BIS - LIMS (Laboratory Information Management System)

Testtex India Laboratories Private Limited, Noida

C - 57, Sector - 65, Noida, Gautam Buddha Nagar, Uttar Pradesh, 201301

9821318289 labsindianoida@testtex.com

Scope List

Reset

42 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

IS 5557 (2004)

Industrial and protective rubber knee and ankle boots - Specification (Fourth Revision)

Industrial and protective rubber knee and ankle boots

16600 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5/5.1.7/5.1.7.8(REQUIREMENTS- Physical Requirements-Resistance to oil)	-	2000	-
5/5.1.1-Fig. 1, Fig. 2 and Fig. 3(REQUIREMENTS-Design)	-	0	-
5/5.1.2 -IS 1638(REQUIREMENTS-Size)	-	0	-
5/5.1.3-Table1(REQUIREMENTS-Thickness)	-	300	-
5/5.1.4/5.1.4.1-Table2(REQUIREMENTS-Materials-Rubber components)	-	6500	Complete Table 2
5/5.1.4/5.1.4.2(REQUIREMENTS-Materials-Fabric- accordance with IS 1969)	-	700	-
5/5.1.4/5.1.4.3(REQUIREMENTS-Materials-Protective Steel Toe Cap- an per IS 5852)	-	3000	Impact Test, Finish, Rust Preventive
5/5.1.6/5.1.6.1-Fig. 1, Fig. 2, Fig. 3, .Fig. 4, Fig. 5 and Table 3.(REQUIREMENTS- Construction)	-	0	-
5/5.1.6/5.1.6.2(REQUIREMENTS- Construction)	-	0	-
5/5.1.7/5.1.7.1(REQUIREMENTS- Physical Requirements-Heat treatment- as per IS 3400 (Part 4))	-	500	-
5/5.1.7/5.1.7.2(REQUIREMENTS- Physical Requirements-Composite strength)	-	1000	-
5/5.1.7/5.1.7.3-Table 4(REQUIREMENTS- Physical Requirements-Flexing endurance- as per Annex B.)	-	1000	-
5/5.1.7/5.1.7.4(REQUIREMENTS- Physical Requirements- Leakage resistance test)	-	1000	-
5/5.1.7/5.1.7.5(REQUIREMENTS- Physical Requirements- Consolidation test- as per IS IS 3400 (Part 5))	-	1000	-
5/5.1.7/5.1.7.6(REQUIREMENTS- Physical Requirements- Performance test- as per Annex C)	-	2000	-
5/5.1.7/5.1.7.7(REQUIREMENTS- Physical Requirements-Height of the boots)	-	300	-
5/5.1.7/5.1.7.8(REQUIREMENTS- Physical Requirements-Resistance to oil)	-	0	Clause Repeated
5/5.1.1-Fig. 1, Fig. 2 and Fig. 3(REQUIREMENTS-Design)	-	0	Clause Repeated
5/5.1.2 -IS 1638(REQUIREMENTS-Size)	-	0	Clause Repeated
5/5.1.3-Table1(REQUIREMENTS-Thickness)	-	0	Clause Repeated
5/5.1.4/5.1.4.1-Table2(REQUIREMENTS-Materials-Rubber components)	-	0	Clause Repeated
5/5.1.4/5.1.4.2(REQUIREMENTS-Materials-Fabric- accordance with IS 1969)	-	0	Clause Repeated
5/5.1.4/5.1.4.3(REQUIREMENTS-Materials-Protective Steel Toe Cap- an per IS 5852)	-	0	Clause Repeated
5/5.1.6/5.1.6.1-Fig. 1, Fig. 2, Fig. 3, .Fig. 4, Fig. 5 and Table 3.(REQUIREMENTS- Construction)	-	0	Clause Repeated
5/5.1.6/5.1.6.2(REQUIREMENTS- Construction)	-	0	Clause Repeated
5/5.1.7/5.1.7.1(REQUIREMENTS- Physical Requirements-Heat treatment- as per IS 3400 (Part 4))	-	0	Clause Repeated
5/5.1.7/5.1.7.2(REQUIREMENTS- Physical Requirements-Composite strength)	-	0	Clause Repeated
5/5.1.7/5.1.7.3-Table 4(REQUIREMENTS- Physical Requirements-Flexing endurance- as per Annex B.)	-	0	Clause Repeated
5/5.1.7/5.1.7.4(REQUIREMENTS- Physical Requirements- Leakage resistance test)	-	0	Clause Repeated
5/5.1.7/5.1.7.5(REQUIREMENTS- Physical Requirements- Consolidation test- as per IS IS 3400 (Part 5))	-	0	Clause Repeated
5/5.1.7/5.1.7.6(REQUIREMENTS- Physical Requirements- Performance test- as per Annex C)	-	0	Clause Repeated
5/5.1.7/5.1.7.7(REQUIREMENTS- Physical Requirements-Height of the boots)	-	0	Clause Repeated
5/5.1.7/5.1.7.8(REQUIREMENTS- Physical Requirements-Resistance to oil)	-	0	Clause Repeated
5/5.1.1-Fig. 1, Fig. 2 and Fig. 3(REQUIREMENTS-Design)	-	0	Clause Repeated
5/5.1.2 -IS 1638(REQUIREMENTS-Size)	-	0	Clause Repeated
5/5.1.3-Table1(REQUIREMENTS-Thickness)	-	0	Clause Repeated
5/5.1.4/5.1.4.1-Table2(REQUIREMENTS-Materials-Rubber components)	-	0	Clause Repeated
5/5.1.4/5.1.4.2(REQUIREMENTS-Materials-Fabric- accordance with IS 1969)	-	0	Clause Repeated
5/5.1.4/5.1.4.3(REQUIREMENTS-Materials-Protective Steel Toe Cap- an per IS 5852)	-	0	Clause Repeated
5/5.1.6/5.1.6.1-Fig. 1, Fig. 2, Fig. 3, .Fig. 4, Fig. 5 and Table 3.(REQUIREMENTS- Construction)	-	0	Clause Repeated
5/5.1.6/5.1.6.2(REQUIREMENTS- Construction)	-	0	Clause Repeated
5/5.1.7/5.1.7.1(REQUIREMENTS- Physical Requirements-Heat treatment- as per IS 3400 (Part 4))	-	0	Clause Repeated
5/5.1.7/5.1.7.2(REQUIREMENTS- Physical Requirements-Composite strength)	-	0	Clause Repeated
5/5.1.7/5.1.7.3-Table 4(REQUIREMENTS- Physical Requirements-Flexing endurance- as per Annex B.)	-	0	Clause Repeated
5/5.1.7/5.1.7.4(REQUIREMENTS- Physical Requirements- Leakage resistance test)	-	0	Clause Repeated
5/5.1.7/5.1.7.5(REQUIREMENTS- Physical Requirements- Consolidation test- as per IS IS 3400 (Part 5))	-	0	Clause Repeated
5/5.1.7/5.1.7.6(REQUIREMENTS- Physical Requirements- Performance test- as per Annex C)	-	0	Clause Repeated
5/5.1.7/5.1.7.7(REQUIREMENTS- Physical Requirements-Height of the boots)	-	0	Clause Repeated
5, 5.1(Requirement)	-	0	Clause Repeated
6.1(Marking)	-	0	-
6, 6.1(Packing)	-	0	-
5, 5.1(Requirement)	-	0	Clause Repeated
6.1(Marking)	-	0	Clause Repeated
6.2(Packing)	-	0	Clause Repeated

