| 8971 |
BIS, Eastern Regional Laboratory (ERL)
| None
| IS 7904 (2018) |
High carbon steel wire rods - Specification (Second Revision) |
- |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Table-1,(Clauses 5.1 and 7.2) (Carbon) |
- |
|
|
|
| Table-1,(Clauses 5.1 and 7.2) (Sulphor) |
- |
|
|
|
| Table-1,(Clauses 5.1 and 7.2) (Phosphorous) |
- |
|
|
|
| Table-1,(Clauses 5.1 and 7.2) (Manganese) |
- |
|
|
|
| Table-1,(Clauses 5.1 and 7.2) (Silicon) |
- |
|
|
|
| Table-1,(Clauses 5.1 and 7.2) (Chromium) |
- |
|
|
|
| Table-1,(Clauses 5.1 and 7.2) (Nickel) |
- |
|
|
|
| Table-1,(Clauses 5.1 and 7.2) (Molybdenum) |
- |
|
|
|
| Table-1,(Clauses 5.1 and 7.2) (Copper) |
- |
|
|
|
| Table-1,(Clauses 5.1 and 7.2) (Nitrogen) |
- |
|
|
|
| Table-1,(Clauses 5.1 and 7.2) (S+P) |
- |
|
|
|
| Cl 9 (Dimensions & tolerances) () |
- |
|
|
|
| Table-1,(Clauses 5.1 and 7.2) (Aluminium) |
- |
|
|
|
| 10 (Mechanical Properties (Tensile strength)) |
- |
|
|
|
| 10 (Mechanical Properties (Reduction in Area)) |
- |
|
|
|
| 12 (Surface Defects) |
- |
|
|
|
| 13 (Decarburization Test) |
- |
|
|
|
| 14 (Non-metallic Inclusions (Type A (Sulphide Type) (Thin, worse)) |
- |
|
|
|
| 14 (Type B (Alumina Type) (Thin, worse)) |
- |
|
|
|
|
- |
-
Except Cl.5.1 V, Nb, Ti, B, Al |
| 8972 |
BIS, Eastern Regional Laboratory (ERL)
| None
| IS 1239 : Part 1 (2004) |
Steel Tubes, Tubulars and Other Wrought Steel Fittings : Part 1 Steel Tubes (BI-LINGUAL) |
For all nominal bore and class |
Rs. 9200/ View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 6.2 AND AS PER IS 513 (CARBON) |
- |
|
|
|
| 6.2 AND AS PER IS 10748 (SULPHUR) |
- |
|
|
|
| 6.2 AND AS PER IS 10748 (PHOSPHORUS) |
- |
|
|
|
| 6.2 AND AS PER IS 10748 (MANGANESE) |
- |
|
|
|
|
- |
-
Facility not available for Al,B,Nb,V,Ti,Ca, Hydrostatic test and thread gauges
Sample required- 1m x1 No + 1.8 m pc for bend test up to 50 mm NB + 50 g drilling + 4 pcsx10 cm |
| 8973 |
BIS, Eastern Regional Laboratory (ERL)
| None
| IS 8931 (1993) |
copper alloy fancy single taps, combination tap assembly and stop valves for water services |
- |
Rs 3600/ View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl 4 (NOMINAL SIZES) |
- |
|
|
|
| Cl 6.7 (Waterway) |
- |
|
|
|
| Cl 6.9 (Body Seat) |
- |
|
|
|
| Cl 6.10 (Bonnet assembly) |
- |
|
|
|
| Cl 6.11 (Gland Packaging) |
- |
|
|
|
| Cl 6.12 (Flanges) |
- |
|
|
|
| Cl 6.13 (Knob) |
- |
|
|
|
| Cl 7.1 (Thickness) |
- |
|
|
|
| Cl 7.2 (Body) |
- |
|
|
|
| Cl 7.3 (Bonnet Assembly) |
- |
|
|
|
| Cl 7.3.3 (Washer Plate) |
- |
|
|
|
| Cl 7.3 (Bonnet Assembly) |
- |
|
|
|
| Cl 8 (Finish) |
- |
|
|
|
|
- |
-
Except critical dimension and performance requirement |
| 8974 |
BIS, Eastern Regional Laboratory (ERL)
| None
| IS 733 (1983) |
Specification for wrought aluminium and aluminium alloy bars, rods and sections (For General Engineering Purposes) (Third Revision) |
For all grades except for the tests mentioned in remarks |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl. 4 (Freedom from Defects) |
- |
|
|
|
| Cl. 5.1, Table 2 (0.2 Percent proof stress- IS 1816) |
- |
|
|
|
| Cl. 5.1, Table 2 (Tensile Strength- IS 1816) |
- |
|
|
|
| Cl. 5.1, Table 2 (Elongation on 50 mm or 5.65√So Gauge Length) |
- |
|
|
|
| Cl. 0.4, 5.1, Table 1 (Copper- IS 504 or by any other suitable instrumental method) |
- |
|
|
|
| Cl. 0.4, 5.1, Table 1 (Magnesium- IS 504 or by any other suitable instrumental method) |
- |
|
|
|
| Cl. 0.4, 5.1, Table 1 (Silicon- IS 504 or by any other suitable instrumental method) |
- |
|
|
|
| Cl. 0.4, 5.1, Table 1 (Iron- IS 504 or by any other suitable instrumental method) |
- |
|
|
|
| Cl. 0.4, 5.1, Table 1 (Zinc- IS 504 or by any other suitable instrumental method) |
- |
|
|
|
| Cl. 0.4, 5.1, Table 1 (Chromium- IS 504 or by any other suitable instrumental method) |
- |
|
|
|
| Cl. 0.4, 5.1, Table 1 (Cr+ Mn- IS 504 or by any other suitable instrumental method) |
- |
|
|
|
| Table-1, Clause - 5.1 (Copper) |
- |
|
|
|
| Table-1, Clause - 5.1 (Manganese) |
- |
|
|
|
| Table-1, Clause - 5.1 (Titanium) |
- |
|
|
|
|
- |
-
Except Aluminium, Vanadium |
| 8975 |
Central Power Research Institute (CPRI), Bangalore
| 6101024
| IS 16227 : Part 2 (2016) |
Instrument transformers: Part 2 additional requirements for current transformers |
- |
250000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 7.2.2(Temperature-rise test) |
- |
55250 |
|
