| 1 |
Elutech Laboratory and Calibration Services, Jaipur
| 9179806
| IS 1117 (2018) |
Laboratory glassware - Single - Volume pipettes (Second Revision) |
Class- A, AS & B, Cap. upto 100 ml, Both One & Two mark |
15000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 6.1.1&3(Marking) |
- |
15000 |
|
Complete testing charges for the product (Excluding raw material) is Rs. 15000 |
| 3(Class of Accuracy) |
- |
15000 |
|
- |
| 4.1(Nominal capacities) |
- |
15000 |
|
- |
| 4.2(Accuracy) |
- |
15000 |
|
- |
| 5.1(Material) |
- |
15000 |
|
- |
| 5.1.1(Limit of Alkalinity) |
- |
15000 |
|
- |
| 5.2(Pattern of Pipette) |
- |
15000 |
|
- |
| 5.3(Workmanship & Finish) |
- |
15000 |
|
- |
| 5.4(i) Distance of graduation line from top of pipette.) |
- |
15000 |
|
- |
| 5.4(ii) Distance from graduation line to top of bulb(pattern 2)) |
- |
15000 |
|
- |
| 5.4(iii)Distance from graduation line to tip of jet (Pattern 1)) |
- |
15000 |
|
- |
| 5.4(iv) Wall thickness) |
- |
15000 |
|
- |
| 5.4(a) pattern 2 pipette of 1 and 2ml ) |
- |
15000 |
|
- |
| 5.4(b) Other pipettes) |
- |
15000 |
|
- |
| 5.4(v) Dia. of safety bulb (if provided )) |
- |
15000 |
|
- |
| 5.4(vi)Distance from top of pipette to bottom of safety bulb ) |
- |
15000 |
|
- |
| 5.4(vii) Overall length, L) |
- |
15000 |
|
- |
| 5.4(viii) Length of suction tube, L1 ) |
- |
15000 |
|
- |
| 5.4(ix) Length of delivery tube, L2 ) |
- |
15000 |
|
- |
| 5.4(x) Internal dia. of suction tube D1 ) |
- |
15000 |
|
- |
| 5.4(xi) External dia. of bulb D2 ) |
- |
15000 |
|
- |
| 5.4(xii) External dia. of delivery tube D3 ) |
- |
15000 |
|
- |
| 5.5(Delivery Time) |
- |
15000 |
|
- |
| 5.5(Delivery Time) |
- |
15000 |
|
- |
| 5.6&7(Graduation line & Visibility ) |
- |
15000 |
|
- |
| 6.1.2(Marking) |
- |
15000 |
|
- |
| 6.1.1&3(Marking) |
- |
15000 |
|
- |
| 3(Class of Accuracy) |
- |
15000 |
|
- |
| 4.1(Nominal capacities) |
- |
15000 |
|
- |
| 4.2(Accuracy) |
- |
15000 |
|
- |
| 5.1(Material) |
- |
15000 |
|
- |
| 5.1(Material) |
- |
15000 |
|
- |
| 5.1.1(Limit of Alkalinity) |
- |
15000 |
|
- |
| 5.2(Pattern of Pipette) |
- |
15000 |
|
- |
| 5.3(Workmanship & Finish) |
- |
15000 |
|
- |
| 5.4(i) Distance of graduation line from top of pipette.) |
- |
15000 |
|
- |
| 5.4(ii) Distance from graduation line to top of bulb(pattern 2)) |
- |
15000 |
|
- |
| 5.4(iii)Distance from graduation line to tip of jet (Pattern 1)) |
- |
15000 |
|
- |
| 5.4(iv) Wall thickness) |
- |
15000 |
|
- |
| 5.4(a) pattern 2 pipette of 1 and 2ml ) |
- |
15000 |
|
- |
| 5.4(b) Other pipettes) |
- |
15000 |
|
- |
| 5.4(v) Dia. of safety bulb (if provided )) |
- |
15000 |
|
- |
| 5.4(vi)Distance from top of pipette to bottom of safety bulb ) |
- |
15000 |
|
- |
| 5.4(vii) Overall length, L) |
- |
15000 |
|
- |
| 5.4(viii) Length of suction tube, L1 ) |
- |
15000 |
|
- |
| 5.4(ix) Length of delivery tube, L2 ) |
- |
15000 |
|
- |
| 5.4(x) Internal dia. of suction tube D1 ) |
- |
15000 |
|
- |
| 5.4(xi) External dia. of bulb D2 ) |
- |
15000 |
|
- |
| 5.4(xii) External dia. of delivery tube D3 ) |
- |
15000 |
|
- |
| 5.5(Delivery Time) |
- |
15000 |
|
- |
| 5.5(Delivery Time) |
- |
15000 |
|
- |
| 5.6&7(Graduation line & Visibility ) |
- |
15000 |
|
- |
| 6.1.2(Marking) |
- |
15000 |
|
- |
| 6.1.1&3(Marking) |
- |
15000 |
|
- |
| 3(Class of Accuracy) |
- |
15000 |
|
- |
| 4.1(Nominal capacities) |
- |
15000 |
|
- |
| 4.2(Accuracy) |
- |
15000 |
|
- |
| 5.1(Material) |
- |
15000 |
|
- |
| 5.1(Material) |
- |
15000 |
|
- |
| 5.1.1(Limit of Alkalinity) |
- |
15000 |
|
- |
| 5.2(Pattern of Pipette) |
- |
15000 |
|
- |
| 5.3(Workmanship & Finish) |
- |
15000 |
|
- |
| 5.4(i) Distance of graduation line from top of pipette.) |
- |
15000 |
|
- |
| 5.4(ii) Distance from graduation line to top of bulb(pattern 2)) |
- |
15000 |
|
- |
| 5.4(iii)Distance from graduation line to tip of jet (Pattern 1)) |
- |
15000 |
|
- |
| 5.4(iv) Wall thickness) |
- |
15000 |
|
- |
| 5.4(a) pattern 2 pipette of 1 and 2ml ) |
- |
15000 |
|
- |
| 5.4(b) Other pipettes) |
- |
15000 |
|
- |
| 5.4(v) Dia. of safety bulb (if provided )) |
- |
15000 |
|
- |
| 5.4(vi)Distance from top of pipette to bottom of safety bulb ) |
- |
15000 |
|
- |
| 5.4(vii) Overall length, L) |
- |
15000 |
|
- |
| 5.4(viii) Length of suction tube, L1 ) |
- |
15000 |
|
- |
| 5.4(ix) Length of delivery tube, L2 ) |
- |
15000 |
|
- |
| 5.4(x) Internal dia. of suction tube D1 ) |
- |
15000 |
|
- |
| 5.4(xi) External dia. of bulb D2 ) |
- |
15000 |
|
- |
| 5.4(xii) External dia. of delivery tube D3 ) |
- |
15000 |
|
- |
| 5.5(Delivery Time) |
- |
15000 |
|
- |
| 5.5(Delivery Time) |
- |
15000 |
|
- |
| 5.6&7(Graduation line & Visibility ) |
- |
15000 |
|
- |
| 6.1.2(Marking) |
- |
15000 |
|
- |
| 5.1(Material) |
- |
15000 |
|
- |
| 4.1(unit of volume) |
- |
15000 |
|
- |
| 4.2(delivery volume) |
- |
15000 |
|
- |
| 4.3(reference temperature) |
- |
15000 |
|
- |
| 5.1(Types and Classes of accuracy) |
- |
15000 |
|
- |
| 5.2(Types of single- volume pipette) |
- |
15000 |
|
- |
| Clause- 6.0(Maximum Permissible error) |
- |
15000 |
|
- |
| 7.1(Material) |
- |
15000 |
|
- |
| 7.2(Shape) |
- |
15000 |
|
- |
| 7.3(Bulb) |
- |
15000 |
|
- |
| 7.4(Dimensions) |
- |
15000 |
|
- |
| 7.5(Top of Pipette) |
- |
15000 |
|
- |
| 7.6(Delivery Jet) |
- |
15000 |
|
- |
| 7.7(Delivery Time) |
- |
15000 |
|
- |
| 7.8(Waiting Time) |
- |
15000 |
|
- |
| Clause- 8.0(Graduation Line) |
- |
15000 |
|
- |
| Clause- 9.0(Setting of the Meniscus) |
- |
15000 |
|
- |
| Clause-10.0(Marking) |
- |
15000 |
|
- |
| Cl-7.4, Table-2 (i)(Overall length) |
- |
15000 |
|
- |
| Cl-7.4, Table-2 (ii)(Internal diameter at the graduation line) |
- |
15000 |
|
- |
| Cl-7.4, Table-2 (iii)(Length of suction tube⎯ valid only for bulb pattern pipettes) |
- |
15000 |
|
- |
| Cl-7.4, Table-2 (iv)(Length of delivery tube ⎯ valid only for bulb pattern pipettes) |
- |
15000 |
|
- |
| Cl-7.4, Table-2 (v)(External diameter of delivery tube
⎯ valid only for bulb pattern pipettes) |
- |
15000 |
|
- |
| Cl-7.4, Table-2 (vi)(External diameter of bulb ⎯ valid only for bulb pattern pipettes) |
- |
15000 |
|
- |
| Cl-7.4, Table-2 (vii)(External diameter of tube
⎯ valid only for straight pattern pipettes) |
- |
15000 |
|
- |
| Cl-7.4, Table-3 (i)(Distance of graduation line from top of pipette (one-mark pipettes)) |
- |
15000 |
|
- |
| Cl-7.4, Table-3 (ii)(Distance from graduation line to tip of jet (one-mark pipettes)
⎯ valid only for straight pattern pipettes) |
- |
15000 |
|
- |
| Cl-7.4, Table-3 (iii)(Distance from graduation line to tip of jet (one-mark pipettes)
⎯ valid only for straight pattern pipettes) |
- |
15000 |
|
- |
| Cl-7.4, Table-3 (iv)(Wall thickness (one-mark pipettes)
⎯ bulb pattern pipettes) |
- |
15000 |
|
- |
| Cl-7.4, Table-3 (v)(Wall thickness (one-mark pipettes)
⎯ straight pattern pipettes) |
- |
15000 |
|
- |
| Cl-7.4, Table-4 (i)(Distance of upper graduation line from top of pipette (two-mark pipettes)) |
- |
15000 |
|
- |
| Cl-7.4, Table-4 (ii)(Distance of upper graduation line from top of pipette (two-mark pipettes)) |
- |
15000 |
|
- |
| Cl-7.4, Table-4 (iii)(Distance from upper graduation line to tip of jet (two-mark pipettes)
⎯ valid only for straight pattern pipettes) |
- |
15000 |
|
- |
| Cl-7.4, Table-4 (iv)(Distance from lower graduation line to bottom of bulb (two-mark pipettes)) |
- |
15000 |
|
- |
| Cl-7.4, Table-4 (v)(Distance from lower graduation line to tip of jet (two-mark pipettes)) |
- |
15000 |
|
- |
| Cl-7.4, Table-4 (vi)(Wall thickness (two-mark pipettes)
⎯ bulb pattern pipettes) |
- |
15000 |
|
- |
| Cl-7.4, Table-4 (vii)(Wall thickness (two-mark pipettes)
⎯ straight pattern pipettes) |
- |
15000 |
|
- |
| Cl-11(Visibility of graduation lines, figures and inscriptions) |
- |
15000 |
|
- |
| Cl-12(Colour coding) |
- |
15000 |
|
- |
| Cl-12(Colour coding) |
- |
15000 |
|
- |
|
- |
-
- |
| 2 |
Bharat Test House Pvt. Ltd. 1668 Sonipat
| 9168306
| IS 16172 (2023) |
Reinforcement Couplers for Mechanical Splices of Steel Bars in Concrete ? Specification (first revision) |
- |
25000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 5(Classification) |
- |
900 |
|
- |
| 6(Manufacture) |
- |
100 |
|
- |
| 7(Workmanship and Finish) |
- |
500 |
|
- |
| 8(Nominal Sizes) |
- |
1000 |
|
- |
| 9.2.1(Tensile Strength) |
- |
5000 |
|
- |
| 9.2.1.1(Disengagement test for threaded couplers) |
- |
0 |
|
- |
| 9.2.2(Percentage Elongation) |
- |
2500 |
|
- |
| 9.3(Slip Test) |
- |
5000 |
|
- |
| 9.4(Cyclic Tensile Test) |
- |
5000 |
|
- |
| 9.5.1(Low cycle Fatigue Test) |
- |
2500 |
|
- |
| 9.5.2(High Cycle Fatigue test) |
- |
2500 |
|
- |
|
26 Jul, 2027 |
-
- |
| 3 |
BIS, Central Laboratory (CL)
| None
| IS 2692 (1989) |
Ferrules for water services ? specification |
All |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4.1 (Nominal Size ) |
- |
|
|
|
|
- |
-
- |
| 4 |
Testtex India Laboratories Pvt. Ltd., Mumbai
| 7126506
| IS 5405 (2025) |
Disposable Sanitary Napkin/Panty Liner/Maternity Pad/Period Panty - Specification ( Third Revision ) |
Regular, Large, XL, Double XL |
