(Marking)	-	500	-
7(Marking)	-	500	-
7(Marking)	-	500	-
7(Marking)	-	500	-
7(Marking)	-	500	-
7(Marking)	-	500	-
7(Marking)	-	500	-
7(Marking)	-	500	-
7(Marking)	-	500	-
7(Marking)	-	500	-
7(Marking)	-	500	-
7(Marking)	-	500	-
7(Marking)	-	500	-
7(Marking)	-	500	-
7(Marking)	-	500	-
7(Marking)	-	500	-
7(Marking)	-	500	-
7(Marking)	-	500	-
6(Classification )	-	500	-
6(Classification )	-	500	-
(Cl.8 of IS 302-2-21:2011)(Protection Against Access to Live Parts)	-	500	-
(Cl.10 of IS 302-2-21: 2011)(Power Input & Current)	-	500	-
(Cl.11 of 302-2-21:2011)(Heating)	-	500	-
(Cl.11 of 302-2-21:2011)(Heating)	-	500	-
(Cl.11 of 302-2-21:2011)(Heating)	-	500	-
(Cl.13 of IS 302-2-21:2011)(Leakage Current )	-	500	-
(Cl.13 of IS 302-2-21:2011)(Electrical Strength at Operating Temperature)	-	500	-
(Cl.14ofIS302-2-21:2011)(Transient Over Voltages)	-	500	-
(Cl.15 of IS 302-2-21-2011)(Moisture Resistance)	-	500	-
(Cl.15 of IS 302-2-21-2011)(Moisture Resistance)	-	500	-
(Cl.15 of IS 302-2-21-2011)(Moisture Resistance)	-	500	-
(Cl.17 of IS 302-2-21:2011)(Overload protection of transformers & associated circuits)	-	500	-
(Cl.19 of IS 302-2-21:2011)(Abnormal Operation)	-	500	-
(Cl.19 of IS 302-2-21:2011)(Abnormal Operation)	-	500	-
(Cl.19 of IS 302-2-21:2011)(Abnormal Operation)	-	500	-
(Cl.19 of IS 302-2-21:2011)(Abnormal Operation)	-	500	-
(Cl.20 of IS 302-2-21:2011)(Stability & Mechanical Hazards)	-	500	-
(Cl.21ofIS302-2-21:2011)(Mechanical strength)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	500	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	500	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	500	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	500	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	500	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	500	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	500	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	500	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	500	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	500	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	500	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	500	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	500	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	500	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	500	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	500	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	500	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	500	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	500	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	500	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	500	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	500	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	500	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	500	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	500	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	500	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	500	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	500	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	500	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	500	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	500	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	500	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	500	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	500	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	500	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	500	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	500	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	500	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	500	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	500	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	500	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	500	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	500	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	500	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	500	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	500	-
(Cl.27 of IS 302-2-21:2011)(Provision for Earthing)	-	500	-
(Cl.27 of IS 302-2-21:2011)(Provision for Earthing)	-	500	-
(Cl.27 of IS 302-2-21:2011)(Provision for Earthing)	-	500	-
(Cl.27 of IS 302-2-21:2011)(Provision for Earthing)	-	500	-
(Cl.27 of IS 302-2-21:2011)(Provision for Earthing)	-	500	-
(Cl.27 of IS 302-2-21:2011)(Provision for Earthing)	-	500	-
