BIS - LIMS (Laboratory Information Management System)

Delta Testing and Research Laboratories Private Limited

Plot No. C-5, Block - C, Main Kanjhawala Road, Rajiv Nagar, Delhi, North West, Delhi, 110086

9811037450 info@deltatestinglab.com

Scope List

Reset

104 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Exclusion

Testing Charges (Excl. Of Taxes)

Facility Type

Effective Date

Validity Date

Remark

IS 1161 (2014)

Steel tubes for structural purposes - Specification (Fifth Revision)

All Grade / Type / Size / Designation

8000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 6(Outer Diameter, Thickness & Mass)	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 7(Workmanship)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 8(Workmanship)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 9(Workmanship)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 11(Tensile Test, Flattening Test & Cold Bend Test)	-	3500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 13(Workmanship)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 6(Outer Diameter, Thickness & Mass)	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 7(Workmanship)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 8(Workmanship)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 9(Workmanship)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 11(Tensile Test, Flattening Test & Cold Bend Test)	-	3500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 13(Workmanship)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 6(Outer Diameter, Thickness & Mass)	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 7(Workmanship)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 8(Workmanship)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 9(Workmanship)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 11(Tensile Test, Flattening Test & Cold Bend Test)	-	3500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 13(Workmanship)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
8 AND AS PER IS 4736(UNIFORMITY OF ZINC COATING)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
8 AND AS PER IS 4736(MASS OF ZINC COATING)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
5 AND AS PER IS 10748(COPPER)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
5 AND AS PER IS 10748(MICRO ALLOY)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
5 AND AS PER IS 10748(CARBON EQUIVALENT)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
5 AND AS PER IS 10748(CARBON)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause - 5.1, Table-3( ALUMINIUM)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause - 5.1, Table-3(SILICON)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause - 5.1, Table-3(NITROGEN)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause - 5.1, Table-3(MANGANESE)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause - 5.1, Table-3(PHOSPHURS)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause - 5.1, Table-3(SULPHUR)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause - 5.1, Table-3( CARBON)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
9(Straightness)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
10(Lengths)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 11.3.1(Flattening test (over 50 mm NB))	-	1500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 11.3.1(Cold bend test (upto & including 50 mm NB))	-	1500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 11.2 Table 2(Elongation)	-	1500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 11.2 Table 2(Yield strength)	-	1500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 6 , 6.2 Table 1(Square of radius of gyyration)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 6 , 6.2 Table 1(Radius of gyration)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 6 , 6.2 Table 1(Modulus of section)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 6 , 6.2 Table 1(Moment of inertia)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 6 , 6.2 Table 1(Surface internal)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 6 , 6.2 Table 1(Surface external)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 6 , 6.2 Table 1(Internal volume)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 6 , 6.2 Table 1(Area of cross section)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 6 , 6.2 Table 1(Weight)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 6 , 6.2 Table 1(Thickness)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 11.2, Table -2(Elongation)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 11.2, Table -2(Yield Strength)	-	1500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 13(Workmanship)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 11(Tensile Test, Flattening Test & Cold Bend Test)	-	3500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 9(Workmanship)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 8(Workmanship)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 7(Workmanship)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 6(Outer Diameter, Thickness & Mass)	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 6(Outer Diameter, Thickness & Mass)	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 7(Workmanship)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 8(Workmanship)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 9(Workmanship)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 11(Tensile Test, Flattening Test & Cold Bend Test)	-	3500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 13(Workmanship)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
3.1 & 6.1, 6.1.1 & 6.1.3 , Table 1(Outer Diameter - SOP MT-23)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
3.1 & 6.1, 6.1.1 & 6.1.3 , Table 1(Thickness - SOP MT-23)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
3.1 & 6.1, 6.1.1 & 6.1.3 , Table 1(Mass - SOP MT-23)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
3.1 & 6.1, 6.1.1 & 6.1.3 , Table 1(Area of Cross Section - SOP MT-23)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
8.0(Mass of Zinc coating - IS:6745)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
8.0(Freedom from defects - IS 4736)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
8.0(Uniformity of galvanized coating - IS 4736)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
8.0(Adhesion test-Pivoted Hammer Test - IS 4736)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
13.0(Oiling and Painting - Visual)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
12(Marking)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.

Complete

IS 1079 (2017)

Hot rolled carbon steel sheet, plate and strip - Specification (Seventh Revision)

All type of Grade/Type/Size/Designation

7000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 8(UTM)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 9(Press)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 10(Die Press)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 12(Workmanship)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 13(Length, Width & Thickness)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 8(UTM)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 9(Press)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 10(Die Press)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 12(Workmanship)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 13(Length, Width & Thickness)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 8(UTM)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 9(Press)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 10(Die Press)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 12(Workmanship)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 13(Length, Width & Thickness)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.1(Carbon %)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.1(Manganese %)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.1(Phosphorus %)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.1(Sulphur %)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.1(Silicon %)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.1( Copper %)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.1( Aluminium %)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.1( Nb)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.1(V)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.1( Ti)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.1(Cr)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.1(Mo)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.1(Ni)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.1( Nitrogen%)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.1(Microalloying)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.1(Carbon %)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.1(Manganese %)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.1(Phosphorus %)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.1(Sulphur %)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.1(Silicon %)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.1( Copper %)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.1( Aluminium %)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.1( Nb)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.1(V)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.1( Ti)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.1(Cr)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.1(Mo)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.1(Ni)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.1( Nitrogen%)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.1(Microalloying)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.1(Carbon %)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.1(Manganese %)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.1(Phosphorus %)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.1(Sulphur %)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.1(Silicon %)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.1( Copper %)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.1( Aluminium %)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.1( Nb)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.1(V)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.1( Ti)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.1(Cr)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.1(Mo)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.1(Ni)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.1( Nitrogen%)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.1(Microalloying)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl.13(Out of square)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl.13(Flatness)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl.13(Camber)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl.13(Width)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl.13(Thickness)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 8.3, Cl. 8.3.1 Table 5 and Table 6(Percentage Elongation After Fracture at 5.65√A Gauge length)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 8.3, Cl. 8.3.1 Table 5 and Table 6(Percentage Elongation After Fracture at 80 mm Gauge length)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 8.3, Cl. 8.3.1 Table 5 and Table 6(Percentage Elongation After Fracture at 50 mm Gauge length)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 8.3, Cl. 8.3.1 Table 6(0.2% Proof Stress/Yield Stress)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 13(Length, Width & Thickness)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 12(Workmanship)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 10(Die Press)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 9(Press)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 8(UTM)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7(Material Test)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9(Bend test)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
14(Calculation of weight)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 8(UTM)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 9(Press)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 10(Die Press)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 12(Workmanship)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 13(Length, Width & Thickness)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8, Table 5 & 6(Tensile Strength)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8, Table 5 & 6(Yield Strength)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8, Table 5 & 6(Elongation)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 10(Cuppping Test)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 12(Freedom from defect)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 13(Length)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 7, Table 3, Note 1(Any Instrumental Method/Chemical Method)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 7, Table 3, Note 1(By Calculation)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8, Table 5 & 6(Tensile Strength)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8, Table 5 & 6(Yield Strength)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8, Table 5 & 6(Elongation)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 10(Cuppping Test)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 12(Freedom from defect)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 13(Length)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 7, Table 3, Note 1(Boron)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 7, Table 3, Note 1(B+Ti+Nb+V)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
16(Marking and packing)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8, Table 5 & 6(IS 1608 Part 1)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8, Table 5 & 6(IS 1608 Part 1)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8, Table 5 & 6(IS 1608 Part 1)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 10(IS 10175)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 12(IS 1079)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 13(IS/ISO 16160)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 7, Table 3, Note 1(Boron)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 7, Table 3, Note 1(B+Ti+Nb+V)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.

Complete

IS 1030 (1998)

Carbon steel castings for general engineering purposes - Specification (Fifth Revision)

All type of Grade/Type/Size/Designation

8000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
CI.8.1, 8.3 and 8.4.1, Table-1(Carbon)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
CI.8.1, 8.3 and 8.4.1, Table-1(Sulpur)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
CI.8.1, 8.3 and 8.4.1, Table-1(Phosphorus)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
CI.8.1, 8.3 and 8.4.1, Table-1()	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
CI.8.1, 8.3 and 8.4.1, Table-1(Silicon)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
CI.8.1, 8.3 and 8.4.1, Table-1(Chromium)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
CI.8.1, 8.3 and 8.4.1, Table-1(Nickel)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
CI.8.1, 8.3 and 8.4.1, Table-1(Molybdenum)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
CI.8.1, 8.3 and 8.4.1, Table-1(Copper)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
CI.8.1, 8.3 and 8.4.1, Table-1(Vanadium)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
CI.13.2, Table-2(Tensile Test)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
CI.13.2, Table-2(Yield Stress)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
CI.13.2, Table-2(Elongation)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
CI.13.4, Table-2(Bend Test)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
CI.13.3(Impact Test)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
CI.13.3(Hydraulic Test)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9(Workmanship & Finish)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
10(Freedom from defects)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
11(Fetting and dressing)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
14(Non-destructive tests)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
16(Hydraulic test)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
18(Marking)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
1()	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.

Complete

IS 432 : Part 2 (1982)

Mild Steel and Medium Tensile Steel Bars and Hard-Drawn Steel Wire for Concrete Reinforcement: Part 2 Hard-Drawn Steel Wire

All type of Grade/Type/Size/Designation

3000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 4.1(Workmanship)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 5 & 6(Diameter)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 7(UTM)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 8.3(Bending To Both Side At 90°, Then Straight)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 4.1(Workmanship)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 5 & 6(Diameter)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 7(UTM)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 8.3(Bending To Both Side At 90°, Then Straight)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 4.1(Workmanship)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 5 & 6(Diameter)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 7(UTM)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 8.3(Bending To Both Side At 90°, Then Straight)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 3.1.1(Sulphur)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 3.1.1(Phosphorus)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 7.1(Elongation)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 7.1(Proof Stress 0.2 %)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 6.2(Length)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 3(Nitrogen)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 3(Nitrogen)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 7.1(Total Elongation over a gauge length of 8 D Where D is the dia of wire)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 7.1(Proof Stress (0.2 percent ))	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 7.1(Ultimate Tensile Stress)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 8.3(Bending To Both Side At 90°, Then Straight)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 7(UTM)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 5 & 6(Diameter)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 4.1(Workmanship)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 8.3(IS 1716)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 7.1(IS 1608 Part 1)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 8.3(IS 1716)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 7.1(IS 1608 Part 1)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 8.3(Reverse Bend test)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.0 & 7.1(0.2% Proof Strength - IS: 1608 (P1))	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.0 & 7.1(Elongation on SoA 5.65mm GL - IS: 1608 (P1))	-	500	-
10(Marking)	-	500	-
Clause 7.1(Ultimate tensile stress)	-	500	-
Clause 8.3(Reverse Bend test)	-	500	-
Clause 8.3(Reverse Bend test)	-	500	-

Complete

IS 15658 (2021)

Concrete Paving Blocks - Specification ( First Revision )