Test Charges will vary depending on the rating of the sample
Test charge applicable will be intimated through a proforma invoice |
| 7.2.6.201(Test for ratio error and phase displacement of measuring current
transformers) |
- |
850 |
|
Test Charges will vary depending on the rating of the sample
Test charge applicable will be intimated through a proforma invoice |
| 7.2.6.202(Determination of the instrument security factor (F S) of measuring current
transformers) |
- |
850 |
|
Test Charges will vary depending on the rating of the sample
Test charge applicable will be intimated through a proforma invoice |
| 7.2.6.203(Test for composite error of class P and PR protective current
transformers) |
- |
850 |
|
Test Charges will vary depending on the rating of the sample
Test charge applicable will be intimated through a proforma invoice |
| 7.2.6.204(Test for error at limiting conditions for class TPX, TPY and TPZ protective
current transformers) |
- |
850 |
|
Test Charges will vary depending on the rating of the sample
Test charge applicable will be intimated through a proforma invoice |
| 7.2.6.205(Test of low-leakage reactance type for class PX and PXR protective
current transformers) |
- |
850 |
|
Test Charges will vary depending on the rating of the sample
Test charge applicable will be intimated through a proforma invoice |
| 7.2.6.206(Determination of the remanence factor class PR, TPY, and PXR protective
current transformers) |
- |
850 |
|
Test Charges will vary depending on the rating of the sample
Test charge applicable will be intimated through a proforma invoice |
| 7.2.201(Short-time current tests) |
- |
48500 |
|
Test Charges will vary depending on the rating of the sample
Test charge applicable will be intimated through a proforma invoice |
| 7.2.3(Impulse voltage withstand test on primary terminals) |
- |
17050 |
|
Test Charges will vary depending on the rating of the sample
Test charge applicable will be intimated through a proforma invoice |
| 7.2.5(Electromagnetic Compatibility tests) |
- |
6100 |
|
Test Charges will vary depending on the rating of the sample
Test charge applicable will be intimated through a proforma invoice |
|
31 Dec, 2026 |
-
- |
| 8976 |
BIS, Eastern Regional Laboratory (ERL)
| None
| IS 319 (2007) |
Free cutting brass bars, rods and section - Specification (Fifth Revision) |
- |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 8.1 Table 1 (Cu) |
- |
|
|
|
| 8.1 Table 1 (Pb) |
- |
|
|
|
| 8.1 Table 1 (Fe) |
- |
|
|
|
| 8.1 Table 1 (Zn) |
- |
|
|
|
| 10.1 (Mercurous Nitrate Test) |
- |
|
|
|
| 7.0 (Dimension and Tolerances) |
- |
|
|
|
| 9.1 Table-2 (Tensile Strength) |
- |
|
|
|
| 9.1 Table-2 (Elongation) |
- |
|
|
|
| 9.2 (Vickers Hardness) |
- |
|
|
|
|
- |
-
Excluding Cl.4.3.1 S, C(<0.05%), Mo(>1.5%) |
| 8977 |
Central Power Research Institute (CPRI), Bangalore
| 6101024
| IS/IEC 60898 : PART 1 (2015) |
Electrical accessories - Circuit - Breakers for overcurrent protection for household and similar installations: Part 1 circuit - Breakers for a.c. operation (First Revision) |
- |
1022650 View breakup
Test charges for all sequences combined Rs. 750620/-, Rs. 886600/-, Rs. 1076710/-, Rs. 1176070/- for 1, 2, 3, 4 poles respectively;
Test Sequence (A1+ A2): Test sequence A1 Rs. 14260/-, Rs. 17200/-, Rs. 20140/-, Rs. 23080/- for 1, 2, 3, 4 poles respectively; for A2 Rs. 5980/-;
Test Sequence B: Rs. 253820/-, Rs. 273830/-, Rs. 296930/-, Rs. 334730/- for 1, 2, 3, 4 poles respectively;
Test Sequence C Test Sequence C1 : Rs. 161130/-, Rs. 172680/-, Rs. 237210/-, Rs. 251850/- for 1, 2, 3, 4 poles respectively;
Test Sequence C2 : Rs. 63480/-, Rs. 72300/-, Rs. 124890/-, Rs. 133710/- for 1, 2, 3, 4 poles respectively; Test Sequence D (D0 + D1): Test sequence D0 Rs. 61540/-, Rs. 61540/-, Rs. 61540/-, Rs. 61540/- for 1, 2, 3, 4 poles respectively;
Test sequence D1 Rs. 63480/-, Rs. 79200/-, Rs. 84030/-, Rs. 92820/- for 1, 2, 3, 4 poles respectively; Test Sequence E Test Sequence E1: Rs. 63480/-, Rs. 72300/-, Rs. 84030/-, Rs. 92820 for 1, 2, 3, 4 poles respectively;
Test Sequence E2: Rs. 63480/-, Rs. 79200/-, Rs. 84030/-, Rs. 92820/- for 1, 2, 3, 4 poles respectively; Test Sequence E3: Rs. 63480/-, Rs. 79200/-, Rs. 84030/-, Rs. 92820/- for 1, 2, 3, 4 poles respectively;
Test charges will vary depending on the rating of the sample. The applicable test charges will be intimated through a proforma invoice.
