BIS - LIMS (Laboratory Information Management System)

HT Product Services Private Limited, Noida

B-78 (Basement, First, Fourth and Fifth Floor) Sector-5, Noida, Noida, Gautam Buddha Nagar, Uttar Pradesh, 201301

9899994387 info@houseoftesting.com

Scope List

Reset

64 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

IS 16046 : Part 2 (2018)

Secondary Cells and Batteries Containing Alkaline or Other Non-Acid Electrolytes ” Safety Requirements for Portable Sealed Secondary Cells and for Batteries Made from Them for Use in Portable Applications Part 2 Lithium Systems ( Second Revision )

100000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Parameter Measurement Tolerances)	-	0	-
5(General Safety Considerations)	-	0	-
5.1(General)	-	0	-
5.2(Insulation and Wiring)	-	4000	-
5.3(Venting)	-	0	-
5.4(Temperature, Voltage and Current Management)	-	0	-
5.5(Terminal Contacts)	-	0	-
5.6(Assembly of Cells into batteries)	-	0	-
5.7(Quality Plan)	-	0	-
5.8(Battery Safety Components)	-	0	-
6(Type Test and Sample Size)	-	5000	-
7(Specific requirements and tests)	-	0	-
7.1(Charging procedure for test purposes)	-	0	-
7.2(Intended Use)	-	14000	-
7.3(Reasonably foreseeable misuse)	-	77000	-
8(Information for safety)	-	0	-
8.1(General)	-	0	-
8.2(Small Cell and battery safety information)	-	0	-
9(Marking)	-	0	-
9.1(Cell Marking)	-	0	-
9.2(Battery Marking)	-	0	-
9.3(Caution for ingestion of small cells and batteries)	-	0	-
9.4(Other information)	-	0	-
10(Packaging)	-	0	-
clause 7.3.1 of IS 16047: Part 3(Discharge performance at 20 °C (rated capacity))	-	15000	-

03 Dec, 2026

-
-

IS 10322 (Part 5/Sec 18) (2026)

Luminaires Part 5 Particular requirements Section 18 Luminaires for swimming pools and similar applications

20000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-18.4(General test requirements)	-	2000	-
Cl-18.6(Marking)	-	2000	-
Cl-18.6.2(Marking)	-	2000	-
Cl-18.7.2(Construction-mechanical strength)	-	2000	-
Cl-18.7.3(Construction-corrosion test)	-	2000	-
Cl-18.8(Creepage distances and clearances)	-	2000	-
Cl-18.10(Terminals)	-	2000	-
Cl-18.11(External and internal wiring)	-	2000	-
Cl-18.12(Protection against electric shock)	-	2000	-
Cl-18.13.2(Relevant tests)	-	2000	-
Cl-18.13.3(Endurance tests and thermal tests)	-	2000	-
Cl-18.14.2(moisture)	-	2000	-
Cl-18.14.3(Thermal shock test)	-	2000	-
Cl-18.15(Insulation resistance and electric strength)	-	2000	-
Cl-18.16(Resistance to heat, fire and tracking)	-	2000	-

03 Dec, 2026

-
-

IS 10322 (Part 5/Sec 8) (2026)

Luminaires Part 5: Particular requirements Section 8: Luminaires for emergency lighting (First Revision)

20000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-22.4(General test requirements)	-	2000	-
Cl-22.4(Self-contained portable emergency luminaires)	-	2000	-
Cl-22.6(Marking)	-	2000	-
Cl-22.7(Construction)	-	2000	-
Cl-22.7.4(mechanical strength)	-	2000	-
Cl-22.8(Creepage distances and clearances)	-	2000	-
Cl-22.9(Provision of earthing)	-	2000	-
Cl-22.10(Terminals)	-	2000	-
Cl-22.11(External and internal wiring)	-	2000	-
Cl-22.12(Protection against electric shock)	-	2000	-
Cl-22.13(Endurance test and thermal test)	-	2000	-
Cl-22.13.1(The endurance test)	-	2000	-
Cl-22.14(Resistance to dust and moisture)	-	2000	-
Cl-22.15(Insulation resistance and electric strength)	-	2000	-
Cl-22.16(Resistance to heat, fire and tracking)	-	2000	-
Cl-22.17(Photometric data)	-	2000	-
Cl-22.18(Changeover operation)	-	2000	-
Cl-22.19(High temperature operation)	-	2000	-
Cl-22.20(Battery chargers for self-contained emergency luminaires)	-	2000	-
Cl-22.21(Test devices for emergency operation)	-	2000	-

03 Dec, 2026

-
-

IS 10322 (Part 5/Sec 6) (2026)

Luminaires Part 5: Particular requirements Section 6: Handlamps (First Revision)

20000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-8.4(General test requirements)	-	2000	-
Cl-8.6(Marking)	-	2000	-
Cl-8.7(Construction)	-	2000	-
Cl-8.7.1(Handle of the handlamp)	-	2000	-
Cl-8.7.2(Lamp)	-	2000	-
Cl-8.7.4(Tungsten filament lamps)	-	2000	-
Cl-8.7.5(Flexible cable or cord)	-	2000	-
Cl-8.7.6(Mechanical strength)	-	2000	-
Cl-8.7.6.1(Translucent covers and protective covers)	-	2000	-
Cl-8.8(Creepage distances and clearances)	-	2000	-
Cl-8.10(Terminals)	-	2000	-
Cl-8.10.1(Terminals for supply connection)	-	2000	-
Cl-8.11(External and internal wiring)	-	2000	-
Cl-8.11.1(Rewirable handlamps)	-	2000	-
Cl-8.11.1(Non-rewirable handlamps)	-	2000	-
Cl-8.12(Protection against electric shock)	-	2000	-
Cl-8.13(Endurance tests and thermal tests)	-	2000	-
Cl-8.13.1(Endurance test)	-	2000	-
Cl-8.13.2(Thermal tests)	-	2000	-
Cl-8.13.3(Limiting temperature)	-	2000	-
Cl-8.14(Resistance to dust and moisture)	-	2000	-
Cl-8.15(Insulation resistance and electric strength)	-	2000	-
Cl-8.16(Resistance to heat, fire and tracking)	-	2000	-
Cl-8.4(General test requirements)	-	2000	-
Cl-8.6(Marking)	-	2000	-
Cl-8.7(Construction)	-	2000	-
Cl-8.7.1(Handle of the handlamp)	-	2000	-
Cl-8.7.2(Lamp)	-	2000	-
Cl-8.7.4(Tungsten filament lamps)	-	2000	-
Cl-8.7.5(Flexible cable or cord)	-	2000	-
Cl-8.7.6(Mechanical strength)	-	2000	-
Cl-8.7.6.1(Translucent covers and protective covers)	-	2000	-
Cl-8.8(Creepage distances and clearances)	-	2000	-
Cl-8.10(Terminals)	-	2000	-
Cl-8.10.1(Terminals for supply connection)	-	2000	-
Cl-8.11(External and internal wiring)	-	2000	-
Cl-8.11.1(Rewirable handlamps)	-	2000	-
Cl-8.11.1(Non-rewirable handlamps)	-	2000	-
Cl-8.12(Protection against electric shock)	-	2000	-
Cl-8.13(Endurance tests and thermal tests)	-	2000	-
Cl-8.13.1(Endurance test)	-	2000	-
Cl-8.13.2(Thermal tests)	-	2000	-
Cl-8.13.3(Limiting temperature)	-	2000	-
Cl-8.14(Resistance to dust and moisture)	-	2000	-
Cl-8.15(Insulation resistance and electric strength)	-	2000	-
Cl-8.16(Resistance to heat, fire and tracking)	-	2000	-

03 Dec, 2026

-
included w.e.f 02.07.2026 exclusions: Cl-8.7 (Construction) CL 7.24 (Photo biological hazards) Cl-8.7 (Construction) CL 7.34(Electromagnetic fields (EMF)

IS 10322 (Part 5/Sec 4) (2026)

Luminaires Part 5: Particular requirements Section 4: Portable general purpose luminaires (First Revision)

20000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4.4(General test requirements)	-	2000	-
Cl-4.6.1(Marking)	-	2000	-
Cl-4.6.2(Marking)	-	2000	-
Cl-4.7(Construction)	-	2000	-
Cl-4.7.1(Portable luminaires)	-	2000	-
Cl-4.7.2(Wiring)	-	2000	-
Cl-4.7.4(Candlestick luminaires)	-	2000	-
Cl-4.7.5(E5 lampholders)	-	2000	-
Cl-4.8(Creepage distances and clearances)	-	2000	-
Cl-4.9(Provision for earthing)	-	2000	-
Cl-4.10(Terminals)	-	2000	-
Cl-4.11(External and internal wiring)	-	2000	-
Cl-4.11.1(Cord anchorage)	-	2000	-
Cl-4.11.3(Flexible cable or cord)	-	2000	-
Cl-4.114(Non-detachable flexible cables or cords)	-	2000	-
Cl-4.12(Protection against electric shock)	-	2000	-
Cl-4.13(Endurance tests and thermal tests)	-	2000	-
Cl-4.14(Resistance to dust and moisture)	-	2000	-
Cl-4.15(Insulation resistance and electric strength)	-	2000	-
Cl-4.16(Resistance to heat, fire and tracking)	-	2000	-
Cl-4.4(General test requirements)	-	2000	-
Cl-4.6.1(Marking)	-	2000	-
Cl-4.6.2(Marking)	-	2000	-
Cl-4.7(Construction)	-	2000	-
Cl-4.7.1(Portable luminaires)	-	2000	-
Cl-4.7.2(Wiring)	-	2000	-
Cl-4.7.4(Candlestick luminaires)	-	2000	-
Cl-4.7.5(E5 lampholders)	-	2000	-
Cl-4.8(Creepage distances and clearances)	-	2000	-
Cl-4.9(Provision for earthing)	-	2000	-
Cl-4.10(Terminals)	-	2000	-
Cl-4.11(External and internal wiring)	-	2000	-
Cl-4.11.1(Cord anchorage)	-	2000	-
Cl-4.11.3(Flexible cable or cord)	-	2000	-
Cl-4.114(Non-detachable flexible cables or cords)	-	2000	-
Cl-4.12(Protection against electric shock)	-	2000	-
Cl-4.13(Endurance tests and thermal tests)	-	2000	-
Cl-4.14(Resistance to dust and moisture)	-	2000	-
Cl-4.15(Insulation resistance and electric strength)	-	2000	-
Cl-4.16(Resistance to heat, fire and tracking)	-	2000	-

03 Dec, 2026

-
included w.e.f 02.07.2026 exclusions: Cl-4.7 (Construction) CL 7.24 (Photo biological hazards) Cl-4.7 (Construction) CL 7.34 (Electromagnetic fields (EMF)

IS 10322 (Part 5/Sec 2) (2026)

Luminaires Part 5: Particular requirements Section 2: Recessed luminaires and recessed air-handling luminaires (Second Revision)

20000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-2.4(General test requirements)	-	2000	-
Cl-2.6.2(Marking)	-	2000	-
Cl-2.6.3(Marking)	-	2000	-
Cl-2.6.4(Marking)	-	2000	-
Cl-2.7(Construction)	-	2000	-
Cl-2.8(Creepage distances and clearances)	-	2000	-
Cl-2.9(Provision for earthing)	-	2000	-
Cl-2.10(Terminals)	-	2000	-
Cl-2.11(External and internal wiring)	-	2000	-
Cl-2.12(Protection against electric shock)	-	2000	-
Cl-2.13(Endurance tests and thermal tests)	-	2000	-
Cl-2.14(Resistance to dust and moisture)	-	2000	-
Cl-2.15(Insulation resistance and electric strength)	-	2000	-
Cl-2.16(Resistance to heat, fire and tracking)	-	2000	-

03 Dec, 2026

-
Included w.e.f-23.06.2026. "Cl-2.7 (Construction) CL 7.24 (Photobiological hazards) CL 7.34(Electromagnetic fields (EMF))"

IS 10322 (Part 5/Sec 1) (2026)

Luminaires Part 5: Particular requirements Section 1: Fixed general purpose luminaires (Second Revision)

20000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-1.4(General test requirements)	-	2000	-
Cl-1.6(Marking)	-	2000	-
Cl-1.7(Construction)	-	2000	-
Cl-1.8(Creepage distances and clearances)	-	2000	-
Cl-1.9(Provision for earthing)	-	2000	-
Cl-1.10(Terminals)	-	2000	-
Cl-1.11(External and internal wiring)	-	2000	-
Cl-1.12(Protection against electric shock)	-	2000	-
Cl-1.12(Protection against electric shock)	-	2000	-
Cl-1.13(Endurance tests and thermal tests)	-	2000	-
Cl-1.14(Resistance to dust, solid objects and moistur)	-	2000	-
Cl-1.15(" Insulation resistance and electric strength, touch current and protective conductor current")	-	2000	-
Cl-1.16(Resistance to heat, fire and tracking)	-	2000	-
Cl-1.4(General test requirements)	-	2000	-
Cl-1.6(Marking)	-	2000	-
Cl-1.7(Construction)	-	2000	-
Cl-1.8(Creepage distances and clearances)	-	2000	-
Cl-1.9(Provision for earthing)	-	2000	-
Cl-1.10(Terminals)	-	2000	-
Cl-1.11(External and internal wiring)	-	2000	-
Cl-1.12(Protection against electric shock)	-	2000	-
Cl-1.12(Protection against electric shock)	-	2000	-
Cl-1.13(Endurance tests and thermal tests)	-	2000	-
Cl-1.14(Resistance to dust, solid objects and moistur)	-	2000	-
Cl-1.15(" Insulation resistance and electric strength, touch current and protective conductor current")	-	2000	-
Cl-1.16(Resistance to heat, fire and tracking)	-	2000	-

03 Dec, 2026

-
Included w.e.f-23.06.2026 "Cl-1.7 (Construction) CL 7.24 (Photobiological hazards) CL 7.34 (Electromagnetic fields (EMF))"

IS 16102 (Part 1) (2026)

Self-Ballasted LED Lamps for General Lighting Services Part 1 Safety Requirements (First Revision)

20000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4(General Requirenents and General Test Requirements)	-	2000	-
Cl-6.1(Cap Interchangeability)	-	2000	-
Cl-6.2(Bending Moment and Mass Imparted by the Lamp at the Lamp Holder)	-	2000	-
Cl-7(Protection Against Accidental Contact with live parts)	-	2000	-
Cl-8.1(Insulation resistance and electric strength)	-	2000	-
Cl-8.2(Insulation Resistance lamp)	-	2000	-
Cl-8.3(Electric Strength)	-	2000	-
Cl-9.1(Mechanical Strength Requirements)	-	2000	-
Cl-9.2.1(Torsion Resistance of Unused Lamps)	-	2000	-
Cl-9.2.2(Torsion Resistance of Lamps after a Defined Time of Usage)	-	2000	-
Cl-9.2.3(Externally Applied Axial Pull and Bending Moment)	-	2000	-
Cl-9.3(Axial Strength of Edison Caps)	-	2000	-
Cl-10(Cap Temperature Rise)	-	2000	-
Cl-11(Resistance to Heat)	-	2000	-
Cl-12(Resistance to Flame and Ignition)	-	2000	-
Cl-13.1(Fault Conditions- General Requirements)	-	2000	-
Cl-14(Creepage Distance and Clearances)	-	2000	-
Cl-15(Abnormal Operation)	-	2000	-
Cl-16(Test Conditions for Dimmable Lamps)	-	2000	-
Cl-18(Ingress Protection Requirements)	-	2000	-
Cl-19(Information for luminaire design)	-	2000	-
Cl-20.3(Accidentally Broken Lamps)	-	2000	-
Cl-5(Marking)	-	2000	-

03 Dec, 2026

-
Included w.e.f-23.06.2026 "Cl-17.1 (UV Radiation) Cl-17.2 (Blue Light Hazard)"

IS/IEC 62368 : Part 1 (2023)

Audio Video Information and Communication Technology Equipment - Part 1: Safety Requirements (Second Revision)

