BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

12008 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

11641

BIS, Central Laboratory (CL)

None

IS 1827 (1989)

Pesticides - Dimethyl amine SL salts of 2, 4 - D - Specification (Second Revision)

Rs. 3434/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.2 (Description)	-
3.4. Table 1. iii (Alkalinity)	-
3.1 (Constituents)	-
3.3 (Identity Test)	-
3.4. Table 1. ii (Melting Point of Extracted Acid)	-
3.4. Table 1. i ( Acid Content)	-

-
-

11642

BIS, Western Regional Laboratory (WRL)

None

IS 277 (2018)

Galvanized steel strips and sheets (Plain And Corrugated) - Specification (Seventh Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 8.1 (UTM)	-
Cl 8.2 (Press)	-
Cl 13 (Weight)	-
Cl 14 (Length, Width & Thickness)	-
Cl 10 (Galvanising Test)	-
7.1 & 10.2 (Mass of Coating: Single Spot Test)	-
7.1 & 10.2 (Mass of Coating: Triple Spot Test)	-
5.1 (phosphorus)	-
5.1 (silicon )	-
5.1 (manganese)	-
5.1 (sulphur)	-
5.1 (carbon)	-

-
Test facilities are not available for the following: 1. Ti, Al, Cu, micro-alloying element, Boron

11643

BIS, Central Laboratory (CL)

None

IS 13422 (1992)

Disposable surgical rubber gloves specification

Rs.6900.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.4 (Sterility)	-
5.2.2 and Table 1 Fig. 1 (Dimensions - Length)	-
5.2.2 and Table 1 Fig. 1 (Dimensions - Width)	-
5.2.2 and Table 1 Fig. 1 (Dimensions - Thickness of Finger)	-
5.2.2 and Table 1 Fig. 1 (Dimensions - Thickness of Palm)	-
5.2.2 and Table 1 Fig. 1 (Dimensions - Thickness of Cuff)	-
5.3 and Table 2 ( Tensile Strength Before Ageing)	-

-
-

11644

BIS, Northern Regional Laboratory (NRL)

None

IS 2029 (1998)

Ring wrenches (Spanners) - Specification (Fourth Revision)

Rs.3700/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3, Table-1 (Dimensions- s1)	-
3, Table-1 (Dimensions- s2)	-
3, Table-1 (Dimensions- a)	-
3, Table-1 (Dimensions- b1)	-
3, Table-1 (Dimensions- b2)	-
3, Table-1 (Dimensions- L)	-
6 (Workmanship and Finish)	-
7 (Designation)	-
Cl.4 (CARBON)	-
Cl.4 (SULPHUR)	-
Cl.4 (PHOSPHURS)	-
Cl.4 (MANGANESE)	-
Cl.4 (SILICON)	-

-
Excluding Torque test, Micro alloying elements

11645

BIS, Western Regional Laboratory (WRL)

None

IS 14255 (1995)

Aertal bunched cables - For working voltages up to and including 1100 Volts - Specification

- View breakup
Rs.16650.00 for XLPE insulated single core cable Rs.15150.00 for PE insulated single core cable

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1 (Phase/Street Lighting conductor)	-
4.2 (Messenger (Neutral Conductor or Otherwise))	-
5.1 (Insulation)	-
6.1 (Flexibility class)	-
6.2 (Compactness)	-
6.2 (No of strands)	-
6.2 (Surface)	-
6.3 (Protective barrier)	-
6.4 (size of street lighting conductor)	-
6.5 (Size of messenger conductor )	-
6.6 (Joints in messenger conductor )	-
6.6 (Direction of outer layer)	-
7.1 (Insulation)	-
7.2 ( Thickness of insulation)	-
7.3 (Tolerance on thickness of insulation )	-
7.4 (Aplication of the insulation )	-
7.5 (Colour of the insulation )	-
8.1 (Core identification)	-
8.2 (Core identification)	-
8.3 (Identification by other means)	-
9.1 (Assembly (Laying up))	-
9.2 (Assembly (Laying up))	-
9.3 (Direction of lay)	-
10.1 a) i) (Tests on phase/street light conductor: tensile test - Test method IS10810:Part 2)	-
10.1 a) ii) (Wrapping test - 10810: Part 3)	-
10.1 a) iii) (Resistance test - IS10810: Part 5)	-
10.1 b) i) (Test on messenger conductor: Breaking load - IS 10810: Part 2)	-
10.1 b) ii) (Test on messenger conductor: Elongation test - Cl 11.3)	-
10.1 b) iii) (Test on messenger conductor: Resistance test - IS 10810: Part 5)	-
10.1 c) i) (Physical tests for XLPE Insulation: Tensile strength - IS 10810: Part 7)	-
10.1 c) i) (Physical tests for XLPE Insulation: elongation at break - IS 10810: part 7)	-
10.1 c) ii) (Ageing in air oven : Tensile strength variation - IS 10810:Part 11)	-
10.1 c) ii) (Ageing in air oven : Elongation variation- IS 10810: Part 11)	-
10.1 c) iii) (Hot set test: Elongation under load - IS 10810: Part 30)	-
10.1 c) iii) (Hot set test: Permanent elongation (set) after cooling - IS 10810: Part 30)	-
10.1 c) iv) (Shrinkage test : Shrinkage - 10810:Part 12)	-
10.1 c) iv) (Shrinkage test : Crack Observed - 10810:Part 12)	-
10.1 c) v) (Water ahsorption (Gravimetric) - IS 10810: Part 33 )	-
10.1 d) i) (Physical test for PE insulation: Tensile strength - IS 10810: Part 7 )	-
10.1 d) i) (Physical test for PE insulation: elongation at break - IS 10810: Part 7)	-
10.1 f) (Insulation resistance (Volume resistivity) test a) volume resistivity at 27°C - IS 10810: Part 43)	-
10.1 f) (Insulation resistance (Volume resistivity) test b) volume resistivity at 70°C - IS 10810: Part 43)	-
10.1 g) (High voltage test - IS10810:Part 45)	-

-
Complete test facility is available

11646

BIS, Central Laboratory (CL)

None

IS 3748 (1990)

Tool and die steels - Specification (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
10 (Dimensions and Tolerances, mm)	-
9.1 (Hardness , max-IS 1500 )	-
6 (Freedom from defects)	-
Cl 7.1, 7.2, 12.1 & Table 1 (Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl 7.1, 7.2, 12.1 & Table 1 (Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl 7.1, 7.2, 12.1 & Table 1 (Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl 7.1, 7.2, 12.1 & Table 1 (Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl 7.1, 7.2, 12.1 & Table 1 (Nickel- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl 7.1, 7.2, 12.1 & Table 1 (Chromium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl 7.1, 7.2, 12.1 & Table 1 (Molybdenum- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl 7.1, 7.2, 12.1 & Table 1 (Vanadium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl 7.1, 7.2, 12.1 & Table 1 (Tungsten- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl 7.1, 7.2, 12.1 & Table 1 (Copper- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl 7.1, 7.2, 12.1 & Table 1 (Tin- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl 7.1, 7.2, 12.1 & Table 1 (Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-

-
Sample size shall be minimum dia> 3mm and thickness > 0.8 mm; Excluding -; Cl 6.2 Decarburization, Cl 13 Ultrasonic Test

11647

BIS, Central Laboratory (CL)

None

IS 1824 (1978)

Specification for insecticidal space spray

Rs 4200/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
2.1.1 (Description)	-
2.3 (Flash Point)	-
2.2 (Active Ingredient Content - Pyrethrins)	-
2.2 (Active Ingredient Content - Malathion)	-
2.1.2 (Identity)	-

-
Excluding Table 1 Cl. 2.2 Content;

11648

BIS, Western Regional Laboratory (WRL)

None

IS 9968 : Part 1 (1988)

Specification for elastomer insulatedcables: Part 1 for working voltages up to and including 1100 volts (First Revision)

