BIS - LIMS (Laboratory Information Management System)

CENTRAL INSTITUTE OF PETROCHEMICALS ENGINEERING AND TECHNOLOGY (CIPET):CSTS-BHOPAL

G SECTOR, GOVINDPURA INDUSTRIAL AREA, J. K. ROAD, BHOPAL, BHOPAL, Bhopal, Madhya Pradesh, 462023

7869955244 cipet.bhopal@gmail.com

Scope List

Reset

108 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

IS 15351 (2015)

Agro textiles – Laminated high density polyethylene (HDPE) woven geomembrane for water proof lining – Specification (second revision)

196400 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(HDPE Tapes)	-	2050	Nil
3.2(HDPE Fabric)	-	1975	Nil
5(MANUFACTURE)	-	300	Nil
5.1(Lamination)	-	1050	Nil
5.2(Panel Width)	-	250	Nil
5.3(Joints/Seams)	-	200	Nil
5.1.1 and 6.2(Thickness, mm- IS 7016: Part 1)	-	250	Nil
5.1.1 and 6.2(Mass, g/sq m)	-	250	Nil
5.1.1 and 6.2(Dimensions, mm- Annexure A of IS 11652)	-	250	Nil
5.1.1 and 6.2(Length)	-	0	Charges already taken in dimension
5.1.1 and 6.2(Width)	-	0	Charges already taken in dimension
5.1.1 and 6.2(Carbon black content, Percent- IS 2530)	-	925	Nil
5.1.1 and 6.2(Breaking Load on 20 cm X 10 cm Strip, Min )	-	1100	Nil
5.1.1 and 6.2(Before UV exposure IS 13162 (Part 5)	-	1100	Nil
5.1.1 and 6.2(Strain at Maximum load, Percent-IS 13162 (Part 5)	-	1100	Nil
Table-1(Breaking load on 20 × 10 cm strip, N, Min after)	-	1100	Nil
5.1.1 and 6.2( U.V exposure of 1000 h for warp and weft)	-	176000	Rs. 176000/- conditioning charges (25% discount is not applicable in conditioning charges)
5.1.1 and 6.2(Impact failure load, at 1524 mm drop,)	-	1100	Nil
5.1.1 and 6.2( Min, gram force at 50 percent failure-Annex C)	-	1100	Nil
5.1.1 and 6.2(Tear resistance, N, Min-Method A1 of IS 7016 (Part 3))	-	1100	Nil
5.1.1 and 6.2(Puncture resistance, N, Min-Annex D)	-	1100	Nil
5.1.1 and 6.2(Bursting strength (Ball burst),N/cm², Min-)	-	1000	Nil
5.1.1 and 6.2(IS 7016 (Part 6))	-	1100	Nil
5.1.1 and 6.2(Seam strength before UV exposure (N/mm), Min-IS 15060)	-	1100	Nil
Table-1(Seam strength after UV exposure N/mm, Min-Annex B and IS 15060)	-	1100	Nil
5.1.1 and 6.2(Hydrostatic resistance-Annex E)	-	2000	Nil
5.1.1 and 6.2(Ash content, percent, Max-Annex F)	-	950	Nil

31 Dec, 2026

-
-

IS 16208 (2015)

Textiles - High density polyethylene (HDPE)/polypropylene (PP) woven sacks for packaging 10 kg, 15 kg, 20 kg, 25 kg and 30 kg foodgrains - Specification

20580 View breakup
Rs.17155/- (After 25% discount for BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(TYPES)	-	300	Nil
4.1(Raw Material)	-	1050	Nil
4.2(Tapes – Width IS 6192 and IS 11197)	-	250	Nil
4.2(Tapes – Linear Density )	-	500	Nil
4.2(Construction)	-	250	Nil
4.3(Sacks)	-	300	Nil
4.3.1(Bottom Seam)	-	0	Charges already taken in clause no. 4.3
4.3.1( The two rows of stitches shall be separated from each other)	-	0	Charges already taken in clause no. 4.3
4.3.1( The outer stitch)	-	0	Charges already taken in clause no. 4.3
4.3.1( The stitching shall be done with double fold over seam to a depth )	-	0	Charges already taken in clause no. 4.3
4.3.1(Stitches pass through a minimum of six layers of the fabric. )	-	0	Charges already taken in clause no. 4.3
4.3.1(The number of stitches/dm)	-	0	Charges already taken in clause no. 4.3
4.3.2(Mouth)	-	0	Charges already taken in clause no. 4.3
4.4 and Table 1 i(Capacity)	-	250	Nil
5.2 and Table 1 ii a(Dimensions Inside Length)	-	250	Nil
5.2 and Table 1 ii b(Dimensions Inside Width)	-	0	Charges already taken in clause no. 5.2
5.2 and Table 1 iii(Ends per dm )	-	250	Nil
5.2 and Table 1 iv(Picks per dm )	-	250	Nil
5.1 and Table 1 v(Mass of sack )	-	300	Nil
5.2 and Table 1 vi a(Average breaking strength of fabric Lengthwise )	-	1100	Nil
5.2 and Table 1 vi b(Average breaking strength of fabric Widthwise )	-	1100	Nil
5.2 and Table 1 vi(Breaking strength of bottom seam )	-	1100	Nil
5.2 and Table 1 viii a(Elongation at break of fabric Lengthwise)	-	1100	Nil
5.2 and Table 1 viii b(Elongation at break of fabric Widthwise )	-	1100	Nil
5.2 and Table 1 ix(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	10180	Rs. 10180/- Conditioning charges (25% discount is not applicable)
5.2 and Table 1 x(Ash content )	-	950	Nil

31 Dec, 2026

-
Included w.e.f. 29.06.2017.

