BIS - LIMS (Laboratory Information Management System)

Delta Testing and Research Laboratories Private Limited

Plot No. C-5, Block - C, Main Kanjhawala Road, Rajiv Nagar, Delhi, North West, Delhi, 110086

9811037450 info@deltatestinglab.com

Scope List

Reset

107 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Exclusion

Testing Charges (Excl. Of Taxes)

Facility Type

Effective Date

Validity Date

Remark

IS 14811 (2000)

Rolled copper plate, sheet, strip and foils for general engineering purposes - Specification

All type of Grade/Type/Size/Designation

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.12(Calculation of mass)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl.11 Table-4(Preferred Inside Diameter)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl.11(Dimensions and tolerances)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl.10(Hydrogen embrittlement test)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl.9 table-3(Cupping test, erichsen value)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl.8.3 Table-2(Longitudinal Bend Test Angle, radius)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl.8.3 Table-2(Transverse Bend Test Angle, radius)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl.8.3(Bend test)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl.8.1 Table-1(Hardness)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl.8.1 Table-1(Elongation percent)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl.8.1 Table-1(Tensile strength Mpa)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl.8(Mechnical properties)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl.7(Chemical composition)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl.6(Freedom from defects)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl.12(Calculation of mass)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl.11 Table-4(Preferred Inside Diameter)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl.11(Dimensions and tolerances)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl.10(Hydrogen embrittlement test)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl.9 table-3(Cupping test, erichsen value)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl.8.3 Table-2(Longitudinal Bend Test Angle, radius)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl.8.3 Table-2(Transverse Bend Test Angle, radius)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl.8.3(Bend test)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl.8.1 Table-1(Hardness)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl.8.1 Table-1(Tensile strength Mpa)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl.8(Mechnical properties)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl.7(Chemical composition)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl.6(Freedom from defects)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl.8.1 Table-1(Elongation percent)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.

Complete

21 Aug, 2027

-
-

IS 14650 (2023)

UNALLOYED AND ALLOYED STEEL INGOT AND SEMI-FINISHED PRODUCTS FOR RE-ROLLING PURPOSES - SPECIFICATION (First Revision)

All type of Grade / Type / Size / Designation

7000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause - 7.1(CARBON)	-	6000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause - 7.1(SULPHUR)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause - 7.1(PHOSPHURS)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause - 7.1(MANGANESE)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause - 7.1(NITROGEN)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.

Complete

21 Aug, 2027

-
-

IS 383 (2016)

Coarse and Fine Aggregate for Concrete - Specification (Third Revision)

All Grade / Type / Size / Designation

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.4.1 (a)(mechanical properties- Aggregate Crushing Value/Ten Percent Fines Value)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5.4.1 (b)(mechanical properties- Aggregate Crushing Value/Ten Percent Fines Value)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5.4.2(a)( Aggregates Impact Value)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5.4.2(b)( Aggregates Impact Value)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5.4.3(a)( Aggregate Abrasion Value)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5.4.3(b)( Aggregate Abrasion Value)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.1-Table 7(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Nominal Size of aggregate)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.1-Table 7(i)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 80 mm sieve )	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.1-Table 7(ii)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 63 mm sieve )	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.1-Table 7(iii)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 40 mm sieve )	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.1-Table 7(iv)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 20 mm sieve )	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.1-Table 7(v)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 16 mm sieve )	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.1-Table 7(vi)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 12.5 mm sieve )	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.1-Table 7(vii)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 10 mm sieve )	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.1-Table 7(viii)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 4.75 mm sieve )	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.1-Table 7(ix)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 2.36 mm sieve )	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.1.1-Table 8(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Class)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.1.1-Table 8(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Size)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.1.1-Table 8(i)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 160 mm Sieve)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.1.1-Table 8(i)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 80 mm Sieve)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.1.1-Table 8(ii)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 80 mm Sieve)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.1.1-Table 8(ii)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 40 mm Sieve)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.1.1-Table 8(iii)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 40 mm Sieve)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.1.1-Table 8(iii)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 20 mm Sieve)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.1.1-Table 8(iv)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 20 mm Sieve)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.1.1-Table 8(iv)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 4.75 mm Sieve)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.1.1-Table 8(iv)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 2.36 mm Sieve)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.2-Table 7(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Nominal Size of aggregate)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.2-Table 7(i)(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Percentage Passing through 80 mm sieve)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.2-Table 7(ii)(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Percentage Passing through 63 mm sieve)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.2-Table 7(iii)(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Percentage Passing through 40 mm sieve)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.2-Table 7(iv)(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Percentage Passing through 20 mm sieve)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.2-Table 7(v)(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Percentage Passing through 16 mm sieve)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.2-Table 7(vi)(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Percentage Passing through 12.5 mm sieve)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.2-Table 7(vii)(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Percentage Passing through 10 mm sieve)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.2-Table 7(viii)(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Percentage Passing through 4.75 mm sieve)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.2-Table 7(ix)(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Percentage Passing through 2.36 mm sieve)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.3-Table 9(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Grading Zone)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.3-Table 9(i)(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Percentage Passing through 10mm Sieve )	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.3-Table 9(ii)(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Percentage Passing through 4.75mm Sieve )	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.3-Table 9(iii)(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Percentage Passing through 2.36mm Sieve )	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.3-Table 9(iv)(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Percentage Passing through 1.18mm Sieve )	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.3-Table 9(v)(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Percentage Passing through 600µm Sieve )	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.3-Table 9(vi)(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Percentage Passing through 300µm Sieve )	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.3-Table 9(vii)(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Percentage Passing through 150µm Sieve )	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.4-Table 10(SIZE AND GRADING OF AGGREGATES- All-in-Aggregate Grading-Nominal Size )	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.4-Table 10(i)(SIZE AND GRADING OF AGGREGATES- All-in-Aggregate Grading-Percentage Passing through 80mm Sieve )	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.4-Table 10(ii)(SIZE AND GRADING OF AGGREGATES- All-in-Aggregate Grading-Percentage Passing through 40mm Sieve )	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.4-Table 10(iii)(SIZE AND GRADING OF AGGREGATES- All-in-Aggregate Grading-Percentage Passing through 20mm Sieve )	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.4-Table 10(iv)(SIZE AND GRADING OF AGGREGATES- All-in-Aggregate Grading-Percentage Passing through 4.75mm Sieve )	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.4-Table 10(v)(SIZE AND GRADING OF AGGREGATES- All-in-Aggregate Grading-Percentage Passing through 600µm Sieve )	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.4-Table 10(vi)(SIZE AND GRADING OF AGGREGATES- All-in-Aggregate Grading-Percentage Passing through 150µm Sieve )	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5.7-Table-3-(v) IS: 2386 (P-3)(specific gravity(fine aggregate))	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5.7-Table-3-(Iv) IS: 2386 (P-3)(Water absorption (fine aggregate))	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5.7-Table-3-(III) IS:14959 (P-2)(Water soluble chloride content (fine aggregate))	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5.7-Table-3-(II) IS:4032(Total sulphate content (fine aggregate))	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5.6-IS: 2386 (P-7)(Alkali Aggregate Reaction (fine aggregate))	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5.5-IS: 2386 (P-5)(Soundness (fine aggregate))	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5.2- TABLE-2- (Note-3) IS-2386 (P-2)(Mica content (fine aggregate))	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5.2- TABLE-2- (Note-4) IS-2386 (P-2)(Effect of organic impurities on strength of mortar (fine aggregate))	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5.2- TABLE-2- (Note-4) IS-2386 (P-2)(Effect of organic impurities on strength of mortar (fine aggregate))	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5.2- TABLE-2- (Note-4) IS-2386 (P-2)(Organic impurities (fine aggregate))	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5.2- TABLE-2- (vi) IS-2386 (P-2)(Total deleterious material (fine aggregate))	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5.2- TABLE-2- (iii) IS-2386 (P-1)(Material fine aggregater than 75 micron (fine aggregate))	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5.2- TABLE-2- (ii) IS-2386 (P-2)(Clay lumps (fine aggregate ))	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5.2- TABLE-2- (i) IS-2386 (P-2)(Coal and Lignite (fine aggregate ))	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5.7-Table-3-(v) IS: 2386 (P-3)(specific gravity(coarse aggregate))	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5.7-Table-3-(Iv) IS: 2386 (P-3)(Water absorption (coarse aggregate))	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5.7-Table-3-(III) BN EN: 1744(Water soluble chloride content (coarse aggregate))	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5.7-Table-3-(II) BN EN: 1744(Total sulphate content (coarse aggregate))	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5.6-IS: 2386 (P-7)(Alkali Aggregate Reaction (coarse aggregate))	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5.5-IS: 2386 (P-5)(Soundness (coarse aggregate))	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5.3-IS: 2386 (P-1)(Combined elongation & flakiness index (coarse aggregate))	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5.2- TABLE-2- (vi) IS-2386 (P-2)(Total deleterious material (coarse aggregate))	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5.2- TABLE-2- (iv) IS-2386 (P-2)(Soft fragments (coarse aggregate))	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5.2- TABLE-2- (iii) IS-2386 (P-1)(Material fine aggregater than 75 micron (coarse aggregate))	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5.2- TABLE-2- (ii) IS-2386 (P-2)(Clay lumps (coarse aggregate ))	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5.2- TABLE-2- (i) IS-2386 (P-2)(Coal and Lignite (coarse aggregate ))	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5.5(Soundness By Magnesium Sulphate)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.2(Moisture Content)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.2(Bulking Of Fine Aggregate)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.2(Bulk Density loose)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.2(Bulk Density Rodded)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 5.7- Table 3 (i) (TotalAlkali content as Na2O equivalent )	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 5.6(Nature of Aggregate)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5.5(Soundness By Magnesium Sulphate)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.2(Moisture Content)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.2(Bulk Density loose)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.2(Bulk Density Rodded)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5.3(Elongation Index)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5.3(Flakiness Index)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5.6(Alkali Agregate Reaction )	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5.7 table 3(WaterAbsorption)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5.7 table 3(Specific Gravity)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5.3(Flakiness & Elongation)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5.5 Na2so4/5.5.1 Maso4/5.5.1 (Soundness)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5.7 table 4 (Calcium oxide)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5.5 Na2so4/5.5.1 Maso4/5.5.1 (Soundness)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5.2 (5.2.2, 5.2.1, 5.2.3, shale table-2 ) (Deleterious material (Clay lumps, coal & lignite, material finer than 75 micron IS sieve, Soft fragments,shale))	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
3.2.2 Table 3 ii) IS 1963(Basicity as CaO/SiO2)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 5.6(Dissolved Silica)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 5.6(Reduction in Alkalinity)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 5.1(General)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 5.1(General)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Table 4 Cl. 5.7 (ii)(Total Sulphur as S)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Table 4 Cl. 5.7 (iii)(Total iron as FeO)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Table 5 Cl. 5.7 (i)(Calcium oxide as CaO,)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Table 5 Cl. 5.7 (ii)(Magnesium oxide as MgO)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Table 5 Cl. 5.7 (iii)(Total iron as FeO)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Table 5 Cl. 5.7 (iv)(Basicity as CaO/SiO2)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Table 6 Cl. 5.7 (i)(Calcium oxide as CaO)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Table 6 Cl. 5.7 (ii)(Total sulphur as S)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Table 6 Cl. 5.7 (iii)(Total iron as FeO)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Table 6 Cl. 5.7 (iv)()	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Table 6 Cl. 5.7 (iv)()	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.

