| 5641 |
SGS India Private Limited, Thiruvallur
| 6162436
| IS 3735 (1996) |
Canvas Shoes, Rubber Sole |
Footwear |
17400 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4.1.1 Upper, Sl No. (i) of Table 1(The upper shall consist of over layer of cotton, manmade or blended
conforming' to the requirements given in Sl No. (i) of Table 1 as an overlayer and cotton drill conforming to the
requirements given in Sl No. (ii) of Table 1, as an inner layer or lining. The two fabrics shall be firmly adhered together with rubber compound. ) |
- |
600 |
|
- |
| 4.1.1 (canvas )(Breaking Load ) |
- |
600 |
|
- |
| 4.1.1 (Drill) (End & Picks/dm) |
- |
600 |
|
- |
| 4.1.1 (Drill) (Colorfastness to light ) |
- |
1000 |
|
- |
| 4.1.1.1(Colorfastness to light ) |
- |
1000 |
|
- |
| 4.1.1.2(Colorfastness to washing) |
- |
600 |
|
- |
| Cl.4.1.2 Binding Material(IS 1954 : 1990)
(IS1969 : 1985)(Cotton tape NEWAR used as binding material shall conform to the requirements prescribed in col 3 of
Table 2, when tested in accordance with the methods referred to in col 4 of the table.) |
- |
600 |
|
- |
| 4.1.2(Width ) |
- |
400 |
|
- |
| 4.1.2(Breaking Strength ) |
- |
600 |
|
- |
| 4.1.2(Colorfastness to washing) |
- |
600 |
|
- |
| 4.1.2(Colorfastness to light ) |
- |
1000 |
|
- |
| Cl.4.1.2.1
Anmex B.(Cotton, manmade or blended shall be used as binding material.'
'Coloured cotton tapes shall have fastness to day light of rating as and if agreed
to between the purchaser and the supplier when tested in accordance with IS 686 :
1985. The black tapes shall be free from sulphur dyes when tested in accordance
with Annex B.') |
- |
600 |
|
- |
| 4.1.3(Construction ) |
- |
600 |
|
- |
| 4.1.3(Single thread breaking load) |
- |
600 |
|
- |
| 4.1.3(Colorfastness to light ) |
- |
1000 |
|
- |
| 4.1.3(Colorfastness to washing) |
- |
600 |
|
- |
| 4.1.3(Color fastness to perspiration) |
- |
600 |
|
- |
| Cl.4.1.3.1( Sewing thread cotton, manmade or blended shall be used for stitching of
upper. For cotton variety thread shall conform to variety No. 28 of IS 1720.
Polyester variety thread shall conform to variety No. 9 of IS 9543. Any other suitable thread shall have breaking load not less than above referred
requirement of specification.
Sewing thread cotton, manmade or blended shall be used for binding of upper. For cotton variety thread shall conform to variety No. 32 of IS 1720. Polyester variety thread shall conform to variety No. 5 of IS 9543.
Any other suitable thread shall have breaking load not less than above referred
requirement of specification.') |
- |
600 |
|
- |
| Cl.4.1.3.2 (IS 2454 : 1985)
IS 765 : 1979
IS 971 : 1966( The colour of the threads shall be as agreedto between the purchaser and the supplier. The dyed threads shall conform to the following requirements or IS 686 : 1985'.) |
- |
1000 |
|
- |
| 4.1.4(Size ) |
- |
400 |
|
- |
| 4.1.4(Thickness) |
- |
1000 |
|
- |
| 4.1.5(Length ) |
- |
400 |
|
- |
| 4.1.5(Breaking Load ) |
- |
600 |
|
- |
| 4.1.5(Sulpher dyes content ) |
- |
1000 |
|
- |
| 4.1.6(Relative density) |
- |
600 |
|
- |
| 4.1.6(Hardness ) |
- |
1000 |
|
- |
| 4.1.6(Flexing resistance test) |
- |
1200 |
|
- |
| 4.1.6(Hardness (after accelerated )) |
- |
2000 |
|
- |
| 4.1.6(Tensile strength) |
- |
1000 |
|
- |
| 4.1.6(Elongation at break ) |
- |
1000 |
|
- |
| 4.1.6(Compression set ) |
- |
1500 |
|
- |
| 4.1.6.2(Tensile after ageing ) |
- |
7500 |
|
- |
| 4.1.6.2(Elongation at break after ageing ) |
- |
1000 |
|
- |
| 4.1.6.2(Ageing) |
- |
6500 |
|
- |
| 4.1.6.2(Thickness of components ) |
- |
1000 |
|
- |
| Cl.4.1.6.3 Thickness of components
in Table 6.(Individual components of the shoes shall comply with
the thickness and material requirements prescribed
in Table 6.) |
- |
1000 |
|
- |
| 4.2(Design ) |
- |
600 |
|
- |
| 4.3(Leg Height ) |
- |
400 |
|
- |
| Cl.'4.3.2( Back of the upper shall be reinforced with a strip of upper material when
there is a seam.') |
- |
600 |
|
- |
| Cl.4.3.3( The counter shall be stitched at the back, set from bottom of lining and bound flat on top edge
with white/scoured binding material cut in bias and formed as a tape. T ) |
- |
600 |
|
- |
| Cl.4.3.4 (The vantp shall be strengthened with a rubber
toe-cap (see Fig. 1).) |
- |
600 |
|
- |
| Cl.4.3.5( Five pairs of eyelets shall be fitted in each
shoe. The eyelets shall be properly clenched without
any distortion. It shall properly match the colour of
the upper canvas, or as agreed to between the purchaser
and the supplier.) |
- |
600 |
|
- |
| Cl.4.3.6( The shoes shall be free from folds, wrinkles in the upper, blisters, embedded foreign matters and
excessive surface markings. In appearance, general workmanship, finish and all other respects, not defined
in the standard, the shoes shall be similar to the
sample approved by the purchaser, if any) |
- |
600 |
|
- |
| CL.4.3.7( The soles shall be of even substance and ofone layer only.) |
- |
600 |
|
- |
| Cl.4.3.8( A rubber foxing shall be fixed all round the sole and heel. The colour shall be as agreed to between the purchaser and the supplier. ) |
- |
600 |
|
- |
| Cl.4.3.8(The foxing, not less
than 18 mm wide, shall not extend beyond the edges of the sole at the bottom) |
- |
600 |
|
- |
| 4.4(Contruction ) |
- |
600 |
|
- |
| Cl.4.4 Adhesion Test(From the upper-foxing portion where it is adhered to the canvas, parallel to the waist of sole, cut a strip of length 100 mm and width 8 mm. Separate out
the plies initially by breaking the bond to a length of about 75 mm. Carry out the test on two specimens in accordance with IS 3400 (Part 5) : 1986. There
shall be no further separation within 1 minute at a load of 1 kg for each of the two specimens.) |
- |
650 |
|
- |
| 4.5(Finish ) |
- |
600 |
|
- |
| Cl.4.5 Consolidation Test
IS 3400 (Part 5) : 1986 (From the quarter, cut a strip of 25.0 ± 0.5 mm width along the leagth of the boot
and of sufficient length to permit separation over a length of 75 mm. Carry out the test on two test pieces (one from each odd) at the rate of traverse of 100± 10mm per minute in accordance with IS 3400 (Part 5): 1986 or Static Dead Load
Method as given in Annex C. The individual adhesion value for consolidation test shall not be less than 30N (3.0 kgf) for each of the teat piecea (see Note
under 4.4).') |
- |
600 |
|
- |
| 4.6(Mass ) |
- |
400 |
|
- |
| 4.7(Consolidation test ) |
- |
600 |
|
- |
| 4.8(Adhesion ) |
- |
650 |
|
- |
| Cl.4.1.2 Binding Material(IS 1954 : 1990)
(IS1969 : 1985)(Cotton tape NEWAR used as binding material shall conform to the requirements prescribed in col 3 of
Table 2, when tested in accordance with the methods referred to in col 4 of the table.) |
- |
400 |
|
- |
| 4.1.2(Width ) |
- |
600 |
|
- |
| Cl.4.1.2.1
Anmex B.(Cotton, manmade or blended shall be used as binding material.'