60000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4.1(General- materials, components)	-	5000	-
Cl-4.2(Energy source classifications)	-	5000	-
Cl-4.3(Protection against energy sources)	-	5000	-
Cl-4.4(Safeguards)	-	5000	-
Cl-4.5(Explosion)	-	5000	-
Cl-4.6(Fixing of conductors and conductive parts)	-	5000	-
Cl-4.7(Equipment for direct insertion into mains socket-outlets)	-	5000	-
Cl-4.8(Equipment containing coin or button cell batteries)	-	5000	-
Cl-4.9(Likelihood of fire or shock due to entry of conductive objects)	-	5000	-
Cl-4.10(Components requirements)	-	5000	-
Cl-5.1(General- Electrically-caused injury)	-	5000	-
Cl-5.2(Classification and limits of electrical energy sources)	-	5000	-
Cl-5.3(Protection against electrical energy sources)	-	5000	-
Cl-5.4(Insulation materials and requirements)	-	5000	-
Cl-5.5(Components as safeguards)	-	5000	-
Cl-5.6(Protective conductor)	-	5000	-
Cl-5.7(Prospective touch voltage, touch current and protective conductor current)	-	5000	-
Cl-5.8(Backfeed safeguard in battery backed up supplies)	-	5000	-
Cl-6.1(General- Electrically-caused fire)	-	5000	-
Cl-6.2(Classification of power sources and potential ignition sources)	-	5000	-
Cl-6.3(Safeguards against fire under normal operating conditions and abnormal operating conditions)	-	5000	-
Cl-6.4(Safeguards against fire under single fault conditions)	-	5000	-
Cl-6.5(Internal and external wiring)	-	5000	-
Cl-7.1(General- Injury caused by hazardous substances)	-	5000	-
Cl-7.2(Reduction of exposure to hazardous substances)	-	5000	-
Cl-7.3(Ozone exposure)	-	5000	-
Cl-7.4(Use of personal safeguards or personal protective equipment (PPE)	-	5000	-
Cl-7.5(Use of instructional safeguards and instructions)	-	5000	-
Cl-8.1(General- Mechanically-caused injury)	-	5000	-
Cl-8.2(Mechanical energy source classifications)	-	5000	-
Cl-8.3(Safeguards against mechanical energy sources)	-	5000	-
Cl-8.4(Safeguards against parts with sharp edges and corners)	-	5000	-
Cl-8.5(Safeguards against moving parts)	-	5000	-
Cl-8.6(Stability of equipment)	-	5000	-
Cl-8.7(Equipment mounted to a wall, ceiling or other structure)	-	5000	-
Cl-8.8(Handle strength)	-	5000	-
Cl-8.9(Wheels or casters attachment requirements)	-	5000	-
Cl-8.10(Carts, stands, and similar carriers)	-	5000	-
Cl-8.11(Mounting means for slide-rail mounted equipment (SRME))	-	5000	-
Cl-9.1(General-Thermal burn injury)	-	5000	-
Cl-9.2(Thermal energy source classifications)	-	5000	-
Cl-9.3(Touch temperature limits)	-	5000	-
Cl-9.4(Safeguards against thermal energy sources)	-	5000	-
Cl-9.5(Requirements for safeguards)	-	5000	-
Cl-9.6(Requirements for wireless power transmitters)	-	5000	-
Annex A(Examples of equipment within the scope of this document)	-	5000	-
Annex B(General- Normal operating condition tests, abnormal operating condition tests and single fault condition tests)	-	5000	-
Annex B-2(Normal operating conditions)	-	5000	-
Annex B-3(Simulated abnormal operating conditions)	-	5000	-
Annex B-4(Simulated single fault conditions)	-	5000	-
Annex D-1(Impulse test generators)	-	5000	-
Annex E-1(Electrical energy source classification for audio signals)	-	5000	-
Annex E-2(Audio signals used during test)	-	5000	-
Annex E-3(Operating conditions of equipment containing an audio amplifier)	-	5000	-
Annex F-1(General-Equipment markings, instructions, and instructional safeguards)	-	5000	-
Annex F-2(Letter symbols and graphical symbols)	-	5000	-
Annex F-3(Equipment markings)	-	5000	-
Annex F-4(Instructions)	-	5000	-
Annex F-5(Instructional safeguards)	-	5000	-
Annex G-16(IC that includes a capacitor discharge function (ICX))	-	5000	-
Annex H-1(General- Criteria for telephone ringing signals)	-	5000	-
Annex H-2(Method A)	-	5000	-
Annex H-3(Method B)	-	5000	-
Annex I(Overvoltage categories (see IEC 60364-4-44))	-	5000	-
Annex L-1(General requirements)	-	5000	-
Annex L-2(Permanently connected equipment)	-	5000	-
Annex L-3()	-	5000	-
Annex L-4(Single-phase equipment)	-	5000	-
Annex L-5(Three-phase equipment)	-	5000	-
Annex L-6(Switches as disconnect devices)	-	5000	-
Annex L-7(Plugs as disconnect devices)	-	5000	-
Annex L-8(Multiple power sources)	-	5000	-
Annex L-9(Compliance criteria)	-	5000	-
Annex M-1(General requirements)	-	5000	-
Annex M-2(Safety of batteries and their cells)	-	5000	-
Annex M-3(Protection circuits for batteries provided within the equipment)	-	5000	-
Annex M-4(Additional safeguards for equipment containing a secondary lithium battery)	-	5000	-
Annex M-5(Risk of burn due to short-circuit during carrying)	-	5000	-
Annex M-6(Safeguards against short-circuits)	-	5000	-
Annex M-7(Risk of explosion from lead acid and NiCd batteries)	-	5000	-
Annex M-8("Protection against internal ignition from external spark sources of rechargeable batteries with aqueous electrolyte")	-	5000	-
Annex M-9(Preventing electrolyte spillage)	-	5000	-
Annex M-10(Instructions to prevent reasonably foreseeable misuse)	-	5000	-
Annex N(Electrochemical potentials (V))	-	5000	-
Annex O(Measurement of creepage distances and clearances)	-	5000	-
Annex P-1(General-Safeguards against conductive objects)	-	5000	-
Annex P-2(Safeguards against entry or consequences of entry of a foreign object)	-	5000	-
Annex P-3(Safeguards against spillage of internal liquids)	-	5000	-
Annex P-4(Metallized coatings and adhesives securing parts)	-	5000	-
Annex Q-1(Limited power source)	-	5000	-
Annex Q-2(Test for external circuits – paired conductor cable)	-	5000	-
Annex R(Limited short-circuit test)	-	5000	-
Annex S-1(Flammability test for fire enclosure and fire barrier materials of equipment where the steady state power does not exceed 4 000 W)	-	5000	-
Annex S-2(Flammability test for fire enclosure and fire barrier integrity)	-	5000	-
Annex S-3(Flammability tests for the bottom of a fire enclosure)	-	5000	-
Annex S-4(Flammability classification of materials)	-	5000	-
Annex S-5(Flammability test for fire enclosure materials of equipment with a steady state power exceeding 4 000 W)	-	5000	-
Annex S-6(Grille covering material, cloth, and reticulated foam)	-	5000	-
Annex T-1(General-Mechanical strength tests)	-	5000	-
Annex T-2(Steady force test, 10 N)	-	5000	-
Annex T-3(Steady force test, 30 N)	-	5000	-
Annex T-4(Steady force test, 100 N)	-	5000	-
Annex T-5(Steady force test, 250 N)	-	5000	-
Annex T-6(Enclosure impact test)	-	5000	-
Annex T-7(Drop test)	-	5000	-
Annex T-8(Stress relief test)	-	5000	-
Annex T-9(Glass impact test)	-	5000	-
Annex T-10(Glass fragmentation test)	-	5000	-
Annex T-11(Test for telescoping or rod antennas)	-	5000	-
Annex V-1(Accessible parts of equipment)	-	5000	-
Annex V-2(Accessible part criterion)	-	5000	-
Annex W(Comparison of terms introduced in this document)	-	5000	-
Annex X("Alternative method for determining clearances for insulation in circuits connected to an AC mains not exceeding 420 V peak (300 V RMS)")	-	5000	-
Annex Y-1(General- Construction requirements for outdoor enclosures)	-	5000	-
Annex Y-5(Protection of equipment within an outdoor enclosure)	-	5000	-
Annex Y-6(Mechanical strength of enclosures)	-	5000	-
Cl-4.1(General- materials, components)	-	-	-
Cl-4.2(Energy source classifications)	-	-	-
Cl-4.3(Protection against energy sources)	-	-	-
Cl-4.4(Safeguards)	-	-	-
Cl-4.5(Explosion)	-	-	-
Cl-4.6(Fixing of conductors and conductive parts)	-	-	-
Cl-4.7(Equipment for direct insertion into mains socket-outlets)	-	-	-
Cl-4.8(Equipment containing coin or button cell batteries)	-	-	-
Cl-4.9(Likelihood of fire or shock due to entry of conductive objects)	-	-	-
Cl-4.10(Components requirements)	-	-	-
Cl-5.1(General- Electrically-caused injury)	-	-	-
Cl-5.2(Classification and limits of electrical energy sources)	-	-	-
Cl-5.3(Protection against electrical energy sources)	-	-	-
Cl-5.4(Insulation materials and requirements)	-	-	-
Cl-5.5(Components as safeguards)	-	-	-
Cl-5.6(Protective conductor)	-	-	-
Cl-5.7(Prospective touch voltage, touch current and protective conductor current)	-	-	-
Cl-5.8(Backfeed safeguard in battery backed up supplies)	-	-	-
Cl-6.1(General- Electrically-caused fire)	-	-	-
Cl-6.2(Classification of power sources and potential ignition sources)	-	-	-
Cl-6.3(Safeguards against fire under normal operating conditions and abnormal operating conditions)	-	-	-
Cl-6.4(Safeguards against fire under single fault conditions)	-	-	-
Cl-6.5(Internal and external wiring)	-	-	-
Cl-7.1(General- Injury caused by hazardous substances)	-	-	-
Cl-7.2(Reduction of exposure to hazardous substances)	-	-	-
Cl-7.3(Ozone exposure)	-	-	-
Cl-7.4(Use of personal safeguards or personal protective equipment (PPE)	-	-	-
Cl-7.5(Use of instructional safeguards and instructions)	-	-	-
Cl-8.1(General- Mechanically-caused injury)	-	-	-
Cl-8.2(Mechanical energy source classifications)	-	-	-
Cl-8.3(Safeguards against mechanical energy sources)	-	-	-
Cl-8.4(Safeguards against parts with sharp edges and corners)	-	-	-
Cl-8.5(Safeguards against moving parts)	-	-	-
Cl-8.6(Stability of equipment)	-	-	-
Cl-8.7(Equipment mounted to a wall, ceiling or other structure)	-	-	-
Cl-8.8(Handle strength)	-	-	-
Cl-8.9(Wheels or casters attachment requirements)	-	-	-
Cl-8.10(Carts, stands, and similar carriers)	-	-	-
Cl-8.11(Mounting means for slide-rail mounted equipment (SRME))	-	-	-
Cl-9.1(General-Thermal burn injury)	-	-	-
Cl-9.2(Thermal energy source classifications)	-	-	-
Cl-9.3(Touch temperature limits)	-	-	-
Cl-9.4(Safeguards against thermal energy sources)	-	-	-
Cl-9.5(Requirements for safeguards)	-	-	-
Cl-9.6(Requirements for wireless power transmitters)	-	-	-
Annex A(Examples of equipment within the scope of this document)	-	-	-
Annex B(General- Normal operating condition tests, abnormal operating condition tests and single fault condition tests)	-	-	-
Annex B-2(Normal operating conditions)	-	-	-
Annex B-3(Simulated abnormal operating conditions)	-	-	-
Annex B-4(Simulated single fault conditions)	-	-	-
Annex D-1(Impulse test generators)	-	-	-
Annex E-1(Electrical energy source classification for audio signals)	-	-	-
Annex E-2(Audio signals used during test)	-	-	-
Annex E-3(Operating conditions of equipment containing an audio amplifier)	-	-	-
Annex F-1(General-Equipment markings, instructions, and instructional safeguards)	-	-	-
Annex F-2(Letter symbols and graphical symbols)	-	-	-
Annex F-3(Equipment markings)	-	-	-
Annex F-4(Instructions)	-	-	-
Annex F-5(Instructional safeguards)	-	-	-
Annex G-16(IC that includes a capacitor discharge function (ICX))	-	-	-
Annex H-1(General- Criteria for telephone ringing signals)	-	-	-
Annex H-2(Method A)	-	-	-
Annex H-3(Method B)	-	-	-
Annex I(Overvoltage categories (see IEC 60364-4-44))	-	-	-
Annex L-1(General requirements)	-	-	-
Annex L-2(Permanently connected equipment)	-	-	-
Annex L-3()	-	-	-
Annex L-4(Single-phase equipment)	-	-	-
Annex L-5(Three-phase equipment)	-	-	-
Annex L-6(Switches as disconnect devices)	-	-	-
Annex L-7(Plugs as disconnect devices)	-	-	-
Annex L-8(Multiple power sources)	-	-	-
Annex L-9(Compliance criteria)	-	-	-
Annex M-1(General requirements)	-	-	-
Annex M-2(Safety of batteries and their cells)	-	-	-
Annex M-3(Protection circuits for batteries provided within the equipment)	-	-	-
Annex M-4(Additional safeguards for equipment containing a secondary lithium battery)	-	-	-
Annex M-5(Risk of burn due to short-circuit during carrying)	-	-	-
Annex M-6(Safeguards against short-circuits)	-	-	-
Annex M-7(Risk of explosion from lead acid and NiCd batteries)	-	-	-
Annex M-8("Protection against internal ignition from external spark sources of rechargeable batteries with aqueous electrolyte")	-	-	-
Annex M-9(Preventing electrolyte spillage)	-	-	-
Annex M-10(Instructions to prevent reasonably foreseeable misuse)	-	-	-
Annex N(Electrochemical potentials (V))	-	-	-
Annex O(Measurement of creepage distances and clearances)	-	-	-
Annex P-1(General-Safeguards against conductive objects)	-	-	-
Annex P-2(Safeguards against entry or consequences of entry of a foreign object)	-	-	-
Annex P-3(Safeguards against spillage of internal liquids)	-	-	-
Annex P-4(Metallized coatings and adhesives securing parts)	-	-	-
Annex Q-1(Limited power source)	-	-	-
Annex Q-2(Test for external circuits – paired conductor cable)	-	-	-
Annex R(Limited short-circuit test)	-	-	-
Annex S-1(Flammability test for fire enclosure and fire barrier materials of equipment where the steady state power does not exceed 4 000 W)	-	-	-
Annex S-2(Flammability test for fire enclosure and fire barrier integrity)	-	-	-
Annex S-3(Flammability tests for the bottom of a fire enclosure)	-	-	-
Annex S-4(Flammability classification of materials)	-	-	-
Annex S-5(Flammability test for fire enclosure materials of equipment with a steady state power exceeding 4 000 W)	-	-	-
Annex S-6(Grille covering material, cloth, and reticulated foam)	-	-	-
Annex T-1(General-Mechanical strength tests)	-	-	-
Annex T-2(Steady force test, 10 N)	-	-	-
Annex T-3(Steady force test, 30 N)	-	-	-
Annex T-4(Steady force test, 100 N)	-	-	-
Annex T-5(Steady force test, 250 N)	-	-	-
Annex T-6(Enclosure impact test)	-	-	-
Annex T-7(Drop test)	-	-	-
Annex T-8(Stress relief test)	-	-	-
Annex T-9(Glass impact test)	-	-	-
Annex T-10(Glass fragmentation test)	-	-	-
Annex T-11(Test for telescoping or rod antennas)	-	-	-
Annex V-1(Accessible parts of equipment)	-	-	-
Annex V-2(Accessible part criterion)	-	-	-
Annex W(Comparison of terms introduced in this document)	-	-	-
Annex X("Alternative method for determining clearances for insulation in circuits connected to an AC mains not exceeding 420 V peak (300 V RMS)")	-	-	-
Annex Y-1(General- Construction requirements for outdoor enclosures)	-	-	-
Annex Y-5(Protection of equipment within an outdoor enclosure)	-	-	-
Annex Y-6(Mechanical strength of enclosures)	-	-	-