31 Dec, 2029

-
Included w.e.f. 24.06.2024

IS 5676 (1995)

Moulded solid rubber soles and heels - SpecificatlOn (Second Revision)

Moulded solid rubber soles and heels

9600 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5/5.3/5.3.1(REQUIREMENTS- Construction)	-	300	-
5/5.1(REQUIREMENTS-General)	-	0	-
5/5.2- Fig. 1 to 5(REQUIREMENTS-Design)	-	0	-
5/5.5- Table1(REQUIREMENTS-Thickness)	-	300	-
5/5.6/5.6.1(REQUIREMENTS-Channel)	-	300	-
5/5.7- Table2(REQUIREMENTS- Physical Requirements- as per IS 3400 (Part 1, Part 2, Part 4, Part 9, Part 10, Part 16))	-	8700	IS 3400 Part 1, 2, 4, 9, 10, 16)
5/5.3/5.3.1(REQUIREMENTS- Construction)	-	0	Repeated
5/5.1(REQUIREMENTS-General)	-	0	Repeated
5/5.2- Fig. 1 to 5(REQUIREMENTS-Design)	-	0	Repeated
5/5.5- Table1(REQUIREMENTS-Thickness)	-	0	Repeated
5/5.6/5.6.1(REQUIREMENTS-Channel)	-	0	Repeated
5/5.7- Table2(REQUIREMENTS- Physical Requirements- as per IS 3400 (Part 1, Part 2, Part 4, Part 9, Part 10, Part 16))	-	0	Repeated
5/5.3/5.3.1(REQUIREMENTS- Construction)	-	0	Repeated
5/5.1(REQUIREMENTS-General)	-	0	Repeated
5/5.2- Fig. 1 to 5(REQUIREMENTS-Design)	-	0	Repeated
5/5.5- Table1(REQUIREMENTS-Thickness)	-	0	Repeated
5/5.6/5.6.1(REQUIREMENTS-Channel)	-	0	Repeated
5/5.7- Table2(REQUIREMENTS- Physical Requirements- as per IS 3400 (Part 1, Part 2, Part 4, Part 9, Part 10, Part 16))	-	0	Repeated
6(Marking and packing)	-	0	Repeated
8.1(Test methods)	-	0	Repeated
8.3(Measurement of thickness)	-	0	Repeated
Cl.6.1,6.2,6.3(Marking and packing)	-	0	Repeated
8.1(Test Methods)	-	0	Repeated
Cl.8.3(Measurement of thickness ")	-	0	Repeated
5.5 (Amendment 1)(Thickness)	-	0	Repeated
5.7 Table 2 i) (Amendment 1)(Relative Density)	-	0	Repeated
5.7, Table 2 ii) (Amendment 1)(Hardness, degree, Shore A)	-	0	Repeated
5.7, Table 2 iv) (Amendment 1)(Abrasion Resistance at applied force of 10 N)	-	0	Repeated
5.7, Table 2 v) (Amendment 1)(Tensile strength)	-	0	Repeated
5.7, Table 2 vi) (Amendment 1)(Elongation at break)	-	0	Repeated
5.7, Table 2 vii) (Amendment 1)(Tear strength (average force))	-	0	Repeated
5.7, Table 2 iii) (Amendment 1)(Flexing resistance)	-	0	Repeated

31 Dec, 2029

-
Included w.e.f. 03.10.2024

IS 6664 (1992)

Rubber microcellular sheets for soles and heels - Specification (First Revision)

Microcellular Rubber Sheets for Outsoles

8950 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4, Cl.4.1,4.1.1,4.1.2(Requirements)	-	0	-
Cl.4 Cl.4.1.3 And 8.3,Table1, i)(Relative density)	-	500	-
Cl.4.1.3 And 8.3,Table1, iii)(Hardness, Shore A durometer min)	-	500	-
Cl.4 Cl.4.1.3 And 8.3,Table1, iii)(Change in Hardness after ageing at 100±1°C for 24hr)	-	1500	-
Cl.4 Cl.4.1.3 And 8.3,Table1, iv)(Compression set at constant stress percent, Max)	-	1000	-
Cl.4 Cl.4.1.3 And 8.3,Table1, v)(Split tear strength, kg,Min)	-	1000	-
Cl.4 Cl.4.1.3 And 8.3,Table1, vi)(Room Temperature shrinkage at 27±2°C for 2weeks, percent, Max)	-	1000	-
Cl.4 Cl.4.1.3 And 8.3,Table 1, vi)(Heat shrinkage test at 100±1°C for 1 hour max)	-	1000	-
Cl.4 Cl.4.1.3 And 8.3,Table1, viii)(Water absorption , percent by mass, Max)	-	1000	-
Cl.4 Cl.4.1.3 And 8.3,Table 1, viii)(Flexing resistance: Maximum cut growth at 50 000 cycles)	-	1000	-
4.2(Flexing resistance )	-	0	Clause Repeated
4.2(Water absorption)	-	0	Wrong test description
4.2(Heat Shrinkage )	-	0	Clause Repeated
4.2(Shrinkage at room temp)	-	0	Clause Repeated
4.2(Split tear strength)	-	0	Clause Repeated
4.2(Compression set)	-	0	Clause Repeated
4.2(Hardness (Shore A))	-	0	Clause Repeated
4.2(Density )	-	0	Clause Repeated
4.2(Size & Thickness )	-	0	-
5, 5.1(Marking)	-	0	-
6, 6.1(Packing)	-	0	-
"Cl.4 ,Cl.4.1,4.1.1,4.1.2(Requirements ")	-	0	Clause Repeated
Cl.4.1.3 And 8.3,Table1(i) Relative density)	-	500	-
Cl.4.1.3 And 8.3,Table1(ii) Hardness, Shore A durometer min)	-	500	-
Cl.4.1.3 And 8.3,Table1(iii) Change in Hardness after ageing at 100±1°C for 24hr)	-	0	Clause Repeated
Cl.4.1.3 And 8.3,Table1(iv) Compression set at constant stress percent, Max)	-	1000	-
Cl.4.1.3 And 8.3,Table1(vi) Room Temperature shrinkage at 27±2°C for 2weeks, percent, Max)	-	0	Clause Repeated
Cl.4.1.3 And 8.3,Table 1 vi(Heat shrinkage test at 100±1°C for 1 hour max)	-	0	Clause Repeated
Cl.4.1.3 And 8.3,Table1(ix)Flexing resistance)	-	0	Clause Repeated
5, 5.1(Marking)	-	0	Clause Repeated
6, 6.1(Packing)	-	0	Clause Repeated
Cl.4.1.3 And 8.3,Table1(viii)Water absorption , percent by mass, Max)	-	0	Clause Repeated

31 Dec, 2029

-
Table-1 (Compression set at constant stress) scope restsricted to method B of Annex-D of IS 10702 Included along with Amendment No.1 w.e.f. 24.06.2024

IS 6719 (1972)