'Coloured cotton tapes shall have fastness to day light of rating as and if agreed
to between the purchaser and the supplier when tested in accordance with IS 686 :
1985. The black tapes shall be free from sulphur dyes when tested in accordance
with Annex B.') |
- |
1000 |
|
- |
| Cl.4.1.3.2 (IS 2454 : 1985)
IS 765 : 1979
IS 971 : 1966( The colour of the threads shall be as agreedto between the purchaser and the supplier. The dyed threads shall conform to the following requirements or IS 686 : 1985'.) |
- |
600 |
|
- |
| 4.1.4(Thickness) |
- |
400 |
|
- |
| 4.1.5(Sulpher dyes content ) |
- |
0 |
|
- |
| 4.1.6(Hardness (after accelerated )) |
- |
1200 |
|
- |
| 4.1.6.2(Ageing) |
- |
2000 |
|
- |
| 4.4(Contruction ) |
- |
650 |
|
- |
| 4.1.1 (canvas )(Breaking Load ) |
- |
1000 |
|
- |
| 4.1.2(Breaking Strength ) |
- |
1000 |
|
- |
| 4.1.3(Single thread breaking load) |
- |
1000 |
|
- |
| 4.1.4(Size ) |
- |
600 |
|
- |
| 4.1.4(Thickness) |
- |
600 |
|
- |
| 4.1.5(Length ) |
- |
600 |
|
- |
| 4.1.5(Breaking Load ) |
- |
1000 |
|
- |
| 4.1.6(Relative density) |
- |
1000 |
|
- |
| 4.1.6(Hardness ) |
- |
600 |
|
- |
| 4.1.6(Flexing resistance test) |
- |
1000 |
|
- |
| 4.1.6(Compression set ) |
- |
600 |
|
- |
| 4.1.6.2(Tensile after ageing ) |
- |
1500 |
|
- |
| 4.1.6.2(Ageing) |
- |
1500 |
|
- |
| 4.1.6.2(Thickness of components ) |
- |
600 |
|
- |
| Cl.4.1.6.3 Thickness of components
in Table 6.(Individual components of the shoes shall comply with
the thickness and material requirements prescribed
in Table 6.) |
- |
600 |
|
- |
| 4.3(Leg Height ) |
- |
600 |
|
- |
| Cl.'4.3.2( Back of the upper shall be reinforced with a strip of upper material when
there is a seam.') |
- |
1000 |
|
- |
| Cl.4.3.3( The counter shall be stitched at the back, set from bottom of lining and bound flat on top edge
with white/scoured binding material cut in bias and formed as a tape. T ) |
- |
1000 |
|
- |
| Cl.4.3.4 (The vantp shall be strengthened with a rubber
toe-cap (see Fig. 1).) |
- |
1000 |
|
- |
| Cl.4.3.5( Five pairs of eyelets shall be fitted in each
shoe. The eyelets shall be properly clenched without
any distortion. It shall properly match the colour of
the upper canvas, or as agreed to between the purchaser
and the supplier.) |
- |
1000 |
|
- |
| Cl.4.3.6( The shoes shall be free from folds, wrinkles in the upper, blisters, embedded foreign matters and
excessive surface markings. In appearance, general workmanship, finish and all other respects, not defined
in the standard, the shoes shall be similar to the
sample approved by the purchaser, if any) |
- |
1000 |
|
- |
| CL.4.3.7( The soles shall be of even substance and ofone layer only.) |
- |
1000 |
|
- |
| Cl.4.3.8( A rubber foxing shall be fixed all round the sole and heel. The colour shall be as agreed to between the purchaser and the supplier. ) |
- |
1000 |
|
- |
| Cl.4.3.8(The foxing, not less
than 18 mm wide, shall not extend beyond the edges of the sole at the bottom) |
- |
1000 |
|
- |
| Cl.4.4 Adhesion Test(From the upper-foxing portion where it is adhered to the canvas, parallel to the waist of sole, cut a strip of length 100 mm and width 8 mm. Separate out
the plies initially by breaking the bond to a length of about 75 mm. Carry out the test on two specimens in accordance with IS 3400 (Part 5) : 1986. There
shall be no further separation within 1 minute at a load of 1 kg for each of the two specimens.) |
- |
1000 |
|
- |
| 4.5(Finish ) |
- |
1000 |
|
- |
| Cl.4.5 Consolidation Test
IS 3400 (Part 5) : 1986 (From the quarter, cut a strip of 25.0 ± 0.5 mm width along the leagth of the boot
and of sufficient length to permit separation over a length of 75 mm. Carry out the test on two test pieces (one from each odd) at the rate of traverse of 100± 10mm per minute in accordance with IS 3400 (Part 5): 1986 or Static Dead Load
Method as given in Annex C. The individual adhesion value for consolidation test shall not be less than 30N (3.0 kgf) for each of the teat piecea (see Note
under 4.4).') |
- |
1000 |
|
- |
| 4.6(Mass ) |
- |
600 |
|
- |
| 4.7(Consolidation test ) |
- |
1000 |
|
- |
|
26 Sep, 2027 |
-
- |
| 5642 |
SGS India Private Limited, Thiruvallur
| 6162436
| IS 15298 : part 4 (2017) |
Personal protective equipment: Part 4 occupational footwear (Second Revision) |
O1, O2, O3, O4, O5 |
80025 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 5.2.2.1(General) |
- |
0 |
|
- |
| 5.2.2.2(Height of upper) |
- |
0 |
|
- |
| 5.2.2.3(Seat region) |
- |
0 |
|
- |
| 5.3.2.1(Construction) |
- |
0 |
|
- |
| 5.3.1.2(Upper/outsole bond strength) |
- |
880 |
|
- |
| 5.3.2.2(Leakproofness) |
- |
800 |
|
- |
| 5.3.2.3(Specific ergonomic features ) |
- |
500 |
|
- |
| 5.3.4.1(Slip resistance) |
- |
1500 |
|
- |
| 5.3.4.2(Slip resistance on ceramic tile floor with sodium lauryl sulphate (SLS) solution) |
- |
1500 |
|
- |
| 5.3.4.3(Slip resistance on steel floor with glycerine ) |
- |
1500 |
|
- |
| 5.3.4.4(Slip resistance on ceramic tile floor with SLS and on steel floor with glycerine ) |
- |
1500 |
|
- |
| 5.3.2.5(Innocuousness ) |
- |
56500 |
|
- |
| 5.4.2.1(Upper) |
- |
0 |
|
- |
| 5.4.2.2(Thickness ) |
- |
0 |
|
- |
| 5.4.2.3(Tear strenth) |
- |
400 |
|
- |
| 5.4.2.4(Tensile properties) |
- |
400 |
|
- |
| 5.4.2.5(Flexing resistance ) |
- |
600 |
|
- |
| 5.4.2.6(Water vapour permeability and coefficient ) |
- |
900 |
|
- |
| 5.4.2.7(pH value ) |
- |
400 |
|
- |
| 5.4.2.8(Hydrolysis) |
- |
3000 |
|
- |
| 5.4.2.9(Chromium VI content ) |
- |
950 |
|
- |
| 5.5.2.1(Tear strength ) |
- |
400 |
|
- |
| 5.5.2.2(Abrasion resistance ) |
- |
900 |
|
- |
| 5.5.2.3(Water vapour permeability and coefficient ) |
- |
900 |
|
- |
| 5.5.2.4(pH value ) |
- |
400 |
|
- |
| 5.5.2.5(Chromium VI content ) |
- |
950 |
|
- |
| 5.6(Tongue ) |
- |
400 |
|
- |
| 5.6.2.1(Tear strength ) |
- |
400 |
|
- |
| 5.6.2.2(pH value ) |
- |
400 |
|
- |
| 5.6.2.3(Chromium VI content ) |
- |
950 |
|
- |
| 5.7.2.1(Insole and insock ) |
- |
0 |
|
- |
| 5.7.2.2(Insole and insock ) |
- |
0 |
|
- |
| 5.7.2.3(Water absorption and desorption ) |
- |
800 |
|
- |
| 5.7.4.1(Abrasion resistance ) |
- |
900 |
|
- |
| 5.7.4.2(Abrasion resistance ) |
- |
900 |
|
- |
| 5.7.2.5(Chromium VI content ) |
- |
950 |
|
- |
| 5.8.2.1(Outsole) |
- |
0 |
|
- |
| 5.8.1.1(Thickness ) |
- |
0 |
|
- |
| 5.8.1.2(Cleated area ) |
- |
0 |
|
- |
| 5.8.1.3(Cleat height) |
- |
240 |
|
- |
| 5.8.2.2(Tear strength ) |
- |
700 |
|
- |
| 5.8.2.3(Abrasion resistance ) |
- |
900 |
|
- |
| 5.8.2.4(Flexing resistance ) |
- |
900 |
|
- |
| 5.8.2.5(Hydrolysis ) |
- |
3000 |
|
- |
| 5.8.2.6(Interlayer bond strength ) |
- |
880 |
|
- |
| 6.2.1.1(Metallic anti-penetration insert ) |
- |
900 |
|
- |
| 6.2.1.1.2(Non-metallic anti-penetration insert used as an insole) |
- |
900 |
|
- |
| 6.2.1.2(Construction) |
- |
0 |
|
- |
| 6.2.1.3(Dimensions ) |
- |
0 |
|
- |
| 6.2.1.4(Flex resistance of penetration-resistant inserts ) |
- |
1000 |
|
- |
| 6.2.1.5.1(Corrosion resistance of penetration-resistant metallic inserts) |
- |
1000 |
|
- |
| 6.2.1.5.2(Penetration-resistant non-metallic inserts) |
- |
1000 |
|
- |
| 6.2.2.1(Conductive footwear) |
- |
1100 |
|
- |
| 6.2.2.2(Antistatic footwear) |
- |
1100 |
|
- |
| 6.2.2.3(Electrically insulating footwear ) |
- |
900 |
|
- |
| 6.2.3.1(Heat insulation of sole complex ) |
- |
600 |
|
- |
| 6.2.3.2(Cold insulation of sole complex) |
- |
600 |
|
- |
| 6.2.2.4(Energy absorption of seat region ) |
- |
500 |
|
- |
| 6.2.2.5(Water resistance ) |
- |
900 |
|
- |
| 6.2.2.6(Ankle protection) |
- |
1000 |
|
- |
| 6.2.7.1(Cut resistance foot wear) |
- |
600 |
|
- |
| 6.2.7.2(Cut resistance foot wear) |
- |
600 |
|
- |
| 6.2.7.3(Resistance to cutting) |
- |
600 |
|
- |
| 6.2.7.4(Pentration resistance) |
- |
600 |
|
- |
| 6.3.2.2(Upper- water penetration) |
- |
600 |
|
- |
| 6.4.2.1(Resistance to hot contact) |
- |
600 |
|
- |
| 6.4.2.2(Resistance to fuel oil) |
- |
600 |
|
- |
|
26 Sep, 2027 |
-
- |
| 5643 |
SGS India Private Limited, Thiruvallur
| 6162436
| IS 15298 : Part 3 (2019) |
Personal protective equipment: Part 3 protective footwear (Second Revision) |
P1, P2, P3, P4, P5 |
82050 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 5.2.2 Table-2(Height of upper) |
- |
0 |
|
- |
| 5.2.3 Table-2(Seat Region) |
- |
0 |
|
- |
| 5.3.1.1 Table-2(Construction) |
- |
0 |
|
- |
| 5.3.1.2 Table-2(Upper/Outsole Bond) |
- |
880 |
|
- |
| 5.3.2.1 Table-2(General) |
- |
0 |
|
- |
| 5.3.2.2 Table-2(Internal Length of toe cap) |
- |
0 |
|
- |
| 5.3.2.3 Table-2(Impact Resistance -T- ) |
- |
750 |
|
- |
| 5.3.2.4 Table-2(Compression) |
- |
750 |
|
- |
| 5.3.2.5 Table-2(Behaviour of toe cap) |
- |
900 |
|
- |
| 5.3.3 Table-2(Leak Proofness) |
- |
800 |
|
- |
| 5.3.4 Table-2(Specific Ergonomic) |
- |
500 |
|
- |
| 5.3.5.2 Table-2(Slip Resistance SRA) |
- |
1500 |
|
- |
| 5.3.5.3 Table-2(Slip Resistance SRB) |
- |
1500 |
|
- |
| 5.3.5.4 Table-2(Slip Resistance SRC) |
- |
1500 |
|
- |
| 5.4.1 Table-2(General) |
- |
0 |
|
- |
| 5.4.2 Table-2(Thickness) |
- |
0 |
|
- |
| 5 4 3 Table-2(Tear Strength) |
- |
400 |
|
- |
| 5.4.4 Table-2(Tensile Properties) |
- |
400 |
|
- |
| 5.4.5 Table-2(Flexing Resistance) |
- |
600 |
|
- |
| 5.4.6 Table-2(Water Vapour Permeability & Coefficient) |
- |
900 |
|
- |
| 5 4.7 Table-2( ) |
- |
400 |
|
- |
| 5 4.8 Table-2(Hydrolysis) |
- |
3000 |
|
- |
| 5.4 9 Table-2(Chrome VI) |
- |
950 |
|
- |
| 5.5.1 Table-2(Tear Strength) |
- |
400 |
|
- |
| 5.5.2 Table-2(Abrasion Resistance) |
- |
900 |
|
- |
| 5.5.3 Table-2(Water Vapour Permeability & Coefficient) |
- |
900 |
|
- |
| 5.5.4 Table-2(pH Value) |
- |
400 |
|
- |
| 5.5.5 Table-2(Chrome VI) |
- |
950 |
|
- |
| 5.6.1 Table-2(Tear Strength) |
- |
400 |
|
- |
| 5.6.2 Table-2(pH Value) |
