BIS - LIMS (Laboratory Information Management System)

HT Product Services Private Limited, Noida

B-78 (Basement, First, Fourth and Fifth Floor) Sector-5, Noida, Noida, Gautam Buddha Nagar, Uttar Pradesh, 201301

9899994387 info@houseoftesting.com

Scope List

Reset

62 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

IS 302 : Part 2 : Sec 9 (2009)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 9 toasters, grills, roasters and similar appliances (First Revision)

Upto 250 V

14200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.32(Verification)	-	0	-
Cl.31(Verification)	-	0	-
Cl.30(Verification)	-	0	-
CL.29(Verification)	-	0	-
Cl.28(Verification)	-	0	-
Cl.27(Verification)	-	0	-
Cl.26(Verification)	-	0	-
Cl.25(Verification)	-	0	-
Cl.24(Verification)	-	0	-
Cl.23(Verification)	-	0	-
Cl.22(Verification)	-	0	-
Cl.21(Verification)	-	0	-
Cl.20(Verification)	-	0	-
Cl.19(Verification)	-	0	-
Cl. 16(Verification)	-	0	-
Cl.15.1(Moisture Resistance)	-	0	-
Cl.14(Verification)	-	0	-
Cl.13(Verification)	-	0	-
Cl.11(Verification)	-	0	-
Cl.10(Verification)	-	0	-
Cl.8(Verification)	-	0	-
Cl. 7(Verification)	-	0	-
Cl. 6(Classification- IS 302-1)	-	0	-
Cl. 32 IS 302-2-9(Radiation, Toxicity and similar hazards)	-	0	-
Cl. 31 IS 302-2-9(Resistance To Rusting )	-	500	-
Cl. 30 IS 302-2-9(Resistance To Heat, Fire And Tracking)	-	1200	-
Cl. 29 IS 302-2-9(Creepage Distances, Clearances And Distances Through Insulation)	-	500	-
Cl. 28 IS 302-2-9(Screws and Connections)	-	500	-
Cl. 27 IS 302-2-9(Provision For Earthing )	-	500	-
Cl. 26 IS 302-2-9(Terminal For External Conductors )	-	500	-
Cl. 25 IS 302-2-9(Supply Connections and External Flexible Cables and Cords )	-	1000	-
Cl. 24 IS 302-2-9(Components)	-	500	-
Cl. 23 IS 302-2-9(Internal Wiring)	-	500	-
Cl. 22 IS 302-2-9(Construction )	-	1500	-
Cl. 21 IS 302-2-9(Mechanical Strength)	-	500	-
Cl. 20 IS 302-2-9(Stability and mechanical Hazards)	-	500	-
Cl. 19 IS 302-2-9(Abnormal Operation )	-	500	-
Cl. 18 IS 302-2-9(Endurance)	-	0	-
Cl. 17 IS 302-2-9(Overload protection of transformers and associated circuits.)	-	0	-
Cl. 16 IS 302-2-9(Leakage Current and Electric strength )	-	1000	-
Cl. 15 IS 302-2-9(Moisture Resistance)	-	500	-
Cl. 14 IS 302-2-9(Transient overvoltage)	-	0	-
Cl. 13.3 IS 302-2-9(Leakage Current & Electric Strength at Operating Temperature)	-	1000	-
Cl. 11 IS 302-2-9(Heating)	-	1000	-
Cl. 10 IS 302-2-9(Power Input and Current )	-	500	-
Cl. 9 IS 302-2-9(Starting of motor operated appliances)	-	0	-
Cl. 8 IS 302-2-9(Protection against access to live parts)	-	500	-
Cl. 7 IS 302-2-9(Marking and Instruction)	-	500	-
Cl. 6 IS 302-2-9(Classification- IS 302-1)	-	500	-
32(Radiation, toxicity and similar hazards)	-	0	-
31(Resistance to rusting)	-	0	-
31(Resistance to rusting)	-	0	-
30.2.4(Resistance to heat and fire)	-	0	-
30.2(Resistance to heat and fire)	-	0	-
30.1(Resistance to heat and fire)	-	0	-
29.3(Clearances, creepage distances and solid insulation)	-	0	-
29.2(Clearances, creepage distances and solid insulation)	-	0	-
29.2(Clearances, creepage distances and solid insulation)	-	0	-
29.1, Table No.- 16, Table No.- 17 & Table No.18(Clearances, creepage distances and solid insulation)	-	0	-
29.1, Table No.- 16, Table No.- 17 & Table No.18(Clearances, creepage distances and solid insulation)	-	0	-
28.2 to 28.4(Screws and connections)	-	0	-
28.1, Table No.-14(Screws and connections)	-	0	-
27.6(Provision for earthing)	-	0	-
27.5(Provision for earthing)	-	0	-
27.1 to 27.4(Provision for earthing)	-	0	-
26.10 & 26.11(Terminals for external conductors)	-	0	-
26.9(Terminals for external conductors)	-	0	-
26.1 to 26.8(Terminals for external conductors)	-	0	-
25.16 to 25.25(Supply connection and external flexible cords)	-	0	-
25.15(Supply connection and external flexible cords)	-	0	-
25.14(Supply connection and external flexible cords)	-	0	-
25.14(Supply connection and external flexible cords)	-	0	-
25.9 to 25.13(Supply connection and external flexible cords)	-	0	-
25.8, Table No.-11(Supply connection and external flexible cords)	-	0	-
25.5 to 25.7(Supply connection and external flexible cords)	-	0	-
25.4(Supply connection and external flexible cords)	-	0	-
25.3(Supply connection and external flexible cords)	-	0	-
25.2(Supply connection and external flexible cords)	-	0	-
25.1(Supply connection and external flexible cords)	-	0	-
24.101(Components)	-	0	-
24.101(Components)	-	0	-
24.2 to 24.6(Components)	-	0	-
24.1(Components)	-	0	-
23.6 to 23.10(Internal wiring)	-	0	-
23.5(Internal wiring)	-	0	-
23.4(Internal wiring)	-	0	-
23.3(Internal wiring)	-	0	-
23.1 & 23.2(Internal wiring)	-	0	-
22.111(Constructions)	-	0	-
22.111(Constructions)	-	0	-
22.11o(Constructions)	-	0	-
22.109(Constructions)	-	0	-
22.108(Constructions)	-	0	-
22.101 to 22.107(Constructions)	-	0	-
22.13 to 22.48(Constructions)	-	0	-
22.12(Constructions)	-	0	-
22.11(Constructions)	-	0	-
22.11(Constructions)	-	0	-
22.7 to 22.10(Constructions)	-	0	-
22.6(Constructions)	-	0	-
22.5(Constructions)	-	0	-
22.4(Constructions)	-	0	-
22.3(Constructions)	-	0	-
22.2(Constructions)	-	0	-
22.1(Constructions)	-	0	-
21.101(MECHANICAL STRENGTH)	-	0	-
21.101(MECHANICAL STRENGTH)	-	0	-
21.2(MECHANICAL STRENGTH)	-	0	-
21.1(MECHANICAL STRENGTH)	-	0	-
20.2(Stability and mechanical hazards)	-	0	-
20.1(Stability and mechanical hazards)	-	0	-
19.104(ABNORMAL OPERATION)	-	0	-
19.103(ABNORMAL OPERATION)	-	0	-
19.102(ABNORMAL OPERATION)	-	0	-
19.101(ABNORMAL OPERATION)	-	0	-
19.1 to 19.13, Table No. - 9(ABNORMAL OPERATION)	-	0	-
17(Overload protection of transformers and associated circuits)	-	0	-
16.3(Insulation resistance test)	-	0	-
16.3(Electric strength test)	-	0	-
16.1 & 16.2(Leakage current test)	-	0	-
15.3(Moisture resistance)	-	0	-
15.3(Moisture resistance)	-	0	-
15.2(Moisture resistance)	-	0	-
15.2(Moisture resistance)	-	0	-
15.2(Moisture resistance)	-	0	-
15.2(Moisture resistance)	-	0	-
15.1(Moisture resistance)	-	0	-
14, Table No.- 6 & Table No.-16(Transient over voltages)	-	0	-
13.3 and Table No.- 4(Electric strength test)	-	0	-
13.1, 13.2(Leakage current test)	-	0	-
13.1, 13.2(Leakage current test)	-	0	-
11.101(Heating)	-	0	-
11.1 to 11.8, Table No.-3(Heating)	-	0	-
10.1 & 10.2 -Table No. 1, Table No. 2(Power Input and Current)	-	0	-
8.1.5(Protection against access to live parts)	-	0	-
8.1.4(Protection against access to live parts)	-	0	-
8.1.3(Protection against access to live parts)	-	0	-
8.1.2(Protection against access to live parts)	-	0	-
8.1, 8.1.1 & 8.2(Protection against access to live parts)	-	0	-
7.14(Legibility & Durability of Markings test)	-	0	-
7.1 to 7.13, 7.15, 7.16(Marking)	-	0	-
32(Radiation, toxicity and similar hazards)	-	0	-
31(Resistance to rusting)	-	0	-
31(Resistance to rusting)	-	0	-
30.2.4(Resistance to heat and fire)	-	0	-
30.2(Resistance to heat and fire)	-	0	-
30.1(Resistance to heat and fire)	-	0	-
29.3(Clearances, creepage distances and solid insulation)	-	0	-
29.2(Clearances, creepage distances and solid insulation)	-	0	-
29.2(Clearances, creepage distances and solid insulation)	-	0	-
29.1, Table No.- 16, Table No.- 17 & Table No.18(Clearances, creepage distances and solid insulation)	-	0	-
29.1, Table No.- 16, Table No.- 17 & Table No.18(Clearances, creepage distances and solid insulation)	-	0	-
28.2 to 28.4(Screws and connections)	-	0	-
28.1, Table No.-14(Screws and connections)	-	0	-
27.6(Provision for earthing)	-	0	-
27.5(Provision for earthing)	-	0	-
27.1 to 27.4(Provision for earthing)	-	0	-
26.10 & 26.11(Terminals for external conductors)	-	0	-
26.9(Terminals for external conductors)	-	0	-
26.1 to 26.8(Terminals for external conductors)	-	0	-
25.16 to 25.25(Supply connection and external flexible cords)	-	0	-
25.15(Supply connection and external flexible cords)	-	0	-
25.14(Supply connection and external flexible cords)	-	0	-
25.14(Supply connection and external flexible cords)	-	0	-
25.9 to 25.13(Supply connection and external flexible cords)	-	0	-
25.8, Table No.-11(Supply connection and external flexible cords)	-	0	-
25.5 to 25.7(Supply connection and external flexible cords)	-	0	-
25.4(Supply connection and external flexible cords)	-	0	-
25.3(Supply connection and external flexible cords)	-	0	-
25.2(Supply connection and external flexible cords)	-	0	-
25.1(Supply connection and external flexible cords)	-	0	-
24.101(Components)	-	0	-
24.101(Components)	-	0	-
24.2 to 24.6(Components)	-	0	-
24.1(Components)	-	0	-
23.6 to 23.10(Internal wiring)	-	0	-
23.5(Internal wiring)	-	0	-
23.4(Internal wiring)	-	0	-
23.3(Internal wiring)	-	0	-
23.1 & 23.2(Internal wiring)	-	0	-
22.111(Constructions)	-	0	-
22.111(Constructions)	-	0	-
22.11o(Constructions)	-	0	-
22.109(Constructions)	-	0	-
22.108(Constructions)	-	0	-
22.101 to 22.107(Constructions)	-	0	-
22.13 to 22.48(Constructions)	-	0	-
22.12(Constructions)	-	0	-
22.11(Constructions)	-	0	-
22.11(Constructions)	-	0	-
22.7 to 22.10(Constructions)	-	0	-
22.6(Constructions)	-	0	-
22.5(Constructions)	-	0	-
22.4(Constructions)	-	0	-
22.3(Constructions)	-	0	-
