BIS - LIMS (Laboratory Information Management System)

CENTRAL INSTITUTE OF PETROCHEMICALS ENGINEERING AND TECHNOLOGY (CIPET):CSTS-BHOPAL

G SECTOR, GOVINDPURA INDUSTRIAL AREA, J. K. ROAD, BHOPAL, BHOPAL, Bhopal, Madhya Pradesh, 462023

7869955244 cipet.bhopal@gmail.com

Scope List

Reset

109 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Exclusion

Testing Charges (Excl. Of Taxes)

Facility Type

Effective Date

Validity Date

Remark

IS 15827 (2019)

Cladding films for greenhouse / polyhouse - Specifications (First Revision)

- View breakup
For Class ATest Charges: Rs.24,550/- (25% Discount to BIS)+ Sample Preparation Charges: Rs.2250/- + UV exposure test charges (190×100+175×1300) (1400 hrs): Rs.2,46,500/- For Class BTest Charges: Rs.24,550/- (25% Discount to BIS)+ Sample Preparation Charges: Rs.2250/- + UV exposure test charges (190×100+175×2350) (2450 hrs) : Rs.4,30,250/- For Class CTest Charges: Rs.24,550/- (25% Discount to BIS)+ Sample Preparation Charges: Rs.2250/- + UV exposure test charges (190×100+175×3970) (4070 hrs): Rs.7,13,750/- For Class DTest Charges: Rs.24,550/- (25% Discount to BIS)+ Sample Preparation Charges: Rs.2250/- + UV exposure test charges (190×100+175×4570) (4670 hrs): Rs.8,18,750/- For Class ETest Charges: Rs.24,550/- (25% Discount to BIS)+ Sample Preparation Charges: Rs.2250/- + UV exposure test charges (190×100+175×5730) (5830 hrs): Rs.10,21,750/- For Class FTest Charges: Rs.24,550/- (25% Discount to BIS)+ Sample Preparation Charges: Rs.2250/- + UV exposure test charges (190×100+175×7250) (7350 hrs): Rs.12,87,750/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

31 Dec, 2026

-
Revised 2019 Version Included w.e.f. 24.07.2019

IS 4669 (1968)

Methods of test for polyvinyl chloride resins

- View breakup
Rs.4238/- (After 25% discount for BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

31 Dec, 2026

-
Included w.e.f. 29.06.2017.

IS 4761 (1968)

Specification for unsupported pvc rainwear

- View breakup
Rs.5038/- (After 25% discount for BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

31 Dec, 2026

-
Included w.e.f. 29.06.2017.

IS 2076 (1981)

Specification for unsupported flexible polyvinyl chloride sheeting (First Revision)

- View breakup
Rs17150/- (After 25% discount for BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

31 Dec, 2026

-
Included w.e.f. 29.06.2017.

IS 11197 (1985)

Specification for monoaxially oriented polypropylene tapes

- View breakup
Rs.4238/-, (After 25% discount for BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

31 Dec, 2026

-
Included w.e.f. 29.06.2017.

IS 11584 (1986)

Specification for high density polyethylene (Hdpe) crates for milk satchets

- View breakup
Rs.7838/- (After 25% discount for BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

31 Dec, 2026

-
-

IS 7834 : Part 2 (1987)

injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 2 Specific requirements for 45 degrees elbows

7294 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
2.1(General)	-	1300	-
2.2(Manufacture)	-	750	-
2.2.2, Table 1(Size)	-	0	-
2.2.2, Table 1(45 ̊ Elbow Laying Length)	-	250	-
2.2.3( inside diameter of the socket)	-	500	-
2.2.3(socket length)	-	0	The testing charges of cl. no.. 2.2.3 has already been taken in cl. no. 2.2.3 (inside diameter of the socket).

Complete

31 Dec, 2026

-
-

IS 7834 : Part 4 (1987)

injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 4 Specific requirements for 90 degree tees

7294 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
table 1 sl.no: 09(90 )	-	0	-
2.1(General)	-	1050	-
2.2(Manufacture)	-	1050	-
2.2.2, Table 1(Size)	-	0	-
2.2.2, Table 1(90 ̊ Elbow Laying Length)	-	250	-
2.2.3( inside diameter of the socket)	-	500	-
2.2.3(Socket length)	-	0	The testing chrges of cl. no. 2.2.3 has already been taken in cl. no. 2.2.3 (Inside diameter of the socket).

Complete

31 Dec, 2026

-
-

IS 7834 : Part 5 (1987)

Injection Moulded PVC Socket Fittings With Solvent Cement Joints for Water Supplies - Part 5 : Specific Requirements for 45 degree Tees

7294 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
table 1 sl.no: 05(40 (Z) )	-	0	-
2.1(General)	-	1050	-
2.2(Manufacture)	-	1050	-
2.2.2, Table 1(Size)	-	0	-
2.2.2, Table 1(45 ̊ Tees Laying Length, Z)	-	250	-
2.2.2, Table 1(45 ̊ Tees Laying Length, Z1)	-	0	The testing charges for cl no. 2.2.2 has already been taken in cl. no. (Table 1 - 45' Tees Laying Length, Z)
2.2.3( inside diameter of the socket)	-	500	-
2.2.3(Socket length)	-	0	The testing charges for cl no. 2.2.3 has already been taken in cl. no. 2.2.3 (Inside diameter of the socket).