Rs.12000/ View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.1 ( Copper Cooduetor)	-
3.2 (Aluminium conductor)	-
4.1 (INSULATION : lnsulation for General Service)	-
4.2 (INSULATION : Heat Resisting insulation)	-
4.3 (INSULATION : Silicone Rubber Insulation)	-
5.1 (TAPE : Proofed Tape)	-
5.2 (TAPE : 2 Polyethyl_ Terephthalate ( PETP ) Tape or Plastic: Tape or Any Other SlIIitable Tape )	-
5.3 (TAPE : Giass Tape)	-
6.1 (FILLERS : )	-
7.1 (BRAID : Textile Braid)	-
7.2 (BRAID : Glass Braid )	-
8.1 (SHEATH : General Service Insulated Cables and Flexible Cords)	-
8.2 (SHEATH :Heat Resisting Insulated Cables)	-
9.1 (PresenRtive Compound)	-
9.2 (Varnish)	-
10 ( Conductor )	-
11 (Separator tape)	-
12.2 (Insulation : Thickness of Insufatien)	-
12.4 (Insulation : Allplication of Insulation)	-
13 (CORE IDENTiFICATlON)	-
14 (Tape)	-
15 (BRAIDING)	-
16 (COMPOUNDING AND VARNISHING)	-
17 (LAYING UP OF CORES)	-
18 ( Binder tape)	-
19.2 (Sheath : Thickness of Sheath)	-
19.4 ( Sheath :Colour)	-
20 ( Overall diameter)	-
21. (b) (Annealing Test (for coper))	-
21. (c) ( Tensile Test (for aluminium))	-
21. (d) ( Wrapping Test (for aluminium))	-
21. (e) (Conductor Resistance )	-
21.1 ( Tensile strength )	-
22.1 ( Elongation)	-
21.1 (type test : Ageing In air oven)	-
21.1 (type test : Hot set elongation)	-
21.1 (type test : Tear resistance )	-
22.2 (type test :Insulauon resistance High voltage (water immersron ) test)	-
22.2 (type test : Flammability test ( applicable to cables finished With SE 3 and SE 4 sheaths only) )	-
23 (identification)	-

-
The following test facilities for clauses are not available: 1. Tear resistance test. 2. Water absorption (Electrical) Test for IE2 type elastomeric insulation

11649

BIS, Northern Regional Laboratory (NRL)

None

IS 2721 (2003)

Galvanized steel chain link fence fabric - Specification (Second Revision)

- View breakup
Rs.5950/- (for wire below 5 mm Dia), Rs.6910/- (for wires above 5 mm Dia) and Material testing charges as per relevant referred Iss

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl.5 (Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl.5 (Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl.5 (Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl.5 (Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl.5 (Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl.8 (Chain link fence fabric(Mass of zinc coating)- IS 6745)	-
Cl.8 (Chain link fence fabric (Uniformity of Zinc coating)-IS 2633)	-
Cl.9.2 (Mesh wire (Mass of zinc coating)- IS 6745)	-
Cl.9.2 (Mesh Wire (Uniformity of Zinc coating)-IS 2633)	-
Cl.6.1, 6.2, Table 1 (Mesh Size)	-
Cl.6.3, Table 1 (Width of the fabric)	-
Cl.6.3, Table 1 (Length of the fabric)	-
Cl.6.1, 6.2, Table 1 (Nominal Dia of Mesh wire)	-
Cl. 7.2 and Table 1 (Line Wire (Diameter))	-
Cl. 7.2 and Table 1 (Line Wire (Number of wires))	-
Cl.9.1.1 (Tensile test of mesh and line wires- IS 1608)	-
Cl.9.1.2 (Wrapping test of mesh and line wires-IS 1755)	-
Cl.9.1.3 (Twist test of mesh and line wires-IS 1717)	-
Cl.9.1.4 (Bend test of mesh and line wires- IS 1608)	-

-
Test facility is complete

11650

BIS, Western Regional Laboratory (WRL)

None

IS 9857 (1990)

Welding cables - Specification (First Revision)

Rs 11400/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4 (Conductor : Material )	-
5 (SEPARATOR)	-
6 (COVERING)	-
7 (CONDUCTOR : CONSTRUCTION )	-
8 (S E P A R A T O R)	-
9.1 (C O V E R I N G : Application )	-
9.2 (T h i c k n e s s o f C o v e r i n g)	-
9.3 (T o l e r a n c e on Thickness o f C o v e r i n g)	-
9.4 (A p p l i c a t i o n of C o v e r i n g)	-
9.5 (Colour of C o v e r i n g)	-
10.1 a) 1) (Annealing test - IS 10810: Part 1)	-
10.1 a) 2) (Conductor resistance tes - IS 10810 : Part 5)	-
10.1 c) 1) (Physical tests for covering : Tensile strength )	-
10.1 c) 1) (Physical tests for covering : Elongation at break )	-
10.1 c) 2) (Physical tests for covering - Ageing in Air oven : Tensile strength variation)	-
10.1 c) 2) (Physical tests for covering -Ageing in Air oven : Elongation at break )	-
10.1 c) 2) (Physical tests for covering - Ageing in Air oven : Tensile strength )	-
10.1 c) 2) (Physical tests for covering -Ageing in Air oven : Elongation variation at break )	-
10.1 c) 5) (Hot set test )	-
10.1 c) 5) (Permanent set )	-
11.1 (High Voltage Test ( Water Immersion Test ))	-
11.2 (Spark Test)	-
11.3 (Static Flexibility Test)	-
11.4 (Flammability Test)	-
12.1 (Manufacturer's Identification)	-
12.2 (Cable Identification)	-
12.3 (Cable Code)	-
13.1 (Packing )	-
13.2 (Marking)	-
14 (CABLE RATINGS)	-
15 (VOLTAGE DROP)	-

-
Complete test facility is available

11651

BIS, Northern Regional Laboratory (NRL)

None

IS 4223 (1975)

Steel Wire For Umbrella Ribs

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
8,9 (Sizes and Tolerances - IS 4223)	-
10.1, Table 1 (Mechanical ptoperties - IS 1608(Pt -1))	-
10.2 (Torsion Test - IS 1717)	-
7 (Freedom rom defects , IS 4223)	-
10.3 (Reverse Bend Test--IS 1716)	-
Cl 6.1 (Sulphur- Appropriate parts of IS 228.)	-
Cl 6.1 (Phosphorus- Appropriate parts of IS 228.)	-
Cl 6.1 (Sulphur- Appropriate parts of IS 228.)	-
Cl 6.1 (Phosphorus- Appropriate parts of IS 228.)	-

-
Test facility is complete

11652

BIS, Central Laboratory (CL)

None

IS 12299 (1998)

Dairy whitener - Specification (First Revision)

Rs. 18300/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.5.1 (Bacterial Count)	-
5.5.2 (Coliform Count)	-
5.5.2 (E Coli)	-
5.5.2 (Staphylococcus aureus)	-
5.5.3 (Salmonella)	-
5.6 Table 1 i) (Moisture)	-
5.6 Table 1 ii) (Milk Solids (non-fat))	-
5.6 Table 1 iii) (Insolubility Index)	-
5.6 Table 1 iv) (Total Ash (on dry basis))	-
5.6 Table 1 v) (Milk Fat)	-
5.6 Table 1 vi) (Acid Insoluble ash)	-
5.3 (Flavour and Taste)	-
4 (Description)	-

-
500 gm x 3

11653

BIS, Western Regional Laboratory (WRL)

None

IS 9537 : Part 3 (1983)

Specification for conduits for electrical installations: Part 3 rigid plain conduits of insulating meterials

Rs. 3300.00/, Rs. 2850.00/ View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6.1 (Marking)	-
6.2 (Durability of Marking as per 6.4 of IS: 9537 (Part 1)-1980)	-
6.3 (Standard Mark on Conduit)	-
7.1.1 (Maximum and minimum outside diameter of socket)	-
7.1.1 Table-2 (Length of Socket end)	-
7.1.2 (Maximum and minimum outside diameter of conduit)	-
7.2 (Minimum inside diameter of conduit)	-
7.3 (Length of conduit)	-
7.4 (Unifomity of The wall Thickness)	-
8.1 (Construction as per clause 8 of IS: 9537 (Part 1)-1980)	-
9.2 (Bending Test i) At Room Temp ii) At Low Temp (-5 ±2°C))	-
9.3 (Compression Test as per caluse 9.3 of IS: 9537 (Part 1)-1980)	-
9.4 (Impact Test as per clause 9.4 of IS: 9537 (Part 1)-1980)	-
9.5 (Collapse Test as per clause 9.5 of IS: 9537 (Part 1)-1980)	-
10 (Resistance to Heat -Ball presure test)	-
11 (Resistance to burning as per clause 11 of IS: 9537 (Part 1)-1980)	-
12 (Electrical Characteristics-Test for electric strength as per clause 12.1.1 of IS: 9537 (Part 1)-1980)	-
12 (Electrical Characteristics-Insulation resistance test as per clause 12.1.2 of IS: 9537 (Part 1)-1980)	-
9.3 (Compression Test (after removal of force) as per caluse 9.3.3 of IS: 9537 (Part 1)-1980)	-

-
Complete test facility is available

11654

BIS, Northern Regional Laboratory (NRL)

None

IS 2028 (2004)

Open jaw wrenches (Spanners) - Specification (Fijih Revision)

Rs.3700/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.1 (Dimensions- a)	-
3.1 (Dimensions- b)	-
3.1 (Dimensions- l)	-
3.2, 3.3, 3.4 (Dimensions- a)	-
3.2, 3.3, 3.4 (Dimensions- b1)	-
3.2, 3.3, 3.4 (Dimensions- b2)	-
3.2, 3.3, 3.4 (Dimensions- l)	-
3.2, 3.3, 3.4 (Dimensions- b2)	-
6 (Workmanship And Finish)	-