15000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 3.1(Cover/Top sheet) |
- |
500 |
|
Complete Test Charges - Rs 15,000 + GST [Including Cl.7.6-Phthalates]; All Prices are Except Cl.7.4 - Biocompatibility Evaluation-Cytotoxicity, Irritation and Skin Sensitization & |
| 3.2(Absorbent core) |
- |
500 |
|
Cl.7.5 - Biodegradability and Compost ability (Optional Tests, Cl 7.7 Anti Bacterial Activity Value - Rs 4000 + GST) (10% Discount to BIS for Complete Testing) |
| 4.1(Types) |
- |
200 |
|
- |
| 4.2(shapes) |
- |
200 |
|
- |
| 5(Sizes) |
- |
500 |
|
- |
| Cl. 5 Table-1(Type) |
- |
200 |
|
- |
| Cl. 5 Table-1(Size class) |
- |
500 |
|
- |
| Cl. 5 Table-1(Length (Absorbent core only)) |
- |
500 |
|
- |
| Cl. 5 Table-1(Width (Absorbent core only)) |
- |
500 |
|
- |
| 6.1(Manufacture, workmanship and finish) |
- |
400 |
|
- |
| 6.2(Manufacture, workmanship and finish) |
- |
400 |
|
- |
| 7.1(pH value (IS 1390)) |
- |
400 |
|
- |
| 7.2(Ability to withstand Pressure after absorption) |
- |
600 |
|
- |
| Cl 7.5(Phthalate test- Combination) |
- |
4000 |
|
- |
| 3.1(Cover/Top Sheet (non sterile gauze)) |
- |
500 |
|
- |
| 3.1(Cover/Top Sheet (sterile gauze)) |
- |
500 |
|
- |
| 5(Size) |
- |
500 |
|
for all charges |
| Cl 7.5(Phthalate test- Di-iso-butyl phthalate (DIBP)) |
- |
0 |
|
- |
| Cl 7.5(Phthalate Test- Di-n-butyl phthalate (DBP)) |
- |
0 |
|
- |
| Cl 7.5(Phthalate Test- Benzylbutyl Phthalate (BBP)) |
- |
0 |
|
- |
| Cl 7.5(Phthalate Test- Bis-(2-ethylhexyl) phthalate (DEHP)) |
- |
0 |
|
- |
| Cl 7.5(Phthalate Test- Di-n-octyl phthalate (DNOP)) |
- |
0 |
|
- |
| Cl 7.5(Phthalate Test- Di-iso-nonylphthalate (DINP)) |
- |
0 |
|
- |
| Cl 7.5(Phthalate Test- Di-iso-decyl phthalate (DIDP)) |
- |
0 |
|
- |
|
08 Apr, 2028 |
-
- |
| 5 |
Envirocare Labs Pvt Ltd, Thane
| 7120616
| IS 5405 (2025) |
Disposable Sanitary Napkin/Panty Liner/Maternity Pad/Period Panty - Specification ( Third Revision ) |
Thick napkins and thin napkins |
10800 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 3.1(Cover/Top sheet) |
- |
0 |
|
- |
| 3.2(Absorbent core) |
- |
0 |
|
- |
| 3.3(Barrier or bottom sheet) |
- |
0 |
|
- |
| 4.1(Types) |
- |
100 |
|
- |
| 4.2(shapes) |
- |
100 |
|
- |
| 5(Sizes) |
- |
50 |
|
- |
| Cl. 5 Table-1(Type) |
- |
0 |
|
- |
| Cl. 5 Table-1(Size class) |
- |
0 |
|
- |
| Cl. 5 Table-1(Length (Absorbent core only)) |
- |
0 |
|
- |
| Cl. 5 Table-1(Width (Absorbent core only)) |
- |
0 |
|
- |
| 6.1(Manufacture, workmanship and finish) |
- |
0 |
|
- |
| 6.2(Manufacture, workmanship and finish) |
- |
0 |
|
- |
| 7.1(pH value (IS 1390)) |
- |
150 |
|
- |
| 7.2(Ability to withstand Pressure after absorption) |
- |
500 |
|
- |
| 7.3.1(Bacterial and Fungal Bioburden) |
- |
1000 |
|
- |
| 7.3.2(Staphylococcus aureus) |
- |
400 |
|
- |
| Cl 7.5(Phthalate test- Combination) |
- |
8500 |
|
- |
| 3.1(Cover/Top Sheet (non sterile gauze)) |
- |
0 |
|
- |
| 3.1(Cover/Top Sheet (sterile gauze)) |
- |
0 |
|
- |
| 5(Size) |
- |
0 |
|
- |
| Cl 7.5(Phthalate test- Di-iso-butyl phthalate (DIBP)) |
- |
0 |
|
- |
| Cl 7.5(Phthalate Test- Di-n-butyl phthalate (DBP)) |
- |
0 |
|
- |
| Cl 7.5(Phthalate Test- Benzylbutyl Phthalate (BBP)) |
- |
0 |
|
- |
| Cl 7.5(Phthalate Test- Bis-(2-ethylhexyl) phthalate (DEHP)) |
- |
0 |
|
- |
| Cl 7.5(Phthalate Test- Di-n-octyl phthalate (DNOP)) |
- |
0 |
|
- |
| Cl 7.5(Phthalate Test- Di-iso-nonylphthalate (DINP)) |
- |
0 |
|
- |
| Cl 7.5(Phthalate Test- Di-iso-decyl phthalate (DIDP)) |
- |
0 |
|
- |
|
25 May, 2027 |
-
- |
| 6 |
ALPHA TEST HOUSE PVT LTD, BAHADURGARH
| 8185306
| IS 16647 (2017) |
Oriented unplasticized polyvinyl chloride (Pvc - O) pipes for water supply - Specification |
ALL |
49000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 5.5( Density, g/cc) |
- |
1500 |
|
- |
| 9 /9.1 / 27 degree centigrate(MECHANICAL CHARACTERISTICS OF PIPES9./ Resistance to Hydrostatic Pressure) |
- |
1500 |
|
- |
| 7.3( Opacity) |
- |
1500 |
|
- |
| 9.2, table -11( Resistance to External Blows at 0 °C) |
- |
1500 |
|
- |
| 8.2 table-9( Pipe Ends) |
- |
1500 |
|
- |
| 5 / 5.1(MATERIALS ) |
- |
1500 |
|
- |
| 5.3(VCM Content) |
- |
1500 |
|
- |
| 5.4( K-Value) |
- |
1500 |
|
- |
| 5.6 / 5.6.1( Material Classification, table -1) |
- |
1500 |
|
- |
| 6.0(CLASSIFICATION OF PIPES, table-2) |
- |
1500 |
|
- |
| 7, see 8.3 and fig-1( GENERAL REQUIREMENTS OF PIPES/ visual appearance) |
- |
1500 |
|
- |
| 7.2( Colour) |
- |
1500 |
|
- |
| 8.1.1, 8.1.1.2, table-3(Dimension of Pipes / Diameter/8.1.1.2 Diameter at any point) |
- |
1500 |
|
- |
| 8.1.2, table 4 to 7(Wall Thickness) |
- |
1500 |
|
- |
| 8.1.3 (Length, meter) |
- |
1500 |
|
- |
| 8.2 table-9(Dimensions of Integral Socket) |
- |
1500 |
|
- |
| 9.3 table-12( Ring Stiffness) |
- |
1500 |
|
- |
| 9.4, annexure-E( Orientation Factor) |
- |
1500 |
|
- |
| 10, table-13( PHYSICAL AND 1CHARACTERISTICS) |
- |
1500 |
|
- |
| 11,11.1( MECHANICAL CHARACTERISTICS OF ASSEMBLIES INCLUDING JOINTS/ 11.1 Assemblies with Non-End-Load-Bearing Joints) |
- |
1500 |
|
- |
| 11.2 / 11.2.1( Short-Term Pressure Test for Leak Tightness of Assemblies) |
- |
1500 |
|
- |
| 11.3( Short-Term Negative Pressure Test for Leak Tightness of Assemblies) |
- |
1500 |
|
- |
| 12(a)( ELASTOMERIC SEALS) |
- |
1500 |
|
- |
| 12(b)( ELASTOMERIC SEALS) |
- |
1500 |
|
- |
| Cl.10, Table 10/1(Vicat Softening Temp (C)) |
- |
1500 |
|
- |
| Cl.10, Table 10/2(Effect on Water) |
- |
1500 |
|
- |
| Cl.10, Table 10/3(Resistant to di-chloromethane (Degree of gelation)) |
- |
1500 |
|
- |
| Cl.10, Table 10/4(Alternate Test (Tensile test)) |
- |
1500 |
|
- |
|
08 May, 2028 |
-
Included w.e.f. 21.08.2025 |
| 7 |
SHRI KRISHNA TEST HOUSE PVT LTD (142)
| 8185606
| IS 4246 (2025) |
DOMESTIC GAS STOVE AND BUILT IN HOB FOR USE WITH LPG SPECIFICATION (Sixth Revision ) |
ALL |
40000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4.1(General - IS 4246 : 2025) |
- |
40000 |
|
- |
| 4.1(General - IS 4246 : 2025) |
- |
40000 |
|
- |
| 4.1.1(General - IS 4246 : 2025) |
- |
40000 |
|
- |
| 5(Materials - Cl. 5 of IS 5116) |
- |
40000 |
|
- |
| 5.1.1(Materials - Toughened glass, if provided,) |
- |
40000 |
|
- |
| 5.1.1(Materials - Toughened glass, if provided,) |
- |
40000 |
|
- |
| 5.1.1(Materials - Toughened glass, if provided,) |
- |
40000 |
|
- |
| 5.1.1(Materials - Toughened glass, if provided,) |
- |
40000 |
|
- |
| 5.1.1(Materials - Toughened glass, if provided,) |
- |
40000 |
|
- |
| 5.1.1(Materials - Toughened glass, if provided,) |
- |
40000 |
|
- |
| 5.1.1(Materials - Toughened glass, if provided,) |
- |
40000 |
|
- |
| 5.1.1(Materials - Toughened glass, if provided,) |
- |
40000 |
|
- |
| 5.1.1(Materials - Toughened glass, if provided,) |
- |
40000 |
|
- |
| 5.1(Materials - IS 5116) |
- |
40000 |
|
- |
| 5.1(Materials - IS 5116) |
- |
40000 |
|
- |
| 5.1.1(Materials - IS 5116) |
- |
40000 |
|
- |
| 5.1.1(Materials - IS 5116) |
- |
40000 |
|
- |
| 5.2(Materials - IS 5116) |
- |
40000 |
|
- |
| 5.2(Materials - IS 5116) |
- |
40000 |
|
- |
| 5.3(Materials - IS 5116) |
- |
40000 |
|
- |
| 5.5(Materials - IS 5116) |
- |
40000 |
|
- |
| 5.5(Materials - IS 5116) |
- |
40000 |
|
- |
| 5.5(Materials - IS 5116) |
- |
40000 |
|
- |
| 5.7(Materials - IS 5116) |
- |
40000 |
|
- |
| 6.1(Design for Maintainance) |
- |
40000 |
|
- |
| 6.1(Design for Maintainance) |
- |
40000 |
|
- |
| 6.2(Design for Maintainance) |
- |
40000 |
|
- |
| 6.2(Design for Maintainance) |
- |
40000 |
|
- |
| 6.3(Design for Maintainance) |
- |
40000 |
|
- |
| 6.4(Design for Maintainance) |
- |
40000 |
|
- |
| 6.5(Design for Maintainance) |
- |
40000 |
|
- |
| 6.6(Design for Maintainance) |
- |
40000 |
|
- |
| 7.0(Rigidity and Stability) |
- |
40000 |
|
- |
| 7.1(Rigidity and Stability) |
- |
40000 |
|
- |
| 7.2(Rigidity and Stability) |
- |
40000 |
|
- |
| 7.3(Rigidity and Stability) |
- |
40000 |
|
- |
| 8.1(Workmanship and Finish - Cl. 7 of IS 5116) |
- |
40000 |
|
- |
| 8.1(Workmanship and Finish - Cl. 7 of IS 5116) |
- |
40000 |
|
- |
| 8.1(Workmanship and Finish - Cl. 7 of IS 5116) |
- |
40000 |
|
- |
| 8.1(Workmanship and Finish - Cl. 7 of IS 5116) |
- |
40000 |
|
- |
| 8.1(Workmanship and Finish - Cl. 7 of IS 5116) |
- |
40000 |
|
- |
| 8.1(Workmanship and Finish - Cl. 7 of IS 5116) |
- |
40000 |
|
- |
| 8.1(Workmanship and Finish - Cl. 7 of IS 5116) |
- |
40000 |
|
- |
| 8.1(Workmanship and Finish - Cl. 7 of IS 5116) |
- |
40000 |
|
- |
| 8.1(Workmanship and Finish - Cl. 7 of IS 5116) |
- |
40000 |
|
- |
| 8.1(Workmanship and Finish - Cl. 7 of IS 5116) |
- |
40000 |
|
- |
| 8.1(Workmanship and Finish - Cl. 7 of IS 5116) |
- |
40000 |
|
- |
| 8.1(Workmanship and Finish - Cl. 7 of IS 5116) |
- |
40000 |
|
- |
| 8.2(Workmanship and Finish -) |
- |
40000 |
|
- |
| 8.3(Workmanship and Finish -) |
- |
40000 |
|
- |
| 9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1)) |
- |
40000 |
|
- |
| 9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1)) |
- |
40000 |
|
- |
| 9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1)) |
- |
40000 |
|
- |
| 9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1)) |
- |
40000 |
|
- |
| 9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1)) |