03 Dec, 2026

-
Included w.e.f-23.06.2026 "Cl-4.10 (Components requirements) Cl-10.2 (Radiation energy source classifications) Cl-10.3 (Safeguards against laser radiation) Cl-10.4 (""Safeguards against optical radiation from lamps and lamp systems (including LED types)"") Cl-10.5 (Safeguards against X-radiation) Cl-10.6 (Safeguards against acoustic energy sources) Annex C-1 (Protection of materials in equipment from UV radiation) Annex C-2 (UV light conditioning test) Annex G-1 (Switches) Annex G-2 (Relays) Annex G-3 (Protective devices) Annex G-4 (Connectors) Annex G-5 (Wound components) Annex G-6 (Wire insulation) Annex G-7 (Mains power supply cords and interconnection cables) Annex G-8 (Varistors) Annex G-9 (Integrated circuit (IC) current limiters) Annex G-10 (Resistors) Annex G-11 (Capacitors and RC units) Annex G-12 (Optocouplers) Annex G-13 (Printed boards) Annex G-14 (Coatings on component terminals) Annex G-15 (Pressurized liquid filled components or LFC assemblies) Annex G-16 (IC that includes a capacitor discharge function (ICX)) Annex J-1 (General-Insulated winding wires for use without interleaved insulation) Annex J-2 (Type tests) Annex J-3 (Testing during manufacturing) Annex K-1 (General- Safety interlocks) Annex K-2 (Components of the safety interlock safeguard mechanism) Annex K-3 (Inadvertent change of operating mode) Annex K-4 (Interlock safeguard override) Annex K-5 (Fail-safe) Annex K-6 (Mechanically operated safety interlocks) Annex K-7 (Interlock circuit isolation) Annex U (""Mechanical strength of CRTs and protection against the effects of implosion"") Annex Y-2 (Resistance to UV radiation) Annex Y-3 (Resistance to corrosion) Annex Y-4 (Gaskets) Annex Y-5 (Protection of equipment within an outdoor enclosure) Cl-10.1 (General-Radiation) Annex D-2 (Antenna interface test generator) Annex D-3 (Electronic pulse generator)"

IS 302 : Part 1 (2024)

Household and Similar Electrical Appliances â Safety Part 1 General Requirements (Seventh Revision)

20000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(General conditions for the tests)	-	500	-
6(Classification- IS 302-1)	-	500	-
7(Marking and instructions)	-	500	-
8.1.5(Live parts of built-in appliances)	-	500	-
4(General requirement)	-	500	-
8.1.1(Protection against live parts in all positions)	-	500	-
8.1.2(Protection against live parts in openings)	-	500	-
8.1.3(Protection against live parts in visible glowing heating elements)	-	500	-
8.1.4(Protection against live parts against protective impedance)	-	500	-
9(Starting of motor operation test requirements and tests)	-	500	-
10.1(Power input)	-	500	-
10.2(Current input)	-	500	-
11.2(General)	-	500	-
11.4(Heating appliances)	-	500	-
11.5(Motor-operated appliances)	-	500	-
11.6(Combined appliances)	-	500	-
11.7(Duration corresponding)	-	500	-
11.8(Temperature rise)	-	500	-
13(Leakage current and electric strength at operating temperature)	-	500	-
13.2(Leakage current at operating temperature)	-	500	-
13.3(Electric Strength at operating temperature)	-	500	-
14(Transient Over Voltages)	-	500	-
15.0(Moisture resistance)	-	500	-
15.1(Ingress Protection test other than IPX0 (IP test))	-	500	-
15.2(Spillage Test)	-	500	-
15.3(Humidity Test)	-	500	-
16.0(General)	-	500	-
16.1(General)	-	500	-
16.2(Leakage Current (after Clause 15))	-	500	-
16.3(Electric Strength (after clause 15 and 16.2))	-	500	-
17(Over Load Protection of Transformers and associated circuits)	-	500	-
18(Endurance)	-	500	-
19(Abnormal Operation)	-	500	-
20.1(Stability & Mechanical Hazards, IS 302-1)	-	500	-
20.2(Stability & Mechanical Hazards, IS 302-1)	-	500	-
19.17(Abnormal Operation, IS 302-1)	-	500	-
21.2(Mechanical Strength, IS 302-1)	-	500	-
21.3(Mechanical Strength, IS 302-1)	-	500	-
22.5(Construction)	-	500	-
22.1(Construction, IS 302-1)	-	500	-
22.6(Construction, IS 302-1)	-	500	-
22.11(Construction, IS 302-1)	-	500	-
22.32(Construction, IS 302-1)	-	500	-
22.42(Construction)	-	500	-
23.1(Internal Wiring, IS 302-1)	-	500	-
23.3(Internal Wiring, IS 302-1)	-	500	-
24(Components)	-	500	-
25.6(Supply connection and external flexible cords, IS 302-1)	-	500	-
25.7(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
26(Terminals for external conductors)	-	500	-
26.5(Terminals for external conductors)	-	500	-
27.1(Provision for Earthing, IS 302-1)	-	500	-
27.5(Provision for Earthing, IS 302-1)	-	500	-
28(Screw test and connections)	-	500	-
28.1(Screws and connections)	-	500	-
29(clearance, creepage distances and solid insulation)	-	500	-
30.1(Ball pressure test)	-	500	-
30.2(Glow Wire Test)	-	500	-
30.2(Needle Flame Test)	-	500	-
31(Resistance to Rusting)	-	500	-
A.2(Earth continuity test)	-	500	-
22.2(Construction, IS 302-1)	-	500	-
22.3(Construction, IS 302-1)	-	500	-
B.22.4(Construction, IS 302-1)	-	500	-
B.22.5(Construction, IS 302-1)	-	500	-
Annex C(Ageing test on motors)	-	500	-
12(Charging of metal-ion batteries)	-	500	-
18(Endurance)	-	500	-
16(Leakage current and electric strength)	-	500	-
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
21.1(Mechanical Strength, IS 302-1)	-	500	-
11.3(Heating)	-	500	-
11.1(General)	-	500	-
17(Overload protection of transformers and associated circuits)	-	500	-
15.2(Moisture resistance)	-	500	-

03 Dec, 2026

-
-

IS 302 : Part 1 (2008)

Safety of household and similar electrical appliances: Part 1 general requirements (Sixth Revision)

20000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking and instructions)	-	500	-
8.1.1(Protection against live parts in all positions)	-	500	-
8.1.2(Protection against live parts in openings)	-	500	-
8.1.3(Protection against live parts in visible glowing heating elements)	-	500	-
8.1.4(Protection against live parts against protective impedance)	-	500	-
9(Starting of motor operation test requirements and tests)	-	500	-
10.1(Power input)	-	5000	-
10.2(Current input)	-	5000	-
11.1(General)	-	1000	-
11.2(General)	-	1000	-
11.3(Heating)	-	1000	-
13.1(General)	-	1000	-
13.2(Leakage current at operating temperature)	-	500	-
13.3(Electric Strength at operating temperature)	-	500	-
14(Transient Over Voltages)	-	500	-
15.0(General)	-	500	-
15.1(Ingress Protection test other than IPX0 (IP test))	-	500	-
15.2(Spillage Test)	-	500	-
15.3(Humidity Test)	-	2000	-
16.0(General)	-	500	-
16.1(General)	-	500	-
16.2(Leakage Current (after Clause 15))	-	500	-
16.3(Electric Strength (after clause 15 and 16.2))	-	500	-
17(Over Load Protection of Transformers and associated circuits)	-	500	-
18(Endurance Test requirements and tests)	-	500	-
19(Abnormal Operation)	-	500	-
20(Stability test)	-	500	-
21(Mechanical Strength Test)	-	500	-
22(Construction verification related test)	-	500	-
23(General)	-	500	-
24(Components)	-	500	-
25(Supply connection and external flexible cords)	-	500	-
26(Terminals for external conductors)	-	500	-
27(Provision for earthing)	-	500	-
28(Screw test and connections)	-	500	-
29(clearance, creepage distances and solid insulation)	-	500	-
30.1(Ball pressure test)	-	500	-
30.2(Glow Wire Test)	-	500	-
30.2(Needle Flame Test)	-	500	-
31(Resistance to Rusting)	-	500	-
4(General requirement)	-	500	-
16(Leakage current and electric strength)	-	500	-
17(Overload protection of transformers and associated circuits)	-	500	-
18(Endurance)	-	500	-
8.1.5(Live parts of built-in appliances)	-	500	-
11.4(Heating appliances)	-	500	-
11.5(Motor-operated appliances)	-	500	-
11.6(Combined appliances)	-	500	-
11.7(Duration corresponding)	-	500	-
11.8(Temperature rise)	-	500	-
4(General Requirement)	-	500	-
5(General conditions for tests)	-	500	-
6(Classification- IS 302-1)	-	500	-

03 Dec, 2026

-
-

IS 16103 : Part 1 (2025)

LED Modules for General Lighting Part 1 Safety Specifications (First Revision)

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-6(Marking)	-	2000	-
Cl-7.1(Integral terminals)	-	2000	-
Cl-7.2(Terminals other than integral terminals)	-	2000	-
Cl-8(Earthing)	-	2000	-
Cl-9(Protection against accidental contact with live parts)	-	2000	-
Cl-10(Moisture resistance and insulation)	-	5000	-
Cl-11(Electric strength)	-	2000	-
Cl-12.1(Fault conditions- General)	-	2000	-
Cl-12.2(Overpower condition)	-	2000	-
Cl-13(Conformity testing during manufacture)	-	2000	-
Cl-15(Creepage distances and clearances)	-	2000	-
Cl-16(Screws, current-carrying parts and connections)	-	2000	-
Cl-17(Resistance to heat, fire and tracking)	-	2000	-
Cl-18(Resistance to corrosion)	-	2000	-
Cl-19(Information for luminaire design)	-	2000	-
Cl-20.1(Heat management- General)	-	2000	-
Cl-20.2(Thermal interface material)	-	2000	-
Cl-20.3(Heat protection)	-	2000	-
Cl-6(Marking)	-	2000	-
Cl-7.1(Integral terminals)	-	2000	-
Cl-7.2(Terminals other than integral terminals)	-	2000	-
Cl-8(Earthing)	-	2000	-
Cl-9(Protection against accidental contact with live parts)	-	2000	-
Cl-10(Moisture resistance and insulation)	-	2000	-
Cl-11(Electric strength)	-	2000	-
Cl-12.1(Fault conditions- General)	-	2000	-
Cl-12.2(Overpower condition)	-	2000	-
Cl-13(Conformity testing during manufacture)	-	2000	-
Cl-15(Creepage distances and clearances)	-	2000	-
Cl-16(Screws, current-carrying parts and connections)	-	2000	-
Cl-17(Resistance to heat, fire and tracking)	-	2000	-
Cl-18(Resistance to corrosion)	-	2000	-
Cl-19(Information for luminaire design)	-	2000	-
Cl-20.1(Heat management- General)	-	2000	-
Cl-20.2(Thermal interface material)	-	2000	-
Cl-20.3(Heat protection)	-	2000	-

03 Dec, 2026

-
Included w.e.f. 01.04.2026 Exclusion: Cl-21.1 (UV radiation), Cl-21.2 (Blue light hazard)

IS 302 : Part 2 : Sec 3 (2024)

Household and Similar Electrical Appliances âSafety Part 2 Particular Requirements Section 3 Electric Irons (Second Revision)

14500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4(General requirement)	-	1000	-
Cl-7(Marking and instructions)	-	1000	-
Cl-8(Protection against access to live parts)	-	1000	-
Cl-10(Power input and current)	-	1000	-
Cl-11(Heating)	-	1000	-
Cl-12(Charging of metal-ion batteries)	-	1000	-
Cl-13(Leakage current and electric strength at operating temperature)	-	1000	-
Cl-14(Transient overvoltages)	-	1000	-
Cl-15(Moisture resistance)	-	5000	-
Cl-16(Leakage current and electric strength)	-	1000	-
Cl-17(Overload protection of transformers and associated circuits)	-	1000	-
Cl-18(Endurance)	-	0	-
Cl-19(Abnormal operation)	-	1000	-
Cl-20(Stability and mechanical hazards)	-	1000	-
Cl-21(Mechanical strength)	-	1000	-
Cl-22(Construction)	-	1000	-
Cl-23(Internal wiring)	-	1000	-
Cl-24(Components)	-	0	-
Cl-25(Supply connection and external flexible cords)	-	1000	-
Cl-26(Terminals for external conductors)	-	1000	-
Cl-27(Provision for earthing)	-	1000	-
Cl-28(Screws and connections)	-	1000	-
Cl-29(Clearances, creepage distances and solid insulation)	-	1000	-
Cl-30(Resistance to heat and fire)	-	1000	-
Cl-31(Resistance to rusting)	-	1000	-
Cl-4(General requirement)	-	1000	-
Cl-7(Marking and instructions)	-	1000	-
Cl-8(Protection against access to live parts)	-	1000	-
Cl-10(Power input and current)	-	1000	-
Cl-11(Heating)	-	1000	-
Cl-12(Charging of metal-ion batteries)	-	1000	-
Cl-13(Leakage current and electric strength at operating temperature)	-	1000	-
Cl-14(Transient overvoltages)	-	1000	-
Cl-15(Moisture resistance)	-	5000	-
Cl-16(Leakage current and electric strength)	-	1000	-
Cl-17(Overload protection of transformers and associated circuits)	-	1000	-
Cl-18(Endurance)	-	1000	-
Cl-19(Abnormal operation)	-	1000	-
Cl-20(Stability and mechanical hazards)	-	1000	-
Cl-21(Mechanical strength)	-	1000	-
Cl-22(Construction)	-	1000	-
Cl-23(Internal wiring)	-	1000	-
Cl-25(Supply connection and external flexible cords)	-	1000	-
Cl-26(Terminals for external conductors)	-	1000	-
Cl-27(Provision for earthing)	-	1000	-
Cl-28(Screws and connections)	-	1000	-
Cl-29(Clearances, creepage distances and solid insulation)	-	1000	-
Cl-30(Resistance to heat and fire)	-	1000	-
Cl-31(Resistance to rusting)	-	1000	-

03 Dec, 2026

-
Included w.e.f 12.11.2025 Exclusion: Cl-19.11.4.1-Cl-19.11.4.7(EMI/EMC),Cl-24 (Components), Cl-32 (Radiation, toxicity and similar hazards)

IS 17681 (2022)

Specification for Bottled water dispensers

200000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Construction)	-	10000	-
4.1(General Design)	-	10000	-
4.3(Finish)	-	10000	-
4.4(Thermal Insulation)	-	10000	-
4.5(Hardware)	-	10000	-
4.6(Disposal of Waste Water)	-	10000	-
4.7(Hot Water Tank)	-	10000	-
4.8(Hermetically Sealed Compressor)	-	10000	-
4.9(Protective Guards)	-	10000	-
5(Refrigeration System)	-	10000	-
5.1(Pipes and Connections/Fitting)	-	10000	-
5.2(Control of Operation)	-	10000	-
6.1(General)	-	10000	-
6.1(Protection against electric shock (Cl. 8 of IS 302-2-24))	-	10000	-
6.1(Power Input & Current (Cl. 10 of IS 302-2-24))	-	10000	-
6.1(Temperature Rise/ Heating (Cl. 11 of IS 302-2-24))	-	10000	-
6.1("Insulation Resistance and Electric Strength/ Leakage Current and Electric Strength (Cl. 13 of IS 302-2-24)")	-	10000	-
6.1("Moisture Resistance (Cl. 15 of IS 302-2-24)")	-	10000	-
6.1("Insulation resistance and electric strength (After humidity treatment) (Cl. 16 of IS 302-2-24)")	-	10000	-
6.1("Provision For Earthing (Cl. 27 of IS 302-2-24)")	-	10000	-
6.1("Screws & Connections (Cl. 28 of IS 302-2-24)")	-	10000	-
6.2(Electrical Accessories)	-	10000	-
6.3(Salt Mist Test)	-	10000	-
7(Sound pressure level)	-	10000	-
10.1(Cooling Capacity Test)	-	10000	-
10.2(Maximum Operating Condition Test (Environmental))	-	10000	-
10.4(Heating Capacity Test)	-	10000	-
10.5(Annual Energy Consumption Test)	-	10000	-
10.6(Freeze-up Test)	-	10000	-
10.7(Door Opening and Closing Test)	-	10000	-
10.8(Door Seal Test)	-	10000	-
10.9(Pull-down Test)	-	10000	-
11(Marking and instruction)	-	10000	-
10.3(Maximum Operating Condition Test (Voltage))	-	10000	-
4.2(Materials)	-	10000	-
4(Construction)	-	10000	-
4.1(General Design)	-	10000	-
4.3(Finish)	-	10000	-
4.4(Thermal Insulation)	-	10000	-
4.5(Hardware)	-	10000	-
4.6(Disposal of Waste Water)	-	10000	-
4.7(Hot Water Tank)	-	10000	-
4.8(Hermetically Sealed Compressor)	-	10000	-
4.9(Protective Guards)	-	10000	-
5(Refrigeration System)	-	10000	-
5.1(Pipes and Connections/Fitting)	-	10000	-
5.2(Control of Operation)	-	10000	-
6.1(General)	-	10000	-
6.1(Protection against electric shock (Cl. 8 of IS 302-2-24))	-	10000	-
6.1(Power Input & Current (Cl. 10 of IS 302-2-24))	-	10000	-
6.1(Temperature Rise/ Heating (Cl. 11 of IS 302-2-24))	-	10000	-
6.1("Insulation Resistance and Electric Strength/ Leakage Current and Electric Strength (Cl. 13 of IS 302-2-24)")	-	10000	-
6.1("Moisture Resistance (Cl. 15 of IS 302-2-24)")	-	10000	-
6.1("Insulation resistance and electric strength (After humidity treatment) (Cl. 16 of IS 302-2-24)")	-	10000	-
6.1("Provision For Earthing (Cl. 27 of IS 302-2-24)")	-	10000	-
6.1("Screws & Connections (Cl. 28 of IS 302-2-24)")	-	10000	-
6.2(Electrical Accessories)	-	10000	-
6.3(Salt Mist Test)	-	10000	-
7(Sound pressure level)	-	10000	-
10.1(Cooling Capacity Test)	-	10000	-
10.2(Maximum Operating Condition Test (Environmental))	-	10000	-
10.4(Heating Capacity Test)	-	10000	-
10.5(Annual Energy Consumption Test)	-	10000	-
10.6(Freeze-up Test)	-	10000	-
10.7(Door Opening and Closing Test)	-	10000	-
10.8(Door Seal Test)	-	10000	-
10.9(Pull-down Test)	-	10000	-
11(Marking and instruction)	-	10000	-
10.3(Maximum Operating Condition Test (Voltage))	-	10000	-
4.2(Materials)	-	10000	-

