| 1 |
BIS, Eastern Regional Laboratory (ERL)
| IS 16088 (2012) |
Chlorinated polyvinyl chloride (CPVC) pipes for automatic sprinkler fire extinguishing system - Specification |
- |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 7.1.1 IS 12235 (Part 1)
Table 1 (Mean outside Diameter) |
- |
|
|
|
| 7.1.1.1
IS 12235 (Part 1)
Table 1 (Outside Diameter at any point) |
- |
|
|
|
| 7.1.2
IS 12235 (Part 1)
Table 1 (Wall Thickness ) |
- |
|
|
|
| 9.1 (Visual Appearance) |
- |
|
|
|
| 7.1.3 (Length) |
- |
|
|
|
| 8 (Pipe Ends) |
- |
|
|
|
| 9.2
IS 12235 (Part 3) (Opacity) |
- |
|
|
|
| 9.3 (Reversion test :
) |
- |
|
|
|
| 9.4 (Vicat Softening temperature:
) |
- |
|
|
|
| 9.5 (Density) |
- |
|
|
|
| 10.2 (resistance to external blows at 0 deg c) |
- |
|
|
|
| 10.4
IS 12235(Part 19) (Tensile Strength :
) |
- |
|
|
|
|
- |
-
Except Short term test (cl. 10.1.1), Long Term Test (cl. 10.1.2), Fire Exposure Test(cl 9.6), Flammability Test (cl 9.7), Flattening Test (cl 10.3 ), Kinking Resistance Test(Cl 10.5), CPVC Fire sprinkler pipes and fitting (cl. 10.6). |
| 2 |
WELL TECH TEST AND RESEARCH CENTER
| IS 4985 (2021) |
UNPLASTICIZED PVC PIPES FOR POTABLE WATER SUPPLIES SPECIFICATION Fourth Revision |
TYPE &TYPE B/ Class 1-6 & Plumbing Pipe/ OD 63mm-250mm |
8000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 10.1(Colour) |
- |
300 |
|
- |
| 10.1(Surface Finish) |
- |
300 |
|
- |
| 7.2.1.1 Table3(Angle of taper (Note-1)) |
- |
300 |
|
- |
| 10.7(Sulphated Ash Content) |
- |
750 |
|
- |
| 7(DIMENSIONS-PIPE-Nominal Diameter) |
- |
750 |
|
- |
| 7.1.1.1(DIMENSIONS-PIPE-Mean O.D. (Minimum)) |
- |
200 |
|
- |
| 7.1.1.1(DIMENSIONS-PIPE-Mean O.D. (Mamimum)) |
- |
200 |
|
- |
| 7.1.1.1(DIMENSIONS-PIPE-Mean O.D. Variation) |
- |
200 |
|
- |
| 7.1.1.2(DIMENSIONS-PIPE-O.D. at any Point (Minimum)) |
- |
200 |
|
- |
| 7.1.1.2(DIMENSIONS-PIPE-O.D. at any Point (Maximum)) |
- |
200 |
|
- |
| 7.1.2.1(DIMENSIONS-PIPE-Thickness(Minimum)) |
- |
300 |
|
- |
| 7.1.2.1(DIMENSIONS-PIPE-Thickness(Maximum)) |
- |
300 |
|
- |
| 7.1.2.1(DIMENSIONS-PIPE-Average Thickness) |
- |
300 |
|
- |
| 7.2.1(DIMENSIONS-Socket) |
- |
400 |
|
- |
| 7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Minimum Length) |
- |
300 |
|
- |
| 7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Diameter at mid point of the socket length (Minimum)) |
- |
300 |
|
- |
| 7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Diameter at mid point of the socket length (Maximum)) |
- |
350 |
|
- |
| 7.2.1.2(a)-Table 5(DIMENSIONS-Sockets for elastomeric sealing ring joints-Minimum depth of engagement) |
- |
300 |
|
- |
| 7.2.1.2-Table 4(DIMENSIONS-Sockets for elastomeric sealing ring joints-Socket inner Diameter) |
- |
0 |
|
- |
| 8(SEALING RINGS) |
- |
250 |
|
- |
| 9.1(PIPE ENDS) |
- |
250 |
|
- |
| 10.2(PHYSICAL AND CHEMICAL CHARACTERISTICS-Opacity) |
- |
500 |
|
- |
| 10.4(PHYSICAL AND CHEMICAL CHARACTERISTICS- Reversion Test) |
- |
750 |
|
- |
| 10.5(PHYSICAL AND CHEMICAL CHARACTERISTICS- Vicat Softening Temperature) |
- |
750 |
|
- |
| 11.1-Table 6(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Type Test)) |
- |
1000 |
|
- |
| 11.1-Table 6(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test)) |
- |
1000 |
|
- |
| 11.1-Table 7(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Type Test)-for Integral Sealing Ring Sockets) |
- |
500 |
|
- |
| 11.1-Table 7(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test)-for Integral Sealing Ring Sockets) |
- |
500 |
|
- |
| 11.1.1(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test)-for Plumbing pipes) |
- |
500 |
|
- |
| 11.2(Resistance to External Blows at 0°C) |
- |
1500 |
|
- |
| 10.3(Effect on Water Test) |
- |
2500 |
|
- |
| 5(CLASSIFICATION OF PIPES) |
- |
2500 |
|
- |
| 7.1.1.2(DIMENSIONS-PIPE-Ovality (Maximum)) |
- |
300 |
|
- |
| 10.1(PHYSICAL AND CHEMICAL CHARACTERISTICS-Visual Appearance) |
- |
300 |
|
- |
| 10.1.1(PHYSICAL AND CHEMICAL CHARACTERISTICS-Visual Appearance) |
- |
300 |
|
- |
| 7.2.1(DIMENSIONS-Socket) |
- |
300 |
|
- |
| 10.6(PHYSICAL AND CHEMICAL CHARACTERISTICS- Density) |
- |
500 |
|
- |
| 7.1.3(mean outside diameter, outside diameter at
any point, and wall thickness of plumbing pipes) |
- |
300 |
|
- |
| 7.1.4(Length) |
- |
500 |
|
- |
| 7.2.1.2b(Maximum inner diameter of groove) |
- |
500 |
|
- |
| 13.1(Marking) |
- |
250 |
|
- |
| cL-13.1.1(Marking) |
- |
250 |
|
- |
| Cl-13.1.2(Marking) |
- |
250 |
|
- |
|
30 Mar, 2027 |
-
- |
| 3 |
CIPET MYSURU
| IS 7834 : Part 4 (1987) |
injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 4 Specific requirements for 90 degree tees |
- |
7294 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 2.2.2, Table 1(Size) |
- |
375 |
|
For all Dimensions |
| 2.2.2, Table 1(90 ̊ Elbow Laying
Length) |
- |
0 |
|
Included in dimensions |
| 2.2.3( inside diameter of the socket) |
- |
0 |
|
Included in dimensions |
| 2.2.3(Socket length) |
- |
0 |
|
Included in dimensions |
| 2.1(General) |
- |
0 |
|
Included in next |
| 2.1(General) |
- |
6918.75 |
|
RS.3843 is for addition of (Stress relief test Rs. 525, OpacityRs. 431.25, EOW. Rs.2250, &Short-term hydraulic test Rs. 637.50) Rs. 637.50 for socket fitting . And
Rs. 3075 for raw material ( VCM Content Rs.2250 & K Value Rs. 825) |
| 2.2.3(Socket length) |
- |
0 |
|
- |
|
31 Dec, 2026 |
-
- |
| 4 |
CIPET MYSURU
| IS 7834 : Part 2 (1987) |
injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 2 Specific requirements for 45 degrees elbows |
- |
7294 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 2.2.2, Table 1(Size) |
- |
375 |
|
Thickness |
| 2.2.3(socket length) |
- |
0 |
|
Included In Thickness |
| 2.1(General) |
- |
431.25 |
|
Opacity |
| 2.2.2, Table 1(45 ̊ Elbow Laying
Length) |
- |
0 |
|
Included In Thickness |
| 2.2.3( inside diameter of the socket) |
- |
5962.75 |
|
Included In Thickness
Effect on water Rs.2250/- & hydro pressure test Rs.637.50 for pipes
VCM Content -Rs. 2250/- & K Value Rs. 825/- for raw material |
| 2.1(General) |
- |
525 |
|
Stress relief test |
| 6.1.1(VCM Content Test) |
- |
0 |
|
- |
| 2.2.2, Table 1(Size) |
- |
0 |
|
- |
|
31 Dec, 2026 |
-
- |
| 5 |
CIPET MYSURU
| IS 7834 : Part 6 (1987) |
injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 6 Specific requirements for sockets |
- |
7294 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 2.2.2, Table 1(Size) |
- |
375 |
|
For All Dimensions |
| 2.2.2, Table 1(Socket Laying
Length) |
- |
0 |
|
Included in above dimension charges |
| 2.2.3( inside diameter of the socket) |
- |
0 |
|
Included in above dimension charges |
| 2.2.3(Socket length) |
- |
0 |
|
Included in above dimension charges |
| 2.1(General) |
- |
0 |
|
Added in below charges |
| 2.1(General) |
- |
6918.75 |
|
RS.3843 is for addition of (Stress relief test Rs. 525, Opacity Rs. 431.25, EOW. Rs.2250, &Short-term hydraulic test Rs. 637.50) Rs. 637.50 for socket fitting . And
Rs. 3075 for raw material ( VCM Content Rs.2250 & K Value Rs. 825) |
