BIS - LIMS (Laboratory Information Management System)

Atmy Analytical Labs Private Limited (Unit-2), Greater Noida

B-19, Ecotech,-1 Extension, Kasna, Greater Noida, Gautam Buddha Nagar, Uttar Pradesh, 201310

9910808996 unit2@atmylabs.com

Scope List

Reset

158 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

151

IS 17550 : PART 1 (2021)

HOUSEHOLD REFRIGERATING APPLIANCES CHARACTERISTICS AND TEST METHODS Part 1 General Requirements

260000 View breakup
For direct cool refrigerator - Rs. 2,55,000/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
"Cl. No. 9 "(Testing The Air Tightness Of Door Or Lid Seal(S))	-	260000	-
"Cl. No.10 "(Testing The Opening Force Of Door(S) Or Lid(S))	-	260000	-
"Cl. No.11 "(Testing The Durability Of Hinges And Handles Of Door(S) And Lid(S))	-	260000	-
"Cl. No.12 "(Testing The Mechanical Strength Of Shelves And Similar Components)	-	260000	-
"Cl. No.14 "(Ice-Making Test (If Applicable))	-	260000	-
"Cl. No.15 "(Test For Absence Of Odour And Taste)	-	260000	-
"Cl. No.16 "(Safety Requirements)	-	260000	-
"Cl. No. 9 "(Testing The Air Tightness Of Door Or Lid Seal(S))	-	260000	-
"Cl. No.10 "(Testing The Opening Force Of Door(S) Or Lid(S))	-	260000	-
"Cl. No.11 "(Testing The Durability Of Hinges And Handles Of Door(S) And Lid(S))	-	260000	-
"Cl. No.12 "(Testing The Mechanical Strength Of Shelves And Similar Components)	-	260000	-
"Cl. No.14 "(Ice-Making Test (If Applicable))	-	260000	-
"Cl. No.15 "(Test For Absence Of Odour And Taste)	-	260000	-
"Cl. No.16(a) "(Protection against acess to live parts)	-	260000	-
"Cl. No.16(b) "(Power input and current)	-	260000	-
"Cl. No.16(c) "(Heating)	-	260000	-
"Cl. No.16(d) "(Leakage current and electric strength at operating temperature)	-	260000	-
"Cl. No.16(e) "(Moisture resistance)	-	260000	-
"Cl. No.16(f) "(Leakage current and electric strength)	-	260000	-
"Cl. No.20.3(a) "("Production Routine Test a)Leakage current test ")	-	260000	-
"Cl. No.20.3(b) "(b) Earth continuity tesT)	-	260000	-
"Cl. No.20.3(c) "(c) Electric strength)	-	260000	-
"Cl. No.8.11 "(Thermostat function test)	-	260000	-
"Cl. No.5 "(Markings)	-	260000	-
4(Classification)	-	260000	-
5(Marking)	-	260000	-
6.2(Determination of Linear Dimensions)	-	260000	-
7(Instructions)	-	260000	-
8.2(Material and Finishes)	-	260000	-
8.3(Thermal Insulation and Air Tightness)	-	260000	-
8.4(Doors, Lids and Fittings)	-	260000	-
8.5(Shelves and Containers)	-	260000	-
8.6(Disposal of Defrost Water)	-	260000	-
8.7(Refrigerating System)	-	260000	-
8.8(Supply Cord)	-	260000	-
8.9(Compressor)	-	260000	-
8.10(Temperature Sensing Controls (Thermostat))	-	260000	-
8.11(Temperature Sensing Controls (Thermostat) Setting)	-	260000	-
9(Testing the Air tightness of door or lid seal(s) before water vapour condensation test)	-	260000	-
9(Testing the Air tightness of door or lid seal(s) after water vapour condensation test)	-	260000	-
10(Testing the Opening force of door(s) or lid(s))	-	260000	-
11(Testing the Durability of hinges and handles of door(s) and lid(s))	-	260000	-
12(Testing the Mechanical strength of shelves and similar components)	-	260000	-
13(Water-vapour condensation test)	-	260000	-
14(Ice-making test (if applicable))	-	260000	-
15(Test for absence of odour and taste)	-	260000	-
16(a)(Protection against access to live parts)	-	260000	-
16(b)(Power input and current)	-	260000	-
16 (c(Heating)	-	260000	-
16(d)(Leakage current and electric strength at operating temperature)	-	260000	-
16(e)(Moisture resistance)	-	260000	-
16(f)(Leakage current and electric strength (high voltage after humidity))	-	260000	-
17(Packing)	-	260000	-
18(Designation)	-	260000	-
19(Instructions for Use and Maintenance)	-	260000	-
20.3 (a)(Leakage Current Test)	-	260000	-
20.3 (b)(Earth Continuity Test)	-	260000	-
20.3 (c(Electric Strength Test)	-	260000	-

08 Feb, 2027

-
-

152

IS 884 (1985)

Apecification for first - Aid hose - Reel for fire fighting (First Revision)

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 5.1(Dimensions)	-	15000	-
Cl 5.1(Dimensions)	-	15000	-
Cl 5.1(Dimensions)	-	15000	-
Cl 5.1(Dimensions)	-	15000	-
Cl 5.1(Dimensions)	-	15000	-
Cl 5.1(Dimensions)	-	15000	-
Cl 5.1(Dimensions)	-	15000	-
Cl 5.1(Dimensions)	-	15000	-
Cl 5.2(Resistance to Leakage)	-	15000	-
Cl 5.3(Strength)	-	15000	-
Cl 5.3(Strength)	-	15000	-
Cl 5.4(Range & Water Flow Rate)	-	15000	-
Cl 5.5(Swinging)	-	15000	-
Cl 5.6(Reel Action)	-	15000	-
Cl 6(Workmanship)	-	15000	-
Cl 7(Painting)	-	15000	-
Cl 5.1(Dimensions)	-	15000	-
Cl 5.1(Dimensions)	-	15000	-
Cl 5.1(Dimensions)	-	15000	-
Cl 5.1(Dimensions)	-	15000	-
Cl 5.1(Dimensions)	-	15000	-
Cl 5.1(Dimensions)	-	15000	-
Cl 5.1(Dimensions)	-	15000	-
Cl 5.1(Dimensions)	-	15000	-
Cl 5.2(Resistance to Leakage)	-	15000	-
Cl 5.3(Strength)	-	15000	-
Cl 5.3(Strength)	-	15000	-
Cl 5.4(Range & Water Flow Rate)	-	15000	-
Cl 5.5(Swinging)	-	15000	-
Cl 5.6(Reel Action)	-	15000	-
Cl 6(Workmanship)	-	15000	-
Cl 7(Painting)	-	15000	-
3.1(Materials)	-	15000	-
Cl 7(Painting)	-	15000	-
Cl 6(Workmanship)	-	15000	-
Cl 5.6(Reel Action)	-	15000	-
Cl 5.5(Swinging)	-	15000	-
Cl 5.4(Range & Water Flow Rate)	-	15000	-
Cl 5.3(Strength)	-	15000	-
Cl 5.3(Strength)	-	15000	-
Cl 5.2(Resistance to Leakage)	-	15000	-
Cl 5.1(Dimensions)	-	15000	-
Cl 5.1(Dimensions)	-	15000	-
Cl 5.1(Dimensions)	-	15000	-
Cl 5.1(Dimensions)	-	15000	-
Cl 5.1(Dimensions)	-	15000	-
Cl 5.1(Dimensions)	-	15000	-
Cl 5.1(Dimensions)	-	15000	-
Cl 5.1(Dimensions)	-	15000	-

