BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

14058 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

3541

BIS, Hyderabad Branch Laboratory (HYBL)

None

IS 17731 (2021)

Agro-Textiles Laminated Woven Orchard Protection Covers Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Clause No. 7, Table 1, (i) (Thickness, mm, Min)	-
Clause no. 7, Table 1, (ii) (Mass, g/m2, Min)	-
Clause No. 7, Table 1, (iii) a ("Average breaking strength of laminated woven orchard protection cover fabric (Strip method, 325 mm × 50 mm test piece with gauge length of 200 mm), N, Min, (a) Warpway")	-
Clause No. 7, Table 1, (iii) b ("Average breaking strength of laminated woven orchard protection cover fabric (Strip method, 325 mm × 50 mm test piece with gauge length of 200 mm), N, Min, (b) Weftway")	-
Clause No. 7, Table 1, (v) (Strain at maximum load, percent)	-
Clause No. 7, Table 1, (viii) (Ash content, percent, Max)	-

-
Partial test facility only

3542

BIS, Hyderabad Branch Laboratory (HYBL)

None

IS 17729 (2021)

Agro-Textiles Flexible Water Storage Tank for Agriculture and Horticulture Purposes Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Clause 5.6 , Table 1 (Dimensions of flexible water tank)	-
Clause 4.2 and 6.1, Table 2, (i) (a) (Tensile strength at break, kg/cm2 , Min a) Machine direction)	-
Clause 4.2 and 6.1, Table 2, (i) (b) (Tensile strength at break, kg/cm2 , Min b) Transverse direction)	-
Clause 4.2 and 6.1, Table 2, (ii) (a) (Elongation at break, percent, Min a) Machine direction)	-
clause 6.2 , Table 3, (ii) (b) (Elongation at break, percent, Min b) Weft)	-

-
Partial test facility only

3543

BIS, Hyderabad Branch Laboratory (HYBL)

None

IS 17728 (2021)

Agro Textiles - High Density Polyethylene (HDPE) Laminated Woven Lay Flat Tube and Fittings for use in Rain Irrigation System - Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1 (MATERIALS - HDPE Tapes)	-
6- Table 2- i) (REQUIREMENTS - Mass, g/m²)	-
6- Table 2- ii) (REQUIREMENTS - Breaking strength on 5 cm × 20 cm strip before UV exposure, N)	-
6- Table 2- iii) (REQUIREMENTS - Elongation at break)	-
6- Table 1- v) (REQUIREMENTS - Abrasion resistance)	-
6- Table 1- vi) (REQUIREMENTS - Trapezoid tear strength, N a) Warp b) Weft)	-
6- Table 1- vii) (REQUIREMENTS - Puncture strength)	-
Clause-6 Table-2 S.No-1 (viii) (Accelerated ageing test)	-
Clause-10 (Marking)	-

-
Partial test facility only

3544

BIS, Hyderabad Branch Laboratory (HYBL)

None

IS 17513 (2020)

Agro Textiles - Plant Support Nets for Agriculture and Horticulture Purposes - Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Clause No. 7.3, Table No. 2, (i) (GSM, g/m2)	-
Clause No. 6.2 (Tape width)	-
Clause No. 6.4 (Tie cord diameter)	-

-
Partial test facility only

3545

BIS, Hyderabad Branch Laboratory (HYBL)

None

IS 17358 : Part 2 (2020)

Agro textiles â€“ Fencing nets for agriculture and horticulture purposes â€“ Specification Part 2 Fencing nets made from mono filament yarns and combination of tape and mono filament yarns

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Clause 7.2 (i) (Mass g/m²)	-
Clause 7.2 (ii) (Average breaking strength of wind shield net fabric (Strip method, 325×50 mm test piece with gauge length of 200 mm))	-
Clause No. 4.2 (Width of the tape used in fabric)	-
Clause No. 4.2 (Density of the tape)	-

-
Partial test facility only

3546

BIS, Hyderabad Branch Laboratory (HYBL)

None

IS 17358 : Part 1 (2020)

Agro textiles “ Fencing nets for agriculture and horticulture purposes “ Specification Part 1 Fencing nets made from extruded polymer mesh

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
(vi) (Length)	-
(vi) (Width)	-
(vii) a (Tensile Strength before UV exposure, Machine Direction)	-
(vii) b (Tensile Strength before UV exposure, Traverse Direction)	-
(viii) a (Elongation before UV exposure, Machine Direction)	-
(viii) b (Elongation before UV exposure, Traverse Direction)	-
6.0 (TYPES ,(a)Light duty, b) Medium duty, and c) Heavy duty.)	-

-
Partial test facility only

3547

BIS, Hyderabad Branch Laboratory (HYBL)

None

IS 16627 (2017)

Agro textiles “ High density polyethylene (HDPE) laminated woven lay flat tube for use in mains and submains of drip irrigation system “ Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-6, Table-1 (i) (Mass, g/m², Min)	-
Cl-6, Table-2 (ii) (Breaking strength on 5 cm × 20 cm strip before UV exposure, N, Min)	-
Cl-6, Table-2 (iii) (Elongation at break, percent)	-
Cl-6, Table-2 (v) (Abrasion resistance)	-
Cl-6, Table-2 (vi) (Trapezoid tear strength, N, Min)	-
Cl-6, Table-2 (vii) (Puncture strength, N, Min)	-

-
Partial test facility only

3548

BIS, Hyderabad Branch Laboratory (HYBL)

None

IS 16390 (2015)

Agro textiles - Nylon knitted seamless gloves for tobacco harvesters - Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.2.1 (The gloves shall be of the design)	-

-
Partial test facility only

3549

BIS, Hyderabad Branch Laboratory (HYBL)

None

IS 16090 (2013)

Geo-synthetics – Geo-textiles used as protection (or cushioning) materials – Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.4, Table 1, (i) (Mass per unit area, g/m2)	-
4.4, Table 1, (ii) (Tensile strength, kN/m)	-
4.4, Table 1, (iii) (Trapezoidal tear strength, kN)	-
4.5, Table 1, (iv) (CBR puncture resistance, kN)	-

-
Partial test facility only

3550

BIS, Hyderabad Branch Laboratory (HYBL)

None

IS 16362 (2020)

Geosynthetics â€“ Geotextiles used in subgrade stabilization in pavement structures â€“ Specification (first revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
1 (Roll length- IS 1954)	-
1 (Roll width- IS 1954)	-
1 (Grab strength- IS 16342)	-
1 (Sewn seam strength- IS 15060)	-
1 (Trapezidal tear strength- IS 14293)	-
1 (CBR puncture strength- IS 16078)	-
1 (Permittivity- IS 14324)	-
1 (Apparent opening size (AOS)- IS 14294)	-

-
Partial test facility only

3551

JAWAHARLAL NEHRU ALUMINIUM RESEARCH DEVELOPMENT AND DESIGN CENTER, NAGPUR

7184804

IS 733 (1983)

Specification for wrought aluminium and aluminium alloy bars, rods and sections (For General Engineering Purposes) (Third Revision)

3200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Table-1, Clause - 5.1(Copper)	-	1200	-
Table-1, Clause - 5.1(Magnesium)	-	1200	-
Table-1, Clause - 5.1(Silicon)	-	1200	-
Table-1, Clause - 5.1(Iron)	-	1200	-
Table-1, Clause - 5.1(Zinc)	-	1200	-
Table-1, Clause - 5.1(Titanium)	-	1200	-
Table-1, Clause - 5.1(Chromium)	-	1200	-
Cl. 0.4, 5.1, Table 1(Ti+ V- IS 504 or by any other suitable instrumental method)	-	1200	-
Table-1, Clause - 5.1(Manganese)	-	1200	-
Cl. 5.1, Table 2(0.2 Percent proof stress- IS 1816)	-	1000	-
Cl. 5.1, Table 2(Tensile Strength- IS 1816)	-	1000	-
Cl. 5.1, Table 2(Elongation on 50 mm or 5.65√So Gauge Length)	-	1000	-
7(Dimension - IS 3965)	-	1000	-
Cl. 0.4, 5.1, Table 1(Aluminium- IS 504 or by any other suitable instrumental method)	-	0	-
Cl. 0.4, 5.1, Table 1(Copper- IS 504 or by any other suitable instrumental method)	-	1200	-
Cl. 0.4, 5.1, Table 1(Magnesium- IS 504 or by any other suitable instrumental method)	-	1200	-
Cl. 0.4, 5.1, Table 1(Silicon- IS 504 or by any other suitable instrumental method)	-	1200	-
Cl. 0.4, 5.1, Table 1(Iron- IS 504 or by any other suitable instrumental method)	-	1200	-
Cl. 0.4, 5.1, Table 1(Zinc- IS 504 or by any other suitable instrumental method)	-	1200	-
Cl. 0.4, 5.1, Table 1(Aluminium- IS 504 or by any other suitable instrumental method)	-	0	-
Cl. 0.4, 5.1, Table 1(Titanium and / or other grain refining elements - IS 504 or by any other suitable instrumental method)	-	1200	-
Cl. 0.4, 5.1, Table 1(Chromium- IS 504 or by any other suitable instrumental method)	-	1200	-
Cl. 0.4, 5.1, Table 1(Total Impurities- IS 504 or by any other suitable instrumental method)	-	1200	-
Cl. 0.4, 5.1, Table 1(Cr+ Mn- IS 504 or by any other suitable instrumental method)	-	1200	-

24 Apr, 2028

-
-

3552

Bharat Test House Pvt Ltd 1474 Sonipat Haryana

9135626

IS/IEC 61730 : PART 2 (2016)

Photovoltaic (PV) module safety qualification: Part 2 requirements for testing (First Revision)

Photovoltaic (PV) Module

847500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 10.2(Visual inspection MST 01)	-	7500	-
Clause 10.3(Performance at STC MST 02)	-	7500	-
Clause 10.4(Maximum powerdetermination MST 03)	-	12500	-
Clause 10.5(Insulation thickness test MST 04)	-	15000	-
Clause 10.6(Durability of markings MST 05)	-	15000	-
Clause 10.7(Sharp edge test MST 06)	-	15000	-
Clause 10.8(Bypass diode functionality test MST 07)	-	15000	-
Clause 10.9(Accessibility test MST 11)	-	15000	-
Clause 10.10(Cut susceptibility test MST 12)	-	15000	-
Clause 10.11(Continuity test of equipotential bonding MST 13)	-	20000	-
Clause 10.12(Impulse voltage test MST 14)	-	22500	-
Clause 10.13(Insulation test MST 16)	-	25000	-
Clause 10.14(Wet leakage current test MST 17)	-	15000	-
Clause 10.15(Temperature test MST 21)	-	45000	-
Clause 10.16(Hot-spot endurance test MST 22)	-	22500	-
Clause 10.17(Fire test MST 23)	-	175000	-
Clause 10.18(Ignitability test MST 24)	-	12500	-
Clause 10.19(Bypass diode thermal test MST 25)	-	12500	-
Clause 10.20(Reverse current overload test MST 26)	-	55000	-
Clause 10.21(Module breakage test MST 32)	-	27500	-
Clause 10.22(Screw connections test MST 33)	-	32500	-
Clause 10.23(Static mechanical load test MST 34)	-	12500	-
Clause 10.24(Peel test MST 35)	-	12500	-
Clause 10.25(Lap shear strength test MST 36)	-	5000	-
Clause 10.26(Materials creep test MST 37)	-	12500	-
Clause 10.27(Robustness of terminations test MST 42)	-	12500	-
Clause 10.28(Thermal cycling test MST 51)	-	17500	-
Clause 10.29(Humidity freeze test MST 52)	-	55000	-
Clause 10.30(Damp heat test MST 53)	-	40000	-
Clause 10.31(UV test MST 54)	-	27500	-
Clause 10.32(Cold conditioning MST 55)	-	40000	-
Clause 10.33(Dry heat conditioning MST 56)	-	30000	-

19 Mar, 2026

-
-

3553

Conformity Testing Labs Pvt. Ltd. Unit 2 (A33)

8139626

IS 4250 (2025)

Electric Food-Mixers (Liquidizers and Grinders) and Centrifugal Juicers ï¿½ Specification ( Second Revision )

39000 View breakup
-

Clause No.	Exclusion	Remark
Cl-4(General Requirements)	-	-
Cl-5(General Conditions for the tests)	-	-
Cl-6(Classification)	-	-
Cl-7(Marking)	-	-
Cl-8(Safety Requirements)	-	-
Cl-9(Endurance fpr motor and base assembly)	-	-
Cl-10.2("Grinding Coffee (for Machines that Have a Dry Grinding Arrangement)")	-	-
Cl-10.3(Whisking Egg Whites (for Machines that have Whisking Egg Arrangement))	-	-
Cl-10.4(Idli Batter)	-	-
Cl-10.5(Operational Tests for Juicers)	-	-
Cl-11(Temperature Withstand Test for Bowl)	-	-
Cl-12.1(Test for Switches)	-	-
Cl-13(Strength of Assembly)	-	-
Cl-14.2, 14.3 Table-2 (i)(Protection against access to live parts)	-	-
Cl-14.2, Table-2 (ii)(Power input and current)	-	-
Cl-14.2, 14.3 Table-2 (iii)(Leakage current and electric strength at operating temperature)	-	-
Cl-14.2, Table-2 (iv)(Moisture resistance)	-	-
Cl-14.2, Table-2 (v)(Leakage current and electric strength)	-	-
Cl-14.2, 14.3 Table-2 (vi)(Provision for earthing)	-	-
Cl-19.11.4.1(Electrostatic discharges)	-	-
Cl-19.11.4.3(Fast transient bursts)	-	-
Cl-19.11.4.4(Surge immunity test)	-	-

05 Apr, 2027

-
Included w.e.f 07.05.2025 Exclusion: Cl-19.11.4.2 (Radiated fields), Cl-19.11.4.5 (Immunity to conducted discharges), Cl-19.11.4.6 (Class 3 Voltage dips and interruptions), Cl-19.11.4.7 (Harmonics)

3554

Bharat Test House Pvt. Ltd. 1668 Sonipat

9168306

IS 13382 (2018)

Cast iron specials for mechanical and push-on flexible joints for pressure pipes for water, gas and sewage - Specification (Second Revision)

