BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

11374 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

8551

BIS, Eastern Regional Laboratory (ERL)

None

IS 4985 (2021)

UNPLASTICIZED PVC PIPES FOR POTABLE WATER SUPPLIES SPECIFICATION Fourth Revision

All sizes/varieties

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
10.7 (Sulphated Ash Content)	-
7.1.1.1 (DIMENSIONS-PIPE-Mean O.D. (Minimum))	-
7.1.1.2 (DIMENSIONS-PIPE-O.D. at any Point (Minimum))	-
7.1.2.1 (DIMENSIONS-PIPE-Thickness(Minimum))	-
7.1.2.1 (DIMENSIONS-PIPE-Thickness(Maximum))	-
7.1.2.1 (DIMENSIONS-PIPE-Average Thickness)	-
7.2.1.1-Table 3 (DIMENSIONS-Socket-Sockets for solvent cement jointing-Minimum Length)	-
10.1 (Colour)	-
10.1 (Surface Finish)	-
10.2 (PHYSICAL AND CHEMICAL CHARACTERISTICS-Opacity)	-
10.4 (PHYSICAL AND CHEMICAL CHARACTERISTICS- Reversion Test)	-
10.5 (PHYSICAL AND CHEMICAL CHARACTERISTICS- Vicat Softening Temperature)	-
10.6 (PHYSICAL AND CHEMICAL CHARACTERISTICS- Density)	-
11.2 (Resistance to External Blows at 0°C)	-
10.3 (Effect on Water Test)	-

-
-

8552

TUV Rheinland (India) Pvt. Ltd

6126126

IS 16169 (2014)

Utility - Interconnected photovoltaic inverters - Test procedure of islanding prevention measures

450000 View breakup
10% discount to BIS samples

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6 to 6.2, (Elec)(Test for single or multi-phase inverter to Pass/fail criteria)	-	450000		For inverter either clause 6 to 6.2 is applicable or Annex B. Therefore charges is provided for both the clauses.
Annex B(Test for independent islanding device)	-	450000		For inverter either clause 6 to 6.2 is applicable or Annex B. Therefore charges is provided for both the clauses.

17 Feb, 2028

-
-

8553

BIS, Central Laboratory (CL)

None

IS 711 (1970)

Specification for ferric choride, technical (First Revision)

- View breakup
Rs.3950/- for Anhydrous, Rs.4200/- for Hydrated, Rs.4400/- for liquid

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl.3.2, Table-1(i) (Relative density(For liquid))	-
Cl.3.2, Table-1(ii) (Ferric chloride (as FeCl3))	-
Cl.3.2, Table-1(iii) (Free acid (HCL))	-
Cl.3.2, Table-1(iiIb) (Basicity)	-
Cl.3.2, Table-1(iv) (Ferrous salts (as FeCl2))	-
Cl.3.2, Table-1(v) (Insoluble matter)	-
Cl.3.2, Table-1(vi) (Free chlorine (as Cl))	-
Cl.3.2, Table-1(vii) (Sulphates (as SO4))	-
Cl.3.2, Table-1(viii) (Nitrates (as NO3))	-
Cl.3.2, Table-1(ix) (Alkalis and alkaline earths (expressed as sulphates))	-
Cl.3.2, Table-1(x) (Copper (as Cu))	-
Cl.3.2, Table-1(xi) (Zinc (as Zn))	-
Cl.3.2, Table-1(xii) (Arsenic (as AsO3))	-

-
-

8554

Vijai Electricals Ltd., Transformer Testing Laboratory

9171026

IS 1180 : Part 1 (2014)

Outdoor Type Oil Immersed Distribution Transformers Upto and Including 2 500 kVA, 33kV - Specification Part 1 Mineral Oil Immersed (Fourth Revision)

Distribution Transformer upto 2500kVA & 33kV Class

120000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
21.2 a)(Measurement of winding resistance )	-	600	For 100kVA
21.2 b)( Measurement of voltage ratio and check of phase displacemen)	-	800	For 100kVA
21.2 c)( Measurement of short-circuit impedance (principal tapping, when applicable) and load loss at 50 percent and 100 percent load)	-	2500	For 100kVA
21.2 d)(Measurement of no-load loss and current)	-	1600	For 100kVA
21.2 e)(Measurement of insulation resistance)	-	500	For 100kVA
21.2 f)(Induced over-voltage withstand test)	-	1000	For 100kVA
21.2 g)( Separate-source voltage withstand test)	-	1000	For 100kVA
21.5.3.3(Oil leakage test)	-	4500	For 100kVA
21.3(a )(Lightning impulse test)	-	25000	For 100kVA
21.3(b)(Temperature-rise test)	-	12000	For 100kVA
21.3(c)(Short-circuit withstand test)	-	43000	For 100kVA
21.4 a)( Determination of sound levels)	-	4500	For 100kVA
21.5.1.1(Pressure test-Type test (For Transformers up to 200 kVA ))	-	5400	For 100kVA
21.5.1.2(Pressure test-routine test (For Transformers up to 200 kVA ))	-	2500	For 100kVA
21.5.2.1(Type test : For Transformers Above 200 kVA and Up to Including 2 500 kVA)	-	9000	-
21.5.2.2(routine test :For Transformers Above 200 kVA and Up to Including 2 500 kVA)	-	4500	-
21.5.2.3( Oil leakage test (routine test))	-	4500	-
21.5.3.1(For Single Phase Distribution Transformers Up to Including 25 kVA : pressure test (type test))	-	5000	-
21.5.3.2(For Single Phase Distribution Transformers Up to Including 25 kVA : pressure test (routine test))	-	2500	-
21.5.3.3(Oil leakage test (routine test))	-	5000	-
21.4 c(No load current at 112.5 percent voltage.)	-	1400	For 100kVA
21.4 d(Paint adhesion tests)	-	3000	For 100kVA
15.5(Total Dry Film Paint Thickness)	-	500	For 100kVA
21.4 e(BDV and moisture content of oil in the transformer)	-	1200	For 100kVA
6.9, 7.9, 8.9(Permissible Flux Density and Over Fluxing)	-	6200	For 100kVA
11(Minimum clearance in Air)	-	200	For 100kVA
6.8 (50%)(Total losses at 50 % load (Watts))	-	3000	-
7.8 (50%)(Total losses at 50 % load (Watts))	-	5000	-
8.8 (50%)(Total losses at 50 % load (Watts))	-	2500	-
6.8 (100%)(Total losses at 100 % load (Watts))	-	3000	-
8.8 (100%)(Total losses at 100 % load (Watts))	-	2500	-
21.5.1.3(Oil leakage test upto 200 KVA)	-	4500	-
17( ABILITY OF TRANSFORMERS TO WITHSTAND EXTERNAL SHORT CIRCUIT )	-	52000	-
16(Conservator for Non-sealed type Transformers)	-	200	For 100kVA
13.1(Marking (Rating Plates))	-	200	For 100kVA
13.2(Terminal Marking Plate)	-	200	For 100kVA
13.3(Marking )	-	200	For 100kVA
13.4(Marking)	-	200	For 100kVA
13.4.1(Marking)	-	200	For 100kVA
14.1(MOUNTING ARRANGEMENT)	-	200	For 100kVA
14.2(MOUNTING ARRANGEMENT)	-	200	For 100kVA
14.3(MOUNTING ARRANGEMENT)	-	200	For 100kVA
14.4(MOUNTING ARRANGEMENT)	-	200	For 100kVA
15.1.1(TRANSFORMER TANK : Construction)	-	200	For 100kVA
15.1.2(TRANSFORMER TANK : Construction)	-	200	For 100kVA
15.1.3(TRANSFORMER TANK : Construction)	-	200	For 100kVA
15.1.4(TRANSFORMER TANK : Construction)	-	200	For 100kVA
15.1.5(TRANSFORMER TANK : Construction)	-	200	For 100kVA
20(Fittings)	-	200	For 100kVA

14 Jul, 2028

-
Excluding : Break Down Voltage Test of Oil, Paint Adhesion Test and Short Circuit Test (above 200 kVA).

8555

TVS LABS

8171826

IS 9537 : Part 3 (1983)

Specification for conduits for electrical installations: Part 3 rigid plain conduits of insulating meterials

4950 View breakup
Rs. 4950/- for sizes up to and including 25mm, Rs. 10000/- above 25mm and up to 50 mm

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1(Marking)	-	500	-
6.2(Durability of Marking as per 6.4 of IS: 9537 (Part 1)-1980)	-	300	-
6.3(Standard Mark on Conduit)	-	250	-
7.1.1(Maximum and minimum outside diameter of socket)	-	500	-
7.1.1 Table-2(Length of Socket end)	-	300	-
7.1.2(Maximum and minimum outside diameter of conduit)	-	500	-
7.2(Minimum inside diameter of conduit)	-	500	-
7.3(Length of conduit)	-	250	-
7.4(Unifomity of The wall Thickness)	-	250	-
8.1(Construction as per clause 8 of IS: 9537 (Part 1)-1980)	-	250	-
9.2(Bending Test i) At Room Temp ii) At Low Temp (-5 ±2°C))	-	1000	-
9.3(Compression Test as per caluse 9.3 of IS: 9537 (Part 1)-1980)	-	1000	-
9.4(Impact Test as per clause 9.4 of IS: 9537 (Part 1)-1980)	-	2500	-
9.5(Collapse Test as per clause 9.5 of IS: 9537 (Part 1)-1980)	-	1500	-
10(Resistance to Heat -Ball presure test)	-	1000	-
11(Resistance to burning as per clause 11 of IS: 9537 (Part 1)-1980)	-	1000	-
12(Electrical Characteristics-Test for electric strength as per clause 12.1.1 of IS: 9537 (Part 1)-1980)	-	1500	-
12(Electrical Characteristics-Insulation resistance test as per clause 12.1.2 of IS: 9537 (Part 1)-1980)	-	1500	-

18 Oct, 2025

-
-

8556

BIS, Central Laboratory (CL)

None

IS 1370 (1993)

Transmission belting - Friction surface rubber belting specification (Third Revision)

- View breakup
Rs. 1200/- + testing charges as per referred ISS (excluding Full thickness breaking strength, Full thickness elongation, Adhesion test, Test on seam strip)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
cl. 3.1 (length)	-
cl. 3.2 (width)	-
cl. 3.3 (thickness)	-
cl. 4.2 (nominal mass)	-
cl. 6 (designation)	-

-
Excluding Full thickness breaking strength, Full thickness elongation, Test on seam strip, Length of endless belt, Adhesion test

8557

TVS LABS

8171826

IS 398 : Part 4 (1994)

Aluminium conductors for overhead transmission purposes: Part 4 aluminium alloy stranded conductors (Aluminium - Magnesium - Silicon Type) - Specification (Third Revision)

8900 View breakup
For 22, 34, 55, 80 & 100 sqmm Rs. 10000/-, For 125, 148, 173, 200 & 465 sqmm Rs. 20,000/- each, For 525, 570, 604, 642, 695 & 767 sqmm Rs. 30,000/- each

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1(Freedom from Defects)	-	250	-
7.1 Table-1(Dimensional measurement of wires)	-	1000	-
7.2.2 Table-2, Table-4(Calculated resistance of Stranded Conductor)	-	1000	-
8.1(Joints in wires-Conductors Containing Seven Wires)	-	0	-
8.2(Joints in wires-Conductors Containing More Than Seven Wires)	-	0	-
9.1(Stranding)	-	0	-
9.2 Table 3(Lay Ratio of stranded conductors)	-	500	-
9.3(Direction of Lay)	-	0	-
9.4(Multiple layers of wires)	-	0	-
11(Packing and Marking)	-	0	-
12.2 Table 1(Breaking Load Test- Before Stranding)	-	1250	-
12.2 Table 1(Breaking Load Test- After Stranding)	-	1250	-
12.3 Table 1(Elongation Test- Before Stranding)	-	1000	-
12.3 Table 1(Elongation Test- After Stranding)	-	1000	-
12.4 Table 1(Resistance of Aluminium wire)	-	1000	-
9.2(Lay Ratio 24 wire layer)	-	500	-
9.2(Lay Ratio 18 wire layer)	-	500	-
9.2(Lay Ratio 12 wire layer)	-	500	-
9.2(Lay Ratio 3/6 wire layer)	-	500	-

18 Oct, 2025

-
-

8558

NBML Building Materials Testing Lab LLP

5171706

IS 3812 (Part 1) (2013)

Pulverized fuel ash - Specification: Part 1 For use as pozzolana in cement, cement mortar and concrete

4000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 6.1, Table 1 - ii(Silicon dioxide (SiO2) - IS 1727)	-	350	1.15% Discount for BIS. 2.GST @ 18% extra as applicable presently any change by the Govt either increase or decrease in GST will be applicable at the time of placement of order.
Cl. 6.1, Table 1 - iv(Magnesium oxide (MgO) - IS 1727)	-	350	1.15% Discount for BIS. 2.GST @ 18% extra as applicable presently any change by the Govt either increase or decrease in GST will be applicable at the time of placement of order.
Cl. 6.1, Table 1 - v( Total sulphur as sulphur trioxide (SO3) - IS 1727)	-	350	1.15% Discount for BIS. 2.GST @ 18% extra as applicable presently any change by the Govt either increase or decrease in GST will be applicable at the time of placement of order.
Cl. 6.1, Table 1 - viii( Loss on ignition - IS 1727)	-	350	1.15% Discount for BIS. 2.GST @ 18% extra as applicable presently any change by the Govt either increase or decrease in GST will be applicable at the time of placement of order.
7.1-Table 2(i)(PHYSICAL REQUIREMENTS-Fineness)	-	650	1.15% Discount for BIS. 2.GST @ 18% extra as applicable presently any change by the Govt either increase or decrease in GST will be applicable at the time of placement of order.
7.1-Table 2(iii)(PHYSICAL REQUIREMENTS-Average compressive strength)	-	800	1.15% Discount for BIS. 2.GST @ 18% extra as applicable presently any change by the Govt either increase or decrease in GST will be applicable at the time of placement of order.
7.1-Table 2(iv)(PHYSICAL REQUIREMENTS-Compressive strength at 28 days)	-	800	1.15% Discount for BIS. 2.GST @ 18% extra as applicable presently any change by the Govt either increase or decrease in GST will be applicable at the time of placement of order.
7.1-Table 2(v)(PHYSICAL REQUIREMENTS-Soundness by autoclave test )	-	650	1.15% Discount for BIS. 2.GST @ 18% extra as applicable presently any change by the Govt either increase or decrease in GST will be applicable at the time of placement of order.

