BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

15122 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

2671

Perfect International Testing Lab

8187826

IS 16242 : Part 1 (2025)

Uninterruptible power systems UPS Part 1 Safety requirements (first revision)

95000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4.2(Fault and abnormal conditions)	-	1000	N/A
Cl-4.3(Short-circuit and overload protection)	-	500	N/A
Cl-4.3.101(AC input current)	-	500	N/A
Cl-4.3.102(Transformer protection)	-	1000	N/A
Cl-4.3.103(AC input short-circuit current)	-	500	N/A
Cl-4.3.104(Protection of the energy storage device)	-	500	N/A
Cl-4.3.105(Unsynchronised load transfer)	-	1000	N/A
Cl-4.4(Protection against electric shock)	-	1000	N/A
Cl-4.4.2.2.2(Selection tables for contact area and skin humidity condition)	-	1000	N/A
Cl-4.4.3.3(Protection by means of enclosures or barriers- Openings)	-	1000	N/A
Cl-4.4.7.1.1(Influencing factors)	-	1000	N/A
Cl-4.4.7.1.2(Pollution degree)	-	500	N/A
Cl-4.4.7.1.3(Overvoltage category (OVC))	-	1000	N/A
Cl-4.4.7.7(PWB spacings for functional insulation)	-	1000	N/A
Cl-4.4.9(Capacitor discharge)	-	3000	N/A
Cl-4.5.2(Service access areas)	-	1000	N/A
Cl-4.6(Protection against fire and thermal hazards)	-	1000	N/A
Cl-4.6.2.2(Components within a circuit representing a fire hazard)	-	2000	N/A
Cl-4.6.3.1(General)	-	1000	N/A
Cl-4.6.3.2(Flammability of enclosure materials)	-	1000	N/A
Cl-4.6.3.3.2(Openings in the top and side of fire enclosures)	-	500	N/A
Cl-4.6.4.1(Temperature limits- Internal parts)	-	500	N/A
Cl- 4.6.5(Limited power sources)	-	3000	N/A
Cl-4.7(Protection against mechanical hazards)	-	1000	N/A
Clause 4(Protection against hazards)	-	1000	N/A
Cl-4.7.101(Protection in service access area)	-	1000	N/A
Clause 5(Test requirements)	-	1000	N/A
Cl-4.8 .101(Equipment with multiple sources of supply- General)	-	1000	N/A
Clause 5.2.2(Mechanical tests)	-	1000	N/A
Clause 5.2.3(Electrical tests)	-	1000	N/A
Cl-4.9(Protection against environmental stresses)	-	1000	N/A
Cl-4.10(Protection against sonic pressure hazards)	-	500	N/A
Clause 5.2.4("Abnormal operation tests")	-	500	N/A
Cl-4.11(Wiring and connections)	-	500	N/A
Clause 5.2.5(Material tests)	-	1000	N/A
Clause 5.2.6(Environmental tests)	-	1000	N/A
Cl-4.11.101.1(Non-detachable cords- Cord guard)	-	1000	N/A
Clause 5.2.7(Hydrostatic pressure test)	-	2000	N/A
Cl-4.11.101.2(Cord anchorages and strain relief)	-	1000	N/A
Clause 6(Information and marking requirements)	-	2000	N/A
Cl-4.101.1(Emergency switching (disconnect) device)	-	2000	N/A
Clause 6.1.101(Durability)	-	1000	N/A
Cl-4.101.2(Normal disconnect devices)	-	1000	N/A
Cl-4.102.1(Stored energy source- General)	-	1000	N/A
Cl-4.102.2(Accessibility and maintainability)	-	2000	N/A
Cl-4.102.3(Distance between battery cells)	-	1000	N/A
Cl- 4.102.5(Electrolyte spillage)	-	1000	N/A
Cl- 4.102.6(Ventilation and hydrogen concentration)	-	2000	N/A
Cl- 4.102.8.1(Overcurrent and earth fault protection)	-	1000	N/A
Cl- 4.102.8.2(Location of protective devices)	-	2000	N/A
Cl-4.102.8.3(Rating of protective devices)	-	2000	N/A
Cl-4.103(UPS connection to telecommunication lines)	-	2000	N/A
Cl-5.1.5.3(Operating parameters for tests)	-	1000	N/A
Cl-5.1.7(Test overview)	-	1000	N/A
Cl-5.2.2.2(Non-accessibility test)	-	1000	N/A
Cl-5.2.2.4.4(Drop test)	-	1000	N/A
Cl-4.8.102(Backfeed protection)	-	3000	N/A
Cl- 4.102.7(Charging voltages)	-	1000	N/A
Cl-5.2.2.6.101(Wall or ceiling mounted equipment test)	-	2000	N/A
Cl-5.2.2.6.102(Rack mounted equipment test)	-	2000	N/A
Cl-5.2.2.101(Cord guard test)	-	1000	N/A
Cl-5.2.3.9(Limited power source test)	-	2000	N/A
Cl-5.2.3.10(Temperature rise test)	-	1000	N/A
Cl-5.2.3.101.1(Backfeed protection test- General)	-	2000	N/A
Cl-5.2.3.101.2(Test for pluggable UPS)	-	1000	N/A
Cl-5.2.3.101.3(Test for permanently connected UPS)	-	2000	N/A
Cl-5.2.3.101.4(Method to simulate the load-induced change of reference potential for pluggable UPS)	-	1000	N/A
Cl-5.2.3.101.5(Solid-state backfeed protection)	-	500	N/A
Cl-5.2.3.102(Input current test)	-	1000	N/A
Cl-5.2.3.103(Short-time withstand current test)	-	500	N/A
Cl-5.2.3103.3(Input port short-time withstand current rating)	-	500	N/A
Cl-5.2.3.104(Transformer protection test)	-	500	N/A
Cl- 5.2.3.105(Unsynchronised load transfer test)	-	500	N/A
Cl-5.2.4.1(Abnormal operation and simulated faults tests- General)	-	500	N/A
Cl-5.2.6.4(Vibration test)	-	2000	N/A
Cl-5.2.6.5(Salt mist test)	-	1000	N/A
Cl-5.2.6.6(Dust and sand test)	-	1000	N/A
Cl-6(Information and marking requirements)	-	500	N/A

02 Sep, 2028

-
Included w.e.f 07.11.2025

2672

Samridhi Test House Pvt. Ltd.

8184706

IS 5145 (1969)

Specification for walking sticks

All Grade / Type / Size / Designation etc.

3900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-2.1(Wood)	-	1000	-
Cl.2.2(ALUMINIUM)	-	0	-
Cl.4(MANUFACTURE)	-	200	-
Cl.5(WORKMANSHIP AND FINISH)	-	200	-
Cl.6.1(STRENGTH TEST)	-	600	-
Cl.7(MARKING)	-	200	-
Cl.8(PACKING)	-	200	-
Cl-3(Shapes and Dimensions)	-	100	-
Cl-6.2.1(Strength of joint between handle and the stick)	-	600	-

-
Included w.e.f 29.10.2025 Exclusion Cl.2.2 (ALUMINIUM)

2673

Bharat Test House Pvt Ltd 781 Sonipat Haryana

9137826

IS 15787 (2025)

Switched Socket-Outlets without Interlock for Fixed Installations- Particular Requirements ( First Revision )

Switched Socket-Outlets without Interlock for Fixed Installations- Particular Requirements

24000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4(General Requirements)	-	100	-
Cl-6(Rating)	-	100	-
Cl-8(Marking)	-	200	-
Cl-9(Checking of Dimensions)	-	500	-
Cl-10(Protection against electric shock)	-	500	-
Cl-11(Provision for earthing)	-	500	-
Cl-12(Terminals)	-	1000	-
Cl-13(Construction of fixed socket-outlet)	-	1000	-
Cl-14(Construction of plugs and portable socket-outlets)	-	0	-
Cl-16(Resistance to ageing, harmful ingress of water and to humidity)	-	1500	-
Cl-17(Insulation resistance & electric strength)	-	500	-
Cl-18(Operation of earthing contacts)	-	400	-
Cl-19(Temperature rise)	-	3000	-
Cl-20(Breaking capacity)	-	3000	-
Cl-21(Normal operation)	-	4000	-
Cl-22(Force necessary to withdraw the plug)	-	500	-
Cl-24(Mechanical strength)	-	3000	-
Cl-25(Resistance to heat)	-	1000	-
Cl-26(Screws, current carrying parts and connections)	-	500	-
Cl-27(Creepage distance & clearances & distance through sealing compound)	-	500	-
Cl-28(Resistance of Insulating material to abnormal heat, fire and tracking)	-	1000	-
Cl-29(Resistance to rusting)	-	800	-
Cl-17.3(Electric Strength (Flash Test))	-	200	-

31 Dec, 2026

-
Included w.e.f 04.11.2025

2674

Atckon Laboratories LLP, Bahadurgarh

8186436

IS 210 (2009)

Grey iron castings - Specification (First Revision)

ALL TYPES

4000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Chemical Composition(chemical composition shall be as agreed to between the purchaser and the manufacturer.))	-	4000	-
7.1(WORKMANSHIP AND FINISH)	-	4000	-
10.1(FREEDOM FROM DEFECTS)	-	4000	-
10.2(FREEDOM FROM DEFECTS)	-	4000	-
13(SIZE OF TEST BARS-Diameter)	-	4000	-
13(SIZE OF TEST BARS-Length)	-	4000	-
15, Table 3(TENSIL.E TEST- IS 1608 Part1 )	-	4000	-
16, Table 3(Hardness Test)	-	4000	-
17,Annex B(TRANSVERSE TEST)	-	4000	-
18(HYDROSTATIC TEST)	-	4000	-
6(Chemical Composition(chemical composition shall be as agreed to between the purchaser and the manufacturer.))	-	4000	-
7.1(WORKMANSHIP AND FINISH)	-	4000	-
10.1(FREEDOM FROM DEFECTS)	-	4000	-
10.2(FREEDOM FROM DEFECTS)	-	4000	-
13(SIZE OF TEST BARS-Diameter)	-	4000	-
13(SIZE OF TEST BARS-Length)	-	4000	-
15, Table 3(TENSIL.E TEST- IS 1608 Part1 )	-	4000	-
16, Table 3(Hardness Test)	-	4000	-
17,Annex B(TRANSVERSE TEST)	-	4000	-
18(HYDROSTATIC TEST)	-	4000	-
9(IS 7754)	-	4000	-
9(IS 7754)	-	4000	-
9(Microstructure)	-	4000	-
21(Marking)	-	4000	-
9(Microstructure)	-	4000	-
7.2(Casting dimensions)	-	4000	-
Cl-6(Phosprorus (P) - IS 12308 ( P-5))	-	4000	-

-
Included w.e.f. 09.10.2025

2675

BIS, Central Laboratory (CL)

None

IS 64 (2023)

Barium sulphate pigments for paints - Specification (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-5.1 (Form and Condition)	-
Cl-5.2 (Lead Restriction)	-
Cl-5.4, Table 1 (i) (a) (Barium (as BaSO4), percent by mass, Min)	-
Cl-5.4, Table 1 (i) (b) (Carbonates (as BaCO3), percent by mass, Max)	-
Cl-5.4, Table 1 (ii) (Volatile matter, percent by mass, Max)	-
Cl-5.4, Table 1 (iii) (Residue on sieve, percent by mass, Max)	-
Cl-5.4, Table 1 (iv) (Oil absorption)	-
Cl-5.4, Table 1 (v) (Colour)	-
Cl-5.4, Table 1 (vi) (Matter soluble in water, percent by mass, Max)	-
Cl-5.4, Table 1 (vii) (pH of the aqueous extract)	-
Cl-5.4, Table 1 (viii) (Relative density at 25/25 °C,)	-

-
All except Toxic Heavy Metal Restriction

2676

Hindustaan Testing Solutions LLP, Ambala

9122136

IS 1341 (2018)

Steel Butt Hinges - Specification (Sixth Revision)

All

3600 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3 Tables 2 to 9(Types)	-	100	20% Discount to BIS
5.1 Tables 2 to 9 (2)(Size of Hinge)	-	100	-
5.1 Tables 2 to 9 (3)(Length A)	-	200	-
5.1 Tables 2 to 9 (4)(Breadth B)	-	200	-
5.1 Tables 2 to 9 (4)(Breadth B1)	-	200	-
5.1 Tables 2 to 9 (4)(Breadth B2)	-	200	-
5.1 Tables 2 to 9 (5)(Thickness of Flap C)	-	200	-
5.1 Tables 2 to 9 (6)(Diameter of Hinge Pin D)	-	200	-
5.1 Tables 2 to 9 (7)(Number of Knuckles)	-	200	-
5.1 Tables 2 to 9 (8)(Number of Screw Holes)	-	200	-
5.1 Tables 2 to 9 (9)(Holes for Screw No.)	-	200	-
6.1(General)	-	100	-
6.1(General)	-	100	-
6.1(General)	-	100	-
6.2.1(Knuckles)	-	200	-
6.3(Pins)	-	200	-
6.4(Screw Holes)	-	200	-
6.4.2(Position of Holes)	-	200	-
6.4.2(X)	-	100	-
6.4.2(Y)	-	100	-
6.4.2(Z)	-	100	-
6.4.2.1(Position of Holes)	-	100	-
7(Finish)	-	100	-
8(Marking)	-	0	-
3 Tables 2 to 9(Types)	-	0	-
5.1 Tables 2 to 9 (2)(Size of Hinge)	-	0	-
5.1 Tables 2 to 9 (3)(Length A)	-	0	-
5.1 Tables 2 to 9 (4)(Breadth B)	-	0	-
5.1 Tables 2 to 9 (4)(Breadth B1)	-	0	-
5.1 Tables 2 to 9 (4)(Breadth B2)	-	0	-
5.1 Tables 2 to 9 (5)(Thickness of Flap C)	-	0	-
5.1 Tables 2 to 9 (6)(Diameter of Hinge Pin D)	-	0	-
5.1 Tables 2 to 9 (7)(Number of Knuckles)	-	0	-
5.1 Tables 2 to 9 (8)(Number of Screw Holes)	-	0	-
5.1 Tables 2 to 9 (9)(Holes for Screw No.)	-	0	-
6.1(General)	-	0	-
6.1(General)	-	0	-
6.1(General)	-	0	-
6.2.1(Knuckles)	-	0	-
6.3(Pins)	-	0	-
6.4(Screw Holes)	-	0	-
6.4.2(Position of Holes)	-	0	-
6.4.2(X)	-	0	-
6.4.2(Y)	-	0	-
6.4.2(Z)	-	0	-
6.4.2.1(Position of Holes)	-	0	-
7(Finish)	-	0	-
8(Marking)	-	0	-