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Thickness Wall, mm )	-	500	-
7(Joints)	-	500	-
7.1(Type of Joints)	-	500	-
7.2(Push on joints)	-	500	-
7.3(Flange and mechanical joints)	-	500	-
7.4(Bolt and hole circle)	-	500	-
7.5(Flanges)	-	500	-
7.6(Flanges)	-	500	-
8(Rubber gaskets)	-	2000	-
8.2(Dimenmsions of Rubber gaskets)	-	500	-
10(Mechanical Test)	-	2300	-
10.1(Tensile Stregth, Mpa)	-	1500	-
10.2(Hardness, HBW)	-	800	-
11(Hydrostatic test)	-	3000	-
11.2(Withstand Hydrostatic Pressure)	-	3000	-
12(Sizes)	-	500	-
12.2(Dimensions, mm)	-	500	-
12.2(e)	-	500	-
12.2(R)	-	500	-
12.2(L)	-	500	-
12.2(Socket)	-	500	-
12.2(D)	-	500	-
12.2(Cylinder Pipe)	-	500	-
12.2(b)	-	500	-
12.2(D1)	-	500	-
12.2(W)	-	500	-
12.2(P)	-	500	-
12.2(X)	-	500	-
12.2(Y)	-	500	-
12.2(Z)	-	500	-
12.2(S)	-	500	-
12.2(Follower Gland)	-	500	-
12.2(D)	-	500	-
12.2(C )	-	500	-
12.2(E)	-	500	-
12.2(F)	-	500	-
12.2(Hole Dia)	-	500	-
12.2(N)	-	500	-
12.2(M)	-	500	-
12.2(A)	-	500	-
12.2(Dia of Bolt)	-	500	-
12.2(L)	-	500	-
12.2(No of Bolt)	-	500	-
12.2(Rubber Gasket )	-	500	-
12.2(N)	-	2000	-
12.2(Q)	-	500	-
12.2(R)	-	500	-
12.2(T)	-	500	-
12.2(U)	-	500	-
12.2(V)	-	500	-
14(Coating Test at 0 and 65 Degree Centegrade)	-	2000	-
15(Internal Lining)	-	2000	-
15.1(Cement mortor lining)	-	1500	-
17.2(Flexible Joints)	-	1000	-
18.1(Positive internal hydrostatic pressure)	-	3000	-
18.3(Stregth and Leak tightness test for flanged joints)	-	3000	-
6(Thickness Wall, mm )	-	500	-
7(Joints)	-	500	-
7.1(Type of Joints)	-	500	-
7.2(Push on joints)	-	500	-
7.3(Flange and mechanical joints)	-	500	-
7.4(Bolt and hole circle)	-	500	-
7.5(Flanges)	-	500	-
7.6(Flanges)	-	500	-
10(Mechanical Test)	-	500	-
10.1(Tensile Stregth, Mpa)	-	500	-
10.2(Hardness, HBW)	-	500	-
11(Hydrostatic test)	-	500	-
11.2(Withstand Hydrostatic Pressure)	-	500	-
12(Sizes)	-	500	-
12.2(Dimensions, mm)	-	500	-
12.2(e)	-	500	-
12.2(R)	-	500	-
12.2(L)	-	500	-
12.2(Socket)	-	500	-
12.2(D)	-	500	-
12.2(Cylinder Pipe)	-	500	-
12.2(b)	-	500	-
12.2(D1)	-	500	-
12.2(W)	-	500	-
12.2(P)	-	500	-
12.2(X)	-	500	-
12.2(Y)	-	500	-
12.2(Z)	-	500	-
12.2(S)	-	500	-
12.2(Follower Gland)	-	500	-
12.2(D)	-	500	-
12.2(C )	-	500	-
12.2(E)	-	500	-
12.2(F)	-	500	-
12.2(Hole Dia)	-	500	-
12.2(N)	-	500	-
12.2(M)	-	500	-
12.2(A)	-	500	-
12.2(Dia of Bolt)	-	500	-
12.2(Q)	-	500	-
12.2(R)	-	500	-
12.2(T)	-	500	-
12.2(U)	-	500	-
12.2(V)	-	500	-
14(Coating Test at 0 and 65 Degree Centegrade)	-	2000	-
15(Internal Lining)	-	2000	-
15.1(Cement mortor lining)	-	1500	-
17.2(Flexible Joints)	-	1000	-
18.1(Positive internal hydrostatic pressure)	-	3000	-
18.3(Stregth and Leak tightness test for flanged joints)	-	3000	-
8(Rubber gaskets)	-	2000	-
8.2(Dimenmsions of Rubber gaskets)	-	2000	-
12.2(L)	-	500	-
12.2(No of Bolt)	-	500	-
12.2(Rubber Gasket )	-	500	-
12.2(N)	-	500	-
6(Thickness Wall, mm )	-	0	-
7(Joints)	-	0	-
7.1(Type of Joints)	-	0	-
7.2(Push on joints)	-	0	-
7.3(Flange and mechanical joints)	-	0	-
7.4(Bolt and hole circle)	-	0	-
7.5(Flanges)	-	0	-
7.6(Flanges)	-	0	-
8(Rubber gaskets)	-	0	-
8.2(Dimenmsions of Rubber gaskets)	-	0	-
10(Mechanical Test)	-	0	-
10.1(Tensile Stregth, Mpa)	-	0	-
10.2(Hardness, HBW)	-	0	-
11(Hydrostatic test)	-	0	-
11.2(Withstand Hydrostatic Pressure)	-	0	-
12(Sizes)	-	0	-
12.2(Dimensions, mm)	-	0	-
12.2(e)	-	0	-
12.2(R)	-	0	-
12.2(L)	-	0	-
12.2(Socket)	-	0	-
12.2(D)	-	0	-
12.2(Cylinder Pipe)	-	0	-
12.2(b)	-	0	-
12.2(D1)	-	0	-
12.2(W)	-	0	-
12.2(P)	-	0	-
12.2(X)	-	0	-
12.2(Y)	-	0	-
12.2(Z)	-	0	-
12.2(S)	-	0	-
12.2(Follower Gland)	-	0	-
12.2(D)	-	0	-
12.2(C )	-	0	-
12.2(E)	-	0	-
12.2(F)	-	0	-
12.2(Hole Dia)	-	0	-
12.2(N)	-	0	-
12.2(M)	-	0	-
12.2(A)	-	0	-
12.2(Dia of Bolt)	-	0	-
12.2(L)	-	0	-
12.2(No of Bolt)	-	0	-
12.2(Rubber Gasket )	-	0	-
12.2(N)	-	0	-
12.2(Q)	-	0	-
12.2(R)	-	0	-
12.2(T)	-	0	-
12.2(U)	-	0	-
12.2(V)	-	0	-
14(Coating Test at 0 and 65 Degree Centegrade)	-	0	-
15(Internal Lining)	-	0	-
15.1(Cement mortor lining)	-	0	-
17.2(Flexible Joints)	-	0	-
18.1(Positive internal hydrostatic pressure)	-	0	-
18.3(Stregth and Leak tightness test for flanged joints)	-	0	-
6(Thickness Wall, mm )	-	0	-
7(Joints)	-	0	-
7.1(Type of Joints)	-	0	-
7.2(Push on joints)	-	0	-
7.3(Flange and mechanical joints)	-	0	-
7.4(Bolt and hole circle)	-	0	-
7.5(Flanges)	-	0	-
7.6(Flanges)	-	0	-
10(Mechanical Test)	-	0	-
10.1(Tensile Stregth, Mpa)	-	0	-
10.2(Hardness, HBW)	-	0	-
11(Hydrostatic test)	-	0	-
11.2(Withstand Hydrostatic Pressure)	-	0	-
12(Sizes)	-	0	-
12.2(Dimensions, mm)	-	0	-
12.2(e)	-	0	-
12.2(R)	-	0	-
12.2(L)	-	0	-
12.2(Socket)	-	0	-
12.2(D)	-	0	-
12.2(Cylinder Pipe)	-	0	-
12.2(b)	-	0	-
12.2(D1)	-	0	-
12.2(W)	-	0	-
12.2(P)	-	0	-
12.2(X)	-	0	-
12.2(Y)	-	0	-
12.2(Z)	-	0	-
12.2(S)	-	0	-
12.2(Follower Gland)	-	0	-
12.2(D)	-	0	-
12.2(C )	-	0	-
12.2(E)	-	0	-
12.2(F)	-	0	-
12.2(Hole Dia)	-	0	-
12.2(N)	-	0	-
12.2(M)	-	0	-
12.2(A)	-	0	-
12.2(Dia of Bolt)	-	0	-
12.2(Q)	-	0	-
12.2(R)	-	0	-
12.2(T)	-	0	-
12.2(U)	-	0	-
12.2(V)	-	0	-
14(Coating Test at 0 and 65 Degree Centegrade)	-	0	-
15(Internal Lining)	-	0	-
15.1(Cement mortor lining)	-	0	-
17.2(Flexible Joints)	-	0	-
18.1(Positive internal hydrostatic pressure)	-	0	-
18.3(Stregth and Leak tightness test for flanged joints)	-	0	-
8(Rubber gaskets)	-	0	-
8.2(Dimenmsions of Rubber gaskets)	-	0	-
12.2(L)	-	0	-
12.2(No of Bolt)	-	0	-
12.2(Rubber Gasket )	-	0	-
12.2(N)	-	0	-
6(Thickness Wall, mm )	-	0	-
7(Joints)	-	0	-
7.1(Type of Joints)	-	0	-
7.2(Push on joints)	-	0	-
7.3(Flange and mechanical joints)	-	0	-
7.4(Bolt and hole circle)	-	0	-
7.5(Flanges)	-	0	-
7.6(Flanges)	-	0	-
8(Rubber gaskets)	-	0	-
8.2(Dimenmsions of Rubber gaskets)	-	0	-
10(Mechanical Test)	-	0	-
10.1(Tensile Stregth, Mpa)	-	0	-
10.2(Hardness, HBW)	-	0	-
11(Hydrostatic test)	-	0	-
11.2(Withstand Hydrostatic Pressure)	-	0	-
12(Sizes)	-	0	-
12.2(Dimensions, mm)	-	0	-
12.2(e)	-	0	-
12.2(R)	-	0	-
12.2(L)	-	0	-
12.2(Socket)	-	0	-
12.2(D)	-	0	-
12.2(Cylinder Pipe)	-	0	-
12.2(b)	-	0	-
12.2(D1)	-	0	-
12.2(W)	-	0	-
12.2(P)	-	0	-
12.2(X)	-	0	-
12.2(Y)	-	0	-
12.2(Z)	-	0	-
12.2(S)	-	0	-
12.2(Follower Gland)	-	0	-
12.2(D)	-	0	-
12.2(C )	-	0	-
12.2(E)	-	0	-
12.2(F)	-	0	-
12.2(Hole Dia)	-	0	-
12.2(N)	-	0	-
12.2(M)	-	0	-
12.2(A)	-	0	-
12.2(Dia of Bolt)	-	0	-
12.2(L)	-	0	-
12.2(No of Bolt)	-	0	-
12.2(Rubber Gasket )	-	0	-
12.2(N)	-	0	-
12.2(Q)	-	0	-
12.2(R)	-	0	-
12.2(T)	-	0	-
12.2(U)	-	0	-
12.2(V)	-	0	-
14(Coating Test at 0 and 65 Degree Centegrade)	-	0	-
15(Internal Lining)	-	0	-
15.1(Cement mortor lining)	-	0	-
17.2(Flexible Joints)	-	0	-
18.1(Positive internal hydrostatic pressure)	-	0	-
18.3(Stregth and Leak tightness test for flanged joints)	-	0	-
6(Thickness Wall, mm )	-	0	-
7(Joints)	-	0	-
7.1(Type of Joints)	-	0	-
7.2(Push on joints)	-	0	-
7.3(Flange and mechanical joints)	-	0	-
7.4(Bolt and hole circle)	-	0	-
7.5(Flanges)	-	0	-
7.6(Flanges)	-	0	-
10(Mechanical Test)	-	0	-
10.1(Tensile Stregth, Mpa)	-	0	-
10.2(Hardness, HBW)	-	0	-
11(Hydrostatic test)	-	0	-
11.2(Withstand Hydrostatic Pressure)	-	0	-
12(Sizes)	-	0	-
12.2(Dimensions, mm)	-	0	-
12.2(e)	-	0	-
12.2(R)	-	0	-
12.2(L)	-	0	-
12.2(Socket)	-	0	-
12.2(D)	-	0	-
12.2(Cylinder Pipe)	-	0	-
12.2(b)	-	0	-
12.2(D1)	-	0	-
12.2(W)	-	0	-
12.2(P)	-	0	-
12.2(X)	-	0	-
12.2(Y)	-	0	-
12.2(Z)	-	0	-
12.2(S)	-	0	-
12.2(Follower Gland)	-	0	-
12.2(D)	-	0	-
12.2(C )	-	0	-
12.2(E)	-	0	-
12.2(F)	-	0	-
12.2(Hole Dia)	-	0	-
12.2(N)	-	0	-
12.2(M)	-	0	-
12.2(A)	-	0	-
12.2(Dia of Bolt)	-	0	-
12.2(Q)	-	0	-
12.2(R)	-	0	-
12.2(T)	-	0	-
12.2(U)	-	0	-
12.2(V)	-	0	-
14(Coating Test at 0 and 65 Degree Centegrade)	-	0	-
15(Internal Lining)	-	0	-
15.1(Cement mortor lining)	-	0	-
17.2(Flexible Joints)	-	0	-
18.1(Positive internal hydrostatic pressure)	-	0	-
18.3(Stregth and Leak tightness test for flanged joints)	-	0	-
8(Rubber gaskets)	-	0	-
8.2(Dimenmsions of Rubber gaskets)	-	0	-
12.2(L)	-	0	-
12.2(No of Bolt)	-	0	-
12.2(Rubber Gasket )	-	0	-
12.2(N)	-	0	-
6(Thickness Wall, mm )	-	0	-
7(Joints)	-	0	-
7.1(Type of Joints)	-	0	-
7.2(Push on joints)	-	0	-
7.3(Flange and mechanical joints)	-	0	-
7.4(Bolt and hole circle)	-	0	-
7.5(Flanges)	-	0	-
7.6(Flanges)	-	0	-
8(Rubber gaskets)	-	0	-
8.2(Dimenmsions of Rubber gaskets)	-	0	-
10(Mechanical Test)	-	0	-
10.1(Tensile Stregth, Mpa)	-	0	-
10.2(Hardness, HBW)	-	0	-
11(Hydrostatic test)	-	0	-
11.2(Withstand Hydrostatic Pressure)	-	0	-
12(Sizes)	-	0	-
12.2(Dimensions, mm)	-	0	-
12.2(e)	-	0	-
12.2(R)	-	0	-
12.2(L)	-	0	-
12.2(Socket)	-	0	-
12.2(D)	-	0	-
12.2(Cylinder Pipe)	-	0	-
12.2(b)	-	0	-
12.2(D1)	-	0	-
12.2(W)	-	0	-
12.2(P)	-	0	-
12.2(X)	-	0	-
12.2(Y)	-	0	-
12.2(Z)	-	0	-
12.2(S)	-	0	-
12.2(Follower Gland)	-	0	-
12.2(D)	-	0	-
12.2(C )	-	0	-
12.2(E)	-	0	-
12.2(F)	-	0	-
12.2(Hole Dia)	-	0	-
12.2(N)	-	0	-
12.2(M)	-	0	-
12.2(A)	-	0	-
12.2(Dia of Bolt)	-	0	-
12.2(L)	-	0	-
12.2(No of Bolt)	-	0	-
12.2(Rubber Gasket )	-	0	-
12.2(N)	-	0	-
12.2(Q)	-	0	-
12.2(R)	-	0	-
12.2(T)	-	0	-
12.2(U)	-	0	-
12.2(V)	-	0	-
14(Coating Test at 0 and 65 Degree Centegrade)	-	0	-
15(Internal Lining)	-	0	-
15.1(Cement mortor lining)	-	0	-
17.2(Flexible Joints)	-	0	-
18.1(Positive internal hydrostatic pressure)	-	0	-
18.3(Stregth and Leak tightness test for flanged joints)	-	0	-
6(Thickness Wall, mm )	-	0	-
7(Joints)	-	0	-
7.1(Type of Joints)	-	0	-
7.2(Push on joints)	-	0	-
7.3(Flange and mechanical joints)	-	0	-
7.4(Bolt and hole circle)	-	0	-
7.5(Flanges)	-	0	-
7.6(Flanges)	-	0	-
10(Mechanical Test)	-	0	-
10.1(Tensile Stregth, Mpa)	-	0	-
10.2(Hardness, HBW)	-	0	-
11(Hydrostatic test)	-	0	-
11.2(Withstand Hydrostatic Pressure)	-	0	-
12(Sizes)	-	0	-
12.2(Dimensions, mm)	-	0	-
12.2(e)	-	0	-
12.2(R)	-	0	-
12.2(L)	-	0	-
12.2(Socket)	-	0	-
12.2(D)	-	0	-
12.2(Cylinder Pipe)	-	0	-
12.2(b)	-	0	-
12.2(D1)	-	0	-
12.2(W)	-	0	-
12.2(P)	-	0	-
12.2(X)	-	0	-
12.2(Y)	-	0	-
12.2(Z)	-	0	-
12.2(S)	-	0	-
12.2(Follower Gland)	-	0	-
12.2(D)	-	0	-
12.2(C )	-	0	-
12.2(E)	-	0	-
12.2(F)	-	0	-
12.2(Hole Dia)	-	0	-
12.2(N)	-	0	-
12.2(M)	-	0	-
12.2(A)	-	0	-
12.2(Dia of Bolt)	-	0	-
12.2(Q)	-	0	-
12.2(R)	-	0	-
12.2(T)	-	0	-
12.2(U)	-	0	-
12.2(V)	-	0	-
14(Coating Test at 0 and 65 Degree Centegrade)	-	0	-
15(Internal Lining)	-	0	-
15.1(Cement mortor lining)	-	0	-
17.2(Flexible Joints)	-	0	-
18.1(Positive internal hydrostatic pressure)	-	0	-
18.3(Stregth and Leak tightness test for flanged joints)	-	0	-
8(Rubber gaskets)	-	0	-
8.2(Dimenmsions of Rubber gaskets)	-	0	-
12.2(L)	-	0	-
12.2(No of Bolt)	-	0	-
12.2(Rubber Gasket )	-	0	-
12.2(N)	-	0	-
6(Thickness Wall, mm )	-	-	-
7(Joints)	-	-	-
7.1(Type of Joints)	-	-	-
7.2(Push on joints)	-	-	-
7.3(Flange and mechanical joints)	-	-	-
7.4(Bolt and hole circle)	-	-	-
7.5(Flanges)	-	-	-
7.6(Flanges)	-	-	-
8(Rubber gaskets)	-	-	-
8.2(Dimenmsions of Rubber gaskets)	-	-	-
10(Mechanical Test)	-	-	-
10.1(Tensile Stregth, Mpa)	-	-	-
10.2(Hardness, HBW)	-	-	-
11(Hydrostatic test)	-	-	-
11.2(Withstand Hydrostatic Pressure)	-	-	-
12(Sizes)	-	-	-
12.2(Dimensions, mm)	-	-	-
12.2(e)	-	-	-
12.2(R)	-	-	-
12.2(L)	-	-	-
12.2(Socket)	-	-	-
12.2(D)	-	-	-
12.2(Cylinder Pipe)	-	-	-
12.2(b)	-	-	-
12.2(D1)	-	-	-
12.2(W)	-	-	-
12.2(P)	-	-	-
12.2(X)	-	-	-
12.2(Y)	-	-	-
12.2(Z)	-	-	-
12.2(S)	-	-	-
12.2(Follower Gland)	-	-	-
12.2(D)	-	-	-
12.2(C )	-	-	-
12.2(E)	-	-	-
12.2(F)	-	-	-
12.2(Hole Dia)	-	-	-
12.2(N)	-	-	-
12.2(M)	-	-	-
12.2(A)	-	-	-
12.2(Dia of Bolt)	-	-	-
12.2(L)	-	-	-
12.2(No of Bolt)	-	-	-
12.2(Rubber Gasket )	-	-	-
12.2(N)	-	-	-
12.2(Q)	-	-	-
12.2(R)	-	-	-
12.2(T)	-	-	-
12.2(U)	-	-	-
12.2(V)	-	-	-
14(Coating Test at 0 and 65 Degree Centegrade)	-	-	-
15(Internal Lining)	-	-	-
15.1(Cement mortor lining)	-	-	-
17.2(Flexible Joints)	-	-	-
18.1(Positive internal hydrostatic pressure)	-	-	-
18.3(Stregth and Leak tightness test for flanged joints)	-	-	-
6(Thickness Wall, mm )	-	-	-
7(Joints)	-	-	-
7.1(Type of Joints)	-	-	-
7.2(Push on joints)	-	-	-
7.3(Flange and mechanical joints)	-	-	-
7.4(Bolt and hole circle)	-	-	-
7.5(Flanges)	-	-	-
7.6(Flanges)	-	-	-
10(Mechanical Test)	-	-	-
10.1(Tensile Stregth, Mpa)	-	-	-
10.2(Hardness, HBW)	-	-	-
11(Hydrostatic test)	-	-	-
11.2(Withstand Hydrostatic Pressure)	-	-	-
12(Sizes)	-	-	-
12.2(Dimensions, mm)	-	-	-
12.2(e)	-	-	-
12.2(R)	-	-	-
12.2(L)	-	-	-
12.2(Socket)	-	-	-
12.2(D)	-	-	-
12.2(Cylinder Pipe)	-	-	-
12.2(b)	-	-	-
12.2(D1)	-	-	-
12.2(W)	-	-	-
12.2(P)	-	-	-
12.2(X)	-	-	-
12.2(Y)	-	-	-
12.2(Z)	-	-	-
12.2(S)	-	-	-
12.2(Follower Gland)	-	-	-
12.2(D)	-	-	-
12.2(C )	-	-	-
12.2(E)	-	-	-
12.2(F)	-	-	-
12.2(Hole Dia)	-	-	-
12.2(N)	-	-	-
12.2(M)	-	-	-
12.2(A)	-	-	-
12.2(Dia of Bolt)	-	-	-
12.2(Q)	-	-	-
12.2(R)	-	-	-
12.2(T)	-	-	-
12.2(U)	-	-	-
12.2(V)	-	-	-
14(Coating Test at 0 and 65 Degree Centegrade)	-	-	-
15(Internal Lining)	-	-	-
15.1(Cement mortor lining)	-	-	-
17.2(Flexible Joints)	-	-	-
18.1(Positive internal hydrostatic pressure)	-	-	-
18.3(Stregth and Leak tightness test for flanged joints)	-	-	-
8(Rubber gaskets)	-	-	-
8.2(Dimenmsions of Rubber gaskets)	-	-	-
12.2(L)	-	-	-
12.2(No of Bolt)	-	-	-
12.2(Rubber Gasket )	-	-	-
12.2(N)	-	-	-