29 Sep, 2025

-
-

8559

NBML Building Materials Testing Lab LLP

5171706

IS 2062 (2011)

Hot rolled medium and high tensile structural steel - Specification (Seventh Revision)

2500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 15(Length, Width & Thickness)	-	150	1.15% Discount for BIS. 2.GST @ 18% extra as applicable presently any change by the Govt either increase or decrease in GST will be applicable at the time of placement of order.
Cl 10.3(UTM)	-	475	1.15% Discount for BIS. 2.GST @ 18% extra as applicable presently any change by the Govt either increase or decrease in GST will be applicable at the time of placement of order.
Cl. 10.3 (Cl. 10.3 (Elongation %))	-	160	1.15% Discount for BIS. 2.GST @ 18% extra as applicable presently any change by the Govt either increase or decrease in GST will be applicable at the time of placement of order.
Cl. 10.3 (Cl. 10.3 (Yield Stress))	-	250	1.15% Discount for BIS. 2.GST @ 18% extra as applicable presently any change by the Govt either increase or decrease in GST will be applicable at the time of placement of order.
Cl. 10.3 (Cl. 10.3 (Tensile Strength))	-	475	1.15% Discount for BIS. 2.GST @ 18% extra as applicable presently any change by the Govt either increase or decrease in GST will be applicable at the time of placement of order.
Clause - 5, 8.1 & 8.2(E650, ALUMINIUM)	-	40	1.15% Discount for BIS. 2.GST @ 18% extra as applicable presently any change by the Govt either increase or decrease in GST will be applicable at the time of placement of order.
Clause - 5, 8.1 & 8.2(E650, SILICON)	-	40	1.15% Discount for BIS. 2.GST @ 18% extra as applicable presently any change by the Govt either increase or decrease in GST will be applicable at the time of placement of order.
Clause - 5, 8.1 & 8.2(E650, NITROGEN)	-	50	1.15% Discount for BIS. 2.GST @ 18% extra as applicable presently any change by the Govt either increase or decrease in GST will be applicable at the time of placement of order.
Clause - 5, 8.1 & 8.2(E650 ,MANGANESE)	-	40	1.15% Discount for BIS. 2.GST @ 18% extra as applicable presently any change by the Govt either increase or decrease in GST will be applicable at the time of placement of order.
Clause - 5, 8.1 & 8.2(E600, PHOSPHURS)	-	40	1.15% Discount for BIS. 2.GST @ 18% extra as applicable presently any change by the Govt either increase or decrease in GST will be applicable at the time of placement of order.
Clause - 5, 8.1 & 8.2(E650, SULPHUR)	-	40	1.15% Discount for BIS. 2.GST @ 18% extra as applicable presently any change by the Govt either increase or decrease in GST will be applicable at the time of placement of order.
Clause - 5, 8.1 & 8.2(E600, CARBON)	-	40	1.15% Discount for BIS. 2.GST @ 18% extra as applicable presently any change by the Govt either increase or decrease in GST will be applicable at the time of placement of order.
Clause 11.3(IS 1599)	-	500	1.15% Discount for BIS. 2.GST @ 18% extra as applicable presently any change by the Govt either increase or decrease in GST will be applicable at the time of placement of order.
Cl 12(Sudden Load Applied)	-	350	1.15% Discount for BIS. 2.GST @ 18% extra as applicable presently any change by the Govt either increase or decrease in GST will be applicable at the time of placement of order.
16(Tolerance)	-	200	1.15% Discount for BIS. 2.GST @ 18% extra as applicable presently any change by the Govt either increase or decrease in GST will be applicable at the time of placement of order.
20(Marking)	-	0	-

29 Sep, 2025

-
Excluding - Y-Groove Crackability (Cl.13) and other tests (Cl.14).

8560

TVS LABS

8171826

IS 398 : Part 2 (1996)

Aluminium conductors for overhead transmission purposes - Specification: Part 2 aluminium conuuctors, galvanized steel - Reinforced (Third Revision)

10500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.1.1 & 13.2 Table-1 (elec)(Diameter of Aluminium Wires Before Stranding)	-	350	-
8.1.1 & 13.2 Table 2 (elec)(Diameter of Steel Wires Before Stranding)	-	350	-
8.1.1 & 13.2 Table-1 (elec)(Diameter of Aluminium Wires After Stranding)	-	350	-
8.1.1 & 13.2 Table 2 (elec)(Diameter of Steel Wires After Stranding)	-	350	-
10 (elec)(Stranding)	-	0	-
10 (elec)(Stranding)	-	0	-
13.3 Table 1 (elec)(Breaking Load of Aluminium Wires Before Stranding)	-	500	-
13.3 Table 2 (elec)(Breaking Load of Steel Wires Before Stranding)	-	500	-
13.3 Table 1 (elec)(Breaking Load of Aluminium Wires After Stranding)	-	500	-
13.4.1 (elec)(Ductility by Torsion Test before stranding)	-	500	-
13.4.1 (mech)(Ductility by Torsion Test before stranding)	-	500	-
13.4.1 (elec)(Ductility by Torsion Test after stranding)	-	500	-
13.4.1 (elec)(Ductility by Torsion Test after stranding)	-	500	-
13.4.2 (elec)(Ductility by Elongation Test before stranding)	-	500	-
13.4.2 (elec)(Ductility by Elongation Test after stranding)	-	500	-
13.5.1 (elec)(Wrapping Test Aluminium Wires Before Stranding)	-	250	-
13.5.1 (elec)(Wrapping Test Aluminium Wires After Stranding)	-	250	-
13.5.2 (elec)(Wrapping Test Galvanized Steel Wires Before Stranding)	-	250	-
13.5.2 (elec)(Wrapping Test Galvanized Steel Wires After Stranding)	-	250	-
13.6 (elec)(Resistance test-Aluminium wire before Stranding)	-	750	-
13.6 (elec)(Resistance test-Aluminium wire after stranding)	-	750	-
13.7.2 (elec)(Mass of Zinc coating)	-	750	-
13.7.2 (elec)(Uniformity of Zinc coating)	-	750	-
13.8 Table-4 (elec)(Lay Ratio- Steel Core (6 Wire Layer))	-	250	-
13.8 Table-4 (elec)(Lay Ratio- Aluminium Wire Innermost Layer of Conductors with 3 Aluminium Wire Layers)	-	250	-
13.8 Table-4 (elec)(Lay Ratio- Aluminium Wire Layer Immediately Beneath Outermost Layer)	-	250	-
13.8 Table-4 (elec)(Lay Ratio- Aluminium Wire Outermost Layer)	-	250	-

18 Oct, 2025

-
Only upto 100 sqmm Rs. 10000/- up to & including 100 sqmm

8561

NBML Building Materials Testing Lab LLP

5171706

IS 1029 (1970)

Specification for hot-rolled steel strip (Baling) (First Revision)

1800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.4(Sulphur -IS 228 or method specified in relevant ISO standard)	-	40	1.15% Discount for BIS. 2.GST @ 18% extra as applicable presently any change by the Govt either increase or decrease in GST will be applicable at the time of placement of order.
Cl.4(Phosphorus -IS 228 or method specified in relevant ISO standard)	-	40	1.15% Discount for BIS. 2.GST @ 18% extra as applicable presently any change by the Govt either increase or decrease in GST will be applicable at the time of placement of order.
5.2(Tensile Test-1608:Part 1)	-	575	1.15% Discount for BIS. 2.GST @ 18% extra as applicable presently any change by the Govt either increase or decrease in GST will be applicable at the time of placement of order.
5.2(Tensile Strength, Mpa)	-	575	1.15% Discount for BIS. 2.GST @ 18% extra as applicable presently any change by the Govt either increase or decrease in GST will be applicable at the time of placement of order.
5.2(Elongation, %)	-	150	1.15% Discount for BIS. 2.GST @ 18% extra as applicable presently any change by the Govt either increase or decrease in GST will be applicable at the time of placement of order.
5.3(Bend Test-1599)	-	150	1.15% Discount for BIS. 2.GST @ 18% extra as applicable presently any change by the Govt either increase or decrease in GST will be applicable at the time of placement of order.
8.2(Width)	-	150	1.15% Discount for BIS. 2.GST @ 18% extra as applicable presently any change by the Govt either increase or decrease in GST will be applicable at the time of placement of order.
8.2(Thickness)	-	150	1.15% Discount for BIS. 2.GST @ 18% extra as applicable presently any change by the Govt either increase or decrease in GST will be applicable at the time of placement of order.

29 Sep, 2025

-
-

8562

NBML Building Materials Testing Lab LLP

5171706

IS 280 (2006)

Mild steel wire for general engineering purposes (Fourth Revision)

1900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 9(Tensile Test On UTM)	-	575	1. 15% Discount for BIS. 2. GST @ 18% extra as applicable presently any change by the Govt either increase or decrease in GST will be applicable at the time of placement of order.
Cl 7 & Table 1(Diameter & Difference Between Two Reading On Any Two Diameters)	-	150	1. 15% Discount for BIS. 2. GST @ 18% extra as applicable presently any change by the Govt either increase or decrease in GST will be applicable at the time of placement of order.
6 AND AS PER IS 7887(MICRO ALLOY)	-	40	1. 15% Discount for BIS. 2. GST @ 18% extra as applicable presently any change by the Govt either increase or decrease in GST will be applicable at the time of placement of order.
6 AND AS PER IS 7887(ALUMINIUM)	-	40	1. 15% Discount for BIS. 2. GST @ 18% extra as applicable presently any change by the Govt either increase or decrease in GST will be applicable at the time of placement of order.
6 AND AS PER IS 7887(PHOSPHORUS)	-	40	1. 15% Discount for BIS. 2. GST @ 18% extra as applicable presently any change by the Govt either increase or decrease in GST will be applicable at the time of placement of order.
6 AND AS PER IS 7887(SULPHUR)	-	40	1. 15% Discount for BIS. 2. GST @ 18% extra as applicable presently any change by the Govt either increase or decrease in GST will be applicable at the time of placement of order.
6 AND AS PER IS 7887(MANGANESE)	-	40	1. 15% Discount for BIS. 2. GST @ 18% extra as applicable presently any change by the Govt either increase or decrease in GST will be applicable at the time of placement of order.
6 AND AS PER IS 7887(SILICON)	-	40	1. 15% Discount for BIS. 2. GST @ 18% extra as applicable presently any change by the Govt either increase or decrease in GST will be applicable at the time of placement of order.
6 AND AS PER IS 7887(CARBON)	-	40	1. 15% Discount for BIS. 2. GST @ 18% extra as applicable presently any change by the Govt either increase or decrease in GST will be applicable at the time of placement of order.
9.3(Bend test)	-	150	1. 15% Discount for BIS. 2. GST @ 18% extra as applicable presently any change by the Govt either increase or decrease in GST will be applicable at the time of placement of order.
11(Coating test)	-	650	1. 15% Discount for BIS. 2. GST @ 18% extra as applicable presently any change by the Govt either increase or decrease in GST will be applicable at the time of placement of order.
7 & 8(Diameter)	-	150	1. 15% Discount for BIS. 2. GST @ 18% extra as applicable presently any change by the Govt either increase or decrease in GST will be applicable at the time of placement of order.

29 Sep, 2025

-
"Only for diameter 5mm and above"

8563

NBML Building Materials Testing Lab LLP

5171706

IS 12894 (2002)

Pulverized fuel ash - Lime bricks - Specification

3500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(Dimensions)	-	200	1.15% Discount for BIS. 2.GST @ 18% extra as applicable presently any change by the Govt either increase or decrease in GST will be applicable at the time of placement of order.
7.1, Table -1(Average Wet Compressive Strength)	-	800	1.15% Discount for BIS. 2.GST @ 18% extra as applicable presently any change by the Govt either increase or decrease in GST will be applicable at the time of placement of order.
7.3(Efflorescence Test)	-	1000	1.15% Discount for BIS. 2.GST @ 18% extra as applicable presently any change by the Govt either increase or decrease in GST will be applicable at the time of placement of order.
7.4(Water Absorption)	-	600	1.15% Discount for BIS. 2.GST @ 18% extra as applicable presently any change by the Govt either increase or decrease in GST will be applicable at the time of placement of order.
5.2(Tolerance)	-	200	1.15% Discount for BIS. 2.GST @ 18% extra as applicable presently any change by the Govt either increase or decrease in GST will be applicable at the time of placement of order.
6(Materials)	-	650	1.15% Discount for BIS. 2.GST @ 18% extra as applicable presently any change by the Govt either increase or decrease in GST will be applicable at the time of placement of order.
7.2(Drying Shrinkage)	-	850	1.15% Discount for BIS. 2.GST @ 18% extra as applicable presently any change by the Govt either increase or decrease in GST will be applicable at the time of placement of order.

29 Sep, 2025

-
-

8564

NBML Building Materials Testing Lab LLP

5171706

IS 13757 (1993)

Burnt Clay Fly Ash Building Bricks-specification

2600 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1(Dimensions)	-	200	1.15% Discount for BIS. 2.GST @ 18% extra as applicable presently any change by the Govt either increase or decrease in GST will be applicable at the time of placement of order.
7.1(Compressive Strength)	-	800	1.15% Discount for BIS. 2.GST @ 18% extra as applicable presently any change by the Govt either increase or decrease in GST will be applicable at the time of placement of order.
7.2(Water Absorption)	-	650	1.15% Discount for BIS. 2.GST @ 18% extra as applicable presently any change by the Govt either increase or decrease in GST will be applicable at the time of placement of order.
7.3(Efforescence)	-	1000	1.15% Discount for BIS. 2.GST @ 18% extra as applicable presently any change by the Govt either increase or decrease in GST will be applicable at the time of placement of order.
6.2(Tolerances)	-	200	1.15% Discount for BIS. 2.GST @ 18% extra as applicable presently any change by the Govt either increase or decrease in GST will be applicable at the time of placement of order.

29 Sep, 2025

-
-

8565

NBML Building Materials Testing Lab LLP

5171706

IS 3812 : Part 2 (2013)

Pulverized Fuel Ash - Part 2 : For Use as Admixture in Cement Mortar and Concrete

3500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1, 6.1, Table 1(Silicon dioxide (SiO2 ) plus aluminium oxide (Al2O3 ) plus iron oxide (Fe2O3 ))	-	350	1. 15% Discount for BIS. 2. GST @ 18% extra as applicable presently any change by the Govt either increase or decrease in GST will be applicable at the time of placement of order.
5.1, 6.1, Table 1(Silicon dioxide (SiO2 ))	-	350	1. 15% Discount for BIS. 2. GST @ 18% extra as applicable presently any change by the Govt either increase or decrease in GST will be applicable at the time of placement of order.
5.1, 6.1, Table 1(Magnesium oxide (MgO)	-	350	1. 15% Discount for BIS. 2. GST @ 18% extra as applicable presently any change by the Govt either increase or decrease in GST will be applicable at the time of placement of order.
5.1, 6.1, Table 1(Total sulphur as sulphur trioxide (SO3)	-	350	1. 15% Discount for BIS. 2. GST @ 18% extra as applicable presently any change by the Govt either increase or decrease in GST will be applicable at the time of placement of order.
5.1, 6.1, Table 1(Total chlorides)	-	350	1. 15% Discount for BIS. 2. GST @ 18% extra as applicable presently any change by the Govt either increase or decrease in GST will be applicable at the time of placement of order.
5.1, 6.1, Table 1(Loss on ignition)	-	350	1. 15% Discount for BIS. 2. GST @ 18% extra as applicable presently any change by the Govt either increase or decrease in GST will be applicable at the time of placement of order.
6.2(moisture content)	-	350	1. 15% Discount for BIS. 2. GST @ 18% extra as applicable presently any change by the Govt either increase or decrease in GST will be applicable at the time of placement of order.
Clauses 5.1 & 7.1 Table No. 2, SI No. (iii) (Soundness by autoclave test - Expansion of specimen)	-	650	1. 15% Discount for BIS. 2. GST @ 18% extra as applicable presently any change by the Govt either increase or decrease in GST will be applicable at the time of placement of order.
Clauses 5.1 & 7.1 Table No. 2, SI No. (i) (Fineness- Specific surface by blaine's method)	-	650	1. 15% Discount for BIS. 2. GST @ 18% extra as applicable presently any change by the Govt either increase or decrease in GST will be applicable at the time of placement of order.

