BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

15123 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

National Test House (NTH), Alipore, Kolkata-700027

5123904

IS 15769 (2008)

Flux cored (Tubular) electrodes for gas shielded and self - Shielded metal welding of carbon or carbon - Manganese steel

28000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.2(Radiographic Soundness Test)	-	1000	-
5.3 (Table No.- 1)(Tensile Test(T.S., Y.S. & El), Mpa-IS 1608)	-	3000	-
5.4 (Table No.- 2)(Impact Test,J- IS 1757)	-	3000	-
5.5 (Table No.- 1)(Transverse Tensile Test,Mpa (T.S., Y.S. & El))	-	3000	-
5.6(Longitudinal Bend Test)	-	8000	-
5.7(Diffusible Hydrogen Test,ml/100g- IS 11802)	-	5000	-
5.8 (Table No.- 15)(Chemical Composition,%)	-	5000	-
5.2(Radiographic Soundness Test)	-	0	Duplicate clause
5.3 (Table No.- 1)(Tensile Test(T.S., Y.S. & El), Mpa-IS 1608)	-	0	Duplicate clause
5.4 (Table No.- 2)(Impact Test,J- IS 1757)	-	0	Duplicate clause
5.5 (Table No.- 1)(Transverse Tensile Test,Mpa (T.S., Y.S. & El))	-	0	Duplicate clause
5.6(Longitudinal Bend Test)	-	0	Duplicate clause
5.7(Diffusible Hydrogen Test,ml/100g- IS 11802)	-	0	Duplicate clause
5.8 (Table No.- 15)(Chemical Composition,%)	-	0	Duplicate clause

08 Apr, 2027

-
-

National Test House (NTH), Alipore, Kolkata-700027

5123904

IS 14255 (1995)

Aertal bunched cables - For working voltages up to and including 1100 Volts - Specification

20000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Phase/Street Lighting conductor)	-	0	-
4.2(Messenger (Neutral Conductor or Otherwise))	-	0	-
5.1(Insulation)	-	0	-
6.1(Flexibility class)	-	0	-
6.2(Compactness)	-	0	-
6.2(No of strands)	-	0	-
6.2(Surface)	-	0	-
6.3(Protective barrier)	-	0	-
6.4(size of street lighting conductor)	-	0	-
6.5(Size of messenger conductor )	-	0	-
6.6(Joints in messenger conductor )	-	0	-
6.6(Direction of outer layer)	-	0	-
7.1(Insulation)	-	0	-
7.2( Thickness of insulation)	-	250	10% EXTRA FOR EACH CORE
7.3(Tolerance on thickness of insulation )	-	250	10% EXTRA FOR EACH CORE
7.4(Aplication of the insulation )	-	0	-
7.5(Colour of the insulation )	-	0	-
8.1(Core identification)	-	0	-
8.2(Core identification)	-	0	-
8.3(Identification by other means)	-	0	-
9.1(Assembly (Laying up))	-	0	-
9.2(Assembly (Laying up))	-	0	-
9.3(Direction of lay)	-	0	-
10.1 a) i)(Tests on phase/street light conductor: tensile test - Test method IS10810:Part 2)	-	0	-
10.1 a) ii)(Wrapping test - 10810: Part 3)	-	1000	-
10.1 a) iii)(Resistance test - IS10810: Part 5)	-	1000	10% EXTRA FOR EACH CORE
10.1 b) i)(Test on messenger conductor: Breaking load - IS 10810: Part 2)	-	250	-
10.1 b) ii)(Test on messenger conductor: Elongation test - Cl 11.3)	-	250	-
10.1 b) iii)(Test on messenger conductor: Resistance test - IS 10810: Part 5)	-	250	-
10.1 c) i)(Physical tests for XLPE Insulation: Tensile strength - IS 10810: Part 7)	-	250	-
10.1 c) i)(Physical tests for XLPE Insulation: elongation at break - IS 10810: part 7)	-	250	-
10.1 c) ii)(Ageing in air oven : Tensile strength variation - IS 10810:Part 11)	-	250	-
10.1 c) ii)(Ageing in air oven : Elongation variation- IS 10810: Part 11)	-	250	-
10.1 c) iii)(Hot set test: Elongation under load - IS 10810: Part 30)	-	250	-
10.1 c) iii)(Hot set test: Permanent elongation (set) after cooling - IS 10810: Part 30)	-	250	-
10.1 c) iv)(Shrinkage test : Shrinkage - 10810:Part 12)	-	1500	-
10.1 c) iv)(Shrinkage test : Crack Observed - 10810:Part 12)	-	1500	-
10.1 c) v)(Water ahsorption (Gravimetric) - IS 10810: Part 33 )	-	1000	-
10.1 d) i)(Physical test for PE insulation: Tensile strength - IS 10810: Part 7 )	-	250	-
10.1 d) i)(Physical test for PE insulation: elongation at break - IS 10810: Part 7)	-	250	-
10.1 d) ii)(Melt flow index- IS 10810: Part 23)	-	0	-
10.1 d) iv)(Vicat softening point -IS 10810: Part 22)	-	0	-
10.1 f)(Insulation resistance (Volume resistivity) test a) volume resistivity at 27°C - IS 10810: Part 43)	-	1000	10% EXTRA FOR EACH CORE
10.1 f)(Insulation resistance (Volume resistivity) test b) volume resistivity at 70°C - IS 10810: Part 43)	-	1000	10% EXTRA FOR EACH CORE
10.1 g)(High voltage test - IS10810:Part 45)	-	1000	10% EXTRA FOR EACH CORE
6.1(Construction of phase conductor)	-	0	-
6.1(Number of wires (phase conductor))	-	0	-
6.1(Construction of Street Lighting conductor)	-	0	-
6.1(Number of wires (Street Lighting conductor))	-	0	-
12.1(Manufacturer's Identification)	-	0	-
12.2(Cable Identification)	-	0	-
11.4(Bending Test on the Completed Cable ( Optional) )	-	0	-
11.4(Bending Test on the Completed Cable ( Optional))	-	0	-

08 Apr, 2027

-
-

National Test House (NTH), Alipore, Kolkata-700027

5123904

IS 694 (2010)

Polyvinyl chloride insulated unsheathed and sheathed cables/cords with rigid and flexible conductor for rated voltages up to and including 450/750 v (Fourth Revision)

