| 12061 |
PIONEER TESTING LABORATORY PRIVATE LIMITED
| 8176806
| IS 1237 (2012) |
Cement Concrete Flooring Tiles - Specification |
All Type |
7200 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl 7.1(Length, Breadth, Minimum thickness, Difference in length of side between the longest side and shorterst side, Half tiles, Difference in Thickness between the thickest and thinnest tile, Thickness of wearing layer) |
- |
1200 |
|
- |
| Cl 12.2(Concavity & Convexity ) |
- |
500 |
|
- |
| Cl 12.3(The Maximum gap between the arms of the square and the edge of the title shall notexceed 2 percent of the length.) |
- |
500 |
|
- |
| Cl 12.4(Shall not exceed 1 percent of the length of the edge.) |
- |
500 |
|
- |
| Cl 12.5(Water absorption) |
- |
1000 |
|
- |
| Cl 12.6(Wet transverse strength ) |
- |
1500 |
|
- |
| Cl 12.7(Resistance to wear) |
- |
1500 |
|
- |
| Cl 11(Suface Finish) |
- |
500 |
|
- |
|
10 Mar, 2030 |
-
- |
| 12062 |
CENTRAL INSTITUTE OF PETROCHEMICALS ENGINEERING & TECHNOLOGY (CIPET) : IPT-BHUBANESWAR
| 5102634
| IS 6192 (2023) |
Textiles Monoaxially oriented high density polyethylene HDPE and polypropylene PP tapes Specification |
Pigmented/Unpigmented tapes |
25138 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4(MATERIAL(Refer IS 7328 :1974)) |
- |
1150.00 |
|
- |
| 5.1(Linear density (For test method Refer IS 6193:1971 and IS 7703 Part 1)) |
- |
525 |
|
- |
| 5.2(Tenacity (For test method Refer IS 6193:1971)) |
- |
825 |
|
- |
| 5.3(Elongation (For test method Refer IS 6193:1971)) |
- |
975 |
|
- |
| 5.4(Finished width (For test method Refer IS 6193:1971)) |
- |
375 |
|
- |
| 5.5(Thickness (For test method Refer IS 6193:1971)) |
- |
375 |
|
- |
| 5.6(Heat Shrinkage at 60 degree C(For test method Refer IS 6193:1971)
) |
- |
1275 |
|
- |
| 5.6(Heat Shrinkage at 95 degree C(For test method Refer IS 6193:1971)
) |
- |
0 |
|
- |
| 5.7( pigmented tapes(Refer IS 2454)) |
- |
19638 |
|
- |
| 4(MATERIAL(Refer IS 7328 :1974)) |
- |
0.00 |
|
- |
| 5.1(Linear density (For test method Refer IS 6193:1971 and IS 7703 Part 1)) |
- |
0.00 |
|
- |
| 5.2(Tenacity (For test method Refer IS 6193:1971)) |
- |
0.00 |
|
- |
| 5.3(Elongation (For test method Refer IS 6193:1971)) |
- |
0.00 |
|
- |
| 5.4(Finished width (For test method Refer IS 6193:1971)) |
- |
0 |
|
- |
| 5.5(Thickness (For test method Refer IS 6193:1971)) |
- |
0.00 |
|
- |
| 5.6(Heat Shrinkage at 60 degree C(For test method Refer IS 6193:1971)
) |
- |
0.00 |
|
- |
| 5.6(Heat Shrinkage at 95 degree C(For test method Refer IS 6193:1971)
) |
- |
0.00 |
|
- |
| 5.7( pigmented tapes(Refer IS 2454)) |
- |
0.00 |
|
- |
| Cl-4.1(High Density Polyethylene Tapes) |
- |
0 |
|
- |
| Cl-4.2(Polypropylene Tapes) |
- |
0 |
|
- |
| Cl-5.1.8(Ash Content) |
- |
0 |
|
- |
| Cl-6.1(Marking) |
- |
0 |
|
- |
| Cl-5.1.1(Finished tape width) |
- |
0 |
|
- |
| Cl-5.1.2(Thickness of the tape) |
- |
0 |
|
- |
| Cl-5.1.3(Linear density of tape) |
- |
0 |
|
- |
| Cl-5.1.4(Polypropylene Tapes) |
- |
0 |
|
- |
| Cl-5.1.5(Average value of the elongation at break of tape) |
- |
0 |
|
- |
| Cl-5.1.6(UV radiation exposure) |
- |
0 |
|
- |
| Cl-5.1.7(Average heat shrinkage of HDPE tapes) |
- |
0 |
|
- |
| Cl-5.1.6(UV stabilized HDPE and PP resins) |
- |
0 |
|
- |
| Cl-4.1(High Density Polyethylene Tapes) |
- |
0 |
|
- |
| Cl-4.2(Polypropylene Tapes) |
- |
0 |
|
- |
| Cl-5.1.8(Ash Content) |
- |
0 |
|
- |
| Cl-6.1(Marking) |
- |
0 |
|
- |
| Cl-5.1.1(Finished tape width) |
- |
0 |
|
- |
| Cl-5.1.2(Thickness of the tape) |
- |
0 |
|
- |
| Cl-5.1.3(Linear density of tape) |
- |
0 |
|
- |
| Cl-5.1.4(Polypropylene Tapes) |
- |
0 |
|
- |
| Cl-5.1.5(Average value of the elongation at break of tape) |
- |
0 |
|
- |
| Cl-5.1.6(UV radiation exposure) |
- |
0 |
|
- |
| Cl-5.1.7(Average heat shrinkage of HDPE tapes) |
- |
0 |
|
- |
| Cl-5.1.6(UV stabilized HDPE and PP resins) |
- |
0 |
|
- |
| Cl-4.1(High Density Polyethylene Tapes) |
- |
0 |
|
- |
| Cl-4.2(Polypropylene Tapes) |
- |
0 |
|
- |
| Cl-5.1.8(Ash Content) |
- |
0 |
|
- |
| Cl-6.1(Marking) |
- |
0 |
|
- |
| Cl-5.1.1(Finished tape width) |
- |
0 |
|
- |
| Cl-5.1.2(Thickness of the tape) |
- |
0 |
|
- |
| Cl-5.1.3(Linear density of tape) |
- |
0 |
|
- |
| Cl-5.1.4(Polypropylene Tapes) |
- |
0 |
|
- |
| Cl-5.1.5(Average value of the elongation at break of tape) |
- |
0 |
|
- |
| Cl-5.1.6(UV radiation exposure) |
- |
0 |
|
- |
| Cl-5.1.7(Average heat shrinkage of HDPE tapes) |
- |
0 |
|
- |
| Cl-5.1.6(UV stabilized HDPE and PP resins) |
- |
0 |
|
- |
| Cl-4.1(High Density Polyethylene Tapes) |
- |
0 |
|
- |
| Cl-4.2(Polypropylene Tapes) |
- |
0 |
|
- |
| Cl-5.1.8(Ash Content) |
- |
0 |
|
- |
| Cl-6.1(Marking) |
- |
0 |
|
- |
| Cl-5.1.1(Finished tape width) |
- |
0 |
|
- |
| Cl-5.1.2(Thickness of the tape) |
- |
0 |
|
- |
| Cl-5.1.3(Linear density of tape) |
- |
0 |
|
- |
| Cl-5.1.4(Polypropylene Tapes) |
- |
0 |
|
- |
| Cl-5.1.5(Average value of the elongation at break of tape) |
- |
0 |
|
- |
| Cl-5.1.6(UV radiation exposure) |
- |
0 |
|
- |
| Cl-5.1.7(Average heat shrinkage of HDPE tapes) |
- |
0 |
|
- |
| Cl-5.1.6(UV stabilized HDPE and PP resins) |
- |
0 |
|
- |
|
31 Dec, 2026 |
-
Included w.e.f.03.07.2025
Exclusion
Cl 4.3 |
| 12063 |
Central Institute of Petrochemicals Engineering & Technology (CIPET), CSTS - Dehradun
| 9178004
| IS 17546 (2021) |
Chlorinated polyvinyl chloride CPVC fittings for potable hot and cold water distribution supplies Specification |
15mm to 150mm |
164250.00 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 6(Composition) |
- |
1100.00 |
|
Optional (Applicable on Raw Material). |
| 7(Dimensions of fitting) |
- |
500.00 |
|
- |
| 8.1(Visual Appearance) |
- |
500.00 |
|
- |
| 8.2(Opacity) |
- |
700.00 |
|
- |
| 8.3(Stress Relief Test) |
- |
700.00 |
|
- |
| 8.4(Vicat softening Temperature) |
- |
1100.00 |
|
- |
| 8.5(Density) |
- |
700.00 |
|
- |
| 8.6(Effect on water) |
- |
3000.00 |
|
- |
| 3.1(Nominal Size(DN)) |
- |
0.00 |
|
TEST CHARGE FOR THIS PARAMETER ALREADY TAKEN ABOVE. |
| 3.2(Nominal Outside Diameter) |
- |
0.00 |
|
TEST CHARGE FOR THIS PARAMETER ALREADY TAKEN ABOVE. |
| 3.3(Mean Inside Diameter of Socket at Entry) |
- |
0.00 |
|
TEST CHARGE FOR THIS PARAMETER ALREADY TAKEN ABOVE. |
| 3.4(Mean Inside Diameter of Socket at Shoulder (Bottom)) |
- |
0.00 |
|
TEST CHARGE FOR THIS PARAMETER ALREADY TAKEN ABOVE. |
| 3.4(Mean Inside Diameter of Socket at Shoulder (Bottom)) |
- |
0.00 |
|
TEST CHARGE FOR THIS PARAMETER ALREADY TAKEN ABOVE. |
| 3.5(Out-of-Roundness (Ovality)) |
- |
0.00 |
|
TEST CHARGE FOR THIS PARAMETER ALREADY TAKEN ABOVE. |
| 3.6(Nominal Wall Thickness) |
- |
0.00 |
|
TEST CHARGE FOR THIS PARAMETER ALREADY TAKEN ABOVE. |
| 3.7(Minimum Wall Thickness) |
- |
0.00 |
|
TEST CHARGE FOR THIS PARAMETER ALREADY TAKEN ABOVE. |
| 3.8(Tolerance) |
- |
0.00 |
|
- |
| 3.9(Working Pressure) |
- |
0.00 |
|
- |
| 3.1(Standard Dimension Ratio) |
- |
0.00 |
|
- |
| 3.11(Type Tests) |
- |
0.00 |
|
- |
| 3.11(Acceptance Tests) |
- |
0.00 |
|
- |
| 11(Marking) |
- |
0.00 |
|
- |
| 9(Mechanical Properties) |
- |
0.00 |
|
- |
|
24 Apr, 2027 |
-
- |
| 12064 |
BIS, Central Laboratory (CL)
| None
| IS 12234 (2021) |
Plastic equilibrium float valves for cold water services - Specification (first revision) |
- |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 5 (Materials) |
- |
|
|
|
| 6 (Manufacture and Workmanship) |
- |
|
|
|
| 7.1 to 7.3 , 7.6 to 7.9 (Construction) |
- |
|
|
|
| 7.4 to 7.5 and 7.10 (Dimensions, Screw threads and Back nut) |
- |
|
|
|
| 8.1.1, 8.1.2 (Hydraulic and Shut-Off Test) |
- |
|
|
|
| 8.2 Appendix-A (Antisiphonage Test) |
- |
|
|
|
| 8.3 Appendix-B (Flow Test) |
- |
|
|
|
| 8.4 Appendix-C (Endurance Test) |
- |
|
|
|
| 10 (Marking) |
- |
|
|
|
|
- |
-
- |
| 12065 |
BIS, Central Laboratory (CL)
| None
| IS 15450 (2022) |
Polyethylene-aluminium-polyethylene composite pressure pipes for hot and cold water supplies Specifications first revision of IS 15450 |
- |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 7 (NOMINAL DIAMETERS) |
- |
|
|
|
| 9 (DIMENSIONS OF PIPE) |
- |
|
|
|
| 10 (VISUAL APPEARANCE) |
- |
|
|
|
| 11.2 (Melt Flow Rate (Method of test as per Table 3)) |
- |
|
|
|
| 11.1 (Density (Method of test as per Table 3)) |
- |
|
|
|
| 11.8 (Adhesion Test) |
- |
|
|
|
| 11.9 (Apparent Tensile Strength of Pipe) |
- |
|
|
|
| 11.10 (Minimum Burst Pressure) |
- |
|
|
|
| 11.11 (Hydraulic Characteristics) |
- |
|
|
|
| 12.1 (Type Test) |
- |
|
|
|
|
- |
-
- |
| 12066 |
Central Institute of Petrochemicals Engineering & Technology (CIPET), CSTS - Dehradun
| 9178004
| IS 9755 (2021) |
Textiles - High Density Polyethylene (HDPE) / Polypropylene (pp) Woven Sacks for Packing Fertilizers |
Type-1 & Type 2 |
40130.00 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4.1(Raw Meterial) |
- |
4200.00 |
|
Optional (applicable on Raw materials)
1. identification 2000.00
2. Overall Migration 1700+500 |
| 4.2("Fabric
b) Linear Density") |