26 Jul, 2027

-
Included w.e.f 04.09.2025

3555

Global Scientific Solution (P) Ltd.

8189526

IS 2082 (2018)

Stationary storage type electric water heaters - Specification (Fifth Revision)

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking)	-	1000	-
7(Marking)	-	1000	-
7(Marking)	-	1000	-
7(Marking)	-	1000	-
7(Marking)	-	1000	-
7(Marking)	-	1000	-
7(Marking)	-	1000	-
7(Marking)	-	1000	-
7(Marking)	-	1000	-
7(Marking)	-	1000	-
7(Marking)	-	1000	-
7(Marking)	-	1000	-
7(Marking)	-	1000	-
7(Marking)	-	1000	-
7(Marking)	-	1000	-
7(Marking)	-	1000	-
7(Marking)	-	1000	-
7(Marking)	-	1000	-
7(Marking)	-	1000	-
7(Marking)	-	1000	-
7(Marking)	-	1000	-
7(Marking)	-	1000	-
7(Marking)	-	1000	-
7(Marking)	-	1000	-
7(Marking)	-	1000	-
7(Marking)	-	1000	-
7(Marking)	-	1000	-
7(Marking)	-	1000	-
6(Classification )	-	500	-
6(Classification )	-	500	-
(Cl.8 of IS 302-2-21:2011)(Protection Against Access to Live Parts)	-	1000	-
(Cl.10 of IS 302-2-21: 2011)(Power Input & Current)	-	1000	-
(Cl.11 of 302-2-21:2011)(Heating)	-	1000	-
(Cl.11 of 302-2-21:2011)(Heating)	-	1000	-
(Cl.11 of 302-2-21:2011)(Heating)	-	1000	-
(Cl.13 of IS 302-2-21:2011)(Leakage Current )	-	1000	-
(Cl.13 of IS 302-2-21:2011)(Electrical Strength at Operating Temperature)	-	1000	-
(Cl.14ofIS302-2-21:2011)(Transient Over Voltages)	-	1000	-
(Cl.15 of IS 302-2-21-2011)(Moisture Resistance)	-	2000	-
(Cl.15 of IS 302-2-21-2011)(Moisture Resistance)	-	2000	-
(Cl.15 of IS 302-2-21-2011)(Moisture Resistance)	-	2000	-
(Cl.17 of IS 302-2-21:2011)(Overload protection of transformers & associated circuits)	-	1000	-
(Cl.19 of IS 302-2-21:2011)(Abnormal Operation)	-	1000	-
(Cl.19 of IS 302-2-21:2011)(Abnormal Operation)	-	1000	-
(Cl.19 of IS 302-2-21:2011)(Abnormal Operation)	-	1000	-
(Cl.19 of IS 302-2-21:2011)(Abnormal Operation)	-	1000	-
(Cl.20 of IS 302-2-21:2011)(Stability & Mechanical Hazards)	-	1000	-
(Cl.21ofIS302-2-21:2011)(Mechanical strength)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	1000	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	1000	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	1000	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	1000	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	1000	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	1000	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	1000	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	1000	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	1000	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	1000	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	1000	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	1000	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	1000	-
(Cl.24ofIS302-221:2011)(Component)	-	1000	-
(Cl.24ofIS302-221:2011)(Component)	-	1000	-
(Cl.24ofIS302-221:2011)(Component)	-	1000	-
(Cl.24ofIS302-221:2011)(Component)	-	1000	-
(Cl.24ofIS302-221:2011)(Component)	-	1000	-
(Cl.24ofIS302-221:2011)(Component)	-	1000	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	1000	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	1000	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	1000	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	1000	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	1000	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	1000	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	1000	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	1000	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	1000	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	1000	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	1000	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	1000	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	1000	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	1000	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	1000	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	1000	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	1000	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	1000	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	1000	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	1000	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	1000	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	1000	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	1000	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	1000	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	1000	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	1000	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	1000	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	1000	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	1000	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	1000	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	1000	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	1000	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	1000	-
(Cl.27 of IS 302-2-21:2011)(Provision for Earthing)	-	1000	-
(Cl.27 of IS 302-2-21:2011)(Provision for Earthing)	-	1000	-
(Cl.27 of IS 302-2-21:2011)(Provision for Earthing)	-	1000	-
(Cl.27 of IS 302-2-21:2011)(Provision for Earthing)	-	1000	-
(Cl.27 of IS 302-2-21:2011)(Provision for Earthing)	-	1000	-
(Cl.27 of IS 302-2-21:2011)(Provision for Earthing)	-	1000	-
(Cl.28 of IS 302-2-21:2011)(Screws & Connections)	-	1000	-
(Cl.29ofIS302-2-21:2011)(Clearances, Creepage Distances and Solid Insulation)	-	1000	-
(Cl.30 of IS 302-2-21:2011)(Resistance to Heat & Fire)	-	1000	-
(Cl.30 of IS 302-2-21:2011)(Resistance to Heat & Fire)	-	1000	-
(Cl.31 of IS 302-2-21:2011)(Resistance to Rusting)	-	1000	-
(Cl.15 of IS 2082:2018)(Verification of the Rated Capacity)	-	1000	-
(Cl.16 of IS 2082:2018)(Standing Loss per 24 Hours)	-	2000	-
(Cl.17 of IS 2082:2018)(Hot Water Output)	-	1000	-
(Cl.18 of IS 2082:2018)( Reheating Time)	-	1000	-
(Cl.19 of IS 2082:2018)(Mixing Factor)	-	1000	-
(Cl.20 of IS 2082:2018)(Deviation of Dial Calibration)	-	1000	-
(Cl.21 of IS 2082:2018)(Cyclic Temperature Variation)	-	1000	-
(Cl.22 of IS 2082:2018)(Finish)	-	500	-
Cl.22 of IS 2082:2018(Finish)	-	500	-
Cl.21 of IS 2082:2018(Cyclic Temperature Variation)	-	1000	-
Cl.20 of IS 2082:2018(Deviation of Dial Calibration)	-	1000	-
Cl.19 of IS 2082:2018(Mixing Factor)	-	1000	-
Cl.18 of IS 2082:2018( Reheating Time)	-	1000	-
Cl.17 of IS 2082:2018(Hot Water Output)	-	1000	-
Cl.16 of IS 2082:2018(Standing Loss per 24 Hours)	-	2000	-
Cl.15 of IS 2082:2018(Verification of the Rated Capacity)	-	1000	-
Cl.31 of IS 302-2-21:2018(Resistance to Rusting)	-	1000	-
Cl.30.2 of IS 302-1:2008(Resistance to Heat & Fire : Glow wire test )	-	1000	-
Cl.30.1 of IS 302-1:2008(Resistance to Heat & Fire : Ball pressure test )	-	1000	-
Cl.29.2 of IS 302-1:2008(Clearances, Creepage Distances and Solid Insulation : Creepage distance )	-	1000	-
Cl.29.1 of IS 302-1:2008(Clearances, Creepage Distances and Solid Insulation : Clearance distance )	-	1000	-
Cl.28 of IS 302-2-21:2018(Screws & Connections)	-	1000	-
Cl.27.5 of IS 302-1:2008(Provision for Earthing : ECR )	-	1000	-
Cl.27 of IS 302-2-21:2018(Provision for Earthing)	-	1000	-
Cl.26 of IS 302-2-21: 2018(Terminals for External Conductors)	-	1000	-
Cl.25.18 of IS 302-1:2008(Supply Connection & External Flexible Cords)	-	1000	-
Cl.25.15 of IS 302-1:2008(Supply Connection & External Flexible Cords : Cord grip test - displacement )	-	1000	-
Cl.25.15 of IS 302-1:2008(Supply Connection & External Flexible Cords : Cord grip test )	-	1000	-
Cl.25.12 of IS 302-1:2008(Supply Connection & External Flexible Cords : Moulding of supply cord )	-	1000	-
Cl.25.10 of IS 302-1:2008(Supply Connection & External Flexible Cords : Colour of Earthing conductor )	-	1000	-
Cl.25.8 of IS 302-2-21:2018(Supply Connection & External Flexible Cords : Resistance of supply cord )	-	1000	-
Cl.25.5 of IS 302-1:2008(Supply Connection & External Flexible Cords : Type of attachment )	-	1000	-
Cl.25 of IS 302-2-21:2018(Supply Connection & External Flexible Cords : connection to the supply mains)	-	1000	-
Cl.24.102 of IS 302-221:2018(Component : Operation of thermal cut-out )	-	1000	-
Cl.24.101 of IS302-221:2018(Component : Location of non self reseting thermal cut out )	-	1000	-
Cl.24of IS 302-221:2018(Component : Relevent Indian standards )	-	1000	-
Cl. 23 of IS 302-1:2008(Internal Wiring : color identification for earthing conductor )	-	1000	-
Cl. 23 of IS 302-1:2008(Internal Wiring )	-	1000	-
Cl.22.111 of IS 302-2-21:2018(Construction : Resistance to vacuum )	-	1000	-
Cl.22.110 of IS 302-2-21:2018(Construction : meterial of connections )	-	1000	-
Cl.22.110 of IS 302-2-21:2018(Construction : Material of Inner conatiner )	-	1000	-
Cl.22.109 of IS 302-2-21:2018(Construction : Drain for appliance having a capacity of more than 15 liter)	-	1000	-
Cl.22.108 of IS 302-2-21:2018(Construction : fixing to wall )	-	1000	-
Cl.22.107 of IS 302-2-21:2018(Construction : Position of Heating elements and thermal control sensor)	-	1000	-
Cl.22.106 of IS 302-2-21:2018(Construction : Operation of thermal cut- out )	-	1000	-
Cl.22.104 of IS 302-2-21:2018(Construction : Outlet of open outlet heater )	-	1000	-
Cl.22.103 of IS 302-2-21:2018(Construction : Operation of Pressure relieve devices )	-	1000	-
Cl.22.102 of IS 302-2-21:2018(Construction : repeated drawing of water temp )	-	1000	-
Cl.22.101 of IS 302-2-21:2018(Construction : rated pressure of closed water heater )	-	1000	-
Cl.22.47 of IS 302-2-21:2018 (Construction : Water pressure test )	-	1000	-
Cl.22.44 of IS 302-1:2008(Construction : Shape and decoration of enclosure)	-	1000	-
Cl.22.34, Cl 22.35 of IS 302-1:2008(Construction : Shaft of operating Knobs )	-	1000	-
Cl.22.33 of IS 302-1:2008(Construction : Direct contact of liquids )	-	1000	-
Cl 22.26 ,Cl.22.28, Cl 22.29, Cl 22.30 , Cl 22.31, Cl 22.32 of IS 302-1:2008(Construction : Supplymentry/ double / reinforced insulation for Class II/ Class III appliance )	-	1000	-
Cl.22.18 Of IS 302-1:2008(Construction : Resistance to corrosion )	-	1000	-
Cl.22.17 of IS 302-1:2008(Construction : Spacers )	-	1000	-
Cl.22.14 of IS 302-1:2008(Construction : ragged or sharp edges)	-	1000	-
Cl.22.12 of IS 302-1:2008(Construction : Fixing of Handle, knob, grips, levers and similar parts)	-	1000	-
Cl.22.11 of IS 302-1:2008(Construction : Fixing of non detachable part )	-	1000	-
Cl.22.7 of IS 302-1:2008(Construction: adequate safeguards against the risk of excessive pressure)	-	1000	-
Cl.22.6 of IS 302-2-21:2018(Construction : Size of drain hole )	-	1000	-
Cl.22.6 of IS 302-1:2008(Construction : Effect of water on 3 insulation )	-	1000	-
Cl.22.2 of IS 302-1:2008(Construction : Provision to ensure all pole disconnection )	-	1000	-
Cl.22.1 of IS 302-1:2008(Construction : IP test )	-	1000	-
Cl.21.2 of IS 302-1:2008(Mechanical strength : prevent penetration by sharp implements. )	-	1000	-
Cl.21.1 of IS 302-1:2008(Mechanical strength : Rough handling in normal use)	-	1000	-
Cl.20 of IS 302-1:2008(Stability & Mechanical Hazards)	-	1000	-
Cl.19 of IS 302-2-21:2018(Abnormal Operation : leakage from container during test)	-	1000	-