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 6(Marking and other product information, IS 60898-1) |
- |
850 |
|
Test Charges will vary depending on the No of poles, Rating and Marking of the Sample
Test charge applicable will be intimated through a proforma invoice |
| 8.1.1(General, IS 60898-1) |
- |
850 |
|
Test Charges will vary depending on the No of poles, Rating and Marking of the Sample
Test charge applicable will be intimated through a proforma invoice |
| 8.1.2(Mechanism, IS 60898-1) |
- |
3400 |
|
Test Charges will vary depending on the No of poles, Rating and Marking of the Sample
Test charge applicable will be intimated through a proforma invoice |
| 9.3(Test of indelibility of marking, IS 60898-1) |
- |
850 |
|
Test Charges will vary depending on the No of poles, Rating and Marking of the Sample
Test charge applicable will be intimated through a proforma invoice |
| 8.1.3(Clearances and creepage distances, IS 60898-1) |
- |
1450 |
|
Test Charges will vary depending on the No of poles, Rating and Marking of the Sample
Test charge applicable will be intimated through a proforma invoice |
| 8.1.6(Non-interchangeability) |
- |
850 |
|
Test Charges will vary depending on the No of poles, Rating and Marking of the Sample
Test charge applicable will be intimated through a proforma invoice |
| 9.4(Test of reliability of screws, current-carrying parts and connections, IS 60898-1) |
- |
3400 |
|
Test Charges will vary depending on the No of poles, Rating and Marking of the Sample
Test charge applicable will be intimated through a proforma invoice |
| 9.5.1(Tests of reliability of screw-type terminals for external copper conductors, IS 60898-1) |
- |
3400 |
|
Test Charges will vary depending on the No of poles, Rating and Marking of the Sample
Test charge applicable will be intimated through a proforma invoice |
| 9.5.2(Tests of reliability of screw-type terminals for external copper conductors, IS 60898-1) |
- |
3400 |
|
Test Charges will vary depending on the No of poles, Rating and Marking of the Sample
Test charge applicable will be intimated through a proforma invoice |
| 9.5.3(Tests of reliability of screw-type terminals for external copper conductors, IS 60898-1) |
- |
3400 |
|
Test Charges will vary depending on the No of poles, Rating and Marking of the Sample
Test charge applicable will be intimated through a proforma invoice |
| 9.5.4(Tests of reliability of screw-type terminals for external copper conductors, IS 60898-1) |
- |
3400 |
|
Test Charges will vary depending on the No of poles, Rating and Marking of the Sample
Test charge applicable will be intimated through a proforma invoice |
| 9.6(Test of protection against electric shock, IS 60898-1) |
- |
1000 |
|
Test Charges will vary depending on the No of poles, Rating and Marking of the Sample
Test charge applicable will be intimated through a proforma invoice |
| 9.14.1(Test of resistance to heat, IS 60898-1) |
- |
1700 |
|
Test Charges will vary depending on the No of poles, Rating and Marking of the Sample
Test charge applicable will be intimated through a proforma invoice |
| 9.14.2(Test of resistance to heat, IS 60898-1) |
- |
1700 |
|
Test Charges will vary depending on the No of poles, Rating and Marking of the Sample
Test charge applicable will be intimated through a proforma invoice |
| 9.14.3(Test of resistance to heat, IS 60898-1) |
- |
1700 |
|
Test Charges will vary depending on the No of poles, Rating and Marking of the Sample
Test charge applicable will be intimated through a proforma invoice |
| 9.16(Test of resistance to rusting) |
- |
1700 |
|
Test Charges will vary depending on the No of poles, Rating and Marking of the Sample
Test charge applicable will be intimated through a proforma invoice |
| 9.15(Resistance to abnormal heat and to fire) |
- |
5200 |
|
Test Charges will vary depending on the No of poles, Rating and Marking of the Sample
Test charge applicable will be intimated through a proforma invoice |
| 9.7.5.4(Test of protection against electric shock, IS 60898-1) |
- |
18000 |
|
Test Charges will vary depending on the No of poles, Rating and Marking of the Sample
Test charge applicable will be intimated through a proforma invoice |
| 9.7.1(Test of protection against electric shock, IS 60898-1) |
- |
4000 |
|
Test Charges will vary depending on the No of poles, Rating and Marking of the Sample
