BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

15123 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

13981

BIS, Central Laboratory (CL)

None

IS 12766 (1997)

Paper, computer - Specification (First Revision)

7466 View breakup
Rs.7466, except cl.4.1.2 and cl.4.2 for which testing charges shall be as per relevant ISS

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1.1 (Grammage ( Substance ) )	-
4.5 (Size)	-
4.6 Table 1 S.no.i) (Bulk )	-
4.6 Table 1 S.no.ii) (Moisture)	-
4.6 Table 1 S.no.iii) (Ash,)	-
4.6 Table 1 S.no.iv) (Tesile Indec CD)	-
4.6 Table 1 S.no.iv) (Tesile Indec MD)	-
4.6 Table 1 S.no.v) (Burst index)	-
4.6 Table 1 S.no. vi ) (Tear Index Average of CD & MD)	-
4.6 Table 1 S.no. vii) (One minute cobb test)	-
4.6 Table 1 S.no. vi ) (Tear Index Average of CD & MD)	-
4.6 Table 1 S.no.x) (Smoothness)	-

-
IS is withdrawn. Revisied IS of 2023 is now available.;

13982

BIS, Central Laboratory (CL)

None

IS 11744 (1986)

PecificatiOn for phosphorous pentachloride, technical

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl no . 2.1 (Description)	-
Cl no . 2.2 APPENDIX A -2 [Table 1 Sl no. (i)] (Phosphorous pentachloride ( as PCl 5),)	-
Cl no . 2.2 APPENDIX A -3 Table 1 Sl no. (i)] (Bulk density)	-

-
-

13983

BIS, Central Laboratory (CL)

None

IS 11673 : Part 2 (2019)

Sodium hypochlorite solution - Specification: Part 2 water treatment use (Second Revision)

Rs.18022/ View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl. 4.3, Table-1, Sr.no. 1 (Relative density (at 25o/25oC))	-
Cl. 4.3, Table-1, Sr.no. 2 (Available Chlorine(as Cl2))	-
Cl. 4.3, Table-1, Sr.no. 3 (Total Chlorine(as Cl2))	-
Cl. 4.3, Table-1, Sr.no. 4 (Free alkali( as NaOH),)	-
Cl. 4.3, Table-1, Sr.no. 5 (Free Sodium Carbonate (as Na2CO3))	-
Cl. 4.3, Table-1, Sr.no. 6 (Iron (as Fe))	-
Cl. 4.3, Table-1, Sr.no. 7 (Sodium Chlorate ( as NaClO3),)	-
Cl. 4.3, Table-1, Sr.no. 8 (Lead (as Pb))	-
Cl. 4.3, Table-1, Sr.no. 9 (Arsenic (as As))	-
Cl. 4.3, Table-1, Sr.no. 10 (Mercury (as Hg))	-
Cl. 4.3, Table-1, Sr.no. 11 (Manganese (as Mn))	-
Cl. 4.3, Table-1, Sr.no. 12 (Total chromium (as Cr))	-
Cl. 4.3, Table-1, Sr.no. 13 (Cadmium (as Cd))	-
Cl. 4.3, Table-1, Sr.no. 14 (Selenium (as Se))	-

-
Facility is complete for this IS;

13984

BIS, Central Laboratory (CL)

None

IS 11673 : Part 1 (2019)

Sodium hypochlorite solution - Specification: Part 1 household and industrial use (Second Revision)

11900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl. No. 5.1 (Description Grade 1 & 2)	-
Cl. No. 5.3, table no. 1, Sl no. 1 (Relative density, Grade 1, Annex -A)	-
Cl. No. 5.3, table no. 1, Sl no. 1 (Relative density, Grade 2, Annex -A)	-
Cl. No. 5.3, table no. 1, Sl no. 2 (Available chlorine (as Cl₂), Grade 1, Annex B)	-
Cl. No. 5.3, table no. 1, Sl no. 2 (Available chlorine (as Cl₂), Grade 2, Annex B)	-
Cl. No. 5.3, table no. 1, Sl no. 3 (Total chlorine (as Cl₂), Grade 1, Annex C)	-
Cl. No. 5.3, table no. 1, Sl no. 3 (Total chlorine (as Cl₂), Grade 2, Annex C)	-
Cl. No. 5.3, table no. 1, Sl no. 4 (Free alkali (as NaOH), Grade 1, Annex D)	-
Cl. No. 5.3, table no. 1, Sl no. 4 (Free alkali (as NaOH), Grade 2, Annex D)	-
Cl. No. 5.3, table no. 1, Sl no. 5 (Free sodium carbonate (as Na₂CO₃), Grade 1, Annex E)	-
Cl. No. 5.3, table no. 1, Sl no. 5 (Free sodium carbonate (as Na₂CO₃), Grade 2, Annex E)	-
Cl. No. 5.3, table no. 1, Sl no. 6 (Iron (as Fe), Grade 1, Annex F)	-
Cl. No. 5.3, table no. 1, Sl no. 6 (Iron (as Fe), Grade 2, Annex F)	-
Cl. No. 5.3, table no. 1, Sl no. 7 (Sodium chlorate (as NaClO₃), Grade 1, Annex G)	-
Cl. No. 5.3, table no. 1, Sl no. 7 (Sodium chlorate (as NaClO₃), Grade 2, Annex G)	-

-
Facility is complete for this IS;

13985

BIS, Central Laboratory (CL)

None

IS 11087 (1986)

Specification for paper for magnetic ionk character recognition cheque printing (First Revision)

Rs.5355.0 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.1 (Description )	-
3.3 (Substance)	-
Clause 3.6 Table 1; Sl. No. i,ii, iii, iv, v, vi. (Smoothness)	-
Clause 3.6 Table 1; Sl. No. i,ii, iii, iv, v, vi. (Porosity)	-
Clause 3.6 Table 1; Sl. No. i,ii, iii, iv, v, vi. (Tearing strength)	-

-
Test facility is not available for mentioned exclusion parameters; Excluding Smoothness, Porosity, Opacity, Stiffness;

13986

BIS, Central Laboratory (CL)