22.2(Constructions)	-	0	-
22.1(Constructions)	-	0	-
21.101(MECHANICAL STRENGTH)	-	0	-
21.101(MECHANICAL STRENGTH)	-	0	-
21.2(MECHANICAL STRENGTH)	-	0	-
21.1(MECHANICAL STRENGTH)	-	0	-
20.2(Stability and mechanical hazards)	-	0	-
20.1(Stability and mechanical hazards)	-	0	-
19.104(ABNORMAL OPERATION)	-	0	-
19.103(ABNORMAL OPERATION)	-	0	-
19.102(ABNORMAL OPERATION)	-	0	-
19.101(ABNORMAL OPERATION)	-	0	-
19.1 to 19.13, Table No. - 9(ABNORMAL OPERATION)	-	0	-
17(Overload protection of transformers and associated circuits)	-	0	-
16.3(Insulation resistance test)	-	0	-
16.3(Electric strength test)	-	0	-
16.1 & 16.2(Leakage current test)	-	0	-
15.3(Moisture resistance)	-	0	-
15.3(Moisture resistance)	-	0	-
15.3(Moisture resistance)	-	0	-
15.2(Moisture resistance)	-	0	-
15.2(Moisture resistance)	-	0	-
15.2(Moisture resistance)	-	0	-
15.2(Moisture resistance)	-	0	-
15.1(Moisture resistance)	-	0	-
14, Table No.- 6 & Table No.-16(Transient over voltages)	-	0	-
13.3 and Table No.- 4(Electric strength test)	-	0	-
13.1, 13.2(Leakage current test)	-	0	-
13.1, 13.2(Leakage current test)	-	0	-
11.101(Heating)	-	0	-
11.1 to 11.8, Table No.-3(Heating)	-	0	-
10.1 & 10.2 -Table No. 1, Table No. 2(Power Input and Current)	-	0	-
8.1.5(Protection against access to live parts)	-	0	-
8.1.4(Protection against access to live parts)	-	0	-
8.1.3(Protection against access to live parts)	-	0	-
8.1.2(Protection against access to live parts)	-	0	-
8.1, 8.1.1 & 8.2(Protection against access to live parts)	-	0	-
7.14(Legibility & Durability of Markings test)	-	0	-
7.1 to 7.13, 7.15, 7.16(Marking)	-	0	-
32(Radiation ,Toxicity and similar hazards)	-	0	-
31(Resistance to Rusting)	-	0	-
30(Resistance to Heat & Fire)	-	0	-
29(Clearances, Creepage Distances & Solid Insulation)	-	0	-
28(Screws & Connections)	-	0	-
27(Provision For Earthing)	-	0	-
26(Terminals For External Conductors)	-	0	-
25(Supply Connection & External Flexible Cords)	-	0	-
24(Components)	-	0	-
23(Internal wiring)	-	0	-
22(Construction)	-	0	-
21(Mechanical strength)	-	0	-
20(Stability & Mechanical Hazards)	-	0	-
19(Abnormal Operation)	-	0	-
17(Overload Protection/ Overload Protection of Transformers & Associated Circuits)	-	0	-
16(Leakage Current and Electric Strength)	-	0	-
15(Moisture Resistance)	-	0	-
14(Transient Over Voltage)	-	0	-
13(Leakage Current and Electric Strength at Operating Temperature)	-	0	-
11(Temperature Rise/ Heating)	-	0	-
10(Power Input & Current)	-	0	-
9(Starting Of Motor Operated Appliances)	-	0	-
8(Protection against access to live parts)	-	0	-
32(Radiation ,Toxicity and similar hazards)	-	0	-
31(Resistance to Rusting)	-	0	-
29(Clearances, Creepage Distances & Solid Insulation)	-	0	-
28(Screws & Connections)	-	0	-
30(Resistance to Heat & Fire)	-	0	-
27(Provision For Earthing)	-	0	-
25(Supply Connection & External Flexible Cords)	-	0	-
26(Terminals For External Conductors)	-	0	-
24(Components)	-	0	-
23(Internal wiring)	-	0	-
22(Construction)	-	0	-
21(Mechanical strength)	-	0	-
20(Stability & Mechanical Hazards)	-	0	-
19(Abnormal Operation)	-	0	-
17(Overload Protection/ Overload Protection of Transformers & Associated Circuits)	-	0	-
16(Leakage Current and Electric Strength)	-	0	-
15(Moisture Resistance)	-	0	-
14(Transient Over Voltage)	-	0	-
13(Leakage Current and Electric Strength at Operating Temperature)	-	0	-
11(Temperature Rise/ Heating)	-	0	-
10(Power Input & Current)	-	0	-
9(Starting Of Motor Operated Appliances)	-	0	-
8(Protection against access to live parts)	-	0	-
19.11.4.1(Electrostatic discharges)	-	0	-
19.11.4.2(Radiated fields)	-	0	-
19.11.4.3(Fast transient bursts)	-	0	-
19.11.4.4(Surge immunity test)	-	0	-
19.11.4.5(Immunity to conducted discharges)	-	0	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	0	-
19.11.4.7(Harmonics)	-	0	-
15.3(Moisture resistance)	-	0	-
Cl. 32 IS 302-2-9(Radiation, Toxicity and similar hazards)	-	0	-
Cl. 31 IS 302-2-9(Resistance To Rusting )	-	0	-
Cl. 30 IS 302-2-9(Resistance To Heat, Fire And Tracking)	-	0	-
Cl. 29 IS 302-2-9(Creepage Distances, Clearances And Distances Through Insulation)	-	0	-
Cl. 28 IS 302-2-9(Screws and Connections)	-	0	-
Cl. 27 IS 302-2-9(Provision For Earthing )	-	0	-
Cl. 26 IS 302-2-9(Terminal For External Conductors )	-	0	-
Cl. 25 IS 302-2-9(Supply Connections and External Flexible Cables and Cords )	-	0	-
Cl. 24 IS 302-2-9(Components)	-	0	-
Cl. 23 IS 302-2-9(Internal Wiring)	-	0	-
Cl. 22 IS 302-2-9(Construction )	-	0	-
Cl. 21 IS 302-2-9(Mechanical Strength)	-	0	-
Cl. 20 IS 302-2-9(Stability and mechanical Hazards)	-	0	-
Cl. 19 IS 302-2-9(Abnormal Operation )	-	0	-
Cl. 18 IS 302-2-9(Endurance)	-	0	-
Cl. 17 IS 302-2-9(Overload protection of transformers and associated circuits.)	-	0	-
Cl. 16 IS 302-2-9(Leakage Current and Electric strength )	-	0	-
Cl. 15 IS 302-2-9(Moisture Resistance)	-	0	-
Cl. 14 IS 302-2-9(Transient overvoltage)	-	0	-
Cl. 13.3 IS 302-2-9(Leakage Current & Electric Strength at Operating Temperature)	-	0	-
Cl. 11 IS 302-2-9(Heating)	-	0	-
Cl. 10 IS 302-2-9(Power Input and Current )	-	0	-
Cl. 9 IS 302-2-9(Starting of motor operated appliances)	-	0	-
Cl. 8 IS 302-2-9(Protection against access to live parts)	-	0	-
Cl. 7 IS 302-2-9(Marking and Instruction)	-	0	-
Cl. 6 IS 302-2-9(Classification- IS 302-1)	-	0	-
32(Radiation, toxicity and similar hazards)	-	0	-
31(Resistance to rusting)	-	0	-
31(Resistance to rusting)	-	0	-
30.2.4(Resistance to heat and fire)	-	0	-
30.2(Resistance to heat and fire)	-	0	-
30.1(Resistance to heat and fire)	-	0	-
29.3(Clearances, creepage distances and solid insulation)	-	0	-
29.2(Clearances, creepage distances and solid insulation)	-	0	-
29.2(Clearances, creepage distances and solid insulation)	-	0	-
29.1, Table No.- 16, Table No.- 17 & Table No.18(Clearances, creepage distances and solid insulation)	-	0	-
29.1, Table No.- 16, Table No.- 17 & Table No.18(Clearances, creepage distances and solid insulation)	-	0	-
28.2 to 28.4(Screws and connections)	-	0	-
28.1, Table No.-14(Screws and connections)	-	0	-
27.6(Provision for earthing)	-	0	-
27.5(Provision for earthing)	-	0	-
27.1 to 27.4(Provision for earthing)	-	0	-
26.10 & 26.11(Terminals for external conductors)	-	0	-
26.9(Terminals for external conductors)	-	0	-
26.1 to 26.8(Terminals for external conductors)	-	0	-
25.16 to 25.25(Supply connection and external flexible cords)	-	0	-
25.15(Supply connection and external flexible cords)	-	0	-
25.14(Supply connection and external flexible cords)	-	0	-
25.14(Supply connection and external flexible cords)	-	0	-
25.9 to 25.13(Supply connection and external flexible cords)	-	0	-
25.8, Table No.-11(Supply connection and external flexible cords)	-	0	-
25.5 to 25.7(Supply connection and external flexible cords)	-	0	-
25.4(Supply connection and external flexible cords)	-	0	-
25.3(Supply connection and external flexible cords)	-	0	-
25.2(Supply connection and external flexible cords)	-	0	-
25.1(Supply connection and external flexible cords)	-	0	-
24.101(Components)	-	0	-
24.101(Components)	-	0	-
24.2 to 24.6(Components)	-	0	-
24.1(Components)	-	0	-
23.6 to 23.10(Internal wiring)	-	0	-
23.5(Internal wiring)	-	0	-
23.4(Internal wiring)	-	0	-
23.3(Internal wiring)	-	0	-
23.1 & 23.2(Internal wiring)	-	0	-
22.111(Constructions)	-	0	-
22.111(Constructions)	-	0	-
22.11o(Constructions)	-	0	-
22.109(Constructions)	-	0	-
22.108(Constructions)	-	0	-
22.101 to 22.107(Constructions)	-	0	-
22.13 to 22.48(Constructions)	-	0	-
22.12(Constructions)	-	0	-
22.11(Constructions)	-	0	-
22.11(Constructions)	-	0	-
22.7 to 22.10(Constructions)	-	0	-
22.6(Constructions)	-	0	-
22.5(Constructions)	-	0	-
22.4(Constructions)	-	0	-
22.3(Constructions)	-	0	-
22.2(Constructions)	-	0	-
22.1(Constructions)	-	0	-
21.101(MECHANICAL STRENGTH)	-	0	-
21.101(MECHANICAL STRENGTH)	-	0	-
21.2(MECHANICAL STRENGTH)	-	0	-
21.1(MECHANICAL STRENGTH)	-	0	-
20.2(Stability and mechanical hazards)	-	0	-
20.1(Stability and mechanical hazards)	-	0	-
19.104(ABNORMAL OPERATION)	-	0	-
19.103(ABNORMAL OPERATION)	-	0	-
19.102(ABNORMAL OPERATION)	-	0	-
19.101(ABNORMAL OPERATION)	-	0	-
19.1 to 19.13, Table No. - 9(ABNORMAL OPERATION)	-	0	-
17(Overload protection of transformers and associated circuits)	-	0	-
16.3(Insulation resistance test)	-	0	-
16.3(Electric strength test)	-	0	-
16.1 & 16.2(Leakage current test)	-	0	-
15.3(Moisture resistance)	-	0	-
15.3(Moisture resistance)	-	0	-
15.2(Moisture resistance)	-	0	-
15.2(Moisture resistance)	-	0	-
15.2(Moisture resistance)	-	0	-
15.2(Moisture resistance)	-	0	-
15.1(Moisture resistance)	-	0	-
14, Table No.- 6 & Table No.-16(Transient over voltages)	-	0	-
13.3 and Table No.- 4(Electric strength test)	-	0	-
13.1, 13.2(Leakage current test)	-	0	-
13.1, 13.2(Leakage current test)	-	0	-
11.101(Heating)	-	0	-
11.1 to 11.8, Table No.-3(Heating)	-	0	-
10.1 & 10.2 -Table No. 1, Table No. 2(Power Input and Current)	-	0	-
8.1.5(Protection against access to live parts)	-	0	-
8.1.4(Protection against access to live parts)	-	0	-
8.1.3(Protection against access to live parts)	-	0	-