Complete

31 Dec, 2026

-
-

IS 7834 : Part 6 (1987)

injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 6 Specific requirements for sockets

7294 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
2.1(General)	-	1050	-
2.2(Manufacture)	-	1050	-
2.2.2, Table 1(Size)	-	0	-
2.2.2, Table 1(Socket Laying Length)	-	250	-
2.2.3( inside diameter of the socket)	-	500	-
2.2.3(Socket length)	-	0	-

Complete

31 Dec, 2026

-
-

IS 7834 : Part 7 (1987)

injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 7 Specific requirements for unions

7294 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
2.1(General)	-	1050	-
2.2(Manufacture)	-	1050	-
2.2.2, Table 1(Size)	-	0	-
2.2.2, Table 1(Union Laying Length)	-	250	-
2.2.3( inside diameter of the socket)	-	500	-
2.2.3(Socket length)	-	0	-

Complete

31 Dec, 2026

-
-

IS 7834 : Part 8 (1987)

injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 8 Specific requirements for caps

- View breakup
Rs.4219/-, Rs.3075/- PVC Resin (After 25% discount for BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

31 Dec, 2026

-
-

IS 8069 (1989)

High density polyethylene (HDPE) woven sacks for packing pesticides – Specification (second revision)

- View breakup
Rs.3088/- (After 25% discount for BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

31 Dec, 2026

-
Included w.e.f. 29.06.2017.

IS 13217 (1991)

Thermoplastics fumigation covers

- View breakup
Rs.30550/- (After 25% discount for BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

31 Dec, 2026

-
Included w.e.f. 29.06.2017.

IS 5378 (1994)

Polyethylene cane - Specification (First Revision)

- View breakup
Rs.3225/-, Rs.1988/- For Material (After 25% discount for BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

31 Dec, 2026

-
Included on 29-05-2015

IS 6192 (1994)

Textiles – Monoaxially oriented high density polyethylene tapes – Specification (second revision)

4600 View breakup
Rs.3450/- (After 25% discount for BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(MATERIAL(Refer IS 7328 :1974))	-	500	Nil
5.1(Linear density (For test method Refer IS 6193:1971 and IS 7703 Part 1))	-	500	Nil
5.2(Tenacity (For test method Refer IS 6193:1971))	-	550	Nil
5.3(Elongation (For test method Refer IS 6193:1971))	-	550	Nil
5.4(Finished width (For test method Refer IS 6193:1971))	-	250	Nil
5.5(Thickness (For test method Refer IS 6193:1971))	-	200	Nil
5.6(Heat Shrinkage at 60 degree C(For test method Refer IS 6193:1971) )	-	850	NIl
5.6(Heat Shrinkage at 95 degree C(For test method Refer IS 6193:1971) )	-	850	Nil
5.7( pigmented tapes)	-	0	Nil
5.7( pigmented tapes(Refer IS 2454))	-	850	Nil

Complete

31 Dec, 2026

-
-

IS 14182 (1994)

Solvent cement for use with unplasticized polyvinyl chloride plastic pipe and fittings - Specifications

8600 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1 - Table 1 - v-a(Chemical Resistance - Change in mass, increase)	-	0	-
4.1 - Table 1 - v-a(Chemical Resistance - Change in mass, Decrease)	-	0	-
4.1 - Table 1 - v-b(Chemical Resistance - Change in flexural yield strength, Increase)	-	0	-
4.1 - Table 1 - v-b(Chemical Resistance - Change in flexural yield strength, Decrease)	-	0	-
4.2(Shall be thixotropic and consist substantially of solvents that will swell plastisized PVC polymers and stabilizers)	-	0	-
4.3(Shall be capable of application by brush and shall contain no lumps or foreign matter or macroscopic undissolved particles that will adversely affect the ultimate joint strength or chemical resistance of the material )	-	0	-
4.4(Shall not show gelation and no evidence of stratification or separation that cannot be removed by stirring)	-	0	-
4.5(When used under the conditions for which they are designed, non metallic materials in contact with or likely to come in contact with potable water shall not constitute a toxic hazard , shall not support microbial growth and shall not give rise to unpleasant taste or odour, cloudiness or discolouration of the water)	-	0	-
4.6(Solvents systems consisting of blends of tetrahydrofuran and cyclohexanone have been found to be acceptable)	-	0	-
4.7(Vinyl Chloride Polymer content - Annex A)	-	1100	-
4.8(Dissolution - Capable of dissolving an additional unplastisized PVC granular, powder compound or resin)	-	400	-
4.5(REQUIREMENTS)	-	300	VISUAL APPEARANCE
4.9 and 6.1(Viscosity)	-	0	Test charges has already been taken in cl. no. 4.9 and 6.1.
4.7 and 6.1(REQUIREMENTS - Vinyl Chloride Polymer Content)	-	0	Test charges has already been taken in cl. no. 4.7
4.9 and 6.1(Viscosity - Regular)	-	0	Test charges has already been taken in cl. no. 4.9 and 6.1.
4.9 and 6.1(Viscosity - Medium)	-	0	Test charges has already been taken in cl. no. 4.9 and 6.1.
4.9 and 6.1(Viscosity - Heavy )	-	1100	-
4.10 and 6.1(Lap Shear Strength - After 2 h curing time)	-	1100	-
4.10 and 6.1(Lap Shear Strength - After 10 h curing time)	-	1100	-
4.10 and 6.1(Lap Shear Strength - After 72 h curing time)	-	1600	-
4.11 and 6.1(Hydrostatic Burst Strength - After 2 h curing time)	-	850	-

Complete

31 Dec, 2026

-
-

IS 14735 (1999)

