| 31 |
National Test House (NR) - NTH, Ghaziabad
| 8101304
| IS 13801 (2013) |
Chequered Cement Concrete Tiles - |
Class-Gen Pur /Heavy Duty/Type-Plain (cement/ colored) |
7000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| (Cl 7, 8 &9)(Length, Breadth, Thickness, Difference in length of side between the longest side and shorterst side in the sample shall not exceed 1 mm, Half tiles, Difference in Thickness between the thickest and thinnest tile in the sample shall not exceed 10 percent of minimum thickness, Depth of chequred groove, Thickness of wearing layer.) |
- |
500 |
|
- |
| (Cl 7, 8 &9)(Length, Breadth, Thickness, Difference in length of side between the longest side and shorterst side in the sample shall not exceed 1 mm, Half tiles, Difference in Thickness between the thickest and thinnest tile in the sample shall not exceed 10 percent of minimum thickness, Depth of chequred groove, Thickness of wearing layer.) |
- |
0 |
|
- |
| (Cl 7, 8 &9)(Length, Breadth, Thickness, Difference in length of side between the longest side and shorterst side in the sample shall not exceed 1 mm, Half tiles, Difference in Thickness between the thickest and thinnest tile in the sample shall not exceed 10 percent of minimum thickness, Depth of chequred groove, Thickness of wearing layer.) |
- |
0 |
|
- |
| Cl 11(Finish) |
- |
0 |
|
- |
| Cl 11(Finish) |
- |
0 |
|
- |
| Cl 11(Finish) |
- |
0 |
|
- |
| Cl 12.1(Concavity & Convexity ) |
- |
500 |
|
- |
| Cl 12.2(Longest gap between the arms of the square and the edge of the title shall not exceed 2 percent of the length.) |
- |
500 |
|
- |
| Cl 12.3(Shall not exceed 1 percent of the length of the edge.) |
- |
500 |
|
- |
| Cl 12.4(Water absorption) |
- |
1000 |
|
- |
| Cl 12.5(Wet transverse strength) |
- |
2000 |
|
- |
| Cl 12.6(Resistance to wear) |
- |
2500 |
|
- |
| Cl 12.6(Resistance to wear) |
- |
2500 |
|
- |
|
- |
-
- |
| 32 |
National Test House (NR) - NTH, Ghaziabad
| 8101304
| IS 1489 : Part 2 (2015) |
Portland - Pozzolana cement - Specification: Part 2 calcined clay based |
PPC (CCB) |
11000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 7 -Table 2- i(Fineness 4031 Part 2) |
- |
1000 |
|
- |
| 7 -Table 2- ii- a(Expansion by Le Chatelier- 4031 Part 3) |
- |
500 |
|
- |
| 7 -Table 2- ii- a(Expansion after aeration - 4031 Part 3) |
- |
0 |
|
- |
| 7 -Table 2- ii- b(Expansion by Autoclave- 4031 Part 3) |
- |
1000 |
|
- |
| 7 -Table 2- ii- b(Expansion after aeration- 4031 Part 3) |
- |
0 |
|
- |
| 7 -Table 2- iii- a(Setting Time Initial- 4031 Part 5) |
- |
500 |
|
- |
| 7 -Table 2-iii- b(Setting Time Final- 4031 Part 5) |
- |
500 |
|
- |
| 7 -Table 2- iv- a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6) |
- |
1000 |
|
- |
| 7 -Table 2- iv- b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6) |
- |
1000 |
|
- |
| 7 -Table 2- iv- c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6) |
- |
1000 |
|
- |
| 7 -Table 2- vi(Drying Shrinkage- IS 4031 Part 10) |
- |
1000 |
|
- |
| 6 - Table - 1 i(Insoluble residue - Cl 7.4 of IS 4032:1985) |
- |
1000 |
|
- |
| 6 - Table - 1 ii(Magnesia - Cl 7.2 of IS 4032:1985) |
- |
1000 |
|
- |
| 6 - Table - 1 iii(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 7.3 of IS 4032:1985) |
- |
1000 |
|
- |
| 6 - Table - 1 iv(Loss on ignition - Cl 7.1 of IS 4032:1985) |
- |
1000 |
|
- |
| 6 - Table - 1 v(Chloride content - Cl 4.13 of IS 4032:1985) |
- |
1000 |
|
- |
| 6 - Table - 1 vi( Alkali content as (Na2O + 0.658 K2O) - Cl 4.11 of IS 4032:1985) |
- |
1000 |
|
- |
| 6 - Table - 1 i(Insoluble residue - Cl 7.4 of IS 4032:1985) |
- |
1000 |
|
- |
| 6 - Table - 1 ii(Magnesia - Cl 7.2 of IS 4032:1985) |
- |
1000 |
|
- |
| 6 - Table - 1 iii(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 7.3 of IS 4032:1985) |
- |
1000 |
|
- |
| 6 - Table - 1 iv(Loss on ignition - Cl 7.1 of IS 4032:1985) |
- |
1000 |
|
- |
| 6 - Table - 1 v(Chloride content - Cl 4.13 of IS 4032:1985) |
- |
1000 |
|
- |
| 6 - Table - 1 vi( Alkali content as (Na2O + 0.658 K2O) - Cl 4.11 of IS 4032:1985) |
- |
1000 |
|
- |
|
- |
-
- |
| 33 |
National Test House (NR) - NTH, Ghaziabad
| 8101304
| IS 269 (2015) |
Ordinary portland cement - Specification (Sixth Revision) |
33,43,53,43S,53S |
10000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 7 Table-3 iv c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6) |
- |
1000 |
|
- |
| 7 Table-3 iv c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6) |
- |
0 |
|
- |
| 7 Table-3 iv c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6) |
- |
0 |
|
- |
| 7 Table-3 iv b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6) |
- |
1000 |
|
- |
| 7 Table-3 iv b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6) |
- |
0 |
|
- |
| 7 Table-3 iv b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6) |
- |
0 |
|
- |
| 7 Table-3 iv a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6) |
- |
1000 |
|
- |
| 7 Table-3 iv a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6) |
- |
0 |
|
- |
| 7 Table-3 iv a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6) |
- |
0 |
|
- |
| 7 Table-3 iii a(Setting Time Initial) |
- |
500 |
|
- |
| 7 Table-3 iii b(Setting Time Final) |
- |
500 |
|
- |
| 7 Table-3 i.(Fineness) |
- |
1000 |
|
- |
| 7 Table-3 ii a(Expansion by Le Chatelier) |
- |
500 |
|
- |
| 7 Table-3 ii a(Expansion after aeration) |
- |
0 |
|
- |
| 7 Table-3 ii b(Expansion by Autoclave) |
- |
1000 |
|
- |
| 7 Table-3 ii b(Expansion after aeration) |
- |
0 |
|
- |
| 6.1 Table-2 viii(Alkali content) |
- |
1000 |
|
- |
| 6.1 Table-2 vii(Chloride content) |
- |
1000 |
|
- |
| 6.1 Table-2 vi(Loss on ignition) |
- |
1000 |
|
- |
| 6.1 Table-2 v(Total Sulphur Content calculated as Sulphuric Anhydride) |
- |
1000 |
|
- |
| 6.1 Table-2 iv(Magnesia) |
- |
1000 |
|
- |
| 6.1 Table-2 iii.(Insoluble residue) |
- |
1000 |
|
- |
| 6.1 Table-2 ii.(Ratio of percentage of alumina to that of iron oxide) |
- |
2000 |
|
- |
| 6.1 Table-2 i.(Ratio of percentage of lime to percentage of silica, alumina and iron oxide) |
- |
3000 |
|
- |
| 6 - Table - 1 viii(Alkali content as (Na2O + 0.658 K2O) - Cl 4.11 of IS 4032:1985) |
- |
1000 |
|
- |
| 6 - Table - 1 vii(Chloride content - Cl 4.13 of IS 4032:1985) |
- |
1000 |
|
- |
| 6 - Table - 1 vi(Loss on ignition - Cl 4.2 of IS 4032:1985) |
- |
1000 |
|
- |
| 6 - Table - 1 v(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 4.9 of IS 4032:1985) |
- |
1000 |
|
- |
| 6 - Table - 1 iv(Magnesia - Cl 4.8 of IS 4032:1985) |
- |
1000 |
|
- |
| 6 - Table - 1 iii(Insoluble residue - Cl 4.10 of IS 4032:1985) |
- |
1000 |
|
- |
| 6 - Table - 1 ii(Ratio of percentage of alumina to that of iron oxide - Cl 4 of IS 4032:1985) |
- |
2000 |
|
- |
| 6 - Table - 1 i(Ratio of percentage of lime to percentages of silica, alumina and iron oxide - Cl 4 of IS 4032:1985) |
- |
3000 |
|
- |
| 6.1 Table-2 viii(Alkali content) |
- |
1000 |
|
- |
| 6.1 Table-2 vii(Chloride content) |
- |
1000 |
|
- |
| 6.1 Table-2 vi(Loss on ignition) |
- |
1000 |
|
- |
| 6.1 Table-2 v(Total Sulphur Content calculated as Sulphuric Anhydride) |
- |
1000 |
|
- |
| 6.1 Table-2 iv(Magnesia) |
- |
1000 |
|
- |
| 6.1 Table-2 iii.(Insoluble residue) |
- |
1000 |
|
- |
| 6.1 Table-2 ii.(Ratio of percentage of alumina to that of iron oxide) |
- |
2000 |
|
- |
| 6.1 Table-2 i.(Ratio of percentage of lime to percentage of silica, alumina and iron oxide) |
- |
3000 |
|
- |
| 6 - Table - 1 viii( Alkali content as (Na2O + 0.658 K2O) - Cl 4.11 of IS 4032:1985) |
- |
1000 |
|
- |
| 6 - Table - 1 vii(Chloride content - Cl 4.13 of IS 4032:1985) |
- |
1000 |
|
- |
| 6 - Table - 1 vi(Loss on ignition - Cl 4.2 of IS 4032:1985) |
- |
1000 |
|
- |
| 6 - Table - 1 v(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 4.9 of IS 4032:1985) |
- |
1000 |
|
- |
| 6 - Table - 1 iv(Magnesia - Cl 4.8 of IS 4032:1985) |
- |
1000 |
|
- |
| 6 - Table - 1 iii(Insoluble residue - Cl 4.10 of IS 4032:1985) |
- |
1000 |
|
- |
| 6 - Table - 1 ii(Ratio of percentage of alumina to that of iron oxide - Cl 4 of IS 4032:1985) |
- |
2000 |
|
- |
| 6 - Table - 1 i(Ratio of percentage of lime to percentages of silica, alumina and iron oxide - Cl 4 of IS 4032:1985) |
- |
3000 |
|
- |
|
- |
-
- |
| 34 |
National Test House (NR) - NTH, Ghaziabad
| 8101304
| IS 3812 : Part 2 (2013) |
Pulverized Fuel Ash - Part 2 : For Use as Admixture in Cement Mortar and Concrete |
- |
7000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 6.2(moisture content) |
- |
1000 |
|
- |
| 5.1, 6.1, Table 1(Silicon dioxide (SiO2 ) plus aluminium oxide (Al2O3 ) plus iron oxide (Fe2O3 )) |
- |
2000 |
|
- |
| 5.1, 6.1, Table 1(Silicon dioxide (SiO2 )) |