IS 9537 : Part 4 (1983)

Specification for conduits for electrical installations: Part 4 pliable self - Recovering conduits of insulating materials

9700 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1(Marking, IS 9537-4)	-	300	Nil
6.1(Marking, IS 9537-4)	-	0	Nil
6.1(Marking, IS 9537-4)	-	0	Nil
6.1(Marking, IS 9537-4)	-	0	Nil
6.2(Marking, IS 9537-4)	-	0	Nil
6.2.1(Marking, IS 9537-4)	-	0	Nil
6.3(Marking, Cl. 6.4 of IS 9537-1)	-	0	Nil
7.1(Dimensions, (Minimum outside Diameter), IS 9537-4)	-	1000	Nil
7.1(Dimensions (Maximum outside Diameter), IS 9537-4)	-	0	Charges already taken in clause no. 7.1
7.3.3(Uniformity of wall thickness, IS 9537-4)	-	0	Charges already taken in clause no. 7.1
9.2(Mechanical Properties (Bending test), Cl. 9.3 of IS 9537-1)	-	500	Nil
9.2(Mechanical Properties (Bending test), Cl. 9.3 of IS 9537-1)	-	500	Nil
9.3(Mechanical Properties (Compression Test), IS 9537-4)	-	1100	Nil
9.4(Mechanical Properties (Impact Test), Cl. 9.4 of IS 9537-1)	-	1100	Nil
9.5(Mechanical Properties (Collapse Test), IS 9537-4)	-	1000	Nil
10(Resistance to heat)	-	700	Nil
11(Resistance to burning, Cl. 11 of IS 9537-1)	-	700	Nil
12(Electrical Strength, Cl. 12.1.1 of IS 9537-1)	-	1400	Test charges Rs. 1100/- Plus specimen charges Rs. 300/- (25 % discount is not applicable in specimen charges)
12(Insulation Resistance, Cl. 12.1.2 of IS 9537-1)	-	1400	Test charges Rs. 1100/- Plus specimen charges Rs. 300/- (25 % discount is not applicable in specimen charges)

31 Dec, 2026

-
-

IS 9537 : Part 3 (1983)

Specification for conduits for electrical installations: Part 3 rigid plain conduits of insulating meterials

9700 View breakup
Rs.7425/- (After 25% discount for BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1(Marking)	-	0	Nil
6.2(Durability of Marking as per 6.4 of IS: 9537 (Part 1)-1980)	-	0	Nil
6.3(Standard Mark on Conduit)	-	0	Nil
7.1.1(Maximum and minimum outside diameter of socket)	-	1000	Nil
7.1.1 Table-2(Length of Socket end)	-	0	Charges already taken in clause no. 7.1.1
7.1.2(Maximum and minimum outside diameter of conduit)	-	0	Charges already taken in clause no. 7.1.1
7.2(Minimum inside diameter of conduit)	-	0	Charges already taken in clause no. 7.1.1
7.3(Length of conduit)	-	0	Charges already taken in clause no. 7.1.1
7.4(Unifomity of The wall Thickness)	-	0	Charges already taken in clause no. 7.1.1
8.1(Construction as per clause 8 of IS: 9537 (Part 1)-1980)	-	300	Nil
9.2(Bending Test i) At Room Temp ii) At Low Temp (-5 ±2°C))	-	1000	Nil
9.3(Compression Test as per caluse 9.3 of IS: 9537 (Part 1)-1980)	-	1100	Nil
9.4(Impact Test as per clause 9.4 of IS: 9537 (Part 1)-1980)	-	1100	Nil
9.5(Collapse Test as per clause 9.5 of IS: 9537 (Part 1)-1980)	-	1000	Nil
10(Resistance to Heat -Ball presure test)	-	700	Nil
11(Resistance to burning as per clause 11 of IS: 9537 (Part 1)-1980)	-	700	Nil
12(Electrical Characteristics-Test for electric strength as per clause 12.1.1 of IS: 9537 (Part 1)-1980)	-	1400	Test Charges Rs. 1100/- plus specimen charges Rs. 300/- (25% discount is not applicable in specimen charges)
13(Tests for external influence as per clause 13 of IS: 9537 (Part 1)-1980)	-	1400	Test Charges Rs. 1100/- plus specimen charges Rs. 300/- (25% discount is not applicable in specimen charges)

31 Dec, 2026

-
0.0

IS 9537 : Part 2 (1981)

Specification for conduits for electrical installations: Part 2 rigid steel conduits

4500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1(Marking, IS 9537-2)	-	0	Nil
6.1(Marking, IS 9537-2)	-	0	Nil
6.1(Marking, IS 9537-2)	-	0	Nil
6.3(Marking, Cl. 6.4 of IS 9537-1)	-	0	Nil
6.2(Marking, IS 9537-2)	-	0	Nil
7.2.1(Dimensions, (Minimum outside Diameter), IS 9537-2)	-	1000	Nil
7.2.2(Dimensions (Maximum outside Diameter), IS 9537-2)	-	0	Charges already taken in clause no. 7.2.1
7.3(Dimensions (Wall thickness), IS 9537-2)	-	0	Charges already taken in clause no. 7.2.1
7.3.3(Uniformity of wall thickness, IS 9537-2)	-	0	Charges already taken in clause no. 7.2.1
8.1(Construction, Cl. 8 of IS 9537-1)	-	300	Nil
8.2(Construction, IS 9537-2)	-	0	Charges already taken in clause no. 8.1
9.2(Mechanical Properties (Bending test), Cl. 9.3 of IS 9537-1)	-	1000	Nil
9.3(Mechanical Properties (Compression Test), IS 9537-2)	-	1100	Nil
13(External Influences, IS 9537-2)	-	1100	Nil

31 Dec, 2026

-
-

IS 8521 : Part 1 (1977)

Specification for industrial safety face shields: Part 1 with plastics visor

9450 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 3(General requirements & Specific requirements)	-	250		Nil
Cl 4(Visual and Dimensional Examination & Physical Requirements (Impact Resistance, Penetration Resistance, Visible Transmittance, Flammability & Disinfection))	-	9200		Testing charges Rs. 8950/- plus specimen charges 250/- (25 % discount is not applicable in specimen charges)

31 Dec, 2026

-
Included w.e.f. 27-05-2022.

