BIS - LIMS (Laboratory Information Management System)

CENTRAL INSTITUTE OF PETROCHEMICALS ENGINEERING AND TECHNOLOGY (CIPET):CSTS-BHOPAL

G SECTOR, GOVINDPURA INDUSTRIAL AREA, J. K. ROAD, BHOPAL, BHOPAL, Bhopal, Madhya Pradesh, 462023

7869955244 cipet.bhopal@gmail.com

Scope List

Reset

108 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

IS 4572 (2014)

Fibre ropes – Polyamide 3- 4- 8- and 12-Strand ropes

5500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.5.1 Polyamide ropes( shall be made in one of the following constructions: — type A: 3-strand hawser-laid rope (see Figure 1); — type B: 4-strand shroud-laid rope (see Figure 2); — type L: 8-strand braided rope (see Figure 3); — type T: 12-strand braided rope (see Figure 4).)	-	3150	Testing Charge for the clauses 5.1 to 5.5
Cl.6 Tables 1, 2 and 3.(Cl.Linear density and minimum breaking force shall be in accordance with Tables 1, 2 and 3.)	-	2350	Testing Charge for the clauses 6.1 to 6.3
Cl.5.1 Polyamide ropes( shall be made in one of the following constructions: — type A: 3-strand hawser-laid rope (see Figure 1); — type B: 4-strand shroud-laid rope (see Figure 2); — type L: 8-strand braided rope (see Figure 3); — type T: 12-strand braided rope (see Figure 4).)	-	0	Testing Charges is taken in the clause 5.1
Cl.6 Tables 1, 2 and 3.(Cl.Linear density and minimum breaking force shall be in accordance with Tables 1, 2 and 3.)	-	0	Testing Charges is taken in the clause 6
Cl.5.1 Polyamide ropes( shall be made in one of the following constructions: — type A: 3-strand hawser-laid rope (see Figure 1); — type B: 4-strand shroud-laid rope (see Figure 2); — type L: 8-strand braided rope (see Figure 3); — type T: 12-strand braided rope (see Figure 4).)	-	0	Testing Charges is taken in the clause 5.1
Cl.6 Tables 1, 2 and 3.(Cl.Linear density and minimum breaking force shall be in accordance with Tables 1, 2 and 3.)	-	0	Testing Charges is taken in the clause 6

31 Dec, 2026

-
-

IS 16205 : Part 24 (2017)

Conduit Systems for Cable Management part 24 Particular Requirements Conduit Systems Buried Under Ground

16375 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8 Table 101(Dimensions)	-	250	NIL
8 Table 101(Dimensions)	-	0	Testing charge is already taken in clause 8.0 table 101 (Dimensions)
9.1 of IS 16205 (Part 1) : 2017(Construction)	-	300	Nil
10.1(Mechanical Strength)	-	1600	1100 testing charge+500 conditioning/specimen charge (25% discount is not applicable to conditioning/specimen charge)
10.2(Compression Test)	-	0	Testing charge is already taken in clause 10.1 (mechanical strength)
10.3(Impact Test)	-	1600	1100 testing charge+500 conditioning/specimen charge (25% discount is not applicable to conditioning/specimen charge)
10.4(Bending Test)	-	2000	Nil
13.1.3(Spread of fire)	-	3650	NIL
14.0(External Influences)	-	10000	NIL
15.0(Electromagnetic Compatibility)	-	300	NIL
6.1.4 of IS 16205 (Part 1) : 2017(Classification - Tensile Strength)	-	1350	-
6.1.5 of IS 16205 (Part 1) : 2017(Classification - Suspended Load Capacity)	-	0	-
6.1.4 of IS 16205 (Part 1) : 2017(Mech)(Classification - Tensile Strength)	-	0	-

31 Dec, 2026

-
-

IS 13410 (1992)

Glass reinforced polyester sheet moulding compounds(Smc) - Specification

- View breakup
Rs.24825/- (After 25% discount for BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

31 Dec, 2026

-
For S1 & S2 grade only

IS 14151 : Part 2 (2008)

Irrigation equipment - Sprinkler pipes - Specification: Part 2 quick coupled polyethylene pipes and fittings (Second Revision)