All Grade / Type / Size / Designation

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Visual Rating of specimen after 50 cycles)	-	5000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Visual Rating of specimen after 25 cycles)	-	5000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Visual Rating of specimen after 10 cycles)	-	5000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Cumulative Weight losses of specimen after 10, 25 & 50 cycles)	-	5000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Weight losses of specimen after 50 cycles)	-	5000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Weight losses of specimen after 25 cycles)	-	5000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Weight losses of specimen after 10 cycles)	-	5000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 7.3, Annex G(Average Breaking Load)	-	2000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 7.3, Annex G(Individual Breaking Load)	-	2000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 7.3, Annex F(Average Failure Load per unit Length)	-	2000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 7.3, Annex F(Individual Failure Load per unit Length)	-	2000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 7.3 & 9.1.4, Table 3, SI No. (v) b)(Average Flexural strength )	-	2000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 7.3 & 9.1.4, Table 3, SI No. (v) a)(Indivdual Flexural strength )	-	2000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 7.3 & 9.1.4, Table 3, SI No. (iv) b)(Average Tensile splitting strength )	-	2000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 7.3 & 9.1.4, Table 3, SI No. (iv) a)(Indivdual Tensile splitting strength )	-	2000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) b) ii)(Wet Abrasion resistance (Average of three test specimens))	-	2000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) b) i)( Indivdual Wet Abrasion Resistance )	-	2000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) a) ii)(Dry Abrasion resistance (Average of three test specimens))	-	2000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) a) i)( Indivdual Dry Abrasion Resistance )	-	2000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 7.3 & 9.1.4, Table 3, SI No. (ii) b)(Compressive strength (Average of eight test specimens))	-	2000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 7.3 & 9.1.4, Table 3, SI No. (ii) a)( Indivdual Compressive strength)	-	2000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 7.3 & 9.1.4, Table 3, SI No. (i) b)(Water absorption (Average of three test specimens))	-	2000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 7.3 & 9.1.4, Table 3, SI No. (i) a)( Indivdual Water absorption)	-	2000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 7.2 & 9.1.3, Table 2, SI No. (ix)(Deviation from squareness)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 7.2 & 9.1.3, Table 2, SI No. (viii)(Indivdual Ratio of wearing face area and Plan area (Asw/Asp))	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 7.2 & 9.1.3, Table 2, SI No. (viii)(Ratio of wearing face area and Plan area (Asw/Asp))	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 7.2 & 9.1.3, Table 2, SI No. (vii)(Indivdual Plan Area (Asp))	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 7.2 & 9.1.3, Table 2, SI No. (vii)(Plan Area (Asp))	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 7.2 & 9.1.3, Table 2, SI No. (vi)(Indivdual Thickness of wearing Layer)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 7.2 & 9.1.3, Table 2, SI No. (vi)(Thickness of wearing Layer)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Indivdual Arris/chamfer, Depth)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Arris/chamfer, Depth)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Indivdual Arris/chamfer, Width)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Arris/chamfer, Width)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 7.2, Table No. 2, SI No. (iv) (Indivdual Aspect Ratio, L/Th)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 7.2, Table No. 2, SI No. (iv) (Aspect Ratio, L/Th)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 7.2, Table No. 2, SI No. (iii) (Indivdual Thickness, Th)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 7.2, Table No. 2, SI No. (iii) (Thickness, Th)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 7.2, Table No. 2, SI No. (ii) (Indivdual Length, L)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 7.2, Table No. 2, SI No. (ii) (Length, L)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 7.2, Table No. 2, SI No. (i) (Indivdual Width, W)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 7.2, Table No. 2, SI No. (i) (Width, W)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 6.3 (Bonding and Delamination between the layers of paver blocks)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 7.1.3 (Colour and Texture)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clauses 7.1.2 & 9.1.2 (Visual Inspection)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 7.1.1 (General Quality)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.2- TABLE-2- (i) IS-15658 (Annex-B)(Individual Width - Lower)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.2- TABLE-2- (i) IS-15658 (Annex-B)(Average Width -Lower)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.2- TABLE-2- (i) IS-15658 (Annex-B)(Individual Width - Higher)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.2- TABLE-2- (i) IS-15658 (Annex-B)(Average Width -Higher)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 3.20(Spacer nibs)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
10(Marking)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
cl.5(Cement)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5.2(Mineral Admixture)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5.3(Chemical Admixtures)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5.4(Coarse and Fine Aggregates)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5.5(Pigments)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5.6(Water)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.

Complete

IS 12823 (2015)

Prelaminated Particle Boards from Wood and other Lignocellulosic Material - Specification ( First Revision )

All Grade / Type / Size / Designation

14500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 4(Grades & Types)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 6(Manufacture)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 7(Finish)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 8(Dimensions & Tolerances)	-	1500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 10.2(Test For Density)	-	1500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 10.3(Test For Moisture Content)	-	1500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 10.4(For Water AbsorptionTest )	-	1500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 10.5(For Swelling in water Test )	-	1500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 10.6(Tesr For Modulus Of Elasticity & Mudulus Of Rupture)	-	2000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 10.7(For Determination of Tensile Strength Perpendicular to Surface)	-	2000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 10.8(For Determination of Tensile Strength Perpendicular to Surface After Ageing Test)	-	2000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 10.9(Test For Screw Withdrawal Strength)	-	1500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 10.10 & Annex C( Test For Abrasion Resistance)	-	1500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 10.11 & Annex D( Test For Resistance to Steam)	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 10.12 & Annex E( Test For Crack Resistance)	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 10.13 & Annex F( Test For Resistance to Cigarette Burn)	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 10.14 & Annex G( Test For Resistance to Stain)	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 4(Grades & Types)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 6(Manufacture)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 7(Finish)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 8(Dimensions & Tolerances)	-	1500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 10.2(Test For Density)	-	1500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 10.3(Test For Moisture Content)	-	1500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 10.4(For Water AbsorptionTest )	-	1500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 10.5(For Swelling in water Test )	-	1500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 10.6(Tesr For Modulus Of Elasticity & Mudulus Of Rupture)	-	2000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 10.7(For Determination of Tensile Strength Perpendicular to Surface)	-	2000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 10.8(For Determination of Tensile Strength Perpendicular to Surface After Ageing Test)	-	2000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 10.9(Test For Screw Withdrawal Strength)	-	1500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 10.10 & Annex C( Test For Abrasion Resistance)	-	1500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 10.11 & Annex D( Test For Resistance to Steam)	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 10.12 & Annex E( Test For Crack Resistance)	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 10.13 & Annex F( Test For Resistance to Cigarette Burn)	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 10.14 & Annex G( Test For Resistance to Stain)	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 10.14 & Annex G( Test For Resistance to Stain)	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 10.13 & Annex F( Test For Resistance to Cigarette Burn)	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 10.12 & Annex E( Test For Crack Resistance)	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 10.11 & Annex D( Test For Resistance to Steam)	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 10.10 & Annex C( Test For Abrasion Resistance)	-	1500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 10.9(Test For Screw Withdrawal Strength)	-	1500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 10.8(For Determination of Tensile Strength Perpendicular to Surface After Ageing Test)	-	2000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 10.7(For Determination of Tensile Strength Perpendicular to Surface)	-	2000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 10.6(Tesr For Modulus Of Elasticity & Mudulus Of Rupture)	-	2000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 10.5(For Swelling in water Test )	-	1500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 10.4(For Water AbsorptionTest )	-	1500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 10.3(Test For Moisture Content)	-	1500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 10.2(Test For Density)	-	1500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 8(Dimensions & Tolerances)	-	1500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 7(Finish)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 6(Manufacture)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 4(Grades & Types)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 10.15(Test for Formaldehyde Content/Emission)	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.

Complete

IS 432 : Part 1 (1982)

Mild Steel and Medium Tensile Steel Bars and Hard-Drawn Steel Wire for Concrete Reinforcement: Part 1 Mild Steel and Medium Tensile Steel Bars

All type of Grade/Type/Size/Designation

3500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 5.1(Workmanship)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 6.2(Diameter & Ovality)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 6.2(Weight)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 8.2(Bend test)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 9.3(Press)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 5.1(Workmanship)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 6.1(Diameter)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 6.2(Weight)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 8.1(ultimate tensile stress, yield stress and percentage elongation)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 9.3(Press)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 5.1(Workmanship)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 6.2(Diameter & Ovality)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 6.2(Weight)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 8(Physical Requirements)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 9.3(Press)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause -4, 4.3(TITANIUM)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause -4, 4.2(VANADIUM)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause -4, 4.1(NIOBIUM)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause -4, 4.1(Molybdenum)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause -4, 4.1(Chromium)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause -4, 4.1(Nickel)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause -4, 4.1( ALUMINIUM)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause -4, 4.1(SILICON)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause -4, 4.1(NITROGEN)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause -4, 4.1(MANGANESE)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause -4, 4.1(PHOSPHURS)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause -4, 4.1(SULPHUR)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause -4, 4.1( CARBON)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 8.1 Table 1(Elongation)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 8.1 Table 1(Yield Stress)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 8.1(Elongation)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 8.1(Yield Stress)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 9.3(Bend test)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 6.1(Size)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 9.3(Press)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 8(UTM)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 6.2(Weight)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 6.2(Diameter & Ovality)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 5.1(Workmanship)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7(Tolerance)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 5.1(Workmanship)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 6.2(Diameter & Ovality)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 6.2(Weight)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 8(UTM)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 9.3(Press)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 4.1(Workmanship)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 5 & 6(Diameter)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 7(UTM)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 8.3(Bending To Both Side At 90°, Then Straight)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 5.1(IS 432 Part 1)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 6.2(IS 1732)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 8.1(IS 1608 Part 1)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 4(Any Instrumental Method/Chemical Method)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 4(By Calculation)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 4(By Calculation)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 4(Any Instrumental Method/Chemical Method)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 5.1(Freedom from Defect)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 6.2(Mass)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 8.1(Ultimate Tensile Stress)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 4(Boron)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 4(By Calculation)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 4(By Calculation)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 4(Copper)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.1 & 9.2(Yield Strength - IS: 1608 (P1))	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.1 & 9.2(Elongation on SoA 5.65mm GL - IS: 1608 (P1))	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
11(Marking)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 5.1(Freedom from Defect)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 6.2(Mass)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 8.1(Ultimate Tensile Stress)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 4(Boron)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 4(Carbon Equivalent)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 4(Ni+V+Ti)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 4(Copper)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 4(Copper)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.