IS 4985 (2021)

UNPLASTICIZED PVC PIPES FOR POTABLE WATER SUPPLIES SPECIFICATION Fourth Revision

31925 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(CLASSIFICATION OF PIPES)	-	0	Nil
7(DIMENSIONS-PIPE-Nominal Diameter)	-	500	-
7.1.1.1(DIMENSIONS-PIPE-Mean O.D. (Minimum))	-	0	Charges already had taken in clause no. 7
7.1.1.1(DIMENSIONS-PIPE-Mean O.D. (Mamimum))	-	0	Charges already had taken in clause no. 7
7.1.1.1(DIMENSIONS-PIPE-Mean O.D. Variation)	-	0	Charges already had taken in clause no. 7
7.1.1.2(DIMENSIONS-PIPE-O.D. at any Point (Minimum))	-	0	Charges already had taken in clause no. 7
7.1.1.2(DIMENSIONS-PIPE-O.D. at any Point (Maximum))	-	0	Charges already had taken in clause no. 7
7.1.1.2(DIMENSIONS-PIPE-Ovality (Maximum))	-	0	Charges already had taken in clause no. 7
7.1.2.1(DIMENSIONS-PIPE-Thickness(Minimum))	-	0	Charges already had taken in clause no. 7
7.1.2.1(DIMENSIONS-PIPE-Thickness(Maximum))	-	0	Charges already had taken in clause no. 7
7.1.2.1(DIMENSIONS-PIPE-Average Thickness)	-	0	Charges already had taken in clause no. 7
7.2.1(DIMENSIONS-Socket)	-	0	Charges already had taken in clause no. 7
7.2.1(DIMENSIONS-Socket)	-	0	Charges already had taken in clause no. 7
7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Minimum Length)	-	0	Charges already had taken in clause no. 7
7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Diameter at mid point of the socket length (Minimum))	-	0	Charges already had taken in clause no. 7
7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Diameter at mid point of the socket length (Maximum))	-	0	Charges already had taken in clause no. 7
7.2.1.2(a)-Table 5(DIMENSIONS-Sockets for elastomeric sealing ring joints-Minimum depth of engagement)	-	0	Charges already had taken in clause no. 7
7.2.1.2-Table 4(DIMENSIONS-Sockets for elastomeric sealing ring joints-Socket inner Diameter)	-	0	Charges already had taken in clause no. 7
8(SEALING RINGS)	-	0	-
9.1(PIPE ENDS)	-	0	-
9.1(PIPE ENDS)	-	0	Charges already taken in clause no. 7
10.1(PHYSICAL AND CHEMICAL CHARACTERISTICS-Visual Appearance)	-	300	Nil
10.1.1(PHYSICAL AND CHEMICAL CHARACTERISTICS-Visual Appearance)	-	0	Charges already had taken in clause no. 10.1
10.2(PHYSICAL AND CHEMICAL CHARACTERISTICS-Opacity)	-	575	Nil
10.4(PHYSICAL AND CHEMICAL CHARACTERISTICS- Reversion Test)	-	900	Test Charges Rs. 700/- plus Rs. 250 specimen charges (25% discount is not applicable in specimen charges)
10.5(PHYSICAL AND CHEMICAL CHARACTERISTICS- Vicat Softening Temperature)	-	1100	Nil
10.6(PHYSICAL AND CHEMICAL CHARACTERISTICS- Density)	-	500	Nil
11.1-Table 6(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Type Test))	-	11000	Nil
11.1-Table 6(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test))	-	850	Nil
11.1-Table 7(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Type Test)-for Integral Sealing Ring Sockets)	-	5000	Nil
11.1-Table 7(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test)-for Integral Sealing Ring Sockets)	-	850	Nil
11.1.1(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test)-for Plumbing pipes)	-	0	Nil
11.2(Resistance to External Blows at 0°C)	-	1300	Nil
Clause 10.7(Sulphated Ash Content)	-	950	Nil
10.1(Colour)	-	0	-
10.1(Surface Finish)	-	0	nil
7.2.1.1 Table3(Angle of taper (Note-1))	-	0	-
10.7(Sulphated Ash Content)	-	0	The charges had already taken in the No. Clause 10.7
5(CLASSIFICATION OF PIPES)	-	0	-
7(DIMENSIONS-PIPE-Nominal Diameter)	-	0	-
7.1.1.1(DIMENSIONS-PIPE-Mean O.D. (Minimum))	-	0	-
7.1.1.1(DIMENSIONS-PIPE-Mean O.D. Variation)	-	0	-
7.1.1.2(DIMENSIONS-PIPE-O.D. at any Point (Minimum))	-	0	-
7.1.1.2(DIMENSIONS-PIPE-Ovality (Maximum))	-	0	-
7.1.2.1(DIMENSIONS-PIPE-Thickness(Minimum))	-	0	-
7.1.2.1(DIMENSIONS-PIPE-Thickness(Maximum))	-	0	-
7.1.2.1(DIMENSIONS-PIPE-Average Thickness)	-	0	-
7.2.1(DIMENSIONS-Socket)	-	0	-
7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Minimum Length)	-	0	-
7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Diameter at mid point of the socket length (Minimum))	-	0	-
7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Diameter at mid point of the socket length (Maximum))	-	0	-
7.2.1.2(a)-Table 5(DIMENSIONS-Sockets for elastomeric sealing ring joints-Minimum depth of engagement)	-	0	-
7.2.1.2-Table 4(DIMENSIONS-Sockets for elastomeric sealing ring joints-Socket inner Diameter)	-	0	-
8(SEALING RINGS)	-	0	The charges had taken already in clause no. 08.
10.1(PHYSICAL AND CHEMICAL CHARACTERISTICS-Visual Appearance)	-	0	-
10.2(PHYSICAL AND CHEMICAL CHARACTERISTICS-Opacity)	-	0	The charges had already taken in the clause no. 10.2
10.4(PHYSICAL AND CHEMICAL CHARACTERISTICS- Reversion Test)	-	0	The charges had already taken in the clause No. 10.4
10.5(PHYSICAL AND CHEMICAL CHARACTERISTICS- Vicat Softening Temperature)	-	0	The charges had already taken in the clause No. 10.5
10.6(PHYSICAL AND CHEMICAL CHARACTERISTICS- Density)	-	0	The charges had already taken in the clause No. 10.6
11.1-Table 6(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Type Test))	-	0	-
11.1-Table 6(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test))	-	0	-
11.1-Table 7(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Type Test)-for Integral Sealing Ring Sockets)	-	0	-
11.1-Table 7(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test)-for Integral Sealing Ring Sockets)	-	0	-
11.1.1(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test)-for Plumbing pipes)	-	0	-
11.2(Resistance to External Blows at 0°C)	-	0	-
10.3(Effect on Water Test)	-	3000	-
6.1.2(PVC Resin)	-	4100	K value+ VCM content
15.4 (b)(Cold impact)	-	0	-
9.1(PIPE ENDS)	-	0	-
10.1(Colour)	-	0	-
10.1(Surface Finish)	-	0	-
7.2.1.1 Table3(Angle of taper (Note-1))	-	0	-
10.7(Sulphated Ash Content)	-	0	-
5(CLASSIFICATION OF PIPES)	-	0	-
7(DIMENSIONS-PIPE-Nominal Diameter)	-	0	-
7.1.1.1(DIMENSIONS-PIPE-Mean O.D. (Minimum))	-	0	-
7.1.1.1(DIMENSIONS-PIPE-Mean O.D. Variation)	-	0	-
