BIS - LIMS (Laboratory Information Management System)

Delta Testing and Research Laboratories Private Limited

Plot No. C-5, Block - C, Main Kanjhawala Road, Rajiv Nagar, Delhi, North West, Delhi, 110086

9811037450 info@deltatestinglab.com

Scope List

Reset

107 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

IS 14735 (1999)

Unplasticized Polyvinyl Chloride (UPVC) Injection Moulded Fittings for Soil and Waste Discharge System for Inside and Outside Buildings Including Ventilation and Rain Water System -

All Grade

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
19(Marking)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
3(Type of Fitting)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
4(Size Designation)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5(Colour of fittings)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1,Table 1(Wall thickness)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.2 ,Table 2&3(Socket Dimensions)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.3(Dimensions of waste trap(Nahani Trap)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8(Sealing Rings)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
10(Workmanship)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
11(Design requirements)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
11.1(Solvent cement type or Rubber ring type)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
11.2(Socket and spigot configeration)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
11.4,Table 5(Vent cowl)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
11.5,Table 6(Pipe Clips)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
12(Physical test requirements)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
12.1(Visual appearance)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
12.2(Stress relief test)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
12.3(Vicat softening tempewrature)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl.13, IS 12235 (P-7)-2004, (Resistance to Sulphuric Acid)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl.14, Annex A(Titanium Di-Oxide Content)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl.15, Annex B(Sulphated Ash Content)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
16(Mechanical Properties)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
16.1(Impact test)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
17(Watet tightness of joint)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
12.4(Effect on water test)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.4(Chamfer)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
11.3(Access Openings)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Table 4(Dimension of Access Openings)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.

21 Aug, 2027

-
Upto 160 mm only

IS 1489 (Part 1) (2015)

Portland pozzolana cement - Specification: Part 1 fly Ash Based

8500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7 -Table 2- vi(Drying Shrinkage- IS 4031 Part 10)	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7 -Table 2- v(Transverse Strength - IS 4031 Part 8 (Optional))	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7 -Table 2- iv- c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7 -Table 2- iv- b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7 -Table 2- iv- a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7 -Table 2-iii- b(Setting Time Final- 4031 Part 5)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7 -Table 2- ii- b(Expansion after aeration- 4031 Part 3)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7 -Table 2- ii- b(Expansion by Autoclave- 4031 Part 3)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7 -Table 2- ii- a(Expansion after aeration - 4031 Part 3)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7 -Table 2- ii- a(Expansion by Le Chatelier- 4031 Part 3)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7 -Table 2- i(Fineness 4031 Part 2)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6 - Table - 1 vi( Alkali content as (Na2O + 0.658 K2O) - Cl 4.11 of IS 4032:1985)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6 - Table - 1 v(Chloride content - Cl 4.13 of IS 4032:1985)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6 - Table - 1 iv(Loss on ignition - Cl 7.1 of IS 4032:1985)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6 - Table - 1 iii(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 7.3 of IS 4032:1985)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6 - Table - 1 ii(Magnesia - Cl 7.2 of IS 4032:1985)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6 - Table - 1 i(Insoluble residue - Cl 7.4 of IS 4032:1985)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6 - Table - 1 vi( Alkali content as (Na2O + 0.658 K2O) - Cl 4.11 of IS 4032:1985)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6 - Table - 1 v(Chloride content - Cl 4.13 of IS 4032:1985)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6 - Table - 1 iv(Loss on ignition - Cl 7.1 of IS 4032:1985)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6 - Table - 1 iii(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 7.3 of IS 4032:1985)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6 - Table - 1 ii(Magnesia - Cl 7.2 of IS 4032:1985)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6 - Table - 1 i(Insoluble residue - Cl 7.4 of IS 4032:1985)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7 -Table 2- vi(Drying Shrinkage- IS 4031 Part 10)	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7 -Table 2- v(Transverse Strength - IS 4031 Part 8 (Optional))	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7 -Table 2- iv- c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7 -Table 2- iv- b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7 -Table 2- iv- a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7 -Table 2-iii- b(Setting Time Final- 4031 Part 5)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7 -Table 2- iii- a(Setting Time Initial- 4031 Part 5)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7 -Table 2- ii- b(Expansion after aeration- 4031 Part 3)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7 -Table 2- ii- b(Expansion by Autoclave- 4031 Part 3)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7 -Table 2- ii- a(Expansion after aeration - 4031 Part 3)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7 -Table 2- ii- a(Expansion by Le Chatelier- 4031 Part 3)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7 -Table 2- i(Fineness 4031 Part 2)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6 - Table - 1 vi( Alkali content as (Na2O + 0.658 K2O) - Cl 4.11 of IS 4032:1985)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6 - Table - 1 v(Chloride content - Cl 4.13 of IS 4032:1985)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6 - Table - 1 iv(Loss on ignition - Cl 7.1 of IS 4032:1985)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6 - Table - 1 iii(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 7.3 of IS 4032:1985)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6 - Table - 1 ii(Magnesia - Cl 7.2 of IS 4032:1985)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6 - Table - 1 i(Insoluble residue - Cl 7.4 of IS 4032:1985)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6 - Table - 1 vi( Alkali content as (Na2O + 0.658 K2O) - Cl 4.11 of IS 4032:1985)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6 - Table - 1 v(Chloride content - Cl 4.13 of IS 4032:1985)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6 - Table - 1 iv(Loss on ignition - Cl 7.1 of IS 4032:1985)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6 - Table - 1 iii(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 7.3 of IS 4032:1985)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6 - Table - 1 ii(Magnesia - Cl 7.2 of IS 4032:1985)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6 - Table - 1 i(Insoluble residue - Cl 7.4 of IS 4032:1985)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 7 Table 2 SI No. (v) (Compressive strength of Transverse Specimen, 672 ± 4 h)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 7 Table 2 SI No. (v) (Compressive strength of Transverse Specimen, 168 ± 2 h)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 7 Table 2 SI No. (v) (Compressive strength of Transverse Specimen, 72 ± 1 h)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 7 Table 2 SI No. (v) (Transverse Strength, 672 ± 4 h)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 7Table 2 SI No. (v)(Transverse Strength, 168 ± 2 h)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 7Table 2 SI No. (v)(Transverse Strength, 72 ± 1 h)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
11(Marking)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
4(RAW MATERIAL)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
11(MARKING)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7 -Table 2- iii- a(Setting Time Initial- 4031 Part 5)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.

21 Aug, 2027

-
-

IS 12818 (2010)

Unplasticized polyvinyl chloride (Pvc - U) screen and casing pipes for bore/tubewells - Specification (Second Revision)

All Grade

16000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
9.6(Vicat Softening Temperature IS 12235 (Part 2).)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9.5(Tensile Strength IS 12235(Part 13))	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9.4 and Table 14(Resistance to External Blows at 0 ?C IS 12235 (Part 9))	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9.3(Density IS 12235 (Part 14))	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9.2(Internal Diameter)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9.1( Visual Appearance)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9.1(Visual Appearance)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.4.1 and Table 13 Fig 3B & 4B(Dimensions of sealing elements)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.4.1 and Table 13 Fig 3B & 4B(Dimensions of sealing elements)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.4.1 and Table 13 Fig 3B & 4B(Dimensions of sealing elements)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.4.1 and Table 13 Fig 3B & 4B(Dimensions of sealing elements)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.4.1 and Table 13 Fig 3B & 4B(Dimensions of sealing elements)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.4.1 and Table 13 Fig 3B & 4B(Dimensions of sealing elements)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.4.1 and Table 13 Fig 3B & 4B(Dimensions of sealing elements)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.4(Sealing rings - Hardness)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.1 to 8.3 and Table 11 &12 Fig 3A & 4A(THREADING OF SCREEN ANDCASING PIPES. IS 554.)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.1 to 8.3 and Table 11 &12 Fig 3A & 4A(THREADING OF SCREEN ANDCASING PIPES. IS 554.)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.5 and Table 10 Fig 2A & 2B(Approximate Free Passage Area, in Percent (Mean Value) for Width of Slot (w))	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.5 and Table 10 Fig 2A & 2B(Minimum number of slots on the circumference of the cross-section.)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.5 and Table 10 Fig 2A & 2B(Summation of slot lengths over internal circumference of the cross- section.)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.4 Table 8 & 9 Fig 1(Segmental length, l5)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.4 Table 8 & 9 Fig 1(Segmental length, l4)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.4 Table 8 & 9 Fig 1(Segmental length, l3)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.4 Table 8 & 9 Fig 1(Effective length, l2)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.3.2(Rib height)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.3.1(No.of Ribs)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.2 and Table 5, 6 & 7 Fig 1B(Wall thickness, Max)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.2 and Table 5, 6 & 7 Fig 1B(Wall thickness, Min)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.2 and Table 5, 6 & 7 Fig 1B(Mean Outer Diameter over Connection)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.2 and Table 5, 6 & 7 Fig 1B(Outer Diameter at any point, Max)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.2 and Table 5, 6 & 7 Fig 1B(Outer Diameter at any point , Min)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.2 and Table 5, 6 & 7 Fig 1B(Mean Outer Diameter of Pipe , Max)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.2 and Table 5, 6 & 7 Fig 1B(Mean Outer Diameter of Pipe, Min)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.2 and Table 5, 6 & 7 Fig 1B(Nominal Diameter)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.2 and Table 5, 6 & 7 Fig 1B(DIMENSIONS - Casing Pipes)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1 and Table 1, 2, 3, & 4 Fig 1A & 1B(Wall thickness)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1 and Table 1, 2, 3, & 4 Fig 1A & 1B(Mean Outer Diameter over Connection)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1 and Table 1, 2, 3, & 4 Fig 1A & 1B(Outer Diameter at any point )	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1 and Table 1, 2, 3, & 4 Fig 1A & 1B(Mean Outer Diameter of Pipe)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1 and Table 1, 2, 3, & 4 Fig 1A & 1B(Nominal Diameter)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
4.1.2 (Ref. Cl 11 of IS 4669)(Composition -Sulphated ash content )	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
4.1.2 (Ref. Cl 5.1. of IS 4669)(Composition - Loss on heating )	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
4.1.1 (Ref. 3.4.1. of IS 10151)(Composition - The monomer content (VCM content) in the resin - Annex A ofIS 10151)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5(COLOUR)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.4(Sealing elements a. Elastomeric material b. Shore A hardness of sealing Elements )	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.4(Width b)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.3.1 & 8.3.2 (Threading of casing pipe (from 100 to 200 DN Table – 11 & Fig. 3A) & (from 250 to 400 DN Table – 12 & Fig. 4A) Outside diameter d1(+0, -0.3) d2 d3 D1 (+0.3, -0) D2 D4 D5 (+0.3, -0) Z h3 (+0, -0.1) H4 (+0, -0.1) )	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.2(Threading of casing pipe As per IS 554 (from 40 to 80mm DN) Number of threads in 25.4mm Pitch (P) Height of thread (h) Major (Gauge Diameter) d Pitch(d2) Minor (d1) External Thread gauge length Nominal No. of turns of thread max min )	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.5.1 7.5.2 (Slot Dimension (Table 10) Fig 2A & 2B a. Minimum number of slot on the circumference b. Σa±5% c. Mean value of approximate free passage area (%) for width of slot (w) d. Tolerance on width of slot (w) e. Width of material between slot (b))	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5.0(Colour of Pipes)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9.7(Effect on Water a) Lead (first extraction) b) Lead (Third extraction) c) Dialkyl Tin C4 & higher homologues measured as Tin (Third extraction) d) Cadmium (All three extracts) e) Mercury (All three extracts) f) Other Toxic Substances )	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
4.1.2(K-Value as per IS-4669)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
4.1.1 (VCM Content as per IS 10151 (Annex A))	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1(Screen Pipes)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
11(Marking)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5.1(Materials)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8(Packing)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
4.1.3(Cross Chain Length)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.2(Link Twisted (Cross chain))	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.3(The Basic chains)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.9(Case Depth)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8(Marking)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.