- |
700.00 |
|
Optional (applicable on Tapes) |
| 4.2("Fabric
a) Width of Tape") |
- |
500.00 |
|
Optional (applicable on Tapes) |
| 4.4.1(Thickness of Linear) |
- |
500.00 |
|
- |
| 4.4.2(Visual Observation) |
- |
500.00 |
|
- |
| 4.4.3(Bottom Seam of Loose Liner) |
- |
500.00 |
|
- |
| 4.5(Laminated Fabric) |
- |
2000.00 |
|
- |
| 4.6.1(Distance between the Two Row of Stitches) |
- |
500.00 |
|
- |
| 4.6.2(Breaking Load of the stitching material Non UV Stabilized sack) |
- |
1100.00 |
|
- |
| 4.7(Mouth of the Sack) |
- |
500.00 |
|
- |
| "Table 1 of Cl. No.5.1 Sl. No. i"("Dimension
a) Inside Length Type 1 & Type 2
") |
- |
500.00 |
|
- |
| "Table 1 of Cl. No.5.1 Sl. No. ii"(Ends/dm ( Type 1 & Type 2)) |
- |
1000.00 |
|
Ends per dm 500
Picks per dm 500 |
| "Table 1 of Cl. No.5.3 Sl. No. iv"("Mass of Fabric
a) Unlaminated Sack( Type 1 & Type 2)") |
- |
500.00 |
|
- |
| "Table 1 of Cl. No.5.3 Sl. No. v"(Mass of Sack( Type 1 & Type 2)) |
- |
500.00 |
|
- |
| "Table 1 of Cl. No.5.4 Sl. No. vi"(Avg. Breaking Strength Of fabric (Ravelled strip method)( 325mm X 25 mm)) |
- |
2700.00 |
|
- |
| "Table 1 of Cl. No.5.4 Sl. No. vii"(Breaking Strength of Bottom Seam (Ravelled strip method)) |
- |
1100.00 |
|
- |
| "Table 1 of Cl. No.5.1 Sl. No. viii"("Elongation at Break of fabric
a)Length(Type 1 & Type 2)") |
- |
0.00 |
|
Breaking strength & elongation have single Charge. |
| "Table 1 of Cl. No.5.5 Sl. No. ix"("Ash Content
a) For UV Stabilized Sack") |
- |
1200.00 |
|
- |
| Cl. No.5.3(Mass of Bale) |
- |
500.00 |
|
- |
| Cl. No.5.7(UV Resistance) |
- |
2700.00 |
|
- |
| "Table 1 of Cl. No.5.6 Sl. No. x"(Drop Impact Strength) |
- |
1100.00 |
|
- |
| 5.6(Drop Impact Test) |
- |
0.00 |
|
- |
| 4.2("Fabric
c) Mesh") |
- |
0.00 |
|
- |
| 4.2("Fabric
c) Mesh") |
- |
0.00 |
|
- |
| 4.2("Fabric
d) Unlaminated Fabric Mass") |
- |
0.00 |
|
- |
| 4.3(Sacks) |
- |
0.00 |
|
- |
| 4.4.1(Loose Liner) |
- |
0.00 |
|
- |
| 4.5(Mass of The Lamination) |
- |
0.00 |
|
- |
| 4.5(Lamination Over Hang of the fabric after trimming) |
- |
0.00 |
|
- |
| 4.6.1(Distance of outer stitch from the edge of the bag) |
- |
0.00 |
|
- |
| 4.6.1(Depth of the Stitch( Double fold)) |
- |
0.00 |
|
- |
| 4.6.1(No.of Stitches/dm) |
- |
0.00 |
|
- |
| 4.6.2(Breaking Load for UV Stabilized sack) |
- |
0.00 |
|
- |
| "Table 1 of Cl. No.5.1 Sl. No. i"("Dimension
b) Inside Width ") |
- |
0.00 |
|
- |
| "Table 1 of Cl. No.5.1 Sl. No. iii"(Picks /dm ( Type 1 & Type 2)) |
- |
0.00 |
|
- |
| "Table 1 of Cl. No.5.3 Sl. No. iv"("Mass of Fabric
b) Laminated Sack( Type 1 & Type 2)") |
- |
0.00 |
|
- |
| "Table 1 of Cl. No.5.1 Sl. No. viii"("Elongation at Break of fabric
b) Width(Type 1 & Type 2)") |
- |
0.00 |
|
- |
| "Table 1 of Cl. No.5.5 Sl. No. ix"("Ash Content
b) For Non- UV Stabilized Sack") |
- |
0.00 |
|
- |
| Cl. No.5.2(Visual Observation) |
- |
0.00 |
|
- |
| Cl. No.5.4(Breaking Strength of Fabric) |
- |
0.00 |
|
- |
| Cl. No.5.5("Ash Content
a) For UV Stabilized Sack") |
- |
0.00 |
|
- |
| Cl. No.5.5("Ash Content
b) For Non- UV Stabilized Sack") |
- |
0.00 |
|
- |
| Cl. No.5.6(Drop Impact testing of filled sack) |
- |
0.00 |
|
- |
| Cl. No.6.1(Printing on Sacks) |
- |
0.00 |
|
- |
| Cl. No.6.2.(Packaging) |
- |
0.00 |
|
- |
| Cl. No.6.3.(Marking on the Bale) |
- |
0.00 |
|
- |
| Cl. No.6.4.(BIS Certification Marking) |
- |
0.00 |
|
- |
| Cl. No.6.5.(Storage) |
- |
0.00 |
|
- |
| Cl. No.5.5("Ash Content
a) For UV Stabilized Sack") |
- |
0.0 |
|
- |
|
24 Apr, 2027 |
-
- |
| 12067 |
CENTRAL INSTITUTE OF PETROCHEMICALS ENGINEERING & TECHNOLOGY (CIPET) : IPT-BHUBANESWAR
| 5102634
| IS 14885 (2022) |
Polyethylene Pipes for the Supply of Gaseous Fuels � Specification (First Revision) |
PE 80 and PE 100(– SDR 17 / SDR 13.6 / SDR 11 / SDR 9) |
402000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4.2(Grade of material) |
- |
0 |
|
nil |
| 4.3(Nominal Diameter) |
- |
0 |
|
nil |
| 4.4(Colour) |
- |
0 |
|
nil |
| 5.1(Polyethylene
compound) |
- |
4575 |
|
nil |
| 5.5(Effect of Gas
condensate on the
Hydrostatic strength) |
- |
4750 |
|
nil |
| 5.7(PE Compound Quality Evaluation) |
- |
300000 |
|
nil |
| 5.6(Resistance to Weathering) |
- |
11875 |
|
nil |
| 6.1(Mean out side Diameter (For less than or equal to 25 mm- Average of 8 , For higher diameters average of 6)) |
- |
375 |
|
nil |
| 6.1(Out of Roundness (Ovality)) |
- |
0.00 |
|
nil |
| 6.2(Wall thickness (Take 8 reading and Average will be repoted)) |
- |
375 |
|
nil |
| 7(Finish) |
- |
375 |
|
nil |
| 8.1(Internal pressure creep
rupture test for plain at 80 deg. C for
165h) |
- |
8250 |
|
nil |
| 8.1(Internal pressure creep
rupture test for plain
pipes at 20 deg. C for
100h) |
- |
3500 |
|
nil |
| 8.1(Internal pressure creep
rupture test for plain
pipes at 80 deg. C for
1000 h) |
- |
4100 |
|
nil |
| 8.2(Reversion Test) |
- |
525 |
|
nil |
| 8.3(Density) |
- |
525 |
|
nil |
| 8.6(Thermal Stability (Oxidation Induction Time)) |
- |
1650 |
|
nil |
| 8.7(Volatile Matter Content) |
- |
525 |
|
nil |
| 8.8(Tensile Properties (Tensile Yield Strength and
Elongation at Break)) |
- |
1475 |
|
nil |
| 8.9(Resistance to Weathering) |
- |
1875 |
|
nil |
| 6.4(Length of Pipe) |
- |
375 |
|
nil |
| 8.4(Melt Flow Rate (MFR)) |
- |
825 |
|
nil |
| 8.5(Pigment Dispersion) |
- |
525 |
|
nil |
| 8.10(Slow Crack Growth Rate Test) |
- |
8225 |
|
nil |
| 8.11(Squeeze-off) |
- |
5075 |
|
nil |
| 4.2(Grade of material) |
- |
0.00 |
|
- |
| 4.3(Nominal Diameter) |
- |
0.00 |
|
- |
| 4.4(Colour) |
- |
0 |
|
- |
| 5.1(Polyethylene
compound) |
- |
0 |
|
- |
| 5.5(Effect of Gas
condensate on the
Hydrostatic strength) |
- |
0 |
|
- |
| 5.7(PE Compound Quality Evaluation) |
- |
0.00 |
|
- |
| 5.6(Resistance to Weathering) |
- |
0 |
|
- |
| 6.1(Mean out side Diameter (For less than or equal to 25 mm- Average of 8 , For higher diameters average of 6)) |
- |
0 |
|
- |
| 6.1(Out of Roundness (Ovality)) |
- |
0.00 |
|
- |
| 6.2(Wall thickness (Take 8 reading and Average will be repoted)) |
- |
0.00 |
|
- |
| 7(Finish) |
- |
0 |
|
- |
| 8.1(Internal pressure creep
rupture test for plain at 80 deg. C for
165h) |
- |
0 |
|
- |
| 8.1(Internal pressure creep
rupture test for plain
pipes at 20 deg. C for
100h) |
- |
0 |
|
- |
| 8.1(Internal pressure creep
rupture test for plain
pipes at 80 deg. C for
1000 h) |
- |
0 |
|
- |
| 8.2(Reversion Test) |
- |
0 |
|
- |
| 8.3(Density) |
- |
0 |
|
- |
| 8.6(Thermal Stability (Oxidation Induction Time)) |
- |
0 |
|
- |
| 8.7(Volatile Matter Content) |
- |
0 |
|
- |
| 8.8(Tensile Properties (Tensile Yield Strength and
Elongation at Break)) |
- |
0 |
|
- |
| 8.9(Resistance to Weathering) |
- |
0.00 |
|
- |
| 6.4(Length of Pipe) |
- |
0.00 |
|
- |
| 8.4(Melt Flow Rate (MFR)) |
- |
0 |
|
- |
| 8.5(Pigment Dispersion) |
- |
0 |
|
- |
| 8.10(Slow Crack Growth Rate Test) |
- |
0 |
|
- |
| 8.11(Squeeze-off) |
- |
0 |
|
- |
| 4.2(Grade of material) |
- |
0 |
|
- |
| 4.3(Nominal Diameter) |
- |
0 |
|
- |
| 4.4(Colour) |
- |
0 |
|
- |
| 5.1(Polyethylene
compound) |
- |
0 |
|
- |
| 5.7(PE Compound Quality Evaluation) |
- |
0 |
|
- |
| 5.5(Effect of Gas
condensate on the
Hydrostatic strength) |
- |
0 |
|
- |
| 5.6(Resistance to Weathering) |
- |
42225 |
|
- |
| 6.1(Mean out side Diameter (For less than or equal to 25 mm- Average of 8 , For higher diameters average of 6)) |
- |
0 |
|
- |
| 6.1(Out of Roundness (Ovality)) |
- |
0 |
|
- |
| 6.2(Wall thickness (Take 8 reading and Average will be repoted)) |
- |
0 |
|
- |
| 7(Finish) |
- |
0 |
|
- |
| 8.1(Internal pressure creep
rupture test for plain at 80 deg. C for
165h) |
- |
0 |
|
- |
| 8.1(Internal pressure creep
rupture test for plain
pipes at 20 deg. C for
100h) |
- |
0 |
|
- |
| 8.1(Internal pressure creep
rupture test for plain
pipes at 80 deg. C for
1000 h) |
- |
0 |
|
- |
| 8.2(Reversion Test) |
- |
0 |
|
- |
| 8.3(Density) |
- |
0 |
|
- |
| 8.6(Thermal Stability (Oxidation Induction Time)) |
- |
0 |
|
- |
| 8.7(Volatile Matter Content) |
- |
0 |
|
- |
| 8.8(Tensile Properties (Tensile Yield Strength and
Elongation at Break)) |
- |
0 |
|
- |
| 8.9(Resistance to Weathering) |
- |
0 |
|
- |
| 6.4(Length of Pipe) |
- |
0 |
|
- |
| 8.4(Melt Flow Rate (MFR)) |
- |
0 |
|
- |
| 8.5(Pigment Dispersion) |
- |
0 |
|
- |
| 8.10(Slow Crack Growth Rate Test) |
- |
0 |
|
- |
| 8.11(Squeeze-off) |
- |
0 |
|
- |
| 5.1, 5.7 Table 2(i) Conventional density (of base polymer)) |
- |
0 |
|
- |
| 5.1, 5.7 Table 2(ii) Melt flow rate (MFR)) |
- |
0 |
|
- |
| 5.1, 5.7 Table 2(iii) Thermal stability (oxidation induction time)) |
- |
0 |
|
- |
| 5.1, 5.7 Table 2(iv) Volatile content) |
- |
0 |
|
- |
| 5.1, 5.7 Table 2(v) Water content1)) |
- |
0 |
|
- |
| 5.1, 5.7 Table 2(vi) Pigment dispersion) |
- |
0 |
|
- |
| 5.1, 5.7 Table 3(iv) Resistance to slow crack growth rate) |
- |
0 |
|
- |
| 5.5(Effects of Gas Condensate on the Hydrostatic Strength) |
- |
0 |
|
- |
| 5.6(ii) Hydraulic characteristics) |
- |
0 |
|
- |
| 5.6(iii) Thermal stability (Oxidation induction time)) |