Unplasticized Polyvinyl Chloride (UPVC) Injection Moulded Fittings for Soil and Waste Discharge System for Inside and Outside Buildings Including Ventilation and Rain Water System -

10675 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
19(Marking)	-	0	Nil
3(Type of Fitting)	-	0	Nil
4(Size Designation)	-	0	Nil
5(Colour of fittings)	-	300	Nil
7.1,Table 1(Wall thickness)	-	500	Nil
7.2 ,Table 2&3(Socket Dimensions)	-	0	Test Charges already taken in clause no. 7.1
7.3(Dimensions of waste trap(Nahani Trap)	-	0	Test Charges already taken in clause no. 7.1
8(Sealing Rings)	-	375	Nil
10(Workmanship)	-	300	Nil
11(Design requirements)	-	500	Nil
11.1(Solvent cement type or Rubber ring type)	-	0	Test Charges already taken in clause no. 11
11.2(Socket and spigot configeration)	-	0	Test Charges already taken in clause no. 11
11.4,Table 5(Vent cowl)	-	0	Test Charges already taken in clause no. 11
11.5,Table 6(Pipe Clips)	-	0	Test Charges already taken in clause no. 11
12(Physical test requirements)	-	0	Nil
12.1(Visual appearance)	-	300	Nil
12.2(Stress relief test)	-	700	Nil
12.3(Vicat softening tempewrature)	-	1100	Nil
Cl.13, IS 12235 (P-7)-2004, (Resistance to Sulphuric Acid)	-	2500	Test charge Rs. 2000/- plus specimen charge Rs.500/- = 2500/- (25 % discount is not applicable in specimen charge)
Cl.14, Annex A(Titanium Di-Oxide Content)	-	1200	Nil
Cl.15, Annex B(Sulphated Ash Content)	-	950	Nil
16(Mechanical Properties)	-	0	Nil
16.1(Impact test)	-	1100	Nil
17(Watet tightness of joint)	-	850	Nil

Complete

31 Dec, 2026

-
-

IS 14333 (1996)

High Density Polyethylene Pipe For Sewerage -

11475 View breakup
Rs.8681/-, Rs.3044/- Raw material (After 25% discount for BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
10(Marking)	-	0	Nil
3(Designation)	-	0	Nil
4(Colour)	-	300	Nil
6(Dimensions of pipes)	-	250	Nil
7(Visual Appearance)	-	300	Nil
8.1(Hydraulic characteristics)	-	6400	Type test for 168 hrs = Rs. 4800/- and Acceptance test for 48 hrs = Rs. 1600/-
8.2(Reversion)	-	1000	Test charges Rs. 700 plus specimen charges Rs.300/- (25 % discount is not applicable in specimen charges)
8.3(Density)	-	500	Nil
8.4(Melt Flow Rate)	-	1100	Nil
Cl. 8.5, IS 2530-1963, Cl. 10(Cabon Black Content)	-	925	Nil
Cl. 8.5, IS 2530-1963, Cl. 16(Carbon Black Dispersion)	-	700	Nil

Complete

31 Dec, 2026

-
Upto 600 mm DN and excluding Chemical resistance classification (Annexure-D)

IS 14252 (2015)

Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sack for filling sand – Specification (second revision)

19140 View breakup
Rs.16903/- (After 25% discount for BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(Raw Material)	-	1050	Nil
3.2(Tapes – Width )	-	250	Nil
3.2(Tapes – Linear Density )	-	250	Nil
3.3(Tying Cord)	-	0	Charges already taken
3.3(Tying Cord)	-	0	Charges already taken
3.3(Tying Cord)	-	0	Charges already taken
3.4(Sack)	-	0	Charges already taken
3.4.1(Seam)	-	0	Charges already taken
3.4.1(Seam)	-	0	Charges already taken
3.4.1(Seam)	-	0	Charges already taken
3.4.1(Seam)	-	0	Charges already taken
4.1 and Table 1 i a(Dimensions Outside Length)	-	250	Nil
4.1 and Table 1 i b(Dimensions Outside Width)	-	0	Charges already taken in clause no. 4.1 and Table 1 i a
4.1 and Table 1 ii(Ends per dm )	-	250	Nil
4.1 and Table 1 iii(Picks per dm )	-	250	Nil
4.2 and Table 1 iv(Mass of sack )	-	300	Nil
4.1 and Table 1 v a(Average breaking strength of fabric Warpway )	-	1100	Nil
4.1 and Table 1 v b(Average breaking strength of fabric Weftway )	-	1100	Nil
4.1 and Table 1 vi(Average Breaking strength of bottom seam )	-	1100	Nil
4.1 and Table 1 vii a(Elongation at break of fabric Lengthwise)	-	1100	Nil
4.1 and Table 1 vii b(Elongation at break of fabric Widthwise )	-	1100	Nil
4.1 and Table 1 viii(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	10340	25% discount is not applicable in conditioning charges
4.1 and Table 1 ix(Ash content )	-	950	Nil

Complete

31 Dec, 2026

-
Included w.e.f. 29.06.2017.