Cl.19 of IS 302-2-21:2018(Abnormal Operation : High Voltage )	-	1000	-
Cl.19 of IS 302-2-21:2018(Abnormal Operation : Insulation of the supply cable or cord)	-	1000	-
Cl.19 of IS 302-2-21:2018(Abnormal Operation : Wall ceiling temp. of test corner )	-	1000	-
Cl.19 of IS 302-2-21:2018(Abnormal Operation : emission of flame or molten metal or poisonous or ignitable gas )	-	1000	-
Cl.16 of IS 302-2-21-2018(Leakage current and Electric strength (After humidity): Electric Strentgh )	-	2000	-
Cl.16 of IS 302-2-21-2018(Leakage current and Electric strength (After humidity): Leakage current )	-	2000	-
Cl.15 of IS 302-2-21-2018(Moisture Resistance)	-	2000	-
Cl.14 of IS 302-2-21:2018(Transient Over Voltages)	-	1000	-
Cl.13 of IS 302-2-21:2018(3 Strength at Operating Temperature)	-	1000	-
Cl.13 of IS 302-2-21:2018(Leakage Current )	-	1000	-
Cl.11 of 302-2-21:2018(Heating : Room Temp.)	-	1000	-
Cl.11 of 302-2-21:2018(Heating : Temp of Rubber or PVC insulation of internal and external wiring)	-	1000	-
Cl.11 of 302-2-21:2018(Heating : Temp of Walls, ceilings and floor of the test corner )	-	1000	-
Cl.10 of IS 302-2-21: 2018(Power Input & Current)	-	1000	-
Cl.8 of IS 302-2-21:2018(Protection Against Access to Live Parts)	-	1000	-
7.101(Marking : Indifiction of water inlet and water outlet )	-	1000	-
7.14(Marking : Legibility and durability)	-	1000	-
7.13(Marking : Official language of Instruction )	-	1000	-
7.11(Marking : Indication of controls )	-	1000	-
7.8(Marking : Terminals )	-	1000	-
7.6(Marking : Symbol used )	-	1000	-
7.1(Marking : Warning for Open- outlet )	-	1000	-
7.1(Marking : Statement for pressure reducing valve ( For rated pressure less than 0.6 MPa))	-	1000	-
7.1(Marking : Statement for a pressure-relief device)	-	1000	-
7.1(Marking : Rated capacity)	-	1000	-
7.1(Marking : Rated pressure)	-	1000	-
7.1(Marking : Country of manufacture)	-	1000	-
7.1(Marking: IP Number)	-	1000	-
7.1(Marking: Symbol for Class II)	-	1000	-
7.1(Marking: Model or type reference)	-	1000	-
7.1(Marking: Name, trademark or identification mark of manufacturer )	-	1000	-
7.1(Marking : Rated power input)	-	1000	-
7.1(Marking : Symbol for nature of supply )	-	1000	-
7.1(Marking : Rated Voltage )	-	1000	-
Cl.32 of IS 302-1:2008()	-	1000	-
4(GENERAL REQUIREMENT)	-	1000	-
5(GENERAL CONDITIONS FOR THE TESTS)	-	1000	-
12(THERMOSTAT SETTING)	-	1000	-
Cl-10(Mounting of the water heater)	-	1000	-
Cl-11(Measurements of stored water temperature)	-	1000	-
Cl-12(Thermostat setting)	-	1000	-
Cl-13(Measurement of energy consumption)	-	1000	-
Cl-14(Verification of the rated capacity)	-	1000	-
(Cl.22 of IS 302-2-21:2018)(Constructions)	-	1000	-
(Cl.22 of IS 302-2-21:2018)(Constructions)	-	1000	-
(Cl.22.108 of IS 302-2-21:2018)(Constructions)	-	1000	-
(Cl.22.6 of IS 302-2-21:2018)(Constructions)	-	1000	-
(Cl.22.47 of IS 302-2-21:2018)(Constructions)	-	1000	-
(Cl.22.47 of IS 302-2-21:2018)(Constructions)	-	1000	-
(Cl.22.47 of IS 302-2-21:2018)(Constructions)	-	1000	-
(Cl.22.47 of IS 302-2-21:2018)(Constructions)	-	1000	-
(Cl.22.47 of IS 302-2-21:2018)(Constructions)	-	1000	-
(Cl.22.101 of IS 302-2-21:2018)(Constructions)	-	1000	-
(Cl.22.105 of IS 302-2-21:2018)(Constructions)	-	1000	-
(Cl.22.101 of IS 302-2-21:2018)(Constructions)	-	1000	-
(Cl.22.103 of IS 302-2-21:2018)(Constructions)	-	1000	-
(Cl.22.104 of IS 302-2-21:2018)(Constructions)	-	1000	-
(Cl.22.104 of IS 302-2-21:2018)(Constructions)	-	1000	-
(Cl.22.105 of IS 302-2-21:2018)(Constructions)	-	1000	-
(Cl.22.109 of IS 302-2-21:2018)(Constructions)	-	1000	-
(Cl.24.101 of IS 302-2-21:2018)(Components)	-	1000	-
(Cl.25 of IS 302-2-21:2018)(Supply Connection and External Flexible cords)	-	1000	-
19.11.4.1(Electrostatic discharges)	-	0	-
19.11.4.2(Radiated fields)	-	0	-
19.11.4.3(Fast transient bursts)	-	0	-
19.11.4.4(Surge Immunity Test)	-	0	-
19.11.4.5(Immunity to conductivity Discharge)	-	0	-
19.11.4.6(Class 3 voltage dips and interruptions)	-	0	-
19.11.4.7(Hormonics)	-	0	-

31 Oct, 2028

-
Cl. 19.11.4.1 to Cl. 19.11.4.7 (EMI/EMC), Cl. 24, Cl. 32.2, Cl. 15.1.1(IPX7-8), Cl 12 as per IS 302-2-21

3556

URS PRODUCTS AND TESTING PVT LTD (F3), NOIDA

8136826

IS 18663 (2024)

Note Sorting Machines- Specifications

90000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 4.2 Safety requirements (Cl 4.1 and subclauses of IS/IEC 62368-1)(General Requirements)	-	2000	-
Cl 4.2 Safety requirements (Cl 4.2 and subclauses of IS/IEC 62368-1)(Energy source classifications)	-	2000	-
Cl 4.2 Safety requirements (Cl 4.3 and subclauses of IS/IEC 62368-1)(Protection against energy sources)	-	2000	-
Cl 4.2 Safety requirements (Cl 4.4 and subclauses of IS/IEC 62368-1)(Safeguards)	-	2000	-
Cl 4.2 Safety requirements (Cl 4.5 and subclauses of IS/IEC 62368-1)("Explosion- Requirements ")	-	2000	-
Cl 4.2 Safety requirements (Cl 4.6 and subclauses of IS/IEC 62368-1)(Fixing of conductors- Requirements)	-	2000	-
Cl 4.2 Safety requirements (Cl 4.7 and subclauses of IS/IEC 62368-1)(Equipment for direct insertion into mains socket-outlets)	-	2000	-
Cl 4.2 Safety requirements (Cl 4.8 and subclausesof IS/IEC 62368-1)(Equipment containing coin / button cell batteries)	-	2000	-
Cl 4.2 Safety requirements (Cl 4.9 and subclauses of IS/IEC 62368-1)(Likelihood of fire or shock due to entry of conductive objects)	-	2000	-
Cl 4.2 Safety requirements (Cl 4.10 and subclauses of IS/IEC 62368-1)(Components requirements)	-	2000	-
Cl 4.2 Safety requirements (Cl 5.2 and subclauses of IS/IEC 62368-1)(Classification and limits of electrical energy sources)	-	2000	-
Cl 4.2 Safety requirements (Cl 5.3 and subclauses of IS/IEC 62368-1)(Protection against electrical energy sources)	-	2000	-
Cl 4.2 Safety requirements (Cl 5.4 and subclauses of IS/IEC 62368-1)(Insulation materials and requirements)	-	2000	-
Cl 4.2 Safety requirements (Cl 5.5 and subclauses of IS/IEC 62368-1)(Components as safeguards)	-	2000	-
Cl 4.2 Safety requirements (Cl 5.6 and subclauses of IS/IEC 62368-1)(Protective conductor)	-	2000	-
Cl 4.2 Safety requirements (Cl 5.7 and subclauses of IS/IEC 62368-1)(Prospective touch voltage, touch current and protective conductor current.)	-	2000	-
Cl 4.2 Safety requirements (Cl 5.8 and subclauses of IS/IEC 62368-1)(Backfeed safeguard in battery backed up supplies)	-	2000	-
Cl 4.2 Safety requirements (Cl 6.1 of IS/IEC 62368-1)(Electrically-caused fire)	-	2000	-
Cl 4.2 Safety requirements (Cl 6.2 and subclauses of IS/IEC 62368-1)(Classification of power sources (PS) and potential ignition sources (PIS).)	-	2000	-
Cl 4.2 Safety requirements (Cl 6.3 and subclauses of IS/IEC 62368-1)(Safeguards against fire under normal operating conditions and abnormal operating conditions)	-	2000	-
Cl 4.2 Safety requirements (Cl 6.4 and subclauses of IS/IEC 62368-1)(Safeguards against fire under single fault conditions)	-	2000	-
Cl 4.2 Safety requirements (Cl 6.5 and subclauses of IS/IEC 62368-1)(Internal and external wiring)	-	2000	-
Cl 4.2 Safety requirements (Cl 6.6 and subclauses of IS/IEC 62368-1)(Safeguards against fire due to the connection of additional equipment)	-	2000	-
Cl 4.2 Safety requirements (Cl 7, 7.1 to 7.6 and subclauses of IS/IEC 62368-1)(Injury caused by hazardous substances)	-	2000	-
Cl 4.2 Safety requirements (Cl 8, 8.1 to 8.12 and subclauses of IS/IEC 62368-1)(Mechanically-caused injury)	-	2000	-
Cl 4.2 Safety requirements (Cl 9, 9.1 to 9.6 and subclauses of IS/IEC 62368-1)(Thermal burn injury)	-	2000	-
Cl 4.2 Safety requirements (Annex.B, B.1 to B.4 including its subclauses of IS/IEC 62368-1))(Normal operating condition tests, abnormal operating condition tests and single fault condition tests)	-	2000	-
Cl 4.2 Safety requirements (Annex. D, D.1, D.2, D.3 of IS/IEC 62368-1)(Test generators)	-	2000	-
Cl 4.2 Safety requirements ( Annex E, E.1, E.2, E.3 of IS/IEC 62368-1)(Test conditions for equipment containing audio amplifiers)	-	2000	-
Cl 4.2 Safety requirements ( Annex. F, F.1 to F.5 including its subclauses of IS/IEC 62368-1)(Equipment markings, instructions, and instructional safeguards)	-	2000	-
Cl 4.2 Safety requirements ( Annex. G, G.1 to G.16 including its subclauses of IS/IEC 62368-1)(Components)	-	2000	-
Cl 4.2 Safety requirements ( Annex. H, H1 to H3 including its subclauses of IS/IEC 62368-1)(Criteria for telephone ringing signals .)	-	2000	-
Cl 4.2 Safety requirements ( Annex I of IS/IEC 62368-1)(Overvoltage categories)	-	2000	-
Cl 4.2 Safety requirements ( Annex. J, J.1 to J.3 including its subclauses of IS/IEC 62368-1)(Insulated winding wires for use without interleaved insulation)	-	2000	-
Cl 4.2 Safety requirements ( Annex. K, K.1 to K.7 including its subclauses of IS/IEC 62368-1)(Safety Interlocks)	-	2000	-
Cl 4.2 Safety requirements ( Annex. L .L1 to L.9 including its subclauses of IS/IEC 62368-1)(Disconnect devices)	-	2000	-
Cl 4.2 Safety requirements ( Annex. M, M.1 to M.10 including its subclauses of IS/IEC 62368-1)(Equipment containing batteries and their protection circuits)	-	2000	-
Cl 4.2 Safety requirements ( Annex.N of IS/IEC 62368-1)(Electrochemical potentials)	-	2000	-
Cl 4.2 Safety requirements ( Annex.O of IS/IEC 62368-1)(Measurement of creepage distances and clearances)	-	2000	-
Cl 4.2 Safety requirements ( Annex.P, P.1 to P.4 and its subclauses of IS/IEC 62368-1)(Safeguards against conductive objects)	-	2000	-
Cl 4.2 Safety requirements ( Annex.Q, Q.1 to Q.2 and its subclauses of IS/IEC 62368-1)(Circuits intended for interconnection with building wiring)	-	2000	-
Cl 4.2 Safety requirements ( Annex.R, R.1 to R.4 and its subclauses of IS/IEC 62368-1)(Limited short-circuit test)	-	2000	-
Cl 4.2 Safety requirements ( Annex.S S.1 to S.5 and its subclauses of IS/IEC 62368-1)(Tests for resistance to heat and fire)	-	2000	-
Cl 4.2 Safety requirements ( Annex T, T.1 to T.11 and its subclauses of IS/IEC 62368-1)(Mechanical strength tests)	-	2000	-
Cl 4.2 Safety requirements ( Annex U, U.1 to U.3 and its subclauses of IS/IEC 62368-1)(Mechanical strength of CRTs and protection against the effects of implosion)	-	2000	-
Cl 4.2 Safety requirements ( Annex V, V.1 to V.2 and its subclauses of IS/IEC 62368-1)(Determination of accessible parts)	-	2000	-
Cl 4.2 Safety requirements ( Annex X of IS/IEC 62368-1)(Alternative method for determining clearances for insulation in circuits connected to an AC mains not exceeding 420V peak (300V rms))	-	2000	-
Cl 4.2 Safety requirements ( Annex Y , Y.1 to Y.6 and its subclauses of IS/IEC 62368-1)(Construction requirements for outdoor enclosure)	-	2000	-
Cl-6.1, Table-4 (i)(Marking and instructions)	-	2000	-
Cl-6.1, Table-4 (ii)(Protection against access to live parts)	-	2000	-
Cl-6.1, Table-4 (iii)(Power input and current)	-	2000	-
Cl-6.1, Table-4 (iv)(Heating)	-	2000	-
Cl-6.1, Table-4 (v)(Creepage clearance and solid insulation)	-	2000	-
Cl-6.1, Table-4 (vi)(Humidity conditioning)	-	2000	-
Cl-6.1, Table-4 (vii)(Leakage current and electric strength at operating temperature)	-	2000	-
Cl-6.1, Table-4 (viii)(Provision for earthing)	-	2000	-

