BIS - LIMS (Laboratory Information Management System)

ALPHA TEST HOUSE SERVICES LLP (Unit-1)

PLOT NO. 124, INDUSTRIAL AREA, PHASE - 9, Mohali, S.A.S Nagar, Punjab, 160062

8288094215 alphatesthousellp@gmail.com

Scope List

Reset

29 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

IS/IEC 61730 : PART 2 (2004)

Photovoltaic (PV) Module Safety Qualification Part 2 Requirements for Testing

all

700000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
10.1(Visual Inspection (MST 01))	-	700000	-
10.2(Accessibility test (MST 11))	-	700000	-
10.3(Cut susceptibility test (MST 12))	-	700000	-
10.4(Ground Continuity Test (MST 13))	-	700000	-
10.5(Impulse voltage test (MST 14))	-	700000	-
10.6(Dielectric withstand test (MST 16))	-	700000	-
10.7(Temperature test (MST 21))	-	700000	-
10.8(Fire test (MST 23))	-	700000	-
10.9(Reverse Current overload test (MST 26))	-	700000	-
10.10(Module breakage test (MST 32))	-	700000	-
11.1(Partial discharge-test (MST 15))	-	700000	-
11.2(Conduit Bending test (MST 33))	-	700000	-
11.3(Terminal box knockout tests (MST 44))	-	700000	-
Cl.5, Table 7(Thermal cycling (T200) (MST 51))	-	700000	-
Cl.5, Table 7(Thermal cycling (T50) (MST 51))	-	700000	-
Cl.5, Table 7(Humidity freeze (10HF) (MST 52))	-	700000	-
Cl.5, Table 7(Damp heat (DH1000) (MST 53))	-	700000	-
Cl.5, Table 7(UV resistance (MST 54))	-	700000	-
Cl.5, Table 7(Wet leakage current test (MST 17))	-	700000	-
Cl.5, Table 7(Robustness of termination test (MST 42))	-	700000	-
Cl.5, Table 7(Hot spot test (MST 22))	-	700000	-
Cl.5, Table 7(Mechanical load test (MST 34))	-	700000	-
10.33 IS/IEC 61730-2(Dry heat conditioning MST 56)	-	700000	-
10.32 IS/IEC 61730-2(Cold conditioning MST 55)	-	700000	-
10.31 IS/IEC 61730-2(UV test MST 54)	-	700000	-
10.30 IS/IEC 61730-2(Damp heat test MST 53)	-	700000	-
10.29 IS/IEC 61730-2(Humidity-freeze test MST 52)	-	700000	-
10.28 IS/IEC 61730-2(Thermal cycling test MST 51)	-	700000	-
10.27 IS/IEC 61730-2(Robutness of terminations test MST 42)	-	700000	-
10.26 IS/IEC 61730-2(Materials creep test MST 37)	-	700000	-
10.25 IS/IEC 61730-2(Lap shear strength test MST 36)	-	700000	-
10.24 IS/IEC 61730-2(Peel test MST 35)	-	700000	-
10.23 IS/IEC 61730-2(Static Mechanical load test MST 34)	-	700000	-
10.22 IS/IEC 61730-2(Screw connections test MST 33)	-	700000	-
10.21 IS/IEC 61730-2(Module breakage test MST 32)	-	700000	-
10.20 IS/IEC 61730-2(Reverse current overload test MST 25)	-	700000	-
10.19 IS/IEC 61730-2(Bypass diode thermal test MST 25)	-	700000	-
10.18 IS/IEC 61730-2(Ignitability test MST 24)	-	700000	-
10.17 IS/IEC 61730-2(Fire test MST 23)	-	700000	-
10.16 IS/IEC 61730-2(Hot-spot endurance test MST 22)	-	700000	-
10.15 IS/IEC 61730-2(Temperature test MST 21)	-	700000	-
10.14 IS/IEC 61730-2(Wet leakage current test MST 17)	-	700000	-
10.13 IS/IEC 61730-2(Insulation test MST 16)	-	700000	-
10.12 IS/IEC 61730-2(Impulse voltage test MST 14)	-	700000	-
10.11 IS/IEC 61730-2(Continuity test of equipotential bonding MST 13)	-	700000	-
10.10 IS/IEC 61730-2(Cut susceptibility test MST 12)	-	700000	-
10.9 IS/IEC 61730-2(Accessibility test MST 11)	-	700000	-
10.8 IS/IEC 61730-2(Bypass diode functionality test MST 07)	-	700000	-
10.7 IS/IEC 61730-2(Sharp edge test MST 06)	-	700000	-
10.6 IS/IEC 61730-2(Durability of marking MST 05)	-	700000	-
10.5 IS/IEC 61730-2(Insulation thickness test MST 04)	-	700000	-
10.4 IS/IEC 61730-2(Maximum power determination MST 03)	-	700000	-
10.3 IS/IEC 61730-2(Performance at STC MST 02)	-	700000	-
10.2 IS/IEC 61730-2(Visual inspection MST01)	-	700000	-

25 Apr, 2028

-
Included w.e.f 20.06.2025

IS/IEC 61730 : PART 1 (2004)

Photovoltaic (PV) Module Safety Qualification Part 1 Requirements for Construction

all

200000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(Application classes)	-	200000	-
4(Construction requirements)	-	200000	-
5(Polymeric materials)	-	200000	-
6(Internal wiring and current-carrying parts)	-	200000	-
7(Connections)	-	200000	-
8(Bonding and grounding)	-	200000	-
9(Creepage and clearance distances)	-	200000	-
10(Field wiring compartments with covers)	-	200000	-
11(Marking)	-	200000	-
12()	-	200000	-

25 Apr, 2028

-
Included w.e.f 20.06.2025

IS 2095 : Part 3 (2022)

Gypsum Plaster Boards - Specification Part 3 Reinforced Gypsum Plaster Boards Tiles Cornices and Mouldings Third Revision of IS 2095 Part 3

All

44300 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
(Clause 4.1)("CaS04 . 2H2 O, Min")	-	44300	-
Clause 4.1 (ii))(Free water, percent)	-	44300	-
Clause 4.1 ( iii)(" pH a) Natural (mineral) gypsum b) By-product gypsum")	-	44300	-
Clause 4.1 ( iv)("SiO2 , Max")	-	44300	-
Clause 4.1 ( v)(Chloride content, Max)	-	44300	-
Clause 6.1.1("Dimensions of Gypsum Plaster Thickness, Length, Width (mm) ")	-	44300	-
Clause 6.1.2.1(Tolerance on straightness of edge)	-	44300	-
Clause 6.1.2.2(Tolerance on squarencess of edge)	-	44300	-
Clause 6.3(Density kg/m3)	-	44300	-
Clause 6.4.1(Fibre Reinforced Gypsum Plaster Board)	-	44300	-
Clause 6.4.2(Glass Reinforced Gypsum (GRG) Plaster Board)	-	44300	-
Clause 6.5(Impact Strength N-mm/mm2)	-	44300	-
Clause 6.6(Water Absorption)	-	44300	-
Clause 6.7(Jolting Test)	-	44300	-
Clause 9(MARKING)	-	44300	-

25 Apr, 2028

-
Included w.e.f 19.06.2025

IS 2095 : Part 2 (2022)

Gypsum plaster boards - specification: Part 2 Coated laminated gypsum plaster boards Third Revision of IS 2095 Part 2

All

42000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 4.1 ( i)("CaS04 . 2H2 O, Min")	-	42000	-
Clause 4.1 (ii))(Free water, percent)	-	42000	-
Clause 4.1 ( iii)(" pH a) Natural (mineral) gypsum b) By-product gypsum")	-	42000	-
Clause 4.1 ( iv)("SiO2 , Max")	-	42000	-
Clause 4.1 ( v)(Chloride content, Max)	-	42000	-
(Clause 6.1.1)(Dimensions - Width,Length, Thickness (mm))	-	42000	-
(Clause 6.1.2)(Tolerance on Shape)	-	42000	-
(Clause 6.2)(Density)	-	42000	-
(Clause 6.3)(" Flexural Breaking Load ")	-	42000	-
(Clause 6.5)("Finish ")	-	42000	-
(Clauses 7.1.2 )(Sampling of Gypsum Plaster Board)	-	42000	-

25 Apr, 2028

-
Included w.e.f 19.06.2025 Exclusion: (Clause 6.4) (Fire Resistance)

IS 2095 : Part 1 (2023)

Gypsum Plaster Boards Specification Part 1 Plain Gypsum Plaster Boards

all

42500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause. 5.0(CaSO4.2H2O)	-	42500	-
Clause. 5.0(Free water (Natural / By -product))	-	42500	-
Clause. 5.0(pHvalue (Natural / By -product))	-	42500	-
Clause. 5.0(SiO2)	-	42500	-
Clause. 5.0(Chloride content)	-	42500	-
Clause. 6.0(Manufacturing)	-	42500	-
Clause. 7.0(Dimensions)	-	42500	-
Clause. 7.0(Tolerances)	-	42500	-
Clause. 7.0(Density)	-	42500	-
Clause. 7.0(Flexural Breaking Load)	-	42500	-
Clause. 7.0(Impact Resistance)	-	42500	-
Clause. 7.0(Surface Hardness)	-	42500	-
Clause. 7.0(Loading Capability)	-	42500	-
Clause. 7.0(Water Absorption)	-	42500	-
Clause. 7.0(Finish)	-	42500	-
Cl-5.3(Paper Liner)	-	42500	-
Clause 7.1(Dimensions)	-	42500	-
(Clause 7.2)(Density)	-	42500	-
(Clause 7.3)(Flexural Load)	-	42500	-
(Clause 7.4)(Impact Resistance)	-	42500	-
(Clause 7.5)(Surface Hardness)	-	42500	-
(Clause 7.6)(Loading Capability)	-	42500	-
(Clause 7.7)(Water Absorption)	-	42500	-

