| 6031 |
URS PRODUCTS AND TESTING PVT. LTD. (A29), NOIDA
| 8168906
| IS 16221 : Part 2 (2015) |
Safety of power converters for use in photovoltaic power systems: Part 2 particular requirements for inverters |
- |
1300000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4(General Test Requireements) |
- |
2000 |
|
- |
| 5(Marking and documentation) |
- |
3000 |
|
- |
| 6(Environmental requirements and conditions) |
- |
35000 |
|
- |
| 7(Protection against electric shock and energy hazards) |
- |
50000 |
|
- |
| 8(Protection against Mechanical Hazards) |
- |
50000 |
|
- |
| 9(Protection against Fire Hazards) |
- |
50000 |
|
- |
| 10(Protection against Sonic Pressure Hazards) |
- |
50000 |
|
- |
| 11(Protection against Liquid Hazards) |
- |
50000 |
|
- |
| 12(Protection against Chemical Hazards) |
- |
50000 |
|
- |
| 13(Physical Requirements) |
- |
50000 |
|
- |
| 14(Components) |
- |
50000 |
|
- |
| 14(Components) |
- |
50000 |
|
- |
| 6.4(UV exposure) |
- |
35000 |
|
- |
| 13.6.4(UV Resistance) |
- |
35000 |
|
- |
| Annex J(Ultraviolet light conditioning test) |
- |
25000 |
|
- |
| 9.1.4.3(Hot flaming oil test) |
- |
50000 |
|
- |
| Clause No. 4.3(Thermal testing) |
- |
50000 |
|
- |
| Clause No. 4.4(Testing in single fault condition) |
- |
35000 |
|
- |
| 4.5(Humidity preconditioning) |
- |
35000 |
|
- |
| 4.7(Electrical rating tests) |
- |
50000 |
|
- |
| 4.8(Additional tests for grid interactive inverters) |
- |
25000 |
|
- |
| 4.4.4.15.1(Fault-tolerance of residual current monitoring) |
- |
25000 |
|
- |
| 4.4.4.15.2(Fault-tolerance of automatic disconnecting means) |
- |
25000 |
|
- |
| 4.4.4.16(Stand-alone inverters – Load transfer test) |
- |
35000 |
|
- |
| 4.4.4.17(Cooling system failure – Blanketing test) |
- |
20000 |
|
- |
| 4.7.3(Measurement requirements for AC output ports for stand-alone inverters) |
- |
20000 |
|
- |
| 4.7.4(Stand-alone Inverter AC output voltage and frequency) |
- |
20000 |
|
- |
| 4.7.4.2(Steady state output voltage at nominal DC input) |
- |
20000 |
|
- |
| 4.7.4.3(Steady state output voltage across the DC input range) |
- |
20000 |
|
- |
| 4.7.4.4(Load step response of the output voltage at nominal DC input) |
- |
20000 |
|
- |
| 4.7.4.5(Steady state output frequency) |
- |
20000 |
|
- |
| 4.7.5.2(Sinusoidal output voltage waveform requirements) |
- |
20000 |
|
- |
| 4.7.5.3(Non-sinusoidal output waveform requirements) |
- |
20000 |
|
- |
| 4.7.5.5(Output voltage waveform requirements for inverters for dedicated loads) |
- |
20000 |
|
- |
| 4.8.2.1(Array insulation resistance detection for inverters for ungrounded arrays) |
- |
25000 |
|
- |
| 4.8.2.2(Array insulation resistance detection for inverters for functionally grounded arrays) |
- |
25000 |
|
- |
| 4.8.3.2(30 mA touch current type test for isolated inverters) |
- |
25000 |
|
- |
| 4,8.3.3(Fire hazard residual current type test for isolated inverters) |
- |
25000 |
|
- |
| 4.8.3.5(Protection by residual current monitoring) |
- |
20000 |
|
- |
| 7.3.10(Additional requirements for stand-alone inverters) |
- |
20000 |
|
- |
| 9.3.4(Inverter backfeed current onto the array) |
- |
20000 |
|
- |
| 13.9(Fault indication) |
- |
20000 |
|
- |
| 14(Components) |
- |
5000 |
|
- |
|
- |
-
- |
| 6032 |
URS PRODUCTS AND TESTING PVT. LTD. (A29), NOIDA
| 8168906
| IS/IEC 61730 : PART 1 (2004) |
Photovoltaic (PV) Module Safety Qualification Part 1 Requirements for Construction |
- |
200000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 3(Application classes) |
- |
20000 |
|
- |
| 4(Construction requirements) |
- |
20000 |
|
- |
| 5(Polymeric materials) |
- |
20000 |
|
- |
| 6(Internal wiring and current-carrying parts) |
- |
20000 |
|
- |
| 7(Connections) |
- |
30000 |
|
- |
| 8(Bonding and grounding) |
- |
30000 |
|
- |
| 9(Creepage and clearance distances) |
- |
20000 |
|
- |
| 10(Field wiring compartments with covers) |
- |
20000 |
|
- |
| 11(Marking) |
- |
10000 |
|
- |
| 12() |
- |
10000 |
|
- |
|
- |
-
- |
| 6033 |
URS PRODUCTS AND TESTING PVT. LTD. (A29), NOIDA
| 8168906
| IS 14286 : Part 1 (2019) |
Terrestrial photovoltaic (PV) modules - Design qualification and type approval: Part 1 test requirements (Second Revision) |
- |
950000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 5(Marking and documentation) |
- |
150000 |
|
- |
| 6(Testing) |
- |
150000 |
|
- |
| 8(Major visual defects) |
- |
150000 |
|
- |
| 9(Report) |
- |
150000 |
|
- |
| 10(Modifications) |
- |
150000 |
|
- |
| 11(Test flow and procedures) |
- |
200000 |
|
- |
|
- |
-
- |
| 6034 |
URS PRODUCTS AND TESTING PVT. LTD. (A29), NOIDA
| 8168906
| IS 14286 : Part 1 : Sec 4 (2019) |
Terrestrial photovoltaic (PV) modules - Design qualification and type approval: Part 1 test requirements: Sec 4 special requirements for testing of thin - Film Cu(In,ga)(S,se)2 based photovoltaic (Pv) modules (Second Revision) |
- |
1000000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 11.1(Visual inspection (MQT 01)) |
- |
3000 |
|
- |
| 11.2(Maximum power determination (MQT 02)) |
- |
25000 |
|
- |
| 11.3(Insulation test (MQT 03)) |
- |
20000 |
|
- |
| 11.4(Measurement of temperature coefficients (MQT 04)) |
- |
25000 |
|
- |
| 11.5(Measurement of nominal module operating temperature (NMOT)
(MQT 05)) |
- |
25000 |
|
- |
| 11.6(Performance at STC and NMOT
(MQT 06)) |
- |
70000 |
|
- |
| 11.7(Performance at low irradiance
(MQT 07)) |
- |
25000 |
|
- |
| 11.8(Outdoor exposure test (MQT 08)) |
- |
25000 |
|
- |
| 11.9(Hot-spot endurance test (MQT 09)) |
- |
125000 |
|
- |
| 11.1(UV preconditioning test
(MQT 10)) |
- |
70000 |
|
- |
| 11.11(Thermal cycling test (MQT 11)) |
- |
175000 |
|
- |
| 11.12(Humidity-freeze test (MQT 12)) |
- |
70000 |
|
- |
| 11.13(Damp heat test (MQT 13)) |
- |
150000 |
|
- |
| 11.14(Robustness of terminations
(MQT 14)) |
- |
25000 |
|
- |
| 11.15(Wet leakage current test (MQT 15)) |
- |
25000 |
|
- |
| 11.16(Static mechanical load test
(MQT 16)) |
- |
95000 |
|
- |
| 11.17(Hail test (MQT 17)) |
- |
25000 |
|
- |
| 11.18(Bypass diode thermal test (MQT 18)) |
- |
20000 |
|
- |
| 11.19(Stabilization (MQT 19)) |
- |
2000 |
|
- |
|
- |
-
- |
| 6035 |
URS PRODUCTS AND TESTING PVT. LTD. (A29), NOIDA
| 8168906
| IS 14286 : Part 1 : Sec 3 (2019) |
Terrestrial photovoltaic (PV) modules - Design qualification and type approval: Part 1 test requirements: Sec 3 special requirements for testing of thin - Film amorphous silicon based photovoltaic (Pv) modules (Second Revision) |
- |
1122000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 5
IS 14286( Marking and Documentation) |
- |
2000 |
|
- |
| 11.1
IS 14286( Visual inspection) |
- |
3000 |
|
- |
| 11.2
IS 14286( Maximum power determination) |
- |
25000 |
|
- |
| 11.3
IS 14286( Insulation Test) |
- |
20000 |
|
- |
| 11.4
IS 14286( Measurement of temperature coefficients) |
- |
25000 |
|
- |
| 11.5
IS 14286( Measurement of nominal module operating temperature (NMOT)) |
- |
25000 |
|
- |
| 11.6
IS 14286( Performance at STC and NMOT) |
- |
25000 |
|
- |
| 11.7
IS 14286( Performance at low irradiance) |
- |
25000 |
|
- |
| 11.8
IS 14286( Outdoor exposure Test) |
- |
25000 |
|
- |
| 11.9
IS 14286( Hot-spot endurance test) |
- |
25000 |
|
- |
| 11.10
IS 14286( UV Preconditioning test ) |
- |
70000 |
|
- |
| 11.11
IS 14286( Thermal cycling test) |
- |
175000 |
|
- |
| 11.12
IS 14286( Humidity-freeze test) |
- |
70000 |
|
- |
| 11.13
IS 14286(Damp heat test) |
- |
150000 |
|
- |
| 11.14, Table 1
IS 14286( Robutness of terminations test - Retention of Junction Box on Mounting Surface - Test of Cord Anchorage) |
- |
25000 |
|
- |
| 11.15
IS 14286( Wet leakage current test) |
- |
25000 |
|
- |
| 11.16
IS 14286( Static Mechanical load test) |
- |
95000 |
|
- |
| 11.17, Table 3 & 4,
IS 14286( Hail test) |
- |
25000 |
|
- |
| 11.18
IS 14286( Bypass diode testing) |
- |
20000 |
|
- |
| 11.19
IS 14286( Stabilization ) |
- |
2000 |
|
- |
| 11.15(Wet leakage current test (MQT 15)) |
- |
25000 |
|
- |
| 11.16(Static mechanical load test
(MQT 16)) |
- |
50000 |
|
- |
| 11.17(Hail test (MQT 17)) |
- |
25000 |
|
- |
| 11.18(Bypass diode thermal test (MQT 18)) |
- |
20000 |
|
- |
| 11.19(Stabilization (MQT 19)) |
- |
2000 |
|
- |
|
- |
-
- |
| 6036 |
URS PRODUCTS AND TESTING PVT. LTD. (A29), NOIDA
| 8168906
| IS 14286 : Part 1 : Sec 2 (2019) |
Terrestrial photovoltaic (PV) modules - Design qualification and type approval: Part 1 test requirements: Sec 2 special requirements for testing of thin - Film cadmium telluride (CdTe) based photovoltaic (Pv) modules (Second Revision) |
- |
810000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 5
IS 14286( Marking and Documentation) |
- |
2000 |
|
- |
| 11.1
IS 14286( Visual inspection) |
- |
3000 |
|
- |
| 11.2
IS 14286( Maximum power determination) |
- |
25000 |
|
- |
| 11.3
IS 14286( Insulation Test) |
- |
20000 |
|
- |
| 11.4
IS 14286( Measurement of temperature coefficients) |
- |
25000 |
|
- |
| 11.5
IS 14286( Measurement of nominal module operating temperature (NMOT)) |
- |
25000 |
|
- |
| 11.6
IS 14286( Performance at STC and NMOT) |
- |
25000 |
|
- |
| 11.7
IS 14286( Performance at low irradiance) |
- |
25000 |
|
- |
| 11.8
IS 14286( Outdoor exposure Test) |
- |
25000 |
|
- |
| 11.9
IS 14286( Hot-spot endurance test) |
- |
25000 |
|
- |
| 11.10
IS 14286( UV Preconditioning test ) |
- |
70000 |
|
- |
| 11.11
IS 14286( Thermal cycling test) |
- |
175000 |
|
- |
| 11.13
IS 14286(Damp heat test) |
- |
150000 |
|
- |
| 11.14, Table 1
IS 14286( Robutness of terminations test - Retention of Junction Box on Mounting Surface - Test of Cord Anchorage) |
- |
25000 |
|
- |
| 11.15
IS 14286( Wet leakage current test) |
- |
25000 |
|
- |
| 11.16
IS 14286( Static Mechanical load test) |
- |
95000 |
|
- |
| 11.17, Table 3 & 4,
IS 14286( Hail test) |
- |
25000 |
|
- |
| 11.18
IS 14286( Bypass diode testing) |
- |
20000 |
|
- |
| 11.19
IS 14286( Stabilization ) |
- |
2000 |
|
- |
| 11.18(Bypass diode thermal test (MQT 18)) |
- |
20000 |
|
- |
| 11.19(Stabilization (MQT 19)) |
- |
3000 |
|
- |
|
- |
-
- |
| 6037 |
URS PRODUCTS AND TESTING PVT. LTD. (A29), NOIDA
| 8168906
| IS 14286 : Part 1 : Sec 1 (2019) |
Terrestrial photovoltaic (PV) modules - Design qualification and type approval: Part 1 test requirements: Sec 1 special requirements for testing of crystalline silicon photovoltaic (Pv) modules (Second Revision) |
- |
810000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 11.1(Visual inspection (MQT 01)) |
- |
3000 |
|
- |
| 11.2(Maximum power determination (MQT 02)) |
- |
25000 |
|
- |
| 11.3(Insulation test (MQT 03)) |
- |
20000 |
|
- |
| 11.4(Measurement of temperature coefficients (MQT 04)) |
- |
25000 |
|
- |
| 11.5(Measurement of nominal module operating temperature (NMOT)
(MQT 05)) |
- |
25000 |
|
- |
| 11.6(Performance at STC and NMOT
(MQT 06)) |
- |
25000 |
|
- |
| 11.7(Performance at low irradiance
(MQT 07)) |
- |
25000 |
|
- |
| 11.8(Outdoor exposure test (MQT 08)) |
- |
25000 |
|
- |
| 11.9(Hot-spot endurance test (MQT 09)) |
- |
25000 |
|
- |
| 11.1(UV preconditioning test
(MQT 10)) |
- |
70000 |
|
- |
| 11.11(Thermal cycling test (MQT 11)) |
- |
175000 |
|
- |
| 11.12(Humidity-freeze test (MQT 12)) |
- |
70000 |
|
- |
| 11.13(Damp heat test (MQT 13)) |
- |
150000 |
|
- |
| 11.14(Robustness of terminations
(MQT 14)) |
- |
25000 |
|
- |
| 11.15(Wet leakage current test (MQT 15)) |
- |
25000 |
|
- |
| 11.16(Static mechanical load test
(MQT 16)) |
- |
50000 |
|
- |
| 11.17(Hail test (MQT 17)) |
- |
25000 |
|
- |
| 11.18(Bypass diode thermal test (MQT 18)) |
- |
20000 |
|
- |
| 11.19(Stabilization (MQT 19)) |
- |
2000 |
|
- |
|
- |
-
- |
| 6038 |
URS PRODUCTS AND TESTING PVT. LTD. (A29), NOIDA
| 8168906
| IS 16169 (2019) |
Utility - Interconnected photovoltaic inverters - Test procedure of islanding prevention measures (First Revision) |
- |
1000000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 7(Documentation) |
- |
50000 |
|
- |
| 6 to 6.2(Test for single or multi-phase inverter to Pass/fail criteria) |
- |
950000 |
|
- |
|
- |
-
- |
| 6039 |
URS PRODUCTS AND TESTING PVT. LTD. (A29), NOIDA
| 8168906
| IS 14286 (2010) |
Crystalline silicon terrestrial photovoltaic (PV) modules - Design qualification and type approval (First Revision) |
- |
810000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4(Marking) |
- |
2000 |
|
- |
| 10.1(Visual inspection) |
- |
3000 |
|
- |
| 10.2(Maximum power determination) |
- |
25000 |
|
- |
| 10.3(Insulation test) |
- |
20000 |
|
- |
| 10.4(Measurement of temperature coefficients) |
- |
25000 |
|
- |
| 10.5(Measurement of NOCT) |
- |
25000 |
|
- |
| 10.6(Performance at STC and NOCT) |
- |
25000 |
|
- |
| 10.7(Performance at low irradiance) |
- |
25000 |
|
- |
| 10.8(Outdoor exposure test) |
- |
25000 |
|
- |
| 10.9(Hot-spot endurance test) |
- |
25000 |
|
- |
| 10.10(UV preconditioning) |
- |
70000 |
|
- |
| 10.11(Thermal cycling test) |
- |
175000 |
|
- |
| 10.12(Humidity freeze test) |
- |
70000 |
|
- |
| 10.13(Damp heat test) |
- |
150000 |
|
- |
| 10.14(Robustness of termination test) |
- |
25000 |
|
- |
| 10.15(Wet leakage current test) |
- |
25000 |
|
- |
| 10.16(Mechanical load test) |
- |
50000 |
|
- |
| 10.17(Hail test) |
- |
25000 |
|
- |
| 10.18(Bypass diode thermal' test) |
- |
20000 |
|
- |
|
- |
-
- |
| 6040 |
URS PRODUCTS AND TESTING PVT. LTD. (A29), NOIDA
| 8168906
| IS 10908 (1991) |
Flexible rubber tubing for liquefied petroleum gas - Specification (First Revision) |
- |
9000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl.4.1 (The tubing made out of this material shall be green in colour ) |
- |
100 |
|
- |
| Cl.4.2(The walls shall be seamless and free from all visible such as lumps, blows-holes,cracks etc and the bore shall be clean and free from loose particles which might be carried forward by the gas) |
- |
100 |
|
- |
| Cl4.3.1(The tubing shall be supplied in 6.4 and 7.0 mm inisde diametre,The tolerance on nominal diamtere shall be as per table 1) |
- |
400 |
|
- |
| Cl4.3.2(it shall comply with the thickness as givien in table 1 when measured according to 4.2.2 of IS 443;1975 The readings shall be taken from different sample sections.) |
- |
400 |
|
- |
| Cl.4.4,(Cl.4.4.1)(when tested in accordance with the method given in AnnexureA. It shall fit over the standard and oversize metal nozzle shown in Fig1,2 and 3) |
- |
800 |
|
- |
| Cl.4.4,(Cl.4.4.2)(it shall remain atatched to both nozzles throught the test period) |
- |
800 |
|
- |
| Cl.4.5(When immersed in water for 5 minutes under an internal air pressure of 0.25 Mpa or 250kPa (2.5 bar), the increase in the outside diametre of the tubing ,Also the same shall not burst when the pressure is increasded to 0.5 Mpa or 500 kpa (5 bar0, The test shall be carried out on a lengtj of 60 cm.) |
- |
800 |
|
- |
| Cl.4.5(When immersed in water for 5 minutes under an internal air pressure of 0.25 Mpa or 250kPa (2.5 bar), the same shall not burst when the pressure is increasded to 0.5 Mpa or 500 kpa (5 bar0, The test shall be carried out on a lengtj of 60 cm.) |
- |
800 |
|
- |
| Cl.4.6(Shore Hardness: the hardnesss on the flatsurface of the cut/slit tubing shall be measured and the same shall be 60 ± 5˚A) |
- |
800 |
|
- |
| Cl.4.7(Accelerated Ageing test, the flexible tubing or suitable portion of the tubing shall be subjected to accelerated ageing at a temperature of 100Deg Cfor 72 hours in accordance with the method prescribed in IS 3400 (Part 4) it shall not show a change of + 10 A of its orignal shore hardness ) |
- |
1500 |
|
- |
| Cl.4.8.1(Flexible test , Annexure B The gas pressure shown on the manometre shall not drop by more than 1 Kpa) |
- |
800 |
|
- |
| Cl4.8.2(The tubing shall be so flexible that it will make contact with a cylinder former of radius 68 mm for at least 110 deg of its circumference when the tubing is placed over the framer and a mass of 1.6 kg is attcahed to each end) |
- |
800 |
|
- |
| Cl.4.9(Crushing test , ) |
- |
1000 |
|
- |
| Cl.4.10(Resistance to lpg ,Annexure c Shall not be more than 15 % of the initial mass of the tubing and the amount of exctractable matter shall not excced 10 percent of the iniital mass of te tubing) |
- |
900 |
|
- |
| Cl.4.11(Resistance to Ozone ,Annexure D Shall not show any breakage on surface or crack or defects) |
- |
2000 |
|
- |
| Cl.4.12(Burning behaviour on exposure to small flame,Annexure E tubing shall not burn to either of the outer marks within the test period of 45 seconds) |
- |
1000 |
|
- |
|
- |
-
- |
| 6041 |
URS PRODUCTS AND TESTING PVT. LTD. (A29), NOIDA
| 8168906
| IS 13395 (2021) |
Performance of Handles and Handle Assemblies Attached to Cookware - Specification ( First Revision ) |
- |
10000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4.1(Construction) |
- |
200 |
|
- |
| 4.2(Materials) |
- |
200 |
|
- |
| 4.3(Selection and Size) |
- |
200 |
|
- |
| 4.4(Position of handle and knob with respect to cookware) |
- |
200 |
|
- |
| 4.5(Attachment to cookware) |
- |
200 |
|
- |
| 4.() |
- |
200 |
|
- |
| 4.() |
- |
200 |
|
- |
| 5.1(General) |
- |
400 |
|
- |
| 5.2(Bending strength) |
- |
800 |
|
- |
| 5.3(Torque strength) |
- |
800 |
|
- |
| 5.4(Impact strength) |
- |
800 |
|
- |
| 5.5(Fatigue resistance) |
- |
3000 |
|
- |
| 5.6(Leakage) |
- |
2000 |
|
- |
| 5.7(Thermal insulation) |
- |
1000 |
|
- |
| 5.8(Heat resistance) |
- |
800 |
|
- |
| 5.9(Washing resistance) |
- |
900 |
|
- |
| 5.10(Burning resistance) |
- |
900 |
|
- |
|
- |
-
- |
| 6042 |
URS PRODUCTS AND TESTING PVT. LTD. (A29), NOIDA
| 8168906
| IS 6911 (2017) |
Stainless steel plate, sheet and strip - Specification (Second Revision) |
- |
8000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 6(Freedom from defects , IS 6911) |
- |
100 |
|
- |
| Cl. 7.1 & 7.2 Table 1(Carbon -IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
300 |
|
- |
| Cl. 7.1 & 7.2 Table 1(Chromium -IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
300 |
|
- |
| Cl. 7.1 & 7.2 Table 1(Copper -IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
300 |
|
- |
| Cl. 7.1 & 7.2 Table 1(Manganese -IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
300 |
|
- |
| Cl. 7.1 & 7.2 Table 1(Molybdenum -IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
300 |
|
- |
| Cl. 7.1 & 7.2 Table 1(Nickel -IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
300 |
|
- |
| Cl. 7.1 & 7.2 Table 1(Nitrogen -IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
300 |
|
- |
| Cl. 7.1 & 7.2 Table 1(Phosphorus -IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
300 |
|
- |
| Cl. 7.1 & 7.2 Table 1(Sulphur -IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
300 |
|
- |
| Cl. 7.1 & 7.2 Table 1(Silicon -IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
300 |
|
- |
| Cl. 7.1 & 7.2 Table 1(Niobium-IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
300 |
|
- |
| Cl. 7.1 & 7.2 Table 1(Titanium-IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
300 |
|
- |
| Cl. 7.1 & 7.2 Table 1(Others-IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
300 |
|
- |
| 10.1 - 4(Tensile Test) |
- |
800 |
|
- |
| 10.1 - 4(Yield strength) |
- |
800 |
|
- |
| 10.1 Amd 2(0.2 Percent Proof Stress) |
- |
1000 |
|
- |
| 10.1 - 4(Elongation % on 50mm) |
- |
700 |
|
- |
| 10.2(Hardness Test) |
- |
800 |
|
- |
| 10.3(Bend Test) |
- |
700 |
|
- |
| 11(Erichsen Cupping Test) |
- |
700 |
|
- |
| 17(Dimension and tolerance) |
- |
300 |
|
- |
| 12(Corrosion resistance) |
- |
500 |
|
- |
|
- |
-
- |
| 6043 |
URS PRODUCTS AND TESTING PVT. LTD. (A29), NOIDA
| 8168906
| IS 6528 (1995) |
Stainless steel wire - Specification (First Revision) |
- |
7000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl 6(Workmanship) |
- |
100 |
|
- |
| Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1)(Titanium) |
- |
300 |
|
- |
| Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1)(Vanadium) |
- |
300 |
|
- |
| Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1)(Boron) |
- |
300 |
|
- |
| Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1)(Aluminium) |
- |
300 |
|
- |
| Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1)(Carbon) |
- |
300 |
|
- |
| Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1)(Chromium) |
- |
300 |
|
- |
| Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1)(Copper) |
- |
300 |
|
- |
| Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1)(Manganese) |
- |
300 |
|
- |
| Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1)(Molybdenum) |
- |
300 |
|
- |
| Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1)(Nickel) |
- |
300 |
|
- |
| Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1)(Nitrogen) |
- |
300 |
|
- |
| Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1)(Phosphorous) |
- |
300 |
|
- |
| Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1)(Silicon) |
- |
300 |
|
- |
| Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1)(Sulphor) |
- |
300 |
|
- |
| Cl 9.1 & Table 3(Diameter & Out Of Round) |
- |
300 |
|
- |
| Cl 10(UTM) |
- |
2000 |
|
- |
| 10.3(Torsion test- IS 1717) |
- |
1000 |
|
- |
| 10.4(Wrapping test-IS 1755) |
- |
1000 |
|
- |
| 15(Corrosion Resistance - IS:10461) |
- |
800 |
|
- |
|
- |
-
- |
| 6044 |
URS PRODUCTS AND TESTING PVT. LTD. (A29), NOIDA
| 8168906
| IS 5522 (2014) |
Stainless steel sheets and strips for utensils - Specification (Third Revision) |
- |
6000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl . 6 .0(Freedom from defect) |