Complete

IS 14587 (2023)

Prelaminated Medium Density Fibre Board - Specification

All Grade / Type / Size / Designation

17000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5.1(Medium Density Fibre (MDF) Board)	-	2000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-7(Finish)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-8.1(Dimensions of prelaminated MDF)	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-8.2(Tolerances)	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-8.2.1(Edge straightness)	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-9.1 S.No-(1), i(Density, kg/m3)	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-9.1 S.No-(1), ii(Variation from mean density, percent)	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-9.1 S.No-(1), iii(Moisture content, percent)	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-9.1 S.No-(1), iv(Variation from mean moisture content, percent (absolute))	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-9.1 S.No-(1), v(Linear expansion (thickness swelling in water), due to general absorption after 24 h soaking, percent, Max)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-9.1 S.No-(1), vi(Internal bond strength, N/mm2, Min)	-	2500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-9.1 S.No-(1), vii,a(After cyclic test)	-	2500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-9.1 S.No-(1), vii,b(After accelerated water resistance test)	-	2500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-9.1 S.No-(1), viii(Modulus of rupture, N/mm2 , Min)	-	2500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-9.1 S.No-(1), ix(Modulus of elasticity, N/mm2 , Min)	-	2500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-9.1 S.No-(1), x,(Screw withdrawal strength, ????????, Min)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-9.1 S.No-(1), xi(Formaldehyde content (Fc), mg/100 g for oven dry board)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-9.1 S.No-(1), xii(Steady-state formaldehyde emission (Fc), mg/m3)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-9.1 S.No-(1), xiii(Abrasion resistance in number of revolutions, Min, (Type 1 to 4))	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-9.1 S.No-(1), xiv(Resistance to steam/water vapours)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-9.1 S.No-(1), xv(Resistance to crack)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-9.1 S.No-(1), xvi(Resistance to a cigarette burn)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-9.1 S.No-(1), xvii(Resistance to stain)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-11.2(Specific Requirement)	-	2000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-12(Marking)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.

Complete

IS 407 (1981)

Specification for brass tubes for general purposes (Third Revision)

All type of Grade/Type/Size/Designation

10500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4/4.1("MANUFACTURE-The tubes shall be solid drawn and supplied in straight lengths. Their ends shall be clean and square with the axis of the tube.")	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6/6.1(FREEDOM FROM DEFECTS)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7/7.1 & 7.1.1(CONDITION)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8/8.1 & 8.2(SIZES AND TOLERANCES-Mean Outside Dia)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8/8.1 & 8.2(SIZES AND TOLERANCES-Mean Wall thickness)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8/8.1 & 8.2(SIZES AND TOLERANCES-Length)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9/9.1/Appendix A(PRESSURE TESTS-Hydraulic Test)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9/9.2(PRESSURE TESTS-Pneumatic Test)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
10/10.1-Table 2(PHYSICAL TEST- Hardness (HV)-IS : 1501 (Part 1))	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
10/10.2-Table 2(PHYSICAL TEST- Tensilt Test - IS : 2655)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
10/10.3(PHYSICAL TEST- Drifting Test- (For tubes upto and Including 100 mm nom OD))	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
10/10.4 (10.4.1)("PHYSICAL TEST-Flattening Test (For Tubes ≤ 2.5 mm Wall Thickness and not Exceeding 100 mm Outside Diameter)")	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
10/10.4 (10.4.2)(PHYSICAL TEST-Flattening Test (For Tubes ≥ 2.5 mm Wall Thickness and More Than 100 mm Outside Diameter))	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
10/10.5(PHYSICAL TEST- Double Bend TestDouble Bend Test ( For Round Tubes ≤ 2.5 mm Wall Thickness and Over 100 mm Outside Diameter ))	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
10/10.6(PHYSICAL TEST- Mercurous Nitrate Test- IS : 2305)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
11/11.1(MARKING)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
11/11.1.1(MARKING)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5(Chemical Composition - IS 3685)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.

Complete

IS 319 (2007)

Free cutting brass bars, rods and section - Specification (Fifth Revision)

All type of Grade/Type/Size/Designation

5000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.0(Freedom from defects)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.0(Dimension and Tolerances)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.1 Table 1(Cu)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.1 Table 1(Pb)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.1 Table 1(Fe)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.1 Table 1(Total other impurities excluding iron)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.1 Table 1(Zn)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9.1 Table-2(Tensile Strength)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9.1 Table-2(Elongation)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9.2(Vickers Hardness)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
10.1(Mercurous Nitrate Test)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
14(Marking)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.

Complete

IS 318 (1981)

Specification for leaded tin bronze ingots and castings (Second Revision)

All type of Grade/type/Size/Designation

4500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(SIZE AND SHAPE)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6(FREEDOM FROM DEFECTS)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
4, Table 2.(MECHANICAL PROPERTIES)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
3, Table 1.(CHEMlCAL COMPOSITION)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.2(Dimension)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1(Mass)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.2(Freedom from defects-Castings)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.1(Freedom from defects-Ingots)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
4.1, Table 2(Elongation)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
4.1, Table 2(0.2% Proof stress)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
4.1, Table 2(Tensile strength)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5(Pressure Test)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8(Marking)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5(Pressure Test)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8(Marking)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5(Pressure Test - IS 318)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8(Marking)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.

Complete

IS 12406 (2021)

Medium density fibre boards for general purpose - Specification

All Grade / Type / Size / Designation

9000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clauses 5.2, 9 and 10.2.2(Density)	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Clauses 5.2, 9 and 10.2.2(Density)	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Clauses 5.2, 9 and 10.2.2(Variation from mean density)	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Clauses 5.2, 9 and 10.2.2(Moisture Content)	-	1500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Clauses 5.2, 9 and 10.2.2(Variation from mean moisture content)	-	1500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Clauses 5.2, 9 and 10.2.2(Linear expansion (Thickness Swelling in Water) Due to general Absorption after 24h soaking)	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Clauses 5.2, 9 and 10.2.2(Internal Bond Strength)	-	1500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Clauses 5.2, 9 and 10.2.2(Internal Bond strength (i) (After Cyclic test) (ii) (After accelerated water resistance test))	-	1500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Clauses 5.2, 9 and 10.2.2(Modulus of Rupture a) Avg. Value b) Min. Individual)	-	1500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Clauses 5.2, 9 and 10.2.2(Modulus of Elasticity a) Avg. Value b) Min. Individual)	-	1500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Clauses 5.2, 9 and 10.2.2(Screw withdrawl strength (i) Face (ii) Edge (For thickness >12mm))	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Clauses 5.2, 9 and 10.2.2(Formaldehyde Content (i) For Formaldehyde Class, E1 (ii) For Formaldehyde Class, E2)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Clauses 5.2, 9 and 10.2.2(Steady State Formaldehyde emission (Fc (i) For Formaldehyde Class, E1 (ii) For Formaldehyde Class, E2)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
5 Table 1(DIMENSIONS)	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
3.1(" The constructional details of different tools covered in this part shall be as given in Fig. 8.1.1 to 8.1.10, Fig. 8.2.1 to 8.2.8 and Fig. 8.3.1 to 8.3.7.")	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
2.1("The constructional details of different components covered in this part shall be as given in Fig. 4.1 to 4.35.")	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.

Complete

IS 280 (2006)

Mild steel wire for general engineering purposes (Fourth Revision)

All type of Grade/Type/Size/Designation

6500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 7 & Table 1(Diameter & Difference Between Two Reading On Any Two Diameters)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 9(Tensile Test On UTM)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 11(Workmanship)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 13(Workmanship)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 7 & Table 1(Diameter & Difference Between Two Reading On Any Two Diameters)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 9(Tensile Test On UTM)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 11(Workmanship)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 13(Workmanship)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 7 & Table 1(Diameter & Difference Between Two Reading On Any Two Diameters)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 9(Tensile Test On UTM)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 11(Workmanship)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 13(Workmanship)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6 AND AS PER IS 7887(MICRO ALLOY)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6 AND AS PER IS 7887(ALUMINIUM)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6 AND AS PER IS 7887(PHOSPHORUS)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6 AND AS PER IS 7887(SULPHUR)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6 AND AS PER IS 7887(MANGANESE)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6 AND AS PER IS 7887(SILICON)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6 AND AS PER IS 7887(CARBON)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7 & 8(Ovality)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7 & 8(Diameter)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9.2(Wrapping Test)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9.3(Bend test)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
10(Finish)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
11(Coating test)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
13(Freedom from defects)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 13(Workmanship)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 11(Workmanship)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 9(Tensile Test On UTM)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 7 & Table 1(Diameter & Difference Between Two Reading On Any Two Diameters)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 7 & Table 1(Diameter & Difference Between Two Reading On Any Two Diameters)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 9(Tensile Test On UTM)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 11(Workmanship)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 13(Workmanship)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 6 and Note 3 of IS 7887(Any Instrumental Method/Chemical Method)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 6 and Note 3 of IS 7887(Copper)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
14(Packing)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
15(Marking)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 6 and Note 3 of IS 7887(Copper)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.

Complete

IS 5509 (2021)

Fire Retardant Plywood - Specification ( Third Revision )

All Grade / Type / Size / Designation

12450 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.3 (Table 1)(b) 6 mm and above)	-	2500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
4.1(Flame retardant chemicals)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
4.2(Flame retardant and preservative treatment)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
4.3(Treatment)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5(PREPARATION FOR TREATMENT)	-	2000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.1.1(Treatment of Plywood by Pressure Impregnation after Manufacture)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.1.2(Soaking Treatment)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.2(Choice of Treatment)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7(CONDITIONING AFTER TREATMENT)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.1(Dimensions)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.2(Thickness)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.3(Tolerance)	-	2500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9(WORKMANSHIP AND FINISH)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
10(SAMPLING AND CRITERIA FOR CONFORMITY)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
11 (a)(For flammability)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
11 (b)(For flame penetration)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
11 (c)(For rate of burning)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
12.1 Table - 2 (i)(Moisture content, percent, Max)	-	3000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
12.1 Table - 2 (ii)(Flammability (see Note 1), minutes, Min)	-	3000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
12.1 Table - 2 (iii)(Flame penetration (see Note 2), minutes, Min)	-	3000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
12.1 Table - 2 (iv)(Rate of burning (see Note 3), minutes, Min)	-	3000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
12.2(Other Tests)	-	2000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
14(Marking)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.

Complete

IS 278 (2009)

Galvanized steel barbed wire for fencing - Specification (Fourth Revision)

All type of Grade/Type/Size/Designation

6500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Type A/Type B)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5 Table-1(Sizes Diameter of Line wire)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5 Table-1(Sizes Diamater of Point wire)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5 Table-1(Sizes Mass of Completed barbed wire)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5 Table-1(Sizes Distance between two barbs)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5 Table-1(Sizes No. of Lays between the two consequtive barbs)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1(Manufacture)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.2(Manufacture)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.2(Manufacture)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.3(Manufacture)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8(CHROMATING)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9.1(Freedom from defects)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9.2(Freedom from defects)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9.2(Freedom from defects)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9.2(Freedom from defects)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
12.1(Tensile Strength)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
12.1(Breaking load)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
12.2.1(Mass of zinc coating (line wire))	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
12.2.2(Mass of zinc coating (point wire))	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
12.2(Uniformity of zinc coating)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
12.3(Ductility)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 6 . Table 1 of IS 7887 (Grade : 1,2,3,4,4M,6,6M,7,7M,8,8M,9,10,10M)(Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 6 . Table 1 of IS 7887 (Grade : 1,2,3,4,4M,6,6M,7,7M,8,8M,9,10,10M)(Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 6 . Table 1 of IS 7887 (Grade : 1,2,3,4,4M,6,6M,7,7M,8,8M,9,10,10M)(Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 6 . Table 1 of IS 7887 (Grade : 1,2,3,4,4M,6,6M,7,7M,8,8M,9,10,10M)(Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 6 . Table 1 of IS 7887 (Grade : 1,2,3,4,4M,6,6M,7,7M,8,8M,9,10,10M)(Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 7.2(Cut Angle)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 7.2(Length of Barbs)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 7.2(Finishing of Barbs)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 7.1(General)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
11(Sampling)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
13(Marking)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.