8.1.2(Protection against access to live parts)	-	0	-
8.1, 8.1.1 & 8.2(Protection against access to live parts)	-	0	-
7.14(Legibility & Durability of Markings test)	-	0	-
7.1 to 7.13, 7.15, 7.16(Marking)	-	0	-
32(Radiation, toxicity and similar hazards)	-	0	-
31(Resistance to rusting)	-	0	-
31(Resistance to rusting)	-	0	-
30.2.4(Resistance to heat and fire)	-	0	-
30.2(Resistance to heat and fire)	-	0	-
30.1(Resistance to heat and fire)	-	0	-
29.3(Clearances, creepage distances and solid insulation)	-	0	-
29.2(Clearances, creepage distances and solid insulation)	-	0	-
29.2(Clearances, creepage distances and solid insulation)	-	0	-
29.1, Table No.- 16, Table No.- 17 & Table No.18(Clearances, creepage distances and solid insulation)	-	0	-
29.1, Table No.- 16, Table No.- 17 & Table No.18(Clearances, creepage distances and solid insulation)	-	0	-
28.2 to 28.4(Screws and connections)	-	0	-
28.1, Table No.-14(Screws and connections)	-	0	-
27.6(Provision for earthing)	-	0	-
27.5(Provision for earthing)	-	0	-
27.1 to 27.4(Provision for earthing)	-	0	-
26.10 & 26.11(Terminals for external conductors)	-	0	-
26.9(Terminals for external conductors)	-	0	-
26.1 to 26.8(Terminals for external conductors)	-	0	-
25.16 to 25.25(Supply connection and external flexible cords)	-	0	-
25.15(Supply connection and external flexible cords)	-	0	-
25.14(Supply connection and external flexible cords)	-	0	-
25.14(Supply connection and external flexible cords)	-	0	-
25.9 to 25.13(Supply connection and external flexible cords)	-	0	-
25.8, Table No.-11(Supply connection and external flexible cords)	-	0	-
25.5 to 25.7(Supply connection and external flexible cords)	-	0	-
25.4(Supply connection and external flexible cords)	-	0	-
25.3(Supply connection and external flexible cords)	-	0	-
25.2(Supply connection and external flexible cords)	-	0	-
25.1(Supply connection and external flexible cords)	-	0	-
24.101(Components)	-	0	-
24.101(Components)	-	0	-
24.2 to 24.6(Components)	-	0	-
24.1(Components)	-	0	-
23.6 to 23.10(Internal wiring)	-	0	-
23.5(Internal wiring)	-	0	-
23.4(Internal wiring)	-	0	-
23.3(Internal wiring)	-	0	-
23.1 & 23.2(Internal wiring)	-	0	-
22.111(Constructions)	-	0	-
22.111(Constructions)	-	0	-
22.11o(Constructions)	-	0	-
22.109(Constructions)	-	0	-
22.108(Constructions)	-	0	-
22.101 to 22.107(Constructions)	-	0	-
22.13 to 22.48(Constructions)	-	0	-
22.12(Constructions)	-	0	-
22.11(Constructions)	-	0	-
22.11(Constructions)	-	0	-
22.7 to 22.10(Constructions)	-	0	-
22.6(Constructions)	-	0	-
22.5(Constructions)	-	0	-
22.4(Constructions)	-	0	-
22.3(Constructions)	-	0	-
22.2(Constructions)	-	0	-
22.1(Constructions)	-	0	-
21.101(MECHANICAL STRENGTH)	-	0	-
21.101(MECHANICAL STRENGTH)	-	0	-
21.2(MECHANICAL STRENGTH)	-	0	-
21.1(MECHANICAL STRENGTH)	-	0	-
20.2(Stability and mechanical hazards)	-	0	-
20.1(Stability and mechanical hazards)	-	0	-
19.104(ABNORMAL OPERATION)	-	0	-
19.103(ABNORMAL OPERATION)	-	0	-
19.102(ABNORMAL OPERATION)	-	0	-
19.101(ABNORMAL OPERATION)	-	0	-
19.1 to 19.13, Table No. - 9(ABNORMAL OPERATION)	-	0	-
17(Overload protection of transformers and associated circuits)	-	0	-
16.3(Insulation resistance test)	-	0	-
16.3(Electric strength test)	-	0	-
16.1 & 16.2(Leakage current test)	-	0	-
15.3(Moisture resistance)	-	0	-
15.3(Moisture resistance)	-	0	-
15.3(Moisture resistance)	-	0	-
15.2(Moisture resistance)	-	0	-
15.2(Moisture resistance)	-	0	-
15.2(Moisture resistance)	-	0	-
15.2(Moisture resistance)	-	0	-
15.1(Moisture resistance)	-	0	-
14, Table No.- 6 & Table No.-16(Transient over voltages)	-	0	-
13.3 and Table No.- 4(Electric strength test)	-	0	-
13.1, 13.2(Leakage current test)	-	0	-
13.1, 13.2(Leakage current test)	-	0	-
11.101(Heating)	-	0	-
11.1 to 11.8, Table No.-3(Heating)	-	0	-
10.1 & 10.2 -Table No. 1, Table No. 2(Power Input and Current)	-	0	-
8.1.5(Protection against access to live parts)	-	0	-
8.1.4(Protection against access to live parts)	-	0	-
8.1.3(Protection against access to live parts)	-	0	-
8.1.2(Protection against access to live parts)	-	0	-
8.1, 8.1.1 & 8.2(Protection against access to live parts)	-	0	-
7.14(Legibility & Durability of Markings test)	-	0	-
7.1 to 7.13, 7.15, 7.16(Marking)	-	0	-
32(Radiation ,Toxicity and similar hazards)	-	0	-
31(Resistance to Rusting)	-	0	-
30(Resistance to Heat & Fire)	-	0	-
29(Clearances, Creepage Distances & Solid Insulation)	-	0	-
28(Screws & Connections)	-	0	-
27(Provision For Earthing)	-	0	-
26(Terminals For External Conductors)	-	0	-
25(Supply Connection & External Flexible Cords)	-	0	-
24(Components)	-	0	-
23(Internal wiring)	-	0	-
22(Construction)	-	0	-
21(Mechanical strength)	-	0	-
20(Stability & Mechanical Hazards)	-	0	-
19(Abnormal Operation)	-	0	-
17(Overload Protection/ Overload Protection of Transformers & Associated Circuits)	-	0	-
16(Leakage Current and Electric Strength)	-	0	-
15(Moisture Resistance)	-	0	-
14(Transient Over Voltage)	-	0	-
13(Leakage Current and Electric Strength at Operating Temperature)	-	0	-
11(Temperature Rise/ Heating)	-	0	-
10(Power Input & Current)	-	0	-
9(Starting Of Motor Operated Appliances)	-	0	-
8(Protection against access to live parts)	-	0	-
32(Radiation ,Toxicity and similar hazards)	-	0	-
31(Resistance to Rusting)	-	0	-
29(Clearances, Creepage Distances & Solid Insulation)	-	0	-
28(Screws & Connections)	-	0	-
30(Resistance to Heat & Fire)	-	0	-
27(Provision For Earthing)	-	0	-
25(Supply Connection & External Flexible Cords)	-	0	-
26(Terminals For External Conductors)	-	0	-
24(Components)	-	0	-
23(Internal wiring)	-	0	-
22(Construction)	-	0	-
21(Mechanical strength)	-	0	-
20(Stability & Mechanical Hazards)	-	0	-
19(Abnormal Operation)	-	0	-
17(Overload Protection/ Overload Protection of Transformers & Associated Circuits)	-	0	-
16(Leakage Current and Electric Strength)	-	0	-
15(Moisture Resistance)	-	0	-
14(Transient Over Voltage)	-	0	-
13(Leakage Current and Electric Strength at Operating Temperature)	-	0	-
11(Temperature Rise/ Heating)	-	0	-
10(Power Input & Current)	-	0	-
9(Starting Of Motor Operated Appliances)	-	0	-
8(Protection against access to live parts)	-	0	-
19.11.4.1(Electrostatic discharges)	-	0	-
19.11.4.2(Radiated fields)	-	0	-
19.11.4.3(Fast transient bursts)	-	0	-
19.11.4.4(Surge immunity test)	-	0	-
19.11.4.5(Immunity to conducted discharges)	-	0	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	0	-
19.11.4.7(Harmonics)	-	0	-
15.3(Moisture resistance)	-	0	-
Cl. 32 IS 302-2-9(Radiation, Toxicity and similar hazards)	-	0	-
Cl. 31 IS 302-2-9(Resistance To Rusting )	-	0	-
Cl. 30 IS 302-2-9(Resistance To Heat, Fire And Tracking)	-	0	-
Cl. 29 IS 302-2-9(Creepage Distances, Clearances And Distances Through Insulation)	-	0	-
Cl. 28 IS 302-2-9(Screws and Connections)	-	0	-
Cl. 27 IS 302-2-9(Provision For Earthing )	-	0	-
Cl. 26 IS 302-2-9(Terminal For External Conductors )	-	0	-
Cl. 25 IS 302-2-9(Supply Connections and External Flexible Cables and Cords )	-	0	-
Cl. 24 IS 302-2-9(Components)	-	0	-
Cl. 23 IS 302-2-9(Internal Wiring)	-	0	-
Cl. 22 IS 302-2-9(Construction )	-	0	-
Cl. 21 IS 302-2-9(Mechanical Strength)	-	0	-
Cl. 20 IS 302-2-9(Stability and mechanical Hazards)	-	0	-
Cl. 19 IS 302-2-9(Abnormal Operation )	-	0	-
Cl. 18 IS 302-2-9(Endurance)	-	0	-
Cl. 17 IS 302-2-9(Overload protection of transformers and associated circuits.)	-	0	-
Cl. 16 IS 302-2-9(Leakage Current and Electric strength )	-	0	-
Cl. 15 IS 302-2-9(Moisture Resistance)	-	0	-
Cl. 14 IS 302-2-9(Transient overvoltage)	-	0	-
Cl. 13.3 IS 302-2-9(Leakage Current & Electric Strength at Operating Temperature)	-	0	-
Cl. 11 IS 302-2-9(Heating)	-	0	-
Cl. 10 IS 302-2-9(Power Input and Current )	-	0	-
Cl. 9 IS 302-2-9(Starting of motor operated appliances)	-	0	-
Cl. 8 IS 302-2-9(Protection against access to live parts)	-	0	-
Cl. 7 IS 302-2-9(Marking and Instruction)	-	0	-
Cl. 6 IS 302-2-9(Classification- IS 302-1)	-	0	-
32(Radiation, toxicity and similar hazards)	-	0	-
31(Resistance to rusting)	-	0	-
31(Resistance to rusting)	-	0	-
30.2.4(Resistance to heat and fire)	-	0	-
30.2(Resistance to heat and fire)	-	0	-
30.1(Resistance to heat and fire)	-	0	-
29.3(Clearances, creepage distances and solid insulation)	-	0	-
29.2(Clearances, creepage distances and solid insulation)	-	0	-
29.2(Clearances, creepage distances and solid insulation)	-	0	-
29.1, Table No.- 16, Table No.- 17 & Table No.18(Clearances, creepage distances and solid insulation)	-	0	-
29.1, Table No.- 16, Table No.- 17 & Table No.18(Clearances, creepage distances and solid insulation)	-	0	-
28.2 to 28.4(Screws and connections)	-	0	-
28.1, Table No.-14(Screws and connections)	-	0	-
27.6(Provision for earthing)	-	0	-
27.5(Provision for earthing)	-	0	-
27.1 to 27.4(Provision for earthing)	-	0	-
26.10 & 26.11(Terminals for external conductors)	-	0	-
26.9(Terminals for external conductors)	-	0	-
26.1 to 26.8(Terminals for external conductors)	-	0	-
25.16 to 25.25(Supply connection and external flexible cords)	-	0	-
25.15(Supply connection and external flexible cords)	-	0	-