20000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
13(Cable code)	-	100	10% for each extra core
11.2(Legibility)	-	100	10% for each extra core
11.1(Durability)	-	100	10% for each extra core
11(Identification)	-	100	10% for each extra core
10.4(Flammability test- Unaffected portion)	-	250	10% for each extra core
10.4(Flammability test-Burning after flame removal)	-	250	10% for each extra core
table 1 e) 3) (IR constant- max. Temp)	-	500	10% for each extra core
table 1 e) 3) (IR constant- Room temp )	-	500	10% for each extra core
table 1 e) 3) (Volume Resistivity - Maximum temp)	-	500	10% for each extra core
table 1 e) 3) (Volume Resistivity - Room temp )	-	500	10% for each extra core
10.2(HV (room temperature))	-	1000	10% for each extra core
10.1(HV (water immersion))	-	1500	10% for each extra core
10.8(Smoke density rating)	-	3500	10% for each extra core
10.6(Halogen evolution)	-	3500	10% for each extra core
10.7(Temperature index)	-	3500	10% for each extra core
10.5(Oxygen index)	-	3500	10% for each extra core
Table 1 iii) d) 9)(Cold impact for sheath)	-	0	-
Table 1 iii) d) 8)(Cold bend for sheath)	-	0	-
Table 1 iii) c) 9)(Cold impact for insulation)	-	0	-
Table 1 iii) c) 8)(Cold bend for insulation)	-	0	-
Table 1(Category Code)	-	100	10% for each extra core
Table 1 iii) d) 7)(Thermal stability- Sheath )	-	500	10% for each extra core
Table 1 iii) c) 7)(Thermal stability- Insulation )	-	500	10% for each extra core
Table 1 iii) d) 6)(Hot deformation -Indentation depth - Sheath )	-	500	10% for each extra core
Table 1 iii) c) 6)(Hot deformation - Indentation depth- Insulation)	-	500	10% for each extra core
Table 1 iii) d) 5)(Heat shock-Sheath )	-	500	10% for each extra core
Table 1 iii) c) 5)(Heat shock-Insulation )	-	500	10% for each extra core
Table 1 iii) d) 4)(Cracks Observed)	-	250	10% for each extra core
Table 1 iii) d) 4)(Shrinkage- Sheath )	-	250	10% for each extra core
Table 1 iii) c) 4)(Cracks Observed)	-	250	10% for each extra core
Table 1 iii) c) 4)(Shrinkage-Insulation)	-	250	10% for each extra core
Table 1 iii) d) 2)(Loss of mass- Sheath )	-	500	10% for each extra core
Table 1 iii) c) 2)(Loss of mass- Insulation )	-	500	10% for each extra core
Table 1 iii) d) 3)(Sheath- Elongation variation)	-	250	10% for each extra core
Table 1 iii) d) 3)(Sheath- TS variation)	-	250	10% for each extra core
Table 1 iii) d) 3)(Sheath- Elongation (After ageing))	-	250	10% for each extra core
Table 1 iii) d) 3)(Sheath- Tensile strength (After ageing))	-	250	10% for each extra core
Table 1 iii) d) 1)(Sheath- Elongation (Without ageing))	-	350	10% for each extra core
Table 1 iii) d) 1)(Sheath -Tensile strength (Without ageing))	-	350	10% for each extra core
Table 1 iii) c) 1)(Tensile strength (Without ageing))	-	350	10% for each extra core
(Cl. 18.1.4) (Cl. 19.1.5) (Cl. 20.1.4) (Cl. 22.1.4)(Colour of Sheath)	-	50	10% for each extra core
8.3(Thickness of Sheath)	-	100	10% for each extra core
9.1(Ovality)	-	100	10% for each extra core
9(Overall dimensions)	-	100	10% for each extra core
10.11(Per sulphate test (for tinned Cu cable only))	-	100	10% for each extra core
4.2(Conductor resistance test)	-	1500	10% for each extra core
4.1(Wrapping test (for Al))	-	500	-
4.1(Tensile test (for Al)- After Stranding)	-	1000	-
4.1(Tensile test (for Al)-Before Stranding)	-	300	-
4.1(Annealing test (for copper))	-	1000	-
Cl. 8.2(Application of Sheath)	-	100	-
10.9(Additional Ageing Test (for Cables for Outdoor Use)	-	2000	-
10.1(High Voltage Test (Water Immersion Test))	-	1000	10% for each extra core
Table 1 iii) c) 3)(Tensile strength (After ageing))	-	250	10% for each extra core
Table 1 iii) c) 3)(Elongation variation)	-	250	10% for each extra core
Table 1 iii) c) 3)(TS variation)	-	250	10% for each extra core
Table 1 iii) c) 3)(Elongation (After ageing))	-	250	10% for each extra core
Table 1 iii) c) 1)(Elongation (Without ageing))	-	350	10% for each extra core
5.2(Application )	-	100	-
5.3(Thickness of Insulation)	-	100	10% for each extra core
(Cl.6.1.3 of IS 8130:2013)(Flexible Conductors (Classes 5))	-	50	-
(Cl.6.1.3 of IS 8130:2013)( Flexible Conductors (Classes 5))	-	50	-
(Cl.6.1.3 of IS 8130:2013)(Stranded circular non compacted conductors(Class-2))	-	50	-
(Cl.6.1.3 of IS 8130:2013)(Stranded compacted circular conductors and shaped conductors (Class 2))	-	50	-
(Cl.6.1.3 of IS 8130:2013)(Stranded circular non compacted conductors (Class-2))	-	50	-
(Cl.6.1.3 of IS 8130:2013)(Stranded circular non compacted conductors (Class-2))	-	50	-
(Cl.6.1.3 of IS 8130:2013)(Solid Conductor (Class 1))	-	50	-
(Cl.6.1 of IS 8130:2013)(Solid Conductor (Class 1))	-	50	-
(Cl.6.1 of IS 8130:2013)(Solid Conductor (Class 1))	-	50	-
(Cl.16.1) (Cl.19.1)(Conductor- Diameter )	-	100	-
(Cl.16.1) (Cl.19.1)(Conductor)	-	100	-
(Cl.16.1) (Cl.19.1)(Conductor)	-	100	-
(Cl.16.1) (Cl.19.1)(Conductor)	-	100	-
(Cl. 18.1.3) (Cl. 19.1.4) (Cl. 20.1.3) (Cl. 21.1.3) (Cl. 22.1.3)(Assembly of cores )	-	100	-
12(CONSTRUCTION Core Identification)	-	100	-
8.1(Sheath Material )	-	100	-
7(Binder Tape)	-	100	-
6.2(Filler)	-	100	-
6.1(Filler)	-	100	-
5.1(Insulation)	-	100	-
4.4(Joints in Conductor)	-	100	-
4.4(Joints in Conductor)	-	100	-
4.1(Conductor - Material)	-	100	-
4.1(Conductor - Material)	-	100	-
10.11(Persulphate Test )	-	500	-
12.0(Core identification)	-	100	-
4, IS 8130(Construction of conductor)	-	100	-
Table 2, IS 8130(No fo wire in a conductor)	-	100	-
8.3(Minimum thickness of Sheath)	-	100	-
8.3(Avarage thickness of Sheath)	-	100	-
5.3(Minimum thickness of insulation)	-	100	10% for each extra core
5.3(Avarage thickness of insulation)	-	100	10% for each extra core
Table 4(Copper purity test)	-	500	-
10.3(Spark test)	-	0	-
table 1, 4.2(insulation resistance test)	-	100	10% for each extra core
5.4(Mechanical properties before and after ageing)	-	100	10% for each extra core
10.3(Spark Test)	-	0	-
4.1(Material)	-	100	-
4.2(Electrical Resistance)	-	1500	10% for each extra core
5(INSULATION)	-	100	-
6(FILLER)	-	100	-
7(BINDER TAPE)	-	100	-
8(SHEATH)	-	100	-
9(OVERALL DIMENSIONS)	-	100	-
10.2(High Voltage Test (at Room Temperature))	-	500	10% for each extra core
10.3(Spark Test)	-	0	-
10.4(Flammability Test)	-	200	-
10.5(Oxygen Index Test)	-	3500	-
10.6(Test for Halogen Acid Gas Evolution)	-	3500	-
10.7(Test for Temperature Index)	-	3500	-
10.8(Smoke Density Rating)	-	3500	-
10.11(Persulphate Test)	-	500	-
11(IDENTIFICATION)	-	100	-
12(CORE IDENTIFICATION)	-	100	-
13(CABLE CODE)	-	100	-
15(PACKING AND MARKING)	-	50	-
16.1(Construction)	-	100	-
16.2(Tests)	-	0	-
17(SINGLE CORE NON-SHEATHED CABLES WITH FLEXIBLE CONDUCTOR FOR GENERAL PURPOSE (MAXIMUM CONDUCTOR TEMPERATURE 70°C OR 85°C))	-	100	-
18(SINGLE AND MULTICORE CIRCULAR PVC INSULATED AND SHEATHED CABLES WITH RIGID CONDUCTOR (CLASS 1 AND CLASS 2) FOR GENERAL PURPOSE ) FOR MAXIMUM CONDUCTOR TEMPERATURE (70°C OR 85°C))	-	100	-
19(SINGLE AND MULTICORE CIRCULAR PVC INSULATED AND SHEATHED CABLES/CORDS WITH FLEXIBLE CONDUCTOR (CLASS 5) FOR GENERAL PURPOSE (MAXIMUM CONDUCTOR TEMPERATURE 70°C OR 85°C))	-	100	-
20(MULTICORE CIRCULAR PVC INSULATED AND SHEATHED CABLES WITH FLEXIBLE CONDUCTOR (CLASS 5) FOR GENERAL PURPOSE (FOR MAXIMUM CONDUCTOR TEMPERATURE 70°C OR 85°C))	-	100	-
21(ARALLEL TWIN AND TWISTED TWIN FLEXIBLE PVC INSULATED UNSHEATHED CORDS (CLASS 5) FOR GENERAL PURPOSE (FOR MAXIMUM CONDUCTOR TEMPERATURE 70°C OR 85°C))	-	100	-
22(TWO AND THREE CORE FLAT CABLES WITH PVC INSULATION AND SHEATHED (CLASS 2 OR 5) FOR GENERAL PURPOSE( FOR MAXIMUM CONDUCTOR TEMPERA TURE 70°C OR 85°C))	-	100	-
(4.3 of IS 8130:2013)(Form of Conductor)	-	100	-
( 4.4.1 of IS 8130:2013)(Joints in Conductor)	-	100	-
(4.4.2 of IS 8130:2013)(Joints in Conductor Solid Conductors (Aluminium Conductors only))	-	100	-
(Cl.6.1.1 of IS 8130:2013)(Solid Conductor (Class 1))	-	100	-
(Cl.6.1.2 of IS 8130:2013)(Solid Conductor (Class 1))	-	100	-
(Cl.6.1.3 of IS 8130:2013)(Solid Conductor (Class 1))	-	100	-
(6.2.1 of IS 8130:2013)(Stranded Circular Non-compacted Conductors (Class 2))	-	100	-
(6.2.2 of IS 8130:2013)(Stranded Circular Non-compacted Conductors (Class 2))	-	100	-
(6.2.3 of IS 8130:2013)(Stranded Circular Non-compacted Conductors (Class 2))	-	100	-
(6.3.1 of IS 8130:2013)(Stranded Compacted Circular Conductors and Shaped Conductors (Class 2))	-	100	-
(6.3.2 of IS 8130:2013)(Stranded Compacted Circular Conductors and Shaped Conductors (Class 2))	-	100	-
(6.3.3 of IS 8130:2013)(Stranded Compacted Circular Conductors and Shaped Conductors (Class 2))	-	100	-
( 6.4.1 of IS 8130:2013)(Flexible Conductors (Class 5))	-	100	-
(6.4.2 of IS 8130:2013)(Flexible Conductors (Class 5))	-	100	-
( 6.4.3 of IS 8130:2013)(Flexible Conductors (Class 5))	-	100	-
Cl.19.1.4(Assembly of Cores)	-	100	-
10.1(HV (water immersion))	-	1500	10% for each extra core
10.9(Additional ageing test (OU cables only) -HV test (at 60±3oC))	-	2000	-

08 Apr, 2027

-
-

National Test House (NTH), Alipore, Kolkata-700027

5123904

IS 7098 : Part 1 (1988)

Specification for crosslinked polyethylene insulated pvc sheathed cables: Part 1 for working voltages up to and including 1100 volts (First Revision)

