BIS - LIMS (Laboratory Information Management System)

ALAIPURIA TEST HOUSE PRIVATE LIMITED, GHAZIABAD

H-11 Durga Industrial Park, Near Major Mohit Sharma Rajender Nagar Metro Station, Sahibabad, Ghaziabad,, Ghaziabad, Ghaziabad, Uttar Pradesh, 201005

9873900201 alaipuriatesthouse44@gmail.com

Scope List

Reset

40 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

IS 398 : Part 4 (1994)

Aluminium conductors for overhead transmission purposes: Part 4 aluminium alloy stranded conductors (Aluminium - Magnesium - Silicon Type) - Specification (Third Revision)

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1(Freedom from Defects)	-	100	For 22, 34, 55, 80,100 Rs. 10,000/- each 125, 148, 173, 200 525, 570, 604, 642, 695,767 sq.mm Rs. 15,500/- each
7.1 Table-1(Dimensional measurement of wires)	-	500	-
7.2.2 Table-2, Table-4(Calculated resistance of Stranded Conductor)	-	500	-
8.1(Joints in wires-Conductors Containing Seven Wires)	-	100	-
8.2(Joints in wires-Conductors Containing More Than Seven Wires)	-	100	-
9.1(Stranding)	-	200	-
9.2 Table 3(Lay Ratio of stranded conductors)	-	100	-
9.3(Direction of Lay)	-	200	-
9.4(Multiple layers of wires)	-	400	-
11(Packing and Marking)	-	100	-
12.2 Table 1(Breaking Load Test- Before Stranding)	-	500	-
12.2 Table 1(Breaking Load Test- After Stranding)	-	500	-
12.3 Table 1(Elongation Test- Before Stranding)	-	500	-
12.3 Table 1(Elongation Test- After Stranding)	-	500	-
12.4 Table 1(Resistance of Aluminium wire)	-	200	-
9.2(Lay Ratio 24 wire layer)	-	200	-
9.2(Lay Ratio 18 wire layer)	-	500	-
9.2(Lay Ratio 12 wire layer)	-	300	-
9.2(Lay Ratio 3/6 wire layer)	-	300	-
7.2.1(Sizes)	-	200	-
Cl-7.2 (7.2.1, 7.2.2), Table-2(Stranding and Wire Dia)	-	500	-
Cl- 7.2 (7.2.1, 7.2.2), Table-2(Approx Overall Dia)	-	500	-
Cl. 7.2 (7.2.1, 7.2.2), Table 2(Approx Mass)	-	500	-
Cl- 7.2 (7.2.1, 7.2.2), Table-2(Calculated Maximum Resistance at 20°C)	-	500	-
Cl- 7.2 (7.2.1, 7.2.2), Table-2(Approx Calculated Breaking Load)	-	500	-
6.1(Freedom from Defects)	-	0	-
7.1 Table-1(Dimensional measurement of wires)	-	0	-
7.2.2 Table-2, Table-4(Calculated resistance of Stranded Conductor)	-	0	-
8.1(Joints in wires-Conductors Containing Seven Wires)	-	0	-
8.2(Joints in wires-Conductors Containing More Than Seven Wires)	-	0	-
9.1(Stranding)	-	0	-
9.2 Table 3(Lay Ratio of stranded conductors)	-	0	-
9.3(Direction of Lay)	-	0	-
9.4(Multiple layers of wires)	-	0	-
11(Packing and Marking)	-	0	-
12.2 Table 1(Breaking Load Test- Before Stranding)	-	0	-
12.2 Table 1(Breaking Load Test- After Stranding)	-	0	-
12.3 Table 1(Elongation Test- Before Stranding)	-	0	-
12.3 Table 1(Elongation Test- After Stranding)	-	0	-
12.4 Table 1(Resistance of Aluminium wire)	-	0	-
9.2(Lay Ratio 24 wire layer)	-	0	-
9.2(Lay Ratio 18 wire layer)	-	0	-
9.2(Lay Ratio 12 wire layer)	-	0	-
9.2(Lay Ratio 3/6 wire layer)	-	0	-
7.2.1(Sizes)	-	0	-
Cl-7.2 (7.2.1, 7.2.2), Table-2(Stranding and Wire Dia)	-	0	-
Cl- 7.2 (7.2.1, 7.2.2), Table-2(Approx Overall Dia)	-	0	-
Cl. 7.2 (7.2.1, 7.2.2), Table 2(Approx Mass)	-	0	-
Cl- 7.2 (7.2.1, 7.2.2), Table-2(Calculated Maximum Resistance at 20°C)	-	0	-
Cl- 7.2 (7.2.1, 7.2.2), Table-2(Approx Calculated Breaking Load)	-	0	-
6.1(Freedom from Defects)	-	0	-
7.1 Table-1(Dimensional measurement of wires)	-	0	-
7.2.2 Table-2, Table-4(Calculated resistance of Stranded Conductor)	-	0	-
8.1(Joints in wires-Conductors Containing Seven Wires)	-	0	-
8.2(Joints in wires-Conductors Containing More Than Seven Wires)	-	0	-
9.1(Stranding)	-	0	-
9.2 Table 3(Lay Ratio of stranded conductors)	-	0	-
9.3(Direction of Lay)	-	0	-
9.4(Multiple layers of wires)	-	0	-
11(Packing and Marking)	-	0	-
12.2 Table 1(Breaking Load Test- Before Stranding)	-	0	-
12.2 Table 1(Breaking Load Test- After Stranding)	-	0	-
12.3 Table 1(Elongation Test- Before Stranding)	-	0	-
12.3 Table 1(Elongation Test- After Stranding)	-	0	-
12.4 Table 1(Resistance of Aluminium wire)	-	0	-
9.2(Lay Ratio 24 wire layer)	-	0	-
9.2(Lay Ratio 18 wire layer)	-	0	-
9.2(Lay Ratio 12 wire layer)	-	0	-
9.2(Lay Ratio 3/6 wire layer)	-	0	-
7.2.1(Sizes)	-	0	-
Cl-7.2 (7.2.1, 7.2.2), Table-2(Stranding and Wire Dia)	-	0	-
Cl- 7.2 (7.2.1, 7.2.2), Table-2(Approx Overall Dia)	-	0	-
Cl. 7.2 (7.2.1, 7.2.2), Table 2(Approx Mass)	-	0	-
Cl- 7.2 (7.2.1, 7.2.2), Table-2(Calculated Maximum Resistance at 20°C)	-	0	-
Cl- 7.2 (7.2.1, 7.2.2), Table-2(Approx Calculated Breaking Load)	-	0	-

03 Oct, 2027

-
Incuded w.e.f. 14.10.2025

IS 3854 (2023)

Switches for Domestic and Similar Purposes - Specification (Third Revision)

UP TO AND INCLUDING 32A

19800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4(General Requirements)	-	20	-
Cl-5(General notes on tests)	-	20	-
Cl-6(Rating)	-	50	-
Cl-7(Classification)	-	50	-
Cl-8(Marking)	-	200	-
Cl-9(Checking of dimensions)	-	200	-
Cl-10.1, 10.2(Prevention of Access to Live Parts)	-	300	-
Cl-10.3(Requirements for Accessible Metal Parts)	-	150	-
Cl-10.4(Requirements for Insulation of the Mechanism)	-	250	-
Cl. 10.5(Requirements for Insulation of the Mechanism with Respect to the Surrounding Environment)	-	250	-
Cl-10.6(Requirements for Switches Operated Indirectly)	-	250	-
Cl-10.7(Requirements for Switches with Replaceable Pull Cord)	-	250	-
Cl-11(Provision for earthing)	-	300	-
Cl-12(Terminals)	-	200	-
Cl-13(Constructional requirements)	-	200	-
Cl-14(Mechanism)	-	250	-
Cl-15.1(Resistance to Ageing)	-	500	-
Cl-15.3(Resistance to Humidity)	-	1000	-
Cl-16.1(General)	-	200	-
Cl-16.2(Test for Measuring the Insulation Resistance)	-	150	-
Cl-16.3(Electric Strength Test)	-	1000	-
Cl-17(Temperature rise)	-	500	-
Cl-18(Making and breaking capacity)	-	2000	-
Cl-19(Normal operation)	-	2000	-
Cl-20(Mechanical strength)	-	200	-
Cl-21(Resistance to heat)	-	1000	-
Cl-22(Screws, current carrying parts and connections)	-	200	-
Cl-23(Creepage distances, clearances and distance through sealing compound)	-	250	-
Cl-24.1(Resistance to abnormal heat and fire)	-	250	-
Cl-24.2(Resistance to tracking)	-	250	-
Cl-25(Resistance to rusting)	-	250	-
19.1(Test for Switches Intended for Inductive Loads)	-	500	-
19.2(Test for Switches Intended for Externally Ballasted Lamp Loads)	-	500	-
19.3(Test for Switches Intended for Self-ballasted Lamp Loads)	-	3000	-
13.5(Attachment of knobs)	-	200	-
12.3.11(Table 11)(Test Current for the Verification of Electrical and Thermal Stresses in Normal Use of Screwless Terminals)	-	250	-
12.3.12(Table 13)(Deflection Test Forces)	-	230	-
Cl-4(General Requirements)	-	0	-
Cl-5(General notes on tests)	-	0	-
Cl-6(Rating)	-	0	-
Cl-7(Classification)	-	0	-
Cl-8(Marking)	-	0	-
Cl-9(Checking of dimensions)	-	0	-
Cl-10.1, 10.2(Prevention of Access to Live Parts)	-	0	-
Cl-10.3(Requirements for Accessible Metal Parts)	-	0	-
Cl-10.4(Requirements for Insulation of the Mechanism)	-	0	-
Cl. 10.5(Requirements for Insulation of the Mechanism with Respect to the Surrounding Environment)	-	0	-
Cl-10.6(Requirements for Switches Operated Indirectly)	-	0	-
Cl-10.7(Requirements for Switches with Replaceable Pull Cord)	-	0	-
Cl-11(Provision for earthing)	-	0	-
Cl-12(Terminals)	-	0	-
Cl-13(Constructional requirements)	-	0	-
Cl-14(Mechanism)	-	0	-
Cl-15.1(Resistance to Ageing)	-	0	-
Cl-15.3(Resistance to Humidity)	-	0	-
Cl-16.1(General)	-	0	-
Cl-16.2(Test for Measuring the Insulation Resistance)	-	0	-
Cl-16.3(Electric Strength Test)	-	0	-
Cl-17(Temperature rise)	-	0	-
Cl-18(Making and breaking capacity)	-	0	-
Cl-19(Normal operation)	-	0	-
Cl-20(Mechanical strength)	-	0	-
Cl-21(Resistance to heat)	-	0	-
Cl-22(Screws, current carrying parts and connections)	-	0	-
Cl-23(Creepage distances, clearances and distance through sealing compound)	-	0	-
Cl-24.1(Resistance to abnormal heat and fire)	-	0	-
Cl-24.2(Resistance to tracking)	-	0	-
Cl-25(Resistance to rusting)	-	0	-
19.1(Test for Switches Intended for Inductive Loads)	-	0	-
19.2(Test for Switches Intended for Externally Ballasted Lamp Loads)	-	0	-
19.3(Test for Switches Intended for Self-ballasted Lamp Loads)	-	0	-
12.3.11(Table 11)(Test Current for the Verification of Electrical and Thermal Stresses in Normal Use of Screwless Terminals)	-	0	-
12.3.12(Table 13)(Deflection Test Forces)	-	0	-
13.5(Attachment of knobs)	-	0	-

03 Oct, 2027

-
Included w.e.f 10.10.2025 Exclusion: Cl-15.2 (Protection Provided by Enclosures of Switches)

IS 302 : Part 2 : Sec 202 (1992)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 202 electric stoves

14500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Classification- IS 302-1 )	-	200	-
6(Classification- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.3(Marking- IS 302-1)	-	0	-
7.4(Marking- IS 302-1)	-	0	-
7.6(Marking- IS 302-1)	-	0	-
7.11(Marking- IS 302-1)	-	0	-
7.12(Marking- IS 302-1)	-	0	-
7.13(Marking- IS 302-1)	-	0	-
7.14(Marking- IS 302-1)	-	0	-
7.15(Marking- IS 302-1)	-	0	-
7.101(Marking)	-	0	-
8( Protection Against Electric Shock, IS 302-1)	-	500	-
10(Power Input and Current, IS 302-1)	-	1000	-
11(Heating, IS 302-1)	-	1000	-
11(Heating, IS 302-1)	-	0	-
11(Heating, IS 302-1)	-	0	-
11(Heating, IS 302-1)	-	0	-
11(Heating, IS 302-1)	-	0	-
11(Heating, IS 302-1)	-	0	-
11(Heating, IS 302-1)	-	0	-
12(Operation under overload conditions of appliances with heating elements, IS 302-2-202: 1992)	-	500	-
13(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	500	-
13(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	0	-
15.1(Moisture Resistance, IS 302-1)	-	1000	-
15.3(Moisture Resistance, IS 302-1)	-	500	-
16(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	500	-
16(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	0	-
19.2(Abnormal Operation, IS 302-1)	-	1000	-
19.2(Abnormal Operation, IS 302-1)	-	500	-
19.3(Abnormal Operation, IS 302-1)	-	1000	-
19.3(Abnormal Operation, IS 302-1)	-	0	-
20.1(Stability & Mechanical Hazards, IS 302-1)	-	500	-
21.1(Mechanical Strength, IS 302-1 & IS 302-2-202)	-	500	-
22(Construction, IS 302-1)	-	1000	-
22.101(Construction)	-	0	-
22.102(Construction)	-	0	-
22.103(Construction)	-	0	-
22.104(Construction)	-	0	-
22.105(Construction)	-	0	-
22.105.1(Construction)	-	0	-
22.105.2(Construction)	-	0	-
22.106(Construction)	-	0	-
22.107(Construction)	-	0	-
11.107.1(Construction)	-	0	-
23.1(Internal Wiring, IS 302-1)	-	500	-
23.2(Internal Wiring, IS 302-1)	-	0	-
23.8(Internal Wiring, IS 302-1)	-	500	-
23.9(Internal Wiring, IS 302-1)	-	0	-
23.10(Internal Wiring, IS 302-1)	-	0	-
24.1(Components, IS 302-1)	-	500	-
24.2(Components, IS 302-1)	-	0	-
24.101(Components)	-	0	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.4(Supply Connection and External Flexible Cords)	-	0	-
25.5(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.6(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
26.9(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.11(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.12(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.16(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.17(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.18(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.19(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.2(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.21(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.22(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
26(Terminals for External Conductors, IS 302-1)	-	500	-
27.1(Provision for Earthing, IS 302-1)	-	500	-
27.2(Provision for Earthing, IS 302-1)	-	0	-
27.3(Provision for Earthing, IS 302-1)	-	0	-
27.4(Provision for Earthing, IS 302-1)	-	0	-
27.5(Provision for Earthing, IS 302-1)	-	0	-
28(Screws & Connections, IS 302-1)	-	500	-
29.1(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	500	-
29.2(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	0	0
30.1(Resistance to Heat, Fire & Tracking, IS 302-1)	-	500	-
30.2(Resistance to Heat, Fire & Tracking, IS 302-1)	-	500	-
31(Resistance of Rusting, IS 302-1)	-	500	-

03 Oct, 2027

-
Included w.e.f 04.08.2025 Exclusion: Cl 19.11.4.1-19.11.4.7(EMI/EMC)

IS 302 : Part 2 : Sec 80 (2017)

Household and similar electrical appliances - Safety: Part 2 - 80 particular requirements for fans (First Revision)

14900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
31.0(Resistance To Rusting)	-	1000	-
30.0(Resistance To Heat and Fire)	-	1000	-
29.0(Creepage Distances and Clearances)	-	300	-
28.0(Screws and Connections)	-	300	-
27.0(Provision For Earthing)	-	500	-
26.0(Terminals for external conductors)	-	500	-
25.0(Supply Connection and External Flexible Cords)	-	500	-
24.0(Components)	-	300	-
23.0(Internal Wiring)	-	500	-
22.0(Construction)	-	300	-
21.0(Mechanical Strength)	-	300	-
20.0(Stability and mechanical hazards)	-	200	-
19.0(Abnormal Operation)	-	1500	-
17.0(Overload Protection of transformer and associated circuit)	-	200	-
16.0(Leakage current and Electric strength (After Humidity (Environmental) Treatment))	-	500	-
15.0(Moisture resistance)	-	1500	-
14.0(Transient Overvoltage)	-	500	-
13.0(Leakage Current and electric strength at operating temperature)	-	500	-
11.0(Heating)	-	1500	-
10.0(Input and Current)	-	1500	-
8.0(Protection against access to live parts)	-	1000	-
7.0(Classification)	-	200	-
6.0(Marking and Instructions)	-	300	-
4(GENERAL REQUIREMENT)	-	200	-
5(GENERAL CONDITIONS FOR THE TESTS)	-	200	-

03 Oct, 2027

-
Included w.e.f.31.07.2025 Exclusion Cl 19.11.4.1 to Cl 19.11.4.7(EMI/EMC) Cl 32 (Radiation, Toxicity and similar hazards)

IS 4250 (2025)

Electric Food-Mixers (Liquidizers and Grinders) and Centrifugal Juicers ï¿½ Specification ( Second Revision )

30000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4(General Requirements)	-	500	-
Cl-5(General Conditions for the tests)	-	500	-
Cl-6(Classification)	-	500	-
Cl-7(Marking)	-	1000	-
Cl-8(Safety Requirements)	-	2000	-
Cl-9(Endurance fpr motor and base assembly)	-	5000	-
Cl-10.2("Grinding Coffee (for Machines that Have a Dry Grinding Arrangement)")	-	1500	-
Cl-10.3(Whisking Egg Whites (for Machines that have Whisking Egg Arrangement))	-	1500	-
Cl-10.4(Idli Batter)	-	1500	-
Cl-10.5(Operational Tests for Juicers)	-	1500	-
Cl-11(Temperature Withstand Test for Bowl)	-	1000	-
Cl-12.1(Test for Switches)	-	3000	-
Cl-13(Strength of Assembly)	-	1000	-
Cl-14.2, 14.3 Table-2 (i)(Protection against access to live parts)	-	1000	-
Cl-14.2, Table-2 (ii)(Power input and current)	-	2000	-
Cl-14.2, 14.3 Table-2 (iii)(Leakage current and electric strength at operating temperature)	-	2000	-
Cl-14.2, Table-2 (iv)(Moisture resistance)	-	2000	-
Cl-14.2, Table-2 (v)(Leakage current and electric strength)	-	2000	-
Cl-14.2, 14.3 Table-2 (vi)(Provision for earthing)	-	2000	-

03 Oct, 2027

-
-

IS 14927 : Part 2 : Sec 1 (2023)

Cable trunking systems and cable ducting Systems for electrical installations Part 2-1: particular requirements cable trunking systems and cable Ducting systems intended for mounting on walls and ceilings first revision

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.9.1(Sharp edges)	-	500	-
Cl.9.2(Apparatus mounting)	-	500	-
Cl.9.3(Means for protective separation and/or retention)	-	1000	-
Cl.9.4(Mechanical connections)	-	1000	-
Cl.9.5(Accessible conductive parts)	-	1000	-
Cl.9.6(Equipotential bonding)	-	500	-
Cl.9.7(Access to live parts)	-	1000	-
Cl.9.8(Inlet openings)	-	500	-
Cl.9.9(Membranes)	-	1000	-
Cl.9.10(Cable restrainer)	-	1000	-
Cl.9.11(Cable anchorage)	-	1000	-
Cl. 9.101(Assembling)	-	1000	-
Cl. 9.102(Contact between liquids and insulated conductors and live parts)	-	1000	-
Cl.10.1(Linear deflection test)	-	1000	-
Cl.10.1(Mechanical strength)	-	1000	-
Cl.10.2(Cable support test)	-	1000	-
Cl.10.3(Impact test)	-	1000	-
Cl.10.5(External load test)	-	500	-
Cl.10.6(System access cover retention)	-	500	-
Cl. 10.101(Compression test for CDS)	-	1500	-
Cl.11.1(Electrical continuity)	-	1000	-
Cl.11.2(Electrical insulation)	-	1000	-
Cl.12(Thermal properties)	-	1000	-
Cl.13(Fire hazard)	-	2000	-
Cl.14(External influences)	-	2000	-

03 Oct, 2027

-
Included w.e.f 18.08.2025 Exclusion: Cl. 15 (Electromagnetic compatibility)

IS 3419 (1988)

Specification for fittings for rigid non - Metallic (Second Revision)

----

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8 & 5(Visual Examination -IS:3419)	-	500	-
6.2 & 9.1- Table-1, ii(Inside Diameter of Collar for Slip type cuplers -IS:3419)	-	500	-
6.2 & 9.1- Table-1, iii(Inside Diameter of Ridge for Slip type cuplers -IS:3419)	-	0	-
6.2 & 9.1- Table-1, iv(Minimum overall length for Slip type cuplers -IS:3419)	-	0	-
6.2 & 9.1- Table-1, v(Minimum wall thickness for Slip type cuplers -IS:3419)	-	0	-
6.2 & 9.1- Table-2, ii(Inside Diameter of Collar for Socketed type cuplers -IS:3419)	-	0	-
6.2 & 9.1- Table-2, iii(Inside Diameter of Ridge for Socketed type cuplers -IS:3419)	-	0	-
6.2 & 9.1- Table-2, iv(Minimum overall length (a) for Socketed type cuplers -IS:3419)	-	0	-
6.2 & 9.1- Table-2, v(Minimum overall length (l) for Socketed type cuplers -IS:3419)	-	0	-
6.2 & 9.1- Table-2, vi(Minimum wall thickness for Socketed type cuplers -IS:3419)	-	0	-
6.2 & 9.1- Table-3, ii(Inside Diameter of Collar(d6) for Clamp type cuplers -IS:3419)	-	0	-
6.2 & 9.1- Table-3, iii(Inside Diameter of Collar (d5) for Clamp type cuplers -IS:3419)	-	0	-
6.2 & 9.1- Table-3, iv(Inside Diameter of Ridge for Clamp type cuplers -IS:3419)	-	0	-
6.2 & 9.1- Table-3, iv(Minimum length for Clamp type cuplers -IS:3419)	-	0	-
6.2 & 9.1- Table-3, vi(Minimum wall thickness for Clamp type cuplers -IS:3419)	-	0	-
6.2 & 9.1- Table-4, ii(Outside Dameter of Normal type bend -IS:3419)	-	0	-
6.2 & 9.1- Table-4, iii(Minimum Inside Diameter of Normal Type Bend -IS:3419)	-	0	-
6.2 & 9.1- Table-4, iv(Radious(R) of Normal Type Bend -IS:3419)	-	0	-
6.2 & 9.1- Table-4, v(Length (l1) of Normal Type Bend -IS:3419)	-	0	-
6.2 & 9.1- Table-5, ii(Outside Dameter of Slip type cupling bend -IS:3419)	-	0	-
6.2 & 9.1- Table-5, iii(Minimum Inside Diameter of Slip type cupling bend -IS:3419)	-	0	-
6.2 & 9.1- Table-5, iv(Inside Diameter of collar for Slip type cupling bend -IS:3419)	-	0	-
6.2 & 9.1- Table-5, v(R- for Slip type cupling bend -IS:3419)	-	0	-
6.2 & 9.1- Table-5, vi(Y- for Slip type cupling bend -IS:3419)	-	0	-
6.2 & 9.1- Table-5, vii(l2- for Slip type cupling bend -IS:3419)	-	0	-
6.2 & 9.1- Table-6, ii(Inside Diameter of collar for Normal type Elbows -IS:3419)	-	0	-
6.2 & 9.1- Table-6, iii(Length (l) of Normal Type Elbows -IS:3419)	-	0	-
6.2 & 9.1- Table-6, iv(Radious(r) of Normal Type Elbows -IS:3419)	-	0	-
6.2 & 9.1- Table-6, v(Minimum wall thicknes of Elbows -IS:3419)	-	0	-
6.2 & 9.1- Table-7, ii(Inside Diameter of Collear for Normal type Tees -IS:3419)	-	0	-
6.2 & 9.1- Table-7, iii(Length (l) of Normal type Tees -IS:3419)	-	0	-
6.2 & 9.1- Table-7, iv(Radious(r) of Normal type Tees -IS:3419)	-	0	-
6.2 & 9.1- Table-7, v( Minimum wall thicknes of Normal type Tees -IS:3419)	-	0	-
6.2 & 9.1- Table-8, ii(Inside Diameter of Collear for socketed type Tees - IS:3419)	-	0	-
6.2 & 9.1- Table-8, iii(a - of socketed type Tees -IS:3419)	-	0	-
6.2 & 9.1- Table-8, iv(l - of socketed type Tees -IS:3419)	-	0	-
6.2 & 9.1- Table-8, v(Minimum wall thicknes of socketed type Tees -IS:3419)	-	0	-
6.2 & 9.1- Table-9, ii(B - of spout Type Circular Boxes -IS:3419)	-	0	-
6.2 & 9.1- Table-9, iii(C - of spout Type Circular Boxes -IS:3419)	-	0	-
6.2 & 9.1- Table-9, iv(D - of spout Type Circular Boxes -IS:3419)	-	0	-
6.2 & 9.1- Table-9, v(E - of spout Type Circular Boxes -IS:3419)	-	0	-
6.2 & 9.1- Table-9, vi(F(Max) - of spout Type Circular Boxes -IS:3419)	-	0	-
6.2 & 9.1- Table-9, vii(F(Min) - of spout Type Circular Boxes -IS:3419)	-	0	-
6.2 & 9.1- Table-9, viii(G - of spout Type Circular Boxes -IS:3419)	-	0	-
6.2 & 9.1- Table-9, ix(t - of spout Type Circular Boxes -IS:3419)	-	0	-
10(Resistance to Heat -IS:3419)	-	1000	-
11(Resistance to Burning - IS 3419)	-	1000	-
12(Moisture Absorption - IS 3419)	-	500	-
13.2 &13.3(Resistance to chemival action in Acid solution - IS 3419)	-	1000	-
13.2 &13.3(Resistance to chemival action in Alkaline solution - IS 3419)	-	1000	-
14.1(Copper Test - IS 3419)	-	1000	-
15, 15.3(Resistance to Oil - IS 3419)	-	500	-
15,15.4(Resistance to Oil - IS 3419)	-	500	-
16- Appendix-A(Resistance to Impact -IS 3419)	-	500	-
17.2(Electric Strength - IS 3419)	-	500	-
17.3(Insulation Resistance - IS 3419)	-	500	-
Cl.7.1(Marking)	-	500	-
Cl.7.1(Construction)	-	500	-
Cl. 5(Construction)	-	0	-
Cl. 5(Construction)	-	0	-
Cl.5.3(Construction)	-	500	-
Cl.5.3(Construction)	-	0	-
(Cl.6) Table 9(Dimensions A)	-	500	-
(Cl.6) Table 9(Dimensions B)	-	0	-
(Cl.6) Table 9(Dimensions C)	-	0	-
(Cl.6) Table 9(Dimensions D)	-	0	-
(Cl.6) Table 9(Dimensions E)	-	0	-
(Cl.6) Table 9(Dimensions F)	-	0	-
(Cl.6) Table 9(Dimensions G)	-	0	-
(Cl.6) Table 9(Dimensions t)	-	0	-
Cl. 10(Resistance to Heat)	-	0	0
Cl. 11(Resistance to Burning)	-	0	-
Cl. 12(Moisture Absorption Test)	-	0	-
Cl.13(Resistance to Chemical Action)	-	0	-
Cl.14(Copper Test)	-	0	-
Cl. 15(Resistance to Oil)	-	0	-
Cl. 15(Resistance to Oil)	-	0	-