Solid Pvc Soles And Heels

4750 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 3.1,3.2,3.3,3.4,3.5(Material)	-	0	-
3.6 (i)(Relative density )	-	500	-
3.6 (ii)(Tensile Strength )	-	750	-
3.6 (iii)(Elongation at break, percent )	-	750	-
3.6 (iv)(Tear Strength a) Force Part b) Back Part )	-	750	-
3.6 (v)(Volatility, percent by means )	-	500	-
3.6 (vi)(Lead (as Pb) ppm)	-	1000	-
3.6.1(Hardness )	-	500	-
6 ,6.1,6.2,6.3(Test Method)	-	0	-
Cl. 6.4(Measurement of thickness)	-	0	-
Cl. 3.1,3.2,3.3,3.4,3.5(Material)	-	0	-

31 Dec, 2029

-
Included along with Amendment No.1 w.e.f. 24.06.2024

IS 15298 : part 4 (2017)

Personal protective equipment: Part 4 occupational footwear (Second Revision)

Occupational Footwear

54200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Table 1(CLASS I)	-	200	-
Table 1(CLASS II)	-	200	-
5.2.2.1(General)	-	500	-
5.2.2.2(Height of upper)	-	300	-
5.2.2.3(Seat region)	-	300	-
5.3.2.1(Construction)	-	300	-
5.3.1.2(Upper/outsole bond strength)	-	700	-
5.3.2.2(Leakproofness)	-	500	-
5.3.2.3(Specific ergonomic features )	-	1000	-
5.3.2.5(Innocuousness )	-	26500	-
5.4.2.1(Upper)	-	300	-
5.4.2.2(Thickness )	-	300	-
5.4.2.3(Tear strenth)	-	500	-
5.4.2.4(Tensile properties)	-	500	-
5.4.2.5(Flexing resistance )	-	1000	-
5.4.2.6(Water vapour permeability and coefficient )	-	700	-
5.4.2.7(pH value )	-	500	-
5.4.2.8(Hydrolysis)	-	3500	-
5.4.2.9(Chromium VI content )	-	750	-
5.5.2.1(Tear strength )	-	500	-
5.5.2.2(Abrasion resistance )	-	700	-
5.5.2.3(Water vapour permeability and coefficient )	-	700	-
5.5.2.4(pH value )	-	500	-
5.5.2.5(Chromium VI content )	-	750	-
5.6(Tongue )	-	0	-
5.6.2.1(Tear strength )	-	500	-
5.6.2.2(pH value )	-	500	-
5.6.2.3(Chromium VI content )	-	750	-
5.7.2.1(Insole and insock )	-	300	-
5.7.2.2(Insole and insock )	-	500	-
5.7.2.3(Water absorption and desorption )	-	500	-
5.7.4.1(Abrasion resistance )	-	400	-
5.7.4.2(Abrasion resistance )	-	700	-
5.7.2.5(Chromium VI content )	-	750	-
5.8.2.1(Outsole)	-	0	-
5.8.1.1(Thickness )	-	300	-
5.8.1.2(Cleated area )	-	300	-
5.8.1.3(Cleat height)	-	300	-
5.8.2.2(Tear strength )	-	500	-
5.8.2.3(Abrasion resistance )	-	700	-
5.8.2.4(Flexing resistance )	-	700	-
5.8.2.5(Hydrolysis )	-	3500	-
5.8.2.6(Interlayer bond strength )	-	700	-
6.2.1.1(Metallic anti-penetration insert )	-	1000	-
6.2.1.1.2(Non-metallic anti-penetration insert used as an insole)	-	1000	-
6.2.1.2(Construction)	-	200	-
6.2.1.3(Dimensions )	-	300	-
6.2.1.4(Flex resistance of penetration-resistant inserts )	-	2500	-
6.2.1.5.1(Corrosion resistance of penetration-resistant metallic inserts)	-	500	-
6.2.1.5.2(Penetration-resistant non-metallic inserts)	-	1000	-
6.2.2.1(Conductive footwear)	-	1000	-
6.2.2.2(Antistatic footwear)	-	1000	-
6.2.3.1(Heat insulation of sole complex )	-	700	-
6.2.3.2(Cold insulation of sole complex)	-	700	-
6.2.2.4(Energy absorption of seat region )	-	2000	-
6.2.2.5(Water resistance )	-	500	-
6.2.7.1(Cut resistance foot wear)	-	0	-
6.2.7.2(Cut resistance foot wear)	-	0	-
6.2.7.3(Resistance to cutting)	-	2500	-
6.2.7.4(Pentration resistance)	-	1000	-
6.3.2.2(Upper- water penetration)	-	1000	-
6.4.2.1(Resistance to hot contact)	-	700	-
6.4.2.2(Resistance to fuel oil)	-	700	-
7(a)(Marking)	-	0	-
7(b)(Marking)	-	0	-
7(c)(Marking)	-	0	-
7(d)(Marking)	-	0	-
7(e)(Marking)	-	0	-
7(e)(Marking)	-	0	-
Table 1(CLASS I)	-	0	Clause Repeated
Table 1(CLASS II)	-	0	Clause Repeated
5.2.2.1(General)	-	0	Clause Repeated
5.2.2.2(Height of upper)	-	0	Clause Repeated
5.2.2.3(Seat region)	-	0	Clause Repeated
5.3.2.1(Construction)	-	0	Clause Repeated
5.3.1.2(Upper/outsole bond strength)	-	0	Clause Repeated
5.3.2.2(Leakproofness)	-	0	Clause Repeated
5.3.2.3(Specific ergonomic features )	-	0	Clause Repeated
5.3.2.5(Innocuousness )	-	0	Clause Repeated
5.4.2.1(Upper)	-	0	Clause Repeated
5.4.2.2(Thickness )	-	0	Clause Repeated
5.4.2.3(Tear strenth)	-	0	Clause Repeated
5.4.2.4(Tensile properties)	-	0	Clause Repeated
5.4.2.5(Flexing resistance )	-	0	Clause Repeated
5.4.2.6(Water vapour permeability and coefficient )	-	0	Clause Repeated
5.4.2.7(pH value )	-	0	Clause Repeated
5.4.2.8(Hydrolysis)	-	0	Clause Repeated
5.4.2.9(Chromium VI content )	-	0	Clause Repeated
5.5.2.1(Tear strength )	-	0	Clause Repeated
5.5.2.2(Abrasion resistance )	-	0	Clause Repeated
5.5.2.3(Water vapour permeability and coefficient )	-	0	Clause Repeated
5.5.2.4(pH value )	-	0	Clause Repeated
5.5.2.5(Chromium VI content )	-	0	Clause Repeated
5.6(Tongue )	-	0	Clause Repeated
5.6.2.1(Tear strength )	-	0	Clause Repeated
5.6.2.2(pH value )	-	0	Clause Repeated
5.6.2.3(Chromium VI content )	-	0	Clause Repeated
5.7.2.1(Insole and insock )	-	0	Clause Repeated
5.7.2.2(Insole and insock )	-	0	Clause Repeated
5.7.2.3(Water absorption and desorption )	-	0	Clause Repeated
5.7.4.1(Abrasion resistance )	-	0	Clause Repeated
5.7.4.2(Abrasion resistance )	-	0	Clause Repeated
5.7.2.5(Chromium VI content )	-	0	Clause Repeated
5.8.2.1(Outsole)	-	0	Clause Repeated
5.8.1.1(Thickness )	-	0	Clause Repeated
5.8.1.2(Cleated area )	-	0	Clause Repeated
5.8.1.3(Cleat height)	-	0	Clause Repeated
5.8.2.2(Tear strength )	-	0	Clause Repeated
5.8.2.3(Abrasion resistance )	-	0	Clause Repeated
5.8.2.4(Flexing resistance )	-	0	Clause Repeated
5.8.2.5(Hydrolysis )	-	0	Clause Repeated
5.8.2.6(Interlayer bond strength )	-	0	Clause Repeated
6.2.1.1(Metallic anti-penetration insert )	-	0	Clause Repeated
6.2.1.1.2(Non-metallic anti-penetration insert used as an insole)	-	0	Clause Repeated
6.2.1.2(Construction)	-	0	Clause Repeated
6.2.1.3(Dimensions )	-	0	Clause Repeated
6.2.1.4(Flex resistance of penetration-resistant inserts )	-	0	Clause Repeated
6.2.1.5.1(Corrosion resistance of penetration-resistant metallic inserts)	-	0	Clause Repeated
6.2.1.5.2(Penetration-resistant non-metallic inserts)	-	0	Clause Repeated
6.2.2.1(Conductive footwear)	-	0	Clause Repeated
6.2.2.2(Antistatic footwear)	-	0	Clause Repeated
6.2.3.1(Heat insulation of sole complex )	-	0	Clause Repeated
6.2.3.2(Cold insulation of sole complex)	-	0	Clause Repeated
6.2.2.4(Energy absorption of seat region )	-	0	Clause Repeated
6.2.2.5(Water resistance )	-	0	Clause Repeated
6.2.7.1(Cut resistance foot wear)	-	0	Clause Repeated
6.2.7.2(Cut resistance foot wear)	-	0	Clause Repeated
6.2.7.3(Resistance to cutting)	-	0	Clause Repeated
6.2.7.4(Pentration resistance)	-	0	Clause Repeated
6.3.2.2(Upper- water penetration)	-	0	Clause Repeated
6.4.2.1(Resistance to hot contact)	-	0	Clause Repeated
6.4.2.2(Resistance to fuel oil)	-	0	Clause Repeated
7(a)(Marking)	-	0	Clause Repeated
7(b)(Marking)	-	0	Clause Repeated
7(c)(Marking)	-	0	Clause Repeated
7(d)(Marking)	-	0	Clause Repeated
7(e)(Marking)	-	0	Clause Repeated
7(e)(Marking)	-	0	Clause Repeated
5.3.4.1(Slip resistance)	-	2000	-
5.3.4.2(Slip resistance on ceramic tile floor with sodium lauryl sulphate (SLS) solution)	-	0	Inclusive in Clause 5.3.4.1
5.3.4.3(Slip resistance on steel floor with glycerine )	-	0	Inclusive in Clause 5.3.4.1
5.3.4.4(Slip resistance on ceramic tile floor with SLS and on steel floor with glycerine )	-	0	Inclusive in Clause 5.3.4.1