21 Aug, 2027

-
Upto 400 mm only

IS 13801 (2013)

Chequered Cement Concrete Tiles -

All Grade/Type/Size Designation

6800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
(Cl 7, 8 &9)(Length, Breadth, Thickness, Difference in length of side between the longest side and shorterst side in the sample shall not exceed 1 mm, Half tiles, Difference in Thickness between the thickest and thinnest tile in the sample shall not exceed 10 percent of minimum thickness, Depth of chequred groove, Thickness of wearing layer.)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 12.1(Concavity & Convexity )	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 12.2(Longest gap between the arms of the square and the edge of the title shall not exceed 2 percent of the length.)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 12.3(Shall not exceed 1 percent of the length of the edge.)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 12.4(Water absorption)	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 12.5(Wet transverse strength)	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 12.6(Resistance to wear)	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 11(Finish)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Annex G3.1(Aluminium oxide content)	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
(Cl 7, 8 &9)(Length, Breadth, Thickness, Difference in length of side between the longest side and shorterst side in the sample shall not exceed 1 mm, Half tiles, Difference in Thickness between the thickest and thinnest tile in the sample shall not exceed 10 percent of minimum thickness, Depth of chequred groove, Thickness of wearing layer.)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 12.1(Concavity & Convexity )	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 12.2(Longest gap between the arms of the square and the edge of the title shall not exceed 2 percent of the length.)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 12.3(Shall not exceed 1 percent of the length of the edge.)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 12.4(Water absorption)	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 12.5(Wet transverse strength)	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 12.6(Resistance to wear)	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 11(Finish)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
(Cl 7, 8 &9)(Length, Breadth, Thickness, Difference in length of side between the longest side and shorterst side in the sample shall not exceed 1 mm, Half tiles, Difference in Thickness between the thickest and thinnest tile in the sample shall not exceed 10 percent of minimum thickness, Depth of chequred groove, Thickness of wearing layer.)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 12.1(Concavity & Convexity )	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 12.2(Longest gap between the arms of the square and the edge of the title shall not exceed 2 percent of the length.)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 12.3(Shall not exceed 1 percent of the length of the edge.)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 12.4(Water absorption)	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 12.5(Wet transverse strength)	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 12.6(Resistance to wear)	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 11(Finish)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 11(Finish)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 12.6(Resistance to wear)	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 12.5(Wet transverse strength)	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 12.4(Water absorption)	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 12.3(Shall not exceed 1 percent of the length of the edge.)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 12.2(Longest gap between the arms of the square and the edge of the title shall not exceed 2 percent of the length.)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 12.1(Concavity & Convexity )	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
(Cl 7, 8 &9)(Length, Breadth, Thickness, Difference in length of side between the longest side and shorterst side in the sample shall not exceed 1 mm, Half tiles, Difference in Thickness between the thickest and thinnest tile in the sample shall not exceed 10 percent of minimum thickness, Depth of chequred groove, Thickness of wearing layer.)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
8.3(Thickness of wearing layer)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.

21 Aug, 2027

-
-

IS 1237 (2012)

Cement Concrete Flooring Tiles - Specification

All Grade/Type/Size Designation

4500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 7.1(Length, Breadth, Minimum thickness, Difference in length of side between the longest side and shorterst side, Half tiles, Difference in Thickness between the thickest and thinnest tile, Thickness of wearing layer)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 12.2(Concavity & Convexity )	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 12.3(The Maximum gap between the arms of the square and the edge of the title shall notexceed 2 percent of the length.)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 12.4(Shall not exceed 1 percent of the length of the edge.)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 12.5(Water absorption)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 12.6(Wet transverse strength )	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 12.7(Resistance to wear)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 11(Suface Finish)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 7.1(Length, Breadth, Minimum thickness, Difference in length of side between the longest side and shorterst side, Half tiles, Difference in Thickness between the thickest and thinnest tile, Thickness of wearing layer)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 12.2(Concavity & Convexity )	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 12.3(The Maximum gap between the arms of the square and the edge of the title shall notexceed 2 percent of the length.)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 12.4(Shall not exceed 1 percent of the length of the edge.)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 12.5(Water absorption)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 12.6(Wet transverse strength )	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 12.7(Resistance to wear)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 11(Suface Finish)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 7.1(Length, Breadth, Minimum thickness, Difference in length of side between the longest side and shorterst side, Half tiles, Difference in Thickness between the thickest and thinnest tile, Thickness of wearing layer)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 12.2(Concavity & Convexity )	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 12.3(The Maximum gap between the arms of the square and the edge of the title shall notexceed 2 percent of the length.)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 12.4(Shall not exceed 1 percent of the length of the edge.)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 12.5(Water absorption)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 12.6(Wet transverse strength )	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 12.7(Resistance to wear)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 11(Suface Finish)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 7.1(Length, Breadth, Minimum thickness, Difference in length of side between the longest side and shorterst side, Half tiles, Difference in Thickness between the thickest and thinnest tile, Thickness of wearing layer)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 12.2(Concavity & Convexity )	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 12.3(The Maximum gap between the arms of the square and the edge of the title shall notexceed 2 percent of the length.)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 12.4(Shall not exceed 1 percent of the length of the edge.)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 12.5(Water absorption)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 12.6(Wet transverse strength )	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 12.7(Resistance to wear)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 11(Suface Finish)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 7.1(Length, Breadth, Minimum thickness, Difference in length of side between the longest side and shorterst side, Half tiles, Difference in Thickness between the thickest and thinnest tile, Thickness of wearing layer)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 12.2(Concavity & Convexity )	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 12.3(The Maximum gap between the arms of the square and the edge of the title shall notexceed 2 percent of the length.)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 12.4(Shall not exceed 1 percent of the length of the edge.)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 12.5(Water absorption)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 12.6(Wet transverse strength )	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 12.7(Resistance to wear)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 11(Suface Finish)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 7.1(Length, Breadth, Minimum thickness, Difference in length of side between the longest side and shorterst side, Half tiles, Difference in Thickness between the thickest and thinnest tile, Thickness of wearing layer)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 12.2(Concavity & Convexity )	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 12.3(The Maximum gap between the arms of the square and the edge of the title shall notexceed 2 percent of the length.)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 12.4(Shall not exceed 1 percent of the length of the edge.)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 12.5(Water absorption)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 12.6(Wet transverse strength )	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 12.7(Resistance to wear)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 11(Suface Finish)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 11(Suface Finish)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 12.7(Resistance to wear)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 12.6(Wet transverse strength )	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 12.5(Water absorption)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 12.4(Shall not exceed 1 percent of the length of the edge.)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 12.3(The Maximum gap between the arms of the square and the edge of the title shall notexceed 2 percent of the length.)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 12.2(Concavity & Convexity )	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 7.1(Length, Breadth, Minimum thickness, Difference in length of side between the longest side and shorterst side, Half tiles, Difference in Thickness between the thickest and thinnest tile, Thickness of wearing layer)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.