IS 14151 : Part 1 (1999)

Irrigation equipment - Sprinkler pipes - Specification: Part 1 polyethylene pipes (First Revision)

23025.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.3(CLASSIFICATION OF PIPES)	-	0	Nil
4.1(melt flow rating (MFR) shall not exceed 1.10 g/10 min.)	-	1100.00	Nil
4.1.1(density shall be between 940.4 kg/m’ and 958.4 kg/m3 (both inclusive) when determined at 27°C according to procedure prescribed in Annex A of IS 7328. The value of the density shall also not differ from the nominal value by more than 3 kg/m2 as per 5.2.1.1 of IS 7328.)	-	1125.00	Test charges Rs. 500.00 plus specimen charges Rs. 625.00
4.1.2(The MFR of the material shall be between 0.2 to 1.1 (both inclusive) when tested at 190 T at a nominal load of 50 N by the method prescribed in 7 of IS 2530. The MFR of the material shall also be within 20% of the value declared by the manufacturer.’)	-	1100.00	Nil
Cl. 4.2 , IS 2530-1963, Cl. 10(Cabon Black Content)	-	925.00	Nil
4.3(Anti-oxidant)	-	0	Test facility is not available
5.1 table -1(DIMENSIONS OF PIPES)	-	500.00	Nil
5.1.2(Ovality)	-	0	Charges already taken in clause no. 5.1 TABLE-1 DIMENSIONS OF PIPES
6.1(VISUAL APPEARANCE)	-	300.00	Nil
7.1 Table -2(Hydraulic Characteristics)	-	0	Charges is taken in clause no. 7.1
7.2(Reversion Test)	-	1000	Test charges Rs. 700.00 + specimen charges Rs. 300.00
7.3(Tensile Test)	-	1350.00	Test charges Rs. 1100.00 + specimen charges Rs. 250.00
7.4table-2(Fusion Compatibility Test)	-	0	Charges is taken in clause no. 7.4 a) Quality test, b) Acceptance test
7.5(Density)	-	1125.00	Nil
7.6(Melt now Rate (MFR))	-	1100.00	Nil
(Cl.4.2)(Carbon black- b) Dispersion of carbon black)	-	700.00	NIL
Cl.5(Dimensions of pipe - i) Outside diameter)	-	0	Charges already taken in clause no. 5.1 TABLE-1 DIMENSIONS OF PIPES
Cl.5(Dimensions of pipe - ii) Wall thickness minimum)	-	0	Charges already taken in clause no. 5.1 TABLE-1 DIMENSIONS OF PIPES
Cl.5(Dimensions of pipe - ii) Wall thickness maximum)	-	0	Charges already taken in clause no. 5.1 TABLE-1 DIMENSIONS OF PIPES
Cl 7.1(Hydraulic Characteristics - Acceptance test)	-	1600.00	-
Cl 7.1(Hydraulic Characteristics - Quality test)	-	4800.00	-
Cl.7.2)(Reversion Test)	-	0	Charges already taken in clause no. 7.2
Cl.7.3(Tensile Test- i) Tensile Strength)	-	0	Charges is already taken in clause no. 7.3
Cl.7.3(Tensile Test - ii)Elongation at Break)	-	0	Charges is already taken in clause no. 7.3
Cl.7.4(Fusion Compatibility Test- a) Quality test)	-	1600.00	-
Cl.7.4(Fusion Compatibility Test- b) Acceptance test)	-	4800.00	-

Complete

31 Dec, 2026

-
EXCLUSION: Antioxidant test (Cl.4.3)

IS 13592 (2013)

Unplasticized Polyvinyl Chloride (PVC-U) Pipes for Soil and Waste Discharge System Inside and Outside Buiildings Including Ventilation and Rainwater System

17800 View breakup
Type-A: Rs.12400/-, Rs.825/- for PVC Resin, Rs.21800/- for Alternate (Optional); Type-B: Rs.12725/-, Rs.825/- for PVC Resin, Rs.21800/- for alternate (After 25% discount for BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.5(Surface colour of the pipes shall be dark shade of grey)	-	300	Nil
Cl6.3(The composition shall be based on PVC resin having a K-value of 64 or greater when tested in accordance with IS 4669)	-	1100	Nil
Cl.7.1(Mean outside diameter, outside diameter at any point for Type A and Type B pipes manufactured plain or with socket shall be as given in Table 1. Dimensions shall be measured according to the method given in IS 12235 (Part 1).)	-	500	Nil
Cl.7.1( outside diameter at any point for Type A and Type B pipes manufactured plain or with socket shall be as given in Table 1. Dimensions shall be measured according to the method given in IS 12235 (Part 1).)	-	0	Charges already taken in clause no. 7.1
Cl.7.1( wall thickness at any point for Type A and Type B pipes manufactured plain or with socket shall be as given in Table 1. Dimensions shall be measured according to the method given in IS 12235 (Part 1).)	-	0	Charges already taken in clause no. 7.1
Cl.7.2(Pipes shall be supplied in nominal lengths of 2, 3, 4 or 6 metres either plain or with socket for solvent cementing/grooved socket. Tolerances on specified length shall be + 10 mm and – 0 mm.The nominal length of the pipe with socket for solvent cementing/grooved socket shall be as given in Fig. 1.)	-	0	Charges already taken in clause no. 7.1
Cl.7.3.1(Minimum wall thickness of socket on pipes shall be as given in Table 2 read with Fig. 2 and Fig. 3.)	-	0	Charges already taken in clause no. 7.1
Cl.7.3.2(Dimensions of sockets for solvent cementing and grooved sockets of pipes shall be as given in Tables 3 and 4 respectively, read with Fig. 2 and 3.)	-	0	Charges already taken in clause no. 7.1
Cl.8.1(The internal and external surface of the pipes shall be smooth and clean, and free from grooving and other defects. The end shall be clearly cut and shall be square with the axis of the pipe. The end may be chamfered on the plain side.)	-	300	Nil
Cl.8.2(When tested by the method described in IS 12235 (Part 5), a length of pipe sample of 200 ± 20 mm shall not alter in length by more than 5 percent. In the case of socket ended pipes, this test shall be carried out on the plain portion of pipe taken at least 100 mm away from the root of the socket.)	-	1000	Test charges Rs. 700/- plus specimen charges Rs. 300/- (25% discount is not applicable in specimen charges)
Cl8.3(This test shall be carried out for socket end pipes only. When tested by the method described in IS 12235 (Part 6), the test specimens shall not show blisters, excessive delamination or cracking or signs of weld line splitting.)	-	700	Nil
Cl.8.4(When determined in accordance with IS 12235 (Part 2), the vicat softening temperature of the specimen shall not be less than 79°C.)	-	1100	Nil
Cl.8.5(After the required period of exposure, the tensile strengths of two samples when tested as per IS 12235 (Part 13) shall not show difference of more than 20 percent of their initial tensile strengths)	-	3500	Nil
Cl. 9, IS 12235 Part 7(Resistance to Sulphuric Acid)	-	2500	Test charges Rs. 2000/- plus specimen charges Rs. 500/- (25% discount is not applicable in specimen charges)
Cl.10.1(When tested by method prescribed in IS 12235 (Part 9),the pipe shall have a true impact rate of not more than 10 percent. Mass of striker and height of fall shall be as per Annex A.)	-	1400	Test charges Rs. 1100/- plus specimen charges Rs. 300/- (25% discount is not applicable in specimen charges)
Cl.10.2(When determined in accordance with the method described in IS 12235 (Part 13), the tensile strength at break shall not be less than 45 MPa.)	-	2700	Test charges Rs. 2200/- plus specimen charges Rs. 500/- (25% discount is not applicable in specimen charges)
Cl.10.3(The axial shrinkage shall not exceed 2 percent when determined in accordance with Annex B.)	-	700	Nil
Cl.11.(Jointing of solvent cementing joints is to be carried out using solvent conforming to IS 14182. Apply a pressure of 0.05 MPa for a period of 15 min and there should be no leakage at any joint.)	-	1000	Nil
Cl. 12, IS 12235 Part 11(Resistance to Di-Chloro-Methane)	-	1000	Nil