-
Excluding Torque test, Micro alloying elements

11655

BIS, Central Laboratory (CL)

None

IS 1488 (1989)

Pesticides - 2, 4 - D sodium salt, technical - Specification

Technical

- View breakup
Hence complete testing charges for the product are Rs.4800.00

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.1 (Description)	-
3.2.3 & 7.1 Table i (Acid content. ( calculated as 2, 4-dichlorophenoxy acetic acid. 2, 4.D))	-
3.2.3 & 7.1 Table ii (Water insoluble matter)	-
3.2.3 & 7.1 Table v (Loss on drying at 105°C)	-

-
-

11656

BIS, Northern Regional Laboratory (NRL)

None

IS 9523 (2000)

Ductile iron fittings for pressure pipes for water, gas and sewage - Specification (First Revision)

Rs.7245.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 5 (Thickness)	-
Cl 6 & Table 4,5,6&7 (Design & Tolerance)	-
Cl 9 (Tensile Test & Hardness Test)	-
Cl 10 (Hydrostatic Test)	-
Cl 11 (Nominal Diameter, Ovality, Dimensions, No. Of Holes & Bolt Sizes)	-
Cl 13 (Coating)	-

-
1 coated, 1 uncoated and separate sample for tensile and hardness test are required Except HST for DN above 300 mm

11657

BIS, Northern Regional Laboratory (NRL)

None

IS 7098 : Part 2 (2011)

Crosslinked polyethylene insulated thermoplastic sheathed cables - Specification: Part 2 for working voltages from 3.3 kV up to and including 33 kV (Second Revision)

Rs. 33750/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
20.13 (Test for Halogen Acid Gas Evolution)	-
4.1 (CONDUCTOR)	-
4.1.1 (CONDUCTOR)	-
5 (INSULATION)	-
6 (SCREENING)	-
6.1.1 (SCREENING : - Non-metallic — Semiconducting Compound)	-
6.1.2 (SCREENING : - Non-magnetic Metallic Tape for Single Core Unscreened and Unarmoured Cables)	-
7 (FILLERS AND INNER SHEATH)	-
8.1 (ARMOURING)	-
8.2 (ARMOURING)	-
9 (OUTER SHEATH )	-
10.1 (CONDUCTOR)	-
10.2 (CONDUCTOR)	-
11 (CONDUCTOR SCREENING)	-
12.1 (INSULATION)	-
12.2 (INSULATION : Thickness of Insulation)	-
12.3 (INSULATION : Tolerance on Thickness of Insulation)	-
12.4 (Eccentricity and Ovality)	-
12.5 (INSULATION : Application of Insulation)	-
13.1 (INSULATION SCREENING)	-
13.2 (INSULATION SCREENING)	-
13.3 (INSULATION SCREENING)	-
13.4 (INSULATION SCREENING)	-
14.1 (CORE IDENTIFICATION)	-
14.1.1 (CORE IDENTIFICATION)	-
15.1 (LAVING UP OF CORES)	-
16.1 (INNER SHEATH (COMMON COVERING))	-
16.2 (INNER SHEATH (COMMON COVERING))	-
16.2.1 (INNER SHEATH (COMMON COVERING))	-
16.3 (INNER SHEATH (COMMON COVERING) : Thickness of Inner Sheath)	-
16.3.1 (INNER SHEATH (COMMON COVERING) : Thickness of Inner Sheath)	-
17.1 (ARMOURING : Application )	-
17.1.1 (ARMOURING )	-
17.1.2 (ARMOURING )	-
17.1.3 (ARMOURING )	-
17.2 (ARMOURING : Type of armour )	-
17.2.1 (ARMOURING : Type of armour )	-
17.2 (ARMOURING : Coverage )	-
17.3 (ARMOURING : Dimension )	-
17.4 (ARMOURING : Joints)	-
16.4 (ARMOURING : Resistance)	-
18.1 (OUTER SHEATH)	-
18.2 (OUTER SHEATH: Colour)	-
18.3 (Thicknes of outer sheath : average )	-
18.3 (Thicknes of outer sheath : minimum )	-
19.1 i) a) (Annealing test (for copper))	-
19.1 i) b) (Tensile test (for aluminium) - Before stranding )	-
19.1 i) b) (Tensile test (for aluminium) - After stranding )	-
19.1 i) c) (Wrapping test ( for aluminium))	-
19.1 i) d) (Resistance test - Main conductor )	-
19.1 i) d) (Resistance test - Neutral conductor )	-
19.1 iii) a) (Phyaical tests for insulation : Tensile Test)	-
19.1 iii) a) (Phyaical tests for insulation : Elongation )	-
19.1 iii) b) (Phyaical tests for insulation - Ageing in air Oven : Tensile Variation )	-
19.1 iii) b) (Phyaical tests for insulation- Ageing in air oven : Elongation Variation )	-
19.1 vi) b) (Physical tests for outer sheath -Ageing in air oven : Elongation Variation )	-
19.1 iii) b) (Phyaical tests for insulation- Ageing in air oven : Elongation Variation )	-
19.1 iii) d) (Phyaical tests for insulation : Hot set )	-
19.1 iii) d) (Phyaical tests for insulation : Permanent set )	-
19.1 iii) e) (Phyaical tests for insulation : Shrinkage )	-
19.1 iii) e) (Phyaical tests for insulation : Shrinkage - Crack observed )	-
19.1 iii) f) (Insulation: Waterabsorption(gravimetric))	-
19.1 v) b) (Volume resistivity)	-
19.1 vi) a) (Physical tests for outer sheath : Tensile stregth )	-
19.1 vi) a) (Physical tests for outer sheath : Elongation )	-
19.1 vi) b) (Physical tests for outer sheath- Ageing in air oven : Tensile stregth )	-
19.1 iii) a) (Phyaical tests for insulation : Tensile Test)	-
19.1 vi) b) (Physical tests for outer sheath- Ageing in air oven : Tensile stregth )	-
19.1 vi) b) (Physical tests for outer sheath -Ageing in air oven : Elongation )	-
19.1 vi) b) (Physical tests for outer sheath- Ageing in air oven : Tensile stregth Variation )	-
19.1 vi) b) (Physical tests for outer sheath -Ageing in air oven : Elongation Variation )	-
19.1 vi) c) (Phyaical tests for Sheath : Shrinkage )	-
19.1 vi) c) (Phyaical tests for Sheath : Shrinkage - Crack observed )	-
19.1 vi) d) (Sheath : Hot deformation)	-
19.1 vi) e) (Loss of massIn air oven)	-
19.1 vi) f) (Sheath : Heat shock test)	-
19.1 vi) g) (Sheath : Thermalstability)	-
20.7 (High voltage test)	-
20.8 (Flammability test)	-
20.1 (Oxygen Index Test)	-
20.11 (Flame Retardance Test on Single Cables)	-
20.12 (Flame Retardance Test on Bunched Cables)	-
20.14 ( Test for Smoke Density)	-
20.15 (Temperature Index)	-
21.1 (IDENTIFICATION : Manufacturer's Identification)	-
21.2 (IDENTIFICATION : Cable Identification)	-
21.3 (IDENTIFICATION : Cable Code)	-

-
Test facility is complete for Chemical Except Cl.20.9 Ageing Test on complete cable, Cl.20.2 Partial discharge, impulse , Cl.20.7 HVT(above 10 kV), Cl.20.3 bending test ,Cl.20.4 Dielectric power factor test ,Cl.20.5 Heat Cycle test,Cl.20.6 Impulse withstand test

11658

BIS, Western Regional Laboratory (WRL)

None

IS 8783 : Part 4 : Sec 3 (1995)

Winding wires for submersible motors - Specification: Part 4 specification for individual wires: Sec 3 polyester and polypropylene insulated winding wires (First Revision)