42575.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(QUICK COUPLED PIPES)	-	925.00	Test charges for Carbon Black Content test
Cl.3(Quick Coupled pipes)	-	700.00	Charges for Carbon Black dispersion test
4.1 (b)(HDPE couplers —)	-	1000.00	Charges for Density (Male and female both)
Cl. 4.1.1.2.1, IS 14151 (P-1)-1999, Cl. 4, IS 2530-1963, Cl. 10(Cabon Black Content)	-	1850.00	Charges for Melt flow rate (both male and female)
Cl. 4.1.1.2.1, IS 14151 (P-1)-1999, Cl. 4, IS 2530-1963, Cl. 16(Carbon Black Dispersion)	-	1400.00	-
4.1 .1.2.1(HDPE couplers)	-	2200.00	Melt flow rate (both male and female)
4.1 .3(Workmanship and Appearance)	-	300.00	-
4.1.4(b)(Holding Attachments for Coupler Parts)	-	0	-
4.1.5(Rubber Ring)	-	1050.00	Material Identification
Cl 4.1.5(Rubber rings- A)Shore hardness (Shore-A))	-	375.00	-
Cl 4.1.5(Rubber rings- B) Change in hardness)	-	4575.00	Test charges Rs. 375.00 + ageing charges for rubber ring Rs. 4200.00
Cl 4.1.5(Rubber rings- C)Rubber ring shall be of black colour:)	-	300.00	-
4.2.7(1 Dimensions of Quick Coupled Pipes and Fittings)	-	500.00	-
6.1.1, 6.1.1.1(Leakage Test)	-	850.00	-
6.1.2, 6.1.2.1( Hydraulic Proof Test)	-	850.00	-
6.1.2.2( Hydraulic Proof Test)	-	0	test charges is already taken in 6.1.2, 6.1.2.1 (Hydraulic Proof Test)
6.1.3, 6.1.3.1(Weldability Test)	-	1600.00	-
6.1.3.1.1(Weldability Test)	-	4800.00	-
6.1.3.2 (Quick coupled fittings)	-	0	-

31 Dec, 2026

-
EXCLUSION: Metallic part (4.1.1)

IS 16008 : Part 2 (2016)

Agro textiles “ Shade nets for agriculture and horticulture purposes “ Specification Part 2 Shade nets made from mono filament yarns (first revision)

22760.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.0(Material)	-	1050	Nil
4.1(HDPE Mono filament)	-	2500.00	Nil
4.1(HDPE Mono filament)	-	500.00	Nil
4.1.1(HDPE Mono filament)	-	700.00	Nil
4.2(Fabric)	-	500.00	Nil
4.3(Colour)	-	300.00	Nil
5.0(Types)	-	1000.00	Nil
6.1(Dimensions and mass)	-	250.00	Nil
6.2(Dimensions and mass)	-	250.00	Nil
6.2 Table 1(Mass g/m2,Min)	-	250.00	Nil
6.2 Table 1(Average breaking strength of shade nets fabric (Strip method,Warpway,Weftway 325 mm × 50 mm test piece with gauge length of 200 mm), N, Min )	-	2200.00	Nil
6.2 Table 1(Warpway Weftway)	-	2200.00	Nil
6.2 Table 1(Retention of breaking strength after UV exposure, N, Min)	-	8260.00	-
6.2 Table 1(Colour fastness to artificial light1)	-	850.00	Nil
6.2 Table 1(Bursting pressure, kgf/cm2, Min)	-	1000.00	Nil
6.2 Table 1(Shading %)	-	700.00	Nil

31 Dec, 2026

-
-

IS 16008 : Part 1 (2016)

Agro textiles “ Shade nets for agriculture and horticulture purposes “ Specification Part 1 Shade nets made from tape yarns (first revision)

22760.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.0(Types)	-	1000.00	Nil
6.1(Dimensions and Mass - IS 1954)	-	250	Nil
6.1(Dimensions and Mass - IS 1954)	-	250	Nil
6.2 Table 1(Mass - IS 1964)	-	250	Nil
6.2 Table 1(Average breaking strength of shade nets fabric (Strip method, 325 mm x 50 mm test piece with gauge length of 200 mm) - IS 1969 (Part 1))	-	2200	Nil
6.2 Table 1(Average breaking strength of shade nets fabric (Strip method, 325 mm x 50 mm test piece with gauge length of 200 mm) - IS 1969 (Part 1))	-	2200	Nil
6.2 Table 1(Retention of breaking strength after UV exposure - IS 1969 (Part 1))	-	8260	25% discount is not application in conditioning charges
6.2 Table 1(Colour fastness to artificial light, IS 2454)	-	850	Nil
6.2 Table 1(Bursting Pressure, IS 1966 (Part 1 or 2))	-	1000	Nil
6.2 Table 1(Shading Percentage)	-	700	Nil

31 Dec, 2026

-
-

IS 14928 (2001)

Textiles - Composite synthetic fibre ropes - Specification

3050 View breakup
Rs.2538/- (After 25% discount for BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

31 Dec, 2026

-
-

IS 14929 (2001)