| 6.1.1(VCM Content Test) |
- |
0 |
|
- |
|
31 Dec, 2026 |
-
- |
| 6 |
CIPET MYSURU
| IS 14887 (2014) |
Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sacks for packaging of 50 kg food grains – Specification (first revision) |
HDPE woven sacks for packaging 50kg food grains |
19117.50 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 3.2(Tapes – Width and Thickness
( IS 6192/IS 11197)) |
- |
187.50 |
|
Tapes – Width and Thickness
( IS 6192/IS 11197) |
| 3.2(Tapes – Linear Density
(IS 6192/IS 11197)) |
- |
0 |
|
Tapes – Linear Density
(IS 6192/IS 11197) |
| 3.2(Tapes – Tenacity (IS 6192/IS 11197)) |
- |
187.50 |
|
Tapes – Tenacity (IS 6192/IS 11197) |
| 4.2 and Table 1 ii(Dimensions ) |
- |
187.50 |
|
Dimension |
| 3.2(Tapes – Dimensional stability (PP)
(IS 11197)) |
- |
1500 |
|
Tapes – Dimensional stability (PP)
(IS 11197) include identification |
| 4.2 and Table 1 ix(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering ) |
- |
12830 |
|
Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering |
| 4.2 and Table 1 vi(Average breaking strength of fabric ) |
- |
2650 |
|
Average breaking strength of fabric |
| 4.2 and Table 1 vi(Breaking strength of bottom seam ) |
- |
1325 |
|
Breaking strength of bottom seam |
| 4.2 and Table 1 viii(Elongation at break of fabric ) |
- |
0 |
|
Elongation at break of fabric |
| 4.2 and Table 1 x(Ash content ) |
- |
712.5 |
|
Ash content |
| 4.2 and Table 1 v(Mass of sack ) |
- |
225 |
|
Mass of sack |
| 5.2 and Table 1 iii(Ends per dm ) |
- |
187.5 |
|
Ends per dm |
| 5.2 and Table 1 iv(Picks per dm ) |
- |
187.5 |
|
Picks per dm |
| 3.2(MFI) |
- |
825 |
|
MFI |
| 3.1(Overall Migration) |
- |
1275 |
|
Overall Mig |
| 3.1(Material Identification) |
- |
1500 |
|
Identification |
| 3.2(Tapes – Heat Shrinkage (HDPE) (Cl. 3.2 and IS 6192)) |
- |
825 |
|
Heat Shrinkage |
| 4.1 and 3.4(Mass of bale (Cl. 4.1), Capacity (Cl 3.4)) |
- |
0 |
|
Included in dimension |
| 3.3.1(Bottom seam (IS 10789)) |
- |
0 |
|
Included in dimension |
|
31 Dec, 2026 |
-
- |
| 7 |
CIPET MYSURU
| IS 7834 : Part 1 (1987) |
injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 1 General requirements |
Injection moulded PVC Socket fittings |
4219 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl.4(Minimum Thickness) |
- |
375 |
|
it will cover all dimension |
| Cl. 5.1.1, 5.1.2, Table 1, Fig 1(Minimum Socket Length) |
- |
0 |
|
it will cover all dimension |
| Cl. 5.1.1, 5.1.2, Table 1, Fig 1(Mean Socket Internal Diameter at Mid-Point of Socket Length) |
- |
0 |
|
it will cover all dimension |
| Cl. 5.1.1, 5.1.2, Table 1, Fig 1(Out-of-roundness tolerances of socket inside diameter) |
- |
0 |
|
it will cover all dimension |
| Cl. 6.1(Stress Relief Test- Appendix A) |
- |
525 |
|
for stress relief |
| Cl. 6.2(Opacity- Appendix B) |
- |
431.25 |
|
for opacity |
| Cl. 6.3(Effect on Water[(Lead ( first extraction )]- Appendix C) |
- |
2250 |
|
for complete effect on water |
| Cl. 6.3(Effect on Water[(Lead ( third extraction )]- Appendix C) |
- |
0 |
|
for complete effect on water |
| Cl. 6.3(Effect on Water [Dialkyl tin C4, and higher homologues, measured as tin ( third extraction )]- Appendix C) |
- |
0 |
|
for complete effect on water |
| Cl. 6.3(Effect on Water [Other toxic substances ( third extraction )]- Appendix C) |
- |
0 |
|
for complete effect on water |
| Cl. 6.4(Short-Term Hydraulic Test- Appendix D) |
- |
637.50 |
|
for short term test |
| 6.1.1(VCM Content Test) |
- |
0 |
|
- |
| 3(Size of Fitting -) |
- |
0 |
|
- |
|
31 Dec, 2026 |
-
- |
| 8 |
CIPET MYSURU
| IS 7834 : Part 3 (1987) |
injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 3 Specific requirements for 90 degree elbows |
- |
7294 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| cl 2.2.2(Dimensions) |
- |
375 |
|
For Dimensions Thickness & Socket length) |
| Cl. 2.1 (Ref. Cl. 6.3 of IS 7834 (part 1) : 1987(Effect on water - Lead (first extraction) - Appendix C ) |
- |
2250 |
|
For EOW Including all element detection |
| Cl. 2.1 (Ref. Cl. 6.3 of IS 7834 (part 1) : 1987(Effect on water - Lead (third extraction) - Appendix C) |
- |
0 |
|
Included above |
| Cl. 2.1 (Ref. Cl. 6.3 of IS 7834 (part 1) : 1987(Effect on water - Dialkyl tin C4 and higher homologues measured as tin (third extraction) - Appendix C) |
- |
0 |
|
Included above |
| Cl. 2.1 (Ref. Cl. 6.3 of IS 7834 (part 1) : 1987(Effect on water - Other toxic substances (third extraction) - Appendix C) |
- |
4668.75 |
|
EOW water charges included above,
RS.1593 is for addition of (Stress relief test Rs. 525, OpacityRs. 431.25, Short-term hydraulic test Rs. 637.50) Rs. 637.50 for socket fitting . And
Rs. 3075 for raw material ( VCM Content Rs.2250 & K Value Rs. 825) |
| 2.2.2 table 1(Laying length) |
- |
0 |
|
- |
| 6.1.1(VCM Content Test) |
- |
2250 |
|
- |
|
31 Dec, 2026 |
-
- |
| 9 |
CIPET MYSURU
| IS 7834 : Part 5 (1987) |
Injection Moulded PVC Socket Fittings With Solvent Cement Joints for Water Supplies - Part 5 : Specific Requirements for 45 degree Tees |
- |
7294 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 2.2.2, Table 1(Size) |
- |
375 |
|
All DImensions |
| 2.2.2, Table 1(45 ̊ Tees Laying
Length, Z) |
- |
0 |
|
Included in above dimension charges |
| 2.2.3( inside diameter of the socket) |
- |
0 |
|
Included in above dimension charges |
| 2.2.3(Socket length) |
- |
0 |
|
Included in above dimension charges |
| 2.1(General) |
- |
6918 |
|
RS.3843 is for addition of (Stress relief test Rs. 525, OpacityRs. 431.25, EOW. Rs.2250, &Short-term hydraulic test Rs. 637.50) Rs. 637.50 for socket fitting . And
Rs. 3075 for raw material ( VCM Content Rs.2250 & K Value Rs. 825) |
| 6.1.1(VCM Content Test) |
- |
0 |
|
- |
|
31 Dec, 2026 |
-
- |
| 10 |
CIPET MYSURU
| IS 7834 : Part 7 (1987) |
injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 7 Specific requirements for unions |
- |
7294 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 2.2.2, Table 1(Size) |
- |
375 |
|
For All Dimensions |
| 2.2.2, Table 1(Union Laying
Length) |
- |
0 |
|
Included in above dimension charges |
| 2.2.3( inside diameter of the socket) |
- |
0 |
|
Included in above dimension charges |
| 2.2.3(Socket length) |
- |
0 |
|
Included in above dimension charges |
| 2.1(General) |
- |
0 |
|
Added in below charges |
| 2.1(General) |
- |
6918.75 |
|
RS.3843 is for addition of (Stress relief test Rs. 525, OpacityRs. 431.25, EOW. Rs.2250, &Short-term hydraulic test Rs. 637.50) Rs. 637.50 for socket fitting . And
Rs. 3075 for raw material ( VCM Content Rs.2250 & K Value Rs. 825) |
| 6.1.1(VCM Content Test) |
- |
0 |
|
- |
|
31 Dec, 2026 |
-
- |
| 11 |
CIPET MYSURU
| IS 12701 (1996) |
Rotational moulded polyethylene water storage tanks - specification (First Revision) |
Upto 20000 litres |
17144 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4.2.3(Carbon Black Content ) |
- |
693.75 |
|
CBC |
| 4.2.3(Carbon Dispersion Test) |
