BIS - LIMS (Laboratory Information Management System)

Advance Firetec and Research Lab Pvt. Ltd

B-3, 2nd floor, Mangolpuri Industrial Area, Phase 2, New Delhi, New Delhi, South West, Delhi, 110034

9971032375 aftrlab24@gmail.com

Scope List

Reset

36 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Exclusion

Testing Charges (Excl. Of Taxes)

Facility Type

Effective Date

Validity Date

Remark

IS 14933 (2001)

High Pressure Fire Fighting Hose -Specification

All type and sizes

54000 View breakup
Rs 21,000/- for Type A

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 3.1(Type)	-	500	-
Cl 3.2 & 3.3(Nom ID)	-	500	-
Cl 3.4(Internal Dia)	-	500	-
Cl 4(Length)	-	500	-
Cl 5(Mass)	-	500	-
Cl 6(Coil Dia)	-	500	-
Cl 7(Reinforcement)	-	500	-
Cl 8(Lining)	-	500	-
Cl 9(Cover)	-	500	-
Cl 10(Hydaulic Proof Pressure Test)	-	2500	-
Cl 11(Hydraulic Burst Pressure Test)	-	4000	-
Cl 12(Kink test)	-	2000	-
Cl 13 & Annex A(Adhesion Test)	-	1000	-
Cl 14 & Annex B(Abrasion Resistance Test)	-	3000	-
Cl 15(Accelerated Ageing Test)	-	5500	-
Cl 16(Change in Length)	-	2000	-
Cl 17.1 & Annex C(Ozone Resistance Test)	-	25000	Lining - Rs 12500, Cover - RS 12500
Cl 17.2(Oil Resistance Test)	-	3000	-
Cl 17.3(Heat Resistance Test)	-	1500	-
Cl 17.3(Heat Resistance Test)	-	1500	-
Cl 17.2(Oil Resistance Test)	-	3000	-
Cl 17.1 & Annex C(Ozone Resistance Test)	-	25000	-
Cl 16(Change in Length)	-	2000	-
Cl 15(Accelerated Ageing Test)	-	5500	-
Cl 14 & Annex B(Abrasion Resistance Test)	-	3000	-
Cl 13 & Annex A(Adhesion Test)	-	1000	-
Cl 12(Kink test)	-	2000	-
Cl 11(Hydraulic Burst Pressure Test)	-	4000	-
Cl 10(Hydaulic Proof Pressure Test)	-	2500	-
Cl 9(Cover)	-	500	-
Cl 8(Lining)	-	500	-
Cl 7(Reinforcement)	-	500	-
Cl 6(Coil Dia)	-	500	-
Cl 5(Mass)	-	500	-
Cl 4(Length)	-	500	-
Cl 3.4(Internal Dia)	-	500	-
Cl 3.2 & 3.3(Nom ID)	-	500	-
Cl 3.1(Type)	-	500	-
Cl 17.3(Heat Resistance Test)	-	1500	-
Cl 17.2(Oil Resistance Test)	-	3000	-
Cl 17.1 & Annex C(Ozone Resistance Test)	-	25000	-
Cl 16(Change in Length)	-	2000	-
Cl 15(Accelerated Ageing Test)	-	5500	-
Cl 14 & Annex B(Abrasion Resistance Test)	-	3000	-
Cl 13 & Annex A(Adhesion Test)	-	1000	-
Cl 12(Kink test)	-	2000	-
Cl 11(Hydraulic Burst Pressure Test)	-	4000	-
Cl 10(Hydaulic Proof Pressure Test)	-	2500	-
Cl 9(Cover)	-	500	-
Cl 8(Lining)	-	500	-
Cl 7(Reinforcement)	-	500	-
Cl 6(Coil Dia)	-	500	-
Cl 5(Mass)	-	500	-
Cl 4(Length)	-	500	-
Cl 3.4(Internal Dia)	-	500	-
Cl 3.2 & 3.3(Nom ID)	-	500	-
Cl 3.1(Type)	-	500	-

Complete

IS 636 (2018)

Non - Percolating flexible fire fighting delivery hose - Specification (Fourth Revision)