(Cl.28 of IS 302-2-21:2011)(Screws & Connections)	-	500	-
(Cl.29ofIS302-2-21:2011)(Clearances, Creepage Distances and Solid Insulation)	-	500	-
(Cl.30 of IS 302-2-21:2011)(Resistance to Heat & Fire)	-	500	-
(Cl.30 of IS 302-2-21:2011)(Resistance to Heat & Fire)	-	500	-
(Cl.31 of IS 302-2-21:2011)(Resistance to Rusting)	-	500	-
(Cl.16 of IS 2082:2018)(Standing Loss per 24 Hours)	-	1000	-
(Cl.17 of IS 2082:2018)(Hot Water Output)	-	1000	-
(Cl.18 of IS 2082:2018)( Reheating Time)	-	1000	-
(Cl.19 of IS 2082:2018)(Mixing Factor)	-	1000	-
(Cl.20 of IS 2082:2018)(Deviation of Dial Calibration)	-	1000	-
(Cl.21 of IS 2082:2018)(Cyclic Temperature Variation)	-	1000	-
(Cl.22 of IS 2082:2018)(Finish)	-	500	-
(Cl.15 of IS 2082:2018)(Verification of the Rated Capacity)	-	1000	-
Cl.32 of IS 302-1:2008()	-	500	-
4(GENERAL REQUIREMENT)	-	500	-
5(GENERAL CONDITIONS FOR THE TESTS)	-	500	-
12(THERMOSTAT SETTING)	-	1000	-
Cl-10(Mounting of the water heater)	-	1000	-
Cl-11(Measurements of stored water temperature)	-	1000	-
Cl-12(Thermostat setting)	-	1000	-
Cl-14(Verification of the rated capacity)	-	1000	-
Cl-13(Measurement of energy consumption)	-	1000	-
(Cl.22 of IS 302-2-21:2018)(Constructions)	-	500	-
(Cl.22 of IS 302-2-21:2018)(Constructions)	-	500	-
(Cl.22.108 of IS 302-2-21:2018)(Constructions)	-	500	-
(Cl.22.6 of IS 302-2-21:2018)(Constructions)	-	500	-
(Cl.22.47 of IS 302-2-21:2018)(Constructions)	-	500	-
(Cl.22.47 of IS 302-2-21:2018)(Constructions)	-	500	-
(Cl.22.47 of IS 302-2-21:2018)(Constructions)	-	500	-
(Cl.22.47 of IS 302-2-21:2018)(Constructions)	-	500	-
(Cl.22.47 of IS 302-2-21:2018)(Constructions)	-	500	-
(Cl.22.101 of IS 302-2-21:2018)(Constructions)	-	500	-
(Cl.22.105 of IS 302-2-21:2018)(Constructions)	-	500	-
(Cl.22.101 of IS 302-2-21:2018)(Constructions)	-	500	-
(Cl.22.103 of IS 302-2-21:2018)(Constructions)	-	500	-
(Cl.22.104 of IS 302-2-21:2018)(Constructions)	-	500	-
(Cl.22.104 of IS 302-2-21:2018)(Constructions)	-	500	-
(Cl.22.105 of IS 302-2-21:2018)(Constructions)	-	500	-
(Cl.22.109 of IS 302-2-21:2018)(Constructions)	-	500	-
(Cl.25 of IS 302-2-21:2018)(Supply Connection and External Flexible cords)	-	500	-
7(Marking)	-	500	-
7(Marking)	-	500	-
7(Marking)	-	500	-
7(Marking)	-	500	-
7(Marking)	-	500	-
7(Marking)	-	500	-
7(Marking)	-	500	-
7(Marking)	-	500	-
7(Marking)	-	500	-
7(Marking)	-	500	-
7(Marking)	-	500	-
7(Marking)	-	500	-
7(Marking)	-	500	-
7(Marking)	-	500	-
7(Marking)	-	500	-
7(Marking)	-	500	-
7(Marking)	-	500	-
7(Marking)	-	500	-
7(Marking)	-	500	-
7(Marking)	-	500	-
7(Marking)	-	500	-
7(Marking)	-	500	-
7(Marking)	-	500	-
7(Marking)	-	500	-
7(Marking)	-	500	-
7(Marking)	-	500	-
7(Marking)	-	500	-
7(Marking)	-	500	-
6(Classification )	-	500	-
6(Classification )	-	500	-
(Cl.8 of IS 302-2-21:2011)(Protection Against Access to Live Parts)	-	500	-
(Cl.10 of IS 302-2-21: 2011)(Power Input & Current)	-	500	-
(Cl.11 of 302-2-21:2011)(Heating)	-	500	-
(Cl.11 of 302-2-21:2011)(Heating)	-	500	-
(Cl.11 of 302-2-21:2011)(Heating)	-	500	-
(Cl.13 of IS 302-2-21:2011)(Leakage Current )	-	500	-
(Cl.13 of IS 302-2-21:2011)(Electrical Strength at Operating Temperature)	-	500	-
(Cl.14ofIS302-2-21:2011)(Transient Over Voltages)	-	500	-
(Cl.15 of IS 302-2-21-2011)(Moisture Resistance)	-	500	-
(Cl.15 of IS 302-2-21-2011)(Moisture Resistance)	-	500	-
(Cl.15 of IS 302-2-21-2011)(Moisture Resistance)	-	500	-
(Cl.17 of IS 302-2-21:2011)(Overload protection of transformers & associated circuits)	-	500	-
(Cl.19 of IS 302-2-21:2011)(Abnormal Operation)	-	500	-
(Cl.19 of IS 302-2-21:2011)(Abnormal Operation)	-	500	-
(Cl.19 of IS 302-2-21:2011)(Abnormal Operation)	-	500	-
(Cl.19 of IS 302-2-21:2011)(Abnormal Operation)	-	500	-
(Cl.20 of IS 302-2-21:2011)(Stability & Mechanical Hazards)	-	500	-
(Cl.21ofIS302-2-21:2011)(Mechanical strength)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	500	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	500	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	500	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	500	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	500	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	500	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	500	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	500	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	500	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	500	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	500	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	500	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	