20000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(CONDUCTOR: MATERIALS)	-	0	-
4(INSULATION : MATERIALS)	-	0	-
5.1(FILLER AND INNER SHEATH)	-	0	-
5.2(FILLER AND INNER SHEATH)	-	0	-
6(ARMOURING)	-	0	-
7(OUTER SHEATH)	-	0	-
8.1(CONDUCTOR: CONSTRUCTION)	-	0	-
8.2(PROTECTIVE BARRIER)	-	0	-
8.3(SIZE OF NEUTRAL CONDUCTOR)	-	0	-
9.1(Insulation Applied by extrusicn)	-	0	-
9.2(Thickness of Insulation - Average)	-	1000	10% extra for each core
9.3(Thickness of Insulation - Minimum)	-	500	10% extra for each core
9.4(Application of Insulation)	-	0	-
10.1(Core Identification)	-	0	-
10.2(Core Identification- Neutral)	-	0	-
10.3(Core Identification by number )	-	0	-
10.4(Core Identification by number - Neutral )	-	0	-
11(LAVING UP OF CORES)	-	0	-
12.1 & 12.2(Inner sheath : Application)	-	0	-
12.3(Thickness of Inner Sheath)	-	1000	-
13.1(Armouring: Application)	-	0	-
13.1.2(Armouring: Coverage )	-	0	-
13.1.3(Armouring: Direction of Lay )	-	0	-
13.4(Armour: Joint)	-	0	-
13.5(Armouring : Resistance Test)	-	2000	-
13.6 a)(ARMOURING: Tensile Strength)	-	1000	-
13.6 b)(ARMOURING: Elongation )	-	1000	-
13.6 c)(ARMOURING: Torsion Test (For round wire ) )	-	1000	-
13.6 d)(ARMOURING: Winding Test(For formed wire))	-	1000	-
13.6 e)(ARMOURING: Uniformity of zinc coating)	-	1000	-
13.6 f)(ARMOURING: Mass of zinc coating )	-	2000	-
13.6 g)(ARMOURING: Resistivity)	-	2000	-
14.1(Outer Sheath : Application)	-	0	-
14.2(Colour of outer sheath)	-	0	-
14.3(Thickness of outer sheath - AVERAGE)	-	1000	-
14.3(Thickness of outer sheath - minimum)	-	500	-
15.1 a) i)(Annealing Test ( For copper wire ) )	-	1000	-
15.1 a) ii)(Tensile test (for aluminium) - Before stranding )	-	1000	-
15.1 a) ii)(Tensile test (for aluminium) - After stranding )	-	1000	-
15.1 a) iii)(Wrapping test (for aluminium))	-	500	-
15.1 a) iv)(Resistance test - Main conductor)	-	2000	-
15.1 a) iv)(Resistance test - Neutral conductor)	-	0	-
15.1 d) i) (Phyaical tests for insulation : Tensile Test)	-	750	-
15.1 d) i) (Phyaical tests for insulation : Elongation)	-	750	-
15.1 d) ii) (Phyaical tests for insulation - Ageing in air Oven : Tensile Variation )	-	1000	-
15.1 d) ii) (Phyaical tests for insulation- Ageing in air oven : Elongation Variation )	-	1000	-
15.1 d) iii) (Phyaical tests for insulation : Hot set )	-	500	-
15.1 d) iii) (Phyaical tests for insulation : Permanent set )	-	500	-
15.1 d) iv) (Phyaical tests for insulation : Shrinkage )	-	1000	-
15.1 d) iv) (Phyaical tests for insulation : Shrinkage - Crack observed )	-	0	-
15.1 d) v) (Insulation: Waterabsorption(gravimetric))	-	1000	-
15.1 e) i) (Physical tests for outer sheath : Tensile stregth)	-	500	-
15.1 e) i) (Physical tests for outer sheath : Elongation)	-	500	-
15.1 e) ii) (Physical tests for outer sheath- Ageing in air oven : Tensile stregth )	-	500	-
15.1 e) ii) (Physical tests for outer sheath -Ageing in air oven : Elongation )	-	500	-
15.1 e) ii) (Physical tests for outer sheath- Ageing in air oven : Tensile stregth Variation )	-	500	-
15.1 e) ii) (Physical tests for outer sheath -Ageing in air oven : Elongation Variation )	-	500	-
15.1 e) iii) (Sheath: Loss of mass in air oven)	-	1000	-
15.1 e) iv) (Phyaical tests for Sheath : Shrinkage )	-	500	-
15.1 e) iv) (Phyaical tests for Sheath : Shrinkage - Crack observed )	-	0	-
15.1 e) v) (Sheath : Hot deformation)	-	500	-
15.1 e) vi) (Sheath : Heat shock test)	-	500	-
15.1 e) vii) (Sheath : Thermalstability)	-	1000	-
15.1 f)(INSULATION RESISTANCE TEST : Volume resistivity )	-	2000	10% extra for each core
16.2(HIGH VOLTAGE TEST )	-	2000	10% extra for each core
16.3(FLAMMABILITY TEST : Period of Burning )	-	250	-
16.3(FLAMMABILITY TEST : Unaffected length )	-	250	-
16.9(Oxygen Index Test)	-	5000	-
16.1(Flame Retardance Test on Single Cables)	-	5000	-
16.11(Flame Retardance Test on Bunched Cables)	-	5000	-
16.13(Test for Halogen Acid Gas Evolution)	-	5000	-
16.14(Temperature Index)	-	5000	-
17.1(Manufacturer'. identification)	-	0	-
17.2(cable Indentification )	-	0	-
17.3(cable Code )	-	0	-
15.4 (a)(Cold bend)	-	500	-
15.4 (b)(Cold impact)	-	500	-
Table 1(Ageing in air oven - Elongation on Insulation)	-	500	-
Table 1(Ageing in air oven - Tensile strength on Insulation)	-	500	-
Table 1(Ageing in air oven - Elongation on Insulation)	-	500	-
Table 1(Ageing in air oven - Tensile strength on Insulation)	-	500	-
Table 4(Copper purity test)	-	500	-
Cl No. 16.15(Smoke density test)	-	5000	-
Table 2(Cold Impact test for Outer sheath)	-	500	-
Table 2(Cold bend test for Outer sheath)	-	500	-
Cl 16(Halogen Acid Gas Test)	-	5000	-
Cl 16(Halogen Acid Gas Test)	-	5000	-
Cl 16(Halogen Acid Gas Test)	-	5000	-
Cl.8(Conductor)	-	0	-
Cl.8(Conductor)	-	0	-
Cl.8(Conductor)	-	0	-
Cl.15.4(Cold Bend Test (for outer sheath))	-	500	-
Cl.15.4(Cold Impact Test (For outer sheath))	-	500	-
Cl.13.5.1 and Table 7(Resistance Test for Armouring (other than mining Cables))	-	2000	-
13.2(Type of armour )	-	0	-
13.3(Armouring : Dimensions -Wire Diameter)	-	500	-
13.3(Armouring : Dimensions -Formed wire )	-	500	-

08 Apr, 2027

-
-

National Test House (NTH), Alipore, Kolkata-700027

5123904

IS 428 (2013)

Washable distemper - Specification (Third Revision)

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 6.9.2.1(Volatile organic compounds (Requirement for Eco-Mark))	-	1500	Without GST
Cl.6.6, Cl.6.7 and 9.1 - Table 1 - Sl. No. ix)(Accelerated storage stability)	-	1200	Without GST
Cl.6.6, Cl.6.7 and 9.1 - Table 1 - Sl. No. viii)(Resistance to alkali)	-	1200	Without GST
Cl.6.6, Cl.6.7 and 9.1 - Table 1 - Sl. No. vii)(Recoating Properties)	-	1200	Without GST
Cl.6.6, Cl.6.7 and 9.1 - Table 1 - Sl. No. vi)(Residue on sieve, Type 2)	-	1200	Without GST
Cl.6.6, Cl.6.7 and 9.1 - Table 1 - Sl. No. vi)(Residue on sieve, Type 1)	-	1200	Without GST
Cl.6.6, Cl.6.7 and 9.1 - Table 1 - Sl. No. v)(Fastness to light)	-	8000	Without GST
Cl.6.6, Cl.6.7 and 9.1 - Table 1 - Sl. No. iv)(Colour)	-	1200	Without GST
Cl.6.6, Cl.6.7 and 9.1 - Table 1 - Sl. No. iii)(Finish)	-	1200	Without GST
Cl.6.6, Cl.6.7 and 9.1 - Table 1 - Sl. No. ii)(Consistency )	-	1200	Without GST
Cl.6.6, Cl.6.7 and 9.1 - Table 1 - Sl. No. i) b)(Drying Time a) Hard Dry, Type 2)	-	1200	Without GST
Cl.6.6, Cl.6.7 and 9.1 - Table 1 - Sl. No. i) b)(Drying Time a) Hard Dry, Type 1)	-	1200	Without GST
Cl.6.6, Cl.6.7 and 9.1 - Table 1 - Sl. No. i) a)(Drying Time a) Surface Dry, Type 2)	-	1200	Without GST
Cl.6.6(Keeping Proterties)	-	12500	As keeping properties includes all tests in Table-1 of IS 428:2013 including 2580hrs of Fastness to light test Without GST
Cl.6.5(Lead Restriction)	-	1200	Without GST
Cl.6.3(Application)	-	1200	Without GST
Cl.6.2(Thining)	-	1200	Without GST
Cl.6.1(Foam and condition)	-	1200	Without GST

08 Apr, 2027

-
-

National Test House (NTH), Alipore, Kolkata-700027

5123904

IS 5410 (2013)

Cement paint - Specification (Second Revision)

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.4.7(Keeping Properties)	-	12500	As keeping properties includes all tests in Table-1 of IS 5410:2013 Without GST
Cl.4.8, 7.1 - Table 1 ix)(Recoating Properties)	-	1200	Without GST
Cl.4.8, 7.1 - Table 1 viii)(Pot life of mixed paint)	-	1200	Without GST
Cl.4.8, 7.1 - Table 1 vii)(Water Repellency)	-	1200	Without GST
Cl.4.8, 7.1 - Table 1 vi)(Resistance to dry rubbing)	-	1200	Without GST
Cl.4.8, 7.1 - Table 1 iv)(Fastness to light)	-	8000	Without GST
Cl.4.8, 7.1 - Table 1 iii)(Colour)	-	1200	Without GST
Cl.4.8, 7.1 - Table 1 ii)(Finish)	-	1200	Without GST
Cl.4.8, 7.1 - Table 1 i)(Drying Time, Hard Dry)	-	1200	Without GST
Cl.4.6(Durability)	-	1200	Without GST
Cl.4.4(Lead Restriction)	-	1200	Without GST
Cl.4.2(Preparation for Use)	-	1200	Without GST
Cl.4.1.1(Freedom from Organic Binders)	-	1200	Without GST
Cl.4.1(Composition - Hydrated Lime)	-	3000	Without GST
Cl.4.1(Composition - Portland Cement)	-	3000	Without GST

08 Apr, 2027

-
-

National Test House (NTH), Alipore, Kolkata-700027

5123904

IS 427 (2013)

Distemper, dry, colour as required - Specification (Third Revision)

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Form and Condition)	-	250	-
4.2.1(Composition)	-	250	-
4.3.1(Lead restriction)	-	1000	-
4.2.2 & 7, Table-1(i)(Drying time)	-	250	-
4.2.2 & 7, Table-1(ii)(Consistency)	-	250	-
4.2.2 & 7, Table-1(iii)(Finish)	-	250	-
4.2.2 & 7, Table-1(iv)(Colour)	-	250	-
4.2.2 & 7, Table-1(v)(Fastness to light)	-	8000	250 hrs exposure by Xenon Arc apparatus
4.2.2 & 7, Table-1(vi)(Residue on seive)	-	250	-
4.2.2 & 7, Table-1(vii)(Recoating properties)	-	250	-
4.2.2 & 7, Table-1(viii)(Resistance to alkali)	-	500	-
4.2.2 & 7, Table-1(ix)(Resistance to dry rubbing)	-	500	-

08 Apr, 2027

-
-

National Test House (NTH), Alipore, Kolkata-700027

5123904

IS 1554 : Part 1 (1988)

Specification for pvc insulated (Heavy Duty) electric cables: Part 1 for working voltages up to and including 1100 v (Third Revision)