12 Sep, 2028

-
Included w.e.f. 29.10.2025 Excluding (Material)

2677

Indian Oil Corporation Ltd (IOCL), Madurai Smart Laboratory

6194114

IS 16861 (2018)

High flash high speed diesel fuel - Specification

19480 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.3-Table 1-i)(Appearance)	-	200	Excluding GST and applicable for financial year 2025-26
3.3-Table 1-ii)(Acid Number, mg KOH/g, Max)	-	2270	Excluding GST and applicable for financial year 2025-26
3.3-Table 1-iii)(Ash, percent by mass, Max)	-	2070	Excluding GST and applicable for financial year 2025-26
3.3-Table 1-vi)(Pour Point2), Max a) Winter b) Summer)	-	1900	Excluding GST and applicable for financial year 2025-26
3.3-Table 1-vii)(Copper strip Corrosion for 3 h at 100°C)	-	1130	Excluding GST and applicable for financial year 2025-26
3.3-Table 1-ix)(Flash Point Pensky Martens closed cup °C, Min)	-	1900	Excluding GST and applicable for financial year 2025-26
3.3-Table 1-x)(Kinematic viscosity, cSt, at 40°C)	-	2270	Excluding GST and applicable for financial year 2025-26
3.3-Table 1-xi)(Density3) at 15°C, kg/m3 , Max)	-	1130	Excluding GST and applicable for financial year 2025-26
3.3-Table 1-xii)(Total sulphur4), % by mass, Max)	-	4710	Excluding GST and applicable for financial year 2025-26
3.3-Table 1-xiv)(Cold filter plugging point (CFPP), °C)	-	1900	Excluding GST and applicable for financial year 2025-26

19 Dec, 2028

-
Excluding: 3.1 (General) 3.2 (Composition) 3.3-Table 1-iv) (Carbon residue on the 10 percent Volume Distillation Residue, mass %, Max) 3.3-Table 1-viii) (Distillation, percent (v/v), recovered a) at 350°C, Min b) at 370°C Min) 3.3-Table 1-xv) (Oxidation Stability5), g/m3 , Max) 3.3-Table 1-xvi) (Lubricity6), Corrected WSD at 60°C, microns max) 5.1 (Packing) 5.2 (Marking) 3.3-Table 1-v) (Cetane index1), Min)3.3-Table 1-xiii) (Water content, ppm, max.)

2678

COCHIN SMART LABORATORY (IOCL)

6193614

IS 1571 (2018)

Aviation turbine fuels, kerosine type, jet - A - 1 - Specification (Tenth Revision)

33200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-3.2.2, 3.2.6, Table-1 (a)(Visual appearance)	-	200	-
Cl-3.2.2, 3.2.6, Table-1 (B)(Colour)	-	200	-
Cl-3.2.2, 3.2.6, Table-1, (iii) (c)(Density at 15°C,kg/m3)	-	1130	-
Cl-3.2.2, 3.2.6, Table-1, (ii) (c)(Total sulphur percent by mass, Max)	-	4710	-
Cl-3.2.2, 3.2.6, Table-1, (vi) (a)(Copper strip corrosion for 2 h at 100°C)	-	1130	-
Cl-3.2.2, 3.2.6, Table-1, (iii) (a), 1)(Distillation:- Initial boiling point, °)	-	2650	-
Cl-3.2.2, 3.2.6, Table-1, (iii) (a), 2)(Distillation:- 10 percent recovery °Cv/,v , Max)	-	2650	-
Cl-3.2.2, 3.2.6, Table-1, (iii) (a), 3)(Distillation:- 50 percent recovery °C, v/v)	-	2650	-
Cl-3.2.2, 3.2.6, Table-1, (iii) (a), 3)(Distillation:- 50 percent recovery °C, v/v)	-	2650	-
Cl-3.2.2, 3.2.6, Table-1, (iii) (a), 4)(Distillation:- 90 percent recovery °C, v/v)	-	2650	-
Cl-3.2.2, 3.2.6, Table- 1, (iii) (a), 5)(Distillation:- Final boiling point,°C, Max)	-	2650	-
Cl-3.2.2, 3.2.6, Table-1, (iii) (a), 7)(Distillation:- Loss, percent v/v, Max)	-	2650	-
Cl-3.2.2, 3.2.6, Table-1, (iii) (a), 6)(Distillation:- Residue, percent v/v, Max)	-	2650	-
Cl-3.2.2, 3.2.6, Table-1, (iv) (b)(Fluidity:- Kinematic viscosity at minus 20°C, mm2/s, Max)	-	2270	-
Cl-3.2.2, 3.2.6, Table-1, (ii) (b)(Aromatics, percent by vol (Defense requirements))	-	2650	-
Cl-3.2.2, 3.2.6, Table-1, (v) (b) 2)(Naphthalenes, percent v/v, Max)	-	2650	-
Cl-3.2.2, 3.2.6, Table-1, (vi) (b)("Silver stripcorrosion12) classification, for 4 h at 50°C, Max")	-	1340	-
Cl-3.2.2, 3.2.6, Table-1, (v) (b)(Smoke point, mm, Min or)	-	1130	-
Cl-3.2.2, 3.2.6, Table-1, (iii) (b)(Flash point ( Abel ), °C, Min)	-	1900	-
Cl-3.2.2, 3.2.6, Table-1, (ix) a)(Water reaction: Interface rating16), Max)	-	780	-
Cl-3.2.2, 3.2.6, Table-1, (x)(Conductivity: Electrical conductivity, pS/m19))	-	1340	-
Cl-3.2.2, 3.2.6, Table-1, (viii)(Contaminants: Existent gum, mg/100 ml, Max)	-	2070	-
Cl-3.2.2, 3.2.6, Table- 1, (iv) (a)(Fluidity:- Freezing point, °C, Max)	-	2270	-
Cl-3.2.2, 3.2.6, Table-1, (ii) (a)(Total acidi,t y mg KOHM/ga, x)	-	1530	-
Cl-3.2.2, 3.2.6, Table-1, (ii) (d)(Sulphur mercaptan, percent m/m. Max)	-	1900	-
Cl-3.2.2, 3.2.6, Table-1, (ii) (e)(Doctor Test)	-	400	-
Cl-3.2.2, 3.2.6, Table-1, (ii) (c)(Total sulphur percent by mass, Max (Defense requirements))	-	4710	-
Cl-3.2.2, 3.2.6, Table-1, (ii) (d)(Sulphur mercaptan, percent m/m. (Defense requirements))	-	1900	-
Cl-3.2.2, 3.2.6, Table-1, (vi) (b)(Silver stripcorrosion12) classification, for 4 h at 50°C, (Defense requirements))	-	1340	-
Amendment No.5 Table 3 Clause G-2.5 iii(Aromatics)	-	2650	-
Amendment No.5 Table 3 Clause G-2.5 iv(Volatility- Distillation-T50 to T10, ℃)	-	2650	-
Amendment No.5 Table 3 Clause G-2.5 iv(Volatility- Distillation-T90 to T10, ℃)	-	2650	-

15 Dec, 2028

-
Exclusion: Amendment No.5 Table 3 Clause G-2.5 i (Annex B VTR) Amendment No.5 Table 3 Clause G-2.5 i (Annex C ITR or Annex D ETR, average over an area of 2.5 mm2) Amendment No.5 Table 3 Clause G-2.5 i (Pressure differential) Amendment No.5 Table 3 Clause G-2.5 i (Test temperature for 2.5 h) Amendment No.5 Table 3 Clause G-2.5 i (Thermal stability) Amendment No.5 Table 3 Clause G-2.5 i (Tube Rating) Amendment No.5 Table 3 Clause G-2.5 ii (Fluidity-Freezing point) Amendment No.5 Table 3 Clause G-2.5 ii (Fluidity-Viscosity at - 40 ℃) Amendment No.5 Table 3 Clause G-2.5 v (Lubricity) Amendment No.5 Table 3 Clause G-2.5 vi (Unconverted fatty acid esters and fatty acids) Cl-3.1 (General-Material) Cl-3.2 (Composition) Cl-3.2.1 (Antioxidants) Cl-3.2.2 (Metal Deactivator Additive (MDA)) Cl-3.2.2, 3.2.6, Table- 1, (xi) (Lubricity: Wear scar diameter, mm (defense requirements)) Cl-3.2.2, 3.2.6, Table- 1, (xi) (Lubricity: Wear scar diameter, mm, Max) Cl-3.2.2, 3.2.6, Table-1 (c) (Particulate contamination, at point of 1.02) manufacture, mg/l, Max) Cl-3.2.2, 3.2.6, Table-1 (d) 1) (Particulate, at point of manufacture, cumulative channel particle counts:- ≥ 4 μm©) Cl-3.2.2, 3.2.6, Table-1 (d) 2) (Particulate, at point of manufacture, cumulative channel particle counts:- ≥6 μm(c) Cl-3.2.2, 3.2.6, Table-1 (d) 3) (Particulate, at point of manufacture, cumulative channel particle counts:- ≥14 μm©) Cl-3.2.2, 3.2.6, Table-1 (d) 4) (Particulate, at point of manufacture, cumulative channel particle counts:- ≥21 μm©) Cl-3.2.2, 3.2.6, Table-1 (d) 5) (Particulate, at point of manufacture, cumulative channel particle counts:-≥25 μm©) Cl-3.2.2, 3.2.6, Table-1 (d) 6) (Particulate, at point of manufacture, cumulative channel particle counts:- ≥30 μm©) Cl-3.2.2, 3.2.6, Table-1, (ii) (b) ("Aromatics, percent by volMumaex, or Total Aromatics, percent by volume, Max") Cl-3.2.2, 3.2.6, Table-1, (ii) (f), 1) ("Refining components, at the point of manufacture8) :- Non Hydro processed Components, percent v/v") Cl-3.2.2, 3.2.6, Table-1, (ii) (f), 2) ("Refining components, at the point of manufacture8) :- Mildly Hydro processed Components, percent v/v") Cl-3.2.2, 3.2.6, Table-1, (ii) (f), 3) ("Refining components, at the point of manufacture8) :- Severely Hydro processed Components, percent v/v") Cl-3.2.2, 3.2.6, Table-1, (ii) (f), 4) ("Refining components, at the point of manufacture8) :- Synthetic Components, percenvt/ v") Cl-3.2.2, 3.2.6, Table-1, (ix) b), 1) ("Micro-separometer rating18) at the point of manufacture: - MSEP without SDA, Min") Cl-3.2.2, 3.2.6, Table-1, (ix) b), 2) ("Micro-separometer rating18) at the point of manufacture: MSEP with SDA, Min") Cl-3.2.2, 3.2.6, Table-1, (v) (a) (Specific energy10) MJ/kg, Min) Cl-3.2.2, 3.2.6, Table-1, (vii) (a) (Filter pressure differential, mm Hg, Max) Cl-3.2.2, 3.2.6, Table-1, (vii) (b) 1) (Tube rating, visual (VTR)) Cl-3.2.2, 3.2.6, Table-1, (vii) (b) 2) (ITR or ETR, average over area of 2.5 mm2 in nm) Cl-3.2.2, 3.2.6, Table-1, (xii) (Identified Incidental Materials :- Fatty Acid Methyl Ester, mg/kg, Max) Cl-3.2.3 (Static Dissipater Additive (SDA)) Cl-3.2.4 (Lubricity Improver Additive (LIA)) Cl-3.2.5 (Fuel System Icing Inhibitor (FSII)) Cl-3.2.7 (Leak Detection Additive) Cl-5.2 (Marking)

2679

Indian Oil Corporation Ltd (IOCL), Madurai Smart Laboratory

6194114

IS 15607 (2022)

Biodiesel B-100 - Fatty Acid Methyl Esters FAME Specification Second Revision

18340 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.4-Table 1-i)(Appearance, visual)	-	200	Excluding GST and applicable for financial year 2025-26
4.4-Table 1-iii)(Density at 15 °C, kg/m3)	-	1130	Excluding GST and applicable for financial year 2025-26
4.4-Table 1-iv)(Kinematic viscosity at 40 °C, cSt)	-	2270	Excluding GST and applicable for financial year 2025-26
4.4-Table 1-v)(Flash point (PMCC)1) °C, Min)	-	1900	Excluding GST and applicable for financial year 2025-26
4.4-Table 1-vi)(Total Sulphur, mg/kg, Max)	-	4710	Excluding GST and applicable for financial year 2025-26
4.4-Table 1-ix)(Water content mg/kg, Max)	-	3960	Excluding GST and applicable for financial year 2025-26
4.4-Table 1-xiii)(Acid value, mg KOH/g, Max)	-	2270	Excluding GST and applicable for financial year 2025-26
4.4-Table 1-xxvi)(Cold filter plugging point (CFPP), °C Max a) summer 18 – Part 110 b) winter3))	-	1900	Excluding GST and applicable for financial year 2025-26