- |
100 |
|
- |
| Cl. 7.1 & 7.2 Table 1(Carbon -IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
200 |
|
- |
| Cl. 7.1 & 7.2 Table 1(Silicon -IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
200 |
|
- |
| Cl. 7.1 & 7.2 Table 1(Manganese -IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
2002 |
|
- |
| Cl. 7.1 & 7.2 Table 1(Nickel -IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
200 |
|
- |
| Cl. 7.1 & 7.2 Table 1(Chromium -IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
200 |
|
- |
| Cl. 7.1 & 7.2 Table 1(Sulphur -IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
200 |
|
- |
| Cl. 7.1 & 7.2 Table 1(Phosphorus -IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
200 |
|
- |
| Cl. 7.1 & 7.2 Table 1(Nitrogen -IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
200 |
|
- |
| 8.2, Table 3(Tensile Test-1608:Part 1) |
- |
2000 |
|
- |
| 8.2, Table 3(Proof Stress, N/mm2) |
- |
1500 |
|
- |
| 8.2, Table 3(Tensile Strength, N/mm2) |
- |
1000 |
|
- |
| 8.2, Table 3(Elongation, %) |
- |
800 |
|
- |
| 8.3(Hardness , max-IS 1500 or IS 1501 (Part 1) or IS 1586) |
- |
800 |
|
- |
| 8.4(Bend Test) |
- |
500 |
|
- |
| 8.5(Erichsen Cupping Test) |
- |
700 |
|
- |
| 10.1(Thickness, mm) |
- |
200 |
|
- |
| 10.2(width, mm) |
- |
200 |
|
- |
| 10.3(Length, mm) |
- |
200 |
|
- |
| 10.4(Flatness,mm) |
- |
200 |
|
- |
| 10.5(Camber, mm) |
- |
200 |
|
- |
| 11(Surface Finish) |
- |
100 |
|
- |
|
- |
-
- |
| 6045 |
URS PRODUCTS AND TESTING PVT. LTD. (A29), NOIDA
| 8168906
| IS 740 (1977) |
Specification for wrought aluminium and aluminium alloy rivet stock for general engineering purposes (Second Revision) |
- |
13000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4.1,
Table 1of IS:740 (Designation 65032)(Aluminium) |
- |
600 |
|
- |
| 4.1,
Table 1of IS:740 (Designation 64430)(Aluminium) |
- |
600 |
|
- |
| 4.1,
Table 1of IS:740 (Designation 55000)(Aluminium) |
- |
600 |
|
- |
| 4.1,
Table 1of IS:740 (Designation 53000)(Aluminium) |
- |
600 |
|
- |
| 4.1,
Table 1of IS:740 (Designation 24345)(Aluminium) |
- |
600 |
|
- |
| 4.1,
Table 1of IS:740 (Designation 19000)(Aluminium) |
- |
600 |
|
- |
| 4.1,
Table 1of IS:740 (Designation 65032)(Either Cr or Mn shall present) |
- |
600 |
|
- |
| 4.1,
Table 1of IS:740 (Designation 65032)(Titanium and or other grain refining elements) |
- |
600 |
|
- |
| 4.1,
Table 1of IS:740 (Designation 64430)(Cr+Mn) |
- |
600 |
|
- |
| 4.1,
Table 1of IS:740 (Designation 64430)(Titanium and or other grain refining elements) |
- |
600 |
|
- |
| 4.1,
Table 1of IS:740 (Designation 55000)(Cr+Mn) |
- |
600 |
|
- |
| 4.1,
Table 1of IS:740 (Designation 55000)(Titanium and or other grain refining elements) |
- |
600 |
|
- |
| 4.1,
Table 1of IS:740 (Designation 53000)(Cr+Mn) |
- |
600 |
|
- |
| 4.1,
Table 1of IS:740 (Designation 53000)(Titanium and or other grain refining elements) |
- |
600 |
|
- |
| 4.1,
Table 1of IS:740 (Designation 24345)(Titanium and or other grain refining elements) |
- |
600 |
|
- |
| 4.1,
Table 1of IS:740 (Designation 19000)(Cu+Mg+Si+Fe+Mn+Zn) |
- |
600 |
|
- |
| 4.1,
Table 1of IS:740 (Designation 65032)(Chromium) |
- |
600 |
|
- |
| 4.1,
Table 1of IS:740 (Designation 65032)(Copper) |
- |
600 |
|
- |
| 4.1,
Table 1of IS:740 (Designation 65032)(Iron) |
- |
600 |
|
- |
| 4.1,
Table 1of IS:740 (Designation 65032)(Magnesium) |
- |
600 |
|
- |
| 4.1,
Table 1of IS:740 (Designation 65032)(Manganese) |
- |
600 |
|
- |
| 4.1,
Table 1of IS:740 (Designation 65032)(Silicon) |
- |
600 |
|
- |
| 4.1,
Table 1of IS:740 (Designation 65032)(Zinc) |
- |
600 |
|
- |
| 4.1,
Table 1of IS:740 (Designation 64430)(Chromium) |
- |
600 |
|
- |
| 4.1,
Table 1of IS:740 (Designation 55000)(Chromium) |
- |
600 |
|
- |
| 4.1,
Table 1of IS:740 (Designation 53000)(Chromium) |
- |
600 |
|
- |
| 4.1,
Table 1of IS:740 (Designation 24345)(Chromium) |
- |
600 |
|
- |
| 4.1,
Table 1of IS:740 (Designation 64430)(Copper) |
- |
600 |
|
- |
| 4.1,
Table 1of IS:740 (Designation 55000)(Copper) |
- |
600 |
|
- |
| 4.1,
Table 1of IS:740 (Designation 53000)(Copper) |
- |
600 |
|
- |
| 4.1,
Table 1of IS:740 (Designation 24345)(Copper) |
- |
600 |
|
- |
| 4.1,
Table 1of IS:740 (Designation 19000)(Copper) |
- |
600 |
|
- |
| 4.1,
Table 1of IS:740 (Designation 64430)(Iron) |
- |
600 |
|
- |
| 4.1,
Table 1of IS:740 (Designation 55000)(Iron) |
- |
600 |
|
- |
| 4.1,
Table 1of IS:740 (Designation 53000)(Iron) |
- |
600 |
|
- |
| 4.1,
Table 1of IS:740 (Designation 24345)(Iron) |
- |
600 |
|
- |
| 4.1,
Table 1of IS:740 (Designation 19000)(Iron) |
- |
600 |
|
- |
| 4.1,
Table 1of IS:740 (Designation 64430)(Magnesium) |
- |
600 |
|
- |
| 4.1,
Table 1of IS:740 (Designation 55000)(Magnesium) |
- |
600 |
|
- |
| 4.1,
Table 1of IS:740 (Designation 53000)(Magnesium) |
- |
600 |
|
- |
| 4.1,
Table 1of IS:740 (Designation 24345)(Magnesium) |
- |
600 |
|
- |
| 4.1,
Table 1of IS:740 (Designation 19000)(Magnesium) |
- |
600 |
|
- |
| 4.1,
Table 1of IS:740 (Designation 64430)(Manganese) |
- |
600 |
|
- |
| 4.1,
Table 1of IS:740 (Designation 55000)(Manganese) |
- |
600 |
|
- |
| 4.1,
Table 1of IS:740 (Designation 53000)(Manganese) |
- |
600 |
|
- |
| 4.1,
Table 1of IS:740 (Designation 24345)(Manganese) |
- |
600 |
|
- |
| 4.1,
Table 1of IS:740 (Designation 19000)(Manganese) |
- |
600 |
|
- |
| 4.1,
Table 1of IS:740 (Designation 64430)(Silicon) |
- |
600 |
|
- |
| 4.1,
Table 1of IS:740 (Designation 55000)(Silicon) |
- |
600 |
|
- |
| 4.1,
Table 1of IS:740 (Designation 53000)(Silicon) |
- |
600 |
|
- |
| 4.1,
Table 1of IS:740 (Designation 24345)(Silicon) |
- |
600 |
|
- |
| 4.1,
Table 1of IS:740 (Designation 19000)(Silicon) |
- |
600 |
|
- |
| 4.1,
Table 1of IS:740 (Designation 64430)(Zinc) |
- |
600 |
|
- |
| 4.1,
Table 1of IS:740 (Designation 55000)(Zinc) |
- |
600 |
|
- |
| 4.1,
Table 1of IS:740 (Designation 53000)(Zinc) |
- |
600 |
|
- |
| 4.1,
Table 1of IS:740 (Designation 24345)(Zinc) |
- |
600 |
|
- |
| 4.1,
Table 1of IS:740 (Designation 19000)(Zinc) |
- |
600 |
|
- |
| 4.1,
Table 1of IS:740 (Designation & Condition 65032, 'W')(Tensile Strength of Size upto and including 25 mm) |
- |
2000 |
|
- |
| 4.1,
Table 1of IS:740 (Designation & Condition 64430, 'W')(Tensile Strength of Size upto and including 25 mm) |
- |
2000 |
|
- |
| 4.1,
Table 1of IS:740 (Designation & Condition 55000, 'OD')(Tensile Strength of Size upto and including 25 mm) |
- |
2000 |
|
- |
| 4.1,
Table 1of IS:740 (Designation & Condition 55000, 'O or M')(Tensile Strength of Size upto and including 25 mm) |
- |
2000 |
|
- |
| 4.1,
Table 1of IS:740 (Designation & Condition 53000, 'OD')(Tensile Strength of Size upto and including 25 mm) |
- |
2000 |
|
- |
| 4.1,
Table 1of IS:740 (Designation & Condition 53000, 'O or M')(Tensile Strength of Size upto and including 25 mm) |
- |
2000 |
|
- |
| 4.1,
Table 1of IS:740 (Designation & Condition 24345, 'W')(Tensile Strength of Size upto and including 12 mm) |
- |
2000 |
|
- |
| 4.1,
Table 1of IS:740 (Designation & Condition 19000, '112')(Tensile Strength of Size upto and including 12 mm) |
- |
2000 |
|
- |
| 6(Freedom From Defects) |
- |
500 |
|
- |
| 7(Dmension And Tolerances) |
- |
500 |
|
- |
| 9.2(Head Forming Test) |
- |
1500 |
|
- |
| 11(Marking) |
- |
200 |
|
- |
|
- |
-
- |
| 6046 |
URS PRODUCTS AND TESTING PVT. LTD. (A29), NOIDA
| 8168906
| IS 739 (1992) |
Wrought aluminium and aluminium alloys - Wire for general engineering purposes - Specification (Third Revision) |
- |
11000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 6.0(Freedom from defects) |
- |
300 |
|
- |
| 7.0(Dimension and Tolerances) |
- |
500 |
|
- |
| 8.1 Table-1(Al) |
- |
800 |
|
- |
| 8.1 Table-1(Cu) |
- |
800 |
|
- |
| 8.1 Table-1(Mg) |
- |
800 |
|
- |
| 8.1 Table-1(Si) |
- |
800 |
|
- |
| 8.1 Table-1(Fe) |
- |
800 |
|
- |
| 8.1 Table-1(Mn) |
- |
800 |
|
- |
| 8.1 Table-1(Zn) |
- |
800 |
|
- |
| 8.1 Table-1(Ti) |
- |
800 |
|
- |
| 8.1 Table-1(Cr) |
- |
800 |
|
- |
| 9.1(Tensile Strength) |
- |
2500 |
|
- |
| 9.3(Wrapping Test) |
- |
1500 |
|
- |
| 10(Selection of Test Samples) |
- |
500 |
|
- |
|
- |
-
- |
| 6047 |
URS PRODUCTS AND TESTING PVT. LTD. (A29), NOIDA
| 8168906
| IS 737 (2008) |
Wrought aluminium and aluminium alloy sheet and strip for general engineering purposes - Specification (Fourth Revision) |
- |
9000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 5.0(Freedom from defects) |
- |
200 |
|
- |
| 6 Table-1(Al) |
- |
500 |
|
- |
| 6 Table-1(Cr) |
- |
500 |
|
- |
| 6 Table-1(Cu) |
- |
500 |
|
- |
| 6 Table-1(Mg) |
- |
500 |
|
- |
| 6 Table-1(Mn) |
- |
500 |
|
- |
| 6 Table-1(Si) |
- |
500 |
|
- |
| 6 Table-1(Fe) |
- |
500 |
|
- |
| 6 Table-1(Zn) |
- |
500 |
|
- |
| 6 Table-1(Ti) |
- |
500 |
|
- |
| 6 Table-1(Cu+Si+Fe) |
- |
500 |
|
- |
| 6 Table-1(Cu+Si+Fe+Mn+Zn) |
- |
500 |
|
- |
| 6 Table-1(Cu+Mg+Si+Fe+Mn+Zn) |
- |
500 |
|
- |
| 6 Table-1(Zr) |
- |
500 |
|
- |
| 6 Table-1(Cr+Mn) |
- |
500 |
|
- |
| 7 Table-2(Tensile Strength) |
- |
1000 |
|
- |
| 7 Table-2(Elongation) |
- |
1000 |
|
- |
| 7 Table-2(0.2 % Proof Stress) |
- |
1300 |
|
- |
| 7 Table-2(Bend Test) |
- |
900 |
|
- |
| 9(Dimension - IS 2676) |
- |
500 |
|
- |
| 12(Marking) |
- |
300 |
|
- |
|
- |
-
- |
| 6048 |
URS PRODUCTS AND TESTING PVT. LTD. (A29), NOIDA
| 8168906
| IS 733 (1983) |
Specification for wrought aluminium and aluminium alloy bars, rods and sections (For General Engineering Purposes) (Third Revision) |
- |
8000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl. 4(Freedom from Defects) |
- |
200 |
|
- |
| Cl. 5.1, Table 2(Tensile Strength- IS 1816) |
- |
1000 |
|
- |
| Cl. 5.1, Table 2(Elongation on 50 mm or 5.65√So Gauge Length) |
- |
1000 |
|
- |
| Cl. 5.1, Table 2(0.2 Percent proof stress- IS 1816) |
- |
1300 |
|
- |
| Cl. 0.4, 5.1, Table 1(Aluminium- IS 504 or by any other suitable instrumental method) |
- |
500 |
|
- |
| Cl. 0.4, 5.1, Table 1(Chromium- IS 504 or by any other suitable instrumental method) |
- |
500 |
|
- |
| Cl. 0.4, 5.1, Table 1(Copper- IS 504 or by any other suitable instrumental method) |
- |
500 |
|
- |
| Cl. 0.4, 5.1, Table 1(Magnesium- IS 504 or by any other suitable instrumental method) |
- |
500 |
|
- |
| Cl. 0.4, 5.1, Table 1(Silicon- IS 504 or by any other suitable instrumental method) |
- |
500 |
|
- |
| Cl. 0.4, 5.1, Table 1(Iron- IS 504 or by any other suitable instrumental method) |
- |
500 |
|
- |
| Cl. 0.4, 5.1, Table 1(Zinc- IS 504 or by any other suitable instrumental method) |
- |
500 |
|
- |
| Cl. 0.4, 5.1, Table 1(Titanium and / or other grain refining elements - IS 504 or by any other suitable instrumental method) |
- |
500 |
|
- |
| Cl. 0.4, 5.1, Table 1(Ti+ V- IS 504 or by any other suitable instrumental method) |
- |
500 |
|
- |
| Cl. 0.4, 5.1, Table 1(Total Impurities- IS 504 or by any other suitable instrumental method) |
- |
500 |
|
- |
| Cl. 0.4, 5.1, Table 1(Cr+ Mn- IS 504 or by any other suitable instrumental method) |
- |
500 |
|
- |
| 7(Dimension - IS 3965) |
- |
400 |
|
- |
| 11(Marking) |
- |
300 |
|
- |
| Cl. 4(Freedom from Defects) |
- |
- |
|
- |
| Cl. 5.1, Table 2(Tensile Strength- IS 1816) |
- |
- |
|
- |
| Cl. 5.1, Table 2(Elongation on 50 mm or 5.65√So Gauge Length) |
- |
- |
|
- |
| Cl. 5.1, Table 2(0.2 Percent proof stress- IS 1816) |
- |
- |
|
- |
| Cl. 0.4, 5.1, Table 1(Aluminium- IS 504 or by any other suitable instrumental method) |
- |
- |
|
- |
| Cl. 0.4, 5.1, Table 1(Chromium- IS 504 or by any other suitable instrumental method) |
- |
- |
|
- |
| Cl. 0.4, 5.1, Table 1(Copper- IS 504 or by any other suitable instrumental method) |
- |
- |
|
- |
| Cl. 0.4, 5.1, Table 1(Magnesium- IS 504 or by any other suitable instrumental method) |
- |
- |
|
- |
| Cl. 0.4, 5.1, Table 1(Silicon- IS 504 or by any other suitable instrumental method) |
- |
- |
|
- |
| Cl. 0.4, 5.1, Table 1(Iron- IS 504 or by any other suitable instrumental method) |
- |
- |
|
- |
| Cl. 0.4, 5.1, Table 1(Zinc- IS 504 or by any other suitable instrumental method) |
- |
- |
|
- |
| Cl. 0.4, 5.1, Table 1(Titanium and / or other grain refining elements - IS 504 or by any other suitable instrumental method) |
- |
- |
|
- |
| Cl. 0.4, 5.1, Table 1(Ti+ V- IS 504 or by any other suitable instrumental method) |
- |
- |
|
- |
| Cl. 0.4, 5.1, Table 1(Total Impurities- IS 504 or by any other suitable instrumental method) |
- |
- |
|
- |
| Cl. 0.4, 5.1, Table 1(Cr+ Mn- IS 504 or by any other suitable instrumental method) |
- |
- |
|
- |
| 7(Dimension - IS 3965) |
- |
- |
|
- |
| 11(Marking) |
- |
- |
|
- |
|
- |
-
- |
| 6049 |
URS PRODUCTS AND TESTING PVT. LTD. (A29), NOIDA
| 8168906
| IS 13983 (1994) |
Stainless Steel Sinks For Domestic Purposes |
- |
7000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4(Type) |
- |
200 |
|
- |
| Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-04-Cr-19-Ni-19 (Numeric Symbol 304)(Carbon Content) |
- |
300 |
|
- |
| Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-04-Cr-19-Ni-19 (Numeric Symbol 304)(Silicon Content) |
- |
300 |
|
- |
| Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-04-Cr-19-Ni-19 (Numeric Symbol 304)(Manganese Content) |
- |
300 |
|
- |
| Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-04-Cr-19-Ni-19 (Numeric Symbol 304)(Nickel Content) |
- |
300 |
|
- |
| Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-04-Cr-19-Ni-19 (Numeric Symbol 304)(Chromium Content) |
- |
300 |
|
- |
| Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-04-Cr-19-Ni-19 (Numeric Symbol 304)(Sulphur Content) |
- |
300 |
|
- |
| Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-04-Cr-19-Ni-19 (Numeric Symbol 304)(Phouphorous Content) |
- |
300 |
|
- |
| Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-04-Cr-19-Ni-19 (Numeric Symbol 304)(Nitrogen Content) |
- |
300 |
|
- |
| Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-07-Cr-18-Ni-9 (Numeric Symbol 302)(Carbon Content) |
- |
300 |
|
- |
| Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-07-Cr-18-Ni-9 (Numeric Symbol 302)(Silicon Content) |
- |
300 |
|
- |
| Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-07-Cr-18-Ni-9 (Numeric Symbol 302)(Manganese Content) |
- |
300 |
|
- |
| Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-07-Cr-18-Ni-9 (Numeric Symbol 302)(Nickel Content) |
- |
300 |
|
- |
| Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-07-Cr-18-Ni-9 (Numeric Symbol 302)(Chromium Content) |
- |
300 |
|
- |
| Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-07-Cr-18-Ni-9 (Numeric Symbol 302)(Sulphur Content) |
- |
300 |
|
- |
| Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-07-Cr-18-Ni-9 (Numeric Symbol 302)(Phouphorous Content) |
- |
300 |
|
- |
| Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-07-Cr-18-Ni-9 (Numeric Symbol 302)(Nitrogen Content) |
- |
300 |
|
- |
| 6(Thickness of sheet/strip) |
- |
400 |
|
- |
| 6(Depth of bowl) |
- |
400 |
|
- |
| 6(Internal dimensions of the bowl) |
- |
400 |
|
- |
| 6.4.1(Bowl Locating Limits) |
- |
400 |
|
- |
| 6(Co-ordinating sizes) |
- |
400 |
|
- |
| 7.1(Consruction and workmanship) |
- |
400 |
|
- |
| 7.1.1(Consruction and workmanship) |
- |
400 |
|
- |
| 7.2(Consruction and workmanship) |
- |
400 |
|
- |
| 7.2.1(Consruction and workmanship) |
- |
400 |
|
- |
| 7.3(CONSTRUCTION AND WORKMANSHIP) |
- |
400 |
|
- |
| 7.4(Waste Outlet) |
- |
400 |
|
- |
| 7.5(Tap holes) |
- |
400 |
|
- |
| 7.6(OVERFLOW) |
- |
400 |
|
- |
| 8(Finish) |
- |
400 |
|
- |
|
- |
-
- |
| 6050 |
URS PRODUCTS AND TESTING PVT. LTD. (A29), NOIDA
| 8168906
| IS 7231 (2021) |
Plastic flushing cisterns for water closets and urinals - Specification (third revision) |
- |
15000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 5.1.1(Construction of Exposed Cistern) |
- |
200 |
|
5% discount for BIS |
| 5.1.1(Construction of Exposed Cistern) |
- |
200 |
|
5% discount for BIS |
| 5.1.1(Construction of Exposed Cistern) |
- |
200 |
|
5% discount for BIS |
| 5.1.2(Construction of Cover) |
- |
200 |
|
5% discount for BIS |
| 5.1.3(Construction of Flush Pipe) |
- |
200 |
|
5% discount for BIS |
| 5.1.3.1(Flush pipe connection to cistern) |
- |
200 |
|
5% discount for BIS |
| 5.1.3.1(Flush pipe connection to cistern) |
- |
200 |
|
5% discount for BIS |
| 5.1.3.1(Flush pipe connection to cistern) |
- |
200 |
|
5% discount for BIS |
| 5.1.3.1(Flush pipe connection to cistern) |
- |
200 |
|
5% discount for BIS |
| 5.1.4(Inlet and Overflow Holes) |
- |
200 |
|
5% discount for BIS |
| 5.1.5(Float Valve) |
- |
200 |
|
5% discount for BIS |
| 5.1.6(Operating Mechanism (Push-Knob)) |
- |
200 |
|
5% discount for BIS |
| 5.1.6(Operating Mechanism (Push-Knob)) |
- |
200 |
|
5% discount for BIS |
| 5.1.7(Overflow Pipe) |
- |
200 |
|
5% discount for BIS |
| 5.1.7.2(Overflow Pipe) |
- |
200 |
|
5% discount for BIS |
| 5.1.7.3(Overflow Pipe) |
- |
200 |
|
5% discount for BIS |
| 5.2.1(Concealed Cistern) |
- |
200 |
|
5% discount for BIS |
| 5.2.1(Concealed Cistern- Construction) |
- |
200 |
|
5% discount for BIS |
| 5.2.2(Flush Pipe) |
- |
200 |
|
5% discount for BIS |
| 5.2.3(Operating Mechanism) |
- |
200 |
|
5% discount for BIS |
| 5.2.3(Operating Mechanism) |
- |
200 |
|
5% discount for BIS |
| 6, 6.1(Finish) |
- |
200 |
|
5% discount for BIS |
| 6.1(Finish) |
- |
200 |
|
5% discount for BIS |
| 6.1(Finish) |
- |
800 |
|
5% discount for BIS |
| 6.2(Finish) |
- |
800 |
|
5% discount for BIS |
| 7.1(Operational and Performance Requirement- Flushing Arrangement) |
- |
300 |
|
5% discount for BIS |
| 7.2(Working Water Level) |
- |
300 |
|
5% discount for BIS |
| 7.3(Freedom from Leakage) |
- |
300 |
|
5% discount for BIS |
| 7.4(Reduced Water Level) |
- |
300 |
|
5% discount for BIS |
| 7.5 (a)(Cistern Discharge Capacity 6/3 Litres) |
- |
600 |
|
5% discount for BIS |
| 7.5 (a)(Cistern Discharge Capacity 6/3 Litres) |
- |
600 |
|
5% discount for BIS |
| 7.5 (b)(Cistern Discharge Capacity 4.8/2.8 litres) |
- |
600 |
|
5% discount for BIS |
| 7.5 (b)(Cistern Discharge Capacity 4.8/2.8 litres) |
- |
600 |
|
5% discount for BIS |
| 7.5 (c)(Cistern Discharge Capacity 4/2 litres) |
- |
600 |
|
5% discount for BIS |
| 7.5 (c)(Cistern Discharge Capacity 4/2 litres) |
- |
600 |
|
5% discount for BIS |
| 7.6 (a)(Discharge Rate) |
- |
900 |
|
5% discount for BIS |
| 7.6 (b)(Discharge Rate) |
- |
900 |
|
5% discount for BIS |
| 7.6 (c)(Discharge Rate) |
- |
900 |
|
5% discount for BIS |
| 7.6(Discharge Rate) |
- |
900 |
|
5% discount for BIS |
| 8.1(Distortion Resistance Test) |
- |
500 |
|
5% discount for BIS |
| 8.2(Dead Load Test) |
- |
800 |
|
5% discount for BIS |
| 8.3(Front Thrust Test) |
- |
800 |
|
5% discount for BIS |
| 8.4(Impact Test) |
- |
900 |
|
5% discount for BIS |
| 8.4.1(Impact Test) |
- |
900 |
|
5% discount for BIS |
| 9.3(Endurance Test) |
- |
3000 |
|
5% discount for BIS |
|
- |
-
- |
| 6051 |
Ace Test Labs & Metrology Pvt. Ltd., Sonipat
| 9162826
| IS 14203 (2023) |
FIRE RESISTING RECORD PROTECTION CABINETS SPECIFICATION Second Revision of IS 14203 |
- |
198000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 3 and 6 (Table 1)(Nominal Sizes - Height) |
- |
20000 |
|
- |
| 3 and 6 (Table 1)(Nominal Sizes - Width) |
- |
20000 |
|
- |
| 3 and 6 (Table 1)(Nominal Sizes - Depth) |
- |
20000 |
|
- |
| 3 and 6 (Table 1)(Height of Pedestal) |
- |
20000 |
|
- |
| 7(Designation) |
- |
20000 |
|
- |
| 8.1(Cabinet Construction) |
- |
20000 |
|
- |
| 8.2(Locking Mechanism) |
- |
100000 |
|
- |
| 8.3(Locks) |
- |
20000 |
|
- |
| 8.4(Handles) |
- |
20000 |
|
- |
| 9(Internal Fixtures) |
- |
20000 |
|
- |
| 10.1(Minimum overall thinckness of coating) |
- |
20000 |
|
- |
| 10.2(Cross Hatch Test) |
- |
20000 |
|
- |
| 11, Annex-B, 3.1(Fire Endurance Test) |
- |
120000 |
|
- |
| 11, Annex-B, 3.2(Fire and Impact test) |
- |
100000 |
|
- |
| 3 and 6 (Table 1)(Nominal Sizes - Height) |
- |
20000 |
|
- |
| 3 and 6 (Table 1)(Nominal Sizes - Width) |
- |
20000 |
|
- |
| 3 and 6 (Table 1)(Nominal Sizes - Depth) |
- |
20000 |
|
- |
| 3 and 6 (Table 1)(Height of Pedestal) |
- |
20000 |
|
- |
| 7(Designation) |
- |
20000 |
|
- |
| 8.1(Cabinet Construction) |
- |
20000 |
|
- |
| 8.2(Locking Mechanism) |
- |
20000 |
|
- |
| 8.3(Locks) |
- |
20000 |
|
- |
| 8.4(Handles) |
- |
20000 |
|
- |
| 9(Internal Fixtures) |
- |
20000 |
|
- |
| 10.1(Minimum overall thinckness of coating) |
- |
20000 |
|
- |
| 10.2(Cross Hatch Test) |
- |
20000 |
|
- |
| 11, Annex-B, 3.1(Fire Endurance Test) |
- |
120000 |
|
- |
| 11, Annex-B, 3.2(Fire and Impact test) |
- |
100000 |
|
- |
|
14 Nov, 2027 |
-
- |
| 6052 |
Atmy Analytical Labs Private Limited (Unit-2), Greater Noida
| 8176106
| IS 14203 (2023) |
FIRE RESISTING RECORD PROTECTION CABINETS SPECIFICATION Second Revision of IS 14203 |
- |
339000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 3 and 6 (Table 1)(Nominal Sizes - Height) |
- |
0 |
|
- |
| 3 and 6 (Table 1)(Nominal Sizes - Width) |
- |
0 |
|
- |
| 3 and 6 (Table 1)(Nominal Sizes - Depth) |
- |
0 |
|
- |
| 3 and 6 (Table 1)(Height of Pedestal) |
- |
0 |
|
- |
| 7(Designation) |
- |
0 |
|
- |
| 8.1(Cabinet Construction) |
- |
0 |
|
- |
| 8.2(Locking Mechanism) |
- |
0 |
|
- |
| 8.3(Locks) |
- |
0 |
|
- |
| 8.4(Handles) |
- |
0 |
|
- |
| 9(Internal Fixtures) |
- |
0 |
|
- |
| 10.1(Minimum overall thinckness of coating) |
- |
0 |
|
- |
| 10.2(Cross Hatch Test) |
- |
0 |
|
- |
| 11, Annex-B, 3.1(Fire Endurance Test) |
- |
0 |
|
- |
| 11, Annex-B, 3.2(Fire and Impact test) |