31 Dec, 2029

-
Included w.e.f. 03.10.2024 Exclusion: for all types of footwear except electrically insulated footwear, ankle protection footwear, Cl.5.3.2.5 innocuousness allergenic and carcinogenic disperse dyes

IS 15298 : Part 3 (2019)

Personal protective equipment: Part 3 protective footwear (Second Revision)

Protective footwear

41475 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.2.2 Table-2(Height of upper)	-	300	-
5.2.3 Table-2(Seat Region)	-	300	-
5.3.1.1 Table-2(Construction)	-	300	-
5.3.1.2 Table-2(Upper/Outsole Bond)	-	700	-
Table-2(Strength)	-	0	-
5.3.2.1 Table-2(General)	-	300	-
5.3.2.2 Table-2(Internal Length of toe cap)	-	300	-
5.3.2.3 Table-2(Impact Resistance -T- )	-	700	-
5.3.2.4 Table-2(Compression)	-	700	-
5.3.2.5 Table-2(Behaviour of toe cap)	-	500	-
5.3.3 Table-2(Leak Proofness)	-	500	-
5.3.4 Table-2(Specific Ergonomic)	-	1000	-
Table-2(Features)	-	0	-
Table-2(0.18)	-	26500	5.3.6 (Innocuousness)
5.4.1 Table-2(General)	-	300	-
5.4.2 Table-2(Thickness)	-	300	-
5 4 3 Table-2(Tear Strength)	-	500	-
5.4.4 Table-2(Tensile Properties)	-	500	-
5.4.5 Table-2(Flexing Resistance)	-	1000	-
5.4.6 Table-2(Water Vapour Permeability & Coefficient)	-	700	-
5 4.7 Table-2( )	-	500	-
5 4.8 Table-2(Hydrolysis)	-	3500	-
5.4 9 Table-2(Chrome VI)	-	750	-
5.5.1 Table-2(Tear Strength)	-	500	-
5.5.2 Table-2(Abrasion Resistance)	-	700	-
5.5.3 Table-2(Water Vapour Permeability & Coefficient)	-	700	-
5.5.4 Table-2(pH Value)	-	500	-
5.5.5 Table-2(Chrome VI)	-	750	-
5.6.1 Table-2(Tear Strength)	-	500	-
5.6.2 Table-2(pH Value)	-	500	-
5.6.3 Table-2(Chromium VI)	-	750	-
5.7.1 Table-3(Thickness)	-	300	-
5.7.2 Table-3(pH Value)	-	500	-
5.7.3 Table-3(Water Absorption &)	-	500	-
5.7.4.1 Table-3(Insole Abrasion)	-	400	-
5.7.4.2 Table-3(Abrasion)	-	700	-
5.7.5 Table-3(Chromium VI)	-	750	-
5.8.1 Table-2(Design)	-	900	Thickness, Cleat Height, Cleat Area
5.8.2 Table-2(Tear Strength)	-	500	-
5.8.3 Table-3(Abrasion Resistance)	-	700	-
5.8.4 Table-3(Flexing Resistance)	-	700	-
5.8.5 Table-3(Hydrolysis)	-	3500	-
5.8.6 Table-2(Interlayer BondStrength)	-	700	-
6.2.1 Table-I8(Penetration Resistance)	-	1000	-
6.2.2.1 Table-18(Electrical Properties)	-	0	-
Table-18(Conductive Footwear)	-	1000	-
6.2.2.2 Table-18(Antistatic Footwear)	-	1000	-
6.2.3.1 Table-18(Heat Insulated Comp)	-	700	-
6.2.3.2 Table-18(Cold Insulated)	-	700	-
6.2.4 Table-18(Energy Absorption of seat region)	-	2000	-
6.2.5 Table-18(Water Resistance)	-	500	-
6.2.7 Table-18(Ankle Protection)	-	0	-
6.2.8 Table-18(Cut Resistance)	-	2500	-
6.3 Table-18(Water Penetration & Absorption)	-	1000	-
6.4.1 Table-18(Resistance to Hot Contact)	-	700	-
6.4.2 Table-18(Resistance to Fuel oil)	-	700	-
Cl.4, Table1, Annex A ISO 20344 :2011(Classification and designs)	-	0	Clause Repeated
Cl. 5,Cl.5.1Table 2, Table 3(General)	-	0	Clause Repeated
Cl. 5.2, Cl.5.2.1, Figure 3,(General)	-	0	Clause Repeated
8(Information to be supplied)	-	0	Clause Repeated
Cl.8.1 IS 15298 Part 3:2018, ISO 20346 :2014(General)	-	0	Clause Repeated
8.2(Electrical properties)	-	0	Clause Repeated
8.2.1(Conductive footwear)	-	0	Clause Repeated
8.2.2(Antistatic footwear)	-	0	Clause Repeated
8.3(Insocks)	-	0	Clause Repeated
Cl.5.8.1.3(Cleat Height)	-	0	Clause Repeated
Cl.5.8.1.2(Cleated area)	-	0	Clause Repeated
Cl.5.8.1.1(Table 17 Thickness)	-	0	Clause Repeated
Table-3(Desorption)	-	0	Clause Repeated
6.2.7 Table-18(Ankle Protection)	-	0	Clause Repeated
6.2.8 Table-18(Cut Resistance)	-	0	Clause Repeated
Cl.4, Table1, Annex A ISO 20344 :2011(Classification and designs)	-	0	Clause Repeated
Cl. 5,Cl.5.1Table 2, Table 3(General)	-	0	Clause Repeated
Cl. 5.2, Cl.5.2.1, Figure 3,(General)	-	0	Clause Repeated
8(Information to be supplied)	-	0	Clause Repeated
Cl.8.1 IS 15298 Part 3:2018, ISO 20346 :2014(General)	-	0	Clause Repeated
8.2(Electrical properties)	-	0	Clause Repeated
8.2.1(Conductive footwear)	-	0	Clause Repeated
8.2.2(Antistatic footwear)	-	0	Clause Repeated
8.3(Insocks)	-	0	Clause Repeated
Cl.5.8.1.3(Cleat Height)	-	0	Clause Repeated
Cl.5.8.1.2(Cleated area)	-	0	Clause Repeated
Cl.5.8.1.1(Table 17 Thickness)	-	0	Clause Repeated
5.3.5.2 Table-2(Slip Resistance SRA)	-	0	Clause Repeated
5.3.5.3 Table-2(Slip Resistance SRB)	-	0	Clause Repeated
Cl.5.3.5.1, Cl.5.3.5.2,Cl.5.3.5.3 or 5.3.5.4 IS 15298 (Part1):2015,ISO 20344:2011,5.11(General)	-	2000	-
5.3.5.4 Table-2(Slip Resistance SRC)	-	0	Inclusive Cl. 5.3.5.1, 5.3.5.2, 5.3.5.3, 5.3.5.4
Cl. 6.2.6 Table 18(Metatarsal Protection)	-	2000	-