31 Dec, 2026

-
Included w.e.f.29.05.2025 For safty requirments only.

3557

Alpha Test House Private Limited, Delhi

8131026

IS 302 : Part 2 : Sec 15 (2009)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 15 appliances for heating liquids (First Revision)

14500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.0(Classification)	-	250	-
7(Marking and instructions)	-	250	-
8(Protection against live parts)	-	500	-
9(STARTING OF MOTOR-OPERATED APPLIANCES)	-	0	-
10(POWER INPUT AND CURRENT)	-	1000	-
11(HEATING)	-	1000	-
13(LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE)	-	1000	-
14(TRANSIENT OVERVOLTAGES)	-	1000	-
15(MOISTURE RESISTANCE)	-	1000	-
16(LEAKAGE CURRENT AND ELECTRIC STRENGTH)	-	1000	-
17(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	500	-
18(ENDURANCE)	-	0	-
19(ABNORMAL OPERATION)	-	1000	-
20(STABILITY AND MECHANICAL HAZARDS)	-	500	-
21(MECHANICAL STRENGTH)	-	500	-
22(CONSTRUCTION)	-	500	-
23(INTERNAL WIRING)	-	500	-
24(COMPONENTS)	-	500	-
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CORDS)	-	500	-
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	500	-
27(PROVISION FOR EARTHING)	-	500	-
28(SCREWS AND CONNECTIONS)	-	500	-
29(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION)	-	500	-
30(RESISTANCE TO HEAT AND FIRE)	-	500	-
31(RESISTANCE TO RUSTING)	-	500	-
32(RADIATION, TOXICITY AND SIMILAR HAZARDS)	-	0	-
22.16(Automatic cord reel)	-	0	-
22.32(Oxygen bomb for rubber material)	-	0	-
22.47(Water pressure inlet)	-	0	-
22.106(Interlocks)	-	0	-
22.3(Flexing test)	-	0	-
24(Components)	-	0	-
19.11.4.1(Electrostatic discharges)	-	0	-
19.11.4.2(Radiated fields)	-	0	-
19.11.4.3(Fast transient bursts)	-	0	-
19.11.4.4(Surge immunity test)	-	0	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	0	-
19.11.4.7(Harmonics)	-	0	-
4(General requirements)	-	0	-
5(General Conditions of tests)	-	0	-
19.11.4.5(Immunity to conducted discharges)	-	0	-
6(Classification- IS 302-1)	-	0	-
6(Classification- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-2-15)	-	0	-
7.3(Marking- IS 302-1)	-	0	-
7.4(Marking- IS 302-1)	-	0	-
7.5(Marking- IS 302-1)	-	0	-
7.6(Marking- IS 302-1)	-	0	-
7.7(Marking- IS 302-1)	-	0	-
7.8(Marking- IS 302-1)	-	0	-
6(Classification- IS 302-1)	-	0	-
6(Classification- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
Marking- IS 302-1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-2-15)	-	0	-
7.3(Marking- IS 302-1)	-	0	-
7.4(Marking- IS 302-1)	-	0	-
7.5(Marking- IS 302-1)	-	0	-
7.6(Marking- IS 302-1)	-	0	-
7.7(Marking- IS 302-1)	-	0	-
7.8(Marking- IS 302-1)	-	0	-
7.9(Marking- IS 302-1)	-	0	-
7.1O(Marking- IS 302-1)	-	0	-
7.11(Marking- IS 302-1)	-	0	-
7.12(Marking- IS 302-2-15)	-	0	-
7.12(Marking- IS 302-1)	-	0	-
7.12.1(Marking- IS 302-1)	-	0	-
7.12.3(Marking- IS 302-1)	-	0	-
7.12.5(Marking- IS 302-1)	-	0	-
7.12.6(Marking- IS 302-1)	-	0	-
7.13(Marking- IS 302-1)	-	0	-
7.14(Marking- IS 302-1)	-	0	-
7.15(Marking- IS 302-1)	-	0	-
7.101(Marking- IS 302-2-15)	-	0	-
8(Protection Against Electric Shock, IS 302-1)	-	0	-
10(Power Input and Current, IS 302-1)	-	0	-
11(Heating, IS 302-1)	-	0	-
11(Heating, IS 302-1)	-	0	-
11(Heating, IS 302-1)	-	0	-
11(Heating, IS 302-1)	-	0	-
13(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	0	-
13(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	0	-
15.1(Moisture Resistance, IS 302-1)	-	0	-
15.2(Spillage test as 15.2, IS 3.02-1 & 302-2-15)	-	0	-
16(Leakage current as per Cl 16, IS 302-1)	-	0	-
16(electric strength as per Cl 16, IS 302-1)	-	0	-
17(Overload protection of Transformers and Associated Circuits, IS 302-1)	-	0	-
19.13(Abnormal Operation as per Cl 19, IS 302-2-15)	-	0	-
19.13(Abnormal Operation as per Cl 19, IS 302-1)	-	0	-
19.13(Abnormal Operation as per Cl 19, IS 302-1)	-	0	-
19.13(Abnormal Operation as per Cl 19, IS 302-1)	-	0	-
20.1(Stability & Mechanical Hazards, IS 302-1)	-	0	-
21.1(Mechanical Strength, IS 302-1)	-	0	-
21.2(Mechanical Strength, IS 302-1)	-	0	-
22.1(Construction, IS 302-1)	-	0	-
22.7(Construction as per Cl 22.7, IS 3.02-2-15)	-	0	-
22.107(Construction as per Cl 22.7, IS 3.02-2-15)	-	0	-
22.108(Construction as per Cl 22.8, IS 3.02-2-15)	-	0	-
23.1(Internal Wiring, IS 302-1)	-	0	-
23.2(Internal Wiring, IS 302-1)	-	0	-
23.4(Internal Wiring, IS 302-1)	-	0	-
23.5(Internal Wiring, IS 302-1)	-	0	-
23.6(Internal Wiring, IS 302-1)	-	0	-
23.7(Internal Wiring, IS 302-1)	-	0	-
23.8(Internal Wiring, IS 302-1)	-	0	-
23.9(Internal Wiring, IS 302-1)	-	0	-
23.1O(Internal Wiring, IS 302-1)	-	0	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.2(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.5(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.6(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.9(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.11(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.12(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.13(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.16(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.17(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.18(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.19(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.2(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.21(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.22(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
26(Terminals for External Conductors, IS 302-1)	-	0	-
27.1(Provision for Earthing, IS 302-1)	-	0	-
27.2(Provision for Earthing, IS 302-1)	-	0	-
27.3(Provision for Earthing, IS 302-1)	-	0	-
27.4(Provision for Earthing, IS 302-1)	-	0	-
27.5(Provision for Earthing, IS 302-1)	-	0	-
28(Screws & Connections, IS 302-1)	-	0	-
29.1(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	0	-
29.2(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	0	-
30.1(Resistance to Heat and Fire, IS 302-1)	-	0	-
30.2(Resistance to Heat and Fire, IS 302-1)	-	0	-
31(Resistance of Rusting, IS 302-1)	-	0	-

17 May, 2027

-
Included w.e.f 30.06.2025 Exclusion: Cl 19 (ABNORMAL OPERATION), Cl 24 (COMPONENTS)

3558

Sleen India Biz venture Private Limited, Agra

9139736

IS 1341 (2018)

Steel Butt Hinges - Specification (Sixth Revision)

All Type/Size

8200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3 Tables 2 to 9(Types)	-	200	-
5.1 Tables 2 to 9 (2)(Size of Hinge)	-	200	-
5.1 Tables 2 to 9 (3)(Length A)	-	200	-
5.1 Tables 2 to 9 (4)(Breadth B)	-	200	-
5.1 Tables 2 to 9 (4)(Breadth B1)	-	200	-
5.1 Tables 2 to 9 (4)(Breadth B2)	-	200	-
5.1 Tables 2 to 9 (5)(Thickness of Flap C)	-	200	-
5.1 Tables 2 to 9 (6)(Diameter of Hinge Pin D)	-	200	-
5.1 Tables 2 to 9 (7)(Number of Knuckles)	-	200	-
5.1 Tables 2 to 9 (8)(Number of Screw Holes)	-	200	-
5.1 Tables 2 to 9 (9)(Holes for Screw No.)	-	200	-
6.1(General)	-	200	-
6.1(General)	-	200	-
6.1(General)	-	200	-
6.2.1(Knuckles)	-	200	-
6.3(Pins)	-	200	-
6.4(Screw Holes)	-	200	-
6.4.2(Position of Holes)	-	200	-
6.4.2(X)	-	200	-
6.4.2(Y)	-	200	-
6.4.2(Z)	-	200	-
6.4.2.1(Position of Holes)	-	200	-
7(Finish)	-	200	-
TABLE-1 (Clause-4)(TITANIUM)	-	400	-
TABLE-1 (Clause-4)(VANADIUM)	-	400	-
TABLE-1 (Clause-4)(NIOBIUM)	-	400	-
TABLE-1 (Clause-4)(Molybdenum)	-	400	-
TABLE-1 (Clause-4)(Chromium)	-	400	-
TABLE-1 (Clause-4)(Nickel)	-	400	-
TABLE-1 (Clause-4)( ALUMINIUM)	-	400	-
TABLE-1 (Clause-4)(SILICON)	-	400	-
TABLE-1 (Clause-4)(NITROGEN)	-	1000	-
TABLE-1 (Clause-4)(MANGANESE)	-	400	-
TABLE-1 (Clause-4)(PHOSPHURS)	-	400	-
TABLE-1 (Clause-4)(SULPHUR)	-	400	-
TABLE-1 (Clause-4)( CARBON)	-	400	-
Clause 4 Table 1(Manganese ( Pin))	-	400	-
Clause 4 Table 1(Phosphorus ( Pin))	-	400	-
Clause 4 Table 1(Sulphur ( Pin))	-	400	-
Clause 4 Table 1(Carbon ( Pin))	-	400	-
Clause 4 Table 1(Nitrogen ( Flap))	-	1000	-
Clause 4 Table 1(Manganese ( Flap))	-	400	-
Clause 4 Table 1(Phosphorus ( Flap))	-	400	-
Clause 4 Table 1(Sulphur ( Flap))	-	400	-
Clause 4 Table 1(Carbon ( Flap))	-	400	-
8(Marking)	-	200	-
Cl 4 & Table 1(Sulphur- IS 228(Part 9))	-	400	-
Cl 4 & Table 1(Carbon- IS 228(Part 1))	-	400	-
Cl 4 & Table 1(Phosphorous- IS 228(Part 3))	-	400	-
Cl 4 & Table 1(Manganese- IS 228(Part 2))	-	400	-
Cl 4 & Table 1(Silicon- IS 228(Part 2))	-	400	-
Cl 4 & Table 1(Nitrogen -IS 228(Part 19))	-	1000	-

15 May, 2027

-
Included w.e.f 08.05.2025

3559

Ace Test Labs & Metrology Pvt. Ltd., Sonipat

9162826

IS 302 : Part 2 : Sec 11 (1994)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 11 tumbler dryers