- |
1000 |
|
- |
| 5.1, 6.1, Table 1(Magnesium oxide (MgO) |
- |
1000 |
|
- |
| 5.1, 6.1, Table 1(Total sulphur as sulphur trioxide (SO3) |
- |
1000 |
|
- |
| 5.1, 6.1, Table 1(Available alkalies as equivalent sodium oxide (Na2O)) |
- |
1000 |
|
- |
| 5.1, 6.1, Table 1(Total chlorides) |
- |
1000 |
|
- |
| 5.1, 6.1, Table 1(Loss on ignition) |
- |
1000 |
|
- |
| 7.1, Table 1(Fineness — Specific surface in m2 /kg) |
- |
1000 |
|
- |
| 7.1, Table 1(Particles retained on 45 micron IS sieve (wet sieving)) |
- |
1000 |
|
- |
| 7.1, Table 1(Soundnes) |
- |
1500 |
|
- |
|
- |
-
- |
| 35 |
National Test House (NR) - NTH, Ghaziabad
| 8101304
| IS 737 (2024) |
WROUGHT ALUMINIUM AND ALUMINIUM ALLOY SHEET AND STRIP FOR GENERAL ENGINEERING PURPOSES SPECIFICATION (Fifth Revision) |
- |
12499.97 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl. 4(Ordering Information - IS 737) |
- |
0 |
|
- |
| Cl. 4 (a)(Grade/ Thickness - IS 737) |
- |
0 |
|
- |
| Cl. 4 (b)(Condition - IS 737) |
- |
0 |
|
- |
| Cl. 4 (c)(Quantity in Kg - IS 737) |
- |
0 |
|
- |
| Cl. 4 (d)(Size - Thickness X Width X Length (T X W X L) in mm for sheets and (T X W) in mm for Strips/ Coils - IS 737) |
- |
0 |
|
- |
| Cl. 4 (e)(Coil ID and Coil Weight for Strips/ Coils - IS 737) |
- |
0 |
|
- |
| Cl. 4 (f)(Core/ Spool Requirement for Coils - IS 737) |
- |
0 |
|
- |
| Cl. 4 (g)(Packing Mode - IS 737) |
- |
0 |
|
- |
| Cl. 5(Supply for Material - IS 737/ IS 10259) |
- |
0 |
|
- |
| Cl. 6(Freedom from Defects - IS 737) |
- |
999.99 |
|
- |
| Cl. 7(Chemical Composition - IS 504/ IS 504 (Part-1 to 12)/ IS 504 (Part-13 to 16)/ ASTM E 1251/ IS 11035) |
- |
0 |
|
- |
| Cl. 7(Si - IS 504 (Part-1)/ ASTM E 1251/ IS 11035) |
- |
499.98 |
|
- |
| Cl. 7(Fe - IS 504 (Part-2)/ ASTM E 1251/ IS 11035) |
- |
499.99 |
|
- |
| Cl. 7(Cu - IS 504 (Part-3)/ ASTM E 1251/ IS 11035) |
- |
499.98 |
|
- |
| Cl. 7(Mn - IS 504 (Part-5)/ ASTM E 1251/ IS 11035) |
- |
499.99 |
|
- |
| Cl. 7(Mg - IS 504 (Part-6)/ ASTM E 1251/ IS 11035) |
- |
499.99 |
|
- |
| Cl. 7(Cr - IS 504 (Part-8)/ ASTM E 1251/ IS 11035) |
- |
500 |
|
- |
| Cl. 7(Zn - IS 504 (Part-4)/ ASTM E 1251/ IS 11035) |
- |
499.99 |
|
- |
| Cl. 7(Ti - IS 504 (Part-11)/ ASTM E 1251/ IS 11035) |
- |
499.99 |
|
- |
| Cl. 7(Others (Each) - IS 504/ IS 504 (Part-1 to 12)/ IS 504 (Part-13 to 16)/ ASTM E 1251/ IS 11035) |
- |
499.98 |
|
- |
| Cl. 7(Others (Total) - IS 504/ IS 504 (Part-1 to 12)/ IS 504 (Part-13 to 16)/ ASTM E 1251/ IS 11035) |
- |
499.99 |
|
- |
| Cl. 7(Al - IS 504) |
- |
499.99 |
|
- |
| Cl. 8(Mechanical Properties - IS 1608 (Part-1)) |
- |
0 |
|
- |
| Cl. 8.1(0.2% Proof Stress - IS 1608 (Part-1)) |
- |
999.98 |
|
- |
| Cl. 8.1(Tensile Strength - IS 1608 (Part-1)) |
- |
999.98 |
|
- |
| Cl. 8.1(Elongation on 50mm Gauge Length - IS 1608 (Part-1)) |
- |
999.98 |
|
- |
| Cl. 8.2(Bend Test - IS 1599) |
- |
999.99 |
|
- |
| Cl. 9(Condition - IS 737/ IS 5052) |
- |
0 |
|
- |
| Cl. 10(Dimensions and Tolerances - IS 737/ IS 2676) |
- |
999.99 |
|
- |
| Cl. 11(Selection of Test Samples - IS 737) |
- |
0 |
|
- |
| Cl. 11.1(Sheet and Strip of Aluminium or Non - Heat Treatable Aluminium Alloy - IS 737) |
- |
0 |
|
- |
| Cl. 11.2(Sheet and Strip of Heat - Treatable Aluminium Alloys - IS 737) |
- |
0 |
|
- |
| Cl. 12(Retests - IS 737/ IS 10259) |
- |
0 |
|
- |
| Cl. 13(Packaging - IS 737/ IS 10259) |
- |
0 |
|
- |
| Cl. 13.1(Marking - IS 737) |
- |
0 |
|
- |
|
- |
-
- |
| 36 |
National Test House (NR) - NTH, Ghaziabad
| 8101304
| IS 736 (1986) |
Specification for wrought aluminium and aluminium alloy plate for general engineering purposes (Third Revision) |
- |
11000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4(Freedom from defect) |
- |
1000 |
|
- |
| 5(chemical composition) |
- |
0 |
|
- |
| 6.1 table 2(0.2% proof strength) |
- |
999.97 |
|
- |
| 6.1 table 2(tensile strength) |
- |
999.99 |
|
- |
| 6.1 table 2(Elongation) |
- |
999.98 |
|
- |
| 8(Dimensions & Tolerances) |
- |
999.97 |
|
- |
| 5.1, Table 1(Aluminium) |
- |
500 |
|
- |
| 5.1, Table 1(Copper) |
- |
499.98 |
|
- |
| 5.1, Table 1(Magnesium) |
- |
500 |
|
- |
| 5.1, Table 1(Silicon) |
- |
499.98 |
|
- |
| 5.1, Table 1(Iron) |
- |
499.98 |
|
- |
| 5.1, Table 1(Mangnese) |
- |
499.99 |
|
- |
| 5.1, Table 1(Zinc) |
- |
499.99 |
|
- |
| 5.1, Table 1(Titanium and /or other grain refining element) |
- |
500 |
|
- |
| 5.1, Table 1(Chromium) |
- |
499.98 |
|
- |
| 5.1, Table 1(Vanadium) |
- |
499.99 |
|
- |
| Cl. 5.1 Table 1,(Chromium + Manganese) |
- |
499.99 |
|
- |
| Cl. 5.1 Table 1,(Copper + Silicon + Iron + Manganese) |
- |
500.02 |
|
- |
|
- |
-
- |
| 37 |
National Test House (NR) - NTH, Ghaziabad
| 8101304
| IS 1285 (2023) |
WROUGHT ALUMINIUM AND ALUMINIUM ALLOYS EXTRUDED ROUND TUBE AND HOLLOW SECTIONS FOR GENERAL ENGINEERINGPURPOSES SPECIFICATION |
- |
10500 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 6(FREEDOM FROM DEFECTS) |
- |
1000 |
|
- |
| 8(DIMENSIONS AND TOLERANCES) |
- |
999.98 |
|
- |
| 10(MECHANICAL PROPERTIES) |
- |
3000 |
|
- |
| Cl.9.1(Aluminium- IS 504 and its parts or any other intrumental/chemical methods) |
- |
499.99 |
|
- |
| Cl.9.1(Copper- IS 504 and its parts or any other intrumental/chemical methods) |
- |
499.99 |
|
- |
| Cl.9.1(Magnesium- IS 504 and its parts or any other intrumental/chemical methods) |
- |
500 |
|
- |
| Cl.9.1(Silicon- IS 504 and its parts or any other intrumental/chemical methods) |
- |
500 |
|
- |
| Cl.9.1(Iron- IS 504 and its parts or any other intrumental/chemical methods) |
- |
500 |
|
- |
| Cl.9.1(Manganese- IS 504 and its parts or any other intrumental/chemical methods) |
- |
500 |
|
- |
| Cl.9.1(Zinc- IS 504 and its parts or any other intrumental/chemical methods) |
- |
500 |
|
- |
| Cl.9.1(Titanium and/ or other grain refining elements- IS 504 and its parts or any other intrumental/chemical methods) |
- |
500 |
|
- |
| Cl.9.1(Chromium- IS 504 and its parts or any other intrumental/chemical methods) |
- |
500 |
|
- |
| Cl.9.1(Remarks (Ti+V) - IS 504 and its parts or any other intrumental/chemical methods) |
- |
500 |
|
- |
| Cl.9.1(Remarks (Cr+Mn) - IS 504 and its parts or any other intrumental/chemical methods) |
- |
500 |
|
- |
| Cl.9.1(Remarks (Total Impurities)- IS 504 and its parts or any other intrumental/chemical methods) |
- |
500 |
|
- |
| Cl. 9(Aluminium) |
- |
0 |
|
- |
| Cl. 9(Copper) |
- |
0 |
|
- |
| Cl. 9(Magnesium) |
- |
0 |
|
- |
| Cl. 9(Silicon) |
- |
0 |
|
- |
| Cl. 9(Iron) |
- |
0 |
|
- |
| Cl. 9(Manganese) |
- |
0 |
|
- |
| Cl. 9(Zinc) |
- |
0 |
|
- |
| Cl. 9(Titanium and/or other grain refining elements) |
- |
0 |
|
- |
| Cl. 9(Chromium) |
- |
0 |
|
- |
| Cl. 9(Ti+V) |
- |
0 |
|
- |
| Cl. 9(Cr+Mn) |
- |
0 |
|
- |
| Clause-10(Tensile strength) |
- |
0 |
|
- |
| Clauses 9.2(Ni) |
- |
0 |
|
- |
| Clauses 9.2(Pb) |
- |
0 |
|
- |
| Clauses 9.2(Sn) |
- |
0 |
|
- |
| Clauses 9.2(Ag) |
- |
0 |
|
- |
| Clauses 9.2(Be) |
- |
0 |
|
- |
| Clauses 9.2(Zr) |
- |
0 |
|
- |
| Clauses 9.2(Co) |
- |
0 |
|
- |
|
- |
-
- |
| 38 |
INDIAN RUBBER MATERIALS RESEARCH INSTITUTE (IRMRI)
| 7119305
| IS 5382 (2025) |
RUBBER SEALS JOINT RINGS FOR WATER SUPPLY DRAINAGE AND SEWERAGE PIPELINES SPECIFICATION FOR MATERIALS ( Third Revision ) |
- |
330520 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl-5.1(General requirement) |
- |
300 |
|
- |
| Cl-5.4(Dimensional tolerances) |
- |
600 |
|
- |
| Cl-5.5(Imperfections and defects) |
- |
300 |
|
- |
| Cl-5.6(Hardness) |
- |
1200 |
|
- |
| Cl-5.7(Tensile strength and elongation at break) |
- |
2000 |
|
- |
| Cl-5.8.1(Compression set in air-General) |
- |
3400 |
|
- |
| Cl-5.8.2(Compression set in air-Compression set at 23 °C and 70 °C.) |
- |
5600 |
|
- |
| Cl-5.8.3(Compression set in air-Low-temperature compression set at 72–10 °C) |
- |
14840 |
|
- |
| Cl-5.9(Accelerated ageing in air-7 days at 70 °C.) |
- |
5600 |
|
- |
| Cl-5.9(Hardness change, max./min.) |
- |
1200 |
|
- |
| Cl-5.9(Tensile-strength change, max) |
- |
1200 |
|
- |
| Cl-5.9(Elongation change, max./min) |
- |
800 |
|
- |
| Cl-5.10(Stress relaxation in compression-7 days at 23 °C) |
- |
14700 |
|
- |
| Cl-5.10(Stress relaxation in compression-100 days at 23 °C) |
- |
210000 |
|
- |
| Cl-5.11(Volume change in water max./ min.
7 days at 70 °C) |
- |
1700 |
|
- |
| Cl-5.12(Ozone resistance) |
- |
10080 |
|
- |
| Cl-5.13.1(Spliced joints) |
- |
1800 |
|
- |
| Cl-5.13.2(Strength of spliced joints) |
- |
0 |
|
- |
| Cl-6.1(Low temperature performance at –25 °C, (type L)) |
- |
3900 |
|
- |
| Cl-6.1(Compression set, max.
72 h at −25 °C) |
- |
14840 |
|
- |
| Cl-6.1(Hardness change, max
168 h at −25 °C) |
- |
29760 |
|
- |
| Cl-6.2(Volume change in oil, max./min.
