BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

14026 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

2911

VERTEX TESTING LABORATORY PRIVATE LIMITED, GHAZIABAD

8185906

IS 1328 (1996)

Veneered Decorative Plywood -Specification

BWR,MR/Type-1,2/All Size

8400 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Grade - For BWR)	-	200	-
4.1(Grade - For MR)	-	200	-
4.2(Type - For Type 1)	-	400	-
4.2(Type - For Type 2)	-	400	-
7.1.1(Requirements - Open splits, checks or open joints - For Type 1 - Cl. 7.1.1)	-	400	-
7.2.1(Requirements - Open splits, checks or open joints - For Type 2 - Cl. 7.2.1)	-	400	-
7.1.2(Requirements - Other defects - For Type 1 - Cl. 7.1.2)	-	400	-
7.2.2(Requirements - Other defects - For Type 2 - Cl. 7.2.2.)	-	400	-
7.1.3(Requirements - Other Charcteristics and Manufacturing Defects - For Type 1 - Cl. 7.1.3)	-	400	-
7.2.3(Requirements - Other Charcteristics and Manufacturing Defects - For Type 2 - Cl. 7.2.3)	-	400	-
8(Dimensions & Tolerances - Length - Cl. 8)	-	400	-
8(Dimensions & Tolerances - Width - Cl. 8)	-	400	-
8(Dimensions & Tolerances - Thickness - Cl. 8)	-	400	-
8(Dimensions & Tolerances - Edge Straightness - Annexure C)	-	400	-
8(Dimensions & Tolerances - Squareness - Annexure C)	-	400	-
9(Finish - Cl. 9.1, 8.3)	-	400	-
9(Finish - Cl. 9.2, 8.3)	-	400	-
11(Tests - Moisture Content - Part 1 of IS 1734)	-	400	-
11(Tests - Water Resistance Test - Cl. 11.1.2.1 [for MR Grade])	-	400	-
11(Tests - Water Resistance Test - Cl. 11.1.2.2 [for BWR Grade])	-	400	-
6.1(Decorative Veneers (Thickness))	-	400	-

23 May, 2028

-
Included w.e.f 24.06.2025

2912

Gravitas Laboratories Private Limited, Greater Noida

8182606

IS 17875 (2022)

Stainless Steel seamless pipes and tubes for general service

All Size

20000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.0 (Table No.- 1)(Chemical Composition,% - IS 228)	-	10000	-
10.1 (Table No.- 4)(Tensile Test,Mpa - IS 1608)	-	10000	-
11(Transverse Tension Test,%)	-	10000	-
12 (Table No.- 5)(Hardness Test,HRC,HRB&BHN- IS 1500 (Part 1) or IS 1586 (Part 1))	-	10000	-
13 (Table No.- 7)(Flaring Test)	-	10000	-
14(Flattaning Test-IS 2328)	-	10000	-
15.1 (Table No.- 8)(Grain Size,No.-IS 4748)	-	10000	-
17(Leak Tighteness Test)	-	10000	-
18("Corrosion Test-IS 10461 (Part 1) or IS 10461 (Part 2)")	-	10000	-
21(Workmanship, Finish and Appearance)	-	10000	-
23 (Table No.- 9,10&11)(Dimensions and Tolerances,mm)	-	10000	-
"Clause 8.1 and 8.2 - Table 1"(Carbon)	-	10000	-
"Clause 8.1 and 8.2 - Table 1"(Silicon)	-	10000	-
"Clause 8.1 and 8.2 - Table 1"(Mangnese)	-	10000	-
"Clause 8.1 and 8.2 - Table 1"(Nickel)	-	10000	-
"Clause 8.1 and 8.2 - Table 1"(Chromium)	-	10000	-
"Clause 8.1 and 8.2 - Table 1"(Molybdenum)	-	10000	-
"Clause 8.1 and 8.2 - Table 1"(Sulphur)	-	10000	-
"Clause 8.1 and 8.2 - Table 1"(Phosphorous)	-	10000	-
"Clause 8.1 and 8.2 - Table 1"(Nitrogen)	-	10000	-
"Clause 8.1 and 8.2 - Table 1"(Copper)	-	10000	-
"Clause 8.1 and 8.2 - Table 1"(Aluminium)	-	10000	-
"Clause 8.1 and 8.2 - Table 1"(Titanium)	-	10000	-
"Clause 8.1 and 8.2 - Table 1"(Niobium)	-	10000	-
"Clause 18 IS 10461(Part 1)"(Corrosion Test)	-	10000	-
Clause 10.1 - Table 4(Tensile Strength)	-	10000	-
Clause 10.1 - Table 4(Percent Elongation)	-	10000	-
Clause 11(Transverse Tension Test)	-	10000	-
Clause 12(Hardness Test)	-	10000	-
Clause 13(Flaring Test)	-	10000	-
Clause 14(Flattening Test)	-	10000	-
Clause 23 Annexure A, Table 9 Table 10(Dimensions & Tolerances)	-	10000	-
10.2(Hardness test IS 1500 (part-1):2019)	-	10000	-
12.2(Flaring test IS 17878:2022)	-	10000	-
"Clause 8.1 and 8.2 - Table 1"(W)	-	10000	-
"Clause 8.1 and 8.2 - Table 1"(Ta)	-	10000	-
"Clause 8.1 and 8.2 - Table 2"(V)	-	10000	-
Clause 15(Grain Size)	-	10000	-
Clause 17(Leak Tightness Test)	-	10000	-
"Clause 18 IS 10461(Part 2)"(Corrosion Test)	-	10000	-
Clause 21(Workmanship, Finish & Appearance)	-	10000	-
8.0 (Table No.- 1)(Chemical Composition,% - IS 228)	-	0	-
10.1 (Table No.- 4)(Tensile Test,Mpa - IS 1608)	-	0	-
11(Transverse Tension Test,%)	-	0	-
12 (Table No.- 5)(Hardness Test,HRC,HRB&BHN- IS 1500 (Part 1) or IS 1586 (Part 1))	-	0	-
13 (Table No.- 7)(Flaring Test)	-	0	-
14(Flattaning Test-IS 2328)	-	0	-
15.1 (Table No.- 8)(Grain Size,No.-IS 4748)	-	0	-
17(Leak Tighteness Test)	-	0	-
18("Corrosion Test-IS 10461 (Part 1) or IS 10461 (Part 2)")	-	0	-
21(Workmanship, Finish and Appearance)	-	0	-
23 (Table No.- 9,10&11)(Dimensions and Tolerances,mm)	-	0	-
"Clause 8.1 and 8.2 - Table 1"(Carbon)	-	0	-
"Clause 8.1 and 8.2 - Table 1"(Silicon)	-	0	-
"Clause 8.1 and 8.2 - Table 1"(Mangnese)	-	0	-
"Clause 8.1 and 8.2 - Table 1"(Nickel)	-	0	-
"Clause 8.1 and 8.2 - Table 1"(Chromium)	-	0	-
"Clause 8.1 and 8.2 - Table 1"(Molybdenum)	-	0	-
"Clause 8.1 and 8.2 - Table 1"(Sulphur)	-	0	-
"Clause 8.1 and 8.2 - Table 1"(Phosphorous)	-	0	-
"Clause 8.1 and 8.2 - Table 1"(Nitrogen)	-	0	-
"Clause 8.1 and 8.2 - Table 1"(Copper)	-	0	-
"Clause 8.1 and 8.2 - Table 1"(Aluminium)	-	0	-
"Clause 8.1 and 8.2 - Table 1"(Titanium)	-	0	-
"Clause 8.1 and 8.2 - Table 1"(Niobium)	-	0	-
"Clause 18 IS 10461(Part 1)"(Corrosion Test)	-	0	-
Clause 10.1 - Table 4(Tensile Strength)	-	0	-
Clause 10.1 - Table 4(Percent Elongation)	-	0	-
Clause 11(Transverse Tension Test)	-	0	-
Clause 12(Hardness Test)	-	0	-
Clause 13(Flaring Test)	-	0	-
Clause 14(Flattening Test)	-	0	-
Clause 23 Annexure A, Table 9 Table 10(Dimensions & Tolerances)	-	0	-
10.2(Hardness test IS 1500 (part-1):2019)	-	0	-
12.2(Flaring test IS 17878:2022)	-	0	-
"Clause 8.1 and 8.2 - Table 1"(W)	-	0	-
"Clause 8.1 and 8.2 - Table 1"(Ta)	-	0	-
"Clause 8.1 and 8.2 - Table 2"(V)	-	0	-
Clause 15(Grain Size)	-	0	-
Clause 17(Leak Tightness Test)	-	0	-
"Clause 18 IS 10461(Part 2)"(Corrosion Test)	-	0	-
Clause 21(Workmanship, Finish & Appearance)	-	0	-

19 Nov, 2027

-
Included w.e.f 16.07.2025 Exclusion: Eddy Current

2913

Sleen India Biz venture Private Limited, Agra

9139736

IS 5557 : Part 1 (2024)

All Rubber Gum Boots and Ankle Boots Part 1 Safety and Protective

Footwear

60500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5(Design)	-	500	-
6(Sizes and Fittines)	-	500	-
7(Consturction)	-	800	-
8.1(Lining Material)	-	200	-
8.2, Table-1 (i)(Width, mm, Min)	-	300	-
8.2, Table-1 (ii)(Breaking load, N, Min (50 cm grip length test specimen))	-	800	-
8.3, Table-2 (i)(Sewing thread for piping/binding")	-	1500	-
8.4(Use of Rubber material)	-	0	-
8.4.1, Table-3 (i)(Hardness, (IRHD))	-	500	-
8.4.1, Table-3 (ii)(Change in hardness after accelerated ageing at 100 ⁰C ± 2 ⁰C for 24 h)	-	1000	-
8.5(Upper material)	-	0	-
8.5.1(Tensile Strength of upper)	-	1000	-
8.5.2(Thickness)	-	400	-
8.5.3(Flexing Resistance)	-	1000	-
8.5.4(Abrasion Resistance)	-	1000	-
8.6.1(Thickness of Outsole)	-	500	-
8.6.2(Tear Strength)	-	1000	-
8.6.3(Abrasion Resistance of Outsole)	-	1000	-
8.6.4(Flexing Resistance)	-	1000	-
8.6.5(Inter layer Bond Strength of outsole)	-	1000	-
Cl-8.7(Insocks material)	-	0	-
8.7.1(Thickness of Insocks)	-	500	-
Cl-8.7.2(Abrasion Resistance of Insock)	-	700	-
Cl-8.8.1(Outsole/Heel)	-	800	-
Cl-8.9(Leak Proof Test)	-	1000	-
8.10(Height of Upper)	-	300	-
8.11(Adhesion Test for Rubberized Textile Upper)	-	800	-
Cl-8.12(Upper Outsole Bond Strength)	-	700	-
Cl-8.13(Internal Length of Toe Cap)	-	800	-
Cl-8.14(Impact Resistance of Safety Footwear)	-	500	-
Cl-8.15(Compression Resistance of Safety Footwear)	-	500	-
8.16(Banned Chemicals)	-	30000	-
8.17(Ceramic Tile Floor with sodium lauryl sulphate (NaLS))	-	3000	-
8.17(Steel Floor with Glycerine)	-	0	Test price for cl. 8.17 is 3000/-.
8.18(Corrosion Resistant Test for Toe Caps)	-	500	-
9.1(Penetration Resistance)	-	1000	-
9.2(Antistatic Footwear)	-	1000	-
9.3(Flame Resistance Property)	-	1000	-
9.4(Electrical Resistance)	-	1000	-
9.5(Resistance to Acid and Alkali- Limited contact with chemicals),)	-	1000	-
9.5(Resistance to Acid and Alkali- Prolonged contact with chemicals)	-	0	Test price for cl. 9.5 Resistance to Acid and Alkali is 1000/-.
9.6(Resistance to Fuel Oil)	-	1000	-
11.2(Marking)	-	500	-
Cl-5(Design)	-	0	-
6(Sizes and Fittines)	-	0	-
7(Consturction)	-	0	-
8.1(Lining Material)	-	0	-
8.2, Table-1 (i)(Width, mm, Min)	-	0	-
8.2, Table-1 (ii)(Breaking load, N, Min (50 cm grip length test specimen))	-	0	-
8.3, Table-2 (i)(Sewing thread for piping/binding")	-	0	-
8.4(Use of Rubber material)	-	0	-
8.4.1, Table-3 (i)(Hardness, (IRHD))	-	0	-
8.4.1, Table-3 (ii)(Change in hardness after accelerated ageing at 100 ⁰C ± 2 ⁰C for 24 h)	-	0	-
8.5(Upper material)	-	0	-
8.5.1(Tensile Strength of upper)	-	0	-
8.5.2(Thickness)	-	0	-
8.5.3(Flexing Resistance)	-	0	-
8.5.4(Abrasion Resistance)	-	0	-
8.6.1(Thickness of Outsole)	-	0	-
8.6.2(Tear Strength)	-	0	-
8.6.3(Abrasion Resistance of Outsole)	-	0	-
8.6.4(Flexing Resistance)	-	0	-
8.6.5(Inter layer Bond Strength of outsole)	-	0	-
Cl-8.7(Insocks material)	-	0	-
8.7.1(Thickness of Insocks)	-	0	-
Cl-8.7.2(Abrasion Resistance of Insock)	-	0	-
Cl-8.8.1(Outsole/Heel)	-	0	-
Cl-8.9(Leak Proof Test)	-	0	-
8.10(Height of Upper)	-	0	-
8.11(Adhesion Test for Rubberized Textile Upper)	-	0	-
Cl-8.12(Upper Outsole Bond Strength)	-	0	-
Cl-8.13(Internal Length of Toe Cap)	-	0	-
Cl-8.14(Impact Resistance of Safety Footwear)	-	0	-
Cl-8.15(Compression Resistance of Safety Footwear)	-	0	-
8.16(Banned Chemicals)	-	0	-
8.17(Ceramic Tile Floor with sodium lauryl sulphate (NaLS))	-	0	-
8.17(Steel Floor with Glycerine)	-	0	-
8.18(Corrosion Resistant Test for Toe Caps)	-	0	-
9.1(Penetration Resistance)	-	0	-
9.2(Antistatic Footwear)	-	0	-
9.3(Flame Resistance Property)	-	0	-
9.4(Electrical Resistance)	-	0	-
9.5(Resistance to Acid and Alkali- Limited contact with chemicals),)	-	0	-
9.5(Resistance to Acid and Alkali- Prolonged contact with chemicals)	-	0	-
9.6(Resistance to Fuel Oil)	-	0	-
11.2(Marking)	-	0	-
Cl-5(Design)	-	0	-
6(Sizes and Fittines)	-	0	-
7(Consturction)	-	0	-
8.1(Lining Material)	-	0	-
8.2, Table-1 (i)(Width, mm, Min)	-	0	`
8.2, Table-1 (ii)(Breaking load, N, Min (50 cm grip length test specimen))	-	0	-
8.3, Table-2 (i)(Sewing thread for piping/binding")	-	0	`
8.4(Use of Rubber material)	-	0	`
8.4.1, Table-3 (i)(Hardness, (IRHD))	-	0	-
8.4.1, Table-3 (ii)(Change in hardness after accelerated ageing at 100 ⁰C ± 2 ⁰C for 24 h)	-	0	-
8.5(Upper material)	-	0	-
8.5.1(Tensile Strength of upper)	-	0	-
8.5.2(Thickness)	-	0	-
8.5.3(Flexing Resistance)	-	0	-
8.5.4(Abrasion Resistance)	-	0	-
8.6.1(Thickness of Outsole)	-	0	-
8.6.2(Tear Strength)	-	0	-
8.6.3(Abrasion Resistance of Outsole)	-	0	-
8.6.4(Flexing Resistance)	-	0	-
8.6.5(Inter layer Bond Strength of outsole)	-	0	-
Cl-8.7(Insocks material)	-	0	-
8.7.1(Thickness of Insocks)	-	0	-
Cl-8.7.2(Abrasion Resistance of Insock)	-	0	-
Cl-8.8.1(Outsole/Heel)	-	0	-
Cl-8.9(Leak Proof Test)	-	0	-
8.10(Height of Upper)	-	0	-
8.11(Adhesion Test for Rubberized Textile Upper)	-	0	-
Cl-8.12(Upper Outsole Bond Strength)	-	0	-
Cl-8.13(Internal Length of Toe Cap)	-	0	-
Cl-8.14(Impact Resistance of Safety Footwear)	-	0	-
Cl-8.15(Compression Resistance of Safety Footwear)	-	0	-
8.16(Banned Chemicals)	-	0	-
8.17(Ceramic Tile Floor with sodium lauryl sulphate (NaLS))	-	0	-
8.17(Steel Floor with Glycerine)	-	0	-
8.18(Corrosion Resistant Test for Toe Caps)	-	0	-
9.1(Penetration Resistance)	-	0	-
9.2(Antistatic Footwear)	-	0	-
9.3(Flame Resistance Property)	-	0	-
9.4(Electrical Resistance)	-	0	-
9.5(Resistance to Acid and Alkali- Limited contact with chemicals),)	-	0	-
9.5(Resistance to Acid and Alkali- Prolonged contact with chemicals)	-	0	-
9.6(Resistance to Fuel Oil)	-	0	-
11.2(Marking)	-	0	-
Cl-5(Design)	-	0	-
6(Sizes and Fittines)	-	0	``
7(Consturction)	-	0	-
8.1(Lining Material)	-	0	-
8.2, Table-1 (i)(Width, mm, Min)	-	0	-
8.2, Table-1 (ii)(Breaking load, N, Min (50 cm grip length test specimen))	-	0	-
8.3, Table-2 (i)(Sewing thread for piping/binding")	-	0	-
8.4(Use of Rubber material)	-	0	-
8.4.1, Table-3 (i)(Hardness, (IRHD))	-	0	-
8.4.1, Table-3 (ii)(Change in hardness after accelerated ageing at 100 ⁰C ± 2 ⁰C for 24 h)	-	0	-
8.5(Upper material)	-	0	-
8.5.1(Tensile Strength of upper)	-	0	-
8.5.2(Thickness)	-	0	-
8.5.3(Flexing Resistance)	-	0	-
8.5.4(Abrasion Resistance)	-	0	-
8.6.1(Thickness of Outsole)	-	0	-
8.6.2(Tear Strength)	-	0	-
8.6.3(Abrasion Resistance of Outsole)	-	0	-
8.6.4(Flexing Resistance)	-	0	-
8.6.5(Inter layer Bond Strength of outsole)	-	0	-
Cl-8.7(Insocks material)	-	0	-
8.7.1(Thickness of Insocks)	-	0	-
Cl-8.7.2(Abrasion Resistance of Insock)	-	0	-
Cl-8.8.1(Outsole/Heel)	-	0	-
Cl-8.9(Leak Proof Test)	-	0	-
8.10(Height of Upper)	-	0	-
8.11(Adhesion Test for Rubberized Textile Upper)	-	0	-
Cl-8.12(Upper Outsole Bond Strength)	-	0	-
Cl-8.13(Internal Length of Toe Cap)	-	0	-
Cl-8.14(Impact Resistance of Safety Footwear)	-	0	-
Cl-8.15(Compression Resistance of Safety Footwear)	-	0	-
8.16(Banned Chemicals)	-	0	-
8.17(Ceramic Tile Floor with sodium lauryl sulphate (NaLS))	-	0	-
8.17(Steel Floor with Glycerine)	-	0	-
8.18(Corrosion Resistant Test for Toe Caps)	-	0	-
9.1(Penetration Resistance)	-	0	-
9.2(Antistatic Footwear)	-	0	-
9.3(Flame Resistance Property)	-	0	-
9.4(Electrical Resistance)	-	0	-
9.5(Resistance to Acid and Alkali- Limited contact with chemicals),)	-	0	-
9.5(Resistance to Acid and Alkali- Prolonged contact with chemicals)	-	0	-
9.6(Resistance to Fuel Oil)	-	0	-
11.2(Marking)	-	0	-

15 May, 2027

-
Included w.e.f 18.08.2025

2914

INTERNATIONAL TESTING AND COMPLIANCE (OPC) PRIVATE LIMITED

8188026

IS 16270 (2023)

Secondary cells and batteries for solar photovoltaic application - General requirements and methods of test

700000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4.1(Photovoltaic Energy System)	-	25000	-
Cl-4.2(Secondary Cells and Batteries)	-	25000	-
Cl-4.3(General Operating Conditions)	-	25000	-
Cl-4.3.8(Storage)	-	25000	-
Cl-4.3.9(Operating Temperature)	-	25000	-
Cl-5.1(Mechanical Endurance)	-	25000	-
Cl-5.2(Charge Efficiency)	-	25000	-
Cl-5.3(Deep Discharge Protection)	-	25000	-
Cl-5.4(Marking)	-	25000	-
Cl-5.5(Safety)	-	25000	-
Cl-5.6(Documentation)	-	25000	-
Cl-6(Functional characteristice)	-	25000	-
Cl-7(General test conditions)	-	25000	-
Cl-8.1(Capacity Test)	-	25000	-
Cl-8.2(Endurance Test)	-	250000	-
Cl-8.3(Charge Retention Test)	-	25000	-
Cl-8.4(Cycle Endurance in Photovoltaic Application (Extreme Conditions))	-	25000	-
Cl-8.5(Sulphation Test (Applicable for Lead Acid Batteries only))	-	25000	-
Cl-8.6(Water Loss Test (Valid for Flooded Lead Acid Batteries only))	-	5000	-
Cl-9.1(Type Tests)	-	5000	-
Cl-9.2(Acceptance Test)	-	5000	-
4.3.7.1(Specific gravity)	-	5000	-

08 Sep, 2028

-
-

2915

Arihant Analytical Laboratory Pvt. Ltd., Sonipat

9167906

IS 9396 : Part 2 (2012)

Round open top sanitary cans for foods and drinks - Specification: Part 2 sizes and general requirements (Second Revision)

All Type

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1.1(Diameter)	-	15000	-
4.1.2(Capacities and Tinplate Thicknes)	-	15000	-
4.3(Internal Finish)	-	15000	-
4.4(External Treatment)	-	15000	-
5.1(Air Pressure Test)	-	15000	-
6( Packing And Conditions Of Supply)	-	15000	-
7(Marking)	-	15000	-

02 Jun, 2027

-
Included w.e.f.04.07.2025

2916

Bharat Test House Pvt. Ltd. 1668 Sonipat

9168306

IS 14650 (2023)

UNALLOYED AND ALLOYED STEEL INGOT AND SEMI-FINISHED PRODUCTS FOR RE-ROLLING PURPOSES - SPECIFICATION (First Revision)

CPS 2062/E250BR , CPS 1079/HR2 , CPS 2002/3 , CPS 2041/R260 , CPS 1786/Fe500D , CPS 6911/304 , CPS 7904/HC42A

6000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause - 7.1(CARBON)	-	3500	-
Clause - 7.1(SULPHUR)	-	3500	-
Clause - 7.1(PHOSPHURS)	-	3500	-
Clause - 7.1(MANGANESE)	-	3500	-
Clause - 7.1(NITROGEN)	-	3500	-
As per Clause 10(Dimension)	-	500	-
As per Clause 10.1(Dimension Width)	-	500	-
As per Clause 10.1(Dimension Thickness)	-	500	-
As per Clause 10.2(Dimension Length)	-	500	-
As per Clause 11/11.1/11.2/11.3/11.4(Tolerances)	-	1000	-
As per Clause 11.5(Bend)	-	1000	-
As per Clause 11.6(Camber)	-	1000	-
As per Clause 11.7 (i)(Out of Square)	-	1000	-
As per Clause 11.7 (ii)(Round Corners)	-	1000	-
As per Clause 11.7 (iii)(Ridges due to gas cutting)	-	1000	-
As per Clause 11.7 (iv)(Taper (Width variation on top and bottom surface at one location)	-	1000	-
As per Clause 11.7 (v)(Edge slanting (Width variation on top and bottom surface at one location)	-	1000	-
As per Clause 11.7 (vi)(Convexity(Difference in thickness from edge to curve)	-	1000	-
As per Clause 11.7 (vii)(Chamfering (Length variation on top and bottom surface at one location)	-	1000	-
As per Clause 11.7 (viii)(Wedge (Thickness variation at the edges along the cross section)	-	1000	-
As per Clause 11.7 (ix)(Scarfing pits)	-	1000	-
As per Clause 12/12.1/12.2/12.3(Freedom from defects)	-	500	-
Clause. 13(Macro examination test.)	-	0	-
Clause. 13(Macro examination test.)	-	0	-
Clause. 13(Sulphur print.)	-	0	-
Clause. 13(Inclusion content)	-	0	-
Clause. 14(Marking)	-	500	-
Clause.15(Ordering information)	-	500	-
Clause.6.0(Manufacture)	-	500	-
Clause.7.1(Silicon)	-	3500	-
Clause.7.1(Carbon Equbalant)	-	3500	-
Clause.7.1(Microalloy element)	-	3500	-

26 Jul, 2027

-
Included w.e.f 23.07.2025 Excluding Clause. 13 Macro examination test, Sulphur Print, Inclusion Content(Optional Tests)

2917

Arihant Analytical Laboratory Pvt. Ltd., Sonipat

9167906

IS 9396 : Part 1 (1987)

Specification for round open top sanitary cans for foods and drinks: Part 1 tinplate (First Revision)

All Type

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(Tinplate- Carbon %)	-	15000	-
3.1(Tinplate- Manganese %)	-	15000	-
3.1(Tinplate- Phosphorus %)	-	15000	-
3.1(Tinplate- Sulphur %)	-	15000	-
3.1(Tinplate- Silicon %)	-	15000	-
3.1(Tinplate- Copper %)	-	15000	-
3.3(Tin Coating Mass- Body)	-	15000	-
3.3(Tin Coating Mass- Ends)	-	15000	-
3.2(Tinplate Thickness and Dimension : Thickness)	-	15000	-
3.2(Tinplate Thickness and Dimension : Feather Edge: the thickness when measured at a distance of 10 mm from the mill trimmed edge shall not deviate from the actual centre thickness by more than −6 %)	-	15000	-
3.2(Tinplate Thickness and Dimension: width)	-	15000	-
3.2(Tinplate Thickness and Dimension : length)	-	15000	-
3.2(Tinplate Thickness and Dimension : Edge camber)	-	15000	-
3.2(Tinplate Thickness and Dimension :Out of squareness of sheet )	-	15000	-
3.2(Tinplate Thickness and Dimension : Flatness)	-	15000	-
3.4(Surface Finish)	-	15000	-
3.4(Surface Finish)	-	15000	-
3.5 Appendix A(Tin Grain Size)	-	15000	-
3.6 Appendix B(Iron Solution Value)	-	15000	-
3.7(Surface Oil Coating)	-	15000	-
3.9(Shape)	-	15000	-
3.1O(Mechanical Properties )	-	15000	-
3.1O(Mechanical Properties )	-	15000	-
3.1(Tinplate- Carbon %)	-	-	-
3.1(Tinplate- Manganese %)	-	-	-
3.1(Tinplate- Phosphorus %)	-	-	-
3.1(Tinplate- Sulphur %)	-	-	-
3.1(Tinplate- Silicon %)	-	-	-
3.1(Tinplate- Copper %)	-	-	-
3.3(Tin Coating Mass- Body)	-	-	-
3.3(Tin Coating Mass- Ends)	-	-	-
3.2(Tinplate Thickness and Dimension : Thickness)	-	-	-
3.2(Tinplate Thickness and Dimension : Feather Edge: the thickness when measured at a distance of 10 mm from the mill trimmed edge shall not deviate from the actual centre thickness by more than −6 %)	-	-	-
3.2(Tinplate Thickness and Dimension: width)	-	-	-
3.2(Tinplate Thickness and Dimension : length)	-	-	-
3.2(Tinplate Thickness and Dimension : Edge camber)	-	-	-
3.2(Tinplate Thickness and Dimension :Out of squareness of sheet )	-	-	-
3.2(Tinplate Thickness and Dimension : Flatness)	-	-	-
3.4(Surface Finish)	-	-	-
3.4(Surface Finish)	-	-	-
3.5 Appendix A(Tin Grain Size)	-	-	-
3.6 Appendix B(Iron Solution Value)	-	-	-
3.7(Surface Oil Coating)	-	-	-
3.9(Shape)	-	-	-
3.1O(Mechanical Properties )	-	-	-
3.1O(Mechanical Properties )	-	-	-

02 Jun, 2027

-
Included w.e.f.04.07.2025

2918

JBS TESTING SOLUTIONS PVT LTD (27), JALANDHAR

9164606

IS 17634 (2022)