- |
40000 |
|
- |
| 9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1)) |
- |
40000 |
|
- |
| 9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1)) |
- |
40000 |
|
- |
| 9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1)) |
- |
40000 |
|
- |
| 9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1)) |
- |
40000 |
|
- |
| 9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1)) |
- |
40000 |
|
- |
| 9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1)) |
- |
40000 |
|
- |
| 9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1)) |
- |
40000 |
|
- |
| 9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1)) |
- |
40000 |
|
- |
| 9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1)) |
- |
40000 |
|
- |
| 9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1)) |
- |
40000 |
|
- |
| 9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1)) |
- |
40000 |
|
- |
| 9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1)) |
- |
40000 |
|
- |
| 9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1)) |
- |
40000 |
|
- |
| 9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1)) |
- |
40000 |
|
- |
| 9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1)) |
- |
40000 |
|
- |
| 9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1)) |
- |
40000 |
|
- |
| 9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1)) |
- |
40000 |
|
- |
| 9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1)) |
- |
40000 |
|
- |
| 10(Injector Jets) |
- |
40000 |
|
- |
| 10(Injector Jets) |
- |
40000 |
|
- |
| 10(Injector Jets) |
- |
40000 |
|
- |
| 10(Injector Jets) |
- |
40000 |
|
- |
| 10(Injector Jets) |
- |
40000 |
|
- |
| 10(Injector Jets) |
- |
40000 |
|
- |
| 11.1(Burners- Cl. 10 of IS 5116) |
- |
40000 |
|
- |
| 11.1(Burners- Cl. 10 of IS 5116) |
- |
40000 |
|
- |
| 11.1(Burners- Cl. 10 of IS 5116) |
- |
40000 |
|
- |
| 11.1(Burners- Cl. 10 of IS 5116) |
- |
40000 |
|
- |
| 11.1(Burners- Cl. 10 of IS 5116) |
- |
40000 |
|
- |
| 11.2(Burners) |
- |
40000 |
|
- |
| 11.3(Burners) |
- |
40000 |
|
- |
| 11.4(Burners) |
- |
40000 |
|
- |
| 12.1(Burner Pan Support) |
- |
40000 |
|
- |
| 12.2(Burner Pan Support) |
- |
40000 |
|
- |
| 12.3(Burner Pan Support) |
- |
40000 |
|
- |
| 13.1(Gas Soundness Test - Cl. 16 of IS 5116) |
- |
40000 |
|
- |
| 13,2(Gas Soundness Test) |
- |
40000 |
|
- |
| 13.2(Gas Leak Detector) |
- |
40000 |
|
- |
| 14.1(Gas Inlet Connection - Cl. 18 of IS 5116) |
- |
40000 |
|
- |
| 14.1(Gas Inlet Connection - Cl. 18 of IS 5116) |
- |
40000 |
|
- |
| 14.1(Gas Inlet Connection - Cl. 18 of IS 5116) |
- |
40000 |
|
- |
| 14.1(Gas Inlet Connection - Cl. 18 of IS 5116) |
- |
40000 |
|
- |
| 14.1(Gas Inlet Connection - Cl. 18 of IS 5116) |
- |
40000 |
|
- |
| 14.1(Gas Inlet Connection - Cl. 18 of IS 5116) |
- |
40000 |
|
- |
| 14.1(Gas Inlet Connection - Cl. 18 of IS 5116) |
- |
40000 |
|
- |
| 14.1(Gas Inlet Connection - Cl. 18 of IS 5116) |
- |
40000 |
|
- |
| 14.1(Gas Inlet Connection - Cl. 18 of IS 5116) |
- |
40000 |
|
- |
| 14.1(Gas Inlet Connection - Cl. 18 of IS 5116) |
- |
40000 |
|
- |
| 14.1(Gas Inlet Connection - Cl. 18 of IS 5116) |
- |
40000 |
|
- |
| 14.1(Gas Inlet Connection - Cl. 18 of IS 5116) |
- |
40000 |
|
- |
| 14.1(Gas Inlet Connection - Cl. 18 of IS 5116) |
- |
40000 |
|
- |
| 14.2(Gas Inlet Connection) |
- |
40000 |
|
- |
| 14.2(Gas Inlet Connection) |
- |
40000 |
|
- |
| 14.2(Gas Inlet Connection) |
- |
40000 |
|
- |
| 14.2(Gas Inlet Connection) |
- |
40000 |
|
- |
| 14.3(Gas Inlet Connection) |
- |
40000 |
|
- |
| 14.4(Gas Inlet Connection) |
- |
40000 |
|
- |
| 14.5(Gas Inlet Connection - Cl. 17.3 of IS 5116) |
- |
40000 |
|
- |
| 14.6(Gas Inlet Connection) |
- |
40000 |
|
- |
| 15.0(Strength and Rigidity) |
- |
40000 |
|
- |
| 15.0(Strength and Rigidity) |
- |
40000 |
|
- |
| 15.0(Strength and Rigidity) |
- |
40000 |
|
- |
| 15.0(Strength and Rigidity) |
- |
40000 |
|
- |
| 17.0(Gas Consumption Test) |
- |
40000 |
|
- |
| 17.0(Gas Consumption Test) |
- |
40000 |
|
- |
| 17.0(Gas Consumption Test) |
- |
40000 |
|
- |
| 17.0(Gas Consumption Test) |
- |
40000 |
|
- |
| 17.0(Gas Consumption Test) |
- |
40000 |
|
- |
| 17.0(Gas Consumption Test) |
- |
40000 |
|
- |
| 17.2(Gas Consumption Test - For Gas Stoves) |
- |
40000 |
|
- |
| 17.2 (a)(Gas Consumption Test - For Gas Stoves) |
- |
40000 |
|
- |
| 17.2 (b)(Gas Consumption Test - For Gas Stoves) |
- |
40000 |
|
- |
| 17.2 (c)(Gas Consumption Test - For Gas Stoves) |
- |
40000 |
|
- |
| 17.3(Gas Consumption Test - For Built in Hobs) |
- |
40000 |
|
- |
| 17.3.1(Gas Consumption Test - For Built in Hobs) |
- |
40000 |
|
- |
| 17.3.2(Gas Consumption Test - For Built in Hobs) |
- |
40000 |
|
- |
| 18.1(Ignition and Flame Travel) |
- |
40000 |
|
- |
| 18.1(Ignition and Flame Travel) |
- |
40000 |
|
- |
| 18.2(Ignition and Flame Travel) |
- |
40000 |
|
- |
| 18.3(Ignition and Flame Travel) |
- |
40000 |
|
- |
| 18.4(Ignition and Flame Travel - Cl. 14 of IS 5116) |
- |
40000 |
|
- |
| 18.4(Ignition and Flame Travel - Cl. 14 of IS 5116) |
- |
40000 |
|
- |
| 18.4(Ignition and Flame Travel - Cl. 14 of IS 5116) |
- |
40000 |
|
- |
| 18.4(Ignition and Flame Travel - Cl. 14 of IS 5116) |
- |
40000 |
|
- |
| 18.4(Ignition and Flame Travel - Cl. 14 of IS 5116) |
- |
40000 |
|
- |
| 18.4(Ignition and Flame Travel - Cl. 14 of IS 5116) |
- |
40000 |
|
- |
| 19.1(Flame Stability) |
- |
40000 |
|
- |
| 19.1.1(Flame Stability) |
- |
40000 |
|
- |
| 19.2(Flame Stability) |
- |
40000 |
|
- |
| 19.3(Flame Stability) |
- |
40000 |
|
- |
| 20(Noise Control) |
- |
40000 |
|
- |
| 21(Flash Back) |
- |
40000 |
|
- |
| 22(Formation of Soot) |
- |
40000 |
|
- |
| 23(Resistance to Draught) |
- |
40000 |
|
- |
| 24.1(Combustion) |
- |
40000 |
|
- |
| 24.1(Combustion) |
- |
40000 |
|
- |
| 24.2(Combustion) |
- |
40000 |
|
- |
| 25.1(Fire Hazard and Limiting Temperatures) |
- |
40000 |
|
- |
| 25.1(Fire Hazard and Limiting Temperatures) |
- |
40000 |
|
- |
| 25.1(Fire Hazard and Limiting Temperatures) |
- |
40000 |
|
- |
| 25.1(Fire Hazard and Limiting Temperatures) |
- |
40000 |
|
- |
| 25.2(Fire Hazard and Limiting Temperatures) |
- |
40000 |
|
- |
| 26.1(Thermal Efficiency- Gas Stoves) |
- |
40000 |
|
- |
| 26.1(Thermal Efficiency- Gas Stoves) |
- |
40000 |
|
- |
| 26.1(Thermal Efficiency- Gas Stoves) |
- |
40000 |
|
- |
| 26.1(Thermal Efficiency- Gas Stoves) |
- |
40000 |
|
- |
| 26.1(Thermal Efficiency- Gas Stoves) |
- |
40000 |
|
- |
| 26.2(Thermal Efficiency- For Built in Hobs) |
- |
40000 |
|
- |
| 26.2(Thermal Efficiency- For Built in Hobs) |
- |
40000 |
|
- |
| 26.2(Thermal Efficiency- For Built in Hobs) |
- |
40000 |
|
- |
| 26.2(Thermal Efficiency- For Built in Hobs) |
- |
40000 |
|
- |
| 26.2(Thermal Efficiency- For Built in Hobs) |
- |
40000 |
|
- |
|
13 May, 2028 |
-
Included w.e.f. 22.08.2025 |
| 8 |
DELHI TEST HOUSE (50) KUNDLI SONIPAT
| 9127026
| IS/IEC 61730 : PART 2 (2016) |
Photovoltaic (PV) module safety qualification: Part 2 requirements for testing (First Revision) |
-- |
1500000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Clause 10.2(Visual inspection MST 01) |
- |
5000 |
|
- |
| Clause 10.3(Performance at STC MST 02) |
- |
10000 |
|
- |
| Clause 10.4(Maximum powerdetermination MST 03) |
- |
10000 |
|
- |
| Clause 10.5(Insulation thickness test MST 04) |
- |
10000 |
|
- |
| Clause 10.6(Durability of markings MST 05) |
- |
5000 |
|
- |
| Clause 10.7(Sharp edge test MST 06) |
- |
100000 |
|
- |
| Clause 10.8(Bypass diode functionality test MST 07) |
- |
15000 |
|
- |
| Clause 10.9(Accessibility test MST 11) |
- |
30000 |
|
- |
| Clause 10.10(Cut susceptibility test MST 12) |
- |
20000 |
|
- |
| Clause 10.11(Continuity test of equipotential bonding MST 13) |
- |
15000 |
|
- |
| Clause 10.12(Impulse voltage test MST 14) |
- |
30000 |
|
- |
| Clause 10.13(Insulation test MST 16) |
- |
15000 |
|
- |
| Clause 10.14(Wet leakage current test MST 17) |
- |
30000 |
|
- |
| Clause 10.15(Temperature test MST 21) |
- |
15000 |
|
- |
| Clause 10.16(Hot-spot endurance test MST 22) |
- |
15000 |
|
- |
| Clause 10.17(Fire test MST 23) |
- |
50000 |
|
- |
| Clause 10.18(Ignitability test MST 24) |
- |
50000 |
|
- |
| Clause 10.19(Bypass diode thermal test MST 25) |
- |
50000 |
|
- |
| Clause 10.20(Reverse current overload test MST 26) |
- |
20000 |
|
- |
| Clause 10.21(Module breakage test MST 32) |
- |
10000 |
|
- |
| Clause 10.22(Screw connections test MST 33) |
- |
10000 |
|
- |
| Clause 10.23(Static mechanical load test MST 34) |
- |
15000 |
|
- |
| Clause 10.24(Peel test MST 35) |
- |
15000 |
|
- |
| Clause 10.25(Lap shear strength test MST 36) |
- |
10000 |
|
- |
| Clause 10.26(Materials creep test MST 37) |
- |
30000 |
|
- |
| Clause 10.27(Robustness of terminations test MST 42) |
- |
20000 |
|
- |
| Clause 10.28(Thermal cycling test MST 51) |
- |
220000 |
|
- |
| Clause 10.29(Humidity freeze test MST 52) |
- |
120000 |
|
- |
| Clause 10.30(Damp heat test MST 53) |
- |
220000 |
|
- |
| Clause 10.31(UV test MST 54) |
- |
80000 |
|
- |
| Clause 10.32(Cold conditioning MST 55) |
- |
100000 |
|
- |
| Clause 10.33(Dry heat conditioning MST 56) |