20000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(MATERIALS : CONDUCTOR)	-	0	-
4.1.1(INSULATION : General Purjose Insulaiion)	-	0	-
4.1.2(INSULATION : Heat Resisting Insulation)	-	0	-
5.1(MATERIALS : FILLER AND INNER SHEATH)	-	0	-
6.1(MATERIALS : ARMGURING)	-	0	-
6.2(MATERIALS : ARMGURING)	-	0	-
7.1.1(OUTER SHEATH : For Cables with General Purpose InsuIafion)	-	0	-
7.1.2(OUTER SHEATH : For Cables with Heat Resisting InsuIalion)	-	0	-
8.1(CONSTRUCTION : CONDUCTOR)	-	0	-
8.2(CONSTRUCTION : CONDUCTOR)	-	0	-
9.1(INSULATION )	-	0	-
9.2(INSULATION : Thickness of Insulation)	-	500	10 % extra for each core
9.3(INSULATION :Tolerance on Thickness of Insulation)	-	1000	10 % extra for each core
9.4(INSULATION : Application of Insulation)	-	0	-
10.1(CORE IDENTIFICATION)	-	0	-
10.2(CORE IDENTIFICATION)	-	0	-
10.3(CORE IDENTIFICATION)	-	0	-
10.3.1(Arrangement of Marking)	-	0	-
11.1(LAYING UP OF CORES)	-	0	-
11.2(LAYING UP OF CORES)	-	0	-
12.1(INNER SHEATH)	-	0	-
12.2(INNER SHEATH)	-	0	-
12.3.1(INNER SHEATH :Thickness of Inner Sheath)	-	500	-
13.1.1(ARMOURING : Application)	-	0	-
13.1.2(Armouring: Coverage )	-	0	-
13.1.3(ARMOURING : Direction of lay )	-	0	-
13.1.4(ARMOURING : Application)	-	0	-
13.2(ARMOURING : Type of Armour)	-	0	-
13.2.1(ARMOURING : Type of Armour)	-	0	-
13.3(Armouring : Dimensions -Wire Diameter)	-	500	-
13.3(Armouring : Dimensions -Formed wire )	-	500	-
13.4(ARMOURING : Joints)	-	0	-
13.5.1(ARMOURING : Resistance)	-	2000	-
13.5.2(ARMOURING : Resistance)	-	2000	-
13.6 a)(ARMOURING: Tensile Strength)	-	1000	-
13.6 b)(ARMOURING: Elongation )	-	1000	-
13.6 c)(ARMOURING: Torsion Test (For round wire ) )	-	1000	-
13.6 d)(ARMOURING: Winding Test(For formed wire))	-	1000	-
13.6 e)(ARMOURING: Uniformity of zinc coating)	-	1000	-
13.6 f)(ARMOURING: Mass of zinc coating )	-	2000	-
13.6 g)(ARMOURING: Resistivity)	-	2000	-
14.1(OUTER SHEATH)	-	0	-
14.2(OUTER SHEATH)	-	0	-
14.3(OUTER SHEATH : Colour )	-	0	-
14.4.1(Thickness of Outer Sheath : Unarmowed Cables)	-	500	-
14.4.2(Thickness of Outer Sheath : Armoured Cables)	-	500	-
15.1 a) 1)(Tests on conductor : Annealing test ( for copper ))	-	1000	-
15.1 a) 2)(Tensile test (for aluminium) - Before stranding )	-	500	-
15.1 a) 2)(Tensile test (for aluminium) - After stranding )	-	500	-
15.1 a) 3)(Tests on conductor : Wrapping test ( for aluminium ))	-	500	-
15.1 a) 4)(Tests on conductor : Conductor resistance test)	-	2000	10 % extra for each core
15.1 a) 4)(Resistance test - Neutral conductor )	-	2000	-
15.1 d)1)(Phyaical tests for insulation : Tensile Test)	-	500	10 % extra for each core
15.1 d)1)(Phyaical tests for insulation : Elongation )	-	500	10 % extra for each core
15.1 d)1)(Physical tests for sheath : Tensile stregth )	-	500	-
15.1 d)1)(Physical tests for sheath : Elongation )	-	500	-
15.1 d)2)(Phyaical tests for insulation- Ageing in air Oven : Tensile Test)	-	500	10 % extra for each core
15.1 d)2)(Phyaical tests for insulation - Ageing in air oven : Elongation )	-	500	10 % extra for each core
15.1 d)2)(Phyaical tests for insulation - Ageing in air Oven : Tensile Variation )	-	500	10 % extra for each core
15.1 d)2)(Phyaical tests for insulation- Ageing in air oven : Elongation Variation )	-	500	10 % extra for each core
15.1 d)2)(Physical tests for outer sheath- Ageing in air oven : Tensile stregth )	-	500	-
15.1 d)2)(Physical tests for outer sheath -Ageing in air oven : Elongation )	-	500	-
15.1 d)2)(Physical tests for outer sheath- Ageing in air oven : Tensile stregth Variation )	-	500	-
15.1 d)2)(Physical tests for outer sheath -Ageing in air oven : Elongation Variation )	-	500	-
15.1 d)3)(Phyaical tests for insulation : Shrinkage )	-	500	10 % extra for each core
15.1 d)3)(Phyaical tests for insulation : Shrinkage - Crack observed )	-	500	10 % extra for each core
15.1 d)3)(Phyaical tests for Sheath : Shrinkage )	-	500	10 % extra for each core
15.1 d)3)(Phyaical tests for Sheath : Shrinkage - Crack observed )	-	500	10 % extra for each core
15.1 d)4)(Hot deformation : Insulation )	-	500	10 % extra for each core
15.1 d)4)(Hot deformation : Sheath )	-	500	10 % extra for each core
15.1 d)5)( Loss of mass in air oven- Insulation )	-	1500	10 % extra for each core
15.1 d)5)( Loss of mass in air oven- sheath )	-	1500	-
15.1 d)6)(Heat shock test- Insulation )	-	500	10 % extra for each core
15.1 d)6)(Heat shock test- sheath )	-	500	-
15.1 d)7)(Thermal stability- insulation )	-	1000	10 % extra for each core
15.1 d)7)(Thermal stability- Sheath )	-	1000	-
15.1 e)(Insulation resistance test : Volume Resistivity )	-	1000	10 % extra for each core
15.1 e)(Insulation resistance test : IR Constant )	-	500	10 % extra for each core
15.1 f)(High voltage test ( water immersion test ))	-	3000	10 % extra for each core
15.1 g)(High voltage test at room temperature)	-	1000	10 % extra for each core
15.1 g)(High voltage test at room temperature)	-	1000	10 % extra for each core
15.4 a)(Cold bend test- Insulation ( Optional test))	-	0	-
15.4 a)(Cold bend test- Sheath ( Optional test))	-	0	-
15.4 b)(Cold impact test- Insulation ( Optional test))	-	0	-
15.4 b)(Cold impact test- Sheath ( Optional test))	-	0	-
15.4 c)(Armour resistance test ( for other than mining cables ).- Optional test )	-	0	-
16.1(DETAILS OF TESTS : General)	-	0	-
16.2(DETAILS OF TESTS : High Voltage Test at Room Temperature)	-	1000	10 % extra for each core
16.3.1(High Voltage Test ( Water Immersion Test ) : a.c. Test)	-	1500	10 % extra for each core
16.3.2(High Voltage Test ( Water Immersion Test ) : d.c. Test)	-	1500	10 % extra for each core
16.4(Flammability Test)	-	500	-
16.5(Oxygen Index Test)	-	4000	-
16.6(Flame Retardance Test on Single Cables)	-	5000	-
16.7(Flame Retardance Test on Bunched Cables)	-	5000	-
16.9(Test for Halogen Acid Gas Evolution)	-	5000	-
16.1(Temperature Index)	-	1000	-
17.1(IDENTIFICATION : Manufacturer’s Identification)	-	0	-
17.2(IDENTIFICATION : Cable Identification)	-	0	-
17.2.1(IDENTIFICATION : Cable Identification)	-	0	-
17.3(IDENTIFICATION : Cable Code)	-	0	-
15.1.e(Insulation resistance Test- Insulation resistance At Maximum rated temperature temperature)	-	1000	10 % extra for each core
15.1.e(Insulation resistance Test- Insulation resistance constant At Room temperature)	-	500	10 % extra for each core
15.1.e(Insulation resistance Test- Volume Resistivity At Maximum rated temperature temperature)	-	1500	10 % extra for each core
15.1.e(Insulation resistance Test- Volume Resistivity At Room temperature)	-	1500	10 % extra for each core
16.4(Flammability Test- Un affected portion)	-	500	-
16.4(Flammability Test- Period of Burning)	-	500	-
9.3(Minimum Thickness of Reduce core insulation)	-	500	-
9.2(Thickness of Reduce core insulation)	-	500	-
3.1 Table 2 IS 8130(Number of wires in the conductor)	-	0	-
Cl No. 16.10(Smoke density test)	-	5000	-
Cl No. 16.8(Test for specific optical density of smoke)	-	0	-
Table 4(Copper purity test)	-	0	-
Cl.8(Conductor, Number of wires.)	-	0	-
Cl.8(Conductor, Number of wires.)	-	0	-
Cl.8(Flexibility class)	-	0	-
[(Cl.15), (d), 2](After ageing, Elongation of Sheath [Percentage])	-	1000	10 % extra for each core
5.2(MATERIALS : FILLER AND INNER SHEATH)	-	0	-
12.3(INNER SHEATH :Thickness of Inner Sheath)	-	500	-

08 Apr, 2027

-
-

National Test House (NTH), Alipore, Kolkata-700027

5123904

IS 133 (2013)

ENAMEL, INTERIOR : (A) UNDERCOATING (B) FINISHING

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1()	-	0	-
5.4(IS 101 (Part 1/Sec 2))	-	1000	-
5.5()	-	1000	-
5.6()	-	1000	-
5.7(IS 133Annex B.)	-	1000	-
5.8(IS 101 (Part 8/Sec 5).)	-	1000	-
Table 1 Cl No 5.9,i(IS 101 part 3 sec 1)	-	1000	-
Table 1 5.9,ii(IS 101 Part l/Sec 7)	-	1000	-
Table 1 Cl No 5.9,i(IS 101 part 3 sec 2)	-	1000	-
Table 1 Cl No 5.9,i(IS 101 part 3 sec 3)	-	1000	-
Table 1 5.9,iii(Part 1/Sec 5)	-	1000	-
Table 1 5.9, iv((Part 3/Sec 4))	-	1000	-
Table 1 5.9, iv(Part 4/Sec 4)	-	1000	-
Table 1 5.9,v(Part 3/Sec 5)	-	1000	-
Table 1 5.9,vi(Qualitative IS 5)	-	1000	-
Table 1 5.9,vii(Part 4/Sec 1)	-	1000	-
Table 1 Cl No 5.9 Vii(Part 4/Sec 3)	-	5000	-
Table 1 5.9,ix(IS 133Annex E.)	-	1000	-
Table 1 5.9,x(3 of (Part 5/Sec 2))	-	1000	-
Table 1 5.9,x(2 of (Part 5/Sec 2))	-	1000	-
Table 1 5.9,xi((Part 1/Sec 6))	-	1000	-
Table 1 5.9,xii((Part 8/Sec 6)	-	1000	-
Table 1 5.9,xiii(IS 133Annex F.)	-	1000	-
Table 1 5.9,xiv(Part 6/Sec 2)	-	1000	-

08 Apr, 2027

-
-

100

National Test House (NTH), Alipore, Kolkata-700027

5123904

IS 13369 (1992)

Stationary lead - Acid batteries (With Tubular Positive Plates) in monobloc container - Specification

101000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 11.2(IS 13369-1992, Amndt. 1 to 3)	-	500	---
Cl. 11.4(IS 13369-1992, Amndt. 1 to 3)	-	500	---
Cl. 11.5(IS 13369-1992, Amndt. 1 to 3)	-	20000	---
Cl. 11.8(IS 13369-1992, Amndt. 1 to 3)	-	10000	---
Cl. 11.6(IS 13369-1992, Amndt. 1 to 3)	-	10000	---
Cl. 11.7(IS 13369-1992, Amndt. 1 to 3)	-	40000	---
Cl. 11.9(IS 13369-1992, Amndt. 1 to 3)	-	10000	---
Cl. 11.10(IS 13369-1992, Amndt. 1 to 3)	-	10000	---

08 Apr, 2027

-
-

101

National Test House (NTH), Alipore, Kolkata-700027

5123904

IS 1651 (2013)

Stationary cells and batteries, lead - Acid type (With Tubular Positive Plates) - Specification (Fourth Revision)

121500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 12.2(IS 1651-2013)	-	500	---
Cl. 12.3(IS 1651-2013)	-	500	---
Cl. 12.4(IS 1651-2013)	-	500	---
Cl. 12.5(IS 1651-2013)	-	25000	---
Cl. 12.10(IS 1651-2013)	-	5000	---
Cl. 12.9(IS 1651-2013)	-	10000	---
Cl. 12.7(IS 1651-2013)	-	5000	---
Cl. 12.8(IS 1651-2013)	-	45000	---
Cl. 12.11(IS 1651-2013)	-	5000	---
Cl. 12.12(IS 1651-2013)	-	10000	---
Cl. 12.13(IS 1651-2013)	-	15000	---