- |
525 |
|
CBD |
| 5(Types and Features ) |
- |
1200 |
|
CL. 4.1.1 density & MFI |
| 5.1 Table 1(Dimensioas of Cylinderical Vertical Tank) |
- |
2512.50 |
|
5.1,5.2,5.3&5.4 & 6.1 |
| 7.1.1(Resistance to Deformation) |
- |
525 |
|
Resistance to Deformation |
| 7.2(Resistance to Impact) |
- |
825 |
|
Resistance to Impact |
| 7.3(Test for Top Load Resistance) |
- |
675 |
|
Test for Top Load Resistance |
| 7.4(Tensile Strength) |
- |
1325 |
|
Tensile Strength |
| 7.5(Flexural Modulus) |
- |
1325 |
|
Flexural Modulus |
| 7.6(overall Migration) |
- |
7537.50 |
|
Cl. 7.6, 9.1, 8.2 & Raw material |
| 5.4(Wall Thickness) |
- |
0 |
|
- |
| 6.1(Finish) |
- |
0 |
|
- |
| 9.2.1(Man-Hole and Hand-Hole Lids) |
- |
0 |
|
- |
| 4.2.2(MFR) |
- |
0 |
|
- |
|
31 Dec, 2026 |
-
- |
| 12 |
CIPET MYSURU
| IS 7834 : Part 8 (1987) |
injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 8 Specific requirements for caps |
- |
7294 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 2.2.2(diameter of the socket of cap) |
- |
375 |
|
For All Dimensions |
| 2.1(General) |
- |
6918.75 |
|
RS.3843 is for addition of (Stress relief test Rs. 525, OpacityRs. 431.25, EOW. Rs.2250, &Short-term hydraulic test Rs. 637.50) Rs. 637.50 for socket fitting . And
Rs. 3075 for raw material ( VCM Content Rs.2250 & K Value Rs. 825) |
| 6.1.1(VCM Content Test) |
- |
0 |
|
- |
|
31 Dec, 2026 |
-
- |
| 13 |
Institute for Auto Parts and Hand Tools Technology
| IS 6149 (1984) |
Specification for single - Ended open - Jaw adjustable wrenches (First Revision) |
All Grade, Type, Size and Designation |
6840 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4 Table-1(Dimensions- Nominal Size) |
- |
1200 |
|
- |
| 4 Table-1(Dimensions- a) |
- |
0 |
|
-- |
| 4 Table-1(Dimensions- b) |
- |
0 |
|
-- |
| 4 Table-1(Dimensions- t) |
- |
0 |
|
-- |
| 4 Table-1(Dimensions- d) |
- |
0 |
|
-- |
| 4 Table-1(Dimensions- Opening of adjustable jaws) |
- |
0 |
|
-- |
| 6(Hardness- Frame, handle and Jaw) |
- |
3560 |
|
Hardness= 400
Coating Thickness- 460
Adhesion Test- 200
Corrosion Resistance- 2000
Workmanship=500 |
| 8(Longitudinal Play of Adjustable Jaw) |
- |
300 |
|
--- |
| 8(Transverse Play of Adjustable Jaw) |
- |
300 |
|
--- |
| 8(Torque) |
- |
500 |
|
--- |
| 5(Chemical Composition) |
- |
980 |
|
- |
|
17 Feb, 2028 |
-
- |
| 14 |
CIPET MYSURU
| IS 12786 (1989) |
Irrigation equipment - Polyethylene pipes for irrigation laterals - Specification |
Diameter - 32 mm |
13325 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4.1.a (Potyethylene - higher olefins constituent ) |
- |
1500 |
|
Potyethylene - higher olefins constituent |
| 7.3(Tensile Test) |
- |
975 |
|
For tensile & Elongation |
| 7.3(Elongation at Break) |
- |
0.00 |
|
included in tensile |
| 7.4(SusceptibiIity to Environmental Stress
Cracking) |
- |
900.00 |
|
E s c r |
| 5 and Table 1(DIMENSIONS OF PIPES - outside diameters) |
- |
0 |
|
For all dim |
| 7.2(Reversion Test) |
- |
825.00 |
|
reversion
Rs. 525 test & RS. 300 Specimen prep |
| 5 and Table 1(DIMENSIONS OF PIPES - wall thickness shall) |
- |
375 |
|
Dimension charges |
| 4.1.c.ii (Toluene extract - Annex A) |
- |
900 |
|
Toluene extract - |
| 4.1.c.iii (Volatile matter - Annex B ) |
- |
900 |
|
Volatile matter |
| 4.1.c & 4.2.a (Carbon Black content - IS 2530 : 1963) |
- |
694 |
|
CBC |
| 4.2.b (The dispersion of Carbon Black content shall be satisfactory - IS 2530 : 1963) |
- |
525.03 |
|
The dispersion of Carbon Black content shall be satisfactory - IS 2530 : 1963 |
| 7.1
Table-2
(b)Acceptance Test for 01 hour at 20°C & 6.9MPa induced stress) |
- |
638 |
|
b) Acceptance Test for 01 hour at 20°C & 6.9MPa induced stress |
| Cl. 7.1 Table -2(Quality Test for 100 hrs @ 70 c & 2.2 Mpa) |
- |
2250.01 |
|
Quality Test for 100 hrs @ 70 c & 2.2 Mpa |
| 6(VISUAL APPEARANCE) |
- |
225 |
|
VISUAL APPEARANCE |
| 4.1.c.i (Density) |
- |
1200 |
|
Density |
| 4.1d(MATERIAL) |
- |
1500 |
|
MATERIAL |
|
31 Dec, 2026 |
-
- |
| 15 |
CIPET MYSURU
| IS 14333 (2022) |
Polyethylene Pipes for Sewerage and Industrial Chemicals and Effluent � Specification (First Revision) |
Diameter upto 400mm |
39545 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 7.4,T3 of IS 4984(Outside Diameter-IS 4984-2016) |
- |
375 |
|
Dimension all |
| 5.2.1,T2("Base Density
(At 27°C Temp.)-IS 7328:2020 ") |
- |
1200 |
|
Density |
| 6.2(Colour- IS 14333-2022) |
- |
225 |
|
Colour |
| 8.1.1, T4(Internal Pressure creep Rupture test, Temperature - 27 oC , Test Period - 100 hrs.-IS 4984-2016 (Annexure-E)) |
- |
2250 |
|
100 hrs Pressure test |
| 8.1.1, T4(Internal Pressure creep Rupture test, Temperature - 80 oC , Test Period - 48 hrs.-IS 4984-2016 (Annexure-E)) |
- |
1200 |
|
48 hrs pressure test |
| 8.2("Longitudinal Reversion Test - IS 4984-2016
(Annexure-F)") |
- |
825 |
|
Reversion |
| 8.6(Density-IS 7328:2020) |
- |
1200.01 |
|
Density |
| 8.4(Melt Flow rate(Temperature - 190oC,Mass 5kg)-IS 2530-1963) |
- |
900 |
|
MFI |
| 8.3(Carbon black content- IS 2530-1963) |
- |
694 |
|
CBC |
| 8.3(Carbon black content Dispersion- IS 2530-1963) |
- |
525 |
|
CBD |
| 7.4,T4 of IS 4984(wall Thickness-IS 4984-2016) |
- |
0 |
|
Dimension |
| 7.4,T3 of IS 4984(Ovality-IS 4984-2016) |
- |
0 |
|
Dimension |
| 5.2.1,T2(Melt Flow Rate (At 190°C /5kg)-IS 2530:1963) |
- |
900 |
|
MFI |
| 5.2.1,T2(Thermal Stability(Oxidation Induction Time)-IS 4984:2016(Annexure-B)) |
- |
1650 |
|
OIT |
| 5.2.1,T2("Volatile Matter- IS 4984:2016
(Annexure-C)") |
- |
900 |
|
Volatile |
| 5.2.1.1, T2(Compound Density-IS 7328:2020) |
- |
525 |
|
Density |
| 5.2.1.1, T2("Compound carbon black -IS 2530:1963
content") |
- |
694.01 |
|
CBC |
| 5.2.1.1, T2(Compound Toluene extract - Any Method) |
- |
900 |
|
Toluene |
| 5.2.1.1, T2(Compound maximum volatile matter -IS 4984:2016 (Annexure-C)) |
- |
900 |
|
Volatile matter |
| 5.2.1.1, T2(Compound ash content - Any Method) |
- |
900 |
|
Ash |
| 5.2.1.1, T2("Compound carbon black -IS 2530:1963
dispersion") |
- |
694 |
|
CBC |
| 5.3(Density of Higher olefin - IS 7328:2020) |
- |
525 |
|
Density |
| 5.3(Loading of Carbon Black - IS 2530:1963) |
- |
694 |
|
Carbon Black |
| 5.3(Ash content- Any Method) |
- |
900 |
|
Ash Content |
| 5.3(Toluene extract - Any Method) |
- |
825 |
|
Toluene |
| 5.3("Maximum volatile matter -IS 4984:2016
(Annexure-C)") |
- |
825 |
|
volatile matter |
| 6(Pipe Description - IS 14333-2022) |
- |
225 |
|
Visual |
| 8.1.1, T4(Internal Pressure creep Rupture test, Temperature - 80 oC , Test Period - 165 hrs.-IS 4984-2016 (Annexure-E)) |
- |
2249.97 |
|
165 hrs.-Internal Pressure creep Rupture test, |
| 8.1.1, T4(Internal Pressure creep Rupture test, Temperature - 80 oC , Test Period - 1000 hrs.-IS 4984-2016 (Annexure-E)) |
- |
8250 |
|
1000 hrs.-Internal Pressure creep Rupture test, |
| 8.1.2, T4(Internal Pressure creep Rupture test, Temperature - 80 oC , Test Period - 48 hrs.-IS 4984-2016 (Annexure-E)) |
- |
1200 |
|
48 hrs.-Internal Pressure creep Rupture test, |