03 Dec, 2026

-
Included w.e.f. 15.10.2025

IS 2083 (2024)

FLASHLIGHT- SPECIFICATION (Third Revision)

50000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Materials)	-	2000	-
6(Dimensions)	-	2000	-
8.1.1(Samples for Type Tests)	-	2000	-
8.2(Acceptance Tests)	-	2000	-
8.2(Acceptance Tests)	-	2000	-
8.2.1(Sample for Acceptance Tests)	-	2000	-
8.3(Routine Tests)	-	2000	-
10(TEST FOR MECHANICAL ASSEMBLY)	-	2000	-
11(DROP TEST)	-	2000	-
12.1(Dry Heat Tests)	-	2000	-
12.2(Damp Heat (Accelerated) Test)	-	2000	-
12.3(Dry Cold Test (Optional))	-	2000	-
13(LIFE TEST FOR SWITCH)	-	2000	-
14.1(INSULATION RESISTANCE TEST)	-	2000	-
15(TEST FOR CONTACT RESISTANCE OF THE SWITCH)	-	2000	-
16(LIGHT DISTRIBUTION TEST)	-	2000	-
17(LUMEN DEPRECIATION TEST FOR LED FLASHLIGHT)	-	2000	-
18(CIRCUIT CURRENT OF LED FLASHLIGHT)	-	2000	-
21(TEST FOR INGRESS PROTECTION)	-	2000	-
24(THERMAL TEST)	-	2000	-
7(MARKING)	-	2000	-
19(TEST FOR CHARGING CURRENT IN BUILT-IN RECHARGEABLE BATTERY OPERATED FLASHLIGHTS)	-	2000	-
22(OVER CHARGE PROTECTION IN RECHARGEABLE FLASHLIGHTS WITH BUILT-IN CHARGER/SEPARATE CHARGER/ SOLAR CHARGER)	-	2000	-
24(THERMAL TEST)	-	2000	-

03 Dec, 2026

-
Included w.e.f. 28.08.2025 Exclusion: "9 (TEST FOR FINISH) 20 (PHOTOBIOLOGICAL SAFETY)"

IS 2082 (2018)

Stationary storage type electric water heaters - Specification (Fifth Revision)

Up to 250 Volt and 415 Volt for other appliances

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking)	-	500	-
7(Marking)	-	0	-
7(Marking)	-	0	-
7(Marking)	-	0	-
7(Marking)	-	0	-
7(Marking)	-	0	-
7(Marking)	-	0	-
7(Marking)	-	0	-
7(Marking)	-	0	-
7(Marking)	-	0	-
7(Marking)	-	0	-
7(Marking)	-	0	-
7(Marking)	-	0	-
7(Marking)	-	0	-
7(Marking)	-	0	-
7(Marking)	-	0	-
7(Marking)	-	0	-
7(Marking)	-	0	-
7(Marking)	-	0	-
7(Marking)	-	0	-
7(Marking)	-	0	-
7(Marking)	-	0	-
7(Marking)	-	0	-
7(Marking)	-	0	-
7(Marking)	-	0	-
7(Marking)	-	0	-
7(Marking)	-	0	-
7(Marking)	-	0	-
6(Classification )	-	500	-
6(Classification )	-	0	-
(Cl.8 of IS 302-2-21:2011)(Protection Against Access to Live Parts)	-	500	-
(Cl.10 of IS 302-2-21: 2011)(Power Input & Current)	-	500	-
(Cl.11 of 302-2-21:2011)(Heating)	-	1000	-
(Cl.11 of 302-2-21:2011)(Heating)	-	0	-
(Cl.11 of 302-2-21:2011)(Heating)	-	0	-
(Cl.13 of IS 302-2-21:2011)(Leakage Current )	-	1000	-
(Cl.13 of IS 302-2-21:2011)(Electrical Strength at Operating Temperature)	-	0	-
(Cl.14ofIS302-2-21:2011)(Transient Over Voltages)	-	0	-
(Cl.15 of IS 302-2-21-2011)(Moisture Resistance)	-	1000	-
(Cl.15 of IS 302-2-21-2011)(Moisture Resistance)	-	0	-
(Cl.15 of IS 302-2-21-2011)(Moisture Resistance)	-	0	-
(Cl.17 of IS 302-2-21:2011)(Overload protection of transformers & associated circuits)	-	0	-
(Cl.19 of IS 302-2-21:2011)(Abnormal Operation)	-	1000	-
(Cl.19 of IS 302-2-21:2011)(Abnormal Operation)	-	0	-
(Cl.19 of IS 302-2-21:2011)(Abnormal Operation)	-	0	-
(Cl.19 of IS 302-2-21:2011)(Abnormal Operation)	-	0	-
(Cl.20 of IS 302-2-21:2011)(Stability & Mechanical Hazards)	-	500	-
(Cl.21ofIS302-2-21:2011)(Mechanical strength)	-	100	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	500	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	0	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	0	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	0	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	0	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	0	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	0	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	0	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	0	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	0	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	0	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	0	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	0	-
(Cl.24ofIS302-221:2011)(Component)	-	500	-
(Cl.24ofIS302-221:2011)(Component)	-	0	-
(Cl.24ofIS302-221:2011)(Component)	-	0	-
(Cl.24ofIS302-221:2011)(Component)	-	0	-
(Cl.24ofIS302-221:2011)(Component)	-	0	-
(Cl.24ofIS302-221:2011)(Component)	-	0	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	500	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	0	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	0	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	0	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	0	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	0	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	0	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	0	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	0	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	0	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	0	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	0	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	0	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	0	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	0	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	0	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	0	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	0	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	0	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	0	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	0	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	0	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	500	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	0	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	0	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	0	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	0	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	0	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	0	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	0	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	0	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	0	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	0	-
(Cl.27 of IS 302-2-21:2011)(Provision for Earthing)	-	500	-
(Cl.27 of IS 302-2-21:2011)(Provision for Earthing)	-	0	-
(Cl.27 of IS 302-2-21:2011)(Provision for Earthing)	-	0	-
(Cl.27 of IS 302-2-21:2011)(Provision for Earthing)	-	0	-
(Cl.27 of IS 302-2-21:2011)(Provision for Earthing)	-	0	-
(Cl.27 of IS 302-2-21:2011)(Provision for Earthing)	-	0	-
(Cl.28 of IS 302-2-21:2011)(Screws & Connections)	-	500	-
(Cl.29ofIS302-2-21:2011)(Clearances, Creepage Distances and Solid Insulation)	-	500	-
(Cl.30 of IS 302-2-21:2011)(Resistance to Heat & Fire)	-	1000	-
(Cl.30 of IS 302-2-21:2011)(Resistance to Heat & Fire)	-	0	-
(Cl.31 of IS 302-2-21:2011)(Resistance to Rusting)	-	500	-
(Cl.15 of IS 2082:2018)(Verification of the Rated Capacity)	-	1000	-
(Cl.16 of IS 2082:2018)(Standing Loss per 24 Hours)	-	3000	-
(Cl.17 of IS 2082:2018)(Hot Water Output)	-	1000	-
(Cl.18 of IS 2082:2018)( Reheating Time)	-	1000	-
(Cl.19 of IS 2082:2018)(Mixing Factor)	-	1000	-
(Cl.20 of IS 2082:2018)(Deviation of Dial Calibration)	-	1000	-
(Cl.21 of IS 2082:2018)(Cyclic Temperature Variation)	-	1000	-
(Cl.22 of IS 2082:2018)(Finish)	-	0	-
Cl.22 of IS 2082:2018(Finish)	-	0	-
Cl.21 of IS 2082:2018(Cyclic Temperature Variation)	-	0	-
Cl.20 of IS 2082:2018(Deviation of Dial Calibration)	-	0	-
Cl.19 of IS 2082:2018(Mixing Factor)	-	0	-
Cl.18 of IS 2082:2018( Reheating Time)	-	0	-
Cl.17 of IS 2082:2018(Hot Water Output)	-	0	-
Cl.16 of IS 2082:2018(Standing Loss per 24 Hours)	-	0	-
Cl.15 of IS 2082:2018(Verification of the Rated Capacity)	-	0	-
Cl.31 of IS 302-2-21:2018(Resistance to Rusting)	-	0	-
Cl.30.2 of IS 302-1:2008(Resistance to Heat & Fire : Glow wire test )	-	0	-
Cl.30.1 of IS 302-1:2008(Resistance to Heat & Fire : Ball pressure test )	-	0	-
Cl.29.2 of IS 302-1:2008(Clearances, Creepage Distances and Solid Insulation : Creepage distance )	-	0	-
Cl.29.1 of IS 302-1:2008(Clearances, Creepage Distances and Solid Insulation : Clearance distance )	-	0	-
Cl.28 of IS 302-2-21:2018(Screws & Connections)	-	0	-
Cl.27.5 of IS 302-1:2008(Provision for Earthing : ECR )	-	0	-
Cl.27 of IS 302-2-21:2018(Provision for Earthing)	-	0	-
Cl.26 of IS 302-2-21: 2018(Terminals for External Conductors)	-	0	-
Cl.25.18 of IS 302-1:2008(Supply Connection & External Flexible Cords)	-	0	-
Cl.25.15 of IS 302-1:2008(Supply Connection & External Flexible Cords : Cord grip test )	-	0	-
Cl.25.12 of IS 302-1:2008(Supply Connection & External Flexible Cords : Moulding of supply cord )	-	0	-
Cl.25.10 of IS 302-1:2008(Supply Connection & External Flexible Cords : Colour of Earthing conductor )	-	0	-
Cl.25.8 of IS 302-2-21:2018(Supply Connection & External Flexible Cords : Resistance of supply cord )	-	0	-
Cl.25.5 of IS 302-1:2008(Supply Connection & External Flexible Cords : Type of attachment )	-	0	-
Cl.25 of IS 302-2-21:2018(Supply Connection & External Flexible Cords : connection to the supply mains)	-	0	-
Cl.24.102 of IS 302-221:2018(Component : Operation of thermal cut-out )	-	0	-
Cl.25.15 of IS 302-1:2008(Supply Connection & External Flexible Cords : Cord grip test - displacement )	-	0	-
Cl.24.101 of IS302-221:2018(Component : Location of non self reseting thermal cut out )	-	0	-
Cl.24of IS 302-221:2018(Component : Relevent Indian standards )	-	0	-
Cl. 23 of IS 302-1:2008(Internal Wiring : color identification for earthing conductor )	-	0	-
Cl. 23 of IS 302-1:2008(Internal Wiring )	-	0	-
Cl.22.111 of IS 302-2-21:2018(Construction : Resistance to vacuum )	-	0	-
Cl.22.110 of IS 302-2-21:2018(Construction : meterial of connections )	-	0	-
Cl.22.110 of IS 302-2-21:2018(Construction : Material of Inner conatiner )	-	0	-
Cl.22.109 of IS 302-2-21:2018(Construction : Drain for appliance having a capacity of more than 15 liter)	-	0	-
Cl.22.108 of IS 302-2-21:2018(Construction : fixing to wall )	-	0	-
Cl.22.107 of IS 302-2-21:2018(Construction : Position of Heating elements and thermal control sensor)	-	0	-
Cl.22.106 of IS 302-2-21:2018(Construction : Operation of thermal cut- out )	-	0	-
Cl.22.104 of IS 302-2-21:2018(Construction : Outlet of open outlet heater )	-	0	-
Cl.22.103 of IS 302-2-21:2018(Construction : Operation of Pressure relieve devices )	-	0	-
Cl.22.102 of IS 302-2-21:2018(Construction : repeated drawing of water temp )	-	0	-
Cl.22.101 of IS 302-2-21:2018(Construction : rated pressure of closed water heater )	-	0	-
Cl.22.47 of IS 302-2-21:2018 (Construction : Water pressure test )	-	0	-
Cl.22.44 of IS 302-1:2008(Construction : Shape and decoration of enclosure)	-	0	-
Cl.22.34, Cl 22.35 of IS 302-1:2008(Construction : Shaft of operating Knobs )	-	0	-
Cl.22.33 of IS 302-1:2008(Construction : Direct contact of liquids )	-	0	-
Cl 22.26 ,Cl.22.28, Cl 22.29, Cl 22.30 , Cl 22.31, Cl 22.32 of IS 302-1:2008(Construction : Supplymentry/ double / reinforced insulation for Class II/ Class III appliance )	-	0	-
Cl.22.18 Of IS 302-1:2008(Construction : Resistance to corrosion )	-	0	-
Cl.22.17 of IS 302-1:2008(Construction : Spacers )	-	0	-
Cl.22.14 of IS 302-1:2008(Construction : ragged or sharp edges)	-	0	-
Cl.22.12 of IS 302-1:2008(Construction : Fixing of Handle, knob, grips, levers and similar parts)	-	0	-
Cl.22.11 of IS 302-1:2008(Construction : Fixing of non detachable part )	-	0	-
Cl.22.7 of IS 302-1:2008(Construction: adequate safeguards against the risk of excessive pressure)	-	0	-
Cl.22.6 of IS 302-2-21:2018(Construction : Size of drain hole )	-	0	-
Cl.22.2 of IS 302-1:2008(Construction : Provision to ensure all pole disconnection )	-	0	-
Cl.22.1 of IS 302-1:2008(Construction : IP test )	-	0	-
Cl.22.6 of IS 302-1:2008(Construction : Effect of water on 3 insulation )	-	0	-
Cl.21.2 of IS 302-1:2008(Mechanical strength : prevent penetration by sharp implements. )	-	0	-
Cl.21.1 of IS 302-1:2008(Mechanical strength : Rough handling in normal use)	-	0	-
Cl.20 of IS 302-1:2008(Stability & Mechanical Hazards)	-	0	-
Cl.19 of IS 302-2-21:2018(Abnormal Operation : leakage from container during test)	-	0	-
Cl.19 of IS 302-2-21:2018(Abnormal Operation : High Voltage )	-	0	-
Cl.19 of IS 302-2-21:2018(Abnormal Operation : Insulation of the supply cable or cord)	-	0	-
Cl.19 of IS 302-2-21:2018(Abnormal Operation : Wall ceiling temp. of test corner )	-	0	-
Cl.19 of IS 302-2-21:2018(Abnormal Operation : emission of flame or molten metal or poisonous or ignitable gas )	-	0	-
Cl.16 of IS 302-2-21-2018(Leakage current and Electric strength (After humidity): Electric Strentgh )	-	1000	-
Cl.16 of IS 302-2-21-2018(Leakage current and Electric strength (After humidity): Leakage current )	-	0	-
Cl.15 of IS 302-2-21-2018(Moisture Resistance)	-	0	-
Cl.14 of IS 302-2-21:2018(Transient Over Voltages)	-	0	-
Cl.13 of IS 302-2-21:2018(3 Strength at Operating Temperature)	-	0	-
Cl.13 of IS 302-2-21:2018(Leakage Current )	-	0	-
Cl.11 of 302-2-21:2018(Heating : Room Temp.)	-	0	-
Cl.11 of 302-2-21:2018(Heating : Temp of Rubber or PVC insulation of internal and external wiring)	-	0	-
Cl.11 of 302-2-21:2018(Heating : Temp of Walls, ceilings and floor of the test corner )	-	0	-
Cl.10 of IS 302-2-21: 2018(Power Input & Current)	-	0	-
Cl.8 of IS 302-2-21:2018(Protection Against Access to Live Parts)	-	0	-
7.101(Marking : Indifiction of water inlet and water outlet )	-	0	-
7.14(Marking : Legibility and durability)	-	0	-
7.13(Marking : Official language of Instruction )	-	0	-
7.11(Marking : Indication of controls )	-	0	-
7.8(Marking : Terminals )	-	0	-
7.6(Marking : Symbol used )	-	0	-
7.1(Marking : Warning for Open- outlet )	-	0	-
7.1(Marking : Statement for pressure reducing valve ( For rated pressure less than 0.6 MPa))	-	0	-
7.1(Marking : Statement for a pressure-relief device)	-	0	-
7.1(Marking : Rated capacity)	-	0	-
7.1(Marking : Rated pressure)	-	0	-
7.1(Marking : Country of manufacture)	-	0	-
7.1(Marking: IP Number)	-	0	-
7.1(Marking: Symbol for Class II)	-	0	-
7.1(Marking: Model or type reference)	-	0	-
7.1(Marking: Name, trademark or identification mark of manufacturer )	-	0	-
7.1(Marking : Rated power input)	-	0	-
7.1(Marking : Symbol for nature of supply )	-	0	-
7.1(Marking : Rated Voltage )	-	0	-
Cl.32 of IS 302-1:2008()	-	0	-
4(GENERAL REQUIREMENT)	-	0	-
5(GENERAL CONDITIONS FOR THE TESTS)	-	0	-
12(THERMOSTAT SETTING)	-	0	-
Cl-10(Mounting of the water heater)	-	0	-
Cl-11(Measurements of stored water temperature)	-	0	-
Cl-12(Thermostat setting)	-	0	-
Cl-13(Measurement of energy consumption)	-	0	-
Cl-14(Verification of the rated capacity)	-	0	-