25 Apr, 2028

-
Included w.e.f 19.06.2025 Exclusion: (Clause 7.8) (Fire Resistance)

IS/IEC 61730 : PART 1 (2016)

Photovoltaic (PV) Module Safety Qualification Part 1 Requirements for Construction ( First Revision )

All

800000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.0(Application Classes)	-	800000	-
4.0(Construction Requirements)	-	800000	-
5.0(Polymeric Materials)	-	800000	-
6.0(Internal Wiring and Current Carrying Parts)	-	800000	-
7.0(Connections)	-	800000	-
8.0(Bonding and Grounding)	-	800000	-
11.0(Marking)	-	800000	-
12.0(Requirements of Supplied documents)	-	800000	-
5.6.4 IS/IEC 61730-1( Distance through Insulation)	-	800000	-
5.6.3 IS/IEC 61730-1(Insulation Coordination)	-	800000	-
5.6.2 IS/IEC 61730-1( Protection Agianst accessibility to hazardeous live parts)	-	800000	-
5.6, 5.6.1 IS/IEC 61730-1( Protection Agianst Electric Shock)	-	800000	-
5.5.4 IS/IEC 61730-1(Adhesives)	-	800000	-
5.5.3.2 IS/IEC 61730-1( Current Carrying Parts)	-	800000	-
5.5.3, 5.5.3.1 IS/IEC 61730-1(Metallic materials)	-	800000	-
5.5.2.4 IS/IEC 61730-1(Polymeric Meterial used for Mechanical functions )	-	800000	-
5.5.2.3.5 IS/IEC 61730-1(Polymeric Insulating Parts supporting live Parts)	-	800000	-
5.5.2.3.4 IS/IEC 61730-1( Polymeric Insulating materials used as external Parts)	-	800000	-
5.5.2.3.3 IS/IEC 61730-1( Endurance to thermal stress-RTE (RTI) or TI )	-	800000	-
5.5.2.3.2 IS/IEC 61730-1( Endurance to Electrical Stress)	-	800000	-
5.5.2 IS/IEC 61730-1( Polymeric Materials)	-	800000	-
5.5, 5.5.1 IS/IEC 61730-1( Materials)	-	800000	-
5.4.7 IS/IEC 61730-1( Other Connections)	-	800000	-
5.4.6 IS/IEC 61730-1( Connections by adhesives)	-	800000	-
5.4.5 IS/IEC 61730-1( Form/Press/Tight/Fit)	-	800000	-
5.4.4 IS/IEC 61730-1( Thread Cutting Screws)	-	800000	-
5.4.3 IS/IEC 61730-1( Rivets)	-	800000	-
5.4.2 IS/IEC 61730-1( Screw Connctions)	-	800000	-
5.4, 5.4.1 IS/IEC 61730-1( Mechanical and Electromechanical connections)	-	800000	-
5.3.10 IS/IEC 61730-1( Bypass Diodes)	-	800000	-
5.3.9 IS/IEC 61730-1( Encapsulants)	-	800000	-
5.3.8 IS/IEC 61730-1( Electrical Connections)	-	800000	-
5.3.7 IS/IEC 61730-1( Insulation Barrier)	-	800000	-
5.3.6 IS/IEC 61730-1( Front sheet and back Sheet)	-	800000	-
5.3.5 IS/IEC 61730-1( Junction Box for PV modules)	-	800000	-
5.3.4 IS/IEC 61730-1( Connectors)	-	800000	-
5.3.3 IS/IEC 61730-1( External Wirings and cables)	-	800000	-
5.3.2 IS/IEC 61730-1( Internal Wiring)	-	800000	-
5.3, 5.3.1 IS/IEC 61730-1( Electrical Components and Insualtion)	-	800000	-
5.2 IS/IEC 61730-1( Marking and Documentation)	-	800000	-
5, 5.1 IS/IEC 61730-1( Requirements for design and Construction)	-	800000	-
4 IS/IEC 61730-1( Classification, Application and Inteded Use)	-	800000	-
5.6.4 IS/IEC 61730-1( Distance through Insulation)	-	800000	-
5.6.3 IS/IEC 61730-1(Insulation Coordination)	-	800000	-
5.6.2 IS/IEC 61730-1( Protection Agianst accessibility to hazardeous live parts)	-	800000	-
5.6, 5.6.1 IS/IEC 61730-1( Protection Agianst Electric Shock)	-	800000	-
5.5.4 IS/IEC 61730-1(Adhesives)	-	800000	-
5.5.3.2 IS/IEC 61730-1( Current Carrying Parts)	-	800000	-
5.5.3, 5.5.3.1 IS/IEC 61730-1(Metallic materials)	-	800000	-
5.5.2.4 IS/IEC 61730-1(Polymeric Meterial used for Mechanical functions )	-	800000	-
5.5.2.3.5 IS/IEC 61730-1(Polymeric Insulating Parts supporting live Parts)	-	800000	-
5.5.2.3.4 IS/IEC 61730-1( Polymeric Insulating materials used as external Parts)	-	800000	-
5.5.2.3.3 IS/IEC 61730-1( Endurance to thermal stress-RTE (RTI) or TI )	-	800000	-
5.5.2.3.2 IS/IEC 61730-1( Endurance to Electrical Stress)	-	800000	-
5.5.2 IS/IEC 61730-1( Polymeric Materials)	-	800000	-
5.5, 5.5.1 IS/IEC 61730-1( Materials)	-	800000	-
5.4.7 IS/IEC 61730-1( Other Connections)	-	800000	-
5.4.6 IS/IEC 61730-1( Connections by adhesives)	-	800000	-
5.4.5 IS/IEC 61730-1( Form/Press/Tight/Fit)	-	800000	-
5.4.4 IS/IEC 61730-1( Thread Cutting Screws)	-	800000	-
5.4.3 IS/IEC 61730-1( Rivets)	-	800000	-
5.4.2 IS/IEC 61730-1( Screw Connctions)	-	800000	-
5.4, 5.4.1 IS/IEC 61730-1( Mechanical and Electromechanical connections)	-	800000	-
5.3.10 IS/IEC 61730-1( Bypass Diodes)	-	800000	-
5.3.9 IS/IEC 61730-1( Encapsulants)	-	800000	-
5.3.8 IS/IEC 61730-1( Electrical Connections)	-	800000	-
5.3.7 IS/IEC 61730-1( Insulation Barrier)	-	800000	-
5.3.6 IS/IEC 61730-1( Front sheet and back Sheet)	-	800000	-
5.3.5 IS/IEC 61730-1( Junction Box for PV modules)	-	800000	-
5.3.4 IS/IEC 61730-1( Connectors)	-	800000	-
5.3.3 IS/IEC 61730-1( External Wirings and cables)	-	800000	-
5.3.2 IS/IEC 61730-1( Internal Wiring)	-	800000	-
5.3, 5.3.1 IS/IEC 61730-1( Electrical Components and Insualtion)	-	800000	-
5.2 IS/IEC 61730-1( Marking and Documentation)	-	800000	-
5, 5.1 IS/IEC 61730-1( Requirements for design and Construction)	-	800000	-
4 IS/IEC 61730-1( Classification, Application and Inteded Use)	-	800000	-
4(Classification, applications and intended use)	-	800000	-
5.2(Marking and documentation)	-	800000	-
5.3(Electrical components and insulation)	-	800000	-
5.3.2(Internal wiring)	-	800000	-
5.3.4(Connectors)	-	800000	-
5.4(Mechanical and electromechanical connections)	-	800000	-
5.5(Materials)	-	800000	-
5.5.2, 5.3.7(Polymeric materials)	-	800000	-
5.6(Protection against electric shock)	-	800000	-
5.6.3.4(Clearances and creepage distances)	-	800000	-
9.0(Creepage and clearance distances)	-	800000	-
10.0(Field Wiring Compartments with covers)	-	800000	-

25 Apr, 2028

-
Included w.e.f.26.05.2025

IS/IEC 61730 : PART 2 (2016)

Photovoltaic (PV) module safety qualification: Part 2 requirements for testing (First Revision)

All

800000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 10.2(Visual inspection MST 01)	-	800000	-
Clause 10.3(Performance at STC MST 02)	-	800000	-
Clause 10.4(Maximum powerdetermination MST 03)	-	800000	-
Clause 10.5(Insulation thickness test MST 04)	-	800000	-
Clause 10.6(Durability of markings MST 05)	-	800000	-
Clause 10.7(Sharp edge test MST 06)	-	800000	-
Clause 10.8(Bypass diode functionality test MST 07)	-	800000	-
Clause 10.9(Accessibility test MST 11)	-	800000	-
Clause 10.10(Cut susceptibility test MST 12)	-	800000	-
Clause 10.11(Continuity test of equipotential bonding MST 13)	-	800000	-
Clause 10.12(Impulse voltage test MST 14)	-	800000	-
Clause 10.13(Insulation test MST 16)	-	800000	-
Clause 10.14(Wet leakage current test MST 17)	-	800000	-
Clause 10.15(Temperature test MST 21)	-	800000	-
Clause 10.16(Hot-spot endurance test MST 22)	-	800000	-
Clause 10.17(Fire test MST 23)	-	800000	-
Clause 10.18(Ignitability test MST 24)	-	800000	-
Clause 10.19(Bypass diode thermal test MST 25)	-	800000	-
Clause 10.20(Reverse current overload test MST 26)	-	800000	-
Clause 10.21(Module breakage test MST 32)	-	800000	-
Clause 10.22(Screw connections test MST 33)	-	800000	-
Clause 10.23(Static mechanical load test MST 34)	-	800000	-
Clause 10.24(Peel test MST 35)	-	800000	-
Clause 10.25(Lap shear strength test MST 36)	-	800000	-
Clause 10.26(Materials creep test MST 37)	-	800000	-
Clause 10.27(Robustness of terminations test MST 42)	-	800000	-
Clause 10.28(Thermal cycling test MST 51)	-	800000	-
Clause 10.29(Humidity freeze test MST 52)	-	800000	-
Clause 10.30(Damp heat test MST 53)	-	800000	-
Clause 10.31(UV test MST 54)	-	800000	-
Clause 10.32(Cold conditioning MST 55)	-	800000	-
Clause 10.33(Dry heat conditioning MST 56)	-	800000	-

