BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

15632 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

4591

ALPHA TEST HOUSE PVT LTD, BAHADURGARH

8185306

IS 5405 (2019)

Sanitary napkins – Specification (second revision)

19000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 5(SIZES, Regular )	-	19000	-
Cl 5(SIZES, Large)	-	19000	-
Cl 5(SIZES, Extra Large)	-	19000	-
Cl 5(SIZES, XXL)	-	19000	-
Cl 5(Absorbent Capacity, Regular )	-	19000	-
Cl 5(Absorbent Capacity, Large)	-	19000	-
Cl 5(Absorbent Capacity, Extra Large)	-	19000	-
Cl 5(Absorbent Capacity, XXL)	-	19000	-
Cl 7.1(pH Value, IS 1390 (cold method) for all sizes)	-	19000	-
Cl 7.2(Ability to Withstand Pressure after Absorption, for all sizes, Annex B)	-	19000	-
Cl 7.3.1(Bacterial and Fungal Bioburden, 7.3.1.1, ISO 11737 (Part 1))	-	19000	-
Cl7.3.2(Test for Common Skin Pathogen — Staphylococcus Aureus, 7.3.2.1, IS 5887 (Part 2))	-	19000	-
Cl 5(SIZES, Regular )	-	19000	-
Cl 5(SIZES, Large)	-	19000	-
Cl 5(SIZES, Extra Large)	-	19000	-
Cl 5(SIZES, XXL)	-	19000	-
Cl 5(Absorbent Capacity, Regular )	-	19000	-
Cl 5(Absorbent Capacity, Large)	-	19000	-
Cl 5(Absorbent Capacity, Extra Large)	-	19000	-
Cl 5(Absorbent Capacity, XXL)	-	19000	-
Cl 7.1(pH Value, IS 1390 (cold method) for all sizes)	-	19000	-
Cl 7.2(Ability to Withstand Pressure after Absorption, for all sizes, Annex B)	-	19000	-
Cl 7.3.1(Bacterial and Fungal Bioburden, 7.3.1.1, ISO 11737 (Part 1))	-	19000	-
Cl7.3.2(Test for Common Skin Pathogen — Staphylococcus Aureus, 7.3.2.1, IS 5887 (Part 2))	-	19000	-
3.1(Cover/Top sheet)	-	19000	-
3.2(Absorbent Core)	-	19000	-
3.3(Barrier or Bottom Sheet)	-	19000	-
4.1 (1)(Type and shapes of sanitary napkins)	-	19000	-
4.2(Sanitary napkins shape & design)	-	19000	-
6.0(Manufacture, workmanship & finish)	-	19000	-
7.6(Pthalate test)	-	19000	-
Cl 7.4(Biocompatibility Evaluation — Cytotoxicity, Irritation and Skin Sensitization, IS/ISO 10993 Part 5 and IS/ISO 10993 Part 10)	-	19000	-
Cl 7.5(Biodegradability and Compostability (Optional), IS/ISO 17088.)	-	19000	-
Cl 7.4(Biocompatibility Evaluation — Cytotoxicity, Irritation and Skin Sensitization, IS/ISO 10993 Part 5 and IS/ISO 10993 Part 10)	-	19000	-
Cl 7.5(Biodegradability and Compostability (Optional), IS/ISO 17088.)	-	19000	-
CL 7.4(Biocompatibility Evaluation - Cytotoxicity, Irritation and Skin Sensitization (Optional))	-	19000	-
CL 7.5(Compostability or Biodegradability during Composting (Optional))	-	19000	-

08 May, 2028

-
-

4592

Accurate Universal Laboratoies Private Limited, Ahmedabad

7174006

IS 5405 (2025)

Disposable Sanitary Napkin/Panty Liner/Maternity Pad/Period Panty - Specification ( Third Revision )

10500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(Cover/Top sheet)	-	10500	-
3.2(Absorbent core)	-	10500	-
3.3(Barrier or bottom sheet)	-	10500	-
4.1(Types)	-	10500	-
4.2(shapes)	-	10500	-
5(Sizes)	-	10500	-
Cl. 5 Table-1(Type)	-	10500	-
Cl. 5 Table-1(Size class)	-	10500	-
Cl. 5 Table-1(Length (Absorbent core only))	-	10500	-
Cl. 5 Table-1(Width (Absorbent core only))	-	10500	-
6.1(Manufacture, workmanship and finish)	-	10500	-
6.2(Manufacture, workmanship and finish)	-	10500	-
7.1(pH Test)	-	10500	-
7.2("Ability to Withstand Pressure after Absorption: Liquid Absorption ml, Min")	-	10500	-
7.3.1(Bacterial and Fungal Bioburden)	-	10500	-
7.3.2(Staphylococcus aureus)	-	10500	-
Cl 7.5(Phthalate test- Combination)	-	10500	-
3.1(Cover/Top Sheet (non sterile gauze))	-	10500	-
3.1(Cover/Top Sheet (sterile gauze))	-	10500	-
5(Size)	-	10500	-
7.7(Anti bacterial activity value (Optional) (IS/ISO 20743))	-	10500	-

19 Sep, 2029

-
-

4593

FOOTWEAR DESIGN AND DEVELOPMENT INSTITUTE (FDDI), NOIDA

8112814

IS 3976 (2018)

Safety Rubber Canvas Boots for Miners Ã¢â‚¬ Specification ( Sixth Revision )