- |
400 |
|
- |
| 5.6.3 Table-2(Chromium VI) |
- |
950 |
|
- |
| 5.7.1 Table-3(Thickness) |
- |
0 |
|
- |
| 5.7.2 Table-3(pH Value) |
- |
400 |
|
- |
| 5.7.3 Table-3(Water Absorption &) |
- |
800 |
|
- |
| 5.7.4.1 Table-3(Insole Abrasion) |
- |
900 |
|
- |
| 5.7.4.2 Table-3(Abrasion) |
- |
900 |
|
- |
| 5.7.5 Table-3(Chromium VI) |
- |
950 |
|
- |
| 5.8.1 Table-2(Design) |
- |
240 |
|
- |
| 5.8.2 Table-2(Tear Strength) |
- |
700 |
|
- |
| 5.8.3 Table-3(Abrasion Resistance) |
- |
900 |
|
- |
| 5.8.4 Table-3(Flexing Resistance) |
- |
900 |
|
- |
| 5.8.5 Table-3(Hydrolysis) |
- |
3000 |
|
- |
| 5.8.6 Table-2(Interlayer BondStrength) |
- |
880 |
|
- |
| 6.2.1 Table-I8(Penetration Resistance) |
- |
900 |
|
- |
| 6.2.2.1 Table-18(Electrical Properties) |
- |
1100 |
|
- |
| 6.2.2.2 Table-18(Antistatic Footwear) |
- |
1100 |
|
- |
| 6.2.2.3 Table-18(Electrically Insulated) |
- |
900 |
|
- |
| 6.2.3.1 Table-18(Heat Insulated Comp) |
- |
600 |
|
- |
| 6.2.3.2 Table-18(Cold Insulated) |
- |
600 |
|
- |
| 6.2.4 Table-18(Energy Absorption of seat region) |
- |
500 |
|
- |
| 6.2.5 Table-18(Water Resistance) |
- |
900 |
|
- |
| 6.2.7 Table-18(Ankle Protection) |
- |
1400 |
|
- |
| 6.2.8 Table-18(Cut Resistance) |
- |
1400 |
|
- |
| 6.3 Table-18(Water Penetration & Absorption) |
- |
600 |
|
- |
| 6.4.1 Table-18(Resistance to Hot Contact) |
- |
600 |
|
- |
| 6.4.2 Table-18(Resistance to Fuel oil) |
- |
600 |
|
- |
|
26 Sep, 2027 |
-
- |
| 5644 |
SGS India Private Limited, Thiruvallur
| 6162436
| IS 15298 : Part 2 (2016) |
Personal protective equipment: Part 2 safety footwear (Second Revision) |
S1, S2, S3, S4, S5 |
82050 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 5.2,5.2.1, Fig 3(Design,General, IS 15298) |
- |
0 |
|
- |
| 5.2.2, Fig 4(Height of Upper, ISO 20344 , 6.2) |
- |
0 |
|
- |
| 5.2.3, Table 10 ,Design A(Seat Region) |
- |
0 |
|
- |
| 5.3.1.1(Construction) |
- |
0 |
|
- |
| 5.3.1.2(Upper/outer sole bond strength , ISO 20344 , 5.2) |
- |
880 |
|
- |
| 5.3.2.1(General, EN 12568 OF 4.2.2.2) |
- |
0 |
|
- |
| 5.3.2.2,Table 5(Internal length of toecaps , ISO 20344 , 5.3) |
- |
0 |
|
- |
| 5.3.2.3,Table 6(Impact resistance of safety footwear,ISO 20344 , 5.4) |
- |
750 |
|
- |
| 5.3.2.4 ,Table 6(Compression Resistance of safety footwear ,ISO20344 , 5.5) |
- |
750 |
|
- |
| 5.3.2.5.1(Corrosion resistance of metallic toecaps ,ISO20344 , 5.6.2) |
- |
400 |
|
- |
| 5.3.2.5.2(Non metallic toe caps ,EN 12568) |
- |
900 |
|
- |
| 5.3.3(Leak proofness ,ISO 20344 , 5.7) |
- |
800 |
|
- |
| 5.3.4(Specific ergonomic feature ,ISO 20344 , 5.1) |
- |
500 |
|
- |
| 5.3.5.2,Table 7(Slip resistance on ceramic tile floor with sodium lauryl sulphate (NaLS) solution) |
- |
1500 |
|
- |
| 5.3.5.3,Table 8(Slip resistance on steel floor with glycerin) |
- |
1500 |
|
- |
| 5.3.5.4(Slip resistance on ceramic tile floor with NaLS and on steel floor with glycerin) |
- |
1500 |
|
- |
| 5.3.6(Innocuousness) |
- |
58000 |
|
- |
| 5.4.1,Table 10(General) |
- |
0 |
|
- |
| 5.4.2, Table 11(Thickness , ISO 20344 , 6.1 ) |
- |
0 |
|
- |
| 5.4.3, Table 12(Tear Strength, ISO 20344 , 6.3 ) |
- |
400 |
|
- |
| 5.4.4, Table 13(Tensile properties ,ISO 20344 , 6.4.1 ) |
- |
400 |
|
- |
| 5.4.5, Table 14(Flexing resistance ,ISO 20344,6.5) |
- |
600 |
|
- |
| 5.4.6(Water vapour permeability and coefficient,ISO 20344,6.6 & 6.8) |
- |
900 |
|
- |
| 5.4.7(Ph Value ; ISO 20344,6.9) |
- |
400 |
|
- |
| 5.4.8(Hydrolysis ; ISO 20344,6.10) |
- |
3000 |
|
- |
| 5.4.9(Chromium VI content; ISO 17075) |
- |
950 |
|
- |
| 5.5.1,Table 15(Tear Strength, ISO 20344 , 6.3) |
- |
400 |
|
- |
| 5.5.2(Abrasion Resistance ;ISO 20344 , 6.12) |
- |
900 |
|
- |
| 5.5.3(Water vapour permeability and coefficient,ISO 20344,6.6 & 6.8) |
- |
900 |
|
- |
| 5.5.4(Ph Value ; ISO 20344,6.9) |
- |
400 |
|
- |
| 5.5.5(Chromium VI content; ISO 17075) |
- |
950 |
|
- |
| 5.6(Tongue - IS 15298 Part 2 ) |
- |
400 |
|
- |
| 5.6.1,Table 16(Tear Strength, ISO 20344 , 6.3) |
- |
400 |
|
- |
| 5.6.2(Ph Value ; ISO 20344,6.9) |
- |
400 |
|
- |
| 5.6.3(Chromium VI content; ISO 17075) |
- |
950 |
|
- |
| 5.7.1;Table 3(Thickness ; ISO 20344,7.1) |
- |
0 |
|
- |
| 5.7.2(Ph Value ; ISO 20344,6.9) |
- |
400 |
|
- |
| 5.7.3(Water Absorption and desorption ISO 20344,7.2 ) |
- |
800 |
|
- |
| 5.7.4.1(Insole ; ISO 20344,7.3 ) |
- |
900 |
|
- |
| 5.7.4.2(Insocks ; ISO 20344, 6.12) |
- |
900 |
|
- |
| 5.7.5(Chromium VI content; ISO 17075) |
- |
950 |
|
- |
| 5.8.1(Design, IS 15298 Part 2 ) |
- |
0 |
|
- |
| 5.8.1.1, Table 17(Thickness ; ISO 20344, 8.1.2) |
- |
0 |
|
- |
| 5.8.1.2(Cleated area ; ISO 20344 , Fig 38) |
- |
0 |
|
- |
| 5.8.1.3, Table 17(Cleat height; ISO 20344, 8.1) |
- |
240 |
|
- |
| 5.8.2(Tear Strength, ISO 20344 , 8.2) |
- |
700 |
|
- |
| 5.8.3(Abrasion Resistance ;ISO 20344 , 8.3) |
- |
900 |
|
- |
| 5.8.4(Flexing resistance ,ISO 20344,8.4) |
- |
900 |
|
- |
| 5.8.5(Hydrolysis ; ISO 20344,8.5) |
- |
3000 |
|
- |
| 5.8.6(Interlayer bond strength; ISO 20344, 5.2) |
- |
880 |
|
- |
| 6.2.1.1.1(Metallic anti-penetration insert; ISO 20344, 5.8.2) |
- |
900 |
|
- |
| 6.2.1.1.2(Non-metallic anti-penetration insert; ISO 20344, 5.8.3) |
- |
900 |
|
- |
| 6.2.1.2(Consruction) |
- |
0 |
|
- |
| 6.2.1.3(Dimension ; ISO 20344, 5.8.1) |
- |
0 |
|
- |
| 6.2.1.4(Flex resistance of penetration -resistant insert ; ISO 20344,5.9) |
- |
1000 |
|
- |
| 6.2.1.5.1(Corrosion resistance of penetration -resistant metallic insert - ISO 20344, 5.6.3 &5.6.1) |
- |
1000 |
|
- |
| 6.2.1.5.2(Penetration -resistant non-metallic insert ; EN 12568,6.4&7.4) |
- |
1000 |
|
- |
| 6.2.2.1 (Conductive footwear ; ISO 20344,5.10 & 5.10.3.3) |
- |
1100 |
|
- |
| 6.2.2.2(Antistatic footwear ; ISO 20344,5.10) |
- |
1100 |
|
- |
| 6.2.2.3(Electrically insulating footwear; EN 50321) |
- |
900 |
|
- |
| 6.2.3.1(Hear insulation of sole complex; ISO 20344,5.12 ;Annex B) |
- |
600 |
|
- |
| 6.2.3.2(Cold insulation of sole complex; ISO 20344,5.13) |
- |
600 |
|
- |
| 6.2.4(Energy absorption of seat region; ISO 20344,5.14) |
- |
500 |
|
- |
| 6.2.5(Water resistance ; 5.15.1 & 5.15.2) |
- |
900 |
|
- |
| 6.2.6.1(Construction) |
- |
0 |
|
- |
| 6.2.6.2 , Table 19(Impact resistance of metatarsal protective device,ISO 20344 , 5.16) |
- |
1400 |
|
- |
| 6.2.7 (Ankle protection ; ISO 20344 , 5.17) |
- |
1400 |
|
- |
| 6.2.8.1(Design) |
- |
0 |
|
- |
| 6.2.8.2(Construction) |
- |
0 |
|
- |
| 6.2.8.3,EN 388(Resistance to cutting ,EN 388) |
- |
1000 |
|
- |
| 6.2.8.4(Penetration Resistance) |
- |
1000 |
|
- |
| 6.3(Upper--Water penetration and absorption ; ISO 20344 , 5.13) |
- |
600 |
|
- |
| 6.4.1(Resistance to hot contact ; ISO 20344 , 8.7) |
- |
600 |
|
- |
| 6.4.2(Resistance to fuel oil ; ISO 20344 , 8.6.1& 8.6.2 ; ) |
- |
600 |
|
- |
|
26 Sep, 2027 |
-
- |
| 5645 |
SGS India Private Limited, Thiruvallur
| 6162436
| IS 16186 (2014) |
Textiles - Light weight jute sacking bags for packing 50 kg foodgrains - Specification |
- |
5400 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4.1 & 5.1, Table 1(Dimension-IS 9113 (Cl.8.3.2)) |
- |
0 |
|
- |
| 4.1 & 5.1, Table 1(Ends /dm-IS 9113 (Cl.8.4.2)) |
- |
0 |
|
- |
| 4.1 & 5.1, Table 1(Warpway -IS 9113 (Cl.8.6.2)) |
- |
0 |
|
- |
| 4.1 & 5.1, Table 1(Weftway-IS 9113 (Cl.8.6.2)) |
- |
0 |
|
- |
| 4.1 & 5.1, Table 1(Average Breaking Strength in N) |
- |
0 |
|
- |
| 4.1 & 5.1, Table 1(Corrected Mass/Bag,g-IS 9113 (Cl.8.5.2)) |
- |
0 |
|
- |
| 4.1 & 5.1, Table 1(Average Seam Strength in N-IS 9113 (Cl.8.7)) |
- |
0 |
|
- |
| 4.1 & 5.1, Table 1(Moisture Regain, Percent-IS 9113 (Cl.8.2)) |
- |
0 |
|
- |
| 4.1 & 5.1, Table 1(Oil content, Percent-IS 9113 (Cl.8.5.2)) |
- |
0 |
|
- |
|
26 Sep, 2027 |
-
- |
| 5646 |
SGS India Private Limited, Thiruvallur
| 6162436
| IS 9473 (2002) |
Respiratory protective devices - Filtering half masks to protect against particles - Specification (First Revision) |
- |
191000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl 5.1(Material) |
- |
1000 |
|
- |
| Cl 5.2(Cleaning and Disinfecting) |
- |
1000 |
|
- |
| Cl 5.3(Practical Performance Test) |
- |
6500 |
|
- |
| Cl 5.4(Leakage) |
- |
0 |
|
This test clause number was reported 5.4.1 & 5.4.2 |
| Cl 5.5(Compatibility with Skin) |
- |
2000 |
|
- |
| Cl 5.6(Flammability) |
- |
3000 |
|
- |
| Cl 5.7(Carbon Dioxide Content of the Inhalation Air) |
- |
6500 |
|
- |
| Cl 5.8(Head Harness) |
- |
2000 |
|
- |
| Cl 5.9(Field of Vision) |
- |
2000 |
|
- |
| Cl 5.10(Inhalation and Exhalation Valves) |
- |
6000 |
|
- |
| Cl 5.11(Breathing Resistance) |
- |
5000 |
|
- |
| Cl 5.13(De-mountable Parts) |
- |
1000 |
|
- |
| 5.4.1(Total Inward Leakage
(AR-5 Samples)
) |
- |
25000 |
|
- |
| 5.4.2(Penetration of Filter Material (AR-3
Samples)
) |
- |
130000 |
|
- |
|
26 Sep, 2027 |
-
- |
| 5647 |
SIIR, Delhi Shriram Institute For Industrial Research
| 8102006
| IS 2566 (1993) |
Textiles – B-twill jute bags for packing foodgrains – Specification (third revision) |
- |
13500 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl.5.1 (IS 1954 : 1990)
The bag shall conform to the requirements
specified in Table 1.(i) Dimensions ( see Note ):) |
- |
1500 |
|
Less 30% discount |
| Cl.5.1 1& Cl.8.5.2 of
IS 9113 : 1993
The bag shall conform to the requirements
specified in Table (Corrected mass per bag, g:) |
- |
1500 |
|
Less 30% discount |
| Cl.5.1 (IS 1963 : 1990)
The bag shall conform to the requirements
specified in Table 1.(Ends per dm) |
- |
1500 |
|
Less 30% discount |
| Cl.5.1 (IS 1963 : 1990)
The bag shall conform to the requirements
specified in Table 1.(Picks per dm) |
- |
1500 |
|
Less 30% discount |
| Cl.5.1 (IS 1969 : 1990)
The bag shall conform to the requirements
specified in Table 1.(Breaking load of cloth ( Min )
( revelled strip method.