- |
0 |
|
- |
| 6(Dimensions of pipes) |
- |
0 |
|
- |
| 7(Finish) |
- |
0 |
|
- |
| 8.1(Hydraulic Characteristics) |
- |
0 |
|
- |
| 8.2(Reversion test) |
- |
0 |
|
- |
| 8.3(Density) |
- |
0 |
|
- |
| 8.4(Melt Flow Rate) |
- |
0 |
|
- |
| 8.5(Pigment Dispersion) |
- |
0 |
|
- |
| 8.6(Thermal Stability (Oxidation Induction Time)) |
- |
0 |
|
- |
| 8.7(Volatile Matter Content) |
- |
0 |
|
- |
| 8.9(Resistance to Weathering) |
- |
0 |
|
- |
| 8.8(Tensile Properties (Tensile Yield Strength and Elongation at Break)) |
- |
0 |
|
- |
| 8.10(Slow Crack Growth Rate Test) |
- |
0 |
|
- |
| 8.11(Squeeze-of) |
- |
0 |
|
- |
| 10(Marking) |
- |
0 |
|
- |
| 4.2(Grade of material) |
- |
0 |
|
- |
| 4.3(Nominal Diameter) |
- |
0 |
|
- |
| 4.4(Colour) |
- |
0 |
|
- |
| 5.1(Polyethylene
compound) |
- |
0 |
|
- |
| 5.7(PE Compound Quality Evaluation) |
- |
0 |
|
- |
| 5.5(Effect of Gas
condensate on the
Hydrostatic strength) |
- |
0 |
|
- |
| 5.6(Resistance to Weathering) |
- |
0 |
|
- |
| 6.1(Mean out side Diameter (For less than or equal to 25 mm- Average of 8 , For higher diameters average of 6)) |
- |
0 |
|
- |
| 6.1(Out of Roundness (Ovality)) |
- |
0 |
|
- |
| 6.2(Wall thickness (Take 8 reading and Average will be repoted)) |
- |
0 |
|
- |
| 7(Finish) |
- |
0 |
|
- |
| 8.1(Internal pressure creep
rupture test for plain at 80 deg. C for
165h) |
- |
0 |
|
- |
| 8.1(Internal pressure creep
rupture test for plain
pipes at 20 deg. C for
100h) |
- |
0 |
|
- |
| 8.1(Internal pressure creep
rupture test for plain
pipes at 80 deg. C for
1000 h) |
- |
0 |
|
- |
| 8.2(Reversion Test) |
- |
0 |
|
- |
| 8.3(Density) |
- |
0 |
|
- |
| 8.6(Thermal Stability (Oxidation Induction Time)) |
- |
0 |
|
- |
| 8.7(Volatile Matter Content) |
- |
0 |
|
- |
| 8.8(Tensile Properties (Tensile Yield Strength and
Elongation at Break)) |
- |
0 |
|
- |
| 8.9(Resistance to Weathering) |
- |
0 |
|
- |
| 6.4(Length of Pipe) |
- |
0 |
|
- |
| 8.4(Melt Flow Rate (MFR)) |
- |
0 |
|
- |
| 8.5(Pigment Dispersion) |
- |
0 |
|
- |
| 8.10(Slow Crack Growth Rate Test) |
- |
0 |
|
- |
| 8.11(Squeeze-off) |
- |
0 |
|
- |
| 5.1, 5.7 Table 2(i) Conventional density (of base polymer)) |
- |
0 |
|
- |
| 5.1, 5.7 Table 2(ii) Melt flow rate (MFR)) |
- |
0 |
|
- |
| 5.1, 5.7 Table 2(iii) Thermal stability (oxidation induction time)) |
- |
0 |
|
- |
| 5.1, 5.7 Table 2(iv) Volatile content) |
- |
0 |
|
- |
| 5.1, 5.7 Table 2(v) Water content1)) |
- |
0 |
|
- |
| 5.1, 5.7 Table 2(vi) Pigment dispersion) |
- |
0 |
|
- |
| 5.1, 5.7 Table 3(iv) Resistance to slow crack growth rate) |
- |
0 |
|
- |
| 5.5(Effects of Gas Condensate on the Hydrostatic Strength) |
- |
0 |
|
- |
| 5.6(ii) Hydraulic characteristics) |
- |
0 |
|
- |
| 5.6(iii) Thermal stability (Oxidation induction time)) |
- |
0 |
|
- |
| 6(Dimensions of pipes) |
- |
0 |
|
- |
| 7(Finish) |
- |
0 |
|
- |
| 8.1(Hydraulic Characteristics) |
- |
0 |
|
- |
| 8.2(Reversion test) |
- |
0 |
|
- |
| 8.3(Density) |
- |
0 |
|
- |
| 8.4(Melt Flow Rate) |
- |
0 |
|
- |
| 8.5(Pigment Dispersion) |
- |
0 |
|
- |
| 8.6(Thermal Stability (Oxidation Induction Time)) |
- |
0 |
|
- |
| 8.7(Volatile Matter Content) |
- |
0 |
|
- |
| 8.9(Resistance to Weathering) |
- |
0 |
|
- |
| 8.8(Tensile Properties (Tensile Yield Strength and Elongation at Break)) |
- |
0 |
|
- |
| 8.10(Slow Crack Growth Rate Test) |
- |
0 |
|
- |
| 8.11(Squeeze-of) |
- |
0 |
|
- |
| 10(Marking) |
- |
0 |
|
- |
|
31 Dec, 2026 |
-
Included w.e.f.03.07.2025
Exclusion
Cl 5.3, Cl 5.4 |
| 12068 |
BIS, Western Regional Laboratory (WRL)
| None
| IS 3950 (1979) |
surface boxes for sluice valves |
- |
Rs.450/- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 3 (MANUFACTURE AND WORKMANSHIP) |
- |
|
|
|
| 4 (CONSTRUCTION) |
- |
|
|
|
| 5 (DIMENSIONS AND TOLERANCES) |
- |
|
|
|
| 6 (MASS) |
- |
|
|
|
| 8 (PROTECTIVE COATING) |
- |
|
|
|
|
- |
-
- |
| 12069 |
BIS, Western Regional Laboratory (WRL)
| None
| IS 16111 (2013) |
Elastic bandage |
- |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 7.1,7.1.1 (Weight
The weight of the elastic bandage shall be 25 to170 g/m2
.) |
- |
|
|
|
| 7.2
Annex A (Stretch Length and Extensibility :
The extensibility of elastic bandage shall be 65 to 220 percent when tested as described in Annex A) |
- |
|
|
|
| 7.3
Annex B (Regain :
The regain of the test bandage shall be not less than 70 percent when tested as described in Annex B) |
- |
|
|
|
| 5 (DIMENSIONS AND TOLERANCES) |
- |
|
|
|
| 5 a)
Cl.9.2 (Width) |
- |
|
|
|
| 5 b) (Stretched Length) |
- |
|
|
|
| 8.2 (Finish) |
- |
|
|
|
|
- |
-
- |
| 12070 |
BIS, Western Regional Laboratory (WRL)
| None
| IS 13593 (1992) |
Upvc Pipe Fittings to be Used with the Upvc Pipes in the Suction and Delivery Lines Of Agricultural Pumps |
- |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 7.1 (Mean outside diameter) |
- |
|
|
|
| 7.2 (Thickness) |
- |
|
|
|
| 7.3 (Depth of socket) |
- |
|
|
|
| 7.4 (Other dimensions) |
- |
|
|
|
| 8 (Workmanship) |
- |
|
|
|
| 9.1 (Vacuum test) |
- |
|
|
|
| 9.2 (Hydrostatic test) |
- |
|
|
|
|
- |
-
- |
| 12071 |
PIONEER TESTING LABORATORY PRIVATE LIMITED
| 8176806
| IS 277 (2018) |
Galvanized steel strips and sheets (Plain And Corrugated) - Specification (Seventh Revision) |
All Type |
4600 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl 8.1(UTM) |
- |
1500 |
|
- |
| Cl 8.2(Press) |
- |
500 |
|
- |
| Cl 10(Galvanising Test) |
- |
500 |
|
- |
| Cl 12(Workmanship) |
- |
200 |
|
- |
| Cl 13(Weight) |
- |
300 |
|
- |
| Cl 14(Length, Width & Thickness) |
- |
600 |
|
- |
| 7.4(Mass of Coating: Single Spot Test) |
- |
1000 |
|
- |
| 7.4(Mass of Coating: Triple Spot Test) |
- |
1000 |
|
- |
| 7.1 & 10.2(Mass of Coating: Single Spot Test) |
- |
1000 |
|
- |
| 7.1 & 10.2(Mass of Coating: Triple Spot Test) |
- |
1000 |
|
- |
| 5.1(phosphorus) |
- |
300 |
|
- |
| 5.1(copper) |
- |
300 |
|
- |
| 5.1(nitrogen) |
- |
300 |
|
- |
| 5.1(micro alloy) |
- |
300 |
|
- |
| 5.1(aluminium) |
- |
300 |
|
- |
| 5.1(silicon ) |
- |
300 |
|
- |
| 5.1(manganese) |
- |
300 |
|
- |
| 5.1(sulphur) |
- |
300 |
|
- |
| 5.1(carbon) |
- |
300 |
|
- |
| Cl. 14 & Cl. 15(Pitch of corrugation (average of 4)) |
- |
200 |
|
- |
| Cl. 14 & Cl. 15(Depth of corrugation (average of 4)) |
- |
200 |
|
- |
| Cl. 14 & Cl. 15 (Cl. 14 & Cl 15 (Number of Corrugation)) |
- |
200 |
|
- |
| Cl. 14 & Cl. 15 (Cl. 14 & Cl 15 (Difference between Diagonal)) |
- |
200 |
|
- |
| Cl. 14 & Cl. 15 (Cl. 14 & Cl. 15 (Thickness)) |
- |
200 |
|
- |
| Cl. 14 (Cl. 14 & Cl 15 (Width)) |
- |
200 |
|
- |
| Cl. 14 (Cl. 14 & Cl 15 (Length)) |
- |
200 |
|
- |
| Cl.12(Freedom from defects) |
- |
200 |
|
- |
| Cl. 8.1 (Cl. 8.1 (Percentage Elongation )) |
- |
1000 |
|
- |
| Cl. 8.1 (Cl. 8.1 (Yield Stress)) |
- |
1000 |
|
- |
| Cl. 8.1 (Cl. 8.1 (Tensile Strength)) |
- |
1000 |
|
- |
| cl 5.1, T-1, Note-5, For Microalloying elements(Nb+V+Ti+B) |
- |
300 |
|
- |
| cl 5.1, T-1, Note-5, For Microalloying elements(B) |
- |
300 |
|
- |
| cl 5.1, T-1, Note-5, For Microalloying elements(Ti) |
- |
300 |
|
- |
| cl 5.1, T-1, Note-5, For Microalloying elements(V) |
- |
300 |
|
- |
| cl 5.1, T-1, Note-5, For Microalloying elements(Nb) |
- |
300 |
|
- |
| cl 5.1, T-1, Note-4, For Cu bearing quality(Cu) |
- |
300 |
|
- |
| cl 5.1, T-1, Note-2, When Al-Si killed(Si) |
- |
300 |
|
- |
| cl 5.1, T-1, Note-2, When Si killed(Si) |
- |
300 |
|
- |
| cl 5.1, T-1, Note-2, When Al killed(Al) |
- |
300 |
|
- |
| Cl. 9(Surface roughness) |
- |
200 |
|
- |
| 7.6(Coating finish type) |
- |
200 |
|
- |
| 8.3(Bend test miniral diameter) |
- |
500 |
|
- |
|
10 Mar, 2030 |
-
- |
| 12072 |
PIONEER TESTING LABORATORY PRIVATE LIMITED
| 8176806
| IS 12818 (2010) |
Unplasticized polyvinyl chloride (Pvc - U) screen and casing pipes for bore/tubewells - Specification (Second Revision) |
All Type |
17750 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 9.6(Vicat Softening Temperature
IS 12235 (Part 2).) |
- |
1500 |
|
- |
| 9.5(Tensile Strength
IS 12235(Part 13)) |
- |
1500 |
|
- |
| 9.4 and Table 14(Resistance to External Blows at 0 ?C
IS 12235 (Part 9)) |
- |
1500 |
|
- |
| 9.3(Density
IS 12235 (Part 14)) |
- |
750 |
|
- |
| 9.1( Visual Appearance) |
- |
500 |
|
- |
| 9.2(Internal Diameter) |
- |
300 |
|
- |
| 8.4.1 and Table 13
Fig 3B & 4B(Dimensions of sealing elements) |
- |
300 |
|
- |
| 8.4.1 and Table 13
Fig 3B & 4B(Dimensions of sealing elements) |
- |
300 |
|
- |
| 8.4.1 and Table 13
Fig 3B & 4B(Dimensions of sealing elements) |
- |
300 |
|
- |
| 8.4.1 and Table 13
Fig 3B & 4B(Dimensions of sealing elements) |
- |
300 |
|
- |
| 8.4.1 and Table 13
Fig 3B & 4B(Dimensions of sealing elements) |
- |
300 |
|
- |
| 8.4.1 and Table 13
Fig 3B & 4B(Dimensions of sealing elements) |
- |
300 |
|
- |
| 8.4.1 and Table 13
Fig 3B & 4B(Dimensions of sealing elements) |
- |
300 |
|
- |
| 8.4(Sealing rings - Hardness) |
- |
1000 |
|
- |
| 8.1 to 8.3 and Table 11 &12
Fig 3A & 4A(THREADING OF SCREEN ANDCASING PIPES.