21 Aug, 2027

-
-

IS 3812 : Part 2 (2013)

Pulverized Fuel Ash - Part 2 : For Use as Admixture in Cement Mortar and Concrete

6500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1, 6.1, Table 1(Silicon dioxide (SiO2 ) plus aluminium oxide (Al2O3 ) plus iron oxide (Fe2O3 ))	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5.1, 6.1, Table 1(Silicon dioxide (SiO2 ))	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5.1, 6.1, Table 1(Magnesium oxide (MgO)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5.1, 6.1, Table 1(Total sulphur as sulphur trioxide (SO3)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5.1, 6.1, Table 1(Available alkalies as equivalent sodium oxide (Na2O))	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5.1, 6.1, Table 1(Total chlorides)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5.1, 6.1, Table 1(Loss on ignition)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.2(moisture content)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1, Table 1(Fineness — Specific surface in m2 /kg)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1, Table 1(Particles retained on 45 micron IS sieve (wet sieving))	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1, Table 1(Soundnes)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.2(Uniformity Requirements)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.3(Independent Testing)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
11.1(Supplies of pulverized fuel)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
11.2(Tolerance Requirements for the Quantity of Pulverized Fuel Ash Packed in Bags)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clauses 5.1 & 7.1 Table No. 2, SI No. (iii) (Soundness by autoclave test - Expansion of specimen)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clauses 5.1 & 7.1 Table No. 2, SI No. (ii) (Particles retained on 45 micron IS Sieve (we sieving))	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clauses 5.1 & 7.1 Table No. 2, SI No. (i) (Fineness- Specific surface by blaine's method)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clase No.7.1, Table No.2, Sl.No.i(Fineness-Specific surface by Blaine's permeability method)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clase No.7.1, Table No.2, Sl.No.ii(Particle retained on 45 micron IS sieve (wet sieving))	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clase No.7.1, Table No.2, Sl.No.iii(Soundness by autoclave tests)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.

21 Aug, 2027

-
-

IS 12786 (1989)

Irrigation equipment - Polyethylene pipes for irrigation laterals - Specification

All Grade

14500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1.a (Potyethylene - higher olefins constituent )	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
4.1.b(Potyethylene - anti-oxidant)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
4.1.c.i (Density)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
4.1.c.ii (Toluene extract - Annex A)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
4.1.c.iii (Volatile matter - Annex B )	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
4.1.c & 4.2.a (Carbon Black content - IS 2530 : 1963)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
4.2.b (The dispersion of Carbon Black content shall be satisfactory - IS 2530 : 1963)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
4.3(Addition of not more than 10 percent of the manufactures own rework material produced during the manufacture and works testing of pipe complying with this standard is permitted. No other rework material shall be used)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.3(Tensile Test)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.3(Elongation at Break)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.4(SusceptibiIity to Environmental Stress Cracking)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5 and Table 1(DIMENSIONS OF PIPES - outside diameters)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5 and Table 1(DIMENSIONS OF PIPES - wall thickness shall)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.2(Reversion Test)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5 and Table 1(DIMENSIONS OF PIPES - outside diameters)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5 and Table 1(DIMENSIONS OF PIPES - wall thickness shall)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.2(Reversion Test)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5 and Table 1(DIMENSIONS OF PIPES - outside diameters)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5 and Table 1(DIMENSIONS OF PIPES - wall thickness shall)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.2(Reversion Test)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1(Hydraulic Characteristics)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1(Hydraulic Characteristics)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.1(Visual Appearance)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
3.1(Class of Pipe)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9.0 (9.1)(Minimum Internal Diameter of Coil)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9.0 (9.1)(Coiling )	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.0 (8.1) (Supply of pipes )	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1 Table-2 (b)Acceptance Test for 01 hour at 20°C & 6.9MPa induced stress)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1 Table-2 (Hydraulic Characteristics a)Quality Test for 100 hours at 70°C & 2.5.MPa induced stress. )	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.0 (6.1) (Visual appearance)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5.0 5.1 (Table1) (c)Wall thickness of pipe Maximum)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5.0 5.1 (Table1) (c)Wall thickness of pipe Minimum)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5.0 5.1 (Table1) (b)Tolerance on OD)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5.0 5.1 (Table1) (Dimensions a)Outside diameter of pipe)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 4.2(Carbon Black Content)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 4.2(Carbon Black Dispersion)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 5.0 & 5.1 Table -1(Outside Diameter)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 5.0 & 5.1 Table -1(,Tolerence,)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 5.0 & 5.1 Table -1(Wall Thckness)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 7.1 Table -2(Quality Test for 100 hrs @ 70 c & 2.2 Mpa)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 7.3(Tensile Test)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 7.3(Elongation)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 8.0- 8.1(Supply of pipes)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 9.0 - 9.1(Minimum Internal Diameter of Coil)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
4.1.c(iv)(MATERIAL)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
4.1d(MATERIAL)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
4.2a(Carbon Black Content)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.4(SusceptibiIity to Environmental Stress)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
4(MATERIAL)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5.1(Diameters and wall thicknesses)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6(VISUAL APPEARANCE)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1(Hydraolic Characteristics)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.2(Reversion Test)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.3(Tensile Test)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.3.1(Test Piece)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.3.2(Procerdure)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.4(SusceptibiIity to Environmental Stress Cracking)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8(SUPPLY OF PIPES)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9(COILING)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
11(Marking)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 7.1 Table -2(Acceptance Test for 1 hrs @ 27 c & 6.9 Mpa)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.

21 Aug, 2027

-
Upto 32 mm only

IS 3812 (Part 1) (2013)

Pulverized fuel ash - Specification: Part 1 For use as pozzolana in cement, cement mortar and concrete

11000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 6.1, Table 1 - i(Silicon dioxide (SiO2) plus aluminium oxide (Al2O3) plus ironoxide (Fe2O3) - IS 1727)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 6.1, Table 1 - ii(Silicon dioxide (SiO2) - IS 1727)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 6.1, Table 1 - iii(Reactive Silica - Annex B)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 6.1, Table 1 - iv(Magnesium oxide (MgO) - IS 1727)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 6.1, Table 1 - v( Total sulphur as sulphur trioxide (SO3) - IS 1727)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 6.1, Table 1 - vi( Available alkalis as equivalent sodium oxide (Na2O) - Annex C)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 6.1, Table 1 - vii( Total Chlorides - IS 4032)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 6.1, Table 1 - viii( Loss on ignition - IS 1727)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 6.2(Moisture content of the fly ash when supplied in dry condition - Annex D)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1-Table 2(i)(PHYSICAL REQUIREMENTS-Fineness)	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1-Table 2(ii)(PHYSICAL REQUIREMENTS-Particles retained on 45 micron IS sieve)	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1-Table 2(iii)(PHYSICAL REQUIREMENTS-Average compressive strength)	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1-Table 2(iv)(PHYSICAL REQUIREMENTS-Compressive strength at 28 days)	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1-Table 2(v)(PHYSICAL REQUIREMENTS-Soundness by autoclave test )	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.2(Uniformity Requirements)	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5.1, 7.1, table-2, iii(Lime reacitivity)	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5.1&7.1, table-2 (III)(Lime Reactivity)	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5.1, 7.1, table-2, iii(Lime reacitivity)	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.

21 Aug, 2027

-
-

IS 12701 (1996)

Rotational moulded polyethylene water storage tanks - specification (First Revision)

16000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2.3(Carbon Black Content )	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
4.2.3(Carbon Dispersion Test)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5(Types and Features )	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5.2 Table 2(Dimensions of Rectangular Loft Tanks)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5.2 Table 2(Dimensions of Rectangular Loft Tanks)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5.2 Table 2(Dimensions of Rectangular Loft Tanks)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5.2 Table 2(Dimensions of Rectangular Loft Tanks)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5.2 Table 2(Dimensions of Rectangular Loft Tanks)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5.2 Table 2(Dimensions of Rectangular Loft Tanks)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5.2 Table 2(Dimensions of Rectangular Loft Tanks)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5.2 Table 2(Dimensions of Rectangular Loft Tanks)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5.3(Types and Features )	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5.6(Types and Features )	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.1(Finish)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1.1(Resistance to Deformation)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1.2(Resistance to Deformation)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.2(Resistance to Impact)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.3(Test for Top Load Resistance)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.4(Tensile Strength)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.5(Flexural Modulus)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.6(overall Migration)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9.2.1(Man-Hole and Hand-Hole Lids)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9.2(Man-Hole and Hand-Hole Lids)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9.1(Man-Hole and Hand-Hole Lids)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9.1(Lid Thickness)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.3(Test for Top Load Resistance)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.1(Finish)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5.4(Wall Thickness above effective height)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5.2 Table 2 (7)(Minimum Wall Thickness)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5.1 Table 1 (7)(Minimum Weight of Tank (Without Lid))	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
4.2.1(Density)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
4.2.2(MFI)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.6(overall Migration)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
4.1(MATERIALS)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
4.2.2(MFR)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
4.2.1(Density)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5.4(Wall Thickness)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
10(MARKING)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-7.6(Overall Migration)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.

