BIS - LIMS (Laboratory Information Management System)

Samridhi Test House Pvt. Ltd.

KH.NO. 45/23/1 GROUND FLOOR, VILLAGE & POST OFFICE VILLAGE PRAHALADPUR, North Delhi, NEW DELHI, North West, Delhi, 110042

9870394724 info@samridhitesthouse.com

Scope List

Reset

76 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

IS 5382 (2025)

RUBBER SEALS JOINT RINGS FOR WATER SUPPLY DRAINAGE AND SEWERAGE PIPELINES SPECIFICATION FOR MATERIALS ( Third Revision )

All Grade / Type / Size / Designation

50000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5.1(General requirement)	-	1000	-
Cl-5.2(Effect on water quality)	-	1000	-
Cl-5.3(Microbiological deterioration)	-	1000	-
Cl-5.4(Dimensional tolerances)	-	1000	-
Cl-5.5(Imperfections and defects)	-	500	-
Cl-5.6(Hardness)	-	1000	-
Cl-5.7(Tensile strength and elongation at break)	-	2500	-
Cl-5.8.1(Compression set in air-General)	-	2500	-
Cl-5.8.2(Compression set in air-Compression set at 23 °C and 70 °C.)	-	2500	-
Cl-5.8.3(Compression set in air-Low-temperature compression set at 72–10 °C)	-	2500	-
Cl-5.9(Accelerated ageing in air-7 days at 70 °C.)	-	2500	-
Cl-5.9(Hardness change, max./min.)	-	1000	-
Cl-5.9(Tensile-strength change, max)	-	2500	-
Cl-5.9(Elongation change, max./min)	-	1000	-
Cl-5.10(Stress relaxation in compression-7 days at 23 °C)	-	3000	-
Cl-5.10(Stress relaxation in compression-100 days at 23 °C)	-	3000	-
Cl-5.11(Volume change in water max./ min. 7 days at 70 °C)	-	1000	-
Cl-5.12(Ozone resistance)	-	2500	-
Cl-5.13.1(Spliced joints)	-	1000	-
Cl-5.13.2(Strength of spliced joints)	-	1000	-
Cl-6.1(Low temperature performance at –25 °C, (type L))	-	2500	-
Cl-6.1(Compression set, max. 72 h at −25 °C)	-	2500	-
Cl-6.1(Hardness change, max 168 h at −25 °C)	-	2500	-
Cl-6.2(Volume change in oil, max./min. 72 h at 70 °C (type O))	-	2500	-
Cl-6.3(Lifetime estimation, (type LT).)	-	1000	-
Cl-6.4(Summary of optional property requirements)	-	1000	-
Cl-11(Marking and labelling)	-	500	-

09 Apr, 2028

-
Included w.e.f. 02.03.2026

IS 4151 (2015)

Protective helmets for motorcycle riders - Specification

14000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Shell)	-	100	-
4.5(Metal Parts)	-	800	-
4.6(Visor)	-	0	-
6.1(General)	-	100	-
6.2(Shell)	-	100	-
6.3(Protactive Padding)	-	200	-
6.4(Retention System)	-	300	-
6.7(Peripheral Vision)	-	500	-
6.8(Workmanship and Finish)	-	300	-
7.0(Tests for Helmets)	-	10600	-
7.2(Impact Absorption Test)	-	1500	-
7.3(Rigidity Test)	-	500	-
7.4(Projections and Surface Friction Test)	-	1500	-
7.5(Dynamic Test of Retention System)	-	500	-
7.6(Audibility Test)	-	900	-
7.5(Tests for Helmets)	-	0	Repeated Test
7.4(Tests for Helmets)	-	0	Repeated Test
7.3(Tests for Helmets)	-	0	Repeated Test
7.2(Tests for Helmets)	-	0	Repeated Test
7(Tests for Helmets)	-	0	Repeated Test
6.8(Workmanship and Finish)	-	0	Repeated Test
6.7(Constructional Requirements)	-	0	Repeated Test
6.4(Constructional Requirements)	-	0	Repeated Test
6.3(Constructional Requirements)	-	0	Repeated Test
6.2(Constructional Requirements)	-	0	Repeated Test
6.1(Constructional Requirements)	-	0	Repeated Test
5(Size)	-	100	-
4.6(Material)	-	0	Repeated Test
4.5(Material)	-	0	Repeated Test
4.1(Material)	-	0	Repeated Test
7.7(Retention Test of Helmet)	-	1000	-
7.8(Micro-Slip Test of the Chin Strap)	-	1000	-
7.9(Test for Resistance to Abrasion of the Chin Strap )	-	1000	-
7.10.1(Inadvertent Release by Pressure)	-	1000	-
7.10.2(Ease of Release)	-	500	-
7.10.3(Tests for Helmets)	-	1200	-
7.10.2(Tests for Helmets)	-	0	Repeated Test
7.10.1(Tests for Helmets)	-	0	Repeated Test
7.9(Tests for Helmets)	-	0	Repeated Test
7.7(Tests for Helmets)	-	0	Repeated Test
7.6(Tests for Helmets)	-	0	Repeated Test
7.10.3(Durability of Quick Release Mechanism)	-	0	Repeated Test
7.8(Tests for Helmets)	-	0	Repeated Test

09 Apr, 2028

-
-

IS 15778 (2007)

Chlorinated polyvinyl chloride (Cpvc) pipes for potable hot and cold water distribution supplies - Specification

All Grade / Type / Size / Designation

90000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5 Table 1(Classification of pipes)	-	1000	-
6.2.1 Annex B(Chloride Content of Resin)	-	2500	-
6.3(Compound Properties)	-	2500	-
6.3.1 Annex B(Chloride content)	-	2500	-
6.3.2 Annex C(Verification of the Malfunction Temperature, Tmal: )	-	15000	-
6.3.2 IS 13360 (Part 3/See 1)(Density)	-	5000	-
7.1 IS 12235 (Part 1) Table 2(Dimension of Pipes: Mean outside Diameter)	-	2000	-
7.1,7.1.1 IS 12235 (Part 1) Table 2(Outside Diameter at any point)	-	2000	-
7.1.2 IS 12235 (Part 1) Table 2(Wall Thickness )	-	2000	-
7.1.3 (Effective length)	-	2000	-
8(Pipe Ends)	-	500	-
9(PHYSICAL AND CHEMICAL CHARACTERISTICS)	-	500	-
9.1(Visual Appearance)	-	500	-
9.1(Visual Appearance)	-	500	-
9.2 IS 12235 (Part 3)(Opacity)	-	1000	-
Cl. 9.3,IS 4985 Cl. 10.3(Lead (first extraction))	-	2000	-
Cl. 9.3,IS 4985 Cl. 10.3(Lead (third extraction))	-	2000	-
Cl. 9.3,IS 4985 Cl. 10.3(Dialkyl tin C4 and higher homologues measured as tin (third extraction))	-	2000	-
Cl. 9.3,IS 4985 Cl. 10.3(Cadmium (for all three extracts) )	-	2000	-
10.1 Table 3 IS 12235 (Part 8/Sec 1)(Hydrostatic Characteristics)	-	35000	-
10.1 Table 3 IS 12235 (Part 8/Sec 1)(Hydrostatic Characteristics)	-	35000	-
10.1 Table 3 IS 12235 (Part 8/Sec 1)(Hydrostatic Characteristics)	-	35000	-
10.2 Table 3 IS 12235 (Part 8/Sec 1)(Thermal Stability by Hydrostatic Pressure Testing)	-	35000	-
10.3 IS 4985 Table 4(Resistance to External Blow at O°C: When tested by the method prescribed in IS 4985, with classified striker mass and drop height as given in Table 4, the pipe shall have a true impact rate of not more than 10 percent.)	-	5000	-
10.4 IS 12235(Part 19)(Flattening Test)	-	5000	-
10.5 IS 12235(Part 13)(Tensile Strength : When tested by the method prescribed in IS 12235(Part 13), the tensile strength at yield shall not be less than 50 MPaat 27±2°C. )	-	5000	-
5 Table 1(Classification of pipes)	-	1000	-
6.2.1 Annex B(Chloride Content of Resin)	-	0	-
6.3(Compound Properties)	-	0	-
6.3.1 Annex B(Chloride content)	-	0	-
6.3.2 Annex C(Verification of the Malfunction Temperature, Tmal: )	-	0	-
6.3.2 IS 13360 (Part 3/See 1)(Density)	-	0	-
7.1 IS 12235 (Part 1) Table 2(Dimension of Pipes: Mean outside Diameter)	-	0	-
7.1,7.1.1 IS 12235 (Part 1)Table 2(Outside Diameter at any point (Minimum))	-	0	-
7.1.2 IS 12235 (Part 1)Table 2(Wall Thickness (Minimum))	-	0	-
7.1.3 (Effective length)	-	0	-
8.0(Pipe Ends)	-	0	-
9.0(PHYSICAL AND 1CHARACTERISTICS)	-	0	-
9.1(Visual Appearance)	-	0	-
9.1(Visual Appearance)	-	0	-
9.2 IS 12235 (Part 3)(Opacity)	-	0	-
9.4 IS 12235(Part 5/Sec 1 and Sec 2)(Reversion Test : When tested by the method prescribed in IS 12235(Part 5/Sec 1 and Sec 2), a length of pipe 200 + 20 mm long shall not alter in length by more than 5 percent.)	-	0	-
9.5 IS 12235(Part 2)(Vicat Softening Temperature: When tested by the method prescribed in IS 12235(Part 2), the Vicat softening temperature of the specimen shall not be less than 110°C.)	-	0	-
9.6 IS 12235(Part 14)(Density)	-	0	-
10.0(Mechanical Properties)	-	0	-
10.1 Table 3 IS 12235 (Part 8/Sec 1)(Hydrostatic Characteristics)	-	0	-
10.1 Table 3 IS 12235 (Part 8/Sec 1)(Hydrostatic Characteristics)	-	0	-
10.1 Table 3 IS 12235 (Part 8/Sec 1)(Hydrostatic Characteristics)	-	0	-
10.2 Table 3 IS 12235 (Part 8/Sec 1)(Thermal Stability by Hydrostatic Pressure Testing)	-	0	-
10.3 IS 4985 Table 4(Resistance to External Blow at O°C: When tested by the method prescribed in IS 4985, with classified striker mass and drop height as given in Table 4, the pipe shall have a true impact rate of not more than 10 percent.)	-	0	-
10.4 IS 12235(Part 19)(Flattening Test)	-	0	-
10.5 IS 12235(Part 13)(Tensile Strength : When tested by the method prescribed in IS 12235(Part 13), the tensile strength at yield shall not be less than 50 MPaat 27±2°C. )	-	0	-
7.1.2(Wall Thickness (Maximum))	-	0	-
7.1.1(Outside Diameter at any point (Maximum))	-	0	-
6.3(K value Test)	-	1000	-
6.3.3(Density)	-	0	-
Cl. 9.3,IS 4985 Cl. 10.3(Mercury (for all three extracts) )	-	0	-
Cl. 9.3,IS 4985 Cl. 10.3(Other toxic substances including di-n-octyl-tin- s-s bis iso-octyl mercapto acetate' and 'butyl stearate')	-	0	-
Cl. 9.3,IS 4985 Cl. 10.3(Lead (first extraction))	-	0	-
Cl. 9.3,IS 4985 Cl. 10.3(Lead (third extraction))	-	0	-
Cl. 9.3,IS 4985 Cl. 10.3(Dialkyl tin C4 and higher homologues measured as tin (third extraction))	-	0	-
Cl. 9.3,IS 4985 Cl. 10.3(Cadmium (for all three extracts) )	-	0	-
Cl. 9.3,IS 4985 Cl. 10.3(Mercury (for all three extracts) )	-	0	-
Cl. 9.3,IS 4985 Cl. 10.3(Other toxic substances such as 'di-n-octyl-tin- s-s bis iso-octyl mercapto acetate' and 'butyl stearate' (third extraction) )	-	0	-
Cl. 9.3,IS 4985 Cl. 10.3(Other toxic substances including di-n-octyl-tin- s-s bis iso-octyl mercapto acetate' and 'butyl stearate')	-	0	-
Cl. 9.3,IS 4985 Cl. 10.3(Other toxic substances such as 'di-n-octyl-tin- s-s bis iso-octyl mercapto acetate' and 'butyl stearate' (third extraction) )	-	0	-
9.4 IS 12235(Part 5/Sec 1 and Sec 2)(Reversion Test : When tested by the method prescribed in IS 12235(Part 5/Sec 1 and Sec 2), a length of pipe 200 + 20 mm long shall not alter in length by more than 5 percent.)	-	2000	-
9.5 IS 12235(Part 2)(Vicat Softening Temperature: When tested by the method prescribed in IS 12235(Part 2), the Vicat softening temperature of the specimen shall not be less than 110°C.)	-	1500	-
9.6 IS 12235(Part 14)(Density)	-	5000	-

09 Apr, 2028

-
-

IS 4984 (2016)

Polyethylene pipes for water supply - Specification (Fifth Revision)

Polyethylene Pipes for Water Supply - Specification

19400 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.10(Slow Crack Growth Rate)	-	2500	-
8.9 table-6(Elongation at Break)	-	1000	-
8.8(Tensile Strength for Butt-fusion)	-	2000	-
8.7(Density)	-	1500	-
8.5 (Oxidation Induction Time)	-	1500	-
8.4( Melt Flow Rate)	-	1000	-
8.2(Longitudinal Reversion Test)	-	2000	-
8.1.2 table -5(Internal Pressure Creep Rupture Test of Pipe Joints)	-	4000	-
8,/8.1/8.1.1 table-5(PERFORMANCE REQUIREMENTS / Hydraulic Characteristics/ Internal Pressure Creep Rupture Test of Pipe)	-	32000	-
7.4.1.2(Ovality)	-	1000	-
Cl-7.4(Mean Outside Diameter (For upto 50 mm take 8 reading, above 50mm take 6 reading & average will be reported))	-	2000	-
7.2(Length)	-	1000	-
6.2.1(6.1.1 Identification Stripes)	-	500	-
6.2(Colour)	-	500	-
6.1.4(PIPE DESCRIPTION)	-	500	-
6.1.3 (PIPE DESCRIPTION)	-	500	-
6, 6.1.2(PIPE DESCRIPTION)	-	500	-
6, 6.1.1(PIPE DESCRIPTION)	-	500	-
6, 6.1(PIPE DESCRIPTION)	-	500	-
8.6(Overall migration)	-	1000	-
8.3(Carbon black)	-	2000	-
5.4(Anti oxydent)	-	500	-
5.3(e)(Carbon Black Master Batch)	-	2000	-
5.3(d)(Carbon Black Master Batch)	-	2000	-
5.3(c)(Carbon Black Master Batch)	-	2000	-
5.3(b)(Carbon Black Master Batch)	-	2000	-
5.3 (a)(Carbon Black Master Batch)	-	2000	-
5.2(Polyethylene Resin)	-	5000	-
5, 5.1 table-1(MATERIALS)	-	5000	-
7()	-	2000	-
5.2(Density)	-	2000	-
5.2(MFI @ 1900C/5.0 Kg)	-	1000	-
5.2(Volatile matter Content)	-	1500	-
5.3(Toluene Extract)	-	2000	-
Clause 7.1(Visual Apperance)	-	500	-
Clause 7.3(Coiling)	-	500	-
Clause 8.3(Carbon Black content)	-	2000	-
Clause 8.3(Carbon Black Dispersion)	-	2000	-
Clause 8.6(Overall migration (stimulate))	-	2000	-
Clause 8.6(Overall migration (surface of material))	-	2000	-
7.1(Visual Appearance)	-	500	-
7.3(Coiling)	-	500	-
Table-2 (iii, iv)(Thermal Stability (Oxidation Induction Time), Volatile Matter)	-	2000	-
Cl. 8.3(Carbon Black Content)	-	2000	-
Cl. 8.3(Carbon Black Dispersion)	-	2000	-
5.2,T2(Melt Flow rate(Temperature - 190oC,Mass 5kg)-IS 2530-1963)	-	1000	-
8.7(Density-IS 7328:2020)	-	1000	-
8.7(Corrected Density- IS 7328:2020)	-	1000	-
8.9,T6("Tensile - IS 4984-2016 (Annexure-H)")	-	2000	-
8.9,T6("Elongation -IS 4984-2016 (Annexure-H)")	-	2000	-
Cl 8.3(Carbon Black Content)	-	2000	-
Cl 8.3(Carbon Black Dispersion)	-	2000	-

09 Apr, 2028

-
-

IS 447 (1988)

Specification for rubber hose for welding (Fourth Revision)

All Grade / Type / Size / Designation

5800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 3.2 - Table 1(Bore size)	-	100	-
Cl. 3.2 - Table 1(Lining Thickness)	-	100	-
Cl. 3.2 - Table 1(Cover Thickness)	-	100	-
Cl. 3.2 - Table 1(Length %)	-	200	-
Cl. 3.3 - Table 2(Tensile strength - Lining MPA)	-	500	-
Cl. 3.3 - Table 2(Tensile strength - Cover Mpa)	-	500	-
Cl. 3.3 - Table 2(Elongation at break - Lining %)	-	500	-
Cl. 3.3 - Table 2(Elongation at break - Cover %)	-	500	-
Cl. 3.3 - Table 2(After Ageing Tensile strength - Lining %)	-	500	-
Cl. 3.3 - Table 2(After Ageing Tensile strength - Cover %)	-	500	-
Cl. 3.3 - Table 2(After Ageing Elongation at break - Lining %)	-	500	-
Cl. 3.3 - Table 2(After Ageing Elongation at break - Cover %)	-	500	-
Cl. 3.4 - Table3(Pressure Tests)	-	500	-
Cl. 3.4 - Table3(Adhesion KN/m Min)	-	500	-
Cl. 3.2 - Table 1(Bore size, mm)	-	0	-
Cl. 3.2 - Table 1(Lining Thickness, mm)	-	0	-
Cl. 3.2 - Table 1(Cover Thickness, mm)	-	0	-
Cl. 3.2 - Table 1(Length)	-	0	-
Cl. 3.3 - Table 2(Tensile strength - Lining, Mpa)	-	0	-
Cl. 3.3 - Table 2(Tensile strength - Cover, Mpa)	-	0	-
Cl. 3.3 - Table 2(Elongation at break - Lining)	-	0	-
Cl. 3.3 - Table 2(Elongation at break - Cover)	-	0	-
Cl. 3.3 - Table 2(After Ageing Tensile strength - Lining)	-	0	-
Cl. 3.3 - Table 2(After Ageing Tensile strength - Cover)	-	0	-
Cl. 3.3 - Table 2(After Ageing Elongation at break - Lining)	-	0	-
Cl. 3.3 - Table 2(After Ageing Elongation at break - Cover)	-	0	-
Cl. 3.4 - Table3(Pressure Tests)	-	0	-
Cl. 3.4 - Table3(Adhesion, KN/m Min)	-	0	-
Cl. 3.4 - Table3(Adhesion)	-	0	-
Cl. 3.4 - Table3(Pressure Tests)	-	0	-
Cl. 3.3 - Table 2(After Ageing Elongation at break - Cover)	-	0	-
Cl. 3.3 - Table 2(After Ageing Elongation at break - Lining)	-	0	-
Cl. 3.3 - Table 2(After Ageing Tensile strength - Cover)	-	0	-
Cl. 3.3 - Table 2(After Ageing Tensile strength - Lining)	-	0	-
Cl. 3.3 - Table 2(Elongation at break - Cover)	-	0	-
Cl. 3.3 - Table 2(Elongation at break - Lining)	-	0	-
Cl. 3.3 - Table 2(Tensile strength - Cover)	-	0	-
Cl. 3.3 - Table 2(Tensile strength - Lining)	-	0	-
Cl. 3.2 - Table 1(Length)	-	0	-
Cl. 3.2 - Table 1(Cover Thickness)	-	0	-
Cl. 3.2 - Table 1(Lining Thickness)	-	0	-
Cl. 3.2 - Table 1(Bore size)	-	0	-
Cl. 3.2 - Table 1(Bore size)	-	0	-
Cl. 3.2 - Table 1(Lining Thickness)	-	0	-
Cl. 3.2 - Table 1(Cover Thickness)	-	0	-
Cl. 3.2 - Table 1(Length %)	-	0	-
Cl. 3.3 - Table 2(Tensile strength - Lining MPA)	-	0	-
Cl. 3.3 - Table 2(Tensile strength - Cover Mpa)	-	0	-
Cl. 3.3 - Table 2(Elongation at break - Lining %)	-	0	-
Cl. 3.3 - Table 2(Elongation at break - Cover %)	-	0	-
Cl. 3.3 - Table 2(After Ageing Tensile strength - Lining %)	-	0	-
Cl. 3.3 - Table 2(After Ageing Tensile strength - Cover %)	-	0	-
Cl. 3.3 - Table 2(After Ageing Elongation at break - Lining %)	-	0	-
Cl. 3.3 - Table 2(After Ageing Elongation at break - Cover %)	-	0	-
Cl. 3.4 - Table3(Pressure Tests)	-	0	-
Cl. 3.4 - Table3(Adhesion KN/m Min)	-	0	-
Cl. 3.2 - Table 1(Bore size, mm)	-	0	-
Cl. 3.2 - Table 1(Lining Thickness, mm)	-	0	-
Cl. 3.2 - Table 1(Cover Thickness, mm)	-	0	-
Cl. 3.2 - Table 1(Length)	-	0	-
Cl. 3.3 - Table 2(Tensile strength - Lining, Mpa)	-	0	-
Cl. 3.3 - Table 2(Tensile strength - Cover, Mpa)	-	0	-
Cl. 3.3 - Table 2(Elongation at break - Lining)	-	0	-
Cl. 3.3 - Table 2(Elongation at break - Cover)	-	0	-
Cl. 3.3 - Table 2(After Ageing Tensile strength - Lining)	-	0	-
Cl. 3.3 - Table 2(After Ageing Tensile strength - Cover)	-	0	-
Cl. 3.3 - Table 2(After Ageing Elongation at break - Lining)	-	0	-
Cl. 3.3 - Table 2(After Ageing Elongation at break - Cover)	-	0	-
Cl. 3.4 - Table3(Pressure Tests)	-	0	-
Cl. 3.4 - Table3(Adhesion, KN/m Min)	-	0	-
Cl. 3.4 - Table3(Adhesion)	-	0	-
Cl. 3.4 - Table3(Pressure Tests)	-	0	-
Cl. 3.3 - Table 2(After Ageing Elongation at break - Cover)	-	0	-
Cl. 3.3 - Table 2(After Ageing Elongation at break - Lining)	-	0	-
Cl. 3.3 - Table 2(After Ageing Tensile strength - Cover)	-	0	-
Cl. 3.3 - Table 2(After Ageing Tensile strength - Lining)	-	0	-
Cl. 3.3 - Table 2(Elongation at break - Cover)	-	0	-
Cl. 3.3 - Table 2(Elongation at break - Lining)	-	0	-
Cl. 3.3 - Table 2(Tensile strength - Cover)	-	0	-
Cl. 3.3 - Table 2(Tensile strength - Lining)	-	0	-
Cl. 3.2 - Table 1(Length)	-	0	-
Cl. 3.2 - Table 1(Cover Thickness)	-	0	-
Cl. 3.2 - Table 1(Lining Thickness)	-	0	-
Cl. 3.2 - Table 1(Bore size)	-	0	-