IS 554.) |
- |
300 |
|
- |
| 8.1 to 8.3 and Table 11 &12
Fig 3A & 4A(THREADING OF SCREEN ANDCASING PIPES.
IS 554.) |
- |
300 |
|
- |
| 7.5 and Table 10
Fig 2A & 2B(Approximate Free Passage Area, in Percent (Mean Value) for Width of Slot (w)) |
- |
300 |
|
- |
| 7.5 and Table 10
Fig 2A & 2B(Minimum number of slots on the circumference of the cross-section.) |
- |
300 |
|
- |
| 7.5 and Table 10
Fig 2A & 2B(Summation of slot lengths over internal circumference of the cross- section.) |
- |
300 |
|
- |
| 7.4 Table 8 & 9 Fig 1(Segmental length for Spigot (average of 4.0)) |
- |
300 |
|
- |
| 7.4 Table 8 & 9 Fig 1(Segmental length,mm for socket (average of 4.0)) |
- |
300 |
|
- |
| 7.4 Table 8 & 9
Fig 1(Segmental length, l3) |
- |
300 |
|
- |
| 7.4 Table 8 & 9
Fig 1(Effective length, l2) |
- |
300 |
|
- |
| 7.3.2(Rib height) |
- |
300 |
|
- |
| 7.3.1(No.of Ribs) |
- |
300 |
|
- |
| 7.2 and Table 5, 6 & 7
Fig 1B(Wall thickness, Max) |
- |
300 |
|
- |
| 7.2 and Table 5, 6 & 7
Fig 1B(Wall thickness, Min) |
- |
300 |
|
- |
| 7.1, 7.2 and Table 5, 6 & 7 Fig 1B(Mean outside dia over connection,mm (Take 4 reading and maximum valu reported)) |
- |
300 |
|
- |
| 7.1, 7.2 and Table 5, 6 & 7 Fig 1B(Outer Diameter at any point, Max) |
- |
300 |
|
- |
| 7.1, 7.2 and Table 5, 6 & 7 Fig 1B(Outer Diameter at any point , Min) |
- |
300 |
|
- |
| 7.2 and Table 5, 6 & 7
Fig 1B(Mean Outer Diameter of Pipe , Max) |
- |
300 |
|
- |
| 7.2 and Table 5, 6 & 7
Fig 1B(Mean Outer Diameter of Pipe, Min) |
- |
300 |
|
- |
| 7.2 and Table 5, 6 & 7
Fig 1B(Nominal Diameter) |
- |
300 |
|
- |
| 7.2 and Table 5, 6 & 7
Fig 1B(DIMENSIONS - Casing Pipes) |
- |
300 |
|
- |
| 7.1 and Table 1, 2, 3, & 4
Fig 1A & 1B(Wall thickness) |
- |
300 |
|
- |
| 7.1 and Table 1, 2, 3, & 4
Fig 1A & 1B(Mean Outer Diameter over Connection) |
- |
300 |
|
- |
| 7.1 and Table 1, 2, 3, & 4
Fig 1A & 1B(Outer Diameter at any point ) |
- |
300 |
|
- |
| 7.1 and Table 1, 2, 3, & 4
Fig 1A & 1B(Mean Outer Diameter of Pipe) |
- |
300 |
|
- |
| 7.1 and Table 1, 2, 3, & 4
Fig 1A & 1B(Nominal Diameter) |
- |
300 |
|
- |
| 4.1.2 (Ref. Cl 11 of IS 4669)(Composition -Sulphated ash content ) |
- |
1200 |
|
- |
| 4.1.2 (Ref. Cl 5.1. of IS 4669)(Composition - Loss on heating ) |
- |
500 |
|
- |
| 4.1.1 (Ref. 3.4.1. of IS 10151)(Composition - The monomer content (VCM content) in the
resin - Annex A ofIS 10151) |
- |
1500 |
|
- |
| 5(COLOUR) |
- |
200 |
|
- |
| 8.4(Sealing elements
a. Elastomeric material
b. Shore A hardness of sealing Elements
) |
- |
2000 |
|
- |
| 8.4(Width b) |
- |
300 |
|
- |
| 8.3.1
&
8.3.2
(Threading of casing pipe (from 100 to 200 DN Table – 11 & Fig. 3A) & (from 250 to 400 DN Table – 12 & Fig. 4A)
Outside diameter
d1(+0, -0.3)
d2
d3
D1 (+0.3, -0)
D2
D4
D5 (+0.3, -0)
Z
h3 (+0, -0.1)
H4 (+0, -0.1)
) |
- |
300 |
|
- |
| 8.2(Threading of casing pipe As per IS 554 (from 40 to 80mm DN)
Number of threads in 25.4mm
Pitch (P)
Height of thread (h)
Major (Gauge Diameter) d
Pitch(d2)
Minor (d1)
External Thread gauge length
Nominal
No. of turns of thread
max
min
) |
- |
300 |
|
- |
| 7.5.1
7.5.2
(Slot Dimension (Table 10) Fig 2A & 2B
a. Minimum number of slot on the circumference
b. Σa±5%
c. Mean value of approximate free passage area (%) for width of slot (w)
d. Tolerance on width of slot (w)
e. Width of material between slot (b)) |
- |
300 |
|
- |
| 5.0(Colour of Pipes) |
- |
200 |
|
- |
| 9.7(Effect on Water
a) Lead (first extraction)
b) Lead (Third extraction)
c) Dialkyl Tin C4 & higher homologues measured as Tin (Third extraction)
d) Cadmium (All three extracts)
e) Mercury (All three extracts)
f) Other Toxic Substances
) |
- |
7500 |
|
- |
| 4.1.2(K-Value as per IS-4669) |
- |
5000 |
|
- |
| 4.1.1
(VCM Content as per IS 10151 (Annex A)) |
- |
2000 |
|
- |
| 7.1(Screen Pipes) |
- |
300 |
|
- |
| 11(Marking) |
- |
200 |
|
- |
| 5.1(Materials) |
- |
10000 |
|
- |
|
10 Mar, 2030 |
-
- |
| 12073 |
PIONEER TESTING LABORATORY PRIVATE LIMITED
| 8176806
| IS 14887 (2014) |
Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sacks for packaging of 50 kg food grains – Specification (first revision) |
All Type |
15700 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 3.2(Tapes – Width and Thickness
( IS 6192/IS 11197)) |
- |
100 |
|
- |
| 3.2(Tapes – Linear Density
(IS 6192/IS 11197)) |
- |
100 |
|
- |
| 3.2(Tapes – Tenacity (IS 6192/IS 11197)) |
- |
100 |
|
- |
| 3.2(Tapes – Elongation at point of rupture
(IS 6192/IS 11197)) |
- |
1000 |
|
- |
| 3.2(Tapes – Heat Shrinkage (HDPE) (Cl. 3.2 and IS 6192)) |
- |
800 |
|
- |
| 3.2(Tapes – Colour Fastness for pigmented tapes (IS 6192/IS 11197)) |
- |
500 |
|
- |
| 3.2(Tapes – Dimensional stability (PP)
(IS 11197)) |
- |
500 |
|
- |
| 3.3.1(Bottom seam (IS 10789)) |
- |
200 |
|
- |
| 4.1 and 3.4(Mass of bale (Cl. 4.1), Capacity (Cl 3.4)) |
- |
200 |
|
- |
| 4.2 and Table 1 ii(Dimensions ) |
- |
200 |
|
- |
| 5.2 and Table 1 iii(Ends per dm ) |
- |
100 |
|
- |
| 5.2 and Table 1 iv(Picks per dm ) |
- |
100 |
|
- |
| 4.2 and Table 1 v(Mass of sack ) |
- |
500 |
|
- |
| 4.2 and Table 1 vi(Average breaking strength of fabric ) |
- |
1000 |
|
- |
| 4.2 and Table 1 vi(Breaking strength of bottom seam ) |
- |
1000 |
|
- |
| 4.2 and Table 1 viii(Elongation at break of fabric ) |
- |
1000 |
|
- |
| 4.2 and Table 1 ix(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering ) |
- |
8500 |
|
- |
| 4.2 and Table 1 x(Ash content ) |
- |
800 |
|
- |
| 3.1(Material Identification) |
- |
3500 |
|
- |
| 3.1(Overall Migration) |
- |
2500 |
|
- |
| 3.2(Density) |
- |
750 |
|
- |
| 3.2(MFI) |
- |
1200 |
|
- |
|
10 Mar, 2030 |
-
- |
| 12074 |
PIONEER TESTING LABORATORY PRIVATE LIMITED
| 8176806
| IS 14252 (2015) |
Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sack for filling sand – Specification (second revision) |
All Type |
15400 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 3.1(Raw Material) |
- |
2500 |
|
- |
| 3.2(Tapes – Width
) |
- |
100 |
|
- |
| 3.2(Tapes – Linear Density
) |
- |
750 |
|
- |
| 3.3(Tying Cord) |
- |
250 |
|
- |
| 3.4(Sack) |
- |
400 |
|
- |
| 3.4.1(Seam) |
- |
250 |
|
- |
| 4.1 and Table 1 i a(Dimensions Outside Length) |
- |
200 |
|
- |
| 4.1 and Table 1 i b(Dimensions Outside Width) |
- |
200 |
|
- |
| 4.1 and Table 1 ii(Ends per dm ) |
- |
200 |
|
- |
| 4.1 and Table 1 iii(Picks per dm ) |
- |
200 |
|
- |
| 4.2 and Table 1 iv(Mass of sack
) |
- |
500 |
|
- |
| 4.1 and Table 1 v a(Average breaking strength of fabric Warpway
) |
- |
1000 |
|
- |
| 4.1 and Table 1 v b(Average breaking strength of fabric Weftway
) |
- |
1000 |
|
- |
| 4.1 and Table 1 vi(Average Breaking strength of bottom seam ) |
- |
1000 |
|
- |
| 4.1 and Table 1 vii a(Elongation at break of fabric Lengthwise) |
- |
1000 |
|
- |
| 4.1 and Table 1 vii b(Elongation at break of fabric Widthwise ) |
- |
1000 |
|
- |
| 4.1 and Table 1 viii(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering ) |
- |
8500 |
|
- |
| 4.1 and Table 1 ix(Ash content ) |
- |
800 |
|
- |
|
10 Mar, 2030 |
-
- |
| 12075 |
PIONEER TESTING LABORATORY PRIVATE LIMITED
| 8176806
| IS 16208 (2015) |
Textiles - High density polyethylene (HDPE)/polypropylene (PP) woven sacks for packaging 10 kg, 15 kg, 20 kg, 25 kg and 30 kg foodgrains - Specification |
All TYpe |
14800 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 3(TYPES) |
- |
200 |
|
- |
| 4.1(Raw Material) |
- |
2500 |
|
- |
| 4.2(Tapes – Width
IS 6192 and IS 11197) |
- |
200 |
|
- |
| 4.2(Tapes – Linear Density
) |
- |
700 |
|
- |
| 4.2(Construction) |
- |
200 |
|
- |
| 4.3(Sacks) |
- |
200 |
|
- |
| 4.3.1(Bottom Seam) |
- |
500 |
|
- |
| 4.3.1( The two rows of stitches shall be separated from each other) |
- |
200 |
|
- |
| 4.3.1( The outer stitch) |
- |
200 |
|
- |
| 4.3.1( The stitching shall be done with double fold over seam to a depth ) |
- |
500 |
|
- |
| 4.3.1(Stitches pass through a minimum of six layers of the fabric. ) |
- |
500 |
|
- |
| 4.3.1(The number of stitches/dm) |
- |
200 |
|
- |
| 4.3.2(Mouth) |
- |
0 |
|
- |
| 4.4 and Table 1 i(Capacity) |
- |
200 |
|
- |
| 5.2 and Table 1 ii a(Dimensions Inside Length) |
- |
200 |
|
- |
| 5.2 and Table 1 ii b(Dimensions Inside Width) |
- |
200 |
|
- |
| 5.2 and Table 1 iii(Ends per dm ) |
- |
200 |
|
- |
| 5.2 and Table 1 iv(Picks per dm ) |
- |
200 |
|
- |
| 5.1 and Table 1 v(Mass of sack ) |
- |
500 |
|
- |