31 Dec, 2029

-
Included w.e.f. 03.10.2024 Exclusion: for all types of footwear except electrically insulated footwear, ankle protection footwear, Cl.5.3.6 innocuousness allergenic and carcinogenic disperse dyes

IS 15298 : Part 2 (2016)

Personal protective equipment: Part 2 safety footwear (Second Revision)

Safety Footwear

41475 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4,Table 1(Class I, IS 15298)	-	200	-
4,Table 1(Class II, IS 15298)	-	200	-
5.2,5.2.1, Fig 3(Design,General, IS 15298)	-	500	-
5.2.2, Fig 4(Height of Upper, ISO 20344 , 6.2)	-	300	-
5.2.3, Table 10 ,Design A(Seat Region)	-	300	-
5.3.1.1(Construction)	-	300	-
5.3.1.2(Upper/outer sole bond strength , ISO 20344 , 5.2)	-	700	-
5.3.2.1(General, EN 12568 OF 4.2.2.2)	-	300	-
5.3.2.2,Table 5(Internal length of toecaps , ISO 20344 , 5.3)	-	300	-
5.3.2.3,Table 6(Impact resistance of safety footwear,ISO 20344 , 5.4)	-	700	-
5.3.2.4 ,Table 6(Compression Resistance of safety footwear ,ISO20344 , 5.5)	-	700	-
5.3.2.5.1(Corrosion resistance of metallic toecaps ,ISO20344 , 5.6.2)	-	500	-
5.3.2.5.2(Non metallic toe caps ,EN 12568)	-	1000	-
5.3.3(Leak proofness ,ISO 20344 , 5.7)	-	500	-
5.3.4(Specific ergonomic feature ,ISO 20344 , 5.1)	-	1000	-
5.3.6(Innocuousness)	-	26500	-
5.4.1,Table 10(General)	-	300	-
5.4.2, Table 11(Thickness , ISO 20344 , 6.1 )	-	300	-
5.4.3, Table 12(Tear Strength, ISO 20344 , 6.3 )	-	500	-
5.4.4, Table 13(Tensile properties ,ISO 20344 , 6.4.1 )	-	500	-
5.4.5, Table 14(Flexing resistance ,ISO 20344,6.5)	-	1000	-
5.4.6(Water vapour permeability and coefficient,ISO 20344,6.6 & 6.8)	-	700	-
5.4.7(Ph Value ; ISO 20344,6.9)	-	500	-
5.4.8(Hydrolysis ; ISO 20344,6.10)	-	3500	-
5.4.9(Chromium VI content; ISO 17075)	-	750	-
5.5.1,Table 15(Tear Strength, ISO 20344 , 6.3)	-	500	-
5.5.2(Abrasion Resistance ;ISO 20344 , 6.12)	-	700	-
5.5.3(Water vapour permeability and coefficient,ISO 20344,6.6 & 6.8)	-	700	-
5.5.4(Ph Value ; ISO 20344,6.9)	-	500	-
5.5.5(Chromium VI content; ISO 17075)	-	750	-
5.6.1,Table 16(Tear Strength, ISO 20344 , 6.3)	-	500	-
5.6.2(Ph Value ; ISO 20344,6.9)	-	500	-
5.6.3(Chromium VI content; ISO 17075)	-	750	-
5.7.1;Table 3(Thickness ; ISO 20344,7.1)	-	300	-
5.7.2(Ph Value ; ISO 20344,6.9)	-	500	-
5.7.3(Water Absorption and desorption ISO 20344,7.2 )	-	500	-
5.7.4.1(Insole ; ISO 20344,7.3 )	-	400	-
5.7.4.2(Insocks ; ISO 20344, 6.12)	-	700	-
5.7.5(Chromium VI content; ISO 17075)	-	750	-
5.8.1(Design, IS 15298 Part 2 )	-	0	-
5.8.1.1, Table 17(Thickness ; ISO 20344, 8.1.2)	-	300	-
5.8.1.2(Cleated area ; ISO 20344 , Fig 38)	-	300	-
5.8.1.3, Table 17(Cleat height; ISO 20344, 8.1)	-	300	-
5.8.2(Tear Strength, ISO 20344 , 8.2)	-	500	-
5.8.3(Abrasion Resistance ;ISO 20344 , 8.3)	-	700	-
5.8.4(Flexing resistance ,ISO 20344,8.4)	-	700	-
5.8.5(Hydrolysis ; ISO 20344,8.5)	-	3500	-
5.8.6(Interlayer bond strength; ISO 20344, 5.2)	-	700	-
6.2.1.1.1(Metallic anti-penetration insert; ISO 20344, 5.8.2)	-	1000	-
6.2.1.1.2(Non-metallic anti-penetration insert; ISO 20344, 5.8.3)	-	1000	-
6.2.1.2(Consruction)	-	200	-
6.2.1.3(Dimension ; ISO 20344, 5.8.1)	-	300	-
6.2.1.4(Flex resistance of penetration -resistant insert ; ISO 20344,5.9)	-	2500	-
6.2.1.5.1(Corrosion resistance of penetration -resistant metallic insert - ISO 20344, 5.6.3 &5.6.1)	-	500	-
6.2.1.5.2(Penetration -resistant non-metallic insert ; EN 12568,6.4&7.4)	-	1000	-
6.2.2.1 (Conductive footwear ; ISO 20344,5.10 & 5.10.3.3)	-	1000	-
6.2.2.2(Antistatic footwear ; ISO 20344,5.10)	-	1000	-
6.2.3.1(Hear insulation of sole complex; ISO 20344,5.12 ;Annex B)	-	700	-
6.2.3.2(Cold insulation of sole complex; ISO 20344,5.13)	-	700	-
6.2.4(Energy absorption of seat region; ISO 20344,5.14)	-	2000	-
6.2.5(Water resistance ; 5.15.1 & 5.15.2)	-	500	-
6.2.6.1(Construction)	-	200	-
6.2.6.2 , Table 19(Impact resistance of metatarsal protective device,ISO 20344 , 5.16)	-	3000	-
6.2.8.1(Design)	-	0	-
6.2.8.2(Construction)	-	0	-
6.2.8.3,EN 388(Resistance to cutting ,EN 388)	-	2500	-
6.2.8.4(Penetration Resistance)	-	1000	-
6.3(Upper--Water penetration and absorption ; ISO 20344 , 5.13)	-	1000	-
6.4.1(Resistance to hot contact ; ISO 20344 , 8.7)	-	700	-
6.4.2(Resistance to fuel oil ; ISO 20344 , 8.6.1& 8.6.2 ; )	-	700	-
5.6(Tongue - IS 15298 Part 2 )	-	0	-
Cl.7, table 2,table 18,table 20, table21, EN 13832-1,EN 13832-3: 2006,6.2.2.3(Marking)	-	0	-
8(Information to be supplied)	-	0	-
Cl.8.1 IS 15298 Part 2:2016 + A1:2019 + A2:2019, ISO 20345 :2011(General)	-	0	-
8.2(Electrical Properties)	-	0	-
8.2.2(Antistatic footwear)	-	0	-
8.3(Insocks)	-	0	-
Cl.5.7.3(Water absorption and desorption)	-	0	-
Cl.5.7.2(PH value)	-	0	-
5.5.1(Tear strength)	-	0	-
5.5.2(Abrasion Resistance)	-	0	-
5.5.3(W.V.P & W.V.C)	-	0	-
5.7.1(Insole thickness)	-	0	-
5.7.4.2(Insock abrasion)	-	0	-
5.8.1.2(Cleated area)	-	0	-
5.8.4(Flexing resistance)	-	0	-
5.8.1.1(Thickness)	-	0	-
5.8.1.3(Cleat height)	-	0	-
4,Table 1(Class I, IS 15298)	-	0	Clause Repeated
4,Table 1(Class II, IS 15298)	-	0	Clause Repeated
5.2,5.2.1, Fig 3(Design,General, IS 15298)	-	0	Clause Repeated
5.2.2, Fig 4(Height of Upper, ISO 20344 , 6.2)	-	0	Clause Repeated
5.2.3, Table 10 ,Design A(Seat Region)	-	0	Clause Repeated
5.3.1.1(Construction)	-	0	Clause Repeated
5.3.1.2(Upper/outer sole bond strength , ISO 20344 , 5.2)	-	0	Clause Repeated
5.3.2.1(General, EN 12568 OF 4.2.2.2)	-	0	Clause Repeated
5.3.2.2,Table 5(Internal length of toecaps , ISO 20344 , 5.3)	-	0	Clause Repeated