09 Apr, 2028

-
included w.e.f 24.02.2026

IS 1475 (2024)

Drinking Water Coolers - Specification (Fourth Revision)

39500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Classification)	-	1000	-
5(Construction)	-	1000	-
6.3(Cooling Capacity Test)	-	5000	-
6.4(Maximum Operating Condition Test)	-	5000	-
6.5(Pull Down Test)	-	3500	-
9(Maximum Power Consumption Test)	-	3000	-
10(Annual Energy Consumption Test)	-	7000	-
11(Storage Capacity Test)	-	5000	-
13(Functional Test)	-	5000	-
14 a)(Protection against electric shock)	-	1000	-
14 b)(High voltage (electric strength) test)	-	1000	-
14 c)(Leakage current tests)	-	1000	-
14 d)(Provision for earthing)	-	1000	-

09 Apr, 2028

-
-

IS 1867 (2023)

Rubber hot water bottles - Specification (Second Revision)

20500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-3.1(Size)	-	1000	-
Cl-3.2(Capacity)	-	1000	-
Cl-4.1(Raw Material, Construction and Workmanship)	-	7500	-
Cl-4.2(Thickness)	-	500	-
Cl-4.3(Leakage Test)	-	1500	-
Cl-4.4.1(Before Ageing)	-	2500	-
Cl-4.4.2(After Ageing)	-	2500	-
Cl-4.4.3(After Immersion)	-	2500	-
Cl-4.5(Tension Set)	-	2500	-
Cl-5.2, Table-1 (iii)(Marking)	-	500	-

09 Apr, 2028

-
Included w.e.f 09.02.2026

IS 17803 (2022)

POTABLE WATER BOTTLES (COPPER, STAINLESS STEEL, ALUMINIUM) SPECIFICATION

All Grade / Type / Size / Designation

28400 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Manufacture and Workmanship)	-	500	-
5.3(Manufacture and Workmanship)	-	500	-
7.1(Materials)	-	500	-
7.1.1(copper bottle - copper)	-	500	-
7.1.1(copper bottle – lead)	-	500	-
7.1.1(copper bottle – bismuth)	-	500	-
7.1.1(copper bottle – oxygen)	-	500	-
7.1.1(copper bottle – total impurities)	-	500	-
7.1.3.3(o-ring or washer - Defects)	-	100	-
7.1.4(Auxillary closure- Bisphenol A (BPA))	-	500	-
7.1.8(Anodic coating)	-	100	-
7.1.8(Hard Anodized)	-	100	-
7.1.9(External coating– Limit of Lead)	-	100	-
7.1.9(External coating– Limit of Cadmium)	-	100	-
7.2(Capacity)	-	500	-
7.3, 7.3.1, 7.3.2(Impact resistance Test/ Drop Impact Test/ Pendulum Impact test)	-	300	-
7.4(Test for strength of shoulder strap)	-	300	-
7.5(Test for cord)	-	300	-
7.7(Leakage test)	-	300	-
7.8(Staining test)	-	300	-
7.9(Lever, device for operating or Regulating flow test)	-	300	-
7.10(Stability test)	-	300	-
7.11(Load test)	-	300	-
7.12(Food safe test/Leaching test)	-	300	-
7.12(Water potability)	-	300	-
7.13(Turbidity)	-	500	-
7.13(pH value)	-	500	-
7.13(Taste threshold)	-	500	-
7.13(Colour, Hazen units)	-	500	-
7.13(Odour)	-	500	-
7.13(Total dissolved solids)	-	500	-
9.1(Marking)	-	500	-
Cl. 7.1.5(PERFORMANCE TEST (Lever device ))	-	500	-
7.1.1.1(copper bottle – Thickness)	-	500	-
7.1.2.1(Stainless steel bottle (thickness))	-	500	-
7.1.2.1(Stainless steel bottle (material))	-	500	-
7.1.2 Note 2(Aluminium bottle (Material))	-	500	-
7.1.3.1(Stopper Material)	-	500	-
7.1.3.2(o-ring or washer Overall migration)	-	500	-
7.1.4(Auxillary closure - Material)	-	500	-
7.1.9(External coating - Thickness test)	-	500	-
7.1.9(External coating - Salt water corrosion test)	-	1000	-
7.1.9(External coating - Adhesion test)	-	1000	-
7.3.1.3 (Amendment 1)(Drop impact test - Free fall test)	-	1000	-
7.3.1.2 (Amendment 1)(Drop impact test - Vertical hang)	-	1000	-
7.3.1.1 (Amendment 1)(Drop impact test - Horizontal Hang)	-	1000	-
Cl 7.6(Test for cord chain)	-	1000	-
7.1.2 (Note 1), Annex B (Amendment 1)- Sensorial test(Annex B (Amendment 1)- Sensorial test)	-	1000	-
15. 7.1.2 (Note 1), Annex A (Amendment 1)- Leaching of food grade stainless steel(Annex A (Amendment 1)- Leaching of food grade stainless steel)	-	0	-
7.1.3(Overall Migration test (IS 9845 : 1998))	-	500	-

09 Apr, 2028

-
1. 15. 7.1.2 (Note 1), Annex A (Amendment 1)- Leaching of food grade stainless steel (Annex A (Amendment 1)- Leaching of food grade stainless steel) Leaching Test Test Facility not Available 2. 7.12 (Food safe test/Leaching test) Leaching Test Test Facility not Available.

IS 9573 : Part 2 (2017)

Rubber hose for liquefied petroleum gas (Lpg) - Specification: Part 2 domestic and commercial application (Fourth Revision)

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 4.1(General)	-	250	-
Clause 4.2(Material)	-	300	-
Clause 4.2.1(Lining)	-	250	-
Clause 4.2.2 (a)(Reinforcement)	-	200	-
Clause 4.2.2 (b)(Reinforcement)	-	200	-
Clause 4.2.3(Cover)	-	300	-
Clause 4.3 Sub Clause 4.3.1 Table 1(Bore Size)	-	200	-
Clause 4.3 Sub Clause 4.3.2 (a)(Thickness of Lining and Cover)	-	300	-
Clause 4.3 Sub Clause 4.3.2 (b)(Thickness of Lining and Cover)	-	300	-
Clause 4.3 Sub Clause 4.3.3(Length)	-	300	-
Clause 4.4 Sub Clause 4.4.1 Table 2 (i) (a)(Tensile Strength- Lining)	-	400	-
Clause 4.4 Sub Clause 4.4.1 Table 2 (i) (b)(Tensile Strength- cover)	-	350	-
Clause 4.4 Sub Clause 4.4.1 Table 2 (ii) (a)(Elongation at break- Lining)	-	400	-
Clause 4.4 Sub Clause 4.4.1 Table 2 (ii) (b)(Elongation at break- Cover)	-	300	-
Clause 4.4 Sub Clause 4.4.2 (a)(Accelerated Ageing Test lining)	-	400	-
Clause 4.4 Sub Clause 4.4.2 (b)(Accelerated Ageing Test lining)	-	350	-
Clause 4.4 Sub Clause 4.4.2 (a)(Accelerated Ageing Test cover)	-	350	-
Clause 4.4 Sub Clause 4.4.2 (b)(Accelerated Ageing Test cover)	-	350	-
Clause 4.4 Sub Clause 4.4.3 (a)(Resistance of Lining to n-pentane)	-	500	-
Clause 4.4 Sub Clause 4.4.3 (b)(Resistance of Lining to n-pentane)	-	500	-
Clause 4.5 Sub clause 4.5.1(Adhesion)	-	300	-
Clause 4.5 Sub clause 4.5.2(Low Temperature Flexibility)	-	400	-
Clause 4.5 Sub clause 4.5.3(Flexibility of Hose)	-	350	-
Clause 4.5 Sub clause 4.5.4(Ozone Resistance)	-	0	-
Clause 4.5 Sub clause 4.5.5 4.5.5.1(Proof pressure test)	-	350	-
Clause 4.5 Sub clause 4.5.5 4.5.5.2(Bursting pressure)	-	350	-
Clause 4.5 Sub clause 4.5.6(Grip Strength Test)	-	400	-
Clause 4.5 Sub clause 4.5.7(Burning Behaviour)	-	300	-
Clause 5.2 (a)(Marking Manufacturer’s name or trade-mark, if any )	-	100	-
Clause 5.2 (b)(Marking Words LPG, Max W.P. 1.0 MPa; )	-	100	-
Clause 5.2 (c)(Marking Nominal bore, 1000111)	-	100	-
Clause 5.2 (d)(Marking Batch/Lot No. )	-	100	-
Clause 5.2 (e)(Marking Month and year of manufacture )	-	100	-
Clause 5.2 (f)(Marking IS 9573 (Part 2) )	-	100	-
Clause 5.2 (f)(Marking ecommended to replace before (MONTH/YEAR) )	-	100	-
Clause 5.2.1(BIS Certification Marking )	-	100	-

09 Apr, 2028

-
Included w.e.f 27.01.2026

IS 17569 (2021)