| 5.2 and Table 1 vi a(Average breaking strength of fabric Lengthwise ) |
- |
1000 |
|
- |
| 5.2 and Table 1 vi b(Average breaking strength of fabric Widthwise ) |
- |
1000 |
|
- |
| 5.2 and Table 1 vi(Breaking strength of bottom seam ) |
- |
1000 |
|
- |
| 5.2 and Table 1 viii a(Elongation at break of fabric Lengthwise) |
- |
1000 |
|
- |
| 5.2 and Table 1 viii b(Elongation at break of fabric Widthwise ) |
- |
1000 |
|
- |
| 5.2 and Table 1 ix(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering ) |
- |
8500 |
|
- |
| 5.2 and Table 1 x(Ash content ) |
- |
800 |
|
- |
|
10 Mar, 2030 |
-
- |
| 12076 |
PIONEER TESTING LABORATORY PRIVATE LIMITED
| 8176806
| IS 2508 (2016) |
Polyethylene films and sheets - Specification (Third Revision) |
All Type |
15650 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 5.1.1(Appearance) |
- |
200 |
|
- |
| 5.1.2(Film Form) |
- |
200 |
|
- |
| 5.1.3(Odour) |
- |
500 |
|
- |
| 5.1.4(Density, Cl.5 of IS 13360(Part-3/Section-1)) |
- |
750 |
|
- |
| 5.1.5(Melt Flow Index. Cl 6, 7 of IS 13360(Part-4/Section-1)) |
- |
1500 |
|
- |
| 5.1.6a(Carbon Black Content, Annex-A) |
- |
1000 |
|
- |
| 5.1.6b(Ash Content, Annex-A) |
- |
750 |
|
- |
| 5.1.6c(Carbon Black Dispersion, Cl.16 of IS 2530) |
- |
1000 |
|
- |
| 5.2.2(Tolerance on Thickness, Annex-A) |
- |
250 |
|
- |
| 6.1, Table 1(Tensile strength at break. A) Machine Direction. IS 13360 (Part 5/Sec 1)) |
- |
1000 |
|
- |
| 6.1, Table 1(Tensile strength at break. B) Transverse Direction. IS 13360 (Part 5/Sec 3)) |
- |
1000 |
|
- |
| 6.1, Table 1(Ageing test at (70-1)c for 7 days , cl 4 IS 7016 ) |
- |
2500 |
|
- |
| 6.1, Table 1(Elongation at break ,A) Machine direction .IS 13360(Part-5/sec-1) ) |
- |
1000 |
|
- |
| 6.1, Table 1(Elongation at break ,B) Cross-machine direction..IS 13360(Part-5/sec-3) ) |
- |
1000 |
|
- |
| 6.1, Table 1(Dartimpact strength Method B of IS 13360 (Part-5/sec-6) ) |
- |
800 |
|
- |
| 6.1, Table 1(Tear resistence. A) Machine direction Annex B) |
- |
2000 |
|
- |
| 6.1, Table 1(Tear resistence. B) Transverse direction ) |
- |
2000 |
|
- |
| 7.1. Table 2(Tensile strength at break A) Machine direction IS 13360 (Part-5/sec-1) ) |
- |
1000 |
|
- |
| 7.1. Table 2(Tensile strength at break,B) Crosse machine direction IS 13360 (Part-5/sec-3) ) |
- |
1000 |
|
- |
| 7.1. Table 2(Ageing test at (70-1)c for 7 days , cl 4 IS 7016 ) |
- |
2500 |
|
- |
| 7.1. Table 2(Elongation at break , A) Machine direction IS 13360 (Part-5/sec-3) IS 13360 (Part-5/sec-1) ) |
- |
1000 |
|
- |
| 7.1. Table 2(Elongation at break , A) Transverse direction IS 13360 (Part-5/sec-3) ) |
- |
1000 |
|
- |
| 7.1. Table 2(Dart impact strenght , Method A of IS 3360 (Part-5/sec-6) ) |
- |
800 |
|
- |
| 8.1, Table 3(Tensile properties ,A) Yield strenght . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do) |
- |
1000 |
|
- |
| 8.1, Table 3(Tensile properties , B) Break strenght . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do) |
- |
1000 |
|
- |
| 8.1, Table 3(Tensile properties ,C) Yield elongation . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do) |
- |
1000 |
|
- |
| 8.1, Table 3(Tensile properties ,D) Break elongation . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do) |
- |
1000 |
|
- |
| 8.1, Table 3(Tear resistance , Annex B) |
- |
2000 |
|
- |
| 8.1, Table 3(Puncture resistance , Annex C) |
- |
1500 |
|
- |
| 9.1, Table 4(Tensile properties ,A) Yield strenght . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do) |
- |
1000 |
|
- |
| 9.1, Table 4(Tensile properties , B) Break strenght . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do) |
- |
1000 |
|
- |
| 9.1, Table 4(Tensile properties ,C) Yield elongation . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do) |
- |
1000 |
|
- |
| 9.1, Table 4(Tensile properties ,D) Break elongation . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do) |
- |
1000 |
|
- |
| 9.1, Table 4(Tear resistance , Annex B) |
- |
2000 |
|
- |
| 9.1, Table 4(Puncture resistance , Annex C) |
- |
1500 |
|
- |
| Clause 7.1(Table 2)(Decrease in Tensile Strength after Ageing(Transverse Direction)) |
- |
2500 |
|
- |
| Clause 7.1(Table 2)(Decrease in Tensile Strength after Ageing(Machine Direction)) |
- |
2500 |
|
- |
| Clause 6.1(Table 1)(Decrease in Tensile Strength after Ageing(Transverse Direction)) |
- |
2500 |
|
- |
| Clause 6.1(Table 1)(Decrease in Tensile Strength after Ageing(Machine Direction)) |
- |
2500 |
|
- |
| Clause 5.2.3(Tolerance on Width) |
- |
250 |
|
- |
| Cl.5.1.6(a)(Carbon Black Content) |
- |
1000 |
|
- |
| Cl.5.1.6(b)(Ash content) |
- |
750 |
|
- |
| Cl.5.1.6(c)(Dispersion of Carbon Black) |
- |
1000 |
|
- |
| 5.2.1.1(Nominal Thickness) |
- |
250 |
|
- |
| 5.2.1.2(Nominal width) |
- |
250 |
|
- |
|
10 Mar, 2030 |
-
- |
| 12077 |
PIONEER TESTING LABORATORY PRIVATE LIMITED
| 8176806
| IS 12701 (1996) |
Rotational moulded polyethylene water storage tanks - specification (First Revision) |
All Type |
18500 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4.2.3(Carbon Black Content ) |
- |
1000 |
|
- |
| 4.2.3(Carbon Dispersion Test) |
- |
1000 |
|
- |
| 5(Types and Features ) |
- |
500 |
|
- |
| 5.1 Table 1(Dimensioas of Cylinderical Vertical Tank) |
- |
700 |
|
- |
| 5.1 Table 1(Dimensioas of Cylinderical Vertical Tank) |
- |
700 |
|
- |
| 5.1 Table 1(Dimensioas of Cylinderical Vertical Tank) |
- |
700 |
|
- |
| 5.1 Table 1(Dimensioas of Cylinderical Vertical Tank) |
- |
700 |
|
- |
| 5.1 Table 1(Dimensioas of Cylinderical Vertical Tank) |
- |
700 |
|
- |
| 5.1 Table 1(Dimensioas of Cylinderical Vertical Tank) |
- |
700 |
|
- |
| 5.1 Table 1(Dimensioas of Cylinderical Vertical Tank) |
- |
700 |
|
- |
| 5.1 Table 1(Dimensioas of Cylinderical Vertical Tank) |
- |
700 |
|
- |
| 5.2 Table 2(Dimensions of Rectangular Loft Tanks) |
- |
700 |
|
- |
| 5.2 Table 2(Dimensions of Rectangular Loft Tanks) |
- |
700 |
|
- |
| 5.2 Table 2(Dimensions of Rectangular Loft Tanks) |
- |
700 |
|
- |
| 5.2 Table 2(Dimensions of Rectangular Loft Tanks) |
- |
700 |
|
- |
| 5.2 Table 2(Dimensions of Rectangular Loft Tanks) |
- |
700 |
|
- |
| 5.2 Table 2(Dimensions of Rectangular Loft Tanks) |
- |
700 |
|
- |
| 5.2 Table 2(Dimensions of Rectangular Loft Tanks) |
- |
700 |
|
- |
| 5.2 Table 2(Dimensions of Rectangular Loft Tanks) |
- |
700 |
|
- |
| 5.3(Types and Features ) |
- |
500 |
|
- |
| 5.6(Types and Features ) |
- |
500 |
|
- |
| 6.1(Finish) |
- |
300 |
|
- |
| 7.1.1(Resistance to Deformation) |
- |
2000 |
|
- |
| 7.1.2(Resistance to Deformation) |
- |
2000 |
|
- |
| 7.2(Resistance to Impact) |
- |
2000 |
|
- |
| 7.3(Test for Top Load Resistance) |
- |
2000 |
|
- |
| 7.4(Tensile Strength) |
- |
1500 |
|
- |
| 7.5(Flexural Modulus) |
- |
1500 |
|
- |
| 7.6(overall Migration) |
- |
2500 |
|
- |
| 9.2(Man-Hole and Hand-Hole Lids) |
- |
700 |
|
- |
| 9.1(Man-Hole and Hand-Hole Lids) |
- |
700 |
|
- |
| 9.1(Lid Thickness) |
- |
700 |
|
- |
| 7.3(Test for Top Load Resistance) |
- |
2000 |
|
- |
| 5.4(Wall Thickness above effective height) |
- |
700 |
|
- |
| 5.2 Table 2 (7)(Minimum Wall Thickness) |
- |
700 |
|
- |
| 5.1 Table 1 (7)(Minimum Weight of Tank (Without Lid)) |
- |
700 |
|
- |
| 4.2.1(Density) |
- |
1000 |
|
- |
| 4.2.2(MFI) |
- |
1500 |
|
- |
| 7.6(overall Migration) |
- |
2500 |
|
- |
| 4.1(MATERIALS) |
- |
10000 |
|
- |
| 10(MARKING) |
- |
200 |
|
- |
|
10 Mar, 2030 |
-
- |
| 12078 |
PIONEER TESTING LABORATORY PRIVATE LIMITED
| 8176806
| IS 6240 (2008) |
Hot rolled steel plate (Up To 6 Mm) sheet and strip for the manufacture of low pressure liquefiable gas cylinders (Fourth Revision) |
All Type |
14200 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl 7(UTM) |
- |
1500 |
|
- |
| Cl 8(Press) |
- |
1000 |
|
- |
| Cl 9(Strainage Embrittlement) |
- |
3500 |
|
- |
| Cl 10(Erichsen Cupping) |
- |
1500 |
|
- |
| Cl 13(Length, Width & Thickness) |
- |
600 |
|
- |
| 6.1(Carbon %) |
- |
300 |
|
- |
| 6.1(Manganese %) |
- |
300 |
|
- |
| 6.1(Phosphorus %) |
- |
300 |
|
- |
| 6.1(Sulphur %) |
- |
300 |
|
- |
| 6.1(Silicon %) |
- |
300 |
|
- |
| 6.1(Nitrogen%) |
- |
300 |
|
- |
| 6.1( Aluminium %) |
- |
300 |
|
- |
| Cl. 13(Out of square) |
- |
200 |
|
- |
| Cl. 13(Flatness) |
- |
500 |
|
- |
| Cl. 13(Camber) |
- |
500 |
|
- |
| Cl. 13(Width) |
- |
200 |
|
- |
| Cl. 13(Thickness) |
- |
200 |
|
- |
| Cl. 12(Freedom from defects) |
- |
200 |
|
- |
| Cl. 7.2 Table 3(Elongation) |
