BIS - LIMS (Laboratory Information Management System)

Rajkot Metlab Services LLP, Rajkot

PL 29 30 Nr Tulip Party Plot, GONDAL ROAD, VAVDI, Rajkot, Rajkot, Gujarat, 360004

9725213602 testing@rajkotlab.com

Scope List

Reset

161 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

IS 18480 : Part 2 (2023)

Cross Recessed Tapping Screws Part 2 Countersunk Flat Head

19850 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause. 3.0(Dimenssions.)	-	2500	-
Clause. 3.0(Thread size.)	-	2500	-
Clause. 3.0(Length)	-	2500	-
Clause. 4.0(Material)	-	1000	-
Clause. 4.0(Thread)	-	3000	-
Clause. 4.0(Cross Recess)	-	1000	-
Clause. 4.0(Tolerances)	-	4000	-
Clause. 4.0(Mechnical and functional properties.)	-	6000	-
Clause. 4.0(Finish)	-	4500	-
Clause. 4.0(Acceptability)	-	1000	-
Clause.5.0(Designation)	-	1000	-
Clause.5.0(Marking)	-	1000	-

12 Jan, 2028

-
Included w.e.f 13.11.2025

IS 18480 : Part 1 (2023)

Cross Recessed Tapping Screws: Part 1 Pan Head

All Grade / Type / Size / Designation / Class

20050 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause. 3.0(Dimenssions.)	-	3000	-
Clause. 3.0(Thread size.)	-	3000	-
Clause. 3.0(Length)	-	3000	-
Clause. 4.0(Material)	-	1500	-
Clause. 4.0(Thread)	-	4500	-
Clause. 4.0(Cross Recess)	-	1500	-
Clause. 4.0(Tolerances)	-	4500	-
Clause. 4.0(Mechnical and functional properties.)	-	6000	-
Clause. 4.0(Finish)	-	5000	-
Clause. 4.0(Acceptability)	-	1500	-
Clause.5.0(Designation)	-	1500	-
Clause.5.0(Marking)	-	1500	-

12 Jan, 2028

-
Included w.e.f 13.11.2025

IS 18508 (2024)

Chipboard Screws ï¿½ Specification

20300 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause. 4.0(Dimenssions.)	-	3000	-
Clause. 4.0(Thread size.)	-	3000	-
Clause. 4.0(Length)	-	2000	-
Clause. 5.0(Material)	-	500	-
Clause. 5.0(Cross Recess)	-	500	-
Clause. 5.0(Tolerances)	-	4500	-
Clause. 5.0(Surface Condition)	-	4500	-
Clause. 5.0(Surface Coating)	-	4500	-
Clause.6.0(Acceptability)	-	500	-
Clause.6.0(Torque Testing)	-	2500	-
CClause.7.0(Hardness)	-	3500	-
Clause.8.0(Designation)	-	500	-
Clause.9.0(Marking)	-	500	-

12 Jan, 2028

-
Included w.e.f 08.12.2025

IS 18507 (2024)

Drywall Screws ï¿½ Specification

19800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause. 4.0(Dimenssions.)	-	1000	-
Clause. 4.0(Thread size.)	-	1000	-
Clause. 4.0(Length)	-	1000	-
Clause. 5.0(Material)	-	500	-
Clause. 5.0(Cross Recess)	-	500	-
Clause. 5.0(Tolerances)	-	4500	-
Clause. 5.0(Surface Condition)	-	4500	-
Clause. 5.0(Surface Coating)	-	4500	-
Clause. 5.0(Acceptability)	-	500	-
Clause.6.0(Torque Testing)	-	2000	-
Clause.7.0(Hardness)	-	2500	-
Clause.8.0(Designation)	-	500	-
Clause.9.0(Marking)	-	500	-

12 Jan, 2028

-
Included w.e.f 08.12.2025

IS 7485 : Part 2 (2018)

Countersunk flat head screws (common head style) with type H or Type Z Cross Recess - Product Grade A part 2 Steel Screws of Property Class 8.8, Stainless Steel Screws and Non - Ferrous Metal Screws ( Third Revision)

13150 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(Dimensions)	-	3000	-
4, table 2(Material)	-	500	-
4, table 2(Thread)	-	4000	-
4, table 2(Mechanical property)	-	5000	-
4, table 2(Tolerances)	-	4000	-
4, table 2(Cross recess)	-	500	-
4, table 2(Finish - coating)	-	3500	-
4, table 2(Surface integrity)	-	2000	-
4, table 2(Acceptability)	-	500	-
5(Designation)	-	500	-

12 Jan, 2028

-
Included w.e.f 08.12.2025

IS 7485 : Part 1 (2018)

Countersunk Flat Head Screws (Common head Style) With Type H or Type Z Cross Recess - Product Grade A Part 1 Steel Screws of Property Class 4.8 ( Third Revision)

13150 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(Dimensions)	-	3000	-
4, table 2(Material)	-	1000	-
4, table 2(General requirements)	-	1000	-
4, table 2(Thread)	-	4000	-
4, table 2(Mechanical property)	-	6000	-
4, table 2(Tolerances)	-	4000	-
4, table 2(Cross recess)	-	1500	-
4, table 2(Finish - coating)	-	5000	-
4, table 2(Surface integrity)	-	1000	-
4, table 2(Acceptability)	-	1000	-
5(Designation)	-	1000	-

12 Jan, 2028

-
Included w.e.f 08.12.2025

IS 7283 (1992)

Hot - Rolled bars for the production of bright bars and machined parts for engineering applications specification (First Revision)

7350 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 6(Workmanship)	-	100	-
Cl 7(Diameter & Out Of Round)	-	500	-
Cl 8(Decarburization)	-	1500	-
Cl 9(Inclusion)	-	1500	-
Cl 10(Hardenability)	-	1500	-
Cl 11(Size)	-	500	-
Cl 6(Workmanship)	-	100	-
Cl 7(Diameter & Out Of Round)	-	500	-
Cl 8(Decarburization)	-	1500	-
Cl 9(Inclusion)	-	1500	-
Cl 10(Hardenability)	-	1500	-
Cl 11(Size)	-	500	-
Cl 6(Workmanship)	-	100	-
Cl 7(Diameter & Out Of Round)	-	500	-
Cl 8(Decarburization)	-	1500	-
Cl 9(Inclusion)	-	1500	-
Cl 10(Hardenability)	-	1500	-
Cl 11(Size)	-	500	-
Cl 6(Workmanship)	-	100	-
Cl 7(Diameter & Out Of Round)	-	500	-
Cl 8(Decarburization)	-	1500	-
Cl 9(Inclusion)	-	1500	-
Cl 10(Hardenability)	-	1500	-
Cl 11(Size)	-	500	-
Cl 6(Workmanship)	-	100	-
Cl 7(Diameter & Out Of Round)	-	500	-
Cl 8(Decarburization)	-	1500	-
Cl 9(Inclusion)	-	1500	-
Cl 10(Hardenability)	-	1500	-
Cl 11(Size)	-	500	-
Cl 6(Workmanship)	-	100	-
Cl 7(Diameter & Out Of Round)	-	500	-
Cl 8(Decarburization)	-	1500	-
Cl 9(Inclusion)	-	1500	-
Cl 10(Hardenability)	-	1500	-
Cl 11(Size)	-	500	-
Cl 5(Material Test)	-	100	-
5, 5.1, 5.2(Chemical Composition - Carbon)	-	500	-
5, 5.1, 5.2(Chemical Composition - Sulphur)	-	500	-
5, 5.1, 5.2(Chemical Composition - Phosphorus)	-	500	-
5, 5.1, 5.2(Chemical Composition - Manganese)	-	500	-
5, 5.1, 5.2(Chemical Composition - Silicon)	-	500	-
5, 5.1, 5.2(Chemical Composition - Nickel)	-	500	-
5, 5.1, 5.2(Copper)	-	500	-
5, 5.1, 5.2(Chromium)	-	500	-
5, 5.1, 5.2(Chemical Composition - Lead)	-	500	-
5, 5.1, 5.2(Chemical Composition - Nitrogen)	-	500	-
Cl 11(Size)	-	500	-
Cl 10(Hardenability)	-	1500	-
Cl 9(Inclusion)	-	1500	-
Cl 8(Decarburization)	-	1500	-
Cl 7(Diameter & Out Of Round)	-	500	-
Cl 6(Workmanship)	-	100	-
11(Grain Size)	-	1500	-
Cl 6(Workmanship)	-	100	-
7(Diameter & Out Of Round)	-	500	-
Cl 8(Decarburization)	-	1500	-
Cl 9(Inclusion)	-	1500	-
Cl 10(Hardenability)	-	1500	-
Cl 11(Size)	-	500	-
14(Marking)	-	100	-
14(Marking)	-	100	-
14(Marking)	-	100	-
14(Marking)	-	100	-
5(Material - IS 7283)	-	100	-
7.3(Dimensional Cutting -IS 7283)	-	500	-

12 Jan, 2028

-
Included w.e.f 08.12.2025

IS 7452 (1990)

Hot rolled steel sections for doors, windows and ventilators - Specification

All Grade / Type / Size / Designation / Class

2500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
cl 6(Dimensions)	-	300	-
cl 7(MASS AND MASS TOLERANCE)	-	500	-
cl 8(SURFACE FINISH)	-	300	-
cl 9(BEND TEST)	-	1000	-
5.1(Carbon- IS 228(Part 1))	-	500	-
5.1(Sulphur- IS 228(Part 9))	-	500	-
5.1(Phosphorous- IS 228(Part 3))	-	500	-
5.1(Manganese- IS 228(Part 2))	-	500	-
5.1(Silicon- IS 228(Part 8))	-	500	-
5.1(Nitrogen-IS 228(P-19))	-	500	-
5.1(Copper- IS 228(P-15))	-	500	-
Cl 5.1(Carbon- IS 228(Part 1))	-	500	-
Cl 5.1(Sulphur- IS 228(Part 9))	-	500	-
Cl 5.1(Phosphorous- IS 228(Part 3))	-	500	-
Cl 5.1(Manganese- IS 228(Part 2))	-	500	-
Cl 5.1(Carbon Equivalent (CE))	-	3500	-
Cl 5.1(Silicon- IS 228(Part 2))	-	500	-
Cl 5.1(Nitrogen -IS 228(Part 19))	-	500	-
Clause-5 & 5.1(Carbon)	-	500	-
Clause-5 & 5.1(Sulphur)	-	500	-
Clause-5 & 5.1(Phosphors)	-	500	-
Clause-5 & 5.1(Manganese)	-	500	-
Clause-5 & 5.1(Aluminium)	-	500	-
Clause-5 & 5.1(Silicon)	-	500	-
Clause-5 & 5.1(Nitrogen)	-	500	-

12 Jan, 2028

-
Included w.e.f 12.11.2025

IS 11513 (2017)

Hot rolled carbon steel strip for cold rolling purposes - Specification (Second Revision)

3500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 8(Workmanship)	-	100	-
Cl 9(Length, Width, Thickness, Crown, Edge Camber & Difference in Thickness Across Width )	-	500	-
Cl 8(Workmanship)	-	100	-
Cl 9(Length, Width, Thickness, Crown, Edge Camber & Difference in Thickness Across Width )	-	500	-
Cl 8(Workmanship)	-	100	-
Cl 9(Length, Width, Thickness, Crown, Edge Camber & Difference in Thickness Across Width )	-	500	-
6.1(Carbon %)	-	500	-
6.1(Manganese %)	-	500	-
6.1(Phosphorus %)	-	500	-
6.1(Sulphur %)	-	500	-
6.1(Silicon %)	-	500	-
6.1( Copper %)	-	500	-
6.1( Aluminium %)	-	500	-
6.1( Nb)	-	500	-
6.1(V)	-	500	-
6.1( Ti)	-	500	-
6.1(Boron)	-	500	-
6.1( Nitrogen%)	-	500	-
6.1(Microalloying)	-	1500	-
6.1(Carbon %)	-	500	-
6.1(Manganese %)	-	500	-
6.1(Phosphorus %)	-	500	-
6.1(Sulphur %)	-	500	-
6.1(Silicon %)	-	500	-
6.1( Copper %)	-	500	-
6.1( Aluminium %)	-	500	-
6.1( Nb)	-	500	-
6.1(V)	-	500	-
6.1( Ti)	-	500	-
6.1(Boron)	-	500	-
6.1( Nitrogen%)	-	500	-
6.1(Microalloying)	-	1500	-
6.1(Carbon %)	-	500	-
6.1(Manganese %)	-	500	-
6.1(Phosphorus %)	-	500	-
6.1(Sulphur %)	-	500	-
6.1(Silicon %)	-	500	-
6.1( Copper %)	-	500	-
6.1( Aluminium %)	-	500	-
6.1( Nb)	-	500	-
6.1(V)	-	500	-
6.1( Ti)	-	500	-
6.1(Boron)	-	500	-
6.1( Nitrogen%)	-	500	-
6.1(Microalloying)	-	1500	-
Cl. 10(Weight)	-	300	-
Cl. 9.3(Crown)	-	100	-
Cl.9.3.1(Difference in Thickness)	-	500	-
Cl. 9.5(Edge Camber)	-	500	-
Cl.9(Thickness)	-	300	-
Cl.9(Width)	-	300	-
Cl 9(Length, Width, Thickness, Crown, Edge Camber & Difference in Thickness Across Width )	-	500	-
Cl 8(Workmanship)	-	100	-
Cl 8(Workmanship)	-	100	-
Cl 9(Length, Width, Thickness, Crown, Edge Camber & Difference in Thickness Across Width)	-	500	-
12(Marking)	-	100	-

12 Jan, 2028

-
Included w.e.f 12.11.2025

IS 320 (1980)

Specification for high tensile brass rods and sections (Other Than Forging Stock) (Second Revision)

4000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Tin Is 3685:1966/BS EN 15079:2015)	-	500	-
4(Lead IS 3685:1966/BS EN 15079:2015)	-	500	-
4(Iron IS 3685:1966/BS EN 15079:2015)	-	500	-
4(Manganese IS 3685:1966/BS EN 15079:2015)	-	500	-
4(Aluminium IS 3685:1966/BS EN 15079:2015)	-	500	-
4(Antimony IS 3685:1966/BS EN 15079:2015)	-	500	-
4(Zinc IS 3685:1966/BS EN 15079:2015)	-	500	-
6(Tensile Test IS 2654:1964)	-	1500	-
6.2(Mercurous Nitrate Test IS 2305:1962)	-	1000	-
8(Size and Tolerance IS 2826:1980)	-	300	-
4(Copper plus incidental nickel)	-	500	-
4(Total other elements)	-	500	-

12 Jan, 2028

-
Included w.e.f 31.12.2025

IS 740 (1977)

Specification for wrought aluminium and aluminium alloy rivet stock for general engineering purposes (Second Revision)