Textiles - High strength polyolefins copolymer ropes - Specification

5250 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(MANUFACTURE)	-	2000	NIL
5.2.1(Construction)	-	300	NIL
5.2.2(Construction)	-	0	CHARGES ALREADY HAS TAKEN IN CLAUSE NO. 5.2.1
5.2.3(Construction)	-	0	CHARGES ALREADY HAS TAKEN IN CLAUSE NO. 5.2.1
5.3(Structure)	-	300	NIL
5.4( Rope)	-	300	NIL
6.1, Table 1 /Table 2.( REQUIREMENTS:- Linear Density)	-	500	NIL
6.1, Table 1 /Table 2.( Breaking Strength, Min)	-	1100	NIL
6.2, Table 1 and Table 2( Mass of the Coil)	-	250	NIL
6.3( Length of Coil)	-	250	NIL
8.1 (a)( MARKING)	-	250	NIL
8.1 (b)( MARKING)	-	0	CHARGES ALREADY HAS TAKEN IN CLAUSE NO. 8.1
8.1 (c)( MARKING)	-	0	CHARGES ALREADY HAS TAKEN IN CLAUSE NO. 8.1
8.1 (d)( MARKING)	-	0	CHARGES ALREADY HAS TAKEN IN CLAUSE NO. 8.1
8.1 (e)( MARKING)	-	0	CHARGES ALREADY HAS TAKEN IN CLAUSE NO. 8.1

31 Dec, 2026

-
-

IS 15265 (2003)

Flexible pvc pipes or polymer reinforced thermoplastic hoses for suction and delivery lines of agricultural pumps - Specification

29475 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1 Table 1(Internal Diameter)	-	250	-
5.2 Table 2(Length)	-	0	Test charges has already been taken in cl . no. 5.1
6.1 Table 3(Hydrostatic test atatmospheric condition)	-	1000	-
6.2 Table 4(Hydrostatic test at 55± 2°C)	-	1000	-
6.3(Pressure Impulse Test Annex B)	-	15000	-
6.4(Vaccum Test requirement Annex C)	-	2000	-
6.5(Reinforce Facture Test Requirement Annex D)	-	1000	-
6.6(Minimum Bend Radius Requirement- Annex E )	-	1000	-
6.7(Cold Bend Radius Requirement- Annex E )	-	2500	-
6.8(Loss in Mass on Heating- Annex F)	-	1925	-
6.9(Effect of Sunlight)	-	3500	-

31 Dec, 2026

-
-

IS 15328 (2003)

Unplasticized Non-Pressure Polyvinyl Chloride ( PVC -U ) Pipes for use in Underground Drainage and Sewerage Systems -

26800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5,5.2(Composition of the material The material shall contain a minimum of 0.3 percent of rutile grade titanium dioxide.)	-	1200	-
6.1,6.1.1 IS 12235 (Part 1) Table 1(Dimension of Pipes: Mean outside Diameter, dem)	-	500	-
6.1,6.1.1 IS 12235 (Part 1) Table 1(Outside Diameter at any point, de)	-	0	THE TESTING CHARGES HAS BEEN TAKEN ALREADY IN CLAUSE NO. 6.1, 6.1.1 .
6.1.2 IS 4985 Table 2(Wall Thickness, e )	-	0	THE TESTING CHARGES HAS BEEN TAKEN ALREADY IN CLAUSE NO. 6.1, 6.1.1 .
6.1.3 (Length of Pipe)	-	0	THE TESTING CHARGES HAS BEEN TAKEN ALREADY IN CLAUSE NO. 6.1, 6.1.1 .
6.1.4, Table 3(Dimensions of integral sockets and spigot ends :- a) Elastomeric Sealing Ringsockets and spigot ends i)Meean inside dia. Of socket, dsm)	-	0	THE TESTING CHARGES HAS BEEN TAKEN ALREADY IN CLAUSE NO. 6.1, 6.1.1 .
6.1.4, Table 3(ii) Min. depth of engagement, A. )	-	0	THE TESTING CHARGES HAS BEEN TAKEN ALREADY IN CLAUSE NO. 6.1, 6.1.1 .
6.1.4 Table 3(iii) Depth of sealing Zone C )	-	0	THE TESTING CHARGES HAS BEEN TAKEN ALREADY IN CLAUSE NO. 6.1, 6.1.1 .
6.1.4, Table 3(iv) Length of spigot, l1)	-	0	THE TESTING CHARGES HAS BEEN TAKEN ALREADY IN CLAUSE NO. 6.1, 6.1.1 .
6.1.4, Table 3(v) Chamfer length, H : Approx.)	-	0	THE TESTING CHARGES HAS BEEN TAKEN ALREADY IN CLAUSE NO. 6.1, 6.1.1 .
6.1.4.1 (wall thickness of sockets e2 min=0.9e )	-	0	THE TESTING CHARGES HAS BEEN TAKEN ALREADY IN CLAUSE NO. 6.1, 6.1.1 .
6.1.4.1 (e3min=0.75e)	-	0	THE TESTING CHARGES HAS BEEN TAKEN ALREADY IN CLAUSE NO. 6.1, 6.1.1 .
6.1.4, Table 4(b) Solvent Cement Joint sockets and spigot ends i) Mean inside dia. Of socket, dsm)	-	0	THE TESTING CHARGES HAS BEEN TAKEN ALREADY IN CLAUSE NO. 6.1, 6.1.1 .
6.1.4, Table 4(ii) Length of Solvent Cement socket, l2 )	-	0	THE TESTING CHARGES HAS BEEN TAKEN ALREADY IN CLAUSE NO. 6.1, 6.1.1 .
6.1.4, Table 4(iii) Length of spigot, l1, 100 mm Min.)	-	0	THE TESTING CHARGES HAS BEEN TAKEN ALREADY IN CLAUSE NO. 6.1, 6.1.1 .
6.1.4, Table 4(iv) Chamfer length, H, 7 mm Approx.)	-	0	THE TESTING CHARGES HAS BEEN TAKEN ALREADY IN CLAUSE NO. 6.1, 6.1.1 .
7(Physical characteristics )	-	0	-
7.1(Appearance:- )	-	300	-
7.2(Colour )	-	0	THE TESTING CHARGES HAS BEEN TAKEN ALREADY IN CLAUSE NO. 7.1.
7.3 IS 1223S ( Part 2)(Vicat Softening Temperature When determined according to IS 1223S ( Part 2), shall not be lessthan 79°C.)	-	1100	-
7.4 IS 1223S ( Part 5)(Longitudinal Reversion: When tested according to the methodprescribed in IS 1223S ( Part 5), shall not exceed ± 5 percent. The pipe shall not exhibit any blisters, bubbles or crackson completion of the test.)	-	1000	-
8(MECHANICAL CHARACTERISTICS)	-	0	-
8.1 Annex B(Resistance to External Blows at 0ºC: When tested according to the method prescribed in Annex B, the pipes hall have a true impact rate of not more than I0 percent.)	-	1400	-
8.2 Annex C Table 5(Ring Stiffness: When tested according to the method described in Annex C,the ring stiffness of the pipe shall be as stated in Table 5)	-	1400	-
8.3 IS 12235 ( Part 8/ Sec 1 ) Table 6(Resistance to internal Hydrostatic Pressure(Type Test) a) Acceptance Test:(1h at 27 0 C) )	-	850	-
8.3 IS 12235 ( Part 8/ Sec 1 ) Table 6(b) Type Test:(1000h at 60 0 C) )	-	11000	-
9 9.1, IS 5382(JOINTS:- a) Elastomeric Sealing Rings)	-	850	-
9.2 IS 14182(b) Solvent cement)	-	850	-
10(Performance requirements)	-	0	-
10.1.1 Annex D(Internal hydrostatic pressure test for elastomeric sealing ring joints)	-	1000	-
10.1.2 Annex E(Internal negative hydrostatic pressure test (internal vacuum) for elastomeric sealing ring joints)	-	0	THE TESTING CHARGES HAS TAKEN ALREADY IN CLAUSE NO. 10.1.1
10.2.1(Internal hydrostatic pressure test for solvent cemented Joints)	-	1000	-
10.2.2(Internal negative hydrostatic pressure test (internal vacuum)for solvent cemented joints)	-	0	CHARGES HAS ALREADY TAKEN IN CLAUSE NO. 10.2.2.
'7.5 (amdt.7)(Effect on Water (Type test))	-	3000	-
15.4 (b)(Cold impact)	-	1100	-
9.1(PIPE ENDS)	-	250	-