Storage Units - Specification

92000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
CLAUSE 5(DIMENSIONS)	-	5000	For cl 5 & 9
CLAUSE 6(SURFACE PERFORMANCE)	-	8000	For cl 6.1
CLAUSE 6.2(Fabric and Leather (Synthetic and Natural) Performance)	-	22500	For cl 6.2 and 7.5
CLAUSE 7.1(SAFETY TESTS (General))	-	18500	For cl 7.1
CLAUSE 7.2(Test for Non-Movable Parts)	-	23000	For cl 7.2
CLAUSE 7.2.1(Shelves)	-	23000	For cl 7.2
CLAUSE 7.2.1.2(Deflection of shelves)	-	23000	For cl 7.2
CLAUSE 7.2.2.1(Sustained load test for tops and bottoms)	-	23000	For cl 7.2
CLAUSE 7.2.2.2(Static load test for tops and bottoms)	-	23000	For cl 7.2
CLAUSE 7.2.3.1(Strength of clothes-rail supports)	-	23000	For cl 7.2
CLAUSE 7.2.3.2(Dislodgement of clothes rail)	-	23000	For cl 7.2
CLAUSE 7.2.4.2(Drop test)	-	23000	For cl 7.2
CLAUSE 7.2.4.3(Tests for units with castors or wheels)	-	23000	For cl 7.2
CLAUSE 7.3.1(Pivoted Doors)	-	15000	For cl 7.3 and 7.4
CLAUSE 7.3.1.2.1(Vertical load on pivoted door)	-	15000	For cl 7.3 and 7.4
CLAUSE 7.3.1.2.2(Horizontal load on pivoted door)	-	15000	For cl 7.3 and 7.4
CLAUSE 7.3.1.3(Slam-shut test of pivoted doors)	-	15000	For cl 7.3 and 7.4
CLAUSE 7.3.1.4(Durability of pivoted doors)	-	15000	For cl 7.3 and 7.4
CLAUSE 7.3.2(Sliding Doors and Horizontal Roll-fronts)	-	15000	For cl 7.3 and 7.4
CLAUSE 7.3.2.2(Slam shut/open test of sliding doors and horizontal roll-fronts)	-	15000	For cl 7.3 and 7.4
CLAUSE 7.3.2.3(Durability of sliding doors and horizontal roll-fronts)	-	15000	For cl 7.3 and 7.4
CLAUSE 7.3.3(Flaps)	-	15000	For cl 7.3 and 7.4
CLAUSE 7.3.3.1(Strength of bottom-hinged flaps)	-	15000	For cl 7.3 and 7.4
CLAUSE 7.3.3.2(Durability of flaps)	-	15000	For cl 7.3 and 7.4
CLAUSE 7.3.3.3(Drop test for top-hinged flaps)	-	15000	For cl 7.3 and 7.4
CLAUSE 7.3.4(Vertical Roll-Fronts)	-	15000	For cl 7.3 and 7.4
CLAUSE 7.3.4.1(Slam shut/open test of vertical roll-fronts)	-	15000	For cl 7.3 and 7.4
CLAUSE 7.3.4.2(Durability of vertical roll-fronts)	-	15000	For cl 7.3 and 7.4
CLAUSE 7.3.5(Extension Element)	-	15000	For cl 7.3 and 7.4
CLAUSE 7.3.5.2(Strength of extension elements)	-	15000	For cl 7.3 and 7.4
CLAUSE 7.3.5.3(Durability of extension elements)	-	15000	For cl 7.3 and 7.4
CLAUSE 7.3.5.4(Slam shut/open test of extension element)	-	15000	For cl 7.3 and 7.4
CLAUSE 7.3.5.5(Displacement of extension element bottoms)	-	15000	For cl 7.3 and 7.4
CLAUSE 7.3.5.6(Interlock test)	-	15000	For cl 7.3 and 7.4
CLAUSE 7.3.6(Locking and Latching Mechanism Tests)	-	15000	For cl 7.3 and 7.4
CLAUSE 7.3.6.2(Strength test for locking and latching mechanisms for extension elements)	-	15000	For cl 7.3 and 7.4
CLAUSE 7.3.6.3(Locking and latching mechanisms for doors, flaps and roll-fronts)	-	14999.98	For cl 7.3 and 7.4
CLAUSE 7.3.6.4(Durability test of locking and latching mechanisms)	-	15000	For cl 7.3 and 7.4
CLAUSE 7.3.7(Pull Force Test)	-	15000	For cl 7.3 and 7.4
CLAUSE 7.3.7(Pull Force Test)	-	15000	For cl 7.3 and 7.4
CLAUSE 7.3.8(Top Load Ease Cycle Test)	-	15000	For cl 7.3 and 7.4
CLAUSE 7.3.9(Durability Test for Units with Seating Surfaces – Cyclic Impact)	-	15000	For cl 7.3 and 7.4
CLAUSE 7.3.10("Drop Test – Dynamic – for Units with Seat Surfaces")	-	15000	For cl 7.3 and 7.4
CLAUSE 7.4.1.3(Sustained load test (overload))	-	15000	For cl 7.3 and 7.4
CLAUSE 7.4.1.4(Dislodgement test)	-	15000	For cl 7.3 and 7.4
CLAUSE 7.5(Stability Tests)	-	22500	For cl 6.2 and 7.5
CLAUSE 7.5.2.1("Units that can be adjusted to a Height of 1 000 mm or less")	-	22500	For cl 6.2 and 7.5
CLAUSE 7.5.2.2("Units that can be adjusted to a height of more than 1 000 mm")	-	22500	For cl 6.2 and 7.5
CLAUSE 7.5.3(Opening Doors, Extension Elements and Flaps, All Storage Units Unloaded)	-	22500	For cl 6.2 and 7.5
CLAUSE 7.5.6(Vertical Force Stability Test for Storage Units)	-	22500	For cl 6.2 and 7.5
CLAUSE 7.5.7(Stability Test for Pedestals/Storage Units with Seat Surfaces)	-	22500	For cl 6.2 and 7.5
CLAUSE 7.5.8("Dynamic Stability Test for Units with Castors")	-	22500	For cl 6.2 and 7.5
CLAUSE 7.5.9(Strength Test for Wall Attachments)	-	22500	For cl 6.2 and 7.5
Cl-6.1 (a)(Resistance to mechanical damage)	-	8000	For cl 6.1
Cl-6.1 (b)(Pencil hardness)	-	8000	For cl 6.1
Cl-6.1 (c)(Resistance to wet heat)	-	8000	For cl 6.1
Cl-6.1 (d)Cl-6.1 (d)(Resistance to dry heat)	-	8000	For cl 6.1
Cl-6.1 (e)(Resistance to marking by cold liquids)	-	8000	For cl 6.1
Cl-6.1 (f)(Resistance to marking by cold oils and fats Resistance to marking by cold oils and fats)	-	8000	For cl 6.1
Cl-6.1 (g)(Adhesive performance)	-	8000	For cl 6.1
Cl-6.2 (a) 1(Breaking load)	-	22500	For cl 6.2 and 7.5
Cl-6.2 (a) 2(Elongation at break)	-	22500	For cl 6.2 and 7.5
Cl-6.2 (a) 3(Tear strength)	-	22500	For cl 6.2 and 7.5
Cl-6.2 (a) 4(Colour fastness to light)	-	22499.98	For cl 6.2 and 7.5
Cl-6.2 (a) 5(Colour fastness to rubbing)	-	22500	For cl 6.2 and 7.5
Cl-6.2 (a) 6(Colour fastness to perspiration)	-	22500	For cl 6.2 and 7.5
Cl-6.2 (a) 7(Colour fastness to water)	-	22500	For cl 6.2 and 7.5
Cl-6.2 (a) 8(Pilling resistance)	-	22500	For cl 6.2 and 7.5
Cl-6.2 (a) 9(Coating adhesion strength)	-	22500	For cl 6.2 and 7.5
Cl-6.2 (a) 10(Seam slippage)	-	22500	For cl 6.2 and 7.5
Cl-6.2 (a) 11(Resistance to damage by flexing)	-	22500	For cl 6.2 and 7.5
Cl-6.2 (a) 12(Abrasion resistance)	-	22500	For cl 6.2 and 7.5
Cl-6.2 (a) 13(Bursting strength)	-	22500	For cl 6.2 and 7.5
Cl-6.2 (a) 14(Resistance to cold)	-	22500	For cl 6.2 and 7.5
Cl-6.2 (b) 1(Tear strength)	-	22500	For cl 6.2 and 7.5
Cl-6.2 (b) 2(Flexing endurance)	-	22500	For cl 6.2 and 7.5
Cl-6.2 (b) 3(Finish adhesion)	-	22500	For cl 6.2 and 7.5
Cl-6.2 (b) 4(Colour fastness to artificial light)	-	22500	For cl 6.2 and 7.5
Cl-6.2 (b) 5(Colour fastness to rubbing)	-	22500	For cl 6.2 and 7.5
Cl-6.2 (b) 6(Colour fastness to water spotting)	-	22500	For cl 6.2 and 7.5
Cl-6.2 (b) 7(Water vapour permeability)	-	22500	For cl 6.2 and 7.5
Cl-6.2 (b) 8(Colour fastness to water)	-	22500	For cl 6.2 and 7.5
Cl-7.1(General)	-	18500	For cl 7.1
Cl-7.2.1(Shelves)	-	23000	For cl 7.2
Cl-7.2.2(Tops and Bottoms)	-	23000	For cl 7.2
Cl-7.2.3(Strength of Clothes Rails and their Supports)	-	23000	For cl 7.2
Cl-7.2.4(Strength of the Structure)	-	23000	For cl 7.2
Cl-7.3.1(Pivoted Doors)	-	15000	For cl 7.3 and 7.4
Cl-7.3.2(Sliding Doors and Horizontal Roll-fronts)	-	15000	For cl 7.3 and 7.4
Cl-7.3.3(Flaps)	-	15000	For cl 7.3 and 7.4
Cl-7.3.4(Vertical Roll-Fronts)	-	15000	For cl 7.3 and 7.4
Cl-7.3.5(Extension Elements)	-	15000	For cl 7.3 and 7.4
Cl-7.3.6(Locking and Latching Mechanism Test)	-	15000	For cl 7.3 and 7.4
Cl-7.3.7(Pull Force Test)	-	15000	For cl 7.3 and 7.4
Cl-7.3.8(Top Load Ease Cycle Test)	-	15000	For cl 7.3 and 7.4
Cl-7.3.9(Durability Test for Units with Seating Surfaces – Cyclic Impact)	-	15000	For cl 7.3 and 7.4
Cl-7.3.10(Drop Test – Dynamic – for Units with Seat Surfaces)	-	15000	For cl 7.3 and 7.4
Cl-7.4.1(Units Not Supported by the Floor)	-	14999.98	For cl 7.3 and 7.4
Cl-7.4.2(Units Supported by the Floor)	-	15000	For cl 7.3 and 7.4
Cl-7.5.1(General)	-	22500	For cl 6.2 and 7.5
Cl-7.5.2(Doors, Extension Elements and Flaps Closed, All Storage Units Unloaded)	-	22500	For cl 6.2 and 7.5
Cl-7.5.3(Opening Doors, Extension Elements and Flaps, All Storage Units Unloaded)	-	22500	For cl 6.2 and 7.5
Cl-7.5.4(Doors, Extension Elements and Flaps Opened and Unlocked)	-	22500	For cl 6.2 and 7.5
Cl-7.5.5(Doors, Extension Elements and Flaps Closed and Locked, All Storage Units Loaded)	-	22500	For cl 6.2 and 7.5
Cl-7.5.6(Vertical Force Stability Test for Storage Units)	-	22500	For cl 6.2 and 7.5
Cl-7.5.7(Stability Test for Pedestals/Storage Units with Seat Surfaces)	-	22500	For cl 6.2 and 7.5
Cl-7.5.8(Dynamic Stability Test for Units with Castors)	-	22500	For cl 6.2 and 7.5
Cl-7.5.9(Strength Test for Wall Attachments)	-	22500	For cl 6.2 and 7.5
Cl-9(Marking)	-	8000	For cl 5 and 9
CLAUSE 5(DIMENSIONS)	-	0	-
CLAUSE 6(SURFACE PERFORMANCE)	-	0	-
CLAUSE 6.2(Fabric and Leather (Synthetic and Natural) Performance)	-	0	-
CLAUSE 7.1(SAFETY TESTS (General))	-	0	-
CLAUSE 7.2(Test for Non-Movable Parts)	-	0	-
CLAUSE 7.2.1(Shelves)	-	0	-
CLAUSE 7.2.1.2(Deflection of shelves)	-	0	-
CLAUSE 7.2.2.1(Sustained load test for tops and bottoms)	-	0	-
CLAUSE 7.2.2.2(Static load test for tops and bottoms)	-	0	-
CLAUSE 7.2.3.1(Strength of clothes-rail supports)	-	0	-
CLAUSE 7.2.3.2(Dislodgement of clothes rail)	-	0	-
CLAUSE 7.2.4.2(Drop test)	-	0	-
CLAUSE 7.2.4.3(Tests for units with castors or wheels)	-	0	-
CLAUSE 7.3.1(Pivoted Doors)	-	0	-
CLAUSE 7.3.1.2.1(Vertical load on pivoted door)	-	0	-
CLAUSE 7.3.1.2.2(Horizontal load on pivoted door)	-	0	-
CLAUSE 7.3.1.3(Slam-shut test of pivoted doors)	-	0	-
CLAUSE 7.3.1.4(Durability of pivoted doors)	-	0	-
CLAUSE 7.3.2(Sliding Doors and Horizontal Roll-fronts)	-	0	-
CLAUSE 7.3.2.2(Slam shut/open test of sliding doors and horizontal roll-fronts)	-	0	-
CLAUSE 7.3.2.3(Durability of sliding doors and horizontal roll-fronts)	-	0	-
CLAUSE 7.3.3(Flaps)	-	0	-
CLAUSE 7.3.3.1(Strength of bottom-hinged flaps)	-	0	-
CLAUSE 7.3.3.2(Durability of flaps)	-	0	-
CLAUSE 7.3.3.3(Drop test for top-hinged flaps)	-	0	-
CLAUSE 7.3.4(Vertical Roll-Fronts)	-	0	-
CLAUSE 7.3.4.1(Slam shut/open test of vertical roll-fronts)	-	0	-
CLAUSE 7.3.4.2(Durability of vertical roll-fronts)	-	0	-
CLAUSE 7.3.5(Extension Element)	-	0	-
CLAUSE 7.3.5.2(Strength of extension elements)	-	0	-
CLAUSE 7.3.5.3(Durability of extension elements)	-	0	-
CLAUSE 7.3.5.4(Slam shut/open test of extension element)	-	0	-
CLAUSE 7.3.5.5(Displacement of extension element bottoms)	-	0	-
CLAUSE 7.3.5.6(Interlock test)	-	0	-
CLAUSE 7.3.6(Locking and Latching Mechanism Tests)	-	0	-
CLAUSE 7.3.6.2(Strength test for locking and latching mechanisms for extension elements)	-	0	-
CLAUSE 7.3.6.3(Locking and latching mechanisms for doors, flaps and roll-fronts)	-	0	-
CLAUSE 7.3.6.4(Durability test of locking and latching mechanisms)	-	0	-
CLAUSE 7.3.7(Pull Force Test)	-	0	-
CLAUSE 7.3.7(Pull Force Test)	-	0	-
CLAUSE 7.3.8(Top Load Ease Cycle Test)	-	0	-
CLAUSE 7.3.9(Durability Test for Units with Seating Surfaces – Cyclic Impact)	-	0	-
CLAUSE 7.3.10("Drop Test – Dynamic – for Units with Seat Surfaces")	-	0	-
CLAUSE 7.4.1.3(Sustained load test (overload))	-	0	-
CLAUSE 7.4.1.4(Dislodgement test)	-	0	-
CLAUSE 7.5(Stability Tests)	-	0	-
CLAUSE 7.5.2.1("Units that can be adjusted to a Height of 1 000 mm or less")	-	0	-
CLAUSE 7.5.2.2("Units that can be adjusted to a height of more than 1 000 mm")	-	0	-
CLAUSE 7.5.3(Opening Doors, Extension Elements and Flaps, All Storage Units Unloaded)	-	0	-
CLAUSE 7.5.6(Vertical Force Stability Test for Storage Units)	-	0	-
CLAUSE 7.5.7(Stability Test for Pedestals/Storage Units with Seat Surfaces)	-	0	-
CLAUSE 7.5.8("Dynamic Stability Test for Units with Castors")	-	0	-
CLAUSE 7.5.9(Strength Test for Wall Attachments)	-	0	-
Cl-6.1 (a)(Resistance to mechanical damage)	-	0	-
Cl-6.1 (b)(Pencil hardness)	-	0	-
Cl-6.1 (c)(Resistance to wet heat)	-	0	-
Cl-6.1 (d)Cl-6.1 (d)(Resistance to dry heat)	-	0	-
Cl-6.1 (e)(Resistance to marking by cold liquids)	-	0	-
Cl-6.1 (f)(Resistance to marking by cold oils and fats Resistance to marking by cold oils and fats)	-	0	-
Cl-6.1 (g)(Adhesive performance)	-	0	-
Cl-6.2 (a) 1(Breaking load)	-	0	-
Cl-6.2 (a) 2(Elongation at break)	-	0	-
Cl-6.2 (a) 3(Tear strength)	-	0	-
Cl-6.2 (a) 4(Colour fastness to light)	-	0	-
Cl-6.2 (a) 5(Colour fastness to rubbing)	-	0	-
Cl-6.2 (a) 6(Colour fastness to perspiration)	-	0	-
Cl-6.2 (a) 7(Colour fastness to water)	-	0	-
Cl-6.2 (a) 8(Pilling resistance)	-	0	-
Cl-6.2 (a) 9(Coating adhesion strength)	-	0	-
Cl-6.2 (a) 10(Seam slippage)	-	0	-
Cl-6.2 (a) 11(Resistance to damage by flexing)	-	0	-
Cl-6.2 (a) 12(Abrasion resistance)	-	0	-
Cl-6.2 (a) 13(Bursting strength)	-	0	-
Cl-6.2 (a) 14(Resistance to cold)	-	0	-
Cl-6.2 (b) 1(Tear strength)	-	0	-
Cl-6.2 (b) 2(Flexing endurance)	-	0	-
Cl-6.2 (b) 3(Finish adhesion)	-	0	-
Cl-6.2 (b) 4(Colour fastness to artificial light)	-	0	-
Cl-6.2 (b) 5(Colour fastness to rubbing)	-	0	-
Cl-6.2 (b) 6(Colour fastness to water spotting)	-	0	-
Cl-6.2 (b) 7(Water vapour permeability)	-	0	-
Cl-6.2 (b) 8(Colour fastness to water)	-	0	-
Cl-7.1(General)	-	0	-
Cl-7.2.1(Shelves)	-	0	-
Cl-7.2.2(Tops and Bottoms)	-	0	-
Cl-7.2.3(Strength of Clothes Rails and their Supports)	-	0	-
Cl-7.2.4(Strength of the Structure)	-	0	-
Cl-7.3.1(Pivoted Doors)	-	0	-
Cl-7.3.2(Sliding Doors and Horizontal Roll-fronts)	-	0	-
Cl-7.3.3(Flaps)	-	0	-
Cl-7.3.4(Vertical Roll-Fronts)	-	0	-
Cl-7.3.5(Extension Elements)	-	0	-
Cl-7.3.6(Locking and Latching Mechanism Test)	-	0	-
Cl-7.3.7(Pull Force Test)	-	0	-
Cl-7.3.8(Top Load Ease Cycle Test)	-	0	-
Cl-7.3.9(Durability Test for Units with Seating Surfaces – Cyclic Impact)	-	0	-
Cl-7.3.10(Drop Test – Dynamic – for Units with Seat Surfaces)	-	0	-
Cl-7.4.1(Units Not Supported by the Floor)	-	0	-
Cl-7.4.2(Units Supported by the Floor)	-	0	-
Cl-7.5.1(General)	-	0	-
Cl-7.5.2(Doors, Extension Elements and Flaps Closed, All Storage Units Unloaded)	-	0	-
Cl-7.5.3(Opening Doors, Extension Elements and Flaps, All Storage Units Unloaded)	-	0	-
Cl-7.5.4(Doors, Extension Elements and Flaps Opened and Unlocked)	-	0	-
Cl-7.5.5(Doors, Extension Elements and Flaps Closed and Locked, All Storage Units Loaded)	-	0	-
Cl-7.5.6(Vertical Force Stability Test for Storage Units)	-	0	-
Cl-7.5.7(Stability Test for Pedestals/Storage Units with Seat Surfaces)	-	0	-
Cl-7.5.8(Dynamic Stability Test for Units with Castors)	-	0	-
Cl-7.5.9(Strength Test for Wall Attachments)	-	0	-
Cl-9(Marking)	-	0	-

04 Dec, 2028

-
Included w.e.f 16.06.2025

2919

INTERNATIONAL TESTING AND COMPLIANCE (OPC) PRIVATE LIMITED

8188026

IS 302 : Part 2 : SEC 31 (2009)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 31 range hoods

40000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause No - 5(GENERAL CONDITIONS FOR THE TESTS)	-	300	-
Clause No - 5.18(linear and angular dimension)	-	300	-
Clause No - 6.2(harmfull ingress of water)	-	300	-
Clause No - 8.1.1("PROTECTION AGAINST ACCESS TO LIVE PART- test probe B")	-	600	-
Clause No - 8.1.2("PROTECTION AGAINST ACCESS TO LIVE PART - test probe 13")	-	600	-
Clause No - 8.2(Addition)	-	600	-
Clause No - 10.1, Table No. -1(power input deviation)	-	1000	-
Clause No - 13.3("LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE")	-	1000	-
Clause No - 13.3,Table No.- 4(voltage for electrical strength)	-	1000	-
Clause No - 14(Impulse test voltage)	-	1200	-
Clause No - 15.1.1(MOISTURE RESISTANCE)	-	1200	-
Clause No -19.7(test is repeated with the capacitor short circuited)	-	400	-
Clause No -21.1(Mechanical strength)	-	500	-
Clause No -22.1(construction)	-	500	-
Clause No -22.11(push force applied)	-	500	-
Clause No -24.1.2(safety isolating transformer)	-	800	-
Clause No -24.1.3(for switches)	-	800	-
Clause No -24.1.4(for automatic control)	-	800	-
Clause No -24.1.5(for innterconnection couplers)	-	800	-
Clause No -24.4(plug and socket)	-	800	-
Clause No -25.8, Table no -11(conductor resistance)	-	800	-
Clause No -25.5(dimension for pins)	-	800	-
Clause No -27.6(for circuit board)	-	800	-
Clause No -29.2(comparative tracking index)	-	1200	-
Clause No -29.3.3(dry heat test)	-	1200	-
Clause No -30.2.1(glow wire test)	-	1200	-
Clause No -30.101("incorporate combustible material")	-	1200	-
15(MOISTURE RESISTANCE)	-	1500	-
16(LEAKAGE CURRENT AND ELECTRIC STRENGTH)	-	1200	-
17(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	1000	-
18(ENDURANCE)	-	500	-
28(SCREWS AND CONNECTIONS)	-	500	-
31(RESISTANCE TO RUSTING)	-	800	-
22(CONSTRUCTION)	-	1000	-
24(COMPONENTS)	-	1000	-
32(RADIATION, TOXICITY AND SIMILAR HAZARDS)	-	500	-
11(Heating)	-	1400	-

08 Sep, 2028

-
Exclusion: Cl.19.11.4.1 to Cl.19.11.4.7 (EMI/EMC), Cl.15(IPX9), Cl.24(Components)

2920

Bharat Test House Pvt. Ltd. 1668 Sonipat

9168306

IS 17788 (2021)

Medical Textiles Nonwoven Fabric for Wipes Specification

8500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 6.1, Table 1, (i)(Fibre identification)	-	500	-
Clause 6.1, table 1, (ii)(Weight per square metre, g/m2)	-	500	-
Caluse 6.1, Table 1, (iii) (a)(Absorption a) Sinking time, s, Max)	-	1000	-
Caluse 6.1, Table 1, (iii) (b)(Absorption b) Water holding capacity, percent, Min)	-	1500	-
Clause 6.1 , Table 1, (iv) (a)(Breaking strength (dry), N, Min a) Machine direction)	-	1500	-
Clause 6.1 , Table 1, (iv) (b)(Breaking strength (dry), N, Min b) Cross direction)	-	1500	-
Clause 6.1, Table 1, (v) (a)(Breaking strength (wet), N, Min a) Machine direction)	-	1500	-
Clause 6.1, Table 1, (v) (b)(Breaking strength (wet), N, Min b) Cross direction)	-	1500	-
Clause 6.1, Table 1, (vi)(pH)	-	1000	-
Clause 6.1, Table 1, (i)(Fibre identification)	-	0	-
Clause 6.1, table 1, (ii)(Weight per square metre, g/m2)	-	0	-
Caluse 6.1, Table 1, (iii) (a)(Absorption a) Sinking time, s, Max)	-	0	-
Caluse 6.1, Table 1, (iii) (b)(Absorption b) Water holding capacity, percent, Min)	-	0	-
Clause 6.1 , Table 1, (iv) (a)(Breaking strength (dry), N, Min a) Machine direction)	-	0	-
Clause 6.1 , Table 1, (iv) (b)(Breaking strength (dry), N, Min b) Cross direction)	-	0	-
Clause 6.1, Table 1, (v) (a)(Breaking strength (wet), N, Min a) Machine direction)	-	0	-
Clause 6.1, Table 1, (v) (b)(Breaking strength (wet), N, Min b) Cross direction)	-	0	-
Clause 6.1, Table 1, (vi)(pH)	-	0	-

26 Jul, 2027

-
Included w.e.f 02.07.2025

2921

ALPHA TEST HOUSE SERVICES LLP (Unit-1), MOHALI

9184906

IS 2095 : Part 3 (2022)

Gypsum Plaster Boards - Specification Part 3 Reinforced Gypsum Plaster Boards Tiles Cornices and Mouldings Third Revision of IS 2095 Part 3

All

44300 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
(Clause 4.1)("CaS04 . 2H2 O, Min")	-	44300	-
Clause 4.1 (ii))(Free water, percent)	-	44300	-
Clause 4.1 ( iii)(" pH a) Natural (mineral) gypsum b) By-product gypsum")	-	44300	-
Clause 4.1 ( iv)("SiO2 , Max")	-	44300	-
Clause 4.1 ( v)(Chloride content, Max)	-	44300	-
Clause 6.1.1("Dimensions of Gypsum Plaster Thickness, Length, Width (mm) ")	-	44300	-
Clause 6.1.2.1(Tolerance on straightness of edge)	-	44300	-
Clause 6.1.2.2(Tolerance on squarencess of edge)	-	44300	-
Clause 6.3(Density kg/m3)	-	44300	-
Clause 6.4.1(Fibre Reinforced Gypsum Plaster Board)	-	44300	-
Clause 6.4.2(Glass Reinforced Gypsum (GRG) Plaster Board)	-	44300	-
Clause 6.5(Impact Strength N-mm/mm2)	-	44300	-
Clause 6.6(Water Absorption)	-	44300	-
Clause 6.7(Jolting Test)	-	44300	-
Clause 9(MARKING)	-	44300	-

25 Apr, 2028

-
Included w.e.f 19.06.2025

2922

ALPHA TEST HOUSE SERVICES LLP (Unit-1), MOHALI

9184906

IS 2095 : Part 2 (2022)

Gypsum plaster boards - specification: Part 2 Coated laminated gypsum plaster boards Third Revision of IS 2095 Part 2

All

42000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 4.1 ( i)("CaS04 . 2H2 O, Min")	-	42000	-
Clause 4.1 (ii))(Free water, percent)	-	42000	-
Clause 4.1 ( iii)(" pH a) Natural (mineral) gypsum b) By-product gypsum")	-	42000	-
Clause 4.1 ( iv)("SiO2 , Max")	-	42000	-
Clause 4.1 ( v)(Chloride content, Max)	-	42000	-
(Clause 6.1.1)(Dimensions - Width,Length, Thickness (mm))	-	42000	-
(Clause 6.1.2)(Tolerance on Shape)	-	42000	-
(Clause 6.2)(Density)	-	42000	-
(Clause 6.3)(" Flexural Breaking Load ")	-	42000	-
(Clause 6.5)("Finish ")	-	42000	-
(Clauses 7.1.2 )(Sampling of Gypsum Plaster Board)	-	42000	-

25 Apr, 2028

-
Included w.e.f 19.06.2025 Exclusion: (Clause 6.4) (Fire Resistance)

2923

Stellar Test House, Noida

8171606

IS 712 (1984)

Specification for building limes (Third Revision)