72 h at 70 °C (type O)) |
- |
6100 |
|
- |
| Cl-11(Marking and labelling) |
- |
600 |
|
- |
|
30 Jun, 2029 |
-
- |
| 39 |
INDIAN RUBBER MATERIALS RESEARCH INSTITUTE (IRMRI)
| 7119305
| IS 446 (2025) |
RUBBER HOSES TEXTILE-REINFORCED FOR COMPRESSED AIR SPECIFICATION ( Sixth Revision ) |
Type 1, Type 2 and Type 3 |
44700 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl-5(Materials and construction) |
- |
900 |
|
- |
| Cl-6.1(Inside diameters and tolerances) |
- |
300 |
|
- |
| Cl-6.2(Concentricity) |
- |
300 |
|
- |
| Cl-6.3(Tolerance on length) |
- |
300 |
|
- |
| Cl-6.4(Type 1: lining) |
- |
300 |
|
- |
| Cl-6.4(Type 1: cover) |
- |
300 |
|
- |
| Cl-6.4(Type 2: lining) |
- |
300 |
|
- |
| Cl-6.4(Type 2: cover) |
- |
300 |
|
- |
| Cl-6.4(Type 3: lining) |
- |
300 |
|
- |
| Cl-6.4(Type 3: cover) |
- |
300 |
|
- |
| Cl-7.1, Table-2(Minimum tensile strength- Lining) |
- |
1000 |
|
- |
| Cl-7.1, Table-2(Minimum tensile strength- Cover) |
- |
1000 |
|
- |
| Cl-7.1, Table-2(Minimum elongation at break- Lining) |
- |
900 |
|
- |
| Cl-7.1, Table-2(Minimum elongation at break- Cover) |
- |
900 |
|
- |
| Cl-7.1, Table-2(Change in tensile strength from original value (max.)- Lining) |
- |
3400 |
|
- |
| Cl-7.1, Table-2(Change in tensile strength from original value (max.)- Cover) |
- |
3400 |
|
- |
| Cl-7.1, Table-2("Change in elongation at break 37 (dumb-bell test piece)
from original value (max.)- Lining") |
- |
900 |
|
- |
| Cl-7.1, Table-2("Change in elongation at break 37 (dumb-bell test piece)
from original value (max.)-Cover") |
- |
900 |
|
- |
| Cl-7.1, Table-2(Increase in volume (class A)) |
- |
900 |
|
- |
| Cl-7.1, Table-2(Increase in volume (max.) (class B only)-Lining) |
- |
900 |
|
- |
| Cl-7.1, Table-2(Increase in volume (max.) (class B only)-Cover) |
- |
900 |
|
- |
| Cl-7.1, Table-2(Increase in volume (max.) (class C only)- Lining) |
- |
900 |
|
- |
| Cl-7.1, Table-2(Increase in volume (max.) (class C only)- Cover) |
- |
900 |
|
- |
| Cl-7.2, Table- 3(Proof pressure- type 1) |
- |
2000 |
|
- |
| Cl-7.2, Table- 3(Proof pressure- type 2) |
- |
2000 |
|
- |
| Cl-7.2, Table- 3(Proof pressure- type 3) |
- |
2000 |
|
- |
| Cl-7.2, Table- 3(Change in length at maximum working pressure) |
- |
2000 |
|
- |
| Cl-7.2, Table- 3(Change in diameter at maximum working pressure) |
- |
2000 |
|
- |
| Cl-7.2, Table- 3(Minimum burst pressure-type 1) |
- |
2000 |
|
- |
| Cl-7.2, Table- 3(Minimum burst pressure- type 2) |
- |
2000 |
|
- |
| Cl-7.2, Table- 3(Minimum burst pressure- type 3) |
- |
2000 |
|
- |
| Cl-7.2, Table- 3(Adhesion between components) |
- |
1000 |
|
- |
| Cl-7.2, Table- 3(Ozone resistance) |
- |
3900 |
|
- |
| Cl-7.2, Table- 3(Flexibility at 23 °C) |
- |
1000 |
|
- |
| Cl-7.2, Table- 3(Low-temperature flexibility) |
- |
2000 |
|
- |
| Cl-11(Marking) |
- |
300 |
|
- |
|
30 Jun, 2029 |
-
- |
| 40 |
INDIAN RUBBER MATERIALS RESEARCH INSTITUTE (IRMRI)
| 7119305
| IS 12585 (2023) |
SPECIFICATION FOR THERMOPLASTIC HOSES (TEXTILE REINFORCED) FOR WATER - GENERAL PURPOSE ( First Revision of IS 12585 ) |
Type1 (Low pressure)/ Type 2 (Medium)/ Type 3 (High Pressure) |
50800 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 5(Materials and Construction) |
- |
300 |
|
- |
| 5(Materials and Construction) |
- |
300 |
|
- |
| 6.1(Dimensions (Inside diameters and tolerances on inside diameter)) |
- |
300 |
|
- |
| 6.2(Concentricity) |
- |
300 |
|
- |
| 6.3(Tolerance on Length) |
- |
300 |
|
- |
| 6.4(Minimum Wall Thickness) |
- |
300 |
|
- |
| 7, 7.1 -Table 2(Physical Properties-Thermoplastic materials (Minimum Tensile Strength) - Lining) |
- |
1000 |
|
- |
| 7, 7.1 -Table 2(Physical Properties-Thermoplastic materials (Minimum Tensile Strength) - Cover) |
- |
1000 |
|
- |
| 7, 7.1 -Table 2(Physical Properties-Thermoplastic materials (Minimum Elongation at break) - Lining) |
- |
1000 |
|
- |
| 7, 7.1 -Table 2(Physical Properties-Thermoplastic materials (Minimum Elongation at break) - Cover) |
- |
900 |
|
- |
| 7, 7.1 -Table 2(Physical Properties-Thermoplastic materials-Resistance to ageing (Change in Tensile Strength from original value, max) -Lining) |
- |
900 |
|
- |
| 7, 7.1 -Table 2(Physical Properties-Thermoplastic materials - Resistance to ageing(Change in Tensile Strength from original value, max) -Cover) |
- |
900 |
|
- |
| 7, 7.1 -Table 2(Physical Properties-Thermoplastic materials - Resistance to ageing(Change in Elongation at break from original value, max) - Lining) |
- |
2400 |
|
- |
| 7, 7.1 -Table 2(Physical Properties-Thermoplastic materials - Resistance to ageing(Change in Elongation at break from original value, max) - Cover) |
- |
2400 |
|
- |
| 7, 7.1 -Table 2(Physical Properties-Thermoplastic materials - Loss in mass on heating- Lining) |
- |
2400 |
|
- |
| 7, 7.1 -Table 2(Physical Properties-Thermoplastic materials - Loss in mass on heating- Cover) |
- |
1000 |
|
- |
| 7, 7.2 -Table 3(Physical Properties-Finished Hoses - Proof Pressure at 23°C - Type 1) |
- |
2000 |
|
- |
| 7, 7.2 -Table 3(Physical Properties-Finished Hoses - Proof Pressure at 23°C - Type 2) |
- |
2000 |
|
- |
| 7, 7.2 -Table 3(Physical Properties-Finished Hoses - Proof Pressure at 23°C - Type 3) |
- |
2000 |
|
- |
| 7, 7.2 -Table 3(Physical Properties-Finished Hoses - Minimum Burst Pressure at 23°C - Type 1) |
- |
2000 |
|
- |
| 7, 7.2 -Table 3(Physical Properties-Finished Hoses - Minimum Burst Pressure at 23°C - Type 2) |
- |
2000 |
|
- |
| 7, 7.2 -Table 3(Physical Properties-Finished Hoses - Minimum Burst Pressure at 23°C - Type 3) |
- |
2000 |
|
- |
| 7, 7.2 -Table 3(Physical Properties-Finished Hoses - Proof Pressure at 60°C - Type 1) |
- |
2000 |
|
- |
| 7, 7.2 -Table 3(Physical Properties-Finished Hoses - Proof Pressure at 60°C - Type 2) |
- |
2000 |
|
- |
| 7, 7.2 -Table 3(Physical Properties-Finished Hoses - Proof Pressure at 60°C - Type 3) |
- |
2000 |
|
- |
| 7, 7.2 -Table 3(Physical Properties-Finished Hoses - Minimum Burst Pressure at 60°C - Type 1) |
- |
2000 |
|
- |
| 7, 7.2 -Table 3(Physical Properties-Finished Hoses - Minimum Burst Pressure at 60°C - Type 2) |
- |
2000 |
|
- |
| 7, 7.2 -Table 3(Physical Properties-Finished Hoses - Minimum Burst Pressure at 60°C - Type 3) |
- |
2000 |
|
- |
| 7, 7.2 -Table 3(Physical Properties-Finished Hoses - Change in Length at maximum working pressure at 23°C (±8%)) |
- |
2000 |
|
- |
| 7, 7.2 -Table 3(Physical Properties-Finished Hoses - Adhesion between components) |
- |
2100 |
|
- |
| 7, 7.2 -Table 3(Flexibility at 23°C) |
- |
1000 |
|
- |
| 7, 7.2 -Table 3(Low Temperature flexibility) |
- |
2000 |
|
- |
| 7, 7.2 -Table 3(Physical Properties-Finished Hoses - UV resistance (Xenon-arc lamp)) |
- |
4400 |
|
- |
| 5(Materials and Construction) |
- |
300 |
|
- |
| 5(Materials and Construction) |
- |
300 |
|
- |
| 6.1(Dimensions (Inside diameters and tolerances on inside diameter)) |
- |
300 |
|
- |
| 6.2(Concentricity) |
- |
300 |
|
- |
| 6.3(Tolerance on Length) |
- |
300 |
|
- |
| 6.4(Minimum Wall Thickness) |
- |
200 |
|
- |
| 7, 7.1 -Table 2(Physical Properties-Thermoplastic materials (Minimum Tensile Strength) - Lining) |
- |
1000 |
|
- |
| 7, 7.1 -Table 2(Physical Properties-Thermoplastic materials (Minimum Tensile Strength) - Cover) |
- |
1000 |
|
- |
| 7, 7.1 -Table 2(Physical Properties-Thermoplastic materials (Minimum Elongation at break) - Lining) |
- |
1000 |
|
- |
| 7, 7.1 -Table 2(Physical Properties-Thermoplastic materials (Minimum Elongation at break) - Cover) |
- |
900 |
|
- |
| 7, 7.1 -Table 2(Physical Properties-Thermoplastic materials-Resistance to ageing (Change in Tensile Strength from original value, max) -Lining) |
- |
900 |
|
- |
| 7, 7.1 -Table 2(Physical Properties-Thermoplastic materials - Resistance to ageing(Change in Tensile Strength from original value, max) -Cover) |
- |
900 |
|
- |
| 7, 7.1 -Table 2(Physical Properties-Thermoplastic materials - Resistance to ageing(Change in Elongation at break from original value, max) - Lining) |
- |
2400 |
|
- |
| 7, 7.1 -Table 2(Physical Properties-Thermoplastic materials - Resistance to ageing(Change in Elongation at break from original value, max) - Cover) |
- |
2400 |
|
- |
| 7, 7.1 -Table 2(Physical Properties-Thermoplastic materials - Loss in mass on heating- Lining) |
- |
2400 |
|
- |
| 7, 7.1 -Table 2(Physical Properties-Thermoplastic materials - Loss in mass on heating- Cover) |
- |
1000 |
|
- |
| 7, 7.2 -Table 3(Physical Properties-Finished Hoses - Proof Pressure at 23°C - Type 1) |
- |
2000 |
|
- |
| 7, 7.2 -Table 3(Physical Properties-Finished Hoses - Proof Pressure at 23°C - Type 2) |
- |
2000 |
|
- |
| 7, 7.2 -Table 3(Physical Properties-Finished Hoses - Proof Pressure at 23°C - Type 3) |
- |
2000 |
|
- |
| 7, 7.2 -Table 3(Physical Properties-Finished Hoses - Minimum Burst Pressure at 23°C - Type 1) |
- |
2000 |
|
- |
| 7, 7.2 -Table 3(Physical Properties-Finished Hoses - Minimum Burst Pressure at 23°C - Type 2) |
- |
2000 |
|
- |
| 7, 7.2 -Table 3(Physical Properties-Finished Hoses - Minimum Burst Pressure at 23°C - Type 3) |
- |
2000 |
|
- |
| 7, 7.2 -Table 3(Physical Properties-Finished Hoses - Proof Pressure at 60°C - Type 1) |
- |
2000 |
|
- |
| 7, 7.2 -Table 3(Physical Properties-Finished Hoses - Proof Pressure at 60°C - Type 2) |
- |
2000 |
|
- |
| 7, 7.2 -Table 3(Physical Properties-Finished Hoses - Proof Pressure at 60°C - Type 3) |
- |
2000 |
|
- |
| 7, 7.2 -Table 3(Physical Properties-Finished Hoses - Minimum Burst Pressure at 60°C - Type 1) |
- |
2000 |
|
- |
| 7, 7.2 -Table 3(Physical Properties-Finished Hoses - Minimum Burst Pressure at 60°C - Type 2) |
- |
2000 |
|
- |
| 7, 7.2 -Table 3(Physical Properties-Finished Hoses - Minimum Burst Pressure at 60°C - Type 3) |
- |
2000 |
|
- |
| 7, 7.2 -Table 3(Physical Properties-Finished Hoses - Change in Length at maximum working pressure at 23°C (±8%)) |
- |
2000 |
|
- |
| 7, 7.2 -Table 3(Physical Properties-Finished Hoses - Adhesion between components) |
- |
2100 |
|
- |
| 7, 7.2 -Table 3(Flexibility at 23°C) |
- |
1000 |
|
- |
| 7, 7.2 -Table 3(Low Temperature flexibility) |
- |
2000 |
|
- |
| 7, 7.2 -Table 3(Physical Properties-Finished Hoses - UV resistance (Xenon-arc lamp)) |
- |
4400 |
|
- |
|
30 Jun, 2029 |
-
- |
| 41 |
INDIAN RUBBER MATERIALS RESEARCH INSTITUTE (IRMRI)
| 7119305
| IS 10908 (2023) |
FLEXIBLE RUBBER TUBING FOR LIQUEFIED PETROLEUM GAS SPECIFICATION Second Revision |
- |
16300 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4.1(The materials used in the manufacture of tubing shall be homogeneous and shall be resistant to outdoor exposure.) |
- |
100 |
|
- |
| 4.1(The tubing made out of this material shall be green in colour and shall be supplied normally in cut lengths or in rolls of running length) |
- |
100 |
|
- |
| 4.1("when supplied in cut lengths, the pieces
shall be of minimum 1.0 m to maximum of 1.5 m in length.
") |
- |
100 |
|
- |
| 4.2(The walls shall be seamless and free from all visible defects, such as lumps, blow-holes, cracks etc and the bore shall be clean and free from loose particles which might be carried forward by the gas.) |
- |
100 |
|
- |
| 4.3.1(The tubing when supplied in 6.4 mm inside diameter; the tolerance as per table-1) |
- |
200 |
|
- |
| 4.3.1(The tubing when supplied in 7.00 mm inside diameter; the tolerance as per table-1) |
- |
200 |
|
- |
| 4.3.2(It shall comply with thickness as given in Table 1, when measured according to IS 443 (Part 8). The readings shall be taken on a set of six test pieces cut from different sample sections.(For Wall thickness 3.20 mm)) |
- |
200 |
|
- |
| 4.3.2(It shall comply with thickness as given in Table 1, when measured according to IS 443 (Part 8). The readings shall be taken on a set of six test pieces cut from different sample sections.(For Wall thickness 3.50 mm)) |
- |
200 |
|
- |
| 4.4.1(When tested in accordance with the method given in Annex B, the tubing shall fit over the standard and oversize metal nozzle shown in Fig. 1, 2 and 3.) |
- |
1300 |
|
- |
| 4.4.2("When tested in accordance with the method given in Annex B, the tubing shall remain attached to both nozzles throughout the test period.
