BIS - LIMS (Laboratory Information Management System)

Aaditech Test and Calibration Lab LLP

Plot No. 5, Block-R, Kh.No. 38/16, Street No.4, Rama Vihar- Village Karala, Rohini, North West, Delhi, 110081

8860402469 aaditechtestlab@gmail.com

Scope List

Reset

62 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

IS 14255 (1995)

Aertal bunched cables - For working voltages up to and including 1100 Volts - Specification

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Phase/Street Lighting conductor)	-	100	-
4.2(Messenger (Neutral Conductor or Otherwise))	-	100	-
5.1(Insulation)	-	100	-
6.1(Flexibility class)	-	100	-
6.2(Compactness)	-	100	-
6.2(No of strands)	-	100	-
6.2(Surface)	-	100	-
6.3(Protective barrier)	-	100	-
6.4(size of street lighting conductor)	-	100	-
6.5(Size of messenger conductor )	-	100	-
6.6(Joints in messenger conductor )	-	100	-
6.6(Direction of outer layer)	-	100	-
7.1(Insulation)	-	100	-
7.2( Thickness of insulation)	-	500	-
7.3(Tolerance on thickness of insulation )	-	200	-
7.4(Aplication of the insulation )	-	100	-
7.5(Colour of the insulation )	-	100	-
8.1(Core identification)	-	100	-
8.2(Core identification)	-	100	-
8.3(Identification by other means)	-	100	-
9.1(Assembly (Laying up))	-	200	-
9.2(Assembly (Laying up))	-	200	-
9.3(Direction of lay)	-	200	-
10.1 a) i)(Tests on phase/street light conductor: tensile test - Test method IS10810:Part 2)	-	500	-
10.1 a) ii)(Wrapping test - 10810: Part 3)	-	500	-
10.1 a) iii)(Resistance test - IS10810: Part 5)	-	500	-
10.1 b) i)(Test on messenger conductor: Breaking load - IS 10810: Part 2)	-	500	-
10.1 b) ii)(Test on messenger conductor: Elongation test - Cl 11.3)	-	500	-
10.1 b) iii)(Test on messenger conductor: Resistance test - IS 10810: Part 5)	-	500	-
10.1 c) i)(Physical tests for XLPE Insulation: Tensile strength - IS 10810: Part 7)	-	500	-
10.1 c) i)(Physical tests for XLPE Insulation: elongation at break - IS 10810: part 7)	-	500	-
10.1 c) ii)(Ageing in air oven : Tensile strength variation - IS 10810:Part 11)	-	500	-
10.1 c) ii)(Ageing in air oven : Elongation variation- IS 10810: Part 11)	-	500	-
10.1 c) iii)(Hot set test: Elongation under load - IS 10810: Part 30)	-	500	-
10.1 c) iii)(Hot set test: Permanent elongation (set) after cooling - IS 10810: Part 30)	-	500	-
10.1 c) iv)(Shrinkage test : Shrinkage - 10810:Part 12)	-	500	-
10.1 c) iv)(Shrinkage test : Crack Observed - 10810:Part 12)	-	500	-
10.1 c) v)(Water ahsorption (Gravimetric) - IS 10810: Part 33 )	-	500	-
10.1 d) i)(Physical test for PE insulation: Tensile strength - IS 10810: Part 7 )	-	500	-
10.1 d) i)(Physical test for PE insulation: elongation at break - IS 10810: Part 7)	-	500	-
10.1 d) ii)(Melt flow index- IS 10810: Part 23)	-	500	-
10.1 d) iv)(Vicat softening point -IS 10810: Part 22)	-	500	-
10.1 d) v)(Environmental stress cracking -IS 10810:Part29)	-	500	-
10.1 f)(Insulation resistance (Volume resistivity) test a) volume resistivity at 27°C - IS 10810: Part 43)	-	500	-
10.1 f)(Insulation resistance (Volume resistivity) test b) volume resistivity at 70°C - IS 10810: Part 43)	-	500	-
10.1 g)(High voltage test - IS10810:Part 45)	-	500	-
11.4(Bending Test on the Completed Cable ( Optional) )	-	500	-
11.4(Bending Test on the Completed Cable ( Optional))	-	500	-
10.1 d) iii)(Carbon Black Content)	-	500	-