None

IS 8041 (1990)

Rapid hardening portland cement - Specific4tion (Second Revision)

Please see remarks View breakup
Testing charges for the product are: Including Transverse Strength (optional test) test 9,100.00 Excluding Transverse Strength (optional test) test 7,900.00 -Testing charges for only chemical test report: 4,300.00 -Testing charges for only physical test report including optional tests: 4,800.00 -Testing charges for only physical test report excluding optional tests: 3,600.00

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6.1 (Fineness 4031 Part 2)	-
6.2.1 (Expansion by Le Chatelier- 4031 Part 3)	-
6.2.1 (Expansion by Autoclave- 4031 Part 3)	-
6.3 a) (Setting Time Initial- 4031 Part 5)	-
6.3 b) (Setting Time Final- 4031 Part 5)	-
6.4 a) (Compressive Strength At 24 hrs ± 30 minutes - IS 4031 Part 6)	-
6.4 b) (Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-

-
-

13987

BIS, Central Laboratory (CL)

None

IS 14887 (2014)

Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sacks for packaging of 50 kg food grains – Specification (first revision)

19750 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.2 (Tapes – Width and Thickness ( IS 6192/IS 11197))	-
3.3.1 (Bottom seam (IS 10789))	-
4.1 and 3.4 (Mass of bale (Cl. 4.1), Capacity (Cl 3.4))	-
4.2 and Table 1 ii (Dimensions )	-
3.2 (Tapes – Width and Thickness ( IS 6192/IS 11197))	-
4.2 and Table 1 v (Mass of sack )	-

-
Excluding TF not available for 1. Average breaking strength and elongation at break before and after UV radiation and weathering, 2. Linear density/Denier, 3. Tenacity in g/Tex;

13988

BIS, Central Laboratory (CL)

None

IS 9873 : Part 3 (2017)

Safety of toys: Part 3 migration of certain elements (Second Revision)

Rs.14080/ View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1 - Table 1 (Antimony (Sb) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-
4.1 - Table 1 (Arsenic (As) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-
4.1 - Table 1 (Barium (Ba) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-
4.1 - Table 1 (Cadmium (Cd) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-
4.1 - Table 1 (Chromium (Cr) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-
4.1 - Table 1 (Lead (Pb) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-
4.1 - Table 1 (Mercury (Hg) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-
4.1 - Table 1 (Selenium (Se) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-
4.1 - Table 1 (Antimony (Sb) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-
4.1 - Table 1 (Arsenic (As) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-
4.1 - Table 1 (Barium (Ba) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-
4.1 - Table 1 (Cadmium (Cd) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-
4.1 - Table 1 (Chromium (Cr) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-
4.1 - Table 1 (Lead (Pb) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-
4.1 - Table 1 (Mercury (Hg) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-
4.1 - Table 1 (Selenium (Se) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-

-
2 piece

13989

BIS, Central Laboratory (CL)

None

IS 7320 (1974)

Specificaiton for concrete slump test apparatus

Rs/-300 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Table 1 (Internal Dimension of mould)	-
Fig 2(Cl3.1 to 3.3) (Construction)	-

-
-

13990

BIS, Central Laboratory (CL)

None

IS 9157 (1979)

Specification for sodium nitrate and potassium nitrate for glass compositions

1125 for Sodium nitrate, Pota nitrate each View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.1 (Description)	-
3.2 Table 1 i (Moisture and volatile matter)	-
3.2 Table 1 ii (Matter insoluble in water)	-
3.2 Table 1 iii (Carbonates)	-
3.2 Table 1 iv (Nitrites)	-
3.2 Table 1 v (Chlorides)	-
3.2 Table 1 vi (Sulphates)	-
3.2 Table 1 vii (Copper)	-
3.2 Table 1 viii (Iron)	-
3.2 Table 1 ix (Manganese)	-
3.2 Table 1 x (Potassium Compounds)	-
3.2 Table 1 xi (Sodium Compounds)	-
3.2 Table 1 xii (Sodium nitrate)	-
3.2 Table 1 xiii (Potassium nitrate)	-

-
-

13991

BIS, Central Laboratory (CL)

None

IS 1264 (1997)

Brass gravity die castings - Specification (Fourth Revision)

1435.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.0 (Freedom from defects)	-
9.0 (Pressure test)	-
6.0 (Shape)	-
7.0 (Cu)	-
7.0 (Sn)	-
7.0 (Pb)	-
7.0 (Ni)	-
7.0 (Fe)	-
7.0 (Al)	-
7.0 (Mn)	-
7.0 (Si)	-
7.0 (Total impurities excluding Ni Pb Al Zn)	-

-
Sample size shall be minimum dia> 3mm and thickness > 0.8 mm;

13992

BIS, Central Laboratory (CL)

None

IS 8887 (2018)

Bitumen emulsion for roads (Cationic Type) - Specification (Third Revision)