All types sizes

62500 View breakup
Type 1 Rs 44,500/- Type 2 Rs 47,000/- Type 3 Rs 62,500/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 6.1.1(Inner lining shall be of rubber or rubberized fabric lining which is generally smooth and practically free from pitting and other imperfections)	-	0	-
Cl 6.1.2(Externally applied elastomeric coating or covering of the reinforcement, if present shall be generally smooth and practically free from pitting and other imperfections)	-	0	-
Cl 6.1.3(The jacket shall be practically free from dirt, knots, lumps, irregularities of the yarn and other visible defects.)	-	500	-
Cl.6.2(The internal diameter of the hose shall be measured by a suitable conical plug gauge and shall conform to the specified diameter with a tolerance of plus 2 and minus 0.0 mm.)	-	500	-
Cl.6.3(Unless specified otherwise, the standard length shall be 30 m. Unless otherwise specified, a tolerance of ± 2 percent shall be permitted on the length prescribed for the hose by the purchaser but the total of all lengths of hose supplied shall be not less than the total quantity specified by the purchaser.)	-	500	-
Cl.6.4(The average mass of hose per meter of 2 m length, without couplings attached, shall not be more than that prescribed in Table 1. For the determination of mass, sample of the hose shall be conditioned at 27 ± 2°C and 65 ± 5 percent relative humidity for a period of at least 48 h and then shall be weighed under the same conditions.)	-	500	-
Cl.6.5(For 30 m length of dry hose without couplings, the coil diameter shall not exceed 45 cm for Type 1, 50 cm for Type 2 and 55 cm for Type 3.)	-	500	-
Cl.6.6(Each hose length shall be subjected to an internal hydraulic pressure of 23 kgf/cm² in accordance with 8.1 of IS 443 (Part 3) increasing the pressure at the rate not exceeding 10 kgf/cm² per min and maintaining it for 1 min. Within this 1 min, the hose shall neither develop any leakage or sweating, nor shall any thread in the jacket break.)	-	2500	-
Cl.6.7(A test length of hose, 1 m clear of fittings when subjected to an internal hydraulic pressure in accordance with 8.3 of IS 443 (Part 3) while increasing the pressure at the rate not exceeding 10 kgf/cm2 per min shall not burst or show leakage before a pressure of 38 kgf/cm2 is reached)	-	2500	-
Cl.6.8(There shall be no sign of leakage or rupture and no thread in the jacket shall break after retaining the internal hydraulic pressure of 23 kgf/cm2 for 30 seconds.)	-	1000	-
Cl.6.9(The increase in length shall not exceed 6 percent at an internal hydraulic pressure of 10 kgf/cm2 for 2 minutes.)	-	1000	-
Cl.6.10(The increase in diameter shall not be more than 10% at an internal hydraulic pressure of 10 kgf/cm2 for 2 minutes.)	-	1000	-
Cl 6.11 (Adhesion (Cl. 6.11.1))(Rate of separation shall not exceed 25 mm/min 1) Cover)	-	500	-
Cl 6.11 (Adhesion (Cl. 6.11.1))(Rate of separation shall not exceed 25 mm/min 2) Jet)	-	500	-
Cl.6.11 Acccleraled Ageing Test (Cl. 6.11.2) - 1)(After ageing, there shall be no tackiness on the surface of lining or the surface of the cover. )	-	2000	-
Cl.6.11 Acccleraled Ageing Test (Cl. 6.11.2) - 2)(shall meet the requirements. given in Cl.6.7 (A test length of hose, 1 m clear of fittings when subjected to an internal hydraulic pressure in accordance with 8.3 of IS 443 (Part 3) while increasing the pressure at the rate not exceeding 10 kgf/cm2 per min shall not burst or show leakage before a pressure of 38 kgf/cm2 is reached))	-	2500	-
Cl.6.11 Acccleraled Ageing Test (Cl. 6.11.2) - 3)(Rate of separation shall not exceed 25 mm/min 1) Cover)	-	500	-
Cl.6.11 Acccleraled Ageing Test (Cl. 6.11.2) - 3)(Rate of separation shall not exceed 25 mm/min 2) Jet)	-	500	-
Cl.6.12(When determined by the method described in Annex C, the average number of cycles completed before bursting of three test pieces, shall not be less than the value specified in Table 2.)	-	2000	-
Cl.6.13(When tested in accordance with Annex D, the amount of moisture absorbed shall not exceed 0.20 kg/m2 for Type 2 hoses and 0.02 kg/m2 for Type 3 hoses.)	-	1000	-
Cl.6.14(When tested by the method described in Annex E, none of the test samples shall burst at less than 8 s of the application of the hot cube for Type 2 and 20 s for Type 3 hose.)	-	1500	-
Cl.6.15 (1)(The length shall be laid horizontally and the central fully immersed portion of the hose shall be visually examined for any swelling of rubber, weathering and cracking in the rubber lining)	-	2000	-
Cl.6.15 (2)(Rate of separation shall not exceed 25 mm/min 1) Cover)	-	500	-
Cl.6.15 (2)(Rate of separation shall not exceed 25 mm/min 2) Jet)	-	500	-
Cl.6.16(When tested by the method prescribed in IS 443 (Part 1), the lining (for Types 1, 2 and 3) and cover (for Type 3 only) of the hose shall neither develop cracking nor crazing when seen under X2 magnification, except at the cut edges of the hose)	-	25000	Lining - RS 12500, Cover - RS 12500
Cl.6.17(When tested in accordance with Annex F, at a test temperature of, at a test temperature of 300 ± 10°C for Types 1 and 2, and 400 ± 10° C for Type 3, in none of the four tests shall the test piece show signs of leakage within 120 s from the application of the filament rod or on removal of this filament rod after the specified period)	-	10000	-
Cl.6.18(When tested in accordance with Annex H, the pressure loss per 23 m length shall not exceed the values specified in Table 3 at the specified flow rate and inlet pressure (Recommendations for pressure testing of hoses in service are given at Annex G).)	-	3000	-

Complete

IS 16018 (2012)