16500 View breakup
-

Clause No.	Exclusion	Remark
Cl.5.2.5 Compact Sole Heel Cl.5.2.5.1 IS 3400 (Part 2)(requirements prescribed in col 3 of Table 2 when tested as per corresponding test methods prescribed in col 4 of Table 2. i)i) Hardness (IRHD)	-	For 3976: 2018 mechanical test 16500/- and chemical test 11350 /- , For 3976 :2018 amendment no1:2021 AND amendment no.2: 2024 - Mechanical test 16500/ and chemical test 23450/-
Cl.6.3 Tear Strength of Compact Outsole( When outsoles are tested in accordance to 8.2 of IS 15298 (Part 1), the tear strength shall be not less than 8 kN/m for material having density higher than 0.9/cm³ and when density of material is less than or equal to 0.9 g/cm³, tear strength shall not be less than 5 kN/m.)	-	For 3976: 2018 mechanical test 16500/- and chemical test 11350 /- , For 3976 :2018 amendment no1:2021 AND amendment no.2: 2024 - Mechanical test 16500/ and chemical test 23450/-
Cl.5.2.3 Coated Binding Material IS 1954( Coated binding materials shall conform to the requirements given in col 3 of Table 1 when tested according to the methods prescribed in col 4 of Table 1. i)Width in mm, )	-	For 3976: 2018 mechanical test 16500/- and chemical test 11350 /- , For 3976 :2018 amendment no1:2021 AND amendment no.2: 2024 - Mechanical test 16500/ and chemical test 23450/-
Cl.5.2.1.4 ( Type 2 footwear, the composite upper material shall comply with requirements of water coefficient as prescribed in 5.4.6 of IS 15298 (Part 2).)	-	For 3976: 2018 mechanical test 16500/- and chemical test 11350 /- , For 3976 :2018 amendment no1:2021 AND amendment no.2: 2024 - Mechanical test 16500/ and chemical test 23450/-
Cl.5.13 Energy Absorption Test(When footwear is tested in accordance with the method prescribed in 5.14 of IS 15298 (Part 1), the energy absorption of the seat region shall not be less than 20 J.)	-	For 3976: 2018 mechanical test 16500/- and chemical test 11350 /- , For 3976 :2018 amendment no1:2021 AND amendment no.2: 2024 - Mechanical test 16500/ and chemical test 23450/-
Cl.5.2.3 Coated Binding Material Annex C(ii) Breaking load in N, Min (50 cm grip length test specimen) )	-	For 3976: 2018 mechanical test 16500/- and chemical test 11350 /- , For 3976 :2018 amendment no1:2021 AND amendment no.2: 2024 - Mechanical test 16500/ and chemical test 23450/-
Cl.5.2.1.4 ( Type 2 footwear, the composite upper material shall comply with requirements of water vapour permeability as prescribed in 5.4.6 of IS 15298 (Part 2).)	-	For 3976: 2018 mechanical test 16500/- and chemical test 11350 /- , For 3976 :2018 amendment no1:2021 AND amendment no.2: 2024 - Mechanical test 16500/ and chemical test 23450/-
CL.5.2.10 Counter Stiffener( A counter stiffener, made out of textile reinforced withpolymer/rubber including (thermoplastic) having thickness not less than 1.5 mm is to be stitched at inside of upper so as to fortify the back of the footwear at joints of quarter.)	-	For 3976: 2018 mechanical test 16500/- and chemical test 11350 /- , For 3976 :2018 amendment no1:2021 AND amendment no.2: 2024 - Mechanical test 16500/ and chemical test 23450/-
Cl.5.2.1 Upper Cl.5.2.1.1 IS 3400(Part 5)( Composite upper material shall comply with consolidation test as per 5.10.(IS 3400 (Part 5). There shall be no separation at a load of 1.5 kg.))	-	For 3976: 2018 mechanical test 16500/- and chemical test 11350 /- , For 3976 :2018 amendment no1:2021 AND amendment no.2: 2024 - Mechanical test 16500/ and chemical test 23450/-
Cl.5.2.1.2( Composite upper material shall comply with tear strength as per 5.4.3 of IS 15298 (Part 2).)	-	For 3976: 2018 mechanical test 16500/- and chemical test 11350 /- , For 3976 :2018 amendment no1:2021 AND amendment no.2: 2024 - Mechanical test 16500/ and chemical test 23450/-
Cl.5.2.1.3 , Cl.6.5 of IS 15298 (Part 1).( Composite upper material shall develop no cracks before 150 000 cycles when tested in accordance with 6.5 of IS 15298 (Part 1).)	-	For 3976: 2018 mechanical test 16500/- and chemical test 11350 /- , For 3976 :2018 amendment no1:2021 AND amendment no.2: 2024 - Mechanical test 16500/ and chemical test 23450/-
Cl.5.2.1.5( Inner layer of upper shall meet requirement of abrasion resistance as prescribed in 5.5.2 of IS 15298 (Part 2).)	-	For 3976: 2018 mechanical test 16500/- and chemical test 11350 /- , For 3976 :2018 amendment no1:2021 AND amendment no.2: 2024 - Mechanical test 16500/ and chemical test 23450/-
Cl.5.2.2 Compact Insole/Compact Insocks/Counter Stiffener Lining(Textile material shall be used as lining material for compact insole/compact insocks / counter stiffener. It shall meet the requirement of tear strength as prescribed in 5.6.1 of IS 15298 (Part 2).)	-	For 3976: 2018 mechanical test 16500/- and chemical test 11350 /- , For 3976 :2018 amendment no1:2021 AND amendment no.2: 2024 - Mechanical test 16500/ and chemical test 23450/-
Cl.5.2.2.1 Abrasion resistance of compact insole/insocks/ counter stiffener( When textiles used as lining for all the above are tested in accordance with 6.12 of IS 15298 (Part 1), the lining shall not develop any holes before the following number of cycles has been performed:)	-	For 3976: 2018 mechanical test 16500/- and chemical test 11350 /- , For 3976 :2018 amendment no1:2021 AND amendment no.2: 2024 - Mechanical test 16500/ and chemical test 23450/-
Cl.5.2.3.1 In case of cotton black binding materia( the same shall be free from sulphur dyes when tested in accordance with Annex B.)	-	For 3976: 2018 mechanical test 16500/- and chemical test 11350 /- , For 3976 :2018 amendment no1:2021 AND amendment no.2: 2024 - Mechanical test 16500/ and chemical test 23450/-
Cl.5.2.5 Compact Sole Heel 5.2.5.1 IS 3400 (Part 4)(ii)*Change in hardness after accelerated ageing at 100 ± 2 °C for 24 h )	-	For 3976: 2018 mechanical test 16500/- and chemical test 11350 /- , For 3976 :2018 amendment no1:2021 AND amendment no.2: 2024 - Mechanical test 16500/ and chemical test 23450/-
Cl.5.2.5.3 Ageing for whole footwear(When rubber is used for manufacturing boots or when the outer sole heel is made of bi-polymer, the finished boots shall be aged at 100 ± 2°C for 24 h. On completion of test, all rubber components shall not develop any sign of tackiness or brittleness.)	-	For 3976: 2018 mechanical test 16500/- and chemical test 11350 /- , For 3976 :2018 amendment no1:2021 AND amendment no.2: 2024 - Mechanical test 16500/ and chemical test 23450/-
Cl.5.2.5.4 Thickness of compact sole hee(Thickness of compact sole heel of the boots shall comply with the thickness and material requirements prescribed in Table 3.)	-	For 3976: 2018 mechanical test 16500/- and chemical test 11350 /- , For 3976 :2018 amendment no1:2021 AND amendment no.2: 2024 - Mechanical test 16500/ and chemical test 23450/-
Cl.5.2.5.4 Thickness of compact sole hee(of black cotton thread, the same shall be free from sulphur dyes when tested in accordance with Annex B.)	-	For 3976: 2018 mechanical test 16500/- and chemical test 11350 /- , For 3976 :2018 amendment no1:2021 AND amendment no.2: 2024 - Mechanical test 16500/ and chemical test 23450/-
Cl.5.2.6 Thread for Upper Closing( The length (m/kg) and construction of sewing thread shall conform to requirements as prescribed in Table 4.)	-	For 3976: 2018 mechanical test 16500/- and chemical test 11350 /- , For 3976 :2018 amendment no1:2021 AND amendment no.2: 2024 - Mechanical test 16500/ and chemical test 23450/-
Cl.5.2.8.1( The boots shall be provided with laces having minimum length of 115 cm for Type 1 and minimum 100 cm for Type 2.)	-	For 3976: 2018 mechanical test 16500/- and chemical test 11350 /- , For 3976 :2018 amendment no1:2021 AND amendment no.2: 2024 - Mechanical test 16500/ and chemical test 23450/-
Cl.5.2.8.2 (Minimum breaking load of 60 kg is to be achieved when tested between 18 cm grip length in accordance with Annex C.)	-	For 3976: 2018 mechanical test 16500/- and chemical test 11350 /- , For 3976 :2018 amendment no1:2021 AND amendment no.2: 2024 - Mechanical test 16500/ and chemical test 23450/-
Cl.5.2.8.3( In case of cotton lace of black colour, the same shall be free from sulphur dyes when tested in accordance with Annex B. Two ends of the laces shall be provided with plastic tips.)	-	For 3976: 2018 mechanical test 16500/- and chemical test 11350 /- , For 3976 :2018 amendment no1:2021 AND amendment no.2: 2024 - Mechanical test 16500/ and chemical test 23450/-
Cl.5.2.9 Eyelets( Aluminum eyelets of external collar diameter not less than 10 mm and wall thickness of 0.30 to 0.35 mm shall be used.)	-	For 3976: 2018 mechanical test 16500/- and chemical test 11350 /- , For 3976 :2018 amendment no1:2021 AND amendment no.2: 2024 - Mechanical test 16500/ and chemical test 23450/-
Cl.5.3.6( A designed foxing of width of minimum 25 mm and of thickness of minimum 2 mm is to be provided. The foxing shall not extend the edges of the outer sole.)	-	For 3976: 2018 mechanical test 16500/- and chemical test 11350 /- , For 3976 :2018 amendment no1:2021 AND amendment no.2: 2024 - Mechanical test 16500/ and chemical test 23450/-
Cl.5.3.7( Two pairs of detachable insocks are to be provided. The insocks shall be compact in nature having thickness not less than 2 mm.)	-	For 3976: 2018 mechanical test 16500/- and chemical test 11350 /- , For 3976 :2018 amendment no1:2021 AND amendment no.2: 2024 - Mechanical test 16500/ and chemical test 23450/-
Cl.5.5 Mass(The mass of one pair of finished footwear of size 8 shall not exceed 1 500 g for Type 1 and 1 400 g for Type 2 with an increase or decrease of 100 g for each bigger or smaller size, respectively.)	-	For 3976: 2018 mechanical test 16500/- and chemical test 11350 /- , For 3976 :2018 amendment no1:2021 AND amendment no.2: 2024 - Mechanical test 16500/ and chemical test 23450/-
Cl.5.6( Height of Upper Height of upper of the boots shall conform to column 5 (Design C) and column 4 (Design B) of 5.2.2, Table 4 of IS 15298 (Part 2) for Type 1 and Type 2, respectively when measured as per 6.2 of IS 15298 (Part 1) on the inside of the back of the footwear and from seat of the insole to top edge of the upper.)	-	For 3976: 2018 mechanical test 16500/- and chemical test 11350 /- , For 3976 :2018 amendment no1:2021 AND amendment no.2: 2024 - Mechanical test 16500/ and chemical test 23450/-
Cl.5.7 Performance Test(When safety footwear is tested in accordance with the method described in 5.4 of IS 15298 (Part 1), at an impact energy of (200 ± 4) J, the clearance under the toecap at the moment of impact shall be in accordance with Table 5. In addition, the toecap shall not develop any cracks which go through the material, that is, through which light can be seen.)	-	For 3976: 2018 mechanical test 16500/- and chemical test 11350 /- , For 3976 :2018 amendment no1:2021 AND amendment no.2: 2024 - Mechanical test 16500/ and chemical test 23450/-
Cl.5.8 Upper/Outsole Bond Strength(When the footwear is tested in accordance with the method prescribed in 5.2 of IS 15298 (Part 1), the bond strength shall not be less than 4.0 N/mm, unless there is tearing of the sole in which case the bond strength shall not be less than 3.0 N/mm.)	-	For 3976: 2018 mechanical test 16500/- and chemical test 11350 /- , For 3976 :2018 amendment no1:2021 AND amendment no.2: 2024 - Mechanical test 16500/ and chemical test 23450/-
Cl.5.9 Sole Interlayer Bond Strength for Bi-polymer( and Bi-density Sole When tested in accordance with 5.2 of IS 15298 (Part 1), the bond strength between the outer or cleated layer and the adjacent layer shall not be less than 4.0 N/mm unless there is tearing of any part of the sole, in which case the bond strength shall not be less than 3.0 N/mm.)	-	For 3976: 2018 mechanical test 16500/- and chemical test 11350 /- , For 3976 :2018 amendment no1:2021 AND amendment no.2: 2024 - Mechanical test 16500/ and chemical test 23450/-
Cl.5.10 Consolidation Test( Representative sample of width 25 ± 0.5 mm are cut out from the quarter of the upper along the length of boot. The plies are separated by breaking the bond. Carry out the test on two specimens in accordance with IS 3400 (Part 5). Th)	-	For 3976: 2018 mechanical test 16500/- and chemical test 11350 /- , For 3976 :2018 amendment no1:2021 AND amendment no.2: 2024 - Mechanical test 16500/ and chemical test 23450/-
Cl.5.11 Compression Resistance( 5.11.1 When safety boots are tested in accordance with 5.5 of IS 15298 (Part 1), the clearance under the toe cap at a compression load of 15 kN ± 0.1 kN shall be in accordance with Table 5.)	-	For 3976: 2018 mechanical test 16500/- and chemical test 11350 /- , For 3976 :2018 amendment no1:2021 AND amendment no.2: 2024 - Mechanical test 16500/ and chemical test 23450/-
Cl.5.12 Internal Length of Toe Cap( For safety boots, internal length of the toe cap shall meet the specification given in Table 5 of IS 15298 (Part 2) when tested as per 5.3 of IS 15298 (Part 1).)	-	For 3976: 2018 mechanical test 16500/- and chemical test 11350 /- , For 3976 :2018 amendment no1:2021 AND amendment no.2: 2024 - Mechanical test 16500/ and chemical test 23450/-
Cl.6.1 Abrasion Resistance of Compact Outsole( When outsole is tested in accordance with 8.3 of IS 15298 (Part 1), the relative volume loss shall not be greater than 250 mm³ for materials having density 0.9 g/cm³ or less, and not greater than 150 mm³ for materials with density greater than 0.9 g/cm³.)	-	For 3976: 2018 mechanical test 16500/- and chemical test 11350 /- , For 3976 :2018 amendment no1:2021 AND amendment no.2: 2024 - Mechanical test 16500/ and chemical test 23450/-
Cl.6.2 Flexing Resistance of Compact Outsole( When outsole is tested in accordance with 8.4 of IS 15298 (Part 1), the cut growth shall not be greater than 4 mm before 30 000 cycles.)	-	For 3976: 2018 mechanical test 16500/- and chemical test 11350 /- , For 3976 :2018 amendment no1:2021 AND amendment no.2: 2024 - Mechanical test 16500/ and chemical test 23450/-
Cl.6.4 Resistance to Hot Contact( — Sole Heel When sole heel is tested in accordance with 8.7 of IS 15298 (Part 1), the material shall not melt/deform and shall not develop any cracks when bent around the mandrel.)	-	For 3976: 2018 mechanical test 16500/- and chemical test 11350 /- , For 3976 :2018 amendment no1:2021 AND amendment no.2: 2024 - Mechanical test 16500/ and chemical test 23450/-
Cl.6.5 Hydrolysis( When bottom sole or other components are made out of polyurethane, the same shall be tested in accordance with 8.5 of IS 15298 (Part 1) and the same shall comply with 5.8.5 of IS 15298 (Part 2).)	-	For 3976: 2018 mechanical test 16500/- and chemical test 11350 /- , For 3976 :2018 amendment no1:2021 AND amendment no.2: 2024 - Mechanical test 16500/ and chemical test 23450/-
4(Types)	-	For 3976: 2018 mechanical test 16500/- and chemical test 11350 /- , For 3976 :2018 amendment no1:2021 AND amendment no.2: 2024 - Mechanical test 16500/ and chemical test 23450/-
5.1(Design)	-	For 3976: 2018 mechanical test 16500/- and chemical test 11350 /- , For 3976 :2018 amendment no1:2021 AND amendment no.2: 2024 - Mechanical test 16500/ and chemical test 23450/-
5.10(consolidation test IS 3400 (Part 5))	-	For 3976: 2018 mechanical test 16500/- and chemical test 11350 /- , For 3976 :2018 amendment no1:2021 AND amendment no.2: 2024 - Mechanical test 16500/ and chemical test 23450/-
5.2.4(Reinforcing Material)	-	For 3976: 2018 mechanical test 16500/- and chemical test 11350 /- , For 3976 :2018 amendment no1:2021 AND amendment no.2: 2024 - Mechanical test 16500/ and chemical test 23450/-
5.10(Consolidation Test IS 3400 (Part 5) : 1986)	-	For 3976: 2018 mechanical test 16500/- and chemical test 11350 /- , For 3976 :2018 amendment no1:2021 AND amendment no.2: 2024 - Mechanical test 16500/ and chemical test 23450/-
8(CHEMICAL REQUIREMENTS)	-	For 3976: 2018 mechanical test 16500/- and chemical test 11350 /- , For 3976 :2018 amendment no1:2021 AND amendment no.2: 2024 - Mechanical test 16500/ and chemical test 23450/-
9, 9.1(BIS CERTIFICATION MARKING)	-	For 3976: 2018 mechanical test 16500/- and chemical test 11350 /- , For 3976 :2018 amendment no1:2021 AND amendment no.2: 2024 - Mechanical test 16500/ and chemical test 23450/-
10(Marking)	-	For 3976: 2018 mechanical test 16500/- and chemical test 11350 /- , For 3976 :2018 amendment no1:2021 AND amendment no.2: 2024 - Mechanical test 16500/ and chemical test 23450/-
11(Packing)	-	For 3976: 2018 mechanical test 16500/- and chemical test 11350 /- , For 3976 :2018 amendment no1:2021 AND amendment no.2: 2024 - Mechanical test 16500/ and chemical test 23450/-
Cl. 5.2.4(Reinforcing Material)	-	For 3976: 2018 mechanical test 16500/- and chemical test 11350 /- , For 3976 :2018 amendment no1:2021 AND amendment no.2: 2024 - Mechanical test 16500/ and chemical test 23450/-
Cl. 5.2.8.4(Colour of the lace)	-	For 3976: 2018 mechanical test 16500/- and chemical test 11350 /- , For 3976 :2018 amendment no1:2021 AND amendment no.2: 2024 - Mechanical test 16500/ and chemical test 23450/-
11(PACKING)	-	For 3976: 2018 mechanical test 16500/- and chemical test 11350 /- , For 3976 :2018 amendment no1:2021 AND amendment no.2: 2024 - Mechanical test 16500/ and chemical test 23450/-
Cl. 5.3(Construction 5.3.1,5.3.3,5.3.4)	-	For 3976: 2018 mechanical test 16500/- and chemical test 11350 /- , For 3976 :2018 amendment no1:2021 AND amendment no.2: 2024 - Mechanical test 16500/ and chemical test 23450/-
10(Marking)	-	For 3976: 2018 mechanical test 16500/- and chemical test 11350 /- , For 3976 :2018 amendment no1:2021 AND amendment no.2: 2024 - Mechanical test 16500/ and chemical test 23450/-
7.1(Resistance to fuel)	-	For 3976: 2018 mechanical test 16500/- and chemical test 11350 /- , For 3976 :2018 amendment no1:2021 AND amendment no.2: 2024 - Mechanical test 16500/ and chemical test 23450/-
7.2(Resistance to electricity)	-	For 3976: 2018 mechanical test 16500/- and chemical test 11350 /- , For 3976 :2018 amendment no1:2021 AND amendment no.2: 2024 - Mechanical test 16500/ and chemical test 23450/-
9, 9.1(BIS CERTIFICATION MARKING)	-	For 3976: 2018 mechanical test 16500/- and chemical test 11350 /- , For 3976 :2018 amendment no1:2021 AND amendment no.2: 2024 - Mechanical test 16500/ and chemical test 23450/-
Cl. 8 (IS 17011, Table-1 (i))(Allergenic and carcinogenic disperse dyes)	-	For 3976: 2018 mechanical test 16500/- and chemical test 11350 /- , For 3976 :2018 amendment no1:2021 AND amendment no.2: 2024 - Mechanical test 16500/ and chemical test 23450/-
Cl-8 (IS 17011, Table-1 (ii)(Aromatic amines released from Azo dyes (each individual amine))	-	For 3976: 2018 mechanical test 16500/- and chemical test 11350 /- , For 3976 :2018 amendment no1:2021 AND amendment no.2: 2024 - Mechanical test 16500/ and chemical test 23450/-
Cl-8 (IS 17011, Table-1 (iii)(Aromatic amines released from Azo dyes (each individual amine))	-	For 3976: 2018 mechanical test 16500/- and chemical test 11350 /- , For 3976 :2018 amendment no1:2021 AND amendment no.2: 2024 - Mechanical test 16500/ and chemical test 23450/-
Cl-8(IS 17011, Table-1 (iv)(Chromium (VI))	-	For 3976: 2018 mechanical test 16500/- and chemical test 11350 /- , For 3976 :2018 amendment no1:2021 AND amendment no.2: 2024 - Mechanical test 16500/ and chemical test 23450/-
Cl-8 (IS 17011, Table-1 (v)(Dimethyl fumarate (DMFU))	-	For 3976: 2018 mechanical test 16500/- and chemical test 11350 /- , For 3976 :2018 amendment no1:2021 AND amendment no.2: 2024 - Mechanical test 16500/ and chemical test 23450/-
Cl-8 (IS 17011, Table-1 (vi)(Formaldehyde (free or released by partial hydrolysis))	-	For 3976: 2018 mechanical test 16500/- and chemical test 11350 /- , For 3976 :2018 amendment no1:2021 AND amendment no.2: 2024 - Mechanical test 16500/ and chemical test 23450/-
Cl-8 (IS 17011, Table-1 (vii)(Formaldehyde)	-	For 3976: 2018 mechanical test 16500/- and chemical test 11350 /- , For 3976 :2018 amendment no1:2021 AND amendment no.2: 2024 - Mechanical test 16500/ and chemical test 23450/-
Cl-8(IS 17011, Table-1 (viii)(Organotin compounds)	-	For 3976: 2018 mechanical test 16500/- and chemical test 11350 /- , For 3976 :2018 amendment no1:2021 AND amendment no.2: 2024 - Mechanical test 16500/ and chemical test 23450/-
Cl-8 (IS 17011, Table-1 (ix)(PCP-TeCP-TriCP polychlorophenols)	-	For 3976: 2018 mechanical test 16500/- and chemical test 11350 /- , For 3976 :2018 amendment no1:2021 AND amendment no.2: 2024 - Mechanical test 16500/ and chemical test 23450/-
Cl-8 (IS 17011, Table-1 (x)(pH)	-	For 3976: 2018 mechanical test 16500/- and chemical test 11350 /- , For 3976 :2018 amendment no1:2021 AND amendment no.2: 2024 - Mechanical test 16500/ and chemical test 23450/-
Cl-8 (IS 17011, Table-1 (xi)(Phthalates (each individual phthalate))	-	For 3976: 2018 mechanical test 16500/- and chemical test 11350 /- , For 3976 :2018 amendment no1:2021 AND amendment no.2: 2024 - Mechanical test 16500/ and chemical test 23450/-
Cl-8 (IS 17011, Table-1 (xii)(Nickel, on skin contact)	-	For 3976: 2018 mechanical test 16500/- and chemical test 11350 /- , For 3976 :2018 amendment no1:2021 AND amendment no.2: 2024 - Mechanical test 16500/ and chemical test 23450/-
Cl- 5.2.8.1 (Amendment No. 2)(General)	-	For 3976: 2018 mechanical test 16500/- and chemical test 11350 /- , For 3976 :2018 amendment no1:2021 AND amendment no.2: 2024 - Mechanical test 16500/ and chemical test 23450/-
Cl- 5.2.8.2 (Amendment No. 2)(Internal length of toecap)	-	For 3976: 2018 mechanical test 16500/- and chemical test 11350 /- , For 3976 :2018 amendment no1:2021 AND amendment no.2: 2024 - Mechanical test 16500/ and chemical test 23450/-
Cl- 5.2.8.3 (Amendment No. 2)(Corrosion resistance)	-	For 3976: 2018 mechanical test 16500/- and chemical test 11350 /- , For 3976 :2018 amendment no1:2021 AND amendment no.2: 2024 - Mechanical test 16500/ and chemical test 23450/-
Cl- 5.2.9.5 (Amendment No. 2)(Breaking load and tag retention)	-	For 3976: 2018 mechanical test 16500/- and chemical test 11350 /- , For 3976 :2018 amendment no1:2021 AND amendment no.2: 2024 - Mechanical test 16500/ and chemical test 23450/-
Cl- 5.2.9.6.1 (Amendment No. 2)(Abrasion resistance- Lace to lace)	-	For 3976: 2018 mechanical test 16500/- and chemical test 11350 /- , For 3976 :2018 amendment no1:2021 AND amendment no.2: 2024 - Mechanical test 16500/ and chemical test 23450/-
Cl- 5.2.9.6.2 (Amendment No. 2)(Abrasion resistance- Lace to eyelet)	-	For 3976: 2018 mechanical test 16500/- and chemical test 11350 /- , For 3976 :2018 amendment no1:2021 AND amendment no.2: 2024 - Mechanical test 16500/ and chemical test 23450/-
Cl- 5.2.10 (Amendment No. 2)(Force required to pull out the eyelets)	-	For 3976: 2018 mechanical test 16500/- and chemical test 11350 /- , For 3976 :2018 amendment no1:2021 AND amendment no.2: 2024 - Mechanical test 16500/ and chemical test 23450/-
Cl- 5.2.12.1 (Amendment No. 2)(Insole- Material and thickness)	-	For 3976: 2018 mechanical test 16500/- and chemical test 11350 /- , For 3976 :2018 amendment no1:2021 AND amendment no.2: 2024 - Mechanical test 16500/ and chemical test 23450/-
Cl- 5.2.12.2 (Amendment No. 2)(Insole- Abrasion resistance)	-	For 3976: 2018 mechanical test 16500/- and chemical test 11350 /- , For 3976 :2018 amendment no1:2021 AND amendment no.2: 2024 - Mechanical test 16500/ and chemical test 23450/-
Cl- 5.2.12.3 (Amendment No. 2)(Insole- Water absorption and desorption)	-	For 3976: 2018 mechanical test 16500/- and chemical test 11350 /- , For 3976 :2018 amendment no1:2021 AND amendment no.2: 2024 - Mechanical test 16500/ and chemical test 23450/-
Cl- 5.2.13.1 (Amendment No. 2)(Insock- Abrasion resistance)	-	For 3976: 2018 mechanical test 16500/- and chemical test 11350 /- , For 3976 :2018 amendment no1:2021 AND amendment no.2: 2024 - Mechanical test 16500/ and chemical test 23450/-
Cl- 5.2.13.2 (Amendment No. 2)(Insock- Water absorption and desorption)	-	For 3976: 2018 mechanical test 16500/- and chemical test 11350 /- , For 3976 :2018 amendment no1:2021 AND amendment no.2: 2024 - Mechanical test 16500/ and chemical test 23450/-

31 May, 2028

-
-

4594

FOOTWEAR DESIGN AND DEVELOPMENT INSTITUTE (FDDI), NOIDA

8112814

IS 5676 (1995)

Moulded solid rubber soles and heels - SpecificatlOn (Second Revision)

7650 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5/5.5- Table1(REQUIREMENTS-Thickness)	-	0	We offer package price of all test for BIS in this specification
5/5.6/5.6.1(REQUIREMENTS-Channel)	-	0	We offer package price of all test for BIS in this specification
5/5.7- Table2(REQUIREMENTS- Physical Requirements- as per IS 3400 (Part 1, Part 2, Part 4, Part 9, Part 10, Part 16))	-	0	We offer package price of all test for BIS in this specification
5/5.3/5.3.1(REQUIREMENTS- Construction)	-	0	We offer package price of all test for BIS in this specification
5/5.5- Table1(REQUIREMENTS-Thickness)	-	0	We offer package price of all test for BIS in this specification
5/5.6/5.6.1(REQUIREMENTS-Channel)	-	0	We offer package price of all test for BIS in this specification
5/5.7- Table2(REQUIREMENTS- Physical Requirements- as per IS 3400 (Part 1, Part 2, Part 4, Part 9, Part 10, Part 16))	-	0	We offer package price of all test for BIS in this specification
6(Marking and packing)	-	0	We offer package price of all test for BIS in this specification
8.1(Test methods)	-	0	We offer package price of all test for BIS in this specification
8.3(Measurement of thickness)	-	0	We offer package price of all test for BIS in this specification
5.5 (Amendment 1)(Thickness)	-	0	We offer package price of all test for BIS in this specification
5.7 Table 2 i) (Amendment 1)(Relative Density)	-	-	-
5.7, Table 2 ii) (Amendment 1)(Hardness, degree, Shore A)	-	-	-
5.7, Table 2 iv) (Amendment 1)(Abrasion Resistance at applied force of 10 N)	-	-	-
5.7, Table 2 v) (Amendment 1)(Tensile strength)	-	-	-
5.7, Table 2 vi) (Amendment 1)(Elongation at break)	-	-	-
5.7, Table 2 vii) (Amendment 1)(Tear strength (average force))	-	-	-
5.7, Table 2 iii) (Amendment 1)(Flexing resistance)	-	-	-

31 May, 2028

-
-

4595

Excel Surveyors Pvt. Ltd., Kolkata

5135906

IS 2062 (2011)

Hot rolled medium and high tensile structural steel - Specification (Seventh Revision)

Grade - E250, E275, E300, E350, E410, E450, E550, E600, E650, Quality - A, BR, B0, C.