25.14(Supply connection and external flexible cords)	-	0	-
25.14(Supply connection and external flexible cords)	-	0	-
25.9 to 25.13(Supply connection and external flexible cords)	-	0	-
25.8, Table No.-11(Supply connection and external flexible cords)	-	0	-
25.5 to 25.7(Supply connection and external flexible cords)	-	0	-
25.4(Supply connection and external flexible cords)	-	0	-
25.3(Supply connection and external flexible cords)	-	0	-
25.2(Supply connection and external flexible cords)	-	0	-
25.1(Supply connection and external flexible cords)	-	0	-
24.101(Components)	-	0	-
24.101(Components)	-	0	-
24.2 to 24.6(Components)	-	0	-
24.1(Components)	-	0	-
23.6 to 23.10(Internal wiring)	-	0	-
23.5(Internal wiring)	-	0	-
23.4(Internal wiring)	-	0	-
23.3(Internal wiring)	-	0	-
23.1 & 23.2(Internal wiring)	-	0	-
22.111(Constructions)	-	0	-
22.111(Constructions)	-	0	-
22.11o(Constructions)	-	0	-
22.109(Constructions)	-	0	-
22.108(Constructions)	-	0	-
22.101 to 22.107(Constructions)	-	0	-
22.13 to 22.48(Constructions)	-	0	-
22.12(Constructions)	-	0	-
22.11(Constructions)	-	0	-
22.11(Constructions)	-	0	-
22.7 to 22.10(Constructions)	-	0	-
22.6(Constructions)	-	0	-
22.5(Constructions)	-	0	-
22.4(Constructions)	-	0	-
22.3(Constructions)	-	0	-
22.2(Constructions)	-	0	-
22.1(Constructions)	-	0	-
21.101(MECHANICAL STRENGTH)	-	0	-
21.101(MECHANICAL STRENGTH)	-	0	-
21.2(MECHANICAL STRENGTH)	-	0	-
21.1(MECHANICAL STRENGTH)	-	0	-
20.2(Stability and mechanical hazards)	-	0	-
20.1(Stability and mechanical hazards)	-	0	-
19.104(ABNORMAL OPERATION)	-	0	-
19.103(ABNORMAL OPERATION)	-	0	-
19.102(ABNORMAL OPERATION)	-	0	-
19.101(ABNORMAL OPERATION)	-	0	-
19.1 to 19.13, Table No. - 9(ABNORMAL OPERATION)	-	0	-
17(Overload protection of transformers and associated circuits)	-	0	-
16.3(Insulation resistance test)	-	0	-
16.3(Electric strength test)	-	0	-
16.1 & 16.2(Leakage current test)	-	0	-
15.3(Moisture resistance)	-	0	-
15.3(Moisture resistance)	-	0	-
15.2(Moisture resistance)	-	0	-
15.2(Moisture resistance)	-	0	-
15.2(Moisture resistance)	-	0	-
15.2(Moisture resistance)	-	0	-
15.1(Moisture resistance)	-	0	-
14, Table No.- 6 & Table No.-16(Transient over voltages)	-	0	-
13.3 and Table No.- 4(Electric strength test)	-	0	-
13.1, 13.2(Leakage current test)	-	0	-
13.1, 13.2(Leakage current test)	-	0	-
11.101(Heating)	-	0	-
11.1 to 11.8, Table No.-3(Heating)	-	0	-
10.1 & 10.2 -Table No. 1, Table No. 2(Power Input and Current)	-	0	-
8.1.5(Protection against access to live parts)	-	0	-
8.1.4(Protection against access to live parts)	-	0	-
8.1.3(Protection against access to live parts)	-	0	-
8.1.2(Protection against access to live parts)	-	0	-
8.1, 8.1.1 & 8.2(Protection against access to live parts)	-	0	-
7.14(Legibility & Durability of Markings test)	-	0	-
7.1 to 7.13, 7.15, 7.16(Marking)	-	0	-
32(Radiation, toxicity and similar hazards)	-	0	-
31(Resistance to rusting)	-	0	-
31(Resistance to rusting)	-	0	-
30.2.4(Resistance to heat and fire)	-	0	-
30.2(Resistance to heat and fire)	-	0	-
30.1(Resistance to heat and fire)	-	0	-
29.3(Clearances, creepage distances and solid insulation)	-	0	-
29.2(Clearances, creepage distances and solid insulation)	-	0	-
29.2(Clearances, creepage distances and solid insulation)	-	0	-
29.1, Table No.- 16, Table No.- 17 & Table No.18(Clearances, creepage distances and solid insulation)	-	0	-
29.1, Table No.- 16, Table No.- 17 & Table No.18(Clearances, creepage distances and solid insulation)	-	0	-
28.2 to 28.4(Screws and connections)	-	0	-
28.1, Table No.-14(Screws and connections)	-	0	-
27.6(Provision for earthing)	-	0	-
27.5(Provision for earthing)	-	0	-
27.1 to 27.4(Provision for earthing)	-	0	-
26.10 & 26.11(Terminals for external conductors)	-	0	-
26.9(Terminals for external conductors)	-	0	-
26.1 to 26.8(Terminals for external conductors)	-	0	-
25.16 to 25.25(Supply connection and external flexible cords)	-	0	-
25.15(Supply connection and external flexible cords)	-	0	-
25.14(Supply connection and external flexible cords)	-	0	-
25.14(Supply connection and external flexible cords)	-	0	-
25.9 to 25.13(Supply connection and external flexible cords)	-	0	-
25.8, Table No.-11(Supply connection and external flexible cords)	-	0	-
25.5 to 25.7(Supply connection and external flexible cords)	-	0	-
25.4(Supply connection and external flexible cords)	-	0	-
25.3(Supply connection and external flexible cords)	-	0	-
25.2(Supply connection and external flexible cords)	-	0	-
25.1(Supply connection and external flexible cords)	-	0	-
24.101(Components)	-	0	-
24.101(Components)	-	0	-
24.2 to 24.6(Components)	-	0	-
24.1(Components)	-	0	-
23.6 to 23.10(Internal wiring)	-	0	-
23.5(Internal wiring)	-	0	-
23.4(Internal wiring)	-	0	-
23.3(Internal wiring)	-	0	-
23.1 & 23.2(Internal wiring)	-	0	-
22.111(Constructions)	-	0	-
22.111(Constructions)	-	0	-
22.11o(Constructions)	-	0	-
22.109(Constructions)	-	0	-
22.108(Constructions)	-	0	-
22.101 to 22.107(Constructions)	-	0	-
22.13 to 22.48(Constructions)	-	0	-
22.12(Constructions)	-	0	-
22.11(Constructions)	-	0	-
22.11(Constructions)	-	0	-
22.7 to 22.10(Constructions)	-	0	-
22.6(Constructions)	-	0	-
22.5(Constructions)	-	0	-
22.4(Constructions)	-	0	-
22.3(Constructions)	-	0	-
22.2(Constructions)	-	0	-
22.1(Constructions)	-	0	-
21.101(MECHANICAL STRENGTH)	-	0	-
21.101(MECHANICAL STRENGTH)	-	0	-
21.2(MECHANICAL STRENGTH)	-	0	-
21.1(MECHANICAL STRENGTH)	-	0	-
20.2(Stability and mechanical hazards)	-	0	-
20.1(Stability and mechanical hazards)	-	0	-
19.104(ABNORMAL OPERATION)	-	0	-
19.103(ABNORMAL OPERATION)	-	0	-
19.102(ABNORMAL OPERATION)	-	0	-
19.101(ABNORMAL OPERATION)	-	0	-
19.1 to 19.13, Table No. - 9(ABNORMAL OPERATION)	-	0	-
17(Overload protection of transformers and associated circuits)	-	0	-
16.3(Insulation resistance test)	-	0	-
16.3(Electric strength test)	-	0	-
16.1 & 16.2(Leakage current test)	-	0	-
15.3(Moisture resistance)	-	0	-
15.3(Moisture resistance)	-	0	-
15.3(Moisture resistance)	-	0	-
15.2(Moisture resistance)	-	0	-
15.2(Moisture resistance)	-	0	-
15.2(Moisture resistance)	-	0	-
15.2(Moisture resistance)	-	0	-
15.1(Moisture resistance)	-	0	-
14, Table No.- 6 & Table No.-16(Transient over voltages)	-	0	-
13.3 and Table No.- 4(Electric strength test)	-	0	-
13.1, 13.2(Leakage current test)	-	0	-
13.1, 13.2(Leakage current test)	-	0	-
11.101(Heating)	-	0	-
11.1 to 11.8, Table No.-3(Heating)	-	0	-
10.1 & 10.2 -Table No. 1, Table No. 2(Power Input and Current)	-	0	-
8.1.5(Protection against access to live parts)	-	0	-
8.1.4(Protection against access to live parts)	-	0	-
8.1.3(Protection against access to live parts)	-	0	-
8.1.2(Protection against access to live parts)	-	0	-
8.1, 8.1.1 & 8.2(Protection against access to live parts)	-	0	-
7.14(Legibility & Durability of Markings test)	-	0	-
7.1 to 7.13, 7.15, 7.16(Marking)	-	0	-
32(Radiation ,Toxicity and similar hazards)	-	0	-
31(Resistance to Rusting)	-	0	-
30(Resistance to Heat & Fire)	-	0	-
29(Clearances, Creepage Distances & Solid Insulation)	-	0	-
28(Screws & Connections)	-	0	-
27(Provision For Earthing)	-	0	-
26(Terminals For External Conductors)	-	0	-
25(Supply Connection & External Flexible Cords)	-	0	-
24(Components)	-	0	-
23(Internal wiring)	-	0	-
22(Construction)	-	0	-
21(Mechanical strength)	-	0	-
20(Stability & Mechanical Hazards)	-	0	-
19(Abnormal Operation)	-	0	-
17(Overload Protection/ Overload Protection of Transformers & Associated Circuits)	-	0	-
16(Leakage Current and Electric Strength)	-	0	-
15(Moisture Resistance)	-	0	-
14(Transient Over Voltage)	-	0	-
13(Leakage Current and Electric Strength at Operating Temperature)	-	0	-
11(Temperature Rise/ Heating)	-	0	-
10(Power Input & Current)	-	0	-
9(Starting Of Motor Operated Appliances)	-	0	-
8(Protection against access to live parts)	-	0	-
32(Radiation ,Toxicity and similar hazards)	-	0	-
31(Resistance to Rusting)	-	0	-
29(Clearances, Creepage Distances & Solid Insulation)	-	0	-
28(Screws & Connections)	-	0	-
30(Resistance to Heat & Fire)	-	0	-
27(Provision For Earthing)	-	0	-
25(Supply Connection & External Flexible Cords)	-	0	-
26(Terminals For External Conductors)	-	0	-
24(Components)	-	0	-
23(Internal wiring)	-	0	-
22(Construction)	-	0	-
21(Mechanical strength)	-	0	-
20(Stability & Mechanical Hazards)	-	0	-
19(Abnormal Operation)	-	0	-
17(Overload Protection/ Overload Protection of Transformers & Associated Circuits)	-	0	-
16(Leakage Current and Electric Strength)	-	0	-
15(Moisture Resistance)	-	0	-
14(Transient Over Voltage)	-	0	-
13(Leakage Current and Electric Strength at Operating Temperature)	-	0	-
11(Temperature Rise/ Heating)	-	0	-
10(Power Input & Current)	-	0	-
9(Starting Of Motor Operated Appliances)	-	0	-
8(Protection against access to live parts)	-	0	-
19.11.4.1(Electrostatic discharges)	-	0	-
19.11.4.2(Radiated fields)	-	0	-
19.11.4.3(Fast transient bursts)	-	0	-
19.11.4.4(Surge immunity test)	-	0	-
19.11.4.5(Immunity to conducted discharges)	-	0	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	0	-
19.11.4.7(Harmonics)	-	0	-
15.3(Moisture resistance)	-	0	-