Wheeled fire extinguishers - Performance and construction - Specification

All types and all capacity

247300 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 4(Types of Wheeled Fire Extinguishers)	-	200	-
Cl 5.3(Fill Density)	-	600	-
Cl 5.4(Filling Tolerance)	-	600	-
Cl 5.5.1(Nominal Charge)	-	200	-
Cl 6.1(Operating Temperature)	-	300	-
Cl 6.2.1(Effective Discharge Time)	-	600	-
Cl 6.2.2(Bulk Range)	-	600	-
Cl 6.5(Intermittent Discharge Test)	-	1500	-
9.1(Colour)	-	200	-
8.18.3(Hose Retaining Unit)	-	200	-
8.18.2(Mobility)	-	1300	-
8.18.1(Carriage Assembly)	-	1100	-
8.17(Dip tubes and Filters for water based Extinguisher)	-	1200	-
8.16(Pressure gauges for low pressure extinguishers)	-	8500	-
8.15(Safety Locking Devices)	-	1200	-
8.14(Method of operation for gas cartridge type extinguishers)	-	1200	-
8.14(Method of operation for carbon dioxide extinguishers)	-	1200	-
8.13.3(Load test on discharge horn)	-	1500	-
8.13.2(Requirement to prevent loosening or detachment)	-	300	-
8.13.1(Horn of carbon dioxide extinguisher)	-	200	-
8.12(Control valve test)	-	300	-
8.11.3(Requirement of burst pressure of hose assemblies for carbon dioxide fire extinguishers)	-	400	-
8.11.3(Requirement of burst pressure of hose assemblies for except carbon dioxide fire extinguishers)	-	400	-
8.11.2(Requirement of hose and coupling system)	-	400	-
8.11.1(Requirement of the Discharge Assemblies)	-	400	-
8.9.2(Leakage Test)	-	600	-
8.8(Safety and Anti-overfill devices)	-	1100	Cl. 8.8.1 - Rs 600, Cl. 8.8.2 - Rs 500
8.7.6(Requirement of edges and surfaces)	-	0	-
8.7.5(Requirement of burst test of cap,valve and closure)	-	2200	-
8.7.4(Requirement of collar)	-	0	-
8.7.3(Requirement of filling opening diameter)	-	200	-
8.7.2(Requirement of threaded connections on cylinder)	-	200	-
8.7.1(Caps valves and closure)	-	200	-
8.6(Minimum wall thickness of the cylinder)	-	600	-
8.3.3(Pressure cycling Test)	-	3000	-
8.3.2(Deformation Test)	-	1600	-
8.3.1(Burst Test)	-	3000	-
8.2(High Pressure Cylinder)	-	300	-
8.1.7(Drain Plug)	-	100	-
8.1.6(Thread of Plastic Components)	-	200	-
8.1.4(Construction Requirement)	-	0	-
8.1.3(Requirement of Welding)	-	300	-
8.1.2(Leakage Observation during conditioning Test)	-	500	-
7.2(Class 'B' Fire Test 233B)	-	85000	-
7.2(Class 'B' Fire Test 183B)	-	75000	-
7.2(Class 'B' Fire Test 144B)	-	67000	-
7.2(Class 'B' Fire Test 113B)	-	57000	-
7.2(Class 'B' Fire Test 89B)	-	52000	-
7.2(Class 'B' Fire Test 70B)	-	42000	-
7.2(Class 'B' Fire Test 55B)	-	37000	-
7.2(Class 'A' Fire Test 20A)	-	73000	-
7.2(Class 'A' Fire Test 15A)	-	51000	-
7.2(Class 'A' Fire Test 10A)	-	37000	-
7.2(Class 'A' Fire Test 6A)	-	32000	-
7.2(Class 'A' Fire Test 4A)	-	27000	-
7.2(Class 'A' Fire Test 3A)	-	1800	-
6.7.4(Displaced Test)	-	300	-
6.7.3(Nozzle Drop Test)	-	200	-
6.7.2(Durability test of trailer mounted fire extinguisher)	-	3000	-
6.7.1(Observation of Durability Test after Nozzle Drop Test and Displaced Test)	-	2500	-
6.6.2(Internal Corrosion Test)	-	6000	-
6.6.1(External Corrosion Test)	-	6000	-
6.4(Retention of charge)	-	600	-
5.5.2(Gross Mass)	-	300	-
3.16 and 8.1.1(Determination of maximum service pressure)	-	600	-
3.19 and 8.3(Determination of Service Pressure)	-	200	-
Cl no 4(16018 :2012)	-	200	-
Cl no 5.3(16018 :2012)	-	600	-
Cl no 5.4(16018 :2012)	-	600	-
Cl no 5.5.1(16018 :2012)	-	200	-
Cl no 5.5.2(16018 :2012)	-	300	-
Cl no 6.1(16018 :2012)	-	300	-
Cl no 6.2.1 & 6.2.1.1(16018 :2012)	-	600	-
Cl no 6.6.2(16018 :2012)	-	600	-
Cl no 6.3 & 6.3.1(16018 :2012)	-	2200	-
Cl no 6.4(16018 :2012)	-	600	-
Cl no 6.5(16018 :2012)	-	1500	-
Cl no 6.6.1(16018 :2012)	-	6000	-
Cl no 6.2.2 & 6.2.2.1(16018 :2012)	-	6000	-
Cl no 6.7(16018 :2012)	-	6000	-
Cl no 6.8(16018 :2012)	-	30000	-
Cl no 7.1(16018 :2012)	-	85000	-
Cl no 8.2(16018 :2012)	-	300	-
Cl no 8.1(16018 :2012)	-	1000	-
Cl no 8.3(16018 :2012)	-	0	-
Cl no 8.3.1(16018 :2012 Burst test)	-	3000	-
Cl no 8.3.2(16018 :2012)	-	1600	-
Cl no 8.3.3(16018 :2012)	-	3000	-
Cl no 8.6(16018 :2012)	-	600	-
Cl no 8.7(16018 :2012)	-	200	-
Cl no 8.7.2(16018 :2012)	-	200	-
Cl no 8.7.3(16018 :2012)	-	200	-
Cl no 8.7.4(16018 :2012)	-	0	-
Cl no 8.7.5(16018 :2012)	-	2200	-
Cl no 8.7.6(16018 :2012)	-	0	-
Cl no 8.8.1(16018 :2012)	-	600	-
Cl no 8.8.2(16018 :2012)	-	500	-
Cl no 8.9.2(16018 :2012)	-	600	-
Cl no 8.12(16018 :2012)	-	300	-
Cl no 8.13.1 to 8.13.3(Horn for Carbon Di-oxide Extinguishers)	-	200	-
Cl no 8.14(16018 :2012)	-	1200	-
Cl no 8.15(16018 :2012)	-	1200	-
Cl no 8.17(16018 :2012)	-	1200	-
Cl no 8.18.1(16018 :2012)	-	1100	-
Cl no 8.18.2(16018 :2012)	-	1300	-
Cl no 8.18.3(16018 :2012)	-	200	-
Cl no 9.1(16018 :2012)	-	200	-
Cl no 9.2(16018 :2012)	-	300	-
Cl no 4(16018 :2012)	-	200	-
Cl no 5.4(16018 :2012)	-	600	-
Cl no 5.5.1(16018 :2012)	-	200	-
Cl no 5.5.2(16018 :2012)	-	300	-
Cl no 6.1(16018 :2012)	-	300	-
Cl no 6.2.1 & 6.2.1.1(16018 :2012)	-	600	-
Cl no 6.2.2 & 6.2.2.1(16018 :2012)	-	600	-
Cl no 6.3 & 6.3.1(16018 :2012)	-	2200	-
Cl no 6.4(16018 :2012)	-	600	-
Cl no 6.5(16018 :2012)	-	1500	-
Cl no 6.6.1(16018 :2012)	-	6000	-
Cl no 6.6.2(16018 :2012)	-	6000	-
Cl no 6.7(16018 :2012)	-	6000	-
Cl no 6.8(16018 :2012)	-	30000	-
Cl no 7.1(16018 :2012)	-	85000	-
Cl no 8.1(16018 :2012)	-	1000	-
Cl no 8.2(16018 :2012)	-	300	-
Cl no 8.3(16018 :2012)	-	0	-
Cl no 8.3.1(16018 :2012)	-	3000	-
Cl no 8.3.2(16018 :2012)	-	1600	-
Cl no 8.3.3(16018 :2012)	-	3000	-
Cl no 8.6(16018 :2012)	-	600	-
Cl no 8.7(16018 :2012)	-	200	-
Cl no 8.7.2(16018 :2012)	-	200	-
Cl no 8.7.3(16018 :2012)	-	200	-
Cl no 8.7.4(16018 :2012)	-	0	-
Cl no 8.7.5(16018 :2012)	-	2200	-
Cl no 8.7.6(16018 :2012)	-	0	-
Cl no 8.8.1(16018 :2012)	-	600	-
Cl no 8.9.2(16018 :2012)	-	600	-
Cl no 8.11.1 to 8.11.3(Discharge assembly)	-	400	-
Cl no 8.12(16018 :2012)	-	300	-
Cl no 8.13.1(16018 :2012)	-	200	-
Cl no 8.14(16018 :2012)	-	1200	-
Cl no 8.15(16018 :2012)	-	1200	-
Cl no 8.17(16018 :2012)	-	1200	-
Cl no 8.18.1(16018 :2012)	-	1100	-
Cl no 8.18.2(16018 :2012)	-	1300	-
Cl no 8.18.3(16018 :2012)	-	200	-
Cl no 9.1(16018 :2012)	-	200	-
Cl no 9.2(16018 :2012)	-	300	-
Cl 6.3(Resistance To Temperature Changes)	-	2200	-
Cl no 5.3(16018 :2012)	-	600	-