08 Feb, 2027

-
-

153

IS 636 (2018)

Non - Percolating flexible fire fighting delivery hose - Specification (Fourth Revision)

31000 View breakup
Type 1=Rs. 26500/- Type 2= Rs. 29000/- For ozone resistance test (Cl.6.16)= Rs. 28000/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 6.1.1(Inner lining shall be of rubber or rubberized fabric lining which is generally smooth and practically free from pitting and other imperfections)	-	31000	-
Cl 6.1.2(Externally applied elastomeric coating or covering of the reinforcement, if present shall be generally smooth and practically free from pitting and other imperfections)	-	31000	-
Cl 6.1.3(The jacket shall be practically free from dirt, knots, lumps, irregularities of the yarn and other visible defects.)	-	31000	-
Cl.6.2(The internal diameter of the hose shall be measured by a suitable conical plug gauge and shall conform to the specified diameter with a tolerance of plus 2 and minus 0.0 mm.)	-	31000	-
Cl.6.3(Unless specified otherwise, the standard length shall be 30 m. Unless otherwise specified, a tolerance of ± 2 percent shall be permitted on the length prescribed for the hose by the purchaser but the total of all lengths of hose supplied shall be not less than the total quantity specified by the purchaser.)	-	31000	-
Cl.6.4(The average mass of hose per meter of 2 m length, without couplings attached, shall not be more than that prescribed in Table 1. For the determination of mass, sample of the hose shall be conditioned at 27 ± 2°C and 65 ± 5 percent relative humidity for a period of at least 48 h and then shall be weighed under the same conditions.)	-	31000	-
Cl.6.5(For 30 m length of dry hose without couplings, the coil diameter shall not exceed 45 cm for Type 1, 50 cm for Type 2 and 55 cm for Type 3.)	-	31000	-
Cl.6.6(Each hose length shall be subjected to an internal hydraulic pressure of 23 kgf/cm² in accordance with 8.1 of IS 443 (Part 3) increasing the pressure at the rate not exceeding 10 kgf/cm² per min and maintaining it for 1 min. Within this 1 min, the hose shall neither develop any leakage or sweating, nor shall any thread in the jacket break.)	-	31000	-
Cl.6.7(A test length of hose, 1 m clear of fittings when subjected to an internal hydraulic pressure in accordance with 8.3 of IS 443 (Part 3) while increasing the pressure at the rate not exceeding 10 kgf/cm2 per min shall not burst or show leakage before a pressure of 38 kgf/cm2 is reached)	-	31000	-
Cl.6.8(There shall be no sign of leakage or rupture and no thread in the jacket shall break after retaining the internal hydraulic pressure of 23 kgf/cm2 for 30 seconds.)	-	31000	-
Cl.6.9(The increase in length shall not exceed 6 percent at an internal hydraulic pressure of 10 kgf/cm2 for 2 minutes.)	-	31000	-
Cl.6.10(The increase in diameter shall not be more than 10% at an internal hydraulic pressure of 10 kgf/cm2 for 2 minutes.)	-	31000	-
Cl 6.11 (Adhesion (Cl. 6.11.1))(Rate of separation shall not exceed 25 mm/min 1) Cover)	-	31000	-
Cl 6.11 (Adhesion (Cl. 6.11.1))(Rate of separation shall not exceed 25 mm/min 2) Jet)	-	31000	-
Cl.6.11 Acccleraled Ageing Test (Cl. 6.11.2) - 1)(After ageing, there shall be no tackiness on the surface of lining or the surface of the cover. )	-	31000	-
Cl.6.11 Acccleraled Ageing Test (Cl. 6.11.2) - 2)(shall meet the requirements. given in Cl.6.7 (A test length of hose, 1 m clear of fittings when subjected to an internal hydraulic pressure in accordance with 8.3 of IS 443 (Part 3) while increasing the pressure at the rate not exceeding 10 kgf/cm2 per min shall not burst or show leakage before a pressure of 38 kgf/cm2 is reached))	-	31000	-
Cl.6.11 Acccleraled Ageing Test (Cl. 6.11.2) - 3)(Rate of separation shall not exceed 25 mm/min 1) Cover)	-	31000	-
Cl.6.11 Acccleraled Ageing Test (Cl. 6.11.2) - 3)(Rate of separation shall not exceed 25 mm/min 2) Jet)	-	31000	-
Cl.6.12(When determined by the method described in Annex C, the average number of cycles completed before bursting of three test pieces, shall not be less than the value specified in Table 2.)	-	31000	-
Cl.6.13(When tested in accordance with Annex D, the amount of moisture absorbed shall not exceed 0.20 kg/m2 for Type 2 hoses and 0.02 kg/m2 for Type 3 hoses.)	-	31000	-
Cl.6.14(When tested by the method described in Annex E, none of the test samples shall burst at less than 8 s of the application of the hot cube for Type 2 and 20 s for Type 3 hose.)	-	31000	-
Cl.6.15 (1)(The length shall be laid horizontally and the central fully immersed portion of the hose shall be visually examined for any swelling of rubber, weathering and cracking in the rubber lining)	-	31000	-
Cl.6.15 (2)(Rate of separation shall not exceed 25 mm/min 1) Cover)	-	31000	-
Cl.6.15 (2)(Rate of separation shall not exceed 25 mm/min 2) Jet)	-	31000	-
Cl.6.16(When tested by the method prescribed in IS 443 (Part 1), the lining (for Types 1, 2 and 3) and cover (for Type 3 only) of the hose shall neither develop cracking nor crazing when seen under X2 magnification, except at the cut edges of the hose)	-	31000	-
Cl.6.17(When tested in accordance with Annex F, at a test temperature of, at a test temperature of 300 ± 10°C for Types 1 and 2, and 400 ± 10° C for Type 3, in none of the four tests shall the test piece show signs of leakage within 120 s from the application of the filament rod or on removal of this filament rod after the specified period)	-	31000	-
Cl.6.18(When tested in accordance with Annex H, the pressure loss per 23 m length shall not exceed the values specified in Table 3 at the specified flow rate and inlet pressure (Recommendations for pressure testing of hoses in service are given at Annex G).)	-	31000	-

08 Feb, 2027

-
-

154

IS 4308 (2019)