7.1.1.2(DIMENSIONS-PIPE-O.D. at any Point (Minimum))	-	0	-
7.1.1.2(DIMENSIONS-PIPE-Ovality (Maximum))	-	0	-
7.1.2.1(DIMENSIONS-PIPE-Thickness(Minimum))	-	0	-
7.1.2.1(DIMENSIONS-PIPE-Thickness(Maximum))	-	0	-
7.1.2.1(DIMENSIONS-PIPE-Average Thickness)	-	0	-
7.2.1(DIMENSIONS-Socket)	-	0	-
7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Minimum Length)	-	0	-
7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Diameter at mid point of the socket length (Minimum))	-	0	-
7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Diameter at mid point of the socket length (Maximum))	-	0	-
7.2.1.2(a)-Table 5(DIMENSIONS-Sockets for elastomeric sealing ring joints-Minimum depth of engagement)	-	0	-
7.2.1.2-Table 4(DIMENSIONS-Sockets for elastomeric sealing ring joints-Socket inner Diameter)	-	0	-
8(SEALING RINGS)	-	0	-
10.1(PHYSICAL AND CHEMICAL CHARACTERISTICS-Visual Appearance)	-	0	-
10.2(PHYSICAL AND CHEMICAL CHARACTERISTICS-Opacity)	-	0	-
10.4(PHYSICAL AND CHEMICAL CHARACTERISTICS- Reversion Test)	-	0	-
10.5(PHYSICAL AND CHEMICAL CHARACTERISTICS- Vicat Softening Temperature)	-	0	-
10.6(PHYSICAL AND CHEMICAL CHARACTERISTICS- Density)	-	0	-
11.1-Table 6(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Type Test))	-	0	-
11.1-Table 6(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test))	-	0	-
11.1-Table 7(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Type Test)-for Integral Sealing Ring Sockets)	-	0	-
11.1-Table 7(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test)-for Integral Sealing Ring Sockets)	-	0	-
11.1.1(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test)-for Plumbing pipes)	-	0	-
11.2(Resistance to External Blows at 0°C)	-	0	-
10.3(Effect on Water Test)	-	0	-
6.1.2(PVC Resin)	-	0	-
9.1(PIPE ENDS)	-	0	-
10.1(Colour)	-	0	-
10.1(Surface Finish)	-	0	-
7.2.1.1 Table3(Angle of taper (Note-1))	-	0	-
10.7(Sulphated Ash Content)	-	0	-
5(CLASSIFICATION OF PIPES)	-	0	-
7(DIMENSIONS-PIPE-Nominal Diameter)	-	0	-
7.1.1.1(DIMENSIONS-PIPE-Mean O.D. (Minimum))	-	0	-
7.1.1.1(DIMENSIONS-PIPE-Mean O.D. Variation)	-	0	-
7.1.1.2(DIMENSIONS-PIPE-O.D. at any Point (Minimum))	-	0	-
7.1.1.2(DIMENSIONS-PIPE-Ovality (Maximum))	-	0	-
7.1.2.1(DIMENSIONS-PIPE-Thickness(Minimum))	-	0	-
7.1.2.1(DIMENSIONS-PIPE-Thickness(Maximum))	-	0	-
7.1.2.1(DIMENSIONS-PIPE-Average Thickness)	-	0	-
7.2.1(DIMENSIONS-Socket)	-	0	-
7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Minimum Length)	-	0	-
7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Diameter at mid point of the socket length (Minimum))	-	0	-
7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Diameter at mid point of the socket length (Maximum))	-	0	-
7.2.1.2(a)-Table 5(DIMENSIONS-Sockets for elastomeric sealing ring joints-Minimum depth of engagement)	-	0	-
7.2.1.2-Table 4(DIMENSIONS-Sockets for elastomeric sealing ring joints-Socket inner Diameter)	-	0	-
8(SEALING RINGS)	-	0	-
10.1(PHYSICAL AND CHEMICAL CHARACTERISTICS-Visual Appearance)	-	0	-
10.2(PHYSICAL AND CHEMICAL CHARACTERISTICS-Opacity)	-	0	-
10.4(PHYSICAL AND CHEMICAL CHARACTERISTICS- Reversion Test)	-	0	-
10.5(PHYSICAL AND CHEMICAL CHARACTERISTICS- Vicat Softening Temperature)	-	0	-
10.6(PHYSICAL AND CHEMICAL CHARACTERISTICS- Density)	-	0	-
11.1-Table 6(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Type Test))	-	0	-
11.1-Table 6(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test))	-	0	-
11.1-Table 7(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Type Test)-for Integral Sealing Ring Sockets)	-	0	-
11.1-Table 7(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test)-for Integral Sealing Ring Sockets)	-	0	-
11.1.1(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test)-for Plumbing pipes)	-	0	-
11.2(Resistance to External Blows at 0°C)	-	0	-
10.3(Effect on Water Test)	-	0	-
6.1.2(PVC Resin)	-	0	-
9.1(PIPE ENDS)	-	0	-
10.1(Colour)	-	0	-
10.1(Surface Finish)	-	0	-
7.2.1.1 Table3(Angle of taper (Note-1))	-	0	-
10.7(Sulphated Ash Content)	-	0	-
5(CLASSIFICATION OF PIPES)	-	0	-
7(DIMENSIONS-PIPE-Nominal Diameter)	-	0	-
7.1.1.1(DIMENSIONS-PIPE-Mean O.D. (Minimum))	-	0	-
7.1.1.1(DIMENSIONS-PIPE-Mean O.D. Variation)	-	0	-
7.1.1.2(DIMENSIONS-PIPE-O.D. at any Point (Minimum))	-	0	-
7.1.1.2(DIMENSIONS-PIPE-Ovality (Maximum))	-	0	-
7.1.2.1(DIMENSIONS-PIPE-Thickness(Minimum))	-	0	-
7.1.2.1(DIMENSIONS-PIPE-Thickness(Maximum))	-	0	-
7.1.2.1(DIMENSIONS-PIPE-Average Thickness)	-	0	-
7.2.1(DIMENSIONS-Socket)	-	0	-
7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Minimum Length)	-	0	-
7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Diameter at mid point of the socket length (Minimum))	-	0	-
7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Diameter at mid point of the socket length (Maximum))	-	0	-
7.2.1.2(a)-Table 5(DIMENSIONS-Sockets for elastomeric sealing ring joints-Minimum depth of engagement)	-	0	-
7.2.1.2-Table 4(DIMENSIONS-Sockets for elastomeric sealing ring joints-Socket inner Diameter)	-	0	-
8(SEALING RINGS)	-	0	-
10.1(PHYSICAL AND CHEMICAL CHARACTERISTICS-Visual Appearance)	-	0	-
10.2(PHYSICAL AND CHEMICAL CHARACTERISTICS-Opacity)	-	0	-
10.4(PHYSICAL AND CHEMICAL CHARACTERISTICS- Reversion Test)	-	0	-
10.5(PHYSICAL AND CHEMICAL CHARACTERISTICS- Vicat Softening Temperature)	-	0	-
10.6(PHYSICAL AND CHEMICAL CHARACTERISTICS- Density)	-	0	-
11.1-Table 6(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Type Test))	-	0	-
11.1-Table 6(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test))	-	0	-
11.1-Table 7(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Type Test)-for Integral Sealing Ring Sockets)	-	0	-
11.1-Table 7(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test)-for Integral Sealing Ring Sockets)	-	0	-
11.1.1(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test)-for Plumbing pipes)	-	0	-
11.2(Resistance to External Blows at 0°C)	-	0	-
10.3(Effect on Water Test)	-	0	-
6.1.2(PVC Resin)	-	0	-
9.1(PIPE ENDS)	-	0	-