Rs.8700/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.1 (The winding wire shall either be wound on spools / reels conforming to IS 482-1981. or supplied in a coils packed and labelled.)	-
6.1 (The winding wire shall carry following information marked on the lable on spool / reel / coil;)	-
6.1 (a) Reference to this Indian Standard;)	-
6.1 (b) Manufacturer's name,brand name or trade-mark;)	-
6.1 (c) Size of conductor / maximum overall diameter,)	-
6.1 (d) Length of conductor on spool / reel /coil;)	-
6.1 (e) Number of lengths onspool / reel / coil (if more than one);)	-
6.1 (f) Country of Manufacturer)	-
6.1 (g) Year of Manufacture.)	-
6.2 (BIS Certification Mark)	-
4 (i) Material)	-
5 (ii) Diameter [mm] Seperate wire:)	-
5 (ii) Diameter [mm] Wire taken from cable:)	-
5 (iii) Annealing test [Percentage] on Seperate wire:)	-
5 (iii) Annealing test [Percentage] on Wire taken from cable:)	-
5 (d) Resistance test [Ohm/km corrected to 20°c)	-
4.1, table 1 & 2 (a) Thickness of Polyster (mm))	-
4.1, table 1 & 3 (b) Thickness of Polypropylene (mm))	-
4.1, table 1 & 4 (c) Total thickness of Insulation(mm))	-
4.2 (Application of insulation)	-
4.3 (Colour of Insuation)	-
4.4 (Overall diameter (mm))	-
4 (Before ageing Tensile strength [N/mm²])	-
4 (Before ageing Elongation at break [Percentage])	-
4 (After ageing Tensile strength [N/mm²])	-
4 (Variation on tensile strangth [Percentage])	-
4 (After ageing Elongation at break [Percentage])	-
4 (Variation on elongation at break [Percentage])	-
4 (Shrinkage test [Percentage])	-
4 (After Shrinkage Cracks found.)	-
4.1 (Water absorption test [Gravimetric] [mg/cm²])	-
4.5 (High Voltage test [Water Immersion test] 3 KV for 1 Minute)	-
5 (The winding wire shall either be wound on spools / reels conforming to IS 482-1981. or supplied in a coils packed and labelled.)	-
6 (The winding wire shall carry following information marked on the lable on spool / reel / coil;)	-
6 (a) Reference to this Indian Standard;)	-
6 (b) Manufacturer's name,brand name or trade-mark;)	-
6 (c) Size of conductor / maximum overall diameter,)	-
6 (d) Length of conductor on spool / reel /coil;)	-
6 (e) Number of lengths onspool / reel / coil (if more than one);)	-
6 (f) Country of Manufacturer Marking)	-
6 (g) Year of Manufacture.)	-
6.2 (BIS Certification Mark)	-

-
The following test facilities for clauses are not available: Cl 4.1 Thickness of Insulation (Separate measurement of Thickness of Polypropylene and Polyester)

11659

BIS, Northern Regional Laboratory (NRL)

None

IS 1875 (1992)

Carbon steel billets, blooms, slabs and bars for forgings - Specification (Fifth Revision)

Rs.5400/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 8 (Diameter, Ovality & Weight)	-
Cl 9 (UTM & HBW)	-
Cl 7 (Workmanship)	-
6.1, 6.2 (carbon)	-
6.1, 6.2 (sulphur)	-
6.1, 6.2 (silicon )	-
6.1, 6.2 (manganese)	-
6.1, 6.2 (phosphorus)	-

-
Excluding Grain size, Microstructure,Microalloying Elements

11660

BIS, Western Regional Laboratory (WRL)

None

IS 8783 : Part 4 : Sec 1 (1995)

Winding wires for submersible motors - Specification: Part 4 specification for indmdual wires: Sec 1 HR PVC insulated wires (First Revision)

9300/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl.3.1 (Conductor)	-
Cl.4 (Material)	-
Cl.5.1.1 (Dimensions)	-
Cl. 6 (Annealing Test)	-
Cl 6 (Resistance Test)	-
Cl 4.1.2 (Visual examination)	-
Cl.3.2 (Dielectric Material )	-
Cl. 4 Table 1of IS: 8783 (part 2) (Volume resistivity)	-
Cl. 4 Table 1of IS: 8783 (part 2) (Volume resistivity)	-
Cl. 4 Table 1of IS: 8783 (part 2) (Tensile strength )	-
Cl. 4 Table 1of IS: 8783 (part 2) (Elongation)	-
Cl. 4 Table 1of IS: 8783 (part 2) (Tensile Strength)	-
Cl. 4 Table 1of IS: 8783 (part 2) (Variation)	-
Cl. 4 Table 1of IS: 8783 (part 2) (Elongation at Break )	-
Cl. 4 Table 1of IS: 8783 (part 2) (Variation)	-
Cl. 4 Table 1of IS: 8783 (part 2) (Shrinkage test )	-
Cl. 4 Table 1of IS: 8783 (part 2) (Shrinkage test )	-
Cl. 4 Table 1of IS: 8783 (part 2) (Water absorption (Gravimetric) )	-
Cl. 4 Table 1of IS: 8783 (part 2) (Hot deformation Test )	-
Cl. 4 Table 1of IS: 8783 (part 2) (Heat shock Test )	-
Cl.4.1 (Insulation )	-
Cl.4.2 (Application)	-
Cl.4.3 (Colour)	-
Cl.4.4 (Overall Diameter)	-
Cl.4.5 (Finish)	-
Cl.4.6 (High Voltage Test Water Immersion )	-

-
-

11661

BIS, Northern Regional Laboratory (NRL)

None

IS 1825 (1983)

Specification for aluminium alloy milk cans (Second Revision)

Rs 4800.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
8 (a) Rated Capacity)	-
8 (b) Point of Capacity)	-
8 (c) Batch OR Code No.)	-
8 (d) BIS Mark)	-
8 (e) Manufacturer's Trade Mark )	-
2 (Capacity)	-
4 Fig. 1 (Dimensions & Shape)	-
4 Fig. 1 (A)	-
4 Fig. 1 (B)	-
4 Fig. 1 (C )	-
4 Fig. 1 (D)	-
4 Fig. 1 (E)	-
4 Fig. 1 (F)	-
4 Fig. 1 (G)	-
4 Fig. 1 (H)	-
4 Fig. 1 (BOTTOM BAND)	-
4 Fig. 1 (Dimension)	-
4 Fig. 1 (Dimension)	-
4 Fig. 1 (Dimension)	-
4 Fig. 1 (Dimension)	-
4 Fig. 1 (Drain Holes )	-
4 Fig. 1 (HANDLE )	-
4 Fig. 1 (Dimension)	-
4 Fig. 1 (Dimension)	-
4 Fig. 1 (Dimension)	-
4 Fig. 1 (Dimension)	-
4 Fig. 1 (LID)	-
4 Fig. 1 (Dimension)	-
4 Fig. 1 (Dimension)	-
4 Fig. 1 (Dimension)	-
4 Fig. 1 (Dimension)	-
4 Fig. 1 (Dimension)	-
4 Fig. 1 (Dimension)	-
4 Fig. 1 (Dimension)	-
4 Fig. 1 (Hole Dia 8 ,2 holes)	-
4 Fig. 1 (Hole Dia 12, 3 holes)	-
5 (a)Transport cans shall consist of a body, bottom band)	-
5 (lid and handles.)	-
5 (b)Minimum Thickness(in mm))	-
5 (i) Body and Neck)	-
5 (ii) Bottom)	-
5 (iii) Lid (Inner))	-
5 (iv) Lid (Outer))	-
5 (c) Mode of Shaping)	-
5 (i) If the thickness at shoulder is less than 2.5 mm a )	-
5 (reinforcement ring of 2 mm thickness shall be provided.)	-
5 (ii) Brinell Hardness 85 HB Min.)	-
5 (d) BOTTOM BAND- It shall be shrunk fit with a )	-
5 (proper locking arrangement on the body. This shall)	-
5 (be followed by brazing or welding all round.)	-
5 (e) HANDLES (as per Cl 5.6))	-
5 (f) SEALING LUG (as per Cl 5.7))	-
5 (g)Workmanship and Finish- All brazing or welding shall )	-
5 (be sound , free of porosity and shall be finished smooth .)	-
5 (h) Mass 6.5 Kg. Min.)	-
7 (i) Air Pressure Test (Cl 7.1))	-
7 (ii) Drop Test (Cl 7.2))	-
7 (iii) The cans when filled with water and inverted shall not show any profuse leakage through lids. )	-

-
Test facility is complete, Facility for chemical testing is not available

11662

BIS, Eastern Regional Laboratory (ERL)

None

IS 15911 (2010)