31 Dec, 2026

-
-

IS 9271 (2004)

Unplasticized polyvinyl chloride (UPVC) single wall corrugated pipes for drainage - Specification (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

31 Dec, 2026

-
-

IS 15450 (2004)

Polyethylene/aluminium/polyethylene composite pressure pipes for hot and cold water supplies - Specification

24900.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8, Table-2(Dimension)	-	250.00	-
10.1(Density )	-	500.00	-
10.6(Apparent tensile strength of pipe)	-	1600.00	1100.00 (Apparent tensile strength of pipe) + 500.00 (specimen charges)
10.7(minimum burst pressure)	-	1000.00	-
Clause 10.3 table 3(Carbon black content)	-	925.00	-

31 Dec, 2026

-
-

IS 15532 (2004)

Plastics crates for fruits and vegetables - Specification

14350 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.2(Material)	-	5900	cl. no. 3.2/3.2.2/ Color / Presence of UV stablizer / MFR / Density
3.3(Shape, Dimensions and Design)	-	500	-
3.4(Mass)	-	250	-
3.5(Appearance and Surface Finish)	-	300	-
3.6(Dimensional Stability)	-	700	-
3.7(Confluence Line Strength)	-	1100	-
3.8.1(Compressive Strength (Resistance to Applied Load))	-	1100	-
3.8.2(Resistance to Drop)	-	1100	-
3.9(Resistance to Environmental Stress Cracking)	-	1200	-
3.10.1(Suspension Test)	-	2200	-
3.10.2(Free-Fall Test)	-	0	The Test Charge has already been taken in the cl. no. 3.10.1

31 Dec, 2026

-
-

IS 11805 (2007)

Polyethylene pouches for packaging liquid milk - Specification - (Second Revision)

- View breakup
Rs.4988/-, Rs.2063/- optional for material (After 25% discount for BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

31 Dec, 2026

-
Included w.e.f. 29.06.2017.

