BIS - LIMS (Laboratory Information Management System)

Atmy Analytical Labs Private Limited (Unit-2), Greater Noida

B-19, Ecotech,-1 Extension, Kasna, Greater Noida, Gautam Buddha Nagar, Uttar Pradesh, 201310

9910808996 unit2@atmylabs.com

Scope List

Reset

156 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

121

IS 16544 (2016)

All glass evacuated tubes solar water heating system

All

74900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1(Pre-Conditioning Test)	-	4500	-
6.2.1 (Annex - B)(Exterior Test)	-	3500	-
6.2.2 (Annex - C)(Leakage Test)	-	4500	-
6.2.3 (Annex - D)(Stagnation Test)	-	18500	-
6.2.4 (Annex - E)(External Thermal Shock Test)	-	15800	-
6.2.5 (Annex - F)(Internal Thermal Shock Test)	-	15800	-
6.2.6(Thermal Performance Test)	-	15700	-
6.2.7()	-	4500	-
5(General Requirements)	-	10500	-
6.1(Pre-Conditioning Test)	-	0	-
6.2.1 (Annex - B)(Exterior Test)	-	0	-
6.2.2 (Annex - C)(Leakage Test)	-	0	-
6.2.3 (Annex - D)(Stagnation Test)	-	0	-
6.2.4 (Annex - E)(External Thermal Shock Test)	-	0	-
6.2.5 (Annex - F)(Internal Thermal Shock Test)	-	0	-
6.2.6(Thermal Performance Test)	-	0	-
6.2.7()	-	0	-
5(General Requirements)	-	0	-

08 Feb, 2027

-
Included w.e.f 24.03.2025

122

IS 1475 (2024)

Drinking Water Coolers - Specification (Fourth Revision)

All Types

50500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Classification)	-	0	-
5(Construction)	-	0	-
6.3(Cooling Capacity Test)	-	0	-
6.4(Maximum Operating Condition Test)	-	0	-
6.5(Pull Down Test)	-	0	-
9(Maximum Power Consumption Test)	-	0	-
10(Annual Energy Consumption Test)	-	0	-
11(Storage Capacity Test)	-	0	-
13(Functional Test)	-	0	-
14 a)(Protection against electric shock)	-	0	-
14 b)(High voltage (electric strength) test)	-	0	-
14 c)(Leakage current tests)	-	0	-
14 d)(Provision for earthing)	-	0	-
4(Classification)	-	0	-
5(Construction)	-	0	-
6.3(Cooling Capacity Test)	-	0	-
6.4(Maximum Operating Condition Test)	-	0	-
6.5(Pull Down Test)	-	0	-
9(Maximum Power Consumption Test)	-	0	-
10(Annual Energy Consumption Test)	-	0	-
11(Storage Capacity Test)	-	0	-
13(Functional Test)	-	0	-
14 a)(Protection against electric shock)	-	0	-
14 b)(High voltage (electric strength) test)	-	0	-
14 c)(Leakage current tests)	-	0	-
14 d)(Provision for earthing)	-	0	-
4(Classification)	-	0	-
5(Construction)	-	0	-
6.3(Cooling Capacity Test)	-	0	-
6.4(Maximum Operating Condition Test)	-	0	-
6.5(Pull Down Test)	-	0	-
9(Maximum Power Consumption Test)	-	0	-
10(Annual Energy Consumption Test)	-	0	-
11(Storage Capacity Test)	-	0	-
13(Functional Test)	-	0	-
14 a)(Protection against electric shock)	-	0	-
14 b)(High voltage (electric strength) test)	-	0	-
14 c)(Leakage current tests)	-	0	-
14 d)(Provision for earthing)	-	0	-
4(Classification)	-	-	-
5(Construction)	-	-	-
6.3(Cooling Capacity Test)	-	-	-
6.4(Maximum Operating Condition Test)	-	-	-
6.5(Pull Down Test)	-	-	-
9(Maximum Power Consumption Test)	-	-	-
10(Annual Energy Consumption Test)	-	-	-
11(Storage Capacity Test)	-	-	-
13(Functional Test)	-	-	-
14 a)(Protection against electric shock)	-	-	-
14 b)(High voltage (electric strength) test)	-	-	-
14 c)(Leakage current tests)	-	-	-
14 d)(Provision for earthing)	-	-	-

08 Feb, 2027

-
Included w.e.f.27.03.2025

123

IS 302 : Part 2 : Sec 23 (2009)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 23 appliances for skin or hair care (First Revision)

ALL

27900 View breakup
-

Clause No.	Exclusion	Remark
32(Radiation ,Toxicity and similar hazards)	-	-
31(Resistance to Rusting)	-	-
30(Resistance to Heat & Fire)	-	-
29(Clearances, Creepage Distances & Solid Insulation)	-	-
28(Screws & Connection)	-	-
27(Provision For Earthing)	-	-
26(Terminals For External Conductors)	-	-
25(Supply Connection & External Flexible Cables and Cords)	-	-
24(Component)	-	-
23(Internal wiring)	-	-
22(Construction)	-	-
21(Mechanical strength)	-	-
20(Stability & Mechanical Hazards)	-	-
19(Abnormal Operation)	-	-
18(Endurance)	-	-
17(Overload Protection/ Overload Protection of Transformers & Associated Circuits)	-	-
16(Leakage Current and Electric Strength)	-	-
15(Moisture Resistance)	-	-
14(Transient Over Voltage)	-	-
13(Leakage Current and Electric Strength at Operating Temperature)	-	-
11(Temperature Rise/Heating)	-	-
10(Power Input & Current)	-	-
9(Starting Of Motor Operated Appliances)	-	-
8(Protection against Electric Shock/ Protection against Access to Live Parts)	-	-
7(Marking/ Marking & Instructions)	-	-
6(Classification)	-	-
22.32(CONSTRUCTION)	-	-

08 Feb, 2027

-
Included w.e.f 07.01.2025 Exclusion Cl 19.11.4.1 to Cl 19.11.4.7

124

IS 302 : Part 2 : Sec 75 (2018)

Safety of Household and Similar Electrical Appliances Part 2 Particular Requirements Section 75 Commercial Dispensing Appliances and Vending Machines

ALL

31500 View breakup
-

Clause No.	Exclusion	Remark
32(Radiation, toxicity and similar hazards)	-	-
31(Resistance to rusting)	-	-
30.2.4(Resistance to heat and fire)	-	-
30.2(Resistance to heat and fire)	-	-
30.1(Resistance to heat and fire)	-	-
29.3(Clearances, creepage distances and solid insulation)	-	-
29.2(Clearances, creepage distances and solid insulation)	-	-
29.2(Clearances, creepage distances and solid insulation)	-	-
29.1, Table No.- 16, Table No.- 17 & Table No.18(Clearances, creepage distances and solid insulation)	-	-
29.1, Table No.- 16, Table No.- 17 & Table No.18(Clearances, creepage distances and solid insulation)	-	-
28.2 to 28.4(Screws and connections)	-	-
28.1, Table No.-14(Screws and connections)	-	-
27.6(Provision for earthing)	-	-
27.5(Provision for earthing)	-	-
27.1 to 27.4(Provision for earthing)	-	-
26.10 & 26.11(Terminals for external conductors)	-	-
26.9(Terminals for external conductors)	-	-
26.1 to 26.8(Terminals for external conductors)	-	-
25.16 to 25.25(Supply connection and external flexible cords)	-	-
25.15(Supply connection and external flexible cords)	-	-
25.14(Supply connection and external flexible cords)	-	-
25.9 to 25.13(Supply connection and external flexible cords)	-	-
25.8, Table No.-11(Supply connection and external flexible cords)	-	-
25.5 to 25.7(Supply connection and external flexible cords)	-	-
25.4(Supply connection and external flexible cords)	-	-
25.3(Supply connection and external flexible cords)	-	-
25.2(Supply connection and external flexible cords)	-	-
25.1(Supply connection and external flexible cords)	-	-
24.101 to 24.103(Components)	-	-
24.2 to 24.6(Components)	-	-
24.1(Components)	-	-
23.101 to 23.102(Internal wiring)	-	-
23.6 to 23.10(Internal wiring)	-	-
23.5(Internal wiring)	-	-
23.4(Internal wiring)	-	-
23.3(Internal wiring)	-	-
23.1 & 23.2(Internal wiring)	-	-
22.101 to 22.114(Constructions)	-	-
22.13 to 22.48(Constructions)	-	-
22.12(Constructions)	-	-
22.11(Constructions)	-	-
22.11(Constructions)	-	-
22.7 to 22.10(Constructions)	-	-
22.6(Constructions)	-	-
22.5(Constructions)	-	-
22.4(Constructions)	-	-
22.3(Constructions)	-	-
22.2(Constructions)	-	-
22.1(Constructions)	-	-
21.2(MECHANICAL STRENGTH)	-	-
21.1(MECHANICAL STRENGTH)	-	-
20.2(Stability and mechanical hazards)	-	-
20.1(Stability and mechanical hazards)	-	-
19.101 and 19.102(ABNORMAL OPERATION)	-	-
19.1 to 19.13, Table No. - 9(ABNORMAL OPERATION)	-	-
17(Overload protection of transformers and associated circuits)	-	-
16.3(Insulation resistance test)	-	-
16.3(Electric strength test)	-	-
16.1 & 16.2(Leakage current test)	-	-
15.102(Moisture resistance)	-	-
15.102(Moisture resistance)	-	-
15.101(Moisture resistance)	-	-
15.3(Moisture resistance)	-	-
15.2(Moisture resistance)	-	-
15.1(Moisture resistance)	-	-
14, Table No.- 6 & Table No.-16(Transient over voltages)	-	-
13.3 and Table No.- 4(Electric strength test)	-	-
13.1, 13.2(Leakage current test)	-	-
11.1 to 11.8, Table No.-3(Heating)	-	-
10.1 & 10.2 -Table No. 1, Table No. 2(Power Input and Current)	-	-
8.1.5(Protection against access to live parts)	-	-
8.1.4(Protection against access to live parts)	-	-
8.1.3(Protection against access to live parts)	-	-
8.1.2(Protection against access to live parts)	-	-
8.1, 8.1.1 & 8.2(Protection against access to live parts)	-	-
7.14(Legibility & Durability of Markings test)	-	-
7.1 to 7.13, 7.15, 7.16(Marking)	-	-
32(Radiation, toxicity and similar hazards)	-	-
31(Resistance to rusting)	-	-
30.2.4(Resistance to heat and fire)	-	-
30.2(Resistance to heat and fire)	-	-
30.1(Resistance to heat and fire)	-	-
29.3(Clearances, creepage distances and solid insulation)	-	-
29.2(Clearances, creepage distances and solid insulation)	-	-
29.2(Clearances, creepage distances and solid insulation)	-	-
29.1, Table No.- 16, Table No.- 17 & Table No.18(Clearances, creepage distances and solid insulation)	-	-
29.1, Table No.- 16, Table No.- 17 & Table No.18(Clearances, creepage distances and solid insulation)	-	-
28.2 to 28.4(Screws and connections)	-	-
28.1, Table No.-14(Screws and connections)	-	-
27.6(Provision for earthing)	-	-
27.5(Provision for earthing)	-	-
27.1 to 27.4(Provision for earthing)	-	-
26.10 & 26.11(Terminals for external conductors)	-	-
26.9(Terminals for external conductors)	-	-
26.1 to 26.8(Terminals for external conductors)	-	-
25.16 to 25.25(Supply connection and external flexible cords)	-	-
25.15(Supply connection and external flexible cords)	-	-
25.14(Supply connection and external flexible cords)	-	-
25.9 to 25.13(Supply connection and external flexible cords)	-	-
25.8, Table No.-11(Supply connection and external flexible cords)	-	-
25.5 to 25.7(Supply connection and external flexible cords)	-	-
25.4(Supply connection and external flexible cords)	-	-
25.3(Supply connection and external flexible cords)	-	-
25.2(Supply connection and external flexible cords)	-	-
25.1(Supply connection and external flexible cords)	-	-
24.101 to 24.103(Components)	-	-
24.2 to 24.6(Components)	-	-
24.1(Components)	-	-
23.101 to 23.102(Internal wiring)	-	-
23.6 to 23.10(Internal wiring)	-	-
23.5(Internal wiring)	-	-
23.4(Internal wiring)	-	-
23.3(Internal wiring)	-	-
23.1 & 23.2(Internal wiring)	-	-
22.101 to 22.114(Constructions)	-	-
22.13 to 22.48(Constructions)	-	-
22.12(Constructions)	-	-
22.11(Constructions)	-	-
22.11(Constructions)	-	-
22.7 to 22.10(Constructions)	-	-
22.6(Constructions)	-	-
22.5(Constructions)	-	-
22.4(Constructions)	-	-
22.3(Constructions)	-	-
22.2(Constructions)	-	-
22.1(Constructions)	-	-
21.2(MECHANICAL STRENGTH)	-	-
21.1(MECHANICAL STRENGTH)	-	-
20.2(Stability and mechanical hazards)	-	-
20.1(Stability and mechanical hazards)	-	-
19.101 and 19.102(ABNORMAL OPERATION)	-	-
19.1 to 19.13, Table No. - 9(ABNORMAL OPERATION)	-	-
17(Overload protection of transformers and associated circuits)	-	-
16.3(Insulation resistance test)	-	-
16.3(Electric strength test)	-	-
16.1 & 16.2(Leakage current test)	-	-
15.102(Moisture resistance)	-	-
15.102(Moisture resistance)	-	-
15.101(Moisture resistance)	-	-
15.3(Moisture resistance)	-	-
15.2(Moisture resistance)	-	-
15.1(Moisture resistance)	-	-
14, Table No.- 6 & Table No.-16(Transient over voltages)	-	-
13.3 and Table No.- 4(Electric strength test)	-	-
13.1, 13.2(Leakage current test)	-	-
11.1 to 11.8, Table No.-3(Heating)	-	-
10.1 & 10.2 -Table No. 1, Table No. 2(Power Input and Current)	-	-
8.1.5(Protection against access to live parts)	-	-
8.1.4(Protection against access to live parts)	-	-
8.1.3(Protection against access to live parts)	-	-
8.1.2(Protection against access to live parts)	-	-
8.1, 8.1.1 & 8.2(Protection against access to live parts)	-	-
7.14(Legibility & Durability of Markings test)	-	-
7.1 to 7.13, 7.15, 7.16(Marking)	-	-

08 Feb, 2027

-
Exclusion Cl 19.11.4.1 to Cl 19.11.4.7

125

IS 2095 : Part 1 (2023)

Gypsum Plaster Boards Specification Part 1 Plain Gypsum Plaster Boards

ALL

42000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause. 5.0(CaSO4.2H2O)	-	0	-
Clause. 5.0(Free water (Natural / By -product))	-	0	-
Clause. 5.0(pHvalue (Natural / By -product))	-	0	-
Clause. 5.0(SiO2)	-	0	-
Clause. 5.0(Chloride content)	-	0	-
Clause. 6.0(Manufacturing)	-	0	-
Clause. 7.0(Dimensions)	-	0	-
Clause. 7.0(Tolerances)	-	0	-
Clause. 7.0(Density)	-	0	-
Clause. 7.0(Flexural Breaking Load)	-	0	-
Clause. 7.0(Impact Resistance)	-	0	-
Clause. 7.0(Surface Hardness)	-	0	-
Clause. 7.0(Loading Capability)	-	0	-
Clause. 7.0(Water Absorption)	-	0	-
Clause. 7.0(Fire Resistance)	-	220000	Complete testing charge is Rs. 42000 excluding fire resistance test. Rs.220000 for fire resistance test.
Clause. 7.0(Finish)	-	0	-
Clause. 5.0(CaSO4.2H2O)	-	0	-
Clause. 5.0(Free water (Natural / By -product))	-	0	-
Clause. 5.0(pHvalue (Natural / By -product))	-	0	-
Clause. 5.0(SiO2)	-	0	-
Clause. 5.0(Chloride content)	-	0	-
Clause. 6.0(Manufacturing)	-	0	-
Clause. 7.0(Dimensions)	-	0	-
Clause. 7.0(Tolerances)	-	0	-
Clause. 7.0(Density)	-	0	-
Clause. 7.0(Flexural Breaking Load)	-	0	-
Clause. 7.0(Impact Resistance)	-	0	-
Clause. 7.0(Surface Hardness)	-	0	-
Clause. 7.0(Loading Capability)	-	0	-
Clause. 7.0(Water Absorption)	-	0	-
Clause. 7.0(Fire Resistance)	-	0	-
Clause. 7.0(Finish)	-	0	-
Clause. 5.0(CaSO4.2H2O)	-	0	-
Clause. 5.0(Free water (Natural / By -product))	-	0	-
Clause. 5.0(pHvalue (Natural / By -product))	-	0	-
Clause. 5.0(SiO2)	-	0	-
Clause. 5.0(Chloride content)	-	0	-
Clause. 6.0(Manufacturing)	-	0	-
Clause. 7.0(Dimensions)	-	0	-
Clause. 7.0(Tolerances)	-	0	-
Clause. 7.0(Density)	-	0	-
Clause. 7.0(Flexural Breaking Load)	-	0	-
Clause. 7.0(Impact Resistance)	-	0	-
Clause. 7.0(Surface Hardness)	-	0	-
Clause. 7.0(Loading Capability)	-	0	-
Clause. 7.0(Water Absorption)	-	0	-
Clause. 7.0(Fire Resistance)	-	0	-
Clause. 7.0(Finish)	-	0	-

08 Feb, 2027

-
Included w.e.f 29.04.2025

126

IS 17505 : Part 1 (2021)

Specification for Thermosetting Insulated Fire Survival Cables for Fixed Installation having Low Emission of Smoke and Corrosive Gases when Affected by Fire for Working Voltages upto and including 1100 Vac and 1500 Vdc

ALL

140000 View breakup
-

Clause No.	Exclusion	Remark
Cl. 7.3, Table 1 to 5 of IS 8130:2013 & IS:10810 (Part 5)-1984(Conductor Resistance Test)	-	-
Cl. 7.1.2 of IS 8130 : 2013 & IS:10810 (Part 1)-1984(Annealing Test (for copper))	-	-
Cl. 7.1.1 of IS 8130:2013 & IS:10810 (Part 4)-1984(Persulphate Test for tinned copper)	-	-
IS 191:2007 & IS 440(Copper purity test)	-	-
Cl. 11,14,16, Table 4 and Table 6 of IS 17505 & IS:10810 (Part 6)-1984(Test for overall dimensions and thickness of insulation and sheath)	-	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 36)-1984(Diameter of armour Wire)	-	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 37)-1984(Tensile strength and elongation at break)	-	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 38)-1984(Torsion Test on galvanised steel wire for armouring)	-	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 39)-1984(Winding Test for Formed Wires)	-	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 40)-1984(Uniformity of Zinc coating on Round Steel Wires and Formed Steel Wires (Strips))	-	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 41)-1984(Mass of Zinc coating on Round Steel Wires and Formed Steel Wires (Strips))	-	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 42)-1984(Resistivity test)	-	-
Table 1 and Table 2 of IS 17505 -1: 2021, IS:10810 (Part 7)-1984 & IS:10810 (Part 11)-1984(Tensile Strength and elongation at break before and after ageing.)	-	-
Cl 18.2 of IS 17505-1:2021 & IS:10810 (Part 45)-1984(High voltage test)	-	-
Table 1 of IS 17505-1 :2021 & IS:10810 (Part 43)-1984(Insulation Resistance)	-	-
Cl. 18.6 of IS 17505-1:2021 & IS:10810 (Part 58)-1998(Oxygen index)	-	-
Cl. 18.7 of IS 17505-1:2021 & IS:10810 (Part 64)-2003(Temperature Index)	-	-
Table-1 & Table-2 of IS 17505-1:2021 & IS:10810 (Part 11)-1984(Ageing in air oven.)	-	-
Specification for thermosetting insulated fire survival cables for fixed installation having low emission of smoke and corrosive gases when affected by fire for working voltages upto and including 1100 V A.C. and 1500 V D.C(Hot deformation)	-	-
Table-1 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(pH)	-	-
Table-1 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Conductivity)	-	-
Table-1 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(HCl and HBr)	-	-
Table-1 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Presence of Fluorine / Fluorine Content (if required))	-	-
Table 1 of IS 17505-1: 2021 & IS:10810 (Part 21)-1984(Cold impact test)	-	-
Table 1 & 2 of IS 17505-1: 2021 & IS:10810 (Part 30)-1984(Hot set test)	-	-
Table 1 & 2 of IS 17505-1: 2021 & IS:10810 (Part 13)-1984(Ozone Resistance test)	-	-
Cl 18.5.1 of IS 17505-1 :2021 & IS:10810 (Part 61)-1988(Flame test on single cable)	-	-
Table 1 of IS 17505-1:2021 & IS:10810 (Part 12)-1984(Shrinkage test)	-	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(pH)	-	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Conductivity)	-	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(HCl and HBr)	-	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Presence of Fluorine / Fluorine Content (if required))	-	-
Tabel 1 and 2 of IS 17505-1:2021 & IS:10810 (Part 7)-1984(Tensile strength and elongation at break.)	-	-
Tabel 1 and 2 of IS 17505-1:2021 & IS:10810 (Part 11)-1984(Ageing in air oven.)	-	-
Cl 18.6 of IS 17505-1: 2021 & IS:10810 (Part 58)-1998(Oxygen Index.)	-	-
Cl 18.8 of IS 17505-1:2021 & IS:10810 (Part 64)-2003(Temperature Index)	-	-
Table 1 & 2 of IS 17505-1: 2021 & IS:10810 (Part 13)-1984(Ozone resistance test)	-	-
Table 2 of IS 17505-1:2021 & IS:10810 (Part 15)-1984(Hot deformation)	-	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(pH)	-	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Conductivity)	-	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(HCl and HBr)	-	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Presence of Fluorine / Fluorine Content (if required))	-	-
Table 1 of IS 17505-1:2021 & IS:10810 (Part 12)-1984(Shrinkage test)	-	-
Cl 18.2of IS 17505-1:2021 & IS:10810 (Part 45)-1984.(High Voltage test.)	-	-
Cl 18.5of IS 17505-1:2021 & IS:10810 (Part 53)-1984(Flammability Test)	-	-
Table-2 of IS 17505-1:2021 & IS:10810 (Part 20)-1984(Cold bend test)	-	-
Table-2 of IS 17505-1:2021 & IS:10810 (Part 21)-1984(Cold impact test)	-	-
Cl 18.5 of IS 17505-1:2021 & IS:10810 (Part 61)-1988(Flammability Test)	-	-
Cl 18.9 of IS 17505-1:2021(Water immersion test ( effect of water on sheath of cable))	-	-
Cl 18.8 of IS 17505-1:2021& IS:10810 (Part 63)-1993(Smoke density test)	-	-
Cl. 3.5, 18.4 & Annex-E of IS 17505-1:2021(Circuit integrity test under fire)	-	-
Cl. 17.1 Table 9 (iv) e(Heat Shock)	-	-
Cl. 17.1 Table 9 (iv) h(Water absorption (Gravimetric))	-	-
Cl. 17.1 Table 9 (vii) b(Flame test on bunched cable)	-	-
Cl. 17.1 Table 9 (ix)(Abrasion resistance test)	-	-