Complete

21 Aug, 2027

-
-

IS 1239 : Part 2 (2011)

Steel tubes, tubulars and other steel fittings - Specification: Part 2 steel pipe fittings (Fifth Revision)

All Grade / Type / Size / Designation

8400 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1(Chemical Composition - Sulphur - Laddle Analysis IS 228)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1(Chemical Composition - Phosphorus - Laddle Analysis IS 228)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.1-Table 1( DIMENSIONS OF TUBULARS-Pieces )	-	3000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.1-Table 1( DIMENSIONS OF TUBULARS-Pieces-Approximate Standard Length(A) )	-	3000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.2-Table-2( DIMENSIONS OF TUBULARS-Nipples )	-	3000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.2-Table-2( DIMENSIONS OF TUBULARS-Nipples-A )	-	3000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.2-Table-2( DIMENSIONS OF TUBULARS-Nipples-B )	-	3000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.2-Table-2( DIMENSIONS OF TUBULARS-Nipples-C )	-	3000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.3.1-Table 3(DIMENSIONS OF TUBULARS-Longscrews (Connectors))	-	3000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.3.1-Table 3(DIMENSIONS OF TUBULARS-Longscrews (Connectors)-A)	-	3000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.3.1-Table 3(DIMENSIONS OF TUBULARS-Longscrews (Connectors)-B)	-	3000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.3.1-Table 3(DIMENSIONS OF TUBULARS-Longscrews (Connectors)-C)	-	3000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.3.2(DIMENSIONS OF TUBULARS-Longscrews (Connectors))	-	3000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.3.2(DIMENSIONS OF TUBULARS-Longscrews (Connectors)-The face of the back nut angle)	-	3000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.4.1 -Table 4(Bends and springs)	-	3000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.4.1 -Table 4(Bends and springs-A)	-	3000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.4.1 -Table 4(Bends and springs-B)	-	3000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.4.1 -Table 4(Bends and springs-R)	-	3000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.4.1 -Table 4(Bends and springs-C)	-	3000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.4.1 -Table 4(Bends and springs-D)	-	3000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.4.1 -Table 4(Bends and springs-E)	-	3000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.5-Table 5( Return Bends)	-	3000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.5-Table 5( Return Bends-A)	-	3000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.5-Table 5( Return Bends-B)	-	3000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.6 -Table 6(Sockets)	-	3000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.6 -Table 6(Sockets-A)	-	3000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.6 -Table 6(Sockets-B)	-	3000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.6 -Table 6(Maximum Inside Diameter of Internal Parallel Thread)	-	3000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9(DIMENSIONS OF STEEL FITTINGS (OTHER THAN TUBULARS))	-	3000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9.1-Table 7(Dimensions of Screwed Ends of Fittings-D )	-	3000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9.1-Table 7(Dimensions of Screwed Ends of Fittings-E )	-	3000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9.1-Table 7(Dimensions of Screwed Ends of Fittings-d )	-	3000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9.1-Table 7(Dimensions of Screwed Ends of Fittings-Taper )	-	3000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9.1-Table 8 (Dimensions of Elbows, Tees and Crosses, Equal-A)	-	3000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9.1-Table 9 (Dimensions of Elbows Reducing-A)	-	3000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9.1-Table 9 (Dimensions of Elbows Reducing-B)	-	3000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9.1-Table 10 (Dimensions of Tees, Reducing (on the Branch)-A)	-	3000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9.1-Table 10 (Dimensions of Tees, Reducing (on the Branch)-B)	-	3000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9.1-Table 11 (Dimensions of Tees, Reducing (on the Run and Branch, or on the Run Only)-A)	-	3000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9.1-Table 11 (Dimensions of Tees, Reducing (on the Run and Branch, or on the Run Only)-B)	-	3000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9.1-Table 12(Dimensions of Tees (Increasing on the Branch)-A)	-	3000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9.1-Table 12(Dimensions of Tees (Increasing on the Branch)-B)	-	3000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9.1-Table 13( Dimensions of Crosses, Reducing-A)	-	3000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9.1-Table 13( Dimensions of Crosses, Reducing-B)	-	3000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9.1-Table 14( Elbows, Tees and Crosses, Side Outlet, Equal-A)	-	3000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9.1-Table 14( Elbows, Tees and Crosses, Side Outlet, Equal-B)	-	3000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9.1-Table 15( Dimensions of Elbows, Round, Male and Female, Equal-A)	-	3000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9.1-Table 15( Dimensions of Elbows, Round, Male and Female, Equal-B)	-	3000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9.1-Table 15( Dimensions of Elbows, Round, Male and Female, Equal-Minimum Bore of Male End)	-	3000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9.1-Table 15( Dimensions of Elbows, Round, Male and Female, Equal-Maximum Bore of Male End)	-	3000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9.1-Table 16( Dimensions of Elbows, Equal, 135°-A)	-	3000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9.1-Table 17 (Dimensions of Y-Pieces, Female, Equal-A)	-	3000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9.1-Table 18 (Dimensions of Socket, Reducing-A)	-	3000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9.1-Table 19 (Dimensions of Caps-A)	-	3000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9.1-Table 19 (Dimensions of Caps-T)	-	3000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9.1-Table 20(Dimensions of Plug-Minimum Length of Thread for Basic Gauge)	-	3000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9.1-Table 20(Dimensions of Plug-Minimum Length of Thread for Basic Gauge-S)	-	3000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9.1-Table 20(Dimensions of Plug-Minimum Length of Thread for Basic Gauge-H)	-	3000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9.1-Table 20(Dimensions of Plug-Minimum Length of Thread for Basic Gauge-D)	-	3000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9.1-Table 20(Dimensions of Plug-Minimum Length of Thread for Basic Gauge-K)	-	3000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9.1-Table 21 (Dimensions of Elbows, Tees and Crosses, Male, Equal-A)	-	3000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9.1-Table 22(Dimensions of Y-Pieces and Angle Tees, Male, Equal-A )	-	3000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9.1-Table 22(Dimensions of Y-Pieces and Angle Tees, Male, Equal-B )	-	3000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9.1-Table 23( Dimensions of Twin Elbows and Sweep Tees, Male, Equal-A)	-	3000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9.1-Table 23( Dimensions of Twin Elbows and Sweep Tees, Male, Equal-B)	-	3000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9.1-Table 24(Dimensions of Socket Unions-A )	-	3000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9.1-Table 25 (Dimensions of Pipe Unions-A)	-	3000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9.1-Table 26 (Dimensions of Union Bends-A )	-	3000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9.1-Table 26 (Dimensions of Union Bends-B )	-	3000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9.1-Table 27 (Dimensions of Hexagon Bushes-L)	-	3000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9.1-Table 27 (Dimensions of Hexagon Bushes-T)	-	3000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9.1-Table 27 (Dimensions of Hexagon Bushes-A)	-	3000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9.1-Table 27 (Dimensions of Hexagon Bushes-B)	-	3000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9.1-Table 28 (Dimensions of Nipples, Hexagon, Equal-L)	-	3000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9.1-Table 28 (Dimensions of Nipples, Hexagon, Equal-T)	-	3000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9.1-Table 28 (Dimensions of Nipples, Hexagon, Equal-A)	-	3000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9.1-Table 28 (Dimensions of Nipples, Hexagon, Equal-C)	-	3000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9.1-Table 28 (Dimensions of Nipples, Hexagon, Equal-B)	-	3000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
11.1(a)(Internal hydraulic Pressure Test)	-	1250	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
11.1(a)(Internal Air Pressure Test)	-	1250	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
11.2.1( Drift Expanding Test)	-	1250	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
11.2.2 (Taper Screw Plug Test)	-	1250	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
14(WORKMANSHIP)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
14(WORKMANSHIP)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
14(WORKMANSHIP)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
13 and as per IS 4736(UNIFORMITY OF ZINC COATING)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
13 and as per IS 4736(MASS OF ZINC COATING)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 13.1.3 (Adhesion Test)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 10(Joints )	-	3000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 9.2.3 (Threads tolerance )	-	3000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 9.2.2 (Tolerance for alignment of threads )	-	3000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 9.1, Table- 27(Normal Size (Internal Threads) (Dimensions of Hexagon Bushes) )	-	3000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 9.1, Table- 27(Normal Size (External Threads) (Dimensions of Hexagon Bushes) )	-	3000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 8.3.3(Parallel threads )	-	3000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.

Complete

21 Aug, 2027

-
-

IS 2016 (1967)

Specification for plain washers (First Revision)

All Grade / Type / Size / Designation

5500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
2.1(Material)	-	2000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
2.2(Workmanship)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
3(Designation)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
4(Dimensions)	-	2000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
5(Finish)	-	1500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
7(Marking)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.