19 Dec, 2028

-
Excluding: 4.1 (General) 4.2 (Additives) 4.3 (The materials shall be free from grit) 4.4-Table 1-ii) (Colour, visual) 4.4-Table 1-vii) (Carbon residue (MCR) 2) percent by mass, Max) 4.4-Table 1-viii) (Sulfated ash, percent by mass, Max) 4.4-Table 1-x) (Total contamination, mg/kg, Max) 4.4-Table 1-xi) (Copper strip corrosion, 3 h at 50 °C, Max) 4.4-Table 1-xii) (Cetane No., Min) 4.4-Table 1-xiv) (Methanol, percent by mass, Max) 4.4-Table 1-xv) (Ester content, percent by mass, Min) 4.4-Table 1-xvi) (Monoglycerides content, percent by mass, Max) 4.4-Table 1-xvi) (Monoglycerides content, percent by mass, Max) 4.4-Table 1-xvii) (Diglyceride content, percent by mass, Max) 4.4-Table 1-xviii) (Triglyceride content, percent by mass, Max) 4.4-Table 1-xix) (Free Glycerol percent by mass, Max) 4.4-Table 1-xix) (Free Glycerol percent by mass, Max) 4.4-Table 1-xx) (Total Glycerol percent by mass, Max) 4.4-Table 1-xxi) (Phosphorous mg/kg, Max) 4.4-Table 1-xxii) (Sodium + Potassium mg/kg, Max) 4.4-Table 1-xxiii) (Calcium + Magnesium mg/kg, Max) 4.4-Table 1-xxiv) (Iodine value, gm iodine/100 gm, Max) 4.4-Table 1-xxv) (Oxidation stability, at 110 °C, Min hrs. Accelerated) 4.4-Table 1-xxvii) (Linolenic acid methyl ester, percent m/m, Max) 4.4-Table 1-xxviii) (Polyunsaturated (>_ 4 double bonds) methyl ester percent m/m, Max) 5.1 (Packing) 5.2 (Marking)

2680

Elutech Laboratory and Calibration Services, Jaipur

9179806

IS 1328 (2025)

Veneered Decorative Plywood - Specification ( Fourth Revision )

Grade- MR, BWR, BWP. Type – 1, 2, 3, 4. Formaldehyde Class- E1 & E2

9100 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 4.1(Grades)	-	0	-
Cl 4.2(Type)	-	0	-
Cl 4.3(Formaldehyde Class)	-	0	-
Cl 5.2(Adhesive)	-	7800	Testing charges as per IS 848
Cl 7.1(Surface Requirements- For Type 1)	-	9100	Complete testing charges for each grade
Cl 7.2(Surface Requirements- For Type 2)	-	9100	Complete testing charges for each grade
Cl 7.3(Surface Requirements- For Type 3)	-	9100	Complete testing charges for each grade
Cl 7.4(Surface Requirements- For Type 4)	-	9100	Complete testing charges for each grade
Cl 8.1(Dimensions (Length and Width))	-	9100	Complete testing charges for each grade
Cl 8.2(Dimensions (Thickness))	-	9100	Complete testing charges for each grade
Cl 8.3(Squareness and Edge Straightness as Per Annex B)	-	9100	Complete testing charges for each grade
Cl 8.4- Table 1(Tolerances)	-	9100	Complete testing charges for each grade
Cl 11.3(Moisture Content)	-	9100	Complete testing charges for each grade
Cl 11.4.1(a)(Water Resistance Test( For MR Grade))	-	9100	Complete testing charges for each grade
Cl 11.4.1(b)(Water Resistance Test( For BWR Grade))	-	9100	Complete testing charges for each grade
Cl 11.4.1(c)(Water Resistance Test( For BWP Grade))	-	9100	Complete testing charges for each grade
Cl 11.5(Formaldehyde Content Test)	-	9100	Complete testing charges for each grade
Cl 11.6(Steady - State Formaldehyde Emission Test ( Optional Test))	-	0	-
Cl 12(Marking)	-	0	-

26 Aug, 2027

-
Included w.e.f 15.10.2025 Exclusion: Cl 11.6 (Steady - State Formaldehyde Emission Test ( Optional Test))

2681

Atckon Laboratories LLP, Bahadurgarh

8186436

IS 4923 (2017)

Hollow steel sections for structural use - Specification (Third Revision)

ALL TYPES

6900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.7.1(Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	6900	-
Cl.7.1(Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	6900	-
Cl.7.1(Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	6900	-
Cl.7.1(Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	6900	-
Cl.7.1(Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	6900	-
Cl.7.1(Aluminium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	6900	-
Cl.7.1(Copper- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	6900	-
Cl.7.1(Niobium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	6900	-
Cl.7.1(Vanadium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	6900	-
Cl.7.1(Titanium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	6900	-
Cl.7.1(Nitrogen- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	6900	-
Cl.7.1(Carbon Equivalent-IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	6900	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Depth))	-	6900	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Width))	-	6900	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections(Thickness))	-	6900	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Weigth))	-	6900	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Area of Section))	-	6900	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Moment of Inertia))	-	6900	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Moment of Inertia about X-X))	-	6900	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Moment of Inertia about Y-Y))	-	6900	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Radius of Gyration))	-	6900	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Radius of Gyration about X-X))	-	6900	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections(Radius of Gyration about Y-Y))	-	6900	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections(Elastic Modulus))	-	6900	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Elastic Modulus about X-X))	-	6900	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Elastic Modulus about Y-Y))	-	6900	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Plastic Modulus))	-	6900	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Plastic Modulus about X-X))	-	6900	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections(Plastic Modulus about Y-Y))	-	6900	-
Cl. 10.1, 14.1, 18.1(Straightness)	-	6900	-
Cl. 10.2, Fig 1(Outside dimension (B))	-	6900	-
Cl. 10.2, Fig 1(Outside dimension (H))	-	6900	-
Cl. 10.2, Fig 1(Outside dimension (T))	-	6900	-
Cl. 10.4, Fig 2(Concavity, X1)	-	6900	-
Cl. 10.4, Fig 2(Convexity, X2)	-	6900	-
Cl. 10.5, Fig 3(Squareness of side)	-	6900	-
Cl. 10.6, Fig 4(External Corner Radius)	-	6900	-
Cl. 10.7, Fig 5(Total twist, V)	-	6900	-
Cl. 15.2, Table 3(Tensile Strength- IS 1608)	-	6900	-
Cl. 15.2, Table 3(Yield Strength- IS 1608)	-	6900	-
Cl. 15.2, Table 3(Elongation- IS 1608)	-	6900	-
Cl. 14.1(Exact Length)	-	6900	-
Cl. 14.1(Random Length)	-	6900	-
Cl. 14.1(Weight on individual length)	-	6900	-
Cl. 14.1(Weight on lots of 10 tonnes min)	-	6900	-
Cl. 18, Note 2(Internal Fin Height (Only for Cold Formed))	-	6900	-
7(Micro Alloying elements(Nb+V+Ti))	-	6900	-
7(Carbon equivalent as CE)	-	6900	-
10.4(Concavity/Convexity-SOP MT-23)	-	6900	-
10.5(Squareness of corner/Sides-SOP MT-23)	-	6900	-
10.6("External corner Radius/ Radii of corners-outside - SOP MT-23")	-	6900	-
11(Oiling & Painting - IS 4923)	-	6900	-
18.1(Height of the internal weld fin - IS 4923)	-	6900	-
10.3(Thickness - IS 4923)	-	6900	-
13(Marking)	-	6900	-
Cl-19(Mechanical Tests)	-	6900	-

-
Included w.e.f. 09.10.2025

2682

Elutech Laboratory and Calibration Services, Jaipur

9179806

IS 12406 (2025)

Medium Density Fibre Boards of Wood and Other Lignocellulosic Materials for General Purpose - Specification ( Third Revision )

Grade-REG, MR, HMR (GP & FN). Formaldehyde Class- E1 &E2

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
As per Clause 7(Finish --IS 2380 (Part 2), IS 2380 (Part 3) & Visual)	-	15000	Complete testing charges for each grade
As per Clause 8, Table 2(Length -IS 2380 (Part 2))	-	15000	Complete testing charges for each grade
As per Clause 8, Table 2(Width - IS 2380 (Part 2))	-	15000	Complete testing charges for each grade
As per Clause 8, Table 2(Thickness - IS 2380 (Part 2))	-	15000	Complete testing charges for each grade
As per Clause 8, Table 2(Squareness, Max. - IS 2380 (Part 2))	-	15000	Complete testing charges for each grade
As per Clause 8, Table 2(Edge straightness, Max.)	-	15000	Complete testing charges for each grade
As per Clause 9.1 Table 3(Density -IS 2380 (Part 3))	-	15000	Complete testing charges for each grade
As per Clause 9.1 Table 3(Variation from mean density, --IS 2380 (Part 3))	-	15000	Complete testing charges for each grade
As per Clause 9.1 Table 3(Moisture Content -IS 2380 (Part 3))	-	15000	Complete testing charges for each grade
As per Clause 9.1 Table 4, Table 5, Table 6, Table 7(Modulus of rupture (MoR), Min.-IS 2380 (Part 4))	-	15000	Complete testing charges for each grade
As per Clause 9.1 Table 4, Table 5, Table 6, Table 7(Modulus of elasticity (MoE), Min. -(IS 2380 (Part 4))	-	15000	Complete testing charges for each grade
As per Clause 9.1 Table 4, Table 5, Table 6, Table7(Internal bond strength, Min. - IS 2380 (Part 5))	-	15000	Complete testing charges for each grade
As per Clause 9.1 Table 4, Table 5, Table 6, Table 7(24 h thickness swelling (due to general absorption) Max. - IS 2380 (Part 17))	-	15000	Complete testing charges for each grade
As per Clause 9.1 Table 4, Table 5, Table 6, Table 7(Screw withdrawal strength (face) , Min. -IS 2380 (Part 4))	-	15000	Complete testing charges for each grade
As per Clause 9.1 Table 4, Table 5, table 6, Table 7(Screw withdrawal strength (edge) , Min. -IS 2380 (Part 4))	-	15000	Complete testing charges for each grade
As per Clause 9.1 , Table 5, Table 6, Table 7(Moisture Resistance : Option 1 : Cyclic test (1. )Internal bond strength Min. -IS 2380 (Part 5) see note 1)	-	15000	Complete testing charges for each grade
As per Clause 9.1 , Table 5, Table 6, Table 7(Moisture Resistance : Option 2 : Boil test (1.) Internal bond strength , Min.- IS 2380 (Part 5) see note 2)	-	15000	Complete testing charges for each grade
As per Clause 9.1 , Table 9(Formaldehyde content Fc, mg/100 g for oven dry board -IS 13745)	-	15000	Complete testing charges for each grade
As per Clause 9.1 , Table 9(Steady-state formaldehyde emission, Fc, mg/m3 (optional test))	-	15000	Complete testing charges for each grade
Cl-5.1(Wood and Any Other Lignocellulosic Material)	-	0	-
Cl-5.2(Adhesive)	-	7800	Testing charges as per IS 848
Cl-5.4(Preservative Treatment)	-	0	-
Cl-6(MANUFACTURE)	-	0	-
Cl-5.3(Sizing Material)	-	0	-

26 Aug, 2027

-
Included w.e.f. 14.10.2025 Exclusion: As per Clause 9.1 , Table 9 (Steady-state formaldehyde emission, Fc, mg/m3 (optional test))

2683

INDIAN TESTING LABORATORY PRIVATE LIMITED, GREATER NOIDA

8171306

IS 1328 (2025)

Veneered Decorative Plywood - Specification ( Fourth Revision )

7500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 4.1(Grades)	-	250	-
Cl 4.2(Type)	-	250	-
Cl 4.3(Formaldehyde Class)	-	250	-
Cl 5.2(Adhesive)	-	500	-
Cl 7.1(Surface Requirements- For Type 1)	-	500	-
Cl 7.2(Surface Requirements- For Type 2)	-	500	-
Cl 7.3(Surface Requirements- For Type 3)	-	500	-
Cl 7.4(Surface Requirements- For Type 4)	-	500	-
Cl 8.1(Dimensions (Length and Width))	-	500	-
Cl 8.2(Dimensions (Thickness))	-	500	-
Cl 8.3(Squareness and Edge Straightness as Per Annex B)	-	500	-
Cl 8.4- Table 1(Tolerances)	-	100	-
Cl 11.3(Moisture Content)	-	650	-
Cl 11.4.1(a)(Water Resistance Test( For MR Grade))	-	1500	-
Cl 11.4.1(b)(Water Resistance Test( For BWR Grade))	-	1500	-
Cl 11.4.1(c)(Water Resistance Test( For BWP Grade))	-	1500	-
Cl 11.5(Formaldehyde Content Test)	-	2000	-
Cl 12(Marking)	-	100	-

15 Aug, 2028

-
Included w.e.f. 15.10.2025 Exclusion: Cl 11.6 (Steady - State Formaldehyde Emission Test ( Optional Test))

2684

BIS, Patna Branch Laboratory (PBL)

None

IS 799 (2023)

AMMONIA LIQUOR SPECIFICATION

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.2Table 1 (i) (Ammonia ( IS 799 : 2023 ))	-
Cl-4.2, Table-1 (xv) (Pyridine and homologues, percent by mass, Max)	-

-
-

2685

Elutech Laboratory and Calibration Services, Jaipur

9179806

IS 3087 (2025)

Medium Density Particle Boards of Wood and other Lignocellulosic Materials for General Purpose - Specification ( Third Revision )