Complete

Exclusion: Welded low carbon steel Cl 8.4.1.1, Stainless steel Cylinders Cl 8.4.2.1 & 8.4.2.2, Aluminium Cylinders Cl 8.5 Plastic component Cl 8.10 Pressure gauge Cl 8.16.5, 8.16.6, 8.16.8 Gasket and O ring Cl 8.19

IS 4989 (2018)

Foam concentrate for producing mechanical foam for fire fighting - Specification (Fourth Revision)

All types of foam concentrate

117800 View breakup
AFFF, FFFP- Rs 71,300/- PF, FP- Rs 68,900 SF-Rs 8,900/- AR-FP- Rs 1,15,400/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 4.1, Table 1, Sr. No. 1 (Visual Examination )	-	200	-
Cl. 4.1, Table 1, Sr. No. 2(Freezing and thrawing)	-	1800	-
Cl. 4.1, Table 1, Sr. No. 3(pH (Original Sample))	-	300	-
Cl. 4.1, Table 1, Sr. No. 3(pH (ageing Sample))	-	600	-
Cl. 4.1, Table 1, Sr. No. 5(Viscosity)	-	600	-
Cl. 4.1, Table 1, Sr. No. 6(pour point)	-	600	-
Cl. 4.1, Table 1, Sr. No. 7(Sludge content)	-	900	original - Rs 300, ageing - RS 600
Cl. 4.1, Table 1, Sr. No. 8(Surface tension)	-	1200	-
Cl. 4.1, Table 1, Sr. No. 10(spreading coefficient)	-	1200	-
Cl. 4.1, Table 1, Sr. No. 1 (Visual Examination )	-	200	-
Cl. 4.1, Table 1, Sr. No. 2(Freezing and thrawing)	-	1800	-
Cl. 4.1, Table 1, Sr. No. 3(pH (Original Sample))	-	300	-
Cl. 4.1, Table 1, Sr. No. 3(pH (ageing Sample))	-	600	-
Cl. 4.1, Table 1, Sr. No. 4(Miscibility with distilled water)	-	600	-
Cl. 4.1, Table 1, Sr. No. 5(Viscosity)	-	600	-
Cl. 4.1, Table 1, Sr. No. 6(pour point)	-	600	-
Cl. 4.1, Table 1, Sr. No. 7(Sludge content)	-	900	original - Rs 300, ageing - Rs 600
Cl. 4.1, Table 1, Sr. No. 8(Surface tension)	-	1200	-
Cl. 4.1, Table 1, Sr. No. 10(spreading coefficient)	-	1200	-
Cl. 4.1, Table 1, Sr. No. 1 (Visual Examination )	-	200	-
Cl. 4.1, Table 1, Sr. No. 2(Freezing and thrawing)	-	1800	-
Cl. 4.1, Table 1, Sr. No. 3(pH (Original Sample))	-	300	-
Cl. 4.1, Table 1, Sr. No. 3(pH (ageing Sample))	-	600	-
Cl. 4.1, Table 1, Sr. No. 4(Miscibility with distilled water)	-	600	-
Cl. 4.1, Table 1, Sr. No. 5(Viscosity)	-	600	-
Cl. 4.1, Table 1, Sr. No. 6(pour point)	-	600	-
Cl. 4.1, Table 1, Sr. No. 7(Sludge content)	-	900	original - RS 300, ageing - RS 900
Cl. 4.1, Table 1, Sr. No. 8(Surface tension)	-	1200	-
Cl. 4.1, Table 1, Sr. No. 10(spreading coefficient)	-	1200	-
Cl. 4.1, Table 1, Sr. No. 1 (Visual Examination )	-	200	-
Cl. 4.1, Table 1, Sr. No. 2(Freezing and thrawing)	-	1800	-
Cl. 4.1, Table 1, Sr. No. 3(pH (Original Sample))	-	300	-
Cl. 4.1, Table 1, Sr. No. 3(pH (ageing Sample))	-	600	-
Cl. 4.1, Table 1, Sr. No. 4(Miscibility with distilled water)	-	600	-
Cl. 4.1, Table 1, Sr. No. 5(Viscosity)	-	600	-
Cl. 4.1, Table 1, Sr. No. 6(pour point)	-	600	-
Cl. 4.1, Table 1, Sr. No. 7(Sludge content)	-	900	original - RS 300, ageing - RS 900
Cl. 4.1, Table 1, Sr. No. 8(Surface tension)	-	1200	-
Cl. 4.1, Table 1, Sr. No. 10(spreading coefficient)	-	1200	-
Clause No. 4.2, Sr. No. IV(d) of Table 2, Annex-M(Burn Back for Polar Solvent Fires with synthetic sea water)	-	24000	-
Clause No. 4.2, Sr. No. IV(d) of Table 2, Annex-M(Burn Back for Polar Solvent Fires with synthetic sea water)	-	24000	-
Clause No. 4.2, Sr. No. IV(c) of Table 2, Annex-M(Sealability/Film forming for Polar Solvent Fires with synthetic sea water)	-	24000	-
Clause No. 4.2, Sr. No. IV(b) of Table 2, Annex-M(Fire Extinction Time Polar Solvent Fire with synthetic sea water)	-	24000	-
Clause No. 4.2, Sr. No. IV(b) of Table 2, Annex-M(Fire Extinction Time Polar Solvent Fire with synthetic sea water)	-	24000	-
Clause No. 4.2, Sr. No. IV(a) of Table 2, Annex-M(Fire Control Time for Polar Solvent Fire with synthetic sea water)	-	24000	-
Clause No. 4.2, Sr. No. IV(a) of Table 2, Annex-M(Fire Control Time for Polar Solvent Fire with synthetic sea water)	-	24000	-
Clause No. 4.2, Sr. No. IV(d) of Table 2, Annex-M(Burn Back for Polar Solvent Fires)	-	24000	-
Clause No. 4.2, Sr. No. IV(d) of Table 2, Annex-M(Burn Back for Polar Solvent Fires)	-	24000	-
Clause No. 4.2, Sr. No. IV(b) of Table 2, Annex-M(Fire Extinction Time Polar Solvent Fire)	-	24000	-