03 Dec, 2026

-
-

IS 8978 (1992)

Specification for electric instantaneous water heaters (Second Revision)

Up to 3 liter

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.7 of IS 302-2-35:2017(Marking)	-	500	-
Cl.7 of IS 302-2-35:2017(Marking)	-	0	-
Cl.7 of IS 302-2-35:2017(Marking)	-	0	-
Cl.7 of IS 302-2-35:2017(Marking)	-	0	-
Cl.7 of IS 302-2-35:2017(Marking)	-	0	-
Cl.7 of IS 302-2-35:2017(Marking)	-	0	-
Cl.7 of IS 302-2-35:2017(Marking)	-	0	-
Cl.7 of IS 302-2-35:2017(Marking)	-	0	-
Cl.7 of IS 302-2-35:2017(Marking)	-	0	-
Cl.7 of IS 302-2-35:2017(Marking)	-	0	-
Cl.7 of IS 302-2-35:2017(Marking)	-	0	-
Cl.7 of IS 302-2-35:2017(Marking)	-	0	-
Cl.7 of IS 302-2-35:2017(Marking)	-	0	-
Cl.7 of IS 302-2-35:2017(Marking)	-	0	-
Cl.7 of IS 302-2-35:2017(Marking)	-	0	-
Cl.7 of IS 302-2-35:2017(Marking)	-	0	-
Cl.7 of IS 302-2-35:2017(Marking)	-	0	-
Cl.7 of IS 302-2-35:2017(Marking)	-	0	-
Cl.7 of IS 302-2-35:2017(Marking)	-	0	-
Cl.7 of IS 302-2-35:2017(Marking)	-	0	-
Cl.7 of IS 302-2-35:2017(Marking)	-	0	-
Cl.6 of IS 302-2-35:2017(Classification)	-	500	-
Cl.6 of IS 302-2-35:2017(Classification)	-	0	-
Cl.8 of IS 302-2-35:2017(Protection Against Access To Live Parts)	-	500	-
Cl.10 of IS 302-2- 35:2011(Power Input & Current )	-	500	-
Cl.11 of 302-2-35:2017(Heating)	-	1000	-
Cl.7 of IS 302-2-35:2017(Marking)	-	0	-
Cl.7 of IS 302-2-35:2017(Marking)	-	0	-
Cl.7 of IS 302-2-35:2017(Marking)	-	0	-
Cl.7 of IS 302-2-35:2017(Marking)	-	0	-
Cl.11 of 302-2-35:2017(Heating)	-	0	-
Cl.11 of 302-2-35:2017(Heating)	-	0	-
Cl.11 of 302-2-35:2017(Heating)	-	0	-
Cl.13 of IS 302-2-35:2017(Leakage Current & Electrical Strength at Operating Temperature )	-	1000	-
Cl.13 of IS 302-2-35:2017(Leakage Current & Electrical Strength at Operating Temperature )	-	0	-
Cl.14 of IS 302-2-35:2017(Transient Over Voltages )	-	0	-
Cl.15 of IS 302-2-35-2011(Moisture Resistance )	-	1000	-
Cl.15 of IS 302-2-35-2011(Moisture Resistance )	-	0	-
Cl.16 of IS 302-2-35:2011(Leakage Current and Electric Strength)	-	1000	-
Cl.16 of IS 302-2-35:2011(Leakage Current and Electric Strength)	-	0	-
Cl.17 IS 302-2-35:2017(Overload Protection of Transformers & Associated circuits )	-	0	-
Cl.19 of IS 302-2-35:2017(Abnormal Operation)	-	1000	-
Cl.19 of IS 302-2-35:2017(Abnormal Operation)	-	0	-
Cl.19 of IS 302-2-35:2017(Abnormal Operation)	-	0	-
Cl.19 of IS 302-2-35:2017(Abnormal Operation)	-	0	-
Cl.19 of IS 302-2-35:2017(Abnormal Operation)	-	0	-
Cl.20 of IS 302-2-35-2011(Stability & Mechanical Hazards )	-	500	-
Cl.21.1 of IS 302-2-35-2011(Mechanical strength)	-	1000	-
Cl. 21.2 of IS 302-1:2008(Mechanical strength)	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	1500	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.23 of IS 302-2-35-2011(Internal Wiring)	-	500	-
Cl.23 of IS 302-2-35-2011(Internal Wiring)	-	0	-
Cl.23 of IS 302-2-35-2011(Internal Wiring)	-	0	-
Cl.23 of IS 302-2-35-2011(Internal Wiring)	-	0	-
Cl.23 of IS 302-2-35-2011(Internal Wiring)	-	0	-
Cl.23 of IS 302-2-35-2011(Internal Wiring)	-	0	-
Cl.23 of IS 302-2-35-2011(Internal Wiring)	-	0	-
Cl.23 of IS 302-2-35-2011(Internal Wiring)	-	0	-
Cl.23 of IS 302-2-35-2011(Internal Wiring)	-	0	-
Cl.23 of IS 302-2-35-2011(Internal Wiring)	-	0	-
Cl.23 of IS 302-2-35-2011(Internal Wiring)	-	0	-
Cl.23 of IS 302-2-35-2011(Internal Wiring)	-	0	-
Cl.23 of IS 302-2-35-2011(Internal Wiring)	-	0	-
Cl.23 of IS 302-2-35-2011(Internal Wiring)	-	0	-
Cl.24 of IS 302-2-35:2017(Component )	-	500	-
Cl.24 of IS 302-2-35:2017(Component )	-	0	-
Cl.24 of IS 302-2-35:2017(Component )	-	0	-
Cl.24 of IS 302-2-35:2017(Component )	-	0	-
Cl.24 of IS 302-2-35:2017(Component )	-	0	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	500	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	0	-
Cl.26 of IS 302-2-35:2017(Terminals for External Conductors)	-	500	-
Cl.26 of IS 302-2-35:2017(Terminals for External Conductors)	-	0	-
Cl.26 of IS 302-2-35:2017(Terminals for External Conductors)	-	0	-
Cl.26 of IS 302-2-35:2017(Terminals for External Conductors)	-	0	-
Cl.26 of IS 302-2-35:2017(Terminals for External Conductors)	-	0	-
Cl.26 of IS 302-2-35:2017(Terminals for External Conductors)	-	0	-
Cl.26 of IS 302-2-35:2017(Terminals for External Conductors)	-	0	-
Cl.26 of IS 302-2-35:2017(Terminals for External Conductors)	-	0	-
Cl.26 of IS 302-2-35:2017(Terminals for External Conductors)	-	0	-
Cl.26 of IS 302-2-35:2017(Terminals for External Conductors)	-	0	-
Cl.26 of IS 302-2-35:2017(Terminals for External Conductors)	-	0	-
Cl.27 of IS 302-2-35:2017(Provision for Earthing)	-	500	-
Cl.27 of IS 302-2-35:2017(Provision for Earthing)	-	0	-
Cl.27 of IS 302-2-35:2017(Provision for Earthing)	-	0	-
Cl.27 of IS 302-2-35:2017(Provision for Earthing)	-	0	-
Cl.27 of IS 302-2-35:2017(Provision for Earthing)	-	0	-
Cl.27 of IS 302-2-35:2017(Provision for Earthing)	-	0	-
Cl.27 of IS 302-2-35:2017(Provision for Earthing)	-	0	-
Cl.28 of IS 302-2-35:2017(Screws and Connections )	-	500	-
Cl.29 of IS 302-2-35:2017(Clearances, Creepage Distances and Solid Insulation)	-	500	-
Cl.29 of IS 302-2-35:2017(Clearances, Creepage Distances and Solid Insulation)	-	0	-
Cl.29 of IS 302-2-35:2017(Clearances, Creepage Distances and Solid Insulation)	-	0	-
Cl.30 of IS 302-2-35: 2011(Resistance to Heat and Fire)	-	2000	-
Cl.31 of IS 302-2-35: 2011(Resistance to Rusting )	-	500	-
Cl.32 of IS 302-2-35: 2011(Radiation, Toxicity and Similar Hazards )	-	0	-
Cl.10 of IS 8978 : 1992(Finish)	-	1000	-
Cl.11 of IS 8978 : 1992(Operation of flow switch)	-	1000	-
Cl.30 of IS 302-2-35: 2011(Resistance to Heat and Fire)	-	0	-
Cl.12 of IS 8978 : 1992(Endurance)	-	1000	-
Cl.12 of IS 8978 : 1992(Endurance)	-	0	-
Cl.10 of IS 8978 : 1992(Finish)	-	0	-
Cl.31 of IS 302-2-35: 2017(Resistance to Rusting )	-	0	-
Cl.30.2 of IS 302-1:2008(Resistance to Heat and Fire)	-	0	-
Cl.30.1 of IS 302-1:2008(Resistance to Heat and Fire)	-	0	-
Cl.29.2 of IS 302-2-35:2017(Clearances, Creepage Distances and Solid Insulation : Creepage distance )	-	0	-
Cl.29.1 of IS 302-2-35:2017(Clearances, Creepage Distances and Solid Insulation : Clearance distance )	-	0	-
Cl.28 of IS 302-2-35:2017(Screws and Connections )	-	0	-
Cl.27.5 of IS 302-2-35:2017(Provision for Earthing : ECR )	-	0	-
Cl.27 of IS 302-2-35:2017(Provision for Earthing)	-	0	-
Cl.26 of IS 302-2-35:2017(Terminals for External Conductors)	-	0	-
Cl.25.18 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	0	-
Cl.25.15 of IS 302-2-35:2017(Supply Connection & External Flexible Cords : Cord grip test - displacement )	-	0	-
Cl.25.15 of IS 302-2-35:2017(Supply Connection & External Flexible Cords : Cord grip test )	-	0	-
Cl.25.12 of IS 302-2-35:2017(Supply Connection & External Flexible Cords : Moulding of supply cord )	-	0	-
Cl.25.10 of IS 302-2-35:2017(Supply Connection & External Flexible Cords : Colour of Earthing conductor )	-	0	-
Cl.25.8 of IS 302-2-35:2017(Supply Connection & External Flexible Cords : Resistance of supply cord )	-	0	-
Cl.25.5 of IS 302-2-35:2017(Supply Connection & External Flexible Cords : Type of attachment )	-	0	-
Cl.25.1 of IS 302-2-35:2017(Supply Connection & External Flexible Cords : connection to the supply mains)	-	0	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	0	-
Cl.24 of IS 302-2-35:2017(Component )	-	0	-
Cl.23 of IS 302-2-35:2017(Internal Wiring ; Colour of earthing conductor)	-	0	-
Cl.23 of IS 302-2-35:2017(Internal Wiring)	-	0	-
Cl.22.110 of IS 302-2-35:2017(Construction : Provision for fixing to wall )	-	0	-
Cl.22.109 of IS 302-2-35:2017(Construction : Operation of presure switch of open outlet water heater )	-	0	-
Cl.22.108 of IS 302-2-35:2017(Construction : Temperature of outlet water intended to supply for showring )	-	0	-
Cl.22.107 of IS 302-2-35:2017(Construction : Temperature of outlet )	-	0	-
Cl.22.106 of IS 302-2-35:2017(Construction : Operation of thermal cut out for closed water heater )	-	0	-
Cl.22.104 of IS 302-2-35:2017(Construction : Pressure in open outlet water heaters )	-	0	-
Cl.22.103 of IS 302-2-35:2017(Construction : Pressure relief device operation for closed water heater )	-	0	-
Cl.22.102 of IS 302-2-35:2017(Construction : excessive temperature of outlet )	-	0	-
Cl.22.101 of IS 302-2-35:2017(Construction : Rated pressure of closed water heater )	-	0	-
Cl.22.47 of IS 302-2-35:2017(Construction : Water pressure test )	-	0	-
Cl.22.44 of IS 302-1:2008(Construction : Shape and decoration )	-	0	-
Cl.22.34, Cl 22.35 of IS 302-1:2008(Construction : Shaft of operating Knobs )	-	0	-
Cl.22.33 of IS 302-1:2008(Construction : Direct contact of liquids )	-	0	-
Cl 22.26 ,Cl.22.28, Cl 22.29, Cl 22.30 , Cl 22.31, Cl 22.32 of IS 302-1:2008(Construction : Supplymentry/ double / reinforced insulation for Class II/ Class III appliance )	-	0	-
Cl.22.18 of IS 302-1:2008(Construction : Resistance to corrosion )	-	0	-
Cl.22.17 of IS 302-1:2008(Construction : Spacers )	-	0	-
Cl.22.14 of IS 302-1:2008(Construction : Ragged or sharp edges )	-	0	-
Cl.22.12 of IS 302-1:2008(Construction : Fixing of Handle, knob, grips, levers and similar parts )	-	0	-
Cl.22.11 of IS 302-1:2008(Construction : Fixing of non detachable parts )	-	0	-
Cl.22.7 of IS 302-1:2008(Construction : safeguards against the risk of excessive pressure. )	-	0	-
Cl.22.6 of IS 302-2-35:2017(Construction : size of drain hole )	-	0	-
Cl.22.6 of IS 302-1:2008(Construction : effect of water on 3 insulation )	-	0	-
Cl.22.2 of IS 302-1:2008(Construction : connection to supply mains )	-	0	-
Cl.22.1 of IS 302-1:2008(Construction : IP test )	-	0	-
Cl. 21.2 of IS 302-1:2008(Mechanical strength : prevent penetration by sharp implements. )	-	0	-
Cl.20 of IS 302-2-35:2017(Stability & Mechanical Hazards )	-	0	-
Cl.21.1 of IS 302-1:2008(Mechanical strength : Rough handling in normal use)	-	0	-
Cl.19 of IS 302-2-35:2017(Abnormal Operation : effect on container)	-	0	-
Cl.19 of IS 302-2-35:2017(Abnormal Operation : High voltage)	-	0	-
Cl.19 of IS 302-2-35:2017(Abnormal Operation : Temperature rise of insulation of supply cord)	-	0	-
Cl.19 of IS 302-2-35:2017(Abnormal Operation : Temperature rise of test corner)	-	0	-
Cl.19 of IS 302-2-35:2017(Abnormal Operation : Emission of flames, molten metal ,or poisonous or ignitable gas)	-	0	-
Cl.16 of IS 302-2-35:2017(Leakage Current and Electric Strength (After Humidity))	-	0	-
Cl.16 of IS 302-2-35:2017(Leakage Current and Electric Strength (After Humidity))	-	0	-
Cl.15 of IS 302-2-35:2017(Moisture Resistance )	-	0	-
Cl.14 of IS 302-2-35:2017(Transient Over Voltages )	-	0	-
Cl.13 of IS 302-2-35:2017(Leakage Current & 3 Strength at Operating Temperature : High voltage )	-	0	-
Cl.13 of IS 302-2-35:2017(Leakage Current & 3 Strength at Operating Temperature )	-	0	-
Cl.11 of 302-2-35:2017(Heating : room temperature)	-	0	-
Cl.11 of 302-2-35:2017(Heating : Insulation of supply cord)	-	0	-
Cl.11 of 302-2-35:2017(Heating : Temperature rise of test corner)	-	0	-
Cl.10 of IS 302-2- 35:2017(Power Input & Current )	-	0	-
Cl.8 of IS 302-2-35:2017(Protection Against Access To Live Parts)	-	0	-
Cl.7.102 of IS 302-2-35:2017(Marking : Standard mark)	-	0	-
Cl.7.101 of IS 302-2-35:2017(Marking : Woter inlet and outlet idetification)	-	0	-
Cl.7.15 of IS 302-1:2008(Marking : Position of marking)	-	0	-
Cl.7.14 of IS 302-1:2008(Marking ; Legibility and durability)	-	0	-
Cl.7.13 of IS 302-1:2008(Marking : Language)	-	0	-
Cl.7.10 & 7.11 of IS 302-1:2008(Marking : Indication for direction of control)	-	0	-
Cl.7.8 of IS 302-1:2008(Marking : Terminal for connection )	-	0	-
Cl.7.6 of IS 302-1:2008(Marking : Symbols)	-	0	-
Cl.7.1 of IS 302-2-35:2017(Marking : rated pressure)	-	0	-
Cl.7.1 of IS 302-1:2008(Marking : Country of manufacture)	-	0	-
Cl.7.1 of IS 302-1:2008(Marking : IP number )	-	0	-
Cl.7.1 of IS 302-1:2008(Marking : Symbol for class II)	-	0	-
Cl.7.1 of IS 302-1:2008(Marking : Molel or type)	-	0	-
Cl.7.1 of IS 302-1:2008(Marking : Manufacture identification)	-	0	-
Cl.7.1 of IS 302-1:2008(Marking : Rated power input)	-	0	-
Cl.7.1 of IS 302-1:2008(Marking : Nature of supply)	-	0	-
Cl.7.1 of IS 302-1:2008(Marking : Rated Voltage)	-	0	-
4(GENERAL REQUIREMENTS)	-	0	-
5(GENERAL NOTE ON TEST)	-	0	-
Cl-19.11.4.1(Electrostatic discharge)	-	0	-
Cl-19.11.4.2(Radiated Fields)	-	0	-
Cl-19.11.4.3(Fast transient bursts)	-	0	-
Cl-19.11.4.4(Surge Immunity test)	-	0	-
Cl-19.11.4.5(Immunity to conducted discharge)	-	0	-
Cl-19.11.4.6(Voltage dips and interruptions)	-	0	-
Cl-19.11.4.7(Harmonics)	-	0	-