IS 15801 (2008)

Polypropylene - Random copolymer pipes for hot and cold water supplies - Specification

114075 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 4( Designation)	-	300	-
Cl 7(Dimensions Of Pipes)	-	250	-
Cl 8(Visual Appearance)	-	300	-
Cl 9.1(Hydraulic Characteristics)	-	18400	-
Cl 9.2(Fusion Compatibility)	-	4800	-
Cl 9.3(Reversion Test )	-	1000	-
Cl 9.4 & Annex B(Impact Strength)	-	1400	-
Cl 9.5(Density)	-	500	-
Cl 9.6(Melt Flow Rate)	-	1100	-
Cl 9.7(Carbon Black Content & Dispersion)	-	1625	-
Cl 9.8(Thermal Stability By Hydrostatic Pressure Testing)	-	83825	-
Cl 9.9(Opacity)	-	575	-

31 Dec, 2026

-
EXCLUSION: Antioxidant test (Cl.4.1)

IS 10124 : Part 4 (2009)

Fabricated pvc - U fittings for potable water supplies - Specification: Part 4 specific requirements for caps (Second Revision)

- View breakup
Rs.1444/-, Rs.3075/- PVC Resin (After 25% discount for BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

31 Dec, 2026

-
upto 600mm dia

IS 10124 : Part 5 (2009)

Fabricated pvc - U fittings for potable water supplies - Specification: Part 5 specific requirements for equal tees (Second Revision)

- View breakup
Rs.1444/-, Rs.3075/- PVC Resin (After 25% discount for BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

31 Dec, 2026

-
upto 600mm dia

IS 10124 : Part 6 (2009)

Fabricated pvc - U fittings for potable water supplies - Specification: Part 6 specific requirements for flanged tail pieces with metallic flanges (Second Revision)

- View breakup
Rs.1819/-, Rs.3075/- PVC Resin (After 25% discount for BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

31 Dec, 2026

-
upto 600mm dia

IS 10124 : Part 7 (2009)

Fabricated pvc - U fittings for potable water supplies - Specification: Part 7 specific requirements for threaded adaptors (Second Revision)

- View breakup
Rs.1744/-, Rs.3075/- PVC Resin (After 25% discount for BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

31 Dec, 2026

-
upto 600mm dia

IS 10124 : Part 8 (2009)

Fabricated pvc - U fittings for potable water supplies - Specification: Part 8 specific requirements for 90 degree bends (Second Revision)

- View breakup
Rs.1444/-, Rs.3075/- PVC Resin (After 25% discount for BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

31 Dec, 2026

-
upto 600mm dia

IS 10124 : Part 9 (2009)

Fabricated pvc - U fittings for potable water supplies - Specification: Part 9 specific requirements for 60 degree bends (Second Revision)

- View breakup
Rs.1444/-, Rs.3075/- PVC Resin (After 25% discount for BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

31 Dec, 2026

-
upto 600mm dia

IS 10124 : Part 10 (2009)

Fabricated pvc - U fittings for potable water supplies - Specification: Part 10 specific requirements for 45 degree bends (Second Revision)

- View breakup
Rs.1444/-, Rs.3075/- PVC Resin (After 25% discount for BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

31 Dec, 2026

-
upto 600mm dia

IS 10124 : Part 11 (2009)

Fabricated pvc - U fittings for potable water supplies - Specification: Part 11 specific requirements for 40 degree bends (Second Revision)

- View breakup
Rs.1444/-, Rs.3075/- PVC Resin (After 25% discount for BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

31 Dec, 2026

-
upto 600mm dia

IS 10124 : Part 13 (2009)

Fabricated PVC-U Fittings for Potable Water Supplies - Specification Part 13 Specific Requirements for 11Â¼oBends PART 12 SPECIFIC REQUIREMENTS FOR 22 Â½o BENDS

- View breakup
Rs.1444/-, Rs.3075/- PVC Resin (After 25% discount for BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

31 Dec, 2026

-
upto 600mm dia

IS 10124 : Part 3 (2009)

Fabricated PVC-U Fittings for Potable Water Supplies - Specification Part 3 Specific Requirements for Straight Reducers

6025 View breakup
Rs.1444/-, Rs.3075/- PVC Resin (After 25% discount for BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

31 Dec, 2026

-
Up to 600 mm dia.

IS 15907 (2010)

Agro textiles – High density polyethylene (HDPE) woven beds for vermiculture – Specification