Clause No. 4.2, Sr. No. IV(c) of Table 2, Annex-M(Sealability/Film forming for Polar Solvent Fires)	-	24000	-
Clause No. 4.2, Sr. No. IV(b) of Table 2, Annex-M(Fire Extinction Time Polar Solvent Fire)	-	24000	-
Clause No. 4.2, Sr. No. IV(a) of Table 2, Annex-M(Fire Control Time for Polar Solvent Fire)	-	24000	-
Clause No. 4.2, Sr. No. IV(a) of Table 2, Annex-M(Fire Control Time for Polar Solvent Fire)	-	24000	-
Clause No. 4.2, Sr. No. III(d) of Table 2, Annex-K(Burn Back for Hydrocarbon Fires (Non Polar) with synthetic sea water)	-	30000	-
Clause No. 4.2, Sr. No. III(d) of Table 2, Annex-K(Burn Back for Hydrocarbon Fires (Non Polar) with synthetic sea water)	-	30000	-
Clause No. 4.2, Sr. No. III(c) of Table 2, Annex-K(Sealability/Film forming for Hydrocarbon Fires (Non Polar) with synthetic sea water)	-	30000	-
Clause No. 4.2, Sr. No. III(b) of Table 2, Annex-K(Fire Extinction Time for Hydrocarbon Fires (Non Polar) with synthetic sea water)	-	30000	-
Clause No. 4.2, Sr. No. III(b) of Table 2, Annex-K(Fire Extinction Time for Hydrocarbon Fires (Non Polar) with synthetic sea water)	-	30000	-
Clause No. 4.2, Sr. No. III(b) of Table 2, Annex-K(Fire Extinction Time for Hydrocarbon Fires (Non Polar) with synthetic sea water)	-	30000	-
Clause No. 4.2, Sr. No. III(a) of Table 2, Annex-K(Fire Control Time for Hydrocarbon Fires (Non Polar) with synthetic sea water)	-	30000	-
Clause No. 4.2, Sr. No. III(a) of Table 2, Annex-K(Fire Control Time for Hydrocarbon Fires (Non Polar) with synthetic sea water)	-	30000	-
Clause No. 4.2, Sr. No. III(d) of Table 2, Annex-K(Burn Back for Hydrocarbon Fires (Non Polar) with potable water)	-	30000	-
Clause No. 4.2, Sr. No. III(d) of Table 2, Annex-K(Burn Back for Hydrocarbon Fires (Non Polar) with potable water)	-	30000	-
Clause No. 4.2, Sr. No. III(c) of Table 2, Annex-K(Sealability/Film forming for Hydrocarbon Fires (Non Polar) with potable water)	-	30000	-
Clause No. 4.2, Sr. No. III(b) of Table 2, Annex-K(Fire Extinction Time for Hydrocarbon Fires (Non Polar) with potable water)	-	30000	-
Clause No. 4.2, Sr. No. III(b) of Table 2, Annex-K(Fire Extinction Time for Hydrocarbon Fires (Non Polar) with potable water)	-	30000	-
Clause No. 4.2, Sr. No. III(b) of Table 2, Annex-K(Fire Extinction Time for Hydrocarbon Fires (Non Polar) with potable water)	-	30000	-
Clause No. 4.2, Sr. No. III(a) of Table 2, Annex-K(Fire Control Time for Hydrocarbon Fires (Non Polar) with potable water)	-	30000	-
Clause No. 4.2, Sr. No. III(a) of Table 2, Annex-K(Fire Control Time for Hydrocarbon Fires (Non Polar) with potable water)	-	30000	-
Clause No. 4.2, Sr. No. II of Table 2, Annex-J(25% Drainage Time)	-	1200	-
Clause No. 4.2, Sr. No. II of Table 2, Annex-J(25% Drainage Time)	-	1200	-
Clause No. 4.2, Sr. No. II of Table 2, Annex-J(25% Drainage Time)	-	1200	-
Clause No. 4.2, Sr. No. II of Table 2, Annex-J(25% Drainage Time)	-	1200	-
Clause No. 4.2, Sr. No. I of Table 2, Annex-J(Expansion)	-	1200	-
Clause No. 4.2, Sr. No. I of Table 2, Annex-J(Expansion)	-	1200	-
Clause No. 4.2, Sr. No. X of Table 1, Annex-G(Spreading Coefficient)	-	1200	-
Clause No. 4.2, Sr. No. X of Table 1, Annex-G(Spreading Coefficient)	-	1200	-
Clause No. 4.2, Sr. No. IX of Table 1, Annex-G(Surface Tension)	-	1200	-
Clause No. 4.2, Sr. No. VIII of Table 1, Annex-F(Sludge Content for Aged Sample)	-	600	-
Clause No. 4.2, Sr. No. VIII of Table 1, Annex-F(Sludge Content for Original Sample)	-	300	-
Clause No. 4.2, Sr. No. VIII of Table 1, Annex-F(Sludge Content for Original Sample)	-	300	-
Clause No. 4.2, Sr. No. VII of Table 1, Annex-E(Pour Point)	-	600	-
Clause No. 4.2, Sr. No. VI of Table 1, using viscosity meter see sl No. (iv) of table 2 of IS 1206 (Part 3)(Viscosity (Kinematic))	-	600	-
Clause No. 4.2, Sr. No. VI of Table 1, using viscosity meter see sl No. (iv) of table 2 of IS 1206 (Part 3)(Viscosity (Kinematic))	-	600	-
Clause No. 4.2, Sr. No. V of Table 1, Annex-D(Misciblity with synthetic sea water)	-	600	-
Clause No. 4.2, Sr. No. V of Table 1, Annex-D(Misciblity with distilled water)	-	600	-