- |
0 |
|
- |
|
08 Feb, 2027 |
-
Included w.e.f. 01.04.2025 |
| 6053 |
Atmy Analytical Labs Private Limited (Unit-2), Greater Noida
| 8176106
| IS 14561 (2014) |
Fire resisting (Insulating) filing cabinets - Specification (Second Revision) |
ALL |
330000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 3(Types & Rating) |
- |
0 |
|
- |
| 3.1(i) The fire resisting filing cabinets shall be of two types:
a) Vertical fire resisting filing cabinet, and
b) Lateral fire resisting filing cabinet.) |
- |
0 |
|
- |
| 3.2(ii) The standard and lateral fire resisting filing
cabinets shall have one-drawer or two-drawers or three drawers or four-drawers. A typical drawing of the fire resisting filing cabinet is given in Fig. 1.) |
- |
0 |
|
- |
| 3.3(iii) The fire resisting filing cabinets shall have fire
resisting ratings of 60 min or 120 min or 180 min or
240 min) |
- |
0 |
|
- |
| 4(Dimensions and Tolerances, mm) |
- |
0 |
|
- |
| 4.1(Overall Dimensions of Fire Resisting Filing
Cabinets: The internal usable space of the drawers of fire resisting (insulating) filing cabinets shall be as specified in Table 1 or any other size which is mutually agreed to between the purchaser and the supplier.) |
- |
0 |
|
- |
| 4.1(Internal usuable space of drawer, mm:) |
- |
0 |
|
- |
| 4.1(i) Height) |
- |
0 |
|
- |
| 4.1(ii) Width) |
- |
0 |
|
- |
| 4.1(iii) Depth) |
- |
0 |
|
- |
| 4.1(iv) Height of the bottom drawer above floor level) |
- |
0 |
|
- |
| 5(Materials) |
- |
0 |
|
- |
| 6(Designations: The filing cabinet shall be designated by the commonly used name, type, the fire rating and the number of this Indian Standard.) |
- |
0 |
|
- |
| 7(Constructions) |
- |
0 |
|
- |
| 7.1(Outer body and Inner Box: Outer body and inner box shall be fabricated from mild steel or galvanized steel sheets of not less than 0.8 mm and not more than 1.2 mm nominal thickness. The steel shall not have any burrs or dents. If required the outer
body shall be suitably stiffened to avoid bulging) |
- |
0 |
|
- |
| 7.2(Cabinets Sub-Assembly: The external body and drawer fronts of the fire resisting (insulating) filing cabinet shall be of double wall type with homogeneous insulating material filled in
between. Further the construction of the cabinet shall be such that each drawer slides in an individual inner box. The inner boxes shall have a insulating layer between each other to prevent fire spreading from one drawer to another. The joining of inner box, intermediate piece and outer body shall be such that, it forms a cavity to receive drawer front ) |
- |
0 |
|
- |
| 7.3(Filing Drawer: The drawer shall be made from mild steel or galvanized steel sheet of not less than 0.6 mm and not more than 1.0 mm nominal thickness and shall have an arrangement on the sides suitable for the drawer suspension system and an arrangement to stop it when fully pushed in.) |
- |
0 |
|
- |
| 7.3.1(Drawer Front: The drawer front shall be made from mild steel or galvanized steel sheet of not less than 0.6 mm and not more than 1.0 mm nominal thickness and shall be firmly secured to the drawer body by welding, screwing or riveting or any combination of these processes. The construction of drawer front shall be such that it snugly fits in the cavity provided for the same ) |
- |
0 |
|
- |
| 7.4.1(Latch: Each drawer of the cabinet shall be removable but shall be fitted with a latch/positive stop to prevent inadvertent withdrawal and rebound. Such latch shall be lifted/unlocked by the pull of the handle or any other mechanism.) |
- |
0 |
|
- |
| 7.4.2(The locking mechanism shall be designed in such
a manner so that there is minimum passage for direct
conduction of heat from outside to inside) |
- |
0 |
|
- |
| 7.5(Drawer Suspension The drawer suspension shall be either of the following types to ensure withdrawal of the full depth of the drawer:
a) Ball bearing / Roller bearing suspension
(Movement),
b) Solid roller suspension, and
c) Telescopic slide suspension (Extension) |
- |
0 |
|
- |
| 7.6(Handles: Each drawer shall be provided either with a handle made from ferrous/non-ferrous material suitably coated for corrosion resistance, or any polymer and fixed to the front of the drawer or with a built in pulling mechanism) |
- |
0 |
|
- |
| 7.6.1(The drawer handle shall be strong enough to take
a minimum pull of 50 N for 2 min. There shall be no
sharp corners or edges to avoid injury and damage to clothing) |
- |
0 |
|
- |
| 7.7.1(Locks: Top drawer shall be provided with single or dual control key lock having not less than 6 levers or pin cylinder lock having not less than 6 pins, with duplicate keys of stainless steel/nonferrous alloy. Alternatively if required by the purchaser a 3 wheel combination lock or electronic combination lock may be provided either in place of key lock or in addition to key lock) |
- |
0 |
|
- |
| 7.7.2(Each drawer may also be provided with
individual key lock or pin cylinder lock or combination lock subject to agreement between the purchaser and the supplier.) |
- |
0 |
|
- |
| 7.8(Locking Mechanism ) |
- |
0 |
|
- |
| 7.8.1(The locking mechanism shall be such that when
the top drawer is pushed-in fully, it actuates locking
mechanism to lock all other drawers imultaneously,
when they are in pushed-in position) |
- |
0 |
|
- |
| 7.8.1.1(At the time of locking the cabinet, if one of the
drawers is not fully pushed-in, that drawer shall remain unlocked and can be used. As soon as that drawer is pushed-in fully, it shall get locked automatically without further operation of key by the user.) |
- |
0 |
|
- |
| 7.8.1.2(In addition to the above, isolation mechanism
shall also be provided to permit independent locking/ use of other drawers. Such isolation mechanism provided on drawers shall be manually operated) |
- |
0 |
|
- |
| 8(Assemblies) |
- |
0 |
|
- |
| 8.1(The components shall be assembled by bolting,
welding, riveting or by any combination of these
processes) |
- |
0 |
|
- |
| 8.2(All joints between outer body and inner boxes,
the drawer front and the outer body shall be such that, there is minimum direct conduction of heat from outer body to inner body) |
- |
0 |
|
- |
| 9.1(Drawer Suspension Test and Latch Test: The drawer loaded with evenly distributed load of 30 kg
(excluding the weight of drawer) in any drawer shall be operated for 5 000 cycles at a rate of 300 cycles/h ±10 percent. One opening and one closing shall constitute one cycle. The test shall be carried out with maximum two breaks by using electrically or mechanically operated test equipment with a counter fitted on it. After 5 000 cycles the suspension slide and latch mechanism shall not show any apparent distortion, cracks, or failures to operate in a normal smooth manner) |
- |
0 |
|
- |
| 10.1(Finish: All dents, burrs and sharp edges shall be removed from the various components and they shall be thoroughly degreased and cleaned of rust and scale) |
- |
0 |
|
- |
| 10.2(The inside and outside surfaces of the fire resisting
(Insulating) filing cabinet shall be painted or powder coated. In case of paint, an appropriate primer and undercoating shall be used in accordance to industry practices. The minimum overall thickness of the coatings shall be 50 μ for powder coating and 70 μ for liquid paint. Cross hatch test shall be conducted to confirm the adhesion of coating in accordance with 10.2.1) |
- |
0 |
|
- |
| 10.2.1(Cross Hatch Test) |
- |
0 |
|
- |
| 10.2.1(a) Make 6 parallel cut marks using sharp metal
pointer and straight edge, through the painted/
coated surface, so as to make the base surface
visible through cut marks) |
- |
0 |
|
- |
| 10.2.1(b) Cut marks shall be minimum 20 mm long and
at 2 mm distance from each other) |
- |
0 |
|
- |
| 10.2.1(c) Make 6 similar cut marks in the direction
perpendicular to first set of cut marks, with
same length and spacing) |
- |
0 |
|
- |
| 10.2.1(d) These 12 cut marks together shall make a
pattern of 25 squares of 2 mm × 2mm size,
totally separated from each other) |
- |
0 |
|
- |
| 10.2.1(f) To ensure continuous contact with paint/coat
film, rub the tape firmly and remove air
bubbles under the tape, if any) |
- |
0 |
|
- |
| 10.2.1(g)Within 60 to 120 s after sticking the tape,
remove it by seizing free end of the tape and
rapidly pulling it off at an angle close to 180°.) |
- |
0 |
|
- |
| 10.2.1(h) Painting/Coating quality is considered as
acceptable, if no part of any 2 mm × 2 mm
square of paint/coat comes off the surface due
to pulling the tape) |
- |
0 |
|
- |
| 11.1(Fire endurance test) |
- |
0 |
|
- |
| 11.2(Fire and impact test) |
- |
0 |
|
- |
| 12.1(Marking of Cabinets:A metal plate showing classification of cabinet together with the manufacturer’s name, serial number and the
year of manufacture shall be fixed inside surface of
the top drawer of the cabinet in such a way that it is
visible when it is opened.) |
- |
0 |
|
- |
| 12.2(Marking on Keys: The keys shall bear an identification number which shall not be the same as the serial number of the cabinet) |
- |
0 |
|
- |
| 3(Types & Rating) |
- |
0 |
|
- |
| 3.1(i) The fire resisting filing cabinets shall be of two types:
a) Vertical fire resisting filing cabinet, and
b) Lateral fire resisting filing cabinet.) |
- |
0 |
|
- |
| 3.2(ii) The standard and lateral fire resisting filing
cabinets shall have one-drawer or two-drawers or three drawers or four-drawers. A typical drawing of the fire resisting filing cabinet is given in Fig. 1.) |
- |
0 |
|
- |
| 3.3(iii) The fire resisting filing cabinets shall have fire
resisting ratings of 60 min or 120 min or 180 min or
240 min) |
- |
0 |
|
- |
| 4(Dimensions and Tolerances, mm) |
- |
0 |
|
- |
| 4.1(Overall Dimensions of Fire Resisting Filing
Cabinets: The internal usable space of the drawers of fire resisting (insulating) filing cabinets shall be as specified in Table 1 or any other size which is mutually agreed to between the purchaser and the supplier.) |
- |
0 |
|
- |
| 4.1(Internal usuable space of drawer, mm:) |
- |
0 |
|
- |
| 4.1(i) Height) |
- |
0 |
|
- |
| 4.1(ii) Width) |
- |
0 |
|
- |
| 4.1(iii) Depth) |
- |
0 |
|
- |
| 4.1(iv) Height of the bottom drawer above floor level) |
- |
0 |
|
- |
| 5(Materials) |
- |
0 |
|
- |
| 6(Designations: The filing cabinet shall be designated by the commonly used name, type, the fire rating and the number of this Indian Standard.) |
- |
0 |
|
- |
| 7(Constructions) |
- |
0 |
|
- |
| 7.1(Outer body and Inner Box: Outer body and inner box shall be fabricated from mild steel or galvanized steel sheets of not less than 0.8 mm and not more than 1.2 mm nominal thickness. The steel shall not have any burrs or dents. If required the outer
body shall be suitably stiffened to avoid bulging) |
- |
0 |
|
- |
| 7.2(Cabinets Sub-Assembly: The external body and drawer fronts of the fire resisting (insulating) filing cabinet shall be of double wall type with homogeneous insulating material filled in
between. Further the construction of the cabinet shall be such that each drawer slides in an individual inner box. The inner boxes shall have a insulating layer between each other to prevent fire spreading from one drawer to another. The joining of inner box, intermediate piece and outer body shall be such that, it forms a cavity to receive drawer front ) |
- |
0 |
|
- |
| 7.3(Filing Drawer: The drawer shall be made from mild steel or galvanized steel sheet of not less than 0.6 mm and not more than 1.0 mm nominal thickness and shall have an arrangement on the sides suitable for the drawer suspension system and an arrangement to stop it when fully pushed in.) |
- |
0 |
|
- |
| 7.3.1(Drawer Front: The drawer front shall be made from mild steel or galvanized steel sheet of not less than 0.6 mm and not more than 1.0 mm nominal thickness and shall be firmly secured to the drawer body by welding, screwing or riveting or any combination of these processes. The construction of drawer front shall be such that it snugly fits in the cavity provided for the same ) |
- |
0 |
|
- |
| 7.4.1(Latch: Each drawer of the cabinet shall be removable but shall be fitted with a latch/positive stop to prevent inadvertent withdrawal and rebound. Such latch shall be lifted/unlocked by the pull of the handle or any other mechanism.) |
- |
0 |
|
- |
| 7.4.2(The locking mechanism shall be designed in such
a manner so that there is minimum passage for direct
conduction of heat from outside to inside) |
- |
0 |
|
- |
| 7.5(Drawer Suspension The drawer suspension shall be either of the following types to ensure withdrawal of the full depth of the drawer:
a) Ball bearing / Roller bearing suspension
(Movement),
b) Solid roller suspension, and
c) Telescopic slide suspension (Extension) |
- |
0 |
|
- |
| 7.6(Handles: Each drawer shall be provided either with a handle made from ferrous/non-ferrous material suitably coated for corrosion resistance, or any polymer and fixed to the front of the drawer or with a built in pulling mechanism) |
- |
0 |
|
- |
| 7.6.1(The drawer handle shall be strong enough to take
a minimum pull of 50 N for 2 min. There shall be no
sharp corners or edges to avoid injury and damage to clothing) |
- |
0 |
|
- |
| 7.7.1(Locks: Top drawer shall be provided with single or dual control key lock having not less than 6 levers or pin cylinder lock having not less than 6 pins, with duplicate keys of stainless steel/nonferrous alloy. Alternatively if required by the purchaser a 3 wheel combination lock or electronic combination lock may be provided either in place of key lock or in addition to key lock) |
- |
0 |
|
- |
| 7.7.2(Each drawer may also be provided with
individual key lock or pin cylinder lock or combination lock subject to agreement between the purchaser and the supplier.) |
- |
0 |
|
- |
| 7.8(Locking Mechanism ) |
- |
0 |
|
- |
| 7.8.1(The locking mechanism shall be such that when
the top drawer is pushed-in fully, it actuates locking
mechanism to lock all other drawers imultaneously,
when they are in pushed-in position) |
- |
0 |
|
- |
| 7.8.1.1(At the time of locking the cabinet, if one of the
drawers is not fully pushed-in, that drawer shall remain unlocked and can be used. As soon as that drawer is pushed-in fully, it shall get locked automatically without further operation of key by the user.) |
- |
0 |
|
- |
| 7.8.1.2(In addition to the above, isolation mechanism
shall also be provided to permit independent locking/ use of other drawers. Such isolation mechanism provided on drawers shall be manually operated) |
- |
0 |
|
- |
| 8(Assemblies) |
- |
0 |
|
- |
| 8.1(The components shall be assembled by bolting,
welding, riveting or by any combination of these
processes) |
- |
0 |
|
- |
| 8.2(All joints between outer body and inner boxes,
the drawer front and the outer body shall be such that, there is minimum direct conduction of heat from outer body to inner body) |
- |
0 |
|
- |
| 9.1(Drawer Suspension Test and Latch Test: The drawer loaded with evenly distributed load of 30 kg
(excluding the weight of drawer) in any drawer shall be operated for 5 000 cycles at a rate of 300 cycles/h ±10 percent. One opening and one closing shall constitute one cycle. The test shall be carried out with maximum two breaks by using electrically or mechanically operated test equipment with a counter fitted on it. After 5 000 cycles the suspension slide and latch mechanism shall not show any apparent distortion, cracks, or failures to operate in a normal smooth manner) |
- |
0 |
|
- |
| 10.1(Finish: All dents, burrs and sharp edges shall be removed from the various components and they shall be thoroughly degreased and cleaned of rust and scale) |
- |
0 |
|
- |
| 10.2(The inside and outside surfaces of the fire resisting
(Insulating) filing cabinet shall be painted or powder coated. In case of paint, an appropriate primer and undercoating shall be used in accordance to industry practices. The minimum overall thickness of the coatings shall be 50 μ for powder coating and 70 μ for liquid paint. Cross hatch test shall be conducted to confirm the adhesion of coating in accordance with 10.2.1) |
- |
0 |
|
- |
| 10.2.1(Cross Hatch Test) |
- |
0 |
|
- |
| 10.2.1(a) Make 6 parallel cut marks using sharp metal
pointer and straight edge, through the painted/
coated surface, so as to make the base surface
visible through cut marks) |
- |
0 |
|
- |
| 10.2.1(b) Cut marks shall be minimum 20 mm long and
at 2 mm distance from each other) |
- |
0 |
|
- |
| 10.2.1(c) Make 6 similar cut marks in the direction
perpendicular to first set of cut marks, with
same length and spacing) |
- |
0 |
|
- |
| 10.2.1(d) These 12 cut marks together shall make a
pattern of 25 squares of 2 mm × 2mm size,
totally separated from each other) |
- |
0 |
|
- |
| 10.2.1(g)Within 60 to 120 s after sticking the tape,
remove it by seizing free end of the tape and
rapidly pulling it off at an angle close to 180°.) |
- |
0 |
|
- |
| 10.2.1(h) Painting/Coating quality is considered as
acceptable, if no part of any 2 mm × 2 mm
square of paint/coat comes off the surface due
to pulling the tape) |
- |
0 |
|
- |
| 11.1(Fire endurance test) |
- |
0 |
|
- |
| 11.2(Fire and impact test) |
- |
0 |
|
- |
| 12.1(Marking of Cabinets:A metal plate showing classification of cabinet together with the manufacturer’s name, serial number and the
year of manufacture shall be fixed inside surface of
the top drawer of the cabinet in such a way that it is
visible when it is opened.) |
- |
0 |
|
- |
| 12.2(Marking on Keys: The keys shall bear an identification number which shall not be the same as the serial number of the cabinet) |
- |
0 |
|
- |
| 10.2.1(f) To ensure continuous contact with paint/coat
film, rub the tape firmly and remove air
bubbles under the tape, if any) |
- |
0 |
|
- |
|
08 Feb, 2027 |
-
Included w.e.f. 01.04.2025 |
| 6054 |
Ace Test Labs & Metrology Pvt. Ltd., Sonipat
| 9162826
| IS 14561 (2014) |
Fire resisting (Insulating) filing cabinets - Specification (Second Revision) |
- |
258000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 3(Types & Rating) |
- |
5000 |
|
- |
| 3.1(i) The fire resisting filing cabinets shall be of two types:
a) Vertical fire resisting filing cabinet, and
b) Lateral fire resisting filing cabinet.) |
- |
5000 |
|
- |
| 3.2(ii) The standard and lateral fire resisting filing
cabinets shall have one-drawer or two-drawers or three drawers or four-drawers. A typical drawing of the fire resisting filing cabinet is given in Fig. 1.) |
- |
5000 |
|
- |
| 3.3(iii) The fire resisting filing cabinets shall have fire
resisting ratings of 60 min or 120 min or 180 min or
240 min) |
- |
5000 |
|
- |
| 4(Dimensions and Tolerances, mm) |
- |
5000 |
|
- |
| 4.1(Overall Dimensions of Fire Resisting Filing
Cabinets: The internal usable space of the drawers of fire resisting (insulating) filing cabinets shall be as specified in Table 1 or any other size which is mutually agreed to between the purchaser and the supplier.) |
- |
5000 |
|
- |
| 4.1(Internal usuable space of drawer, mm:) |
- |
5000 |
|
- |
| 4.1(i) Height) |
- |
5000 |
|
- |
| 4.1(ii) Width) |
- |
5000 |
|
- |
| 4.1(iii) Depth) |
- |
5000 |
|
- |
| 4.1(iv) Height of the bottom drawer above floor level) |
- |
5000 |
|
- |
| 5(Materials) |
- |
5000 |
|
- |
| 6(Designations: The filing cabinet shall be designated by the commonly used name, type, the fire rating and the number of this Indian Standard.) |
- |
5000 |
|
- |
| 7(Constructions) |
- |
15000 |
|
- |
| 7.1(Outer body and Inner Box: Outer body and inner box shall be fabricated from mild steel or galvanized steel sheets of not less than 0.8 mm and not more than 1.2 mm nominal thickness. The steel shall not have any burrs or dents. If required the outer
body shall be suitably stiffened to avoid bulging) |
- |
5000 |
|
- |
| 7.2(Cabinets Sub-Assembly: The external body and drawer fronts of the fire resisting (insulating) filing cabinet shall be of double wall type with homogeneous insulating material filled in
between. Further the construction of the cabinet shall be such that each drawer slides in an individual inner box. The inner boxes shall have a insulating layer between each other to prevent fire spreading from one drawer to another. The joining of inner box, intermediate piece and outer body shall be such that, it forms a cavity to receive drawer front ) |
- |
5000 |
|
- |
| 7.3(Filing Drawer: The drawer shall be made from mild steel or galvanized steel sheet of not less than 0.6 mm and not more than 1.0 mm nominal thickness and shall have an arrangement on the sides suitable for the drawer suspension system and an arrangement to stop it when fully pushed in.) |
- |
5000 |
|
- |
| 7.3.1(Drawer Front: The drawer front shall be made from mild steel or galvanized steel sheet of not less than 0.6 mm and not more than 1.0 mm nominal thickness and shall be firmly secured to the drawer body by welding, screwing or riveting or any combination of these processes. The construction of drawer front shall be such that it snugly fits in the cavity provided for the same ) |
- |
5000 |
|
- |
| 7.4.1(Latch: Each drawer of the cabinet shall be removable but shall be fitted with a latch/positive stop to prevent inadvertent withdrawal and rebound. Such latch shall be lifted/unlocked by the pull of the handle or any other mechanism.) |
- |
5000 |
|
- |