08 Feb, 2027

-
-

127

IS 302 : Part 2 : Sec 3 (2007)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 3 electric iron (First Revision)

All

13500 View breakup
-

Clause No.	Exclusion	Remark
6(Classification- IS 302-1 )	-	-
6(Classification- IS 302-1)	-	-
7.1(Marking- IS 302-1)	-	-
7.1(Marking- IS 302-1)	-	-
7.1(Marking- IS 302-1)	-	-
7.1(Marking- IS 302-1)	-	-
7.1(Marking- IS 302-1)	-	-
7.1(Marking- IS 302-1)	-	-
7.1(Marking- IS 302-1)	-	-
7.1(Marking- IS 302-1)	-	-
7.1(Marking- IS 302-1)	-	-
7.3(Marking- IS 302-1)	-	-
7.4(Marking- IS 302-1)	-	-
7.6(Marking- IS 302-1)	-	-
7.7(Marking- IS 302-1)	-	-
7.8(Marking- IS 302-1)	-	-
7.11(Marking- IS 302-1)	-	-
7.12(Marking- IS 302-1)	-	-
7.13(Marking- IS 302-1)	-	-
7.14(Marking- IS 302-1)	-	-
7.15(Marking- IS 302-1)	-	-
7.101(Marking)	-	-
8( Protection Against Electric Shock, IS 302-1)	-	-
10(Power Input and Current, IS 302-1)	-	-
11(Heating, IS 302-1)	-	-
11(Heating, IS 302-1)	-	-
11(Heating, IS 302-1)	-	-
11(Heating, IS 302-1)	-	-
11(Heating, IS 302-1)	-	-
11(Heating, IS 302-1)	-	-
11(Heating, IS 302-1)	-	-
11(Heating, IS 302-1)	-	-
13(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	-
13(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	-
14(Transient Over Voltages, IS 302-1)	-	-
15.1(Moisture Resistance, IS 302-1)	-	-
15.2(Moisture Resistance, IS 302-1)	-	-
15.3(Moisture Resistance, IS 302-1)	-	-
16(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	-
16(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	-
19.4(Abnormal Operation, IS 302-1)	-	-
19.4(Abnormal Operation, IS 302-1)	-	-
19.5(Abnormal Operation, IS 302-1)	-	-
19.5(Abnormal Operation, IS 302-1)	-	-
19.7(Abnormal Operation)	-	-
19.9(Abnormal Operation)	-	-
19.1(Abnormal Operation)	-	-
19.101(Abnormal Operation)	-	-
20.1(Stability & Mechanical Hazards, IS 302-1)	-	-
20.2(Stability & Mechanical Hazards, IS 302-1)	-	-
21.1(Mechanical Strength, IS 302-1)	-	-
21.2(Mechanical Strength, IS 302-1)	-	-
21.101(Mechanical Strength, IS 302-2-3)	-	-
22(Construction, IS 302-1)	-	-
22.101(Construction)	-	-
22.102(Construction)	-	-
22.103(Construction)	-	-
22.104(Construction)	-	-
22.105(Construction)	-	-
22.106(Construction)	-	-
22.107(Construction)	-	-
23.1(Internal Wiring, IS 302-1)	-	-
23.2(Internal Wiring, IS 302-1)	-	-
23.3(Internal Wiring, IS 302-1)	-	-
23.4(Internal Wiring, IS 302-1)	-	-
23.5(Internal Wiring, IS 302-1)	-	-
23.6(Internal Wiring, IS 302-1)	-	-
23.7(Internal Wiring, IS 302-1)	-	-
23.8(Internal Wiring, IS 302-1)	-	-
23.9(Internal Wiring, IS 302-1)	-	-
23.10(Internal Wiring, IS 302-1)	-	-
24.1(Components, IS 302-1)	-	-
24.2(Components, IS 302-1)	-	-
24.4(Components, IS 302-1)	-	-
24.5(Components, IS 302-1)	-	-
24.6(Components, IS 302-1)	-	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	-
25.5(Supply Connection and External Flexible Cords, IS 302-1)	-	-
25.6(Supply Connection and External Flexible Cords, IS 302-1)	-	-
25.7(Supply Connection and External Flexible Cords, IS 302-1)	-	-
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	-
26.9(Supply Connection and External Flexible Cords, IS 302-1)	-	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	-
25.11(Supply Connection and External Flexible Cords, IS 302-1)	-	-
25.12(Supply Connection and External Flexible Cords, IS 302-1)	-	-
25.13(Supply Connection and External Flexible Cords, IS 302-1)	-	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	-
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	-
25.16(Supply Connection and External Flexible Cords, IS 302-1)	-	-
25.17(Supply Connection and External Flexible Cords, IS 302-1)	-	-
25.18(Supply Connection and External Flexible Cords, IS 302-1)	-	-
25.19(Supply Connection and External Flexible Cords, IS 302-1)	-	-
25.2(Supply Connection and External Flexible Cords, IS 302-1)	-	-
25.21(Supply Connection and External Flexible Cords, IS 302-1)	-	-
25.22(Supply Connection and External Flexible Cords, IS 302-1)	-	-
26(Terminals for External Conductors, IS 302-1)	-	-
27.1(Provision for Earthing, IS 302-1)	-	-
27.2(Provision for Earthing, IS 302-1)	-	-
27.3(Provision for Earthing, IS 302-1)	-	-
27.4(Provision for Earthing, IS 302-1)	-	-
27.5(Provision for Earthing, IS 302-1)	-	-
28(Screws & Connections, IS 302-1)	-	-
29.1(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	-
29.2(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	-
30.1(Resistance to Heat, Fire & Tracking, IS 302-1)	-	-
30.2(Resistance to Heat, Fire & Tracking, IS 302-1)	-	-
31(Resistance of Rusting, IS 302-1)	-	-
32(Radiation, Toxicity and similar Hazard IS 302-1)	-	-
4(General requirement)	-	-
16(Leakage current and electric strength)	-	-
17(Overload protection of transformers and associated circuits)	-	-
17(Overload protection of transformers and associated circuits)	-	-
17(Overload protection of transformers and associated circuits)	-	-
18(Endurance)	-	-
5(GENERAL CONDITIONS FOR THE TESTS)	-	-
19(Abnormal operation)	-	-
25(Supply Connection and External Flexible Cords)	-	-

08 Feb, 2027

-
Exclusion: Cl 19.11.4.1 - 19.11.4.7 (EMI/EMC)

128

IS 17048 (2018)

Halogen free flame retardant (HFFR) cables for working voltages up to and including 1 100 Volts - Specification

83500 View breakup
-

Clause No.	Exclusion	Remark
4.1.1 a) (Conductor : Material )	-	-
4.1.1 b) (Material : Seperator tape )	-	-
4.1.1 d) , 11.1, 12.1, 13.1,14.1(Class of conductor )	-	-
4.1.1 e) (Shape of conductor )	-	-
4.1.1 f) (Nominal size of conductor )	-	-
4.2.1, 11.2, 12.2, 13.2, 14.2(Insulation : Material )	-	-
4.2.2, 11.2, 12.2, 13.2, 14.2(Insulation : Application )	-	-
4.2.3,11.2, 12.2, 13.2(Thickness of insulation - Avearge : IS 10810 ( Part 6 ))	-	-
4.2.3, 11.2, 12.2, 13.2, 14.2(Thickness of insulation - miniumum : IS 10810 ( Part 6 ))	-	-
4.2.4(Insulation : Tensile stregth ( Before ageing)-IS 10810 (Part 7) )	-	-
4.2.4(Insulation : Elongation ( Before ageing) -IS 10810 (Part 7))	-	-
4.2.4(Insulation : Tensile stregth ( After ageing) - IS 10810 (Part 7) )	-	-
4.2.5(Insulation : Tensile stregth variation ( After ageing) - IS 10810 (Part 7) )	-	-
4.2.5(Insulation : Elongation variation (after ageing) - IS 10810 (Part 7) )	-	-
4.3(Fillers)	-	-
4.4(Binder Tape)	-	-
4.5.1,13.4, 14.4(Sheath : Compound )	-	-
4.5.2, 13.4, 14.4(Sheath : Application)	-	-
4.5.3,13.4, 14.4(Thickness of sheath - Average : IS 10810 (Part 6))	-	-
4.5.3,13.4, 14.4(Thickness of sheath - Minimum : IS 10810 (Part 6))	-	-
4.5.4, 13.4(Sheath : Tensile stregth ( Before ageing)-IS 10810 (Part 7) )	-	-
4.5.4,13.4(Sheath : Elongation ( Before ageing) -IS 10810 (Part 7))	-	-
4.5.4, 13.4, 14.4(Sheath : Tensile stregth ( After ageing) - IS 10810 (Part 7) )	-	-
4.5.5, 13.4, 14.4(Sheath : Tensile stregth variation ( After ageing) - IS 10810 (Part 7) )	-	-
4.5.4, 13.4, 14.4(Sheath : Elongation (after ageing) - IS 10810 (Part 7) )	-	-
4.5.5, 13.4,14.4(Sheath : Elongation variation (after ageing) - IS 10810 (Part 7) )	-	-
4.5.5, 11.3, 12.3, 13.6, 14.6(Overall Dimensions)	-	-
4.5.5.1, 11.3, 12.3,13.5, 14.5(Ovality)	-	-
4.5.6, 13.4(Colour of Sheath)	-	-
5.1(High Voltage Test (at Room Temperature))	-	-
5.2(Spark Test (Routine Test))	-	-
5.3(Flammability Test- IS 10810 (Part 53).)	-	-
5.4(Oxygen Index Test- IS 10810 (Part 58))	-	-
5.5(Temperature Index-IS 10810 (Part 64).)	-	-
5.6(Smoke Density-IS 10810 (Part 63).)	-	-
5.7(Assessment of Halogen- Table 1 of Annex D)	-	-
5.1(Persulphate Test- IS 10810 (Part 4).)	-	-
5.11(Flame Retardant Test- IS 10810 (Part 61),)	-	-
5.12(Hot Set Test- IS 10810 (Part 30).)	-	-
5.12(Permanent Set - IS 10810 (Part 30).)	-	-
5.13(Water Immersion Test (Effect of Water on Sheath) : Tensile strength -IS 10810 (Part 7).)	-	-
5.13(Water Immersion Test (Effect of Water on Sheath) : Elogation -IS 10810 (Part 7).)	-	-
5.14(Ozone Resistance Test -IS 10810 (Part 13 ))	-	-
5.15(Cold Bend Test-IS 10810 (Part 20).)	-	-
5.16(Cold Impact Test- IS 10810 (Part 21).)	-	-
6.1, Table 1(CORE IDENTIFICATION)	-	-
6.2(Core Identification by Numbers)	-	-
6.2.1(Preferred Arrangement of Marking)	-	-
6.2.2(Durability)	-	-
7.0(CABLE CODE)	-	-
9.0( IDENTIFICATION)	-	-
10.1(Packing )	-	-
10.2(marking)	-	-
10.2.1(Standards marking)	-	-
13.3, 14.3(assembly of cores )	-	-
6.1(General Requirements)	-	-
6.1.1(Colour Combination Green Yellow)	-	-
12.1(Conductor)	-	-
12.2, Table 4(insulation)	-	-
Table 4(Copper Purity test)	-	-
4.3.1 (e)(Fluorine content test (Fillers))	-	-
4.3.1 (d)(Presence of fluorine test (Fillers))	-	-
4.3.1 (c)(Conductivity test (Fillers))	-	-
4.3.1 (b)(pH test (Fillers))	-	-
4.3.1 (a)(HCl test (Fillers))	-	-
5.7 (a)(HCl test (Assessment of halogen test))	-	-
5.7 (b)(pH test (Assessment of halogen test))	-	-
5.7 (c)(Conductivity test (Assessment of halogen test))	-	-
5.7 (d)(Presence of fluorine test (Assessment of halogen test))	-	-
5.7 (e)(Fluorine content test (Assessment of halogen test))	-	-
Table 2 ,( Clause 11.4, 12.4, 13.7 14.7 and 15.7 )(Insulation Resistance)	-	-
"Table 2 ( Clause 11.4, 12.4, 13.7 14.7 and 15.7 )"(Conductor Resistance)	-	-
Table 2 , Clause .5.13(Water immersion test (Effect of water on sheath) - TS Variation of Sheath)	-	-
Table 2 , Clause 5.13(Water immersion test (Effect of water on sheath) - Elongation Variation of Sheath)	-	-
"Table 2 ( Clause 11.4, 12.4, 13.7 14.7 and 15.7 )"(Hot Deformation)	-	-
Table 2, III.a.ii(Annealing test (for Cu, before stranding))	-	-
Table 2, II.a, b(Wrapping test before stranding (for Al))	-	-
4.2.4(Insulation : Elongation (after ageing) - IS 10810 (Part 7) )	-	-

08 Feb, 2027

-
INCLUDING W.E.F 10.10.2024

129

IS 302 : Part 2 : Sec 80 (2017)

Household and similar electrical appliances - Safety: Part 2 - 80 particular requirements for fans (First Revision)

ALL

17900 View breakup
-

Clause No.	Exclusion	Remark
32.0(Radiation, Toxicity and Similar Hazards)	-	-
31.0(Resistance To Rusting)	-	-
30.0(Resistance To Heat and Fire)	-	-
29.0(Creepage Distances and Clearances)	-	-
28.0(Screws and Connections)	-	-
27.0(Provision For Earthing)	-	-
26.0(Terminals for external conductors)	-	-
25.0(Supply Connection and External Flexible Cords)	-	-
24.0(Components)	-	-
23.0(Internal Wiring)	-	-
22.0(Construction)	-	-
21.0(Mechanical Strength)	-	-
20.0(Stability and mechanical hazards)	-	-
19.0(Abnormal Operation)	-	-
17.0(Overload Protection of transformer and associated circuit)	-	-
16.0(Leakage current and Electric strength (After Humidity (Environmental) Treatment))	-	-
15.0(Moisture resistance)	-	-
14.0(Transient Overvoltage)	-	-
13.0(Leakage Current and electric strength at operating temperature)	-	-
11.0(Heating)	-	-
10.0(Input and Current)	-	-
8.0(Protection against access to live parts)	-	-
7.0(Classification)	-	-
6.0(Marking and Instructions)	-	-
4(GENERAL REQUIREMENT)	-	-
5(GENERAL CONDITIONS FOR THE TESTS)	-	-

08 Feb, 2027

-
Included w.e.f 12.12.2024 Exclusion : 19.11.4.1 (Electrostatic discharges), 19.11.4.2 (Radiated fields), 19.11.4.3 (Fast transient bursts), 19.11.4.4 (Surge immunity test), 19.11.4.5 (Immunity to conducted discharges), 19.11.4.6 (Class 3 Voltage dips and interruptions), 19.11.4.7 (Harmonics)

130

IS 11037 (2019)

Electronic Type Fan Regulators — Specification ( First Revision )

29800 View breakup
-

Clause No.	Exclusion	Remark
9.1 (a)(Marking )	-	-
9.1 (b)(Marking )	-	-
9.1 (c)(Marking )	-	-
9.1 (d)(Marking )	-	-
9.1 (e)(Marking )	-	-
9.1 (f)(Marking )	-	-
9.2(Marking )	-	-
6.1(Design and General Construction)	-	-
6.2(Design and General Construction)	-	-
6.3(Design and General Construction)	-	-
6.5(Design and General Construction)	-	-
6.6(Design and General Construction)	-	-
9.5.1 , 7.3(Temperature Rise)	-	-
9.5.1 , 7.3 (a)(Temperature Rise )	-	-
9.5.1 , 7.3 (b)(Temperature Rise)	-	-
9.5.1 , 7.3 (b)(Temperature Rise)	-	-
9.5.1 , 7.3 (b)(Temperature Rise)	-	-
9.5.2, 7.2(Leakage Current Test(as per Cl.13.2 of IS 302 (Part 1).)	-	-
9.5.3(High Voltage Test)	-	-
9.5.5(Earthing Connection)	-	-
9.5.6(Protection against electric shock (as per Cl.8 of IS 302 (Part 1))	-	-
7.6(General and safety requirements)	-	-
7.7(Voltage drop)	-	-
8.1(Performance)	-	-
8.2(Performance)	-	-
8.3(Performance)	-	-
9.5.7, 9.5.4(Moisture Resistance )	-	-
7.4.1(a)(Mechanical strength )	-	-
7.4.1(b)(Mechanical strength )	-	-
9.5.8, (Mechanical strength (as per Cl.21.1 of IS 302-1:2008))	-	-
9.5.9, 7.5, Table-1(Creepage Distances and Clearances (as per Cl. 29 of IS 302-1))	-	-
9.5.9, 7.5, Table-1(Creepage Distances and Clearances (as per Cl. 29 of IS 302-1))	-	-
9.5.10( Electrical Endurance Test)	-	-
9.5.11.2(Environmental Tests)	-	-
9.5.11.3(Environmental Tests)	-	-
9.5.11.4(Environmental Tests)	-	-
9.5.12(Resistance to Abnormal Heat and to Fire)	-	-
9.5.12.1(Resistance to Abnormal Heat and to Fire)	-	-
9.5.13(Resistance to Rusting )	-	-
9.5.14(Checking of Dimensions)	-	-
9.1(Marking )	-	-
9.1 (a)(Marking )	-	-
9.1 (b)(Marking )	-	-
9.1 (c)(Marking )	-	-
9.1 (d)(Marking )	-	-
9.1 (e)(Marking )	-	-
9.1 (f)(Marking )	-	-
9.2(Marking )	-	-
6.1(Design and General Construction)	-	-
6.2(Design and General Construction)	-	-
6.3(Design and General Construction)	-	-
6.5(Design and General Construction)	-	-
6.6(Design and General Construction)	-	-
9.5.1 , 7.3(Temperature Rise)	-	-
9.5.1 , 7.3 (a)(Temperature Rise )	-	-
9.5.1 , 7.3 (b)(Temperature Rise)	-	-
9.5.1 , 7.3 (b)(Temperature Rise)	-	-
9.5.1 , 7.3 (b)(Temperature Rise)	-	-
9.5.2, 7.2(Leakage Current Test(as per Cl.13.2 of IS 302 (Part 1).)	-	-
9.5.3(High Voltage Test)	-	-
9.5.5(Earthing Connection)	-	-
9.5.6(Protection against electric shock (as per Cl.8 of IS 302 (Part 1))	-	-
7.6(General and safety requirements)	-	-
7.7(Voltage drop)	-	-
8.1(Performance)	-	-
8.2(Performance)	-	-
8.3(Performance)	-	-
9.5.7, 9.5.4(Moisture Resistance )	-	-
7.4.1(Mechanical strength )	-	-
7.4.1(a)(Mechanical strength )	-	-
7.4.1(b)(Mechanical strength )	-	-
9.5.8, (Mechanical strength (as per Cl.21.1 of IS 302-1:2008))	-	-
9.5.9, 7.5, Table-1(Creepage Distances and Clearances (as per Cl. 29 of IS 302-1))	-	-
9.5.9, 7.5, Table-1(Creepage Distances and Clearances (as per Cl. 29 of IS 302-1))	-	-
9.5.10( Electrical Endurance Test)	-	-
9.5.11.2(Environmental Tests)	-	-
9.5.11.3(Environmental Tests)	-	-
9.5.11.4(Environmental Tests)	-	-
9.5.12(Resistance to Abnormal Heat and to Fire)	-	-
9.5.12.1(Resistance to Abnormal Heat and to Fire)	-	-
9.5.13(Resistance to Rusting )	-	-
9.5.14(Checking of Dimensions)	-	-

08 Feb, 2027

-
Included w.e.f. 02.12.2024

131

IS 14772 (2020)

Boxes and Enclosures for Electrical Accessories for Household and Similar Fixed Electrical Installations — General Requirements ( First Revision )

ALL

24900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1(Nature of material)	-	29900	-
7.2(Type of installation)	-	29900	-
7.3(Types of inlets)	-	29900	-
7.4(Clamping means)	-	29900	-
7.5(Minimum temperature during installation)	-	29900	-
7.6, 7.7, 7.8(The degree of ingress protection)	-	29900	-
7.9(The provision for fixing accessories to the boxes )	-	29900	-
7.1(The method of fixing the terminals)	-	29900	-
8.1(marking)	-	29900	-
8.2(By Inspection and The marking is rubbed by hand 15s width a piece of cloth soaked with water and again for 15s with a piece of cloth soaked with petroleum spirit.)	-	29900	-
8.3(BIS Certification Marking)	-	29900	-
9.0(Dimensions)	-	29900	-
10.0(Protection against electric shock)	-	29900	-
11.0(PROVISION FOR EARTHING)	-	29900	-
12.0(Constructions)	-	29900	-
13.0(Resistance to ingress of solid objects)	-	29900	-
13.0(Resistance toharmful ingress of water)	-	29900	-
13.0(Resistance to ageing)	-	29900	-
14.0(insultation resistance)	-	29900	-
14.0(electric strength)	-	29900	-
15.0(Mechanical strength)	-	29900	-
16.0(resistance to heat)	-	29900	-
17.0(creepage distance)	-	29900	-
17.0(clearances)	-	29900	-
17.0(distance through seating compund)	-	29900	-
18.0(Resistance to insulating material to abnormal heat and fire)	-	29900	-
19.0(Resistance to tracking)	-	29900	-
20.0(Resistance to corrosion)	-	29900	-
21.0(Electromagnetic compatibility (EMC))	-	29900	-

08 Feb, 2027

-
Included w.e.f. 02.12.2024

132

IS 302 : Part 2 : Sec 9 (2009)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 9 toasters, grills, roasters and similar appliances (First Revision)