Clause No. 4.2, Sr. No. IV of Table 1, Annex-C(Specific Gravity of aged sample)	-	600	-
Clause No. 4.2, Sr. No. IV of Table 1, Annex-C(Specific Gravity of original sample)	-	300	-
Clause No. 4.2, Sr. No. IV of Table 1, Annex-C(Specific Gravity of aged sample)	-	600	-
Clause No. 4.2, Sr. No. IV of Table 1, Annex-C(Specific Gravity of original sample)	-	300	-
Clause No. 4.2, Sr. No. IV of Table 1, Annex-C(Specific Gravity of aged sample)	-	600	-
Clause No. 4.2, Sr. No. IV of Table 1, Annex-C(Specific Gravity of original sample)	-	300	-
Clause No. 4.2, Sr. No. IV of Table 1, Annex-C(Specific Gravity of aged sample)	-	600	-
Clause No. 4.2, Sr. No. IV of Table 1, Annex-C(Specific Gravity of original sample)	-	300	-
Clause No. 4.2, Sr. No. III of Table 1, Annex-B(pH of aged sample)	-	600	-
Clause No. 4.2, Sr. No. III of Table 1, Annex-B(pH of original sample)	-	300	-
Clause No. 4.2, Sr. No. III of Table 1, Annex-B(pH of aged sample)	-	600	-
Clause No. 4.2, Sr. No. III of Table 1, Annex-B(pH of original sample)	-	300	-
Clause No. 4.2, Sr. No. II of Table 1, Annex-A-2(Freezing and thawing)	-	1800	-
Clause No. 4.2, Sr. No. I of Table 1, Annex-A-1(Visual Examination)	-	200	-
Clause No. 4.1(General observation regarding colour and odour)	-	0	-
Clause No. 4.1(General observation regarding colour and odour)	-	0	-
Cl no 4.1(4989:2018)	-	0	-
Cl no 4.2 Table no 1(4989:2018 (A-1))	-	300	-
Cl no 4.2 Table no 1(4989:2018 (A-2))	-	1800	-
Cl no 4.2 Table no 1(4989:2018 (Annex B))	-	900	-
Cl no 4.2 Table no 1(4989:2018 (Annex B))	-	900	-
Cl no 4.2 Table no 1(4989:2018 (Annex C))	-	900	-
Cl no 4.2 Table no 1(4989:2018 (Annex C))	-	900	-
Cl no 4.2 Table no 1(4989:2018 (Annex C))	-	900	-
Cl no 4.2 Table no 1(4989:2018 (Annex D))	-	600	-
Cl no 4.2 Table no 1(4989:2018 (Using Viscocity meter See Sl no(iv)of Table 2of IS 1206 part 3))	-	600	-
Cl no 4.2 Table no 1(4989:2018 (Annex E))	-	600	-
Cl no 4.2 Table no 1(4989:2018 (Annex F))	-	900	-
Cl no 4.2 Table no 1(4989:2018 (Annex F))	-	900	-
Cl no 4.2 Table no 1(4989:2018 (Annex G))	-	1200	-
Cl no 4.2 Table no 1(4989:2018 (Annex G))	-	1200	-
Cl no 4.2 Table no 2(4989:2018 (Annex J))	-	2400	-
Cl no 4.2 Table no 2(4989:2018 (Annex J))	-	2400	-
Cl no 4.2 Table no 2(4989:2018 (Annex K))	-	30000	-
Cl no 4.2 Table no 2(4989:2018 (Annex K))	-	30000	-
Cl no 4.2 Table no 2(4989:2018 (Annex K))	-	30000	-
Cl no 4.2 Table no 2(4989:2018 (Annex M))	-	24000	-
Cl no 4.2 Table no 2(4989:2018 (Annex M))	-	24000	-
Cl no 4.2 Table no 2(4989:2018 (Annex M))	-	24000	-
Cl no 4.2 Table no 2(4989:2018 (Annex M))	-	24000	-
Cl no 4.1(4989:2018)	-	0	-
Cl no 4.2 Table no 1(4989:2018 (A-1))	-	200	-
Cl no 4.2 Table no 1(4989:2018 (A-2))	-	1800	-
Cl no 4.2 Table no 1(4989:2018 (Annex B))	-	900	-
Cl no 4.2 Table no 1(4989:2018 (Annex B))	-	900	-
Cl no 4.2 Table no 1(4989:2018 (Annex C))	-	900	-
Cl no 4.2 Table no 1(4989:2018 (Annex C))	-	900	-
Cl no 4.2 Table no 1(4989:2018 (Annex D))	-	600	-
Cl no 4.2 Table no 1(4989:2018 (Using Viscocity meter See Sl no(iv)of Table 2of IS 1206 part 3))	-	600	-
Cl no 4.2 Table no 1(4989:2018 (Annex E))	-	600	-
Cl no 4.2 Table no 1(4989:2018 (Annex F))	-	900	-
Cl no 4.2 Table no 1(4989:2018 (Annex F))	-	900	-
Cl no 4.2 Table no 1(4989:2018 (Annex G))	-	1200	-
Cl no 4.2 Table no 1(4989:2018 (Annex G))	-	1200	-
Cl no 4.2 Table no 2(4989:2018 (Annex J))	-	2400	-
Cl no 4.2 Table no 2(4989:2018 (Annex J))	-	2400	-
Cl no 4.2 Table no 2(4989:2018 (Annex K))	-	30000	-
Cl no 4.2 Table no 2(4989:2018 (Annex K))	-	30000	-
Cl no 4.2 Table no 2(4989:2018 (Annex K))	-	30000	-
Cl no 4.2 Table no 2(4989:2018 (Annex K))	-	30000	-
Cl no 4.2 Table no 2(4989:2018 (Annex M))	-	24000	-
Cl no 4.2 Table no 2(4989:2018 (Annex M))	-	24000	-
Cl no 4.2 Table no 2(4989:2018 (Annex M))	-	24000	-
Cl no 4.2 Table no 2(4989:2018 (Annex M))	-	24000	-
Cl. 4.1, Table 1, Sr. No. 4(Miscibility with distilled water)	-	600	-
Clause No. 4.2, Sr. No. VIII of Table 1, Annex-F(Sludge Content for Aged Sample)	-	600	-
Cl no 4.2 Table no 2(4989:2018 (Annex K))	-	30000	-