Test charge applicable will be intimated through a proforma invoice |
| 9.7.2(Test of protection against electric shock, IS 60898-1) |
- |
25500 |
|
Test Charges will vary depending on the No of poles, Rating and Marking of the Sample
Test charge applicable will be intimated through a proforma invoice |
| 9.7.3(Test of protection against electric shock, IS 60898-1) |
- |
25500 |
|
Test Charges will vary depending on the No of poles, Rating and Marking of the Sample
Test charge applicable will be intimated through a proforma invoice |
| 9.7.4(Test of protection against electric shock, IS 60898-1) |
- |
7650 |
|
Test Charges will vary depending on the No of poles, Rating and Marking of the Sample
Test charge applicable will be intimated through a proforma invoice |
| 9.7.5.2(Test of protection against electric shock, IS 60898-1) |
- |
24000 |
|
Test Charges will vary depending on the No of poles, Rating and Marking of the Sample
Test charge applicable will be intimated through a proforma invoice |
| 9.8(Test of temperature-rise and measurement of power loss, IS 60898-1) |
- |
35700 |
|
Test Charges will vary depending on the No of poles, Rating and Marking of the Sample
Test charge applicable will be intimated through a proforma invoice |
| 9.9(28- day test, IS 60898-1) |
- |
150700 |
|
Test Charges will vary depending on the No of poles, Rating and Marking of the Sample
Test charge applicable will be intimated through a proforma invoice |
| 9.11(Verification of mechanical and electrical endurance, IS 60898-1) |
- |
102750 |
|
Test Charges will vary depending on the No of poles, Rating and Marking of the Sample
Test charge applicable will be intimated through a proforma invoice |
| 9.12(Short- Circuit tests, IS 60898-1) |
- |
71100 |
|
Test Charges will vary depending on the No of poles, Rating and Marking of the Sample
Test charge applicable will be intimated through a proforma invoice |
| 9.12.12(Verification of the circuit-breaker after short-circuit tests) |
- |
45150 |
|
Test Charges will vary depending on the No of poles, Rating and Marking of the Sample
Test charge applicable will be intimated through a proforma invoice |
| 9.12.11.2.2(Short-circuit test for verifying the suitability of circuit-breakers for use in IT systems) |
- |
71100 |
|
Test Charges will vary depending on the No of poles, Rating and Marking of the Sample
Test charge applicable will be intimated through a proforma invoice |
| 9.10.2(Test of tripping characteristic, IS 60898-1) |
- |
53500 |
|
Test Charges will vary depending on the No of poles, Rating and Marking of the Sample
Test charge applicable will be intimated through a proforma invoice |
| 9.10.3(Test of tripping characteristic, IS 60898-1) |
- |
53500 |
|
Test Charges will vary depending on the No of poles, Rating and Marking of the Sample
Test charge applicable will be intimated through a proforma invoice |
| 9.10.4(Test of tripping characteristic, IS 60898-1) |
- |
53500 |
|
Test Charges will vary depending on the No of poles, Rating and Marking of the Sample
Test charge applicable will be intimated through a proforma invoice |
| 9.10.5(Test of tripping characteristic, IS 60898-1) |
- |
53500 |
|
Test Charges will vary depending on the No of poles, Rating and Marking of the Sample
Test charge applicable will be intimated through a proforma invoice |
| 9.13(Resistance to mechanical shock and impact) |
- |
9600 |
|
Test Charges will vary depending on the No of poles, Rating and Marking of the Sample
Test charge applicable will be intimated through a proforma invoice |
|
31 Dec, 2026 |
-
- |
| 8978 |
BIS, Southern Regional Laboratory (SRL)
| None
| IS 318 (1981) |
Specification for leaded tin bronze ingots and castings (Second Revision) |
- |
- View breakup
Rs 1650/- For Castings: Gr LTB1, LTB2, LTB3, LTB5
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 6.1 (Freedom from defects-Ingots) |
- |
|
|
|
| 6.2 (Freedom from defects-Castings) |
- |
|
|
|
| 7.1 (Mass) |
- |
|
|
|
| 7.2 (Dimension) |
- |
|
|
|
|
- |
-
3 bars
Excluding except chemical tests , tensile test |
| 8979 |
BIS, Southern Regional Laboratory (SRL)
| None
| IS 617 (1994) |
Cast aluminium and its alloys - Ingots and castings for general engineering purposes - Specification (Third Revision) |
- |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 6, Table 2. (MECHANICAL PROPERTIES OF CASTINGS) |