25 Apr, 2028

-
Included w.e.f.26.05.2025

IS 14286 (2010)

Crystalline silicon terrestrial photovoltaic (PV) modules - Design qualification and type approval (First Revision)

all

700000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Marking)	-	700000	-
10.1(Visual inspection)	-	700000	-
10.2(Maximum power determination)	-	700000	-
10.3(Insulation test)	-	700000	-
10.4(Measurement of temperature coefficients)	-	700000	-
10.5(Measurement of NOCT)	-	700000	-
10.6(Performance at STC and NOCT)	-	700000	-
10.7(Performance at low irradiance)	-	700000	-
10.8(Outdoor exposure test)	-	700000	-
10.9(Hot-spot endurance test)	-	700000	-
10.10(UV preconditioning)	-	700000	-
10.11(Thermal cycling test)	-	700000	-
10.12(Humidity freeze test)	-	700000	-
10.13(Damp heat test)	-	700000	-
10.14(Robustness of termination test)	-	700000	-
10.15(Wet leakage current test)	-	700000	-
10.16(Mechanical load test)	-	700000	-
10.17(Hail test)	-	700000	-
10.18(Bypass diode thermal' test)	-	700000	-

25 Apr, 2028

-
Included w.e.f.26.05.2025

IS 14286 : Part 1 (2023)

Terrestrial Photovoltaic PV Modules Design Qualification and Type Approval Part 1: Test Requirements (Third Revision)

all

1450000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Visual inspection (MQT 01))	-	1450000	-
4.2(Maximum power determination (MQT 02))	-	1450000	-
4.3(Insulation test (MQT 03))	-	1450000	-
4.4(Measurement of temperature coefficients (MQT 04))	-	1450000	-
4.5(Placeholder section, formerly NMOT)	-	1450000	-
4.6(Performance at STC (MQT 06.1))	-	1450000	-
4.7(Performance at low irradiance (MQT 07))	-	1450000	-
4.8(Outdoor exposure test (MQT 08))	-	1450000	-
4.9(Hot-spot endurance test (MQT 09))	-	1450000	-
4.10(UV preconditioning test (MQT 10))	-	1450000	-
4.11(Thermal cycling test (MQT 11))	-	1450000	-
4.12(2 Humidity-freeze test (MQT 12))	-	1450000	-
4.13(Damp heat test (MQT 13))	-	1450000	-
4.14(Robustness of terminations (MQT 14))	-	1450000	-
4.15(5 Wet leakage current test (MQT 15))	-	1450000	-
4.16(Static mechanical load test (MQT 16))	-	1450000	-
4.17(Hail test (MQT 17))	-	1450000	-
4.18(Bypass diode testing (MQT 18))	-	1450000	-
4.19(Stabilization (MQT 19))	-	1450000	-
4.20(Cyclic (dynamic) mechanical load test (MQT 20))	-	1450000	-
4.21(Potential induced degradation test (MQT 21))	-	1450000	-
4.22(Bending test (MQT 22))	-	1450000	-

25 Apr, 2028

-
Included w.e.f.26.05.2025

IS 14286 : Part 1 : Sec 4 (2023)

Terrestrial photovoltaic PV modules Design qualification and type approval Part 1-4: Special requirements for testing of thin-film CuInGASSe2 based photovoltaic PV modules Third Revision

all

1450000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-8(Major visual defects)	-	1450000	-
Cl-11.1(Visual inspection (MQT 01))	-	1450000	-
Cl-11.2(Maximum power determination (MQT 02))	-	1450000	-
Cl-11.5(Measurement of nominal module operating temperature (NMOT) (MQT 05))	-	1450000	-
Cl-11.6(Performance at STC (MQT 06.1) and NMOT (MQT 06.2)	-	1450000	-
Cl-11.7(Performance at low irradiance (MQT 07))	-	1450000	-
Cl-11.8(Outdoor exposure test (MQT 08))	-	1450000	-
Cl-11.9(Hot-spot endurance test (MQT 09))	-	1450000	-
Cl-11.10(UV preconditioning test (MQT 10))	-	1450000	-
Cl-11.11(Thermal cycling test (MQT 11))	-	1450000	-
Cl-11.12(As per IEC 61215-1:2016)	-	1450000	-
Cl-11.13(Damp heat test (MQT 13))	-	1450000	-
Cl-11.14(Robustness of terminations test (MQT 14))	-	1450000	-
Cl-11.15(Robustness of terminations test (MQT 14))	-	1450000	-
Cl-11.16(Static mechanical load test (MQT 16))	-	1450000	-
Cl-11.17(Hail test (MQT 17))	-	1450000	-
Cl-11.18(Bypass diode testing (MQT 18))	-	1450000	-
Cl-11.19(Stabilization (MQT 19))	-	1450000	-
5(Marking and documentation)	-	1450000	-
11.20(Cyclic (dynamic) mechanical load test (MQT 20))	-	1450000	-
11.21(Potential induced degradation test (MQT 21))	-	1450000	-
11.22(Bending test (MQT 22))	-	1450000	-
Cl-11.4(Measurement of temperature coefficients (MQT 04))	-	1450000	-
Cl-11.3(Insulation test (MQT 03))	-	1450000	-

25 Apr, 2028

-
Included w.e.f.26.05.2025

IS 14286 : Part 1 : Sec 3 (2023)

Terrestrial photovoltaic PV modules Design qualification and type approval Part 1-3: Special requirements for testing of thin-film amorphous silicon based photovoltaic PV modules Third Revision

all

1450000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-8(Major visual defects)	-	1450000	-
Cl-11.1(Visual inspection)	-	1450000	-
Cl-11.2(Maximum power determination)	-	1450000	-
Cl-11.3(Insulation test)	-	1450000	-
Cl-11.4(Measurement of temperature coefficients)	-	1450000	-
Cl-11.5(Measurement of nominal module operating temperature)	-	1450000	-
Cl-11.6(Performance at STC and NMOT)	-	1450000	-
Cl-11.7(Performance at low irradiance)	-	1450000	-
Cl-11.8(Outdoor exposure test)	-	1450000	-
Cl-11.9(Hot-spot endurance test)	-	1450000	-
Cl-11.10(UV preconditioning test)	-	1450000	-
Cl-11.11(Thermal cycling test)	-	1450000	-
Cl-11.12(Humidity-freeze test)	-	1450000	-
Cl-11.13(Damp heat test)	-	1450000	-
Cl-11.14(Robustness of terminations test)	-	1450000	-
Cl-11.15(Wet leakage current test)	-	1450000	-
Cl-11.16(Static mechanical load test)	-	1450000	-
Cl-11.17(Hail test)	-	1450000	-
Cl-11.18(Bypass diode testing)	-	1450000	-
Cl-11.19(Stabilization)	-	1450000	-
5(Marking and documentation)	-	1450000	-
11.20(Cyclic (dynamic) mechanical load test (MQT 20))	-	1450000	-
11.21(Potential induced degradation test (MQT 21))	-	1450000	-
11.22(Bending test (MQT 22))	-	1450000	-

25 Apr, 2028

-
Included w.e.f.26.05.2025

IS 14286 : Part 1 : Sec 2 (2023)

Terrestrial photovoltaic PV modules Design qualification and type approval Part 1-2: Special requirements for testing of thin-film Cadmium Telluride CdTe based photovoltaic PV modules Third Revision

all

1450000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-8(Major visual defects)	-	1450000	-
Cl-11.1(Visual inspection)	-	1450000	-
Cl-11.2(Maximum power determination)	-	1450000	-
Cl-11.3(Insulation tes)	-	1450000	-
Cl-11.4(Measurement of temperature coefficients)	-	1450000	-
Cl-11.5(Measurement of nominal module operating temperature)	-	1450000	-
Cl-11.6(Performance at STC and NMOT)	-	1450000	-
Cl-11.7(Performance at low irradiance)	-	1450000	-
Cl-11.8(Outdoor exposure test)	-	1450000	-
Cl-11.9(Hot-spot endurance test)	-	1450000	-
Cl-11.10(UV preconditioning test)	-	1450000	-
Cl-11.11(Thermal cycling test)	-	1450000	-
Cl-11.12(Humidity-freeze test)	-	1450000	-
Cl-11.13(Damp heat test)	-	1450000	-
Cl-11.14(Robustness of terminations test)	-	1450000	-
Cl-11.15(Wet leakage current test)	-	1450000	-
Cl-11.16(Static mechanical load test)	-	1450000	-
Cl-11.17(Hail test)	-	1450000	-
Cl-11.18(Bypass diode testing)	-	1450000	-
Cl-11.19(Stabilization)	-	1450000	-
5(Marking and documentation)	-	1450000	-
11.20(Cyclic (dynamic) mechanical load test (MQT 20))	-	1450000	-
11.21(Potential induced degradation test (MQT 21))	-	1450000	-
11.22(Bending test (MQT 22))	-	1450000	-