31 Dec, 2026

-
Included w.e.f. 28-06-2023.

IS 4148 (1989)

Surgical rubber gloves - Specification (First Revision)

15400 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1.1(Manufacture)	-	250	Nil
4.1.2(Manufacture)	-	0	Charges already taken
4.1.3(Manufacture)	-	0	Charges already taken
4.1.4(Manufacture)	-	0	Charges already taken
4.2(Dimensions Fig 1 and Table 1)	-	250	Nil
4.2(Dimensions Fig 1 and Table 1)	-	0	Charges already taken
4.2(Dimensions Fig 1 and Table 1)	-	0	Charges already taken
4.2(Dimensions Fig 1 and Table 1)	-	0	Charges already taken
4.2(Dimensions Fig 1 and Table 1)	-	0	Charges already taken
4.2(Dimensions Fig 1 and Table 1)	-	0	Charges already taken
4.2(Dimensions Fig 1 and Table 1)	-	0	Charges already taken
4.3(Thickness)	-	250	Nil
4.4.1(Physical Properties)	-	1350	Test charges Rs. 1100/- plus Rs. 250/ Specimen charges (25% discount is not applicable in specimen charges)
4.4.1(Physical Properties)	-	1350	Test charges Rs. 1100/- plus Rs. 250/ Specimen charges (25% discount is not applicable in specimen charges)
4.4.2(After accelerated aging at 70 + 1OC for 240 h )	-	6000	(25% discount is not applicable in Ageing charges)
4.4.2(After accelerated aging at 70 + 1OC for 240 h )	-	0	Test charges already taken
4.4.3(After heat ageing in autoclave)	-	2500	(25% discount is not applicable in Ageing charges)
4.4.3(After heat ageing in autoclave)	-	0	Charges already taken
4.4.4(Tension Set)	-	1350	Test charges Rs. 1100/- plus Rs. 250/ Specimen charges (25% discount is not applicable in specimen charges)
4.5(pH of Aqueous Extract )	-	750	Nil

31 Dec, 2026

-
Included w.e.f. 27-05-2022.

IS 3462 (1986)

Unbacked Flexible Pvc Flooring

19800 View breakup
Rs.17238/- (After 25% discount for BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1.1(DIMENSIONS AND TOLERANCES-Liaear Dimension-Sheets or Rolls)	-	200	Nil
5.1.2(DIMENSIONS AND TOLERANCES-Liaear Dimension-Tiles)	-	250	Nil
5.2(DIMENSIONS AND TOLERANCES-Thickness)	-	0	Charge already taken in clause no. 5.1.1 (Combined charges)
6. 1(COLOUR AND SURFACE CHARACTERISTICS)	-	250	Nil
7.1-Table 1(iii)(REQUlREMENTS-rile size )	-	0	Charge already taken
7.1-Table 1(iv)(REQUlREMENTS-Dimensional stability )	-	700	Nil
7.1-Table 1(iv)(REQUlREMENTS-Squareness )	-	0	Charge already taken
7.1-Table 1(v)(REQUlREMENTS-Colour fastness to daylight )	-	850	Nil
7.1-Table 1(vi)(REQUlREMENTS-Curling )	-	0	Charge already taken
7.1-Table 1(vii)(REQUlREMENTS-Residual indenration )	-	1400	Nil
7.1-Table 1(viii)(REQUlREMENTS-Flexibility )	-	1500	Nil
7.1-Table 1(ix)(REQUlREMENTS-Resistance to various substances-Scratch width )	-	1100	nil
7.1-Table 1(x)(REQUlREMENTS-Resistance to various substances )	-	0	Charge already taken in clause no. 7.1 (Combined charges)
7.1-Table 1(xi)(REQUlREMENTS-Ply adhesion )	-	1400	Test charges Rs. 1100/- plus Rs. 300/ Specimen charges (25% discount is not applicable in specimen charges)
7.1-Table 1(xii)(REQUlREMENTS-Moisture movernent )	-	700	Nil
7.1-Table 1(xiii)(REQUlREMENTS-Heat ageing and exudation )	-	10100	Test charges Rs. 1100/- plus Rs. 9000/- Conditioning charges (25% discount is not applicable in Conditioning charges)
7.1-Table 1(xiii)(REQUlREMENTS-Elastic product)	-	1350	Test charges Rs. 1100/- plus Rs. 250/ Specimen charges (25% discount is not applicable in specimen charges)