57450 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.3(Cord Beading - IS 15907)	-	250	-
5.1(MANUFACTURE- IS 15907)	-	1050	-
5.2.1(Lamination- IS 15907)	-	250	-
5.2.1(Thickness of coating film- method A of IS 13162 (Part 3))	-	250	-
5.2.2(coating thickness of the sandwich lamination- method A of IS 13162 (Part 3))	-	250	-
5.3.1(Construction- IS 15907)	-	4300	-
5.3.1(The width of the hem - IS 15907)	-	250	-
5.3.2(Finished width of pocket - IS 15907)	-	1150	-
5.4(Bonding- IS 15907)	-	1000	-
6- Table 1- SL.No (i)(Mass)	-	250	-
6- Table 1- SL.No (ii)(Breaking strength before UV exposure,warp - IS 1969 )	-	1350	-
6- Table 1- SL.No (ii)(Breaking strength before UV exposure,weft - IS 1969 )	-	1100	-
6- Table 1- SL.No (iii)(Elongation at break of fabric- IS 1969)	-	2450	-
6- Table 1- SL.No (iv)(Retention of breaking strength after UV exposure, - Annex B of IS 15907 and IS 1969)	-	2200	-
6- Table 1- SL.No (v)(Welded seam strength before UV exposure- IS 1969)	-	1350	-
6- Table 1- SL.No (vi)(Welded seam strength after UV exposure- Annex B of IS 15907 and IS 1969)	-	1100	-
6- Table 1- SL.No (vii)(Tear strength, Warp - Method A2 of IS 7016 (Part 3))	-	1350	-
6- Table 1- SL.No (vii)(Tear strength, Weft - Method A2 of IS 7016 (Part 3))	-	1100	-
6- Table 1- SL.No (viii)(Puncture strength - Annex C of IS 15907)	-	1100	-
6- Table 1- SL.No (ix)(Environmental stress cracking test - Annex D of IS 15907)	-	1450	-
6- Table 1- SL.No (xi)(Colour fastness to artificial light -IS 2454)	-	19000	-
6- Table 1- SL.No (xii)(Bursting pressure-IS 1966)	-	1350	-
6.1(Length -IS 15907)	-	250	-
6.1(Width - IS 15907)	-	250	-
6.1(Height - IS 15907)	-	250	-
6.2(Water Proofness,IS 7941)	-	1350	Before Ageing
6.2(Water Proofness, IS 7940)	-	1000	After Ageing and Ageing (70 °C/168 h) (168 x 25) - 4200/-
6- Table 1- SL.No (x)(Resistance to chemicals, change in the mass - Annex E of IS 15907)	-	2250	-

31 Dec, 2026

-
-

IS 16098 Part 2 (2013)

Structured-Wall Plastics Piping Systems for Non-Pressure Drainage and Sewerage Part 2 Pipes and Fittings with Non-Smooth External Surface, Type B

94200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.1.1 Table-10 (i)(Ring Stiffness)	-	1100	-
Table -1 Cl. No. 5.1, i)(Base Density)	-	500	-
Table -1 Cl. No. 5.1, ii)(Melt Flow Rate (MFR) at (190ºC, 5kg load))	-	1100	-
Table -1 Cl. No. 5.1, iii)(Thermal Stability (Oxidation Induction Test, OIT) at 200ºC)	-	2200	-
8.1.1 Table-10 (ii)(Impact Strength at (0±1 ºC))	-	1100	-
" 5.1 Table-2 ", i)(Resistance to Internal Pressure 165hrs)	-	4800	-
" 5.1 Table-2 ", ii)(Resistance to Internal Pressure 1000hrs)	-	11000	-
8.1.1, 8.1.2 Table-10 (iii)(Ring flexibility 30% of dem)	-	1100	-
6.3.1 & Table-5(Dim (min.) E4 (min) E5 (min.) Socket Length)	-	250	-
6.3.2(Length of Pipe)	-	250	-
8.1.1 Table-10 (iv)(Creep ratio)	-	26300	-
6.3.3(Out Side Diameter)	-	250	-
6.3.5.1.1(Ring Stiffness of Spigot + socket)	-	0	The testing charges has alredy been taken in cl. no. 8.1.1
"6.3.5.1.5 Table-5 "(Socket thickness Avg. (min.) Avg.)	-	0	The testing charges has alredy been taken in cl. no. 6.3.5.2
9 Table-12 (i)(Tightness of elastomeric ring seal Joint)	-	300	-
6.3.5.2(Wall Thickness(e4 min))	-	250	-
9 Table 12 (ii)(Water tightness)	-	1000	-
6.3.5.2("Construction Height of body wall(ec) Wall Thickness (emin) ")	-	0	The testing charges has alredy been taken in cl. no. 6.3.5.2
9 Table- 12 (iii)(Resistance to combined temperature cycling and external loading)	-	39000	-
7.1(Appearance)	-	300	-
7.1.1(Color of Finished Pipes)	-	300	-
7.2 Table-6 (i)(Resistance to Heating oven test at (110±2ºC for 30 minute))	-	1100	-

31 Dec, 2026

-
-

IS 14887 (2014)

Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sacks for packaging of 50 kg food grains – Specification (first revision)