03 Oct, 2027

-
Included w.e.f.29.07.2025

IS 9537 : Part 3 (1983)

Specification for conduits for electrical installations: Part 3 rigid plain conduits of insulating meterials

----

4500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1(Marking)	-	100	-
6.2(Durability of Marking as per 6.4 of IS: 9537 (Part 1)-1980)	-	200	-
6.3(Standard Mark on Conduit)	-	100	-
7.1.1(Maximum and minimum outside diameter of socket)	-	100	-
7.1.1 Table-2(Length of Socket end)	-	100	-
7.1.2(Maximum and minimum outside diameter of conduit)	-	200	-
7.2(Minimum inside diameter of conduit)	-	200	-
7.3(Length of conduit)	-	100	-
7.4(Unifomity of The wall Thickness)	-	100	-
8.1(Construction as per clause 8 of IS: 9537 (Part 1)-1980)	-	100	-
9.2(Bending Test i) At Room Temp ii) At Low Temp (-5 ±2°C))	-	300	-
9.3(Compression Test as per caluse 9.3 of IS: 9537 (Part 1)-1980)	-	300	-
9.4(Impact Test as per clause 9.4 of IS: 9537 (Part 1)-1980)	-	500	-
9.5(Collapse Test as per clause 9.5 of IS: 9537 (Part 1)-1980)	-	300	-
10(Resistance to Heat -Ball presure test)	-	300	-
11(Resistance to burning as per clause 11 of IS: 9537 (Part 1)-1980)	-	500	-
12(Electrical Characteristics-Test for electric strength as per clause 12.1.1 of IS: 9537 (Part 1)-1980)	-	500	-
12(Electrical Characteristics-Insulation resistance test as per clause 12.1.2 of IS: 9537 (Part 1)-1980)	-	500	-
13(Tests for external influence as per clause 13 of IS: 9537 (Part 1)-1980)	-	200	-
13(Tests for external influence as per clause 13 of IS: 9537 (Part 1)-1980)	-	200	-
12(3 Characteristics-Insulation resistance test as per clause 12.1.2 of IS: 9537 (Part 1)-1980)	-	500	-
12(3 Characteristics-Test for electric strength as per clause 12.1.1 of IS: 9537 (Part 1)-1980)	-	500	-
11.0(Resistance to burning as per clause 11 of IS: 9537 (Part 1)-1980)	-	500	-
10.0(Resistance to Heat -Ball presure test)	-	300	-
9.5 Fig.5(Collapse Test as per clause 9.5 of IS: 9537 (Part 1)-1980)	-	300	-
9.4(Impact Test as per clause 9.4 of IS: 9537 (Part 1)-1980)	-	500	-
9.3(Compression Test (after removal of force) as per caluse 9.3.3 of IS: 9537 (Part 1)-1980)	-	300	-
9.3(Compression Test at Full force applied (On load))	-	300	-
9.2(Bending Test At Low Temp (-5 ±2°C))	-	300	-
9.2(Bending Test At Room Temp)	-	300	-
8.1(Construction as per clause 8 of IS: 9537 (Part 1)-1980)	-	100	-
7.4(Unifomity of The wall Thickness)	-	100	-
7.3(Length of conduit)	-	100	-
7.2 Fig.3(Minimum inside diameter of conduit)	-	200	-
7.1.2 Fig.2(Minimum outside diameter of conduit)	-	200	-
7.1.2 Fig.1(Maximum outside diameter of conduit)	-	200	-
7.1.1 Table-2(Length of Socket end)	-	100	-
7.1.1 Fig.8(Maximum inside diameter of socket)	-	100	-
7.1.1 Fig.7(Maximum outside diameter of socket)	-	100	-
6.3(Standard Mark on Conduit)	-	100	-
6.2(Durability of Marking as per 6.4 of IS: 9537 (Part 1)-1980)	-	200	-
6.1 - d(Marking)	-	100	-
6.1 - c(Marking)	-	100	-
6.1 - b(Marking)	-	100	-
6.1 - a(Marking)	-	100	-

03 Oct, 2027

-
Included w.e.f.17.07.2025 Exclusion 13 (Tests for external influence as per clause 13 of IS: 9537 (Part 1)-1980)

IS 302 : Part 1 (2024)

Household and Similar Electrical Appliances â Safety Part 1 General Requirements (Seventh Revision)

45000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
12(Charging of metal-ion batteries)	-	1000	-
6(Classification- IS 302-1)	-	500	-
5(General conditions for the tests)	-	500	-
11.8(Temperature rise)	-	1000	-
11.7(Duration corresponding)	-	1000	-
11.6(Combined appliances)	-	500	-
11.5(Motor-operated appliances)	-	1000	-
11.4(Heating appliances)	-	1000	-
8.1.5(Live parts of built-in appliances)	-	500	-
18(Endurance)	-	0	-
17(Overload protection of transformers and associated circuits)	-	1000	-
16(Leakage current and electric strength)	-	1000	-
4(General requirement)	-	500	-
31(Resistance to Rusting)	-	500	-
30.2(Needle Flame Test)	-	1000	-
30.2(Glow Wire Test)	-	1000	-
30.1(Ball pressure test)	-	500	-
29(clearance, creepage distances and solid insulation)	-	1000	-
28(Screw test and connections)	-	500	-
27.1(Provision for Earthing, IS 302-1)	-	1000	-
26(Terminals for external conductors)	-	500	-
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
24(Components)	-	500	-
23.1(Internal Wiring, IS 302-1)	-	500	-
22.1(Construction, IS 302-1)	-	500	-
21.1(Mechanical Strength, IS 302-1)	-	1000	-
20.1(Stability & Mechanical Hazards, IS 302-1)	-	500	-
19(Abnormal Operation)	-	1000	-
18(Endurance)	-	0	-
17(Over Load Protection of Transformers and associated circuits)	-	1000	-
16.3(Electric Strength (after clause 15 and 16.2))	-	1000	-
16.2(Leakage Current (after Clause 15))	-	500	-
16.1(General)	-	500	-
16.0(General)	-	1000	-
15.3(Humidity Test)	-	500	-
15.2(Spillage Test)	-	500	-
15.1(Ingress Protection test other than IPX0 (IP test))	-	500	-
15.0(Moisture resistance)	-	1000	-
14(Transient Over Voltages)	-	1000	-
13.3(Electric Strength at operating temperature)	-	1000	-
13.2(Leakage current at operating temperature)	-	500	-
13(Leakage current and electric strength at operating temperature)	-	1000	-
11.3(Heating)	-	1000	-
11.2(General)	-	500	-
11.1(General)	-	500	-
10.2(Current input)	-	500	-
10.1(Power input)	-	1000	-
9(Starting of motor operation test requirements and tests)	-	1000	-
8.1.4(Protection against live parts against protective impedance)	-	500	-
8.1.3(Protection against live parts in visible glowing heating elements)	-	500	-
8.1.2(Protection against live parts in openings)	-	500	-
8.1.1(Protection against live parts in all positions)	-	1000	-
7(Marking and instructions)	-	500	-
A.2(Earth continuity test)	-	1000	-
Annex C(Ageing test on motors)	-	1000	-
Annex D(Thermal motor protectors)	-	1000	-
15.2(Moisture resistance)	-	500	-
19.17(Abnormal Operation, IS 302-1)	-	1000	-
20.2(Stability & Mechanical Hazards, IS 302-1)	-	1000	-
21.2(Mechanical Strength, IS 302-1)	-	500	-
21.3(Mechanical Strength, IS 302-1)	-	1000	-
22.5(Construction)	-	500	-
22.6(Construction, IS 302-1)	-	500	-
22.11(Construction, IS 302-1)	-	500	-
22.16(Construction)	-	500	-
22.32(Construction, IS 302-1)	-	500	-
22.42(Construction)	-	500	-
23.3(Internal Wiring, IS 302-1)	-	1000	-
25.6(Supply connection and external flexible cords, IS 302-1)	-	1000	-
25.7(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
26.5(Terminals for external conductors)	-	500	-
27.5(Provision for Earthing, IS 302-1)	-	1000	-
28.1(Screws and connections)	-	1000	-
22.2(Construction, IS 302-1)	-	1000	-
22.3(Construction, IS 302-1)	-	1000	-
B.22.4(Construction, IS 302-1)	-	1000	-
B.22.5(Construction, IS 302-1)	-	1000	-
12(Charging of metal-ion batteries)	-	0	-
6(Classification- IS 302-1)	-	0	-
5(General conditions for the tests)	-	0	-
11.8(Temperature rise)	-	0	-
11.7(Duration corresponding)	-	0	-
11.6(Combined appliances)	-	0	-
11.5(Motor-operated appliances)	-	0	-
11.4(Heating appliances)	-	0	-
8.1.5(Live parts of built-in appliances)	-	0	-
18(Endurance)	-	0	-
17(Overload protection of transformers and associated circuits)	-	0	-
16(Leakage current and electric strength)	-	0	-
4(General requirement)	-	0	-
31(Resistance to Rusting)	-	0	-
30.2(Needle Flame Test)	-	0	-
30.2(Glow Wire Test)	-	0	-
30.1(Ball pressure test)	-	0	-
29(clearance, creepage distances and solid insulation)	-	0	-
28(Screw test and connections)	-	0	-
27.1(Provision for Earthing, IS 302-1)	-	0	-
26(Terminals for external conductors)	-	0	-
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
24(Components)	-	0	-
23.1(Internal Wiring, IS 302-1)	-	0	-
22.1(Construction, IS 302-1)	-	0	-
21.1(Mechanical Strength, IS 302-1)	-	0	-
20.1(Stability & Mechanical Hazards, IS 302-1)	-	0	-
19(Abnormal Operation)	-	0	-
18(Endurance)	-	0	-
17(Over Load Protection of Transformers and associated circuits)	-	0	-
16.3(Electric Strength (after clause 15 and 16.2))	-	0	-
16.2(Leakage Current (after Clause 15))	-	0	-
16.1(General)	-	0	-
16.0(General)	-	0	-
15.3(Humidity Test)	-	0	-
15.2(Spillage Test)	-	0	-
15.1(Ingress Protection test other than IPX0 (IP test))	-	0	-
15.0(Moisture resistance)	-	0	-
14(Transient Over Voltages)	-	0	-
13.3(Electric Strength at operating temperature)	-	0	-
13.2(Leakage current at operating temperature)	-	0	-
13(Leakage current and electric strength at operating temperature)	-	0	-
11.3(Heating)	-	0	-
11.2(General)	-	0	-
11.1(General)	-	0	-
10.2(Current input)	-	0	-
10.1(Power input)	-	0	-
9(Starting of motor operation test requirements and tests)	-	0	-
8.1.4(Protection against live parts against protective impedance)	-	0	-
8.1.3(Protection against live parts in visible glowing heating elements)	-	0	-
8.1.2(Protection against live parts in openings)	-	0	-
8.1.1(Protection against live parts in all positions)	-	0	-
7(Marking and instructions)	-	0	-
A.2(Earth continuity test)	-	0	-
Annex C(Ageing test on motors)	-	0	-
Annex D(Thermal motor protectors)	-	0	-
15.2(Moisture resistance)	-	0	-
19.17(Abnormal Operation, IS 302-1)	-	0	-
20.2(Stability & Mechanical Hazards, IS 302-1)	-	0	-
21.2(Mechanical Strength, IS 302-1)	-	0	-
21.3(Mechanical Strength, IS 302-1)	-	0	-
22.5(Construction)	-	0	-
22.6(Construction, IS 302-1)	-	0	-
22.11(Construction, IS 302-1)	-	0	-
22.16(Construction)	-	0	-
22.32(Construction, IS 302-1)	-	0	-
22.42(Construction)	-	0	-
23.3(Internal Wiring, IS 302-1)	-	0	-
25.6(Supply connection and external flexible cords, IS 302-1)	-	0	-
25.7(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
26.5(Terminals for external conductors)	-	0	-
27.5(Provision for Earthing, IS 302-1)	-	0	-
28.1(Screws and connections)	-	0	-
22.2(Construction, IS 302-1)	-	0	-
22.3(Construction, IS 302-1)	-	0	-
B.22.4(Construction, IS 302-1)	-	0	-
B.22.5(Construction, IS 302-1)	-	0	-
12(Charging of metal-ion batteries)	-	0	-
6(Classification- IS 302-1)	-	0	-
5(General conditions for the tests)	-	0	-
11.8(Temperature rise)	-	0	-
11.7(Duration corresponding)	-	0	-
11.6(Combined appliances)	-	0	-
11.5(Motor-operated appliances)	-	0	-
11.4(Heating appliances)	-	0	-
8.1.5(Live parts of built-in appliances)	-	0	-
18(Endurance)	-	0	-
17(Overload protection of transformers and associated circuits)	-	0	-
16(Leakage current and electric strength)	-	0	-
4(General requirement)	-	0	-
31(Resistance to Rusting)	-	0	-
30.2(Needle Flame Test)	-	0	-
30.2(Glow Wire Test)	-	0	-
30.1(Ball pressure test)	-	0	-
29(clearance, creepage distances and solid insulation)	-	0	-
28(Screw test and connections)	-	0	-
27.1(Provision for Earthing, IS 302-1)	-	0	-
26(Terminals for external conductors)	-	0	-
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
23.1(Internal Wiring, IS 302-1)	-	0	-
22.1(Construction, IS 302-1)	-	0	-
21.1(Mechanical Strength, IS 302-1)	-	0	-
20.1(Stability & Mechanical Hazards, IS 302-1)	-	0	-
19(Abnormal Operation)	-	0	-
18(Endurance)	-	0	-
17(Over Load Protection of Transformers and associated circuits)	-	0	-
16.3(Electric Strength (after clause 15 and 16.2))	-	0	-
16.2(Leakage Current (after Clause 15))	-	0	-
16.1(General)	-	0	-
16.0(General)	-	0	-
15.3(Humidity Test)	-	0	-
15.1(Ingress Protection test other than IPX0 (IP test))	-	0	-
15.0(Moisture resistance)	-	0	-
14(Transient Over Voltages)	-	0	-
13.3(Electric Strength at operating temperature)	-	0	-
13.2(Leakage current at operating temperature)	-	0	-
13(Leakage current and electric strength at operating temperature)	-	0	-
11.3(Heating)	-	0	-
11.2(General)	-	0	-
11.1(General)	-	0	-
10.2(Current input)	-	0	-
10.1(Power input)	-	0	-
9(Starting of motor operation test requirements and tests)	-	0	-
8.1.4(Protection against live parts against protective impedance)	-	0	-
8.1.3(Protection against live parts in visible glowing heating elements)	-	0	-
8.1.2(Protection against live parts in openings)	-	0	-
8.1.1(Protection against live parts in all positions)	-	0	-
7(Marking and instructions)	-	0	-
A.2(Earth continuity test)	-	0	-
Annex C(Ageing test on motors)	-	0	-
Annex D(Thermal motor protectors)	-	0	-
19.17(Abnormal Operation, IS 302-1)	-	0	-
20.2(Stability & Mechanical Hazards, IS 302-1)	-	0	-
21.2(Mechanical Strength, IS 302-1)	-	0	-
21.3(Mechanical Strength, IS 302-1)	-	0	-
22.5(Construction)	-	0	-
22.6(Construction, IS 302-1)	-	0	-
22.11(Construction, IS 302-1)	-	0	-
22.16(Construction)	-	0	-
22.32(Construction, IS 302-1)	-	0	-
22.42(Construction)	-	0	-
23.3(Internal Wiring, IS 302-1)	-	0	-
25.6(Supply connection and external flexible cords, IS 302-1)	-	0	-
25.7(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
26.5(Terminals for external conductors)	-	0	-
27.5(Provision for Earthing, IS 302-1)	-	0	-
28.1(Screws and connections)	-	0	-
22.2(Construction, IS 302-1)	-	0	-
22.3(Construction, IS 302-1)	-	0	-
B.22.4(Construction, IS 302-1)	-	0	-
B.22.5(Construction, IS 302-1)	-	0	-
15.2(Spillage Test)	-	0	-
15.2(Moisture resistance)	-	0	-
12(Charging of metal-ion batteries)	-	0	-
6(Classification- IS 302-1)	-	0	-
5(General conditions for the tests)	-	0	-
11.8(Temperature rise)	-	0	-
11.7(Duration corresponding)	-	0	-
11.6(Combined appliances)	-	0	-
11.5(Motor-operated appliances)	-	0	-
11.4(Heating appliances)	-	0	-
8.1.5(Live parts of built-in appliances)	-	0	-
18(Endurance)	-	0	-
17(Overload protection of transformers and associated circuits)	-	0	-
16(Leakage current and electric strength)	-	0	-
4(General requirement)	-	0	-
31(Resistance to Rusting)	-	0	-
30.2(Needle Flame Test)	-	0	-
30.2(Glow Wire Test)	-	0	-
30.1(Ball pressure test)	-	0	-
29(clearance, creepage distances and solid insulation)	-	0	-
28(Screw test and connections)	-	0	-
27.1(Provision for Earthing, IS 302-1)	-	0	-
26(Terminals for external conductors)	-	0	-
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
23.1(Internal Wiring, IS 302-1)	-	0	-
22.1(Construction, IS 302-1)	-	0	-
21.1(Mechanical Strength, IS 302-1)	-	0	-
20.1(Stability & Mechanical Hazards, IS 302-1)	-	0	-
19(Abnormal Operation)	-	0	-
18(Endurance)	-	0	-
17(Over Load Protection of Transformers and associated circuits)	-	0	-
16.3(Electric Strength (after clause 15 and 16.2))	-	0	-
16.2(Leakage Current (after Clause 15))	-	0	-
16.1(General)	-	0	-
16.0(General)	-	0	-
15.3(Humidity Test)	-	0	-
15.1(Ingress Protection test other than IPX0 (IP test))	-	0	-
15.0(Moisture resistance)	-	0	-
14(Transient Over Voltages)	-	0	-
13.3(Electric Strength at operating temperature)	-	0	-
13.2(Leakage current at operating temperature)	-	0	-
13(Leakage current and electric strength at operating temperature)	-	0	-
11.3(Heating)	-	0	-
11.2(General)	-	0	-
11.1(General)	-	0	-
10.2(Current input)	-	0	-
10.1(Power input)	-	0	-
9(Starting of motor operation test requirements and tests)	-	0	-
8.1.4(Protection against live parts against protective impedance)	-	0	-
8.1.3(Protection against live parts in visible glowing heating elements)	-	0	-
8.1.2(Protection against live parts in openings)	-	0	-
8.1.1(Protection against live parts in all positions)	-	0	-
7(Marking and instructions)	-	0	-
A.2(Earth continuity test)	-	0	-
Annex C(Ageing test on motors)	-	0	-
Annex D(Thermal motor protectors)	-	0	-
19.17(Abnormal Operation, IS 302-1)	-	0	-
20.2(Stability & Mechanical Hazards, IS 302-1)	-	0	-
21.2(Mechanical Strength, IS 302-1)	-	0	-
21.3(Mechanical Strength, IS 302-1)	-	0	-
22.5(Construction)	-	0	-
22.6(Construction, IS 302-1)	-	0	-
22.11(Construction, IS 302-1)	-	0	-
22.16(Construction)	-	0	-
22.32(Construction, IS 302-1)	-	0	-
22.42(Construction)	-	0	-
23.3(Internal Wiring, IS 302-1)	-	0	-
25.6(Supply connection and external flexible cords, IS 302-1)	-	0	-
25.7(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
26.5(Terminals for external conductors)	-	0	-
27.5(Provision for Earthing, IS 302-1)	-	0	-
28.1(Screws and connections)	-	0	-
22.2(Construction, IS 302-1)	-	0	-
22.3(Construction, IS 302-1)	-	0	-
B.22.4(Construction, IS 302-1)	-	0	-
B.22.5(Construction, IS 302-1)	-	0	-
15.2(Spillage Test)	-	0	-
15.2(Moisture resistance)	-	0	-
12(Charging of metal-ion batteries)	-	-	-
6(Classification- IS 302-1)	-	-	-
5(General conditions for the tests)	-	-	-
11.8(Temperature rise)	-	-	-
11.7(Duration corresponding)	-	-	-
11.6(Combined appliances)	-	-	-
11.5(Motor-operated appliances)	-	-	-
11.4(Heating appliances)	-	-	-
8.1.5(Live parts of built-in appliances)	-	-	-
18(Endurance)	-	-	-
17(Overload protection of transformers and associated circuits)	-	-	-
16(Leakage current and electric strength)	-	-	-
4(General requirement)	-	-	-
31(Resistance to Rusting)	-	-	-
30.2(Needle Flame Test)	-	-	-
30.2(Glow Wire Test)	-	-	-
30.1(Ball pressure test)	-	-	-
29(clearance, creepage distances and solid insulation)	-	-	-
28(Screw test and connections)	-	-	-
27.1(Provision for Earthing, IS 302-1)	-	-	-
26(Terminals for external conductors)	-	-	-
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	-	-
23.1(Internal Wiring, IS 302-1)	-	-	-
22.1(Construction, IS 302-1)	-	-	-
21.1(Mechanical Strength, IS 302-1)	-	-	-
20.1(Stability & Mechanical Hazards, IS 302-1)	-	-	-
19(Abnormal Operation)	-	-	-
18(Endurance)	-	-	-
17(Over Load Protection of Transformers and associated circuits)	-	-	-
16.3(Electric Strength (after clause 15 and 16.2))	-	-	-
16.2(Leakage Current (after Clause 15))	-	-	-
16.1(General)	-	-	-
16.0(General)	-	-	-
15.3(Humidity Test)	-	-	-
15.1(Ingress Protection test other than IPX0 (IP test))	-	-	-
15.0(Moisture resistance)	-	-	-
14(Transient Over Voltages)	-	-	-
13.3(Electric Strength at operating temperature)	-	-	-
13.2(Leakage current at operating temperature)	-	-	-
13(Leakage current and electric strength at operating temperature)	-	-	-
11.3(Heating)	-	-	-
11.2(General)	-	-	-
11.1(General)	-	-	-
10.2(Current input)	-	-	-
10.1(Power input)	-	-	-
9(Starting of motor operation test requirements and tests)	-	-	-
8.1.4(Protection against live parts against protective impedance)	-	-	-
8.1.3(Protection against live parts in visible glowing heating elements)	-	-	-
8.1.2(Protection against live parts in openings)	-	-	-
8.1.1(Protection against live parts in all positions)	-	-	-
7(Marking and instructions)	-	-	-
A.2(Earth continuity test)	-	-	-
Annex C(Ageing test on motors)	-	-	-
Annex D(Thermal motor protectors)	-	-	-
19.17(Abnormal Operation, IS 302-1)	-	-	-
20.2(Stability & Mechanical Hazards, IS 302-1)	-	-	-
21.2(Mechanical Strength, IS 302-1)	-	-	-
21.3(Mechanical Strength, IS 302-1)	-	-	-
22.5(Construction)	-	-	-
22.6(Construction, IS 302-1)	-	-	-
22.11(Construction, IS 302-1)	-	-	-
22.16(Construction)	-	-	-
22.32(Construction, IS 302-1)	-	-	-
22.42(Construction)	-	-	-
23.3(Internal Wiring, IS 302-1)	-	-	-
25.6(Supply connection and external flexible cords, IS 302-1)	-	-	-
25.7(Supply Connection and External Flexible Cords, IS 302-1)	-	-	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	-	-
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	-	-
26.5(Terminals for external conductors)	-	-	-
27.5(Provision for Earthing, IS 302-1)	-	-	-
28.1(Screws and connections)	-	-	-
22.2(Construction, IS 302-1)	-	-	-
22.3(Construction, IS 302-1)	-	-	-
B.22.4(Construction, IS 302-1)	-	-	-
B.22.5(Construction, IS 302-1)	-	-	-
15.2(Spillage Test)	-	-	-
15.2(Moisture resistance)	-	-	-

03 Oct, 2027

-
Included w.e.f 02.09.2025 Cl 19.11.4.1-19.11.4.7(EMI/EMC), Cl 24 (Components), Cl 32 (Radiation Toxicity and Similar Hazards)

IS 302 : Part 2 : Sec 32 (1994)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 32 massage appliances

-----

38500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 31 302-2-32 : 1994(Resistance to Rusting)	-	2000	-
Cl. 30 302-2-32 : 1994(Resistance to Heat Fire & Tracking )	-	2500	-
Cl. 29 302-2-32 : 1994(Clearances, Creepage Distances & Solid insulation )	-	1500	-
Cl. 28 302-2-32 : 1994(Screws & Connections)	-	1000	-
Cl. 27 302-2-32 : 1994(Provision for Earthing )	-	2000	-
Cl. 26 302-2-32 : 1994(Terminals for External conductors )	-	1000	-
Cl. 25 302-2-32 : 1994(Supply Connection & External Flexible Cords)	-	2000	-
Cl. 24 302-2-32 : 1994(Components)	-	1000	-
Cl. 23 302-2-32 : 1994(Internal Wiring)	-	3000	-
Cl. 22 302-2-32 : 1994(Construction )	-	1000	-
Cl. 21 302-2-32 : 1994(Mechanical strength)	-	1500	-
Cl. 20 302-2-32 : 1994(Stability & Mechanical Hazards)	-	1500	-
Cl. 19 302-2-32 : 1994(Abnormal Operation )	-	3000	-
Cl. 18 302-2-32 : 1994(Endurance)	-	1000	-
Cl. 17 302-2-32 : 1994(Overload Protection of Transformers and Associated Circuit)	-	1500	-
Cl. 16 302-2-32 : 1994(Leakage Current & Electric Strength at Operating Temperature (After Humidity Treatment))	-	1500	-
Cl. 15 302-2-32: 1994(Moisture Resistance Test )	-	2000	-
Cl. 14 302-2-32 : 1994(Radio and television interference suppression / Transient over voltages)	-	1000	-
Cl. 13 302-2-32 : 1994(Leakage Current & Electric Strength at Operating Temperature)	-	1500	-
Cl. 11 302-2-32 : 1994(Temperature Rise)	-	3000	-
Cl. 10 302-2-32 : 1994(Power Input and Current )	-	3000	-
Cl. 9 302-2-32 : 1994(Protection Against Electric Shock)	-	1000	-
Cl. 8 302-2-32 : 1994(Starting of motor operated appliances)	-	1500	-
Cl. 7 302-2-32 : 1994(Marking)	-	1000	-
(CI. 6 IS 302-2-32 : 1994(Classification )	-	500	-

03 Oct, 2027

-
Included w.e.f 14.08.2025 Exclusion: Cl 19.11.4.1-19.11.4.7(EMI/EMC),Cl. 32 302-2-32 : 1994 (Radiation Hazards)