| 7.4.2(The locking mechanism shall be designed in such
a manner so that there is minimum passage for direct
conduction of heat from outside to inside) |
- |
5000 |
|
- |
| 7.5(Drawer Suspension The drawer suspension shall be either of the following types to ensure withdrawal of the full depth of the drawer:
a) Ball bearing / Roller bearing suspension
(Movement),
b) Solid roller suspension, and
c) Telescopic slide suspension (Extension) |
- |
5000 |
|
- |
| 7.6(Handles: Each drawer shall be provided either with a handle made from ferrous/non-ferrous material suitably coated for corrosion resistance, or any polymer and fixed to the front of the drawer or with a built in pulling mechanism) |
- |
5000 |
|
- |
| 7.6.1(The drawer handle shall be strong enough to take
a minimum pull of 50 N for 2 min. There shall be no
sharp corners or edges to avoid injury and damage to clothing) |
- |
5000 |
|
- |
| 7.7.1(Locks: Top drawer shall be provided with single or dual control key lock having not less than 6 levers or pin cylinder lock having not less than 6 pins, with duplicate keys of stainless steel/nonferrous alloy. Alternatively if required by the purchaser a 3 wheel combination lock or electronic combination lock may be provided either in place of key lock or in addition to key lock) |
- |
5000 |
|
- |
| 7.7.2(Each drawer may also be provided with
individual key lock or pin cylinder lock or combination lock subject to agreement between the purchaser and the supplier.) |
- |
5000 |
|
- |
| 7.8(Locking Mechanism ) |
- |
5000 |
|
- |
| 7.8.1(The locking mechanism shall be such that when
the top drawer is pushed-in fully, it actuates locking
mechanism to lock all other drawers imultaneously,
when they are in pushed-in position) |
- |
5000 |
|
- |
| 7.8.1.1(At the time of locking the cabinet, if one of the
drawers is not fully pushed-in, that drawer shall remain unlocked and can be used. As soon as that drawer is pushed-in fully, it shall get locked automatically without further operation of key by the user.) |
- |
5000 |
|
- |
| 7.8.1.2(In addition to the above, isolation mechanism
shall also be provided to permit independent locking/ use of other drawers. Such isolation mechanism provided on drawers shall be manually operated) |
- |
5000 |
|
- |
| 8(Assemblies) |
- |
5000 |
|
- |
| 8.1(The components shall be assembled by bolting,
welding, riveting or by any combination of these
processes) |
- |
5000 |
|
- |
| 8.2(All joints between outer body and inner boxes,
the drawer front and the outer body shall be such that, there is minimum direct conduction of heat from outer body to inner body) |
- |
5000 |
|
- |
| 9.1(Drawer Suspension Test and Latch Test: The drawer loaded with evenly distributed load of 30 kg
(excluding the weight of drawer) in any drawer shall be operated for 5 000 cycles at a rate of 300 cycles/h ±10 percent. One opening and one closing shall constitute one cycle. The test shall be carried out with maximum two breaks by using electrically or mechanically operated test equipment with a counter fitted on it. After 5 000 cycles the suspension slide and latch mechanism shall not show any apparent distortion, cracks, or failures to operate in a normal smooth manner) |
- |
5000 |
|
- |
| 10.1(Finish: All dents, burrs and sharp edges shall be removed from the various components and they shall be thoroughly degreased and cleaned of rust and scale) |
- |
5000 |
|
- |
| 10.2(The inside and outside surfaces of the fire resisting
(Insulating) filing cabinet shall be painted or powder coated. In case of paint, an appropriate primer and undercoating shall be used in accordance to industry practices. The minimum overall thickness of the coatings shall be 50 μ for powder coating and 70 μ for liquid paint. Cross hatch test shall be conducted to confirm the adhesion of coating in accordance with 10.2.1) |
- |
5000 |
|
- |
| 10.2.1(Cross Hatch Test) |
- |
5000 |
|
- |
| 10.2.1(a) Make 6 parallel cut marks using sharp metal
pointer and straight edge, through the painted/
coated surface, so as to make the base surface
visible through cut marks) |
- |
5000 |
|
- |
| 10.2.1(b) Cut marks shall be minimum 20 mm long and
at 2 mm distance from each other) |
- |
5000 |
|
- |
| 10.2.1(c) Make 6 similar cut marks in the direction
perpendicular to first set of cut marks, with
same length and spacing) |
- |
5000 |
|
- |
| 10.2.1(d) These 12 cut marks together shall make a
pattern of 25 squares of 2 mm × 2mm size,
totally separated from each other) |
- |
5000 |
|
- |
| 10.2.1(f) To ensure continuous contact with paint/coat
film, rub the tape firmly and remove air
bubbles under the tape, if any) |
- |
5000 |
|
- |
| 10.2.1(g)Within 60 to 120 s after sticking the tape,
remove it by seizing free end of the tape and
rapidly pulling it off at an angle close to 180°.) |
- |
5000 |
|
- |
| 10.2.1(h) Painting/Coating quality is considered as
acceptable, if no part of any 2 mm × 2 mm
square of paint/coat comes off the surface due
to pulling the tape) |
- |
5000 |
|
- |
| 11.1(Fire endurance test) |
- |
5000 |
|
- |
| 11.2(Fire and impact test) |
- |
5000 |
|
- |
| 12.1(Marking of Cabinets:A metal plate showing classification of cabinet together with the manufacturer’s name, serial number and the
year of manufacture shall be fixed inside surface of
the top drawer of the cabinet in such a way that it is
visible when it is opened.) |
- |
5000 |
|
- |
| 12.2(Marking on Keys: The keys shall bear an identification number which shall not be the same as the serial number of the cabinet) |
- |
5000 |
|
- |
| 3(Types & Rating) |
- |
5000 |
|
- |
| 3.1(i) The fire resisting filing cabinets shall be of two types:
a) Vertical fire resisting filing cabinet, and
b) Lateral fire resisting filing cabinet.) |
- |
5000 |
|
- |
| 3.2(ii) The standard and lateral fire resisting filing
cabinets shall have one-drawer or two-drawers or three drawers or four-drawers. A typical drawing of the fire resisting filing cabinet is given in Fig. 1.) |
- |
5000 |
|
- |
| 3.3(iii) The fire resisting filing cabinets shall have fire
resisting ratings of 60 min or 120 min or 180 min or
240 min) |
- |
5000 |
|
- |
| 4(Dimensions and Tolerances, mm) |
- |
5000 |
|
- |
| 4.1(Overall Dimensions of Fire Resisting Filing
Cabinets: The internal usable space of the drawers of fire resisting (insulating) filing cabinets shall be as specified in Table 1 or any other size which is mutually agreed to between the purchaser and the supplier.) |
- |
5000 |
|
- |
| 4.1(Internal usuable space of drawer, mm:) |
- |
5000 |
|
- |
| 4.1(i) Height) |
- |
5000 |
|
- |
| 4.1(ii) Width) |
- |
5000 |
|
- |
| 4.1(iii) Depth) |
- |
5000 |
|
- |
| 4.1(iv) Height of the bottom drawer above floor level) |
- |
5000 |
|
- |
| 5(Materials) |
- |
5000 |
|
- |
| 6(Designations: The filing cabinet shall be designated by the commonly used name, type, the fire rating and the number of this Indian Standard.) |
- |
5000 |
|
- |
| 7(Constructions) |
- |
5000 |
|
- |
| 7.1(Outer body and Inner Box: Outer body and inner box shall be fabricated from mild steel or galvanized steel sheets of not less than 0.8 mm and not more than 1.2 mm nominal thickness. The steel shall not have any burrs or dents. If required the outer
body shall be suitably stiffened to avoid bulging) |
- |
5000 |
|
- |
| 7.2(Cabinets Sub-Assembly: The external body and drawer fronts of the fire resisting (insulating) filing cabinet shall be of double wall type with homogeneous insulating material filled in
between. Further the construction of the cabinet shall be such that each drawer slides in an individual inner box. The inner boxes shall have a insulating layer between each other to prevent fire spreading from one drawer to another. The joining of inner box, intermediate piece and outer body shall be such that, it forms a cavity to receive drawer front ) |
- |
5000 |
|
- |
| 7.3(Filing Drawer: The drawer shall be made from mild steel or galvanized steel sheet of not less than 0.6 mm and not more than 1.0 mm nominal thickness and shall have an arrangement on the sides suitable for the drawer suspension system and an arrangement to stop it when fully pushed in.) |
- |
5000 |
|
- |
| 7.3.1(Drawer Front: The drawer front shall be made from mild steel or galvanized steel sheet of not less than 0.6 mm and not more than 1.0 mm nominal thickness and shall be firmly secured to the drawer body by welding, screwing or riveting or any combination of these processes. The construction of drawer front shall be such that it snugly fits in the cavity provided for the same ) |
- |
5000 |
|
- |
| 7.4.1(Latch: Each drawer of the cabinet shall be removable but shall be fitted with a latch/positive stop to prevent inadvertent withdrawal and rebound. Such latch shall be lifted/unlocked by the pull of the handle or any other mechanism.) |
- |
5000 |
|
- |
| 7.4.2(The locking mechanism shall be designed in such
a manner so that there is minimum passage for direct
conduction of heat from outside to inside) |
- |
5000 |
|
- |
| 7.5(Drawer Suspension The drawer suspension shall be either of the following types to ensure withdrawal of the full depth of the drawer:
a) Ball bearing / Roller bearing suspension
(Movement),
b) Solid roller suspension, and
c) Telescopic slide suspension (Extension) |
- |
5000 |
|
- |
| 7.6(Handles: Each drawer shall be provided either with a handle made from ferrous/non-ferrous material suitably coated for corrosion resistance, or any polymer and fixed to the front of the drawer or with a built in pulling mechanism) |
- |
5000 |
|
- |
| 7.6.1(The drawer handle shall be strong enough to take
a minimum pull of 50 N for 2 min. There shall be no
sharp corners or edges to avoid injury and damage to clothing) |
- |
5000 |
|
- |
| 7.7.1(Locks: Top drawer shall be provided with single or dual control key lock having not less than 6 levers or pin cylinder lock having not less than 6 pins, with duplicate keys of stainless steel/nonferrous alloy. Alternatively if required by the purchaser a 3 wheel combination lock or electronic combination lock may be provided either in place of key lock or in addition to key lock) |
- |
5000 |
|
- |
| 7.7.2(Each drawer may also be provided with
individual key lock or pin cylinder lock or combination lock subject to agreement between the purchaser and the supplier.) |
- |
5000 |
|
- |
| 7.8(Locking Mechanism ) |
- |
5000 |
|
- |
| 7.8.1(The locking mechanism shall be such that when
the top drawer is pushed-in fully, it actuates locking
mechanism to lock all other drawers imultaneously,
when they are in pushed-in position) |
- |
5000 |
|
- |
| 7.8.1.1(At the time of locking the cabinet, if one of the
drawers is not fully pushed-in, that drawer shall remain unlocked and can be used. As soon as that drawer is pushed-in fully, it shall get locked automatically without further operation of key by the user.) |
- |
5000 |
|
- |
| 7.8.1.2(In addition to the above, isolation mechanism
shall also be provided to permit independent locking/ use of other drawers. Such isolation mechanism provided on drawers shall be manually operated) |
- |
5000 |
|
- |
| 8(Assemblies) |
- |
5000 |
|
- |
| 8.1(The components shall be assembled by bolting,
welding, riveting or by any combination of these
processes) |
- |
5000 |
|
- |
| 8.2(All joints between outer body and inner boxes,
the drawer front and the outer body shall be such that, there is minimum direct conduction of heat from outer body to inner body) |
- |
5000 |
|
- |
| 9.1(Drawer Suspension Test and Latch Test: The drawer loaded with evenly distributed load of 30 kg
(excluding the weight of drawer) in any drawer shall be operated for 5 000 cycles at a rate of 300 cycles/h ±10 percent. One opening and one closing shall constitute one cycle. The test shall be carried out with maximum two breaks by using electrically or mechanically operated test equipment with a counter fitted on it. After 5 000 cycles the suspension slide and latch mechanism shall not show any apparent distortion, cracks, or failures to operate in a normal smooth manner) |
- |
5000 |
|
- |
| 10.1(Finish: All dents, burrs and sharp edges shall be removed from the various components and they shall be thoroughly degreased and cleaned of rust and scale) |
- |
5000 |
|
- |
| 10.2(The inside and outside surfaces of the fire resisting
(Insulating) filing cabinet shall be painted or powder coated. In case of paint, an appropriate primer and undercoating shall be used in accordance to industry practices. The minimum overall thickness of the coatings shall be 50 μ for powder coating and 70 μ for liquid paint. Cross hatch test shall be conducted to confirm the adhesion of coating in accordance with 10.2.1) |
- |
5000 |
|
- |
| 10.2.1(Cross Hatch Test) |
- |
5000 |
|
- |
| 10.2.1(a) Make 6 parallel cut marks using sharp metal
pointer and straight edge, through the painted/
coated surface, so as to make the base surface
visible through cut marks) |
- |
5000 |
|
- |
| 10.2.1(b) Cut marks shall be minimum 20 mm long and
at 2 mm distance from each other) |
- |
5000 |
|
- |
| 10.2.1(c) Make 6 similar cut marks in the direction
perpendicular to first set of cut marks, with
same length and spacing) |
- |
5000 |
|
- |
| 10.2.1(d) These 12 cut marks together shall make a
pattern of 25 squares of 2 mm × 2mm size,
totally separated from each other) |
- |
5000 |
|
- |
| 10.2.1(f) To ensure continuous contact with paint/coat
film, rub the tape firmly and remove air
bubbles under the tape, if any) |
- |
5000 |
|
- |
| 10.2.1(g)Within 60 to 120 s after sticking the tape,
remove it by seizing free end of the tape and
rapidly pulling it off at an angle close to 180°.) |
- |
5000 |
|
- |
| 10.2.1(h) Painting/Coating quality is considered as
acceptable, if no part of any 2 mm × 2 mm
square of paint/coat comes off the surface due
to pulling the tape) |
- |
5000 |
|
- |
| 11.1(Fire endurance test) |
- |
150000 |
|
- |
| 11.2(Fire and impact test) |
- |
150000 |
|
- |
| 12.1(Marking of Cabinets:A metal plate showing classification of cabinet together with the manufacturer’s name, serial number and the
year of manufacture shall be fixed inside surface of
the top drawer of the cabinet in such a way that it is
visible when it is opened.) |
- |
15000 |
|
- |
| 12.2(Marking on Keys: The keys shall bear an identification number which shall not be the same as the serial number of the cabinet) |
- |
15000 |
|
- |
| 3(Types & Rating) |
- |
15000 |
|
- |
| 3.1(i) The fire resisting filing cabinets shall be of two types:
a) Vertical fire resisting filing cabinet, and
b) Lateral fire resisting filing cabinet.) |
- |
15000 |
|
- |
| 3.2(ii) The standard and lateral fire resisting filing
cabinets shall have one-drawer or two-drawers or three drawers or four-drawers. A typical drawing of the fire resisting filing cabinet is given in Fig. 1.) |
- |
15000 |
|
- |
| 3.3(iii) The fire resisting filing cabinets shall have fire
resisting ratings of 60 min or 120 min or 180 min or
240 min) |
- |
15000 |
|
- |
| 4(Dimensions and Tolerances, mm) |
- |
15000 |
|
- |
| 4.1(Overall Dimensions of Fire Resisting Filing
Cabinets: The internal usable space of the drawers of fire resisting (insulating) filing cabinets shall be as specified in Table 1 or any other size which is mutually agreed to between the purchaser and the supplier.) |
- |
15000 |
|
- |
| 4.1(Internal usuable space of drawer, mm:) |
- |
15000 |
|
- |
| 4.1(i) Height) |
- |
15000 |
|
- |
| 4.1(ii) Width) |
- |
15000 |
|
- |
| 4.1(iii) Depth) |
- |
15000 |
|
- |
| 4.1(iv) Height of the bottom drawer above floor level) |
- |
15000 |
|
- |
| 5(Materials) |
- |
15000 |
|
- |
| 6(Designations: The filing cabinet shall be designated by the commonly used name, type, the fire rating and the number of this Indian Standard.) |
- |
15000 |
|
- |
| 7(Constructions) |
- |
15000 |
|
- |
| 7.1(Outer body and Inner Box: Outer body and inner box shall be fabricated from mild steel or galvanized steel sheets of not less than 0.8 mm and not more than 1.2 mm nominal thickness. The steel shall not have any burrs or dents. If required the outer
body shall be suitably stiffened to avoid bulging) |
- |
15000 |
|
- |
| 7.2(Cabinets Sub-Assembly: The external body and drawer fronts of the fire resisting (insulating) filing cabinet shall be of double wall type with homogeneous insulating material filled in
between. Further the construction of the cabinet shall be such that each drawer slides in an individual inner box. The inner boxes shall have a insulating layer between each other to prevent fire spreading from one drawer to another. The joining of inner box, intermediate piece and outer body shall be such that, it forms a cavity to receive drawer front ) |
- |
15000 |
|
- |
| 7.3(Filing Drawer: The drawer shall be made from mild steel or galvanized steel sheet of not less than 0.6 mm and not more than 1.0 mm nominal thickness and shall have an arrangement on the sides suitable for the drawer suspension system and an arrangement to stop it when fully pushed in.) |
- |
15000 |
|
- |
| 7.3.1(Drawer Front: The drawer front shall be made from mild steel or galvanized steel sheet of not less than 0.6 mm and not more than 1.0 mm nominal thickness and shall be firmly secured to the drawer body by welding, screwing or riveting or any combination of these processes. The construction of drawer front shall be such that it snugly fits in the cavity provided for the same ) |
- |
15000 |
|
- |
| 7.4.1(Latch: Each drawer of the cabinet shall be removable but shall be fitted with a latch/positive stop to prevent inadvertent withdrawal and rebound. Such latch shall be lifted/unlocked by the pull of the handle or any other mechanism.) |
- |
15000 |
|
- |
| 7.4.2(The locking mechanism shall be designed in such
a manner so that there is minimum passage for direct
conduction of heat from outside to inside) |
- |
15000 |
|
- |
| 7.5(Drawer Suspension The drawer suspension shall be either of the following types to ensure withdrawal of the full depth of the drawer:
a) Ball bearing / Roller bearing suspension
(Movement),
b) Solid roller suspension, and
c) Telescopic slide suspension (Extension) |
- |
15000 |
|
- |
| 7.6(Handles: Each drawer shall be provided either with a handle made from ferrous/non-ferrous material suitably coated for corrosion resistance, or any polymer and fixed to the front of the drawer or with a built in pulling mechanism) |
- |
15000 |
|
- |
| 7.6.1(The drawer handle shall be strong enough to take
a minimum pull of 50 N for 2 min. There shall be no
sharp corners or edges to avoid injury and damage to clothing) |
- |
15000 |
|
- |
| 7.7.1(Locks: Top drawer shall be provided with single or dual control key lock having not less than 6 levers or pin cylinder lock having not less than 6 pins, with duplicate keys of stainless steel/nonferrous alloy. Alternatively if required by the purchaser a 3 wheel combination lock or electronic combination lock may be provided either in place of key lock or in addition to key lock) |
- |
15000 |
|
- |
| 7.7.2(Each drawer may also be provided with
individual key lock or pin cylinder lock or combination lock subject to agreement between the purchaser and the supplier.) |
- |
15000 |
|
- |
| 7.8(Locking Mechanism ) |
- |
15000 |
|
- |
| 7.8.1(The locking mechanism shall be such that when
the top drawer is pushed-in fully, it actuates locking
mechanism to lock all other drawers imultaneously,
when they are in pushed-in position) |
- |
15000 |
|
- |
| 7.8.1.1(At the time of locking the cabinet, if one of the
drawers is not fully pushed-in, that drawer shall remain unlocked and can be used. As soon as that drawer is pushed-in fully, it shall get locked automatically without further operation of key by the user.) |
- |
15000 |
|
- |
| 7.8.1.2(In addition to the above, isolation mechanism
shall also be provided to permit independent locking/ use of other drawers. Such isolation mechanism provided on drawers shall be manually operated) |
- |
15000 |
|
- |
| 8(Assemblies) |
- |
15000 |
|
- |
| 8.1(The components shall be assembled by bolting,
welding, riveting or by any combination of these
processes) |
- |
15000 |
|
- |
| 8.2(All joints between outer body and inner boxes,
the drawer front and the outer body shall be such that, there is minimum direct conduction of heat from outer body to inner body) |
- |
15000 |
|
- |
| 9.1(Drawer Suspension Test and Latch Test: The drawer loaded with evenly distributed load of 30 kg
(excluding the weight of drawer) in any drawer shall be operated for 5 000 cycles at a rate of 300 cycles/h ±10 percent. One opening and one closing shall constitute one cycle. The test shall be carried out with maximum two breaks by using electrically or mechanically operated test equipment with a counter fitted on it. After 5 000 cycles the suspension slide and latch mechanism shall not show any apparent distortion, cracks, or failures to operate in a normal smooth manner) |
- |
15000 |
|
- |
| 10.1(Finish: All dents, burrs and sharp edges shall be removed from the various components and they shall be thoroughly degreased and cleaned of rust and scale) |
- |
15000 |
|
- |
| 10.2(The inside and outside surfaces of the fire resisting