31 Dec, 2026

-
Included w.e.f. 29.06.2017.

100

IS 5175 (2014)

Fibre ropes – Polypropylene split film, monofilament and multifilament (PP2) and polypropylene high- tenacity multifilament (PP3) – 3-, 4-, 8- and 12-strand ropes (third revision)

6300 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 4( Designation)	-	0	Nil
Cl 5(General Requirements)	-	3950	Nil
Cl 6 & Table 1,2 or 3(Reference Number.)	-	750	Nil
Cl 6 & Table 1,2 or 3(Linear Density)	-	500	Nil
Cl 6 & Table 1,2 or 3(Breaking Force)	-	1100	Nil

31 Dec, 2026

-
-

101

IS 4984 (2016)

Polyethylene pipes for water supply - Specification (Fifth Revision)

42325 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.10(Slow Crack Growth Rate)	-	5500	NIl
8.9 table-6(Elongation at Break)	-	1100	Nil
8.8(Tensile Strength for Butt-fusion)	-	1100	Nil
8.7(Density)	-	500	Nil
8.5 (Oxidation Induction Time)	-	2200	Nil
8.4( Melt Flow Rate)	-	1100	Nil
8.2(Longitudinal Reversion Test)	-	1100	Nil
8.1.2 table -5(Internal Pressure Creep Rupture Test of Pipe Joints)	-	1600	Nil
8,/8.1/8.1.1 table-5(PERFORMANCE REQUIREMENTS / Hydraulic Characteristics/ Internal Pressure Creep Rupture Test of Pipe)	-	22000	Nil
7.4.1.2(Ovality)	-	250	Nil
7.4 table -3 & 4(6.1 Dimensions)	-	250	Nil
7.2(Length)	-	250	Nil
6.2.1(6.1.1 Identification Stripes)	-	250	Nil
6.2(Colour)	-	250	Nil
6.1.4(PIPE DESCRIPTION)	-	250	Nil
6.1.3 (PIPE DESCRIPTION)	-	0	Nil
6, 6.1.2(PIPE DESCRIPTION)	-	0	Nil
6, 6.1.1(PIPE DESCRIPTION)	-	0	Nil
6, 6.1(PIPE DESCRIPTION)	-	0	Nil
8.6(Overall migration)	-	2200	Nil
8.3(Carbon black)	-	925	Nil
5.3 (a)(Carbon Black Master Batch)	-	925	Nil
5.2(Polyethylene Resin)	-	2000	Nil

31 Dec, 2026

-
-

102

IS 10124 : Part 2 (2009)

Fabricated pvc - U fittings for potable water supplies - Specification: Part 2 specific requirements for sockets (Second Revision)

4450 View breakup
Rs.1444/-, Rs.3075/- PVC Resin (After 25% discount for BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.2.1, Table-1, Fig-1(Nominal size)	-	250	NIL
3.2.1, Table-1, Fig-1(B)	-	0	CHARGES ALREADY TAKEN IN CLAUSE NO. 3.2.1
3.2.1, Table-1, Fig-1(Minimum wall thickness for working pressure)	-	0	CHARGES ALREADY TAKEN IN CLAUSE NO. 3.2.1
3.2.1, Table-1, Fig-1(Plumbing)	-	0	CHARGES ALREADY TAKEN IN CLAUSE NO. 3.2.1
Clause 3.2.2, and Fig. 2(Nominal size)	-	250	NIL
Clause 3.2.2, and Fig. 2.(B)	-	0	CHARGES ALREADY TAKEN IN CLAUSE NO. 3.2.2
Clause 3.2.2, and Fig. 2.(Minimum wall thickness for working pressure)	-	0	CHARGES ALREADY TAKEN IN CLAUSE NO. 3.2.2
3.2.2, and Fig. 2(Dimensions of Socket for Elastomeric Sealing Ring Joint)	-	0	CHARGES ALREADY TAKEN IN CLAUSE NO. 3.2.2
10.3 of IS 4985 & Cl. 3.1 of IS 12235(P-4)(Effect on water: Lead (First Extraction))	-	3000	NIL
10.3 of IS 4985 & Cl. 3.1 of IS 12235(P-4)(Effect on water: Lead (Third Extraction))	-	0	NIL
10.3 of IS 4985 & Cl. 3.1 of IS 12235(P-10)(Effect on water:Dialkyl tin C4 and higher homologues measured as tin (third extraction))	-	0	NIL
10.3 of IS 4985 & Cl. 3.2 of IS 12235(P-4)(Effect on water: Cadmium (all three extracts))	-	0	NIL
10.3 of IS 4985 & Cl. 3.2 of IS 12235(P-4)(Effect on water: Mercury (all three extracts))	-	0	NIL
10.7 of IS 4985(Sulphated Ash content, Annex-B of IS 4985)	-	950	NIL

31 Dec, 2026

-
upto 600mm dia

103

IS 7834 : Part 3 (1987)

injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 3 Specific requirements for 90 degree elbows