08 Apr, 2027

-
-

102

National Test House (NTH), Alipore, Kolkata-700027

5123904

IS 16270 (2014)

Secondary cells and batteries for solar photovoltaic application - General requirements and methods of test

220000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.1(Capacity test)	-	20000	----
8.2(Endurance test)	-	80000	----
8.3(Charge retention test)	-	10000	---
8.4(Cycle endurance in Photovoltaic application)	-	90000	----
8.5(Sulphation Test)	-	10000	-----
8.6(Water loss test)	-	10000	-----

08 Apr, 2027

-
-

103

National Test House (NTH), Alipore, Kolkata-700027

5123904

IS 7372 (1995)

Lead - Acid storage batteries for motor vehicles - Specification (First Revision)

191500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 9.3 of IS 7372:1995(Physical Examination)	-	500	---
Cl 9.4 of IS 7372:1995(Dimensions and Layout)	-	500	----
Cl 9.5 of IS 7372:1995(Marking)	-	500	-----
Cl 9.6 of IS 7372:1995(Air Pressure Test)	-	10000	----
Cl 9.7 of IS 7372:1995(9.7 Capacity Test)	-	25000	----
Cl 9.8 of IS 7372:1995(Vibration Test)	-	10000	----
Cl 9.9 of IS 7372:1995(High-Rate Discharge Test at Normal Temperature)	-	15000	-----
Cl 9.10 of IS 7372:1995(High-Rate Discharge Test at Low Temperature)	-	20000	----
Cl 9.12 of IS 7372:1995(Retention of Charge Test)	-	15000	-----
Cl 9.13 of IS 7372:1995(Resistance to Overcharge Test)	-	10000	-----
Cl 9.14 of IS 7372:1995(Life Test)	-	60000	-----
Cl 9.15 of IS 7372:1995(Storage Test)	-	25000	----

08 Apr, 2027

-
-

104

National Test House (NTH), Alipore, Kolkata-700027

5123904

IS 2932 (2013)

Enamel, synthetic, exterior: (a) Undercoating (b) Finishing - Specification (Fourth Revision)

22000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.3(Freedom from Coarse Particles)	-	1200	Without GST
6.4(Skin Formation)	-	1200	Without GST
6.5(Thinning Properties)	-	1200	Without GST
6.6(Application Properties)	-	1200	Without GST
6.8(Lead Restriction)	-	1200	Without GST
6.9 Table 2 (1) a. Consistency ( Undercoating and Finishing ) )	-	1200	Without GST
6.9 Table 2 (1) b. Viscosity by ford 80-120 s )	-	1200	Without GST
6.9 Table 2 ( 2) Mass, ( Under coating ) )	-	1200	Without GST
6.9 Table 2 ( 2) Mass, (Finishing ) )	-	1200	Without GST
6.9 Table 2 (3) Drying time, a) Surface dry, ( Under coating ) )	-	1200	Without GST
6.9 Table 2 (3) Drying time, a) Surface dry, ( Finishing ) )	-	1200	Without GST
6.9 Table 2 (b) Hard dry ( Under coating ) )	-	1200	Without GST
6.9 Table 2 (b) Hard dry, (Finishing ) )	-	1200	Without GST
6.9 Table 2 (c) Tack free ( Under coating (Finishing ) )	-	1200	Without GST
6.9 Table 2 (4) a) Finish (Under coating ) )	-	1200	Without GST
6.9 Table 2 (4) a) Finish (Finishing) )	-	1200	Without GST
6.9 Table 2 (b) ) Gloss 60º (Under coating ) )	-	1200	Without GST
6.9 Table 2 (b) ) Gloss 60º (Finishing) )	-	1200	Without GST
6.9 Table 2 (5) Fineness of grind,(Under coating ))	-	1200	Without GST
6.9 Table 2 (5) Fineness of grind,(Finishing))	-	1200	Without GST
6.9 Table 2 (6) Colour , (Finishing))	-	1200	Without GST
6.9 Table 2 (7) Flexibility and adhesion: a) Scratch hardness No such scratch as to show the bare metal after Clause 3 of — (Load 1 000 g) ( Under coating & Finishing ) )	-	1200	Without GST
6.9 Table 2 (b) Bend test (with 6.25 mm 48 h of air in type 1 apparatus) ( Under coating & Finishing ) )	-	1200	Without GST
6.9 Table 2 (8) Flash point ( Under coating & Finishing ) )	-	1200	Without GST
6.9 Table 2 (9) Composition: a) Volume solids ( Under coating ))	-	3000	Without GST
6.9 Table 2 (9) Composition: a) Volume solids ( Finishing))	-	3000	Without GST
6.9 Table 2 (9) Composition:b) Phthalic anhydride content of non-volatile vehicle ( Under coating & Finishing ))	-	3000	Without GST
6.9 Table 2 (10) Resistance to acid ( Under coating & Finishing ))	-	1200	Without GST
6.9 Table 2 (11) Resistance to alkali ( Under coating & Finishing ))	-	1200	Without GST
6.9 Table 2 (12) Accelerated storage stability test ( Under coating & Finishing ))	-	1200	Without GST
6.9 Table 2 (13) Keeping properties ( Under coating & Finishing ))	-	2000	Without GST
6.9 Table 2 (14) Wet opacity ( Under coating & Finishing ))	-	1200	Without GST
6.7.1.3(QUV apparatus)	-	10000	Without GST

08 Apr, 2027

-
-

105

National Test House (NTH), Alipore, Kolkata-700027

5123904

IS 2074 (2015)

Ready mixed paint, air drying, red oxide - Zinc chrome, priming - Specification (Third Revision)

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 5.1 (a)(Composition, Pigment, Cl 5.1.1)	-	1500	Without GST
Cl 5.1 (b)(Composition, Driers)	-	1500	Without GST
Cl 5.1 .1 (a)(Zinc chrome, (Type 2 of IS 51), Annex B)	-	1500	Without GST
Cl 5.1 .1 (b)(Synthetic red oxides of iron (conforming to Grade 2 or IS 44), (conforming to Grade 3 of IS 44), 6 of IS 6947 (Part 2))	-	1500	Without GST
Cl 5.1 .1 (c)(Suitable extenders)	-	2999.98	Without GST
Cl 5.1.2(Volatile vehicle)	-	1200	Without GST
Cl 5.2(Material)	-	1200	Without GST
Cl 5.3(Compatibility with Thinner, IS 1872)	-	1200	Without GST
Cl 5.4(Freedom from Objectionable Impurities)	-	1200	Without GST
Cl 5.5(Lead Restriction, IS 101(Part 8/Sec 5))	-	1200	Without GST
1 (i) (a) Table 1(Consistency, Annex C)	-	1200	Without GST
1 (i) (b) Table 1(Viscosity by ford cup No. 4, IS 101 (Part1/sec5))	-	1200	Without GST
1 (ii) Table 1(Mass, IS 101 (Part1/sec7))	-	1200	Without GST
1 (iii) (a) Table 1(Drying time, Surface Dry, IS 101 (Part3/sec1))	-	1200	Without GST
1 (iii) (b) Table 1(Drying time, Hard Dry, IS 101 (Part3/sec1))	-	1200	Without GST
1 (iv) (a) Table 1(Finish, IS 101 (Part3/sec4))	-	1200	Without GST
1 (iv) (b) Table 1(Gloss, IS 101 (Part4/sec4))	-	1200	Without GST
1 (v) Table 1(Fineness of grind, IS 101 (Part 3/Sec 5))	-	1200	Without GST
1 (vi) Table 1(Colour, IS 101 (Part 4/Sec 2))	-	1200	Without GST
1 (vii) (a) Table 1(Flexibility and adhesion: Bend test (with 6.25 mm dia mandrel and in type 1 apparatus), Clause 2 of IS 101 (Part 5/Sec 2))	-	1200	Without GST
1 (vii) (b) Table 1(Scratch hardness (load 1 000g), Clause 3 of IS 101 (Part 5/Sec 2))	-	1200	Without GST
1 (viii) Table 1(Flash point, IS 101 (Part l/Sec 6))	-	1200	Without GST
1 (ix) Table 1(Volume solids, IS 101 (Part 8/Sec 6))	-	3000	Without GST
1 (x) (a) Table 1(Resistance to humidity under condition of condensation: Resistance to humidity, Clause 2 of IS 101 (Part 6/Sec 1))	-	5000	Without GST
1 (x) (b) Table 1(Resistance to humidity under condition of condensation: Resistance to sea water (applicable for marine paints only), Annex D)	-	5000	Without GST
1 (x) (c) Table 1(Resistance to humidity under condition of condensation: Resistance to salt spray, Annex E)	-	5000	Without GST
1 (xi) Table 1(Accelerated storage stability test, Annex F)	-	1200	Without GST
1 (xii) Table 1, Cl.5.6(Keeping properties 1. Visual observation [Cl.3.1, table 1 of IS 101 (Part 6/Sec 2)])	-	1200	Without GST

08 Apr, 2027

-
-

106

National Test House (NTH), Alipore, Kolkata-700027

5123904

IS 12744 : Part 1 (2013)

Ready mixed paint, air drying, red oxide - Zinc phosphate, priming - Specification: Part 1 for domestic and decorative applications (First Revision)

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.5.3, 8.1 - Table 1 -xiii)(Keeping Properties)	-	3000	-
Cl.5.3, 8.1 - Table 1 -xii)(Mass)	-	250	-
Cl.5.3, 8.1 - Table 1 -xi)(Flash Point)	-	1000	-
Cl.5.3, 8.1 - Table 1 -x) b)(Resistance to humidity under conditions of condensation a) Resistance to Salt Spray (for 96 Hours))	-	500	-
Cl.5.3, 8.1 - Table 1 -x) a)(Resistance to humidity under conditions of condensation a) Resistance to humidity (for 7 days))	-	500	-
Cl.5.3, 8.1 - Table 1 -ix) b)(Flexibility and adhesion b) Bent Test (with 6.25 mm dia mendrel in type 1 apparatus)	-	500	-
Cl.5.3, 8.1 - Table 1 -ix) a)(Flexibility and adhesion a) Scratch Hardness (Load 800 g))	-	500	-
Cl.5.3, 8.1 - Table 1 -viii)(Red Oxide (as Fe2O3) )	-	1000	-
Cl.5.3, 8.1 - Table 1 -vii)(Zinc Phosphate)	-	1000	-
Cl.5.3, 8.1 - Table 1 -vi)(Pigment Content)	-	1000	-
Cl.5.3, 8.1 - Table 1 -v)(Wet Opacity)	-	250	-
Cl.5.3, 8.1 - Table 1 -iv)(Colour in Natural Daylight)	-	250	-
Cl.5.3, 8.1 - Table 1 -iii)(Finish)	-	250	-
Cl.5.3, 8.1 - Table 1 -ii)(Consistency )	-	250	-
Cl.5.3, 8.1 - Table 1 -i)(Drying time hard dry)	-	250	-
Cl.5.2(Lead Restriction)	-	1000	-