Grade-REG (Grade A & B), MR, HMR. Formaldehyde Class- E1 & E2

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
As per Clause 7(Finish --IS 2380 (Part 2), IS 2380 (Part 3) & Visual)	-	15000	Complete testing charges for each grade
As per Clause 8, Table 2(Length -IS 2380 (Part 2))	-	15000	Complete testing charges for each grade
As per Clause 8, Table 2(Width - IS 2380 (Part 2))	-	15000	Complete testing charges for each grade
As per Clause 8, Table 2(Thickness, Sanded/finished panel - IS 2380 (Part 2))	-	15000	Complete testing charges for each grade
As per Clause 8, Table 2(Squareness, Max. - IS 2380 (Part 2))	-	15000	Complete testing charges for each grade
As per Clause 8, Table 2(Edge straightness, Max. -IS 2380 (Part 2))	-	15000	Complete testing charges for each grade
As per Clause 9.1 Table 3(Density -IS 2380 (Part 3))	-	15000	Complete testing charges for each grade
As per Clause 9.1 Table 3(Variation from mean density, --IS 2380 (Part 3))	-	15000	Complete testing charges for each grade
As per Clause 9.1 Table 3(Moisture Content -IS 2380 (Part 3))	-	15000	Complete testing charges for each grade
As per Clause 9.1 Table 4, Table 5, Table 6, Table 7(Modulus of rupture (MoR), Min.-IS 2380 (Part 4))	-	15000	Complete testing charges for each grade
As per Clause 9.1 Table 4, Table 6, Table 7(Modulus of elasticity (MoE), Min. -(IS 2380 (Part 4))	-	15000	Complete testing charges for each grade
As per Clause 9.1 Table 4, Table 5, Table 6, Table7(Internal bond strength, Min. - IS 2380 (Part 5))	-	15000	Complete testing charges for each grade
As per Clause 9.1 Table 6, Table 7(24 h thickness swelling (due to general absorption) Max. - IS 2380 (Part 17))	-	15000	Complete testing charges for each grade
As per Clause 9.1 Table 4, Table 5, Table 6, Table 7(Screw withdrawal strength (face) , Min. -IS 2380 (Part 4))	-	15000	Complete testing charges for each grade
As per Clause 9.1 Table 4, Table 5, table 6, Table 7(Screw withdrawal strength (edge) , Min. -IS 2380 (Part 4))	-	15000	Complete testing charges for each grade
As per Clause 9.1 , Table 6, Table 7(Moisture Resistance : Option 1 : Cyclic test (1. )Internal bond strength Min. -IS 2380 (Part 5) see note 1)	-	15000	Complete testing charges for each grade
As per Clause 9.1 , Table 6, Table 7(Moisture Resistance : Option 2 : Boil test (1.) Internal bond strength , Min.- IS 2380 (Part 5) see note 2)	-	15000	Complete testing charges for each grade
As per Clause 9.1 , Table 9(Formaldehyde content Fc, mg/100 g for oven dry board -IS 13745)	-	15000	Complete testing charges for each grade
As per Clause 9.1 , Table 9(Steady-state formaldehyde emission, Fc, mg/m3 (optional test))	-	0	-

26 Aug, 2027

-
Included w.e.f. 14.10.2025 Exclusion: As per Clause 9.1 , Table 9 (Steady-state formaldehyde emission, Fc, mg/m3 (optional test))

2686

Samridhi Test House Pvt. Ltd.

8184706

IS 9754 (2025)

HIGH DENSITY POLYETHYLENE CONTAINERS FOR PACKING OF LIQUID PESTICIDES (UP TO 1 LITRE CAPACITY) - SPECIFICATION (first revision)

32000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1.1(Melt Flow Rate (MFR))	-	1100	-
4.1.1(Density)	-	1100	-
4.1.2(Material Identification of Plug)	-	1000	-
4.1.2(Material Identification of Caps/Closure)	-	3000	-
4.2(Ullage & Nominal Capacity)	-	100	-
4.2.2(Mass of Container)	-	500	-
4.3(Wall thickness at any point of Container)	-	500	-
4.4(Construction of Container)	-	500	-
4.4.1(Container Height to Neck Face)	-	500	-
4.4.2(Container Overall Height)	-	500	-
4.4.3(Container Diameter)	-	500	-
4.4.4(Neck Height)	-	500	-
4.4.5(Neck Diameter)	-	600	-
4.4.5(Neck Thread diameter)	-	500	-
4.4.6(Neck Bore)	-	500	-
4.4.7(Neck Ovality)	-	500	-
4.5(Construction of Closure and Sealing)	-	500	-
4.6(Workmanship and Finish)	-	500	-
5.1.1(Leakage Test Vertically Downwards)	-	2000	-
5.1.1(Leakage Test Vertically Upwards)	-	2700	-
5.2(Stress Crack Resistance Test for 360 hours)	-	11000	-
5.3(Drop Test @ Ambient Temperature)	-	1900	-
5.3(Drop Test @ 0 Deg.C)	-	1900	-
5.4(Ink Adhesion test)	-	1500	-
7(Marking & BIS Cert. Marking)	-	500	-
4.1.1(Melt Flow Rate (MFR))	-	0	-
4.1.1(Density)	-	0	-
4.1.2(Material Identification of Plug)	-	0	-
4.1.2(Material Identification of Caps/Closure)	-	0	-
4.2(Ullage & Nominal Capacity)	-	0	-
4.2.2(Mass of Container)	-	0	-
4.3(Wall thickness at any point of Container)	-	0	-
4.4(Construction of Container)	-	0	-
4.4.1(Container Height to Neck Face)	-	0	-
4.4.2(Container Overall Height)	-	0	-
4.4.3(Container Diameter)	-	0	-
4.4.4(Neck Height)	-	0	-
4.4.5(Neck Diameter)	-	0	-
4.4.5(Neck Thread diameter)	-	0	-
4.4.6(Neck Bore)	-	0	-
4.4.7(Neck Ovality)	-	0	-
4.5(Construction of Closure and Sealing)	-	0	-
4.6(Workmanship and Finish)	-	0	-
5.1.1(Leakage Test Vertically Downwards)	-	0	-
5.1.1(Leakage Test Vertically Upwards)	-	0	-
5.2(Stress Crack Resistance Test for 360 hours)	-	0	-
5.3(Drop Test @ Ambient Temperature)	-	0	-
5.3(Drop Test @ 0 Deg.C)	-	0	-
5.4(Ink Adhesion test)	-	0	-
7(Marking & BIS Cert. Marking)	-	0	-

-
Included w.e.f. 19.12.2025

2687

Atckon Laboratories LLP, Bahadurgarh

8186436

IS 15911 (2010)