22000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(GENERAL REQUIREMENT)	-	1000	-
4(GENERAL NOTES ON TESTS)	-	1000	-
5(RATING)	-	1000	-
6(CLASSIFICATION)	-	1000	-
7(MARKING)	-	1000	-
8(PROTECTION AGAINST ELECTRIC SHOCK)	-	2000	-
9(STARTING OF MOTOR-OPERATED APPLIANCES)	-	4000	-
10(INPUT AND CURRENT)	-	2000	-
11(HEATING)	-	5000	-
12(OPERATION TJNDER OVERLOAD CONDITIONS OF APPLIANCES WITH HEATING ELEMENTS)	-	1000	-
13(ELECTRICAL INSULATION AND LEAKAGE CURRENT AT OPERATING TEMPERATURE)	-	1000	-
14(RADIO AND TELEVISION INTERFERENCE SUPPRESSION)	-	1000	-
15(MOISTURE RESISTANCE)	-	5000	-
16(INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-	2000	-
17(OVERLOAD PROTECTION)	-	2000	-
18(ENDURANCE )	-	4000	-
19(ABNORMAL OPERATION)	-	5000	-
20(STABILITY AND MECHANICAL HAZARDS)	-	2000	-
21(MECHANICAL STRENGTH)	-	2000	-
22(CONSTRUCTION)	-	2000	-
23(INTERNAL WIRING)	-	1000	-
24(COMPONENTS)	-	2000	-
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CABLES AND CORDS)	-	2000	-
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	2000	-
27(PROVISION FOR EARTHING)	-	2000	-
28(SCREWS AND CONNECTIONS)	-	1000	-
29(CREEPAGE DISTANCES, CLEARANCES AND DISTANCES THROUGH INSULATION)	-	4000	-
30(RESISTANCE TO HEAT, FIRE AND TACKING)	-	2000	-
31(RESISTANCE TO RUSTING)	-	3000	-
32(RADIATION, TOXICITY AND SIMILAR HAZARDS)	-	4000	-
101.1(Type Tests)	-	22000	-
101.2(Acceptance Tests)	-	22000	-
101.3(Routine Tests)	-	10000	-
3(GENERAL REQUIREMENT)	-	1000	-
4(GENERAL NOTES ON TESTS)	-	4000	-
5(RATING)	-	2000	-
6(CLASSIFICATION)	-	2000	-
7(MARKING)	-	2000	-
8(PROTECTION AGAINST ELECTRIC SHOCK)	-	4000	-
9(STARTING OF MOTOR-OPERATED APPLIANCES)	-	3000	-
10(INPUT AND CURRENT)	-	4000	-
11(HEATING)	-	12000	-
12(OPERATION TJNDER OVERLOAD CONDITIONS OF APPLIANCES WITH HEATING ELEMENTS)	-	4000	-
13(ELECTRICAL INSULATION AND LEAKAGE CURRENT AT OPERATING TEMPERATURE)	-	2000	-
14(RADIO AND TELEVISION INTERFERENCE SUPPRESSION)	-	3000	-
15(MOISTURE RESISTANCE)	-	5000	-
16(INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-	5000	-
17(OVERLOAD PROTECTION)	-	5000	-
18(ENDURANCE )	-	5000	-
19(ABNORMAL OPERATION)	-	4000	-
20(STABILITY AND MECHANICAL HAZARDS)	-	4000	-
21(MECHANICAL STRENGTH)	-	4000	-
22(CONSTRUCTION)	-	4000	-
23(INTERNAL WIRING)	-	4000	-
24(COMPONENTS)	-	4000	-
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CABLES AND CORDS)	-	5000	-
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	5000	-
27(PROVISION FOR EARTHING)	-	5000	-
28(SCREWS AND CONNECTIONS)	-	5000	-
29(CREEPAGE DISTANCES, CLEARANCES AND DISTANCES THROUGH INSULATION)	-	6000	-
30(RESISTANCE TO HEAT, FIRE AND TACKING)	-	8000	-
31(RESISTANCE TO RUSTING)	-	8000	-
32(RADIATION, TOXICITY AND SIMILAR HAZARDS)	-	10000	-
101.1(Type Tests)	-	12000	-
101.2(Acceptance Tests)	-	22000	-
101.3(Routine Tests)	-	2500	-

14 Nov, 2027

-
Included w.e.f 04.07.2025 Exclusion: Cl 19.11.4.1-19.11.4.7(EMI/EMC)

3560

DELHI TEST HOUSE (50) KUNDLI SONIPAT

9127026

IS 12933 : Part 2 (2003)

Solar flat plate collector - Specification: Part 2 components (Second Revision)

4000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
12.1.1(Thermal Shock Test)	-	500	-
11(MATERIALS)	-	200	-
10(BACK AND SIDE INSULATION)	-	500	-
9.2.2(Bonding Between Riser and Sheet)	-	500	-
9.2.1(Static Pressure Leakage Test)	-	500	-
9.1.4(Temperature Test)	-	500	-
8(FABRICATION)	-	300	-
7(WORKMANSHIP AND FINISH)	-	500	-
5.1(Transmittance Test)	-	500	-
12.1.1(Thermal Shock Test)	-	500	-
11(MATERIALS)	-	200	-
10(BACK AND SIDE INSULATION)	-	500	-
9.2.2(Bonding Between Riser and Sheet)	-	500	-
9.2.1(Static Pressure Leakage Test)	-	500	-
9.1.4(Temperature Test)	-	500	-
8(FABRICATION)	-	300	-
7(WORKMANSHIP AND FINISH)	-	500	-
5.1(Transmittance Test)	-	500	-

23 Jun, 2028

-
Included w.e.f.31.07.2025

3561

Sleen India Biz venture Private Limited, Agra

9139736

IS 12817 (2020)

Stainless Steel Butt Hinges - Specification ( Third Revision )

All Size/Type

14800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.2, Table 1 to 6(Length , A -IS 12817)	-	200	-
6.2, Table 1 to 6(Breadth, B-IS 12817)	-	200	-
6.2, Table 1 to 6(Breadth, B1-IS 12817)	-	0	Test price for breadth measurement is 200/-.
6.2, Table 1 to 6(Breadth, B2-IS 12817)	-	0	Test price for breadth measurement is 200/-.
6.2, Table 1 to 6(Thickness of flap, C-IS 12817)	-	200	-
6.2, Table 1 to 6(Dia. of Hinge pin, D-IS 12817 )	-	200	-
6.2, Table 1 to 6(Number of Knuckles- IS 12817 )	-	100	-
6.2, Table 1 to 6(Number of Screw Holes -IS 12817 )	-	100	-
6.2, Table 1 to 6(Holes for Screw Number- IS 12817 )	-	100	-
7.1(General - IS 12817 )	-	100	-
7.2(Knuckles - IS 12817 )	-	200	-
7.3(Pins- IS 12817 )	-	200	-
7.4(Screw Holes- IS 12817 )	-	200	-
7.4.2(Position of screw holes - IS 12817 )	-	200	-
7.4.2, Fig 1(The distance of the screw holes from the end of the flap - IS 12817 )	-	200	-
8.0(Finish - IS 12817 )	-	100	-
Clause 4.1.2(Silicon (Pin) )	-	300	-
Clause 4.1.2(Phosphorus (Pin) )	-	300	-
Clause 4.1.2(Sulphur (Pin) )	-	300	-
Clause 4.1.2(Manganese (Pin) )	-	300	-
Clause 4.1.2(Carbon (Pin) )	-	300	-
Clause 4.1.1(Silicon (Flap) )	-	300	-
Clause 4.1.1(Phosphorus (Flap) )	-	300	-
Clause 4.1.1(Sulphur (Flap) )	-	300	-
Clause 4.1.1(Manganese (Flap) )	-	300	-
Clause 4.1.1(Carbon (Flap) )	-	300	-
Clause 7.4.2 (Dimension - Z )	-	200	-
Clause 7.4.2 (Dimension - Y )	-	200	-
Clause 7.4.2 (Dimension - X )	-	200	-
Clause 7.4.1(Number of holes)	-	100	-
As per Cl.4(Carbon)	-	300	-
As per Cl.4(Sulphur)	-	300	-
As per Cl.4(Phosphorus)	-	300	-
As per Cl.4(Manganese)	-	300	-
As per Cl.4(Nitrogen)	-	2000	-
As per Cl.4(Silicon)	-	300	-
As per Cl.4(Aluminium)	-	300	-
As per Cl.4(Chromium)	-	300	-
As per Cl.4(Vanadium)	-	300	-
As per Cl.4(Molybdenum)	-	300	-
As per Cl.4(Niobium)	-	300	-
As per Cl.4(Nickel)	-	300	-
As per Cl.4(Copper)	-	300	-
As per Cl.4(Titanium)	-	300	-
As per Cl.4(Zirconium)	-	300	-
As per Cl.4(Tungsten)	-	300	-
As per Cl.4(Cerium)	-	300	-

15 May, 2027

-
Included w.e.f 10.07.2025

3562

QA TESTING LABORATORIES PRIVATE LIMITED, NOIDA

8169906

IS 1161 (2014)

Steel tubes for structural purposes - Specification (Fifth Revision)

Y St 210, Y St 240, Y St 310 , Y St 355

5200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause - 5.1, Table-3( CARBON)	-	500	Testing facility available
Clause - 5.1, Table-3(MANGANESE)	-	500	Testing facility available
Clause - 5.1, Table-3(SULPHUR)	-	500	Testing facility available
Clause - 5.1, Table-3(PHOSPHURS)	-	500	Testing facility available
Cl 11.3.1(Cold bend test (upto & including 50 mm NB))	-	500	Testing facility available
3.1 & 6.1, 6.1.1 & 6.1.3 , Table 1(Outer Diameter - SOP MT-23)	-	500	Testing facility available
3.1 & 6.1, 6.1.1 & 6.1.3 , Table 1(Thickness - SOP MT-23)	-	500	Testing facility available
3.1 & 6.1, 6.1.1 & 6.1.3 , Table 1(Mass - SOP MT-23)	-	500	Testing facility available
Cl. 11.2 Table 2(Yield strength)	-	600	Testing facility available
Cl. 11.2 Table 2(Elongation)	-	600	Testing facility available
Cl 11.3.1(Cold bend test (upto & including 50 mm NB))	-	500	-
3.1 & 6.1, 6.1.1 & 6.1.3 , Table 1(Outer Diameter - SOP MT-23)	-	500	-
3.1 & 6.1, 6.1.1 & 6.1.3 , Table 1(Thickness - SOP MT-23)	-	500	-
3.1 & 6.1, 6.1.1 & 6.1.3 , Table 1(Mass - SOP MT-23)	-	500	-
Cl. 11.2 Table 2(Yield strength)	-	500	-
Cl. 11.2 Table 2(Elongation)	-	500	-
Cl 11.3.1(Cold bend test (upto & including 50 mm NB))	-	500	-
3.1 & 6.1, 6.1.1 & 6.1.3 , Table 1(Outer Diameter - SOP MT-23)	-	500	-
3.1 & 6.1, 6.1.1 & 6.1.3 , Table 1(Thickness - SOP MT-23)	-	500	-
3.1 & 6.1, 6.1.1 & 6.1.3 , Table 1(Mass - SOP MT-23)	-	500	-
Cl. 11.2 Table 2(Yield strength)	-	500	-
Cl. 11.2 Table 2(Elongation)	-	500	-

05 Apr, 2028

-
Included w.e.f. 18.08.2025

3563

JBS TESTING SOLUTIONS PVT LTD (27), JALANDHAR

9164606

IS 14364 (2024)

Quaternary Ammonium Compound Based Surface Cleaner, Liquid ï¿½ Specification ( First Revision )

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4.1(Description)	-	25000	For complete testing
Cl-4.2(Composition)	-	25000	For complete testing
Cl-4.3(Odour)	-	25000	For complete testing
Cl-4.4(Colour)	-	25000	For complete testing
Cl-4.5(Stability on Dilution)	-	25000	For complete testing
Cl-4.6(Cleaning Property)	-	25000	For complete testing
Cl-4.7(Applicability)	-	25000	For complete testing
Cl-4.8(Keeping Quality)	-	25000	For complete testing
Cl-4.8 & 4.9, Table-1 (i)(Total non-volatile matter, percent by mass, Min)	-	25000	For complete testing
Cl-4.8 & 4.9, Table-1 (ii)(pH)	-	25000	For complete testing
Cl-4.8 & 4.9, Table-1 (iii)(QAC content, percent by mass, Min)	-	25000	For complete testing
Cl-6(Marking)	-	25000	For complete testing
Cl-4.1(Description)	-	-	-
Cl-4.2(Composition)	-	-	-
Cl-4.3(Odour)	-	-	-
Cl-4.4(Colour)	-	-	-
Cl-4.5(Stability on Dilution)	-	-	-
Cl-4.6(Cleaning Property)	-	-	-
Cl-4.7(Applicability)	-	-	-
Cl-4.8(Keeping Quality)	-	-	-
Cl-4.8 & 4.9, Table-1 (i)(Total non-volatile matter, percent by mass, Min)	-	-	-
Cl-4.8 & 4.9, Table-1 (ii)(pH)	-	-	-
Cl-4.8 & 4.9, Table-1 (iii)(QAC content, percent by mass, Min)	-	-	-
Cl-6(Marking)	-	-	-

04 Dec, 2028

-
Included w.e.f.21.05.2025

3564

ATCC TEST LABS LLP

8172626

IS 1554 : Part 1 (1988)

Specification for pvc insulated (Heavy Duty) electric cables: Part 1 for working voltages up to and including 1100 v (Third Revision)