08 Apr, 2027

-
-

107

National Test House (NTH), Alipore, Kolkata-700027

5123904

IS 2339 (2013)

Aluminium paints for general purposes - Specification (First Revision)

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(Composition)	-	2000	leafing property as per IS 289
5.2(Lead Restriction)	-	1000	-
5.3/8.1 (i)(Drying time)	-	500	-
5.3/8.1 (iv)(Mass)	-	500	-
5.3/8.1 (v)(Wet opacity)	-	500	-
5.3/8.1 (vi)(Flexibility and adhesion, bend test)	-	500	-
5.3/8.1 (vii)(Resistance to humidity under condition of condensation)	-	2500	-
5.3/8.1 (viii)(Flash point)	-	1000	-
5.3, 8.1, Table 1(Consistency)	-	500	-
5.3/8.1 (ix)(Keeping properties)	-	3000	-

08 Apr, 2027

-
-

108

National Test House (NTH), Alipore, Kolkata-700027

5123904

IS 15489 (2013)

Paint, plastic emulsion - Specification (First Revision)

35000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1(Composition)	-	250	-
6.2(Conditions in the Container)	-	250	-
6.3(Thinning)	-	250	-
6.4(Application Properties)	-	250	-
6.5(Mass in kg/10 litre)	-	250	-
6.6(Opacity)	-	250	-
6.7(Fastness to Light)	-	10000	-
6.8(Durability Test for Exterior Use Only)	-	15000	-
Table 1, 6.10, 6.11 and 9.1(Consistency)	-	250	-
Table 1, 6.10, 6.11 and 9.2(Drying time,(a) Surface Dry, class A and B)	-	250	-
Table 1, 6.10, 6.11 and 9.3(Drying time,(a) Surface Dry, ass C and D)	-	250	-
Table 1, 6.10, 6.11 and 9.4(Drying time, Hard Dry, class A and B)	-	250	-
Table 1, 6.10, 6.11 and 9.5(Drying time, Hard Dry, ass C and D)	-	250	-
Table 1, 6.10, 6.11 and 9.6(Finish)	-	250	-
Table 1, 6.10, 6.11 and 9.7(Gloss at 60°, class A)	-	200	-
Table 1, 6.10, 6.11 and 9.8(Gloss at 60°, class B)	-	100	-
Table 1, 6.10, 6.11 and 9.9(Gloss at 60°, class C)	-	100	-
Table 1, 6.10, 6.11 and 9.10(Gloss at 60°, class D)	-	100	-
Table 1, 6.10, 6.11 and 9.12(Resistance to alkali)	-	250	-
Table 1, 6.10, 6.11 and 9.13(Washability and eanability)	-	500	-
Table 1, 6.10, 6.11 and 9.14(Accelerated storage stability)	-	250	-
Table 1, 6.10, 6.11 and 9.15(Recoating properties)	-	250	-
Table 1, 6.10, 6.11 and 9.11(Colour)	-	250	-

08 Apr, 2027

-
-

109

National Test House (NTH), Alipore, Kolkata-700027

5123904

IS 158 (2015)

Ready mixed paint, brushing, bituminous, black, acid, alkali and heat resisting - Specification (Fourth Revision)

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Composition)	-	375	-
4.2.1(Lead Restriction)	-	1000	-
Cl 4.3, Table 1, S.no. i)(Drying time, Hard dry)	-	375	-
Cl 4.3, Table 1, S.no. ii)(Consistency)	-	375	-
Cl 4.3, Table 1, S.no. iii)(Finish)	-	375	-
Cl 4.3, Table 1, S.no. iv)(Wet opacity)	-	375	-
Cl 4.3, Table 1, S.no. v)(Colour)	-	375	-
Cl 4.3, Table 1, S.no. vi)( Mass)	-	375	-
Cl 4.3, Table 1, S.no. vii)(Water content)	-	375	-
Cl 4.3, Table 1, S.no.viii)(Flexibility and adhesion)	-	375	-
Cl 4.3, Table 1, S.no. ix)(Stripping test )	-	375	-
Cl 4.3, Table 1, S.no. x)(Protection against corrosion under conditions of condensation)	-	375	-
Cl 4.3, Table 1, S.no.xi)(Volatile matter, perce)	-	375	-
Cl 4.3, Table 1, S.no.xii)(Resistance to acid)	-	375	-
Cl 4.3, Table 1, S.no.xiii)(Resistance to alkali)	-	375	-
Cl 4.3, Table 1, S.no.xiv)(Resistance to Heat)	-	375	-
Cl 4.3, Table 1, S.no.xv)(Flash point ,)	-	375	-
Cl 4.3, Table 1, S.no.xvi) (Keeping properties)(IS 101 Part 6 Sec 2)	-	5000	-

08 Apr, 2027

-
-

110

National Test House (NTH), Alipore, Kolkata-700027

5123904

IS 9862 (2017)

Specification for ready mixed paint, brushing, bituminous, black, acid, alkali, water and chlorine resistlng (First Revision)

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2(Lead restriction)	-	1000	-
4.3, Table-1(i)(Drying time,(a) Hard dry)	-	375	-
4.3, Table-1(ii)(Consistency)	-	375	-
4.3, Table-1(iii)(Finish)	-	375	-
4.3, Table-1(iv)(Wet opacity)	-	375	-
4.3, Table-1(v)(Mass)	-	375	-
4.3, Table-1(vi)(Colour)	-	375	-
4.3, Table-1(vii)(Flaxibility and adhesion ( Bend test of the film by 6.25 mm Mandrel type-1 apparatus)	-	375	-
4.3, Table-1(viii)(Stripping test)	-	375	-
4.3, Table-1(ix)(Flash point)	-	375	-
4.3, Table-1(x)(Volatile matter content)	-	375	-
4.3, Table-1(xi)(Resistance to humidity under conditions of condensation)	-	375	-
4.3, Table-1(xii)(Resistance to water)	-	375	-
4.3, Table-1(xiii)(Resistance to acid)	-	375	-
4.3, Table-1(xv)(Resistance to chlorine)	-	375	-
4.3, Table-1(xvi)(Water content (if water is suspected to be present))	-	375	-
4.3, Table-1(xvii)(Keeping properties)	-	5000	-
4.3, Table-1(xiv)(Resistance to alkali)	-	375	-

08 Apr, 2027

-
-

111

SWASTIK ELECTRONICS TESTING CENTRE (OPC) PVT. LTD., GHAZIABAD

8163826

IS 16046 : Part 2 (2018)

Secondary Cells and Batteries Containing Alkaline or Other Non-Acid Electrolytes ” Safety Requirements for Portable Sealed Secondary Cells and for Batteries Made from Them for Use in Portable Applications Part 2 Lithium Systems ( Second Revision )

57000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Parameter Measurement Tolerances)	-	500	-
5(General Safety Considerations)	-	500	-
5.1(General)	-	500	-
5.2(Insulation and Wiring)	-	1500	-
5.3(Venting)	-	500	-
5.4(Temperature, Voltage and Current Management)	-	500	-
5.5(Terminal Contacts)	-	2500	-
5.6(Assembly of Cells into batteries)	-	2500	-
5.7(Quality Plan)	-	500	-
5.8(Battery Safety Components)	-	2500	-
6(Type Test and Sample Size)	-	2500	-
7(Specific requirements and tests)	-	500	-
7.1(Charging procedure for test purposes)	-	2500	-
7.2(Intended Use)	-	2500	-
7.3(Reasonably foreseeable misuse)	-	2500	-
8(Information for safety)	-	2500	-
8.1(General)	-	2500	-
8.2(Small Cell and battery safety information)	-	2500	-
9(Marking)	-	2500	-
9.1(Cell Marking)	-	2500	-
9.2(Battery Marking)	-	2500	-
9.3(Caution for ingestion of small cells and batteries)	-	2500	-
9.4(Other information)	-	2500	-
10(Packaging)	-	2500	-
clause 7.3.1 of IS 16047: Part 3(Discharge performance at 20 °C (rated capacity))	-	12000	-

15 May, 2028

-
-

112

Standard Testing and Compliance Private Limited

6178726

IS 16046 : Part 2 (2018)

95000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.7(Quality Plan)	-	0	15% discount to BIS
5(General Safety Considerations)	-	0	15% discount to BIS
5.1(General)	-	0	15% discount to BIS
5.2(Insulation and Wiring)	-	0	15% discount to BIS
5.3(Venting)	-	0	15% discount to BIS
5.4(Temperature, Voltage and Current Management)	-	0	15% discount to BIS
5.5(Terminal Contacts)	-	0	15% discount to BIS
5.6(Assembly of Cells into batteries)	-	0	15% discount to BIS
5.8(Battery Safety Components)	-	0	15% discount to BIS
6(Type Test and Sample Size)	-	5000	15% discount to BIS
7(Specific requirements and tests)	-	0	15% discount to BIS
7.1(Charging procedure for test purposes)	-	2500	15% discount to BIS
7.2(Intended Use)	-	15000	15% discount to BIS
7.3(Reasonably foreseeable misuse)	-	37500	15% discount to BIS
8(Information for safety)	-	1000	15% discount to BIS
8.1(General)	-	0	15% discount to BIS
8.2(Small Cell and battery safety information)	-	0	15% discount to BIS
9(Marking)	-	1500	15% discount to BIS
9.1(Cell Marking)	-	0	15% discount to BIS
9.2(Battery Marking)	-	0	15% discount to BIS
9.3(Caution for ingestion of small cells and batteries)	-	0	15% discount to BIS
9.4(Other information)	-	0	15% discount to BIS
10(Packaging)	-	0	15% discount to BIS
clause 7.3.1 of IS 16047: Part 3(Discharge performance at 20 °C (rated capacity))	-	32500	15% discount to BIS

10 Jul, 2027

-
-

113

Amit Test and Calibration Centre (8172006)

8172006

IS 17505 : Part 1 (2021)

Specification for Thermosetting Insulated Fire Survival Cables for Fixed Installation having Low Emission of Smoke and Corrosive Gases when Affected by Fire for Working Voltages upto and including 1100 Vac and 1500 Vdc