| 8.5(Oxidation Induction Time -IS 4984:2016(Annexure-B)) |
- |
1650.01 |
|
OIT |
| 8.7("Tensile Strength for Butt Fusion - IS 4984-2016
(Annexure-G)") |
- |
975 |
|
Butt Fusion tensile |
| 8.8,T5("Tensile - IS 4984-2016
(Annexure-H)") |
- |
975 |
|
Tensile |
| 8.8,T5("Elongation -IS 4984-2016
(Annexure-H)") |
- |
0 |
|
Included in tensile |
| 8.9(Slow Crack Growth Rate{Internal Pressure creep Rupture test, Temperature - 80±1 oC , Test Pressure – 0.80MPa, Test Period - 500 hrs.-IS 4984-2016 (Annexure-E &J)) |
- |
1200 |
|
Slow Crack Growth Rate |
|
31 Dec, 2026 |
-
- |
| 16 |
CIPET MYSURU
| IS 2508 (2016) |
Polyethylene films and sheets - Specification (Third Revision) |
Films |
24106.25 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 5.1.1(Appearance) |
- |
225 |
|
Test charges after 25% BIS Discount from our actual Approved charges |
| 5.1.2(Film Form) |
- |
0 |
|
Test charges included In Appearance |
| 5.1.3(Odour) |
- |
0 |
|
Test charges included In Appearance |
| 5.1.4(Density, Cl.5 of IS 13360(Part-3/Section-1)) |
- |
375 |
|
Test charges after 25% BIS Discount from our actual Approved charges |
| 5.1.5(Melt Flow Index. Cl 6, 7 of IS 13360(Part-4/Section-1)) |
- |
825 |
|
Test charges after 25% BIS Discount from our actual Approved charges |
| 5.1.6a(Carbon Black Content, Annex-A) |
- |
693.75 |
|
Test charges after 25% BIS Discount from our actual Approved charges |
| 5.1.6b(Ash Content, Annex-A) |
- |
600 |
|
Test charges after 25% BIS Discount from our actual Approved charges |
| 5.1.6c(Carbon Black Dispersion, Cl.16 of IS 2530) |
- |
525 |
|
Test charges after 25% BIS Discount from our actual Approved charges |
| 5.2.2(Tolerance on Thickness, Annex-A) |
- |
187.50 |
|
Test charges after 25% BIS Discount from our actual Approved charges |
| 6.1, Table 1(Tensile strength at break. A) Machine Direction. IS 13360 (Part 5/Sec 1)) |
- |
1075 |
|
Test charges after 25% BIS Discount from our actual Approved charges |
| 6.1, Table 1(Tensile strength at break. B) Transverse Direction. IS 13360 (Part 5/Sec 3)) |
- |
1075 |
|
Test charges after 25% BIS Discount from our actual Approved charges |
| 6.1, Table 1(Ageing test at (70-1)c for 7 days , cl 4 IS 7016 ) |
- |
525 |
|
Test charges after 25% BIS Discount from our actual Approved charges |
| 6.1, Table 1(Elongation at break ,A) Machine direction .IS 13360(Part-5/sec-1) ) |
- |
0 |
|
Test charges included In Tensile properties |
| 6.1, Table 1(Elongation at break ,B) Cross-machine direction..IS 13360(Part-5/sec-3) ) |
- |
0 |
|
Test charges included In Tensile properties |
| 6.1, Table 1(Dartimpact strength Method B of IS 13360 (Part-5/sec-6) ) |
- |
637.50 |
|
Test charges after 25% BIS Discount from our actual Approved charges |
| 6.1, Table 1(Tear resistence. A) Machine direction Annex B) |
- |
825 |
|
Test charges after 25% BIS Discount from our actual Approved charges |
| 6.1, Table 1(Tear resistence. B) Transverse direction ) |
- |
825 |
|
Test charges after 25% BIS Discount from our actual Approved charges |
| 7.1. Table 2(Tensile strength at break A) Machine direction IS 13360 (Part-5/sec-1) ) |
- |
1075 |
|
Test charges after 25% BIS Discount from our actual Approved charges |
| 7.1. Table 2(Tensile strength at break,B) Crosse machine direction IS 13360 (Part-5/sec-3) ) |
- |
1075 |
|
Test charges after 25% BIS Discount from our actual Approved charges |
| 7.1. Table 2(Ageing test at (70-1)c for 7 days , cl 4 IS 7016 ) |
- |
525 |
|
Test charges after 25% BIS Discount from our actual Approved charges |
| 7.1. Table 2(Elongation at break , A) Machine direction IS 13360 (Part-5/sec-3) IS 13360 (Part-5/sec-1) ) |
- |
0 |
|
Test charges included In Tensile properties |
| 7.1. Table 2(Elongation at break , A) Transverse direction IS 13360 (Part-5/sec-3) ) |
- |
0 |
|
Test charges included In Tensile properties |
| 7.1. Table 2(Dart impact strenght , Method A of IS 3360 (Part-5/sec-6) ) |
- |
637.50 |
|
Test charges after 25% BIS Discount from our actual Approved charges |
| 8.1, Table 3(Tensile properties ,A) Yield strenght . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do) |
- |
1075 |
|
Test charges after 25% BIS Discount from our actual Approved charges |
| 8.1, Table 3(Tensile properties , B) Break strenght . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do) |
- |
1075 |
|
Test charges after 25% BIS Discount from our actual Approved charges |
| 8.1, Table 3(Tensile properties ,C) Yield elongation . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do) |
- |
1075 |
|
Test charges after 25% BIS Discount from our actual Approved charges |
| 8.1, Table 3(Tensile properties ,D) Break elongation . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do) |
- |
1075 |
|
Test charges after 25% BIS Discount from our actual Approved charges |
| 8.1, Table 3(Tear resistance , Annex B) |
- |
825 |
|
Test charges after 25% BIS Discount from our actual Approved charges |
| 8.1, Table 3(Puncture resistance , Annex C) |
- |
1075 |
|
Test charges after 25% BIS Discount from our actual Approved charges |
| 9.1, Table 4(Tensile properties ,A) Yield strenght . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do) |
- |
1075 |
|
Test charges after 25% BIS Discount from our actual Approved charges |
| 9.1, Table 4(Tensile properties , B) Break strenght . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do) |
- |
1075 |
|
Test charges after 25% BIS Discount from our actual Approved charges |
| 9.1, Table 4(Tensile properties ,C) Yield elongation . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do) |
- |
1075 |
|
Test charges after 25% BIS Discount from our actual Approved charges |
| 9.1, Table 4(Tensile properties ,D) Break elongation . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do) |
- |
1075 |
|
Test charges after 25% BIS Discount from our actual Approved charges |
| 9.1, Table 4(Tear resistance , Annex B) |
- |
825 |
|
Test charges after 25% BIS Discount from our actual Approved charges |
| 9.1, Table 4(Puncture resistance , Annex C) |
- |
1075 |
|
Test charges after 25% BIS Discount from our actual Approved charges |
| 5.2.1.2(Nominal width) |
- |
0 |
|
- |
|
31 Dec, 2026 |
-
- |
| 17 |
RAMCO RESEARCH AND DEVOLPMENT CENTRE
| IS 12089 (1987) |
Specification for granulated slag for the manufacture portland slag cement |
- |
1000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 3.2(composition of granulated slag, Manganese Oxide) |
- |
1000 |
|
- |
| 3.2(composition of granulated slag, Magnesium Oxide) |
- |
10000 |
|
- |
| 3.2(composition of granulated slag, Sulphide Sulphur) |
- |
220000 |
|
- |
| 3.4(insoluble residue of dried samples) |
- |
220000 |
|
- |
| 4.5(Moisture Content of Granulated Slag) |
- |
32000 |
|
- |
| 3.4.1(glass content ) |
- |
7000 |
|
- |
| 3.3(percentages of major oxides) |
- |
10000 |
|
- |
|
12 Jan, 2028 |
-
- |
| 18 |
JBS TESTING SOLUTIONS PVT LTD
| IS 4824 (2022) |