Rs.7855/- (for grade SS-2) View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6.6.2 Table-1; 1(i) (Residue on 600 micron IS Sieve, (Grad RS-1) IS 8, Annex 9)	-
6.6.2 Table-1; 1(i) (Residue on 600 micron IS Sieve, (Grad RS-2) Annex 9)	-
6.6.2 Table-1; 1(i) (Residue on 600 micron IS Sieve, (Grad MS) Annex 9)	-
6.6.2 Table-1; 1(i) (Residue on 600 micron IS Sieve, (Grad SS-1) Annex 9)	-
6.6.2 Table-1; 1(i) (Residue on 600 micron IS Sieve, (Grad SS-2) Annex 9)	-
6.6.2 Table-1; 1(viii) (Miscibility with water (Grade RS-1) Annex H)	-
6.6.2 Table-1; 1(viii) (Miscibility with water (Grade RS-2) Annex H)	-
6.6.2 Table-1; 1(viii) (Miscibility with water (Grade MS) Annex H)	-
6.6.2 Table-1; 1(viii) (Miscibility with water (Grade SS-1) Annex H)	-
6.6.2 Table-1; 1(viii) (Miscibility with water (Grade SS-2) Annex H)	-
6.6.2 Table-1; 1(ix) 1 (Tests on residue: Residue by evaporation (Grade RS-1) Annex J)	-
6.6.2 Table-1; 1(ix) 1 (Tests on residue: Residue by evaporation (Grade RS-2) Annex J)	-
6.6.2 Table-1; 1(ix) 1 (Tests on residue: Residue by evaporation (Grade MS) Annex J)	-
6.6.2 Table-1; 1(ix) 1 (Tests on residue: Residue by evaporation (Grade SS-1) Annex J)	-
6.6.2 Table-1; 1(ix) 1 (Tests on residue: Residue by evaporation (Grade SS-2) Annex J)	-
6.6.2 Table-1; 1(ix) 4 (Tests on residue: Solubility I tricholoethylne, (Grade RS-1) IS 1216)	-
6.6.2 Table-1; 1(ix) 4 (Tests on residue: Solubility I tricholoethylne, (Grade RS-2) IS 1216)	-
6.6.2 Table-1; 1(ix) 4 (Tests on residue: Solubility I tricholoethylne, (Grade MS) IS 1216)	-
6.6.2 Table-1; 1(ix) 4 (Tests on residue: Solubility I tricholoethylne, (Grade SS-1) IS 1216)	-
6.6.2 Table-1; 1(ix) 4 (Tests on residue: Solubility I tricholoethylne, (Grade SS-2) IS 1216)	-

-
Excluding viscosity by saybolt furol viscometer, Determination of coagulation of emulsion at low temperature, Storage stability, Particle charge, Coating ability and water resistance, Stability to mixing with cerment,Penetration, ductility,Distillation in percent volume of distillate recovered at 360 degree celsius, Water content;

13993

BIS, Central Laboratory (CL)

None

IS 5950 (1984)

Specification for shot firing cables (For Use Other Than In Shafts) (First Revision)

11030 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.1 (Conductor : Material -IS : 8130-2013)	-
4.1 (Insulation : Material -IS : 5831-1984)	-
5.1 (Sheath : materail IS : 5831-1984)	-
6.1 (Conductor : Construction IS : 8130-2013)	-
7.1 (Insulation : Application )	-
7.2 (Thickness of Insulation - average )	-
7.2 (Thickness of Insulation - Min. )	-
7.3 (Colour of Insulation)	-
8.1, 9.1 (c) (Nominal radial thickness of sheath)	-
8.2 (Thickness of Sheath - min.)	-
8.3 (Colour of Sheath)	-
9.1 a) (Annealing test)	-
9.1 b) (Conductor resistance test)	-
9.1 d) i) (Insulation : Tensile strength)	-
9.1 d) i) (Insulation : elongation at break)	-
9.1 d) i) (Sheath : Tensile strength)	-
9.1 d) i) (Sheath : elongation at break)	-
9.1 d) ii) (Ageing in air oven - Insulation : Tensile strength)	-
9.1 d) ii) (Ageing in air oven - Insulation : Tensile strength Variation)	-
9.1 d) ii) (Ageing in air oven - Insulation : elongation at break)	-
9.1 d) ii) (Ageing in air oven - Insulation : elongation variation at break)	-
9.1 d) ii) (Ageing in air oven - Sheath : Tensile strength)	-
9.1 d) ii) (Ageing in air oven - Sheath : Tensile strength variation )	-
9.1 d) ii) (Ageing in air oven - Sheath : elongation at break)	-
9.1 d) ii) (Ageing in air oven - Sheath : elongation variation at break)	-
9.1 d) iii ) (Loss of mass test - insulation )	-
9.1 d) iii ) (Loss of mass test - Sheath )	-
9.1 d) iv ) (Hot deformation - insulation )	-
9.1 d) iv ) (Hot deformation - sheath )	-
9.1 d) v ) (Heat shock - insulation )	-
9.1 d) v ) (Heat shock - Sheath )	-
9.1 d) vi ) (Shrinkage - insulation )	-
9.1 d) vi ) (Shrinkage : Crack observed - insulation )	-
9.1 d) vi ) (Shrinkage - Sheath )	-
9.1 d) vi ) (Shrinkage: Crack observed - Sheath )	-
10.2 (Voltage test )	-
9.1 f) (Insulation resistance test: Volume resistivity )	-
9.1 f) (Insulation resistance test : IR constant)	-
10.4 (Flammability Test )	-
11.1 (Manufacturer’s Identification)	-

-
-

13994

BIS, Central Laboratory (CL)

None

IS 5430 (2017)

Ammonia preserved concentrated natural rubber latex (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1 (Colour)	-
4.2 (Odour)	-
4.3 ( Table 1) (1. Dry rubber content,(Type HA, Type MA, Type LA))	-
4.3 ( Table 1) (2. Non-rubber solids ,(Type HA, Type MA, Type LA))	-
4.3 ( Table 1) (3. Coagulum content, (Type HA, Type MA, Type LA))	-
4.3 ( Table 1) (4. Sludge content (Type HA, Type MA, Type LA))	-
4.3 ( Table 1) (5. Alkalinity as ammonia, ( Type HA) )	-
4.3 ( Table 1) (5. Alkalinity as ammonia, ( Type MA)	-
4.3 ( Table 1) (5. Alkalinity as ammonia, ( Type LA) )	-
4.3 ( Table 1) (6. KOH number (Type HA, Type MA, Type LA))	-
4.3 ( Table 1) (7. Mechanical stability, (Type HA, Type MA, Type LA))	-
4.3 ( Table 1) (8. Volatile fatty acid number (Type HA, Type MA, Type LA))	-
4.3 ( Table 1) (9. Copper content,(Type HA, Type MA, Type LA))	-
4.3 ( Table 1) (10. Manganese content (Type HA, Type MA, Type LA))	-

-
Excluding Volatile fatty acid number parameter;

13995

BIS, Central Laboratory (CL)

None

IS 2041 (2009)