- |
100000 |
|
- |
|
23 Jun, 2028 |
-
- |
| 9 |
Sleen India Biz venture Private Limited, Agra
| 9139736
| IS 5405 (2025) |
Disposable Sanitary Napkin/Panty Liner/Maternity Pad/Period Panty - Specification ( Third Revision ) |
Sanitary Napkins |
16000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 3.1(Cover/Top sheet) |
- |
1000 |
|
- |
| 3.2(Absorbent core) |
- |
500 |
|
- |
| 3.3(Barrier or bottom sheet) |
- |
500 |
|
- |
| 4.1(Types) |
- |
200 |
|
- |
| 4.2(shapes) |
- |
300 |
|
- |
| 5(Sizes) |
- |
1000 |
|
- |
| Cl. 5 Table-1(Type) |
- |
0 |
|
Test price for Clause 5 is 1000/-. |
| Cl. 5 Table-1(Size class) |
- |
0 |
|
Test price for Clause 5 is 1000/-. |
| Cl. 5 Table-1(Length (Absorbent core only)) |
- |
0 |
|
Test price for Clause 5 is 1000/-. |
| Cl. 5 Table-1(Width (Absorbent core only)) |
- |
0 |
|
Test price for Clause 5 is 1000/-. |
| 6.1(Manufacture, workmanship and finish) |
- |
500 |
|
Test price for Clause 6 is 500/-. |
| 6.2(Manufacture, workmanship and finish) |
- |
0 |
|
Test price for Clause 6 is 500/-. |
| 7.1(pH value (IS 1390)) |
- |
1000 |
|
- |
| 7.2(Ability to withstand Pressure after absorption) |
- |
1000 |
|
- |
| 7.3.1(Bacterial and Fungal Bioburden) |
- |
2000 |
|
- |
| 7.3.2(Staphylococcus aureus) |
- |
2000 |
|
- |
| 7.4(Biocompatibility evaluation - Cytotoxicity (IS/ISO 10993 P-5)) |
- |
0 |
|
Under Exclusion. |
| 7.4(Biocompatibility evaluation - Irritation (IS 17932 P-7)) |
- |
0 |
|
Under Exclusion. |
| 7.4(Biocompatibility evaluation - skin Sensitization (Optional) (IS 17932 P-6)) |
- |
0 |
|
Under Exclusion. |
| Cl 7.5(Phthalate test- Combination) |
- |
6000 |
|
- |
| 7.6(Compostability (Optional) (IS/ISO 17088)) |
- |
0 |
|
Under Exclusion |
| 7.7(Anti bacterial activity value (Optional) (IS/ISO 20743)) |
- |
0 |
|
under exclusion |
| 3.1(Cover/Top Sheet (non sterile gauze)) |
- |
0 |
|
Test price for clause 3.1 is 800/-. |
| 3.1(Cover/Top Sheet (sterile gauze)) |
- |
0 |
|
Test price for clause 3.1 is 800/-. |
| 5(Size) |
- |
0 |
|
Test price for Clause 5 is 1000/-. |
| Cl 7.5(Phthalate test- Di-iso-butyl phthalate (DIBP)) |
- |
0 |
|
Complete test price for clause no. 7.5 is 6000/-. |
| Cl 7.5(Phthalate Test- Di-n-butyl phthalate (DBP)) |
- |
0 |
|
Complete test price for clause no. 7.5 is 6000/-. |
| Cl 7.5(Phthalate Test- Benzylbutyl Phthalate (BBP)) |
- |
0 |
|
Complete test price for clause no. 7.5 is 6000/-. |
| Cl 7.5(Phthalate Test- Bis-(2-ethylhexyl) phthalate (DEHP)) |
- |
0 |
|
Complete test price for clause no. 7.5 is 6000/-. |
| Cl 7.5(Phthalate Test- Di-n-octyl phthalate (DNOP)) |
- |
0 |
|
Complete test price for clause no. 7.5 is 6000/-. |
| Cl 7.5(Phthalate Test- Di-iso-nonylphthalate (DINP)) |
- |
0 |
|
Complete test price for clause no. 7.5 is 6000/-. |
| Cl 7.5(Phthalate Test- Di-iso-decyl phthalate (DIDP)) |
- |
0 |
|
Complete test price for clause no. 7.5 is 6000/-. |
|
15 May, 2027 |
-
- |
| 10 |
Gravitas Laboratories Private Limited, Greater Noida
| 8182606
| IS 17682 (2021) |
ALUMINIUM COMPOSITE PANEL SPECIFICATION |
Grade 1, Grade 2 and Grade 2S |
141500 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Clause 6(DIMENSIONS AND TOLERANCE) |
- |
1500 |
|
- |
| "Clause 7.1 Table 2(i)"(Density of core, g/cm) |
- |
1500 |
|
- |
| "Clause 7.1 Table 2(ii)"(Tensile strength,) |
- |
1500 |
|
- |
| "Clause 7.1 Table 2(iii)"(Yield strength) |
- |
1500 |
|
- |
| "Clause 7.1 Table 2(iv)"(Elongation) |
- |
1500 |
|
- |
| "Clause 7.1 Table 2(v)"(Peel strength, N/10 mm width, Min) |
- |
1500 |
|
- |
| "Clause 7.1 Table 3(ii)"(Coating thickness) |
- |
1500 |
|
- |
| "Clause 7.1 Table 3(iii)"(Adhesion (cross hatch)) |
- |
2500 |
|
- |
| "Clause 7.1 Table 3(iv)"(Pencil hardness, Min) |
- |
2500 |
|
- |
| "Clause 7.1 Table 3(v)"(Gloss) |
- |
1500 |
|
- |
| "Clause 7.1 Table 3(vi)"(Weatherometer test (for 4 000 h)) |
- |
10000 |
|
4000 Hr Grade 1 (680000), 1000 Hr grade 2 and 2S (580000)
Salt Spray Test: Up to 48 Hr (10000), Beyond 48 Hr - Up to 720 Hr (250000) |
| "Clause 7.1 Table 3(vii)"(Chemical resistance) |
- |
20000 |
|
- |
| Clause 6(DIMENSIONS AND TOLERANCE) |
- |
0 |
|
- |
| "Clause 7.1 Table 2(i)"(Density of core, g/cm) |
- |
0 |
|
- |
| "Clause 7.1 Table 2(ii)"(Tensile strength,) |
- |
0 |
|
- |
| "Clause 7.1 Table 2(iii)"(Yield strength) |
- |
0 |
|
- |
| "Clause 7.1 Table 2(iv)"(Elongation) |
- |
0 |
|
- |
| "Clause 7.1 Table 2(v)"(Peel strength, N/10 mm width, Min) |
- |
0 |
|
- |
| "Clause 7.1 Table 3(ii)"(Coating thickness) |
- |
0 |
|
- |
| "Clause 7.1 Table 3(iii)"(Adhesion (cross hatch)) |
- |
0 |
|
- |
| "Clause 7.1 Table 3(iv)"(Pencil hardness, Min) |
- |
0 |
|
- |
| "Clause 7.1 Table 3(v)"(Gloss) |
- |
0 |
|
- |
| "Clause 7.1 Table 3(vi)"(Weatherometer test (for 4 000 h)) |
- |
0 |
|
- |
| "Clause 7.1 Table 3(vii)"(Chemical resistance) |
- |
0 |
|
- |
| Clause 6.1(Normal dimensions) |
- |
0 |
|
- |
| "Clause 7.1 Table 2(i)"(Density of core, g/cm) |
- |
0 |
|
- |
| "Clause 7.1 Table 2(ii)"(Tensile strength,) |
- |
0 |
|
- |
| "Clause 7.1 Table 2(iii)"(Yield strength) |
- |
0 |
|
- |
| "Clause 7.1 Table 2(iv)"(Elongation) |
- |
0 |
|
- |
| "Clause 7.1 Table 2(v)"(Peel strength, N/10 mm width, Min) |
- |
0 |
|
- |
| "Clause 7.1 Table 3(ii)"(Coating thickness) |
- |
0 |
|
- |
| "Clause 7.1 Table 3(iii)"(Adhesion (cross hatch)) |
- |
0 |
|
- |
| "Clause 7.1 Table 3(iv)"(Pencil hardness, Min) |
- |
0 |
|
- |
| "Clause 7.1 Table 3(v)"(Gloss) |
- |
0 |
|
- |
| "Clause 7.1 Table 3(vi)"(Weatherometer test (for 4 000 h)) |
- |
0 |
|
0 |
| "Clause 7.1 Table 3(vii)"(Chemical resistance) |
- |
0 |
|
- |
| Cl-6.2(Thickness) |
- |
0 |
|
- |
| Cl-6.3(Tolerances) |
- |
0 |
|
- |
| Cl-5.3(Adhesive) |
- |
0 |
|
- |
| Cl-6(Edge straightness, Max) |
- |
0 |
|
- |
| Cl-6(Squareness, Max) |
- |
0 |
|
- |
|
19 Nov, 2027 |
-
- |
| 11 |
ALPHA TEST HOUSE PVT LTD, BAHADURGARH
| 8185306
| IS 15778 (2007) |
Chlorinated polyvinyl chloride (Cpvc) pipes for potable hot and cold water distribution supplies - Specification |
ALL |
130000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 5
Table 1(Classification of pipes) |
- |
1500 |
|
- |
| 6.2.1
Annex B(Chloride Content of Resin) |
- |
1500 |
|
- |
| 6.3(Compound Properties) |
- |
1500 |
|
- |
| 6.3.1
Annex B(Chloride content) |
- |
1500 |
|
- |
| 6.3.2
Annex C(Verification of the Malfunction Temperature, Tmal:
) |
- |
1500 |
|
- |
| 6.3.2
IS 13360 (Part 3/See 1)(Density) |
- |
1500 |
|
- |
| 7.1
IS 12235 (Part 1)
Table 2(Dimension of Pipes:
Mean outside Diameter) |
- |
1500 |
|
- |
| 7.1,7.1.1
IS 12235 (Part 1)
Table 2(Outside Diameter at any point) |
- |
1500 |
|
- |
| 7.1.2
IS 12235 (Part 1)
Table 2(Wall Thickness ) |
- |
1500 |
|
- |
| 7.1.3 (Effective length) |
- |
1500 |
|
- |
| 8(Pipe Ends) |
- |
1500 |
|
- |
| 9(PHYSICAL AND CHEMICAL CHARACTERISTICS) |
- |
1500 |
|
- |
| 9.1(Visual Appearance) |
- |
1500 |
|
- |
| 9.1(Visual Appearance) |
- |
1500 |
|
- |
| 9.2
IS 12235 (Part 3)(Opacity) |
- |
1500 |
|
- |
| Cl. 9.3,IS 4985 Cl. 10.3(Lead (first extraction)) |
- |
1500 |
|
- |
| Cl. 9.3,IS 4985 Cl. 10.3(Lead (third extraction)) |
- |
1500 |
|
- |
| Cl. 9.3,IS 4985 Cl. 10.3(Dialkyl tin C4 and higher homologues measured as tin (third extraction)) |
- |
1500 |
|
- |
| Cl. 9.3,IS 4985 Cl. 10.3(Cadmium (for all three extracts) ) |
- |
1500 |
|
- |
| Cl. 9.3,IS 4985 Cl. 10.3(Mercury (for all three extracts) ) |
- |
1500 |
|
- |
| Cl. 9.3,IS 4985 Cl. 10.3(Other toxic substances such as 'di-n-octyl-tin- s-s bis iso-octyl mercapto acetate' and 'butyl stearate' (third extraction) ) |
- |
1500 |
|
- |
| Cl. 9.3,IS 4985 Cl. 10.3(Other toxic substances including di-n-octyl-tin- s-s bis iso-octyl mercapto acetate' and 'butyl stearate') |
- |
1500 |
|
- |
| 9.4
IS 12235(Part 5/Sec 1 and Sec 2)(Reversion Test :
When tested by the method prescribed in IS 12235(Part 5/Sec 1 and Sec 2), a length of pipe 200 + 20 mm long shall not alter in length by more than 5 percent.) |
- |
1500 |
|
- |
| 9.5
IS 12235(Part 2)(Vicat Softening Temperature:
When tested by the method prescribed in IS 12235(Part 2), the Vicat softening temperature of the specimen
shall not be less than 110°C.) |
- |
1500 |
|
- |
| 9.6
IS 12235(Part 14)(Density) |
- |
1500 |
|
- |
| 10(Mechanical Properties) |
- |
1500 |
|
- |
| 10.1
Table 3
IS 12235
(Part 8/Sec 1)(Hydrostatic Characteristics) |
- |
1500 |
|
- |
| 10.1
Table 3
IS 12235
(Part 8/Sec 1)(Hydrostatic Characteristics) |
- |
1500 |
|
- |
| 10.1
Table 3
IS 12235
(Part 8/Sec 1)(Hydrostatic Characteristics) |
- |
1500 |
|
- |
| 10.2
Table 3
IS 12235
(Part 8/Sec 1)(Thermal Stability by Hydrostatic Pressure Testing) |
- |
1500 |
|
- |
| 10.3
IS 4985
Table 4(Resistance to External Blow at O°C:
When tested by the method prescribed in IS 4985, with classified striker mass and drop height as given in Table 4, the pipe shall have a true impact rate of not more than 10 percent.) |
- |
1500 |
|
- |
| 10.4
IS 12235(Part 19)(Flattening Test) |
- |
1500 |
|
- |
| 10.5
IS 12235(Part 13)(Tensile Strength :
When tested by the method prescribed in IS 12235(Part 13), the tensile strength at yield shall not be less than 50 MPaat 27±2°C.