4500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 18(Weight)	-	0	Included Chemical, Mechanical Metallography & NDT test. (for dimension the testing charges will be 1000)
Cl 15(Length, Width & Thickness)	-	0	-
Cl 13(Y Groove Cracking Test)	-	0	Exclusion : Y groove cracking test
Cl 12(Sudden Load Applied)	-	700	-
Cl 11.3(Press)	-	0	-
Cl 10.3(UTM)	-	0	-
Cl 7(Workmanship)	-	50	-
Cl 18(Weight)	-	0	-
Cl 15(Length, Width & Thickness)	-	0	-
Cl 13(Y Groove Cracking Test)	-	0	-
Cl 12(Sudden Load Applied)	-	0	-
Cl 11.3(Press)	-	0	-
Cl 10.3(UTM)	-	0	-
Cl 7(Workmanship)	-	0	-
Cl 18(Weight)	-	0	-
Cl 15(Length, Width & Thickness)	-	0	-
Cl 13(Y Groove Cracking Test)	-	0	-
Cl 12(Sudden Load Applied)	-	0	-
Cl 11.3(Press)	-	0	-
Cl 10.3(UTM)	-	0	-
Cl 7(Workmanship)	-	0	-
Clause - 5, 8.1 & 8.2(E650, CARBON +EQUIVELENT )	-	500	(for chemical the testing charges will be 500)
Cl. 15 (Cl. 15 Channel Section: Sweep)	-	0	-
Cl. 15(Cl. 15 Channel Section: Camber)	-	0	-
Cl. 15(Cl. 15 Channel Section: Flatness of Web (Concavity))	-	0	-
Cl. 15(Cl. 15 Channel Section: Flatness of Web (Convexity))	-	0	-
Cl. 15(Cl. 15 Channel Section: Flange Out of Square)	-	0	-
Cl. 15(Cl. 15 Channel Section: Width of Flange)	-	0	-
Cl. 15(Cl. 15 Channel Section: Depth)	-	0	-
Cl. 15(Cl. 15 Square Bar: Out of Square)	-	0	-
Cl. 15(Cl. 15 Square Bar: Side Width: Minimum)	-	0	-
Cl. 15(Cl. 15 Square Bar: Side Width: Maximum)	-	0	-
Cl. 15(Cl. 15 Round Bar: Out of Shape)	-	0	-
Cl. 15(Cl. 15 Round Bar: Diameter Minimum)	-	0	-
Cl. 15(Cl. 15 Round Bar: Diameter Maximum)	-	0	-
Cl. 10.3 (Cl. 10.3 (Elongation %))	-	450	(for Mechanical the testing charges will be 450)
Cl. 10.3 (Cl. 10.3 (Yield Stress))	-	0	-
Cl. 10.3 (Cl. 10.3 (Tensile Strength))	-	0	-
Clause - 5, 8.1 & 8.2(E650, ALUMINIUM)	-	0	-
Clause - 5, 8.1 & 8.2(E650, SILICON)	-	0	-
Clause - 5, 8.1 & 8.2(E650, NITROGEN)	-	0	-
Clause - 5, 8.1 & 8.2(E650 ,MANGANESE)	-	0	-
Clause - 5, 8.1 & 8.2(E650, PHOSPHURS)	-	0	-
Clause - 5, 8.1 & 8.2(E650, SULPHUR)	-	0	-
Clause - 5, 8.1 & 8.2(E650, CARBON)	-	0	-
Clause - 5, 8.1 & 8.2(E600, CARBON +EQUIVELENT )	-	0	-
Clause - 5, 8.1 & 8.2(E600, ALUMINIUM)	-	0	-
Clause - 5, 8.1 & 8.2(E600, SILICON)	-	0	-
Clause - 5, 8.1 & 8.2(E600, NITROGEN)	-	0	-
Clause - 5, 8.1 & 8.2(E600 ,MANGANESE)	-	0	-
Clause - 5, 8.1 & 8.2(E600, PHOSPHURS)	-	0	-
Clause - 5, 8.1 & 8.2(E600, SULPHUR)	-	0	-
Clause - 5, 8.1 & 8.2(E600, CARBON)	-	0	-
Clause - 5, 8.1 & 8.2(E550, CARBON +EQUIVELENT )	-	0	-
Clause - 5, 8.1 & 8.2(E550, ALUMINIUM)	-	0	-
Clause - 5, 8.1 & 8.2(E550, SILICON)	-	0	-
Clause - 5, 8.1 & 8.2(E550, NITROGEN)	-	0	-
Clause - 5, 8.1 & 8.2(E550 ,MANGANESE)	-	0	-
Clause - 5, 8.1 & 8.2(E550, PHOSPHURS)	-	0	-
Clause - 5, 8.1 & 8.2(E550, SULPHUR)	-	0	-
Clause - 5, 8.1 & 8.2(E550, CARBON)	-	0	-
Clause - 5, 8.1 & 8.2(E450, CARBON +EQUIVELENT )	-	0	-
Clause - 5, 8.1 & 8.2(E450, ALUMINIUM)	-	0	-
Clause - 5, 8.1 & 8.2(E450, SILICON)	-	0	-
Clause - 5, 8.1 & 8.2(E450, NITROGEN)	-	0	-
Clause - 5, 8.1 & 8.2(E450 ,MANGANESE)	-	0	-
Clause - 5, 8.1 & 8.2(E450, PHOSPHURS)	-	0	-
Clause - 5, 8.1 & 8.2(E450, SULPHUR)	-	0	-
Clause - 5, 8.1 & 8.2(E450, CARBON)	-	0	-
Clause - 5, 8.1 & 8.2(E410, CARBON +EQUIVELENT )	-	0	-
Clause - 5, 8.1 & 8.2(E410, ALUMINIUM)	-	0	-
Clause - 5, 8.1 & 8.2(E410, SILICON)	-	0	-
Clause - 5, 8.1 & 8.2(E410, NITROGEN)	-	0	-
Clause - 5, 8.1 & 8.2(E410 ,MANGANESE)	-	0	-
Clause - 5, 8.1 & 8.2(E410, PHOSPHURS)	-	0	-
Clause - 5, 8.1 & 8.2(E410, SULPHUR)	-	0	-
Clause - 5, 8.1 & 8.2(E410, CARBON)	-	0	-
Clause - 5, 8.1 & 8.2(E350, CARBON +EQUIVELENT )	-	0	-
Clause - 5, 8.1 & 8.2(E350, ALUMINIUM)	-	0	-
Clause - 5, 8.1 & 8.2(E350, SILICON)	-	0	-
Clause - 5, 8.1 & 8.2(E350, NITROGEN)	-	0	-
Clause - 5, 8.1 & 8.2(E350 ,MANGANESE)	-	0	-
Clause - 5, 8.1 & 8.2(E350, PHOSPHURS)	-	0	-
Clause - 5, 8.1 & 8.2(E350, SULPHUR)	-	0	-
Clause - 5, 8.1 & 8.2(E350, CARBON)	-	0	-
Clause - 5, 8.1 & 8.2(E300, CARBON +EQUIVELENT )	-	0	-
Clause - 5, 8.1 & 8.2(E300, ALUMINIUM)	-	0	-
Clause - 5, 8.1 & 8.2(E300, SILICON)	-	0	-
Clause - 5, 8.1 & 8.2(E300, NITROGEN)	-	0	-
Clause - 5, 8.1 & 8.2(E300 ,MANGANESE)	-	0	-
Clause - 5, 8.1 & 8.2(E300, PHOSPHURS)	-	0	-
Clause - 5, 8.1 & 8.2(E300, SULPHUR)	-	0	-
Clause - 5, 8.1 & 8.2(E300, CARBON)	-	0	-
Clause - 5, 8.1 & 8.2(E275, CARBON +EQUIVELENT )	-	0	-
Clause - 5, 8.1 & 8.2(E275, ALUMINIUM)	-	0	-
Clause - 5, 8.1 & 8.2(E275, SILICON)	-	0	-
Clause - 5, 8.1 & 8.2(E275, NITROGEN)	-	0	-
Clause - 5, 8.1 & 8.2(E275 ,MANGANESE)	-	0	-
Clause - 5, 8.1 & 8.2(E275, PHOSPHURS)	-	0	-
Clause - 5, 8.1 & 8.2(E275, SULPHUR)	-	0	-
Clause - 5, 8.1 & 8.2(E275, CARBON)	-	0	-
Clause - 5, 8.1 & 8.2(E250, CARBON +EQUIVELENT )	-	0	-
Clause - 5, 8.1 & 8.2(E250, ALUMINIUM)	-	0	-
Clause - 5, 8.1 & 8.2(E250, SILICON)	-	0	-
Clause - 5, 8.1 & 8.2(E250, NITROGEN)	-	0	-
Clause - 5, 8.1 & 8.2(E250 ,MANGANESE)	-	0	-
Clause - 5, 8.1 & 8.2(E250, PHOSPHURS)	-	0	-
Clause - 5, 8.1 & 8.2(E250, SULPHUR)	-	0	-
Clause - 5, 8.1 & 8.2(E250, CARBON)	-	0	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Vanadium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Molybdenum- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Chromium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Nickel- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Copper- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Carbon Equivalent- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Nitrogen- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl. 15, 16(Off Centre of Web)	-	0	-
Cl. 15, 16(Flange out of square (I beam))	-	0	-
Cl. 15, 16(Width of flange (I Beam))	-	0	-
Cl. 15, 16(Depth (I Beam))	-	0	-
Cl. 15, 16(Mass (Plate))	-	0	-
Cl. 15, 16(Flange Slope)	-	0	-
Cl. 15, 16(Web Thickness)	-	0	-
Cl. 15, 16(Flange Thickness)	-	0	-
Cl. 15, 16(Out of Square (Flat))	-	50	-
Cl. 15, 16(Width )	-	0	-
Cl. 15, 16(Thickness )	-	0	-
Cl. 15, 16(Sectional Area )	-	0	-
Cl. 15, 16(Camber (Angle))	-	0	-
Cl. 15, 16(Out of Square (Angle))	-	0	-
Cl. 15, 16(Weight)	-	0	-
Cl. 15, 16(Leg Length Difference (Angle))	-	0	-
Cl. 15, 16(Leg Length B (Angle))	-	0	-
Cl. 15, 16(Leg Length A (Angle))	-	0	-
Cl. 15, 16(Toe Radius R2)	-	0	-
Cl. 15, 16(Root Radius R1)	-	0	-
Cl 18(Weight)	-	0	-
Cl 15(Length, Width & Thickness)	-	0	-
Cl 13(Y Groove Cracking Test)	-	0	-
Cl 12(Sudden Load Applied)	-	0	-
Cl 11.3(Press)	-	0	-
Cl 10.3(UTM)	-	0	-
Cl 7(Workmanship)	-	0	-
14.1(Soundness test)	-	800	(for NDT test the testing charges will be 800)
14.2(Grain Size)	-	250	(for Grain size determination the testing charges will be 250)
14.2(Inclusion)	-	250	(for Inclusion determination the testing charges will be 250)
Cl 7(Workmanship)	-	0	-
Cl 10.3(UTM)	-	0	-
Cl 11.3(Press)	-	0	-
Cl 12(Sudden Load Applied)	-	0	-
Cl 13(Y Groove Cracking Test)	-	0	-
Cl 15(Length, Width & Thickness)	-	0	-
Cl 18(Weight)	-	0	-
Clause 8, Table 1, Note 2(Any Instrumental Method/Chemical Method)	-	0	-
Clause 8, Table 1, Note 5(Any Instrumental Method/Chemical Method)	-	0	-
Clause 8, Table 1, Note 5(Any Instrumental Method/Chemical Method)	-	0	-
Clause 8, Table 1, Note 5(By Calculation)	-	0	-
Clause 8, Table 1, Note 6(Any Instrumental Method/Chemical Method)	-	0	-
Clause 8, Table 1, Note 6(By Calculation)	-	0	-
Clause 7(IS 2062)	-	50	-
Clause 11.3(IS 1599)	-	500	-
Clause 12(IS 1757)	-	0	-
Clause 15, Table 4(IS 2062)	-	1000	(for Dimension of any structural steel products the testing charges will be 1000)
16(Tolerance)	-	0	-
20(Marking)	-	50	-
20(MARKING)	-	0	-
8(Micro Alloying elements)	-	0	-
8(Niobium as Nb)	-	0	-
8(Vanadium as V)	-	0	-
8(Titanium as Ti)	-	0	-
10(Tensile Strength-IS:1608(P1)-22)	-	0	-
10(Yield Stress-IS:1608(P1)-22)	-	0	-
10(Elongation on SoA 5.65mm GL)	-	0	-
15(Mass -SOP MT-23)	-	0	-
15(Sectional Area)	-	0	-
15(Dimension -D)	-	0	-
15(Dimension -B)	-	0	-
15(Thickness - t)	-	0	-
15(Thickness - T)	-	0	-
15(Flange Slope)	-	0	-
15(Radius R1)	-	0	-
15(Radius R2)	-	0	-
15(Mass -SOP MT-23)	-	0	-
15(Sectional Area)	-	0	-
15(Dimension -D)	-	0	-
15(Dimension -B)	-	0	-
15(Thickness - t)	-	0	-
15(Thickness - T)	-	0	-
15(Radius R1)	-	0	-
15(Radius R2)	-	0	-
15(Mass -SOP MT-23)	-	0	-
15(Sectional Area)	-	0	-
15(Dimensions AxB)	-	0	-
15(Thickness - t)	-	0	-
15(Radius -R1)	-	0	-
15(Radius -R2)	-	0	-
15(Diameter)	-	0	-
15(Sectional Area)	-	0	-
15(Mass per metre)	-	0	-
15(Mass per metre)	-	0	-
15(Ovality)	-	0	-
15(Side Width)	-	0	-
15(Sectional Area)	-	0	-
15(Mass per metre)	-	0	-
15(Out of Square)	-	0	-
9(Preparation of test sample)	-	0	-
Clause 8, Table 1, Note 2(Aluminium)	-	0	-
Clause 8, Table 1, Note 5(Niobium)	-	0	-
Clause 8, Table 1, Note 5(Titanium)	-	0	-
Clause 8, Table 1, Note 5(Nb+V+Ti)	-	0	-
Clause 8, Table 1, Note 6(Boron)	-	0	-
Clause 8, Table 1, Note 6(Cr+Ni)	-	0	-
Clause 7(Freedom from Defect)	-	0	-
Clause 11.3(Bend Test)	-	0	-
Clause 12(Impact Test)	-	0	-
Clause 15, Table 4(Dimension)	-	0	-
5(General Requirements)	-	0	-
4(MARKING)	-	0	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-

31 Dec, 2026

-
Included w.e.f 04.11.2025 Exclusion: Cl 13 (Y Groove Cracking Test)

4596

EMC Testing and Compliance LLP, Gurugram

8141526

IS 17370 (2023)

p-Xylene - Specification (First Revision)

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-3.1(Description)	-	1000	-
Cl-3.2, Table-1 (i)(Purity, mass percent, Min)	-	2000	-
Cl-3.2, Table-1 (i)(Purity, mass percent, Min)	-	2000	-
Cl-3.2, Table-1 (ii)(m-Xylene, mass percent, Max)	-	2000	-
Cl-3.2, Table-1 (iii)(o-Xylene, mass percent, Max)	-	2000	-
Cl-3.2, Table-1 (iv)(Sulphur, mg/kg, Max)	-	2000	-
Cl-3.2, Table-1 (v)(Toluene, mass percent, Max)	-	2000	-
Cl-3.2, Table-1 (vi)(Ethylbenzene, mass percent, Max)	-	2000	-
Cl-3.2, Table-1 (vii)(Nonaromatic hydrocarbons, mass percent, Max)	-	2000	-
Cl-3.2, Table-1 (viii)(Appearance)	-	2000	-
Cl-3.2, Table-1 (ix)(Color, Pt-Co, Max)	-	2000	-
Cl-4.2(Marking)	-	1000	-

19 Jul, 2027

-
Included w.e.f 21.08.2025

4597

National Test House (NR) - NTH, Ghaziabad

8101304

IS 13893 (1994)

Polyurethane soles semirigid - specification

10000 View breakup
-

Clause No.	Exclusion	Remark
4.3.2(Ageing test)	-	-
4.3(Ross Flex test)	-	-
4.3(Flexural strength )	-	-
4.3(Abrasion Resistance)	-	-
4.3(Elongation at break)	-	-
4.3(Hardness Shore(A))	-	-
4.3(Relative density )	-	-
4.2(Thickness )	-	-
4.2 (Amendment 2)(Thickness)	-	-
4.1(Design)	-	-
5, 5.1, 5.2(Packing And Marking)	-	-
Cl.5, 5.1, 5.2(Packing And Marking)	-	-
4.3.1 Table 1 i) (Amendment 2)(Relative Density)	-	-
4.3.1 Table 1 iii) (Amendment 2)(Abrasion Resistance at applied force of 10 N)	-	-
4.3.1 Table 1 iv) (Amendment 2)(Flexing Resistance, Bennewart method)	-	-
4.3.1 Table 1 v) (Amendment 2)(Hydrolysis Resistance, cut growth after 150000 flexes)	-	-
4.3.1 Table 1 vi) (Amendment 2)(Tensile Strength)	-	-
4.3.1 Table 1 vii) (Amendment 2)(Elongation at break)	-	-
4.3.1 Table 1 viii) (Amendment 2)(Tear Strength (average force))	-	-
4.3.1 Table 1 ii) (Amendment 2)(Hardness, degree, Shore A)	-	-
4.3(Tensile Strength )	-	-

-
Included w.e.f.09.10.2025

4598

Dashmesh Test Lab Private Limited

8186926

IS 302 : Part 2 : Sec 30 (2007)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 30 room heaters (First Revision)