Complete

IS 210 (2009)

Grey iron castings - Specification (First Revision)

All type of Grade/Type/Size/Designation

4500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Chemical Composition(chemical composition shall be as agreed to between the purchaser and the manufacturer.))	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1(WORKMANSHIP AND FINISH)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
10.1(FREEDOM FROM DEFECTS)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
10.2(FREEDOM FROM DEFECTS)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
13(SIZE OF TEST BARS-Diameter)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
13(SIZE OF TEST BARS-Length)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
15, Table 3(TENSIL.E TEST- IS 1608 Part1 )	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
16, Table 3(Hardness Test)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
17,Annex B(TRANSVERSE TEST)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
18(HYDROSTATIC TEST)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6(Chemical Composition(chemical composition shall be as agreed to between the purchaser and the manufacturer.))	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1(WORKMANSHIP AND FINISH)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
10.1(FREEDOM FROM DEFECTS)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
10.2(FREEDOM FROM DEFECTS)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
13(SIZE OF TEST BARS-Diameter)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
13(SIZE OF TEST BARS-Length)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
15, Table 3(TENSIL.E TEST- IS 1608 Part1 )	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
16, Table 3(Hardness Test)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
17,Annex B(TRANSVERSE TEST)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
18(HYDROSTATIC TEST)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9(IS 7754)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9(IS 7754)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9(Microstructure)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
21(Marking)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9(Microstructure)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.

Complete

IS 1659 (2004)

Block boards - Specification (Fourth Revision)

All Grade / Type / Size / Designation

7000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
9.2.6(Spot test - Annexure L)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9.2.5(Modulus of elasticity - MINIMUM INDIVIDUAL - Annexure K)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9.2.5(Modulus of elasticity - AVERAGE - Annexure K)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9.2.5(Modulus of rupture - MINIMUM INDIVIDUAL - Annexure K)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9.2.5(Modulus of rupture - AVERAGE - Annexure K)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9.2.4(Mycological Test [for MR grade only] - Annexure J)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9.2.3(Adhesion of Plies - Annexure H)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9.2.2 (Resistance to water - Annexure G, Annexure H [For MR Grade])	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9.2.2 (Resistance to water - Annexure G, Annexure H [For BWP grade])	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9.2.1(Dimensional Changes caused by humidity Change in local planeness - Annexure F)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9.2.1(Dimensional Changes caused by humidity - Delamination - Annexure F)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9.2.1(Dimensional Changes caused by humidity - Change in thickness - at 40% RH - Annexure F)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9.2.1(Dimensional Changes caused by humidity - Change in Thickness - at 90% RH - Annexure F)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9.2.1(Dimensional Changes caused by humidity - Change in Length - at 40% RH - Annexure F)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9.2.1(Dimensional Changes caused by humidity - Change in Length - at 90% RH - Annexure F)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.3(Dimensional Requirements - Variation in thickness - Annexure E)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.3(Dimensional Requirements - Squareness - Annexure D)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.3(Dimensional Requirements - Edge Straightness - Annexure D)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.3(Dimensional Requirements - Thickness - Annexure E)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.3(Dimensional Requirements - Width - 8.1.4)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.3(Dimensional Requirements - Length - 8.1.4)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.1.3, 6.3.3, IS 1328(Visual Inspection - Permissible Defects - IS 1328 [test method for DECORATIVE type])	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.1.3, 6.3.3, IS 303(Visual Inspection - Permissible Defects - IS 303 [test method for COMMERCIAL type])	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9.2.6 (mechanical)(Spot test - Annexure L)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
cl. 11(marking)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
cl. 11.1(marking - BIS certification marking)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.

Complete

IS 1328 (1996)

Veneered Decorative Plywood -Specification

All Grade / Type / Size / Designation

8000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Grade - For BWR)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
4.1(Grade - For MR)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
4.2(Type - For Type 1)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
4.2(Type - For Type 2)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1.1(Requirements - Open splits, checks or open joints - For Type 1 - Cl. 7.1.1)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.2.1(Requirements - Open splits, checks or open joints - For Type 2 - Cl. 7.2.1)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1.2(Requirements - Other defects - For Type 1 - Cl. 7.1.2)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.2.2(Requirements - Other defects - For Type 2 - Cl. 7.2.2.)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1.3(Requirements - Other Charcteristics and Manufacturing Defects - For Type 1 - Cl. 7.1.3)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.2.3(Requirements - Other Charcteristics and Manufacturing Defects - For Type 2 - Cl. 7.2.3)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8(Dimensions & Tolerances - Length - Cl. 8)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8(Dimensions & Tolerances - Width - Cl. 8)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8(Dimensions & Tolerances - Thickness - Cl. 8)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8(Dimensions & Tolerances - Edge Straightness - Annexure C)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8(Dimensions & Tolerances - Squareness - Annexure C)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9(Finish - Cl. 9.1, 8.3)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9(Finish - Cl. 9.2, 8.3)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
11(Tests - Moisture Content - Part 1 of IS 1734)	-	2500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
11(Tests - Water Resistance Test - Cl. 11.1.2.1 [for MR Grade])	-	2500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
11(Tests - Water Resistance Test - Cl. 11.1.2.2 [for BWR Grade])	-	2500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.

Complete

IS 710 (2010)

Marine plywood - Specification (Second Revision)

All Grade / Type / Size / Designation

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
11.1(MARKING)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
11.2(MARKING)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1(WORKMANSHIP AND FINISH )	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
7.2(WORKMANSHIP AND FINISH )	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
7.3(WORKMANSHIP AND FINISH )	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
7.5(WORKMANSHIP AND FINISH )	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
6.1(DIMENSIONS)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
6.1(DIMENSIONS)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
6.2(DIMENSIONS)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
6.3(DIMENSIONS)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
6.3(DIMENSIONS)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
9.1.1(MOISTURE CONTENT)	-	1500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
9.1.2 , 9.1.2.1(Glue Adhesion in Dry State)	-	2000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
9.1.2 , 9.1.2.2(Glue Adhesion in Dry State)	-	2000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
9.1.3 , 9.1.3.1.1(Water resistance test)	-	2000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
9.1.3 , 9.1.3.1.2(Water resistance test)	-	2000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
9.1.5(Mycological test)	-	2000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
9.1.5 , 9.1.3.1.1(Mycological test)	-	2000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
9.1.5 , 9.1.3.1.2(Mycological test)	-	2000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
9.1.4(Tensile strength)	-	2000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
9.1.6 (Table 3)(Static bending strength)	-	2000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
9.1.6 (Table 3)(Static bending strength)	-	2000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
9.1.7 (Table 4)(Wet bending strength)	-	2000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
9.1.7 (Table 4)(Wet bending strength)	-	2000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
9.1.8(Retention of preservative)	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 9.1.7 (Table 4) (Cl. 9.1.7 (Table 4) (Modulus of Rupture: Across the Face Grain: Minimum Individual))	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 9.1.7 (Table 4) (Cl. 9.1.7 (Table 4) (Modulus of Rupture: Across the Face Grain: Average))	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 9.1.7 (Table 4) (Cl. 9.1.7 (Table 4) (Modulus of Rupture: Along the Face Grain: Minimum Individual))	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 9.1.7 (Table 4) (Cl. 9.1.7 (Table 4) (Modulus of Rupture: Along the Face Grain: Average))	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 9.1.7 (Table 4)(Cl. 9.1.7 (Table 4) (Modulus of Elasticity: Across the Face Grain: Minimum Individual))	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 9.1.7 (Table 4) (Cl. 9.1.7 (Table 4) (Modulus of Elasticity: Across the Face Grain: Average))	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 9.1.7 (Table 4) (Cl. 9.1.7 (Table 4) (Modulus of Elasticity: Along the Face Grain: Minimum Individual))	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 9.1.7 (Table 4) (Cl. 9.1.7 (Table 4) (Modulus of Elasticity: Along the Face Grain: Average))	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 9.1.6 (Table 3) (Cl. 9.1.6 (Table 3) (Modulus of Rupture: Across the Face Grain: Minimum Individual))	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 9.1.6 (Table 3) (Cl. 9.1.6 (Table 3) (Modulus of Rupture: Across the Face Grain: Average))	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 9.1.6 (Table 3) (Cl. 9.1.6 (Table 3) (Modulus of Rupture: Along the Face Grain: Minimum Individual))	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 9.1.6 (Table 3) (Cl. 9.1.6 (Table 3) (Modulus of Rupture: Along the Face Grain: Average))	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 9.1.6 (Table 3)(Cl. 9.1.6 (Table 3) (Modulus of Elasticity: Across the Face Grain: Minimum Individual))	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 9.1.6 (Table 3) (Cl. 9.1.6 (Table 3) (Modulus of Elasticity: Across the Face Grain: Average))	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 9.1.6 (Table 3) (Cl. 9.1.6 (Table 3) (Modulus of Elasticity: Along the Face Grain: Minimum Individual))	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 9.1.6 (Table 3) (Cl. 9.1.6 (Table 3) (Modulus of Elasticity: Along the Face Grain: Average))	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 9.1.4(Cl. 9.1.4 (Tensile Strength: Sum of the Tensile Strength in two directions))	-	2000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 9.1.4 (Cl. 9.1.4 (Tensile Strength: Perpendicular to grain))	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 9.1.4(Cl. 9.1.4 (Tensile Strength: Parallel to grain))	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl.9.1.5,9.1.3.1.1 (Cl.9.1.5 (Mycological Test),9.1.3.1.1 (Glue Shear Strength: Individual))	-	2000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl.9.1.5,9.1.3.1.1 (Cl.9.1.5 (Mycological Test),9.1.3.1.1 ( Glue Shear Strength: Average))	-	2000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 9.1.3, 9.1.3.1.1 (Cl. 9.1.3 (Water Resistance Test) , 9.1.3.1.1 (Glue Shear Strength: Individual))	-	2000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 9.1.3, 9.1.3.1.1 (Cl. 9.1.3 (Water Resistance Test ), 9.1.3.1.1 (Glue Shear Strength: Average))	-	2000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 9.1.2, 9.1.2.1 (Cl. 9.1.2 (Glue Adhesion in Dry State), 9.1.2.1 ( Glue Shear Strength: Individual))	-	2000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 9.1.2, 9.1.2.1 (Cl. 9.1.2 (Glue Adhesion in Dry State), 9.1.2.1 ( Glue Shear Strength: Average ))	-	2000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
cl.5.1(manufacture - Veneers)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
cl.5.1(manufacture - Veneers - moisture content)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
cl.5.1.1(manufacture - Veneers - Defects in Veneers)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
cl.5.2.2(Assembly - Thickness of Veneers)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.