Complete

21 Aug, 2027

-
-

IS 6649 (1985)

Specification for hardened and tempered washers for high strength structural bolts and nuts (First Revision)

All Grade / Type / Size / Designation

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3 Table-1(Dimensions Type A- d1)	-	2000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
3 Table-1(Dimensions Type A- d2)	-	2000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
3 Table-1(Dimensions Type A- S)	-	2000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
3 Table-2(Dimensions Type B&C- d)	-	2000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
3 Table-2(Dimensions Type B&C- a)	-	2000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
3 Table-2(Dimensions Type B&C- t)	-	2000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
3 Table-2(Dimensions Type B&C- θ)	-	2000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
3.1(Deviation)	-	2000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
3.2(Concentric)	-	2000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
3.3(Clearance)	-	2000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5(Chemical Composition- Sulphur)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5(Chemical Composition- Phosphorus)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7(Hardness)	-	3000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8(Finish)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.1(Freedom from defect)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.1(Uniformity of zinc coating)	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.1(Mass of zinc coating)	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.1(Knife test (Adhesion of coating))	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.

Complete

21 Aug, 2027

-
-

IS 9295 (1983)

Specification for steel tubes for idlers for belt conveyors (First Revision)

All Grade / Type / Size / Designation

7500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1(Sulphur- Relevant Parts of IS 228 or any other established instrumental/chemical method)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1(Phosphorous- Relevant Parts of IS 228 or any other established instrumental/chemical method)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
8.1.1 Table 1(Tensile Strength- IS 1608(1))	-	1250	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
8.1.1 Table 1(Yield Strength- IS 1608)	-	1250	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
8.1.1 Table 1(Elongation Percent- IS 1608)	-	1250	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
8.2(Drift Expansion Test- IS 2335)	-	1250	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
8.3(Flattening Test- IS 2328)	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
9.1 Table 2(Outside Diameter)	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
9.1 Table 2(Thickness)	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
9.1 Table 2(Mass)	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
10(Hardness)	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
13.1.1(Ovality)	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
13.1.2(Eccentricity)	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
15.1(Straightness)	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
16.1(Length)	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
17.1(Surface Protection)	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
14.0(Workmanship)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
6.2(Fin height)	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
5.1 Table 1 (ii)(Ends per dm)	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
5.1 Table 1 (iii)(Picks per dm)	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
5.1 Table 1 (iv)(Mass of fabric, g/m2)	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
5.1 Table 1 (v)(Average breaking strength of fabric, Min [Raveled strip method, 200 mm × 50 mm1), N²) (kgf)]: a) Length-wise b) Width-wise)	-	1250	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
5.1 Table 1 (vi)(Minimum breaking strength of bottom seam (Strip method), N²) (kgf), Min)	-	1250	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
5.1 Table 1 (vii)(Elongation at break of fabric (Raveled strip method), percent :)	-	1250	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
6(PRINTING, PACKING AND MARKING)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.

Complete

21 Aug, 2027

-
-

IS 4948 (2020.0)

Welded steel wire fabric for general use - Specification (Second Revision)

All Grade / Type / Size / Designation

5000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 4.1(MATERIALS)	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 4.2(MATERIALS)	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 5.1(MANUFACTURE OF MESH (Assembling of Wires))	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 5.2(MANUFACTURE OF MESH)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 5.3(MANUFACTURE OF MESH)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 5.4(Spacing of Longitudinal and Transverse Wires)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 5.5(Tolerance of Size of Mesh)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 5.6(Tolerance of Size of Sheet or Roll)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 6(TEST FOR WELDING)	-	3000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 9.1(Marking)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 9.1(Marking)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 9.1(Marking)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 9.1(Marking)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 9.1(Marking)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 9.1(Marking)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 9.1(Marking)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 9.3(BIS Certification Marking)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 10.1(Finish)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 4.1(MATERIALS)	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 4.2(MATERIALS)	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 5.1(MANUFACTURE OF MESH (Assembling of Wires))	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 5.2(MANUFACTURE OF MESH)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 5.3(MANUFACTURE OF MESH)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 5.4(Spacing of Longitudinal and Transverse Wires)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 5.5(Tolerance of Size of Mesh)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 5.6(Tolerance of Size of Sheet or Roll)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 6(TEST FOR WELDING)	-	3000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.

Complete

21 Aug, 2027

-
-

IS 937 (1981)

Specification for Washers For Water Fittings For Fire Fighting Purposes

All Grade / Type / Size / Designation

5500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
2.1(Hardness of Rubber before & after Ageing)	-	1250	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
2.1()	-	1250	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
2.1(Elongation at Break before & after Ageing)	-	1250	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
2.1(Acid & Alkali Resistant Test)	-	1250	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
4.1(Size & Dimension)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5.1(Workmanship and Finish)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.1(Marking)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
2.2(Leather - IS 581)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.

Complete

21 Aug, 2027

-
-

IS 6528 (1995)

Stainless steel wire - Specification (First Revision)

All type of Grade / Type / Size / Designation

11000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Table 7(Workmanship)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 6(Workmanship)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 9.1 & Table 3(Diameter & Out Of Round)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 10(UTM)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Table 7(Workmanship)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 6(Workmanship)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 9.1 & Table 3(Diameter & Out Of Round)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Table 7(Workmanship)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 6(Workmanship)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 9.1 & Table 3(Diameter & Out Of Round)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 10(UTM)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1)(Nitrogen)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1)(Titanium)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1)(Vanadium)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1)(Boron)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1)(Copper)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1)(Molybdenum)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1)(Nickel)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1)(Chromium)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1)(Aluminium)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1)(Silicon)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1)(Manganese)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1)(Phosphorous)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1)(Sulphor)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1)(Carbon)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 10(UTM)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 9.1 & Table 3(Diameter & Out Of Round)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 6(Workmanship)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Table 7(Workmanship)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Table 7(Workmanship)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 6(Workmanship)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 9.1 & Table 3(Diameter & Out Of Round)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 10(UTM)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
10.2(Reverse bend test-IS 1716)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
10.3(Torsion test- IS 1717)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
10.4(Wrapping test-IS 1755)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
10.3(Torsion Test(IS 1717-1985))	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
15(Corrosion Resistance - IS:10461)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.

Complete

21 Aug, 2027

-
-

IS 3502 (2009)

Steel chequered plates (Third Revision)

All Grade / Type / Size / Designation

7500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 5(Workmanship)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 6(Workmanship)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 8(UTM)	-	3500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 9(Press)	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 10(Length, Width, Thickness & Chequered Height)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 5(Workmanship)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 6(Workmanship)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 8(UTM)	-	3500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 9(Press)	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 10(Length, Width, Thickness & Chequered Height)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 5(Workmanship)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 6(Workmanship)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 8(UTM)	-	3500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 9(Press)	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 10(Length, Width, Thickness & Chequered Height)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 11(Weight)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 10(Thickness)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 10(Width)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl.8(Elongation)	-	1200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl.8(Yield Stress)	-	1200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
4.1(Grade E 250A of IS 2062.)	-	2500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 10(Length, Width, Thickness & Chequered Height)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 9(Press)	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 8(UTM)	-	3500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 6(Workmanship)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 5(Workmanship)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl.4.1 (IS-2062, E250A)(CARBON)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl.4.1 (IS-2062, E250A)(SULPHUR)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl.4.1 (IS-2062, E250A)(PHOSPHURS)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl.4.1 (IS-2062, E250A)(MANGANESE)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl.4.1 (IS-2062, E250A)(SILICON)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl.4.1 (IS-2062, E250A)(CARBON EQUIVALENT)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl.4.1 (IS-2062, E250A)(NITROGEN)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 5(Workmanship)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 6(Workmanship)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 8(UTM)	-	3500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 9(Press)	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 10(Length, Width, Thickness & Chequered Height)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
4(Carbon as C)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
4(Manganese as Mn)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
4(Sulphur as S)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
4(Phosphorus as P)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
4(Silicon as Si)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
4(Aluminium as Al)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
4(Micro Alloying elements)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
4(Niobium as Nb)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
4(Vanadium as V)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
4(Titanium as Ti)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
4(Nitrogen content)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8(Tensile Strength-IS:1608(P1)-22)	-	1200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8(Yield Stress-IS:1608(P1)-22)	-	1200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8(Elongation on SoA 5.65mm GL)	-	1200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
10(Length - SOP MT-23)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
10(Width - SOP MT-23)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
10(Thickness- SOP MT-23)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
10(Mass -SOP MT-23)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
10(Chequred Height - SOP MT-23)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
10(Chequred Height - SOP MT-23)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 4.1(Carbon- IS 228(Part 1))	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 4.1(Sulphur- IS 228(Part 9))	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 4.1(Phosphorous- IS 228(Part 3))	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 4.1(Manganese- IS 228(Part 2))	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 4.1(Carbon Equivalent (CE))	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 4.1(Silicon- IS 228(Part 2))	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 4.1(Nitrogen -IS 228(Part 19))	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.