All

14000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.6 (Classification)	-	500	-
Cl.6 (Classification)	-	0	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	500	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7(Marking and Instructions)	-	0	-
Cl.7(Marking and Instructions)	-	0	-
Cl.7(Marking and Instructions)	-	0	-
Cl.7.3(Marking and Instructions)	-	0	-
Cl.7.3(Marking and Instructions)	-	0	-
Cl.7.3(Marking and Instructions)	-	0	-
Cl.7.4(Marking and Instructions)	-	0	-
Cl.7.5(Marking and Instructions)	-	0	-
Cl.7.6 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.8 of IS :302-1:2008(Marking and Instructions)	-	0	-
Cl.7.9 of IS :302-1:2008(Marking and Instructions)	-	0	-
Cl.7.10 of IS :302-1:2008(Marking and Instructions)	-	0	-
Cl.7.11 of IS :302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12.1 & IS:302-1:2009(Marking and Instructions)	-	0	-
Cl.7.13 of IS 302-1:2008(Marking and Instructions)	-	0	-
Cl.7.14 of IS302-1:2008(Marking and Instructions)	-	0	-
Cl.7.14(Marking and Instructions)	-	0	-
Cl.7.14(Marking and Instructions)	-	0	-
Cl.7.15 of IS 302-1:2008(Marking and Instructions)	-	0	-
Cl.7.15 of IS 302-1:2008(Marking and Instructions)	-	0	-
Cl.7.15 of IS 302-1:2008(Marking and Instructions)	-	0	-
Cl.7.15 of IS 302-1:2008(Marking and Instructions)	-	0	-
Cl.7.101(Marking and Instructions)	-	0	-
Cl.8 & IS:302-1:2008(Protection Against Access to Live Parts)	-	1000	-
Cl.10 & IS:302-1:2008(Power Input and Current)	-	1000	-
Cl.11 & IS:302-1:2008(Heating)	-	1000	-
Cl.11 & IS:302-1:2008(Heating)	-	0	-
Cl.11 & IS:302-1:2008(Heating)	-	0	-
Cl.11 & IS:302-1:2008(Heating)	-	0	-
Cl.11 & IS:302-1:2008(Heating)	-	0	-
Cl.11 & IS:302-1:2008(Heating)	-	0	-
Cl.11 & IS:302-1:2008(Heating)	-	0	-
Cl.11 & IS:302-1:2008(Heating)	-	0	-
Cl.11 & IS:302-1:2008(Heating)	-	0	-
Cl.11 & IS:302-1:2008(Heating)	-	0	-
Cl.11 & IS:302-1:2008(Heating)	-	0	-
Cl.11 & IS:302-1:2008(Heating)	-	0	-
Cl.11 & IS:302-1:2008(Heating)	-	0	-
Cl.11 & IS:302-1:2008(Heating)	-	0	-
Cl.11 & IS:302-1:2008(Heating)	-	0	-
Cl.11 & IS:302-1:2008(Heating)	-	0	-
Cl.11.8(Heating)	-	0	-
Cl.11.8(Heating)	-	0	-
Cl.11.8(Heating)	-	0	-
Cl.13 & IS:302-1:2008(Leakage Current & Electric Strength at operating temp. )	-	1000	-
Cl.13 & IS:302-1:2008(Leakage Current & Electric Strength at operating temp. )	-	0	-
Cl.14 & IS:302-1:2008(Transient Over Voltages)	-	1000	-
Cl.15 & IS: 302-1:2008(Moisture Resistance )	-	1000	-
Cl.15.3 of IS 302-1:200(Moisture Resistance )	-	0	-
Cl.16 & IS:302-1:2008(Leakage Current & Electric Strength )	-	1000	-
Cl.16 & IS:302-1:2008(Leakage Current & Electric Strength )	-	0	-
Cl.17 & IS:302-1:2008(Over load Protection of Transformers and Associated Circuits )	-	0	-
Cl.18 (Endurance. )	-	1000	-
Cl.19 & IS:302-1:2008(Abnormal Operation.)	-	1000	-
Cl.19 & IS:302-1:2008(Abnormal Operation.)	-	0	-
Cl.19 & IS:302-1:2008(Abnormal Operation.)	-	0	-
Cl.19 & IS:302-1:2008(Abnormal Operation.)	-	0	-
Cl.19.101(Abnormal Operation.)	-	0	-
Cl.19.102(Abnormal Operation.)	-	0	-
Cl.19.103(Abnormal Operation.)	-	0	-
Cl.19.104(Abnormal Operation.)	-	0	-
Cl.19.105(Abnormal Operation.)	-	0	-
Cl.19.106(Abnormal Operation.)	-	0	-
Table 8 of IS 302-1:2008(Abnormal Operation.)	-	0	-
Cl.19.107(Abnormal Operation.)	-	0	-
Cl.19.108(Abnormal Operation.)	-	0	-
Cl.19.109(Abnormal Operation.)	-	0	-
Cl.19.110(Abnormal Operation.)	-	0	-
Cl.19.111(Abnormal Operation.)	-	0	-
Cl.19.112(Abnormal Operation.)	-	0	-
Cl.19.113(Abnormal Operation.)	-	0	-
Cl.19.114(Abnormal Operation.)	-	0	-
Cl.20 & IS:302-1:2008(Stability & Mechanical Hazards)	-	1000	-
Cl.21 & IS:302-1:2008)(Mechanical Strength.)	-	0	-
Cl.21.2 of IS 302-1:2008(Mechanical Strength.)	-	0	-
Cl.21.101 (Mechanical Strength.)	-	0	-
Cl.21.102(Mechanical Strength.)	-	0	-
Cl.21.103(Mechanical Strength.)	-	0	-
Cl.22.1 of IS 302-1:2008(Construction)	-	1000	-
Cl.22.5 of IS 302-1:2008(Construction)	-	0	-
Cl.22.6 of IS 302-1:2008(Construction)	-	0	-
Cl.22.7 of IS 302-1:2008(Construction)	-	0	-
Cl.22.8 of IS 302-1:2008(Construction)	-	0	-
Cl.22.9 of IS 302-1:2008(Construction)	-	0	-
Cl.22.11(Construction)	-	0	-
Cl.22.12 of IS 302-1:2008(Construction)	-	0	-
Cl.22.13 of IS 302-1:2008(Construction)	-	0	-
Cl.22.14 of IS 302-1:2008(Construction)	-	0	-
Cl.22.15 of IS 302-1:2008(Construction)	-	0	-
Cl.22.18 of IS 302-1:2008(Construction)	-	0	-
Cl.22.20 of IS 302-1:2008(Construction)	-	0	-
Cl.22.21 of IS 302-1:2008(Construction)	-	0	-
Cl.23 & IS:302-1:2008(Internal Wiring )	-	1000	-
Cl.23.4 & Cl.29 of 302-1:2008(Internal Wiring )	-	0	-
Cl.23.5 of 302-1:2008(Internal Wiring )	-	0	-
Cl.23.7 of 302-1:2008(Internal Wiring )	-	0	-
C.23.7 of 302-1:2008(Internal Wiring )	-	0	-
Cl.24.1 of 302-1:2008(Component)	-	0	-
Cl.24.1 of 302-1:2008(Component)	-	0	-
Cl.24.1.3 (Component)	-	0	-
Cl.24.1.3 (Component)	-	0	-
Cl.24.1.3 (Component)	-	0	-
Cl.24.1.3 (Component)	-	0	-
C.24.1.4(Component)	-	0	-
C.24.2 of 302-1:2008(Component)	-	0	-
Cl.24.10(Component)	-	0	-
Cl.25.1 of 302-1:2008(Supply Connection and External Flexible Cords )	-	1000	-
Cl. 25.2 of IS 3021:2008(Supply Connection and External Flexible Cords )	-	0	-
Cl. 25.3 of IS 302-1:2008(Supply Connection and External Flexible Cords )	-	0	-
Cl. 25.4 of IS 302-1:2008(Supply Connection and External Flexible Cords )	-	0	-
Cl.25.5 of 302-1:2008(Supply Connection and External Flexible Cords )	-	0	-
Cl.25.6 of 302-1:2008(Supply Connection and External Flexible Cords )	-	0	-
Cl.25.7.(Supply Connection and External Flexible Cords )	-	0	-
Cl.25.8(Supply Connection and External Flexible Cords )	-	0	-
Cl. 25.9(Supply Connection and External Flexible Cords )	-	0	-
Cl.25.10 of 302-1:2008(Supply Connection and External Flexible Cords )	-	0	-
Cl. 25.11(Supply Connection and External Flexible Cords )	-	0	-
Cl. 25.12(Supply Connection and External Flexible Cords )	-	0	-
Cl. 25.13(Supply Connection and External Flexible Cords )	-	0	-
Cl.25.14 of IS 302-1:2008(Supply Connection and External Flexible Cords )	-	0	-
Cl.25.15 of IS 302-1:2008(Supply Connection and External Flexible Cords )	-	0	-
Cl.25.15 of IS 302-1:2008(Supply Connection and External Flexible Cords )	-	0	-
Cl.25.17 of IS 302-1:2008(Supply Connection and External Flexible Cords )	-	0	-
Cl.25.18(Supply Connection and External Flexible Cords )	-	0	-
Cl.25.20(Supply Connection and External Flexible Cords )	-	0	-
Cl.26.1 of IS 302-1:2008(Terminal for External Conductors )	-	1000	-
Cl.26.10 of IS 302-1:2008(Terminal for External Conductors )	-	0	-
Cl.26.11 of IS 302-1:2008(Terminal for External Conductors )	-	0	-
Cl.27.1 of 302-1:2008(Provision for Earthing.)	-	1000	-
Cl.27.5 of 302-1:2008(Provision for Earthing.)	-	0	-
Cl.28 of 302-1:2008(Screws and Connections.)	-	1000	-
Cl.29 & IS:302-1:2008(Clearances, Creepage Distances and Solid Insulation)	-	1000	-
Cl.29 & IS:302-1:2008(Clearances, Creepage Distances and Solid Insulation)	-	0	-
Cl.30 & IS:302-1:2008(Resistance to Heat and Fire)	-	1000	-
Cl.30.2.2 of 302-1:2008(Resistance to Heat and Fire)	-	0	-
Cl.31 & IS:302-1:2008(Resistance to Rusting.)	-	1000	-
Cl.32 & IS:302-1:2008(Radition,Toxicity and similar Hazards.)	-	0	-
Cl.31 of IS:302-1:2008(Resistance to Rusting.)	-	0	-
Cl.30.2 of 302-1:2008(Resistance to Heat and Fire : Resistance to fire)	-	0	-
Cl.30.1 of IS:302-1:2008(Resistance to Heat and Fire: Resistance to heat. )	-	0	-
Cl.29.2 of IS:302-1:2008(Clearances, Creepage Distances and Solid Insulation : Creepage Distance)	-	0	-
Cl.29.1 of IS:302-1:2008(Clearances, Creepage Distances and Solid Insulation : Clearance )	-	0	-
Cl.28 of 302-1:2008(Screws and Connections.)	-	0	-
Cl.27.5 of 302-1:2008(Provision for Earthing : ECR)	-	0	-
Cl.27.1 of 302-1:2008(Provision for Earthing )	-	0	-
Cl.26 of IS 302-1:2008(Terminal for External Conductors )	-	0	-
Cl.25.20 of 302-1:2008(Supply Connection and External Flexible Cords : Additional insulation )	-	0	-
Cl.25.18 of 302-1:2008(Supply Connection and External Flexible Cords : Arrangement of cord anchorages )	-	0	-
Cl.25.15 of IS 302-1:2008(Supply Connection and External Flexible Cords : Cord grip test - displacement)	-	0	-
Cl.25.15 of IS 302-1:2008(Supply Connection and External Flexible Cords : Cord grip test - strain at terminals )	-	0	-
Cl. 25.13 of 302-1:2008(Supply Connection and External Flexible Cords : Inlet opening of supply cords )	-	0	-
Cl. 25.12 of 302-1:2008(Supply Connection and External Flexible Cords : Moulding of cords )	-	0	-
Cl.25.10 of 302-1:2008(Supply Connection and External Flexible Cords : Colour of earthing wire )	-	0	-
Cl. 25.9 of 302-1:2008(Supply Connection and External Flexible Cords : Contact with sharp edge )	-	0	-
Cl.25.8 of 302-1:2008(Supply Connection and External Flexible Cords : Resistance of supply wires )	-	0	-
Cl.25.7 of IS:302-2-30:2007(Supply Connection and External Flexible Cords : Supply cords material )	-	0	-
Cl.25.5 of 302-1:2008(Supply Connection and External Flexible Cords : Type of attachments )	-	0	-
Cl.25.1 of 302-1:2008(Supply Connection and External Flexible Cords : Means of connection )	-	0	-
Cl.24 of IS:302-2-30:2007(Component)	-	0	-
Cl.23.7 of 302-1:2008(Internal Wiring : Colour of earting conductor )	-	0	-
Cl.23 of IS:302-1:2008(Internal Wiring )	-	0	-
Cl.22.106 of IS:302-2-30:2007(Construction : Checking of thermostats, timers or similar means for visibl glowing radiant heaters)	-	0	-
Cl.22.106 of IS:302-2-30:2007(Construction : Checking of openings on the underside)	-	0	-
Cl.22.102 & Cl 22.103 of IS:302-2-30:2007(Construction : Fireguard )	-	0	-
Cl.22.101 of IS:302-2-30:2007(Construction : Prevention to contact with heating element)	-	0	-
Cl.22.24 of IS:302-2-30:2007(Construction : test of bare heating element)	-	0	-
Cl.22.18 of IS 302-1:2008(Construction : Resistance to corrosion )	-	0	-
Cl.22.15 of IS 302-1:2008(Construction : Storage hooks for flexible cords)	-	0	-
Cl.22.14 of IS 302-1:2008(Construction : ragged and sharp edges)	-	0	-
Cl.22.13 of IS 302-1:2008(Construction : Position of handles )	-	0	-
Cl.22.12 of IS 302-1:2008(Construction : Fixing of Handle, knobs,grips,lever and similer parts )	-	0	-
Cl.22.11 of IS 302-1:2008(Construction : Fixing of non detachable parts )	-	0	-
Cl.22.7 of IS:302-2-30:2007(Construction : Pressure test of oil heater )	-	0	-
Cl.21.101 of IS:302-2-30:2007(Mechanical Strength : fire gaurd deformation test )	-	0	-
Cl.21.2 of IS 302-1:2008(Mechanical Strength : Pentration by sharp implementation )	-	0	-
Cl.21.1 of IS:302-1:2008)(Mechanical Strength : Rough handling )	-	0	-
Cl.20 of IS:302-2-30:2007(Stability of Mechanical Hazards)	-	0	-
Cl.19.114 of IS:302-2-30:2007(Abnormal Operation : the temp. of the surface of the container for oil heaters )	-	0	-
Cl.19.112 of IS:302-2-30:2007(Abnormal Operation : Ignition of bleached cotton gauge)	-	0	-
Cl.19.111 of IS:302-2-30:2007(Abnormal Operation : Ignition of flannelette for Visibly glowing heaters)	-	0	-
Cl.19.110 of IS:302-2-30:2007(Abnormal Operation : operation against wall for visibly glowing radiant heaters )	-	0	-
Cl.19.109 of IS:302-2-30:2007(Abnormal Operation : operation against wall for fan heater )	-	0	-
Cl.19.106 of IS:302-2-30:2007(Abnormal Operation : Locked rotor of fan hetear )	-	0	-
Cl.19.103 , Cl 19.104 of IS:302-2-30:2007(Abnormal Operation : Operation after Covering by cotton)	-	0	-
Cl.19 of IS:302-2-30:2007(Abnormal Operation : High Voltage )	-	0	-
Cl.19 of IS:302-2-30:2007(Abnormal Operation : temp rise of supply cord )	-	0	-
Cl.19 of IS:302-2-30:2007(Abnormal Operation : Temp rise of test corner )	-	0	-
Cl.19 of IS:302-1:2008(Abnormal Operation : Emission of molten or poisonous or ignitable gas)	-	0	-
Cl.16 of IS:302-1:2008(Leakage current and Electric strength (After humidity): Electric Strentgh )	-	0	-
Cl.16 of IS:302-1:2008(Leakage current and Electric strength (After humidity): Leakage current )	-	0	-
Cl.15 of IS 302-1:2008(Moisture Resistance )	-	0	-
Cl.14 of IS:302-1:2008(Transient Over Voltages)	-	0	-
Cl.13 of IS:302-1:2008(Leakage Current of Electric Strength at operating temp. )	-	0	-
Cl.13 of IS:302-1:2008(Leakage Current of Electric Strength at operating temp. )	-	0	-
Cl.11 of IS:302-2:30: 2007(Heating : Room temperature)	-	0	-
Cl.11.8 of IS:302-2:30: 2007(Heating : For liquid filled radiators the temp. rise of the outer surface of the liquid container)	-	0	-
Cl.11 of IS:302-2:30: 2007(Heating : Temperature rise in winding)	-	0	-
Cl.11 of IS:302-2:30: 2007(Heating : Air-outlet grills)	-	0	-
Cl.11 of IS:302-2:30: 2007(Heating : Surfaces of handles, knobs, grips and similar parts)	-	0	-
Cl.11 of IS:302-2:30: 2007(Heating : Wooden supports, walls, ceiling and floor of the test corner)	-	0	-
Cl.11 of IS:302-2:30: 2007(Heating : PVC Insulation )	-	0	-
Cl.10 of IS:302-1:2008(Power Input and Current)	-	0	-
Cl.8 of IS:302-1:2008(Protection Against Access to Live Parts)	-	0	-
Cl.7.101 of IS:302-2:30: 2007(Marking and Instructions : standard mark. )	-	0	-
Cl.7.15 of IS 302-1:2008(Marking and Instructions : Visibility of marking concerning covering)	-	0	-
Cl.7.15 of IS 302-1:2008(Marking and Instructions : discernibility from the out side )	-	0	-
Cl.7.14 of IS:302-2:30: 2007(Marking and Instructions : Height of “Do not cover”)	-	0	-
Cl.7.14 of IS:302-2:30: 2007(Marking and Instructions : height of symbol)	-	0	-
Cl.7.14 of IS302-1:2008(Marking and Instructions : Legibility and durability )	-	0	-
Cl.7.13 of IS 302-1:2008(Marking and Instructions : Languge of instruction and texts )	-	0	-
Cl.7.11 of IS :302-1:2008(Marking and Instructions : Controls )	-	0	-
Cl.7.9 of IS :302-1:2008(Marking and Instructions : switches )	-	0	-
Cl.7.8 of IS :302-1:2008(Marking and Instructions : terminals )	-	0	-
Cl.7.6 of IS:302-1:2008(Marking and Instructions : Symbols )	-	0	-
Cl.7.5 of IS:302-1:2008(Marking and Instructions : upper of lower limit of the rated power input )	-	0	-
Cl 7.1 & Cl.7.6 of IS:302-2:30: 2007(Marking and Instructions : Do not cover )	-	0	-
Cl.7.1 of IS:302-1:2008(Marking and Instructions : Country of manufacture )	-	0	-
Cl.7.1 of IS:302-1:2008(Marking and Instructions : Symbol for Class-II )	-	0	-
Cl.7.1 of IS:302-1:2008(Marking and Instructions : Model or type )	-	0	-
Cl.7.1 of IS:302-1:2008(Marking and Instructions : Name , trade-mark or identification mark of the manufacturer )	-	0	-
Cl.7.1 of IS:302-1:2008(Marking and Instructions : rated power input )	-	0	-
Cl.7.1 of IS:302-1:2008(Marking and Instructions : Nature of supply )	-	0	-
Cl.7.1 of IS:302-1:2008(Marking and Instructions : Rated Voltage )	-	0	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	0	-

22 Jul, 2028

-
Included w.e.f.01.10.2025 Exclusion Cl 19.11.4.1 to Cl 19.11.4.7 EMI/EMC

4599

Electrical Research and Development Association, gujurat

7101125

IS/IEC 61727 (2004)

Photovoltaic PV Systems ” Characteristics of the Utility Interface

Upto 250 kVA

618000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Utility compatibility)	-	130000	0.1 kW to 20 kW=65000/- 20.1 kW to 50 kW= 78800/- 50.1 kW to 125 kW= 102100/- 125.1 kW to 250 kW= 130000/-
5(Personnel safety and equipment protection)	-	488000	0.1 kW to 20 kW=175000/- 20.1 kW to 50 kW=248400/- 50.1 kW to 125 kW= 342300/- 125.1 kW to 250 kW= 488000/-
4(Utility compatibility)	-	-	-
5(Personnel safety and equipment protection)	-	-	-

30 Nov, 2028

-
Included w.e.f 04.09.2025

4600

National Test House (NR) - NTH, Ghaziabad

8101304

IS 6664 (1992)

Rubber microcellular sheets for soles and heels - Specification (First Revision)