IS 302 : Part 2 : Sec 8 (2024)

Household and Similar Electrical Appliances âSafety Part 2 Particular Requirements Section 8 Shavers, Hair Clippers and Similar Appliances (First Revision)

28000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking and instructions)	-	1000	-
8(Protection against access to live parts)	-	1500	-
10(Power input and current)	-	1500	-
11(Heating)	-	1500	-
12(Charging of metal-ion batteries)	-	1500	-
13.1 &13.2(Leakage current test)	-	500	-
13.1 &13.3(Electric strength test)	-	500	-
14(Transient overvoltages)	-	500	-
15(Moisture resistance)	-	1000	-
15.3(Moisture resistance)	-	1000	-
16.1 &16.2(Leakage current test)	-	1000	-
16.1 & 16.3(Electric strength test)	-	1000	-
17(Overload protection of transformers and associated circuits)	-	1500	-
19.1 to 19.13, Table No. - 9(Abnormal operation)	-	1500	-
19.101(Abnormal operation)	-	1500	-
20.1(Stability and mechanical hazards)	-	1000	-
20.2(Stability and mechanical hazards)	-	1000	-
21(Mechanical strength)	-	1000	-
21.101(Mechanical strength)	-	1000	-
21.102(Mechanical strength)	-	1000	-
21.103(Mechanical strength)	-	1000	-
22(Construction)	-	1000	-
22.101(Construction)	-	1000	-
22.102(Construction)	-	1000	-
22.103(Construction)	-	1000	-
23(Internal wiring)	-	1000	-
24(Components)	-	1000	-
25("Supply connection and external flexible cords")	-	1500	-
26("Terminals for external conductors")	-	500	-
27(Provision for earthing)	-	1000	-
28(Screws and connections)	-	500	-
29("Clearances, creepage distances and solid insulation")	-	500	-
30(Resistance to heat and fire)	-	500	-
31(Resistance to rusting)	-	500	-
7(Marking and instructions)	-	1000	-
8(Protection against access to live parts)	-	1500	-
10(Power input and current)	-	1500	-
11(Heating)	-	1500	-
12(Charging of metal-ion batteries)	-	1500	-
13.1 &13.2(Leakage current test)	-	500	-
13.1 &13.3(Electric strength test)	-	500	-
14(Transient overvoltages)	-	500	-
15(Moisture resistance)	-	1000	-
15.3(Moisture resistance)	-	1000	-
16.1 &16.2(Leakage current test)	-	1000	-
16.1 & 16.3(Electric strength test)	-	1000	-
17(Overload protection of transformers and associated circuits)	-	1500	-
19.1 to 19.13, Table No. - 9(Abnormal operation)	-	1500	-
19.101(Abnormal operation)	-	1500	-
20.1(Stability and mechanical hazards)	-	1000	-
20.2(Stability and mechanical hazards)	-	1000	-
21(Mechanical strength)	-	1000	-
21.101(Mechanical strength)	-	1000	-
21.102(Mechanical strength)	-	1000	-
21.103(Mechanical strength)	-	1000	-
22(Construction)	-	1000	-
22.101(Construction)	-	1000	-
22.102(Construction)	-	1000	-
22.103(Construction)	-	1000	-
23(Internal wiring)	-	1000	-
24(Components)	-	1000	-
25("Supply connection and external flexible cords")	-	1500	-
26("Terminals for external conductors")	-	500	-
27(Provision for earthing)	-	1000	-
28(Screws and connections)	-	500	-
29("Clearances, creepage distances and solid insulation")	-	500	-
30(Resistance to heat and fire)	-	500	-
31(Resistance to rusting)	-	500	-

03 Oct, 2027

-
Included w.e.f 14.08.2025 Exclusion: Cl 19.11.4.1-19.11.4.7(EMI/EMC), 32 ("Radiation, toxicity and similar hazards")

IS 1293 (2019)

Plugs and socket - Outlets of rated Voltage up to and including 250 Volts and rated current up to and including 16 amperes - Specification (Third Revision)

----

14800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(RATINGS)	-	100	-
7.1.1(Accessories Classification)	-	50	-
7.1.2(Accessories Classification)	-	50	-
7.1.3(Accessories Classification)	-	50	-
7.1.4(Accessories Classification)	-	50	-
7.1.5(Accessories Classification)	-	50	-
7.2.1(Socket-Outlets Classification)	-	50	-
7.2.2(Socket-Outlets Classification)	-	50	-
7.2.3(Socket-Outlets Classification)	-	50	-
7.2.4(Socket-Outlets Classification)	-	50	-
7.3(Plug Classification)	-	50	-
8(Marking)	-	100	-
9(CHECKING OF DIMENSIONS)	-	100	-
10(PROTECTION AGAINST ELECTRIC SHOCK)	-	2000	-
11(Provision for earthing)	-	1500	-
12(terminals)	-	50	-
13.1(Construction of fixed Socket Outlets)	-	500	-
13.2(Construction of fixed Socket Outlets)	-	50	-
13.3(Construction of fixed Socket Outlets)	-	50	-
13.4(Construction of fixed Socket Outlets)	-	50	-
13.5(Construction of fixed Socket Outlets)	-	50	-
13.6(Construction of fixed Socket Outlets)	-	50	-
13.7(Construction of fixed Socket Outlets)	-	50	-
13.8(Construction of fixed Socket Outlets)	-	50	-
13.9(Construction of fixed Socket Outlets)	-	50	-
13.10(Construction of fixed Socket Outlets)	-	50	-
13.11(Construction of fixed Socket Outlets)	-	50	-
13.12(Construction of fixed Socket Outlets)	-	50	-
13.14(Construction of fixed Socket Outlets)	-	50	-
13.17(Construction of fixed Socket Outlets)	-	50	-
13.18(Construction of fixed Socket Outlets)	-	50	-
13.19(Construction of fixed Socket Outlets)	-	50	-
13.2(Construction of fixed Socket Outlets)	-	50	-
13.21(Construction of fixed Socket Outlets)	-	50	-
13.22(Construction of fixed Socket Outlets)	-	50	-
13.23(Construction of fixed Socket Outlets)	-	50	-
14.1(CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-	500	-
14.2(CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-	50	-
14.3(CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-	50	-
14.4(CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-	50	-
14.5(CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-	50	-
14.6(CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-	50	-
14.7(CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-	50	-
14.8(CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-	50	-
14.9(CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-	50	-
14.10(CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-	50	-
14.11(CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-	50	-
14.12(CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-	50	-
14.14(CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-	50	-
14.15(CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-	50	-
14.16(CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-	50	-
14.17(CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-	50	-
14.18(CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-	50	-
14.21(CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-	50	-
14.22(CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-	50	-
14.23(CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-	50	-
14.24(CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-	50	-
14.25(CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-	50	-
14.26(CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-	50	-
16.1(Resistance to Ageing)	-	500	-
16.3(Resistance to Humidity)	-	500	-
17.1(RESISTANCE AND ELECTRIC STRENGTH)	-	100	-
17.2(INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-	50	-
18(OPERATION OF EARTHING CONTACTS)	-	50	-
19(TEMPERATURE RISE)	-	1000	-
20(Making & Breaking Capacity)	-	50	-
21(Normal Operation)	-	100	-
22.1(Verification of the Maximum Withdrawal Force)	-	100	-
22.2(Verification of Minimum Withdrawal Force)	-	100	-
23.1(FLEXIBLE CABLES AND THEIR CONNECTION)	-	100	-
23.2(FLEXIBLE CABLES AND THEIR CONNECTION)	-	50	-
23.3(FLEXIBLE CABLES AND THEIR CONNECTION)	-	50	-
23.4(FLEXIBLE CABLES AND THEIR CONNECTION)	-	50	-
24.1(MECHANICAL STRENGTH For all kinds of fixed socketoutlets)	-	100	-
24.1(MECHANICAL STRENGTH For portable multiple and combined socket outlets with enclosures, covers or bodies other than thermoplastic or elastomeric material)	-	50	-
24.1(MECHANICAL STRENGTH For surface mounting boxes)	-	50	-
24.2(MECHANICAL STRENGTH For portable single socket-outlets: 1) with enclosures, covers or bodies other than thermoplastic or elastomeric material)	-	50	-
24.2(MECHANICAL STRENGTH For portable multiple and combined socket outlets: 1) with enclosures, covers and bodies of elastomeric or thermoplastic material)	-	50	-
24.2(MECHANICAL STRENGTH For plug 1) with enclosures, covers and bodies of elastomeric or thermoplastic material)	-	50	-
24.2(MECHANICAL STRENGTH For plug 1) with enclosures, covers and bodies of elastomeric or thermoplastic material)	-	50	-
24.4(MECHANICAL STRENGTH For portable single socket-outlets: 1) with enclosures, covers or bodies of thermoplastic or elastomeric material)	-	50	-
24.4(MECHANICAL STRENGTH For portable multiple and combined socket outlets: 1) with enclosures, covers and bodies of elastomeric or thermoplastic material)	-	50	-
24.5(MECHANICAL STRENGTH For Plug 1) with enclosures, covers and bodies of elastomeric or thermoplastic material)	-	50	-
24.6(MECHANICAL STRENGTH For screwed glands of accessories having an IP code higher than IP20)	-	50	-
24.7(MECHANICAL STRENGTH For plug pins provided with insulating sleeves)	-	50	-
24.8(MECHANICAL STRENGTH For shuttered socketoutlets)	-	50	-
24.10(MECHANICAL STRENGTH For Plug (1) with enclosures, covers or bodies other than thermoplastic or elastomeric material)	-	50	-
24.14.1(MECHANICAL STRENGTH For fixed socket-outlets)	-	50	-
24.14.2(MECHANICAL STRENGTH For fixed socket-outlets)	-	50	-
24.14.3(MECHANICAL STRENGTH For plugs and portable socketoutlets)	-	50	-
24.15(MECHANICAL STRENGTH)	-	50	-
24.16(MECHANICAL STRENGTH)	-	50	-
25.1(Resistance to heat)	-	100	-
25.2(Resistance to heat)	-	50	-
25.3(Resistance to heat)	-	50	-
25.4(Resistance to heat)	-	50	-
26.1(SCREWS, CURRENTCARRYING PARTS AND CONNECTIONS)	-	100	-
26.2(SCREWS, CURRENTCARRYING PARTS AND CONNECTIONS)	-	50	-
26.3(SCREWS, CURRENTCARRYING PARTS AND CONNECTIONS)	-	50	-
26.4(SCREWS, CURRENTCARRYING PARTS AND CONNECTIONS)	-	50	-
26.5(SCREWS, CURRENTCARRYING PARTS AND CONNECTIONS)	-	50	-
26.6(SCREWS, CURRENTCARRYING PARTS AND CONNECTIONS)	-	50	-
26.7(SCREWS, CURRENTCARRYING PARTS AND CONNECTIONS)	-	50	-
27.1(CREEPAGE DISTANCES, CLEARANCES AND DISTANCES THROUGH SEALING COMPOUND)	-	200	-
27.2(CREEPAGE DISTANCES, CLEARANCES AND DISTANCES THROUGH SEALING COMPOUND)	-	50	-
28.1.1(Glow-Wire Test)	-	500	-
28.2(Resistance to Tracking)	-	500	-
29(Resistance to Rusting)	-	500	-
30.1(ADDITIONAL TESTS ON PINS PROVIDED WITH INSULATING SLEEVES Pressure Test at High Temperature)	-	150	-
30.2(ADDITIONAL TESTS ON PINS PROVIDED WITH INSULATING SLEEVES Static Damp Heat Test)	-	50	-
30.3(ADDITIONAL TESTS ON PINS PROVIDED WITH INSULATING SLEEVES Tests at Low Temperature)	-	50	-
30.4(ADDITIONAL TESTS ON PINS PROVIDED WITH INSULATING SLEEVES Impact Test at Low Temperature)	-	50	-
13.13(Construction of fixed Socket Outlets)	-	50	-
13.15(Construction of fixed Socket Outlets)	-	50	-
13.16(Construction of fixed Socket Outlets)	-	50	-
14.13(CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-	50	-
14.19(CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-	50	-
14.20(CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-	50	-
15(INTERLOCKED SOCKET-OUTLETS)	-	50	-
16.2(RESISTANCE TO HARMFUL INGRESS OF WATER AND TO HUMIDITY)	-	50	-
17.3(INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-	50	-
24.3(MECHANICAL STRENGTH for fixed socket-outlets with a main part intended to be mounted directly on a surface)	-	50	-
24.5(MECHANICAL STRENGTH For portable single socket-outlets: 1) with enclosures, covers or bodies of thermoplastic or elastomeric material)	-	50	-
24.5(MECHANICAL STRENGTH For portable multiple and combined socket outlets: 1) with enclosures, covers and bodies of elastomeric or thermoplastic material)	-	50	-
24.9(MECHANICAL STRENGTH For portable multiple and combined socket outlets (1) with enclosures, covers or bodies other than thermoplastic or elastomeric material)	-	50	-
24.11(MECHANICAL STRENGTH For portable socketoutlets having means for suspension on a wall)	-	50	-
24.12(MECHANICAL STRENGTH For portable socketoutlets having means for suspension on a wall)	-	50	-
24.13(MECHANICAL STRENGTH For portable socketoutlets having means for suspension on a wall)	-	50	-
27.3(CREEPAGE DISTANCES, CLEARANCES AND DISTANCES THROUGH SEALING COMPOUND)	-	50	-
24.9(MECHANICAL STRENGTH For portable multiple and combined socket outlets (1) with enclosures, covers or bodies other than thermoplastic or elastomeric material)	-	50	-
24.10(MECHANICAL STRENGTH For Plug (1) with enclosures, covers or bodies of thermoplastic or elastomeric material)	-	50	-
24.16(MECHANICAL STRENGTH For shroud of portable socket-outlets)	-	50	-

03 Oct, 2027

-
Included w.e.f. 11-02-2025

IS 302 : Part 2 : Sec 8 (1994)

Safety of household and similar electrical appliances : part 2 particular requirements, section 8 electrical shavers hair, clippers and similar appliances

----

22000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
31(Resistance to Rusting)	-	500	-
30(Resistance to Heat & Fire)	-	1000	-
29(Clearances, Creepage Distances & Solid Insulation)	-	1000	-
28(Screws & Connection)	-	500	-
27(Provision For Earthing)	-	1500	-
26(Terminals For External Conductors)	-	500	-
25(Supply Connection & External Flexible Cables and Cords)	-	1000	-
24(Component)	-	500	-
23(Internal wiring)	-	500	-
22(Construction)	-	500	-
21(Mechanical strength)	-	500	-
20(Stability & Mechanical Hazards)	-	500	-
19(Abnormal Operation)	-	1500	-
18(Endurance)	-	200	-
17(Overload Protection/ Overload Protection of Transformers & Associated Circuits)	-	500	-
16(Leakage Current and Electric Strength)	-	1500	-
15(Moisture Resistance)	-	1000	-
14(Radio and Television Interference Suppression/ Transient Over Voltage)	-	1500	-
13(Leakage Current and Electric Strength at Operating Temperature)	-	1500	-
11(Temperature Rise/Heating)	-	1500	-
10(Power Input & Current)	-	2000	-
9(Starting Of Motor Operated Appliances)	-	200	-
8(Protection against Electric Shock/ Protection against Access to Live Parts)	-	500	-
7(Marking/ Marking & Instructions)	-	1000	-
6(Classification)	-	500	-
5(Rating)	-	100	-

03 Oct, 2027

-
Included w.e.f.11.12.2024 Exclusion 32 (Radiation ,Toxicity and similar hazards) 19.11.4.1 to 19.11.4.7 (EMC/EMI)

IS 302 : Part 2 : Sec 21 (2024)

Household and Similar Electrical Appliancesï¿½Safety Part 2 Particular Requirements Section 21 Storage Water Heaters

-----

19800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(General requirement)	-	100	-
5(General conditions for the tests)	-	100	-
6(Classification)	-	100	-
7(Marking and instructions)	-	500	-
8(Protection against access to live parts)	-	500	-
9(Starting of motor-operated appliances)	-	100	-
10(Power input and current)	-	2000	-
11(Heating)	-	1500	-
13(Leakage current and electric strength at operating temperature)	-	1500	-
18(Endurance)	-	100	-
19(Abnormal operation)	-	1000	-
20(Stability and mechanical hazards)	-	300	-
21(Mechanical strength)	-	300	-
22(Construction)	-	200	-
23(Internal wiring)	-	200	-
24(Components)	-	200	-
25(Supply connection and external flexible cords)	-	500	-
26(Terminals for external conductors)	-	500	-
27(Provision for earthing)	-	1000	-
28(Screws and connections)	-	500	-
29(Clearances, creepage distances and solid insulation)	-	500	-
30(Resistance to heat and fire)	-	500	-
31(Resistance to rusting)	-	1000	-
A.101(Pressure test)	-	500	-
12(Charging of metal-ion batteries)	-	100	-
22.101(rated pressure)	-	500	-
22.102(Closed water heaters)	-	500	-
22.103(Addition)	-	500	-
22.104(Addition)	-	500	-
22.105(Cistern-type water heaters)	-	500	-
22.109(Addition)	-	500	-
14(Transient overvoltages)	-	1000	-
15(Moisture resistance)	-	500	-
16(Leakage current and electric strength)	-	1000	-
17(Overload protection of transformers and associated circuits)	-	500	-

03 Oct, 2027

-
Included .w.e.f.04.12.2024 Exclusion 19.11.4.1 (Electrostatic discharges) 19.11.4.2 (Radiated fields) 19.11.4.3 (Fast transient bursts) 19.11.4.4 (Surge immunity test) 19.11.4.5 (Immunity to conducted discharges) 19.11.4.6 (Class 3 Voltage dips and interruptions) 19.11.4.7 (Harmonics) 32 (RADIATION TOXICITY AND SIMILAR HAZARDS)

IS 302 : Part 2 : SEC 31 (2009)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 31 range hoods

----

36000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause No - 5(GENERAL CONDITIONS FOR THE TESTS)	-	500	-
Clause No - 5.18(linear and angular dimension)	-	500	-
Clause No - 6.2(harmfull ingress of water)	-	500	-
Clause No - 8.1.1("PROTECTION AGAINST ACCESS TO LIVE PART- test probe B")	-	500	-
Clause No - 8.1.2("PROTECTION AGAINST ACCESS TO LIVE PART - test probe 13")	-	500	-
Clause No - 8.2(Addition)	-	500	-
Clause No - 10.1, Table No. -1(power input deviation)	-	4000	-
Clause No - 13.3("LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE")	-	1000	-
Clause No - 13.3,Table No.- 4(voltage for electrical strength)	-	1000	-
Clause No - 14(Impulse test voltage)	-	1500	-
Clause No - 15.1.1(MOISTURE RESISTANCE)	-	1000	-
Clause No -19.7(test is repeated with the capacitor short circuited)	-	1000	-
Clause No -21.1(Mechanical strength)	-	500	-
Clause No -22.1(construction)	-	500	-
Clause No -22.11(push force applied)	-	500	-
Clause No -24.1.2(safety isolating transformer)	-	500	-
Clause No -24.1.3(for switches)	-	1000	-
Clause No -24.1.4(for automatic control)	-	1000	-
Clause No -24.1.5(for innterconnection couplers)	-	1000	-
Clause No -24.4(plug and socket)	-	1000	-
Clause No -25.8, Table no -11(conductor resistance)	-	1000	-
Clause No -25.5(dimension for pins)	-	1000	-
Clause No -27.6(for circuit board)	-	1000	-
Clause No -29.2(comparative tracking index)	-	1000	-
Clause No -29.3.3(dry heat test)	-	1000	-
Clause No -30.2.1(glow wire test)	-	1000	-
Clause No -30.101("incorporate combustible material")	-	1000	-
Clause No - 5(GENERAL CONDITIONS FOR THE TESTS)	-	500	-
Clause No - 5.18(linear and angular dimension)	-	500	-
Clause No - 6.2(harmfull ingress of water)	-	1000	-
Clause No - 8.1.1("PROTECTION AGAINST ACCESS TO LIVE PART- test probe B")	-	1000	-
Clause No - 8.1.2("PROTECTION AGAINST ACCESS TO LIVE PART - test probe 13")	-	1000	-
Clause No - 8.2(Addition)	-	1000	-
Clause No - 10.1, Table No. -1(power input deviation)	-	0	-
Clause No - 13.3("LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE")	-	0	-
Clause No - 13.3,Table No.- 4(voltage for electrical strength)	-	0	-
Clause No - 14(Impulse test voltage)	-	0	-
Clause No - 15.1.1(MOISTURE RESISTANCE)	-	0	-
Clause No -19.7(test is repeated with the capacitor short circuited)	-	0	-
Clause No -21.1(Mechanical strength)	-	0	-
Clause No -22.1(construction)	-	0	-
Clause No -22.11(push force applied)	-	0	-
Clause No -24.1.2(safety isolating transformer)	-	0	-
Clause No -24.1.3(for switches)	-	0	-
Clause No -24.1.4(for automatic control)	-	0	-
Clause No -24.1.5(for innterconnection couplers)	-	0	-
Clause No -24.4(plug and socket)	-	0	-
Clause No -25.8, Table no -11(conductor resistance)	-	0	-
Clause No -25.5(dimension for pins)	-	0	-
Clause No -27.6(for circuit board)	-	0	-
Clause No -29.2(comparative tracking index)	-	0	-
Clause No -29.3.3(dry heat test)	-	0	-
Clause No -30.2.1(glow wire test)	-	0	-
Clause No -30.101("incorporate combustible material")	-	0	-
15(MOISTURE RESISTANCE)	-	500	-
16(LEAKAGE CURRENT AND ELECTRIC STRENGTH)	-	1000	-
17(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	1000	-
18(ENDURANCE)	-	1000	-
28(SCREWS AND CONNECTIONS)	-	1000	-
31(RESISTANCE TO RUSTING)	-	1000	-
Clause No - 5(GENERAL CONDITIONS FOR THE TESTS)	-	0	-
Clause No - 5.18(linear and angular dimension)	-	0	-
Clause No - 6.2(harmfull ingress of water)	-	0	-
Clause No - 8.1.1("PROTECTION AGAINST ACCESS TO LIVE PART- test probe B")	-	0	-
Clause No - 8.1.2("PROTECTION AGAINST ACCESS TO LIVE PART - test probe 13")	-	0	-
Clause No - 8.2(Addition)	-	0	-
Clause No - 10.1, Table No. -1(power input deviation)	-	0	-
Clause No - 13.3("LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE")	-	0	-
Clause No - 13.3,Table No.- 4(voltage for electrical strength)	-	0	-
Clause No - 14(Impulse test voltage)	-	0	-
Clause No - 15.1.1(MOISTURE RESISTANCE)	-	0	-
Clause No -19.7(test is repeated with the capacitor short circuited)	-	0	-
Clause No -21.1(Mechanical strength)	-	0	-
Clause No -22.1(construction)	-	0	-
Clause No -22.11(push force applied)	-	0	-
Clause No -24.1.2(safety isolating transformer)	-	0	-
Clause No -24.1.3(for switches)	-	0	-
Clause No -24.1.4(for automatic control)	-	0	-
Clause No -24.1.5(for innterconnection couplers)	-	0	-
Clause No -24.4(plug and socket)	-	0	-
Clause No -25.8, Table no -11(conductor resistance)	-	0	-
Clause No -25.5(dimension for pins)	-	0	-
Clause No -27.6(for circuit board)	-	0	-
Clause No -29.2(comparative tracking index)	-	0	-
Clause No -29.3.3(dry heat test)	-	0	-
Clause No -30.2.1(glow wire test)	-	0	-
Clause No -30.101("incorporate combustible material")	-	0	-
15(MOISTURE RESISTANCE)	-	0	-
16(LEAKAGE CURRENT AND ELECTRIC STRENGTH)	-	0	-
17(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	0	-
18(ENDURANCE)	-	0	-
28(SCREWS AND CONNECTIONS)	-	0	-
31(RESISTANCE TO RUSTING)	-	0	-
Clause No - 5(GENERAL CONDITIONS FOR THE TESTS)	-	0	-
Clause No - 5.18(linear and angular dimension)	-	0	-
Clause No - 6.2(harmfull ingress of water)	-	0	-
Clause No - 8.1.1("PROTECTION AGAINST ACCESS TO LIVE PART- test probe B")	-	0	-
Clause No - 8.1.2("PROTECTION AGAINST ACCESS TO LIVE PART - test probe 13")	-	0	-
Clause No - 8.2(Addition)	-	0	-
Clause No - 10.1, Table No. -1(power input deviation)	-	0	-
Clause No - 13.3("LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE")	-	0	-
Clause No - 13.3,Table No.- 4(voltage for electrical strength)	-	0	-
Clause No - 14(Impulse test voltage)	-	0	-
Clause No - 15.1.1(MOISTURE RESISTANCE)	-	0	-
Clause No -19.7(test is repeated with the capacitor short circuited)	-	0	-
Clause No -21.1(Mechanical strength)	-	0	-
Clause No -22.1(construction)	-	0	-
Clause No -22.11(push force applied)	-	0	-
Clause No -24.1.2(safety isolating transformer)	-	0	-
Clause No -24.1.3(for switches)	-	0	-
Clause No -24.1.4(for automatic control)	-	0	-
Clause No -24.1.5(for innterconnection couplers)	-	0	-
Clause No -24.4(plug and socket)	-	0	-
Clause No -25.8, Table no -11(conductor resistance)	-	0	-
Clause No -25.5(dimension for pins)	-	0	-
Clause No -27.6(for circuit board)	-	0	-
Clause No -29.2(comparative tracking index)	-	0	-
Clause No -29.3.3(dry heat test)	-	0	-
Clause No -30.2.1(glow wire test)	-	0	-
Clause No -30.101("incorporate combustible material")	-	0	-
15(MOISTURE RESISTANCE)	-	0	-
16(LEAKAGE CURRENT AND ELECTRIC STRENGTH)	-	0	-
17(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	0	-
18(ENDURANCE)	-	0	-
28(SCREWS AND CONNECTIONS)	-	0	-
31(RESISTANCE TO RUSTING)	-	0	-

03 Oct, 2027

-
Included.w.e.f.26.11.2024 Exclusion - 19.11.4.1 to 19.11.4.4 (EMI/EMC)

IS 8978 (1992)

Specification for electric instantaneous water heaters (Second Revision)