All

19500 View breakup
-

Clause No.	Exclusion	Remark
Cl.32(Verification)	-	-
Cl.31(Verification)	-	-
Cl.30(Verification)	-	-
CL.29(Verification)	-	-
Cl.28(Verification)	-	-
Cl.27(Verification)	-	-
Cl.26(Verification)	-	-
Cl.25(Verification)	-	-
Cl.24(Verification)	-	-
Cl.23(Verification)	-	-
Cl.22(Verification)	-	-
Cl.21(Verification)	-	-
Cl.20(Verification)	-	-
Cl.19(Verification)	-	-
Cl. 16(Verification)	-	-
Cl.15.1(Moisture Resistance)	-	-
Cl.14(Verification)	-	-
Cl.13(Verification)	-	-
Cl.11(Verification)	-	-
Cl.10(Verification)	-	-
Cl.8(Verification)	-	-
Cl. 7(Verification)	-	-
Cl. 6(Classification- IS 302-1)	-	-
Cl. 32 IS 302-2-9(Radiation, Toxicity and similar hazards)	-	-
Cl. 31 IS 302-2-9(Resistance To Rusting )	-	-
Cl. 30 IS 302-2-9(Resistance To Heat, Fire And Tracking)	-	-
Cl. 29 IS 302-2-9(Creepage Distances, Clearances And Distances Through Insulation)	-	-
Cl. 28 IS 302-2-9(Screws and Connections)	-	-
Cl. 27 IS 302-2-9(Provision For Earthing )	-	-
Cl. 26 IS 302-2-9(Terminal For External Conductors )	-	-
Cl. 25 IS 302-2-9(Supply Connections and External Flexible Cables and Cords )	-	-
Cl. 24 IS 302-2-9(Components)	-	-
Cl. 23 IS 302-2-9(Internal Wiring)	-	-
Cl. 22 IS 302-2-9(Construction )	-	-
Cl. 21 IS 302-2-9(Mechanical Strength)	-	-
Cl. 20 IS 302-2-9(Stability and mechanical Hazards)	-	-
Cl. 19 IS 302-2-9(Abnormal Operation )	-	-
Cl. 18 IS 302-2-9(Endurance)	-	-
Cl. 17 IS 302-2-9(Overload protection of transformers and associated circuits.)	-	-
Cl. 16 IS 302-2-9(Leakage Current and Electric strength )	-	-
Cl. 15 IS 302-2-9(Moisture Resistance)	-	-
Cl. 14 IS 302-2-9(Transient overvoltage)	-	-
Cl. 13.3 IS 302-2-9(Leakage Current & Electric Strength at Operating Temperature)	-	-
Cl. 11 IS 302-2-9(Heating)	-	-
Cl. 10 IS 302-2-9(Power Input and Current )	-	-
Cl. 9 IS 302-2-9(Starting of motor operated appliances)	-	-
Cl. 8 IS 302-2-9(Protection against access to live parts)	-	-
Cl. 7 IS 302-2-9(Marking and Instruction)	-	-
Cl. 6 IS 302-2-9(Classification- IS 302-1)	-	-
32(Radiation, toxicity and similar hazards)	-	-
31(Resistance to rusting)	-	-
31(Resistance to rusting)	-	-
30.2.4(Resistance to heat and fire)	-	-
30.2(Resistance to heat and fire)	-	-
30.1(Resistance to heat and fire)	-	-
29.3(Clearances, creepage distances and solid insulation)	-	-
29.2(Clearances, creepage distances and solid insulation)	-	-
29.2(Clearances, creepage distances and solid insulation)	-	-
29.1, Table No.- 16, Table No.- 17 & Table No.18(Clearances, creepage distances and solid insulation)	-	-
29.1, Table No.- 16, Table No.- 17 & Table No.18(Clearances, creepage distances and solid insulation)	-	-
28.2 to 28.4(Screws and connections)	-	-
28.1, Table No.-14(Screws and connections)	-	-
27.6(Provision for earthing)	-	-
27.5(Provision for earthing)	-	-
27.1 to 27.4(Provision for earthing)	-	-
26.10 & 26.11(Terminals for external conductors)	-	-
26.9(Terminals for external conductors)	-	-
26.1 to 26.8(Terminals for external conductors)	-	-
25.16 to 25.25(Supply connection and external flexible cords)	-	-
25.15(Supply connection and external flexible cords)	-	-
25.14(Supply connection and external flexible cords)	-	-
25.14(Supply connection and external flexible cords)	-	-
25.9 to 25.13(Supply connection and external flexible cords)	-	-
25.8, Table No.-11(Supply connection and external flexible cords)	-	-
25.5 to 25.7(Supply connection and external flexible cords)	-	-
25.4(Supply connection and external flexible cords)	-	-
25.3(Supply connection and external flexible cords)	-	-
25.2(Supply connection and external flexible cords)	-	-
25.1(Supply connection and external flexible cords)	-	-
24.101(Components)	-	-
24.101(Components)	-	-
24.2 to 24.6(Components)	-	-
24.1(Components)	-	-
23.6 to 23.10(Internal wiring)	-	-
23.5(Internal wiring)	-	-
23.4(Internal wiring)	-	-
23.3(Internal wiring)	-	-
23.1 & 23.2(Internal wiring)	-	-
22.111(Constructions)	-	-
22.111(Constructions)	-	-
22.11o(Constructions)	-	-
22.109(Constructions)	-	-
22.108(Constructions)	-	-
22.101 to 22.107(Constructions)	-	-
22.13 to 22.48(Constructions)	-	-
22.12(Constructions)	-	-
22.11(Constructions)	-	-
22.11(Constructions)	-	-
22.7 to 22.10(Constructions)	-	-
22.6(Constructions)	-	-
22.5(Constructions)	-	-
22.4(Constructions)	-	-
22.3(Constructions)	-	-
22.2(Constructions)	-	-
22.1(Constructions)	-	-
21.101(MECHANICAL STRENGTH)	-	-
21.101(MECHANICAL STRENGTH)	-	-
21.2(MECHANICAL STRENGTH)	-	-
21.1(MECHANICAL STRENGTH)	-	-
20.2(Stability and mechanical hazards)	-	-
20.1(Stability and mechanical hazards)	-	-
19.104(ABNORMAL OPERATION)	-	-
19.103(ABNORMAL OPERATION)	-	-
19.102(ABNORMAL OPERATION)	-	-
19.101(ABNORMAL OPERATION)	-	-
19.1 to 19.13, Table No. - 9(ABNORMAL OPERATION)	-	-
17(Overload protection of transformers and associated circuits)	-	-
16.3(Insulation resistance test)	-	-
16.3(Electric strength test)	-	-
16.1 & 16.2(Leakage current test)	-	-
15.3(Moisture resistance)	-	-
15.3(Moisture resistance)	-	-
15.3(Moisture resistance)	-	-
15.2(Moisture resistance)	-	-
15.2(Moisture resistance)	-	-
15.2(Moisture resistance)	-	-
15.2(Moisture resistance)	-	-
15.1(Moisture resistance)	-	-
14, Table No.- 6 & Table No.-16(Transient over voltages)	-	-
13.3 and Table No.- 4(Electric strength test)	-	-
13.1, 13.2(Leakage current test)	-	-
13.1, 13.2(Leakage current test)	-	-
11.101(Heating)	-	-
11.1 to 11.8, Table No.-3(Heating)	-	-
10.1 & 10.2 -Table No. 1, Table No. 2(Power Input and Current)	-	-
8.1.5(Protection against access to live parts)	-	-
8.1.4(Protection against access to live parts)	-	-
8.1.3(Protection against access to live parts)	-	-
8.1.2(Protection against access to live parts)	-	-
8.1, 8.1.1 & 8.2(Protection against access to live parts)	-	-
7.14(Legibility & Durability of Markings test)	-	-
7.1 to 7.13, 7.15, 7.16(Marking)	-	-
32(Radiation, toxicity and similar hazards)	-	-
31(Resistance to rusting)	-	-
31(Resistance to rusting)	-	-
30.2.4(Resistance to heat and fire)	-	-
30.2(Resistance to heat and fire)	-	-
30.1(Resistance to heat and fire)	-	-
29.3(Clearances, creepage distances and solid insulation)	-	-
29.2(Clearances, creepage distances and solid insulation)	-	-
29.2(Clearances, creepage distances and solid insulation)	-	-
29.1, Table No.- 16, Table No.- 17 & Table No.18(Clearances, creepage distances and solid insulation)	-	-
29.1, Table No.- 16, Table No.- 17 & Table No.18(Clearances, creepage distances and solid insulation)	-	-
28.2 to 28.4(Screws and connections)	-	-
28.1, Table No.-14(Screws and connections)	-	-
27.6(Provision for earthing)	-	-
27.5(Provision for earthing)	-	-
27.1 to 27.4(Provision for earthing)	-	-
26.10 & 26.11(Terminals for external conductors)	-	-
26.9(Terminals for external conductors)	-	-
26.1 to 26.8(Terminals for external conductors)	-	-
25.16 to 25.25(Supply connection and external flexible cords)	-	-
25.15(Supply connection and external flexible cords)	-	-
25.14(Supply connection and external flexible cords)	-	-
25.14(Supply connection and external flexible cords)	-	-
25.9 to 25.13(Supply connection and external flexible cords)	-	-
25.8, Table No.-11(Supply connection and external flexible cords)	-	-
25.5 to 25.7(Supply connection and external flexible cords)	-	-
25.4(Supply connection and external flexible cords)	-	-
25.3(Supply connection and external flexible cords)	-	-
25.2(Supply connection and external flexible cords)	-	-
25.1(Supply connection and external flexible cords)	-	-
24.101(Components)	-	-
24.101(Components)	-	-
24.2 to 24.6(Components)	-	-
24.1(Components)	-	-
23.6 to 23.10(Internal wiring)	-	-
23.5(Internal wiring)	-	-
23.4(Internal wiring)	-	-
23.3(Internal wiring)	-	-
23.1 & 23.2(Internal wiring)	-	-
22.111(Constructions)	-	-
22.111(Constructions)	-	-
22.11o(Constructions)	-	-
22.109(Constructions)	-	-
22.108(Constructions)	-	-
22.101 to 22.107(Constructions)	-	-
22.13 to 22.48(Constructions)	-	-
22.12(Constructions)	-	-
22.11(Constructions)	-	-
22.11(Constructions)	-	-
22.7 to 22.10(Constructions)	-	-
22.6(Constructions)	-	-
22.5(Constructions)	-	-
22.4(Constructions)	-	-
22.3(Constructions)	-	-
22.2(Constructions)	-	-
22.1(Constructions)	-	-
21.101(MECHANICAL STRENGTH)	-	-
21.101(MECHANICAL STRENGTH)	-	-
21.2(MECHANICAL STRENGTH)	-	-
21.1(MECHANICAL STRENGTH)	-	-
20.2(Stability and mechanical hazards)	-	-
20.1(Stability and mechanical hazards)	-	-
19.104(ABNORMAL OPERATION)	-	-
19.103(ABNORMAL OPERATION)	-	-
19.102(ABNORMAL OPERATION)	-	-
19.101(ABNORMAL OPERATION)	-	-
19.1 to 19.13, Table No. - 9(ABNORMAL OPERATION)	-	-
17(Overload protection of transformers and associated circuits)	-	-
16.3(Insulation resistance test)	-	-
16.3(Electric strength test)	-	-
16.1 & 16.2(Leakage current test)	-	-
15.3(Moisture resistance)	-	-
15.3(Moisture resistance)	-	-
15.3(Moisture resistance)	-	-
15.2(Moisture resistance)	-	-
15.2(Moisture resistance)	-	-
15.2(Moisture resistance)	-	-
15.2(Moisture resistance)	-	-
15.1(Moisture resistance)	-	-
14, Table No.- 6 & Table No.-16(Transient over voltages)	-	-
13.3 and Table No.- 4(Electric strength test)	-	-
13.1, 13.2(Leakage current test)	-	-
13.1, 13.2(Leakage current test)	-	-
11.101(Heating)	-	-
11.1 to 11.8, Table No.-3(Heating)	-	-
10.1 & 10.2 -Table No. 1, Table No. 2(Power Input and Current)	-	-
8.1.5(Protection against access to live parts)	-	-
8.1.4(Protection against access to live parts)	-	-
8.1.3(Protection against access to live parts)	-	-
8.1.2(Protection against access to live parts)	-	-
8.1, 8.1.1 & 8.2(Protection against access to live parts)	-	-
7.14(Legibility & Durability of Markings test)	-	-
7.1 to 7.13, 7.15, 7.16(Marking)	-	-
32(Radiation ,Toxicity and similar hazards)	-	-
31(Resistance to Rusting)	-	-
30(Resistance to Heat & Fire)	-	-
29(Clearances, Creepage Distances & Solid Insulation)	-	-
28(Screws & Connections)	-	-
27(Provision For Earthing)	-	-
26(Terminals For External Conductors)	-	-
25(Supply Connection & External Flexible Cords)	-	-
24(Components)	-	-
23(Internal wiring)	-	-
22(Construction)	-	-
21(Mechanical strength)	-	-
20(Stability & Mechanical Hazards)	-	-
19(Abnormal Operation)	-	-
17(Overload Protection/ Overload Protection of Transformers & Associated Circuits)	-	-
16(Leakage Current and Electric Strength)	-	-
15(Moisture Resistance)	-	-
14(Transient Over Voltage)	-	-
13(Leakage Current and Electric Strength at Operating Temperature)	-	-
11(Temperature Rise/ Heating)	-	-
10(Power Input & Current)	-	-
9(Starting Of Motor Operated Appliances)	-	-
8(Protection against access to live parts)	-	-
32(Radiation ,Toxicity and similar hazards)	-	-
31(Resistance to Rusting)	-	-
30(Resistance to Heat & Fire)	-	-
29(Clearances, Creepage Distances & Solid Insulation)	-	-
28(Screws & Connections)	-	-
27(Provision For Earthing)	-	-
26(Terminals For External Conductors)	-	-
25(Supply Connection & External Flexible Cords)	-	-
24(Components)	-	-
23(Internal wiring)	-	-
22(Construction)	-	-
21(Mechanical strength)	-	-
20(Stability & Mechanical Hazards)	-	-
19(Abnormal Operation)	-	-
17(Overload Protection/ Overload Protection of Transformers & Associated Circuits)	-	-
16(Leakage Current and Electric Strength)	-	-
15(Moisture Resistance)	-	-
14(Transient Over Voltage)	-	-
13(Leakage Current and Electric Strength at Operating Temperature)	-	-
11(Temperature Rise/ Heating)	-	-
10(Power Input & Current)	-	-
9(Starting Of Motor Operated Appliances)	-	-
8(Protection against access to live parts)	-	-

08 Feb, 2027

-
Included w.e.f. 02.12.2024 Exclusion: Cl.19.11.4.1 to 19.11.4.7

133

IS 302 : Part 2 : SEC 31 (2009)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 31 range hoods

ALL

64900 View breakup
-

Clause No.	Exclusion	Remark
Clause No - 5(GENERAL CONDITIONS FOR THE TESTS)	-	-
Clause No - 5.18(linear and angular dimension)	-	-
Clause No - 6.2(harmfull ingress of water)	-	-
Clause No - 8.1.1("PROTECTION AGAINST ACCESS TO LIVE PART- test probe B")	-	-
Clause No - 8.1.2("PROTECTION AGAINST ACCESS TO LIVE PART - test probe 13")	-	-
Clause No - 8.2(Addition)	-	-
Clause No - 10.1, Table No. -1(power input deviation)	-	-
Clause No - 13.3("LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE")	-	-
Clause No - 13.3,Table No.- 4(voltage for electrical strength)	-	-
Clause No - 14(Impulse test voltage)	-	-
Clause No - 15.1.1(MOISTURE RESISTANCE)	-	-
Clause No -19.7(test is repeated with the capacitor short circuited)	-	-
Clause No -21.1(Mechanical strength)	-	-
Clause No -22.1(construction)	-	-
Clause No -22.11(push force applied)	-	-
Clause No -24.1.2(safety isolating transformer)	-	-
Clause No -24.1.3(for switches)	-	-
Clause No -24.1.4(for automatic control)	-	-
Clause No -24.1.5(for innterconnection couplers)	-	-
Clause No -24.4(plug and socket)	-	-
Clause No -25.8, Table no -11(conductor resistance)	-	-
Clause No -25.5(dimension for pins)	-	-
Clause No -27.6(for circuit board)	-	-
Clause No -29.2(comparative tracking index)	-	-
Clause No -29.3.3(dry heat test)	-	-
Clause No -30.2.1(glow wire test)	-	-
Clause No -30.101("incorporate combustible material")	-	-

08 Feb, 2027

-
Included w.e.f. 02.12.2024 Exclusion: Cl.19.11.4.1 to 19.11.4.7

134

IS 302 : Part 2 : Sec 7 (2024)

Safety of Household And Similar Electrical Appliances Part 2 Particular Requirements Section 7: Domestic Electric Clothes Washing Machines

ALL

44900 View breakup
-

Clause No.	Exclusion	Remark
4(GENERAL REQUIREMENT)	-	-
6(CLASSIFICATION)	-	-
7(MARKING AND INSTRUCTIONS)	-	-
8(PROTECTION AGAINST ACCESS TO LIVE PARTS)	-	-
10(POWER INPUT AND CURRENT)	-	-
11(HEATING)	-	-
13(LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE)	-	-
14(TRANSIENT OVERVOLTAGES)	-	-
15(MOISTURE RESISTANCE)	-	-
16(LEAKAGE CURRENT AND ELECTRIC STRENGTH)	-	-
17("OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS ")	-	-
17("OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS ")	-	-
18(ENDURANCE)	-	-
19(ABNORMAL OPERATION)	-	-
20(STABILITY AND MECHANICAL HAZARDS)	-	-
21(MECHANICAL STRENGTH)	-	-
22(CONSTRUCTION)	-	-
23(INTERNAL WIRING)	-	-
24(COMPONENTS)	-	-
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CORDS)	-	-
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	-
27(PROVISION FOR EARTHING)	-	-
28(SCREWS AND CONNECTIONS)	-	-
29(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION)	-	-
30(RESISTANCE TO HEAT AND FIRE)	-	-
31(RESISTANCE TO RUSTING)	-	-
19.13(ABNORMAL OPERATION)	-	-
19.101(Abnormal Operation)	-	-
19.102(Abnormal Operation)	-	-

08 Feb, 2027

135

IS 302 : Part 2 : Sec 6 (2009)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 6 cooking ranges, hobs, ovens and similar appliances (First Revision)

ALL

24900 View breakup
-

Clause No.	Exclusion	Remark
6.0(Classification)	-	-
7.0(Marking and instructions)	-	-
8.0(Protection against access to live part test)	-	-
9.0(Starting of motor-operated appliances test)	-	-
10.0(Power Input and current test)	-	-
11.0(Heating test)	-	-
13.0(Leakage current and electric strength test)	-	-
14.0(Transient voltages)	-	-
15.0(Moisture Resistance)	-	-
16.0(Leakage current and electric strength test)	-	-
17.0(Overload protection of transformers test)	-	-
18.0(Endurance test)	-	-
19.0(Abnormal Operations)	-	-
20.0(Stability and Mechanical Hazards)	-	-
21.0(Mechanical Strength)	-	-
22.0(Construction verification related tests)	-	-
23.0(Internal wiring)	-	-
24.0(Components)	-	-
25.0(Supply connections and External Flexible Cords)	-	-
26.0(Terminal for External Conductors)	-	-
27.0(Provision for Earthing)	-	-
28.0(Screws and connections)	-	-
29.0(Clearances and Creepage distances and solid insulation)	-	-
30.0(Resistance to heat and fire)	-	-
31.0(Resistance to rusting)	-	-
32.0(Radiation, Toxicity and Similar hazards)	-	-
4(General Requirements)	-	-
5(General condition for the tests)	-	-

08 Feb, 2027

-
Included w.e.f. 02.12.2024 Exclusion: Cl.19.11.4.1 to 19.11.4.7

136

IS 302 : Part 2 : Sec 30 (2007)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 30 room heaters (First Revision)