Complete

31 Dec, 2026

-
0.0

IS 13488 (2008)

Irrigation equipment - Emitting pipe systems - Specification (First Revision)

13900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1.2 (Ref. Cl 4.1.c.i of IS 12786 : 1989)(Density)	-	1125	Test charges Rs.500/- plus specimen charges Rs. 625/- (25% discount is not applicable in specimen charges)
5.1.2 (Ref. Cl 4.1.c.iii of IS 12786 : 1989)(Volatile matter - Annex B of IS 12786:1989)	-	700	Nil
5.1.2 (Ref. Cl 4.1.c & 4.2.a of IS 12786 : 1989)(Carbon Black content - IS 2530 : 1963)	-	925	Nil
5.1.2 (Ref. Cl 4.2.b of IS 12786 : 1989)(The dispersion of Carbon Black content shall be satisfactory - IS 2530 : 1963)	-	700	Nil
6.2.2(Fittings)	-	0	Nil
6.3(General)	-	300	Nil
6.3(General)	-	0	Charges already taken in clause no. 6.3
8.1.2(Uniformity of Emission Rate for Unregulated Emitting Pipes)	-	1000	Nil
8.1.3(Uniformity of Emission Rate for Regulated Emitting Pipes)	-	0	Charges already taken in clause no. 8.1.2
8.2(Emission Rate of Emitting Unit as a Function of Inlet Pressure)	-	1000	Nil
8.2.1(Unregu/Qt~d Emining Pipe)	-	0	Charges already taken in clause no. 8.2
8.2.2(Regulated Emitting Pipes)	-	0	Charges already taken in clause no. 8.2
8.3.1(Wall Thickness ofEmitting Pipe)	-	400	Nil
8.3.2(Inside Diameter ofEmitting Pipe)	-	0	Charges already taken in clause no. 8.3.1
8.3.3(Flow Paths in Emitting Unit)	-	0	Charges already taken in clause no. 8.3.1
8.3.4(Spacing ofEmitter Units)	-	0	Charges already taken in clause no. 8.3.1
8.4.1(Resistance to Hydrostatic Pressure at Ambient Temperature)	-	1000	Nil
8.4.2(Resistance to Hydrostatic Pressure at Elevated Temperature)	-	160	Nil
8.5(Resistance to Tension at Elevated Temperature)	-	1100	Nil
8.5(Resistance to Tension at Elevated Temperature)	-	0	Charges already taken in clause no. 8.5
8.5(Resistance to Tension at Elevated Temperature)	-	0	Charges already taken in clause no. 8.5
8.6(Resistance to Pull Out of Joints Between Fitting and Emitting IS 13479)	-	400	Nil
8.7.1(Resistance of PE Emitting Pipe to Environmental Stress Cracking -Acceptance Test Annex D of IS 12786)	-	1200	Nil
8.7.2(Resistance of PE Emitting Pipe to Environmental Stress Cracking - Type Test Annex D of IS 12786)	-	1600	Nil
8.8(Determination of Emitting Unit Exponent)	-	600	Nil

Complete

31 Dec, 2026

-
-

IS 13422 (1992)