15000 View breakup
-

Clause No.	Exclusion	Remark
4.2(Flexing resistance )	-	-
4.2(Water absorption)	-	-
4.2(Heat Shrinkage )	-	-
4.2(Shrinkage at room temp)	-	-
4.2(Split tear strength)	-	-
4.2(Compression set)	-	-
4.2(Hardness (Shore A))	-	-
4.2(Density )	-	-
4.2(Size & Thickness )	-	-
4, Cl.4.1,4.1.1,4.1.2(Requirements)	-	-
Cl.4 Cl.4.1.3 And 8.3,Table1, i)(Relative density)	-	-
Cl.4.1.3 And 8.3,Table1, iii)(Hardness, Shore A durometer min)	-	-
Cl.4 Cl.4.1.3 And 8.3,Table1, iii)(Change in Hardness after ageing at 100±1°C for 24hr)	-	-
Cl.4 Cl.4.1.3 And 8.3,Table1, iv)(Compression set at constant stress percent, Max)	-	-
Cl.4 Cl.4.1.3 And 8.3,Table1, v)(Split tear strength, kg,Min)	-	-
Cl.4 Cl.4.1.3 And 8.3,Table1, vi)(Room Temperature shrinkage at 27±2°C for 2weeks, percent, Max)	-	-
Cl.4 Cl.4.1.3 And 8.3,Table 1, vi)(Heat shrinkage test at 100±1°C for 1 hour max)	-	-
Cl.4 Cl.4.1.3 And 8.3,Table1, viii)(Water absorption , percent by mass, Max)	-	-
Cl.4 Cl.4.1.3 And 8.3,Table 1, viii)(Flexing resistance: Maximum cut growth at 50 000 cycles)	-	-
5, 5.1(Marking)	-	-
6, 6.1(Packing)	-	-
"Cl.4 ,Cl.4.1,4.1.1,4.1.2(Requirements ")	-	-
Cl.4.1.3 And 8.3,Table1(i) Relative density)	-	-
Cl.4.1.3 And 8.3,Table1(ii) Hardness, Shore A durometer min)	-	-
Cl.4.1.3 And 8.3,Table1(iii) Change in Hardness after ageing at 100±1°C for 24hr)	-	-
Cl.4.1.3 And 8.3,Table1(iv) Compression set at constant stress percent, Max)	-	-
Cl.4.1.3 And 8.3,Table1(vi) Room Temperature shrinkage at 27±2°C for 2weeks, percent, Max)	-	-
Cl.4.1.3 And 8.3,Table 1 vi(Heat shrinkage test at 100±1°C for 1 hour max)	-	-
Cl.4.1.3 And 8.3,Table1(viii)Water absorption , percent by mass, Max)	-	-
Cl.4.1.3 And 8.3,Table1(ix)Flexing resistance)	-	-
5, 5.1(Marking)	-	-
6, 6.1(Packing)	-	-
Cl.4.1.3 and 8.3,Table 1 ii(Thickness)	-	-
Cl.4.1.3 and 8.3,Table 1 vii(Abrasion resistance at applied force of 5 N)	-	-

-
Included w.e.f.09.10.2025

4601

RAMCO INDUSTRIES LIMITED (MATERIAL TESTING LABORATORY)

6198036

IS 14862 (2000)

Fibre cement flat sheets - specification

Type A & B

189000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.2.2(Apparent Density)	-	5000	-
6.1(For TypeA sheets - Bending Strength)	-	5000	-
6.3(For TypeA sheets - Frost Resistance)	-	50000	-
6.6( Heat-Rain)	-	50000	-
5.1.1(Nominal Length )	-	500	-
5.1.1(Nominal Width)	-	500	-
6.5(For TypeA sheets - Soak-Dry)	-	30000	-
5.1.4.2(Squareness of edges)	-	500	-
5.1.4.1(Straightness of edges - Length )	-	500	-
5.1.4.1(Straightness of edges - Width )	-	500	-
5.1.2(Thickness)	-	500	-
6.4(For TypeA sheets - Warm Water)	-	30000	-
6.2(For TypeA sheets - Water Impermeability)	-	10000	-
4.1(CLASSIFICATION)	-	500	-
4.2(CLASSIFICATION -The sheets are further classified into five categories)	-	500	-
5.2.1(Bending Strength)	-	5000	-

-
-

4602

Samridhi Test House Pvt. Ltd.

8184706

IS 15801 (2008)

Polypropylene - Random copolymer pipes for hot and cold water supplies - Specification

All

62000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 4( Designation)	-	200	-
Cl 7(Dimensions Of Pipes)	-	500	-
Cl 8(Visual Appearance)	-	300	-
Cl 9.1(Hydraulic Characteristics)	-	4500	-
Cl 9.2(Fusion Compatibility)	-	3000	-
Cl 9.3(Reversion Test )	-	650	-
Cl 9.4 & Annex B(Impact Strength)	-	900	-
Cl 9.5(Density)	-	500	-
Cl 9.6(Melt Flow Rate)	-	1000	-
Cl 9.7(Carbon Black Content & Dispersion)	-	1500	-
Cl 9.8(Thermal Stability By Hydrostatic Pressure Testing)	-	40000	-
Cl 9.9(Opacity)	-	600	-
5(Colour)	-	250	-

-
Included w.e.f 11.09.2025

4603

EMC Testing and Compliance LLP, Gurugram

8141526

IS 12068 (1987)

Specification for rice bran fatty acids

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1/3.1.1/3.2(Description - IS 12068:1987)	-	500	-
3.3, 6.1 Table 1 (i)(Moisture - IS 548 (Part 1/Sec 2) : 2021)	-	2000	-
3.3, 6.1 Table 1 (ii)(Saponification - IS 548 (Part 1/Sec 2) : 2021)	-	2000	-
3.3, 6.1 Table 1 (iii)(Acid value - IS 548 (Part 1/Sec 2) : 2021)	-	2000	-
3.3, 6.1 Table 1 (iv)(Iodine Value - IS 548 (Part 1/Sec 2) : 2021)	-	2000	-
3.3, 6.1 Table 1 (v)(Mineral Acidity - IS 12068:1987)	-	2000	-
3.3, 6.1 Table 1 (vi)(Ash - IS 12068:1987)	-	2000	-
3.3, 6.1 Table 1 (vii)(Unsaponifiable matter - IS 548 (Part 1/Sec 2) : 2021)	-	2000	-
3.3, 6.1 Table 1 (viii)(Titre - IS 548 (Part 1/Sec 2) : 2021)	-	2000	-
3.3, 6.1 Table 1 (ix)(Colour)	-	2000	-
3.3, 6.1 Table 1 (x)(Flash Point - IS 1448 (P-21))	-	2000	-

19 Jul, 2027

-
Included w.e.f 16.09.2025

4604

Dashmesh Test Lab Private Limited

8186926

IS 302 : Part 2 : Sec 59 (1999)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 59 insect killers

All

30000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 32 302-2-59 : 1999(Radiation Hazards)	-	1000	-
Cl. 31 302-2-59 : 1999(Resistance to Rusting)	-	1000	-
Cl. 30 302-2-59 : 1999(Resistance to Heat Fire & Tracking )	-	10000	-
Cl. 29 302-2-59 : 1999(Clearances, Creepage Distances & Solid insulation )	-	1000	-
Cl. 28 302-2-59 : 1999(Screws & Connections)	-	1000	-
Cl. 27 302-2-59 : 1999(Provision for Earthing )	-	1000	-
Cl. 26 302-2-59 : 1999(Terminals for External conductors )	-	1000	-
Cl. 25 302-2-59 : 1999(Supply Connection & External Flexible Cords)	-	1000	-
Cl. 24 302-2-59 : 1999(Components)	-	1000	-
Cl. 23 302-2-59 : 1999(Internal Wiring)	-	1000	-
Cl. 22 302-2-59 : 1999(Construction )	-	1000	-
Cl. 21 302-2-59 : 1999(Mechanical strength)	-	1000	-
Cl. 20 302-2-59 : 1999(Stability & Mechanical Hazards)	-	1000	-
Cl. 19 302-2-59 : 1999(Abnormal Operation )	-	1000	-
Cl. 18 302-2-59 : 1999(Endurance)	-	1000	-
Cl. 16 302-2-59 : 1999(Leakage Current & Electric Strength at Operating Temperature (After Humidity Treatment))	-	1000	-
Cl. 15 302-2-59 : 1999(Moisture Resistance Test )	-	1000	-
Cl. 14 302-2-59 : 1999(Radio and television interference suppression / Transient over voltages)	-	1000	-
Cl. 13 302-2-59 : 1999(Leakage Current & Electric Strength at Operating Temperature)	-	1000	-
Cl. 11 302-2-59 : 1999(Temperature Rise)	-	1000	-
Cl. 10 302-2-59 : 1999(Power Input and Current )	-	1000	-
Cl. 9 302-2-59 : 1999(Starting of motor operated appliances)	-	1000	-
Cl. 8 302-2-59 : 1999(Protection Against Electric Shock )	-	1000	-
Cl. 7 302-2-59 : 1999(Marking)	-	1000	-
(CI. 6 IS 302-2-59 : 1999(Classification )	-	1000	-
Cl. 17 302-2-59 : 1999(Overload Protection of Transformers and Associated Circuit)	-	1000	-

22 Jul, 2028

-
Included w.e.f 28.08.2025 Exclusion: Cl 19.11.4.1 to 19.11.4.7 (EMI/EMC Tests), Cl 15 (Degree of protection IP Tests for IPX3, IPX4, IPX5, IPX6, IPX7)

4605

EMC Testing and Compliance LLP, Gurugram

8141526

IS 12029 (2023)

Acid Oil - Specification (first revision of IS 12029)

12500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Iodine Value)	-	1000	-
4.2 Table 1 (i)(Total Fatty Matter (TFM) - IS 286 : 2018)	-	2000	-
4.2 Table 1 (ii)(Moisture and volatile matter - IS 286 : 2018)	-	2000	-
4.2 Table 1 (iii)(Free fatty Acid - IS 548 (Part 1/Sec 2) : 2021)	-	2000	-
4.2 Table 1 (iv)(Free Mineral Acid ( As H₂SO₄) - IS 12029:2023)	-	1000	-
4.2 Table 1 (v)(Unsaponifiable matter - IS 548 (Part 1/Sec 2) : 2021)	-	1000	-
4.2 Table 1 (vi)(Oxidized Fatty Acid - IS 12029:2023)	-	2000	-
4.2 Table 1 (vii)(Iron - IS 12029:2023)	-	1500	-
4.2 Table 1 (viii)(Ash - IS 12029:2023)	-	2000	-

19 Jul, 2027

-
Included w.e.f 16.09.2025

4606

Rajkot Metlab Services LLP, Rajkot

7183706

IS 15833 (2009)

Stainless Steel Tower Bolts -specification

6780 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 4.2(Carbon Content)	-	500	-
Clause 4.2(Silicon)	-	500	-
Clause 4.2(Manganese)	-	500	-
Clause 4.2(nickel)	-	500	-
Clause 4.2(Chromium)	-	500	-
Clause 4.2(Sulphur)	-	500	-
Clause 4.2(Phosphorus)	-	500	-
Clause 4.2(Carbon Content)	-	500	-
Clause 4.2(Silicon)	-	500	-
Clause 4.2(Manganese)	-	500	-
Clause 4.2(nickel)	-	500	-
Clause 4.2(Chromium)	-	500	-
Clause 4.2(Sulphur)	-	500	-
Clause 4.2(Phosphorus)	-	500	-
Clause 4.2(Mech)(Phosphorus)	-	500	-
Clause 4.2(Mech)(Sulphur)	-	500	-
Clause 4.2(Mech)(Chromium)	-	500	-
Clause 4.2(Mech)(nickel)	-	500	-
Clause 4.2(Mech)(Manganese)	-	500	-
Clause 4.2(Mech)(Silicon)	-	500	-
Clause 4.2(Mech)(Carbon Content)	-	500	-
Cl 7(0)	-	500	-
Cl 6(DIMENSIONS)	-	500	-
Cl 6(DIMENSIONS)	-	500	-
Cl 6(DIMENSIONS)	-	500	-
Cl 6(DIMENSIONS)	-	500	-
Cl 6(DIMENSIONS)	-	500	-
Cl 6(DIMENSIONS)	-	500	-
Cl 6(DIMENSIONS)	-	500	-
Cl 6(DIMENSIONS)	-	500	-
Cl 6(DIMENSIONS)	-	500	-
Cl 6(DIMENSIONS)	-	500	-
Cl 5(MANUFACTURE)	-	500	-
Cl 4(MATERIAL)	-	2500	-
Cl 3(NOMINAL SIZES)	-	500	-
Cl 3(NOMINAL SIZES)	-	500	-
8(Marking)	-	500	-

12 Jan, 2028

-
Included w.e.f.26.08.2025

4607

Ace Test Labs & Metrology Pvt. Ltd., Sonipat

9162826

IS 17550 : Part 3 (2025)

Household Refrigerating Appliances - Characteristics and Methods Of Test Part 3 Energy Consumption and Volume (First Revision)

130000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 4.1, Annex A(set up for energy consumption)	-	25000	-
Clause 4.2, Annex B(Steady state power consumption)	-	25000	-
Clause 4.3, Annex C(Defrost and Recovery Energy and Temperature Change)	-	25000	-
Clause 4.4, Annex D(Defrost Frequency)	-	25000	-
Clause 4.5, Annex E(Number of Test Points and Interpolation)	-	25000	-
Clause 4.6, Annex G(Load Processing Efficiency)	-	25000	-
Clause 4.7, Annex F(Specified Auxiliaries)	-	25000	-
Clause 4.8, Annex H(Volume determination)	-	8000	-
Clause 4.8.1, Annex H(Rated total volume)	-	8000	-
Clause 5, 5.1, 5.2 Table 1(TARGET TEMPERATURES FOR ENERGY DETERMINATION)	-	25000	-
Clause 6, 6.1 to 6.8(DETERMINATION OF ENERGY CONSUMPTION)	-	25000	-
Clause 4.1, Annex A(set up for energy consumption)	-	25000	-
Clause 4.2, Annex B(Steady state power consumption)	-	25000	-
Clause 4.3, Annex C(Defrost and Recovery Energy and Temperature Change)	-	25000	-
Clause 4.4, Annex D(Defrost Frequency)	-	25000	-
Clause 4.5, Annex E(Number of Test Points and Interpolation)	-	25000	-
Clause 4.6, Annex G(Load Processing Efficiency)	-	25000	-
Clause 4.7, Annex F(Specified Auxiliaries)	-	25000	-
Clause 4.8, Annex H(Volume determination)	-	8000	-
Clause 4.8.1, Annex H(Rated total volume)	-	8000	-
Clause 5, 5.1, 5.2 Table 1(TARGET TEMPERATURES FOR ENERGY DETERMINATION)	-	25000	-
Clause 6, 6.1 to 6.8(DETERMINATION OF ENERGY CONSUMPTION)	-	25000	-

14 Nov, 2027

-
Included w.e.f.12.09.2025

4608

EMC Testing and Compliance LLP, Gurugram

8141526

IS 537 (2025)

Toluene — Specification

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-3, 7, Table-1(Toluene, percent by mass, Min)	-	15000	-
Cl-3, 7, Table-1(Appearance)	-	15000	-
Cl-3, 7, Table-1(Colour, platinum-cobalt scale, Max)	-	15000	-
Cl-3, 7, Table-1(Relative density at 15.56 °C/15.56 °C)	-	15000	-
Cl-3, 7, Table-1(Density, 20 °C, g/ml)	-	15000	-
Cl-3, 7, Table-1(Total sulphur, mg/kg, Max)	-	15000	-
Cl-3, 7, Table-1(Distillation Range)	-	15000	-
Cl-3, 7, Table-1(Non-aromatic hydrocarbons, percent by mass, Max)	-	15000	-
Cl-3, 7, Table-1(Benzene content, percent by mass, Max)	-	15000	-
Cl-3, 7, Table-1(Water content, mg/kg, Max)	-	15000	-
Cl-3, 7, Table-1(Acid wash colour)	-	15000	-
Cl-5(Handling)	-	1000	-
Cl-7.1(Quality of Reagents)	-	15000	-

19 Jul, 2027

-
Included w.e.f 21.08.2025

4609

EMC Testing and Compliance LLP, Gurugram

8141526

IS 5149 (2020)

Specification for Maleic Anhydride, Technical ( Second Revision )

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.2.1(Description)	-	12000	-
Cl.2.2, Table-1(i)(Crystallizing point)	-	12000	-
Cl.2.2, Table-1(ii)(Colour of the molten material)	-	12000	-
Cl.2.2, Table-1(iii)(Maleic acid content)	-	12000	-
Cl.2.2, Table-1(iv)(Maleic anhydride content)	-	12000	-
Cl.2.2, Table-1(v)(Ash)	-	12000	-
Cl.2.2, Table-1(vi)(Iron content (as Fe))	-	12000	-

19 Jul, 2027

-
Included w.e.f 16.09.2025

4610

Akshat Test Lab & Calibration Services, Ghaziabad

8186526

IS 14927 : Part 2 : Sec 1 (2023)

Cable trunking systems and cable ducting Systems for electrical installations Part 2-1: particular requirements cable trunking systems and cable Ducting systems intended for mounting on walls and ceilings first revision