14000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 4.1 - Table 1 - i(Calcium and Magnesium Oxides, on ignited basis - IS 6932 (part 1) : 1973)	-	500	-
Cl. 4.1 - Table 1 - ii(Magnesium Oxides, on ignited basis - IS 6932 (part 1) : 1973)	-	500	-
Cl. 4.1 - Table 1 - iii(Silica, Alumina and Ferric oxide, on ignited basis - IS 6932 (part 1) : 1973)	-	500	-
Cl. 4.1 - Table 1 - iv(Unhydrated Magnesium oxide, on ignited basis - IS 6932 (part 5) : 1973)	-	500	-
Cl. 4.1 - Table 1 - v(Insoluble Residue in dilute acid and alkali, on ignited basis - IS 6932 (part 1) : 1973)	-	500	-
Cl. 4.1 - Table 1 - vi(Carbondioxide on oven dried basis - IS 6932 (part 2) : 1973)	-	500	-
Cl. 4.1 - Table 1 - vii(Free moisture content - IS 1514 : 1959)	-	300	-
Cl. 4.1 - Table 1 - viii(Available lime as CaO (dry basis) - IS 1514 : 1959)	-	700	-
Cl 4 ,Table 1(Chem reqd)	-	0	-
cl 4, Table 2(Physical reqd)	-	0	-
Clauses 5.1 Table No. 2, SI No. (ix) (Popping Pitting)	-	1000	-
Clauses 5.1 Table No. 2, SI No. (viii) (Soundness- Le chatelier Expansion)	-	1000	-
Clauses 5.1 Table No. 2, SI No. (vi) (Workability Bumps)	-	1000	-
Clauses 5.1 Table No. 2, SI No. (v) (Transverse strength at 28 days)	-	1500	-
Clauses 5.1 Table No. 2, SI No. (iv) b) (Compressive strength at 28 days)	-	750	-
Clauses 5.1 Table No. 2, SI No. (iv) a) (Compressive strength at 14 days)	-	750	-
Clauses 5.1 Table No. 2, SI No. (iii) b) (Final Setting time)	-	500	-
Clauses 5.1 Table No. 2, SI No. (iii) a) (Initial Setting time)	-	500	-
Clauses 5.1 Table No. 2, SI No. (ii) b) (Residue on slaking (Residue on 300 micron IS sieve))	-	500	-
Clauses 5.1 Table No. 2, SI No. (ii) a) (Residue on slaking (Residue on 850 micron IS sieve))	-	500	-
Clauses 5.1 Table No. 2, SI No. (i) c) (Fineness- (Residue on 212 micron IS Sieve))	-	500	-
Clauses 5.1 Table No. 2, SI No. (i) b) (Fineness- (Residue on 300 micron IS Sieve))	-	500	-
Clauses 5.1 Table No. 2, SI No. (i) a) (Fineness- (Residue on 2.36 mm IS Sieve))	-	500	-
Cl. 4.1 - Table 1 - i(Calcium and Magnesium Oxides, on ignited basis - IS 6932 (part 1) : 1973)	-	0	-
Cl. 4.1 - Table 1 - ii(Magnesium Oxides, on ignited basis - IS 6932 (part 1) : 1973)	-	0	-
Cl. 4.1 - Table 1 - iii(Silica, Alumina and Ferric oxide, on ignited basis - IS 6932 (part 1) : 1973)	-	0	-
Cl. 4.1 - Table 1 - iv(Unhydrated Magnesium oxide, on ignited basis - IS 6932 (part 5) : 1973)	-	0	-
Cl. 4.1 - Table 1 - v(Insoluble Residue in dilute acid and alkali, on ignited basis - IS 6932 (part 1) : 1973)	-	0	-
Cl. 4.1 - Table 1 - vi(Carbondioxide on oven dried basis - IS 6932 (part 2) : 1973)	-	0	-
Cl. 4.1 - Table 1 - vii(Free moisture content - IS 1514 : 1959)	-	0	-
Cl. 4.1 - Table 1 - viii(Available lime as CaO (dry basis) - IS 1514 : 1959)	-	0	-
Cl 4 ,Table 1(Chem reqd)	-	0	-
cl 4, Table 2(Physical reqd)	-	0	-
Clauses 5.1 Table No. 2, SI No. (ix) (Popping Pitting)	-	0	-
Clauses 5.1 Table No. 2, SI No. (viii) (Soundness- Le chatelier Expansion)	-	0	-
Clauses 5.1 Table No. 2, SI No. (vi) (Workability Bumps)	-	0	-
Clauses 5.1 Table No. 2, SI No. (v) (Transverse strength at 28 days)	-	0	-
Clauses 5.1 Table No. 2, SI No. (iv) b) (Compressive strength at 28 days)	-	0	-
Clauses 5.1 Table No. 2, SI No. (iv) a) (Compressive strength at 14 days)	-	0	-
Clauses 5.1 Table No. 2, SI No. (iii) b) (Final Setting time)	-	0	-
Clauses 5.1 Table No. 2, SI No. (iii) a) (Initial Setting time)	-	0	-
Clauses 5.1 Table No. 2, SI No. (ii) b) (Residue on slaking (Residue on 300 micron IS sieve))	-	0	-
Clauses 5.1 Table No. 2, SI No. (ii) a) (Residue on slaking (Residue on 850 micron IS sieve))	-	0	-
Clauses 5.1 Table No. 2, SI No. (i) c) (Fineness- (Residue on 212 micron IS Sieve))	-	0	-
Clauses 5.1 Table No. 2, SI No. (i) b) (Fineness- (Residue on 300 micron IS Sieve))	-	0	-
Clauses 5.1 Table No. 2, SI No. (i) a) (Fineness- (Residue on 2.36 mm IS Sieve))	-	0	-
Cl. 4.1 - Table 1 - i(Calcium and Magnesium Oxides, on ignited basis - IS 6932 (part 1) : 1973)	-	0	-
Cl. 4.1 - Table 1 - ii(Magnesium Oxides, on ignited basis - IS 6932 (part 1) : 1973)	-	0	-
Cl. 4.1 - Table 1 - iii(Silica, Alumina and Ferric oxide, on ignited basis - IS 6932 (part 1) : 1973)	-	0	-
Cl. 4.1 - Table 1 - iv(Unhydrated Magnesium oxide, on ignited basis - IS 6932 (part 5) : 1973)	-	0	-
Cl. 4.1 - Table 1 - v(Insoluble Residue in dilute acid and alkali, on ignited basis - IS 6932 (part 1) : 1973)	-	0	-
Cl. 4.1 - Table 1 - vi(Carbondioxide on oven dried basis - IS 6932 (part 2) : 1973)	-	0	-
Cl. 4.1 - Table 1 - vii(Free moisture content - IS 1514 : 1959)	-	0	-
Cl. 4.1 - Table 1 - viii(Available lime as CaO (dry basis) - IS 1514 : 1959)	-	0	-
Cl 4 ,Table 1(Chem reqd)	-	0	-
cl 4, Table 2(Physical reqd)	-	0	-
Clauses 5.1 Table No. 2, SI No. (ix) (Popping Pitting)	-	0	-
Clauses 5.1 Table No. 2, SI No. (viii) (Soundness- Le chatelier Expansion)	-	0	-
Clauses 5.1 Table No. 2, SI No. (vi) (Workability Bumps)	-	0	-
Clauses 5.1 Table No. 2, SI No. (v) (Transverse strength at 28 days)	-	0	-
Clauses 5.1 Table No. 2, SI No. (iv) b) (Compressive strength at 28 days)	-	0	-
Clauses 5.1 Table No. 2, SI No. (iv) a) (Compressive strength at 14 days)	-	0	-
Clauses 5.1 Table No. 2, SI No. (iii) b) (Final Setting time)	-	0	-
Clauses 5.1 Table No. 2, SI No. (iii) a) (Initial Setting time)	-	0	-
Clauses 5.1 Table No. 2, SI No. (ii) b) (Residue on slaking (Residue on 300 micron IS sieve))	-	0	-
Clauses 5.1 Table No. 2, SI No. (ii) a) (Residue on slaking (Residue on 850 micron IS sieve))	-	0	-
Clauses 5.1 Table No. 2, SI No. (i) c) (Fineness- (Residue on 212 micron IS Sieve))	-	0	-
Clauses 5.1 Table No. 2, SI No. (i) b) (Fineness- (Residue on 300 micron IS Sieve))	-	0	-
Clauses 5.1 Table No. 2, SI No. (i) a) (Fineness- (Residue on 2.36 mm IS Sieve))	-	0	-
Clauses 5.1 Table No. 2, SI No. (vii) (Volume yield)	-	1000	-
Cl. 4.1 - Table 1 - i(Calcium and Magnesium Oxides, on ignited basis - IS 6932 (part 1) : 1973)	-	0	-
Cl. 4.1 - Table 1 - ii(Magnesium Oxides, on ignited basis - IS 6932 (part 1) : 1973)	-	0	-
Cl. 4.1 - Table 1 - iii(Silica, Alumina and Ferric oxide, on ignited basis - IS 6932 (part 1) : 1973)	-	0	-
Cl. 4.1 - Table 1 - iv(Unhydrated Magnesium oxide, on ignited basis - IS 6932 (part 5) : 1973)	-	0	-
Cl. 4.1 - Table 1 - v(Insoluble Residue in dilute acid and alkali, on ignited basis - IS 6932 (part 1) : 1973)	-	0	-
Cl. 4.1 - Table 1 - vi(Carbondioxide on oven dried basis - IS 6932 (part 2) : 1973)	-	0	-
Cl. 4.1 - Table 1 - vii(Free moisture content - IS 1514 : 1959)	-	0	-
Cl. 4.1 - Table 1 - viii(Available lime as CaO (dry basis) - IS 1514 : 1959)	-	0	-
Cl 4 ,Table 1(Chem reqd)	-	0	-
cl 4, Table 2(Physical reqd)	-	0	-
Clauses 5.1 Table No. 2, SI No. (ix) (Popping Pitting)	-	0	-
Clauses 5.1 Table No. 2, SI No. (viii) (Soundness- Le chatelier Expansion)	-	0	-
Clauses 5.1 Table No. 2, SI No. (vi) (Workability Bumps)	-	0	-
Clauses 5.1 Table No. 2, SI No. (v) (Transverse strength at 28 days)	-	0	-
Clauses 5.1 Table No. 2, SI No. (iv) b) (Compressive strength at 28 days)	-	0	-
Clauses 5.1 Table No. 2, SI No. (iv) a) (Compressive strength at 14 days)	-	0	-
Clauses 5.1 Table No. 2, SI No. (iii) b) (Final Setting time)	-	0	-
Clauses 5.1 Table No. 2, SI No. (iii) a) (Initial Setting time)	-	0	-
Clauses 5.1 Table No. 2, SI No. (ii) b) (Residue on slaking (Residue on 300 micron IS sieve))	-	0	-
Clauses 5.1 Table No. 2, SI No. (ii) a) (Residue on slaking (Residue on 850 micron IS sieve))	-	0	-
Clauses 5.1 Table No. 2, SI No. (i) c) (Fineness- (Residue on 212 micron IS Sieve))	-	0	-
Clauses 5.1 Table No. 2, SI No. (i) b) (Fineness- (Residue on 300 micron IS Sieve))	-	0	-
Clauses 5.1 Table No. 2, SI No. (i) a) (Fineness- (Residue on 2.36 mm IS Sieve))	-	0	-
Clauses 5.1 Table No. 2, SI No. (vii) (Volume yield)	-	0	-

26 Sep, 2028

-
Included w.e.f 12.09.2025

2924

IEC TEST LABS LLP

8165726

IS 12776 (2002)

Galvanized strand for earthing - Specification (First Revision)

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.2(Freedom From Defects (IS 12776))	-	1000	-
5.3(Joints in wires (IS 12776))	-	1000	-
6- Annex-A, Sl-2(Size of the wire (IS 12776))	-	1000	-
6- Annex-A, Sl-8(Lay (IS 12776))	-	1000	-
8.1-Annex-A,Sl-9(Breaking Force of Strand (IS 12776))	-	5000	-
8.2-Annex-A,Sl-6(Elongation of wire, IS 10810(Part-37))	-	2000	-
8.2-Annex-A,Sl-3(Tensile Strength of wire IS 10810(Part-37))	-	2000	-
8.3-Annex-A,Sl-12(Resistance at 200 C (IS 12776))	-	2000	-
8.4(Wrapping Test (IS 12776))	-	2000	-
8.5-Annex-A-Sl-7a(Amount of zinc Coating (IS 6745))	-	2000	-
8.5-Annex-A-Sl-7b(Uniformity of Coating (IS 2633))	-	2000	-
8.5-Annex-A-Sl-4(Torsion Test IS 10810(Part-37))	-	2000	-
4.1(Carbon- IS 228(Part 1))	-	2000	-
4.1(Sulphur- IS 228(Part 9))	-	2000	-
4.1(Phosphorous- IS 228(Part 3))	-	2000	-
4.1(Manganese- IS 228(Part 2))	-	2000	-
4.1(Silicon- IS 228(Part 8))	-	2000	-
6- Annex-A, Sl-8(Lay Length)	-	1000	-
5.2(Freedom From Defects (IS 12776))	-	1000	-
5.3(Joints in wires (IS 12776))	-	1000	-
6- Annex-A, Sl-2(Size of the wire (IS 12776))	-	1000	-
6- Annex-A, Sl-8(Lay (IS 12776))	-	1000	-
8.1-Annex-A,Sl-9(Breaking Force of Strand (IS 12776))	-	5000	-
8.2-Annex-A,Sl-6(Elongation of wire, IS 10810(Part-37))	-	2000	-
8.2-Annex-A,Sl-3(Tensile Strength of wire IS 10810(Part-37))	-	2000	-
8.3-Annex-A,Sl-12(Resistance at 200 C (IS 12776))	-	2000	-
8.4(Wrapping Test (IS 12776))	-	2000	-
8.5-Annex-A-Sl-7a(Amount of zinc Coating (IS 6745))	-	2000	-
8.5-Annex-A-Sl-7b(Uniformity of Coating (IS 2633))	-	2000	-
8.5-Annex-A-Sl-4(Torsion Test IS 10810(Part-37))	-	2000	-
4.1(Carbon- IS 228(Part 1))	-	2000	-
4.1(Sulphur- IS 228(Part 9))	-	2000	-
4.1(Phosphorous- IS 228(Part 3))	-	2000	-
4.1(Manganese- IS 228(Part 2))	-	2000	-
4.1(Silicon- IS 228(Part 8))	-	2000	-
6- Annex-A, Sl-8(Lay Length)	-	2000	-
5.2(Freedom From Defects (IS 12776))	-	1000	-
5.3(Joints in wires (IS 12776))	-	1000	-
6- Annex-A, Sl-2(Size of the wire (IS 12776))	-	2000	-
6- Annex-A, Sl-8(Lay (IS 12776))	-	2000	-
8.1-Annex-A,Sl-9(Breaking Force of Strand (IS 12776))	-	3000	-
8.2-Annex-A,Sl-6(Elongation of wire, IS 10810(Part-37))	-	3000	-
8.2-Annex-A,Sl-3(Tensile Strength of wire IS 10810(Part-37))	-	2000	-
8.3-Annex-A,Sl-12(Resistance at 200 C (IS 12776))	-	3000	-
8.4(Wrapping Test (IS 12776))	-	2000	-
8.5-Annex-A-Sl-7a(Amount of zinc Coating (IS 6745))	-	2000	-
8.5-Annex-A-Sl-7b(Uniformity of Coating (IS 2633))	-	2000	-
8.5-Annex-A-Sl-4(Torsion Test IS 10810(Part-37))	-	2000	-
4.1(Carbon- IS 228(Part 1))	-	2000	-
4.1(Sulphur- IS 228(Part 9))	-	2000	-
4.1(Phosphorous- IS 228(Part 3))	-	2000	-
4.1(Manganese- IS 228(Part 2))	-	2000	-
4.1(Silicon- IS 228(Part 8))	-	2000	-
6- Annex-A, Sl-8(Lay Length)	-	1000	-

07 Sep, 2026

-
Included .w.e.f.18.07.2025

2925

JBS TESTING SOLUTIONS PVT LTD (27), JALANDHAR

9164606

IS 4003 : Part 1 (2024)

Pipe Wrenches - Specification Part 1 General Purpose(Second revision)

19000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause. 4.0(Dimensions)	-	5000	For dimensional and qualitative tests
Clause.5.0(Carbon)	-	5000	For Complete chemical tests
Clause.5.0(Sulphur)	-	4999.99	For Complete chemical tests
Clause.5.0(Phosphorus)	-	5000	For Complete chemical tests
Clause.5.0(Niobium)	-	4999.98	For Complete chemical tests
Clause.5.0(Vanadium)	-	5000	For Complete chemical tests
Clause.5.0(Nickel)	-	5000	For Complete chemical tests
Clause.5.0(Molybdenum)	-	5000	For Complete chemical tests
Clause.5.0(Chromium)	-	5000	For Complete chemical tests
Clause.5.0(Silicon)	-	5000	For Complete chemical tests
Clause.5.0(Manganese)	-	5000	For Complete chemical tests
Clause.6.0(Hardness)	-	1500	For hardness testing
Clause.7.0(Manufacture)	-	5000	For dimensional and qualitative tests
Clause.7.1(Handle)	-	4999.99	For dimensional and qualitative tests
Clause.7.2(Movable Jaws)	-	5000	For dimensional and qualitative tests
Clause.7.3(Adjusting Nut)	-	5000	For dimensional and qualitative tests
Clause.7.4(Frame)	-	5000	For dimensional and qualitative tests
Clause.7.5(Hinge Pin)	-	5000	For dimensional and qualitative tests
Clause.7.6(Spring)	-	5000	For dimensional and qualitative tests
Clause.8.0(Workmanship & finish)	-	5000	For dimensional and qualitative tests
Clause.9.0(Operation)	-	5000	For dimensional and qualitative tests
Clause.10.0(Sampling)	-	5000	For dimensional and qualitative tests
Clause.11.0(Tests)	-	5000	For dimensional and qualitative tests
Clause.11.1(Static Load Test)	-	7500	For mechanical and other load tests
Clause.11.2(Static-Shock Load Test)	-	7500	For mechanical and other load tests
Clause.12.0(Designation)	-	5000	For dimensional and qualitative tests
Clause.13(Marking)	-	5000	For dimensional and qualitative tests

04 Dec, 2028

-
Included w.e.f 06.06.2025

2926

Bharat Test House Pvt. Ltd. 1668 Sonipat

9168306

IS 17787 (2021)

Medical Textiles Nonwoven Wipes Specification

15200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 6.1, Table 1, (i)(Length and width, mm)	-	500	-
Clause 6.1, Table 1, (ii)(pH)	-	1000	-
Clause 6.1, Table 1, (iii)(Total viable count, (cfu/g), Max)	-	1000	-
Clause 6.1, Table 1, (iv)(Pseudomonas aeruginosa)	-	1000	-
Clause 6.1, Table 1, (v)(Staphylococcus aureus)	-	1000	-
Clause 6.1, Table 1, (vi)(Candida albicans)	-	1200	-
Clause 6.1, Table 1, (vii)(E. coli)	-	1000	-
Clause 6.1, Table 1, (viii)(Anti-bacterial activity (optional), absorption method,)	-	0	-
Clause 6.3(Seal Leakage Test)	-	1000	-

26 Jul, 2027

-
Included w.e.f 04.07.2025 Exclusion: Cl 6.1 Table 1(viii) Anti-Bacterial Activity(optional)

2927

ALAIPURIA TEST HOUSE PRIVATE LIMITED, GHAZIABAD

8180426

IS 302 : Part 1 (2024)

Household and Similar Electrical Appliances â Safety Part 1 General Requirements (Seventh Revision)

45000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
12(Charging of metal-ion batteries)	-	1000	-
6(Classification- IS 302-1)	-	500	-
5(General conditions for the tests)	-	500	-
11.8(Temperature rise)	-	1000	-
11.7(Duration corresponding)	-	1000	-
11.6(Combined appliances)	-	500	-
11.5(Motor-operated appliances)	-	1000	-
11.4(Heating appliances)	-	1000	-
8.1.5(Live parts of built-in appliances)	-	500	-
18(Endurance)	-	0	-
17(Overload protection of transformers and associated circuits)	-	1000	-
16(Leakage current and electric strength)	-	1000	-
4(General requirement)	-	500	-
31(Resistance to Rusting)	-	500	-
30.2(Needle Flame Test)	-	1000	-
30.2(Glow Wire Test)	-	1000	-
30.1(Ball pressure test)	-	500	-
29(clearance, creepage distances and solid insulation)	-	1000	-
28(Screw test and connections)	-	500	-
27.1(Provision for Earthing, IS 302-1)	-	1000	-
26(Terminals for external conductors)	-	500	-
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
24(Components)	-	500	-
23.1(Internal Wiring, IS 302-1)	-	500	-
22.1(Construction, IS 302-1)	-	500	-
21.1(Mechanical Strength, IS 302-1)	-	1000	-
20.1(Stability & Mechanical Hazards, IS 302-1)	-	500	-
19(Abnormal Operation)	-	1000	-
18(Endurance)	-	0	-
17(Over Load Protection of Transformers and associated circuits)	-	1000	-
16.3(Electric Strength (after clause 15 and 16.2))	-	1000	-
16.2(Leakage Current (after Clause 15))	-	500	-
16.1(General)	-	500	-
16.0(General)	-	1000	-
15.3(Humidity Test)	-	500	-
15.2(Spillage Test)	-	500	-
15.1(Ingress Protection test other than IPX0 (IP test))	-	500	-
15.0(Moisture resistance)	-	1000	-
14(Transient Over Voltages)	-	1000	-
13.3(Electric Strength at operating temperature)	-	1000	-
13.2(Leakage current at operating temperature)	-	500	-
13(Leakage current and electric strength at operating temperature)	-	1000	-
11.3(Heating)	-	1000	-
11.2(General)	-	500	-
11.1(General)	-	500	-
10.2(Current input)	-	500	-
10.1(Power input)	-	1000	-
9(Starting of motor operation test requirements and tests)	-	1000	-
8.1.4(Protection against live parts against protective impedance)	-	500	-
8.1.3(Protection against live parts in visible glowing heating elements)	-	500	-
8.1.2(Protection against live parts in openings)	-	500	-
8.1.1(Protection against live parts in all positions)	-	1000	-
7(Marking and instructions)	-	500	-
A.2(Earth continuity test)	-	1000	-
Annex C(Ageing test on motors)	-	1000	-
Annex D(Thermal motor protectors)	-	1000	-
15.2(Moisture resistance)	-	500	-
19.17(Abnormal Operation, IS 302-1)	-	1000	-
20.2(Stability & Mechanical Hazards, IS 302-1)	-	1000	-
21.2(Mechanical Strength, IS 302-1)	-	500	-
21.3(Mechanical Strength, IS 302-1)	-	1000	-
22.5(Construction)	-	500	-
22.6(Construction, IS 302-1)	-	500	-
22.11(Construction, IS 302-1)	-	500	-
22.16(Construction)	-	500	-
22.32(Construction, IS 302-1)	-	500	-
22.42(Construction)	-	500	-
23.3(Internal Wiring, IS 302-1)	-	1000	-
25.6(Supply connection and external flexible cords, IS 302-1)	-	1000	-
25.7(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
26.5(Terminals for external conductors)	-	500	-
27.5(Provision for Earthing, IS 302-1)	-	1000	-
28.1(Screws and connections)	-	1000	-
22.2(Construction, IS 302-1)	-	1000	-
22.3(Construction, IS 302-1)	-	1000	-
B.22.4(Construction, IS 302-1)	-	1000	-
B.22.5(Construction, IS 302-1)	-	1000	-
12(Charging of metal-ion batteries)	-	0	-
6(Classification- IS 302-1)	-	0	-
5(General conditions for the tests)	-	0	-
11.8(Temperature rise)	-	0	-
11.7(Duration corresponding)	-	0	-
11.6(Combined appliances)	-	0	-
11.5(Motor-operated appliances)	-	0	-
11.4(Heating appliances)	-	0	-
8.1.5(Live parts of built-in appliances)	-	0	-
18(Endurance)	-	0	-
17(Overload protection of transformers and associated circuits)	-	0	-
16(Leakage current and electric strength)	-	0	-
4(General requirement)	-	0	-
31(Resistance to Rusting)	-	0	-
30.2(Needle Flame Test)	-	0	-
30.2(Glow Wire Test)	-	0	-
30.1(Ball pressure test)	-	0	-
29(clearance, creepage distances and solid insulation)	-	0	-
28(Screw test and connections)	-	0	-
27.1(Provision for Earthing, IS 302-1)	-	0	-
26(Terminals for external conductors)	-	0	-
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
24(Components)	-	0	-
23.1(Internal Wiring, IS 302-1)	-	0	-
22.1(Construction, IS 302-1)	-	0	-
21.1(Mechanical Strength, IS 302-1)	-	0	-
20.1(Stability & Mechanical Hazards, IS 302-1)	-	0	-
19(Abnormal Operation)	-	0	-
18(Endurance)	-	0	-
17(Over Load Protection of Transformers and associated circuits)	-	0	-
16.3(Electric Strength (after clause 15 and 16.2))	-	0	-
16.2(Leakage Current (after Clause 15))	-	0	-
16.1(General)	-	0	-
16.0(General)	-	0	-
15.3(Humidity Test)	-	0	-
15.2(Spillage Test)	-	0	-
15.1(Ingress Protection test other than IPX0 (IP test))	-	0	-
15.0(Moisture resistance)	-	0	-
14(Transient Over Voltages)	-	0	-
13.3(Electric Strength at operating temperature)	-	0	-
13.2(Leakage current at operating temperature)	-	0	-
13(Leakage current and electric strength at operating temperature)	-	0	-
11.3(Heating)	-	0	-
11.2(General)	-	0	-
11.1(General)	-	0	-
10.2(Current input)	-	0	-
10.1(Power input)	-	0	-
9(Starting of motor operation test requirements and tests)	-	0	-
8.1.4(Protection against live parts against protective impedance)	-	0	-
8.1.3(Protection against live parts in visible glowing heating elements)	-	0	-
8.1.2(Protection against live parts in openings)	-	0	-
8.1.1(Protection against live parts in all positions)	-	0	-
7(Marking and instructions)	-	0	-
A.2(Earth continuity test)	-	0	-
Annex C(Ageing test on motors)	-	0	-
Annex D(Thermal motor protectors)	-	0	-
15.2(Moisture resistance)	-	0	-
19.17(Abnormal Operation, IS 302-1)	-	0	-
20.2(Stability & Mechanical Hazards, IS 302-1)	-	0	-
21.2(Mechanical Strength, IS 302-1)	-	0	-
21.3(Mechanical Strength, IS 302-1)	-	0	-
22.5(Construction)	-	0	-
22.6(Construction, IS 302-1)	-	0	-
22.11(Construction, IS 302-1)	-	0	-
22.16(Construction)	-	0	-
22.32(Construction, IS 302-1)	-	0	-
22.42(Construction)	-	0	-
23.3(Internal Wiring, IS 302-1)	-	0	-
25.6(Supply connection and external flexible cords, IS 302-1)	-	0	-
25.7(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
26.5(Terminals for external conductors)	-	0	-
27.5(Provision for Earthing, IS 302-1)	-	0	-
28.1(Screws and connections)	-	0	-
22.2(Construction, IS 302-1)	-	0	-
22.3(Construction, IS 302-1)	-	0	-
B.22.4(Construction, IS 302-1)	-	0	-
B.22.5(Construction, IS 302-1)	-	0	-
12(Charging of metal-ion batteries)	-	0	-
6(Classification- IS 302-1)	-	0	-
5(General conditions for the tests)	-	0	-
11.8(Temperature rise)	-	0	-
11.7(Duration corresponding)	-	0	-
11.6(Combined appliances)	-	0	-
11.5(Motor-operated appliances)	-	0	-
11.4(Heating appliances)	-	0	-
8.1.5(Live parts of built-in appliances)	-	0	-
18(Endurance)	-	0	-
17(Overload protection of transformers and associated circuits)	-	0	-
16(Leakage current and electric strength)	-	0	-
4(General requirement)	-	0	-
31(Resistance to Rusting)	-	0	-
30.2(Needle Flame Test)	-	0	-
30.2(Glow Wire Test)	-	0	-
30.1(Ball pressure test)	-	0	-
29(clearance, creepage distances and solid insulation)	-	0	-
28(Screw test and connections)	-	0	-
27.1(Provision for Earthing, IS 302-1)	-	0	-
26(Terminals for external conductors)	-	0	-
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
23.1(Internal Wiring, IS 302-1)	-	0	-
22.1(Construction, IS 302-1)	-	0	-
21.1(Mechanical Strength, IS 302-1)	-	0	-
20.1(Stability & Mechanical Hazards, IS 302-1)	-	0	-
19(Abnormal Operation)	-	0	-
18(Endurance)	-	0	-
17(Over Load Protection of Transformers and associated circuits)	-	0	-
16.3(Electric Strength (after clause 15 and 16.2))	-	0	-
16.2(Leakage Current (after Clause 15))	-	0	-
16.1(General)	-	0	-
16.0(General)	-	0	-
15.3(Humidity Test)	-	0	-
15.1(Ingress Protection test other than IPX0 (IP test))	-	0	-
15.0(Moisture resistance)	-	0	-
14(Transient Over Voltages)	-	0	-
13.3(Electric Strength at operating temperature)	-	0	-
13.2(Leakage current at operating temperature)	-	0	-
13(Leakage current and electric strength at operating temperature)	-	0	-
11.3(Heating)	-	0	-
11.2(General)	-	0	-
11.1(General)	-	0	-
10.2(Current input)	-	0	-
10.1(Power input)	-	0	-
9(Starting of motor operation test requirements and tests)	-	0	-
8.1.4(Protection against live parts against protective impedance)	-	0	-
8.1.3(Protection against live parts in visible glowing heating elements)	-	0	-
8.1.2(Protection against live parts in openings)	-	0	-
8.1.1(Protection against live parts in all positions)	-	0	-
7(Marking and instructions)	-	0	-
A.2(Earth continuity test)	-	0	-
Annex C(Ageing test on motors)	-	0	-
Annex D(Thermal motor protectors)	-	0	-
19.17(Abnormal Operation, IS 302-1)	-	0	-
20.2(Stability & Mechanical Hazards, IS 302-1)	-	0	-
21.2(Mechanical Strength, IS 302-1)	-	0	-
21.3(Mechanical Strength, IS 302-1)	-	0	-
22.5(Construction)	-	0	-
22.6(Construction, IS 302-1)	-	0	-
22.11(Construction, IS 302-1)	-	0	-
22.16(Construction)	-	0	-
22.32(Construction, IS 302-1)	-	0	-
22.42(Construction)	-	0	-
23.3(Internal Wiring, IS 302-1)	-	0	-
25.6(Supply connection and external flexible cords, IS 302-1)	-	0	-
25.7(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
26.5(Terminals for external conductors)	-	0	-
27.5(Provision for Earthing, IS 302-1)	-	0	-
28.1(Screws and connections)	-	0	-
22.2(Construction, IS 302-1)	-	0	-
22.3(Construction, IS 302-1)	-	0	-
B.22.4(Construction, IS 302-1)	-	0	-
B.22.5(Construction, IS 302-1)	-	0	-
15.2(Spillage Test)	-	0	-
15.2(Moisture resistance)	-	0	-
12(Charging of metal-ion batteries)	-	0	-
6(Classification- IS 302-1)	-	0	-
5(General conditions for the tests)	-	0	-
11.8(Temperature rise)	-	0	-
11.7(Duration corresponding)	-	0	-
11.6(Combined appliances)	-	0	-
11.5(Motor-operated appliances)	-	0	-
11.4(Heating appliances)	-	0	-
8.1.5(Live parts of built-in appliances)	-	0	-
18(Endurance)	-	0	-
17(Overload protection of transformers and associated circuits)	-	0	-
16(Leakage current and electric strength)	-	0	-
4(General requirement)	-	0	-
31(Resistance to Rusting)	-	0	-
30.2(Needle Flame Test)	-	0	-
30.2(Glow Wire Test)	-	0	-
30.1(Ball pressure test)	-	0	-
29(clearance, creepage distances and solid insulation)	-	0	-
28(Screw test and connections)	-	0	-
27.1(Provision for Earthing, IS 302-1)	-	0	-
26(Terminals for external conductors)	-	0	-
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
23.1(Internal Wiring, IS 302-1)	-	0	-
22.1(Construction, IS 302-1)	-	0	-
21.1(Mechanical Strength, IS 302-1)	-	0	-
20.1(Stability & Mechanical Hazards, IS 302-1)	-	0	-
19(Abnormal Operation)	-	0	-
18(Endurance)	-	0	-
17(Over Load Protection of Transformers and associated circuits)	-	0	-
16.3(Electric Strength (after clause 15 and 16.2))	-	0	-
16.2(Leakage Current (after Clause 15))	-	0	-
16.1(General)	-	0	-
16.0(General)	-	0	-
15.3(Humidity Test)	-	0	-
15.1(Ingress Protection test other than IPX0 (IP test))	-	0	-
15.0(Moisture resistance)	-	0	-
14(Transient Over Voltages)	-	0	-
13.3(Electric Strength at operating temperature)	-	0	-
13.2(Leakage current at operating temperature)	-	0	-
13(Leakage current and electric strength at operating temperature)	-	0	-
11.3(Heating)	-	0	-
11.2(General)	-	0	-
11.1(General)	-	0	-
10.2(Current input)	-	0	-
10.1(Power input)	-	0	-
9(Starting of motor operation test requirements and tests)	-	0	-
8.1.4(Protection against live parts against protective impedance)	-	0	-
8.1.3(Protection against live parts in visible glowing heating elements)	-	0	-
8.1.2(Protection against live parts in openings)	-	0	-
8.1.1(Protection against live parts in all positions)	-	0	-
7(Marking and instructions)	-	0	-
A.2(Earth continuity test)	-	0	-
Annex C(Ageing test on motors)	-	0	-
Annex D(Thermal motor protectors)	-	0	-
19.17(Abnormal Operation, IS 302-1)	-	0	-
20.2(Stability & Mechanical Hazards, IS 302-1)	-	0	-
21.2(Mechanical Strength, IS 302-1)	-	0	-
21.3(Mechanical Strength, IS 302-1)	-	0	-
22.5(Construction)	-	0	-
22.6(Construction, IS 302-1)	-	0	-
22.11(Construction, IS 302-1)	-	0	-
22.16(Construction)	-	0	-
22.32(Construction, IS 302-1)	-	0	-
22.42(Construction)	-	0	-
23.3(Internal Wiring, IS 302-1)	-	0	-
25.6(Supply connection and external flexible cords, IS 302-1)	-	0	-
25.7(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
26.5(Terminals for external conductors)	-	0	-
27.5(Provision for Earthing, IS 302-1)	-	0	-
28.1(Screws and connections)	-	0	-
22.2(Construction, IS 302-1)	-	0	-
22.3(Construction, IS 302-1)	-	0	-
B.22.4(Construction, IS 302-1)	-	0	-
B.22.5(Construction, IS 302-1)	-	0	-
15.2(Spillage Test)	-	0	-
15.2(Moisture resistance)	-	0	-
12(Charging of metal-ion batteries)	-	-	-
6(Classification- IS 302-1)	-	-	-
5(General conditions for the tests)	-	-	-
11.8(Temperature rise)	-	-	-
11.7(Duration corresponding)	-	-	-
11.6(Combined appliances)	-	-	-
11.5(Motor-operated appliances)	-	-	-
11.4(Heating appliances)	-	-	-
8.1.5(Live parts of built-in appliances)	-	-	-
18(Endurance)	-	-	-
17(Overload protection of transformers and associated circuits)	-	-	-
16(Leakage current and electric strength)	-	-	-
4(General requirement)	-	-	-
31(Resistance to Rusting)	-	-	-
30.2(Needle Flame Test)	-	-	-
30.2(Glow Wire Test)	-	-	-
30.1(Ball pressure test)	-	-	-
29(clearance, creepage distances and solid insulation)	-	-	-
28(Screw test and connections)	-	-	-
27.1(Provision for Earthing, IS 302-1)	-	-	-
26(Terminals for external conductors)	-	-	-
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	-	-
23.1(Internal Wiring, IS 302-1)	-	-	-
22.1(Construction, IS 302-1)	-	-	-
21.1(Mechanical Strength, IS 302-1)	-	-	-
20.1(Stability & Mechanical Hazards, IS 302-1)	-	-	-
19(Abnormal Operation)	-	-	-
18(Endurance)	-	-	-
17(Over Load Protection of Transformers and associated circuits)	-	-	-
16.3(Electric Strength (after clause 15 and 16.2))	-	-	-
16.2(Leakage Current (after Clause 15))	-	-	-
16.1(General)	-	-	-
16.0(General)	-	-	-
15.3(Humidity Test)	-	-	-
15.1(Ingress Protection test other than IPX0 (IP test))	-	-	-
15.0(Moisture resistance)	-	-	-
14(Transient Over Voltages)	-	-	-
13.3(Electric Strength at operating temperature)	-	-	-
13.2(Leakage current at operating temperature)	-	-	-
13(Leakage current and electric strength at operating temperature)	-	-	-
11.3(Heating)	-	-	-
11.2(General)	-	-	-
11.1(General)	-	-	-
10.2(Current input)	-	-	-
10.1(Power input)	-	-	-
9(Starting of motor operation test requirements and tests)	-	-	-
8.1.4(Protection against live parts against protective impedance)	-	-	-
8.1.3(Protection against live parts in visible glowing heating elements)	-	-	-
8.1.2(Protection against live parts in openings)	-	-	-
8.1.1(Protection against live parts in all positions)	-	-	-
7(Marking and instructions)	-	-	-
A.2(Earth continuity test)	-	-	-
Annex C(Ageing test on motors)	-	-	-
Annex D(Thermal motor protectors)	-	-	-
19.17(Abnormal Operation, IS 302-1)	-	-	-
20.2(Stability & Mechanical Hazards, IS 302-1)	-	-	-
21.2(Mechanical Strength, IS 302-1)	-	-	-
21.3(Mechanical Strength, IS 302-1)	-	-	-
22.5(Construction)	-	-	-
22.6(Construction, IS 302-1)	-	-	-
22.11(Construction, IS 302-1)	-	-	-
22.16(Construction)	-	-	-
22.32(Construction, IS 302-1)	-	-	-
22.42(Construction)	-	-	-
23.3(Internal Wiring, IS 302-1)	-	-	-
25.6(Supply connection and external flexible cords, IS 302-1)	-	-	-
25.7(Supply Connection and External Flexible Cords, IS 302-1)	-	-	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	-	-
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	-	-
26.5(Terminals for external conductors)	-	-	-
27.5(Provision for Earthing, IS 302-1)	-	-	-
28.1(Screws and connections)	-	-	-
22.2(Construction, IS 302-1)	-	-	-
22.3(Construction, IS 302-1)	-	-	-
B.22.4(Construction, IS 302-1)	-	-	-
B.22.5(Construction, IS 302-1)	-	-	-
15.2(Spillage Test)	-	-	-
15.2(Moisture resistance)	-	-	-