Disposable surgical rubber gloves specification

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.4(Sterility)	-	2000	Nil
4(TYPES)	-	0	Nil
5.2.1(General Characteristics and Dimensions)	-	250	Nil
5.2.2 and Table 1 Fig. 1(Dimensions - Length)	-	250	Nil
5.2.2 and Table 1 Fig. 1(Dimensions - Width)	-	250	Nil
5.2.2 and Table 1 Fig. 1(Dimensions - Thickness of Finger)	-	250	Nil
5.2.2 and Table 1 Fig. 1(Dimensions - Thickness of Palm)	-	0	Charges already taken in clause no. 5.2.2
5.2.2 and Table 1 Fig. 1(Dimensions - Thickness of Cuff)	-	0	Charges already taken in clause no. 5.2.2
5.3 and Table 2( Tensile Strength Before Ageing)	-	1350	Nil
5.3 and Table 2( Elongation at Break Before Ageing)	-	0	Charges already taken in clause no. 5.3
5.3 and Table 2(Stress at 500% Elongation at Break Before Ageing)	-	5300	Test charges Rs. 1100/- plus conditioning charges Rs. 4200/- (25% discount is not applicable in conditioning charges)
5.3 and Table 2( Tensile StrengthAfter Accelerated Ageing)	-	0	Charges already taken in clause no. 5.3
5.3 and Table 2( Elongation at Break After Accelerated Ageing)	-	0	Charges already taken in clause no. 5.3
5.5(Airtight Test)	-	1300	Test charges Rs. 1000/- plus specimen charges Rs. 300/- (25% discount is not applicable in conditioning charges)

Complete

31 Dec, 2026

-
Included w.e.f. 27-05-2022.

IS 13487 (1992)

Irrigation equipment - Emitters - Specification

4700 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1(Construction and workmanship)	-	300	Nil
7.2(Flow path in emitters)	-	300	Nil
7.3.1(Resistance to Hydrostatic pressure)	-	1000	Nil
7.3.2(Resistance to Hydrostatic pressure)	-	0	Charges already taken in clause no. 7.3.1
7.3.3(Resistance to Hydrostatic pressure)	-	0	Charges already taken in clause no. 7.3.1
7.4.1(Emitter Pull Out In-line emitters)	-	500	Nil
7.4.2(Emitter Pull Out On-line emitters)	-	0	Charges already taken in clause no. 7.4.1
8.1.2(Uniformity of Emission Rate Unregulated emitters)	-	1000	Nil
8.1.2(Uniformity of Emission Rate Unregulated emitters)	-	0	Charges already taken in clause no. 8.1.2
8.1.3(Uniformity of Emission Rate Regulated emitters)	-	0	Charges already taken in clause no. 8.1.2
8.1.3(Uniformity of Emission Rate Regulated emitters)	-	0	Charges already taken in clause no. 8.1.2
8.2.2(Emission rate as a function of inlet pressure Unregulated emitters)	-	1000	Nil
8.2.3(Emission rate as a function of inlet pressure Regulated emitters)	-	0	Charges already taken in clause no. 8.2.2
8.3(Determination of Emitter Exponent)	-	600	Nil

Complete

31 Dec, 2026

-
-

IS 12818 (2010)

Unplasticized polyvinyl chloride (Pvc - U) screen and casing pipes for bore/tubewells - Specification (Second Revision)