24480 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.2(Tapes – Width and Thickness ( IS 6192/IS 11197))	-	450	Nil
3.2(Tapes – Linear Density (IS 6192/IS 11197))	-	500	Nil
3.2(Tapes – Tenacity (IS 6192/IS 11197))	-	250	Nil
3.2(Tapes – Elongation at point of rupture (IS 6192/IS 11197))	-	1100	Nil
3.2(Tapes – Heat Shrinkage (HDPE) (Cl. 3.2 and IS 6192))	-	1700	Nil
3.2(Tapes – Colour Fastness for pigmented tapes (IS 6192/IS 11197))	-	850	Nil
3.2(Tapes – Dimensional stability (PP) (IS 11197))	-	1400	Nil
3.2(Unlaminated Fabric Mass )	-	250	NIl
3.3.1(Bottom seam (IS 10789))	-	250	Nil
4.1 and 3.4(Mass of bale (Cl. 4.1), Capacity (Cl 3.4))	-	300	Nil
4.2 and Table 1 ii(Dimensions )	-	250	Nil
5.2 and Table 1 iii(Ends per dm )	-	250	Nil
5.2 and Table 1 iv(Picks per dm )	-	0	Charges all ready taken in End per dm test
4.2 and Table 1 v(Mass of sack )	-	300	Nil
4.2 and Table 1 vi(Average breaking strength of fabric )	-	1100	Nil
4.2 and Table 1 vi(Breaking strength of bottom seam )	-	1100	Nil
4.2 and Table 1 viii(Elongation at break of fabric )	-	1100	Nil
4.2 and Table 1 ix(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	12380	Test charges Rs. 2200/- plus UV Exposure charges Rs. 10180/- (25% discount is not applicable in exposure charges)
4.2 and Table 1 x(Ash content )	-	950	Nil

31 Dec, 2026

-
-

IS 16190 (2014)

Agro textiles - High density polyethylene (HDPE) laminated woven lay flat tube for irrigation purpose - Specification

121275.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4,4.1 IS 6192( MATERIALS HDPE Tapes)	-	4000.00	(Material Identification) 2000.00+ (Presence of UV-stabilizer) 2000.00
4,4.1 IS 6192( MATERIALS HDPE Tapes)	-	750.00	Test Charges for 250.00 (Width ) + 500.00 (Linear Density)
4.2 IS 6899(MATERIALS HDPE Fabric)	-	250.00	Ends/dm
4.2 IS 6899(MATERIALS HDPE Fabric)	-	250.00	Picks/dm
4.2 IS 6899(MATERIALS HDPE Fabric)	-	0	Test Charges is already taken in clause 4.2
5,5.1(MANUFACTURE Lamination )	-	2000.00	Presence of UV-stabiliser
5,5.1(MANUFACTURE Lamination )	-	2000.00	Material Identification
5,5.2(MANUFACTURE A 5 layer laminated fabric is produced using acombination of 2 layers of HDPE fabric and 3 layersof coating film. The minimum coating thickness shall be 35 µ. The layers of HDPE fabric used to manufacture lay flat tubes, shall be joined by sandwich lamination.The minimum thickness of the sandwich laminationshall be 40 µ. )	-	250.00	Coating Thickness
5,5.2(MANUFACTURE A 5 layer laminated fabric is produced using acombination of 2 layers of HDPE fabric and 3 layersof coating film. The minimum coating thickness shall be 35 µ. The layers of HDPE fabric used to manufacture lay flat tubes, shall be joined by sandwich lamination.The minimum thickness of the sandwich laminationshall be 40 µ. )	-	0	Test Charges is already taken in clause 5.5.2
5,5.3 Table 1.(MANUFACTURE The laminated HDPE woven fabric is to be formed in to lay flat tube of the required inside diameter using a heat sealing process keeping the minimum overlap as specified in Table 1.)	-	250.00	overlap distance
6. Table 2 i) IS 1964 (Mass)	-	250.00	-
6. Table 2 ii) a) IS 1969 (Part 1) ( Breaking strength before UV exposure : Wrap)	-	1350.00	1100.00 (breaking strength) + 250.00 (specimen charges)
6. Table 2 ii) b) IS 1969 (Part 1) ( Breaking strength before UV exposure : Weft)	-	1350.00	1100.00 (breaking strength & elongation at break) + 250.00 (specimen charges)
6. Table 2 iii) IS 1969 (Part 1) ( Elongation at break)	-	0	Test Charges is already taken in clause 6.0 (Breaking strength before UV exposure)
6. Table 2 iv) a) Annex B(Retention of breaking strength after UV exposure of 500 h : Wrap 85 percent of original actual value (fabric))	-	90350.00	1100.00 (Retention of breaking strength) + 250.00 (specimen charges) + 89,000.00 (UV exposure of 500 h)
6. Table 2 iv) b) Annex B(Retention of breaking strength after UV exposure of 500 h : weft 85 percent of original actual value (fabric))	-	1350.00	1100.00 (Retention of breaking strength) + 250.00 (specimen charges)
6. Table 2 v) IS 14714 (Abrasion resistance : Loss in breaking strength shall not be more than 15 percent)	-	1375.00	875.00 (Abrasion resistance) + 500.00 (specimen charges)
6. Table 2 vi) a) IS 14293 ( Trapezoid tear strength: Wrap)	-	1350.00	1100.00 (Trapezoid tear strength)+ 250.00 (specimen charges)
6. Table 2 vi) b) IS 14293 ( Trapezoid tear strength : Weft)	-	1350.00	1100.00 (Trapezoid tear strength)+ 250.00 (specimen charges)
6. Table 2 vii) Annex C (Puncture strength)	-	1350.00	1100.00 (Puncture strength)+ 250.00 (specimen charges)
6. Table 2 viii) Annex D ( Environmental stress cracking test : )	-	1200.00	-
6. Table 2 ix) a) IS 7016(Part 8) (Oven method) (Accelerated ageing test for 72 h at 70 ± 1°C: Loss in breaking strength shall not be more than 15 percent Wrap)	-	1800.00	Conditioning Charges
6. Table 2 ix) b) IS 7016(Part 8) (Oven method) (Accelerated ageing test for 72 h at 70 ± 1°C: Loss in breaking strength shall not be more than 1 5 percent Weft)	-	0	Test charges is already taken in clause 6 (Accelerated ageing test for 72 h at 70 ± 1°C: Loss in breaking strength shall not be more than 15 percent Wrap way)
6. Table 2 x) Annex E (Cold cracking resistance test at –5°C)	-	1100.00	-
6.1 Table 1(Internal Diameter : The inside diameter of the lay flat tube shall be as given in Table 1. The internal diameter of the lay flat tube shall be measured by a suitable conical plug gauge and shall conform to the tolerance specified in Table 1)	-	250.00	-
6.2(Workmanship)	-	300.00	-
6.3,6.3.1(Hydrostatic Burst Pressure Test)	-	1600.00	1100.00 (Hydrostatic Burst Pressure Test)+ 500.00 (specimen charges)
6.4 , 6.4.1(Proof Pressure Tes)	-	1600.00	1100.00 (Proof Pressure Test)+ 500.00 (specimen charges)
6.5( Length : Unless specified otherwise, the standard length shall be 30 m. A tolerance of +5 percent shall be permitted on the length prescribed for the lay flat tube by the purchaser. No negative tolerance shall be permitted)	-	250.00	-
6.6(Kink Test :)	-	1100.00	-
6.7 IS 1969 (Part 1)(Welded Seam Strength Before UV Exposure : When a sample of fabric with seam cut from the lay flat tube is tested for welded seam strength as per the method specified in IS 1969 (Part 1), welded seam strength before UV exposure shall be not less than the 80 percent of the original actual fabric strength)	-	1350.00	1100.00 (Welded Seam Strength After UV Exposure)+250.00 (specimen charges)
6.8 Annex B and IS 1969 (Part 1)(Welded Seam Strength After UV Exposure: When a sample of fabric with seam cut from the lay flat tube is tested for welded seam strength as per the method specified in Annex B and IS 1969 (Part 1), the loss in welded seam strength after UV exposure shall be not more than 15 percent)	-	1100.00	-
8(PACKING)	-	0	-