03 Dec, 2026

-
Included w.e.f 07.05.2024 Exclusion: Cl.19.11.4.1 (Electrostatic discharges), Cl. 19.11.4.2 (Radiated fields), Cl. 19.11.4.3 (Fast transient bursts), Cl. 19.11.4.4 (Surge immunity test), Cl. 19.11.4.6 (Class 3 Voltage dips and interruptions), Cl. 19.11.4.7 (Harmonics), Cl. 19.11.4.5 (Injected currents)

IS 302 : Part 2 : Sec 30 (2007)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 30 room heaters (First Revision)

Rated voltage being not more than 250 V for single-phas

16350 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.6 (Classification)	-	500	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	500	-
Cl.6 (Classification)	-	0	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7(Marking and Instructions)	-	0	-
Cl.7(Marking and Instructions)	-	0	-
Cl.7(Marking and Instructions)	-	0	-
Cl.7.3(Marking and Instructions)	-	0	-
Cl.7.3(Marking and Instructions)	-	0	-
Cl.7.3(Marking and Instructions)	-	0	-
Cl.7.4(Marking and Instructions)	-	0	-
Cl.7.5(Marking and Instructions)	-	0	-
Cl.7.6 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.8 of IS :302-1:2008(Marking and Instructions)	-	0	-
Cl.7.9 of IS :302-1:2008(Marking and Instructions)	-	0	-
Cl.7.10 of IS :302-1:2008(Marking and Instructions)	-	0	-
Cl.7.11 of IS :302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12.1 & IS:302-1:2009(Marking and Instructions)	-	0	-
Cl.7.13 of IS 302-1:2008(Marking and Instructions)	-	0	-
Cl.7.14 of IS302-1:2008(Marking and Instructions)	-	0	-
Cl.7.14(Marking and Instructions)	-	0	-
Cl.7.14(Marking and Instructions)	-	0	-
Cl.7.15 of IS 302-1:2008(Marking and Instructions)	-	0	-
Cl.7.15 of IS 302-1:2008(Marking and Instructions)	-	0	-
Cl.7.15 of IS 302-1:2008(Marking and Instructions)	-	0	-
Cl.7.15 of IS 302-1:2008(Marking and Instructions)	-	0	-
Cl.7.101(Marking and Instructions)	-	0	-
Cl.8 & IS:302-1:2008(Protection Against Access to Live Parts)	-	500	-
Cl.10 & IS:302-1:2008(Power Input and Current)	-	850	-
Cl.11 & IS:302-1:2008(Heating)	-	1000	-
Cl.11 & IS:302-1:2008(Heating)	-	0	-
Cl.11 & IS:302-1:2008(Heating)	-	0	-
Cl.11 & IS:302-1:2008(Heating)	-	0	-
Cl.11 & IS:302-1:2008(Heating)	-	0	-
Cl.11 & IS:302-1:2008(Heating)	-	0	-
Cl.11 & IS:302-1:2008(Heating)	-	0	-
Cl.11 & IS:302-1:2008(Heating)	-	0	-
Cl.11 & IS:302-1:2008(Heating)	-	0	-
Cl.11 & IS:302-1:2008(Heating)	-	0	-
Cl.11 & IS:302-1:2008(Heating)	-	0	-
Cl.11 & IS:302-1:2008(Heating)	-	0	-
Cl.11 & IS:302-1:2008(Heating)	-	0	-
Cl.11 & IS:302-1:2008(Heating)	-	0	-
Cl.11 & IS:302-1:2008(Heating)	-	0	-
Cl.11 & IS:302-1:2008(Heating)	-	0	-
Cl.11.8(Heating)	-	0	-
Cl.11.8(Heating)	-	0	-
Cl.11.8(Heating)	-	0	-
Cl.13 & IS:302-1:2008(Leakage Current & Electric Strength at operating temp. )	-	500	-
Cl.13 & IS:302-1:2008(Leakage Current & Electric Strength at operating temp. )	-	0	-
Cl.14 & IS:302-1:2008(Transient Over Voltages)	-	0	-
Cl.15 & IS: 302-1:2008(Moisture Resistance )	-	1000	-
Cl.15.3 of IS 302-1:200(Moisture Resistance )	-	0	-
Cl.16 & IS:302-1:2008(Leakage Current & Electric Strength )	-	500	-
Cl.16 & IS:302-1:2008(Leakage Current & Electric Strength )	-	0	-
Cl.17 & IS:302-1:2008(Over load Protection of Transformers and Associated Circuits )	-	0	-
Cl.18 (Endurance. )	-	0	-
Cl.19 & IS:302-1:2008(Abnormal Operation.)	-	1000	-
Cl.19 & IS:302-1:2008(Abnormal Operation.)	-	0	-
Cl.19 & IS:302-1:2008(Abnormal Operation.)	-	0	-
Cl.19 & IS:302-1:2008(Abnormal Operation.)	-	0	-
Cl.19.101(Abnormal Operation.)	-	0	-
Cl.19.102(Abnormal Operation.)	-	0	-
Cl.19.103(Abnormal Operation.)	-	0	-
Cl.19.104(Abnormal Operation.)	-	0	-
Cl.19.105(Abnormal Operation.)	-	0	-
Cl.19.106(Abnormal Operation.)	-	0	-
Table 8 of IS 302-1:2008(Abnormal Operation.)	-	0	-
Cl.19.107(Abnormal Operation.)	-	0	-
Cl.19.108(Abnormal Operation.)	-	0	-
Cl.19.109(Abnormal Operation.)	-	0	-
Cl.19.110(Abnormal Operation.)	-	0	-
Cl.19.111(Abnormal Operation.)	-	0	-
Cl.19.112(Abnormal Operation.)	-	0	-
Cl.19.113(Abnormal Operation.)	-	0	-
Cl.19.114(Abnormal Operation.)	-	0	-
Cl.20 & IS:302-1:2008(Stability & Mechanical Hazards)	-	500	-
Cl.21 & IS:302-1:2008)(Mechanical Strength.)	-	500	-
Cl.21.2 of IS 302-1:2008(Mechanical Strength.)	-	0	-
Cl.21.101 (Mechanical Strength.)	-	0	-
Cl.21.102(Mechanical Strength.)	-	0	-
Cl.21.103(Mechanical Strength.)	-	0	-
Cl.22.1 of IS 302-1:2008(Construction)	-	1000	-
Cl.22.5 of IS 302-1:2008(Construction)	-	0	-
Cl.22.6 of IS 302-1:2008(Construction)	-	0	-
Cl.22.7 of IS 302-1:2008(Construction)	-	0	-
Cl.22.8 of IS 302-1:2008(Construction)	-	0	-
Cl.22.9 of IS 302-1:2008(Construction)	-	0	-
Cl.22.11(Construction)	-	0	-
Cl.22.12 of IS 302-1:2008(Construction)	-	0	-
Cl.22.13 of IS 302-1:2008(Construction)	-	0	-
Cl.22.14 of IS 302-1:2008(Construction)	-	0	-
Cl.22.15 of IS 302-1:2008(Construction)	-	0	-
Cl.22.18 of IS 302-1:2008(Construction)	-	0	-
Cl.22.20 of IS 302-1:2008(Construction)	-	0	-
Cl.22.21 of IS 302-1:2008(Construction)	-	0	-
Cl.23 & IS:302-1:2008(Internal Wiring )	-	1000	-
Cl.23.4 & Cl.29 of 302-1:2008(Internal Wiring )	-	0	-
Cl.23.5 of 302-1:2008(Internal Wiring )	-	0	-
Cl.23.7 of 302-1:2008(Internal Wiring )	-	0	-
C.23.7 of 302-1:2008(Internal Wiring )	-	0	-
Cl.24.1 of 302-1:2008(Component)	-	1000	-
Cl.24.1 of 302-1:2008(Component)	-	0	-
Cl.24.1.3 (Component)	-	0	-
Cl.24.1.3 (Component)	-	0	-
Cl.24.1.3 (Component)	-	0	-
Cl.24.1.3 (Component)	-	0	-
C.24.1.4(Component)	-	0	-
C.24.2 of 302-1:2008(Component)	-	0	-
Cl.24.10(Component)	-	0	-
Cl.25.1 of 302-1:2008(Supply Connection and External Flexible Cords )	-	1000	-
Cl. 25.2 of IS 3021:2008(Supply Connection and External Flexible Cords )	-	0	-
Cl. 25.3 of IS 302-1:2008(Supply Connection and External Flexible Cords )	-	0	-
Cl. 25.4 of IS 302-1:2008(Supply Connection and External Flexible Cords )	-	0	-
Cl.25.5 of 302-1:2008(Supply Connection and External Flexible Cords )	-	0	-
Cl.25.6 of 302-1:2008(Supply Connection and External Flexible Cords )	-	0	-
Cl.25.7.(Supply Connection and External Flexible Cords )	-	0	-
Cl.25.8(Supply Connection and External Flexible Cords )	-	0	-
Cl. 25.9(Supply Connection and External Flexible Cords )	-	0	-
Cl.25.10 of 302-1:2008(Supply Connection and External Flexible Cords )	-	0	-
Cl. 25.11(Supply Connection and External Flexible Cords )	-	0	-
Cl. 25.12(Supply Connection and External Flexible Cords )	-	0	-
Cl. 25.13(Supply Connection and External Flexible Cords )	-	0	-
Cl.25.14 of IS 302-1:2008(Supply Connection and External Flexible Cords )	-	0	-
Cl.25.15 of IS 302-1:2008(Supply Connection and External Flexible Cords )	-	0	-
Cl.25.15 of IS 302-1:2008(Supply Connection and External Flexible Cords )	-	0	-
Cl.25.17 of IS 302-1:2008(Supply Connection and External Flexible Cords )	-	0	-
Cl.25.18(Supply Connection and External Flexible Cords )	-	0	-
Cl.25.20(Supply Connection and External Flexible Cords )	-	0	-
Cl.26.1 of IS 302-1:2008(Terminal for External Conductors )	-	500	-
Cl.26.10 of IS 302-1:2008(Terminal for External Conductors )	-	0	-
Cl.26.11 of IS 302-1:2008(Terminal for External Conductors )	-	0	-
Cl.27.1 of 302-1:2008(Provision for Earthing.)	-	1000	-
Cl.27.5 of 302-1:2008(Provision for Earthing.)	-	0	-
Cl.28 of 302-1:2008(Screws and Connections.)	-	500	-
Cl.29 & IS:302-1:2008(Clearances, Creepage Distances and Solid Insulation)	-	500	-
Cl.29 & IS:302-1:2008(Clearances, Creepage Distances and Solid Insulation)	-	0	-
Cl.30 & IS:302-1:2008(Resistance to Heat and Fire)	-	2000	-
Cl.30.2.2 of 302-1:2008(Resistance to Heat and Fire)	-	0	-
Cl.31 & IS:302-1:2008(Resistance to Rusting.)	-	500	-
Cl.32 & IS:302-1:2008(Radition,Toxicity and similar Hazards.)	-	0	-
Cl.31 of IS:302-1:2008(Resistance to Rusting.)	-	0	-
Cl.30.2 of 302-1:2008(Resistance to Heat and Fire : Resistance to fire)	-	0	-
Cl.30.1 of IS:302-1:2008(Resistance to Heat and Fire: Resistance to heat. )	-	0	-
Cl.29.2 of IS:302-1:2008(Clearances, Creepage Distances and Solid Insulation : Creepage Distance)	-	0	-
Cl.29.1 of IS:302-1:2008(Clearances, Creepage Distances and Solid Insulation : Clearance )	-	0	-
Cl.28 of 302-1:2008(Screws and Connections.)	-	0	-
Cl.27.5 of 302-1:2008(Provision for Earthing : ECR)	-	0	-
Cl.27.1 of 302-1:2008(Provision for Earthing )	-	0	-
Cl.26 of IS 302-1:2008(Terminal for External Conductors )	-	0	-
Cl.25.20 of 302-1:2008(Supply Connection and External Flexible Cords : Additional insulation )	-	0	-
Cl.25.18 of 302-1:2008(Supply Connection and External Flexible Cords : Arrangement of cord anchorages )	-	0	-
Cl.25.15 of IS 302-1:2008(Supply Connection and External Flexible Cords : Cord grip test - displacement)	-	0	-
Cl.25.15 of IS 302-1:2008(Supply Connection and External Flexible Cords : Cord grip test - strain at terminals )	-	0	-
Cl. 25.12 of 302-1:2008(Supply Connection and External Flexible Cords : Moulding of cords )	-	0	-
Cl.25.10 of 302-1:2008(Supply Connection and External Flexible Cords : Colour of earthing wire )	-	0	-
Cl. 25.9 of 302-1:2008(Supply Connection and External Flexible Cords : Contact with sharp edge )	-	0	-
Cl.25.8 of 302-1:2008(Supply Connection and External Flexible Cords : Resistance of supply wires )	-	0	-
Cl.25.7 of IS:302-2-30:2007(Supply Connection and External Flexible Cords : Supply cords material )	-	0	-
Cl.25.5 of 302-1:2008(Supply Connection and External Flexible Cords : Type of attachments )	-	0	-