Complete

21 Aug, 2027

-
-

IS 4454 : Part 2 (2001)

Steel wire for mechanical springs - Specification february 2001: Part 2 oil hardened and tempered steel wire (Second Revision)

All type of Grade / Type / Size / Designation

16000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 8(Workmanship)	-	100	10% Discount to BIS and for others 1.5 times of the mentioned testing charges.
Cl 9(Diameter & Difference Between Two Reading On Any Two Diameters)	-	100	10% Discount to BIS and for others 1.5 times of the mentioned testing charges.
Cl 10(Tensile Test, Wrap Test, Torsion Test, Bend Test, Coiling and Stretching, Cast of wire, Deep Etch Test, Decarburization Test, Coating and Surface Finish & Eddy Current Test)	-	1000	10% Discount to BIS and for others 1.5 times of the mentioned testing charges.
Cl 8(Workmanship)	-	1000	10% Discount to BIS and for others 1.5 times of the mentioned testing charges.
Cl 9(Diameter & Difference Between Two Reading On Any Two Diameters)	-	1000	10% Discount to BIS and for others 1.5 times of the mentioned testing charges.
Cl 10(Tensile Test, Wrap Test, Torsion Test, Bend Test, Coiling and Stretching, Cast of wire, Deep Etch Test, Decarburization Test, Coating and Surface Finish & Eddy Current Test)	-	1000	10% Discount to BIS and for others 1.5 times of the mentioned testing charges.
Cl 8(Workmanship)	-	1000	10% Discount to BIS and for others 1.5 times of the mentioned testing charges.
Cl 9(Diameter & Difference Between Two Reading On Any Two Diameters)	-	1000	10% Discount to BIS and for others 1.5 times of the mentioned testing charges.
Cl 10(Tensile Test, Wrap Test, Torsion Test, Bend Test, Coiling and Stretching, Cast of wire, Deep Etch Test, Decarburization Test, Coating and Surface Finish & Eddy Current Test)	-	1000	10% Discount to BIS and for others 1.5 times of the mentioned testing charges.
7.1, 7.2(Vanadium)	-	1000	10% Discount to BIS and for others 1.5 times of the mentioned testing charges.
7.1, 7.2(Chromium)	-	1000	10% Discount to BIS and for others 1.5 times of the mentioned testing charges.
7.1, 7.2(copper)	-	1000	10% Discount to BIS and for others 1.5 times of the mentioned testing charges.
7.1, 7.2(phosphorus)	-	1000	10% Discount to BIS and for others 1.5 times of the mentioned testing charges.
7.1, 7.2(sulphur)	-	1000	10% Discount to BIS and for others 1.5 times of the mentioned testing charges.
7.1, 7.2(manganese)	-	1000	10% Discount to BIS and for others 1.5 times of the mentioned testing charges.
7.1, 7.2(silicon )	-	1000	10% Discount to BIS and for others 1.5 times of the mentioned testing charges.
7.1, 7.2(carbon)	-	1000	10% Discount to BIS and for others 1.5 times of the mentioned testing charges.
Cl 10(Tensile Test, Wrap Test, Torsion Test, Bend Test, Coiling and Stretching, Cast of wire, Deep Etch Test, Decarburization Test, Coating and Surface Finish & Eddy Current Test)	-	1000	10% Discount to BIS and for others 1.5 times of the mentioned testing charges.
Cl 9(Diameter & Difference Between Two Reading On Any Two Diameters)	-	1000	10% Discount to BIS and for others 1.5 times of the mentioned testing charges.
Cl 8(Workmanship)	-	1000	10% Discount to BIS and for others 1.5 times of the mentioned testing charges.
Cl 10(Tensile Test, Wrap Test, Torsion Test, Bend Test, Coiling and Stretching, Cast of wire, Deep Etch Test, Decarburization Test, Coating and Surface Finish & Eddy Current Test)	-	1000	10% Discount to BIS and for others 1.5 times of the mentioned testing charges.
Cl 9(Diameter & Difference Between Two Reading On Any Two Diameters)	-	1000	10% Discount to BIS and for others 1.5 times of the mentioned testing charges.
Cl 8(Workmanship)	-	1000	10% Discount to BIS and for others 1.5 times of the mentioned testing charges.
8(Freedom from defects)	-	1000	10% Discount to BIS and for others 1.5 times of the mentioned testing charges.
11(Surface finish)	-	1000	10% Discount to BIS and for others 1.5 times of the mentioned testing charges.
15(Marking)	-	1000	10% Discount to BIS and for others 1.5 times of the mentioned testing charges.

Complete

21 Aug, 2027

-
Exclusion: Eddy Current Test as per Cl.10.8 (Optional test)

IS 208 (2020)

Door Handles - Specification ( Sixth Revision )

All Grade / Type / Size / Designation

5000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
10(PACKING)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9.1(BIS Certification Marking)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9(MARKING)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.2(Tolerance)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.1 Table2A & 2B and Fig 1,2,3,4(DIMENSIONS - Size 1. No. in each Lug 2. No. in a plate when a continious plate is used 3. Size Designation of Counter-sunk Head Wood Screws (as per IS 6760: 1972))	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.1 Table2A & 2B and Fig 1,2,3,4(DIMENSIONS - Size (A,B,C,D,E,F,G,H,I))	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5.1(MANUFACTURE- General)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
3(TYPES-Doors handle shall be of the following types according to the materials used:)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
4.2 -Table 1- viii (Ref. Cl 4.1, Table 1 of IS 742 : 1981)(Chemical composition - Zinc- IS 2600:1964)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
4.2 -Table 1- viii (Ref. Cl 4.1, Table 1 of IS 742 : 1981)(Chemical composition - Impurities-Nickel- IS 2600:1964)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
4.2 -Table 1- viii (Ref. Cl 4.1, Table 1 of IS 742 : 1981)(Chemical composition - Impurities-Thallium and Indium- IS 2600:1964)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
4.2 -Table 1- viii (Ref. Cl 4.1, Table 1 of IS 742 : 1981)(Chemical composition - Impurities-Tin- IS 2600:1964)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
4.2 -Table 1- viii (Ref. Cl 4.1, Table 1 of IS 742 : 1981)(Chemical composition - Impurities-Cadmium- IS 2600:1964)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl.5.1(General)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl.6(Dimension)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl.7(Finish)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl.8.2(Cossosion Test)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl.8.3(Quench Test)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl.9(Sampling and criterion for conformity)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl.10(Marking)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl.11(Packing)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.

Complete

21 Aug, 2027

-
-

IS 204 : Part 1 (1991)

Tower bolts - Specification: Part 1 ferrous metals (Fifth Revision)

All Grade / Type / Size / Designation

3150 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4 -Table 5- i (Ref. Cl 7, Table 3, HR1 grade of IS 1079 : 2017)(Chemical composition - Carbon - IS 228)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
4 -Table 5- i (Ref. Cl 7, Table 3, HR1 grade of IS 1079 : 2017)(Chemical composition - Manganese - IS 228)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
4 -Table 5- i (Ref. Cl 7, Table 3, HR1 grade of IS 1079 : 2017)(Chemical composition - Phosphorus - IS 228)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
4 -Table 5- i (Ref. Cl 7, Table 3, HR1 grade of IS 1079 : 2017)(Chemical composition - Sulphur - IS 228)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
4 -Table 5- ii (Ref. Cl 5, Table 1, E300-C grade of IS 2062 : 2011)(Chemical composition - Carbon - IS 228)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
4 -Table 5- ii (Ref. Cl 5, Table 1, E300-C grade of IS 2062 : 2011)(Chemical composition - Manganese - IS 228)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
4 -Table 5- ii (Ref. Cl 5, Table 1, E300-C grade of IS 2062 : 2011)(Chemical composition - Sulphur - IS 228)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
4 -Table 5- ii (Ref. Cl 5, Table 1, E300-C grade of IS 2062 : 2011)(Chemical composition - Phosphorus - IS 228)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
4 -Table 5- ii (Ref. Cl 5, Table 1, E300-C grade of IS 2062 : 2011)(Chemical composition - Silicon - IS 228)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
4 -Table 5- ii (Ref. Cl 5, Table 1, E300-C grade of IS 2062 : 2011)(Chemical composition - Carbon Equivalen(CE) - IS 228)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
4 -Table 5- iii (Ref. Cl 6.1 of IS 210 : 2009)(Chemical composition - Sulphur and/or Phosphorous)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
4 -Table 5- iii (Ref. Cl 9.1 of IS 210 : 2009)(The microstructure shall be substantially free of primary cementite and/ or massive stead ite and shall consist oftlake graphite in a matrix offerrite or pearlite or mixture thereof.)	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
4 -Table 5- iii (Ref. Cl 9.1.1 of IS 210 : 2009)(Graphite structute Distribution - IS 7754)	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
5.1(General)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
5.2.1 Table 1(Particulars-Barrel Tower Bolts)	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
5.2.2 Table 2(Particulars-Sami Barrel Tower Bolts)	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
5.2.3 Table 3(Particulars-Riveted or Spot Welded Tower Bolts)	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
5.2.4 Table 4(Particulars-Skeleton Tower Bolts)	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
6.1- Table 1(Dimension of Barrel tower bolts-1.Size 2.Length of Bolt-A 3.Length of Barrel-B 4.Width of Barrel-C 5.Dia of Bolt-D 6.Length of Socket-E 7.Thickness of mild steel sheet for barrel-F 8.Dia of bore of barrel or socket- G )	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
6.1- Table 1(Dimension of Barrel tower bolts-Minimum No. of equally Spaced Screw holes in Barrel and Socket for wood screw no 6)	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
6.2- Table 2(Dimension of Sami Barrel Tower Bolts 1.Size 2.Length of Bolt-A 3.Length of Bolt Plate-B 4.Width of Bolt Plate-C 5.Dia of Bolt-D 6.Length of Socket-E 7.Thickness of Bolt Plate or Socket-F 8.Dia of bore of Bolt Plate or socket G )	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
6.2- Table 2(Dimension of Sami Barrel Tower Bolts-Minimum No. of equally Spaced Screw holes in Bolt Plate and Socket for wood screw no 6)	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
6.3- Table 3(Dimension of Riveted or Spot Welded Tower Bolts- 1.Size 2.Length of Bolt-A 3.Length of Bolt Plate-B 4.Width of Bolt Plate-C 5.Dia of Bolt-D 6.Length of Socket-E 7. Length of Strap-E" 8.Thickness of Back Plate -F 9.Thickness of Socket or Upper Plate and Strap- F" 10.Dia of bore of Bolt Plate or socket- G 11. Length of Alternative Socket-H )	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
6.3- Table 3(Dimension of Riveted or Spot Welded Tower Bolts-Minimum No. of equally Spaced Screw holes in Bolt Plate and Socket for wood screw no 6)	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
6.4- Table 4(Dimension of Skeleton Tower Bolts 1.Size 2.Length of Bolt-A 3.Length of Bolt Plate-B 4.Width of Bolt Plate-C 5.Dia of Bolt-D 6.Length of Staple-E 7.Thickness of Plate or Staple -F 8.Dia of bore of Plate or Staple-G 9.Dia of shank of Knob-J)	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
6.4- Table 4(Dimension of Skeleton Tower Bolts- Nos of Staples)	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
6.4- Table 4(Dimension of Skeleton Tower Bolts-Minimum No. of Screw holes for wood screw no 6)	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
8.1(MARKING- .)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
8.1.1,(MARKING- )	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
9(PACKING)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
7(Finish)	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.