Dry Chemical Powders for Fire Fighting — BC, ABC and D Types — Specification ( Third Revision )

all

135000 View breakup
Fire test for BC type= Rs. 40000/- Fire test for ABC type= Rs. 60000/- Fire test for D type= Rs. 12000/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 5 Table 1(i)(Main Chemical constituent-Sodium/Potassium bicarbonate )	-	135000	-
Clause 5 Table 1(iii)(Apparent density (Declared value by the manufacturer))	-	135000	-
Clause 5 Table 1(iv)(Particle size / sieve analysis (Declared value by the manufacturer))	-	135000	-
Clause 5 Table 1(vi)(Water repellency)	-	135000	-
Clause 5 Table 1(vii)(Moisture content)	-	135000	-
Clause 5 Table 1(viii)(Rate of flow)	-	135000	-
Clause 5 Table 1(ix)(Foam compatibility (required if declared by the manufacturer))	-	135000	-
Clause 5 Table 1(x)(Fire test)	-	135000	-
Clause 5 Table 1(xi)(Temperature resistance test)	-	135000	-
Clause 5 Table 1(xii)(colour)	-	135000	-
Clause 5 Table 1(i)(Main chemical constituent-(Monoammonuim phosphate))	-	135000	-
Clause 5 Table 1(iii)(Apparent density (Declared value by the manufacturer))	-	135000	-
Clause 5 Table 1(iv)(Particle size / sieve analysis (Declared value by the manufacturer))	-	135000	-
Clause 5 Table 1(vi)(Water repellency)	-	135000	-
Clause 5 Table 1(vii)(Moisture content)	-	135000	-
Clause 5 Table 1(viii)(Rate of flow)	-	135000	-
Clause 5 Table 1(ix)(Foam compatibility (required if declared by the manufacturer))	-	135000	-
Clause 5 Table 1(x)(Fire test)	-	135000	-
Clause 5 Table 1(xi)(Temperature resistance test)	-	135000	-
Clause 5 Table 1(xii)(colour)	-	135000	-
Clause 5 Table 1(i)(Main chemical constituent(Eutectic mixture of chlorides of sodium, potassium and barium))	-	135000	-
Clause 5 Table 1(iii)(Apparent density (Declared value by the manufacturer))	-	135000	-
Clause 5 Table 1(iv)(Particle size / sieve analysis (Declared value by the manufacturer))	-	135000	-
Clause 5 Table 1(vi)(Water repellency)	-	135000	-
Clause 5 Table 1(vii)(Moisture content)	-	135000	-
Clause 5 Table 1(viii)(Rate of flow)	-	135000	-
Clause 5 Table 1(x)(Fire test)	-	135000	-
Clause 5 Table 1(xi)(Temperature resistance test)	-	135000	-
Clause 5 Table 1(xii)(colour)	-	135000	-
Clause No. 5, Sr. No. XII of Table 1(Colour of 'D' Powder)	-	135000	-
Clause No. 5, Sr. No. XII of Table 1(Colour of 'BC' Powder)	-	135000	-
Clause No. 5, Sr. No. XII of Table 1(Colour of 'ABC' Powder)	-	135000	-
Clause No. 5, Sr. No. XI of Table 1, Annex-K(Temperature Resistance Test)	-	135000	-
Clause No. 5, Sr. No. X of Table 1, Annex-J(Fire test for Class 'D')	-	135000	-
Clause No. 5, Sr. No. X of Table 1, Annex-J(Fire test for Class 'B')	-	135000	-
Clause No. 5, Sr. No. X of Table 1, Annex-J(Fire test for Class 'A')	-	135000	-
Clause No. 5, Sr. No. IX of Table 1, Annex-H(Foam Compatibility)	-	135000	-
Clause No. 5, Sr. No. VIII of Table 1, Annex-G(Rate of flow/ Free flowing Characteristic for Class D Powder)	-	135000	-
Clause No. 5, Sr. No. VIII of Table 1, Annex-G(Rate of flow/ Free flowing Characteristic)	-	135000	-
Clause No. 5, Sr. No. VII of Table 1, Annex-F(Moisture Content)	-	135000	-
Clause No. 5, Sr. No. VI of Table 1, Annex-E(Water Repellency)	-	135000	-
Clause No. 5, Sr. No. V of Table 1, Annex-D(Hygroscopicity)	-	135000	-
Clause No. 5, Sr. No. IV of Table 1, Annex-C(Particle Size/ Sieve Analysis)	-	135000	-
Clause No. 5, Sr. No. III of Table 1, Annex-B(Aparent Denisty)	-	135000	-
Clause No. 5, Sr. No. II of Table 1, Annex-A(Minimum Main Chemical Constituent for D Powder)	-	135000	-
Clause No. 5, Sr. No. II of Table 1, Annex-A(Minimum Main Chemical Constituent for BC Powder)	-	135000	-
Clause No. 5, Sr. No. II of Table 1, Annex-A(Minimum Main Chemical Constituent for ABC Powder)	-	135000	-
Clause No. 5, Sr. No. I of Table 1, Annex-A(Main Chemical Constituent for D Powder)	-	135000	-
Clause No. 5, Sr. No. I of Table 1, Annex-A(Main Chemical Constituent for BC Powder)	-	135000	-
Clause No. 5, Sr. No. I of Table 1, Annex-A(Main Chemical Constituent of ABC Powder)	-	135000	-
Clause 5 Table 1(iv)(Particle size / sieve analysis (Declared value by the manufacturer))	-	135000	-
Clause 5 Table 1(i)(Minimum main chemical constituent)	-	135000	-
Clause 5 Table 1(iii)(Apparent density (Declared value by the manufacturer))	-	135000	-
Clause 5 Table 1(v)(Hygroscopicity)	-	135000	-
Clause 5 Table 1(vi)(Water repellency)	-	135000	-
Clause 5 Table 1(vii)(Moisture Content)	-	135000	-
Clause 5 Table 1(xii)(Colour)	-	135000	-

08 Feb, 2027

-
-

155

IS 16890 (2018)

Textiles - Protective clothing for firefighters - Specification

all

46500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.5.1 Table-2, Cl.D-2(Permissible No. of Defectives)	-	46500	-
Cl.5.1 Table-2, Cl.D-2(Sample Size (No. of Protective Clothing))	-	46500	-
Cl.5.1 Table-2, Cl.D-2(Number of Protective Clothing in the Lot)	-	46500	-
Cl.5.1 Annec-D(Sampling and criteria for conformity)	-	46500	-
Cl.4.2.7 Annex-c(Requirements for visibility)	-	46500	-
Cl.7.3(Manufacturers’ Information)	-	46500	-
Cl.7.2(Label Legibility)	-	46500	-
Cl.7.1(Label)	-	46500	-
Cl.7(Marking)	-	46500	-
Cl.6.12(Water-vapour Resistance)	-	46500	-
Cl.6.11(Water-penetration Resistance)	-	46500	-
Cl.6.10(Liquid-chemical Penetration Resistance)	-	46500	-
Cl.6.9(Cleaning-shrinkage Resistance)	-	46500	-
Cl.6.8(Surface Wetting)	-	46500	-
Cl.6.7(Tear Strength)	-	46500	-
Cl.6.6(Tensile Strength)	-	46500	-
Cl.6.5(Heat Resistance)	-	46500	-
Cl.6.4(Residual Strength of Material when Exposed to Radiant Heat)	-	46500	-
Cl.6.3(Heat Transfer (Radiant Exposure))	-	46500	-
Cl.6.2(Heat Transfer (Flame Exposure))	-	46500	-
Cl.6.1(Flame Resistance)	-	46500	-
Cl.6(Performance requirements)	-	46500	-
Cl.5.4(Pre-treatment)	-	46500	-
Cl.5.3(Exposure Surface)	-	46500	-
Cl.5.2(Number and Size of Specimens)	-	46500	-
Cl.5.1(Samples)	-	46500	-
Cl.5(Sampling and Pre-treatment)	-	46500	-
Cl.4.12(Height )	-	46500	-
Cl.4.12(Chest or Bust Girth )	-	46500	-
Cl.4.12(Size Designations)	-	46500	-
Cl.4.2.11(Labels)	-	46500	-
Cl.4.2.10(Ease of Cleaning)	-	46500	-
Cl.4.2.9(Clothing Mass)	-	46500	-
Cl.4.2.8(Sleeve Ends)	-	46500	-
Cl.4.2.7(Retroreflective Elements)	-	46500	-
Cl.4.2.6(Closure Systems)	-	46500	-
Cl.4.2.5(Hardware)	-	46500	-
Cl.4.2.4(Seams)	-	46500	-
Cl.4.2.3(Multilayer Clothing Assemblies)	-	46500	-
Cl.4.2.2(Restriction of Movement)	-	46500	-
Cl.4.2.1(Configuration)	-	46500	-
Cl.4.2(Design Requirements)	-	46500	-
Cl.4.1(General)	-	46500	-

