BIS - LIMS (Laboratory Information Management System)

ALPHA TEST HOUSE SERVICES LLP (Unit-1), MOHALI

PLOT NO. 124, INDUSTRIAL AREA, PHASE - 9, Mohali, S.A.S Nagar, Punjab, 160062

8288094215 alphatesthousellp@gmail.com

Scope List

Reset

37 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

IS 14587 (2023)

Prelaminated Medium Density Fibre Board - Specification

Plelaminated MDF Board

35000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5.1(Medium Density Fibre (MDF) Board)	-	35000	GST excluded
Cl-7(Finish)	-	35000	GST excluded
Cl-8.1(Dimensions of prelaminated MDF)	-	35000	GST excluded
Cl-8.2(Tolerances)	-	35000	GST excluded
Cl-8.2.1(Edge straightness)	-	35000	GST excluded
Cl-9.1 S.No-(1), i(Density, kg/m3)	-	35000	GST excluded
Cl-9.1 S.No-(1), ii(Variation from mean density, percent)	-	35000	GST excluded
Cl-9.1 S.No-(1), iii(Moisture content, percent)	-	35000	GST excluded
Cl-9.1 S.No-(1), iv(Variation from mean moisture content, percent (absolute))	-	35000	GST excluded
Cl-9.1 S.No-(1), v(Linear expansion (thickness swelling in water), due to general absorption after 24 h soaking, percent, Max)	-	35000	GST excluded
Cl-9.1 S.No-(1), vi(Internal bond strength, N/mm2, Min)	-	35000	GST excluded
Cl-9.1 S.No-(1), vii,a(After cyclic test)	-	35000	GST excluded
Cl-9.1 S.No-(1), vii,b(After accelerated water resistance test)	-	35000	GST excluded
Cl-9.1 S.No-(1), viii(Modulus of rupture, N/mm2 , Min)	-	35000	GST excluded
Cl-9.1 S.No-(1), ix(Modulus of elasticity, N/mm2 , Min)	-	35000	GST excluded
Cl-9.1 S.No-(1), x,(Screw withdrawal strength, ????????, Min)	-	35000	GST excluded
Cl-9.1 S.No-(1), xi(Formaldehyde content (Fc), mg/100 g for oven dry board)	-	35000	GST excluded
Cl-9.1 S.No-(1), xii(Steady-state formaldehyde emission (Fc), mg/m3)	-	35000	GST excluded
Cl-9.1 S.No-(1), xiii(Abrasion resistance in number of revolutions, Min, (Type 1 to 4))	-	35000	GST excluded
Cl-9.1 S.No-(1), xiv(Resistance to steam/water vapours)	-	35000	GST excluded
Cl-9.1 S.No-(1), xv(Resistance to crack)	-	35000	GST excluded
Cl-9.1 S.No-(1), xvi(Resistance to a cigarette burn)	-	35000	GST excluded
Cl-9.1 S.No-(1), xvii(Resistance to stain)	-	35000	GST excluded
Cl-11.2(Specific Requirement)	-	35000	GST excluded
Cl-12(Marking)	-	35000	GST excluded
Cl-5.2(Impregnated Base Paper)	-	35000	GST excluded
Cl-5.3(Impregnated Overlay)	-	35000	GST excluded

25 Apr, 2028

-
Exclusions: Cl-9.1 S.No-(1), xii (Steady-state formaldehyde emission (Fc), mg/m3)

IS 12406 (2021)