25 Apr, 2028

-
Included w.e.f.26.05.2025

IS 14286 : Part 1 : Sec 1 (2023)

Terrestrial photovoltaic PV modules Design qualification and type approval Part 1-1: Special requirements for testing of crystalline silicon photovoltaic PV modules Third Revision

all

1450000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-8(Major visual defects)	-	1450000	-
Cl-11.1(Visual inspection)	-	1450000	-
Cl-11.2(Maximum power determination)	-	1450000	-
Cl-11.3(Insulation test)	-	1450000	-
Cl-11.4(Measurement of temperature coefficients)	-	1450000	-
Cl-11.5(Measurement of nominal module operating temperature)	-	1450000	-
Cl-11.6(Performance at STC)	-	1450000	-
Cl-11.7(Performance at low irradiance)	-	1450000	-
Cl-11.8(Outdoor exposure test)	-	1450000	-
Cl-11.9(Hot-spot endurance test)	-	1450000	-
Cl-11.10(UV preconditioning test)	-	1450000	-
Cl-11.11(Thermal cycling test)	-	1450000	-
Cl-11.12(Humidity-freeze test)	-	1450000	-
Cl-11.13(Damp heat test)	-	1450000	-
Cl-11.14(Robustness of terminations test)	-	1450000	-
Cl-11.15(Wet leakage current tes)	-	1450000	-
Cl-11.16(Static mechanical load test)	-	1450000	-
Cl-11.17(Hail test)	-	1450000	-
Cl-11.18(Bypass diode thermal test)	-	1450000	-
Cl-11.19(Stabilization)	-	1450000	-
5(Marking and documentation)	-	1450000	-
11.20(Cyclic (dynamic) mechanical load test (MQT 20))	-	1450000	-
11.21(Potential induced degradation test (MQT 21))	-	1450000	-
11.22(Bending test (MQT 22))	-	1450000	-
Cl-8(Major visual defects)	-	1450000	-
Cl-11.1(Visual inspection)	-	1450000	-
Cl-11.2(Maximum power determination)	-	1450000	-
Cl-11.3(Insulation test)	-	1450000	-
Cl-11.4(Measurement of temperature coefficients)	-	1450000	-
Cl-11.5(Measurement of nominal module operating temperature)	-	1450000	-
Cl-11.6(Performance at STC)	-	1450000	-
Cl-11.7(Performance at low irradiance)	-	1450000	-
Cl-11.8(Outdoor exposure test)	-	1450000	-
Cl-11.9(Hot-spot endurance test)	-	1450000	-
Cl-11.10(UV preconditioning test)	-	1450000	-
Cl-11.11(Thermal cycling test)	-	1450000	-
Cl-11.12(Humidity-freeze test)	-	1450000	-
Cl-11.13(Damp heat test)	-	1450000	-
Cl-11.14(Robustness of terminations test)	-	1450000	-
Cl-11.15(Wet leakage current tes)	-	1450000	-
Cl-11.16(Static mechanical load test)	-	1450000	-
Cl-11.17(Hail test)	-	1450000	-
Cl-11.18(Bypass diode thermal test)	-	1450000	-
Cl-11.19(Stabilization)	-	1450000	-
5(Marking and documentation)	-	1450000	-
11.20(Cyclic (dynamic) mechanical load test (MQT 20))	-	1450000	-
11.21(Potential induced degradation test (MQT 21))	-	1450000	-
11.22(Bending test (MQT 22))	-	1450000	-

25 Apr, 2028

-
Included w.e.f.26.05.2025

IS 12823 (2015)

Prelaminated Particle Boards from Wood and other Lignocellulosic Material - Specification ( First Revision )

all

22500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 4(Grades & Types)	-	22500	-
Cl 6(Manufacture)	-	22500	-
Cl 7(Finish)	-	22500	-
Cl 8(Dimensions & Tolerances)	-	22500	-
Cl 10.2(Test For Density)	-	22500	-
Cl 10.3(Test For Moisture Content)	-	22500	-
Cl 10.4(For Water AbsorptionTest )	-	22500	-
Cl 10.5(For Swelling in water Test )	-	22500	-
Cl 10.6(Tesr For Modulus Of Elasticity & Mudulus Of Rupture)	-	22500	-
Cl 10.7(For Determination of Tensile Strength Perpendicular to Surface)	-	22500	-
Cl 10.8(For Determination of Tensile Strength Perpendicular to Surface After Ageing Test)	-	22500	-
Cl 10.9(Test For Screw Withdrawal Strength)	-	22500	-
Cl 10.10 & Annex C( Test For Abrasion Resistance)	-	22500	-
Cl 10.11 & Annex D( Test For Resistance to Steam)	-	22500	-
Cl 10.12 & Annex E( Test For Crack Resistance)	-	22500	-
Cl 10.13 & Annex F( Test For Resistance to Cigarette Burn)	-	22500	-
Cl 10.14 & Annex G( Test For Resistance to Stain)	-	22500	-
Cl 4(Grades & Types)	-	22500	-
Cl 6(Manufacture)	-	22500	-
Cl 7(Finish)	-	22500	-
Cl 8(Dimensions & Tolerances)	-	22500	-
Cl 10.2(Test For Density)	-	22500	-
Cl 10.3(Test For Moisture Content)	-	22500	-
Cl 10.4(For Water AbsorptionTest )	-	22500	-
Cl 10.5(For Swelling in water Test )	-	22500	-
Cl 10.6(Tesr For Modulus Of Elasticity & Mudulus Of Rupture)	-	22500	-
Cl 10.7(For Determination of Tensile Strength Perpendicular to Surface)	-	22500	-
Cl 10.8(For Determination of Tensile Strength Perpendicular to Surface After Ageing Test)	-	22500	-
Cl 10.9(Test For Screw Withdrawal Strength)	-	22500	-
Cl 10.10 & Annex C( Test For Abrasion Resistance)	-	22500	-
Cl 10.11 & Annex D( Test For Resistance to Steam)	-	22500	-
Cl 10.12 & Annex E( Test For Crack Resistance)	-	22500	-
Cl 10.13 & Annex F( Test For Resistance to Cigarette Burn)	-	22500	-
Cl 10.14 & Annex G( Test For Resistance to Stain)	-	22500	-
Cl 10.14 & Annex G( Test For Resistance to Stain)	-	22500	-
Cl 10.13 & Annex F( Test For Resistance to Cigarette Burn)	-	22500	-
Cl 10.12 & Annex E( Test For Crack Resistance)	-	22500	-
Cl 10.11 & Annex D( Test For Resistance to Steam)	-	22500	-
Cl 10.10 & Annex C( Test For Abrasion Resistance)	-	22500	-
Cl 10.9(Test For Screw Withdrawal Strength)	-	22500	-
Cl 10.8(For Determination of Tensile Strength Perpendicular to Surface After Ageing Test)	-	22500	-
Cl 10.7(For Determination of Tensile Strength Perpendicular to Surface)	-	22500	-
Cl 10.6(Tesr For Modulus Of Elasticity & Mudulus Of Rupture)	-	22500	-
Cl 10.5(For Swelling in water Test )	-	22500	-
Cl 10.4(For Water AbsorptionTest )	-	22500	-
Cl 10.3(Test For Moisture Content)	-	22500	-
Cl 10.2(Test For Density)	-	22500	-
Cl 8(Dimensions & Tolerances)	-	22500	-
Cl 7(Finish)	-	22500	-
Cl 6(Manufacture)	-	22500	-
Cl 4(Grades & Types)	-	22500	-
Cl 10.15(Test for Formaldehyde Content/Emission)	-	22500	-
Cl-11(ADDITIONAL REQUIREMENTS FOR ECO-MARK)	-	22500	-

25 Apr, 2028

-
Included w.e.f 19.05.2025

IS 3097 (2006)

Veneered Particle Boards -Specification

all

35000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause No - 3(TERMINOLOGY)	-	35000	-
Clause No - 4(GRADES AND TYPES)	-	35000	-
Clause No - 5.1(Particle Board)	-	35000	-
Clause No - 5.2.1.1("Timbers for face veneers of decorative type veneered particle boards")	-	35000	-
Clause No - 5.2.1.1(a)("particle boards, shall be of Type A or Type B surface ")	-	35000	-
Clause No - 5.3(Adhesive)	-	35000	-
Clause No - 6.1(Preservative Treatment of Veneers)	-	35000	-
Clause No - 6.2.7(Lipping)	-	35000	-
Clause No - 7(Dimensional Tolerance)	-	35000	-
Clause No - 9.1 (1(cutting the test specimens)	-	35000	-
Clause No - 9.1 (2(" method of preparation and conditioning oftest specimens")	-	35000	-
Clause No - 9.1 (a(Determination of density)	-	35000	-
Clause No - 9.1 (b(Determination of moisture content)	-	35000	-
Clause No - 9.1 (c(Water absorption)	-	35000	-
Clause No - 9.1 (e) (1(Determination of swelling in water - Swelling due to general absorption)	-	35000	-
Clause No - 9.1 (e) (2(Determination of swelling in water -Swelling due to surface absorption)	-	35000	-
Clause No - 9.1 (g)("Modulus of rupture (MOR) and modulus of elasticity (MOE) ")	-	35000	-
Clause No - 9.1 (h)("Determination of deflection under sustained load (long time loading test)")	-	35000	-
Clause No - 11(MARKING)	-	35000	-
Clause 9.1 d) Water Resistance test(Clause 9.1 d) Water Resistance test)	-	35000	-
9.1 f)Adhesion of plies(9.1 f)Adhesion of plies)	-	35000	-

