BIS - LIMS (Laboratory Information Management System)

Advance Firetec and Research Lab Pvt. Ltd

B-3, 2nd floor, Mangolpuri Industrial Area, Phase 2, New Delhi, New Delhi, South West, Delhi, 110034

9971032375 aftrlab24@gmail.com

Scope List

Reset

36 Results

S.No.

Indian Standard No.

Product

Exclusion

Testing Charges (Excl. Of Taxes)

Facility Type

Effective Date

Validity Date

Remark

IS 2347 (2023)

DOMESTIC PRESSURE COOKER ï¿½ SPECIFICATION

44200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Gross capacity)	-	100	-
4.2(Body Capacity)	-	100	-
6(Construction)	-	6600	CL 6- RS 100, CL 6.1 -RS 100, Cl6.1.1 -RS 100, CL 6.1.2 -RS 100, CL 6.1.3 -RS 100, CL 6.1.4 -RS 100, CL 6.1.5-RS 100, Cl6.2 -RS 100, CL6.2.1 -RS 100, CL6.2.2- RS 100, CL 6.3.1 -RS 2000, CL 6.3.2 -RS 3000, CL 6.3.3-RS 3000, CL 6.4 .1 .1-RS 100,CL 6.4.2-500
7(Workmanship and Finish )	-	300	CL 7.1 RS 200, Cl 7.2 - RS 100
8.1(Air Pressure Test )	-	2000	-
8.2(Proof Pressure Test )	-	2000	-
8.3(Operating Test for Pressure Regulating Device )	-	2000	-
8.4(Test for Safety Relief Device )	-	2000	-
8.5(Bursting Pressure Test )	-	4000	-
8.6(Test for Removal of Lid under Pressure )	-	3000	CL 8.6.1 - RS 1500, Cl. 8.6.2 - RS 1500
8.7(Test for Spring Loaded Mechanism )	-	2000	-
8.9(Aluminium induction compatible Base )	-	2000	-
8.1(Handles of cooker )	-	8000	-
8.8(Composite Cooker Base )	-	2500	-
8.14(Ply construction cooker Body )	-	1500	-
8.15.1(Fragmentation Test )	-	500	-
8.15.2(Ball Drop Test )	-	500	-
8.15.3(Thermal Shock Test )	-	800	-
8.15.4(Free Fall Test)	-	500	-
8.17(Test for Effectiveness for Induction Bottom)	-	1500	-
11(Marking )	-	0	-
12(Packing )	-	0	-
4(Capacity)	-	100	-
4.2(Body Capacity)	-	100	-
6(CONSTRUCTION)	-	100	-
6.1(Pressure Regulating Device)	-	100	-
6.1.1(Pressure Regulating Device)	-	100	-
6.1.1(Minimum Inside diameter of Vent Pipe.)	-	100	-
6.1.2(Pressure Regulating Device)	-	100	-
6.1.3(Pressure Regulating Device)	-	100	-
6.1.4(Pressure Regulating Device)	-	100	-
6.1.5(Pressure Regulating Device)	-	100	-
6.1.6(Pressure Regulating Device)	-	100	-
6.2(Safety Relief Device)	-	100	-
6.2.1(Safety Relief Device)	-	100	-
6.2.2(Safety Relief Device)	-	100	-
6.2.3(Safety Relief Device)	-	0	-
6.3.1(Temperature Responsive Safety Relief Device)	-	2000	-
6.3.2(Temperature Responsive Safety Relief Device)	-	3000	-
6.3.3(Temperature Responsive Safety Relief Device)	-	3000	-
6.4.1.1(Handles and Knobs)	-	100	-
6.4.2(Handles and Knobs)	-	500	-
6.7(Internal Level Marking)	-	100	-
6.8(Internal Level Marking)	-	100	-
7.1(WORKMANSHIP AND FINISH)	-	200	-
7.2(WORKMANSHIP AND FINISH)	-	100	-
8.17(Test for Effectiveness for Induction Bottom)	-	1500	-
8.16(PRD with chain)	-	500	-
8.15.4.2(Glass lid without rim)	-	250	-
8.15.4.1("Free Fall Test ( Glass lid with rim) ")	-	250	-
8.15.3(Thermal Shock Test on Tempered Glass lid)	-	800	-
8.15.2(Ball Drop Test on Tempered Glass lid)	-	500	-
8.15.1(Fragmentation Test on Tempered Glass lid)	-	500	-
8.14(3 ply construction cooker body)	-	1500	-
8.1(Air Pressure Test)	-	2000	-
8.2(Proof Pressure Test)	-	2000	-
8.3.1(Operating Test for Pressure Regulating Device)	-	2000	-
8.4.1(Test for Safety Relief Device)	-	1000	-
8.4.2(Test for Safety Relief Device)	-	1000	-
8.4.2 NOTE(Test for Safety Relief Device)	-	0	-
8.5(Bursting Pressure Test)	-	4000	-
8.6.1(Tests for Removal of Lid under Pressure For Outer Lid Cooker)	-	1500	-
8.6.2(Tests for Removal of Lid under Pressure For inner Lid Cooker)	-	1500	-
8.6.3(Tests for Removal of Lid under Pressure: For Cooker Fastened by Screw Clamps or Any Other Locking Device)	-	1000	-
8.7(Test for Spring Loaded Mechanism)	-	2000	-
8.8(Test for stainless steel cookers)	-	2500	-
8.9("For stainless steel, aluminium induction compatible base and 3 ply cooker")	-	2000	-
8.10(Testing of Handles of the cooker)	-	8000	-
8.10 Note 4(Testing of Handles of the cooker)	-	200	-
8.10 Note 5(Testing of Handles of the cooker)	-	200	-
8.10 Note 6(Testing of Handles of the cooker)	-	200	-

Complete

IS 9972 (2002)

Specification for automatic sprinkler heads for fire protection service (First Revision)