Medium density fibre boards for general purpose - Specification

MDF Boards

18000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clauses 5.2, 9 and 10.2.2(Density)	-	18000	GST excluded
Clauses 5.2, 9 and 10.2.2(Density)	-	18000	GST excluded
Clauses 5.2, 9 and 10.2.2(Variation from mean density)	-	18000	GST excluded
Clauses 5.2, 9 and 10.2.2(Moisture Content)	-	18000	GST excluded
Clauses 5.2, 9 and 10.2.2(Variation from mean moisture content)	-	18000	GST excluded
Clauses 5.2, 9 and 10.2.2(Linear expansion (Thickness Swelling in Water) Due to general Absorption after 24h soaking)	-	18000	GST excluded
Clauses 5.2, 9 and 10.2.2(Internal Bond Strength)	-	18000	GST excluded
Clauses 5.2, 9 and 10.2.2(Internal Bond strength (i) (After Cyclic test) (ii) (After accelerated water resistance test))	-	18000	GST excluded
Clauses 5.2, 9 and 10.2.2(Modulus of Rupture a) Avg. Value b) Min. Individual)	-	18000	GST excluded
Clauses 5.2, 9 and 10.2.2(Modulus of Elasticity a) Avg. Value b) Min. Individual)	-	18000	GST excluded
Clauses 5.2, 9 and 10.2.2(Screw withdrawl strength (i) Face (ii) Edge (For thickness >12mm))	-	18000	GST excluded
Clauses 5.2, 9 and 10.2.2(Formaldehyde Content (i) For Formaldehyde Class, E1 (ii) For Formaldehyde Class, E2)	-	18000	GST excluded
Clauses 5.2, 9 and 10.2.2(Steady State Formaldehyde emission (Fc (i) For Formaldehyde Class, E1 (ii) For Formaldehyde Class, E2)	-	18000	GST excluded
8(DIMENSIONS AND TOLERANCES)	-	18000	GST excluded
Cl-11(ADDITIONAL REQUIREMENTS FOR ECO-MARK)	-	18000	GST excluded
Cl 7(Finish)	-	18000	GST excluded

25 Apr, 2028

-
Exclusion: Clauses 5.2, 9 and 10.2.2 Steady-state Formaldehyde emission

IS 2202 : Part 2 (2022)

WOODEN FLUSH DOOR SHUTTERS SOLID CORE TYPE SPECIFICATION PART 2 PARTICLE BOARD HIGH DENSITY FIBRE BOARD MEDIUM DENSITY FIBRE BOARD AND HARDBOARD FACE PANELS Fourth Revision

Wooden Flush Door Shutters

30000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause No - 6.1(Timber)	-	30000	GST excluded
Clause No -6.2(Alternative Materials (LVL)	-	30000	GST excluded
Clause No -6.2(Alternative Materials veneer laminated lumber (VLL))	-	30000	GST excluded
Clause No -6.2(Alternative Materials medium density fibre board (MDF))	-	30000	GST excluded
Clause No -6.2(Alternative Materials -plywood)	-	30000	GST excluded
Clause No -6.2(BWP grade flush door shutter)	-	30000	GST excluded
Clause No -6.3.1("Face Panels: Particle Board MDF/ HDF Fibre Hardboard")	-	30000	GST excluded
Clause No -6.4(Adhesive)	-	30000	GST excluded
Clause No -7.1(Construction)	-	30000	GST excluded
Clause No - 7.3(" MDF board or HDF board ")	-	30000	GST excluded
Clause No -9.2("Workmanship and finish")	-	30000	GST excluded
Clause No -10.1(tests for flush door shutters)	-	30000	GST excluded
Clause No -10.2(End Immersion Test)	-	30000	GST excluded
Clause No -10.3(Glue Adhesion Test)	-	30000	GST excluded
Clause No -11(SAMPLING AND CRITERIA FOR CONFORMITY)	-	30000	GST excluded
Clause No -12("ADDITIONAL REQUIREMENTS FOR ECO MARK")	-	30000	GST excluded
5(SIZES AND TOLERANCES)	-	30000	-
6.5(The swelling in thickness of the particle board, MDF and HDF board for core)	-	30000	-
Cl-6.3.3 (Amendment NO 1)(B D P V, P D P V and M D P V types of flush door)	-	30000	GST excluded
Cl-6.3.2(MDF board and HDF board)	-	30000	GST excluded
Cl-6.3.4(B N P V, P N P V and M N P V,)	-	30000	GST excluded
Cl-7.2(Face Panel)	-	30000	GST excluded
Cl-7.4 (Amendment No 1)(Door Blanks)	-	30000	GST excluded
Cl-8(Fittings)	-	30000	GST excluded

25 Apr, 2028

-
-

IS 1659 (2004)

Block boards - Specification (Fourth Revision)