Steel plates for pressure vessels used at moderate and low temperature - Specification (Third Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 9 (Workmanship)	-
Cl 10 (Length, Width & Thickness)	-
Cl 12.1 (UTM)	-
Cl 12.2 (Press)	-
Cl 12.3 (Load Impact )	-
Table 1,Cl.7.1 (Grade:- R220, R260,R 275,R355,H 235,H265, H295,H355) (Carbon-IS 228)	-
Table 1,Cl.7.1 (Grade:- R220, R260,R 275,R355,H 235,H265, H295,H355) (Sulphur-IS 228)	-
Table 1,Cl.7.1 (Grade:- R220, R260,R 275,R355,H 235,H265, H295,H355) (Phosphorous-IS 228)	-
Table 1,Cl.7.1 (Grade:- R220, R260,R 275,R355,H 235,H265, H295,H355) (Manganese-IS228)	-
Table 1,Cl.7.1 (Grade:- R220, R260,R 275,R355,H 235,H265, H295,H355) (Silicon-IS 228)	-
Table 1,Cl.7.1 (Grade:- R220, R260,R 275,R355,H 235,H265, H295,H355) (Aluminium-IS 228)	-
Table 1,Cl.7.1 (Grade:- R220, R260,R 275,R355,H 235,H265, H295,H355) (Nitrogen- IS 228)	-
Table 1,Cl.7.1 (Grade:- R 275,R355,H 235,H265, H295,H355) (Niobium)	-
Table 1,Cl.7.1 (Grade:- R 275,R355,H 235,H265, H295,H355) (Vanadium)	-
Table 1,Cl.7.1 (Grade:- R 275,R355,H 235,H265, H295,H355) (Titanium)	-
Table 1,Cl.7.1 (Grade:- R 275,R355,H 235,H265, H295,H355) (Chromium-IS 228)	-
Table 1,Cl.7.1 (Grade:- R 275,R355,H 235,H265, H295,H355) (Copper-IS 228)	-
Table 1,Cl.7.1 (Grade:- R 275,R355,H 235,H265, H295,H355) (Molybdenum-IS 228)	-
Table 1,Cl.7.1 (Grade:- R 275,R355,H 235,H265, H295,H355) (Nickel-IS 228)	-
Table 1,Cl.7.1 (Grade:- R 275,R355,H 235,H265, H295,H355) (Vanadium+Niobium+ Titanium)	-

-
Sample size shall be minimum dia> 3mm and thickness > 0.8 mm;

13996

BIS, Central Laboratory (CL)

None

IS 1856 (2005)

Steel wire ropes for haulage purposes - Specification (Third Revision)

Rs. 4500/- and testing charges as per referred Iss View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4- Tables 1 to 4 (Diameter)	-
5- Tables 1 to 4 (Breakiing Force of Rope with Fiber Core)	-
5- Tables 1 to 4 (Breakiing Force of Rope with Steel Core)	-
6.2.1 (Joints)	-
6.2.2 (Joints)	-
6.3 (Lay)	-
6.4- Tables 1 to 4 (Mass of Rope with Fiber core)	-
6.4- Tables 1 to 4 (Mass of Rope with Steel core)	-
6.5 (Preforming)	-
7 (Uniformity of Znic coating - IS 1835 & IS 2366)	-
7 (Mass of Znic Coating - IS 1835 & IS 6745)	-
Clause-7 (CARBON)	-
Clause-7 (SULPHUR)	-
Clause-7 (PHOSPHURS)	-
Clause-7 (MANGANESE)	-
Clause-7 (SILICON)	-
Clause-7 (ALUMINIUM)	-
Clause-7 (NITROGEN)	-

-
Sample size shall be minimum dia> 3mm and thickness > 0.8 mm; Excluding only C & S tested for dia < 3mm; Cl 5 - Minimum Breaking Force (Only for size from 18 mm to 22 mm)

13997

BIS, Central Laboratory (CL)

None

IS 4989 (2018)

Foam concentrate for producing mechanical foam for fire fighting - Specification (Fourth Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl. 4.1, Table 1, Sr. No. 1 (Visual Examination )	-
Cl. 4.1, Table 1, Sr. No. 2 (Freezing and thrawing)	-
Cl. 4.1, Table 1, Sr. No. 3 (pH (Original Sample))	-
Cl. 4.1, Table 1, Sr. No. 3 (pH (ageing Sample))	-
Cl. 4.1, Table 1, Sr. No. 4 (Miscibility with distilled water)	-
Cl. 4.1, Table 1, Sr. No. 7 (Sludge content)	-

-
Excluding Viscosity, pour point, surface tension, Spreading coeeficient, expansion , 25 % drainge time, Fire test on hydrocarbon fire, Fire test on polar solvent fire ,;

13998

BIS, Central Laboratory (CL)

None

IS 4835 (1979)

Specification Polyvinyl Acetate Dispersion Based Adhesives for Wood

Please see remarks. View breakup
Rs. 1899.00 + testing charges as per referred ISS (excluding Glue joint strength, Early strength development, Stability, Working consistency, Temperature of set, Resistance to sustained load)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl. 6.1 (Solid Resin content, B-3)	-
Cl. 6.2 (Ash content, B-4)	-
Cl. 6.3 (pH value, B-5)	-
Cl. 6.4 (Bulk density, B-6)	-

-
-

13999

BIS, Central Laboratory (CL)

None

IS 1759 (1986)

Specification for powrahs (Second Revision)

Rs.2100 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
2.1 (Shapes)	-
2.1 (Dimensions of Powrah-A)	-
2.1 (Dimensions of Powrah-B)	-
2.3 (Blade thickness)	-
4 (Mass)	-
6.1 (Workmanship & Finish)	-
10.1 (Drop test)	-

-
-

14000

BIS, Central Laboratory (CL)

None

IS 398 : Part 5 (1992)

Aluminium conductor for overhead transmission purposes - Specification: Part 5 aluminium conductors - Galvanized steel - Reinforced for extra high voltage (400 KV And Above) (First Revision)