21 Aug, 2027

-
Upto 5000 Ltr. Capacity only

100

IS 14333 (2022)

Polyethylene Pipes for Sewerage and Industrial Chemicals and Effluent ï¿½ Specification (First Revision)

All type of Grade/Type/Size/Designation

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.2.1,T2("Base Density (At 27°C Temp.)-IS 7328:2020 ")	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5.2.1,T2(Melt Flow Rate (At 190°C /5kg)-IS 2530:1963)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5.2.1,T2(Thermal Stability(Oxidation Induction Time)-IS 4984:2016(Annexure-B))	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5.2.1,T2("Volatile Matter- IS 4984:2016 (Annexure-C)")	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5.2.1,T2("Water Content-IS 4984:2016 (Annexure-D)")	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5.2.1.1, T2(Compound Density-IS 7328:2020)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5.2.1.1, T2("Compound carbon black -IS 2530:1963 content")	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5.2.1.1, T2(Compound Toluene extract - Any Method)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5.2.1.1, T2(Compound maximum volatile matter -IS 4984:2016 (Annexure-C))	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5.2.1.1, T2(Compound carbon black particle size- Any Method)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5.2.1.1, T2(Compound ash content - Any Method)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5.2.1.1, T2("Compound carbon black -IS 2530:1963 dispersion")	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5.3(Density of Higher olefin - IS 7328:2020)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5.3(Olefin Constituents- 14333-2022)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5.3(Loading of Carbon Black - IS 2530:1963)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5.3(Ash content- Any Method)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5.3(Toluene extract - Any Method)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5.3("Maximum volatile matter -IS 4984:2016 (Annexure-C)")	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5.3(Carbon black particle size - Any Method)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5.4(Antioxidant - Any Method)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6(Pipe Description - IS 14333-2022)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.2(Colour- IS 14333-2022)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1(Visual Appearance- IS 14333-2022)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.2(Length- IS 14333-2022)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.3(Coiling- IS 14333-2022)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.4,T3 of IS 4984(Outside Diameter-IS 4984-2016)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.4,T4 of IS 4984(wall Thickness-IS 4984-2016)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.4,T3 of IS 4984(Ovality-IS 4984-2016)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.1.1, T4(Internal Pressure creep Rupture test, Temperature - 27 oC , Test Period - 100 hrs.-IS 4984-2016 (Annexure-E))	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.1.1, T4(Internal Pressure creep Rupture test, Temperature - 80 oC , Test Period - 48 hrs.-IS 4984-2016 (Annexure-E))	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.1.1, T4(Internal Pressure creep Rupture test, Temperature - 80 oC , Test Period - 165 hrs.-IS 4984-2016 (Annexure-E))	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.1.1, T4(Internal Pressure creep Rupture test, Temperature - 80 oC , Test Period - 1000 hrs.-IS 4984-2016 (Annexure-E))	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.1.2, T4(Internal Pressure creep Rupture test, Temperature - 80 oC , Test Period - 48 hrs.-IS 4984-2016 (Annexure-E))	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.2("Longitudinal Reversion Test - IS 4984-2016 (Annexure-F)")	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.3(Carbon black content- IS 2530-1963)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.3(Carbon black content Dispersion- IS 2530-1963)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.4(Melt Flow rate(Temperature - 190oC,Mass 5kg)-IS 2530-1963)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.5(Oxidation Induction Time -IS 4984:2016(Annexure-B))	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.6(Density-IS 7328:2020)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.7("Tensile Strength for Butt Fusion - IS 4984-2016 (Annexure-G)")	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.8,T5("Tensile - IS 4984-2016 (Annexure-H)")	-	1000	-
8.8,T5("Elongation -IS 4984-2016 (Annexure-H)")	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.9(Slow Crack Growth Rate{Internal Pressure creep Rupture test, Temperature - 80±1 oC , Test Pressure – 0.80MPa, Test Period - 500 hrs.-IS 4984-2016 (Annexure-E &J))	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.

21 Aug, 2027

-
Upto 630 mm only

101

IS 2185 : Part 3 (1984)

Concrete Masonry Units Part 3 Autoclaved Cellular Aerated Concrete Blocks

All Grade/Type/Size Designation

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8(Physical requirments)	-	500	10 % Discount to BIS and for others 1.5 times on mentioned testing charges.
8.2(Physical requirments-Dimensions-Length)	-	1000	10 % Discount to BIS and for others 1.5 times on mentioned testing charges.
8.2(Physical requirments-Dimensions-Height)	-	1000	10 % Discount to BIS and for others 1.5 times on mentioned testing charges.
8.2(Physical requirments-Dimensions-Width)	-	1000	10 % Discount to BIS and for others 1.5 times on mentioned testing charges.
8.3(Physical requirments- Block density)	-	5000	10 % Discount to BIS and for others 1.5 times on mentioned testing charges.
8.4(Physical requirments- Compressive strength)	-	5000	10 % Discount to BIS and for others 1.5 times on mentioned testing charges.
8.5(Thermal Conductivity)	-	10000	10 % Discount to BIS and for others 1.5 times on mentioned testing charges.
8.6( Drying Shrinkage )	-	5000	10 % Discount to BIS and for others 1.5 times on mentioned testing charges.
8.4, 9.2 & 11.3(Indivisual Moisture Content)	-	5000	10 % Discount to BIS and for others 1.5 times on mentioned testing charges.
8.4, 9.2 & 11.3(Indivisual Bulk density)	-	5000	10 % Discount to BIS and for others 1.5 times on mentioned testing charges.
8.4, 9.2 & 11.3 & Table 1(Indivisual Compressive strength)	-	5000	10 % Discount to BIS and for others 1.5 times on mentioned testing charges.
8.3 & 9.1(Indivisual Moisture Content)	-	5000	10 % Discount to BIS and for others 1.5 times on mentioned testing charges.
8.3 & 9.1 Table 1(Indivisual Block Density)	-	5000	10 % Discount to BIS and for others 1.5 times on mentioned testing charges.
3.2 & 8.2(Indivisual Height)	-	1000	10 % Discount to BIS and for others 1.5 times on mentioned testing charges.
3.2 & 8.2(Indivisual Width)	-	1000	10 % Discount to BIS and for others 1.5 times on mentioned testing charges.
3.2 & 8.2(Indivisual Length)	-	1000	10 % Discount to BIS and for others 1.5 times on mentioned testing charges.
8.6, 9.4 & 11.5(Grade)	-	500	10 % Discount to BIS and for others 1.5 times on mentioned testing charges.
3.4(Special Faces)	-	500	10 % Discount to BIS and for others 1.5 times on mentioned testing charges.
3.3(Faces & Arises)	-	500	10 % Discount to BIS and for others 1.5 times on mentioned testing charges.
3.1(Shape)	-	500	10 % Discount to BIS and for others 1.5 times on mentioned testing charges.
8.1.1(General (Exposed wall construction))	-	500	10 % Discount to BIS and for others 1.5 times on mentioned testing charges.
5(MA TEIUA.LS)	-	500	10 % Discount to BIS and for others 1.5 times on mentioned testing charges.
7(SURI'ACE TUTUU AND FINISH)	-	500	10 % Discount to BIS and for others 1.5 times on mentioned testing charges.
9.3(Thermal Conductivity)	-	5000	10 % Discount to BIS and for others 1.5 times on mentioned testing charges.
15(Marking)	-	500	10 % Discount to BIS and for others 1.5 times on mentioned testing charges.

21 Aug, 2027

-
-

102

IS 2185 : Part 2 (1983)

Specification for concrete masonry units: Part 2 hollow and solid lightweight concrete blocks (First Revision)

All Grade/Type/Size Designation

17500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.7(Moisture Movement)	-	2500	10 % Discount to BIS and for others 1.5 times on mentioned testing charges.
8.6(Drying shrinkage)	-	2500	10 % Discount to BIS and for others 1.5 times on mentioned testing charges.
8.5, Table 1(Water Absorption)	-	2500	10 % Discount to BIS and for others 1.5 times on mentioned testing charges.
8.4, Table 1(Compressive strength)	-	5000	10 % Discount to BIS and for others 1.5 times on mentioned testing charges.
8.3(Block Density)	-	2000	10 % Discount to BIS and for others 1.5 times on mentioned testing charges.
3.2.5(Thickness of Web)	-	1000	10 % Discount to BIS and for others 1.5 times on mentioned testing charges.
3.2.5(Face Shell Thickness)	-	1000	10 % Discount to BIS and for others 1.5 times on mentioned testing charges.
3.2(Width)	-	1000	10 % Discount to BIS and for others 1.5 times on mentioned testing charges.
3.2(Height)	-	1000	10 % Discount to BIS and for others 1.5 times on mentioned testing charges.
3.2(Length)	-	1000	10 % Discount to BIS and for others 1.5 times on mentioned testing charges.
8.1(General)	-	500	10 % Discount to BIS and for others 1.5 times on mentioned testing charges.
8.2(Deimension (Length))	-	1000	10 % Discount to BIS and for others 1.5 times on mentioned testing charges.
8.2(Deimension (Height))	-	1000	10 % Discount to BIS and for others 1.5 times on mentioned testing charges.
8.2(Deimension (Width))	-	1000	10 % Discount to BIS and for others 1.5 times on mentioned testing charges.
8.3(Block Density)	-	2000	10 % Discount to BIS and for others 1.5 times on mentioned testing charges.
8.4(Compressive Strength)	-	5000	10 % Discount to BIS and for others 1.5 times on mentioned testing charges.
8.5(Water Absorption)	-	2500	10 % Discount to BIS and for others 1.5 times on mentioned testing charges.
8.6(Drying Shrinkage)	-	2500	10 % Discount to BIS and for others 1.5 times on mentioned testing charges.
8.7(Moisture Movement)	-	2500	10 % Discount to BIS and for others 1.5 times on mentioned testing charges.