Complete

IS 15778 (2007)

Chlorinated polyvinyl chloride (Cpvc) pipes for potable hot and cold water distribution supplies - Specification

All Grade

100000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5 Table 1(Classification of pipes)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.2.1 Annex B(Chloride Content of Resin)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.3(Compound Properties)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.3.1 Annex B(Chloride content)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.3.2 Annex C(Verification of the Malfunction Temperature, Tmal: )	-	5000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.3.2 IS 13360 (Part 3/See 1)(Density)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1 IS 12235 (Part 1) Table 2(Dimension of Pipes: Mean outside Diameter)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1,7.1.1 IS 12235 (Part 1) Table 2(Outside Diameter at any point)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1.2 IS 12235 (Part 1) Table 2(Wall Thickness )	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1.3 (Effective length)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8(Pipe Ends)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9(PHYSICAL AND CHEMICAL CHARACTERISTICS)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9.1(Visual Appearance)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9.1(Visual Appearance)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9.2 IS 12235 (Part 3)(Opacity)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 9.3,IS 4985 Cl. 10.3(Lead (first extraction))	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 9.3,IS 4985 Cl. 10.3(Lead (third extraction))	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 9.3,IS 4985 Cl. 10.3(Dialkyl tin C4 and higher homologues measured as tin (third extraction))	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 9.3,IS 4985 Cl. 10.3(Cadmium (for all three extracts) )	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 9.3,IS 4985 Cl. 10.3(Mercury (for all three extracts) )	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 9.3,IS 4985 Cl. 10.3(Other toxic substances such as 'di-n-octyl-tin- s-s bis iso-octyl mercapto acetate' and 'butyl stearate' (third extraction) )	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 9.3,IS 4985 Cl. 10.3(Other toxic substances including di-n-octyl-tin- s-s bis iso-octyl mercapto acetate' and 'butyl stearate')	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9.4 IS 12235(Part 5/Sec 1 and Sec 2)(Reversion Test : When tested by the method prescribed in IS 12235(Part 5/Sec 1 and Sec 2), a length of pipe 200 + 20 mm long shall not alter in length by more than 5 percent.)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9.5 IS 12235(Part 2)(Vicat Softening Temperature: When tested by the method prescribed in IS 12235(Part 2), the Vicat softening temperature of the specimen shall not be less than 110°C.)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9.6 IS 12235(Part 14)(Density)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
10(Mechanical Properties)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
10.1 Table 3 IS 12235 (Part 8/Sec 1)(Hydrostatic Characteristics)	-	10000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
10.1 Table 3 IS 12235 (Part 8/Sec 1)(Hydrostatic Characteristics)	-	10000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
10.1 Table 3 IS 12235 (Part 8/Sec 1)(Hydrostatic Characteristics)	-	10000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
10.2 Table 3 IS 12235 (Part 8/Sec 1)(Thermal Stability by Hydrostatic Pressure Testing)	-	10000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
10.3 IS 4985 Table 4(Resistance to External Blow at O°C: When tested by the method prescribed in IS 4985, with classified striker mass and drop height as given in Table 4, the pipe shall have a true impact rate of not more than 10 percent.)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
10.4 IS 12235(Part 19)(Flattening Test)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
10.5 IS 12235(Part 13)(Tensile Strength : When tested by the method prescribed in IS 12235(Part 13), the tensile strength at yield shall not be less than 50 MPaat 27±2°C. )	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5 Table 1(Classification of pipes)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.2.1 Annex B(Chloride Content of Resin)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.3(Compound Properties)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.3.1 Annex B(Chloride content)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.3.2 Annex C(Verification of the Malfunction Temperature, Tmal: )	-	10000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.3.2 IS 13360 (Part 3/See 1)(Density)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1 IS 12235 (Part 1) Table 2(Dimension of Pipes: Mean outside Diameter)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1,7.1.1 IS 12235 (Part 1)Table 2(Outside Diameter at any point (Minimum))	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1.2 IS 12235 (Part 1)Table 2(Wall Thickness (Minimum))	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1.3 (Effective length)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.0(Pipe Ends)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9.0(PHYSICAL AND 1CHARACTERISTICS)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9.1(Visual Appearance)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9.1(Visual Appearance)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9.2 IS 12235 (Part 3)(Opacity)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 9.3,IS 4985 Cl. 10.3(Lead (first extraction))	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 9.3,IS 4985 Cl. 10.3(Lead (third extraction))	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 9.3,IS 4985 Cl. 10.3(Dialkyl tin C4 and higher homologues measured as tin (third extraction))	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 9.3,IS 4985 Cl. 10.3(Cadmium (for all three extracts) )	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 9.3,IS 4985 Cl. 10.3(Mercury (for all three extracts) )	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 9.3,IS 4985 Cl. 10.3(Other toxic substances such as 'di-n-octyl-tin- s-s bis iso-octyl mercapto acetate' and 'butyl stearate' (third extraction) )	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 9.3,IS 4985 Cl. 10.3(Other toxic substances including di-n-octyl-tin- s-s bis iso-octyl mercapto acetate' and 'butyl stearate')	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9.4 IS 12235(Part 5/Sec 1 and Sec 2)(Reversion Test : When tested by the method prescribed in IS 12235(Part 5/Sec 1 and Sec 2), a length of pipe 200 + 20 mm long shall not alter in length by more than 5 percent.)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9.5 IS 12235(Part 2)(Vicat Softening Temperature: When tested by the method prescribed in IS 12235(Part 2), the Vicat softening temperature of the specimen shall not be less than 110°C.)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9.6 IS 12235(Part 14)(Density)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
10.0(Mechanical Properties)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
10.1 Table 3 IS 12235 (Part 8/Sec 1)(Hydrostatic Characteristics)	-	10000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
10.1 Table 3 IS 12235 (Part 8/Sec 1)(Hydrostatic Characteristics)	-	10000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
10.1 Table 3 IS 12235 (Part 8/Sec 1)(Hydrostatic Characteristics)	-	10000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
10.2 Table 3 IS 12235 (Part 8/Sec 1)(Thermal Stability by Hydrostatic Pressure Testing)	-	10000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
10.3 IS 4985 Table 4(Resistance to External Blow at O°C: When tested by the method prescribed in IS 4985, with classified striker mass and drop height as given in Table 4, the pipe shall have a true impact rate of not more than 10 percent.)	-	10000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
10.4 IS 12235(Part 19)(Flattening Test)	-	10000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
10.5 IS 12235(Part 13)(Tensile Strength : When tested by the method prescribed in IS 12235(Part 13), the tensile strength at yield shall not be less than 50 MPaat 27±2°C. )	-	10000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1.2(Wall Thickness (Maximum))	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1.1(Outside Diameter at any point (Maximum))	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.3(K value Test)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.3.3(Density)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.

Complete

IS 15801 (2008)

Polypropylene - Random copolymer pipes for hot and cold water supplies - Specification

All Grade

58000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 4( Designation)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 7(Dimensions Of Pipes)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 8(Visual Appearance)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 9.1(Hydraulic Characteristics)	-	5000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 9.2(Fusion Compatibility)	-	5000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 9.3(Reversion Test )	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 9.4 & Annex B(Impact Strength)	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 9.5(Density)	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 9.6(Melt Flow Rate)	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 9.7(Carbon Black Content & Dispersion)	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 9.8(Thermal Stability By Hydrostatic Pressure Testing)	-	40000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 9.9(Opacity)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5(Colour)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.

Complete

IS 303 (1989)

Plywood for General Purposes -

BWR & MR Grade

6500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
11.4, Table 4(Static Bending Strength - Modulus of Rupture - Across the Face Grain - Minimum Individual)	-	750	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
11.4, Table 4(Static Bending Strength - Modulus of Rupture - Across the Face Grain - Average)	-	750	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
11.4, Table 4(Static Bending Strength - Modulus of Rupture - Along the Face Grain - Minimum Individual)	-	750	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
11.4, Table 4(Static Bending Strength - Modulus of Rupture - Along the Face Grain - Average)	-	750	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
11.4, Table 4(Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Minimum Individual)	-	750	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
11.4, Table 4(Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Average)	-	750	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
11.4, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-	750	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
11.4, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-	750	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
11.2.2(Glue Adhesion - Mycological test - 11.2.2, Part 7 of IS 1734 [for MR Garde only])	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
11.2.1(Glue Adhesion - Water resistance test - 11.2.1.1 [for MR Grade])	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
11.2.1(Glue Adhesion - Water resistance test - 11.2.1.1 [for BWR Grade])	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
11.3(Moisture Content - Part 1 of IS 1734)	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
8(Dimensions & Tolerances - Edge Straightness - Annexure C)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
8(Dimensions & Tolerances - Squareness - Annexure C)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
8(Dimensions & Tolerances - Thickness - Cl. 8)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
8(Dimensions & Tolerances - Width - Cl. 8)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
8(Dimensions & Tolerances - Length - Cl. 8)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
9(Workmanship and Finish - Cl.9, 8.3, Annexure C)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
9(Workmanship and Finish - Cl.9, 8.3, Annexure C)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
5.2, Table 1, Table 2(Quality Requirements - Cl. 5.2)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
5.1(Type - For BB Type)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
5.1(Type - For AB Type)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
5.1(Type - For AA Type)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
4(Grade - For MR grade)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
4(Grade - For BWR grade)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
cl. 13.1(marking)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
cl. 13.2(marking)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.

Complete

IS 8042 (2015)

White portland cement - Specification (Third Revision)