500	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	500	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	500	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	500	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	500	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	500	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	500	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	500	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	500	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	500	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	500	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	500	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	500	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	500	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	500	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	500	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	500	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	500	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	500	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	500	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	500	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	500	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	500	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	500	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	500	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	500	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	500	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	500	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	500	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	500	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	500	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	500	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	500	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	500	-
(Cl.27 of IS 302-2-21:2011)(Provision for Earthing)	-	500	-
(Cl.27 of IS 302-2-21:2011)(Provision for Earthing)	-	500	-
(Cl.27 of IS 302-2-21:2011)(Provision for Earthing)	-	500	-
(Cl.27 of IS 302-2-21:2011)(Provision for Earthing)	-	500	-
(Cl.27 of IS 302-2-21:2011)(Provision for Earthing)	-	500	-
(Cl.27 of IS 302-2-21:2011)(Provision for Earthing)	-	500	-
(Cl.28 of IS 302-2-21:2011)(Screws & Connections)	-	500	-
(Cl.29ofIS302-2-21:2011)(Clearances, Creepage Distances and Solid Insulation)	-	500	-
(Cl.30 of IS 302-2-21:2011)(Resistance to Heat & Fire)	-	500	-
(Cl.30 of IS 302-2-21:2011)(Resistance to Heat & Fire)	-	500	-
(Cl.31 of IS 302-2-21:2011)(Resistance to Rusting)	-	500	-
(Cl.16 of IS 2082:2018)(Standing Loss per 24 Hours)	-	1000	-
(Cl.17 of IS 2082:2018)(Hot Water Output)	-	1000	-
(Cl.18 of IS 2082:2018)( Reheating Time)	-	1000	-
(Cl.19 of IS 2082:2018)(Mixing Factor)	-	1000	-
(Cl.20 of IS 2082:2018)(Deviation of Dial Calibration)	-	1000	-
(Cl.21 of IS 2082:2018)(Cyclic Temperature Variation)	-	1000	-
(Cl.22 of IS 2082:2018)(Finish)	-	1000	-
(Cl.15 of IS 2082:2018)(Verification of the Rated Capacity)	-	1000	-
Cl.32 of IS 302-1:2008()	-	500	-
4(GENERAL REQUIREMENT)	-	500	-
5(GENERAL CONDITIONS FOR THE TESTS)	-	500	-
12(THERMOSTAT SETTING)	-	1000	-
Cl-10(Mounting of the water heater)	-	1000	-
Cl-11(Measurements of stored water temperature)	-	1000	-
Cl-12(Thermostat setting)	-	1000	-
Cl-14(Verification of the rated capacity)	-	1000	-
Cl-13(Measurement of energy consumption)	-	1000	-
(Cl.22 of IS 302-2-21:2018)(Constructions)	-	500	-
(Cl.22 of IS 302-2-21:2018)(Constructions)	-	500	-
(Cl.22.108 of IS 302-2-21:2018)(Constructions)	-	500	-
(Cl.22.6 of IS 302-2-21:2018)(Constructions)	-	500	-
(Cl.22.47 of IS 302-2-21:2018)(Constructions)	-	500	-
(Cl.22.47 of IS 302-2-21:2018)(Constructions)	-	500	-
(Cl.22.47 of IS 302-2-21:2018)(Constructions)	-	500	-
(Cl.22.47 of IS 302-2-21:2018)(Constructions)	-	500	-
(Cl.22.47 of IS 302-2-21:2018)(Constructions)	-	500	-
(Cl.22.101 of IS 302-2-21:2018)(Constructions)	-	500	-
(Cl.22.105 of IS 302-2-21:2018)(Constructions)	-	500	-
(Cl.22.101 of IS 302-2-21:2018)(Constructions)	-	500	-
(Cl.22.103 of IS 302-2-21:2018)(Constructions)	-	500	-
(Cl.22.104 of IS 302-2-21:2018)(Constructions)	-	500	-
(Cl.22.104 of IS 302-2-21:2018)(Constructions)	-	500	-
(Cl.22.105 of IS 302-2-21:2018)(Constructions)	-	500	-
(Cl.22.109 of IS 302-2-21:2018)(Constructions)	-	500	-
(Cl.25 of IS 302-2-21:2018)(Supply Connection and External Flexible cords)	-	500	-
7(Marking)	-	500	-
7(Marking)	-	500	-
7(Marking)	-	500	-