(Insulating) filing cabinet shall be painted or powder coated. In case of paint, an appropriate primer and undercoating shall be used in accordance to industry practices. The minimum overall thickness of the coatings shall be 50 μ for powder coating and 70 μ for liquid paint. Cross hatch test shall be conducted to confirm the adhesion of coating in accordance with 10.2.1) |
- |
15000 |
|
- |
| 10.2.1(Cross Hatch Test) |
- |
15000 |
|
- |
| 10.2.1(a) Make 6 parallel cut marks using sharp metal
pointer and straight edge, through the painted/
coated surface, so as to make the base surface
visible through cut marks) |
- |
15000 |
|
- |
| 10.2.1(b) Cut marks shall be minimum 20 mm long and
at 2 mm distance from each other) |
- |
15000 |
|
- |
| 10.2.1(c) Make 6 similar cut marks in the direction
perpendicular to first set of cut marks, with
same length and spacing) |
- |
15000 |
|
- |
| 10.2.1(d) These 12 cut marks together shall make a
pattern of 25 squares of 2 mm × 2mm size,
totally separated from each other) |
- |
15000 |
|
- |
| 10.2.1(f) To ensure continuous contact with paint/coat
film, rub the tape firmly and remove air
bubbles under the tape, if any) |
- |
15000 |
|
- |
| 10.2.1(g)Within 60 to 120 s after sticking the tape,
remove it by seizing free end of the tape and
rapidly pulling it off at an angle close to 180°.) |
- |
15000 |
|
- |
| 10.2.1(h) Painting/Coating quality is considered as
acceptable, if no part of any 2 mm × 2 mm
square of paint/coat comes off the surface due
to pulling the tape) |
- |
15000 |
|
- |
| 11.1(Fire endurance test) |
- |
15000 |
|
- |
| 11.2(Fire and impact test) |
- |
15000 |
|
- |
| 12.1(Marking of Cabinets:A metal plate showing classification of cabinet together with the manufacturer’s name, serial number and the
year of manufacture shall be fixed inside surface of
the top drawer of the cabinet in such a way that it is
visible when it is opened.) |
- |
15000 |
|
- |
| 12.2(Marking on Keys: The keys shall bear an identification number which shall not be the same as the serial number of the cabinet) |
- |
15000 |
|
- |
| 3(Types & Rating) |
- |
15000 |
|
- |
| 3.1(i) The fire resisting filing cabinets shall be of two types:
a) Vertical fire resisting filing cabinet, and
b) Lateral fire resisting filing cabinet.) |
- |
15000 |
|
- |
| 3.2(ii) The standard and lateral fire resisting filing
cabinets shall have one-drawer or two-drawers or three drawers or four-drawers. A typical drawing of the fire resisting filing cabinet is given in Fig. 1.) |
- |
15000 |
|
- |
| 3.3(iii) The fire resisting filing cabinets shall have fire
resisting ratings of 60 min or 120 min or 180 min or
240 min) |
- |
15000 |
|
- |
| 4(Dimensions and Tolerances, mm) |
- |
15000 |
|
- |
| 4.1(Overall Dimensions of Fire Resisting Filing
Cabinets: The internal usable space of the drawers of fire resisting (insulating) filing cabinets shall be as specified in Table 1 or any other size which is mutually agreed to between the purchaser and the supplier.) |
- |
15000 |
|
- |
| 4.1(Internal usuable space of drawer, mm:) |
- |
15000 |
|
- |
| 4.1(i) Height) |
- |
15000 |
|
- |
| 4.1(ii) Width) |
- |
15000 |
|
- |
| 4.1(iii) Depth) |
- |
15000 |
|
- |
| 4.1(iv) Height of the bottom drawer above floor level) |
- |
15000 |
|
- |
| 5(Materials) |
- |
15000 |
|
- |
| 6(Designations: The filing cabinet shall be designated by the commonly used name, type, the fire rating and the number of this Indian Standard.) |
- |
15000 |
|
- |
| 7(Constructions) |
- |
15000 |
|
- |
| 7.1(Outer body and Inner Box: Outer body and inner box shall be fabricated from mild steel or galvanized steel sheets of not less than 0.8 mm and not more than 1.2 mm nominal thickness. The steel shall not have any burrs or dents. If required the outer
body shall be suitably stiffened to avoid bulging) |
- |
15000 |
|
- |
| 7.2(Cabinets Sub-Assembly: The external body and drawer fronts of the fire resisting (insulating) filing cabinet shall be of double wall type with homogeneous insulating material filled in
between. Further the construction of the cabinet shall be such that each drawer slides in an individual inner box. The inner boxes shall have a insulating layer between each other to prevent fire spreading from one drawer to another. The joining of inner box, intermediate piece and outer body shall be such that, it forms a cavity to receive drawer front ) |
- |
15000 |
|
- |
| 7.3(Filing Drawer: The drawer shall be made from mild steel or galvanized steel sheet of not less than 0.6 mm and not more than 1.0 mm nominal thickness and shall have an arrangement on the sides suitable for the drawer suspension system and an arrangement to stop it when fully pushed in.) |
- |
15000 |
|
- |
| 7.3.1(Drawer Front: The drawer front shall be made from mild steel or galvanized steel sheet of not less than 0.6 mm and not more than 1.0 mm nominal thickness and shall be firmly secured to the drawer body by welding, screwing or riveting or any combination of these processes. The construction of drawer front shall be such that it snugly fits in the cavity provided for the same ) |
- |
15000 |
|
- |
| 7.4.1(Latch: Each drawer of the cabinet shall be removable but shall be fitted with a latch/positive stop to prevent inadvertent withdrawal and rebound. Such latch shall be lifted/unlocked by the pull of the handle or any other mechanism.) |
- |
15000 |
|
- |
| 7.4.2(The locking mechanism shall be designed in such
a manner so that there is minimum passage for direct
conduction of heat from outside to inside) |
- |
15000 |
|
- |
| 7.5(Drawer Suspension The drawer suspension shall be either of the following types to ensure withdrawal of the full depth of the drawer:
a) Ball bearing / Roller bearing suspension
(Movement),
b) Solid roller suspension, and
c) Telescopic slide suspension (Extension) |
- |
15000 |
|
- |
| 7.6(Handles: Each drawer shall be provided either with a handle made from ferrous/non-ferrous material suitably coated for corrosion resistance, or any polymer and fixed to the front of the drawer or with a built in pulling mechanism) |
- |
15000 |
|
- |
| 7.6.1(The drawer handle shall be strong enough to take
a minimum pull of 50 N for 2 min. There shall be no
sharp corners or edges to avoid injury and damage to clothing) |
- |
15000 |
|
- |
| 7.7.1(Locks: Top drawer shall be provided with single or dual control key lock having not less than 6 levers or pin cylinder lock having not less than 6 pins, with duplicate keys of stainless steel/nonferrous alloy. Alternatively if required by the purchaser a 3 wheel combination lock or electronic combination lock may be provided either in place of key lock or in addition to key lock) |
- |
15000 |
|
- |
| 7.7.2(Each drawer may also be provided with
individual key lock or pin cylinder lock or combination lock subject to agreement between the purchaser and the supplier.) |
- |
15000 |
|
- |
| 7.8(Locking Mechanism ) |
- |
15000 |
|
- |
| 7.8.1(The locking mechanism shall be such that when
the top drawer is pushed-in fully, it actuates locking
mechanism to lock all other drawers imultaneously,
when they are in pushed-in position) |
- |
15000 |
|
- |
| 7.8.1.1(At the time of locking the cabinet, if one of the
drawers is not fully pushed-in, that drawer shall remain unlocked and can be used. As soon as that drawer is pushed-in fully, it shall get locked automatically without further operation of key by the user.) |
- |
15000 |
|
- |
| 7.8.1.2(In addition to the above, isolation mechanism
shall also be provided to permit independent locking/ use of other drawers. Such isolation mechanism provided on drawers shall be manually operated) |
- |
15000 |
|
- |
| 8(Assemblies) |
- |
15000 |
|
- |
| 8.1(The components shall be assembled by bolting,
welding, riveting or by any combination of these
processes) |
- |
15000 |
|
- |
| 8.2(All joints between outer body and inner boxes,
the drawer front and the outer body shall be such that, there is minimum direct conduction of heat from outer body to inner body) |
- |
15000 |
|
- |
| 9.1(Drawer Suspension Test and Latch Test: The drawer loaded with evenly distributed load of 30 kg
(excluding the weight of drawer) in any drawer shall be operated for 5 000 cycles at a rate of 300 cycles/h ±10 percent. One opening and one closing shall constitute one cycle. The test shall be carried out with maximum two breaks by using electrically or mechanically operated test equipment with a counter fitted on it. After 5 000 cycles the suspension slide and latch mechanism shall not show any apparent distortion, cracks, or failures to operate in a normal smooth manner) |
- |
15000 |
|
- |
| 10.1(Finish: All dents, burrs and sharp edges shall be removed from the various components and they shall be thoroughly degreased and cleaned of rust and scale) |
- |
15000 |
|
- |
| 10.2(The inside and outside surfaces of the fire resisting
(Insulating) filing cabinet shall be painted or powder coated. In case of paint, an appropriate primer and undercoating shall be used in accordance to industry practices. The minimum overall thickness of the coatings shall be 50 μ for powder coating and 70 μ for liquid paint. Cross hatch test shall be conducted to confirm the adhesion of coating in accordance with 10.2.1) |
- |
15000 |
|
- |
| 10.2.1(Cross Hatch Test) |
- |
15000 |
|
- |
| 10.2.1(a) Make 6 parallel cut marks using sharp metal
pointer and straight edge, through the painted/
coated surface, so as to make the base surface
visible through cut marks) |
- |
15000 |
|
- |
| 10.2.1(b) Cut marks shall be minimum 20 mm long and
at 2 mm distance from each other) |
- |
15000 |
|
- |
| 10.2.1(c) Make 6 similar cut marks in the direction
perpendicular to first set of cut marks, with
same length and spacing) |
- |
15000 |
|
- |
| 10.2.1(d) These 12 cut marks together shall make a
pattern of 25 squares of 2 mm × 2mm size,
totally separated from each other) |
- |
15000 |
|
- |
| 10.2.1(f) To ensure continuous contact with paint/coat
film, rub the tape firmly and remove air
bubbles under the tape, if any) |
- |
15000 |
|
- |
| 10.2.1(g)Within 60 to 120 s after sticking the tape,
remove it by seizing free end of the tape and
rapidly pulling it off at an angle close to 180°.) |
- |
15000 |
|
- |
| 10.2.1(h) Painting/Coating quality is considered as
acceptable, if no part of any 2 mm × 2 mm
square of paint/coat comes off the surface due
to pulling the tape) |
- |
15000 |
|
- |
| 11.1(Fire endurance test) |
- |
150000 |
|
- |
| 11.2(Fire and impact test) |
- |
150000 |
|
- |
| 12.1(Marking of Cabinets:A metal plate showing classification of cabinet together with the manufacturer’s name, serial number and the
year of manufacture shall be fixed inside surface of
the top drawer of the cabinet in such a way that it is
visible when it is opened.) |
- |
5000 |
|
- |
| 12.2(Marking on Keys: The keys shall bear an identification number which shall not be the same as the serial number of the cabinet) |
- |
5000 |
|
- |
|
14 Nov, 2027 |
-
Included w.e.f. 28.03.2025 |
| 6055 |
URS PRODUCTS AND TESTING PVT. LTD. (A29), NOIDA
| 8168906
| IS 21 (1992) |
Wrought aluminium and aluminium alloys for manufacture of utensils specification (Fourth Revision) |
- |
15000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4.1, & 4.1.1(Lead) |
- |
1500 |
|
- |
| 4.1.2(Aluminium) |
- |
800 |
|
- |
| 4.2,
Table 1of IS:21 (Designation 64430)(Aluminium) |
- |
800 |
|
- |
| 4.2,
Table 1of IS:21 (Designation 64430)(Lead) |
- |
800 |
|
- |
| 4.2,
Table 1of IS:21 (Designation 64430)(Chromium) |
- |
800 |
|
- |
| 4.2,
Table 1of IS:21 (Designation 64430)(Titanium and or other grain refining elements) |
- |
800 |
|
- |
| 4.2,
Table 1of IS:21 (Designation 64430)(Zinc) |
- |
800 |
|
- |
| 4.2,
Table 1of IS:21 (Designation 64430)(Manganese) |
- |
800 |
|
- |
| 4.2,
Table 1of IS:21 (Designation 64430)(Iron) |
- |
800 |
|
- |
| 4.2,
Table 1of IS:21 (Designation 40800)(Silicon) |
- |
800 |
|
- |
| 4.2,
Table 1of IS:21 (Designation 64430)(Magnesium) |
- |
800 |
|
- |
| 4.2,
Table 1of IS:21 (Designation 64430)(Copper) |
- |
800 |
|
- |
| 4.2,
Table 1of IS:21 (Designation 51000-B)(Aluminium) |
- |
800 |
|
- |
| 4.2,
Table 1of IS:21 (Designation 51000-B)(Lead) |
- |
800 |
|
- |
| 4.2,
Table 1of IS:21 (Designation 51000-B)(Chromium) |
- |
800 |
|
- |
| 4.2,
Table 1of IS:21 (Designation 51000-B)(Zinc) |
- |
800 |
|
- |
| 4.2,
Table 1of IS:21 (Designation 51000-B)(Manganese) |
- |
800 |
|
- |
| 4.2,
Table 1of IS:21 (Designation 51000-B)(Iron) |
- |
800 |
|
- |
| 4.2,
Table 1of IS:21 (Designation 51000-B)(Silicon) |
- |
800 |
|
- |
| 4.2,
Table 1of IS:21 (Designation 51000-B)(Magnesium) |
- |
800 |
|
- |
| 4.2,
Table 1of IS:21 (Designation 51000-B)(Copper) |
- |
800 |
|
- |
| 4.2,
Table 1of IS:21 (Designation 51000-A)(Aluminium) |
- |
800 |
|
- |
| 4.2,
Table 1of IS:21 (Designation 51000-A)(Lead) |
- |
800 |
|
- |
| 4.2,
Table 1of IS:21 (Designation 51000-A)(Chromium) |
- |
800 |
|
- |
| 4.2,
Table 1of IS:21 (Designation 51000-A)(Zinc) |
- |
800 |
|
- |
| 4.2,
Table 1of IS:21 (Designation 51000-A)(Manganese) |
- |
800 |
|
- |
| 4.2,
Table 1of IS:21 (Designation 51000-A)(Iron) |
- |
800 |
|
- |
| 4.2,
Table 1of IS:21 (Designation 51000-A)(Silicon) |
- |
800 |
|
- |
| 4.2,
Table 1of IS:21 (Designation 51000-A)(Magnesium) |
- |
800 |
|
- |
| 4.2,
Table 1of IS:21 (Designation 51000-A)(Copper) |
- |
800 |
|
- |
| 4.2,
Table 1of IS:21 (Designation 40800)(Aluminium) |
- |
800 |
|
- |
| 4.2,
Table 1of IS:21 (Designation 40800)(Lead) |
- |
800 |
|
- |
| 4.2,
Table 1of IS:21 (Designation 40800)(Titanium and or other grain refining elements) |
- |
800 |
|
- |
| 4.2,
Table 1of IS:21 (Designation 40800)(Zinc) |
- |
800 |
|
- |
| 4.2,
Table 1of IS:21 (Designation 40800)(Manganese) |
- |
800 |
|
- |
| 4.2,
Table 1of IS:21 (Designation 40800)(Iron) |
- |
800 |
|
- |
| 4.2,
Table 1of IS:21 (Designation 40800)(Magnesium) |
- |
800 |
|
- |
| 4.2,
Table 1of IS:21 (Designation 40800)(Copper) |
- |
800 |
|
- |
| 4.2,
Table 1of IS:21 (Designation 31500)(Aluminium) |
- |
800 |
|
- |
| 4.2,
Table 1of IS:21 (Designation 31500)(Titanium and or other grain refining elements) |
- |
800 |
|
- |
| 4.2,
Table 1of IS:21 (Designation 31500)(Lead) |
- |
800 |
|
- |
| 4.2,
Table 1of IS:21 (Designation 31500)(Zinc) |
- |
800 |
|
- |
| 4.2,
Table 1of IS:21 (Designation 31500)(Manganese) |
- |
800 |
|
- |
| 4.2,
Table 1of IS:21 (Designation 31500)(Iron) |
- |
800 |
|
- |
| 4.2,
Table 1of IS:21 (Designation 31500)(Silicon) |
- |
800 |
|
- |
| 4.2,
Table 1of IS:21 (Designation 31500)(Magnesium) |
- |
800 |
|
- |
| 4.2,
Table 1of IS:21 (Designation 31500)(Copper) |
- |
800 |
|
- |
| 4.2,
Table 1of IS:21 (Designation 31000)(Aluminium) |
- |
800 |
|
- |
| 4.2,
Table 1of IS:21 (Designation 31000)(Lead) |
- |
800 |
|
- |
| 4.2,
Table 1of IS:21 (Designation 31000)(Chromium) |
- |
800 |
|
- |
| 4.2,
Table 1of IS:21 (Designation 31000)(Titanium and or other grain refining elements) |
- |
800 |
|
- |
| 4.2,
Table 1of IS:21 (Designation 31000)(Zinc) |
- |
800 |
|
- |
| 4.2,
Table 1of IS:21 (Designation 31000)(Manganese) |
- |
800 |
|
- |
| 4.2,
Table 1of IS:21 (Designation 31000)(Iron) |
- |
800 |
|
- |
| 4.2,
Table 1of IS:21 (Designation 31000)(Silicon) |
- |
800 |
|
- |
| 4.2,
Table 1of IS:21 (Designation 31000)(Magnesium) |
- |
800 |
|
- |
| 4.2,
Table 1of IS:21 (Designation 31000)(Copper) |
- |
800 |
|
- |
| 4.2,
Table 1of IS:21 (Designation 19600)(Aluminium) |
- |
800 |
|
- |
| 4.2,
Table 1of IS:21 (Designation 19600)(Cu+Si+Fe+Mn+Zn) |
- |
800 |
|
- |
| 4.2,
Table 1of IS:21 (Designation 19500)(Aluminium) |
- |
800 |
|
- |
| 4.2,
Table 1of IS:21 (Designation 19500)(Cu+Si+Fe+Mn+Zn) |
- |
800 |
|
- |
| 4.2,
Table 1of IS:21 (Designation 19000)(Cu+Mg+Si+Fe+Mn+Zn) |
- |
800 |
|
- |
| 4.2,
Table 1of IS:21 (Designation 19000)(Aluminium) |
- |
800 |
|
- |
| 4.2,
Table 1of IS:21 (Designation 19600)(Lead) |
- |
800 |
|
- |
| 4.2,
Table 1of IS:21 (Designation 19500)(Lead) |
- |
800 |
|
- |
| 4.2,
Table 1of IS:21 (Designation 19000)(Lead) |
- |
800 |
|
- |
| 4.2,
Table 1of IS:21 (Designation 19600)(Zinc) |
- |
800 |
|
- |
| 4.2,
Table 1of IS:21 (Designation 19500)(Zinc) |
- |
800 |
|
- |
| 4.2,
Table 1of IS:21 (Designation 19000)(Zinc) |
- |
800 |
|
- |
| 4.2,
Table 1of IS:21 (Designation 19600)(Manganese) |
- |
800 |
|
- |
| 4.2,
Table 1of IS:21 (Designation 19500)(Manganese) |
- |
800 |
|
- |
| 4.2,
Table 1of IS:21 (Designation 19000)(Manganese) |
- |
800 |
|
- |
| 4.2,
Table 1of IS:21 (Designation 19600)(Iron) |
- |
800 |
|
- |
| 4.2,
Table 1of IS:21 (Designation 19500)(Iron) |
- |
800 |
|
- |
| 4.2,
Table 1of IS:21 (Designation 19000)(Iron) |
- |
800 |
|
- |
| 4.2,
Table 1of IS:21 (Designation 19600)(Silicon) |
- |
800 |
|
- |
| 4.2,
Table 1of IS:21 (Designation 19500)(Silicon) |
- |
800 |
|
- |
| 4.2,
Table 1of IS:21 (Designation 19000)(Silicon) |
- |
800 |
|
- |
| 4.2,
Table 1of IS:21 (Designation 19600)(Copper) |
- |
800 |
|
- |
| 4.2,
Table 1of IS:21 (Designation 19500)(Copper) |
- |
800 |
|
- |
| 4.2,
Table 1of IS:21 (Designation 19000)(Copper) |
- |
800 |
|
- |
| 4.2,
Table 1of IS:21 (Designation 19000)(Magnesium) |
- |
800 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 64430, WP')(Tensile Strength) |
- |
2000 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 64430, 'W')(Tensile Strength) |
- |
2000 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 64430, 'O')(Tensile Strength) |
- |
2000 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 51000-B, 'H4')(Tensile Strength) |
- |
2000 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 51000-B, 'H3')(Tensile Strength) |
- |
2000 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 51000-B, 'H2')(Tensile Strength) |
- |
2000 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 51000-B, 'H1')(Tensile Strength) |
- |
2000 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 51000-A, 'H3')(Tensile Strength) |
- |
2000 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 51000-A, 'H2')(Tensile Strength) |
- |
2000 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 51000-A, 'H1')(Tensile Strength) |
- |
2000 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 51000-A, 'O')(Tensile Strength) |
- |
2000 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 40800, 'H4')(Tensile Strength) |
- |
2000 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 40800, 'H3')(Tensile Strength) |
- |
2000 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 40800, 'H2')(Tensile Strength) |
- |
2000 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 40800, 'H1')(Tensile Strength) |
- |
2000 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 40800, 'O')(Tensile Strength) |
- |
2000 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 31500, 'H4')(Tensile Strength) |
- |
2000 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 31500, 'H3')(Tensile Strength) |
- |
2000 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 31500, 'H2')(Tensile Strength) |
- |
2000 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 31500, 'H1')(Tensile Strength) |
- |
2000 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 31500, 'O')(Tensile Strength) |
- |
2000 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 31000, 'H4')(Tensile Strength) |
- |
2000 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 31000, 'H3')(Tensile Strength) |
- |
2000 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 31000, 'H2')(Tensile Strength) |
- |
2000 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 31000, 'H1')(Tensile Strength) |
- |
2000 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 31000, 'O')(Tensile Strength) |
- |
2000 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 19600, 'H4')(Tensile Strength) |
- |
2000 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 19600, 'H2')(Tensile Strength) |
- |
2000 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 19600, 'O')(Tensile Strength) |
- |
2000 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 19500, 'H4')(Tensile Strength) |
- |
2000 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 19500, 'H2')(Tensile Strength) |
- |
2000 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 19500, 'O')(Tensile Strength) |
- |
2000 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 19000, 'H4')(Tensile Strength) |
- |
2000 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 19000, 'H3')(Tensile Strength) |
- |
2000 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 19000, 'H2')(Tensile Strength) |
- |
2000 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 19000, 'H1')(Tensile Strength) |
- |
2000 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 19000, 'O')(Tensile Strength) |
- |
2000 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 64430, WP')(0.2 Percent Proof Stress) |
- |
2000 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 64430, 'W')(0.2 Percent Proof Stress) |
- |
2000 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 51000-B, 'H3')(0.2 Percent Proof Stress) |
- |
2000 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 51000-B, 'H2')(0.2 Percent Proof Stress) |
- |
2000 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 51000-B, 'H1')(0.2 Percent Proof Stress) |
- |
2000 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 51000-A, 'H3')(0.2 Percent Proof Stress) |
- |
2000 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 51000-A, 'H2')(0.2 Percent Proof Stress) |
- |