25 Apr, 2028

-
Included w.e.f 19.05.2025

IS 1328 (1996)

Veneered Decorative Plywood -Specification

all

9500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Grade - For BWR)	-	9500	-
4.1(Grade - For MR)	-	9500	-
4.2(Type - For Type 1)	-	9500	-
4.2(Type - For Type 2)	-	9500	-
7.1.1(Requirements - Open splits, checks or open joints - For Type 1 - Cl. 7.1.1)	-	9500	-
7.2.1(Requirements - Open splits, checks or open joints - For Type 2 - Cl. 7.2.1)	-	9500	-
7.1.2(Requirements - Other defects - For Type 1 - Cl. 7.1.2)	-	9500	-
7.2.2(Requirements - Other defects - For Type 2 - Cl. 7.2.2.)	-	9500	-
7.1.3(Requirements - Other Charcteristics and Manufacturing Defects - For Type 1 - Cl. 7.1.3)	-	9500	-
7.2.3(Requirements - Other Charcteristics and Manufacturing Defects - For Type 2 - Cl. 7.2.3)	-	9500	-
8(Dimensions & Tolerances - Length - Cl. 8)	-	9500	-
8(Dimensions & Tolerances - Width - Cl. 8)	-	9500	-
8(Dimensions & Tolerances - Thickness - Cl. 8)	-	9500	-
8(Dimensions & Tolerances - Edge Straightness - Annexure C)	-	9500	-
8(Dimensions & Tolerances - Squareness - Annexure C)	-	9500	-
9(Finish - Cl. 9.1, 8.3)	-	9500	-
9(Finish - Cl. 9.2, 8.3)	-	9500	-
11(Tests - Moisture Content - Part 1 of IS 1734)	-	9500	-
11(Tests - Water Resistance Test - Cl. 11.1.2.1 [for MR Grade])	-	9500	-
11(Tests - Water Resistance Test - Cl. 11.1.2.2 [for BWR Grade])	-	9500	-
6.1(Decorative Veneers (Thickness))	-	9500	-

25 Apr, 2028

-
Included w.e.f 19.05.2025

IS 2191 : Part 2 (2022)

WOODEN FLUSH DOOR SHUTTERS (CELLULAR, HOLLOW AND TUBULAR CORE TYPE) - SPECIFICATION PART 2 PARTICLE BOARD, HIGH DENSITY FIBRE BOARD, MEDIUM DENSITY FIBRE BOARD AND FIBRE HARDBOARD FACE PANELS (Fourth Revision)

all

30000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5(Sizes and Tolerances)	-	30000	-
Cl-6.1.(Timber)	-	30000	-
Cl-6.2(Laminated veneer lumber (LVL), veneer laminated lumber (VLL), medium density fibre board (MDF), high density fibre board (HDF))	-	30000	-
Cl-6.3.1(Particle board)	-	30000	-
Cl-6.3.2(MDF board and HDF board)	-	30000	-
Cl-6.3.5(shutters with fibre hardboard face)	-	30000	-
Cl-8.1(Locks)	-	30000	-
Cl-10.1(various test)	-	30000	-
Cl-10.2(End Immersion Test)	-	30000	-
Cl-10.3(Glue Adhesion Test)	-	30000	-
Cl-13(Marking)	-	30000	-

25 Apr, 2028

-
Included w.e.f 19.05.2025

IS 848 (2006)

Synthetic resin adhesives for plywood (Phenolic And Aminoplastic) - Specification (Second Revision)

all

8500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4 Table (i)(BWP (BOiling WaterProof))	-	8500	-
4 Table (i)(BWR (Boiling Water Resistant))	-	8500	-
5,7.4(Keeping Quality (Resistance to heat Polymerization))	-	8500	-
4 Table (i)(MR (Moisture Ressistant))	-	8500	-
7.4(Acidity and Alkalinity ( pH))	-	8500	-

25 Apr, 2028

-
Included w.e.f 19.05.2025

IS 2202 : Part 1 (2023)

WOODEN FLUSH DOOR SHUTTERS SOLID CORE TYPE SPECIFICATION PART 1 PLYWOOD FACE PANELS Seventh Revision

ALL

28000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
9.1(Workmanship & Finish)	-	28000	-
9.2(Workmanship & Finish)	-	28000	-
9.3(Workmanship & Finish)	-	28000	-
11.1(Dimensions - Height)	-	28000	-
11.1(Dimensions - Width)	-	28000	-
11.1(Dimensions - Thickness)	-	28000	-
11.1(Dimensions - Variation in thickness)	-	28000	-
11.1(Dimensions - Squareness)	-	28000	-
11.12(End immersion test)	-	28000	-
11.13(Knife Test)	-	28000	-
11.14(Glue Adhesion Test)	-	28000	-
4(GRADE)	-	28000	-
4(TYPE)	-	28000	-
5(SIZES)	-	28000	-
7.1.1(CONSTRUCTION-Blockboard Core)	-	28000	-
7.1.1(CONSTRUCTION-Blockboard Core)	-	28000	-
7.1.2(CONSTRUCTION-Blockboard Core)	-	28000	-
7.3.2(CONSTRUCTION-Stiles and Rails)	-	28000	-
7.3.2(a)(CONSTRUCTION-Stiles and Rails-Joints)	-	28000	-
7.3.2(b)(CONSTRUCTION-Stiles and Rails-Joints)	-	28000	-
7.3.2(c)(CONSTRUCTION-Stiles and Rails-Joints)	-	28000	-
7.3.3(CONSTRUCTION-Stiles and Rails)	-	28000	-
9.1(WORKMANSHIP AND FINISH)	-	28000	-
9.2(WORKMANSHIP AND FINISH)	-	28000	-
9.3(WORKMANSHIP AND FINISH)	-	28000	-
11.1(Dimensions and Squareness Test)	-	28000	-
11.1(Dimensions and Squareness Test)	-	28000	-
11.1(Dimensions and Squareness Test)	-	28000	-
11.1(Dimensions and Squareness Test)	-	28000	-
11.1(Dimensions and Squareness Test)	-	28000	-
11.2(General Flatness Test)	-	28000	-
11.2(General Flatness Test)	-	28000	-
11.2(General Flatness Test)	-	28000	-
11.3(Local Planeness Test)	-	28000	-
11.4(Impact Indentation Test)	-	28000	-
11.4(Impact Indentation Test)	-	28000	-
11.5(Flexure Test)	-	28000	-
11.5(Flexure Test)	-	28000	-
11.6(Edge Loading Test)	-	28000	-
11.6(Edge Loading Test)	-	28000	-
11.6(Edge Loading Test)	-	28000	-
11.6(Edge Loading Test)	-	28000	-
11.7.1(Shock Resistance Test)	-	28000	-
11.7.2(Shock Resistance Test)	-	28000	-
11.8(Buckling Test)	-	28000	-
11.8(Buckling Test)	-	28000	-
11.8(Buckling Test)	-	28000	-
11.9.2(Slamming Test)	-	28000	-
11.9.3(Slamming Test)	-	28000	-
11.10(Misuse Test)	-	28000	-
11.11(Varying Humidity Test)	-	28000	-
11.11(Varying Humidity Test)	-	28000	-
11.12(End Immersion Test)	-	28000	-
11.13(Knife Test)	-	28000	-
11.14(Glue Adhesion Test)	-	28000	-
11.15(Screw Withdrawal Resistance Test)	-	28000	-
11.15(Screw Withdrawal Resistance Test)	-	28000	-
Clause 4.2(grades specified)	-	28000	-
Clause 5(SIZES)	-	28000	-
Clause 6.1.1(species of timber)	-	28000	-
Clause 6.1.2(list of species)	-	28000	-
Clause 6.1.3(moisture content)	-	28000	-
Clause 6.2.1(Plywood)	-	28000	-
Clause 6.2.2(Decorative plywood)	-	28000	-
Clause 6.3(Cross-Bands)	-	28000	-
Clause 6.4.1(Commercial Face Veneers)	-	28000	-
Clause 6.4.2(Decorative Face Veneers)	-	28000	-
Clause 6.6.1(Adhesives)	-	28000	-
Clause 6.7(Particle Board)	-	28000	-
Clause 6.8(Medium density fibre board)	-	28000	-
Clause 6.9(Alternative Materials)	-	28000	-
Clause 7.1(Blockboard Core)	-	28000	-
Clause 7.2(Particle Board or Medium Density Fibre)	-	28000	-
Clause 7.3(Stiles and Rails)	-	28000	-
Clause 7.4(Levelling)	-	28000	-
Clause 7.5(Face Panel)	-	28000	-
Clause 7.6(Lipping)	-	28000	-
Clause 7.7(Rebating)	-	28000	-
Clause 7.8(Opening for Glazing)	-	28000	-
Clause 7.9(Venetian)	-	28000	-
Clause 8.1(Locks)	-	28000	-
Clause 9(WORKMANSHIP AND FINISH)	-	28000	-
Clause 10.1(Classification of Tests)	-	28000	-
Clause 11.1(Dimensions and Squareness Test)	-	28000	-
Clause 11.2(General Flatness Test)	-	28000	-
Clause 11.3(Local Planeness Test)	-	28000	-
Clause 11.4(Impact Indentation Test)	-	28000	-
Clause 11.5(Flexure Test)	-	28000	-
Clause 11.6(Edge Loading Test)	-	28000	-
Clause 11.7(Shock Resistance Test)	-	28000	-
Clause 11.8(Buckling Resistance Test)	-	28000	-
Clause 11.9(Slamming Test)	-	28000	-
Clause 11.10(Misuse Test)	-	28000	-
Clause 11.11(Varying Humidity Test)	-	28000	-
Clause 11.12(End Immersion Test)	-	28000	-
Clause 11.13(Knife Test)	-	28000	-
Clause 11.14(Glue Adhesion Test)	-	28000	-
Clause 11.15(Screw Withdrawal Resistance Test)	-	28000	-
Clause 12(SAMPLING AND CRITERIA FOR CONFORMITY)	-	28000	-
Clause 13(ADDITIONAL REQUIREMENTS FOR ECO MARK)	-	28000	-
Clause 14(Marking)	-	28000	-
4(Grade, Type and Construction)	-	28000	-
5(Sizes and Thickness)	-	28000	-
6.1(Timber)	-	28000	-
6.2(Plywood for flush door shutter)	-	28000	-
6.3(Cross-Bands )	-	28000	-
6.4.1(Commercial Face Veneers)	-	28000	-
6.4.2(Decorative face veneers)	-	28000	-
6.6(Adhesives)	-	28000	-
6.7(Particle Board)	-	28000	-
6.8(Medium Density Fibre)	-	28000	-
6.9(Alternative Materials)	-	28000	-
7(Construction)	-	28000	-
8.1(Locks)	-	28000	-
8.2(Other Fittings)	-	28000	-
9(Workmanship and Finish)	-	28000	-
10(Tests)	-	28000	-
11.1(Dimensions and Squareness Test)	-	28000	-
11.2(General Flatness Test)	-	28000	-
11.3(Local Planeness Test)	-	28000	-
11.4(Impact Indentation Test)	-	28000	-
11.5(Flexure Test)	-	28000	-
11.6(Edge Loading Test)	-	28000	-
11.7(Shock Resistance Test)	-	28000	-
11.8(Buckling Resistance Test)	-	28000	-
11.9(Slamming Test)	-	28000	-
11.1(Misuse Test)	-	28000	-
11.11(Varying Humidity Test)	-	28000	-
11.12(End Immersion Test)	-	28000	-
11.13(Knife Test)	-	28000	-
11.14(Glue Adhesion Test)	-	28000	-
11.15(Screw Withdrawal Resistance Test)	-	28000	-
14(Marking )	-	28000	-
Cl-13(ADDITIONAL REQUIREMENTS FOR ECO MARK)	-	28000	-