08 Feb, 2027

-
-

156

IS 16874 (2018)

Textiles - Protective gloves for firefighters - Specification

all

42500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Component Assembly)	-	42500	-
4.2(Glove Body Length)	-	42500	-
4.3(Wristlet or Cuff)	-	42500	-
4.4(Glove Sizing)	-	42500	-
4.5(pH Value)	-	42500	-
4.6(Leather Chromium VI Content)	-	42500	-
4.7(Other Design Requirements)	-	42500	-
6.2.1(Flame Resistance)	-	42500	-
6.2.2(Heat Transfer (Flame Exposure))	-	42500	-
6.2.3(Heat Transfer (Radiant Exposure))	-	42500	-
6.2.4(Heat Transfer (Conductive Exposure))	-	42500	-
6.2.5(Heat Resistance)	-	42500	-
6.3.1(Abrasion Resistance)	-	42500	-
6.3.2(Cut Resistance)	-	42500	-
6.3.3(Tear Resistance)	-	42500	-
6.3.4(Puncture Resistance)	-	42500	-
6.3.5(Seam Breaking Strength)	-	42500	-
6.3.6(Label Legibility)	-	42500	-
6.4.1(Water Penetration Resistance)	-	42500	-
6.4.2(Liquid Penetration Resistance)	-	42500	-
6.5.1(Dexterity)	-	42500	-
6.5.2(Grip)	-	42500	-
6.5.3(Donning)	-	42500	-
6.6(Visibility)	-	42500	-
7(MARKING)	-	42500	-
4(Design Garments)	-	42500	-
4.5(p H Value)	-	42500	-
4.6(Leather Chromium VI Content)	-	42500	-
5.4.1("Pre-treatments (a) Washing Pre-treatment (Five Washings) [IS 15370-2A(60±3)ºC followed by tumble dry delicate (A wash cycle is one wash and one drying) ")	-	42500	-
5.4.2(Pre-treatments (b) Dry Conditioning)	-	42500	-
5.4.3(Pre-treatments (c) Wet Conditioning)	-	42500	-
6.2.1.1(Flame Resistance (a) before pre-treatment)	-	42500	-
6.2.1.1(Flame Resistance (b) after the pre-treatment as specified in 5.4.1 and then followed by the pre-treatment in 5.4.2)	-	42500	-
6.2.1.2(Flame Resistance -Wristlet material (a) before pre-treatment)	-	42500	-
6.2.1.2(Flame Resistance -Wristlet material (b) after the pre-treatment as specified in 5.4.1 and then followed by the pre-treatment in 5.4.2)	-	42500	-
6.2.1.3(Seam portion of the component assembly (a) before pre-treatment)	-	42500	-
6.2.1.3(Seam portion of the component assembly (b) after the pre-treatment as specified in 5.4.1 and then followed by the pre-treatment in 5.4.2)	-	42500	-
6.2.2.2(Heat Transfer (Flame Exposure) (a) after the pre-treatment as specified in 5.4.2)	-	42500	-
6.2.2.2(Heat Transfer (Flame Exposure) (b) after the pre-treatment as specified in 5.4.1 and then followed by the pre-treatment in 5.4.2)	-	42500	-
6.2.2.3(Heat Transfer (Flame Exposure) where difference in Palm and back portion Palm side of the gloves (a) before pre-treatment)	-	42500	-
6.2.2.3(Heat Transfer (Flame Exposure) where difference in Palm and back portion Palm side of the gloves (b) after the pre-treatment as specified in 5.4.1 and then followed by the pre-treatment in 5.4.2)	-	42500	-
6.2.2.3(Heat Transfer (Flame Exposure) where difference in Palm and back portion Back side of the gloves (a) before pre-treatment)	-	42500	-
6.2.2.3(Heat Transfer (Flame Exposure) where difference in Palm and back portion Back side of the gloves (b) after the pre-treatment as specified in 5.4.1 and then followed by the pre-treatment in 5.4.2)	-	42500	-
6.2.3.2(Heat Transfer (Radiant Exposure) (a) after the pre-treatment as specified in 5.4.2)	-	42500	-
6.2.3.2(Heat Transfer (Radiant Exposure) (b) after the pre-treatment as specified in 5.4.1 and then followed by the pretreatment in 5.4.2)	-	42500	-
6.2.3.2(Heat Transfer (Radiant Exposure) where difference in Palm and back portion Palm side of the gloves (a) before pre-treatment)	-	42500	-
6.2.3.2(Heat Transfer (Radiant Exposure) where difference in Palm and back portion Palm side of the gloves (b) after the pre-treatment as specified in 5.4.1 and then followed by the pre-treatment in 5.4.2)	-	42500	-
6.2.3.3(Heat Transfer (Radiant Exposure) where difference in Palm and back portion Palm side of the gloves (a) before pre-treatment)	-	42500	-
6.2.3.3(Heat Transfer (Radiant Exposure) where difference in Palm and back portion Palm side of the gloves (b) after the pre-treatment as specified in 5.4.1 and then followed by the pre-treatment in 5.4.2)	-	42500	-
6.2.3.3(Heat Transfer (Radiant Exposure) where difference in Palm and back portion Back side of the gloves (a) before pre-treatment)	-	42500	-
6.2.3.3(Heat Transfer (Radiant Exposure) where difference in Palm and back portion Back side of the gloves (b) after the pre-treatment as specified in 5.4.1 and then followed by the pre-treatment in 5.4.2)	-	42500	-
6.2.4.2(Heat Transfer (Conductive Exposure) (a) after the pre-treatment as specified in 5.4.2)	-	42500	-
6.2.4.2(Heat Transfer (Conductive Exposure)(b) after the pre-treatment as specified in 5.4.1 and then followed by the pretreatment in 5.4.2)	-	42500	-