03 Dec, 2026

-
-

IS 368 (2014)

Electric immersion water heaters - Specification (Fifth Revision)

Up to 250 V0lt

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.6 of IS 302-‐2-‐201:2008(Classification)	-	500	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	500	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.8 of IS 302‐2-201: 2008(Protection Against Access to Live Parts)	-	500	-
Cl.10 of IS 302‐2‐201:2008(Power Input and Current )	-	1000	-
Cl.11 of IS 302-2201: 2008(Heating)	-	1500	-
Cl.11 of IS 302-2201: 2008(Heating)	-	0	-
Cl.11 of IS 302-2201: 2008(Heating)	-	0	-
Cl.11 of IS 302-2201: 2008(Heating)	-	0	-
Cl.11 of IS 302-2201: 2008(Heating)	-	0	-
Cl.11 of IS 302-2201: 2008(Heating)	-	0	-
Cl.11 of IS 302-2201: 2008(Heating)	-	0	-
Cl.11 of IS 302-2201: 2008(Heating)	-	0	-
Cl.11 of IS 302-2201: 2008(Heating)	-	0	-
Cl.11 of IS 302-2201: 2008(Heating)	-	0	-
Cl.11 of IS 302-2201: 2008(Heating)	-	0	-
Cl. 12 of IS 368:2014(Operation under overload conditions of appliances with heating elements)	-	2000	-
Cl.13 of IS 302-2-201: 2008(Leakage Current & Electric Strength at Operating Temperature)	-	1000	-
Cl.13 of IS 302-2-201: 2009(Leakage Current & Electric Strength at Operating Temperature)	-	0	-
Cl.14 of IS 302‐2-201:2008(Transient Over Voltages )	-	0	-
Cl.15 of IS 302-2-201:2008(Moisture Resistance )	-	1000	-
Cl.15 of IS 302-2-201:2008(Moisture Resistance )	-	0	-
Cl.16 of IS 302-2-201:2008(Leakage Current & Electric Strength)	-	1000	-
Cl.16 of IS 302-2-201:2008(Leakage Current & Electric Strength)	-	0	-
Cl.17 of IS 302‐2-201: 2008(Overload Protection of Transformers & Associated Circuits)	-	0	-
Cl.18 of IS 368:2014(Endurance)	-	2500	-
Cl.19 of IS 302‐2-201: 2008(Abnormal Operation )	-	1500	-
Cl.19 of IS 302‐2-201: 2008(Abnormal Operation )	-	0	-
Cl.19 of IS 302‐2-201: 2008(Abnormal Operation )	-	0	-
Cl.19 of IS 302‐2-201: 2008(Abnormal Operation )	-	0	-
Cl.19 of IS 302‐2-201: 2008(Abnormal Operation )	-	0	-
Cl.20 of IS 302-2-201: 2008(Stability & Mechanical Hazards)	-	500	-
Cl.21 of IS 302-2-201: 2008(Mechanical Strength )	-	1000	-
Cl.21 of IS 302-2-201: 2008(Mechanical Strength )	-	0	-
Cl.21 of IS 302-2-201: 2008(Mechanical Strength )	-	0	-
Cl.22 of IS 302-2-201: 2008(Construction)	-	500	-
Cl.22 of IS 302-2-201: 2008(Construction)	-	0	-
Cl.22 of IS 302-2-201: 2008(Construction)	-	0	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	500	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	0	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	0	-
Cl.22 of IS 302-2-201: 2008(Construction)	-	0	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	0	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	0	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	0	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	0	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	0	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	0	-
Cl.24 of IS 302-2-201: 2008(Component)	-	500	-
Cl.24 of IS 302-2-201: 2008(Component)	-	0	-
Cl.24 of IS 302-2-201: 2008(Component)	-	0	-
Cl.24 of IS 302-2-201: 2008(Component)	-	0	-
Cl.24 of IS 302-2-201: 2008(Component)	-	0	-
Cl.24 of IS 302-2-201: 2008(Component)	-	0	-
Cl.24 of IS 302-2-201: 2008(Component)	-	0	-
Cl.24 of IS 302-2-201: 2008(Component)	-	0	-
Cl.24 of IS 302-2-201: 2008(Component)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	500	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.26 of IS 302-2-201: 2008(Terminals for External Conductors)	-	500	-
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	500	-
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	0	-
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	0	-
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	0	-
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	0	-
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	0	-
Cl.28 of IS 302-2-201: 2008(Screws & Connections )	-	500	-
Cl.29 of IS 302-2‐201:2008(Clearances, Creepage Distances and Solid Insulation )	-	500	-
Cl.29 of IS 302-2‐201:2008(Clearances, Creepage Distances and Solid Insulation )	-	0	-
Cl.30 of IS 302-2‐201:2008(Resistance to Heat and Fire )	-	1000	-
Cl.30 of IS 302-2‐201:2008(Resistance to Heat and Fire )	-	0	-
Cl.31 of IS 302-2-201:2008(Resistance of Rusting )	-	500	-
Cl.32 of IS 302-2-201:2008(Radiation, Toxicity and Similar Hazards)	-	0	-
19.11.4.1(Electrostatic discharges)	-	0	-
19.11.4.2(Radiated fields)	-	0	-
19.11.4.3(Fast transient bursts)	-	0	-
19.11.4.4(Surge immunity test)	-	0	-
19.11.4.5(Immunity to conducted discharges)	-	0	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	0	-
19.11.4.7(Harmonics)	-	0	-
4(GENERAL REQUIREMENT)	-	0	-
5(GENERAL CONDITIONS FOR THE TESTS)	-	0	-

03 Dec, 2026

-
-

IS 302 : Part 2 : Sec 35 (2017)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 35 electric instantaneous water heaters (Second Revision)

Up to 250V for single phase and 480V for other.

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.32(Verification)	-	0	-
Cl.31(Verification)	-	0	-
Cl.30(Verification)	-	0	-
CL.29(Verification)	-	0	-
Cl.28(Verification)	-	0	-
Cl.27(Verification)	-	0	-
Cl.26(Verification)	-	0	-
Cl.25(Verification)	-	0	-
Cl.24(Verification)	-	0	-
Cl.23(Verification)	-	0	-
Cl.22(Verification)	-	0	-
Cl.21(Verification)	-	0	-
Cl.20(Verification)	-	0	-
Cl.19(Verification)	-	0	-
Cl.17(Verification)	-	0	-
Cl. 16(Verification)	-	0	-
Cl.15(Verification)	-	0	-
Cl.14(Verification)	-	0	-
Cl.13(Verification)	-	0	-
Cl.11(Verification)	-	0	-
Cl.10(Verification)	-	0	-
Cl.8(Verification)	-	0	-
Cl. 7(Verification)	-	0	-
Cl. 7(Verification)	-	0	-
Cl. 32 IS 302-2-35(Radiation, Toxicity and similar hazards)	-	0	-
Cl. 31 IS 302-2-35(Resistance to Rusting)	-	500	-
Cl. 30 IS 302-2-35(Resistance to Heat Fire & Tracking )	-	2000	-
Cl. 29 IS 302-2-35(Clearances, Creepage Distances & Solid insulation )	-	500	-
Cl. 28 IS 302-2-35(Screws & Connections)	-	500	-
Cl. 27 IS 302-2-35(Provision for Earthing )	-	500	-
Cl. 25 IS 302-2-35(Supply Connection & External Flexible Cords)	-	500	-
Cl. 26 IS 302-2-35(Terminals for External conductors )	-	500	-
Cl. 24 IS 302-2-35(Components)	-	500	-
Cl. 23 IS 302-2-35(Internal Wiring)	-	500	-
Cl. 22 IS 302-2-35(Construction )	-	1500	-
Cl. 21 IS 302-2-35(Mechanical strength)	-	1000	-
Cl. 20 IS 302-2-35(Stability & Mechanical Hazards)	-	500	-
Cl. 19 IS 302-2-35(Abnormal Operation )	-	1000	-
Cl. 18 IS 302-2-35(Endurance)	-	0	-
Cl. 17 IS 302-2-35(Overload Protection of Transformers and Associated Circuit)	-	0	-
Cl. 16 IS 302-2-35(Leakage Current & Electric Strength at Operating Temperature (After Humidity Treatment))	-	1000	-
Cl. 15 IS 302-2-35(Moisture Resistance Test )	-	1000	-
Cl. 14 IS 302-2-35(Radio and television interference suppression / Transient over voltages)	-	0	-
Cl. 11 IS 302-2-35(Heating)	-	1000	-
Cl. 13 IS 302-2-35(Leakage Current & Electric Strength at Operating Temperature)	-	1000	-
Cl. 10 IS 302-2-35(Power Input and Current )	-	500	-
Cl. 9 IS 302-2-35(Starting of motor operated appliances)	-	0	-
Cl. 8 IS 302-2-35(Protection against access to live parts)	-	500	-
Cl. 7 IS 302-2-35(Marking and Instruction)	-	500	-
Cl. 6 IS 302-2-35(Classification)	-	500	-
19.11.4.7(Harmonics)	-	0	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	0	-
19.11.4.5(Immunity to conducted discharges)	-	0	-
19.11.4.4(Surge immunity test)	-	0	-
19.11.4.3(Fast transient bursts)	-	0	-
19.11.4.2(Radiated fields)	-	0	-
19.11.4.1(Electrostatic discharges)	-	0	-
5(GENERAL CONDITIONS FOR THE TESTS)	-	0	-
4(GENERAL REQUIREMENT)	-	0	-

03 Dec, 2026

-
-

IS 302 : Part 2 : Sec 21 (2018)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 21 stationary storage type electric water heaters (Second Revision)

Up to 250Volt and others up to 480Volt

14000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
31.0(Resistance To Rusting)	-	500	-
30.0(Resistance To Heat and Fire)	-	1000	-
29.0(Creepage Distances and Clearances)	-	500	-
28.0(Screws and Connections)	-	500	-
27.0(Provision For Earthing)	-	1000	-
26.0(Terminals for external conductors)	-	500	-
25.0(Supply Connection and External Flexible Cords)	-	1000	-
23.0(Internal Wiring)	-	500	-
22.0(Construction)	-	1000	-
21.0(Mechanical Strength)	-	500	-
20.0(Stability and mechanical hazards)	-	500	-
19.0(Abnormal Operation)	-	1800	-
17.0(Overload Protection of transformer and associated circuit)	-	0	-
16.0(Leakage current and Electric strength (After Humidity (Environmental) Treatment))	-	1000	-
15.0(Moisture resistance)	-	1000	-
14.0(Transient Overvoltage)	-	0	-
13.0(Leakage Current and electric strength at operating temperature)	-	1000	-
11.0(Heating)	-	1500	-
10.0(Input and Current)	-	1000	-
8.0(Protection against access to live parts)	-	500	-
6.0(Classification)	-	500	-
7.0(Marking and Instructions)	-	500	-
24(Components)	-	0	-
19.11.4.7(Harmonics)	-	0	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	0	-
19.11.4.5(Immunity to conducted discharges)	-	0	-
19.11.4.4(Surge immunity test)	-	0	-
19.11.4.3(Fast transient bursts)	-	0	-
19.11.4.2(Radiated fields)	-	0	-
19.11.4.1(Electrostatic discharges)	-	0	-
4(GENERAL REQUIREMENTS)	-	0	-
5(GENERAL CONDITIONS FOR THE TESTS)	-	0	-
32(RADIATION TOXICITY AND SIMILAR HAZARDS)	-	0	-