Insulated Containers for Food Storage — Specification

All Grade / Type / Size / Designation

27800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Manufacture and Workmanship)	-	250	-
5.3(Manufacture and Workmanship)	-	250	-
7.1(Material)	-	300	-
7.1.2(Thickness)	-	500	-
7.1.2.1(Requirements and Tests(Material) – Outer Protective Case and Accessories – Lead)	-	500	-
7.1.2.1(Requirements and Tests(Material) – Outer Protective Case and Accessories – Cadmium)	-	500	-
7.1.2.8(Bisphenol A(BPA))	-	500	-
7.3(Capacity)	-	300	-
7.4(Heat Retention Capability)	-	450	-
7.5(Cold Retention Capability)	-	400	-
7.6.1(Drop Impact Test)	-	500	-
7.6.2(Pendulum Impact Test)	-	450	-
7.7(Fixing Strength of the Handle)	-	450	-
7.8(Test for Strength of Shoulder Strap)	-	400	-
7.9(Leakage Test)	-	450	-
7.10(Joint Leak Test)	-	400	-
7.11(Staining Test)	-	400	-
7.12("Check for PUF (Polyurethane Foam) or any Other Similar Thermal Insulation Material ")	-	500	-
7.13.1(Length of the Shoulder Strap)	-	350	-
7.13.2(Stability of Insulated Container)	-	300	-
7.13.3(Cleaning)	-	350	-
7.14(Seepage Test)	-	400	-
9.1(Marking)	-	250	-
9.2(BIS certification marking)	-	200	-
10(Packaging)	-	200	-
CLAUSE 5.2(Welding Defects)	-	100	-
CLAUSE 7.1(Materials)	-	250	-
CLAUSE 7.1.2.2(Thickness of plastic)	-	200	-
"CLAUSE 7.1.2.1 "(Minimum Thickness of Outer Container)	-	300	-
"CLAUSE 7.1.2.1 "(Coating Thickness)	-	500	-
"CLAUSE 7.1.2.1 "(Salt Water Corrosion Test)	-	500	-
CLAUSE 7.1.2.1(Adhesion Test)	-	500	-
CLAUSE 7.1.2.1(Lead Limit)	-	500	-
CLAUSE 7.1.2.1(Cadmium Limit)	-	500	-
CLAUSE 7.1.2.3(Outer container or lid - thickness)	-	500	-
CLAUSE 7.3(Capacity)	-	300	-
CLAUSE 7.4(Heat Retention Capability)	-	400	-
CLAUSE 7.5(Cold Retention Capability)	-	300	-
CLAUSE 7.6.1(Drop Impact)	-	350	-
CLAUSE 7.6.2(Pendulum Impact)	-	400	-
CLAUSE 7.7(Fixing Strength of Handle)	-	500	-
CLAUSE 7.8(Test for Strength of Shoulder Strap)	-	450	-
CLAUSE 7.9(Leakage Test)	-	400	-
CLAUSE 7.10(Joint Leak Test)	-	400	-
CLAUSE 7.11(Staining Test)	-	450	-
CLAUSE 7.12(Checking of PUF insulation)	-	300	-
CLAUSE 7.13.1(Length of the Shoulder Strap)	-	300	-
CLAUSE 7.13.2(Stability of Flask)	-	350	-
CLAUSE 7.1.1(Material - inner container)	-	300	-
C 7.1.1 Note Annex C(Test for leaching of food grade stainless steel)	-	300	-
CL 7.1.1 Note- Annex D(Sensational test method)	-	300	-
Cl 7.1.2.2(Polymer - test for BPA)	-	500	-
Cl 7.1.2.4(Silicon gasket - overall migration)	-	500	-
Cl 7.1.2.4(Silicon gasket - defects)	-	500	-
Cl 7.1.2.5(Performance requirement for glass lid - Fragmentation test (Cl 8.15.1 of IS 2347))	-	500	-
Cl 7.1.2.5(Performance requirement for glass lid - Ball drop test (Cl 8.15.2 of IS 2347))	-	500	-
Cl 7.1.2.5(Performance requirement for glass lid - Thermal shock test (Cl 8.15.3 of IS 2347))	-	500	-
Cl 7.1.2.5(Performance requirement for glass lid - Free fall test (Cl 8.15.4 of IS 2347))	-	500	-
Cl 7.1.2.5(Thickness of steel rim)	-	500	-
Cl 7.1.2.5(Thickness of glass lid)	-	500	-
Cl 7.1.2.6(Thermal insulating material)	-	500	-
Cl 7.1.2.7(Additional lid)	-	500	-
Cl 7.1.2.8(Hot/Cold Box - thickness)	-	500	-
Cl 7.1.2.9(Internal utensils- material)	-	500	-
Cl 7.1.2.9(Internal utensils- thickness)	-	500	-
Cl 7.1.2.9(Internal utensils - thickness of plastic lid)	-	500	-
Cl 7.1.2.9(Test for BPA)	-	500	-
CLAUSE 7.1.2.3(Outer container or lid - material)	-	500	-
5(Manufacture and Workmanship)	-	0	-
5.3(Manufacture and Workmanship)	-	0	-
7.1(Material)	-	0	-
7.1.2(Thickness)	-	0	-
7.1.2.1(Requirements and Tests(Material) – Outer Protective Case and Accessories – Lead)	-	0	-
7.1.2.1(Requirements and Tests(Material) – Outer Protective Case and Accessories – Cadmium)	-	0	-
7.1.2.8(Bisphenol A(BPA))	-	0	-
7.3(Capacity)	-	0	-
7.4(Heat Retention Capability)	-	0	-
7.5(Cold Retention Capability)	-	0	-
7.6.1(Drop Impact Test)	-	0	-
7.6.2(Pendulum Impact Test)	-	0	-
7.7(Fixing Strength of the Handle)	-	0	-
7.8(Test for Strength of Shoulder Strap)	-	0	-
7.9(Leakage Test)	-	0	-
7.10(Joint Leak Test)	-	0	-
7.11(Staining Test)	-	0	-
7.12("Check for PUF (Polyurethane Foam) or any Other Similar Thermal Insulation Material ")	-	0	-
7.13.1(Length of the Shoulder Strap)	-	0	-
7.13.2(Stability of Insulated Container)	-	0	-
7.13.3(Cleaning)	-	0	-
7.14(Seepage Test)	-	0	-
9.1(Marking)	-	0	-
9.2(BIS certification marking)	-	0	-
10(Packaging)	-	0	-
CLAUSE 5.2(Welding Defects)	-	0	-
CLAUSE 7.1(Materials)	-	0	-
CLAUSE 7.1.2.2(Thickness of plastic)	-	0	-
"CLAUSE 7.1.2.1 "(Minimum Thickness of Outer Container)	-	0	-
"CLAUSE 7.1.2.1 "(Coating Thickness)	-	0	-
"CLAUSE 7.1.2.1 "(Salt Water Corrosion Test)	-	0	-
CLAUSE 7.1.2.1(Adhesion Test)	-	0	-
CLAUSE 7.1.2.1(Lead Limit)	-	0	-
CLAUSE 7.1.2.1(Cadmium Limit)	-	0	-
CLAUSE 7.1.2.3(Outer container or lid - thickness)	-	0	-
CLAUSE 7.3(Capacity)	-	0	-
CLAUSE 7.4(Heat Retention Capability)	-	0	-
CLAUSE 7.5(Cold Retention Capability)	-	0	-
CLAUSE 7.6.1(Drop Impact)	-	0	0
CLAUSE 7.6.2(Pendulum Impact)	-	0	-
CLAUSE 7.7(Fixing Strength of Handle)	-	0	-
CLAUSE 7.8(Test for Strength of Shoulder Strap)	-	0	-
CLAUSE 7.9(Leakage Test)	-	0	-
CLAUSE 7.10(Joint Leak Test)	-	0	-
CLAUSE 7.11(Staining Test)	-	0	-
CLAUSE 7.12(Checking of PUF insulation)	-	0	-
CLAUSE 7.13.1(Length of the Shoulder Strap)	-	0	-
CLAUSE 7.13.2(Stability of Flask)	-	0	-
CLAUSE 7.1.1(Material - inner container)	-	0	-
C 7.1.1 Note Annex C(Test for leaching of food grade stainless steel)	-	0	-
CL 7.1.1 Note- Annex D(Sensational test method)	-	0	-
Cl 7.1.2.2(Polymer - test for BPA)	-	0	-
Cl 7.1.2.4(Silicon gasket - overall migration)	-	0	-
Cl 7.1.2.4(Silicon gasket - defects)	-	0	-
Cl 7.1.2.5(Performance requirement for glass lid - Fragmentation test (Cl 8.15.1 of IS 2347))	-	0	-
Cl 7.1.2.5(Performance requirement for glass lid - Ball drop test (Cl 8.15.2 of IS 2347))	-	0	-
Cl 7.1.2.5(Performance requirement for glass lid - Thermal shock test (Cl 8.15.3 of IS 2347))	-	0	-
Cl 7.1.2.5(Performance requirement for glass lid - Free fall test (Cl 8.15.4 of IS 2347))	-	0	-
Cl 7.1.2.5(Thickness of steel rim)	-	0	-
Cl 7.1.2.5(Thickness of glass lid)	-	0	-
Cl 7.1.2.6(Thermal insulating material)	-	0	-
Cl 7.1.2.7(Additional lid)	-	0	-
Cl 7.1.2.8(Hot/Cold Box - thickness)	-	0	-
Cl 7.1.2.9(Internal utensils- material)	-	0	-
Cl 7.1.2.9(Internal utensils- thickness)	-	0	-
Cl 7.1.2.9(Internal utensils - thickness of plastic lid)	-	0	-
Cl 7.1.2.9(Test for BPA)	-	0	-
CLAUSE 7.1.2.3(Outer container or lid - material)	-	0	-
5(Manufacture and Workmanship)	-	0	-
5.3(Manufacture and Workmanship)	-	0	-
7.1(Material)	-	0	-
7.1.2(Thickness)	-	0	-
7.1.2.1(Requirements and Tests(Material) – Outer Protective Case and Accessories – Lead)	-	0	-
7.1.2.1(Requirements and Tests(Material) – Outer Protective Case and Accessories – Cadmium)	-	0	-
7.1.2.8(Bisphenol A(BPA))	-	0	-
7.3(Capacity)	-	0	-
7.4(Heat Retention Capability)	-	0	-
7.5(Cold Retention Capability)	-	0	-
7.6.1(Drop Impact Test)	-	0	-
7.6.2(Pendulum Impact Test)	-	0	-
7.7(Fixing Strength of the Handle)	-	0	-
7.8(Test for Strength of Shoulder Strap)	-	0	-
7.9(Leakage Test)	-	0	-
7.10(Joint Leak Test)	-	0	-
7.11(Staining Test)	-	0	-
7.12("Check for PUF (Polyurethane Foam) or any Other Similar Thermal Insulation Material ")	-	0	-
7.13.1(Length of the Shoulder Strap)	-	0	-
7.13.2(Stability of Insulated Container)	-	0	-
7.13.3(Cleaning)	-	0	-
7.14(Seepage Test)	-	0	-
9.1(Marking)	-	0	-
9.2(BIS certification marking)	-	0	-
10(Packaging)	-	0	-
CLAUSE 5.2(Welding Defects)	-	0	-
CLAUSE 7.1(Materials)	-	0	-
CLAUSE 7.1.2.2(Thickness of plastic)	-	0	-
"CLAUSE 7.1.2.1 "(Minimum Thickness of Outer Container)	-	0	-
"CLAUSE 7.1.2.1 "(Coating Thickness)	-	0	-
"CLAUSE 7.1.2.1 "(Salt Water Corrosion Test)	-	0	-
CLAUSE 7.1.2.1(Adhesion Test)	-	0	-
CLAUSE 7.1.2.1(Lead Limit)	-	0	-
CLAUSE 7.1.2.1(Cadmium Limit)	-	0	-
CLAUSE 7.1.2.3(Outer container or lid - thickness)	-	0	-
CLAUSE 7.3(Capacity)	-	0	-
CLAUSE 7.4(Heat Retention Capability)	-	0	-
CLAUSE 7.5(Cold Retention Capability)	-	0	-
CLAUSE 7.6.1(Drop Impact)	-	0	-
CLAUSE 7.6.2(Pendulum Impact)	-	0	-
CLAUSE 7.7(Fixing Strength of Handle)	-	0	-
CLAUSE 7.8(Test for Strength of Shoulder Strap)	-	0	-
CLAUSE 7.9(Leakage Test)	-	0	-
CLAUSE 7.10(Joint Leak Test)	-	0	-
CLAUSE 7.11(Staining Test)	-	0	-
CLAUSE 7.12(Checking of PUF insulation)	-	0	-
CLAUSE 7.13.1(Length of the Shoulder Strap)	-	0	-
CLAUSE 7.13.2(Stability of Flask)	-	0	-
CLAUSE 7.1.1(Material - inner container)	-	0	-
C 7.1.1 Note Annex C(Test for leaching of food grade stainless steel)	-	0	-
CL 7.1.1 Note- Annex D(Sensational test method)	-	0	-
Cl 7.1.2.2(Polymer - test for BPA)	-	0	-
Cl 7.1.2.4(Silicon gasket - overall migration)	-	0	-
Cl 7.1.2.4(Silicon gasket - defects)	-	0	-
Cl 7.1.2.5(Performance requirement for glass lid - Fragmentation test (Cl 8.15.1 of IS 2347))	-	0	-
Cl 7.1.2.5(Performance requirement for glass lid - Ball drop test (Cl 8.15.2 of IS 2347))	-	0	-
Cl 7.1.2.5(Performance requirement for glass lid - Thermal shock test (Cl 8.15.3 of IS 2347))	-	0	-
Cl 7.1.2.5(Performance requirement for glass lid - Free fall test (Cl 8.15.4 of IS 2347))	-	0	-
Cl 7.1.2.5(Thickness of steel rim)	-	0	-
Cl 7.1.2.5(Thickness of glass lid)	-	0	-
Cl 7.1.2.6(Thermal insulating material)	-	0	-
Cl 7.1.2.7(Additional lid)	-	0	-
Cl 7.1.2.8(Hot/Cold Box - thickness)	-	0	-
Cl 7.1.2.9(Internal utensils- material)	-	0	-
Cl 7.1.2.9(Internal utensils- thickness)	-	0	-
Cl 7.1.2.9(Internal utensils - thickness of plastic lid)	-	0	-
Cl 7.1.2.9(Test for BPA)	-	0	-
CLAUSE 7.1.2.3(Outer container or lid - material)	-	0	-
5(Manufacture and Workmanship)	-	0	-
5.3(Manufacture and Workmanship)	-	0	-
7.1(Material)	-	0	-
7.1.2(Thickness)	-	0	-
7.1.2.1(Requirements and Tests(Material) – Outer Protective Case and Accessories – Lead)	-	0	-
7.1.2.1(Requirements and Tests(Material) – Outer Protective Case and Accessories – Cadmium)	-	0	-
7.1.2.8(Bisphenol A(BPA))	-	0	-
7.3(Capacity)	-	0	-
7.4(Heat Retention Capability)	-	0	-
7.5(Cold Retention Capability)	-	0	-
7.6.1(Drop Impact Test)	-	0	-
7.6.2(Pendulum Impact Test)	-	0	-
7.7(Fixing Strength of the Handle)	-	0	-
7.8(Test for Strength of Shoulder Strap)	-	0	-
7.9(Leakage Test)	-	0	-
7.10(Joint Leak Test)	-	0	-
7.11(Staining Test)	-	0	-
7.12("Check for PUF (Polyurethane Foam) or any Other Similar Thermal Insulation Material ")	-	0	-
7.13.1(Length of the Shoulder Strap)	-	0	-
7.13.2(Stability of Insulated Container)	-	0	-
7.13.3(Cleaning)	-	0	-
7.14(Seepage Test)	-	0	-
9.1(Marking)	-	0	-
9.2(BIS certification marking)	-	0	-
10(Packaging)	-	0	-
CLAUSE 5.2(Welding Defects)	-	0	-
CLAUSE 7.1(Materials)	-	0	-
CLAUSE 7.1.2.2(Thickness of plastic)	-	0	-
"CLAUSE 7.1.2.1 "(Minimum Thickness of Outer Container)	-	0	-
"CLAUSE 7.1.2.1 "(Coating Thickness)	-	0	-
"CLAUSE 7.1.2.1 "(Salt Water Corrosion Test)	-	0	-
CLAUSE 7.1.2.1(Adhesion Test)	-	0	-
CLAUSE 7.1.2.1(Lead Limit)	-	0	-
CLAUSE 7.1.2.1(Cadmium Limit)	-	0	-
CLAUSE 7.1.2.3(Outer container or lid - thickness)	-	0	-
CLAUSE 7.3(Capacity)	-	0	-
CLAUSE 7.4(Heat Retention Capability)	-	0	-
CLAUSE 7.5(Cold Retention Capability)	-	0	-
CLAUSE 7.6.1(Drop Impact)	-	0	-
CLAUSE 7.6.2(Pendulum Impact)	-	0	-
CLAUSE 7.7(Fixing Strength of Handle)	-	0	-
CLAUSE 7.8(Test for Strength of Shoulder Strap)	-	0	-
CLAUSE 7.9(Leakage Test)	-	0	-
CLAUSE 7.10(Joint Leak Test)	-	0	-
CLAUSE 7.11(Staining Test)	-	0	-
CLAUSE 7.12(Checking of PUF insulation)	-	0	-
CLAUSE 7.13.1(Length of the Shoulder Strap)	-	0	-
CLAUSE 7.13.2(Stability of Flask)	-	0	-
CLAUSE 7.1.1(Material - inner container)	-	0	-
C 7.1.1 Note Annex C(Test for leaching of food grade stainless steel)	-	0	-
CL 7.1.1 Note- Annex D(Sensational test method)	-	0	-
Cl 7.1.2.2(Polymer - test for BPA)	-	0	-
Cl 7.1.2.4(Silicon gasket - overall migration)	-	0	-
Cl 7.1.2.4(Silicon gasket - defects)	-	0	-
Cl 7.1.2.5(Performance requirement for glass lid - Fragmentation test (Cl 8.15.1 of IS 2347))	-	0	-
Cl 7.1.2.5(Performance requirement for glass lid - Ball drop test (Cl 8.15.2 of IS 2347))	-	0	-
Cl 7.1.2.5(Performance requirement for glass lid - Thermal shock test (Cl 8.15.3 of IS 2347))	-	0	-
Cl 7.1.2.5(Performance requirement for glass lid - Free fall test (Cl 8.15.4 of IS 2347))	-	0	-
Cl 7.1.2.5(Thickness of steel rim)	-	0	-
Cl 7.1.2.5(Thickness of glass lid)	-	0	-
Cl 7.1.2.6(Thermal insulating material)	-	0	-
Cl 7.1.2.7(Additional lid)	-	0	-
Cl 7.1.2.8(Hot/Cold Box - thickness)	-	0	-
Cl 7.1.2.9(Internal utensils- material)	-	0	-
Cl 7.1.2.9(Internal utensils- thickness)	-	0	-
Cl 7.1.2.9(Internal utensils - thickness of plastic lid)	-	0	-
Cl 7.1.2.9(Test for BPA)	-	0	-
CLAUSE 7.1.2.3(Outer container or lid - material)	-	0	-

09 Apr, 2028

-
Included w.e.f. 16.02.2026 Excluding welded flasks.

IS 17790 (2022)

INSULATED FLASK FOR DOMESTIC USE SPECIFICATION

27500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.0(Manufacture and Workmanship)	-	450	-
5.3(Welding Defects)	-	500	-
7.1(Material)	-	150	-
7.1.2.1 & 7.1.2.2(Thickness)	-	500	-
7.1.3(Coating Thickness)	-	850	-
7.1.3(Material – coating cadmium)	-	800	-
7.1.2.2(Bisphenol A (BPA))	-	1200	-
7.1.4.3(O-Ring / Washer- Defects)	-	500	-
7.2(Capacity)	-	250	-
7.3(Heat Retention Capability)	-	700	-
7.4(Cold Retention Capability)	-	700	-
7.5.1(Drop Impact Test)	-	600	-
7.5.2(Pendulum Impact Test)	-	700	-
7.6(Fixing Strength of the Handle)	-	700	-
7.7(Test for Strength of Shoulder Strap)	-	700	-
7.8(Test for strength of cord)	-	700	-
7.9(Leakage Test)	-	900	-
7.10(Joint Leak Test)	-	1000	-
7.11(Staining Test)	-	1000	-
7.13(Seepage test)	-	1000	-
7.14(Test for Lever, device for operating Or regulating flow test)	-	1100	-
7.15(Test for length of the shoulder cap)	-	1000	-
7.16(Stability of Flask)	-	1050	-
7.17(Pour Test)	-	1000	-
9.1(Marking)	-	400	-
9.2(BIS certification marking)	-	100	-
10(Packaging)	-	300	-
7.1.3(Coating- Adhesion test)	-	800	-
7.1.3(Coating - Thickness test)	-	700	-
7.1.3(Coating- Salt water corrosion test)	-	800	-
7.1.4.1(Stopper)	-	500	-
7.1.4.2(O-ring/washer- Overall migration)	-	500	-
7.1.4.2(O-ring/washer- Shore hardness)	-	500	-
7.1.4.2(O-ring/washer- BPA)	-	1100	-
7.1.5(Auxillary closure)	-	500	-
7.12(Check for PUF (Polyurethane Foam) or Any Other Similar Thermal Insulation Material)	-	500	-
7.18(Endurance Test for O-Ring, Washer and Stopper)	-	900	-
Cl-5.3(Welding Electrode)	-	950	-
Cl.7.1.2.1(Test for leaching)	-	500	-
Cl. 7.1.2.1(Sensorial Test)	-	500	-
Cl-7.1.3, Table-1(Lead Limit)	-	400	-
5.0(Manufacture and Workmanship)	-	0	-
5.3(Welding Defects)	-	0	-
7.1(Material)	-	0	-
7.1.2.1 & 7.1.2.2(Thickness)	-	0	-
7.1.3(Coating Thickness)	-	0	-
7.1.3(Material – coating cadmium)	-	0	-
7.1.2.2(Bisphenol A (BPA))	-	0	-
7.1.4.3(O-Ring / Washer- Defects)	-	0	-
7.2(Capacity)	-	0	-
7.3(Heat Retention Capability)	-	0	-
7.4(Cold Retention Capability)	-	0	-
7.5.1(Drop Impact Test)	-	0	-
7.5.2(Pendulum Impact Test)	-	0	-
7.6(Fixing Strength of the Handle)	-	0	-
7.7(Test for Strength of Shoulder Strap)	-	0	-
7.8(Test for strength of cord)	-	0	-
7.9(Leakage Test)	-	0	-
7.10(Joint Leak Test)	-	0	-
7.11(Staining Test)	-	0	-
7.13(Seepage test)	-	0	-
7.14(Test for Lever, device for operating Or regulating flow test)	-	0	-
7.15(Test for length of the shoulder cap)	-	0	-
7.16(Stability of Flask)	-	0	-
7.17(Pour Test)	-	0	-
9.1(Marking)	-	0	-
9.2(BIS certification marking)	-	0	-
10(Packaging)	-	0	-
7.1.3(Coating- Adhesion test)	-	0	-
7.1.3(Coating - Thickness test)	-	0	-
7.1.3(Coating- Salt water corrosion test)	-	0	-
7.1.4.1(Stopper)	-	0	-
7.1.4.2(O-ring/washer- Overall migration)	-	0	-
7.1.4.2(O-ring/washer- Shore hardness)	-	0	-
7.1.4.2(O-ring/washer- BPA)	-	0	-
7.1.5(Auxillary closure)	-	0	-
7.12(Check for PUF (Polyurethane Foam) or Any Other Similar Thermal Insulation Material)	-	0	-
7.18(Endurance Test for O-Ring, Washer and Stopper)	-	0	-
Cl-5.3(Welding Electrode)	-	0	-
Cl.7.1.2.1(Test for leaching)	-	0	-
Cl. 7.1.2.1(Sensorial Test)	-	0	-
Cl-7.1.3, Table-1(Lead Limit)	-	0	-

09 Apr, 2028

-
Included w.e.f. 16.02.2026 Excluding welded flasks.

IS 17526 (2021)

STAINLESS STEEL VACUUM FLASKS - SPECIFICATION

All Grade / Type / Size / Designation

25500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Manufacture and Workmanship)	-	500	-
5.3(Manufacture and Workmanship)	-	500	-
7.1.1(Material- Inner containers)	-	500	-
7.1.2(Outer protective case and accessories - Thickness)	-	500	-
7.1.2.1(Coating - Limit of lead)	-	500	-
7.1.2.1(Coating - Limit of Cadmium)	-	500	-
7.4(Heat Retention Capability)	-	500	-
7.5(Cold Retention Capability)	-	1000	-
7.6.1(Drop Impact Test)	-	500	-
7.6.2(Pendulum Impact Test)	-	500	-
7.7(Fixing Strength of the Handle)	-	750	-
7.8(Test for Strength of Shoulder Strap)	-	750	-
7.8.1(Test for strength of cord)	-	750	-
7.9(Leakage Test)	-	750	-
7.10(Joint Leak Test)	-	500	-
7.11(Staining Test)	-	1000	-
7.12(Length of the Shoulder Strap)	-	500	-
7.13(Stability of Flask/Bottle)	-	500	-
7.14(Pour Test)	-	500	-
9.1(Marking)	-	250	-
9.2(BIS certification marking)	-	250	-
10(Packaging)	-	250	-
7.1.2(Outer protective case and accessories - Material)	-	1000	-
7.1.2.1(Coating- Thickness test)	-	1400	-
7.1.2.1(Coating- Adhesion test)	-	1000	-
7.1.2.1(Coating- Salt Water corrosion test)	-	1000	-
7.2(Arrangement for holding and suspension)	-	500	-
7.15 (Amendment 1)(Endurance test for O-Ring, Washer and Stopper)	-	1500	-
7.1.3(Overall migration)	-	2500	-
7.1.3 (Amendment 1)(O-Ring and washer- Hardness)	-	1500	-
7.1.3 (Amendment 1)(O-Ring and washer-- BPA)	-	500	-
7.1.3(Stopper Material)	-	500	-
7.1.4(Auxillary closure "Bisphenol A (BPA)")	-	500	-
7.3(Capacity)	-	500	-
5(Manufacture and Workmanship)	-	0	-
5.3(Manufacture and Workmanship)	-	0	-
7.1.1(Material- Inner containers)	-	0	-
7.1.2(Outer protective case and accessories - Thickness)	-	0	-
7.1.2.1(Coating - Limit of lead)	-	0	-
7.1.2.1(Coating - Limit of Cadmium)	-	0	-
7.4(Heat Retention Capability)	-	0	-
7.5(Cold Retention Capability)	-	0	-
7.6.1(Drop Impact Test)	-	0	-
7.6.2(Pendulum Impact Test)	-	0	-
7.7(Fixing Strength of the Handle)	-	0	-
7.8(Test for Strength of Shoulder Strap)	-	0	-
7.8.1(Test for strength of cord)	-	0	-
7.9(Leakage Test)	-	0	-
7.10(Joint Leak Test)	-	0	-
7.11(Staining Test)	-	0	-
7.12(Length of the Shoulder Strap)	-	0	-
7.13(Stability of Flask/Bottle)	-	0	-
7.14(Pour Test)	-	0	-
9.1(Marking)	-	0	-
9.2(BIS certification marking)	-	0	-
10(Packaging)	-	0	-
7.1.2(Outer protective case and accessories - Material)	-	0	-
7.1.2.1(Coating- Thickness test)	-	0	-
7.1.2.1(Coating- Adhesion test)	-	0	-
7.1.2.1(Coating- Salt Water corrosion test)	-	0	-
7.2(Arrangement for holding and suspension)	-	0	-
7.15 (Amendment 1)(Endurance test for O-Ring, Washer and Stopper)	-	0	-
7.1.3(Overall migration)	-	0	-
7.1.3 (Amendment 1)(O-Ring and washer- Hardness)	-	0	-
7.1.3 (Amendment 1)(O-Ring and washer-- BPA)	-	0	-
7.1.3(Stopper Material)	-	0	-
7.1.4(Auxillary closure "Bisphenol A (BPA)")	-	0	-
7.3(Capacity)	-	0	-

09 Apr, 2028

-
Included w.e.f. 16.02.2026

IS 14333 (2022)

Polyethylene Pipes for Sewerage and Industrial Chemicals and Effluent ï¿½ Specification (First Revision)

Testing facility available only for pipe of nominal dia from 63 mm upto and including 630 mm.