6.2.4.2(Heat Transfer (Conductive Exposure) (c) after the pre-treatment as specified in 5.4.1 and then followed by the pre-treatment in 5.4.3)	-	42500	-
6.2.4.3(Heat Transfer (Conductive Exposure) where difference in Palm and back portion Palm side of the gloves (a) after the pre-treatment as specified in 5.4.2)	-	42500	-
6.2.4.3(Heat Transfer (Conductive Exposure) where difference in Palm and back portion Palm side of the gloves (b) after the pre-treatment as specified in 5.4.1 and then followed by the pretreatment in 5.4.2)	-	42500	-
6.2.4.3(Heat Transfer (Conductive Exposure) where difference in Palm and back portion Palm side of the gloves (c) after the pre-treatment as specified in 5.4.1 and then followed by the pre-treatment in 5.4.3)	-	42500	-
6.2.4.3(Heat Transfer (Conductive Exposure) where difference in Palm and back portion Back side of the gloves (a) after the pre-treatment as specified in 5.4.2)	-	42500	-
6.2.4.3(Heat Transfer (Conductive Exposure) where difference in Palm and back portion Back side of the gloves (b) after the pre-treatment as specified in 5.4.1 and then followed by the pretreatment in 5.4.2)	-	42500	-
6.2.4.3(Heat Transfer (Conductive Exposure) where difference in Palm and back portion Back side of the gloves (c) after the pre-treatment as specified in 5.4.1 and then followed by the pre-treatment in 5.4.3)	-	42500	-
6.2.5.1(Heat Resistance (Complete glove specimens) (a) before pre-treatment)	-	42500	-
6.2.5.1(Heat Resistance (Complete glove specimens) (b) after the pretreatment specified 5.4.1)	-	42500	-
6.2.5.2(Heat Resistance (Inner most lining of the glove body component assembly) (a) before)	-	42500	-
6.2.5.2(Heat Resistance (Inner most lining of the glove body component assembly) (b) after the pretreatment specified 5.4.1)	-	42500	-
6.3.1.1(Abrasion Resistance (a) after the pretreatment specified 5.4.2)	-	42500	-
6.3.1.2(Abrasion Resistance, where difference in Palm and back portion Back side of the gloves (a) after the pretreatment specified 5.4.2)	-	42500	-
6.3.2.1(Cut Resistance (a) after the pre-treatment as specified in 5.4.2)	-	42500	-
6.3.2.1(Cut Resistance (b) after the pre-treatment as specified in 5.4.3)	-	42500	-
6.3.2.2(Cut Resistance, where difference in Palm and back portion Palm side of the gloves (a) after the pre-treatment as specified in 5.4.2)	-	42500	-
6.3.2.2(Cut Resistance, where difference in Palm and back portion Palm side of the gloves(b) after the pre-treatment as specified in 5.4.3)	-	42500	-
6.3.2.2(Cut Resistance, where difference in Palm and back portion Back side of the gloves (a) after the pre-treatment as specified in 5.4.2)	-	42500	-
6.3.2.2(Cut Resistance, where difference in Palm and back portion Back side of the gloves (b) after the pre-treatment as specified in 5.4.3)	-	42500	-
6.3.2.2(Cut Resistance, where difference in Palm and back portion Cuffs or Wristlets (a) after the pre-treatment as specified in 5.4.2)	-	42500	-
6.3.2.2(Cut Resistance, where difference in Palm and back portion Cuffs or Wristlets (b) after the pre-treatment as specified in 5.4.3)	-	42500	-
6.3.3.1(Tear Resistance (a) after the pre-treatment specified in 5.4.2)	-	42500	-
6.3.3.2(Tear Resistance Palm side of the gloves (a) after the pre-treatment specified in 5.4.2)	-	42500	-
6.3.3.2(Tear Resistance Back side of the gloves (a) after the pre-treatment specified in 5.4.2)	-	42500	-
6.3.4.1(Puncture Resistance (a) after the pre-treatment as specified in 5.4.2)	-	42500	-
6.3.4.2(Puncture Resistance Palm side of the gloves (a) after the pre-treatment as specified in 5.4.2)	-	42500	-
6.3.4.2(Puncture Resistance Palm side of the gloves(b) after the pre-treatment as specified in 5.4.3)	-	42500	-
6.3.4.2(Puncture Resistance Back side of the gloves (a) after the pre-treatment as specified in 5.4.2)	-	42500	-
6.3.4.2(Puncture Resistance Back side of the gloves(b) after the pre-treatment as specified in 5.4.3)	-	42500	-
6.3.5(Seam Breaking Strength)	-	42500	-
6.4.1(Water Penetration Resistance (a) after the pre-treatment as specified in 5.4.1)	-	42500	-
6.4.1(Water Penetration Resistance(b) after the pre-treatment as specified in 5.4.2)	-	42500	-
6.4.2(Liquid Penetration Resistance (a) after the pre-treatment as specified in 5.4.1)	-	42500	-
6.5.1(Dexterity (a) after the pre-treatment as specified in 5.4.1)	-	42500	-
6.5.2(Grip (a) after the pre-treatment as specified in 5.4.1)	-	42500	-
6.5.2(Grip(b) after the pre-treatment as specified in 5.4.3)	-	42500	-
6.5.3(Donning (a) after the pre-treatment as specified in 5.4.1)	-	42500	-