10 × 20 cm ):) |
- |
5000 |
|
Less 30% discount |
| Cl.5.1 (IS 9030 : 1990)
The bag shall conform to the requirements
specified in Table 1.(Scam breaking load ( Min )
( revelled strip method,
5 × 20 cm ) N ( kgf )) |
- |
2500 |
|
Less 30% discount |
|
31 Dec, 2026 |
-
- |
| 5648 |
Atmy Analytical Labs Private Limited (Unit-2), Greater Noida
| 8176106
| IS 16544 (2016) |
All glass evacuated tubes solar water heating system |
All |
74900 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 6.1(Pre-Conditioning Test) |
- |
4500 |
|
- |
| 6.2.1 (Annex - B)(Exterior Test) |
- |
3500 |
|
- |
| 6.2.2 (Annex - C)(Leakage Test) |
- |
4500 |
|
- |
| 6.2.3 (Annex - D)(Stagnation Test) |
- |
18500 |
|
- |
| 6.2.4 (Annex - E)(External Thermal Shock Test) |
- |
15800 |
|
- |
| 6.2.5 (Annex - F)(Internal Thermal Shock Test) |
- |
15800 |
|
- |
| 6.2.6(Thermal Performance Test) |
- |
15700 |
|
- |
| 6.2.7() |
- |
4500 |
|
- |
| 5(General Requirements) |
- |
10500 |
|
- |
| 6.1(Pre-Conditioning Test) |
- |
0 |
|
- |
| 6.2.1 (Annex - B)(Exterior Test) |
- |
0 |
|
- |
| 6.2.2 (Annex - C)(Leakage Test) |
- |
0 |
|
- |
| 6.2.3 (Annex - D)(Stagnation Test) |
- |
0 |
|
- |
| 6.2.4 (Annex - E)(External Thermal Shock Test) |
- |
0 |
|
- |
| 6.2.5 (Annex - F)(Internal Thermal Shock Test) |
- |
0 |
|
- |
| 6.2.6(Thermal Performance Test) |
- |
0 |
|
- |
| 6.2.7() |
- |
0 |
|
- |
| 5(General Requirements) |
- |
0 |
|
- |
|
08 Feb, 2027 |
-
Included w.e.f 24.03.2025 |
| 5649 |
SIIR, Delhi Shriram Institute For Industrial Research
| 8102006
| IS 4751 (2023) |
Potassium metabisulphite food grade - Specification |
- |
21000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 3.1(Description) |
- |
500 |
|
Rebate 30% Discount |
| 3.2(Identification Test) |
- |
2000 |
|
Rebate 30% Discount |
| 3.2.1(Acidicty to solution of phenol red) |
- |
2000 |
|
Rebate 30% Discount , Charges of Acidity ton solution of phenol red , Decolourize solution of iodine , Test for Potassium ,Test for Sulphite are included in the charges of identification = 2000rs |
| 3..2.2(Decolourize solution of iodine) |
- |
2000 |
|
Rebate 30% Discount , Charges of Acidity ton solution of phenol red , Decolourize solution of iodine , Test for Potassium ,Test for Sulphite are included in the charges of identification = 2000rs |
| 3.2.3.1(Test for Potassium) |
- |
2000 |
|
Rebate 30% Discount , Charges of Acidity ton solution of phenol red , Decolourize solution of iodine , Test for Potassium ,Test for Sulphite are included in the charges of identification = 2000rs |
| 3.2.3.2(Test for Sulphite) |
- |
2000 |
|
Rebate 30% Discount , Charges of Acidity ton solution of phenol red , Decolourize solution of iodine , Test for Potassium ,Test for Sulphite are included in the charges of identification = 2000rs |
| 3.3 Table 1(i)(Purity, as K₂S₂O₅) |
- |
2500 |
|
Rebate 30% Discount |
| 3.3 Table 1(ii)(Water insoluble matter) |
- |
1000 |
|
Rebate 30% Discount |
| 3.3 Table 1(iii)(Thiosulphate) |
- |
1000 |
|
Rebate 30% Discount |
| 3.3 Table 1(iv)(Arsenic (as As)) |
- |
2000 |
|
Rebate 30% Discount |
| 3.3 Table 1(v)(Iron (as Fe)) |
- |
1000 |
|
Rebate 30% Discount |
| 3.3 Table 1(vi)(Selenium (as Se)) |
- |
1000 |
|
Rebate 30% Discount |
| 3.3 Table 1(viii)(Lead (as Pb)) |
- |
1000 |
|
Rebate 30% Discount |
| 3.3 Table 1(vii)(pH) |
- |
1000 |
|
Rebate 30% Discount |
|
31 Dec, 2026 |
-
- |
| 5650 |
SIIR, Delhi Shriram Institute For Industrial Research
| 8102006
| IS 10508 (2020) |
Phosphoric Acid, Food Grade - Specification ( Second Revision ) |
- |
7000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Clause 3.3, Table-1 (ix)(Copper (as Cu) mg/kg, Max) |
- |
1000 |
|
Rebate 30% Discount |
| Clause 3.3, Table-1 (x)(Tin, mg/kg, Max) |
- |
1000 |
|
Rebate 30% Discount |
| Clause 3.3, Table-1 (xi)(Cadmium(as Cd), mg/kg, Max) |
- |
1000 |
|
Rebate 30% Discount |
| Clause 3.3, Table-1 (xii)(Mercury, mg/kg, Max) |
- |
2000 |
|
Rebate 30% Discount |
| Clause 3.3, Table-1 (xiii)(Molybdenum (as Mo),) |
- |
1000 |
|
Rebate 30% Discount |
| Clause 3.3, Table-1 (xiv)(Aluminium (as Al)) |
- |
1000 |
|
Rebate 30% Discount |
|
31 Dec, 2026 |
-
- |
| 5651 |
SIIR, Delhi Shriram Institute For Industrial Research
| 8102006
| IS 8249 (2019) |
Zinc sulphate heptahydrate, agricultural grade - Specification (First Revision) |
- |
11000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 3.1(Description) |
- |
500 |
|
30% Discount |
| (Clauses 3.2 and 6.2) Table 1(Zinc (as Zn)) |
- |
2500 |
|
30% Discount |
| (Clauses 3.2 and 6.2) Table 1(Magnesium (as Mg)) |
- |
1000 |
|
30% Discount |
| (Clauses 3.2 and 6.2) Table 1(Copper (as Cu)) |
- |
1000 |
|
30% Discount |
| (Clauses 3.2 and 6.2) Table 1(Lead (as Pb)) |
- |
1000 |
|
30% Discount |
| (Clauses 3.2 and 6.2) Table 1(pH) |
- |
1000 |
|
30% Discount |
| (Clauses 3.2 and 6.2) Table 1(Matter insoluble in water) |
- |
1000 |
|
30% Discount |
| (Clauses 3.2 and 6.2) Table 1(Sulphur (as S)) |
- |
1000 |
|
30% Discount |
| (Clauses 3.2 and 6.2) Table 1(Cadmium (as Cd)) |
- |
1000 |
|
30% Discount |
| (Clauses 3.2 and 6.2) Table 1(Arsenic (as As)) |
- |
1000 |
|
30% Discount |
|
31 Dec, 2026 |
-
- |
| 5652 |
SIIR, Delhi Shriram Institute For Industrial Research
| 8102006
| IS 8887 (2018) |
Bitumen emulsion for roads (Cationic Type) - Specification (Third Revision) |
- |
33000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 6.6.2 Table-1; 1(i)(Residue on 600 micron IS Sieve, (Grad RS-1) IS 8, Annex 9) |
- |
1500 |
|
30 % Discount & Homogeneity Test as per Clause No. 6.1 follow = 3000rs |
| 6.6.2 Table-1; 1(ii) (1)(Viscosity by saybolt furol viscometer, seconds (Grad RS-1), IS 3117) |
- |
1500 |
|
30 % Discount |
| 6.6.2 Table-1; 1(iii)(Coagulation of emulsion at low temperature (Grad RS-1), Annex C) |
- |
2000 |
|
30% Discount |
| 6.6.2 Table-1; 1(iv)(Storage stability after 24 h (Grad RS-1), Annex D) |
- |
2000 |
|
30 % Discount |
| 6.6.2 Table-1; 1(v)(Particle charge (Grad RS-1), Annex E) |
- |
6000 |
|
30 % Discount |
| 6.6.2 Table-1; 1(vi) 1(Coating ability and water resistance:
Coating, dry aggregate (Grade RS-1) Annex F) |
- |
1000 |
|
30 % Discount |
| 6.6.2 Table-1; 1(vii)(Stability to mixing with cement (Grade RS-1) Annex G) |
- |
1500 |
|
30 % Discount |
| 6.6.2 Table-1; 1(viii)(Miscibility with water (Grade RS-1) Annex H) |
- |
1500 |
|
30 % Discount |
| 6.2-Table 1-x)(Distillation in percent volume of distillate recovered at 360°C at
1) 190°C
2) 225°C
3) 260°C
4) 316°C
5) Residue at 360°C, percent, Min) |
- |
3500 |
|
30 % Discount |
| 6.2-Table 1-ix)(Tests on residue:
1) Residue by evaporation, percent, Min
2) Penetration 25°C/100g/5 sec
3) Ductility 27°C/cm, Min
4) Solubility I tricholoethylne, percent by
mass, Min) |
- |
7000 |
|
30 % Discount |
| xi, Table-1(Water content) |
- |
2500 |
|
30 % Discount |
|
31 Dec, 2026 |
-
- |
| 5653 |
SIIR, Delhi Shriram Institute For Industrial Research
| 8102006
| IS 3812 : Part 2 (2013) |
Pulverized Fuel Ash - Part 2 : For Use as Admixture in Cement Mortar and Concrete |
Use as Admixture in cement mortar and concrete |
23095 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Clase No.7.1, Table No.2, Sl.No.i(Fineness-Specific surface by Blaine's permeability method) |
- |
2000 |
|
30% Discount |
| Clase No.7.1, Table No.2, Sl.No.iii(Soundness by autoclave tests) |
- |
2500 |
|
30% Discount |
| 7.1, Table 1(Particles retained on 45 micron IS sieve (wet sieving)) |
- |
2000 |
|
30% Discount |
| 5.1, 6.1, Table 1(Loss on ignition) |
- |
2000 |
|
30% Discount |
| 5.1, 6.1, Table 1(Total chlorides) |
- |
1000 |
|
30% Discount |
| 5.1, 6.1, Table 1(Available alkalies as equivalent sodium oxide (Na2O)) |
- |
1000 |
|
30% Discount |
| 5.1, 6.1, Table 1(Silicon dioxide (SiO2 )) |
- |
2000 |
|
30% Discount |
| 5.1, 6.1, Table 1(Total sulphur as sulphur trioxide (SO3) |