-
-

IS 17048 (2018)

Halogen free flame retardant (HFFR) cables for working voltages up to and including 1 100 Volts - Specification

1100

180000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1.1 a) (Conductor : Material )	-	1000	-
4.1.1 b) (Material : Seperator tape )	-	1000	-
4.1.1 d) , 11.1, 12.1, 13.1,14.1(Class of conductor )	-	1000	-
4.1.1 e) (Shape of conductor )	-	1000	-
4.1.1 f) (Nominal size of conductor )	-	1000	-
4.2.1, 11.2, 12.2, 13.2, 14.2(Insulation : Material )	-	1000	-
4.2.2, 11.2, 12.2, 13.2, 14.2(Insulation : Application )	-	1000	-
4.2.3,11.2, 12.2, 13.2(Thickness of insulation - Avearge : IS 10810 ( Part 6 ))	-	1000	-
4.2.3, 11.2, 12.2, 13.2, 14.2(Thickness of insulation - miniumum : IS 10810 ( Part 6 ))	-	1000	-
4.2.4(Insulation : Tensile stregth ( Before ageing)-IS 10810 (Part 7) )	-	1000	-
4.2.4(Insulation : Elongation ( Before ageing) -IS 10810 (Part 7))	-	1000	-
4.2.4(Insulation : Tensile stregth ( After ageing) - IS 10810 (Part 7) )	-	1000	-
4.2.5(Insulation : Tensile stregth variation ( After ageing) - IS 10810 (Part 7) )	-	1000	-
4.2.4(Insulation : Elongation (after ageing) - IS 10810 (Part 7) )	-	1000	-
4.2.5(Insulation : Elongation variation (after ageing) - IS 10810 (Part 7) )	-	1000	-
4.3(Fillers)	-	1000	-
4.4(Binder Tape)	-	1000	-
4.5.1,13.4, 14.4(Sheath : Compound )	-	1000	-
4.5.2, 13.4, 14.4(Sheath : Application)	-	1000	-
4.5.3,13.4, 14.4(Thickness of sheath - Average : IS 10810 (Part 6))	-	1000	-
4.5.3,13.4, 14.4(Thickness of sheath - Minimum : IS 10810 (Part 6))	-	1000	-
4.5.4, 13.4(Sheath : Tensile stregth ( Before ageing)-IS 10810 (Part 7) )	-	1000	-
4.5.4,13.4(Sheath : Elongation ( Before ageing) -IS 10810 (Part 7))	-	1000	-
4.5.4, 13.4, 14.4(Sheath : Tensile stregth ( After ageing) - IS 10810 (Part 7) )	-	1000	-
4.5.5, 13.4, 14.4(Sheath : Tensile stregth variation ( After ageing) - IS 10810 (Part 7) )	-	1000	-
4.5.4, 13.4, 14.4(Sheath : Elongation (after ageing) - IS 10810 (Part 7) )	-	1000	-
4.5.5, 13.4,14.4(Sheath : Elongation variation (after ageing) - IS 10810 (Part 7) )	-	1000	-
4.5.5, 11.3, 12.3, 13.6, 14.6(Overall Dimensions)	-	1000	-
4.5.5.1, 11.3, 12.3,13.5, 14.5(Ovality)	-	1000	-
4.5.6, 13.4(Colour of Sheath)	-	1000	-
5.1(High Voltage Test (at Room Temperature))	-	1000	-
5.3(Flammability Test- IS 10810 (Part 53).)	-	1000	-
5.4(Oxygen Index Test- IS 10810 (Part 58))	-	1000	-
5.5(Temperature Index-IS 10810 (Part 64).)	-	1000	-
5.6(Smoke Density-IS 10810 (Part 63).)	-	1000	-
5.7(Assessment of Halogen- Table 1 of Annex D)	-	1000	-