3500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1, Table 1of IS:740 (Designation & Condition 65032, 'W')(Tensile Strength of Size upto and including 25 mm)	-	500	-
4.1, Table 1of IS:740 (Designation & Condition 64430, 'W')(Tensile Strength of Size upto and including 25 mm)	-	500	-
4.1, Table 1of IS:740 (Designation & Condition 55000, 'OD')(Tensile Strength of Size upto and including 25 mm)	-	500	-
4.1, Table 1of IS:740 (Designation & Condition 55000, 'O or M')(Tensile Strength of Size upto and including 25 mm)	-	500	-
4.1, Table 1of IS:740 (Designation & Condition 53000, 'OD')(Tensile Strength of Size upto and including 25 mm)	-	500	-
4.1, Table 1of IS:740 (Designation & Condition 53000, 'O or M')(Tensile Strength of Size upto and including 25 mm)	-	500	-
4.1, Table 1of IS:740 (Designation & Condition 24345, 'W')(Tensile Strength of Size upto and including 12 mm)	-	500	-
4.1, Table 1of IS:740 (Designation & Condition 19000, '112')(Tensile Strength of Size upto and including 12 mm)	-	500	-
4.1, Table 1of IS:740 (Designation 65032)(Aluminium)	-	500	-
4.1, Table 1of IS:740 (Designation 65032)(Either Cr or Mn shall present)	-	500	-
4.1, Table 1of IS:740 (Designation 65032)(Chromium)	-	500	-
4.1, Table 1of IS:740 (Designation 65032)(Titanium and or other grain refining elements)	-	500	-
4.1, Table 1of IS:740 (Designation 65032)(Zinc)	-	500	-
4.1, Table 1of IS:740 (Designation 65032)(Manganese)	-	500	-
4.1, Table 1of IS:740 (Designation 65032)(Iron)	-	500	-
4.1, Table 1of IS:740 (Designation 65032)(Silicon)	-	500	-
4.1, Table 1of IS:740 (Designation 65032)(Magnesium)	-	500	-
4.1, Table 1of IS:740 (Designation 65032)(Copper)	-	500	-
4.1, Table 1of IS:740 (Designation 64430)(Aluminium)	-	500	-
4.1, Table 1of IS:740 (Designation 64430)(Cr+Mn)	-	500	-
4.1, Table 1of IS:740 (Designation 64430)(Chromium)	-	500	-
4.1, Table 1of IS:740 (Designation 64430)(Titanium and or other grain refining elements)	-	500	-
4.1, Table 1of IS:740 (Designation 64430)(Zinc)	-	500	-
4.1, Table 1of IS:740 (Designation 64430)(Manganese)	-	500	-
4.1, Table 1of IS:740 (Designation 64430)(Iron)	-	500	-
4.1, Table 1of IS:740 (Designation 64430)(Silicon)	-	500	-
4.1, Table 1of IS:740 (Designation 64430)(Magnesium)	-	500	-
4.1, Table 1of IS:740 (Designation 64430)(Copper)	-	500	-
4.1, Table 1of IS:740 (Designation 55000)(Aluminium)	-	500	-
4.1, Table 1of IS:740 (Designation 55000)(Cr+Mn)	-	500	-
4.1, Table 1of IS:740 (Designation 55000)(Chromium)	-	500	-
4.1, Table 1of IS:740 (Designation 55000)(Titanium and or other grain refining elements)	-	500	-
4.1, Table 1of IS:740 (Designation 55000)(Zinc)	-	500	-
4.1, Table 1of IS:740 (Designation 55000)(Manganese)	-	500	-
4.1, Table 1of IS:740 (Designation 55000)(Iron)	-	500	-
4.1, Table 1of IS:740 (Designation 55000)(Silicon)	-	500	-
4.1, Table 1of IS:740 (Designation 55000)(Magnesium)	-	500	-
4.1, Table 1of IS:740 (Designation 55000)(Copper)	-	500	-
4.1, Table 1of IS:740 (Designation 53000)(Aluminium)	-	500	-
4.1, Table 1of IS:740 (Designation 53000)(Cr+Mn)	-	500	-
4.1, Table 1of IS:740 (Designation 53000)(Chromium)	-	500	-
4.1, Table 1of IS:740 (Designation 53000)(Titanium and or other grain refining elements)	-	500	-
4.1, Table 1of IS:740 (Designation 53000)(Zinc)	-	500	-
4.1, Table 1of IS:740 (Designation 53000)(Manganese)	-	500	-
4.1, Table 1of IS:740 (Designation 53000)(Iron)	-	500	-
4.1, Table 1of IS:740 (Designation 53000)(Silicon)	-	500	-
4.1, Table 1of IS:740 (Designation 53000)(Magnesium)	-	500	-
4.1, Table 1of IS:740 (Designation 53000)(Copper)	-	500	-
4.1, Table 1of IS:740 (Designation 24345)(Aluminium)	-	500	-
4.1, Table 1of IS:740 (Designation 24345)(Chromium)	-	500	-
4.1, Table 1of IS:740 (Designation 24345)(Titanium and or other grain refining elements)	-	500	-
4.1, Table 1of IS:740 (Designation 24345)(Zinc)	-	500	-
4.1, Table 1of IS:740 (Designation 24345)(Manganese)	-	500	-
4.1, Table 1of IS:740 (Designation 24345)(Iron)	-	500	-
4.1, Table 1of IS:740 (Designation 24345)(Silicon)	-	500	-
4.1, Table 1of IS:740 (Designation 24345)(Magnesium)	-	500	-
4.1, Table 1of IS:740 (Designation 24345)(Copper)	-	500	-
4.1, Table 1of IS:740 (Designation 19000)(Cu+Mg+Si+Fe+Mn+Zn)	-	500	-
4.1, Table 1of IS:740 (Designation 19000)(Aluminium)	-	500	-
4.1, Table 1of IS:740 (Designation 19000)(Zinc)	-	500	-
4.1, Table 1of IS:740 (Designation 19000)(Manganese)	-	500	-
4.1, Table 1of IS:740 (Designation 19000)(Iron)	-	500	-
4.1, Table 1of IS:740 (Designation 19000)(Silicon)	-	500	-
4.1, Table 1of IS:740 (Designation 19000)(Magnesium)	-	500	-
4.1, Table 1of IS:740 (Designation 19000)(Copper)	-	500	-
6(Freedom From Defects)	-	100	-
7(Dmension And Tolerances)	-	300	-
9.2(Head Forming Test)	-	100	-
11(Marking)	-	100	-
4.1, Table 1of IS:740 (Designation & Condition 65032, 'W')(Tensile Strength of Size upto and including 25 mm)	-	500	-
4.1, Table 1of IS:740 (Designation & Condition 64430, 'W')(Tensile Strength of Size upto and including 25 mm)	-	500	-
4.1, Table 1of IS:740 (Designation & Condition 55000, 'OD')(Tensile Strength of Size upto and including 25 mm)	-	500	-
4.1, Table 1of IS:740 (Designation & Condition 55000, 'O or M')(Tensile Strength of Size upto and including 25 mm)	-	500	-
4.1, Table 1of IS:740 (Designation & Condition 53000, 'OD')(Tensile Strength of Size upto and including 25 mm)	-	500	-
4.1, Table 1of IS:740 (Designation & Condition 53000, 'O or M')(Tensile Strength of Size upto and including 25 mm)	-	500	-
4.1, Table 1of IS:740 (Designation & Condition 24345, 'W')(Tensile Strength of Size upto and including 12 mm)	-	500	-
4.1, Table 1of IS:740 (Designation & Condition 19000, '112')(Tensile Strength of Size upto and including 12 mm)	-	500	-
4.1, Table 1of IS:740 (Designation 65032)(Aluminium)	-	500	-
4.1, Table 1of IS:740 (Designation 65032)(Either Cr or Mn shall present)	-	500	-
4.1, Table 1of IS:740 (Designation 65032)(Chromium)	-	500	-
4.1, Table 1of IS:740 (Designation 65032)(Titanium and or other grain refining elements)	-	500	-
4.1, Table 1of IS:740 (Designation 65032)(Zinc)	-	500	-
4.1, Table 1of IS:740 (Designation 65032)(Manganese)	-	500	-
4.1, Table 1of IS:740 (Designation 65032)(Iron)	-	500	-
4.1, Table 1of IS:740 (Designation 65032)(Silicon)	-	500	-
4.1, Table 1of IS:740 (Designation 65032)(Magnesium)	-	500	-
4.1, Table 1of IS:740 (Designation 65032)(Copper)	-	500	-
4.1, Table 1of IS:740 (Designation 64430)(Aluminium)	-	500	-
4.1, Table 1of IS:740 (Designation 64430)(Cr+Mn)	-	500	-
4.1, Table 1of IS:740 (Designation 64430)(Chromium)	-	500	-
4.1, Table 1of IS:740 (Designation 64430)(Titanium and or other grain refining elements)	-	500	-
4.1, Table 1of IS:740 (Designation 64430)(Zinc)	-	500	-
4.1, Table 1of IS:740 (Designation 64430)(Manganese)	-	500	-
4.1, Table 1of IS:740 (Designation 64430)(Iron)	-	500	-
4.1, Table 1of IS:740 (Designation 64430)(Silicon)	-	500	-
4.1, Table 1of IS:740 (Designation 64430)(Magnesium)	-	500	-
4.1, Table 1of IS:740 (Designation 64430)(Copper)	-	500	-
4.1, Table 1of IS:740 (Designation 55000)(Aluminium)	-	500	-
4.1, Table 1of IS:740 (Designation 55000)(Cr+Mn)	-	500	-
4.1, Table 1of IS:740 (Designation 55000)(Chromium)	-	500	-
4.1, Table 1of IS:740 (Designation 55000)(Titanium and or other grain refining elements)	-	500	-
4.1, Table 1of IS:740 (Designation 55000)(Zinc)	-	500	-
4.1, Table 1of IS:740 (Designation 55000)(Manganese)	-	500	-
4.1, Table 1of IS:740 (Designation 55000)(Iron)	-	500	-
4.1, Table 1of IS:740 (Designation 55000)(Silicon)	-	500	-
4.1, Table 1of IS:740 (Designation 55000)(Magnesium)	-	500	-
4.1, Table 1of IS:740 (Designation 55000)(Copper)	-	500	-
4.1, Table 1of IS:740 (Designation 53000)(Aluminium)	-	500	-
4.1, Table 1of IS:740 (Designation 53000)(Cr+Mn)	-	500	-
4.1, Table 1of IS:740 (Designation 53000)(Chromium)	-	500	-
4.1, Table 1of IS:740 (Designation 53000)(Titanium and or other grain refining elements)	-	500	-
4.1, Table 1of IS:740 (Designation 53000)(Zinc)	-	500	-
4.1, Table 1of IS:740 (Designation 53000)(Manganese)	-	500	-
4.1, Table 1of IS:740 (Designation 53000)(Iron)	-	500	-
4.1, Table 1of IS:740 (Designation 53000)(Silicon)	-	500	-
4.1, Table 1of IS:740 (Designation 53000)(Magnesium)	-	500	-
4.1, Table 1of IS:740 (Designation 53000)(Copper)	-	500	-
4.1, Table 1of IS:740 (Designation 24345)(Aluminium)	-	500	-
4.1, Table 1of IS:740 (Designation 24345)(Chromium)	-	500	-
4.1, Table 1of IS:740 (Designation 24345)(Titanium and or other grain refining elements)	-	500	-
4.1, Table 1of IS:740 (Designation 24345)(Zinc)	-	500	-
4.1, Table 1of IS:740 (Designation 24345)(Manganese)	-	500	-
4.1, Table 1of IS:740 (Designation 24345)(Iron)	-	500	-
4.1, Table 1of IS:740 (Designation 24345)(Silicon)	-	500	-
4.1, Table 1of IS:740 (Designation 24345)(Magnesium)	-	500	-
4.1, Table 1of IS:740 (Designation 24345)(Copper)	-	500	-
4.1, Table 1of IS:740 (Designation 19000)(Cu+Mg+Si+Fe+Mn+Zn)	-	500	-
4.1, Table 1of IS:740 (Designation 19000)(Aluminium)	-	500	-
4.1, Table 1of IS:740 (Designation 19000)(Zinc)	-	500	-
4.1, Table 1of IS:740 (Designation 19000)(Manganese)	-	500	-
4.1, Table 1of IS:740 (Designation 19000)(Iron)	-	500	-
4.1, Table 1of IS:740 (Designation 19000)(Silicon)	-	500	-
4.1, Table 1of IS:740 (Designation 19000)(Magnesium)	-	500	-
4.1, Table 1of IS:740 (Designation 19000)(Copper)	-	500	-
6(Freedom From Defects)	-	100	-
7(Dmension And Tolerances)	-	300	-
9.2(Head Forming Test)	-	100	-
11(Marking)	-	100	-
4.1, Table 1of IS:740 (Designation & Condition 65032, 'W')(Tensile Strength of Size upto and including 25 mm)	-	500	-
4.1, Table 1of IS:740 (Designation & Condition 64430, 'W')(Tensile Strength of Size upto and including 25 mm)	-	500	-
4.1, Table 1of IS:740 (Designation & Condition 55000, 'OD')(Tensile Strength of Size upto and including 25 mm)	-	500	-
4.1, Table 1of IS:740 (Designation & Condition 55000, 'O or M')(Tensile Strength of Size upto and including 25 mm)	-	500	-
4.1, Table 1of IS:740 (Designation & Condition 53000, 'OD')(Tensile Strength of Size upto and including 25 mm)	-	500	-
4.1, Table 1of IS:740 (Designation & Condition 53000, 'O or M')(Tensile Strength of Size upto and including 25 mm)	-	500	-
4.1, Table 1of IS:740 (Designation & Condition 24345, 'W')(Tensile Strength of Size upto and including 12 mm)	-	500	-
4.1, Table 1of IS:740 (Designation & Condition 19000, '112')(Tensile Strength of Size upto and including 12 mm)	-	500	-
4.1, Table 1of IS:740 (Designation 65032)(Aluminium)	-	500	-
4.1, Table 1of IS:740 (Designation 65032)(Either Cr or Mn shall present)	-	500	-
4.1, Table 1of IS:740 (Designation 65032)(Chromium)	-	500	-
4.1, Table 1of IS:740 (Designation 65032)(Titanium and or other grain refining elements)	-	500	-
4.1, Table 1of IS:740 (Designation 65032)(Zinc)	-	500	-
4.1, Table 1of IS:740 (Designation 65032)(Manganese)	-	500	-
4.1, Table 1of IS:740 (Designation 65032)(Iron)	-	500	-
4.1, Table 1of IS:740 (Designation 65032)(Silicon)	-	500	-
4.1, Table 1of IS:740 (Designation 65032)(Magnesium)	-	500	-
4.1, Table 1of IS:740 (Designation 65032)(Copper)	-	500	-
4.1, Table 1of IS:740 (Designation 64430)(Aluminium)	-	500	-
4.1, Table 1of IS:740 (Designation 64430)(Cr+Mn)	-	500	-
4.1, Table 1of IS:740 (Designation 64430)(Chromium)	-	500	-
4.1, Table 1of IS:740 (Designation 64430)(Titanium and or other grain refining elements)	-	500	-
4.1, Table 1of IS:740 (Designation 64430)(Zinc)	-	500	-
4.1, Table 1of IS:740 (Designation 64430)(Manganese)	-	500	-
4.1, Table 1of IS:740 (Designation 64430)(Iron)	-	500	-
4.1, Table 1of IS:740 (Designation 64430)(Silicon)	-	500	-
4.1, Table 1of IS:740 (Designation 64430)(Magnesium)	-	500	-
4.1, Table 1of IS:740 (Designation 64430)(Copper)	-	500	-
4.1, Table 1of IS:740 (Designation 55000)(Aluminium)	-	500	-
4.1, Table 1of IS:740 (Designation 55000)(Cr+Mn)	-	500	-
4.1, Table 1of IS:740 (Designation 55000)(Chromium)	-	500	-
4.1, Table 1of IS:740 (Designation 55000)(Titanium and or other grain refining elements)	-	500	-
4.1, Table 1of IS:740 (Designation 55000)(Zinc)	-	500	-
4.1, Table 1of IS:740 (Designation 55000)(Manganese)	-	500	-
4.1, Table 1of IS:740 (Designation 55000)(Iron)	-	500	-
4.1, Table 1of IS:740 (Designation 55000)(Silicon)	-	500	-
4.1, Table 1of IS:740 (Designation 55000)(Magnesium)	-	500	-
4.1, Table 1of IS:740 (Designation 55000)(Copper)	-	500	-
4.1, Table 1of IS:740 (Designation 53000)(Aluminium)	-	500	-
4.1, Table 1of IS:740 (Designation 53000)(Cr+Mn)	-	500	-
4.1, Table 1of IS:740 (Designation 53000)(Chromium)	-	500	-
4.1, Table 1of IS:740 (Designation 53000)(Titanium and or other grain refining elements)	-	500	-
4.1, Table 1of IS:740 (Designation 53000)(Zinc)	-	500	-
4.1, Table 1of IS:740 (Designation 53000)(Manganese)	-	500	-
4.1, Table 1of IS:740 (Designation 53000)(Iron)	-	500	-
4.1, Table 1of IS:740 (Designation 53000)(Silicon)	-	500	-
4.1, Table 1of IS:740 (Designation 53000)(Magnesium)	-	500	-
4.1, Table 1of IS:740 (Designation 53000)(Copper)	-	500	-
4.1, Table 1of IS:740 (Designation 24345)(Aluminium)	-	500	-
4.1, Table 1of IS:740 (Designation 24345)(Chromium)	-	500	-
4.1, Table 1of IS:740 (Designation 24345)(Titanium and or other grain refining elements)	-	500	-
4.1, Table 1of IS:740 (Designation 24345)(Zinc)	-	500	-
4.1, Table 1of IS:740 (Designation 24345)(Manganese)	-	500	-
4.1, Table 1of IS:740 (Designation 24345)(Iron)	-	500	-
4.1, Table 1of IS:740 (Designation 24345)(Silicon)	-	500	-
4.1, Table 1of IS:740 (Designation 24345)(Magnesium)	-	500	-
4.1, Table 1of IS:740 (Designation 24345)(Copper)	-	500	-
4.1, Table 1of IS:740 (Designation 19000)(Cu+Mg+Si+Fe+Mn+Zn)	-	500	-
4.1, Table 1of IS:740 (Designation 19000)(Aluminium)	-	500	-
4.1, Table 1of IS:740 (Designation 19000)(Zinc)	-	500	-
4.1, Table 1of IS:740 (Designation 19000)(Manganese)	-	500	-
4.1, Table 1of IS:740 (Designation 19000)(Iron)	-	500	-
4.1, Table 1of IS:740 (Designation 19000)(Silicon)	-	500	-
4.1, Table 1of IS:740 (Designation 19000)(Magnesium)	-	500	-
4.1, Table 1of IS:740 (Designation 19000)(Copper)	-	500	-
6(Freedom From Defects)	-	100	-
7(Dmension And Tolerances)	-	300	-
9.2(Head Forming Test)	-	100	-
11(Marking)	-	100	-