5.3.2.3,Table 6(Impact resistance of safety footwear,ISO 20344 , 5.4)	-	0	Clause Repeated
5.3.2.4 ,Table 6(Compression Resistance of safety footwear ,ISO20344 , 5.5)	-	0	Clause Repeated
5.3.2.5.1(Corrosion resistance of metallic toecaps ,ISO20344 , 5.6.2)	-	0	Clause Repeated
5.3.2.5.2(Non metallic toe caps ,EN 12568)	-	0	Clause Repeated
5.3.3(Leak proofness ,ISO 20344 , 5.7)	-	0	Clause Repeated
5.3.4(Specific ergonomic feature ,ISO 20344 , 5.1)	-	0	Clause Repeated
5.3.6(Innocuousness)	-	0	Clause Repeated
5.4.1,Table 10(General)	-	0	Clause Repeated
5.4.2, Table 11(Thickness , ISO 20344 , 6.1 )	-	0	Clause Repeated
5.4.3, Table 12(Tear Strength, ISO 20344 , 6.3 )	-	0	Clause Repeated
5.4.4, Table 13(Tensile properties ,ISO 20344 , 6.4.1 )	-	0	Clause Repeated
5.4.5, Table 14(Flexing resistance ,ISO 20344,6.5)	-	0	Clause Repeated
5.4.6(Water vapour permeability and coefficient,ISO 20344,6.6 & 6.8)	-	0	Clause Repeated
5.4.7(Ph Value ; ISO 20344,6.9)	-	0	Clause Repeated
5.4.8(Hydrolysis ; ISO 20344,6.10)	-	0	Clause Repeated
5.4.9(Chromium VI content; ISO 17075)	-	0	Clause Repeated
5.5.1,Table 15(Tear Strength, ISO 20344 , 6.3)	-	0	Clause Repeated
5.5.2(Abrasion Resistance ;ISO 20344 , 6.12)	-	0	Clause Repeated
5.5.3(Water vapour permeability and coefficient,ISO 20344,6.6 & 6.8)	-	0	Clause Repeated
5.5.4(Ph Value ; ISO 20344,6.9)	-	0	Clause Repeated
5.5.5(Chromium VI content; ISO 17075)	-	0	Clause Repeated
5.6.1,Table 16(Tear Strength, ISO 20344 , 6.3)	-	0	Clause Repeated
5.6.2(Ph Value ; ISO 20344,6.9)	-	0	Clause Repeated
5.6.3(Chromium VI content; ISO 17075)	-	0	Clause Repeated
5.7.1;Table 3(Thickness ; ISO 20344,7.1)	-	0	Clause Repeated
5.7.2(Ph Value ; ISO 20344,6.9)	-	0	Clause Repeated
5.7.3(Water Absorption and desorption ISO 20344,7.2 )	-	0	Clause Repeated
5.7.4.1(Insole ; ISO 20344,7.3 )	-	0	Clause Repeated
5.7.4.2(Insocks ; ISO 20344, 6.12)	-	0	Clause Repeated
5.7.5(Chromium VI content; ISO 17075)	-	0	Clause Repeated
5.8.1(Design, IS 15298 Part 2 )	-	0	Clause Repeated
5.8.1.1, Table 17(Thickness ; ISO 20344, 8.1.2)	-	0	Clause Repeated
5.8.1.2(Cleated area ; ISO 20344 , Fig 38)	-	0	Clause Repeated
5.8.1.3, Table 17(Cleat height; ISO 20344, 8.1)	-	0	Clause Repeated
5.8.2(Tear Strength, ISO 20344 , 8.2)	-	0	Clause Repeated
5.8.3(Abrasion Resistance ;ISO 20344 , 8.3)	-	0	Clause Repeated
5.8.4(Flexing resistance ,ISO 20344,8.4)	-	0	Clause Repeated
5.8.5(Hydrolysis ; ISO 20344,8.5)	-	0	Clause Repeated
5.8.6(Interlayer bond strength; ISO 20344, 5.2)	-	0	Clause Repeated
6.2.1.1.1(Metallic anti-penetration insert; ISO 20344, 5.8.2)	-	0	Clause Repeated
6.2.1.1.2(Non-metallic anti-penetration insert; ISO 20344, 5.8.3)	-	0	Clause Repeated
6.2.1.2(Consruction)	-	0	Clause Repeated
6.2.1.3(Dimension ; ISO 20344, 5.8.1)	-	0	Clause Repeated
6.2.1.4(Flex resistance of penetration -resistant insert ; ISO 20344,5.9)	-	0	Clause Repeated
6.2.1.5.1(Corrosion resistance of penetration -resistant metallic insert - ISO 20344, 5.6.3 &5.6.1)	-	0	Clause Repeated
6.2.1.5.2(Penetration -resistant non-metallic insert ; EN 12568,6.4&7.4)	-	0	Clause Repeated
6.2.2.1 (Conductive footwear ; ISO 20344,5.10 & 5.10.3.3)	-	0	Clause Repeated
6.2.2.2(Antistatic footwear ; ISO 20344,5.10)	-	0	Clause Repeated
6.2.3.1(Hear insulation of sole complex; ISO 20344,5.12 ;Annex B)	-	0	Clause Repeated
6.2.3.2(Cold insulation of sole complex; ISO 20344,5.13)	-	0	Clause Repeated
6.2.4(Energy absorption of seat region; ISO 20344,5.14)	-	0	Clause Repeated
6.2.5(Water resistance ; 5.15.1 & 5.15.2)	-	0	Clause Repeated
6.2.6.1(Construction)	-	0	Clause Repeated
6.2.6.2 , Table 19(Impact resistance of metatarsal protective device,ISO 20344 , 5.16)	-	0	Clause Repeated
6.2.8.1(Design)	-	0	Clause Repeated
6.2.8.2(Construction)	-	0	Clause Repeated
6.2.8.3,EN 388(Resistance to cutting ,EN 388)	-	0	Clause Repeated
6.2.8.4(Penetration Resistance)	-	0	Clause Repeated
6.3(Upper--Water penetration and absorption ; ISO 20344 , 5.13)	-	0	Clause Repeated
6.4.1(Resistance to hot contact ; ISO 20344 , 8.7)	-	0	Clause Repeated
6.4.2(Resistance to fuel oil ; ISO 20344 , 8.6.1& 8.6.2 ; )	-	0	Clause Repeated
5.6(Tongue - IS 15298 Part 2 )	-	0	Clause Repeated
Cl.7, table 2,table 18,table 20, table21, EN 13832-1,EN 13832-3: 2006,6.2.2.3(Marking)	-	0	Clause Repeated
8(Information to be supplied)	-	0	Clause Repeated
Cl.8.1 IS 15298 Part 2:2016 + A1:2019 + A2:2019, ISO 20345 :2011(General)	-	0	Clause Repeated
8.2(Electrical Properties)	-	0	Clause Repeated
8.2.2(Antistatic footwear)	-	0	Clause Repeated
8.3(Insocks)	-	0	Clause Repeated
Cl.5.7.3(Water absorption and desorption)	-	0	Clause Repeated
Cl.5.7.2(PH value)	-	0	Clause Repeated
5.5.1(Tear strength)	-	0	Clause Repeated
5.5.2(Abrasion Resistance)	-	0	Clause Repeated
5.5.3(W.V.P & W.V.C)	-	0	Clause Repeated
5.7.1(Insole thickness)	-	0	Clause Repeated
5.7.4.2(Insock abrasion)	-	0	Clause Repeated
5.8.1.2(Cleated area)	-	0	Clause Repeated
5.8.4(Flexing resistance)	-	0	Clause Repeated
5.8.1.1(Thickness)	-	0	Clause Repeated
5.8.1.3(Cleat height)	-	0	Clause Repeated
5.3.5.2,Table 7(Slip resistance on ceramic tile floor with sodium lauryl sulphate (NaLS) solution)	-	2000	-
5.3.5.3,Table 8(Slip resistance on steel floor with glycerin)	-	2000	-
5.3.5.4(Slip resistance on ceramic tile floor with NaLS and on steel floor with glycerin)	-	2000	-
Cl.5.3.5.1, Cl.5.3.5.2,Cl.5.3.5.3 or 5.3.5.4 IS 15298 (Part1):2015,ISO 20344:2011,5.11(General)	-	2000	-