) |
- |
1500 |
|
- |
| 5
Table 1(Classification of pipes) |
- |
1500 |
|
- |
| 6.2.1
Annex B(Chloride Content of Resin) |
- |
1500 |
|
- |
| 6.3(Compound Properties) |
- |
1500 |
|
- |
| 6.3.1
Annex B(Chloride content) |
- |
1500 |
|
- |
| 6.3.2
Annex C(Verification of the Malfunction Temperature, Tmal:
) |
- |
1500 |
|
- |
| 6.3.2
IS 13360 (Part 3/See 1)(Density) |
- |
1500 |
|
- |
| 7.1
IS 12235 (Part 1)
Table 2(Dimension of Pipes:
Mean outside Diameter) |
- |
1500 |
|
- |
| 7.1,7.1.1 IS 12235 (Part 1)Table 2(Outside Diameter at any point (Minimum)) |
- |
1500 |
|
- |
| 7.1.2 IS 12235 (Part 1)Table 2(Wall Thickness (Minimum)) |
- |
1500 |
|
- |
| 7.1.3 (Effective length) |
- |
1500 |
|
- |
| 8.0(Pipe Ends) |
- |
1500 |
|
- |
| 9.0(PHYSICAL AND 1CHARACTERISTICS) |
- |
1500 |
|
- |
| 9.1(Visual Appearance) |
- |
1500 |
|
- |
| 9.1(Visual Appearance) |
- |
1500 |
|
- |
| 9.2
IS 12235 (Part 3)(Opacity) |
- |
1500 |
|
- |
| Cl. 9.3,IS 4985 Cl. 10.3(Lead (first extraction)) |
- |
1500 |
|
- |
| Cl. 9.3,IS 4985 Cl. 10.3(Lead (third extraction)) |
- |
1500 |
|
- |
| Cl. 9.3,IS 4985 Cl. 10.3(Dialkyl tin C4 and higher homologues measured as tin (third extraction)) |
- |
1500 |
|
- |
| Cl. 9.3,IS 4985 Cl. 10.3(Cadmium (for all three extracts) ) |
- |
1500 |
|
- |
| Cl. 9.3,IS 4985 Cl. 10.3(Mercury (for all three extracts) ) |
- |
1500 |
|
- |
| Cl. 9.3,IS 4985 Cl. 10.3(Other toxic substances such as 'di-n-octyl-tin- s-s bis iso-octyl mercapto acetate' and 'butyl stearate' (third extraction) ) |
- |
1500 |
|
- |
| Cl. 9.3,IS 4985 Cl. 10.3(Other toxic substances including di-n-octyl-tin- s-s bis iso-octyl mercapto acetate' and 'butyl stearate') |
- |
1500 |
|
- |
| 9.4
IS 12235(Part 5/Sec 1 and Sec 2)(Reversion Test :
When tested by the method prescribed in IS 12235(Part 5/Sec 1 and Sec 2), a length of pipe 200 + 20 mm long shall not alter in length by more than 5 percent.) |
- |
1500 |
|
- |
| 9.5
IS 12235(Part 2)(Vicat Softening Temperature:
When tested by the method prescribed in IS 12235(Part 2), the Vicat softening temperature of the specimen
shall not be less than 110°C.) |
- |
1500 |
|
- |
| 9.6
IS 12235(Part 14)(Density) |
- |
1500 |
|
- |
| 10.0(Mechanical Properties) |
- |
1500 |
|
- |
| 10.1
Table 3
IS 12235
(Part 8/Sec 1)(Hydrostatic Characteristics) |
- |
1500 |
|
- |
| 10.1
Table 3
IS 12235
(Part 8/Sec 1)(Hydrostatic Characteristics) |
- |
1500 |
|
- |
| 10.1
Table 3
IS 12235
(Part 8/Sec 1)(Hydrostatic Characteristics) |
- |
1500 |
|
- |
| 10.2
Table 3
IS 12235
(Part 8/Sec 1)(Thermal Stability by Hydrostatic Pressure Testing) |
- |
1500 |
|
- |
| 10.3
IS 4985
Table 4(Resistance to External Blow at O°C:
When tested by the method prescribed in IS 4985, with classified striker mass and drop height as given in Table 4, the pipe shall have a true impact rate of not more than 10 percent.) |
- |
1500 |
|
- |
| 10.4
IS 12235(Part 19)(Flattening Test) |
- |
1500 |
|
- |
| 10.5
IS 12235(Part 13)(Tensile Strength :
When tested by the method prescribed in IS 12235(Part 13), the tensile strength at yield shall not be less than 50 MPaat 27±2°C.
) |
- |
1500 |
|
- |
| 7.1.2(Wall Thickness (Maximum)) |
- |
1500 |
|
- |
| 7.1.1(Outside Diameter at any point (Maximum)) |
- |
1500 |
|
- |
| 6.3(K value Test) |
- |
1500 |
|
- |
| 6.3.3(Density) |
- |
1500 |
|
- |
| 5
Table 1(Classification of pipes) |
- |
1500 |
|
- |
| 6.2.1
Annex B(Chloride Content of Resin) |
- |
1500 |
|
- |
| 6.3(Compound Properties) |
- |
1500 |
|
- |
| 6.3.1
Annex B(Chloride content) |
- |
1500 |
|
- |
| 6.3.2
Annex C(Verification of the Malfunction Temperature, Tmal:
) |
- |
1500 |
|
- |
| 6.3.2
IS 13360 (Part 3/See 1)(Density) |
- |
1500 |
|
- |
| 7.1
IS 12235 (Part 1)
Table 2(Dimension of Pipes:
Mean outside Diameter) |
- |
1500 |
|
- |
| 7.1,7.1.1
IS 12235 (Part 1)
Table 2(Outside Diameter at any point) |
- |
1500 |
|
- |
| 7.1.2
IS 12235 (Part 1)
Table 2(Wall Thickness ) |
- |
1500 |
|
- |
| 7.1.3 (Effective length) |
- |
1500 |
|
- |
| 8(Pipe Ends) |
- |
1500 |
|
- |
| 9(PHYSICAL AND CHEMICAL CHARACTERISTICS) |
- |
1500 |
|
- |
| 9.1(Visual Appearance) |
- |
1500 |
|
- |
| 9.1(Visual Appearance) |
- |
1500 |
|
- |
| 9.2
IS 12235 (Part 3)(Opacity) |
- |
1500 |
|
- |
| Cl. 9.3,IS 4985 Cl. 10.3(Lead (first extraction)) |
- |
1500 |
|
- |
| Cl. 9.3,IS 4985 Cl. 10.3(Lead (third extraction)) |
- |
1500 |
|
- |
| Cl. 9.3,IS 4985 Cl. 10.3(Dialkyl tin C4 and higher homologues measured as tin (third extraction)) |
- |
1500 |
|
- |
| Cl. 9.3,IS 4985 Cl. 10.3(Cadmium (for all three extracts) ) |
- |
1500 |
|
- |
| Cl. 9.3,IS 4985 Cl. 10.3(Mercury (for all three extracts) ) |
- |
1500 |
|
- |
| Cl. 9.3,IS 4985 Cl. 10.3(Other toxic substances such as 'di-n-octyl-tin- s-s bis iso-octyl mercapto acetate' and 'butyl stearate' (third extraction) ) |
- |
1500 |
|
- |
| Cl. 9.3,IS 4985 Cl. 10.3(Other toxic substances including di-n-octyl-tin- s-s bis iso-octyl mercapto acetate' and 'butyl stearate') |
- |
1500 |
|
- |
| 9.4
IS 12235(Part 5/Sec 1 and Sec 2)(Reversion Test :
When tested by the method prescribed in IS 12235(Part 5/Sec 1 and Sec 2), a length of pipe 200 + 20 mm long shall not alter in length by more than 5 percent.) |
- |
1500 |
|
- |
| 9.5
IS 12235(Part 2)(Vicat Softening Temperature:
When tested by the method prescribed in IS 12235(Part 2), the Vicat softening temperature of the specimen
shall not be less than 110°C.) |
- |
1500 |
|
- |
| 9.6
IS 12235(Part 14)(Density) |
- |
1500 |
|
- |
| 10(Mechanical Properties) |
- |
1500 |
|
- |
| 10.1
Table 3
IS 12235
(Part 8/Sec 1)(Hydrostatic Characteristics) |
- |
1500 |
|
- |
| 10.1
Table 3
IS 12235
(Part 8/Sec 1)(Hydrostatic Characteristics) |
- |
1500 |
|
- |
| 10.1
Table 3
IS 12235
(Part 8/Sec 1)(Hydrostatic Characteristics) |
- |
1500 |
|
- |
| 10.2
Table 3
IS 12235
(Part 8/Sec 1)(Thermal Stability by Hydrostatic Pressure Testing) |
- |
1500 |
|
- |
| 10.3
IS 4985
Table 4(Resistance to External Blow at O°C:
When tested by the method prescribed in IS 4985, with classified striker mass and drop height as given in Table 4, the pipe shall have a true impact rate of not more than 10 percent.) |
- |
1500 |
|
- |
| 10.4
IS 12235(Part 19)(Flattening Test) |
- |
1500 |
|
- |
| 10.5
IS 12235(Part 13)(Tensile Strength :
When tested by the method prescribed in IS 12235(Part 13), the tensile strength at yield shall not be less than 50 MPaat 27±2°C.
) |
- |
1500 |
|
- |
| 7.1,7.1.1 IS 12235 (Part 1)Table 2(Outside Diameter at any point (Minimum)) |
- |
1500 |
|
- |
| 7.1.2 IS 12235 (Part 1)Table 2(Wall Thickness (Minimum)) |
- |
1500 |
|
- |
| 7.1.2(Wall Thickness (Maximum)) |
- |
1500 |
|
- |
| 7.1.1(Outside Diameter at any point (Maximum)) |
- |
1500 |
|
- |
| 6.3(K value Test) |
- |
1500 |
|
- |
| 6.3.3(Density) |
- |
1500 |
|
- |
|
08 May, 2028 |
-
Included w.e.f. 21.08.2025 |
| 12 |
BIS, Western Regional Laboratory (WRL)
| None
| IS 14543 (2016) |
Packaged drinking water (Other Than Packaged Natural Mineral Water) - Specification (Second Revision) |
- |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 5.3 Table-1vi (pH) |
- |
|
|
|
|
- |
-
- |
| 13 |
ALPHA TEST HOUSE SERVICES LLP (Unit-1), MOHALI
| 9184906
| IS/IEC 61730 : PART 2 (2023) |
Photovoltaic (PV) Module - Safety Qualification Part 2 Requirements for Testing (Second Revision) |
All |
830000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 10.2(Visual inspection MST 01) |
- |
830000 |
|
- |
| 10.3(Performance at STC MST 02) |
- |
830000 |
|
- |
| 10.4(Maximum power determination MST 03) |
- |
830000 |
|
- |
| 10.5(Insulation thickness test MST 04) |
- |
830000 |
|
- |
| 10.6(Durability of markings MST 05) |
- |
830000 |
|
- |
| 10.7(Sharp edge test MST 06) |
- |
830000 |
|
- |
| 10.8(Bypass diode functionality test MST 07) |
- |
830000 |
|
- |
| 10.9(Accessibility test MST 11) |
- |
830000 |
|
- |
| 10.1(Cut susceptibility test MST 12) |
- |
830000 |
|
- |
| 10.11(Continuity test of equipotential bonding MST 13) |
- |
830000 |
|
- |
| 10.12(Impulse voltage test MST 14) |
- |
830000 |
|
- |
| 10.13(Insulation test MST 16) |
- |
830000 |
|
- |
| 10.14(Wet leakage current test MST 17) |
- |
830000 |
|
- |
| 10.16(Hot-spot endurance test MST 22) |
- |
830000 |
|
- |
| 10.17(Fire test MST 23) |
- |
830000 |
|
- |
| 10.18(Ignitability test MST 24) |
- |
830000 |
|
- |
| 10.19(Bypass diode thermal test MST 25) |
- |
830000 |
|
- |
| 10.20(Reverse current overload test MST 26) |
- |
830000 |
|
- |
| 10.21(Module breakage test MST 32) |
- |
830000 |
|
- |
| 10.22(Screw connections test MST 33) |
- |
830000 |
|
- |
| 10.23(Static mechanical load test MST 34) |
- |
830000 |
|
- |
| 10.24(Peel test MST 35) |
- |
830000 |
|
- |
| 10.25(Lap shear strength test MST 36) |
- |
830000 |
|
- |
| 10.26(Materials creep test MST 37) |
- |
830000 |
|
- |
| 10.27(Robustness of terminations test MST 42) |
- |
830000 |
|
- |
| 10.28(Thermal cycling test MST 51) |
- |
830000 |
|
- |
| 10.29(Humidity freeze test MST 52) |
- |
830000 |
|
- |
| 10.30(Damp heat test MST 53) |
- |
830000 |
|
- |
| 10.31(UV test MST 54) |
- |
830000 |
|
- |
| 10.32(Cold conditioning test MST 55) |
- |
830000 |
|
- |
| 10.33(Dry heat conditioning test MST 56) |
- |
830000 |
|
- |
| 10.34(Evaluation of insulation coordination MST 57) |
- |
830000 |
|
- |
|
25 Apr, 2028 |
-
Included w.e.f. 21.08.2025 |
| 14 |
Central Institute of Petrochemicals Engineering & Technology (CIPET), Murthal
| 9121934
| IS 14968 (2015) |
Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sacks for packing 50 Kg/25 kg sugar – Specification (first revision) |
- |
21930 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 3(TYPES) |
- |
500 |
|
Nil |
| 4.1(Raw Material) |
- |
2000 |
|
Nil |
| 4.2(Tapes – Width
IS 6192 and IS 11197) |
- |
500 |
|
Nil |
| 4.2(Tapes – Linear Density
) |
- |
500 |
|
Nil |
| 4.2(Construction) |
- |
500 |
|
Nil |
| 4.3(Sacks) |
- |
500 |
|
Nil |
| 4.3.1(Bottom Seam) |
- |
500 |
|
Nil |
| 4.3.1(The two rows of stitches shall be separated from each other) |
- |
0 |
|
Test Charges Included in Bottom Seam Test |
| 4.3.1( The outer stitch) |
- |
0 |
|
Test Charges Included in Bottom Seam Test |
| 4.3.1( The stitching shall be done with double fold over seam to a depth ) |
- |
0 |
|