31 Dec, 2026

-
-

IS 15827 (2019)

Cladding films for greenhouse / polyhouse - Specifications (First Revision)

- View breakup
For Class ATest Charges: Rs.24,550/- (25% Discount to BIS)+ Sample Preparation Charges: Rs.2250/- + UV exposure test charges (190×100+175×1300) (1400 hrs): Rs.2,46,500/- For Class BTest Charges: Rs.24,550/- (25% Discount to BIS)+ Sample Preparation Charges: Rs.2250/- + UV exposure test charges (190×100+175×2350) (2450 hrs) : Rs.4,30,250/- For Class CTest Charges: Rs.24,550/- (25% Discount to BIS)+ Sample Preparation Charges: Rs.2250/- + UV exposure test charges (190×100+175×3970) (4070 hrs): Rs.7,13,750/- For Class DTest Charges: Rs.24,550/- (25% Discount to BIS)+ Sample Preparation Charges: Rs.2250/- + UV exposure test charges (190×100+175×4570) (4670 hrs): Rs.8,18,750/- For Class ETest Charges: Rs.24,550/- (25% Discount to BIS)+ Sample Preparation Charges: Rs.2250/- + UV exposure test charges (190×100+175×5730) (5830 hrs): Rs.10,21,750/- For Class FTest Charges: Rs.24,550/- (25% Discount to BIS)+ Sample Preparation Charges: Rs.2250/- + UV exposure test charges (190×100+175×7250) (7350 hrs): Rs.12,87,750/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

31 Dec, 2026

-
Revised 2019 Version Included w.e.f. 24.07.2019

First
Prev
1
2
3
4
Next
Last

Bureau of Indian Standards

The National Standards Body of India

CENTRAL INSTITUTE OF PETROCHEMICALS ENGINEERING AND TECHNOLOGY (CIPET):CSTS-BHOPAL

G SECTOR, GOVINDPURA INDUSTRIAL AREA, J. K. ROAD, BHOPAL, BHOPAL, Bhopal, Madhya Pradesh, 462023

7869955244 cipet.bhopal@gmail.com

Scope List

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found