Complete

21 Aug, 2027

-
-

IS 1239 : Part 1 (2004)

Steel tubes, tubulars and other wrought steel fittings - Specification: Part 1 steel tubes (Sixth Revision)

All Grade / Type / Size / Designation

8400 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 8(Outer Diameter, Thickness & Mass)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 10.1(Manufacturing )	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 10.1.1(Manufacturing )	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 12(Workmanship)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 14(Tensile Test, Flattening Test & Bend Test)	-	2500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 15(Workmanship)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 8(Outer Diameter, Thickness & Mass)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 10.1(Manufacturing )	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 10.1.1(Manufacturing )	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 12(Workmanship)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 14(Tensile Test, Flattening Test & Bend Test)	-	2500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 15(Workmanship)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 8(Outer Diameter, Thickness & Mass)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 10.1(Manufacturing )	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 10.1.1(Manufacturing )	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 12(Workmanship)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 14(Tensile Test, Flattening Test & Bend Test)	-	2500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 15(Workmanship)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7, 6.1.1(CARBON)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7, 6.1.1(SULPHUR)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7, 6.1.1(PHOSPHURS)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7, 6.1.1(MANGANESE)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7, 6.1.1(NITROGEN)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7, 6.1.1(SILICON)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7, 6.1.1(ALUMINIUM)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 8(Outer Diameter, Thickness & Mass)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 10.1(Manufacturing)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 10.1.1(Manufacturing)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 12(Workmanship)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 14(Tensile Test, Flattening Test & Bend Test)	-	2500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 15(Workmanship)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 8.1 (Table3,4,5)(Nominal Bore)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 11.1(Random Length)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 11.2(Exact Length)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 11.3(Approximate Length)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 14.1.1(Elongation Percent)	-	2500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 8 Table 3,4 & 5(Outside Diameter)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 8, 9 Table 3,4 & 5(Thickness)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 6.5(Height of Internal Fin)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 8, 9 Table 3,4 & 5(Mass of Tube)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 11(Length)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 3.3, 10.2(Plain End)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 14.1(Tensile Strength)	-	2500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 14.1.1(Elongation)	-	2500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 14.2(Bend Test (uto and including 50 mm NB))	-	2500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 14.3(Flattening test (Over 50 mm NB))	-	2500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 15(Workmanship)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 6.1.1, table1 of IS 1239(Part1)(Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 6.1.1, table1 of IS 1239(Part1)(Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 6.1.1, table1 of IS 1239(Part1)(Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 6.1.1, table1 of IS 1239(Part1)(Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.1.1(CARBON)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.1.1(SULPHUR)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.1.1(PHOSPHORUS)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.1.1(MANGANESE)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.2 AND AS PER IS 10748(CARBON)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.2 AND AS PER IS 10748(SULPHUR)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.2 AND AS PER IS 10748(PHOSPHORUS)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.2 AND AS PER IS 10748(MANGANESE)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.2 AND AS PER IS 10748(CARBON EQUIVALENT)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.2 AND AS PER IS 10748(SILICON)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.2 AND AS PER IS 10748(ALUMINIUM)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.2 AND AS PER IS 10748(MICRO ALLOY)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
STEEI-I TUBES, TUBULARS AND OTHER WROUGHT STEEL FITTINGS(NITROGEN)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.2 AND AS PER IS 10748(COPPER)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.2 AND AS PER IS 513(CARBON)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.2 AND AS PER IS 513(SULPHUR)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.2 AND AS PER IS 513(PHOSPHORUS)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.2 AND AS PER IS 513(MANGANESE)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.2 AND AS PER IS 513(SILICON)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.2 AND AS PER IS 513(ALUMINIUM)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.2 AND AS PER IS 513(MICRO ALLOY)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.2 AND AS PER IS 513(NITROGEN)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
12 AND AS PER IS 4736(MASS OF ZINC COATING)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
12 AND AS PER IS 4736(UNIFORMITY OF ZINC COATING)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause - 6.1.1, Table-1(CARBON)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause - 6.1.1, Table-1(SULPHUR)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause - 6.1.1, Table-1(PHOSPHURS)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause - 6.1.1, Table-1(MANGANESE)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause - 6.1.1, Table-1(NITROGEN)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause - 6.1.1, Table-1(SILICON)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause - 6.1.1, Table-1(ALUMINIUM)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.2 AND AS PER IS 10748(CARBON)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.2 AND AS PER IS 10748(SULPHUR)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.2 AND AS PER IS 10748(PHOSPHORUS)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.2 AND AS PER IS 10748(MANGANESE)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.2 AND AS PER IS 10748(CARBON EQUIVALENT)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.2 AND AS PER IS 10748(SILICON)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.2 AND AS PER IS 10748(ALUMINIUM)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.2 AND AS PER IS 10748(MICRO ALLOY)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.2 AND AS PER IS 10748(NITROGEN)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.2 AND AS PER IS 10748(COPPER)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.2 AND AS PER IS 513(CARBON)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.2 AND AS PER IS 513(SULPHUR)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.2 AND AS PER IS 513(PHOSPHORUS)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.2 AND AS PER IS 513(MANGANESE)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.2 AND AS PER IS 513(SILICON)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.2 AND AS PER IS 513(ALUMINIUM)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.2 AND AS PER IS 513(ALUMINIUM)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.2 AND AS PER IS 513(MICRO ALLOY)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.2 AND AS PER IS 513(NITROGEN)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
12 AND AS PER IS 4736(UNIFORMITY OF ZINC COATING)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.0 (b)(Thickness- SOP MT-23)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.0 (c)(Mass of Tube- SOP MT-23)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
12.1(Galvanizing)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
12.2(Galvanizing)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
17.0 & 17.1(Marking -IS:1239 (P1))	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
17.0 & 17.2(Colour Band - IS:1239 (P1))	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
17.0 & 17.4(Length of colour band - IS:1239 (P1))	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
10.1(Thared Joints(IS:554))	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
10.2(Plain end)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
13.0(Leak Proof Test)	-	5000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
11(Length & tolerance)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
14.2 & 14.3(Bend/Flattening test)	-	2500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
15(Workmanship)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.

Complete

21 Aug, 2027

-
-

IS 4454 : Part 1 (2001)

Steel wire for mechanical springs - Specification: Part 1 cold drawn unalloyed steel wire (Third Revision)

All type of Grade/Type/Size/Designation

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 8(Workmanship)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 9(Diameter & Difference Between Two Reading On Any Two Diameters)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 10(Tensile Test, Wrap Test, Torsion Test, Bend Test, Coiling and Stretching, Cast of wire, Deep Etch Test & Decarburization Test)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 8(Workmanship)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 9(Diameter & Difference Between Two Reading On Any Two Diameters)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 10(Tensile Test, Wrap Test, Torsion Test, Bend Test, Coiling and Stretching, Cast of wire, Deep Etch Test & Decarburization Test)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1, 7.2(copper)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1, 7.2(Vanadium)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1, 7.2(phosphorus)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1, 7.2(sulphur)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1, 7.2(manganese)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1, 7.2(silicon )	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1, 7.2(carbon)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1, 7.2(copper)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1, 7.2(Chromium)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1, 7.2(phosphorus)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1, 7.2(sulphur)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1, 7.2(manganese)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1, 7.2(silicon )	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1, 7.2(carbon)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1, 7.2(copper)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1, 7.2(Chromium)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1, 7.2(phosphorus)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1, 7.2(sulphur)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1, 7.2(manganese)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1, 7.2(silicon )	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1, 7.2(carbon)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1, 7.2(copper)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1, 7.2(Vanadium)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1, 7.2(Chromium)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1, 7.2(phosphorus)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1, 7.2(sulphur)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1, 7.2(manganese)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1, 7.2(silicon )	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1, 7.2(carbon)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1, 7.2(copper)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1, 7.2(Vanadium)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1, 7.2(Chromium)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1, 7.2(phosphorus)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1, 7.2(sulphur)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1, 7.2(manganese)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1, 7.2(silicon )	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1, 7.2(carbon)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1, 7.2(copper)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1, 7.2(Vanadium)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1, 7.2(Chromium)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1, 7.2(phosphorus)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1, 7.2(sulphur)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1, 7.2(manganese)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1, 7.2(silicon )	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1, 7.2(carbon)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1, 7.2(copper)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1, 7.2(Vanadium)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1, 7.2(Chromium)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1, 7.2(phosphorus)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1, 7.2(sulphur)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1, 7.2(manganese)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1, 7.2(silicon )	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1, 7.2(carbon)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1, 7.2(copper)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1, 7.2(Vanadium)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1, 7.2(Chromium)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1, 7.2(phosphorus)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1, 7.2(sulphur)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1, 7.2(manganese)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1, 7.2(silicon )	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1, 7.2(carbon)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1, 7.2(copper)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1, 7.2(Vanadium)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1, 7.2(Chromium)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1, 7.2(phosphorus)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1, 7.2(sulphur)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1, 7.2(manganese)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1, 7.2(silicon )	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1, 7.2(carbon)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1, 7.2(copper)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1, 7.2(phosphorus)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1, 7.2(sulphur)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1, 7.2(manganese)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1, 7.2(silicon )	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1, 7.2(carbon)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1, 7.2(copper)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1, 7.2(phosphorus)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1, 7.2(sulphur)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1, 7.2(manganese)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1, 7.2(silicon )	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1, 7.2(carbon)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1, 7.2(copper)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1, 7.2(phosphorus)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1, 7.2(sulphur)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1, 7.2(manganese)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1, 7.2(silicon )	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1, 7.2(carbon)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1, 7.2(nitrogen)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1, 7.2(micro alloy)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1, 7.2(cu + cr+ni)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1, 7.2(sulphur + phosphorus)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1, 7.2(copper)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1, 7.2(phosphorus)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1, 7.2(sulphur)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1, 7.2(manganese)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1, 7.2(silicon )	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1, 7.2(carbon)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1, 7.2(cu + cr + ni)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1, 7.2(sulphur + phosphorus)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1, 7.2(copper)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1, 7.2(phosphorus)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1, 7.2(sulphur)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1, 7.2(manganese)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1, 7.2(silicon )	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1, 7.2(carbon)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 10(Tensile Test, Wrap Test, Torsion Test, Bend Test, Coiling and Stretching, Cast of wire, Deep Etch Test & Decarburization Test)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 9(Diameter & Difference Between Two Reading On Any Two Diameters)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 8(Workmanship)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 10(Tensile Test, Wrap Test, Torsion Test, Bend Test, Coiling and Stretching, Cast of wire, Deep Etch Test & Decarburization Test)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 9(Diameter & Difference Between Two Reading On Any Two Diameters)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 8(Workmanship)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
11(Coating and surface finish)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
11(Coating & Surface finish)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
15(Marking)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8(Freedom from defects)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
11(Surface finish)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
15(Marking)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
11(Coating & Surface finish)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
15(Marking)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 10(Tensile Test, Wrap Test, Torsion Test, Bend Test, Coiling and Stretching, Cast of wire, Deep Etch Test & Decarburization Test)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 8(Workmanship)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 9(Diameter & Difference Between Two Reading On Any Two Diameters)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.