14725 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(COLOUR)	-	250	Nil
4.1.1 (Ref. 3.4.1. of IS 10151)(Composition - The monomer content (VCM content) in the resin - Annex A ofIS 10151)	-	3000	Nil
4.1.2 (Ref. Cl 5.1. of IS 4669)(Composition - Loss on heating )	-	1100	Nil
4.1.2 (Ref. Cl 11 of IS 4669)(Composition -Sulphated ash content )	-	0	Nil
7.1 and Table 1, 2, 3, & 4 Fig 1A & 1B(Nominal Diameter)	-	1500	Nil
7.1 and Table 1, 2, 3, & 4 Fig 1A & 1B(Mean Outer Diameter of Pipe)	-	0	Charges already taken in clause no. 7.1 Table 1
7.1 and Table 1, 2, 3, & 4 Fig 1A & 1B(Outer Diameter at any point )	-	0	Charges already taken in clause no. 7.1 Table 1
7.1 and Table 1, 2, 3, & 4 Fig 1A & 1B(Mean Outer Diameter over Connection)	-	0	Charges already taken in clause no. 7.1 Table 1
7.1 and Table 1, 2, 3, & 4 Fig 1A & 1B(Wall thickness)	-	0	Charges already taken in clause no. 7.1 Table 1
7.2 and Table 5, 6 & 7 Fig 1B(DIMENSIONS - Casing Pipes)	-	0	Charges already taken in clause no. 7.1 Table 1
7.2 and Table 5, 6 & 7 Fig 1B(Nominal Diameter)	-	0	Charges already taken in clause no. 7.1 Table 1
7.2 and Table 5, 6 & 7 Fig 1B(Mean Outer Diameter of Pipe, Min)	-	0	Charges already taken in clause no. 7.1 Table 1
7.2 and Table 5, 6 & 7 Fig 1B(Mean Outer Diameter of Pipe , Max)	-	0	Charges already taken in clause no. 7.1 Table 1
7.2 and Table 5, 6 & 7 Fig 1B(Outer Diameter at any point , Min)	-	0	Charges already taken in clause no. 7.1 Table 1
7.2 and Table 5, 6 & 7 Fig 1B(Outer Diameter at any point, Max)	-	0	Charges already taken in clause no. 7.1 Table 1
7.2 and Table 5, 6 & 7 Fig 1B(Mean Outer Diameter over Connection)	-	0	Charges already taken in clause no. 7.1 Table 1
7.2 and Table 5, 6 & 7 Fig 1B(Wall thickness, Min)	-	0	Charges already taken in clause no. 7.1 Table 1
7.2 and Table 5, 6 & 7 Fig 1B(Wall thickness, Max)	-	0	Charges already taken in clause no. 7.1 Table 1
7.3.1(No.of Ribs)	-	0	Charges already taken in clause no. 7.1 Table 1
7.3.2(Rib height)	-	0	Charges already taken in clause no. 7.1 Table 1
7.4 Table 8 & 9 Fig 1(Effective length, l2)	-	0	Charges already taken in clause no. 7.1 Table 1
7.4 Table 8 & 9 Fig 1(Segmental length, l3)	-	0	Charges already taken in clause no. 7.1 Table 1
7.4 Table 8 & 9 Fig 1(Segmental length, l4)	-	0	Charges already taken in clause no. 7.1 Table 1
7.4 Table 8 & 9 Fig 1(Segmental length, l5)	-	0	Charges already taken in clause no. 7.1 Table 1
7.5 and Table 10 Fig 2A & 2B(Summation of slot lengths over internal circumference of the cross- section.)	-	0	Charges already taken in clause no. 7.1 Table 1
7.5 and Table 10 Fig 2A & 2B(Minimum number of slots on the circumference of the cross-section.)	-	0	Charges already taken in clause no. 7.1 Table 1
7.5 and Table 10 Fig 2A & 2B(Approximate Free Passage Area, in Percent (Mean Value) for Width of Slot (w))	-	0	Charges already taken in clause no. 7.1 Table 1
8.4(Sealing rings - Hardness)	-	375	Nil
8.4.1 and Table 13 Fig 3B & 4B(Dimensions of sealing elements)	-	250	Nil
8.4.1 and Table 13 Fig 3B & 4B(Dimensions of sealing elements)	-	0	Charges already taken in clause no. 8.4.1
8.4.1 and Table 13 Fig 3B & 4B(Dimensions of sealing elements)	-	0	Charges already taken in clause no. 8.4.1
8.4.1 and Table 13 Fig 3B & 4B(Dimensions of sealing elements)	-	0	Charges already taken in clause no. 8.4.1
8.4.1 and Table 13 Fig 3B & 4B(Dimensions of sealing elements)	-	0	Charges already taken in clause no. 8.4.1
8.4.1 and Table 13 Fig 3B & 4B(Dimensions of sealing elements)	-	0	Charges already taken in clause no. 8.4.1
8.4.1 and Table 13 Fig 3B & 4B(Dimensions of sealing elements)	-	0	Charges already taken in clause no. 8.4.1
9.1(Visual Appearance)	-	300	Nil
9.1( Visual Appearance)	-	0	Charges already taken in clause no. 9.1
9.2(Internal Diameter)	-	350	Nil
9.3(Density IS 12235 (Part 14))	-	500	Nil
9.4 and Table 14(Resistance to External Blows at 0 ?C IS 12235 (Part 9))	-	1400	Test charges Rs. 1100/- plus specimen charges Rs. 300/- (25% discount is not applicable in specimen charges)
9.5(Tensile Strength IS 12235(Part 13))	-	1600	Test charges Rs. 1100/- plus specimen charges Rs. 500/- (25% discount is not applicable in specimen charges)
9.6(Vicat Softening Temperature IS 12235 (Part 2).)	-	1100	Nil

Complete

31 Dec, 2026

-
-

IS 12786 (1989)

Irrigation equipment - Polyethylene pipes for irrigation laterals - Specification

9725.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1.c.i (Density)	-	0	-
4.1.c.iii (Volatile matter - Annex B )	-	0	-
4.1.c & 4.2.a (Carbon Black content - IS 2530 : 1963)	-	925	Nil
4.2.b (The dispersion of Carbon Black content shall be satisfactory - IS 2530 : 1963)	-	700	Nil
7.3(Tensile Test)	-	1350	Test Charges Rs. 1100/- + Specimen charges Rs. 250/-
7.3(Elongation at Break)	-	0	Charges already taken in tensile test (Clause no. 7.3)
7.4(SusceptibiIity to Environmental Stress Cracking)	-	1200	Nil
5 and Table 1(DIMENSIONS OF PIPES - outside diameters)	-	250	-
5 and Table 1(DIMENSIONS OF PIPES - wall thickness shall)	-	0	Charges already taken in clause 5 and table 1 (DIMENSIONS OF PIPES - outside diameters)
6.1(Visual Appearance)	-	300	-
7.1(Hydraulic Characteristics)	-	3000	Quality test
7.1(Hydraulic Characteristics)	-	1000	acceptance test
7.2(Reversion Test)	-	1000	Testing charge 700.00+ specimen charge 300.00
5 and Table 1(DIMENSIONS OF PIPES - wall thickness shall)	-	0	-

Complete

31 Dec, 2026

-
EXCLUSION: Antioxidant test (Cl.4.1)

IS 12785 (1994)

Irrigation equipment - Strainer - Type filters - Specification (first revision)