- |
1000 |
|
- |
| Cl. 7.2 Table 3(Yield Stress) |
- |
1000 |
|
- |
| 13(Length - SOP MT-23) |
- |
200 |
|
- |
| 13(Mass) |
- |
500 |
|
- |
| 15(Marking) |
- |
200 |
|
- |
|
10 Mar, 2030 |
-
- |
| 12079 |
PIONEER TESTING LABORATORY PRIVATE LIMITED
| 8176806
| IS 15647 (2006) |
Hot rolled steel narrow width strip for welded tubes and pipes |
All Type |
10600 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl 8(UTM) |
- |
1500 |
|
- |
| Cl 9(Press) |
- |
1000 |
|
- |
| Cl 11(Workmanship) |
- |
500 |
|
- |
| Cl 12(Length, Width & Thickness) |
- |
600 |
|
- |
| Cl 13(Workmanship) |
- |
500 |
|
- |
| Cl. 12(Weight) |
- |
500 |
|
- |
| Cl. 12(Edge Camber) |
- |
750 |
|
- |
| Cl. 12(Thickness) |
- |
200 |
|
- |
| Cl. 8.2 Table 3(Elongation) |
- |
1000 |
|
- |
| Cl. 8.2 Table 3(Yield Stress) |
- |
1000 |
|
- |
| 8(Tensile Strength-IS:1608(P1)) |
- |
1500 |
|
- |
| 8(Yield Strength-IS:1608(P1)) |
- |
1000 |
|
- |
| 8(Elongation -IS:1608(P1)) |
- |
1000 |
|
- |
| 8.0(Bend test IS 1599:1985) |
- |
1000 |
|
- |
| 9.0(Bend Test IS 1599:1985) |
- |
1000 |
|
- |
| 7(Carbon as C - IS:228) |
- |
300 |
|
- |
| 7(Manganese as Mn-IS:228) |
- |
300 |
|
- |
| 7(Sulphur as S- IS:228) |
- |
300 |
|
- |
| 7(Phosphorus as P-IS:228) |
- |
300 |
|
- |
| 7(Aluminium -IS:228) |
- |
300 |
|
- |
| 7(Silicon as S-IS:228) |
- |
300 |
|
- |
| 7(Nitrogen content -IS:228) |
- |
300 |
|
- |
| 7(Chromium IS 8811: 1998) |
- |
300 |
|
- |
| 7(Nickel IS 8811: 1998) |
- |
300 |
|
- |
| 7(Boron IS 8811: 1998) |
- |
300 |
|
- |
| 7(Titanium IS 8811: 1998) |
- |
300 |
|
- |
| 7(Niobium IS 8811: 1998) |
- |
300 |
|
- |
| 7(Vanadium IS 8811: 1998) |
- |
300 |
|
- |
| 7(Copper IS 8811: 1998) |
- |
300 |
|
- |
| 5.2(Molybednum Astime 1086: 2014) |
- |
300 |
|
- |
| 12.0(Dimention IS 1730:1989) |
- |
600 |
|
- |
|
10 Mar, 2030 |
-
- |
| 12080 |
PIONEER TESTING LABORATORY PRIVATE LIMITED
| 8176806
| IS 2185 : Part 3 (1984) |
Concrete Masonry Units Part 3 Autoclaved Cellular Aerated Concrete Blocks |
All Type |
27500 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 8(Physical requirments) |
- |
0 |
|
- |
| 8.2(Physical requirments-Dimensions-Length) |
- |
500 |
|
- |
| 8.2(Physical requirments-Dimensions-Height) |
- |
500 |
|
- |
| 8.2(Physical requirments-Dimensions-Width) |
- |
500 |
|
- |
| 8.3(Physical requirments- Block density) |
- |
1000 |
|
- |
| 8.4(Physical requirments- Compressive strength) |
- |
4500 |
|
- |
| 8.5(Thermal Conductivity) |
- |
15000 |
|
- |
| 8.6( Drying Shrinkage ) |
- |
5500 |
|
- |
| 8.4, 9.2 & 11.3(Indivisual Moisture Content) |
- |
1000 |
|
- |
| 8.4, 9.2 & 11.3(Indivisual Bulk density) |
- |
500 |
|
- |
| 8.4, 9.2 & 11.3 & Table 1(Indivisual Compressive strength) |
- |
2000 |
|
- |
| 8.3 & 9.1(Indivisual Moisture Content) |
- |
1000 |
|
- |
| 8.3 & 9.1 Table 1(Indivisual Block Density) |
- |
1000 |
|
- |
| 3.2 & 8.2(Indivisual Height) |
- |
500 |
|
- |
| 3.2 & 8.2(Indivisual Width) |
- |
500 |
|
- |
| 3.2 & 8.2(Indivisual Length) |
- |
500 |
|
- |
| 8.6, 9.4 & 11.5(Grade) |
- |
500 |
|
- |
| 3.4(Special Faces) |
- |
500 |
|
- |
| 3.3(Faces & Arises) |
- |
500 |
|
- |
| 3.1(Shape) |
- |
500 |
|
- |
| 8.1.1(General (Exposed wall construction)) |
- |
500 |
|
- |
| 7(SURFACE TEXTURE AND FINISH) |
- |
500 |
|
- |
| 9.3(Thermal Conductivity) |
- |
15000 |
|
- |
| 15(Marking) |
- |
500 |
|
- |
|
10 Mar, 2030 |
-
- |
| 12081 |
PIONEER TESTING LABORATORY PRIVATE LIMITED
| 8176806
| IS 2185 : Part 2 (1983) |
Specification for concrete masonry units: Part 2 hollow and solid lightweight concrete blocks (First Revision) |
All Type |
17500 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 8.7(Moisture Movement) |
- |
2500 |
|
- |
| 8.6(Drying shrinkage) |
- |
5500 |
|
- |
| 8.5, Table 1(Water Absorption) |
- |
1000 |
|
- |
| 8.4, Table 1(Compressive strength) |
- |
4500 |
|
- |
| 8.3(Block Density) |
- |
1000 |
|
- |
| 3.2.5(Thickness of Web) |
- |
500 |
|
- |
| 3.2.5(Face Shell Thickness) |
- |
500 |
|
- |
| 3.2(Width) |
- |
500 |
|
- |
| 3.2(Height) |
- |
500 |
|
- |
| 8.1(General) |
- |
500 |
|
- |
| 8.2(Deimension (Length)) |
- |
500 |
|
- |
| 8.2(Deimension (Height)) |
- |
500 |
|
- |
| 8.2(Deimension (Width)) |
- |
500 |
|
- |
| 8.3(Block Density) |
- |
1000 |
|
- |
| 8.4(Compressive Strength) |
- |
4500 |
|
- |
| 8.5(Water Absorption) |
- |
1000 |
|
- |
| 8.6(Drying Shrinkage) |
- |
5500 |
|
- |
| 8.7(Moisture Movement) |
- |
3000 |
|
- |
|
10 Mar, 2030 |
-
- |
| 12082 |
PIONEER TESTING LABORATORY PRIVATE LIMITED
| 8176806
| IS 2185 : Part 1 (2005) |
Concrete masonry units - Specification: Part 1 hollow and solid concrete blocks (Third Revision) |
All Type |
18500 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 9.1(PHYSICAL REQUIREMENTS-General) |
- |
1000 |
|
- |
| 9.2 & 4.2(PHYSICAL REQUIREMENTS-Nominal Dimensions 1.Length 2.Hight 3. Width) |
- |
1000 |
|
- |
| 9.2 & 4.2.3(Nominal Dimensions-variation in the length of units ) |
- |
1000 |
|
- |
| 9.2 & 4.2.3(Nominal Dimensions -variation in height and width of units ) |
- |
1000 |
|
- |
| 9.2 & 4.2.4, Table-1(Nominal Dimensions-thickness of
the face shell) |
- |
1000 |
|
- |
| 9.2 & 4.2.4, Table-1(Nominal Dimensions-thickness of
the Web shell) |
- |
1000 |
|
- |
| 9.3 & 5.1 & 5.2 Table 2(PHYSICAL REQUIREMENTS-Blocks Density - 1.Hollow (Open and Closed Cavity) Concrete Block- Grade Aor Grade B 2.Solid Concrete Block — Grade C) |
- |
1000 |
|
- |
| 9.4- Table 2(PHYSICAL REQUIREMENTS - Compressive Strength 1.Minimum Average Compressive Strength of Units 2.Minimum Average Compressive Strength of Individual Unit) |
- |
4500 |
|
- |
| 9.5(PHYSICAL REQUIREMENTS -Water Absorption) |
- |
2000 |
|
- |
| 9.6(PHYSICAL REQUIREMENTS -Drying Shrinkage) |
- |
5500 |
|
- |
| 9.7(PHYSICAL REQUIREMENTS -Moisture Movement) |
- |
2500 |
|
- |
| 15(Marking) |
- |
500 |
|
- |
|
10 Mar, 2030 |
-
- |
| 12083 |
PIONEER TESTING LABORATORY PRIVATE LIMITED
| 8176806
| IS 12894 (2002) |
Pulverized fuel ash - Lime bricks - Specification |
All Type |
7800 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 3.1(General Requirements) |
- |
200 |
|
- |
| 3.2(General Requirements) |
- |
200 |
|
- |
| 3.3(General Requirements) |
- |
200 |
|
- |
| 3.4(General Requirements) |
- |
200 |
|
- |
| 3.5(General Requirements) |
- |
200 |
|
- |
| 5.1(Dimensions) |
- |
600 |
|
- |
| 7.1, Table -1(Average Wet Compressive Strength) |
- |
1500 |
|
- |
| 7.2(Drying Shrinkage) |
- |
3500 |
|
- |
| 7.3(Efflorescence Test) |
- |
1000 |
|
- |
| 7.4(Water Absorption) |
- |
1000 |
|
- |
| 5.2(Tolerance) |
- |
200 |
|
- |
| 9(Marking) |
- |
200 |
|
- |
|
10 Mar, 2030 |
-
- |
| 12084 |
PIONEER TESTING LABORATORY PRIVATE LIMITED
| 8176806
| IS 12592 (2002) |
Precast concrete manhole cover and frame - Specification (First Revision) |
All Type |
13500 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 3(Grade) |
- |
500 |
|
- |
| 3(Type/Shape of Cover) |
- |
200 |
|
- |
| 4.4(Reinforcement) |
- |
200 |
|
- |
| 4.4(Reinforcement) |
- |
200 |
|
- |
| 4.5(Steel Fibres - Diameter / equivalent diameterofsteel tibres) |
- |
200 |
|
- |
| 4.5(Steel Fibres - The aspect ratio of the tibres) |
- |
1500 |
|
- |
| 5.2 and Table 1(Dimensions of Frame - A) |
- |
500 |
|
- |
| 5.2 and Table 1(Dimensions of Frame - B) |
- |
500 |
|
- |
| 5.2 and Table 1(Dimensions of Frame - C) |
- |
500 |
|
- |
| 5.2 and Table 1(Dimensions of Frame - D) |
- |
500 |
|
- |
| 5.2 and Table 1(Dimensions of Frame - E) |
- |
500 |
|
- |
| 5.2 and Table 1(Dimensions of Frame - F) |
- |
500 |
|
- |
| 5.2(Dimensions of cover- Diameter) |
- |
500 |
|
- |
| 5.2(Clearance at top between the frame and the cover all round the periphery) |
- |
500 |
|
- |
| 5.2(Top surface ofthe frame and cover is in level) |
- |
500 |
|
- |
| 5.2(Suitable taper matching with taper given for the frame shall be provided to the periphery of the cover) |
- |
500 |
|
- |
| 5.2 and Fig 1(Clear cover to reinforcement) |
- |
500 |
|
- |
| 5.2 and Fig 1(Distance of housing from the edge) |
- |
500 |
|
- |
| 7.4.1(Edge Protection and Finishing - Frame) |
- |
500 |
|
- |
| 7.4.2(Edge Protection and Finishing - Cover) |
- |
500 |
|
- |
| 8(LIFTING HOOKS) |
- |
500 |
|
- |
| 9.1(General) |
- |
500 |
|
- |
| 9.3 and Table and
Annex C(Load Test) |
- |
8000 |
|
- |
| Clause No. 5.2, Figure 1(Typical Illustration of circular precast concrete manhole cover) |
- |
500 |
|