12 Jan, 2028

-
Included w.e.f 27.01.2026

IS 6754 (1972)

Specification for aluminium alloy ingots for bearings

7500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
2.1(General requirements)	-	100	-
3.1(Manufacture)	-	100	-
4.1(Chemical composition)	-	4000	-
5.1(Shape and size)	-	500	-
6(Freedom from Defects)	-	100	-
7(Selection of Sample for chemical analysis)	-	4000	-
8(Retest)	-	100	-
9(Marking)	-	100	-
Table-1, Clause - 4.1(Copper)	-	500	-
Table-1, Clause - 4.1(Magnesium)	-	500	-
Table-1, Clause - 4.1(Manganese)	-	500	-
Table-1, Clause - 4.1(Titanium)	-	500	-
Table-1, Clause - 4.1(Silicon)	-	500	-
Table-1, Clause - 4.1(Nickel)	-	500	-
Table-1, Clause - 4.1(Tin)	-	500	-
Table-1, Clause - 4.1(Other elements)	-	500	-
Table-1, Clause - 4.1(Total of Fe+Si+Mn)	-	500	-
Table-1, Clause - 4.1(Aluminium)	-	500	-

12 Jan, 2028

-
Included w.e.f 27.01.2026

IS 6649 (1985)

Specification for hardened and tempered washers for high strength structural bolts and nuts (First Revision)

11250 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3 Table-1(Dimensions Type A- d1)	-	5000	-
3 Table-1(Dimensions Type A- d2)	-	5000	-
3 Table-1(Dimensions Type A- S)	-	5000	-
3 Table-2(Dimensions Type B&C- d)	-	5000	-
3 Table-2(Dimensions Type B&C- a)	-	5000	-
3 Table-2(Dimensions Type B&C- t)	-	5000	-
3 Table-2(Dimensions Type B&C- θ)	-	5000	-
3.1(Deviation)	-	250	-
3.2(Concentric)	-	250	-
3.3(Clearance)	-	250	-
5(Chemical Composition- Sulphur)	-	800	-
5(Chemical Composition- Phosphorus)	-	800	-
7(Hardness)	-	2500	-
8(Finish)	-	250	-
8.1(Freedom from defect)	-	250	-
8.1(Uniformity of zinc coating)	-	2500	-
8.1(Mass of zinc coating)	-	2500	-
8.1(Knife test (Adhesion of coating))	-	2500	-

12 Jan, 2028

-
Included w.e.f 12.11.2025

IS 277 (2018)

Galvanized steel strips and sheets (Plain And Corrugated) - Specification (Seventh Revision)

3500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 8.1(UTM)	-	1500	-
Cl 8.2(Press)	-	100	-
Cl 10(Galvanising Test)	-	500	-
Cl 12(Workmanship)	-	100	-
Cl 13(Weight)	-	100	-
Cl 14(Length, Width & Thickness)	-	300	-
Cl 8.1(UTM)	-	1500	-
Cl 8.2(Press)	-	100	-
Cl 10(Galvanising Test)	-	500	-
Cl 12(Workmanship)	-	100	-
Cl 13(Weight)	-	100	-
Cl 14(Length, Width & Thickness)	-	300	-
Cl 8.1(UTM)	-	1500	-
Cl 8.2(Press)	-	100	-
Cl 10(Galvanising Test)	-	500	-
Cl 12(Workmanship)	-	100	-
Cl 13(Weight)	-	100	-
Cl 14(Length, Width & Thickness)	-	300	-
7.4(Mass of Coating: Single Spot Test)	-	500	-
7.4(Mass of Coating: Triple Spot Test)	-	500	-
7.4(Mass of Coating: Single Spot Test)	-	500	-
7.4(Mass of Coating: Triple Spot Test)	-	500	-
7.4(Mass of Coating: Single Spot Test)	-	500	-
7.4(Mass of Coating: Triple Spot Test)	-	500	-
7.1 & 10.2(Mass of Coating: Single Spot Test)	-	500	-
7.1 & 10.2(Mass of Coating: Triple Spot Test)	-	500	-
7.1 & 10.2(Mass of Coating: Single Spot Test)	-	500	-
7.1 & 10.2(Mass of Coating: Triple Spot Test)	-	500	-
7.1 & 10.2(Mass of Coating: Single Spot Test)	-	500	-
7.1 & 10.2(Mass of Coating: Triple Spot Test)	-	500	-
7.1 & 10.2(Mass of Coating: Single Spot Test)	-	500	-
7.1 & 10.2(Mass of Coating: Triple Spot Test)	-	500	-
7.1 & 10.2(Mass of Coating: Single Spot Test)	-	500	-
7.1 & 10.2(Mass of Coating: Triple Spot Test)	-	500	-
7.1 & 10.2(Mass of Coating: Single Spot Test)	-	500	-
7.1 & 10.2(Mass of Coating: Triple Spot Test)	-	500	-
7.1 & 10.2(Mass of Coating: Single Spot Test)	-	500	-
7.1 & 10.2(Mass of Coating: Triple Spot Test)	-	500	-
7.1 & 10.2(Mass of Coating: Single Spot Test)	-	500	-
7.1 & 10.2(Mass of Coating: Triple Spot Test)	-	500	-
7.1 & 10.2(Mass of Coating: Single Spot Test)	-	500	-
7.1 & 10.2(Mass of Coating: Triple Spot Test)	-	500	-
5.1(phosphorus)	-	500	-
5.1(copper)	-	500	-
5.1(nitrogen)	-	500	-
5.1(nitrogen)	-	500	-
5.1(micro alloy)	-	500	-
5.1(micro alloy)	-	500	-
5.1(aluminium)	-	500	-
5.1(silicon )	-	500	-
5.1(silicon )	-	500	-
5.1(aluminium)	-	500	-
5.1(manganese)	-	500	-
5.1(phosphorus)	-	500	-
5.1(sulphur)	-	500	-
5.1(carbon)	-	500	-
5.1(manganese)	-	500	-
5.1(phosphorus)	-	500	-
5.1(sulphur)	-	500	-
5.1(carbon)	-	500	-
5.1(manganese)	-	500	-
5.1(phosphorus)	-	500	-
5.1(sulphur)	-	500	-
5.1(carbon)	-	500	-
5.1(manganese)	-	500	-
5.1(phosphorus)	-	500	-
5.1(sulphur)	-	500	-
5.1(carbon)	-	500	-
5.1(manganese)	-	500	-
5.1(phosphorus)	-	500	-
5.1(sulphur)	-	500	-
5.1(carbon)	-	500	-
5.1(manganese)	-	500	-
5.1(phosphorus)	-	500	-
5.1(sulphur)	-	500	-
5.1(carbon)	-	500	-
5.1(manganese)	-	500	-
5.1(phosphorus)	-	500	-
5.1(sulphur)	-	500	-
5.1(carbon)	-	500	-
5.1(manganese)	-	500	-
5.1(phosphorus)	-	500	-
5.1(sulphur)	-	500	-
5.1(carbon)	-	500	-
5.1(Titanium)	-	500	-
5.1(manganese)	-	500	-
5.1(phosphorus)	-	500	-
5.1(sulphur)	-	500	-
5.1(carbon)	-	500	-
5.1(manganese)	-	500	-
5.1(phosphorus)	-	500	-
5.1(sulphur)	-	500	-
5.1(carbon)	-	500	-
5.1(manganese)	-	500	-
5.1(phosphorus)	-	500	-
5.1(sulphur)	-	500	-
5.1(carbon)	-	500	-
5.1(manganese)	-	500	-
5.1(phosphorus)	-	500	-
5.1(sulphur)	-	500	-
5.1(carbon)	-	500	-
5.1(manganese)	-	500	-
5.1(phosphorus)	-	500	-
5.1(sulphur)	-	500	-
5.1(carbon)	-	500	-
5.1(manganese)	-	500	-
5.1(phosphorus)	-	500	-
5.1(sulphur)	-	500	-
5.1(carbon)	-	500	-
5.1(manganese)	-	500	-
5.1(phosphorus)	-	500	-
5.1(sulphur)	-	500	-
5.1(carbon)	-	500	-
Cl. 17(Marking )	-	100	-
Cl. 14 & Cl. 15(Pitch of corrugation (average of 4))	-	300	-
Cl. 14 & Cl. 15(Depth of corrugation (average of 4))	-	300	-
Cl. 14 & Cl. 15 (Cl. 14 & Cl 15 (Number of Corrugation))	-	300	-
Cl. 14 & Cl. 15 (Cl. 14 & Cl 15 (Difference between Diagonal))	-	300	-
Cl. 14 & Cl. 15 (Cl. 14 & Cl. 15 (Thickness))	-	300	-
Cl. 14 (Cl. 14 & Cl 15 (Width))	-	300	-
Cl. 14 (Cl. 14 & Cl 15 (Length))	-	300	-
Cl.12(Freedom from defects)	-	100	-
Cl. 8.1 (Cl. 8.1 (Percentage Elongation ))	-	500	-
Cl. 8.1 (Cl. 8.1 (Yield Stress))	-	500	-
Cl. 8.1 (Cl. 8.1 (Tensile Strength))	-	500	-
cl 5.1, T-1, Note-6, For reinforced steel(P)	-	500	-
cl 5.1, T-1, Note-5, For Microalloying elements(Nb+V+Ti+B)	-	500	-
cl 5.1, T-1, Note-5, For Microalloying elements(B)	-	500	-
cl 5.1, T-1, Note-5, For Microalloying elements(Ti)	-	500	-
cl 5.1, T-1, Note-5, For Microalloying elements(V)	-	500	-
cl 5.1, T-1, Note-5, For Microalloying elements(Nb)	-	500	-
cl 5.1, T-1, Note-4, For Cu bearing quality(Cu)	-	500	-
cl 5.1, T-1, Note-2, When Al-Si killed(Si)	-	500	-
cl 5.1, T-1, Note-2, When Al-Si killed(Al)	-	500	-
cl 5.1, T-1, Note-2, When Si killed(Si)	-	500	-
cl 5.1, T-1, Note-2, When Al killed(Al)	-	500	-
cl 5.1, T-1, Note-3(N2)	-	500	-
cl 5.1, T-1, designation For GP 550(P)	-	500	-
cl 5.1, T-1, designation For GP 550(S)	-	500	-
cl 5.1, T-1, designation For GP 550(Mn)	-	500	-
cl 5.1, T-1, designation For GP 550(C)	-	500	-
cl 5.1, T-1, Note-3(N2)	-	500	-
cl 5.1, T-1, designation For GP 450(P)	-	500	-
cl 5.1, T-1, designation For GP 450(S)	-	500	-
cl 5.1, T-1, designation For GP 450(Mn)	-	500	-
cl 5.1, T-1, designation For GP 450(C)	-	500	-
cl 5.1, T-1, Note-3(N2)	-	500	-
cl 5.1, T-1, designation For GP 350 class-2(P)	-	500	-
cl 5.1, T-1, designation For GP 350 class-2(S)	-	500	-
cl 5.1, T-1, designation For GP 350 class-2(Mn)	-	500	-
cl 5.1, T-1, designation For GP 350 class-2(C)	-	500	-
cl 5.1, T-1, Note-3(N2)	-	500	-
cl 5.1, T-1, designation For GP 350 class-1(P)	-	500	-
cl 5.1, T-1, designation For GP 350 class-1(S)	-	500	-
cl 5.1, T-1, designation For GP 350 class-1(Mn)	-	500	-
cl 5.1, T-1, designation For GP 350 class-1(C)	-	500	-
cl 5.1, T-1, Note-3(N2)	-	500	-
cl 5.1, T-1, designation For GP 300(P)	-	500	-
cl 5.1, T-1, designation For GP 300(S)	-	500	-
cl 5.1, T-1, designation For GP 300(Mn)	-	500	-
cl 5.1, T-1, designation For GP 300(C)	-	500	-
cl 5.1, T-1, Note-3(N2)	-	500	-
cl 5.1, T-1, designation For GP275(P)	-	500	-
cl 5.1, T-1, designation For GP275(S)	-	500	-
cl 5.1, T-1, designation For GP275(Mn)	-	500	-
cl 5.1, T-1, designation For GP275(C)	-	500	-
cl 5.1, T-1, Note-3(N2)	-	500	-
cl 5.1, T-1, designation For GP250(P)	-	500	-
cl 5.1, T-1, designation For GP250(S)	-	500	-
cl 5.1, T-1, designation For GP250(Mn)	-	500	-
cl 5.1, T-1, designation For GP250(C)	-	500	-
cl 5.1, T-1, Note-3(N2)	-	500	-
cl 5.1, T-1, designation For GP230(P)	-	500	-
cl 5.1, T-1, designation For GP230(S)	-	500	-
cl 5.1, T-1, designation For GP230(Mn)	-	500	-
cl 5.1, T-1, designation For GP230(C)	-	500	-
cl 5.1, T-1, Note-3(N2)	-	500	-
cl 5.1, T-1, designation For GPIF(P)	-	500	-
cl 5.1, T-1, designation For GPIF(S)	-	500	-
cl 5.1, T-1, designation For GPIF(Mn)	-	500	-
cl 5.1, T-1, designation For GPIF(C)	-	500	-
cl 5.1, T-1, Note-3(N2)	-	500	-
cl 5.1, T-1, designation For GPED(P)	-	500	-
cl 5.1, T-1, designation For GPED(S)	-	500	-
cl 5.1, T-1, designation For GPED(Mn)	-	500	-
cl 5.1, T-1, designation For GPED(C)	-	500	-
cl 5.1, T-1, Note-3(N2)	-	500	-
cl 5.1, T-1, designation For GPD(P)	-	500	-
cl 5.1, T-1, designation For GPD(S)	-	500	-
cl 5.1, T-1, designation For GPD(Mn)	-	500	-
cl 5.1, T-1, designation For GPD(C)	-	500	-
cl 5.1, T-1, Note-3(N2)	-	500	-
cl 5.1, T-1, designation For GPL(P)	-	500	-
cl 5.1, T-1, designation For GPL(S)	-	500	-
cl 5.1, T-1, designation For GPL(Mn)	-	500	-
cl 5.1, T-1, designation For GPL(C)	-	500	-
cl 5.1, T-1, Note-3(N2)	-	500	-
cl 5.1, T-1, designation For GC(P)	-	500	-
cl 5.1, T-1, designation For GC(S)	-	500	-
cl 5.1, T-1, designation For GC(Mn)	-	500	-
cl 5.1, T-1, designation For GC(C)	-	500	-
cl 5.1, T-1, Note-3(N2)	-	500	-
cl 5.1, T-1, designation For GPH (P)	-	500	-
cl 5.1, T-1, designation For GPH (S)	-	500	-
cl 5.1, T-1, designation For GPH (Mn)	-	500	-
cl 5.1, T-1, designation For GPH (C)	-	500	-
cl 5.1, T-1, Note-3(N2)	-	500	-
cl 5.1, T-1, designation For GP (P)	-	500	-
cl 5.1, T-1, designation For GP (S)	-	500	-
cl 5.1, T-1, designation For GP (Mn)	-	500	-
cl 5.1, T-1, designation For GP (C)	-	500	-
Cl.15.1.3.1(Overall width after corrugation)	-	300	-
Cl.15.1.3.1(Overall width before corrugation)	-	300	-
Cl. 9(Surface roughness)	-	100	-
Cl 14(Length, Width & Thickness)	-	300	-
Cl 13(Weight)	-	100	-
Cl 12(Workmanship)	-	100	-
Cl 10(Galvanising Test)	-	500	-
Cl 8.2(Press)	-	100	-
Cl 8.1(UTM)	-	1500	-
Cl 8.1(UTM)	-	1500	-
Cl 8.2(Press)	-	100	-
Cl 10(Galvanising Test)	-	1500	-
Cl 12(Workmanship)	-	100	-
Cl 13(Weight)	-	100	-
Cl 14.1(Thickness of plain sheet ( average of 8))	-	300	-
5(Titanium as Ti)	-	500	-
5(Niobium as Nb)	-	500	-
5(Boron as B)	-	500	-
5(Micro Alloying Elements (Nb+V+Ti + B))	-	500	-
5(Copper as Cu)	-	500	-
6(Tensile Strength-IS:1608(P1))	-	500	-
6(Yield Strength-IS:1608(P1))	-	500	-
6(Elongation-IS:1608(P1))	-	500	-
7.1(Zinc Coating Conformation)	-	500	-
7.3(X-Ray fluorescence method)	-	500	-
7.6(Coating finish type)	-	500	-
7.7(Surface treatment)	-	100	-
8.3(Bend test miniral diameter)	-	1000	-
Cl. 5.1(Carbon)	-	500	-
Cl. 5.1(Sulphur)	-	500	-
Cl. 5.1(Phosphorous)	-	500	-
Cl. 5.1(Manganese)	-	500	-
Cl. 5.1(Silicon)	-	500	-
Cl. 5.1(Titanium)	-	500	-
Cl. 5.1(Nitrogen)	-	500	-
Cl-5.1(Aluminium)	-	500	-
Cl. 5.1(Copper)	-	500	-
Cl. 5.1(Boron)	-	500	-
Cl. 5.1(Niobium)	-	500	-
Cl. 5.1(Vanadium)	-	500	-
Cl. 5.1(Ti+Nb+V+B)	-	500	-