") |
- |
1300 |
|
- |
| 4.5(When immersed in water for 5 min under an internal air pressure of 0.25 MPa or 250 kPa (2.5 bar), the increase in the outside diameter or the tubing shall not be more than 15 percent.) |
- |
1000 |
|
- |
| 4.12("When tested in accordance with the method
described in Annex F, the tubing shall not burn to either of the outer marks within the test period of 45 s") |
- |
1000 |
|
- |
| 4.11("When tested in accordance with the method
described in Annex E, the slit tube shall not show any breakage on surface or cracks or defects.") |
- |
3000 |
|
- |
| 4.10(When tested in accordance with Annex D, the npentane absorbed shall not exceed 15 percent of the initial mass of the tubing and the amount of npentane extractable matter shall not exceed 10 percent of the initial mass of tubing.) |
- |
2000 |
|
- |
| 4.9(60 cm long tubing shall be subjected to a crushing force of 350 N applied on the middle of the tubing evenly over a length of 25 mm for 5 minutes, and 30 min after removal of the force it shall not show any deformation or collapse, nor shall it leak when subjected to an internal air pressure of 250 kPa) |
- |
1000 |
|
- |
| 4.8.2(The tubing shall be so flexible that it will make contact with a cylindrical former of radius 68 mm for at least 110° of its circumference when the immersed tubing is placed over the former and a mass of 1.6 kg is attached to each end.) |
- |
1000 |
|
- |
| 4.8.1("The tubing shall be immersed for 72 h in liquid pentane and then conditioned at room temperature for 24 h, after which it shall be tested in accordance with the method prescribed in Annex C, the gas pressure shown on the manometer shall not drop by
more than 1 kPa") |
- |
1000 |
|
- |
| 4.7("The flexible tubing or suitable portion of the tubing shall be subjected to accelerated ageing at a temperature of 100 °C for 72 h in accordance with the normal method prescribed in IS 3400 (Part 4). It shall not show a change of + 10° A of its original
shore hardness value (see 4.6) after accelerated ageing") |
- |
1000 |
|
- |
| 4.6(The hardness on the flat surface of the cut/slit tubing shall be measured as prescribed in IS 3400 (Part 2/Sec 4), the shore hardness shall be 60 ± 5°A.) |
- |
500 |
|
- |
| 4.5(When immersed in water for 5 min under an internal air pressure of 0.25 MPa or 250 kPa (2.5 bar), there shall be no sign of leakage in the tubing. Also the same shall not burst when the pressure is increased to 0.5 MPa or 500 kPa (5 bar), The test shall be carried out on a length of 60 cm.) |
- |
1000 |
|
- |
|
30 Jun, 2029 |
-
- |
| 42 |
INDIAN RUBBER MATERIALS RESEARCH INSTITUTE (IRMRI)
| 7119305
| IS 13098 (2024) |
AUTOMOTIVE VEHICLES TUBES FOR PNEUMATIC TYRES â SPECIFICATION (second revision) |
- |
21500 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl 3.1(Materials) |
- |
600 |
|
- |
| Cl 3.2(Classification) |
- |
3800 |
|
- |
| Cl 3.2.1(Blend Name) |
- |
3800 |
|
- |
| Cl 3.3(Fit) |
- |
600 |
|
- |
| Cl 3.3.1(Thickness Uniformity) |
- |
600 |
|
- |
| Cl 4.1.1(Elongation) |
- |
1900 |
|
- |
| Cl 4.1.2(Strength of Splice) |
- |
1900 |
|
- |
| Cl 4.1.3(Set After Ageing) |
- |
3600 |
|
- |
| Cl 4.1.4(Accelerated Ageing) |
- |
3500 |
|
- |
| Cl 5(AIR TIGHTNESS) |
- |
600 |
|
- |
| Cl 6(MARKING) |
- |
600 |
|
- |
|
30 Jun, 2029 |
-
- |
| 43 |
INDIAN RUBBER MATERIALS RESEARCH INSTITUTE (IRMRI)
| 7119305
| IS 14261 (1995) |
Transmission devices - V - Belts endless narrowv - Belts for industrial use - Specification |
SPZ, SPA, SPB, SPC |
8700 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl 4(Material And Workmanship) |
- |
600 |
|
- |
| Cl 5.1(Cross-Section Dimensions) |
- |
1500 |
|
- |
| Cl 5.2(Cross-Section Dimensions) |
- |
1500 |
|
- |
| Cl 6(DESIGNATION) |
- |
600 |
|
- |
| Cl 7(Length Measurement And Tolerances) |
- |
0 |
|
Included in Determination of Pitch Length |
| Cl 7.2.1(Determination of Pitch Length) |
- |
3000 |
|
- |
| Cl 7.3(Matched Belts) |
- |
1500 |
|
- |
|
30 Jun, 2029 |
-
- |
| 44 |
INDIAN RUBBER MATERIALS RESEARCH INSTITUTE (IRMRI)
| 7119305
| IS 2494 : Part 1 (1994) |
V - Belts - Endless V - Belts for industrial purposes: Part 1 general purpose - Specification (Second Revision) |
Z, A, B, C, D, E, SPZ. SPA. SPB, SPC |
26000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 11.0(Marking) |
- |
600 |
|
- |
| 10.1(Elongation) |
- |
2500 |
|
- |
| 10.1(Tensile Strength) |
- |
0 |
|
Included in the Elongation Charges |
| 7.2.2(Matched Belts - Code) |
- |
2000 |
|
- |
| 7.2.1(Matched Belts - Difference) |
- |
1500 |
|
- |
| 7.1(Belt Pitch Length) |
- |
3000 |
|
- |
| 6.0(Designation) |
- |
600 |
|
- |
| 4.1(Material and Workmanship) |
- |
600 |
|
- |
| 4.1(Material -Reinforcing polyester cord/fabric of the V-belts) |
- |
0 |
|
Included in the 4.1 |
| 4.1(Material and Workmanship) |
- |
0 |
|
Included in the 4.1 |
| 7.2(Test Matched Belts) |
- |
0 |
|
Included in the Matched belt difference. |
| 5 & 11(Test Belt ride position of top surface of belt with respect to top of pully groove.) |
- |
1500 |
|
- |
| Clause 5 Table 1(Nominal Pitch Width (Wp)) |
- |
1500 |
|
- |
| Clause 5 Table 1(Nominal Height (T)) |
- |
1500 |
|
- |
| Clause 5 Table 1(Nominal Included Angle (A)) |
- |
2500 |
|
- |
| Clause 5 Table 1(Nominal Pitch Width (W)) |
- |
1500 |
|
- |
| Cl-4.3(Presence of polychloroprene rubber on outside jacket of V-belt) |
- |
3800 |
|
- |
| 4.1(Material -Reinforcing polyester cord/fabric of the V-belts) |
- |
0 |
|
duplicate |
| 7.2(Test Matched Belts) |
- |
0 |
|
duplicate |
| 5 & 11(Test Belt ride position of top surface of belt with respect to top of pully groove.) |
- |
0 |
|
duplicate |
| Clause 5 Table 1(Nominal Pitch Width (Wp)) |
- |
0 |
|
duplicate |
| Clause 5 Table 1(Nominal Height (T)) |
- |
0 |
|
duplicate |
| Clause 5 Table 1(Nominal Included Angle (A)) |
- |
0 |
|
duplicate |
| Clause 5 Table 1(Nominal Pitch Width (W)) |
- |
0 |
|
duplicate |
| Cl-4.3(Presence of polychloroprene rubber on outside jacket of V-belt) |
- |
0 |
|
duplicate |
|
30 Jun, 2029 |
-
- |
| 45 |
INDIAN RUBBER MATERIALS RESEARCH INSTITUTE (IRMRI)
| 7119305
| IS 7466 (2023) |
Rubber Gasket for Pressure Cooker � Specification ( Second Revision ) |
- |
78500 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl. No. 4.2(Workmanship and Finish) |
- |
600 |
|
- |
| Cl. No. 4.4, table no. 1(i)(Hardness) |
- |
1200 |
|
- |
| Cl. No. 4.4, table no. 1(ii)(Tensile strength) |
- |
1000 |
|
- |
| Cl. No. 4.4, table no. 1(iii)(Elongation at break) |
- |
900 |
|
- |
| Cl. No. 4.4, table no. 1(iv)("Hardness, Tensile strength, Elongation at break) |
- |
5500 |
|
- |
| Cl. No. 4.4, table no. 1(v)("Hardness, Tensile strength, Elongation at break
percent") |
- |
6700 |
|
- |
| Cl. No. 4.4, table no. 1(vi)(Change in volume) |
- |
1700 |
|
- |
| Cl. No. 4.4, table no. 1(vii)(Compression set) |
- |
3600 |
|
- |
| Cl. No. 4.4, table no. 1(viii)(Discolouration) |
- |
1500 |
|
- |
| Cl. No. 4.4, table no. 1(ix)(Odour and taste) |
- |
1000 |
|
- |
| Cl. No. 4.4, table no. 1(x)(Volatile matter) |
- |
800 |
|
- |
| Cl. No. 4.4, table no. 1(xi)("Total zinc oxide, percent
by mass, ") |
- |
4700 |
|
- |
| Cl. No. 4.4, table no. 1(xv)("Polycyclic aromatic
hydrocarbons (PAH) Benzo(a)pyrene (BaP)"
Extractables) |
- |
12400 |
|
- |
| Cl. No. 4.4, table no. 1(xv)("Polycyclic aromatic
hydrocarbons (PAH) Benzo(a)pyrene (BaP)") |
- |
15000 |
|
- |
| Cl. No. 4.5, Table no. 2(i)(Antimony) |
- |
1900 |
|
- |
| Cl. No. 4.5, Table no. 2(ii)(Arsenic) |
- |
1900 |
|
- |
| Cl. No. 4.5, Table no. 2(iii)(Chromium) |
- |
1900 |
|
- |
| Cl. No. 4.5, Table no. 2(iv)(Mercury) |
- |
1900 |
|
- |
| Cl. No. 4.5, Table no. 2(v)(Cadmium) |
- |
1900 |
|
- |
| Cl. No. 4.5, Table no. 2(vi)(Lead) |
- |
1900 |
|
- |
| Cl. No. 4.5, Table no. 2(vii)(Barium) |
- |
1900 |
|
- |
| Cl. No. 4.5, Table no. 2(viii)(Selenium) |
- |
1900 |
|
- |
| Cl. No. 5(Packing and Marking) |
- |
0 |
|
- |
| Cl. No.4.6(Performance test) |
- |
4800 |
|
- |
| Cl. No. 3(Types) |
- |
3800 |
|
- |
| Cl. No. 4.3(Dimensions) |
- |
1500 |
|
- |
| Cl. No. 4.2(Workmanship and Finish) |
- |
600 |
|
- |
| Cl. No. 4.4, table no. 1(i)(Hardness) |
- |
1200 |
|
- |
| Cl. No. 4.4, table no. 1(ii)(Tensile strength) |
- |
1000 |
|
- |
| Cl. No. 4.4, table no. 1(iii)(Elongation at break) |
- |
900 |
|
- |
| Cl. No. 4.4, table no. 1(iv)("Hardness, Tensile strength, Elongation at break) |
- |
5500 |
|
- |
| Cl. No. 4.4, table no. 1(v)("Hardness, Tensile strength, Elongation at break
percent") |
- |
6700 |
|
- |
| Cl. No. 4.4, table no. 1(vi)(Change in volume) |
- |
1700 |
|
- |
| Cl. No. 4.4, table no. 1(vii)(Compression set) |
- |
3600 |
|
- |
| Cl. No. 4.4, table no. 1(viii)(Discolouration) |
- |
1500 |
|
- |
| Cl. No. 4.4, table no. 1(ix)(Odour and taste) |
- |
1000 |
|
- |
| Cl. No. 4.4, table no. 1(x)(Volatile matter) |
- |
800 |
|
- |
| Cl. No. 4.4, table no. 1(xi)("Total zinc oxide, percent
by mass, ") |
- |
4700 |
|
- |
| Cl. No. 4.4, table no. 1(xv)("Polycyclic aromatic
hydrocarbons (PAH) Benzo(a)pyrene (BaP)"
Extractables) |
- |
12400 |
|
- |
| Cl. No. 4.5, Table no. 2(i)(Antimony) |
- |
1900 |
|
- |
| Cl. No. 4.5, Table no. 2(ii)(Arsenic) |
- |
1900 |
|
- |
| Cl. No. 4.5, Table no. 2(iii)(Chromium) |
- |
1900 |
|
- |
| Cl. No. 4.5, Table no. 2(iv)(Mercury) |
- |
1900 |
|
- |
| Cl. No. 4.5, Table no. 2(v)(Cadmium) |
- |
1900 |
|
- |
| Cl. No. 4.5, Table no. 2(vi)(Lead) |
- |
1900 |
|
- |
| Cl. No. 4.5, Table no. 2(vii)(Barium) |
- |
1900 |
|
- |
| Cl. No.4.6(Performance test) |
- |
4800 |
|
- |
| Cl. No. 3(Types) |
- |
3800 |
|
- |
| Cl. No. 4.4, table no. 1(xv)("Polycyclic aromatic
hydrocarbons (PAH) Benzo(a)pyrene (BaP)") |
- |
15000 |
|
The charge for this test is already included. It's repeated |
| Cl. No. 4.2(Workmanship and Finish) |
- |
600 |
|
The charge for this test is already included. It's repeated |
| Cl. No. 4.4, table no. 1(i)(Hardness) |
- |
1200 |
|
The charge for this test is already included. It's repeated |
| Cl. No. 4.4, table no. 1(ii)(Tensile strength) |
- |
1000 |
|
The charge for this test is already included. It's repeated |
| Cl. No. 4.4, table no. 1(iii)(Elongation at break) |
- |
900 |
|
The charge for this test is already included. It's repeated |
| Cl. No. 4.4, table no. 1(iv)("Hardness, Tensile strength, Elongation at break) |
- |
5500 |
|
The charge for this test is already included. It's repeated |