Cl.25.1 of 302-1:2008(Supply Connection and External Flexible Cords : Means of connection )	-	0	-
Cl.24 of IS:302-2-30:2007(Component)	-	0	-
Cl.23.7 of 302-1:2008(Internal Wiring : Colour of earting conductor )	-	0	-
Cl.23 of IS:302-1:2008(Internal Wiring )	-	0	-
Cl.22.106 of IS:302-2-30:2007(Construction : Checking of thermostats, timers or similar means for visibl glowing radiant heaters)	-	0	-
Cl.22.106 of IS:302-2-30:2007(Construction : Checking of openings on the underside)	-	0	-
Cl.22.102 & Cl 22.103 of IS:302-2-30:2007(Construction : Fireguard )	-	0	-
Cl.22.101 of IS:302-2-30:2007(Construction : Prevention to contact with heating element)	-	0	-
Cl.22.24 of IS:302-2-30:2007(Construction : test of bare heating element)	-	0	-
Cl.22.18 of IS 302-1:2008(Construction : Resistance to corrosion )	-	0	-
Cl.22.15 of IS 302-1:2008(Construction : Storage hooks for flexible cords)	-	0	-
Cl.22.14 of IS 302-1:2008(Construction : ragged and sharp edges)	-	0	-
Cl.22.13 of IS 302-1:2008(Construction : Position of handles )	-	0	-
Cl.22.12 of IS 302-1:2008(Construction : Fixing of Handle, knobs,grips,lever and similer parts )	-	0	-
Cl.22.11 of IS 302-1:2008(Construction : Fixing of non detachable parts )	-	0	-
Cl.22.7 of IS:302-2-30:2007(Construction : Pressure test of oil heater )	-	0	-
Cl.21.101 of IS:302-2-30:2007(Mechanical Strength : fire gaurd deformation test )	-	0	-
Cl.21.2 of IS 302-1:2008(Mechanical Strength : Pentration by sharp implementation )	-	0	-
Cl.21.1 of IS:302-1:2008)(Mechanical Strength : Rough handling )	-	0	-
Cl.20 of IS:302-2-30:2007(Stability of Mechanical Hazards)	-	0	-
Cl.19.114 of IS:302-2-30:2007(Abnormal Operation : the temp. of the surface of the container for oil heaters )	-	0	-
Cl.19.112 of IS:302-2-30:2007(Abnormal Operation : Ignition of bleached cotton gauge)	-	0	-
Cl.19.111 of IS:302-2-30:2007(Abnormal Operation : Ignition of flannelette for Visibly glowing heaters)	-	0	-
Cl.19.110 of IS:302-2-30:2007(Abnormal Operation : operation against wall for visibly glowing radiant heaters )	-	0	-
Cl.19.109 of IS:302-2-30:2007(Abnormal Operation : operation against wall for fan heater )	-	0	-
Cl.19.106 of IS:302-2-30:2007(Abnormal Operation : Locked rotor of fan hetear )	-	0	-
Cl.19.103 , Cl 19.104 of IS:302-2-30:2007(Abnormal Operation : Operation after Covering by cotton)	-	0	-
Cl.19 of IS:302-2-30:2007(Abnormal Operation : High Voltage )	-	0	-
Cl.19 of IS:302-2-30:2007(Abnormal Operation : temp rise of supply cord )	-	0	-
Cl.19 of IS:302-2-30:2007(Abnormal Operation : Temp rise of test corner )	-	0	-
Cl.19 of IS:302-1:2008(Abnormal Operation : Emission of molten or poisonous or ignitable gas)	-	0	-
Cl.16 of IS:302-1:2008(Leakage current and Electric strength (After humidity): Electric Strentgh )	-	0	-
Cl.15 of IS 302-1:2008(Moisture Resistance )	-	0	-
Cl.14 of IS:302-1:2008(Transient Over Voltages)	-	0	-
Cl.13 of IS:302-1:2008(Leakage Current of Electric Strength at operating temp. )	-	0	-
Cl.13 of IS:302-1:2008(Leakage Current of Electric Strength at operating temp. )	-	0	-
Cl.11 of IS:302-2:30: 2007(Heating : Room temperature)	-	0	-
Cl.11.8 of IS:302-2:30: 2007(Heating : For liquid filled radiators the temp. rise of the outer surface of the liquid container)	-	0	-
Cl.11 of IS:302-2:30: 2007(Heating : Temperature rise in winding)	-	0	-
Cl.11 of IS:302-2:30: 2007(Heating : Air-outlet grills)	-	0	-
Cl.11 of IS:302-2:30: 2007(Heating : Surfaces of handles, knobs, grips and similar parts)	-	0	-
Cl.11 of IS:302-2:30: 2007(Heating : Wooden supports, walls, ceiling and floor of the test corner)	-	0	-
Cl.11 of IS:302-2:30: 2007(Heating : PVC Insulation )	-	0	-
Cl.10 of IS:302-1:2008(Power Input and Current)	-	0	-
Cl.8 of IS:302-1:2008(Protection Against Access to Live Parts)	-	0	-
Cl.7.101 of IS:302-2:30: 2007(Marking and Instructions : standard mark. )	-	0	-
Cl.7.15 of IS 302-1:2008(Marking and Instructions : Visibility of marking concerning covering)	-	0	-
Cl.7.15 of IS 302-1:2008(Marking and Instructions : discernibility from the out side )	-	0	-
Cl.7.14 of IS:302-2:30: 2007(Marking and Instructions : Height of “Do not cover”)	-	0	-
Cl.16 of IS:302-1:2008(Leakage current and Electric strength (After humidity): Leakage current )	-	0	-
Cl.7.14 of IS:302-2:30: 2007(Marking and Instructions : height of symbol)	-	0	-
Cl.7.14 of IS302-1:2008(Marking and Instructions : Legibility and durability )	-	0	-
Cl.7.13 of IS 302-1:2008(Marking and Instructions : Languge of instruction and texts )	-	0	-
Cl.7.11 of IS :302-1:2008(Marking and Instructions : Controls )	-	0	-
Cl.7.9 of IS :302-1:2008(Marking and Instructions : switches )	-	0	-
Cl.7.8 of IS :302-1:2008(Marking and Instructions : terminals )	-	0	-
Cl.7.6 of IS:302-1:2008(Marking and Instructions : Symbols )	-	0	-
Cl.7.5 of IS:302-1:2008(Marking and Instructions : upper of lower limit of the rated power input )	-	0	-
Cl 7.1 & Cl.7.6 of IS:302-2:30: 2007(Marking and Instructions : Do not cover )	-	0	-
Cl.7.1 of IS:302-1:2008(Marking and Instructions : Country of manufacture )	-	0	-
Cl.7.1 of IS:302-1:2008(Marking and Instructions : Symbol for Class-II )	-	0	-
Cl.7.1 of IS:302-1:2008(Marking and Instructions : Model or type )	-	0	-
Cl.7.1 of IS:302-1:2008(Marking and Instructions : Name , trade-mark or identification mark of the manufacturer )	-	0	-
Cl.7.1 of IS:302-1:2008(Marking and Instructions : rated power input )	-	0	-
Cl.7.1 of IS:302-1:2008(Marking and Instructions : Nature of supply )	-	0	-
Cl.7.1 of IS:302-1:2008(Marking and Instructions : Rated Voltage )	-	0	-
19.11.4.1(Electrostatic discharges)	-	0	-
19.11.4.2(Radiated fields)	-	0	-
19.11.4.3(Fast transient bursts)	-	0	-
19.11.4.4(Surge immunity test)	-	0	-
19.11.4.5(Injected currents)	-	0	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	0	-
19.11.4.7(Harmonics)	-	0	-
Cl. 25.13 of 302-1:2008(Supply Connection and External Flexible Cords : Inlet opening of supply cords )	-	0	-
Cl.6 (Classification)	-	0	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.6 (Classification)	-	0	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7(Marking and Instructions)	-	0	-
Cl.7(Marking and Instructions)	-	0	-
Cl.7(Marking and Instructions)	-	0	-
Cl.7.3(Marking and Instructions)	-	0	-
Cl.7.3(Marking and Instructions)	-	0	-
Cl.7.3(Marking and Instructions)	-	0	-
Cl.7.4(Marking and Instructions)	-	0	-
Cl.7.5(Marking and Instructions)	-	0	-
Cl.7.6 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.8 of IS :302-1:2008(Marking and Instructions)	-	0	-
Cl.7.9 of IS :302-1:2008(Marking and Instructions)	-	0	-
Cl.7.10 of IS :302-1:2008(Marking and Instructions)	-	0	-
Cl.7.11 of IS :302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12.1 & IS:302-1:2009(Marking and Instructions)	-	0	-
Cl.7.13 of IS 302-1:2008(Marking and Instructions)	-	0	-
Cl.7.14 of IS302-1:2008(Marking and Instructions)	-	0	-
Cl.7.14(Marking and Instructions)	-	0	-
Cl.7.14(Marking and Instructions)	-	0	-
Cl.7.15 of IS 302-1:2008(Marking and Instructions)	-	0	-
Cl.7.15 of IS 302-1:2008(Marking and Instructions)	-	0	-
Cl.7.15 of IS 302-1:2008(Marking and Instructions)	-	0	-
Cl.7.15 of IS 302-1:2008(Marking and Instructions)	-	0	-
Cl.7.101(Marking and Instructions)	-	0	-
Cl.8 & IS:302-1:2008(Protection Against Access to Live Parts)	-	0	-
Cl.10 & IS:302-1:2008(Power Input and Current)	-	0	-
Cl.11 & IS:302-1:2008(Heating)	-	0	-
Cl.11 & IS:302-1:2008(Heating)	-	0	-
Cl.11 & IS:302-1:2008(Heating)	-	0	-
Cl.11 & IS:302-1:2008(Heating)	-	0	-
Cl.11 & IS:302-1:2008(Heating)	-	0	-
Cl.11 & IS:302-1:2008(Heating)	-	0	-
Cl.11 & IS:302-1:2008(Heating)	-	0	-
Cl.11 & IS:302-1:2008(Heating)	-	0	-
Cl.11 & IS:302-1:2008(Heating)	-	0	-
Cl.11 & IS:302-1:2008(Heating)	-	0	-
Cl.11 & IS:302-1:2008(Heating)	-	0	-
Cl.11 & IS:302-1:2008(Heating)	-	0	-
Cl.11 & IS:302-1:2008(Heating)	-	0	-
Cl.11 & IS:302-1:2008(Heating)	-	0	-
Cl.11 & IS:302-1:2008(Heating)	-	0	-
Cl.11 & IS:302-1:2008(Heating)	-	0	-
Cl.11.8(Heating)	-	0	-
Cl.11.8(Heating)	-	0	-
Cl.11.8(Heating)	-	0	-
Cl.13 & IS:302-1:2008(Leakage Current & Electric Strength at operating temp. )	-	0	-
Cl.13 & IS:302-1:2008(Leakage Current & Electric Strength at operating temp. )	-	0	-
Cl.14 & IS:302-1:2008(Transient Over Voltages)	-	0	-
Cl.15 & IS: 302-1:2008(Moisture Resistance )	-	0	-
Cl.15.3 of IS 302-1:200(Moisture Resistance )	-	0	-
Cl.16 & IS:302-1:2008(Leakage Current & Electric Strength )	-	0	-
Cl.16 & IS:302-1:2008(Leakage Current & Electric Strength )	-	0	-
Cl.17 & IS:302-1:2008(Over load Protection of Transformers and Associated Circuits )	-	0	-
Cl.18 (Endurance. )	-	0	-
Cl.19 & IS:302-1:2008(Abnormal Operation.)	-	0	-
Cl.19 & IS:302-1:2008(Abnormal Operation.)	-	0	-
Cl.19 & IS:302-1:2008(Abnormal Operation.)	-	0	-
Cl.19 & IS:302-1:2008(Abnormal Operation.)	-	0	-
Cl.19.101(Abnormal Operation.)	-	0	-
Cl.19.102(Abnormal Operation.)	-	0	-
Cl.19.103(Abnormal Operation.)	-	0	-
Cl.19.104(Abnormal Operation.)	-	0	-
Cl.19.105(Abnormal Operation.)	-	0	-
Cl.19.106(Abnormal Operation.)	-	0	-
Table 8 of IS 302-1:2008(Abnormal Operation.)	-	0	-
Cl.19.107(Abnormal Operation.)	-	0	-
Cl.19.108(Abnormal Operation.)	-	0	-
Cl.19.109(Abnormal Operation.)	-	0	-
Cl.19.110(Abnormal Operation.)	-	0	-
Cl.19.111(Abnormal Operation.)	-	0	-
Cl.19.112(Abnormal Operation.)	-	0	-
Cl.19.113(Abnormal Operation.)	-	0	-