03 Oct, 2027

-
Included w.e.f 02.09.2025 Cl 19.11.4.1-19.11.4.7(EMI/EMC), Cl 24 (Components), Cl 32 (Radiation Toxicity and Similar Hazards) "Domestic Electric Clothes Washing Machines (For testing charges please refer part 2 standard in LIMS)"

2928

SHRI KRISHNA TEST HOUSE PVT LTD (142)

8185606

IS 17569 (2021)

Insulated Containers for Food Storage — Specification

ALL

28000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Manufacture and Workmanship)	-	28000	-
5.3(Manufacture and Workmanship)	-	28000	-
7.1(Material)	-	28000	-
7.1.2(Thickness)	-	28000	-
7.1.2.1(Requirements and Tests(Material) – Outer Protective Case and Accessories – Lead)	-	28000	-
7.1.2.1(Requirements and Tests(Material) – Outer Protective Case and Accessories – Cadmium)	-	28000	-
7.1.2.8(Bisphenol A(BPA))	-	28000	-
7.3(Capacity)	-	28000	-
7.4(Heat Retention Capability)	-	28000	-
7.5(Cold Retention Capability)	-	28000	-
7.6.1(Drop Impact Test)	-	28000	-
7.6.2(Pendulum Impact Test)	-	28000	-
7.7(Fixing Strength of the Handle)	-	28000	-
7.8(Test for Strength of Shoulder Strap)	-	28000	-
7.9(Leakage Test)	-	28000	-
7.10(Joint Leak Test)	-	28000	-
7.11(Staining Test)	-	28000	-
7.12("Check for PUF (Polyurethane Foam) or any Other Similar Thermal Insulation Material ")	-	28000	-
7.13.1(Length of the Shoulder Strap)	-	28000	-
7.13.2(Stability of Insulated Container)	-	28000	-
7.13.3(Cleaning)	-	28000	-
7.14(Seepage Test)	-	28000	-
9.1(Marking)	-	28000	-
9.2(BIS certification marking)	-	28000	-
10(Packaging)	-	28000	-
CLAUSE 5.2(Welding Defects)	-	28000	-
CLAUSE 7.1(Materials)	-	28000	-
CLAUSE 7.1.2.2(Thickness of plastic)	-	28000	-
"CLAUSE 7.1.2.1 "(Minimum Thickness of Outer Container)	-	28000	-
"CLAUSE 7.1.2.1 "(Coating Thickness)	-	28000	-
"CLAUSE 7.1.2.1 "(Salt Water Corrosion Test)	-	28000	-
CLAUSE 7.1.2.1(Adhesion Test)	-	28000	-
CLAUSE 7.1.2.1(Lead Limit)	-	28000	-
CLAUSE 7.1.2.1(Cadmium Limit)	-	28000	-
CLAUSE 7.1.2.3(Outer container or lid - thickness)	-	28000	-
CLAUSE 7.3(Capacity)	-	28000	-
CLAUSE 7.4(Heat Retention Capability)	-	28000	-
CLAUSE 7.5(Cold Retention Capability)	-	28000	-
CLAUSE 7.6.1(Drop Impact)	-	28000	-
CLAUSE 7.6.2(Pendulum Impact)	-	28000	-
CLAUSE 7.7(Fixing Strength of Handle)	-	28000	-
CLAUSE 7.8(Test for Strength of Shoulder Strap)	-	28000	-
CLAUSE 7.9(Leakage Test)	-	28000	-
CLAUSE 7.10(Joint Leak Test)	-	28000	-
CLAUSE 7.11(Staining Test)	-	28000	-
CLAUSE 7.12(Checking of PUF insulation)	-	28000	-
CLAUSE 7.13.1(Length of the Shoulder Strap)	-	28000	-
CLAUSE 7.13.2(Stability of Flask)	-	28000	-
CLAUSE 7.1.1(Material - inner container)	-	28000	-
C 7.1.1 Note Annex C(Test for leaching of food grade stainless steel)	-	28000	-
CL 7.1.1 Note- Annex D(Sensational test method)	-	28000	-
Cl 7.1.2.2(Polymer - test for BPA)	-	28000	-
Cl 7.1.2.4(Silicon gasket - overall migration)	-	28000	-
Cl 7.1.2.4(Silicon gasket - defects)	-	28000	-
Cl 7.1.2.5(Performance requirement for glass lid - Fragmentation test (Cl 8.15.1 of IS 2347))	-	28000	-
Cl 7.1.2.5(Performance requirement for glass lid - Ball drop test (Cl 8.15.2 of IS 2347))	-	28000	-
Cl 7.1.2.5(Performance requirement for glass lid - Thermal shock test (Cl 8.15.3 of IS 2347))	-	28000	-
Cl 7.1.2.5(Performance requirement for glass lid - Free fall test (Cl 8.15.4 of IS 2347))	-	28000	-
Cl 7.1.2.5(Thickness of steel rim)	-	28000	-
Cl 7.1.2.5(Thickness of glass lid)	-	28000	-
Cl 7.1.2.6(Thermal insulating material)	-	28000	-
Cl 7.1.2.7(Additional lid)	-	28000	-
Cl 7.1.2.8(Hot/Cold Box - thickness)	-	28000	-
Cl 7.1.2.9(Internal utensils- material)	-	28000	-
Cl 7.1.2.9(Internal utensils- thickness)	-	28000	-
Cl 7.1.2.9(Internal utensils - thickness of plastic lid)	-	28000	-
Cl 7.1.2.9(Test for BPA)	-	28000	-
CLAUSE 7.1.2.3(Outer container or lid - material)	-	28000	-

13 May, 2028

-
Included w.e.f 10.06.2025

2929

BIS, Central Laboratory (CL)

None

IS 10116 (2015)

Boric acid - Specification (First Revision)

Please see remarks View breakup
Testing Charge for Boric Acid- a) Special Quality (SQ) Grade= 13.25x300+10x9+700 =Rs. 4765/-= Rs. 4800/- (Rounded off) Testing Charge for Boric Acid- b) Technical (TECH) Grade= 5.25x300+9x9+300 =Rs. 1956/-= Rs. 2000/- (Rounded off) Testing Charge for Boric Acid- c) Explosive Grade= 6.25x300+9x9+350 =Rs. 2306/-= Rs. 2300/- (Rounded off)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.2, 4.3, 4.4, Table 1 (Boric acid (as H3BO3 ))	-
4.2, 4.3, 4.4, Table 1 (Moisture)	-
4.2, 4.3, 4.4, Table 1 (Water insoluble matter)	-
4.2, 4.3, 4.4, Table 1 (Heavy metals (as Pb))	-
4.2, 4.3, 4.4, Table 1 (Iron (as Fe))	-
4.2, 4.3, 4.4, Table 1 (Ca)	-
4.2, 4.3, 4.4, Table 1 (As)	-
4.2, 4.3, 4.4, Table 1 (Na)	-
4.2, 4.3, 4.4, Table 1 (Cl)	-
4.2, 4.3, 4.4, Table 1 (Sulphate (as SO4 ))	-
4.2, 4.3, 4.4, Table 1 (Phosphate (PO4 ))	-
4.5 (Additional Requirement for Technical Grade Boric Acid)	-
4.6 (Boric Acid for Use in Explosives)	-

-
GRADE OF BORIC ACID AS PER CL. 3 OF IS 10116 MAY BE DECLARED

2930

ALPHA TEST HOUSE SERVICES LLP (Unit-1), MOHALI

9184906

IS 2095 : Part 1 (2023)

Gypsum Plaster Boards Specification Part 1 Plain Gypsum Plaster Boards

all

42500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause. 5.0(CaSO4.2H2O)	-	42500	-
Clause. 5.0(Free water (Natural / By -product))	-	42500	-
Clause. 5.0(pHvalue (Natural / By -product))	-	42500	-
Clause. 5.0(SiO2)	-	42500	-
Clause. 5.0(Chloride content)	-	42500	-
Clause. 6.0(Manufacturing)	-	42500	-
Clause. 7.0(Dimensions)	-	42500	-
Clause. 7.0(Tolerances)	-	42500	-
Clause. 7.0(Density)	-	42500	-
Clause. 7.0(Flexural Breaking Load)	-	42500	-
Clause. 7.0(Impact Resistance)	-	42500	-
Clause. 7.0(Surface Hardness)	-	42500	-
Clause. 7.0(Loading Capability)	-	42500	-
Clause. 7.0(Water Absorption)	-	42500	-
Clause. 7.0(Finish)	-	42500	-
Cl-5.3(Paper Liner)	-	42500	-
Clause 7.1(Dimensions)	-	42500	-
(Clause 7.2)(Density)	-	42500	-
(Clause 7.3)(Flexural Load)	-	42500	-
(Clause 7.4)(Impact Resistance)	-	42500	-
(Clause 7.5)(Surface Hardness)	-	42500	-
(Clause 7.6)(Loading Capability)	-	42500	-
(Clause 7.7)(Water Absorption)	-	42500	-

25 Apr, 2028

-
Included w.e.f 19.06.2025 Exclusion: (Clause 7.8) (Fire Resistance)

2931

SHRI KRISHNA TEST HOUSE PVT LTD (142)

8185606

IS 2347 (2023)

DOMESTIC PRESSURE COOKER ï¿½ SPECIFICATION

All

36000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Gross capacity)	-	36000	-
4.2(Body Capacity)	-	36000	-
5.1(Body, Lid, Containers and Grid)	-	36000	-
5.1.2(Body and Lid )	-	36000	-
5.1.3(Stainless steel pressure cooker)	-	36000	-
5.1.4(Aluminium cooker )	-	36000	-
5.2(Safety Relief Device)	-	36000	-
5.3(Gasket)	-	36000	-
5.4(Handles and Knobs)	-	36000	-
5.5(Pressure Regulating Device )	-	36000	-
5.6(Vent Seal Pin for Pressure Regulating Device )	-	36000	-
5.7(Vent Pipe )	-	36000	-
5.8(Vent Pipe Nut )	-	36000	-
5.9(Spring )	-	36000	-
5.1(Material of Rim )	-	36000	-
5.11(Visual Pressure Indicator)	-	36000	-
5.12(Gasket Release System)	-	36000	-
6(Construction)	-	36000	-
7(Workmanship and Finish )	-	36000	-
8.1(Air Pressure Test )	-	36000	-
8.2(Proof Pressure Test )	-	36000	-
8.3(Operating Test for Pressure Regulating Device )	-	36000	-
8.4(Test for Safety Relief Device )	-	36000	-
8.5(Bursting Pressure Test )	-	36000	-
8.6(Test for Removal of Lid under Pressure )	-	36000	-
8.7(Test for Spring Loaded Mechanism )	-	36000	-
8.8(Composite Cooker Base )	-	36000	-
8.9(Aluminium induction compatible Base )	-	36000	-
8.1(Handles of cooker )	-	36000	-
8.11(External Coating)	-	36000	-
8.12(Internal Coating )	-	36000	-
8.13(Integral electrical heating)	-	36000	-
8.14(Ply construction cooker Body )	-	36000	-
8.15.1(Fragmentation Test )	-	36000	-
8.15.2(Ball Drop Test )	-	36000	-
8.15.3(Thermal Shock Test )	-	36000	-
8.15.4(Free Fall Test)	-	36000	-
8.17(Test for Effectiveness for Induction Bottom)	-	36000	-
11(Marking )	-	36000	-
12(Packing )	-	36000	-
4(Capacity)	-	36000	-
4.2(Body Capacity)	-	36000	-
5.1.1(Body, Lid, Containers and Grid)	-	36000	-
5.1.2(Body, Lid, Containers and Grid)	-	36000	-
5.1.3(Body, Lid, Containers and Grid)	-	36000	-
5.1.4(Body, Lid, Containers and Grid)	-	36000	-
5.1.5(Body, Lid, Containers and Grid)	-	36000	-
5.2.1(Destructive Type Safety Relief Device)	-	36000	-
5.2.2(Resettable Type Safety Relief Device)	-	36000	-
5.3(Gasket)	-	36000	-
5.4(Handles and Knobs)	-	36000	-
5.5(Pressure Regulating Device)	-	36000	-
5.6(Vent Seal Pin for Pressure Regulating Device)	-	36000	-
5.7(Vent Pipe)	-	36000	-
5.8(Vent Pipe Nut)	-	36000	-
5.9(Spring)	-	36000	-
5.10(Spring)	-	36000	-
5.11(Visual Pressure Indicator)	-	36000	-
5.12(Gasket Release System)	-	36000	-
6(CONSTRUCTION)	-	36000	-
6.1(Pressure Regulating Device)	-	36000	-
6.1.1(Pressure Regulating Device)	-	36000	-
6.1.1(Minimum Inside diameter of Vent Pipe.)	-	36000	-
6.1.2(Pressure Regulating Device)	-	36000	-
6.1.3(Pressure Regulating Device)	-	36000	-
6.1.4(Pressure Regulating Device)	-	36000	-
6.1.5(Pressure Regulating Device)	-	36000	-
6.1.6(Pressure Regulating Device)	-	36000	-
6.2(Safety Relief Device)	-	36000	-
6.2.1(Safety Relief Device)	-	36000	-
6.2.2(Safety Relief Device)	-	36000	-
6.2.3(Safety Relief Device)	-	36000	-
6.3.1(Temperature Responsive Safety Relief Device)	-	36000	-
6.3.2(Temperature Responsive Safety Relief Device)	-	36000	-
6.3.3(Temperature Responsive Safety Relief Device)	-	36000	-
6.4.1(Handles and Knobs)	-	36000	-
6.4.1.1(Handles and Knobs)	-	36000	-
6.4.2(Handles and Knobs)	-	36000	-
6.4.2.1(Handles and Knobs)	-	36000	-
6.5(CONSTRUCTION)	-	36000	-
6.6(CONSTRUCTION)	-	36000	-
6.7(Internal Level Marking)	-	36000	-
6.8(Internal Level Marking)	-	36000	-
7.1(WORKMANSHIP AND FINISH)	-	36000	-
7.2(WORKMANSHIP AND FINISH)	-	36000	-
8.17(Test for Effectiveness for Induction Bottom)	-	36000	-
8.16(PRD with chain)	-	36000	-
8.15.4.2(Glass lid without rim)	-	36000	-
8.15.4.1("Free Fall Test ( Glass lid with rim) ")	-	36000	-
8.15.3(Thermal Shock Test on Tempered Glass lid)	-	36000	-
8.15.2(Ball Drop Test on Tempered Glass lid)	-	36000	-
8.15.1(Fragmentation Test on Tempered Glass lid)	-	36000	-
8.14(3 ply construction cooker body)	-	36000	-
8.13(Pressure cooker with integral electrical heating)	-	36000	-
8.12(Internal Coating)	-	36000	-
7.3(WORKMANSHIP AND FINISH)	-	36000	-
7.4(WORKMANSHIP AND FINISH)	-	36000	-
8.1(Air Pressure Test)	-	36000	-
8.2(Proof Pressure Test)	-	36000	-
8.3.1(Operating Test for Pressure Regulating Device)	-	36000	-
8.4.1(Test for Safety Relief Device)	-	36000	-
8.4.2(Test for Safety Relief Device)	-	36000	-
8.4.2 NOTE(Test for Safety Relief Device)	-	36000	-
8.5(Bursting Pressure Test)	-	36000	-
8.6.1(Tests for Removal of Lid under Pressure For Outer Lid Cooker)	-	36000	-
8.6.2(Tests for Removal of Lid under Pressure For inner Lid Cooker)	-	36000	-
8.6.3(Tests for Removal of Lid under Pressure: For Cooker Fastened by Screw Clamps or Any Other Locking Device)	-	36000	-
8.6.4(Tests for Removal of Lid under Pressure in case of electrical pressure cooker)	-	36000	-
8.7(Test for Spring Loaded Mechanism)	-	36000	-
8.8(Test for stainless steel cookers)	-	36000	-
8.9("For stainless steel, aluminium induction compatible base and 3 ply cooker")	-	36000	-
8.10(Testing of Handles of the cooker)	-	36000	-
8.10 Note 3(Testing of Handles of the cooker)	-	36000	-
8.10 Note 4(Testing of Handles of the cooker)	-	36000	-
8.10 Note 5(Testing of Handles of the cooker)	-	36000	-
8.10 Note 6(Testing of Handles of the cooker)	-	36000	-
8.10.1(Testing of Handles of the cooker)	-	36000	-
8.11.1(External Coating)	-	36000	-

13 May, 2028

-
Included w.e.f 06.06.2025

2932

Central Institute of Petrochemicals Engineering & Technology (CIPET), CSTS - Dehradun

9178004

IS 15909 (2020)

PVC Geomembranes for Lining - Specification ( Second Revision )

53700.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.0(Types)	-	500.00	-
5,Table 1(Requirements)	-	0.00	-
5,Table 1(Length )	-	500	-
5,Table 1(Width )	-	0.00	-
5,Table 1(Thickness)	-	500.00	-
5,Table 1(Specific Gravity)	-	700.00	-
5,Table 1( Tensile strength (Longitudinal) ,kg/m2)	-	1800.00	-
5,Table 1(Elongation at break (Longitudinal),250 % ,Min)	-	0.00	-
5,Table 1( Tensile strength (Transverse) ,kg/m2)	-	1300.00	-
5,Table 1(Elongation at break (Transverse),250 % ,Min)	-	0.00	-
5,Table 1(Tear resistance (machine direction))	-	1600.00	-
5,Table 1(Tear resistance (Cross direction))	-	1100.00	-
5,Table 1(Index puncture resistance,N)	-	1100.00	-
5,Table 1(Low temperature crack resistance)	-	1600.00	-
5,Table 1(Hydrostatic resistance,kg/cm2,Min)	-	1000.00	-
5,Table 1(Seam strength,kg,Min)	-	1100.00	-
5,Table 1(Volatile Loss ,% ,Max)	-	700.00	-
5,Table 1(Peel strength,kN/m,Min)	-	1100.00	-
5,Table 1(Tensile strength (Longitudinal),% change)	-	7800.00	-
5,Table 1(Elongation at break (Longitudinal),% change)	-	0.00	-
5,Table 1(Tensile strength (Transverse),% change)	-	0.00	-
5,Table 1(Elongation at break (Transverse),% change)	-	0.00	-
5,Table 1(Water extraction,% loss in weight)	-	600.00	-
5,Table 1(Stability to ultraviolet radiations,% retension in Tensile strength)	-	28800.00	-
5,Table 1(Stability to ultraviolet radiations,% retension in Elongation at break)	-	0.00	-
6.0(Dimensions and tolerances)	-	0.00	-
5, Table-2(Length)	-	0.00	-
5, Table-2(Width)	-	0.00	-
5, Table-2(Thickness at 20kPa pressure)	-	0.00	-
5, Table-2(Tensile Strength (Longitudinal))	-	0.00	-
5, Table-2(Tensile Strength (Transverse))	-	0.00	-
5, Table-2(Elongation at break (Longitudinal))	-	0.00	-
5, Table-2(Elongation at break (Transverse))	-	0.00	-
5, Table-2(Tear Strength (Machine direction))	-	0.00	-
5, Table-2(Tear Strength (Cross direction))	-	0.00	-
5, Table-2(Behaviour during perforation)	-	0.00	-
5, Table-2(Height of fall without perforation)	-	0.00	-
5, Table-2(Cold crack resistance at low temperature)	-	0.00	-
5, Table-2(Hydrostatic Pressure Resistance)	-	0.00	-
5, Table-2(Dimensional Stability at 80 degree C)	-	0.00	-
5, Table-2(Change in length after heating)	-	0.00	-
5, Table-2(Change in width after heating)	-	0.00	-
5, Table-2(Resistance to acid and alkali)	-	0.00	-
5, Table-2(Strength of welded seam shear resistance)	-	0.00	-
5, Table-2(Resistance to static puncturing)	-	0.00	-
5, Table-2(Horizontal rate of burning)	-	0.00	-
5, Table-2(Vertical rate of burning)	-	0.00	-
7.0(Colour ,Surface characteristics and fredom from defects)	-	0.00	-
7.1(Colour ,Surface characteristics and fredom from defects)	-	0.00	-
7.2(Colour ,Surface characteristics and fredom from defects)	-	0.00	-
5,Table 2(Specific Gravity)	-	0.00	-