Rs 11400/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
7 (elec) (Freedom from defects)	-
13.8 (elec) (Resistance test-Aluminium wire before Stranding)	-
14.8 (elec) (Resistance test-Aluminium wire after stranding)	-
13.2 (Visual Examination)	-
13.3 (Diameter(mm), Aluminium wire)	-
13.3 (Diameter(mm), Aluminium wire)	-
13.3 (Diameter(mm), Steel Wire)	-
13.3 (Diameter(mm), Steel Wire)	-
10 (Stranding)	-
10 (Stranding, Direction of Outermost layer)	-
10 (Stranding, Ratio of diameter of Aluminium)	-
10.2, table 4 (Lay Ratio, Aluminium Wire Outer of Layer)	-
10.2, table 4 (Lay Ratio, Aluminium Wire, Layer immediately)	-
10.2, table 4 (Lay Ratio, Aluminium Wire, Inner most layer of three Aluminium wire)	-
10.2, table 4 (Lay Ratio, Steel wire, (6 wire layar))	-
13.5.2 (Breaking Load, Aluminium wire(Before Stranding))	-
13.5.2 (Breaking Load, Steel wire (Before Stranding))	-
13.5.2 (Breaking Load Steel wire (After Stranding))	-
13.5.2 (Breaking Load Aluminium wire (After Stranding))	-
13.6 ("Ductility Test on steel wire, Torsion Test ")	-
13.6 (Ductility Test on steel wire, Torsion Test)	-
13.6 (Ductility Test on steel wire, Elongation Test)	-
13.6 (Ductility Test on steel wire, Elongation Test)	-
13.7 (Wrapping Test, Aluminium wire)	-
13.7 (Wrapping Test, Steel wire)	-
13.9 (Galvanizing Test on steel wire, uniformity of coating)	-
13.9 (Galvanizing Test on steel wire, uniformity of coating)	-
13.9 (Galvanizing Test on steel wire,Weight of zinc coating)	-
13.9 (Galvanizing Test on steel wire,Weight of zinc coating)	-
9 (Joint in wires,)	-
9 (Joint in wires,)	-

-
Test facility not available for Breaking load on complete conductor , surface condition test, corona test & radio interference voltage test

14001

BIS, Central Laboratory (CL)

None

IS 15155 (2002)

Bar/wire wrapped steel cylinder pipes with mortar lining and coating (Including Specials) - Specification

3000 View breakup
Rs 3000/- + charges as per relevant ISS excluding Design, Hydrostatic Test and Permeability test on coating

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 5 (DIMENSIONS AND TOLERANCES)	-
Cl 10 ( WORKMANSHIP AND FINISH)	-

-
-

14002

BIS, Central Laboratory (CL)

None

IS 1729 (2002)

Cast iron/ductile iron drainage pipes and pipe fittings for over ground non-pressure pipeline socket and spigot series (Second Revision)

Rs. 2850/- and testing charges as per referred Iss View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.1 (Tensile Strrngth - IS1608(Pt-1))	-
5.1 (0.2 % proof stress - IS 1608(pt-1))	-
5.1 (Elongation - IS 1608(Pt-1))	-
5.3 (Casting Defects)	-
5.4 (Hardness- IS 1500)	-
6 (Hammer Test - IS1729)	-
8.2-Table 1 to 32 (Dimension, a)	-
8.2-Table 1 to 32 (Dimension, b)	-
8.2-Table 1 to 32 (Dimension, c)	-
11 (Coating Test at 65degree Celcius )	-
11 (Coating Test at 0degree Celcius)	-

-
Since the composition of cast iron shall be left to the discretion ofthe manufacturer , as such element to be tested with specified requirement and tolerances if any may please be declared with method of testing. Sample Size 5 pcs of 5x5 cm having dia> 3mm and thickness > 0.8 mm.; Excluding -; Cl 7 - Leakage Test

14003

BIS, Central Laboratory (CL)

None

IS 16014 (2018)

Mechanically woven, double - Twisted, hexagonal wire mesh gabions, revet mattresses, rock fall netting and other products for civil engineering purposes (Galvanized Steel Wire Or Galvanized Steel Wire With Polymer Coating) - Specification (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.1.1 (MATERIALS AND MANUFACTURE)	-
5.1.2 (MATERIALS AND MANUFACTURE)	-
5.2 (MATERIALS AND MANUFACTURE)	-
5.3 (MATERIALS AND MANUFACTURE)	-
5.4 (MATERIALS AND MANUFACTURE)	-
5.4.1 (Galvanized Rings)	-
5.4.2 (Stainless Steel Fasteners)	-
6.1 (Tensile Strength)	-
7.1.1 (Mass of Zinc Coating )	-
8.1,Table 1,2,3,4,5,6,i (Mesh wire dia)	-
8.1,Table1,2,3,4,5,6,ii (Edge/Selvedge wire dia)	-
8.1,Table1,2,3,4,5,6,iii (Lacing wire dia)	-
8.1,Table1,2,3,4,5,6,iv (Polymer coating thickness,)	-
8.1,Table1,2,3,4,5,6,v (Typical sizes Length × Width × Height (m))	-
9 (WORKMANSHIP)	-
Clause - 5, 5.1, 5.1.1, 5.1.2, 5.4, 5.4.1, 5.4.2 (CARBON)	-
Clause - 5, 5.1, 5.1.1, 5.1.2, 5.4, 5.4.1, 5.4.2 (SULPHUR)	-
Clause - 5, 5.1, 5.1.1, 5.1.2, 5.4, 5.4.1, 5.4.2 (PHOSPHURS)	-
Clause - 5, 5.1, 5.1.1, 5.1.2, 5.4, 5.4.1, 5.4.2 (MANGANESE)	-
Clause - 5, 5.1, 5.1.1, 5.1.2, 5.4, 5.4.1, 5.4.2 (SILICON)	-
Clause - 5, 5.1, 5.1.1, 5.1.2, 5.4, 5.4.1, 5.4.2 (ALUMINIUM)	-
Clause - 5, 5.1, 5.1.1, 5.1.2, 5.4, 5.4.1, 5.4.2 (NITROGEN)	-
Clause 7.1.1 (Mass of Zinc/Zinc Alloy Coating)	-