Cable trunking systems and cable ducting Systems

22000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.9.1(Sharp edges)	-	500	-
Cl.9.2(Apparatus mounting)	-	500	-
Cl.9.3(Means for protective separation and/or retention)	-	1000	-
Cl.9.4(Mechanical connections)	-	1000	-
Cl.9.5(Accessible conductive parts)	-	1000	-
Cl.9.6(Equipotential bonding)	-	500	-
Cl.9.7(Access to live parts)	-	1000	-
Cl.9.8(Inlet openings)	-	500	-
Cl.9.9(Membranes)	-	500	-
Cl.9.10(Cable restrainer)	-	500	-
Cl.9.11(Cable anchorage)	-	1000	-
Cl. 9.101(Assembling)	-	500	-
Cl.10.1(Linear deflection test)	-	500	-
Cl.10.1(Mechanical strength)	-	500	-
Cl.10.2(Cable support test)	-	500	-
Cl.10.3(Impact test)	-	1000	-
Cl.10.5(External load test)	-	1000	-
Cl.10.6(System access cover retention)	-	1000	-
Cl. 10.101(Compression test for CDS)	-	1000	-
Cl.11.1(Electrical continuity)	-	1000	-
Cl.11.2(Electrical insulation)	-	1000	-
Cl.12(Thermal properties)	-	1500	-
Cl.13(Fire hazard)	-	1500	-
Cl.14(External influences)	-	2000	-
Cl. 15(Electromagnetic compatibility)	-	500	-
Cl. 9.102(Contact between liquids and insulated conductors and live parts)	-	500	For other 22000/- & For BIS 15000/-
Cl.9.1(Sharp edges)	-	0	-
Cl.9.2(Apparatus mounting)	-	0	-
Cl.9.3(Means for protective separation and/or retention)	-	0	-
Cl.9.4(Mechanical connections)	-	0	-
Cl.9.5(Accessible conductive parts)	-	0	-
Cl.9.6(Equipotential bonding)	-	0	-
Cl.9.7(Access to live parts)	-	0	-
Cl.9.8(Inlet openings)	-	0	-
Cl.9.9(Membranes)	-	0	-
Cl.9.10(Cable restrainer)	-	0	-
Cl.9.11(Cable anchorage)	-	0	-
Cl. 9.101(Assembling)	-	0	-
Cl.10.1(Linear deflection test)	-	0	-
Cl.10.1(Mechanical strength)	-	0	-
Cl.10.2(Cable support test)	-	0	-
Cl.10.3(Impact test)	-	0	-
Cl.10.5(External load test)	-	0	-
Cl.10.6(System access cover retention)	-	0	-
Cl. 10.101(Compression test for CDS)	-	0	-
Cl.11.1(Electrical continuity)	-	0	-
Cl.11.2(Electrical insulation)	-	0	-
Cl.12(Thermal properties)	-	0	-
Cl.13(Fire hazard)	-	0	-
Cl.14(External influences)	-	0	-
Cl. 15(Electromagnetic compatibility)	-	0	-
Cl. 9.102(Contact between liquids and insulated conductors and live parts)	-	0	-
Cl.9.1(Sharp edges)	-	0	-
Cl.9.2(Apparatus mounting)	-	0	-
Cl.9.3(Means for protective separation and/or retention)	-	0	-
Cl.9.4(Mechanical connections)	-	0	-
Cl.9.5(Accessible conductive parts)	-	0	-
Cl.9.6(Equipotential bonding)	-	0	-
Cl.9.7(Access to live parts)	-	0	-
Cl.9.8(Inlet openings)	-	0	-
Cl.9.9(Membranes)	-	0	-
Cl.9.10(Cable restrainer)	-	0	-
Cl.9.11(Cable anchorage)	-	0	-
Cl. 9.101(Assembling)	-	0	-
Cl.10.1(Linear deflection test)	-	0	-
Cl.10.1(Mechanical strength)	-	0	-
Cl.10.2(Cable support test)	-	0	-
Cl.10.3(Impact test)	-	0	-
Cl.10.5(External load test)	-	0	-
Cl.10.6(System access cover retention)	-	0	-
Cl. 10.101(Compression test for CDS)	-	0	-
Cl.11.1(Electrical continuity)	-	0	-
Cl.11.2(Electrical insulation)	-	0	-
Cl.12(Thermal properties)	-	0	-
Cl.13(Fire hazard)	-	0	-
Cl.14(External influences)	-	0	-
Cl. 15(Electromagnetic compatibility)	-	0	-
Cl. 9.102(Contact between liquids and insulated conductors and live parts)	-	0	For other 22000/- & For BIS 15000/-

-
Included w.e.f.29.09.2025

4611

Alpha Test House Services LLP (160), Sahibzada Ajit Singh Nagar

9138706

IS 1930 (2003)

Woodworking tools - Chisels and gouges (Third Revision)

All

30000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(Firmer chisels with tang, bevelled and plain (long type))	-	30000	-
3.2(Butt chisels with tang, bevelled and plain (short type))	-	30000	-
3.3(Firmer gouges)	-	30000	-
4.1.1(Material)	-	30000	-
4.1.2(Cutting edge)	-	30000	-
4.1.3(Bolster and neck)	-	30000	-
4.1.4(Tang)	-	30000	-
4.1.5(Finish)	-	30000	-
4.2.1(Shape(Handle))	-	30000	-
4.2.2(Material (Handle))	-	30000	-
4.2.3(Handle fixing to blade (Handle))	-	30000	-
5.1.1(Test for soundness)	-	30000	-
5.1.2(Bending test (chisels))	-	30000	-
5.2(Test for strength of handle)	-	30000	-

31 Dec, 2029

-
Included w.e.f. 18.08.2025

4612

Alpha Test House Services LLP (160), Sahibzada Ajit Singh Nagar

9138706

IS 4378 : Part 2 (2018)

Pliers and nippers: Part 2 end cutting nippers - Dimensions and test values (Third Revision)

All

20000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(End cutting nippers for hard wire)	-	20000	-
3.2(End cutting nippers for medium hard wire)	-	20000	-
3.3(Toggle lever assisted end cutting nippers for hard wire)	-	20000	-
4(Designation)	-	20000	-
5(Marking)	-	20000	-

31 Dec, 2029

-
Included w.e.f. 18.08.2025

4613

BIS, Bengaluru Branch Laboratory (BNBL)

None

IS 15848 (2025)

ZINC SULPHATE, MONOHYDRATE, AGRICULTURAL GRADE - SPECIFICATION ( First Revision)

8250 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-3.1 (Description)	-
Cl-3.2, Table-1 (i) (Zinc (as Zn), percent by mass, Min)	-
Cl-3.2, Table-1 (ii) (Magnesium (as Mg), percent by mass, Max)	-
Cl-3.2, Table-1 (iii) (Copper (as Cu), percent by mass, Max)	-
Cl-3.2, Table-1 (iv) (Lead (as Pb), percent by mass, Max)	-
Cl-3.2, Table-1 (v) (pH of 5 percent solution (m/v), Min)	-
Cl-3.2, Table-1 (vi) (Matter insoluble in water, percent by mass, Max)	-
Cl-3.2, Table-1 (vii) (Iron (as Fe), percent by mass, Max)	-
Cl-3.2, Table-1 (viii) (Sulphur (as S), percent by mass, Max)	-
Cl-3.2, Table-1 (ix) (Cadmium (as Cd), percent by mass, Max)	-
Cl-3.2, Table-1 (x) (Arsenic (as As2O3), percent by mass, Max)	-

-
Complete for chemical section.

4614

Dashmesh Test Lab Private Limited

8186926

IS 1258 (2024)

Bayonet lampholders (Fifth Revision)

12800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(General requirements)	-	200	-
8(Marking)	-	300	-
7(Classification)	-	500	-
6(Standard ratings)	-	200	-
11(Terminals)	-	500	-
9(Dimensions)	-	500	-
10(Protection against electric shock)	-	500	-
12(Provision for earthing)	-	500	-
13(Construction)	-	500	-
14(Switched lampholders)	-	500	-
15(Moisture resistance, insulation resistance and electrical strength)	-	500	-
16(Mechanical strength)	-	500	-
17(Screws, current-carrying parts and connections)	-	500	-
18(Creepage distances and clearances)	-	500	-
19(General resistance to heat)	-	500	-
20(Resistance to heat, fire and tracking)	-	1000	-
21(Resistance to excessive residual stresses (season cracking) and to rusting)	-	500	-
Annex A(Season cracking/corrosion test)	-	500	-
12.4(Thermal tests)	-	500	-
9.1(Lampholder dimensions)	-	500	-
11.2(Terminals)	-	500	-
12.3(Provision for earthing)	-	500	-
13.1(Construction)	-	500	-
13.8(Construction)	-	500	-
14.4(Switched lampholders)	-	500	-
15.1(Moisture resistance, insulation resistance and electrical strength)	-	500	-
16.7(Mechanical strength)	-	500	-
16.8(Mechanical strength)	-	500	-
21.2(Resistance to excessive residual stresses (season cracking) and to rusting)	-	500	-

22 Jul, 2028

-
Included w.e.f.01.10.2025

4615

Alpha Test House Services LLP (160), Sahibzada Ajit Singh Nagar

9138706

IS 4378 : Part 1 (2017)

Pliers and nippers: Part 1 diagonal cutting nippers - Dimensions and tests values (Third Revision)

All

20000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(Diagonal cutting nippers for hard wire)	-	20000	-
3.2(Diagonal cutting nippers for medium hard wire)	-	20000	-
3.3(Toggle lever assisted side cutting nippers for hard wire)	-	20000	-
4(Designation)	-	20000	-
5(Marking)	-	20000	-

31 Dec, 2029

-
Included w.e.f. 18.08.2025

4616

SGS INDIA PRIVATE LIMITED, BENGALURU

6132626

IS/IEC 62368 : Part 1 (2023)

Audio Video Information and Communication Technology Equipment - Part 1: Safety Requirements (Second Revision)