12 Jan, 2028

-
Included w.e.f 31.12.2025 Exclusion : Cl. 9 (Surface roughness)

IS 2501 (1995)

Solid drawn copper tubesfor general engineering purposes - Specification (Third Revision)

All Grade / Type / Size / Designation

9950 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. No.5(Grades)	-	100	-
Cl. No.6(CONDITION)	-	100	-
Cl. No. 7(FREEDOM FROM DEFECTS)	-	100	-
Cl. No. 8.1(Dimensions)	-	300	-
Cl. No. 8.2(Tolerances)	-	100	-
Cl. No. 9(CHEMICAL COMPOSITION)	-	3500	-
Cl. No. 10.1.1, Table no. 1(Tensile Test)	-	1000	-
Cl. No. 10.2(Flattening and Doubling-Over Test)	-	1000	-
Cl. No. 10.3(Drift Expanding Test)	-	1000	-
Cl. No. 10.4(Non-Destructive Testing)	-	1000	-
Cl. No. 10.5("Microscopic Examination ( for 0 Condition Only )")	-	1000	-
Cl. No. 13(Marking)	-	100	-
10.6(Hydrogen Embrittlement Test)	-	3500	-
Cl. No.5(Grades)	-	-	-
Cl. No.6(CONDITION)	-	-	-
Cl. No. 7(FREEDOM FROM DEFECTS)	-	-	-
Cl. No. 8.1(Dimensions)	-	-	-
Cl. No. 8.2(Tolerances)	-	-	-
Cl. No. 9(CHEMICAL COMPOSITION)	-	-	-
Cl. No. 10.1.1, Table no. 1(Tensile Test)	-	-	-
Cl. No. 10.2(Flattening and Doubling-Over Test)	-	-	-
Cl. No. 10.3(Drift Expanding Test)	-	-	-
Cl. No. 10.4(Non-Destructive Testing)	-	-	-
Cl. No. 10.5("Microscopic Examination ( for 0 Condition Only )")	-	-	-
Cl. No. 13(Marking)	-	-	-
10.6(Hydrogen Embrittlement Test)	-	-	-

12 Jan, 2028

-
1. 10.6 (Hydrogen Embrittlement Test) Hydrogen Embrittlement Test In accordance with Clause 11 of IS 2501, the Hydrogen Embrittlement Test is required to ensure the suitability of copper for heating in a reducing atmosphere. This test is excluded from the current scope as the chemical composition (Clause 7) confirms the material grade as [Insert Grade, e.g., ETP], and the tubes are intended for applications where high-temperature hydrogen exposure is not a service condition.

IS 21 (2025)

Wrought Aluminium and Aluminium Alloys for Manufacture of Utensils - Specification (Fifth Revision)

12500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4(General requirements)	-	100	-
Cl-5.1(Material)	-	100	-
Cl-5.2(Chemical composition and mechanical properties of grades in Cl 5.1)	-	3000	-
Cl-5.3.1 a("Wrought Aluminium (with Minimum 99 Percent Al Content)- Iron+ Silicon")	-	500	-
Cl-5.3.1 b("Wrought Aluminium (with Minimum 99 Percent Al Content)- Chromium")	-	500	-
Cl-5.3.1 b("Wrought Aluminium (with Minimum 99 Percent Al Content)- Magnesium")	-	500	-
Cl-5.3.1 b("Wrought Aluminium (with Minimum 99 Percent Al Content)- Manganese")	-	500	-
Cl-5.3.1 b("Wrought Aluminium (with Minimum 99 Percent Al Content)- Nickel")	-	500	-
Cl-5.3.1 b("Wrought Aluminium (with Minimum 99 Percent Al Content)- Zinc")	-	500	-
Cl-5.3.1 b("Wrought Aluminium (with Minimum 99 Percent Al Content)- Titanium")	-	500	-
Cl-5.3.1 b("Wrought Aluminium (with Minimum 99 Percent Al Content)- Tin")	-	500	-
Cl-5.3.1 c("Wrought Aluminium (with Minimum 99 Percent Al Content)- Copper")	-	500	-
Cl-5.3.1 Note 1("Wrought Aluminium (with Minimum 99 Percent Al Content)- Aluminium")	-	500	-
Cl-5.3.1 d("Wrought Aluminium (with Minimum 99 Percent Al Content)- Others")	-	500	-
Cl-5.3.2, Table-1 (i)(Wrought Aluminium Alloys-Silicon)	-	500	-
Cl-5.3.2, Table-1 (ii)(Wrought Aluminium Alloys-Iron)	-	500	-
Cl-5.3.2, Table-1 (iii)(Wrought Aluminium Alloys-Copper)	-	500	-
Cl-5.3.2, Table-1 (iv)(Wrought Aluminium Alloys-Manganese)	-	500	-
Cl-5.3.2, Table-1 (v)(Wrought Aluminium Alloys-Magnesium)	-	500	-
Cl-5.3.2, Table-1 (vi)(Wrought Aluminium Alloys-Chromium)	-	500	-
Cl-5.3.2, Table-1 (vii)(Wrought Aluminium Alloys-Nickel)	-	500	-
Cl-5.3.2, Table-1 (viii)(Wrought Aluminium Alloys-Zinc)	-	500	-
Cl-5.3.2, Table-1 (ix)(Wrought Aluminium Alloys -Zirconium)	-	500	-
Cl-5.3.2, Table-1 (x)(Wrought Aluminium Alloys - Titanium)	-	500	-
Cl-5.3.2, Table-1 (Note 3)(Wrought Aluminium Alloys- Aluminium)	-	500	-
Cl-5.3.2, Table-1 (xi)(Wrought Aluminium Alloys- Others)	-	500	-
Cl 5.4(Lead)	-	500	-
Cl 5.4(Cadmium)	-	500	-
Cl 5.4(Arsenic)	-	500	-
Cl-7(Dimension)	-	300	-
Cl-8(EARING TEST (OPTIONAL TEST))	-	100	-
Cl-4(General requirements)	-	100	-
Cl-5.1(Material)	-	100	-
Cl-5.2(Chemical composition and mechanical properties of grades in Cl 5.1)	-	3000	-
Cl-5.3.1 a("Wrought Aluminium (with Minimum 99 Percent Al Content)- Iron+ Silicon")	-	500	-
Cl-5.3.1 b("Wrought Aluminium (with Minimum 99 Percent Al Content)- Chromium")	-	500	-
Cl-5.3.1 b("Wrought Aluminium (with Minimum 99 Percent Al Content)- Magnesium")	-	500	-
Cl-5.3.1 b("Wrought Aluminium (with Minimum 99 Percent Al Content)- Manganese")	-	500	-
Cl-5.3.1 b("Wrought Aluminium (with Minimum 99 Percent Al Content)- Nickel")	-	500	-
Cl-5.3.1 b("Wrought Aluminium (with Minimum 99 Percent Al Content)- Zinc")	-	500	-
Cl-5.3.1 b("Wrought Aluminium (with Minimum 99 Percent Al Content)- Titanium")	-	500	-
Cl-5.3.1 b("Wrought Aluminium (with Minimum 99 Percent Al Content)- Tin")	-	500	-
Cl-5.3.1 c("Wrought Aluminium (with Minimum 99 Percent Al Content)- Copper")	-	500	-
Cl-5.3.1 Note 1("Wrought Aluminium (with Minimum 99 Percent Al Content)- Aluminium")	-	500	-
Cl-5.3.1 d("Wrought Aluminium (with Minimum 99 Percent Al Content)- Others")	-	500	-
Cl-5.3.2, Table-1 (i)(Wrought Aluminium Alloys-Silicon)	-	500	-
Cl-5.3.2, Table-1 (ii)(Wrought Aluminium Alloys-Iron)	-	500	-
Cl-5.3.2, Table-1 (iii)(Wrought Aluminium Alloys-Copper)	-	500	-
Cl-5.3.2, Table-1 (iv)(Wrought Aluminium Alloys-Manganese)	-	500	-
Cl-5.3.2, Table-1 (v)(Wrought Aluminium Alloys-Magnesium)	-	500	-
Cl-5.3.2, Table-1 (vi)(Wrought Aluminium Alloys-Chromium)	-	500	-
Cl-5.3.2, Table-1 (vii)(Wrought Aluminium Alloys-Nickel)	-	500	-
Cl-5.3.2, Table-1 (viii)(Wrought Aluminium Alloys-Zinc)	-	500	-
Cl-5.3.2, Table-1 (ix)(Wrought Aluminium Alloys -Zirconium)	-	500	-
Cl-5.3.2, Table-1 (x)(Wrought Aluminium Alloys - Titanium)	-	500	-
Cl-5.3.2, Table-1 (Note 3)(Wrought Aluminium Alloys- Aluminium)	-	500	-
Cl-5.3.2, Table-1 (xi)(Wrought Aluminium Alloys- Others)	-	500	-
Cl 5.4(Lead)	-	500	-
Cl 5.4(Cadmium)	-	500	-
Cl 5.4(Arsenic)	-	500	-
Cl-7(Dimension)	-	300	-
Cl-8(EARING TEST (OPTIONAL TEST))	-	100	-

12 Jan, 2028

-
Included w.e.f 31.12.2025

IS 21 (1992)

Wrought aluminium and aluminium alloys for manufacture of utensils specification (Fourth Revision)