----

14800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.7 of IS 302-2-35:2017(Marking)	-	200	-
Cl.7 of IS 302-2-35:2017(Marking)	-	0	-
Cl.7 of IS 302-2-35:2017(Marking)	-	0	-
Cl.7 of IS 302-2-35:2017(Marking)	-	0	-
Cl.7 of IS 302-2-35:2017(Marking)	-	0	-
Cl.7 of IS 302-2-35:2017(Marking)	-	0	-
Cl.7 of IS 302-2-35:2017(Marking)	-	0	-
Cl.7 of IS 302-2-35:2017(Marking)	-	0	-
Cl.7 of IS 302-2-35:2017(Marking)	-	0	-
Cl.7 of IS 302-2-35:2017(Marking)	-	0	-
Cl.7 of IS 302-2-35:2017(Marking)	-	0	-
Cl.7 of IS 302-2-35:2017(Marking)	-	0	-
Cl.7 of IS 302-2-35:2017(Marking)	-	0	-
Cl.7 of IS 302-2-35:2017(Marking)	-	0	-
Cl.7 of IS 302-2-35:2017(Marking)	-	0	-
Cl.7 of IS 302-2-35:2017(Marking)	-	0	-
Cl.7 of IS 302-2-35:2017(Marking)	-	0	-
Cl.7 of IS 302-2-35:2017(Marking)	-	0	-
Cl.7 of IS 302-2-35:2017(Marking)	-	0	-
Cl.7 of IS 302-2-35:2017(Marking)	-	0	-
Cl.7 of IS 302-2-35:2017(Marking)	-	0	-
Cl.7 of IS 302-2-35:2017(Marking)	-	0	-
Cl.7 of IS 302-2-35:2017(Marking)	-	0	-
Cl.7 of IS 302-2-35:2017(Marking)	-	0	-
Cl.7 of IS 302-2-35:2017(Marking)	-	0	-
Cl.6 of IS 302-2-35:2017(Classification)	-	100	-
Cl.6 of IS 302-2-35:2017(Classification)	-	0	-
Cl.8 of IS 302-2-35:2017(Protection Against Access To Live Parts)	-	500	-
Cl.10 of IS 302-2- 35:2011(Power Input & Current )	-	1200	-
Cl.11 of 302-2-35:2017(Heating)	-	1000	-
Cl.11 of 302-2-35:2017(Heating)	-	0	-
Cl.11 of 302-2-35:2017(Heating)	-	0	-
Cl.11 of 302-2-35:2017(Heating)	-	0	-
Cl.13 of IS 302-2-35:2017(Leakage Current & Electrical Strength at Operating Temperature )	-	1000	-
Cl.13 of IS 302-2-35:2017(Leakage Current & Electrical Strength at Operating Temperature )	-	0	-
Cl.14 of IS 302-2-35:2017(Transient Over Voltages )	-	500	-
Cl.15 of IS 302-2-35-2011(Moisture Resistance )	-	500	-
Cl.15 of IS 302-2-35-2011(Moisture Resistance )	-	0	-
Cl.16 of IS 302-2-35:2011(Leakage Current and Electric Strength)	-	500	-
Cl.16 of IS 302-2-35:2011(Leakage Current and Electric Strength)	-	0	-
Cl.17 IS 302-2-35:2017(Overload Protection of Transformers & Associated circuits )	-	200	-
Cl.19 of IS 302-2-35:2017(Abnormal Operation)	-	500	-
Cl.19 of IS 302-2-35:2017(Abnormal Operation)	-	0	-
Cl.19 of IS 302-2-35:2017(Abnormal Operation)	-	0	-
Cl.19 of IS 302-2-35:2017(Abnormal Operation)	-	0	-
Cl.19 of IS 302-2-35:2017(Abnormal Operation)	-	0	-
Cl.20 of IS 302-2-35-2011(Stability & Mechanical Hazards )	-	200	-
Cl.21.1 of IS 302-2-35-2011(Mechanical strength)	-	200	-
Cl. 21.2 of IS 302-1:2008(Mechanical strength)	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	500	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.23 of IS 302-2-35-2011(Internal Wiring)	-	500	-
Cl.23 of IS 302-2-35-2011(Internal Wiring)	-	0	-
Cl.23 of IS 302-2-35-2011(Internal Wiring)	-	0	-
Cl.23 of IS 302-2-35-2011(Internal Wiring)	-	0	-
Cl.23 of IS 302-2-35-2011(Internal Wiring)	-	0	-
Cl.23 of IS 302-2-35-2011(Internal Wiring)	-	0	-
Cl.23 of IS 302-2-35-2011(Internal Wiring)	-	0	-
Cl.23 of IS 302-2-35-2011(Internal Wiring)	-	0	-
Cl.23 of IS 302-2-35-2011(Internal Wiring)	-	0	-
Cl.23 of IS 302-2-35-2011(Internal Wiring)	-	0	-
Cl.23 of IS 302-2-35-2011(Internal Wiring)	-	0	-
Cl.23 of IS 302-2-35-2011(Internal Wiring)	-	0	-
Cl.23 of IS 302-2-35-2011(Internal Wiring)	-	0	-
Cl.23 of IS 302-2-35-2011(Internal Wiring)	-	0	-
Cl.24 of IS 302-2-35:2017(Component )	-	200	-
Cl.24 of IS 302-2-35:2017(Component )	-	0	-
Cl.24 of IS 302-2-35:2017(Component )	-	0	-
Cl.24 of IS 302-2-35:2017(Component )	-	0	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	500	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	0	-
Cl.27 of IS 302-2-35:2017(Provision for Earthing)	-	500	-
Cl.27 of IS 302-2-35:2017(Provision for Earthing)	-	0	-
Cl.27 of IS 302-2-35:2017(Provision for Earthing)	-	0	-
Cl.27 of IS 302-2-35:2017(Provision for Earthing)	-	0	-
Cl.27 of IS 302-2-35:2017(Provision for Earthing)	-	0	-
Cl.27 of IS 302-2-35:2017(Provision for Earthing)	-	0	-
Cl.27 of IS 302-2-35:2017(Provision for Earthing)	-	0	-
Cl.28 of IS 302-2-35:2017(Screws and Connections )	-	200	-
Cl.29 of IS 302-2-35:2017(Clearances, Creepage Distances and Solid Insulation)	-	500	-
Cl.29 of IS 302-2-35:2017(Clearances, Creepage Distances and Solid Insulation)	-	0	-
Cl.29 of IS 302-2-35:2017(Clearances, Creepage Distances and Solid Insulation)	-	0	-
Cl.30 of IS 302-2-35: 2011(Resistance to Heat and Fire)	-	500	-
Cl.30 of IS 302-2-35: 2011(Resistance to Heat and Fire)	-	0	-
Cl.31 of IS 302-2-35: 2011(Resistance to Rusting )	-	200	-
Cl.10 of IS 8978 : 1992(Finish)	-	500	-
Cl.11 of IS 8978 : 1992(Operation of flow switch)	-	500	-
Cl.12 of IS 8978 : 1992(Endurance)	-	500	-
Cl.12 of IS 8978 : 1992(Endurance)	-	0	-
Cl.10 of IS 8978 : 1992(Finish)	-	0	-
Cl.31 of IS 302-2-35: 2017(Resistance to Rusting )	-	0	-
Cl.30.2 of IS 302-1:2008(Resistance to Heat and Fire)	-	50	-
Cl.30.1 of IS 302-1:2008(Resistance to Heat and Fire)	-	0	-
Cl.29.2 of IS 302-2-35:2017(Clearances, Creepage Distances and Solid Insulation : Creepage distance )	-	50	-
Cl.29.1 of IS 302-2-35:2017(Clearances, Creepage Distances and Solid Insulation : Clearance distance )	-	50	-
Cl.28 of IS 302-2-35:2017(Screws and Connections )	-	50	-
Cl.27.5 of IS 302-2-35:2017(Provision for Earthing : ECR )	-	50	-
Cl.27 of IS 302-2-35:2017(Provision for Earthing)	-	0	-
Cl.26 of IS 302-2-35:2017(Terminals for External Conductors)	-	0	-
Cl.23 of IS 302-2-35:2017(Internal Wiring ; Colour of earthing conductor)	-	50	-
Cl.23 of IS 302-2-35:2017(Internal Wiring)	-	0	-
Cl.22.110 of IS 302-2-35:2017(Construction : Provision for fixing to wall )	-	50	-
Cl.22.109 of IS 302-2-35:2017(Construction : Operation of presure switch of open outlet water heater )	-	50	-
Cl.22.108 of IS 302-2-35:2017(Construction : Temperature of outlet water intended to supply for showring )	-	50	-
Cl.22.107 of IS 302-2-35:2017(Construction : Temperature of outlet )	-	50	-
Cl.22.106 of IS 302-2-35:2017(Construction : Operation of thermal cut out for closed water heater )	-	50	-
Cl.22.104 of IS 302-2-35:2017(Construction : Pressure in open outlet water heaters )	-	50	-
Cl.22.103 of IS 302-2-35:2017(Construction : Pressure relief device operation for closed water heater )	-	50	-
Cl.22.102 of IS 302-2-35:2017(Construction : excessive temperature of outlet )	-	50	-
Cl.22.101 of IS 302-2-35:2017(Construction : Rated pressure of closed water heater )	-	50	-
Cl.22.47 of IS 302-2-35:2017(Construction : Water pressure test )	-	50	-
Cl.22.44 of IS 302-1:2008(Construction : Shape and decoration )	-	50	-
Cl.22.34, Cl 22.35 of IS 302-1:2008(Construction : Shaft of operating Knobs )	-	50	-
Cl.22.33 of IS 302-1:2008(Construction : Direct contact of liquids )	-	50	-
Cl 22.26 ,Cl.22.28, Cl 22.29, Cl 22.30 , Cl 22.31, Cl 22.32 of IS 302-1:2008(Construction : Supplymentry/ double / reinforced insulation for Class II/ Class III appliance )	-	50	-
Cl.22.18 of IS 302-1:2008(Construction : Resistance to corrosion )	-	50	-
Cl.22.17 of IS 302-1:2008(Construction : Spacers )	-	50	-
Cl.22.14 of IS 302-1:2008(Construction : Ragged or sharp edges )	-	50	-
Cl.22.12 of IS 302-1:2008(Construction : Fixing of Handle, knob, grips, levers and similar parts )	-	50	-
Cl.22.11 of IS 302-1:2008(Construction : Fixing of non detachable parts )	-	50	-
Cl.22.7 of IS 302-1:2008(Construction : safeguards against the risk of excessive pressure. )	-	50	-
Cl.22.6 of IS 302-2-35:2017(Construction : size of drain hole )	-	100	-
Cl.22.6 of IS 302-1:2008(Construction : effect of water on 3 insulation )	-	100	-
Cl.22.2 of IS 302-1:2008(Construction : connection to supply mains )	-	100	-
Cl.22.1 of IS 302-1:2008(Construction : IP test )	-	100	-
Cl. 21.2 of IS 302-1:2008(Mechanical strength : prevent penetration by sharp implements. )	-	50	-
Cl.21.1 of IS 302-1:2008(Mechanical strength : Rough handling in normal use)	-	100	-
Cl.20 of IS 302-2-35:2017(Stability & Mechanical Hazards )	-	200	-
Cl.19 of IS 302-2-35:2017(Abnormal Operation : effect on container)	-	0	-
Cl.19 of IS 302-2-35:2017(Abnormal Operation : High voltage)	-	0	-
Cl.19 of IS 302-2-35:2017(Abnormal Operation : Temperature rise of insulation of supply cord)	-	0	-
Cl.19 of IS 302-2-35:2017(Abnormal Operation : Temperature rise of test corner)	-	0	-
Cl.19 of IS 302-2-35:2017(Abnormal Operation : Emission of flames, molten metal ,or poisonous or ignitable gas)	-	0	-
Cl.16 of IS 302-2-35:2017(Leakage Current and Electric Strength (After Humidity))	-	0	-
Cl.16 of IS 302-2-35:2017(Leakage Current and Electric Strength (After Humidity))	-	0	-
Cl.15 of IS 302-2-35:2017(Moisture Resistance )	-	0	-
Cl.14 of IS 302-2-35:2017(Transient Over Voltages )	-	0	-
Cl.13 of IS 302-2-35:2017(Leakage Current & 3 Strength at Operating Temperature : High voltage )	-	100	-
Cl.13 of IS 302-2-35:2017(Leakage Current & 3 Strength at Operating Temperature )	-	100	-
Cl.11 of 302-2-35:2017(Heating : room temperature)	-	100	-
Cl.11 of 302-2-35:2017(Heating : Insulation of supply cord)	-	100	-
Cl.11 of 302-2-35:2017(Heating : Temperature rise of test corner)	-	100	-
Cl.10 of IS 302-2- 35:2017(Power Input & Current )	-	0	-
Cl.8 of IS 302-2-35:2017(Protection Against Access To Live Parts)	-	0	-
Cl.7.102 of IS 302-2-35:2017(Marking : Standard mark)	-	0	-
Cl.7.101 of IS 302-2-35:2017(Marking : Woter inlet and outlet idetification)	-	0	-
Cl.7.15 of IS 302-1:2008(Marking : Position of marking)	-	0	-
Cl.7.14 of IS 302-1:2008(Marking ; Legibility and durability)	-	100	-
Cl.7.13 of IS 302-1:2008(Marking : Language)	-	0	-
Cl.7.10 & 7.11 of IS 302-1:2008(Marking : Indication for direction of control)	-	0	-
Cl.7.8 of IS 302-1:2008(Marking : Terminal for connection )	-	0	-
Cl.7.6 of IS 302-1:2008(Marking : Symbols)	-	0	-
Cl.7.1 of IS 302-2-35:2017(Marking : rated pressure)	-	0	-
Cl.7.1 of IS 302-1:2008(Marking : Country of manufacture)	-	0	-
Cl.7.1 of IS 302-1:2008(Marking : IP number )	-	0	-
Cl.7.1 of IS 302-1:2008(Marking : Symbol for class II)	-	0	-
Cl.7.1 of IS 302-1:2008(Marking : Molel or type)	-	0	-
Cl.7.1 of IS 302-1:2008(Marking : Manufacture identification)	-	0	-
Cl.7.1 of IS 302-1:2008(Marking : Rated power input)	-	0	-
Cl.7.1 of IS 302-1:2008(Marking : Nature of supply)	-	0	-
Cl.7.1 of IS 302-1:2008(Marking : Rated Voltage)	-	0	-
4(GENERAL REQUIREMENTS)	-	0	-
5(GENERAL NOTE ON TEST)	-	0	-
7(Marking)	-	0	-
7(Marking)	-	0	-
(Cl.7.1 of IS 302-2-35:2017)(Marking)	-	0	-
(Cl.7.101 of IS 302-2-35:2017)(Marking)	-	100	-
(Cl.8.1.1 of IS 8978:1992)(Marking)	-	0	-
(Cl.19.13 of IS 302-2-35:2017)(Abnormal operation)	-	50	-
(Cl.19.13 of IS 302-2-35:2017)(Abnormal operation)	-	0	-
(Cl.22 of IS 302-2-35:2017)(Construction)	-	0	-
(Cl.22 of IS 302-2-35:2017)(Construction)	-	0	-
(Cl.22 of IS 302-2-35:2017)(Construction)	-	0	-
(Cl.22 of IS 302-2-35:2017)(Construction)	-	0	-
(Cl.22 of IS 302-2-35:2017)(Construction)	-	0	-
(Cl.22 of IS 302-2-35:2017)(Construction)	-	0	-
(Cl.22 of IS 302-2-35:2017)(Construction)	-	0	-
(Cl.22 of IS 302-2-35:2017)(Construction)	-	0	-
(Cl.22 of IS 302-2-35:2017)(Construction)	-	0	-
(Cl.22 of IS 302-2-35:2017)(Construction)	-	0	-
(Cl.23 of IS 302-2-35:2017)(Internal wiring)	-	0	-
(Cl.23 of IS 302-2-35:2017)(Internal wiring)	-	0	-
(Cl.23 of IS 302-2-35:2017)(Internal wiring)	-	0	-
(Cl.23 of IS 302-2-35:2017)(Internal wiring)	-	0	-
(Cl.24 of IS 302-2-35:2017)(Components)	-	0	-
(Cl.24 of IS 302-2-35:2017)(Components)	-	0	-
(Cl.24 of IS 302-2-35:2017)(Components)	-	0	-
(Cl.24 of IS 302-2-35:2017)(Components)	-	0	-
(Cl.24 of IS 302-2-35:2017)(Components)	-	0	-
(Cl.25.8 of IS 302-2-35:2017)(Supply Connection and External Flexible cords)	-	300	-
(CL.27.5 of IS 302-2-35:2017)(Provision for Earthing)	-	0	-
Cl.24 of IS 302-2-35:2017(Component )	-	0	-
Cl.26 of IS 302-2-35:2017(Terminals for External Conductors)	-	0	-
Cl.26 of IS 302-2-35:2017(Terminals for External Conductors)	-	0	-
Cl.26 of IS 302-2-35:2017(Terminals for External Conductors)	-	0	-
Cl.26 of IS 302-2-35:2017(Terminals for External Conductors)	-	0	-
Cl.26 of IS 302-2-35:2017(Terminals for External Conductors)	-	0	-
Cl.26 of IS 302-2-35:2017(Terminals for External Conductors)	-	0	-
Cl.26 of IS 302-2-35:2017(Terminals for External Conductors)	-	0	-
Cl.26 of IS 302-2-35:2017(Terminals for External Conductors)	-	0	-
Cl.26 of IS 302-2-35:2017(Terminals for External Conductors)	-	0	-
Cl.26 of IS 302-2-35:2017(Terminals for External Conductors)	-	0	-
Cl.26 of IS 302-2-35:2017(Terminals for External Conductors)	-	0	-
Cl.25.18 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	0	-
Cl.25.15 of IS 302-2-35:2017(Supply Connection & External Flexible Cords : Cord grip test - displacement )	-	0	-
Cl.25.15 of IS 302-2-35:2017(Supply Connection & External Flexible Cords : Cord grip test )	-	0	-
Cl.25.12 of IS 302-2-35:2017(Supply Connection & External Flexible Cords : Moulding of supply cord )	-	0	-
Cl.25.10 of IS 302-2-35:2017(Supply Connection & External Flexible Cords : Colour of Earthing conductor )	-	0	-
Cl.25.8 of IS 302-2-35:2017(Supply Connection & External Flexible Cords : Resistance of supply cord )	-	0	-
Cl.25.5 of IS 302-2-35:2017(Supply Connection & External Flexible Cords : Type of attachment )	-	0	-
Cl.25.1 of IS 302-2-35:2017(Supply Connection & External Flexible Cords : connection to the supply mains)	-	0	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	0	-
Cl.24 of IS 302-2-35:2017(Component )	-	0	-

03 Oct, 2027

-
Included.w.e.f.26.11.2024 Exclusion 32 (RADIATION, TOXICITY AND SIMILAR HAZARDS), 19.11.4.1 to 19.11.4.7 (EMI/EMC).

IS 369 (2019)

Household electric direct - Acting room heaters - Performance requirements (Fourth Revision)

----

16500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.6 of IS 302-2-30:2007(Classification)	-	200	-
Cl.6 of IS 302-2-30:2007(Classification)	-	0	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008(Marking and Instructions)	-	200	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.8 of IS 302-2-30:2007 &IS:302-1:2008(Protection Against Access to Live Parts)	-	200	-
Cl.10 of IS 302-2-30:2007 &IS:302-1:2008(Power Input and Current)	-	1000	-
Cl.11 of IS 302-2-30:2007 &IS:302-1:2008(Heating)	-	500	-
Cl.11 of IS 302-2-30:2007 &IS:302-1:2008(Heating)	-	0	-
Cl.11 of IS 302-2-30:2007 &IS:302-1:2008(Heating)	-	0	-
Cl.11 of IS 302-2-30:2007 &IS:302-1:2008(Heating)	-	0	-
Cl.11 of IS 302-2-30:2007 &IS:302-1:2008(Heating)	-	0	-
Cl.11 of IS 302-2-30:2007 &IS:302-1:2008(Heating)	-	0	-
Cl.11 of IS 302-2-30:2007 &IS:302-1:2008(Heating)	-	0	-
Cl.11 of IS 302-2-30:2007 &IS:302-1:2008(Heating)	-	0	-
Cl.11 of IS 302-2-30:2007 &IS:302-1:2008(Heating)	-	0	-
Cl.11 of IS 302-2-30:2007 &IS:302-1:2008(Heating)	-	0	-
Cl.11 of IS 302-2-30:2007 &IS:302-1:2008(Heating)	-	0	-
Cl.11 of IS 302-2-30:2007 &IS:302-1:2008(Heating)	-	0	-
Cl.11 of IS 302-2-30:2007 &IS:302-1:2008(Heating)	-	0	-
Cl.11 of IS 302-2-30:2007 &IS:302-1:2008(Heating)	-	0	-
Cl.11 of IS 302-2-30:2007 &IS:302-1:2008(Heating)	-	0	-
Cl.11 of IS 302-2-30:2007 &IS:302-1:2008(Heating)	-	0	-
Cl.11 of IS 302-2-30:2007 &IS:302-1:2008(Heating)	-	0	-
Cl.11 of IS 302-2-30:2007 &IS:302-1:2008(Heating)	-	0	-
Cl.11 of IS 302-2-30:2007 &IS:302-1:2008(Heating)	-	0	-
Cl.11 of IS 302-2-30:2007 &IS:302-1:2008(Heating)	-	0	-
Cl.11 of IS 302-2-30:2007 &IS:302-1:2008(Heating)	-	0	-
Cl.11 of IS 302-2-30:2007 &IS:302-1:2008(Heating)	-	0	-
Cl.11 of IS 302-2-30:2007 &IS:302-1:2008(Heating)	-	0	-
Cl.11 of IS 302-2-30:2007 &IS:302-1:2008(Heating)	-	0	-
Cl.11 of IS 302-2-30:2007 &IS:302-1:2008(Heating)	-	0	-
Cl.11 of IS 302-2-30:2007 &IS:302-1:2008(Heating)	-	0	-
Cl.13 of IS 302-2-30:2007 &IS:302-1:2008(Leakage Current & Electric Strength at operating temp)	-	1000	-
Cl.13 of IS 302-2-30:2007 &IS:302-1:2008(Leakage Current & Electric Strength at operating temp)	-	0	-
Cl.14 of IS 302-2-30:2007 &IS:302-1:2008(Transient Over Voltages)	-	200	-
Cl.14 of IS 302-2-30:2007 &IS:302-1:2008(Transient Over Voltages)	-	0	-
Cl.14 of IS 302-2-30:2007 &IS:302-1:2008(Transient Over Voltages)	-	0	-
Cl.14 of IS 302-2-30:2007 &IS:302-1:2008(Transient Over Voltages)	-	0	-
Cl.15 of IS 302-2-30:2007 &IS:302-1:2008(Moisture Resistance)	-	200	-
Cl.15 of IS 302-2-30:2007 &IS:302-1:2008(Moisture Resistance)	-	0	-
Cl.16 of IS 302-2-30:2007 &IS:302-1:2008(Leakage Current & Electric Strength )	-	1000	-
Cl.16 of IS 302-2-30:2007 &IS:302-1:2008(Leakage Current & Electric Strength )	-	0	-
Cl.18 of IS 302-2-30:2007 (Endurance)	-	200	-
Cl.19 of IS 302-2-30:2007 &IS:302-1:2008(Abnormal Operation)	-	500	-
Cl.19 of IS 302-2-30:2007 &IS:302-1:2008(Abnormal Operation)	-	0	-
Cl.19 of IS 302-2-30:2007 &IS:302-1:2008(Abnormal Operation)	-	0	-
Cl.19 of IS 302-2-30:2007 &IS:302-1:2008(Abnormal Operation)	-	0	-
Cl.19 of IS 302-2-30:2007 &IS:302-1:2008(Abnormal Operation)	-	0	-
Cl.19 of IS 302-2-30:2007 &IS:302-1:2008(Abnormal Operation)	-	0	-
Cl.19 of IS 302-2-30:2007 &IS:302-1:2008(Abnormal Operation)	-	0	-
Cl.19 of IS 302-2-30:2007 &IS:302-1:2008(Abnormal Operation)	-	0	-
Cl.19 of IS 302-2-30:2007 &IS:302-1:2008(Abnormal Operation)	-	0	-
Cl.19 of IS 302-2-30:2007 &IS:302-1:2008(Abnormal Operation)	-	0	-
Cl.19 of IS 302-2-30:2007 &IS:302-1:2008(Abnormal Operation)	-	0	-
Cl.19 of IS 302-2-30:2007 &IS:302-1:2008(Abnormal Operation)	-	0	-
Cl.19 of IS 302-2-30:2007 &IS:302-1:2008(Abnormal Operation)	-	0	-
Cl.19 of IS 302-2-30:2007 &IS:302-1:2008(Abnormal Operation)	-	0	-
Cl.19 of IS 302-2-30:2007 &IS:302-1:2008(Abnormal Operation)	-	0	-
Cl.19 of IS 302-2-30:2007 &IS:302-1:2008(Abnormal Operation)	-	0	-
Cl.19 of IS 302-2-30:2007 &IS:302-1:2008(Abnormal Operation)	-	0	-
Cl.19 of IS 302-2-30:2007 &IS:302-1:2008(Abnormal Operation)	-	0	-
Cl.19 of IS 302-2-30:2007 &IS:302-1:2008(Abnormal Operation)	-	0	-
Cl.19 of IS 302-2-30:2007 &IS:302-1:2008(Abnormal Operation)	-	0	-
Cl.19 of IS 302-2-30:2007 &IS:302-1:2008(Abnormal Operation)	-	0	-
Cl.19 of IS 302-2-30:2007 &IS:302-1:2008(Abnormal Operation)	-	0	-
Cl.19 of IS 302-2-30:2007 &IS:302-1:2008(Abnormal Operation)	-	0	-
Cl.19 of IS 302-2-30:2007 &IS:302-1:2008(Abnormal Operation)	-	0	-
Cl.19 of IS 302-2-30:2007 &IS:302-1:2008(Abnormal Operation)	-	0	-
Cl.20 of IS 302-2-30:2007 &IS:302-1:2008(Stability & Mechanical Hazards)	-	200	-
Cl.21 of IS 302-2-30:2007 &IS:302-1:2008(Mechanical Strength)	-	200	-
Cl.21 of IS 302-2-30:2007 &IS:302-1:2008(Mechanical Strength)	-	0	-
Cl.21 of IS 302-2-30:2007 &IS:302-1:2008(Mechanical Strength)	-	0	-
Cl.21 of IS 302-2-30:2007 &IS:302-1:2008(Mechanical Strength)	-	0	-
Cl.21 of IS 302-2-30:2007 &IS:302-1:2008(Mechanical Strength)	-	0	-
Cl.22 of IS 302-2-30:2007 &IS:302-1:2008(Construction)	-	200	-
Cl.22 of IS 302-2-30:2007 &IS:302-1:2008(Construction)	-	0	-
Cl.22 of IS 302-2-30:2007 &IS:302-1:2008(Construction)	-	0	-
Cl.22 of IS 302-2-30:2007 &IS:302-1:2008(Construction)	-	0	-
Cl.22 of IS 302-2-30:2007 &IS:302-1:2008(Construction)	-	0	-
Cl.22 of IS 302-2-30:2007 &IS:302-1:2008(Construction)	-	0	-
Cl.22 of IS 302-2-30:2007 &IS:302-1:2008(Construction)	-	0	-
Cl.22 of IS 302-2-30:2007 &IS:302-1:2008(Construction)	-	0	-
Cl.22 of IS 302-2-30:2007 &IS:302-1:2008(Construction)	-	0	-
Cl.22 of IS 302-2-30:2007 &IS:302-1:2008(Construction)	-	0	-
Cl.22 of IS 302-2-30:2007 &IS:302-1:2008(Construction)	-	0	-
Cl.22 of IS 302-2-30:2007 &IS:302-1:2008(Construction)	-	0	-
Cl.22 of IS 302-2-30:2007 &IS:302-1:2008(Construction)	-	0	-
Cl.22 of IS 302-2-30:2007 &IS:302-1:2008(Construction)	-	0	-
Cl.23 of IS 302-2-30:2007 &IS:302-1:2008(Internal Wiring)	-	200	-
Cl.23 of IS 302-2-30:2007 &IS:302-1:2008(Internal Wiring)	-	0	-
Cl.23 of IS 302-2-30:2007 &IS:302-1:2008(Internal Wiring)	-	0	-
Cl.23 of IS 302-2-30:2007 &IS:302-1:2008(Internal Wiring)	-	0	-
Cl.23 of IS 302-2-30:2007 &IS:302-1:2008(Internal Wiring)	-	0	-
Cl.24 of IS 302-2-30:2007 &IS:302-1:2008(Component)	-	200	-
Cl.24 of IS 302-2-30:2007 &IS:302-1:2008(Component)	-	0	-
Cl.24 of IS 302-2-30:2007 &IS:302-1:2008(Component)	-	0	-
Cl.24 of IS 302-2-30:2007 &IS:302-1:2008(Component)	-	0	-
Cl.24 of IS 302-2-30:2007 &IS:302-1:2008(Component)	-	0	-
Cl.24 of IS 302-2-30:2007 &IS:302-1:2008(Component)	-	0	-
Cl.24 of IS 302-2-30:2007 &IS:302-1:2008(Component)	-	0	-
Cl.24 of IS 302-2-30:2007 &IS:302-1:2008(Component)	-	0	-
Cl.24 of IS 302-2-30:2007 &IS:302-1:2008(Component)	-	0	-
Cl.24 of IS 302-2-30:2007 &IS:302-1:2008(Component)	-	0	-
Cl.25 of IS 302-2-30:2007 &IS:302-1:2008(Supply Connection and External Flexible Cords )	-	200	-
Cl.25 of IS 302-2-30:2007 &IS:302-1:2008(Supply Connection and External Flexible Cords )	-	0	-
Cl.25 of IS 302-2-30:2007 &IS:302-1:2008(Supply Connection and External Flexible Cords )	-	0	-
Cl.25 of IS 302-2-30:2007 &IS:302-1:2008(Supply Connection and External Flexible Cords )	-	0	-
Cl.25 of IS 302-2-30:2007 &IS:302-1:2008(Supply Connection and External Flexible Cords )	-	0	-
Cl.25 of IS 302-2-30:2007 &IS:302-1:2008(Supply Connection and External Flexible Cords )	-	0	-
Cl.25 of IS 302-2-30:2007 &IS:302-1:2008(Supply Connection and External Flexible Cords )	-	0	-
Cl.25 of IS 302-2-30:2007 &IS:302-1:2008(Supply Connection and External Flexible Cords )	-	0	-
Cl.25 of IS 302-2-30:2007 &IS:302-1:2008(Supply Connection and External Flexible Cords )	-	0	-
Cl.25 of IS 302-2-30:2007 &IS:302-1:2008(Supply Connection and External Flexible Cords )	-	0	-
Cl.25 of IS 302-2-30:2007 &IS:302-1:2008(Supply Connection and External Flexible Cords )	-	0	-
Cl.25 of IS 302-2-30:2007 &IS:302-1:2008(Supply Connection and External Flexible Cords )	-	0	-
Cl.25 of IS 302-2-30:2007 &IS:302-1:2008(Supply Connection and External Flexible Cords )	-	0	-
Cl.26 of IS 302-2-30:2007 &IS:302-1:2008(Terminal for External Conductors)	-	200	-
Cl.27 of IS 302-2-30:2007 &IS:302-1:2008(Provision for Earthing)	-	500	-
Cl.27 of IS 302-2-30:2007 &IS:302-1:2008(Provision for Earthing)	-	0	-
Cl.28 of IS 302-2-30:2007 &IS:302-1:2008(Screws and Connections)	-	200	-
Cl.29 of IS 302-2-30:2007 &IS:302-1:2008(Clearances, Creepage Distances and Solid Insulation.)	-	200	-
Cl.29 of IS 302-2-30:2007 &IS:302-1:2008(Clearances, Creepage Distances and Solid Insulation.)	-	0	-
Cl.30 of IS 302-2-30:2007 &IS:302-1:2008(Resistance to Heat and Fire.)	-	200	-
Cl.30 of IS 302-2-30:2007 &IS:302-1:2008(Resistance to Heat and Fire.)	-	0	-
Cl.31 of IS 302-2-30:2007 &IS:302-1:2008(Resistance to Rusting)	-	200	-
Cl.7 of IS 369:2019(Dimensions)	-	500	-
Cl.7 of IS 369:2019(Dimensions)	-	0	-
Cl.7 of IS 369:2019(Dimensions)	-	0	-
Cl.8 of IS 369:2019(Temperature rises of air-outlet grilles and external surfaces)	-	700	-
Cl.8 of IS 369:2019(Temperature rises of air-outlet grilles and external surfaces)	-	700	-
Cl.8 of IS 369:2019(Temperature rises of air-outlet grilles and external surfaces)	-	800	-
Cl.9 of IS 369:2019(Temperature rises of surfaces surrounding the heater)	-	800	-
Cl.9 of IS 369:2019(Temperature rises of surfaces surrounding the heater)	-	0	-
Cl.9 of IS 369:2019(Temperature rises of surfaces surrounding the heater)	-	0	-
Cl.9 of IS 369:2019(Temperature rises of surfaces surrounding the heater)	-	0	-
Cl.9 of IS 369:2019(Temperature rises of surfaces surrounding the heater)	-	0	-
Cl.9 of IS 369:2019(Temperature rises of surfaces surrounding the heater)	-	0	-
Cl.10 of IS 369:2019(Warming-up time of the heater)	-	700	-
Cl.11 of IS 369:2019(Stability of room temperature)	-	700	-
Cl.11 of IS 369:2019(Stability of room temperature)	-	0	-
Cl.11 of IS 369:2019(Stability of room temperature)	-	0	-
Cl.11 of IS 369:2019(Stability of room temperature)	-	0	-
Cl.12 of IS 369:2019(Set-back)	-	700	-
Cl.13 of IS 369:2019(Frost protection temperature)	-	500	-
Cl.14 of IS 369:2019(Inrush current)	-	500	-
Cl.15 of IS 369:2019(Effect of radiant heat)	-	500	-
Cl.15 of IS 369:2019(Effect of radiant heat)	-	500	-
Cl.15 of IS 369:2019(Effect of radiant heat)	-	0	-
Cl.16 of IS 369:2019(Usable power)	-	500	-
Cl.17 of IS 302-2-30:2007(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	500	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008(Marking and Instructions)	-	0	-