29 Sep, 2025

-
-

8566

NBML Building Materials Testing Lab LLP

5171706

IS 1489 (Part 1) (2015)

Portland pozzolana cement - Specification: Part 1 fly Ash Based

PPC

11000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7 -Table 2- iv- c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	800	1. 15% Discount for BIS. 2. GST @ 18% extra as applicable presently any change by the Govt either increase or decrease in GST will be applicable at the time of placement of order.
7 -Table 2- iv- b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	800	1. 15% Discount for BIS. 2. GST @ 18% extra as applicable presently any change by the Govt either increase or decrease in GST will be applicable at the time of placement of order
7 -Table 2- iv- a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	800	1. 15% Discount for BIS. 2. GST @ 18% extra as applicable presently any change by the Govt either increase or decrease in GST will be applicable at the time of placement of order
7 -Table 2-iii- b(Setting Time Final- 4031 Part 5)	-	450	1. 15% Discount for BIS. 2. GST @ 18% extra as applicable presently any change by the Govt either increase or decrease in GST will be applicable at the time of placement of order
7 -Table 2- iii- a(Setting Time Initial- 4031 Part 5)	-	450	1. 15% Discount for BIS. 2. GST @ 18% extra as applicable presently any change by the Govt either increase or decrease in GST will be applicable at the time of placement of order
7 -Table 2- ii- b(Expansion by Autoclave- 4031 Part 3)	-	550	1. 15% Discount for BIS. 2. GST @ 18% extra as applicable presently any change by the Govt either increase or decrease in GST will be applicable at the time of placement of order
7 -Table 2- ii- a(Expansion by Le Chatelier- 4031 Part 3)	-	550	1. 15% Discount for BIS. 2. GST @ 18% extra as applicable presently any change by the Govt either increase or decrease in GST will be applicable at the time of placement of order
7 -Table 2- i(Fineness 4031 Part 2)	-	650	1. 15% Discount for BIS. 2. GST @ 18% extra as applicable presently any change by the Govt either increase or decrease in GST will be applicable at the time of placement of order
6 - Table - 1 v(Chloride content - Cl 4.13 of IS 4032:1985)	-	350	1. 15% Discount for BIS. 2. GST @ 18% extra as applicable presently any change by the Govt either increase or decrease in GST will be applicable at the time of placement of order
6 - Table - 1 iv(Loss on ignition - Cl 7.1 of IS 4032:1985)	-	350	1. 15% Discount for BIS. 2. GST @ 18% extra as applicable presently any change by the Govt either increase or decrease in GST will be applicable at the time of placement of order
6 - Table - 1 iii(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 7.3 of IS 4032:1985)	-	350	1. 15% Discount for BIS. 2. GST @ 18% extra as applicable presently any change by the Govt either increase or decrease in GST will be applicable at the time of placement of order
6 - Table - 1 ii(Magnesia - Cl 7.2 of IS 4032:1985)	-	350	1. 15% Discount for BIS. 2. GST @ 18% extra as applicable presently any change by the Govt either increase or decrease in GST will be applicable at the time of placement of order
6 - Table - 1 i(Insoluble residue - Cl 7.4 of IS 4032:1985)	-	350	1. 15% Discount for BIS. 2. GST @ 18% extra as applicable presently any change by the Govt either increase or decrease in GST will be applicable at the time of placement of order
7 -Table 2- v(Transverse Strength - IS 4031 Part 8 (Optional))	-	650	1. 15% Discount for BIS. 2. GST @ 18% extra as applicable presently any change by the Govt either increase or decrease in GST will be applicable at the time of placement of order
Clause 7 Table 2 SI No. (v) (Transverse Strength, 672 ± 4 h)	-	650	1. 15% Discount for BIS. 2. GST @ 18% extra as applicable presently any change by the Govt either increase or decrease in GST will be applicable at the time of placement of order
Clause 7Table 2 SI No. (v)(Transverse Strength, 168 ± 2 h)	-	650	1. 15% Discount for BIS. 2. GST @ 18% extra as applicable presently any change by the Govt either increase or decrease in GST will be applicable at the time of placement of order
7 -Table 2- iv- a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	800	1. 15% Discount for BIS. 2. GST @ 18% extra as applicable presently any change by the Govt either increase or decrease in GST will be applicable at the time of placement of order
7 -Table 2- vi(Drying Shrinkage- IS 4031 Part 10)	-	850	1. 15% Discount for BIS. 2. GST @ 18% extra as applicable presently any change by the Govt either increase or decrease in GST will be applicable at the time of placement of order.
6 - Table - 1 vi( Alkali content as (Na2O + 0.658 K2O) - Cl 4.11 of IS 4032:1985)	-	1250	1. 15% Discount for BIS. 2. GST @ 18% extra as applicable presently any change by the Govt either increase or decrease in GST will be applicable at the time of placement of order.

29 Sep, 2025

-
-

8567

TVS LABS

8171826

IS 398 : Part 1 (1996)

Aluminium conductors for overhead transmission purposes - Specification: Part 1 aluminium stranded conductors (Third Revision)

8500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
12.2, Table-1(Measurement of diameter of individual aluminium wire)	-	1250	-
12.3, Table-1(Breaking load before stranding)	-	1250	-
12.3, Table-1(Breaking load after stranding)	-	1250	-
12.4(Wrapping test)	-	1000	-
12.5, Table 1(Resistance test)	-	1250	-
12.6, Table 3(Measurement of lay ratio)	-	1000	-
9.3(Stranding)	-	0	-
6(Freedom from defects)	-	250	-

18 Oct, 2025

-
Rs.2400/- for 7 wire strands, Rs.5625/- for 19 wire strands

8568

NBML Building Materials Testing Lab LLP

5171706

IS 269 (2015)

Ordinary portland cement - Specification (Sixth Revision)

OPC

8300 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7 Table-3 iv c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	800	1. 15% Discount for BIS. 2. GST @ 18% extra as applicable presently any change by the Govt either increase or decrease in GST will be applicable at the time of placement of order.
7 Table-3 iv b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	800	1. 15% Discount for BIS. 2. GST @ 18% extra as applicable presently any change by the Govt either increase or decrease in GST will be applicable at the time of placement of order.
7 Table-3 iv a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	800	1. 15% Discount for BIS. 2. GST @ 18% extra as applicable presently any change by the Govt either increase or decrease in GST will be applicable at the time of placement of order.
7 Table-3 iii b(Setting Time Final)	-	450	1. 15% Discount for BIS. 2. GST @ 18% extra as applicable presently any change by the Govt either increase or decrease in GST will be applicable at the time of placement of order.
7 Table-3 iii a(Setting Time Initial)	-	450	1. 15% Discount for BIS. 2. GST @ 18% extra as applicable presently any change by the Govt either increase or decrease in GST will be applicable at the time of placement of order.
7 Table-3 ii b(Expansion by Autoclave)	-	550	1. 15% Discount for BIS. 2. GST @ 18% extra as applicable presently any change by the Govt either increase or decrease in GST will be applicable at the time of placement of order.
7 Table-3 i.(Fineness)	-	650	1. 15% Discount for BIS. 2. GST @ 18% extra as applicable presently any change by the Govt either increase or decrease in GST will be applicable at the time of placement of order.
6.1 Table-2 vi(Loss on ignition)	-	350	1. 15% Discount for BIS. 2. GST @ 18% extra as applicable presently any change by the Govt either increase or decrease in GST will be applicable at the time of placement of order.
6.1 Table-2 v(Total Sulphur Content calculated as Sulphuric Anhydride)	-	350	1. 15% Discount for BIS. 2. GST @ 18% extra as applicable presently any change by the Govt either increase or decrease in GST will be applicable at the time of placement of order.
6.1 Table-2 iv(Magnesia)	-	350	1. 15% Discount for BIS. 2. GST @ 18% extra as applicable presently any change by the Govt either increase or decrease in GST will be applicable at the time of placement of order.
6.1 Table-2 iii.(Insoluble residue)	-	350	1. 15% Discount for BIS. 2. GST @ 18% extra as applicable presently any change by the Govt either increase or decrease in GST will be applicable at the time of placement of order.
6 - Table - 1 ii(Ratio of percentage of alumina to that of iron oxide - Cl 4 of IS 4032:1985)	-	350	1. 15% Discount for BIS. 2. GST @ 18% extra as applicable presently any change by the Govt either increase or decrease in GST will be applicable at the time of placement of order.
6 - Table - 1 i(Ratio of percentage of lime to percentages of silica, alumina and iron oxide - Cl 4 of IS 4032:1985)	-	350	1. 15% Discount for BIS. 2. GST @ 18% extra as applicable presently any change by the Govt either increase or decrease in GST will be applicable at the time of placement of order.
7 Table-3 v(Transverse Strength - IS 4031 Part 8 (Optional))	-	800	1. 15% Discount for BIS. 2. GST @ 18% extra as applicable presently any change by the Govt either increase or decrease in GST will be applicable at the time of placement of order.
6.1 Table-2 vii(Chloride content)	-	350	1. 15% Discount for BIS. 2. GST @ 18% extra as applicable presently any change by the Govt either increase or decrease in GST will be applicable at the time of placement of order.
7 Table-3 ii a(Expansion by Le Chatelier)	-	1000	1. 15% Discount for BIS. 2. GST @ 18% extra as applicable presently any change by the Govt either increase or decrease in GST will be applicable at the time of placement of order.

29 Sep, 2025

-
-

8569

NBML Building Materials Testing Lab LLP

5171706

IS 456 (2000)

Plain and reinforced concrete - Code of practice (Fourth Revision)

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.4-Table-1 (v)-IS: 3025(P-17)(Suspended matter)	-	250	1.15% Discount for BIS. 2.GST @ 18% extra as applicable presently any change by the Govt either increase or decrease in GST will be applicable at the time of placement of order.
5.4-Table-1 (iv)-IS: 3025(P-32)(Chloride)	-	250	1.15% Discount for BIS. 2.GST @ 18% extra as applicable presently any change by the Govt either increase or decrease in GST will be applicable at the time of placement of order.
5.4-Table-1 (iii)-IS: 3025(P-32)(Chloride)	-	250	1.15% Discount for BIS. 2.GST @ 18% extra as applicable presently any change by the Govt either increase or decrease in GST will be applicable at the time of placement of order.
5.4-Table-1 (ii)-IS: 3025(P-24)(Sulphate)	-	250	1.15% Discount for BIS. 2.GST @ 18% extra as applicable presently any change by the Govt either increase or decrease in GST will be applicable at the time of placement of order.
5.4-Table-1 (i)-IS: 3025(P-18)(In-Organic)	-	250	1.15% Discount for BIS. 2.GST @ 18% extra as applicable presently any change by the Govt either increase or decrease in GST will be applicable at the time of placement of order.
5.4-Table-1 (i)-IS: 3025(P-18)(Organic )	-	250	1.15% Discount for BIS. 2.GST @ 18% extra as applicable presently any change by the Govt either increase or decrease in GST will be applicable at the time of placement of order.
5.4.2-IS: 3025(P-11)(Ph)	-	250	1.15% Discount for BIS. 2.GST @ 18% extra as applicable presently any change by the Govt either increase or decrease in GST will be applicable at the time of placement of order.
Cl 5.4 (b)(Alkalinity)	-	250	1.15% Discount for BIS. 2.GST @ 18% extra as applicable presently any change by the Govt either increase or decrease in GST will be applicable at the time of placement of order.
Cl 5.4 (a)(Acidity)	-	250	1.15% Discount for BIS. 2.GST @ 18% extra as applicable presently any change by the Govt either increase or decrease in GST will be applicable at the time of placement of order.
16.1(Average Compressive Strength)	-	800	1.15% Discount for BIS. 2.GST @ 18% extra as applicable presently any change by the Govt either increase or decrease in GST will be applicable at the time of placement of order.
16.1(Compressive Strength of Individual Samples )	-	800	1.15% Discount for BIS. 2.GST @ 18% extra as applicable presently any change by the Govt either increase or decrease in GST will be applicable at the time of placement of order.
16.1(Compressive Strength of Individual Samples )	-	800	1.15% Discount for BIS. 2.GST @ 18% extra as applicable presently any change by the Govt either increase or decrease in GST will be applicable at the time of placement of order.
16.1(Compressive Strength of Individual Samples )	-	800	1.15% Discount for BIS. 2.GST @ 18% extra as applicable presently any change by the Govt either increase or decrease in GST will be applicable at the time of placement of order.
5.1(Cement)	-	7300	1.For Physical Testing Rs 4000.00 2.For Chemical Testing Rs 3300.00 3.15% Discount for BIS. 4.GST @ 18% extra as applicable presently any change by the Govt either increase or decrease in GST will be applicable at the time of placement of order.
5.3(Aggregates)	-	2500	1.15% Discount for BIS. 2.GST @ 18% extra as applicable presently any change by the Govt either increase or decrease in GST will be applicable at the time of placement of order.
16.2(Flexural Strength)	-	1500	1.15% Discount for BIS. 2.GST @ 18% extra as applicable presently any change by the Govt either increase or decrease in GST will be applicable at the time of placement of order.
17.4(Core test)	-	1800	1.15% Discount for BIS. 2.GST @ 18% extra as applicable presently any change by the Govt either increase or decrease in GST will be applicable at the time of placement of order.
5.2(Mineral Admixtures)	-	2500	1.15% Discount for BIS. 2.GST @ 18% extra as applicable presently any change by the Govt either increase or decrease in GST will be applicable at the time of placement of order.
5.6(Reinforcement)	-	2000	1.15% Discount for BIS. 2.GST @ 18% extra as applicable presently any change by the Govt either increase or decrease in GST will be applicable at the time of placement of order.
8(Durability of concrete)	-	800	1.15% Discount for BIS. 2.GST @ 18% extra as applicable presently any change by the Govt either increase or decrease in GST will be applicable at the time of placement of order.
9(Concrete mix proportioning)	-	8000	1.15% Discount for BIS. 2.GST @ 18% extra as applicable presently any change by the Govt either increase or decrease in GST will be applicable at the time of placement of order.
5.7(Storage of Materials)	-	650	1.15% Discount for BIS. 2.GST @ 18% extra as applicable presently any change by the Govt either increase or decrease in GST will be applicable at the time of placement of order.
7(Workability of Concrete)	-	800	1.15% Discount for BIS. 2.GST @ 18% extra as applicable presently any change by the Govt either increase or decrease in GST will be applicable at the time of placement of order.

29 Sep, 2025

-
"Only for water for construction purpose"

8570

NBML Building Materials Testing Lab LLP

5171706

IS 1786 (2008)

High strength deformed steel bars and wires for concretere inforcement - Specification (Fourth Revision)

1500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.4.2 of IS 1786 (Nickel- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	40	1. 15% Discount for BIS. 2. GST @ 18% extra as applicable presently any change by the Govt either increase or decrease in GST will be applicable at the time of placement of order.
Cl.4.2 of IS 1786 (Vanadium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	40	1. 15% Discount for BIS. 2. GST @ 18% extra as applicable presently any change by the Govt either increase or decrease in GST will be applicable at the time of placement of order.
Cl.4.2 of IS 1786 (Nitrogen- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	40	1. 15% Discount for BIS. 2. GST @ 18% extra as applicable presently any change by the Govt either increase or decrease in GST will be applicable at the time of placement of order.
Cl.4.2 of IS 1786 (Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	40	1. 15% Discount for BIS. 2. GST @ 18% extra as applicable presently any change by the Govt either increase or decrease in GST will be applicable at the time of placement of order.
Cl.4.2 of IS 1786 (Molybdenum- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	40	1. 15% Discount for BIS. 2. GST @ 18% extra as applicable presently any change by the Govt either increase or decrease in GST will be applicable at the time of placement of order.
Cl.4.2 of IS 1786 (Chromium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	40	1. 15% Discount for BIS. 2. GST @ 18% extra as applicable presently any change by the Govt either increase or decrease in GST will be applicable at the time of placement of order.
4.1(Sulphur and phosphorous)	-	40	1. 15% Discount for BIS. 2. GST @ 18% extra as applicable presently any change by the Govt either increase or decrease in GST will be applicable at the time of placement of order.
4.1( Nitrogen%)	-	40	1. 15% Discount for BIS. 2. GST @ 18% extra as applicable presently any change by the Govt either increase or decrease in GST will be applicable at the time of placement of order.
4.1(Ni)	-	40	1. 15% Discount for BIS. 2. GST @ 18% extra as applicable presently any change by the Govt either increase or decrease in GST will be applicable at the time of placement of order.
4.1(Mo)	-	40	1. 15% Discount for BIS. 2. GST @ 18% extra as applicable presently any change by the Govt either increase or decrease in GST will be applicable at the time of placement of order.
4.1(Cr)	-	40	1. 15% Discount for BIS. 2. GST @ 18% extra as applicable presently any change by the Govt either increase or decrease in GST will be applicable at the time of placement of order.
4.1( Ti)	-	40	1. 15% Discount for BIS. 2. GST @ 18% extra as applicable presently any change by the Govt either increase or decrease in GST will be applicable at the time of placement of order.
4.1(V)	-	40	1. 15% Discount for BIS. 2. GST @ 18% extra as applicable presently any change by the Govt either increase or decrease in GST will be applicable at the time of placement of order.
4.1( Nb)	-	40	1. 15% Discount for BIS. 2. GST @ 18% extra as applicable presently any change by the Govt either increase or decrease in GST will be applicable at the time of placement of order.
Cl 8.1(UTM)	-	650	1. 15% Discount for BIS. 2. GST @ 18% extra as applicable presently any change by the Govt either increase or decrease in GST will be applicable at the time of placement of order.
Cl 6.1(Length, Width & Thickness)	-	200	1. 15% Discount for BIS. 2. GST @ 18% extra as applicable presently any change by the Govt either increase or decrease in GST will be applicable at the time of placement of order.
Cl 7.2(Weight)	-	200	1. 15% Discount for BIS. 2. GST @ 18% extra as applicable presently any change by the Govt either increase or decrease in GST will be applicable at the time of placement of order.