31 Dec, 2029

-
Included w.e.f. 03.10.2024 Exclusion: for all types of footwear except electrically insulated footwear, ankle protection footwear, Cl.5.3.6 innocuousness allergenic and carcinogenic disperse dyes

IS 4151 (1993.0)

Protective helmets for motorcycle riders - Specification

All

20000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Shell)	-	200	NA
4.5(Metal Parts)	-	800	NA
4.6(Visor)	-	550	Refer to IS 9973
6.1(General)	-	400	NA
6.2(Shell)	-	300	NA
6.3(Protactive Padding)	-	300	NA
6.4(Retention System)	-	700	NA
5.1(Size)	-	300	NA
6.5(Pheripheral Vision)	-	800	NA
6.6(Visor)	-	5500	Refer to IS 9973
6.8(Workmanship and Finish)	-	500	NA
8.0(Mass)	-	300	NA
9.1(Impact Absorption)	-	5200	NA
9.2(Resistance to Penetration)	-	1000	NA
9.3(Rigidity test)	-	900	NA
9.4(Dynamic test of Retention System)	-	900	NA
9.5(Audibility test)	-	900	NA
9.6(Retention test)	-	800	NA
9.7(Opening Angle (Visor) test)	-	700	NA
9.8(Flexibility of Peak)	-	600	NA

31 Dec, 2029

-
-

IS 9873 : Part 9 (2017)

Safety of Toys Part 9 Certain Phthalates Esters in Toys and Children's Products

All

4000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.0(Vinyl in toys or childcare articles - a) Bis-(2-ethlyhexyl) Phthalates (DEHP), b) Di-Butyl phthalate (DBP), c) Benzyl butyl Phthalate (BBP) - IS 9873 Part 6)	-	4000	per material, Additional charges for different material applicable
3.0(Vinyl in any part of the toy or childcare article that can be placed in mouth of a child under 4 years of age - a) Di-iso-Nonyl Phthalate (DINP), b) Di-iso-Decyl Phthalate (DIDP), c) Di-n-Octyl Phthalate (DNOP) - IS 9873 Part 6)	-	4000	per material, Additional charges for different material applicable
3.0(Vinyl in toys or childcare articles - a) Bis-(2-ethlyhexyl) Phthalates (DEHP), b) Di-Butyl phthalate (DBP), c) Benzyl butyl Phthalate (BBP) - IS 9873 Part 6)	-	4000	per material, Additional charges for different material applicable
3.0(Vinyl in any part of the toy or childcare article that can be placed in mouth of a child under 4 years of age - a) Di-iso-Nonyl Phthalate (DINP), b) Di-iso-Decyl Phthalate (DIDP), c) Di-n-Octyl Phthalate (DNOP) - IS 9873 Part 6)	-	4000	per material, Additional charges for different material applicable
3.0(Vinyl in toys or childcare articles - a) Bis-(2-ethlyhexyl) Phthalates (DEHP), b) Di-Butyl phthalate (DBP), c) Benzyl butyl Phthalate (BBP) - IS 9873 Part 6)	-	4000	per material, Additional charges for different material applicable
3.0(Vinyl in any part of the toy or childcare article that can be placed in mouth of a child under 4 years of age - a) Di-iso-Nonyl Phthalate (DINP), b) Di-iso-Decyl Phthalate (DIDP), c) Di-n-Octyl Phthalate (DNOP) - IS 9873 Part 6)	-	4000	per material, Additional charges for different material applicable
3.0(Vinyl in toys or childcare articles - a) Bis-(2-ethlyhexyl) Phthalates (DEHP), b) Di-Butyl phthalate (DBP), c) Benzyl butyl Phthalate (BBP) - IS 9873 Part 6)	-	4000	per material, Additional charges for different material applicable
3.0(Vinyl in any part of the toy or childcare article that can be placed in mouth of a child under 4 years of age - a) Di-iso-Nonyl Phthalate (DINP), b) Di-iso-Decyl Phthalate (DIDP), c) Di-n-Octyl Phthalate (DNOP) - IS 9873 Part 6)	-	4000	per material, Additional charges for different material applicable