| Cl. No. 4.4, table no. 1(v)("Hardness, Tensile strength, Elongation at break
percent") |
- |
6700 |
|
The charge for this test is already included. It's repeated |
| Cl. No. 4.4, table no. 1(vi)(Change in volume) |
- |
1700 |
|
The charge for this test is already included. It's repeated |
| Cl. No. 4.4, table no. 1(vii)(Compression set) |
- |
3600 |
|
The charge for this test is already included. It's repeated |
| Cl. No. 4.4, table no. 1(viii)(Discolouration) |
- |
1500 |
|
The charge for this test is already included. It's repeated |
| Cl. No. 4.4, table no. 1(ix)(Odour and taste) |
- |
1000 |
|
The charge for this test is already included. It's repeated |
| Cl. No. 4.4, table no. 1(x)(Volatile matter) |
- |
800 |
|
The charge for this test is already included. It's repeated |
| Cl. No. 4.4, table no. 1(xi)("Total zinc oxide, percent
by mass, ") |
- |
4700 |
|
The charge for this test is already included. It's repeated |
| Cl. No. 4.4, table no. 1(xv)("Polycyclic aromatic
hydrocarbons (PAH) Benzo(a)pyrene (BaP)"
Extractables) |
- |
12400 |
|
The charge for this test is already included. It's repeated |
| Cl. No. 4.5, Table no. 2(i)(Antimony) |
- |
1900 |
|
The charge for this test is already included. It's repeated |
| Cl. No. 4.5, Table no. 2(ii)(Arsenic) |
- |
1900 |
|
The charge for this test is already included. It's repeated |
| Cl. No. 4.5, Table no. 2(iii)(Chromium) |
- |
1900 |
|
The charge for this test is already included. It's repeated |
| Cl. No. 4.5, Table no. 2(iv)(Mercury) |
- |
1900 |
|
The charge for this test is already included. It's repeated |
| Cl. No. 4.5, Table no. 2(v)(Cadmium) |
- |
1900 |
|
The charge for this test is already included. It's repeated |
| Cl. No. 4.5, Table no. 2(vi)(Lead) |
- |
1900 |
|
The charge for this test is already included. It's repeated |
| Cl. No. 4.5, Table no. 2(vii)(Barium) |
- |
1900 |
|
The charge for this test is already included. It's repeated |
| Cl. No. 4.5, Table no. 2(viii)(Selenium) |
- |
1900 |
|
The charge for this test is already included. It's repeated |
| Cl. No.4.6(Performance test) |
- |
4800 |
|
The charge for this test is already included. It's repeated |
| Cl. No. 3(Types) |
- |
3800 |
|
The charge for this test is already included. It's repeated |
| Cl. No. 4.4, table no. 1(i)(Hardness) |
- |
1199.99 |
|
The charge for this test is already included. It's repeated |
| Cl. No. 4.4, table no. 1(xii)(N-Nitrosamines,) |
- |
10000 |
|
The charge for this test is already included. It's repeated |
| Cl. No. 4.4, table no. 1(xiii)(N-Nitrosatables) |
- |
10000 |
|
The charge for this test is already included. It's repeated |
| Cl. No. 4.2(Workmanship and Finish) |
- |
0 |
|
The charge for this test is already included. It's repeated |
| Cl. No. 4.4, table no. 1(i)(Hardness) |
- |
0 |
|
The charge for this test is already included. It's repeated |
| Cl. No. 4.4, table no. 1(ii)(Tensile strength) |
- |
0 |
|
The charge for this test is already included. It's repeated |
| Cl. No. 4.4, table no. 1(iii)(Elongation at break) |
- |
0 |
|
The charge for this test is already included. It's repeated |
| Cl. No. 4.4, table no. 1(iv)("Hardness, Tensile strength, Elongation at break) |
- |
0 |
|
The charge for this test is already included. It's repeated |
| Cl. No. 4.4, table no. 1(v)("Hardness, Tensile strength, Elongation at break
percent") |
- |
0 |
|
The charge for this test is already included. It's repeated |
| Cl. No. 4.4, table no. 1(vi)(Change in volume) |
- |
0 |
|
The charge for this test is already included. It's repeated |
| Cl. No. 4.4, table no. 1(vii)(Compression set) |
- |
0 |
|
The charge for this test is already included. It's repeated |
| Cl. No. 4.4, table no. 1(viii)(Discolouration) |
- |
0 |
|
The charge for this test is already included. It's repeated |
| Cl. No. 4.4, table no. 1(ix)(Odour and taste) |
- |
0 |
|
The charge for this test is already included. It's repeated |
| Cl. No. 4.4, table no. 1(x)(Volatile matter) |
- |
0 |
|
The charge for this test is already included. It's repeated |
| Cl. No. 4.4, table no. 1(xi)("Total zinc oxide, percent
by mass, ") |
- |
0 |
|
The charge for this test is already included. It's repeated |
| Cl. No. 4.4, table no. 1(xv)("Polycyclic aromatic
hydrocarbons (PAH) Benzo(a)pyrene (BaP)"
Extractables) |
- |
0 |
|
The charge for this test is already included. It's repeated |
| Cl. No. 4.5, Table no. 2(i)(Antimony) |
- |
0 |
|
The charge for this test is already included. It's repeated |
| Cl. No. 4.5, Table no. 2(ii)(Arsenic) |
- |
0 |
|
The charge for this test is already included. It's repeated |
| Cl. No. 4.5, Table no. 2(iii)(Chromium) |
- |
0 |
|
The charge for this test is already included. It's repeated |
| Cl. No. 4.5, Table no. 2(iv)(Mercury) |
- |
0 |
|
The charge for this test is already included. It's repeated |
| Cl. No. 4.5, Table no. 2(v)(Cadmium) |
- |
0 |
|
The charge for this test is already included. It's repeated |
| Cl. No. 4.5, Table no. 2(vi)(Lead) |
- |
0 |
|
The charge for this test is already included. It's repeated |
| Cl. No. 4.5, Table no. 2(vii)(Barium) |
- |
0 |
|
The charge for this test is already included. It's repeated |
| Cl. No.4.6(Performance test) |
- |
0 |
|
The charge for this test is already included. It's repeated |
| Cl. No. 3(Types) |
- |
0 |
|
The charge for this test is already included. It's repeated |
| Cl. No. 4.4, table no. 1(xv)("Polycyclic aromatic
hydrocarbons (PAH) Benzo(a)pyrene (BaP)") |
- |
0 |
|
The charge for this test is already included. It's repeated |
| Cl. No. 4.4, table no. 1(xii)(N-Nitrosamines,) |
- |
0 |
|
The charge for this test is already included. It's repeated |
| Cl. No. 4.4, table no. 1(xiv)(Extractables) |
- |
0 |
|
The charge for this test is already included. It's repeated |
| Cl. No. 4.4, table no. 1(viii)(Discolouration) |
- |
0 |
|
- |
| Cl. No. 4.5, Table no. 2(i)(Antimony) |
- |
0 |
|
- |
| Cl. No. 4.4, table no. 1(xiv)(Extractables) |
- |
12400 |
|
- |
| Cl. No. 4.3(Dimensions) |
- |
1800 |
|
The charge for this test is already included. It's repeated |
| Cl. No. 4.2(Workmanship and Finish) |
- |
0 |
|
- |
| Cl. No. 4.4, table no. 1(i)(Hardness) |
- |
0 |
|
- |
| Cl. No. 4.4, table no. 1(ii)(Tensile strength) |
- |
0 |
|
- |
| Cl. No. 4.4, table no. 1(iii)(Elongation at break) |
- |
0 |
|
- |
| Cl. No. 4.4, table no. 1(iv)("Hardness, Tensile strength, Elongation at break) |
- |
0 |
|
- |
| Cl. No. 4.4, table no. 1(v)("Hardness, Tensile strength, Elongation at break
percent") |
- |
0 |
|
- |
| Cl. No. 4.4, table no. 1(vi)(Change in volume) |
- |
0 |
|
- |
| Cl. No. 4.4, table no. 1(vii)(Compression set) |
- |
0 |
|
- |
| Cl. No. 4.4, table no. 1(ix)(Odour and taste) |
- |
0 |
|
- |
| Cl. No. 4.4, table no. 1(x)(Volatile matter) |
- |
0 |
|
- |
| Cl. No. 4.4, table no. 1(xi)("Total zinc oxide, percent
by mass, ") |
- |
0 |
|
- |
| Cl. No. 4.4, table no. 1(xv)("Polycyclic aromatic
hydrocarbons (PAH) Benzo(a)pyrene (BaP)"
Extractables) |
- |
0 |
|
- |
| Cl. No. 4.5, Table no. 2(ii)(Arsenic) |
- |
0 |
|
- |
| Cl. No. 4.5, Table no. 2(iii)(Chromium) |
- |
0 |
|
- |
| Cl. No. 4.5, Table no. 2(iv)(Mercury) |
- |
0 |
|
- |
| Cl. No. 4.5, Table no. 2(v)(Cadmium) |
- |
0 |
|
- |
| Cl. No. 4.5, Table no. 2(vi)(Lead) |
- |
0 |
|
- |
| Cl. No. 4.5, Table no. 2(vii)(Barium) |
- |
0 |
|
- |
| Cl. No.4.6(Performance test) |
- |
0 |
|
- |
| Cl. No. 3(Types) |
- |
0 |
|
- |
| Cl. No. 4.4, table no. 1(xv)("Polycyclic aromatic
hydrocarbons (PAH) Benzo(a)pyrene (BaP)") |
- |
0 |
|
- |
| Cl. No. 4.4, table no. 1(xii)(N-Nitrosamines,) |
- |
0 |
|
- |
| Cl. No. 4.4, table no. 1(xiv)(Extractables) |
- |
0 |
|
- |
| Cl. No. 4.3(Dimensions) |
- |
0 |
|
- |
|
30 Jun, 2029 |
-
- |
| 46 |
INDIAN RUBBER MATERIALS RESEARCH INSTITUTE (IRMRI)
| 7119305
| IS 2494 : Part 2 (1993) |
V - Belts - Endless V - Belts for industrial purposes: Part 2 fire resistant and antistatic V - Belts - Specification |
- |
17300 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 7.1(Fire Resistance Test) |
- |
2200 |
|
- |
| 7.2(Electrical Resistance Test) |
- |
4000 |
|
- |
| 7.3(Tensile Test) |
- |
3400 |
|
- |
| 7.1(Fire Resistance Test) |
- |
2200 |
|
- |
| 7.2(Electrical Resistance Test) |
- |
4000 |
|
- |
| 7.3(Tensile Test) |
- |
3400 |
|
- |
| 5(Requirements) |
- |
7700 |
|
- |
|
30 Jun, 2029 |
-
- |
| 47 |
INDIAN RUBBER MATERIALS RESEARCH INSTITUTE (IRMRI)
| 7119305
| IS 9873 : Part 1 (2019) |
Safety of toys: Part 1 safety aspects related to mechanical and physical properties (Fourth Revision) |
Toy |
3000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4.25 - 5.19(Liquid-filled toys-leakage of liquid-filled toys) |
- |
500 |
|
-- |
| 4.5.4 - 5.6(Shape, size and strength of certain toys- Pre-school play figures-Test for pre-school play figures) |
- |
500 |
|
-- |
| 4.18.2(d) - 5.37(Projectile toys-Projectiles-length of suction cup projectiles) |
- |
500 |
|
-- |
| 4.2 - 5.24.2( Reasonably foreseeable abuse -Drop Test) |
- |
500 |
|
-- |
| 4.15.1.2 - 5.12.3( Stability and overload requirements-Stability of ride-on toys and seats-Sideways stability, feet unavailable for stabilization) |
- |
500 |
|
-- |
| 4.3.2 - 5.21( Expanding materials) |
- |
500 |
|
-- |
| 4.2 - 5.24.7( Reasonably foreseeable abuse -Compression test) |
- |
500 |
|
-- |
| 4.2 - 5.24.8.2( Reasonably foreseeable abuse-Flexure test-Wires and other metallic components intended to be bent) |
- |
500 |
|
-- |
| 4.2 - 5.24.6.2( Reasonably foreseeable abuse -Tension test for seams in soft-filled (stuffed) toys. beanbag-type toys, and other similar filled toys) |
- |
500 |
|
-- |
| 4.2 - 5.24.4( Reasonably foreseeable abuse -Dynamic strength test for wheeled ride-on toys other than toy scooters) |
- |
500 |
|
-- |
| 4.2 - 5.24.3( Reasonably foreseeable abuse -Tip-over test for large and bulky toys) |
- |
500 |
|
-- |
| 4.30.3 - 5.26 - 5.8(Toy scooters-Strength-After static strength for toy scooters- sharp edge test) |
- |
500 |
|
-- |
| 4.30.3 - 5.26 - 5.9(Toy scooters-Strength-static strength for toy scooters-sharp-point test) |
- |
500 |
|
-- |
| 4.5.2 - 5.4(Shape, size and strength of certain toys-Small balls-Small balls test) |
- |
500 |
|
-- |
| 4.15.1.3 - 5.12.4( Stability and overload requirements-Stability of ride-on toys and seats-Fore and aft stability Test) |
- |
500 |
|
-- |