Bead wires for tyres - Specification |
- |
19700 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| "Clause 6.1 - Table 1"(Carbon) |
- |
5000 |
|
For chemical test |
| "Clause 6.1 - Table 1"(Silicon) |
- |
5000 |
|
For chemical test |
| "Clause 6.1 - Table 1"(Mangnese) |
- |
5000 |
|
For chemical test |
| "Clause 6.1 - Table 1"(Sulphur) |
- |
5000 |
|
For chemical test |
| "Clause 6.1 - Table 1"(Phosphorous) |
- |
5000 |
|
For chemical test |
| "Clause 6.1 - Table 1"(Nitrogen) |
- |
5000 |
|
For chemical test |
| Clause 7.4.1 - Table 5(Protective Coating) |
- |
8200 |
|
For dimensional and other qualitative test |
| Clause 7.4.3 Table 6(Coating Weight) |
- |
8200 |
|
For dimensional and other qualitative test |
| "Clause 7.2.2 and 7.2.3 - Table 3"(Tensile Strength) |
- |
6500 |
|
For mechanical tests |
| "Clause 7.2.2 and 7.2.3 - Table 3"(Minimum Elongation at rupture) |
- |
6500 |
|
For mechanical tests |
| "Clause 7.2.2 and 7.2.3 - Table 3"(0.2 percent proof strength) |
- |
6500 |
|
For mechanical tests |
| "Clause 7.3 - Table 4"(Torsion Test) |
- |
6500 |
|
For mechanical tests |
| Clause 7.4.2(Surface Quality) |
- |
8200 |
|
For dimensional and other qualitative test |
| Clause 7.5.3(Wire Straightness) |
- |
8200.01 |
|
For dimensional and other qualitative test |
| Clause 7.5.4(Residual Torsions) |
- |
6500 |
|
For mechanical tests |
| Clause 7.6.1(Dimensions) |
- |
8200 |
|
For dimensional and other qualitative test |
| Clause 7.6.3(Out of Roundness) |
- |
8200 |
|
For dimensional and other qualitative test |
| Clause 7.6.4(Adhesion Test) |
- |
8200 |
|
For dimensional and other qualitative test |
| 6.2 (Table No.-2)(Chemical composition Permissible variation,(%) C Mn Si P S N) |
- |
5000 |
|
For chemical tests |
| 7.2.1 (Table No.- 3)(Tensile strength,(Mpa) - IS 1608 (Part 1) Elongation,(%)) |
- |
6500 |
|
For mechanical test |
| 7.5.1(Unit package) |
- |
8200 |
|
For dimensional and other qualitative test |
| 7.5.2 (Table No.- 3)(Welds) |
- |
8200 |
|
For dimensional and other qualitative test |
| Cl. 5(Manufacture) |
- |
8200 |
|
For dimensional and other qualitative test |
| Cl 7.2.1, Table 3(Tensile Test) |
- |
6500 |
|
For mechanical tests |
| Cl 7.2.2, Table 3(Elongation) |
- |
6500 |
|
For mechanical tests |
| Cl 7.2.3, Table 3(0.2 Percent Proof strength) |
- |
6499.97 |
|
For mechanical tests |
| Cl 7.3, Table 4(Torsion Test) |
- |
6500 |
|
For mechanical tests |
| Cl 7.4.1, Table 5(Protective Coating) |
- |
8200 |
|
For dimensional and other qualitative test |
| Cl 7.4.2(Surface Quality) |
- |
8200 |
|
For dimensional and other qualitative test |
| Cl 7.4.3, Table 6(Coating Weight) |
- |
8200 |
|
For dimensional and other qualitative test |
| Cl 7.6.1(Dimensions) |
- |
8200 |
|
For dimensional and other qualitative test |
| Cl 7.6.2, Table 7(Size Tolerances) |
- |
8200 |
|
For dimensional and other qualitative test |
| Cl 7.6.3(Out-of-roundness) |
- |
8200 |
|
For dimensional and other qualitative test |
| Cl 7.6.4, Annex A(Requirements for Adhesion) |
- |
8200 |
|
For dimensional and other qualitative test |
| Cl 8.5(Straightness) |
- |
8200 |
|
For dimensional and other qualitative test |
| Cl 8.6(Residual Torsions) |
- |
8200 |
|
For dimensional and other qualitative test |
|
04 Dec, 2028 |
-
Included w.e.f 16.06.2025 |
| 19 |
JBS TESTING SOLUTIONS PVT LTD
| IS 7485 : Part 2 (2018) |
Countersunk flat head screws (common head style) with type H or Type Z Cross Recess - Product Grade A part 2 Steel Screws of Property Class 8.8, Stainless Steel Screws and Non - Ferrous Metal Screws ( Third Revision) |
- |
19400 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 3(Dimensions) |
- |
8000 |
|
For complete dimension and other qualitative tests |
| 4, table 2(Material) |
- |
5000 |
|
For chemical testing |
| 4, table 2(Thread) |
- |
7999.99 |
|
For complete dimension and other qualitative tests |
| 4, table 2(Mechanical property) |
- |
6400 |
|
For mechanical tests |
| 4, table 2(Tolerances) |
- |
8000 |
|
For complete dimension and other qualitative tests |
| 4, table 2(Cross recess) |
- |
8000 |
|
For complete dimension and other qualitative tests |
| 4, table 2(Finish - coating) |
- |
8000 |
|
For complete dimension and other qualitative tests |
| 4, table 2(Surface integrity) |
- |
8000 |
|
For complete dimension and other qualitative tests |
| 4, table 2(Acceptability) |
- |
8000 |
|
For complete dimension and other qualitative tests |
| 5(Designation) |
- |
8000 |
|
For complete dimension and other qualitative tests |
|
04 Dec, 2028 |
-
Included w.e.f 16.06.2025 |
| 20 |
EDWARD FOOD RESEARCH & ANALYSIS CENTRE LIMITED
| IS 13334 : Part 2 (2014) |
Skimmed milk powder - Specification: Part 2 extra grade (First Revision) |
- |
4475 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Table 1 (i)(Moisture (IS 116231or 16072)) |
- |
200 |
|
NA |
| Table 1 (ii)(Milk protein in milk solids not fat (IS 72192)) |
- |
200 |
|
NA |
| Table 1 (iii)(Milk fat (IS 117213) or Annex B) |
- |
300 |
|
NA |
| Table 1 (iv)(Insolubility index (IS 12759)) |
- |
325 |
|
NA |
| Table 1 (v)(Total ash (on dry basis), Annex B of IS 14433) |
- |
300 |
|
NA |
| Table 1 (vi)(Titratable acidity (IS 11766)) |
- |
250 |
|
NA |
| Table 1 (vii)(Lactate content (IS 11202)) |
- |
200 |
|
NA |
| Table 1 (viii)(Scorched particles (equivalent to Disc B) (IS 13500)) |
- |
650 |
|
NA |
| Table 1 (ix)(Bacterial count (IS 5402)) |
- |
250 |
|
NA |
| Table 1 (x)(Coliform count (IS 5401 - Part 1)) |
- |
250 |
|
NA |
| Table 1 (xi)(Escherichia coli (IS 5887 - Part 1)) |
- |
250 |
|
NA |
| Table 1 (xii)(Coagulase positive Staphylococcus aureus (IS 5887 - Part 2)) |
- |
250 |
|
NA |
| Table 1 (xiii)(Salmonella (IS 5887 - Part 3)) |
- |
250 |
|
NA |
| Table 1 (xiv)(a)(Spore Count: a)Aerobic (Bacillus cereus) Type m (IS 5887 - Part 6)) |
- |
250 |
|
NA |
| Table 1 (xiv)(b)(Spore Count: b) Anaerobic (Sulfite reducing Clostridia) Type m (ISO 15213 : 2003)) |
- |
250 |
|
NA |
| Table 1 (xv)(Listeria monocytogenes (IS 14988 - Part 2 : 2001)) |
- |
250 |
|
NA |
|
07 Oct, 2025 |
-
- |
| 21 |
EDWARD FOOD RESEARCH & ANALYSIS CENTRE LIMITED
| IS 13334 : Part 1 (2014) |
Skimmed milk powder - Specification: Part 1 standard grade (Second Revision) |
- |
4450 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4(Description) |
- |
100 |
|
NA |
| 5.6(Moisture) |
- |
200 |
|
NA |
| 5.6(Milk protein in milk solids not fat) |
- |
200 |
|
NA |
| 5.6(Milk fat) |
- |
200 |
|
NA |
| 5.6(Insolubility index) |
- |
700 |
|
NA |
| 5.6(Total ash (on dry basis)) |
- |
300 |
|
NA |
| 5.6(Titratable acidity (lactic acid)) |
- |
250 |
|
NA |
| 5.6(Scorched particles) |
- |
650 |
|
NA |
| 5.6(Bacterial count) |
- |
250 |
|
NA |
| 5.6(Coliform count ) |
- |
250 |
|
NA |
| 5.6(Escherichia coli) |
- |
250 |
|
NA |
| 5.6(Coagulase positive Staphylococcus aureus) |
- |
250 |
|
NA |
| 5.6(Salmonella) |
- |
250 |
|
NA |
| 5.6(Spore count, Aerobic (Bacillus cereus)) |