Structural steel (Ordinary Quality) - Specification

All Grades

7400 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Table-1, 5.1, 8.1 & 8.2(Carbon: Relevant parts of IS 228 or any other established instrumental/chemical method)	-	7400	-
Table-1, 5.1, 8.1 & 8.2(Sulphur: Relevant parts of IS 228 or any other established instrumental/chemical method)	-	7400	-
Table-1, 5.1, 8.1 & 8.2(Phosphorous: Relevant parts of IS 228 or any other established instrumental/chemical method)	-	7400	-
Table-1, 5.1, 8.1 & 8.2(Manganese: Relevant parts of IS 228 or any other established instrumental/chemical method)	-	7400	-
Table-1, 5.1, 8.1 & 8.2(Silicon: Relevant parts of IS 228 or any other established instrumental/chemical method)	-	7400	-
Table-1, 5.1, 8.1 & 8.2(Chromium: Relevant parts of IS 228 or any other established instrumental/chemical method)	-	7400	-
Table-1, 5.1, 8.1 & 8.2(Molybdenum: Relevant parts of IS 228 or any other established instrumental/chemical method)	-	7400	-
Table-1, 5.1, 8.1 & 8.2(Vanadium: Relevant parts of IS 228 or any other established instrumental/chemical method)	-	7400	-
Table-1, 5.1, 8.1 & 8.2(Nickel: Relevant parts of IS 228 or any other established instrumental/chemical method)	-	7400	-
Table-1, 5.1, 8.1 & 8.2(Copper: Relevant parts of IS 228 or any other established instrumental/chemical method)	-	7400	-
Table-1, 5.1, 8.1 & 8.2(Aluminium: Relevant parts of IS 228 or any other established instrumental/chemical method)	-	7400	-
Table-1, 5.1, 8.1 & 8.2(Nitrogen: Relevant parts of IS 228 or any other established instrumental/chemical method)	-	7400	-
Table-1, 5.1, 8.1 & 8.2(Niobium: Relevant parts of IS 228 or any other established instrumental/chemical method)	-	7400	-
Table-1, 5.1, 8.1 & 8.2(Titanium: Relevant parts of IS 228 or any other established instrumental/chemical method)	-	7400	-
Table-1, 5.1, 8.1 & 8.2(Boron: Relevant parts of IS 228 or any other established instrumental/chemical method)	-	7400	-
7(Freedom from defects)	-	7400	-
5 and 10.3.1(Tensile strength. IS 1608)	-	7400	-
5 and 10.3.1(Yield Stress. IS 1608)	-	7400	-
5 and 10.3.1(Percentage Elongation. . IS 1608)	-	7400	-
5 and 10.3.1(Internal Bend Diameter)	-	7400	-
11.3( Bend Test. IS 1599)	-	7400	-
Cl 12 of IS 15911 and Table 2.1 of IS 808(Mass. IS 808)	-	7400	-
Cl 12 of IS 15911 and Table 2.1 of IS 808(Sectional Area. IS 808)	-	7400	-
Cl 12 of IS 15911 and Table 2.1 of IS 808(D)	-	7400	-
Cl 12 of IS 15911 and Table 2.1 of IS 808(B)	-	7400	-
Cl 12 of IS 15911 and Table 2.1 of IS 808(t)	-	7400	-
Cl 12 of IS 15911 and Table 2.1 of IS 808(T)	-	7400	-
Cl 12 of IS 15911 and Table 2.1 of IS 808(Flange Slop, Max α , )	-	7400	-
Cl 12 of IS 15911 and Table 2.1 of IS 808(R1)	-	7400	-
Cl 12 of IS 15911 and Table 2.1 of IS 808(R2)	-	7400	-
Cl 12 of IS 15911 and Table 2.1 of IS 808(Ix)	-	7400	-
Cl 12 of IS 15911 and Table 2.1 of IS 808(Iy)	-	7400	-
Cl 12 of IS 15911 and Table 2.1 of IS 808(rx)	-	7400	-
Cl 12 of IS 15911 and Table 2.1 of IS 808(ry)	-	7400	-
Cl 12 of IS 15911 and Table 2.1 of IS 808(Zx)	-	7400	-
Cl 12 of IS 15911 and Table 2.1 of IS 808(Zy)	-	7400	-
Cl 12 of IS 15911 and Table 2.2 of IS 808(Mass. IS 808)	-	7400	-
Cl 12 of IS 15911 and Table 2.1 of IS 808(Sectional Area. IS 808)	-	7400	-
Cl 12 of IS 15911 and Table 2.1 of IS 808(D)	-	7400	-
Cl 12 of IS 15911 and Table 2.1 of IS 808(B)	-	7400	-
Cl 12 of IS 15911 and Table 2.1 of IS 808(t)	-	7400	-
Cl 12 of IS 15911 and Table 2.1 of IS 808(T)	-	7400	-
Cl 12 of IS 15911 and Table 2.1 of IS 808(Flange Slop, Max α , )	-	7400	-
Cl 12 of IS 15911 and Table 2.1 of IS 808(R1)	-	7400	-
Cl 12 of IS 15911 and Table 2.1 of IS 808(R2)	-	7400	-
Cl 12 of IS 15911 and Table 2.1 of IS 808(Ix)	-	7400	-
Cl 12 of IS 15911 and Table 2.1 of IS 808(Iy)	-	7400	-
Cl 12 of IS 15911 and Table 2.1 of IS 808(rx)	-	7400	-
Cl 12 of IS 15911 and Table 2.1 of IS 808(ry)	-	7400	-
Cl 12 of IS 15911 and Table 2.1 of IS 808(Zx)	-	7400	-
Cl 12 of IS 15911 and Table 2.1 of IS 808(Zy)	-	7400	-
Cl 12 of IS 15911 and Table 3.1 of IS 808(Mass. IS 808)	-	7400	-
Cl 12 of IS 15911 and Table 3.1 of IS 808(Sectional Area. IS 808)	-	7400	-
Cl 12 of IS 15911 and Table 3.1 of IS 808(D)	-	7400	-
Cl 12 of IS 15911 and Table 3.1 of IS 808(B)	-	7400	-
Cl 12 of IS 15911 and Table 3.1 of IS 808(t)	-	7400	-
Cl 12 of IS 15911 and Table 3.1 of IS 808(T)	-	7400	-
Cl 12 of IS 15911 and Table 3.1 of IS 808(Flange Slop, Max α , )	-	7400	-
Cl 12 of IS 15911 and Table 3.1 of IS 808(R1)	-	7400	-
Cl 12 of IS 15911 and Table 3.1 of IS 808(R2)	-	7400	-
Cl 12 of IS 15911 and Table 3.1 of IS 808(Ix)	-	7400	-
Cl 12 of IS 15911 and Table 3.1 of IS 808(Iy)	-	7400	-
Cl 12 of IS 15911 and Table 3.1 of IS 808(rx)	-	7400	-
Cl 12 of IS 15911 and Table 3.1 of IS 808(ry)	-	7400	-
Cl 12 of IS 15911 and Table 3.1 of IS 808(Zx)	-	7400	-
Cl 12 of IS 15911 and Table 3.1 of IS 808(Zy)	-	7400	-
Cl 12 of IS 15911 and Table 4.1 of IS 808(Mass. IS 808)	-	7400	-
Cl 12 of IS 15911 and Table 4.1 of IS 808(Sectional Area. IS 808)	-	7400	-
Cl 12 of IS 15911 and Table 4.1 of IS 808(D)	-	7400	-
Cl 12 of IS 15911 and Table 4.1 of IS 808(B)	-	7400	-
Cl 12 of IS 15911 and Table 4.1 of IS 808(t)	-	7400	-
Cl 12 of IS 15911 and Table 4.1 of IS 808(T)	-	7400	-
Cl 12 of IS 15911 and Table 4.1 of IS 808(Flange Slop, Max α , )	-	7400	-
Cl 12 of IS 15911 and Table 4.1 of IS 808(R1)	-	7400	-
Cl 12 of IS 15911 and Table 4.1 of IS 808(R2)	-	7400	-
Cl 12 of IS 15911 and Table 4.1 of IS 808(Cy)	-	7400	-
Cl 12 of IS 15911 and Table 4.1 of IS 808(Ix)	-	7400	-
Cl 12 of IS 15911 and Table 4.1 of IS 808(Iy)	-	7400	-
Cl 12 of IS 15911 and Table 4.1 of IS 808(rx)	-	7400	-
Cl 12 of IS 15911 and Table 4.1 of IS 808(ry)	-	7400	-
Cl 12 of IS 15911 and Table 4.1 of IS 808(Zx)	-	7400	-
Cl 12 of IS 15911 and Table 4.1 of IS 808(Zy)	-	7400	-
Cl 12 of IS 15911 and Table 5.1 of IS 808(Mass. IS 808)	-	7400	-
Cl 12 of IS 15911 and Table 5.1 of IS 808(Sectional Area. IS 808)	-	7400	-
Cl 12 of IS 15911 and Table 5.1 of IS 808(A*B)	-	7400	-
Cl 12 of IS 15911 and Table 5.1 of IS 808(R1)	-	7400	-
Cl 12 of IS 15911 and Table 5.1 of IS 808(R2)	-	7400	-
Cl 12 of IS 15911 and Table 5.1 of IS 808(Cx)	-	7400	-
Cl 12 of IS 15911 and Table 5.1 of IS 808(Cy)	-	7400	-
Cl 12 of IS 15911 and Table 5.1 of IS 808(Ix)	-	7400	-
Cl 12 of IS 15911 and Table 5.1 of IS 808(Iy)	-	7400	-
Cl 12 of IS 15911 and Table 5.1 of IS 808(Ia( Max ))	-	7400	-
Cl 12 of IS 15911 and Table 5.1 of IS 808(Iv( Max ))	-	7400	-
Cl 12 of IS 15911 and Table 5.1 of IS 808(rx)	-	7400	-
Cl 12 of IS 15911 and Table 5.1 of IS 808(ry)	-	7400	-
Cl 12 of IS 15911 and Table 5.1 of IS 808(ru( Max ))	-	7400	-
Cl 12 of IS 15911 and Table 5.1 of IS 808(rv( Min ))	-	7400	-
Cl 12 of IS 15911 and Table 5.1 of IS 808(Zx)	-	7400	-
Cl 12 of IS 15911 and Table 5.1 of IS 808(Zy )	-	7400	-
Cl 12 of IS 15911 and Table 6.1 of IS 808(Mass. IS 808)	-	7400	-
Cl 12 of IS 15911 and Table 6.1 of IS 808(Sectional Area. IS 808)	-	7400	-
Cl 12 of IS 15911 and Table 6.1 of IS 808(A*B)	-	7400	-
Cl 12 of IS 15911 and Table 6.1 of IS 808(R1)	-	7400	-
Cl 12 of IS 15911 and Table 6.1 of IS 808(R2)	-	7400	-
Cl 12 of IS 15911 and Table 6.1 of IS 808(Cx)	-	7400	-
Cl 12 of IS 15911 and Table 6.1 of IS 808(Cy)	-	7400	-
Cl 12 of IS 15911 and Table 6.1 of IS 808(Tanα)	-	7400	-
Cl 12 of IS 15911 and Table 6.1 of IS 808(Ix)	-	7400	-
Cl 12 of IS 15911 and Table 6.1 of IS 808(Iy)	-	7400	-
Cl 12 of IS 15911 and Table 6.1 of IS 808(Ia( Max ))	-	7400	-
Cl 12 of IS 15911 and Table 6.1 of IS 808(Iv( Max ))	-	7400	-
Cl 12 of IS 15911 and Table 6.1 of IS 808(rx)	-	7400	-
Cl 12 of IS 15911 and Table 6.1 of IS 808(ry)	-	7400	-
Cl 12 of IS 15911 and Table 6.1 of IS 808(ru( Max ))	-	7400	-
Cl 12 of IS 15911 and Table 6.1 of IS 808(rv( Min ))	-	7400	-
Cl 12 of IS 15911 and Table 6.1 of IS 808(Zx)	-	7400	-
Cl 12 of IS 15911 and Table 6.1 of IS 808(Zy )	-	7400	-
Cl 12 of IS 15911 and Table 6.2 of IS 808(Mass. IS 808)	-	7400	-
Cl 12 of IS 15911 and Table 6.2 of IS 808(Sectional Area. IS 808)	-	7400	-
Cl 12 of IS 15911 and Table 6.2 of IS 808(A*B)	-	7400	-
Cl 12 of IS 15911 and Table 6.2 of IS 808(R1)	-	7400	-
Cl 12 of IS 15911 and Table 6.2 of IS 808(R2)	-	7400	-
Cl 12 of IS 15911 and Table 6.2 of IS 808(Cx)	-	7400	-
Cl 12 of IS 15911 and Table 6.2 of IS 808(Cy)	-	7400	-
Cl 12 of IS 15911 and Table 6.2 of IS 808(Tanα)	-	7400	-
Cl 12 of IS 15911 and Table 6.2 of IS 808(Ix)	-	7400	-
Cl 12 of IS 15911 and Table 6.2 of IS 808(Iy)	-	7400	-
Cl 12 of IS 15911 and Table 6.2 of IS 808(Ia( Max ))	-	7400	-
Cl 12 of IS 15911 and Table 6.2 of IS 808(Iv( Max ))	-	7400	-
Cl 12 of IS 15911 and Table 6.2 of IS 808(rx)	-	7400	-
Cl 12 of IS 15911 and Table 6.2 of IS 808(ry)	-	7400	-
Cl 12 of IS 15911 and Table 6.2 of IS 808(ru( Max ))	-	7400	-
Cl 12 of IS 15911 and Table 6.2 of IS 808(rv( Min ))	-	7400	-
Cl 12 of IS 15911 and Table 6.2 of IS 808(Zx)	-	7400	-
Cl 12 of IS 15911 and Table 6.2 of IS 808(Zy )	-	7400	-
Cl 12 of IS 15911 and Table 1 of IS 1173(Clauses 3.1 , 5.1 and Table 1 of IS 1173)	-	7400	-
Cl 12 of IS 15911 and Table 1 of IS 1252(Clauses 4.1 , 6.1 and Table 1 of IS 1252)	-	7400	-
Cl 12 of IS 15911 and Table 2 of IS 1730(Clauses 4.1 , 4.2 and Table 1 of IS 1730)	-	7400	-
Cl 12 of IS 15911 and Table 2 of IS 1730(Clauses 4.2 and Table 1 of IS 1730)	-	7400	-
Cl 12 of IS 15911 and Table 3 of IS 1730(Clauses 4.3 and Table 1 of IS 1730)	-	7400	-
Cl 12 of IS 15911 and Table 4 of IS 1730(Clauses 5.1 and Table 1 of IS 1730)	-	7400	-
Cl 12 of IS 15911 and Table 5 of IS 1730(Clauses 5.2 and Table 1 of IS 1730)	-	7400	-
Cl 12 of IS 15911 and Table 6 of IS 1730(Clauses 6.1 and Table 1 of IS 1730)	-	7400	-
Cl 12 of IS 15911 and Table 7 of IS 1730(Clauses 6.2 and Table 1 of IS 1730)	-	7400	-
Cl 12 of IS 15911 and Table 8 of IS 1730(Clauses 7.1, 7.2 and Table 1 of IS 1730)	-	7400	-
Cl 12 of IS 15911 and Table 9 of IS 1730(Clauses 7.2 and Table 1 of IS 1730)	-	7400	-
Cl 12 of IS 15911 and Table 1 of IS 1732(Clauses 3.1, 4.1,4.1.1 and Table 1 of IS 1732)	-	7400	-
Cl 12 of IS 15911 and Table 2 of IS 1732(Clauses 3.1, 4.1,4.1.1 and Table 1 of IS 1732)	-	7400	-
Cl 12 of IS 15911 and Table 1 of IS 1863(Clauses 4.1, 5.5 and Table 1 of IS 1863)	-	7400	-
Cl 12 of IS 15911 and Table 2 of IS 1863(Clauses 5.1 and Table 2 of IS 1863)	-	7400	-
Cl 12 of IS 15911 and Table 3 of IS 1863(Clauses 5.2 and Table 2 of IS 1863)	-	7400	-
Cl 12 of IS 15911 and Table 1 of IS 3954(Clauses 4, 6.1 and Table 2 of IS 3954)	-	7400	-
13(Tolerances)	-	7400	-
17(Marking)	-	7400	-

-
Included w.e.f. 09.10.2025

2688

Elutech Laboratory and Calibration Services, Jaipur

9179806

IS 848 (2025)

Synthetic Resin Adhesives for Plywood (Phenolic, Aminoplastic and Bio-Materials Based) - Specification ( Third Revision )

Garde- MR,BWR,BWP. Liquid, Powder, Film

7800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
As per Clause 4 Table 1(TYPES)	-	7800	Complete testing charge for each grade
As per Clause 6.6(SETTING TIMES AND CONDITIONS)	-	7800	Complete testing charge for each grade
As per Clause 7.3.2 Table 1(i)(Cyclic Test For BWP Type)	-	7800	Complete testing charge for each grade
As per Clause 7.3.2 Table 1(ii)(Cyclic Test For BWR Type)	-	7800	Complete testing charge for each grade
As per Clause 7.3.2 Table 1(iii)(Cyclic Test For MR Type)	-	7800	Complete testing charge for each grade
As per Clause 7.4(Acidity And Alkalinity (pH))	-	7800	Complete testing charge for each grade
As per Clause 9(Marking)	-	0	-

26 Aug, 2027

-
Included w.e.f 04.11.2025

2689

Ratlam Smart Laboratory (IOCL)

8192614

IS 15607 (2022)

Biodiesel B-100 - Fatty Acid Methyl Esters FAME Specification Second Revision

19870 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.4-Table 1-xiii)(Acid value, mg KOH/g, Max)	-	2270	-
4.4-Table 1-i)(Appearance, visual)	-	200	-
4.4-Table 1-xxvi)(Cold filter plugging point (CFPP), °C Max a) summer 18 – Part 110 b) winter3))	-	1900	-
4.4-Table 1-ii)(Colour, visual)	-	200	-
4.4-Table 1-xi)(Copper strip corrosion, 3 h at 50 °C, Max)	-	1130	-
4.4-Table 1-v)(Flash point (PMCC)1) °C, Min)	-	1900	-
4.4-Table 1-iv)(Kinematic viscosity at 40 °C, cSt)	-	2270	-
4.4-Table 1-vi)(Total Sulphur, mg/kg, Max)	-	4710	-
4.4-Table 1-ix)(Water content mg/kg, Max)	-	4160	-
4.4-Table 1-iii)(Density at 15 °C, kg/m3)	-	1130	-

05 Dec, 2028

-
Excluding: 4.1 (General) 4.2 (Additives) 4.3 (The materials shall be free from grit) 4.4-Table 1-vii) (Carbon residue (MCR) 2) percent by mass, Max) 4.4-Table 1-viii) (Sulfated ash, percent by mass, Max) 4.4-Table 1-x) (Total contamination, mg/kg, Max) 4.4-Table 1-xii) (Cetane No., Min) 4.4-Table 1-xiv) (Methanol, percent by mass, Max) 4.4-Table 1-xv) (Ester content, percent by mass, Min) 4.4-Table 1-xvi) (Monoglycerides content, percent by mass, Max) 4.4-Table 1-xvii) (Diglyceride content, percent by mass, Max)4.4-Table 1-xviii) (Triglyceride content, percent by mass, Max)4.4-Table 1-xix) (Free Glycerol percent by mass, Max) 4.4-Table 1-xx) (Total Glycerol percent by mass, Max)4.4-Table 1-xxi) (Phosphorous mg/kg, Max) 4.4-Table 1-xxii) (Sodium + Potassium mg/kg, Max)4.4-Table 1-xxiii) (Calcium + Magnesium mg/kg, Max)4.4-Table 1-xxiv) (Iodine value, gm iodine/100 gm, Max)4.4-Table 1-xxv) (Oxidation stability, at 110 °C, Min hrs. Accelerated)4.4-Table 1-xxvii) (Linolenic acid methyl ester, percent m/m, Max)4.4-Table 1-xxviii) (Polyunsaturated (>_ 4 double bonds) methyl ester percent m/m, Max)5.1 (Packing)5.2 (Marking)

2690

Atckon Laboratories LLP, Bahadurgarh

8186436

IS 1341 (2018)

Steel Butt Hinges - Specification (Sixth Revision)