29 Sep, 2025

-
"Only for diameter upto 40 mm" & Excluding - Pullout test

8571

TVS LABS

8171826

IS 1554 : Part 1 (1988)

Specification for pvc insulated (Heavy Duty) electric cables: Part 1 for working voltages up to and including 1100 v (Third Revision)

35000 View breakup
Rs. 13500/- for Single core unarmoured cable Category-01; Rs. 20000/- for Single core unarmoured cable Category - C1 / C2 Rs. 16500/- for Single core armoured cable Rs. 24000/- for Single core armoured cable Category - C1 / C2 Rs. 15000/- for up to 4 cores unarmoured cable Category – 01 Rs. 23000/- for up to 4 cores unarmoured cable Category – C1 / C2 Rs. 17000/- for up to 4 cores armoured cable Category – 01 Rs. 22000/- for above 4 cores and up to 12 Cores armoured cable Category – 01 Rs. 27000/- for above 12 cores and up to 19 Cores armoured cable Category – 01 Rs. 35000/- for above 19 cores and up to 37 Cores armoured cable Category – 01 Rs. 45000/- for above 37 cores and up to 61 Cores armoured cable Category – 01 Rs. 25000/- for up to 4 cores armoured cable Category – C1 / C2 Rs. 30000/- for above 4 cores and up to 12 Cores armoured cable Category – C1 / C2 Rs. 35000/- for above 12 cores and up to 19 Cores armoured cable Category – C1 / C2 Rs. 43000/- for above 19 cores and up to 37 Cores armoured cable Category – C1 / C2 Rs. 53000/- for above 37 cores and up to 61 Cores armoured cable Category – C1 / C2 Rs. 2500/- for optional tests (cold bend / cold impact / Armour Resistance)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(MATERIALS : CONDUCTOR)	-	0	-
4.1.1(INSULATION : General Purjose Insulaiion)	-	0	-
4.1.2(INSULATION : Heat Resisting Insulation)	-	0	-
5.1(MATERIALS : FILLER AND INNER SHEATH)	-	0	-
5.2(MATERIALS : FILLER AND INNER SHEATH)	-	0	-
6.1(MATERIALS : ARMGURING)	-	0	-
6.2(MATERIALS : ARMGURING)	-	0	-
7.1.1(OUTER SHEATH : For Cables with General Purpose InsuIafion)	-	0	-
7.1.2(OUTER SHEATH : For Cables with Heat Resisting InsuIalion)	-	0	-
8.1(CONSTRUCTION : CONDUCTOR)	-	0	-
8.2(CONSTRUCTION : CONDUCTOR)	-	0	-
9.1(INSULATION )	-	0	-
9.2(INSULATION : Thickness of Insulation)	-	500	-
9.3(INSULATION :Tolerance on Thickness of Insulation)	-	0	-
9.4(INSULATION : Application of Insulation)	-	0	-
10.1(CORE IDENTIFICATION)	-	0	-
10.2(CORE IDENTIFICATION)	-	0	-
10.3(CORE IDENTIFICATION)	-	0	-
10.3.1(Arrangement of Marking)	-	0	-
11.1(LAYING UP OF CORES)	-	0	-
11.2(LAYING UP OF CORES)	-	0	-
12.1(INNER SHEATH)	-	0	-
12.2(INNER SHEATH)	-	0	-
12.3(INNER SHEATH :Thickness of Inner Sheath)	-	250	-
12.3.1(INNER SHEATH :Thickness of Inner Sheath)	-	250	-
13.1.1(ARMOURING : Application)	-	0	-
13.1.2(Armouring: Coverage )	-	250	-
13.1.3(ARMOURING : Direction of lay )	-	0	-
13.2(ARMOURING : Type of Armour)	-	0	-
13.2.1(ARMOURING : Type of Armour)	-	0	-
13.3(Armouring : Dimensions -Wire Diameter)	-	250	-
13.3(Armouring : Dimensions -Formed wire )	-	250	-
13.4(ARMOURING : Joints)	-	0	-
13.5.1(ARMOURING : Resistance)	-	500	-
13.5.2(ARMOURING : Resistance)	-	500	-
13.6 a)(ARMOURING: Tensile Strength)	-	250	-
13.6 b)(ARMOURING: Elongation )	-	250	-
13.6 c)(ARMOURING: Torsion Test (For round wire ) )	-	250	-
13.6 d)(ARMOURING: Winding Test(For formed wire))	-	250	-
13.6 e)(ARMOURING: Uniformity of zinc coating)	-	350	-
13.6 f)(ARMOURING: Mass of zinc coating )	-	350	-
13.6 g)(ARMOURING: Resistivity)	-	350	-
14.1(OUTER SHEATH)	-	0	-
14.2(OUTER SHEATH)	-	0	-
14.3(OUTER SHEATH : Colour )	-	0	-
14.4.1(Thickness of Outer Sheath : Unarmowed Cables)	-	250	-
14.4.2(Thickness of Outer Sheath : Armoured Cables)	-	250	-
15.1 a) 1)(Tests on conductor : Annealing test ( for copper ))	-	500	-
15.1 a) 2)(Tensile test (for aluminium) - Before stranding )	-	350	-
15.1 a) 2)(Tensile test (for aluminium) - After stranding )	-	350	-
15.1 a) 3)(Tests on conductor : Wrapping test ( for aluminium ))	-	250	-
15.1 a) 4)(Tests on conductor : Conductor resistance test)	-	750	-
15.1 a) 4)(Resistance test - Neutral conductor )	-	500	-
15.1 d)1)(Phyaical tests for insulation : Tensile Test)	-	500	-
15.1 d)1)(Phyaical tests for insulation : Elongation )	-	500	-
15.1 d)1)(Physical tests for sheath : Tensile stregth )	-	250	-
15.1 d)1)(Physical tests for sheath : Elongation )	-	250	-
15.1 d)2)(Phyaical tests for insulation- Ageing in air Oven : Tensile Test)	-	1000	-
15.1 d)2)(Phyaical tests for insulation - Ageing in air oven : Elongation )	-	1000	-
15.1 d)2)(Phyaical tests for insulation - Ageing in air Oven : Tensile Variation )	-	0	-
15.1 d)2)(Phyaical tests for insulation- Ageing in air oven : Elongation Variation )	-	0	-
15.1 d)2)(Physical tests for outer sheath- Ageing in air oven : Tensile stregth )	-	0	-
15.1 d)2)(Physical tests for outer sheath -Ageing in air oven : Elongation )	-	0	-
15.1 d)2)(Physical tests for outer sheath- Ageing in air oven : Tensile stregth Variation )	-	0	-
15.1 d)2)(Physical tests for outer sheath -Ageing in air oven : Elongation Variation )	-	0	-
15.1 d)3)(Phyaical tests for insulation : Shrinkage )	-	250	-
15.1 d)3)(Phyaical tests for insulation : Shrinkage - Crack observed )	-	0	-
15.1 d)3)(Phyaical tests for Sheath : Shrinkage )	-	250	-
15.1 d)3)(Phyaical tests for Sheath : Shrinkage - Crack observed )	-	0	-
15.1 d)4)(Hot deformation : Insulation )	-	500	-
15.1 d)4)(Hot deformation : Sheath )	-	500	-
15.1 d)5)( Loss of mass in air oven- Insulation )	-	1000	-
15.1 d)5)( Loss of mass in air oven- sheath )	-	1000	-
15.1 d)6)(Heat shock test- Insulation )	-	250	-
15.1 d)6)(Heat shock test- sheath )	-	250	-
15.1 d)7)(Thermal stability- insulation )	-	350	-
15.1 d)7)(Thermal stability- Sheath )	-	350	-
15.1 e)(Insulation resistance test : Volume Resistivity )	-	750	-
15.1 e)(Insulation resistance test : IR Constant )	-	0	-
15.1 f)(High voltage test ( water immersion test ))	-	750	-
15.1 g)(High voltage test at room temperature)	-	500	-
15.4 a)(Cold bend test- Insulation ( Optional test))	-	500	-
15.4 a)(Cold bend test- Sheath ( Optional test))	-	500	-
15.4 b)(Cold impact test- Insulation ( Optional test))	-	500	-
15.4 b)(Cold impact test- Sheath ( Optional test))	-	500	-
15.4 c)(Armour resistance test ( for other than mining cables ).- Optional test )	-	350	-
16.1(DETAILS OF TESTS : General)	-	0	-
16.2(DETAILS OF TESTS : High Voltage Test at Room Temperature)	-	0	-
16.3.1(High Voltage Test ( Water Immersion Test ) : a.c. Test)	-	0	-
16.3.2(High Voltage Test ( Water Immersion Test ) : d.c. Test)	-	750	-
16.4(Flammability Test)	-	1000	-
16.5(Oxygen Index Test)	-	1500	-
16.6(Flame Retardance Test on Single Cables)	-	1000	-
16.7(Flame Retardance Test on Bunched Cables)	-	6000	-
16.9(Test for Halogen Acid Gas Evolution)	-	2500	-
16.1(Temperature Index)	-	1500	-
17.1(IDENTIFICATION : Manufacturer’s Identification)	-	0	-
17.2(IDENTIFICATION : Cable Identification)	-	0	-
17.2.1(IDENTIFICATION : Cable Identification)	-	0	-
17.3(IDENTIFICATION : Cable Code)	-	0	-
15.1.e(Insulation resistance Test- Insulation resistance At Maximum rated temperature temperature)	-	0	-
15.1.e(Insulation resistance Test- Insulation resistance constant At Room temperature)	-	0	-
15.1.e(Insulation resistance Test- Volume Resistivity At Maximum rated temperature temperature)	-	0	-
15.1.e(Insulation resistance Test- Volume Resistivity At Room temperature)	-	0	-
16.4(Flammability Test- Un affected portion)	-	0	-
16.4(Flammability Test- Period of Burning)	-	0	-
9.3(Minimum Thickness of Reduce core insulation)	-	0	-
9.2(Thickness of Reduce core insulation)	-	0	-
3.1 Table 2 IS 8130(Number of wires in the conductor)	-	0	-
Cl No. 16.10(Smoke density test)	-	6000	-
Cl No. 16.8(Test for specific optical density of smoke)	-	2500	-
Table 4(Copper purity test)	-	750	-

18 Oct, 2025

-
-

8572

POWERONIC TEST & RESEARCH CENTRE PRIVATE LIMITED

8170206

IS 16246 (2015)

Elastomer insulated cables with limited circuit integrity when affected by fire - Specification

Elastomer insulated cables with limited circuit integri

95000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.4.1( Cables for Fixed Installation)	-	0	-
Cl.5( INSULATION)	-	0	-
Cl. 6.1( Glass Tape)	-	0	-
Cl 6.2( Polyethylene Teraphthalate (PETP) or Polypropylene base Tape)	-	0	-
Cl 6.4( Fire Barrier Tape)	-	0	-
Cl 7(CENTRE AND FILLERS)	-	0	-
Cl 7(CENTRE AND FILLERS)	-	0	-
Cl 8( ARMOUR)	-	750	-
Cl 9.1( Inner Sheath)	-	0	-
Cl 9.2( Outer Sheath)	-	0	-
Cl 10.1( CONDUCTORS)	-	0	-
Cl 10.2( CONDUCTORS)	-	0	-
Cl 11.1( INSULATION)	-	5000	-
Cl 11.2(Thickness of Insulation IS 10810 : Part 6)	-	300	-
Cl 12( CORE IDENTIFICATION)	-	0	-
Cl 15.1( ARMOURING)	-	0	-
Cl 15.3.1( Type of Armour)	-	0	-
Cl 15.3.2( Type of Armour)	-	0	-
Cl 15.3.3( ARMOURING)	-	0	-
Cl 15.4.1( ARMOURING)	-	0	-
Cl 15.4.2( ARMOURING)	-	0	-
Cl 16.2( OUTER SHEATH)	-	0	-
Cl 16.3( Thickness of Outer Sheath - Avg IS 10810 : Part 6)	-	100	-
Cl 16.3( Thickness of Outer Sheath - Minimum IS 10810 : Part 6)	-	100	-
Cl 17.2(Annealing test (for copper) IS 10810 : Part 1)	-	750	-
Cl 17.2(Conductor resistance test IS 10810 : Part 5)	-	1000	-
Cl 17.1(Persulphate test (tinned copper conductor) IS 10810 : Part 4)	-	1000	-
Cl 17.2(Tensile strength before ageing on insulation IS 10810 : Part 7)	-	1000	-
Cl 17.2(elongation at break before ageing on insulation IS 10810 : Part 7)	-	1000	-
Cl 17.2(Tensile strength after Ageing in air bomb IS 10810 : Part 56)	-	2500	-
Cl 17.2(Elongation after Ageing in air bomb IS 10810 : Part 56)	-	2000	-
Cl 17.2(Tensile strength variation)	-	250	-
Cl 17.2(Elongation Variation)	-	250	-
Cl 17.2(Hot set elongation on insulation IS 10810 : Part 30)	-	1000	-
Cl 17.2(Permanent elongation (set) on insulation IS 10810 : Part 30)	-	500	-
Cl 17.1(Tensile strength before ageing on sheath IS 10810 : Part 7)	-	1000	-
Cl 17.1(elongation at break before ageing on sheath IS 10810 : Part 7)	-	1000	-
Cl 17.1(Hot set elongation test on sheath IS 10810 : Part 30)	-	1000	-
Cl 17.1(Permanent elongation (set) test on sheath IS 10810 : Part 30)	-	500	-
Cl 17.1(Oxygen index test on sheath IS 10810 : Part 58)	-	2500	-
Cl 17.1(Temperature index test on sheath IS 10810 : Part 64)	-	2500	-
Cl 17.1(Acid gas generation on sheath IS 10810 : Part 39)	-	5000	-
Cl 17.2(Insulation resistance test IS 10810 : Part 43)	-	1500	-
Cl 17.1(Water absorption test (for insulation) IS 10810 : Part 28)	-	5000	-
Cl 18.2(High Voltage Test IS 10810 : Part 45)	-	1000	-
Cl 18.3 Annex B of IS 16246( Circuit Integrity Test Under Fire Condition)	-	30000	-
Cl 18.4.1( Flame Retardence Test on Single Cable IS 10810 : Part 61)	-	3000	-
Cl 18.4.2(Flame Retardence Test on Bunched Cables IS 10810 : Part 63)	-	18000	-
Cl 19.1( Manufacturer’s Identification)	-	0	-
Cl 19.2( Voltage Identification)	-	0	-
Cl 19.3( Cable Identification)	-	0	-
Cl 19.4( Cable Code)	-	0	-

11 Apr, 2028

-
Included w.e.f. 08-08-2022.