95500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 5.1(Orfice size)	-	1500	Cl 5.1.1 - RS 500, Cl 5.1.2 - RS 500, Cl.5.1.3 - RS 500
Cl 5.2(Nominal Release Temperatures and Colour coding)	-	500	Cl. 5.2.1 - RS 500, CL.5.2.2 - RS 500 Test conducted up to release temperature 141C.
Cl 6(PERFORMANCE TESTS)	-	0	-
Cl 6.1(Examination of Sprinklers)	-	500	-
Cl 6.2(Leak Resistance Test)	-	5000	CL 6.2.1 - RS 2000, CL.6.2.2 -RS 3000,
Cl 6.3(Functional Test)	-	2000	-
Cl 6.4(Release Temperature Test (Operating Temperature))	-	2000	-
Cl 6.5(Heat Exposure Test (For Glass Bulb Sprinklers))	-	2000	-
Cl 6.6(High Ambient Temperature (Ageing) Test for All Sprinklers)	-	12000	-
Cl 6.7(Thermal Shock Test (for Glass Bulb Sprinklers))	-	3000	-
Cl 6.8(Strength of Heat Sensitive Element Test)	-	2000	-
Cl 6.9(Service Load Measurement)	-	2000	-
Cl 6.10(Strength of Frame Test)	-	2000	-
Cl 6.11(Deflector Strength Test)	-	2000	-
Cl 6.12(Water Flow Test)	-	4000	Cl.6.12.1 - RS 2000, CL6.12.2 -RS 2000
Cl 6.13(Water Distribution Test)	-	5000	-
Cl 6.14(Water Hammer Test)	-	5000	-
Cl 6.16(Calibration Test)	-	5000	-
Cl 6.17(Corrosion Tests)	-	10000	Cl 6.17.1 -RS 5000, CL6.17.2 - RS 5000
Cl 6.18(Stress Corrosion Cracking Test)	-	10000	Cl 6.18.1 -RS 5000, CL6.18.2 - RS 5000
Cl 6.19(Determination of Time Constant)	-	5000	-
Cl 7(DETERMINATION OF OF AUTOMATIC SPRINKLER HEAT SENSITIVITY)	-	10000	Cl 7.2.1 - RS 5000 CL7.2.2 - RS 5000
Cl 7(DETERMINATION OF OF AUTOMATIC SPRINKLER HEAT SENSITIVITY)	-	10000	-
Cl 6.19(Determination of Time Constant)	-	5000	-
Cl 6.18(Stress Corrosion Cracking Test)	-	10000	-
Cl 6.17(Corrosion Tests)	-	10000	-
Cl 6.16(Calibration Test)	-	5000	-
Cl 6.15(Vibration Test)	-	5000	-
Cl 6.14(Water Hammer Test)	-	5000	-
Cl 6.13(Water Distribution Test)	-	5000	-
Cl 6.12(Water Flow Test)	-	4000	-
Cl 6.11(Deflector Strength Test)	-	2000	-
Cl 6.10(Strength of Frame Test)	-	2000	-
Cl 6.9(Service Load Measurement)	-	2000	-
Cl 6.8(Strength of Heat Sensitive Element Test)	-	2000	-
Cl 6.7(Thermal Shock Test (for Glass Bulb Sprinklers))	-	3000	-
Cl 6.6(High Ambient Temperature (Ageing) Test for All Sprinklers)	-	12000	-
Cl 6.5(Heat Exposure Test (For Glass Bulb Sprinklers))	-	2000	-
Cl 6.4(Release Temperature Test (Operating Temperature))	-	2000	-
Cl 6.3(Functional Test)	-	2000	-
Cl 6.2(Leak Resistance Test)	-	5000	-
Cl 6.1(Examination of Sprinklers)	-	500	-
Cl 6(PERFORMANCE TESTS)	-	0	-
Cl 5.2(Nominal Release Temperatures and Colour coding)	-	500	-
Cl 5.1(Orfice size)	-	1500	-
Cl 7(DETERMINATION OF OF AUTOMATIC SPRINKLER HEAT SENSITIVITY)	-	10000	-
Cl 6.19(Determination of Time Constant)	-	5000	-
Cl 6.18(Stress Corrosion Cracking Test)	-	10000	-
Cl 6.17(Corrosion Tests)	-	10000	-
Cl 6.16(Calibration Test)	-	5000	-
Cl 6.15(Vibration Test)	-	5000	-
Cl 6.14(Water Hammer Test)	-	5000	-
Cl 6.13(Water Distribution Test)	-	5000	-
Cl 6.12(Water Flow Test)	-	4000	-
Cl 6.11(Deflector Strength Test)	-	2000	-
Cl 6.10(Strength of Frame Test)	-	2000	-
Cl 6.9(Service Load Measurement)	-	2000	-
Cl 6.8(Strength of Heat Sensitive Element Test)	-	2000	-
Cl 6.7(Thermal Shock Test (for Glass Bulb Sprinklers))	-	3000	-
Cl 6.6(High Ambient Temperature (Ageing) Test for All Sprinklers)	-	12000	-
Cl 6.5(Heat Exposure Test (For Glass Bulb Sprinklers))	-	2000	-
Cl 6.4(Release Temperature Test (Operating Temperature))	-	2000	-
Cl 6.3(Functional Test)	-	2000	-
Cl 6.2(Leak Resistance Test)	-	5000	-
Cl 6.1(Examination of Sprinklers)	-	500	-
Cl 5.1(Orfice size)	-	1500	-
Cl 6.15(Vibration Test)	-	5000	-
Cl 6(PERFORMANCE TESTS)	-	0	-

Complete

IS 905 (1980)

Specification for delivery breechings, dividing and collecting, instantaneous pattern, for fire fighting purposes (Second Revision)

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1 (a)(Dividing)	-	500	-
4.1 (b)(Collecting)	-	500	-
4.2(Dimensions)	-	6500	-
5(Finish)	-	2000	-
6.1(Hydraulic Test)	-	6000	-
7(Marking)	-	0	-

Complete

IS 927 (1981)

Specification for fire hooks (Second Revision)

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
2.2(Handle)	-	1000	-
3(Shape Dimensions )	-	3000	-
4(Workmanship and Finish)	-	1000	-
5(Performance Test Requirement)	-	5000	-
6(Marking)	-	0	-

Complete

IS 908 (1975)

Specification for fire hydrant, stand post type (Second Revision)

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
2(General Requirements)	-	3000	-
4(Workmanship and Finish)	-	1000	-
5(Hydrostatic Test Requirement)	-	5000	-
6(Coating)	-	2500	-
7(Painting)	-	500	-
9(Marking)	-	0	-

Complete

IS 901 (1988)

Specification for couplings, double male and double female instantaneous pattern for fire fighting (Third Revision)