- |
1000 |
|
30% Discount |
| 5.1, 6.1, Table 1(Magnesium oxide (MgO) |
- |
1000 |
|
30% Discount |
| 5.1, 6.1, Table 1(Silicon dioxide (SiO2 ) plus aluminium oxide (Al2O3 ) plus iron oxide (Fe2O3 )) |
- |
6000 |
|
30% Discount |
|
31 Dec, 2026 |
-
- |
| 5654 |
SIIR, Delhi Shriram Institute For Industrial Research
| 8102006
| IS 7933 (2022) |
Specification for Flexible Polyurethane Foam for Domestic Mattresses First Revision |
Type I and Type II |
19000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 5.1(Constituents) |
- |
1500 |
|
Rebate 30% Discount |
| 5.2(appearance and odour) |
- |
1500 |
|
Rebate 30% Discount |
| 5.3(Colour) |
- |
1500 |
|
Rebate 30% Discount |
| 5.4(Dimensions and Tolerances) |
- |
1500 |
|
Rebate 30% Discount |
| 5.6(Indentation Hardness Index (for Type 1 and 2)) |
- |
2500 |
|
Rebate 30% Discount |
| 5.7(Durability (for Type 1 and 2)) |
- |
2000 |
|
Rebate 30% Discount |
| 5.8, Table 1, i)(Density,) |
- |
1500 |
|
Rebate 30% Discount |
| 5.8, Table 1, ii)(Tensile strength) |
- |
2500 |
|
Rebate 30% Discount |
| 5.8, Table 1, iii)(Heat ageing) |
- |
1500 |
|
Rebate 30% Discount |
| 5.8, Table 1, iv)(Compression set) |
- |
3000 |
|
Rebate 30% Discount |
|
31 Dec, 2026 |
-
- |
| 5655 |
SIIR, Delhi Shriram Institute For Industrial Research
| 8102006
| IS 7809 : Part 3 : Sec 1 (1986) |
Specification for pressure sensitive adhesive insulating tapes for electrical purposes: Part 3 requirements or individual materials: Sec 1 plasticized polyvinylchloride tapes with non - Thermosetting adhesive (First Revision) |
- |
23250 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4.6(Flammability ,Cl 6 of IS 7809 (Part 2): 1977) |
- |
2500 |
|
- |
| 4.8(Stability to accelerated ageing ) |
- |
3000 |
|
- |
| 4.9(Insulation resistance test) |
- |
5000 |
|
- |
| 4.7(Electrolytic corrosion) |
- |
7000 |
|
- |
| 3.1(Marking, Cl.9 of IS 7809 (Part 1):1975) |
- |
200 |
|
- |
| 3.1(Marking, Cl.9 of IS 7809 (Part 1):1975) |
- |
200 |
|
- |
| 3.1(Marking, Cl.9 of IS 7809 (Part 1):1975) |
- |
200 |
|
- |
| 3.1(Marking, Cl.9 of IS 7809 (Part 1):1975) |
- |
200 |
|
- |
| 3.1(Marking, Cl.9 of IS 7809 (Part 1):1975) |
- |
200 |
|
- |
| 3.1(Marking, Cl.9 of IS 7809 (Part 1):1975) |
- |
200 |
|
- |
| 3.1(Marking, Cl.9 of IS 7809 (Part 1):1975) |
- |
200 |
|
- |
| 3.1(Marking, Cl.9 of IS 7809 (Part 1):1975) |
- |
200 |
|
- |
| 3.1(Marking, Cl.9 of IS 7809 (Part 1):1975) |
- |
200 |
|
- |
| Cl.No.4 of IS 7809 (Part 1)-1975(Appearance) |
- |
200 |
|
- |
| Cl.No.5 of IS 7809 (Part 1)-1975(Freedom From Deffects) |
- |
200 |
|
- |
| Cl.No.3.2(Width) |
- |
1000 |
|
Charges of Thickness,width,length (Dimension) are same that is Rs=1000/- |
| Cl.No.3.3(Length) |
- |
1000 |
|
Charges of Thickness,width,length (Dimension) are same that is Rs=1000/- |
| Cl.No.3.4(Thickness) |
- |
1000 |
|
Charges of Thickness,width,length (Dimension) are same that is Rs=1000/- |
| Cl.No.4.1(Tensile Strength) |
- |
1500 |
|
- |
| Cl.No.4.2(Adhesion to Steel) |
- |
2000 |
|
- |
| Cl.No.4.3(Adhesion to backing) |
- |
2000 |
|
- |
| Cl.No.4.4(Electric Strength at RT) |
- |
2500 |
|
- |
| Cl.No.4.5(Electric Strength after Humid Conditioning) |
- |
5000 |
|
- |
| Cl.No.4.6(Flammability) |
- |
2500 |
|
- |
|
31 Dec, 2026 |
-
- |
| 5656 |
SIIR, Delhi Shriram Institute For Industrial Research
| 8102006
| IS 2062 (2011) |
Hot rolled medium and high tensile structural steel - Specification (Seventh Revision) |
- |
18231 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl 7(Workmanship) |
- |
1000 |
|
30% DISCOUNT |
| Cl. 10.3 (Cl. 10.3 (Tensile Strength)) |
- |
5000 |
|
30% DISCOUNT |
| Cl. 10.3 (Cl. 10.3 (Yield Stress)) |
- |
0 |
|
Charges of Yield strength & Elongation are included in Tensile charges |
| Cl. 10.3 (Cl. 10.3 (Elongation %)) |
- |
0 |
|
Charges of Yield strength & Elongation are included in Tensile charges |
| Cl 18(Weight) |
- |
1000 |
|
30% DISCOUNT |
| Cl. 15, 16(Width ) |
- |
0 |
|
- |
| Cl. 15, 16(Thickness ) |
- |
0 |
|
- |
| Cl 11.3(Press) |
- |
0 |
|
- |
| Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
2000 |
|
30% DISCOUNT |
| Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
2000 |
|
30% DISCOUNT |
| Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
2000 |
|
30% DISCOUNT |
| Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
2000 |
|
30% DISCOUNT |
| Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
2000 |
|
30% DISCOUNT |
| Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Carbon Equivalent- IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
2000 |
|
30% DISCOUNT |
| Cl 12(Sudden Load Applied) |
- |
1500 |
|
30% DISCOUNT |
| 15(Dimensions AxB) |
- |
1000 |
|
30% DISCOUNT |
| Clause 12(Impact Test) |
- |
11000 |
|
30% DISCOUNT |
| Clause 7(Freedom from Defect) |
- |
1000 |
|
30% DISCOUNT |
| Cl 11.3(Press) |
- |
2500 |
|
30% DISCOUNT |
|
31 Dec, 2026 |
-
- |
| 5657 |
SIIR, Delhi Shriram Institute For Industrial Research
| 8102006
| IS 2830 (2012) |
Carbon steel cast billet ingots, billets, blooms and slabs for re-rolling into steel for general structural purposes - Specification (Third Revision) |
- |
9726 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 6.1(Carbon %) |
- |
3000 |
|
LESS 30% DISCOUNT |
| 6.1(Sulphur %) |
- |
3000 |
|
LESS 30% DISCOUNT |
| 6.1(Phosphorus %) |
- |
3000 |
|
LESS 30% DISCOUNT |
| 6.1(Manganese %) |
- |
3000 |
|
LESS 30% DISCOUNT |
| 6.1( Copper %) |
- |
0 |
|
0 |
| Cl. 10.1 (a)(Macro Examination) |
- |
2500 |
|
LESS 30% DISCOUNT |
| Cl. 10.1 (b)(Sulphur Print) |
- |
3500 |
|
LESS 30% DISCOUNT |
| Clause 10.3(Camber) |
- |
1000 |
|
LESS 30% DISCOUNT |
| Clause 10.2(Bend) |
- |
2500 |
|
LESS 30% DISCOUNT |
| Clause 9(Freedom from Defect) |
- |
500 |
|
LESS 30% DISCOUNT |
| 11(Dimensions) |
- |
1000 |
|
LESS 30% DISCOUNT |
|
31 Dec, 2026 |
-
- |
| 5658 |
SIIR, Delhi Shriram Institute For Industrial Research
| 8102006
| IS 2494 : Part 1 (1994) |
V - Belts - Endless V - Belts for industrial purposes: Part 1 general purpose - Specification (Second Revision) |
- |
16500 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 7.1(Belt Pitch Length) |
- |
1500 |
|
Rebate 30% Discount |
| 10.1(Elongation) |
- |
2500 |
|
Rebate 30% Discount & charges of tensile strength & Elongation are included as same i.e rs=2500/- |
| 10.1(Tensile Strength) |
- |
2500 |
|
Rebate 30% Discount & charges of tensile strength & Elongation are included as same i.e rs=2500/- |
| 7.2(Test Matched Belts) |
- |
2000 |
|
Rebate 30% Discount |
| 5 & 11(Test Belt ride position of top surface of belt with respect to top of pully groove.) |
- |
1500 |
|
Rebate 30% Discount |
| Clause 5 Table 1(Nominal Pitch Width (Wp)) |
- |
1500 |
|
Rebate 30% Discount |
| Clause 5 Table 1(Nominal Height (T)) |
- |
1500 |
|
Rebate 30% Discount |
| Clause 5 Table 1(Nominal Included Angle (A)) |
- |
2500 |
|
Rebate 30% Discount |
| 5 Table 1(Cross sectional dimension) |
- |
1500 |
|
Rebate 30% Discount |
| 5 Table 1(Cross sectional dimension) |
- |
2000 |
|
Rebate 30% Discount & This is charges of Belt pitch Length (Clause : 7.1) i.e rs=2000/- |
|
31 Dec, 2026 |
-
- |
| 5659 |
SIIR, Delhi Shriram Institute For Industrial Research
| 8102006
| IS 3589 (2001) |
Steel pipes for water and sewage (168.3 To 2540 Mm Outside Diameter) - Specification (Third Revision) |
- |
31000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 8.1 Table 2 Table 3(Carbon Content IS 228) |
- |
2400 |
|
Less 30% discount |
| 8.1 Table 2 Table 3(Sulphur Content IS 228) |
- |
2400 |
|
Less 30% discount |
| 8.1 Table 2 Table 3(Manganese Content IS 228) |
- |
2400 |
|
Less 30% discount |
| 8.1 Table 2 Table 3(Phosphorus Content IS 228) |
- |
2400 |
|
Less 30% discount |
| 8.1(CE) |
- |
2400 |
|
Less 30% discount |
| 9.1(Tensile test-Strength) |
- |
5000 |
|
Less 30% discount |