Test Charges Included in Bottom Seam Test |
| 4.3.1(Stitches pass through a minimum of six layers of the fabric. ) |
- |
0 |
|
Test Charges Included in Bottom Seam Test |
| 4.3.1(stitches/dm) |
- |
0 |
|
Test Charges Included in Bottom Seam Test |
| 4.3.2(Mouth) |
- |
0 |
|
Test Charges Included in Bottom Seam Test |
| 4.4(Liner
IS 10146 or IS 10910.) |
- |
500 |
|
Nil |
| 4.4(Mass of the loose liner ) |
- |
500 |
|
Nil |
| 4.4(Width of the loose liner) |
- |
500 |
|
Nil |
| 4.4(Length of the line) |
- |
500 |
|
Nil |
| 4.4(Bottom seam of the loose liner) |
- |
500 |
|
Nil |
| 4.4.1(Liner) |
- |
500 |
|
Nil |
| 4.5 and Table 1 i(Capacity) |
- |
500 |
|
Nil |
| 5.2 and Table 1 ii a(Dimensions Inside Length) |
- |
500 |
|
Nil |
| 5.2 and Table 1 ii b(Dimensions Inside Width) |
- |
0 |
|
Test Charges Included in Dimensions Inside Length Test |
| 5.2 and Table 1 iii(Ends per dm ) |
- |
500 |
|
Nil |
| 5.2 and Table 1 iv(Picks per dm ) |
- |
0 |
|
Test Charges Included in Ends per dm Test |
| 5.1 and Table 1 v a(Mass of unlaminated sack
IS 1964) |
- |
500 |
|
Nil |
| 5.1 and Table 1 v b(Mass of unlaminated sack with liner
) |
- |
500 |
|
Nil |
| 5.2 and Table 1 vi a(Average breaking strength of fabric Lengthwise
IS 1969 (Part 1)) |
- |
1100 |
|
Nil |
| 5.2 and Table 1 vi b(Average breaking strength of fabric Widthwise
IS 1969 (Part 1)) |
- |
1100 |
|
Nil |
| 5.2 and Table 1 vi(Breaking strength of bottom seam
IS 9030
) |
- |
1100 |
|
Nil |
| 5.2 and Table 1 viii a(Elongation at break of fabric Lengthwise
IS 1969 (Part 1)) |
- |
0 |
|
Test Charges Included in Breaking Strength Test |
| 5.2 and Table 1 viii b(Elongation at break of fabric Widthwise
IS 1969 (Part 1)) |
- |
0 |
|
Test Charges Included in Breaking Strength Test |
| 5.2 and Table 1 ix(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering ) |
- |
12380 |
|
U.V Light Exposure Charges RS.10180 |
| 5.2 and Table 1 x(Ash content ) |
- |
1200 |
|
Nil |
|
09 Aug, 2028 |
-
- |
| 15 |
Central Institute of Petrochemicals Engineering & Technology (CIPET), Murthal
| 9121934
| IS 15801 (2008) |
Polypropylene - Random copolymer pipes for hot and cold water supplies - Specification |
- |
122250 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl 4( Designation) |
- |
500 |
|
Nil |
| Cl 7(Dimensions Of Pipes) |
- |
500 |
|
Nil |
| Cl 9.1(Hydraulic Characteristics) |
- |
18400 |
|
Acceptance Test (1 h. / 20˚ C)
Acceptance Test (22 h. / 95˚ C)
Type test ( 165 h. / 95˚ C)
Type test ( 1000 h. / 95˚ C)
Type test ( 165 h. / 95˚ C) |
| Cl 9.3(Reversion Test ) |
- |
1200 |
|
Testing Charges- 700
Specimen Charges-500 |
| Cl 9.4 & Annex B(Impact Strength) |
- |
1600 |
|
Testing Charges- 1100
Specimen Charges-500 |
| Cl 9.5(Density) |
- |
700 |
|
Nil |
| Cl 9.6(Melt Flow Rate) |
- |
1100 |
|
Nil |
| Cl 9.7(Carbon Black Content & Dispersion) |
- |
1625 |
|
Carbon Black content Rs 925
Carbon Black dispersion Rs 700 |
| Cl 9.8(Thermal Stability By Hydrostatic Pressure Testing) |
- |
83825 |
|
Thermal Stability by Hydrostatic Pressure (8760 h./110 °C)* |
| Cl 9.9(Opacity) |
- |
700 |
|
Nil |
|
09 Aug, 2028 |
-
- |
| 16 |
Central Institute of Petrochemicals Engineering & Technology (CIPET), Murthal
| 9121934
| IS 12701 (1996) |
Rotational moulded polyethylene water storage tanks - specification (First Revision) |
- |
22250 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4.2.3(Carbon Black Content ) |
- |
900 |
|
Nil |
| 4.2.3(Carbon Dispersion Test) |
- |
650 |
|
Nil |
| 5(Types and Features ) |
- |
500 |
|
Nil |
| 5.1 Table 1(Dimensioas of Cylinderical Vertical Tank) |
- |
500 |
|
Nil |
| 5.2 Table 2(Dimensions of Rectangular Loft Tanks) |
- |
500 |
|
Nil |
| 5.3(Types and Features ) |
- |
0 |
|
Test charges included in Types and Features |
| 5.6(Types and Features ) |
- |
0 |
|
Test charges included in Types and Features |
| 6.1(Finish) |
- |
500 |
|
Nil |
| 7.1.1(Resistance to Deformation) |
- |
700 |
|
Nil |
| 7.1.2(Resistance to Deformation) |
- |
1100 |
|
Nil |
| 7.2(Resistance to Impact) |
- |
1000 |
|
Nil |
| 7.3(Test for Top Load Resistance) |
- |
900 |
|
Nil |
| 7.4(Tensile Strength) |
- |
1800 |
|
Testing Charges- 1300
Specimen Charges-500 |
| 7.5(Flexural Modulus) |
- |
1600 |
|
Testing Charges- 1100
Specimen Charges-500 |
| 7.6(overall Migration) |
- |
2200 |
|
Testing Charges- 1700
Specimen Charges-500 |
| 9.2.1(Man-Hole and Hand-Hole Lids) |
- |
500 |
|
Lid Lock up & Lid Clearance Dimension |
| 9.2(Man-Hole and Hand-Hole Lids) |
- |
0 |
|
Test Charges included in Man-Hole and Hand-Hole Lids |
| 9.1(Man-Hole and Hand-Hole Lids) |
- |
0 |
|
Test charges included in above CBC & CBD Test. |
| 9.1(Lid Thickness) |
- |
500 |
|
Nil |
| 5.4(Wall Thickness above effective height) |
- |
500 |
|
Nil |
| 5.2 Table 2 (7)(Minimum Wall Thickness) |
- |
500 |
|
Nil |
| 5.1 Table 1 (7)(Minimum Weight of Tank (Without Lid)) |
- |
500 |
|
Nil |
| 4.2.1(Density) |
- |
1325 |
|
Testing Charges- 700
Specimen Charges-625 |
| 4.2.2(MFI) |
- |
1000 |
|
Nil |
| 7.6(overall Migration) |
- |
0 |
|
Test charges included in overall Migration test (above) |
|
09 Aug, 2028 |
-
- |
| 17 |
Central Institute of Petrochemicals Engineering & Technology (CIPET), Murthal
| 9121934
| IS 10889 (2004) |
High density polyethylene films (First Revision) |
- |
12900 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4.0(Grades) |
- |
500 |
|
Nil |
| 5.1(Materials) |
- |
2000 |
|
Nil |
| 5.2(Black Compound) |
- |
1550 |
|
CBC 900
CBD 650 |
| 6.1.1(Appearance) |
- |
500 |
|
Nil |
| 6.1.2(Film Form) |
- |
0 |
|
Test Charges Included in Appearance |
| 6.1.3(Odour ) |
- |
0 |
|
Test Charges Included in Appearance |
| 6.1.4(Density) |
- |
700 |
|
Nil |
| 6.1.5(Melt Flow Rate) |
- |
1100 |
|
Nil |
| 6.1.6(Black Film) |
- |
1625 |
|
CBC 925
CBD 700 |
| 6.2.1, Table 1(Nominal Thickness) |
- |
500 |
|
Nil |
| 6.2.1, Table 1(Tolerance, Percent Grade 1 and 2) |
- |
0 |
|
Test Charges Included in Nominal Thickness |
| 6.2.2, Table 2(Nominal Width) |
- |
500 |
|
Nil |
| 6.2.2, Table 2(Tolerance, Percent Grade 1 and 2) |
- |
0 |
|
Test Charges Included in Nominal Thickness |
| 6.3, Table 3(Yield Tolerance) |
- |
600 |
|
Nil |
| 6.3, Table 3(Tolerance, Percent Grade 1 and 2) |
- |
0 |
|
Test Charges Included in Yield Tolerance |
| 6.4.1(Tensile Strength at Break) |
- |
2600 |
|
MD 1300
TD 1300 |
| 6.4.1, Table 4(Direction) |
- |
0 |
|
Test Charges Included in Tensile Strength at Break |
| 6.4.2(Elongation at Break) |
- |
0 |
|
Test Charges Included in Tensile Strength at Break |
| 6.4.2, Table 5(Direction) |
- |
0 |
|
Test Charges Included in Tensile Strength at Break |
| 6.4.2, Table 5(Elongation at Break, Percent Grade 1 and 2) |
- |
0 |
|
Test Charges Included in Tensile Strength at Break |
| 6.4.3(Impact Resistance (Falling Dart)) |
- |
800 |
|
Nil |
| 6.4.3, Table 6(Average Thickness of Film) |
- |
500 |
|
Nil |
|
09 Aug, 2028 |
-
- |
| 18 |
Central Institute of Petrochemicals Engineering & Technology (CIPET), Murthal
| 9121934
| IS 11652 (2017) |
Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sacks for packaging of 50 kg cement – Specification (third revision) |
- |
27680 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4.2
(width of tape, 2.5 mm ± 0.1 mm) |
- |
500 |
|
Nil |
| Fig. 1- Table 1- Sr. no. ii
(Ends per dm - Annex B 40 ± 2 ) |
- |
500 |
|
Nil |
| Fig. 1- Table 1-Sr. no. iii
(Picks per dm-Annex B 40 ± 2 ) |
- |
0 |
|
Test Charges Included in Ends Test |
| Fig. 1- Table 1- Sr. no. i
(Dimensions, mm (see Note )- Annex B
c) Width of gusset (e) 76 ± 10 mm
) |
- |
500 |
|
Nil |
| Fig. 1- Table 1- Sr. no. i
(Dimensions, mm (see Note ) -Annex B
d) Width of valve (v) 100, + 10/-5 mm
) |
- |
0 |
|
Test Charges Included in Dimension Test |
| Fig. 1- Table 1-Sr. no. i
(Dimensions, mm (see Note )- Annex B
b) Width of sack (w) 480 ± 10 mm
) |
- |
0 |
|
Test Charges Included in Dimension Test |
| Fig. 1, Table 1
(i) Dimensions, mm (see Note ) -Annex B
a) Length of sack, inside (l), 710 ± 10 mm
) |
- |
0 |
|
Test Charges Included in Dimension Test |
| 4.5(and the remaining overhang shall not be more than 5 mm after trimming.) |
- |
0 |
|
Test Charges Included in Dimension Test |
| 4.1(Raw Material
) |
- |
2000 |
|
Nil |
| 4.2
(Linear Density, 900 denier) |
- |
500 |
|
Nil |
| 4.2
(The woven fabric shall be
of mesh, 10 × 10 per inch) |
- |
500 |
|
Nil |
| 4.2
(The woven fabric shall be
of weight, 79 g/m2 ) |
- |
500 |
|
Nil |
| 4.3(Sacks) |
- |
500 |
|
Nil |
| 4.4(Seam
) |
- |
500 |
|
Nil |
| 4.4(Seam The two rows of stitches shall be separated from each other by minimum 5 mm and ) |
- |
0 |
|
Test Charges Included in Seam Test |
| 4.4(Seam The outer stitch shall be minimum 8 mm from the outer edge of the sacks. ) |
- |
0 |
|
Test Charges Included in Seam Test |
| 4.4(Seam The stitching shall be done with double fold over seam to) |
- |
0 |
|
Test Charges Included in Seam Test |
| 4.4(to a depth of minimum 25 mm, so that so that) |
- |
0 |
|
Test Charges Included in Seam Test |
| 4.4(that the stitches pass through a minimum of six layers of the fabric.) |
- |
0 |
|
Test Charges Included in Seam Test |
| 4.4(The number of stitches/dm shall be 14 ± 2.) |
- |
0 |
|
Test Charges Included in Seam Test |
| 4.6(Capacity The sack shall have the nominal filling capacity of 50 kg) |
- |
500 |
|
Nil |
| 4.7(Valve for Filling of Sacks) |
- |
500 |
|
Nil |
| 5/5.1-Table 1-Sr. no. iv(Requirements, Mass of Sack- IS 1964
a) gusseted type 71 + 6%) |
- |
0 |
|
Nil |
| 5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): -1969 (Part 1) a) Lengthwise , 900 (91.8) ) |
- |
1100 |
|
Nil |
| 5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): - 1969 (Part 1) b) Widthwise , 900 (91.8) ) |
- |
1100 |
|
Nil |
| 5/5.3-Table 1-Sr. no.vi(Breaking strength of top seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8)) |
- |
1100 |
|
Nil |
| 5/5.3-Table 1-Sr. no.vi(Breaking strength of bottom seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8)) |
- |
1100 |
|
Nil |
| 5/5.3-Table 1-Sr. no.vii(Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) a) Lengthwise 15 to 25) |
- |
0 |
|
Charges included in Breaking Strength |
| 5/5.3-Table 1-Sr. no.vii(Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) b) Widthwise 15 to 25) |
- |
0 |
|