| 4.15.1.1 - 5.12.2( Stability and overload requirements-Stability of ride-on toys and seats-Sideways stability, feet available for stabilization) |
- |
500 |
|
-- |
| 4.15.3 - 5.12.6( Stability and overload requirements-Stability of stationary floor toy-Stability test of stationary floor toys) |
- |
500 |
|
-- |
| 4.15.2 - 5.12.5( Stability and overload requirements-Overload requirements for ride-on toys and seats-overload test for ride-on toys and seats) |
- |
500 |
|
-- |
| 4.30.3 - 5.26(Toy scooters-Strength-static strength for toy scooters) |
- |
500 |
|
-- |
| 4.11.8 - 5.11.5(Cords- Self-retracting cords intended for children under 36 months-self-retracting cords) |
- |
500 |
|
-- |
| 4.5.3 - 5.5(Shape, size and strength of certain toys-Pompoms-Test for pompoms) |
- |
500 |
|
-- |
| 4.5.1.2 - 5.3(Shape, size and strength of certain toys-Squeeze toys, rattles, and certain other toys and components of toys-Test for shape and size of certain toys) |
- |
500 |
|
-- |
| 4.31.2(a) - 5.32(Magnets and magnetic components-All other toys with magnets and magnetic components-small parts test) |
- |
500 |
|
-- |
| 4.18.2(a) - 5.36(Projectile toys-Projectiles-tip assessment of rigid projectiles) |
- |
500 |
|
-- |
| 4.18.2(b)(Projectile toys-Projectiles) |
- |
500 |
|
-- |
| 4.18.2(c)(Projectile toys-Projectiles) |
- |
500 |
|
-- |
| 4.18.2(c)(Projectile toys-Projectiles-Radius) |
- |
500 |
|
-- |
| 4.18.2(d) - 5.37(Projectile toys-Projectiles-length of suction cup projectiles) |
- |
500 |
|
-- |
| 4.18.2(d) - 5.37 - 5.24.5(Projectile toys-Projectiles-length of suction cup projectiles After torque test) |
- |
500 |
|
-- |
| 4.18.2(d) - 5.37 - 5.24.6.5(Projectile toys-Projectiles-length of suction cup projectiles After tension test for a projectile with a suction cup) |
- |
500 |
|
-- |
| 4.18.2 - e - 5.24.5(Projectile toys-Projectiles-torque test) |
- |
500 |
|
-- |
| 4.18.2 - e - 5.24.6.5(Projectile toys-Projectiles-tension test for a projectile with a suction cup) |
- |
500 |
|
-- |
| 4.18.3(a) - 5.2(Projectile toys-Projectile toys with stored energy-small parts test) |
- |
500 |
|
-- |
| 4.18.3(a) - 5.3 - 5.24(Projectile toys-Projectile toys with stored energy-small parts test after reasonably foreseeable abuse testing) |
- |
500 |
|
-- |
| 4.18.3(a) - 5.4(Projectile toys-Projectile toys with stored energy--small parts test after (wall impact test for projectiles) |
- |
500 |
|
-- |
| 4.18.3(b)(Projectile toys-Projectile toys with stored energy) |
- |
500 |
|
-- |
| 4.18.3(b) - 5.15.1.3.3(Projectile toys-Projectile toys with stored energy-determination of kinetic energy per area of contact) |
- |
500 |
|
-- |
| 4.18.3(c ) - 5.24.5(Projectile toys-Projectile toys with stored energy-torque test) |
- |
500 |
|
-- |
| 4.18.3(c ) - 5.24.6.4(Projectile toys-Projectile toys with stored energy- tension test for protective components) |
- |
500 |
|
-- |
| 4.18.3(c )(Projectile toys-Projectile toys with stored energy) |
- |
500 |
|
-- |
| 4.18.3(d) - 5.15.2(Projectile toys-Projectile toys with stored energy-Wall impact test for projectiles) |
- |
500 |
|
-- |
| 4.18.3(e )(Projectile toys-Projectile toys with stored energystored energy-Discharge mechanism) |
- |
500 |
|
-- |
| 4.18.4.1 - 5.20(Projectile toys-Projectile toys without stored energy-Mouth-actuated projectile toys-durability of mouth-actuated toys) |
- |
500 |
|
-- |
| 4.18.4.2(a) - 5.15.1.3.3(Projectile toys-Projectile toys without stored energy-Projectiles in the form of a dart-determination of the kinetic energy per area of contact when the contact area of the dart shall be at least 3 cm^2) |
- |
500 |
|
-- |
| 4.18.4.2(b)(Projectile toys-Projectile toys without stored energy-Projectiles in the form of a dart) |
- |
500 |
|
-- |
| 4.18.4.2(c ) - 5.24.5(Projectile toys-Projectile toys without stored energy-Projectiles in the form of a dart-After torque test) |
- |
500 |
|
-- |
| 4.18.4.2(c ) - 5.24.5(Projectile toys-Projectile toys without stored energy-Projectiles in the form of a dart-Contact area After torque test) |
- |
500 |
|
-- |
| 4.18.4.2(c ) - 5.24.6.4(Projectile toys-Projectile toys without stored energy-Projectiles in the form of a dart-After tension test for protective
components) |
- |
500 |
|
-- |
| 4.18.4.2(c ) - 5.24.6.4(Projectile toys-Projectile toys without stored energy-Projectiles in the form of a dart-Contact area After tension test for protective components) |
- |
500 |
|
-- |
| 4.18.4.3 - 5.15.1.3.3(Projectile toys-Projectile toys without stored energy-Arrows (e.g. bow and arrow set)-kinetic energy per area) |
- |
500 |
|
-- |
| 4.18.4.3 - 5.15.2(Projectile toys-Projectile toys without stored energy-Arrows (e.g. bow and arrow set)-wall impact test for projectiles) |
- |
500 |
|
-- |
| 4.18.4.3(a)(Projectile toys-Projectile toys without stored energy-Arrows (e.g. bow and arrow set) |
- |
500 |
|
-- |
| 4.18.4.3(b)(Projectile toys-Projectile toys without stored energy-Arrows (e.g. bow and arrow set) |
- |
500 |
|
-- |
| 4.18.4.3(c)(Projectile toys-Projectile toys without stored energy-Arrows (e.g. bow and arrow set) |
- |
500 |
|
-- |
| 4.18.4.6 - 5.24.5(Projectile toys-Projectile toys without stored energy-Arrows (e.g. bow and arrow set-After torque test) |
- |
500 |
|
-- |
| 4.18.4.6 - 5.24.5 - 5.15.1.3.3(Projectile toys-Projectile toys without stored energy-Arrows (e.g. bow and arrow set- kinetic energy per area After torque test) |
- |
500 |
|
-- |
| 4.18.4.6 - 5.24.6.4(Projectile toys-Projectile toys without stored energy-Arrows (e.g. bow and arrow set-After tension test for protective
components) |
- |
500 |
|
-- |
| 4.18.4.6 - 5.24.6.4 - 5.15.1.3.3(Projectile toys-Projectile toys without stored energy-Arrows (e.g. bow and arrow set-kinetic energy per area After tension test for protective components) |
- |
500 |
|
-- |
| 4.23 - 5.17(Speed limitation of electrically driven ride-on toys-determination of speed of electrically driven ride-on toys) |
- |
500 |
|
-- |
| 4.24(a) - 5.18(Toys containing a heat source-determination of temperature increases) |
- |
500 |
|
-- |
| 4.24(b) - 5.18(Toys containing a heat source-rise in temperature of handles, knobs and similar parts which are likely to be touched by hand-(Parts made of metals)) |
- |
500 |
|
-- |
| 4.24(b) - 5.18(Toys containing a heat source-rise in temperature of handles, knobs and similar parts which are likely to be touched by hand(Parts made of glass or porcelain)) |
- |
500 |
|
-- |
| 4.24(b) - 5.18(Toys containing a heat source-rise in temperature of handles, knobs and similar parts which are likely to be touched by hand(Parts made of Plastic or wood )) |
- |
500 |
|
-- |
| 4.24(c) - 5.18(Toys containing a heat source- rise in temperature of other accessible parts of the toy(Parts made of metals)) |
- |
500 |
|
-- |
| 4.24(c) - 5.18(Toys containing a heat source- rise in temperature of other accessible parts of the toy( Parts made of other materials)) |
- |
500 |
|
-- |
| 4.22.3 - 5.16.1(Toy bicycles-Braking requirements-determination of free-wheeling
facility) |
- |
500 |
|
-- |
| 4.21(a)(Braking-brake performance for mechanically or electrically
powered ride-on toys other than toy bicycles) |
- |
500 |
|
-- |
| 4.22.3 - 5.16.3(Toy bicycles-Braking requirements- brake performance for toy bicycles) |
- |
500 |
|
-- |
| 4.17 - 5.14(Simulated protective equipment, such as helmets, hats and goggles-Impact test for toys that cover the face) |
- |
500 |
|
-- |
| 4.30.5(a)( Toy scooters-Adjustable and folding steering tubes and handlebars) |
- |
500 |
|
-- |
| 4.30.5(a)( Toy scooters-Adjustable and folding steering tubes and handlebars) |
- |
500 |
|
-- |
| 4.30.5(b)( Toy scooters-Adjustable and folding steering tubes and handlebars) |
- |
500 |
|
-- |
| 4.30.5(c)( Toy scooters-Adjustable and folding steering tubes and handlebars) |
- |
500 |
|
-- |
| 4.30.5(d)( Toy scooters-Adjustable and folding steering tubes and handlebars) |
- |
500 |
|
-- |
| 4.30.5(e)( Toy scooters-Adjustable and folding steering tubes and handlebars) |
- |
500 |
|
-- |
| 4.30.5(f) - 5.30( Toy scooters-Adjustable and folding steering tubes and handlebars-resistance to separation of handlebar) |
- |
500 |
|
-- |
| 4.30.3 - 5.26(Toy scooters-Strength-static strength for toy scooters) |
- |
500 |
|
-- |
| 4.6.1 b(Edges-Accessible sharp edges of glass or metal- gap between the edge and the adjacent surface) |
- |
500 |
|
-- |
| 4.13.1(Holes, clearances and accessibility of mechanisms-Circular holes in rigid materials) |
- |
500 |
|
-- |
| 4.13.2 (Holes, clearances and accessibility of mechanisms-Accessible clearances for movable segments) |
- |
500 |
|
--- |
| 4.13.3(Holes, clearances and accessibility of mechanisms- Chains or belts in ride-on toys) |
- |
500 |
|
-- |
| 4.13.3 - 5.7(Holes, clearances and accessibility of mechanisms- Chains or belts in ride-on toys-accessibility of a part or component) |
- |
500 |
|
--- |
| 4.13.4(Holes, clearances and accessibility of mechanisms-Other driving mechanisms) |
- |
500 |
|
--- |
| 4.13.5(Holes, clearances and accessibility of mechanisms-Winding keys) |
- |
500 |
|
-- |
| 4.7.3 (Wooden toys) |
- |
500 |
|
-- |
|
30 Jun, 2029 |
-
- |
| 48 |
INDIAN RUBBER MATERIALS RESEARCH INSTITUTE (IRMRI)
| 7119305
| IS 9873 : Part 9 (2017) |
Safety of Toys Part 9 Certain Phthalates Esters in Toys and Children's Products |
Toy |
10000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 3.0(Vinyl in toys or childcare articles - a) Bis-(2-ethlyhexyl) Phthalates (DEHP), b) Di-Butyl phthalate (DBP), c) Benzyl butyl Phthalate (BBP) - IS 9873 Part 6) |
- |
5000 |
|
-- |
| 3.0(Vinyl in any part of the toy or childcare article that can be placed in mouth of a child under 4 years of age - a) Di-iso-Nonyl Phthalate (DINP), b) Di-iso-Decyl Phthalate (DIDP), c) Di-n-Octyl Phthalate (DNOP) - IS 9873 Part 6) |
- |
5000 |
|
--- |
|
30 Jun, 2029 |
-
- |
| 49 |
INDIAN RUBBER MATERIALS RESEARCH INSTITUTE (IRMRI)
| 7119305
| IS 9873 : Part 3 (2020) |
Safety of Toys Part 3 Migration of Certain Elements ( Third Revision ) |
- |
12000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4.1 - Table 1(Selenium (Se) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010) |
- |
1500 |
|
-- |
| 4.1 - Table 1(Mercury (Hg) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010) |
- |
1500 |
|
-- |
| 4.1 - Table 1(Lead (Pb) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010) |