14400 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.2.1,T2("Base Density (At 27°C Temp.)-IS 7328:2020 ")	-	0	-
5.2.1,T2(Melt Flow Rate (At 190°C /5kg)-IS 2530:1963)	-	0	-
5.2.1,T2(Thermal Stability(Oxidation Induction Time)-IS 4984:2016(Annexure-B))	-	0	-
5.2.1,T2("Volatile Matter- IS 4984:2016 (Annexure-C)")	-	0	-
5.2.1,T2("Water Content-IS 4984:2016 (Annexure-D)")	-	0	-
5.2.1.1, T2(Compound Density-IS 7328:2020)	-	0	-
5.2.1.1, T2("Compound carbon black -IS 2530:1963 content")	-	0	-
5.2.1.1, T2(Compound Toluene extract - Any Method)	-	0	-
5.2.1.1, T2(Compound carbon black particle size- Any Method)	-	0	-
5.2.1.1, T2(Compound ash content - Any Method)	-	0	-
5.2.1.1, T2("Compound carbon black -IS 2530:1963 dispersion")	-	0	-
5.3(Density of Higher olefin - IS 7328:2020)	-	500	-
5.3(Olefin Constituents- 14333-2022)	-	0	-
5.3(Loading of Carbon Black - IS 2530:1963)	-	0	-
5.3(Ash content- Any Method)	-	0	-
5.3(Toluene extract - Any Method)	-	0	-
5.3("Maximum volatile matter -IS 4984:2016 (Annexure-C)")	-	0	-
5.3(Carbon black particle size - Any Method)	-	0	-
5.4(Antioxidant - Any Method)	-	0	-
6(Pipe Description - IS 14333-2022)	-	500	-
6.2(Colour- IS 14333-2022)	-	100	-
7.1(Visual Appearance- IS 14333-2022)	-	100	-
7.2(Length- IS 14333-2022)	-	200	-
7.3(Coiling- IS 14333-2022)	-	200	-
7.4,T3 of IS 4984(Outside Diameter-IS 4984-2016)	-	200	-
7.4,T4 of IS 4984(wall Thickness-IS 4984-2016)	-	200	-
7.4,T3 of IS 4984(Ovality-IS 4984-2016)	-	200	-
8.1.1, T4(Internal Pressure creep Rupture test, Temperature - 27 oC , Test Period - 100 hrs.-IS 4984-2016 (Annexure-E))	-	1000	-
8.1.1, T4(Internal Pressure creep Rupture test, Temperature - 80 oC , Test Period - 48 hrs.-IS 4984-2016 (Annexure-E))	-	1000	-
8.1.1, T4(Internal Pressure creep Rupture test, Temperature - 80 oC , Test Period - 165 hrs.-IS 4984-2016 (Annexure-E))	-	1000	-
8.1.1, T4(Internal Pressure creep Rupture test, Temperature - 80 oC , Test Period - 1000 hrs.-IS 4984-2016 (Annexure-E))	-	1000	-
8.1.2, T4(Internal Pressure creep Rupture test, Temperature - 80 oC , Test Period - 48 hrs.-IS 4984-2016 (Annexure-E))	-	1000	-
8.2("Longitudinal Reversion Test - IS 4984-2016 (Annexure-F)")	-	500	-
8.3(Carbon black content- IS 2530-1963)	-	500	-
8.3(Carbon black content Dispersion- IS 2530-1963)	-	300	-
8.4(Melt Flow rate(Temperature - 190oC,Mass 5kg)-IS 2530-1963)	-	450	-
8.5(Oxidation Induction Time -IS 4984:2016(Annexure-B))	-	450	-
8.6(Density-IS 7328:2020)	-	200	-
8.7("Tensile Strength for Butt Fusion - IS 4984-2016 (Annexure-G)")	-	1000	-
8.8,T5("Tensile - IS 4984-2016 (Annexure-H)")	-	1000	-
8.8,T5("Elongation -IS 4984-2016 (Annexure-H)")	-	1000	-
8.9(Slow Crack Growth Rate{Internal Pressure creep Rupture test, Temperature - 80±1 oC , Test Pressure – 0.80MPa, Test Period - 500 hrs.-IS 4984-2016 (Annexure-E &J))	-	1300	-
5.2.1.1, T2(Compound maximum volatile matter -IS 4984:2016 (Annexure-C))	-	0	-
5.3(Loading of Carbon Black - IS 2530:1963)	-	0	-
5.2.1,T2(Melt Flow Rate (At 190°C /5kg)-IS 2530:1963)	-	0	-
5.2.1,T2(Thermal Stability(Oxidation Induction Time)-IS 4984:2016(Annexure-B))	-	0	-
5.2.1,T2("Volatile Matter- IS 4984:2016 (Annexure-C)")	-	0	-
5.2.1,T2("Water Content-IS 4984:2016 (Annexure-D)")	-	0	-
5.2.1.1, T2(Compound Density-IS 7328:2020)	-	0	-
5.2.1.1, T2("Compound carbon black -IS 2530:1963 content")	-	0	-
5.2.1.1, T2(Compound Toluene extract - Any Method)	-	0	-
5.2.1.1, T2(Compound carbon black particle size- Any Method)	-	0	-
5.2.1.1, T2(Compound ash content - Any Method)	-	0	-
5.2.1.1, T2("Compound carbon black -IS 2530:1963 dispersion")	-	0	-
5.3(Density of Higher olefin - IS 7328:2020)	-	0	-
5.3(Olefin Constituents- 14333-2022)	-	0	-
5.3(Ash content- Any Method)	-	0	-
5.3(Toluene extract - Any Method)	-	0	-
5.3("Maximum volatile matter -IS 4984:2016 (Annexure-C)")	-	0	-
5.3(Carbon black particle size - Any Method)	-	0	-
5.4(Antioxidant - Any Method)	-	0	-
6(Pipe Description - IS 14333-2022)	-	0	-
6.2(Colour- IS 14333-2022)	-	0	-
7.1(Visual Appearance- IS 14333-2022)	-	0	-
7.2(Length- IS 14333-2022)	-	0	-
7.3(Coiling- IS 14333-2022)	-	0	-
7.4,T3 of IS 4984(Outside Diameter-IS 4984-2016)	-	0	-
7.4,T4 of IS 4984(wall Thickness-IS 4984-2016)	-	0	-
7.4,T3 of IS 4984(Ovality-IS 4984-2016)	-	0	-
8.1.1, T4(Internal Pressure creep Rupture test, Temperature - 27 oC , Test Period - 100 hrs.-IS 4984-2016 (Annexure-E))	-	0	-
8.1.1, T4(Internal Pressure creep Rupture test, Temperature - 80 oC , Test Period - 48 hrs.-IS 4984-2016 (Annexure-E))	-	0	-
8.1.1, T4(Internal Pressure creep Rupture test, Temperature - 80 oC , Test Period - 165 hrs.-IS 4984-2016 (Annexure-E))	-	0	-
8.1.1, T4(Internal Pressure creep Rupture test, Temperature - 80 oC , Test Period - 1000 hrs.-IS 4984-2016 (Annexure-E))	-	0	-
8.1.2, T4(Internal Pressure creep Rupture test, Temperature - 80 oC , Test Period - 48 hrs.-IS 4984-2016 (Annexure-E))	-	0	-
8.2("Longitudinal Reversion Test - IS 4984-2016 (Annexure-F)")	-	0	-
8.3(Carbon black content- IS 2530-1963)	-	0	-
8.3(Carbon black content Dispersion- IS 2530-1963)	-	0	-
8.4(Melt Flow rate(Temperature - 190oC,Mass 5kg)-IS 2530-1963)	-	0	-
8.5(Oxidation Induction Time -IS 4984:2016(Annexure-B))	-	0	-
8.6(Density-IS 7328:2020)	-	0	-
8.7("Tensile Strength for Butt Fusion - IS 4984-2016 (Annexure-G)")	-	0	-
8.8,T5("Tensile - IS 4984-2016 (Annexure-H)")	-	0	-
8.8,T5("Elongation -IS 4984-2016 (Annexure-H)")	-	0	-
8.9(Slow Crack Growth Rate{Internal Pressure creep Rupture test, Temperature - 80±1 oC , Test Pressure – 0.80MPa, Test Period - 500 hrs.-IS 4984-2016 (Annexure-E &J))	-	0	-
5.2.1.1, T2(Compound maximum volatile matter -IS 4984:2016 (Annexure-C))	-	0	-
5.3(Loading of Carbon Black - IS 2530:1963)	-	0	-
5.2.1,T2(Melt Flow Rate (At 190°C /5kg)-IS 2530:1963)	-	0	-
5.2.1,T2(Thermal Stability(Oxidation Induction Time)-IS 4984:2016(Annexure-B))	-	0	-
5.2.1,T2("Volatile Matter- IS 4984:2016 (Annexure-C)")	-	0	-
5.2.1,T2("Water Content-IS 4984:2016 (Annexure-D)")	-	0	-
5.2.1.1, T2(Compound Density-IS 7328:2020)	-	0	-
5.2.1.1, T2("Compound carbon black -IS 2530:1963 content")	-	0	-
5.2.1.1, T2(Compound Toluene extract - Any Method)	-	0	-
5.2.1.1, T2(Compound carbon black particle size- Any Method)	-	0	-
5.2.1.1, T2(Compound ash content - Any Method)	-	0	-
5.2.1.1, T2("Compound carbon black -IS 2530:1963 dispersion")	-	0	-
5.3(Density of Higher olefin - IS 7328:2020)	-	0	-
5.3(Olefin Constituents- 14333-2022)	-	0	-
5.3(Ash content- Any Method)	-	0	-
5.3(Toluene extract - Any Method)	-	0	-
5.3("Maximum volatile matter -IS 4984:2016 (Annexure-C)")	-	0	-
5.3(Carbon black particle size - Any Method)	-	0	-
5.4(Antioxidant - Any Method)	-	0	-
6(Pipe Description - IS 14333-2022)	-	0	-
6.2(Colour- IS 14333-2022)	-	0	-
7.1(Visual Appearance- IS 14333-2022)	-	0	-
7.2(Length- IS 14333-2022)	-	0	-
7.3(Coiling- IS 14333-2022)	-	0	-
7.4,T3 of IS 4984(Outside Diameter-IS 4984-2016)	-	0	-
7.4,T4 of IS 4984(wall Thickness-IS 4984-2016)	-	0	-
7.4,T3 of IS 4984(Ovality-IS 4984-2016)	-	0	-
8.1.1, T4(Internal Pressure creep Rupture test, Temperature - 27 oC , Test Period - 100 hrs.-IS 4984-2016 (Annexure-E))	-	0	-
8.1.1, T4(Internal Pressure creep Rupture test, Temperature - 80 oC , Test Period - 48 hrs.-IS 4984-2016 (Annexure-E))	-	0	-
8.1.1, T4(Internal Pressure creep Rupture test, Temperature - 80 oC , Test Period - 165 hrs.-IS 4984-2016 (Annexure-E))	-	0	-
8.1.1, T4(Internal Pressure creep Rupture test, Temperature - 80 oC , Test Period - 1000 hrs.-IS 4984-2016 (Annexure-E))	-	0	-
8.1.2, T4(Internal Pressure creep Rupture test, Temperature - 80 oC , Test Period - 48 hrs.-IS 4984-2016 (Annexure-E))	-	0	-
8.2("Longitudinal Reversion Test - IS 4984-2016 (Annexure-F)")	-	0	-
8.3(Carbon black content- IS 2530-1963)	-	0	-
8.3(Carbon black content Dispersion- IS 2530-1963)	-	0	-
8.4(Melt Flow rate(Temperature - 190oC,Mass 5kg)-IS 2530-1963)	-	0	-
8.5(Oxidation Induction Time -IS 4984:2016(Annexure-B))	-	0	-
8.6(Density-IS 7328:2020)	-	0	-
8.7("Tensile Strength for Butt Fusion - IS 4984-2016 (Annexure-G)")	-	0	-
8.8,T5("Tensile - IS 4984-2016 (Annexure-H)")	-	0	-
8.8,T5("Elongation -IS 4984-2016 (Annexure-H)")	-	0	-
8.9(Slow Crack Growth Rate{Internal Pressure creep Rupture test, Temperature - 80±1 oC , Test Pressure – 0.80MPa, Test Period - 500 hrs.-IS 4984-2016 (Annexure-E &J))	-	0	-
5.2.1.1, T2(Compound maximum volatile matter -IS 4984:2016 (Annexure-C))	-	0	-

09 Apr, 2028

-
Included w.e.f 06.01.2026 Except Material (Clause-5)

IS 302 : Part 2 : Sec 23 (2009)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 23 appliances for skin or hair care (First Revision)

All Grade / Type / Size / Designation

17900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
32(Radiation ,Toxicity and similar hazards)	-	500	-
31(Resistance to Rusting)	-	1000	-
30(Resistance to Heat & Fire)	-	900	-
29(Clearances, Creepage Distances & Solid Insulation)	-	500	-
28(Screws & Connection)	-	500	-
27(Provision For Earthing)	-	500	-
26(Terminals For External Conductors)	-	1000	-
25(Supply Connection & External Flexible Cables and Cords)	-	1000	-
24(Component)	-	500	-
23(Internal wiring)	-	1000	-
22(Construction)	-	500	-
21(Mechanical strength)	-	1000	-
20(Stability & Mechanical Hazards)	-	1000	-
19(Abnormal Operation)	-	1000	-
18(Endurance)	-	0	-
17(Overload Protection/ Overload Protection of Transformers & Associated Circuits)	-	500	-
16(Leakage Current and Electric Strength)	-	500	-
15(Moisture Resistance)	-	1000	-
14(Transient Over Voltage)	-	500	-
13(Leakage Current and Electric Strength at Operating Temperature)	-	500	-
11(Temperature Rise/Heating)	-	1000	-
10(Power Input & Current)	-	1000	-
9(Starting Of Motor Operated Appliances)	-	0	-
8(Protection against Electric Shock/ Protection against Access to Live Parts)	-	500	-
7(Marking/ Marking & Instructions)	-	500	-
6(Classification)	-	500	-
22.32(CONSTRUCTION)	-	500	-
19.11.4.1(Electrostatic discharges)	-	0	-
19.11.4.2(Radiated fields)	-	0	-
19.11.4.3(Fast transient bursts)	-	0	-
19.11.4.4(Surge immunity test)	-	0	-
19.11.4.5(Immunity to conducted discharges)	-	0	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	0	-
19.11.4.7(Harmonics)	-	0	-

09 Apr, 2028

-
Included w.e.f 06.01.2026 "19.11.4.1 (Electrostatic discharges) 19.11.4.2 (Radiated fields) 19.11.4.3 (Fast transient bursts) 19.11.4.4 (Surge immunity test) 19.11.4.5 (Immunity to conducted discharges) 19.11.4.6 (Class 3 Voltage dips and interruptions) 19.11.4.7 (Harmonics)"

IS 302 : Part 2 : Sec 30 (2007)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 30 room heaters (First Revision)