2800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2, Table 2 of IS:21 (Designation & Condition 64430, WP')(Bend Test (Radius of Bend))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 64430, WP')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 64430, WP')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 64430, WP')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 64430, WP')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 64430, WP')(Tensile Strength)	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 64430, WP')(0.2 Percent Proof Stress)	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 64430, 'W')(Bend Test (Radius of Bend))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 64430, 'W')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 64430, 'W')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 64430, 'W')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 64430, 'W')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 64430, 'W')(Tensile Strength)	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 64430, 'W')(0.2 Percent Proof Stress)	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 64430, 'O')(Bend Test (Radius of Bend))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 64430, 'O')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 64430, 'O')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 64430, 'O')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 64430, 'O')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 64430, 'O')(Tensile Strength)	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-B, 'H4')(Bend Test (Radius of Bend))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-B, 'H4')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-B, 'H4')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-B, 'H4')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-B, 'H4')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-B, 'H4')(Tensile Strength)	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-B, 'H3')(Bend Test (Radius of Bend))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-B, 'H3')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-B, 'H3')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-B, 'H3')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-B, 'H3')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-B, 'H3')(Tensile Strength)	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-B, 'H3')(0.2 Percent Proof Stress)	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-B, 'H2')(Bend Test (Radius of Bend))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-B, 'H2')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-B, 'H2')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-B, 'H2')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-B, 'H2')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-B, 'H2')(Tensile Strength)	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-B, 'H2')(0.2 Percent Proof Stress)	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-B, 'H1')(Bend Test (Radius of Bend))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-B, 'H1')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-B, 'H1')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-B, 'H1')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-B, 'H1')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-B, 'H1')(Tensile Strength)	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-B, 'H1')(0.2 Percent Proof Stress)	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-A, 'H3')(Bend Test (Radius of Bend))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-A, 'H3')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-A, 'H3')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-A, 'H3')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-A, 'H3')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-A, 'H3')(Tensile Strength)	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-A, 'H3')(0.2 Percent Proof Stress)	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-A, 'H2')(Bend Test (Radius of Bend))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-A, 'H2')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-A, 'H2')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-A, 'H2')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-A, 'H2')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-A, 'H2')(Tensile Strength)	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-A, 'H2')(0.2 Percent Proof Stress)	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-A, 'H1')(Bend Test (Radius of Bend))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-A, 'H1')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-A, 'H1')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-A, 'H1')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-A, 'H1')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-A, 'H1')(Tensile Strength)	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-A, 'H1')(0.2 Percent Proof Stress)	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-A, 'O')(Bend Test (Radius of Bend))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-A, 'O')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-A, 'O')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-A, 'O')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-A, 'O')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-A, 'O')(Tensile Strength)	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 40800, 'H4')(Bend Test (Radius of Bend))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 40800, 'H4')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 40800, 'H4')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 40800, 'H4')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 40800, 'H4')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 40800, 'H4')(Tensile Strength)	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 40800, 'H3')(Bend Test (Radius of Bend))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 40800, 'H3')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 40800, 'H3')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 40800, 'H3')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 40800, 'H3')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 40800, 'H3')(Tensile Strength)	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 40800, 'H2')(Bend Test (Radius of Bend))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 40800, 'H2')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 40800, 'H2')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 40800, 'H2')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 40800, 'H2')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 40800, 'H2')(Tensile Strength)	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 40800, 'H1')(Bend Test (Radius of Bend))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 40800, 'H1')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 40800, 'H1')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 40800, 'H1')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 40800, 'H1')(Tensile Strength)	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 40800, 'O')(Bend Test (Radius of Bend))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 40800, 'O')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 40800, 'O')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 40800, 'O')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 40800, 'O')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 40800, 'O')(Tensile Strength)	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'H4')(Bend Test (Radius of Bend))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'H4')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'H4')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'H4')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'H4')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'H4')(Tensile Strength)	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'H3')(Bend Test (Radius of Bend))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'H3')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'H3')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'H3')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'H3')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'H3')(Tensile Strength)	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'H2')(Bend Test (Radius of Bend))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'H2')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'H2')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'H2')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'H2')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'H2')(Tensile Strength)	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'H1')(Bend Test (Radius of Bend))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'H1')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'H1')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'H1')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'H1')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'H1')(Tensile Strength)	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'O')(Bend Test (Radius of Bend))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'O')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 40800, 'H1')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'O')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'O')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'O')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'O')(Tensile Strength)	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'H4')(Bend Test (Radius of Bend))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'H4')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'H4')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'H4')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'H4')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'H4')(Tensile Strength)	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'H3')(Bend Test (Radius of Bend))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'H3')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'H3')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'H3')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'H3')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'H3')(Tensile Strength)	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'H2')(Bend Test (Radius of Bend))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'H2')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'H2')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'H2')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'H2')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'H2')(Tensile Strength)	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'H1')(Bend Test (Radius of Bend))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'H1')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'H1')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'H1')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'H1')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'H1')(Tensile Strength)	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'O')(Bend Test (Radius of Bend))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'O')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'O')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'O')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'O')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'O')(Tensile Strength)	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 19600, 'H4')(Bend Test (Radius of Bend))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 19600, 'H4')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 19600, 'H4')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 19600, 'H4')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 19600, 'H4')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 19600, 'H4')(Tensile Strength)	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 19600, 'H2')(Bend Test (Radius of Bend))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 19600, 'H2')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 19600, 'H2')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 19600, 'H2')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 19600, 'H2')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 19600, 'H2')(Tensile Strength)	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 19600, 'O')(Bend Test (Radius of Bend))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 19600, 'O')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 19600, 'O')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 19600, 'O')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 19600, 'O')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 19600, 'O')(Tensile Strength)	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 19500, 'H4')(Bend Test (Radius of Bend))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 19500, 'H4')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 19500, 'H4')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 19500, 'H4')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 19500, 'H4')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 19500, 'H4')(Tensile Strength)	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 19500, 'H2')(Bend Test (Radius of Bend))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 19500, 'H2')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 19500, 'H2')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 19500, 'H2')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 19500, 'H2')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 19500, 'H2')(Tensile Strength)	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 19500, 'O')(Bend Test (Radius of Bend))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 19500, 'O')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 19500, 'O')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 19500, 'O')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 19500, 'O')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 19500, 'O')(Tensile Strength)	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'H4')(Bend Test (Radius of Bend))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'H4')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'H4')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'H4')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'H4')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'H4')(Tensile Strength)	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'H3')(Bend Test (Radius of Bend))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'H3')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'H3')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'H3')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'H3')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'H3')(Tensile Strength)	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'H2')(Bend Test (Radius of Bend))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'H2')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'H2')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'H2')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'H2')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'H2')(Tensile Strength)	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'H1')(Bend Test (Radius of Bend))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'H1')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'H1')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'H1')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'H1')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'H1')(Tensile Strength)	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'O')(Bend Test (Radius of Bend))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'O')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'O')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'O')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'O')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'O')(Tensile Strength)	-	1000	-
4.2, Table 1of IS:21 (Designation 64430)(Aluminium)	-	500	-
4.2, Table 1of IS:21 (Designation 64430)(Lead)	-	500	-
4.2, Table 1of IS:21 (Designation 64430)(Chromium)	-	500	-
4.2, Table 1of IS:21 (Designation 64430)(Titanium and or other grain refining elements)	-	500	-
4.2, Table 1of IS:21 (Designation 64430)(Zinc)	-	500	-
4.2, Table 1of IS:21 (Designation 64430)(Manganese)	-	500	-
4.2, Table 1of IS:21 (Designation 64430)(Iron)	-	500	-
4.2, Table 1of IS:21 (Designation 64430)(Silicon)	-	500	-
4.2, Table 1of IS:21 (Designation 64430)(Magnesium)	-	500	-
4.2, Table 1of IS:21 (Designation 64430)(Copper)	-	500	-
4.2, Table 1of IS:21 (Designation 51000-B)(Aluminium)	-	500	-
4.2, Table 1of IS:21 (Designation 51000-B)(Lead)	-	500	-
4.2, Table 1of IS:21 (Designation 51000-B)(Chromium)	-	500	-
4.2, Table 1of IS:21 (Designation 51000-B)(Zinc)	-	500	-
4.2, Table 1of IS:21 (Designation 51000-B)(Manganese)	-	500	-
4.2, Table 1of IS:21 (Designation 51000-B)(Iron)	-	500	-
4.2, Table 1of IS:21 (Designation 51000-B)(Silicon)	-	500	-
4.2, Table 1of IS:21 (Designation 51000-B)(Magnesium)	-	500	-
4.2, Table 1of IS:21 (Designation 51000-B)(Copper)	-	500	-
4.2, Table 1of IS:21 (Designation 51000-A)(Aluminium)	-	500	-
4.2, Table 1of IS:21 (Designation 51000-A)(Lead)	-	500	-
4.2, Table 1of IS:21 (Designation 51000-A)(Chromium)	-	500	-
4.2, Table 1of IS:21 (Designation 51000-A)(Zinc)	-	500	-
4.2, Table 1of IS:21 (Designation 51000-A)(Manganese)	-	500	-
4.2, Table 1of IS:21 (Designation 51000-A)(Iron)	-	500	-
4.2, Table 1of IS:21 (Designation 51000-A)(Silicon)	-	500	-
4.2, Table 1of IS:21 (Designation 51000-A)(Magnesium)	-	500	-
4.2, Table 1of IS:21 (Designation 51000-A)(Copper)	-	500	-
4.2, Table 1of IS:21 (Designation 40800)(Aluminium)	-	500	-
4.2, Table 1of IS:21 (Designation 40800)(Lead)	-	500	-
4.2, Table 1of IS:21 (Designation 40800)(Titanium and or other grain refining elements)	-	500	-
4.2, Table 1of IS:21 (Designation 40800)(Zinc)	-	500	-
4.2, Table 1of IS:21 (Designation 40800)(Manganese)	-	500	-
4.2, Table 1of IS:21 (Designation 40800)(Iron)	-	500	-
4.2, Table 1of IS:21 (Designation 40800)(Silicon)	-	500	-
4.2, Table 1of IS:21 (Designation 40800)(Magnesium)	-	500	-
4.2, Table 1of IS:21 (Designation 40800)(Copper)	-	500	-
4.2, Table 1of IS:21 (Designation 31500)(Aluminium)	-	500	-
4.2, Table 1of IS:21 (Designation 31500)(Titanium and or other grain refining elements)	-	500	-
4.2, Table 1of IS:21 (Designation 31500)(Lead)	-	500	-
4.2, Table 1of IS:21 (Designation 31500)(Manganese)	-	500	-
4.2, Table 1of IS:21 (Designation 31500)(Iron)	-	500	-
4.2, Table 1of IS:21 (Designation 31500)(Silicon)	-	500	-
4.2, Table 1of IS:21 (Designation 31500)(Magnesium)	-	500	-
4.2, Table 1of IS:21 (Designation 31500)(Copper)	-	500	-
4.2, Table 1of IS:21 (Designation 31000)(Aluminium)	-	500	-
4.2, Table 1of IS:21 (Designation 31000)(Lead)	-	500	-
4.2, Table 1of IS:21 (Designation 31000)(Chromium)	-	500	-
4.2, Table 1of IS:21 (Designation 31000)(Titanium and or other grain refining elements)	-	500	-
4.2, Table 1of IS:21 (Designation 31000)(Zinc)	-	500	-
4.2, Table 1of IS:21 (Designation 31000)(Manganese)	-	500	-
4.2, Table 1of IS:21 (Designation 31000)(Iron)	-	500	-
4.2, Table 1of IS:21 (Designation 31000)(Silicon)	-	500	-
4.2, Table 1of IS:21 (Designation 31000)(Magnesium)	-	500	-
4.2, Table 1of IS:21 (Designation 31000)(Copper)	-	500	-
4.2, Table 1of IS:21 (Designation 19600)(Aluminium)	-	500	-
4.2, Table 1of IS:21 (Designation 19600)(Cu+Si+Fe+Mn+Zn)	-	500	-
4.2, Table 1of IS:21 (Designation 19600)(Lead)	-	500	-
4.2, Table 1of IS:21 (Designation 19600)(Zinc)	-	500	-
4.2, Table 1of IS:21 (Designation 19600)(Manganese)	-	500	-
4.2, Table 1of IS:21 (Designation 19600)(Iron)	-	500	-
4.2, Table 1of IS:21 (Designation 19600)(Silicon)	-	500	-
4.2, Table 1of IS:21 (Designation 19600)(Copper)	-	500	-
4.2, Table 1of IS:21 (Designation 19500)(Aluminium)	-	500	-
4.2, Table 1of IS:21 (Designation 19500)(Cu+Si+Fe+Mn+Zn)	-	500	-
4.2, Table 1of IS:21 (Designation 19500)(Lead)	-	500	-
4.2, Table 1of IS:21 (Designation 19500)(Zinc)	-	500	-
4.2, Table 1of IS:21 (Designation 19500)(Manganese)	-	500	-
4.2, Table 1of IS:21 (Designation 19500)(Iron)	-	500	-
4.2, Table 1of IS:21 (Designation 19500)(Silicon)	-	500	-
4.2, Table 1of IS:21 (Designation 19500)(Copper)	-	500	-
4.2, Table 1of IS:21 (Designation 19000)(Lead)	-	500	-
4.2, Table 1of IS:21 (Designation 19000)(Cu+Mg+Si+Fe+Mn+Zn)	-	500	-
4.2, Table 1of IS:21 (Designation 19000)(Aluminium)	-	500	-
4.2, Table 1of IS:21 (Designation 19000)(Zinc)	-	500	-
4.2, Table 1of IS:21 (Designation 19000)(Manganese)	-	500	-
4.2, Table 1of IS:21 (Designation 19000)(Iron)	-	500	-
4.2, Table 1of IS:21 (Designation 19000)(Silicon)	-	500	-
4.2, Table 1of IS:21 (Designation 19000)(Magnesium)	-	500	-
4.2, Table 1of IS:21 (Designation 19000)(Copper)	-	500	-
4.1, & 4.1.1(Lead)	-	500	-
4.1.2(Aluminium)	-	500	-
5(Marking)	-	100	-
Cl.4.2 Table 1(Silicon - IS 504 and its parts or any other intrumental/chemical methods)	-	500	-
Cl.4.2 Table 1(Iron - IS 504 and its parts or any other intrumental/chemical methods)	-	500	-
Cl.4.2 Table 1(Copper - IS 228 and its parts or any other intrumental/chemical methods)	-	500	-
Cl.4.2 Table 1(Manganese - IS 228 and its parts or any other intrumental/chemical methods)	-	500	-
Cl.4.2 Table 1(Magnesium - IS 228 and its parts or any other intrumental/chemical methods)	-	500	-
Cl.4.2 Table 1(Chromium - IS 228 and its parts or any other intrumental/chemical methods)	-	500	-
Cl.4.2 Table 1(Zinc - IS 228 and its parts or any other intrumental/chemical methods)	-	500	-
Cl.4.2 Table 1(Titanium - IS 228 and its parts or any other intrumental/chemical methods)	-	500	-
4.2, Table 1of IS:21 (Designation 31500)(Zinc)	-	500	-

12 Jan, 2028

-
Included w.e.f 31.12.2025

IS 14329 (1995)

Malleable iron castings - Specification

All Grade / Type / Size / Designation / Class

4000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.0(FREEDOM FROM DEFECTS)	-	100	-
9.2.1, 10.1, Table 1(Nominal diameter)	-	300	-
9.2.1, 10.1, Table 1(Tolerances on nominal diameter)	-	300	-
9.2.1, 10.1, Table 1(Shank Dimensions, Diameter)	-	300	-
9.2.1, 10.1, Table 1(Shank Dimensions, Length)	-	300	-
9.2.1, 10.1, Table 1(Gauge length)	-	300	-
9.2.1, 10.1, Table 1(Length)	-	100	-
9.2.1, 10.1, Table 1(Radius at shoulder)	-	100	-
10.1(Tensile Test)	-	2500	-
10.2(Hardness Test)	-	2500	-
10.1, 10.2, Table 2(Grade Designation )	-	100	-
10.1, 10.2, Table 2(Sectional thickness represented)	-	100	-
10.1, 10.2, Table 2(Diameter of Test bar)	-	100	-
10.1, 10.2, Table 2(Tensile Strength )	-	2500	-
10.1, 10.2, Table 2(0.2 % Proof stress)	-	2500	-
10.1, 10.2, Table 2(Elongation)	-	2500	-
10.1, 10.2, Table 2(Hardness)	-	2500	-

12 Jan, 2028

-
Included w.e.f 12.11.2025

IS 1264 (1997)

Brass gravity die castings - Specification (Fourth Revision)

3050 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.0(Freedom from defects)	-	100	-
6.0(Shape)	-	100	-
6.0(Size)	-	100	-
6.0(Mass)	-	100	-
7.0(Cu)	-	500	-
7.0(Sn)	-	500	-
7.0(Pb)	-	500	-
7.0(Ni)	-	500	-
7.0(Fe)	-	500	-
7.0(Al)	-	500	-
7.0(Mn)	-	500	-
7.0(Si)	-	500	-
7.0(Total impurities excluding Ni Pb Al Zn)	-	500	-
9.0(Pressure test)	-	100	-
11(Marking)	-	100	-

12 Jan, 2028

-
Included w.e.f 31.12.2025

IS 7887 (1992)

Mild steel wire rod for general engineering purposes - Specification (First Revision)