25 Apr, 2028

-
Included w.e.f 19.05.2025

IS 5509 (2021)

Fire Retardant Plywood - Specification ( Third Revision )

Fire Retardant Plywood

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.3 (Table 1)(b) 6 mm and above)	-	15000	GST excluded
4.1(Flame retardant chemicals)	-	15000	GST excluded
4.2(Flame retardant and preservative treatment)	-	15000	GST excluded
4.3(Treatment)	-	15000	GST excluded
5(PREPARATION FOR TREATMENT)	-	15000	GST excluded
6.1.1(Treatment of Plywood by Pressure Impregnation after Manufacture)	-	15000	GST excluded
6.1.2(Soaking Treatment)	-	15000	GST excluded
6.2(Choice of Treatment)	-	15000	GST excluded
7(CONDITIONING AFTER TREATMENT)	-	15000	GST excluded
8.1(Dimensions)	-	15000	GST excluded
8.2(Thickness)	-	15000	GST excluded
8.3, Taable-1 (i)(Tolerance- Length)	-	15000	GST excluded
9(WORKMANSHIP AND FINISH)	-	15000	GST excluded
10(SAMPLING AND CRITERIA FOR CONFORMITY)	-	15000	GST excluded
11 (a)(For flammability)	-	15000	GST excluded
11 (b)(For flame penetration)	-	15000	GST excluded
11 (c)(For rate of burning)	-	15000	GST excluded
12.1 Table - 2 (i)(Moisture content, percent, Max)	-	15000	GST excluded
12.1 Table - 2 (ii)(Flammability (see Note 1), minutes, Min)	-	15000	GST excluded
12.1 Table - 2 (iii)(Flame penetration (see Note 2), minutes, Min)	-	15000	GST excluded
12.1 Table - 2 (iv)(Rate of burning (see Note 3), minutes, Min)	-	15000	GST excluded
12.2(Other Tests)	-	15000	GST excluded
14(Marking)	-	15000	GST excluded
Cl-13(ADDITIONAL REQUIREMENTS FOR ECO-MARK)	-	15000	GST excluded

25 Apr, 2028

-
-

IS 10701 (2012)

Structural plywood - Specification (First Revision)

Structural Plywood

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
11.3(Glue Shear strength in dry state)	-	25000	GST excluded
11.4.1(Resistance to Water)	-	25000	GST excluded
11.4.2(Resistance to Water)	-	25000	GST excluded
11.5(Resistance to Micro-organisms)	-	25000	GST excluded
11.6(Tensile Strength)	-	25000	GST excluded
11.7.1(Compressive Strength, Bending Strength, Panel Shear Strength, Plate Shear Strength and Rolling Shear Strngth)	-	25000	GST excluded
11.8(Wet Bending Strength)	-	25000	GST excluded
Clause 11.2(Moisture content)	-	25000	GST excluded
Cl-8(Dimension and tolerances)	-	25000	GST excluded
Cl-9(Workmanship and finish)	-	25000	GST excluded
Cl-7.1(Veneers)	-	25000	GST excluded
Cl-7.2(Construction)	-	25000	GST excluded
Cl-11.9(Retention of preservatives)	-	25000	GST excluded
Cl-4(Material)	-	25000	GST excluded
Cl-5(Plywood)	-	25000	GST excluded
Clause. 7.3(Consruction Inclination)	-	25000	GST excluded
Clause. 7.4(Moisture content)	-	25000	GST excluded

25 Apr, 2028

-
-

IS 2191 : Part 1 (2022)

WOODEN FLUSH DOOR SHUTTERS CELLULAR TUBULAR AND HOLLOW CORE TYPE SPECIFICATION PART 1 PLYWOOD FACE PANELS Fifth Revision

Wooden Flush Door Shutters

30000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5(Sizes)	-	30000	GST excluded
Cl-6.1.1(Species of timber)	-	30000	GST excluded
Cl-6.3(Cross-Bands)	-	30000	GST excluded
Cl-6.4.1(Commercial face veneers)	-	30000	GST excluded
Cl-6.4.2(Decorative face veneers)	-	30000	GST excluded
Cl-6.7(Particle Board)	-	30000	GST excluded
Cl-6.8(Laminated veneer lumber (LVL), veneer laminated lumber (VLL), Medium Density Fibre (MDF))	-	30000	GST excluded
Cl-11.1(Dimensions and Squareness Test)	-	30000	GST excluded
Cl-11.2(General Flatness Test)	-	30000	GST excluded
Cl-11.3(Local Planeness Test)	-	30000	GST excluded
Cl-11.4(Impact Indentation Test)	-	30000	GST excluded
Cl-11.5(Flexure Test)	-	30000	GST excluded
Cl-11.6(Edge Loading Test)	-	30000	GST excluded
Cl-11.7(Shock Resistance Test)	-	30000	GST excluded
Cl-11.8(Buckling Resistance Test)	-	30000	GST excluded
Cl-11.9(Slamming Test)	-	30000	GST excluded
Cl-11.10(Misuse Test)	-	30000	GST excluded
Cl-11.11(Varying Humidity Test)	-	30000	GST excluded
Cl-11.12(End Immersion Test)	-	30000	GST excluded
Cl-11.13(Knife Test)	-	30000	GST excluded
Cl-11.14(Glue Adhesion Test)	-	30000	GST excluded
Cl-11.15(Screw Withdrawal Resistance Test)	-	30000	GST excluded
Cl-12.2(Sample Size)	-	30000	GST excluded
Cl-14(Marking)	-	30000	GST excluded
Cl-6.1.2(Moisture content of timber)	-	30000	GST excluded
Cl-9(Workmanship and Finish)	-	30000	GST excluded
Cl-6.1.3(Defects)	-	30000	GST excluded
Cl-6.2(Plywood)	-	30000	GST excluded
Cl-6.5(Cross-bands and face veneers)	-	30000	GST excluded
Cl-6.6(Adhesives)	-	30000	GST excluded
Cl-7(Construction)	-	30000	GST excluded
Cl-8(Fittings)	-	30000	GST excluded

25 Apr, 2028

-
-

IS 14587 (2023)