ALL TYPES

6400 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3 Tables 2 to 9(Types)	-	6400	-
5.1 Tables 2 to 9 (2)(Size of Hinge)	-	6400	-
5.1 Tables 2 to 9 (3)(Length A)	-	6400	-
5.1 Tables 2 to 9 (4)(Breadth B)	-	6400	-
5.1 Tables 2 to 9 (4)(Breadth B1)	-	6400	-
5.1 Tables 2 to 9 (4)(Breadth B2)	-	6400	-
5.1 Tables 2 to 9 (5)(Thickness of Flap C)	-	6400	-
5.1 Tables 2 to 9 (6)(Diameter of Hinge Pin D)	-	6400	-
5.1 Tables 2 to 9 (7)(Number of Knuckles)	-	6400	-
5.1 Tables 2 to 9 (8)(Number of Screw Holes)	-	6400	-
5.1 Tables 2 to 9 (9)(Holes for Screw No.)	-	6400	-
6.1(General)	-	6400	-
6.1(General)	-	6400	-
6.1(General)	-	6400	-
6.2.1(Knuckles)	-	6400	-
6.3(Pins)	-	6400	-
6.4(Screw Holes)	-	6400	-
6.4.2(Position of Holes)	-	6400	-
6.4.2(X)	-	6400	-
6.4.2(Y)	-	6400	-
6.4.2(Z)	-	6400	-
6.4.2.1(Position of Holes)	-	6400	-
7(Finish)	-	6400	-
TABLE-1 (Clause-4)(TITANIUM)	-	6400	-
TABLE-1 (Clause-4)(VANADIUM)	-	6400	-
TABLE-1 (Clause-4)(NIOBIUM)	-	6400	-
TABLE-1 (Clause-4)(Molybdenum)	-	6400	-
TABLE-1 (Clause-4)(Chromium)	-	6400	-
TABLE-1 (Clause-4)(Nickel)	-	6400	-
TABLE-1 (Clause-4)( ALUMINIUM)	-	6400	-
TABLE-1 (Clause-4)(SILICON)	-	6400	-
TABLE-1 (Clause-4)(NITROGEN)	-	6400	-
TABLE-1 (Clause-4)(MANGANESE)	-	6400	-
TABLE-1 (Clause-4)(PHOSPHURS)	-	6400	-
TABLE-1 (Clause-4)(SULPHUR)	-	6400	-
TABLE-1 (Clause-4)( CARBON)	-	6400	-
Clause 4 Table 1(Manganese ( Pin))	-	6400	-
Clause 4 Table 1(Phosphorus ( Pin))	-	6400	-
Clause 4 Table 1(Sulphur ( Pin))	-	6400	-
Clause 4 Table 1(Carbon ( Pin))	-	6400	-
Clause 4 Table 1(Nitrogen ( Flap))	-	6400	-
Clause 4 Table 1(Manganese ( Flap))	-	6400	-
Clause 4 Table 1(Phosphorus ( Flap))	-	6400	-
Clause 4 Table 1(Sulphur ( Flap))	-	6400	-
Clause 4 Table 1(Carbon ( Flap))	-	6400	-
8(Marking)	-	6400	-
Cl 4 & Table 1(Sulphur- IS 228(Part 9))	-	6400	-
Cl 4 & Table 1(Carbon- IS 228(Part 1))	-	6400	-
Cl 4 & Table 1(Phosphorous- IS 228(Part 3))	-	6400	-
Cl 4 & Table 1(Manganese- IS 228(Part 2))	-	6400	-
Cl 4 & Table 1(Silicon- IS 228(Part 2))	-	6400	-
Cl 4 & Table 1(Nitrogen -IS 228(Part 19))	-	6400	-

-
Included w.e.f. 09.10.2025

2691

Eastern Regional Laboratory (IOCL), Howrah Terminal

5192414

IS 1587 (2017)

Aviation turbine fuel, high flash point type - Specification (Fourth Revision)

33600 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.2-Table 1-iii)(Volatility a) Distillation 1. Initial boiling point, °C)	-	5680	-
3.2-Table 1-iv)(Fluidity a) Freezing point, °C)	-	4540	-
3.2-Table 1-v)(Combustion a) Specific energy, MJ/kg,Min)	-	6260	-
3.2-Table 1-vi)(Corrosion a) Copper strip corrosion for 2 hrs at 100 °C)	-	2770	-
3.2-Table 1-ii)(Composition a) Total acidity, mg KOH /g, Max)	-	4580	-
3.2-Table 1-i)(Appearance a) Visual appearance)	-	1330	-
3.2-Table 1-viii)(Contaminants a) Existent Gum, mg/100 ml, Max)	-	2070	-

04 Dec, 2028

-
3.2-Table 1-vii) (Thermal Stability JFTOT at control temperature of 260 °C a) Filter pressure differential, mm Hg, Max) 1 (Lubricity Wear scar diameter, mm,Max) 1 (Packing) 1 (Marking)

2692

CIPET, Madurai

6139834

IS 16098 Part 1 (2013)

Structured-Wall Plastics Piping Systems for Non-Pressure Drainage and Sewerage Part 1 Pipes and Fittings With Smooth External Surface, Type A

110 -400 mm

52639 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.3.1(Dimension of Pipes and Fittings Diameter of pipe)	-	500	25% Discount on Testing Charges for BIS
6.3.2(Dimension of Pipes and Fittings Lengths of Pipe)	-	500	25% Discount on Testing Charges for BIS
6.3.3(Dimension of Pipes and Fittings Diameters of Pipes and Spigots of Pipes orFittings)	-	500	25% Discount on Testing Charges for BIS
7.0(Physical characteristics for pipes and fittings Appearance)	-	1100	25% Discount on Testing Charges for BIS
7.1.1(Physical characteristics for pipes and fittings Colour of Finished Pipes)	-	1100	25% Discount on Testing Charges for BIS
7.2(Physical characteristics for pipes and fittings )	-	1100	25% Discount on Testing Charges for BIS
7.3(Physical characteristics for pipes and fittings )	-	1100	25% Discount on Testing Charges for BIS
8.1.1(Mechanical Characteristics of Pipes General)	-	1100	25% Discount on Testing Charges for BIS
8.1.1(Mechanical Characteristics of Pipes General)	-	1100	25% Discount on Testing Charges for BIS
8.1.2 (a)(Mechanical Characteristics of Pipes Ring Flexibility)	-	1100	25% Discount on Testing Charges for BIS
8.1.2 (b)(Mechanical Characteristics of Pipes Ring Flexibility)	-	1100	25% Discount on Testing Charges for BIS
8.1.2 (c)(Mechanical Characteristics of Pipes Ring Flexibility)	-	1100	25% Discount on Testing Charges for BIS
8.1.2 (d)(Mechanical Characteristics of Pipes Ring Flexibility)	-	1100	25% Discount on Testing Charges for BIS
8.1.2 (e)(Mechanical Characteristics of Pipes Ring Flexibility)	-	1100	25% Discount on Testing Charges for BIS
8.2.1(Mechanical Characteristics of Fittings General)	-	1100	25% Discount on Testing Charges for BIS
8.2.1(Mechanical Characteristics of Fittings General)	-	1100	25% Discount on Testing Charges for BIS
8.2.2(Mechanical Characteristics of Fittings)	-	1100	25% Discount on Testing Charges for BIS
8.3(Joints)	-	1100	25% Discount on Testing Charges for BIS
9 (Table 12)(Performance Requirements)	-	1100	25% Discount on Testing Charges for BIS
9 (Table 12)(Performance Requirements)	-	1100	25% Discount on Testing Charges for BIS
9 (Table 12)(Performance Requirements)	-	1100	25% Discount on Testing Charges for BIS
11.1(Marking General)	-	300	25% Discount on Testing Charges for BIS
11.2.1(Minimum Required Marking Pipes)	-	300	25% Discount on Testing Charges for BIS
11.2.1(Minimum Required Marking Pipes)	-	300	25% Discount on Testing Charges for BIS
11.2.1(Minimum Required Marking Pipes)	-	300	25% Discount on Testing Charges for BIS
11.2.1(Minimum Required Marking Pipes)	-	300	25% Discount on Testing Charges for BIS
11.2.1(Minimum Required Marking Pipes)	-	300	25% Discount on Testing Charges for BIS
11.2.2(Minimum Required Marking Fittings)	-	300	25% Discount on Testing Charges for BIS
11.2.2(Minimum Required Marking Fittings)	-	300	25% Discount on Testing Charges for BIS
11.2.2(Minimum Required Marking Fittings)	-	300	25% Discount on Testing Charges for BIS
11.2.2(Minimum Required Marking Fittings)	-	300	25% Discount on Testing Charges for BIS
11.2.2(Minimum Required Marking Fittings)	-	300	25% Discount on Testing Charges for BIS
11.2.2(Minimum Required Marking Fittings)	-	300	25% Discount on Testing Charges for BIS
5.0(Composition of the material)	-	1050	25% Discount on Testing Charges for BIS
5.1(Composition of the material)	-	1050	25% Discount on Testing Charges for BIS
5.2 Table 1(Composition of the material- Resistance to internal hydrostatic Pipe material (1) 1 000 IS 12235 No seepage, cracking, pressure at 60ºC)	-	1050	25% Discount on Testing Charges for BIS
5.3(Composition of the material)	-	1050	25% Discount on Testing Charges for BIS
5.4(Composition of the material)	-	1050	25% Discount on Testing Charges for BIS
6.0(DESIGNATION OF WALL CONSTRUCTIONS AND EXAMPLES OF TYPICAL JOINTING METHODS )	-	500	25% Discount on Testing Charges for BIS
6.1(Wall Construction Designated as Type A)	-	500	25% Discount on Testing Charges for BIS
6.2(Deswignation)	-	500	25% Discount on Testing Charges for BIS
6.3(Dimensions of pipes and fittings)	-	500	25% Discount on Testing Charges for BIS
6.3.1 Table 2(Mean outside diameter)	-	500	25% Discount on Testing Charges for BIS
6.3.2 Table 3(Wall thickness)	-	500	25% Discount on Testing Charges for BIS
6.3.3 Fig 2(Length of pipe)	-	500	25% Discount on Testing Charges for BIS
6.3.4,Table 4,5(Dimensions of Integral sckets and spigot ends)	-	500	25% Discount on Testing Charges for BIS
6.3.4.1(Wall thickness of sockets)	-	500	25% Discount on Testing Charges for BIS
6.3.4.2(Fabricated fittings)	-	500	25% Discount on Testing Charges for BIS
6.3.4.3(Rotational moulded fittings)	-	500	25% Discount on Testing Charges for BIS
6.3.4.4(Type of fittings)	-	500	25% Discount on Testing Charges for BIS
7.0(Physical characteristics of pipes)	-	500	25% Discount on Testing Charges for BIS
7.1(Appearance)	-	500	25% Discount on Testing Charges for BIS
7.2(Colour )	-	500	25% Discount on Testing Charges for BIS
7.3(Vicat softening temperature of pipes)	-	1100	25% Discount on Testing Charges for BIS
7.4(Resistance to Dichloromethane)	-	1100	25% Discount on Testing Charges for BIS
7.5(longitudinal reversion)	-	1100	25% Discount on Testing Charges for BIS
8.0(Physical characteristics of fittings)	-	1100	25% Discount on Testing Charges for BIS
8.1(Appearance and colour)	-	1100	25% Discount on Testing Charges for BIS
8.2(Vicat softening temperature of fittings)	-	1100	25% Discount on Testing Charges for BIS
8.3(Effect of Heating (Stress Relief Test))	-	1100	25% Discount on Testing Charges for BIS
9.0(Mechanical characteristics ofpipes)	-	1100	25% Discount on Testing Charges for BIS
9.1(Ring stiffness)	-	1100	25% Discount on Testing Charges for BIS
9.2(Resistance to external blows at o C)	-	1100	25% Discount on Testing Charges for BIS
9.3(Ring flexibility)	-	1100	25% Discount on Testing Charges for BIS
9.4(Creep ratio)	-	1100	25% Discount on Testing Charges for BIS
10.0(Mechanical Characteristics of fittings)	-	1100	25% Discount on Testing Charges for BIS
10.1(Impact Strength of Injection Moulded and Fabricated Fittings)	-	1100	25% Discount on Testing Charges for BIS
11.0(Joints)	-	850	25% Discount on Testing Charges for BIS
11.1(Elastomeric Sealing Rings)	-	850	25% Discount on Testing Charges for BIS
11.2(Solvent cement)	-	1100	25% Discount on Testing Charges for BIS
12.0(PERFORMANCE REQUIREMENTS)	-	1100	25% Discount on Testing Charges for BIS
12.1(Elastomeric Sealing Ring Joints)	-	850	25% Discount on Testing Charges for BIS
12.1.1(Tightness of Elastomeric Sealing Ring Joints (Water pressure))	-	850	25% Discount on Testing Charges for BIS
12.1.2(Tightness of Elastomeric Sealing Ring Joints (Internal Vaccum ))	-	5000	25% Discount on Testing Charges for BIS
12.1.3(Resistance to Combined Temperature Cycling and External Loading)	-	1100	25% Discount on Testing Charges for BIS
12.2(Solvent cement joints)	-	1100	25% Discount on Testing Charges for BIS
12.2.1(Tightness of Solvent cemented Ring Joints )	-	1100	25% Discount on Testing Charges for BIS
12.2.2(Tightness of Solvent cemented Ring Joints (Vaccum pressure))	-	1100	25% Discount on Testing Charges for BIS
6.3.1(Dimension of Pipes and Fittings Diameter of pipe)	-	500	25% Discount on Testing Charges for BIS
6.3.2(Dimension of Pipes and Fittings Lengths of Pipe)	-	500	25% Discount on Testing Charges for BIS
6.3.3(Dimension of Pipes and Fittings Diameters of Pipes and Spigots of Pipes orFittings)	-	500	25% Discount on Testing Charges for BIS
7.0(Physical characteristics for pipes and fittings Appearance)	-	500	25% Discount on Testing Charges for BIS
7.1.1(Physical characteristics for pipes and fittings Colour of Finished Pipes)	-	500	25% Discount on Testing Charges for BIS
7.2(Physical characteristics for pipes and fittings )	-	500	25% Discount on Testing Charges for BIS
7.3(Physical characteristics for pipes and fittings )	-	500	25% Discount on Testing Charges for BIS
8.1.1(Mechanical Characteristics of Pipes General)	-	1100	25% Discount on Testing Charges for BIS
8.1.1(Mechanical Characteristics of Pipes General)	-	1100	25% Discount on Testing Charges for BIS
8.1.2 (a)(Mechanical Characteristics of Pipes Ring Flexibility)	-	1100	25% Discount on Testing Charges for BIS
8.1.2 (b)(Mechanical Characteristics of Pipes Ring Flexibility)	-	1100	25% Discount on Testing Charges for BIS
8.1.2 (c)(Mechanical Characteristics of Pipes Ring Flexibility)	-	1100	25% Discount on Testing Charges for BIS
8.1.2 (d)(Mechanical Characteristics of Pipes Ring Flexibility)	-	1100	25% Discount on Testing Charges for BIS
8.1.2 (e)(Mechanical Characteristics of Pipes Ring Flexibility)	-	1100	25% Discount on Testing Charges for BIS
8.2.1(Mechanical Characteristics of Fittings General)	-	1100	25% Discount on Testing Charges for BIS
8.2.1(Mechanical Characteristics of Fittings General)	-	1100	25% Discount on Testing Charges for BIS
8.2.2(Mechanical Characteristics of Fittings)	-	1100	25% Discount on Testing Charges for BIS
8.3(Joints)	-	850	25% Discount on Testing Charges for BIS
9 (Table 12)(Performance Requirements)	-	1100	25% Discount on Testing Charges for BIS
9 (Table 12)(Performance Requirements)	-	1100	25% Discount on Testing Charges for BIS
9 (Table 12)(Performance Requirements)	-	1100	25% Discount on Testing Charges for BIS
11.1(Marking General)	-	300	25% Discount on Testing Charges for BIS
11.2.1(Minimum Required Marking Pipes)	-	300	25% Discount on Testing Charges for BIS
11.2.1(Minimum Required Marking Pipes)	-	300	25% Discount on Testing Charges for BIS
11.2.1(Minimum Required Marking Pipes)	-	300	25% Discount on Testing Charges for BIS
11.2.1(Minimum Required Marking Pipes)	-	300	25% Discount on Testing Charges for BIS
11.2.1(Minimum Required Marking Pipes)	-	300	25% Discount on Testing Charges for BIS
11.2.2(Minimum Required Marking Fittings)	-	300	25% Discount on Testing Charges for BIS
11.2.2(Minimum Required Marking Fittings)	-	300	25% Discount on Testing Charges for BIS
11.2.2(Minimum Required Marking Fittings)	-	300	25% Discount on Testing Charges for BIS
11.2.2(Minimum Required Marking Fittings)	-	300	25% Discount on Testing Charges for BIS
11.2.2(Minimum Required Marking Fittings)	-	300	25% Discount on Testing Charges for BIS
11.2.2(Minimum Required Marking Fittings)	-	300	25% Discount on Testing Charges for BIS
6.3.4 Table 4 & 5(Dimensions of Integral Socket and spigot ends)	-	500	25% Discount on Testing Charges for BIS
6.3.4 Table 4 & 5(Outside diameter (dsm) min)	-	500	25% Discount on Testing Charges for BIS
6.3.4 Table 4 & 5(C max)	-	500	25% Discount on Testing Charges for BIS
7.1.1(Colour of finished pipes)	-	300	25% Discount on Testing Charges for BIS
12.1.1(Tightness of Elastomeric Sealing Ring Joints (Water Pressure))	-	850	25% Discount on Testing Charges for BIS
12.1.2(Tightness of Elastomeric Sealing Ring Joints (Internal Vacuum))	-	5000	25% Discount on Testing Charges for BIS
12.1.3(Resistance to Combined Temperature Cycling and External Loading)	-	1100	25% Discount on Testing Charges for BIS
12.1.3(Resistance to Combined Temperature Cycling and External Loading)	-	1100	25% Discount on Testing Charges for BIS
12.1.3(Resistance to Combined Temperature Cycling and External Loading)	-	1100	25% Discount on Testing Charges for BIS
12.1.3(Resistance to Combined Temperature Cycling and External Loading)	-	1100	25% Discount on Testing Charges for BIS
12.1.3(Resistance to Combined Temperature Cycling and External Loading)	-	1100	25% Discount on Testing Charges for BIS
7.6(7.6 Effect on Water)	-	3000	25% Discount on Testing Charges for BIS
8.4(Effect on Water)	-	3000	25% Discount on Testing Charges for BIS