| 9.1(Tensile test- Elongation) |
- |
0 |
|
Less 30% discount & Charges of Yield & elongation are included in tensile test charges |
| 9.3(Guided bend test(For SAW Pipes)) |
- |
2500 |
|
Less 30% discount |
| 9.2.1(Flattening test for
ERW pipes ) |
- |
2500 |
|
Less 30% discount |
| 9.3(Guided Bend Test
(for SAW Pipes)) |
- |
0 |
|
- |
| 11.1, Table 5.(Outside Diameter (OD)) |
- |
2000 |
|
Less 30% discount , Dimension Charges |
| 12.3.3(Ovality) |
- |
1000 |
|
Less 30% discount |
| 12.5(Strightness) |
- |
1000 |
|
Less 30% discount |
| 14.1(Visual inspection, Appearance and Workmanship) |
- |
500 |
|
Less 30% discount and Galvanized (mass of Zinc coating = 3000 with 30% Discount) , Joint and End =1000 with 30% discount , Length = 500 with 30% discount |
| 9.1(Tensile test-Yield Strength) |
- |
0 |
|
Less 30% discount & Charges of Yield & elongation are included in tensile test charge |
| 11.1, Table 5.(Mass) |
- |
2000 |
|
Less 30% discount , Dimension & Mass charges |
|
31 Dec, 2026 |
-
Cl 10 Hydraulic pressure test. Scope restricted upto 1200mm. |
| 5660 |
SIIR, Delhi Shriram Institute For Industrial Research
| 8102006
| IS 694 (2010) |
Polyvinyl chloride insulated unsheathed and sheathed cables/cords with rigid and flexible conductor for rated voltages up to and including 450/750 v (Fourth Revision) |
- |
27938 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Table 1 iii) c) 2)(Loss of mass- Insulation ) |
- |
1000 |
|
Charges of LOI for Insulation |
| 5.3(Thickness of Insulation) |
- |
500 |
|
Insulation & sheath |
| 9.1(Ovality) |
- |
500 |
|
Insulation & sheath |
| 10.4(Flammability test- Unaffected portion) |
- |
750 |
|
- |
| 10.4(Flammability test-Burning after flame removal) |
- |
750 |
|
- |
| Table 1 iii) c) 5)(Heat shock-Insulation ) |
- |
500 |
|
- |
| 10.1(HV (water immersion)) |
- |
2000 |
|
- |
| Table 1 iii) c) 6)(Hot deformation - Indentation depth- Insulation) |
- |
500 |
|
- |
| table 1 e) 3) (IR constant- max. Temp) |
- |
1500 |
|
- |
| table 1 e) 3) (IR constant- Room temp ) |
- |
1500 |
|
- |
| table 1 e) 3) (Volume Resistivity - Room temp ) |
- |
1500 |
|
- |
| table 1 e) 3) (Volume Resistivity - Maximum temp) |
- |
1500 |
|
- |
| 10.5(Oxygen index) |
- |
1000 |
|
- |
| 4.2(Conductor resistance test) |
- |
1000 |
|
- |
| Table 1 iii) d) 2)(Loss of mass- Sheath ) |
- |
1000 |
|
Charges of LOI for sheath |
| 10.7(Temperature index) |
- |
7500 |
|
- |
| Table 1 iii) c) 3)(Tensile strength (After ageing)) |
- |
4000 |
|
- |
| Table 1 iii) c) 1)(Tensile strength (Without ageing)) |
- |
1000 |
|
- |
| Table 1 iii) c) 1)(Elongation (Without ageing)) |
- |
1000 |
|
- |
| Table 1 iii) c) 3)(Elongation (After ageing)) |
- |
0 |
|
- |
| 4.1(Tensile test (for Al)- After Stranding) |
- |
1000 |
|
- |
| 10.6(Halogen evolution) |
- |
2000 |
|
- |
| 10.8(Smoke density rating) |
- |
1500 |
|
- |
| 4.1(Wrapping test (for Al)) |
- |
1000 |
|
- |
| 10.11(Persulphate Test ) |
- |
1000 |
|
- |
| Table 1 iii) c) 9)(Cold impact for insulation) |
- |
1000 |
|
- |
| Table 1 iii) c) 8)(Cold bend for insulation) |
- |
1000 |
|
- |
| 10.9(Additional ageing test (OU cables only) -HV test (at 60±3oC)) |
- |
10500 |
|
Ageing Test + HV = 3500+7000=10500rs |
| Table 1 iii) c) 7)(Thermal stability- Insulation ) |
- |
1000 |
|
- |
| Table 1 iii) d) 4)(Shrinkage- Sheath ) |
- |
1000 |
|
- |
| 4.1(Annealing test (for copper)) |
- |
1000 |
|
- |
|
31 Dec, 2026 |
-
- |
| 5661 |
SIIR, Delhi Shriram Institute For Industrial Research
| 8102006
| IS 1251 (1988) |
Specification for zinc phosphide, technical |
- |
10000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 2.1(Description) |
- |
1000 |
|
30% Discount |
| 2.2 Table 2 ii (Zinc Content) |
- |
2000 |
|
30% Discount |
| 2.2 Table 2 iii (Sieving Requirements: Material passing through 150 micron IS Sieve) |
- |
1000 |
|
30% Discount |
| 2.2 Table 2 i (Zinc Phosphide (Zn3P2)) |
- |
5000 |
|
30% Discount |
| 2.2 Table 2 iv (Sieving Requirements: Material passing through 106 micron IS Sieve) |
- |
0 |
|
- |
| 2.3(Freedom from sulphides) |
- |
1000 |
|
30% Discount |
|
31 Dec, 2026 |
-
- |
| 5662 |
SIIR, Delhi Shriram Institute For Industrial Research
| 8102006
| IS 1554 : Part 1 (1988) |
Specification for pvc insulated (Heavy Duty) electric cables: Part 1 for working voltages up to and including 1100 v (Third Revision) |
- |
26513 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 15.1 a) 1)(Tests on conductor : Annealing test ( for copper )) |
- |
1000 |
|
- |
| 15.1 d)2)(Phyaical tests for insulation- Ageing in air Oven : Tensile Test) |
- |
4000 |
|
- |
| 16.4(Flammability Test) |
- |
1000 |
|
- |
| 15.1 d)6)(Heat shock test- Insulation ) |
- |
500 |
|
- |
| 15.1 d)6)(Heat shock test- sheath ) |
- |
500 |
|
- |
| 16.5(Oxygen Index Test) |
- |
1000 |
|
- |
| 15.1 d)5)( Loss of mass in air oven- Insulation ) |
- |
500 |
|
- |
| 15.1 d)5)( Loss of mass in air oven- sheath ) |
- |
500 |
|
- |
| 14.4.1(Thickness of Outer Sheath : Unarmowed Cables) |
- |
1000 |
|
- |
| 14.4.2(Thickness of Outer Sheath : Armoured Cables) |
- |
1000 |
|
- |
| 9.2(INSULATION : Thickness of Insulation) |
- |
500 |
|
- |
| 12.3(INNER SHEATH :Thickness of Inner Sheath) |
- |
500 |
|
- |
| 15.1 g)(High voltage test at room temperature) |
- |
2000 |
|
- |
| 16.3.1(High Voltage Test ( Water Immersion Test ) : a.c. Test) |
- |
2000 |
|
- |
| 16.3.2(High Voltage Test ( Water Immersion Test ) : d.c. Test) |
- |
2000 |
|
- |
| 15.1.e(Insulation resistance Test- Insulation resistance At Maximum rated temperature temperature) |
- |
1000 |
|
- |
| 15.1.e(Insulation resistance Test- Insulation resistance constant At Room temperature) |
- |
1000 |
|
- |
| 15.1.e(Insulation resistance Test- Volume Resistivity At Maximum rated temperature temperature) |
- |
1500 |
|
- |
| 15.1.e(Insulation resistance Test- Volume Resistivity At Room temperature) |
- |
1500 |
|
- |
| 15.1 d)4)(Hot deformation : Insulation ) |
- |
750 |
|
- |
| 15.1 d)4)(Hot deformation : Sheath ) |
- |
750 |
|
- |
| 15.1 a) 4)(Tests on conductor : Conductor resistance test) |
- |
1000 |
|
- |
| 15.1 d)3)(Phyaical tests for insulation : Shrinkage ) |
- |
1000 |
|
- |
| 15.1 d)3)(Phyaical tests for Sheath : Shrinkage ) |
- |
1000 |
|
- |
| 16.1(Temperature Index) |
- |
2500 |
|
- |
| 15.1 d)1)(Phyaical tests for insulation : Tensile Test) |
- |
1000 |
|
- |
| 15.1 d)1)(Phyaical tests for insulation : Elongation ) |
- |
1000 |
|
- |
| 15.1 d)2)(Phyaical tests for insulation - Ageing in air oven : Elongation ) |
- |
0 |
|
- |
| 15.1 d)1)(Physical tests for sheath : Tensile stregth ) |
- |
1000 |
|
- |
| 15.1 d)1)(Physical tests for sheath : Elongation ) |
- |
1000 |
|
- |
| 15.1 d)2)(Physical tests for outer sheath- Ageing in air oven : Tensile stregth ) |
- |
0 |
|
- |
| 15.1 d)2)(Physical tests for outer sheath -Ageing in air oven : Elongation ) |
- |
0 |
|
- |
| 15.1 a) 2)(Tensile test (for aluminium) - Before stranding ) |
- |
1000 |
|
- |
| 15.1 a) 2)(Tensile test (for aluminium) - After stranding ) |
- |
1000 |
|
- |
| 13.6 a)(ARMOURING: Tensile Strength) |
- |
1000 |
|
- |
| 13.6 b)(ARMOURING: Elongation ) |
- |
1000 |
|
- |
| 13.6 c)(ARMOURING: Torsion Test (For round wire ) ) |
- |
1000 |
|
- |
| 13.6 d)(ARMOURING: Winding Test(For formed wire)) |
- |
1000 |
|
- |
| 13.6 e)(ARMOURING: Uniformity of zinc coating) |
- |
1000 |
|
- |
| 13.6 f)(ARMOURING: Mass of zinc coating ) |
- |
1000 |
|
- |
| 13.6 g)(ARMOURING: Resistivity) |
- |
1500 |
|
- |
| 15.1 d)7)(Thermal stability- insulation ) |
- |
1000 |
|
- |
| 15.1 d)7)(Thermal stability- Sheath ) |
- |
1000 |
|
- |
| 15.1 a) 3)(Tests on conductor : Wrapping test ( for aluminium )) |
- |
1000 |
|
- |
| 16.9(Test for Halogen Acid Gas Evolution) |
- |
2000 |
|
- |
| 15.4 a)(Cold bend test- Insulation ( Optional test)) |
- |
1000 |
|
- |