All Grade / Type / Size / Designation

3200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.6 (Classification)	-	100	-
Cl.6 (Classification)	-	0	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	100	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7(Marking and Instructions)	-	0	-
Cl.7(Marking and Instructions)	-	0	-
Cl.7(Marking and Instructions)	-	0	-
Cl.7.3(Marking and Instructions)	-	0	-
Cl.7.3(Marking and Instructions)	-	0	-
Cl.7.3(Marking and Instructions)	-	0	-
Cl.7.4(Marking and Instructions)	-	0	-
Cl.7.5(Marking and Instructions)	-	0	-
Cl.7.6 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.8 of IS :302-1:2008(Marking and Instructions)	-	0	-
Cl.7.9 of IS :302-1:2008(Marking and Instructions)	-	0	-
Cl.7.10 of IS :302-1:2008(Marking and Instructions)	-	0	-
Cl.7.11 of IS :302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12.1 & IS:302-1:2009(Marking and Instructions)	-	0	-
Cl.7.13 of IS 302-1:2008(Marking and Instructions)	-	0	-
Cl.7.14 of IS302-1:2008(Marking and Instructions)	-	0	-
Cl.7.14(Marking and Instructions)	-	0	-
Cl.7.14(Marking and Instructions)	-	0	-
Cl.7.15 of IS 302-1:2008(Marking and Instructions)	-	0	-
Cl.7.15 of IS 302-1:2008(Marking and Instructions)	-	0	-
Cl.7.15 of IS 302-1:2008(Marking and Instructions)	-	0	-
Cl.7.15 of IS 302-1:2008(Marking and Instructions)	-	0	-
Cl.7.101(Marking and Instructions)	-	0	-
Cl.8 & IS:302-1:2008(Protection Against Access to Live Parts)	-	100	-
Cl.10 & IS:302-1:2008(Power Input and Current)	-	100	-
Cl.11 & IS:302-1:2008(Heating)	-	100	-
Cl.11 & IS:302-1:2008(Heating)	-	0	-
Cl.11 & IS:302-1:2008(Heating)	-	0	-
Cl.11 & IS:302-1:2008(Heating)	-	0	-
Cl.11 & IS:302-1:2008(Heating)	-	0	-
Cl.11 & IS:302-1:2008(Heating)	-	0	-
Cl.11 & IS:302-1:2008(Heating)	-	0	-
Cl.11 & IS:302-1:2008(Heating)	-	0	-
Cl.11 & IS:302-1:2008(Heating)	-	0	-
Cl.11 & IS:302-1:2008(Heating)	-	0	-
Cl.11 & IS:302-1:2008(Heating)	-	0	-
Cl.11 & IS:302-1:2008(Heating)	-	0	-
Cl.11 & IS:302-1:2008(Heating)	-	0	-
Cl.11 & IS:302-1:2008(Heating)	-	0	-
Cl.11 & IS:302-1:2008(Heating)	-	0	-
Cl.11 & IS:302-1:2008(Heating)	-	0	-
Cl.11.8(Heating)	-	0	-
Cl.11.8(Heating)	-	0	-
Cl.11.8(Heating)	-	0	-
Cl.13 & IS:302-1:2008(Leakage Current & Electric Strength at operating temp. )	-	100	-
Cl.13 & IS:302-1:2008(Leakage Current & Electric Strength at operating temp. )	-	0	-
Cl.14 & IS:302-1:2008(Transient Over Voltages)	-	100	-
Cl.15 & IS: 302-1:2008(Moisture Resistance )	-	300	-
Cl.15.3 of IS 302-1:200(Moisture Resistance )	-	0	-
Cl.16 & IS:302-1:2008(Leakage Current & Electric Strength )	-	100	-
Cl.16 & IS:302-1:2008(Leakage Current & Electric Strength )	-	0	-
Cl.17 & IS:302-1:2008(Over load Protection of Transformers and Associated Circuits )	-	100	-
Cl.18 (Endurance. )	-	0	-
Cl.19 & IS:302-1:2008(Abnormal Operation.)	-	500	-
Cl.19 & IS:302-1:2008(Abnormal Operation.)	-	0	-
Cl.19 & IS:302-1:2008(Abnormal Operation.)	-	0	-
Cl.19 & IS:302-1:2008(Abnormal Operation.)	-	0	-
Cl.19.101(Abnormal Operation.)	-	0	-
Cl.19.102(Abnormal Operation.)	-	0	-
Cl.19.103(Abnormal Operation.)	-	0	-
Cl.19.104(Abnormal Operation.)	-	0	-
Cl.19.105(Abnormal Operation.)	-	0	-
Cl.19.106(Abnormal Operation.)	-	0	-
Table 8 of IS 302-1:2008(Abnormal Operation.)	-	0	-
Cl.19.107(Abnormal Operation.)	-	0	-
Cl.19.108(Abnormal Operation.)	-	0	-
Cl.19.109(Abnormal Operation.)	-	0	-
Cl.19.110(Abnormal Operation.)	-	0	-
Cl.19.111(Abnormal Operation.)	-	0	-
Cl.19.112(Abnormal Operation.)	-	0	-
Cl.19.113(Abnormal Operation.)	-	0	-
Cl.19.114(Abnormal Operation.)	-	0	-
Cl.20 & IS:302-1:2008(Stability & Mechanical Hazards)	-	100	-
Cl.21 & IS:302-1:2008)(Mechanical Strength.)	-	100	-
Cl.21.2 of IS 302-1:2008(Mechanical Strength.)	-	0	-
Cl.21.101 (Mechanical Strength.)	-	0	-
Cl.21.102(Mechanical Strength.)	-	0	-
Cl.21.103(Mechanical Strength.)	-	0	-
Cl.22.1 of IS 302-1:2008(Construction)	-	200	-
Cl.22.5 of IS 302-1:2008(Construction)	-	0	-
Cl.22.6 of IS 302-1:2008(Construction)	-	0	-
Cl.22.7 of IS 302-1:2008(Construction)	-	0	-
Cl.22.8 of IS 302-1:2008(Construction)	-	0	-
Cl.22.9 of IS 302-1:2008(Construction)	-	0	-
Cl.22.11(Construction)	-	0	-
Cl.22.12 of IS 302-1:2008(Construction)	-	0	-
Cl.22.13 of IS 302-1:2008(Construction)	-	0	-
Cl.22.14 of IS 302-1:2008(Construction)	-	0	-
Cl.22.15 of IS 302-1:2008(Construction)	-	0	-
Cl.22.18 of IS 302-1:2008(Construction)	-	0	-
Cl.22.20 of IS 302-1:2008(Construction)	-	0	-
Cl.22.21 of IS 302-1:2008(Construction)	-	0	-
Cl.23 & IS:302-1:2008(Internal Wiring )	-	100	-
Cl.23.4 & Cl.29 of 302-1:2008(Internal Wiring )	-	0	-
Cl.23.5 of 302-1:2008(Internal Wiring )	-	0	-
Cl.23.7 of 302-1:2008(Internal Wiring )	-	0	-
C.23.7 of 302-1:2008(Internal Wiring )	-	0	-
Cl.24.1 of 302-1:2008(Component)	-	100	-
Cl.24.1 of 302-1:2008(Component)	-	0	-
Cl.24.1.3 (Component)	-	0	-
Cl.24.1.3 (Component)	-	0	-
Cl.24.1.3 (Component)	-	0	-
Cl.24.1.3 (Component)	-	0	-
C.24.1.4(Component)	-	0	-
C.24.2 of 302-1:2008(Component)	-	0	-
Cl.24.10(Component)	-	0	-
Cl.25.1 of 302-1:2008(Supply Connection and External Flexible Cords )	-	100	-
Cl. 25.2 of IS 3021:2008(Supply Connection and External Flexible Cords )	-	0	-
Cl. 25.3 of IS 302-1:2008(Supply Connection and External Flexible Cords )	-	0	-
Cl. 25.4 of IS 302-1:2008(Supply Connection and External Flexible Cords )	-	0	-
Cl.25.5 of 302-1:2008(Supply Connection and External Flexible Cords )	-	0	-
Cl.25.6 of 302-1:2008(Supply Connection and External Flexible Cords )	-	0	-
Cl.25.7.(Supply Connection and External Flexible Cords )	-	0	-
Cl.25.8(Supply Connection and External Flexible Cords )	-	0	-
Cl. 25.9(Supply Connection and External Flexible Cords )	-	0	-
Cl.25.10 of 302-1:2008(Supply Connection and External Flexible Cords )	-	0	-
Cl. 25.11(Supply Connection and External Flexible Cords )	-	0	-
Cl. 25.12(Supply Connection and External Flexible Cords )	-	0	-
Cl. 25.13(Supply Connection and External Flexible Cords )	-	0	-
Cl.25.14 of IS 302-1:2008(Supply Connection and External Flexible Cords )	-	0	-
Cl.25.15 of IS 302-1:2008(Supply Connection and External Flexible Cords )	-	0	-
Cl.25.15 of IS 302-1:2008(Supply Connection and External Flexible Cords )	-	0	-
Cl.25.17 of IS 302-1:2008(Supply Connection and External Flexible Cords )	-	0	-
Cl.25.18(Supply Connection and External Flexible Cords )	-	0	-
Cl.25.20(Supply Connection and External Flexible Cords )	-	0	-
Cl.26.1 of IS 302-1:2008(Terminal for External Conductors )	-	100	-
Cl.26.10 of IS 302-1:2008(Terminal for External Conductors )	-	0	-
Cl.26.11 of IS 302-1:2008(Terminal for External Conductors )	-	0	-
Cl.27.1 of 302-1:2008(Provision for Earthing.)	-	100	-
Cl.27.5 of 302-1:2008(Provision for Earthing.)	-	0	-
Cl.28 of 302-1:2008(Screws and Connections.)	-	100	-
Cl.29 & IS:302-1:2008(Clearances, Creepage Distances and Solid Insulation)	-	100	-
Cl.29 & IS:302-1:2008(Clearances, Creepage Distances and Solid Insulation)	-	0	-
Cl.30 & IS:302-1:2008(Resistance to Heat and Fire)	-	200	-
Cl.30.2.2 of 302-1:2008(Resistance to Heat and Fire)	-	0	-
Cl.31 & IS:302-1:2008(Resistance to Rusting.)	-	100	-
Cl.32 & IS:302-1:2008(Radition,Toxicity and similar Hazards.)	-	100	-
Cl.31 of IS:302-1:2008(Resistance to Rusting.)	-	0	-
Cl.30.2 of 302-1:2008(Resistance to Heat and Fire : Resistance to fire)	-	0	-
Cl.30.1 of IS:302-1:2008(Resistance to Heat and Fire: Resistance to heat. )	-	0	-
Cl.29.2 of IS:302-1:2008(Clearances, Creepage Distances and Solid Insulation : Creepage Distance)	-	0	-
Cl.29.1 of IS:302-1:2008(Clearances, Creepage Distances and Solid Insulation : Clearance )	-	0	-
Cl.28 of 302-1:2008(Screws and Connections.)	-	0	-
Cl.27.5 of 302-1:2008(Provision for Earthing : ECR)	-	0	-
Cl.27.1 of 302-1:2008(Provision for Earthing )	-	0	-
Cl.26 of IS 302-1:2008(Terminal for External Conductors )	-	0	-
Cl.25.20 of 302-1:2008(Supply Connection and External Flexible Cords : Additional insulation )	-	0	-
Cl.25.18 of 302-1:2008(Supply Connection and External Flexible Cords : Arrangement of cord anchorages )	-	0	-
Cl.25.15 of IS 302-1:2008(Supply Connection and External Flexible Cords : Cord grip test - displacement)	-	0	-
Cl.25.15 of IS 302-1:2008(Supply Connection and External Flexible Cords : Cord grip test - strain at terminals )	-	0	-
Cl. 25.13 of 302-1:2008(Supply Connection and External Flexible Cords : Inlet opening of supply cords )	-	0	-
Cl. 25.12 of 302-1:2008(Supply Connection and External Flexible Cords : Moulding of cords )	-	0	-
Cl.25.10 of 302-1:2008(Supply Connection and External Flexible Cords : Colour of earthing wire )	-	0	-
Cl. 25.9 of 302-1:2008(Supply Connection and External Flexible Cords : Contact with sharp edge )	-	0	-
Cl.25.8 of 302-1:2008(Supply Connection and External Flexible Cords : Resistance of supply wires )	-	0	-
Cl.25.7 of IS:302-2-30:2007(Supply Connection and External Flexible Cords : Supply cords material )	-	0	-
Cl.25.5 of 302-1:2008(Supply Connection and External Flexible Cords : Type of attachments )	-	0	-
Cl.25.1 of 302-1:2008(Supply Connection and External Flexible Cords : Means of connection )	-	0	-
Cl.24 of IS:302-2-30:2007(Component)	-	0	-
Cl.23.7 of 302-1:2008(Internal Wiring : Colour of earting conductor )	-	0	-
Cl.23 of IS:302-1:2008(Internal Wiring )	-	0	-
Cl.22.106 of IS:302-2-30:2007(Construction : Checking of thermostats, timers or similar means for visibl glowing radiant heaters)	-	0	-
Cl.22.106 of IS:302-2-30:2007(Construction : Checking of openings on the underside)	-	0	-
Cl.22.102 & Cl 22.103 of IS:302-2-30:2007(Construction : Fireguard )	-	0	-
Cl.22.101 of IS:302-2-30:2007(Construction : Prevention to contact with heating element)	-	0	-
Cl.22.24 of IS:302-2-30:2007(Construction : test of bare heating element)	-	0	-
Cl.22.18 of IS 302-1:2008(Construction : Resistance to corrosion )	-	0	-
Cl.22.15 of IS 302-1:2008(Construction : Storage hooks for flexible cords)	-	0	-
Cl.22.14 of IS 302-1:2008(Construction : ragged and sharp edges)	-	0	-
Cl.22.13 of IS 302-1:2008(Construction : Position of handles )	-	0	-
Cl.22.12 of IS 302-1:2008(Construction : Fixing of Handle, knobs,grips,lever and similer parts )	-	0	-
Cl.22.11 of IS 302-1:2008(Construction : Fixing of non detachable parts )	-	0	-
Cl.22.7 of IS:302-2-30:2007(Construction : Pressure test of oil heater )	-	0	-
Cl.21.101 of IS:302-2-30:2007(Mechanical Strength : fire gaurd deformation test )	-	0	-
Cl.21.2 of IS 302-1:2008(Mechanical Strength : Pentration by sharp implementation )	-	0	-
Cl.21.1 of IS:302-1:2008)(Mechanical Strength : Rough handling )	-	0	-
Cl.20 of IS:302-2-30:2007(Stability of Mechanical Hazards)	-	0	-
Cl.19.114 of IS:302-2-30:2007(Abnormal Operation : the temp. of the surface of the container for oil heaters )	-	0	-
Cl.19.112 of IS:302-2-30:2007(Abnormal Operation : Ignition of bleached cotton gauge)	-	0	-
Cl.19.111 of IS:302-2-30:2007(Abnormal Operation : Ignition of flannelette for Visibly glowing heaters)	-	0	-
Cl.19.110 of IS:302-2-30:2007(Abnormal Operation : operation against wall for visibly glowing radiant heaters )	-	0	-
Cl.19.109 of IS:302-2-30:2007(Abnormal Operation : operation against wall for fan heater )	-	0	-
Cl.19.106 of IS:302-2-30:2007(Abnormal Operation : Locked rotor of fan hetear )	-	0	-
Cl.19.103 , Cl 19.104 of IS:302-2-30:2007(Abnormal Operation : Operation after Covering by cotton)	-	0	-
Cl.19 of IS:302-2-30:2007(Abnormal Operation : High Voltage )	-	0	-
Cl.19 of IS:302-2-30:2007(Abnormal Operation : temp rise of supply cord )	-	0	-
Cl.19 of IS:302-2-30:2007(Abnormal Operation : Temp rise of test corner )	-	0	-
Cl.19 of IS:302-1:2008(Abnormal Operation : Emission of molten or poisonous or ignitable gas)	-	0	-
Cl.16 of IS:302-1:2008(Leakage current and Electric strength (After humidity): Electric Strentgh )	-	0	-
Cl.16 of IS:302-1:2008(Leakage current and Electric strength (After humidity): Leakage current )	-	0	-
Cl.15 of IS 302-1:2008(Moisture Resistance )	-	0	-
Cl.14 of IS:302-1:2008(Transient Over Voltages)	-	0	-
Cl.13 of IS:302-1:2008(Leakage Current of Electric Strength at operating temp. )	-	0	-
Cl.13 of IS:302-1:2008(Leakage Current of Electric Strength at operating temp. )	-	0	-
Cl.11 of IS:302-2:30: 2007(Heating : Room temperature)	-	0	-
Cl.11.8 of IS:302-2:30: 2007(Heating : For liquid filled radiators the temp. rise of the outer surface of the liquid container)	-	0	-
Cl.11 of IS:302-2:30: 2007(Heating : Temperature rise in winding)	-	0	-
Cl.11 of IS:302-2:30: 2007(Heating : Air-outlet grills)	-	0	-
Cl.11 of IS:302-2:30: 2007(Heating : Surfaces of handles, knobs, grips and similar parts)	-	0	-
Cl.11 of IS:302-2:30: 2007(Heating : Wooden supports, walls, ceiling and floor of the test corner)	-	0	-
Cl.11 of IS:302-2:30: 2007(Heating : PVC Insulation )	-	0	-
Cl.10 of IS:302-1:2008(Power Input and Current)	-	0	-
Cl.8 of IS:302-1:2008(Protection Against Access to Live Parts)	-	0	-
Cl.7.101 of IS:302-2:30: 2007(Marking and Instructions : standard mark. )	-	0	-
Cl.7.15 of IS 302-1:2008(Marking and Instructions : Visibility of marking concerning covering)	-	0	-
Cl.7.15 of IS 302-1:2008(Marking and Instructions : discernibility from the out side )	-	0	-
Cl.7.14 of IS:302-2:30: 2007(Marking and Instructions : Height of “Do not cover”)	-	0	-
Cl.7.14 of IS:302-2:30: 2007(Marking and Instructions : height of symbol)	-	0	-
Cl.7.14 of IS302-1:2008(Marking and Instructions : Legibility and durability )	-	0	-
Cl.7.13 of IS 302-1:2008(Marking and Instructions : Languge of instruction and texts )	-	0	-
Cl.7.11 of IS :302-1:2008(Marking and Instructions : Controls )	-	0	-
Cl.7.9 of IS :302-1:2008(Marking and Instructions : switches )	-	0	-
Cl.7.8 of IS :302-1:2008(Marking and Instructions : terminals )	-	0	-
Cl.7.6 of IS:302-1:2008(Marking and Instructions : Symbols )	-	0	-
Cl.7.5 of IS:302-1:2008(Marking and Instructions : upper of lower limit of the rated power input )	-	0	-
Cl 7.1 & Cl.7.6 of IS:302-2:30: 2007(Marking and Instructions : Do not cover )	-	0	-
Cl.7.1 of IS:302-1:2008(Marking and Instructions : Country of manufacture )	-	0	-
Cl.7.1 of IS:302-1:2008(Marking and Instructions : Symbol for Class-II )	-	0	-
Cl.7.1 of IS:302-1:2008(Marking and Instructions : Model or type )	-	0	-
Cl.7.1 of IS:302-1:2008(Marking and Instructions : Name , trade-mark or identification mark of the manufacturer )	-	0	-
Cl.7.1 of IS:302-1:2008(Marking and Instructions : rated power input )	-	0	-
Cl.7.1 of IS:302-1:2008(Marking and Instructions : Nature of supply )	-	0	-
Cl.7.1 of IS:302-1:2008(Marking and Instructions : Rated Voltage )	-	0	-
19.11.4.1(Electrostatic discharges)	-	0	-
19.11.4.2(Radiated fields)	-	0	-
19.11.4.3(Fast transient bursts)	-	0	-
19.11.4.4(Surge immunity test)	-	0	-
19.11.4.5(Injected currents)	-	0	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	0	-
19.11.4.7(Harmonics)	-	0	-

09 Apr, 2028

-
Included w.e.f 06.01.2026 "19.11.4.1 (Electrostatic discharges) 19.11.4.2 (Radiated fields) 19.11.4.3 (Fast transient bursts) 19.11.4.4 (Surge immunity test) 19.11.4.5 (Injected currents)) 19.11.4.6 (Class 3 Voltage dips and interruptions) 19.11.4.7 (Harmonics)"

IS 302 : Part 2 : Sec 201 (2008)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 201 electric immersion water heaters (First Revision)

All Grade / Type / Size / Designation

6900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.6 of IS 302-‐2-‐201:2008(Classification)	-	200	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	300	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.8 of IS 302‐2-201: 2008(Protection Against Access to Live Parts)	-	200	-
Cl.10 of IS 302‐2‐201:2008(Power Input and Current )	-	300	-
Cl.11 of IS 302-2201: 2008(Heating)	-	500	-
Cl.11 of IS 302-2201: 2008(Heating)	-	0	-
Cl.11 of IS 302-2201: 2008(Heating)	-	0	-
Cl.11 of IS 302-2201: 2008(Heating)	-	0	-
Cl.11 of IS 302-2201: 2008(Heating)	-	0	-
Cl.11 of IS 302-2201: 2008(Heating)	-	0	-
Cl.11 of IS 302-2201: 2008(Heating)	-	0	-
Cl.11 of IS 302-2201: 2008(Heating)	-	0	-
Cl.11 of IS 302-2201: 2008(Heating)	-	0	-
Cl.11 of IS 302-2201: 2008(Heating)	-	0	-
Cl.11 of IS 302-2201: 2008(Heating)	-	0	-
Cl.13 of IS 302-2-201: 2008(Leakage Current & Electric Strength at Operating Temperature)	-	300	-
Cl.14 of IS 302‐2-201:2008(Transient Over Voltages )	-	200	-
Cl.15 of IS 302-2-201:2008(Moisture Resistance )	-	500	-
Cl.15 of IS 302-2-201:2008(Moisture Resistance )	-	0	-
Cl.16 of IS 302-2-201:2008(Leakage Current & Electric Strength)	-	300	-
Cl.16 of IS 302-2-201:2008(Leakage Current & Electric Strength)	-	0	-
Cl.17 of IS 302‐2-201: 2008(Overload Protection of Transformers & Associated Circuits)	-	200	-
Cl.19 of IS 302‐2-201: 2008(Abnormal Operation )	-	500	-
Cl.19 of IS 302‐2-201: 2008(Abnormal Operation )	-	0	-
Cl.19 of IS 302‐2-201: 2008(Abnormal Operation )	-	0	-
Cl.19 of IS 302‐2-201: 2008(Abnormal Operation )	-	0	-
Cl.20 of IS 302-2-201: 2008(Stability & Mechanical Hazards)	-	200	-
Cl.21 of IS 302-2-201: 2008(Mechanical Strength )	-	200	-
Cl.21 of IS 302-2-201: 2008(Mechanical Strength )	-	0	-
Cl.21 of IS 302-2-201: 2008(Mechanical Strength )	-	0	-
Cl.22 of IS 302-2-201: 2008(Construction)	-	300	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	300	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	0	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	0	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	0	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	0	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	0	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	0	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	0	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	0	-
Cl.24 of IS 302-2-201: 2008(Component)	-	200	-
Cl.24 of IS 302-2-201: 2008(Component)	-	0	-
Cl.24 of IS 302-2-201: 2008(Component)	-	0	-
Cl.24 of IS 302-2-201: 2008(Component)	-	0	-
Cl.24 of IS 302-2-201: 2008(Component)	-	0	-
Cl.24 of IS 302-2-201: 2008(Component)	-	0	-
Cl.24 of IS 302-2-201: 2008(Component)	-	0	-
Cl.24 of IS 302-2-201: 2008(Component)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	200	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.26 of IS 302-2-201: 2008(Terminals for External Conductors)	-	200	-
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	200	-
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	0	-
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	0	-
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	0	-
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	0	-
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	0	-
Cl.28 of IS 302-2-201: 2008(Screws & Connections )	-	200	-
Cl.29 of IS 302-2‐201:2008(Clearances, Creepage Distances and Solid Insulation )	-	200	-
Cl.30 of IS 302-2‐201:2008(Resistance to Heat and Fire )	-	400	-
Cl.31 of IS 302-2-201:2008(Resistance of Rusting )	-	200	-
Cl.32 of IS 302-2-201:2008(Radiation, Toxicity and Similar Hazards)	-	200	-
19.11.4.7(Harmonics)	-	0	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	0	-
19.11.4.5(Immunity to conducted discharges)	-	0	-
19.11.4.4(Surge immunity test)	-	0	-
19.11.4.3(Fast transient bursts)	-	0	-
19.11.4.2(Radiated fields)	-	0	-
19.11.4.1(Electrostatic discharges)	-	0	-
4(GENERAL REQUIREMENTS)	-	200	-
5(GENERAL CONDITIONS FOR THE TESTS)	-	200	-
Cl.24 of IS 302-2-201: 2008(Component)	-	0	-

09 Apr, 2028

IS 302 : Part 2 : Sec 24 (1994)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 24 refrigerators, food - Freezers and ice - Makers