04 Jul, 2027

-
Included.w.e.f.22.01.2025 Exclusion Cl. 24 (component) Cl 19.11.4.1 to Cl 19.11.4.7 (component)

IS 302 : Part 2 : Sec 35 (2017)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 35 electric instantaneous water heaters (Second Revision)

20000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.32(Verification)	-	2000	-
Cl.31(Verification)	-	2000	-
Cl.30(Verification)	-	2000	-
CL.29(Verification)	-	1000	-
Cl.28(Verification)	-	1000	-
Cl.27(Verification)	-	1000	-
Cl.26(Verification)	-	1000	-
Cl.25(Verification)	-	1000	-
Cl.23(Verification)	-	1000	-
Cl.22(Verification)	-	1000	-
Cl.21(Verification)	-	1000	-
Cl.20(Verification)	-	1000	-
Cl.19(Verification)	-	1000	-
Cl.17(Verification)	-	1000	-
Cl. 16(Verification)	-	2000	-
Cl.15(Verification)	-	1000	-
Cl.14(Verification)	-	1000	-
Cl.13(Verification)	-	2000	-
Cl.11(Verification)	-	1000	-
Cl.10(Verification)	-	1000	-
Cl.8(Verification)	-	2000	-
Cl. 7(Verification)	-	1000	-
Cl. 7(Verification)	-	1000	-
Cl. 32 IS 302-2-35(Radiation, Toxicity and similar hazards)	-	2000	-
Cl. 31 IS 302-2-35(Resistance to Rusting)	-	2000	-
Cl. 30 IS 302-2-35(Resistance to Heat Fire & Tracking )	-	2000	-
Cl. 29 IS 302-2-35(Clearances, Creepage Distances & Solid insulation )	-	1000	-
Cl. 28 IS 302-2-35(Screws & Connections)	-	1000	-
Cl. 27 IS 302-2-35(Provision for Earthing )	-	1000	-
Cl. 26 IS 302-2-35(Terminals for External conductors )	-	1000	-
Cl. 25 IS 302-2-35(Supply Connection & External Flexible Cords)	-	1000	-
Cl. 23 IS 302-2-35(Internal Wiring)	-	1000	-
Cl. 22 IS 302-2-35(Construction )	-	1000	-
Cl. 21 IS 302-2-35(Mechanical strength)	-	1000	-
Cl. 20 IS 302-2-35(Stability & Mechanical Hazards)	-	1000	-
Cl. 19 IS 302-2-35(Abnormal Operation )	-	1000	-
Cl. 18 IS 302-2-35(Endurance)	-	1000	-
Cl. 17 IS 302-2-35(Overload Protection of Transformers and Associated Circuit)	-	1000	-
Cl. 16 IS 302-2-35(Leakage Current & Electric Strength at Operating Temperature (After Humidity Treatment))	-	2000	-
Cl. 15 IS 302-2-35(Moisture Resistance Test )	-	1000	-
Cl. 14 IS 302-2-35(Radio and television interference suppression / Transient over voltages)	-	1000	-
Cl. 13 IS 302-2-35(Leakage Current & Electric Strength at Operating Temperature)	-	2000	-
Cl. 11 IS 302-2-35(Heating)	-	1000	-
Cl. 10 IS 302-2-35(Power Input and Current )	-	1000	-
Cl. 9 IS 302-2-35(Starting of motor operated appliances)	-	1000	-
Cl. 8 IS 302-2-35(Protection against access to live parts)	-	2000	-
Cl. 7 IS 302-2-35(Marking and Instruction)	-	1000	-
Cl. 6 IS 302-2-35(Classification)	-	1000	-
5(GENERAL CONDITIONS FOR THE TESTS)	-	1000	-
4(GENERAL REQUIREMENT)	-	1000	-