24 Apr, 2027

-
Included w.e.f 06.06.2025 Exclusion: Cl 5,Table 1 (Resistance to soil burial)

2933

MSME TESTING CENTRE, CHENNAI

6106704

IS 5557 : Part 1 (2024)

All Rubber Gum Boots and Ankle Boots Part 1 Safety and Protective

10900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5(Design)	-	0	-
6(Sizes and Fittines)	-	0	-
7(Consturction)	-	0	-
8.1(Lining Material)	-	0	-
8.2, Table-1 (i)(Width, mm, Min)	-	100	-
8.2, Table-1 (ii)(Breaking load, N, Min (50 cm grip length test specimen))	-	400	-
8.3, Table-2 (i)(Sewing thread for piping/binding")	-	300	-
8.4(Use of Rubber material)	-	0	-
8.4.1, Table-3 (i)(Hardness, (IRHD))	-	300	-
8.4.1, Table-3 (ii)(Change in hardness after accelerated ageing at 100 ⁰C ± 2 ⁰C for 24 h)	-	400	-
8.5(Upper material)	-	0	-
8.5.1(Tensile Strength of upper)	-	400	-
8.5.2(Thickness)	-	100	-
8.5.3(Flexing Resistance)	-	400	-
8.5.4(Abrasion Resistance)	-	500	-
8.6.1(Thickness of Outsole)	-	100	-
8.6.2(Tear Strength)	-	400	-
8.6.3(Abrasion Resistance of Outsole)	-	400	-
8.6.4(Flexing Resistance)	-	400	-
8.6.5(Inter layer Bond Strength of outsole)	-	400	-
Cl-8.7(Insocks material)	-	0	-
8.7.1(Thickness of Insocks)	-	100	-
Cl-8.7.2(Abrasion Resistance of Insock)	-	500	-
Cl-8.8.1(Outsole/Heel)	-	400	-
Cl-8.9(Leak Proof Test)	-	400	-
8.10(Height of Upper)	-	100	-
8.11(Adhesion Test for Rubberized Textile Upper)	-	400	-
Cl-8.12(Upper Outsole Bond Strength)	-	400	-
Cl-8.13(Internal Length of Toe Cap)	-	100	-
Cl-8.14(Impact Resistance of Safety Footwear)	-	300	-
Cl-8.15(Compression Resistance of Safety Footwear)	-	300	-
8.17(Ceramic Tile Floor with sodium lauryl sulphate (NaLS))	-	300	-
8.17(Steel Floor with Glycerine)	-	300	-
8.18(Corrosion Resistant Test for Toe Caps)	-	300	-
9.1(Penetration Resistance)	-	300	-
9.2(Antistatic Footwear)	-	500	-
9.3(Flame Resistance Property)	-	200	-
9.4(Electrical Resistance)	-	500	-
9.5(Resistance to Acid and Alkali- Limited contact with chemicals),)	-	300	-
9.5(Resistance to Acid and Alkali- Prolonged contact with chemicals)	-	300	-
9.6(Resistance to Fuel Oil)	-	300	-
11.2(Marking)	-	0	-
Cl-5(Design)	-	0	-
6(Sizes and Fittines)	-	0	-
7(Consturction)	-	0	-
8.1(Lining Material)	-	0	-
8.2, Table-1 (i)(Width, mm, Min)	-	0	-
8.2, Table-1 (ii)(Breaking load, N, Min (50 cm grip length test specimen))	-	0	-
8.3, Table-2 (i)(Sewing thread for piping/binding")	-	0	-
8.4(Use of Rubber material)	-	0	-
8.4.1, Table-3 (i)(Hardness, (IRHD))	-	0	-
8.4.1, Table-3 (ii)(Change in hardness after accelerated ageing at 100 ⁰C ± 2 ⁰C for 24 h)	-	0	-
8.5(Upper material)	-	0	-
8.5.1(Tensile Strength of upper)	-	0	-
8.5.2(Thickness)	-	0	-
8.5.3(Flexing Resistance)	-	0	-
8.5.4(Abrasion Resistance)	-	0	-
8.6.1(Thickness of Outsole)	-	0	-
8.6.2(Tear Strength)	-	0	-
8.6.3(Abrasion Resistance of Outsole)	-	0	-
8.6.4(Flexing Resistance)	-	0	-
8.6.5(Inter layer Bond Strength of outsole)	-	0	-
Cl-8.7(Insocks material)	-	0	-
8.7.1(Thickness of Insocks)	-	0	-
Cl-8.7.2(Abrasion Resistance of Insock)	-	0	-
Cl-8.8.1(Outsole/Heel)	-	0	-
Cl-8.9(Leak Proof Test)	-	0	-
8.10(Height of Upper)	-	0	-
8.11(Adhesion Test for Rubberized Textile Upper)	-	0	-
Cl-8.12(Upper Outsole Bond Strength)	-	0	-
Cl-8.13(Internal Length of Toe Cap)	-	0	-
Cl-8.14(Impact Resistance of Safety Footwear)	-	0	-
Cl-8.15(Compression Resistance of Safety Footwear)	-	0	-
8.17(Ceramic Tile Floor with sodium lauryl sulphate (NaLS))	-	0	-
8.17(Steel Floor with Glycerine)	-	0	-
8.18(Corrosion Resistant Test for Toe Caps)	-	0	-
9.1(Penetration Resistance)	-	0	-
9.2(Antistatic Footwear)	-	0	-
9.4(Electrical Resistance)	-	0	-
9.5(Resistance to Acid and Alkali- Limited contact with chemicals),)	-	0	-
9.5(Resistance to Acid and Alkali- Prolonged contact with chemicals)	-	0	-
9.6(Resistance to Fuel Oil)	-	0	-
11.2(Marking)	-	0	-

31 Dec, 2026

-
Included w.e.f.18.08.2025 Exclusion Cl 8.16 (Banned Chemicals) Cl 9.3 (Flame Resistance Property)

2934

ALPHA TEST HOUSE PVT LTD, BAHADURGARH

8185306

IS 374 (2019)

Specification for electric ceiling type fans and regulators (Third Revision)