- |
|
|
|
| 6.2 (Hardness) |
- |
|
|
|
|
- |
-
" 300 mm long x 2 Nos. Facility for preparation of test specimen not available"
Excluding Chemical facility not available |
| 8980 |
BIS, Eastern Regional Laboratory (ERL)
| None
| IS 4432 (1988) |
Specification for case hardening steels (First Revision) |
For all grades except test mentioned in remarks |
- View breakup
Rs 11660/- excluding Grain size, Cleanliness of steel and additional tests For elements other than Table-1: Rs 1004/- per element
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4 (Freedom from Defects) |
- |
|
|
|
| 7 (Hardness) |
- |
|
|
|
| 11 (Dimensional Tolerances) |
- |
|
|
|
| TABLE-1 (Clause-5) ( CARBON) |
- |
|
|
|
| TABLE-1 (Clause-5) (SULPHUR) |
- |
|
|
|
| TABLE-1 (Clause-5) (PHOSPHURS) |
- |
|
|
|
| TABLE-1 (Clause-5) (MANGANESE) |
- |
|
|
|
| TABLE-1 (Clause-5) (SILICON) |
- |
|
|
|
| TABLE-1 (Clause-5) (Chromium) |
- |
|
|
|
| TABLE-1 (Clause-5) (Nickel) |
- |
|
|
|
| TABLE-1 (Clause-5) (Molybdenum) |
- |
|
|
|
| 8 (Mechanical testing) |
- |
|
|
|
| 8.4 (Impact testing) |
- |
|
|
|
| 9 (Grain Size) |
- |
|
|
|
| 10 (Inclusion rating) |
- |
|
|
|
|
- |
-
Chem- Except Vanadium |
| 8981 |
BIS, Western Regional Laboratory (WRL)
| None
| IS 15644 (2006) |
Safety of electric toys |
- |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 7.0 (Marking and instructions) |
- |
|
|
|
| 8.0 (Power Input) |
- |
|
|
|
| 7.0 (Marking and instructions) |
- |
|
|
|
| 11.1 (Moisture resistance) |
- |
|
|
|
| 11.2 (Resistant to humidity) |
- |
|
|
|
| 12.0 (Electric strength at room temperature) |
- |
|
|
|
| 13.0 (Mechanical strength) |
- |
|
|
|
| 14.1 (Construction) |
- |
|
|
|
| 14.2 (Construction) |
- |
|
|
|
| 14.3 (Construction) |
- |
|
|
|
| 14.4 (Construction) |
- |
|
|
|
| 14.5 (Construction) |
- |
|
|
|
| 14.6 (Construction) |
- |
|
|
|
| 14.7 (Construction) |
- |
|
|
|
| 14.8 (Construction) |
- |
|
|
|
| 14.9 (Construction) |
- |
|
|
|
| 14.1 (Construction) |
- |
|
|
|
| 14.11 (Construction) |
- |
|
|
|
| 14.12 (Construction) |
- |
|
|
|
| 14.13 (Construction) |
- |
|
|
|
| 14.14 (Construction) |
- |
|
|
|
| 10.0 (Electrical strength at operating temperature) |
- |
|
|
|
| 15.1 (Protection of cords and wires) |
- |
|
|
|
| 7.0 (Marking and instructions) |
- |
|
|
|
| 16.0 (Components) |
- |
|
|
|
| 17 Table-1 (Screws and connections) |
- |
|
|
|
| 17 Table-1 (Nominal daimeter of screws made of insulating material) |
- |
|
|
|
| 18.0 (Clearance and creepage distance) |
- |
|
|
|
| 19.1 (Ball pressure test IEC 60695-10-2) |
- |
|
|
|
| 19.2.1 (Glow wire test IEC 60695-2-11) |
- |
|
|
|
| 7.0 (Marking and instructions) |
- |
|
|
|
| 13.0 (Mechanical strength) |
- |
|
|
|
| 7.0 (Marking and instructions) |
- |
|
|
|
|
- |
-
The following test facilities for clauses are not available:
1. Component (Clause 16)
2. Clause 14.15
3. Clause 20 |
| 8982 |
BIS, Western Regional Laboratory (WRL)
| None
| IS 5950 (1984) |
Specification for shot firing cables (For Use Other Than In Shafts) (First Revision) |
- |
Rs 11030/- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 3.1 (Conductor : Material -IS : 8130-2013) |
- |
|
|
|
| 4.1 (Insulation : Material -IS : 5831-1984) |
- |
|
|
|
| 5.1 (Sheath : materail IS : 5831-1984) |
- |
|
|
|
| 6.1 (Conductor : Construction IS : 8130-2013) |
- |
|
|
|
| 7.1 (Insulation : Application ) |
- |
|
|
|
| 7.2 (Thickness of Insulation - average ) |
- |
|
|
|
| 7.2 (Thickness of Insulation - Min. ) |
- |
|
|
|
| 7.3 (Colour of Insulation) |
- |
|
|
|
| 8.1, 9.1 (c) (Nominal radial thickness of sheath) |
- |
|
|
|
| 8.2 (Thickness of Sheath) |
- |
|
|
|
| 8.3 (Colour of Sheath) |
- |
|
|
|
| 9.1 a) (Annealing test) |
- |
|
|
|
| 9.1 b) (Conductor resistance test) |
- |
|
|
|
| 9.1 d) i) (Insulation : Tensile strength) |
- |
|
|
|
| 9.1 d) i) (Insulation : elongation at break) |
- |
|
|
|
| 9.1 d) i) (Sheath : Tensile strength) |
- |
|
|
|
| 9.1 d) i) (Sheath : elongation at break) |
- |
|
|
|
| 9.1 d) ii) (Ageing in air oven - Insulation : Tensile strength) |
- |
|
|
|
| 9.1 d) ii) (Ageing in air oven - Insulation : Tensile strength Variation) |
- |
|
|
|
| 9.1 d) ii) (Ageing in air oven - Insulation : elongation at break) |
- |
|
|
|
| 9.1 d) ii) (Ageing in air oven - Insulation : elongation variation at break) |
- |
|
|
|