Complete

21 Aug, 2027

-
-

IS 1566 (1982)

Specification for hard - Drawn steel wire fabric for concrete reinforcement (Second Revision)

All Grade / Type / Size / Designation

8500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Sulphur-Relevant Parts of IS 228)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
4.1(Phosphorous-Relevant Parts of IS 228)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
4.1(Nitrogen-Relevant Parts of IS 228)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6(DIMENSIONS)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7(SIZES OF SHEETS ‘OR ROLLS)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8(MASS)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9.2(Tolerance on Size of Mesh)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9.3(Tolerance on Size of Sheet)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9.4(Tolerance on Mass of Fabric)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
10(MECHANICAL PROPERTIES)	-	3500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
11.2(Tensile Test)	-	3500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
11.3(Reverse Bend Test)	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.

Complete

21 Aug, 2027

-
-

IS 281 (2009)

Mild steel sliding door bolts for use with padlocks - Specification (Fourth Revision)

All Grade / Type / Size / Designation

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 8.1 (Ref. Cl.9 of IS 1868:1996)(Thickness Test for Copper Plating of Oxidized Finished Material, Cl. 4 of IS 1378 : 1987 & Cl 3 of IS 3203)	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 8.2 (Ref. Cl.9 of IS 1868:1996)(Thickness Test for Copper Plating of Oxidized Finished Material, Cl. 4 of IS 1378 : 1987 & Cl 3 of IS 3203)	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
3(TYPES)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
4(SIZES)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6(DIMENSIONS AND TOLERANCES-A)	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6-Table 1(DIMENSIONS AND TOLERANCES-A)	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6-Table 1(DIMENSIONS AND TOLERANCES-B)	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6-Table 1(DIMENSIONS AND TOLERANCES-C)	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6-Table 1(DIMENSIONS AND TOLERANCES-D)	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6-Table 1(DIMENSIONS AND TOLERANCES-E)	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6-Table 1(DIMENSIONS AND TOLERANCES-F)	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6-Table 1(DIMENSIONS AND TOLERANCES-G)	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6-Table 1(DIMENSIONS AND TOLERANCES-H)	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6-Table 1(DIMENSIONS AND TOLERANCES-J)	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6-Table 1(DIMENSIONS AND TOLERANCES-T)	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6-Table 1(DIMENSIONS AND TOLERANCES-DIMENSIONS AND TOLERANCES-No. of Screw on Staple or Clip to accommodate Wood Screw N0 (IS 451))	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6-Table 1(DIMENSIONS AND TOLERANCES-No. of Rivets on bolts plates)	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6-Table 1(DIMENSIONS AND TOLERANCES-No. of Rivets on Socket)	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6-Table 1(DIMENSIONS AND TOLERANCES-No. of Screw holes on bolt)	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6-Table 1(DIMENSIONS AND TOLERANCES-No. of Screw holes on Socket)	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6-Table 1(DIMENSIONS AND TOLERANCES-No. of Screw holes on Staple)	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6-Table 1(DIMENSIONS AND TOLERANCES-no. of 8m Sqire Holes for carriage bolts for plate and sockets)	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6-Table 1(DIMENSIONS AND TOLERANCES-no. of 8m Sqire Holes for carriage bolts for Staple)	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1(MANUFACTURE-General)	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1(MANUFACTURE-General)	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1(MANUFACTURE-General)	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.2(MANUFACTURE-Sliding Door Bolts, Plate Type)	-	3500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.2(MANUFACTURE-Sliding Door Bolts, Plate Type)	-	3500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.2(MANUFACTURE-Sliding Door Bolts, Plate Type)	-	3500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.2(MANUFACTURE-Sliding Door Bolts, Plate Type)	-	3500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.2(MANUFACTURE-Sliding Door Bolts, Plate Type)	-	3500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.2(MANUFACTURE-Sliding Door Bolts, Plate Type)	-	3500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.2(MANUFACTURE-Sliding Door Bolts, Plate Type)	-	3500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.3(MANUFACTURE-Sliding Bolts, Clip or Bolt Type)	-	3500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.3(MANUFACTURE-Sliding Bolts, Clip or Bolt Type)	-	3500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.3(MANUFACTURE-Sliding Bolts, Clip or Bolt Type)	-	3500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.3(MANUFACTURE-Sliding Bolts, Clip or Bolt Type)	-	3500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.3(MANUFACTURE-Sliding Bolts, Clip or Bolt Type)	-	3500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.1(FINISH-Sliding Bolts, Plate Type)	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.

Complete

21 Aug, 2027

-
-

IS 1364 : Part 2 (2023)

Hexagon head bolts screws and nuts of product grades A and B Part 2 Hexagon head screws (Size range M1.6 to M64 ) (Sixth revision of IS 1364 (Part 2))

All Grade / Type / Size / Designation

18000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4(Dimensions)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-5, Table-5(General requirements)	-	2500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-5, Table-5(Thread-Tolerance class)	-	2500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-5, Table-5(Mechanical properties-Steel)	-	8000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-5, Table-5(Mechanical properties-Stainless steel)	-	8000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-5, Table-5(Tolerances- Product grade)	-	8000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-5, Table-5(Surface condition -Electroplated coatings)	-	3500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-5, Table-5(Surface condition- Non-electrolytically applied zinc flake)	-	3500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-5, Table-5(Surface condition - Hot dip galvanized coatings)	-	3500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-5, Table-5("Surface integrity -Limits for surface discontinuities")	-	2500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-6(Marking)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.

Complete

21 Aug, 2027

-
-

IS 1364 : Part 1 (2023)

Hexagon head bolts, screws, and nuts of property grades A and B: Part 1 Hexagon head bolts (Size range M1.6 to M64) (sixth revision)

All Grade / Type / Size / Designation

18000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4(Dimensions)	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-5, Table-7(General requirements)	-	2500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-5, Table-7(Thread-Tolerance class)	-	2500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-5, Table-7(Mechanical properties- Steel)	-	8000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-5, Table-7(Mechanical properties-Stainless steel)	-	8000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-5, Table-7(Tolerances-Product grade)	-	8000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-5, Table-7(Surface condition -Electroplated coatings)	-	3500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-5, Table-7(Surface condition- Non-electrolytically applied zinc flake)	-	3500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-5, Table-7(Surface condition - Hot dip galvanized coatings)	-	3500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-5, Table-7(Surface integrity- Limits for surface discontinuities)	-	2500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-6(Marking)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.

Complete

21 Aug, 2027

-
-

IS 1363 : Part 3 (2018)

Hexagon Head Bolts, Screws and Nuts of Product Grade ˜C ™ Part 3 (Style 1) Hexagon Nuts ( Size Range M 5 to M 64 ) ( Fifth Revision )