212200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	32200	Extra EMI/EMC charges: 1,80,000
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	32200	Extra EMI/EMC charges: 1,80,000
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	32200	Extra EMI/EMC charges: 1,80,000
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	32200	Extra EMI/EMC charges: 1,80,000
8.1(Marking (as per Cl. 7 of IS 302-2-80:2017))	-	32200	Extra EMI/EMC charges: 1,80,000
8.1,a(Marking )	-	32200	Extra EMI/EMC charges: 1,80,000
8.1,b(Marking )	-	32200	-
8.1,c(Marking )	-	32200	-
8.1,d(Marking )	-	32200	-
8.1,e(Marking )	-	32200	-
8.1,f(Marking )	-	32200	-
8.1,g(Marking )	-	32200	-
8.2(Marking )	-	32200	-
8.3,a(Marking )	-	32200	-
8.3,b(Marking )	-	32200	-
8.3,c(Marking )	-	32200	-
8.3,d(Marking )	-	32200	-
8.3,e(Marking )	-	32200	-
8.4(Marking )	-	32200	-
8(Marking (as per Cl. 7.1 of IS 302-2-80:2017))	-	32200	-
8(Marking (as per Cl. 7 of IS 302-2-80:2017, Cl.7.1 (f) of IS 302-1:2008))	-	32200	-
8(Marking (as per Cl. 7 of IS 302-2-80:2017, Cl.7.1(g) of IS 302-1:2008))	-	32200	-
8(Marking (as per Cl.7.12.1(a) of IS 302-2-80:2017))	-	32200	-
6.2(Rating)	-	32200	-
9(Protection against access to live parts (as per Cl.8 of IS 302-2-80 :2017))	-	32200	-
9(Power Input & current (as per Cl.10 of IS 302-2-80 :2017))	-	32200	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	32200	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	32200	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	32200	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	32200	-
9(Leakage current and Electric strength at operating temperature (as per Cl.13 of IS 302-2-80 :2017))	-	32200	-
9(Leakage current and Electric strength at operating temperature (as per Cl.13 of IS 302-2-80 :2017))	-	32200	-
9(Transient over Voltage (as per Cl.14 of IS 302-2-80 :2017))	-	32200	-
9(Moisture Resistance (After Humidity test) (as per Cl.15 & Cl.16 of IS 302-2-80 :2017) )	-	32200	-
9(Moisture Resistance (After Humidity test) (as per Cl.15 & Cl.16 of IS 302-2-80 :2017) )	-	32200	-
9(Overload protection of transformers and associated circuits (as per Cl.17 of IS 302-2-80 :2017))	-	32200	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	32200	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	32200	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	32200	-
9(Staibilty and mechanical hazards (as per Cl.20.102, Table 101 of IS 302-2-80 :2017))	-	32200	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017 and Cl.21.1 of IS 302-2:2008))	-	32200	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017 and Cl.21.1 of IS 302-2:2008))	-	32200	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017))	-	32200	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	32200	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	32200	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	32200	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	32200	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	32200	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	32200	-
9(Construction (as per Cl.22.101 of IS 302-2-80 :2017))	-	32200	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	32200	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	32200	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	32200	-
9(Components (as per Cl.24.103 of IS 302-2-80 :2017))	-	32200	-
9(Components (as per Cl.24.104 of IS 302-2-80 :2017))	-	32200	-
9(Supply Connection and External Flexible cords (as per Cl.25 of IS 302-2-80 :2017))	-	32200	-
9(Terminals for External conductors (as per Cl.26 of IS 302-2-80 :2017))	-	32200	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	32200	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	32200	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	32200	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	32200	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	32200	-
9(Screw and connections (as per Cl.28 of IS 302-2-80 :2017))	-	32200	-
9(Clearances, creepage distances and solid insulation (as per Cl.29 of IS 302-2-80 :2017))	-	32200	-
9(Clearances, creepage distances and solid insulation (as per Cl.29 of IS 302-2-80 :2017))	-	32200	-
9(Resistance to fire (Glow wire Test) (as per Cl.30 of IS 302-2-80 :2017))	-	32200	-
9(Resistance to rusting (as per Cl.31 of IS 302-2-80 :2017))	-	32200	-
9(Radiation, Toxicity and similar Hazards (Cl.32 of IS 302-2-80 :2017))	-	32200	-
10.1(Speed Regulators)	-	32200	-
10.2(Speed Regulators)	-	32200	-
10.2(Speed Regulators)	-	32200	-
10.2(Speed Regulators)	-	32200	-
10.3(Speed Regulators)	-	32200	-
10.4(Speed Regulators)	-	32200	-
10.5(Speed Regulators)	-	32200	-
10.6(Speed Regulators)	-	32200	-
10.7(Speed Regulators)	-	32200	-
10.7(Speed Regulators)	-	32200	-
10.8(Speed Regulators)	-	32200	-
11.1(Starting)	-	32200	-
11.2(Starting)	-	32200	-
12(Interchangeability)	-	32200	-
13(Silent Operation)	-	32200	-
14.3 & Table 1(Test for Air Performance)	-	32200	-
14.3 & Table 1(Test for Air Performance)	-	32200	-
14.4(Measurement of Speed of the Fan )	-	32200	-
14.4(Measurement of Speed of the Fan )	-	32200	-
14.5(Measurement of Power factor and Power Input)	-	32200	-
14.5(Measurement of Power factor and Power Input)	-	32200	-
16(Endurance Test)	-	32200	-
16(Endurance Test)	-	32200	-
16(Endurance Test)	-	32200	-
16(Endurance Test)	-	32200	-
16(Endurance Test)	-	32200	-
16(Endurance Test)	-	32200	-
17(Test for Harmonic Distortion)	-	32200	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	32200	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	32200	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	32200	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	32200	-
8.1(Marking (as per Cl. 7 of IS 302-2-80:2017))	-	32200	-
8.1,a(Marking )	-	32200	-
8.1,b(Marking )	-	32200	-
8.1,c(Marking )	-	32200	-
8.1,d(Marking )	-	32200	-
8.1,e(Marking )	-	32200	-
8.1,f(Marking )	-	32200	-
8.1,g(Marking )	-	32200	-
8.2(Marking )	-	32200	-
8.3(Marking )	-	32200	-
8.3,a(Marking )	-	32200	-
8.3,b(Marking )	-	32200	-
8.3,c(Marking )	-	32200	-
8.3,d(Marking )	-	32200	-
8.3,e(Marking )	-	32200	-
8.4(Marking )	-	32200	-
8(Marking (as per Cl. 7.1 of IS 302-2-80:2017))	-	32200	-
8(Marking (as per Cl. 7 of IS 302-2-80:2017, Cl.7.1 (f) of IS 302-1:2008))	-	32200	-
8(Marking (as per Cl. 7 of IS 302-2-80:2017, Cl.7.1(g) of IS 302-1:2008))	-	32200	-
8(Marking (as per Cl.7.12.1(a) of IS 302-2-80:2017))	-	32200	-
6.2(Rating)	-	32200	-
9(Protection against access to live parts (as per Cl.8 of IS 302-2-80 :2017))	-	32200	-
9(Power Input & current (as per Cl.10 of IS 302-2-80 :2017))	-	32200	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	32200	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	32200	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	32200	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	32200	-
9(Leakage current and Electric strength at operating temperature (as per Cl.13 of IS 302-2-80 :2017))	-	32200	-
9(Leakage current and Electric strength at operating temperature (as per Cl.13 of IS 302-2-80 :2017))	-	32200	-
9(Transient over Voltage (as per Cl.14 of IS 302-2-80 :2017))	-	32200	-
9(Moisture Resistance (After Humidity test) (as per Cl.15 & Cl.16 of IS 302-2-80 :2017) )	-	32200	-
9(Moisture Resistance (After Humidity test) (as per Cl.15 & Cl.16 of IS 302-2-80 :2017) )	-	32200	-
9(Overload protection of transformers and associated circuits (as per Cl.17 of IS 302-2-80 :2017))	-	32200	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	32200	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	32200	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	32200	-
9(Staibilty and mechanical hazards (as per Cl.20.102, Table 101 of IS 302-2-80 :2017))	-	32200	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017 and Cl.21.1 of IS 302-1:2008))	-	32200	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017 and Cl.21.1 of IS 302-1:2008))	-	32200	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017))	-	32200	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	32200	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	32200	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	32200	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	32200	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	32200	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	32200	-
9(Construction (as per Cl.22.101 of IS 302-2-80 :2017))	-	32200	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	32200	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	32200	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	32200	-
9(Components (as per Cl.24.103 of IS 302-2-80 :2017))	-	32200	-
9(Components (as per Cl.24.104 of IS 302-2-80 :2017))	-	32200	-
9(Supply Connection and External Flexible cords (as per Cl.25 of IS 302-2-80 :2017))	-	32200	-
9(Terminals for External conductors (as per Cl.26 of IS 302-2-80 :2017))	-	32200	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	32200	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	32200	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	32200	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	32200	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	32200	-
9(Screw and connections (as per Cl.28 of IS 302-2-80 :2017))	-	32200	-
9(Clearances, creepage distances and solid insulation (as per Cl.29 of IS 302-2-80 :2017))	-	32200	-
9(Clearances, creepage distances and solid insulation (as per Cl.29 of IS 302-2-80 :2017))	-	32200	-
9(Resistance to fire (Glow wire Test) (as per Cl.30 of IS 302-2-80 :2017))	-	32200	-
9(Resistance to rusting (as per Cl.31 of IS 302-2-80 :2017))	-	32200	-
9(Radiation, Toxicity and similar Hazards (Cl.32 of IS 302-2-80 :2017))	-	32200	-
10.1(Speed Regulators)	-	32200	-
10.2(Speed Regulators)	-	32200	-
10.2(Speed Regulators)	-	32200	Extra EMI/EMC charges: 1,80,000
10.2(Speed Regulators)	-	32200	Extra EMI/EMC charges: 1,80,000
10.3(Speed Regulators)	-	32200	Extra EMI/EMC charges: 1,80,000
10.4(Speed Regulators)	-	32200	Extra EMI/EMC charges: 1,80,000
10.5(Speed Regulators)	-	32200	Extra EMI/EMC charges: 1,80,000
10.6(Speed Regulators)	-	32200	Extra EMI/EMC charges: 1,80,000
10.7(Speed Regulators)	-	32200	Extra EMI/EMC charges: 1,80,000
10.7(Speed Regulators)	-	32200	Extra EMI/EMC charges: 1,80,000
10.8(Speed Regulators)	-	32200	Extra EMI/EMC charges: 1,80,000
11.1(Starting)	-	32200	Extra EMI/EMC charges: 1,80,000
11.2(Starting)	-	32200	Extra EMI/EMC charges: 1,80,000
12(Interchangeability)	-	32200	Extra EMI/EMC charges: 1,80,000
13(Silent Operation)	-	32200	-
14.3 & Table 1(Test for Air Performance)	-	32200	-
14.3 & Table 1(Test for Air Performance)	-	32200	-
14.4(Measurement of Speed of the Fan )	-	32200	-
14.4(Measurement of Speed of the Fan )	-	32200	-
14.5(Measurement of Power factor and Power Input)	-	32200	-
14.5(Measurement of Power factor and Power Input)	-	32200	-
16(Endurance Test)	-	32200	-
16(Endurance Test)	-	32200	-
16(Endurance Test)	-	32200	-
16(Endurance Test)	-	32200	-
16(Endurance Test)	-	32200	-
16(Endurance Test)	-	32200	-
17(Test for Harmonic Distortion)	-	32200	-
4(GENERAL REQUIREMENTS)	-	32200	-
5(GENERAL NOTES ON TESTS)	-	32200	-
15.1, 15.2(Air delivery and service value)	-	32200	-
Cl-9 (Cl-19.11.4.1 of IS 302-1)(Electrostatic discharge)	-	180000	-
Cl-9 (Cl-19.11.4.2 of IS 302-1)(Radiated Fields)	-	180000	-
Cl-9 (Cl-19.11.4.3 of IS 302-1)(Fast transient bursts)	-	180000	-
Cl-9 (Cl-19.11.4.4 of IS 302-1)(Surge Immunity test)	-	180000	-
Cl-9 (Cl-19.11.4.5 of IS 302-1)(Immunity to conducted discharge)	-	180000	-
Cl-9 (Cl-19.11.4.6 of IS 302-1)(Voltage dips and interruptions)	-	180000	-
Cl-9 (Cl-19.11.4.7 of IS 302-1)(Harmonics)	-	180000	-
Cl-9 (Cl-19.101 of IS 302-1)(Abnormal Operation)	-	32200	-
(Cl. 17 of IS 302-2-80 :2017)(Overload protection of transformers and associated circuits)	-	32200	-
(Cl.4.4 of IS 374: 2019)(Bearings)	-	32200	-
(Cl. 4.5 of IS 374: 2019)(Brushless DC Motor)	-	32200	-
(Cl.4.6 of IS 374: 2019)(Enclosure)	-	32200	-
(Cl. 7.6 of IS 302 Part 1)(Marking and Instructions)	-	32200	-
Cl. 7.8 of IS 302-2-80 :2017(MARKING AND INSTRUCTIONS)	-	32200	-
(Cl. 7.12 of IS 302-2-80 :2017)(Marking and Instructions)	-	32200	-
(Cl. 7.12.1 of IS 302-2-80 :2017)(Marking and Instructions)	-	32200	-
(Cl. 7.12.5 of IS 302-1: 2008)(Marking and Instructions)	-	32200	-
(Cl. 7.12.5 of IS 302-1: 2008)(Marking and Instructions)	-	32200	-
(Cl. 7.12.5 of IS 302-1: 2008)(Marking and Instructions)	-	32200	-
(Cl. 7.12.7 of IS 302-1: 2008(Marking and Instructions)	-	32200	-
(Cl. 7.13 of IS 302-1: 2008)(Marking and Instructions)	-	32200	-
(Cl. 7.14 of IS 302-1: 2008)(Marking and Instructions)	-	32200	-
(Cl. 10.1 of IS 374: 2019)(SPEED REGULATORS)	-	32200	-
(Cl. 10.3 of IS 374: 2019)(SPEED REGULATORS)	-	32200	-
(Cl. 10.4 of IS 374: 2019)(SPEED REGULATORS)	-	32200	-
(Cl. 10.7 of IS 374: 2019)(SPEED REGULATORS)	-	32200	-
(Cl. 10.7 of IS 374: 2019)(SPEED REGULATORS)	-	32200	-
(Cl. 10.8 of IS 374: 2019)(SPEED REGULATORS)	-	32200	-
(Cl. 11.2 of IS 374: 2019)(STARTING)	-	32200	-
(Cl. 13 of IS 374: 2019)(SILENT OPERATION)	-	32200	-
(Cl. 15.1 of IS 374: 2019)(PERFORMANCE REQUIREMENTS)	-	32200	-
(Cl. 15.1 of IS 374: 2019)(PERFORMANCE REQUIREMENTS)	-	32200	-
(Cl. 17 of IS 374: 2019(Test for Harmonic Distortion)	-	32200	-
(Cl. 8.2 of IS 302-1: 2008)(PROTECTION AGAINST ACCESS TO LIVE PARTS)	-	32200	-
(Cl. 11 of IS 302-1: 2008)(HEATING)	-	32200	-
(Cl. 15 of IS 302-1: 2008)(MOISTURE RESISTANCE)	-	32200	-
(Cl. 15 of IS 302-1: 2008)(MOISTURE RESISTANCE)	-	32200	-
(Cl. 15 of IS 302-1: 2008.(MOISTURE RESISTANCE)	-	32200	-
(Cl. 17 of IS 302-1: 2008)(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	32200	-
(Cl. 17 of IS 302-1: 2008)(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	32200	-
(Cl. 19.13 of IS 302-1: 2008)(ABNORMAL OPERATION)	-	32200	-
(Cl. 19.7 of IS 302-1: 2008)(ABNORMAL OPERATION)	-	32200	-
(Cl. 19 of IS 302-2-80 :2017)(ABNORMAL OPERATION)	-	32200	-
(Cl. 19.13 of IS 302-1: 2008)(ABNORMAL OPERATION)	-	32200	-
(Cl. 19.13 of IS 302-1: 2008)(ABNORMAL OPERATION)	-	32200	-
(Cl. 19.13 of IS 302-1: 2008)(ABNORMAL OPERATION)	-	32200	-
(Cl. 19.13 of IS 302-1: 2008)(ABNORMAL OPERATION)	-	32200	-
(Cl. 20.102 of IS 302-2-80 :2017)(STABILITY AND MECHANICAL HAZARDS)	-	32200	-
(Cl. 22.2 of IS 302-1: 2008)(CONSTRUCTION)	-	32200	-
(Cl. 22.14 of IS 302-1: 2008)(CONSTRUCTION)	-	32200	-
(Cl. 22.18 of IS 302-1: 2008)(Electric Ceiling type fan-Specification)	-	32200	-
(Cl. 22.21 of IS 302-1: 2008)(CONSTRUCTION)	-	32200	-
(Cl. 22.22 of IS 302-1: 2008)(CONSTRUCTION)	-	32200	-
(Cl. 22.41 of IS 302-1: 2008)(CONSTRUCTION)	-	32200	-
(Cl. 22.44 of IS 302-1: 2008)(CONSTRUCTION)	-	32200	-
(Cl. 22.101 of IS 302-2-80: 2017)(CONSTRUCTION)	-	32200	-
(Cl. 23.1 of IS 302-1: 2008)(INTERNAL WIRING)	-	32200	-
(Cl. 23.2 of IS 302-1: 2008)(INTERNAL WIRING)	-	32200	-
(Cl. 23.4 of IS 302-1: 2008)(INTERNAL WIRING)	-	32200	-
(Cl. 23.5 of IS 302-1: 2008)(INTERNAL WIRING)	-	32200	-
(Cl. 23.6 of IS 302-1: 2008)(INTERNAL WIRING)	-	32200	-
(Cl. 23.7 of IS 302-1: 2008)(INTERNAL WIRING)	-	32200	-
(Cl. 23.9 of IS 302-1: 2008)(INTERNAL WIRING)	-	32200	-
(Cl. 23.10 of IS 302-1: 2008)(INTERNAL WIRING)	-	32200	-
(Cl. 24.1 of IS 302-1: 2008)(COMPONENTS)	-	32200	-
(Cl. 24.5 of IS 302-1: 2008)(COMPONENTS)	-	32200	-
(Cl. 24.105 of IS IS 302-2-80 :2017)(COMPONENTS)	-	32200	-
(Cl. 26.1 of IS 302-1: 2008)(TERMINALS FOR EXTERNAL CONDUCTORS)	-	32200	-
(Cl. 26.8 of IS 302-1: 2008)(TERMINALS FOR EXTERNAL CONDUCTORS)	-	32200	-
(Cl. 26.9 of IS 302-1: 2008)(TERMINALS FOR EXTERNAL CONDUCTORS)	-	32200	-
(Cl. 26.10 of IS 302-1: 2008)(TERMINALS FOR EXTERNAL CONDUCTORS)	-	32200	-
(Cl. 27.1 of IS 302-1: 2008)(PROVISION FOR EARTHING)	-	32200	-
(Cl. 27.2 of IS 302-1: 2008)(PROVISION FOR EARTHING)	-	32200	-
(Cl. 27.4 of IS 302-1: 2008)(PROVISION FOR EARTHING)	-	32200	-
(Cl. 27.5 of IS 302-1: 2008)(PROVISION FOR EARTHING)	-	32200	-
(Cl. 28.4 of IS 302-1: 2008)(SCREWS AND CONNECTIONS)	-	32200	-
(Cl. 30.2 of IS 302-1: 2008)(RESISTANCE TO HEAT AND FIRE)	-	32200	-
(Cl. 30.2 of IS 302-1: 2008)(RESISTANCE TO HEAT AND FIRE)	-	32200	-
(Cl. 32 of IS 302-1: 2008)(Radiation, toxicity and similar hazards)	-	32200	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	32200	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	32200	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	32200	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	32200	-
8.1(Marking (as per Cl. 7 of IS 302-2-80:2017))	-	32200	-
8.1,a(Marking )	-	32200	-
8.1,b(Marking )	-	32200	-
8.1,c(Marking )	-	32200	-
8.1,d(Marking )	-	32200	-
8.1,e(Marking )	-	32200	-
8.1,f(Marking )	-	32200	-
8.1,g(Marking )	-	32200	-
8.2(Marking )	-	32200	-
8.3,a(Marking )	-	32200	-
8.3,b(Marking )	-	32200	-
8.3,c(Marking )	-	32200	-
8.3,d(Marking )	-	32200	-
8.3,e(Marking )	-	32200	-
8.4(Marking )	-	32200	-
8(Marking (as per Cl. 7.1 of IS 302-2-80:2017))	-	32200	-
8(Marking (as per Cl. 7 of IS 302-2-80:2017, Cl.7.1 (f) of IS 302-1:2008))	-	32200	-
8(Marking (as per Cl. 7 of IS 302-2-80:2017, Cl.7.1(g) of IS 302-1:2008))	-	32200	-
8(Marking (as per Cl.7.12.1(a) of IS 302-2-80:2017))	-	32200	-
6.2(Rating)	-	32200	-
9(Protection against access to live parts (as per Cl.8 of IS 302-2-80 :2017))	-	32200	-
9(Power Input & current (as per Cl.10 of IS 302-2-80 :2017))	-	32200	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	32200	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	32200	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	32200	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	32200	-
9(Leakage current and Electric strength at operating temperature (as per Cl.13 of IS 302-2-80 :2017))	-	32200	-
9(Leakage current and Electric strength at operating temperature (as per Cl.13 of IS 302-2-80 :2017))	-	32200	-
9(Transient over Voltage (as per Cl.14 of IS 302-2-80 :2017))	-	32200	-
9(Moisture Resistance (After Humidity test) (as per Cl.15 & Cl.16 of IS 302-2-80 :2017) )	-	32200	-
9(Moisture Resistance (After Humidity test) (as per Cl.15 & Cl.16 of IS 302-2-80 :2017) )	-	32200	-
9(Overload protection of transformers and associated circuits (as per Cl.17 of IS 302-2-80 :2017))	-	32200	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	32200	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	32200	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	32200	-
9(Staibilty and mechanical hazards (as per Cl.20.102, Table 101 of IS 302-2-80 :2017))	-	32200	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017 and Cl.21.1 of IS 302-2:2008))	-	32200	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017 and Cl.21.1 of IS 302-2:2008))	-	32200	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017))	-	32200	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	32200	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	32200	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	32200	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	32200	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	32200	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	32200	-
9(Construction (as per Cl.22.101 of IS 302-2-80 :2017))	-	32200	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	32200	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	32200	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	32200	-
9(Components (as per Cl.24.103 of IS 302-2-80 :2017))	-	32200	-
9(Components (as per Cl.24.104 of IS 302-2-80 :2017))	-	32200	-
9(Supply Connection and External Flexible cords (as per Cl.25 of IS 302-2-80 :2017))	-	32200	-
9(Terminals for External conductors (as per Cl.26 of IS 302-2-80 :2017))	-	32200	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	32200	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	32200	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	32200	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	32200	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	32200	-
9(Screw and connections (as per Cl.28 of IS 302-2-80 :2017))	-	32200	-
9(Clearances, creepage distances and solid insulation (as per Cl.29 of IS 302-2-80 :2017))	-	32200	-
9(Clearances, creepage distances and solid insulation (as per Cl.29 of IS 302-2-80 :2017))	-	32200	-
9(Resistance to fire (Glow wire Test) (as per Cl.30 of IS 302-2-80 :2017))	-	32200	-
9(Resistance to rusting (as per Cl.31 of IS 302-2-80 :2017))	-	32200	-
9(Radiation, Toxicity and similar Hazards (Cl.32 of IS 302-2-80 :2017))	-	32200	-
10.1(Speed Regulators)	-	32200	-
10.2(Speed Regulators)	-	32200	-
10.2(Speed Regulators)	-	32200	-
10.2(Speed Regulators)	-	32200	-
10.3(Speed Regulators)	-	32200	-
10.4(Speed Regulators)	-	32200	-
10.5(Speed Regulators)	-	32200	-
10.6(Speed Regulators)	-	32200	-
10.7(Speed Regulators)	-	32200	-
10.7(Speed Regulators)	-	32200	-
10.8(Speed Regulators)	-	32200	-
11.1(Starting)	-	32200	-
11.2(Starting)	-	32200	-
12(Interchangeability)	-	32200	-
13(Silent Operation)	-	32200	-
14.3 & Table 1(Test for Air Performance)	-	32200	-
14.3 & Table 1(Test for Air Performance)	-	32200	-
14.4(Measurement of Speed of the Fan )	-	32200	-
14.4(Measurement of Speed of the Fan )	-	32200	-
14.5(Measurement of Power factor and Power Input)	-	32200	-
14.5(Measurement of Power factor and Power Input)	-	32200	-
16(Endurance Test)	-	32200	-
16(Endurance Test)	-	32200	-
16(Endurance Test)	-	32200	-
16(Endurance Test)	-	32200	-
16(Endurance Test)	-	32200	-
16(Endurance Test)	-	32200	-
17(Test for Harmonic Distortion)	-	32200	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	32200	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	32200	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	32200	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	32200	-
8.1(Marking (as per Cl. 7 of IS 302-2-80:2017))	-	32200	-
8.1,a(Marking )	-	32200	-
8.1,b(Marking )	-	32200	-
8.1,c(Marking )	-	32200	-
8.1,d(Marking )	-	32200	-
8.1,e(Marking )	-	32200	-
8.1,f(Marking )	-	32200	-
8.1,g(Marking )	-	32200	-
8.2(Marking )	-	32200	-
8.3(Marking )	-	32200	-
8.3,a(Marking )	-	32200	-
8.3,b(Marking )	-	32200	-
8.3,c(Marking )	-	32200	-
8.3,d(Marking )	-	32200	-
8.3,e(Marking )	-	32200	-
8.4(Marking )	-	32200	-
8(Marking (as per Cl. 7.1 of IS 302-2-80:2017))	-	32200	-
8(Marking (as per Cl. 7 of IS 302-2-80:2017, Cl.7.1 (f) of IS 302-1:2008))	-	32200	-
8(Marking (as per Cl. 7 of IS 302-2-80:2017, Cl.7.1(g) of IS 302-1:2008))	-	32200	-
8(Marking (as per Cl.7.12.1(a) of IS 302-2-80:2017))	-	32200	-
6.2(Rating)	-	32200	-
9(Protection against access to live parts (as per Cl.8 of IS 302-2-80 :2017))	-	32200	-
9(Power Input & current (as per Cl.10 of IS 302-2-80 :2017))	-	32200	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	32200	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	32200	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	32200	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	32200	-
9(Leakage current and Electric strength at operating temperature (as per Cl.13 of IS 302-2-80 :2017))	-	32200	-
9(Leakage current and Electric strength at operating temperature (as per Cl.13 of IS 302-2-80 :2017))	-	32200	-
9(Transient over Voltage (as per Cl.14 of IS 302-2-80 :2017))	-	32200	-
9(Moisture Resistance (After Humidity test) (as per Cl.15 & Cl.16 of IS 302-2-80 :2017) )	-	32200	-
9(Moisture Resistance (After Humidity test) (as per Cl.15 & Cl.16 of IS 302-2-80 :2017) )	-	32200	-
9(Overload protection of transformers and associated circuits (as per Cl.17 of IS 302-2-80 :2017))	-	32200	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	32200	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	32200	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	32200	-
9(Staibilty and mechanical hazards (as per Cl.20.102, Table 101 of IS 302-2-80 :2017))	-	32200	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017 and Cl.21.1 of IS 302-1:2008))	-	32200	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017 and Cl.21.1 of IS 302-1:2008))	-	32200	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017))	-	32200	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	32200	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	32200	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	32200	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	32200	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	32200	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	32200	-
9(Construction (as per Cl.22.101 of IS 302-2-80 :2017))	-	32200	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	32200	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	32200	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	32200	-
9(Components (as per Cl.24.103 of IS 302-2-80 :2017))	-	32200	-
9(Components (as per Cl.24.104 of IS 302-2-80 :2017))	-	32200	-
9(Supply Connection and External Flexible cords (as per Cl.25 of IS 302-2-80 :2017))	-	32200	-
9(Terminals for External conductors (as per Cl.26 of IS 302-2-80 :2017))	-	32200	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	32200	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	32200	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	32200	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	32200	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	32200	-
9(Screw and connections (as per Cl.28 of IS 302-2-80 :2017))	-	32200	-
9(Clearances, creepage distances and solid insulation (as per Cl.29 of IS 302-2-80 :2017))	-	32200	-
9(Clearances, creepage distances and solid insulation (as per Cl.29 of IS 302-2-80 :2017))	-	32200	-
9(Resistance to fire (Glow wire Test) (as per Cl.30 of IS 302-2-80 :2017))	-	32200	-
9(Resistance to rusting (as per Cl.31 of IS 302-2-80 :2017))	-	32200	-
9(Radiation, Toxicity and similar Hazards (Cl.32 of IS 302-2-80 :2017))	-	32200	-
10.1(Speed Regulators)	-	32200	-
10.2(Speed Regulators)	-	32200	-
10.2(Speed Regulators)	-	32200	-
10.2(Speed Regulators)	-	32200	-
10.3(Speed Regulators)	-	32200	-
10.4(Speed Regulators)	-	32200	-
10.5(Speed Regulators)	-	32200	-
10.6(Speed Regulators)	-	32200	-
10.7(Speed Regulators)	-	32200	-
10.7(Speed Regulators)	-	32200	-
10.8(Speed Regulators)	-	32200	-
11.1(Starting)	-	32200	-
11.2(Starting)	-	32200	-
12(Interchangeability)	-	32200	-
13(Silent Operation)	-	32200	-
14.3 & Table 1(Test for Air Performance)	-	32200	-
14.3 & Table 1(Test for Air Performance)	-	32200	-
14.4(Measurement of Speed of the Fan )	-	32200	-
14.4(Measurement of Speed of the Fan )	-	32200	-
14.5(Measurement of Power factor and Power Input)	-	32200	-
14.5(Measurement of Power factor and Power Input)	-	32200	-
16(Endurance Test)	-	32200	-
16(Endurance Test)	-	32200	-
16(Endurance Test)	-	32200	-
16(Endurance Test)	-	32200	-
16(Endurance Test)	-	32200	-
16(Endurance Test)	-	32200	-
17(Test for Harmonic Distortion)	-	32200	-
4(GENERAL REQUIREMENTS)	-	32200	-
5(GENERAL NOTES ON TESTS)	-	32200	-
15.1, 15.2(Air delivery and service value)	-	32200	-
Cl-9 (Cl-19.11.4.1 of IS 302-1)(Electrostatic discharge)	-	180000	-
Cl-9 (Cl-19.11.4.2 of IS 302-1)(Radiated Fields)	-	180000	-
Cl-9 (Cl-19.11.4.3 of IS 302-1)(Fast transient bursts)	-	180000	-
Cl-9 (Cl-19.11.4.4 of IS 302-1)(Surge Immunity test)	-	180000	-
Cl-9 (Cl-19.11.4.5 of IS 302-1)(Immunity to conducted discharge)	-	180000	-
Cl-9 (Cl-19.11.4.6 of IS 302-1)(Voltage dips and interruptions)	-	180000	-
Cl-9 (Cl-19.11.4.7 of IS 302-1)(Harmonics)	-	180000	-
Cl-9 (Cl-19.101 of IS 302-1)(Abnormal Operation)	-	180000	-
(Cl. 17 of IS 302-2-80 :2017)(Overload protection of transformers and associated circuits)	-	32200	-
(Cl.4.4 of IS 374: 2019)(Bearings)	-	32200	-
(Cl. 4.5 of IS 374: 2019)(Brushless DC Motor)	-	32200	-
(Cl.4.6 of IS 374: 2019)(Enclosure)	-	32200	-
(Cl. 7.6 of IS 302 Part 1)(Marking and Instructions)	-	32200	-
Cl. 7.8 of IS 302-2-80 :2017(MARKING AND INSTRUCTIONS)	-	32200	-
(Cl. 7.12 of IS 302-2-80 :2017)(Marking and Instructions)	-	32200	-
(Cl. 7.12.1 of IS 302-2-80 :2017)(Marking and Instructions)	-	32200	-
(Cl. 7.12.5 of IS 302-1: 2008)(Marking and Instructions)	-	32200	-
(Cl. 7.12.5 of IS 302-1: 2008)(Marking and Instructions)	-	32200	-
(Cl. 7.12.5 of IS 302-1: 2008)(Marking and Instructions)	-	32200	-
(Cl. 7.12.7 of IS 302-1: 2008(Marking and Instructions)	-	32200	-
(Cl. 7.13 of IS 302-1: 2008)(Marking and Instructions)	-	32200	-
(Cl. 7.14 of IS 302-1: 2008)(Marking and Instructions)	-	32200	-
(Cl. 10.1 of IS 374: 2019)(SPEED REGULATORS)	-	32200	-
(Cl. 10.3 of IS 374: 2019)(SPEED REGULATORS)	-	32200	-
(Cl. 10.4 of IS 374: 2019)(SPEED REGULATORS)	-	32200	-
(Cl. 10.7 of IS 374: 2019)(SPEED REGULATORS)	-	32200	-
(Cl. 10.7 of IS 374: 2019)(SPEED REGULATORS)	-	32200	-
(Cl. 10.8 of IS 374: 2019)(SPEED REGULATORS)	-	32200	-
(Cl. 11.2 of IS 374: 2019)(STARTING)	-	32200	-
(Cl. 13 of IS 374: 2019)(SILENT OPERATION)	-	32200	-
(Cl. 15.1 of IS 374: 2019)(PERFORMANCE REQUIREMENTS)	-	32200	-
(Cl. 15.1 of IS 374: 2019)(PERFORMANCE REQUIREMENTS)	-	32200	-
(Cl. 17 of IS 374: 2019(Test for Harmonic Distortion)	-	32200	-
(Cl. 8.2 of IS 302-1: 2008)(PROTECTION AGAINST ACCESS TO LIVE PARTS)	-	32200	-
(Cl. 11 of IS 302-1: 2008)(HEATING)	-	32200	-
(Cl. 15 of IS 302-1: 2008)(MOISTURE RESISTANCE)	-	32200	-
(Cl. 15 of IS 302-1: 2008)(MOISTURE RESISTANCE)	-	32200	-
(Cl. 15 of IS 302-1: 2008.(MOISTURE RESISTANCE)	-	32200	-
(Cl. 17 of IS 302-1: 2008)(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	32200	-
(Cl. 17 of IS 302-1: 2008)(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	32200	-
(Cl. 19.13 of IS 302-1: 2008)(ABNORMAL OPERATION)	-	32200	-
(Cl. 19.7 of IS 302-1: 2008)(ABNORMAL OPERATION)	-	32200	-
(Cl. 19 of IS 302-2-80 :2017)(ABNORMAL OPERATION)	-	32200	-
(Cl. 19.13 of IS 302-1: 2008)(ABNORMAL OPERATION)	-	32200	-
(Cl. 19.13 of IS 302-1: 2008)(ABNORMAL OPERATION)	-	32200	-
(Cl. 19.13 of IS 302-1: 2008)(ABNORMAL OPERATION)	-	32200	-
(Cl. 19.13 of IS 302-1: 2008)(ABNORMAL OPERATION)	-	32200	-
(Cl. 20.102 of IS 302-2-80 :2017)(STABILITY AND MECHANICAL HAZARDS)	-	32200	-
(Cl. 22.2 of IS 302-1: 2008)(CONSTRUCTION)	-	32200	-
(Cl. 22.14 of IS 302-1: 2008)(CONSTRUCTION)	-	32200	-
(Cl. 22.18 of IS 302-1: 2008)(Electric Ceiling type fan-Specification)	-	32200	-
(Cl. 22.21 of IS 302-1: 2008)(CONSTRUCTION)	-	32200	-
(Cl. 22.22 of IS 302-1: 2008)(CONSTRUCTION)	-	32200	-
(Cl. 22.41 of IS 302-1: 2008)(CONSTRUCTION)	-	32200	-
(Cl. 22.44 of IS 302-1: 2008)(CONSTRUCTION)	-	32200	-
(Cl. 22.101 of IS 302-2-80: 2017)(CONSTRUCTION)	-	32200	-
(Cl. 23.1 of IS 302-1: 2008)(INTERNAL WIRING)	-	32200	-
(Cl. 23.2 of IS 302-1: 2008)(INTERNAL WIRING)	-	32200	-
(Cl. 23.4 of IS 302-1: 2008)(INTERNAL WIRING)	-	32200	-
(Cl. 23.5 of IS 302-1: 2008)(INTERNAL WIRING)	-	32200	-
(Cl. 23.6 of IS 302-1: 2008)(INTERNAL WIRING)	-	32200	-
(Cl. 23.7 of IS 302-1: 2008)(INTERNAL WIRING)	-	32200	-
(Cl. 23.9 of IS 302-1: 2008)(INTERNAL WIRING)	-	32200	-
(Cl. 23.10 of IS 302-1: 2008)(INTERNAL WIRING)	-	32200	-
(Cl. 24.1 of IS 302-1: 2008)(COMPONENTS)	-	32200	-
(Cl. 24.5 of IS 302-1: 2008)(COMPONENTS)	-	32200	-
(Cl. 24.105 of IS IS 302-2-80 :2017)(COMPONENTS)	-	32200	-
(Cl. 26.1 of IS 302-1: 2008)(TERMINALS FOR EXTERNAL CONDUCTORS)	-	32200	-
(Cl. 26.8 of IS 302-1: 2008)(TERMINALS FOR EXTERNAL CONDUCTORS)	-	32200	-
(Cl. 26.9 of IS 302-1: 2008)(TERMINALS FOR EXTERNAL CONDUCTORS)	-	32200	-
(Cl. 26.10 of IS 302-1: 2008)(TERMINALS FOR EXTERNAL CONDUCTORS)	-	32200	-
(Cl. 27.1 of IS 302-1: 2008)(PROVISION FOR EARTHING)	-	32200	-
(Cl. 27.2 of IS 302-1: 2008)(PROVISION FOR EARTHING)	-	32200	-
(Cl. 27.4 of IS 302-1: 2008)(PROVISION FOR EARTHING)	-	32200	-
(Cl. 27.5 of IS 302-1: 2008)(PROVISION FOR EARTHING)	-	32200	-
(Cl. 28.4 of IS 302-1: 2008)(SCREWS AND CONNECTIONS)	-	32200	-
(Cl. 30.2 of IS 302-1: 2008)(RESISTANCE TO HEAT AND FIRE)	-	32200	-
(Cl. 30.2 of IS 302-1: 2008)(RESISTANCE TO HEAT AND FIRE)	-	32200	-
(Cl. 32 of IS 302-1: 2008)(Radiation, toxicity and similar hazards)	-	32200	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	32200	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	32200	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	32200	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	32200	-
8.1(Marking (as per Cl. 7 of IS 302-2-80:2017))	-	32200	-
8.1,a(Marking )	-	32200	-
8.1,b(Marking )	-	32200	-
8.1,c(Marking )	-	32200	-
8.1,d(Marking )	-	32200	-
8.1,e(Marking )	-	32200	-
8.1,f(Marking )	-	32200	-
8.1,g(Marking )	-	32200	-
8.2(Marking )	-	32200	-
8.3,a(Marking )	-	32200	-
8.3,b(Marking )	-	32200	-
8.3,c(Marking )	-	32200	-
8.3,d(Marking )	-	32200	-
8.3,e(Marking )	-	32200	-
8.4(Marking )	-	32200	-
8(Marking (as per Cl. 7.1 of IS 302-2-80:2017))	-	32200	-
8(Marking (as per Cl. 7 of IS 302-2-80:2017, Cl.7.1 (f) of IS 302-1:2008))	-	32200	-
8(Marking (as per Cl. 7 of IS 302-2-80:2017, Cl.7.1(g) of IS 302-1:2008))	-	32200	-
8(Marking (as per Cl.7.12.1(a) of IS 302-2-80:2017))	-	32200	-
6.2(Rating)	-	32200	-
9(Protection against access to live parts (as per Cl.8 of IS 302-2-80 :2017))	-	32200	-
9(Power Input & current (as per Cl.10 of IS 302-2-80 :2017))	-	32200	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	32200	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	32200	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	32200	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	32200	-
9(Leakage current and Electric strength at operating temperature (as per Cl.13 of IS 302-2-80 :2017))	-	32200	-
9(Leakage current and Electric strength at operating temperature (as per Cl.13 of IS 302-2-80 :2017))	-	32200	-
9(Transient over Voltage (as per Cl.14 of IS 302-2-80 :2017))	-	32200	-
9(Moisture Resistance (After Humidity test) (as per Cl.15 & Cl.16 of IS 302-2-80 :2017) )	-	32200	-
9(Moisture Resistance (After Humidity test) (as per Cl.15 & Cl.16 of IS 302-2-80 :2017) )	-	32200	-
9(Overload protection of transformers and associated circuits (as per Cl.17 of IS 302-2-80 :2017))	-	32200	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	32200	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	32200	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	32200	-
9(Staibilty and mechanical hazards (as per Cl.20.102, Table 101 of IS 302-2-80 :2017))	-	32200	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017 and Cl.21.1 of IS 302-2:2008))	-	32200	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017 and Cl.21.1 of IS 302-2:2008))	-	32200	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017))	-	32200	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	32200	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	32200	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	32200	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	32200	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	32200	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	32200	-
9(Construction (as per Cl.22.101 of IS 302-2-80 :2017))	-	32200	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	32200	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	32200	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	32200	-
9(Components (as per Cl.24.103 of IS 302-2-80 :2017))	-	32200	-
9(Components (as per Cl.24.104 of IS 302-2-80 :2017))	-	32200	-
9(Supply Connection and External Flexible cords (as per Cl.25 of IS 302-2-80 :2017))	-	32200	-
9(Terminals for External conductors (as per Cl.26 of IS 302-2-80 :2017))	-	32200	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	32200	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	32200	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	32200	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	32200	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	32200	-
9(Screw and connections (as per Cl.28 of IS 302-2-80 :2017))	-	32200	-
9(Clearances, creepage distances and solid insulation (as per Cl.29 of IS 302-2-80 :2017))	-	32200	-
9(Clearances, creepage distances and solid insulation (as per Cl.29 of IS 302-2-80 :2017))	-	32200	-
9(Resistance to fire (Glow wire Test) (as per Cl.30 of IS 302-2-80 :2017))	-	32200	-
9(Resistance to rusting (as per Cl.31 of IS 302-2-80 :2017))	-	32200	-
9(Radiation, Toxicity and similar Hazards (Cl.32 of IS 302-2-80 :2017))	-	32200	-
10.1(Speed Regulators)	-	32200	-
10.2(Speed Regulators)	-	32200	-
10.2(Speed Regulators)	-	32200	-
10.2(Speed Regulators)	-	32200	-
10.3(Speed Regulators)	-	32200	-
10.4(Speed Regulators)	-	32200	-
10.5(Speed Regulators)	-	32200	-
10.6(Speed Regulators)	-	32200	-
10.7(Speed Regulators)	-	32200	-
10.7(Speed Regulators)	-	32200	-
10.8(Speed Regulators)	-	32200	-
11.1(Starting)	-	32200	-
11.2(Starting)	-	32200	-
12(Interchangeability)	-	32200	-
13(Silent Operation)	-	32200	-
14.3 & Table 1(Test for Air Performance)	-	32200	-
14.3 & Table 1(Test for Air Performance)	-	32200	-
14.4(Measurement of Speed of the Fan )	-	32200	-
14.4(Measurement of Speed of the Fan )	-	32200	-
14.5(Measurement of Power factor and Power Input)	-	32200	-
14.5(Measurement of Power factor and Power Input)	-	32200	-
16(Endurance Test)	-	32200	-
16(Endurance Test)	-	32200	-
16(Endurance Test)	-	32200	-
16(Endurance Test)	-	32200	-
16(Endurance Test)	-	32200	-
16(Endurance Test)	-	32200	-
17(Test for Harmonic Distortion)	-	32200	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	32200	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	32200	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	32200	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	32200	-
8.1(Marking (as per Cl. 7 of IS 302-2-80:2017))	-	32200	-
8.1,a(Marking )	-	32200	-
8.1,b(Marking )	-	32200	-
8.1,c(Marking )	-	32200	-
8.1,d(Marking )	-	32200	-
8.1,e(Marking )	-	32200	-
8.1,f(Marking )	-	32200	-
8.1,g(Marking )	-	32200	-
8.2(Marking )	-	32200	-
8.3(Marking )	-	32200	-
8.3,a(Marking )	-	32200	-
8.3,b(Marking )	-	32200	-
8.3,c(Marking )	-	32200	-
8.3,d(Marking )	-	32200	-
8.3,e(Marking )	-	32200	-
8.4(Marking )	-	32200	-
8(Marking (as per Cl. 7.1 of IS 302-2-80:2017))	-	32200	-
8(Marking (as per Cl. 7 of IS 302-2-80:2017, Cl.7.1 (f) of IS 302-1:2008))	-	32200	-
8(Marking (as per Cl. 7 of IS 302-2-80:2017, Cl.7.1(g) of IS 302-1:2008))	-	32200	-
8(Marking (as per Cl.7.12.1(a) of IS 302-2-80:2017))	-	32200	-
6.2(Rating)	-	32200	-
9(Protection against access to live parts (as per Cl.8 of IS 302-2-80 :2017))	-	32200	-
9(Power Input & current (as per Cl.10 of IS 302-2-80 :2017))	-	32200	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	32200	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	32200	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	32200	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	32200	-
9(Leakage current and Electric strength at operating temperature (as per Cl.13 of IS 302-2-80 :2017))	-	32200	-
9(Leakage current and Electric strength at operating temperature (as per Cl.13 of IS 302-2-80 :2017))	-	32200	-
9(Transient over Voltage (as per Cl.14 of IS 302-2-80 :2017))	-	32200	-
9(Moisture Resistance (After Humidity test) (as per Cl.15 & Cl.16 of IS 302-2-80 :2017) )	-	32200	-
9(Moisture Resistance (After Humidity test) (as per Cl.15 & Cl.16 of IS 302-2-80 :2017) )	-	32200	-
9(Overload protection of transformers and associated circuits (as per Cl.17 of IS 302-2-80 :2017))	-	32200	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	32200	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	32200	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	32200	-
9(Staibilty and mechanical hazards (as per Cl.20.102, Table 101 of IS 302-2-80 :2017))	-	32200	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017 and Cl.21.1 of IS 302-1:2008))	-	32200	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017 and Cl.21.1 of IS 302-1:2008))	-	32200	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017))	-	32200	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	32200	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	32200	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	32200	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	32200	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	32200	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	32200	-
9(Construction (as per Cl.22.101 of IS 302-2-80 :2017))	-	32200	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	32200	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	32200	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	32200	-
9(Components (as per Cl.24.103 of IS 302-2-80 :2017))	-	32200	-
9(Components (as per Cl.24.104 of IS 302-2-80 :2017))	-	32200	-
9(Supply Connection and External Flexible cords (as per Cl.25 of IS 302-2-80 :2017))	-	32200	-
9(Terminals for External conductors (as per Cl.26 of IS 302-2-80 :2017))	-	32200	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	32200	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	32200	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	32200	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	32200	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	32200	-
9(Screw and connections (as per Cl.28 of IS 302-2-80 :2017))	-	32200	-
9(Clearances, creepage distances and solid insulation (as per Cl.29 of IS 302-2-80 :2017))	-	32200	-
9(Clearances, creepage distances and solid insulation (as per Cl.29 of IS 302-2-80 :2017))	-	32200	-
9(Resistance to fire (Glow wire Test) (as per Cl.30 of IS 302-2-80 :2017))	-	32200	-
9(Resistance to rusting (as per Cl.31 of IS 302-2-80 :2017))	-	32200	-
9(Radiation, Toxicity and similar Hazards (Cl.32 of IS 302-2-80 :2017))	-	32200	-
10.1(Speed Regulators)	-	32200	-
10.2(Speed Regulators)	-	32200	-
10.2(Speed Regulators)	-	32200	-
10.2(Speed Regulators)	-	32200	-
10.3(Speed Regulators)	-	32200	-
10.4(Speed Regulators)	-	32200	-
10.5(Speed Regulators)	-	32200	-
10.6(Speed Regulators)	-	32200	-
10.7(Speed Regulators)	-	32200	-
10.7(Speed Regulators)	-	32200	-
10.8(Speed Regulators)	-	32200	-
11.1(Starting)	-	32200	-
11.2(Starting)	-	32200	-
12(Interchangeability)	-	32200	-
13(Silent Operation)	-	32200	-
14.3 & Table 1(Test for Air Performance)	-	32200	-
14.3 & Table 1(Test for Air Performance)	-	32200	-
14.4(Measurement of Speed of the Fan )	-	32200	-
14.4(Measurement of Speed of the Fan )	-	32200	-
14.5(Measurement of Power factor and Power Input)	-	32200	-
14.5(Measurement of Power factor and Power Input)	-	32200	-
16(Endurance Test)	-	32200	-
16(Endurance Test)	-	32200	-
16(Endurance Test)	-	32200	-
16(Endurance Test)	-	32200	-
16(Endurance Test)	-	32200	-
16(Endurance Test)	-	32200	-
17(Test for Harmonic Distortion)	-	32200	-
4(GENERAL REQUIREMENTS)	-	32200	-
5(GENERAL NOTES ON TESTS)	-	32200	-
15.1, 15.2(Air delivery and service value)	-	32200	-
Cl-9 (Cl-19.11.4.1 of IS 302-1)(Electrostatic discharge)	-	180000	-
Cl-9 (Cl-19.11.4.2 of IS 302-1)(Radiated Fields)	-	180000	-
Cl-9 (Cl-19.11.4.3 of IS 302-1)(Fast transient bursts)	-	180000	-
Cl-9 (Cl-19.11.4.4 of IS 302-1)(Surge Immunity test)	-	180000	-
Cl-9 (Cl-19.11.4.5 of IS 302-1)(Immunity to conducted discharge)	-	180000	-
Cl-9 (Cl-19.11.4.6 of IS 302-1)(Voltage dips and interruptions)	-	180000	-
Cl-9 (Cl-19.11.4.7 of IS 302-1)(Harmonics)	-	180000	-
Cl-9 (Cl-19.101 of IS 302-1)(Abnormal Operation)	-	32200	-
(Cl. 17 of IS 302-2-80 :2017)(Overload protection of transformers and associated circuits)	-	32200	-
(Cl.4.4 of IS 374: 2019)(Bearings)	-	32200	-
(Cl. 4.5 of IS 374: 2019)(Brushless DC Motor)	-	32200	-
(Cl.4.6 of IS 374: 2019)(Enclosure)	-	32200	-
(Cl. 7.6 of IS 302 Part 1)(Marking and Instructions)	-	32200	-
Cl. 7.8 of IS 302-2-80 :2017(MARKING AND INSTRUCTIONS)	-	32200	-
(Cl. 7.12 of IS 302-2-80 :2017)(Marking and Instructions)	-	32200	-
(Cl. 7.12.1 of IS 302-2-80 :2017)(Marking and Instructions)	-	32200	-
(Cl. 7.12.5 of IS 302-1: 2008)(Marking and Instructions)	-	32200	-
(Cl. 7.12.5 of IS 302-1: 2008)(Marking and Instructions)	-	32200	-
(Cl. 7.12.5 of IS 302-1: 2008)(Marking and Instructions)	-	32200	-
(Cl. 7.12.7 of IS 302-1: 2008(Marking and Instructions)	-	32200	-
(Cl. 7.13 of IS 302-1: 2008)(Marking and Instructions)	-	32200	-
(Cl. 7.14 of IS 302-1: 2008)(Marking and Instructions)	-	32200	-
(Cl. 10.1 of IS 374: 2019)(SPEED REGULATORS)	-	32200	-
(Cl. 10.3 of IS 374: 2019)(SPEED REGULATORS)	-	32200	-
(Cl. 10.4 of IS 374: 2019)(SPEED REGULATORS)	-	32200	-
(Cl. 10.7 of IS 374: 2019)(SPEED REGULATORS)	-	32200	-
(Cl. 10.7 of IS 374: 2019)(SPEED REGULATORS)	-	32200	-
(Cl. 10.8 of IS 374: 2019)(SPEED REGULATORS)	-	32200	-
(Cl. 11.2 of IS 374: 2019)(STARTING)	-	32200	-
(Cl. 13 of IS 374: 2019)(SILENT OPERATION)	-	32200	-
(Cl. 15.1 of IS 374: 2019)(PERFORMANCE REQUIREMENTS)	-	32200	-
(Cl. 15.1 of IS 374: 2019)(PERFORMANCE REQUIREMENTS)	-	32200	-
(Cl. 17 of IS 374: 2019(Test for Harmonic Distortion)	-	32200	-
(Cl. 8.2 of IS 302-1: 2008)(PROTECTION AGAINST ACCESS TO LIVE PARTS)	-	32200	-
(Cl. 11 of IS 302-1: 2008)(HEATING)	-	32200	-
(Cl. 15 of IS 302-1: 2008)(MOISTURE RESISTANCE)	-	32200	-
(Cl. 15 of IS 302-1: 2008)(MOISTURE RESISTANCE)	-	32200	-
(Cl. 15 of IS 302-1: 2008.(MOISTURE RESISTANCE)	-	32200	-
(Cl. 17 of IS 302-1: 2008)(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	32200	-
(Cl. 17 of IS 302-1: 2008)(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	32200	-
(Cl. 19.13 of IS 302-1: 2008)(ABNORMAL OPERATION)	-	32200	-
(Cl. 19.7 of IS 302-1: 2008)(ABNORMAL OPERATION)	-	32200	-
(Cl. 19 of IS 302-2-80 :2017)(ABNORMAL OPERATION)	-	32200	-
(Cl. 19.13 of IS 302-1: 2008)(ABNORMAL OPERATION)	-	32200	-
(Cl. 19.13 of IS 302-1: 2008)(ABNORMAL OPERATION)	-	32200	-
(Cl. 19.13 of IS 302-1: 2008)(ABNORMAL OPERATION)	-	32200	-
(Cl. 19.13 of IS 302-1: 2008)(ABNORMAL OPERATION)	-	32200	-
(Cl. 20.102 of IS 302-2-80 :2017)(STABILITY AND MECHANICAL HAZARDS)	-	32200	-
(Cl. 22.2 of IS 302-1: 2008)(CONSTRUCTION)	-	32200	-
(Cl. 22.14 of IS 302-1: 2008)(CONSTRUCTION)	-	32200	-
(Cl. 22.18 of IS 302-1: 2008)(Electric Ceiling type fan-Specification)	-	32200	-
(Cl. 22.21 of IS 302-1: 2008)(CONSTRUCTION)	-	32200	-
(Cl. 22.22 of IS 302-1: 2008)(CONSTRUCTION)	-	32200	-
(Cl. 22.41 of IS 302-1: 2008)(CONSTRUCTION)	-	32200	-
(Cl. 22.44 of IS 302-1: 2008)(CONSTRUCTION)	-	32200	-
(Cl. 22.101 of IS 302-2-80: 2017)(CONSTRUCTION)	-	32200	-
(Cl. 23.1 of IS 302-1: 2008)(INTERNAL WIRING)	-	32200	-
(Cl. 23.2 of IS 302-1: 2008)(INTERNAL WIRING)	-	32200	-
(Cl. 23.4 of IS 302-1: 2008)(INTERNAL WIRING)	-	32200	-
(Cl. 23.5 of IS 302-1: 2008)(INTERNAL WIRING)	-	32200	-
(Cl. 23.6 of IS 302-1: 2008)(INTERNAL WIRING)	-	32200	-
(Cl. 23.7 of IS 302-1: 2008)(INTERNAL WIRING)	-	32200	-
(Cl. 23.9 of IS 302-1: 2008)(INTERNAL WIRING)	-	32200	-
(Cl. 23.10 of IS 302-1: 2008)(INTERNAL WIRING)	-	32200	-
(Cl. 24.1 of IS 302-1: 2008)(COMPONENTS)	-	32200	-
(Cl. 24.5 of IS 302-1: 2008)(COMPONENTS)	-	32200	-
(Cl. 24.105 of IS IS 302-2-80 :2017)(COMPONENTS)	-	32200	-
(Cl. 26.1 of IS 302-1: 2008)(TERMINALS FOR EXTERNAL CONDUCTORS)	-	32200	-
(Cl. 26.8 of IS 302-1: 2008)(TERMINALS FOR EXTERNAL CONDUCTORS)	-	32200	-
(Cl. 26.9 of IS 302-1: 2008)(TERMINALS FOR EXTERNAL CONDUCTORS)	-	32200	Extra EMI/EMC charges: 1,80,000
(Cl. 26.10 of IS 302-1: 2008)(TERMINALS FOR EXTERNAL CONDUCTORS)	-	32200	Extra EMI/EMC charges: 1,80,000
(Cl. 27.1 of IS 302-1: 2008)(PROVISION FOR EARTHING)	-	32200	Extra EMI/EMC charges: 1,80,000
(Cl. 27.2 of IS 302-1: 2008)(PROVISION FOR EARTHING)	-	32200	-
(Cl. 27.4 of IS 302-1: 2008)(PROVISION FOR EARTHING)	-	32200	-
(Cl. 27.5 of IS 302-1: 2008)(PROVISION FOR EARTHING)	-	32200	-
(Cl. 28.4 of IS 302-1: 2008)(SCREWS AND CONNECTIONS)	-	32200	Extra EMI/EMC charges: 1,80,000
(Cl. 30.2 of IS 302-1: 2008)(RESISTANCE TO HEAT AND FIRE)	-	32200	Extra EMI/EMC charges: 1,80,000
(Cl. 30.2 of IS 302-1: 2008)(RESISTANCE TO HEAT AND FIRE)	-	32200	Extra EMI/EMC charges: 1,80,000
(Cl. 32 of IS 302-1: 2008)(Radiation, toxicity and similar hazards)	-	32200	Extra EMI/EMC charges: 1,80,000
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	0	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	0	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	0	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	0	-
8.1(Marking (as per Cl. 7 of IS 302-2-80:2017))	-	0	-
8.1,a(Marking )	-	0	-
8.1,b(Marking )	-	0	-
8.1,c(Marking )	-	0	-
8.1,d(Marking )	-	0	-
8.1,e(Marking )	-	0	-
8.1,f(Marking )	-	0	-
8.1,g(Marking )	-	0	-
8.2(Marking )	-	0	-
8.3,a(Marking )	-	0	-
8.3,b(Marking )	-	0	-
8.3,c(Marking )	-	0	-
8.3,d(Marking )	-	0	-
8.3,e(Marking )	-	0	-
8.4(Marking )	-	0	-
8(Marking (as per Cl. 7.1 of IS 302-2-80:2017))	-	0	-
8(Marking (as per Cl. 7 of IS 302-2-80:2017, Cl.7.1 (f) of IS 302-1:2008))	-	0	-
8(Marking (as per Cl. 7 of IS 302-2-80:2017, Cl.7.1(g) of IS 302-1:2008))	-	0	-
8(Marking (as per Cl.7.12.1(a) of IS 302-2-80:2017))	-	0	-
6.2(Rating)	-	0	-
9(Protection against access to live parts (as per Cl.8 of IS 302-2-80 :2017))	-	0	-
9(Power Input & current (as per Cl.10 of IS 302-2-80 :2017))	-	0	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	0	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	0	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	0	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	0	-
9(Leakage current and Electric strength at operating temperature (as per Cl.13 of IS 302-2-80 :2017))	-	0	-
9(Leakage current and Electric strength at operating temperature (as per Cl.13 of IS 302-2-80 :2017))	-	0	-
9(Transient over Voltage (as per Cl.14 of IS 302-2-80 :2017))	-	0	-
9(Moisture Resistance (After Humidity test) (as per Cl.15 & Cl.16 of IS 302-2-80 :2017) )	-	0	-
9(Moisture Resistance (After Humidity test) (as per Cl.15 & Cl.16 of IS 302-2-80 :2017) )	-	0	-
9(Overload protection of transformers and associated circuits (as per Cl.17 of IS 302-2-80 :2017))	-	0	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	0	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	0	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	0	-
9(Staibilty and mechanical hazards (as per Cl.20.102, Table 101 of IS 302-2-80 :2017))	-	0	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017 and Cl.21.1 of IS 302-2:2008))	-	0	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017 and Cl.21.1 of IS 302-2:2008))	-	0	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017))	-	0	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	0	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	0	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	0	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	0	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	0	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	0	-
9(Construction (as per Cl.22.101 of IS 302-2-80 :2017))	-	0	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	0	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	0	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	0	-
9(Components (as per Cl.24.103 of IS 302-2-80 :2017))	-	0	-
9(Components (as per Cl.24.104 of IS 302-2-80 :2017))	-	0	-
9(Supply Connection and External Flexible cords (as per Cl.25 of IS 302-2-80 :2017))	-	0	-
9(Terminals for External conductors (as per Cl.26 of IS 302-2-80 :2017))	-	0	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	0	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	0	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	0	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	0	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	0	-
9(Screw and connections (as per Cl.28 of IS 302-2-80 :2017))	-	0	-
9(Clearances, creepage distances and solid insulation (as per Cl.29 of IS 302-2-80 :2017))	-	0	-
9(Clearances, creepage distances and solid insulation (as per Cl.29 of IS 302-2-80 :2017))	-	0	-
9(Resistance to fire (Glow wire Test) (as per Cl.30 of IS 302-2-80 :2017))	-	0	-
9(Resistance to rusting (as per Cl.31 of IS 302-2-80 :2017))	-	0	-
9(Radiation, Toxicity and similar Hazards (Cl.32 of IS 302-2-80 :2017))	-	0	-
10.1(Speed Regulators)	-	0	-
10.2(Speed Regulators)	-	0	-
10.2(Speed Regulators)	-	0	-
10.2(Speed Regulators)	-	0	-
10.3(Speed Regulators)	-	0	-
10.4(Speed Regulators)	-	0	-
10.5(Speed Regulators)	-	0	-
10.6(Speed Regulators)	-	0	-
10.7(Speed Regulators)	-	0	-
10.7(Speed Regulators)	-	0	-
10.8(Speed Regulators)	-	0	-
11.1(Starting)	-	0	-
11.2(Starting)	-	0	-
12(Interchangeability)	-	0	-
13(Silent Operation)	-	0	-
14.3 & Table 1(Test for Air Performance)	-	0	-
14.3 & Table 1(Test for Air Performance)	-	0	-
14.4(Measurement of Speed of the Fan )	-	0	-
14.4(Measurement of Speed of the Fan )	-	0	-
14.5(Measurement of Power factor and Power Input)	-	0	-
14.5(Measurement of Power factor and Power Input)	-	0	-
16(Endurance Test)	-	0	-
16(Endurance Test)	-	0	-
16(Endurance Test)	-	0	-
16(Endurance Test)	-	0	-
16(Endurance Test)	-	0	-
16(Endurance Test)	-	0	-
17(Test for Harmonic Distortion)	-	0	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	0	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	0	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	0	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	0	-
8.1(Marking (as per Cl. 7 of IS 302-2-80:2017))	-	0	-
8.1,a(Marking )	-	0	-
8.1,b(Marking )	-	0	-
8.1,c(Marking )	-	0	-
8.1,d(Marking )	-	0	-
8.1,e(Marking )	-	0	-
8.1,f(Marking )	-	0	-
8.1,g(Marking )	-	0	-
8.2(Marking )	-	0	-
8.3(Marking )	-	0	-
8.3,a(Marking )	-	0	-
8.3,b(Marking )	-	0	-
8.3,c(Marking )	-	0	-
8.3,d(Marking )	-	0	-
8.3,e(Marking )	-	0	-
8.4(Marking )	-	0	-
8(Marking (as per Cl. 7.1 of IS 302-2-80:2017))	-	0	-
8(Marking (as per Cl. 7 of IS 302-2-80:2017, Cl.7.1 (f) of IS 302-1:2008))	-	0	-
8(Marking (as per Cl. 7 of IS 302-2-80:2017, Cl.7.1(g) of IS 302-1:2008))	-	0	-
8(Marking (as per Cl.7.12.1(a) of IS 302-2-80:2017))	-	0	-
6.2(Rating)	-	0	-
9(Protection against access to live parts (as per Cl.8 of IS 302-2-80 :2017))	-	0	-
9(Power Input & current (as per Cl.10 of IS 302-2-80 :2017))	-	0	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	0	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	0	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	0	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	0	-
9(Leakage current and Electric strength at operating temperature (as per Cl.13 of IS 302-2-80 :2017))	-	0	-
9(Leakage current and Electric strength at operating temperature (as per Cl.13 of IS 302-2-80 :2017))	-	0	-
9(Transient over Voltage (as per Cl.14 of IS 302-2-80 :2017))	-	0	-
9(Moisture Resistance (After Humidity test) (as per Cl.15 & Cl.16 of IS 302-2-80 :2017) )	-	0	-
9(Moisture Resistance (After Humidity test) (as per Cl.15 & Cl.16 of IS 302-2-80 :2017) )	-	0	-
9(Overload protection of transformers and associated circuits (as per Cl.17 of IS 302-2-80 :2017))	-	0	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	0	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	0	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	0	-
9(Staibilty and mechanical hazards (as per Cl.20.102, Table 101 of IS 302-2-80 :2017))	-	0	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017 and Cl.21.1 of IS 302-1:2008))	-	0	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017 and Cl.21.1 of IS 302-1:2008))	-	0	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017))	-	0	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	0	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	0	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	0	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	0	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	0	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	0	-
9(Construction (as per Cl.22.101 of IS 302-2-80 :2017))	-	0	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	0	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	0	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	0	-
9(Components (as per Cl.24.103 of IS 302-2-80 :2017))	-	0	-
9(Components (as per Cl.24.104 of IS 302-2-80 :2017))	-	0	-
9(Supply Connection and External Flexible cords (as per Cl.25 of IS 302-2-80 :2017))	-	0	-
9(Terminals for External conductors (as per Cl.26 of IS 302-2-80 :2017))	-	0	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	0	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	0	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	0	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	0	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	0	-
9(Screw and connections (as per Cl.28 of IS 302-2-80 :2017))	-	0	-
9(Clearances, creepage distances and solid insulation (as per Cl.29 of IS 302-2-80 :2017))	-	0	-
9(Clearances, creepage distances and solid insulation (as per Cl.29 of IS 302-2-80 :2017))	-	0	-
9(Resistance to fire (Glow wire Test) (as per Cl.30 of IS 302-2-80 :2017))	-	0	-
9(Resistance to rusting (as per Cl.31 of IS 302-2-80 :2017))	-	0	-
9(Radiation, Toxicity and similar Hazards (Cl.32 of IS 302-2-80 :2017))	-	0	-
10.1(Speed Regulators)	-	0	-
10.2(Speed Regulators)	-	0	-
10.2(Speed Regulators)	-	0	-
10.2(Speed Regulators)	-	0	-
10.3(Speed Regulators)	-	0	-
10.4(Speed Regulators)	-	0	-
10.5(Speed Regulators)	-	0	-
10.6(Speed Regulators)	-	0	-
10.7(Speed Regulators)	-	0	-
10.7(Speed Regulators)	-	0	-
10.8(Speed Regulators)	-	0	-
11.1(Starting)	-	0	-
11.2(Starting)	-	0	-
12(Interchangeability)	-	0	-
13(Silent Operation)	-	0	-
14.3 & Table 1(Test for Air Performance)	-	0	-
14.3 & Table 1(Test for Air Performance)	-	0	-
14.4(Measurement of Speed of the Fan )	-	0	-
14.4(Measurement of Speed of the Fan )	-	0	-
14.5(Measurement of Power factor and Power Input)	-	0	-
14.5(Measurement of Power factor and Power Input)	-	0	-
16(Endurance Test)	-	0	-
16(Endurance Test)	-	0	-
16(Endurance Test)	-	0	-
16(Endurance Test)	-	0	-
16(Endurance Test)	-	0	-
16(Endurance Test)	-	0	-
17(Test for Harmonic Distortion)	-	0	-
4(GENERAL REQUIREMENTS)	-	0	-
5(GENERAL NOTES ON TESTS)	-	0	-
15.1, 15.2(Air delivery and service value)	-	0	-
Cl-9 (Cl-19.11.4.1 of IS 302-1)(Electrostatic discharge)	-	0	-
Cl-9 (Cl-19.11.4.2 of IS 302-1)(Radiated Fields)	-	0	-
Cl-9 (Cl-19.11.4.3 of IS 302-1)(Fast transient bursts)	-	0	-
Cl-9 (Cl-19.11.4.4 of IS 302-1)(Surge Immunity test)	-	0	-
Cl-9 (Cl-19.11.4.5 of IS 302-1)(Immunity to conducted discharge)	-	0	-
Cl-9 (Cl-19.11.4.6 of IS 302-1)(Voltage dips and interruptions)	-	0	-
Cl-9 (Cl-19.11.4.7 of IS 302-1)(Harmonics)	-	0	-
Cl-9 (Cl-19.101 of IS 302-1)(Abnormal Operation)	-	0	-
(Cl. 17 of IS 302-2-80 :2017)(Overload protection of transformers and associated circuits)	-	0	-
(Cl.4.4 of IS 374: 2019)(Bearings)	-	0	-
(Cl. 4.5 of IS 374: 2019)(Brushless DC Motor)	-	0	-
(Cl.4.6 of IS 374: 2019)(Enclosure)	-	0	-
(Cl. 7.6 of IS 302 Part 1)(Marking and Instructions)	-	0	-
Cl. 7.8 of IS 302-2-80 :2017(MARKING AND INSTRUCTIONS)	-	0	-
(Cl. 7.12 of IS 302-2-80 :2017)(Marking and Instructions)	-	0	-
(Cl. 7.12.1 of IS 302-2-80 :2017)(Marking and Instructions)	-	0	-
(Cl. 7.12.5 of IS 302-1: 2008)(Marking and Instructions)	-	0	-
(Cl. 7.12.5 of IS 302-1: 2008)(Marking and Instructions)	-	0	-
(Cl. 7.12.5 of IS 302-1: 2008)(Marking and Instructions)	-	0	-
(Cl. 7.12.7 of IS 302-1: 2008(Marking and Instructions)	-	0	-
(Cl. 7.13 of IS 302-1: 2008)(Marking and Instructions)	-	0	-
(Cl. 7.14 of IS 302-1: 2008)(Marking and Instructions)	-	0	-
(Cl. 10.1 of IS 374: 2019)(SPEED REGULATORS)	-	0	-
(Cl. 10.3 of IS 374: 2019)(SPEED REGULATORS)	-	0	-
(Cl. 10.4 of IS 374: 2019)(SPEED REGULATORS)	-	0	-
(Cl. 10.7 of IS 374: 2019)(SPEED REGULATORS)	-	0	-
(Cl. 10.7 of IS 374: 2019)(SPEED REGULATORS)	-	0	-
(Cl. 10.8 of IS 374: 2019)(SPEED REGULATORS)	-	0	-
(Cl. 11.2 of IS 374: 2019)(STARTING)	-	0	-
(Cl. 13 of IS 374: 2019)(SILENT OPERATION)	-	0	-
(Cl. 15.1 of IS 374: 2019)(PERFORMANCE REQUIREMENTS)	-	0	-
(Cl. 15.1 of IS 374: 2019)(PERFORMANCE REQUIREMENTS)	-	0	-
(Cl. 17 of IS 374: 2019(Test for Harmonic Distortion)	-	0	-
(Cl. 8.2 of IS 302-1: 2008)(PROTECTION AGAINST ACCESS TO LIVE PARTS)	-	0	-
(Cl. 11 of IS 302-1: 2008)(HEATING)	-	0	-
(Cl. 15 of IS 302-1: 2008)(MOISTURE RESISTANCE)	-	0	-
(Cl. 15 of IS 302-1: 2008)(MOISTURE RESISTANCE)	-	0	-
(Cl. 15 of IS 302-1: 2008.(MOISTURE RESISTANCE)	-	0	-
(Cl. 17 of IS 302-1: 2008)(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	0	-
(Cl. 17 of IS 302-1: 2008)(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	0	-
(Cl. 19.13 of IS 302-1: 2008)(ABNORMAL OPERATION)	-	0	-
(Cl. 19.7 of IS 302-1: 2008)(ABNORMAL OPERATION)	-	0	-
(Cl. 19 of IS 302-2-80 :2017)(ABNORMAL OPERATION)	-	0	-
(Cl. 19.13 of IS 302-1: 2008)(ABNORMAL OPERATION)	-	0	-
(Cl. 19.13 of IS 302-1: 2008)(ABNORMAL OPERATION)	-	0	-
(Cl. 19.13 of IS 302-1: 2008)(ABNORMAL OPERATION)	-	0	-
(Cl. 19.13 of IS 302-1: 2008)(ABNORMAL OPERATION)	-	0	-
(Cl. 20.102 of IS 302-2-80 :2017)(STABILITY AND MECHANICAL HAZARDS)	-	0	-
(Cl. 22.2 of IS 302-1: 2008)(CONSTRUCTION)	-	0	-
(Cl. 22.14 of IS 302-1: 2008)(CONSTRUCTION)	-	0	-
(Cl. 22.18 of IS 302-1: 2008)(Electric Ceiling type fan-Specification)	-	0	-
(Cl. 22.21 of IS 302-1: 2008)(CONSTRUCTION)	-	0	-
(Cl. 22.22 of IS 302-1: 2008)(CONSTRUCTION)	-	0	-
(Cl. 22.41 of IS 302-1: 2008)(CONSTRUCTION)	-	0	-
(Cl. 22.44 of IS 302-1: 2008)(CONSTRUCTION)	-	0	-
(Cl. 22.101 of IS 302-2-80: 2017)(CONSTRUCTION)	-	0	-
(Cl. 23.1 of IS 302-1: 2008)(INTERNAL WIRING)	-	0	-
(Cl. 23.2 of IS 302-1: 2008)(INTERNAL WIRING)	-	0	-
(Cl. 23.4 of IS 302-1: 2008)(INTERNAL WIRING)	-	0	-
(Cl. 23.5 of IS 302-1: 2008)(INTERNAL WIRING)	-	0	-
(Cl. 23.6 of IS 302-1: 2008)(INTERNAL WIRING)	-	0	-
(Cl. 23.7 of IS 302-1: 2008)(INTERNAL WIRING)	-	0	-
(Cl. 23.9 of IS 302-1: 2008)(INTERNAL WIRING)	-	0	-
(Cl. 23.10 of IS 302-1: 2008)(INTERNAL WIRING)	-	0	-
(Cl. 24.1 of IS 302-1: 2008)(COMPONENTS)	-	0	-
(Cl. 24.5 of IS 302-1: 2008)(COMPONENTS)	-	0	-
(Cl. 24.105 of IS IS 302-2-80 :2017)(COMPONENTS)	-	0	-
(Cl. 26.1 of IS 302-1: 2008)(TERMINALS FOR EXTERNAL CONDUCTORS)	-	0	-
(Cl. 26.8 of IS 302-1: 2008)(TERMINALS FOR EXTERNAL CONDUCTORS)	-	0	-
(Cl. 26.9 of IS 302-1: 2008)(TERMINALS FOR EXTERNAL CONDUCTORS)	-	0	-
(Cl. 26.10 of IS 302-1: 2008)(TERMINALS FOR EXTERNAL CONDUCTORS)	-	0	-
(Cl. 27.1 of IS 302-1: 2008)(PROVISION FOR EARTHING)	-	0	-
(Cl. 27.2 of IS 302-1: 2008)(PROVISION FOR EARTHING)	-	0	-
(Cl. 27.4 of IS 302-1: 2008)(PROVISION FOR EARTHING)	-	0	-
(Cl. 27.5 of IS 302-1: 2008)(PROVISION FOR EARTHING)	-	0	-
(Cl. 28.4 of IS 302-1: 2008)(SCREWS AND CONNECTIONS)	-	0	-
(Cl. 30.2 of IS 302-1: 2008)(RESISTANCE TO HEAT AND FIRE)	-	0	-
(Cl. 30.2 of IS 302-1: 2008)(RESISTANCE TO HEAT AND FIRE)	-	0	-
(Cl. 32 of IS 302-1: 2008)(Radiation, toxicity and similar hazards)	-	0	-