3500 View breakup
Rs.4219/-, Rs.3075/- PVC Resin (After 25% discount for BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
cl 2.2.2(Dimensions)	-	500	NIL
Cl. 2.1 (Ref. Cl. 6.3 of IS 7834 (part 1) : 1987(Effect on water - Lead (first extraction) - Appendix C )	-	3000	NIL
Cl. 2.1 (Ref. Cl. 6.3 of IS 7834 (part 1) : 1987(Effect on water - Lead (third extraction) - Appendix C)	-	0	NIL
Cl. 2.1 (Ref. Cl. 6.3 of IS 7834 (part 1) : 1987(Effect on water - Dialkyl tin C4 and higher homologues measured as tin (third extraction) - Appendix C)	-	0	NIL
Cl. 2.1 (Ref. Cl. 6.3 of IS 7834 (part 1) : 1987(Effect on water - Other toxic substances (third extraction) - Appendix C)	-	0	NIL

31 Dec, 2026

-
0.0

104

IS 7834 : Part 1 (1987)

injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 1 General requirements

5625 View breakup
Rs.4219/-, Rs.3075/- PVC Resin (After 25% discount for BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.4(Minimum Thickness)	-	250	NIL
Cl. 5.1.1, 5.1.2, Table 1, Fig 1(Minimum Socket Length)	-	250	NIL
Cl. 5.1.1, 5.1.2, Table 1, Fig 1(Mean Socket Internal Diameter at Mid-Point of Socket Length)	-	0	NIL
Cl. 5.1.1, 5.1.2, Table 1, Fig 1(Out-of-roundness tolerances of socket inside diameter)	-	0	NIL
Cl. 6.1(Stress Relief Test- Appendix A)	-	700	NIL
Cl. 6.2(Opacity- Appendix B)	-	575	NIL
Cl. 6.3(Effect on Water[(Lead ( first extraction )]- Appendix C)	-	3000	NIL
Cl. 6.3(Effect on Water[(Lead ( third extraction )]- Appendix C)	-	0	NIL
Cl. 6.3(Effect on Water [Dialkyl tin C4, and higher homologues, measured as tin ( third extraction )]- Appendix C)	-	0	NIL
Cl. 6.3(Effect on Water [Other toxic substances ( third extraction )]- Appendix C)	-	0	NIL
Cl. 6.4(Short-Term Hydraulic Test- Appendix D)	-	850	NIL

31 Dec, 2026

-
0.0

105

IS 10124 : Part 1 (2009)

Fabricated PVC-U Fittings for Potable Water Supplies - Specification Part 1 General Requirements (Second Revision)

6025 View breakup
Rs.1444/-, Rs.3075/- PVC Resin (After 25% discount for BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(Material)	-	4100	VCM CONTENT RS. 3000/- + K-VALUE RS. 1100/-
4(Size of fitting)	-	250	NIL
5.1 Table-1 Fig.1(Dimension of Socket length)	-	250	NIL
5.1.2 Table-1(Dimensions of mean inside diameter at mid-point of socket depth)	-	0	NIL
5.1.3 (Out of Roundness Tolerance of Socket Inside Diameter)	-	0	NIL
5.2 Table-2 Fig.2(Dimensions of socket for elastomeric sealing ring)	-	0	NIL
6.1(Opacity test in accordance with IS 12235 (Part 3))	-	575	NIL
6.2(Short Term Hydraulic Test in accordance with Annex A)	-	850	NIL
8(Marking)	-	250	NIL

31 Dec, 2026

-
upto 600mm dia

106

IS 2925 (1984)

Specification for industrial safety helmets (Second Revision)

10825 View breakup
Rs.8156/- (After 25% discount for BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(Shell)	-	1000	NIL
3.2(Harness)	-	375	NIL
3.3(Metal Parts)	-	1000	NIL
4.1(Sizes)	-	250	NIL
5.1(Shell)	-	0	Charge already taken in clause no. 3.1 (Combined charges)
5.2(Harness)	-	250	Charge already taken in clause no. 3.2 (Combined charges)
5.3(Chin Strap or Nape Strap)	-	500	Charge taken on construction
5.4(Lamp Bracket)	-	0	Charge already taken in clause no. 5.3 (Consider on construction)
5.5(Cable Clip)	-	0	Charge already taken in clause no. 5.3 (Consider on construction)
6.1(Workmanship & Finish)	-	300	NIL
7.1(Mass)	-	250	NIL
8.1(Shock Absorption Resistance)	-	2000	NIL
8.2(Penetration Resistance)	-	1000	NIL
8.3(Flamability Resistance)	-	750	NIL
8.4(Electrical Resistance)	-	1100	NIL
8.5(Water Absorption)	-	600	NIL
8.6(Heat Resistance)	-	700	NIL

31 Dec, 2026

-
Except Lamp Bracket and cable cliip testing

107

IS 2508 (2016)

Polyethylene films and sheets - Specification (Third Revision)