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(Dimension)	-	1000	-
4(Hydraulic Test Requirement)	-	4000	-
5(Workmanship and Finish)	-	1000	-
6(Marking)	-	0	-

Complete

IS 902 (1992)

Suction hose couplings for fire fighting purposes - Specification (Third Revision)

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.0(Shape and Dimension)	-	6000	-
5.0(Construction)	-	1000	-
5.2(Round Threads for Male Coupling and Nut)	-	1000	-
5.3(V Thread for Locking Ring and Nut)	-	1000	-
7.0(Workmanship and Finish)	-	1000	-
8.0(Performance Requirements)	-	5000	-

Complete

IS 906 (1988)

Specification for revolving branch pipe for fire fighting (Third Revision)

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Dimension and Construction)	-	7000	-
5(Finish)	-	2000	-
6(Performance Requirements)	-	6000	-
7(Marking)	-	0	-

Complete

IS 8096 (1992)

Fire beaters - Specification (First Revision)

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Component)	-	2000	-
5(Assembling)	-	1000	-
6(Workmanship)	-	1000	-
7(General Requirements)	-	3000	-
8(Testing)	-	3000	-
8(Testing)	-	3000	-
9(Marking)	-	0	-

Complete

IS 5714 (1981)

Specification for hydrant stand - Pipe for fire fighting (First Revision)

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Types and Dimensions)	-	6000	-
5(Finish)	-	3000	-
6.1(Hydrostatic Pressure Test)	-	6000	-
7(Marking)	-	0	-

Complete

IS 4927 (1992)

Unlined flax canvas hose for fire fighting - Specification (First Revision)

20000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(Materials)	-	3000	-
11(Hydrostatic Bursting Pressure Test)	-	3000	-
9.2(Change in size (Increase in Outer Diameter))	-	1500	-
9.1(Change in size (Increase in Length))	-	1500	-
10(Hydrostatic Proof Pressure Test)	-	3000	-
Cl. 8.1, Annexure B & Table 1(Percolation Test)	-	3000	-
Cl. 8.1, Annexure B & Table 1(Percolation Test)	-	3000	-
Cl. 8.1, Annexure B & Table 1(Percolation Test)	-	3000	-
Cl. 8.1, Annexure B & Table 1(Percolation Test)	-	3000	-
7.1(Coil Diameter (Flexibility))	-	1000	-
6.1(Average mass per meter)	-	1000	-
6.1(Average mass per meter)	-	1000	-
6.1(Average mass per meter)	-	1000	-
6.1(Average mass per meter)	-	1000	-
5(Length)	-	1000	-
4(Internal diameter of hose)	-	2000	-

Complete

IS 2546 (1974)

Specification for galvanized mild steel fire bucket (First Revision)

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 6(Leakage Test)	-	3000	-
Cl 5(Workmanship)	-	2000	-
Cl 4(Body, Bottom, Ears, Top Handle & Bottom Handle)	-	3000	-
Cl 3.1(Body, Ear & Handle)	-	7000	-
Cl 3(Figure)	-	7000	-

Complete

IS 2653 (2004)

Safety matches in boxes - Specification (Third Revision)

3050 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1.1(Contents)	-	100	-
5.1.2.1(Matchboxes)	-	100	-
5.1.2.2(Matchboxes)	-	100	-
5.1.3(Envelopment)	-	100	-
5.1.4(Ease of Opening)	-	100	-
5.1.5(Retention of Contents)	-	100	-
5.1.6.1(Defective Match Boxes)	-	25	-
5.1.6.2(Defective Match Boxes)	-	25	-
5.2.1.1(Match Splints)	-	100	-
5.2.1.2(Match Splints)	-	100	-
5.2.1.2(Minimum thickness)	-	50	-
5.2.1.2(Average thickness)	-	50	-
5.2.2(Unserviceable Sticks)	-	500	Unserviceable - RS 100, Badly-distorted heads - RS 100, Fractured Heads - RS 100, Double -RS100, Broken/Bent match sticks - 100
5.3(Match Boxes)	-	50	-
6.1.1(Striking Performance - General)	-	200	-
6.1.1(Striking Performance - General)	-	200	-
6.1.1(Striking Performance - General)	-	200	-
6.1.1(Striking Performance - General)	-	200	-
6.1.1(Striking Performance - General)	-	200	-
6.1.2(Safety Matches)	-	100	-
6.2(Ignition Below 170 ˚C)	-	350	-
6.3(Ignition Under Impact)	-	400	-
6.4.1(Durability of the Striking Surface)	-	100	-
6.4.2(Ignition of the Striking Surface)	-	100	-
6.4.3(Loss of Burning Fragments)	-	100	-
6.5(Damp Proofness for Match Boxes)	-	300	-

Complete

IS 3549 (2017)

Rubber hoses and hose assemblies for water suction and discharge - Specification (Second Revision)

38800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 8.2.7 & Table 4(Ozone resistance of the cover)	-	12500	-
Cl 8.2.6 & Table 4(Adhesion)	-	1000	-
Cl 8.2.5 & Table 4(Low-temperature flexibility)	-	5000	-
Cl 8.2.4 & Table 4(Resistance to suction flattening)	-	2000	-
Cl 8.2.3 & Table 3(Resistance to bending (minimum bend radius as a function of nominal size))	-	1000	-
Cl 8.2.2 & Table 2(When tested by the method specified in ISO 1402, hoses shall meet the requirements of Table 2.)	-	2000	-
Cl 8.2.1 & Table 4(Variation in length at max. working pressure)	-	2000	Change in length - RS 1000, Change in Diameter - RS 1000
Cl 8.2.1 & Table 2(Hydrostatic-pressure requirements (proof pressure test))	-	2000	-
Cl 8.1.3 & Table 1(Resistance to ageing-Change in elongation at break from original value (max.) )	-	1500	-
Cl 8.1.3 & Table 1(Resistance to ageing-Change in elongation at break from original value (max.) )	-	1500	-
Cl 8.1.3 & Table 1(Resistance to ageing-Change in tensile strength from original value (max.))	-	1500	-
Cl 8.1.3 & Table 1(Resistance to ageing-Change in tensile strength from original value (max.))	-	1500	-
Cl 8.1.2 & Table 1(Elongation at break, min.)	-	1000	-
Cl 8.1.2 & Table 1(Elongation at break, min.)	-	1000	-
Cl 8.1.2 & Table 1(Tensile strength, min.)	-	1000	-
Cl 8.1.2 & Table 1(Tensile strength, min.)	-	1000	-
Cl 7.5(Cover)	-	100	-
Cl 7.4 & Table 4(Lining)	-	100	-
Cl 7.3(Unit lengths)	-	200	-
Cl 7.2(Enlarged ends)	-	200	-
Cl 7.1 & Table 3(Bore (inside diameter))	-	200	-
Cl 6.3(Cover)	-	100	-
Cl 6.2(Reinforcement)	-	100	-
Cl 6.1(Lining)	-	100	-
Cl 5(Couplings and end fittings)	-	0	-
Cl 4(Classification)	-	200	-