ALL

14900 View breakup
-

Clause No.	Exclusion	Remark
Cl.6 (Classification)	-	-
Cl.6 (Classification)	-	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	-
Cl.7(Marking and Instructions)	-	-
Cl.7(Marking and Instructions)	-	-
Cl.7(Marking and Instructions)	-	-
Cl.7.3(Marking and Instructions)	-	-
Cl.7.3(Marking and Instructions)	-	-
Cl.7.3(Marking and Instructions)	-	-
Cl.7.4(Marking and Instructions)	-	-
Cl.7.5(Marking and Instructions)	-	-
Cl.7.6 & IS:302-1:2008(Marking and Instructions)	-	-
Cl.7.8 of IS :302-1:2008(Marking and Instructions)	-	-
Cl.7.9 of IS :302-1:2008(Marking and Instructions)	-	-
Cl.7.10 of IS :302-1:2008(Marking and Instructions)	-	-
Cl.7.11 of IS :302-1:2008(Marking and Instructions)	-	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	-
Cl.7.12.1 & IS:302-1:2009(Marking and Instructions)	-	-
Cl.7.13 of IS 302-1:2008(Marking and Instructions)	-	-
Cl.7.14 of IS302-1:2008(Marking and Instructions)	-	-
Cl.7.14(Marking and Instructions)	-	-
Cl.7.14(Marking and Instructions)	-	-
Cl.7.15 of IS 302-1:2008(Marking and Instructions)	-	-
Cl.7.15 of IS 302-1:2008(Marking and Instructions)	-	-
Cl.7.15 of IS 302-1:2008(Marking and Instructions)	-	-
Cl.7.15 of IS 302-1:2008(Marking and Instructions)	-	-
Cl.7.101(Marking and Instructions)	-	-
Cl.8 & IS:302-1:2008(Protection Against Access to Live Parts)	-	-
Cl.10 & IS:302-1:2008(Power Input and Current)	-	-
Cl.11 & IS:302-1:2008(Heating)	-	-
Cl.11 & IS:302-1:2008(Heating)	-	-
Cl.11 & IS:302-1:2008(Heating)	-	-
Cl.11 & IS:302-1:2008(Heating)	-	-
Cl.11 & IS:302-1:2008(Heating)	-	-
Cl.11 & IS:302-1:2008(Heating)	-	-
Cl.11 & IS:302-1:2008(Heating)	-	-
Cl.11 & IS:302-1:2008(Heating)	-	-
Cl.11 & IS:302-1:2008(Heating)	-	-
Cl.11 & IS:302-1:2008(Heating)	-	-
Cl.11 & IS:302-1:2008(Heating)	-	-
Cl.11 & IS:302-1:2008(Heating)	-	-
Cl.11 & IS:302-1:2008(Heating)	-	-
Cl.11 & IS:302-1:2008(Heating)	-	-
Cl.11 & IS:302-1:2008(Heating)	-	-
Cl.11 & IS:302-1:2008(Heating)	-	-
Cl.11.8(Heating)	-	-
Cl.11.8(Heating)	-	-
Cl.11.8(Heating)	-	-
Cl.13 & IS:302-1:2008(Leakage Current & Electric Strength at operating temp. )	-	-
Cl.13 & IS:302-1:2008(Leakage Current & Electric Strength at operating temp. )	-	-
Cl.14 & IS:302-1:2008(Transient Over Voltages)	-	-
Cl.15 & IS: 302-1:2008(Moisture Resistance )	-	-
Cl.15.3 of IS 302-1:200(Moisture Resistance )	-	-
Cl.16 & IS:302-1:2008(Leakage Current & Electric Strength )	-	-
Cl.16 & IS:302-1:2008(Leakage Current & Electric Strength )	-	-
Cl.17 & IS:302-1:2008(Over load Protection of Transformers and Associated Circuits )	-	-
Cl.18 (Endurance. )	-	-
Cl.19 & IS:302-1:2008(Abnormal Operation.)	-	-
Cl.19 & IS:302-1:2008(Abnormal Operation.)	-	-
Cl.19 & IS:302-1:2008(Abnormal Operation.)	-	-
Cl.19 & IS:302-1:2008(Abnormal Operation.)	-	-
Cl.19.101(Abnormal Operation.)	-	-
Cl.19.102(Abnormal Operation.)	-	-
Cl.19.103(Abnormal Operation.)	-	-
Cl.19.104(Abnormal Operation.)	-	-
Cl.19.105(Abnormal Operation.)	-	-
Cl.19.106(Abnormal Operation.)	-	-
Table 8 of IS 302-1:2008(Abnormal Operation.)	-	-
Cl.19.107(Abnormal Operation.)	-	-
Cl.19.108(Abnormal Operation.)	-	-
Cl.19.109(Abnormal Operation.)	-	-
Cl.19.110(Abnormal Operation.)	-	-
Cl.19.111(Abnormal Operation.)	-	-
Cl.19.112(Abnormal Operation.)	-	-
Cl.19.113(Abnormal Operation.)	-	-
Cl.19.114(Abnormal Operation.)	-	-
Cl.20 & IS:302-1:2008(Stability & Mechanical Hazards)	-	-
Cl.21 & IS:302-1:2008)(Mechanical Strength.)	-	-
Cl.21.2 of IS 302-1:2008(Mechanical Strength.)	-	-
Cl.21.101 (Mechanical Strength.)	-	-
Cl.21.102(Mechanical Strength.)	-	-
Cl.21.103(Mechanical Strength.)	-	-
Cl.22.1 of IS 302-1:2008(Construction)	-	-
Cl.22.5 of IS 302-1:2008(Construction)	-	-
Cl.22.6 of IS 302-1:2008(Construction)	-	-
Cl.22.7 of IS 302-1:2008(Construction)	-	-
Cl.22.8 of IS 302-1:2008(Construction)	-	-
Cl.22.9 of IS 302-1:2008(Construction)	-	-
Cl.22.11(Construction)	-	-
Cl.22.12 of IS 302-1:2008(Construction)	-	-
Cl.22.13 of IS 302-1:2008(Construction)	-	-
Cl.22.14 of IS 302-1:2008(Construction)	-	-
Cl.22.15 of IS 302-1:2008(Construction)	-	-
Cl.22.18 of IS 302-1:2008(Construction)	-	-
Cl.22.20 of IS 302-1:2008(Construction)	-	-
Cl.22.21 of IS 302-1:2008(Construction)	-	-
Cl.23 & IS:302-1:2008(Internal Wiring )	-	-
Cl.23.4 & Cl.29 of 302-1:2008(Internal Wiring )	-	-
Cl.23.5 of 302-1:2008(Internal Wiring )	-	-
Cl.23.7 of 302-1:2008(Internal Wiring )	-	-
C.23.7 of 302-1:2008(Internal Wiring )	-	-
Cl.24.1 of 302-1:2008(Component)	-	-
Cl.24.1 of 302-1:2008(Component)	-	-
Cl.24.1.3 (Component)	-	-
Cl.24.1.3 (Component)	-	-
Cl.24.1.3 (Component)	-	-
Cl.24.1.3 (Component)	-	-
C.24.1.4(Component)	-	-
C.24.2 of 302-1:2008(Component)	-	-
Cl.24.10(Component)	-	-
Cl.25.1 of 302-1:2008(Supply Connection and External Flexible Cords )	-	-
Cl. 25.2 of IS 3021:2008(Supply Connection and External Flexible Cords )	-	-
Cl. 25.3 of IS 302-1:2008(Supply Connection and External Flexible Cords )	-	-
Cl. 25.4 of IS 302-1:2008(Supply Connection and External Flexible Cords )	-	-
Cl.25.5 of 302-1:2008(Supply Connection and External Flexible Cords )	-	-
Cl.25.6 of 302-1:2008(Supply Connection and External Flexible Cords )	-	-
Cl.25.7.(Supply Connection and External Flexible Cords )	-	-
Cl.25.8(Supply Connection and External Flexible Cords )	-	-
Cl. 25.9(Supply Connection and External Flexible Cords )	-	-
Cl.25.10 of 302-1:2008(Supply Connection and External Flexible Cords )	-	-
Cl. 25.11(Supply Connection and External Flexible Cords )	-	-
Cl. 25.12(Supply Connection and External Flexible Cords )	-	-
Cl. 25.13(Supply Connection and External Flexible Cords )	-	-
Cl.25.14 of IS 302-1:2008(Supply Connection and External Flexible Cords )	-	-
Cl.25.15 of IS 302-1:2008(Supply Connection and External Flexible Cords )	-	-
Cl.25.15 of IS 302-1:2008(Supply Connection and External Flexible Cords )	-	-
Cl.25.17 of IS 302-1:2008(Supply Connection and External Flexible Cords )	-	-
Cl.25.18(Supply Connection and External Flexible Cords )	-	-
Cl.25.20(Supply Connection and External Flexible Cords )	-	-
Cl.26.1 of IS 302-1:2008(Terminal for External Conductors )	-	-
Cl.26.10 of IS 302-1:2008(Terminal for External Conductors )	-	-
Cl.26.11 of IS 302-1:2008(Terminal for External Conductors )	-	-
Cl.27.1 of 302-1:2008(Provision for Earthing.)	-	-
Cl.27.5 of 302-1:2008(Provision for Earthing.)	-	-
Cl.28 of 302-1:2008(Screws and Connections.)	-	-
Cl.29 & IS:302-1:2008(Clearances, Creepage Distances and Solid Insulation)	-	-
Cl.29 & IS:302-1:2008(Clearances, Creepage Distances and Solid Insulation)	-	-
Cl.30 & IS:302-1:2008(Resistance to Heat and Fire)	-	-
Cl.30.2.2 of 302-1:2008(Resistance to Heat and Fire)	-	-
Cl.31 & IS:302-1:2008(Resistance to Rusting.)	-	-
Cl.32 & IS:302-1:2008(Radition,Toxicity and similar Hazards.)	-	-
Cl.31 of IS:302-1:2008(Resistance to Rusting.)	-	-
Cl.30.2 of 302-1:2008(Resistance to Heat and Fire : Resistance to fire)	-	-
Cl.30.1 of IS:302-1:2008(Resistance to Heat and Fire: Resistance to heat. )	-	-
Cl.29.2 of IS:302-1:2008(Clearances, Creepage Distances and Solid Insulation : Creepage Distance)	-	-
Cl.29.1 of IS:302-1:2008(Clearances, Creepage Distances and Solid Insulation : Clearance )	-	-
Cl.28 of 302-1:2008(Screws and Connections.)	-	-
Cl.27.5 of 302-1:2008(Provision for Earthing : ECR)	-	-
Cl.27.1 of 302-1:2008(Provision for Earthing )	-	-
Cl.26 of IS 302-1:2008(Terminal for External Conductors )	-	-
Cl.25.20 of 302-1:2008(Supply Connection and External Flexible Cords : Additional insulation )	-	-
Cl.25.18 of 302-1:2008(Supply Connection and External Flexible Cords : Arrangement of cord anchorages )	-	-
Cl.25.15 of IS 302-1:2008(Supply Connection and External Flexible Cords : Cord grip test - displacement)	-	-
Cl.25.15 of IS 302-1:2008(Supply Connection and External Flexible Cords : Cord grip test - strain at terminals )	-	-
Cl. 25.13 of 302-1:2008(Supply Connection and External Flexible Cords : Inlet opening of supply cords )	-	-
Cl. 25.12 of 302-1:2008(Supply Connection and External Flexible Cords : Moulding of cords )	-	-
Cl.25.10 of 302-1:2008(Supply Connection and External Flexible Cords : Colour of earthing wire )	-	-
Cl. 25.9 of 302-1:2008(Supply Connection and External Flexible Cords : Contact with sharp edge )	-	-
Cl.25.8 of 302-1:2008(Supply Connection and External Flexible Cords : Resistance of supply wires )	-	-
Cl.25.7 of IS:302-2-30:2007(Supply Connection and External Flexible Cords : Supply cords material )	-	-
Cl.25.5 of 302-1:2008(Supply Connection and External Flexible Cords : Type of attachments )	-	-
Cl.25.1 of 302-1:2008(Supply Connection and External Flexible Cords : Means of connection )	-	-
Cl.24 of IS:302-2-30:2007(Component)	-	-
Cl.23.7 of 302-1:2008(Internal Wiring : Colour of earting conductor )	-	-
Cl.23 of IS:302-1:2008(Internal Wiring )	-	-
Cl.22.106 of IS:302-2-30:2007(Construction : Checking of thermostats, timers or similar means for visibl glowing radiant heaters)	-	-
Cl.22.106 of IS:302-2-30:2007(Construction : Checking of openings on the underside)	-	-
Cl.22.102 & Cl 22.103 of IS:302-2-30:2007(Construction : Fireguard )	-	-
Cl.22.101 of IS:302-2-30:2007(Construction : Prevention to contact with heating element)	-	-
Cl.22.24 of IS:302-2-30:2007(Construction : test of bare heating element)	-	-
Cl.22.18 of IS 302-1:2008(Construction : Resistance to corrosion )	-	-
Cl.22.15 of IS 302-1:2008(Construction : Storage hooks for flexible cords)	-	-
Cl.22.14 of IS 302-1:2008(Construction : ragged and sharp edges)	-	-
Cl.22.13 of IS 302-1:2008(Construction : Position of handles )	-	-
Cl.22.12 of IS 302-1:2008(Construction : Fixing of Handle, knobs,grips,lever and similer parts )	-	-
Cl.22.11 of IS 302-1:2008(Construction : Fixing of non detachable parts )	-	-
Cl.22.7 of IS:302-2-30:2007(Construction : Pressure test of oil heater )	-	-
Cl.21.101 of IS:302-2-30:2007(Mechanical Strength : fire gaurd deformation test )	-	-
Cl.21.2 of IS 302-1:2008(Mechanical Strength : Pentration by sharp implementation )	-	-
Cl.21.1 of IS:302-1:2008)(Mechanical Strength : Rough handling )	-	-
Cl.20 of IS:302-2-30:2007(Stability of Mechanical Hazards)	-	-
Cl.19.114 of IS:302-2-30:2007(Abnormal Operation : the temp. of the surface of the container for oil heaters )	-	-
Cl.19.112 of IS:302-2-30:2007(Abnormal Operation : Ignition of bleached cotton gauge)	-	-
Cl.19.111 of IS:302-2-30:2007(Abnormal Operation : Ignition of flannelette for Visibly glowing heaters)	-	-
Cl.19.110 of IS:302-2-30:2007(Abnormal Operation : operation against wall for visibly glowing radiant heaters )	-	-
Cl.19.109 of IS:302-2-30:2007(Abnormal Operation : operation against wall for fan heater )	-	-
Cl.19.106 of IS:302-2-30:2007(Abnormal Operation : Locked rotor of fan hetear )	-	-
Cl.19.103 , Cl 19.104 of IS:302-2-30:2007(Abnormal Operation : Operation after Covering by cotton)	-	-
Cl.19 of IS:302-2-30:2007(Abnormal Operation : High Voltage )	-	-
Cl.19 of IS:302-2-30:2007(Abnormal Operation : temp rise of supply cord )	-	-
Cl.19 of IS:302-2-30:2007(Abnormal Operation : Temp rise of test corner )	-	-
Cl.19 of IS:302-1:2008(Abnormal Operation : Emission of molten or poisonous or ignitable gas)	-	-
Cl.16 of IS:302-1:2008(Leakage current and Electric strength (After humidity): Electric Strentgh )	-	-
Cl.16 of IS:302-1:2008(Leakage current and Electric strength (After humidity): Leakage current )	-	-
Cl.15 of IS 302-1:2008(Moisture Resistance )	-	-
Cl.14 of IS:302-1:2008(Transient Over Voltages)	-	-
Cl.13 of IS:302-1:2008(Leakage Current of Electric Strength at operating temp. )	-	-
Cl.13 of IS:302-1:2008(Leakage Current of Electric Strength at operating temp. )	-	-
Cl.11 of IS:302-2:30: 2007(Heating : Room temperature)	-	-
Cl.11.8 of IS:302-2:30: 2007(Heating : For liquid filled radiators the temp. rise of the outer surface of the liquid container)	-	-
Cl.11 of IS:302-2:30: 2007(Heating : Temperature rise in winding)	-	-
Cl.11 of IS:302-2:30: 2007(Heating : Air-outlet grills)	-	-
Cl.11 of IS:302-2:30: 2007(Heating : Surfaces of handles, knobs, grips and similar parts)	-	-
Cl.11 of IS:302-2:30: 2007(Heating : Wooden supports, walls, ceiling and floor of the test corner)	-	-
Cl.11 of IS:302-2:30: 2007(Heating : PVC Insulation )	-	-
Cl.10 of IS:302-1:2008(Power Input and Current)	-	-
Cl.8 of IS:302-1:2008(Protection Against Access to Live Parts)	-	-
Cl.7.101 of IS:302-2:30: 2007(Marking and Instructions : standard mark. )	-	-
Cl.7.15 of IS 302-1:2008(Marking and Instructions : Visibility of marking concerning covering)	-	-
Cl.7.15 of IS 302-1:2008(Marking and Instructions : discernibility from the out side )	-	-
Cl.7.14 of IS:302-2:30: 2007(Marking and Instructions : Height of “Do not cover”)	-	-
Cl.7.14 of IS:302-2:30: 2007(Marking and Instructions : height of symbol)	-	-
Cl.7.14 of IS302-1:2008(Marking and Instructions : Legibility and durability )	-	-
Cl.7.13 of IS 302-1:2008(Marking and Instructions : Languge of instruction and texts )	-	-
Cl.7.11 of IS :302-1:2008(Marking and Instructions : Controls )	-	-
Cl.7.9 of IS :302-1:2008(Marking and Instructions : switches )	-	-
Cl.7.8 of IS :302-1:2008(Marking and Instructions : terminals )	-	-
Cl.7.6 of IS:302-1:2008(Marking and Instructions : Symbols )	-	-
Cl.7.5 of IS:302-1:2008(Marking and Instructions : upper of lower limit of the rated power input )	-	-
Cl 7.1 & Cl.7.6 of IS:302-2:30: 2007(Marking and Instructions : Do not cover )	-	-
Cl.7.1 of IS:302-1:2008(Marking and Instructions : Country of manufacture )	-	-
Cl.7.1 of IS:302-1:2008(Marking and Instructions : Symbol for Class-II )	-	-
Cl.7.1 of IS:302-1:2008(Marking and Instructions : Model or type )	-	-
Cl.7.1 of IS:302-1:2008(Marking and Instructions : Name , trade-mark or identification mark of the manufacturer )	-	-
Cl.7.1 of IS:302-1:2008(Marking and Instructions : rated power input )	-	-
Cl.7.1 of IS:302-1:2008(Marking and Instructions : Nature of supply )	-	-
Cl.7.1 of IS:302-1:2008(Marking and Instructions : Rated Voltage )	-	-

08 Feb, 2027

-
Included w.e.f. 02.12.2024 Exclusion: Cl.19.11.4.1 to 19.11.4.7

137

IS 3614 (2021)

Specification of Fire Doors and Assembly First Revision of IS 3614 Parts 1 2

ALL

490000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Integrity, Insulation)	-	490000	-
Cl 7.2.2(SIZE (width))	-	490000	-
Cl 7.2.2(SIZE (Height))	-	490000	-
Cl 7.3.2(SIZE (width))	-	490000	-
Cl 7.3.2(SIZE (Height))	-	490000	-
Cl 7.4.2(SIZE (width))	-	490000	-
Cl 7.4.2(SIZE (Height))	-	490000	-
Cl 7.5.2(SIZE (width))	-	490000	-
Cl 7.5.2(SIZE (Height))	-	490000	-
7.3.1(MOISTURE CONTENT)	-	490000	-
7.2.7(Vision Pane (Uninsulated door) Width)	-	490000	-
7.2.7(Vision Pane (Uninsulated door) Height)	-	490000	-
7.2.7(Vision Pane (Insulated door) Width)	-	490000	-
7.2.7(Vision Pane (Insulated door) Height)	-	490000	-
7.3.4(Vision Pane (Width))	-	490000	-
7.3.4(Vision Pane (Height))	-	490000	-
Cl-7.2.1(Material)	-	490000	-
Cl-7.2.4(Fire Door Frames)	-	490000	-
Cl-7.2.5(Door Leaf)	-	490000	-
Cl-7.2.8(Louvres)	-	490000	-
Cl-7.2.9(Builder’s Hardware)	-	490000	-
Cl-7.4.3(Construction)	-	490000	-
Cl-7.4.5(Operator)	-	490000	-
Cl-7.5.1(Material)	-	490000	-
Cl-7.5.3(Construction of Sliding Door Leaf)	-	490000	-
Cl-11.3.1(Walls)	-	490000	-
Cl-11.4.1(Closing Devices)	-	490000	-
Cl-11.4.2(Releasing Devices)	-	490000	-
Cl-11.4.3(Hardware)	-	490000	-
Cl-6(VISION PANE ON FIRE DOORS)	-	490000	-
Cl-7.2.3(Construction)	-	490000	-
Cl-7.2.6(Intumescent Seal)	-	490000	-
Cl-7.3.6(Builder’s Hardware)	-	490000	-
Cl-7.4.4(General Requirement of Fire Rated Rolling Shutter)	-	490000	-
Cl-7.5.4(General Requirement of Fire Rated Sliding Door)	-	490000	-
Cl-7.6(General Requirement of Fire Doors)	-	490000	-
Cl-7.3.3(Construction)	-	490000	-
4(Integrity, Insulation)	-	0	-
Cl 7.2.2(SIZE (width))	-	0	-
Cl 7.2.2(SIZE (Height))	-	0	-
Cl 7.3.2(SIZE (width))	-	0	-
Cl 7.3.2(SIZE (Height))	-	0	-
Cl 7.4.2(SIZE (width))	-	0	-
Cl 7.4.2(SIZE (Height))	-	0	-
Cl 7.5.2(SIZE (width))	-	0	-
Cl 7.5.2(SIZE (Height))	-	0	-
7.3.1(MOISTURE CONTENT)	-	0	-
7.2.7(Vision Pane (Uninsulated door) Width)	-	0	-
7.2.7(Vision Pane (Uninsulated door) Height)	-	0	-
7.2.7(Vision Pane (Insulated door) Width)	-	0	-
7.2.7(Vision Pane (Insulated door) Height)	-	0	-
7.3.4(Vision Pane (Width))	-	0	-
7.3.4(Vision Pane (Height))	-	0	-
Cl-7.2.1(Material)	-	0	-
Cl-7.2.4(Fire Door Frames)	-	0	-
Cl-7.2.5(Door Leaf)	-	0	-
Cl-7.2.8(Louvres)	-	0	-
Cl-7.2.9(Builder’s Hardware)	-	0	-
Cl-7.4.3(Construction)	-	0	-
Cl-7.4.5(Operator)	-	0	-
Cl-7.5.1(Material)	-	0	-
Cl-7.5.3(Construction of Sliding Door Leaf)	-	0	-
Cl-11.3.1(Walls)	-	0	-
Cl-11.4.1(Closing Devices)	-	0	-
Cl-11.4.2(Releasing Devices)	-	0	-
Cl-11.4.3(Hardware)	-	0	-
Cl-6(VISION PANE ON FIRE DOORS)	-	0	-
Cl-7.2.3(Construction)	-	0	-
Cl-7.2.6(Intumescent Seal)	-	0	-
Cl-7.3.6(Builder’s Hardware)	-	0	-
Cl-7.4.4(General Requirement of Fire Rated Rolling Shutter)	-	0	-
Cl-7.5.4(General Requirement of Fire Rated Sliding Door)	-	0	-
Cl-7.6(General Requirement of Fire Doors)	-	0	-
Cl-7.3.3(Construction)	-	0	-
Cl-7.4(Avg closing speed of fire rated rolling shutters)	-	0	-

08 Feb, 2027

-
Included w.e.f. 01.04.2025

138

IS 4250 (1980)

Specification for domestic electric food - Mixers (Liquidizers And Grinders) (First Revision)