Complete

IS 4308 (2019)

Dry Chemical Powders for Fire Fighting — BC, ABC and D Types — Specification ( Third Revision )

All types of Dry Chemical Powder

80400 View breakup
Rs 34,854.45/- for Type BC Rs 44,240.925 for Type ABC Rs 18,200/- for Type D

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 5 Table 1(i)(Main Chemical constituent-Sodium/Potassium bicarbonate )	-	1800	-
Clause 5 Table 1(iii)(Apparent density (Declared value by the manufacturer))	-	600	-
Clause 5 Table 1(iv)(Particle size / sieve analysis (Declared value by the manufacturer))	-	600	-
Clause 5 Table 1(vi)(Water repellency)	-	1200	-
Clause 5 Table 1(vii)(Moisture content)	-	600	-
Clause 5 Table 1(viii)(Rate of flow)	-	600	-
Clause 5 Table 1(ix)(Foam compatibility (required if declared by the manufacturer))	-	5000	-
Clause 5 Table 1(x)(Fire test)	-	37000	55B - RS 37000
Clause 5 Table 1(xi)(Temperature resistance test)	-	1800	-
Clause 5 Table 1(xii)(colour)	-	200	-
Clause 5 Table 1(i)(Main chemical constituent-(Monoammonuim phosphate))	-	2400	-
Clause 5 Table 1(iii)(Apparent density (Declared value by the manufacturer))	-	600	-
Clause 5 Table 1(iv)(Particle size / sieve analysis (Declared value by the manufacturer))	-	600	-
Clause 5 Table 1(vi)(Water repellency)	-	1200	-
Clause 5 Table 1(vii)(Moisture content)	-	600	-
Clause 5 Table 1(viii)(Rate of flow)	-	600	-
Clause 5 Table 1(ix)(Foam compatibility (required if declared by the manufacturer))	-	5000	-
Clause 5 Table 1(x)(Fire test)	-	53000	2A - RS 16000, 55B-RS 37000
Clause 5 Table 1(xi)(Temperature resistance test)	-	1800	-
Clause 5 Table 1(xii)(colour)	-	200	-
Clause 5 Table 1(i)(Main chemical constituent(Eutectic mixture of chlorides of sodium, potassium and barium))	-	800	-
Clause 5 Table 1(iii)(Apparent density (Declared value by the manufacturer))	-	600	-
Clause 5 Table 1(iv)(Particle size / sieve analysis (Declared value by the manufacturer))	-	600	-
Clause 5 Table 1(vi)(Water repellency)	-	1200	-
Clause 5 Table 1(vii)(Moisture content)	-	600	-
Clause 5 Table 1(viii)(Rate of flow)	-	600	-
Clause 5 Table 1(x)(Fire test)	-	10000	D Class - RS 10000
Clause 5 Table 1(xi)(Temperature resistance test)	-	1800	-
Clause 5 Table 1(xii)(colour)	-	200	-
Clause No. 5, Sr. No. XII of Table 1(Colour of 'D' Powder)	-	200	-
Clause No. 5, Sr. No. XII of Table 1(Colour of 'BC' Powder)	-	200	-
Clause No. 5, Sr. No. XII of Table 1(Colour of 'ABC' Powder)	-	200	-
Clause No. 5, Sr. No. XI of Table 1, Annex-K(Temperature Resistance Test)	-	1800	-
Clause No. 5, Sr. No. X of Table 1, Annex-J(Fire test for Class 'D')	-	10000	-
Clause No. 5, Sr. No. X of Table 1, Annex-J(Fire test for Class 'B')	-	37000	-
Clause No. 5, Sr. No. X of Table 1, Annex-J(Fire test for Class 'A')	-	16000	-
Clause No. 5, Sr. No. IX of Table 1, Annex-H(Foam Compatibility)	-	5000	-
Clause No. 5, Sr. No. VIII of Table 1, Annex-G(Rate of flow/ Free flowing Characteristic for Class D Powder)	-	600	-
Clause No. 5, Sr. No. VIII of Table 1, Annex-G(Rate of flow/ Free flowing Characteristic)	-	600	-
Clause No. 5, Sr. No. VII of Table 1, Annex-F(Moisture Content)	-	600	-
Clause No. 5, Sr. No. VI of Table 1, Annex-E(Water Repellency)	-	1200	-
Clause No. 5, Sr. No. V of Table 1, Annex-D(Hygroscopicity)	-	1800	-
Clause No. 5, Sr. No. IV of Table 1, Annex-C(Particle Size/ Sieve Analysis)	-	600	-
Clause No. 5, Sr. No. III of Table 1, Annex-B(Aparent Denisty)	-	600	-
Clause No. 5, Sr. No. II of Table 1, Annex-A(Minimum Main Chemical Constituent for D Powder)	-	800	-
Clause No. 5, Sr. No. II of Table 1, Annex-A(Minimum Main Chemical Constituent for BC Powder)	-	1800	-
Clause No. 5, Sr. No. II of Table 1, Annex-A(Minimum Main Chemical Constituent for ABC Powder)	-	2400	-
Clause No. 5, Sr. No. I of Table 1, Annex-A(Main Chemical Constituent for D Powder)	-	800	-
Clause No. 5, Sr. No. I of Table 1, Annex-A(Main Chemical Constituent for BC Powder)	-	1800	-
Clause No. 5, Sr. No. I of Table 1, Annex-A(Main Chemical Constituent of ABC Powder)	-	2400	-
Clause 5 Table 1(iv)(Particle size / sieve analysis (Declared value by the manufacturer))	-	600	-
Clause 5 Table 1(i)(Minimum main chemical constituent)	-	2400	ABC -RS 2400, BC - RS 1800, D - RS 800
Clause 5 Table 1(iii)(Apparent density (Declared value by the manufacturer))	-	600	-
Clause 5 Table 1(v)(Hygroscopicity)	-	1800	-
Clause 5 Table 1(vi)(Water repellency)	-	1200	-
Clause 5 Table 1(vii)(Moisture Content)	-	600	-
Clause 5 Table 1(xii)(Colour)	-	200	-

Complete

IS 15683 (2018)

Portable Fire Extinguishers — Performance and Construction — Specification ( First Revision )