-
Sample size shall be minimum dia> 3mm and thickness > 0.8 mm; Excluding Except Coating; Cl 6.2 - Mesh Panel Strength, Cl 7.2 - Polymer for Coating

14004

BIS, Central Laboratory (CL)

None

IS 398 : Part 4 (1994)

Aluminium conductors for overhead transmission purposes: Part 4 aluminium alloy stranded conductors (Aluminium - Magnesium - Silicon Type) - Specification (Third Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6.1 (Freedom from Defects)	-
7.1 Table-1 (Dimensional measurement of wires)	-
7.2.2 Table-2, Table-4 (Calculated resistance of Stranded Conductor)	-
8.1 (Joints in wires-Conductors Containing Seven Wires)	-
8.2 (Joints in wires-Conductors Containing More Than Seven Wires)	-
9.1 (Stranding)	-
9.2 Table 3 (Lay Ratio of stranded conductors)	-
9.3 (Direction of Lay)	-
9.4 (Multiple layers of wires)	-
11 (Packing and Marking)	-
12.2 Table 1 (Breaking Load Test- Before Stranding)	-
12.2 Table 1 (Breaking Load Test- After Stranding)	-
12.3 Table 1 (Elongation Test- Before Stranding)	-
12.3 Table 1 (Elongation Test- After Stranding)	-
12.4 Table 1 (Resistance of Aluminium wire)	-
9.2 (Lay Ratio 24 wire layer)	-
9.2 (Lay Ratio 18 wire layer)	-
9.2 (Lay Ratio 12 wire layer)	-
9.2 (Lay Ratio 3/6 wire layer)	-
7.2.1 (Sizes)	-

-
-

14005

CIPET, Hyderabad

6111634

IS 16208 (2015)

Textiles - High density polyethylene (HDPE)/polypropylene (PP) woven sacks for packaging 10 kg, 15 kg, 20 kg, 25 kg and 30 kg foodgrains - Specification

17155 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(TYPES)	-	0	25% discount on test charges for BIS
4.1(Raw Material)	-	1050	25% discount on test charges for BIS
4.2(Tapes – Width IS 6192 and IS 11197)	-	250	25% discount on test charges for BIS
4.2(Tapes – Linear Density )	-	500	25% discount on test charges for BIS
4.2(Construction)	-	300	25% discount on test charges for BIS
4.3(Sacks)	-	300	25% discount on test charges for BIS
4.3.1( The two rows of stitches shall be separated from each other)	-	300	25% discount on test charges for BIS
4.3.1(Bottom Seam)	-	300	25% discount on test charges for BIS
4.3.1( The outer stitch)	-	300	25% discount on test charges for BIS
4.3.1( The stitching shall be done with double fold over seam to a depth )	-	300	25% discount on test charges for BIS
4.3.1(Stitches pass through a minimum of six layers of the fabric. )	-	300	25% discount on test charges for BIS
4.3.1(The number of stitches/dm)	-	300	25% discount on test charges for BIS
4.3.2(Mouth)	-	300	25% discount on test charges for BIS
4.4 and Table 1 i(Capacity)	-	250	25% discount on test charges for BIS
5.2 and Table 1 ii a(Dimensions Inside Length)	-	250	25% discount on test charges for BIS
5.2 and Table 1 ii b(Dimensions Inside Width)	-	250	25% discount on test charges for BIS
5.2 and Table 1 iii(Ends per dm )	-	250	25% discount on test charges for BIS
5.2 and Table 1 iv(Picks per dm )	-	250	25% discount on test charges for BIS
5.1 and Table 1 v(Mass of sack )	-	250	25% discount on test charges for BIS
5.2 and Table 1 vi a(Average breaking strength of fabric Lengthwise )	-	1100	25% discount on test charges for BIS
5.2 and Table 1 vi b(Average breaking strength of fabric Widthwise )	-	1100	25% discount on test charges for BIS
5.2 and Table 1 viii a(Elongation at break of fabric Lengthwise)	-	1100	25% discount on test charges for BIS
5.2 and Table 1 viii b(Elongation at break of fabric Widthwise )	-	1100	25% discount on test charges for BIS
5.2 and Table 1 ix(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	11280	25% discount on test charges for BIS
5.2 and Table 1 vi(Breaking strength of bottom seam )	-	1100	25% discount on test charges for BIS
5.2 and Table 1 x(Ash content )	-	950	25% discount on test charges for BIS

23 Feb, 2027

-
-

14006

CIPET, Hyderabad

6111634

IS 15907 (2010)

Agro textiles – High density polyethylene (HDPE) woven beds for vermiculture – Specification