Block Boards

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
9.2.6(Spot test - Annexure L)	-	12000	GST excluded
9.2.5(Modulus of elasticity - MINIMUM INDIVIDUAL - Annexure K)	-	12000	GST excluded
9.2.5(Modulus of elasticity - AVERAGE - Annexure K)	-	12000	GST excluded
9.2.5(Modulus of rupture - MINIMUM INDIVIDUAL - Annexure K)	-	12000	GST excluded
9.2.5(Modulus of rupture - AVERAGE - Annexure K)	-	12000	GST excluded
9.2.4(Mycological Test [for MR grade only] - Annexure J)	-	12000	GST excluded
9.2.3(Adhesion of Plies - Annexure H)	-	12000	GST excluded
9.2.2 (Resistance to water - Annexure G, Annexure H [For MR Grade])	-	12000	GST excluded
9.2.2 (Resistance to water - Annexure G, Annexure H [For BWP grade])	-	12000	GST excluded
9.2.1(Dimensional Changes caused by humidity Change in local planeness - Annexure F)	-	12000	GST excluded
9.2.1(Dimensional Changes caused by humidity - Delamination - Annexure F)	-	12000	GST excluded
9.2.1(Dimensional Changes caused by humidity - Change in thickness - at 40% RH - Annexure F)	-	12000	GST excluded
9.2.1(Dimensional Changes caused by humidity - Change in Thickness - at 90% RH - Annexure F)	-	12000	GST excluded
9.2.1(Dimensional Changes caused by humidity - Change in Length - at 40% RH - Annexure F)	-	12000	GST excluded
9.2.1(Dimensional Changes caused by humidity - Change in Length - at 90% RH - Annexure F)	-	12000	GST excluded
7.3(Dimensional Requirements - Variation in thickness - Annexure E)	-	12000	GST excluded
7.3(Dimensional Requirements - Squareness - Annexure D)	-	12000	GST excluded
7.3(Dimensional Requirements - Edge Straightness - Annexure D)	-	12000	GST excluded
7.3(Dimensional Requirements - Thickness - Annexure E)	-	12000	GST excluded
7.3(Dimensional Requirements - Width - 8.1.4)	-	12000	GST excluded
7.3(Dimensional Requirements - Length - 8.1.4)	-	12000	GST excluded
8.1.3, 6.3.3, IS 1328(Visual Inspection - Permissible Defects - IS 1328 [test method for DECORATIVE type])	-	12000	GST excluded
8.1.3, 6.3.3, IS 303(Visual Inspection - Permissible Defects - IS 303 [test method for COMMERCIAL type])	-	12000	GST excluded
9.2.6 (mechanical)(Spot test - Annexure L)	-	12000	GST excluded
cl. 11(marking)	-	12000	GST excluded
cl. 11.1(marking - BIS certification marking)	-	12000	GST excluded
Cl-10(ADDITIONAL REQUIREMENTS FOR ECO-MARK)	-	12000	GST excluded
6.2(Core- Moisture & Width)	-	12000	GST excluded
6.3(Cross Bands and Faces- Moisture content)	-	12000	GST excluded
6.3.1(Thickness of cross band and face veneers)	-	12000	GST excluded

25 Apr, 2028

-
-

IS 710 (2024)

MARINE PLYWOOD - SPECIFICATION (Third Revision)