23500 View breakup
-

Clause No.	Exclusion	Remark
6(Classification- IS 302-1 )	-	-
6(Classification- IS 302-1)	-	-
7.1(Marking- IS 302-1)	-	-
7.1(Marking- IS 302-1)	-	-
7.1(Marking- IS 302-1)	-	-
7.1(Marking- IS 302-1)	-	-
7.1(Marking- IS 302-1)	-	-
7.1(Marking- IS 302-1)	-	-
7.1(Marking- IS 302-1)	-	-
7.1(Marking- IS 302-1)	-	-
7.1(Marking- IS 302-1)	-	-
7.1(Marking- IS 302-1)	-	-
7.1(Marking- IS 302-1)	-	-
7.1(Marking- IS 302-1)	-	-
7.1(Marking- IS 302-1)	-	-
7.2(Marking)	-	-
7.1(Marking- IS 302-1)	-	-
7.1(Marking- IS 302-1)	-	-
7.1(Marking- IS 302-1)	-	-
7.4(Marking)	-	-
7.5(Marking)	-	-
7.6(Marking)	-	-
8( Protection Against Electric Shock, IS 302-1)	-	-
9(Starting, IS 302-1)	-	-
10(Power Input and Current, IS 302-1)	-	-
11(Heating, IS 302-1)	-	-
11(Heating, IS 302-1)	-	-
11(Heating, IS 302-1)	-	-
11(Heating, IS 302-1)	-	-
11(Heating, IS 302-1)	-	-
13(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	-
13(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	-
14(Transient Over Voltages, IS 302-1)	-	-
15.1(Moisture Resistance, IS 302-1)	-	-
15.2(Moisture Resistance-Spillage test)	-	-
15(Moisture Resistance, IS 302-1)	-	-
16(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	-
16(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	-
19(Abnormal Operation, IS 302-1)	-	-
19(Abnormal Operation, IS 302-1)	-	-
19(Abnormal Operation, IS 302-1)	-	-
19(Abnormal Operation, IS 302-1)	-	-
20(Stability & Mechanical Hazards, IS 302-1)	-	-
20(Stability & Mechanical Hazards, IS 302-1)	-	-
21(Mechanical Strength, IS 302-1)	-	-
21(Mechanical Strength, IS 302-1)	-	-
22.1(Construction, IS 302-1)	-	-
22.2(Construction)	-	-
22.3(Construction)	-	-
22.4(Construction)	-	-
22.5(Construction)	-	-
22.6(Construction)	-	-
22.8(Construction)	-	-
22.9(Construction)	-	-
22.1(Construction)	-	-
23(Internal Wiring, IS 302-1)	-	-
23(Internal Wiring, IS 302-1)	-	-
23(Internal Wiring, IS 302-1)	-	-
23(Internal Wiring, IS 302-1)	-	-
23(Internal Wiring, IS 302-1)	-	-
23(Internal Wiring, IS 302-1)	-	-
23(Internal Wiring, IS 302-1)	-	-
23(Internal Wiring, IS 302-1)	-	-
23(Internal Wiring, IS 302-1)	-	-
23(Internal Wiring, IS 302-1)	-	-
24.1(Components, IS 302-1)	-	-
24.1(Components, IS 302-1)	-	-
24.1(Components, IS 302-1)	-	-
24.1(Components, IS 302-1)	-	-
24.2(Components)	-	-
24.4(Components)	-	-
24.5(Components)	-	-
24.6(Components)	-	-
24.7(Components)	-	-
24.8(Components)	-	-
24.9(Components)	-	-
25(Supply Connection and External Flexible Cords, IS 302-1)	-	-
25(Supply Connection and External Flexible Cords, IS 302-1)	-	-
25(Supply Connection and External Flexible Cords, IS 302-1)	-	-
25(Supply Connection and External Flexible Cords, IS 302-1)	-	-
25(Supply Connection and External Flexible Cords, IS 302-1)	-	-
25(Supply Connection and External Flexible Cords, IS 302-1)	-	-
25(Supply Connection and External Flexible Cords, IS 302-1)	-	-
25(Supply Connection and External Flexible Cords, IS 302-1)	-	-
25(Supply Connection and External Flexible Cords, IS 302-1)	-	-
25(Supply Connection and External Flexible Cords, IS 302-1)	-	-
25(Supply Connection and External Flexible Cords, IS 302-1)	-	-
25(Supply Connection and External Flexible Cords, IS 302-1)	-	-
25(Supply Connection and External Flexible Cords, IS 302-1)	-	-
25(Supply Connection and External Flexible Cords, IS 302-1)	-	-
25(Supply Connection and External Flexible Cords, IS 302-1)	-	-
25(Supply Connection and External Flexible Cords, IS 302-1)	-	-
25(Supply Connection and External Flexible Cords, IS 302-1)	-	-
26(Terminals for External Conductors, IS 302-1)	-	-
27(Provision for Earthing, IS 302-1)	-	-
27(Provision for Earthing, IS 302-1)	-	-
27(Provision for Earthing, IS 302-1)	-	-
27(Provision for Earthing, IS 302-1)	-	-
27(Provision for Earthing, IS 302-1)	-	-
28(Screws & Connections, IS 302-1)	-	-
29(Clearances and Distances through Insulation, IS 302-1)	-	-
29(Clearances and Distances through Insulation, IS 302-1)	-	-
30(Resistance to Heat, Fire, Tracking, IS 302-1)	-	-
30(Resistance to Heat, Fire, Tracking, IS 302-1)	-	-
31(Resistance of Rusting, IS 302-1)	-	-
34.2(Operational tests- Grinding coffee (for machines which have a dry grinding arrangement))	-	-
34.2(Operational tests- Grinding coffee (for machines which have a dry grinding arrangement))	-	-
34.2(Operational tests- Grinding coffee (for machines which have a dry grinding arrangement))	-	-
34.3(Whisking egg whites )	-	-
34.4(IDLI batter-Grinding of black gram)	-	-
34.4(IDLI batter-Grinding of rice)	-	-
34.4(IDLI batter-Grinding of rice)	-	-
34.4(IDLI batter-Grinding of rice)	-	-
34.5.1 (a)(Operational test for juicers )	-	-
34.5.1 (b)(Operational test for juicers )	-	-
34.5.2(Operational test for juicers )	-	-
35(Temperature withstand test for bowl)	-	-
36(Test for controls )	-	-
37(Strength of Assembly )	-	-
37(Strength of Assembly )	-	-
Cl 37(Strength of assembly)	-	-
Cl 36(Test for controls)	-	-
Cl 35(Temperature withstand test for bowl)	-	-
Cl 34(Operational Tests)	-	-
Cl.32(Radiation, toxicity and similar hazards)	-	-
Cl.31(Resistance to rusting)	-	-
Cl.30(Resistance to heat and fire)	-	-
CL.29(Clearances, Creepage distances and Solid Insulation)	-	-
Cl.28(Screws and connections)	-	-
Cl.27(Provision for Earthing)	-	-
Cl.26(Terminals for external conductors)	-	-
Cl.25(Supply connection and external flexible cords)	-	-
Cl.24(Components)	-	-
Cl.23(Internal wiring)	-	-
Cl.22(Construction)	-	-
Cl.21(Mechanical Strength)	-	-
Cl.20(Stability & Mechanical Hazards)	-	-
Cl.19(Abnormal operation)	-	-
Cl.18(Endurance)	-	-
Cl. 16(Leakage current and Electric strength)	-	-
Cl.15(Moisture Resistance)	-	-
Cl.14(Transient Over voltage)	-	-
Cl.13(Leakage current and Electric strength at operating temperature)	-	-
Cl.11(Temperature rise/ Heating)	-	-
Cl.10(Power Input and Current)	-	-
Cl.8(Protection against access to live parts/ Protection against electric shock)	-	-
Cl. 7(Marking and instructions)	-	-
Cl. 6(Classification)	-	-
3(GENERAL REQUIREMENTS)	-	-
4(GENERAL NOTES ON TESTS)	-	-
5(RATING)	-	-
19.11.4.1(Electrostatic discharges)	-	-
19.11.4.2(Radiated fields)	-	-
19.11.4.3(Fast transient bursts)	-	-
19.11.4.4(Surge immunity test)	-	-
19.11.4.5(Immunity to conducted discharges)	-	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	-
19.11.4.7(Harmonics)	-	-
6(Classification- IS 302-1 )	-	-
6(Classification- IS 302-1)	-	-
7.1(Marking- IS 302-1)	-	-
7.1(Marking- IS 302-1)	-	-
7.1(Marking- IS 302-1)	-	-
7.1(Marking- IS 302-1)	-	-
7.1(Marking- IS 302-1)	-	-
7.1(Marking- IS 302-1)	-	-
7.1(Marking- IS 302-1)	-	-
7.1(Marking- IS 302-1)	-	-
7.1(Marking- IS 302-1)	-	-
7.1(Marking- IS 302-1)	-	-
7.1(Marking- IS 302-1)	-	-
7.1(Marking- IS 302-1)	-	-
7.1(Marking- IS 302-1)	-	-
7.2(Marking)	-	-
7.1(Marking- IS 302-1)	-	-
7.1(Marking- IS 302-1)	-	-
7.1(Marking- IS 302-1)	-	-
7.4(Marking)	-	-
7.5(Marking)	-	-
7.6(Marking)	-	-
8( Protection Against Electric Shock, IS 302-1)	-	-
9(Starting, IS 302-1)	-	-
10(Power Input and Current, IS 302-1)	-	-
11(Heating, IS 302-1)	-	-
11(Heating, IS 302-1)	-	-
11(Heating, IS 302-1)	-	-
11(Heating, IS 302-1)	-	-
11(Heating, IS 302-1)	-	-
13(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	-
13(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	-
14(Transient Over Voltages, IS 302-1)	-	-
15.1(Moisture Resistance, IS 302-1)	-	-
15.2(Moisture Resistance-Spillage test)	-	-
15(Moisture Resistance, IS 302-1)	-	-
16(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	-
16(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	-
19(Abnormal Operation, IS 302-1)	-	-
19(Abnormal Operation, IS 302-1)	-	-
19(Abnormal Operation, IS 302-1)	-	-
19(Abnormal Operation, IS 302-1)	-	-
20(Stability & Mechanical Hazards, IS 302-1)	-	-
20(Stability & Mechanical Hazards, IS 302-1)	-	-
21(Mechanical Strength, IS 302-1)	-	-
21(Mechanical Strength, IS 302-1)	-	-
22.1(Construction, IS 302-1)	-	-
22.2(Construction)	-	-
22.3(Construction)	-	-
22.4(Construction)	-	-
22.5(Construction)	-	-
22.6(Construction)	-	-
22.8(Construction)	-	-
22.9(Construction)	-	-
22.1(Construction)	-	-
23(Internal Wiring, IS 302-1)	-	-
23(Internal Wiring, IS 302-1)	-	-
23(Internal Wiring, IS 302-1)	-	-
23(Internal Wiring, IS 302-1)	-	-
23(Internal Wiring, IS 302-1)	-	-
23(Internal Wiring, IS 302-1)	-	-
23(Internal Wiring, IS 302-1)	-	-
23(Internal Wiring, IS 302-1)	-	-
23(Internal Wiring, IS 302-1)	-	-
23(Internal Wiring, IS 302-1)	-	-
24.1(Components, IS 302-1)	-	-
24.1(Components, IS 302-1)	-	-
24.1(Components, IS 302-1)	-	-
24.1(Components, IS 302-1)	-	-
24.2(Components)	-	-
24.4(Components)	-	-
24.5(Components)	-	-
24.6(Components)	-	-
24.7(Components)	-	-
24.8(Components)	-	-
24.9(Components)	-	-
25(Supply Connection and External Flexible Cords, IS 302-1)	-	-
25(Supply Connection and External Flexible Cords, IS 302-1)	-	-
25(Supply Connection and External Flexible Cords, IS 302-1)	-	-
25(Supply Connection and External Flexible Cords, IS 302-1)	-	-
25(Supply Connection and External Flexible Cords, IS 302-1)	-	-
25(Supply Connection and External Flexible Cords, IS 302-1)	-	-
25(Supply Connection and External Flexible Cords, IS 302-1)	-	-
25(Supply Connection and External Flexible Cords, IS 302-1)	-	-
25(Supply Connection and External Flexible Cords, IS 302-1)	-	-
25(Supply Connection and External Flexible Cords, IS 302-1)	-	-
25(Supply Connection and External Flexible Cords, IS 302-1)	-	-
25(Supply Connection and External Flexible Cords, IS 302-1)	-	-
25(Supply Connection and External Flexible Cords, IS 302-1)	-	-
25(Supply Connection and External Flexible Cords, IS 302-1)	-	-
25(Supply Connection and External Flexible Cords, IS 302-1)	-	-
25(Supply Connection and External Flexible Cords, IS 302-1)	-	-
25(Supply Connection and External Flexible Cords, IS 302-1)	-	-
26(Terminals for External Conductors, IS 302-1)	-	-
27(Provision for Earthing, IS 302-1)	-	-
27(Provision for Earthing, IS 302-1)	-	-
27(Provision for Earthing, IS 302-1)	-	-
27(Provision for Earthing, IS 302-1)	-	-
27(Provision for Earthing, IS 302-1)	-	-
28(Screws & Connections, IS 302-1)	-	-
29(Clearances and Distances through Insulation, IS 302-1)	-	-
29(Clearances and Distances through Insulation, IS 302-1)	-	-
30(Resistance to Heat, Fire, Tracking, IS 302-1)	-	-
30(Resistance to Heat, Fire, Tracking, IS 302-1)	-	-
31(Resistance of Rusting, IS 302-1)	-	-
34.2(Operational tests- Grinding coffee (for machines which have a dry grinding arrangement))	-	-
34.2(Operational tests- Grinding coffee (for machines which have a dry grinding arrangement))	-	-
34.2(Operational tests- Grinding coffee (for machines which have a dry grinding arrangement))	-	-
34.3(Whisking egg whites )	-	-
34.4(IDLI batter-Grinding of black gram)	-	-
34.4(IDLI batter-Grinding of rice)	-	-
34.4(IDLI batter-Grinding of rice)	-	-
34.4(IDLI batter-Grinding of rice)	-	-
34.5.1 (a)(Operational test for juicers )	-	-
34.5.1 (b)(Operational test for juicers )	-	-
34.5.2(Operational test for juicers )	-	-
35(Temperature withstand test for bowl)	-	-
36(Test for controls )	-	-
37(Strength of Assembly )	-	-
37(Strength of Assembly )	-	-
Cl 37(Strength of assembly)	-	-
Cl 36(Test for controls)	-	-
Cl 35(Temperature withstand test for bowl)	-	-
Cl 34(Operational Tests)	-	-
Cl.32(Radiation, toxicity and similar hazards)	-	-
Cl.31(Resistance to rusting)	-	-
Cl.30(Resistance to heat and fire)	-	-
CL.29(Clearances, Creepage distances and Solid Insulation)	-	-
Cl.28(Screws and connections)	-	-
Cl.27(Provision for Earthing)	-	-
Cl.26(Terminals for external conductors)	-	-
Cl.25(Supply connection and external flexible cords)	-	-
Cl.24(Components)	-	-
Cl.23(Internal wiring)	-	-
Cl.22(Construction)	-	-
Cl.21(Mechanical Strength)	-	-
Cl.20(Stability & Mechanical Hazards)	-	-
Cl.19(Abnormal operation)	-	-
Cl.18(Endurance)	-	-
Cl. 16(Leakage current and Electric strength)	-	-
Cl.15(Moisture Resistance)	-	-
Cl.14(Transient Over voltage)	-	-
Cl.13(Leakage current and Electric strength at operating temperature)	-	-
Cl.11(Temperature rise/ Heating)	-	-
Cl.10(Power Input and Current)	-	-
Cl.8(Protection against access to live parts/ Protection against electric shock)	-	-
Cl. 7(Marking and instructions)	-	-
Cl. 6(Classification)	-	-
3(GENERAL REQUIREMENTS)	-	-
4(GENERAL NOTES ON TESTS)	-	-
5(RATING)	-	-
19.11.4.1(Electrostatic discharges)	-	-
19.11.4.2(Radiated fields)	-	-
19.11.4.3(Fast transient bursts)	-	-
19.11.4.4(Surge immunity test)	-	-
19.11.4.5(Immunity to conducted discharges)	-	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	-
19.11.4.7(Harmonics)	-	-

08 Feb, 2027

-
Included w.e.f. 02.12.2024

139

IS 3854 (2023)

Switches for Domestic and Similar Purposes - Specification (Third Revision)

18500 View breakup
-

Clause No.	Exclusion	Remark
Cl-4(General Requirements)	-	-
Cl-5(General notes on tests)	-	-
Cl-6(Rating)	-	-
Cl-7(Classification)	-	-
Cl-8(Marking)	-	-
Cl-9(Checking of dimensions)	-	-
Cl-10.1, 10.2(Prevention of Access to Live Parts)	-	-
Cl-10.3(Requirements for Accessible Metal Parts)	-	-
Cl-10.4(Requirements for Insulation of the Mechanism)	-	-
Cl. 10.5(Requirements for Insulation of the Mechanism with Respect to the Surrounding Environment)	-	-
Cl-10.6(Requirements for Switches Operated Indirectly)	-	-
Cl-10.7(Requirements for Switches with Replaceable Pull Cord)	-	-
Cl-11(Provision for earthing)	-	-
Cl-12(Terminals)	-	-
Cl-13(Constructional requirements)	-	-
Cl-14(Mechanism)	-	-
Cl-15.1(Resistance to Ageing)	-	-
Cl-15.2(Protection Provided by Enclosures of Switches)	-	-
Cl-15.3(Resistance to Humidity)	-	-
Cl-16.1(General)	-	-
Cl-16.2(Test for Measuring the Insulation Resistance)	-	-
Cl-16.3(Electric Strength Test)	-	-
Cl-17(Temperature rise)	-	-
Cl-18(Making and breaking capacity)	-	-
Cl-19(Normal operation)	-	-
Cl-20(Mechanical strength)	-	-
Cl-21(Resistance to heat)	-	-
Cl-22(Screws, current carrying parts and connections)	-	-
Cl-23(Creepage distances, clearances and distance through sealing compound)	-	-
Cl-24.1(Resistance to abnormal heat and fire)	-	-
Cl-24.2(Resistance to tracking)	-	-
Cl-25(Resistance to rusting)	-	-

08 Feb, 2027

-
Included w.e.f. 02.12.2024

140

IS 779 (1994)

Water meters (Domestic Type) - Specification (Sixth Revision)

all

26800 View breakup
-

Clause No.	Exclusion	Remark
13(Marking)	-	-
4(Nominal Size)	-	-
5(Classes of Water meter)	-	-
7(Construction)	-	-
7.2(i) Body)	-	-
7.3(Registration Box)	-	-
7.4(Cap)	-	-
7.5(Connections )	-	-
7.6(Strainers)	-	-
7.7(Impeller and pistons)	-	-
7.8(Impeller, Chamber and Measuring Chamber )	-	-
7.9(Gears & Pinions )	-	-
7.1(Bearings)	-	-
7.11(Counter)	-	-
7.12(Dial)	-	-
7.13(Regulator)	-	-
7.14(Sealing)	-	-
7.15(Frost protection device)	-	-
8.1 & 8.2(Indicating device)	-	-
8.3(Value of verification Scale division )	-	-
8.4(Acceleration Device)	-	-
9.1, table 2(i)Threads )	-	-
9.1, table 3(ii)Thread Length ‘a’ )	-	-
9.1, table 4( ‘b’ )	-	-
9.1, table 5(iii) Overall Length (with nipple))	-	-
9.1, table 6(iv)Overall Width )	-	-
9.1, table 7(v)Overall Height H1)	-	-
9.1, table 8( H2 )	-	-
10.1(Pressure tightness)	-	-
10.2(Loss of pressure)	-	-
11.1(Metering Accuracy)	-	-
11.2(Min. Starting flow)	-	-
10.3(Temp. suitability )	-	-
10.1(Pressure tightness)	-	-
10.2(Loss of pressure)	-	-
11.1(Metering Accuracy)	-	-
12.4.3(Construction)	-	-
12.4.4(Life test )	-	-
10.1(Pressure tightness)	-	-
10.2(Loss of pressure)	-	-
11.1(Metering Accuracy)	-	-
11.2(Min. Starting flow)	-	-
10.3(Temp. suitability )	-	-
10.1(Pressure tightness)	-	-
10.2(Loss of pressure)	-	-
11.1(Metering Accuracy)	-	-
12.4.2(Construction)	-	-
13(Marking)	-	-
4(Nominal Size)	-	-
5(Classes of Water meter)	-	-
7(Construction)	-	-
7.2(i) Body)	-	-
7.3(Registration Box)	-	-
7.4(Cap)	-	-
7.5(Connections )	-	-
7.6(Strainers)	-	-
7.8(Impeller, Chamber and Measuring Chamber )	-	-
7.9(Gears & Pinions )	-	-
7.1(Bearings)	-	-
7.11(Counter)	-	-
7.12(Dial)	-	-
7.13(Regulator)	-	-
7.14(Sealing)	-	-
7.15(Frost protection device)	-	-
8.1 & 8.2(Indicating device)	-	-
8.3(Value of verification Scale division )	-	-
8.4(Acceleration Device)	-	-
9.1, table 2(i)Threads )	-	-
9.1, table 3(ii)Thread Length ‘a’ )	-	-
9.1, table 4( ‘b’ )	-	-
9.1, table 5(iii) Overall Length (with nipple))	-	-
9.1, table 6(iv)Overall Width )	-	-
9.1, table 7(v)Overall Height H1)	-	-
9.1, table 8( H2 )	-	-
10.1(Pressure tightness)	-	-
10.2(Loss of pressure)	-	-
11.1(Metering Accuracy)	-	-
11.2(Min. Starting flow)	-	-
10.3(Temp. suitability )	-	-
10.1(Pressure tightness)	-	-
10.2(Loss of pressure)	-	-
11.1(Metering Accuracy)	-	-
12.4.3(Construction)	-	-
12.4.4(Life test )	-	-
10.1(Pressure tightness)	-	-
10.2(Loss of pressure)	-	-
11.1(Metering Accuracy)	-	-
11.2(Min. Starting flow)	-	-
10.3(Temp. suitability )	-	-
10.1(Pressure tightness)	-	-
10.2(Loss of pressure)	-	-
11.1(Metering Accuracy)	-	-
12.4.2(Construction)	-	-
13(Marking)	-	-
4(Nominal Size)	-	-
5(Classes of Water meter)	-	-
7(Construction)	-	-
7.2(i) Body)	-	-
7.3(Registration Box)	-	-
7.4(Cap)	-	-
7.5(Connections )	-	-
7.6(Strainers)	-	-
7.7(Impeller and pistons)	-	-
7.8(Impeller, Chamber and Measuring Chamber )	-	-
7.9(Gears & Pinions )	-	-
7.1(Bearings)	-	-
7.11(Counter)	-	-
7.12(Dial)	-	-
7.13(Regulator)	-	-
7.14(Sealing)	-	-
7.15(Frost protection device)	-	-
8.1 & 8.2(Indicating device)	-	-
8.3(Value of verification Scale division )	-	-
8.4(Acceleration Device)	-	-
9.1, table 2(i)Threads )	-	-
9.1, table 3(ii)Thread Length ‘a’ )	-	-
9.1, table 4( ‘b’ )	-	-
9.1, table 5(iii) Overall Length (with nipple))	-	-
9.1, table 6(iv)Overall Width )	-	-
9.1, table 7(v)Overall Height H1)	-	-
9.1, table 8( H2 )	-	-
10.1(Pressure tightness)	-	-
10.2(Loss of pressure)	-	-
11.1(Metering Accuracy)	-	-
11.2(Min. Starting flow)	-	-
10.3(Temp. suitability )	-	-
10.1(Pressure tightness)	-	-
10.2(Loss of pressure)	-	-
11.1(Metering Accuracy)	-	-
12.4.3(Construction)	-	-
12.4.4(Life test )	-	For Life Cycle Test:-Rs. 58000 upto 25 mm, Above 25 mm: Rs.76000
10.1(Pressure tightness)	-	-
10.2(Loss of pressure)	-	-
11.1(Metering Accuracy)	-	-
11.2(Min. Starting flow)	-	-
10.3(Temp. suitability )	-	-
10.1(Pressure tightness)	-	-
10.2(Loss of pressure)	-	-
11.1(Metering Accuracy)	-	-
12.4.2(Construction)	-	-
7.7(Impeller and pistons)	-	For Life Cycle Test:-Rs. 58000 upto 25 mm, Above 25 mm: Rs.76000

08 Feb, 2027

-
Included w.e.f. 10.04.2024

141

IS 374 (2019)

Specification for electric ceiling type fans and regulators (Third Revision)