| 9.1 d) ii) (Ageing in air oven - Sheath : Tensile strength) |
- |
|
|
|
| 9.1 d) ii) (Ageing in air oven - Sheath : Tensile strength variation ) |
- |
|
|
|
| 9.1 d) ii) (Ageing in air oven - Sheath : elongation at break) |
- |
|
|
|
| 9.1 d) ii) (Ageing in air oven - Sheath : elongation variation at break) |
- |
|
|
|
| 9.1 d) iii ) (Loss of mass test - insulation ) |
- |
|
|
|
| 9.1 d) iii ) (Loss of mass test - Sheath ) |
- |
|
|
|
| 9.1 d) iv ) (Hot deformation - insulation ) |
- |
|
|
|
| 9.1 d) iv ) (Hot deformation - sheath ) |
- |
|
|
|
| 9.1 d) v ) (Heat shock - insulation ) |
- |
|
|
|
| 9.1 d) v ) (Heat shock - Sheath ) |
- |
|
|
|
| 9.1 d) vi ) (Shrinkage - insulation ) |
- |
|
|
|
| 9.1 d) vi ) (Shrinkage : Crack observed - insulation ) |
- |
|
|
|
| 9.1 d) vi ) (Shrinkage - Sheath ) |
- |
|
|
|
| 9.1 d) vi ) (Shrinkage: Crack observed - Sheath ) |
- |
|
|
|
| 10.2 (Voltage test ) |
- |
|
|
|
| 9.1 f) (Insulation resistance test: Volume resistivity ) |
- |
|
|
|
| 9.1 f) (Insulation resistance test : IR constant) |
- |
|
|
|
| 10.3 (Spark Test) |
- |
|
|
|
| 10.4 (Flammability Test ) |
- |
|
|
|
| 11.1 (Manufacturer’s Identification) |
- |
|
|
|
| 11.2 (Cable Code) |
- |
|
|
|
| 12.1 (packing ) |
- |
|
|
|
| 12.2 (Marking ) |
- |
|
|
|
| 12.2.1 (Standard marks ) |
- |
|
|
|
|
- |
-
- |
| 8983 |
BIS, Western Regional Laboratory (WRL)
| None
| IS 11217 (1984) |
Specification for ultramarine blue for use in textile industry |
- |
Rs. 600 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 2.1 (Composition) |
- |
|
|
|
| 2.2 (Identification) |
- |
|
|
|
|
- |
-
- |
| 8984 |
BIS, Western Regional Laboratory (WRL)
| None
| IS 10124 : Part 13 (2009) |
Fabricated PVC-U Fittings for Potable Water Supplies - Specification Part 13 Specific Requirements for 11¼oBends PART 12 SPECIFIC REQUIREMENTS FOR 22 ½o BENDS |
- |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 3.1 (General) |
- |
|
|
|
| 3.2.2, Table 2 (Dimension of 11 1/4° bends for Elastomeric sealing ring joint) |
- |
|
|
|
| 3.2.2, Table 1 (Dimension of 11 1/4° bends) |
- |
|
|
|
| 3.2.3 (Socket, Measurement) |
- |
|
|
|
|
- |
-
The following test facilities are not available:
(1)Effect on water
(2) Testing facility above 250 mm for Short Term Hydrostatic test |
| 8985 |
BIS, Western Regional Laboratory (WRL)
| None
| IS 10124 : Part 12 (2009) |
Fabricated pvc - U fittings for potable water supplies - Specification: Part 12 specific requirements for 22½ degree bends (Second Revision) |
- |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 3.1 (General) |
- |
|
|
|
| 3.2.2, Table 1 (Dimensions of 22 ½ deg Bends) |
- |
|
|
|
| 3.2.2, Table 2 (Dimensions of 22 ½ deg Bend for Elastomeric Sealing Ring Joint) |
- |
|
|
|
| 3.2.3 (Socket, measurements) |
- |
|
|
|
|
- |
-
The following test facilities are not available:
(1)Effect on water
(2) Testing facility above 250 mm for Short Term Hydrostatic test |
| 8986 |
BIS, Western Regional Laboratory (WRL)
| None
| IS 10124 : Part 11 (2009) |
Fabricated pvc - U fittings for potable water supplies - Specification: Part 11 specific requirements for 40 degree bends (Second Revision) |
- |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 3.1 (General) |
- |
|
|
|
| 3.2.2, Table 1 (Dimensions of 30 deg Bends) |
- |
|
|
|
| 3.2.2, Table 2 (Dimensions of 30 deg Bend for Elastomeric Sealing Ring Joint) |
- |
|
|
|
|
- |
-
The following test facilities are not available:
(1)Effect on water
(2) Testing facility above 250 mm for Short Term Hydrostatic test |
| 8987 |
BIS, Western Regional Laboratory (WRL)
| None
| IS 10124 : Part 10 (2009) |
Fabricated pvc - U fittings for potable water supplies - Specification: Part 10 specific requirements for 45 degree bends (Second Revision) |
- |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 3.1 (General) |
- |
|
|
|
| 3.2, 3.2.1, Fig 2 (Manufacture) |
- |
|
|
|
| 3.2.2, Fig 1, table 1 (Dimensions) |
- |
|
|
|
| 3.2.3 (the socket measurement
shall comply with IS 10124 (Part 1).) |
- |
|
|
|
| Table 1 (Clause 3.2.2, and Fig. 1) (Dimensions of 45o Bend) |
- |
|
|
|
| Table 2 (Clause 3.2.2, and Fig. 2) (Dimensions of 45° Bend for Elastomeric Sealing Ring Joint) |
- |
|
|
|
|
- |
-
The following test facilities are not available:
(1)Effect on water
(2) Testing facility above 250 mm for Short Term Hydrostatic test |
| 8988 |