Complete

IS 446 (2017)

Rubber hoses, textile - Reinforced, for compressed air - Specification (Fifth Revision)

39900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.2, Table 3(Low temperature Flexibility)	-	5000	-
7.2, Table 3(Flexibility at 23°C)	-	1000	-
7.2, Table 3(Ozone Resistance)	-	12500	-
7.2, Table 3(Adhesion between Components- Cover and Reinforcement)	-	1000	-
7.2, Table 3(Adhesion between Components- Reinforcement layers)	-	1000	-
7.2, Table 3(Adhesion between Components- Lining and Reinforcement)	-	1000	-
7.2, Table 3(Minimum Bursting Pressure for type 3)	-	2000	-
7.2, Table 3(Minimum Bursting Pressure for type 2)	-	2000	-
7.2, Table 3(Minimum Bursting Pressure for type 1)	-	2000	-
7.2, Table 3(Change in Diameeter at Maximum working Pressure)	-	1000	-
7.2, Table 3(Change in Length at Maximum working Pressure)	-	1000	-
7.2, Table 3(Proof Pressure at 23°C for type 3)	-	2000	-
7.2, Table 3(Proof Pressure at 23°C for type 2)	-	2000	-
7.2, Table 3(Proof Pressure at 23°C for type 1)	-	2000	-
7.1, Table 2(Resistance to Liquid , Increase in Volume (Class C only)-Cover)	-	1500	-
7.1, Table 2(Resistance to Liquid , Increase in Volume (Class C only)-Lining)	-	1500	-
7.1, Table 2(Resistance to Liquid , Increase in Volume (Class B only)-Lining)	-	1500	-
7.1, Table 2(Accelerated Ageing for all types: Change in Elongation of Cover of its original value)	-	1500	-
7.1, Table 2(Accelerated Ageing for all types: Change in Elongation of Lining of its original value)	-	1500	-
7.1, Table 2(Accelerated Ageing for all types: Change in Tensile Strength of Cover of its original value)	-	1500	-
7.1, Table 2(Accelerated Ageing for all types: Change in Tensile Strength of Lining of its original value)	-	1500	-
7.1, Table 2(Elongation at Break of Cover of all types)	-	1000	-
7.1, Table 2(Elongation at Break of Lining of all types)	-	1000	-
7.1, Table 2(Tensile Strength of Cover)	-	1000	-
7.1, Table 2(Tensile Strength of Lining)	-	1000	-
6, Dimensions(Thickness of Cover of Type 3)	-	200	-
6, Dimensions(Thickness of Cover of Type 2)	-	200	-
6, Dimensions(Thickness of Cover of Type 1)	-	200	-
6, Dimensions(Thickness of Lining of Type 3)	-	200	-
6, Dimensions(Thickness of Lining of Type 2)	-	200	-
6, Dimensions(Thickness of Lining of Type 1)	-	200	-
6, Dimensions(Tolerance on Length)	-	200	-
6, Dimensions(Concentricity)	-	300	-
6, Dimensions(Internal Diameter)	-	200	-
5(Material and Construction)	-	300	-
Cl 7.2 & Table 3(Low-temperature flexibility)	-	5000	-
Cl 7.2 & Table 3(Flexibility at 23 °C)	-	1000	-
Cl 7.2 & Table 3(Ozone resistance)	-	12500	-
Cl 7.2 & Table 3(Adhesion between components)	-	1000	-
Cl 7.2 & Table 3(Minimum burst pressure)	-	2000	-
Cl 7.2 & Table 3(Minimum burst pressure)	-	2000	-
Cl 7.2 & Table 3(Minimum burst pressure)	-	2000	-
Cl 7.2 & Table 3(Change in diameter at maximum working pressure)	-	1000	-
Cl 7.2 & Table 3(Change in length at maximum working pressure)	-	1000	-
Cl 7.2 & Table 3(Proof pressure)	-	2000	-
Cl 7.2 & Table 3(Proof pressure)	-	2000	-
Cl 7.2 & Table 3(Proof pressure)	-	2000	-
Cl 7.1 & Table 2(Resistance to liquids-Increase in volume (max.) (class C only) )	-	1500	-
Cl 7.1 & Table 2(Resistance to liquids-Increase in volume (max.) (class C only) )	-	1500	-
Cl 7.1 & Table 2(Resistance to liquids-Increase in volume (max.) (class B only) )	-	1500	-
Cl 7.1 & Table 2(Resistance to liquids-Increase in volume (max.) (class B only) )	-	1500	-
Cl 7.1 & Table 2(Resistance to liquids-Increase in volume (class A))	-	1500	-
Cl 7.1 & Table 2(Resistance to liquids-Increase in volume (class A))	-	1500	-
Cl 7.1 & Table 2(Resistance to ageing-Change in elongation at break from original value (max.) original value (max.) )	-	1500	-
Cl 7.1 & Table 2(Resistance to ageing-Change in elongation at break from original value (max.) original value (max.) )	-	1500	-
Cl 7.1 & Table 2(Resistance to ageing-Change in tensile strength from original value (max.) )	-	1500	-
Cl 7.1 & Table 2(Resistance to ageing-Change in tensile strength from original value (max.) )	-	1500	-
Cl 7.1 & Table 2(Minimum elongation at break)	-	1000	-
Cl 7.1 & Table 2(Minimum elongation at break)	-	1000	-
Cl 7.1 & Table 2(Minimum tensile strength)	-	1000	-
Cl 7.1 & Table 2(Minimum tensile strength)	-	1000	-
Cl 6.4(Minimum thickness of lining and cover-Type 3)	-	200	-
Cl 6.4(Minimum thickness of lining and cover-Type 3)	-	200	-
Cl 6.4(Minimum thickness of lining and cover-Type 2 )	-	200	-
Cl 6.4(Minimum thickness of lining and cover-Type 2 )	-	200	-
Cl 6.4(Minimum thickness of lining and cover-Type 1 )	-	200	-
Cl 6.4(Minimum thickness of lining and cover-Type 1 )	-	200	-
Cl 6.3(Tolerance on length)	-	200	-
Cl 6.2(Concentricity)	-	300	-
Cl 6.1 & Table 1(Internal diameters and tolerances)	-	200	-
Cl 5(Materials and construction)	-	300	-
Cl 5(Materials and construction)	-	300	-
Cl 4(Classification)	-	200	-
Cl 4(Classification)	-	200	-
Cl 4(Classification)	-	200	-