8573

POWERONIC TEST & RESEARCH CENTRE PRIVATE LIMITED

8170206

IS 15787 (2008)

Switch - Socket - Outlets (Non - Interlock Type)

44000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.30 IS 15787:2008(Additional tests on pins providing with insulating sleeves)	-	1000	-
Cl.29 IS 15787:2008(Resistance to Rusting)	-	2000	-
Cl.28 IS 15787:2008(Resistance of insulating material to Abnormal Heat , To Fire & To tracking )	-	3000	-
Cl.27 IS 15787:2008(Creepage distance, clearances & Distance through sealing compounds)	-	1000	-
Cl.26 IS 15787:2008(Screws, current carrying parts & connections)	-	500	-
Cl.25 IS 15787:2008(Resistance to heat )	-	1000	-
Cl.24 IS 15787:2008(Mechanical strength)	-	1000	-
Cl.23 IS 15787:2008(Flexible cables & their connections)	-	1000	-
Cl.22 IS 15787:2008(Force necessary to withdraw the plug )	-	1000	-
Cl.21 IS 15787:2008(Normal operation )	-	2000	-
Cl.20 IS 15787:2008(Making & Breaking )	-	2000	-
Cl.19 IS 15787:2008(Temperature rise )	-	3000	-
Cl.18 IS 15787:2008(Operation of Earthing Contacts)	-	2000	-
Cl.17 IS 15787:2008(Insulation resistance & electric strength )	-	2000	-
Cl.16 IS 15787:2008(Resistance to ageing,To harmful ingress of water and To Humidity)	-	5000	-
Cl.15 IS 15787:2008(Interlocked Socket-outlet )	-	500	-
Cl.14 IS 15787:2008(Construction of Plugs and Portable Socket- Outlet )	-	500	-
Cl.13 IS 15787:2008(Construction of fixed socket outlet)	-	500	-
Cl.12 IS 15787:2008(Terminals)	-	500	-
Cl.11 IS 15787:2008(Provision for earthing )	-	2000	-
Cl.10 IS 15787:2008(Protection against to electric shock )	-	2000	-
Cl.9 IS 15787:2008(Checking of dimension)	-	500	-
Cl.8 IS 15787:2008(Marking )	-	0	-
Cl.7 IS 15787:2008(Classification)	-	0	-
Cl.6 IS 15787:2008(Ratings )	-	0	-
Cl.30 IS 15787:2008(Additional tests on pins providing with insulating sleeves)	-	0	-
Cl.29 IS 15787:2008(Resistance to Rusting)	-	0	-
Cl.28 IS 15787:2008(Resistance of insulating material to Abnormal Heat , To Fire & To tracking )	-	0	-
Cl.27 IS 15787:2008(Creepage distance, clearances & Distance through sealing compounds)	-	0	-
Cl.26 IS 15787:2008(Screws, current carrying parts & connections)	-	0	-
Cl.25 IS 15787:2008(Resistance to heat )	-	0	-
Cl.24 IS 15787:2008(Mechanical strength)	-	0	-
Cl.23 IS 15787:2008(Flexible cables & their connections)	-	0	-
Cl.22 IS 15787:2008(Force necessary to withdraw the plug )	-	0	-
Cl.21 IS 15787:2008(Normal operation )	-	0	-
Cl.20 IS 15787:2008(Making & Breaking )	-	0	-
Cl.19 IS 15787:2008(Temperature rise )	-	0	-
Cl.18 IS 15787:2008(Operation of Earthing Contacts)	-	0	-
Cl.17 IS 15787:2008(Insulation resistance & electric strength )	-	0	-
Cl.16 IS 15787:2008(Resistance to ageing,To harmful ingress of water and To Humidity)	-	0	-
Cl.15 IS 15787:2008(Interlocked Socket-outlet )	-	0	-
Cl.14 IS 15787:2008(Construction of Plugs and Portable Socket- Outlet )	-	0	-
Cl.13 IS 15787:2008(Construction of fixed socket outlet)	-	0	-
Cl.12 IS 15787:2008(Terminals)	-	0	-
Cl.11 IS 15787:2008(Provision for earthing )	-	0	-
Cl.10 IS 15787:2008(Protection against to electric shock )	-	0	-
Cl.9 IS 15787:2008(Checking of dimension)	-	0	-
Cl.8 IS 15787:2008(Marking )	-	0	-
Cl.7 IS 15787:2008(Classification)	-	0	-
Cl.6 IS 15787:2008(Ratings )	-	0	-

11 Apr, 2028

-
Included w.e.f. 08-08-2022.

8574

POWERONIC TEST & RESEARCH CENTRE PRIVATE LIMITED

8170206

IS 1169 (1967)

Specification for electric pedestal type fans and regulators (First Revision)

Specification for electric pedestal type fans and regul

17200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
18( Tolerances on rating)	-	350	-
17(Performance Reqirement)	-	550	-
16.14(Insulation-resistance )	-	750	-
16.13(Flash Test)	-	500	-
16.12(Measurement of Fan Speed)	-	750	-
16.11(Electrical Input Test)	-	750	-
16.1(Earthing Continuity Test)	-	750	-
16.9(High Voltage)	-	1500	-
16.8(AC Leakage Test)	-	1500	-
16.7(Power Factor)	-	750	-
16.6(Mechanical Endurance Test (for Regulators only))	-	550	-
16.5(Cord grip test)	-	250	-
16.4(Moisture Proofness Test (for Regulators only))	-	1000	-
16.3(Temperature-rise)	-	750	-
16.2(Air Delivery Test)	-	2000	-
15(Marking)	-	0	-
14(Oscillating Mechanism)	-	750	-
13(Silent Operation)	-	750	-
12(Interchangeability)	-	0	-
11(Starting)	-	1000	-
10(Speed Regulators)	-	750	-
9(Insulating Materials)	-	0	-
8(Height of the Fan)	-	0	-
7(Finish)	-	500	-
6(Design and General Construction)	-	750	-
5(Rated Frequency)	-	0	-
4(Rated Voltage)	-	0	-
3(Sizes, Speed & Types)	-	0	-
18( Tolerances on rating)	-	0	-
17(Performance Reqirement)	-	0	-
16.14(Insulation-resistance )	-	0	-
16.13(Flash Test)	-	0	-
16.12(Measurement of Fan Speed)	-	0	-
16.11(Electrical Input Test)	-	0	-
16.1(Earthing Continuity Test)	-	0	-
16.9(High Voltage)	-	0	-
16.8(AC Leakage Test)	-	0	-
16.7(Power Factor)	-	0	-
16.6(Mechanical Endurance Test (for Regulators only))	-	0	-
16.5(Cord grip test)	-	0	-
16.4(Moisture Proofness Test (for Regulators only))	-	0	-
16.3(Temperature-rise)	-	0	-
16.2(Air Delivery Test)	-	0	-
15(Marking)	-	0	-
14(Oscillating Mechanism)	-	0	-
13(Silent Operation)	-	0	-
12(Interchangeability)	-	0	-
11(Starting)	-	0	-
10(Speed Regulators)	-	0	-
9(Insulating Materials)	-	0	-
8(Height of the Fan)	-	0	-
7(Finish)	-	0	-
6(Design and General Construction)	-	0	-
5(Rated Frequency)	-	0	-
4(Rated Voltage)	-	0	-
3(Sizes, Speed & Types)	-	0	-
18( Tolerances on rating)	-	0	-
17(Performance Reqirement)	-	0	-
16.14(Insulation-resistance )	-	0	-
16.13(Flash Test)	-	0	-
16.12(Measurement of Fan Speed)	-	0	-
16.11(Electrical Input Test)	-	0	-
16.1(Earthing Continuity Test)	-	0	-
16.9(High Voltage)	-	0	-
16.8(AC Leakage Test)	-	0	-
16.7(Power Factor)	-	0	-
16.6(Mechanical Endurance Test (for Regulators only))	-	0	-
16.5(Cord grip test)	-	0	-
16.4(Moisture Proofness Test (for Regulators only))	-	0	-
16.3(Temperature-rise)	-	0	-
16.2(Air Delivery Test)	-	0	-
15(Marking)	-	0	-
14(Oscillating Mechanism)	-	0	-
13(Silent Operation)	-	0	-
12(Interchangeability)	-	0	-
11(Starting)	-	0	-
10(Speed Regulators)	-	0	-
9(Insulating Materials)	-	0	-
8(Height of the Fan)	-	0	-
7(Finish)	-	0	-
6(Design and General Construction)	-	0	-
5(Rated Frequency)	-	0	-
4(Rated Voltage)	-	0	-
3(Sizes, Speed & Types)	-	0	-

11 Apr, 2028

-
-

8575

POWERONIC TEST & RESEARCH CENTRE PRIVATE LIMITED

8170206

IS 2312 (1967)

Specification for propeller type AC ventilating fans (First Revision)

Specification for propeller type AC ventilating fans (F

15250 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
13.1(Marking)	-	0	-
13.1 (a)(Marking)	-	0	-
13.1 (b)(Marking)	-	0	-
13.1 (c)(Marking)	-	0	-
13.1 (d)(Marking)	-	0	-
13.1 (e)(Marking)	-	0	-
13.1 (f)(Marking)	-	0	-
13.1 (g)(Marking)	-	0	-
13.1 (h)(Marking)	-	0	-
13.1 (j)(Marking)	-	0	-
13.2(Marking)	-	0	-
13.4(Marking)	-	0	-
3.1(Sizes )	-	0	-
4.1(Rated Voltage)	-	0	-
5.1(Rated frequency)	-	0	-
6.1(Design and General Construction)	-	0	-
6.3(Design and General Construction)	-	0	-
6.3(Design and General Construction)	-	0	-
6.4(Design and General Construction)	-	0	-
6.5(Design and General Construction)	-	0	-
6.6(Design and General Construction)	-	0	-
6.7(Design and General Construction)	-	0	-
6.9(Design and General Construction)	-	0	-
6.1(Design and General Construction)	-	0	-
6.11(Design and General Construction)	-	0	-
6.12(Design and General Construction)	-	0	-
7.1(Design and General Construction)	-	0	-
8.1(Design and General Construction)	-	0	-
9(Design and General Construction)	-	0	-
10.1(Starting )	-	1000	-
11.1(Interchangeability)	-	0	-
14.2 & 15.1(Air Delivery)	-	3000	-
14.3.A(Temperature-Rise (for motors))	-	3000	-
14.3.B(Temperature-Rise (for regulators))	-	1000	-
14.3.B(Moistureproofness (for regulators only))	-	2000	-
14.5(Mechanical Endurance (for regulators only))	-	1000	-
14.1 & 14.6(Power factor)	-	750	-
14.8(High voltage test)	-	1000	-
14.9(Insulation-Resistance)	-	750	-
14.1(Earthing continuity)	-	750	-
14.11 & 15.1(Electrical Input)	-	500	-
14.12 & 16(Fan Speed)	-	500	-
13.1(Marking)	-	0	-
13.1 (a)(Marking)	-	0	-
13.1 (b)(Marking)	-	0	-
13.1 (c)(Marking)	-	0	-
13.1 (d)(Marking)	-	0	-
13.1 (e)(Marking)	-	0	-
13.1 (f)(Marking)	-	0	-
13.1 (g)(Marking)	-	0	-
13.1 (h)(Marking)	-	0	-
13.1 (j)(Marking)	-	0	-
13.2(Marking)	-	0	-
13.4(Marking)	-	0	-
3.1(Sizes )	-	0	-
4.1(Rated Voltage)	-	0	-
5.1(Rated frequency)	-	0	-
6.1(Design and General Construction)	-	0	-
6.3(Design and General Construction)	-	0	-
6.3(Design and General Construction)	-	0	-
6.4(Design and General Construction)	-	0	-
6.5(Design and General Construction)	-	0	-
6.6(Design and General Construction)	-	0	-
6.7(Design and General Construction)	-	0	-
6.9(Design and General Construction)	-	0	-
6.1(Design and General Construction)	-	0	-
6.11(Design and General Construction)	-	0	-
6.12(Design and General Construction)	-	0	-
7.1(Design and General Construction)	-	0	-
8.1(Design and General Construction)	-	0	-
9(Design and General Construction)	-	0	-
10.1(Starting )	-	0	-
11.1(Interchangeability)	-	0	-
14.2 & 15.1(Air Delivery)	-	0	-
14.3.A(Temperature-Rise (for motors))	-	0	-
14.3.B(Temperature-Rise (for regulators))	-	0	-
14.3.B(Moistureproofness (for regulators only))	-	0	-
14.5(Mechanical Endurance (for regulators only))	-	0	-
14.1 & 14.6(Power factor)	-	0	-
14.8(High voltage test)	-	0	-
14.9(Insulation-Resistance)	-	0	-
14.1(Earthing continuity)	-	0	-
14.11 & 15.1(Electrical Input)	-	0	-
14.12 & 16(Fan Speed)	-	0	-

11 Apr, 2028

-
Included w.e.f. 08-08-2022.

8576

POWERONIC TEST & RESEARCH CENTRE PRIVATE LIMITED

8170206

IS 9537 : Part 2 (1981)

Specification for conduits for electrical installations: Part 2 rigid steel conduits

Conduits for electrical installations:Part 2 Rigid stee

2550 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1(Marking, IS 9537-2)	-	0	-
6.1(Marking, IS 9537-2)	-	0	-
6.1(Marking, IS 9537-2)	-	0	-
6.3(Marking, Cl. 6.4 of IS 9537-1)	-	0	-
6.2(Marking, IS 9537-2)	-	0	-
7.2.1(Dimensions, (Minimum outside Diameter), IS 9537-2)	-	100	-
7.2.2(Dimensions (Maximum outside Diameter), IS 9537-2)	-	100	-
7.3(Dimensions (Wall thickness), IS 9537-2)	-	100	-
7.3.3(Uniformity of wall thickness, IS 9537-2)	-	100	-
7.4(Screw threads, IS 9537-2)	-	50	-
6.1(Marking, IS 9537-2)	-	0	-
6.1(Marking, IS 9537-2)	-	0	-
6.1(Marking, IS 9537-2)	-	0	-
6.3(Marking, Cl. 6.4 of IS 9537-1)	-	0	-
6.2(Marking, IS 9537-2)	-	0	-
7.2.1(Dimensions, (Minimum outside Diameter), IS 9537-2)	-	0	-
7.2.2(Dimensions (Maximum outside Diameter), IS 9537-2)	-	0	-
7.3(Dimensions (Wall thickness), IS 9537-2)	-	0	-
7.3.3(Uniformity of wall thickness, IS 9537-2)	-	0	-
7.4(Screw threads, IS 9537-2)	-	0	-
8.1(Construction, Cl. 8 of IS 9537-1)	-	100	-
8.2(Construction, IS 9537-2)	-	100	-
9.2(Mechanical Properties (Bending test), Cl. 9.3 of IS 9537-1)	-	1500	-
6.1(Marking, IS 9537-2)	-	0	-
6.1(Marking, IS 9537-2)	-	0	-
6.1(Marking, IS 9537-2)	-	0	-
6.3(Marking, Cl. 6.4 of IS 9537-1)	-	0	-
6.2(Marking, IS 9537-2)	-	0	-
7.2.1(Dimensions, (Minimum outside Diameter), IS 9537-2)	-	0	-
7.2.2(Dimensions (Maximum outside Diameter), IS 9537-2)	-	0	-
7.3(Dimensions (Wall thickness), IS 9537-2)	-	0	-
7.3.3(Uniformity of wall thickness, IS 9537-2)	-	0	-
7.4(Screw threads, IS 9537-2)	-	0	-
8.1(Construction, Cl. 8 of IS 9537-1)	-	0	-
8.2(Construction, IS 9537-2)	-	0	-
9.2(Mechanical Properties (Bending test), Cl. 9.3 of IS 9537-1)	-	0	-
9.3(Mechanical Properties (Compression Test), IS 9537-2)	-	150	-
13(External Influences, IS 9537-2)	-	250	-
6.1(Marking, IS 9537-2)	-	0	-
6.1(Marking, IS 9537-2)	-	0	-
6.1(Marking, IS 9537-2)	-	0	-
6.3(Marking, Cl. 6.4 of IS 9537-1)	-	0	-
6.2(Marking, IS 9537-2)	-	0	-
7.2.1(Dimensions, (Minimum outside Diameter), IS 9537-2)	-	0	-
7.2.2(Dimensions (Maximum outside Diameter), IS 9537-2)	-	0	-
7.3(Dimensions (Wall thickness), IS 9537-2)	-	0	-
7.3.3(Uniformity of wall thickness, IS 9537-2)	-	0	-
7.4(Screw threads, IS 9537-2)	-	0	-
8.1(Construction, Cl. 8 of IS 9537-1)	-	0	-
8.2(Construction, IS 9537-2)	-	0	-
9.2(Mechanical Properties (Bending test), Cl. 9.3 of IS 9537-1)	-	0	-
9.3(Mechanical Properties (Compression Test), IS 9537-2)	-	0	-
13(External Influences, IS 9537-2)	-	0	-
6.1(Marking, IS 9537-2)	-	0	-
6.1(Marking, IS 9537-2)	-	0	-
6.1(Marking, IS 9537-2)	-	0	-
6.3(Marking, Cl. 6.4 of IS 9537-1)	-	0	-
6.2(Marking, IS 9537-2)	-	0	-
7.2.1(Dimensions, (Minimum outside Diameter), IS 9537-2)	-	0	-
7.2.2(Dimensions (Maximum outside Diameter), IS 9537-2)	-	0	-
7.3(Dimensions (Wall thickness), IS 9537-2)	-	0	-
7.3.3(Uniformity of wall thickness, IS 9537-2)	-	0	-
7.4(Screw threads, IS 9537-2)	-	0	-
8.1(Construction, Cl. 8 of IS 9537-1)	-	0	-
8.2(Construction, IS 9537-2)	-	0	-
9.2(Mechanical Properties (Bending test), Cl. 9.3 of IS 9537-1)	-	0	-
9.3(Mechanical Properties (Compression Test), IS 9537-2)	-	0	-
13(External Influences, IS 9537-2)	-	0	-

11 Apr, 2028

-
Included w.e.f. 08-08-2022.