240000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4.1(General- materials, components)	-	2000	10% Discount for the BIS
Cl-4.2(Energy source classifications)	-	2000	10% Discount for the BIS
Cl-4.3(Protection against energy sources)	-	2000	10% Discount for the BIS
Cl-4.4(Safeguards)	-	1000	10% Discount for the BIS
Cl-4.5(Explosion)	-	500	10% Discount for the BIS
Cl-4.6(Fixing of conductors and conductive parts)	-	500	10% Discount for the BIS
Cl-4.7(Equipment for direct insertion into mains socket-outlets)	-	1000	10% Discount for the BIS
Cl-4.8(Equipment containing coin or button cell batteries)	-	2000	10% Discount for the BIS
Cl-4.9(Likelihood of fire or shock due to entry of conductive objects)	-	500	10% Discount for the BIS
Cl-4.10(Components requirements)	-	1000	10% Discount for the BIS
Cl-5.1(General- Electrically-caused injury)	-	1000	10% Discount for the BIS
Cl-5.2(Classification and limits of electrical energy sources)	-	3000	10% Discount for the BIS
Cl-5.3(Protection against electrical energy sources)	-	2000	10% Discount for the BIS
Cl-5.4(Insulation materials and requirements)	-	5000	10% Discount for the BIS
Cl-5.5(Components as safeguards)	-	5000	10% Discount for the BIS
Cl-5.6(Protective conductor)	-	1000	10% Discount for the BIS
Cl-5.7(Prospective touch voltage, touch current and protective conductor current)	-	4000	10% Discount for the BIS
Cl-5.8(Backfeed safeguard in battery backed up supplies)	-	1200	10% Discount for the BIS
Cl-6.1(General- Electrically-caused fire)	-	500	10% Discount for the BIS
Cl-6.2(Classification of power sources and potential ignition sources)	-	2000	10% Discount for the BIS
Cl-6.3(Safeguards against fire under normal operating conditions and abnormal operating conditions)	-	2500	10% Discount for the BIS
Cl-6.4(Safeguards against fire under single fault conditions)	-	3000	10% Discount for the BIS
Cl-6.5(Internal and external wiring)	-	2000	10% Discount for the BIS
Cl-7.1(General- Injury caused by hazardous substances)	-	200	10% Discount for the BIS
Cl-7.2(Reduction of exposure to hazardous substances)	-	1000	10% Discount for the BIS
Cl-7.3(Ozone exposure)	-	200	10% Discount for the BIS
Cl-7.4(Use of personal safeguards or personal protective equipment (PPE)	-	200	10% Discount for the BIS
Cl-7.5(Use of instructional safeguards and instructions)	-	200	10% Discount for the BIS
Cl-8.1(General- Mechanically-caused injury)	-	500	10% Discount for the BIS
Cl-8.2(Mechanical energy source classifications)	-	500	10% Discount for the BIS
Cl-8.3(Safeguards against mechanical energy sources)	-	500	10% Discount for the BIS
Cl-8.4(Safeguards against parts with sharp edges and corners)	-	500	10% Discount for the BIS
Cl-8.5(Safeguards against moving parts)	-	3000	10% Discount for the BIS
Cl-8.6(Stability of equipment)	-	3000	10% Discount for the BIS
Cl-8.7(Equipment mounted to a wall, ceiling or other structure)	-	2500	10% Discount for the BIS
Cl-8.8(Handle strength)	-	1000	10% Discount for the BIS
Cl-8.9(Wheels or casters attachment requirements)	-	1000	10% Discount for the BIS
Cl-8.10(Carts, stands, and similar carriers)	-	1500	10% Discount for the BIS
Cl-8.11(Mounting means for slide-rail mounted equipment (SRME))	-	2000	10% Discount for the BIS
Cl-9.1(General-Thermal burn injury)	-	500	10% Discount for the BIS
Cl-9.2(Thermal energy source classifications)	-	3000	10% Discount for the BIS
Cl-9.3(Touch temperature limits)	-	4000	10% Discount for the BIS
Cl-9.4(Safeguards against thermal energy sources)	-	500	10% Discount for the BIS
Cl-9.5(Requirements for safeguards)	-	500	10% Discount for the BIS
Annex A(Examples of equipment within the scope of this document)	-	0	-
Annex B(General- Normal operating condition tests, abnormal operating condition tests and single fault condition tests)	-	500	10% Discount for the BIS
Annex B-2(Normal operating conditions)	-	4000	10% Discount for the BIS
Annex B-3(Simulated abnormal operating conditions)	-	4000	10% Discount for the BIS
Annex B-4(Simulated single fault conditions)	-	4000	10% Discount for the BIS
Annex D-1(Impulse test generators)	-	3000	10% Discount for the BIS
Annex D-2(Antenna interface test generator)	-	3000	10% Discount for the BIS
Annex D-3(Electronic pulse generator)	-	3000	10% Discount for the BIS
Annex E-1(Electrical energy source classification for audio signals)	-	3000	10% Discount for the BIS
Annex E-2(Audio signals used during test)	-	3000	10% Discount for the BIS
Annex E-3(Operating conditions of equipment containing an audio amplifier)	-	3000	10% Discount for the BIS
Annex F-1(General-Equipment markings, instructions, and instructional safeguards)	-	500	10% Discount for the BIS
Annex F-2(Letter symbols and graphical symbols)	-	500	10% Discount for the BIS
Annex F-3(Equipment markings)	-	500	10% Discount for the BIS
Annex F-4(Instructions)	-	500	10% Discount for the BIS
Annex F-5(Instructional safeguards)	-	500	10% Discount for the BIS
Annex G-1(Switches)	-	0	-
Annex G-2(Relays)	-	0	-
Annex G-3(Protective devices)	-	500	10% Discount for the BIS
Annex G-4(Connectors)	-	0	-
Annex G-5(Wound components)	-	5000	10% Discount for the BIS
Annex G-6(Wire insulation)	-	1000	10% Discount for the BIS
Annex G-7(Mains power supply cords and interconnection cables)	-	1000	10% Discount for the BIS
Annex G-8(Varistors)	-	0	-
Annex G-10(Resistors)	-	5000	10% Discount for the BIS
Annex G-11(Capacitors and RC units)	-	2000	10% Discount for the BIS
Annex G-12(Optocouplers)	-	0	-
Annex G-13(Printed boards)	-	3000	10% Discount for the BIS
Annex G-14(Coatings on component terminals)	-	1000	10% Discount for the BIS
Annex G-15(Pressurized liquid filled components or LFC assemblies)	-	2000	10% Discount for the BIS
Annex G-16(IC that includes a capacitor discharge function (ICX))	-	7000	10% Discount for the BIS
Annex H-1(General- Criteria for telephone ringing signals)	-	500	10% Discount for the BIS
Annex H-2(Method A)	-	2000	10% Discount for the BIS
Annex H-3(Method B)	-	2000	10% Discount for the BIS
Annex I(Overvoltage categories (see IEC 60364-4-44))	-	500	10% Discount for the BIS
Annex K-1(General- Safety interlocks)	-	500	10% Discount for the BIS
Annex K-2(Components of the safety interlock safeguard mechanism)	-	500	10% Discount for the BIS
Annex K-3(Inadvertent change of operating mode)	-	500	10% Discount for the BIS
Annex K-4(Interlock safeguard override)	-	500	10% Discount for the BIS
Annex K-5(Fail-safe)	-	0	-
Annex K-6(Mechanically operated safety interlocks)	-	0	-
Annex K-7(Interlock circuit isolation)	-	0	-
Annex L-1(General requirements)	-	0	-
Annex L-2(Permanently connected equipment)	-	0	-
Annex L-3()	-	0	-
Annex L-4(Single-phase equipment)	-	0	-
Annex L-5(Three-phase equipment)	-	0	-
Annex L-6(Switches as disconnect devices)	-	0	-
Annex L-7(Plugs as disconnect devices)	-	0	-
Annex L-8(Multiple power sources)	-	0	-
Annex L-9(Compliance criteria)	-	1000	10% Discount for the BIS
Annex M-1(General requirements)	-	0	-
Annex M-2(Safety of batteries and their cells)	-	0	-
Annex M-3(Protection circuits for batteries provided within the equipment)	-	4000	10% Discount for the BIS
Annex M-4(Additional safeguards for equipment containing a secondary lithium battery)	-	4000	10% Discount for the BIS
Annex M-5(Risk of burn due to short-circuit during carrying)	-	3000	10% Discount for the BIS
Annex M-6(Safeguards against short-circuits)	-	500	10% Discount for the BIS
Annex M-9(Preventing electrolyte spillage)	-	500	10% Discount for the BIS
Annex M-10(Instructions to prevent reasonably foreseeable misuse)	-	500	10% Discount for the BIS
Annex N(Electrochemical potentials (V))	-	500	10% Discount for the BIS
Annex O(Measurement of creepage distances and clearances)	-	4000	10% Discount for the BIS
Annex P-1(General-Safeguards against conductive objects)	-	500	10% Discount for the BIS
Annex P-2(Safeguards against entry or consequences of entry of a foreign object)	-	1000	10% Discount for the BIS
Annex P-3(Safeguards against spillage of internal liquids)	-	1000	10% Discount for the BIS
Annex P-4(Metallized coatings and adhesives securing parts)	-	500	10% Discount for the BIS
Annex Q-1(Limited power source)	-	4000	10% Discount for the BIS
Annex Q-2(Test for external circuits – paired conductor cable)	-	3000	10% Discount for the BIS
Annex S-1(Flammability test for fire enclosure and fire barrier materials of equipment where the steady state power does not exceed 4 000 W)	-	5000	10% Discount for the BIS
Annex S-2(Flammability test for fire enclosure and fire barrier integrity)	-	5000	10% Discount for the BIS
Annex S-4(Flammability classification of materials)	-	1000	10% Discount for the BIS
Annex S-5(Flammability test for fire enclosure materials of equipment with a steady state power exceeding 4 000 W)	-	5000	10% Discount for the BIS
Annex T-1(General-Mechanical strength tests)	-	500	10% Discount for the BIS
Annex T-2(Steady force test, 10 N)	-	500	10% Discount for the BIS
Annex T-3(Steady force test, 30 N)	-	500	10% Discount for the BIS
Annex T-4(Steady force test, 100 N)	-	1000	10% Discount for the BIS
Annex T-5(Steady force test, 250 N)	-	3000	10% Discount for the BIS
Annex T-6(Enclosure impact test)	-	2000	10% Discount for the BIS
Annex T-7(Drop test)	-	2000	10% Discount for the BIS
Annex T-8(Stress relief test)	-	7000	10% Discount for the BIS
Annex T-9(Glass impact test)	-	5000	10% Discount for the BIS
Annex T-11(Test for telescoping or rod antennas)	-	1500	10% Discount for the BIS
Annex V-1(Accessible parts of equipment)	-	3000	10% Discount for the BIS
Annex V-2(Accessible part criterion)	-	500	10% Discount for the BIS
Annex W(Comparison of terms introduced in this document)	-	0	-
Annex X("Alternative method for determining clearances for insulation in circuits connected to an AC mains not exceeding 420 V peak (300 V RMS)")	-	7000	10% Discount for the BIS
Annex Y-4(Gaskets)	-	0	-
Annex T-10(Glass fragmentation test)	-	3000	10% Discount for the BIS
Annex Y-6(Mechanical strength of enclosures)	-	3000	10% Discount for the BIS
Cl-9.6(Requirements for wireless power transmitters)	-	4000	10% Discount for the BIS
Annex S-6(Grille covering material, cloth, and reticulated foam)	-	0	-
Annex Y-1(General- Construction requirements for outdoor enclosures)	-	0	-
Annex Y-5(Protection of equipment within an outdoor enclosure)	-	4000	10% Discount for the BIS
Cl-4.1(General- materials, components)	-	2000	10% Discount for the BIS
Cl-4.2(Energy source classifications)	-	2000	10% Discount for the BIS
Cl-4.3(Protection against energy sources)	-	2000	10% Discount for the BIS
Cl-4.4(Safeguards)	-	1000	10% Discount for the BIS
Cl-4.5(Explosion)	-	500	10% Discount for the BIS
Cl-4.6(Fixing of conductors and conductive parts)	-	500	10% Discount for the BIS
Cl-4.7(Equipment for direct insertion into mains socket-outlets)	-	1000	10% Discount for the BIS
Cl-4.8(Equipment containing coin or button cell batteries)	-	2000	10% Discount for the BIS
Cl-4.9(Likelihood of fire or shock due to entry of conductive objects)	-	500	10% Discount for the BIS
Cl-4.10(Components requirements)	-	1000	10% Discount for the BIS
Cl-5.1(General- Electrically-caused injury)	-	1000	10% Discount for the BIS
Cl-5.2(Classification and limits of electrical energy sources)	-	3000	10% Discount for the BIS
Cl-5.3(Protection against electrical energy sources)	-	2000	10% Discount for the BIS
Cl-5.4(Insulation materials and requirements)	-	5000	10% Discount for the BIS
Cl-5.5(Components as safeguards)	-	5000	10% Discount for the BIS
Cl-5.6(Protective conductor)	-	1000	10% Discount for the BIS
Cl-5.7(Prospective touch voltage, touch current and protective conductor current)	-	5000	10% Discount for the BIS
Cl-5.8(Backfeed safeguard in battery backed up supplies)	-	1200	10% Discount for the BIS
Cl-6.1(General- Electrically-caused fire)	-	500	10% Discount for the BIS
Cl-6.2(Classification of power sources and potential ignition sources)	-	2000	10% Discount for the BIS
Cl-6.3(Safeguards against fire under normal operating conditions and abnormal operating conditions)	-	2500	10% Discount for the BIS
Cl-6.4(Safeguards against fire under single fault conditions)	-	3000	10% Discount for the BIS
Cl-6.5(Internal and external wiring)	-	3000	10% Discount for the BIS
Cl-7.1(General- Injury caused by hazardous substances)	-	200	10% Discount for the BIS
Cl-7.2(Reduction of exposure to hazardous substances)	-	1000	10% Discount for the BIS
Cl-7.3(Ozone exposure)	-	200	10% Discount for the BIS
Cl-7.4(Use of personal safeguards or personal protective equipment (PPE)	-	200	10% Discount for the BIS
Cl-7.5(Use of instructional safeguards and instructions)	-	200	10% Discount for the BIS
Cl-8.1(General- Mechanically-caused injury)	-	500	10% Discount for the BIS
Cl-8.2(Mechanical energy source classifications)	-	500	10% Discount for the BIS
Cl-8.3(Safeguards against mechanical energy sources)	-	500	10% Discount for the BIS
Cl-8.4(Safeguards against parts with sharp edges and corners)	-	500	10% Discount for the BIS
Cl-8.5(Safeguards against moving parts)	-	4000	10% Discount for the BIS
Cl-8.6(Stability of equipment)	-	4000	10% Discount for the BIS
Cl-8.7(Equipment mounted to a wall, ceiling or other structure)	-	2500	10% Discount for the BIS
Cl-8.8(Handle strength)	-	1000	10% Discount for the BIS
Cl-8.9(Wheels or casters attachment requirements)	-	1000	10% Discount for the BIS
Cl-8.10(Carts, stands, and similar carriers)	-	1500	10% Discount for the BIS
Cl-8.11(Mounting means for slide-rail mounted equipment (SRME))	-	3000	10% Discount for the BIS
Cl-9.1(General-Thermal burn injury)	-	500	10% Discount for the BIS
Cl-9.2(Thermal energy source classifications)	-	3000	10% Discount for the BIS
Cl-9.3(Touch temperature limits)	-	5000	10% Discount for the BIS
Cl-9.4(Safeguards against thermal energy sources)	-	500	10% Discount for the BIS
Cl-9.5(Requirements for safeguards)	-	500	10% Discount for the BIS
Annex A(Examples of equipment within the scope of this document)	-	0	-
Annex B(General- Normal operating condition tests, abnormal operating condition tests and single fault condition tests)	-	500	10% Discount for the BIS
Annex B-2(Normal operating conditions)	-	5000	10% Discount for the BIS
Annex B-3(Simulated abnormal operating conditions)	-	5000	10% Discount for the BIS
Annex B-4(Simulated single fault conditions)	-	5000	10% Discount for the BIS
Annex D-1(Impulse test generators)	-	3000	10% Discount for the BIS
Annex D-2(Antenna interface test generator)	-	3000	10% Discount for the BIS
Annex D-3(Electronic pulse generator)	-	2000	10% Discount for the BIS
Annex E-1(Electrical energy source classification for audio signals)	-	3000	10% Discount for the BIS
Annex E-2(Audio signals used during test)	-	3000	10% Discount for the BIS
Annex E-3(Operating conditions of equipment containing an audio amplifier)	-	3000	10% Discount for the BIS
Annex F-1(General-Equipment markings, instructions, and instructional safeguards)	-	500	10% Discount for the BIS
Annex F-2(Letter symbols and graphical symbols)	-	500	10% Discount for the BIS
Annex F-3(Equipment markings)	-	500	10% Discount for the BIS
Annex F-4(Instructions)	-	500	10% Discount for the BIS
Annex F-5(Instructional safeguards)	-	500	10% Discount for the BIS
Annex G-1(Switches)	-	0	-
Annex G-2(Relays)	-	0	-
Annex G-3(Protective devices)	-	500	10% Discount for the BIS
Annex G-4(Connectors)	-	0	-
Annex G-5(Wound components)	-	200	10% Discount for the BIS
Annex G-6(Wire insulation)	-	1000	10% Discount for the BIS
Annex G-7(Mains power supply cords and interconnection cables)	-	1000	10% Discount for the BIS
Annex G-8(Varistors)	-	0	-
Annex G-10(Resistors)	-	7000	10% Discount for the BIS
Annex G-11(Capacitors and RC units)	-	2000	10% Discount for the BIS
Annex G-12(Optocouplers)	-	0	-
Annex G-13(Printed boards)	-	3000	10% Discount for the BIS
Annex G-14(Coatings on component terminals)	-	1000	10% Discount for the BIS
Annex G-15(Pressurized liquid filled components or LFC assemblies)	-	2000	10% Discount for the BIS
Annex G-16(IC that includes a capacitor discharge function (ICX))	-	10000	10% Discount for the BIS
Annex H-1(General- Criteria for telephone ringing signals)	-	500	10% Discount for the BIS
Annex H-2(Method A)	-	2000	10% Discount for the BIS
Annex H-3(Method B)	-	2000	10% Discount for the BIS
Annex I(Overvoltage categories (see IEC 60364-4-44))	-	500	10% Discount for the BIS
Annex K-1(General- Safety interlocks)	-	500	10% Discount for the BIS
Annex K-2(Components of the safety interlock safeguard mechanism)	-	500	10% Discount for the BIS
Annex K-3(Inadvertent change of operating mode)	-	500	10% Discount for the BIS
Annex K-4(Interlock safeguard override)	-	500	10% Discount for the BIS
Annex K-5(Fail-safe)	-	0	-
Annex K-6(Mechanically operated safety interlocks)	-	0	-
Annex K-7(Interlock circuit isolation)	-	0	-
Annex L-1(General requirements)	-	0	-
Annex L-2(Permanently connected equipment)	-	0	-
Annex L-3()	-	0	-
Annex L-4(Single-phase equipment)	-	0	-
Annex L-5(Three-phase equipment)	-	0	-
Annex L-6(Switches as disconnect devices)	-	0	-
Annex L-7(Plugs as disconnect devices)	-	0	-
Annex L-8(Multiple power sources)	-	0	-
Annex L-9(Compliance criteria)	-	1000	10% Discount for the BIS
Annex M-1(General requirements)	-	0	-
Annex M-2(Safety of batteries and their cells)	-	0	-
Annex M-3(Protection circuits for batteries provided within the equipment)	-	4000	10% Discount for the BIS
Annex M-4(Additional safeguards for equipment containing a secondary lithium battery)	-	4000	10% Discount for the BIS
Annex M-5(Risk of burn due to short-circuit during carrying)	-	3000	10% Discount for the BIS
Annex M-6(Safeguards against short-circuits)	-	500	10% Discount for the BIS
Annex M-9(Preventing electrolyte spillage)	-	500	10% Discount for the BIS
Annex M-10(Instructions to prevent reasonably foreseeable misuse)	-	500	10% Discount for the BIS
Annex N(Electrochemical potentials (V))	-	500	10% Discount for the BIS
Annex O(Measurement of creepage distances and clearances)	-	5000	10% Discount for the BIS
Annex P-1(General-Safeguards against conductive objects)	-	500	10% Discount for the BIS
Annex P-2(Safeguards against entry or consequences of entry of a foreign object)	-	1000	10% Discount for the BIS
Annex P-3(Safeguards against spillage of internal liquids)	-	1000	10% Discount for the BIS
Annex P-4(Metallized coatings and adhesives securing parts)	-	500	10% Discount for the BIS
Annex Q-1(Limited power source)	-	5000	10% Discount for the BIS
Annex Q-2(Test for external circuits – paired conductor cable)	-	3000	10% Discount for the BIS
Annex S-1(Flammability test for fire enclosure and fire barrier materials of equipment where the steady state power does not exceed 4 000 W)	-	7000	10% Discount for the BIS
Annex S-2(Flammability test for fire enclosure and fire barrier integrity)	-	7000	10% Discount for the BIS
Annex S-4(Flammability classification of materials)	-	1000	10% Discount for the BIS
Annex S-5(Flammability test for fire enclosure materials of equipment with a steady state power exceeding 4 000 W)	-	7000	10% Discount for the BIS
Annex T-1(General-Mechanical strength tests)	-	500	10% Discount for the BIS
Annex T-2(Steady force test, 10 N)	-	500	10% Discount for the BIS
Annex T-3(Steady force test, 30 N)	-	500	10% Discount for the BIS
Annex T-4(Steady force test, 100 N)	-	1000	10% Discount for the BIS
Annex T-5(Steady force test, 250 N)	-	3000	10% Discount for the BIS
Annex T-6(Enclosure impact test)	-	2000	10% Discount for the BIS
Annex T-7(Drop test)	-	2000	10% Discount for the BIS
Annex T-8(Stress relief test)	-	7000	10% Discount for the BIS
Annex T-9(Glass impact test)	-	5000	10% Discount for the BIS
Annex T-11(Test for telescoping or rod antennas)	-	1500	10% Discount for the BIS
Annex V-1(Accessible parts of equipment)	-	3000	10% Discount for the BIS
Annex V-2(Accessible part criterion)	-	500	10% Discount for the BIS
Annex W(Comparison of terms introduced in this document)	-	0	-
Annex X("Alternative method for determining clearances for insulation in circuits connected to an AC mains not exceeding 420 V peak (300 V RMS)")	-	7000	10% Discount for the BIS
Annex T-10(Glass fragmentation test)	-	3000	10% Discount for the BIS
Annex Y-6(Mechanical strength of enclosures)	-	3000	10% Discount for the BIS
Cl-9.6(Requirements for wireless power transmitters)	-	4000	10% Discount for the BIS
Annex S-6(Grille covering material, cloth, and reticulated foam)	-	0	-
Annex Y-1(General- Construction requirements for outdoor enclosures)	-	0	-
Annex Y-5(Protection of equipment within an outdoor enclosure)	-	4000	10% Discount for the BIS
Cl-4.1(General- materials, components)	-	0	-
Cl-4.2(Energy source classifications)	-	1000	10% Discount for the BIS
Cl-4.3(Protection against energy sources)	-	1000	10% Discount for the BIS
Cl-4.4(Safeguards)	-	1000	10% Discount for the BIS
Cl-4.5(Explosion)	-	1000	10% Discount for the BIS
Cl-4.6(Fixing of conductors and conductive parts)	-	1000	10% Discount for the BIS
Cl-4.7(Equipment for direct insertion into mains socket-outlets)	-	1000	10% Discount for the BIS
Cl-4.8(Equipment containing coin or button cell batteries)	-	1000	10% Discount for the BIS
Cl-4.9(Likelihood of fire or shock due to entry of conductive objects)	-	1000	10% Discount for the BIS
Cl-4.10(Components requirements)	-	1000	10% Discount for the BIS
Cl-5.1(General- Electrically-caused injury)	-	1000	10% Discount for the BIS
Cl-5.2(Classification and limits of electrical energy sources)	-	1000	10% Discount for the BIS
Cl-5.3(Protection against electrical energy sources)	-	1000	10% Discount for the BIS
Cl-5.4(Insulation materials and requirements)	-	1000	10% Discount for the BIS
Cl-5.5(Components as safeguards)	-	1000	10% Discount for the BIS
Cl-5.6(Protective conductor)	-	1000	10% Discount for the BIS
Cl-5.7(Prospective touch voltage, touch current and protective conductor current)	-	1000	10% Discount for the BIS
Cl-5.8(Backfeed safeguard in battery backed up supplies)	-	1000	10% Discount for the BIS
Cl-6.1(General- Electrically-caused fire)	-	1000	10% Discount for the BIS
Cl-6.2(Classification of power sources and potential ignition sources)	-	1000	10% Discount for the BIS
Cl-6.3(Safeguards against fire under normal operating conditions and abnormal operating conditions)	-	1000	10% Discount for the BIS
Cl-6.4(Safeguards against fire under single fault conditions)	-	1000	10% Discount for the BIS
Cl-6.5(Internal and external wiring)	-	1000	10% Discount for the BIS
Cl-7.1(General- Injury caused by hazardous substances)	-	1000	10% Discount for the BIS
Cl-7.2(Reduction of exposure to hazardous substances)	-	1000	10% Discount for the BIS
Cl-7.3(Ozone exposure)	-	1000	10% Discount for the BIS
Cl-7.4(Use of personal safeguards or personal protective equipment (PPE)	-	1000	10% Discount for the BIS
Cl-7.5(Use of instructional safeguards and instructions)	-	1000	10% Discount for the BIS
Cl-8.1(General- Mechanically-caused injury)	-	1000	10% Discount for the BIS
Cl-8.2(Mechanical energy source classifications)	-	1000	10% Discount for the BIS
Cl-8.3(Safeguards against mechanical energy sources)	-	1000	10% Discount for the BIS
Cl-8.4(Safeguards against parts with sharp edges and corners)	-	1000	10% Discount for the BIS
Cl-8.5(Safeguards against moving parts)	-	1000	10% Discount for the BIS
Cl-8.6(Stability of equipment)	-	1000	10% Discount for the BIS
Cl-8.7(Equipment mounted to a wall, ceiling or other structure)	-	1000	10% Discount for the BIS
Cl-8.8(Handle strength)	-	1000	10% Discount for the BIS
Cl-8.9(Wheels or casters attachment requirements)	-	1000	10% Discount for the BIS
Cl-8.10(Carts, stands, and similar carriers)	-	1000	10% Discount for the BIS
Cl-8.11(Mounting means for slide-rail mounted equipment (SRME))	-	1000	10% Discount for the BIS
Cl-9.1(General-Thermal burn injury)	-	1000	10% Discount for the BIS
Cl-9.2(Thermal energy source classifications)	-	1000	10% Discount for the BIS
Cl-9.3(Touch temperature limits)	-	1000	10% Discount for the BIS
Cl-9.4(Safeguards against thermal energy sources)	-	1000	10% Discount for the BIS
Cl-9.5(Requirements for safeguards)	-	1000	10% Discount for the BIS
Annex A(Examples of equipment within the scope of this document)	-	1000	10% Discount for the BIS
Annex B(General- Normal operating condition tests, abnormal operating condition tests and single fault condition tests)	-	1000	10% Discount for the BIS
Annex B-2(Normal operating conditions)	-	1000	10% Discount for the BIS
Annex B-3(Simulated abnormal operating conditions)	-	1000	10% Discount for the BIS
Annex B-4(Simulated single fault conditions)	-	1000	10% Discount for the BIS
Annex D-1(Impulse test generators)	-	1000	10% Discount for the BIS
Annex D-2(Antenna interface test generator)	-	1000	10% Discount for the BIS
Annex D-3(Electronic pulse generator)	-	1000	10% Discount for the BIS
Annex E-1(Electrical energy source classification for audio signals)	-	1000	10% Discount for the BIS
Annex E-2(Audio signals used during test)	-	1000	10% Discount for the BIS
Annex E-3(Operating conditions of equipment containing an audio amplifier)	-	1000	10% Discount for the BIS
Annex F-1(General-Equipment markings, instructions, and instructional safeguards)	-	1000	10% Discount for the BIS
Annex F-2(Letter symbols and graphical symbols)	-	1000	10% Discount for the BIS
Annex F-3(Equipment markings)	-	1000	10% Discount for the BIS
Annex F-4(Instructions)	-	1000	10% Discount for the BIS
Annex F-5(Instructional safeguards)	-	1000	10% Discount for the BIS
Annex G-1(Switches)	-	1000	10% Discount for the BIS
Annex G-2(Relays)	-	1000	10% Discount for the BIS
Annex G-3(Protective devices)	-	1000	10% Discount for the BIS
Annex G-4(Connectors)	-	1000	10% Discount for the BIS
Annex G-5(Wound components)	-	1000	10% Discount for the BIS
Annex G-6(Wire insulation)	-	1000	10% Discount for the BIS
Annex G-7(Mains power supply cords and interconnection cables)	-	1000	10% Discount for the BIS
Annex G-8(Varistors)	-	1000	10% Discount for the BIS
Annex G-10(Resistors)	-	1000	10% Discount for the BIS
Annex G-11(Capacitors and RC units)	-	1000	10% Discount for the BIS
Annex G-12(Optocouplers)	-	1000	10% Discount for the BIS
Annex G-13(Printed boards)	-	1000	10% Discount for the BIS
Annex G-14(Coatings on component terminals)	-	1000	10% Discount for the BIS
Annex G-15(Pressurized liquid filled components or LFC assemblies)	-	1000	10% Discount for the BIS
Annex G-16(IC that includes a capacitor discharge function (ICX))	-	1000	10% Discount for the BIS
Annex H-1(General- Criteria for telephone ringing signals)	-	1000	10% Discount for the BIS
Annex H-2(Method A)	-	1000	10% Discount for the BIS
Annex H-3(Method B)	-	1000	10% Discount for the BIS
Annex I(Overvoltage categories (see IEC 60364-4-44))	-	1000	10% Discount for the BIS
Annex K-1(General- Safety interlocks)	-	1000	10% Discount for the BIS
Annex K-2(Components of the safety interlock safeguard mechanism)	-	1000	10% Discount for the BIS
Annex K-3(Inadvertent change of operating mode)	-	1000	10% Discount for the BIS
Annex K-4(Interlock safeguard override)	-	1000	10% Discount for the BIS
Annex K-5(Fail-safe)	-	1000	10% Discount for the BIS
Annex K-6(Mechanically operated safety interlocks)	-	1000	10% Discount for the BIS
Annex K-7(Interlock circuit isolation)	-	1000	10% Discount for the BIS
Annex L-1(General requirements)	-	1000	10% Discount for the BIS
Annex L-2(Permanently connected equipment)	-	1000	10% Discount for the BIS
Annex L-3()	-	1000	10% Discount for the BIS
Annex L-4(Single-phase equipment)	-	1000	10% Discount for the BIS
Annex L-5(Three-phase equipment)	-	1000	10% Discount for the BIS
Annex L-6(Switches as disconnect devices)	-	1000	10% Discount for the BIS
Annex L-7(Plugs as disconnect devices)	-	1000	10% Discount for the BIS
Annex L-8(Multiple power sources)	-	1000	10% Discount for the BIS
Annex L-9(Compliance criteria)	-	1000	10% Discount for the BIS
Annex M-1(General requirements)	-	1000	10% Discount for the BIS
Annex M-2(Safety of batteries and their cells)	-	1000	10% Discount for the BIS
Annex M-3(Protection circuits for batteries provided within the equipment)	-	1000	10% Discount for the BIS
Annex M-4(Additional safeguards for equipment containing a secondary lithium battery)	-	1000	10% Discount for the BIS
Annex M-5(Risk of burn due to short-circuit during carrying)	-	1000	10% Discount for the BIS
Annex M-6(Safeguards against short-circuits)	-	1000	10% Discount for the BIS
Annex M-9(Preventing electrolyte spillage)	-	1000	10% Discount for the BIS
Annex M-10(Instructions to prevent reasonably foreseeable misuse)	-	1000	10% Discount for the BIS
Annex N(Electrochemical potentials (V))	-	1000	10% Discount for the BIS
Annex O(Measurement of creepage distances and clearances)	-	1000	10% Discount for the BIS
Annex P-1(General-Safeguards against conductive objects)	-	1000	10% Discount for the BIS
Annex P-2(Safeguards against entry or consequences of entry of a foreign object)	-	1000	10% Discount for the BIS
Annex P-3(Safeguards against spillage of internal liquids)	-	1000	10% Discount for the BIS
Annex P-4(Metallized coatings and adhesives securing parts)	-	1000	10% Discount for the BIS
Annex Q-1(Limited power source)	-	1000	10% Discount for the BIS
Annex Q-2(Test for external circuits – paired conductor cable)	-	1000	10% Discount for the BIS
Annex S-1(Flammability test for fire enclosure and fire barrier materials of equipment where the steady state power does not exceed 4 000 W)	-	1000	10% Discount for the BIS
Annex S-2(Flammability test for fire enclosure and fire barrier integrity)	-	1000	10% Discount for the BIS
Annex S-4(Flammability classification of materials)	-	1000	10% Discount for the BIS
Annex S-5(Flammability test for fire enclosure materials of equipment with a steady state power exceeding 4 000 W)	-	1000	10% Discount for the BIS
Annex T-1(General-Mechanical strength tests)	-	1000	10% Discount for the BIS
Annex T-2(Steady force test, 10 N)	-	1000	10% Discount for the BIS
Annex T-3(Steady force test, 30 N)	-	1000	10% Discount for the BIS
Annex T-4(Steady force test, 100 N)	-	1000	10% Discount for the BIS
Annex T-5(Steady force test, 250 N)	-	1000	10% Discount for the BIS
Annex T-6(Enclosure impact test)	-	1000	10% Discount for the BIS
Annex T-7(Drop test)	-	1000	10% Discount for the BIS
Annex T-8(Stress relief test)	-	1000	10% Discount for the BIS
Annex T-9(Glass impact test)	-	1000	10% Discount for the BIS
Annex T-11(Test for telescoping or rod antennas)	-	1000	10% Discount for the BIS
Annex V-1(Accessible parts of equipment)	-	1000	10% Discount for the BIS
Annex V-2(Accessible part criterion)	-	1000	10% Discount for the BIS
Annex W(Comparison of terms introduced in this document)	-	1000	10% Discount for the BIS
Annex X("Alternative method for determining clearances for insulation in circuits connected to an AC mains not exceeding 420 V peak (300 V RMS)")	-	1000	10% Discount for the BIS
Annex T-10(Glass fragmentation test)	-	1000	10% Discount for the BIS
Annex Y-6(Mechanical strength of enclosures)	-	1000	10% Discount for the BIS
Cl-9.6(Requirements for wireless power transmitters)	-	1000	10% Discount for the BIS
Annex S-6(Grille covering material, cloth, and reticulated foam)	-	1000	10% Discount for the BIS
Annex Y-1(General- Construction requirements for outdoor enclosures)	-	1000	10% Discount for the BIS
Annex Y-5(Protection of equipment within an outdoor enclosure)	-	1000	10% Discount for the BIS
Annex J-2(Type tests)	-	1000	10% Discount for the BIS