Plywood

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4.1(Timber)	-	15000	GST excluded
Cl-4.2(Adhesive)	-	15000	GST excluded
Cl-5.1(Veneers)	-	15000	GST excluded
Cl-5.2.1(Glueing)	-	15000	GST excluded
Cl -5.2.2(Thickness of Veneers)	-	15000	GST excluded
Cl - 5.2.3.1(Joint in Veneers)	-	15000	GST excluded
Cl - 5.2.3.2(Edge joints)	-	15000	GST excluded
Cl - 5.2.3.3(End joints)	-	15000	GST excluded
Cl - 5.2.3.4(Scarf joints)	-	15000	GST excluded
Cl - 5.2.4(Grain Direction)	-	15000	GST excluded
Cl-5.3(Treatment)	-	15000	GST excluded
Cl-5.4(Moisture Content)	-	15000	GST excluded
Cl-6.1(Dimensions (length))	-	15000	GST excluded
Cl-6.2(Thickness)	-	15000	GST excluded
Cl-6.3(Squareness)	-	15000	GST excluded
Cl-7.1, 7.2, 7.3, 7.4, 7.5 & 7.6(Workmanship and finish)	-	15000	GST excluded
Cl-9.3(Moisture Content)	-	15000	GST excluded
Cl-9.4.2(Glue Adhesion in Dry State- Adhesion of Plies)	-	15000	GST excluded
Cl-9.4.1(Glue Adhesion in Dry State- Glue Shear Strength -Average)	-	15000	GST excluded
Cl-9.5.1.1(Glue Adhesion in Water Resistance - Glue Shear Strength -Average)	-	15000	GST excluded
Cl-9.5.1.2(Water Resistance Test-Adhesion of plies)	-	15000	GST excluded
Cl-9.5.2(Water Resistance Test)	-	15000	GST excluded
Cl-9.6(Tensile Strength-Along the grain)	-	15000	GST excluded
Cl-9.7(Mycological Test -Adhesion)	-	15000	GST excluded
Cl-9.8, Table-2(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-	15000	GST excluded
Cl-9.8, Table-2(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-	15000	GST excluded
Cl-9.9, Table-3 (i) a((Modulus of Elasticity: Across the Face Grain: Average) Wet Bending)	-	15000	GST excluded
Cl-9.9, Table-3 (i) b((Modulus of Elasticity: Across the Face Grain: Minimum Individual) Wet Bending)	-	15000	GST excluded
Cl-9.10(Retention of Preservative)	-	15000	GST excluded
Cl-9.11(Formaldehyde Content Test)	-	15000	GST excluded
Cl-9.12(Steady-State Formaldehyde Emission Test)	-	15000	GST excluded
Cl-9.4.2(Adhesion of Plies)	-	15000	GST excluded
5.1.1(Defects in veneers)	-	15000	GST excluded

25 Apr, 2028

-
Exclusion: Cl-9.12 (Steady-State Formaldehyde Emission Test)

IS 4990 (2024)

PLYWOOD FOR CONCRETE SHUTTERING WORKS SPECIFICATION (Fourth Revision)

PLYWOOD FOR CONCRETE SHUTTERING

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5.1(Timber)	-	25000	GST excluded
Cl-5.2(Adhesives for Bonding of Veneers)	-	25000	GST excluded
Cl-6.1(Manufacture)	-	25000	GST excluded
Cl-6.2(Manufacture ( Thickness of veneers))	-	25000	GST excluded
Cl-6.3(Manufacture ( Physical and mechanical properties of veneers))	-	25000	GST excluded
Cl-6.4, 6.7(Manufacture (Plywood for concrete shuttering))	-	25000	GST excluded
Cl-6.5(Manufacture (Scarf joints))	-	25000	GST excluded
Cl-6.6(Manufacture ( Preservative treatment))	-	25000	GST excluded
Cl-7.1(Dimensions -length)	-	25000	GST excluded
Cl-7.2(Thickness)	-	25000	GST excluded
Cl-7.3(Squareness)	-	25000	GST excluded
Cl-8.1, 8.2(Workmanship and finish)	-	25000	GST excluded
Cl-10.3(Moisture Content)	-	25000	GST excluded
Cl-10.4.1(Glue Adhesion in Dry State - Glue Shear Strength-WOOD FAILURE, Average)	-	25000	GST excluded
Cl-10.4.2(Glue Adhesion in Dry State - Adhesion of Plies)	-	25000	GST excluded
Cl-10.5, 10.5.1(Resistance to water test- glue shear strength- WOOD Failure, Average)	-	25000	GST excluded
Cl-10.5.1.1(Water Resistance Test-Glue shear strength)	-	25000	GST excluded
Cl-10.5.1.2(Water Resistance Test-Adhesion of plies)	-	25000	GST excluded
Cl-10.5.2(Water Resistance Test (Alternate method))	-	25000	GST excluded
Cl-10.6(Water resistance test (Concrete shuttering Plywood))	-	25000	GST excluded
Cl-10.7.1, Table-2(Mycological Test- Glue shear strengt)	-	25000	GST excluded
Cl-10.7.2(Mycological Test- Adhesion of plies)	-	25000	GST excluded
Cl-10.8(Tensile Strength)	-	25000	GST excluded
Cl-10.9, Table-3 (i)(Along (parallel to the grain direction of the face veneer))	-	25000	GST excluded
Cl-10.9, Table-3 (ii)(Across (perpendicular to the grain direction of the face veneer))	-	25000	GST excluded
Cl-10.10, Table-4 (i) a((Modulus of Elasticity: Across the Face Grain: Average) Wet Bending)	-	25000	GST excluded
Cl-10.10, Table-4 (i) b((Modulus of Rupture: Across the Face Grain: Minimum Individual) Wet Bending)	-	25000	GST excluded
Cl-10.11(Retention of Preservative)	-	25000	GST excluded
Cl-10.12(Formaldehyde Content Test)	-	25000	GST excluded
Cl-10.13(Steady-State Formaldehyde Emission Test)	-	25000	GST excluded