- |
250 |
|
NA |
| 5.6(Spore count, Anaerobic (Sulfite reducing Clostridia)) |
- |
250 |
|
NA |
| 5.6(Listeria monocytogenes) |
- |
250 |
|
NA |
| 5.2(Absence of extraneous matter, added colour and added flavour) |
- |
250 |
|
NA |
| Cl 5.3(Calcium chloride,
citric acid and sodium citrate, sodium salts of
orthophosphoric acid and polyphosphoric acid (as
linear phosphate), ) |
- |
250 |
|
NA |
| Cl 5.4(The flavour of the product or of the reconstituted
milk shall be pleasant and clean (see IS 10030).) |
- |
250 |
|
NA |
|
07 Oct, 2025 |
-
- |
| 22 |
NAWaL Analytical Labs India Private Limited
| IS 13334 : Part 2 (2014) |
Skimmed milk powder - Specification: Part 2 extra grade (First Revision) |
Extra grade |
9250 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Table 1 (i)(Moisture (IS 116231or 16072)) |
- |
600 |
|
18% GST extra |
| Table 1 (ii)(Milk protein in milk solids not fat (IS 72192)) |
- |
600 |
|
18% GST extra |
| Table 1 (iii)(Milk fat (IS 117213) or Annex B) |
- |
600 |
|
18% GST extra |
| Table 1 (iv)(Insolubility index (IS 12759)) |
- |
600 |
|
18% GST extra |
| Table 1 (v)(Total ash (on dry basis), Annex B of IS 14433) |
- |
600 |
|
18% GST extra |
| Table 1 (vi)(Titratable acidity (IS 11766)) |
- |
600 |
|
18% GST extra |
| Table 1 (vii)(Lactate content (IS 11202)) |
- |
1050 |
|
18% GST extra |
| Table 1 (viii)(Scorched particles (equivalent to Disc B) (IS 13500)) |
- |
600 |
|
18% GST extra |
| Table 1 (ix)(Bacterial count (IS 5402)) |
- |
500 |
|
18% GST extra |
| Table 1 (x)(Coliform count (IS 5401 - Part 1)) |
- |
500 |
|
18% GST extra |
| Table 1 (xi)(Escherichia coli (IS 5887 - Part 1)) |
- |
500 |
|
18% GST extra |
| Table 1 (xii)(Coagulase positive Staphylococcus aureus (IS 5887 - Part 2)) |
- |
500 |
|
18% GST extra |
| Table 1 (xiii)(Salmonella (IS 5887 - Part 3)) |
- |
500 |
|
18% GST extra |
| Table 1 (xiv)(a)(Spore Count: a)Aerobic (Bacillus cereus) Type m (IS 5887 - Part 6)) |
- |
500 |
|
18% GST extra |
| Table 1 (xiv)(b)(Spore Count: b) Anaerobic (Sulfite reducing Clostridia) Type m (ISO 15213 : 2003)) |
- |
500 |
|
18% GST extra |
| Table 1 (xv)(Listeria monocytogenes (IS 14988 - Part 2 : 2001)) |
- |
500 |
|
18% GST extra |
| Table 1 (xiv)(a)(Spore Count: a) Aerobic (Bacillus cereus) Type M (IS 5887 - Part 6)) |
- |
0 |
|
0 |
| Table 1 (xiv)(b)(Spore Count: b) Anaerobic (Sulfite reducing Clostridia) Type M (ISO 15213 : 2003)) |
- |
0 |
|
0 |
|
21 Mar, 2028 |
-
- |
| 23 |
NAWaL Analytical Labs India Private Limited
| IS 13334 : Part 1 (2014) |
Skimmed milk powder - Specification: Part 1 standard grade (Second Revision) |
Standard Grade |
8300 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 5.6(Scorched particles) |
- |
500 |
|
18% GST extra |
| 5.6(Titratable acidity (lactic acid)) |
- |
500 |
|
18% GST extra |
| 5.6(Total ash (on dry basis)) |
- |
500 |
|
18% GST extra |
| 5.6(Insolubility index) |
- |
500 |
|
18% GST extra |
| 5.6(Milk fat) |
- |
1100 |
|
18% GST extra |
| 5.6(Milk protein in milk solids not fat) |
- |
500 |
|
18% GST extra |
| 5.6(Listeria monocytogenes) |
- |
500 |
|
18% GST extra |
| 5.6(Spore count, Anaerobic (Sulfite reducing Clostridia)) |
- |
500 |
|
18% GST extra |
| 5.6(Spore count, Aerobic (Bacillus cereus)) |
- |
500 |
|
18% GST extra |
| 5.6(Salmonella) |
- |
500 |
|
18% GST extra |
| 5.6(Coagulase positive Staphylococcus aureus) |
- |
500 |
|
18% GST extra |
| 5.6(Escherichia coli) |
- |
500 |
|
18% GST extra |
| 5.6(Coliform count ) |
- |
500 |
|
18% GST extra |
| 5.6(Bacterial count) |
- |
500 |
|
18% GST extra |
| 5.6(Moisture) |
- |
500 |
|
18% GST extra |
|
21 Mar, 2028 |
-
- |
| 24 |
JBS TESTING SOLUTIONS PVT LTD
| IS 7485 : Part 1 (2018) |
Countersunk Flat Head Screws (Common head Style) With Type H or Type Z Cross Recess - Product Grade A Part 1 Steel Screws of Property Class 4.8 ( Third Revision) |
- |
19400 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 3(Dimensions) |
- |
8000 |
|
For complete dimension and other qualitative tests |
| 4, table 2(Material) |
- |
5000 |
|
For chemical testing |
| 4, table 2(General requirements) |
- |
8000 |
|
For complete dimension and other qualitative tests |
| 4, table 2(Thread) |
- |
8000 |
|
For complete dimension and other qualitative tests |
| 4, table 2(Mechanical property) |
- |
6400 |
|
For mechanical tests |
| 4, table 2(Tolerances) |
- |
8000 |
|
For complete dimension and other qualitative tests |
| 4, table 2(Cross recess) |
- |
8000 |
|
For complete dimension and other qualitative tests |
| 4, table 2(Finish - coating) |
- |
8000.01 |
|
For complete dimension and other qualitative tests |
| 4, table 2(Surface integrity) |
- |
8000.03 |
|
For complete dimension and other qualitative tests |
| 4, table 2(Acceptability) |
- |
8000 |
|
For complete dimension and other qualitative tests |
| 5(Designation) |
- |
8000 |
|
For complete dimension and other qualitative tests |
|
04 Dec, 2028 |
-
Included w.e.f 16.06.2025 |
| 25 |
JBS TESTING SOLUTIONS PVT LTD
| IS 13983 (1994) |
Stainless Steel Sinks For Domestic Purposes |
- |
19500 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 9(Marking) |
- |
1000 |
|
For other qualitative test |
| 4(Type) |
- |
1000 |
|
For other qualitative test |
| Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-04-Cr-19-Ni-19 (Numeric Symbol 304)(Carbon Content) |
- |
5000 |
|
For chemical test |
| Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-04-Cr-19-Ni-19 (Numeric Symbol 304)(Silicon Content) |
- |
5000 |
|
For chemical test |
| Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-04-Cr-19-Ni-19 (Numeric Symbol 304)(Manganese Content) |
- |
5000 |
|
For chemical test |
| Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-04-Cr-19-Ni-19 (Numeric Symbol 304)(Nickel Content) |
- |
5000 |
|
For chemical test |
| Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-04-Cr-19-Ni-19 (Numeric Symbol 304)(Chromium Content) |
- |
5000 |
|
For chemical test |
| Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-04-Cr-19-Ni-19 (Numeric Symbol 304)(Sulphur Content) |
- |
5000 |
|
For chemical test |
| Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-04-Cr-19-Ni-19 (Numeric Symbol 304)(Phouphorous Content) |
- |
5000 |
|
For chemical test |
| Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-04-Cr-19-Ni-19 (Numeric Symbol 304)(Nitrogen Content) |
- |
5000 |
|
For chemical test |
| Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-07-Cr-18-Ni-9 (Numeric Symbol 302)(Carbon Content) |
- |
5000 |
|
For chemical test |
| Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-07-Cr-18-Ni-9 (Numeric Symbol 302)(Silicon Content) |
- |
5000 |
|
For chemical test |
| Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-07-Cr-18-Ni-9 (Numeric Symbol 302)(Manganese Content) |
- |
5000 |
|
For chemical test |
| Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-07-Cr-18-Ni-9 (Numeric Symbol 302)(Nickel Content) |
- |