All types and capacities

136100 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 5.3.1(Filling Requirements)	-	600	-
Cl. 5.3.2(Filling Requirements)	-	600	-
Cl. 5.3.2(Filling Requirements)	-	600	-
Cl. 5.3.2(Filling Requirements)	-	600	-
Cl. 5.3.2(Filling Requirements)	-	600	-
Cl. 5.3.2(Filling Requirements)	-	600	-
Cl. 5.3.2(Filling Requirements)	-	600	-
Cl. 5.3.3(Capacities)	-	0	-
Cl. 5.3.3(Capacities)	-	0	-
Cl. 5.3.3(Capacities)	-	0	-
Cl. 5.3.3(Capacities)	-	0	-
Cl. 5.3.3(Capacities)	-	0	-
Cl. 5.3.3(Capacities)	-	0	-
6.1(Determination of Test Pressure)	-	200	-
6.2(Determination of Minimum Burst Pressure)	-	200	-
Cl. 7.1(GENERAL OPERATING PERFORMANCE REQUIREMENTS)	-	500	-
Cl. 7.2 - Table 1(GENERAL OPERATING PERFORMANCE REQUIREMENTS)	-	600	-
Cl. 7.2 - Table 1(GENERAL OPERATING PERFORMANCE REQUIREMENTS)	-	600	-
Cl. 7.3(Resistance to Temperature changes)	-	2200	-
7.4.1.(Retention of charge following partial discharge)	-	600	-
7.4.2(Leakage Test)	-	600	-
Cl 7.5.1(Impact Resistance Test)	-	1200	-
Cl 7.5.2(Vibration Resistance Test)	-	1200	-
7.6.1(External Corrosion Test for all types of extinguishers)	-	6000	-
7.6.1(Internal Corrosion Test Test is applicable only for water based & clean agent PFEs)	-	6000	-
Cl 7.7(Tapping Test)	-	1200	-
Cl 7.8(Intermittent Discharge Test)	-	1500	-
Cl 7.8(Intermittent Discharge Test)	-	1500	-
8.1.1, 8.2.2 a) & 8.3(Class A Fire Test)	-	14000	1A - Rs 14000, 2A- Rs 16000, 3A- Rs 18000, 4A-Rs 27000, 6A-Rs 32000, 10A- Rs 37000, 15A- Rs 51000, 20A - Rs 73000
8.1.2, 8.2.2 b) & 8.4(Class B Fire Test)	-	10000	8B- RS 6000, 13B - RS 8000, 21B - RS 10000, 34B - RS 15000, 55B- RS 37000, 70B -RS 42000, 89B-RS 52000, 113B- RS 57000, 144B- RS 67000, 183B- RS 75000, 233B- RS 85000
8.1.4 & 8.5(Class D Test fire)	-	10000	-
8.1.5, 8.2.2(C) , 8.6, 8.7(Class F Splash Test)	-	5000	5F-RS 5000, 15F-RS 10000, 25F-RS 15000, 75F-RS 25000
8.8(Electrical Conductivity of Extinguishers Discharge )	-	30000	-
9.1(General Requirements of High Pressure Extinguisher)	-	0	-
3.5 & 9.2.1.1(Determination of Service Pressure )	-	200	-
9.2.1.2(Construction requirement for stand vertically upright position)	-	200	-
9.2.1.3(Requirement of Welding)	-	200	-
9.2.1.4(Construction requirement of Neck Ring)	-	200	-
9.2.1.6(Type of threads on parts made of plastic component joining metal parts)	-	200	-
9.2.1.7(Construction requirement for the bottom of the extinguisher)	-	200	-
3.6 & 9.2.1.8(Determination of Maximum Service Pressure )	-	600	-
Cl 9.2.2(Burst Test)	-	3000	-
Cl 9.2.3(Crushing Test)	-	1200	-
Cl 9.2.4(Pressure Cycling Test)	-	3000	-
9.2.5.3, (Measure Thickness of the cylinder)	-	600	-
9.2.6.3 (Measure Thickness of the cylinder (S.S. Body))	-	600	-
9.2.7(Measure Thickness of the cylinder (Aluminium body))	-	600	-
9.2.8(Composite Cylinder)	-	12500	-
Cl 9.3(Carrying Handle)	-	400	-
Cl 9.4(Mounting)	-	500	-
Cl 9.5(Caps, Valves and Closures)	-	1200	-
9.6(Safety Device)	-	600	-
Cl 9.7.1(Requirements for Plastics Components)	-	3500	-
Cl 9.7.2(Requirements for Plastics Components)	-	1600	-
Cl 9.7.3(Requirements for Plastics Components)	-	3500	-
Cl 9.8(Hose Assemblies)	-	200	-
9.8.2(Requirement of hose and coupling system)	-	200	-
9.8.3("Requirement of Burst Pressure of Hose fitted with shut-off nozzle ")	-	1000	-
9.8.3("Requirement of Burst Pressure of Hose fitted with shut-off nozzle for CO2 Fire Extinguisher")	-	1000	-
9.8.4(A hose assembly without a shut-off nozzle shall be capable of withstanding, without leakage, a pressure equal to the extinguisher test pressure i.e Max (1.43 × Pms , 35 bar) held for at least 30 seconds.)	-	1000	-
Cl 9.9 - Table 10(Method of Operation)	-	1200	-
Cl 9.10(Safety-Locking Devices)	-	300	-
9.10.2(Requirement of safety device material)	-	100	-
9.10.3, 9.10.4, 9.10.5 & 9.10.6(Requirement of safety-locking pin or other device)	-	800	-
Cl 9.11.1(Requirements for Pressure Gauges and Indicators for Low-Pressure Extinguishers)	-	500	-
Cl 9.11.2(Calibration Test - Gauges and Indicators)	-	4000	-
Cl 9.11.3(Burst Strength Test — Gauges and Indicators)	-	1000	-
Cl 9.11.4(Water Resistance Test — Gauges and Indicators)	-	3000	-
Cl 9.12(Dip-Tubes and Filters — Water-Based Extinguishers)	-	500	-
Cl 9.13(Horn Test for Carbon Dioxide (CO2) Extinguishers)	-	1500	-
9.14.1(Content of Mono Ammonium Phosphate)	-	2400	-
9.14.2(Content of Sodium Bicarbonate/Potassium Picarbonate for BC Powder)	-	1800	-
9.14.3(Surface Tension of Foam Solution)	-	1200	-
Cl 10(MARKING AND COLOUR)	-	200	-
Cl. 6(PRESSURE REQUIREMENTS FOR LOW PRESSURE EXTINGUISHERS)	-	200	-
Cl. 6(PRESSURE REQUIREMENTS FOR LOW PRESSURE EXTINGUISHERS)	-	200	-
Cl 7.4.3( Leakage Test)	-	600	-
Cl 7.6(Resistance to Corrosion)	-	12000	-
Cl 8.1(Rating Suitability for the Various Classes of Fire)	-	24000	-
Cl 9(CONSTRUCTION REQUIREMENTS)	-	200	-
Cl 9.2.5(Welded Low Carbon Steel Cylinder)	-	600	-
Cl 9.2.6(Stainless Steel Cylinders)	-	600	-
Cl 9.2.7(Aluminium Cylinders)	-	600	-
Cl 9.8(Hose Assemblies)	-	400	-
Cl 9.14(Requirements for Extinguishants Filled in the Extinguisher)	-	5400	-
7.6.2(Internal Corrosion Test for Extinguishers Using Water-Based Medium and Clean Agent)	-	6000	-
Cl 8.6(Electrical Conductivity of Extinguisher Discharge)	-	30000	-

Complete

Exclusion: 9.2.5.1 & 9.2.5.2 (Composition of welded low carbon steel cylinders) 9.2.6.1 & 9.2.6.2 (Carbon composition of stainless steel cylinder) 9.2.1.5 (Cast Analysis Certifcate) 9.2.8.1, 9.2.8.2, 9.2.8.3 (Composite cylinders)

Bureau of Indian Standards

The National Standards Body of India

Advance Firetec and Research Lab Pvt. Ltd

B-3, 2nd floor, Mangolpuri Industrial Area, Phase 2, New Delhi, New Delhi, South West, Delhi, 110034

9971032375 aftrlab24@gmail.com

Scope List