21 Aug, 2027

-
-

103

IS 13592 (2013)

Unplasticized Polyvinyl Chloride (PVC-U) Pipes for Soil and Waste Discharge System Inside and Outside Buiildings Including Ventilation and Rainwater System

13500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.5(Surface colour of the pipes shall be dark shade of grey)	-	200	10% Discount to BIS for others 1.5 times of mentioned testing charges.
Cl6.3(The composition shall be based on PVC resin having a K-value of 64 or greater when tested in accordance with IS 4669)	-	2500	10% Discount to BIS for others 1.5 times of mentioned testing charges.
Cl.7.1(Mean outside diameter, outside diameter at any point for Type A and Type B pipes manufactured plain or with socket shall be as given in Table 1. Dimensions shall be measured according to the method given in IS 12235 (Part 1).)	-	500	10% Discount to BIS for others 1.5 times of mentioned testing charges.
Cl.7.1( outside diameter at any point for Type A and Type B pipes manufactured plain or with socket shall be as given in Table 1. Dimensions shall be measured according to the method given in IS 12235 (Part 1).)	-	500	10% Discount to BIS for others 1.5 times of mentioned testing charges.
Cl.7.1( wall thickness at any point for Type A and Type B pipes manufactured plain or with socket shall be as given in Table 1. Dimensions shall be measured according to the method given in IS 12235 (Part 1).)	-	500	10% Discount to BIS for others 1.5 times of mentioned testing charges.
Cl.7.2(Pipes shall be supplied in nominal lengths of 2, 3, 4 or 6 metres either plain or with socket for solvent cementing/grooved socket. Tolerances on specified length shall be + 10 mm and – 0 mm.The nominal length of the pipe with socket for solvent cementing/grooved socket shall be as given in Fig. 1.)	-	500	10% Discount to BIS for others 1.5 times of mentioned testing charges.
Cl.7.3.1(Minimum wall thickness of socket on pipes shall be as given in Table 2 read with Fig. 2 and Fig. 3.)	-	500	10% Discount to BIS for others 1.5 times of mentioned testing charges.
Cl.7.3.2(Dimensions of sockets for solvent cementing and grooved sockets of pipes shall be as given in Tables 3 and 4 respectively, read with Fig. 2 and 3.)	-	500	10% Discount to BIS for others 1.5 times of mentioned testing charges.
Cl.8.1(The internal and external surface of the pipes shall be smooth and clean, and free from grooving and other defects. The end shall be clearly cut and shall be square with the axis of the pipe. The end may be chamfered on the plain side.)	-	500	10% Discount to BIS for others 1.5 times of mentioned testing charges.
Cl.8.2(When tested by the method described in IS 12235 (Part 5), a length of pipe sample of 200 ± 20 mm shall not alter in length by more than 5 percent. In the case of socket ended pipes, this test shall be carried out on the plain portion of pipe taken at least 100 mm away from the root of the socket.)	-	1000	10% Discount to BIS for others 1.5 times of mentioned testing charges.
Cl8.3(This test shall be carried out for socket end pipes only. When tested by the method described in IS 12235 (Part 6), the test specimens shall not show blisters, excessive delamination or cracking or signs of weld line splitting.)	-	500	10% Discount to BIS for others 1.5 times of mentioned testing charges.
Cl.8.4(When determined in accordance with IS 12235 (Part 2), the vicat softening temperature of the specimen shall not be less than 79°C.)	-	1000	10% Discount to BIS for others 1.5 times of mentioned testing charges.
Cl.8.5(After the required period of exposure, the tensile strengths of two samples when tested as per IS 12235 (Part 13) shall not show difference of more than 20 percent of their initial tensile strengths)	-	2500	10% Discount to BIS for others 1.5 times of mentioned testing charges.
Cl. 9, IS 12235 Part 7(Resistance to Sulphuric Acid)	-	500	10% Discount to BIS for others 1.5 times of mentioned testing charges.
Cl.10.1(When tested by method prescribed in IS 12235 (Part 9),the pipe shall have a true impact rate of not more than 10 percent. Mass of striker and height of fall shall be as per Annex A.)	-	500	10% Discount to BIS for others 1.5 times of mentioned testing charges.
Cl.10.2(When determined in accordance with the method described in IS 12235 (Part 13), the tensile strength at break shall not be less than 45 MPa.)	-	1000	10% Discount to BIS for others 1.5 times of mentioned testing charges.
Cl.10.3(The axial shrinkage shall not exceed 2 percent when determined in accordance with Annex B.)	-	1000	10% Discount to BIS for others 1.5 times of mentioned testing charges.
Cl.11.(Jointing of solvent cementing joints is to be carried out using solvent conforming to IS 14182. Apply a pressure of 0.05 MPa for a period of 15 min and there should be no leakage at any joint.)	-	2500	10% Discount to BIS for others 1.5 times of mentioned testing charges.
Cl. 12, IS 12235 Part 11(Resistance to Di-Chloro-Methane)	-	500	10% Discount to BIS for others 1.5 times of mentioned testing charges.
8.6(Effect on Water Test)	-	2500	10% Discount to BIS for others 1.5 times of mentioned testing charges.
14(Marking)	-	500	10% Discount to BIS for others 1.5 times of mentioned testing charges.

21 Aug, 2027

-
Upto 315 mm only

104

IS 4984 (2016)

Polyethylene pipes for water supply - Specification (Fifth Revision)

20500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.10(Slow Crack Growth Rate)	-	2000	10% Discount to BIS for others 1.5 times of mentioned testing charges.
8.9 table-6(Elongation at Break)	-	2000	10% Discount to BIS for others 1.5 times of mentioned testing charges.
8.8(Tensile Strength for Butt-fusion)	-	2000	10% Discount to BIS for others 1.5 times of mentioned testing charges.
8.7(Density)	-	500	10% Discount to BIS for others 1.5 times of mentioned testing charges.
8.5 (Oxidation Induction Time)	-	1000	10% Discount to BIS for others 1.5 times of mentioned testing charges.
8.4( Melt Flow Rate)	-	1000	10% Discount to BIS for others 1.5 times of mentioned testing charges.
8.2(Longitudinal Reversion Test)	-	1000	10% Discount to BIS for others 1.5 times of mentioned testing charges.
8.1.2 table -5(Internal Pressure Creep Rupture Test of Pipe Joints)	-	2500	10% Discount to BIS for others 1.5 times of mentioned testing charges.
8,/8.1/8.1.1 table-5(PERFORMANCE REQUIREMENTS / Hydraulic Characteristics/ Internal Pressure Creep Rupture Test of Pipe)	-	2500	10% Discount to BIS for others 1.5 times of mentioned testing charges.
7.4.1.2(Ovality)	-	500	10% Discount to BIS for others 1.5 times of mentioned testing charges.
7.4 table -3 & 4(6.1 Dimensions)	-	500	10% Discount to BIS for others 1.5 times of mentioned testing charges.
7.2(Length)	-	500	10% Discount to BIS for others 1.5 times of mentioned testing charges.
6.2.1(6.1.1 Identification Stripes)	-	500	10% Discount to BIS for others 1.5 times of mentioned testing charges.
6.2(Colour)	-	500	10% Discount to BIS for others 1.5 times of mentioned testing charges.
6.1.4(PIPE DESCRIPTION)	-	500	10% Discount to BIS for others 1.5 times of mentioned testing charges.
6.1.3 (PIPE DESCRIPTION)	-	500	10% Discount to BIS for others 1.5 times of mentioned testing charges.
6, 6.1.2(PIPE DESCRIPTION)	-	500	10% Discount to BIS for others 1.5 times of mentioned testing charges.
6, 6.1.1(PIPE DESCRIPTION)	-	500	10% Discount to BIS for others 1.5 times of mentioned testing charges.
6, 6.1(PIPE DESCRIPTION)	-	500	10% Discount to BIS for others 1.5 times of mentioned testing charges.
8.6(Overall migration)	-	500	10% Discount to BIS for others 1.5 times of mentioned testing charges.
8.3(Carbon black)	-	500	10% Discount to BIS for others 1.5 times of mentioned testing charges.
5.4(Anti oxydent)	-	500	10% Discount to BIS for others 1.5 times of mentioned testing charges.
5.3(e)(Carbon Black Master Batch)	-	500	10% Discount to BIS for others 1.5 times of mentioned testing charges.
5.3(d)(Carbon Black Master Batch)	-	500	10% Discount to BIS for others 1.5 times of mentioned testing charges.
5.3(c)(Carbon Black Master Batch)	-	500	10% Discount to BIS for others 1.5 times of mentioned testing charges.
5.3(b)(Carbon Black Master Batch)	-	500	10% Discount to BIS for others 1.5 times of mentioned testing charges.
5.3 (a)(Carbon Black Master Batch)	-	500	10% Discount to BIS for others 1.5 times of mentioned testing charges.
5.2(Polyethylene Resin)	-	500	10% Discount to BIS for others 1.5 times of mentioned testing charges.
5, 5.1 table-1(MATERIALS)	-	500	10% Discount to BIS for others 1.5 times of mentioned testing charges.
7()	-	500	10% Discount to BIS for others 1.5 times of mentioned testing charges.
5.2(Density)	-	500	10% Discount to BIS for others 1.5 times of mentioned testing charges.
5.2(MFI @ 1900C/5.0 Kg)	-	500	10% Discount to BIS for others 1.5 times of mentioned testing charges.
5.2(Volatile matter Content)	-	500	10% Discount to BIS for others 1.5 times of mentioned testing charges.
5.3(Toluene Extract)	-	500	10% Discount to BIS for others 1.5 times of mentioned testing charges.
Clause 7.1(Visual Apperance)	-	500	10% Discount to BIS for others 1.5 times of mentioned testing charges.
Clause 7.3(Coiling)	-	500	10% Discount to BIS for others 1.5 times of mentioned testing charges.
Clause 8.3(Carbon Black content)	-	500	10% Discount to BIS for others 1.5 times of mentioned testing charges.
Clause 8.3(Carbon Black Dispersion)	-	500	10% Discount to BIS for others 1.5 times of mentioned testing charges.
Clause 8.6(Overall migration (stimulate))	-	500	10% Discount to BIS for others 1.5 times of mentioned testing charges.
Clause 8.6(Overall migration (surface of material))	-	500	10% Discount to BIS for others 1.5 times of mentioned testing charges.
7.1(Visual Appearance)	-	500	10% Discount to BIS for others 1.5 times of mentioned testing charges.
7.3(Coiling)	-	500	10% Discount to BIS for others 1.5 times of mentioned testing charges.
Table-2 (iii, iv)(Thermal Stability (Oxidation Induction Time), Volatile Matter)	-	500	10% Discount to BIS for others 1.5 times of mentioned testing charges.
Cl. 8.3(Carbon Black Content)	-	500	10% Discount to BIS for others 1.5 times of mentioned testing charges.
Cl. 8.3(Carbon Black Dispersion)	-	500	10% Discount to BIS for others 1.5 times of mentioned testing charges.
5.2,T2(Melt Flow rate(Temperature - 190oC,Mass 5kg)-IS 2530-1963)	-	500	10% Discount to BIS for others 1.5 times of mentioned testing charges.
8.7(Density-IS 7328:2020)	-	500	10% Discount to BIS for others 1.5 times of mentioned testing charges.
8.7(Corrected Density- IS 7328:2020)	-	500	10% Discount to BIS for others 1.5 times of mentioned testing charges.
8.9,T6("Tensile - IS 4984-2016 (Annexure-H)")	-	500	10% Discount to BIS for others 1.5 times of mentioned testing charges.
8.9,T6("Elongation -IS 4984-2016 (Annexure-H)")	-	500	10% Discount to BIS for others 1.5 times of mentioned testing charges.
Cl 8.3(Carbon Black Content)	-	500	10% Discount to BIS for others 1.5 times of mentioned testing charges.
Cl 8.3(Carbon Black Dispersion)	-	500	10% Discount to BIS for others 1.5 times of mentioned testing charges.