5000 |
|
For chemical test |
| Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-07-Cr-18-Ni-9 (Numeric Symbol 302)(Chromium Content) |
- |
5000 |
|
For chemical test |
| Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-07-Cr-18-Ni-9 (Numeric Symbol 302)(Sulphur Content) |
- |
5000 |
|
For chemical test |
| Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-07-Cr-18-Ni-9 (Numeric Symbol 302)(Phouphorous Content) |
- |
5000 |
|
For chemical test |
| Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-07-Cr-18-Ni-9 (Numeric Symbol 302)(Nitrogen Content) |
- |
5000 |
|
For chemical test |
| 6(Thickness of sheet/strip) |
- |
5000 |
|
For chemical test |
| 6(Depth of bowl) |
- |
13500 |
|
For dimensional and tolerance tests |
| 6(Internal dimensions of the bowl) |
- |
13500 |
|
For dimensional and tolerance tests |
| 6(Bowl locating limits) |
- |
13499.98 |
|
For dimensional and tolerance tests |
| 6(Co-ordinating sizes) |
- |
13500 |
|
For dimensional and tolerance tests |
| 7.1(Consruction and workmanship) |
- |
1000 |
|
For other qualitative test |
| 7.1.1(Consruction and workmanship) |
- |
1000 |
|
For other qualitative test |
| 7.2(Consruction and workmanship) |
- |
1000 |
|
For other qualitative test |
| 7.2.1(Consruction and workmanship) |
- |
1000 |
|
For other qualitative test |
| 7.3(Drainers) |
- |
1000 |
|
For other qualitative test |
| 7.4(Waste outlet) |
- |
1000 |
|
For other qualitative test |
| 7.5(Tap holes) |
- |
1000 |
|
For other qualitative test |
| 7.6(Overflows) |
- |
1000 |
|
For other qualitative test |
| 8(Finish) |
- |
1000 |
|
For other qualitative test |
| 5(MATERIALS) |
- |
1000 |
|
For other qualitative test |
| 6.1.1(Thickness of Sheet/Strip) |
- |
13500 |
|
For dimensional and tolerance tests |
| 6.1.2(Thickness of Sheet/Strip) |
- |
13500 |
|
For dimensional and tolerance tests |
| 6.2(Depth of Bowls) |
- |
13500 |
|
For dimensional and tolerance tests |
| 6.3(Internal Dimensions of Bowls) |
- |
13500 |
|
For dimensional and tolerance tests |
| 6.4.1(Bowl Locating Limits) |
- |
13500 |
|
For dimensional and tolerance tests |
| 6.5(Coordinating Sizes) |
- |
13500 |
|
For dimensional and tolerance tests |
| 7.1(CONSTRUCTION AND WORKMANSHIP) |
- |
1000 |
|
- |
| 7.1.1(CONSTRUCTION AND WORKMANSHIP) |
- |
1000 |
|
- |
| 7.2.1(CONSTRUCTION AND WORKMANSHIP) |
- |
1000 |
|
- |
| 7.3(CONSTRUCTION AND WORKMANSHIP) |
- |
1000 |
|
- |
| 7.4(Waste Outlet) |
- |
1000 |
|
- |
| 7.5(Tap Holes) |
- |
1000.01 |
|
- |
| 7.6(OVERFLOW) |
- |
13500.02 |
|
- |
| Clause no. 4(types) |
- |
1000 |
|
- |
| Caluse no. 5("Material -Austenitic stainless steel of
Grade Designation") |
- |
13500.01 |
|
- |
| Clause no. 6.1(Thickness of sheet) |
- |
13500.03 |
|
- |
| Clause no. 6.2(Depth of Bowls) |
- |
13500 |
|
- |
| Clause no. 6.3(Internal dimensions of bowls) |
- |
13500 |
|
- |
| Clause no. 6.4(Bowl Locating Limits) |
- |
13500 |
|
- |
| Clause no. 6.5, Table No. 1(Dimension of the sink) |
- |
13500 |
|
- |
| Clause no. 7(Construction and workmanship) |
- |
1000.02 |
|
- |
| Clause no. 8(Finish) |
- |
1000 |
|
- |
| Clause no. 9(Mark) |
- |
1000 |
|
- |
|
04 Dec, 2028 |
-
Included w.e.f 16.06.2025 |
| 26 |
BIS, Central Laboratory (CL)
| IS 1538 (1993) |
Cast iron fittings for pressure pipes for water, gas and sewage - Specification (Third Revision) |
- |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4.1 (The metal used for the manufacture of pipe shall be of a quality not less than that specified for grade FG 150 of IS 210 ) |
- |
|
|
|
|
- |
-
- |
| 27 |
CIPET MYSURU
| IS 13487 (1992) |
Irrigation equipment - Emitters - Specification |
- |
6150 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 7.1(Construction and workmanship) |
- |
225 |
|
Construction and workmanship |
| 7.2(Flow path in emitters) |
- |
225 |
|
Flow path in the emitter |
| 7.3.1(Resistance to Hydrostatic pressure) |
- |
750 |
|
Resistance to Hydrostatic pressure |
| 7.3.2(Resistance to Hydrostatic pressure) |
- |
750 |
|
Resistance to Hydrostatic pressure |
| 7.4.1(Emitter Pull Out In-line emitters) |
- |
750 |
|
Emitter Pull Out In-line emitters |
| 8.1.2(Uniformity of Emission Rate Unregulated emitters) |
- |
750 |
|
Uniformity of Emission Rate Unregulated emitters |
| 8.1.3(Uniformity of Emission Rate Regulated emitters) |
- |
749.98 |
|
Uniformity of Emission Rate Regulated emitters |
| 8.2.2(Emission rate as a function of inlet pressure Unregulated emitters) |
- |
750 |
|
Emission rate as a function of inlet pressure Unregulated emitters |
| 8.2.3(Emission rate as a function of inlet pressure Regulated emitters) |
- |
750 |
|
Emission rate as a function of inlet pressure Regulated emitters |
| 8.3(Determination of Emitter Exponent) |
- |
450 |
|
Determination of Emitter Exponent |
|
31 Dec, 2026 |
-
- |
| 28 |
CIPET MYSURU
| IS 13488 (2008) |
Irrigation equipment - Emitting pipe systems - Specification (First Revision) |
CATEGORY A/B/ |
14532 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 5.1.2 (Ref. Cl 4.1.a of IS 12786 : 1989)(Potyethylene - higher olefins constituent ) |
- |
1500 |
|
Polyethylene - Material |
| 5.1.2 (Ref. Cl 4.1.c.ii of IS 12786 : 1989)(Toluene extract - Annex A of IS 12786:1989) |
- |
750.01 |
|
Toluene extract - Annex A of IS 12786:1989 |
| 5.1.2 (Ref. Cl 4.1.c.iii of IS 12786 : 1989)(Volatile matter - Annex B of IS 12786:1989) |
- |
525 |
|
Volatile matter - Annex B of IS 12786:1989 |
| 5.1.2 (Ref. Cl 4.1.c & 4.2.a of IS 12786 : 1989)(Carbon Black content - IS 2530 : 1963) |
- |
694 |
|
Carbon Black content - IS 2530: 1963 |
| 5.1.2 (Ref. Cl 4.2.b of IS 12786 : 1989)(The dispersion of Carbon Black content shall be satisfactory - IS 2530 : 1963) |
- |
525 |
|
CBD |
| 6.2.2(Fittings) |
- |
225 |
|
Visual |
| 6.3(General) |
- |
225 |
|
Visual |
| 8.1.2(Uniformity of Emission Rate for Unregulated Emitting Pipes) |
- |
750 |
|
Uniformity of Emission Rate for Unregulated Emitting Pipes |
| 8.1.3(Uniformity of Emission Rate for Regulated Emitting Pipes) |
- |
749.98 |
|
Uniformity of Emission Rate for Regulated Emitting Pipes |
| 8.2(Emission Rate of Emitting Unit as a Function of Inlet Pressure) |
- |
750 |
|
Emission Rate of Emitting Unit as a Function of Inlet Pressure |
| 8.3.1(Wall Thickness ofEmitting Pipe) |
- |
188 |
|
Wall Thickness ofEmitting Pipe |
| 8.3.2(Inside Diameter ofEmitting Pipe) |
- |
188 |
|
Inside Diameter ofEmitting Pipe |
| 8.3.3(Flow Paths in Emitting Unit) |
- |
188 |
|
Flow Paths in Emitting Unit |
| 8.3.4(Spacing ofEmitter Units) |
- |
300 |
|
Spacing ofEmitter Units |
| 8.4(Resistance of Emitting Pipes to Hydrostatic
Pressure) |
- |
750 |
|
Resistance of Emitting Pipes to Hydrostatic
Pressure |
| 8.4.2(Resistance to Hydrostatic Pressure at Elevated Temperature) |
- |
750 |
|
Resistance to Hydrostatic Pressure at Elevated Temperature |
| 8.5(Resistance to Tension at Elevated Temperature) |
- |
1200 |
|
resistance to Tension at Elevated Temperature |