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(MATERIALS : CONDUCTOR)	-	500	Rs. 10000/- for single core sheathed cable, Rs. 1000/- for each additional core, Rs. 3000/- for armoured cable, Rs. 5000/- for Category C1 and Rs.10000/- for Category C2
4.1.1(INSULATION : General Purjose Insulaiion)	-	500	-
4.1.2(INSULATION : Heat Resisting Insulation)	-	500	-
5.1(MATERIALS : FILLER AND INNER SHEATH)	-	500	-
5.2(MATERIALS : FILLER AND INNER SHEATH)	-	500	-
6.1(MATERIALS : ARMGURING)	-	500	-
6.2(MATERIALS : ARMGURING)	-	500	-
7.1.1(OUTER SHEATH : For Cables with General Purpose InsuIafion)	-	500	-
7.1.2(OUTER SHEATH : For Cables with Heat Resisting InsuIalion)	-	500	-
8.1(CONSTRUCTION : CONDUCTOR)	-	500	-
8.2(CONSTRUCTION : CONDUCTOR)	-	500	-
9.1(INSULATION )	-	500	-
9.2(INSULATION : Thickness of Insulation)	-	1000	-
9.3(INSULATION :Tolerance on Thickness of Insulation)	-	1000	-
9.4(INSULATION : Application of Insulation)	-	500	-
10.1(CORE IDENTIFICATION)	-	500	-
10.2(CORE IDENTIFICATION)	-	500	-
10.3(CORE IDENTIFICATION)	-	500	-
10.3.1(Arrangement of Marking)	-	500	-
11.1(LAYING UP OF CORES)	-	500	-
11.2(LAYING UP OF CORES)	-	500	-
12.1(INNER SHEATH)	-	500	-
12.2(INNER SHEATH)	-	500	-
12.3(INNER SHEATH :Thickness of Inner Sheath)	-	1000	-
12.3.1(INNER SHEATH :Thickness of Inner Sheath)	-	1000	-
13.1.1(ARMOURING : Application)	-	500	-
13.1.2(Armouring: Coverage )	-	1000	-
13.1.3(ARMOURING : Direction of lay )	-	500	-
13.1.4(ARMOURING : Application)	-	500	-
13.2(ARMOURING : Type of Armour)	-	500	-
13.2.1(ARMOURING : Type of Armour)	-	500	-
13.3(Armouring : Dimensions -Wire Diameter)	-	1000	-
13.3(Armouring : Dimensions -Formed wire )	-	1000	-
13.4(ARMOURING : Joints)	-	500	-
13.5.1(ARMOURING : Resistance)	-	1000	-
13.5.2(ARMOURING : Resistance)	-	1000	-
13.6 a)(ARMOURING: Tensile Strength)	-	1000	-
13.6 b)(ARMOURING: Elongation )	-	1000	-
13.6 c)(ARMOURING: Torsion Test (For round wire ) )	-	1000	-
13.6 d)(ARMOURING: Winding Test(For formed wire))	-	1000	-
13.6 e)(ARMOURING: Uniformity of zinc coating)	-	1000	-
13.6 f)(ARMOURING: Mass of zinc coating )	-	1000	-
13.6 g)(ARMOURING: Resistivity)	-	1000	-
14.1(OUTER SHEATH)	-	500	-
14.2(OUTER SHEATH)	-	500	-
14.3(OUTER SHEATH : Colour )	-	500	-
14.4.1(Thickness of Outer Sheath : Unarmowed Cables)	-	1000	-
14.4.2(Thickness of Outer Sheath : Armoured Cables)	-	1000	-
15.1 a) 1)(Tests on conductor : Annealing test ( for copper ))	-	1000	-
15.1 a) 2)(Tensile test (for aluminium) - Before stranding )	-	1000	-
15.1 a) 3)(Tests on conductor : Wrapping test ( for aluminium ))	-	1000	-
15.1 a) 4)(Tests on conductor : Conductor resistance test)	-	1000	-
15.1 a) 4)(Resistance test - Neutral conductor )	-	1000	-
15.1 d)1)(Phyaical tests for insulation : Tensile Test)	-	1000	-
15.1 d)1)(Phyaical tests for insulation : Elongation )	-	1000	-
15.1 d)1)(Physical tests for sheath : Tensile stregth )	-	1000	-
15.1 d)1)(Physical tests for sheath : Elongation )	-	1000	-
15.1 d)2)(Phyaical tests for insulation- Ageing in air Oven : Tensile Test)	-	2000	-
15.1 d)2)(Phyaical tests for insulation - Ageing in air oven : Elongation )	-	2000	-
15.1 d)2)(Phyaical tests for insulation - Ageing in air Oven : Tensile Variation )	-	2000	-
15.1 d)2)(Phyaical tests for insulation- Ageing in air oven : Elongation Variation )	-	2000	-
15.1 d)2)(Physical tests for outer sheath- Ageing in air oven : Tensile stregth )	-	2000	-
15.1 d)2)(Physical tests for outer sheath -Ageing in air oven : Elongation )	-	2000	-
15.1 d)2)(Physical tests for outer sheath- Ageing in air oven : Tensile stregth Variation )	-	2000	-
15.1 d)2)(Physical tests for outer sheath -Ageing in air oven : Elongation Variation )	-	2000	-
15.1 d)3)(Phyaical tests for insulation : Shrinkage )	-	1000	-
15.1 d)3)(Phyaical tests for insulation : Shrinkage - Crack observed )	-	1000	-
15.1 d)3)(Phyaical tests for Sheath : Shrinkage )	-	1000	-
15.1 d)3)(Phyaical tests for Sheath : Shrinkage - Crack observed )	-	1000	-
15.1 d)4)(Hot deformation : Insulation )	-	1000	-
15.1 d)4)(Hot deformation : Sheath )	-	1000	-
15.1 d)5)( Loss of mass in air oven- Insulation )	-	2000	-
15.1 d)5)( Loss of mass in air oven- sheath )	-	2000	-
15.1 d)6)(Heat shock test- Insulation )	-	1000	-
15.1 d)6)(Heat shock test- sheath )	-	1000	-
15.1 d)7)(Thermal stability- insulation )	-	1000	-
15.1 d)7)(Thermal stability- Sheath )	-	1000	-
15.1 e)(Insulation resistance test : Volume Resistivity )	-	1000	-
15.1 e)(Insulation resistance test : IR Constant )	-	1000	-
15.1 f)(High voltage test ( water immersion test ))	-	2000	-
15.1 g)(High voltage test at room temperature)	-	1000	-
15.1 g)(High voltage test at room temperature)	-	1000	-
15.4 a)(Cold bend test- Insulation ( Optional test))	-	1000	-
15.4 a)(Cold bend test- Sheath ( Optional test))	-	1000	-
15.4 b)(Cold impact test- Insulation ( Optional test))	-	1000	-
15.4 b)(Cold impact test- Sheath ( Optional test))	-	1000	-
15.4 c)(Armour resistance test ( for other than mining cables ).- Optional test )	-	1000	-
16.1(DETAILS OF TESTS : General)	-	500	-
16.2(DETAILS OF TESTS : High Voltage Test at Room Temperature)	-	1000	-
16.3.1(High Voltage Test ( Water Immersion Test ) : a.c. Test)	-	2000	-
16.3.2(High Voltage Test ( Water Immersion Test ) : d.c. Test)	-	3000	-
16.4(Flammability Test)	-	1000	-
16.5(Oxygen Index Test)	-	3000	-
16.6(Flame Retardance Test on Single Cables)	-	1000	-
16.7(Flame Retardance Test on Bunched Cables)	-	5000	-
16.9(Test for Halogen Acid Gas Evolution)	-	3000	-
16.1(Temperature Index)	-	3000	-
17.1(IDENTIFICATION : Manufacturer’s Identification)	-	500	-
17.2(IDENTIFICATION : Cable Identification)	-	500	-
17.2.1(IDENTIFICATION : Cable Identification)	-	500	-
17.3(IDENTIFICATION : Cable Code)	-	500	-
15.1.e(Insulation resistance Test- Insulation resistance At Maximum rated temperature temperature)	-	1000	-
15.1.e(Insulation resistance Test- Insulation resistance constant At Room temperature)	-	1000	-
15.1.e(Insulation resistance Test- Volume Resistivity At Maximum rated temperature temperature)	-	1000	-
15.1.e(Insulation resistance Test- Volume Resistivity At Room temperature)	-	1000	-
16.4(Flammability Test- Un affected portion)	-	1000	-
16.4(Flammability Test- Period of Burning)	-	1000	-
9.3(Minimum Thickness of Reduce core insulation)	-	1000	-
9.2(Thickness of Reduce core insulation)	-	1000	-
3.1 Table 2 IS 8130(Number of wires in the conductor)	-	500	-
Cl No. 16.10(Smoke density test)	-	2000	-
Cl No. 16.8(Test for specific optical density of smoke)	-	3000	-
Table 4(Copper purity test)	-	5000	-
Cl.8(Conductor, Number of wires.)	-	500	-
Cl.8(Conductor, Number of wires.)	-	500	-
Cl.8(Flexibility class)	-	1000	-
[(Cl.15), (d), 2](After ageing, Elongation of Sheath [Percentage])	-	2000	-
15.1 a) 2)(Tensile test (for aluminium) - After stranding )	-	2000	-
Cl No. 16.10(Smoke density test)	-	3000	-
Cl No. 16.8(Test for specific optical density of smoke)	-	3000	-
Table 4(Copper purity test)	-	5000	-
Cl.8(Conductor, Number of wires.)	-	500	-
Cl.8(Conductor, Number of wires.)	-	500	-
Cl.8(Flexibility class)	-	500	-
[(Cl.15), (d), 2](After ageing, Elongation of Sheath [Percentage])	-	2000	-
Cl No. 16.10(Smoke density test)	-	3000	-
Cl No. 16.8(Test for specific optical density of smoke)	-	3000	-
Table 4(Copper purity test)	-	5000	-
Cl.8(Conductor, Number of wires.)	-	500	-
Cl.8(Conductor, Number of wires.)	-	500	-
Cl.8(Flexibility class)	-	500	-
[(Cl.15), (d), 2](After ageing, Elongation of Sheath [Percentage])	-	2000	-
Cl No. 16.10(Smoke density test)	-	3000	-
Cl No. 16.8(Test for specific optical density of smoke)	-	3000	-
Table 4(Copper purity test)	-	5000	-
Cl.8(Conductor, Number of wires.)	-	500	-
Cl.8(Conductor, Number of wires.)	-	500	-
Cl.8(Flexibility class)	-	500	-
[(Cl.15), (d), 2](After ageing, Elongation of Sheath [Percentage])	-	2000	-

15 Jun, 2026

-
Included w.e.f.16.07.2025

3565

Sleen India Biz venture Private Limited, Agra

9139736

IS 14715 : Part 2 (2016)

Jute geotextiles Part 2 Control of bank erosion in rivers and waterways – Specification (second revision)

All type

6500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
1(Thickness at 2 kPa- IS 13162 (Part 3))	-	200	-
2(Width- IS 1954)	-	100	-
2(Mass- IS 15891 (Part 1))	-	300	-
2(Thickness at 2 kPa-IS 15891 (Part 2))	-	200	-
2(Tensile strength MD*CD- IS 15891 (Part 3))	-	1500	-
1(Width- IS 1954)	-	100	-
1(Ends × Picks- IS 1963)	-	200	-
1(Thickness at 2 kPa- IS 13162 (Part 3))	-	200	-
1(Tensile strength in MD × CD,- IS 13162 (Part 5))	-	0	Tensile and elongation test price is 1500/-.
1(Elongation at break in MD × CD- IS 13162 (Part 5))	-	0	Tensile and elongation test price is 1500/-.
1(Puncture resistance- IS 16078)	-	1000	-
1(Burst strength- IS 1966 (Part 1))	-	1000	-
1(Permittivity at 50 mm constant head- IS 14324)	-	1000	-
1(Apparent opening size (A. O. S.) , O95- IS 14294)	-	500	-
1(Apparent opening size (A. O. S.) , O95- IS 14294)	-	500	-
4, Table 1, (ii)(Construction)	-	200	-
4, Table 1, (ii)(Weight at 20 percent moisture regain, g/m2 , Min, for Treated Woven Jute Geotextiles)	-	300	-
4, Table 1, (iii)(Width, cm, for Treated Woven Jute Geotextiles)	-	0	Test price for width test is 100/-.
4, Table 1, (iv)(Ends x Picks/dm, for Treated Woven Jute Geotextiles)	-	0	Test price for Ends x picks/dm is 200/-.
4, Table 1, (v)(Thickness at 2kPa, mm, for Treated Woven Jute Geotextiles)	-	0	Test price for thickness measurement is 200/-.
4, Table 1, (vi)(Tensile Strength in MD x CD, kN/m, for Treated Woven Jute Geotextiles)	-	0	Test price for tensile and elongation test is 1500/-.
4, Table 1, (vii)(Elongation at break in MD x CD, percent, for Treated Woven Jute Geotextiles)	-	0	Test price for tensile and elongation test is 1500/-.
4, Table 1, (viii)(Puncture Resistance, kN, Min, for Treated Woven Jute Geotextiles)	-	0	Test price for puncturing test is 1000/-.
4, Table 1, (ix)(Burst Strength, kPa. Min, for Treated Woven Jute Geotextiles)	-	0	Test price for bursting Strength is 1000/-.
4, Table 1, (x)(Permittivity at 50 mm constant head, sec –1 , Min, for Treated Woven Jute Geotextiles)	-	0	Test price for permittivity test is 1000/-.
4, Table 1, (xi)(Apparent opening size (A. O. S.) , O95 , Micron3, for Treated Woven Jute Geotextiles)	-	0	Test price for apparent size is 500/-.
5(Sampling)	-	300	-
6(Packaging)	-	200	-
1(Thickness at 2 kPa- IS 13162 (Part 3))	-	0	-
2(Width- IS 1954)	-	0	-
2(Mass- IS 15891 (Part 1))	-	0	-
2(Thickness at 2 kPa-IS 15891 (Part 2))	-	0	-
2(Tensile strength MD*CD- IS 15891 (Part 3))	-	0	-
1(Width- IS 1954)	-	0	-
1(Ends × Picks- IS 1963)	-	0	-
1(Thickness at 2 kPa- IS 13162 (Part 3))	-	0	-
1(Tensile strength in MD × CD,- IS 13162 (Part 5))	-	0	-
1(Elongation at break in MD × CD- IS 13162 (Part 5))	-	0	-
1(Puncture resistance- IS 16078)	-	0	-
1(Burst strength- IS 1966 (Part 1))	-	0	-
1(Permittivity at 50 mm constant head- IS 14324)	-	0	-
1(Apparent opening size (A. O. S.) , O95- IS 14294)	-	0	-
1(Apparent opening size (A. O. S.) , O95- IS 14294)	-	0	-
4, Table 1, (ii)(Construction)	-	0	-
4, Table 1, (ii)(Weight at 20 percent moisture regain, g/m2 , Min, for Treated Woven Jute Geotextiles)	-	0	-
4, Table 1, (iii)(Width, cm, for Treated Woven Jute Geotextiles)	-	0	-
4, Table 1, (iv)(Ends x Picks/dm, for Treated Woven Jute Geotextiles)	-	0	-
4, Table 1, (v)(Thickness at 2kPa, mm, for Treated Woven Jute Geotextiles)	-	0	-
4, Table 1, (vi)(Tensile Strength in MD x CD, kN/m, for Treated Woven Jute Geotextiles)	-	0	-
4, Table 1, (vii)(Elongation at break in MD x CD, percent, for Treated Woven Jute Geotextiles)	-	0	-
4, Table 1, (viii)(Puncture Resistance, kN, Min, for Treated Woven Jute Geotextiles)	-	0	-
4, Table 1, (ix)(Burst Strength, kPa. Min, for Treated Woven Jute Geotextiles)	-	0	-
4, Table 1, (x)(Permittivity at 50 mm constant head, sec –1 , Min, for Treated Woven Jute Geotextiles)	-	0	-
4, Table 1, (xi)(Apparent opening size (A. O. S.) , O95 , Micron3, for Treated Woven Jute Geotextiles)	-	0	-
5(Sampling)	-	0	-
6(Packaging)	-	0	-
1(Thickness at 2 kPa- IS 13162 (Part 3))	-	0	-
2(Width- IS 1954)	-	0	-
2(Mass- IS 15891 (Part 1))	-	0	-
2(Thickness at 2 kPa-IS 15891 (Part 2))	-	0	-
2(Tensile strength MD*CD- IS 15891 (Part 3))	-	0	-
1(Width- IS 1954)	-	0	-
1(Ends × Picks- IS 1963)	-	0	-
1(Thickness at 2 kPa- IS 13162 (Part 3))	-	0	-
1(Tensile strength in MD × CD,- IS 13162 (Part 5))	-	0	-
1(Elongation at break in MD × CD- IS 13162 (Part 5))	-	0	-
1(Puncture resistance- IS 16078)	-	0	-
1(Burst strength- IS 1966 (Part 1))	-	0	-
1(Permittivity at 50 mm constant head- IS 14324)	-	0	-
1(Apparent opening size (A. O. S.) , O95- IS 14294)	-	0	-
1(Apparent opening size (A. O. S.) , O95- IS 14294)	-	0	-
4, Table 1, (ii)(Construction)	-	0	-
4, Table 1, (ii)(Weight at 20 percent moisture regain, g/m2 , Min, for Treated Woven Jute Geotextiles)	-	0	-
4, Table 1, (iii)(Width, cm, for Treated Woven Jute Geotextiles)	-	0	-
4, Table 1, (iv)(Ends x Picks/dm, for Treated Woven Jute Geotextiles)	-	0	-
4, Table 1, (v)(Thickness at 2kPa, mm, for Treated Woven Jute Geotextiles)	-	0	-
4, Table 1, (vi)(Tensile Strength in MD x CD, kN/m, for Treated Woven Jute Geotextiles)	-	0	-
4, Table 1, (vii)(Elongation at break in MD x CD, percent, for Treated Woven Jute Geotextiles)	-	0	-
4, Table 1, (viii)(Puncture Resistance, kN, Min, for Treated Woven Jute Geotextiles)	-	0	-
4, Table 1, (ix)(Burst Strength, kPa. Min, for Treated Woven Jute Geotextiles)	-	0	-
4, Table 1, (x)(Permittivity at 50 mm constant head, sec –1 , Min, for Treated Woven Jute Geotextiles)	-	0	-
4, Table 1, (xi)(Apparent opening size (A. O. S.) , O95 , Micron3, for Treated Woven Jute Geotextiles)	-	0	-
5(Sampling)	-	0	-
6(Packaging)	-	0	-