All Grade / Type / Size / Designation

49800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
32(Radiation, toxicity and similar hazards)	-	300	-
31(Resistance to rusting)	-	300	-
30.3(Resistance to heat and fire)	-	300	-
30.2(Resistance to heat and fire)	-	300	-
30.1(Resistance to heat and fire)	-	300	-
30.1(Resistance to heat and fire)	-	300	-
29.2 & 29.3(Clearances, creepage distances )	-	300	-
29.1 and table 2(creepage and Clearances distances )	-	300	-
28.2 to 28.4(Screws and connections)	-	100	-
28.1, Table No.-14(Screws and connections)	-	200	-
27.5(Provision for earthing)	-	300	-
27.1 to 27.4(Provision for earthing)	-	300	-
26.10 & 26.13(Terminals for external conductors)	-	300	-
26.9(Terminals for external conductors)	-	300	-
26.1 to 26.8(Terminals for external conductors)	-	300	-
25.7 to 25.13(Supply connection and external flexible cords)	-	300	-
25.6(Supply connection and external flexible cords)	-	300	-
25.4(Supply connection and external flexible cords)	-	300	-
25.4(Supply connection and external flexible cords)	-	300	-
25.3(Supply connection and external flexible cords)	-	300	-
25.2(Supply connection and external flexible cords)	-	300	-
25.1(Supply connection and external flexible cords)	-	300	-
24.2 ,24.3,24.5 & 24.6(Components)	-	300	-
24.1(Components)	-	300	-
23.5 to 23.8(Internal wiring)	-	300	-
23.4(Internal wiring)	-	300	-
23.3(Internal wiring)	-	300	-
23.1 & 23.2(Internal wiring)	-	300	-
22.101 to 22.103(Constructions)	-	300	-
22.13 to 22.33(Constructions)	-	300	-
22.12(Constructions)	-	300	-
22.11(Constructions)	-	300	-
22.7 to 22.10(Constructions)	-	300	-
22.6(Constructions)	-	300	-
22.5(Constructions)	-	300	-
22.4(Constructions)	-	300	-
22.3(Constructions)	-	300	-
22.2(Constructions)	-	300	-
22.1(Constructions)	-	300	-
21.2(MECHANICAL STRENGTH)	-	300	-
21.1(MECHANICAL STRENGTH)	-	300	-
20.2(Stability and mechanical hazards)	-	300	-
20.1(Stability and mechanical hazards)	-	300	-
19.103(ABNORMAL OPERATION)	-	300	-
19.102(ABNORMAL OPERATION)	-	300	-
19.101(ABNORMAL OPERATION)	-	300	-
19.11(ABNORMAL OPERATION)	-	300	-
19.9(ABNORMAL OPERATION)	-	300	-
19.7(ABNORMAL OPERATION)	-	300	-
19(ABNORMAL OPERATION)	-	300	-
17(Over load Protection )	-	300	-
16.4(INSULATION RESISTANCE AND ELECTRIC STRENGTH ( After the Humidity Treatment ))	-	300	-
16.3 & table(INSULATION RESISTANCE AND ELECTRIC STRENGTH ( After the Humidity Treatment ))	-	300	-
16.2(INSULATION RESISTANCE AND ELECTRIC STRENGTH ( After the Humidity Treatment ))	-	300	-
16 & 16.1(INSULATION RESISTANCE AND ELECTRIC STRENGTH ( After the Humidity Treatment ))	-	300	-
15.103(Moisture resistance)	-	300	-
15.102(Moisture resistance)	-	300	-
15.101(Moisture resistance)	-	300	-
15.4(Moisture resistance)	-	300	-
15.3(Moisture resistance)	-	300	-
15.2(Moisture resistance)	-	300	-
15(Moisture resistance)	-	300	-
14( RADIO AND TELEVISION INTERFERENCE SUPPRESSION )	-	300	-
13(ELECTRICAL INSULATION AND LEAKAGE CURRENT AT OPERATING TEMPERATURE)	-	300	-
12,12.1,12.2 & 12.3(Heating)	-	300	-
11.103(TEMPERATURE RISE)	-	300	-
11.102(TEMPERATURE RISE)	-	300	-
11.101(TEMPERATURE RISE)	-	300	-
11.1(TEMPERATURE RISE)	-	300	-
11.8(TEMPERATURE RISE)	-	300	-
11.7(TEMPERATURE RISE)	-	300	-
11.6(TEMPERATURE RISE)	-	300	-
11.5(TEMPERATURE RISE)	-	300	-
11.4(TEMPERATURE RISE)	-	300	-
11.2(TEMPERATURE RISE)	-	300	-
11(TEMPERATURE RISE)	-	300	-
10.1,10.2 10.101,10.102( Input and Current)	-	300	-
9.2(Startability Test)	-	300	-
9.1(Startability Test)	-	300	-
9(Starting of motor operated Appliances)	-	300	-
8.1.5(Protection against access to live parts)	-	300	-
8.1.4(Protection against access to live parts)	-	300	-
8.1.3(Protection against access to live parts)	-	300	-
8.1.2(Protection against access to live parts)	-	300	-
8.1, 8.1.1 & 8.2(Protection against access to live parts)	-	300	-
7.1 , 7.12, 7.14,7.15(Marking)	-	300	-
32(Radiation, toxicity and similar hazards)	-	300	-
31(Resistance to rusting)	-	300	-
30.3(Resistance to heat and fire)	-	300	-
30.2(Resistance to heat and fire)	-	300	-
30.1(Resistance to heat and fire)	-	300	-
30.1(Resistance to heat and fire)	-	300	-
29.2 & 29.3(Clearances, creepage distances )	-	300	-
29.1 and table 2(creepage and Clearances distances )	-	300	-
28.2 to 28.4(Screws and connections)	-	300	-
28.1, Table No.-14(Screws and connections)	-	300	-
27.5(Provision for earthing)	-	300	-
27.1 to 27.4(Provision for earthing)	-	300	-
26.10 & 26.13(Terminals for external conductors)	-	300	-
26.9(Terminals for external conductors)	-	300	-
26.1 to 26.8(Terminals for external conductors)	-	300	-
25.7 to 25.13(Supply connection and external flexible cords)	-	300	-
25.6(Supply connection and external flexible cords)	-	300	-
25.4(Supply connection and external flexible cords)	-	300	-
25.4(Supply connection and external flexible cords)	-	300	-
25.3(Supply connection and external flexible cords)	-	300	-
25.2(Supply connection and external flexible cords)	-	300	-
25.1(Supply connection and external flexible cords)	-	300	-
24.2 ,24.3,24.5 & 24.6(Components)	-	300	-
24.1(Components)	-	300	-
23.5 to 23.8(Internal wiring)	-	300	-
23.4(Internal wiring)	-	300	-
23.3(Internal wiring)	-	300	-
23.1 & 23.2(Internal wiring)	-	300	-
22.101 to 22.103(Constructions)	-	300	-
22.13 to 22.33(Constructions)	-	300	-
22.12(Constructions)	-	300	-
22.11(Constructions)	-	300	-
22.7 to 22.10(Constructions)	-	300	-
22.6(Constructions)	-	300	-
22.5(Constructions)	-	300	-
22.4(Constructions)	-	300	-
22.3(Constructions)	-	300	-
22.2(Constructions)	-	300	-
22.1(Constructions)	-	300	-
21.2(MECHANICAL STRENGTH)	-	100	-
21.1(MECHANICAL STRENGTH)	-	100	-
20.2(Stability and mechanical hazards)	-	100	-
20.1(Stability and mechanical hazards)	-	100	-
19.103(ABNORMAL OPERATION)	-	300	-
19.102(ABNORMAL OPERATION)	-	300	-
19.101(ABNORMAL OPERATION)	-	300	-
19.11(ABNORMAL OPERATION)	-	300	-
19.9(ABNORMAL OPERATION)	-	300	-
19.7(ABNORMAL OPERATION)	-	300	-
19(ABNORMAL OPERATION)	-	300	-
17(Over load Protection )	-	300	-
16.4(INSULATION RESISTANCE AND ELECTRIC STRENGTH ( After the Humidity Treatment ))	-	200	-
16.3 & table(INSULATION RESISTANCE AND ELECTRIC STRENGTH ( After the Humidity Treatment ))	-	200	-
16.2(INSULATION RESISTANCE AND ELECTRIC STRENGTH ( After the Humidity Treatment ))	-	200	-
16 & 16.1(INSULATION RESISTANCE AND ELECTRIC STRENGTH ( After the Humidity Treatment ))	-	200	-
15.103(Moisture resistance)	-	300	-
15.102(Moisture resistance)	-	300	-
15.101(Moisture resistance)	-	300	-
15.4(Moisture resistance)	-	300	-
15.3(Moisture resistance)	-	300	-
15.2(Moisture resistance)	-	300	-
15(Moisture resistance)	-	300	-
14( RADIO AND TELEVISION INTERFERENCE SUPPRESSION )	-	100	-
13(ELECTRICAL INSULATION AND LEAKAGE CURRENT AT OPERATING TEMPERATURE)	-	200	-
12,12.1,12.2 & 12.3(Heating)	-	300	-
11.103(TEMPERATURE RISE)	-	300	-
11.102(TEMPERATURE RISE)	-	300	-
11.101(TEMPERATURE RISE)	-	300	-
11.1(TEMPERATURE RISE)	-	300	-
11.8(TEMPERATURE RISE)	-	300	-
11.7(TEMPERATURE RISE)	-	300	-
11.6(TEMPERATURE RISE)	-	300	-
11.5(TEMPERATURE RISE)	-	300	-
11.4(TEMPERATURE RISE)	-	300	-
11.2(TEMPERATURE RISE)	-	300	-
11(TEMPERATURE RISE)	-	300	-
10.1,10.2 10.101,10.102( Input and Current)	-	300	-
9.2(Startability Test)	-	300	-
9.1(Startability Test)	-	300	-
9(Starting of motor operated Appliances)	-	300	-
8.1.5(Protection against access to live parts)	-	300	-
8.1.4(Protection against access to live parts)	-	300	-
8.1.3(Protection against access to live parts)	-	300	-
8.1.2(Protection against access to live parts)	-	300	-
8.1, 8.1.1 & 8.2(Protection against access to live parts)	-	300	-
7.1 , 7.12, 7.14,7.15(Marking)	-	100	-
19.11.4.1(Electrostatic discharges)	-	0	-
19.11.4.2(Radiated fields)	-	0	-
19.11.4.3(Fast transient bursts)	-	0	-
19.11.4.4(Surge immunity test)	-	0	-
19.11.4.5(Immunity to conducted discharges)	-	0	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	0	-
19.11.4.7(Harmonics)	-	0	-
6(Classifications)	-	100	-
6(Classifications)	-	100	-

09 Apr, 2028

-
Included w.e.f 31.12.2025 Exclusion: Cl 19.11.4.1-19.11.4.7(EMI/EMC)

IS 302 : Part 2 : Sec 15 (2009)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 15 appliances for heating liquids (First Revision)

All Grade / Type / Size / Designation

9900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.0(Classification)	-	300	-
7(Marking and instructions)	-	300	-
8(Protection against live parts)	-	250	-
9(STARTING OF MOTOR-OPERATED APPLIANCES)	-	0	-
10(POWER INPUT AND CURRENT)	-	400	-
11(HEATING)	-	500	-
13(LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE)	-	500	-
14(TRANSIENT OVERVOLTAGES)	-	400	-
15(MOISTURE RESISTANCE)	-	500	-
16(LEAKAGE CURRENT AND ELECTRIC STRENGTH)	-	200	-
17(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	300	-
18(ENDURANCE)	-	0	-
19(ABNORMAL OPERATION)	-	300	-
20(STABILITY AND MECHANICAL HAZARDS)	-	300	-
21(MECHANICAL STRENGTH)	-	500	-
22(CONSTRUCTION)	-	300	-
23(INTERNAL WIRING)	-	300	-
24(COMPONENTS)	-	300	-
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CORDS)	-	400	-
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	450	-
27(PROVISION FOR EARTHING)	-	300	-
28(SCREWS AND CONNECTIONS)	-	500	-
29(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION)	-	500	-
30(RESISTANCE TO HEAT AND FIRE)	-	500	-
31(RESISTANCE TO RUSTING)	-	500	-
32(RADIATION, TOXICITY AND SIMILAR HAZARDS)	-	300	-
22.16(Automatic cord reel)	-	0	-
22.32(Oxygen bomb for rubber material)	-	0	-
22.47(Water pressure inlet)	-	0	-
22.106(Interlocks)	-	0	-
22.3(Flexing test)	-	0	-
24(Components)	-	0	-
19.11.4.1(Electrostatic discharges)	-	0	-
19.11.4.2(Radiated fields)	-	0	-
19.11.4.3(Fast transient bursts)	-	0	-
19.11.4.4(Surge immunity test)	-	0	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	0	-
19.11.4.7(Harmonics)	-	0	-
4(General requirements)	-	400	-
5(General Conditions of tests)	-	400	-
19.11.4.5(Immunity to conducted discharges)	-	0	-
6(Classification- IS 302-1)	-	0	-
6(Classification- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-2-15)	-	0	-
7.3(Marking- IS 302-1)	-	0	-
7.4(Marking- IS 302-1)	-	0	-
7.5(Marking- IS 302-1)	-	0	-
7.6(Marking- IS 302-1)	-	0	-
7.7(Marking- IS 302-1)	-	0	-
7.8(Marking- IS 302-1)	-	0	-
6(Classification- IS 302-1)	-	0	-
6(Classification- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
Marking- IS 302-1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-2-15)	-	0	-
7.3(Marking- IS 302-1)	-	0	-
7.4(Marking- IS 302-1)	-	0	-
7.5(Marking- IS 302-1)	-	0	-
7.6(Marking- IS 302-1)	-	0	-
7.7(Marking- IS 302-1)	-	0	-
7.8(Marking- IS 302-1)	-	0	-
7.9(Marking- IS 302-1)	-	0	-
7.1O(Marking- IS 302-1)	-	0	-
7.11(Marking- IS 302-1)	-	0	-
7.12(Marking- IS 302-2-15)	-	0	-
7.12(Marking- IS 302-1)	-	0	-
7.12.1(Marking- IS 302-1)	-	0	-
7.12.3(Marking- IS 302-1)	-	0	-
7.12.5(Marking- IS 302-1)	-	0	-
7.12.6(Marking- IS 302-1)	-	0	-
7.13(Marking- IS 302-1)	-	0	-
7.14(Marking- IS 302-1)	-	0	-
7.15(Marking- IS 302-1)	-	0	-
7.101(Marking- IS 302-2-15)	-	0	-
8(Protection Against Electric Shock, IS 302-1)	-	0	-
10(Power Input and Current, IS 302-1)	-	0	-
11(Heating, IS 302-1)	-	0	-
11(Heating, IS 302-1)	-	0	-
11(Heating, IS 302-1)	-	0	-
11(Heating, IS 302-1)	-	0	-
13(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	0	-
13(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	0	-
15.1(Moisture Resistance, IS 302-1)	-	0	-
15.2(Spillage test as 15.2, IS 3.02-1 & 302-2-15)	-	0	-
16(Leakage current as per Cl 16, IS 302-1)	-	0	-
16(electric strength as per Cl 16, IS 302-1)	-	0	-
17(Overload protection of Transformers and Associated Circuits, IS 302-1)	-	0	-
19.13(Abnormal Operation as per Cl 19, IS 302-2-15)	-	0	-
19.13(Abnormal Operation as per Cl 19, IS 302-1)	-	0	-
19.13(Abnormal Operation as per Cl 19, IS 302-1)	-	0	-
19.13(Abnormal Operation as per Cl 19, IS 302-1)	-	0	-
20.1(Stability & Mechanical Hazards, IS 302-1)	-	0	-
21.1(Mechanical Strength, IS 302-1)	-	0	-
21.2(Mechanical Strength, IS 302-1)	-	0	-
22.1(Construction, IS 302-1)	-	0	-
22.7(Construction as per Cl 22.7, IS 3.02-2-15)	-	0	-
22.107(Construction as per Cl 22.7, IS 3.02-2-15)	-	0	-
22.108(Construction as per Cl 22.8, IS 3.02-2-15)	-	0	-
23.1(Internal Wiring, IS 302-1)	-	0	-
23.2(Internal Wiring, IS 302-1)	-	0	-
23.4(Internal Wiring, IS 302-1)	-	0	-
23.5(Internal Wiring, IS 302-1)	-	0	-
23.6(Internal Wiring, IS 302-1)	-	0	-
23.7(Internal Wiring, IS 302-1)	-	0	-
23.8(Internal Wiring, IS 302-1)	-	0	-
23.9(Internal Wiring, IS 302-1)	-	0	-
23.1O(Internal Wiring, IS 302-1)	-	0	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.2(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.5(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.6(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.9(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.11(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.12(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.13(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.16(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.17(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.18(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.19(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.2(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.21(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.22(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
26(Terminals for External Conductors, IS 302-1)	-	0	-
27.1(Provision for Earthing, IS 302-1)	-	0	-
27.2(Provision for Earthing, IS 302-1)	-	0	-
27.3(Provision for Earthing, IS 302-1)	-	0	-
27.4(Provision for Earthing, IS 302-1)	-	0	-
27.5(Provision for Earthing, IS 302-1)	-	0	-
28(Screws & Connections, IS 302-1)	-	0	-
29.1(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	0	-
29.2(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	0	-
30.1(Resistance to Heat and Fire, IS 302-1)	-	0	-
30.2(Resistance to Heat and Fire, IS 302-1)	-	0	-
31(Resistance of Rusting, IS 302-1)	-	0	-
Cl. 15.02(stands for cordless kettles)	-	0	-
Cl.22.103(appliance coupler of cordless kettles)	-	0	-
Cl-19.3(Abnormal operation test)	-	0	-
Cl-19.101("Abnormal operation test ")	-	0	-
Cl-19.102("Abnormal operation test ")	-	0	-
Cl-19.103("Abnormal operation test ")	-	0	-
Cl-22.103(Construction)	-	0	-
Cl-25.101(" Supply connection And external flexible ")	-	0	-

09 Apr, 2028

-
Included w.e.f 31.12.2025 Exclusion: Cl 19.11.4.1-19.11.4.7(EMI/EMC)

IS 302 : Part 2 : Sec 42 (2024)

Household and Similar Electrical Appliancesï¿½Safety Part 2 Particular Requirements Section 42 Commercial electric forced convection ovens, steam cookers and steam-convection ovens

All Grade / Type / Size / Designation

31000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking and instructions)	-	400	-
8(Protection against access to live parts)	-	500	-
10(Power input and current)	-	500	-
11(Heating)	-	500	-
13.1 &13.2(Leakage current test)	-	500	-
13.1 &13.3(Electric strength test)	-	500	-
14(Transient overvoltages)	-	1100	-
15(Moisture resistance)	-	500	-
15.3(Moisture resistance)	-	500	-
15.101(Moisture resistance)	-	500	-
16.1 &16.2(Leakage current test)	-	500	-
16.1 & 16.3(Electric strength test)	-	500	-
17(Overload protection of transformers and associated circuits)	-	500	-
19.1 to 19.13, Table No. - 9(Abnormal operation)	-	500	-
19.101(Abnormal operation)	-	500	-
20.1(Stability and mechanical hazards)	-	250	-
20.2(Stability and mechanical hazards)	-	250	-
20.101(Stability and mechanical hazards)	-	250	-
20.102(Stability and mechanical hazards)	-	250	-
21(Mechanical strength)	-	500	-
21.101(Mechanical strength)	-	500	-
22(Construction)	-	300	-
22.101(Construction)	-	300	-
22.102(Construction)	-	300	-
22.103(Construction)	-	300	-
22.104(Construction)	-	300	-
22.105(Construction)	-	300	-
22.106(Construction)	-	300	-
22.107(Construction)	-	300	-
22.108(Construction)	-	300	-
22.109(Construction)	-	300	-
22.109(Construction)	-	300	-
22.110(Construction)	-	300	-
22.111(Construction)	-	300	-
22.112(Construction)	-	300	-
22.113(Construction)	-	300	-
22.114(Construction)	-	300	-
22.115(Construction)	-	300	-
22.116(Construction)	-	300	-
22.117(Construction)	-	300	-
22.118(Construction)	-	300	-
22.119(Construction)	-	300	-
23(Internal wiring)	-	1000	-
24(Components)	-	500	-
25("Supply connection and external flexible cords")	-	500	-
26("Terminals for external conductors")	-	700	-
27(Provision for earthing)	-	1000	-
28(Screws and connections)	-	1500	-
29("Clearances, creepage distances and solid insulation")	-	1500	-
30(Resistance to heat and fire)	-	2500	-
30.101(Resistance to heat and fire)	-	2500	-
31(Resistance to rusting)	-	2000	-
32("Radiation, toxicity and similar hazards")	-	1000	-
7(Marking and instructions)	-	0	-
8(Protection against access to live parts)	-	0	-
10(Power input and current)	-	0	-
11(Heating)	-	0	-
13.1 &13.2(Leakage current test)	-	0	-
13.1 &13.3(Electric strength test)	-	0	-
14(Transient overvoltages)	-	0	-
15(Moisture resistance)	-	0	-
15.3(Moisture resistance)	-	0	-
15.101(Moisture resistance)	-	0	-
16.1 &16.2(Leakage current test)	-	0	-
16.1 & 16.3(Electric strength test)	-	0	-
17(Overload protection of transformers and associated circuits)	-	0	-
19.1 to 19.13, Table No. - 9(Abnormal operation)	-	0	-
19.101(Abnormal operation)	-	0	-
20.1(Stability and mechanical hazards)	-	0	-
20.2(Stability and mechanical hazards)	-	0	-
20.101(Stability and mechanical hazards)	-	0	-
20.102(Stability and mechanical hazards)	-	0	-
21(Mechanical strength)	-	0	-
21.101(Mechanical strength)	-	0	-
22(Construction)	-	0	-
22.101(Construction)	-	0	-
22.102(Construction)	-	0	-
22.103(Construction)	-	0	-
22.104(Construction)	-	0	-
22.105(Construction)	-	0	-
22.106(Construction)	-	0	-
22.107(Construction)	-	0	-
22.108(Construction)	-	0	-
22.109(Construction)	-	0	-
22.109(Construction)	-	0	-
22.110(Construction)	-	0	-
22.111(Construction)	-	0	-
22.112(Construction)	-	0	-
22.113(Construction)	-	0	-
22.114(Construction)	-	0	-
22.115(Construction)	-	0	-
22.116(Construction)	-	0	-
22.117(Construction)	-	0	-
22.118(Construction)	-	0	-
22.119(Construction)	-	0	-
23(Internal wiring)	-	0	-
24(Components)	-	0	-
25("Supply connection and external flexible cords")	-	0	-
26("Terminals for external conductors")	-	0	-
27(Provision for earthing)	-	0	-
28(Screws and connections)	-	0	-
29("Clearances, creepage distances and solid insulation")	-	0	-
30(Resistance to heat and fire)	-	0	-
30.101(Resistance to heat and fire)	-	0	-
31(Resistance to rusting)	-	0	-
32("Radiation, toxicity and similar hazards")	-	0	-
7(Marking and instructions)	-	0	-
8(Protection against access to live parts)	-	0	-
10(Power input and current)	-	0	-
11(Heating)	-	0	-
13.1 &13.2(Leakage current test)	-	0	-
13.1 &13.3(Electric strength test)	-	0	-
14(Transient overvoltages)	-	0	-
15(Moisture resistance)	-	0	-
15.3(Moisture resistance)	-	0	-
15.101(Moisture resistance)	-	0	-
16.1 &16.2(Leakage current test)	-	0	-
16.1 & 16.3(Electric strength test)	-	0	-
17(Overload protection of transformers and associated circuits)	-	0	-
19.1 to 19.13, Table No. - 9(Abnormal operation)	-	0	-
19.101(Abnormal operation)	-	0	-
20.1(Stability and mechanical hazards)	-	0	-
20.2(Stability and mechanical hazards)	-	0	-
20.101(Stability and mechanical hazards)	-	0	-
20.102(Stability and mechanical hazards)	-	0	-
21(Mechanical strength)	-	0	-
21.101(Mechanical strength)	-	0	-
22(Construction)	-	0	-
22.101(Construction)	-	0	-
22.102(Construction)	-	0	-
22.103(Construction)	-	0	-
22.104(Construction)	-	0	-
22.105(Construction)	-	0	-
22.106(Construction)	-	0	-
22.107(Construction)	-	0	-
22.108(Construction)	-	0	-
22.109(Construction)	-	0	-
22.109(Construction)	-	0	-
22.110(Construction)	-	0	-
22.111(Construction)	-	0	-
22.112(Construction)	-	0	-
22.113(Construction)	-	0	-
22.114(Construction)	-	0	-
22.115(Construction)	-	0	-
22.116(Construction)	-	0	-
22.117(Construction)	-	0	-
22.118(Construction)	-	0	-
22.119(Construction)	-	0	-
23(Internal wiring)	-	0	-
24(Components)	-	0	-
25("Supply connection and external flexible cords")	-	0	-
26("Terminals for external conductors")	-	0	-
27(Provision for earthing)	-	0	-
28(Screws and connections)	-	0	-
29("Clearances, creepage distances and solid insulation")	-	0	-
30(Resistance to heat and fire)	-	0	-
30.101(Resistance to heat and fire)	-	0	-
31(Resistance to rusting)	-	0	-
32("Radiation, toxicity and similar hazards")	-	0	-