08 Feb, 2027

-
-

157

IS 16018 (2012)

Wheeled fire extinguishers - Performance and construction - Specification

all

265000 View breakup
Rs. 45,500/- (excluding fire performance test) For A - Class Fire Performance Test: 3A-Rs. 21,000/- 4A-Rs. 30,000/- 6A-Rs. 35,000/- 10A A-Rs. 47,000/- 15A-Rs. 60,000/- 20A-Rs. 80,000/- For B - Class Fire Performance Test: 8B-Rs. 6,000/- 13B-Rs. 6,500/- 21B-Rs. 8,500/- 34B-Rs. 32,000/- 55B-Rs. 40,000/- 70B-Rs. 45,000/- 89B-Rs. 55,000/- 113B-Rs. 60,000/- 144B-Rs. 65,000/- 183B-Rs. 75,000/- 233B-Rs. 85,000/- For D - Class Fire Performance Test- Rs. 15,000/- For Electrical Conductivity of Extinguisher Discharge - Rs. 35,000/- For Composite Cylinders- Rs. 8,000/- For Pressure Gauge - Rs. 10,000/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 8.4.1.1(Sulphur)	-	265000	-
Clause 8.4.1.1(Phosphorus)	-	265000	-
Clause 8.4.1.1(Carbon)	-	265000	-
Clause 8.4.2.2(Carbon)	-	265000	-
Cl 4(Types of Wheeled Fire Extinguishers)	-	265000	-
Cl 5.3(Fill Density)	-	265000	-
Cl 5.4(Filling Tolerance)	-	265000	-
Cl 5.5.1(Nominal Charge)	-	265000	-
Cl 6.1(Operating Temperature)	-	265000	-
Cl 6.2.1(Effective Discharge Time)	-	265000	-
Cl 6.2.2(Bulk Range)	-	265000	-
Cl 6.3(Resistance To Temperature Changes)	-	265000	-
Cl 6.5(Intermittent Discharge Test)	-	265000	-
Cl 7.5.1(Resistance to Impact)	-	265000	-
Cl 7.5.2(Resistance to Vibration)	-	265000	-
Cl 7.6(Resistance to Corrosion)	-	265000	-
Cl 7.7(Tapping Test)	-	265000	-
Cl 7.8(Intermittent Discharge Test)	-	265000	-
Cl 8.1(Rating Sutability for Various Classes of Fire)	-	265000	-
Cl 9.1(High Pressure Extinguishers)	-	265000	-
Cl 9.1.1(Pressure Cycling Test)	-	265000	-
Cl 9.2(Low Pressure Extinguishers)	-	265000	-
Cl 9.2.5(Welded Low Carbon Steel Cylinder)	-	265000	-
Cl 9.2.6(Stainless Steel Cylinder)	-	265000	-
Cl 9.2.7(Aluminium Cylinder)	-	265000	-
Cl 9.3(Carrying Handle)	-	265000	-
Cl 9.4(Mounting)	-	265000	-
Cl 9.5(Caps, Valves and Closures)	-	265000	-
Cl 9.8.2(Requirements for Normally Pressurized Components)	-	265000	-
Cl 9.8.3(Ultraviolet Light Exposure)	-	265000	-
Cl 9.8.4(Impact Resistance)	-	265000	-
Cl 9.8.5(Normally Non Pressurized Components)	-	265000	-
Cl 9.8.6(Test for Exposure to Extinguishing Medium)	-	265000	-
Cl 9.9(Hose Assemblies)	-	265000	-
Cl 9.11(Safety Locking Devices)	-	265000	-
Cl 9.12.1(General )	-	265000	-
Cl 9.12.2(Gauges and Indicators)	-	265000	-
Cl 9.12.3(Gauges and Indicators)	-	265000	-
Cl 9.12.4(Gauges and Indicators)	-	265000	-
Cl 9.12.5(Gauges and Indicators)	-	265000	-
Cl 9.12.6(Gauges and Indicators)	-	265000	-
Cl 9.12.7(Gauges and Indicators)	-	265000	-
Cl 9.13(Water Based Extinguishers)	-	265000	-
Cl 9.14(Special Requirements for CO2 Extinguishers)	-	265000	-
Cl 10.1(Colour)	-	265000	-
9.1(Colour)	-	265000	-
8.18.3(Hose Retaining Unit)	-	265000	-
8.18.2(Mobility)	-	265000	-
8.18.1(Carriage Assembly)	-	265000	-
8.17(Dip tubes and Filters for water based Extinguisher)	-	265000	-
8.16(Pressure gauges for low pressure extinguishers)	-	265000	-
8.15(Safety Locking Devices)	-	265000	-
8.14(Method of operation for gas cartridge type extinguishers)	-	265000	-
8.14(Method of operation for carbon dioxide extinguishers)	-	265000	-
8.13.3(Load test on discharge horn)	-	265000	-
8.13.2(Requirement to prevent loosening or detachment)	-	265000	-
8.13.1(Horn of carbon dioxide extinguisher)	-	265000	-
8.12(Control valve test)	-	265000	-
8.11.3(Requirement of burst pressure of hose assemblies for carbon dioxide fire extinguishers)	-	265000	-
8.11.2(Requirement of hose and coupling system)	-	265000	-
8.11.1(Requirement of the Discharge Assemblies)	-	265000	-
8.9.2(Leakage Test)	-	265000	-
8.8(Safety and Anti-overfill devices)	-	265000	-
8.7.6(Requirement of edges and surfaces)	-	265000	-
8.7.5(Requirement of burst test of cap,valve and closure)	-	265000	-
8.7.4(Requirement of collar)	-	265000	-
8.7.3(Requirement of filling opening diameter)	-	265000	-
8.7.2(Requirement of threaded connections on cylinder)	-	265000	-
8.7.1(Caps valves and closure)	-	265000	-
8.6(Minimum wall thickness of the cylinder)	-	265000	-
8.3.3(Pressure cycling Test)	-	265000	-
8.3.2(Deformation Test)	-	265000	-
8.3.1(Burst Test)	-	265000	-
8.2(High Pressure Cylinder)	-	265000	-
8.1.7(Drain Plug)	-	265000	-
8.1.6(Thread of Plastic Components)	-	265000	-
8.1.4(Construction Requirement)	-	265000	-
8.1.3(Requirement of Welding)	-	265000	-
8.1.2(Leakage Observation during conditioning Test)	-	265000	-
6.7.4(Displaced Test)	-	265000	-