2000 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 51000-A, 'H1')(0.2 Percent Proof Stress) |
- |
2000 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 64430, WP')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm)) |
- |
2000 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 64430, 'W')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm)) |
- |
2000 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 64430, 'O')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm)) |
- |
2000 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 51000-B, 'H4')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm)) |
- |
2000 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 51000-B, 'H3')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm)) |
- |
2000 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 51000-B, 'H2')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm)) |
- |
2000 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 51000-B, 'H1')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm)) |
- |
2000 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 51000-A, 'H3')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm)) |
- |
2000 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 51000-A, 'H2')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm)) |
- |
2000 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 51000-A, 'H1')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm)) |
- |
2000 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 51000-A, 'O')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm)) |
- |
2000 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 40800, 'H4')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm)) |
- |
2000 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 40800, 'H3')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm)) |
- |
2000 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 40800, 'H2')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm)) |
- |
2000 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 40800, 'H1')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm)) |
- |
2000 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 40800, 'O')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm)) |
- |
2000 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 31500, 'H4')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm)) |
- |
2000 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 31500, 'H3')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm)) |
- |
2000 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 31500, 'H2')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm)) |
- |
2000 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 31500, 'H1')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm)) |
- |
2000 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 31500, 'O')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm)) |
- |
2000 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 31000, 'H4')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm)) |
- |
2000 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 31000, 'H3')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm)) |
- |
2000 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 31000, 'H2')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm)) |
- |
2000 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 31000, 'H1')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm)) |
- |
2000 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 31000, 'O')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm)) |
- |
2000 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 19600, 'H4')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm)) |
- |
2000 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 19600, 'H2')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm)) |
- |
2000 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 19600, 'O')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm)) |
- |
2000 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 19500, 'H4')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm)) |
- |
2000 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 19500, 'H2')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm)) |
- |
2000 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 19500, 'O')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm)) |
- |
2000 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 19000, 'H4')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm)) |
- |
2000 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 19000, 'H3')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm)) |
- |
2000 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 19000, 'H2')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm)) |
- |
2000 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 19000, 'H1')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm)) |
- |
2000 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 19000, 'O')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm)) |
- |
2000 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 64430, WP')(Bend Test (Radius of Bend)) |
- |
2000 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 64430, 'W')(Bend Test (Radius of Bend)) |
- |
2000 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 64430, 'O')(Bend Test (Radius of Bend)) |
- |
2000 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 51000-B, 'H4')(Bend Test (Radius of Bend)) |
- |
2000 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 51000-B, 'H3')(Bend Test (Radius of Bend)) |
- |
2000 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 51000-B, 'H2')(Bend Test (Radius of Bend)) |
- |
2000 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 51000-B, 'H1')(Bend Test (Radius of Bend)) |
- |
2000 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 51000-A, 'H3')(Bend Test (Radius of Bend)) |
- |
2000 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 51000-A, 'H2')(Bend Test (Radius of Bend)) |
- |
2000 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 51000-A, 'H1')(Bend Test (Radius of Bend)) |
- |
2000 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 51000-A, 'O')(Bend Test (Radius of Bend)) |
- |
2000 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 40800, 'H4')(Bend Test (Radius of Bend)) |
- |
2000 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 40800, 'H3')(Bend Test (Radius of Bend)) |
- |
2000 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 40800, 'H2')(Bend Test (Radius of Bend)) |
- |
2000 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 40800, 'H1')(Bend Test (Radius of Bend)) |
- |
2000 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 40800, 'O')(Bend Test (Radius of Bend)) |
- |
2000 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 31500, 'H4')(Bend Test (Radius of Bend)) |
- |
2000 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 31500, 'H3')(Bend Test (Radius of Bend)) |
- |
2000 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 31500, 'H2')(Bend Test (Radius of Bend)) |
- |
2000 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 31500, 'H1')(Bend Test (Radius of Bend)) |
- |
2000 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 31500, 'O')(Bend Test (Radius of Bend)) |
- |
2000 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 31000, 'H4')(Bend Test (Radius of Bend)) |
- |
2000 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 31000, 'H3')(Bend Test (Radius of Bend)) |
- |
2000 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 31000, 'H2')(Bend Test (Radius of Bend)) |
- |
2000 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 31000, 'H1')(Bend Test (Radius of Bend)) |
- |
2000 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 31000, 'O')(Bend Test (Radius of Bend)) |
- |
2000 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 19600, 'H4')(Bend Test (Radius of Bend)) |
- |
2000 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 19600, 'H2')(Bend Test (Radius of Bend)) |
- |
2000 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 19600, 'O')(Bend Test (Radius of Bend)) |
- |
2000 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 19500, 'H4')(Bend Test (Radius of Bend)) |
- |
2000 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 19500, 'H2')(Bend Test (Radius of Bend)) |
- |
2000 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 19500, 'O')(Bend Test (Radius of Bend)) |
- |
2000 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 19000, 'H4')(Bend Test (Radius of Bend)) |
- |
2000 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 19000, 'H3')(Bend Test (Radius of Bend)) |
- |
2000 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 19000, 'H2')(Bend Test (Radius of Bend)) |
- |
2000 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 19000, 'H1')(Bend Test (Radius of Bend)) |
- |
2000 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 19000, 'O')(Bend Test (Radius of Bend)) |
- |
2000 |
|
- |
| 5(Marking) |
- |
300 |
|
- |
|
- |
-
- |
| 6056 |
Ace Test Labs & Metrology Pvt. Ltd., Sonipat
| 9162826
| IS 11188 : Part 1 (2021) |
Vault Strong Room doors Part 1 specification |
- |
298000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 11.1 (3)(Fire and stream hose IS 11188 (Part 3)) |
- |
15000 |
|
- |
| 11.1 (2)(Fire endurance IS 11188 (Part 3)) |
- |
150000 |
|
- |
| 11.1 (1)(Burglary resistance IS 11188 (Part 2)) |
- |
150000 |
|
- |
| 10.4(Alternate to Cl 10.4) |
- |
15000 |
|
- |
| 10.3(Cross Hatch Test) |
- |
15000 |
|
- |
| 10(FINISH) |
- |
15000 |
|
- |
| 9.4(Vault Lighting Control) |
- |
15000 |
|
- |
| 9.3(Foot Bridge) |
- |
15000 |
|
- |
| 9.2(Handles) |
- |
15000 |
|
- |
| 9.1.1(Adjusting Bolt) |
- |
15000 |
|
- |
| 9.1(Hinges) |
- |
15000 |
|
- |
| 9(DOOR FITTINGS) |
- |
15000 |
|
- |
| 8.4.5(Automatic Relocking Device) |
- |
15000 |
|
- |
| 8.4.4(Time Lock) |
- |
15000 |
|
- |
| 8.4(Lock) |
- |
15000 |
|
- |
| 8.3.2.2(Construction) |
- |
15000 |
|
- |
| 8.3.2.1(The number of bolts and their minimum dimension) |
- |
15000 |
|
- |
| 8.3.2(Bolt Work) |
- |
15000 |
|
- |
| 8.3.1(Lock Case) |
- |
15000 |
|
- |
| 8.3(Locking Mechanism) |
- |
15000 |
|
- |
| 8.2.3(Crane Hinge Mechanism) |
- |
15000 |
|
- |
| 8.2.2(Compression Mechanism) |
- |
15000 |
|
- |
| 8.2.1(Rebate of the Door Frame) |
- |
15000 |
|
- |
| 8.2(Doors Frame) |
- |
15000 |
|
- |
| 8.1.2(Main Door (Outside)) |
- |
15000 |
|
- |
| 8.1.1(Ventilating Grill Gate (Inside)) |
- |
15000 |
|
- |
| 8.1 Fig. 1(Doors) |
- |
15000 |
|
- |
| 8(CONSTRUCTION AND GENERALREQUIREMENTS) |
- |
15000 |
|
- |
| 5 Table 1(bolts, Min) |
- |
15000 |
|
- |
| 5 Table 1(xix) Depth of engagement of shooting) |
- |
15000 |
|
- |
| 5 Table 1(cross sectional area, Min,sq mm) |
- |
15000 |
|
- |
| 5 Table 1(xviii) Diameter of shooting bolts, Min) |
- |
15000 |
|
- |
| 5 Table 1(xvi) Number of shooting bolts at top,Min) |
- |
15000 |
|
- |
| 5 Table 1(xv) Number of shooting bolts on opposite side,Min) |
- |
15000 |
|
- |
| 5 Table 1(xiv) Number of shooting bolts on hinge side, Min) |
- |
15000 |
|
- |
| 5 Table 1(xiii) Number of locks) |
- |
15000 |
|
- |
| 5 Table 1(xii) Wall thickness (recommendation)) |
- |
15000 |
|
- |
| 5 Table 1(xi) Thickness of drill and oxyacetylene
torch resisting layer (excluding mild steel plates),Min) |
- |
15000 |
|
- |
| 5 Table 1(ix) Thickness of doors slab, thickness over rebate) |
- |
15000 |
|
- |
| 5 Table 1(viii) Pitch of grill gate rods) |
- |
15000 |
|
- |
| 5 Table 1(vii) Diameter of grill gate rods, Min) |
- |
15000 |
|
- |
| 5 Table 1(vi) Thickens of grill gate angles or
section made out of M.S. plates, Min) |
- |
15000 |
|
- |
| 5 Table 1(v) Dimension of the rebate coming under shear) |
- |
15000 |
|
- |
| 5 Table 1(iv (b) Thickness of door frame, if
fabricated from single plate to form
channel/multi-bend section, Min) |
- |
15000 |
|
- |
| 5 Table 1(ii (a) Height H, Min b) Width W, Min
iv(a) Thickness of door frame angle,
channel or section made out of M.S.
plates, if built up to form a channel,Min) |
- |
15000 |
|
- |
| 5 Table 1(iii) Inside dimension or clear opening when
door shutters are swung open at 180 degree) |
- |
15000 |
|
- |
| 5 Table 1(ii (b) Width W) |
- |
15000 |
|
- |
| 5 Table 1(ii (a) Height, H) |
- |
15000 |
|
- |
| 5 Table 1(ii) Overall dimension of vault door) |
- |
15000 |
|
- |
| 5 Table 1(i) Door Type) |
- |
15000 |
|
- |
| 4(Type) |
- |
15000 |
|
- |
| 5(Table-1)(Type of Door) |
- |
15000 |
|
- |
| 5(Table-1)(Overall dimesion of door) |
- |
15000 |
|
- |
| 5(Table-1)(Inside dimension or clear opening of door) |
- |
15000 |
|
- |
| 5(Table-1)(Thickness of door frame angle-made of Plate,if bulit up to form a channel) |
- |
15000 |
|
- |
| 5(Table-1)(Thickness of door frame ,if fabricated or multibend) |
- |
15000 |
|
- |
| 5(Table-1)(Dimension of the rebate coming under share) |
- |
15000 |
|
- |
| 5(Table-1)(Thickness of grill gate angle/section) |
- |
15000 |
|
- |
| 5(Table-1)(Diameter of grill gate rod) |
- |
15000 |
|
- |
| 5(Table-1)(Pitch of grill gate rod) |
- |
15000 |
|
- |
| 5(Table-1)(Thickness of door slab,thickness over rebate) |
- |
15000 |
|
- |
| 5(Table-1)(Thickness of the door over lock) |
- |
15000 |
|
- |
| 5(Table-1)(Thickness of drill & oxyacetylene torch resis. layer(exclue MS plate) |
- |
15000 |
|
- |
| 5(Table-1)(Wall thickness) |
- |
15000 |
|
- |
| 5(Table-1)(Number of locks) |
- |
15000 |
|
- |
| 5(Table-1)(Number of shooting bolys on hinge side) |
- |
15000 |
|
- |
| 5(Table-1)(Number of shooting bolts on opposite) |
- |
15000 |
|
- |
| 5(Table-1)(Number of shooting bolts at top) |
- |
15000 |
|
- |
| 5(Table-1)(Number of shooting bolts at bottom) |
- |
15000 |
|
- |
| 5(Table-1)(Cross sectional area as per shooting bolt) |
- |
15000 |
|
- |
| 5(Table-1)(Depth engagement of shooting) |
- |
15000 |
|
- |
| 6(Materail) |
- |
15000 |
|
- |
| 7(Classification) |
- |
15000 |
|
- |
| 8 & 8.1.1(Ventilating Grill Gate (Inside)) |
- |
15000 |
|
- |
| 8.1.1.1(Locking device (unpickable dual control lock)) |
- |
15000 |
|
- |
| 8.1.2(Main Door- Outer & inner plate thickness) |
- |
15000 |
|
- |
| 8.1.2.1(Door(Finish &Gap of frame/edge with any place)) |
- |
15000 |
|
- |
| 8.2(Door frame (No.of barckets & Size for gripping)) |
- |
15000 |
|
- |
| 8.2.1(Rebate of the door frame) |
- |
15000 |
|
- |
| 8.2.2(Compression mechanism) |
- |
15000 |
|
- |
| 8.2.3(Crane hinge mechanism) |
- |
15000 |
|
- |
| 8.3(Lock case) |
- |
15000 |
|
- |
| 8.3.2(Bolt work) |
- |
15000 |
|
- |
| 8.3.2.2(Construction (of bolt work)) |
- |
15000 |
|
- |
| 8.3.2.3(Bearing piller) |
- |
15000 |
|
- |
| 8.4.1(Shooting bolt control (By lock)) |
- |
15000 |
|
- |
| 8.4.2(Test of key-Lock) |
- |
15000 |
|
- |
| 8.4.3(Lock fixing bolts) |
- |
15000 |
|
- |
| 8.4.4(Time lock) |
- |
15000 |
|
- |
| 8.4.5(Automatic Relocking devise) |
- |
15000 |
|
- |
| 9 &9.1(Hinges) |
- |
15000 |
|
- |
| 9.1.1(Adjusting bolt) |
- |
15000 |
|
- |
| 9.2(Handles) |
- |
15000 |
|
- |
| 9.3(Foot bringe) |
- |
15000 |
|
- |
| 9.4(Vault lighting control) |
- |
15000 |
|
- |
| 10 &10.1(Dents,Burrs & Edges) |
- |
15000 |
|
- |
| 10.2(Colour coating thickness (Surafce paint)) |
- |
15000 |
|
- |
| 10.3(Cross Hatch test) |
- |
15000 |
|
- |
| 10.4(Door (Stainless cladding)) |
- |
15000 |
|
- |
| 11.1 &11.2(Test criteria for confomity -Burglaty attack) |
- |
15000 |
|
- |
| 11.1 &11.2(Test criteria for confomity -Fire resistancey) |
- |
15000 |
|
- |
| 12(Marking of door) |
- |
15000 |
|
- |
| 12.2(Marking on keys) |
- |
15000 |
|
- |
| 4(Type) |
- |
15000 |
|
- |
| 5(Table-1)(5(Table-1)) |
- |
15000 |
|
- |
| 5(Table-1)(Overall dimesion of door) |
- |
15000 |
|
- |
| 5(Table-1)(Inside dimension or clear opening of door) |
- |
15000 |
|
- |
| 5(Table-1)(Thickness of door frame angle-made of Plate,if bulit up to form a channel) |
- |
15000 |
|
- |
| 5(Table-1)(Thickness of door frame ,if fabricated or multibend) |
- |
15000 |
|
- |
| 5(Table-1)(Dimension of the rebate coming under share) |
- |
15000 |
|
- |
| 5(Table-1)(Thickness of grill gate angle/section) |
- |
15000 |
|
- |
| 5(Table-1)(Diameter of grill gate rod) |
- |
15000 |
|
- |
| 5(Table-1)(Pitch of grill gate rod) |
- |
15000 |
|
- |
| 5(Table-1)(Thickness of door slab,thickness over rebate) |
- |
15000 |
|
- |
| 5(Table-1)(Thickness of the door over lock) |
- |
15000 |
|
- |
| 5(Table-1)(Thickness of drill & oxyacetylene torch resis. layer(exclue MS plate) |
- |
15000 |
|
- |
| 5(Table-1)(Wall thickness) |
- |
15000 |
|
- |
| 5(Table-1)(Number of locks) |
- |
15000 |
|
- |
| 5(Table-1)(Number of shooting bolys on hinge side) |
- |
15000 |
|
- |
| 5(Table-1)(Number of shooting bolts at top) |
- |
15000 |
|
- |
| 5(Table-1)(Number of shooting bolts at bottom) |
- |
15000 |
|
- |
| 5(Table-1)(Cross sectional area as per shooting bolt) |
- |
15000 |
|
- |
| 5(Table-1)(Depth engagement of shooting) |
- |
15000 |
|
- |
| 6(Materail) |
- |
15000 |
|
- |
| 7(Classification) |
- |
15000 |
|
- |
| 8 & 8.1.1(Ventilating Grill Gate (Inside)) |
- |
15000 |
|
- |
| 8.1.1.1(Locking device (unpickable dual control lock)) |
- |
15000 |
|
- |
| 8.1.2(Main Door- Outer & inner plate thickness) |
- |
15000 |
|
- |
| 8.1.2.1(Door(Finish &Gap of frame/edge with any place)) |
- |
15000 |
|
- |
| 8.2(Door frame (No.of barckets & Size for gripping)) |
- |
15000 |
|
- |
| 8.2.1(Rebate of the door frame) |
- |
15000 |
|
- |
| 8.2.2(Compression mechanism) |
- |
15000 |
|
- |
| 8.2.3(Crane hinge mechanism) |
- |
15000 |
|
- |
| 8.3(Lock case) |
- |
15000 |
|
- |
| 8.3.2(Bolt work) |
- |
15000 |
|
- |
| 8.3.2.2(Construction (of bolt work)) |
- |
15000 |
|
- |
| 8.3.2.3(Bearing piller) |
- |
15000 |
|
- |
| 8.4.1(Shooting bolt control (By lock)) |
- |
15000 |
|
- |
| 8.4.2(Test of key-Lock) |
- |
15000 |
|
- |
| 8.4.3(Lock fixing bolts) |
- |
15000 |
|
- |
| 8.4.4(Time lock) |
- |
15000 |
|
- |
| 8.4.5(Automatic Relocking devise) |
- |
15000 |
|
- |
| 9 &9.1(Hinges) |
- |
15000 |
|
- |
| 9.1.1(Adjusting bolt) |
- |
15000 |
|
- |
| 9.3(Foot bringe) |
- |
15000 |
|
- |
| 9.4(Vault lighting control) |
- |
15000 |
|
- |
| 10 &10.1(Dents,Burrs & Edges) |
- |
15000 |
|
- |
| 10.2(Colour coating thickness (Surafce paint)) |
- |
15000 |
|
- |
| 10.3(Cross Hatch test) |
- |
15000 |
|
- |
| 10.4(Door (Stainless cladding)) |
- |
15000 |
|
- |
| 11.1 &11.2(Test criteria for confomity -Burglaty attack) |
- |
15000 |
|
- |
| 11.1 &11.2(Test criteria for confomity -Fire resistancey) |
- |
15000 |
|
- |
| 12(Marking of door) |
- |
15000 |
|
- |
| 12.2(Marking on keys) |
- |
15000 |
|
- |
| 11.1 (3)(Fire and stream hose IS 11188 (Part 3)) |
- |
15000 |
|
- |
| 11.1 (2)(Fire endurance IS 11188 (Part 3)) |
- |
150000 |
|
- |
| 11.1 (1)(Burglary resistance IS 11188 (Part 2)) |
- |
150000 |
|
- |
| 10.4(Alternate to Cl 10.4) |
- |
15000 |
|
- |
| 10.3(Cross Hatch Test) |
- |
15000 |
|
- |
| 10(FINISH) |
- |
15000 |
|
- |
| 9.4(Vault Lighting Control) |
- |
15000 |
|
- |
| 9.3(Foot Bridge) |
- |
15000 |
|
- |
| 9.2(Handles) |
- |
15000 |
|
- |
| 9.1.1(Adjusting Bolt) |
- |
15000 |
|
- |
| 9.1(Hinges) |
- |
15000 |
|
- |
| 9(DOOR FITTINGS) |
- |
15000 |
|
- |
| 8.4.5(Automatic Relocking Device) |
- |
15000 |
|
- |
| 8.4.4(Time Lock) |
- |
15000 |
|
- |
| 8.4(Lock) |
- |
15000 |
|
- |
| 8.3.2.2(Construction) |
- |
15000 |
|
- |
| 8.3.2.1(The number of bolts and their minimum dimension) |
- |
15000 |
|
- |
| 8.3.2(Bolt Work) |
- |
15000 |
|
- |
| 8.3.1(Lock Case) |
- |
15000 |
|
- |
| 8.3(Locking Mechanism) |
- |
15000 |
|
- |
| 8.2.3(Crane Hinge Mechanism) |
- |
15000 |
|
- |
| 8.2.2(Compression Mechanism) |
- |
15000 |
|
- |
| 8.2.1(Rebate of the Door Frame) |
- |
15000 |
|
- |
| 8.2(Doors Frame) |
- |
15000 |
|
- |
| 8.1.2(Main Door (Outside)) |
- |
15000 |
|
- |
| 8.1.1(Ventilating Grill Gate (Inside)) |
- |
15000 |
|
- |
| 8.1 Fig. 1(Doors) |
- |
15000 |
|
- |
| 8(CONSTRUCTION AND GENERALREQUIREMENTS) |
- |
15000 |
|
- |
| 5 Table 1(bolts, Min) |
- |
15000 |
|
- |
| 5 Table 1(xix) Depth of engagement of shooting) |
- |
15000 |
|
- |
| 5 Table 1(cross sectional area, Min,sq mm) |
- |
15000 |
|
- |
| 5 Table 1(xviii) Diameter of shooting bolts, Min) |
- |
15000 |
|
- |
| 5 Table 1(xvi) Number of shooting bolts at top,Min) |
- |
15000 |
|
- |
| 5 Table 1(xv) Number of shooting bolts on opposite side,Min) |
- |
15000 |
|
- |
| 5 Table 1(xiv) Number of shooting bolts on hinge side, Min) |
- |
15000 |
|
- |
| 5 Table 1(xiii) Number of locks) |
- |
15000 |
|
- |
| 5 Table 1(xii) Wall thickness (recommendation)) |
- |
15000 |
|
- |
| 5 Table 1(xi) Thickness of drill and oxyacetylene
torch resisting layer (excluding mild steel plates),Min) |
- |
15000 |
|
- |
| 5 Table 1(ix) Thickness of doors slab, thickness over rebate) |
- |
15000 |
|
- |
| 5 Table 1(viii) Pitch of grill gate rods) |
- |
15000 |
|
- |
| 5 Table 1(vii) Diameter of grill gate rods, Min) |
- |
15000 |
|
- |
| 5 Table 1(vi) Thickens of grill gate angles or
section made out of M.S. plates, Min) |
- |
15000 |
|
- |
| 5 Table 1(v) Dimension of the rebate coming under shear) |
- |
15000 |
|
- |
| 5 Table 1(iv (b) Thickness of door frame, if
fabricated from single plate to form
channel/multi-bend section, Min) |
- |
15000 |
|
- |
| 5 Table 1(ii (a) Height H, Min b) Width W, Min
iv(a) Thickness of door frame angle,
channel or section made out of M.S.