BIS, Western Regional Laboratory (WRL)
| None
| IS 10124 : Part 9 (2009) |
Fabricated pvc - U fittings for potable water supplies - Specification: Part 9 specific requirements for 60 degree bends (Second Revision) |
- |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 3.1 (General) |
- |
|
|
|
| 3.2, 3.2.1, Fig 2 (Manufacture) |
- |
|
|
|
| 3.2.2, Fig 1, table 1 (Dimensions) |
- |
|
|
|
| 3.2.3 (the socket measurement
shall comply with IS 10124 (Part 1).) |
- |
|
|
|
| Table 1 (Clauses 3.2.2, 3.2.3, and Fig. 1) (Dimensions of 60o Bends) |
- |
|
|
|
| Table 2 (Clause 3.2.2, and Fig. 2) (Dimensions of 60o Bend for Elastomeric Sealing Ring Joint) |
- |
|
|
|
|
- |
-
The following test facilities are not available:
(1)Effect on water
(2) Testing facility above 250 mm for Short Term Hydrostatic test |
| 8989 |
BIS, Western Regional Laboratory (WRL)
| None
| IS 10124 : Part 8 (2009) |
Fabricated pvc - U fittings for potable water supplies - Specification: Part 8 specific requirements for 90 degree bends (Second Revision) |
- |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 3.1 (General) |
- |
|
|
|
| 3.2, 3.2.1, Fig 2 (Manufacture) |
- |
|
|
|
| 3.2.2, Fig 2, table 2 (Dimensions) |
- |
|
|
|
| 3.2.3 (the socket measurement shall
comply with IS 10124 (Part 1).) |
- |
|
|
|
| Table 1 (Clause 3.2.2, and Fig. 1) (Dimensions of 90o Bends) |
- |
|
|
|
| Table 2 (Clause 3.2.2, and Fig. 2) (Dimensions of 90o Bend for Elastomeric Sealing Ring Joint) |
- |
|
|
|
|
- |
-
The following test facilities are not available:
(1)Effect on water
(2) Testing facility above 250 mm for Short Term Hydrostatic test |
| 8990 |
BIS, Western Regional Laboratory (WRL)
| None
| IS 10124 : Part 7 (2009) |
Fabricated pvc - U fittings for potable water supplies - Specification: Part 7 specific requirements for threaded adaptors (Second Revision) |
- |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 3.1 (General) |
- |
|
|
|
| 3.2 (Materials) |
- |
|
|
|
| 3.3, 3.3.1, Fig 1 (Manufacture) |
- |
|
|
|
| 3.3.2, table 1, fig 1 (Dimensions) |
- |
|
|
|
| 3.3.3 (socket measurement shall
comply with IS 10124 (Part 1).) |
- |
|
|
|
| Table 1 (Clauses 3.3.1 and 3.3.2) (Dimensions of Threaded Adaptors) |
- |
|
|
|
|
- |
-
The following test facilities are not available:
(1)Effect on water
(2) Testing facility above 250 mm for Short Term Hydrostatic test |
| 8991 |
BIS, Western Regional Laboratory (WRL)
| None
| IS 10124 : Part 6 (2009) |
Fabricated pvc - U fittings for potable water supplies - Specification: Part 6 specific requirements for flanged tail pieces with metallic flanges (Second Revision) |
- |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 3.1 (General) |
- |
|
|
|
| 3.2, 3.2.1, Fig 1 (Manufacture) |
- |
|
|
|
| 3.2.2, Fig 2, table 2 (Dimensions) |
- |
|
|
|
| Table 1 (Clause 3.2.2, and Fig. 1) (Dimensions of PVC Flanged Tail Piece with Metallic Flanges) |
- |
|
|
|
| Table 2 (Cl.3.2.2, and Fig.1) (Dimensions of Flanged Tail Piece with Metallic Flange for Elastomeric Sealing Ring Joint) |
- |
|
|
|
|
- |
-
The following test facilities are not available:
(1)Effect on water
(2) Testing facility above 250 mm for Short Term Hydrostatic test |
| 8992 |
BIS, Western Regional Laboratory (WRL)
| None
| IS 10124 : Part 5 (2009) |
Fabricated pvc - U fittings for potable water supplies - Specification: Part 5 specific requirements for equal tees (Second Revision) |
- |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 3.1 (General) |
- |
|
|
|
| 3.2, 3.2.1, Fig 1 (Manufacture) |
- |
|
|
|
| 3.2.2, Fig 1 (Dimensions) |
- |
|
|
|
| Table 1(Cl.3.2.2, and Fig.1) (Dimensions of Equal Tees) |
- |
|
|
|
|
- |
-
The following test facilities are not available:
(1)Effect on water
(2) Testing facility above 250 mm for Short Term Hydrostatic test |
| 8993 |
BIS, Western Regional Laboratory (WRL)
| None
| IS 10124 : Part 4 (2009) |
Fabricated pvc - U fittings for potable water supplies - Specification: Part 4 specific requirements for caps (Second Revision) |
- |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 3.1 (General) |
- |
|
|
|
| 3.2, 3.2.1, Fig 1 (Manufacture) |
- |
|
|
|
| 3.2.2, Fig 1 (Dimensions) |
- |
|
|
|
| Table 1(Cl.3.2.2, and Fig.1) (Dimensions of Caps) |
- |
|
|
|
|
- |
-
The following test facilities are not available:
(1)Effect on water
(2) Testing facility above 250 mm for Short Term Hydrostatic test |