21 Aug, 2027

-
Upto 630 mm only

105

IS 269 (2015)

Ordinary portland cement - Specification (Sixth Revision)

Grade OPC 33, OPC 43, OPC 43S, OPC 53, OPC 53S

8500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7 Table-3 v(Transverse Strength - IS 4031 Part 8 (Optional))	-	750	10 % Discount to BIS and 1.5 times of testing charges to other clients.
7 Table-3 iv c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	750	10 % Discount to BIS and 1.5 times of testing charges to other clients.
7 Table-3 iv c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	750	10 % Discount to BIS and 1.5 times of testing charges to other clients.
7 Table-3 iv c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	750	10 % Discount to BIS and 1.5 times of testing charges to other clients.
7 Table-3 iv b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	750	10 % Discount to BIS and 1.5 times of testing charges to other clients.
7 Table-3 iv b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	750	10 % Discount to BIS and 1.5 times of testing charges to other clients.
7 Table-3 iv b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	750	10 % Discount to BIS and 1.5 times of testing charges to other clients.
7 Table-3 iv a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	750	10 % Discount to BIS and 1.5 times of testing charges to other clients.
7 Table-3 iv a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	750	10 % Discount to BIS and 1.5 times of testing charges to other clients.
7 Table-3 iv a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	750	10 % Discount to BIS and 1.5 times of testing charges to other clients.
7 Table-3 iii b(Setting Time Final)	-	750	10 % Discount to BIS and 1.5 times of testing charges to other clients.
7 Table-3 iii a(Setting Time Initial)	-	750	10 % Discount to BIS and 1.5 times of testing charges to other clients.
7 Table-3 ii b(Expansion after aeration)	-	750	10 % Discount to BIS and 1.5 times of testing charges to other clients.
7 Table-3 ii b(Expansion by Autoclave)	-	750	10 % Discount to BIS and 1.5 times of testing charges to other clients.
7 Table-3 ii a(Expansion after aeration)	-	750	10 % Discount to BIS and 1.5 times of testing charges to other clients.
7 Table-3 ii a(Expansion by Le Chatelier)	-	750	10 % Discount to BIS and 1.5 times of testing charges to other clients.
7 Table-3 i.(Fineness)	-	750	10 % Discount to BIS and 1.5 times of testing charges to other clients.
6.1 Table-2 viii(Alkali content)	-	500	10 % Discount to BIS and 1.5 times of testing charges to other clients.
6.1 Table-2 vii(Chloride content)	-	500	10 % Discount to BIS and 1.5 times of testing charges to other clients.
6.1 Table-2 vi(Loss on ignition)	-	500	10 % Discount to BIS and 1.5 times of testing charges to other clients.
6.1 Table-2 v(Total Sulphur Content calculated as Sulphuric Anhydride)	-	500	10 % Discount to BIS and 1.5 times of testing charges to other clients.
6.1 Table-2 iv(Magnesia)	-	500	10 % Discount to BIS and 1.5 times of testing charges to other clients.
6.1 Table-2 iii.(Insoluble residue)	-	500	10 % Discount to BIS and 1.5 times of testing charges to other clients.
6.1 Table-2 ii.(Ratio of percentage of alumina to that of iron oxide)	-	500	10 % Discount to BIS and 1.5 times of testing charges to other clients.
6.1 Table-2 i.(Ratio of percentage of lime to percentage of silica, alumina and iron oxide)	-	500	10 % Discount to BIS and 1.5 times of testing charges to other clients.
6 - Table - 1 viii(Alkali content as (Na2O + 0.658 K2O) - Cl 4.11 of IS 4032:1985)	-	500	10 % Discount to BIS and 1.5 times of testing charges to other clients.
6 - Table - 1 vii(Chloride content - Cl 4.13 of IS 4032:1985)	-	500	10 % Discount to BIS and 1.5 times of testing charges to other clients.
6 - Table - 1 vi(Loss on ignition - Cl 4.2 of IS 4032:1985)	-	500	10 % Discount to BIS and 1.5 times of testing charges to other clients.
6 - Table - 1 v(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 4.9 of IS 4032:1985)	-	500	10 % Discount to BIS and 1.5 times of testing charges to other clients.
6 - Table - 1 iv(Magnesia - Cl 4.8 of IS 4032:1985)	-	500	10 % Discount to BIS and 1.5 times of testing charges to other clients.
6 - Table - 1 iii(Insoluble residue - Cl 4.10 of IS 4032:1985)	-	500	10 % Discount to BIS and 1.5 times of testing charges to other clients.
6 - Table - 1 ii(Ratio of percentage of alumina to that of iron oxide - Cl 4 of IS 4032:1985)	-	500	10 % Discount to BIS and 1.5 times of testing charges to other clients.
6 - Table - 1 i(Ratio of percentage of lime to percentages of silica, alumina and iron oxide - Cl 4 of IS 4032:1985)	-	500	10 % Discount to BIS and 1.5 times of testing charges to other clients.
7.1.8(Pump efficiency shall be as per 11.4)	-	500	10 % Discount to BIS and 1.5 times of testing charges to other clients.
11(Marking)	-	500	10 % Discount to BIS and 1.5 times of testing charges to other clients.
5(Manufacture)	-	500	10 % Discount to BIS and 1.5 times of testing charges to other clients.
9(Manufacture certificate)	-	500	10 % Discount to BIS and 1.5 times of testing charges to other clients.
10(Packing)	-	500	10 % Discount to BIS and 1.5 times of testing charges to other clients.
5.1.1 Table 1 Sl. No. iv(Calcium Carbonate)	-	500	10 % Discount to BIS and 1.5 times of testing charges to other clients.
14(Requirment for an Reciving system )	-	500	10 % Discount to BIS and 1.5 times of testing charges to other clients.
15.2.1(Records characteristics)	-	500	10 % Discount to BIS and 1.5 times of testing charges to other clients.
15.2.2(Measured data unit)	-	500	10 % Discount to BIS and 1.5 times of testing charges to other clients.
15.2.3(Fixed length record )	-	500	10 % Discount to BIS and 1.5 times of testing charges to other clients.
15.2.4(Variable length record)	-	500	10 % Discount to BIS and 1.5 times of testing charges to other clients.
15.2.5(segmented records)	-	500	10 % Discount to BIS and 1.5 times of testing charges to other clients.
15.3(Attributes of record structured files)	-	500	10 % Discount to BIS and 1.5 times of testing charges to other clients.
15.4(Requirments for systems implementing section 4)	-	500	10 % Discount to BIS and 1.5 times of testing charges to other clients.
13(Requirment for an originating system )	-	500	10 % Discount to BIS and 1.5 times of testing charges to other clients.
7 Table-3 v(Transverse Strength - IS 4031 Part 8 (Optional))	-	750	10 % Discount to BIS and 1.5 times of testing charges to other clients.
7 Table-3 iv c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	750	10 % Discount to BIS and 1.5 times of testing charges to other clients.
7 Table-3 iv c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	750	10 % Discount to BIS and 1.5 times of testing charges to other clients.
7 Table-3 iv c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	750	10 % Discount to BIS and 1.5 times of testing charges to other clients.
7 Table-3 iv b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	750	10 % Discount to BIS and 1.5 times of testing charges to other clients.
7 Table-3 iv b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	750	10 % Discount to BIS and 1.5 times of testing charges to other clients.
7 Table-3 iv b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	750	10 % Discount to BIS and 1.5 times of testing charges to other clients.
7 Table-3 iv a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	750	10 % Discount to BIS and 1.5 times of testing charges to other clients.
7 Table-3 iv a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	750	10 % Discount to BIS and 1.5 times of testing charges to other clients.
7 Table-3 iv a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	750	10 % Discount to BIS and 1.5 times of testing charges to other clients.
7 Table-3 iii b(Setting Time Final)	-	750	10 % Discount to BIS and 1.5 times of testing charges to other clients.
7 Table-3 iii a(Setting Time Initial)	-	750	10 % Discount to BIS and 1.5 times of testing charges to other clients.
7 Table-3 ii b(Expansion after aeration)	-	750	10 % Discount to BIS and 1.5 times of testing charges to other clients.
7 Table-3 ii b(Expansion by Autoclave)	-	750	10 % Discount to BIS and 1.5 times of testing charges to other clients.
7 Table-3 ii a(Expansion after aeration)	-	750	10 % Discount to BIS and 1.5 times of testing charges to other clients.
7 Table-3 ii a(Expansion by Le Chatelier)	-	750	10 % Discount to BIS and 1.5 times of testing charges to other clients.
7 Table-3 i.(Fineness)	-	750	10 % Discount to BIS and 1.5 times of testing charges to other clients.
6.1 Table-2 viii(Alkali content)	-	500	10 % Discount to BIS and 1.5 times of testing charges to other clients.
6.1 Table-2 vii(Chloride content)	-	500	10 % Discount to BIS and 1.5 times of testing charges to other clients.
6.1 Table-2 vi(Loss on ignition)	-	500	10 % Discount to BIS and 1.5 times of testing charges to other clients.
6.1 Table-2 v(Total Sulphur Content calculated as Sulphuric Anhydride)	-	500	10 % Discount to BIS and 1.5 times of testing charges to other clients.