Complete

IS 444 (2017)

Rubber hoses, textile - Reinforced, for general - Purpose water applications - Specification (Fifth Revision)

35900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Classification - IS 444)	-	200	-
5(Lining - IS 444)	-	100	-
5(Reinforcement - IS 444)	-	100	-
5(Cover - IS 444)	-	100	-
5(Lining and Cover - IS 444)	-	300	-
6.1- Table 1(Internal diameters - ISO 4671)	-	200	-
6.2(Concentricity - ISO 4671)	-	300	-
6.3(Length -IS 4671)	-	200	-
6.4( thickness of the lining plus cover - ISO 4671)	-	200	-
6.4(If the cover is fluted, the depth of the flutes - ISO 4671)	-	200	-
7.1 - Table 2( tensile strength of Lining - ISO 37 )	-	1000	-
7.1 - Table 2( tensile strength of Cover - ISO 37 )	-	1000	-
7.1 - Table 2(elongation at break of Lining - ISO 37)	-	1000	-
7.1 - Table 2(elongation at break of Cover - ISO 37)	-	1000	-
7.1 - Table 2(Change in tensile strength of Lining from original value after ageing(max) - ISO 188 and ISO 37)	-	1500	-
7.1 - Table 2(Change in tensile strength of Cover from original value after ageing(max) - ISO 188 and ISO 37)	-	1500	-
7.1 - Table 2(Change in elongation at break of Lining from original value after ageing (max.) - ISO 188 and ISO 37)	-	1500	-
7.1 - Table 2(Change in elongation at break of Cover from original value after ageing (max.) - ISO 188 and ISO 37)	-	1500	-
7.2 - Table 3(Proof pressure at 23 °C - ISO 1402)	-	2000	-
7.2 - Table 3(Change in length at proof pressure - ISO 1402)	-	1000	-
7.2 - Table 3(Minimum burst pressure - ISO 1402)	-	2000	-
7.2 - Table 3(Adhesion between components - ISO 8033)	-	1000	-
7.2 - Table 3(Ozone resistance - ISO 7326)	-	12500	-
7.2 - Table 3(Flexibility at 23 °C - Method A of ISO 1746)	-	1000	-
7.2 - Table 3(Low-temperature flexibility - Method B of ISO 4672)	-	5000	-

Complete

IS 926 (1985)

Specification For Fireman's Axe

20000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
2.1(General)	-	0	-
4.1(Shape, Dimension & Construction)	-	2500	-
4.2(Shape, Dimension & Construction)	-	500	-
4.3(Shape, Dimension & Construction)	-	2000	-
5.1(Workmanship and Finish)	-	1000	-
6.2(Performance Test (Load))	-	2000	-
6.1(Cutting Edge)	-	2000	-
6.3(Insulated Handle)	-	10000	-

Complete

IS 952 (2012)

Fog nozzle for fire brigade use - Specification (Second Revision)

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.0(Shape and Dimension)	-	3000	-
5.0(Performance Requirements)	-	5000	-
5.2.2(Hydraulic Pressure Test)	-	3000	-
6.0(Workmanship and Finish)	-	500	-
4.1(Shape and Dimension)	-	3000	-
5.1(Performance Test (Water Flow Rate of Fog Nozzle Head))	-	5000	-
5.1(Performance Test (Water Flow Rate of Jet Head))	-	5000	-
5.2(Type of fog)	-	500	-
5.2.1(Angle of cone of fog)	-	500	-
5.2.2(Hydraulic Pressure Test)	-	3000	-
5.3(Horizontal reach of the fog)	-	1500	-
6(Workmanship)	-	500	-
6(Anticorrosive treatment)	-	1000	-
4.1(Shape and Dimension)	-	3000	-
5.1(Performance Test (Water Flow Rate of Fog Nozzle Head))	-	5000	-
5.1(Performance Test (Water Flow Rate of Jet Head))	-	5000	-
5.2(Type of fog)	-	500	-
5.2.1(Angle of cone of fog)	-	500	-
5.2.2(Hydraulic Pressure Test)	-	3000	-
5.3(Horizontal reach of the fog)	-	1500	-
6(Workmanship)	-	500	-
6(Anticorrosive treatment)	-	1000	-

Complete

IS 5290 (1993)

Landing valves - Specification (Third Revision)

20000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5, 5.1 (a) fig-1, type A(Types AND DIMENSIONS)	-	1000	-
5, 5.1 (b) fig-2, type B(Types AND DIMENSIONS)	-	1000	-
5.2(Types AND DIMENSIONS)	-	6000	-
7, 7.2(hydrostatics pressure tests)	-	2000	-
6, 6.1(Finish)	-	500	-
6, 6.2(Finish)	-	500	-
7, 7.1(7 PERFORMANCE REQUIREMENTS, Water Tightness Test for the Valve)	-	2000	-
7, 7.3(Flow test, pressure 7 kgf/cm2)	-	8000	-
4.4(Marking)	-	0	-

Complete

IS 2871 (2012)

Branch pipe, universal for fire fighting purpose - Specification (Second Revision)