22 May, 2027

-
Included w.e.f. 14.10.2025

2693

Atckon Laboratories LLP, Bahadurgarh

8186436

IS 2062 (2011)

Hot rolled medium and high tensile structural steel - Specification (Seventh Revision)

ALL GRADES

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 18(Weight)	-	15000	-
Cl 15(Length, Width & Thickness)	-	15000	-
Cl 13(Y Groove Cracking Test)	-	15000	-
Cl 12(Sudden Load Applied)	-	15000	-
Cl 11.3(Press)	-	15000	-
Cl 10.3(UTM)	-	15000	-
Cl 7(Workmanship)	-	15000	-
Cl 18(Weight)	-	15000	-
Cl 15(Length, Width & Thickness)	-	15000	-
Cl 13(Y Groove Cracking Test)	-	15000	-
Cl 12(Sudden Load Applied)	-	15000	-
Cl 11.3(Press)	-	15000	-
Cl 10.3(UTM)	-	15000	-
Cl 7(Workmanship)	-	15000	-
Cl 18(Weight)	-	15000	-
Cl 15(Length, Width & Thickness)	-	15000	-
Cl 13(Y Groove Cracking Test)	-	15000	-
Cl 12(Sudden Load Applied)	-	15000	-
Cl 11.3(Press)	-	15000	-
Cl 10.3(UTM)	-	15000	-
Cl 7(Workmanship)	-	15000	-
Clause - 5, 8.1 & 8.2(E650, CARBON +EQUIVELENT )	-	15000	-
Cl. 15 (Cl. 15 Channel Section: Sweep)	-	15000	-
Cl. 15(Cl. 15 Channel Section: Camber)	-	15000	-
Cl. 15(Cl. 15 Channel Section: Flatness of Web (Concavity))	-	15000	-
Cl. 15(Cl. 15 Channel Section: Flatness of Web (Convexity))	-	15000	-
Cl. 15(Cl. 15 Channel Section: Flange Out of Square)	-	15000	-
Cl. 15(Cl. 15 Channel Section: Width of Flange)	-	15000	-
Cl. 15(Cl. 15 Channel Section: Depth)	-	15000	-
Cl. 15(Cl. 15 Square Bar: Out of Square)	-	15000	-
Cl. 15(Cl. 15 Square Bar: Side Width: Minimum)	-	15000	-
Cl. 15(Cl. 15 Square Bar: Side Width: Maximum)	-	15000	-
Cl. 15(Cl. 15 Round Bar: Out of Shape)	-	15000	-
Cl. 15(Cl. 15 Round Bar: Diameter Minimum)	-	15000	-
Cl. 15(Cl. 15 Round Bar: Diameter Maximum)	-	15000	-
Cl. 10.3 (Cl. 10.3 (Elongation %))	-	15000	-
Cl. 10.3 (Cl. 10.3 (Yield Stress))	-	15000	-
Cl. 10.3 (Cl. 10.3 (Tensile Strength))	-	15000	-
Clause - 5, 8.1 & 8.2(E650, ALUMINIUM)	-	15000	-
Clause - 5, 8.1 & 8.2(E650, SILICON)	-	15000	-
Clause - 5, 8.1 & 8.2(E650, NITROGEN)	-	15000	-
Clause - 5, 8.1 & 8.2(E650 ,MANGANESE)	-	15000	-
Clause - 5, 8.1 & 8.2(E650, PHOSPHURS)	-	15000	-
Clause - 5, 8.1 & 8.2(E650, SULPHUR)	-	15000	-
Clause - 5, 8.1 & 8.2(E650, CARBON)	-	15000	-
Clause - 5, 8.1 & 8.2(E600, CARBON +EQUIVELENT )	-	15000	-
Clause - 5, 8.1 & 8.2(E600, ALUMINIUM)	-	15000	-
Clause - 5, 8.1 & 8.2(E600, SILICON)	-	15000	-
Clause - 5, 8.1 & 8.2(E600, NITROGEN)	-	15000	-
Clause - 5, 8.1 & 8.2(E600 ,MANGANESE)	-	15000	-
Clause - 5, 8.1 & 8.2(E600, PHOSPHURS)	-	15000	-
Clause - 5, 8.1 & 8.2(E600, SULPHUR)	-	15000	-
Clause - 5, 8.1 & 8.2(E600, CARBON)	-	15000	-
Clause - 5, 8.1 & 8.2(E550, CARBON +EQUIVELENT )	-	15000	-
Clause - 5, 8.1 & 8.2(E550, ALUMINIUM)	-	15000	-
Clause - 5, 8.1 & 8.2(E550, SILICON)	-	15000	-
Clause - 5, 8.1 & 8.2(E550, NITROGEN)	-	15000	-
Clause - 5, 8.1 & 8.2(E550 ,MANGANESE)	-	15000	-
Clause - 5, 8.1 & 8.2(E550, PHOSPHURS)	-	15000	-
Clause - 5, 8.1 & 8.2(E550, SULPHUR)	-	15000	-
Clause - 5, 8.1 & 8.2(E550, CARBON)	-	15000	-
Clause - 5, 8.1 & 8.2(E450, CARBON +EQUIVELENT )	-	15000	-
Clause - 5, 8.1 & 8.2(E450, ALUMINIUM)	-	15000	-
Clause - 5, 8.1 & 8.2(E450, SILICON)	-	15000	-
Clause - 5, 8.1 & 8.2(E450, NITROGEN)	-	15000	-
Clause - 5, 8.1 & 8.2(E450 ,MANGANESE)	-	15000	-
Clause - 5, 8.1 & 8.2(E450, PHOSPHURS)	-	15000	-
Clause - 5, 8.1 & 8.2(E450, SULPHUR)	-	15000	-
Clause - 5, 8.1 & 8.2(E450, CARBON)	-	15000	-
Clause - 5, 8.1 & 8.2(E410, CARBON +EQUIVELENT )	-	15000	-
Clause - 5, 8.1 & 8.2(E410, ALUMINIUM)	-	15000	-
Clause - 5, 8.1 & 8.2(E410, SILICON)	-	15000	-
Clause - 5, 8.1 & 8.2(E410, NITROGEN)	-	15000	-
Clause - 5, 8.1 & 8.2(E410 ,MANGANESE)	-	15000	-
Clause - 5, 8.1 & 8.2(E410, PHOSPHURS)	-	15000	-
Clause - 5, 8.1 & 8.2(E410, SULPHUR)	-	15000	-
Clause - 5, 8.1 & 8.2(E410, CARBON)	-	15000	-
Clause - 5, 8.1 & 8.2(E350, CARBON +EQUIVELENT )	-	15000	-
Clause - 5, 8.1 & 8.2(E350, ALUMINIUM)	-	15000	-
Clause - 5, 8.1 & 8.2(E350, SILICON)	-	15000	-
Clause - 5, 8.1 & 8.2(E350, NITROGEN)	-	15000	-
Clause - 5, 8.1 & 8.2(E350 ,MANGANESE)	-	15000	-
Clause - 5, 8.1 & 8.2(E350, PHOSPHURS)	-	15000	-
Clause - 5, 8.1 & 8.2(E350, SULPHUR)	-	15000	-
Clause - 5, 8.1 & 8.2(E350, CARBON)	-	15000	-
Clause - 5, 8.1 & 8.2(E300, CARBON +EQUIVELENT )	-	15000	-
Clause - 5, 8.1 & 8.2(E300, ALUMINIUM)	-	15000	-
Clause - 5, 8.1 & 8.2(E300, SILICON)	-	15000	-
Clause - 5, 8.1 & 8.2(E300, NITROGEN)	-	15000	-
Clause - 5, 8.1 & 8.2(E300 ,MANGANESE)	-	15000	-
Clause - 5, 8.1 & 8.2(E300, PHOSPHURS)	-	15000	-
Clause - 5, 8.1 & 8.2(E300, SULPHUR)	-	15000	-
Clause - 5, 8.1 & 8.2(E300, CARBON)	-	15000	-
Clause - 5, 8.1 & 8.2(E275, CARBON +EQUIVELENT )	-	15000	-
Clause - 5, 8.1 & 8.2(E275, ALUMINIUM)	-	15000	-
Clause - 5, 8.1 & 8.2(E275, SILICON)	-	15000	-
Clause - 5, 8.1 & 8.2(E275, NITROGEN)	-	15000	-
Clause - 5, 8.1 & 8.2(E275 ,MANGANESE)	-	15000	-
Clause - 5, 8.1 & 8.2(E275, PHOSPHURS)	-	15000	-
Clause - 5, 8.1 & 8.2(E275, SULPHUR)	-	15000	-
Clause - 5, 8.1 & 8.2(E275, CARBON)	-	15000	-
Clause - 5, 8.1 & 8.2(E250, CARBON +EQUIVELENT )	-	15000	-
Clause - 5, 8.1 & 8.2(E250, ALUMINIUM)	-	15000	-
Clause - 5, 8.1 & 8.2(E250, SILICON)	-	15000	-
Clause - 5, 8.1 & 8.2(E250, NITROGEN)	-	15000	-
Clause - 5, 8.1 & 8.2(E250 ,MANGANESE)	-	15000	-
Clause - 5, 8.1 & 8.2(E250, PHOSPHURS)	-	15000	-
Clause - 5, 8.1 & 8.2(E250, SULPHUR)	-	15000	-
Clause - 5, 8.1 & 8.2(E250, CARBON)	-	15000	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Vanadium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	15000	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Molybdenum- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	15000	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Chromium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	15000	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Nickel- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	15000	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Copper- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	15000	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Carbon Equivalent- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	15000	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Nitrogen- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	15000	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	15000	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	15000	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	15000	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	15000	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	15000	-
Cl. 15, 16(Off Centre of Web)	-	15000	-
Cl. 15, 16(Flange out of square (I beam))	-	15000	-
Cl. 15, 16(Width of flange (I Beam))	-	15000	-
Cl. 15, 16(Depth (I Beam))	-	15000	-
Cl. 15, 16(Mass (Plate))	-	15000	-
Cl. 15, 16(Flange Slope)	-	15000	-
Cl. 15, 16(Web Thickness)	-	15000	-
Cl. 15, 16(Flange Thickness)	-	15000	-
Cl. 15, 16(Out of Square (Flat))	-	15000	-
Cl. 15, 16(Width )	-	15000	-
Cl. 15, 16(Thickness )	-	15000	-
Cl. 15, 16(Sectional Area )	-	15000	-
Cl. 15, 16(Camber (Angle))	-	15000	-
Cl. 15, 16(Out of Square (Angle))	-	15000	-
Cl. 15, 16(Weight)	-	15000	-
Cl. 15, 16(Leg Length Difference (Angle))	-	15000	-
Cl. 15, 16(Leg Length B (Angle))	-	15000	-
Cl. 15, 16(Leg Length A (Angle))	-	15000	-
Cl. 15, 16(Toe Radius R2)	-	15000	-
Cl. 15, 16(Root Radius R1)	-	15000	-
Cl 18(Weight)	-	15000	-
Cl 15(Length, Width & Thickness)	-	15000	-
Cl 13(Y Groove Cracking Test)	-	15000	-
Cl 12(Sudden Load Applied)	-	15000	-
Cl 11.3(Press)	-	15000	-
Cl 10.3(UTM)	-	15000	-
Cl 7(Workmanship)	-	15000	-
14.1(Soundness test)	-	15000	-
14.2(Grain Size)	-	15000	-
14.2(Inclusion)	-	15000	-
Cl 7(Workmanship)	-	15000	-
Cl 10.3(UTM)	-	15000	-
Cl 11.3(Press)	-	15000	-
Cl 12(Sudden Load Applied)	-	15000	-
Cl 13(Y Groove Cracking Test)	-	15000	-
Cl 15(Length, Width & Thickness)	-	15000	-
Cl 18(Weight)	-	15000	-
Clause 8, Table 1, Note 2(Any Instrumental Method/Chemical Method)	-	15000	-
Clause 8, Table 1, Note 5(Any Instrumental Method/Chemical Method)	-	15000	-
Clause 8, Table 1, Note 5(Any Instrumental Method/Chemical Method)	-	15000	-
Clause 8, Table 1, Note 5(By Calculation)	-	15000	-
Clause 8, Table 1, Note 6(Any Instrumental Method/Chemical Method)	-	15000	-
Clause 8, Table 1, Note 6(By Calculation)	-	15000	-
Clause 7(IS 2062)	-	15000	-
Clause 11.3(IS 1599)	-	15000	-
Clause 12(IS 1757)	-	15000	-
Clause 15, Table 4(IS 2062)	-	15000	-
16(Tolerance)	-	15000	-
20(Marking)	-	15000	-
20(MARKING)	-	15000	-
8(Micro Alloying elements)	-	15000	-
8(Niobium as Nb)	-	15000	-
8(Vanadium as V)	-	15000	-
8(Titanium as Ti)	-	15000	-
10(Tensile Strength-IS:1608(P1)-22)	-	15000	-
10(Yield Stress-IS:1608(P1)-22)	-	15000	-
10(Elongation on SoA 5.65mm GL)	-	15000	-
15(Mass -SOP MT-23)	-	15000	-
15(Sectional Area)	-	15000	-
15(Dimension -D)	-	15000	-
15(Dimension -B)	-	15000	-
15(Thickness - t)	-	15000	-
15(Thickness - T)	-	15000	-
15(Flange Slope)	-	15000	-
15(Radius R1)	-	15000	-
15(Radius R2)	-	15000	-
15(Mass -SOP MT-23)	-	15000	-
15(Sectional Area)	-	15000	-
15(Dimension -D)	-	15000	-
15(Dimension -B)	-	15000	-
15(Thickness - t)	-	15000	-
15(Thickness - T)	-	15000	-
15(Radius R1)	-	15000	-
15(Radius R2)	-	15000	-
15(Mass -SOP MT-23)	-	15000	-
15(Sectional Area)	-	15000	-
15(Dimensions AxB)	-	15000	-
15(Thickness - t)	-	15000	-
15(Radius -R1)	-	15000	-
15(Radius -R2)	-	15000	-
15(Diameter)	-	15000	-
15(Sectional Area)	-	15000	-
15(Mass per metre)	-	15000	-
15(Mass per metre)	-	15000	-
15(Ovality)	-	15000	-
15(Side Width)	-	15000	-
15(Sectional Area)	-	15000	-
15(Mass per metre)	-	15000	-
15(Out of Square)	-	15000	-
9(Preparation of test sample)	-	15000	-
Clause 8, Table 1, Note 2(Aluminium)	-	15000	-
Clause 8, Table 1, Note 5(Niobium)	-	15000	-
Clause 8, Table 1, Note 5(Titanium)	-	15000	-
Clause 8, Table 1, Note 5(Nb+V+Ti)	-	15000	-
Clause 8, Table 1, Note 6(Boron)	-	15000	-
Clause 8, Table 1, Note 6(Cr+Ni)	-	15000	-
Clause 7(Freedom from Defect)	-	15000	-
Clause 11.3(Bend Test)	-	15000	-
Clause 12(Impact Test)	-	15000	-
Clause 15, Table 4(Dimension)	-	15000	-
5(General Requirements)	-	15000	-
4(MARKING)	-	15000	-