6.1 Table-2 iv(Magnesia)	-	500	10 % Discount to BIS and 1.5 times of testing charges to other clients.
6.1 Table-2 iii.(Insoluble residue)	-	500	10 % Discount to BIS and 1.5 times of testing charges to other clients.
6.1 Table-2 ii.(Ratio of percentage of alumina to that of iron oxide)	-	500	10 % Discount to BIS and 1.5 times of testing charges to other clients.
6.1 Table-2 i.(Ratio of percentage of lime to percentage of silica, alumina and iron oxide)	-	500	10 % Discount to BIS and 1.5 times of testing charges to other clients.
6 - Table - 1 viii( Alkali content as (Na2O + 0.658 K2O) - Cl 4.11 of IS 4032:1985)	-	500	10 % Discount to BIS and 1.5 times of testing charges to other clients.
6 - Table - 1 vii(Chloride content - Cl 4.13 of IS 4032:1985)	-	500	10 % Discount to BIS and 1.5 times of testing charges to other clients.
6 - Table - 1 vi(Loss on ignition - Cl 4.2 of IS 4032:1985)	-	500	10 % Discount to BIS and 1.5 times of testing charges to other clients.
6 - Table - 1 v(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 4.9 of IS 4032:1985)	-	500	10 % Discount to BIS and 1.5 times of testing charges to other clients.
6 - Table - 1 iv(Magnesia - Cl 4.8 of IS 4032:1985)	-	500	10 % Discount to BIS and 1.5 times of testing charges to other clients.
6 - Table - 1 iii(Insoluble residue - Cl 4.10 of IS 4032:1985)	-	500	10 % Discount to BIS and 1.5 times of testing charges to other clients.
6 - Table - 1 ii(Ratio of percentage of alumina to that of iron oxide - Cl 4 of IS 4032:1985)	-	500	10 % Discount to BIS and 1.5 times of testing charges to other clients.
6 - Table - 1 i(Ratio of percentage of lime to percentages of silica, alumina and iron oxide - Cl 4 of IS 4032:1985)	-	500	10 % Discount to BIS and 1.5 times of testing charges to other clients.
Clause 7 Table 3, SI No. (v) (Compressive strength of Transverse Specimen, 672 ± 4 h)	-	750	10 % Discount to BIS and 1.5 times of testing charges to other clients.
Clause 7 Table 3, SI No. (v) (Compressive strength of Transverse Specimen, 168 ± 2 h)	-	750	10 % Discount to BIS and 1.5 times of testing charges to other clients.
Clause 7 Table 3, SI No. (v) (Compressive strength of Transverse Specimen, 72 ± 1 h)	-	750	10 % Discount to BIS and 1.5 times of testing charges to other clients.
Clause 7 Table 3, SI No. (v) (Transverse Strength, 672 ± 4 h)	-	750	10 % Discount to BIS and 1.5 times of testing charges to other clients.
Clause 7 Table 3, SI No. (v) (Transverse Strength, 168 ± 2 h)	-	750	10 % Discount to BIS and 1.5 times of testing charges to other clients.
Clause 7 Table 3, SI No. (v) (Transverse Strength, 72 ± 1 h)	-	750	10 % Discount to BIS and 1.5 times of testing charges to other clients.
7 Table-3 v(Transverse Strength - IS 4031 Part 8 (Optional))	-	750	10 % Discount to BIS and 1.5 times of testing charges to other clients.
7 Table-3 iv c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	750	10 % Discount to BIS and 1.5 times of testing charges to other clients.
7 Table-3 iv c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	750	10 % Discount to BIS and 1.5 times of testing charges to other clients.
7 Table-3 iv c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	750	10 % Discount to BIS and 1.5 times of testing charges to other clients.
7 Table-3 iv b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	750	10 % Discount to BIS and 1.5 times of testing charges to other clients.
7 Table-3 iv b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	750	10 % Discount to BIS and 1.5 times of testing charges to other clients.
7 Table-3 iv b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	750	10 % Discount to BIS and 1.5 times of testing charges to other clients.
7 Table-3 iv a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	750	10 % Discount to BIS and 1.5 times of testing charges to other clients.
7 Table-3 iv a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	750	10 % Discount to BIS and 1.5 times of testing charges to other clients.
7 Table-3 iv a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	750	10 % Discount to BIS and 1.5 times of testing charges to other clients.
7 Table-3 iii b(Setting Time Final)	-	750	10 % Discount to BIS and 1.5 times of testing charges to other clients.
7 Table-3 iii a(Setting Time Initial)	-	750	10 % Discount to BIS and 1.5 times of testing charges to other clients.
7 Table-3 ii b(Expansion after aeration)	-	750	10 % Discount to BIS and 1.5 times of testing charges to other clients.
7 Table-3 ii b(Expansion by Autoclave)	-	750	10 % Discount to BIS and 1.5 times of testing charges to other clients.
7 Table-3 ii a(Expansion after aeration)	-	750	10 % Discount to BIS and 1.5 times of testing charges to other clients.
7 Table-3 ii a(Expansion by Le Chatelier)	-	750	10 % Discount to BIS and 1.5 times of testing charges to other clients.
7 Table-3 i.(Fineness)	-	750	10 % Discount to BIS and 1.5 times of testing charges to other clients.
6.1 Table-2 viii(Alkali content)	-	500	10 % Discount to BIS and 1.5 times of testing charges to other clients.
6.1 Table-2 vii(Chloride content)	-	500	10 % Discount to BIS and 1.5 times of testing charges to other clients.
6.1 Table-2 vi(Loss on ignition)	-	500	10 % Discount to BIS and 1.5 times of testing charges to other clients.
6.1 Table-2 v(Total Sulphur Content calculated as Sulphuric Anhydride)	-	500	10 % Discount to BIS and 1.5 times of testing charges to other clients.
6.1 Table-2 iv(Magnesia)	-	500	10 % Discount to BIS and 1.5 times of testing charges to other clients.
6.1 Table-2 iii.(Insoluble residue)	-	500	10 % Discount to BIS and 1.5 times of testing charges to other clients.
6.1 Table-2 ii.(Ratio of percentage of alumina to that of iron oxide)	-	500	10 % Discount to BIS and 1.5 times of testing charges to other clients.
6.1 Table-2 i.(Ratio of percentage of lime to percentage of silica, alumina and iron oxide)	-	500	10 % Discount to BIS and 1.5 times of testing charges to other clients.
6.1 Table-2 i.(Ratio of percentage of lime to percentage of silica, alumina and iron oxide)	-	500	10 % Discount to BIS and 1.5 times of testing charges to other clients.
6.1 Table-2 ii.(Ratio of percentage of alumina to that of iron oxide)	-	500	10 % Discount to BIS and 1.5 times of testing charges to other clients.
6.1 Table-2 iii.(Insoluble residue)	-	500	10 % Discount to BIS and 1.5 times of testing charges to other clients.
6.1 Table-2 iv(Magnesia)	-	500	10 % Discount to BIS and 1.5 times of testing charges to other clients.
6.1 Table-2 v(Total Sulphur Content calculated as Sulphuric Anhydride)	-	500	10 % Discount to BIS and 1.5 times of testing charges to other clients.
6.1 Table-2 vi(Loss on ignition)	-	500	10 % Discount to BIS and 1.5 times of testing charges to other clients.
6.1 Table-2 vii(Chloride content)	-	500	10 % Discount to BIS and 1.5 times of testing charges to other clients.
7 Table-3 i.(Fineness)	-	750	10 % Discount to BIS and 1.5 times of testing charges to other clients.
7 Table-3 ii a(Expansion by Le Chatelier)	-	750	10 % Discount to BIS and 1.5 times of testing charges to other clients.
7 Table-3 ii a(Expansion after aeration)	-	750	10 % Discount to BIS and 1.5 times of testing charges to other clients.
7 Table-3 ii b(Expansion by Autoclave)	-	750	10 % Discount to BIS and 1.5 times of testing charges to other clients.
7 Table-3 ii b(Expansion after aeration)	-	750	10 % Discount to BIS and 1.5 times of testing charges to other clients.
7 Table-3 iii a(Setting Time Initial)	-	750	10 % Discount to BIS and 1.5 times of testing charges to other clients.
7 Table-3 iii b(Setting Time Final)	-	750	10 % Discount to BIS and 1.5 times of testing charges to other clients.
7 Table-3 iv a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	750	10 % Discount to BIS and 1.5 times of testing charges to other clients.
7 Table-3 iv a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	750	10 % Discount to BIS and 1.5 times of testing charges to other clients.
7 Table-3 iv a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	750	10 % Discount to BIS and 1.5 times of testing charges to other clients.
7 Table-3 iv b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	750	10 % Discount to BIS and 1.5 times of testing charges to other clients.
7 Table-3 iv b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	750	10 % Discount to BIS and 1.5 times of testing charges to other clients.
7 Table-3 iv b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	750	10 % Discount to BIS and 1.5 times of testing charges to other clients.
7 Table-3 iv c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	750	10 % Discount to BIS and 1.5 times of testing charges to other clients.
7 Table-3 iv c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	750	10 % Discount to BIS and 1.5 times of testing charges to other clients.
7 Table-3 iv c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	750	10 % Discount to BIS and 1.5 times of testing charges to other clients.
7 Table-3 v(Transverse Strength - IS 4031 Part 8 (Optional))	-	750	10 % Discount to BIS and 1.5 times of testing charges to other clients.