- |
| Clause No. 9.3 Annex C(Adhesion between concrete and reinforcing steel) |
- |
500 |
|
- |
| Clause No. 9.3 Annex C(Cracks at bottom side of the cover ) |
- |
500 |
|
- |
| Clause No. 9.3 Annex C(Permanent set of cover) |
- |
500 |
|
- |
| Clause No. 9.3, 12.3 & C-1.1, Table No. 2(2/3rd of Test Load) |
- |
8000 |
|
- |
| Clause No. 9.3, 12.3 & C-1.1, Table No. 2(Test Load) |
- |
8000 |
|
- |
| Clause No. 8(Lifting Device) |
- |
500 |
|
- |
| Clause No. 8(Lifting Hooks (Diameter of MS rod)) |
- |
500 |
|
- |
| Clause No. 7.4.4(Compatitbilty of Seating of cover and frame) |
- |
500 |
|
- |
| Clause No. 7.4.2(Edge protection and finishing of cover (Thikness of MS sheet)) |
- |
500 |
|
- |
| Clause No. 7.4.2(Edge protection and finishing of cover (Cover finish of top surface)) |
- |
500 |
|
- |
| Clause No. 7.4.1(Edge protection and finishing of frame (Steel connectors)) |
- |
500 |
|
- |
| Clause No. 7.4.1(Edge protection and finishing of frame (Size of mild steel flat)) |
- |
500 |
|
- |
| Clause No. 6(Design) |
- |
0 |
|
- |
|
10 Mar, 2030 |
-
- |
| 12085 |
PIONEER TESTING LABORATORY PRIVATE LIMITED
| 8176806
| IS 6603 (2001) |
Stainless steel bars and flats - Specification (First Revision) |
All type |
16300 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl. 7.1, 7.2, 7.3 & 13.1 Table 1(Carbon -Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.) |
- |
300 |
|
- |
| Cl. 7.1, 7.2, 7.3 & 13.1 Table 1(Silicon- Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.) |
- |
300 |
|
- |
| Cl. 7.1, 7.2, 7.3 & 13.1 Table 1(Manganese- Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.) |
- |
300 |
|
- |
| Cl. 7.1, 7.2, 7.3 & 13.1 Table 1(Nickel -Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.) |
- |
300 |
|
- |
| Cl. 7.1, 7.2, 7.3 & 13.1 Table 1(Chromium- Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.) |
- |
300 |
|
- |
| Cl. 7.1, 7.2, 7.3 & 13.1 Table 1(Molybdenum- Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.) |
- |
300 |
|
- |
| Cl. 7.1, 7.2, 7.3 & 13.1 Table 1(Titanium- Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.) |
- |
300 |
|
- |
| Cl. 7.1, 7.2, 7.3 & 13.1 Table 1(Niobium- Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.) |
- |
300 |
|
- |
| Cl. 7.1, 7.2, 7.3 & 13.1 Table 1(Sulphur- Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.) |
- |
300 |
|
- |
| Cl. 7.1, 7.2, 7.3 & 13.1 Table 1(Phosphorus- Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.) |
- |
300 |
|
- |
| Cl. 7.1, 7.2, 7.3 & 13.1 Table 1(Others (Nitrogen)- Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.) |
- |
300 |
|
- |
| Cl.14.1(Corrosion Resistance- IS 10461(Part1)) |
- |
2500 |
|
- |
| Cl.14.1(Corrosion Resistance- IS 10461(Part2)) |
- |
2500 |
|
- |
| 6(Freedom from defects:) |
- |
300 |
|
- |
| 9.1, Table 3(0.2 Percent Proof Stress, MPa) |
- |
1000 |
|
- |
| 9.2, Table 3(Tensile Strength, MPa) |
- |
1500 |
|
- |
| 9.3, Table 3(Elongation ,Percent) |
- |
1000 |
|
- |
| 9.4, Table 3(Annealed Hardness, HB-IS 1500: Pt 1) |
- |
1800 |
|
- |
| 9.5, Table 3(Charpy Impact Test, J-IS 1499) |
- |
1500 |
|
- |
| 12(Dimensions & Tolerances, mm-IS 6603) |
- |
200 |
|
- |
| 12(Diameter, mm) |
- |
200 |
|
- |
| 12(Out of Round , mm) |
- |
200 |
|
- |
| 12(Length , mm) |
- |
200 |
|
- |
| 12(Variation in Straightness) |
- |
300 |
|
- |
| Cl. 12
Table 9, 11 & 13 (Square Size) |
- |
300 |
|
- |
| Cl. 12
Table 11,13 & 14(Thickness of Flat) |
- |
200 |
|
- |
| Cl. 12
Table 11,13 & 14(Width of Flat) |
- |
200 |
|
- |
| Cl. 12
Table 10 & 13(Hexagonal Size) |
- |
200 |
|
- |
| Cl. 12
Table 9(Out of Square) |
- |
200 |
|
- |
| Cl. 12
Table 10(Maximum Differences in Three Measurements for Hexagons) |
- |
500 |
|
- |
| Cl. 9.3 Table 3(Bend Test) |
- |
700 |
|
- |
| 9.4(Annealed Hardness) |
- |
1500 |
|
- |
| Cl 9.1/Table-3(0.2% proof stress/Yield stress) |
- |
1000 |
|
- |
| Cl 9.1/Table-3(Tensile strength) |
- |
1500 |
|
- |
| Cl 9.1/Table-3(Elongation) |
- |
1000 |
|
- |
| 15(Marking) |
- |
200 |
|
- |
|
10 Mar, 2030 |
-
- |
| 12086 |
PIONEER TESTING LABORATORY PRIVATE LIMITED
| 8176806
| IS 1489 : Part 2 (2015) |
Portland - Pozzolana cement - Specification: Part 2 calcined clay based |
All type |
10500 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 6 - Table - 1 i(Insoluble residue - Cl 7.4 of IS 4032:1985) |
- |
600 |
|
- |
| 6 - Table - 1 ii(Magnesia - Cl 7.2 of IS 4032:1985) |
- |
600 |
|
- |
| 6 - Table - 1 iii(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 7.3 of IS 4032:1985) |
- |
600 |
|
- |
| 6 - Table - 1 iv(Loss on ignition - Cl 7.1 of IS 4032:1985) |
- |
600 |
|
- |
| 6 - Table - 1 v(Chloride content - Cl 4.13 of IS 4032:1985) |
- |
600 |
|
- |
| 6 - Table - 1 vi( Alkali content as (Na2O + 0.658 K2O) - Cl 4.11 of IS 4032:1985) |
- |
600 |
|
- |
| 7 -Table 2- i(Fineness 4031 Part 2) |
- |
500 |
|
- |
| 7 -Table 2- ii- a(Expansion by Le Chatelier- 4031 Part 3) |
- |
500 |
|
- |
| 7 -Table 2- ii- a(Expansion after aeration - 4031 Part 3) |
- |
500 |
|
- |
| 7 -Table 2- ii- b(Expansion by Autoclave- 4031 Part 3) |
- |
500 |
|
- |
| 7 -Table 2- iii- a(Setting Time Initial- 4031 Part 5) |
- |
500 |
|
- |
| 7 -Table 2-iii- b(Setting Time Final- 4031 Part 5) |
- |
500 |
|
- |
| 7 -Table 2- iv- a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6) |
- |
400 |
|
- |
| 7 -Table 2- iv- b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6) |
- |
600 |
|
- |
| 7 -Table 2- iv- c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6) |
- |
800 |
|
- |
| 7 -Table 2- v(Transverse Strength - IS 4031 Part 8 (Optional)) |
- |
1200 |
|
- |
| 7 -Table 2- vi(Drying Shrinkage- IS 4031 Part 10) |
- |
1500 |
|
- |
|
10 Mar, 2030 |
-
- |
| 12087 |
BIS, Central Laboratory (CL)
| None
| IS 15500 : Part 1 to 8 (2021) |
Deepwell Handpumps Components and Special Tools Specification |
- |
4500 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Fig. 6.13 of IS 15500 : PART 6 (2021) (Check Valve Seat-VLOM 65) |
- |
|
|
|
| Fig. 6.12 of IS 15500 : PART 6 (2021) ("Check Valve Seat-Standard (for SDWP & EDWP)") |
- |
|
|
|
| Fig. 6.11 of IS 15500 : PART 6 (2021) ("Rubber Seat Retainer (for SDWP, EDWP & FLP)") |
- |
|
|
|
|
- |
-
- |
| 12088 |
Central Institute of Petrochemicals Engineering & Technology (CIPET), CSTS - Dehradun
| 9178004
| IS 10124 : Part 2 (2009) |
Fabricated pvc - U fittings for potable water supplies - Specification: Part 2 specific requirements for sockets (Second Revision) |
- |
5550.00 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 3.2.2, and Fig. 2(Dimensions of Socket for Elastomeric Sealing Ring Joint) |
- |
0.00 |
|
all dimension have Single Charge and for this dimension we have taken in below parameter. |
| 3.1(General) |
- |
5550.00 |
|
1.Socket length & Diameter at mid point of Socket Length- 500
2. Opacity-700
3. Short Term Hydrostatic pressure test- 850 500
4. Effect on water -3000
5. Dimension of Sockets - 0 |
| 10.3 of IS 4985 & Cl. 3.1 of IS 12235(P-4)(Effect on water: Lead (First Extraction)) |
- |
0.00 |
|
TEST CHARGE FOR THIS PARAMETER ALREADY TAKEN ABOVE. |
| 10.3 of IS 4985 & Cl. 3.1 of IS 12235(P-4)(Effect on water: Lead (Third Extraction)) |
- |
0.00 |
|
TEST CHARGE FOR THIS PARAMETER ALREADY TAKEN ABOVE. |
| 10.3 of IS 4985 & Cl. 3.1 of IS 12235(P-10)(Effect on water:Dialkyl tin C4 and
higher homologues
measured as tin (third
extraction)) |
- |
0.00 |
|
TEST CHARGE FOR THIS PARAMETER ALREADY TAKEN ABOVE. |
| 10.3 of IS 4985 & Cl. 3.2 of IS 12235(P-4)(Effect on water: Cadmium (all three extracts)) |
- |
0.00 |
|
TEST CHARGE FOR THIS PARAMETER ALREADY TAKEN ABOVE. |
| 10.3 of IS 4985 & Cl. 3.2 of IS 12235(P-4)(Effect on water: Mercury (all three extracts)) |
- |
0.00 |
|
TEST CHARGE FOR THIS PARAMETER ALREADY TAKEN ABOVE. |
| 10.3 of IS 4985 & Cl. 3.2 of IS 12235(P-10)(Other toxic substances such as 'di-n-octyl-tin- s-s bis iso-octyl mercapto acetate' and 'butyl stearate' (third extraction)) |
- |
0.00 |
|
TEST CHARGE FOR THIS PARAMETER ALREADY TAKEN ABOVE. |
| 10.7 of IS 4985(Sulphated Ash content, Annex-B of IS 4985) |
- |
0.00 |
|
TEST CHARGE FOR THIS PARAMETER ALREADY TAKEN ABOVE. |
| 3.2.1, Table-1, Fig-1(Nominal size) |
- |
0.00 |
|
TEST CHARGE FOR THIS PARAMETER ALREADY TAKEN ABOVE. |
| 3.2.1, Table-1, Fig-1(B) |
- |
0.00 |
|
TEST CHARGE FOR THIS PARAMETER ALREADY TAKEN ABOVE. |
| 3.2.1, Table-1, Fig-1(Minimum wall thickness for working pressure) |