6.7.3(Nozzle Drop Test)	-	265000	-
6.7.2(Durability test of trailer mounted fire extinguisher)	-	265000	-
6.7.1(Observation of Durability Test after Nozzle Drop Test and Displaced Test)	-	265000	-
6.6.2(Internal Corrosion Test)	-	265000	-
6.6.1(External Corrosion Test)	-	265000	-
6.4(Retention of charge)	-	265000	-
5.5.2(Gross Mass)	-	265000	-
3.16 and 8.1.1(Determination of maximum service pressure)	-	265000	-
3.19 and 8.3(Determination of Service Pressure)	-	265000	-
7.2(Class 'B' Fire Test 233B)	-	265000	-
7.2(Class 'B' Fire Test 183B)	-	265000	-
7.2(Class 'B' Fire Test 144B)	-	265000	-
7.2(Class 'B' Fire Test 113B)	-	265000	-
7.2(Class 'B' Fire Test 89B)	-	265000	-
7.2(Class 'B' Fire Test 70B)	-	265000	-
7.2(Class 'B' Fire Test 55B)	-	265000	-
7.2(Class 'B' Fire Test 34B)	-	265000	-
7.2(Class 'B' Fire Test 21B)	-	265000	-
7.2(Class 'B' Fire Test 13B)	-	265000	-
7.2(Class 'B' Fire Test 8B)	-	265000	-
7.2(Class 'A' Fire Test 20A)	-	265000	-
7.2(Class 'A' Fire Test 15A)	-	265000	-
7.2(Class 'A' Fire Test 10A)	-	265000	-
7.2(Class 'A' Fire Test 6A)	-	265000	-
7.2(Class 'A' Fire Test 4A)	-	265000	-
7.2(Class 'A' Fire Test 3A)	-	265000	-
7.2(Class 'A' Fire Test 2A)	-	265000	-
7.2(Class 'A' Fire Test 1A)	-	265000	-
Cl no 4(16018 :2012)	-	265000	-
Cl no 5.3(16018 :2012)	-	265000	-
Cl no 5.4(16018 :2012)	-	265000	-
Cl no 5.5.1(16018 :2012)	-	265000	-
Cl no 5.5.2(16018 :2012)	-	265000	-
Cl no 6.1(16018 :2012)	-	265000	-
Cl no 6.2.1 & 6.2.1.1(16018 :2012)	-	265000	-
Cl no 6.2.2 & 6.2.2.1(16018 :2012)	-	265000	-
Cl no 6.3 & 6.3.1(16018 :2012)	-	265000	-
Cl no 6.4(16018 :2012)	-	265000	-
Cl no 6.5(16018 :2012)	-	265000	-
Cl no 6.6.1(16018 :2012)	-	265000	-
Cl no 6.6.2(16018 :2012)	-	265000	-
Cl no 6.7(16018 :2012)	-	265000	-
Cl no 6.8(16018 :2012)	-	265000	-
Cl no 7.1(16018 :2012)	-	265000	-
Cl no 8.2(16018 :2012)	-	265000	-
Cl no 8.1(16018 :2012)	-	265000	-
Cl no 8.3(16018 :2012)	-	265000	-
Cl no 8.3.1(16018 :2012 Burst test)	-	265000	-
Cl no 8.3.2(16018 :2012)	-	265000	-
Cl no 8.3.3(16018 :2012)	-	265000	-
Cl no 8.4.1(Welded low carbon steel)	-	265000	-
Cl no 8.4.2.2(16018 :2012)	-	265000	-
Cl no 8.6(16018 :2012)	-	265000	-
Cl no 8.7(16018 :2012)	-	265000	-
Cl no 8.7.2(16018 :2012)	-	265000	-
Cl no 8.7.3(16018 :2012)	-	265000	-
Cl no 8.7.4(16018 :2012)	-	265000	-
Cl no 8.7.5(16018 :2012)	-	265000	-
Cl no 8.7.6(16018 :2012)	-	265000	-
Cl no 8.8.1(16018 :2012)	-	265000	-
Cl no 8.8.2(16018 :2012)	-	265000	-
Cl no 8.9.2(16018 :2012)	-	265000	-
Cl no 8.12(16018 :2012)	-	265000	-
Cl no 8.13.1 to 8.13.3(Horn for Carbon Di-oxide Extinguishers)	-	265000	-
Cl no 8.14(16018 :2012)	-	265000	-
Cl no 8.15(16018 :2012)	-	265000	-
Cl no 8.17(16018 :2012)	-	265000	-
Cl no 8.18.1(16018 :2012)	-	265000	-
Cl no 8.18.2(16018 :2012)	-	265000	-
Cl no 8.18.3(16018 :2012)	-	265000	-
Cl no 9.1(16018 :2012)	-	265000	-
Cl no 9.2(16018 :2012)	-	265000	-
Cl no 4(16018 :2012)	-	265000	-
Cl no 5.4(16018 :2012)	-	265000	-
Cl no 5.3(16018 :2012)	-	265000	-
Cl no 5.5.1(16018 :2012)	-	265000	-
Cl no 5.5.2(16018 :2012)	-	265000	-
Cl no 6.1(16018 :2012)	-	265000	-
Cl no 6.2.1 & 6.2.1.1(16018 :2012)	-	265000	-
Cl no 6.2.2 & 6.2.2.1(16018 :2012)	-	265000	-
Cl no 6.3 & 6.3.1(16018 :2012)	-	265000	-
Cl no 6.4(16018 :2012)	-	265000	-
Cl no 6.5(16018 :2012)	-	265000	-
Cl no 6.6.1(16018 :2012)	-	265000	-
Cl no 6.6.2(16018 :2012)	-	265000	-
Cl no 6.7(16018 :2012)	-	265000	-
Cl no 6.8(16018 :2012)	-	265000	-
Cl no 7.1(16018 :2012)	-	265000	-
Cl no 8.1(16018 :2012)	-	265000	-
Cl no 8.2(16018 :2012)	-	265000	-
Cl no 8.3(16018 :2012)	-	265000	-
Cl no 8.3.1(16018 :2012)	-	265000	-
Cl no 8.3.2(16018 :2012)	-	265000	-
Cl no 8.3.3(16018 :2012)	-	265000	-
Cl no 8.4.1(16018 :2012)	-	265000	-
Cl no 8.4.2(16018 :2012)	-	265000	-
Cl no 8.6(16018 :2012)	-	265000	-
Cl no 8.7(16018 :2012)	-	265000	-
Cl no 8.7.2(16018 :2012)	-	265000	-
Cl no 8.7.3(16018 :2012)	-	265000	-
Cl no 8.7.4(16018 :2012)	-	265000	-
Cl no 8.7.5(16018 :2012)	-	265000	-
Cl no 8.7.6(16018 :2012)	-	265000	-
Cl no 8.8.1(16018 :2012)	-	265000	-
Cl no 8.9.2(16018 :2012)	-	265000	-
Cl no 8.11.1 to 8.11.3(Discharge assembly)	-	265000	-
Cl no 8.12(16018 :2012)	-	265000	-
Cl no 8.13.1(16018 :2012)	-	265000	-
Cl no 8.14(16018 :2012)	-	265000	-
Cl no 8.15(16018 :2012)	-	265000	-
Cl no 8.17(16018 :2012)	-	265000	-
Cl no 8.18.1(16018 :2012)	-	265000	-
Cl no 8.18.2(16018 :2012)	-	265000	-
Cl no 8.18.3(16018 :2012)	-	265000	-
Cl no 9.1(16018 :2012)	-	265000	-
Cl no 9.2(16018 :2012)	-	265000	-