5000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 8(Workmanship)	-	100	-
Cl 9(Nominal Diameter & Out Of Shape)	-	100	-
Cl 8(Workmanship)	-	100	-
Cl 9(Nominal Diameter & Out Of Shape)	-	100	-
Cl 8(Freedom from defects)	-	100	-
Cl 9(Nominal Diameter & Out Of Shape)	-	100	-
6.1(Carbon %)	-	500	-
6.1(Manganese %)	-	500	-
6.1(Phosphorus %)	-	500	-
6.1(Sulphur %)	-	500	-
6.1(Silicon %)	-	500	-
6.1( Aluminium %)	-	500	-
6.1(Carbon %)	-	500	-
6.1(Manganese %)	-	500	-
6.1(Phosphorus %)	-	500	-
6.1(Sulphur %)	-	500	-
6.1(Silicon %)	-	500	-
6.1( Aluminium %)	-	500	-
6.1(Carbon %)	-	500	-
6.1(Manganese %)	-	500	-
6.1(Phosphorus %)	-	500	-
6.1(Sulphur %)	-	500	-
6.1(Silicon %)	-	500	-
6.1( Aluminium %)	-	500	-
Cl. 9(Out of Shape)	-	100	-
Cl 9(Nominal Diameter & Out Of Shape)	-	100	-
Cl 8(Workmanship)	-	100	-
Cl 8(Workmanship)	-	100	-
Cl 9(Nominal Diameter & Out Of Shape)	-	100	-
Table 1 Note 3(Any Instrumental Method/Chemical Method)	-	2500	-
Amendment 1(Any Instrumental Method/Chemical Method)	-	2500	-
Amendment 1(Any Instrumental Method/Chemical Method)	-	2500	-
Amendment 1(Any Instrumental Method/Chemical Method)	-	2500	-
Amendment 1(By Calculation)	-	100	-
Table 1 Note 3(Any Instrumental Method/Chemical Method)	-	2500	-
Amendment 1(Any Instrumental Method/Chemical Method)	-	2500	-
Amendment 1(Any Instrumental Method/Chemical Method)	-	2500	-
Amendment 1(Any Instrumental Method/Chemical Method)	-	2500	-
Amendment 1(Any Instrumental Method/Chemical Method)	-	2500	-
Amendment 1(By Calculation)	-	100	-
Table 1 Note 3(Copper)	-	500	-
Amendment 1(Niobium)	-	500	-
Amendment 1(Vanadium)	-	500	-
Amendment 1(Titanium)	-	500	-
Amendment 1(Micro Alloying Element (Nb+V+Ti))	-	1500	-
9.1(Diameter - SOP-MT-23)	-	100	-
9.3(Out of Shape - SOP-MT-23)	-	100	-
11(Marking)	-	100	-
Table 1 Note 3(Copper)	-	100	-
Amendment 1(Niobium)	-	500	-
Amendment 1(Vanadium)	-	500	-
Amendment 1(Titanium)	-	500	-
Amendment 1(Micro Alloying Element (Nb+V+Ti))	-	1500	-
Cl 9("1.Outer dia (08) 2.Out of shape (08)")	-	100	-
Cl 9(Avarage Outer dia (08))	-	100	-
Cl 9(Maximum Out of shape (08))	-	100	-
Cl 8(Workmanship)	-	100	-
Cl 9(Nominal Diameter & Out Of Shape)	-	100	-
Cl 8(Workmanship)	-	100	-
Cl 9(Nominal Diameter & Out Of Shape)	-	100	-
Cl 8(Freedom from defects)	-	100	-
Cl 9(Nominal Diameter & Out Of Shape)	-	100	-
6.1(Carbon %)	-	500	-
6.1(Manganese %)	-	500	-
6.1(Phosphorus %)	-	500	-
6.1(Sulphur %)	-	500	-
6.1(Silicon %)	-	500	-
6.1( Aluminium %)	-	500	-
6.1(Carbon %)	-	500	-
6.1(Manganese %)	-	500	-
6.1(Phosphorus %)	-	500	-
6.1(Sulphur %)	-	500	-
6.1(Silicon %)	-	500	-
6.1( Aluminium %)	-	500	-
6.1(Carbon %)	-	500	-
6.1(Manganese %)	-	500	-
6.1(Phosphorus %)	-	500	-
6.1(Sulphur %)	-	500	-
6.1(Silicon %)	-	500	-
6.1( Aluminium %)	-	500	-
Cl. 9(Out of Shape)	-	100	-
Cl 9(Nominal Diameter & Out Of Shape)	-	100	-
Cl 8(Workmanship)	-	100	-
Cl 8(Workmanship)	-	100	-
Cl 9(Nominal Diameter & Out Of Shape)	-	100	-
Table 1 Note 3(Any Instrumental Method/Chemical Method)	-	2500	-
Amendment 1(Any Instrumental Method/Chemical Method)	-	2500	-
Amendment 1(Any Instrumental Method/Chemical Method)	-	2500	-
Amendment 1(Any Instrumental Method/Chemical Method)	-	2500	-
Amendment 1(By Calculation)	-	100	-
Table 1 Note 3(Any Instrumental Method/Chemical Method)	-	2500	-
Amendment 1(Any Instrumental Method/Chemical Method)	-	2500	-
Amendment 1(Any Instrumental Method/Chemical Method)	-	2500	-
Amendment 1(Any Instrumental Method/Chemical Method)	-	2500	-
Amendment 1(Any Instrumental Method/Chemical Method)	-	2500	-
Amendment 1(By Calculation)	-	100	-
Table 1 Note 3(Copper)	-	500	-
Amendment 1(Niobium)	-	500	-
Amendment 1(Vanadium)	-	500	-
Amendment 1(Titanium)	-	500	-
Amendment 1(Micro Alloying Element (Nb+V+Ti))	-	1500	-
9.1(Diameter - SOP-MT-23)	-	100	-
9.3(Out of Shape - SOP-MT-23)	-	100	-
11(Marking)	-	100	-
Table 1 Note 3(Copper)	-	500	-
Amendment 1(Niobium)	-	500	-
Amendment 1(Vanadium)	-	500	-
Amendment 1(Titanium)	-	500	-
Amendment 1(Micro Alloying Element (Nb+V+Ti))	-	1500	-
Cl 9("1.Outer dia (08) 2.Out of shape (08)")	-	100	-
Cl 9(Avarage Outer dia (08))	-	100	-
Cl 9(Maximum Out of shape (08))	-	100	-
Cl 8(Workmanship)	-	100	-
Cl 9(Nominal Diameter & Out Of Shape)	-	100	-
Cl 8(Workmanship)	-	100	-
Cl 9(Nominal Diameter & Out Of Shape)	-	100	-
Cl 8(Freedom from defects)	-	100	-
Cl 9(Nominal Diameter & Out Of Shape)	-	100	-
6.1(Carbon %)	-	500	-
6.1(Manganese %)	-	500	-
6.1(Phosphorus %)	-	500	-
6.1(Sulphur %)	-	500	-
6.1(Silicon %)	-	500	-
6.1( Aluminium %)	-	500	-
6.1(Carbon %)	-	500	-
6.1(Manganese %)	-	500	-
6.1(Phosphorus %)	-	500	-
6.1(Sulphur %)	-	500	-
6.1(Silicon %)	-	500	-
6.1( Aluminium %)	-	500	-
6.1(Carbon %)	-	500	-
6.1(Manganese %)	-	500	-
6.1(Phosphorus %)	-	500	-
6.1(Sulphur %)	-	500	-
6.1(Silicon %)	-	500	-
6.1( Aluminium %)	-	500	-
Cl. 9(Out of Shape)	-	100	-
Cl 9(Nominal Diameter & Out Of Shape)	-	100	-
Cl 8(Workmanship)	-	100	-
Cl 8(Workmanship)	-	100	-
Cl 9(Nominal Diameter & Out Of Shape)	-	100	-
Table 1 Note 3(Any Instrumental Method/Chemical Method)	-	2500	-
Amendment 1(Any Instrumental Method/Chemical Method)	-	2500	-
Amendment 1(Any Instrumental Method/Chemical Method)	-	2500	-
Amendment 1(Any Instrumental Method/Chemical Method)	-	2500	-
Amendment 1(By Calculation)	-	100	-
Table 1 Note 3(Any Instrumental Method/Chemical Method)	-	2500	-
Amendment 1(Any Instrumental Method/Chemical Method)	-	2500	-
Amendment 1(Any Instrumental Method/Chemical Method)	-	2500	-
Amendment 1(Any Instrumental Method/Chemical Method)	-	2500	-
Amendment 1(Any Instrumental Method/Chemical Method)	-	2500	-
Amendment 1(By Calculation)	-	100	-
Table 1 Note 3(Copper)	-	500	-
Amendment 1(Niobium)	-	500	-
Amendment 1(Vanadium)	-	500	-
Amendment 1(Titanium)	-	500	-
Amendment 1(Micro Alloying Element (Nb+V+Ti))	-	1500	-
9.1(Diameter - SOP-MT-23)	-	100	-
9.3(Out of Shape - SOP-MT-23)	-	100	-
11(Marking)	-	100	-
Table 1 Note 3(Copper)	-	500	-
Amendment 1(Niobium)	-	500	-
Amendment 1(Vanadium)	-	500	-
Amendment 1(Titanium)	-	500	-
Amendment 1(Micro Alloying Element (Nb+V+Ti))	-	1500	-
Cl 9("1.Outer dia (08) 2.Out of shape (08)")	-	100	-
Cl 9(Avarage Outer dia (08))	-	100	-
Cl 9(Maximum Out of shape (08))	-	100	-

12 Jan, 2028

-
Included w.e.f 12.11.2025

IS 410 (1977)

Specification for cold rolled brass sheet, strip and foil (Third Revision)

All Grade / Type / Size / Designation / Class

10200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.0(Freedom from defects)	-	100	-
6.1 Table-1(Cu)	-	500	-
6.1 Table-1(Pb)	-	500	-
6.1 Table-1(Fe)	-	500	-
6.1 Table-1(Total impurities including iron)	-	500	-
6.1 Table-1(Zn)	-	500	-
7.1.1(Tensile Test)	-	2500	-
Table-2(Thickness)	-	100	-
Table-2(Tensile Strength)	-	2000	-
Table-2(Elongation)	-	2000	-
Table-2(Vickers Hardness)	-	2000	-
Table-2(Transverse Bend)	-	1000	-
Table-2(Longitudinal Bend)	-	1000	-
7.1.1(Erichsen cupping values -IS 410)	-	1000	-
7.1.5(Grain Size - IS 410)	-	2000	-
8(Dimensions -IS 410)	-	100	-
11(Marking)	-	100	-

12 Jan, 2028

-
Included w.e.f. 04.11.2025

IS 15647 (2006)

Hot rolled steel narrow width strip for welded tubes and pipes

All Grade / Type / Size / Designation / Class

12200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 8(UTM)	-	1500	-
Cl 9(Press)	-	100	-
Cl 11(Workmanship)	-	100	-
Cl 12(Length, Width & Thickness)	-	300	-
Cl 13(Workmanship)	-	100	-
Cl 8(UTM)	-	1500	-
Cl 9(Press)	-	100	-
Cl 11(Workmanship)	-	100	-
Cl 12(Length, Width & Thickness)	-	300	-
Cl 13(Workmanship)	-	100	-
Cl 8(UTM)	-	1500	-
Cl 9(Press)	-	100	-
Cl 11(Workmanship)	-	100	-
Cl 12(Length, Width & Thickness)	-	300	-
Cl 13(Workmanship)	-	100	-
Cl. 12(Weight)	-	100	-
Cl. 12(Edge Camber)	-	100	-
Cl. 12(Thickness)	-	100	-
Cl. 8.2 Table 3(Elongation)	-	500	-
Cl. 8.2 Table 3(Yield Stress)	-	500	-
Cl 13(Workmanship)	-	100	-
Cl 12(Length, Width & Thickness)	-	300	-
Cl 11(Workmanship)	-	100	-
Cl 9(Press)	-	100	-
Cl 8(UTM)	-	1500	-
7(Chemical Composition)	-	2500	-
Cl 8(UTM)	-	1500	-
Cl 9(Press)	-	100	-
Cl 11(Workmanship)	-	100	-
Cl 12(Length, Width & Thickness)	-	300	-
Cl 13(Workmanship)	-	100	-
7(Carbon as C - IS:228)	-	500	-
7(Manganese as Mn-IS:228)	-	500	-
7(Sulphur as S- IS:228)	-	500	-
7(Phosphorus as P-IS:228)	-	500	-
7(Aluminium -IS:228)	-	500	-
7(Silicon as S-IS:228)	-	500	-
7(Nitrogen content -IS:228)	-	500	-
8(Tensile Strength-IS:1608(P1))	-	500	-
8(Yield Strength-IS:1608(P1))	-	500	-
8(Elongation -IS:1608(P1))	-	500	-
12(Width-SOP MT-23)	-	100	-
12(Thickness - SOP MT-23)	-	100	-
12(Edge Camber-SOP MT-23)	-	100	-
7(Carbon IS 228 (part 1) IS 8811: 1998)	-	500	-
7(Sulphur IS 228 (part 9) IS 8811: 1998)	-	500	-
7(Phosphorous IS 228 (part 3) IS 8811: 1998)	-	500	-
7(Maganese IS 228 (part 2) IS 8811: 1998)	-	500	-
7(Silicon IS 228 (part 1) IS 8811: 1998)	-	500	-
7(Chromium IS 8811: 1998)	-	500	-
7(Nickel IS 8811: 1998)	-	500	-
7(Boron IS 8811: 1998)	-	500	-
7(Titanium IS 8811: 1998)	-	500	-
7(Niobium IS 8811: 1998)	-	500	-
7(Vanadium IS 8811: 1998)	-	500	-
7(Aluminium IS 8811: 1998)	-	500	-
7(Copper IS 8811: 1998)	-	500	-
7(Nitrogen IS 228 (part 19) IS 8811: 1998)	-	500	-
5.2(Molybednum Astime 1086: 2014)	-	500	-
8.0(Bend test IS 1599:1985)	-	1000	-
9.0(Bend Test IS 1599:1985)	-	1000	-
12.0(Dimention IS 1730:1989)	-	300	-
Cl.7.1 and 7.2, Table 1(Carbon- IS 228(Part 1))	-	500	-
Cl.7.1 and 7.2, Table 1(Sulphur- IS 228(Part 9))	-	500	-
Cl.7.1 and 7.2, Table 1(Phosphorous- IS 228(Part 3))	-	500	-
Cl.7.1 and 7.2, Table 1(Manganese- IS 228(Part 2))	-	500	-
Cl.7.1 and 7.2, Table 1(Silicon- IS 228(Part 2))	-	500	-
Cl.7.1 and 7.2, Table 1(Nitrogen -IS 228(Part 19))	-	500	-
Cl 8(UTM)	-	-	-
Cl 9(Press)	-	-	-
Cl 11(Workmanship)	-	-	-
Cl 12(Length, Width & Thickness)	-	-	-
Cl 13(Workmanship)	-	-	-
Cl 8(UTM)	-	-	-
Cl 9(Press)	-	-	-
Cl 11(Workmanship)	-	-	-
Cl 12(Length, Width & Thickness)	-	-	-
Cl 13(Workmanship)	-	-	-
Cl 8(UTM)	-	-	-
Cl 9(Press)	-	-	-
Cl 11(Workmanship)	-	-	-
Cl 12(Length, Width & Thickness)	-	-	-
Cl 13(Workmanship)	-	-	-
Cl. 12(Weight)	-	-	-
Cl. 12(Edge Camber)	-	-	-
Cl. 12(Thickness)	-	-	-
Cl. 8.2 Table 3(Elongation)	-	-	-
Cl. 8.2 Table 3(Yield Stress)	-	-	-
Cl 13(Workmanship)	-	-	-
Cl 12(Length, Width & Thickness)	-	-	-
Cl 11(Workmanship)	-	-	-
Cl 9(Press)	-	-	-
Cl 8(UTM)	-	-	-
7(Chemical Composition)	-	-	-
Cl 8(UTM)	-	-	-
Cl 9(Press)	-	-	-
Cl 11(Workmanship)	-	-	-
Cl 12(Length, Width & Thickness)	-	-	-
Cl 13(Workmanship)	-	-	-
7(Carbon as C - IS:228)	-	-	-
7(Manganese as Mn-IS:228)	-	-	-
7(Sulphur as S- IS:228)	-	-	-
7(Phosphorus as P-IS:228)	-	-	-
7(Aluminium -IS:228)	-	-	-
7(Silicon as S-IS:228)	-	-	-
7(Nitrogen content -IS:228)	-	-	-
8(Tensile Strength-IS:1608(P1))	-	-	-
8(Yield Strength-IS:1608(P1))	-	-	-
8(Elongation -IS:1608(P1))	-	-	-
12(Width-SOP MT-23)	-	-	-
12(Thickness - SOP MT-23)	-	-	-
12(Edge Camber-SOP MT-23)	-	-	-
7(Carbon IS 228 (part 1) IS 8811: 1998)	-	-	-
7(Sulphur IS 228 (part 9) IS 8811: 1998)	-	-	-
7(Phosphorous IS 228 (part 3) IS 8811: 1998)	-	-	-
7(Maganese IS 228 (part 2) IS 8811: 1998)	-	-	-
7(Silicon IS 228 (part 1) IS 8811: 1998)	-	-	-
7(Chromium IS 8811: 1998)	-	-	-
7(Nickel IS 8811: 1998)	-	-	-
7(Boron IS 8811: 1998)	-	-	-
7(Titanium IS 8811: 1998)	-	-	-
7(Niobium IS 8811: 1998)	-	-	-
7(Vanadium IS 8811: 1998)	-	-	-
7(Aluminium IS 8811: 1998)	-	-	-
7(Copper IS 8811: 1998)	-	-	-
7(Nitrogen IS 228 (part 19) IS 8811: 1998)	-	-	-
5.2(Molybednum Astime 1086: 2014)	-	-	-
8.0(Bend test IS 1599:1985)	-	-	-
9.0(Bend Test IS 1599:1985)	-	-	-
12.0(Dimention IS 1730:1989)	-	-	-
Cl.7.1 and 7.2, Table 1(Carbon- IS 228(Part 1))	-	-	-
Cl.7.1 and 7.2, Table 1(Sulphur- IS 228(Part 9))	-	-	-
Cl.7.1 and 7.2, Table 1(Phosphorous- IS 228(Part 3))	-	-	-
Cl.7.1 and 7.2, Table 1(Manganese- IS 228(Part 2))	-	-	-
Cl.7.1 and 7.2, Table 1(Silicon- IS 228(Part 2))	-	-	-
Cl.7.1 and 7.2, Table 1(Nitrogen -IS 228(Part 19))	-	-	-

12 Jan, 2028

-
Included w.e.f 08.12.2025

IS 6603 (2024)

Stainless Steel Semi-Finished Products, Bars, Wire Rods and Bright Bars â Specification (Second Revision)