11250 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1.1(Zinc Coating - IS 4736)	-	0	Nil
4.1.1(General)	-	500	Nil
4.1.1(General)	-	0	Charges already taken in clause no. 4.1.1
4.1.1(General)	-	0	Charges already taken in clause no. 4.1.1
4.1.1(General)	-	0	Charges already taken in clause no. 4.1.1
4.1.1(General)	-	0	Charges already taken in clause no. 4.1.1
4.1.1(General - The hot dip galvanizing shall be done in accordance with IS 4736 with a minimum zinc coating)	-	0	Charges already taken in clause no. 4.1.1
4.1.1(General - Thickness of powder coating IS 5116.)	-	0	Charges already taken in clause no. 4.1.1
4.1.2(General)	-	0	Charges already taken in clause no. 4.1.1
4.1.2(General)	-	0	Charges already taken in clause no. 4.1.1
4.1.3(General)	-	0	Charges already taken in clause no. 4.1.1
4.1.4(General)	-	0	Charges already taken in clause no. 4.1.1
4.2.1(Strainer Housing)	-	500	Nil
4.2.2(Strainer Housing)	-	0	Charges already taken in clause no. 4.2.1
4.2.3(Strainer Housing)	-	0	Charges already taken in clause no. 4.2.1
4.3.1(Connections IS 2643 : 1975.)	-	500	Nil
4.3.2(Connections IS 6418 : 1971)	-	0	Charges already taken in clause no. 4.3.1
4.3.3(Connections)	-	0	Charges already taken in clause no. 4.2.1
4.3.4(Connections)	-	0	Charges already taken in clause no. 4.2.1
6.1(MECHANiCAL TESTS)	-	1500	Nil
6.1(MECHANiCAL TESTS)	-	0	Charges already taken in clause no. 6.1
6.2(MECHANiCAL TESTS )	-	3750	Nil
6.3(MECHANiCAL TESTS )	-	1000	Nil
6.4(MECHANiCAL TESTS )	-	1000	nIL
6.5(MECHANiCAL TESTS )	-	2500	Nil

Complete

31 Dec, 2026

-
Included w.e.f. 27-05-2022.

IS 12701 (1996)

Rotational moulded polyethylene water storage tanks - specification (First Revision)

17150.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2.3(Carbon Black Content )	-	925	Nil
4.2.3(Carbon Dispersion Test)	-	700	Nil
5(Types and Features )	-	0	Nil
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	3050	Nil
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	0	Charges already taken in clause no. 5.1 Table 1
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	0	Charges already taken in clause no. 5.1 Table 1
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	0	Charges already taken in clause no. 5.1 Table 1
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	0	Charges already taken in clause no. 5.1 Table 1
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	0	Charges already taken in clause no. 5.1 Table 1
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	0	Charges already taken in clause no. 5.1 Table 1
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	0	Charges already taken in clause no. 5.1 Table 1
5.2 Table 2(Dimensions of Rectangular Loft Tanks)	-	0	Charges already taken in clause no. 5.1 Table 1
5.2 Table 2(Dimensions of Rectangular Loft Tanks)	-	0	Charges already taken in clause no. 5.1 Table 1
5.2 Table 2(Dimensions of Rectangular Loft Tanks)	-	0	Charges already taken in clause no. 5.1 Table 1
5.2 Table 2(Dimensions of Rectangular Loft Tanks)	-	0	Charges already taken in clause no. 5.1 Table 1
5.2 Table 2(Dimensions of Rectangular Loft Tanks)	-	0	Charges already taken in clause no. 5.1 Table 1
5.2 Table 2(Dimensions of Rectangular Loft Tanks)	-	0	Charges already taken in clause no. 5.1 Table 1
5.2 Table 2(Dimensions of Rectangular Loft Tanks)	-	0	Charges already taken in clause no. 5.1 Table 1
5.2 Table 2(Dimensions of Rectangular Loft Tanks)	-	0	Charges already taken in clause no. 5.1 Table 1
5.3(Types and Features )	-	0	Charges already taken in clause no. 5.1 Table 1
5.6(Types and Features )	-	0	Charges already taken in clause no. 5.1 Table 1
6.1(Finish)	-	300	Nil
7.1.1(Resistance to Deformation)	-	700	Nil
7.1.2(Resistance to Deformation)	-	0	Charges already taken in clause no. 7.1.1
7.2(Resistance to Impact)	-	1100	Nil
7.3(Test for Top Load Resistance)	-	900	Nil
7.4(Tensile Strength)	-	1350	Testing charges Rs.1100/- + specimen charges Rs.250/-
7.5(Flexural Modulus)	-	1600	Testing charges Rs.1100/- plus specimen charges Rs.500/- (25% discount is not applicable in specimen charges)
7.6(overall Migration)	-	2200	Testing charges Rs.1700/- + specimen charges Rs.500/-

Complete

31 Dec, 2026

-
-

IS 12585 (1988)

Specification for thermoplastic hoses (Textile Reinforced) for water - General purpose

6500 View breakup
Rs.4875/- (After 25% discount for BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 3(Types)	-	0	Nil
Cl 4.1(Construction)	-	300	Nil
Cl 4.2(Dimensions & Tolerances)	-	500	Nil
Cl 4.3.1 & Appendix A(Loss in Mass on Heating)	-	700	Nil
Cl 4.3.2(Adhesion)	-	1100	Nil
Cl 4.3.3(Pressure Requirements)	-	1700	Nil
Cl 4.3.4(Minimum Bend Radius)	-	700	Nil
Cl 4.3.5(Low Temperature Flexibility)	-	1500	Nil

Complete

31 Dec, 2026

-
0.0

Bureau of Indian Standards

The National Standards Body of India

CENTRAL INSTITUTE OF PETROCHEMICALS ENGINEERING AND TECHNOLOGY (CIPET):CSTS-BHOPAL

G SECTOR, GOVINDPURA INDUSTRIAL AREA, J. K. ROAD, BHOPAL, BHOPAL, Bhopal, Madhya Pradesh, 462023

7869955244 cipet.bhopal@gmail.com

Scope List

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found