08 Feb, 2027

-
-

158

IS 15683 (2018)

Portable Fire Extinguishers — Performance and Construction — Specification ( First Revision )

all

301000 View breakup
Total Mechanical & Chemical test except Composite Cylinders for Plastic Body Test & Fire Tests For BC Powder Type - Rs. 48,300.00 ABC Powder Type – Rs. 49,500.00 D Powder Type - Rs. 47,100.00 Foam Type Rs 55,500.00 Water Type - Rs. 54,300.00 Water mist Type- Rs. 84,300.00 F Class Type - Rs. 54,300.00 Clean Agent Type-Rs. 47,700.00 CO2 Type - Rs. 31,300.00 Details testing charges of fire tests and electrical conductivity of extinguisher discharge test are as follows: For A Class Fire Test (Cl.8.3) 1A-Rs. 17,000/- 2A-Rs. 19,000/- 3A-Rs. 21,000/- 4A-Rs. 30,000/- 6A-Rs. 35,000/- 10A A-Rs. 52,500/- 15A-Rs. 70,000/- 20A-Rs. 95,000/- For B Class Fire Test (Cl.8.4) 8B-Rs. 9,000/- 13B-Rs. 11,000/- 21B-Rs. 13,000/- 34B-Rs. 30,000/- 55B-Rs. 40,000/- 70B-Rs. 45,000/- 89B-Rs. 55,000/- 113B-Rs. 60,000/- 144B-Rs. 65,000/- 183B-Rs. 75,000/- 233B-Rs. 85,000/- For D Class Ext.(Cl.8.5) Rs. 15,000/- For F Class Fire Tests (Cl.8.6 & 8.7) For 5F-Rs. 12,000/- For 15F-Rs. 16,500/- For 25F-Rs. 30,000/- For 75F-Rs. 45,000/- For electrical conductivity of extinguisher discharge (C1.8.8)- Rs.30,000/- For composite cylinders (Cl.9.2.8)- Rs. 6,000/- For pressure gauge (Cl.9.11)- Rs.8,000/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 5.3.1(Filling Requirements)	-	301000	-
Cl. 5.3.2(Filling Requirements)	-	301000	-
Cl. 5.3.2(Filling Requirements)	-	301000	-
Cl. 5.3.2(Filling Requirements)	-	301000	-
Cl. 5.3.2(Filling Requirements)	-	301000	-
Cl. 5.3.2(Filling Requirements)	-	301000	-
Cl. 5.3.2(Filling Requirements)	-	301000	-
Cl. 5.3.3(Capacities)	-	301000	-
Cl. 5.3.3(Capacities)	-	301000	-
Cl. 5.3.3(Capacities)	-	301000	-
Cl. 5.3.3(Capacities)	-	301000	-
Cl. 5.3.3(Capacities)	-	301000	-
Cl. 5.3.3(Capacities)	-	301000	-
Cl. 6(PRESSURE REQUIREMENTS FOR LOW PRESSURE EXTINGUISHERS)	-	301000	-
Cl. 6(PRESSURE REQUIREMENTS FOR LOW PRESSURE EXTINGUISHERS)	-	301000	-
Cl. 7.1(GENERAL OPERATING PERFORMANCE REQUIREMENTS)	-	301000	-
Cl. 7.2 - Table 1(GENERAL OPERATING PERFORMANCE REQUIREMENTS)	-	301000	-
Cl. 7.2 - Table 1(GENERAL OPERATING PERFORMANCE REQUIREMENTS)	-	301000	-
Cl. 7.3(Resistance to Temperature changes)	-	301000	-
Cl 7.4.3( Leakage Test)	-	301000	-
Cl 7.5.1(Impact Resistance Test)	-	301000	-
Cl 7.5.2(Vibration Resistance Test)	-	301000	-
Cl 7.6(Resistance to Corrosion)	-	301000	-
Cl 7.7(Tapping Test)	-	301000	-
Cl 7.8(Intermittent Discharge Test)	-	301000	-
Cl 7.8(Intermittent Discharge Test)	-	301000	-
Cl 8.1(Rating Suitability for the Various Classes of Fire)	-	301000	-
Cl 8.6(Electrical Conductivity of Extinguisher Discharge)	-	301000	-
Cl 9(CONSTRUCTION REQUIREMENTS)	-	301000	-
Cl 9.2.2(Burst Test)	-	301000	-
Cl 9.2.3(Crushing Test)	-	301000	-
Cl 9.2.4(Pressure Cycling Test)	-	301000	-
Cl 9.2.5(Welded Low Carbon Steel Cylinder)	-	301000	-
Cl 9.2.6(Stainless Steel Cylinders)	-	301000	-
Cl 9.2.7(Aluminium Cylinders)	-	301000	-
Cl 9.3(Carrying Handle)	-	301000	-
Cl 9.4(Mounting)	-	301000	-
Cl 9.5(Caps, Valves and Closures)	-	301000	-
Cl 9.7.1(Requirements for Plastics Components)	-	301000	-
Cl 9.7.2(Requirements for Plastics Components)	-	301000	-
Cl 9.7.3(Requirements for Plastics Components)	-	301000	-
Cl 9.8(Hose Assemblies)	-	301000	-
Cl 9.8(Hose Assemblies)	-	301000	-
Cl 9.9 - Table 10(Method of Operation)	-	301000	-
Cl 9.10(Safety-Locking Devices)	-	301000	-
Cl 9.11.1(Requirements for Pressure Gauges and Indicators for Low-Pressure Extinguishers)	-	301000	-
Cl 9.11.2(Calibration Test - Gauges and Indicators)	-	301000	-
Cl 9.11.3(Burst Strength Test — Gauges and Indicators)	-	301000	-
Cl 9.11.4(Water Resistance Test — Gauges and Indicators)	-	301000	-
Cl 9.12(Dip-Tubes and Filters — Water-Based Extinguishers)	-	301000	-
Cl 9.13(Horn Test for Carbon Dioxide (CO2) Extinguishers)	-	301000	-
Cl 9.14(Requirements for Extinguishants Filled in the Extinguisher)	-	301000	-
Cl 10(MARKING AND COLOUR)	-	301000	-
9.6(Safety Device)	-	301000	-
9.2.8(Composite Cylinder)	-	301000	-
9.2.7(Measure Thickness of the cylinder (Aluminium body))	-	301000	-
9.2.6.3 (Measure Thickness of the cylinder (S.S. Body))	-	301000	-
9.2.6.1 & 9.2.6.2 (Carbon composition of stainless steel cylinder)	-	301000	-
9.2.5.3, (Measure Thickness of the cylinder)	-	301000	-
9.2.5.1 & 9.2.5.2(Composition of welded low carbon steel cylinders)	-	301000	-
9.2.1.7(Construction requirement for the bottom of the extinguisher)	-	301000	-
9.2.1.6(Type of threads on parts made of plastic component joining metal parts)	-	301000	-
9.2.1.5(Cast Analysis Certifcate)	-	301000	-
9.2.1.4(Construction requirement of Neck Ring)	-	301000	-
9.2.1.3(Requirement of Welding)	-	301000	-
9.2.1.2(Construction requirement for stand vertically upright position)	-	301000	-
9.1(General Requirements of High Pressure Extinguisher)	-	301000	-
8.8(Electrical Conductivity of Extinguishers Discharge )	-	301000	-
8.1.5, 8.2.2(C) , 8.6, 8.7(Class F Splash Test)	-	301000	-
8.1.4 & 8.5(Class D Test fire)	-	301000	-
8.1.2, 8.2.2 b) & 8.4(Class B Fire Test)	-	301000	-
8.1.1, 8.2.2 a) & 8.3(Class A Fire Test)	-	301000	-
7.6.1(Internal Corrosion Test Test is applicable only for water based & clean agent PFEs)	-	301000	-
7.6.1(External Corrosion Test for all types of extinguishers)	-	301000	-
7.4.2(Leakage Test)	-	301000	-
7.4.1.(Retention of charge following partial discharge)	-	301000	-
6.2(Determination of Minimum Burst Pressure)	-	301000	-
6.1(Determination of Test Pressure)	-	301000	-
3.6 & 9.2.1.8(Determination of Maximum Service Pressure )	-	301000	-
3.5 & 9.2.1.1(Determination of Service Pressure )	-	301000	-
7.6.2(Internal Corrosion Test for Extinguishers Using Water-Based Medium and Clean Agent)	-	301000	-
9.14.1(Content of Mono Ammonium Phosphate)	-	301000	-
9.14.2(Content of Sodium Bicarbonate/Potassium Picarbonate for BC Powder)	-	301000	-
9.14.3(Surface Tension of Foam Solution)	-	301000	-
9.8.2(Requirement of hose and coupling system)	-	301000	-
9.8.3("Requirement of Burst Pressure of Hose fitted with shut-off nozzle ")	-	301000	-
9.8.3("Requirement of Burst Pressure of Hose fitted with shut-off nozzle for CO2 Fire Extinguisher")	-	301000	-
9.8.4(A hose assembly without a shut-off nozzle shall be capable of withstanding, without leakage, a pressure equal to the extinguisher test pressure i.e Max (1.43 × Pms , 35 bar) held for at least 30 seconds.)	-	301000	-
9.10.2(Requirement of safety device material)	-	301000	-
9.10.3, 9.10.4, 9.10.5 & 9.10.6(Requirement of safety-locking pin or other device)	-	301000	-

08 Feb, 2027

-
-

Bureau of Indian Standards

The National Standards Body of India

Atmy Analytical Labs Private Limited (Unit-2), Greater Noida

B-19, Ecotech,-1 Extension, Kasna, Greater Noida, Gautam Buddha Nagar, Uttar Pradesh, 201310

9910808996 unit2@atmylabs.com

Scope List