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 4(Shape & Dimensions)	-	5000	-
Cl 5(Workmanship & finish)	-	2000	-
Cl 6.1(Hydraulic Test)	-	4000	-
Cl 6.2(Operational Test)	-	4000	-
Cl 6.2(Operational Test)	-	4000	-
Cl 6.1(Hydraulic Test)	-	4000	-
Cl 5(Workmanship & finish)	-	2000	-
Cl 4(Shape & Dimensions)	-	5000	-
Cl 6.2(Operational Test)	-	4000	-
Cl 6.1(Hydraulic Test)	-	4000	-
Cl 5(Workmanship & finish)	-	2000	-
Cl 4(Shape & Dimensions)	-	5000	-

Complete

IS 2097 (2012)

Foam making branch pipe and foam inductor - Specification (Second Revision)

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1 - Table 1(PERFORMANCE REQUIREMENTS-The foam making branches shall conform to the performance requirements given below 1.Pressure )	-	1500	-
6.1 - Table 1(2. Discharge Capacity(Water))	-	2000	-
6.1 - Table 1(3. Foam)	-	2000	-
6.1 - Table 1(4. Throw)	-	2000	-
6.1 - Table 1(5. Expansion)	-	2000	-
7.1(MARKING-The foam making branches shall be clearly and permanently marked with the following information:)	-	500	-
3.1(Type)	-	0	-
3.1(Functional Components in FB 5X)	-	0	-
3.1(Functional Components in FB 10X)	-	0	-
3.1(Functional Components in FB 20X)	-	0	-
Table 1 & Cl. 4(Water discharge capacity)	-	2000	-
Table 1 & Cl. 4(Water discharge capacity)	-	2000	-
Table 1 & Cl. 4(Water discharge capacity)	-	2000	-
Cl. 6.1 & Table 1(Throw of the Foam Jet)	-	2000	-
Cl. 6.1 & Table 1(Throw of the Foam Jet)	-	2000	-
Cl. 6.1 & Table 1(Throw of the Foam Jet)	-	2000	-
Cl. 6.2 & Table 1(Expansion ratio & 25% drainage time of the produced foam)	-	2000	-
Cl. 6.2 & Table 1(Expansion ratio & 25% drainage time of the produced foam)	-	2000	-
Cl. 6.2 & Table 1(Expansion ratio & 25% drainage time of the produced foam)	-	2000	-
3.1(Type)	-	0	-
3.1(Functional Components in FB 5X)	-	0	-
3.1(Functional Components in FB 10X)	-	0	-
3.1(Functional Components in FB 20X)	-	0	-
Table 1 & Cl. 4(Water discharge capacity)	-	2000	-
Table 1 & Cl. 4(Water discharge capacity)	-	2000	-
Table 1 & Cl. 4(Water discharge capacity)	-	2000	-
Cl. 6.1 & Table 1(Throw of the Foam Jet)	-	2000	-
Cl. 6.1 & Table 1(Throw of the Foam Jet)	-	2000	-
Cl. 6.2 & Table 1(Expansion ratio & 25% drainage time of the produced foam)	-	2000	-
Cl. 6.2 & Table 1(Expansion ratio & 25% drainage time of the produced foam)	-	2000	-

Complete

IS 2925 (1984)

Specification for industrial safety helmets (Second Revision)

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(Shell)	-	300	-
3.2(Harness)	-	300	-
3.3(Metal Parts)	-	1000	-
4.1(Sizes)	-	200	-
5.1(Shell)	-	300	-
5.2(Harness)	-	600	-
5.3(Chin Strap or Nape Strap)	-	300	-
5.4(Lamp Bracket)	-	300	-
5.5(Cable Clip)	-	300	-
6.1(Workmanship & Finish)	-	200	-
7.1(Mass)	-	200	-
8.1(Shock Absorption Resistance)	-	1700	-
8.2(Penetration Resistance)	-	500	-
8.3(Flamability Resistance)	-	500	-
8.4(Electrical Resistance)	-	2000	-
8.5(Water Absorption)	-	500	-
8.6(Heat Resistance)	-	800	-
3.1(Shell)	-	300	-
3.2(Harness)	-	300	-
3.3(Metal Parts)	-	1000	-
4.1(Sizes)	-	200	-
5.1(Shell)	-	300	-
5.2(Harness)	-	600	-
5.3(Chin Strap or Nape Strap)	-	300	-
5.4(Lamp Bracket)	-	300	-
5.5(Cable Clip)	-	300	-
6.1(Workmanship & Finish)	-	200	-
7.1(Mass)	-	200	-
8.1(Shock Absorption Resistance)	-	1700	-
8.2(Penetration Resistance)	-	500	-
8.3(Flamability Resistance)	-	500	-
8.4(Electrical Resistance)	-	2000	-
8.5(Water Absorption)	-	500	-
8.6(Heat Resistance)	-	800	-
5.2.1(Head Band)	-	300	-
5.3.1(Chin Strap)	-	150	-
5.3.2(Nape Strap)	-	150	-

Complete

IS 8090 (1976)

Specification for couplings, branch pipe, nozzle used in hose reel tubing for fire fighting

20000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(Tolerances)	-	0	-
4(Workmanship and Finish)	-	1500	-
5.1(Construction)	-	1000	-
5.3(Hydraulic test requirement)	-	3000	-
6.1(Dimensions)	-	3000	-
6.2(Construction)	-	1000	-
6.3(Hydraulic test requirement)	-	3000	-
7.1(Dimensions)	-	3000	-
7.2(Construction)	-	1000	-
7.3(Hydraulic requirement test)	-	3000	-
9(Marking)	-	500	-

Complete

IS 884 (1985)

Apecification for first - Aid hose - Reel for fire fighting (First Revision)