18625 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1.1(Appearance)	-	300	Nil
5.1.2(Film Form)	-	0	Charge already taken in clause no. 5.1.1 (Combined charges with visual appearance)
5.1.3(Odour)	-	0	Charge already taken in clause no. 5.1.1 (Combined charges with visual appearance)
5.1.4(Density, Cl.5 of IS 13360(Part-3/Section-1))	-	500	Nil
5.1.5(Melt Flow Index. Cl 6, 7 of IS 13360(Part-4/Section-1))	-	1100	Nil
5.1.6a(Carbon Black Content, Annex-A)	-	925	Nil
5.1.6b(Ash Content, Annex-A)	-	950	Nil
5.1.6c(Carbon Black Dispersion, Cl.16 of IS 2530)	-	700	Nil
5.2.2(Tolerance on Thickness, Annex-A)	-	500	Thickness & Width combined charges
6.1, Table 1(Tensile strength at break. A) Machine Direction. IS 13360 (Part 5/Sec 1))	-	1350	Test charges Rs. 1100/- plus specimen charges Rs. 250/- = Rs. 1350/- (25% discount in not applicable in specimen charges)
6.1, Table 1(Tensile strength at break. B) Transverse Direction. IS 13360 (Part 5/Sec 3))	-	1100	Nil
6.1, Table 1(Ageing test at (70-1)c for 7 days , cl 4 IS 7016 )	-	4300	(25% discount in not applicable in Ageing charges)
6.1, Table 1(Elongation at break ,A) Machine direction .IS 13360(Part-5/sec-1) )	-	1350	Test charges Rs. 1100/- plus specimen charges Rs. 250/- = Rs. 1350/- (25% discount in not applicable in specimen charges)
6.1, Table 1(Elongation at break ,B) Cross-machine direction..IS 13360(Part-5/sec-3) )	-	1100	Nil
6.1, Table 1(Dartimpact strength Method B of IS 13360 (Part-5/sec-6) )	-	1000	Nil
6.1, Table 1(Tear resistence. A) Machine direction Annex B)	-	1000	Test charges Rs. 750/- plus specimen charges Rs. 250/- = Rs. 1000/- (25% discount in not applicable in specimen charges)
6.1, Table 1(Tear resistence. B) Transverse direction )	-	750	Nil
7.1. Table 2(Tensile strength at break A) Machine direction IS 13360 (Part-5/sec-1) )	-	0	The charges applicable as per clause 7.1 Table-1
7.1. Table 2(Tensile strength at break,B) Crosse machine direction IS 13360 (Part-5/sec-3) )	-	0	The charges applicable as per clause 7.1 Table-1
7.1. Table 2(Ageing test at (70-1)c for 7 days , cl 4 IS 7016 )	-	0	The charges applicable as per clause 7.1 Table-1
7.1. Table 2(Elongation at break , A) Machine direction IS 13360 (Part-5/sec-3) IS 13360 (Part-5/sec-1) )	-	0	The charges applicable as per clause 7.1 Table-1
7.1. Table 2(Elongation at break , A) Transverse direction IS 13360 (Part-5/sec-3) )	-	0	The charges applicable as per clause 7.1 Table-1
7.1. Table 2(Dart impact strenght , Method A of IS 3360 (Part-5/sec-6) )	-	0	The charges applicable as per clause 7.1 Table-1
8.1, Table 3(Tensile properties ,A) Yield strenght . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do)	-	0	The charges applicable as per clause 7.1 Table-1
8.1, Table 3(Tensile properties , B) Break strenght . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do)	-	0	The charges applicable as per clause 7.1 Table-1
8.1, Table 3(Tensile properties ,C) Yield elongation . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do)	-	0	The charges applicable as per clause 7.1 Table-1
8.1, Table 3(Tensile properties ,D) Break elongation . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do)	-	0	The charges applicable as per clause 7.1 Table-1
8.1, Table 3(Tear resistance , Annex B)	-	0	The charges applicable as per clause 7.1 Table-1
8.1, Table 3(Puncture resistance , Annex C)	-	1100	Nil
9.1, Table 4(Tensile properties ,A) Yield strenght . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do)	-	0	The charges applicable as per clause 7.1 Table-1
9.1, Table 4(Tensile properties , B) Break strenght . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do)	-	1100	Nil
9.1, Table 4(Tensile properties ,C) Yield elongation . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do)	-	0	The charges applicable as per clause 7.1 Table-1
9.1, Table 4(Tensile properties ,D) Break elongation . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do)	-	0	The charges applicable as per clause 7.1 Table-1
9.1, Table 4(Tear resistance , Annex B)	-	0	The charges applicable as per clause 7.1 Table-1
9.1, Table 4(Puncture resistance , Annex C)	-	0	The charges applicable as per clause 7.1 Table-1

31 Dec, 2026

-
-

108

IS 15477 (2019)

Adhesives for use with ceramic tiles and mosaics

21650 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Classification)	-	0	NIL
5.1(Tensile Adhesion Strength )	-	1350	TEST CHARGES RS. 1100/- + RS. 250 SPECIMEN PREPARATION CHARGES (25 % DISCOUNT IS NOT APPLICABLE ON SPECIMEN CHARGES)
5.1(Tensile Adhesion Strength)	-	1350	TEST CHARGES RS. 1100/- + RS. 250 SPECIMEN PREPARATION CHARGES (25 % DISCOUNT IS NOT APPLICABLE ON SPECIMEN CHARGES)
5.2(Shear Adhesion Strength )	-	1350	TEST CHARGES RS. 1100/- + RS. 250 SPECIMEN PREPARATION CHARGES (25 % DISCOUNT IS NOT APPLICABLE ON SPECIMEN CHARGES)
5.2(Shear Adhesion Strength)	-	1350	TEST CHARGES RS. 1100/- + RS. 250 SPECIMEN PREPARATION CHARGES (25 % DISCOUNT IS NOT APPLICABLE ON SPECIMEN CHARGES)
5.2(Shear Adhesion Strength)	-	1350	TEST CHARGES RS. 1100/- + RS. 250 SPECIMEN PREPARATION CHARGES (25 % DISCOUNT IS NOT APPLICABLE ON SPECIMEN CHARGES)
5.3(OpenTime)	-	1100	NIL
5.4(Adjustment Time)	-	1100	NIL
5.5(Slip (Required for Vertical Application Only))	-	1600	TEST CHARGES RS. 1100/- + RS. 500 SPECIMEN PREPARATION CHARGES (25 % DISCOUNT IS NOT APPLICABLE ON SPECIMEN CHARGES)
5.6(Deformability (Required for VerticalApplication Only))	-	2700	TEST CHARGES RS. 2200/- + RS. 500 SPECIMEN PREPARATION CHARGES + RS. 8400/- CONDITIONING CHARGES (25 % DISCOUNT IS NOT APPLICABLE ON SPECIMEN CHARGES & CONDITIONING CHARGES)

31 Dec, 2026

-
-

Bureau of Indian Standards

The National Standards Body of India

CENTRAL INSTITUTE OF PETROCHEMICALS ENGINEERING AND TECHNOLOGY (CIPET):CSTS-BHOPAL

G SECTOR, GOVINDPURA INDUSTRIAL AREA, J. K. ROAD, BHOPAL, BHOPAL, Bhopal, Madhya Pradesh, 462023

7869955244 cipet.bhopal@gmail.com

Scope List