All Grade / Type / Size / Designation / Class

14000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl - 9.1,9.5,13.2(Thickness or Diameter)	-	100	-
Cl - 9.1,9.5,13.2(Proof Strength Rp 0.2 MP)	-	500	-
Cl - 9.1,9.5,13.2(Proof Strength Rp 1.0 MP)	-	500	-
Cl - 9.1,9.5,13.2(Tensile Strength)	-	500	-
Cl - 9.1,9.5,13.2(Elongation After Fracture Long.)	-	500	-
Cl - 9.1,9.5,13.2(Elongation After Fracture Tr.)	-	500	-
Cl - 9.1,9.5,13.2(Impact Energy (ISO-V) Long.)	-	1500	-
Cl - 9.1,9.5,13.2(Impact Energy (ISO-V) Tr.)	-	1500	-
Cl - 9.1,9.5,13.2(Resistance to Inter-Granular Corrosion in the Delivery Condition)	-	2500	-
Cl - 9.1,9.5,13.2(Resistance to Inter-Granular Corrosion in the Sensitized Condition)	-	2500	-
Cl - 9.1,9.5,13.2(Hardness)	-	500	-
Cl - 9.1,9.5,13.2(Elongation After Fracture)	-	500	-
Cl - 9.1,9.5,13.2(Impact Energy (ISO-V))	-	2500	-
Cl - 9.1,9.3,9.4,9.5,13.2(Thickness or Diameter)	-	100	-
Cl - 9.1,9.3,9.4,9.5,13.2(R MPa Max(Annealed))	-	50	-
Cl - 9.1,9.3,9.4,9.5,13.2(Hardness HB Max(Annealed))	-	500	-
Cl - 9.1,9.3,9.4,9.5,13.2(Heat Treatment Condition (Quenched + Tempered))	-	500	-
Cl - 9.1,9.3,9.4,9.5,13.2(R 0.2 MPa Min(Quenched + Tempered))	-	500	-
Cl - 9.1,9.3,9.4,9.5,13.2(R Mpa(Quenched + Tempered))	-	500	-
Cl - 9.1,9.3,9.4,9.5,13.2(A Percent Min Long.(Quenched + Tempered))	-	500	-
Cl - 9.1,9.3,9.4,9.5,13.2(A Percent Min Tr.(Quenched + Tempered))	-	500	-
Cl - 9.1,9.3,9.4,9.5,13.2(KV J Min Long.(Quenched + Tempered))	-	500	-
Cl - 9.1,9.3,9.4,9.5,13.2(KV J Min Long.(Quenched + Tempered))	-	1500	-
Cl - 9.1,9.3,9.4,9.5,13.2(Thickness or Diameter)	-	100	-
Cl - 9.1,9.3,9.4,9.5,13.2(R MPa Max(Annealed))	-	500	-
Cl - 9.1,9.3,9.4,9.5,13.2(Hardness HB Max(Annealed))	-	500	-
Cl - 9.1,9.3,9.4,9.5,13.2(Heat Treatment Condition (Quenched + Tempered))	-	500	-
Cl - 9.1,9.3,9.4,9.5,13.2(R 0.2 MPa Min(Quenched + Tempered))	-	500	-
Cl - 9.1,9.3,9.4,9.5,13.2(R Mpa(Quenched + Tempered))	-	500	-
Cl - 9.1,9.3,9.4,9.5,13.2(A Percent Min Long.(Quenched + Tempered))	-	500	-
Cl - 9.1,9.3,9.4,9.5,13.2(A Percent Min Tr.(Quenched + Tempered))	-	500	-
Cl - 9.1,9.3,9.4,9.5,13.2(KV J Min Long.(Quenched + Tempered))	-	500	-
Cl - 9.1,9.3,9.4,9.5,13.2(KV J Min Long.(Quenched + Tempered))	-	500	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 100 Deg. C)	-	2500	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 150 Deg. C)	-	2500	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 200 Deg. C)	-	2500	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 250 Deg. C)	-	2500	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 300 Deg. C)	-	2500	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 350 Deg. C)	-	2500	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 400 Deg. C)	-	2500	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 450 Deg. C)	-	2500	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 500 Deg. C)	-	2500	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 550 Deg. C)	-	2500	-
Cl - 9.2(Minimum 1 Percent Proof Strength at 100 Deg. C.)	-	2500	-
Cl - 9.2(Minimum 1 Percent Proof Strength at 150 Deg. C.)	-	2500	-
Cl - 9.2(Minimum 1 Percent Proof Strength at 200 Deg. C.)	-	2500	-
Cl - 9.2(Minimum 1 Percent Proof Strength at 250 Deg. C.)	-	2500	-
Cl - 9.2(Minimum 1 Percent Proof Strength at 300 Deg. C.)	-	2500	-
Cl - 9.2(Minimum 1 Percent Proof Strength at 350 Deg. C.)	-	2500	-
Cl - 9.2(Minimum 1 Percent Proof Strength at 400 Deg. C.)	-	2500	-
Cl - 9.2(Minimum 1 Percent Proof Strength at 450 Deg. C.)	-	2500	-
Cl - 9.2(Minimum 1 Percent Proof Strength at 550 Deg. C.)	-	2500	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 100 Deg. C)	-	2500	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 150 Deg. C)	-	2500	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 200 Deg. C)	-	2500	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 250 Deg. C)	-	2500	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 100 Deg. C)	-	2500	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 150 Deg. C)	-	2500	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 200 Deg. C)	-	2500	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 250 Deg. C)	-	2500	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 300 Deg. C)	-	2500	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 350 Deg. C)	-	2500	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 400 Deg. C)	-	2500	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 100 Deg. C)	-	2500	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 150 Deg. C)	-	2500	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 200 Deg. C)	-	2500	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 250 Deg. C)	-	2500	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 300 Deg. C)	-	2500	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 350 Deg. C)	-	2500	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 400 Deg. C)	-	2500	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 100 Deg. C)	-	2500	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 150 Deg. C)	-	2500	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 200 Deg. C)	-	2500	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 250 Deg. C)	-	2500	-
Cl-7.1, 7.2(C)	-	500	-
Cl-7.1, 7.2(Si)	-	500	-
Cl-7.1, 7.2(Mn)	-	500	-
Cl-7.1, 7.2(P)	-	500	-
Cl-7.1, 7.2(S)	-	500	-
Cl-7.1, 7.2(Cr)	-	500	-
Cl-7.1, 7.2(Mo)	-	500	-
Cl-7.1, 7.2(Ni)	-	500	-
Cl-7.1, 7.2(N)	-	500	-
Cl-7.1, 7.2(Cu)	-	500	-
Cl-7.1, 7.2(Ti)	-	500	-
Cl-7.1, 7.2(W)	-	500	-
Cl-7.1, 7.2(Nb)	-	500	-
cL-7.1, 7.2(Co)	-	500	-
Cl-7.1, 7.2(Ti: (C + N))	-	500	-
Cl-7.1, 7.2(V)	-	500	-
Cl-7.1, 7.2(Al)	-	500	-
Cl-7.1, 7.2(Boron)	-	500	-
Cl-7.1, 7.2(Tungsten)	-	500	-
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1((Titanium- Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.))	-	2500	-
Cl 6((freedom from defects))	-	100	-
Cl. 12((dimension and tolerance))	-	100	-
Cl. 14((corrosion resistance))	-	1500	-

12 Jan, 2028

-
Included w.e.f 27.01.2026

IS 1079 (2017)

Hot rolled carbon steel sheet, plate and strip - Specification (Seventh Revision)

All Grade / Type / Size / Designation / Class

8900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 8(UTM)	-	2000	-
Cl 9(Press)	-	100	-
Cl 10(Die Press)	-	100	-
Cl 12(Workmanship)	-	100	-
Cl 13(Length, Width & Thickness)	-	200	-
Cl 8(UTM)	-	1000	-
Cl 9(Press)	-	100	-
Cl 10(Die Press)	-	100	-
Cl 12(Workmanship)	-	100	-
Cl 13(Length, Width & Thickness)	-	200	-
Cl 8(UTM)	-	1000	-
Cl 9(Press)	-	100	-
Cl 10(Die Press)	-	100	-
Cl 12(Workmanship)	-	100	-
Cl 13(Length, Width & Thickness)	-	200	-
6.1(Carbon %)	-	500	-
6.1(Manganese %)	-	500	-
6.1(Phosphorus %)	-	500	-
6.1(Sulphur %)	-	500	-
6.1(Silicon %)	-	500	-
6.1( Copper %)	-	500	-
6.1( Aluminium %)	-	500	-
6.1( Nb)	-	500	-
6.1(V)	-	500	-
6.1( Ti)	-	500	-
6.1(Cr)	-	500	-
6.1(Mo)	-	500	-
6.1(Ni)	-	500	-
6.1( Nitrogen%)	-	500	-
6.1(Microalloying)	-	500	-
6.1(Carbon %)	-	500	-
6.1(Manganese %)	-	500	-
6.1(Phosphorus %)	-	500	-
6.1(Sulphur %)	-	500	-
6.1(Silicon %)	-	500	-
6.1( Copper %)	-	500	-
6.1( Aluminium %)	-	500	-
6.1( Nb)	-	500	-
6.1(V)	-	500	-
6.1( Ti)	-	500	-
6.1(Cr)	-	500	-
6.1(Mo)	-	500	-
6.1(Ni)	-	500	-
6.1( Nitrogen%)	-	500	-
6.1(Microalloying)	-	500	-
6.1(Carbon %)	-	500	-
6.1(Manganese %)	-	500	-
6.1(Phosphorus %)	-	500	-
6.1(Sulphur %)	-	500	-
6.1(Silicon %)	-	500	-
6.1( Copper %)	-	500	-
6.1( Aluminium %)	-	500	-
6.1( Nb)	-	500	-
6.1(V)	-	500	-
6.1( Ti)	-	500	-
6.1(Cr)	-	500	-
6.1(Mo)	-	500	-
6.1(Ni)	-	500	-
6.1( Nitrogen%)	-	500	-
6.1(Microalloying)	-	500	-
Cl.13(Out of square)	-	100	-
Cl.13(Flatness)	-	100	-
Cl.13(Camber)	-	100	-
Cl.13(Width)	-	100	-
Cl.13(Thickness)	-	100	-
Cl. 8.3, Cl. 8.3.1 Table 5 and Table 6(Percentage Elongation After Fracture at 5.65√A Gauge length)	-	500	-
Cl. 8.3, Cl. 8.3.1 Table 5 and Table 6(Percentage Elongation After Fracture at 80 mm Gauge length)	-	500	-
Cl. 8.3, Cl. 8.3.1 Table 5 and Table 6(Percentage Elongation After Fracture at 50 mm Gauge length)	-	500	-
Cl. 8.3, Cl. 8.3.1 Table 6(0.2% Proof Stress/Yield Stress)	-	500	-
Cl 13(Length, Width & Thickness)	-	200	-
Cl 12(Workmanship)	-	100	-
Cl 10(Die Press)	-	100	-
Cl 9(Press)	-	100	-
Cl 8(UTM)	-	1000	-
7(Material Test)	-	1000	-
9(Bend test)	-	1000	-
14(Calculation of weight)	-	100	-
Cl 8(UTM)	-	1000	-
Cl 9(Press)	-	100	-
Cl 10(Die Press)	-	100	-
Cl 12(Workmanship)	-	100	-
Cl 13(Length, Width & Thickness)	-	200	-
8, Table 5 & 6(Tensile Strength)	-	1000	-
8, Table 5 & 6(Yield Strength)	-	1000	-
8, Table 5 & 6(Elongation)	-	1000	-
Clause 10(Cuppping Test)	-	1000	-
Clause 12(Freedom from defect)	-	100	-
Clause 13(Length)	-	100	-
Clause 7, Table 3, Note 1(Any Instrumental Method/Chemical Method)	-	2500	-
Clause 7, Table 3, Note 1(By Calculation)	-	500	-
8, Table 5 & 6(Tensile Strength)	-	1000	-
8, Table 5 & 6(Yield Strength)	-	1000	-
8, Table 5 & 6(Elongation)	-	1000	-
Clause 10(Cuppping Test)	-	1000	-
Clause 12(Freedom from defect)	-	100	-
Clause 13(Length)	-	100	-
Clause 7, Table 3, Note 1(Boron)	-	500	-
Clause 7, Table 3, Note 1(B+Ti+Nb+V)	-	500	-
16(Marking and packing)	-	100	-
8, Table 5 & 6(IS 1608 Part 1)	-	1500	-
8, Table 5 & 6(IS 1608 Part 1)	-	1500	-
8, Table 5 & 6(IS 1608 Part 1)	-	1500	-
Clause 10(IS 10175)	-	1500	-
Clause 12(IS 1079)	-	1500	-
Clause 13(IS/ISO 16160)	-	1500	-
Clause 7, Table 3, Note 1(Boron)	-	500	-
Clause 7, Table 3, Note 1(B+Ti+Nb+V)	-	500	-
Cl 8(UTM)	-	-	-
Cl 9(Press)	-	-	-
Cl 10(Die Press)	-	-	-
Cl 12(Workmanship)	-	-	-
Cl 13(Length, Width & Thickness)	-	-	-
Cl 8(UTM)	-	-	-
Cl 9(Press)	-	-	-
Cl 10(Die Press)	-	-	-
Cl 12(Workmanship)	-	-	-
Cl 13(Length, Width & Thickness)	-	-	-
Cl 8(UTM)	-	-	-
Cl 9(Press)	-	-	-
Cl 10(Die Press)	-	-	-
Cl 12(Workmanship)	-	-	-
Cl 13(Length, Width & Thickness)	-	-	-
6.1(Carbon %)	-	-	-
6.1(Manganese %)	-	-	-
6.1(Phosphorus %)	-	-	-
6.1(Sulphur %)	-	-	-
6.1(Silicon %)	-	-	-
6.1( Copper %)	-	-	-
6.1( Aluminium %)	-	-	-
6.1( Nb)	-	-	-
6.1(V)	-	-	-
6.1( Ti)	-	-	-
6.1(Cr)	-	-	-
6.1(Mo)	-	-	-
6.1(Ni)	-	-	-
6.1( Nitrogen%)	-	-	-
6.1(Microalloying)	-	-	-
6.1(Carbon %)	-	-	-
6.1(Manganese %)	-	-	-
6.1(Phosphorus %)	-	-	-
6.1(Sulphur %)	-	-	-
6.1(Silicon %)	-	-	-
6.1( Copper %)	-	-	-
6.1( Aluminium %)	-	-	-
6.1( Nb)	-	-	-
6.1(V)	-	-	-
6.1( Ti)	-	-	-
6.1(Cr)	-	-	-
6.1(Mo)	-	-	-
6.1(Ni)	-	-	-
6.1( Nitrogen%)	-	-	-
6.1(Microalloying)	-	-	-
6.1(Carbon %)	-	-	-
6.1(Manganese %)	-	-	-
6.1(Phosphorus %)	-	-	-
6.1(Sulphur %)	-	-	-
6.1(Silicon %)	-	-	-
6.1( Copper %)	-	-	-
6.1( Aluminium %)	-	-	-
6.1( Nb)	-	-	-
6.1(V)	-	-	-
6.1( Ti)	-	-	-
6.1(Cr)	-	-	-
6.1(Mo)	-	-	-
6.1(Ni)	-	-	-
6.1( Nitrogen%)	-	-	-
6.1(Microalloying)	-	-	-
Cl.13(Out of square)	-	-	-
Cl.13(Flatness)	-	-	-
Cl.13(Camber)	-	-	-
Cl.13(Width)	-	-	-
Cl.13(Thickness)	-	-	-
Cl. 8.3, Cl. 8.3.1 Table 5 and Table 6(Percentage Elongation After Fracture at 5.65√A Gauge length)	-	-	-
Cl. 8.3, Cl. 8.3.1 Table 5 and Table 6(Percentage Elongation After Fracture at 80 mm Gauge length)	-	-	-
Cl. 8.3, Cl. 8.3.1 Table 5 and Table 6(Percentage Elongation After Fracture at 50 mm Gauge length)	-	-	-
Cl. 8.3, Cl. 8.3.1 Table 6(0.2% Proof Stress/Yield Stress)	-	-	-
Cl 13(Length, Width & Thickness)	-	-	-
Cl 12(Workmanship)	-	-	-
Cl 10(Die Press)	-	-	-
Cl 9(Press)	-	-	-
Cl 8(UTM)	-	-	-
7(Material Test)	-	-	-
9(Bend test)	-	-	-
14(Calculation of weight)	-	-	-
Cl 8(UTM)	-	-	-
Cl 9(Press)	-	-	-
Cl 10(Die Press)	-	-	-
Cl 12(Workmanship)	-	-	-
Cl 13(Length, Width & Thickness)	-	-	-
8, Table 5 & 6(Tensile Strength)	-	-	-
8, Table 5 & 6(Yield Strength)	-	-	-
8, Table 5 & 6(Elongation)	-	-	-
Clause 10(Cuppping Test)	-	-	-
Clause 12(Freedom from defect)	-	-	-
Clause 13(Length)	-	-	-
Clause 7, Table 3, Note 1(Any Instrumental Method/Chemical Method)	-	-	-
Clause 7, Table 3, Note 1(By Calculation)	-	-	-
8, Table 5 & 6(Tensile Strength)	-	-	-
8, Table 5 & 6(Yield Strength)	-	-	-
8, Table 5 & 6(Elongation)	-	-	-
Clause 10(Cuppping Test)	-	-	-
Clause 12(Freedom from defect)	-	-	-
Clause 13(Length)	-	-	-
Clause 7, Table 3, Note 1(Boron)	-	-	-
Clause 7, Table 3, Note 1(B+Ti+Nb+V)	-	-	-
16(Marking and packing)	-	-	-
8, Table 5 & 6(IS 1608 Part 1)	-	-	-
8, Table 5 & 6(IS 1608 Part 1)	-	-	-
8, Table 5 & 6(IS 1608 Part 1)	-	-	-
Clause 10(IS 10175)	-	-	-
Clause 12(IS 1079)	-	-	-
Clause 13(IS/ISO 16160)	-	-	-
Clause 7, Table 3, Note 1(Boron)	-	-	-
Clause 7, Table 3, Note 1(B+Ti+Nb+V)	-	-	-