04 Jul, 2027

-
Included w.e.f 15.01.2025 Exclusion : Cl 19.11.4.1 - Cl 19.11.4.7 , Cl. 24 IS 302-2-35 (Components)

IS 302 : Part 2 : Sec 21 (2024)

Household and Similar Electrical Appliancesï¿½Safety Part 2 Particular Requirements Section 21 Storage Water Heaters

20000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(General requirement)	-	1000	-
5(General conditions for the tests)	-	1000	-
6(Classification)	-	1000	-
7(Marking and instructions)	-	1000	-
8(Protection against access to live parts)	-	2000	-
9(Starting of motor-operated appliances)	-	1000	-
10(Power input and current)	-	1000	-
11(Heating)	-	1000	-
13(Leakage current and electric strength at operating temperature)	-	2000	-
14(Transient overvoltages)	-	1500	-
15(Moisture resistance)	-	1000	-
16(Leakage current and electric strength)	-	1500	-
17(Overload protection of transformers and associated circuits)	-	1000	-
18(Endurance)	-	1000	-
19(Abnormal operation)	-	1500	-
20(Stability and mechanical hazards)	-	2000	-
21(Mechanical strength)	-	1500	-
22(Construction)	-	2000	-
23(Internal wiring)	-	2000	-
25(Supply connection and external flexible cords)	-	2000	-
26(Terminals for external conductors)	-	1500	-
27(Provision for earthing)	-	1000	-
28(Screws and connections)	-	1000	-
29(Clearances, creepage distances and solid insulation)	-	1000	-
30(Resistance to heat and fire)	-	1000	-
31(Resistance to rusting)	-	1500	-
32(Radiation, toxicity and similar hazards)	-	1000	-
A.101(Pressure test)	-	1000	-
12(Charging of metal-ion batteries)	-	1000	-
22.101(rated pressure)	-	1000	-
22.102(Closed water heaters)	-	1000	-
22.103(Addition)	-	1000	-
22.104(Addition)	-	1000	-
22.105(Cistern-type water heaters)	-	1000	-
22.109(Addition)	-	1000	-
4(General requirement)	-	-	-
5(General conditions for the tests)	-	-	-
6(Classification)	-	-	-
7(Marking and instructions)	-	-	-
8(Protection against access to live parts)	-	-	-
9(Starting of motor-operated appliances)	-	-	-
10(Power input and current)	-	-	-
11(Heating)	-	-	-
13(Leakage current and electric strength at operating temperature)	-	-	-
14(Transient overvoltages)	-	-	-
15(Moisture resistance)	-	-	-
16(Leakage current and electric strength)	-	-	-
17(Overload protection of transformers and associated circuits)	-	-	-
18(Endurance)	-	-	-
19(Abnormal operation)	-	-	-
20(Stability and mechanical hazards)	-	-	-
21(Mechanical strength)	-	-	-
22(Construction)	-	-	-
23(Internal wiring)	-	-	-
25(Supply connection and external flexible cords)	-	-	-
26(Terminals for external conductors)	-	-	-
27(Provision for earthing)	-	-	-
28(Screws and connections)	-	-	-
29(Clearances, creepage distances and solid insulation)	-	-	-
30(Resistance to heat and fire)	-	-	-
31(Resistance to rusting)	-	-	-
32(Radiation, toxicity and similar hazards)	-	-	-
A.101(Pressure test)	-	-	-
12(Charging of metal-ion batteries)	-	-	-
22.101(rated pressure)	-	-	-
22.102(Closed water heaters)	-	-	-
22.103(Addition)	-	-	-
22.104(Addition)	-	-	-
22.105(Cistern-type water heaters)	-	-	-
22.109(Addition)	-	-	-