Cl.19.114(Abnormal Operation.)	-	0	-
Cl.20 & IS:302-1:2008(Stability & Mechanical Hazards)	-	0	-
Cl.21 & IS:302-1:2008)(Mechanical Strength.)	-	0	-
Cl.21.2 of IS 302-1:2008(Mechanical Strength.)	-	0	-
Cl.21.101 (Mechanical Strength.)	-	0	-
Cl.21.102(Mechanical Strength.)	-	0	-
Cl.21.103(Mechanical Strength.)	-	0	-
Cl.22.1 of IS 302-1:2008(Construction)	-	0	-
Cl.22.5 of IS 302-1:2008(Construction)	-	0	-
Cl.22.6 of IS 302-1:2008(Construction)	-	0	-
Cl.22.7 of IS 302-1:2008(Construction)	-	0	-
Cl.22.8 of IS 302-1:2008(Construction)	-	0	-
Cl.22.9 of IS 302-1:2008(Construction)	-	0	-
Cl.22.11(Construction)	-	0	-
Cl.22.12 of IS 302-1:2008(Construction)	-	0	-
Cl.22.13 of IS 302-1:2008(Construction)	-	0	-
Cl.22.14 of IS 302-1:2008(Construction)	-	0	-
Cl.22.15 of IS 302-1:2008(Construction)	-	0	-
Cl.22.18 of IS 302-1:2008(Construction)	-	0	-
Cl.22.20 of IS 302-1:2008(Construction)	-	0	-
Cl.22.21 of IS 302-1:2008(Construction)	-	0	-
Cl.23 & IS:302-1:2008(Internal Wiring )	-	0	-
Cl.23.4 & Cl.29 of 302-1:2008(Internal Wiring )	-	0	-
Cl.23.5 of 302-1:2008(Internal Wiring )	-	0	-
Cl.23.7 of 302-1:2008(Internal Wiring )	-	0	-
C.23.7 of 302-1:2008(Internal Wiring )	-	0	-
Cl.24.1 of 302-1:2008(Component)	-	0	-
Cl.24.1 of 302-1:2008(Component)	-	0	-
Cl.24.1.3 (Component)	-	0	-
Cl.24.1.3 (Component)	-	0	-
Cl.24.1.3 (Component)	-	0	-
Cl.24.1.3 (Component)	-	0	-
C.24.1.4(Component)	-	0	-
C.24.2 of 302-1:2008(Component)	-	0	-
Cl.24.10(Component)	-	0	-
Cl.25.1 of 302-1:2008(Supply Connection and External Flexible Cords )	-	0	-
Cl. 25.2 of IS 3021:2008(Supply Connection and External Flexible Cords )	-	0	-
Cl. 25.3 of IS 302-1:2008(Supply Connection and External Flexible Cords )	-	0	-
Cl. 25.4 of IS 302-1:2008(Supply Connection and External Flexible Cords )	-	0	-
Cl.25.5 of 302-1:2008(Supply Connection and External Flexible Cords )	-	0	-
Cl.25.6 of 302-1:2008(Supply Connection and External Flexible Cords )	-	0	-
Cl.25.7.(Supply Connection and External Flexible Cords )	-	0	-
Cl.25.8(Supply Connection and External Flexible Cords )	-	0	-
Cl. 25.9(Supply Connection and External Flexible Cords )	-	0	-
Cl.25.10 of 302-1:2008(Supply Connection and External Flexible Cords )	-	0	-
Cl. 25.11(Supply Connection and External Flexible Cords )	-	0	-
Cl. 25.12(Supply Connection and External Flexible Cords )	-	0	-
Cl. 25.13(Supply Connection and External Flexible Cords )	-	0	-
Cl.25.14 of IS 302-1:2008(Supply Connection and External Flexible Cords )	-	0	-
Cl.25.15 of IS 302-1:2008(Supply Connection and External Flexible Cords )	-	0	-
Cl.25.15 of IS 302-1:2008(Supply Connection and External Flexible Cords )	-	0	-
Cl.25.17 of IS 302-1:2008(Supply Connection and External Flexible Cords )	-	0	-
Cl.25.18(Supply Connection and External Flexible Cords )	-	0	-
Cl.25.20(Supply Connection and External Flexible Cords )	-	0	-
Cl.26.1 of IS 302-1:2008(Terminal for External Conductors )	-	0	-
Cl.26.10 of IS 302-1:2008(Terminal for External Conductors )	-	0	-
Cl.26.11 of IS 302-1:2008(Terminal for External Conductors )	-	0	-
Cl.27.1 of 302-1:2008(Provision for Earthing.)	-	0	-
Cl.27.5 of 302-1:2008(Provision for Earthing.)	-	0	-
Cl.28 of 302-1:2008(Screws and Connections.)	-	0	-
Cl.29 & IS:302-1:2008(Clearances, Creepage Distances and Solid Insulation)	-	0	-
Cl.29 & IS:302-1:2008(Clearances, Creepage Distances and Solid Insulation)	-	0	-
Cl.30 & IS:302-1:2008(Resistance to Heat and Fire)	-	0	-
Cl.30.2.2 of 302-1:2008(Resistance to Heat and Fire)	-	0	-
Cl.31 & IS:302-1:2008(Resistance to Rusting.)	-	0	-
Cl.32 & IS:302-1:2008(Radition,Toxicity and similar Hazards.)	-	0	-
19.11.4.1(Electrostatic discharges)	-	0	-
19.11.4.2(Radiated fields)	-	0	-
19.11.4.3(Fast transient bursts)	-	0	-
19.11.4.4(Surge immunity test)	-	0	-
19.11.4.5(Injected currents)	-	0	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	0	-
19.11.4.7(Harmonics)	-	0	-
Cl.6 (Classification)	-	0	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.6 (Classification)	-	0	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7(Marking and Instructions)	-	0	-
Cl.7(Marking and Instructions)	-	0	-
Cl.7(Marking and Instructions)	-	0	-
Cl.7.3(Marking and Instructions)	-	0	-
Cl.7.3(Marking and Instructions)	-	0	-
Cl.7.3(Marking and Instructions)	-	0	-
Cl.7.4(Marking and Instructions)	-	0	-
Cl.7.5(Marking and Instructions)	-	0	-
Cl.7.6 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.8 of IS :302-1:2008(Marking and Instructions)	-	0	-
Cl.7.9 of IS :302-1:2008(Marking and Instructions)	-	0	-
Cl.7.10 of IS :302-1:2008(Marking and Instructions)	-	0	-
Cl.7.11 of IS :302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12.1 & IS:302-1:2009(Marking and Instructions)	-	0	-
Cl.7.13 of IS 302-1:2008(Marking and Instructions)	-	0	-
Cl.7.14 of IS302-1:2008(Marking and Instructions)	-	0	-
Cl.7.14(Marking and Instructions)	-	0	-
Cl.7.14(Marking and Instructions)	-	0	-
Cl.7.15 of IS 302-1:2008(Marking and Instructions)	-	0	-
Cl.7.15 of IS 302-1:2008(Marking and Instructions)	-	0	-
Cl.7.15 of IS 302-1:2008(Marking and Instructions)	-	0	-
Cl.7.15 of IS 302-1:2008(Marking and Instructions)	-	0	-
Cl.7.101(Marking and Instructions)	-	0	-
Cl.8 & IS:302-1:2008(Protection Against Access to Live Parts)	-	0	-
Cl.10 & IS:302-1:2008(Power Input and Current)	-	0	-
Cl.11 & IS:302-1:2008(Heating)	-	0	-
Cl.11 & IS:302-1:2008(Heating)	-	0	-
Cl.11 & IS:302-1:2008(Heating)	-	0	-
Cl.11 & IS:302-1:2008(Heating)	-	0	-
Cl.11 & IS:302-1:2008(Heating)	-	0	-
Cl.11 & IS:302-1:2008(Heating)	-	0	-
Cl.11 & IS:302-1:2008(Heating)	-	0	-
Cl.11 & IS:302-1:2008(Heating)	-	0	-
Cl.11 & IS:302-1:2008(Heating)	-	0	-
Cl.11 & IS:302-1:2008(Heating)	-	0	-
Cl.11 & IS:302-1:2008(Heating)	-	0	-
Cl.11 & IS:302-1:2008(Heating)	-	0	-
Cl.11 & IS:302-1:2008(Heating)	-	0	-
Cl.11 & IS:302-1:2008(Heating)	-	0	-
Cl.11 & IS:302-1:2008(Heating)	-	0	-
Cl.11 & IS:302-1:2008(Heating)	-	0	-
Cl.11.8(Heating)	-	0	-
Cl.11.8(Heating)	-	0	-
Cl.11.8(Heating)	-	0	-
Cl.13 & IS:302-1:2008(Leakage Current & Electric Strength at operating temp. )	-	0	-
Cl.13 & IS:302-1:2008(Leakage Current & Electric Strength at operating temp. )	-	0	-
Cl.14 & IS:302-1:2008(Transient Over Voltages)	-	0	-
Cl.15 & IS: 302-1:2008(Moisture Resistance )	-	0	-
Cl.15.3 of IS 302-1:200(Moisture Resistance )	-	0	-
Cl.16 & IS:302-1:2008(Leakage Current & Electric Strength )	-	0	-
Cl.16 & IS:302-1:2008(Leakage Current & Electric Strength )	-	0	-
Cl.17 & IS:302-1:2008(Over load Protection of Transformers and Associated Circuits )	-	0	-
Cl.18 (Endurance. )	-	0	-
Cl.19 & IS:302-1:2008(Abnormal Operation.)	-	0	-
Cl.19 & IS:302-1:2008(Abnormal Operation.)	-	0	-
Cl.19 & IS:302-1:2008(Abnormal Operation.)	-	0	-
Cl.19 & IS:302-1:2008(Abnormal Operation.)	-	0	-
Cl.19.101(Abnormal Operation.)	-	0	-
Cl.19.102(Abnormal Operation.)	-	0	-
Cl.19.103(Abnormal Operation.)	-	0	-
Cl.19.104(Abnormal Operation.)	-	0	-
Cl.19.105(Abnormal Operation.)	-	0	-
Cl.19.106(Abnormal Operation.)	-	0	-
Table 8 of IS 302-1:2008(Abnormal Operation.)	-	0	-
Cl.19.107(Abnormal Operation.)	-	0	-
Cl.19.108(Abnormal Operation.)	-	0	-
Cl.19.109(Abnormal Operation.)	-	0	-
Cl.19.110(Abnormal Operation.)	-	0	-
Cl.19.111(Abnormal Operation.)	-	0	-
Cl.19.112(Abnormal Operation.)	-	0	-
Cl.19.113(Abnormal Operation.)	-	0	-
Cl.19.114(Abnormal Operation.)	-	0	-
Cl.20 & IS:302-1:2008(Stability & Mechanical Hazards)	-	0	-
Cl.21 & IS:302-1:2008)(Mechanical Strength.)	-	0	-
Cl.21.2 of IS 302-1:2008(Mechanical Strength.)	-	0	-
Cl.21.101 (Mechanical Strength.)	-	0	-
Cl.21.102(Mechanical Strength.)	-	0	-
Cl.21.103(Mechanical Strength.)	-	0	-
Cl.22.1 of IS 302-1:2008(Construction)	-	0	-
Cl.22.5 of IS 302-1:2008(Construction)	-	0	-
Cl.22.6 of IS 302-1:2008(Construction)	-	0	-
Cl.22.7 of IS 302-1:2008(Construction)	-	0	-
Cl.22.8 of IS 302-1:2008(Construction)	-	0	-
Cl.22.9 of IS 302-1:2008(Construction)	-	0	-
Cl.22.11(Construction)	-	0	-
Cl.22.12 of IS 302-1:2008(Construction)	-	0	-
Cl.22.13 of IS 302-1:2008(Construction)	-	0	-
Cl.22.14 of IS 302-1:2008(Construction)	-	0	-
Cl.22.15 of IS 302-1:2008(Construction)	-	0	-
Cl.22.18 of IS 302-1:2008(Construction)	-	0	-
Cl.22.20 of IS 302-1:2008(Construction)	-	0	-
Cl.22.21 of IS 302-1:2008(Construction)	-	0	-
Cl.23 & IS:302-1:2008(Internal Wiring )	-	0	-
Cl.23.4 & Cl.29 of 302-1:2008(Internal Wiring )	-	0	-
Cl.23.5 of 302-1:2008(Internal Wiring )	-	0	-
Cl.23.7 of 302-1:2008(Internal Wiring )	-	0	-
C.23.7 of 302-1:2008(Internal Wiring )	-	0	-
Cl.24.1 of 302-1:2008(Component)	-	0	-
Cl.24.1 of 302-1:2008(Component)	-	0	-
Cl.24.1.3 (Component)	-	0	-
Cl.24.1.3 (Component)	-	0	-
Cl.24.1.3 (Component)	-	0	-
Cl.24.1.3 (Component)	-	0	-
C.24.1.4(Component)	-	0	-
C.24.2 of 302-1:2008(Component)	-	0	-
Cl.24.10(Component)	-	0	-
Cl.25.1 of 302-1:2008(Supply Connection and External Flexible Cords )	-	0	-
Cl. 25.2 of IS 3021:2008(Supply Connection and External Flexible Cords )	-	0	-
Cl. 25.3 of IS 302-1:2008(Supply Connection and External Flexible Cords )	-	0	-
Cl. 25.4 of IS 302-1:2008(Supply Connection and External Flexible Cords )	-	0	-
Cl.25.5 of 302-1:2008(Supply Connection and External Flexible Cords )	-	0	-
Cl.25.6 of 302-1:2008(Supply Connection and External Flexible Cords )	-	0	-
Cl.25.7.(Supply Connection and External Flexible Cords )	-	0	-
Cl.25.8(Supply Connection and External Flexible Cords )	-	0	-