Prelaminated Medium Density Fibre Board - Specification

Plelaminated MDF Board

35000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5.1(Medium Density Fibre (MDF) Board)	-	35000	GST excluded
Cl-7(Finish)	-	35000	GST excluded
Cl-8.1(Dimensions of prelaminated MDF)	-	35000	GST excluded
Cl-8.2(Tolerances)	-	35000	GST excluded
Cl-8.2.1(Edge straightness)	-	35000	GST excluded
Cl-9.1 S.No-(1), i(Density, kg/m3)	-	35000	GST excluded
Cl-9.1 S.No-(1), ii(Variation from mean density, percent)	-	35000	GST excluded
Cl-9.1 S.No-(1), iii(Moisture content, percent)	-	35000	GST excluded
Cl-9.1 S.No-(1), iv(Variation from mean moisture content, percent (absolute))	-	35000	GST excluded
Cl-9.1 S.No-(1), v(Linear expansion (thickness swelling in water), due to general absorption after 24 h soaking, percent, Max)	-	35000	GST excluded
Cl-9.1 S.No-(1), vi(Internal bond strength, N/mm2, Min)	-	35000	GST excluded
Cl-9.1 S.No-(1), vii,a(After cyclic test)	-	35000	GST excluded
Cl-9.1 S.No-(1), vii,b(After accelerated water resistance test)	-	35000	GST excluded
Cl-9.1 S.No-(1), viii(Modulus of rupture, N/mm2 , Min)	-	35000	GST excluded
Cl-9.1 S.No-(1), ix(Modulus of elasticity, N/mm2 , Min)	-	35000	GST excluded
Cl-9.1 S.No-(1), x,(Screw withdrawal strength, ????????, Min)	-	35000	GST excluded
Cl-9.1 S.No-(1), xi(Formaldehyde content (Fc), mg/100 g for oven dry board)	-	35000	GST excluded
Cl-9.1 S.No-(1), xii(Steady-state formaldehyde emission (Fc), mg/m3)	-	35000	GST excluded
Cl-9.1 S.No-(1), xiii(Abrasion resistance in number of revolutions, Min, (Type 1 to 4))	-	35000	GST excluded
Cl-9.1 S.No-(1), xiv(Resistance to steam/water vapours)	-	35000	GST excluded
Cl-9.1 S.No-(1), xv(Resistance to crack)	-	35000	GST excluded
Cl-9.1 S.No-(1), xvi(Resistance to a cigarette burn)	-	35000	GST excluded
Cl-9.1 S.No-(1), xvii(Resistance to stain)	-	35000	GST excluded
Cl-11.2(Specific Requirement)	-	35000	GST excluded
Cl-12(Marking)	-	35000	GST excluded
Cl-5.2(Impregnated Base Paper)	-	35000	GST excluded
Cl-5.3(Impregnated Overlay)	-	35000	GST excluded

25 Apr, 2028

-
Exclusions: Cl-9.1 S.No-(1), xii (Steady-state formaldehyde emission (Fc), mg/m3)

IS 12406 (2021)

Medium density fibre boards for general purpose - Specification

MDF Boards

18000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clauses 5.2, 9 and 10.2.2(Density)	-	18000	GST excluded
Clauses 5.2, 9 and 10.2.2(Density)	-	18000	GST excluded
Clauses 5.2, 9 and 10.2.2(Variation from mean density)	-	18000	GST excluded
Clauses 5.2, 9 and 10.2.2(Moisture Content)	-	18000	GST excluded
Clauses 5.2, 9 and 10.2.2(Variation from mean moisture content)	-	18000	GST excluded
Clauses 5.2, 9 and 10.2.2(Linear expansion (Thickness Swelling in Water) Due to general Absorption after 24h soaking)	-	18000	GST excluded
Clauses 5.2, 9 and 10.2.2(Internal Bond Strength)	-	18000	GST excluded
Clauses 5.2, 9 and 10.2.2(Internal Bond strength (i) (After Cyclic test) (ii) (After accelerated water resistance test))	-	18000	GST excluded
Clauses 5.2, 9 and 10.2.2(Modulus of Rupture a) Avg. Value b) Min. Individual)	-	18000	GST excluded
Clauses 5.2, 9 and 10.2.2(Modulus of Elasticity a) Avg. Value b) Min. Individual)	-	18000	GST excluded
Clauses 5.2, 9 and 10.2.2(Screw withdrawl strength (i) Face (ii) Edge (For thickness >12mm))	-	18000	GST excluded
Clauses 5.2, 9 and 10.2.2(Formaldehyde Content (i) For Formaldehyde Class, E1 (ii) For Formaldehyde Class, E2)	-	18000	GST excluded
Clauses 5.2, 9 and 10.2.2(Steady State Formaldehyde emission (Fc (i) For Formaldehyde Class, E1 (ii) For Formaldehyde Class, E2)	-	18000	GST excluded
8(DIMENSIONS AND TOLERANCES)	-	18000	GST excluded
Cl-11(ADDITIONAL REQUIREMENTS FOR ECO-MARK)	-	18000	GST excluded
Cl 7(Finish)	-	18000	GST excluded

25 Apr, 2028

-
Exclusion: Clauses 5.2, 9 and 10.2.2 Steady-state Formaldehyde emission

IS 2202 : Part 2 (2022)

WOODEN FLUSH DOOR SHUTTERS SOLID CORE TYPE SPECIFICATION PART 2 PARTICLE BOARD HIGH DENSITY FIBRE BOARD MEDIUM DENSITY FIBRE BOARD AND HARDBOARD FACE PANELS Fourth Revision

Wooden Flush Door Shutters

30000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause No - 6.1(Timber)	-	30000	GST excluded
Clause No -6.2(Alternative Materials (LVL)	-	30000	GST excluded
Clause No -6.2(Alternative Materials veneer laminated lumber (VLL))	-	30000	GST excluded
Clause No -6.2(Alternative Materials medium density fibre board (MDF))	-	30000	GST excluded
Clause No -6.2(Alternative Materials -plywood)	-	30000	GST excluded
Clause No -6.2(BWP grade flush door shutter)	-	30000	GST excluded
Clause No -6.3.1("Face Panels: Particle Board MDF/ HDF Fibre Hardboard")	-	30000	GST excluded
Clause No -6.4(Adhesive)	-	30000	GST excluded
Clause No -7.1(Construction)	-	30000	GST excluded
Clause No - 7.3(" MDF board or HDF board ")	-	30000	GST excluded
Clause No -9.2("Workmanship and finish")	-	30000	GST excluded
Clause No -10.1(tests for flush door shutters)	-	30000	GST excluded
Clause No -10.2(End Immersion Test)	-	30000	GST excluded
Clause No -10.3(Glue Adhesion Test)	-	30000	GST excluded
Clause No -11(SAMPLING AND CRITERIA FOR CONFORMITY)	-	30000	GST excluded
Clause No -12("ADDITIONAL REQUIREMENTS FOR ECO MARK")	-	30000	GST excluded
5(SIZES AND TOLERANCES)	-	30000	-
6.5(The swelling in thickness of the particle board, MDF and HDF board for core)	-	30000	-
Cl-6.3.3 (Amendment NO 1)(B D P V, P D P V and M D P V types of flush door)	-	30000	GST excluded
Cl-6.3.2(MDF board and HDF board)	-	30000	GST excluded
Cl-6.3.4(B N P V, P N P V and M N P V,)	-	30000	GST excluded
Cl-7.2(Face Panel)	-	30000	GST excluded
Cl-7.4 (Amendment No 1)(Door Blanks)	-	30000	GST excluded
Cl-8(Fittings)	-	30000	GST excluded

25 Apr, 2028

-
-

IS 1659 (2004)

Block boards - Specification (Fourth Revision)

Block Boards

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
9.2.6(Spot test - Annexure L)	-	12000	GST excluded
9.2.5(Modulus of elasticity - MINIMUM INDIVIDUAL - Annexure K)	-	12000	GST excluded
9.2.5(Modulus of elasticity - AVERAGE - Annexure K)	-	12000	GST excluded
9.2.5(Modulus of rupture - MINIMUM INDIVIDUAL - Annexure K)	-	12000	GST excluded
9.2.5(Modulus of rupture - AVERAGE - Annexure K)	-	12000	GST excluded
9.2.4(Mycological Test [for MR grade only] - Annexure J)	-	12000	GST excluded
9.2.3(Adhesion of Plies - Annexure H)	-	12000	GST excluded
9.2.2 (Resistance to water - Annexure G, Annexure H [For MR Grade])	-	12000	GST excluded
9.2.2 (Resistance to water - Annexure G, Annexure H [For BWP grade])	-	12000	GST excluded
9.2.1(Dimensional Changes caused by humidity Change in local planeness - Annexure F)	-	12000	GST excluded
9.2.1(Dimensional Changes caused by humidity - Delamination - Annexure F)	-	12000	GST excluded
9.2.1(Dimensional Changes caused by humidity - Change in thickness - at 40% RH - Annexure F)	-	12000	GST excluded
9.2.1(Dimensional Changes caused by humidity - Change in Thickness - at 90% RH - Annexure F)	-	12000	GST excluded
9.2.1(Dimensional Changes caused by humidity - Change in Length - at 40% RH - Annexure F)	-	12000	GST excluded
9.2.1(Dimensional Changes caused by humidity - Change in Length - at 90% RH - Annexure F)	-	12000	GST excluded
7.3(Dimensional Requirements - Variation in thickness - Annexure E)	-	12000	GST excluded
7.3(Dimensional Requirements - Squareness - Annexure D)	-	12000	GST excluded
7.3(Dimensional Requirements - Edge Straightness - Annexure D)	-	12000	GST excluded
7.3(Dimensional Requirements - Thickness - Annexure E)	-	12000	GST excluded
7.3(Dimensional Requirements - Width - 8.1.4)	-	12000	GST excluded
7.3(Dimensional Requirements - Length - 8.1.4)	-	12000	GST excluded
8.1.3, 6.3.3, IS 1328(Visual Inspection - Permissible Defects - IS 1328 [test method for DECORATIVE type])	-	12000	GST excluded
8.1.3, 6.3.3, IS 303(Visual Inspection - Permissible Defects - IS 303 [test method for COMMERCIAL type])	-	12000	GST excluded
9.2.6 (mechanical)(Spot test - Annexure L)	-	12000	GST excluded
cl. 11(marking)	-	12000	GST excluded
cl. 11.1(marking - BIS certification marking)	-	12000	GST excluded
Cl-10(ADDITIONAL REQUIREMENTS FOR ECO-MARK)	-	12000	GST excluded
6.2(Core- Moisture & Width)	-	12000	GST excluded
6.3(Cross Bands and Faces- Moisture content)	-	12000	GST excluded
6.3.1(Thickness of cross band and face veneers)	-	12000	GST excluded