5.1(Persulphate Test- IS 10810 (Part 4).)	-	1000	-
5.11(Flame Retardant Test- IS 10810 (Part 61),)	-	1000	-
5.12(Hot Set Test- IS 10810 (Part 30).)	-	1000	-
5.12(Permanent Set - IS 10810 (Part 30).)	-	1000	-
5.13(Water Immersion Test (Effect of Water on Sheath) : Tensile strength -IS 10810 (Part 7).)	-	1000	-
5.13(Water Immersion Test (Effect of Water on Sheath) : Elogation -IS 10810 (Part 7).)	-	1000	-
5.14(Ozone Resistance Test -IS 10810 (Part 13 ))	-	1000	-
5.15(Cold Bend Test-IS 10810 (Part 20).)	-	1000	-
5.16(Cold Impact Test- IS 10810 (Part 21).)	-	1000	-
6.1, Table 1(CORE IDENTIFICATION)	-	1000	-
6.2(Core Identification by Numbers)	-	1000	-
6.2.1(Preferred Arrangement of Marking)	-	1000	-
6.2.2(Durability)	-	1000	-
7.0(CABLE CODE)	-	1000	-
9.0( IDENTIFICATION)	-	1000	-
10.1(Packing )	-	1000	-
10.2(marking)	-	1000	-
10.2.1(Standards marking)	-	1000	-
13.3, 14.3(assembly of cores )	-	1000	-
6.1(General Requirements)	-	1000	-
6.1.1(Colour Combination Green Yellow)	-	1000	-
12.1(Conductor)	-	1000	-
12.2, Table 4(insulation)	-	1000	-
Table 4(Copper Purity test)	-	1000	-
4.3.1 (e)(Fluorine content test (Fillers))	-	1000	-
4.3.1 (d)(Presence of fluorine test (Fillers))	-	1000	-
4.3.1 (c)(Conductivity test (Fillers))	-	1000	-
4.3.1 (b)(pH test (Fillers))	-	1000	-
4.3.1 (a)(HCl test (Fillers))	-	1000	-
5.7 (a)(HCl test (Assessment of halogen test))	-	1000	-
5.7 (b)(pH test (Assessment of halogen test))	-	1000	-
5.7 (c)(Conductivity test (Assessment of halogen test))	-	1000	-
5.7 (d)(Presence of fluorine test (Assessment of halogen test))	-	1000	-
5.7 (e)(Fluorine content test (Assessment of halogen test))	-	1000	-
Table 2 ,( Clause 11.4, 12.4, 13.7 14.7 and 15.7 )(Insulation Resistance)	-	1000	-
"Table 2 ( Clause 11.4, 12.4, 13.7 14.7 and 15.7 )"(Conductor Resistance)	-	1000	-
Table 2 , Clause .5.13(Water immersion test (Effect of water on sheath) - TS Variation of Sheath)	-	1000	-
Table 2 , Clause 5.13(Water immersion test (Effect of water on sheath) - Elongation Variation of Sheath)	-	1000	-
"Table 2 ( Clause 11.4, 12.4, 13.7 14.7 and 15.7 )"(Hot Deformation)	-	1000	-
Table 2, III.a.ii(Annealing test (for Cu, before stranding))	-	1000	-
Table 2, II.a, b(Wrapping test before stranding (for Al))	-	1000	-
5.2(Spark Test (Routine Test))	-	1000	-

-
-

Bureau of Indian Standards

The National Standards Body of India

Aaditech Test and Calibration Lab LLP

Plot No. 5, Block-R, Kh.No. 38/16, Street No.4, Rama Vihar- Village Karala, Rohini, North West, Delhi, 110081

8860402469 aaditechtestlab@gmail.com

Scope List