Charges included in Breaking Strength |
| 5/5.4-Table 1-Sr. no.viii(Drop impact strength - Annex C No failure) |
- |
1100 |
|
Nil |
| 5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D a) For UV stabilized sacks 2.2
) |
- |
1200 |
|
Nil |
| 5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D b) For non-UV stabilized sacks 6
) |
- |
1200 |
|
Nil |
| 5/5.6 (UV Resistance, ) |
- |
10180 |
|
Nil |
| 5/5.6 (UV Resistance, The UV stabilized woven fabric shall have at least 50 percent retention of the original breaking strength when tested after the same has been exposed
to a) UV Radiation -Annex F ) |
- |
1100 |
|
Nil |
| 5/5.6 (UV Resistance, The UV stabilized woven fabric shall have at least 50 percent retention of the original breaking strength when tested after the same has been exposed
to b) Accelerated Weathering - Annex F ) |
- |
1100 |
|
Nil |
| 4.5(Lamination ) |
- |
500 |
|
Nil |
|
09 Aug, 2028 |
-
- |
| 19 |
ALPHA TEST HOUSE SERVICES LLP (Unit-1), MOHALI
| 9184906
| IS/IEC 61730 : PART 1 (2023) |
Photovoltaic (PV) Module Safety Qualification Part 1 Requirements for Construction (Second Revision) |
all |
250000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 5(Classification, applications and intended use) |
- |
250000 |
|
- |
| 6.2(Marking and documentation) |
- |
250000 |
|
- |
| 6.3.2(Internal wiring) |
- |
250000 |
|
- |
| 6.3.3(External wiring and cables) |
- |
250000 |
|
- |
| 6.3.4(Module overcurrent protection rating) |
- |
250000 |
|
- |
| 6.3.5(Connectors) |
- |
250000 |
|
- |
| 6.3.6(Junction boxes) |
- |
250000 |
|
- |
| 6.3.7(Frontsheets and backsheets) |
- |
250000 |
|
- |
| 6.3.8(Insulation barriers) |
- |
250000 |
|
- |
| 6.3.9(Electrical connections) |
- |
250000 |
|
- |
| 6.3.10(Encapsulants) |
- |
250000 |
|
- |
| 6.3.11(Bypass diodes) |
- |
250000 |
|
- |
| 6.4(Mechanical and electromechanical connections) |
- |
250000 |
|
- |
| 6.4.2(Screw connections) |
- |
250000 |
|
- |
| 6.4.3(Rivets) |
- |
250000 |
|
- |
| 6.4.4(Thread-cutting screws) |
- |
250000 |
|
- |
| 6.4.5(Form/press/tight fit) |
- |
250000 |
|
- |
| 6.4.6(Connections by adhesives) |
- |
250000 |
|
- |
| 6.4.7(Other connections) |
- |
250000 |
|
- |
| 6.5.2(Polymeric materials) |
- |
250000 |
|
- |
| 6.5.2.3(Flammability) |
- |
250000 |
|
- |
| 6.5.3.2(Current-carrying parts) |
- |
250000 |
|
- |
| 6.5.4(Adhesives) |
- |
250000 |
|
- |
| 6.6.2(Protection against accessibility to hazardous live parts) |
- |
250000 |
|
- |
| 6.6.3(Insulation coordination) |
- |
250000 |
|
- |
| 6.6.3.2.1(Pollution degree) |
- |
250000 |
|
- |
| 6.6.3.3(Creepage distance) |
- |
250000 |
|
- |
| 6.6.3.4(Clearance) |
- |
250000 |
|
- |
| 6.6.4(Distance through functional and relied upon insulation) |
- |
250000 |
|
- |
| 6.6.4.3(Cemented joints) |
- |
250000 |
|
- |
| 6.6.4.4(Distance through functional insulation) |
- |
250000 |
|
- |
|
25 Apr, 2028 |
-
Included w.e.f. 21.08.2025 |
| 20 |
Central Institute of Petrochemicals Engineering & Technology (CIPET), Murthal
| 9121934
| IS 12818 (2010) |
Unplasticized polyvinyl chloride (Pvc - U) screen and casing pipes for bore/tubewells - Specification (Second Revision) |
- |
16350 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 9.6(Vicat Softening Temperature
IS 12235 (Part 2).) |
- |
1100 |
|
Nil |
| 9.5(Tensile Strength
IS 12235(Part 13)) |
- |
1800 |
|
Testing Charges- 1300
Specimen Charges-500 |
| 9.4 and Table 14(Resistance to External Blows at 0 ?C
IS 12235 (Part 9)) |
- |
1500 |
|
Testing Charges- 1000
Specimen Charges-500 |
| 9.3(Density
IS 12235 (Part 14)) |
- |
700 |
|
Nil |
| 9.2(Internal Diameter) |
- |
500 |
|
Nil |
| 9.1( Visual Appearance) |
- |
500 |
|
Nil |
| 8.4.1 and Table 13
Fig 3B & 4B(Dimensions of sealing elements) |
- |
500 |
|
Nil |
| 8.4(Sealing rings - Hardness) |
- |
500 |
|
Nil |
| 7.4 Table 8 & 9
Fig 1(Effective length, l2) |
- |
500 |
|
Nil |
| 7.3.2(Rib height) |
- |
500 |
|
Nil |
| 7.3.1(No.of Ribs) |
- |
0 |
|
Nil |
| 7.2 and Table 5, 6 & 7
Fig 1B(Wall thickness, Max) |
- |
500 |
|
Nil |
| 7.2 and Table 5, 6 & 7
Fig 1B(Wall thickness, Min) |
- |
0 |
|
Nil |
| 7.2 and Table 5, 6 & 7
Fig 1B(Mean Outer Diameter over Connection) |
- |
500 |
|
Nil |
| 7.2 and Table 5, 6 & 7
Fig 1B(Outer Diameter at any point, Max) |
- |
500 |
|
Nil |
| 7.2 and Table 5, 6 & 7
Fig 1B(Outer Diameter at any point , Min) |
- |
0 |
|
Nil |
| 7.2 and Table 5, 6 & 7
Fig 1B(Mean Outer Diameter of Pipe , Max) |
- |
500 |
|
Nil |
| 7.2 and Table 5, 6 & 7
Fig 1B(Mean Outer Diameter of Pipe, Min) |
- |
0 |
|
Nil |
| 7.2 and Table 5, 6 & 7
Fig 1B(Nominal Diameter) |
- |
500 |
|
Nil |
| 7.2 and Table 5, 6 & 7
Fig 1B(DIMENSIONS - Casing Pipes) |
- |
500 |
|
Nil |
| 4.1.2 (Ref. Cl 11 of IS 4669)(Composition -Sulphated ash content ) |
- |
950 |
|
Nil |
| 4.1.1 (Ref. 3.4.1. of IS 10151)(Composition - The monomer content (VCM content) in the
resin - Annex A ofIS 10151) |
- |
2750 |
|
Nil |
| 5.0(Colour of Pipes) |
- |
500 |
|
Nil |
| 9.7(Effect on Water
a) Lead (first extraction)
b) Lead (Third extraction)
c) Dialkyl Tin C4 & higher homologues measured as Tin (Third extraction)
d) Cadmium (All three extracts)
e) Mercury (All three extracts)
f) Other Toxic Substances
) |
- |
3000 |
|
Nil |
| 4.1.2(K-Value as per IS-4669) |
- |
1000 |
|
Nil |
|
09 Aug, 2028 |
-
- |
| 21 |
Central Institute of Petrochemicals Engineering & Technology (CIPET), Murthal
| 9121934
| IS 14887 (2014) |
Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sacks for packaging of 50 kg food grains – Specification (first revision) |
50 Kg |
21430 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 3.2(Tapes – Width and Thickness
( IS 6192/IS 11197)) |
- |
500 |
|
Nil |
| 3.2(Tapes – Linear Density
(IS 6192/IS 11197)) |
- |
700 |
|
Nil |
| 3.2(Tapes – Tenacity (IS 6192/IS 11197)) |
- |
1100 |
|
Nil |
| 3.2(Tapes – Elongation at point of rupture
(IS 6192/IS 11197)) |
- |
1100 |
|
Nil |
| 3.2(Tapes – Heat Shrinkage (HDPE) (Cl. 3.2 and IS 6192)) |
- |
700 |
|
Nil |
| 3.2(Tapes – Dimensional stability (PP)
(IS 11197)) |
- |
700 |
|
Nil |
| 3.2(Unlaminated Fabric Mass ) |
- |
500 |
|
Nil |
| 3.3.1(Bottom seam (IS 10789)) |
- |
1100 |
|
Nil |
| 4.1 and 3.4(Mass of bale (Cl. 4.1), Capacity (Cl 3.4)) |
- |
500 |
|
Nil |
| 4.2 and Table 1 ii(Dimensions ) |
- |
500 |
|
Nil |
| 5.2 and Table 1 iii(Ends per dm ) |
- |
500 |
|
Nil |
| 5.2 and Table 1 iv(Picks per dm ) |
- |
0 |
|
Ends & Picks including both test Charges is Rs. 250 |
| 4.2 and Table 1 v(Mass of sack ) |
- |
500 |
|
Nil |
| 4.2 and Table 1 vi(Average breaking strength of fabric ) |
- |
1100 |
|
U.V light Exposure Test Charges Rs. 10180 |
| 4.2 and Table 1 vi(Breaking strength of bottom seam ) |
- |
1100 |
|
Nil |
| 4.2 and Table 1 viii(Elongation at break of fabric ) |
- |
0 |
|
Charge for the same is included with Breaking strength of fabric charges |
| 4.2 and Table 1 ix(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering ) |
- |
1100 |
|
Nil |
| 4.2 and Table 1 x(Ash content ) |
- |
950 |
|
Nil |
| 3.2(Tapes – Width and Thickness
( IS 6192/IS 11197)) |
- |
500 |
|
Nil |
| 3.1(Material Identification) |
- |
1050 |
|
Test Method-Chemical Analysis |
| 3.1(Overall Migration) |
- |
1700 |
|
Overall Migration Distilled water/10 days/40°C
Specimen Charges Rs. 625 |
| 3.2(Density) |
- |
500 |
|
Nil |
| 3.2(MFI) |
- |
1100 |
|
Nil |
|
09 Aug, 2028 |
-
- |
| 22 |
Central Institute of Petrochemicals Engineering & Technology (CIPET), Murthal
| 9121934
| IS 10124 : Part 2 (2009) |
Fabricated pvc - U fittings for potable water supplies - Specification: Part 2 specific requirements for sockets (Second Revision) |
- |
7228 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 10.3 of IS 4985 & Cl. 3.1 of IS 12235(P-4)(Effect on water: Lead (First Extraction)) |
- |
3000 |
|
Nil |
| 10.3 of IS 4985 & Cl. 3.1 of IS 12235(P-4)(Effect on water: Lead (Third Extraction)) |
- |
0 |
|
Test Charges included in Effect on water: Lead (First Extraction) |
| 10.3 of IS 4985 & Cl. 3.1 of IS 12235(P-10)(Effect on water:Dialkyl tin C4 and
higher homologues
measured as tin (third
extraction)) |
- |
0 |
|
Test Charges included in Effect on water: Lead (First Extraction) |
| 10.3 of IS 4985 & Cl. 3.2 of IS 12235(P-4)(Effect on water: Cadmium (all three extracts)) |
- |
0 |
|
Test Charges included in Effect on water: Lead (First Extraction) |
| 10.3 of IS 4985 & Cl. 3.2 of IS 12235(P-4)(Effect on water: Mercury (all three extracts)) |
- |
0 |
|
Test Charges included in Effect on water: Lead (First Extraction) |
| 10.3 of IS 4985 & Cl. 3.2 of IS 12235(P-10)(Other toxic substances such as 'di-n-octyl-tin- s-s bis iso-octyl mercapto acetate' and 'butyl stearate' (third extraction)) |
- |
0 |
|
Test Charges included in Effect on water: Lead (First Extraction) |
| 10.7 of IS 4985(Sulphated Ash content, Annex-B of IS 4985) |
- |
1200 |
|
Nil |
| 3.2.1, Table-1, Fig-1(Nominal size) |
- |
500 |
|
Nil |
| 3.2.1, Table-1, Fig-1(Minimum wall thickness for working pressure) |
- |
500 |
|
Nil |
| Clause 3.2.2, and Fig. 2.(Minimum wall thickness for working pressure) |
- |
500 |
|
Nil |
| 3.2.2, and Fig. 2(Dimensions of Socket for Elastomeric Sealing Ring Joint) |
- |
500 |
|
Nil |
|
09 Aug, 2028 |
-
- |
| 23 |
Central Institute of Petrochemicals Engineering & Technology (CIPET), Murthal
| 9121934
| IS 10124 : Part 1 (2009) |
Fabricated PVC-U Fittings for Potable Water Supplies - Specification Part 1 General Requirements (Second Revision) |
- |
8470 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 3(Material) |
- |
1050 |
|
Nil |
| 4(Size of fitting) |
- |
500 |
|
Nil |
| 5.1 Table-1 Fig.1(Dimension of Socket length) |
- |
500 |
|
Nil |
| 5.1.2 Table-1(Dimensions of mean inside diameter at mid-point of socket depth) |
- |
0 |
|
Test Charges included in Dimension of Socket length |
| 5.1.3 (Out of Roundness Tolerance of Socket Inside Diameter) |
- |
0 |
|
Test Charges included in Dimension of Socket length |
| 6.1(Opacity test in accordance with IS 12235 (Part 3)) |
- |
575 |
|
Nil |
| 6.2(Short Term Hydraulic Test in accordance with Annex A) |
- |
850 |
|
Nil |
| 3.2.3(socket, measurements) |
- |
0 |
|
Test Charges included in Dimension of Socket length |
| 6.3(Effect on water test) |
- |
3000 |
|
Nil |
|
09 Aug, 2028 |