Structural steel (Ordinary Quality) - Specification

All grades

Rs 6750/- For elements other than Table-1: Rs 1004/- pe View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Table-1, 5.1, 8.1 & 8.2 (Carbon: Relevant parts of IS 228 or any other established instrumental/chemical method)	-
Table-1, 5.1, 8.1 & 8.2 (Sulphur: Relevant parts of IS 228 or any other established instrumental/chemical method)	-
Table-1, 5.1, 8.1 & 8.2 (Phosphorous: Relevant parts of IS 228 or any other established instrumental/chemical method)	-
Table-1, 5.1, 8.1 & 8.2 (Manganese: Relevant parts of IS 228 or any other established instrumental/chemical method)	-
Table-1, 5.1, 8.1 & 8.2 (Silicon: Relevant parts of IS 228 or any other established instrumental/chemical method)	-
Table-1, 5.1, 8.1 & 8.2 (Copper: Relevant parts of IS 228 or any other established instrumental/chemical method)	-
Table-1, 5.1, 8.1 & 8.2 (Nitrogen: Relevant parts of IS 228 or any other established instrumental/chemical method)	-
5 and 10.3.1 (Tensile strength. IS 1608)	-
5 and 10.3.1 (Yield Stress. IS 1608)	-
5 and 10.3.1 (Percentage Elongation. . IS 1608)	-
11.3 ( Bend Test. IS 1599)	-
Cl 12 of IS 15911 and Table 2.1 of IS 808 (D)	-
Cl 12 of IS 15911 and Table 2.1 of IS 808 (B)	-
Cl 12 of IS 15911 and Table 2.1 of IS 808 (t)	-
Cl 12 of IS 15911 and Table 2.1 of IS 808 (R1)	-
Cl 12 of IS 15911 and Table 2.1 of IS 808 (R2)	-
Cl 12 of IS 15911 and Table 2.2 of IS 808 (Mass. IS 808)	-
7 (Freedom from defects)	-
Cl 12 of IS 15911 and Table 1 of IS 1732 (Clauses 3.1, 4.1,4.1.1 and Table 1 of IS 1732)	-
Cl 12 of IS 15911 and Table 2 of IS 1732 (Clauses 3.1, 4.1,4.1.1 and Table 1 of IS 1732)	-
Cl 12 of IS 15911 and Table 2 of IS 1863 (Clauses 5.1 and Table 2 of IS 1863)	-
Cl 12 of IS 15911 and Table 1 of IS 3954 (Clauses 4, 6.1 and Table 2 of IS 3954)	-
Cl 12 of IS 15911 and Table 1 of IS 1173 (Clauses 3.1 , 5.1 and Table 1 of IS 1173)	-
Cl 12 of IS 15911 and Table 1 of IS 1252 (Clauses 4.1 , 6.1 and Table 1 of IS 1252)	-

-
Chem- C, S, P, Mn, Si, Cu & N can only be carried out.Grade designation to be declared.

11663

BIS, Northern Regional Laboratory (NRL)

None

IS 4224 (1972)

Specification for steel wire for staples, pins and clips (First Revision)

525 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5 (Sizes and Tolerances - IS 4224)	-
7.1 (Tensile Test - IS 1608(Pt -1))	-
4 (Freedom from defects , IS 4224)	-
7.2 (Reverse Bend Test--IS 1716)	-

-
Test facility is complete

11664

BIS, Western Regional Laboratory (WRL)

None

IS 7098 : Part 1 (1988)

Specification for crosslinked polyethylene insulated pvc sheathed cables: Part 1 for working voltages up to and including 1100 volts (First Revision)

Except C1 & C2 category.

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3 (CONDUCTOR: MATERIALS)	-
4 (INSULATION : MATERIALS)	-
5.1 (FILLER AND INNER SHEATH)	-
5.2 (FILLER AND INNER SHEATH)	-
6 (ARMOURING)	-
7 (OUTER SHEATH)	-
8.1 (CONDUCTOR: CONSTRUCTION)	-
8.2 (PROTECTIVE BARRIER)	-
8.3 (SIZE OF NEUTRAL CONDUCTOR)	-
9.1 (Insulation Applied by extrusicn)	-
9.2 (Thickness of Insulation - Average)	-
9.3 (Thickness of Insulation - Minimum)	-
9.4 (Application of Insulation)	-
10.1 (Core Identification)	-
10.2 (Core Identification- Neutral)	-
10.3 (Core Identification by number )	-
10.4 (Core Identification by number - Neutral )	-
11 (LAVING UP OF CORES)	-
12.1 & 12.2 (Inner sheath : Application)	-
12.3 (Thickness of Inner Sheath)	-
13.1 (Armouring: Application)	-
13.1.2 (Armouring: Coverage )	-
13.1.3 (Armouring: Direction of Lay )	-
13.2 (Type of armour )	-
13.3 (Armouring : Dimensions -Wire Diameter)	-
13.4 (Armour: Joint)	-
13.5 (Armouring : Resistance Test)	-
13.6 a) (ARMOURING: Tensile Strength)	-
13.6 b) (ARMOURING: Elongation )	-
13.6 c) (ARMOURING: Torsion Test (For round wire ) )	-
13.6 d) (ARMOURING: Winding Test(For formed wire))	-
13.6 e) (ARMOURING: Uniformity of zinc coating)	-
13.6 f) (ARMOURING: Mass of zinc coating )	-
13.6 g) (ARMOURING: Resistivity)	-
14.1 (Outer Sheath : Application)	-
14.2 (Colour of outer sheath)	-
14.3 (Thickness of outer sheath - AVERAGE)	-
14.3 (Thickness of outer sheath - minimum)	-
15.1 a) i) (Annealing Test ( For copper wire ) )	-
15.1 a) ii) (Tensile test (for aluminium) - Before stranding )	-
15.1 a) ii) (Tensile test (for aluminium) - After stranding )	-
15.1 a) iii) (Wrapping test (for aluminium))	-
15.1 a) iv) (Resistance test - Main conductor)	-
15.1 a) iv) (Resistance test - Neutral conductor)	-
15.1 d) i) (Phyaical tests for insulation : Tensile Test)	-
15.1 d) i) (Phyaical tests for insulation : Elongation)	-
15.1 d) ii) (Phyaical tests for insulation - Ageing in air Oven : Tensile Variation )	-
15.1 d) ii) (Phyaical tests for insulation- Ageing in air oven : Elongation Variation )	-
15.1 d) iii) (Phyaical tests for insulation : Hot set )	-
15.1 d) iii) (Phyaical tests for insulation : Permanent set )	-
15.1 d) iv) (Phyaical tests for insulation : Shrinkage )	-
15.1 d) iv) (Phyaical tests for insulation : Shrinkage - Crack observed )	-
15.1 d) v) (Insulation: Waterabsorption(gravimetric))	-
15.1 e) i) (Physical tests for outer sheath : Tensile stregth)	-
15.1 e) i) (Physical tests for outer sheath : Elongation)	-
15.1 e) ii) (Physical tests for outer sheath- Ageing in air oven : Tensile stregth )	-
15.1 e) ii) (Physical tests for outer sheath -Ageing in air oven : Elongation )	-
15.1 e) ii) (Physical tests for outer sheath- Ageing in air oven : Tensile stregth Variation )	-
15.1 e) ii) (Physical tests for outer sheath -Ageing in air oven : Elongation )	-
15.1 e) iii) (Sheath: Loss of mass in air oven)	-
15.1 e) iv) (Phyaical tests for Sheath : Shrinkage )	-
15.1 e) iv) (Phyaical tests for Sheath : Shrinkage - Crack observed )	-
15.1 e) v) (Sheath : Hot deformation)	-
15.1 e) vi) (Sheath : Heat shock test)	-
15.1 e) vii) (Sheath : Thermalstability)	-
15.1 f) (INSULATION RESISTANCE TEST : Volume resistivity )	-
16.2 (HIGH VOLTAGE TEST )	-
16.3 (FLAMMABILITY TEST : Period of Burning )	-
16.3 (FLAMMABILITY TEST : Unaffected length )	-
17.1 (Manufacturer'. identification)	-
17.2 (cable Indentification )	-
17.3 (cable Code )	-
15.1 e) ii) (Physical tests for outer sheath -Ageing in air oven : Elongation Variation )	-

-
Test facility not available for tests as per Clause 15.1.1 of C1 and C2 category

11665

BIS, Western Regional Laboratory (WRL)

None

IS 4250 (1980)