04 Jul, 2027

-
Included w.e.f 01.01.2025 Exclusion : Cl 19.11.4.1- Cl 19.11.4.7 (EMI/EMC), Cl 24(Components)

IS 302 : Part 2 : Sec 23 (2009)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 23 appliances for skin or hair care (First Revision)

24000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
32(Radiation ,Toxicity and similar hazards)	-	1000	5 % Discount (BIS)
31(Resistance to Rusting)	-	1000	5 % Discount (BIS)
30(Resistance to Heat & Fire)	-	1000	5 % Discount (BIS)
29(Clearances, Creepage Distances & Solid Insulation)	-	1000	5 % Discount (BIS)
28(Screws & Connection)	-	1000	5 % Discount (BIS)
27(Provision For Earthing)	-	1000	5 % Discount (BIS)
26(Terminals For External Conductors)	-	1000	5 % Discount (BIS)
25(Supply Connection & External Flexible Cables and Cords)	-	1000	5 % Discount (BIS)
23(Internal wiring)	-	1000	5 % Discount (BIS)
22(Construction)	-	1000	5 % Discount (BIS)
21(Mechanical strength)	-	1000	5 % Discount (BIS)
20(Stability & Mechanical Hazards)	-	1000	5 % Discount (BIS)
19(Abnormal Operation)	-	1000	5 % Discount (BIS)
18(Endurance)	-	1000	5 % Discount (BIS)
17(Overload Protection/ Overload Protection of Transformers & Associated Circuits)	-	1000	5 % Discount (BIS)
16(Leakage Current and Electric Strength)	-	1000	5 % Discount (BIS)
15(Moisture Resistance)	-	1000	5 % Discount (BIS)
14(Transient Over Voltage)	-	1000	5 % Discount (BIS)
13(Leakage Current and Electric Strength at Operating Temperature)	-	1000	5 % Discount (BIS)
11(Temperature Rise/Heating)	-	1000	5 % Discount (BIS)
10(Power Input & Current)	-	1000	5 % Discount (BIS)
9(Starting Of Motor Operated Appliances)	-	1000	5 % Discount (BIS)
8(Protection against Electric Shock/ Protection against Access to Live Parts)	-	1000	5 % Discount (BIS)
7(Marking/ Marking & Instructions)	-	1000	5 % Discount (BIS)
6(Classification)	-	1000	5 % Discount (BIS)
22.32(CONSTRUCTION)	-	1000	5 % Discount (BIS)

04 Jul, 2027

-
Included w.e.f. 24.12.2024. Excluding: 19.11.4.1 (Electrostatic discharges), 19.11.4.2 (Radiated fields), 19.11.4.3 (Fast transient bursts), 19.11.4.4 (Surge immunity test), 19.11.4.5 (Immunity to conducted discharges), 19.11.4.6 (Class 3 Voltage dips and interruptions), 19.11.4.7 (Harmonics), 24 (Components)

Bureau of Indian Standards

The National Standards Body of India

ACCURATE TEST SOLUTIONS LLP (F21), NOIDA

F 21 SECTOR 11 NOIDA 201301, NOIDA, Gautam Buddha Nagar, Uttar Pradesh, 201301

9810820552 -

Scope List