36293 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.3(Cord Beading - IS 15907)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
5.1(MANUFACTURE- IS 15907)	-	300	25% DISCOUNT ON TEST CHARGES FOR BIS
5.2.1(Lamination- IS 15907)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
5.2.1(Thickness of coating film- method A of IS 13162 (Part 3))	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
5.2.1(Lamination- IS 15907)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
5.2.2(Lamination- IS 15907)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
5.2.2(Lamination- IS 15907)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
5.2.2(coating thickness of the sandwich lamination- method A of IS 13162 (Part 3))	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
5.3.1(Construction- IS 15907)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
5.3.1(Construction- IS 15907)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
5.3.1(Construction- IS 15907)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
5.3.1(The width of the hem - IS 15907)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
5.3.1(Construction- IS 15907)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
5.3.1(Construction- IS 15907)	-	2000	25% DISCOUNT ON TEST CHARGES FOR BIS
5.3.1(Construction- IS 15907)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
5.3.1(Construction- IS 15907)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
5.3.2(Construction- IS 15907)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
5.3.2(Construction- IS 15907)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
5.3.2(Finished width of pocket - IS 15907)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
5.3.2(Construction- IS 15907)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
5.4(Bonding- IS 15907)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
6- Table 1- SL.No (i)(Mass)	-	500	25% DISCOUNT ON TEST CHARGES FOR BIS
6- Table 1- SL.No (ii)(Breaking strength before UV exposure,warp - IS 1969 )	-	1300	25% DISCOUNT ON TEST CHARGES FOR BIS
6- Table 1- SL.No (ii)(Breaking strength before UV exposure,weft - IS 1969 )	-	1300	25% DISCOUNT ON TEST CHARGES FOR BIS
6- Table 1- SL.No (iii)(Elongation at break of fabric- IS 1969)	-	1300	25% DISCOUNT ON TEST CHARGES FOR BIS
6- Table 1- SL.No (iv)(Retention of breaking strength after UV exposure, - Annex B of IS 15907 and IS 1969)	-	8020	25% DISCOUNT ON TEST CHARGES FOR BIS
6- Table 1- SL.No (v)(Welded seam strength before UV exposure- IS 1969)	-	1300	25% DISCOUNT ON TEST CHARGES FOR BIS
6- Table 1- SL.No (vi)(Welded seam strength after UV exposure- Annex B of IS 15907 and IS 1969)	-	6920	25% DISCOUNT ON TEST CHARGES FOR BIS
6- Table 1- SL.No (vii)(Tear strength, Warp - Method A2 of IS 7016 (Part 3))	-	1300	25% DISCOUNT ON TEST CHARGES FOR BIS
6- Table 1- SL.No (vii)(Tear strength, Weft - Method A2 of IS 7016 (Part 3))	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
6- Table 1- SL.No (viii)(Puncture strength - Annex C of IS 15907)	-	1300	25% DISCOUNT ON TEST CHARGES FOR BIS
6- Table 1- SL.No (ix)(Environmental stress cracking test - Annex D of IS 15907)	-	1300	25% DISCOUNT ON TEST CHARGES FOR BIS
6- Table 1- SL.No (x)(Resistance to chemicals, change in the mass - Annex E of IS 15907)	-	2100	25% DISCOUNT ON TEST CHARGES FOR BIS
6- Table 1- SL.No (xi)(Colour fastness to artificial light -IS 2454)	-	1700	25% DISCOUNT ON TEST CHARGES FOR BIS
6- Table 1- SL.No (xii)(Bursting pressure-IS 1966)	-	1300	25% DISCOUNT ON TEST CHARGES FOR BIS
6.1(Length -IS 15907)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
6.1(Width - IS 15907)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
6.1(Height - IS 15907)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
6.2(Water Proofness,IS 7941)	-	1000	25% DISCOUNT ON TEST CHARGES FOR BIS
6.2(Water Proofness, IS 7940)	-	4300	25% DISCOUNT ON TEST CHARGES FOR BIS
5.3.2(Construction- IS 15907)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS

23 Feb, 2027

-
-

14007

CIPET, Hyderabad

6111634

IS 15351 (2015)

Agro textiles – Laminated high density polyethylene (HDPE) woven geomembrane for water proof lining – Specification (second revision)

199569 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(HDPE Tapes)	-	4375	25% DISCOUNT ON TEST CHARGES FOR BIS
3.2(HDPE Fabric)	-	2250	25% DISCOUNT ON TEST CHARGES FOR BIS
5(MANUFACTURE)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
5.1(Lamination)	-	4125	25% DISCOUNT ON TEST CHARGES FOR BIS
5.2(Panel Width)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
5.3(Joints/Seams)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
5.1.1 and 6.2(Thickness, mm- IS 7016: Part 1)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
5.1.1 and 6.2(Mass, g/sq m)	-	500	25% DISCOUNT ON TEST CHARGES FOR BIS
5.1.1 and 6.2(Length)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
5.1.1 and 6.2(Width)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
5.1.1 and 6.2(Carbon black content, Percent- IS 2530)	-	925	25% DISCOUNT ON TEST CHARGES FOR BIS
5.1.1 and 6.2(Breaking Load on 20 cm X 10 cm Strip, Min )	-	2600	25% DISCOUNT ON TEST CHARGES FOR BIS
5.1.1 and 6.2(Strain at Maximum load, Percent-IS 13162 (Part 5)	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
Table-1(Breaking load on 20 × 10 cm strip, N, Min after)	-	2200	25% DISCOUNT ON TEST CHARGES FOR BIS
5.1.1 and 6.2( U.V exposure of 1000 h for warp and weft)	-	178100	25% DISCOUNT ON TEST CHARGES FOR BIS
5.1.1 and 6.2(Impact failure load, at 1524 mm drop,)	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
5.1.1 and 6.2(Tear resistance, N, Min-Method A1 of IS 7016 (Part 3))	-	1300	25% DISCOUNT ON TEST CHARGES FOR BIS
5.1.1 and 6.2(Puncture resistance, N, Min-Annex D)	-	1300	25% DISCOUNT ON TEST CHARGES FOR BIS
5.1.1 and 6.2(Bursting strength (Ball burst),N/cm², Min-)	-	1000	25% DISCOUNT ON TEST CHARGES FOR BIS
5.1.1 and 6.2(Seam strength before UV exposure (N/mm), Min-IS 15060)	-	2600	25% DISCOUNT ON TEST CHARGES FOR BIS
Table-1(Seam strength after UV exposure N/mm, Min-Annex B and IS 15060)	-	2200	25% DISCOUNT ON TEST CHARGES FOR BIS
5.1.1 and 6.2(Hydrostatic resistance-Annex E)	-	1300	25% DISCOUNT ON TEST CHARGES FOR BIS
Table-1(Hydrostatic resistance after UV exposure of 1000 h -Annex B and Annex E)	-	1300	25% DISCOUNT ON TEST CHARGES FOR BIS
5.1.1 and 6.2(Ash content, percent, Max-Annex F)	-	950	25% DISCOUNT ON TEST CHARGES FOR BIS

23 Feb, 2027

-
-

14008

CIPET, Hyderabad

6111634

IS 14968 (2015)

Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sacks for packing 50 Kg/25 kg sugar – Specification (first revision)