| 8994 |
BIS, Western Regional Laboratory (WRL)
| None
| IS 10124 : Part 3 (2009) |
Fabricated PVC-U Fittings for Potable Water Supplies - Specification Part 3 Specific Requirements for Straight Reducers |
- |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 3.1 (General) |
- |
|
|
|
| 3.2, 3.2.1, Fig 1 (Manufacture) |
- |
|
|
|
| 3.2.2, Fig 1 (Dimensions) |
- |
|
|
|
| Table-1 (cl.3.2.2, Fig 1) (Dimensions of Straight Reducers) |
- |
|
|
|
|
- |
-
Test facilities are not available for the following:
(1)Effect on water
(2) Testing facility above 250 mm for Short Term Hydrostatic test |
| 8995 |
BIS, Western Regional Laboratory (WRL)
| None
| IS 5158 (1987) |
Specification for phthalic anhydride,technical - (Second Revision) |
- |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 2.1 (Description) |
- |
|
|
|
|
- |
-
- |
| 8996 |
BIS, Western Regional Laboratory (WRL)
| None
| IS 4199 (2001) |
Toilet soap, liquid - Specification (Third Revision) |
- |
Rs 2980/- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl.4.1 (Description) |
- |
|
|
|
|
- |
-
Test facility not available for following;
1.SKIN SENSITIZATION TEST ON GUINEA PIGS |
| 8997 |
BIS, Western Regional Laboratory (WRL)
| None
| IS 252 (2013) |
Caustic soda - Specification (Fourth Revision) |
- |
Rs 5100/- (for Lye & Solid) View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 3 (Form and Description) |
- |
|
|
|
| Cl. 3.3 and 3.4(Table 1, S. no i) (Sodium carbonate (as Na2CO3), percent by mass) |
- |
|
|
|
| Cl. 3.3 and 3.4(Table 1, S. no ii) (Sodium hydroxide (as NaOH), percent by mass) |
- |
|
|
|
| Cl. 3.3 and 3.4(Table 1, S. no iii) (Chlorides (as Cl– ), percent by mass) |
- |
|
|
|
| Cl. 3.3 and 3.4(Table 1, S. no iv) (Sulphates (as SO4), percent by mass) |
- |
|
|
|
| Cl. 3.3 and 3.4(Table 1, S. no v) (Silicates (as SiO2), percent by mass) |
- |
|
|
|
| Cl. 3.3 and 3.4(Table 1, S. no vi) (Iron (as Fe)) |
- |
|
|
|
| Cl. 3.3 and 3.4(Table 1, S. no vii) (Copper) |
- |
|
|
|
| Cl. 3.3 and 3.4(Table 1, S. no viii) (Manganese) |
- |
|
|
|
| Cl. 3.3 and 3.4(Table 1, S. no ix) (Chlorates and per-chlorates) |
- |
|
|
|
| Cl. 3.3 and 3.4(Table 1, S. no x) (Matter insoluble water, percent by mass) |
- |
|
|
|
| Cl. 3.3 and 3.4(Table 1, S. no xii) (Sodium hydroxide) |
- |
|
|
|
|
- |
-
Test facility not available for the following:
1. Mercury |
| 8998 |
BIS, Western Regional Laboratory (WRL)
| None
| IS 21 (1992) |
Wrought aluminium and aluminium alloys for manufacture of utensils specification (Fourth Revision) |
- |
Rs.6600/- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4.2,
Table 2 of IS:21 (Designation & Condition 64430, 'W') (Tensile Strength) |
- |
|
|
|
|
- |
-
Test facilities are not available for the following:
1. Chemical composition as per Cl. 4.2
2.Tensile Test (Proof Stress )
3.Bend Test |
| 8999 |
BIS, Northern Regional Laboratory (NRL)
| None
| IS 2791 (1992) |
Soluble coffee powder - Specification (Third Revision) |
- |
- View breakup
Rs. 4126/- excluding copper content and pesticide residues
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 3.4 Table 1 (Moisture content) |
- |
|
|
|
| 3.4 Table 1 (Total ash) |
- |
|
|
|
| 3.4 Table 1 (Caffeine content) |
- |
|
|
|
| 3.1 (Description ) |
- |
|
|
|
| 3.4 Table 1 (Solubility in boiling) |
- |
|
|
|
| 3.4 Table 1 (Solubility in cold water) |
- |
|
|
|
|
- |
-
Caffeine content, Cu |
| 9000 |
BIS, Bengaluru Branch Laboratory (BNBL)
| None
| IS 6613 (2002) |
Neutral spirit for alcoholic drinks - Specification (First Revision) |
- |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4, Table 1 (Relative density at 20/20°C) |
- |
|
|
|
| 4, Table 2 (Ethanol percent (v/v at 20°C)) |
- |
|
|
|
| 4, Table 3 (Miscibility with water) |
- |
|
|
|
| 4, Table 4 (Acidity as acetic acid) |
- |
|
|
|
| 4, Table 5 (Residue on evaporation, ) |
- |
|
|
|
| 4, Table 6 (Esters as CH3COOC2H5 ) |
- |
|
|
|
| 4, Table 7 (Lead) |
- |
|
|
|
| 4, Table 8 (Methyl alcohol ) |
- |
|
|
|
| 4, Table 9 (Furfural) |
- |
|
|
|
| 4, Table 10 (Aldehyde as acetaldehyde) |
- |
|
|
|
| 4, Table 11 (Permanganate reaction time) |
- |
|
|
|
| 4, Table 12 (Copper ( as Cu )) |
- |
|
|
|
| 4, Table 13 (Higher alcohol as iso-amyl alcohol) |
- |
|
|
|
|
- |
-
Exclusion
Ethanol content ,Methyl alcohol, Higher alcohols,Lead,Acidity as Acetic acid,Ester,Furfural |