Specification for domestic electric food - Mixers (Liquidizers And Grinders) (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6 (Classification- IS 302-1 )	-
6 (Classification- IS 302-1)	-
7.1 (Marking- IS 302-1)	-
7.1 (Marking- IS 302-1)	-
7.1 (Marking- IS 302-1)	-
7.1 (Marking- IS 302-1)	-
7.1 (Marking- IS 302-1)	-
7.1 (Marking- IS 302-1)	-
7.1 (Marking- IS 302-1)	-
7.1 (Marking- IS 302-1)	-
7.1 (Marking- IS 302-1)	-
7.1 (Marking- IS 302-1)	-
7.1 (Marking- IS 302-1)	-
7.1 (Marking- IS 302-1)	-
7.1 (Marking- IS 302-1)	-
7.2 (Marking)	-
7.1 (Marking- IS 302-1)	-
7.1 (Marking- IS 302-1)	-
7.1 (Marking- IS 302-1)	-
7.4 (Marking)	-
7.5 (Marking)	-
7.6 (Marking)	-
8 ( Protection Against Electric Shock, IS 302-1)	-
9 (Starting, IS 302-1)	-
10 (Power Input and Current, IS 302-1)	-
11 (Heating, IS 302-1)	-
11 (Heating, IS 302-1)	-
11 (Heating, IS 302-1)	-
11 (Heating, IS 302-1)	-
11 (Heating, IS 302-1)	-
13 (Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-
13 (Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-
15.1 (Moisture Resistance, IS 302-1)	-
15.2 (Moisture Resistance-Spillage test)	-
15 (Moisture Resistance, IS 302-1)	-
16 (Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-
16 (Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-
19 (Abnormal Operation, IS 302-1)	-
19 (Abnormal Operation, IS 302-1)	-
19 (Abnormal Operation, IS 302-1)	-
19 (Abnormal Operation, IS 302-1)	-
20 (Stability & Mechanical Hazards, IS 302-1)	-
20 (Stability & Mechanical Hazards, IS 302-1)	-
21 (Mechanical Strength, IS 302-1)	-
21 (Mechanical Strength, IS 302-1)	-
22.1 (Construction, IS 302-1)	-
22.2 (Construction)	-
22.3 (Construction)	-
22.4 (Construction)	-
22.5 (Construction)	-
22.6 (Construction)	-
22.8 (Construction)	-
22.9 (Construction)	-
22.1 (Construction)	-
23 (Internal Wiring, IS 302-1)	-
23 (Internal Wiring, IS 302-1)	-
23 (Internal Wiring, IS 302-1)	-
23 (Internal Wiring, IS 302-1)	-
23 (Internal Wiring, IS 302-1)	-
23 (Internal Wiring, IS 302-1)	-
23 (Internal Wiring, IS 302-1)	-
23 (Internal Wiring, IS 302-1)	-
23 (Internal Wiring, IS 302-1)	-
23 (Internal Wiring, IS 302-1)	-
24.1 (Components, IS 302-1)	-
24.1 (Components, IS 302-1)	-
24.1 (Components, IS 302-1)	-
24.2 (Components)	-
24.4 (Components)	-
24.7 (Components)	-
24.8 (Components)	-
24.9 (Components)	-
25 (Supply Connection and External Flexible Cords, IS 302-1)	-
25 (Supply Connection and External Flexible Cords, IS 302-1)	-
25 (Supply Connection and External Flexible Cords, IS 302-1)	-
25 (Supply Connection and External Flexible Cords, IS 302-1)	-
25 (Supply Connection and External Flexible Cords, IS 302-1)	-
25 (Supply Connection and External Flexible Cords, IS 302-1)	-
25 (Supply Connection and External Flexible Cords, IS 302-1)	-
25 (Supply Connection and External Flexible Cords, IS 302-1)	-
25 (Supply Connection and External Flexible Cords, IS 302-1)	-
25 (Supply Connection and External Flexible Cords, IS 302-1)	-
25 (Supply Connection and External Flexible Cords, IS 302-1)	-
25 (Supply Connection and External Flexible Cords, IS 302-1)	-
25 (Supply Connection and External Flexible Cords, IS 302-1)	-
25 (Supply Connection and External Flexible Cords, IS 302-1)	-
25 (Supply Connection and External Flexible Cords, IS 302-1)	-
25 (Supply Connection and External Flexible Cords, IS 302-1)	-
25 (Supply Connection and External Flexible Cords, IS 302-1)	-
25 (Supply Connection and External Flexible Cords, IS 302-1)	-
25 (Supply Connection and External Flexible Cords, IS 302-1)	-
25 (Supply Connection and External Flexible Cords, IS 302-1)	-
25 (Supply Connection and External Flexible Cords, IS 302-1)	-
25 (Supply Connection and External Flexible Cords, IS 302-1)	-
26 (Terminals for External Conductors, IS 302-1)	-
27 (Provision for Earthing, IS 302-1)	-
27 (Provision for Earthing, IS 302-1)	-
27 (Provision for Earthing, IS 302-1)	-
27 (Provision for Earthing, IS 302-1)	-
27 (Provision for Earthing, IS 302-1)	-
28 (Screws & Connections, IS 302-1)	-
29 (Clearances and Distances through Insulation, IS 302-1)	-
29 (Clearances and Distances through Insulation, IS 302-1)	-
30 (Resistance to Heat, Fire, Tracking, IS 302-1)	-
30 (Resistance to Heat, Fire, Tracking, IS 302-1)	-
31 (Resistance of Rusting, IS 302-1)	-
34.2 (Operational tests- Grinding coffee (for machines which have a dry grinding arrangement))	-
34.2 (Operational tests- Grinding coffee (for machines which have a dry grinding arrangement))	-
34.2 (Operational tests- Grinding coffee (for machines which have a dry grinding arrangement))	-
34.3 (Whisking egg whites )	-
34.4 (IDLI batter-Grinding of black gram)	-
34.4 (IDLI batter-Grinding of rice)	-
34.4 (IDLI batter-Grinding of rice)	-
34.4 (IDLI batter-Grinding of rice)	-
34.5.1 (a) (Operational test for juicers )	-
34.5.1 (b) (Operational test for juicers )	-
34.5.2 (Operational test for juicers )	-
35 (Temperature withstand test for bowl)	-
36 (Test for controls )	-
37 (Strength of Assembly )	-
37 (Strength of Assembly )	-

-
The following test facilities are not available: 1. Cl.14 Transient Overvoltage test (as per IS 302-1) 2. Cl.19.11 and 19.12 Abnormal Operation test (as perIS 302-1) (for electronic circuit) 3. Cl 24 component test as per IS302-1

11666

BIS, Northern Regional Laboratory (NRL)

None

IS 7098 : Part 1 (1988)

Specification for crosslinked polyethylene insulated pvc sheathed cables: Part 1 for working voltages up to and including 1100 volts (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
16.13 (Test for Halogen Acid Gas Evolution)	-
3 (CONDUCTOR: MATERIALS)	-
4 (INSULATION : MATERIALS)	-
5.1 (FILLER AND INNER SHEATH)	-
5.2 (FILLER AND INNER SHEATH)	-
6 (ARMOURING)	-
7 (OUTER SHEATH)	-
8.1 (CONDUCTOR: CONSTRUCTION)	-
8.2 (PROTECTIVE BARRIER)	-
8.3 (SIZE OF NEUTRAL CONDUCTOR)	-
9.1 (Insulation Applied by extrusicn)	-
9.2 (Thickness of Insulation - Average)	-
9.3 (Thickness of Insulation - Minimum)	-
9.4 (Application of Insulation)	-
10.1 (Core Identification)	-
10.2 (Core Identification- Neutral)	-
10.3 (Core Identification by number )	-
10.4 (Core Identification by number - Neutral )	-
11 (LAVING UP OF CORES)	-
12.1 & 12.2 (Inner sheath : Application)	-
12.3 (Thickness of Inner Sheath)	-
13.1 (Armouring: Application)	-
13.1.2 (Armouring: Coverage )	-
13.1.3 (Armouring: Direction of Lay )	-
13.2 (Type of armour )	-
13.3 (Armouring : Dimensions -Wire Diameter)	-
13.3 (Armouring : Dimensions -Formed wire )	-
13.4 (Armour: Joint)	-
13.5 (Armouring : Resistance Test)	-
13.6 a) (ARMOURING: Tensile Strength)	-
13.6 b) (ARMOURING: Elongation )	-
13.6 c) (ARMOURING: Torsion Test (For round wire ) )	-
13.6 d) (ARMOURING: Winding Test(For formed wire))	-
13.6 e) (ARMOURING: Uniformity of zinc coating)	-
13.6 f) (ARMOURING: Mass of zinc coating )	-
13.6 g) (ARMOURING: Resistivity)	-
14.1 (Outer Sheath : Application)	-
14.2 (Colour of outer sheath)	-
14.3 (Thickness of outer sheath - AVERAGE)	-
14.3 (Thickness of outer sheath - minimum)	-
15.1 a) i) (Annealing Test ( For copper wire ) )	-
15.1 a) ii) (Tensile test (for aluminium) - Before stranding )	-
15.1 a) ii) (Tensile test (for aluminium) - After stranding )	-
15.1 a) iii) (Wrapping test (for aluminium))	-
15.1 a) iv) (Resistance test - Neutral conductor)	-
15.1 a) iv) (Resistance test - Main conductor)	-
15.1 a) iv) (Resistance test - Neutral conductor)	-
15.1 d) i) (Phyaical tests for insulation : Tensile Test)	-
15.1 d) i) (Phyaical tests for insulation : Elongation)	-
15.1 e) ii) (Physical tests for outer sheath- Ageing in air oven : Tensile stregth )	-
15.1 d) ii) (Phyaical tests for insulation - Ageing in air Oven : Tensile Variation )	-
15.1 d) ii) (Phyaical tests for insulation- Ageing in air oven : Elongation Variation )	-
15.1 e) ii) (Physical tests for outer sheath -Ageing in air oven : Elongation Variation )	-
15.1 d) iii) (Phyaical tests for insulation : Hot set )	-
15.1 d) iii) (Phyaical tests for insulation : Permanent set )	-
15.1 d) iv) (Phyaical tests for insulation : Shrinkage )	-
15.1 d) iv) (Phyaical tests for insulation : Shrinkage - Crack observed )	-
15.1 d) v) (Insulation: Waterabsorption(gravimetric))	-
15.1 e) i) (Physical tests for outer sheath : Tensile stregth)	-
15.1 e) i) (Physical tests for outer sheath : Elongation)	-
15.1 e) ii) (Physical tests for outer sheath- Ageing in air oven : Tensile stregth )	-
15.1 e) ii) (Physical tests for outer sheath -Ageing in air oven : Elongation )	-
15.1 e) ii) (Physical tests for outer sheath- Ageing in air oven : Tensile stregth Variation )	-
15.1 e) ii) (Physical tests for outer sheath -Ageing in air oven : Elongation Variation )	-
15.1 e) iii) (Sheath: Loss of mass in air oven)	-
15.1 e) iv) (Phyaical tests for Sheath : Shrinkage )	-
15.1 d) iv) (Phyaical tests for insulation : Shrinkage )	-
15.1 e) iv) (Phyaical tests for Sheath : Shrinkage )	-
15.1 e) iv) (Phyaical tests for Sheath : Shrinkage - Crack observed )	-
15.1 e) v) (Sheath : Hot deformation)	-
15.1 e) vi) (Sheath : Heat shock test)	-
15.1 e) vii) (Sheath : Thermalstability)	-
15.1 f) (INSULATION RESISTANCE TEST : Volume resistivity )	-
16.2 (HIGH VOLTAGE TEST )	-
16.3 (FLAMMABILITY TEST : Period of Burning )	-
16.2 (HIGH VOLTAGE TEST )	-
16.3 (FLAMMABILITY TEST : Period of Burning )	-
16.3 (FLAMMABILITY TEST : Unaffected length )	-
16.9 (Oxygen Index Test)	-
16.1 (Flame Retardance Test on Single Cables)	-
16.11 (Flame Retardance Test on Bunched Cables)	-
16.14 (Temperature Index)	-
17.1 (Manufacturer'. identification)	-
17.2 (cable Indentification )	-
17.3 (cable Code )	-