31 Dec, 2029

-
Included w.e.f. 31-12-2020

IS 9973 (1981)

Specification for visor for scooter helmets

All

7000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(Impact resistance)	-	500	NA
5.2(Penetration resistance)	-	500	NA
5.3(Flammability)	-	700	NA
5.4.1(Distortion)	-	200	NA
5.4.2(Spherical&Cylindral error)	-	1000	NA
5.4.3(Prismatic Error)	-	900	NA
5.4.4(Diffuse transmittance)	-	1000	NA
5.4.5(Light transmission)	-	1000	NA
5.5(Field of Vision)	-	800	NA
7.0(Mass)	-	400	NA

31 Dec, 2029

-
-

IS 9873 : Part 2 (2017)

Safety of toys: Part 2 flammability (Third Revision)

All

1500 View breakup
Rs. 1,500/- + GST (10% discount for BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2.2-5.2(Toys to be worn on the head-Beards, moustaches, wigs, etc. made from hair, pile, or material that behaves in a similar manner to hair (e.g. free-hanging ribbons, paper, cloth strands, or other flowing elements), which protrude 50 mm or more from the surface of the toy-Duration of the flame after the removal of the test flame)	-	1500	10% discount to BIS
4.2.2(a)-5.2(Toys to be worn on the head-Test relating to Beards, moustaches, wigs, etc. made from hair, pile, or material that behaves in a similar manner to hair (e.g. free-hanging ribbons, paper, cloth strands, or other flowing elements), which protrude 50 mm or more from the surface of the toy- if ignition occurs, the maximum burnt length of hair, pile, or material that behaves in a similar manner when the initial length was 150 mm or more)	-	1500	10% discount to BIS
4.2.2(b)-5.2(Toys to be worn on the head-Test relating to Beards, moustaches, wigs, etc. made from hair, pile, or material that behaves in a similar manner to hair (e.g. free-hanging ribbons, paper, cloth strands, or other flowing elements), which protrude 50 mm or more from the surface of the toy- if ignition occurs, the maximum burnt length of hair, pile, or material that behaves in a similar manner when the initial length was less than 150 mm)	-	1500	10% discount to BIS
4.2.3-5.3(Toys to be worn on the head-Beards, moustaches, wigs, etc. made from hair, pile, or material that behaves in a similar manner to hair (e.g. free-hanging ribbons, paper, cloth strands, or other flowing elements), which protrude less than 50 mm and more than 5 mm from the surface of the toy-Duration of the flame after the removal of the test flame)	-	1500	10% discount to BIS
4.2.4-5.3(Toys to be worn on the head-Full or partial moulded head masks-Duration of the flame after the removal of the test flame)	-	1500	10% discount to BIS
4.2.5-5.4(Toys to be worn on the head-Flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks)-Test relating to flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks), toy disguise costumes and toys intended to be entered or worn by a child )	-	1500	10% discount to BIS
4.3-5.4(Toys to be worn on the head-Toy disguise costumes and toys intended to be worn by a child in play-rate of spread of flame)	-	1500	10% discount to BIS
4.3(Toys to be worn on the head-Toy disguise costumes and toys intended to be worn by a child in play)	-	500	10% discount to BIS
4.4-5.4(Toys intended to be entered by a child-rate of spread of flame)	-	1500	10% discount to BIS
4.5-5.5(Soft-filled toys-rate of spread of flame )	-	1500	10% discount to BIS
4.4(Toys intended to be entered by a child-rate of spread of flame-Test relating to flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks), toy disguise costumes and toys intended to be entered or worn by a child )	-	500	10% discount to BIS

31 Dec, 2029

-
Included w.e.f. 31-12-2020

IS 4151 (2015)

Protective helmets for motorcycle riders - Specification

All

31500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Shell)	-	200	NA
4.5(Metal Parts)	-	800	NA
4.6(Visor)	-	7000	Refer to IS 9973
6.1(General)	-	400	NA
6.2(Shell)	-	300	NA
6.3(Protactive Padding)	-	300	NA
6.4(Retention System)	-	700	NA
6.7(Peripheral Vision)	-	800	NA
6.8(Workmanship and Finish)	-	500	NA
7.2(Impact Absorption Test)	-	8500	NA
7.3(Rigidity Test)	-	900	NA
7.4(Projections and Surface Friction Test)	-	3000	NA
7.5(Dynamic Test of Retention System)	-	800	NA
7.6(Audibility Test)	-	900	NA
7.7(Retention Test of Helmet)	-	1000	NA
7.8(Micro-Slip Test of the Chin Strap)	-	1200	NA
7.9(Test for Resistance to Abrasion of the Chin Strap )	-	1800	NA
7.10.1(Inadvertent Release by Pressure)	-	200	NA
7.10.2(Ease of Release)	-	400	NA
7.10.3(Durability of Quick Release Mechanism)	-	1800	NA
4.1(Shell)	-	200	NA
4.5(Metal Parts)	-	800	NA
4.6(Visor)	-	7000	Refer to IS 9973
6.1(General)	-	400	NA
6.2(Shell)	-	300	NA
6.3(Protactive Padding)	-	300	NA
6.4(Retention System)	-	700	NA
6.7(Peripheral Vision)	-	800	NA
6.8(Workmanship and Finish)	-	500	NA
7.0(Tests for Helmets)	-	20500	NA
7.2(Impact Absorption Test)	-	8500	NA
7.3(Rigidity Test)	-	900	NA
7.4(Projections and Surface Friction Test)	-	3000	NA
7.5(Dynamic Test of Retention System)	-	800	NA
7.6(Audibility Test)	-	900	NA
7.7(Retention Test of Helmet)	-	1000	NA
7.8(Micro-Slip Test of the Chin Strap)	-	1200	NA
7.9(Test for Resistance to Abrasion of the Chin Strap )	-	1800	NA
7.10.1(Inadvertent Release by Pressure)	-	200	NA
7.10.2(Ease of Release)	-	400	NA
7.10.3(Durability of Quick Release Mechanism)	-	1800	NA

31 Dec, 2029

-
REVISED VERSION of IS 4151:2015 Included w.e.f. 02.07.2019.

Bureau of Indian Standards

The National Standards Body of India

Testtex India Laboratories Private Limited, Noida

C - 57, Sector - 65, Noida, Gautam Buddha Nagar, Uttar Pradesh, 201301

9821318289 labsindianoida@testtex.com

Scope List