8500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5 - Table - 1 i(Ratio of percentage of lime to percentages of silica, alumina and iron oxide - Cl 4 of IS 4032:1985)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
5 - Table - 1 ii(Iron oxide - Cl 4.5 of IS 4032:1985)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
5 - Table - 1 iii(Insoluble residue - Cl 4.10 of IS 4032:1985)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
5 - Table - 1 iv(Magnesia - Cl 4.8 of IS 4032:1985)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
5 - Table - 1 v(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 4.9 of IS 4032:1985)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
5 - Table - 1 vi(Loss on ignition - Cl 4.2 of IS 4032:1985)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
5 - Table - 1 vii(Chloride content - Cl 4.13 of IS 4032:1985)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
6 -Table 2- i(Fineness 4031 Part 2)	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
6 -Table 2- ii- a(Expansion by Le Chatelier- 4031 Part 3)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
6 -Table 2- ii- a(Expansion after aeration - 4031 Part 3)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
6 -Table 2- ii- b(Expansion by Autoclave- 4031 Part 3)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
6-Table 2- ii- b(Expansion after aeration- 4031 Part 3)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
6 -Table 2- iii- a(Setting Time Initial- 4031 Part 5)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
6 -Table 2-iii- b(Setting Time Final- 4031 Part 5)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
6 -Table 2- iv- a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
6 -Table 2- iv- b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
6 -Table 2- iv- c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
6 -Table 2- v(Transverse Strength - IS 4031 Part 8 (Optional))	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
6 -Table 2- vi(Degree of whiteness-Annex B)	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
5 - Table - 1 i(Ratio of percentage of lime to percentages of silica, alumina and iron oxide - Cl 4 of IS 4032:1985)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
5 - Table - 1 ii(Iron oxide - Cl 4.5 of IS 4032:1985)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
5 - Table - 1 iii(Insoluble residue - Cl 4.10 of IS 4032:1985)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
5 - Table - 1 iv(Magnesia - Cl 4.8 of IS 4032:1985)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
5 - Table - 1 v(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 4.9 of IS 4032:1985)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
5 - Table - 1 vi(Loss on ignition - Cl 4.2 of IS 4032:1985)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
5 - Table - 1 vii(Chloride content - Cl 4.13 of IS 4032:1985)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
6 -Table 2- i(Fineness 4031 Part 2)	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
6 -Table 2- ii- a(Expansion by Le Chatelier- 4031 Part 3)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
6 -Table 2- ii- a(Expansion after aeration - 4031 Part 3)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
6 -Table 2- ii- b(Expansion by Autoclave- 4031 Part 3)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
6-Table 2- ii- b(Expansion after aeration- 4031 Part 3)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
6 -Table 2- iii- a(Setting Time Initial- 4031 Part 5)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
6 -Table 2-iii- b(Setting Time Final- 4031 Part 5)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
6 -Table 2- iv- a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
6 -Table 2- iv- b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
6 -Table 2- iv- c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
6 -Table 2- v(Transverse Strength - IS 4031 Part 8 (Optional))	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
6 -Table 2- vi(Degree of whiteness-Annex B)	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
6, table-2, ii(Whiteness)	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 6 Table 2, SI No. (v) (Compressive strength of Transverse Specimen, 672 ± 4 h)	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 6 Table 2, SI No. (v) (Compressive strength of Transverse Specimen, 168 ± 2 h)	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 6 Table 2, SI No. (v) (Compressive strength of Transverse Specimen, 72 ± 1 h)	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 6 Table 2, SI No. (v) (Transverse Strength, 672 ± 4 h)	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 6 Table 2, SI No. (v) (Transverse Strength, 168 ± 2 h)	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 6 Table 2, SI No. (v) (Transverse Strength, 72 ± 1 h)	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.

Complete

IS 15328 (2003)

Unplasticized Non-Pressure Polyvinyl Chloride ( PVC -U ) Pipes for use in Underground Drainage and Sewerage Systems -

All Grade

24000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5,5.2(Composition of the material The material shall contain a minimum of 0.3 percent of rutile grade titanium dioxide.)	-	1000	-
6.1,6.1.1 IS 12235 (Part 1) Table 1(Dimension of Pipes: Mean outside Diameter, dem)	-	1000	-
6.1,6.1.1 IS 12235 (Part 1) Table 1(Outside Diameter at any point, de)	-	1000	-
6.1.2 IS 4985 Table 2(Wall Thickness, e )	-	1000	-
6.1.3 (Length of Pipe)	-	1000	-
6.1.4, Table 3(Dimensions of integral sockets and spigot ends :- a) Elastomeric Sealing Ringsockets and spigot ends i)Meean inside dia. Of socket, dsm)	-	1000	-
6.1.4, Table 3(ii) Min. depth of engagement, A. )	-	1000	-
6.1.4 Table 3(iii) Depth of sealing Zone C )	-	1000	-
6.1.4, Table 3(iv) Length of spigot, l1)	-	1000	-
6.1.4, Table 3(v) Chamfer length, H : Approx.)	-	1000	-
6.1.4.1 (wall thickness of sockets e2 min=0.9e )	-	1000	-
6.1.4.1 (e3min=0.75e)	-	1000	-
6.1.4, Table 4(b) Solvent Cement Joint sockets and spigot ends i) Mean inside dia. Of socket, dsm)	-	1000	-
6.1.4, Table 4(ii) Length of Solvent Cement socket, l2 )	-	1000	-
6.1.4, Table 4(iii) Length of spigot, l1, 100 mm Min.)	-	1000	-
6.1.4, Table 4(iv) Chamfer length, H, 7 mm Approx.)	-	1000	-
7(Physical characteristics )	-	1000	-
7.1(Appearance:- )	-	1000	-
7.1(Appearance:- )	-	1000	-
7.2(Colour )	-	1000	-
7.3 IS 1223S ( Part 2)(Vicat Softening Temperature When determined according to IS 1223S ( Part 2), shall not be lessthan 79°C.)	-	1000	-
7.4 IS 1223S ( Part 5)(Longitudinal Reversion: When tested according to the methodprescribed in IS 1223S ( Part 5), shall not exceed ± 5 percent. The pipe shall not exhibit any blisters, bubbles or crackson completion of the test.)	-	1000	-
8(MECHANICAL CHARACTERISTICS)	-	1000	-
8.1 Annex B(Resistance to External Blows at 0ºC: When tested according to the method prescribed in Annex B, the pipes hall have a true impact rate of not more than I0 percent.)	-	1000	-
8.2 Annex C Table 5(Ring Stiffness: When tested according to the method described in Annex C,the ring stiffness of the pipe shall be as stated in Table 5)	-	1000	-
8.3 IS 12235 ( Part 8/ Sec 1 ) Table 6(Resistance to internal Hydrostatic Pressure(Type Test) a) Acceptance Test:(1h at 27 0 C) )	-	2000	-
8.3 IS 12235 ( Part 8/ Sec 1 ) Table 6(b) Type Test:(1000h at 60 0 C) )	-	1000	-
9 9.1, IS 5382(JOINTS:- a) Elastomeric Sealing Rings)	-	1000	-
9.2 IS 14182(b) Solvent cement)	-	1000	-
10(Performance requirements)	-	1000	-
10.1.1 Annex D(Internal hydrostatic pressure test for elastomeric sealing ring joints)	-	2000	-
10.1.2 Annex E(Internal negative hydrostatic pressure test (internal vacuum) for elastomeric sealing ring joints)	-	2000	-
10.2.1(Internal hydrostatic pressure test for solvent cemented Joints)	-	2000	-
10.2.2(Internal negative hydrostatic pressure test (internal vacuum)for solvent cemented joints)	-	2000	-
'7.5 (amdt.7)(Effect on Water (Type test))	-	1000	-
5.3(Qualitative)	-	1000	-
12(Marking)	-	1000	-

Complete

IS 455 (2015)

Portland slag cement - Specification

8500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7 Table 1 v(Transverse strength (optional) IS 4031(Part 8) )	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7 Table 1 iv c(Compretsive Strenqth 672 ± 4 hr IS 4031(Part 6))	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7 Table 1 iv b(Compretsive Strenqth 168 ± 2 hr IS 4031(Part 6))	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7 Table 1 iv a(Compretsive Strenqth .72 ± 1 hr IS 4031(Part 6))	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7 Table 1 iii b(Setting Time ( by Vicat Apparatus ), Final IS 4031(Part 5))	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7 Table 1 iii a(Setting Time ( by Vicat Apparatus ),Initial IS 4031(Part 5))	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7 Table 1 ii b(Soundness, Autoclave expansion IS 4031(Part 3) )	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7 Table 1 ii a(Soundness, Le-Chate1ier expansion IS 4031(Part 3) )	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7 Table 1 i(Fineness IS 4031(Part 2))	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6 - Table - 1 vii( Alkali content as (Na2O + 0.658 K2O) - Cl 4.11 of IS 4032:1985)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6 - Table - 1 vi(Chloride content - Cl 4.13 of IS 4032:1985)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6 - Table - 1 v(Loss on ignition - Cl 6.2 of IS 4032:1985)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6 - Table - 1 iv(Sulphide sulphur (S) - Cl 6.12 of IS 4032:1985)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6 - Table - 1 iii(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 6.11 of IS 4032:1985)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6 - Table - 1 ii(Magnesia - Cl 6.8 of IS 4032:1985)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6 - Table - 1 i(Insoluble residue - Cl 6.9 of IS 4032:1985)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7 Table 1 v(Transverse strength (optional) IS 4031(Part 8) )	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7 Table 1 iv c(Compretsive Strenqth 672 ± 4 hr IS 4031(Part 6))	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7 Table 1 iv b(Compretsive Strenqth 168 ± 2 hr IS 4031(Part 6))	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7 Table 1 iv a(Compretsive Strenqth .72 ± 1 hr IS 4031(Part 6))	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7 Table 1 iii b(Setting Time ( by Vicat Apparatus ), Final IS 4031(Part 5))	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7 Table 1 iii a(Setting Time ( by Vicat Apparatus ),Initial IS 4031(Part 5))	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7 Table 1 ii b(Soundness, Autoclave expansion IS 4031(Part 3) )	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7 Table 1 ii a(Soundness, Le-Chate1ier expansion IS 4031(Part 3) )	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7 Table 1 i(Fineness IS 4031(Part 2))	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6 - Table - 1 vii( Alkali content as (Na2O + 0.658 K2O) - Cl 4.11 of IS 4032:1985)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6 - Table - 1 vi(Chloride content - Cl 4.13 of IS 4032:1985)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6 - Table - 1 v(Loss on ignition - Cl 6.2 of IS 4032:1985)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6 - Table - 1 iv(Sulphide sulphur (S) - Cl 6.12 of IS 4032:1985)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6 - Table - 1 iii(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 6.11 of IS 4032:1985)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6 - Table - 1 ii(Magnesia - Cl 6.8 of IS 4032:1985)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6 - Table - 1 i(Insoluble residue - Cl 6.9 of IS 4032:1985)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 7 Table-2(Cl. 7 Table-2 i (Fineness ))	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 7 Table-2(Cl. 7 Table-2 ii a (Expansion after aeration ))	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 7 Table-2(Cl. 7 Table-2 ii a (Soundness , Le Chatelier Expansion ))	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 7 Table-2(Cl. 7 Table-2 ii b (Expansion after aeration ))	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 7 Table-2(Cl. 7 Table-2 ii b (Soundness , Autoclave Expansion ))	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 7 Table-2(Cl. 7 Table-2 iii a (Setting time Initial))	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 7 Table-2(Cl. 7 Table-2 iii b (Setting time Final))	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 7 Table-2(Cl. 7 Table-2 iv a (Compressive Strength 72±1 hr IS))	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 7 Table-2(Cl. 7 Table-2 iv b (Compressive Strength 168±2 hr ))	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 7 Table-2(Cl. 7 Table-2 iv c (Compressive Strength 672±4 hr) )	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 7 Table-2(Cl. 7 Table-2 v (Transverse Strength (Optional) )	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
11.3(Consistency(IS:4031(Pt-4)-1988)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.