| 15.4 a)(Cold bend test- Sheath ( Optional test)) |
- |
1000 |
|
- |
| 15.4 b)(Cold impact test- Insulation ( Optional test)) |
- |
1000 |
|
- |
| 15.4 b)(Cold impact test- Sheath ( Optional test)) |
- |
1000 |
|
- |
| 16.6(Flame Retardance Test on Single Cables) |
- |
1500 |
|
- |
| 13.3(Armouring : Dimensions -Wire Diameter) |
- |
500 |
|
- |
| 13.3(Armouring : Dimensions -Formed wire ) |
- |
500 |
|
- |
|
31 Dec, 2026 |
-
Flame retardance on bunched cable, specific optical density of smoke, smoke density (Cl 151.1, C1 & C2 Category) |
| 5663 |
SIIR, Delhi Shriram Institute For Industrial Research
| 8102006
| IS 2202 : Part 1 (2023) |
WOODEN FLUSH DOOR SHUTTERS SOLID CORE TYPE SPECIFICATION PART 1 PLYWOOD FACE PANELS Seventh Revision |
- |
30000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 6.2(Plywood) |
- |
0 |
|
ECO Mark : This is not a laboratory test. Manufacturer has to provide declaration certificate for ECO Mark. |
| 11.1( Squareness Test - IS 4020 (Pt-2)) |
- |
0 |
|
- |
| 11.1(Thickness - IS 4020 (Pt-2)) |
- |
0 |
|
- |
| 11.1(Width- IS 4020 (Pt-2)) |
- |
0 |
|
- |
| 11.1(Height - IS 4020 (Pt-2)) |
- |
0 |
|
- |
| 11.2( Twist, cupping & wrapping - IS 4020 (Pt-3)) |
- |
0 |
|
- |
| 11.3(Depth of deviation - IS 4020(Pt-4)) |
- |
0 |
|
- |
| 11.4(Impact Indentation Test - IS 4020(Pt-5)) |
- |
0 |
|
- |
| 11.7(Shock Resistance Test -IS 4020(Pt-8)) |
- |
0 |
|
- |
| 11.5(Deflection at maximum load - IS 4020(Pt-6)) |
- |
0 |
|
- |
| 11.6(Deflection of the edge at maximum load - IS 4020(Pt-7)) |
- |
0 |
|
- |
| 11.7(Shock Resistance Test -IS 4020(Pt-8)) |
- |
1500 |
|
LESS 30% REBATE |
| 11.8(Buckling Test - IS 4020(Pt-9)) |
- |
1500 |
|
LESS 30% REBATE |
| 11.9(Slamming Test - IS 4020(Pt-10)) |
- |
1500 |
|
LESS 30% REBATE |
| 11.1(Misuse Test - IS 4020(Pt-11)) |
- |
1500 |
|
LESS 30% REBATE |
| 11.11(Varying Humidity Test - IS 4020(Pt-12)) |
- |
5000 |
|
LESS 30% REBATE |
| 11.12(End Immersion Test - IS 4020(Pt-13)) |
- |
2000 |
|
LESS 30% REBATE |
| 11.13(Knife Test - IS 4020(Pt-14)) |
- |
2000 |
|
LESS 30% REBATE |
| 11.14(Glue Adhesion Test - IS 4020(Pt-15)) |
- |
2000 |
|
LESS 30% REBATE |
| 11.15(Screw Withdrawal Strength - IS 4020 (Pt-16)) |
- |
2000 |
|
LESS 30% REBATE |
| Clause 6.1.3(moisture content) |
- |
1500 |
|
LESS 30% REBATE |
| 7.1.1(CONSTRUCTION-Blockboard Core) |
- |
1000 |
|
LESS 30% REBATE |
| 9.1(Workmanship & Finish) |
- |
1000 |
|
LESS 30% REBATE , charges of Density = 1000rs & Charges of Preservative treatment = 5000rs |
| 11.1(Dimensions - Height) |
- |
200 |
|
LESS 30% REBATE |
| 11.1(Dimensions - Width) |
- |
200 |
|
LESS 30% REBATE |
| 11.1(Dimensions - Thickness) |
- |
200 |
|
LESS 30% REBATE |
| 11.1(Dimensions - Variation in thickness) |
- |
200 |
|
LESS 30% REBATE |
| 11.1(Dimensions - Squareness) |
- |
200 |
|
LESS 30% REBATE |
| 11.2(General Flatness Test) |
- |
1000 |
|
LESS 30% REBATE |
| 11.3(Local Planeness Test) |
- |
500 |
|
LESS 30% REBATE |
| 11.4(Impact Indentation Test) |
- |
2000 |
|
LESS 30% REBATE |
| 11.5(Flexure Test) |
- |
2000 |
|
LESS 30% REBATE |
| 11.6(Edge Loading Test) |
- |
1000 |
|
LESS 30% REBATE |
| 11.7.1(Shock Resistance Test) |
- |
0 |
|
- |
| 11.8(Buckling Test) |
- |
0 |
|
- |
| Clause 11.9(Slamming Test) |
- |
0 |
|
- |
| Clause 11.10(Misuse Test) |
- |
0 |
|
- |
| 11.11(Varying Humidity Test) |
- |
0 |
|
- |
| 11.12(End Immersion Test) |
- |
0 |
|
- |
| 11.13(Knife Test) |
- |
0 |
|
- |
| 11.14(Glue Adhesion Test) |
- |
0 |
|
- |
| 11.15(Screw Withdrawal Resistance Test) |
- |
0 |
|
- |
|
31 Dec, 2026 |
-
- |
| 5664 |
SIIR, Delhi Shriram Institute For Industrial Research
| 8102006
| IS 4246 (2002) |
Domestic gas stoves for use with liquefied petroleum gases - Specification (Fifth Revision) |
- |
24150 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 24 (Annex - E)(Combustion (CO and CO2 ratio)) |
- |
2000 |
|
Less 30% discount & For Complete Testing (Chemical + Mechanical) = 35000rs , For Only Chemical Test = 7500rs , For Only Mechanical Test = 27500rs |
| 4.1(Requirement) |
- |
0 |
|
- |
| 5(Materials) |
- |
10000 |
|
Less 30% discount & For Complete Testing (Chemical + Mechanical) = 35000rs , For Only Chemical Test = 7500rs , For Only Mechanical Test = 27500rs |
| 6(Design for Maintenance) |
- |
500 |
|
Less 30% discount & For Complete Testing (Chemical + Mechanical) = 35000rs , For Only Chemical Test = 7500rs , For Only Mechanical Test = 27500rs |
| 7(Rigidity and Stability) |
- |
500 |
|
Less 30% discount & For Complete Testing (Chemical + Mechanical) = 35000rs , For Only Chemical Test = 7500rs , For Only Mechanical Test = 27500rs |
| 8(Workmanship and Finish) |
- |
500 |
|
Less 30% discount & For Complete Testing (Chemical + Mechanical) = 35000rs , For Only Chemical Test = 7500rs , For Only Mechanical Test = 27500rs |
| 9(Gas Taps) |
- |
1000 |
|
Less 30% discount & For Complete Testing (Chemical + Mechanical) = 35000rs , For Only Chemical Test = 7500rs , For Only Mechanical Test = 27500rs |
| 10(Injector Jets) |
- |
1000 |
|
Less 30% discount & For Complete Testing (Chemical + Mechanical) = 35000rs , For Only Chemical Test = 7500rs , For Only Mechanical Test = 27500rs |
| 11(Burners) |
- |
1000 |
|
Less 30% discount & For Complete Testing (Chemical + Mechanical) = 35000rs , For Only Chemical Test = 7500rs , For Only Mechanical Test = 27500rs |
| 12(Burner Pan Supports) |
- |
1000 |
|
Less 30% discount & For Complete Testing (Chemical + Mechanical) = 35000rs , For Only Chemical Test = 7500rs , For Only Mechanical Test = 27500rs |
| 13.1(Gas Soundness) |
- |
1500 |
|
Less 30% discount & For Complete Testing (Chemical + Mechanical) = 35000rs , For Only Chemical Test = 7500rs , For Only Mechanical Test = 27500rs |
| 14(Gas Inlet Connections) |
- |
1000 |
|
Less 30% discount & For Complete Testing (Chemical + Mechanical) = 35000rs , For Only Chemical Test = 7500rs , For Only Mechanical Test = 27500rs |
| 15(Strength and Rigidity) |
- |
1000 |
|
Less 30% discount & For Complete Testing (Chemical + Mechanical) = 35000rs , For Only Chemical Test = 7500rs , For Only Mechanical Test = 27500rs |
| 16(General Conditions of Test) |
- |
1000 |
|
Less 30% discount & For Complete Testing (Chemical + Mechanical) = 35000rs , For Only Chemical Test = 7500rs , For Only Mechanical Test = 27500rs |
| 17.1.1(Gas Consumption) |
- |
2000 |
|
Less 30% discount & For Complete Testing (Chemical + Mechanical) = 35000rs , For Only Chemical Test = 7500rs , For Only Mechanical Test = 27500rs |
| 18(Ignition and Flame Travel) |
- |
1000 |
|
Less 30% discount & For Complete Testing (Chemical + Mechanical) = 35000rs , For Only Chemical Test = 7500rs , For Only Mechanical Test = 27500rs |
| 19(Flame Stability) |
- |
1000 |
|
Less 30% discount & For Complete Testing (Chemical + Mechanical) = 35000rs , For Only Chemical Test = 7500rs , For Only Mechanical Test = 27500rs |
| 20(Noise Control) |
- |
1000 |
|
Less 30% discount & For Complete Testing (Chemical + Mechanical) = 35000rs , For Only Chemical Test = 7500rs , For Only Mechanical Test = 27500rs |
| 21(Flash Back) |
- |
1000 |
|
Less 30% discount & For Complete Testing (Chemical + Mechanical) = 35000rs , For Only Chemical Test = 7500rs , For Only Mechanical Test = 27500rs |
| 22(Formation of Soot) |
- |
1000 |
|
Less 30% discount & For Complete Testing (Chemical + Mechanical) = 35000rs , For Only Chemical Test = 7500rs , For Only Mechanical Test = 27500rs |
| 23(Resistance to Draught) |
- |
1000 |
|
Less 30% discount & For Complete Testing (Chemical + Mechanical) = 35000rs , For Only Chemical Test = 7500rs , For Only Mechanical Test = 27500rs |
| 24(Combustion) |
- |
2000 |
|
Less 30% discount & For Complete Testing (Chemical + Mechanical) = 35000rs , For Only Chemical Test = 7500rs , For Only Mechanical Test = 27500rs |
| 25(Fire Hazard and Limiting Temperature) |