03 Oct, 2027

-
Included.w.e.f.26.11.2024

IS 368 (2014)

Electric immersion water heaters - Specification (Fifth Revision)

-----

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.6 of IS 302-‐2-‐201:2008(Classification)	-	500	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	50	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	50	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	50	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	50	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	50	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	50	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	50	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	50	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	50	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	50	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	50	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	50	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	50	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	50	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	50	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	50	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	50	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	50	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	50	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	50	-
Cl.8 of IS 302‐2-201: 2008(Protection Against Access to Live Parts)	-	500	-
Cl.10 of IS 302‐2‐201:2008(Power Input and Current )	-	2000	-
Cl.11 of IS 302-2201: 2008(Heating)	-	1500	-
Cl.11 of IS 302-2201: 2008(Heating)	-	50	-
Cl.11 of IS 302-2201: 2008(Heating)	-	50	-
Cl.11 of IS 302-2201: 2008(Heating)	-	50	-
Cl.11 of IS 302-2201: 2008(Heating)	-	50	-
Cl.11 of IS 302-2201: 2008(Heating)	-	50	-
Cl.11 of IS 302-2201: 2008(Heating)	-	50	-
Cl.11 of IS 302-2201: 2008(Heating)	-	50	-
Cl.11 of IS 302-2201: 2008(Heating)	-	50	-
Cl.11 of IS 302-2201: 2008(Heating)	-	50	-
Cl.11 of IS 302-2201: 2008(Heating)	-	50	-
Cl. 12 of IS 368:2014(Operation under overload conditions of appliances with heating elements)	-	500	-
Cl.13 of IS 302-2-201: 2008(Leakage Current & Electric Strength at Operating Temperature)	-	1500	-
Cl.13 of IS 302-2-201: 2009(Leakage Current & Electric Strength at Operating Temperature)	-	50	-
Cl.14 of IS 302‐2-201:2008(Transient Over Voltages )	-	1000	-
Cl.15 of IS 302-2-201:2008(Moisture Resistance )	-	1000	-
Cl.15 of IS 302-2-201:2008(Moisture Resistance )	-	0	-
Cl.16 of IS 302-2-201:2008(Leakage Current & Electric Strength)	-	1500	-
Cl.16 of IS 302-2-201:2008(Leakage Current & Electric Strength)	-	50	-
Cl.17 of IS 302‐2-201: 2008(Overload Protection of Transformers & Associated Circuits)	-	500	-
Cl.18 of IS 368:2014(Endurance)	-	1000	-
Cl.19 of IS 302‐2-201: 2008(Abnormal Operation )	-	1500	-
Cl.19 of IS 302‐2-201: 2008(Abnormal Operation )	-	50	-
Cl.19 of IS 302‐2-201: 2008(Abnormal Operation )	-	50	-
Cl.19 of IS 302‐2-201: 2008(Abnormal Operation )	-	50	-
Cl.19 of IS 302‐2-201: 2008(Abnormal Operation )	-	50	-
Cl.20 of IS 302-2-201: 2008(Stability & Mechanical Hazards)	-	500	-
Cl.21 of IS 302-2-201: 2008(Mechanical Strength )	-	500	-
Cl.21 of IS 302-2-201: 2008(Mechanical Strength )	-	50	-
Cl.21 of IS 302-2-201: 2008(Mechanical Strength )	-	50	-
Cl.22 of IS 302-2-201: 2008(Construction)	-	500	-
Cl.22 of IS 302-2-201: 2008(Construction)	-	50	-
Cl.22 of IS 302-2-201: 2008(Construction)	-	50	-
Cl.22 of IS 302-2-201: 2008(Construction)	-	50	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	500	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	50	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	50	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	50	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	50	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	50	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	50	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	50	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	50	-
Cl.24 of IS 302-2-201: 2008(Component)	-	500	-
Cl.24 of IS 302-2-201: 2008(Component)	-	50	-
Cl.24 of IS 302-2-201: 2008(Component)	-	50	-
Cl.24 of IS 302-2-201: 2008(Component)	-	50	-
Cl.24 of IS 302-2-201: 2008(Component)	-	50	-
Cl.24 of IS 302-2-201: 2008(Component)	-	50	-
Cl.24 of IS 302-2-201: 2008(Component)	-	50	-
Cl.24 of IS 302-2-201: 2008(Component)	-	50	-
Cl.24 of IS 302-2-201: 2008(Component)	-	50	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	500	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	50	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	50	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	50	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	50	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	50	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	50	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	50	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	50	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	50	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	50	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	50	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	50	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	50	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	50	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	50	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	50	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	50	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	50	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	50	-
Cl.26 of IS 302-2-201: 2008(Terminals for External Conductors)	-	500	-
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	1000	-
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	50	-
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	50	-
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	50	-
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	50	-
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	50	-
Cl.28 of IS 302-2-201: 2008(Screws & Connections )	-	500	-
Cl.29 of IS 302-2‐201:2008(Clearances, Creepage Distances and Solid Insulation )	-	1000	-
Cl.29 of IS 302-2‐201:2008(Clearances, Creepage Distances and Solid Insulation )	-	50	-
Cl.30 of IS 302-2‐201:2008(Resistance to Heat and Fire )	-	700	-
Cl.30 of IS 302-2‐201:2008(Resistance to Heat and Fire )	-	100	-
Cl.31 of IS 302-2-201:2008(Resistance of Rusting )	-	500	-
4(GENERAL REQUIREMENT)	-	50	-
5(GENERAL CONDITIONS FOR THE TESTS)	-	50	-

03 Oct, 2027

-
Included.w.e.f.09.11.2024 Exclusion 32 (RADIATION, TOXICITY AND SIMILAR HAZARDS) 19.11.4.1 to 19.11.4.5 (EMI/EMC)

IS 4159 (2021)

Mineral Filled Sheathed Heating Elements

----

14800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
"Cl. 6 IS 4159:2021"(Classification)	-	100	-
"Cl. 8 IS 4159:2021"(Protection against access to live parts)	-	500	-
"Cl. 9 IS 4159:2021"(Starting of motor operated appliances)	-	100	-
"Cl. 10 IS 4159:2021"(Power Input and Current)	-	1500	-
"Cl. 11 IS 4159:2021"(Heating)	-	1000	-
"Cl. 13 IS 4159:2021"(Leakage Current & Electrical Strength at Operating Temperature)	-	1000	-
"Cl. 14 IS 4159:2021"(Transient Over Voltage)	-	500	-
"Cl. 15 IS 4159:2021"(Moisture Resistance)	-	500	-
"Cl. 16 IS 4159:2021"(Leakage Current and Electric strength)	-	1000	-
"Cl. 17 IS 4159:2021"(Overload protection of transformers and associated circuits.)	-	100	-
"Cl. 18 IS 4159:2021"(Endurance)	-	500	-
"Cl. 19 IS 4159:2021"(Abnormal Operation)	-	500	-
"Cl. 20 IS 4159:2021"(Stability and mechanical Hazards)	-	200	-
"Cl. 21 IS 4159:2021"(Mechanical Strength)	-	200	-
"Cl. 22 IS 4159:2021"(Construction)	-	500	-
"Cl. 23 IS 4159:2021"(Internal Wiring)	-	500	-
"Cl. 24 IS 4159:2021"(Components)	-	500	-
"Cl. 25 IS 4159:2021"(Supply Connections and External Flexible Cables and Cords)	-	200	-
"Cl. 26 IS 4159:2021"(Terminal For External Conductors)	-	200	-
"Cl. 27 IS 4159:2021"(Provision For Earthing)	-	500	-
"Cl. 28 IS 4159:2021"(Screws and Connections)	-	200	-
"Cl. 29 IS 4159:2021"(Creepage Distances, Clearances And Distances Through Insulation)	-	500	-
"Cl. 30 IS 4159:2021"(Resistance To Heat, Fire And Tracking)	-	500	-
"Cl. 31 IS 4159:2021"(Resistance To Rusting)	-	500	-
"Cl. 102 IS 4159:2021"(Leakage and hydrostatic strength (for oil heating elements))	-	50	-
Cl.22.106(CONSTRUCTION)	-	100	-
Cl.7.1 of IS 4159:2021(Marking)	-	50	-
Cl.7.1 of IS 4159:2021(Marking)	-	50	-
Cl.7.1 of IS 4159:2021(Marking)	-	50	-
Cl.7.1 of IS 4159:2021(Marking)	-	50	-
Cl.7.1 of IS 4159:2021(Marking)	-	50	-
Cl.7.1 of IS 4159:2021(Marking)	-	50	-
Cl.7.2 of IS 4159:2021(Marking)	-	50	-
Cl.7.3 of IS 4159:2021(Marking)	-	50	-
Cl.10 of IS 302-1:2008(Power Input & Current)	-	0	-
Cl.11 of IS 4159:2021 & IS 302‐1:2008(Heating)	-	0	-
Cl.11 of IS 4159:2021 & IS 302‐1:2008(Heating)	-	0	-
Cl.11.2 of IS 4159:2021(Heating)	-	0	-
Cl.11.101 of IS 4159:2021(Heating)	-	0	-
Cl.18 of IS 4159:2021(Endurance Test)	-	50	-
Cl.19.2 of IS 302-1: 2008(Abnormal Operation)	-	50	-
Cl.19.3 of IS 302-1: 2008(Abnormal Operation)	-	50	-
Cl.19.13 IS 302-1: 2008(Abnormal Operation)	-	50	-
Cl.19.13 IS 302-1: 2008(Abnormal Operation)	-	0	-
Cl.19.13 IS 302-1: 2008(Abnormal Operation)	-	0	-
Cl.22.101 of IS 4159:2021(Construction)	-	50	-
Cl.22.102 of IS 4159:2021(Construction)	-	50	-
Cl.22.103 of IS 4159:2021(Construction)	-	50	-
Cl.22.104 of IS 4159:2021(Construction)	-	50	-
Cl.22.105 of IS 4159:2021(Construction)	-	50	-
Cl.22.106 of IS 4159:2021(Construction)	-	50	-
Cl.22.107 of IS 4159:2021(Construction)	-	50	-
Cl.22.108 of IS 4159:2021(Construction)	-	50	-
Cl.22.109 of IS 4159:2021(Construction)	-	50	-
Cl.22.110 of IS 4159:2021(Construction)	-	50	-
Cl.22.111 of IS 4159:2021(Construction)	-	50	-
Cl.27 & IS 302-1: 2008(Provision for Earthing)	-	1000	-
Cl.27 & IS 302-1: 2008(Provision for Earthing)	-	0	-
Cl.28.1 & IS 302-1: 2008(Screws & Connection)	-	100	-
Cl.28.4 IS 302-1: 2008(Screws & Connection)	-	100	-
Cl. 29.1 & IS 302-1: 2008(Creepage Distances & Clearances)	-	500	-
Cl. 29.2 & IS 302-1: 2009(Creepage Distances & Clearances)	-	50	-
"Cl. 6 IS 4159:2021"(Classification)	-	100	-
"Cl. 8 IS 4159:2021"(Protection against access to live parts)	-	500	-
"Cl. 9 IS 4159:2021"(Starting of motor operated appliances)	-	0	-
"Cl. 10 IS 4159:2021"(Power Input and Current)	-	1200	-
"Cl. 11 IS 4159:2021"(Heating)	-	1000	-
"Cl. 13 IS 4159:2021"(Leakage Current & Electrical Strength at Operating Temperature)	-	1000	-
"Cl. 14 IS 4159:2021"(Transient Over Voltage)	-	500	-
"Cl. 15 IS 4159:2021"(Moisture Resistance)	-	500	-
"Cl. 16 IS 4159:2021"(Leakage Current and Electric strength)	-	500	-
"Cl. 17 IS 4159:2021"(Overload protection of transformers and associated circuits.)	-	200	-
"Cl. 18 IS 4159:2021"(Endurance)	-	0	-
"Cl. 19 IS 4159:2021"(Abnormal Operation)	-	500	-
"Cl. 20 IS 4159:2021"(Stability and mechanical Hazards)	-	200	-
"Cl. 21 IS 4159:2021"(Mechanical Strength)	-	200	-
"Cl. 22 IS 4159:2021"(Construction)	-	500	-
"Cl. 23 IS 4159:2021"(Internal Wiring)	-	500	-
"Cl. 24 IS 4159:2021"(Components)	-	200	-
"Cl. 25 IS 4159:2021"(Supply Connections and External Flexible Cables and Cords)	-	500	-
"Cl. 26 IS 4159:2021"(Terminal For External Conductors)	-	200	-
"Cl. 27 IS 4159:2021"(Provision For Earthing)	-	500	-
"Cl. 28 IS 4159:2021"(Screws and Connections)	-	200	-
"Cl. 29 IS 4159:2021"(Creepage Distances, Clearances And Distances Through Insulation)	-	500	-
"Cl. 30 IS 4159:2021"(Resistance To Heat, Fire And Tracking)	-	500	-
"Cl. 31 IS 4159:2021"(Resistance To Rusting)	-	200	-
"Cl. 102 IS 4159:2021"(Leakage and hydrostatic strength (for oil heating elements))	-	500	-
Cl.22.106(CONSTRUCTION)	-	50	-
Cl.7.1 of IS 4159:2021(Marking)	-	200	-
Cl.7.1 of IS 4159:2021(Marking)	-	0	-
Cl.7.1 of IS 4159:2021(Marking)	-	0	-
Cl.7.1 of IS 4159:2021(Marking)	-	0	-
Cl.7.1 of IS 4159:2021(Marking)	-	0	-
Cl.7.1 of IS 4159:2021(Marking)	-	0	-
Cl.7.2 of IS 4159:2021(Marking)	-	0	-
Cl.7.3 of IS 4159:2021(Marking)	-	0	-
Cl.10 of IS 302-1:2008(Power Input & Current)	-	0	-
Cl.11 of IS 4159:2021 & IS 302‐1:2008(Heating)	-	1000	-
Cl.11 of IS 4159:2021 & IS 302‐1:2008(Heating)	-	0	-
Cl.11.2 of IS 4159:2021(Heating)	-	0	-
Cl.11.101 of IS 4159:2021(Heating)	-	0	-
Cl.18 of IS 4159:2021(Endurance Test)	-	500	-
Cl.19.2 of IS 302-1: 2008(Abnormal Operation)	-	500	-
Cl.19.3 of IS 302-1: 2008(Abnormal Operation)	-	0	-
Cl.19.13 IS 302-1: 2008(Abnormal Operation)	-	0	-
Cl.19.13 IS 302-1: 2008(Abnormal Operation)	-	0	-
Cl.19.13 IS 302-1: 2008(Abnormal Operation)	-	0	-
Cl.22.101 of IS 4159:2021(Construction)	-	500	-
Cl.22.102 of IS 4159:2021(Construction)	-	0	-
Cl.22.103 of IS 4159:2021(Construction)	-	0	-
Cl.22.104 of IS 4159:2021(Construction)	-	0	-
Cl.22.105 of IS 4159:2021(Construction)	-	0	-
Cl.22.106 of IS 4159:2021(Construction)	-	0	-
Cl.22.107 of IS 4159:2021(Construction)	-	0	-
Cl.22.108 of IS 4159:2021(Construction)	-	0	-
Cl.22.109 of IS 4159:2021(Construction)	-	0	-
Cl.22.110 of IS 4159:2021(Construction)	-	0	-
Cl.22.111 of IS 4159:2021(Construction)	-	0	-
Cl.27 & IS 302-1: 2008(Provision for Earthing)	-	500	-
Cl.27 & IS 302-1: 2008(Provision for Earthing)	-	0	-
Cl.28.1 & IS 302-1: 2008(Screws & Connection)	-	200	-
Cl.28.4 IS 302-1: 2008(Screws & Connection)	-	0	-
Cl. 29.1 & IS 302-1: 2008(Creepage Distances & Clearances)	-	500	-
Cl. 29.2 & IS 302-1: 2009(Creepage Distances & Clearances)	-	0	-

03 Oct, 2027

-
Included.w.e.f.26.11.2024 Exclusion - 19.11.4.1 to 19.11.4.7 (EMI/EMC)

IS 302 : Part 2 : Sec 14 (2009)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 14 electric kitchen machines (First Revision)