Complete

IS 15058 (2002)

PVC water - Stops at transverse contraction joints for use in masonry and concrete dams - Specification

All Grade

13000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.2 Table 1,vii) f) Annex C(Stability in effects of alkalies test Dimension change)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
3.2 Table 1,vii) c) Annex C(Stability in effects of alkalies test Change in hardness at 7 days )	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
3.2 Table 1,vii) b) Annex C(Stability in effects of alkalies test Weight decrease at 7 day)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
3.2 Table 1,vii) a) Annex C(Stability in effects of alkalies test Weight increase at 7 day)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
3.2 Table 1,vii) e) Annex C(Stability in effects of alkalies test Weight decrease at 28 days)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
3.2 Table 1,vii) d) Annex C(Stability in effects of alkalies test Weight increase at 28 days)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
3.2 Table 1, iv) Annex A(Water absorption)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
3.2 Table 1, v) Annex G of IS 9766(Cold bend temperature at which samples does not crack)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
3.2 Table 1, iii) IS 13360 (Part 5/Sec 11)(Hardness (Shore A))	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
3.2 Table 1,vi) b) Annex B(Accelerated extraction test: Elongation)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
3.2 Table 1, ii) IS 13360 (Part 5/Sec 1)(Elongation,)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7(PACKING : The water-stop shall be packed in coil form, the inside diameter of which shall not be less than 300 mm)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
3.2 Table 1,vi) a) Annex B(Accelerated extraction test Tensile strength)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
3.2 Table 1, i) IS 13360 (Part 5/Sec 1)(Tensile strength)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
3(PVC WATER-STOPS)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
3.1(Materials)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
3.2(Test Requirements)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
3.3(Colour)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
4,4.1 Fig.1(SHAPE AND DIMENSIONS)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
4.1.1 (Tolerances on Dimensions a) Width)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
4.1.1 (Tolerances on Dimensions b) Thickness)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5, 5.1(WORKMANSHIP AND FINISH)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5.2(WORKMANSHIP AND FINISH)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
3.2 Table 1,vii) f) Annex C(Stability in effects of alkalies test Dimension change)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
3.2 Table 1,vii) c) Annex C(Stability in effects of alkalies test Change in hardness at 7 days )	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
3.2 Table 1,vii) b) Annex C(Stability in effects of alkalies test Weight decrease at 7 day)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
3.2 Table 1,vii) a) Annex C(Stability in effects of alkalies test Weight increase at 7 day)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
3.2 Table 1,vii) e) Annex C(Stability in effects of alkalies test Weight decrease at 28 days)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
3.2 Table 1,vii) d) Annex C(Stability in effects of alkalies test Weight increase at 28 days)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
3.2 Table 1, iv) Annex A(Water absorption)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
3.2 Table 1, v) Annex G of IS 9766(Cold bend temperature at which samples does not crack)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
3.2 Table 1, iii) IS 13360 (Part 5/Sec 11)(Hardness (Shore A))	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
3.2 Table 1,vi) b) Annex B(Accelerated extraction test: Elongation)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
3.2 Table 1, ii) IS 13360 (Part 5/Sec 1)(Elongation,)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7(PACKING : The water-stop shall be packed in coil form, the inside diameter of which shall not be less than 300 mm)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
3.2 Table 1,vi) a) Annex B(Accelerated extraction test Tensile strength)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
3.2 Table 1, i) IS 13360 (Part 5/Sec 1)(Tensile strength)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
3(PVC WATER-STOPS)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
3.1(Materials)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
3.2(Test Requirements)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
3.3(Colour)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
4,4.1 Fig.1(SHAPE AND DIMENSIONS)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
4.1.1 (Tolerances on Dimensions a) Width)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
4.1.1 (Tolerances on Dimensions b) Thickness)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5, 5.1(WORKMANSHIP AND FINISH)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5.2(WORKMANSHIP AND FINISH)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
3.2 Table 1,vii) f) Annex C(Stability in effects of alkalies test Dimension change)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
3.2 Table 1,vii) c) Annex C(Stability in effects of alkalies test Change in hardness at 7 days )	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
3.2 Table 1,vii) b) Annex C(Stability in effects of alkalies test Weight decrease at 7 day)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
3.2 Table 1,vii) a) Annex C(Stability in effects of alkalies test Weight increase at 7 day)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
3.2 Table 1,vii) e) Annex C(Stability in effects of alkalies test Weight decrease at 28 days)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
3.2 Table 1,vii) d) Annex C(Stability in effects of alkalies test Weight increase at 28 days)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
3.2 Table 1, iv) Annex A(Water absorption)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
3.2 Table 1, v) Annex G of IS 9766(Cold bend temperature at which samples does not crack)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
3.2 Table 1, iii) IS 13360 (Part 5/Sec 11)(Hardness (Shore A))	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
3.2 Table 1,vi) b) Annex B(Accelerated extraction test: Elongation)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
3.2 Table 1, ii) IS 13360 (Part 5/Sec 1)(Elongation,)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7(PACKING : The water-stop shall be packed in coil form, the inside diameter of which shall not be less than 300 mm)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
3.2 Table 1,vi) a) Annex B(Accelerated extraction test Tensile strength)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
3.2 Table 1, i) IS 13360 (Part 5/Sec 1)(Tensile strength)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
3(PVC WATER-STOPS)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
3.1(Materials)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
3.2(Test Requirements)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
3.3(Colour)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
4,4.1 Fig.1(SHAPE AND DIMENSIONS)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
4.1.1 (Tolerances on Dimensions a) Width)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
4.1.1 (Tolerances on Dimensions b) Thickness)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5, 5.1(WORKMANSHIP AND FINISH)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5.2(WORKMANSHIP AND FINISH)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
3.2 Table 1,vii) f) Annex C(Stability in effects of alkalies test Dimension change)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
3.2 Table 1,vii) c) Annex C(Stability in effects of alkalies test Change in hardness at 7 days )	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
3.2 Table 1,vii) b) Annex C(Stability in effects of alkalies test Weight decrease at 7 day)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
3.2 Table 1,vii) a) Annex C(Stability in effects of alkalies test Weight increase at 7 day)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
3.2 Table 1,vii) e) Annex C(Stability in effects of alkalies test Weight decrease at 28 days)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
3.2 Table 1,vii) d) Annex C(Stability in effects of alkalies test Weight increase at 28 days)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
3.2 Table 1, iv) Annex A(Water absorption)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
3.2 Table 1, v) Annex G of IS 9766(Cold bend temperature at which samples does not crack)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
3.2 Table 1, iii) IS 13360 (Part 5/Sec 11)(Hardness (Shore A))	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
3.2 Table 1,vi) b) Annex B(Accelerated extraction test: Elongation)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
3.2 Table 1, ii) IS 13360 (Part 5/Sec 1)(Elongation,)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7(PACKING : The water-stop shall be packed in coil form, the inside diameter of which shall not be less than 300 mm)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
3.2 Table 1,vi) a) Annex B(Accelerated extraction test Tensile strength)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
3.2 Table 1, i) IS 13360 (Part 5/Sec 1)(Tensile strength)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
3(PVC WATER-STOPS)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
3.1(Materials)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
3.2(Test Requirements)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
3.3(Colour)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
4,4.1 Fig.1(SHAPE AND DIMENSIONS)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
4.1.1 (Tolerances on Dimensions a) Width)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
4.1.1 (Tolerances on Dimensions b) Thickness)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5, 5.1(WORKMANSHIP AND FINISH)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5.2(WORKMANSHIP AND FINISH)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.

Complete

IS 1489 : Part 2 (2015)

Portland - Pozzolana cement - Specification: Part 2 calcined clay based

8500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6 - Table - 1 i(Insoluble residue - Cl 7.4 of IS 4032:1985)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6 - Table - 1 ii(Magnesia - Cl 7.2 of IS 4032:1985)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6 - Table - 1 iii(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 7.3 of IS 4032:1985)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6 - Table - 1 iv(Loss on ignition - Cl 7.1 of IS 4032:1985)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6 - Table - 1 v(Chloride content - Cl 4.13 of IS 4032:1985)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6 - Table - 1 vi( Alkali content as (Na2O + 0.658 K2O) - Cl 4.11 of IS 4032:1985)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7 -Table 2- i(Fineness 4031 Part 2)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7 -Table 2- ii- a(Expansion by Le Chatelier- 4031 Part 3)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7 -Table 2- ii- a(Expansion after aeration - 4031 Part 3)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7 -Table 2- ii- b(Expansion by Autoclave- 4031 Part 3)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7 -Table 2- ii- b(Expansion after aeration- 4031 Part 3)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7 -Table 2- iii- a(Setting Time Initial- 4031 Part 5)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7 -Table 2-iii- b(Setting Time Final- 4031 Part 5)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7 -Table 2- iv- a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7 -Table 2- iv- b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7 -Table 2- iv- c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7 -Table 2- v(Transverse Strength - IS 4031 Part 8 (Optional))	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7 -Table 2- vi(Drying Shrinkage- IS 4031 Part 10)	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6 - Table - 1 i(Insoluble residue - Cl 7.4 of IS 4032:1985)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6 - Table - 1 ii(Magnesia - Cl 7.2 of IS 4032:1985)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6 - Table - 1 iii(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 7.3 of IS 4032:1985)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6 - Table - 1 iv(Loss on ignition - Cl 7.1 of IS 4032:1985)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6 - Table - 1 v(Chloride content - Cl 4.13 of IS 4032:1985)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6 - Table - 1 vi( Alkali content as (Na2O + 0.658 K2O) - Cl 4.11 of IS 4032:1985)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7 -Table 2- i(Fineness 4031 Part 2)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7 -Table 2- ii- a(Expansion by Le Chatelier- 4031 Part 3)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7 -Table 2- ii- a(Expansion after aeration - 4031 Part 3)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7 -Table 2- ii- b(Expansion by Autoclave- 4031 Part 3)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7 -Table 2- ii- b(Expansion after aeration- 4031 Part 3)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7 -Table 2- iii- a(Setting Time Initial- 4031 Part 5)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7 -Table 2-iii- b(Setting Time Final- 4031 Part 5)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7 -Table 2- iv- a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7 -Table 2- iv- b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7 -Table 2- iv- c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7 -Table 2- v(Transverse Strength - IS 4031 Part 8 (Optional))	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7 -Table 2- vi(Drying Shrinkage- IS 4031 Part 10)	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 7 Table 2 SI No. (v) (Compressive strength of Transverse Specimen, 672 ± 4 h)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 7 Table 2 SI No. (v) (Compressive strength of Transverse Specimen, 168 ± 2 h)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 7 Table 2 SI No. (v) (Compressive strength of Transverse Specimen, 72 ± 1 h)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 7 Table 2 SI No. (v) (Transverse Strength, 672 ± 4 h)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 7Table 2 SI No. (v)(Transverse Strength, 168 ± 2 h)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 7Table 2 SI No. (v)(Transverse Strength, 72 ± 1 h)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
11(Marking)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
4(RAW MATERIAL)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
11(Marking)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.

Complete

IS 14735 (1999)

Unplasticized Polyvinyl Chloride (UPVC) Injection Moulded Fittings for Soil and Waste Discharge System for Inside and Outside Buildings Including Ventilation and Rain Water System -

All Grade

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
19(Marking)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
3(Type of Fitting)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
4(Size Designation)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5(Colour of fittings)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1,Table 1(Wall thickness)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.2 ,Table 2&3(Socket Dimensions)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.3(Dimensions of waste trap(Nahani Trap)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8(Sealing Rings)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
10(Workmanship)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
11(Design requirements)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
11.1(Solvent cement type or Rubber ring type)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
11.2(Socket and spigot configeration)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
11.4,Table 5(Vent cowl)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
11.5,Table 6(Pipe Clips)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
12(Physical test requirements)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
12.1(Visual appearance)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
12.2(Stress relief test)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
12.3(Vicat softening tempewrature)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl.13, IS 12235 (P-7)-2004, (Resistance to Sulphuric Acid)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl.14, Annex A(Titanium Di-Oxide Content)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl.15, Annex B(Sulphated Ash Content)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
16(Mechanical Properties)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
16.1(Impact test)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
17(Watet tightness of joint)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
12.4(Effect on water test)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.4(Chamfer)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
11.3(Access Openings)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Table 4(Dimension of Access Openings)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.