-
- |
| 24 |
Central Institute of Petrochemicals Engineering & Technology (CIPET), Murthal
| 9121934
| IS 7834 : Part 1 (1987) |
injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 1 General requirements |
- |
8403 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl.4(Minimum Thickness) |
- |
500 |
|
- |
| Cl. 5.1.1, 5.1.2, Table 1, Fig 1(Minimum Socket Length) |
- |
500 |
|
charge is included in Cl. 4 charge |
| Cl. 5.1.1, 5.1.2, Table 1, Fig 1(Mean Socket Internal Diameter at Mid-Point of Socket Length) |
- |
0 |
|
Charge is included in Cl. 4 charge |
| Cl. 5.1.1, 5.1.2, Table 1, Fig 1(Out-of-roundness tolerances of socket inside diameter) |
- |
0 |
|
charge is included in Cl. 4 charge |
| Cl. 6.1(Stress Relief Test- Appendix A) |
- |
700 |
|
- |
| Cl. 6.2(Opacity- Appendix B) |
- |
700 |
|
- |
| Cl. 6.3(Effect on Water[(Lead ( first extraction )]- Appendix C) |
- |
3000 |
|
- |
| Cl. 6.3(Effect on Water[(Lead ( third extraction )]- Appendix C) |
- |
0 |
|
Charge is included in Cl. 6.3 first extraction |
| Cl. 6.3(Effect on Water [Dialkyl tin C4, and higher homologues, measured as tin ( third extraction )]- Appendix C) |
- |
0 |
|
Charge is included in Cl. 6.3 first extraction |
| Cl. 6.3(Effect on Water [Other toxic substances ( third extraction )]- Appendix C) |
- |
0 |
|
Charge is included in Cl. 6.3 first extraction |
| Cl. 6.4(Short-Term Hydraulic Test- Appendix D) |
- |
850 |
|
- |
|
09 Aug, 2028 |
-
- |
| 25 |
Central Institute of Petrochemicals Engineering & Technology (CIPET), Murthal
| 9121934
| IS 10124 : Part 11 (2009) |
Fabricated pvc - U fittings for potable water supplies - Specification: Part 11 specific requirements for 40 degree bends (Second Revision) |
upto DN 400 mm |
5500 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 3.2.2, Table 1(Dimensions of 30 deg Bends) |
- |
500 |
|
- |
| 3.2.2, Table 2(Dimensions of 30 deg Bend for Elastomeric Sealing Ring Joint) |
- |
500 |
|
RS 1500subject to minimum test charges |
|
09 Aug, 2028 |
-
- |
| 26 |
Central Institute of Petrochemicals Engineering & Technology (CIPET), Murthal
| 9121934
| IS 10124 : Part 12 (2009) |
Fabricated pvc - U fittings for potable water supplies - Specification: Part 12 specific requirements for 22½ degree bends (Second Revision) |
Diameter upto 20 mm to 400 mm |
5550 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 3.2.2, Table 1(Dimensions of 22 ½ deg Bends) |
- |
500 |
|
- |
| 3.2.2, Table 2(Dimensions of 22 ½ deg Bend for Elastomeric Sealing Ring Joint) |
- |
500 |
|
- |
| 3.2.3(Socket, measurements) |
- |
500 |
|
- |
|
09 Aug, 2028 |
-
- |
| 27 |
Central Institute of Petrochemicals Engineering & Technology (CIPET), Murthal
| 9121934
| IS 10124 : Part 13 (2009) |
Fabricated PVC-U Fittings for Potable Water Supplies - Specification Part 13 Specific Requirements for 11¼oBends PART 12 SPECIFIC REQUIREMENTS FOR 22 ½o BENDS |
Upto DN 400 mm |
5550 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 3.2.2, Table 2(Dimension of 11 1/4° bends for Elastomeric sealing ring joint) |
- |
500 |
|
- |
| 3.2.2, Table 1(Dimension of 11 1/4° bends) |
- |
500 |
|
- |
| 3.2.3(Socket, Measurement) |
- |
500 |
|
- |
| 3.1(General) |
- |
5050 |
|
6.1 Opacity - Rs 700
6.2 Short term Hydraulic test (27 °C/1h.) Rs 850+Rs500
6.3 Effect on Water Rs. 3000 |
|
09 Aug, 2028 |
-
Upto 400mm |
| 28 |
URS PRODUCTS AND TESTING PVT. LTD. (A29), NOIDA
| 8168906
| IS/IEC 61730 : PART 2 (2016) |
Photovoltaic (PV) module safety qualification: Part 2 requirements for testing (First Revision) |
- |
1360000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Clause 10.2(Visual inspection MST 01) |
- |
4000 |
|
- |
| Clause 10.3(Performance at STC MST 02) |
- |
4500 |
|
- |
| Clause 10.4(Maximum powerdetermination MST 03) |
- |
4500 |
|
- |
| Clause 10.5(Insulation thickness test MST 04) |
- |
4500 |
|
- |
| Clause 10.6(Durability of markings MST 05) |
- |
8000 |
|
- |
| Clause 10.7(Sharp edge test MST 06) |
- |
8000 |
|
- |
| Clause 10.8(Bypass diode functionality test MST 07) |
- |
4500 |
|
- |
| Clause 10.9(Accessibility test MST 11) |
- |
4500 |
|
- |
| Clause 10.10(Cut susceptibility test MST 12) |
- |
10000 |
|
- |
| Clause 10.11(Continuity test of equipotential bonding MST 13) |
- |
4500 |
|
- |
| Clause 10.12(Impulse voltage test MST 14) |
- |
20000 |
|
- |
| Clause 10.13(Insulation test MST 16) |
- |
4500 |
|
- |
| Clause 10.14(Wet leakage current test MST 17) |
- |
4500 |
|
- |
| Clause 10.15(Temperature test MST 21) |
- |
30000 |
|
- |
| Clause 10.16(Hot-spot endurance test MST 22) |
- |
25000 |
|
- |
| Clause 10.17(Fire test MST 23) |
- |
75000 |
|
- |
| Clause 10.18(Ignitability test MST 24) |
- |
50000 |
|
- |
| Clause 10.19(Bypass diode thermal test MST 25) |
- |
25000 |
|
- |
| Clause 10.20(Reverse current overload test MST 26) |
- |
7500 |
|
- |
| Clause 10.21(Module breakage test MST 32) |
- |
10000 |
|
- |
| Clause 10.22(Screw connections test MST 33) |
- |
5000 |
|
- |
| Clause 10.23(Static mechanical load test MST 34) |
- |
25000 |
|
- |
| Clause 10.24(Peel test MST 35) |
- |
20000 |
|
- |
| Clause 10.25(Lap shear strength test MST 36) |
- |
15000 |
|
- |
| Clause 10.26(Materials creep test MST 37) |
- |
150000 |
|
- |
| Clause 10.27(Robustness of terminations test MST 42) |
- |
15000 |
|
- |
| Clause 10.28(Thermal cycling test MST 51) |
- |
200000 |
|
- |
| Clause 10.29(Humidity freeze test MST 52) |
- |
100000 |
|
- |
| Clause 10.30(Damp heat test MST 53) |
- |
200000 |
|
- |
| Clause 10.31(UV test MST 54) |
- |
150000 |
|
- |
| Clause 10.32(Cold conditioning MST 55) |
- |
150000 |
|
- |
| Clause 10.33(Dry heat conditioning MST 56) |
- |
101000 |
|
- |
|
26 Sep, 2027 |
-
- |
| 29 |
BIS, Eastern Regional Laboratory (ERL)
| None
| IS 10951 (2020) |
Specification for Polypropylene ( PP ) Materials for Moulding and Extrusion ( Second Revision ) |
All |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Clause 6.4.2 (Overall Migration, IS 9845, Annex D.2) |
- |
|
|
|
| Clause 3.5.1,Table-3 or Clause 6.2.1.1 (Melt Mass Flow-Rate (MFR) or Melt Flow Index,g/10min,IS 13360 (Part 4/Sec 1)/ASTM D1238) |
- |
|
|
|
| Clause 6.3.2,Table-8, Sl no.3 (Volume resistivity,IS 2071 (Part 1)) |
- |
|
|
|
|
- |
-
Mech except:
3.5.2 Flexural Modulus
3.5.3 Izod Impact Strength Test
6.3. Additional Requirements
Chem except:
6.3.2, Table 8 Thermal Property -Ignitability (Oxygen Index)
6.4.2 Pigments & Colourants
Electrical except:
6.3.2, Table 8 Electrical Property-Surface resistivity
6.3.2, Table 8 Electrical Property-Relative Permittivity
6.3.2, Table 8 Electrical Property-Dissipation Factor
6.3.2, Table 8 Electrical Property-Dielectric Strength |
| 30 |
Central Institute of Petrochemicals Engineering & Technology (CIPET), Murthal
| 9121934
| IS 4985 (2021) |
UNPLASTICIZED PVC PIPES FOR POTABLE WATER SUPPLIES SPECIFICATION Fourth Revision |
Class 1 to 6 and DN 20 to 400 mm |
32200 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 10.7(Sulphated Ash Content) |
- |
1200 |
|
Nil |
| 7(DIMENSIONS-PIPE-Nominal Diameter) |
- |
500 |
|
Nil |
| 10.1(Colour) |
- |
300 |
|
Nil |
| 10.1(Surface Finish) |
- |
300 |
|
Nil |
| 7.2.1.1 Table3(Angle of taper (Note-1)) |
- |
250 |
|
Nil |
| 5(CLASSIFICATION OF PIPES) |
- |
300 |
|
Nil |
| 7.1.1.1(DIMENSIONS-PIPE-Mean O.D. (Minimum)) |
- |
500 |
|
Nil |
| 7.1.1.1(DIMENSIONS-PIPE-Mean O.D. (Mamimum)) |
- |
0 |
|
Included in 7.1.1.1 |
| 7.1.1.1(DIMENSIONS-PIPE-Mean O.D. Variation) |
- |
0 |
|
Included in 7.1.1.1 |
| 7.1.1.2(DIMENSIONS-PIPE-O.D. at any Point (Minimum)) |
- |
0 |
|
Included in 7.1.1.1 |
| 7.1.1.2(DIMENSIONS-PIPE-O.D. at any Point (Maximum)) |
- |
0 |
|
Included in 7.1.1.1 |
| 7.1.1.2(DIMENSIONS-PIPE-Ovality (Maximum)) |
- |
0 |
|
Included in 7.1.1.1 |
| 7.1.2.1(DIMENSIONS-PIPE-Thickness(Minimum)) |
- |
0 |
|
Included in 7.1.1.1 |
| 7.1.2.1(DIMENSIONS-PIPE-Thickness(Maximum)) |
- |
0 |
|
Included in 7.1.1.1 |
| 7.1.2.1(DIMENSIONS-PIPE-Average Thickness) |
- |
0 |
|
Included in 7.1.1.1 |
| 7.2.1(DIMENSIONS-Socket) |
- |
0 |
|
Included in 7.1.1.1 |
| 7.2.1(DIMENSIONS-Socket) |
- |
0 |
|
Included in 7.1.1.1 |
| 7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Minimum Length) |
- |
0 |
|
Included in 7.1.1.1 |
| 7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Diameter at mid point of the socket length (Minimum)) |
- |
0 |
|
Included in 7.1.1.1 |
| 7.2.1.2(a)-Table 5(DIMENSIONS-Sockets for elastomeric sealing ring joints-Minimum depth of engagement) |
- |
0 |
|
Included in 7.1.1.1 |
| 7.2.1.2-Table 4(DIMENSIONS-Sockets for elastomeric sealing ring joints-Socket inner Diameter) |
- |
0 |
|
Included in 7.1.1.1 |
| 8(SEALING RINGS) |
- |
300 |
|
Nil |
| 9.1(PIPE ENDS) |
- |
300 |
|
Nil |
| 10.1(PHYSICAL AND CHEMICAL CHARACTERISTICS-Visual Appearance) |
- |
300 |
|
Nil |
| 10.2(PHYSICAL AND CHEMICAL CHARACTERISTICS-Opacity) |
- |
1100 |
|
Nil |
| 10.4(PHYSICAL AND CHEMICAL CHARACTERISTICS- Reversion Test) |
- |
1200 |
|
700 test charge +500 sample preparation |
| 10.5(PHYSICAL AND CHEMICAL CHARACTERISTICS- Vicat Softening Temperature) |
- |
1100 |
|
Nil |
| 10.6(PHYSICAL AND CHEMICAL CHARACTERISTICS- Density) |
- |
700 |
|
Nil |
| 11.1-Table 6(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Type Test)) |
- |
11000 |
|
Nil |
| 11.1-Table 6(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test)) |
- |
850 |
|
Nil |
| 11.1.1(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test)-for Plumbing pipes) |
- |
850 |
|
Nil |
| 11.2(Resistance to External Blows at 0°C) |
- |
1500 |
|
1000 test charge +500 sample preparation |
| 6.1.2(PVC Resin) |
- |
1100 |
|
Nil |
| 7.1.3(mean outside diameter, outside diameter at
any point, and wall thickness of plumbing pipes) |
- |
500 |
|
Nil |
| 11.1-Table 7(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Type Test)-for Integral Sealing Ring Sockets) |
- |
300 |
|
Nil |
| 11.1-Table 7(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test)-for Integral Sealing Ring Sockets) |
- |
850 |
|
Nil |
| 10.3(Effect on Water Test) |
- |
3000 |
|
Nil |
| 7.1.4(Length) |
- |
250 |
|
Nil |
| 6.1.1(VCM Content) |
- |
3000 |
|
Nil |
| 7.2.1.2b(Maximum inner diameter of groove) |
- |
250 |
|
Nil |
| 13.1(Marking) |
- |
250 |
|
Nil |
|
09 Aug, 2028 |
-
- |