- |
1500 |
|
-- |
| 4.1 - Table 1(Chromium (Cr) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010) |
- |
1500 |
|
-- |
| 4.1 - Table 1(Cadmium (Cd) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010) |
- |
1500 |
|
-- |
| 4.1 - Table 1(Barium (Ba) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010) |
- |
1500 |
|
-- |
| 4.1 - Table 1(Arsenic (As) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010) |
- |
1500 |
|
-- |
| 4.1 - Table 1(Antimony (Sb) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010) |
- |
1500 |
|
-- |
|
30 Jun, 2029 |
-
- |
| 50 |
INDIAN RUBBER MATERIALS RESEARCH INSTITUTE (IRMRI)
| 7119305
| IS 12118 : Part 1 (1987) |
Specification for two - Part polysulphide - Based sealants: Part 1 general requirements |
Pouring Grade |
71000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 5.1.1.1(Pouring Grade Sealants) |
- |
11300 |
|
-- |
| 5.1.2(Plastic Deformation) |
- |
11300 |
|
-- |
| 5.1.3(Adhesion and Tensile Modulus) |
- |
11300 |
|
-- |
| 5.1.4(Application Life) |
- |
11300 |
|
-- |
| 5.1.5(Adhesion in Peel) |
- |
11300 |
|
---- |
| 5.1.6(Loss of Mass after Heat Ageing) |
- |
11300 |
|
----- |
| 5.1.7(Staining ) |
- |
11300 |
|
----- |
| 5.1.1.2(Gun Grade Sealant ) |
- |
4000 |
|
----- |
|
30 Jun, 2029 |
-
- |
| 51 |
INDIAN RUBBER MATERIALS RESEARCH INSTITUTE (IRMRI)
| 7119305
| IS 9873 : Part 2 (2017) |
Safety of toys: Part 2 flammability (Third Revision) |
Flammability (Safety of Toys) |
3000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4.2.2-5.2(Toys to be worn on the head-Beards, moustaches, wigs, etc. made from hair, pile, or material that behaves in a similar manner to hair (e.g. free-hanging ribbons, paper, cloth strands, or other flowing elements), which protrude 50 mm or more from the surface of the toy-Duration of the flame after the removal of the test flame) |
- |
3000 |
|
--- |
| 4.2.3-5.3(Toys to be worn on the head-Beards, moustaches, wigs, etc. made from hair, pile, or material that behaves in a similar manner to hair (e.g. free-hanging ribbons, paper, cloth strands, or other flowing elements), which protrude less than 50 mm and more than 5 mm from the surface of the toy-Duration of the flame after the removal of the test flame) |
- |
3000 |
|
-- |
| 4.2.5-5.4(Toys to be worn on the head-Flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks)-rate of spread of flame) |
- |
3000 |
|
-- |
| 4.5-5.5(Soft-filled toys-Test for soft-filled toys
) |
- |
3000 |
|
-- |
|
30 Jun, 2029 |
-
- |
| 52 |
INDIAN RUBBER MATERIALS RESEARCH INSTITUTE (IRMRI)
| 7119305
| IS 446 (2017) |
Rubber hoses, textile - Reinforced, for compressed air - Specification (Fifth Revision) |
RUBBER AIR HOSE |
34170 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 5(Material and Construction) |
- |
900 |
|
-- |
| 6, Dimensions(Internal Diameter) |
- |
300 |
|
-- |
| 6, Dimensions(Concentricity) |
- |
500 |
|
-- |
| 6, Dimensions(Tolerance on Length) |
- |
300 |
|
--- |
| 6, Dimensions(Thickness of Lining of Type 1) |
- |
300 |
|
--- |
| 6, Dimensions(Thickness of Lining of Type 2) |
- |
300 |
|
-- |
| 6, Dimensions(Thickness of Lining of Type 3) |
- |
300 |
|
-- |
| 6, Dimensions(Thickness of Cover of Type 1) |
- |
300 |
|
-- |
| 6, Dimensions(Thickness of Cover of Type 2) |
- |
300 |
|
--- |
| 6, Dimensions(Thickness of Cover of Type 3) |
- |
300 |
|
-- |
| 7.1, Table 2(Tensile Strength of Lining) |
- |
950 |
|
-- |
| 7.1, Table 2(Tensile Strength of Cover) |
- |
950 |
|
-- |
| 7.1, Table 2(Elongation at Break of Lining of all types) |
- |
0 |
|
-- |
| 7.1, Table 2(Elongation at Break of Cover of all types) |
- |
0 |
|
-- |
| 7.1, Table 2(Accelerated Ageing for all types: Change in Tensile Strength of Lining of its original value) |
- |
1550 |
|
-- |
| 7.1, Table 2(Accelerated Ageing for all types: Change in Tensile Strength of Cover of its original value) |
- |
1550 |
|
-- |
| 7.1, Table 2(Accelerated Ageing for all types: Change in Elongation of Lining of its original value) |
- |
0 |
|
-- |
| 7.1, Table 2(Accelerated Ageing for all types: Change in Elongation of Cover of its original value) |
- |
0 |
|
--- |
| 7.1, Table 2(Resistance to Liquid , Increase in Volume (Class B only)-Lining) |
- |
850 |
|
--- |
| 7.1, Table 2(Resistance to Liquid , Increase in Volume (Class C only)-Lining) |
- |
850 |
|
-- |
| 7.1, Table 2(Resistance to Liquid , Increase in Volume (Class C only)-Cover) |
- |
850 |
|
-- |
| 7.2, Table 3(Adhesion between Components- Lining and Reinforcement) |
- |
1050 |
|
-- |
| 7.2, Table 3(Adhesion between Components- Reinforcement layers) |
- |
1050 |
|
-- |
| 7.2, Table 3(Adhesion between Components- Cover and Reinforcement) |
- |
1050 |
|
-- |
| 7.2, Table 3(Proof Pressure at 23°C for type 1) |
- |
1950 |
|
-- |
| 7.2, Table 3(Proof Pressure at 23°C for type 2) |
- |
1950 |
|
-- |
| 7.2, Table 3(Proof Pressure at 23°C for type 3) |
- |
1950 |
|
-- |
| 7.2, Table 3(Change in Length at Maximum working Pressure) |
- |
1950 |
|
--- |
| 7.2, Table 3(Change in Diameeter at Maximum working Pressure) |
- |
0 |
|
--- |
| 7.2, Table 3(Minimum Bursting Pressure for type 1) |
- |
1950 |
|
-- |
| 7.2, Table 3(Minimum Bursting Pressure for type 2) |
- |
1950 |
|
-- |
| 7.2, Table 3(Minimum Bursting Pressure for type 3) |
- |
1950 |
|
-- |
| 7.2, Table 3(Ozone Resistance) |
- |
2520 |
|
-- |
| 7.2, Table 3(Low temperature Flexibility) |
- |
1950 |
|
-- |
| 7.2, Table 3(Flexibility at 23°C) |
- |
1550 |
|
-- |
|
30 Jun, 2029 |
-
- |
| 53 |
INDIAN RUBBER MATERIALS RESEARCH INSTITUTE (IRMRI)
| 7119305
| IS 9573 : Part 2 (2017) |
Rubber hose for liquefied petroleum gas (Lpg) - Specification: Part 2 domestic and commercial application (Fourth Revision) |
Rubber Hose for LPG-Specific Part 2 Domestic/Commercial |
18600 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Clause 4.1(General) |
- |
300 |
|
-- |
| Clause 4.2.2 (a)(Reinforcement) |
- |
300 |
|
-- |
| Clause 4.3
Sub Clause 4.3.1
Table 1(Bore Size) |
- |
300 |
|
--- |
| Clause 4.3
Sub Clause 4.3.2 (a)(Thickness of Lining and Cover) |
- |
300 |
|
-- |
| Clause 4.3
Sub Clause 4.3.3(Length) |
- |
300 |
|
-- |
| Clause 4.4
Sub Clause 4.4.1
Table 2 (i) (a)(Tensile Strength- Lining) |
- |
950 |
|
-- |
| Clause 4.4
Sub Clause 4.4.1
Table 2 (i) (b)(Tensile Strength- cover) |
- |
950 |
|
-- |
| Clause 4.4
Sub Clause 4.4.1
Table 2 (ii) (a)(Elongation at break- Lining) |
- |
0 |
|
-- |
| Clause 4.4
Sub Clause 4.4.1
Table 2 (ii) (b)(Elongation at break- Cover) |
- |
0 |
|
---- |
| Clause 4.4
Sub Clause 4.4.2
(a)(Accelerated Ageing Test lining) |
- |
1550 |
|
-- |
| Clause 4.4
Sub Clause 4.4.2
(b)(Accelerated Ageing Test lining) |
- |
0 |
|
-- |
| Clause 4.4
Sub Clause 4.4.2
(a)(Accelerated Ageing Test cover) |
- |
1550 |
|
-- |
| Clause 4.4
Sub Clause 4.4.2
(b)(Accelerated Ageing Test cover) |
- |
0 |
|
-- |
| Clause 4.4
Sub Clause 4.4.3
(a)(Resistance of Lining to n-pentane) |
- |
1800 |
|
-- |
| Clause 4.5
Sub clause 4.5.1(Adhesion) |
- |
1050 |
|
-- |
| Clause 4.5
Sub clause 4.5.2(Low Temperature Flexibility) |
- |
1950 |
|
-- |
| Clause 4.5
Sub clause 4.5.3(Flexibility of Hose) |
- |
1050 |
|
-- |
| Clause 4.5
Sub clause 4.5.4(Ozone Resistance) |
- |
750 |
|
--- |
| Clause 4.5
Sub clause 4.5.5
4.5.5.1(Proof pressure test) |
- |
1950 |
|
--- |
| Clause 4.5
Sub clause 4.5.5
4.5.5.2(Bursting pressure) |
- |
1950 |
|
-- |
| Clause 4.5
Sub clause 4.5.7(Burning Behaviour) |
- |
1050 |
|
-- |
| Clause 5.2
(a)(Marking
Manufacturer’s name or trade-mark, if any
) |
- |
300 |
|
-- |
| Clause 5.2
(b)(Marking
Words LPG, Max W.P. 1.0 MPa;
) |
- |
0 |
|
-- |
| Clause 5.2
(c)(Marking
Nominal bore, 1000111) |
- |
0 |
|
-- |
| Clause 5.2
(d)(Marking
Batch/Lot No.
) |
- |
0 |
|
-- |
| Clause 5.2
(e)(Marking
Month and year of manufacture
) |
- |
0 |
|
-- |
| Clause 5.2
(f)(Marking
IS 9573 (Part 2)
) |
- |
0 |
|
-- |
| Clause 5.2
(f)(Marking
ecommended to replace before (MONTH/YEAR)
) |
- |
0 |
|
-- |
| Clause 5.2.1(BIS Certification Marking
) |
- |
0 |
|
-- |
| Clause 4.5
Sub clause 4.5.6(Grip Strength Test) |
- |
250 |
|
-- |
|
30 Jun, 2029 |
-
- |
| 54 |
INDIAN RUBBER MATERIALS RESEARCH INSTITUTE (IRMRI)
| 7119305
| IS 9573 : Part 1 (2017) |
Rubber hose for liquefied petroleum gas (Lpg) - Specification: Part 1 industrial application (Fourth Revision) |
Rubber Hose for LPG-Specification Part 1 Industrial App |
21420 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Clause 4.1 (General) |
- |
300 |
|
--- |
| Clause 4.2.2(Reinforcement) |
- |
300 |
|
--- |
| Clause 4.3
Sub Clause 4.3.1
Table 1(Bore Size) |
- |
300 |
|
--- |
| Clause 4.3
Sub Clause 4.3.2 (a)(Thickness of Lining and Cover) |
- |
300 |
|
-- |
| Clause 4.3
Sub Clause 4.3.3(Length) |
- |
300 |
|
--- |
| Clause 4.4
Sub Clause 4.4.1
Table 2 (i) (a)(Tensile Strength- Lining) |
- |
950 |
|
--- |
| Clause 4.4
Sub Clause 4.4.1
Table 2 (i) (b)(Tensile Strength- cover) |
- |
950 |
|
--- |
| Clause 4.4
Sub Clause 4.4.1
Table 2 (ii) (a)(Elongation at break- Lining) |
- |
0 |
|
-- |
| Clause 4.4
Sub Clause 4.4.1
Table 2 (ii) (b)(Elongation at break- cover) |
- |
0 |
|
-- |
| Clause 4.4
Sub Clause 4.4.2
(a)(Accelerated Ageing Test lining) |
- |
1550 |
|
-- |
| Clause 4.4
Sub Clause 4.4.2
(b)(Accelerated Ageing Test lining) |
- |
0 |
|
-- |
| Clause 4.4
Sub Clause 4.4.2
(a)(Accelerated Ageing Test cover) |
- |
1550 |
|
-- |
| Clause 4.4
Sub Clause 4.4.2
(b)(Accelerated Ageing Test cover) |
- |
0 |
|
-- |
| Clause 4.5
Sub clause 4.5.1(Adhesion) |
- |
1050 |
|
-- |
| Clause 4.5
Sub clause 4.5.2(Low Temperature Flexibility) |
- |
1950 |
|
--- |
| Clause 4.5
Sub clause 4.5.3(Flexibility of Hose) |
- |
1050 |
|
-- |
| Clause 4.4
Sub Clause 4.4.3
(a)(Resistance of Lining to n-pentane) |
- |
1800 |
|
-- |
| Clause 4.5
Sub clause 4.5.6(Electrical Continuity Test) |
- |
1300 |
|
-- |
| Clause 4.5
Sub clause 4.5.4(Ozone Resistance) |
- |
2520 |
|
--- |
| Clause 4.5
Sub clause 4.5.5
4.5.5.1(Proof pressure test) |
- |
1950 |
|
-- |
| Clause 4.5
Sub clause 4.5.5
4.5.5.2(Bursting pressure) |
- |
1950 |
|
-- |
| Clause 4.5
Sub clause 4.5.7(Burning Behaviour) |
- |
1050 |
|
-- |
| Clause 5.2
(a)(Marking
Manufacturer’s name or trade-mark, if any
) |
- |
300 |
|
-- |
| Clause 5.2
(b)(Marking
Words LPG, Max W.P. 2.5 MPa;
) |
- |
0 |
|
--- |
| Clause 5.2
(c)(Marking
Nominal bore
) |
- |
0 |
|
-- |
| Clause 5.2
(d)(Marking
Batch/Lot No.