-
Test facility is complete

11667

BIS, Western Regional Laboratory (WRL)

None

IS 3975 (1999)

Low carbon galvanized steel wires, formed wires and tapes for armouring of cables - Specification (Third Revision)

Rs 2700/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Clause 6.1, Table-1 (Sulphur)	-
Clause 6.1, Table-1 (Phosphorus)	-
9.1 (Galvanizing Requirements )	-
14 (a) (Marking)	-
14 (b) (Marking)	-
14 (c) (Marking)	-
14 (d) (Marking)	-
14 (e) (Marking)	-
14 (f) (Marking)	-
14 (g) (Marking)	-
14.2 (Marking)	-
7 (Dimensions)	-
7 (Dimensions)	-
7 (Dimensions)	-
7 (Dimensions)	-
7 (Dimensions)	-
11 (Freedom from defects)	-
9.1 (Galvanizing Requirements )	-
9.2 (Galvanizing Requirements )	-
9.3 (Galvanizing Requirements )	-
8.1 (Mechanical Properties (as per table 5 of IS 1608))	-
8.1 (Mechanical Properties (as per table 5 of IS 1608))	-
8.2 (Mechanical Properties (as per IS 1717))	-
8.3 (Mechanical Properties (as per IS 1755))	-
8.4 (Mechanical Properties (as per IS 10810(Part- 42)))	-
14 (Marking)	-
14 (b) (Marking)	-

-
Test facility not available for the following: 1) Dimension radius R of formed wire.

11668

BIS, Central Laboratory (CL)

None

IS 12176 (1987)

Specification for sweetened ultra high temperature (UHT) treated condensed milk

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1.10.1 (Bacterial spores ( plate count ))	-
4.1.10.2 (Coliform count)	-
4.1.10.3 (Coagulase positive Staphylococcus aureus)	-

-
-Animal House; Excluding -MEASUREMENT OF SIZE AND COUNT OF LACTOSE CRYSTALS, Cl. 4.1.10.1;

11669

BIS, Western Regional Laboratory (WRL)

None

IS 2465 (1984)

Specification for cables for motor vehicles (Second Revision)

Complete test facility for PVC Insulated General Wiring

Single core PVC Insulated Unsheathed: Rs. 11030/- View breakup
Single core PVC Insulated Sheathed: 75 % additional for sheath. Multi core with PVC Sheath: 75% additional for each additional core. Round and flat tinned copper braids without further covering for earthing: Rs. 1115/- Above charges are excluding Material tests, Ageing in oxygen bomb, Capacitance test, Ozone resistance test, Effect of heat on flexibility, Effect of oils, Effect of lubricating oil, brake fluid, diesel and petrol, Effect of cooling on flexibility.

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
7.1 (Insulation)	-
7.3 (Insulation)	-
8 (Core Identification)	-
9 (Laying up of cores)	-
10.1.1 (Sheathing )	-
10.2 (Sheathing )	-
3 & 6 (Flexibility class)	-
3 & 6 (Construction)	-
3 & 6 (Diameter of wire(mm))	-
3 & 6 (Annealing test)	-
3 & 6 (Persulphate Test)	-
3 & 6 (Conductor resistance Test (ohm/km at 20˚c))	-
7.2, 10.3, 11 (Dimensions & thickness )	-
7.2, 10.3, 11 (Dimensions & thickness )	-
7.2, 10.3, 11 (Overall Dimension (mm))	-
4.2 & 12.1 (Without Ageing For Insulation Tensile Strength (N/mm²))	-
4.2 & 12.1, (f), 1 (elongation at break (N/mm²))	-
4.2 & 12.1, (f), 1 (Tensile Strength at break (N/mm²))	-
4.2 & 12.1, (e), 1 (elongation test at break)	-
4.2 & 12.1, (e), 1 (Tensile strength at break)	-
4.2 & 12.1, (f), 2 (Ageing in air oven)	-
4.2 & 12.1, (f), 3 (Ageing in oxygen bomb)	-
4.2 & 12.1, (e), 2 (After Ageing in air oven)	-
4.2 & 12.1, (e), 3 (Loss of mass test (mg/cm²) of Insulation)	-
4.2 & 12.1, (e), 3 (Loss of mass test (mg/cm²) of Sheath)	-
4.2 & 12.1, (e), 4 (Hot deformation test (%) of Insulation)	-
14 (High Voltage Test)	-
15 (SPARK TEST FOR SINGLE CORE GENERAL WIRING CABLES)	-
18.1 (EFFECT OF HEAT ON FLEXIBILITY FOR IGNITION CABLES)	-
19.2 (EFFECT OF OIL ON IGNITION CABLES)	-
20.3 (EFFECT OF LUBRICATING OIL)	-
20.3 (EFFECT OF LUBRICATING OIL)	-
20.3 (EFFECT OF BRAKE FLUID)	-
20.3 (EFFECT OF BRAKE FLUID)	-
20.3 (EFFECT OF DIESEL)	-
20.3 (EFFECT OF DIESEL)	-
20.3 (Wrapping test)	-
21.1 (EFFECT OF COOLING ON FLEXIBILITY)	-
21.2 (EFFECT OF COOLING ON FLEXIBILITY)	-
21.2 (EFFECT OF COOLING ON FLEXIBILITY)	-
22.1 (FLAMMABILITY TEST)	-
22.1 (FLAMMABILITY TEST)	-
23.1 (Manufacturer's Identification)	-
23.1 (Manufacturer's Identification)	-
24.1 (PACKING AND MARKING)	-
24.2 (PACKING AND MARKING)	-
24.2.1 (PACKING AND MARKING)	-
4.2 & 12.1, (e), 4 (Hot deformation test (%) of Sheath)	-
4.2 & 12.1, (e), 5 (Heat Shock Test of Insulation)	-
4.2 & 12.1, (e), 5 (Heat Shock Test of Sheath)	-
4.2 & 12.1, (e), 6 (Shrinkage Test (%) of Insulation)	-
4.2 & 12.1, (e), 6 (Shrinkage Test (%) of Sheath)	-

-
The following test facilities for ignition cables are not available: Cl 16 Capacitance, Cl 17 Ozone resistance, Cl 18 Effect of heat on flexibility, Cl 19 Effect of Oil test

11670

BIS, Western Regional Laboratory (WRL)

None

IS 1293 (2019)

Plugs and socket - Outlets of rated Voltage up to and including 250 Volts and rated current up to and including 16 amperes - Specification (Third Revision)