-----

15400 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Classification- IS 302-1 )	-	50	-
6(Classification- IS 302-1)	-	50	-
7.1(Marking- IS 302-1)	-	50	-
7.1(Marking- IS 302-1)	-	50	-
7.1(Marking- IS 302-1)	-	50	-
7.1(Marking- IS 302-1)	-	50	-
7.1(Marking- IS 302-1)	-	50	-
7.1(Marking- IS 302-1)	-	50	-
7.1(Marking- IS 302-1)	-	50	-
7.3(Marking- IS 302-1)	-	50	-
7.4(Marking- IS 302-1)	-	50	-
7.6(Marking- IS 302-1)	-	50	-
7.7(Marking- IS 302-1)	-	50	-
7.8(Marking- IS 302-1)	-	50	-
7.11(Marking- IS 302-1)	-	50	-
7.12(Marking- IS 302-1)	-	50	-
7.13(Marking- IS 302-1)	-	50	-
7.14(Marking- IS 302-1)	-	50	-
7.15(Marking- IS 302-1)	-	200	-
7.101(Marking)	-	50	-
8( Protection Against Electric Shock, IS 302-1)	-	500	-
10(Power Input and Current, IS 302-1)	-	1000	-
11(Heating, IS 302-1)	-	500	-
11(Heating, IS 302-1)	-	50	-
11(Heating, IS 302-1)	-	50	-
11(Heating, IS 302-1)	-	50	-
11(Heating, IS 302-1)	-	50	-
13(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	500	-
13(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	50	-
14(Transient Over Voltages, IS 302-1)	-	500	-
15.1(Moisture Resistance, IS 302-1)	-	500	-
15.2(Moisture Resistance, IS 302-1)	-	500	-
15(Moisture Resistance, IS 302-1)	-	50	-
16(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	1000	-
16(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	100	-
17(Overload protection of Transformers and Associated Circuits, IS 302-1)	-	150	-
17(Overload protection of Transformers and Associated Circuits, IS 302-1)	-	50	-
19.7(Abnormal Operation, IS 302-1)	-	500	-
19.8(Abnormal Operation, IS 302-1)	-	50	-
19.9(Abnormal Operation, IS 302-1)	-	50	-
19.1(Abnormal Operation, IS 302-1)	-	50	-
19.101(Abnormal Operation)	-	50	-
19.102(Abnormal Operation)	-	50	-
20.1(Stability & Mechanical Hazards, IS 302-1)	-	500	-
20.2(Stability & Mechanical Hazards, IS 302-1)	-	50	-
20.101(Stability & Mechanical Hazards)	-	50	-
20.102(Stability & Mechanical Hazards)	-	50	-
20.103(Stability & Mechanical Hazards)	-	50	-
20.104(Stability & Mechanical Hazards)	-	50	-
20.105(Stability & Mechanical Hazards)	-	50	-
20.106(Stability & Mechanical Hazards)	-	50	-
20.107(Stability & Mechanical Hazards)	-	50	-
20.108(Stability & Mechanical Hazards)	-	50	-
20.109(Stability & Mechanical Hazards)	-	50	-
20.110(Stability & Mechanical Hazards)	-	50	-
20.111(Stability & Mechanical Hazards)	-	50	-
20.112(Stability & Mechanical Hazards)	-	50	-
20.113(Stability & Mechanical Hazards)	-	50	-
20.114(Stability & Mechanical Hazards)	-	50	-
20.115(Stability & Mechanical Hazards)	-	50	-
20.116(Stability & Mechanical Hazards)	-	50	-
21.1(Mechanical Strength, IS 302-1)	-	500	-
21.2(Mechanical Strength, IS 302-1)	-	50	-
22(Construction, IS 302-1)	-	500	-
22.101(Construction)	-	50	-
22.102(Construction)	-	50	-
23.1(Internal Wiring, IS 302-1)	-	50	-
23.2(Internal Wiring, IS 302-1)	-	50	-
23.3(Internal Wiring, IS 302-1)	-	50	-
23.4(Internal Wiring, IS 302-1)	-	50	-
23.5(Internal Wiring, IS 302-1)	-	50	-
23.6(Internal Wiring, IS 302-1)	-	50	-
23.7(Internal Wiring, IS 302-1)	-	50	-
23.8(Internal Wiring, IS 302-1)	-	50	-
23.9(Internal Wiring, IS 302-1)	-	50	-
23.10(Internal Wiring, IS 302-1)	-	50	-
24.1(Components, IS 302-1)	-	500	-
24.2(Components, IS 302-1)	-	50	-
24.5(Components, IS 302-1)	-	50	-
24.6(Components, IS 302-1)	-	50	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.5(Supply Connection and External Flexible Cords, IS 302-1)	-	50	-
25.6(Supply Connection and External Flexible Cords, IS 302-1)	-	50	-
25.7(Supply Connection and External Flexible Cords, IS 302-1)	-	50	-
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	50	-
26.9(Supply Connection and External Flexible Cords, IS 302-1)	-	50	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	50	-
25.11(Supply Connection and External Flexible Cords, IS 302-1)	-	50	-
25.12(Supply Connection and External Flexible Cords, IS 302-1)	-	50	-
25.13(Supply Connection and External Flexible Cords, IS 302-1)	-	50	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	50	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	50	-
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	50	-
25.16(Supply Connection and External Flexible Cords, IS 302-1)	-	50	-
25.17(Supply Connection and External Flexible Cords, IS 302-1)	-	50	-
25.18(Supply Connection and External Flexible Cords, IS 302-1)	-	50	-
25.19(Supply Connection and External Flexible Cords, IS 302-1)	-	50	-
25.2(Supply Connection and External Flexible Cords, IS 302-1)	-	50	-
25.21(Supply Connection and External Flexible Cords, IS 302-1)	-	50	-
25.22(Supply Connection and External Flexible Cords, IS 302-1)	-	50	-
26(Terminals for External Conductors, IS 302-1)	-	50	-
27(Provision for Earthing, IS 302-1)	-	500	-
27.2(Provision for Earthing, IS 302-1)	-	50	-
27.3(Provision for Earthing, IS 302-1)	-	50	-
27.4(Provision for Earthing, IS 302-1)	-	50	-
27.5(Provision for Earthing, IS 302-1)	-	50	-
28(Screws & Connections, IS 302-1)	-	100	-
29.1(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	100	-
29.2(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	50	-
30.1(Resistance to Heat and Fire, IS 302-1)	-	500	-
30.2(Resistance to Heat and Fire, IS 302-1)	-	50	-
31(Resistance of Rusting, IS 302-1)	-	500	-
4(GENERAL REQUIREMENTS)	-	50	-
5(GENERAL CONDITIONS FOR THE TESTS)	-	50	-
27(Provision for Earthing)	-	50	-
29(Clearances, Creepage distances and Solid Insulation)	-	50	-
7.1(Marking- IS 302-1)	-	50	-
6(Classification- IS 302-1 )	-	50	-
6(Classification- IS 302-1)	-	50	-
7.1(Marking- IS 302-1)	-	50	-
7.1(Marking- IS 302-1)	-	50	-
7.1(Marking- IS 302-1)	-	50	-
7.1(Marking- IS 302-1)	-	50	-
7.1(Marking- IS 302-1)	-	50	-
7.1(Marking- IS 302-1)	-	50	-
7.1(Marking- IS 302-1)	-	50	-
7.3(Marking- IS 302-1)	-	50	-
7.4(Marking- IS 302-1)	-	50	-
7.6(Marking- IS 302-1)	-	50	-
7.7(Marking- IS 302-1)	-	50	-
7.8(Marking- IS 302-1)	-	50	-
7.11(Marking- IS 302-1)	-	50	-
7.12(Marking- IS 302-1)	-	50	-
7.13(Marking- IS 302-1)	-	50	-
7.14(Marking- IS 302-1)	-	50	-
7.15(Marking- IS 302-1)	-	200	-
7.101(Marking)	-	50	-
8( Protection Against Electric Shock, IS 302-1)	-	500	-
10(Power Input and Current, IS 302-1)	-	1000	-
11(Heating, IS 302-1)	-	500	-
11(Heating, IS 302-1)	-	50	-
11(Heating, IS 302-1)	-	50	-
11(Heating, IS 302-1)	-	50	-
11(Heating, IS 302-1)	-	50	-
13(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	500	-
13(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	50	-
14(Transient Over Voltages, IS 302-1)	-	500	-
15.1(Moisture Resistance, IS 302-1)	-	500	-
15.2(Moisture Resistance, IS 302-1)	-	500	-
15(Moisture Resistance, IS 302-1)	-	50	-
16(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	1000	-
16(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	100	-
17(Overload protection of Transformers and Associated Circuits, IS 302-1)	-	150	-
17(Overload protection of Transformers and Associated Circuits, IS 302-1)	-	50	-
19.7(Abnormal Operation, IS 302-1)	-	500	-
19.8(Abnormal Operation, IS 302-1)	-	50	-
19.9(Abnormal Operation, IS 302-1)	-	50	-
19.1(Abnormal Operation, IS 302-1)	-	50	-
19.101(Abnormal Operation)	-	50	-
19.102(Abnormal Operation)	-	50	-
20.1(Stability & Mechanical Hazards, IS 302-1)	-	500	-
20.2(Stability & Mechanical Hazards, IS 302-1)	-	50	-
20.101(Stability & Mechanical Hazards)	-	50	-
20.102(Stability & Mechanical Hazards)	-	50	-
20.103(Stability & Mechanical Hazards)	-	50	-
20.104(Stability & Mechanical Hazards)	-	50	-
20.105(Stability & Mechanical Hazards)	-	50	-
20.106(Stability & Mechanical Hazards)	-	50	-
20.107(Stability & Mechanical Hazards)	-	50	-
20.108(Stability & Mechanical Hazards)	-	50	-
20.109(Stability & Mechanical Hazards)	-	50	-
20.110(Stability & Mechanical Hazards)	-	50	-
20.111(Stability & Mechanical Hazards)	-	50	-
20.112(Stability & Mechanical Hazards)	-	50	-
20.113(Stability & Mechanical Hazards)	-	50	-
20.114(Stability & Mechanical Hazards)	-	50	-
20.115(Stability & Mechanical Hazards)	-	50	-
20.116(Stability & Mechanical Hazards)	-	50	-
21.1(Mechanical Strength, IS 302-1)	-	500	-
21.2(Mechanical Strength, IS 302-1)	-	50	-
22(Construction, IS 302-1)	-	500	-
22.101(Construction)	-	50	-
22.102(Construction)	-	50	-
23.1(Internal Wiring, IS 302-1)	-	50	-
23.2(Internal Wiring, IS 302-1)	-	50	-
23.3(Internal Wiring, IS 302-1)	-	50	-
23.4(Internal Wiring, IS 302-1)	-	50	-
23.5(Internal Wiring, IS 302-1)	-	50	-
23.6(Internal Wiring, IS 302-1)	-	50	-
23.7(Internal Wiring, IS 302-1)	-	50	-
23.8(Internal Wiring, IS 302-1)	-	50	-
23.9(Internal Wiring, IS 302-1)	-	50	-
23.10(Internal Wiring, IS 302-1)	-	50	-
24.1(Components, IS 302-1)	-	500	-
24.2(Components, IS 302-1)	-	50	-
24.5(Components, IS 302-1)	-	50	-
24.6(Components, IS 302-1)	-	50	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.5(Supply Connection and External Flexible Cords, IS 302-1)	-	50	-
25.6(Supply Connection and External Flexible Cords, IS 302-1)	-	50	-
25.7(Supply Connection and External Flexible Cords, IS 302-1)	-	50	-
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	50	-
26.9(Supply Connection and External Flexible Cords, IS 302-1)	-	50	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	50	-
25.11(Supply Connection and External Flexible Cords, IS 302-1)	-	50	-
25.12(Supply Connection and External Flexible Cords, IS 302-1)	-	50	-
25.13(Supply Connection and External Flexible Cords, IS 302-1)	-	50	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	50	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	50	-
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	50	-
25.16(Supply Connection and External Flexible Cords, IS 302-1)	-	50	-
25.17(Supply Connection and External Flexible Cords, IS 302-1)	-	50	-
25.18(Supply Connection and External Flexible Cords, IS 302-1)	-	50	-
25.19(Supply Connection and External Flexible Cords, IS 302-1)	-	50	-
25.2(Supply Connection and External Flexible Cords, IS 302-1)	-	50	-
25.21(Supply Connection and External Flexible Cords, IS 302-1)	-	50	-
25.22(Supply Connection and External Flexible Cords, IS 302-1)	-	50	-
26(Terminals for External Conductors, IS 302-1)	-	50	-
27(Provision for Earthing, IS 302-1)	-	500	-
27.2(Provision for Earthing, IS 302-1)	-	50	-
27.3(Provision for Earthing, IS 302-1)	-	50	-
27.4(Provision for Earthing, IS 302-1)	-	50	-
27.5(Provision for Earthing, IS 302-1)	-	50	-
28(Screws & Connections, IS 302-1)	-	100	-
29.1(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	100	-
29.2(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	50	-
30.1(Resistance to Heat and Fire, IS 302-1)	-	500	-
30.2(Resistance to Heat and Fire, IS 302-1)	-	50	-
31(Resistance of Rusting, IS 302-1)	-	500	-
4(GENERAL REQUIREMENTS)	-	50	-
5(GENERAL CONDITIONS FOR THE TESTS)	-	50	-
27(Provision for Earthing)	-	50	-
29(Clearances, Creepage distances and Solid Insulation)	-	50	-
7.1(Marking- IS 302-1)	-	50	-

03 Oct, 2027

-
Included w.e.f.18.11.2024 Exclusion 32 (Radiation, Toxicity and similar Hazard IS 302-1) 19.11.4.1 to 19.11.4.5 (EMI/EMC)

IS 302 : Part 2 : Sec 23 (2009)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 23 appliances for skin or hair care (First Revision)

-----

22000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
31(Resistance to Rusting)	-	1000	-
30(Resistance to Heat & Fire)	-	1000	-
29(Clearances, Creepage Distances & Solid Insulation)	-	1500	-
28(Screws & Connection)	-	500	-
27(Provision For Earthing)	-	1500	-
26(Terminals For External Conductors)	-	500	-
25(Supply Connection & External Flexible Cables and Cords)	-	500	-
24(Component)	-	500	-
23(Internal wiring)	-	500	-
22(Construction)	-	500	-
21(Mechanical strength)	-	500	-
20(Stability & Mechanical Hazards)	-	500	-
19(Abnormal Operation)	-	1500	-
18(Endurance)	-	500	-
17(Overload Protection/ Overload Protection of Transformers & Associated Circuits)	-	500	-
16(Leakage Current and Electric Strength)	-	1000	-
15(Moisture Resistance)	-	1000	-
14(Transient Over Voltage)	-	1000	-
13(Leakage Current and Electric Strength at Operating Temperature)	-	1000	-
11(Temperature Rise/Heating)	-	1500	-
10(Power Input & Current)	-	2500	-
9(Starting Of Motor Operated Appliances)	-	500	-
8(Protection against Electric Shock/ Protection against Access to Live Parts)	-	500	-
7(Marking/ Marking & Instructions)	-	500	-
6(Classification)	-	500	-
22.32(CONSTRUCTION)	-	500	-

03 Oct, 2027

-
Included.w.e.f.07.11.2024 Exclusion 32 (RADIATION, TOXICITY AND SIMILAR HAZARDS) 19.11.4.1 to 19.11.4.5 (EMI/EMC)

IS 302 : Part 2 : Sec 201 (2008)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 201 electric immersion water heaters (First Revision)

-----

13500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.6 of IS 302-‐2-‐201:2008(Classification)	-	200	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	200	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.8 of IS 302‐2-201: 2008(Protection Against Access to Live Parts)	-	500	-
Cl.10 of IS 302‐2‐201:2008(Power Input and Current )	-	1500	-
Cl.11 of IS 302-2201: 2008(Heating)	-	1000	-
Cl.11 of IS 302-2201: 2008(Heating)	-	0	-
Cl.11 of IS 302-2201: 2008(Heating)	-	0	-
Cl.11 of IS 302-2201: 2008(Heating)	-	0	-
Cl.11 of IS 302-2201: 2008(Heating)	-	0	-
Cl.11 of IS 302-2201: 2008(Heating)	-	0	-
Cl.11 of IS 302-2201: 2008(Heating)	-	0	-
Cl.11 of IS 302-2201: 2008(Heating)	-	0	-
Cl.11 of IS 302-2201: 2008(Heating)	-	0	-
Cl.11 of IS 302-2201: 2008(Heating)	-	0	-
Cl.11 of IS 302-2201: 2008(Heating)	-	0	-
Cl.13 of IS 302-2-201: 2008(Leakage Current & Electric Strength at Operating Temperature)	-	1000	-
Cl.14 of IS 302‐2-201:2008(Transient Over Voltages )	-	500	-
Cl.15 of IS 302-2-201:2008(Moisture Resistance )	-	1000	-
Cl.15 of IS 302-2-201:2008(Moisture Resistance )	-	0	-
Cl.16 of IS 302-2-201:2008(Leakage Current & Electric Strength)	-	1000	-
Cl.16 of IS 302-2-201:2008(Leakage Current & Electric Strength)	-	0	-
Cl.17 of IS 302‐2-201: 2008(Overload Protection of Transformers & Associated Circuits)	-	500	-
Cl.19 of IS 302‐2-201: 2008(Abnormal Operation )	-	1000	-
Cl.19 of IS 302‐2-201: 2008(Abnormal Operation )	-	0	-
Cl.19 of IS 302‐2-201: 2008(Abnormal Operation )	-	0	-
Cl.19 of IS 302‐2-201: 2008(Abnormal Operation )	-	0	-
Cl.20 of IS 302-2-201: 2008(Stability & Mechanical Hazards)	-	200	-
Cl.21 of IS 302-2-201: 2008(Mechanical Strength )	-	200	-
Cl.21 of IS 302-2-201: 2008(Mechanical Strength )	-	0	-
Cl.21 of IS 302-2-201: 2008(Mechanical Strength )	-	0	-
Cl.22 of IS 302-2-201: 2008(Construction)	-	200	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	200	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	0	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	0	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	0	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	0	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	0	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	0	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	0	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	0	-
Cl.24 of IS 302-2-201: 2008(Component)	-	200	-
Cl.24 of IS 302-2-201: 2008(Component)	-	0	-
Cl.24 of IS 302-2-201: 2008(Component)	-	0	-
Cl.24 of IS 302-2-201: 2008(Component)	-	0	-
Cl.24 of IS 302-2-201: 2008(Component)	-	0	-
Cl.24 of IS 302-2-201: 2008(Component)	-	0	-
Cl.24 of IS 302-2-201: 2008(Component)	-	0	-
Cl.24 of IS 302-2-201: 2008(Component)	-	0	-
Cl.24 of IS 302-2-201: 2008(Component)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	500	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.26 of IS 302-2-201: 2008(Terminals for External Conductors)	-	200	-
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	1500	-
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	0	-
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	0	-
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	0	-
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	0	-
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	0	-
Cl.28 of IS 302-2-201: 2008(Screws & Connections )	-	200	-
Cl.29 of IS 302-2‐201:2008(Clearances, Creepage Distances and Solid Insulation )	-	500	-
Cl.30 of IS 302-2‐201:2008(Resistance to Heat and Fire )	-	500	-
Cl.31 of IS 302-2-201:2008(Resistance of Rusting )	-	500	-
4(GENERAL REQUIREMENTS)	-	100	-
5(GENERAL CONDITIONS FOR THE TESTS)	-	100	-
Cl.6 of IS 302-‐2-‐201:2008(Classification)	-	200	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	200	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.8 of IS 302‐2-201: 2008(Protection Against Access to Live Parts)	-	500	-
Cl.10 of IS 302‐2‐201:2008(Power Input and Current )	-	1500	-
Cl.11 of IS 302-2201: 2008(Heating)	-	1000	-
Cl.11 of IS 302-2201: 2008(Heating)	-	0	-
Cl.11 of IS 302-2201: 2008(Heating)	-	0	-
Cl.11 of IS 302-2201: 2008(Heating)	-	0	-
Cl.11 of IS 302-2201: 2008(Heating)	-	0	-
Cl.11 of IS 302-2201: 2008(Heating)	-	0	-
Cl.11 of IS 302-2201: 2008(Heating)	-	0	-
Cl.11 of IS 302-2201: 2008(Heating)	-	0	-
Cl.11 of IS 302-2201: 2008(Heating)	-	0	-
Cl.11 of IS 302-2201: 2008(Heating)	-	0	-
Cl.11 of IS 302-2201: 2008(Heating)	-	0	-
Cl.13 of IS 302-2-201: 2008(Leakage Current & Electric Strength at Operating Temperature)	-	1000	-
Cl.14 of IS 302‐2-201:2008(Transient Over Voltages )	-	500	-
Cl.15 of IS 302-2-201:2008(Moisture Resistance )	-	1000	-
Cl.15 of IS 302-2-201:2008(Moisture Resistance )	-	0	-
Cl.16 of IS 302-2-201:2008(Leakage Current & Electric Strength)	-	1000	-
Cl.16 of IS 302-2-201:2008(Leakage Current & Electric Strength)	-	0	-
Cl.17 of IS 302‐2-201: 2008(Overload Protection of Transformers & Associated Circuits)	-	500	-
Cl.19 of IS 302‐2-201: 2008(Abnormal Operation )	-	1000	-
Cl.19 of IS 302‐2-201: 2008(Abnormal Operation )	-	0	-
Cl.19 of IS 302‐2-201: 2008(Abnormal Operation )	-	0	-
Cl.19 of IS 302‐2-201: 2008(Abnormal Operation )	-	0	-
Cl.20 of IS 302-2-201: 2008(Stability & Mechanical Hazards)	-	200	-
Cl.21 of IS 302-2-201: 2008(Mechanical Strength )	-	200	-
Cl.21 of IS 302-2-201: 2008(Mechanical Strength )	-	0	-
Cl.21 of IS 302-2-201: 2008(Mechanical Strength )	-	0	-
Cl.22 of IS 302-2-201: 2008(Construction)	-	200	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	200	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	0	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	0	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	0	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	0	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	0	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	0	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	0	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	0	-
Cl.24 of IS 302-2-201: 2008(Component)	-	200	-
Cl.24 of IS 302-2-201: 2008(Component)	-	0	-
Cl.24 of IS 302-2-201: 2008(Component)	-	0	-
Cl.24 of IS 302-2-201: 2008(Component)	-	0	-
Cl.24 of IS 302-2-201: 2008(Component)	-	0	-
Cl.24 of IS 302-2-201: 2008(Component)	-	0	-
Cl.24 of IS 302-2-201: 2008(Component)	-	0	-
Cl.24 of IS 302-2-201: 2008(Component)	-	0	-
Cl.24 of IS 302-2-201: 2008(Component)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.26 of IS 302-2-201: 2008(Terminals for External Conductors)	-	200	-
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	1000	-
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	0	-
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	0	-
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	0	-
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	0	-
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	0	-
Cl.28 of IS 302-2-201: 2008(Screws & Connections )	-	200	-
Cl.29 of IS 302-2‐201:2008(Clearances, Creepage Distances and Solid Insulation )	-	500	-
Cl.30 of IS 302-2‐201:2008(Resistance to Heat and Fire )	-	500	-
Cl.31 of IS 302-2-201:2008(Resistance of Rusting )	-	500	-
4(GENERAL REQUIREMENTS)	-	100	-
5(GENERAL CONDITIONS FOR THE TESTS)	-	100	-

03 Oct, 2027

-
Included.w.e.f.07.11.2024 Exclusion 32 (RADIATION, TOXICITY AND SIMILAR HAZARDS) 19.11.4.1 to 19.11.4.5 (EMI/EMC)

IS 302 : Part 2 : Sec 13 (1994)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 13 frying pans, deep fat fryers and similar appliances

-----

24000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
31(Resistance to Rusting)	-	1000	-
30(Resistance to Heat, Fire and Tracking)	-	1000	-
29(Clearances, Creepage Distances & Solid Insulation)	-	500	-
28(Screws & Connections)	-	500	-
27(Provision For Earthing)	-	1500	-
26(Terminals For External Conductors)	-	500	-
25(Supply Connection & External Flexible Cables and Cords)	-	500	-
24(Components)	-	500	-
23(Internal wiring)	-	500	-
22(Construction)	-	500	-
21(Mechanical strength)	-	500	-
20(Stability & Mechanical Hazards)	-	500	-
19(Abnormal Operation)	-	2000	-
18(Endurance)	-	100	-
17(Overload Protection/ Overload Protection of Transformers & Associated Circuits)	-	500	-
16(Leakage Current and Electric Strength)	-	1500	-
15(Moisture Resistance)	-	3000	-
14(Transient Over Voltage)	-	1000	-
13(Leakage Current and Electric Strength at Operating Temperature)	-	1500	-
11(Temperature Rise/Heating)	-	2000	-
10(Power Input)	-	2000	-
9(Starting Of Motor Operated Appliances)	-	200	-
8(Protection against Electric Shock/ Protection against Access to Live Parts)	-	1000	-
7(Marking/ Marking & Instructions)	-	500	-
6(Classification)	-	500	-
5(Rating)	-	200	-
31(Resistance to Rusting)	-	1000	-
30(Resistance to Heat, Fire and Tracking)	-	1000	-
29(Clearances, Creepage Distances & Solid Insulation)	-	500	-
28(Screws & Connections)	-	500	-
27(Provision For Earthing)	-	1500	-
26(Terminals For External Conductors)	-	500	-
25(Supply Connection & External Flexible Cables and Cords)	-	500	-
24(Components)	-	500	-
23(Internal wiring)	-	500	-
22(Construction)	-	500	-
21(Mechanical strength)	-	500	-
20(Stability & Mechanical Hazards)	-	500	-
19(Abnormal Operation)	-	2000	-
18(Endurance)	-	100	-
17(Overload Protection/ Overload Protection of Transformers & Associated Circuits)	-	500	-
16(Leakage Current and Electric Strength)	-	1500	-
15(Moisture Resistance)	-	3000	-
14(Transient Over Voltage)	-	1000	-
13(Leakage Current and Electric Strength at Operating Temperature)	-	1500	-
11(Temperature Rise/Heating)	-	2000	-
10(Power Input)	-	2000	-
9(Starting Of Motor Operated Appliances)	-	200	-
8(Protection against Electric Shock/ Protection against Access to Live Parts)	-	1000	-
7(Marking/ Marking & Instructions)	-	500	-
6(Classification)	-	500	-
5(Rating)	-	200	-

03 Oct, 2027

-
Included w.e.f.18.11.2024 Exclusion 32 (Radiation ,Toxicity and similar hazards) 19.11.4.1 to 19.11.4.7 (EMI/EMC)

IS 2082 (2018)

Stationary storage type electric water heaters - Specification (Fifth Revision)