-
Included w.e.f. 09.10.2025

2694

Ratlam Smart Laboratory (IOCL)

8192614

IS 1459 (2018)

Kerosene - Specification (Fourth Revision)

11920 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2-Table 1-i)(Appearance)	-	200	-
4.2-Table 1-iv)(Colour a)Saybolt (in cas of undyedKerosene)3), Min b)Visual (in case of dyed Kerosene))	-	1130	-
4.2-Table 1-v)(Copper strip corrosion for 3 h at 50°C)	-	1130	-
4.2-Table 1-vi)(Density at 15°C, kg/m3)	-	1130	-
4.2-Table 1-vii)(Distillation a)Percent recovered below200°C, percent (v/v), Min b)Final boiling point, °C, Max )	-	2650	-
4.2-Table 1-viii)(Flash point ( Abel), °C, Min)	-	1900	-
4.2-Table 1-ix)(Smoke Point4), mm, Min)	-	1130	-
4.2-Table 1-x)(Total Sulphur Content, percent, m/m, Max)	-	2650	-

05 Dec, 2028

-
Excluding: 4.2-Table 1-ii) (Acidity, inorganic) 4.2-Table 1-iii) (Burning quality2) a)Char Value, mg/kg of oil consumed, Max b)Bloom on glass Chimney) 5.1 (Packing) 5.2 (Marking)

2695

Ratlam Smart Laboratory (IOCL)

8192614

IS 1593 (2018)

Fuel oils - Specification (Third Revision)

10820 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.6-Table 1-v)(Density at 15°C kg/m3or Relative density at 15.6/15.6°C)	-	1130	-
4.6-Table 1-vi)(Flash point (Pensky Martens (closed), °C, Min)	-	1900	-
4.6-Table 1-vii)(Kinematic viscosity in centistokes at 50°C)	-	2270	-
4.6-Table 1-viii)(Sediment, percent by mass, Max)	-	1740	-
4.6-Table 1-ix)(Sulphur, total, percent by mass, Max2))	-	2650	-
4.6-Table 1-x)(Water content, percent by volume, Max)	-	1130	-
4.6-Table 1-iv)(Gross, calorific value)	-	0.00	-

05 Dec, 2028

-
Excluding: 4.1 (General) 4.2 (Pour Point) 4.3 (Asphaltene Content) 4.4 (TOTAL SEDIMENT) 4.5 (Spot Test) 4.6-Table 1-i) (Acidity, inorganic) 4.6-Table 1-ii) (Ash, percent by mass, Max)4.6-Table 1-iii) (Carbon residue, mass percent, Max) 5.1 (Packing) 5.2 (Marking)4.6-Table 1-iv) (Gross, calorific value)

2696

Ratlam Smart Laboratory (IOCL)

8192614

IS 15770 (2021)

Heating Oil(LDO) - Specification

10980 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.2-Table 1-v)(Copper strip corrosion for 3 h at 100 °C)	-	0	FNA
3.2-Table 1-ix)(Density at 15 °C, Kg/m3)	-	1130	-
3.2-Table 1-vi)(Flash point, Pensky Martens ,°C, Min)	-	1900	-
3.2-Table 1-vii)(Kinematic viscosity at 40 °C, mm2 /sec)	-	2270	-
3.2-Table 1-iv)(Pour Point, °C, Max a) Winter [November toFebruary (both months inclusive)], b) Summer (rest of the months in a year))	-	1900	-
3.2-Table 1-xi)(Total sulphur, percent by mass)	-	2650	-
3.2-Table 1-x)(Water content, percent by volume, Max)	-	1130	-
3.2-Table 1-viii)(Sediment, percent by mass, Max)	-	0.00	FNA

05 Dec, 2028

-
Excluding: 3.1 (General) 3.2-Table 1-i) (Acid number, mg KOH/gm, Max) 3.2-Table 1-ii) (Ash, percent by mass, Max) 3.2-Table 1-iii) (Carbon residue, on whole samples, percent by mass, Max) 5.1 (Packing) 5.2 (Marking) 3.2-Table 1-v) (Copper strip corrosion for 3 h at 100 °C) 3.2-Table 1-viii) (Sediment, percent by mass, Max)

2697

BIS, Western Regional Laboratory (WRL)

None

IS 15801 (2008)

Polypropylene - Random copolymer pipes for hot and cold water supplies - Specification

4200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 4 ( Designation)	-
Cl 7 (Dimensions Of Pipes)	-
Cl 8 (Visual Appearance)	-
Cl 9.1 (Hydraulic Characteristics)	-
Cl 9.2 (Fusion Compatibility)	-
Cl 9.3 (Reversion Test )	-
Cl 9.4 & Annex B (Impact Strength)	-
Cl 9.6 (Melt Flow Rate)	-
Cl 9.7 (Carbon Black Content & Dispersion)	-
Cl 9.9 (Opacity)	-
5 (Colour)	-

-
-

2698

BIS, Western Regional Laboratory (WRL)

None

IS 14756 (2024)

Stainless Steel Utensils - Specification (THIRD REVISION)

Rs. 9462 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 6.7 (Nominal Capacity Test)	-
Cl 8 (Marking)	-
6.1 (Staining Test)	-
6.2 (Mechanical Shock Test)	-
Cl 4.3 (Classification)	-
Cl 5.1 (Manufacturing defect & visual appearance)	-
5 (Workmanship and finish)	-
4.2 (Thickness of the sheet)	-

-
-

2699

Ratlam Smart Laboratory (IOCL)

8192614

IS 15464 (2022)

ANHYDROUS ETHANOL FOR USE AS BLENDING COMPONENT IN MOTOR GASOLINE SPECIFICATION First Revision

6660 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.4-Table 1-i)(Appearance)	-	200	-
4.4-Table 1-viii)(Acidity (as CH3 COOH), mg/kg, Max.)	-	1140	-
4.4-Table 1-ix)(Alkalinity, mg/kg, Max.)	-	400	-
4.4-Table 1-ii)(Relative density at 15.6/15.6 °C, Max)	-	1130	-
4.4-Table 1-iii)(Ethanol, percent, v/v, Min1)). (excluding denaturant))	-	1340	-
4.4-Table 1-xix)(Miscibility with water)	-	380	-
4.4-Table 1-vii)(Residue on evaporation, percent by mass, Max.)	-	2070	-
4.4-Table 1-iv)(Ethanol, percent, v/v, Min1). (excluding denaturant))	-	1340	FNA

05 Dec, 2028

-
Excluding: 4.1 (Description) 4.4-Table 1-v) (Higher saturated alcohols (C3-C5), percent, v/v, Max) 4.4-Table 1-vi) (Boiling point, °C, Min.) 4.3 (Acidity) 4.4-Table 1-x) (Aldehyde (as CH3 CHO) content, mg/l, Max) 4.4-Table 1-xi) (Electrical conductivity, µS/m, Max) 4.4-Table 1-xii) (Copper, mg/kg, Max.) 4.4-Table 1-xiii) (pHe) 4.4-Table 1-xiv) (Inorganic chloride, mg/kg, Max.) 4.4-Table 1-xvi) (Sulphate content, mg/kg Max.) 4.4-Table 1-xvii) (Water content, percent v/v, Max.) 4.4-Table 1-xviii) (Hydrocarbons, percent v/v) 5.1 (Packing) 5.1 (Packing) 5.2 (Marking) 7.1 (Tests shall be conducted) 4.4-Table 1 iv (Methanol) 4.4-Table 1-xv) (Sulfur content, mg/kg, Max.) 4.2 (Denaturant) 4.4-Table 1-iv) (Ethanol, percent, v/v, Min1). (excluding denaturant))

2700

COCHIN SMART LABORATORY (IOCL)

6193614

IS 16861 (2018)

High flash high speed diesel fuel - Specification

39940 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.3-Table 1-i)(Appearance)	-	200	-
3.3-Table 1-xi)(Density3) at 15°C, kg/m3 , Max)	-	1130	-
3.3-Table 1-viii)(Distillation, percent (v/v), recovered a) at 350°C, Min b) at 370°C Min)	-	2650	-
3.3-Table 1-xii)(Total sulphur4), % by mass, Max)	-	2650	-
3.3-Table 1-vii)(Copper strip Corrosion for 3 h at 100°C)	-	1130	-
3.3-Table 1-x)(Kinematic viscosity, cSt, at 40°C)	-	2270	-
3.3-Table 1-v)(Cetane index1), Min)	-	3770	-
3.3-Table 1-ii)(Acid Number, mg KOH/g, Max)	-	2270	-
3.3-Table 1-ix)(Flash Point Pensky Martens closed cup °C, Min)	-	1900	-
3.3-Table 1-vi)(Pour Point2), Max a) Winter b) Summer)	-	1900	-
3.3-Table 1-xiv)(Cold filter plugging point (CFPP), °C)	-	1900	-
3.3-Table 1-iii)(Ash, percent by mass, Max)	-	2070	-
3.3-Table 1-iv)(Carbon residue on the 10 percent Volume Distillation Residue, mass %, Max)	-	1900	-

15 Dec, 2028

-
Exclusion: 3.1 (General) 3.2 (Composition) 3.3-Table 1-xiii) (Water content, ppm, max.) 3.3-Table 1-xv) (Oxidation Stability5), g/m3 , Max) 3.3-Table 1-xvi) (Lubricity6), Corrected WSD at 60°C, microns max) 5.1 (Packing) 5.2 (Marking)

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number