All Grade / Type / Size / Designation

18000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3-Table 1(Dimensions-D)	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
3-Table 1(Dimensions-P)	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
3-Table 1(Dimensions-dw(minimum))	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
3-Table 1(Dimensions-e(minimum))	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
3-Table 1(Dimensions-m(minimum))	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
3-Table 1(Dimensions-m(maximum))	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
3-Table 1(Dimensions-mw(minimum))	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
3-Table 1(Dimensions-s(minimum))	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
3-Table 1(Dimensions-s(maximum))	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
3-Table 2(Dimensions-D)	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
3-Table 2(Dimensions-P)	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
3-Table 2(Dimensions-dw(minimum))	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
3-Table 2(Dimensions-e(minimum))	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
3-Table 2(Dimensions-m(minimum))	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
3-Table 2(Dimensions-m(maximum))	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
3-Table 2(Dimensions-mw(minimum))	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
3-Table 2(Dimensions-s(minimum))	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
3-Table 2(Dimensions-s(maximum))	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
4-Table 3(General requirements)	-	2500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
4-Table 3(Threads-ISO 724 & 965(1))	-	2500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
4-Table 3(Mechanical property-Property class (ISO 898-1))	-	12000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
4-Table 3(Mechanical property-Tensile strength (ISO 898-1))	-	3000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
4-Table 3(Mechanical property-Lower yield strength (ISO 898-1) )	-	3000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
4-Table 3(Mechanical property-Stress at 0,2 % non-proportional elongation (ISO 898-1))	-	3000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
4-Table 3(Mechanical property-Stress at 0,0048d non-proportional elongation for full-size fasteners (ISO 898-1))	-	3000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
4-Table 3(Mechanical property-Stress under proof load (ISO 898-1))	-	3000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
4-Table 3(Mechanical property-Proof strength ratio (ISO 898-1))	-	3000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
4-Table 3(Mechanical property-Percentage elongation after fracture for machined test pieces (ISO 898-1))	-	3000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
4-Table 3(Mechanical property-Percentage reduction of area after fracture for machined test pieces (ISO 898-1))	-	3000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
4-Table 3(Mechanical property-Elongation after fracture for full-size fasteners (ISO 898-1))	-	3000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
4-Table 3(Mechanical property-Head soundness (ISO 898-1))	-	3000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
4-Table 3(Mechanical property-Vickers hardness (ISO 898-1))	-	3000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
4-Table 3(Mechanical property-Brinell hardness (ISO 898-1))	-	3000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
4-Table 3(Mechanical property-Rockwell hardness (ISO 898-1) HRB)	-	3000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
4-Table 3(Mechanical property-Rockwell hardness (ISO 898-1) HRC)	-	3000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
4-Table 3(Mechanical property-Surface hardness (ISO 898-1))	-	3000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
4-Table 3(Mechanical property-Non-carburization (ISO 898-1))	-	3000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
4-Table 3(Mechanical property-Height of non-decarburized thread zone (ISO 898-1))	-	3000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
4-Table 3(Mechanical property-Depth of complete decarburization in the thread (ISO 898-1))	-	3000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
4-Table 3(Mechanical property-Reduction of hardness after retempering (ISO 898-1))	-	3000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
4-Table 3(Mechanical property-Breaking torque (ISO 898-1))	-	3000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
4-Table 3(Mechanical property-Impact strength (ISO 898-1))	-	3000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Quench Cracks(ISO 6157-1))	-	3000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Forging cracks (ISO 6157-1))	-	3000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Forging bursts (ISO 6157-1)- Chamfer Circle)	-	3000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Forging bursts (ISO 6157-1))	-	3000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Forging bursts-Hexagon head screw (ISO 6157-1))	-	3000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Forging bursts-Circular head screws (ISO 6157-1))	-	3000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Forging Bursts-Circular head screws (ISO 6157-1))	-	3000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Shear bursts (ISO 6157-1) (Chamfer Circle))	-	3000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Shear bursts (ISO 6157-1))	-	3000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Shear bursts-Hexagon head screw (ISO 6157-1))	-	3000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Shear Bursts-Circular head screws (ISO 6157-1))	-	3000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Shear bursts-Circular head screws (ISO 6157-1))	-	3000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Raw material seams and laps (ISO 6157-1))	-	3000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Voids (ISO 6157-1))	-	3000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Folds (ISO 6157-1))	-	3000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Tool marks (ISO 6157-1))	-	3000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Damages (ISO 6157-1) (Impairs Usability))	-	3000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Damages (ISO 6157-1))	-	3000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)-- Quench cracks (ISO 6157-3))	-	3000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)-Forging cracks - (ISO 6157-3))	-	3000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Forging bursts (ISO 6157-3) Chamfer Circle)	-	3000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Forging bursts (ISO 6157-3))	-	3000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Forging bursts-Hexagon head screw (ISO 6157-3))	-	3000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Forging bursts-Circular head screws (ISO 6157-3))	-	3000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Forging bursts-Circular head screws (ISO 6157-3))	-	3000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Shear bursts-Hexagon head screws-Width (ISO 6157-3))	-	3000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Shear bursts-Hexagon head screws-Depth (ISO 6157-3))	-	3000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Shear bursts-Hexagon head screws (ISO 6157-3))	-	3000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Shear bursts-Hexagon head screws (ISO 6157-3))	-	3000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Shear bursts-Hexagon head screws (ISO 6157-3))	-	3000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)-Circular head screws - (ISO 6157-3))	-	3000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)-Circular head screws - (ISO 6157-3))	-	3000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)-Forging cracks in socket head screws- (ISO 6157-3))	-	3000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)-Forging cracks in socket head screws- (ISO 6157-3))	-	3000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)-Forging cracks in socket head screws- (ISO 6157-3))	-	3000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)-Forging cracks in socket head screws- (ISO 6157-3))	-	3000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)-Forging cracks in socket head screws- (ISO 6157-3))	-	3000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)-Forging cracks in socket head screws- (ISO 6157-3))	-	3000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)-Forging cracks in socket head screws- (ISO 6157-3))	-	3000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)-Raw material, seams and laps- (ISO 6157-3))	-	3000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)-Voids- (ISO 6157-3))	-	3000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)-Folds- (ISO 6157-3))	-	3000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)-Tool marks - (ISO 6157-3))	-	3000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)-Laps on the thread - (ISO 6157-3))	-	3000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)-Laps on the thread - (ISO 6157-3))	-	3000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)-Damages - (ISO 6157-3))	-	3000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.

Complete

21 Aug, 2027

-
-

IS 1363 : Part 2 (2023)

Hexagon head bolts, screws and nuts of product grade C Part 2 Hexagon head screws (Size range M5 to M64) (sixth revision)

All Grade / Type / Size / Designation

18000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Dimensions)	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
5- Table 4 -(i)(General requirements)	-	2500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
5- Table 4 -(ii)(Thread)	-	2500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
5- Table 4 -(iii)(Mechanical properties)	-	8000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
5- Table 4 -(iv)(Tolerances)	-	8000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
5- Table 4 -(v)(Surface condition)	-	3500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
5- Table 4 -(vi)(Surface integrity)	-	2500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
5- Table 4 -(vii)(Acceptability)	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
6(Marking and labelling)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
7(Designation)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.

Complete

21 Aug, 2027

-
-

IS 1363 : Part 1 (2023)

Hexagon head bolts, screws and nuts of product grade C Part 1 Hexagon head bolts (Size range M5 to M64) (sixth revision)

All Grade / Type / Size / Designation

18000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Dimensions)	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
5 - Table 5 (i)(General requirements)	-	2500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
5 - Table 5 (ii)(Thread)	-	2500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
5 - Table 5 (iii)(Mechanical properties)	-	8000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
5 - Table 5 (iv)(Tolerances)	-	8000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
5 - Table 5 (v)(Surface condition)	-	3500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
5 - Table 5 (vi)(Surface integrity)	-	2500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
5 - Table 5 (vii)(Acceptability)	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
6(Marking and labelling)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
7(Designation)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.

Complete

21 Aug, 2027

-
-

IS 6623 (2004)

High Strength Structural Nuts

All Grade / Type / Size / Designation

18000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1 Table-1(Dimensions- d)	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
4.1 Table-1(Dimensions- p)	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
4.1 Table-1(Dimensions- da)	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
4.1 Table-1(Dimensions- dw)	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
4.1 Table-1(Dimensions- e)	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
4.1 Table-1(Dimensions- m)	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
4.1 Table-1(Dimensions- m')	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
4.1 Table-1(Dimensions- m'')	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
4.1 Table-1(Dimensions- c)	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
4.1 Table-1(Dimensions- s)	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
4.2(Conformity of threads)	-	2000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
5.1 Table-2(Rockwell Hardness)	-	2500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
5.1 Table-2(Proof Load Tcst)	-	5000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
6.1( heat-treat)	-	2500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
6.2(Finish)	-	2500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
6.2.1(Finish)	-	2500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1(Surface discountinuties test)	-	2500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
7.2(Workmanship)	-	2500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
4.1 Table-1(Dimensions- d)	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
4.1 Table-1(Dimensions- p)	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
4.1 Table-1(Dimensions- da)	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
4.1 Table-1(Dimensions- dw)	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
4.1 Table-1(Dimensions- e)	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
4.1 Table-1(Dimensions- m)	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
4.1 Table-1(Dimensions- m')	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
4.1 Table-1(Dimensions- m'')	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
4.1 Table-1(Dimensions- c)	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
4.1 Table-1(Dimensions- s)	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
4.2(Conformity of threads)	-	2000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
5.1 Table-2(Rockwell Hardness)	-	2500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
5.1 Table-2(Proof Load Tcst)	-	5000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
6.1( heat-treat)	-	2500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
6.2(Finish)	-	2500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
6.2.1(Finish)	-	2500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1(Surface discountinuties test)	-	2500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
7.2(Workmanship)	-	2500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.

Complete

21 Aug, 2027

-
-

IS 4151 (2015)

Protective helmets for motorcycle riders - Specification

All Grade / Type / Size / Designation

55000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Shell)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
4.5(Metal Parts)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
4.6(Visor)	-	15000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.1(General)	-	2000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.2(Shell)	-	2000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.3(Protactive Padding)	-	2000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.4(Retention System)	-	2000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.7(Peripheral Vision)	-	2000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.8(Workmanship and Finish)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.0(Tests for Helmets)	-	3000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.2(Impact Absorption Test)	-	3000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.3(Rigidity Test)	-	3000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.4(Projections and Surface Friction Test)	-	3000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.5(Dynamic Test of Retention System)	-	3000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.6(Audibility Test)	-	3000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.7(Retention Test of Helmet)	-	3000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.8(Micro-Slip Test of the Chin Strap)	-	3000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.9(Test for Resistance to Abrasion of the Chin Strap )	-	3000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.10.1(Inadvertent Release by Pressure)	-	3000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.10.2(Ease of Release)	-	3000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.10.3(Durability of Quick Release Mechanism)	-	3000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.10.3(Tests for Helmets)	-	3000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.10.2(Tests for Helmets)	-	3000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.10.1(Tests for Helmets)	-	3000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.9(Tests for Helmets)	-	3000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.8(Tests for Helmets)	-	3000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.7(Tests for Helmets)	-	3000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.6(Tests for Helmets)	-	3000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.5(Tests for Helmets)	-	3000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.4(Tests for Helmets)	-	3000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.3(Tests for Helmets)	-	3000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.2(Tests for Helmets)	-	3000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7(Tests for Helmets)	-	3000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.8(Workmanship and Finish)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.7(Constructional Requirements)	-	2000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.4(Constructional Requirements)	-	2000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.3(Constructional Requirements)	-	2000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.2(Constructional Requirements)	-	2000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.1(Constructional Requirements)	-	2000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5(Size)	-	2000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
4.6(Material)	-	15000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
4.5(Material)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
4.1(Material)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.