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 5.1(Dimensions)	-	1500	-
Cl 5.1(Dimensions)	-	1500	-
Cl 5.1(Dimensions)	-	1500	-
Cl 5.1(Dimensions)	-	1500	-
Cl 5.1(Dimensions)	-	1500	-
Cl 5.1(Dimensions)	-	1500	-
Cl 5.1(Dimensions)	-	1500	-
Cl 5.1(Dimensions)	-	1500	-
Cl 5.2(Resistance to Leakage)	-	2000	-
Cl 5.3(Strength)	-	2500	-
Cl 5.3(Strength)	-	2500	-
Cl 5.4(Range & Water Flow Rate)	-	4500	-
Cl 5.5(Swinging)	-	500	-
Cl 5.6(Reel Action)	-	500	-
Cl 6(Workmanship)	-	500	-
Cl 7(Painting)	-	500	-
Cl 5.1(Dimensions)	-	1500	-
Cl 5.1(Dimensions)	-	1500	-
Cl 5.1(Dimensions)	-	1500	-
Cl 5.1(Dimensions)	-	1500	-
Cl 5.1(Dimensions)	-	1500	-
Cl 5.1(Dimensions)	-	1500	-
Cl 5.1(Dimensions)	-	1500	-
Cl 5.1(Dimensions)	-	1500	-
Cl 5.2(Resistance to Leakage)	-	2000	-
Cl 5.3(Strength)	-	2500	-
Cl 5.3(Strength)	-	2500	-
Cl 5.4(Range & Water Flow Rate)	-	4500	-
Cl 5.5(Swinging)	-	500	-
Cl 5.6(Reel Action)	-	500	-
Cl 6(Workmanship)	-	500	-
Cl 7(Painting)	-	500	-
Cl 7(Painting)	-	500	-
Cl 6(Workmanship)	-	500	-
Cl 5.6(Reel Action)	-	500	-
Cl 5.5(Swinging)	-	500	-
Cl 5.3(Strength)	-	2500	-
Cl 5.3(Strength)	-	2500	-
Cl 5.1(Dimensions)	-	1500	-
Cl 5.1(Dimensions)	-	1500	-
Cl 5.1(Dimensions)	-	1500	-
Cl 5.1(Dimensions)	-	1500	-
Cl 5.1(Dimensions)	-	1500	-
Cl 5.1(Dimensions)	-	1500	-
Cl 5.1(Dimensions)	-	1500	-
Cl 5.1(Dimensions)	-	1500	-
Cl 5.4(Range & Water Flow Rate)	-	4500	-
Cl 5.2(Resistance to Leakage)	-	2500	-

Complete

IS 903 (1993)

Specification for Fire Hose Delivery Couplings, Branch Pipe, Nozzles And Nozzle Spanner - Specificaion

42500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(Finish and workmanship)	-	500	-
4(Marking)	-	0	-
6(Branch pipe)	-	4000	-
6.3(Hydraulic test requirement)	-	6000	-
7(Nozzle)	-	4000	-
7.3(Hydraulic test requirement)	-	6000	-
5(Delivery hose coupling)	-	0	-
5.3(Size and Dimension )	-	6000	-
5.4(Hydraulic test requirement)	-	6000	-
3(Finish and workmanship)	-	500	-
4(Marking)	-	0	-
6(Branch pipe)	-	4000	-
6.3(Hydraulic test requirement)	-	6000	-
7(Nozzle)	-	4000	-
7.3(Hydraulic test requirement)	-	6000	-
5(Delivery hose coupling)	-	0	-
5.3(Size and Dimension )	-	6000	-
5.4(Hydraulic test requirement)	-	6000	-
3(Finish and workmanship)	-	500	-
4(Marking)	-	0	-
6(Branch pipe)	-	4000	-
6.3(Hydraulic test requirement)	-	6000	-
7(Nozzle)	-	4000	-
7.3(Hydraulic test requirement)	-	6000	-
5(Delivery hose coupling)	-	0	-
5.3(Size and Dimension )	-	6000	-
5.4(Hydraulic test requirement)	-	6000	-
8.2(Shape & Dimensions of Spanner)	-	4000	-
8.4(Deflection test of Spanner)	-	2000	-
8.3(Coating of Nozzle Spanner)	-	4000	-

Complete

IS 4947 (2006)

Foam concentrate for producing mechanical foam for fire fighting - Specification (Fourth Revision)

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 3(General Requirements)	-	5000	-
Cl 5(Construction)	-	2000	Cl. 4.2 : RS 500, Cl. 4.4 - RS 500
Cl 6(Capacity and Contents)	-	500	-
Cl 7(Performance Requirements )	-	3000	-
Cl 7.3(Leakage Test)	-	3000	-
Cl 8(Finish)	-	500	-

Complete

IS 8442 (2008)

Stand post type water and foam monitor for fire fighting - Specification (First Revision)

27000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
12.1(Marking)	-	200	-
10.2(Leakage Test)	-	2500	-
10.1(Leakage Test)	-	2500	-
9.2(Performance Requirement (foam cum water monitor))	-	13500	-
9.1(Performance Requirement (water monitor))	-	4000	-
8(Painting)	-	500	-
7(Anti-corrosive treatment)	-	500	-
6(Workmanship and Finish)	-	500	-
5(Construction)	-	1000	-
3.4(Components)	-	500	-
3.3(Shape of monitor)	-	500	-
3.2(Discharge Capacity)	-	500	-
3.1( Size of water monitor)	-	300	-
1(Type)	-	0	-
3.1(Size)	-	300	-
3.1(Dimension of the Flange)	-	300	-
3.3(Shape of monitor)	-	500	-
3.4(Components)	-	500	-
5.1(Construction)	-	1000	-
5.2(Size of Nozzle and diameter of orifice)	-	500	-
5.2(Size of Nozzle and diameter of orifice)	-	500	-
5.2(Size of Nozzle and diameter of orifice)	-	500	-
5.2(Design feature of nozzle)	-	500	-
5.2(Internal Threads of the Nozzle)	-	0	-
5.2(External threads of outlet of barrel)	-	0	-
5.2(Foam Pickup Tube)	-	0	-
6(Workmanship & Finish)	-	500	-
7(Anticorrosive Treatment)	-	500	-
8(Painting)	-	500	-
9.1(Water discharge capacity and HorizontalThrow of Water Monitor)	-	4000	-
9.1(Water discharge capacity and Horizatal Throw of Water Monitor)	-	4000	-
9.1(Water discharge capacity and Horizatal Throw of Water Monitor)	-	4000	-
9.2(Water discharge capacity and HorizontalThrow of Foam cum Water Monitor)	-	13500	-
9.2(Water discharge capacity and HorizontalThrow of Foam cum Water Monitor)	-	13500	-
9.2(Water discharge capacity and HorizontalThrow of Foam cum Water Monitor)	-	13500	-
9.2(HorizontalThrow of Foam Jet)	-	13500	-
9.2(HorizontalThrow of Foam Jet)	-	13500	-
9.2(HorizontalThrow of Foam Jet)	-	13500	-
Fig 5(Foam Control Valve in non-air aspirating type Jet/Spray Nozzle)	-	0	-
10.1(Leakage Test (Hydraulic Pressure Test))	-	2500	-
6(Workmanship & Finish)	-	500	-
11(Accessories)	-	0	-
1(Type)	-	0	-
3.1(Size)	-	300	-
3.1(Dimension of the Flange)	-	300	-
3.3(Shape of monitor)	-	500	-
3.4(Components)	-	500	-
5.1(Construction)	-	1000	-
5.2(Size of Nozzle and diameter of orifice)	-	0	-
5.2(Size of Nozzle and diameter of orifice)	-	0	-
5.2(Size of Nozzle and diameter of orifice)	-	0	-
5.2(Size of Nozzle and diameter of orifice)	-	0	-
5.2(Design feature of nozzle)	-	0	-
5.2(Internal Threads of the Nozzle)	-	0	-
5.2(External threads of outlet of barrel)	-	0	-
5.2(Foam Pickup Tube)	-	0	-
7(Anticorrosive Treatment)	-	500	-
8(Painting)	-	500	-
9.1(Water discharge capacity and HorizontalThrow of Water Monitor)	-	4000	-
9.1(Water discharge capacity and Horizatal Throw of Water Monitor)	-	4000	-
9.1(Water discharge capacity and Horizatal Throw of Water Monitor)	-	4000	-
9.2(Water discharge capacity and HorizontalThrow of Foam cum Water Monitor)	-	13500	-
9.2(Water discharge capacity and HorizontalThrow of Foam cum Water Monitor)	-	13500	-
9.2(Water discharge capacity and HorizontalThrow of Foam cum Water Monitor)	-	13500	-
9.2(HorizontalThrow of Foam Jet)	-	13500	-
9.2(HorizontalThrow of Foam Jet)	-	13500	-
9.2(HorizontalThrow of Foam Jet)	-	13500	-
Fig 5(Foam Control Valve in non-air aspirating type Jet/Spray Nozzle)	-	0	-
10.1(Leakage Test (Hydraulic Pressure Test))	-	2500	-
10.2(Leakage Test of Swivel joints during horizontal rotation & vertical up and down movement.)	-	2500	-
11(Accessories)	-	0	-
10.2(Leakage Test of Swivel joints during horizontal rotation & vertical up and down movement.)	-	2500	-