Cl. 25.9(Supply Connection and External Flexible Cords )	-	0	-
Cl.25.10 of 302-1:2008(Supply Connection and External Flexible Cords )	-	0	-
Cl. 25.11(Supply Connection and External Flexible Cords )	-	0	-
Cl. 25.12(Supply Connection and External Flexible Cords )	-	0	-
Cl. 25.13(Supply Connection and External Flexible Cords )	-	0	-
Cl.25.14 of IS 302-1:2008(Supply Connection and External Flexible Cords )	-	0	-
Cl.25.15 of IS 302-1:2008(Supply Connection and External Flexible Cords )	-	0	-
Cl.25.15 of IS 302-1:2008(Supply Connection and External Flexible Cords )	-	0	-
Cl.25.17 of IS 302-1:2008(Supply Connection and External Flexible Cords )	-	0	-
Cl.25.18(Supply Connection and External Flexible Cords )	-	0	-
Cl.25.20(Supply Connection and External Flexible Cords )	-	0	-
Cl.26.1 of IS 302-1:2008(Terminal for External Conductors )	-	0	-
Cl.26.10 of IS 302-1:2008(Terminal for External Conductors )	-	0	-
Cl.26.11 of IS 302-1:2008(Terminal for External Conductors )	-	0	-
Cl.27.1 of 302-1:2008(Provision for Earthing.)	-	0	-
Cl.27.5 of 302-1:2008(Provision for Earthing.)	-	0	-
Cl.28 of 302-1:2008(Screws and Connections.)	-	0	-
Cl.29 & IS:302-1:2008(Clearances, Creepage Distances and Solid Insulation)	-	0	-
Cl.29 & IS:302-1:2008(Clearances, Creepage Distances and Solid Insulation)	-	0	-
Cl.30 & IS:302-1:2008(Resistance to Heat and Fire)	-	0	-
Cl.30.2.2 of 302-1:2008(Resistance to Heat and Fire)	-	0	-
Cl.31 & IS:302-1:2008(Resistance to Rusting.)	-	0	-
Cl.32 & IS:302-1:2008(Radition,Toxicity and similar Hazards.)	-	0	-
19.11.4.1(Electrostatic discharges)	-	0	-
19.11.4.2(Radiated fields)	-	0	-
19.11.4.3(Fast transient bursts)	-	0	-
19.11.4.4(Surge immunity test)	-	0	-
19.11.4.5(Injected currents)	-	0	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	0	-
19.11.4.7(Harmonics)	-	0	-
Cl.6 (Classification)	-	0	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.6 (Classification)	-	0	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7(Marking and Instructions)	-	0	-
Cl.7(Marking and Instructions)	-	0	-
Cl.7(Marking and Instructions)	-	0	-
Cl.7.3(Marking and Instructions)	-	0	-
Cl.7.3(Marking and Instructions)	-	0	-
Cl.7.3(Marking and Instructions)	-	0	-
Cl.7.4(Marking and Instructions)	-	0	-
Cl.7.5(Marking and Instructions)	-	0	-
Cl.7.6 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.8 of IS :302-1:2008(Marking and Instructions)	-	0	-
Cl.7.9 of IS :302-1:2008(Marking and Instructions)	-	0	-
Cl.7.10 of IS :302-1:2008(Marking and Instructions)	-	0	-
Cl.7.11 of IS :302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12.1 & IS:302-1:2009(Marking and Instructions)	-	0	-
Cl.7.13 of IS 302-1:2008(Marking and Instructions)	-	0	-
Cl.7.14 of IS302-1:2008(Marking and Instructions)	-	0	-
Cl.7.14(Marking and Instructions)	-	0	-
Cl.7.14(Marking and Instructions)	-	0	-
Cl.7.15 of IS 302-1:2008(Marking and Instructions)	-	0	-
Cl.7.15 of IS 302-1:2008(Marking and Instructions)	-	0	-
Cl.7.15 of IS 302-1:2008(Marking and Instructions)	-	0	-
Cl.7.15 of IS 302-1:2008(Marking and Instructions)	-	0	-
Cl.7.101(Marking and Instructions)	-	0	-
Cl.8 & IS:302-1:2008(Protection Against Access to Live Parts)	-	0	-
Cl.10 & IS:302-1:2008(Power Input and Current)	-	0	-
Cl.11 & IS:302-1:2008(Heating)	-	0	-
Cl.11 & IS:302-1:2008(Heating)	-	0	-
Cl.11 & IS:302-1:2008(Heating)	-	0	-
Cl.11 & IS:302-1:2008(Heating)	-	0	-
Cl.11 & IS:302-1:2008(Heating)	-	0	-
Cl.11 & IS:302-1:2008(Heating)	-	0	-
Cl.11 & IS:302-1:2008(Heating)	-	0	-
Cl.11 & IS:302-1:2008(Heating)	-	0	-
Cl.11 & IS:302-1:2008(Heating)	-	0	-
Cl.11 & IS:302-1:2008(Heating)	-	0	-
Cl.11 & IS:302-1:2008(Heating)	-	0	-
Cl.11 & IS:302-1:2008(Heating)	-	0	-
Cl.11 & IS:302-1:2008(Heating)	-	0	-
Cl.11 & IS:302-1:2008(Heating)	-	0	-
Cl.11 & IS:302-1:2008(Heating)	-	0	-
Cl.11 & IS:302-1:2008(Heating)	-	0	-
Cl.11.8(Heating)	-	0	-
Cl.11.8(Heating)	-	0	-
Cl.11.8(Heating)	-	0	-
Cl.13 & IS:302-1:2008(Leakage Current & Electric Strength at operating temp. )	-	0	-
Cl.13 & IS:302-1:2008(Leakage Current & Electric Strength at operating temp. )	-	0	-
Cl.14 & IS:302-1:2008(Transient Over Voltages)	-	0	-
Cl.15 & IS: 302-1:2008(Moisture Resistance )	-	0	-
Cl.15.3 of IS 302-1:200(Moisture Resistance )	-	0	-
Cl.16 & IS:302-1:2008(Leakage Current & Electric Strength )	-	0	-
Cl.16 & IS:302-1:2008(Leakage Current & Electric Strength )	-	0	-
Cl.17 & IS:302-1:2008(Over load Protection of Transformers and Associated Circuits )	-	0	-
Cl.18 (Endurance. )	-	0	-
Cl.19 & IS:302-1:2008(Abnormal Operation.)	-	0	-
Cl.19 & IS:302-1:2008(Abnormal Operation.)	-	0	-
Cl.19 & IS:302-1:2008(Abnormal Operation.)	-	0	-
Cl.19 & IS:302-1:2008(Abnormal Operation.)	-	0	-
Cl.19.101(Abnormal Operation.)	-	0	-
Cl.19.102(Abnormal Operation.)	-	0	-
Cl.19.103(Abnormal Operation.)	-	0	-
Cl.19.104(Abnormal Operation.)	-	0	-
Cl.19.105(Abnormal Operation.)	-	0	-
Cl.19.106(Abnormal Operation.)	-	0	-
Table 8 of IS 302-1:2008(Abnormal Operation.)	-	0	-
Cl.19.107(Abnormal Operation.)	-	0	-
Cl.19.108(Abnormal Operation.)	-	0	-
Cl.19.109(Abnormal Operation.)	-	0	-
Cl.19.110(Abnormal Operation.)	-	0	-
Cl.19.111(Abnormal Operation.)	-	0	-
Cl.19.112(Abnormal Operation.)	-	0	-
Cl.19.113(Abnormal Operation.)	-	0	-
Cl.19.114(Abnormal Operation.)	-	0	-
Cl.20 & IS:302-1:2008(Stability & Mechanical Hazards)	-	0	-
Cl.21 & IS:302-1:2008)(Mechanical Strength.)	-	0	-
Cl.21.2 of IS 302-1:2008(Mechanical Strength.)	-	0	-
Cl.21.101 (Mechanical Strength.)	-	0	-
Cl.21.102(Mechanical Strength.)	-	0	-
Cl.21.103(Mechanical Strength.)	-	0	-
Cl.22.1 of IS 302-1:2008(Construction)	-	0	-
Cl.22.5 of IS 302-1:2008(Construction)	-	0	-
Cl.22.6 of IS 302-1:2008(Construction)	-	0	-
Cl.22.7 of IS 302-1:2008(Construction)	-	0	-
Cl.22.8 of IS 302-1:2008(Construction)	-	0	-
Cl.22.9 of IS 302-1:2008(Construction)	-	0	-
Cl.22.11(Construction)	-	0	-
Cl.22.12 of IS 302-1:2008(Construction)	-	0	-
Cl.22.13 of IS 302-1:2008(Construction)	-	0	-
Cl.22.14 of IS 302-1:2008(Construction)	-	0	-
Cl.22.15 of IS 302-1:2008(Construction)	-	0	-
Cl.22.18 of IS 302-1:2008(Construction)	-	0	-
Cl.22.20 of IS 302-1:2008(Construction)	-	0	-
Cl.22.21 of IS 302-1:2008(Construction)	-	0	-
Cl.23 & IS:302-1:2008(Internal Wiring )	-	0	-
Cl.23.4 & Cl.29 of 302-1:2008(Internal Wiring )	-	0	-
Cl.23.5 of 302-1:2008(Internal Wiring )	-	0	-
Cl.23.7 of 302-1:2008(Internal Wiring )	-	0	-
C.23.7 of 302-1:2008(Internal Wiring )	-	0	-
Cl.24.1 of 302-1:2008(Component)	-	0	-
Cl.24.1 of 302-1:2008(Component)	-	0	-
Cl.24.1.3 (Component)	-	0	-
Cl.24.1.3 (Component)	-	0	-
Cl.24.1.3 (Component)	-	0	-
Cl.24.1.3 (Component)	-	0	-
C.24.1.4(Component)	-	0	-
C.24.2 of 302-1:2008(Component)	-	0	-
Cl.24.10(Component)	-	0	-
Cl.25.1 of 302-1:2008(Supply Connection and External Flexible Cords )	-	0	-
Cl. 25.2 of IS 3021:2008(Supply Connection and External Flexible Cords )	-	0	-
Cl. 25.3 of IS 302-1:2008(Supply Connection and External Flexible Cords )	-	0	-
Cl. 25.4 of IS 302-1:2008(Supply Connection and External Flexible Cords )	-	0	-
Cl.25.5 of 302-1:2008(Supply Connection and External Flexible Cords )	-	0	-
Cl.25.6 of 302-1:2008(Supply Connection and External Flexible Cords )	-	0	-
Cl.25.7.(Supply Connection and External Flexible Cords )	-	0	-
Cl.25.8(Supply Connection and External Flexible Cords )	-	0	-
Cl. 25.9(Supply Connection and External Flexible Cords )	-	0	-
Cl.25.10 of 302-1:2008(Supply Connection and External Flexible Cords )	-	0	-
Cl. 25.11(Supply Connection and External Flexible Cords )	-	0	-
Cl. 25.12(Supply Connection and External Flexible Cords )	-	0	-
Cl. 25.13(Supply Connection and External Flexible Cords )	-	0	-
Cl.25.14 of IS 302-1:2008(Supply Connection and External Flexible Cords )	-	0	-
Cl.25.15 of IS 302-1:2008(Supply Connection and External Flexible Cords )	-	0	-
Cl.25.15 of IS 302-1:2008(Supply Connection and External Flexible Cords )	-	0	-
Cl.25.17 of IS 302-1:2008(Supply Connection and External Flexible Cords )	-	0	-
Cl.25.18(Supply Connection and External Flexible Cords )	-	0	-
Cl.25.20(Supply Connection and External Flexible Cords )	-	0	-
Cl.26.1 of IS 302-1:2008(Terminal for External Conductors )	-	0	-
Cl.26.10 of IS 302-1:2008(Terminal for External Conductors )	-	0	-
Cl.26.11 of IS 302-1:2008(Terminal for External Conductors )	-	0	-
Cl.27.1 of 302-1:2008(Provision for Earthing.)	-	0	-
Cl.27.5 of 302-1:2008(Provision for Earthing.)	-	0	-
Cl.28 of 302-1:2008(Screws and Connections.)	-	0	-
Cl.29 & IS:302-1:2008(Clearances, Creepage Distances and Solid Insulation)	-	0	-
Cl.29 & IS:302-1:2008(Clearances, Creepage Distances and Solid Insulation)	-	0	-
Cl.30 & IS:302-1:2008(Resistance to Heat and Fire)	-	0	-
Cl.30.2.2 of 302-1:2008(Resistance to Heat and Fire)	-	0	-
Cl.31 & IS:302-1:2008(Resistance to Rusting.)	-	0	-
Cl.32 & IS:302-1:2008(Radition,Toxicity and similar Hazards.)	-	0	-
19.11.4.1(Electrostatic discharges)	-	0	-
19.11.4.2(Radiated fields)	-	0	-
19.11.4.3(Fast transient bursts)	-	0	-
19.11.4.4(Surge immunity test)	-	0	-
19.11.4.5(Injected currents)	-	0	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	0	-
19.11.4.7(Harmonics)	-	0	-

03 Dec, 2026

Bureau of Indian Standards

The National Standards Body of India

HT Product Services Private Limited, Noida

B-78 (Basement, First, Fourth and Fifth Floor) Sector-5, Noida, Noida, Gautam Buddha Nagar, Uttar Pradesh, 201301

9899994387 info@houseoftesting.com

Scope List