15 May, 2027

-
Included w.e.f 02.06.2025

3566

OPTIMAS TESTING SERVICES, OPTIMAS OE SOLUTIONS INDIA PRIVATE LIMITED

7187406

IS 18480 : Part 1 (2023)

Cross Recessed Tapping Screws: Part 1 Pan Head

7200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause. 3.0(Dimenssions.)	-	100	-
Clause. 3.0(Thread size.)	-	100	-
Clause. 3.0(Length)	-	100	-
Clause. 4.0(Material)	-	100	-
Clause. 4.0(Cross Recess)	-	100	-
Clause. 4.0(Tolerances)	-	100	-
Clause. 4.0(Mechnical and functional properties.)	-	100	-
Clause. 4.0(Finish)	-	100	-
Clause. 4.0(Acceptability)	-	100	-
Clause.5.0(Designation)	-	100	-
Clause.5.0(Marking)	-	100	-
Clause. 4.0(Thread)	-	100	-

20 Aug, 2028

-
Clauses No.4 (Thread-forming capacity Drive test)

3567

HEXIQON LABORATORY PRIVATE LIMITED, AHMEDABAD

7167306

IS 2556 : Part 14 (2024)

Vitreous China Sanitary Appliances - Specification Part 14 Specific Requirements of Integrated Squatting Pans (Second Revision)

Long pattern 500 mm and any other patterns and size

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
As per Clause 3(General requirements: - Material and manufacture as per IS 2556 (Part 1))	-	200	-
As per Clause 3(General requirements: - Application of Glazing as per IS 2556 (Part 1))	-	200	-
As per Clause 3(General requirements: -Permissible blemishes or defects (WC pans, Bidets, Squatting pans, Urinals, Partition plates, Pedestals, Short Pedestals and Accessories)-General-Wavy finish as per IS 2556 (Part 1))	-	200	-
As per Clause 3(General requirements-Permissible blemishes or defects (WC pans, Bidets, Squatting pans, Urinals, Partition plates, Pedestals, Short Pedestals and Accessories)-General-Warpage as per IS 2556 (Part 1))	-	200	-
As per Clause 3(General requirements-Permissible blemishes or defects (WC apns, Bidets, Squatting pans, Urinals, Partition plates, Pedestals, Short Pedestals and Accessories)-General-Bit as per IS 2556 (Part 1))	-	200	-
As per Clause 3(General requirements-Permissible blemishes or defects (WC apns, Bidets, Squatting pans, Urinals, Partition plates, Pedestals, Short Pedestals and Accessories)-General-Discoloration as per IS 2556 (Part 1))	-	200	-
As per Clause 3(General requirements-Permissible blemishes or defects (WC pans, Bidets, Squatting pans, Urinals, Partition plates, Pedestals, Short Pedestals and Accessories)-Flushing surface and horizontal face of rims of WC pans, Squatting pans bidets and urinals-Spots, blisters and pinholes as per IS 2556 (Part 1))	-	200	-
As per Clause 3(General requirements-Permissible blemishes or defects (WC pans, Bidets, Squatting pans, Urinals, Partition plates, Pedestals, Short Pedestals and Accessories)-Flushing surface and horizontal face of rims of WC pans, Squatting pans bidets and urinals-Bubbles and specks as per IS 2556 (Part 1))	-	200	-
As per Clause 3(General requirements-Permissible blemishes or defects (WC pans, Bidets, Squatting pans, Urinals, Partition plates, Pedestals, Short Pedestals and Accessories)-Flushing surface and horizontal face of rims of WC pans, Squatting pans bidets and urinals-Polishing Marks as per IS 2556 (Part 1))	-	200	-
As per Clause 3(General requirements-Permissible blemishes or defects (WC Pans, Bidets, Squatting pans, Urinals, Partition plates, Pedestals, Short Pedestals and Accessories)-Visible surfaces other than above-Spots, blisters and pinholes as per IS 2556 (Part 1))	-	200	-
As per Clause 3(General requirements-Permissible blemishes or defects (WC pans, Bidets, Squatting pans, Urinals, Partition plates, Pedestals, Short Pedestals and Accessories)-Visible surfaces other than above-Bubbles and specks as per IS 2556 (Part 1))	-	200	-
As per Clause 3(General requirements-Permissible blemishes or defects (WC pans, Bidets, Squatting pans, Urinals, Partition plates, Pedestals, Short Pedestals and Accessories)-Visible surfaces other than above-Polishing Marks as per IS 2556 (Part 1))	-	200	-
As per Clause 3(General requirements - Minimum Thickness as per IS 2556 (Part 1))	-	100	-
As per Clause 3(General requirements - Warpage as per IS 2556 (Part 1))	-	200	-
As per Clause 3(General requirements - Crazing as per IS 2556 (Part 1))	-	1200	-
As per Clause 3(General requirements - Water Absorption as per IS 2556 (Part 1))	-	1500	-
As per Clause 3(General requirements - Modulus of Rupture IS 2556 (Part 1))	-	600	-
As per Clause 3(General requirements - Chemical Resistance Test as per IS 2556 (Part 1))	-	1500	-
As per Clause 3(General requirements - Resistance to Staining and Burning as per IS 2556 (Part 1))	-	1000	-
As per Clause 4(PATTERN)	-	50	-
As per Clause 5.1 - Table 1 - i)(DIMENSIONS AND TOLERANCES - L)	-	200	-
As per Clause 5.1 - Table 1 - ii)(DIMENSIONS AND TOLERANCES - L1)	-	200	-
As per Clause 5.1 - Table 1 - iii)(DIMENSIONS AND TOLERANCES - L2)	-	200	-
As per Clause 5.1 - Table 1 - iv)(DIMENSIONS AND TOLERANCES - W1)	-	200	-
As per Clause 5.1 - Table 1 - v)(DIMENSIONS AND TOLERANCES - W2)	-	200	-
As per Clause 5.1 - Table 1 - vi)(DIMENSIONS AND TOLERANCES - h1)	-	200	-
As per Clause 5.1 - Table 1 - vii)(Slope of bottom of pan - ∝)	-	200	-
As per Clause 5.1 - Table 1 - viii)(DIMENSIONS AND TOLERANCES - T)	-	200	-
As per Clause 5.1 - Table 2 - i)(DIMENSIONS AND TOLERANCES - a)	-	200	-
As per Clause 6.1 - Table 2 - ii)(DIMENSIONS AND TOLERANCES - b)	-	200	-
As per Clause 6.1 - Table 2 - iii)(DIMENSIONS AND TOLERANCES - d1)	-	200	-
As per Clause 5 - Table 2 - iv)(DIMENSIONS AND TOLERANCES - d2)	-	200	-
As per Clause 5 - Table 2 - v)(DIMENSIONS AND TOLERANCES - d3)	-	200	-
As per Clause 5 - Table 2 - vi)(DIMENSIONS AND TOLERANCES - m)	-	200	-
As per Clause 5 - Table 2 - vii)(DIMENSIONS AND TOLERANCES - h2)	-	200	-
As per Clause 5 - Table 2 - viii)(DIMENSIONS AND TOLERANCES - ∅1)	-	200	-
As per Clause 6.3 - Table 3 - i)(DIMENSIONS AND TOLERANCES - d1)	-	200	-
As per Clause 6.3 - Table 3 - ii)(DIMENSIONS AND TOLERANCES - d2)	-	200	-
As per Clause 6.3 - Table 2 - iii)(DIMENSIONS AND TOLERANCES - d5)	-	200	-
As per Clause 6.3 - Table 2 - iv)(DIMENSIONS AND TOLERANCES - f)	-	200	-
As per Clause 6.3 - Table 2 - v)(DIMENSIONS AND TOLERANCES - h)	-	200	-
As per Clause 6.1(CONSTRUCTION)	-	200	-
As per Clause 6.2(CONSTRUCTION)	-	200	-
As per Clause 6.3(CONSTRUCTION)	-	200	-
As per Clause 7(FINISH)	-	200	-
As per Clause 8.2(Flushing tests - Toilet Paper Test)	-	400	-
As per Clause 8.3(Flushing tests - Smudge Test)	-	400	-
As per Clause 8.4(Flushing tests - Holding Capacity Test)	-	400	-
As per Clause 8.5(Flushing tests - Single Ball Test)	-	400	-
As per Clause 10(Additional requirements for water effeciency as per IS 17650 part 1)	-	3000	-

07 Feb, 2027

-
Included w.e.f.30.04.2025

3568

DELHI TEST HOUSE (65) KUNDLI-2 SONIPAT

9138006

IS 613 (2000)

Copper rods and bars for electrical purposes - Specification (Third Revision)

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause no.3(SUPPLY OF MATERIAL)	-	50	-
Clause no.6(FREEDOM FROM DEFECTS)	-	200	-
Clause no.7(CONDITION OF SUPPLY)	-	50	-
Clause no.8(CHEMICAL COMPOSITION)	-	4000	-
Clause no.9.1, table no,1(" tensile test ")	-	2100	-
Clause no.9.2(Bend test)	-	400	-
"Clause no.10.1 and 11.1.1 Table No. 2"(Dimensions and Tolerances)	-	400	-
"Clause no.10.2 and Table No. 3"("Tolerances on Length of Bar Rod in Straight Length ")	-	250	-
"Clause no.10.4 and Table No. 4"(Corner Radius and Tolerances)	-	250	-
"Clause no.11 and Table No. 5"(Electrical Resistivity)	-	2100	-
Clause no. 13(packing)	-	50	-
Clause no. 14(Marking)	-	150	-
Clause no.3(SUPPLY OF MATERIAL)	-	50	-
Clause no.6(FREEDOM FROM DEFECTS)	-	200	-
Clause no.7(CONDITION OF SUPPLY)	-	50	-
Clause no.8(CHEMICAL COMPOSITION)	-	4000	-
Clause no.9.1, table no,1(" tensile test ")	-	2100	-
Clause no.9.2(Bend test)	-	400	-
"Clause no.10.1 and 11.1.1 Table No. 2"(Dimensions and Tolerances)	-	400	-
"Clause no.10.2 and Table No. 3"("Tolerances on Length of Bar Rod in Straight Length ")	-	250	-
"Clause no.10.4 and Table No. 4"(Corner Radius and Tolerances)	-	250	-
"Clause no.11 and Table No. 5"(Electrical Resistivity)	-	2100	-
Clause no. 13(packing)	-	50	-
Clause no. 14(Marking)	-	150	-
Clause no.3(SUPPLY OF MATERIAL)	-	50	-
Clause no.6(FREEDOM FROM DEFECTS)	-	200	-
Clause no.7(CONDITION OF SUPPLY)	-	50	-
Clause no.8(CHEMICAL COMPOSITION)	-	4000	-
Clause no.9.1, table no,1(" tensile test ")	-	2100	-
Clause no.9.2(Bend test)	-	400	-
"Clause no.10.1 and 11.1.1 Table No. 2"(Dimensions and Tolerances)	-	400	-
"Clause no.10.2 and Table No. 3"("Tolerances on Length of Bar Rod in Straight Length ")	-	250	-
"Clause no.10.4 and Table No. 4"(Corner Radius and Tolerances)	-	250	-
"Clause no.11 and Table No. 5"(Electrical Resistivity)	-	2100	-
Clause no. 13(packing)	-	50	-
Clause no. 14(Marking)	-	150	-

31 Dec, 2026

-
Included w.e.f.02.06.2025

3569

OPTIMAS TESTING SERVICES, OPTIMAS OE SOLUTIONS INDIA PRIVATE LIMITED

7187406

IS 18471 : Part 2 (2023)

Fasteners ï¿½ Cross Recessed Drilling Screws with Tapping Screw Thread Part 2 Countersunk Head

7200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause. 3.0(Dimenssions.)	-	100	NO ANY REMARK
Clause. 3.0(Thread size.)	-	100	NO ANY REMARK
Clause. 3.0(Length)	-	100	NO ANY REMARK
Clause. 4.0(Material)	-	100	NO ANY REMARK
Clause. 4.0(Thread)	-	100	NO ANY REMARK
Clause. 4.0(Cross recesses)	-	100	NO ANY REMARK
Clause. 4.0(Mechnical and functional properties.)	-	100	NO ANY REMARK
Clause. 4.0(Finish)	-	100	NO ANY REMARK
Clause. 4.0(Acceptability)	-	100	NO ANY REMARK
Clause.5.0(Designation)	-	100	NO ANY REMARK
Clause.5.0(Marking)	-	100	NO ANY REMARK

20 Aug, 2028

-
Clauses No.4 (Hydrogen embrittlement, Inspection of the drilled hole, drilling and screwing-in-test)

3570

OPTIMAS TESTING SERVICES, OPTIMAS OE SOLUTIONS INDIA PRIVATE LIMITED

7187406

IS 18471 : Part 1 (2023)

Fasteners ï¿½ Cross Recessed Drilling Screws with Tapping Screw Thread Part 1 Pan Head

All

7200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause. 3.0(Dimenssions.)	-	100	NO ANY REMARK
Clause. 3.0(Dimenssions.)	-	100	NO ANY REMARK
Clause. 3.0(Thread size.)	-	100	NO ANY REMARK
Clause. 3.0(Length)	-	100	NO ANY REMARK
Clause. 4.0(Material)	-	100	NO ANY REMARK
Clause. 4.0(Thread)	-	100	NO ANY REMARK
Clause. 4.0(Cross recesses)	-	100	NO ANY REMARK
Clause. 4.0(Mechnical and functional properties.)	-	100	NO ANY REMARK
Clause. 4.0(Finish)	-	100	NO ANY REMARK
Clause. 4.0(Acceptability)	-	100	NO ANY REMARK
Clause.5.0(Designation)	-	100	NO ANY REMARK
Clause.5.0(Marking)	-	100	NO ANY REMARK

20 Aug, 2028

-
Clauses No.4 (Hydrogen embrittlement, Inspection of the drilled hole, drilling and screwing-in-test)

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number