22000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking)	-	1250	--
7(Marking)	-	1250	--
7(Marking)	-	1250	--
7(Marking)	-	1250	--
7(Marking)	-	1250	--
7(Marking)	-	1250	--
7(Marking)	-	1250	--
7(Marking)	-	1250	--
7(Marking)	-	1250	--
7(Marking)	-	1250	--
7(Marking)	-	1250	--
7(Marking)	-	1250	--
7(Marking)	-	1250	--
7(Marking)	-	1250	--
7(Marking)	-	1250	--
7(Marking)	-	1250	--
7(Marking)	-	1250	--
7(Marking)	-	1250	--
7(Marking)	-	1250	--
7(Marking)	-	1250	--
7(Marking)	-	1250	--
7(Marking)	-	1250	--
7(Marking)	-	1250	--
7(Marking)	-	1250	--
7(Marking)	-	1250	--
7(Marking)	-	1250	--
7(Marking)	-	1250	--
7(Marking)	-	1250	--
6(Classification )	-	1250	--
6(Classification )	-	1250	--
(Cl.8 of IS 302-2-21:2011)(Protection Against Access to Live Parts)	-	500	--
(Cl.10 of IS 302-2-21: 2011)(Power Input & Current)	-	1000	--
(Cl.11 of 302-2-21:2011)(Heating)	-	1000	--
(Cl.11 of 302-2-21:2011)(Heating)	-	1000	--
(Cl.11 of 302-2-21:2011)(Heating)	-	1000	--
(Cl.13 of IS 302-2-21:2011)(Leakage Current )	-	500	--
(Cl.13 of IS 302-2-21:2011)(Electrical Strength at Operating Temperature)	-	500	--
(Cl.15 of IS 302-2-21-2011)(Moisture Resistance)	-	1000	--
(Cl.15 of IS 302-2-21-2011)(Moisture Resistance)	-	1000	--
(Cl.15 of IS 302-2-21-2011)(Moisture Resistance)	-	1000	--
(Cl.17 of IS 302-2-21:2011)(Overload protection of transformers & associated circuits)	-	2000	--
(Cl.19 of IS 302-2-21:2011)(Abnormal Operation)	-	1000	--
(Cl.19 of IS 302-2-21:2011)(Abnormal Operation)	-	1000	--
(Cl.19 of IS 302-2-21:2011)(Abnormal Operation)	-	1000	--
(Cl.19 of IS 302-2-21:2011)(Abnormal Operation)	-	1000	--
(Cl.20 of IS 302-2-21:2011)(Stability & Mechanical Hazards)	-	500	--
(Cl.21ofIS302-2-21:2011)(Mechanical strength)	-	750	--
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	--
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	--
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	--
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	--
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	--
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	--
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	--
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	--
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	--
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	--
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	--
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	--
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	--
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	--
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	--
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	--
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	--
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	--
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	--
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	--
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	--
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	--
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	--
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	--
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	--
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	--
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	--
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	--
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	--
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	--
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	--
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	--
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	--
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	--
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	--
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	--
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	--
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	--
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	--
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	--
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	--
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	--
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	--
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	--
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	--
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	--
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	--
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	--
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	--
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	--
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	--
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	--
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	--
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	--
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	--
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	--
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	--
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	--
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	--
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	--
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	--
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	--
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	--
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	--
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	--
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	500	--
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	500	--
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	500	--
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	500	--
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	500	--
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	500	--
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	500	--
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	500	--
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	500	--
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	500	--
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	500	--
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	500	--
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	500	--
(Cl.24ofIS302-221:2011)(Component)	-	750	--
(Cl.24ofIS302-221:2011)(Component)	-	750	--
(Cl.24ofIS302-221:2011)(Component)	-	750	--
(Cl.24ofIS302-221:2011)(Component)	-	750	--
(Cl.24ofIS302-221:2011)(Component)	-	750	--
(Cl.24ofIS302-221:2011)(Component)	-	750	--
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	750	--
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	750	--
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	750	--
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	750	--
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	750	--
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	750	--
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	750	--
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	750	--
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	750	--
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	750	--
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	750	--
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	750	--
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	750	--
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	750	--
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	750	--
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	750	--
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	750	--
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	750	--
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	750	--
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	750	--
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	750	--
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	750	--
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	750	--
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	750	--
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	750	--
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	750	--
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	750	--
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	750	--
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	750	--
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	750	--
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	750	--
(Cl.27 of IS 302-2-21:2011)(Provision for Earthing)	-	500	--
(Cl.27 of IS 302-2-21:2011)(Provision for Earthing)	-	500	--
(Cl.27 of IS 302-2-21:2011)(Provision for Earthing)	-	500	--
(Cl.27 of IS 302-2-21:2011)(Provision for Earthing)	-	500	--
(Cl.27 of IS 302-2-21:2011)(Provision for Earthing)	-	500	--
(Cl.27 of IS 302-2-21:2011)(Provision for Earthing)	-	500	--
(Cl.28 of IS 302-2-21:2011)(Screws & Connections)	-	500	--
(Cl.29ofIS302-2-21:2011)(Clearances, Creepage Distances and Solid Insulation)	-	500	--
(Cl.30 of IS 302-2-21:2011)(Resistance to Heat & Fire)	-	1500	--
(Cl.30 of IS 302-2-21:2011)(Resistance to Heat & Fire)	-	1500	--
(Cl.31 of IS 302-2-21:2011)(Resistance to Rusting)	-	750	--
(Cl.15 of IS 2082:2018)(Verification of the Rated Capacity)	-	2250	--
(Cl.16 of IS 2082:2018)(Standing Loss per 24 Hours)	-	6000	--
(Cl.17 of IS 2082:2018)(Hot Water Output)	-	3000	--
(Cl.18 of IS 2082:2018)( Reheating Time)	-	2500	--
(Cl.19 of IS 2082:2018)(Mixing Factor)	-	1250	--
(Cl.20 of IS 2082:2018)(Deviation of Dial Calibration)	-	1500	--
(Cl.21 of IS 2082:2018)(Cyclic Temperature Variation)	-	1000	--
(Cl.22 of IS 2082:2018)(Finish)	-	1000	--
Cl.22 of IS 2082:2018(Finish)	-	1000	--
Cl.21 of IS 2082:2018(Cyclic Temperature Variation)	-	1000	--
Cl.20 of IS 2082:2018(Deviation of Dial Calibration)	-	1500	--
Cl.19 of IS 2082:2018(Mixing Factor)	-	1250	--
Cl.18 of IS 2082:2018( Reheating Time)	-	2500	--
Cl.17 of IS 2082:2018(Hot Water Output)	-	3000	--
Cl.16 of IS 2082:2018(Standing Loss per 24 Hours)	-	6000	--
Cl.15 of IS 2082:2018(Verification of the Rated Capacity)	-	2250	--
Cl.31 of IS 302-2-21:2018(Resistance to Rusting)	-	375	--
Cl.30.2 of IS 302-1:2008(Resistance to Heat & Fire : Glow wire test )	-	750	--
Cl.30.1 of IS 302-1:2008(Resistance to Heat & Fire : Ball pressure test )	-	750	--
Cl.29.2 of IS 302-1:2008(Clearances, Creepage Distances and Solid Insulation : Creepage distance )	-	250	--
Cl.29.1 of IS 302-1:2008(Clearances, Creepage Distances and Solid Insulation : Clearance distance )	-	250	--
Cl.28 of IS 302-2-21:2018(Screws & Connections)	-	500	--
Cl.27.5 of IS 302-1:2008(Provision for Earthing : ECR )	-	250	--
Cl.27 of IS 302-2-21:2018(Provision for Earthing)	-	250	--
Cl.26 of IS 302-2-21: 2018(Terminals for External Conductors)	-	750	--
Cl.25.18 of IS 302-1:2008(Supply Connection & External Flexible Cords)	-	90	--
Cl.25.15 of IS 302-1:2008(Supply Connection & External Flexible Cords : Cord grip test - displacement )	-	90	--
Cl.25.15 of IS 302-1:2008(Supply Connection & External Flexible Cords : Cord grip test )	-	90	--
Cl.25.12 of IS 302-1:2008(Supply Connection & External Flexible Cords : Moulding of supply cord )	-	90	--
Cl.25.10 of IS 302-1:2008(Supply Connection & External Flexible Cords : Colour of Earthing conductor )	-	90	--
Cl.25.8 of IS 302-2-21:2018(Supply Connection & External Flexible Cords : Resistance of supply cord )	-	90	--
Cl.25.5 of IS 302-1:2008(Supply Connection & External Flexible Cords : Type of attachment )	-	90	--
Cl.25 of IS 302-2-21:2018(Supply Connection & External Flexible Cords : connection to the supply mains)	-	90	--
Cl.24.102 of IS 302-221:2018(Component : Operation of thermal cut-out )	-	250	--
Cl.24.101 of IS302-221:2018(Component : Location of non self reseting thermal cut out )	-	250	--
Cl.24of IS 302-221:2018(Component : Relevent Indian standards )	-	250	--
Cl. 23 of IS 302-1:2008(Internal Wiring : color identification for earthing conductor )	-	250	--
Cl. 23 of IS 302-1:2008(Internal Wiring )	-	250	--
Cl.22.111 of IS 302-2-21:2018(Construction : Resistance to vacuum )	-	55	--
Cl.22.110 of IS 302-2-21:2018(Construction : meterial of connections )	-	55	--
Cl.22.110 of IS 302-2-21:2018(Construction : Material of Inner conatiner )	-	55	--
Cl.22.109 of IS 302-2-21:2018(Construction : Drain for appliance having a capacity of more than 15 liter)	-	55	--
Cl.22.108 of IS 302-2-21:2018(Construction : fixing to wall )	-	55	--
Cl.22.107 of IS 302-2-21:2018(Construction : Position of Heating elements and thermal control sensor)	-	55	--
Cl.22.106 of IS 302-2-21:2018(Construction : Operation of thermal cut- out )	-	55	--
Cl.22.104 of IS 302-2-21:2018(Construction : Outlet of open outlet heater )	-	55	--
Cl.22.103 of IS 302-2-21:2018(Construction : Operation of Pressure relieve devices )	-	55	--
Cl.22.102 of IS 302-2-21:2018(Construction : repeated drawing of water temp )	-	55	--
Cl.22.101 of IS 302-2-21:2018(Construction : rated pressure of closed water heater )	-	55	--
Cl.22.47 of IS 302-2-21:2018 (Construction : Water pressure test )	-	55	--
Cl.22.44 of IS 302-1:2008(Construction : Shape and decoration of enclosure)	-	55	--
Cl.22.34, Cl 22.35 of IS 302-1:2008(Construction : Shaft of operating Knobs )	-	55	--
Cl.22.33 of IS 302-1:2008(Construction : Direct contact of liquids )	-	55	--
Cl 22.26 ,Cl.22.28, Cl 22.29, Cl 22.30 , Cl 22.31, Cl 22.32 of IS 302-1:2008(Construction : Supplymentry/ double / reinforced insulation for Class II/ Class III appliance )	-	55	--
Cl.22.18 Of IS 302-1:2008(Construction : Resistance to corrosion )	-	55	--
Cl.22.17 of IS 302-1:2008(Construction : Spacers )	-	55	--
Cl.22.14 of IS 302-1:2008(Construction : ragged or sharp edges)	-	55	--
Cl.22.12 of IS 302-1:2008(Construction : Fixing of Handle, knob, grips, levers and similar parts)	-	55	--
Cl.22.11 of IS 302-1:2008(Construction : Fixing of non detachable part )	-	55	--
Cl.22.7 of IS 302-1:2008(Construction: adequate safeguards against the risk of excessive pressure)	-	55	--
Cl.22.6 of IS 302-2-21:2018(Construction : Size of drain hole )	-	55	--
Cl.22.2 of IS 302-1:2008(Construction : Provision to ensure all pole disconnection )	-	55	--
Cl.22.1 of IS 302-1:2008(Construction : IP test )	-	55	--
Cl.21.2 of IS 302-1:2008(Mechanical strength : prevent penetration by sharp implements. )	-	375	--
Cl.21.1 of IS 302-1:2008(Mechanical strength : Rough handling in normal use)	-	375	--
Cl.20 of IS 302-1:2008(Stability & Mechanical Hazards)	-	500	--
Cl.19 of IS 302-2-21:2018(Abnormal Operation : leakage from container during test)	-	200	--
Cl.19 of IS 302-2-21:2018(Abnormal Operation : High Voltage )	-	200	--
Cl.19 of IS 302-2-21:2018(Abnormal Operation : Insulation of the supply cable or cord)	-	200	--
Cl.19 of IS 302-2-21:2018(Abnormal Operation : emission of flame or molten metal or poisonous or ignitable gas )	-	200	--
Cl.16 of IS 302-2-21-2018(Leakage current and Electric strength (After humidity): Electric Strentgh )	-	1500	--
Cl.16 of IS 302-2-21-2018(Leakage current and Electric strength (After humidity): Leakage current )	-	1500	--
Cl.15 of IS 302-2-21-2018(Moisture Resistance)	-	1000	--
Cl.13 of IS 302-2-21:2018(3 Strength at Operating Temperature)	-	500	--
Cl.13 of IS 302-2-21:2018(Leakage Current )	-	500	--
Cl.11 of 302-2-21:2018(Heating : Room Temp.)	-	300	--
Cl.11 of 302-2-21:2018(Heating : Temp of Rubber or PVC insulation of internal and external wiring)	-	300	--
Cl.11 of 302-2-21:2018(Heating : Temp of Walls, ceilings and floor of the test corner )	-	300	--
Cl.10 of IS 302-2-21: 2018(Power Input & Current)	-	1000	--
Cl.8 of IS 302-2-21:2018(Protection Against Access to Live Parts)	-	500	--
7.101(Marking : Indifiction of water inlet and water outlet )	-	50	--
7.14(Marking : Legibility and durability)	-	500	--
7.13(Marking : Official language of Instruction )	-	50	--
7.11(Marking : Indication of controls )	-	50	--
7.8(Marking : Terminals )	-	50	--
7.6(Marking : Symbol used )	-	50	--
7.1(Marking : Warning for Open- outlet )	-	50	--
7.1(Marking : Statement for pressure reducing valve ( For rated pressure less than 0.6 MPa))	-	50	--
7.1(Marking : Rated capacity)	-	50	--
7.1(Marking : Country of manufacture)	-	50	--
7.1(Marking: IP Number)	-	50	--
7.1(Marking: Symbol for Class II)	-	50	--
7.1(Marking: Model or type reference)	-	50	--
7.1(Marking : Rated power input)	-	50	--
7.1(Marking : Symbol for nature of supply )	-	50	--
4(GENERAL REQUIREMENT)	-	1250	--
5(GENERAL CONDITIONS FOR THE TESTS)	-	50	--
12(THERMOSTAT SETTING)	-	1250	--
Cl-10(Mounting of the water heater)	-	1250	--
Cl-12(Thermostat setting)	-	1250	--
Cl-13(Measurement of energy consumption)	-	2250	--
Cl-14(Verification of the rated capacity)	-	2250	--
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	750	--
Cl.19 of IS 302-2-21:2018(Abnormal Operation : Wall ceiling temp. of test corner )	-	200	--
7.1(Marking : Statement for a pressure-relief device)	-	50	--
7.1(Marking : Rated pressure)	-	50	--
7.1(Marking: Name, trademark or identification mark of manufacturer )	-	50	--
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	750	--
Cl.22.6 of IS 302-1:2008(Construction : Effect of water on 3 insulation )	-	750	--
7.1(Marking : Rated Voltage )	-	50	--
Cl-11(Measurements of stored water temperature)	-	750	--
(Cl.14ofIS302-2-21:2011)(Transient Over Voltages)	-	500	-
Cl.14 of IS 302-2-21:2018(Transient Over Voltages)	-	500	-

03 Oct, 2027

-
-

IS 302 : Part 2 : Sec 3 (2007)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 3 electric iron (First Revision)

16000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Classification- IS 302-1 )	-	100	--
6(Classification- IS 302-1)	-	100	--
7.1(Marking- IS 302-1)	-	60	--
7.1(Marking- IS 302-1)	-	40	--
7.1(Marking- IS 302-1)	-	40	--
7.1(Marking- IS 302-1)	-	40	--
7.1(Marking- IS 302-1)	-	40	-
7.1(Marking- IS 302-1)	-	40	--
7.1(Marking- IS 302-1)	-	40	--
7.1(Marking- IS 302-1)	-	40	--
7.1(Marking- IS 302-1)	-	40	--
7.3(Marking- IS 302-1)	-	40	--
7.4(Marking- IS 302-1)	-	40	--
7.6(Marking- IS 302-1)	-	40	--
7.7(Marking- IS 302-1)	-	40	--
7.8(Marking- IS 302-1)	-	40	--
7.11(Marking- IS 302-1)	-	40	--
7.12(Marking- IS 302-1)	-	40	--
7.13(Marking- IS 302-1)	-	40	--
7.14(Marking- IS 302-1)	-	40	--
7.15(Marking- IS 302-1)	-	40	--
7.101(Marking)	-	40	--
8( Protection Against Electric Shock, IS 302-1)	-	500	--
10(Power Input and Current, IS 302-1)	-	900	--
11(Heating, IS 302-1)	-	500	--
11(Heating, IS 302-1)	-	500	--
11(Heating, IS 302-1)	-	1000	--
11(Heating, IS 302-1)	-	1000	--
11(Heating, IS 302-1)	-	1000	--
11(Heating, IS 302-1)	-	1000	--
11(Heating, IS 302-1)	-	1000	--
11(Heating, IS 302-1)	-	1000	--
13(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	1000	--
13(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	750	--
15.1(Moisture Resistance, IS 302-1)	-	500	--
15.2(Moisture Resistance, IS 302-1)	-	500	--
15.3(Moisture Resistance, IS 302-1)	-	500	--
16(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	1000	--
16(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	1000	--
19.4(Abnormal Operation, IS 302-1)	-	100	--
19.4(Abnormal Operation, IS 302-1)	-	100	--
19.5(Abnormal Operation, IS 302-1)	-	80	--
19.5(Abnormal Operation, IS 302-1)	-	100	--
19.7(Abnormal Operation)	-	80	--
19.9(Abnormal Operation)	-	80	--
19.1(Abnormal Operation)	-	80	--
19.101(Abnormal Operation)	-	80	--
20.1(Stability & Mechanical Hazards, IS 302-1)	-	250	--
20.2(Stability & Mechanical Hazards, IS 302-1)	-	250	--
21.1(Mechanical Strength, IS 302-1)	-	200	--
21.2(Mechanical Strength, IS 302-1)	-	200	--
21.101(Mechanical Strength, IS 302-2-3)	-	100	--
22(Construction, IS 302-1)	-	80	--
22.101(Construction)	-	60	--
22.102(Construction)	-	60	--
22.103(Construction)	-	60	--
22.104(Construction)	-	60	--
22.105(Construction)	-	60	--
22.106(Construction)	-	60	--
22.107(Construction)	-	60	--
23.1(Internal Wiring, IS 302-1)	-	50	--
23.2(Internal Wiring, IS 302-1)	-	50	--
23.3(Internal Wiring, IS 302-1)	-	50	--
23.4(Internal Wiring, IS 302-1)	-	50	--
23.5(Internal Wiring, IS 302-1)	-	50	--
23.6(Internal Wiring, IS 302-1)	-	50	--
23.7(Internal Wiring, IS 302-1)	-	50	--
23.8(Internal Wiring, IS 302-1)	-	50	--
23.9(Internal Wiring, IS 302-1)	-	50	--
23.10(Internal Wiring, IS 302-1)	-	50	--
24.1(Components, IS 302-1)	-	100	--
24.2(Components, IS 302-1)	-	100	--
24.4(Components, IS 302-1)	-	100	--
24.5(Components, IS 302-1)	-	100	--
24.6(Components, IS 302-1)	-	100	--
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	50	--
25.5(Supply Connection and External Flexible Cords, IS 302-1)	-	50	--
25.6(Supply Connection and External Flexible Cords, IS 302-1)	-	25	--
25.7(Supply Connection and External Flexible Cords, IS 302-1)	-	25	--
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	25	--
26.9(Supply Connection and External Flexible Cords, IS 302-1)	-	25	--
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	25	--
25.11(Supply Connection and External Flexible Cords, IS 302-1)	-	25	--
25.12(Supply Connection and External Flexible Cords, IS 302-1)	-	25	--
25.13(Supply Connection and External Flexible Cords, IS 302-1)	-	25	--
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	25	--
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	50	--
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	25	--
25.16(Supply Connection and External Flexible Cords, IS 302-1)	-	25	--
25.17(Supply Connection and External Flexible Cords, IS 302-1)	-	25	--
25.18(Supply Connection and External Flexible Cords, IS 302-1)	-	25	--
25.19(Supply Connection and External Flexible Cords, IS 302-1)	-	25	--
25.2(Supply Connection and External Flexible Cords, IS 302-1)	-	25	--
25.21(Supply Connection and External Flexible Cords, IS 302-1)	-	25	--
25.22(Supply Connection and External Flexible Cords, IS 302-1)	-	25	--
26(Terminals for External Conductors, IS 302-1)	-	500	--
27.1(Provision for Earthing, IS 302-1)	-	100	--
27.2(Provision for Earthing, IS 302-1)	-	100	--
27.3(Provision for Earthing, IS 302-1)	-	100	--
27.4(Provision for Earthing, IS 302-1)	-	100	--
27.5(Provision for Earthing, IS 302-1)	-	500	--
28(Screws & Connections, IS 302-1)	-	500	--
29.1(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	250	--
29.2(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	250	--
30.1(Resistance to Heat, Fire & Tracking, IS 302-1)	-	500	--
30.2(Resistance to Heat, Fire & Tracking, IS 302-1)	-	500	--
31(Resistance of Rusting, IS 302-1)	-	500	--
4(General requirement)	-	50	--
16(Leakage current and electric strength)	-	1000	--
17(Overload protection of transformers and associated circuits)	-	0	This clause of Part 1 is applicable.
17(Overload protection of transformers and associated circuits)	-	0	This clause of Part 1 is applicable.
17(Overload protection of transformers and associated circuits)	-	0	This clause of Part 1 is applicable.
18(Endurance)	-	0	This clause of Part 1 is not applicable.
5(GENERAL CONDITIONS FOR THE TESTS)	-	50	--
19(Abnormal operation)	-	500	--
25(Supply Connection and External Flexible Cords)	-	50	--
14(Transient Over Voltages, IS 302-1)	-	1000	-

03 Oct, 2027

-
Exclusion 32 (Radiation, Toxicity and similar Hazard IS 302-1) 19.11.4.1 to 19.11.4.7

IS 4250 (1980)

Specification for domestic electric food - Mixers (Liquidizers And Grinders) (First Revision)

26000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Classification- IS 302-1 )	-	50	--
6(Classification- IS 302-1)	-	50	--
7.1(Marking- IS 302-1)	-	200	--
7.1(Marking- IS 302-1)	-	200	--
7.1(Marking- IS 302-1)	-	500	--
7.1(Marking- IS 302-1)	-	500	--
7.1(Marking- IS 302-1)	-	500	--
7.1(Marking- IS 302-1)	-	500	--
7.1(Marking- IS 302-1)	-	500	--
7.1(Marking- IS 302-1)	-	500	--
7.1(Marking- IS 302-1)	-	500	--
7.1(Marking- IS 302-1)	-	500	--
7.1(Marking- IS 302-1)	-	500	--
7.1(Marking- IS 302-1)	-	500	--
7.1(Marking- IS 302-1)	-	500	--
7.2(Marking)	-	500	--
7.1(Marking- IS 302-1)	-	500	--
7.1(Marking- IS 302-1)	-	500	--
7.1(Marking- IS 302-1)	-	500	--
7.4(Marking)	-	500	--
7.5(Marking)	-	500	--
7.6(Marking)	-	500	--
8( Protection Against Electric Shock, IS 302-1)	-	500	--
9(Starting, IS 302-1)	-	500	--
10(Power Input and Current, IS 302-1)	-	2000	--
11(Heating, IS 302-1)	-	2000	--
11(Heating, IS 302-1)	-	2000	--
11(Heating, IS 302-1)	-	2000	--
11(Heating, IS 302-1)	-	2000	--
11(Heating, IS 302-1)	-	2000	--
13(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	1250	--
13(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	1250	--
15.1(Moisture Resistance, IS 302-1)	-	1000	--
15.2(Moisture Resistance-Spillage test)	-	1000	--
15(Moisture Resistance, IS 302-1)	-	1000	--
16(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	1250	--
16(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	1250	--
19(Abnormal Operation, IS 302-1)	-	1000	--
19(Abnormal Operation, IS 302-1)	-	1000	--
19(Abnormal Operation, IS 302-1)	-	1000	--
19(Abnormal Operation, IS 302-1)	-	1000	--
20(Stability & Mechanical Hazards, IS 302-1)	-	500	--
20(Stability & Mechanical Hazards, IS 302-1)	-	500	--
21(Mechanical Strength, IS 302-1)	-	750	--
21(Mechanical Strength, IS 302-1)	-	750	--
22.1(Construction, IS 302-1)	-	1500	--
22.2(Construction)	-	1500	--
22.3(Construction)	-	1500	--
22.4(Construction)	-	1500	--
22.5(Construction)	-	1500	--
22.6(Construction)	-	1500	--
22.8(Construction)	-	1500	--
22.9(Construction)	-	1500	--
22.1(Construction)	-	1500	--
23(Internal Wiring, IS 302-1)	-	500	--
23(Internal Wiring, IS 302-1)	-	500	--
23(Internal Wiring, IS 302-1)	-	500	--
23(Internal Wiring, IS 302-1)	-	500	--
23(Internal Wiring, IS 302-1)	-	500	--
23(Internal Wiring, IS 302-1)	-	500	--
23(Internal Wiring, IS 302-1)	-	500	--
23(Internal Wiring, IS 302-1)	-	500	--
23(Internal Wiring, IS 302-1)	-	500	--
23(Internal Wiring, IS 302-1)	-	500	--
24.1(Components, IS 302-1)	-	750	--
24.1(Components, IS 302-1)	-	750	--
24.1(Components, IS 302-1)	-	750	--
24.1(Components, IS 302-1)	-	750	--
24.2(Components)	-	750	--
24.4(Components)	-	750	--
24.5(Components)	-	750	--
24.6(Components)	-	750	--
24.7(Components)	-	750	--
24.8(Components)	-	750	--
24.9(Components)	-	750	--
25(Supply Connection and External Flexible Cords, IS 302-1)	-	750	--
25(Supply Connection and External Flexible Cords, IS 302-1)	-	750	--
25(Supply Connection and External Flexible Cords, IS 302-1)	-	750	--
25(Supply Connection and External Flexible Cords, IS 302-1)	-	750	--
25(Supply Connection and External Flexible Cords, IS 302-1)	-	750	--
25(Supply Connection and External Flexible Cords, IS 302-1)	-	750	--
25(Supply Connection and External Flexible Cords, IS 302-1)	-	750	--
25(Supply Connection and External Flexible Cords, IS 302-1)	-	750	--
25(Supply Connection and External Flexible Cords, IS 302-1)	-	750	--
25(Supply Connection and External Flexible Cords, IS 302-1)	-	750	--
25(Supply Connection and External Flexible Cords, IS 302-1)	-	750	--
25(Supply Connection and External Flexible Cords, IS 302-1)	-	750	--
25(Supply Connection and External Flexible Cords, IS 302-1)	-	750	--
25(Supply Connection and External Flexible Cords, IS 302-1)	-	750	--
25(Supply Connection and External Flexible Cords, IS 302-1)	-	750	--
25(Supply Connection and External Flexible Cords, IS 302-1)	-	750	--
25(Supply Connection and External Flexible Cords, IS 302-1)	-	750	--
26(Terminals for External Conductors, IS 302-1)	-	750	--
27(Provision for Earthing, IS 302-1)	-	500	--
27(Provision for Earthing, IS 302-1)	-	500	--
27(Provision for Earthing, IS 302-1)	-	500	--
27(Provision for Earthing, IS 302-1)	-	500	--
27(Provision for Earthing, IS 302-1)	-	500	--
28(Screws & Connections, IS 302-1)	-	500	--
29(Clearances and Distances through Insulation, IS 302-1)	-	500	--
29(Clearances and Distances through Insulation, IS 302-1)	-	500	--
30(Resistance to Heat, Fire, Tracking, IS 302-1)	-	1500	--
30(Resistance to Heat, Fire, Tracking, IS 302-1)	-	1500	--
31(Resistance of Rusting, IS 302-1)	-	1500	--
34.2(Operational tests- Grinding coffee (for machines which have a dry grinding arrangement))	-	500	--
34.2(Operational tests- Grinding coffee (for machines which have a dry grinding arrangement))	-	500	--
34.2(Operational tests- Grinding coffee (for machines which have a dry grinding arrangement))	-	500	--
34.3(Whisking egg whites )	-	500	--
34.4(IDLI batter-Grinding of black gram)	-	1000	--
34.4(IDLI batter-Grinding of rice)	-	1000	--
34.4(IDLI batter-Grinding of rice)	-	1000	--
34.4(IDLI batter-Grinding of rice)	-	1000	--
34.5.1 (a)(Operational test for juicers )	-	1000	--
34.5.1 (b)(Operational test for juicers )	-	1000	--
34.5.2(Operational test for juicers )	-	1000	--
35(Temperature withstand test for bowl)	-	200	--
36(Test for controls )	-	500	--
37(Strength of Assembly )	-	500	--
37(Strength of Assembly )	-	500	--
Cl 37(Strength of assembly)	-	500	--
Cl 36(Test for controls)	-	1500	--
Cl 35(Temperature withstand test for bowl)	-	600	--
Cl.31(Resistance to rusting)	-	250	--
Cl.30(Resistance to heat and fire)	-	250	--
CL.29(Clearances, Creepage distances and Solid Insulation)	-	200	--
Cl.28(Screws and connections)	-	200	--
Cl.27(Provision for Earthing)	-	500	--
Cl.26(Terminals for external conductors)	-	200	--
Cl.25(Supply connection and external flexible cords)	-	100	--
Cl.24(Components)	-	100	--
Cl.23(Internal wiring)	-	100	--
Cl.22(Construction)	-	200	--
Cl.21(Mechanical Strength)	-	250	--
Cl.20(Stability & Mechanical Hazards)	-	250	--
Cl.19(Abnormal operation)	-	500	--
Cl.18(Endurance)	-	2500	--
Cl. 16(Leakage current and Electric strength)	-	750	--
Cl.15(Moisture Resistance)	-	500	--
Cl.13(Leakage current and Electric strength at operating temperature)	-	1000	--
Cl.11(Temperature rise/ Heating)	-	1500	--
Cl.10(Power Input and Current)	-	1000	--
Cl.8(Protection against access to live parts/ Protection against electric shock)	-	500	--
Cl. 7(Marking and instructions)	-	100	--
Cl. 6(Classification)	-	200	--
3(GENERAL REQUIREMENTS)	-	50	--
4(GENERAL NOTES ON TESTS)	-	50	--
5(RATING)	-	100	--
Cl 34(Operational Tests)	-	1500	--
14(Transient Over Voltages, IS 302-1)	-	500	-
Cl.14(Transient Over voltage)	-	500	-

03 Oct, 2027

-
-

IS 302 : Part 1 (2008)

Safety of household and similar electrical appliances: Part 1 general requirements (Sixth Revision)