08 May, 2028

-
Included w.e.f.19.06.2025

2935

INTERNATIONAL TESTING AND COMPLIANCE (OPC) PRIVATE LIMITED

8188026

IS 302 : Part 2 : Sec 8 (2024)

Household and Similar Electrical Appliances âSafety Part 2 Particular Requirements Section 8 Shavers, Hair Clippers and Similar Appliances (First Revision)

45000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking and instructions)	-	500	-
8(Protection against access to live parts)	-	800	-
10(Power input and current)	-	1200	-
11(Heating)	-	1500	-
12(Charging of metal-ion batteries)	-	1800	-
13.1 &13.2(Leakage current test)	-	1500	-
13.1 &13.3(Electric strength test)	-	1500	-
14(Transient overvoltages)	-	1000	-
15(Moisture resistance)	-	1600	-
15.3(Moisture resistance)	-	1600	-
16.1 &16.2(Leakage current test)	-	1500	-
16.1 & 16.3(Electric strength test)	-	1500	-
17(Overload protection of transformers and associated circuits)	-	800	-
19.1 to 19.13, Table No. - 9(Abnormal operation)	-	600	-
19.101(Abnormal operation)	-	600	-
20.1(Stability and mechanical hazards)	-	500	-
20.2(Stability and mechanical hazards)	-	500	-
21(Mechanical strength)	-	1000	-
21.101(Mechanical strength)	-	1000	-
21.102(Mechanical strength)	-	1000	-
21.103(Mechanical strength)	-	1000	-
23(Internal wiring)	-	1200	-
24(Components)	-	1400	-
25("Supply connection and external flexible cords")	-	1600	-
26("Terminals for external conductors")	-	1600	-
27(Provision for earthing)	-	1000	-
28(Screws and connections)	-	1000	-
29("Clearances, creepage distances and solid insulation")	-	1500	-
30(Resistance to heat and fire)	-	1500	-
31(Resistance to rusting)	-	1000	-
32("Radiation, toxicity and similar hazards")	-	500	-
22(Construction)	-	700	-
22.101(Construction)	-	700	-
22.102(Construction)	-	700	-
22.103(Construction)	-	700	-

08 Sep, 2028

-
Exclusion: Cl.19.11.4.1 to Cl.19.11.4.7 (EMI/EMC), Cl.15(IPX9), Cl.22.16(Auto Cord Reel Test), Cl.24(Components), Cl.22.46(Software Test), 32.2(Radiation Hazards)

2936

INTERNATIONAL TESTING AND COMPLIANCE (OPC) PRIVATE LIMITED

8188026

IS 302 : Part 2 : Sec 21 (2024)

Household and Similar Electrical Appliancesï¿½Safety Part 2 Particular Requirements Section 21 Storage Water Heaters

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(General requirement)	-	200	-
5(General conditions for the tests)	-	200	-
6(Classification)	-	500	-
7(Marking and instructions)	-	500	-
8(Protection against access to live parts)	-	800	-
9(Starting of motor-operated appliances)	-	500	-
10(Power input and current)	-	1200	-
11(Heating)	-	1500	-
13(Leakage current and electric strength at operating temperature)	-	1600	-
14(Transient overvoltages)	-	1000	-
15(Moisture resistance)	-	1000	-
16(Leakage current and electric strength)	-	1600	-
17(Overload protection of transformers and associated circuits)	-	1200	-
18(Endurance)	-	500	-
19(Abnormal operation)	-	900	-
20(Stability and mechanical hazards)	-	1000	-
21(Mechanical strength)	-	1200	-
22(Construction)	-	1600	-
23(Internal wiring)	-	1400	-
24(Components)	-	1000	-
29(Clearances, creepage distances and solid insulation)	-	1200	-
30(Resistance to heat and fire)	-	1500	-
31(Resistance to rusting)	-	1000	-
32(Radiation, toxicity and similar hazards)	-	500	-
12(Charging of metal-ion batteries)	-	700	-
22.101(rated pressure)	-	500	-
22.102(Closed water heaters)	-	500	-
22.103(Addition)	-	500	-
22.104(Addition)	-	500	-
22.105(Cistern-type water heaters)	-	500	-
22.109(Addition)	-	500	-
25(Supply connection and external flexible cords)	-	700	-
26(Terminals for external conductors)	-	800	-
27(Provision for earthing)	-	1000	-
28(Screws and connections)	-	1000	-

08 Sep, 2028

-
Exclusion: Cl.19.11.4.1 to Cl.19.11.4.7 (EMI/EMC), Cl.15(IPX9), Cl.22.16(Auto Cord Reel Test), Cl.24(Components), Cl.22.46(Software Test), 32.2(Radiation Hazards)

2937

INTERNATIONAL TESTING AND COMPLIANCE (OPC) PRIVATE LIMITED

8188026

IS 4250 (2025)

Electric Food-Mixers (Liquidizers and Grinders) and Centrifugal Juicers ï¿½ Specification ( Second Revision )