plates, if built up to form a channel,Min) |
- |
15000 |
|
- |
| 5 Table 1(iii) Inside dimension or clear opening when
door shutters are swung open at 180 degree) |
- |
15000 |
|
- |
| 5 Table 1(ii (b) Width W) |
- |
15000 |
|
- |
| 5 Table 1(ii (a) Height, H) |
- |
15000 |
|
- |
| 5 Table 1(ii) Overall dimension of vault door) |
- |
15000 |
|
- |
| 5 Table 1(i) Door Type) |
- |
15000 |
|
- |
| 4(Type) |
- |
15000 |
|
- |
| 5(Table-1)(Type of Door) |
- |
15000 |
|
- |
| 5(Table-1)(Overall dimesion of door) |
- |
15000 |
|
- |
| 5(Table-1)(Inside dimension or clear opening of door) |
- |
15000 |
|
- |
| 5(Table-1)(Thickness of door frame angle-made of Plate,if bulit up to form a channel) |
- |
15000 |
|
- |
| 5(Table-1)(Thickness of door frame ,if fabricated or multibend) |
- |
15000 |
|
- |
| 5(Table-1)(Dimension of the rebate coming under share) |
- |
15000 |
|
- |
| 5(Table-1)(Thickness of grill gate angle/section) |
- |
15000 |
|
- |
| 5(Table-1)(Diameter of grill gate rod) |
- |
15000 |
|
- |
| 5(Table-1)(Pitch of grill gate rod) |
- |
15000 |
|
- |
| 5(Table-1)(Thickness of door slab,thickness over rebate) |
- |
15000 |
|
- |
| 5(Table-1)(Thickness of the door over lock) |
- |
15000 |
|
- |
| 5(Table-1)(Thickness of drill & oxyacetylene torch resis. layer(exclue MS plate) |
- |
15000 |
|
- |
| 5(Table-1)(Wall thickness) |
- |
15000 |
|
- |
| 5(Table-1)(Number of locks) |
- |
15000 |
|
- |
| 5(Table-1)(Number of shooting bolys on hinge side) |
- |
15000 |
|
- |
| 5(Table-1)(Number of shooting bolts on opposite) |
- |
15000 |
|
- |
| 5(Table-1)(Number of shooting bolts at top) |
- |
15000 |
|
- |
| 5(Table-1)(Number of shooting bolts at bottom) |
- |
15000 |
|
- |
| 5(Table-1)(Cross sectional area as per shooting bolt) |
- |
15000 |
|
- |
| 5(Table-1)(Depth engagement of shooting) |
- |
15000 |
|
- |
| 6(Materail) |
- |
15000 |
|
- |
| 7(Classification) |
- |
15000 |
|
- |
| 8 & 8.1.1(Ventilating Grill Gate (Inside)) |
- |
15000 |
|
- |
| 8.1.1.1(Locking device (unpickable dual control lock)) |
- |
15000 |
|
- |
| 8.1.2(Main Door- Outer & inner plate thickness) |
- |
15000 |
|
- |
| 8.1.2.1(Door(Finish &Gap of frame/edge with any place)) |
- |
15000 |
|
- |
| 8.2(Door frame (No.of barckets & Size for gripping)) |
- |
15000 |
|
- |
| 8.2.1(Rebate of the door frame) |
- |
15000 |
|
- |
| 8.2.2(Compression mechanism) |
- |
15000 |
|
- |
| 8.2.3(Crane hinge mechanism) |
- |
15000 |
|
- |
| 8.3(Lock case) |
- |
15000 |
|
- |
| 8.3.2(Bolt work) |
- |
15000 |
|
- |
| 8.3.2.2(Construction (of bolt work)) |
- |
15000 |
|
- |
| 8.3.2.3(Bearing piller) |
- |
15000 |
|
- |
| 8.4.1(Shooting bolt control (By lock)) |
- |
15000 |
|
- |
| 8.4.2(Test of key-Lock) |
- |
15000 |
|
- |
| 8.4.3(Lock fixing bolts) |
- |
15000 |
|
- |
| 8.4.4(Time lock) |
- |
15000 |
|
- |
| 8.4.5(Automatic Relocking devise) |
- |
15000 |
|
- |
| 9 &9.1(Hinges) |
- |
15000 |
|
- |
| 9.1.1(Adjusting bolt) |
- |
15000 |
|
- |
| 9.2(Handles) |
- |
15000 |
|
- |
| 9.3(Foot bringe) |
- |
15000 |
|
- |
| 9.4(Vault lighting control) |
- |
15000 |
|
- |
| 10 &10.1(Dents,Burrs & Edges) |
- |
15000 |
|
- |
| 10.2(Colour coating thickness (Surafce paint)) |
- |
15000 |
|
- |
| 10.3(Cross Hatch test) |
- |
15000 |
|
- |
| 10.4(Door (Stainless cladding)) |
- |
15000 |
|
- |
| 11.1 &11.2(Test criteria for confomity -Burglaty attack) |
- |
15000 |
|
- |
| 11.1 &11.2(Test criteria for confomity -Fire resistancey) |
- |
15000 |
|
- |
| 12(Marking of door) |
- |
15000 |
|
- |
| 12.2(Marking on keys) |
- |
15000 |
|
- |
| 4(Type) |
- |
15000 |
|
- |
| 5(Table-1)(5(Table-1)) |
- |
15000 |
|
- |
| 5(Table-1)(Overall dimesion of door) |
- |
15000 |
|
- |
| 5(Table-1)(Inside dimension or clear opening of door) |
- |
15000 |
|
- |
| 5(Table-1)(Thickness of door frame angle-made of Plate,if bulit up to form a channel) |
- |
15000 |
|
- |
| 5(Table-1)(Thickness of door frame ,if fabricated or multibend) |
- |
15000 |
|
- |
| 5(Table-1)(Dimension of the rebate coming under share) |
- |
15000 |
|
- |
| 5(Table-1)(Thickness of grill gate angle/section) |
- |
15000 |
|
- |
| 5(Table-1)(Diameter of grill gate rod) |
- |
15000 |
|
- |
| 5(Table-1)(Pitch of grill gate rod) |
- |
15000 |
|
- |
| 5(Table-1)(Thickness of door slab,thickness over rebate) |
- |
15000 |
|
- |
| 5(Table-1)(Thickness of the door over lock) |
- |
15000 |
|
- |
| 5(Table-1)(Thickness of drill & oxyacetylene torch resis. layer(exclue MS plate) |
- |
15000 |
|
- |
| 5(Table-1)(Wall thickness) |
- |
15000 |
|
- |
| 5(Table-1)(Number of locks) |
- |
15000 |
|
- |
| 5(Table-1)(Number of shooting bolys on hinge side) |
- |
15000 |
|
- |
| 5(Table-1)(Number of shooting bolts at top) |
- |
15000 |
|
- |
| 5(Table-1)(Number of shooting bolts at bottom) |
- |
15000 |
|
- |
| 5(Table-1)(Cross sectional area as per shooting bolt) |
- |
15000 |
|
- |
| 5(Table-1)(Depth engagement of shooting) |
- |
15000 |
|
- |
| 6(Materail) |
- |
15000 |
|
- |
| 7(Classification) |
- |
15000 |
|
- |
| 8 & 8.1.1(Ventilating Grill Gate (Inside)) |
- |
15000 |
|
- |
| 8.1.1.1(Locking device (unpickable dual control lock)) |
- |
15000 |
|
- |
| 8.1.2(Main Door- Outer & inner plate thickness) |
- |
15000 |
|
- |
| 8.1.2.1(Door(Finish &Gap of frame/edge with any place)) |
- |
15000 |
|
- |
| 8.2(Door frame (No.of barckets & Size for gripping)) |
- |
15000 |
|
- |
| 8.2.1(Rebate of the door frame) |
- |
15000 |
|
- |
| 8.2.2(Compression mechanism) |
- |
15000 |
|
- |
| 8.2.3(Crane hinge mechanism) |
- |
15000 |
|
- |
| 8.3(Lock case) |
- |
15000 |
|
- |
| 8.3.2(Bolt work) |
- |
15000 |
|
- |
| 8.3.2.2(Construction (of bolt work)) |
- |
15000 |
|
- |
| 8.3.2.3(Bearing piller) |
- |
15000 |
|
- |
| 8.4.1(Shooting bolt control (By lock)) |
- |
15000 |
|
- |
| 8.4.2(Test of key-Lock) |
- |
15000 |
|
- |
| 8.4.3(Lock fixing bolts) |
- |
15000 |
|
- |
| 8.4.4(Time lock) |
- |
15000 |
|
- |
| 8.4.5(Automatic Relocking devise) |
- |
15000 |
|
- |
| 9 &9.1(Hinges) |
- |
15000 |
|
- |
| 9.1.1(Adjusting bolt) |
- |
15000 |
|
- |
| 9.3(Foot bringe) |
- |
15000 |
|
- |
| 9.4(Vault lighting control) |
- |
15000 |
|
- |
| 10 &10.1(Dents,Burrs & Edges) |
- |
15000 |
|
- |
| 10.2(Colour coating thickness (Surafce paint)) |
- |
15000 |
|
- |
| 10.3(Cross Hatch test) |
- |
15000 |
|
- |
| 10.4(Door (Stainless cladding)) |
- |
15000 |
|
- |
| 11.1 &11.2(Test criteria for confomity -Burglaty attack) |
- |
15000 |
|
- |
| 11.1 &11.2(Test criteria for confomity -Fire resistancey) |
- |
15000 |
|
- |
| 12(Marking of door) |
- |
5000 |
|
- |
| 12.2(Marking on keys) |
- |
5000 |
|
- |
| 11.1 (3)(Fire and stream hose IS 11188 (Part 3)) |
- |
15000 |
|
- |
| 11.1 (2)(Fire endurance IS 11188 (Part 3)) |
- |
150000 |
|
- |
| 11.1 (1)(Burglary resistance IS 11188 (Part 2)) |
- |
150000 |
|
- |
| 10.4(Alternate to Cl 10.4) |
- |
15000 |
|
- |
| 10.3(Cross Hatch Test) |
- |
15000 |
|
- |
| 10(FINISH) |
- |
15000 |
|
- |
| 9.4(Vault Lighting Control) |
- |
15000 |
|
- |
| 9.3(Foot Bridge) |
- |
15000 |
|
- |
| 9.2(Handles) |
- |
15000 |
|
- |
| 9.1.1(Adjusting Bolt) |
- |
15000 |
|
- |
| 9.1(Hinges) |
- |
15000 |
|
- |
| 9(DOOR FITTINGS) |
- |
15000 |
|
- |
| 8.4.5(Automatic Relocking Device) |
- |
15000 |
|
- |
| 8.4.4(Time Lock) |
- |
15000 |
|
- |
| 8.4(Lock) |
- |
15000 |
|
- |
| 8.3.2.2(Construction) |
- |
15000 |
|
- |
| 8.3.2.1(The number of bolts and their minimum dimension) |
- |
15000 |
|
- |
| 8.3.2(Bolt Work) |
- |
15000 |
|
- |
| 8.3.1(Lock Case) |
- |
15000 |
|
- |
| 8.3(Locking Mechanism) |
- |
15000 |
|
- |
| 8.2.3(Crane Hinge Mechanism) |
- |
15000 |
|
- |
| 8.2.2(Compression Mechanism) |
- |
15000 |
|
- |
| 8.2.1(Rebate of the Door Frame) |
- |
15000 |
|
- |
| 8.2(Doors Frame) |
- |
15000 |
|
- |
| 8.1.2(Main Door (Outside)) |
- |
15000 |
|
- |
| 8.1.1(Ventilating Grill Gate (Inside)) |
- |
15000 |
|
- |
| 8.1 Fig. 1(Doors) |
- |
15000 |
|
- |
| 8(CONSTRUCTION AND GENERALREQUIREMENTS) |
- |
15000 |
|
- |
| 5 Table 1(bolts, Min) |
- |
15000 |
|
- |
| 5 Table 1(xix) Depth of engagement of shooting) |
- |
15000 |
|
- |
| 5 Table 1(cross sectional area, Min,sq mm) |
- |
15000 |
|
- |
| 5 Table 1(xviii) Diameter of shooting bolts, Min) |
- |
15000 |
|
- |
| 5 Table 1(xvi) Number of shooting bolts at top,Min) |
- |
15000 |
|
- |
| 5 Table 1(xv) Number of shooting bolts on opposite side,Min) |
- |
15000 |
|
- |
| 5 Table 1(xiv) Number of shooting bolts on hinge side, Min) |
- |
15000 |
|
- |
| 5 Table 1(xiii) Number of locks) |
- |
15000 |
|
- |
| 5 Table 1(xii) Wall thickness (recommendation)) |
- |
15000 |
|
- |
| 5 Table 1(xi) Thickness of drill and oxyacetylene
torch resisting layer (excluding mild steel plates),Min) |
- |
15000 |
|
- |
| 5 Table 1(ix) Thickness of doors slab, thickness over rebate) |
- |
15000 |
|
- |
| 5 Table 1(viii) Pitch of grill gate rods) |
- |
15000 |
|
- |
| 5 Table 1(vii) Diameter of grill gate rods, Min) |
- |
15000 |
|
- |
| 5 Table 1(vi) Thickens of grill gate angles or
section made out of M.S. plates, Min) |
- |
15000 |
|
- |
| 5 Table 1(v) Dimension of the rebate coming under shear) |
- |
15000 |
|
- |
| 5 Table 1(iv (b) Thickness of door frame, if
fabricated from single plate to form
channel/multi-bend section, Min) |
- |
15000 |
|
- |
| 5 Table 1(ii (a) Height H, Min b) Width W, Min
iv(a) Thickness of door frame angle,
channel or section made out of M.S.
plates, if built up to form a channel,Min) |
- |
15000 |
|
- |
| 5 Table 1(iii) Inside dimension or clear opening when
door shutters are swung open at 180 degree) |
- |
15000 |
|
- |
| 5 Table 1(ii (b) Width W) |
- |
15000 |
|
- |
| 5 Table 1(ii (a) Height, H) |
- |
15000 |
|
- |
| 5 Table 1(ii) Overall dimension of vault door) |
- |
15000 |
|
- |
| 5 Table 1(i) Door Type) |
- |
15000 |
|
- |
| 4(Type) |
- |
15000 |
|
- |
| 5(Table-1)(Type of Door) |
- |
15000 |
|
- |
| 5(Table-1)(Overall dimesion of door) |
- |
15000 |
|
- |
| 5(Table-1)(Inside dimension or clear opening of door) |
- |
15000 |
|
- |
| 5(Table-1)(Thickness of door frame angle-made of Plate,if bulit up to form a channel) |
- |
15000 |
|
- |
| 5(Table-1)(Thickness of door frame ,if fabricated or multibend) |
- |
15000 |
|
- |
| 5(Table-1)(Dimension of the rebate coming under share) |
- |
15000 |
|
- |
| 5(Table-1)(Thickness of grill gate angle/section) |
- |
15000 |
|
- |
| 5(Table-1)(Diameter of grill gate rod) |
- |
15000 |
|
- |
| 5(Table-1)(Pitch of grill gate rod) |
- |
15000 |
|
- |
| 5(Table-1)(Thickness of door slab,thickness over rebate) |
- |
15000 |
|
- |
| 5(Table-1)(Thickness of the door over lock) |
- |
15000 |
|
- |
| 5(Table-1)(Thickness of drill & oxyacetylene torch resis. layer(exclue MS plate) |
- |
15000 |
|
- |
| 5(Table-1)(Wall thickness) |
- |
15000 |
|
- |
| 5(Table-1)(Number of locks) |
- |
15000 |
|
- |
| 5(Table-1)(Number of shooting bolys on hinge side) |
- |
15000 |
|
- |
| 5(Table-1)(Number of shooting bolts on opposite) |
- |
15000 |
|
- |
| 5(Table-1)(Number of shooting bolts at top) |
- |
15000 |
|
- |
| 5(Table-1)(Number of shooting bolts at bottom) |
- |
15000 |
|
- |
| 5(Table-1)(Cross sectional area as per shooting bolt) |
- |
15000 |
|
- |
| 5(Table-1)(Depth engagement of shooting) |
- |
15000 |
|
- |
| 6(Materail) |
- |
15000 |
|
- |
| 7(Classification) |
- |
15000 |
|
- |
| 8 & 8.1.1(Ventilating Grill Gate (Inside)) |
- |
15000 |
|
- |
| 8.1.1.1(Locking device (unpickable dual control lock)) |
- |
15000 |
|
- |
| 8.1.2(Main Door- Outer & inner plate thickness) |
- |
15000 |
|
- |
| 8.1.2.1(Door(Finish &Gap of frame/edge with any place)) |
- |
15000 |
|
- |
| 8.2(Door frame (No.of barckets & Size for gripping)) |
- |
15000 |
|
- |
| 8.2.1(Rebate of the door frame) |
- |
15000 |
|
- |
| 8.2.2(Compression mechanism) |
- |
15000 |
|
- |
| 8.2.3(Crane hinge mechanism) |
- |
15000 |
|
- |
| 8.3(Lock case) |
- |
15000 |
|
- |
| 8.3.2(Bolt work) |
- |
15000 |
|
- |
| 8.3.2.2(Construction (of bolt work)) |
- |
15000 |
|
- |
| 8.3.2.3(Bearing piller) |
- |
15000 |
|
- |
| 8.4.1(Shooting bolt control (By lock)) |
- |
15000 |
|
- |
| 8.4.2(Test of key-Lock) |
- |
15000 |
|
- |
| 8.4.3(Lock fixing bolts) |
- |
15000 |
|
- |
| 8.4.4(Time lock) |
- |
15000 |
|
- |
| 8.4.5(Automatic Relocking devise) |
- |
15000 |
|
- |
| 9 &9.1(Hinges) |
- |
15000 |
|
- |
| 9.1.1(Adjusting bolt) |
- |
15000 |
|
- |
| 9.2(Handles) |
- |
15000 |
|
- |
| 9.3(Foot bringe) |
- |
15000 |
|
- |
| 9.4(Vault lighting control) |
- |
15000 |
|
- |
| 10 &10.1(Dents,Burrs & Edges) |
- |
15000 |
|
- |
| 10.2(Colour coating thickness (Surafce paint)) |
- |
15000 |
|
- |
| 10.3(Cross Hatch test) |
- |
15000 |
|
- |
| 10.4(Door (Stainless cladding)) |
- |
15000 |
|
- |
| 11.1 &11.2(Test criteria for confomity -Burglaty attack) |
- |
15000 |
|
- |
| 11.1 &11.2(Test criteria for confomity -Fire resistancey) |
- |
15000 |
|
- |
| 12(Marking of door) |
- |
15000 |
|
- |
| 12.2(Marking on keys) |
- |
15000 |
|
- |
| 4(Type) |
- |
15000 |
|
- |
| 5(Table-1)(5(Table-1)) |
- |
15000 |
|
- |
| 5(Table-1)(Overall dimesion of door) |
- |
15000 |
|
- |
| 5(Table-1)(Inside dimension or clear opening of door) |
- |
15000 |
|
- |
| 5(Table-1)(Thickness of door frame angle-made of Plate,if bulit up to form a channel) |
- |
15000 |
|
- |
| 5(Table-1)(Thickness of door frame ,if fabricated or multibend) |
- |
15000 |
|
- |
| 5(Table-1)(Dimension of the rebate coming under share) |
- |
15000 |
|
- |
| 5(Table-1)(Thickness of grill gate angle/section) |
- |
15000 |
|
- |
| 5(Table-1)(Diameter of grill gate rod) |
- |
15000 |
|
- |
| 5(Table-1)(Pitch of grill gate rod) |
- |
15000 |
|
- |
| 5(Table-1)(Thickness of door slab,thickness over rebate) |
- |
15000 |
|
- |
| 5(Table-1)(Thickness of the door over lock) |
- |
15000 |
|
- |
| 5(Table-1)(Thickness of drill & oxyacetylene torch resis. layer(exclue MS plate) |
- |
15000 |
|
- |
| 5(Table-1)(Wall thickness) |
- |
15000 |
|
- |
| 5(Table-1)(Number of locks) |
- |
15000 |
|
- |
| 5(Table-1)(Number of shooting bolys on hinge side) |
- |
15000 |
|
- |
| 5(Table-1)(Number of shooting bolts at top) |
- |
15000 |
|
- |
| 5(Table-1)(Number of shooting bolts at bottom) |
- |
15000 |
|
- |
| 5(Table-1)(Cross sectional area as per shooting bolt) |
- |
15000 |
|
- |
| 5(Table-1)(Depth engagement of shooting) |
- |
15000 |
|
- |
| 6(Materail) |
- |
15000 |
|
- |
| 7(Classification) |
- |
15000 |
|
- |
| 8 & 8.1.1(Ventilating Grill Gate (Inside)) |
- |
15000 |
|
- |
| 8.1.1.1(Locking device (unpickable dual control lock)) |
- |
15000 |
|
- |
| 8.1.2(Main Door- Outer & inner plate thickness) |
- |
15000 |
|
- |
| 8.1.2.1(Door(Finish &Gap of frame/edge with any place)) |
- |
15000 |
|
- |
| 8.2(Door frame (No.of barckets & Size for gripping)) |
- |
15000 |
|
- |
| 8.2.1(Rebate of the door frame) |
- |
15000 |
|
- |
| 8.2.2(Compression mechanism) |
- |
15000 |
|
- |
| 8.2.3(Crane hinge mechanism) |
- |
15000 |
|
- |
| 8.3(Lock case) |
- |
15000 |
|
- |
| 8.3.2(Bolt work) |
- |
15000 |
|
- |
| 8.3.2.2(Construction (of bolt work)) |
- |
15000 |
|
- |
| 8.3.2.3(Bearing piller) |
- |
15000 |
|
- |
| 8.4.1(Shooting bolt control (By lock)) |
- |
15000 |
|
- |
| 8.4.2(Test of key-Lock) |
- |
15000 |
|
- |
| 8.4.3(Lock fixing bolts) |
- |
15000 |
|
- |
| 8.4.4(Time lock) |
- |
15000 |
|
- |
| 8.4.5(Automatic Relocking devise) |
- |
15000 |
|
- |
| 9 &9.1(Hinges) |
- |
15000 |
|
- |
| 9.1.1(Adjusting bolt) |
- |
15000 |
|
- |
| 9.3(Foot bringe) |
- |
15000 |
|
- |
| 9.4(Vault lighting control) |
- |
15000 |
|
- |
| 10 &10.1(Dents,Burrs & Edges) |
- |
15000 |
|
- |
| 10.2(Colour coating thickness (Surafce paint)) |
- |
15000 |
|
- |
| 10.3(Cross Hatch test) |
- |
15000 |
|
- |
| 10.4(Door (Stainless cladding)) |
- |
15000 |
|
- |
| 11.1 &11.2(Test criteria for confomity -Burglaty attack) |
- |
15000 |
|
- |
| 11.1 &11.2(Test criteria for confomity -Fire resistancey) |
- |
15000 |
|
- |
| 12(Marking of door) |
- |
15000 |
|
- |
| 12.2(Marking on keys) |
- |
15000 |
|
- |
|
14 Nov, 2027 |
-
Included w.e.f. 28.03.2025 |
| 6057 |
Atmy Analytical Labs Private Limited (Unit-2), Greater Noida
| 8176106
| IS 11188 : Part 1 (2021) |
Vault Strong Room doors Part 1 specification |
ALL |
349000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 11.1 (3)(Fire and stream hose IS 11188 (Part 3)) |
- |
349000 |
|
- |
| 11.1 (2)(Fire endurance IS 11188 (Part 3)) |
- |
349000 |
|
- |
| 11.1 (1)(Burglary resistance IS 11188 (Part 2)) |
- |
349000 |
|
- |
| 10.4(Alternate to Cl 10.4) |
- |
349000 |
|
- |
| 10.3(Cross Hatch Test) |
- |
349000 |
|
- |
| 10(FINISH) |
- |
349000 |
|
- |
| 9.4(Vault Lighting Control) |
- |
349000 |
|
- |
| 9.3(Foot Bridge) |
- |
349000 |
|
- |
| 9.2(Handles) |
- |
349000 |
|
- |
| 9.1.1(Adjusting Bolt) |
- |
349000 |
|
- |
| 9.1(Hinges) |
- |
349000 |
|
- |
| 9(DOOR FITTINGS) |
- |
349000 |
|
- |
| 8.4.5(Automatic Relocking Device) |
- |
349000 |
|
- |
| 8.4.4(Time Lock) |
- |
349000 |
|
- |
| 8.4(Lock) |
- |
349000 |
|
- |
| 8.3.2.2(Construction) |
- |
349000 |
|
- |
| 8.3.2.1(The number of bolts and their minimum dimension) |
- |
349000 |
|
- |
| 8.3.2(Bolt Work) |
- |
349000 |
|
- |
| 8.3.1(Lock Case) |
- |
349000 |
|
- |
| 8.3(Locking Mechanism) |
- |
349000 |
|
- |
| 8.2.3(Crane Hinge Mechanism) |
- |
349000 |
|
- |
| 8.2.2(Compression Mechanism) |
- |
349000 |
|
- |
| 8.2.1(Rebate of the Door Frame) |
- |
349000 |
|
- |
| 8.2(Doors Frame) |
- |
349000 |
|
- |
| 8.1.2(Main Door (Outside)) |
- |
349000 |
|
- |
| 8.1.1(Ventilating Grill Gate (Inside)) |
- |
349000 |
|
- |
| 8.1 Fig. 1(Doors) |
- |
349000 |
|
- |
| 8(CONSTRUCTION AND GENERALREQUIREMENTS) |
- |
349000 |
|
- |
| 5 Table 1(bolts, Min) |
- |
349000 |
|
- |
| 5 Table 1(xix) Depth of engagement of shooting) |
- |
349000 |
|
- |
| 5 Table 1(cross sectional area, Min,sq mm) |
- |
349000 |
|
- |
| 5 Table 1(xviii) Diameter of shooting bolts, Min) |
- |
349000 |
|
- |
| 5 Table 1(xvi) Number of shooting bolts at top,Min) |
- |
349000 |
|
- |
| 5 Table 1(xv) Number of shooting bolts on opposite side,Min) |
- |
349000 |
|
- |
| 5 Table 1(xiv) Number of shooting bolts on hinge side, Min) |
- |
349000 |
|
- |
| 5 Table 1(xiii) Number of locks) |
- |
349000 |
|
- |
| 5 Table 1(xii) Wall thickness (recommendation)) |
- |
349000 |
|
- |
| 5 Table 1(xi) Thickness of drill and oxyacetylene
torch resisting layer (excluding mild steel plates),Min) |
- |
349000 |
|
- |
| 5 Table 1(ix) Thickness of doors slab, thickness over rebate) |
- |
349000 |
|
- |
| 5 Table 1(viii) Pitch of grill gate rods) |
- |
349000 |
|
- |
| 5 Table 1(vii) Diameter of grill gate rods, Min) |
- |
349000 |
|
- |
| 5 Table 1(vi) Thickens of grill gate angles or
section made out of M.S. plates, Min) |
- |
349000 |
|
- |
| 5 Table 1(v) Dimension of the rebate coming under shear) |
- |
349000 |
|
- |
| 5 Table 1(iv (b) Thickness of door frame, if
fabricated from single plate to form
channel/multi-bend section, Min) |
- |
349000 |
|
- |
| 5 Table 1(ii (a) Height H, Min b) Width W, Min
iv(a) Thickness of door frame angle,
channel or section made out of M.S.