8577

POWERONIC TEST & RESEARCH CENTRE PRIVATE LIMITED

8170206

IS 2593 (1984)

Flexible Cables for Miners' Cap-lamps

38250 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(CONDUCTOR)	-	0	-
3.1.1(Per sulphate test )	-	750	-
3.1.2(Resistance test )	-	1000	-
4.1(INSULATION)	-	0	-
5.1(CENTRAL STRAIN CORD)	-	0	-
6.1(SHEATH)	-	0	-
7.1(Construction : Conductor )	-	0	-
8.1(Thickness of Insulation - Average )	-	500	-
8.1(Thickness of Insulation - minimum)	-	500	-
3.1(CONDUCTOR)	-	0	-
3.1.1(Per sulphate test )	-	0	-
3.1.2(Resistance test )	-	0	-
4.1(INSULATION)	-	0	-
5.1(CENTRAL STRAIN CORD)	-	0	-
6.1(SHEATH)	-	0	-
7.1(Construction : Conductor )	-	0	-
8.1(Thickness of Insulation - Average )	-	0	-
8.1(Thickness of Insulation - minimum)	-	0	-
3.1(CONDUCTOR)	-	0	-
3.1.1(Per sulphate test )	-	0	-
3.1.2(Resistance test )	-	0	-
4.1(INSULATION)	-	0	-
5.1(CENTRAL STRAIN CORD)	-	0	-
6.1(SHEATH)	-	0	-
7.1(Construction : Conductor )	-	0	-
8.1(Thickness of Insulation - Average )	-	0	-
8.1(Thickness of Insulation - minimum)	-	0	-
11.3(Coulor of sheath )	-	0	-
12.1(OVERALL DIAMETER)	-	250	-
13.1 b)(Annealing test)	-	500	-
13.1 e) 1)(Physical tests for insulation: Tensile strength )	-	500	-
13.1 e) 1)(Physical tests for insulation: elongation at break )	-	500	-
13.1 e) 1)(Physical tests for Sheath : Tensile strength )	-	0	-
13.1 e) 1)(Physical tests for Sheath: elongation at break )	-	0	-
13.1 e) 2)(Ageing in air oven ( for insulation ) : Tensile Strength )	-	750	-
13.1 e) 2)(Ageing in air oven ( for insulation ) : Tensile Strength variation )	-	0	-
13.1 e) 2)(Ageing in air oven ( for insulation ) : elongation variation at break)	-	750	-
13.1 e) 2)(Ageing in air oven ( for insulation ) : elongation variation at break)	-	0	-
13.1 e) 3)(Ageing in oxygen bomb ( for insulation ) : Tensile Strength variation )	-	3000	-
13.1 e) 3)(Ageing in oxygen bomb ( for insulation ) : elongation variation at break)	-	3000	-
13.1 e) 3)(Ageing in air bomb ( for sheath ) : Tensile Strength variation )	-	3000	-
13.1 e) 3)(Ageing in air bomb ( for sheath ) : elongation variation at break)	-	3000	-
13.1 e) 4)(Oil resistance test ( for sheath ) : Tensile strength variation )	-	2500	-
13.1 e) 4)(Oil resistance test ( for sheath ) : Elongation variation )	-	2500	-
14.1(Voltage test)	-	1000	-
14.2(Flammability test)	-	750	-
14.3.1(Centre Strain Cord : Breaking Load )	-	750	-
14.3.2(Centre Strain Cord : Determination of Copper and Manganese Content)	-	750	-
14.4(Checking of overall diameter of cable)	-	500	-
14.5(Resistance of sheath to fatty acids : Weigth Increase )	-	2500	-
14.5(Resistance of sheath to fatty acids : Diameter Increase )	-	2500	-
15.1(MANUFACTURER'S IDENTIFICATION)	-	0	-
16.1(Packing )	-	0	-
16.2(Marking )	-	0	-
16.2.1(Standards Mark )	-	0	-
6.1(Resistance of Sheath to Fatty Acids - 14.5 - diameter increase)	-	2500	-
6.1(Resistance of Sheath to Fatty Acids - 14.5 - weight increase)	-	2500	-
5.1(Copper and Manganese Content - Cl 14.3.2)	-	750	-
3.1.1(mass of copper - Cl 7.1 of IS 8130 read with Method B of IS 10810 (Part 4))	-	750	-
3.1(CONDUCTOR)	-	0	-
3.1.1(Per sulphate test )	-	0	-
3.1.2(Resistance test )	-	0	-
4.1(INSULATION)	-	0	-
5.1(CENTRAL STRAIN CORD)	-	0	-
6.1(SHEATH)	-	0	-
7.1(Construction : Conductor )	-	0	-
8.1(Thickness of Insulation - Average )	-	0	-
8.1(Thickness of Insulation - minimum)	-	0	-
11.3(Coulor of sheath )	-	0	-
12.1(OVERALL DIAMETER)	-	0	-
13.1 b)(Annealing test)	-	0	-
13.1 e) 1)(Physical tests for insulation: Tensile strength )	-	0	-
13.1 e) 1)(Physical tests for insulation: elongation at break )	-	0	-
13.1 e) 1)(Physical tests for Sheath : Tensile strength )	-	0	-
13.1 e) 1)(Physical tests for Sheath: elongation at break )	-	0	-
13.1 e) 2)(Ageing in air oven ( for insulation ) : Tensile Strength )	-	0	-
13.1 e) 2)(Ageing in air oven ( for insulation ) : Tensile Strength variation )	-	0	-
13.1 e) 2)(Ageing in air oven ( for insulation ) : elongation variation at break)	-	0	-
13.1 e) 2)(Ageing in air oven ( for insulation ) : elongation variation at break)	-	0	-
13.1 e) 3)(Ageing in oxygen bomb ( for insulation ) : Tensile Strength variation )	-	0	-
13.1 e) 3)(Ageing in oxygen bomb ( for insulation ) : elongation variation at break)	-	0	-
13.1 e) 3)(Ageing in air bomb ( for sheath ) : Tensile Strength variation )	-	0	-
13.1 e) 3)(Ageing in air bomb ( for sheath ) : elongation variation at break)	-	0	-
13.1 e) 4)(Oil resistance test ( for sheath ) : Tensile strength variation )	-	0	-
13.1 e) 4)(Oil resistance test ( for sheath ) : Elongation variation )	-	0	-
14.1(Voltage test)	-	0	-
14.2(Flammability test)	-	0	-
14.3.1(Centre Strain Cord : Breaking Load )	-	0	-
14.3.2(Centre Strain Cord : Determination of Copper and Manganese Content)	-	0	-
14.4(Checking of overall diameter of cable)	-	0	-
14.5(Resistance of sheath to fatty acids : Weigth Increase )	-	0	-
14.5(Resistance of sheath to fatty acids : Diameter Increase )	-	0	-
15.1(MANUFACTURER'S IDENTIFICATION)	-	0	-
16.1(Packing )	-	0	-
16.2(Marking )	-	0	-
16.2.1(Standards Mark )	-	0	-

11 Apr, 2028

-
Included w.e.f. 08-08-2022.

8578

POWERONIC TEST & RESEARCH CENTRE PRIVATE LIMITED

8170206

IS 5950 (1984)

Specification for shot firing cables (For Use Other Than In Shafts) (First Revision)