40000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4(General Requirements)	-	500	-
Cl-5(General Conditions for the tests)	-	1000	-
Cl-6(Classification)	-	1000	-
Cl-7(Marking)	-	1500	-
Cl-8(Safety Requirements)	-	1000	-
Cl-9(Endurance fpr motor and base assembly)	-	2000	-
Cl-10.2("Grinding Coffee (for Machines that Have a Dry Grinding Arrangement)")	-	2000	-
Cl-10.3(Whisking Egg Whites (for Machines that have Whisking Egg Arrangement))	-	2000	-
Cl-10.4(Idli Batter)	-	2000	-
Cl-10.5(Operational Tests for Juicers)	-	2000	-
Cl-11(Temperature Withstand Test for Bowl)	-	1500	-
Cl-12.1(Test for Switches)	-	1800	-
Cl-13(Strength of Assembly)	-	1500	-
Cl-14.2, 14.3 Table-2 (i)(Protection against access to live parts)	-	1800	-
Cl-14.2, Table-2 (ii)(Power input and current)	-	1200	-
Cl-14.2, 14.3 Table-2 (iii)(Leakage current and electric strength at operating temperature)	-	1500	-
Cl-14.2, Table-2 (iv)(Moisture resistance)	-	1800	-
Cl-14.2, Table-2 (v)(Leakage current and electric strength)	-	1800	-
Cl-14.2, 14.3 Table-2 (vi)(Provision for earthing)	-	1500	-

08 Sep, 2028

-
Exclusion: 19.11.4.1 to 19.11.4.7 (EMI/EMC)

2938

INTERNATIONAL TESTING AND COMPLIANCE (OPC) PRIVATE LIMITED

8188026

IS 2082 (2018)

Stationary storage type electric water heaters - Specification (Fifth Revision)

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking)	-	500	-
7(Marking)	-	500	-
7(Marking)	-	500	-
7(Marking)	-	500	-
7(Marking)	-	500	-
7(Marking)	-	500	-
7(Marking)	-	500	-
7(Marking)	-	500	-
7(Marking)	-	500	-
7(Marking)	-	500	-
7(Marking)	-	500	-
7(Marking)	-	500	-
7(Marking)	-	500	-
7(Marking)	-	500	-
7(Marking)	-	500	-
7(Marking)	-	500	-
7(Marking)	-	500	-
7(Marking)	-	500	-
7(Marking)	-	500	-
7(Marking)	-	500	-
7(Marking)	-	500	-
7(Marking)	-	500	-
7(Marking)	-	500	-
7(Marking)	-	500	-
7(Marking)	-	500	-
7(Marking)	-	500	-
7(Marking)	-	500	-
7(Marking)	-	500	-
6(Classification )	-	500	-
6(Classification )	-	500	-
(Cl.8 of IS 302-2-21:2011)(Protection Against Access to Live Parts)	-	500	-
(Cl.10 of IS 302-2-21: 2011)(Power Input & Current)	-	500	-
(Cl.11 of 302-2-21:2011)(Heating)	-	500	-
(Cl.11 of 302-2-21:2011)(Heating)	-	500	-
(Cl.11 of 302-2-21:2011)(Heating)	-	500	-
(Cl.13 of IS 302-2-21:2011)(Leakage Current )	-	500	-
(Cl.13 of IS 302-2-21:2011)(Electrical Strength at Operating Temperature)	-	500	-
(Cl.14ofIS302-2-21:2011)(Transient Over Voltages)	-	500	-
(Cl.15 of IS 302-2-21-2011)(Moisture Resistance)	-	500	-
(Cl.15 of IS 302-2-21-2011)(Moisture Resistance)	-	500	-
(Cl.15 of IS 302-2-21-2011)(Moisture Resistance)	-	500	-
(Cl.17 of IS 302-2-21:2011)(Overload protection of transformers & associated circuits)	-	500	-
(Cl.19 of IS 302-2-21:2011)(Abnormal Operation)	-	500	-
(Cl.19 of IS 302-2-21:2011)(Abnormal Operation)	-	500	-
(Cl.19 of IS 302-2-21:2011)(Abnormal Operation)	-	500	-
(Cl.19 of IS 302-2-21:2011)(Abnormal Operation)	-	500	-
(Cl.20 of IS 302-2-21:2011)(Stability & Mechanical Hazards)	-	500	-
(Cl.21ofIS302-2-21:2011)(Mechanical strength)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	500	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	500	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	500	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	500	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	500	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	500	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	500	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	500	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	500	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	500	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	500	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	500	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	500	-
(Cl.24ofIS302-221:2011)(Component)	-	500	-
(Cl.24ofIS302-221:2011)(Component)	-	500	-
(Cl.24ofIS302-221:2011)(Component)	-	500	-
(Cl.24ofIS302-221:2011)(Component)	-	500	-
(Cl.24ofIS302-221:2011)(Component)	-	500	-
(Cl.24ofIS302-221:2011)(Component)	-	500	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	500	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	500	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	500	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	500	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	500	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	500	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	500	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	500	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	500	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	500	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	500	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	500	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	500	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	500	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	500	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	500	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	500	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	500	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	500	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	500	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	500	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	500	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	500	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	500	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	500	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	500	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	500	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	500	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	500	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	500	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	500	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	500	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	500	-
(Cl.27 of IS 302-2-21:2011)(Provision for Earthing)	-	500	-
(Cl.27 of IS 302-2-21:2011)(Provision for Earthing)	-	500	-
(Cl.27 of IS 302-2-21:2011)(Provision for Earthing)	-	500	-
(Cl.27 of IS 302-2-21:2011)(Provision for Earthing)	-	500	-
(Cl.27 of IS 302-2-21:2011)(Provision for Earthing)	-	500	-
(Cl.27 of IS 302-2-21:2011)(Provision for Earthing)	-	500	-
(Cl.28 of IS 302-2-21:2011)(Screws & Connections)	-	500	-
(Cl.29ofIS302-2-21:2011)(Clearances, Creepage Distances and Solid Insulation)	-	500	-
(Cl.30 of IS 302-2-21:2011)(Resistance to Heat & Fire)	-	500	-
(Cl.30 of IS 302-2-21:2011)(Resistance to Heat & Fire)	-	500	-
(Cl.31 of IS 302-2-21:2011)(Resistance to Rusting)	-	500	-
(Cl.15 of IS 2082:2018)(Verification of the Rated Capacity)	-	1000	-
(Cl.16 of IS 2082:2018)(Standing Loss per 24 Hours)	-	1000	-
(Cl.17 of IS 2082:2018)(Hot Water Output)	-	1000	-
(Cl.18 of IS 2082:2018)( Reheating Time)	-	1000	-
(Cl.19 of IS 2082:2018)(Mixing Factor)	-	1000	-
(Cl.20 of IS 2082:2018)(Deviation of Dial Calibration)	-	1000	-
(Cl.21 of IS 2082:2018)(Cyclic Temperature Variation)	-	1000	-
(Cl.22 of IS 2082:2018)(Finish)	-	1000	-
Cl.22 of IS 2082:2018(Finish)	-	1000	-
Cl.21 of IS 2082:2018(Cyclic Temperature Variation)	-	1000	-
Cl.20 of IS 2082:2018(Deviation of Dial Calibration)	-	1000	-
Cl.19 of IS 2082:2018(Mixing Factor)	-	1000	-
Cl.18 of IS 2082:2018( Reheating Time)	-	1000	-
Cl.17 of IS 2082:2018(Hot Water Output)	-	1000	-
Cl.16 of IS 2082:2018(Standing Loss per 24 Hours)	-	1000	-
Cl.15 of IS 2082:2018(Verification of the Rated Capacity)	-	1000	-
Cl.31 of IS 302-2-21:2018(Resistance to Rusting)	-	500	-
Cl.30.2 of IS 302-1:2008(Resistance to Heat & Fire : Glow wire test )	-	500	-
Cl.30.1 of IS 302-1:2008(Resistance to Heat & Fire : Ball pressure test )	-	500	-
Cl.29.2 of IS 302-1:2008(Clearances, Creepage Distances and Solid Insulation : Creepage distance )	-	500	-
Cl.29.1 of IS 302-1:2008(Clearances, Creepage Distances and Solid Insulation : Clearance distance )	-	500	-
Cl.28 of IS 302-2-21:2018(Screws & Connections)	-	500	-
Cl.27.5 of IS 302-1:2008(Provision for Earthing : ECR )	-	500	-
Cl.27 of IS 302-2-21:2018(Provision for Earthing)	-	500	-
Cl.26 of IS 302-2-21: 2018(Terminals for External Conductors)	-	500	-
Cl.25.18 of IS 302-1:2008(Supply Connection & External Flexible Cords)	-	500	-
Cl.25.15 of IS 302-1:2008(Supply Connection & External Flexible Cords : Cord grip test - displacement )	-	500	-
Cl.25.15 of IS 302-1:2008(Supply Connection & External Flexible Cords : Cord grip test )	-	500	-
Cl.25.12 of IS 302-1:2008(Supply Connection & External Flexible Cords : Moulding of supply cord )	-	500	-
Cl.25.10 of IS 302-1:2008(Supply Connection & External Flexible Cords : Colour of Earthing conductor )	-	500	-
Cl.25.8 of IS 302-2-21:2018(Supply Connection & External Flexible Cords : Resistance of supply cord )	-	500	-
Cl.25.5 of IS 302-1:2008(Supply Connection & External Flexible Cords : Type of attachment )	-	500	-
Cl.25 of IS 302-2-21:2018(Supply Connection & External Flexible Cords : connection to the supply mains)	-	500	-
Cl.24.102 of IS 302-221:2018(Component : Operation of thermal cut-out )	-	500	-
Cl.24.101 of IS302-221:2018(Component : Location of non self reseting thermal cut out )	-	500	-
Cl.24of IS 302-221:2018(Component : Relevent Indian standards )	-	500	-
Cl. 23 of IS 302-1:2008(Internal Wiring : color identification for earthing conductor )	-	500	-
Cl. 23 of IS 302-1:2008(Internal Wiring )	-	500	-
Cl.22.111 of IS 302-2-21:2018(Construction : Resistance to vacuum )	-	500	-
Cl.22.110 of IS 302-2-21:2018(Construction : meterial of connections )	-	500	-
Cl.22.110 of IS 302-2-21:2018(Construction : Material of Inner conatiner )	-	500	-
Cl.22.109 of IS 302-2-21:2018(Construction : Drain for appliance having a capacity of more than 15 liter)	-	500	-
Cl.22.108 of IS 302-2-21:2018(Construction : fixing to wall )	-	500	-
Cl.22.107 of IS 302-2-21:2018(Construction : Position of Heating elements and thermal control sensor)	-	500	-
Cl.22.106 of IS 302-2-21:2018(Construction : Operation of thermal cut- out )	-	500	-
Cl.22.104 of IS 302-2-21:2018(Construction : Outlet of open outlet heater )	-	500	-
Cl.22.103 of IS 302-2-21:2018(Construction : Operation of Pressure relieve devices )	-	500	-
Cl.22.102 of IS 302-2-21:2018(Construction : repeated drawing of water temp )	-	500	-
Cl.22.101 of IS 302-2-21:2018(Construction : rated pressure of closed water heater )	-	500	-
Cl.22.47 of IS 302-2-21:2018 (Construction : Water pressure test )	-	500	-
Cl.22.44 of IS 302-1:2008(Construction : Shape and decoration of enclosure)	-	500	-
Cl.22.34, Cl 22.35 of IS 302-1:2008(Construction : Shaft of operating Knobs )	-	500	-
Cl.22.33 of IS 302-1:2008(Construction : Direct contact of liquids )	-	500	-
Cl 22.26 ,Cl.22.28, Cl 22.29, Cl 22.30 , Cl 22.31, Cl 22.32 of IS 302-1:2008(Construction : Supplymentry/ double / reinforced insulation for Class II/ Class III appliance )	-	500	-
Cl.22.18 Of IS 302-1:2008(Construction : Resistance to corrosion )	-	500	-
Cl.22.17 of IS 302-1:2008(Construction : Spacers )	-	500	-
Cl.22.14 of IS 302-1:2008(Construction : ragged or sharp edges)	-	500	-
Cl.22.12 of IS 302-1:2008(Construction : Fixing of Handle, knob, grips, levers and similar parts)	-	500	-
Cl.22.11 of IS 302-1:2008(Construction : Fixing of non detachable part )	-	500	-
Cl.22.7 of IS 302-1:2008(Construction: adequate safeguards against the risk of excessive pressure)	-	500	-
Cl.22.6 of IS 302-2-21:2018(Construction : Size of drain hole )	-	500	-
Cl.22.6 of IS 302-1:2008(Construction : Effect of water on 3 insulation )	-	500	-
Cl.22.2 of IS 302-1:2008(Construction : Provision to ensure all pole disconnection )	-	500	-
Cl.22.1 of IS 302-1:2008(Construction : IP test )	-	500	-
Cl.21.2 of IS 302-1:2008(Mechanical strength : prevent penetration by sharp implements. )	-	500	-
Cl.21.1 of IS 302-1:2008(Mechanical strength : Rough handling in normal use)	-	500	-
Cl.20 of IS 302-1:2008(Stability & Mechanical Hazards)	-	500	-
Cl.19 of IS 302-2-21:2018(Abnormal Operation : leakage from container during test)	-	500	-
Cl.19 of IS 302-2-21:2018(Abnormal Operation : High Voltage )	-	500	-
Cl.19 of IS 302-2-21:2018(Abnormal Operation : Insulation of the supply cable or cord)	-	500	-
Cl.19 of IS 302-2-21:2018(Abnormal Operation : Wall ceiling temp. of test corner )	-	500	-
Cl.19 of IS 302-2-21:2018(Abnormal Operation : emission of flame or molten metal or poisonous or ignitable gas )	-	500	-
Cl.16 of IS 302-2-21-2018(Leakage current and Electric strength (After humidity): Electric Strentgh )	-	500	-
Cl.16 of IS 302-2-21-2018(Leakage current and Electric strength (After humidity): Leakage current )	-	500	-
Cl.15 of IS 302-2-21-2018(Moisture Resistance)	-	500	-
Cl.14 of IS 302-2-21:2018(Transient Over Voltages)	-	500	-
Cl.13 of IS 302-2-21:2018(3 Strength at Operating Temperature)	-	500	-
Cl.13 of IS 302-2-21:2018(Leakage Current )	-	500	-
Cl.11 of 302-2-21:2018(Heating : Room Temp.)	-	500	-
Cl.11 of 302-2-21:2018(Heating : Temp of Rubber or PVC insulation of internal and external wiring)	-	500	-
Cl.11 of 302-2-21:2018(Heating : Temp of Walls, ceilings and floor of the test corner )	-	500	-
Cl.10 of IS 302-2-21: 2018(Power Input & Current)	-	500	-
Cl.8 of IS 302-2-21:2018(Protection Against Access to Live Parts)	-	500	-
7.101(Marking : Indifiction of water inlet and water outlet )	-	500	-
7.14(Marking : Legibility and durability)	-	500	-
7.13(Marking : Official language of Instruction )	-	500	-
7.11(Marking : Indication of controls )	-	500	-
7.8(Marking : Terminals )	-	500	-
7.1(Marking: Name, trademark or identification mark of manufacturer )	-	500	-
7.1(Marking : Rated power input)	-	500	-
7.1(Marking : Symbol for nature of supply )	-	500	-
7.1(Marking : Rated Voltage )	-	500	-
Cl.32 of IS 302-1:2008()	-	500	-
4(GENERAL REQUIREMENT)	-	500	-
5(GENERAL CONDITIONS FOR THE TESTS)	-	500	-
12(THERMOSTAT SETTING)	-	500	-
Cl-10(Mounting of the water heater)	-	500	-
Cl-11(Measurements of stored water temperature)	-	500	-
Cl-12(Thermostat setting)	-	1000	-
Cl-13(Measurement of energy consumption)	-	1000	-
Cl-14(Verification of the rated capacity)	-	1000	-
(Cl.22 of IS 302-2-21:2018)(Constructions)	-	500	-
(Cl.22 of IS 302-2-21:2018)(Constructions)	-	500	-
(Cl.22.108 of IS 302-2-21:2018)(Constructions)	-	500	-
(Cl.22.6 of IS 302-2-21:2018)(Constructions)	-	500	-
(Cl.22.47 of IS 302-2-21:2018)(Constructions)	-	500	-
(Cl.22.47 of IS 302-2-21:2018)(Constructions)	-	500	-
(Cl.22.47 of IS 302-2-21:2018)(Constructions)	-	500	-
(Cl.22.47 of IS 302-2-21:2018)(Constructions)	-	500	-
(Cl.22.47 of IS 302-2-21:2018)(Constructions)	-	500	-
(Cl.22.101 of IS 302-2-21:2018)(Constructions)	-	500	-
(Cl.22.105 of IS 302-2-21:2018)(Constructions)	-	500	-
(Cl.22.101 of IS 302-2-21:2018)(Constructions)	-	500	-
(Cl.22.103 of IS 302-2-21:2018)(Constructions)	-	500	-
(Cl.22.104 of IS 302-2-21:2018)(Constructions)	-	500	-
(Cl.22.104 of IS 302-2-21:2018)(Constructions)	-	500	-
(Cl.22.105 of IS 302-2-21:2018)(Constructions)	-	500	-
(Cl.22.109 of IS 302-2-21:2018)(Constructions)	-	500	-
(Cl.24.101 of IS 302-2-21:2018)(Components)	-	500	-
(Cl.25 of IS 302-2-21:2018)(Supply Connection and External Flexible cords)	-	500	-
7.6(Marking : Symbol used )	-	500	-
7.1(Marking : Warning for Open- outlet )	-	500	-
7.1(Marking : Statement for pressure reducing valve ( For rated pressure less than 0.6 MPa))	-	500	-
7.1(Marking : Statement for a pressure-relief device)	-	500	-
7.1(Marking : Rated capacity)	-	500	-
7.1(Marking : Rated pressure)	-	500	-
7.1(Marking : Country of manufacture)	-	500	-
7.1(Marking: IP Number)	-	500	-
7.1(Marking: Symbol for Class II)	-	500	-
7.1(Marking: Model or type reference)	-	500	-

08 Sep, 2028

-
Exclusion: Cl.19.11.4.1 to Cl.19.11.4.7 (EMI/EMC), Cl.15(IPX9), Cl.24(Components)

2939

INTERNATIONAL TESTING AND COMPLIANCE (OPC) PRIVATE LIMITED

8188026

IS 302 : Part 2 : Sec 14 (2009)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 14 electric kitchen machines (First Revision)

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Classification- IS 302-1 )	-	100	-
6(Classification- IS 302-1)	-	100	-
7.1(Marking- IS 302-1)	-	200	-
7.1(Marking- IS 302-1)	-	200	-
7.1(Marking- IS 302-1)	-	200	-
7.1(Marking- IS 302-1)	-	200	-
7.1(Marking- IS 302-1)	-	200	-
7.1(Marking- IS 302-1)	-	200	-
7.1(Marking- IS 302-1)	-	200	-
7.1(Marking- IS 302-1)	-	200	-
7.6(Marking- IS 302-1)	-	200	-
7.8(Marking- IS 302-1)	-	200	-
7.11(Marking- IS 302-1)	-	500	-
7.12(Marking- IS 302-1)	-	500	-
7.13(Marking- IS 302-1)	-	500	-
7.14(Marking- IS 302-1)	-	500	-
7.15(Marking- IS 302-1)	-	100	-
7.101(Marking)	-	100	-
8( Protection Against Electric Shock, IS 302-1)	-	800	-
10(Power Input and Current, IS 302-1)	-	1200	-
11(Heating, IS 302-1)	-	1500	-
11(Heating, IS 302-1)	-	1500	-
11(Heating, IS 302-1)	-	1500	-
11(Heating, IS 302-1)	-	1500	-
11(Heating, IS 302-1)	-	1500	-
13(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	1000	-
13(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	1000	-
14(Transient Over Voltages, IS 302-1)	-	1000	-
15.1(Moisture Resistance, IS 302-1)	-	1200	-
15.2(Moisture Resistance, IS 302-1)	-	1200	-
15(Moisture Resistance, IS 302-1)	-	1200	-
16(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	800	-
16(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	800	-
17(Overload protection of Transformers and Associated Circuits, IS 302-1)	-	1000	-
17(Overload protection of Transformers and Associated Circuits, IS 302-1)	-	1000	-
19.7(Abnormal Operation, IS 302-1)	-	500	-
19.8(Abnormal Operation, IS 302-1)	-	500	-
19.9(Abnormal Operation, IS 302-1)	-	500	-
19.1(Abnormal Operation, IS 302-1)	-	500	-
19.101(Abnormal Operation)	-	500	-
19.102(Abnormal Operation)	-	500	-
20.1(Stability & Mechanical Hazards, IS 302-1)	-	1200	-
20.2(Stability & Mechanical Hazards, IS 302-1)	-	1000	-
20.101(Stability & Mechanical Hazards)	-	1000	-
20.102(Stability & Mechanical Hazards)	-	1000	-
20.103(Stability & Mechanical Hazards)	-	1000	-
20.104(Stability & Mechanical Hazards)	-	500	-
20.105(Stability & Mechanical Hazards)	-	500	-
20.106(Stability & Mechanical Hazards)	-	500	-
20.107(Stability & Mechanical Hazards)	-	500	-
20.108(Stability & Mechanical Hazards)	-	500	-
20.109(Stability & Mechanical Hazards)	-	500	-
20.110(Stability & Mechanical Hazards)	-	500	-
20.111(Stability & Mechanical Hazards)	-	500	-
20.112(Stability & Mechanical Hazards)	-	500	-
20.113(Stability & Mechanical Hazards)	-	500	-
20.114(Stability & Mechanical Hazards)	-	500	-
20.115(Stability & Mechanical Hazards)	-	500	-
20.116(Stability & Mechanical Hazards)	-	500	-
21.1(Mechanical Strength, IS 302-1)	-	500	-
21.2(Mechanical Strength, IS 302-1)	-	500	-
22(Construction, IS 302-1)	-	100	-
22.101(Construction)	-	100	-
22.102(Construction)	-	100	-
23.1(Internal Wiring, IS 302-1)	-	500	-
23.2(Internal Wiring, IS 302-1)	-	500	-
23.3(Internal Wiring, IS 302-1)	-	500	-
23.4(Internal Wiring, IS 302-1)	-	500	-
23.5(Internal Wiring, IS 302-1)	-	500	-
23.6(Internal Wiring, IS 302-1)	-	500	-
23.7(Internal Wiring, IS 302-1)	-	500	-
23.8(Internal Wiring, IS 302-1)	-	500	-
23.9(Internal Wiring, IS 302-1)	-	500	-
23.10(Internal Wiring, IS 302-1)	-	500	-
24.1(Components, IS 302-1)	-	500	-
24.2(Components, IS 302-1)	-	500	-
24.5(Components, IS 302-1)	-	500	-
24.6(Components, IS 302-1)	-	500	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	800	-
25.5(Supply Connection and External Flexible Cords, IS 302-1)	-	800	-
25.6(Supply Connection and External Flexible Cords, IS 302-1)	-	800	-
25.7(Supply Connection and External Flexible Cords, IS 302-1)	-	800	-
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	800	-
26.9(Supply Connection and External Flexible Cords, IS 302-1)	-	800	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	800	-
25.11(Supply Connection and External Flexible Cords, IS 302-1)	-	800	-
25.12(Supply Connection and External Flexible Cords, IS 302-1)	-	800	-
25.13(Supply Connection and External Flexible Cords, IS 302-1)	-	800	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	800	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	800	-
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	800	-
25.16(Supply Connection and External Flexible Cords, IS 302-1)	-	800	-
25.17(Supply Connection and External Flexible Cords, IS 302-1)	-	800	-
25.18(Supply Connection and External Flexible Cords, IS 302-1)	-	800	-
25.19(Supply Connection and External Flexible Cords, IS 302-1)	-	800	-
25.2(Supply Connection and External Flexible Cords, IS 302-1)	-	800	-
25.21(Supply Connection and External Flexible Cords, IS 302-1)	-	800	-
25.22(Supply Connection and External Flexible Cords, IS 302-1)	-	800	-
26(Terminals for External Conductors, IS 302-1)	-	800	-
27(Provision for Earthing, IS 302-1)	-	1000	-
27.2(Provision for Earthing, IS 302-1)	-	1000	-
27.3(Provision for Earthing, IS 302-1)	-	1000	-
27.4(Provision for Earthing, IS 302-1)	-	1000	-
27.5(Provision for Earthing, IS 302-1)	-	1000	-
28(Screws & Connections, IS 302-1)	-	1000	-
29.1(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	1200	-
29.2(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	1200	-
30.1(Resistance to Heat and Fire, IS 302-1)	-	1000	-
30.2(Resistance to Heat and Fire, IS 302-1)	-	1500	-
31(Resistance of Rusting, IS 302-1)	-	1200	-
32(Radiation, Toxicity and similar Hazard IS 302-1)	-	500	-
4(GENERAL REQUIREMENTS)	-	100	-
5(GENERAL CONDITIONS FOR THE TESTS)	-	100	-
27(Provision for Earthing)	-	800	-
29(Clearances, Creepage distances and Solid Insulation)	-	1200	-
7.3(Marking- IS 302-1)	-	500	-
7.4(Marking- IS 302-1)	-	500	-
7.7(Marking- IS 302-1)	-	500	-

08 Sep, 2028

-
Exclusion: Cl.19.11.4.1 to Cl.19.11.4.7 (EMI/EMC), Cl.15(IPX9), Cl.25.7(PVC Test), Cl.24(Components)

2940

Rajkot Metlab Services LLP, Rajkot

7183706

IS 17876 (2022)

Stainless steel welded pipes and tubes for general service

15500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.0 (Table No.- 1)(Chemical Composition,% - IS 228)	-	1500	-
10.1 (Table No.- 4)(Tensile Test,Mpa)	-	1000	-
11(Transverse Tension Test,%)	-	1000	-
12 (Table No.- 5)(Hardness Test,HRC,HRB&BHN- IS 1500 (Part 1) or IS 1586 (Part 1))	-	500	-
13 (Table No.- 7)(Flange Test-IS 2330)	-	1000	-
14(Reverse Flattaning Test)	-	1000	-
15(Flattaning Test-IS 2328)	-	1000	-
16 (Table No.- 8)(Grain Size,No.-IS 4748)	-	1500	-
18(Leak Tighteness Test)	-	1500	-
19("Corrosion Test-IS 10461 (Part 1) or IS 10461 (Part 2)")	-	2500	-
20(Eddy current test, Air under water test ,Radiographic tests)	-	1500	-
22(Workmanship, Finish and Appearance)	-	100	-
23(Repair by Welding or Grinding)	-	100	-
24 (Table No.- 9,10&11)(Dimensions and Tolerances,mm)	-	100	-
"Clause 8.1 and 8.2 - Table 1"(Carbon)	-	500	-
"Clause 8.1 and 8.2 - Table 1"(Silicon)	-	500	-
"Clause 8.1 and 8.2 - Table 1"(Mangnese)	-	500	-
"Clause 8.1 and 8.2 - Table 1"(Nickel)	-	500	-
"Clause 8.1 and 8.2 - Table 1"(Chromium)	-	500	-
"Clause 8.1 and 8.2 - Table 1"(Molybdenum)	-	500	-
"Clause 8.1 and 8.2 - Table 1"(Sulphur)	-	500	-
"Clause 8.1 and 8.2 - Table 1"(Phosphorous)	-	500	-
"Clause 8.1 and 8.2 - Table 1"(Nitrogen)	-	500	-
"Clause 8.1 and 8.2 - Table 1"(Copper)	-	500	-
"Clause 8.1 and 8.2 - Table 1"(Aluminium)	-	500	-
"Clause 8.1 and 8.2 - Table 1"(Titanium)	-	500	-
"Clause 8.1 and 8.2 - Table 1"(Niobium)	-	500	-
"Clause 19 IS 10461(Part 1)"(Corrosion Test)	-	2500	-
Clause 10.1 - Table 4(Tensile Strength)	-	1500	-
Clause 10.1 - Table 4(Yield Strength)	-	1500	-
Clause 10.1 - Table 4(Percent Elongation)	-	1500	-
Clause 11(Transverse Tension Test)	-	1500	-
Clause 12(Hardness Test)	-	1000	-
Clause 13(Flange Test)	-	1500	-
Clause 14(Reverse Flattening Test)	-	1500	-
Clause 15(Flattening Test)	-	1500	-
Clause 16(Grain Size)	-	1500	-
Clause 18()	-	1500	-
"Clause 19 IS 10461(Part 2)"(Corrosion Test)	-	2500	-
Clause 22(Workmanship, Finish & Appearance)	-	200	-
Clause 24 Annexure A, Table 9 Table 10(Dimensions & Tolerances)	-	200	-
8.1 & 8.2 (Table No.- 1)(Vanadium (V))	-	500	-
8.1 & 8.2 (Table No.- 1)(Tungstun (W))	-	500	-
8.1 & 8.2 (Table No.- 1)(Tantalum (Ta))	-	500	-
12.2(Hardness test)	-	1000	-
17(Sampling)	-	100	-
25(Marking)	-	100	-
6.7, Table 7, ii)(c) Chromium VI)	-	500	-

12 Jan, 2028

-
Included w.e.f 20.06.2025

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number