17 Nov, 2027

-
included w.e.f 18.11.2025

4617

Bharat Test House Pvt. Ltd. 1668 Sonipat

9168306

IS 444 (2025)

Rubber Hoses, Textile-Reinforced, for General-Purpose Water Applications - Specification (Sixth Revision)

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5(Material and Construction)	-	2000	-
Cl-6.1(Internal diameters and tolerances)	-	1500	-
Cl-6.2(Concentricity)	-	1500	-
Cl-6.3(Tolerance of length)	-	1500	-
Cl-6.4(Minimum thickness of lining and cover)	-	1500	-
Cl-7.1, Table-2 (i)(Minimum tensile strength)	-	1000	-
Cl-7.1, Table-2 (ii)(Minimum elongation at break)	-	1000	-
Cl-7.1, Table-2 (iii)("Resistance to ageing: Change in tensile strength from original value (max) . Change in elongation at break from original value (max)")	-	1200	-
Cl-7.2, Table-3 (i)(Proof pressure at 23 0 C)	-	500	-
Cl-7.2, Table-3 (ii)(Change in length at proof pressure)	-	500	-
Cl-7.2, Table-3 (iii)(Minimum burst pressure)	-	500	-
Cl-7.2, Table-3 (iv)(Adhesion between component)	-	500	-
Cl-7.2, Table-3 (v)(Ozone resistance)	-	1000	-
Cl-7.2, Table-3 (vi)(Flexibility at 23ºC)	-	500	-
Cl-7.2, Table-3 (vii)(Low-temperature flexibility)	-	1000	-
Cl-8(Marking)	-	300	-
Cl-5(Material and Construction)	-	2000	-
Cl-6.1(Internal diameters and tolerances)	-	1500	-
Cl-6.2(Concentricity)	-	1500	-
Cl-6.3(Tolerance of length)	-	1500	-
Cl-6.4(Minimum thickness of lining and cover)	-	1500	-
Cl-7.1, Table-2 (i)(Minimum tensile strength)	-	1000	-
Cl-7.1, Table-2 (ii)(Minimum elongation at break)	-	1000	-
Cl-7.1, Table-2 (iii)("Resistance to ageing: Change in tensile strength from original value (max) . Change in elongation at break from original value (max)")	-	1200	-
Cl-7.2, Table-3 (i)(Proof pressure at 23 0 C)	-	500	-
Cl-7.2, Table-3 (ii)(Change in length at proof pressure)	-	500	-
Cl-7.2, Table-3 (iii)(Minimum burst pressure)	-	500	-
Cl-7.2, Table-3 (iv)(Adhesion between component)	-	500	-
Cl-7.2, Table-3 (v)(Ozone resistance)	-	1000	-
Cl-7.2, Table-3 (vi)(Flexibility at 23ºC)	-	500	-
Cl-7.2, Table-3 (vii)(Low-temperature flexibility)	-	1000	-
Cl-8(Marking)	-	300	-

-
Included w.e.f 15.10.2025

4618

Dashmesh Test Lab Private Limited

8186926

IS 1169 (1967)

Specification for electric pedestal type fans and regulators (First Revision)

13500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
18( Tolerances on rating)	-	100	-
17(Performance Reqirement)	-	500	-
16.14(Insulation-resistance )	-	500	-
16.13(Flash Test)	-	500	-
16.12(Measurement of Fan Speed)	-	500	-
16.11(Electrical Input Test)	-	500	-
16.1(Earthing Continuity Test)	-	500	-
16.9(High Voltage)	-	500	-
16.8(AC Leakage Test)	-	500	-
16.7(Power Factor)	-	200	-
16.6(Mechanical Endurance Test (for Regulators only))	-	1000	-
16.5(Cord grip test)	-	200	-
16.4(Moisture Proofness Test (for Regulators only))	-	1000	-
16.3(Temperature-rise)	-	1000	-
16.2(Air Delivery Test)	-	5000	-
14(Oscillating Mechanism)	-	1000	-
13(Silent Operation)	-	200	-
15(Marking)	-	200	-
12(Interchangeability)	-	300	-
11(Starting)	-	200	-
10(Speed Regulators)	-	300	-
9(Insulating Materials)	-	100	-
8(Height of the Fan)	-	100	-
7(Finish)	-	100	-
6(Design and General Construction)	-	100	-
5(Rated Frequency)	-	100	-
4(Rated Voltage)	-	100	-
3(Sizes, Speed & Types)	-	200	10% Discount for BIS

22 Jul, 2028

-
Included w.e.f 28.08.2025

4619

Excel Surveyors Pvt. Ltd., Kolkata

5135906

IS 1161 (2014)

Steel tubes for structural purposes - Specification (Fifth Revision)

Grade - YSt 210, YSt 240, YSt 310, YSt 355. YSt 420. YSt 460 / Size - 15 NB to 200 NB

4400 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 6(Outer Diameter, Thickness & Mass)	-	400	-
Cl 7(Workmanship)	-	200	-
Cl 8(Workmanship)	-	0	-
Cl 9(Workmanship)	-	0	-
Cl 11(Tensile Test, Flattening Test & Cold Bend Test)	-	1000	-
Cl 13(Workmanship)	-	0	-
Cl 6(Outer Diameter, Thickness & Mass)	-	0	-
Cl 7(Workmanship)	-	0	-
Cl 8(Workmanship)	-	0	-
Cl 9(Workmanship)	-	0	-
Cl 11(Tensile Test, Flattening Test & Cold Bend Test)	-	0	-
Cl 13(Workmanship)	-	0	-
Cl 6(Outer Diameter, Thickness & Mass)	-	0	-
Cl 7(Workmanship)	-	0	-
Cl 8(Workmanship)	-	0	-
Cl 9(Workmanship)	-	0	-
Cl 11(Tensile Test, Flattening Test & Cold Bend Test)	-	0	-
Cl 13(Workmanship)	-	0	-
8 AND AS PER IS 4736(UNIFORMITY OF ZINC COATING)	-	300	-
8 AND AS PER IS 4736(MASS OF ZINC COATING)	-	300	-
5 AND AS PER IS 10748(COPPER)	-	800	-
5 AND AS PER IS 10748(MICRO ALLOY)	-	0	-
5 AND AS PER IS 10748(CARBON EQUIVALENT)	-	0	-
5 AND AS PER IS 10748(CARBON)	-	0	-
Clause - 5.1, Table-3( ALUMINIUM)	-	0	-
Clause - 5.1, Table-3(SILICON)	-	0	-
Clause - 5.1, Table-3(NITROGEN)	-	0	-
Clause - 5.1, Table-3(MANGANESE)	-	0	-
Clause - 5.1, Table-3(PHOSPHURS)	-	0	-
Clause - 5.1, Table-3(SULPHUR)	-	0	-
Clause - 5.1, Table-3( CARBON)	-	0	-
9(Straightness)	-	100	-
10(Lengths)	-	100	-
Cl 11.3.1(Flattening test (over 50 mm NB))	-	0	-
Cl 11.3.1(Cold bend test (upto & including 50 mm NB))	-	0	-
Cl. 11.2 Table 2(Elongation)	-	0	-
Cl. 11.2 Table 2(Yield strength)	-	0	-
Cl. 6 , 6.2 Table 1(Square of radius of gyyration)	-	100	-
Cl. 6 , 6.2 Table 1(Modulus of section)	-	100	-
Cl. 6 , 6.2 Table 1(Moment of inertia)	-	100	-
Cl. 6 , 6.2 Table 1(Surface internal)	-	100	-
Cl. 6 , 6.2 Table 1(Surface external)	-	100	-
Cl. 6 , 6.2 Table 1(Internal volume)	-	100	-
Cl. 6 , 6.2 Table 1(Area of cross section)	-	100	-
Cl. 6 , 6.2 Table 1(Weight)	-	0	-
Cl. 6 , 6.2 Table 1(Thickness)	-	0	-
Clause 11.2, Table -2(Elongation)	-	0	-
Clause 11.2, Table -2(Yield Strength)	-	0	-
Cl 13(Workmanship)	-	0	-
Cl 11(Tensile Test, Flattening Test & Cold Bend Test)	-	0	-
Cl 9(Workmanship)	-	0	-
Cl 8(Workmanship)	-	0	-
Cl 7(Workmanship)	-	0	-
Cl 6(Outer Diameter, Thickness & Mass)	-	0	-
Cl 6(Outer Diameter, Thickness & Mass)	-	0	-
Cl 7(Workmanship)	-	0	-
Cl 8(Workmanship)	-	0	-
Cl 9(Workmanship)	-	0	-
Cl 11(Tensile Test, Flattening Test & Cold Bend Test)	-	0	-
Cl 13(Workmanship)	-	0	-
3.1 & 6.1, 6.1.1 & 6.1.3 , Table 1(Outer Diameter - SOP MT-23)	-	0	-
3.1 & 6.1, 6.1.1 & 6.1.3 , Table 1(Thickness - SOP MT-23)	-	0	-
3.1 & 6.1, 6.1.1 & 6.1.3 , Table 1(Mass - SOP MT-23)	-	0	-
3.1 & 6.1, 6.1.1 & 6.1.3 , Table 1(Area of Cross Section - SOP MT-23)	-	0	-
8.0(Mass of Zinc coating - IS:6745)	-	0	-
8.0(Freedom from defects - IS 4736)	-	100	-
8.0(Uniformity of galvanized coating - IS 4736)	-	0	-
8.0(Adhesion test-Pivoted Hammer Test - IS 4736)	-	200	-
13.0(Oiling and Painting - Visual)	-	100	-
12(Marking)	-	100	-
CL 6("1.Outer dia (04) 2.Thickness (08)")	-	0	-
CL 06(Minimum Outer dia (04))	-	0	-
CL 06(Maximum Outer dia (04))	-	0	-
CL 06(" Minimum Thickness (08)")	-	0	-
CL 06(Maximum Thickness (08))	-	0	-
Cl. 6 , 6.2 Table 1(Radius of gyration)	-	0	-

31 Dec, 2026

-
Included w.e.f. 29.09.2025

4620

National Test House (WR) - NTH, Mumbai

7107604

IS 14490 (2024)

Plain Copier Paper â Specification (Second Revision)

16000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1.1(plain copier paper)	-	500	-
5.1.2(k,)	-	500	-
5.2(Moisture)	-	500	-
5.3(Grammage (Substance))	-	1000	-
5.4(Thickness)	-	500	-
5.5(Size)	-	1000	-
5.7(Conditioning specified)	-	1000	-
5.8(Additional Requirements for Eco-Mark)	-	1000	-
5.6, Table 1, i(ISO brightness, percent, Min)	-	1000	-
5.6, Table 1, ii(Opacity, percent, Min)	-	1000	-
5.6, Table 1, iii(One minute cobb test, both sides, g/m2 , Max)	-	1000	-
5.6, Table 1, iv(Surface strength, Dennison (Wax Pick))	-	1000	-
5.6, Table 1, v(Smoothness for both sides (Bendsten), ml/min, Max)	-	1000	-
5.6, Table 1, vi(Ash content (at 900 °C), percent by mass, Max)	-	1000	-
5.6, Table 1, vii(Taber stiffness, Min: Machine direction, Cross direction)	-	1000	-
5.6, Table 1, viii(Tear Index, mN.m2 /g, Min: Machine direction, Cross direction)	-	1000	-
5.6, Table 1, ix(Tensile index, N.m/g, Min: Machine direction, Cross direction)	-	1000	-
6(PACKING AND MARKING)	-	1000	-
5.1.1(plain copier paper)	-	500	-
5.1.2(k,)	-	500	-
5.2(Moisture)	-	500	-
5.3(Grammage (Substance))	-	1000	-
5.4(Thickness)	-	500	-
5.5(Size)	-	1000	-
5.7(Conditioning specified)	-	1000	-
5.8(Additional Requirements for Eco-Mark)	-	1000	-
5.6, Table 1, i(ISO brightness, percent, Min)	-	1000	-
5.6, Table 1, ii(Opacity, percent, Min)	-	1000	-
5.6, Table 1, iii(One minute cobb test, both sides, g/m2 , Max)	-	1000	-
5.6, Table 1, iv(Surface strength, Dennison (Wax Pick))	-	1000	-
5.6, Table 1, v(Smoothness for both sides (Bendsten), ml/min, Max)	-	1000	-
5.6, Table 1, vi(Ash content (at 900 °C), percent by mass, Max)	-	1000	-
5.6, Table 1, vii(Taber stiffness, Min: Machine direction, Cross direction)	-	1000	-
5.6, Table 1, viii(Tear Index, mN.m2 /g, Min: Machine direction, Cross direction)	-	1000	-
5.6, Table 1, ix(Tensile index, N.m/g, Min: Machine direction, Cross direction)	-	1000	-
6(PACKING AND MARKING)	-	1000	-

-
Included w.e.f 21.08.2025

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number