09 Apr, 2028

-
Included w.e.f. 19.12.2025 Exclusion: 19.1 to 19.13, Table No. - 9 (Abnormal operation)

IS 302 : Part 2 : Sec 8 (2024)

Household and Similar Electrical Appliances âSafety Part 2 Particular Requirements Section 8 Shavers, Hair Clippers and Similar Appliances (First Revision)

All grade / Type / Size / Designation

23400 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking and instructions)	-	500	-
8(Protection against access to live parts)	-	500	-
10(Power input and current)	-	1000	-
11(Heating)	-	1000	-
12(Charging of metal-ion batteries)	-	1000	-
13.1 &13.2(Leakage current test)	-	500	-
13.1 &13.3(Electric strength test)	-	500	-
14(Transient overvoltages)	-	500	-
15(Moisture resistance)	-	1000	-
15.3(Moisture resistance)	-	1000	-
16.1 &16.2(Leakage current test)	-	400	-
16.1 & 16.3(Electric strength test)	-	500	-
17(Overload protection of transformers and associated circuits)	-	500	-
19.1 to 19.13, Table No. - 9(Abnormal operation)	-	1000	-
19.101(Abnormal operation)	-	500	-
20.1(Stability and mechanical hazards)	-	500	-
20.2(Stability and mechanical hazards)	-	500	-
21(Mechanical strength)	-	1000	-
21.101(Mechanical strength)	-	500	-
21.102(Mechanical strength)	-	500	-
21.103(Mechanical strength)	-	500	-
22(Construction)	-	1000	-
22.101(Construction)	-	500	-
22.102(Construction)	-	500	-
22.103(Construction)	-	500	-
23(Internal wiring)	-	1000	-
24(Components)	-	1000	-
25("Supply connection and external flexible cords")	-	500	-
26("Terminals for external conductors")	-	1000	-
27(Provision for earthing)	-	500	-
28(Screws and connections)	-	500	-
29("Clearances, creepage distances and solid insulation")	-	500	-
30(Resistance to heat and fire)	-	1000	-
31(Resistance to rusting)	-	500	-
32("Radiation, toxicity and similar hazards")	-	500	-
19.11.4.1(Electrostatic discharges)	-	0	-
19.11.4.2(Radiated fields)	-	0	-
19.11.4.3(Fast transient bursts)	-	0	-
19.11.4.4(Surge immunity test)	-	0	-
19.11.4.5(Immunity to conducted discharges)	-	0	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	0	-
19.11.4.7(Harmonics)	-	0	-

09 Apr, 2028

-
Included w.e.f. 19.12.2025 "19.11.4.1 (Electrostatic discharges) 19.11.4.2 (Radiated fields) 19.11.4.3 (Fast transient bursts) 19.11.4.4 (Surge immunity test) 19.11.4.5 (Immunity to conducted discharges) 19.11.4.6 (Class 3 Voltage dips and interruptions) 19.11.4.7 (Harmonics) 19.11.4.5 (Immunity to conducted discharges) "

IS 302 : Part 2 : Sec 59 (2024)

Household and Similar Electrical Appliances â Safety Part 2 Particular Requirements Section 59 Insect Killers (First Revision)

All grade / Type / Size / Designation etc.

34900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(General)	-	1000	-
5(General conditions for the tests)	-	1000	-
6(Classification)	-	1000	-
7(Marking and instructions)	-	1000	-
8("8 PROTECTION AGAINST ELECTRIC SHOCK ")	-	1000	-
10(Power input and current)	-	1000	-
11(Heating)	-	1000	-
11.3(Heating)	-	1000	-
11.7(Heating)	-	1000	-
11.8(Heating)	-	1000	-
12(Charging of metal-ion batteries)	-	2000	-
13(Leakage current and electric strength at operating temperature)	-	1000	-
14(Transient overvoltages)	-	1000	-
15(MOISTURE RESISTANCE)	-	3000	-
16(Leakage current and electric strength)	-	1000	-
17(Overload protection of transformers and associated circuits)	-	1000	-
19(ABNORMAL OPERATION)	-	3000	-
19.11.4.1(Electrostatic discharges)	-	0	-
19.11.4.2(Radiated fields)	-	0	-
19.11.4.3(Fast transient bursts)	-	0	-
19.11.4.4(Voltage surges)	-	0	-
19.11.4.5(Injected currents)	-	0	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	0	-
19.11.4.7(Mains signals)	-	0	-
20("STABILITY AND MECHANICAL HAZARDS")	-	1000	-
21(MECHANICAL STRENGTH)	-	1000	-
22(CONSTRUCTION)	-	1000	-
23(INTERNAL WIRING)	-	1000	-
24(COMPONENTS)	-	1000	-
25("SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CABLES AND CORDS ")	-	1000	-
26("TERMINALS FOR EXTERNAL CONDUCTORS")	-	1000	-
27(PROVISION FOR EARTHING)	-	1000	-
28(SCREWS AND CONNECTIONS)	-	1000	-
30("RESISTANCE TO HEAT, FIRE AND TRACKING ")	-	1500	-
31(RESISTANCE TO RUSTING)	-	1400	-
32(Radiation, toxicity and similar hazards)	-	0	-
29(Clearances, creepage distances and solid insulation)	-	1000	-
4(General)	-	0	-
5(General conditions for the tests)	-	0	-
6(Classification)	-	0	-
7(Marking and instructions)	-	0	-
8("8 PROTECTION AGAINST ELECTRIC SHOCK ")	-	0	-
10(Power input and current)	-	0	-
11(Heating)	-	0	-
11.3(Heating)	-	0	-
11.7(Heating)	-	0	-
11.8(Heating)	-	0	-
12(Charging of metal-ion batteries)	-	0	-
13(Leakage current and electric strength at operating temperature)	-	0	-
14(Transient overvoltages)	-	0	-
15(MOISTURE RESISTANCE)	-	0	-
16(Leakage current and electric strength)	-	0	-
17(Overload protection of transformers and associated circuits)	-	0	-
19(ABNORMAL OPERATION)	-	0	-
19.11.4.1(Electrostatic discharges)	-	0	-
19.11.4.2(Radiated fields)	-	0	-
19.11.4.3(Fast transient bursts)	-	0	-
19.11.4.4(Voltage surges)	-	0	-
19.11.4.5(Injected currents)	-	0	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	0	-
19.11.4.7(Mains signals)	-	0	-
20("STABILITY AND MECHANICAL HAZARDS")	-	0	-
21(MECHANICAL STRENGTH)	-	0	-
22(CONSTRUCTION)	-	0	-
23(INTERNAL WIRING)	-	0	-
24(COMPONENTS)	-	0	-
25("SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CABLES AND CORDS ")	-	0	-
26("TERMINALS FOR EXTERNAL CONDUCTORS")	-	0	-
27(PROVISION FOR EARTHING)	-	0	-
28(SCREWS AND CONNECTIONS)	-	0	-
30("RESISTANCE TO HEAT, FIRE AND TRACKING ")	-	0	-
31(RESISTANCE TO RUSTING)	-	0	-
32(Radiation, toxicity and similar hazards)	-	0	-
29(Clearances, creepage distances and solid insulation)	-	0	-

09 Apr, 2028

-
Included w.e.f 06.01.2026 "19.11.4.1 (Electrostatic discharges) 19.11.4.2 (Radiated fields) 19.11.4.3 (Fast transient bursts) 19.11.4.4 Voltage surges) 19.11.4.5 (Injected currents)) 19.11.4.6 (Class 3 Voltage dips and interruptions) 19.11.4.7 (Mains signals) 32 (Radiation, toxicity and similar hazards)"

IS 302 : Part 2 : Sec 13 (2024)

Household and Similar Electrical Appliances âSafety Part 2 Particular Requirements Section 13 Deep Fat Fryers, Frying Pans and Similar Appliances (First Revision)

All grade / Type / Size / Designation

19900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking and instructions)	-	700	-
8(Protection against access to live parts)	-	700	-
10(Power input and current)	-	1000	-
11(Heating)	-	1000	-
13.1 &13.2(Leakage current test)	-	500	-
13.1 &13.3(Electric strength test)	-	500	-
14(Transient overvoltages)	-	500	-
15(Moisture resistance)	-	500	-
15.3(Moisture resistance)	-	500	-
15.101(Moisture resistance)	-	500	-
16.1 &16.2(Leakage current test)	-	500	-
16.1 & 16.3(Electric strength test)	-	500	-
17(Overload protection of transformers and associated circuits)	-	500	-
19.1 to 19.13, Table No. - 9(Abnormal operation)	-	1000	-
19.101 to to 19.102(Abnormal operation)	-	1000	-
20(Stability and mechanical hazards)	-	500	-
21(Mechanical strength)	-	500	-
22(Construction)	-	500	-
22.101(Construction)	-	1000	-
23(Internal wiring)	-	1000	-
24(Components)	-	1000	-
25("Supply connection and external flexible cords")	-	1000	-
26("Terminals for external conductors")	-	1000	-
27(Provision for earthing)	-	500	-
28(Screws and connections)	-	500	-
29("Clearances, creepage distances and solid insulation")	-	500	-
30(Resistance to heat and fire)	-	1000	-
31(Resistance to rusting)	-	500	-
32("Radiation, toxicity and similar hazards")	-	500	-
Cl.19.11.4.1(Electrostatic discharges)	-	0	-
Cl.19.11.4.2(Radiated fields)	-	0	-
Cl.19.11.4.3(Fast transient bursts)	-	0	-
Cl.19.11.4.4(Voltage surges)	-	0	-
Cl.19.11.4.5(Injected currents)	-	0	-
Cl.19.11.4.6(Class 3 voltage dips and interruptions)	-	0	-
Cl.19.11.4.7(mains signals)	-	0	-

09 Apr, 2028

-
Included w.e.f 31.12.2025 Exclusion: Cl 19.11.4.1-19.11.4.7(EMI/EMC)

IS 302 : Part 2 : Sec 25 (2014)

Safety of household and similar electrical appliances: Part 2 Particular requirements: Section 25 Microwave ovens

All grade / Type / Size / Designation

29500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.0(Classification)	-	1000	-
7(Marking and instructions)	-	1000	-
8(Protection against live parts)	-	1000	-
9(STARTING OF MOTOR-OPERATED APPLIANCES)	-	0	-
10(POWER INPUT AND CURRENT)	-	1000	-
11(HEATING)	-	1500	-
13(LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE)	-	1000	-
14(IMPULSE VOLTAGE TEST)	-	1000	-
15(HUMIDITY TREATMENT TEST)	-	1000	-
16(LEAKAGE CURRENT AND ELECTRIC STRENGTH)	-	1000	-
17(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	1000	-
18(ENDURANCE)	-	2000	-
19(ABNORMAL OPERATION)	-	1500	-
20(STABILITY AND MECHANICAL HAZARDS)	-	1000	-
21(MECHANICAL STRENGTH)	-	1000	-
22(CONSTRUCTION)	-	1000	-
23(INTERNAL WIRING)	-	1000	-
24(COMPONENTS)	-	1000	-
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CORDS)	-	1000	-
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	1000	-
27(PROVISION FOR EARTHING)	-	1000	-
28(SCREWS AND CONNECTIONS)	-	1000	-
29(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION)	-	1000	-
30(RESISTANCE TO HEAT AND FIRE)	-	1500	-
31(RESISTANCE TO RUSTING)	-	1000	-
32(RADIATION, TOXICITY AND SIMILAR HAZARDS)	-	1000	-
22.32(Oxygen bomb for rubber material)	-	2000	-
22.46(Software)	-	0	-
Cl-19.11.4.1(Electrostatic discharge)	-	0	-
Cl-19.11.4.2(Radiated Fields)	-	0	-
Cl-19.11.4.3(Fast transient bursts)	-	0	-
Cl-19.11.4.4(Surge Immunity test)	-	0	-
Cl-19.11.4.5(Immunity to conducted discharge)	-	0	-
Cl-19.11.4.6(Voltage dips and interruptions)	-	0	-
Cl-19.11.4.7(Harmonics)	-	0	-
6.0(Classification)	-	0	-
7(Marking and instructions)	-	0	-
8(Protection against live parts)	-	0	-
9(STARTING OF MOTOR-OPERATED APPLIANCES)	-	0	-
10(POWER INPUT AND CURRENT)	-	0	-
11(HEATING)	-	0	-
13(LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE)	-	0	-
14(IMPULSE VOLTAGE TEST)	-	0	-
15(HUMIDITY TREATMENT TEST)	-	0	-
16(LEAKAGE CURRENT AND ELECTRIC STRENGTH)	-	0	-
17(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	0	-
18(ENDURANCE)	-	0	-
19(ABNORMAL OPERATION)	-	0	-
20(STABILITY AND MECHANICAL HAZARDS)	-	0	-
21(MECHANICAL STRENGTH)	-	0	-
22(CONSTRUCTION)	-	0	-
23(INTERNAL WIRING)	-	0	-
24(COMPONENTS)	-	0	-
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CORDS)	-	0	-
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	0	-
27(PROVISION FOR EARTHING)	-	0	-
28(SCREWS AND CONNECTIONS)	-	0	-
29(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION)	-	0	-
30(RESISTANCE TO HEAT AND FIRE)	-	0	-
31(RESISTANCE TO RUSTING)	-	0	-
32(RADIATION, TOXICITY AND SIMILAR HAZARDS)	-	0	-
22.32(Oxygen bomb for rubber material)	-	0	-
22.46(Software)	-	0	-
Cl-19.11.4.1(Electrostatic discharge)	-	0	-
Cl-19.11.4.2(Radiated Fields)	-	0	-
Cl-19.11.4.3(Fast transient bursts)	-	0	-
Cl-19.11.4.4(Surge Immunity test)	-	0	-
Cl-19.11.4.5(Immunity to conducted discharge)	-	0	-
Cl-19.11.4.6(Voltage dips and interruptions)	-	0	-
Cl-19.11.4.7(Harmonics)	-	0	-

09 Apr, 2028

-
"Included w.e.f 06.01.2026 19.11.4.1 (Electrostatic discharges) 19.11.4.2 (Radiated fields) 19.11.4.3 (Fast transient bursts) 19.11.4.4 Surge Immunity test) 19.11.4.5 (Immunity to conducted discharge) 19.11.4.6 (Class 3 Voltage dips and interruptions) 19.11.4.7 (Harmonics) 22.46 (Software)"

IS 302 : Part 2 : Sec 11 (1994)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 11 tumbler dryers