26250 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	0	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	0	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	0	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	0	-
8.1(Marking (as per Cl. 7 of IS 302-2-80:2017))	-	0	-
8.1,a(Marking )	-	0	-
8.1,b(Marking )	-	0	-
8.1,c(Marking )	-	0	-
8.1,d(Marking )	-	0	-
8.1,e(Marking )	-	0	-
8.1,f(Marking )	-	0	-
8.1,g(Marking )	-	0	-
8.2(Marking )	-	0	-
8.3,a(Marking )	-	0	-
8.3,b(Marking )	-	0	-
8.3,c(Marking )	-	0	-
8.3,d(Marking )	-	0	-
8.3,e(Marking )	-	0	-
8.4(Marking )	-	0	-
8(Marking (as per Cl. 7.1 of IS 302-2-80:2017))	-	0	-
8(Marking (as per Cl. 7 of IS 302-2-80:2017, Cl.7.1 (f) of IS 302-1:2008))	-	0	-
8(Marking (as per Cl. 7 of IS 302-2-80:2017, Cl.7.1(g) of IS 302-1:2008))	-	0	-
8(Marking (as per Cl.7.12.1(a) of IS 302-2-80:2017))	-	0	-
6.2(Rating)	-	0	-
9(Protection against access to live parts (as per Cl.8 of IS 302-2-80 :2017))	-	0	-
9(Power Input & current (as per Cl.10 of IS 302-2-80 :2017))	-	0	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	0	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	0	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	0	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	0	-
9(Leakage current and Electric strength at operating temperature (as per Cl.13 of IS 302-2-80 :2017))	-	0	-
9(Leakage current and Electric strength at operating temperature (as per Cl.13 of IS 302-2-80 :2017))	-	0	-
9(Transient over Voltage (as per Cl.14 of IS 302-2-80 :2017))	-	0	-
9(Moisture Resistance (After Humidity test) (as per Cl.15 & Cl.16 of IS 302-2-80 :2017) )	-	0	-
9(Moisture Resistance (After Humidity test) (as per Cl.15 & Cl.16 of IS 302-2-80 :2017) )	-	0	-
9(Overload protection of transformers and associated circuits (as per Cl.17 of IS 302-2-80 :2017))	-	0	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	0	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	0	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	0	-
9(Staibilty and mechanical hazards (as per Cl.20.102, Table 101 of IS 302-2-80 :2017))	-	0	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017 and Cl.21.1 of IS 302-2:2008))	-	0	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017 and Cl.21.1 of IS 302-2:2008))	-	0	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017))	-	0	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	0	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	0	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	0	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	0	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	0	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	0	-
9(Construction (as per Cl.22.101 of IS 302-2-80 :2017))	-	0	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	0	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	0	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	0	-
9(Components (as per Cl.24.103 of IS 302-2-80 :2017))	-	0	-
9(Components (as per Cl.24.104 of IS 302-2-80 :2017))	-	0	-
9(Supply Connection and External Flexible cords (as per Cl.25 of IS 302-2-80 :2017))	-	0	-
9(Terminals for External conductors (as per Cl.26 of IS 302-2-80 :2017))	-	0	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	33800	Complete Testing Charges
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	0	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	0	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	0	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	0	-
9(Screw and connections (as per Cl.28 of IS 302-2-80 :2017))	-	0	-
9(Clearances, creepage distances and solid insulation (as per Cl.29 of IS 302-2-80 :2017))	-	0	-
9(Clearances, creepage distances and solid insulation (as per Cl.29 of IS 302-2-80 :2017))	-	0	-
9(Resistance to fire (Glow wire Test) (as per Cl.30 of IS 302-2-80 :2017))	-	0	-
9(Resistance to rusting (as per Cl.31 of IS 302-2-80 :2017))	-	0	-
9(Radiation, Toxicity and similar Hazards (Cl.32 of IS 302-2-80 :2017))	-	0	-
10.1(Speed Regulators)	-	0	-
10.2(Speed Regulators)	-	0	-
10.2(Speed Regulators)	-	0	-
10.2(Speed Regulators)	-	0	-
10.3(Speed Regulators)	-	0	-
10.4(Speed Regulators)	-	0	-
10.5(Speed Regulators)	-	0	-
10.6(Speed Regulators)	-	0	-
10.7(Speed Regulators)	-	0	-
10.7(Speed Regulators)	-	0	-
10.8(Speed Regulators)	-	0	-
11.1(Starting)	-	0	-
11.2(Starting)	-	0	-
12(Interchangeability)	-	0	-
13(Silent Operation)	-	0	-
14.3 & Table 1(Test for Air Performance)	-	0	-
14.3 & Table 1(Test for Air Performance)	-	0	-
14.4(Measurement of Speed of the Fan )	-	0	-
14.4(Measurement of Speed of the Fan )	-	0	-
14.5(Measurement of Power factor and Power Input)	-	0	-
14.5(Measurement of Power factor and Power Input)	-	0	-
16(Endurance Test)	-	0	-
16(Endurance Test)	-	0	-
16(Endurance Test)	-	0	-
16(Endurance Test)	-	0	-
16(Endurance Test)	-	0	-
16(Endurance Test)	-	0	-
17(Test for Harmonic Distortion)	-	0	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	0	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	0	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	0	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	0	-
8.1(Marking (as per Cl. 7 of IS 302-2-80:2017))	-	0	-
8.1,a(Marking )	-	0	-
8.1,b(Marking )	-	0	-
8.1,c(Marking )	-	0	-
8.1,d(Marking )	-	0	-
8.1,e(Marking )	-	0	-
8.1,f(Marking )	-	0	-
8.1,g(Marking )	-	0	-
8.2(Marking )	-	0	-
8.3(Marking )	-	0	-
8.3,a(Marking )	-	0	-
8.3,b(Marking )	-	0	-
8.3,c(Marking )	-	0	-
8.3,d(Marking )	-	0	-
8.3,e(Marking )	-	0	-
8.4(Marking )	-	0	-
8(Marking (as per Cl. 7.1 of IS 302-2-80:2017))	-	0	-
8(Marking (as per Cl. 7 of IS 302-2-80:2017, Cl.7.1 (f) of IS 302-1:2008))	-	0	-
8(Marking (as per Cl. 7 of IS 302-2-80:2017, Cl.7.1(g) of IS 302-1:2008))	-	0	-
8(Marking (as per Cl.7.12.1(a) of IS 302-2-80:2017))	-	0	-
6.2(Rating)	-	0	-
9(Protection against access to live parts (as per Cl.8 of IS 302-2-80 :2017))	-	0	-
9(Power Input & current (as per Cl.10 of IS 302-2-80 :2017))	-	0	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	0	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	0	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	0	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	0	-
9(Leakage current and Electric strength at operating temperature (as per Cl.13 of IS 302-2-80 :2017))	-	0	-
9(Leakage current and Electric strength at operating temperature (as per Cl.13 of IS 302-2-80 :2017))	-	0	-
9(Transient over Voltage (as per Cl.14 of IS 302-2-80 :2017))	-	0	-
9(Moisture Resistance (After Humidity test) (as per Cl.15 & Cl.16 of IS 302-2-80 :2017) )	-	0	-
9(Moisture Resistance (After Humidity test) (as per Cl.15 & Cl.16 of IS 302-2-80 :2017) )	-	0	-
9(Overload protection of transformers and associated circuits (as per Cl.17 of IS 302-2-80 :2017))	-	0	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	0	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	0	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	0	-
9(Staibilty and mechanical hazards (as per Cl.20.102, Table 101 of IS 302-2-80 :2017))	-	0	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017 and Cl.21.1 of IS 302-1:2008))	-	0	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017 and Cl.21.1 of IS 302-1:2008))	-	0	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017))	-	0	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	0	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	0	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	0	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	0	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	0	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	0	-
9(Construction (as per Cl.22.101 of IS 302-2-80 :2017))	-	0	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	0	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	0	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	0	-
9(Components (as per Cl.24.103 of IS 302-2-80 :2017))	-	0	-
9(Components (as per Cl.24.104 of IS 302-2-80 :2017))	-	0	-
9(Supply Connection and External Flexible cords (as per Cl.25 of IS 302-2-80 :2017))	-	0	-
9(Terminals for External conductors (as per Cl.26 of IS 302-2-80 :2017))	-	0	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	0	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	0	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	0	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	0	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	0	-
9(Screw and connections (as per Cl.28 of IS 302-2-80 :2017))	-	0	-
9(Clearances, creepage distances and solid insulation (as per Cl.29 of IS 302-2-80 :2017))	-	0	-
9(Clearances, creepage distances and solid insulation (as per Cl.29 of IS 302-2-80 :2017))	-	0	-
9(Resistance to fire (Glow wire Test) (as per Cl.30 of IS 302-2-80 :2017))	-	0	-
9(Resistance to rusting (as per Cl.31 of IS 302-2-80 :2017))	-	0	-
9(Radiation, Toxicity and similar Hazards (Cl.32 of IS 302-2-80 :2017))	-	0	-
10.1(Speed Regulators)	-	0	-
10.2(Speed Regulators)	-	0	-
10.2(Speed Regulators)	-	0	-
10.2(Speed Regulators)	-	0	-
10.3(Speed Regulators)	-	0	-
10.4(Speed Regulators)	-	0	-
10.5(Speed Regulators)	-	0	-
10.6(Speed Regulators)	-	0	-
10.7(Speed Regulators)	-	0	-
10.7(Speed Regulators)	-	0	-
10.8(Speed Regulators)	-	0	-
11.1(Starting)	-	0	-
11.2(Starting)	-	0	-
12(Interchangeability)	-	0	-
13(Silent Operation)	-	0	-
14.3 & Table 1(Test for Air Performance)	-	0	-
14.3 & Table 1(Test for Air Performance)	-	0	-
14.4(Measurement of Speed of the Fan )	-	0	-
14.4(Measurement of Speed of the Fan )	-	0	-
14.5(Measurement of Power factor and Power Input)	-	0	-
14.5(Measurement of Power factor and Power Input)	-	0	-
16(Endurance Test)	-	0	-
16(Endurance Test)	-	0	-
16(Endurance Test)	-	0	-
16(Endurance Test)	-	0	-
16(Endurance Test)	-	0	-
16(Endurance Test)	-	0	-
17(Test for Harmonic Distortion)	-	0	-
4(GENERAL REQUIREMENTS)	-	0	-
5(GENERAL NOTES ON TESTS)	-	0	-
15.1, 15.2(Air delivery and service value)	-	0	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	0	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	0	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	0	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	0	-
8.1(Marking (as per Cl. 7 of IS 302-2-80:2017))	-	0	-
8.1,a(Marking )	-	0	-
8.1,b(Marking )	-	0	-
8.1,c(Marking )	-	0	-
8.1,d(Marking )	-	0	-
8.1,e(Marking )	-	0	-
8.1,f(Marking )	-	0	-
8.1,g(Marking )	-	0	-
8.2(Marking )	-	0	-
8.3,a(Marking )	-	0	-
8.3,b(Marking )	-	0	-
8.3,c(Marking )	-	0	-
8.3,d(Marking )	-	0	-
8.3,e(Marking )	-	0	-
8.4(Marking )	-	0	-
8(Marking (as per Cl. 7.1 of IS 302-2-80:2017))	-	0	-
8(Marking (as per Cl. 7 of IS 302-2-80:2017, Cl.7.1 (f) of IS 302-1:2008))	-	0	-
8(Marking (as per Cl. 7 of IS 302-2-80:2017, Cl.7.1(g) of IS 302-1:2008))	-	0	-
8(Marking (as per Cl.7.12.1(a) of IS 302-2-80:2017))	-	0	-
6.2(Rating)	-	0	-
9(Protection against access to live parts (as per Cl.8 of IS 302-2-80 :2017))	-	0	-
9(Power Input & current (as per Cl.10 of IS 302-2-80 :2017))	-	0	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	0	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	0	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	0	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	0	-
9(Leakage current and Electric strength at operating temperature (as per Cl.13 of IS 302-2-80 :2017))	-	0	-
9(Leakage current and Electric strength at operating temperature (as per Cl.13 of IS 302-2-80 :2017))	-	0	-
9(Transient over Voltage (as per Cl.14 of IS 302-2-80 :2017))	-	0	-
9(Moisture Resistance (After Humidity test) (as per Cl.15 & Cl.16 of IS 302-2-80 :2017) )	-	0	-
9(Moisture Resistance (After Humidity test) (as per Cl.15 & Cl.16 of IS 302-2-80 :2017) )	-	0	-
9(Overload protection of transformers and associated circuits (as per Cl.17 of IS 302-2-80 :2017))	-	0	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	0	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	0	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	0	-
9(Staibilty and mechanical hazards (as per Cl.20.102, Table 101 of IS 302-2-80 :2017))	-	0	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017 and Cl.21.1 of IS 302-2:2008))	-	0	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017 and Cl.21.1 of IS 302-2:2008))	-	0	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017))	-	0	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	0	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	0	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	0	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	0	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	0	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	0	-
9(Construction (as per Cl.22.101 of IS 302-2-80 :2017))	-	0	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	0	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	0	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	0	-
9(Components (as per Cl.24.103 of IS 302-2-80 :2017))	-	0	-
9(Components (as per Cl.24.104 of IS 302-2-80 :2017))	-	0	-
9(Supply Connection and External Flexible cords (as per Cl.25 of IS 302-2-80 :2017))	-	0	-
9(Terminals for External conductors (as per Cl.26 of IS 302-2-80 :2017))	-	0	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	0	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	0	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	0	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	0	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	0	-
9(Screw and connections (as per Cl.28 of IS 302-2-80 :2017))	-	0	-
9(Clearances, creepage distances and solid insulation (as per Cl.29 of IS 302-2-80 :2017))	-	0	-
9(Clearances, creepage distances and solid insulation (as per Cl.29 of IS 302-2-80 :2017))	-	0	-
9(Resistance to fire (Glow wire Test) (as per Cl.30 of IS 302-2-80 :2017))	-	0	-
9(Resistance to rusting (as per Cl.31 of IS 302-2-80 :2017))	-	0	-
9(Radiation, Toxicity and similar Hazards (Cl.32 of IS 302-2-80 :2017))	-	0	-
10.1(Speed Regulators)	-	0	-
10.2(Speed Regulators)	-	0	-
10.2(Speed Regulators)	-	0	-
10.2(Speed Regulators)	-	0	-
10.3(Speed Regulators)	-	0	-
10.4(Speed Regulators)	-	0	-
10.5(Speed Regulators)	-	0	-
10.6(Speed Regulators)	-	0	-
10.7(Speed Regulators)	-	0	-
10.7(Speed Regulators)	-	0	-
10.8(Speed Regulators)	-	0	-
11.1(Starting)	-	0	-
11.2(Starting)	-	0	-
12(Interchangeability)	-	0	-
13(Silent Operation)	-	0	-
14.3 & Table 1(Test for Air Performance)	-	0	-
14.3 & Table 1(Test for Air Performance)	-	0	-
14.4(Measurement of Speed of the Fan )	-	0	-
14.4(Measurement of Speed of the Fan )	-	0	-
14.5(Measurement of Power factor and Power Input)	-	0	-
14.5(Measurement of Power factor and Power Input)	-	0	-
16(Endurance Test)	-	0	-
16(Endurance Test)	-	0	-
16(Endurance Test)	-	0	-
16(Endurance Test)	-	0	-
16(Endurance Test)	-	0	-
16(Endurance Test)	-	0	-
17(Test for Harmonic Distortion)	-	0	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	0	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	0	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	0	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	0	-
8.1(Marking (as per Cl. 7 of IS 302-2-80:2017))	-	0	-
8.1,a(Marking )	-	0	-
8.1,b(Marking )	-	0	-
8.1,c(Marking )	-	0	-
8.1,d(Marking )	-	0	-
8.1,e(Marking )	-	0	-
8.1,f(Marking )	-	0	-
8.1,g(Marking )	-	0	-
8.2(Marking )	-	0	-
8.3(Marking )	-	0	-
8.3,a(Marking )	-	0	-
8.3,b(Marking )	-	0	-
8.3,c(Marking )	-	0	-
8.3,d(Marking )	-	0	-
8.3,e(Marking )	-	0	-
8.4(Marking )	-	0	-
8(Marking (as per Cl. 7.1 of IS 302-2-80:2017))	-	0	-
8(Marking (as per Cl. 7 of IS 302-2-80:2017, Cl.7.1 (f) of IS 302-1:2008))	-	0	-
8(Marking (as per Cl. 7 of IS 302-2-80:2017, Cl.7.1(g) of IS 302-1:2008))	-	0	-
8(Marking (as per Cl.7.12.1(a) of IS 302-2-80:2017))	-	0	-
6.2(Rating)	-	0	-
9(Protection against access to live parts (as per Cl.8 of IS 302-2-80 :2017))	-	0	-
9(Power Input & current (as per Cl.10 of IS 302-2-80 :2017))	-	0	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	0	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	0	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	0	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	0	-
9(Leakage current and Electric strength at operating temperature (as per Cl.13 of IS 302-2-80 :2017))	-	0	-
9(Leakage current and Electric strength at operating temperature (as per Cl.13 of IS 302-2-80 :2017))	-	0	-
9(Transient over Voltage (as per Cl.14 of IS 302-2-80 :2017))	-	0	-
9(Moisture Resistance (After Humidity test) (as per Cl.15 & Cl.16 of IS 302-2-80 :2017) )	-	0	-
9(Moisture Resistance (After Humidity test) (as per Cl.15 & Cl.16 of IS 302-2-80 :2017) )	-	0	-
9(Overload protection of transformers and associated circuits (as per Cl.17 of IS 302-2-80 :2017))	-	0	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	0	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	0	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	0	-
9(Staibilty and mechanical hazards (as per Cl.20.102, Table 101 of IS 302-2-80 :2017))	-	0	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017 and Cl.21.1 of IS 302-1:2008))	-	0	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017 and Cl.21.1 of IS 302-1:2008))	-	0	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017))	-	0	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	0	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	0	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	0	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	0	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	0	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	0	-
9(Construction (as per Cl.22.101 of IS 302-2-80 :2017))	-	0	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	0	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	0	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	0	-
9(Components (as per Cl.24.103 of IS 302-2-80 :2017))	-	0	-
9(Components (as per Cl.24.104 of IS 302-2-80 :2017))	-	0	-
9(Supply Connection and External Flexible cords (as per Cl.25 of IS 302-2-80 :2017))	-	0	-
9(Terminals for External conductors (as per Cl.26 of IS 302-2-80 :2017))	-	0	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	0	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	0	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	0	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	0	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	0	-
9(Screw and connections (as per Cl.28 of IS 302-2-80 :2017))	-	0	-
9(Clearances, creepage distances and solid insulation (as per Cl.29 of IS 302-2-80 :2017))	-	0	-
9(Clearances, creepage distances and solid insulation (as per Cl.29 of IS 302-2-80 :2017))	-	0	-
9(Resistance to fire (Glow wire Test) (as per Cl.30 of IS 302-2-80 :2017))	-	0	-
9(Resistance to rusting (as per Cl.31 of IS 302-2-80 :2017))	-	0	-
9(Radiation, Toxicity and similar Hazards (Cl.32 of IS 302-2-80 :2017))	-	0	-
10.1(Speed Regulators)	-	0	-
10.2(Speed Regulators)	-	0	-
10.2(Speed Regulators)	-	0	-
10.2(Speed Regulators)	-	0	-
10.3(Speed Regulators)	-	0	-
10.4(Speed Regulators)	-	0	-
10.5(Speed Regulators)	-	0	-
10.6(Speed Regulators)	-	0	-
10.7(Speed Regulators)	-	0	-
10.7(Speed Regulators)	-	0	-
10.8(Speed Regulators)	-	0	-
11.1(Starting)	-	0	-
11.2(Starting)	-	0	-
12(Interchangeability)	-	0	-
13(Silent Operation)	-	0	-
14.3 & Table 1(Test for Air Performance)	-	0	-
14.3 & Table 1(Test for Air Performance)	-	0	-
14.4(Measurement of Speed of the Fan )	-	0	-
14.4(Measurement of Speed of the Fan )	-	0	-
14.5(Measurement of Power factor and Power Input)	-	0	-
14.5(Measurement of Power factor and Power Input)	-	0	-
16(Endurance Test)	-	0	-
16(Endurance Test)	-	0	-
16(Endurance Test)	-	0	-
16(Endurance Test)	-	0	-
16(Endurance Test)	-	0	-
16(Endurance Test)	-	0	-
17(Test for Harmonic Distortion)	-	0	-
4(GENERAL REQUIREMENTS)	-	0	-
5(GENERAL NOTES ON TESTS)	-	0	-
15.1, 15.2(Air delivery and service value)	-	0	-

08 Feb, 2027

-
Included w.e.f. 08.05.2024 Exclusion: Cl-9 (Cl-19.11.4.1 of IS 302-1) (Electrostatic discharge), Cl-9 (Cl-19.11.4.2 of IS 302-1) (Radiated Fields), Cl-9 (Cl-19.11.4.3 of IS 302-1) (Fast transient bursts), Cl-9 (Cl-19.11.4.4 of IS 302-1) (Surge Immunity test), Cl-9 (Cl-19.11.4.5 of IS 302-1) (Immunity to conducted discharge), Cl-9 (Cl-19.11.4.6 of IS 302-1) (Voltage dips and interruptions), Cl-9 (Cl-19.11.4.7 of IS 302-1) (Harmonics), Cl-9 (Cl-19.101 of IS 302-1) (Abnormal Operation)

142

IS 17681 (2022)

Specification for Bottled water dispensers

all

235000 View breakup
Included w.e.f. 22.03.2024

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Construction)	-	418800	-
4.1(General Design)	-	418800	-
4.2(Materials)	-	418800	-
4.3(Finish)	-	418800	-
4.4(Thermal Insulation)	-	418800	-
4.5(Hardware)	-	418800	-
4.6(Disposal of Waste Water)	-	418800	-
4.7(Hot Water Tank)	-	418800	-
4.8(Hermetically Sealed Compressor)	-	418800	-
4.9(Protective Guards)	-	418800	-
5(Refrigeration System)	-	418800	-
5.1(Pipes and Connections/Fitting)	-	418800	-
5.2(Control of Operation)	-	418800	-
6.1(General)	-	418800	-
6.1(Protection against electric shock (Cl. 8 of IS 302-2-24))	-	418800	-
6.1(Power Input & Current (Cl. 10 of IS 302-2-24))	-	418800	-
6.1(Temperature Rise/ Heating (Cl. 11 of IS 302-2-24))	-	418800	-
6.1("Insulation Resistance and Electric Strength/ Leakage Current and Electric Strength (Cl. 13 of IS 302-2-24)")	-	418800	-
6.1("Moisture Resistance (Cl. 15 of IS 302-2-24)")	-	418800	-
6.1("Insulation resistance and electric strength (After humidity treatment) (Cl. 16 of IS 302-2-24)")	-	418800	-
6.1("Provision For Earthing (Cl. 27 of IS 302-2-24)")	-	418800	-
6.1("Screws & Connections (Cl. 28 of IS 302-2-24)")	-	418800	-
6.2(Electrical Accessories)	-	418800	-
6.3(Salt Mist Test)	-	418800	-
7(Sound pressure level)	-	418800	-
10.1(Cooling Capacity Test)	-	418800	-
10.2(Maximum Operating Condition Test (Environmental))	-	418800	-
10.3(Maximum Operating Condition Test (Voltage))	-	418800	-
10.4(Heating Capacity Test)	-	418800	-
10.5(Annual Energy Consumption Test)	-	418800	-
10.6(Freeze-up Test)	-	418800	-
10.7(Door Opening and Closing Test)	-	418800	-
10.8(Door Seal Test)	-	418800	-
10.9(Pull-down Test)	-	418800	-
11(Marking and instruction)	-	418800	-