12 Jan, 2028

-
Included w.e.f 29.10.2025

IS 3601 (2006)

Steel tubes for mechanical and general engineering purposes - Specification (Second Revision)

All Grade / Type / Size / Designation / Class

12200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Material)	-	3000	-
13(Mechanical Testing)	-	3000	-
6.0(Workmanship)	-	100	-
4.1(Sulphur-Percentage by mass)	-	500	-
4.1(Phosphorus-Percentage by mass)	-	500	-
8.0(Straightness)	-	100	-
19.1.1, 24.1.1, 28.1.1, 33.1.1(Dimensions- Outside Dia)	-	100	-
19.1.2, 24.1.2, 28.1.2, 33.1.2(Dimensions- Thickness)	-	100	-
11.1(Surface Protection)	-	100	-
11.2(Surface Protection)	-	100	-
13.1.3(Tensile Strength)	-	500	-
13.1.1(Yield Stress)	-	500	-
13.1.2(Elongation)	-	500	-
13.2(Flattening Test)	-	500	-
13.3(Bend Test (Strip))	-	500	-
13.4(Bend Test (Whole Tube))	-	500	-
13.5(Drift Expansion Test)	-	500	-
13.6(Crush Test)	-	500	-
19.1.3(Height of Internal Fin)	-	100	-
6.0(Workmanship)	-	100	-
4.1(Sulphur-Percentage by mass)	-	500	-
4.1(Phosphorus-Percentage by mass)	-	500	-
8.0(Straightness)	-	500	-
19.1.1, 24.1.1, 28.1.1, 33.1.1(Dimensions- Outside Dia)	-	100	-
19.1.2, 24.1.2, 28.1.2, 33.1.2(Dimensions- Thickness)	-	100	-
11.1(Surface Protection)	-	500	-
11.2(Surface Protection)	-	500	-
13.1.3(Tensile Strength)	-	500	-
13.1.1(Yield Stress)	-	500	-
13.1.2(Elongation)	-	500	-
13.2(Flattening Test)	-	500	-
13.3(Bend Test (Strip))	-	500	-
13.4(Bend Test (Whole Tube))	-	500	-
13.5(Drift Expansion Test)	-	500	-
13.6(Crush Test)	-	500	-
19.1.3(Height of Internal Fin)	-	500	-
Cl. 10 Annex B Cl. 17, Cl. 19(Moment of inertia)	-	100	-
Cl. 10 Annex B Cl. 17, Cl. 19(Radius of gyration)	-	100	-
Cl. 10 Annex B Cl. 17, Cl. 19(Modulus of section)	-	100	-
Cl. 10 Annex B Cl. 17, Cl. 19(Area of cross section)	-	100	-
Cl. 19.1.3(Internal Fin Height)	-	100	-
Cl. 10 Annex B Cl. 17, Cl. 19(Mass)	-	100	-
Cl. 9(Length)	-	100	-
4.0 (a)(Carbon as C - IS:8811)	-	500	-
4.0 (b)(Manganese as Mn - IS:8811)	-	500	-
4.0 (b)(Manganese as Mn - IS:8811)	-	500	-
4.0 (c)(Micro Alloying elements (Nb+V+Ti))	-	500	-
4.0 (f)(Nitrogen content)	-	500	-
9(Length -SOP MT-23)	-	100	-
10(Outside diameter-SOP MT-23)	-	100	-
10(Thickness - SOP MT-23)	-	100	-
10(Mass of Tube-SOP MT-23)	-	100	-
10(Area of Cross Section)	-	100	-
16(Marking)	-	100	-
CL 10("1.Outer dia (04) 2.Thickness (08)")	-	100	-
CL 10(Minimum Outer dia (04))	-	100	-
CL 10(Maximum Outer dia (04))	-	100	-
Cl-10(" Minimum Thickness (08)")	-	100	-
CL 10(Maximum Thickness (08))	-	100	-

12 Jan, 2028

-
Included w.e.f 06.01.2026

IS 2831 (2012)

Carbon steel cast billet ingots, billets, blooms and slabs for re-rolling into structural steel (Ordinary Quality) - Specification (Fourth Revision)

11800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 6.1, Table 1(Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl. 6.1, Table 1(Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl. 6.1, Table 1(Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl. 6.1, Table 1(Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl. 6.1, Table 1(Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl. 6.1, Table 1(Aluminium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl. 6.1, Table 1(Nitrogen- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl. 6.1, Table 1(Copper- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl. 6.1, Table 1(Niobium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl. 6.1, Table 1(Vanadium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl. 6.1, Table 1(Titanium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
9( FREEDOM FROM DEFECTS)	-	100	-
10.1.a)( Macro examination IS 11371)	-	1000	-
10.1.b)( Sulphur print tests IS 12037)	-	1000	-
11 & 12(DIMENSIONS and Tolerances)	-	100	-
11(Dimensions)	-	100	-
10.2(Bend)	-	500	-
10.3(Chamber)	-	100	-
11(Dimensions)	-	100	-
10.2(Bend)	-	500	-
10.3(Chamber)	-	100	-
Clause 6.1.1(IS 2831 : 2012)	-	100	-
Cl. 11, 12 Table 3(Thickness )	-	100	-
Cl. 11, 12 Table 3(Width Across Flat)	-	100	-
Clause 9.4(Camber)	-	100	-
Clause 9.3(Bend)	-	100	-
Clause 6.1.1(By calculation)	-	100	-
Table 1 Note 2(Any Instrumental Method/Chemical Method)	-	2500	-
Clause 6.1.1(By calculation)	-	100	-
Table 1 Note 2(Any Instrumental Method/Chemical Method)	-	2500	-
Table 1 Note 2(Any Instrumental Method/Chemical Method)	-	2500	-
Clause 6.1.1(Carbon Equivalent (CE))	-	100	-
Table 1 Note 2(Nb+V+Ti)	-	1500	-
8(Selection of Test sample)	-	100	-
13(Marking)	-	100	-
Clause 6.1.1(Carbon Equivalent (CE))	-	1500	-
Table 1 Note 2(Nb+V+Ti)	-	500	-

12 Jan, 2028

-
Included w.e.f. 13.11.2025

IS 1367 : Part 13 (2020)

Technical Supply Conditions for Threaded Steel Fasteners Part 13 Hot Dip Galvanized Coatings on Threaded Fasteners ( Third Revision )

8800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1.1(Chemical Composition)	-	4000	-
7.0(Mechanical Propoerties ( Proof load & Tesnsile Strength))	-	4000	-
8.1(Appearance of zinc coating)	-	2000	-
8.3(Zinc coating thickness)	-	2000	-
8.4(Adhesion of Zinc Coating)	-	2000	-

12 Jan, 2028

-
Included w.e.f 12.11.2025

IS 1364 : Part 3 (2018)

Hexagon Head Bolts, Screws and Nuts of Product Grades A and B Part 2 Hexagon Head Screws ( Size Range M 1.6 to M 64 ) ( Fifth Revision )

22800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 3(Dimension)	-	4000	-
Cl. 4 and Table 3(Threads and tolerances)	-	5000	-
Cl. 4 and Table 3(Mechanical Properties)	-	11000	-
Cl. 4 and Table 3(Finish – Coating)	-	4000	-
Cl. 4 and Table 3(Surface integrity)	-	8000	-

12 Jan, 2028

-
Included w.e.f 12.11.2025

IS 10748 (2004)

Hot - Rolled steel strip for welded tubes and pipes - Specification (Second Revision)

All Grade / Type / Size / Designation / Class

11050 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 8 & Table 3(UTM)	-	1000	-
Cl 9(Press)	-	100	-
Cl 11(Workmanship)	-	100	-
Cl 12 & 13(Length, Width & Thickness)	-	200	-
Cl 8 & Table 3(UTM)	-	1000	-
Cl 9(Press)	-	100	-
Cl 11(Workmanship)	-	100	-
Cl 12 & 13(Length, Width & Thickness)	-	200	-
Cl 8 & Table 3(UTM)	-	1000	-
Cl 9(Press)	-	100	-
Cl 11(Workmanship)	-	100	-
Cl 12 & 13(Length, Width & Thickness)	-	200	-
7.1(Carbon %)	-	500	-
7.1(Manganese %)	-	500	-
7.1(Phosphorus %)	-	500	-
7.1(Sulphur %)	-	500	-
7.1(Silicon %)	-	500	-
7.1( Copper %)	-	500	-
7.1( Aluminium %)	-	500	-
7.1( Nb)	-	500	-
7.1(V)	-	500	-
7.1( Ti)	-	500	-
7.1(Cr)	-	500	-
7.1(Mo)	-	500	-
7.1(Ni)	-	500	-
7.1( Nitrogen%)	-	500	-
7.1(CE)	-	500	-
7.1(Carbon %)	-	500	-
7.1(Manganese %)	-	500	-
7.1(Phosphorus %)	-	500	-
7.1(Sulphur %)	-	500	-
7.1(Silicon %)	-	500	-
7.1( Copper %)	-	500	-
7.1( Aluminium %)	-	500	-
7.1( Nb)	-	500	-
7.1(V)	-	500	-
7.1( Ti)	-	500	-
7.1(Cr)	-	500	-
7.1(Mo)	-	500	-
7.1(Ni)	-	500	-
7.1( Nitrogen%)	-	500	-
7.1(CE)	-	500	-
7.1(Carbon %)	-	500	-
7.1(Manganese %)	-	500	-
7.1(Phosphorus %)	-	500	-
7.1(Sulphur %)	-	500	-
7.1(Silicon %)	-	500	-
7.1( Copper %)	-	500	-
7.1( Aluminium %)	-	500	-
7.1( Nb)	-	500	-
7.1(V)	-	500	-
7.1( Ti)	-	500	-
7.1(Cr)	-	500	-
7.1(Mo)	-	500	-
7.1(Ni)	-	500	-
7.1( Nitrogen%)	-	500	-
7.1(CE)	-	500	-
Table 1 ( Clauses 7.1 ,7.2 )(TITANIUM)	-	500	-
Table 1 ( Clauses 7.1 ,7.2 )(VANADIUM)	-	500	-
Table 1 ( Clauses 7.1 ,7.2 )(NIOBIUM)	-	500	-
Table 1 ( Clauses 7.1 ,7.2 )(CARBON EQUIVELENT )	-	500	-
Table 1 ( Clauses 7.1 ,7.2 )(Molybdenum)	-	500	-
Table 1 ( Clauses 7.1 ,7.2 )(Chromium)	-	500	-
Table 1 ( Clauses 7.1 ,7.2 )(Nickel)	-	500	-
Table 1 ( Clauses 7.1 ,7.2 )( ALUMINIUM)	-	500	-
Table 1 ( Clauses 7.1 ,7.2 )(SILICON)	-	500	-
Table 1 ( Clauses 7.1 ,7.2 )(NITROGEN)	-	500	-
Table 1 ( Clauses 7.1 ,7.2 )(MANGANESE)	-	500	-
Table 1 ( Clauses 7.1 ,7.2 )(PHOSPHURS)	-	500	-
Table 1 ( Clauses 7.1 ,7.2 )(SULPHUR)	-	500	-
Table 1 ( Clauses 7.1 ,7.2 )( CARBON)	-	500	-
Cl. 14(Weight)	-	100	-
Cl. 12, 13(Camber)	-	100	-
Cl. 12, 13(Thickness)	-	100	-
Cl. 8, Table 3(Elongation)	-	500	-
Cl. 8, Table 3(Yield Stress)	-	500	-
Cl 12 & 13(Length, Width & Thickness)	-	300	-
Cl 11(Workmanship)	-	100	-
Cl 9(Press)	-	100	-
Cl 8 & Table 3(UTM)	-	1000	-
Cl 8 & Table 3(UTM)	-	1000	-
Cl 9(Press)	-	100	-
Cl 11(Workmanship)	-	100	-
Cl 12 & 13(Length, Width & Thickness)	-	300	-
7.0 (7)(Micro Alloying elements - IS:8811)	-	1500	-
8.0 (1)(Tensile Strength-IS:1608(P1))	-	500	-
8.0 (2)(Yield Strength-IS:1608(P1))	-	500	-
8.0 (3)(Elongation on 5.65 SoA GL-IS:1608(P1))	-	500	-
12 (1)(Width - SOP MT-23)	-	100	-
12 (2)(Thickness- SOP MT-23)	-	100	-
12 (3)(Mass of Strip- SOP MT-23)	-	100	-
15.0 & 15.1(Coil edges - IS:10748)	-	100	-
15.0 & 15.2(Surface finish - IS:10748)	-	100	-
15.0 & 15.5(Telescopicity - IS:10748)	-	100	-
15(Condition of Coil)	-	100	-
16(Marking)	-	100	-
3.4(Vehicle Fuel System)	-	100	-
9(Protective Treatment)	-	100	-
Table 1 ( Clauses 7.1 ,7.2 )(Tungsten (W))	-	500	-
Table 1 ( Clauses 7.1 ,7.2 )(Boron (B))	-	500	-
CL 12(Average Width (04))	-	100	-
CL 12(Average Thickness (08))	-	100	-

12 Jan, 2028

-
Included w.e.f. 04.11.2025

IS 1285 (2023)

WROUGHT ALUMINIUM AND ALUMINIUM ALLOYS EXTRUDED ROUND TUBE AND HOLLOW SECTIONS FOR GENERAL ENGINEERINGPURPOSES SPECIFICATION

All Grade / Type / Size / Designation / Class

12500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1("The extruded round tube and hollow sections shall be sound and visually free from harmful defects. ")	-	1000	-
6.2(Slight discoloration due to heat treatment, minor polishing marks and spiral marks due to roll straightening shall not be a cause for rejection.)	-	1000	-
8("Dimensions and tolerances of the material shall be as laid down in the Indian Standards indicated below: a) Extruded round tube IS 2673; and b) Extruded hollow sections IS 6477.")	-	1000	-
9(" Extruded round tubes and hollow sections shall be made from alloys specified in IS 733. 9.2 The chemical analysis of the material shall be carried out either in accordance with the methods specified in IS 504 (Part 1 to 12) and IS 504 (Part 13 to 16) or by any other established instrumental/chemical method. In case of any dispute the method specified in relevant parts of IS 504 shall be used as referee method. However, when the method is not given in IS 504, the referee method shall be as agreed to between the purchaser and the manufacturer. ")	-	1000	-
10(Tensile test)	-	2500	-
Cl.9.1(Aluminium- IS 504 and its parts or any other intrumental/chemical methods)	-	1000	-
Cl.9.1(Copper- IS 504 and its parts or any other intrumental/chemical methods)	-	1000	-
Cl.9.1(Magnesium- IS 504 and its parts or any other intrumental/chemical methods)	-	1000	-
Cl.9.1(Silicon- IS 504 and its parts or any other intrumental/chemical methods)	-	1000	-
Cl.9.1(Iron- IS 504 and its parts or any other intrumental/chemical methods)	-	1000	-
Cl.9.1(Manganese- IS 504 and its parts or any other intrumental/chemical methods)	-	1000	-
Cl.9.1(Zinc- IS 504 and its parts or any other intrumental/chemical methods)	-	1000	-
Cl.9.1(Titanium and/ or other grain refining elements- IS 504 and its parts or any other intrumental/chemical methods)	-	1000	-
Cl.9.1(Chromium- IS 504 and its parts or any other intrumental/chemical methods)	-	1000	-
Cl.9.1(Remarks (Ti+V) - IS 504 and its parts or any other intrumental/chemical methods)	-	2000	-
Cl.9.1(Remarks (Cr+Mn) - IS 504 and its parts or any other intrumental/chemical methods)	-	2000	-
Cl.9.1(Remarks (Total Impurities)- IS 504 and its parts or any other intrumental/chemical methods)	-	2000	-

12 Jan, 2028

-
Included w.e.f 08.12.2025

First
Prev
2
3
4
5
Next
Last

Bureau of Indian Standards

The National Standards Body of India

Rajkot Metlab Services LLP, Rajkot

PL 29 30 Nr Tulip Party Plot, GONDAL ROAD, VAVDI, Rajkot, Rajkot, Gujarat, 360004

9725213602 testing@rajkotlab.com

Scope List