03 Dec, 2026

-
-

IS 302 : Part 2 : Sec 201 (2008)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 201 electric immersion water heaters (First Revision)

upto 250V

8000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.6 of IS 302-‐2-‐201:2008(Classification)	-	500	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	600	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.8 of IS 302‐2-201: 2008(Protection Against Access to Live Parts)	-	800	-
Cl.10 of IS 302‐2‐201:2008(Power Input and Current )	-	1200	-
Cl.11 of IS 302-2201: 2008(Heating)	-	1100	-
Cl.11 of IS 302-2201: 2008(Heating)	-	0	-
Cl.11 of IS 302-2201: 2008(Heating)	-	0	-
Cl.11 of IS 302-2201: 2008(Heating)	-	0	-
Cl.11 of IS 302-2201: 2008(Heating)	-	0	-
Cl.11 of IS 302-2201: 2008(Heating)	-	0	-
Cl.11 of IS 302-2201: 2008(Heating)	-	0	-
Cl.11 of IS 302-2201: 2008(Heating)	-	0	-
Cl.11 of IS 302-2201: 2008(Heating)	-	0	-
Cl.11 of IS 302-2201: 2008(Heating)	-	0	-
Cl.11 of IS 302-2201: 2008(Heating)	-	0	-
Cl.13 of IS 302-2-201: 2008(Leakage Current & Electric Strength at Operating Temperature)	-	700	-
Cl.14 of IS 302‐2-201:2008(Transient Over Voltages )	-	900	-
Cl.15 of IS 302-2-201:2008(Moisture Resistance )	-	1200	-
Cl.16 of IS 302-2-201:2008(Leakage Current & Electric Strength)	-	1400	-
Cl.16 of IS 302-2-201:2008(Leakage Current & Electric Strength)	-	0	-
Cl.15 of IS 302-2-201:2008(Moisture Resistance )	-	0	-
Cl.17 of IS 302‐2-201: 2008(Overload Protection of Transformers & Associated Circuits)	-	700	-
Cl.19 of IS 302‐2-201: 2008(Abnormal Operation )	-	1500	-
Cl.19 of IS 302‐2-201: 2008(Abnormal Operation )	-	0	-
Cl.19 of IS 302‐2-201: 2008(Abnormal Operation )	-	0	-
Cl.19 of IS 302‐2-201: 2008(Abnormal Operation )	-	0	-
Cl.20 of IS 302-2-201: 2008(Stability & Mechanical Hazards)	-	500	-
Cl.21 of IS 302-2-201: 2008(Mechanical Strength )	-	400	-
Cl.21 of IS 302-2-201: 2008(Mechanical Strength )	-	0	-
Cl.21 of IS 302-2-201: 2008(Mechanical Strength )	-	0	-
Cl.22 of IS 302-2-201: 2008(Construction)	-	400	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	500	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	0	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	0	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	0	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	0	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	0	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	0	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	0	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	0	-
Cl.24 of IS 302-2-201: 2008(Component)	-	400	-
Cl.24 of IS 302-2-201: 2008(Component)	-	0	-
Cl.24 of IS 302-2-201: 2008(Component)	-	0	-
Cl.24 of IS 302-2-201: 2008(Component)	-	0	-
Cl.24 of IS 302-2-201: 2008(Component)	-	0	-
Cl.24 of IS 302-2-201: 2008(Component)	-	0	-
Cl.24 of IS 302-2-201: 2008(Component)	-	0	-
Cl.24 of IS 302-2-201: 2008(Component)	-	0	-
Cl.24 of IS 302-2-201: 2008(Component)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	600	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.26 of IS 302-2-201: 2008(Terminals for External Conductors)	-	400	-
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	600	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	0	-
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	0	-
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	0	-
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	0	-
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	0	-
Cl.28 of IS 302-2-201: 2008(Screws & Connections )	-	400	-
Cl.29 of IS 302-2‐201:2008(Clearances, Creepage Distances and Solid Insulation )	-	400	-
Cl.30 of IS 302-2‐201:2008(Resistance to Heat and Fire )	-	1200	-
Cl.31 of IS 302-2-201:2008(Resistance of Rusting )	-	700	-
Cl.32 of IS 302-2-201:2008(Radiation, Toxicity and Similar Hazards)	-	1000	-
19.11.4.7(Harmonics)	-	500	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	500	-
19.11.4.5(Immunity to conducted discharges)	-	500	-
19.11.4.4(Surge immunity test)	-	1500	-
19.11.4.3(Fast transient bursts)	-	500	-
19.11.4.2(Radiated fields)	-	0	-
19.11.4.1(Electrostatic discharges)	-	0	-
4(GENERAL REQUIREMENTS)	-	0	-
5(GENERAL CONDITIONS FOR THE TESTS)	-	0	-

03 Dec, 2026

-
-

IS 302 : Part 2 : Sec 15 (2009)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 15 appliances for heating liquids (First Revision)

Up to 250 Volt

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.0(Classification)	-	500	-
7(Marking and instructions)	-	500	-
8(Protection against live parts)	-	500	-
9(STARTING OF MOTOR-OPERATED APPLIANCES)	-	0	-
10(POWER INPUT AND CURRENT)	-	1000	-
11(HEATING)	-	1000	-
13(LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE)	-	1500	-
14(TRANSIENT OVERVOLTAGES)	-	0	-
15(MOISTURE RESISTANCE)	-	1500	-
16(LEAKAGE CURRENT AND ELECTRIC STRENGTH)	-	1000	-
17(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	500	-
18(ENDURANCE)	-	0	-
19(ABNORMAL OPERATION)	-	1000	-
20(STABILITY AND MECHANICAL HAZARDS)	-	500	-
21(MECHANICAL STRENGTH)	-	500	-
22(CONSTRUCTION)	-	1450	-
23(INTERNAL WIRING)	-	500	-
24(COMPONENTS)	-	500	-
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CORDS)	-	1000	-
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	500	-
27(PROVISION FOR EARTHING)	-	1000	-
28(SCREWS AND CONNECTIONS)	-	500	-
29(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION)	-	500	-
30(RESISTANCE TO HEAT AND FIRE)	-	1500	-
31(RESISTANCE TO RUSTING)	-	500	-
32(RADIATION, TOXICITY AND SIMILAR HAZARDS)	-	0	-
22.16(Automatic cord reel)	-	0	-
22.47(Water pressure inlet)	-	0	-
22.32(Oxygen bomb for rubber material)	-	0	-
22.106(Interlocks)	-	0	-
22.3(Flexing test)	-	0	-
24(Components)	-	0	-
19.11.4.1(Electrostatic discharges)	-	0	-
19.11.4.2(Radiated fields)	-	0	-
19.11.4.3(Fast transient bursts)	-	0	-
19.11.4.4(Surge immunity test)	-	0	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	0	-
19.11.4.7(Harmonics)	-	0	-
4(General requirements)	-	0	-
5(General Conditions of tests)	-	0	-

03 Dec, 2026

-
-

IS 302 : Part 2 : Sec 6 (2009)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 6 cooking ranges, hobs, ovens and similar appliances (First Revision)

Up to 250 Volt for single phase and 480V for others

14000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.0(Classification)	-	500	-
7.0(Marking and instructions)	-	500	-
8.0(Protection against access to live part test)	-	1000	-
9.0(Starting of motor-operated appliances test)	-	0	-
10.0(Power Input and current test)	-	1000	-
11.0(Heating test)	-	1500	-
13.0(Leakage current and electric strength test)	-	1000	-
14.0(Transient voltages)	-	500	-
15.0(Moisture Resistance)	-	1000	-
16.0(Leakage current and electric strength test)	-	1000	-
17.0(Overload protection of transformers test)	-	0	-
18.0(Endurance test)	-	0	-
19.0(Abnormal Operations)	-	2000	-
20.0(Stability and Mechanical Hazards)	-	500	-
21.0(Mechanical Strength)	-	500	-
22.0(Construction verification related tests)	-	500	-
23.0(Internal wiring)	-	500	-
24.0(Components)	-	1000	-
25.0(Supply connections and External Flexible Cords)	-	1000	-
26.0(Terminal for External Conductors)	-	500	-
27.0(Provision for Earthing)	-	1000	-
28.0(Screws and connections)	-	1000	-
29.0(Clearances and Creepage distances and solid insulation)	-	1000	-
30.0(Resistance to heat and fire)	-	1000	-
31.0(Resistance to rusting)	-	1000	-
32.0(Radiation, Toxicity and Similar hazards)	-	0	-
19.11.4.1(Electrostatic discharges)	-	0	-
19.11.4.2(Radiated fields)	-	0	-
19.11.4.3(Fast transient bursts)	-	0	-
19.11.4.4(Surge immunity test)	-	0	-
19.11.4.5(Immunity to conducted discharges)	-	0	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	0	-
19.11.4.7(Harmonics)	-	0	-
4(General Requirements)	-	0	-
5(General condition for the tests)	-	0	-

03 Dec, 2026

-
-

IS 4250 (2025)

Electric Food-Mixers (Liquidizers and Grinders) and Centrifugal Juicers ï¿½ Specification ( Second Revision )

30000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4(General Requirements)	-	1000	-
Cl-5(General Conditions for the tests)	-	1000	-
Cl-6(Classification)	-	1000	-
Cl-7(Marking)	-	1000	-
Cl-8(Safety Requirements)	-	1000	-
Cl-9(Endurance fpr motor and base assembly)	-	10000	-
Cl-10.2("Grinding Coffee (for Machines that Have a Dry Grinding Arrangement)")	-	2000	-
Cl-10.3(Whisking Egg Whites (for Machines that have Whisking Egg Arrangement))	-	2000	-
Cl-10.4(Idli Batter)	-	2000	-
Cl-10.5(Operational Tests for Juicers)	-	2000	-
Cl-11(Temperature Withstand Test for Bowl)	-	3000	-
Cl-12.1(Test for Switches)	-	1000	-
Cl-13(Strength of Assembly)	-	1000	-
Cl-14.2, 14.3 Table-2 (i)(Protection against access to live parts)	-	1000	-
Cl-14.2, Table-2 (ii)(Power input and current)	-	2000	-
Cl-14.2, 14.3 Table-2 (iii)(Leakage current and electric strength at operating temperature)	-	1000	-
Cl-14.2, Table-2 (iv)(Moisture resistance)	-	6000	-
Cl-14.2, Table-2 (v)(Leakage current and electric strength)	-	1000	-
Cl-14.2, 14.3 Table-2 (vi)(Provision for earthing)	-	1000	-

03 Dec, 2026

-
-

IS 302 : Part 2 : Sec 8 (2024)

Household and Similar Electrical Appliances âSafety Part 2 Particular Requirements Section 8 Shavers, Hair Clippers and Similar Appliances (First Revision)

24000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking and instructions)	-	1000	-
8(Protection against access to live parts)	-	2000	-
10(Power input and current)	-	4000	-
11(Heating)	-	3000	-
12(Charging of metal-ion batteries)	-	1000	-
13.1 &13.2(Leakage current test)	-	1000	-
13.1 &13.3(Electric strength test)	-	1000	-
14(Transient overvoltages)	-	1000	-
15(Moisture resistance)	-	5000	-
15.3(Moisture resistance)	-	1000	-
16.1 &16.2(Leakage current test)	-	1000	-
16.1 & 16.3(Electric strength test)	-	1000	-
17(Overload protection of transformers and associated circuits)	-	1000	-
19.1 to 19.13, Table No. - 9(Abnormal operation)	-	3000	-
19.101(Abnormal operation)	-	1000	-
20.1(Stability and mechanical hazards)	-	1000	-
20.2(Stability and mechanical hazards)	-	1000	-
21(Mechanical strength)	-	1000	-
21.101(Mechanical strength)	-	1000	-
21.102(Mechanical strength)	-	1000	-
21.103(Mechanical strength)	-	1000	-
22(Construction)	-	1000	-
22.101(Construction)	-	1000	-
22.102(Construction)	-	1000	-
22.103(Construction)	-	1000	-
23(Internal wiring)	-	1000	-
24(Components)	-	1000	-
25("Supply connection and external flexible cords")	-	1000	-
26("Terminals for external conductors")	-	1000	-
27(Provision for earthing)	-	1000	-
28(Screws and connections)	-	1000	-
29("Clearances, creepage distances and solid insulation")	-	1000	-
30(Resistance to heat and fire)	-	1000	-
31(Resistance to rusting)	-	1000	-
32("Radiation, toxicity and similar hazards")	-	1000	-

03 Dec, 2026

-
Exclusion: Cl 19.11.4.1- 19.11.4.7(EMI/EMC)

IS 302 : Part 2 : Sec 32 (1994)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 32 massage appliances

38000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
(CI. 6 IS 302-2-32 : 1994(Classification )	-	1000	-
Cl. 7 302-2-32 : 1994(Marking)	-	1000	-
Cl. 8 302-2-32 : 1994(Starting of motor operated appliances)	-	1000	-
Cl. 9 302-2-32 : 1994(Protection Against Electric Shock)	-	2000	-
Cl. 10 302-2-32 : 1994(Power Input and Current )	-	4000	-
Cl. 11 302-2-32 : 1994(Temperature Rise)	-	2000	-
Cl. 13 302-2-32 : 1994(Leakage Current & Electric Strength at Operating Temperature)	-	2000	-
Cl. 14 302-2-32 : 1994(Radio and television interference suppression / Transient over voltages)	-	1000	-
Cl. 15 302-2-32: 1994(Moisture Resistance Test )	-	5000	-
Cl. 16 302-2-32 : 1994(Leakage Current & Electric Strength at Operating Temperature (After Humidity Treatment))	-	2000	-
Cl. 17 302-2-32 : 1994(Overload Protection of Transformers and Associated Circuit)	-	2000	-
Cl. 18 302-2-32 : 1994(Endurance)	-	2000	-
Cl. 19 302-2-32 : 1994(Abnormal Operation )	-	3000	-
Cl. 20 302-2-32 : 1994(Stability & Mechanical Hazards)	-	2000	-
Cl. 21 302-2-32 : 1994(Mechanical strength)	-	2000	-
Cl. 22 302-2-32 : 1994(Construction )	-	2000	-
Cl. 23 302-2-32 : 1994(Internal Wiring)	-	2000	-
Cl. 24 302-2-32 : 1994(Components)	-	2000	-
Cl. 25 302-2-32 : 1994(Supply Connection & External Flexible Cords)	-	2000	-
Cl. 26 302-2-32 : 1994(Terminals for External conductors )	-	2000	-
Cl. 27 302-2-32 : 1994(Provision for Earthing )	-	1000	-
Cl. 28 302-2-32 : 1994(Screws & Connections)	-	1000	-
Cl. 29 302-2-32 : 1994(Clearances, Creepage Distances & Solid insulation )	-	1000	-
Cl. 30 302-2-32 : 1994(Resistance to Heat Fire & Tracking )	-	2000	-
Cl. 31 302-2-32 : 1994(Resistance to Rusting)	-	2000	-
Cl. 32 302-2-32 : 1994(Radiation Hazards)	-	1000	-

03 Dec, 2026

-
Exclusion: Cl 19.11.4.1-19.11.4.7 (EMI/EMC)

IS 302 : Part 2 : Sec 2 (1997)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 2 vacuum cleaners and water suction cleaning appliances

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Rating)	-	1000	-
6(Classification)	-	1000	-
7(Marking)	-	1000	-
8(Protection against Access to Live Parts)	-	1000	-
9(Starting Of Motor Operated Appliances)	-	1000	-
10("Power Input & Current")	-	3000	-
11(Temperature Rise/ Heating)	-	2000	-
12(OPERATION UNDER OVERLOAD CONDITIONS OF APPLIANCES WITH HEATING ELEMENTS)	-	1000	-
13(LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE)	-	1000	-
14(RADIO AND TELEVISION INTERFERENCE SUPPRESSION)	-	500	-
15(MOISTURE RESISTANCE)	-	2000	-
16(INSULATION RESISTANCE AND ELECTRIC STRENGTH ( AFTER HUMIDITY TREATMENT ))	-	1000	-
17(OVERLOAD PROTECTION)	-	1000	-
19(ABNORMAL OPERATION)	-	1000	-
20(STABILITY AND MECHANICAL HAZARDS)	-	1000	-
21(MECHANICAL STRENGTH)	-	1000	-
22(Construction)	-	1000	-
23(INTERNAL WIRING)	-	1000	-
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CABLES AND CORDS)	-	1000	-
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	1000	-
27(PROVISION FOR EARTHING)	-	1000	-
28(SCREWS AND CONNECTIONS)	-	1000	-
29(CREEPAGE DISTANCES, CLEARANCES AND DISTANCES THROUGH INSULATION)	-	1000	-
30(RESISTANCE TO HEAT, FIRE AND TRACKING)	-	1000	-
31(RESISTANCE TO RUSTING)	-	1000	-
32(RADIATION HAZARDS)	-	500	-
24(COMPONENTS)	-	1000	-

03 Dec, 2026

-
Exclusion: Cl 19.11.4.1-19.11.4.7 (EMI/EMC)

IS 302 : Part 2 : SEC 31 (2009)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 31 range hoods