Specification for shot firing cables (For Use Other Tha

12150 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(Conductor : Material -IS : 8130-2013)	-	0	-
4.1(Insulation : Material -IS : 5831-1984)	-	0	-
5.1(Sheath : materail IS : 5831-1984)	-	0	-
6.1(Conductor : Construction IS : 8130-2013)	-	0	-
7.1(Insulation : Application )	-	0	-
7.2(Thickness of Insulation - average )	-	250	20 % Discount to BIS
7.2(Thickness of Insulation - Min. )	-	250	20 % Discount to BIS
7.3(Colour of Insulation)	-	0	-
9.1 a)(Annealing test)	-	500	20 % Discount to BIS
9.1 b)(Conductor resistance test)	-	750	20 % Discount to BIS
8.1, 9.1 (c)(Nominal radial thickness of sheath)	-	100	20 % Discount to BIS
8.2(Thickness of Sheath)	-	250	20 % Discount to BIS
8.2(Thickness of Sheath - min.)	-	250	20 % Discount to BIS
9.1 d) i)(Insulation : Tensile strength)	-	500	20 % Discount to BIS
9.1 d) i)(Insulation : elongation at break)	-	500	20 % Discount to BIS
9.1 d) i)(Sheath : Tensile strength)	-	500	20 % Discount to BIS
9.1 d) i)(Sheath : elongation at break)	-	500	20 % Discount to BIS
9.1 d) ii)(Ageing in air oven - Insulation : Tensile strength)	-	750	20 % Discount to BIS
9.1 d) ii)(Ageing in air oven - Insulation : Tensile strength Variation)	-	0	-
9.1 d) ii)(Ageing in air oven - Insulation : elongation at break)	-	750	20 % Discount to BIS
9.1 d) ii)(Ageing in air oven - Insulation : elongation variation at break)	-	0	-
9.1 d) ii)(Ageing in air oven - Sheath : Tensile strength)	-	750	20 % Discount to BIS
9.1 d) ii)(Ageing in air oven - Sheath : Tensile strength variation )	-	0	-
9.1 d) ii)(Ageing in air oven - Sheath : elongation at break)	-	750	20 % Discount to BIS
9.1 d) ii)(Ageing in air oven - Sheath : elongation variation at break)	-	0	-
9.1 d) iii )(Loss of mass test - insulation )	-	200	20 % Discount to BIS
9.1 d) iii )(Loss of mass test - Sheath )	-	200	20 % Discount to BIS
9.1 d) iv )(Hot deformation - insulation )	-	300	20 % Discount to BIS
9.1 d) iv )(Hot deformation - sheath )	-	300	20 % Discount to BIS
9.1 d) v )(Heat shock - insulation )	-	500	20 % Discount to BIS
9.1 d) v )(Heat shock - Sheath )	-	500	20 % Discount to BIS
9.1 d) vi )(Shrinkage - insulation )	-	500	20 % Discount to BIS
9.1 d) vi )(Shrinkage : Crack observed - insulation )	-	0	-
9.1 d) vi )(Shrinkage - Sheath )	-	500	20 % Discount to BIS
9.1 d) vi )(Shrinkage: Crack observed - Sheath )	-	0	-
10.2(Voltage test )	-	800	20 % Discount to BIS
9.1 f)(Insulation resistance test: Volume resistivity )	-	200	20 % Discount to BIS
9.1 f)(Insulation resistance test : IR constant)	-	500	20 % Discount to BIS
10.4(Flammability Test )	-	500	20 % Discount to BIS
11.1(Manufacturer’s Identification)	-	0	-
11.2(Cable Code)	-	0	-
12.1(packing )	-	0	-
12.2(Marking )	-	0	-
12.2.1(Standard marks )	-	0	-
3.1(Conductor : Material -IS : 8130-2013)	-	0	-
4.1(Insulation : Material -IS : 5831-1984)	-	0	-
5.1(Sheath : materail IS : 5831-1984)	-	0	-
6.1(Conductor : Construction IS : 8130-2013)	-	0	-
7.1(Insulation : Application )	-	0	-
7.2(Thickness of Insulation - average )	-	0	-
7.2(Thickness of Insulation - Min. )	-	0	-
7.3(Colour of Insulation)	-	0	-
9.1 a)(Annealing test)	-	0	-
9.1 b)(Conductor resistance test)	-	0	-
8.1, 9.1 (c)(Nominal radial thickness of sheath)	-	0	-
8.2(Thickness of Sheath)	-	0	-
8.2(Thickness of Sheath - min.)	-	0	-
9.1 d) i)(Insulation : Tensile strength)	-	0	-
9.1 d) i)(Insulation : elongation at break)	-	0	-
9.1 d) i)(Sheath : Tensile strength)	-	0	-
9.1 d) i)(Sheath : elongation at break)	-	0	-
9.1 d) ii)(Ageing in air oven - Insulation : Tensile strength)	-	0	-
9.1 d) ii)(Ageing in air oven - Insulation : Tensile strength Variation)	-	0	-
9.1 d) ii)(Ageing in air oven - Insulation : elongation at break)	-	0	-
9.1 d) ii)(Ageing in air oven - Insulation : elongation variation at break)	-	0	-
9.1 d) ii)(Ageing in air oven - Sheath : Tensile strength)	-	0	-
9.1 d) ii)(Ageing in air oven - Sheath : Tensile strength variation )	-	0	-
9.1 d) ii)(Ageing in air oven - Sheath : elongation at break)	-	0	-
9.1 d) ii)(Ageing in air oven - Sheath : elongation variation at break)	-	0	-
9.1 d) iii )(Loss of mass test - insulation )	-	0	-
9.1 d) iii )(Loss of mass test - Sheath )	-	0	-
9.1 d) iv )(Hot deformation - insulation )	-	0	-
9.1 d) iv )(Hot deformation - sheath )	-	0	-
9.1 d) v )(Heat shock - insulation )	-	0	-
9.1 d) v )(Heat shock - Sheath )	-	0	-
9.1 d) vi )(Shrinkage - insulation )	-	0	-
9.1 d) vi )(Shrinkage : Crack observed - insulation )	-	0	-
9.1 d) vi )(Shrinkage - Sheath )	-	0	-
9.1 d) vi )(Shrinkage: Crack observed - Sheath )	-	0	-
10.2(Voltage test )	-	0	-
9.1 f)(Insulation resistance test: Volume resistivity )	-	0	-
9.1 f)(Insulation resistance test : IR constant)	-	0	-
10.4(Flammability Test )	-	0	-
11.1(Manufacturer’s Identification)	-	0	-
11.2(Cable Code)	-	0	-
12.1(packing )	-	0	-
12.2(Marking )	-	0	-
12.2.1(Standard marks )	-	0	-
3.1(Conductor : Material -IS : 8130-2013)	-	0	-
4.1(Insulation : Material -IS : 5831-1984)	-	0	-
5.1(Sheath : materail IS : 5831-1984)	-	0	-
6.1(Conductor : Construction IS : 8130-2013)	-	0	-
7.1(Insulation : Application )	-	0	-
7.2(Thickness of Insulation - average )	-	0	-
7.2(Thickness of Insulation - Min. )	-	0	-
7.3(Colour of Insulation)	-	0	-
9.1 a)(Annealing test)	-	0	-
9.1 b)(Conductor resistance test)	-	0	-
8.1, 9.1 (c)(Nominal radial thickness of sheath)	-	0	-
8.2(Thickness of Sheath)	-	0	-
8.2(Thickness of Sheath - min.)	-	0	-
9.1 d) i)(Insulation : Tensile strength)	-	0	-
9.1 d) i)(Insulation : elongation at break)	-	0	-
9.1 d) i)(Sheath : Tensile strength)	-	0	-
9.1 d) i)(Sheath : elongation at break)	-	0	-
9.1 d) ii)(Ageing in air oven - Insulation : Tensile strength)	-	0	-
9.1 d) ii)(Ageing in air oven - Insulation : Tensile strength Variation)	-	0	-
9.1 d) ii)(Ageing in air oven - Insulation : elongation at break)	-	0	-
9.1 d) ii)(Ageing in air oven - Insulation : elongation variation at break)	-	0	-
9.1 d) ii)(Ageing in air oven - Sheath : Tensile strength)	-	0	-
9.1 d) ii)(Ageing in air oven - Sheath : Tensile strength variation )	-	0	-
9.1 d) ii)(Ageing in air oven - Sheath : elongation at break)	-	0	-
9.1 d) ii)(Ageing in air oven - Sheath : elongation variation at break)	-	0	-
9.1 d) iii )(Loss of mass test - insulation )	-	0	-
9.1 d) iii )(Loss of mass test - Sheath )	-	0	-
9.1 d) iv )(Hot deformation - insulation )	-	0	-
9.1 d) iv )(Hot deformation - sheath )	-	0	-
9.1 d) v )(Heat shock - insulation )	-	0	-
9.1 d) v )(Heat shock - Sheath )	-	0	-
9.1 d) vi )(Shrinkage - insulation )	-	0	-
9.1 d) vi )(Shrinkage : Crack observed - insulation )	-	0	-
9.1 d) vi )(Shrinkage - Sheath )	-	0	-
9.1 d) vi )(Shrinkage: Crack observed - Sheath )	-	0	-
10.2(Voltage test )	-	0	-
9.1 f)(Insulation resistance test: Volume resistivity )	-	0	-
9.1 f)(Insulation resistance test : IR constant)	-	0	-
10.4(Flammability Test )	-	0	-
11.1(Manufacturer’s Identification)	-	0	-
11.2(Cable Code)	-	0	-
12.1(packing )	-	0	-
12.2(Marking )	-	0	-
12.2.1(Standard marks )	-	0	-
3.1(Conductor : Material -IS : 8130-2013)	-	0	-
4.1(Insulation : Material -IS : 5831-1984)	-	0	-
5.1(Sheath : materail IS : 5831-1984)	-	0	-
6.1(Conductor : Construction IS : 8130-2013)	-	0	-
7.1(Insulation : Application )	-	0	-
7.2(Thickness of Insulation - average )	-	0	-
7.2(Thickness of Insulation - Min. )	-	0	-
7.3(Colour of Insulation)	-	0	-
9.1 a)(Annealing test)	-	0	-
9.1 b)(Conductor resistance test)	-	0	-
8.1, 9.1 (c)(Nominal radial thickness of sheath)	-	0	-
8.2(Thickness of Sheath)	-	0	-
8.2(Thickness of Sheath - min.)	-	0	-
9.1 d) i)(Insulation : Tensile strength)	-	0	-
9.1 d) i)(Insulation : elongation at break)	-	0	-
9.1 d) i)(Sheath : Tensile strength)	-	0	-
9.1 d) i)(Sheath : elongation at break)	-	0	-
9.1 d) ii)(Ageing in air oven - Insulation : Tensile strength)	-	0	-
9.1 d) ii)(Ageing in air oven - Insulation : Tensile strength Variation)	-	0	-
9.1 d) ii)(Ageing in air oven - Insulation : elongation at break)	-	0	-
9.1 d) ii)(Ageing in air oven - Insulation : elongation variation at break)	-	0	-
9.1 d) ii)(Ageing in air oven - Sheath : Tensile strength)	-	0	-
9.1 d) ii)(Ageing in air oven - Sheath : Tensile strength variation )	-	0	-
9.1 d) ii)(Ageing in air oven - Sheath : elongation at break)	-	0	-
9.1 d) ii)(Ageing in air oven - Sheath : elongation variation at break)	-	0	-
9.1 d) iii )(Loss of mass test - insulation )	-	0	-
9.1 d) iii )(Loss of mass test - Sheath )	-	0	-
9.1 d) iv )(Hot deformation - insulation )	-	0	-
9.1 d) iv )(Hot deformation - sheath )	-	0	-
9.1 d) v )(Heat shock - insulation )	-	0	-
9.1 d) v )(Heat shock - Sheath )	-	0	-
9.1 d) vi )(Shrinkage - insulation )	-	0	-
9.1 d) vi )(Shrinkage : Crack observed - insulation )	-	0	-
9.1 d) vi )(Shrinkage - Sheath )	-	0	-
9.1 d) vi )(Shrinkage: Crack observed - Sheath )	-	0	-
10.2(Voltage test )	-	0	-
9.1 f)(Insulation resistance test: Volume resistivity )	-	0	-
9.1 f)(Insulation resistance test : IR constant)	-	0	-
10.4(Flammability Test )	-	0	-
11.1(Manufacturer’s Identification)	-	0	-
11.2(Cable Code)	-	0	-
12.1(packing )	-	0	-
12.2(Marking )	-	0	-
12.2.1(Standard marks )	-	0	-
3.1(Conductor : Material -IS : 8130-2013)	-	0	-
4.1(Insulation : Material -IS : 5831-1984)	-	0	-
5.1(Sheath : materail IS : 5831-1984)	-	0	-
6.1(Conductor : Construction IS : 8130-2013)	-	0	-
7.1(Insulation : Application )	-	0	-
7.2(Thickness of Insulation - average )	-	0	-
7.2(Thickness of Insulation - Min. )	-	0	-
7.3(Colour of Insulation)	-	0	-
9.1 a)(Annealing test)	-	0	-
9.1 b)(Conductor resistance test)	-	0	-
8.1, 9.1 (c)(Nominal radial thickness of sheath)	-	0	-
8.2(Thickness of Sheath)	-	0	-
8.2(Thickness of Sheath - min.)	-	0	-
9.1 d) i)(Insulation : Tensile strength)	-	0	-
9.1 d) i)(Insulation : elongation at break)	-	0	-
9.1 d) i)(Sheath : Tensile strength)	-	0	-
9.1 d) i)(Sheath : elongation at break)	-	0	-
9.1 d) ii)(Ageing in air oven - Insulation : Tensile strength)	-	0	-
9.1 d) ii)(Ageing in air oven - Insulation : Tensile strength Variation)	-	0	-
9.1 d) ii)(Ageing in air oven - Insulation : elongation at break)	-	0	-
9.1 d) ii)(Ageing in air oven - Insulation : elongation variation at break)	-	0	-
9.1 d) ii)(Ageing in air oven - Sheath : Tensile strength)	-	0	-
9.1 d) ii)(Ageing in air oven - Sheath : Tensile strength variation )	-	0	-
9.1 d) ii)(Ageing in air oven - Sheath : elongation at break)	-	0	-
9.1 d) ii)(Ageing in air oven - Sheath : elongation variation at break)	-	0	-
9.1 d) iii )(Loss of mass test - insulation )	-	0	-
9.1 d) iii )(Loss of mass test - Sheath )	-	0	-
9.1 d) iv )(Hot deformation - insulation )	-	0	-
9.1 d) iv )(Hot deformation - sheath )	-	0	-
9.1 d) v )(Heat shock - insulation )	-	0	-
9.1 d) v )(Heat shock - Sheath )	-	0	-
9.1 d) vi )(Shrinkage - insulation )	-	0	-
9.1 d) vi )(Shrinkage : Crack observed - insulation )	-	0	-
9.1 d) vi )(Shrinkage - Sheath )	-	0	-
9.1 d) vi )(Shrinkage: Crack observed - Sheath )	-	0	-
10.2(Voltage test )	-	0	-
9.1 f)(Insulation resistance test: Volume resistivity )	-	0	-
9.1 f)(Insulation resistance test : IR constant)	-	0	-
10.4(Flammability Test )	-	0	-
11.1(Manufacturer’s Identification)	-	0	-
11.2(Cable Code)	-	0	-
12.1(packing )	-	0	-
12.2(Marking )	-	0	-
12.2.1(Standard marks )	-	0	-
3.1(Conductor : Material -IS : 8130-2013)	-	0	-
4.1(Insulation : Material -IS : 5831-1984)	-	0	-
5.1(Sheath : materail IS : 5831-1984)	-	0	-
6.1(Conductor : Construction IS : 8130-2013)	-	0	-
7.1(Insulation : Application )	-	0	-
7.2(Thickness of Insulation - average )	-	0	-
7.2(Thickness of Insulation - Min. )	-	0	-
7.3(Colour of Insulation)	-	0	-
9.1 a)(Annealing test)	-	0	-
9.1 b)(Conductor resistance test)	-	0	-
8.1, 9.1 (c)(Nominal radial thickness of sheath)	-	0	-
8.2(Thickness of Sheath)	-	0	-
8.2(Thickness of Sheath - min.)	-	0	-
9.1 d) i)(Insulation : Tensile strength)	-	0	-
9.1 d) i)(Insulation : elongation at break)	-	0	-
9.1 d) i)(Sheath : Tensile strength)	-	0	-
9.1 d) i)(Sheath : elongation at break)	-	0	-
9.1 d) ii)(Ageing in air oven - Insulation : Tensile strength)	-	0	-
9.1 d) ii)(Ageing in air oven - Insulation : Tensile strength Variation)	-	0	-
9.1 d) ii)(Ageing in air oven - Insulation : elongation at break)	-	0	-
9.1 d) ii)(Ageing in air oven - Insulation : elongation variation at break)	-	0	-
9.1 d) ii)(Ageing in air oven - Sheath : Tensile strength)	-	0	-
9.1 d) ii)(Ageing in air oven - Sheath : Tensile strength variation )	-	0	-
9.1 d) ii)(Ageing in air oven - Sheath : elongation at break)	-	0	-
9.1 d) ii)(Ageing in air oven - Sheath : elongation variation at break)	-	0	-
9.1 d) iii )(Loss of mass test - insulation )	-	0	-
9.1 d) iii )(Loss of mass test - Sheath )	-	0	-
9.1 d) iv )(Hot deformation - insulation )	-	0	-
9.1 d) iv )(Hot deformation - sheath )	-	0	-
9.1 d) v )(Heat shock - insulation )	-	0	-
9.1 d) v )(Heat shock - Sheath )	-	0	-
9.1 d) vi )(Shrinkage - insulation )	-	0	-
9.1 d) vi )(Shrinkage : Crack observed - insulation )	-	0	-
9.1 d) vi )(Shrinkage - Sheath )	-	0	-
9.1 d) vi )(Shrinkage: Crack observed - Sheath )	-	0	-
10.2(Voltage test )	-	0	-
9.1 f)(Insulation resistance test: Volume resistivity )	-	0	-
9.1 f)(Insulation resistance test : IR constant)	-	0	-
10.4(Flammability Test )	-	0	-
11.1(Manufacturer’s Identification)	-	0	-
11.2(Cable Code)	-	0	-
12.1(packing )	-	0	-
12.2(Marking )	-	0	-
12.2.1(Standard marks )	-	0	-
3.1(Conductor : Material -IS : 8130-2013)	-	0	-
4.1(Insulation : Material -IS : 5831-1984)	-	0	-
5.1(Sheath : materail IS : 5831-1984)	-	0	-
6.1(Conductor : Construction IS : 8130-2013)	-	0	-
7.1(Insulation : Application )	-	0	-
7.2(Thickness of Insulation - average )	-	0	-
7.2(Thickness of Insulation - Min. )	-	0	-
7.3(Colour of Insulation)	-	0	-
9.1 a)(Annealing test)	-	0	-
9.1 b)(Conductor resistance test)	-	0	-
8.1, 9.1 (c)(Nominal radial thickness of sheath)	-	0	-
8.2(Thickness of Sheath)	-	0	-
8.2(Thickness of Sheath - min.)	-	0	-
9.1 d) i)(Insulation : Tensile strength)	-	0	-
9.1 d) i)(Insulation : elongation at break)	-	0	-
9.1 d) i)(Sheath : Tensile strength)	-	0	-
9.1 d) i)(Sheath : elongation at break)	-	0	-
9.1 d) ii)(Ageing in air oven - Insulation : Tensile strength)	-	0	-
9.1 d) ii)(Ageing in air oven - Insulation : Tensile strength Variation)	-	0	-
9.1 d) ii)(Ageing in air oven - Insulation : elongation at break)	-	0	-
9.1 d) ii)(Ageing in air oven - Insulation : elongation variation at break)	-	0	-
9.1 d) ii)(Ageing in air oven - Sheath : Tensile strength)	-	0	-
9.1 d) ii)(Ageing in air oven - Sheath : Tensile strength variation )	-	0	-
9.1 d) ii)(Ageing in air oven - Sheath : elongation at break)	-	0	-
9.1 d) ii)(Ageing in air oven - Sheath : elongation variation at break)	-	0	-
9.1 d) iii )(Loss of mass test - insulation )	-	0	-
9.1 d) iii )(Loss of mass test - Sheath )	-	0	-
9.1 d) iv )(Hot deformation - insulation )	-	0	-
9.1 d) iv )(Hot deformation - sheath )	-	0	-
9.1 d) v )(Heat shock - insulation )	-	0	-
9.1 d) v )(Heat shock - Sheath )	-	0	-
9.1 d) vi )(Shrinkage - insulation )	-	0	-
9.1 d) vi )(Shrinkage : Crack observed - insulation )	-	0	-
9.1 d) vi )(Shrinkage - Sheath )	-	0	-
9.1 d) vi )(Shrinkage: Crack observed - Sheath )	-	0	-
10.2(Voltage test )	-	0	-
9.1 f)(Insulation resistance test: Volume resistivity )	-	0	-
9.1 f)(Insulation resistance test : IR constant)	-	0	-
10.4(Flammability Test )	-	0	-
11.1(Manufacturer’s Identification)	-	0	-
11.2(Cable Code)	-	0	-
12.1(packing )	-	0	-
12.2(Marking )	-	0	-
12.2.1(Standard marks )	-	0	-
3.1(Conductor : Material -IS : 8130-2013)	-	0	-
4.1(Insulation : Material -IS : 5831-1984)	-	0	-
5.1(Sheath : materail IS : 5831-1984)	-	0	-
6.1(Conductor : Construction IS : 8130-2013)	-	0	-
7.1(Insulation : Application )	-	0	-
7.2(Thickness of Insulation - average )	-	0	-
7.2(Thickness of Insulation - Min. )	-	0	-
7.3(Colour of Insulation)	-	0	-
9.1 a)(Annealing test)	-	0	-
9.1 b)(Conductor resistance test)	-	0	-
8.1, 9.1 (c)(Nominal radial thickness of sheath)	-	0	-
8.2(Thickness of Sheath)	-	0	-
8.2(Thickness of Sheath - min.)	-	0	-
9.1 d) i)(Insulation : Tensile strength)	-	0	-
9.1 d) i)(Insulation : elongation at break)	-	0	-
9.1 d) i)(Sheath : Tensile strength)	-	0	-
9.1 d) i)(Sheath : elongation at break)	-	0	-
9.1 d) ii)(Ageing in air oven - Insulation : Tensile strength)	-	0	-
9.1 d) ii)(Ageing in air oven - Insulation : Tensile strength Variation)	-	0	-
9.1 d) ii)(Ageing in air oven - Insulation : elongation at break)	-	0	-
9.1 d) ii)(Ageing in air oven - Insulation : elongation variation at break)	-	0	-
9.1 d) ii)(Ageing in air oven - Sheath : Tensile strength)	-	0	-
9.1 d) ii)(Ageing in air oven - Sheath : Tensile strength variation )	-	0	-
9.1 d) ii)(Ageing in air oven - Sheath : elongation at break)	-	0	-
9.1 d) ii)(Ageing in air oven - Sheath : elongation variation at break)	-	0	-
9.1 d) iii )(Loss of mass test - insulation )	-	0	-
9.1 d) iii )(Loss of mass test - Sheath )	-	0	-
9.1 d) iv )(Hot deformation - insulation )	-	0	-
9.1 d) iv )(Hot deformation - sheath )	-	0	-
9.1 d) v )(Heat shock - insulation )	-	0	-
9.1 d) v )(Heat shock - Sheath )	-	0	-
9.1 d) vi )(Shrinkage - insulation )	-	0	-
9.1 d) vi )(Shrinkage : Crack observed - insulation )	-	0	-
9.1 d) vi )(Shrinkage - Sheath )	-	0	-
9.1 d) vi )(Shrinkage: Crack observed - Sheath )	-	0	-
10.2(Voltage test )	-	0	-
9.1 f)(Insulation resistance test: Volume resistivity )	-	0	-
9.1 f)(Insulation resistance test : IR constant)	-	0	-
10.4(Flammability Test )	-	0	-
11.1(Manufacturer’s Identification)	-	0	-
11.2(Cable Code)	-	0	-
12.1(packing )	-	0	-
12.2(Marking )	-	0	-
12.2.1(Standard marks )	-	0	-

11 Apr, 2028

-
Included w.e.f. 08-08-2022.