17268 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(TYPES)	-	0	25% discount on test charges for BIS
4.1(Raw Material)	-	1050	25% discount on test charges for BIS
4.2(Tapes – Width IS 6192 and IS 11197)	-	250	25% discount on test charges for BIS
4.2(Tapes – Linear Density )	-	500	25% discount on test charges for BIS
4.2(Construction)	-	300	25% discount on test charges for BIS
4.3(Sacks)	-	300	25% discount on test charges for BIS
4.3.1(Bottom Seam)	-	250	25% discount on test charges for BIS
4.3.1(The two rows of stitches shall be separated from each other)	-	250	25% discount on test charges for BIS
4.3.1( The outer stitch)	-	250	25% discount on test charges for BIS
4.3.1( The stitching shall be done with double fold over seam to a depth )	-	250	25% discount on test charges for BIS
4.3.1(Stitches pass through a minimum of six layers of the fabric. )	-	250	25% discount on test charges for BIS
4.3.1(stitches/dm)	-	250	25% discount on test charges for BIS
4.3.2(Mouth)	-	250	25% discount on test charges for BIS
4.4(Mass of the loose liner )	-	250	25% discount on test charges for BIS
4.4(Width of the loose liner)	-	250	25% discount on test charges for BIS
4.4(Length of the line)	-	250	25% discount on test charges for BIS
4.4(Bottom seam of the loose liner)	-	250	25% discount on test charges for BIS
4.4.1(Liner)	-	250	25% discount on test charges for BIS
4.5 and Table 1 i(Capacity)	-	250	25% discount on test charges for BIS
5.2 and Table 1 ii a(Dimensions Inside Length)	-	250	25% discount on test charges for BIS
5.2 and Table 1 ii b(Dimensions Inside Width)	-	250	25% discount on test charges for BIS
5.2 and Table 1 iii(Ends per dm )	-	250	25% discount on test charges for BIS
5.2 and Table 1 iv(Picks per dm )	-	250	25% discount on test charges for BIS
5.1 and Table 1 v a(Mass of unlaminated sack IS 1964)	-	250	25% discount on test charges for BIS
5.1 and Table 1 v b(Mass of unlaminated sack with liner )	-	500	25% discount on test charges for BIS
5.2 and Table 1 vi a(Average breaking strength of fabric Lengthwise IS 1969 (Part 1))	-	1100	25% discount on test charges for BIS
5.2 and Table 1 vi b(Average breaking strength of fabric Widthwise IS 1969 (Part 1))	-	1100	25% discount on test charges for BIS
5.2 and Table 1 viii a(Elongation at break of fabric Lengthwise IS 1969 (Part 1))	-	1100	25% discount on test charges for BIS
5.2 and Table 1 viii b(Elongation at break of fabric Widthwise IS 1969 (Part 1))	-	1100	25% discount on test charges for BIS
5.2 and Table 1 ix(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	11280	25% discount on test charges for BIS
5.2 and Table 1 vi(Breaking strength of bottom seam IS 9030 )	-	1100	25% discount on test charges for BIS
5.2 and Table 1 ix(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	1100	25% discount on test charges for BIS
5.2 and Table 1 x(Ash content )	-	950	25% discount on test charges for BIS

23 Feb, 2027

-
-

14009

CIPET, Hyderabad

6111634

IS 14887 (2014)

Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sacks for packaging of 50 kg food grains – Specification (first revision)

21693 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.2(Tapes – Width and Thickness ( IS 6192/IS 11197))	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
3.2(Tapes – Linear Density (IS 6192/IS 11197))	-	500	25% DISCOUNT ON TEST CHARGES FOR BIS
3.2(Tapes – Tenacity (IS 6192/IS 11197))	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
3.2(Tapes – Elongation at point of rupture (IS 6192/IS 11197))	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
3.2(Tapes – Heat Shrinkage (HDPE) (Cl. 3.2 and IS 6192))	-	1700	25% DISCOUNT ON TEST CHARGES FOR BIS
3.2(Tapes – Colour Fastness for pigmented tapes (IS 6192/IS 11197))	-	850	25% DISCOUNT ON TEST CHARGES FOR BIS
3.2(Tapes – Dimensional stability (PP) (IS 11197))	-	1400	25% DISCOUNT ON TEST CHARGES FOR BIS
3.2(Unlaminated Fabric Mass )	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
3.3.1(Bottom seam (IS 10789))	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
4.1 and 3.4(Mass of bale (Cl. 4.1), Capacity (Cl 3.4))	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
4.2 and Table 1 ii(Dimensions )	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
5.2 and Table 1 iii(Ends per dm )	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
5.2 and Table 1 iv(Picks per dm )	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
4.2 and Table 1 v(Mass of sack )	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
4.2 and Table 1 vi(Average breaking strength of fabric )	-	2200	25% DISCOUNT ON TEST CHARGES FOR BIS
4.2 and Table 1 vi(Breaking strength of bottom seam )	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
4.2 and Table 1 viii(Elongation at break of fabric )	-	2200	25% DISCOUNT ON TEST CHARGES FOR BIS
4.2 and Table 1 ix(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	12380	25% DISCOUNT ON TEST CHARGES FOR BIS
4.2 and Table 1 x(Ash content )	-	950	25% DISCOUNT ON TEST CHARGES FOR BIS

23 Feb, 2027

-
-

14010

CIPET, Hyderabad

6111634

IS 14743 (1999)

Irrigation equipment - Hydrocyclone filters - Specification

7312.5 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1.1(TECHNICAL REQUIREMENTS - Material)	-	500	25 % DISCOUNT FOR BIS
4.2.1(Construction)	-	250	25 % DISCOUNT FOR BIS
4.2.2(Construction)	-	250	25 % DISCOUNT FOR BIS
4.3.1(Cyclonic Vessel)	-	500	25 % DISCOUNT FOR BIS
4.4.1(Connections IS 554.)	-	500	25 % DISCOUNT FOR BIS
5.1(Resistance to Internal Hydrostatk Pressure)	-	1500	25 % DISCOUNT FOR BIS
5.2(Resistance to Internal Hydrostatk Pressure at Elevated Temperatures)	-	3750	25 % DISCOUNT FOR BIS
5.3(Pressure Drop vs Flow)	-	2500	25 % DISCOUNT FOR BIS

23 Feb, 2027

-
-

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number