- |
1000 |
|
Less 30% discount & For Complete Testing (Chemical + Mechanical) = 35000rs , For Only Chemical Test = 7500rs , For Only Mechanical Test = 27500rs |
| 26(Thermal Efficiency) |
- |
2000 |
|
Less 30% discount & For Complete Testing (Chemical + Mechanical) = 35000rs , For Only Chemical Test = 7500rs , For Only Mechanical Test = 27500rs |
|
31 Dec, 2026 |
-
- |
| 5665 |
SIIR, Delhi Shriram Institute For Industrial Research
| 8102006
| IS 269 (2015) |
Ordinary portland cement - Specification (Sixth Revision) |
- |
23366 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 7 Table-3 i.(Fineness) |
- |
1000 |
|
30% Discount |
| 7 Table-3 ii b(Expansion by Autoclave) |
- |
1000 |
|
30% Discount |
| 7 Table-3 ii a(Expansion by Le Chatelier) |
- |
1000 |
|
30% Discount |
| 7 Table-3 iii b(Setting Time Final) |
- |
500 |
|
30% Discount |
| 7 Table-3 iii a(Setting Time Initial) |
- |
500 |
|
30% Discount |
| 7 Table-3 iv a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6) |
- |
1650 |
|
30% Discount |
| 7 Table-3 iv b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6) |
- |
1650 |
|
30% Discount |
| 7 Table-3 iv c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6) |
- |
1700 |
|
30% Discount |
| 6.1 Table-2 i.(Ratio of percentage of lime to percentage of silica, alumina and iron oxide) |
- |
7000 |
|
30% Discount |
| 6 - Table - 1 vi(Loss on ignition - Cl 4.2 of IS 4032:1985) |
- |
1000 |
|
30% Discount |
| 6 - Table - 1 vii(Chloride content - Cl 4.13 of IS 4032:1985) |
- |
1000 |
|
30% Discount |
| 6.1 Table-2 iii.(Insoluble residue) |
- |
1000 |
|
30% Discount |
| 6.1 Table-2 iv(Magnesia) |
- |
2000 |
|
30% Discount |
| 6.1 Table-2 v(Total Sulphur Content calculated as Sulphuric Anhydride) |
- |
1000 |
|
30% Discount |
| 7 Table-3 v(Transverse Strength - IS 4031 Part 8 (Optional)) |
- |
5000 |
|
30% discount |
| 6 - Table - 1 viii(Alkali content as (Na2O + 0.658 K2O) - Cl 4.11 of IS 4032:1985) |
- |
2000 |
|
30% discount |
|
31 Dec, 2026 |
-
- |
| 5666 |
SIIR, Delhi Shriram Institute For Industrial Research
| 8102006
| IS 455 (2015) |
Portland slag cement - Specification |
- |
21280 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl. 7 Table-2(Cl. 7 Table-2 i (Fineness )) |
- |
1000 |
|
30% Discount |
| Cl. 7 Table-2(Cl. 7 Table-2 ii b (Soundness , Autoclave Expansion )) |
- |
1000 |
|
30% Discount |
| Cl. 7 Table-2(Cl. 7 Table-2 ii a (Soundness , Le Chatelier Expansion )) |
- |
1000 |
|
30% Discount |
| Cl. 7 Table-2(Cl. 7 Table-2 iii b (Setting time Final)) |
- |
500 |
|
30% Discount |
| Cl. 7 Table-2(Cl. 7 Table-2 iv a (Compressive Strength 72±1 hr IS)) |
- |
1700 |
|
30% Discount |
| Cl. 7 Table-2(Cl. 7 Table-2 iv b (Compressive Strength 168±2 hr )) |
- |
1650 |
|
30% Discount |
| Cl. 7 Table-2(Cl. 7 Table-2 iv c (Compressive Strength 672±4 hr) ) |
- |
1650 |
|
30% Discount |
| 6 - Table - 1 i(Insoluble residue - Cl 6.9 of IS 4032:1985) |
- |
1000 |
|
30% Discount |
| 6 - Table - 1 ii(Magnesia - Cl 6.8 of IS 4032:1985) |
- |
2000 |
|
30% Discount |
| 6 - Table - 1 iii(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 6.11 of IS 4032:1985) |
- |
1000 |
|
30% Discount |
| 6 - Table - 1 iv(Sulphide sulphur (S) - Cl 6.12 of IS 4032:1985) |
- |
1000 |
|
30% Discount |
| 6 - Table - 1 v(Loss on ignition - Cl 6.2 of IS 4032:1985) |
- |
1000 |
|
30% Discount |
| 6 - Table - 1 vi(Chloride content - Cl 4.13 of IS 4032:1985) |
- |
1000 |
|
30% Discount |
| 6 - Table - 1 vii( Alkali content as (Na2O + 0.658 K2O) - Cl 4.11 of IS 4032:1985) |
- |
2000 |
|
30% Discount |
| 7 Table 1 iii a(Setting Time ( by Vicat Apparatus ),Initial
IS 4031(Part 5)) |
- |
500 |
|
30% Discount |
| 7 Table 1 v(Transverse strength (optional)
IS 4031(Part 8) ) |
- |
5000 |
|
30% Discount |
|
31 Dec, 2026 |
-
- |
| 5667 |
SIIR, Delhi Shriram Institute For Industrial Research
| 8102006
| IS 1489 (Part 1) (2015) |
Portland pozzolana cement - Specification: Part 1 fly Ash Based |
- |
21620 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 7 -Table 2- i(Fineness 4031 Part 2) |
- |
1000 |
|
LESS 30% REBATE |
| 7 -Table 2- ii- b(Expansion by Autoclave- 4031 Part 3) |
- |
1000 |
|
LESS 30% REBATE |
| 7 -Table 2- ii- a(Expansion by Le Chatelier- 4031 Part 3) |
- |
1000 |
|
LESS 30% REBATE |
| 7 -Table 2-iii- b(Setting Time Final- 4031 Part 5) |
- |
500 |
|
LESS 30% REBATE |
| 7 -Table 2- iii- a(Setting Time Initial- 4031 Part 5) |
- |
500 |
|
LESS 30% REBATE |
| 7 -Table 2- iv- a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6) |
- |
1650 |
|
LESS 30% REBATE |
| 7 -Table 2- iv- b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6) |
- |
1650 |
|
LESS 30% REBATE |
| 7 -Table 2- iv- c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6) |
- |
1700 |
|
LESS 30% REBATE |
| 7 -Table 2- vi(Drying Shrinkage- IS 4031 Part 10) |
- |
4000 |
|
LESS 30% REBATE |
| 6 - Table - 1 i(Insoluble residue - Cl 7.4 of IS 4032:1985) |
- |
1000 |
|
LESS 30% REBATE |
| 6 - Table - 1 ii(Magnesia - Cl 7.2 of IS 4032:1985) |
- |
2000 |
|
LESS 30% REBATE |
| 6 - Table - 1 iii(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 7.3 of IS 4032:1985) |
- |
1000 |
|
LESS 30% REBATE |
| 6 - Table - 1 iv(Loss on ignition - Cl 7.1 of IS 4032:1985) |
- |
1000 |
|
LESS 30% REBATE |
| 6 - Table - 1 v(Chloride content - Cl 4.13 of IS 4032:1985) |
- |
1000 |
|
LESS 30% REBATE |
| 6 - Table - 1 vi( Alkali content as (Na2O + 0.658 K2O) - Cl 4.11 of IS 4032:1985) |
- |
2000 |
|
LESS 30% REBATE |
| 7 -Table 2- v(Transverse Strength - IS 4031 Part 8 (Optional)) |
- |
5000 |
|
Less 30% Rebate |
|
31 Dec, 2026 |
-
- |
| 5668 |
SIIR, Delhi Shriram Institute For Industrial Research
| 8102006
| IS 1011 (2002) |
Biscuits - Specification (Fourth Revision) |
- |
4300 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 6.1(General Requirement) |
- |
500 |
|
LESS 30% REBATE |
| 6.3 Table 2 i (Moisture) |
- |
650 |
|
LESS 30% REBATE |
| 6.3 Table 2 ii (Acid insoluble ash (on dry basis)) |
- |
650 |
|
LESS 30% REBATE |
| 6.3 Table 2 iii (Acidity of extracted fat (as oleic acid)) |
- |
2500 |
|
LESS 30% REBATE |
|
31 Dec, 2026 |
-
- |
| 5669 |
SIIR, Delhi Shriram Institute For Industrial Research
| 8102006
| IS 9825 (2003) |
Chlorine tablets - Specification (Second Revision) |
- |
8500 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl.4.2(Description) |
- |
1000 |
|
LESS 30 % DISCOUNT & For Formulation (Clause No. 4.1) = 500 rs with 30 % Discount |
| Cl.4.3(Size (Mass of tablet)) |
- |
1000 |
|
LESS 30 % DISCOUNT |
| Cl.4.4(Moisture (Annex B)) |
- |
1000 |
|
Less 30% Discount |
| Cl.4.3(Available Chlorine (Annex A)) |
- |
2500 |
|
LESS 30 % DISCOUNT |
| Clause 5(Shelf Life) |
- |
2500 |
|
LESS 30 % DISCOUNT |
| Cl.4.3(Size (Mass of tablet)) |
- |
0 |
|
repeated |
|
31 Dec, 2026 |
-
- |
| 5670 |
SIIR, Delhi Shriram Institute For Industrial Research
| 8102006
| IS 2888 (2004) |
Toilet soap - Specification (Third Revision) |
- |
9675 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 5.5, Table-1 (i), Grade-1(Total fatty matter, IS 286) |
- |
2500 |
|
30% Discount |
| 5.5, Table-1 (ii), Grade-1, Gr-2 & Gr-3(Rosin acids, percent by mass of total fatty matter, IS 286 ) |
- |
2500 |
|
30% Discount & Charges of Description = 500rs & Charges of cresylic acid = 1500 rs |
| 5.5, Table-1 (iii), Grade-1, Gr-2 & Gr-3(Free caustic alkali, as sodium hydroxide (NaOH), IS 286) |
- |
950 |
|
30% Discount |
| 5.5, Table-1 (iv), Grade-1(Matter insoluble in alcohol, IS 286) |
- |
1500 |
|
30% Discount |
| 5.5, Table-1 (v), Grade-1, Grade-2 & Grade-3(Chloride (as sodium chloride), IS 286) |
- |
1500 |
|
30% Discount |
| 5.5, Table-1 (vi), Grade-1, Grade-2 & Grade-3(Free carbonated alkali) |
- |
2500 |
|
30% Discount |
| 5.5, Table-1 (vii), Grade-1(Lather) |
- |
650 |
|
30% Discount |
|
31 Dec, 2026 |
-
- |