130000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 7.3, Table 1 to 5 of IS 8130:2013 & IS:10810 (Part 5)-1984(Conductor Resistance Test)	-	2000	-
Cl. 7.1.2 of IS 8130 : 2013 & IS:10810 (Part 1)-1984(Annealing Test (for copper))	-	2000	-
Cl. 7.1.1 of IS 8130:2013 & IS:10810 (Part 4)-1984(Persulphate Test for tinned copper)	-	2000	-
IS 191:2007 & IS 440(Copper purity test)	-	5000	-
Cl. 11,14,16, Table 4 and Table 6 of IS 17505 & IS:10810 (Part 6)-1984(Test for overall dimensions and thickness of insulation and sheath)	-	2000	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 36)-1984(Diameter of armour Wire)	-	1000	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 37)-1984(Tensile strength and elongation at break)	-	2000	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 38)-1984(Torsion Test on galvanised steel wire for armouring)	-	3000	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 39)-1984(Winding Test for Formed Wires)	-	3000	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 40)-1984(Uniformity of Zinc coating on Round Steel Wires and Formed Steel Wires (Strips))	-	3000	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 41)-1984(Mass of Zinc coating on Round Steel Wires and Formed Steel Wires (Strips))	-	3000	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 42)-1984(Resistivity test)	-	2000	-
Table 1 and Table 2 of IS 17505 -1: 2021, IS:10810 (Part 7)-1984 & IS:10810 (Part 11)-1984(Tensile Strength and elongation at break before and after ageing.)	-	2000	-
Cl 18.2 of IS 17505-1:2021 & IS:10810 (Part 45)-1984(High voltage test)	-	3000	-
Table 1 of IS 17505-1 :2021 & IS:10810 (Part 43)-1984(Insulation Resistance)	-	5000	-
Cl. 18.6 of IS 17505-1:2021 & IS:10810 (Part 58)-1998(Oxygen index)	-	3500	-
Cl. 18.7 of IS 17505-1:2021 & IS:10810 (Part 64)-2003(Temperature Index)	-	3500	-
Table-1 & Table-2 of IS 17505-1:2021 & IS:10810 (Part 11)-1984(Ageing in air oven.)	-	5000	-
Table-1 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(pH)	-	3500	-
Table-1 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Conductivity)	-	3500	-
Table-1 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(HCl and HBr)	-	3500	-
Table-1 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Presence of Fluorine / Fluorine Content (if required))	-	10000	-
Table 1 of IS 17505-1: 2021 & IS:10810 (Part 21)-1984(Cold impact test)	-	3000	-
Table 1 & 2 of IS 17505-1: 2021 & IS:10810 (Part 30)-1984(Hot set test)	-	5000	-
Table 1 & 2 of IS 17505-1: 2021 & IS:10810 (Part 13)-1984(Ozone Resistance test)	-	15000	-
Cl 18.5.1 of IS 17505-1 :2021 & IS:10810 (Part 61)-1988(Flame test on single cable)	-	3000	-
Table 1 of IS 17505-1:2021 & IS:10810 (Part 12)-1984(Shrinkage test)	-	2000	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(pH)	-	3500	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Conductivity)	-	3500	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(HCl and HBr)	-	3500	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Presence of Fluorine / Fluorine Content (if required))	-	10000	-
Tabel 1 and 2 of IS 17505-1:2021 & IS:10810 (Part 7)-1984(Tensile strength and elongation at break.)	-	2000	-
Tabel 1 and 2 of IS 17505-1:2021 & IS:10810 (Part 11)-1984(Ageing in air oven.)	-	5000	-
Cl 18.6 of IS 17505-1: 2021 & IS:10810 (Part 58)-1998(Oxygen Index.)	-	3500	-
Cl 18.8 of IS 17505-1:2021 & IS:10810 (Part 64)-2003(Temperature Index)	-	3500	-
Table 1 & 2 of IS 17505-1: 2021 & IS:10810 (Part 13)-1984(Ozone resistance test)	-	15000	-
Table 2 of IS 17505-1:2021 & IS:10810 (Part 15)-1984(Hot deformation)	-	3000	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(pH)	-	3500	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Conductivity)	-	3500	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(HCl and HBr)	-	3500	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Presence of Fluorine / Fluorine Content (if required))	-	10000	-
Table 1 of IS 17505-1:2021 & IS:10810 (Part 12)-1984(Shrinkage test)	-	2000	-
Cl 18.2of IS 17505-1:2021 & IS:10810 (Part 45)-1984.(High Voltage test.)	-	3000	-
Cl 18.5of IS 17505-1:2021 & IS:10810 (Part 53)-1984(Flammability Test)	-	3000	-
Table-2 of IS 17505-1:2021 & IS:10810 (Part 20)-1984(Cold bend test)	-	3000	-
Table-2 of IS 17505-1:2021 & IS:10810 (Part 21)-1984(Cold impact test)	-	3000	-
Cl 18.5 of IS 17505-1:2021 & IS:10810 (Part 61)-1988(Flammability Test)	-	3000	-
Cl 18.9 of IS 17505-1:2021(Water immersion test ( effect of water on sheath of cable))	-	7000	-
Cl 18.8 of IS 17505-1:2021& IS:10810 (Part 63)-1993(Smoke density test)	-	35000	-
Cl. 3.5, 18.4 & Annex-E of IS 17505-1:2021(Circuit integrity test under fire)	-	50000	-
Cl. 17.1 Table 9 (iv) e(Heat Shock)	-	2000	-
Cl. 17.1 Table 9 (iv) h(Water absorption (Gravimetric))	-	10000	-
Cl. 17.1 Table 9 (vii) b(Flame test on bunched cable)	-	10000	-
Cl. 17.1 Table 9 (ix)(Abrasion resistance test)	-	5000	-

16 Apr, 2029

-
-

114

Classic Testing & Research Centre (B17), Noida

8180826

IS 16046 : Part 2 (2018)

75000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Parameter Measurement Tolerances)	-	2000	-
5(General Safety Considerations)	-	2000	-
5.1(General)	-	2000	-
5.2(Insulation and Wiring)	-	2000	-
5.3(Venting)	-	2000	-
5.4(Temperature, Voltage and Current Management)	-	2000	-
5.5(Terminal Contacts)	-	2000	-
5.6(Assembly of Cells into batteries)	-	2000	-
5.7(Quality Plan)	-	2000	-
5.8(Battery Safety Components)	-	2000	-
6(Type Test and Sample Size)	-	2000	-
7(Specific requirements and tests)	-	2000	-
7.1(Charging procedure for test purposes)	-	2000	-
7.2(Intended Use)	-	2000	-
7.3(Reasonably foreseeable misuse)	-	2000	-
8(Information for safety)	-	2000	-
8.1(General)	-	2000	-
8.2(Small Cell and battery safety information)	-	2000	-
9(Marking)	-	2000	-
9.1(Cell Marking)	-	2000	-
9.2(Battery Marking)	-	2000	-
9.3(Caution for ingestion of small cells and batteries)	-	2000	-
9.4(Other information)	-	2000	-
10(Packaging)	-	2000	-
clause 7.3.1 of IS 16047: Part 3(Discharge performance at 20 °C (rated capacity))	-	27000	-

15 Oct, 2027

-
-

115

Samridhi Test House Pvt. Ltd.

8184706

IS/ISO 22702 (2018)

Utility lighters Safety specifications First Revision

All Grade / Type / Size / Designation etc.

13500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Flame generation)	-	500	-
4.2(Flame heights)	-	500	-
4.3(Flame- height adjustment)	-	500	-
4.4("Resistance to Spitting or Sputtering and flaring")	-	500	-
4.5(Flame extinction)	-	500	-
4.6(Volumetric Displacement)	-	500	-
5.2(Resistance to dropping)	-	500	-
5.3(Resistance to elevated temperature)	-	500	-
5.4(Burning behavior)	-	1500	-
5.5(Resistance to continuous burn)	-	1500	-
5.6(Resistance to cyclic burn)	-	1100	-
5.7(External Finish)	-	1250	-
5.8(Compatibility with fuel)	-	1500	-
5.9(Resistance to internal pressure)	-	1750	-
6(Refilling Test)	-	400	-

-
-

116

Samridhi Test House Pvt. Ltd.

8184706

IS/ISO 9994 (2018)

Lighters Safety specifications First Revision

All Grade / Type / Size / Designation etc.

16800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.4(Flame Generation)	-	500	-
Cl.4.2(Flame Height)	-	500	-
Cl.4.4(Resistance to spitting or sputtering and flaring)	-	500	-
Cl.4.5(Flame Extinction)	-	1000	-
Cl.4.6(Volumetric displacement of Fuel)	-	1000	-
Cl.4.7(Mass of Fuel)	-	500	-
Cl.5.1(External Finish)	-	250	-
Cl.5.2(Compatibility of Fuel)	-	1500	-
Cl.5.3(Resistance to Fuel Loss)	-	1000	-
Cl.5.4(Resistance to dropping)	-	1000	-
Cl.5.5(Resistance to elevated Temperature)	-	2000	-
Cl.5.6(Resistance to internal Pressure)	-	1200	-
Cl.5.7(Burning Behavior)	-	1250	-
Cl.5.8(Resistance to cyclic burning)	-	1500	-
Cl.5.9(Resistance to Continue Burning)	-	1750	-
6.6, 6.6.3.1(Refilling test-IS/ISO 9994)	-	400	-
6.6, 6.6.3.2(Refilling test-IS/ISO 9994)	-	400	-
Cl.4.3(Flame-Height adjustment)	-	250	-

-
-

117

AANKAN CALIBRATION AND TESTING CENTRE LLP, DANTLI

7184406

IS 15778 (2007)

Chlorinated polyvinyl chloride (Cpvc) pipes for potable hot and cold water distribution supplies - Specification