08 Feb, 2027

-
-

143

IS 1475 : Part 1 (2001)

Self - Contained drinking water coolers - Specification: Part 1 energy consumption and performance (Third Revision)

24750 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.2(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.3(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.4(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.5(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.6(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.7(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.8(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.9(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.1(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.11(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.12(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.13(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.14(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.15(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.16(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.17(COMPONENTS AND THEIR MATERIALS)	-	24750	-
7.7.1(Insulation Resistance)	-	24750	-
7.7.2(High Voltage Test)	-	24750	-
7.7.3(Cooling capacity rating test)	-	24750	-
7.7.4(Maximum operating conditions)	-	24750	-
7.8.2(Performance test)	-	24750	-
6.1(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.2(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.3(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.4(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.5(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.6(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.7(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.8(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.9(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.1(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.11(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.12(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.13(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.14(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.15(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.16(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.17(COMPONENTS AND THEIR MATERIALS)	-	24750	-
7.7.1(Insulation Resistance)	-	24750	-
7.7.2(High Voltage Test)	-	24750	-
7.7.3(Cooling capacity rating test)	-	24750	-
7.7.4(Maximum operating conditions)	-	24750	-
7.8.2(Performance test)	-	24750	-
6.1(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.2(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.3(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.4(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.5(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.6(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.7(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.8(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.9(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.1(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.11(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.12(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.13(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.14(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.15(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.16(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.17(COMPONENTS AND THEIR MATERIALS)	-	24750	-
7.7.1(Insulation Resistance)	-	24750	-
7.7.2(High Voltage Test)	-	24750	-
7.7.3(Cooling capacity rating test)	-	24750	-
7.7.4(Maximum operating conditions)	-	24750	-
7.8.2(Performance test)	-	24750	-
6.1(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.2(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.3(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.4(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.5(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.6(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.7(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.8(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.9(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.1(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.11(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.12(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.13(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.14(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.15(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.16(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.17(COMPONENTS AND THEIR MATERIALS)	-	24750	-
7.7.1(Insulation Resistance)	-	24750	-
7.7.2(High Voltage Test)	-	24750	-
7.7.3(Cooling capacity rating test)	-	24750	-
7.7.4(Maximum operating conditions)	-	24750	-
7.8.2(Performance test)	-	24750	-
6.1(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.2(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.3(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.4(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.5(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.6(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.7(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.8(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.9(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.1(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.11(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.12(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.13(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.14(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.15(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.16(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.17(COMPONENTS AND THEIR MATERIALS)	-	24750	-
7.7.1(Insulation Resistance)	-	24750	-
7.7.2(High Voltage Test)	-	24750	-
7.7.3(Cooling capacity rating test)	-	24750	-
7.7.4(Maximum operating conditions)	-	24750	-
7.8.2(Performance test)	-	24750	-
6.1(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.2(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.3(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.4(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.5(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.6(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.7(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.8(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.9(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.1(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.11(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.12(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.13(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.14(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.15(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.16(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.17(COMPONENTS AND THEIR MATERIALS)	-	24750	-
7.7.1(Insulation Resistance)	-	24750	-
7.7.2(High Voltage Test)	-	24750	-
7.7.3(Cooling capacity rating test)	-	24750	-
7.7.4(Maximum operating conditions)	-	24750	-
7.8.2(Performance test)	-	24750	-
7.7.5(Identification Data)	-	24750	-
5(Performance requirements)	-	24750	-
7.8.2(performance test)	-	24750	-
6.1(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.2(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.3(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.4(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.5(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.6(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.7(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.8(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.9(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.1(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.11(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.12(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.13(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.14(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.15(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.16(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.17(COMPONENTS AND THEIR MATERIALS)	-	24750	-
7.7.1(Insulation Resistance)	-	24750	-
7.7.2(High Voltage Test)	-	24750	-
7.7.3(Cooling capacity rating test)	-	24750	-
7.7.4(Maximum operating conditions)	-	24750	-
7.8.2(Performance test)	-	24750	-
6.1(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.2(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.3(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.4(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.5(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.6(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.7(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.8(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.9(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.1(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.11(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.12(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.13(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.14(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.15(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.16(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.17(COMPONENTS AND THEIR MATERIALS)	-	24750	-
7.7.1(Insulation Resistance)	-	24750	-
7.7.2(High Voltage Test)	-	24750	-
7.7.3(Cooling capacity rating test)	-	24750	-
7.7.4(Maximum operating conditions)	-	24750	-
7.8.2(Performance test)	-	24750	-
7.7.5(Identification Data)	-	24750	-
5(Performance requirements)	-	24750	-
7.8.2(performance test)	-	24750	-
6.1(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.2(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.3(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.4(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.5(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.6(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.7(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.8(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.9(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.1(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.11(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.12(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.13(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.14(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.15(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.16(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.17(COMPONENTS AND THEIR MATERIALS)	-	24750	-
7.7.1(Insulation Resistance)	-	24750	-
7.7.2(High Voltage Test)	-	24750	-
7.7.3(Cooling capacity rating test)	-	24750	-
7.7.4(Maximum operating conditions)	-	24750	-
7.8.2(Performance test)	-	24750	-
6.1(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.2(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.3(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.4(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.5(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.6(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.7(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.8(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.9(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.1(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.11(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.12(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.13(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.14(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.15(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.16(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.17(COMPONENTS AND THEIR MATERIALS)	-	24750	-
7.7.1(Insulation Resistance)	-	24750	-
7.7.2(High Voltage Test)	-	24750	-
7.7.3(Cooling capacity rating test)	-	24750	-
7.7.4(Maximum operating conditions)	-	24750	-
7.8.2(Performance test)	-	24750	-
7.7.5(Identification Data)	-	24750	-
5(Performance requirements)	-	24750	-
7.8.2(performance test)	-	24750	-

08 Feb, 2027

-
Included w.e.f 24.07.2024

144

IS 7872 (2020)

Deep Freezers - Specification ( Second Revision )

235000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
10.2.12(Temperature rise test)	-	429000	-
10.2.11(Measurement )	-	429000	-
10.2.10.1(Test packages and life time)	-	429000	-
10.2.10(Full load test)	-	429000	-
10.2.8(Earth resistance test )	-	429000	-
10.2.7(Leakage current test )	-	429000	-
10.2.6(Insulation resistance test)	-	429000	-
10.2.5(High voltage test)	-	429000	-
10.2.3(Thermal insulation test )	-	429000	-
10.2.2(Machanical strength of shelves and similar components)	-	429000	-
10.2.1(Door seal test )	-	429000	-
9.2.2(Power consumption & percentage running time)	-	429000	-
9.2.1(Pull down time)	-	429000	-
9.1(No load test)	-	429000	-
6.11(Volume measurement Water fill method)	-	429000	-
6(Measurement of freezer storage capacity)	-	429000	-
5.1(Sound level)	-	429000	-
5.6(External surface condensation test)	-	429000	-
5.5(Strength Pressure test for components)	-	429000	-
4.8(Doors & Fittings)	-	429000	-
13(Marking and Instruction)	-	429000	-
11.7(Pressure Test)	-	429000	-
11.6(Thermal Insulation Test ( External Condensation))	-	429000	-
11.5(Mechanical Strength of Shelves and Similar Components)	-	429000	-
11.4(Door Seal Test)	-	429000	-
11.3(Temperature Rise Test)	-	429000	-
11.2(Energy Consumption Test)	-	429000	-
11.1(No load Pull down Test)	-	429000	-
8(Freezer Storage Capacity)	-	429000	-
7(Sound Pressure Level)	-	429000	-
6(Safety Requirements)	-	429000	-
5.4.4(Fatigue Test)	-	429000	-
5.4.3(Individual Strength - Pressure Test)	-	429000	-
5.4.2(Individual Strength - Pressure Test)	-	429000	-
4.8(Door and Fittings)	-	429000	-
13(Marking and Instruction)	-	429000	-
11.7(Pressure Test)	-	429000	-
11.6(Thermal Insulation Test ( External Condensation))	-	429000	-
11.5(Mechanical Strength of Shelves and Similar Components)	-	429000	-
11.4(Door Seal Test)	-	429000	-
11.3(Temperature Rise Test)	-	429000	-
11.2(Energy Consumption Test)	-	429000	-
11.1(No load Pull down Test)	-	429000	-
8(Freezer Storage Capacity)	-	429000	-
6(Safety Requirements)	-	429000	-
5.4.4(Fatigue Test)	-	429000	-
5.4.3(Individual Strength - Pressure Test)	-	429000	-
5.4.2(Individual Strength - Pressure Test)	-	429000	-
4.8(Door and Fittings)	-	429000	-
5(Refrigeration system)	-	429000	-
7(Sound Pressure Level)	-	429000	-

08 Feb, 2027

-
-

145

IS 4246 (2002)

Domestic gas stoves for use with liquefied petroleum gases - Specification (Fifth Revision)

17500 View breakup
Single Burner SS Body – Rs. 8,000/- Glass Top – Rs. 10,500/- Double Burner SS Body – Rs. 11,500/- Glass Top – Rs. 12,500/- Three Burner SS Body – Rs. 13,000/- Glass Top – Rs. 14,000/- Four Burner SS Body – Rs. 14,500/- Glass Top - Rs. 16,000/- Five Burner SS Body – Rs. 16,000/- Glass Top – Rs. 17,500/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.24(Annexure E)(on no account the carbon monoxidel carbon dioxide ratio of the exhaust gases of any burner. operating at any consumption at which the burner is stable at gas inlet pressure from 2452 kN/m2 to 3432 kN/m2 (25 gf/cm2 to 35 gf/cm2), exceed 0.02.)	-	28000	-
Cl.23(There shall be no extinction of the flames on any of the burners operating at maximum consumption when the appliance is placed in a general (not localized) current of air with a velocity of 2 m/s, as measured with a rotating vane anemometer. The location of the appliance relative to neighboring walls and the direction of the draught shall be varied to correspond to likely conditions of appliance installation. This applies for all pressures from 2452 kN/m2 to 3432 kN/m2 (25 gf/cm2 to 35 gf/cm2).)	-	28000	-
24 (Annex - E)(Combustion (CO and CO2 ratio))	-	28000	-
4.1(Requirement)	-	28000	-
5(Materials)	-	28000	-
6(Design for Maintenance)	-	28000	-
7(Rigidity and Stability)	-	28000	-
8(Workmanship and Finish)	-	28000	-
9(Gas Taps)	-	28000	-
10(Injector Jets)	-	28000	-
11(Burners)	-	28000	-
12(Burner Pan Supports)	-	28000	-
13.1(Gas Soundness)	-	28000	-
13.2(Gas Leak Detector)	-	28000	-
14(Gas Inlet Connections)	-	28000	-
15(Strength and Rigidity)	-	28000	-
16(General Conditions of Test)	-	28000	-
17.1.1(Gas Consumption)	-	28000	-
18(Ignition and Flame Travel)	-	28000	-
19(Flame Stability)	-	28000	-
20(Noise Control)	-	28000	-
21(Flash Back)	-	28000	-
22(Formation of Soot)	-	28000	-
23(Resistance to Draught)	-	28000	-
24(Combustion)	-	28000	-
25(Fire Hazard and Limiting Temperature)	-	28000	-
26(Thermal Efficiency)	-	28000	-
27.1(Type Tests)	-	28000	-
27.2(Routine Tests)	-	28000	-
29(Marking)	-	28000	-
30(Packing)	-	28000	-

08 Feb, 2027

-
-

146

IS 17153 (2019)