25 Apr, 2028

-
-

IS 710 (2024)

MARINE PLYWOOD - SPECIFICATION (Third Revision)

Plywood

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4.1(Timber)	-	15000	GST excluded
Cl-4.2(Adhesive)	-	15000	GST excluded
Cl-5.1(Veneers)	-	15000	GST excluded
Cl-5.2.1(Glueing)	-	15000	GST excluded
Cl -5.2.2(Thickness of Veneers)	-	15000	GST excluded
Cl - 5.2.3.1(Joint in Veneers)	-	15000	GST excluded
Cl - 5.2.3.2(Edge joints)	-	15000	GST excluded
Cl - 5.2.3.3(End joints)	-	15000	GST excluded
Cl - 5.2.3.4(Scarf joints)	-	15000	GST excluded
Cl - 5.2.4(Grain Direction)	-	15000	GST excluded
Cl-5.3(Treatment)	-	15000	GST excluded
Cl-5.4(Moisture Content)	-	15000	GST excluded
Cl-6.1(Dimensions (length))	-	15000	GST excluded
Cl-6.2(Thickness)	-	15000	GST excluded
Cl-6.3(Squareness)	-	15000	GST excluded
Cl-7.1, 7.2, 7.3, 7.4, 7.5 & 7.6(Workmanship and finish)	-	15000	GST excluded
Cl-9.3(Moisture Content)	-	15000	GST excluded
Cl-9.4.2(Glue Adhesion in Dry State- Adhesion of Plies)	-	15000	GST excluded
Cl-9.4.1(Glue Adhesion in Dry State- Glue Shear Strength -Average)	-	15000	GST excluded
Cl-9.5.1.1(Glue Adhesion in Water Resistance - Glue Shear Strength -Average)	-	15000	GST excluded
Cl-9.5.1.2(Water Resistance Test-Adhesion of plies)	-	15000	GST excluded
Cl-9.5.2(Water Resistance Test)	-	15000	GST excluded
Cl-9.6(Tensile Strength-Along the grain)	-	15000	GST excluded
Cl-9.7(Mycological Test -Adhesion)	-	15000	GST excluded
Cl-9.8, Table-2(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-	15000	GST excluded
Cl-9.8, Table-2(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-	15000	GST excluded
Cl-9.9, Table-3 (i) a(Wet Bending Strength- Modulus of Elasticity (MOE)- Average)	-	15000	GST excluded
Cl-9.9, Table-3 (i) b(Wet Bending Strength- Modulus of Elasticity (MOE),-Minimum individual)	-	15000	GST excluded
Cl-9.10(Retention of Preservative)	-	15000	GST excluded
Cl-9.11(Formaldehyde Content Test)	-	15000	GST excluded
Cl-9.12(Steady-State Formaldehyde Emission Test)	-	15000	GST excluded
Cl-9.4.2(Adhesion of Plies)	-	15000	GST excluded
5.1.1(Defects in veneers)	-	15000	GST excluded

25 Apr, 2028

-
Exclusion: Cl-9.12 (Steady-State Formaldehyde Emission Test)

IS 4990 (2024)

PLYWOOD FOR CONCRETE SHUTTERING WORKS SPECIFICATION (Fourth Revision)

PLYWOOD FOR CONCRETE SHUTTERING

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5.1(Timber)	-	25000	GST excluded
Cl-5.2(Adhesives for Bonding of Veneers)	-	25000	GST excluded
Cl-6.1(Manufacture)	-	25000	GST excluded
Cl-6.2(Manufacture ( Thickness of veneers))	-	25000	GST excluded
Cl-6.3(Manufacture ( Physical and mechanical properties of veneers))	-	25000	GST excluded
Cl-6.4, 6.7(Manufacture (Plywood for concrete shuttering))	-	25000	GST excluded
Cl-6.5(Manufacture (Scarf joints))	-	25000	GST excluded
Cl-6.6(Manufacture ( Preservative treatment))	-	25000	GST excluded
Cl-7.1(Dimensions -length)	-	25000	GST excluded
Cl-7.2(Thickness)	-	25000	GST excluded
Cl-7.3(Squareness)	-	25000	GST excluded
Cl-8.1, 8.2(Workmanship and finish)	-	25000	GST excluded
Cl-10.3(Moisture Content)	-	25000	GST excluded
Cl-10.4.1(Glue Adhesion in Dry State - Glue Shear Strength)	-	25000	GST excluded
Cl-10.4.2(Glue Adhesion in Dry State - Adhesion of Plies)	-	25000	GST excluded
Cl-10.5, 10.5.1(Resistance to Water Test)	-	25000	GST excluded
Cl-10.5.1.1(Water Resistance Test-Glue shear strength)	-	25000	GST excluded
Cl-10.5.1.2(Water Resistance Test-Adhesion of plies)	-	25000	GST excluded
Cl-10.5.2(Water Resistance Test (Alternate method))	-	25000	GST excluded
Cl-10.6(Water resistance test (Concrete shuttering Plywood))	-	25000	GST excluded
Cl-10.7.1, Table-2(Mycological Test- Glue shear strengt)	-	25000	GST excluded
Cl-10.7.2(Mycological Test- Adhesion of plies)	-	25000	GST excluded
Cl-10.8(Tensile Strength)	-	25000	GST excluded
Cl-10.9, Table-3 (i)(Along (parallel to the grain direction of the face veneer))	-	25000	GST excluded
Cl-10.9, Table-3 (ii)(Across (perpendicular to the grain direction of the face veneer))	-	25000	GST excluded
Cl-10.10, Table-4 (i) a(Wet Bending Strength -Modulus of Elasticity (MOE),- Average)	-	25000	GST excluded
Cl-10.10, Table-4 (i) b(Wet Bending Strength - Modulus of Elasticity (MOE),- Minimum individual)	-	25000	GST excluded
Cl-10.11(Retention of Preservative)	-	25000	GST excluded
Cl-10.12(Formaldehyde Content Test)	-	25000	GST excluded
Cl-10.13(Steady-State Formaldehyde Emission Test)	-	25000	GST excluded

25 Apr, 2028

-
Exclusion: Cl-10.13 (Steady-State Formaldehyde Emission Test)

IS 303 (2024)

Plywood for General Purposes â Specification (Fourth Revision)

Plywood

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5.1(Classification by appearance)	-	15000	GST excluded
Cl-5.2, Table- 1 (i)(Blister)	-	15000	GST excluded
Cl-5.2, Table- 1 (ii)(Checks)	-	15000	GST excluded
Cl-5.2, Table- 1 (iii)(Discolouration)	-	15000	GST excluded
Cl-5.2, Table- 1 (iv)(Dote)	-	15000	GST excluded
Cl-5.2, Table- 1 (v)(Insect hole)	-	15000	GST excluded
Cl-5.2, Table- 1 (vi)(Joints)	-	15000	GST excluded
Cl-5.2, Table- 1 (vii)(Knots (dead))	-	15000	GST excluded
Cl-5.2, Table- 1 (viii)(Pin knots (dead))	-	15000	GST excluded
Cl-5.2, Table- 1 (ix)(Pin knots (live))	-	15000	GST excluded
Cl-5.2, Table- 1 (x)(Knots (tight))	-	15000	GST excluded
Cl-5.2, Table- 1 (xi)(Patches)	-	15000	GST excluded
Cl-5.2, Table- 1 (xii)(Splits)	-	15000	GST excluded
Cl-5.2, Table- 1 (xiii)(Swirl)	-	15000	GST excluded
Cl-5.2, Table-2(Maximum Number of Categories of Permissible Defects, per m2)	-	15000	GST excluded
Cl-6.1(Timber)	-	15000	GST excluded
Cl-6.2(Adhesive)	-	15000	GST excluded
Cl-7.2.1(Thickness of veneers)	-	15000	GST excluded
Cl-7.2.3(Grain Direction)	-	15000	GST excluded
Cl-7.2.5.1(Gaps in cores and cross-bands)	-	15000	GST excluded
Cl-7.2.5.2(Splits)	-	15000	GST excluded
Cl-7.2.5.3(Overlap)	-	15000	GST excluded
Cl-8.1(Dimensions -length)	-	15000	GST excluded
Cl-8.2(Thickness of the plywood boards)	-	15000	GST excluded
Cl-8.3(Squareness)	-	15000	GST excluded
Cl-11.3.1, 11.3.1.1(Water Resistance Test)	-	15000	GST excluded
Cl-11.3.2(Mycological Test)	-	15000	GST excluded
Cl-11.4(Moisture Content)	-	15000	GST excluded
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-	15000	GST excluded
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-	15000	GST excluded
Cl-11.6(Formaldehyde Content Test)	-	15000	GST excluded
Cl-11.7(Steady-State Formaldehyde Emission Test)	-	15000	GST excluded
Cl-9(WORKMANSHIP AND FINISH)	-	15000	GST excluded
Cl-7.2.4(Scarf Joints)	-	15000	GST excluded

25 Apr, 2028

-
Exclusion: Cl-11.7 (Steady-State Formaldehyde Emission Test)

Bureau of Indian Standards

The National Standards Body of India

ALPHA TEST HOUSE SERVICES LLP (Unit-1)

PLOT NO. 124, INDUSTRIAL AREA, PHASE - 9, Mohali, S.A.S Nagar, Punjab, 160062

8288094215 alphatesthousellp@gmail.com

Scope List