Complete

IS 1489 (Part 1) (2015)

Portland pozzolana cement - Specification: Part 1 fly Ash Based

8500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7 -Table 2- vi(Drying Shrinkage- IS 4031 Part 10)	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7 -Table 2- v(Transverse Strength - IS 4031 Part 8 (Optional))	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7 -Table 2- iv- c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7 -Table 2- iv- b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7 -Table 2- iv- a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7 -Table 2-iii- b(Setting Time Final- 4031 Part 5)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7 -Table 2- ii- b(Expansion after aeration- 4031 Part 3)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7 -Table 2- ii- b(Expansion by Autoclave- 4031 Part 3)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7 -Table 2- ii- a(Expansion after aeration - 4031 Part 3)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7 -Table 2- ii- a(Expansion by Le Chatelier- 4031 Part 3)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7 -Table 2- i(Fineness 4031 Part 2)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6 - Table - 1 vi( Alkali content as (Na2O + 0.658 K2O) - Cl 4.11 of IS 4032:1985)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6 - Table - 1 v(Chloride content - Cl 4.13 of IS 4032:1985)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6 - Table - 1 iv(Loss on ignition - Cl 7.1 of IS 4032:1985)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6 - Table - 1 iii(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 7.3 of IS 4032:1985)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6 - Table - 1 ii(Magnesia - Cl 7.2 of IS 4032:1985)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6 - Table - 1 i(Insoluble residue - Cl 7.4 of IS 4032:1985)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6 - Table - 1 vi( Alkali content as (Na2O + 0.658 K2O) - Cl 4.11 of IS 4032:1985)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6 - Table - 1 v(Chloride content - Cl 4.13 of IS 4032:1985)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6 - Table - 1 iv(Loss on ignition - Cl 7.1 of IS 4032:1985)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6 - Table - 1 iii(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 7.3 of IS 4032:1985)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6 - Table - 1 ii(Magnesia - Cl 7.2 of IS 4032:1985)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6 - Table - 1 i(Insoluble residue - Cl 7.4 of IS 4032:1985)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7 -Table 2- vi(Drying Shrinkage- IS 4031 Part 10)	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7 -Table 2- v(Transverse Strength - IS 4031 Part 8 (Optional))	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7 -Table 2- iv- c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7 -Table 2- iv- b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7 -Table 2- iv- a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7 -Table 2-iii- b(Setting Time Final- 4031 Part 5)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7 -Table 2- iii- a(Setting Time Initial- 4031 Part 5)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7 -Table 2- ii- b(Expansion after aeration- 4031 Part 3)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7 -Table 2- ii- b(Expansion by Autoclave- 4031 Part 3)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7 -Table 2- ii- a(Expansion after aeration - 4031 Part 3)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7 -Table 2- ii- a(Expansion by Le Chatelier- 4031 Part 3)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7 -Table 2- i(Fineness 4031 Part 2)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6 - Table - 1 vi( Alkali content as (Na2O + 0.658 K2O) - Cl 4.11 of IS 4032:1985)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6 - Table - 1 v(Chloride content - Cl 4.13 of IS 4032:1985)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6 - Table - 1 iv(Loss on ignition - Cl 7.1 of IS 4032:1985)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6 - Table - 1 iii(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 7.3 of IS 4032:1985)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6 - Table - 1 ii(Magnesia - Cl 7.2 of IS 4032:1985)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6 - Table - 1 i(Insoluble residue - Cl 7.4 of IS 4032:1985)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6 - Table - 1 vi( Alkali content as (Na2O + 0.658 K2O) - Cl 4.11 of IS 4032:1985)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6 - Table - 1 v(Chloride content - Cl 4.13 of IS 4032:1985)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6 - Table - 1 iv(Loss on ignition - Cl 7.1 of IS 4032:1985)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6 - Table - 1 iii(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 7.3 of IS 4032:1985)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6 - Table - 1 ii(Magnesia - Cl 7.2 of IS 4032:1985)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6 - Table - 1 i(Insoluble residue - Cl 7.4 of IS 4032:1985)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 7 Table 2 SI No. (v) (Compressive strength of Transverse Specimen, 672 ± 4 h)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 7 Table 2 SI No. (v) (Compressive strength of Transverse Specimen, 168 ± 2 h)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 7 Table 2 SI No. (v) (Compressive strength of Transverse Specimen, 72 ± 1 h)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 7 Table 2 SI No. (v) (Transverse Strength, 672 ± 4 h)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 7Table 2 SI No. (v)(Transverse Strength, 168 ± 2 h)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 7Table 2 SI No. (v)(Transverse Strength, 72 ± 1 h)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
11(Marking)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
4(RAW MATERIAL)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
11(MARKING)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
1()	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7 -Table 2- iii- a(Setting Time Initial- 4031 Part 5)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.

Complete

IS 12818 (2010)

Unplasticized polyvinyl chloride (Pvc - U) screen and casing pipes for bore/tubewells - Specification (Second Revision)

All Grade

16000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
9.6(Vicat Softening Temperature IS 12235 (Part 2).)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9.5(Tensile Strength IS 12235(Part 13))	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9.4 and Table 14(Resistance to External Blows at 0 ?C IS 12235 (Part 9))	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9.3(Density IS 12235 (Part 14))	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9.2(Internal Diameter)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9.1( Visual Appearance)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9.1(Visual Appearance)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.4.1 and Table 13 Fig 3B & 4B(Dimensions of sealing elements)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.4.1 and Table 13 Fig 3B & 4B(Dimensions of sealing elements)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.4.1 and Table 13 Fig 3B & 4B(Dimensions of sealing elements)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.4.1 and Table 13 Fig 3B & 4B(Dimensions of sealing elements)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.4.1 and Table 13 Fig 3B & 4B(Dimensions of sealing elements)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.4.1 and Table 13 Fig 3B & 4B(Dimensions of sealing elements)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.4.1 and Table 13 Fig 3B & 4B(Dimensions of sealing elements)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.4(Sealing rings - Hardness)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.1 to 8.3 and Table 11 &12 Fig 3A & 4A(THREADING OF SCREEN ANDCASING PIPES. IS 554.)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.1 to 8.3 and Table 11 &12 Fig 3A & 4A(THREADING OF SCREEN ANDCASING PIPES. IS 554.)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.5 and Table 10 Fig 2A & 2B(Approximate Free Passage Area, in Percent (Mean Value) for Width of Slot (w))	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.5 and Table 10 Fig 2A & 2B(Minimum number of slots on the circumference of the cross-section.)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.5 and Table 10 Fig 2A & 2B(Summation of slot lengths over internal circumference of the cross- section.)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.4 Table 8 & 9 Fig 1(Segmental length, l5)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.4 Table 8 & 9 Fig 1(Segmental length, l4)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.4 Table 8 & 9 Fig 1(Segmental length, l3)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.4 Table 8 & 9 Fig 1(Effective length, l2)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.3.2(Rib height)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.3.1(No.of Ribs)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.2 and Table 5, 6 & 7 Fig 1B(Wall thickness, Max)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.2 and Table 5, 6 & 7 Fig 1B(Wall thickness, Min)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.2 and Table 5, 6 & 7 Fig 1B(Mean Outer Diameter over Connection)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.2 and Table 5, 6 & 7 Fig 1B(Outer Diameter at any point, Max)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.2 and Table 5, 6 & 7 Fig 1B(Outer Diameter at any point , Min)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.2 and Table 5, 6 & 7 Fig 1B(Mean Outer Diameter of Pipe , Max)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.2 and Table 5, 6 & 7 Fig 1B(Mean Outer Diameter of Pipe, Min)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.2 and Table 5, 6 & 7 Fig 1B(Nominal Diameter)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.2 and Table 5, 6 & 7 Fig 1B(DIMENSIONS - Casing Pipes)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1 and Table 1, 2, 3, & 4 Fig 1A & 1B(Wall thickness)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1 and Table 1, 2, 3, & 4 Fig 1A & 1B(Mean Outer Diameter over Connection)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1 and Table 1, 2, 3, & 4 Fig 1A & 1B(Outer Diameter at any point )	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1 and Table 1, 2, 3, & 4 Fig 1A & 1B(Mean Outer Diameter of Pipe)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1 and Table 1, 2, 3, & 4 Fig 1A & 1B(Nominal Diameter)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
4.1.2 (Ref. Cl 11 of IS 4669)(Composition -Sulphated ash content )	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
4.1.2 (Ref. Cl 5.1. of IS 4669)(Composition - Loss on heating )	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
4.1.1 (Ref. 3.4.1. of IS 10151)(Composition - The monomer content (VCM content) in the resin - Annex A ofIS 10151)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5(COLOUR)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.4(Sealing elements a. Elastomeric material b. Shore A hardness of sealing Elements )	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.4(Width b)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.3.1 & 8.3.2 (Threading of casing pipe (from 100 to 200 DN Table – 11 & Fig. 3A) & (from 250 to 400 DN Table – 12 & Fig. 4A) Outside diameter d1(+0, -0.3) d2 d3 D1 (+0.3, -0) D2 D4 D5 (+0.3, -0) Z h3 (+0, -0.1) H4 (+0, -0.1) )	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.2(Threading of casing pipe As per IS 554 (from 40 to 80mm DN) Number of threads in 25.4mm Pitch (P) Height of thread (h) Major (Gauge Diameter) d Pitch(d2) Minor (d1) External Thread gauge length Nominal No. of turns of thread max min )	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.5.1 7.5.2 (Slot Dimension (Table 10) Fig 2A & 2B a. Minimum number of slot on the circumference b. Σa±5% c. Mean value of approximate free passage area (%) for width of slot (w) d. Tolerance on width of slot (w) e. Width of material between slot (b))	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5.0(Colour of Pipes)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9.7(Effect on Water a) Lead (first extraction) b) Lead (Third extraction) c) Dialkyl Tin C4 & higher homologues measured as Tin (Third extraction) d) Cadmium (All three extracts) e) Mercury (All three extracts) f) Other Toxic Substances )	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
4.1.2(K-Value as per IS-4669)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
4.1.1 (VCM Content as per IS 10151 (Annex A))	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1(Screen Pipes)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
11(Marking)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5.1(Materials)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8(Packing)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
4.1.3(Cross Chain Length)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.2(Link Twisted (Cross chain))	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.3(The Basic chains)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.9(Case Depth)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8(Marking)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.

Complete

Bureau of Indian Standards

The National Standards Body of India

Delta Testing and Research Laboratories Private Limited

Plot No. C-5, Block - C, Main Kanjhawala Road, Rajiv Nagar, Delhi, North West, Delhi, 110086

9811037450 info@deltatestinglab.com

Scope List