8579

POWERONIC TEST & RESEARCH CENTRE PRIVATE LIMITED

8170206

IS 9537 : Part 3 (1983)

Specification for conduits for electrical installations: Part 3 rigid plain conduits of insulating meterials

Conduits for electrical installations: Part 3 Rigid pla

4350 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1(Marking)	-	0	10 % Discount to BIS
6.2(Durability of Marking as per 6.4 of IS: 9537 (Part 1)-1980)	-	200	10 % Discount to BIS
6.3(Standard Mark on Conduit)	-	0	10 % Discount to BIS
7.1.1(Maximum and minimum outside diameter of socket)	-	100	10 % Discount to BIS
7.1.1 Table-2(Length of Socket end)	-	100	10 % Discount to BIS
7.2(Minimum inside diameter of conduit)	-	100	10 % Discount to BIS
7.4(Unifomity of The wall Thickness)	-	100	10 % Discount to BIS
8.1(Construction as per clause 8 of IS: 9537 (Part 1)-1980)	-	0	10 % Discount to BIS
9.2(Bending Test i) At Room Temp ii) At Low Temp (-5 ±2°C))	-	500	10 % Discount to BIS
9.3(Compression Test as per caluse 9.3 of IS: 9537 (Part 1)-1980)	-	500	10 % Discount to BIS
9.4(Impact Test as per clause 9.4 of IS: 9537 (Part 1)-1980)	-	1000	10 % Discount to BIS
9.5(Collapse Test as per clause 9.5 of IS: 9537 (Part 1)-1980)	-	500	10 % Discount to BIS
10(Resistance to Heat -Ball presure test)	-	750	10 % Discount to BIS
11(Resistance to burning as per clause 11 of IS: 9537 (Part 1)-1980)	-	500	10 % Discount to BIS
6.1(Marking)	-	0	-
6.2(Durability of Marking as per 6.4 of IS: 9537 (Part 1)-1980)	-	0	-
6.3(Standard Mark on Conduit)	-	0	-
7.1.1(Maximum and minimum outside diameter of socket)	-	0	-
7.1.1 Table-2(Length of Socket end)	-	0	-
7.2(Minimum inside diameter of conduit)	-	0	-
7.4(Unifomity of The wall Thickness)	-	0	-
8.1(Construction as per clause 8 of IS: 9537 (Part 1)-1980)	-	0	-
9.2(Bending Test i) At Room Temp ii) At Low Temp (-5 ±2°C))	-	0	-
9.3(Compression Test as per caluse 9.3 of IS: 9537 (Part 1)-1980)	-	0	-
9.4(Impact Test as per clause 9.4 of IS: 9537 (Part 1)-1980)	-	0	-
9.5(Collapse Test as per clause 9.5 of IS: 9537 (Part 1)-1980)	-	0	-
10(Resistance to Heat -Ball presure test)	-	0	-
11(Resistance to burning as per clause 11 of IS: 9537 (Part 1)-1980)	-	0	-
6.1(Marking)	-	0	-
6.2(Durability of Marking as per 6.4 of IS: 9537 (Part 1)-1980)	-	0	-
6.3(Standard Mark on Conduit)	-	0	-
7.1.1(Maximum and minimum outside diameter of socket)	-	0	-
7.1.1 Table-2(Length of Socket end)	-	0	-
7.2(Minimum inside diameter of conduit)	-	0	-
7.4(Unifomity of The wall Thickness)	-	0	-
8.1(Construction as per clause 8 of IS: 9537 (Part 1)-1980)	-	0	-
9.2(Bending Test i) At Room Temp ii) At Low Temp (-5 ±2°C))	-	0	-
9.3(Compression Test as per caluse 9.3 of IS: 9537 (Part 1)-1980)	-	0	-
9.4(Impact Test as per clause 9.4 of IS: 9537 (Part 1)-1980)	-	0	-
9.5(Collapse Test as per clause 9.5 of IS: 9537 (Part 1)-1980)	-	0	-
10(Resistance to Heat -Ball presure test)	-	0	-
11(Resistance to burning as per clause 11 of IS: 9537 (Part 1)-1980)	-	0	-
6.1(Marking)	-	0	-
6.2(Durability of Marking as per 6.4 of IS: 9537 (Part 1)-1980)	-	0	-
6.3(Standard Mark on Conduit)	-	0	-
7.1.1(Maximum and minimum outside diameter of socket)	-	0	-
7.1.1 Table-2(Length of Socket end)	-	0	-
7.2(Minimum inside diameter of conduit)	-	0	-
7.4(Unifomity of The wall Thickness)	-	0	-
8.1(Construction as per clause 8 of IS: 9537 (Part 1)-1980)	-	0	-
9.2(Bending Test i) At Room Temp ii) At Low Temp (-5 ±2°C))	-	0	-
9.3(Compression Test as per caluse 9.3 of IS: 9537 (Part 1)-1980)	-	0	-
9.4(Impact Test as per clause 9.4 of IS: 9537 (Part 1)-1980)	-	0	-
9.5(Collapse Test as per clause 9.5 of IS: 9537 (Part 1)-1980)	-	0	-
10(Resistance to Heat -Ball presure test)	-	0	-
11(Resistance to burning as per clause 11 of IS: 9537 (Part 1)-1980)	-	0	-
6.1(Marking)	-	0	-
6.2(Durability of Marking as per 6.4 of IS: 9537 (Part 1)-1980)	-	0	-
6.3(Standard Mark on Conduit)	-	0	-
7.1.1(Maximum and minimum outside diameter of socket)	-	0	-
7.1.1 Table-2(Length of Socket end)	-	0	-
7.2(Minimum inside diameter of conduit)	-	0	-
7.4(Unifomity of The wall Thickness)	-	0	-
8.1(Construction as per clause 8 of IS: 9537 (Part 1)-1980)	-	0	-
9.2(Bending Test i) At Room Temp ii) At Low Temp (-5 ±2°C))	-	0	-
9.3(Compression Test as per caluse 9.3 of IS: 9537 (Part 1)-1980)	-	0	-
9.4(Impact Test as per clause 9.4 of IS: 9537 (Part 1)-1980)	-	0	-
9.5(Collapse Test as per clause 9.5 of IS: 9537 (Part 1)-1980)	-	0	-
10(Resistance to Heat -Ball presure test)	-	0	-
11(Resistance to burning as per clause 11 of IS: 9537 (Part 1)-1980)	-	0	-
6.1(Marking)	-	0	-
6.2(Durability of Marking as per 6.4 of IS: 9537 (Part 1)-1980)	-	0	-
6.3(Standard Mark on Conduit)	-	0	-
7.1.1(Maximum and minimum outside diameter of socket)	-	0	-
7.1.1 Table-2(Length of Socket end)	-	0	-
7.2(Minimum inside diameter of conduit)	-	0	-
7.4(Unifomity of The wall Thickness)	-	0	-
8.1(Construction as per clause 8 of IS: 9537 (Part 1)-1980)	-	0	-
9.2(Bending Test i) At Room Temp ii) At Low Temp (-5 ±2°C))	-	0	-
9.3(Compression Test as per caluse 9.3 of IS: 9537 (Part 1)-1980)	-	0	-
9.4(Impact Test as per clause 9.4 of IS: 9537 (Part 1)-1980)	-	0	-
9.5(Collapse Test as per clause 9.5 of IS: 9537 (Part 1)-1980)	-	0	-
10(Resistance to Heat -Ball presure test)	-	0	-
11(Resistance to burning as per clause 11 of IS: 9537 (Part 1)-1980)	-	0	-
6.1(Marking)	-	0	-
6.2(Durability of Marking as per 6.4 of IS: 9537 (Part 1)-1980)	-	0	-
6.3(Standard Mark on Conduit)	-	0	-
7.1.1(Maximum and minimum outside diameter of socket)	-	0	-
7.1.1 Table-2(Length of Socket end)	-	0	-
7.2(Minimum inside diameter of conduit)	-	0	-
7.4(Unifomity of The wall Thickness)	-	0	-
8.1(Construction as per clause 8 of IS: 9537 (Part 1)-1980)	-	0	-
9.2(Bending Test i) At Room Temp ii) At Low Temp (-5 ±2°C))	-	0	-
9.3(Compression Test as per caluse 9.3 of IS: 9537 (Part 1)-1980)	-	0	-
9.4(Impact Test as per clause 9.4 of IS: 9537 (Part 1)-1980)	-	0	-
9.5(Collapse Test as per clause 9.5 of IS: 9537 (Part 1)-1980)	-	0	-
10(Resistance to Heat -Ball presure test)	-	0	-
11(Resistance to burning as per clause 11 of IS: 9537 (Part 1)-1980)	-	0	-

11 Apr, 2028

-
Included w.e.f. 08-08-2022.

8580

POWERONIC TEST & RESEARCH CENTRE PRIVATE LIMITED

8170206

IS 996 (2009)

Single phase a.c. induction motors for general purpose (Third Revision)

Single phase a.c. induction motors for general purpose

8500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
16.1(Marking and Diagram of connenctions)	-	100	10 % Discount to BIS
10(Type of enclosures)	-	100	10 % Discount to BIS
9.1(General construction (as per Cl. 9 & F-3))	-	100	10 % Discount to BIS
4.1(Rated Voltage)	-	0	10 % Discount to BIS
4.3(Rated Output)	-	0	10 % Discount to BIS
4.4(Rated Speed)	-	0	10 % Discount to BIS
7(Dimensions (Cl.App.F-4))	-	150	10 % Discount to BIS
9.5(Earthing)	-	250	10 % Discount to BIS
17.3 (a)(No load test at rated voltage and frequency )	-	500	10 % Discount to BIS
12.1.1(Test for torques at rated voltage and frequency (Cl.12.1.1 & F-6.2 ))	-	500	10 % Discount to BIS
16.1(Marking and Diagram of connenctions)	-	0	10 % Discount to BIS
10(Type of enclosures)	-	0	10 % Discount to BIS
9.1(General construction (as per Cl. 9 & F-3))	-	0	10 % Discount to BIS
4.1(Rated Voltage)	-	0	10 % Discount to BIS
4.3(Rated Output)	-	0	10 % Discount to BIS
4.4(Rated Speed)	-	0	10 % Discount to BIS
7(Dimensions (Cl.App.F-4))	-	0	10 % Discount to BIS
9.5(Earthing)	-	0	10 % Discount to BIS
17.3 (a)(No load test at rated voltage and frequency )	-	0	10 % Discount to BIS
12.1.1(Test for torques at rated voltage and frequency (Cl.12.1.1 & F-6.2 ))	-	0	10 % Discount to BIS
12.1.1(Test for Breakaway starting current at rated voltage and frequency (Cl.12.1.1 & Cl. 12.5))	-	250	10 % Discount to BIS
12.5.1(Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-	250	10 % Discount to BIS
12.2(Temperature-rise test (Cl.12.2 & Cl.F-6.2.5))	-	3000	10 % Discount to BIS
13.1(High voltage test)	-	1000	10 % Discount to BIS
13.2(Moisture proofness)	-	100	10 % Discount to BIS
13.3(Leakage current test)	-	500	10 % Discount to BIS
12.6(Vibration Severity)	-	200	10 % Discount to BIS
15.1(ADDITIONAL TESTS (For ECO - MARK))	-	0	10 % Discount to BIS
15.1.5(Noise Level)	-	750	10 % Discount to BIS
17.3 (g)(Insulation Resistance)	-	750	10 % Discount to BIS
16.1(Marking and Diagram of connenctions)	-	0	-
10(Type of enclosures)	-	0	-
9.1(General construction (as per Cl. 9 & F-3))	-	0	-
4.1(Rated Voltage)	-	0	-
4.3(Rated Output)	-	0	-
4.4(Rated Speed)	-	0	-
7(Dimensions (Cl.App.F-4))	-	0	-
9.5(Earthing)	-	0	-
17.3 (a)(No load test at rated voltage and frequency )	-	0	-
12.1.1(Test for torques at rated voltage and frequency (Cl.12.1.1 & F-6.2 ))	-	0	-
12.1.1(Test for Breakaway starting current at rated voltage and frequency (Cl.12.1.1 & Cl. 12.5))	-	0	-
12.5.1(Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-	0	-
12.2(Temperature-rise test (Cl.12.2 & Cl.F-6.2.5))	-	0	-
13.1(High voltage test)	-	0	-
13.2(Moisture proofness)	-	0	-
13.3(Leakage current test)	-	0	-
12.6(Vibration Severity)	-	0	-
15.1(ADDITIONAL TESTS (For ECO - MARK))	-	0	-
17.3 (g)(Insulation Resistance)	-	0	-
9(General construction (as per Cl. 9 & F-3))	-	0	-
9.4.13(General construction (as per Cl. 9 & F-3))	-	0	-
12.7(Insulation resistance test)	-	0	-
15.1.5(Noise Level)	-	0	-
16.1(Marking and Diagram of connenctions)	-	0	-
10(Type of enclosures)	-	0	-
9.1(General construction (as per Cl. 9 & F-3))	-	0	-
4.1(Rated Voltage)	-	0	-
4.3(Rated Output)	-	0	-
4.4(Rated Speed)	-	0	-
7(Dimensions (Cl.App.F-4))	-	0	-
9.5(Earthing)	-	0	-
17.3 (a)(No load test at rated voltage and frequency )	-	0	-
12.1.1(Test for torques at rated voltage and frequency (Cl.12.1.1 & F-6.2 ))	-	0	-
12.1.1(Test for Breakaway starting current at rated voltage and frequency (Cl.12.1.1 & Cl. 12.5))	-	0	-
12.5.1(Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-	0	-
12.2(Temperature-rise test (Cl.12.2 & Cl.F-6.2.5))	-	0	-
13.1(High voltage test)	-	0	-
13.2(Moisture proofness)	-	0	-
13.3(Leakage current test)	-	0	-
12.6(Vibration Severity)	-	0	-
15.1(ADDITIONAL TESTS (For ECO - MARK))	-	0	-
17.3 (g)(Insulation Resistance)	-	0	-
9(General construction (as per Cl. 9 & F-3))	-	0	-
9.4.13(General construction (as per Cl. 9 & F-3))	-	0	-
12.7(Insulation resistance test)	-	0	-
15.1.5(Noise Level)	-	0	-

11 Apr, 2028

-
Included w.e.f. 08-08-2022.

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number