Complete

21 Aug, 2027

-
-

IS 9973 (1981)

Specification for visor for scooter helmets

All Grade / Type / Size / Designation

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(Impact resistance)	-	2000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
5.2(Penetration resistance)	-	2000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
5.3(Flammability)	-	2000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
5.4.1(Distortion)	-	2000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
5.4.2(Spherical&Cylindral error)	-	2000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
5.4.3(Prismatic Error)	-	2000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
5.4.4(Diffuse transmittance)	-	2000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
5.4.5(Light transmission)	-	2000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
5.5(Field of Vision)	-	2000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
7.0(Mass)	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
5.1(Impact resistance)	-	2000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
5.2(Penetration resistance)	-	2000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
5.3(Flammability)	-	2000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
5.4.1(Distortion)	-	2000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
5.4.2(Spherical&Cylindral error)	-	2000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
5.4.3(Prismatic Error)	-	2000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
5.4.4(Diffuse transmittance)	-	2000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
5.4.5(Light transmission)	-	2000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
5.5(Field of Vision)	-	2000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1(Mass)	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
3(Materials)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
4(Design)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
6.1(Workmanship and Finish)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
5.2.2(Cradle)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.

Complete

21 Aug, 2027

-
-

IS 3601 (2006)

Steel tubes for mechanical and general engineering purposes - Specification (Second Revision)

All type of Grade/Type/Size/Designation

9500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Material)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
13(Mechanical Testing)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.0(Workmanship)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
4.1(Sulphur-Percentage by mass)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
4.1(Phosphorus-Percentage by mass)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.0(Straightness)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
19.1.1, 24.1.1, 28.1.1, 33.1.1(Dimensions- Outside Dia)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
19.1.2, 24.1.2, 28.1.2, 33.1.2(Dimensions- Thickness)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
11.1(Surface Protection)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
11.2(Surface Protection)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
13.1.3(Tensile Strength)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
13.1.1(Yield Stress)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
13.1.2(Elongation)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
13.2(Flattening Test)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
13.3(Bend Test (Strip))	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
13.4(Bend Test (Whole Tube))	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
13.5(Drift Expansion Test)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
19.1.3(Height of Internal Fin)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.0(Workmanship)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
4.1(Sulphur-Percentage by mass)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
4.1(Phosphorus-Percentage by mass)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.0(Straightness)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
19.1.1, 24.1.1, 28.1.1, 33.1.1(Dimensions- Outside Dia)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
19.1.2, 24.1.2, 28.1.2, 33.1.2(Dimensions- Thickness)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
11.1(Surface Protection)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
11.2(Surface Protection)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
13.1.3(Tensile Strength)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
13.1.1(Yield Stress)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
13.1.2(Elongation)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
13.2(Flattening Test)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
13.3(Bend Test (Strip))	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
13.4(Bend Test (Whole Tube))	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
13.5(Drift Expansion Test)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
13.6(Crush Test)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
19.1.3(Height of Internal Fin)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 10 Annex B Cl. 17, Cl. 19(Moment of inertia)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 10 Annex B Cl. 17, Cl. 19(Radius of gyration)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 10 Annex B Cl. 17, Cl. 19(Modulus of section)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 10 Annex B Cl. 17, Cl. 19(Area of cross section)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 19.1.3(Internal Fin Height)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 10 Annex B Cl. 17, Cl. 19(Mass)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 9(Length)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
4.0 (a)(Carbon as C - IS:8811)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
4.0 (b)(Manganese as Mn - IS:8811)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
4.0 (b)(Manganese as Mn - IS:8811)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
4.0 (c)(Micro Alloying elements (Nb+V+Ti))	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
4.0 (f)(Nitrogen content)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9(Length -SOP MT-23)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
10(Outside diameter-SOP MT-23)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
10(Thickness - SOP MT-23)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
10(Mass of Tube-SOP MT-23)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
10(Area of Cross Section)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
16(Marking)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
13.6(Crush Test)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.

Complete

21 Aug, 2027

-
-

IS 4270 (2001)

Steel tubes used for water wells specification (Third Revision)

All type of Grade/Type/Size/Designation

11500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 6(Tensile Test & Flattening Test)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 7(Outer Diameter, Thickness, Mass & Straightness)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 9(Pipe ends, Angle of bevel & Root Face )	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 10(Outer Diameter & Overall Length)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 12(Bituminous Coating & Galvanizing )	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 14(Workmanship)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 6(Tensile Test & Flattening Test)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 7(Outer Diameter, Thickness, Mass & Straightness)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 9(Pipe ends, Angle of bevel & Root Face )	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 10(Outer Diameter & Overall Length)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 12(Bituminous Coating & Galvanizing )	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 14(Workmanship)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 6(Tensile Test & Flattening Test)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 7(Outer Diameter, Thickness, Mass & Straightness)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 9(Pipe ends, Angle of bevel & Root Face )	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 10(Outer Diameter & Overall Length)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 12(Bituminous Coating & Galvanizing )	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 14(Workmanship)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5.2(phosphorus)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5.2(sulphur)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 14(Workmanship)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 12(Bituminous Coating & Galvanizing )	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 10(Outer Diameter & Overall Length)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 9(Pipe ends, Angle of bevel & Root Face )	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 7(Outer Diameter, Thickness, Mass & Straightness)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 6(Tensile Test & Flattening Test)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 6(Tensile Test & Flattening Test)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 7(Outer Diameter, Thickness, Mass & Straightness)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 9(Pipe ends, Angle of bevel & Root Face)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 10(Outer Diameter & Overall Length)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 12(Bituminous Coating & Galvanizing)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 14(Workmanship)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
11.0(Alignment test IS 4270: 2001)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.

Complete

21 Aug, 2027

-
-

IS 7887 (1992)

Mild steel wire rod for general engineering purposes - Specification (First Revision)

All Grade / Type / Size / Designation

2500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 8(Workmanship)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 9(Nominal Diameter & Out Of Shape)	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 8(Workmanship)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 9(Nominal Diameter & Out Of Shape)	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 8(Freedom from defects)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 9(Nominal Diameter & Out Of Shape)	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
6.1(Carbon %)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
6.1(Manganese %)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
6.1(Phosphorus %)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
6.1(Sulphur %)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
6.1(Silicon %)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
6.1( Aluminium %)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
6.1(Carbon %)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
6.1(Manganese %)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
6.1(Phosphorus %)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
6.1(Sulphur %)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
6.1(Silicon %)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
6.1( Aluminium %)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
6.1(Carbon %)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
6.1(Manganese %)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
6.1(Phosphorus %)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
6.1(Sulphur %)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
6.1(Silicon %)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
6.1( Aluminium %)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 9(Out of Shape)	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 9(Nominal Diameter & Out Of Shape)	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 8(Workmanship)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 8(Workmanship)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 9(Nominal Diameter & Out Of Shape)	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Table 1 Note 3(Any Instrumental Method/Chemical Method)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Amendment 1(Any Instrumental Method/Chemical Method)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Amendment 1(Any Instrumental Method/Chemical Method)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Amendment 1(Any Instrumental Method/Chemical Method)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Amendment 1(By Calculation)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Table 1 Note 3(Any Instrumental Method/Chemical Method)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Amendment 1(Any Instrumental Method/Chemical Method)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Amendment 1(Any Instrumental Method/Chemical Method)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Amendment 1(Any Instrumental Method/Chemical Method)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Amendment 1(Any Instrumental Method/Chemical Method)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Amendment 1(By Calculation)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Table 1 Note 3(Copper)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Amendment 1(Niobium)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Amendment 1(Vanadium)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Amendment 1(Titanium)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Amendment 1(Micro Alloying Element (Nb+V+Ti))	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
9.1(Diameter - SOP-MT-23)	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
9.3(Out of Shape - SOP-MT-23)	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
11(Marking)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Table 1 Note 3(Copper)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Amendment 1(Niobium)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Amendment 1(Vanadium)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Amendment 1(Titanium)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Amendment 1(Micro Alloying Element (Nb+V+Ti))	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.

Complete

21 Aug, 2027

-
-

IS 11513 (2017)

Hot rolled carbon steel strip for cold rolling purposes - Specification (Second Revision)

All Grade / Type / Size / Designation

5600 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 8(Workmanship)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 9(Length, Width, Thickness, Crown, Edge Camber & Difference in Thickness Across Width )	-	2500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 8(Workmanship)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 9(Length, Width, Thickness, Crown, Edge Camber & Difference in Thickness Across Width )	-	2500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 8(Workmanship)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 9(Length, Width, Thickness, Crown, Edge Camber & Difference in Thickness Across Width )	-	2500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
6.1(Carbon %)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
6.1(Manganese %)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
6.1(Phosphorus %)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
6.1(Sulphur %)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
6.1(Silicon %)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
6.1( Copper %)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
6.1( Aluminium %)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
6.1( Nb)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
6.1(V)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
6.1( Ti)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
6.1(Boron)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
6.1( Nitrogen%)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
6.1(Microalloying)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
6.1(Carbon %)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
6.1(Manganese %)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
6.1(Phosphorus %)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
6.1(Sulphur %)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
6.1(Silicon %)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
6.1( Copper %)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
6.1( Aluminium %)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
6.1( Nb)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
6.1(V)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
6.1( Ti)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
6.1(Boron)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
6.1( Nitrogen%)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
6.1(Microalloying)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
6.1(Carbon %)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
6.1(Manganese %)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
6.1(Phosphorus %)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
6.1(Sulphur %)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
6.1(Silicon %)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
6.1( Copper %)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
6.1( Aluminium %)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
6.1( Nb)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
6.1(V)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
6.1( Ti)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
6.1(Boron)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
6.1( Nitrogen%)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
6.1(Microalloying)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 10(Weight)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 9.3(Crown)	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl.9.3.1(Difference in Thickness)	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 9.5(Edge Camber)	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl.9(Thickness)	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl.9(Width)	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 9(Length, Width, Thickness, Crown, Edge Camber & Difference in Thickness Across Width )	-	2500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 8(Workmanship)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 8(Workmanship)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 9(Length, Width, Thickness, Crown, Edge Camber & Difference in Thickness Across Width)	-	2500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
12(Marking)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.

Complete

21 Aug, 2027

-
-

First
Prev
1
2
3
4
Next
Last

Bureau of Indian Standards

The National Standards Body of India

Delta Testing and Research Laboratories Private Limited

Plot No. C-5, Block - C, Main Kanjhawala Road, Rajiv Nagar, Delhi, North West, Delhi, 110086

9811037450 info@deltatestinglab.com

Scope List