plates, if built up to form a channel,Min) |
- |
349000 |
|
- |
| 5 Table 1(iii) Inside dimension or clear opening when
door shutters are swung open at 180 degree) |
- |
349000 |
|
- |
| 5 Table 1(ii (b) Width W) |
- |
349000 |
|
- |
| 5 Table 1(ii (a) Height, H) |
- |
349000 |
|
- |
| 5 Table 1(ii) Overall dimension of vault door) |
- |
349000 |
|
- |
| 5 Table 1(i) Door Type) |
- |
349000 |
|
- |
| 4(Type) |
- |
349000 |
|
- |
| 5(Table-1)(Type of Door) |
- |
349000 |
|
- |
| 5(Table-1)(Overall dimesion of door) |
- |
349000 |
|
- |
| 5(Table-1)(Inside dimension or clear opening of door) |
- |
349000 |
|
- |
| 5(Table-1)(Thickness of door frame angle-made of Plate,if bulit up to form a channel) |
- |
349000 |
|
- |
| 5(Table-1)(Thickness of door frame ,if fabricated or multibend) |
- |
349000 |
|
- |
| 5(Table-1)(Dimension of the rebate coming under share) |
- |
349000 |
|
- |
| 5(Table-1)(Thickness of grill gate angle/section) |
- |
349000 |
|
- |
| 5(Table-1)(Diameter of grill gate rod) |
- |
349000 |
|
- |
| 5(Table-1)(Pitch of grill gate rod) |
- |
349000 |
|
- |
| 5(Table-1)(Thickness of door slab,thickness over rebate) |
- |
349000 |
|
- |
| 5(Table-1)(Thickness of the door over lock) |
- |
349000 |
|
- |
| 5(Table-1)(Thickness of drill & oxyacetylene torch resis. layer(exclue MS plate) |
- |
349000 |
|
- |
| 5(Table-1)(Wall thickness) |
- |
349000 |
|
- |
| 5(Table-1)(Number of locks) |
- |
349000 |
|
- |
| 5(Table-1)(Number of shooting bolys on hinge side) |
- |
349000 |
|
- |
| 5(Table-1)(Number of shooting bolts on opposite) |
- |
349000 |
|
- |
| 5(Table-1)(Number of shooting bolts at top) |
- |
349000 |
|
- |
| 5(Table-1)(Number of shooting bolts at bottom) |
- |
349000 |
|
- |
| 5(Table-1)(Cross sectional area as per shooting bolt) |
- |
349000 |
|
- |
| 5(Table-1)(Depth engagement of shooting) |
- |
349000 |
|
- |
| 6(Materail) |
- |
349000 |
|
- |
| 7(Classification) |
- |
349000 |
|
- |
| 8 & 8.1.1(Ventilating Grill Gate (Inside)) |
- |
349000 |
|
- |
| 8.1.1.1(Locking device (unpickable dual control lock)) |
- |
349000 |
|
- |
| 8.1.2(Main Door- Outer & inner plate thickness) |
- |
349000 |
|
- |
| 8.1.2.1(Door(Finish &Gap of frame/edge with any place)) |
- |
349000 |
|
- |
| 8.2(Door frame (No.of barckets & Size for gripping)) |
- |
349000 |
|
- |
| 8.2.1(Rebate of the door frame) |
- |
349000 |
|
- |
| 8.2.2(Compression mechanism) |
- |
349000 |
|
- |
| 8.2.3(Crane hinge mechanism) |
- |
349000 |
|
- |
| 8.3(Lock case) |
- |
349000 |
|
- |
| 8.3.2(Bolt work) |
- |
349000 |
|
- |
| 8.3.2.2(Construction (of bolt work)) |
- |
349000 |
|
- |
| 8.3.2.3(Bearing piller) |
- |
349000 |
|
- |
| 8.4.1(Shooting bolt control (By lock)) |
- |
349000 |
|
- |
| 8.4.2(Test of key-Lock) |
- |
349000 |
|
- |
| 8.4.3(Lock fixing bolts) |
- |
349000 |
|
- |
| 8.4.4(Time lock) |
- |
349000 |
|
- |
| 8.4.5(Automatic Relocking devise) |
- |
349000 |
|
- |
| 9 &9.1(Hinges) |
- |
349000 |
|
- |
| 9.1.1(Adjusting bolt) |
- |
349000 |
|
- |
| 9.2(Handles) |
- |
349000 |
|
- |
| 9.3(Foot bringe) |
- |
349000 |
|
- |
| 9.4(Vault lighting control) |
- |
349000 |
|
- |
| 10 &10.1(Dents,Burrs & Edges) |
- |
349000 |
|
- |
| 10.2(Colour coating thickness (Surafce paint)) |
- |
349000 |
|
- |
| 10.3(Cross Hatch test) |
- |
349000 |
|
- |
| 10.4(Door (Stainless cladding)) |
- |
349000 |
|
- |
| 11.1 &11.2(Test criteria for confomity -Burglaty attack) |
- |
349000 |
|
- |
| 11.1 &11.2(Test criteria for confomity -Fire resistancey) |
- |
349000 |
|
- |
| 12(Marking of door) |
- |
349000 |
|
- |
| 12.2(Marking on keys) |
- |
349000 |
|
- |
| 4(Type) |
- |
349000 |
|
- |
| 5(Table-1)(5(Table-1)) |
- |
349000 |
|
- |
| 5(Table-1)(Overall dimesion of door) |
- |
349000 |
|
- |
| 5(Table-1)(Inside dimension or clear opening of door) |
- |
349000 |
|
- |
| 5(Table-1)(Thickness of door frame angle-made of Plate,if bulit up to form a channel) |
- |
349000 |
|
- |
| 5(Table-1)(Thickness of door frame ,if fabricated or multibend) |
- |
349000 |
|
- |
| 5(Table-1)(Dimension of the rebate coming under share) |
- |
349000 |
|
- |
| 5(Table-1)(Thickness of grill gate angle/section) |
- |
349000 |
|
- |
| 5(Table-1)(Diameter of grill gate rod) |
- |
349000 |
|
- |
| 5(Table-1)(Pitch of grill gate rod) |
- |
349000 |
|
- |
| 5(Table-1)(Thickness of door slab,thickness over rebate) |
- |
349000 |
|
- |
| 5(Table-1)(Thickness of the door over lock) |
- |
349000 |
|
- |
| 5(Table-1)(Thickness of drill & oxyacetylene torch resis. layer(exclue MS plate) |
- |
349000 |
|
- |
| 5(Table-1)(Wall thickness) |
- |
349000 |
|
- |
| 5(Table-1)(Number of locks) |
- |
349000 |
|
- |
| 5(Table-1)(Number of shooting bolys on hinge side) |
- |
349000 |
|
- |
| 5(Table-1)(Number of shooting bolts at top) |
- |
349000 |
|
- |
| 5(Table-1)(Number of shooting bolts at bottom) |
- |
349000 |
|
- |
| 5(Table-1)(Cross sectional area as per shooting bolt) |
- |
349000 |
|
- |
| 5(Table-1)(Depth engagement of shooting) |
- |
349000 |
|
- |
| 6(Materail) |
- |
349000 |
|
- |
| 7(Classification) |
- |
349000 |
|
- |
| 8 & 8.1.1(Ventilating Grill Gate (Inside)) |
- |
349000 |
|
- |
| 8.1.1.1(Locking device (unpickable dual control lock)) |
- |
349000 |
|
- |
| 8.1.2(Main Door- Outer & inner plate thickness) |
- |
349000 |
|
- |
| 8.1.2.1(Door(Finish &Gap of frame/edge with any place)) |
- |
349000 |
|
- |
| 8.2(Door frame (No.of barckets & Size for gripping)) |
- |
349000 |
|
- |
| 8.2.1(Rebate of the door frame) |
- |
349000 |
|
- |
| 8.2.2(Compression mechanism) |
- |
349000 |
|
- |
| 8.2.3(Crane hinge mechanism) |
- |
349000 |
|
- |
| 8.3(Lock case) |
- |
349000 |
|
- |
| 8.3.2(Bolt work) |
- |
349000 |
|
- |
| 8.3.2.2(Construction (of bolt work)) |
- |
349000 |
|
- |
| 8.3.2.3(Bearing piller) |
- |
349000 |
|
- |
| 8.4.1(Shooting bolt control (By lock)) |
- |
349000 |
|
- |
| 8.4.2(Test of key-Lock) |
- |
349000 |
|
- |
| 8.4.3(Lock fixing bolts) |
- |
349000 |
|
- |
| 8.4.4(Time lock) |
- |
349000 |
|
- |
| 8.4.5(Automatic Relocking devise) |
- |
349000 |
|
- |
| 9 &9.1(Hinges) |
- |
349000 |
|
- |
| 9.1.1(Adjusting bolt) |
- |
349000 |
|
- |
| 9.3(Foot bringe) |
- |
349000 |
|
- |
| 9.4(Vault lighting control) |
- |
349000 |
|
- |
| 10 &10.1(Dents,Burrs & Edges) |
- |
349000 |
|
- |
| 10.2(Colour coating thickness (Surafce paint)) |
- |
349000 |
|
- |
| 10.3(Cross Hatch test) |
- |
349000 |
|
- |
| 10.4(Door (Stainless cladding)) |
- |
349000 |
|
- |
| 11.1 &11.2(Test criteria for confomity -Burglaty attack) |
- |
349000 |
|
- |
| 11.1 &11.2(Test criteria for confomity -Fire resistancey) |
- |
349000 |
|
- |
| 12(Marking of door) |
- |
349000 |
|
- |
| 12.2(Marking on keys) |
- |
349000 |
|
- |
|
08 Feb, 2027 |
-
Included w.e.f. 01.04.2025 |
| 6058 |
Atmy Analytical Labs Private Limited (Unit-2), Greater Noida
| 8176106
| IS 5244 (2020) |
Safe Deposit Locker Cabinets — Specification ( Fourth Revision ) |
- |
39500 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl. 4.1( Types ) |
- |
0 |
|
- |
| Cl. 6 (Fig-5)(Cabinet Size (in mm)) |
- |
0 |
|
- |
| Table 1(Thickness Min. (in mm)) |
- |
0 |
|
- |
| Table 1(Thickness Min. (in mm)) |
- |
0 |
|
- |
| Table 1(Thickness Min. (in mm)) |
- |
0 |
|
- |
| Table 1(Thickness Min. (in mm)) |
- |
0 |
|
- |
| Table 1(Thickness Min. (in mm)) |
- |
0 |
|
- |
| Table 1(Thickness Min. (in mm)) |
- |
0 |
|
- |
| Table 1(Thickness Min. (in mm)) |
- |
0 |
|
- |
| Table 1(Thickness Min. (in mm)) |
- |
0 |
|
- |
| Table 1(Thickness Min. (in mm)) |
- |
0 |
|
- |
| Table 1(Thickness Min. (in mm)) |
- |
0 |
|
- |
| Table 1(Finish) |
- |
0 |
|
- |
| Table 1(Finish) |
- |
0 |
|
- |
| Cl.6(Sizes (Minimum Inside Measurements of locker) Locker Size) |
- |
0 |
|
- |
| Cl.6(Sizes (Minimum Inside Measurements of locker) Locker Size) |
- |
0 |
|
- |
| Cl.6(Sizes (Minimum Inside Measurements of locker) Locker Size) |
- |
0 |
|
- |
| Cl. 7.1(Design and Manufacture) |
- |
0 |
|
- |
| Cl. 7.1(Design and Manufacture) |
- |
0 |
|
- |
| Cl. 7.1(Design and Manufacture) |
- |
0 |
|
- |
| Cl. 7.1(Design and Manufacture) |
- |
0 |
|
- |
| Cl. 7.1(Design and Manufacture) |
- |
0 |
|
- |
| Cl. 7.2(Design and Manufacture) |
- |
0 |
|
- |
| Cl. 7.3(Design and Manufacture) |
- |
0 |
|
- |
| Cl. 7.3(Design and Manufacture) |
- |
0 |
|
- |
| Cl. 7.4(Design and Manufacture) |
- |
0 |
|
- |
| Cl. 7.5(Design and Manufacture) |
- |
0 |
|
- |
| Cl. 7.6(Design and Manufacture) |
- |
0 |
|
- |
| Cl. 8(Workmanship) |
- |
0 |
|
- |
| Cl. 8.2(Tolerance) |
- |
0 |
|
- |
| Cl. 9.1(Testing) |
- |
0 |
|
- |
| Cl. 9.2(Testing) |
- |
0 |
|
- |
| Cl. 9.3(Cross Hatch Test) |
- |
0 |
|
- |
| Cl. 10.1(Marking) |
- |
0 |
|
- |
| Cl. 10.2(Marking) |
- |
0 |
|
- |
| Cl. 10.3(Marking) |
- |
0 |
|
- |
| Cl. 10.4(Marking on Keys) |
- |
0 |
|
- |
| Cl. 11(Packing) |
- |
0 |
|
- |
|
08 Feb, 2027 |
-
Included w.e.f. 01.04.2025 |
| 6059 |
URS PRODUCTS AND TESTING PVT. LTD. (A29), NOIDA
| 8168906
| IS 2347 (2017) |
Domestic pressure cooker - Specification (Sixth Revision) |
- |
34000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4.1(Capacity) |
- |
400 |
|
- |
| 5.1.1(Body, Lid, Containers and Grid) |
- |
300 |
|
- |
| 5.1.2(Body, Lid, Containers and Grid) |
- |
300 |
|
- |
| 5.1.3(Body, Lid, Containers and Grid) |
- |
300 |
|
- |
| 5.1.4(Body, Lid, Containers and Grid) |
- |
300 |
|
- |
| 5.2(Safety Relief Device) |
- |
300 |
|
- |
| 5.3(Gasket) |
- |
300 |
|
- |
| 5.4(Handles and Knobs) |
- |
300 |
|
- |
| 5.5(Pressure Regulating Device) |
- |
300 |
|
- |
| 5.6(Vent Seal Pin for Pressure Regulating Device) |
- |
300 |
|
- |
| 5.7(Vent Pipe) |
- |
300 |
|
- |
| 5.8(Vent Pipe Nut) |
- |
300 |
|
- |
| 5.9(Spring) |
- |
300 |
|
- |
| 6(CONSTRUCTION) |
- |
300 |
|
- |
| 6.1(Pressure Regulating Device) |
- |
300 |
|
- |
| 6.1.1(Pressure Regulating Device) |
- |
300 |
|
- |
| 6.1.2(Pressure Regulating Device) |
- |
300 |
|
- |
| 6.1.3(Pressure Regulating Device) |
- |
300 |
|
- |
| 6.1.4(Pressure Regulating Device) |
- |
300 |
|
- |
| 6.1.5(Pressure Regulating Device) |
- |
300 |
|
- |
| 6.2(Safety Relief Device) |
- |
300 |
|
- |
| 6.2.1(Safety Relief Device) |
- |
300 |
|
- |
| 6.2.2(Safety Relief Device) |
- |
300 |
|
- |
| 6.3.1(Temperature Responsive Pressure Relief Device) |
- |
400 |
|
- |
| 6.3.1(Temperature Responsive Pressure Relief Device) |
- |
4000 |
|
- |
| 6.4.1(Handles and Knobs) |
- |
300 |
|
- |
| 6.4.1.1(Handles and Knobs) |
- |
300 |
|
- |
| 7.1(WORKMANSHIP AND FINISH) |
- |
300 |
|
- |
| 7.2(WORKMANSHIP AND FINISH) |
- |
300 |
|
- |
| 7.3(WORKMANSHIP AND FINISH) |
- |
500 |
|
- |
| 7.4(WORKMANSHIP AND FINISH) |
- |
1000 |
|
- |
| 8.1(Air Pressure Test) |
- |
600 |
|
- |
| 8.2(Proof Pressure Test) |
- |
600 |
|
- |
| 8.3(Operating Test for Pressure Regulating Device) |
- |
800 |
|
- |
| 8.4(Test for Safety Pressure Relief Device) |
- |
800 |
|
- |
| 8.5(Bursting Pressure Test) |
- |
1000 |
|
- |
| 8.6.1(Tests for Removal of Lid under Pressure For Outer Lid Cooker) |
- |
900 |
|
- |
| 8.6.2(Tests for Removal of Lid under Pressure For inner Lid Cooker) |
- |
900 |
|
- |
| 8.7(Test for Spring Loaded Mechanism) |
- |
800 |
|
- |
| 8.8(Test for Spring Loaded Mechanism) |
- |
1200 |
|
- |
| 8.9(Test for Spring Loaded Mechanism) |
- |
1200 |
|
- |
| 8.1(testing of handles of the cooker) |
- |
1200 |
|
- |
| 8.4 Annex H-1.2(Test for SPRD - For Resettable Devices ) |
- |
800 |
|
- |
| 8.4 Annex H-1.1(Test for SPRD - For Destructible Devices ) |
- |
800 |
|
- |
| 8.10 (a)(Handles of the cooker- Resistance to Burning) |
- |
700 |
|
- |
| 8.10 (b)(Handles of the cooker- Heat Resistance) |
- |
700 |
|
- |
| 8.10 (c)(Handles of the cooker- Torque Strength) |
- |
700 |
|
- |
| 8.10 (d)(Handles of the cooker- Bending Strength) |
- |
700 |
|
- |
| 8.10 (e)(Handles of the cooker- Fatigue Resistance) |
- |
1200 |
|
- |
| 8.10 (f)(Handles of the cooker- Thermal Insualtion Test) |
- |
800 |
|
- |
| 8.10 NOTES (3)(Handles of the cooker - Proof Pressure) |
- |
300 |
|
- |
| 8.10 NOTES (4)(Handles of the cooker) |
- |
300 |
|
- |
| 8.10 NOTES (5)(Handles of the cooker) |
- |
300 |
|
- |
| 8.10 NOTES (6)(Handles of the cooker) |
- |
300 |
|
- |
| 8.11.1 (a)(External Coating (powder coating or ceramic coating or high temperature resistant liquid coating)) |
- |
800 |
|
- |
| 8.11.1 (b)(External Coating (powder coating or ceramic coating or high temperature resistant liquid coating)) |
- |
800 |
|
- |
| 8.11.1 (c)(External Coating (powder coating or ceramic coating or high temperature resistant liquid coating)) |
- |
800 |
|
- |
| 8.11.1.1 (Thermal shock test for externally coated cooker) |
- |
1200 |
|
- |
| 8.12(Internal Coating) |
- |
1300 |
|
- |
| 8.14(3 Ply Construction Cooker Body) |
- |
1000 |
|
- |
| 11(Marking) |
- |
300 |
|
- |
|
- |
-
- |
| 6060 |
URS PRODUCTS AND TESTING PVT. LTD. (A29), NOIDA
| 8168906
| IS 14756 (2022) |
Draft Indian Standard STAINLESS STEEL COOKWARE SPECIFICATION Second Revision of IS 14756 |
- |
12000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 3.1(Material) |
- |
500 |
|
- |
| 3.2(Material) |
- |
500 |
|
- |
| 3.3(Material) |
- |
500 |
|
- |
| 3.4(Material) |
- |
500 |
|
- |
| 3.5(Material) |
- |
500 |
|
- |
| 4.1 (Annex A)(Shapes and Dimensions) |
- |
500 |
|
- |
| 4.2 (Table 1)(Shapes and Dimensions) |
- |
500 |
|
- |
| 4.3(Shapes and Dimensions) |
- |
500 |
|
- |
| 4.4(Shapes and Dimensions) |
- |
500 |
|
- |
| 6.1(Staining Test) |
- |
1000 |
|
- |
| 6.2(Mechanical Shock Test (For Cladded Utensils only)) |
- |
1000 |
|
- |
| 6.3(Thermal Shock Test (For Cladded Utensils only)) |
- |
1000 |
|
- |
| 6.4(Dry Heat Test (For Cladded Utensils only)) |
- |
1500 |
|
- |
| 6.5(Coating Thickness Test (For Copper Deposit)) |
- |
1000 |
|
- |
| 6.6(3 Ply) |
- |
1000 |
|
- |
| 6.7.1(Nominal Capacity Test) |
- |
1000 |
|
- |
| 6.8.1(Tests on Tempered Glass Lid) |
- |
1000 |
|
- |
| 6.8.2(Tests on Tempered Glass Lid (Ball drop test)) |
- |
1000 |
|
- |
| 6.8.3(Tests on Tempered Glass Lid (thermal shock test)) |
- |
1000 |
|
- |
| 6.8.4.1(Tests on Tempered Glass Lid (Free Fall Test with rim facing down)) |
- |
1000 |
|
- |
| 6.8.4.2(Tests on Tempered Glass Lid (Free Fall Test without rim facing down)) |
- |
1000 |
|
- |
| 3.4(Material) |
- |
500 |
|
- |
| 3.5(Material) |
- |
500 |
|
- |
| 3.5(Material) |
- |
500 |
|
- |
| 3.5(Material) |
- |
500 |
|
- |
| 4.2 (Table 1)(Shapes and Dimensions) |
- |
500 |
|
- |
| 4.2(Shapes and Dimensions) |
- |
500 |
|
- |
| 5.1(Workmanship and Finish) |
- |
500 |
|
- |
| 5.1(Workmanship and Finish) |
- |
500 |
|
- |
| 5.1(Workmanship and Finish) |
- |
500 |
|
- |
| 5.2(Workmanship and Finish) |
- |
500 |
|
- |
| 5.3(Workmanship and Finish) |
- |
500 |
|
- |
| 5.3(Workmanship and Finish) |
- |
500 |
|
- |
| 5.3(Workmanship and Finish) |
- |
500 |
|
- |
| 5.3(Workmanship and Finish) |
- |
500 |
|
- |
| 5.3(Workmanship and Finish) |
- |
500 |
|
- |
| 5.3(Workmanship and Finish) |
- |
500 |
|
- |
| 5.4(Workmanship and Finish) |
- |
500 |
|
- |
| 5.5(Workmanship and Finish) |
- |
500 |
|
- |
| 5.6(Workmanship and Finish) |
- |
500 |
|
- |
| 6.1(Staining Test) |
- |
1000 |
|
- |
| 6.7.2(Nominal Capacity Test- Diameter) |
- |
1000 |
|
- |
| 6.8.1(Tests on Tempered Glass Lid) |
- |
1000 |
|
- |
|
- |
-
- |