UP TO 16A, 250V

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6 (RATINGS)	-
7.1.1 (Accessories Classification)	-
7.1.2 (Accessories Classification)	-
7.1.3 (Accessories Classification)	-
7.1.4 (Accessories Classification)	-
7.1.5 (Accessories Classification)	-
7.2.1 (Socket-Outlets Classification)	-
7.2.2 (Socket-Outlets Classification)	-
7.2.3 (Socket-Outlets Classification)	-
7.2.4 (Socket-Outlets Classification)	-
7.3 (Plug Classification)	-
8 (Marking)	-
9 (CHECKING OF DIMENSIONS)	-
10 (PROTECTION AGAINST ELECTRIC SHOCK)	-
11 (Provision for earthing)	-
12 (terminals)	-
13.1 (Construction of fixed Socket Outlets)	-
13.2 (Construction of fixed Socket Outlets)	-
13.3 (Construction of fixed Socket Outlets)	-
13.4 (Construction of fixed Socket Outlets)	-
13.5 (Construction of fixed Socket Outlets)	-
13.6 (Construction of fixed Socket Outlets)	-
13.7 (Construction of fixed Socket Outlets)	-
13.8 (Construction of fixed Socket Outlets)	-
13.9 (Construction of fixed Socket Outlets)	-
13.10 (Construction of fixed Socket Outlets)	-
13.11 (Construction of fixed Socket Outlets)	-
13.12 (Construction of fixed Socket Outlets)	-
13.13 (Construction of fixed Socket Outlets)	-
13.14 (Construction of fixed Socket Outlets)	-
13.15 (Construction of fixed Socket Outlets)	-
13.16 (Construction of fixed Socket Outlets)	-
13.17 (Construction of fixed Socket Outlets)	-
13.18 (Construction of fixed Socket Outlets)	-
13.19 (Construction of fixed Socket Outlets)	-
13.2 (Construction of fixed Socket Outlets)	-
13.21 (Construction of fixed Socket Outlets)	-
13.22 (Construction of fixed Socket Outlets)	-
13.23 (Construction of fixed Socket Outlets)	-
14.1 (CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-
14.2 (CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-
14.3 (CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-
14.4 (CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-
14.5 (CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-
14.6 (CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-
14.7 (CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-
14.8 (CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-
14.9 (CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-
14.10 (CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-
14.11 (CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-
14.12 (CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-
14.13 (CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-
14.14 (CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-
14.15 (CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-
14.16 (CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-
14.17 (CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-
14.18 (CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-
14.19 (CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-
14.20 (CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-
14.21 (CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-
14.22 (CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-
14.23 (CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-
14.24 (CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-
14.25 (CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-
14.26 (CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-
15 (INTERLOCKED SOCKET-OUTLETS)	-
16.1 (Resistance to Ageing)	-
16.2 (RESISTANCE TO HARMFUL INGRESS OF WATER AND TO HUMIDITY)	-
16.3 (Resistance to Humidity)	-
17.1 (RESISTANCE AND ELECTRIC STRENGTH)	-
17.2 (INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-
17.3 (INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-
18 (OPERATION OF EARTHING CONTACTS)	-
19 (TEMPERATURE RISE)	-
20 (Making & Breaking Capacity)	-
21 (Normal Operation)	-
22.1 (Verification of the Maximum Withdrawal Force)	-
22.2 (Verification of Minimum Withdrawal Force)	-
23.1 (FLEXIBLE CABLES AND THEIR CONNECTION)	-
23.2 (FLEXIBLE CABLES AND THEIR CONNECTION)	-
23.3 (FLEXIBLE CABLES AND THEIR CONNECTION)	-
23.4 (FLEXIBLE CABLES AND THEIR CONNECTION)	-
24.1 (MECHANICAL STRENGTH For all kinds of fixed socketoutlets)	-
24.1 (MECHANICAL STRENGTH For portable multiple and combined socket outlets with enclosures, covers or bodies other than thermoplastic or elastomeric material)	-
24.1 (MECHANICAL STRENGTH For surface mounting boxes)	-
24.2 (MECHANICAL STRENGTH For portable single socket-outlets: 1) with enclosures, covers or bodies other than thermoplastic or elastomeric material)	-
24.2 (MECHANICAL STRENGTH For portable multiple and combined socket outlets: 1) with enclosures, covers and bodies of elastomeric or thermoplastic material)	-
24.2 (MECHANICAL STRENGTH For plug 1) with enclosures, covers and bodies of elastomeric or thermoplastic material)	-
24.2 (MECHANICAL STRENGTH For plug 1) with enclosures, covers and bodies of elastomeric or thermoplastic material)	-
24.3 (MECHANICAL STRENGTH for fixed socket-outlets with a main part intended to be mounted directly on a surface)	-
24.4 (MECHANICAL STRENGTH For portable single socket-outlets: 1) with enclosures, covers or bodies of thermoplastic or elastomeric material)	-
24.4 (MECHANICAL STRENGTH For portable multiple and combined socket outlets: 1) with enclosures, covers and bodies of elastomeric or thermoplastic material)	-
24.5 (MECHANICAL STRENGTH For portable single socket-outlets: 1) with enclosures, covers or bodies of thermoplastic or elastomeric material)	-
24.5 (MECHANICAL STRENGTH For portable multiple and combined socket outlets: 1) with enclosures, covers and bodies of elastomeric or thermoplastic material)	-
24.5 (MECHANICAL STRENGTH For Plug 1) with enclosures, covers and bodies of elastomeric or thermoplastic material)	-
24.6 (MECHANICAL STRENGTH For screwed glands of accessories having an IP code higher than IP20)	-
24.7 (MECHANICAL STRENGTH For plug pins provided with insulating sleeves)	-
24.8 (MECHANICAL STRENGTH For shuttered socketoutlets)	-
24.9 (MECHANICAL STRENGTH For portable multiple and combined socket outlets (1) with enclosures, covers or bodies other than thermoplastic or elastomeric material)	-
24.9 (MECHANICAL STRENGTH For portable multiple and combined socket outlets (1) with enclosures, covers or bodies other than thermoplastic or elastomeric material)	-
24.10 (MECHANICAL STRENGTH For Plug (1) with enclosures, covers or bodies other than thermoplastic or elastomeric material)	-
24.10 (MECHANICAL STRENGTH For Plug (1) with enclosures, covers or bodies of thermoplastic or elastomeric material)	-
24.11 (MECHANICAL STRENGTH For portable socketoutlets having means for suspension on a wall)	-
24.12 (MECHANICAL STRENGTH For portable socketoutlets having means for suspension on a wall)	-
24.13 (MECHANICAL STRENGTH For portable socketoutlets having means for suspension on a wall)	-
24.14.1 (MECHANICAL STRENGTH For fixed socket-outlets)	-
24.14.2 (MECHANICAL STRENGTH For fixed socket-outlets)	-
24.14.3 (MECHANICAL STRENGTH For plugs and portable socketoutlets)	-
24.15 (MECHANICAL STRENGTH)	-
24.16 (MECHANICAL STRENGTH)	-
24.16 (MECHANICAL STRENGTH For shroud of portable socket-outlets)	-
25.1 (Resistance to heat)	-
25.2 (Resistance to heat)	-
25.3 (Resistance to heat)	-
25.4 (Resistance to heat)	-
26.1 (SCREWS, CURRENTCARRYING PARTS AND CONNECTIONS)	-
26.2 (SCREWS, CURRENTCARRYING PARTS AND CONNECTIONS)	-
26.3 (SCREWS, CURRENTCARRYING PARTS AND CONNECTIONS)	-
26.4 (SCREWS, CURRENTCARRYING PARTS AND CONNECTIONS)	-
26.5 (SCREWS, CURRENTCARRYING PARTS AND CONNECTIONS)	-
26.6 (SCREWS, CURRENTCARRYING PARTS AND CONNECTIONS)	-
26.7 (SCREWS, CURRENTCARRYING PARTS AND CONNECTIONS)	-
27.1 (CREEPAGE DISTANCES, CLEARANCES AND DISTANCES THROUGH SEALING COMPOUND)	-
27.2 (CREEPAGE DISTANCES, CLEARANCES AND DISTANCES THROUGH SEALING COMPOUND)	-
27.3 (CREEPAGE DISTANCES, CLEARANCES AND DISTANCES THROUGH SEALING COMPOUND)	-
28.1.1 (Glow-Wire Test)	-
28.2 (Resistance to Tracking)	-
29 (Resistance to Rusting)	-
30.1 (ADDITIONAL TESTS ON PINS PROVIDED WITH INSULATING SLEEVES Pressure Test at High Temperature)	-
30.2 (ADDITIONAL TESTS ON PINS PROVIDED WITH INSULATING SLEEVES Static Damp Heat Test)	-
30.3 (ADDITIONAL TESTS ON PINS PROVIDED WITH INSULATING SLEEVES Tests at Low Temperature)	-
30.4 (ADDITIONAL TESTS ON PINS PROVIDED WITH INSULATING SLEEVES Impact Test at Low Temperature)	-
8 (Marking)	-

-
Complete Test facility available

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number