Complete

IS 8423 (1994)

Specification for controlled percolating hose for fire fighting

20500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl3(The bose shall be made of a jacket of cotton or synthetic material or their combination. The jacket shall be treated internally with any suitable coating agent to ensure controlled percolation. The jacke.t shall be free from visible defects. such as dlrt, knots, lumps and irregulari ty of twists. )	-	500	-
Cl.4.1.1(The nominal internal diameter of hose shall be 38, SO, 63 and 70 rom.The internal diameter of the hose shall be measured by a suitable tapered plug gauge, and shall conform to the specified diameter within a tolerance of + 2·0 mm. -0'0)	-	500	-
Cl.5.(The hose length shall be 30 m or of such length as required.)	-	500	-
Cl.6(The hose shall be flexible and on being machine coiled, the diameter of the coil of 30 m hose shall not exceed 45 em for all slzes in dry state without coupling. The coil diameter shall be measured at the widest part of the coil.)	-	500	-
Cl.7(The average mass oC hose per metre shall not be more than that prescribed in Table 1. For determination of mass, sample of the hose shall be conditioned at 27 ± 2°C and 65 ± 5 percent relative humidity Cor a period of at least 48 hours and then shall be weighed under same conditions.)	-	500	-
Cl.8(The percolation, when tested in accordance with the procedure laid down in 8.1.1 shall not exceed the limits prescribed in Table 2.)	-	3000	-
Cl.9(The full length sample of the dry hose is connected to the pump fitted with water and pressure built up to. 7 kaf/cn,' (70 N/cm' ) steadily over a period of two minutes. After the hose has been at pressure 7 kif/em' ( 70 NIemi) for a period of S minutes, a visual inspection I is made of the length to ascertain the evenness and degree of wetting out along the complete length of hose and at least 75 percent of the hose jacket shall be evenly and consistently wetted out in this manner.)	-	1000	-
Cl.10(Full length of hose shall be subjected to an internal hydraulic pressure of 2'1 MPa (21'4 kgf/ems ) at the rate of I MPa ( 10'2 kaf/em· )/ minute in ac.cordance with 1.3 of IS 443 : 191~ and maintained for a period of one minute. During this test. the hose shan not show breakage of yarn.)	-	14000	proof pressure - RS 3000, Hydraulic Burst pressure - RS 4000, Flammability - RS 2000, Kink test -RS 2000, Change in size - 3000

Complete

IS 12585 (1988)

Specification for thermoplastic hoses (Textile Reinforced) for water - General purpose

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 3(Types)	-	500	-
Cl 4.1(Construction)	-	1000	-
Cl 4.2(Dimensions & Tolerances)	-	2000	-
Cl 4.3.1 & Appendix A(Loss in Mass on Heating)	-	4500	-
Cl 4.3.2(Adhesion)	-	3000	-
Cl 4.3.3(Pressure Requirements)	-	5000	-
Cl 4.3.4(Minimum Bend Radius)	-	4000	-
Cl 4.3.5(Low Temperature Flexibility)	-	5000	-

Complete

IS 15381 (2021)

Fire Blanket - Specification ( First Revision )

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
9,9.1 &9.2(Marking)	-	500	-
7(Workmanship and Finish)	-	500	-
6.3(Temperature Resistance)	-	3500	-
6.1 & 6.2(Fire Performance)	-	12900	Cooking oil - RS 8000, Hydrocarbon Fuel -RS 4900
5(Electrical Resistance)	-	3500	-
4.7(Edges)	-	500	-
4.6(Force and Time for removing & unfolding)	-	800	-
4.5(Deformation)	-	500	-
4.4(Mass)	-	500	-
4.3(Shape & Dimension)	-	800	-
4.2(Hand Holding Device)	-	500	-
Cl 4.1( Construction)	-	500	-

Complete

Bureau of Indian Standards

The National Standards Body of India

Advance Firetec and Research Lab Pvt. Ltd

B-3, 2nd floor, Mangolpuri Industrial Area, Phase 2, New Delhi, New Delhi, South West, Delhi, 110034

9971032375 aftrlab24@gmail.com

Scope List