- |
0.00 |
|
TEST CHARGE FOR THIS PARAMETER ALREADY TAKEN ABOVE. |
| 3.2.1, Table-1, Fig-1(Plumbing) |
- |
0.00 |
|
TEST CHARGE FOR THIS PARAMETER ALREADY TAKEN ABOVE. |
| Clause 3.2.2, and Fig. 2(Nominal size) |
- |
0.00 |
|
TEST CHARGE FOR THIS PARAMETER ALREADY TAKEN ABOVE. |
| Clause 3.2.2, and Fig. 2.(B) |
- |
0.00 |
|
TEST CHARGE FOR THIS PARAMETER ALREADY TAKEN ABOVE. |
| Clause 3.2.2, and Fig. 2.(Minimum wall thickness for working pressure) |
- |
0.00 |
|
TEST CHARGE FOR THIS PARAMETER ALREADY TAKEN ABOVE. |
|
24 Apr, 2027 |
-
VCM Content |
| 12089 |
IDMA LABORATORIES LIMITED, PANCHKULA
| 9123236
| IS 9532 (2023) |
CHAKKA AND SHRIKHAND - SPECIFICATION (First Revision of IS 9532) |
- |
10800 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 6.1.2(Appearance and colours- IS 9532-2023) |
- |
400 |
|
Testing charges Rs 10800/- for Shrikhand only
Testing charges Rs 10000/- for Chakka only |
| 6.1.3(Odour and Flavour- IS 9532-2023) |
- |
400 |
|
NA |
| 6.1.4(Texture and Consistency- IS 9532-2023) |
- |
400 |
|
NA |
| Table 1 clause 6.1.6 (i)(Total solids-IS 11622) |
- |
800 |
|
NA |
| Table 1 clause 6.1.6 (ii)(Milk fat (on drybasis)- IS 11762) |
- |
800 |
|
NA |
| Table 1 clause 6.1.6 (iii)(Milk protein (on dry basis)- IS 11917) |
- |
800 |
|
NA |
| Table 1 clause 6.1.6 (iv)(Titrable acidity (as lactic acid)- 12 Of IS 1479 Part 1) |
- |
800 |
|
NA |
| Table 1 clause 6.1.6 (v)(Total ash (on dry basis) -Annex C of IS 14433) |
- |
800 |
|
NA |
| 6.1.2(Appearance and colours- IS 9532-2023) |
- |
0 |
|
NA |
| 6.1.3(Odour and Flavour- IS 9532-2023) |
- |
0 |
|
NA |
| 6.1.4(Texture and Consistency- IS 9532-2023) |
- |
0 |
|
NA |
| Table 1 clause 6.1.6 (i)(Total solids-IS 11622) |
- |
0 |
|
NA |
| Table 1 clause 6.1.6 (ii)(Milk fat (on drybasis)- IS 11762) |
- |
0 |
|
NA |
| Table 1 clause 6.1.6 (iii)(Milk protein (on dry basis)- IS 11917) |
- |
0 |
|
NA |
| Table 1 clause 6.1.6 (iv)(Titrable acidity (as lactic acid)- 12 Of IS 1479 Part 1) |
- |
0 |
|
NA |
| Table 1 clause 6.1.6 (v)(Total ash (on dry basis) -Annex C of IS 14433) |
- |
0 |
|
NA |
| Table 2 clause 6.1.6 & 6.2.6 (i)(Coliform count) |
- |
800 |
|
NA |
| Table 2 clause 6.1.6 & 6.2.6 (ii)(Staphylococcus aureus(Coagulase positive)) |
- |
800 |
|
NA |
| Table 2 clause 6.1.6 & 6.2.6 (iii)(Yeast & Mould count) |
- |
800 |
|
NA |
| Table 2 clause 6.1.6 & 6.2.6 (iv)(E.coli) |
- |
800 |
|
NA |
| Table 2 clause 6.1.6 & 6.2.6 (v)(Salmonella sp.) |
- |
800 |
|
NA |
| Table 2 clause 6.1.6 & 6.2.6 (vi)(Listeria monocytogenes
/g) |
- |
800 |
|
NA |
| 6.1.2(Appearance and colours- IS 9532-2023) |
- |
0 |
|
NA |
| 6.1.3(Odour and Flavour- IS 9532-2023) |
- |
0 |
|
NA |
| 6.1.4(Texture and Consistency- IS 9532-2023) |
- |
0 |
|
NA |
| Table 1 clause 6.1.6 (i)(Total solids-IS 11622) |
- |
0 |
|
NA |
| Table 1 clause 6.1.6 (ii)(Milk fat (on drybasis)- IS 11762) |
- |
0 |
|
NA |
| Table 1 clause 6.1.6 (iii)(Milk protein (on dry basis)- IS 11917) |
- |
0 |
|
NA |
| Table 1 clause 6.1.6 (iv)(Titrable acidity (as lactic acid)- 12 Of IS 1479 Part 1) |
- |
0 |
|
NA |
| Table 1 clause 6.1.6 (v)(Total ash (on dry basis) -Annex C of IS 14433) |
- |
0 |
|
NA |
| Table 2 clause 6.1.6 & 6.2.6 (i)(Coliform count) |
- |
0 |
|
NA |
| Table 2 clause 6.1.6 & 6.2.6 (ii)(Staphylococcus aureus(Coagulase positive)) |
- |
0 |
|
NA |
| Table 2 clause 6.1.6 & 6.2.6 (iii)(Yeast & Mould count) |
- |
0 |
|
NA |
| Table 2 clause 6.1.6 & 6.2.6 (iv)(E.coli) |
- |
0 |
|
NA |
| Table 2 clause 6.1.6 & 6.2.6 (v)(Salmonella sp.) |
- |
0 |
|
NA |
| Table 2 clause 6.1.6 & 6.2.6 (vi)(Listeria monocytogenes
/g) |
- |
0 |
|
NA |
| 6.1.2(Appearance and colours- IS 9532-2023) |
- |
0 |
|
- |
| 6.1.3(Odour and Flavour- IS 9532-2023) |
- |
0 |
|
- |
| 6.1.4(Texture and Consistency- IS 9532-2023) |
- |
0 |
|
- |
| Table 1 clause 6.1.6 (i)(Total solids-IS 11622) |
- |
0 |
|
- |
| Table 1 clause 6.1.6 (ii)(Milk fat (on drybasis)- IS 11762) |
- |
0 |
|
- |
| Table 1 clause 6.1.6 (iii)(Milk protein (on dry basis)- IS 11917) |
- |
0 |
|
- |
| Table 1 clause 6.1.6 (iv)(Titrable acidity (as lactic acid)- 12 Of IS 1479 Part 1) |
- |
0 |
|
- |
| Table 1 clause 6.1.6 (v)(Total ash (on dry basis) -Annex C of IS 14433) |
- |
0 |
|
- |
| Table 2 clause 6.1.6 & 6.2.6 (i)(Coliform count) |
- |
0 |
|
- |
| Table 2 clause 6.1.6 & 6.2.6 (ii)(Staphylococcus aureus(Coagulase positive)) |
- |
0 |
|
- |
| Table 2 clause 6.1.6 & 6.2.6 (iii)(Yeast & Mould count) |
- |
0 |
|
- |
| Table 2 clause 6.1.6 & 6.2.6 (iv)(E.coli) |
- |
0 |
|
- |
| Table 2 clause 6.1.6 & 6.2.6 (v)(Salmonella sp.) |
- |
0 |
|
- |
| Table 2 clause 6.1.6 & 6.2.6 (vi)(Listeria monocytogenes
/g) |
- |
0 |
|
- |
| 6.1.2(Appearance and colours- IS 9532-2023) |
- |
0 |
|
- |
| 6.1.3(Odour and Flavour- IS 9532-2023) |
- |
0 |
|
- |
| 6.1.4(Texture and Consistency- IS 9532-2023) |
- |
0 |
|
- |
| Table 1 clause 6.1.6 (i)(Total solids-IS 11622) |
- |
0 |
|
- |
| Table 1 clause 6.1.6 (ii)(Milk fat (on drybasis)- IS 11762) |
- |
0 |
|
- |
| Table 1 clause 6.1.6 (iii)(Milk protein (on dry basis)- IS 11917) |
- |
0 |
|
- |
| Table 1 clause 6.1.6 (iv)(Titrable acidity (as lactic acid)- 12 Of IS 1479 Part 1) |
- |
0 |
|
- |
| Table 1 clause 6.1.6 (v)(Total ash (on dry basis) -Annex C of IS 14433) |
- |
0 |
|
- |
| Table 2 clause 6.1.6 & 6.2.6 (i)(Coliform count) |
- |
0 |
|
- |
| Table 2 clause 6.1.6 & 6.2.6 (ii)(Staphylococcus aureus(Coagulase positive)) |
- |
0 |
|
- |
| Table 2 clause 6.1.6 & 6.2.6 (iii)(Yeast & Mould count) |
- |
0 |
|
- |
| Table 2 clause 6.1.6 & 6.2.6 (iv)(E.coli) |
- |
0 |
|
- |
| Table 2 clause 6.1.6 & 6.2.6 (v)(Salmonella sp.) |
- |
0 |
|
- |
| Table 2 clause 6.1.6 & 6.2.6 (vi)(Listeria monocytogenes
/g) |
- |
0 |
|
- |
|
31 Dec, 2029 |
-
Included w.e.f 06.09.2024 |
| 12090 |
PIONEER TESTING LABORATORY PRIVATE LIMITED
| 8176806
| IS 2202 : Part 1 (1999) |
Wooden flush door shutters (Solid Core Type) - Specification: Part 1 plywood face panels (Sixth Revision) |
All type |
20500 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 11.15(Screw Withdrawal Strength - IS 4020 (Pt-16)) |
- |
1000 |
|
- |
| 11.15(Screw Withdrawal Resistance test - IS 4020 (Pt-16)) |
- |
1000 |
|
- |
| 11.14(Glue Adhesion Test - IS 4020(Pt-15)) |
- |
1200 |
|
- |
| 11.13(Knife Test - IS 4020(Pt-14)) |
- |
1000 |
|
- |
| 11.12(End Immersion Test - IS 4020(Pt-13)) |
- |
1500 |
|
- |
| 11.11(The recovery of the original size after subjecting the door to high and low humidity- IS 4020(Pt-12)) |
- |
2000 |
|
- |
| 11.11(Maximum departure from the general planeness - IS 4020(Pt-12)) |
- |
2000 |
|
- |
| 11.11(Varying Humidity Test - IS 4020(Pt-12)) |
- |
2000 |
|
- |
| 11.1(Misuse Test - IS 4020(Pt-11)) |
- |
2500 |
|
- |
| 11.9(Slamming Test - IS 4020(Pt-10)) |
- |
1500 |
|
- |
| 11.8(Residual deformation after 15 minutes of unloading - IS 4020(Pt-9)) |
- |
1000 |
|
- |
| 11.8(Initial deflection - IS 4020(Pt-9)) |
- |
1000 |
|
- |
| 11.8(Buckling Test - IS 4020(Pt-9)) |
- |
1000 |
|
- |
| 11.7(Shock Resistance Test -IS 4020(Pt-8)) |
- |
2000 |
|
- |
| 11.7(Shock Resistance Test -IS 4020(Pt-8)) |
- |
2000 |
|
- |
| 11.6(Residual lateral buckling - IS 4020(Pt-7)) |
- |
750 |
|
- |
| 11.6(Lateral buckling during loading - IS 4020(Pt-7)) |
- |
750 |
|
- |
| 11.6(Residual deflection after removal of load - IS 4020(Pt-7)) |
- |
750 |
|
- |
| 11.6(Deflection of the edge at maximum load - IS 4020(Pt-7)) |
- |
750 |
|
- |
| 11.5(Residual deflection - IS 4020(Pt-6)) |
- |
1250 |
|
- |
| 11.4(Depth of indentation - IS 4020(Pt-5)) |
- |
1250 |
|
- |
| 11.4(Impact Indentation Test - IS 4020(Pt-5)) |
- |
1250 |
|
- |
| 11.3(Depth of deviation - IS 4020(Pt-4)) |
- |
400 |
|
- |
| 11.2( Twist, cupping & wrapping - IS 4020 (Pt-3)) |
- |
400 |
|
- |
| 11.1( Squareness Test - IS 4020 (Pt-2)) |
- |
300 |
|
- |
| 11.1(Variation in thickness - IS 4020 (Pt-2)) |
- |
200 |
|
- |
| 11.1(Thickness - IS 4020 (Pt-2)) |
- |
200 |
|
- |
| 11.1(Width- IS 4020 (Pt-2)) |
- |
200 |
|
- |
| 11.1(Height - IS 4020 (Pt-2)) |
- |
200 |
|
- |
| 9.3(Workmanship & finish - IS 2202(Pt-1)) |
- |
200 |
|
- |
| 9.2(Workmanship & finish - IS 2202(Pt-1)) |
- |
200 |
|
- |
| 6.2(Plywood) |
- |
0 |
|
- |
| 6.3(Cross-Band) |
- |
0 |
|
- |
| 6.4(Cross-Bands) |
- |
0 |
|
- |
| 6.7(Particle Board) |
- |
0 |
|
- |
| 6.8(Medium Density Fibre
(MDF) Board) |
- |
0 |
|
- |
|
10 Mar, 2030 |
-
- |