25 Apr, 2028

-
Exclusion: Cl-10.13 (Steady-State Formaldehyde Emission Test)

IS 303 (2024)

Plywood for General Purposes â Specification (Fourth Revision)

Plywood

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5.1(Classification by appearance)	-	15000	GST excluded
Cl-5.2, Table- 1 (i)(Blister)	-	15000	GST excluded
Cl-5.2, Table- 1 (ii)(Checks)	-	15000	GST excluded
Cl-5.2, Table- 1 (iii)(Discolouration)	-	15000	GST excluded
Cl-5.2, Table- 1 (iv)(Dote)	-	15000	GST excluded
Cl-5.2, Table- 1 (v)(Insect hole)	-	15000	GST excluded
Cl-5.2, Table- 1 (vi)(Joints)	-	15000	GST excluded
Cl-5.2, Table- 1 (vii)(Knots (dead))	-	15000	GST excluded
Cl-5.2, Table- 1 (viii)(Pin knots (dead))	-	15000	GST excluded
Cl-5.2, Table- 1 (ix)(Pin knots (live))	-	15000	GST excluded
Cl-5.2, Table- 1 (x)(Knots (tight))	-	15000	GST excluded
Cl-5.2, Table- 1 (xi)(Patches)	-	15000	GST excluded
Cl-5.2, Table- 1 (xii)(Splits)	-	15000	GST excluded
Cl-5.2, Table- 1 (xiii)(Swirl)	-	15000	GST excluded
Cl-5.2, Table-2(Maximum Number of Categories of Permissible Defects, per m2)	-	15000	GST excluded
Cl-6.1(Timber)	-	15000	GST excluded
Cl-6.2(Adhesive)	-	15000	GST excluded
Cl-7.2.1(Thickness of veneers)	-	15000	GST excluded
Cl-7.2.3(Grain Direction)	-	15000	GST excluded
Cl-7.2.5.1(Gaps in cores and cross-bands)	-	15000	GST excluded
Cl-7.2.5.2(Splits)	-	15000	GST excluded
Cl-7.2.5.3(Overlap)	-	15000	GST excluded
Cl-8.1(Dimensions -length)	-	15000	GST excluded
Cl-8.2(Thickness of the plywood boards)	-	15000	GST excluded
Cl-8.3(Squareness)	-	15000	GST excluded
Cl-11.3.1, 11.3.1.1(Water Resistance Test)	-	15000	GST excluded
Cl-11.3.2(Mycological Test)	-	15000	GST excluded
Cl-11.4(Moisture Content)	-	15000	GST excluded
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-	15000	GST excluded
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-	15000	GST excluded
Cl-11.6(Formaldehyde Content Test)	-	15000	GST excluded
Cl-11.7(Steady-State Formaldehyde Emission Test)	-	15000	GST excluded
Cl-9(WORKMANSHIP AND FINISH)	-	15000	GST excluded
Cl-7.2.4(Scarf Joints)	-	15000	GST excluded

25 Apr, 2028

-
Exclusion: Cl-11.7 (Steady-State Formaldehyde Emission Test)

Bureau of Indian Standards

The National Standards Body of India

ALPHA TEST HOUSE SERVICES LLP (Unit-1), MOHALI

PLOT NO. 124, INDUSTRIAL AREA, PHASE - 9, Mohali, S.A.S Nagar, Punjab, 160062

8288094215 alphatesthousellp@gmail.com

Scope List