24000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause No - 5(GENERAL CONDITIONS FOR THE TESTS)	-	1000	-
Clause No - 5.18(linear and angular dimension)	-	1000	-
Clause No - 6.2(harmfull ingress of water)	-	1000	-
Clause No - 8.1.1("PROTECTION AGAINST ACCESS TO LIVE PART- test probe B")	-	1000	-
Clause No - 8.1.2("PROTECTION AGAINST ACCESS TO LIVE PART - test probe 13")	-	1000	-
Clause No - 8.2(Addition)	-	1000	-
Clause No - 10.1, Table No. -1(power input deviation)	-	3000	-
Clause No - 13.3("LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE")	-	1000	-
Clause No - 13.3,Table No.- 4(voltage for electrical strength)	-	1000	-
Clause No - 14(Impulse test voltage)	-	2000	-
Clause No - 15.1.1(MOISTURE RESISTANCE)	-	3000	-
Clause No -19.7(test is repeated with the capacitor short circuited)	-	1000	-
Clause No -21.1(Mechanical strength)	-	1000	-
Clause No -22.1(construction)	-	1000	-
Clause No -22.11(push force applied)	-	500	-
Clause No -24.1.2(safety isolating transformer)	-	500	-
Clause No -24.1.3(for switches)	-	1000	-
Clause No -24.1.4(for automatic control)	-	1000	-
Clause No -24.1.5(for innterconnection couplers)	-	1000	-
Clause No -24.4(plug and socket)	-	1000	-
Clause No -25.8, Table no -11(conductor resistance)	-	1000	-
Clause No -25.5(dimension for pins)	-	1000	-
Clause No -27.6(for circuit board)	-	1000	-
Clause No -29.2(comparative tracking index)	-	1000	-
Clause No -29.3.3(dry heat test)	-	1000	-
Clause No -30.2.1(glow wire test)	-	1000	-
Clause No -30.101("incorporate combustible material")	-	1000	-
15(MOISTURE RESISTANCE)	-	1000	-
16(LEAKAGE CURRENT AND ELECTRIC STRENGTH)	-	1000	-
17(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	1000	-
18(ENDURANCE)	-	500	-
28(SCREWS AND CONNECTIONS)	-	500	-
31(RESISTANCE TO RUSTING)	-	500	-
32(RADIATION, TOXICITY AND SIMILAR HAZARDS)	-	500	-
11(Heating)	-	2000	-
22(CONSTRUCTION)	-	1000	-
24(COMPONENTS)	-	1000	-

03 Dec, 2026

-
Exclusion: Cl 19.11.4.1-19.11.4.7 (EMI/EMC)

IS 302 : Part 2 : Sec 75 (2018)

Safety of Household and Similar Electrical Appliances Part 2 Particular Requirements Section 75 Commercial Dispensing Appliances and Vending Machines

28000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
32(Radiation, toxicity and similar hazards)	-	1000	-
31(Resistance to rusting)	-	1000	-
30.2.4(Resistance to heat and fire)	-	1000	-
30.2(Resistance to heat and fire)	-	1000	-
30.1(Resistance to heat and fire)	-	1000	-
29.3(Clearances, creepage distances and solid insulation)	-	1000	-
29.2(Clearances, creepage distances and solid insulation)	-	1000	-
29.2(Clearances, creepage distances and solid insulation)	-	1000	-
29.1, Table No.- 16, Table No.- 17 & Table No.18(Clearances, creepage distances and solid insulation)	-	1000	-
29.1, Table No.- 16, Table No.- 17 & Table No.18(Clearances, creepage distances and solid insulation)	-	1000	-
28.2 to 28.4(Screws and connections)	-	1000	-
28.1, Table No.-14(Screws and connections)	-	1000	-
27.6(Provision for earthing)	-	1000	-
27.5(Provision for earthing)	-	1000	-
27.1 to 27.4(Provision for earthing)	-	1000	-
26.10 & 26.11(Terminals for external conductors)	-	1000	-
26.9(Terminals for external conductors)	-	1000	-
26.1 to 26.8(Terminals for external conductors)	-	1000	-
25.16 to 25.25(Supply connection and external flexible cords)	-	1000	-
25.15(Supply connection and external flexible cords)	-	1000	-
25.14(Supply connection and external flexible cords)	-	1000	-
25.9 to 25.13(Supply connection and external flexible cords)	-	1000	-
25.8, Table No.-11(Supply connection and external flexible cords)	-	1000	-
25.5 to 25.7(Supply connection and external flexible cords)	-	1000	-
25.4(Supply connection and external flexible cords)	-	1000	-
25.3(Supply connection and external flexible cords)	-	1000	-
25.2(Supply connection and external flexible cords)	-	1000	-
25.1(Supply connection and external flexible cords)	-	1000	-
24.101 to 24.103(Components)	-	1000	-
24.2 to 24.6(Components)	-	1000	-
24.1(Components)	-	1000	-
23.101 to 23.102(Internal wiring)	-	1000	-
23.6 to 23.10(Internal wiring)	-	1000	-
23.5(Internal wiring)	-	1000	-
23.4(Internal wiring)	-	1000	-
23.3(Internal wiring)	-	1000	-
23.1 & 23.2(Internal wiring)	-	1000	-
22.101 to 22.114(Constructions)	-	1000	-
22.13 to 22.48(Constructions)	-	1000	-
22.12(Constructions)	-	1000	-
22.11(Constructions)	-	1000	-
22.11(Constructions)	-	1000	-
22.7 to 22.10(Constructions)	-	1000	-
22.6(Constructions)	-	1000	-
22.5(Constructions)	-	1000	-
22.4(Constructions)	-	1000	-
22.3(Constructions)	-	1000	-
22.2(Constructions)	-	1000	-
22.1(Constructions)	-	1000	-
21.2(MECHANICAL STRENGTH)	-	1000	-
21.1(MECHANICAL STRENGTH)	-	1000	-
20.2(Stability and mechanical hazards)	-	1000	-
20.1(Stability and mechanical hazards)	-	1000	-
19.101 and 19.102(ABNORMAL OPERATION)	-	1000	-
19.1 to 19.13, Table No. - 9(ABNORMAL OPERATION)	-	1000	-
17(Overload protection of transformers and associated circuits)	-	1000	-
16.3(Insulation resistance test)	-	1000	-
16.3(Electric strength test)	-	1000	-
16.1 & 16.2(Leakage current test)	-	1000	-
15.102(Moisture resistance)	-	1000	-
15.102(Moisture resistance)	-	1000	-
15.101(Moisture resistance)	-	1000	-
15.3(Moisture resistance)	-	1000	-
15.2(Moisture resistance)	-	1000	-
15.1(Moisture resistance)	-	1000	-
14, Table No.- 6 & Table No.-16(Transient over voltages)	-	1000	-
13.3 and Table No.- 4(Electric strength test)	-	1000	-
13.1, 13.2(Leakage current test)	-	1000	-
11.1 to 11.8, Table No.-3(Heating)	-	1000	-
10.1 & 10.2 -Table No. 1, Table No. 2(Power Input and Current)	-	1000	-
8.1.5(Protection against access to live parts)	-	1000	-
8.1.4(Protection against access to live parts)	-	1000	-
8.1.3(Protection against access to live parts)	-	1000	-
8.1.2(Protection against access to live parts)	-	1000	-
8.1, 8.1.1 & 8.2(Protection against access to live parts)	-	1000	-
7.14(Legibility & Durability of Markings test)	-	1000	-
7.1 to 7.13, 7.15, 7.16(Marking)	-	1000	-
32(Radiation, toxicity and similar hazards)	-	1000	-
31(Resistance to rusting)	-	1000	-
30.2.4(Resistance to heat and fire)	-	1000	-
30.2(Resistance to heat and fire)	-	1000	-
30.1(Resistance to heat and fire)	-	1000	-
29.3(Clearances, creepage distances and solid insulation)	-	1000	-
29.2(Clearances, creepage distances and solid insulation)	-	1000	-
29.2(Clearances, creepage distances and solid insulation)	-	1000	-
29.1, Table No.- 16, Table No.- 17 & Table No.18(Clearances, creepage distances and solid insulation)	-	1000	-
29.1, Table No.- 16, Table No.- 17 & Table No.18(Clearances, creepage distances and solid insulation)	-	1000	-
28.2 to 28.4(Screws and connections)	-	1000	-
28.1, Table No.-14(Screws and connections)	-	1000	-
27.6(Provision for earthing)	-	1000	-
27.5(Provision for earthing)	-	1000	-
27.1 to 27.4(Provision for earthing)	-	1000	-
26.10 & 26.11(Terminals for external conductors)	-	1000	-
26.9(Terminals for external conductors)	-	1000	-
26.1 to 26.8(Terminals for external conductors)	-	1000	-
25.16 to 25.25(Supply connection and external flexible cords)	-	1000	-
25.14(Supply connection and external flexible cords)	-	1000	-
25.9 to 25.13(Supply connection and external flexible cords)	-	1000	-
25.8, Table No.-11(Supply connection and external flexible cords)	-	1000	-
25.5 to 25.7(Supply connection and external flexible cords)	-	1000	-
25.4(Supply connection and external flexible cords)	-	1000	-
25.3(Supply connection and external flexible cords)	-	1000	-
25.2(Supply connection and external flexible cords)	-	1000	-
25.1(Supply connection and external flexible cords)	-	1000	-
24.101 to 24.103(Components)	-	1000	-
24.2 to 24.6(Components)	-	1000	-
24.1(Components)	-	1000	-
23.101 to 23.102(Internal wiring)	-	1000	-
23.6 to 23.10(Internal wiring)	-	1000	-
23.5(Internal wiring)	-	1000	-
23.4(Internal wiring)	-	1000	-
23.3(Internal wiring)	-	1000	-
23.1 & 23.2(Internal wiring)	-	1000	-
22.101 to 22.114(Constructions)	-	1000	-
22.13 to 22.48(Constructions)	-	1000	-
22.12(Constructions)	-	1000	-
22.11(Constructions)	-	1000	-
22.11(Constructions)	-	1000	-
22.7 to 22.10(Constructions)	-	1000	-
22.6(Constructions)	-	1000	-
22.5(Constructions)	-	1000	-
22.4(Constructions)	-	1000	-
22.3(Constructions)	-	1000	-
22.2(Constructions)	-	1000	-
22.1(Constructions)	-	1000	-
21.2(MECHANICAL STRENGTH)	-	1000	-
21.1(MECHANICAL STRENGTH)	-	1000	-
20.2(Stability and mechanical hazards)	-	1000	-
20.1(Stability and mechanical hazards)	-	1000	-
19.101 and 19.102(ABNORMAL OPERATION)	-	1000	-
19.1 to 19.13, Table No. - 9(ABNORMAL OPERATION)	-	1000	-
17(Overload protection of transformers and associated circuits)	-	1000	-
16.3(Insulation resistance test)	-	1000	-
16.3(Electric strength test)	-	1000	-
16.1 & 16.2(Leakage current test)	-	1000	-
15.102(Moisture resistance)	-	1000	-
15.102(Moisture resistance)	-	1000	-
15.101(Moisture resistance)	-	1000	-
15.3(Moisture resistance)	-	1000	-
15.2(Moisture resistance)	-	1000	-
15.1(Moisture resistance)	-	1000	-
14, Table No.- 6 & Table No.-16(Transient over voltages)	-	1000	-
13.3 and Table No.- 4(Electric strength test)	-	1000	-
13.1, 13.2(Leakage current test)	-	1000	-
11.1 to 11.8, Table No.-3(Heating)	-	1000	-
10.1 & 10.2 -Table No. 1, Table No. 2(Power Input and Current)	-	1000	-
8.1.5(Protection against access to live parts)	-	1000	-
8.1.4(Protection against access to live parts)	-	1000	-
8.1.3(Protection against access to live parts)	-	1000	-
8.1.2(Protection against access to live parts)	-	1000	-
8.1, 8.1.1 & 8.2(Protection against access to live parts)	-	1000	-
7.14(Legibility & Durability of Markings test)	-	1000	-
7.1 to 7.13, 7.15, 7.16(Marking)	-	1000	-
25.15(Supply connection and external flexible cords)	-	1000	-

03 Dec, 2026

-
Exclusion: Cl 19.11.4.1-19.11.4.7 (EMI/EMC)

IS 302 : Part 2 : Sec 202 (1992)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 202 electric stoves

14000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Classification- IS 302-1 )	-	1000	-
6(Classification- IS 302-1)	-	1000	-
7.1(Marking- IS 302-1)	-	1000	-
7.1(Marking- IS 302-1)	-	1000	-
7.1(Marking- IS 302-1)	-	1000	-
7.1(Marking- IS 302-1)	-	1000	-
7.1(Marking- IS 302-1)	-	1000	-
7.1(Marking- IS 302-1)	-	1000	-
7.1(Marking- IS 302-1)	-	1000	-
7.1(Marking- IS 302-1)	-	1000	-
7.1(Marking- IS 302-1)	-	1000	-
7.3(Marking- IS 302-1)	-	1000	-
7.4(Marking- IS 302-1)	-	1000	-
7.6(Marking- IS 302-1)	-	1000	-
7.11(Marking- IS 302-1)	-	1000	-
7.12(Marking- IS 302-1)	-	1000	-
7.13(Marking- IS 302-1)	-	1000	-
7.14(Marking- IS 302-1)	-	1000	-
7.15(Marking- IS 302-1)	-	1000	-
7.101(Marking)	-	1000	-
8( Protection Against Electric Shock, IS 302-1)	-	1000	-
10(Power Input and Current, IS 302-1)	-	1000	-
11(Heating, IS 302-1)	-	1000	-
11(Heating, IS 302-1)	-	1000	-
11(Heating, IS 302-1)	-	1000	-
11(Heating, IS 302-1)	-	1000	-
11(Heating, IS 302-1)	-	1000	-
11(Heating, IS 302-1)	-	1000	-
11(Heating, IS 302-1)	-	1000	-
12(Operation under overload conditions of appliances with heating elements, IS 302-2-202: 1992)	-	1000	-
13(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	1000	-
13(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	1000	-
15.1(Moisture Resistance, IS 302-1)	-	1000	-
15.3(Moisture Resistance, IS 302-1)	-	1000	-
16(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	1000	-
16(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	1000	-
19.2(Abnormal Operation, IS 302-1)	-	1000	-
19.2(Abnormal Operation, IS 302-1)	-	1000	-
19.3(Abnormal Operation, IS 302-1)	-	1000	-
19.3(Abnormal Operation, IS 302-1)	-	1000	-
20.1(Stability & Mechanical Hazards, IS 302-1)	-	1000	-
21.1(Mechanical Strength, IS 302-1 & IS 302-2-202)	-	1000	-
22(Construction, IS 302-1)	-	1000	-
22.101(Construction)	-	1000	-
22.102(Construction)	-	1000	-
22.103(Construction)	-	1000	-
22.104(Construction)	-	1000	-
22.105(Construction)	-	1000	-
22.105.1(Construction)	-	1000	-
22.105.2(Construction)	-	1000	-
22.106(Construction)	-	1000	-
11.107.1(Construction)	-	1000	-
23.1(Internal Wiring, IS 302-1)	-	1000	-
23.2(Internal Wiring, IS 302-1)	-	1000	-
23.8(Internal Wiring, IS 302-1)	-	1000	-
23.9(Internal Wiring, IS 302-1)	-	1000	-
23.10(Internal Wiring, IS 302-1)	-	1000	-
24.1(Components, IS 302-1)	-	1000	-
24.2(Components, IS 302-1)	-	1000	-
24.101(Components)	-	1000	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.4(Supply Connection and External Flexible Cords)	-	1000	-
25.5(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.6(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
26.9(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.11(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.12(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.16(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.17(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.18(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.19(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.2(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.21(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.22(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
26(Terminals for External Conductors, IS 302-1)	-	1000	-
27.1(Provision for Earthing, IS 302-1)	-	1000	-
27.2(Provision for Earthing, IS 302-1)	-	1000	-
27.3(Provision for Earthing, IS 302-1)	-	1000	-
27.4(Provision for Earthing, IS 302-1)	-	1000	-
27.5(Provision for Earthing, IS 302-1)	-	1000	-
28(Screws & Connections, IS 302-1)	-	1000	-
29.1(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	1000	-
29.2(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	1000	-
30.1(Resistance to Heat, Fire & Tracking, IS 302-1)	-	1000	-
30.2(Resistance to Heat, Fire & Tracking, IS 302-1)	-	1000	-
31(Resistance of Rusting, IS 302-1)	-	1000	-
22.107(Construction)	-	1000	-

03 Dec, 2026

-
Exclusion: Cl 19.11.4.1-19.11.4.7 (EMI/EMC)

1
2
3
Next
Last

Bureau of Indian Standards

The National Standards Body of India

HT Product Services Private Limited, Noida

B-78 (Basement, First, Fourth and Fifth Floor) Sector-5, Noida, Noida, Gautam Buddha Nagar, Uttar Pradesh, 201301

9899994387 info@houseoftesting.com

Scope List