45000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking and instructions)	-	100	--
8.1.1(Protection against live parts in all positions)	-	500	--
8.1.2(Protection against live parts in openings)	-	500	--
8.1.3(Protection against live parts in visible glowing heating elements)	-	500	--
8.1.4(Protection against live parts against protective impedance)	-	500	--
9(Starting of motor operation test requirements and tests)	-	500	--
10.1(Power input)	-	1000	--
10.2(Current input)	-	1000	--
11.1(General)	-	100	--
11.2(General)	-	800	--
11.3(Heating)	-	1000	--
13.1(General)	-	500	--
13.2(Leakage current at operating temperature)	-	1000	---
13.3(Electric Strength at operating temperature)	-	500	--
15.0(General)	-	500	--
15.1(Ingress Protection test other than IPX0 (IP test))	-	500	--
15.2(Spillage Test)	-	500	--
15.3(Humidity Test)	-	1000	--
16.0(General)	-	500	--
16.1(General)	-	500	---
16.2(Leakage Current (after Clause 15))	-	1000	---
16.3(Electric Strength (after clause 15 and 16.2))	-	500	--
17(Over Load Protection of Transformers and associated circuits)	-	1000	---
18(Endurance Test requirements and tests)	-	2000	--
19(Abnormal Operation)	-	2000	--
20(Stability test)	-	2000	--
21(Mechanical Strength Test)	-	2000	--
22(Construction verification related test)	-	2000	--
23(General)	-	2000	---
24(Components)	-	2000	--
25(Supply connection and external flexible cords)	-	2000	--
26(Terminals for external conductors)	-	2000	--
27(Provision for earthing)	-	2000	--
28(Screw test and connections)	-	1000	--
29(clearance, creepage distances and solid insulation)	-	1000	--
30.1(Ball pressure test)	-	500	---
30.2(Glow Wire Test)	-	1000	--
30.2(Needle Flame Test)	-	500	--
31(Resistance to Rusting)	-	1000	--
4(General requirement)	-	50	--
16(Leakage current and electric strength)	-	500	--
17(Overload protection of transformers and associated circuits)	-	1000	--
18(Endurance)	-	2000	--
8.1.5(Live parts of built-in appliances)	-	500	--
11.4(Heating appliances)	-	1000	--
11.5(Motor-operated appliances)	-	1000	--
11.6(Combined appliances)	-	1000	--
11.7(Duration corresponding)	-	1000	--
11.8(Temperature rise)	-	1000	--
4(General Requirement)	-	50	-
5(General conditions for tests)	-	50	--
6(Classification- IS 302-1)	-	250	--
14(Transient Over Voltages)	-	1000	-

03 Oct, 2027

-
19.11.4.1 to 19.11.4.7 32 (Radiation Toxicity and Similar Hazards)

IS 302 : Part 2 : Sec 21 (2018)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 21 stationary storage type electric water heaters (Second Revision)

13600 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
31.0(Resistance To Rusting)	-	500	--
30.0(Resistance To Heat and Fire)	-	1000	--
29.0(Creepage Distances and Clearances)	-	500	--
28.0(Screws and Connections)	-	500	--
27.0(Provision For Earthing)	-	500	--
26.0(Terminals for external conductors)	-	500	--
25.0(Supply Connection and External Flexible Cords)	-	500	--
23.0(Internal Wiring)	-	300	--
22.0(Construction)	-	200	--
21.0(Mechanical Strength)	-	200	--
20.0(Stability and mechanical hazards)	-	300	--
19.0(Abnormal Operation)	-	500	--
17.0(Overload Protection of transformer and associated circuit)	-	500	--
16.0(Leakage current and Electric strength (After Humidity (Environmental) Treatment))	-	500	--
15.0(Moisture resistance)	-	1500	--
13.0(Leakage Current and electric strength at operating temperature)	-	1500	--
11.0(Heating)	-	1000	--
10.0(Input and Current)	-	1000	--
8.0(Protection against access to live parts)	-	500	--
6.0(Classification)	-	100	--
7.0(Marking and Instructions)	-	500	--
24(Components)	-	500	--
4(GENERAL REQUIREMENTS)	-	0	Visual inspection
5(GENERAL CONDITIONS FOR THE TESTS)	-	0	Visual Inspection
14.0(Transient Overvoltage)	-	1000	-

03 Oct, 2027

-
Cl 19.11.4.1 to Cl 19.11.4.7 32 (RADIATION TOXICITY AND SIMILAR HAZARDS)

IS 302 : Part 2 : Sec 9 (2009)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 9 toasters, grills, roasters and similar appliances (First Revision)

-----

9000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.31(Verification)	-	50	-
Cl.30(Verification)	-	50	-
CL.29(Verification)	-	50	-
Cl.28(Verification)	-	50	-
Cl.27(Verification)	-	50	-
Cl.26(Verification)	-	50	-
Cl.25(Verification)	-	50	-
Cl.24(Verification)	-	50	-
Cl.23(Verification)	-	50	-
Cl.22(Verification)	-	50	-
Cl.21(Verification)	-	50	-
Cl.20(Verification)	-	50	-
Cl.19(Verification)	-	50	-
Cl. 16(Verification)	-	50	-
Cl.15.1(Moisture Resistance)	-	50	-
Cl.14(Verification)	-	50	-
Cl.13(Verification)	-	50	-
Cl.11(Verification)	-	50	-
Cl.10(Verification)	-	50	-
Cl.8(Verification)	-	50	-
Cl. 7(Verification)	-	50	-
Cl. 6(Classification- IS 302-1)	-	50	-
Cl. 31 IS 302-2-9(Resistance To Rusting )	-	500	-
Cl. 30 IS 302-2-9(Resistance To Heat, Fire And Tracking)	-	500	-
Cl. 29 IS 302-2-9(Creepage Distances, Clearances And Distances Through Insulation)	-	500	-
Cl. 28 IS 302-2-9(Screws and Connections)	-	100	-
Cl. 27 IS 302-2-9(Provision For Earthing )	-	500	-
Cl. 26 IS 302-2-9(Terminal For External Conductors )	-	100	-
Cl. 25 IS 302-2-9(Supply Connections and External Flexible Cables and Cords )	-	500	-
Cl. 24 IS 302-2-9(Components)	-	200	-
Cl. 23 IS 302-2-9(Internal Wiring)	-	200	-
Cl. 22 IS 302-2-9(Construction )	-	200	-
Cl. 21 IS 302-2-9(Mechanical Strength)	-	200	-
Cl. 20 IS 302-2-9(Stability and mechanical Hazards)	-	200	-
Cl. 19 IS 302-2-9(Abnormal Operation )	-	500	-
Cl. 18 IS 302-2-9(Endurance)	-	200	-
Cl. 17 IS 302-2-9(Overload protection of transformers and associated circuits.)	-	200	-
Cl. 16 IS 302-2-9(Leakage Current and Electric strength )	-	500	-
Cl. 15 IS 302-2-9(Moisture Resistance)	-	500	-
Cl. 14 IS 302-2-9(Transient overvoltage)	-	500	-
Cl. 13.3 IS 302-2-9(Leakage Current & Electric Strength at Operating Temperature)	-	500	-
Cl. 11 IS 302-2-9(Heating)	-	500	-
Cl. 10 IS 302-2-9(Power Input and Current )	-	1000	-
Cl. 9 IS 302-2-9(Starting of motor operated appliances)	-	250	-
Cl. 8 IS 302-2-9(Protection against access to live parts)	-	500	-
Cl. 7 IS 302-2-9(Marking and Instruction)	-	200	-
Cl. 6 IS 302-2-9(Classification- IS 302-1)	-	200	-
31(Resistance to rusting)	-	50	-
31(Resistance to rusting)	-	50	-
30.2.4(Resistance to heat and fire)	-	50	-
30.2(Resistance to heat and fire)	-	50	-
30.1(Resistance to heat and fire)	-	50	-
29.3(Clearances, creepage distances and solid insulation)	-	50	-
29.2(Clearances, creepage distances and solid insulation)	-	50	-
29.2(Clearances, creepage distances and solid insulation)	-	50	-
29.1, Table No.- 16, Table No.- 17 & Table No.18(Clearances, creepage distances and solid insulation)	-	50	-
29.1, Table No.- 16, Table No.- 17 & Table No.18(Clearances, creepage distances and solid insulation)	-	50	-
28.2 to 28.4(Screws and connections)	-	50	-
28.1, Table No.-14(Screws and connections)	-	50	-
27.6(Provision for earthing)	-	50	-
27.5(Provision for earthing)	-	50	-
27.1 to 27.4(Provision for earthing)	-	50	-
26.10 & 26.11(Terminals for external conductors)	-	50	-
26.9(Terminals for external conductors)	-	50	-
26.1 to 26.8(Terminals for external conductors)	-	50	-
25.16 to 25.25(Supply connection and external flexible cords)	-	50	-
25.15(Supply connection and external flexible cords)	-	50	-
25.14(Supply connection and external flexible cords)	-	50	-
25.14(Supply connection and external flexible cords)	-	50	-
25.9 to 25.13(Supply connection and external flexible cords)	-	50	-
25.8, Table No.-11(Supply connection and external flexible cords)	-	50	-
25.5 to 25.7(Supply connection and external flexible cords)	-	50	-
25.4(Supply connection and external flexible cords)	-	50	-
25.3(Supply connection and external flexible cords)	-	50	-
25.2(Supply connection and external flexible cords)	-	50	-
25.1(Supply connection and external flexible cords)	-	50	-
24.101(Components)	-	50	-
24.101(Components)	-	50	-
24.2 to 24.6(Components)	-	50	-
24.1(Components)	-	50	-
23.6 to 23.10(Internal wiring)	-	50	-
23.5(Internal wiring)	-	50	-
23.4(Internal wiring)	-	50	-
23.3(Internal wiring)	-	50	-
23.1 & 23.2(Internal wiring)	-	50	-
22.111(Constructions)	-	50	-
22.111(Constructions)	-	50	-
22.11o(Constructions)	-	50	-
22.109(Constructions)	-	50	-
22.108(Constructions)	-	50	-
22.101 to 22.107(Constructions)	-	50	-
22.13 to 22.48(Constructions)	-	50	-
22.12(Constructions)	-	50	-
22.11(Constructions)	-	50	-
22.11(Constructions)	-	50	-
22.7 to 22.10(Constructions)	-	50	-
22.6(Constructions)	-	50	-
22.5(Constructions)	-	50	-
22.4(Constructions)	-	50	-
22.3(Constructions)	-	50	-
22.2(Constructions)	-	50	-
22.1(Constructions)	-	50	-
21.101(MECHANICAL STRENGTH)	-	50	-
21.101(MECHANICAL STRENGTH)	-	50	-
21.2(MECHANICAL STRENGTH)	-	50	-
21.1(MECHANICAL STRENGTH)	-	50	-
20.2(Stability and mechanical hazards)	-	50	-
20.1(Stability and mechanical hazards)	-	50	-
19.104(ABNORMAL OPERATION)	-	50	-
19.103(ABNORMAL OPERATION)	-	50	-
19.102(ABNORMAL OPERATION)	-	50	-
19.101(ABNORMAL OPERATION)	-	50	-
19.1 to 19.13, Table No. - 9(ABNORMAL OPERATION)	-	50	-
17(Overload protection of transformers and associated circuits)	-	50	-
16.3(Insulation resistance test)	-	50	-
16.3(Electric strength test)	-	50	-
16.1 & 16.2(Leakage current test)	-	50	-
15.3(Moisture resistance)	-	50	-
15.3(Moisture resistance)	-	50	-
15.3(Moisture resistance)	-	50	-
15.2(Moisture resistance)	-	50	-
15.2(Moisture resistance)	-	50	-
15.2(Moisture resistance)	-	50	-
15.2(Moisture resistance)	-	50	-
15.1(Moisture resistance)	-	50	-
14, Table No.- 6 & Table No.-16(Transient over voltages)	-	50	-
13.3 and Table No.- 4(Electric strength test)	-	50	-
13.1, 13.2(Leakage current test)	-	50	-
13.1, 13.2(Leakage current test)	-	50	-
11.101(Heating)	-	50	-
11.1 to 11.8, Table No.-3(Heating)	-	50	-
10.1 & 10.2 -Table No. 1, Table No. 2(Power Input and Current)	-	50	-
8.1.5(Protection against access to live parts)	-	50	-
8.1.4(Protection against access to live parts)	-	50	-
8.1.3(Protection against access to live parts)	-	50	-
8.1.2(Protection against access to live parts)	-	50	-
8.1, 8.1.1 & 8.2(Protection against access to live parts)	-	50	-
7.14(Legibility & Durability of Markings test)	-	50	-
7.1 to 7.13, 7.15, 7.16(Marking)	-	50	-
31(Resistance to rusting)	-	50	-
31(Resistance to rusting)	-	50	-
30.2.4(Resistance to heat and fire)	-	50	-
30.2(Resistance to heat and fire)	-	50	-
30.1(Resistance to heat and fire)	-	50	-
29.3(Clearances, creepage distances and solid insulation)	-	50	-
29.2(Clearances, creepage distances and solid insulation)	-	50	-
29.2(Clearances, creepage distances and solid insulation)	-	50	-
29.1, Table No.- 16, Table No.- 17 & Table No.18(Clearances, creepage distances and solid insulation)	-	50	-
29.1, Table No.- 16, Table No.- 17 & Table No.18(Clearances, creepage distances and solid insulation)	-	50	-
28.2 to 28.4(Screws and connections)	-	50	-
28.1, Table No.-14(Screws and connections)	-	50	-
27.6(Provision for earthing)	-	50	-
27.5(Provision for earthing)	-	50	-
27.1 to 27.4(Provision for earthing)	-	50	-
26.10 & 26.11(Terminals for external conductors)	-	50	-
26.9(Terminals for external conductors)	-	50	-
26.1 to 26.8(Terminals for external conductors)	-	50	-
25.16 to 25.25(Supply connection and external flexible cords)	-	50	-
25.15(Supply connection and external flexible cords)	-	50	-
25.14(Supply connection and external flexible cords)	-	50	-
25.9 to 25.13(Supply connection and external flexible cords)	-	50	-
25.8, Table No.-11(Supply connection and external flexible cords)	-	50	-
25.5 to 25.7(Supply connection and external flexible cords)	-	50	-
25.4(Supply connection and external flexible cords)	-	50	-
25.3(Supply connection and external flexible cords)	-	50	-
25.2(Supply connection and external flexible cords)	-	50	-
25.1(Supply connection and external flexible cords)	-	50	-
24.101(Components)	-	50	-
24.101(Components)	-	50	-
24.2 to 24.6(Components)	-	50	-
24.1(Components)	-	50	-
23.6 to 23.10(Internal wiring)	-	50	-
23.5(Internal wiring)	-	50	-
23.4(Internal wiring)	-	50	-
23.3(Internal wiring)	-	50	-
23.1 & 23.2(Internal wiring)	-	50	-
22.111(Constructions)	-	50	-
22.111(Constructions)	-	50	-
22.11o(Constructions)	-	50	-
22.109(Constructions)	-	50	-
22.108(Constructions)	-	50	-
22.101 to 22.107(Constructions)	-	50	-
22.13 to 22.48(Constructions)	-	50	-
22.12(Constructions)	-	50	-
22.11(Constructions)	-	50	-
22.11(Constructions)	-	50	-
22.7 to 22.10(Constructions)	-	50	-
22.6(Constructions)	-	50	-
22.5(Constructions)	-	50	-
22.4(Constructions)	-	50	-
22.3(Constructions)	-	50	-
22.2(Constructions)	-	50	-
21.101(MECHANICAL STRENGTH)	-	50	-
21.101(MECHANICAL STRENGTH)	-	50	-
21.2(MECHANICAL STRENGTH)	-	50	-
21.1(MECHANICAL STRENGTH)	-	50	-
20.2(Stability and mechanical hazards)	-	50	-
20.1(Stability and mechanical hazards)	-	50	-
19.104(ABNORMAL OPERATION)	-	50	-
19.103(ABNORMAL OPERATION)	-	50	-
19.102(ABNORMAL OPERATION)	-	50	-
19.101(ABNORMAL OPERATION)	-	50	-
19.1 to 19.13, Table No. - 9(ABNORMAL OPERATION)	-	50	-
17(Overload protection of transformers and associated circuits)	-	50	-
16.3(Insulation resistance test)	-	50	-
16.1 & 16.2(Leakage current test)	-	50	-
15.3(Moisture resistance)	-	50	-
15.3(Moisture resistance)	-	50	-
15.3(Moisture resistance)	-	50	-
15.2(Moisture resistance)	-	50	-
15.2(Moisture resistance)	-	50	-
15.2(Moisture resistance)	-	50	-
15.2(Moisture resistance)	-	50	-
15.1(Moisture resistance)	-	50	-
14, Table No.- 6 & Table No.-16(Transient over voltages)	-	50	-
13.3 and Table No.- 4(Electric strength test)	-	50	-
13.1, 13.2(Leakage current test)	-	50	-
13.1, 13.2(Leakage current test)	-	50	-
11.101(Heating)	-	50	-
11.1 to 11.8, Table No.-3(Heating)	-	50	-
10.1 & 10.2 -Table No. 1, Table No. 2(Power Input and Current)	-	50	-
8.1.5(Protection against access to live parts)	-	50	-
8.1.4(Protection against access to live parts)	-	50	-
8.1.3(Protection against access to live parts)	-	50	-
8.1.2(Protection against access to live parts)	-	50	-
8.1, 8.1.1 & 8.2(Protection against access to live parts)	-	50	-
7.14(Legibility & Durability of Markings test)	-	50	-
7.1 to 7.13, 7.15, 7.16(Marking)	-	50	-
31(Resistance to Rusting)	-	50	-
30(Resistance to Heat & Fire)	-	50	-
29(Clearances, Creepage Distances & Solid Insulation)	-	50	-
28(Screws & Connections)	-	50	-
27(Provision For Earthing)	-	50	-
26(Terminals For External Conductors)	-	50	-
25(Supply Connection & External Flexible Cords)	-	50	-
24(Components)	-	50	-
23(Internal wiring)	-	50	-
22(Construction)	-	50	-
21(Mechanical strength)	-	50	-
20(Stability & Mechanical Hazards)	-	50	-
19(Abnormal Operation)	-	50	-
17(Overload Protection/ Overload Protection of Transformers & Associated Circuits)	-	50	-
16(Leakage Current and Electric Strength)	-	50	-
15(Moisture Resistance)	-	50	-
14(Transient Over Voltage)	-	50	-
13(Leakage Current and Electric Strength at Operating Temperature)	-	50	-
11(Temperature Rise/ Heating)	-	50	-
10(Power Input & Current)	-	50	-
9(Starting Of Motor Operated Appliances)	-	50	-
8(Protection against access to live parts)	-	50	-
31(Resistance to Rusting)	-	50	-
30(Resistance to Heat & Fire)	-	50	-
29(Clearances, Creepage Distances & Solid Insulation)	-	50	-
28(Screws & Connections)	-	50	-
27(Provision For Earthing)	-	50	-
26(Terminals For External Conductors)	-	50	-
25(Supply Connection & External Flexible Cords)	-	50	-
24(Components)	-	50	-
23(Internal wiring)	-	50	-
22(Construction)	-	50	-
21(Mechanical strength)	-	50	-
20(Stability & Mechanical Hazards)	-	50	-
19(Abnormal Operation)	-	50	-
17(Overload Protection/ Overload Protection of Transformers & Associated Circuits)	-	50	-
16(Leakage Current and Electric Strength)	-	50	-
15(Moisture Resistance)	-	50	-
14(Transient Over Voltage)	-	50	-
13(Leakage Current and Electric Strength at Operating Temperature)	-	50	-
11(Temperature Rise/ Heating)	-	50	-
10(Power Input & Current)	-	50	-
9(Starting Of Motor Operated Appliances)	-	50	-
8(Protection against access to live parts)	-	50	-
25.14(Supply connection and external flexible cords)	-	50	-
22.1(Constructions)	-	50	-
16.3(Electric strength test)	-	50	-

03 Oct, 2027

-
Included.w.e.f.07.11.2024 Exclusion 32 (RADIATION, TOXICITY AND SIMILAR HAZARDS) 19.11.4.1 to 19.11.4.5 (EMI/EMC)

IS 302 : Part 2 : Sec 6 (2009)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 6 cooking ranges, hobs, ovens and similar appliances (First Revision)

-----

14500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.0(Classification)	-	200	-
7.0(Marking and instructions)	-	500	-
8.0(Protection against access to live part test)	-	500	-
10.0(Power Input and current test)	-	1500	-
11.0(Heating test)	-	1000	-
13.0(Leakage current and electric strength test)	-	1000	-
14.0(Transient voltages)	-	500	-
15.0(Moisture Resistance)	-	700	-
16.0(Leakage current and electric strength test)	-	700	-
17.0(Overload protection of transformers test)	-	100	-
18.0(Endurance test)	-	100	-
19.0(Abnormal Operations)	-	1000	-
20.0(Stability and Mechanical Hazards)	-	500	-
21.0(Mechanical Strength)	-	500	-
22.0(Construction verification related tests)	-	500	-
23.0(Internal wiring)	-	500	-
24.0(Components)	-	500	-
25.0(Supply connections and External Flexible Cords)	-	1000	-
26.0(Terminal for External Conductors)	-	150	-
27.0(Provision for Earthing)	-	1000	-
28.0(Screws and connections)	-	400	-
29.0(Clearances and Creepage distances and solid insulation)	-	500	-
30.0(Resistance to heat and fire)	-	500	-
31.0(Resistance to rusting)	-	500	-
4(General Requirements)	-	50	-
5(General condition for the tests)	-	50	-
9.0(Starting of motor-operated appliances test)	-	50	-
6.0(Classification)	-	200	-
7.0(Marking and instructions)	-	500	-
8.0(Protection against access to live part test)	-	500	-
10.0(Power Input and current test)	-	1500	-
11.0(Heating test)	-	1000	-
13.0(Leakage current and electric strength test)	-	1000	-
14.0(Transient voltages)	-	500	-
15.0(Moisture Resistance)	-	700	-
16.0(Leakage current and electric strength test)	-	700	-
17.0(Overload protection of transformers test)	-	100	-
18.0(Endurance test)	-	100	-
19.0(Abnormal Operations)	-	1000	-
20.0(Stability and Mechanical Hazards)	-	500	-
21.0(Mechanical Strength)	-	500	-
22.0(Construction verification related tests)	-	500	-
23.0(Internal wiring)	-	500	-
24.0(Components)	-	500	-
25.0(Supply connections and External Flexible Cords)	-	1000	-
26.0(Terminal for External Conductors)	-	150	-
27.0(Provision for Earthing)	-	1000	-
28.0(Screws and connections)	-	400	-
29.0(Clearances and Creepage distances and solid insulation)	-	500	-
30.0(Resistance to heat and fire)	-	500	-
31.0(Resistance to rusting)	-	500	-
4(General Requirements)	-	50	-
5(General condition for the tests)	-	50	-
9.0(Starting of motor-operated appliances test)	-	50	-
6.0(Classification)	-	200	-
7.0(Marking and instructions)	-	0	-
8.0(Protection against access to live part test)	-	500	-
10.0(Power Input and current test)	-	1500	-
11.0(Heating test)	-	1000	-
13.0(Leakage current and electric strength test)	-	1000	-
14.0(Transient voltages)	-	500	-
15.0(Moisture Resistance)	-	700	-
16.0(Leakage current and electric strength test)	-	700	-
17.0(Overload protection of transformers test)	-	100	-
18.0(Endurance test)	-	100	-
19.0(Abnormal Operations)	-	1000	-
20.0(Stability and Mechanical Hazards)	-	500	-
21.0(Mechanical Strength)	-	500	-
22.0(Construction verification related tests)	-	500	-
23.0(Internal wiring)	-	500	-
24.0(Components)	-	500	-
25.0(Supply connections and External Flexible Cords)	-	1000	-
26.0(Terminal for External Conductors)	-	150	-
27.0(Provision for Earthing)	-	1000	-
28.0(Screws and connections)	-	400	-
29.0(Clearances and Creepage distances and solid insulation)	-	500	-
30.0(Resistance to heat and fire)	-	500	-
31.0(Resistance to rusting)	-	500	-
4(General Requirements)	-	50	-
5(General condition for the tests)	-	50	-
9.0(Starting of motor-operated appliances test)	-	50	-
6.0(Classification)	-	200	-
7.0(Marking and instructions)	-	500	-
8.0(Protection against access to live part test)	-	500	-
10.0(Power Input and current test)	-	1500	-
11.0(Heating test)	-	1000	-
13.0(Leakage current and electric strength test)	-	1000	-
14.0(Transient voltages)	-	500	-
15.0(Moisture Resistance)	-	700	-
16.0(Leakage current and electric strength test)	-	700	-
17.0(Overload protection of transformers test)	-	100	-
18.0(Endurance test)	-	100	-
19.0(Abnormal Operations)	-	1000	-
20.0(Stability and Mechanical Hazards)	-	500	-
21.0(Mechanical Strength)	-	500	-
22.0(Construction verification related tests)	-	500	-
23.0(Internal wiring)	-	500	-
24.0(Components)	-	500	-
25.0(Supply connections and External Flexible Cords)	-	1000	-
26.0(Terminal for External Conductors)	-	150	-
27.0(Provision for Earthing)	-	1000	-
28.0(Screws and connections)	-	400	-
29.0(Clearances and Creepage distances and solid insulation)	-	500	-
30.0(Resistance to heat and fire)	-	500	-
31.0(Resistance to rusting)	-	500	-
4(General Requirements)	-	50	-
5(General condition for the tests)	-	50	-
9.0(Starting of motor-operated appliances test)	-	50	-
6.0(Classification)	-	200	-
7.0(Marking and instructions)	-	500	-
8.0(Protection against access to live part test)	-	500	-
10.0(Power Input and current test)	-	1500	-
11.0(Heating test)	-	1000	-
13.0(Leakage current and electric strength test)	-	1000	-
14.0(Transient voltages)	-	500	-
15.0(Moisture Resistance)	-	700	-
16.0(Leakage current and electric strength test)	-	700	-
17.0(Overload protection of transformers test)	-	100	-
18.0(Endurance test)	-	100	-
19.0(Abnormal Operations)	-	1000	-
20.0(Stability and Mechanical Hazards)	-	500	-
21.0(Mechanical Strength)	-	500	-
22.0(Construction verification related tests)	-	500	-
23.0(Internal wiring)	-	500	-
24.0(Components)	-	500	-
25.0(Supply connections and External Flexible Cords)	-	1000	-
26.0(Terminal for External Conductors)	-	150	-
27.0(Provision for Earthing)	-	1000	-
28.0(Screws and connections)	-	400	-
29.0(Clearances and Creepage distances and solid insulation)	-	500	-
30.0(Resistance to heat and fire)	-	500	-
31.0(Resistance to rusting)	-	500	-
4(General Requirements)	-	50	-
5(General condition for the tests)	-	50	-
9.0(Starting of motor-operated appliances test)	-	50	-

03 Oct, 2027

-
Included.w.e.f.05.11.2024 Exclusion 32 (RADIATION, TOXICITY AND SIMILAR HAZARDS) 19.11.4.1 to 19.11.4.5 (EMI/EMC)

Bureau of Indian Standards

The National Standards Body of India

ALAIPURIA TEST HOUSE PRIVATE LIMITED, GHAZIABAD

H-11 Durga Industrial Park, Near Major Mohit Sharma Rajender Nagar Metro Station, Sahibabad, Ghaziabad,, Ghaziabad, Ghaziabad, Uttar Pradesh, 201005

9873900201 alaipuriatesthouse44@gmail.com

Scope List