Class 1/2/3, SDR:11/13.5/17, Nominal size:15 to 150 mm

99500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5 Table 1(Classification of pipes)	-	0	NOT A TEST
6.3.1 Annex B(Chloride content)	-	2000	RESIN (Chloride content)TESTING CHARGE Rs 2000/- Compound (Chloride content)TESTING CHARGE Rs 2000/-
6.3.2 Annex C(Verification of the Malfunction Temperature, Tmal: )	-	7500	(Verification of the Malfunction) TESTING CHARGE Rs 7500/-
6.3.2 IS 13360 (Part 3/See 1)(Density)	-	12000	(compound properties testing )TESTING CHARGE Rs 12000/-
7.1 IS 12235 (Part 1) Table 2(Dimension of Pipes: Mean outside Diameter)	-	3000	(Dimension of Pipe)TESTING CHARGE Rs 3000/-
7.1,7.1.1 IS 12235 (Part 1) Table 2(Outside Diameter at any point)	-	3000	(Dimension of Pipe)TESTING CHARGE Rs 3000/-
7.1.2 IS 12235 (Part 1) Table 2(Wall Thickness )	-	3000	(Dimension of Pipe)TESTING CHARGE Rs 3000/-
7.1.3 (Effective length)	-	3000	(Dimension of Pipe)TESTING CHARGE Rs 3000/-
8(Pipe Ends)	-	3000	(Dimension of Pipe)TESTING CHARGE Rs 3000/-
9(PHYSICAL AND CHEMICAL CHARACTERISTICS)	-	0	OK
9.1(Visual Appearance)	-	500	(Visual Appearance) TESTING CHARGE Rs 500/-
9.1(Visual Appearance)	-	0	repeat
9.2 IS 12235 (Part 3)(Opacity)	-	2500	(Opacity) TESTING CHARGE Rs 2500/-
Cl. 9.3,IS 4985 Cl. 10.3(Lead (first extraction))	-	5000	(Effect on water ) TESTING CHARGE Rs 5000/-
Cl. 9.3,IS 4985 Cl. 10.3(Lead (third extraction))	-	5000	(Effect on water ) TESTING CHARGE Rs 5000/-
Cl. 9.3,IS 4985 Cl. 10.3(Dialkyl tin C4 and higher homologues measured as tin (third extraction))	-	5000	(Effect on water ) TESTING CHARGE Rs 5000/-
Cl. 9.3,IS 4985 Cl. 10.3(Cadmium (for all three extracts) )	-	5000	(Effect on water ) TESTING CHARGE Rs 5000/-
Cl. 9.3,IS 4985 Cl. 10.3(Mercury (for all three extracts) )	-	5000	(Effect on water ) TESTING CHARGE Rs 5000/-
Cl. 9.3,IS 4985 Cl. 10.3(Other toxic substances such as 'di-n-octyl-tin- s-s bis iso-octyl mercapto acetate' and 'butyl stearate' (third extraction) )	-	5000	(Effect on water ) TESTING CHARGE Rs 5000/-
Cl. 9.3,IS 4985 Cl. 10.3(Other toxic substances including di-n-octyl-tin- s-s bis iso-octyl mercapto acetate' and 'butyl stearate')	-	0	repeat
9.4 IS 12235(Part 5/Sec 1 and Sec 2)(Reversion Test : When tested by the method prescribed in IS 12235(Part 5/Sec 1 and Sec 2), a length of pipe 200 + 20 mm long shall not alter in length by more than 5 percent.)	-	3000	(Reversion Test) TESTING CHARGE Rs 3000/-
9.5 IS 12235(Part 2)(Vicat Softening Temperature: When tested by the method prescribed in IS 12235(Part 2), the Vicat softening temperature of the specimen shall not be less than 110°C.)	-	3000	(Vicat Softening Temperature ) TESTING CHARGE Rs 3000
9.6 IS 12235(Part 14)(Density)	-	2000	(Density) TESTING CHARGE Rs 2000/-
10(Mechanical Properties)	-	0	OK
10.1 Table 3 IS 12235 (Part 8/Sec 1)(Hydrostatic Characteristics)	-	2999.97	(Hydrostatic Characteristics) 1 Hr TESTING CHARGE Rs 3000/-
10.1 Table 3 IS 12235 (Part 8/Sec 1)(Hydrostatic Characteristics)	-	5000	(Hydrostatic Characteristics) 165 Hr TESTING CHARGE Rs 5000/-
10.1 Table 3 IS 12235 (Part 8/Sec 1)(Hydrostatic Characteristics)	-	7000	(Hydrostatic Characteristics) 1000 Hr TESTING CHARGE Rs 7000
10.2 Table 3 IS 12235 (Part 8/Sec 1)(Thermal Stability by Hydrostatic Pressure Testing)	-	35000	(Thermal Stability by Hydrostatic Pressure Testing) TESTING CHARGE Rs 35000/-
10.3 IS 4985 Table 4(Resistance to External Blow at O°C: When tested by the method prescribed in IS 4985, with classified striker mass and drop height as given in Table 4, the pipe shall have a true impact rate of not more than 10 percent.)	-	3000	(Resistance to External Blow at O°C) TESTING CHARGE Rs 3000/-
10.4 IS 12235(Part 19)(Flattening Test)	-	3000	(Flattening Test) TESTING CHARGE Rs 3000/-
10.5 IS 12235(Part 13)(Tensile Strength : When tested by the method prescribed in IS 12235(Part 13), the tensile strength at yield shall not be less than 50 MPaat 27±2°C. )	-	3000	(Tensile Strength) TESTING CHARGE Rs 3000
5 Table 1(Classification of pipes)	-	0	OK
6.2.1 Annex B(Chloride Content of Resin)	-	0	repeat
6.3(Compound Properties)	-	12000	(Compound Properties) testing charge 12000/-
6.3.1 Annex B(Chloride content)	-	0	repeat
6.3.2 Annex C(Verification of the Malfunction Temperature, Tmal: )	-	0	repeat
6.3.2 IS 13360 (Part 3/See 1)(Density)	-	0	repeat
7.1 IS 12235 (Part 1) Table 2(Dimension of Pipes: Mean outside Diameter)	-	0	repeat
7.1,7.1.1 IS 12235 (Part 1)Table 2(Outside Diameter at any point (Minimum))	-	0	repeat
7.1.2 IS 12235 (Part 1)Table 2(Wall Thickness (Minimum))	-	0	repeat
7.1.3 (Effective length)	-	0	repeat
8.0(Pipe Ends)	-	0	repeat
9.0(PHYSICAL AND 1CHARACTERISTICS)	-	0	repeat
9.1(Visual Appearance)	-	0	repeat
9.1(Visual Appearance)	-	0	repeat
9.2 IS 12235 (Part 3)(Opacity)	-	0	repeat
Cl. 9.3,IS 4985 Cl. 10.3(Lead (first extraction))	-	0	repeat
Cl. 9.3,IS 4985 Cl. 10.3(Lead (third extraction))	-	0	repeat
Cl. 9.3,IS 4985 Cl. 10.3(Dialkyl tin C4 and higher homologues measured as tin (third extraction))	-	0	repeat
Cl. 9.3,IS 4985 Cl. 10.3(Cadmium (for all three extracts) )	-	0	repeat
Cl. 9.3,IS 4985 Cl. 10.3(Mercury (for all three extracts) )	-	0	repeat
Cl. 9.3,IS 4985 Cl. 10.3(Other toxic substances such as 'di-n-octyl-tin- s-s bis iso-octyl mercapto acetate' and 'butyl stearate' (third extraction) )	-	0	repeat
Cl. 9.3,IS 4985 Cl. 10.3(Other toxic substances including di-n-octyl-tin- s-s bis iso-octyl mercapto acetate' and 'butyl stearate')	-	0	repeat
9.4 IS 12235(Part 5/Sec 1 and Sec 2)(Reversion Test : When tested by the method prescribed in IS 12235(Part 5/Sec 1 and Sec 2), a length of pipe 200 + 20 mm long shall not alter in length by more than 5 percent.)	-	0	repeat
9.5 IS 12235(Part 2)(Vicat Softening Temperature: When tested by the method prescribed in IS 12235(Part 2), the Vicat softening temperature of the specimen shall not be less than 110°C.)	-	0	repeat
9.6 IS 12235(Part 14)(Density)	-	0	repeat
10.0(Mechanical Properties)	-	0	repeat
10.1 Table 3 IS 12235 (Part 8/Sec 1)(Hydrostatic Characteristics)	-	0	repeat
10.1 Table 3 IS 12235 (Part 8/Sec 1)(Hydrostatic Characteristics)	-	0	repeat
10.1 Table 3 IS 12235 (Part 8/Sec 1)(Hydrostatic Characteristics)	-	0	repeat
10.2 Table 3 IS 12235 (Part 8/Sec 1)(Thermal Stability by Hydrostatic Pressure Testing)	-	0	repeat
10.3 IS 4985 Table 4(Resistance to External Blow at O°C: When tested by the method prescribed in IS 4985, with classified striker mass and drop height as given in Table 4, the pipe shall have a true impact rate of not more than 10 percent.)	-	0	repeat
10.4 IS 12235(Part 19)(Flattening Test)	-	0	repeat
10.5 IS 12235(Part 13)(Tensile Strength : When tested by the method prescribed in IS 12235(Part 13), the tensile strength at yield shall not be less than 50 MPaat 27±2°C. )	-	0	repeat
7.1.2(Wall Thickness (Maximum))	-	0	repeat
7.1.1(Outside Diameter at any point (Maximum))	-	0	repeat
6.3(K value Test)	-	3000	ok
6.3.3(Density)	-	0	repeat

-
-

118

Samridhi Test House Pvt. Ltd.

8184706

IS 5382 (2025)

RUBBER SEALS JOINT RINGS FOR WATER SUPPLY DRAINAGE AND SEWERAGE PIPELINES SPECIFICATION FOR MATERIALS ( Third Revision )

All Grade / Type / Size / Designation

29500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5.1(General requirement)	-	800	-
Cl-5.2(Effect on water quality)	-	800	-
Cl-5.3(Microbiological deterioration)	-	800	-
Cl-5.4(Dimensional tolerances)	-	800	-
Cl-5.5(Imperfections and defects)	-	800	-
Cl-5.6(Hardness)	-	800	-
Cl-5.7(Tensile strength and elongation at break)	-	1500	-
Cl-5.8.1(Compression set in air-General)	-	1500	-
Cl-5.8.2(Compression set in air-Compression set at 23 °C and 70 °C.)	-	1500	-
Cl-5.8.3(Compression set in air-Low-temperature compression set at 72–10 °C)	-	1500	-
Cl-5.9(Accelerated ageing in air-7 days at 70 °C.)	-	1600	-
Cl-5.9(Hardness change, max./min.)	-	800	-
Cl-5.9(Tensile-strength change, max)	-	1500	-
Cl-5.9(Elongation change, max./min)	-	800	-
Cl-5.10(Stress relaxation in compression-7 days at 23 °C)	-	1500	-
Cl-5.10(Stress relaxation in compression-100 days at 23 °C)	-	1500	-
Cl-5.11(Volume change in water max./ min. 7 days at 70 °C)	-	500	-
Cl-5.12(Ozone resistance)	-	1000	-
Cl-5.13.1(Spliced joints)	-	800	-
Cl-5.13.2(Strength of spliced joints)	-	800	-
Cl-6.1(Low temperature performance at –25 °C, (type L))	-	1000	-
Cl-6.1(Compression set, max. 72 h at −25 °C)	-	1500	-
Cl-6.1(Hardness change, max 168 h at −25 °C)	-	1500	-
Cl-6.2(Volume change in oil, max./min. 72 h at 70 °C (type O))	-	1500	-
Cl-6.3(Lifetime estimation, (type LT).)	-	800	-
Cl-6.4(Summary of optional property requirements)	-	800	-
Cl-11(Marking and labelling)	-	800	-

-
-

119

NATIONAL TEST HOUSE-ER (NTH), KOLKATA

5140804

IS 13995 (1995)

Unlined moulded rubber boots - Specification

4500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1.7(Size)	-	1000	-
5.1.5(Flexing resistance of upper)	-	2000	-
5.1.4(Resistance to dry heat ageing )	-	2000	-
5.1.3(Tear Strength)	-	1000	-
5.1.2(Tensile Strength (after ageing))	-	3000	-
5.1.1(Tensile Strength (before ageing))	-	2000	-
4.1(Thickness )	-	1000	-

14 Jun, 2027

-
-

120

NATIONAL TEST HOUSE-ER (NTH), KOLKATA

5140804

IS 13893 (1994)

Polyurethane soles semirigid - specification

9150 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.3.2(Ageing test)	-	2000	-
4.3(Ross Flex test)	-	2000	-
4.3(Flexural strength )	-	2000	-
4.3(Abrasion Resistance)	-	2000	-
4.3(Elongation at break)	-	1000	-
4.3(Tensile Strength )	-	2000	-
4.3(Hardness Shore(A))	-	1000	-
4.3(Relative density )	-	1000	-
4.2(Thickness )	-	1000	-

14 Jun, 2027

-
-

First
Prev
3
4
5
6
Next
Last

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number