Domestic gas stoves for use with piped natural gas (PNG) - Specification

42500 View breakup
Single Burner SS Body – Rs. 22,000/- Glass Top – Rs. 24,500/- Double Burner SS Body – Rs. 27,000/- Glass Top – Rs. 29,000/- Three Burner SS Body – Rs. 32,000/- Glass Top – Rs. 34,000/- Four Burner SS Body – Rs. 37,000/- Glass Top - Rs. 39,000/- Five Burner SS Body – Rs. 41,000/- Glass Top – Rs. 43,000/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
26(Burner-5)	-	42500	-
26(Burner-4)	-	42500	-
26(Burner-3)	-	42500	-
26(Burner-2)	-	42500	-
26(Burner-1)	-	42500	-
25.2(With the Burner lighted on full on, the flame temperature at a height of H+20 mm)	-	42500	-
25.1(Temperature of synthetic rubber diaphragm in gas carrying components)	-	42500	-
25.1(Temperature of the surface in normal use)	-	42500	-
25.1(Temperature of the portion of the surface other than the working surface likely to be touched accidentally.)	-	42500	-
25.1(Rise of Temperature above room temperature in (Wall, Floor, Ceiling), after two hours of operation)	-	42500	-
24(Burner-5)	-	42500	-
24(Burner-4)	-	42500	-
24(Burner-3)	-	42500	-
24(Burner-2)	-	42500	-
24(Burner-1)	-	42500	-
23(When operated at pressure 20-25 gf/cm2 , there shall be no extinction of flame on any of the burneroperating at the max of the burner, when the appliance is placed in normal current of air with velocity of 2 m/s.)	-	42500	-
22(When operated at pressure 20-25 gf/cm2 , for one at full on position, no soot shall be deposited on burner or on the bottom of the vessel.)	-	42500	-
21(When operated at pressure 20-25 gf/cm2 for half an hour flame shall be reduced to simmer and then brought back to full on, operation shall be repeated five times, no flash back shall occur during the test.)	-	42500	-
20(Ignition of Burner flame, their operation and turning off shall not give rise to undue excessive noise during the operation.)	-	42500	-
19.3(Fixed Min Pilot flame shall be sufficient to relight the main burner at the 21 mbar gas inlet pressure.)	-	42500	-
19.2(Pilot Flame shall be Stable without lifting or soot deposition at gas inlet pressure from 20-25 gf/cm2)	-	42500	-
19.1.1(When the gas consumption of the burner is reduced to simmer after operating half an hour on full ON flame shall not extinguish, blow off, strike back or form soot at 21 mbar gas inlet pressure.)	-	42500	-
19.1(It shall be possible to operate stove with taps fully open at gas inlet pressure , without the flame extinguishing, blowing off or striking back and without the formation of soot.)	-	42500	-
18.4.1(The flame failure device if provided shall confirm to IS:5116)	-	42500	-
18.3(When the burner is ignited from a pilot flame and/or by an electric/electronic method, the ignition and flame travel shall be smooth at pressure……..)	-	42500	-
18.2(if the flame is applied to any of the outer row of the burner ports when the gas is flowing , flame travel shall be complete……..)	-	42500	-
18.1(Where the burner or burners are lighted by automatic ignition (Battery of flint operated or by a pilot flame , it shall not be possible for gas to be admitted to the main burner without being smoothly ignited by the pilot flame. Each burner should be at room temperature at the begining of the test and should be tested in turn. )	-	42500	-
18.1(There shall be easy and safe access of lighting each burner by matchstick and it shall be easy to see that the burner is lighted)	-	42500	-
17.3(When the gas consumption of the burner is reduced to simmer, the flame shall not extinguish, blow off, strike back or form soot, when tested with commercial PNG at 21 mbar gas inlet pressure.)	-	42500	-
17.2(Burner-5)	-	42500	-
17.2(Burner-4)	-	42500	-
17.2(Burner-3)	-	42500	-
17.2(Burner-2)	-	42500	-
17.2(Burner-1)	-	42500	-
17.2(Sim Rating Declared)	-	42500	-
17.1.2(Total Gas Consumption)	-	42500	-
17.1(Burner-5)	-	42500	-
17.1(Burner-4)	-	42500	-
17.1( Burner-3)	-	42500	-
17.1( Burner-2)	-	42500	-
17.1( Burner-1)	-	42500	-
17.1(Rating Declared)	-	42500	-
15.2(Fragmentation test of the toughened glass to )	-	42500	-
15.1(Verification of the strength of the gas stove surface of the toughened glass top against thermal stress)	-	42500	-
15(Width wise deflection)	-	42500	-
15(Length wise deflection)	-	42500	-
15(Vertical Deflection)	-	42500	-
14.5(The position of the gas inlet shall allow connection to a gas supply on either side of the appliances, the rear end or bottom is also permitted. It shall be possible to change gas inlet from one side to other side easily by standard tools.)	-	42500	-
14.4(Any other connection made from the main gas rail shall be only metallic.)	-	42500	-
14.4(The external surface of the gas rail shall be treated to resist corrosion)	-	42500	-
14.4(The wall thickness of main gas rail)	-	42500	-
14.4(The pipe/tube used for main gas rail shall be of mild steel)	-	42500	-
14.3(Screwed gas Inlet and outlet connections shall confirm to IS:554, Declared by party)	-	42500	-
14.2((e))	-	42500	-
14.2((d))	-	42500	-
14.2(( c))	-	42500	-
14.2((b))	-	42500	-
14.2(Shape of Nozzles as per fig. 3 : (a))	-	42500	-
14.2(Where Nozzles for flexible tubing are fitted, they shall be so positioned as to facilitate fitting of the tubing and also to prevent heating of the tubing to more than 60°C)	-	42500	-
14.1(Nozzle shall be machined from free cutting brass, MS, SS, Zinc)	-	42500	-
13(All gas carrying parts of the appliances should be sound and these parts when connected to form complete assembly shall also be sound against any gas leakage. The complete assembly shall be checked at 14.71 kN/m²)	-	42500	-
12.1.2(The material of the pan support shall be metallic.)	-	42500	-
12.1.1(Loose Pan support shall be so designed that it is not possible to place them firmly in other than proper position)	-	42500	-
12.1(Prongs of the Support shall have suitable taper to accommodate round bottom pans.)	-	42500	-
12.1(The design of the pan supports shall be such that it is practicable to support a pan of 100 mm diameter over at least one top burner without the use of loose rings and such that 125 mm diameter vessel remains stable over each burner. )	-	42500	-
11.7(The appliance comprising two or more burners shall include one burner having a rating of at least 1450 kCal/hr, based on net calorific value of the gas (When using domestic PNG))	-	42500	-
11.6(For Burners having centre flame, provision shall be made to protect the centre flame from pan resting directly on burner top and smothering the centre flame. )	-	42500	-
11.5(If the burner is made and assembled in two or more parts they shall be so designed to provide proper self locating arrangement so that they are always reassembled to its original design preventing any maladjustment in their assembly. This shall also be applicable for primary air regulators.)	-	42500	-
11.4(If primary air regulators are used, they shall be so designed that they are not easily maladjusted by the user and the construction shall be such that primary air adjustment can be made with the burner in place.)	-	42500	-
11.3(The tightness of the joints in the burner assembly shall not be depended upon adhesives or any kind of packing.)	-	42500	-
11.2(The Burner supports shall be rigid and shall be fixed in their place. Their construction shall ensure the stability of the burners and shall prevent their undue movement in a horizontal plane.)	-	42500	-
11.1(The construction of the burners and the assembly shall allow their dismantling from the supports easily with or without the use of tools)	-	42500	-
10.2(The Size of the jet in Litres per hour of flow of PNG at STP conditions shall be impressed upon it.)	-	42500	-
10.1.1(Injector Jet shall be made of metal , with or without ceramic tip. The melting point of the metal shall not be less than 650°C)	-	42500	-
10.1(Dimension- Threads)	-	42500	-
10.1(Dimension- Projection from the face of mounting, Nominal)	-	42500	-
10.1(Dimension- Across Flats)	-	42500	-
10.1(The Injector Jets shall be fixed calibrated type and it shall not be possible to loosen them without the use of tools.)	-	42500	-
9.12(The noting means adopted shall be sufficiently robust to withstand normal use without distortion or damage.)	-	42500	-
9.11.1(Simmer flame shall be obtained by fixed simmer orifice.)	-	42500	-
9.11(Taps having an 'OFF' position shall have positive stops at the 'OFF' and simmer position except that special purpose taps (for appliance incorporating auto or self ignition device))	-	42500	-
9.1(Screw-down valves shall be so designed that it is impossible to withdraw completely the valve stem in the normal operation of the tap.)	-	42500	-
9.9(Screws nuts etc., which regulate the tension of taps valve or springs shall not loosen in operation of the appliance. It shall not be possible to cause a leak during normal manual operation of tap.)	-	42500	-
9.8(All controls or taps shall be easy to operate at all temperatures normally attained in use)	-	42500	-
9.7(C1)	-	42500	-
9.7(B1)	-	42500	-
9.7(A1)	-	42500	-
9.7(D)	-	42500	-
9.7(C)	-	42500	-
9.7(B)	-	42500	-
9.7(A)	-	42500	-
9.7(Dimension of Taper plugs in off position:)	-	42500	-
9.6(Each taper plug tap shall be spring loaded to maintain a gas tight fit. Helical springs fitted in taps and valves shall have flattened ends, which shall be rounded before fitting.)	-	42500	-
9.5.1(Taps shall be lubricated with suitable grease, resistant to the action of the gas and capable of operating at the maximum temperature of 110°C.)	-	42500	-
9.5(Taps shall be so made that in normal use and reasonable application of lubricant, the gas passages do not become blocked.)	-	42500	-
9.4(Preferably all taps (Excluding pilot taps) should lock in the off position, but in all cases it shall be impossible to handle or tap to move accidentally…. )	-	42500	-
9.3(When Taps are fitted with adjustable stops, there shall be means of looking the stops in position. If screws are used for this purpose, they shall not lead into gas passages.)	-	42500	-
9.2(Taps shall be designed so that when placed in any position and viewed from a distance of 3 m, will definitely indicate whether the valve is open, closed or in intermediate position.)	-	42500	-
9.2(All Taps shall close in the same direction. The direction of rotation of knob from off-on-simmer shall be anti-clockwise.)	-	42500	-
9.2(The 'ON' "OFF" and any fixed position of tap handles shall be clearly and durably indicated or shall be obvious by design or position else some indication shall be provided.)	-	42500	-
9.1(The Appliance shall have at least one tap for each burner)	-	42500	-
8.7(The external Finished surfaces shall be easily cleanable.)	-	42500	-
8.6(All springs, screws, nuts and bolts which are visible or to be removed for maintenance, shall be of corrosion-resistant material or treated to resist corrosion.)	-	42500	-
8.5(Concealed Gas Supplies: Concealed tubular fittings liable to corrode shall be protected by bituminous paint or other equally protective material.)	-	42500	-
8.4 (b)(Resistance to Heating)	-	42500	-
8.4 (a)(Resistance to Abrasion)	-	42500	-
8.3.3(Corrosion Resistance test)	-	42500	-
8.3.2(Adhesion Test)	-	42500	-
8.3.1(Thickness of Chromium coating)	-	42500	-
8.3(Thickness of Nickel coating of the top flat surface of the body of electroplated stove.)	-	42500	-
8.2(Vitreous enameled component shall meet the requirement when tested in accordance with Annex E of IS:5116)	-	42500	-
8.1(The finishes shall, on visual examination, show no defects, such as pin-holes, blisters, roughness or exposed area of metal, which give rise to undualy rapid deterioration in use.)	-	42500	-
8.1(Parts, which will come in contact with the foodstuff, shall be capable of being hygienically cleaned.)	-	42500	-
8.1(The Finish of exposed parts shall be durable, easy to clean and not subject to excessive deterioration in normal use.)	-	42500	-
7(Rigidity and Stability : The appliance shall be so designed that it remains stable and shall not be easily overturned.)	-	42500	-
6.7(Thickness of Sheet)	-	42500	-
6.6(All nuts, bolts and fittings having spanner flats shall be capable of being moved by suitable spanner or be readily accessible to an adjustable spanner.)	-	42500	-
6.5(Parts, which are intented to be removable by the user, shall be easy to replace correctly and difficult to assemble incorrectly.)	-	42500	-
6.4(Burners and parts of Burner only of same rating , model and make shall be interchangeable or replaceable without effecting performance.)	-	42500	-
6.3(Burner ports shall be so designed and located that in normal use spilage of food shall not cause internal fouling of mixing tube and or blockage of injector jet.)	-	42500	-
6.2(The relative distance between the centres of the adjoining burner-)	-	42500	-
6.2(the parts of the burner shall not become disconnected during operation of the appliance.)	-	42500	-
6.1(The appliance, including all the component parts, shall be easy to clean and maintain in good working order, there shall be easy access to the accessories and controls for maintenance and adjustment.)	-	42500	-
5.8.3(The number of glass fragments contained in a 50 mm side square, when tested as Cl. 15.2)	-	42500	-
5.8.3(Toughened glass shall fragment into small particles.)	-	42500	-
5.8.2(Pan support for an uncovered burner in contact with the glass ceramic surface.The surface area of the pan support in contact with the glass ceramic)	-	42500	-
5.8.2(The toughened glass top shall ensure durability against damage in normal use)	-	42500	-
5.8.2(The means to hold the glass top of the gas stove shall not allow any stress or risk of mechanical change to the glass top.)	-	42500	-
5.8.1(Toughened glass top including their edges or corners shall not have fissures or scratches)	-	42500	-
5.7(Drip tray if provided shall be made of non-corrosive material)	-	42500	-
5.6(Meltiing poin of metal used in oven, griller or auxilliary or anyother combination)	-	42500	-
5.6(Melting point of metal for burner top)	-	42500	-
5.5(The main body of the burner including mixer head, mixing tube and burner head shall be of substantial and durable construction)	-	42500	-
5.4(Change in weight or volume of a non metallic material, when immerse in n-Pentane or PNG for 72 hours)	-	42500	-
5.3(Mercurous Nitrate test for copper and copper alloy Parts)	-	42500	-
5.2(The burner parts shall not melt or distort when burner is operated with flames flashed back for half an hour in the mixing tube.)	-	42500	-
5.1.1(Plastic components which are liable to heating (For example, tap handles push buttons etc.) shall be free of fissures, distortion, blemishes and discolouration)	-	42500	-
5.1(The use of low pressure rubber or plastic tubing fitted or pushed on nozzle is not recommended.)	-	42500	-
5.1(If flexible tubing is used, it shall not be fitted on the outlet side of any control which is capable of cutting of the gas completely, except where screwed metal connection are fitted.)	-	42500	-
5.1(The appliance shall be free from swarf, grit and other foreign matters.)	-	42500	-
4.3(No pressure regulator shall be included as part of the stove.)	-	42500	-
4.2(Rivets, Fastening screws and plugs , etc. shall not lead into gas passages.)	-	42500	-
4.1(The construction of all the parts of equipment shall be sound and of high standard of workmanship and appropriate finish. The construction shall ensure durability and shall comply with the safety requirements.)	-	42500	-
4.1(General)	-	42500	-
4.2(General)	-	42500	-
4.3(General)	-	42500	-
5.1(Materials)	-	42500	-
5.1(Materials)	-	42500	-
5.1(Materials)	-	42500	-
5.1(Materials)	-	42500	-
5.1.1(Materials)	-	42500	-
5.2(Materials)	-	42500	-
5.3(Materials)	-	42500	-
5.4(Materials)	-	42500	-
5.5(Materials)	-	42500	-
5.5(Materials)	-	42500	-
5.5(Materials)	-	42500	-
5.7(Materials)	-	42500	-
5.8.1(Materials)	-	42500	-
26(Thermal Efficiency)	-	42500	-
5.8.2 (a)(Materials)	-	42500	-
5.8.2 (a)(Materials)	-	42500	-
5.8.2 (a)(Materials)	-	42500	-
26(Thermal Efficiency)	-	42500	-
5.8.2 (a)(Materials)	-	42500	-
5.8.2 (a)(Materials)	-	42500	-
26(Thermal Efficiency)	-	42500	-
5.8.2 (a)(Materials)	-	42500	-
26(Thermal Efficiency)	-	42500	-
5.8.2 (b)(Materials)	-	42500	-
26(Thermal Efficiency)	-	42500	-
5.8.2 (c )(Materials)	-	42500	-
25.2(Fire Hazard and Limiting Temperature)	-	42500	-
5.8.2 (d)(Materials)	-	42500	-
25.1(Fire Hazard and Limiting Temperature)	-	42500	-
5.8.2 (d)(Materials)	-	42500	-
25.1(Fire Hazard and Limiting Temperature)	-	42500	-
25.1(Fire Hazard and Limiting Temperature)	-	42500	-
5.8.2 (e)(Materials)	-	42500	-
25.1(Fire Hazard and Limiting Temperature)	-	42500	-
5.8.2 (e)(Materials)	-	42500	-
5.8.2 (e)(Materials)	-	42500	-
24.2(Combustion)	-	42500	-
5.8.2 (e)(Materials)	-	42500	-
24.1(Combustion)	-	42500	-
5.8.2 (e)(Materials)	-	42500	-
24.1(Combustion)	-	42500	-
5.8.3 (a)(Materials)	-	42500	-
23(Resistance to Draught)	-	42500	-
5.8.3 (b)(Materials)	-	42500	-
5.8.3 (c)(Materials)	-	42500	-
22(Formation of soot)	-	42500	-
21(Flash Back)	-	42500	-
5.8.3 (d)(Materials)	-	42500	-
20(Noise Control)	-	42500	-
5.8.3 (e)(Materials)	-	42500	-
5.8.3 (f)(Materials)	-	42500	-
19.3(Flame Stability)	-	42500	-
6.1(Design for Maintenance)	-	42500	-
19.2(Flame Stability)	-	42500	-
6.1(Design for Maintenance)	-	42500	-
19.1.1(Flame Stability)	-	42500	-
6.2(Design for Maintenance)	-	42500	-
6.2(Design for Maintenance)	-	42500	-
19.1(Flame Stability)	-	42500	-
6.3(Design for Maintenance)	-	42500	-
18.4(Ignition and Flame Travel)	-	42500	-
6.4(Design for Maintenance)	-	42500	-
18.3(Ignition and Flame Travel)	-	42500	-
6.5(Design for Maintenance)	-	42500	-
18.2(Ignition and Flame Travel)	-	42500	-
18.1(Ignition and Flame Travel)	-	42500	-
18.1(Ignition and Flame Travel)	-	42500	-
6.6(Design for Maintenance)	-	42500	-
17.0(Gas Consumption)	-	42500	-
6.7(Design for Maintenance)	-	42500	-
17.0(Gas Consumption)	-	42500	-
17.0(Gas Consumption)	-	42500	-
17.0(Gas Consumption)	-	42500	-
17.0(Gas Consumption)	-	42500	-
17.0(Gas Consumption)	-	42500	-
17.0(Gas Consumption)	-	42500	-
17.0(Gas Consumption)	-	42500	-
17.0(Gas Consumption)	-	42500	-
9.11(Gas Taps)	-	42500	-
7.1(Rigidity and Stability)	-	42500	-
7.2(Rigidity and Stability)	-	42500	-
8.1(Workmanship and Finish)	-	42500	-
8.1(Workmanship and Finish)	-	42500	-
8.2 & 8.2.1(Workmanship and Finish)	-	42500	-
8.3(Workmanship and Finish)	-	42500	-
8.3(Workmanship and Finish)	-	42500	-
8.3.2(Workmanship and Finish)	-	42500	-
8.4 (a)(Workmanship and Finish)	-	42500	-
8.4 (b)(Workmanship and Finish)	-	42500	-
8.5(Workmanship and Finish)	-	42500	-
8.6(Workmanship and Finish)	-	42500	-
8.7(Workmanship and Finish)	-	42500	-
9.1(Gas Taps)	-	42500	-
9.2(Gas Taps)	-	42500	-
9.2(Gas Taps)	-	42500	-
9.2(Gas Taps)	-	42500	-
9.3(Gas Taps)	-	42500	-
9.4(Gas Taps)	-	42500	-
9.5(Gas Taps)	-	42500	-
9.11.1(Gas Taps)	-	42500	-
9.12(Gas Taps)	-	42500	-
10.1(Injector Jets)	-	42500	-
10.1 (a)(Injector Jets)	-	42500	-
10.1 (b)(Injector Jets)	-	42500	-
10.1 (c )(Injector Jets)	-	42500	-
10.1.1(Injector Jets)	-	42500	-
9.5.1(Gas Taps)	-	42500	-
10.2(Injector Jets)	-	42500	-
9.6(Gas Taps)	-	42500	-
11.1(Burners)	-	42500	-
9.7(Gas Taps)	-	42500	-
11.2(Burners)	-	42500	-
9.7(Gas Taps)	-	42500	-
11.3(Burners)	-	42500	-
9.7(Gas Taps)	-	42500	-
11.4(Burners)	-	42500	-
9.7(Gas Taps)	-	42500	-
9.7(Gas Taps)	-	42500	-
11.5(Burners)	-	42500	-
9.7(Gas Taps)	-	42500	-
11.6(Burners)	-	42500	-
9.7(Gas Taps)	-	42500	-
11.7(Burners)	-	42500	-
9.7(Gas Taps)	-	42500	-
9.8(Gas Taps)	-	42500	-
9.9(Gas Taps)	-	42500	-
9.10(Gas Taps)	-	42500	-
12.1(Pan Supports)	-	42500	-
12.1.1(Pan Supports)	-	42500	-
12.1.2(Pan Supports)	-	42500	-
13.1(Gas Soundness)	-	42500	-
14.1(Gas Inlet Connection)	-	42500	-
14.2(Gas Inlet Connection)	-	42500	-
14.2(Gas Inlet Connection)	-	42500	-
14.2(Gas Inlet Connection)	-	42500	-
14.2(Gas Inlet Connection)	-	42500	-
14.2(Gas Inlet Connection)	-	42500	-
14.2(Gas Inlet Connection)	-	42500	-
14.2(Gas Inlet Connection)	-	42500	-
14.3(Gas Inlet Connection)	-	42500	-
14.4(Gas Inlet Connection)	-	42500	-
14.4(Gas Inlet Connection)	-	42500	-
14.4(Gas Inlet Connection)	-	42500	-
14.4(Gas Inlet Connection)	-	42500	-
14.5(Gas Inlet Connection)	-	42500	-
14.5(Gas Inlet Connection)	-	42500	-
14.5(Gas Inlet Connection)	-	42500	-
15.0(Strength and Rigidity)	-	42500	-
15.0(Strength and Rigidity)	-	42500	-
15.0(Strength and Rigidity)	-	42500	-
15.0(Strength and Rigidity)	-	42500	-
17.0(Gas Consumption)	-	42500	-
17.0(Gas Consumption)	-	42500	-
7.3(Rigidity and Stability)	-	42500	-

08 Feb, 2027

-
-

147

IS 17550 : PART 3 (2021)

Household Refrigerating Appliance- Characteristics and test methods Part 3 Energy Consumption and volume

145000 View breakup
For direct cool refrigerator - Rs. 1,45,000/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
"Cl. No. 6 "("DETERMINATION OF ENERGY CONSUMPTION")	-	145000	-
"Cl. No.4.8 & Annex H "(Determination Of Volume)	-	145000	-
"Cl. No. 6 "("DETERMINATION OF ENERGY CONSUMPTION")	-	145000	-
"Cl. No. 6 "("DETERMINATION OF ENERGY CONSUMPTION")	-	145000	-
"Cl. No.4.8 & Annex H "(Determination Of Volume)	-	145000	-
4.2(Steady State Power Consumption)	-	145000	-
4.3(Defrost and Recovery Energy and temperature change)	-	145000	-
4.4(Defrost Frequency)	-	145000	-
4.5(Number of Test Points and Interpolations)	-	145000	-
4.6(Load Processing Efficiency)	-	145000	-
4.7(Specified Auxiliaries)	-	145000	-
4.8(Volumn Determination)	-	145000	-
6(Determination of Energy Consumption)	-	145000	-
Annex B(Determination of Steady state Power & Temperature)	-	145000	-
Annex C(Defrost and Recovery Energy and temperature change)	-	145000	-
Annex D(Defrost Interval)	-	145000	-
Annex E(Interpolation of Results)	-	145000	-
Annex F(Energy Consumption of specified auxiliaries)	-	145000	-
Annex G(Determination of Load Processing Efficiency)	-	145000	-
Annex H(Determination of Volume)	-	145000	-

08 Feb, 2027

-
-

148

IS 17550 : PART 2 (2021)

Household Refrigerating Appliance- Characteristics and test methods Part 2 Performance requirements

369000 View breakup
For direct cool refrigerator - Rs. 1,55,000/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. No. 6(Storage Test)	-	369000	-
Cl. No. 7(Cooling Capacity Test)	-	369000	-
Cl. No. 8(Freezing Capacity Test)	-	369000	-
Cl. No. 9("Automatic Ice-Making Capacity Test")	-	369000	-
"Cl. No.4.6 & Annex A"(PULL-DOWN TEST)	-	369000	-
Cl. No.4.6(b) & Annex B("Wine Storage Appliances And Compartments; Storage Test")	-	369000	-
Cl. No.4.6(C) & AnnexC("Temperature Rise Test ")	-	369000	-
Cl. No.4.6(d) & Annex D("Water Vapour Condensation Test ")	-	369000	-
Cl. No.4.6(d) & Annex D("Water Vapour Condensation Test ")	-	369000	-
Cl. No. 6(Storage Test)	-	369000	-
Cl. No. 8(Freezing Capacity Test)	-	369000	-
Cl. No. 9("Automatic Ice-Making Capacity Test")	-	369000	-
"Cl. No.4.6 & Annex A"(PULL-DOWN TEST)	-	369000	-
Cl. No.4.6(b) & Annex B("Wine Storage Appliances And Compartments; Storage Test")	-	369000	-
Cl. No.4.6(C) & AnnexC("Temperature Rise Test ")	-	369000	-
Cl. No.4.6(d) & Annex D("Water Vapour Condensation Test ")	-	369000	-
4.2(Storage test)	-	369000	-
4.3(Cooling capacity test)	-	369000	-
4.5(Automatic ice-making capacity test)	-	369000	-
4.6(Other Tests)	-	369000	-
6(Storage test)	-	369000	-
7(Cooling capacity test)	-	369000	-
8(Freezing capacity test)	-	369000	-
9(Automatic ice-making capacity test)	-	369000	-
Annex A(Pull Down test)	-	369000	-
Annex B(Storage test of wine storage appliances and compartments)	-	369000	-
Annex C(Temperature Rise Test)	-	369000	-
Annex D(Water Vapour Condensation Test)	-	369000	-
4.4(Freezing Capacity Test)	-	369000	-
5(General Test Conditions)	-	369000	-

08 Feb, 2027

-
-

149

IS 17550 : PART 1 (2021)

HOUSEHOLD REFRIGERATING APPLIANCES CHARACTERISTICS AND TEST METHODS Part 1 General Requirements

260000 View breakup
For direct cool refrigerator - Rs. 2,55,000/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
"Cl. No. 9 "(Testing The Air Tightness Of Door Or Lid Seal(S))	-	260000	-
"Cl. No.10 "(Testing The Opening Force Of Door(S) Or Lid(S))	-	260000	-
"Cl. No.11 "(Testing The Durability Of Hinges And Handles Of Door(S) And Lid(S))	-	260000	-
"Cl. No.12 "(Testing The Mechanical Strength Of Shelves And Similar Components)	-	260000	-
"Cl. No.14 "(Ice-Making Test (If Applicable))	-	260000	-
"Cl. No.15 "(Test For Absence Of Odour And Taste)	-	260000	-
"Cl. No.16 "(Safety Requirements)	-	260000	-
"Cl. No. 9 "(Testing The Air Tightness Of Door Or Lid Seal(S))	-	260000	-
"Cl. No.10 "(Testing The Opening Force Of Door(S) Or Lid(S))	-	260000	-
"Cl. No.11 "(Testing The Durability Of Hinges And Handles Of Door(S) And Lid(S))	-	260000	-
"Cl. No.12 "(Testing The Mechanical Strength Of Shelves And Similar Components)	-	260000	-
"Cl. No.14 "(Ice-Making Test (If Applicable))	-	260000	-
"Cl. No.15 "(Test For Absence Of Odour And Taste)	-	260000	-
"Cl. No.16(a) "(Protection against acess to live parts)	-	260000	-
"Cl. No.16(b) "(Power input and current)	-	260000	-
"Cl. No.16(c) "(Heating)	-	260000	-
"Cl. No.16(d) "(Leakage current and electric strength at operating temperature)	-	260000	-
"Cl. No.16(e) "(Moisture resistance)	-	260000	-
"Cl. No.16(f) "(Leakage current and electric strength)	-	260000	-
"Cl. No.20.3(a) "("Production Routine Test a)Leakage current test ")	-	260000	-
"Cl. No.20.3(b) "(b) Earth continuity tesT)	-	260000	-
"Cl. No.20.3(c) "(c) Electric strength)	-	260000	-
"Cl. No.8.11 "(Thermostat function test)	-	260000	-
"Cl. No.5 "(Markings)	-	260000	-
4(Classification)	-	260000	-
5(Marking)	-	260000	-
6.2(Determination of Linear Dimensions)	-	260000	-
7(Instructions)	-	260000	-
8.2(Material and Finishes)	-	260000	-
8.3(Thermal Insulation and Air Tightness)	-	260000	-
8.4(Doors, Lids and Fittings)	-	260000	-
8.5(Shelves and Containers)	-	260000	-
8.6(Disposal of Defrost Water)	-	260000	-
8.7(Refrigerating System)	-	260000	-
8.8(Supply Cord)	-	260000	-
8.9(Compressor)	-	260000	-
8.10(Temperature Sensing Controls (Thermostat))	-	260000	-
8.11(Temperature Sensing Controls (Thermostat) Setting)	-	260000	-
9(Testing the Air tightness of door or lid seal(s) before water vapour condensation test)	-	260000	-
9(Testing the Air tightness of door or lid seal(s) after water vapour condensation test)	-	260000	-
10(Testing the Opening force of door(s) or lid(s))	-	260000	-
11(Testing the Durability of hinges and handles of door(s) and lid(s))	-	260000	-
12(Testing the Mechanical strength of shelves and similar components)	-	260000	-
13(Water-vapour condensation test)	-	260000	-
14(Ice-making test (if applicable))	-	260000	-
15(Test for absence of odour and taste)	-	260000	-
16(a)(Protection against access to live parts)	-	260000	-
16(b)(Power input and current)	-	260000	-
16 (c(Heating)	-	260000	-
16(d)(Leakage current and electric strength at operating temperature)	-	260000	-
16(e)(Moisture resistance)	-	260000	-
16(f)(Leakage current and electric strength (high voltage after humidity))	-	260000	-
17(Packing)	-	260000	-
18(Designation)	-	260000	-
19(Instructions for Use and Maintenance)	-	260000	-
20.3 (a)(Leakage Current Test)	-	260000	-
20.3 (b)(Earth Continuity Test)	-	260000	-
20.3 (c(Electric Strength Test)	-	260000	-

08 Feb, 2027

-
-

150

IS 884 (1985)

Apecification for first - Aid hose - Reel for fire fighting (First Revision)

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 5.1(Dimensions)	-	15000	-
Cl 5.1(Dimensions)	-	15000	-
Cl 5.1(Dimensions)	-	15000	-
Cl 5.1(Dimensions)	-	15000	-
Cl 5.1(Dimensions)	-	15000	-
Cl 5.1(Dimensions)	-	15000	-
Cl 5.1(Dimensions)	-	15000	-
Cl 5.1(Dimensions)	-	15000	-
Cl 5.2(Resistance to Leakage)	-	15000	-
Cl 5.3(Strength)	-	15000	-
Cl 5.3(Strength)	-	15000	-
Cl 5.4(Range & Water Flow Rate)	-	15000	-
Cl 5.5(Swinging)	-	15000	-
Cl 5.6(Reel Action)	-	15000	-
Cl 6(Workmanship)	-	15000	-
Cl 7(Painting)	-	15000	-
Cl 5.1(Dimensions)	-	15000	-
Cl 5.1(Dimensions)	-	15000	-
Cl 5.1(Dimensions)	-	15000	-
Cl 5.1(Dimensions)	-	15000	-
Cl 5.1(Dimensions)	-	15000	-
Cl 5.1(Dimensions)	-	15000	-
Cl 5.1(Dimensions)	-	15000	-
Cl 5.1(Dimensions)	-	15000	-
Cl 5.2(Resistance to Leakage)	-	15000	-
Cl 5.3(Strength)	-	15000	-
Cl 5.3(Strength)	-	15000	-
Cl 5.4(Range & Water Flow Rate)	-	15000	-
Cl 5.5(Swinging)	-	15000	-
Cl 5.6(Reel Action)	-	15000	-
Cl 6(Workmanship)	-	15000	-
Cl 7(Painting)	-	15000	-
3.1(Materials)	-	15000	-
Cl 7(Painting)	-	15000	-
Cl 6(Workmanship)	-	15000	-
Cl 5.6(Reel Action)	-	15000	-
Cl 5.5(Swinging)	-	15000	-
Cl 5.4(Range & Water Flow Rate)	-	15000	-
Cl 5.3(Strength)	-	15000	-
Cl 5.3(Strength)	-	15000	-
Cl 5.2(Resistance to Leakage)	-	15000	-
Cl 5.1(Dimensions)	-	15000	-
Cl 5.1(Dimensions)	-	15000	-
Cl 5.1(Dimensions)	-	15000	-
Cl 5.1(Dimensions)	-	15000	-
Cl 5.1(Dimensions)	-	15000	-
Cl 5.1(Dimensions)	-	15000	-
Cl 5.1(Dimensions)	-	15000	-
Cl 5.1(Dimensions)	-	15000	-

08 Feb, 2027

-
-

Bureau of Indian Standards

The National Standards Body of India

Atmy Analytical Labs Private Limited (Unit-2), Greater Noida

B-19, Ecotech,-1 Extension, Kasna, Greater Noida, Gautam Buddha Nagar, Uttar Pradesh, 201310

9910808996 unit2@atmylabs.com

Scope List