21 Aug, 2027

-
-

106

IS 4985 (2021)

UNPLASTICIZED PVC PIPES FOR POTABLE WATER SUPPLIES SPECIFICATION Fourth Revision

22500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
10.1(Colour)	-	100	10% Discount to BIS for others 1.5 times of mentioned testing charges
10.1(Surface Finish)	-	100	10% Discount to BIS for others 1.5 times of mentioned testing charges
7.2.1.1 Table3(Angle of taper (Note-1))	-	100	10% Discount to BIS for others 1.5 times of mentioned testing charges
10.7(Sulphated Ash Content)	-	500	10% Discount to BIS for others 1.5 times of mentioned testing charges
5(CLASSIFICATION OF PIPES)	-	100	10% Discount to BIS for others 1.5 times of mentioned testing charges
7(DIMENSIONS-PIPE-Nominal Diameter)	-	200	10% Discount to BIS for others 1.5 times of mentioned testing charges
7.1.1.1(DIMENSIONS-PIPE-Mean O.D. (Minimum))	-	200	10% Discount to BIS for others 1.5 times of mentioned testing charges
7.1.1.1(DIMENSIONS-PIPE-Mean O.D. (Mamimum))	-	200	10% Discount to BIS for others 1.5 times of mentioned testing charges
7.1.1.1(DIMENSIONS-PIPE-Mean O.D. Variation)	-	200	10% Discount to BIS for others 1.5 times of mentioned testing charges
7.1.1.2(DIMENSIONS-PIPE-O.D. at any Point (Minimum))	-	200	10% Discount to BIS for others 1.5 times of mentioned testing charges
7.1.1.2(DIMENSIONS-PIPE-O.D. at any Point (Maximum))	-	200	10% Discount to BIS for others 1.5 times of mentioned testing charges
7.1.1.2(DIMENSIONS-PIPE-Ovality (Maximum))	-	200	10% Discount to BIS for others 1.5 times of mentioned testing charges
7.1.2.1(DIMENSIONS-PIPE-Thickness(Minimum))	-	200	10% Discount to BIS for others 1.5 times of mentioned testing charges
7.1.2.1(DIMENSIONS-PIPE-Thickness(Maximum))	-	200	10% Discount to BIS for others 1.5 times of mentioned testing charges
7.1.2.1(DIMENSIONS-PIPE-Average Thickness)	-	200	10% Discount to BIS for others 1.5 times of mentioned testing charges
7.2.1(DIMENSIONS-Socket)	-	200	10% Discount to BIS for others 1.5 times of mentioned testing charges
7.2.1(DIMENSIONS-Socket)	-	200	10% Discount to BIS for others 1.5 times of mentioned testing charges
7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Minimum Length)	-	200	10% Discount to BIS for others 1.5 times of mentioned testing charges
7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Diameter at mid point of the socket length (Minimum))	-	200	10% Discount to BIS for others 1.5 times of mentioned testing charges
7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Diameter at mid point of the socket length (Maximum))	-	200	10% Discount to BIS for others 1.5 times of mentioned testing charges
7.2.1.2(a)-Table 5(DIMENSIONS-Sockets for elastomeric sealing ring joints-Minimum depth of engagement)	-	200	10% Discount to BIS for others 1.5 times of mentioned testing charges
7.2.1.2-Table 4(DIMENSIONS-Sockets for elastomeric sealing ring joints-Socket inner Diameter)	-	500	10% Discount to BIS for others 1.5 times of mentioned testing charges
8(SEALING RINGS)	-	500	10% Discount to BIS for others 1.5 times of mentioned testing charges
9.1(PIPE ENDS)	-	100	10% Discount to BIS for others 1.5 times of mentioned testing charges
10.1(PHYSICAL AND CHEMICAL CHARACTERISTICS-Visual Appearance)	-	100	10% Discount to BIS for others 1.5 times of mentioned testing charges
10.1.1(PHYSICAL AND CHEMICAL CHARACTERISTICS-Visual Appearance)	-	100	10% Discount to BIS for others 1.5 times of mentioned testing charges
10.2(PHYSICAL AND CHEMICAL CHARACTERISTICS-Opacity)	-	100	10% Discount to BIS for others 1.5 times of mentioned testing charges
10.4(PHYSICAL AND CHEMICAL CHARACTERISTICS- Reversion Test)	-	2000	10% Discount to BIS for others 1.5 times of mentioned testing charges
10.5(PHYSICAL AND CHEMICAL CHARACTERISTICS- Vicat Softening Temperature)	-	1000	10% Discount to BIS for others 1.5 times of mentioned testing charges
10.6(PHYSICAL AND CHEMICAL CHARACTERISTICS- Density)	-	1000	10% Discount to BIS for others 1.5 times of mentioned testing charges
11.1-Table 6(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Type Test))	-	2500	10% Discount to BIS for others 1.5 times of mentioned testing charges
11.1-Table 6(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test))	-	2500	10% Discount to BIS for others 1.5 times of mentioned testing charges
11.1-Table 7(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Type Test)-for Integral Sealing Ring Sockets)	-	2500	10% Discount to BIS for others 1.5 times of mentioned testing charges
11.1-Table 7(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test)-for Integral Sealing Ring Sockets)	-	2500	10% Discount to BIS for others 1.5 times of mentioned testing charges
11.1.1(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test)-for Plumbing pipes)	-	2500	10% Discount to BIS for others 1.5 times of mentioned testing charges
11.2(Resistance to External Blows at 0°C)	-	2500	10% Discount to BIS for others 1.5 times of mentioned testing charges
10.3(Effect on Water Test)	-	2500	10% Discount to BIS for others 1.5 times of mentioned testing charges
6.1.2(PVC Resin)	-	2500	10% Discount to BIS for others 1.5 times of mentioned testing charges
7.1.3(mean outside diameter, outside diameter at any point, and wall thickness of plumbing pipes)	-	2500	10% Discount to BIS for others 1.5 times of mentioned testing charges
7.1.4(Length)	-	2500	10% Discount to BIS for others 1.5 times of mentioned testing charges
6.1.1(VCM Content)	-	2500	10% Discount to BIS for others 1.5 times of mentioned testing charges
7.2.1.2b(Maximum inner diameter of groove)	-	200	10% Discount to BIS for others 1.5 times of mentioned testing charges
13.1(Marking)	-	200	10% Discount to BIS for others 1.5 times of mentioned testing charges

21 Aug, 2027

-
Upto 500 mm only

107

IS 2185 : Part 1 (2005)

Concrete masonry units - Specification: Part 1 hollow and solid concrete blocks (Third Revision)

17500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
9.1(PHYSICAL REQUIREMENTS-General)	-	1000	10 % Discount to BIS for others 1.5 times of mentioned testing charges.
9.2 & 4.2(PHYSICAL REQUIREMENTS-Nominal Dimensions 1.Length 2.Hight 3. Width)	-	1000	10 % Discount to BIS for others 1.5 times of mentioned testing charges.
9.2 & 4.2.3(Nominal Dimensions-variation in the length of units )	-	1000	10 % Discount to BIS for others 1.5 times of mentioned testing charges.
9.2 & 4.2.3(Nominal Dimensions -variation in height and width of units )	-	1000	10 % Discount to BIS for others 1.5 times of mentioned testing charges.
9.2 & 4.2.4, Table-1(Nominal Dimensions-thickness of the face shell)	-	1000	10 % Discount to BIS for others 1.5 times of mentioned testing charges.
9.2 & 4.2.4, Table-1(Nominal Dimensions-thickness of the Web shell)	-	1000	10 % Discount to BIS for others 1.5 times of mentioned testing charges.
9.3 & 5.1 & 5.2 Table 2(PHYSICAL REQUIREMENTS-Blocks Density - 1.Hollow (Open and Closed Cavity) Concrete Block- Grade Aor Grade B 2.Solid Concrete Block — Grade C)	-	2000	10 % Discount to BIS for others 1.5 times of mentioned testing charges.
9.4- Table 2(PHYSICAL REQUIREMENTS - Compressive Strength 1.Minimum Average Compressive Strength of Units 2.Minimum Average Compressive Strength of Individual Unit)	-	5000	10 % Discount to BIS for others 1.5 times of mentioned testing charges.
9.5(PHYSICAL REQUIREMENTS -Water Absorption)	-	2500	10 % Discount to BIS for others 1.5 times of mentioned testing charges.
9.6(PHYSICAL REQUIREMENTS -Drying Shrinkage)	-	2500	10 % Discount to BIS for others 1.5 times of mentioned testing charges.
9.7(PHYSICAL REQUIREMENTS -Moisture Movement)	-	2500	10 % Discount to BIS for others 1.5 times of mentioned testing charges.
15(Marking)	-	500	10 % Discount to BIS for others 1.5 times of mentioned testing charges.

21 Aug, 2027

-
-

Bureau of Indian Standards

The National Standards Body of India

Delta Testing and Research Laboratories Private Limited

Plot No. C-5, Block - C, Main Kanjhawala Road, Rajiv Nagar, Delhi, North West, Delhi, 110086

9811037450 info@deltatestinglab.com

Scope List