| 8.6(Resistance to Pull Out of Joints Between Fitting and Emitting
IS 13479) |
- |
300 |
|
Resistance to Pull Out of Joints Between Fitting and Emitting
IS 13479 |
| 8.7.1(Acceptance Test) |
- |
900 |
|
Acceptance Test |
| 8.7.2(Type Test) |
- |
1200 |
|
Type Test |
| 8.8(Determination of Emitting Unit Exponen) |
- |
450 |
|
Determination of Emitting Unit Exponenent |
| 9.1(Non-regulated Emitting Pipe) |
- |
225 |
|
non-regulated Emitting Pipe |
| 9.2(Regulated Emitting Pipe) |
- |
225.02 |
|
Regulated Emitting Pipe |
| 8.2(Emission Rate of Emitting Unit as a Function
of Inlet Pressure) |
- |
1000 |
|
- |
|
31 Dec, 2026 |
-
- |
| 29 |
CIPET MYSURU
| IS 13592 (2013) |
Unplasticized Polyvinyl Chloride (PVC-U) Pipes for Soil and Waste Discharge System Inside and Outside Buiildings Including Ventilation and Rainwater System |
- |
15400 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 14(Marking) |
- |
0 |
|
- |
| Cl6.3(The composition shall be based on PVC resin
having a K-value of 64 or greater when tested in
accordance with IS 4669) |
- |
825 |
|
K value |
| Cl.7.1(Mean outside diameter, outside diameter at any point
for Type A and Type B pipes
manufactured plain or with socket shall be as given in
Table 1. Dimensions shall be measured according to
the method given in IS 12235 (Part 1).) |
- |
375 |
|
Dimensions |
| Cl.7.1( outside diameter at any point
for Type A and Type B pipes
manufactured plain or with socket shall be as given in
Table 1. Dimensions shall be measured according to
the method given in IS 12235 (Part 1).) |
- |
0 |
|
Dimensions |
| Cl.7.1( wall thickness at any point
for Type A and Type B pipes
manufactured plain or with socket shall be as given in
Table 1. Dimensions shall be measured according to
the method given in IS 12235 (Part 1).) |
- |
0 |
|
Dimensions |
| Cl.7.3.1(Minimum wall thickness of socket on pipes shall
be as given in Table 2 read with Fig. 2 and Fig. 3.) |
- |
0 |
|
Dimensions |
| Cl.7.3.2(Dimensions of sockets for solvent cementing and
grooved sockets of pipes shall be as given in Tables 3
and 4 respectively, read with Fig. 2 and 3.) |
- |
0 |
|
Dimensions |
| Cl.8.1(The internal and external surface of the pipes shall be
smooth and clean, and free from grooving and other
defects. The end shall be clearly cut and shall be square
with the axis of the pipe. The end may be chamfered
on the plain side.) |
- |
225 |
|
Visual Appearance |
| Cl8.3(This test shall be carried out for socket end pipes only.
When tested by the method described in IS 12235
(Part 6), the test specimens shall not show blisters,
excessive delamination or cracking or signs of weld
line splitting.) |
- |
525 |
|
Stress Relief test |
| Cl.8.2(When tested by the method described in IS 12235
(Part 5), a length of pipe sample of 200 ± 20 mm shall
not alter in length by more than 5 percent. In the case
of socket ended pipes, this test shall be carried out on
the plain portion of pipe taken at least 100 mm away
from the root of the socket.) |
- |
825 |
|
Reversion |
| Cl.8.4(When determined in accordance with IS 12235 (Part 2),
the vicat softening temperature of the specimen shall
not be less than 79°C.) |
- |
8025 |
|
VST |
| Cl.8.5(After the required
period of exposure, the tensile strengths of two samples when tested as per IS 12235 (Part 13) shall not show
difference of more than 20 percent of their initial tensile
strengths) |
- |
3500 |
|
Effect Of sunlight |
| Cl. 9, IS 12235 Part 7(Resistance to Sulphuric Acid) |
- |
2000 |
|
Resistance to Sulphuric Acid |
| Cl.10.1(When tested by method prescribed in IS 12235 (Part 9),the pipe shall have a true impact rate of not more than
10 percent. Mass of striker and height of fall shall be
as per Annex A.) |
- |
1125 |
|
Res to External Blow |
| Cl.10.2(When determined in accordance with the method
described in IS 12235 (Part 13), the tensile strength at
break shall not be less than 45 MPa.) |
- |
2450 |
|
Tensile Before & After Exposure |
| Cl.10.3(The axial shrinkage shall not exceed 2 percent when
determined in accordance with Annex B.) |
- |
825 |
|
Axial Shrinkage |
| Cl.11.(Jointing of solvent
cementing joints is to be carried out using solvent
conforming to IS 14182.
Apply a pressure of 0.05 MPa for a period of 15 min
and there should be no leakage at any joint.) |
- |
750 |
|
Water tightness of joints |
| Cl. 12, IS 12235 Part 11(Resistance to Di-Chloro-Methane) |
- |
750 |
|
Resistance to DCM |
| 8.6(Effect on Water Test) |
- |
2250 |
|
EOW |
|
31 Dec, 2026 |
-
- |
| 30 |
CIPET MYSURU
| IS 4985 (2021) |
UNPLASTICIZED PVC PIPES FOR POTABLE WATER SUPPLIES SPECIFICATION Fourth Revision |
up to 400mm |
23656 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 11.2(Resistance to External Blows at 0°C) |
- |
1000 |
|
Resistance to External Blows at 0°C |
| 11.1-Table 6(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test)) |
- |
637.50 |
|
(Acceptance Test) |
| 11.1-Table 7(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Type Test)-for Integral Sealing Ring Sockets) |
- |
637.50 |
|
MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Type Test)-for Integral Sealing Ring Sockets |
| 11.1.1(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test)-for Plumbing pipes) |
- |
637.50 |
|
MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test)-for Plumbing pipes |
| 10.6(PHYSICAL AND CHEMICAL CHARACTERISTICS- Density) |
- |
525 |
|
Density |
| 10.5(PHYSICAL AND CHEMICAL CHARACTERISTICS- Vicat Softening Temperature) |
- |
825 |
|
Vicat Softening Temperature |
| 10.4(PHYSICAL AND CHEMICAL CHARACTERISTICS- Reversion Test) |
- |
825 |
|
Reversion Test |
| 10.2(PHYSICAL AND CHEMICAL CHARACTERISTICS-Opacity) |
- |
575 |
|
Opacity |
| 10.1(PHYSICAL AND CHEMICAL CHARACTERISTICS-Visual Appearance) |
- |
225 |
|
-Visual Appearance |
| 9.1(PIPE ENDS) |
- |
0 |
|
PIPE ENDS |
| 8(SEALING RINGS) |
- |
0 |
|
SEALING RINGS |
| 10.7(Sulphated Ash Content) |
- |
900 |
|
Sulphated Ash Content |
| 7(DIMENSIONS-PIPE-Nominal Diameter) |
- |
500 |
|
DIMENSIONS-PIPE- All |
| 7.1.1.1(DIMENSIONS-PIPE-Mean O.D. (Minimum)) |
- |
0 |
|
Mean O.D. (Minimum) |
| 7.1.1.2(DIMENSIONS-PIPE-O.D. at any Point (Minimum)) |
- |
0 |
|
DIMENSIONS-PIPE-O.D. at any Point (Minimum) |
| 7.1.1.2(DIMENSIONS-PIPE-Ovality (Maximum)) |
- |
0 |
|
DIMENSIONS-PIPE-Ovality (Maximum) |
| 7.1.2.1(DIMENSIONS-PIPE-Thickness(Minimum)) |
- |
0 |
|
DIMENSIONS-PIPE-Thickness(Minimum) |
| 7.1.2.1(DIMENSIONS-PIPE-Average Thickness) |
- |
0 |
|
DIMENSIONS-PIPE-Average Thickness |
| 7.2.1(DIMENSIONS-Socket) |
- |
0 |
|
DIMENSIONS-Socket |
| 6.1.1(VCM Content) |
- |
2250 |
|
VCM Content |
| 6.1.2(PVC Resin) |
- |
825 |
|
K Value |
| 10.3(Effect on Water Test) |
- |
2250 |
|
Effect on Water Test |
| 10.1(Colour) |
- |
225 |
|
Colour |
| 10.1(Surface Finish) |
- |
0 |
|
Surface Finish |
| 7.2.1.1 Table3(Angle of taper (Note-1)) |
- |
0 |
|
Angle of taper (Note-1) |
|
31 Dec, 2026 |
-
- |