) |
- |
0 |
|
-- |
| Clause 5.2
(e)(Marking
Month and year of manufacture
) |
- |
0 |
|
-- |
| Clause 5.2
(f)(Marking
IS 9573 (Part 1)
) |
- |
0 |
|
-- |
| Clause 5.2.1(BIS Certification Marking
) |
- |
0 |
|
-- |
|
30 Jun, 2029 |
-
- |
| 55 |
INDIAN RUBBER MATERIALS RESEARCH INSTITUTE (IRMRI)
| 7119305
| IS 5382 (2018) |
Rubber seals - Joint rings for water supply, drainage and sewerage pipelines - Specification for materials (Second Revision) |
Rubber Seals-Joint Rings for Water Supply, Drainage |
81320 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4.2.1(Dimensional tolerances) |
- |
600 |
|
-- |
| 4.2.2(Imperfections and defects) |
- |
0 |
|
-- |
| 4.2.3(Hardness, IRHD from buttons ) |
- |
1200 |
|
--- |
| 4.2.4(Tensile strength, MPa) |
- |
1900 |
|
-- |
| 4.2.2(i)In zones involved in sealing function) |
- |
0 |
|
-- |
| 4.2.2(ii) In zones not involved in sealing function) |
- |
0 |
|
--- |
| 4.2.5(Compression set in air) |
- |
0 |
|
-- |
| 4.2.5.2(Compression set at 23 ºC for 72 h) |
- |
5600 |
|
-- |
| 4.2.5.2(Compression set at 70 ºC for 24 h) |
- |
3400 |
|
-- |
| 4.2.5.3(Low temp compression set at -10 ºC for 72 h) |
- |
14840 |
|
-- |
| 4.2.6(Ageing 7 days at 70 ºC) |
- |
5600 |
|
-- |
| 4.2.6(Hardness, IRHD from buttons
Tensile strength, %
Elongation at break , %
) |
- |
3100 |
|
-- |
| 4.2.7(Stress relaxation, max) |
- |
14700 |
|
for 7 days |
| 4.2.8(Volume change in water , max/min
7 days at 70 ºC
) |
- |
7300 |
|
-- |
| 4.2.9(Ozone resistance) |
- |
10080 |
|
-- |
| 4.2.10(Spliced joint) |
- |
1800 |
|
-- |
| 4.2.10.2(Strength of Spliced Joints) |
- |
0 |
|
--- |
| 4.3.1(Low temperature performance - 25 degree C) |
- |
3900 |
|
--- |
| 4.3.2(Volume change in oil) |
- |
7300 |
|
--- |
|
30 Jun, 2029 |
-
- |
| 56 |
INDIAN RUBBER MATERIALS RESEARCH INSTITUTE (IRMRI)
| 7119305
| IS 3565 (2018) |
Teats for feeding bottles - Specification (First Revision) |
TEATS FOR FEEDING BOTTLES |
33000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Clause 5.3.1 Table 1 (iii) (Ash content) |
- |
950 |
|
-- |
| Clause 5.3.1 Table 1 (ii) (b) (Free sulphur) |
- |
2500 |
|
--- |
| Clause 5.2 ( sub clause 5.2.1)(Workmanship and Finish ) |
- |
300 |
|
-- |
| Clause 5.2 ( sub clause 5.2.2)(Shape & Size ) |
- |
0 |
|
-- |
| Clause 5.2 ( sub clause 5.2.3) Annex A.(Resistance to Autoclaving ) |
- |
1800 |
|
-- |
| Clause 5.3 ( sub clause 5.3.1)Requirement as per Table 1/ i Annex B(Water Extract a) pH) |
- |
500 |
|
--- |
| Clause 5.3 ( sub clause 5.3.1)Requirement as per Table 1/ i Annex B(b) Colour) |
- |
300 |
|
---- |
| Clause 5.3 ( sub clause 5.3.1)Requirement as per Table 1/ i Annex B(c) Turbidity
) |
- |
0 |
|
--- |
| Clause 5.3 ( sub clause 5.3.1)Requirement as per Table 1/ i Annex B(d) Odour) |
- |
0 |
|
--- |
| Clause 5.3 ( sub clause 5.3.1)Requirement as per Table 1/ ii Annex C(Acetone extract, percent: a) Acetone extracted material, percent by mass, Max) |
- |
1750 |
|
---- |
| Clause 5.3 ( sub clause 5.3.1)Requirement as per Table 1/ iv Annex E(Volatile components, percent Max) |
- |
500 |
|
---- |
| Clause 5.3 ( sub clause 5.3.3)Requirement as per Table 3/ i(Migration of Heavy Metals i) Antimony) |
- |
1400 |
|
--- |
| Clause 5.3 ( sub clause 5.3.3)Requirement as per Table 3/ i(ii) Arsenic) |
- |
750 |
|
--- |
| Clause 5.3 ( sub clause 5.3.3)Requirement as per Table 3/ i(iii) Chromium) |
- |
750 |
|
-- |
| Clause 5.3 ( sub clause 5.3.3)Requirement as per Table 3/ i(iv) Mercury) |
- |
750 |
|
--- |
| Clause 5.3 ( sub clause 5.3.3)Requirement as per Table 3/ i(v) Cadmium) |
- |
750 |
|
--- |
| Clause 5.3 ( sub clause 5.3.3)Requirement as per Table 3/ i(vi) Lead) |
- |
750 |
|
--- |
| Clause 5.3 ( sub clause 5.3.3)Requirement as per Table 3/ i(vii) Barium) |
- |
750 |
|
-- |
| Clause 5.3 ( sub clause 5.3.3)Requirement as per Table 3/ i(viii) Selenium) |
- |
750 |
|
-- |
| Clause 5.3 ( sub clause 5.3.4)Requirement as per Table 4/ i Annex G(i) N-Nitrosamines) |
- |
5000 |
|
-- |
| Clause 5.3 ( sub clause 5.3.4)Requirement as per Table 4/ ii Annex G(ii) N-Nitrosatables) |
- |
0 |
|
-- |
| Clause 5.3 ( sub clause 5.3.1)Requirement as per Table 1/ ii Annex C(Acetone extract, percent: a) Acetone extracted material, percent by mass, Max) |
- |
1750 |
|
-- |
| Clause 5.3.1 Table 1 (v) (Extractable protein content) |
- |
2400 |
|
-- |
| 5.3.5(Determination of MBT) |
- |
2400 |
|
-- |
| 5.3.6(Determination of Antioxidants) |
- |
2400 |
|
-- |
| Clause 5.4 ( sub clause 5.4.2) Tear Strength Annex K(Tear Strength) |
- |
1900 |
|
--- |
| Clause 5.4 ( sub clause 5.4.3)Tensile Test Annex L(Tensile Test) |
- |
1900 |
|
--- |
|
30 Jun, 2029 |
-
- |
| 57 |
INDIAN RUBBER MATERIALS RESEARCH INSTITUTE (IRMRI)
| 7119305
| IS 12585 (1988) |
Specification for thermoplastic hoses (Textile Reinforced) for water - General purpose |
Specification for Thermoplastic Hoses For water |
7050 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl 4.1(Construction) |
- |
300 |
|
-- |
| Cl 4.2(Dimensions & Tolerances) |
- |
300 |
|
-- |
| Cl 4.3.1 & Appendix A(Loss in Mass on Heating) |
- |
500 |
|
-- |
| Cl 4.3.2(Adhesion) |
- |
950 |
|
-- |
| Cl 4.3.3(Pressure Requirements) |
- |
2000 |
|
-- |
| Cl 4.3.4(Minimum Bend Radius) |
- |
1000 |
|
-- |
| Cl 4.3.5(Low Temperature Flexibility) |
- |
2000 |
|
-- |
|
30 Jun, 2029 |
-
- |
| 58 |
INDIAN RUBBER MATERIALS RESEARCH INSTITUTE (IRMRI)
| 7119305
| IS 4148 (1989) |
Surgical rubber gloves - Specification (First Revision) |
SURGICAL RUBBER GLOVES |
10850 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4.1.4(Manufacture) |
- |
300 |
|
-- |
| 4.2(Dimensions Fig 1 and Table 1) |
- |
300 |
|
-- |
| 4.3(Thickness) |
- |
300 |
|
-- |
| 4.4.1(Physical Properties) |
- |
950 |
|
-- |
| 4.4.2(After accelerated aging at 70 + 1OC for 240 h ) |
- |
4950 |
|
-- |
| 4.4.3(After heat ageing in autoclave) |
- |
2750 |
|
-- |
| 4.4.4(Tension Set) |
- |
800 |
|
-- |
| 4.5(pH of Aqueous Extract ) |
- |
500 |
|
-- |
|
30 Jun, 2029 |
-
- |
| 59 |
INDIAN RUBBER MATERIALS RESEARCH INSTITUTE (IRMRI)
| 7119305
| IS 13098 (2012) |
Automotive vehicles - Tubes for pneumatic tyres - Specification (First Revision) |
AUTOMOTIVE VEHICLES – TUBES FOR PNEUMATIC TYRES |
17800 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 3/3.3(Uniformity(The Thickness shall not vary from the arithmetic mean of the readings by ± 17.5 % at any point in longitudinal direction :-Crown centre,Base centre,Side wall - 1,Side wall - 2)) |
- |
600 |
|
-- |
| 4/4.1.1(Elongation at break (Class A' Tubes)) |
- |
1900 |
|
-- |
| 4/4.1.1(Elongation at break (Class B' Tubes)) |
- |
1900 |
|
-- |
| 4/4.1.2( Strength of Splice (Class A' Tubes)) |
- |
0 |
|
-- |
| 4/4.1.2( Strength of Splice (Class B' Tubes)) |
- |
0 |
|
-- |
| 4/4.1.3 Refer annex B(Set After Ageing(Class A' Tubes)) |
- |
3600 |
|
-- |
| 4/4.1.3 Refer annex B(Set After Ageing(Class B' Tubes)) |
- |
3600 |
|
-- |
| 3/3.1 (for valve refer IS 9081)(MATERIALS, FORM AND FIT) |
- |
0 |
|
--- |
| 4/4.1.4 Refer annex C(Accelerated Ageing(Both Class A and Class B)) |
- |
3500 |
|
-- |
| 5(AIR TIGHTNESS) |
- |
600 |
|
--- |
| 6(MARKING) |
- |
600 |
|
--- |
| 3.2(Tube Material) |
- |
3800 |
|
--- |
| 3.2.1(% Rubber Hydrocarbon Content by volume) |
- |
3800 |
|
--- |
|
30 Jun, 2029 |
-
- |
| 60 |
INDIAN RUBBER MATERIALS RESEARCH INSTITUTE (IRMRI)
| 7119305
| IS 15627 (2022) |
Automotive Vehicles - Pneumatic Tyres for Two and Three - Wheeled Motor Vehicles - Specification First Revision |
- |
97000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 5(Marking) |
- |
500 |
|
- |
| 4.1(Tyre dimension- Section Width) |
- |
1500 |
|
- |
| 4.1(Tyre dimension- Outer diameter) |
- |
1500 |
|
- |
| 4.6(Tread wear Indicator) |
- |
3500 |
|
- |
| 4.4(Tyre strength (Plunger test)) |
- |
10000 |
|
- |
| 4.5(Endurance test) |
- |
57000 |
|
- |
| 4.2(Load & Speed test) |
- |
15000 |
|
- |
| 4.3(Dynamic growth of tyre) |
- |
8000 |
|
- |
| 5(Marking) |
- |
500 |
|
- |
| 4.1(Tyre dimension- Section Width) |
- |
1500 |
|
- |
| 4.1(Tyre dimension- Outer diameter) |
- |
1500 |
|
- |
| 4.6(Tread wear Indicator) |
- |
3500 |
|
- |
| 4.4(Tyre strength (Plunger test)) |
- |
10000 |
|
- |
| 4.5(Endurance test) |
- |
57000 |
|
- |
| 4.2(Load & Speed test) |
- |
15000 |
|
- |
| 4.3(Dynamic growth of tyre) |
- |
8000 |
|
- |
|
30 Jun, 2029 |
-
- |