All grade/Type / Size / Designation

21800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(GENERAL REQUIREMENT)	-	500	-
4(GENERAL NOTES ON TESTS)	-	500	-
5(RATING)	-	500	-
6(CLASSIFICATION)	-	500	-
7(MARKING)	-	500	-
8(PROTECTION AGAINST ELECTRIC SHOCK)	-	500	-
9(STARTING OF MOTOR-OPERATED APPLIANCES)	-	1000	-
10(INPUT AND CURRENT)	-	1000	-
11(HEATING)	-	1000	-
12(OPERATION TJNDER OVERLOAD CONDITIONS OF APPLIANCES WITH HEATING ELEMENTS)	-	0	-
13(ELECTRICAL INSULATION AND LEAKAGE CURRENT AT OPERATING TEMPERATURE)	-	1000	-
14(RADIO AND TELEVISION INTERFERENCE SUPPRESSION)	-	800	-
15(MOISTURE RESISTANCE)	-	1000	-
16(INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-	1000	-
17(OVERLOAD PROTECTION)	-	1000	-
18(ENDURANCE )	-	0	-
19(ABNORMAL OPERATION)	-	700	Cl.19.11.4 EMI/EMC
20(STABILITY AND MECHANICAL HAZARDS)	-	1000	-
21(MECHANICAL STRENGTH)	-	500	-
22(CONSTRUCTION)	-	500	Cl.22.46 Software Testing
23(INTERNAL WIRING)	-	500	-
24(COMPONENTS)	-	500	-
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CABLES AND CORDS)	-	500	-
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	1000	-
27(PROVISION FOR EARTHING)	-	500	-
28(SCREWS AND CONNECTIONS)	-	500	-
29(CREEPAGE DISTANCES, CLEARANCES AND DISTANCES THROUGH INSULATION)	-	500	-
30(RESISTANCE TO HEAT, FIRE AND TACKING)	-	1000	-
31(RESISTANCE TO RUSTING)	-	500	-
32(RADIATION, TOXICITY AND SIMILAR HAZARDS)	-	300	-
101.1(Type Tests)	-	21800	-
101.3(Routine Tests)	-	500	-
101.2(Acceptance Tests)	-	10000	-
3(GENERAL REQUIREMENT)	-	0	-
4(GENERAL NOTES ON TESTS)	-	0	-
5(RATING)	-	0	-
6(CLASSIFICATION)	-	0	-
7(MARKING)	-	0	-
8(PROTECTION AGAINST ELECTRIC SHOCK)	-	0	-
9(STARTING OF MOTOR-OPERATED APPLIANCES)	-	0	-
10(INPUT AND CURRENT)	-	0	-
11(HEATING)	-	0	-
12(OPERATION TJNDER OVERLOAD CONDITIONS OF APPLIANCES WITH HEATING ELEMENTS)	-	0	-
13(ELECTRICAL INSULATION AND LEAKAGE CURRENT AT OPERATING TEMPERATURE)	-	0	-
14(RADIO AND TELEVISION INTERFERENCE SUPPRESSION)	-	0	-
15(MOISTURE RESISTANCE)	-	0	-
16(INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-	0	-
17(OVERLOAD PROTECTION)	-	0	-
18(ENDURANCE )	-	0	-
19(ABNORMAL OPERATION)	-	0	-
20(STABILITY AND MECHANICAL HAZARDS)	-	0	-
21(MECHANICAL STRENGTH)	-	0	-
22(CONSTRUCTION)	-	0	-
23(INTERNAL WIRING)	-	0	-
24(COMPONENTS)	-	0	-
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CABLES AND CORDS)	-	0	-
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	0	-
27(PROVISION FOR EARTHING)	-	0	-
28(SCREWS AND CONNECTIONS)	-	0	-
29(CREEPAGE DISTANCES, CLEARANCES AND DISTANCES THROUGH INSULATION)	-	0	-
30(RESISTANCE TO HEAT, FIRE AND TACKING)	-	0	-
31(RESISTANCE TO RUSTING)	-	0	-
32(RADIATION, TOXICITY AND SIMILAR HAZARDS)	-	0	-
101.1(Type Tests)	-	0	-
101.3(Routine Tests)	-	0	-
101.2(Acceptance Tests)	-	0	-
3(GENERAL REQUIREMENT)	-	0	-
4(GENERAL NOTES ON TESTS)	-	0	-
5(RATING)	-	0	-
6(CLASSIFICATION)	-	0	-
7(MARKING)	-	0	-
8(PROTECTION AGAINST ELECTRIC SHOCK)	-	0	-
9(STARTING OF MOTOR-OPERATED APPLIANCES)	-	0	-
10(INPUT AND CURRENT)	-	0	-
11(HEATING)	-	0	-
12(OPERATION TJNDER OVERLOAD CONDITIONS OF APPLIANCES WITH HEATING ELEMENTS)	-	0	-
13(ELECTRICAL INSULATION AND LEAKAGE CURRENT AT OPERATING TEMPERATURE)	-	0	-
14(RADIO AND TELEVISION INTERFERENCE SUPPRESSION)	-	0	-
15(MOISTURE RESISTANCE)	-	0	-
16(INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-	0	-
17(OVERLOAD PROTECTION)	-	0	-
18(ENDURANCE )	-	0	-
19(ABNORMAL OPERATION)	-	0	-
20(STABILITY AND MECHANICAL HAZARDS)	-	0	-
21(MECHANICAL STRENGTH)	-	0	-
22(CONSTRUCTION)	-	0	-
23(INTERNAL WIRING)	-	0	-
24(COMPONENTS)	-	0	-
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CABLES AND CORDS)	-	0	-
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	0	-
27(PROVISION FOR EARTHING)	-	0	-
28(SCREWS AND CONNECTIONS)	-	0	-
29(CREEPAGE DISTANCES, CLEARANCES AND DISTANCES THROUGH INSULATION)	-	0	-
30(RESISTANCE TO HEAT, FIRE AND TACKING)	-	0	-
31(RESISTANCE TO RUSTING)	-	0	-
32(RADIATION, TOXICITY AND SIMILAR HAZARDS)	-	0	-
101.1(Type Tests)	-	0	-
101.3(Routine Tests)	-	0	-
101.2(Acceptance Tests)	-	0	-
Cl-19 (Cl-19.11.4.1 of IS 302-1)(Electrostatic discharge)	-	0	-
Cl-19 (Cl-19.11.4.2 of IS 302-1)(Radiated Fields)	-	0	-
Cl-19 (Cl-19.11.4.3 of IS 302-1)(Fast transient bursts)	-	0	-
Cl-19 (Cl-19.11.4.4 of IS 302-1)(Surge Immunity test)	-	0	-
Cl-19 (Cl-19.11.4.5 of IS 302-1)(Immunity to conducted discharge)	-	0	-
Cl-19 (Cl-19.11.4.6 of IS 302-1)(Voltage dips and interruptions)	-	0	-
Cl-19 (Cl-19.11.4.7 of IS 302-1)(Harmonics)	-	0	-
Cl-19 (Cl-19.101 of IS 302-1)(Abnormal Operation)	-	0	-
3(GENERAL REQUIREMENT)	-	0	-
4(GENERAL NOTES ON TESTS)	-	0	-
5(RATING)	-	0	-
6(CLASSIFICATION)	-	0	-
7(MARKING)	-	0	-
8(PROTECTION AGAINST ELECTRIC SHOCK)	-	0	-
9(STARTING OF MOTOR-OPERATED APPLIANCES)	-	0	-
10(INPUT AND CURRENT)	-	0	-
11(HEATING)	-	0	-
12(OPERATION TJNDER OVERLOAD CONDITIONS OF APPLIANCES WITH HEATING ELEMENTS)	-	0	-
13(ELECTRICAL INSULATION AND LEAKAGE CURRENT AT OPERATING TEMPERATURE)	-	0	-
14(RADIO AND TELEVISION INTERFERENCE SUPPRESSION)	-	0	-
15(MOISTURE RESISTANCE)	-	0	-
16(INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-	0	-
17(OVERLOAD PROTECTION)	-	0	-
18(ENDURANCE )	-	0	-
19(ABNORMAL OPERATION)	-	0	-
20(STABILITY AND MECHANICAL HAZARDS)	-	0	-
21(MECHANICAL STRENGTH)	-	0	-
22(CONSTRUCTION)	-	0	-
23(INTERNAL WIRING)	-	0	-
24(COMPONENTS)	-	0	-
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CABLES AND CORDS)	-	0	-
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	0	-
27(PROVISION FOR EARTHING)	-	0	-
28(SCREWS AND CONNECTIONS)	-	0	-
29(CREEPAGE DISTANCES, CLEARANCES AND DISTANCES THROUGH INSULATION)	-	0	-
30(RESISTANCE TO HEAT, FIRE AND TACKING)	-	0	-
31(RESISTANCE TO RUSTING)	-	0	-
32(RADIATION, TOXICITY AND SIMILAR HAZARDS)	-	0	-
101.1(Type Tests)	-	0	-
101.3(Routine Tests)	-	0	-
101.2(Acceptance Tests)	-	0	-
Cl-19 (Cl-19.11.4.1 of IS 302-1)(Electrostatic discharge)	-	0	-
Cl-19 (Cl-19.11.4.2 of IS 302-1)(Radiated Fields)	-	0	-
Cl-19 (Cl-19.11.4.3 of IS 302-1)(Fast transient bursts)	-	0	-
Cl-19 (Cl-19.11.4.4 of IS 302-1)(Surge Immunity test)	-	0	-
Cl-19 (Cl-19.11.4.5 of IS 302-1)(Immunity to conducted discharge)	-	0	-
Cl-19 (Cl-19.11.4.6 of IS 302-1)(Voltage dips and interruptions)	-	0	-
Cl-19 (Cl-19.11.4.7 of IS 302-1)(Harmonics)	-	0	-
Cl-19 (Cl-19.101 of IS 302-1)(Abnormal Operation)	-	0	-

09 Apr, 2028

-
Included w.e.f. 30.01.2026 Exclusion; "22 (CONSTRUCTION) Cl-19 (Cl-19.11.4.1 of IS 302-1) (Electrostatic discharge) Cl-19 (Cl-19.11.4.2 of IS 302-1) (Radiated Fields) Cl-19 (Cl-19.11.4.3 of IS 302-1) (Fast transient bursts) Cl-19 (Cl-19.11.4.4 of IS 302-1) (Surge Immunity test) Cl-19 (Cl-19.11.4.5 of IS 302-1) (Immunity to conducted discharge) Cl-19 (Cl-19.11.4.6 of IS 302-1) (Voltage dips and interruptions) Cl-19 (Cl-19.11.4.7 of IS 302-1) (Harmonics) "

IS 302 : Part 2 : Sec 14 (2009)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 14 electric kitchen machines (First Revision)

All Grade / Type / Size / Designation

8400 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Classification- IS 302-1 )	-	100	-
6(Classification- IS 302-1)	-	100	-
7.1(Marking- IS 302-1)	-	100	-
7.1(Marking- IS 302-1)	-	100	-
7.1(Marking- IS 302-1)	-	100	-
7.1(Marking- IS 302-1)	-	100	-
7.1(Marking- IS 302-1)	-	100	-
7.1(Marking- IS 302-1)	-	100	-
7.1(Marking- IS 302-1)	-	100	-
7.1(Marking- IS 302-1)	-	100	-
7.3(Marking- IS 302-1)	-	100	-
7.4(Marking- IS 302-1)	-	100	-
7.6(Marking- IS 302-1)	-	100	-
7.7(Marking- IS 302-1)	-	100	-
7.8(Marking- IS 302-1)	-	100	-
7.11(Marking- IS 302-1)	-	100	-
7.12(Marking- IS 302-1)	-	100	-
7.13(Marking- IS 302-1)	-	100	-
7.14(Marking- IS 302-1)	-	100	-
7.15(Marking- IS 302-1)	-	100	-
7.101(Marking)	-	100	-
8( Protection Against Electric Shock, IS 302-1)	-	100	-
10(Power Input and Current, IS 302-1)	-	100	-
11(Heating, IS 302-1)	-	1000	-
11(Heating, IS 302-1)	-	1000	-
11(Heating, IS 302-1)	-	1000	-
11(Heating, IS 302-1)	-	1000	-
11(Heating, IS 302-1)	-	1000	-
13(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	300	-
13(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	300	-
14(Transient Over Voltages, IS 302-1)	-	400	-
15.1(Moisture Resistance, IS 302-1)	-	1000	-
15.2(Moisture Resistance, IS 302-1)	-	1000	-
15(Moisture Resistance, IS 302-1)	-	1000	-
16(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	300	-
16(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	300	-
17(Overload protection of Transformers and Associated Circuits, IS 302-1)	-	300	-
17(Overload protection of Transformers and Associated Circuits, IS 302-1)	-	300	-
19.7(Abnormal Operation, IS 302-1)	-	500	-
19.8(Abnormal Operation, IS 302-1)	-	500	-
19.9(Abnormal Operation, IS 302-1)	-	500	-
19.1(Abnormal Operation, IS 302-1)	-	500	-
19.101(Abnormal Operation)	-	500	-
19.102(Abnormal Operation)	-	500	-
20.1(Stability & Mechanical Hazards, IS 302-1)	-	500	-
20.2(Stability & Mechanical Hazards, IS 302-1)	-	500	-
20.101(Stability & Mechanical Hazards)	-	500	-
20.102(Stability & Mechanical Hazards)	-	500	-
20.103(Stability & Mechanical Hazards)	-	500	-
20.104(Stability & Mechanical Hazards)	-	500	-
20.105(Stability & Mechanical Hazards)	-	500	-
20.106(Stability & Mechanical Hazards)	-	500	-
20.107(Stability & Mechanical Hazards)	-	500	-
20.108(Stability & Mechanical Hazards)	-	500	-
20.109(Stability & Mechanical Hazards)	-	500	-
20.110(Stability & Mechanical Hazards)	-	500	-
20.111(Stability & Mechanical Hazards)	-	500	-
20.112(Stability & Mechanical Hazards)	-	500	-
20.113(Stability & Mechanical Hazards)	-	500	-
20.114(Stability & Mechanical Hazards)	-	500	-
20.115(Stability & Mechanical Hazards)	-	500	-
20.116(Stability & Mechanical Hazards)	-	500	-
21.1(Mechanical Strength, IS 302-1)	-	200	-
21.2(Mechanical Strength, IS 302-1)	-	200	-
22(Construction, IS 302-1)	-	200	-
22.101(Construction)	-	200	-
22.102(Construction)	-	200	-
23.1(Internal Wiring, IS 302-1)	-	500	-
23.2(Internal Wiring, IS 302-1)	-	500	-
23.3(Internal Wiring, IS 302-1)	-	500	-
23.4(Internal Wiring, IS 302-1)	-	500	-
23.5(Internal Wiring, IS 302-1)	-	500	-
23.6(Internal Wiring, IS 302-1)	-	500	-
23.7(Internal Wiring, IS 302-1)	-	500	-
23.8(Internal Wiring, IS 302-1)	-	500	-
23.9(Internal Wiring, IS 302-1)	-	500	-
23.10(Internal Wiring, IS 302-1)	-	500	-
24.1(Components, IS 302-1)	-	500	-
24.2(Components, IS 302-1)	-	500	-
24.5(Components, IS 302-1)	-	500	-
24.6(Components, IS 302-1)	-	500	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	300	-
25.5(Supply Connection and External Flexible Cords, IS 302-1)	-	300	-
25.6(Supply Connection and External Flexible Cords, IS 302-1)	-	300	-
25.7(Supply Connection and External Flexible Cords, IS 302-1)	-	300	-
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	300	-
26.9(Supply Connection and External Flexible Cords, IS 302-1)	-	200	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	300	-
25.11(Supply Connection and External Flexible Cords, IS 302-1)	-	300	-
25.12(Supply Connection and External Flexible Cords, IS 302-1)	-	300	-
25.13(Supply Connection and External Flexible Cords, IS 302-1)	-	300	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	300	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	300	-
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	300	-
25.16(Supply Connection and External Flexible Cords, IS 302-1)	-	300	-
25.17(Supply Connection and External Flexible Cords, IS 302-1)	-	300	-
25.18(Supply Connection and External Flexible Cords, IS 302-1)	-	300	-
25.19(Supply Connection and External Flexible Cords, IS 302-1)	-	300	-
25.2(Supply Connection and External Flexible Cords, IS 302-1)	-	300	-
25.21(Supply Connection and External Flexible Cords, IS 302-1)	-	300	-
25.22(Supply Connection and External Flexible Cords, IS 302-1)	-	300	-
26(Terminals for External Conductors, IS 302-1)	-	200	-
27(Provision for Earthing, IS 302-1)	-	200	-
27.2(Provision for Earthing, IS 302-1)	-	200	-
27.3(Provision for Earthing, IS 302-1)	-	200	-
27.4(Provision for Earthing, IS 302-1)	-	200	-
27.5(Provision for Earthing, IS 302-1)	-	200	-
28(Screws & Connections, IS 302-1)	-	100	-
29.1(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	100	-
29.2(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	100	-
30.1(Resistance to Heat and Fire, IS 302-1)	-	1000	-
30.2(Resistance to Heat and Fire, IS 302-1)	-	1000	-
31(Resistance of Rusting, IS 302-1)	-	100	-
32(Radiation, Toxicity and similar Hazard IS 302-1)	-	100	-
19.11.4.1(Electrostatic discharges)	-	0	-
19.11.4.2(Radiated fields)	-	0	-
19.11.4.3(Fast transient bursts)	-	0	-
19.11.4.4(Surge immunity test)	-	0	-
19.11.4.5(Immunity to conducted discharges)	-	0	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	0	-
19.11.4.7(Harmonics)	-	0	-
19.11.4.5(Immunity to conducted discharges)	-	0	-
4(GENERAL REQUIREMENTS)	-	100	-
5(GENERAL CONDITIONS FOR THE TESTS)	-	100	-
27(Provision for Earthing)	-	200	-
29(Clearances, Creepage distances and Solid Insulation)	-	100	-

09 Apr, 2028

IS 302 : Part 2 : Sec 80 (2017)

Household and similar electrical appliances - Safety: Part 2 - 80 particular requirements for fans (First Revision)

All Grade / Type / Size / Designation

9500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
32.0(Radiation, Toxicity and Similar Hazards)	-	0	-
31.0(Resistance To Rusting)	-	200	-
30.0(Resistance To Heat and Fire)	-	200	-
29.0(Creepage Distances and Clearances)	-	200	-
28.0(Screws and Connections)	-	300	-
27.0(Provision For Earthing)	-	500	-
26.0(Terminals for external conductors)	-	500	-
25.0(Supply Connection and External Flexible Cords)	-	500	-
24.0(Components)	-	500	-
23.0(Internal Wiring)	-	500	-
22.0(Construction)	-	500	-
20.0(Stability and mechanical hazards)	-	500	-
19.0(Abnormal Operation)	-	1000	-
17.0(Overload Protection of transformer and associated circuit)	-	500	-
16.0(Leakage current and Electric strength (After Humidity (Environmental) Treatment))	-	500	-
15.0(Moisture resistance)	-	500	-
14.0(Transient Overvoltage)	-	500	-
13.0(Leakage Current and electric strength at operating temperature)	-	500	-
11.0(Heating)	-	700	-
10.0(Input and Current)	-	200	-
8.0(Protection against access to live parts)	-	200	-
7.0(Classification)	-	0	-
6.0(Marking and Instructions)	-	0	-
19.11.4.1(Electrostatic discharges)	-	0	-
19.11.4.2(Radiated fields)	-	0	-
19.11.4.3(Fast transient bursts)	-	0	-
19.11.4.4(Surge immunity test)	-	0	-
19.11.4.5(Immunity to conducted discharges)	-	0	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	0	-
19.11.4.7(Harmonics)	-	0	-
4(GENERAL REQUIREMENT)	-	0	-
5(GENERAL CONDITIONS FOR THE TESTS)	-	0	-
21.0(Mechanical Strength)	-	0	-
19.11.4.1(Electrostatic discharges)	-	0	-
19.11.4.2(Radiated fields)	-	0	-
19.11.4.3(Fast transient bursts)	-	0	-
19.11.4.4(Surge immunity test)	-	0	-
19.11.4.5(Immunity to conducted discharges)	-	0	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	0	-
19.11.4.7(Harmonics)	-	0	-
4(GENERAL REQUIREMENT)	-	0	-
5(GENERAL CONDITIONS FOR THE TESTS)	-	0	-

09 Apr, 2028

IS 13592 (2013)

Unplasticized Polyvinyl Chloride (PVC-U) Pipes for Soil and Waste Discharge System Inside and Outside Buiildings Including Ventilation and Rainwater System

All Grade / Type / Size / Designation

12800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.5(Surface colour of the pipes shall be dark shade of grey)	-	100	-
Cl6.3(The composition shall be based on PVC resin having a K-value of 64 or greater when tested in accordance with IS 4669)	-	1000	-
Cl.7.1(Mean out side Diameter (For less than or equal to 40 mm- Average of 8 , For higher diameters up to 110 mm average of 6))	-	100	-
Cl.7.1(Outside Diameter at any point (Take 8 reading reported minimum, maximum))	-	100	-
Cl.7.1(Wall thickness "minimum,maximum" (Take 8 reading))	-	100	-
Cl.7.2(Pipes shall be supplied in nominal lengths of 2, 3, 4 or 6 metres either plain or with socket for solvent cementing/grooved socket. Tolerances on specified length shall be + 10 mm and – 0 mm.The nominal length of the pipe with socket for solvent cementing/grooved socket shall be as given in Fig. 1.)	-	100	-
Cl.7.3.1(Minimum wall thickness of socket on pipes shall be as given in Table 2 read with Fig. 2 and Fig. 3.)	-	100	-
Cl.7.3.2(Dimensions of sockets for solvent cementing and grooved sockets of pipes shall be as given in Tables 3 and 4 respectively, read with Fig. 2 and 3.)	-	100	-
Cl.8.1(The internal and external surface of the pipes shall be smooth and clean, and free from grooving and other defects. The end shall be clearly cut and shall be square with the axis of the pipe. The end may be chamfered on the plain side.)	-	100	-
Cl.8.2(When tested by the method described in IS 12235 (Part 5), a length of pipe sample of 200 ± 20 mm shall not alter in length by more than 5 percent. In the case of socket ended pipes, this test shall be carried out on the plain portion of pipe taken at least 100 mm away from the root of the socket.)	-	1000	-
Cl.8.4(When determined in accordance with IS 12235 (Part 2), the vicat softening temperature of the specimen shall not be less than 79°C.)	-	1000	-
Cl.8.5(After the required period of exposure, the tensile strengths of two samples when tested as per IS 12235 (Part 13) shall not show difference of more than 20 percent of their initial tensile strengths)	-	1000	-
Cl. 9, IS 12235 Part 7(Resistance to Sulphuric Acid)	-	1500	-
Cl.10.1(When tested by method prescribed in IS 12235 (Part 9),the pipe shall have a true impact rate of not more than 10 percent. Mass of striker and height of fall shall be as per Annex A.)	-	700	-
Cl.10.2(When determined in accordance with the method described in IS 12235 (Part 13), the tensile strength at break shall not be less than 45 MPa.)	-	1000	-
Cl.10.3(The axial shrinkage shall not exceed 2 percent when determined in accordance with Annex B.)	-	1000	-
Cl.11.(Jointing of solvent cementing joints is to be carried out using solvent conforming to IS 14182. Apply a pressure of 0.05 MPa for a period of 15 min and there should be no leakage at any joint.)	-	1000	-
Cl. 12, IS 12235 Part 11(Resistance to Di-Chloro-Methane)	-	1000	-
8.6(Effect on Water Test)	-	1500	-
14(Marking)	-	100	-
Cl 8.6(Effect on Water Lead (first extraction))	-	1500	-
Cl 8.6(Effect on Water Lead (first extraction))	-	1500	-
Cl 8.6(Effect on Water Lead (third extraction))	-	1500	-
Cl 8.6(Effect on Water Dialkyl tin C4 and higher homologues(measuredas tin )(third extraction ))	-	1500	-
Cl 8.6(Effect on Water Cadmium (mean of first extraction, second extraction and third extraction))	-	1500	-
Cl 8.6(Effect on Water Mercury (mean of first extraction, second extraction and third extraction))	-	1500	-
CL 7.3(Socket length (Take 4 reading & minimum will be reported))	-	100	-
CL 7.3.1(Socket wall Thickness For S2 and S3 (Take 4 reading and average will be reported))	-	100	-
CL 7.3.2 grooved sockets(Inside diameter of Sockets, D1 (Take 4 reading & minimum, Maximum will be reported))	-	100	-
CL 7.3.2 grooved sockets(Inside diameter of beading D2 (Take 4 reading & minimum, Maximum will be reported))	-	100	-
CL 7.3.2 grooved sockets(Length of beading and Neck A (Take 4 reading & Maximum will be reported))	-	100	-
CL 7.3.2 grooved sockets(Neck of Socket B (Take 4 reading & minimum, will be reported))	-	100	-
CL 7.3.2 grooved sockets(Length beyond beading C (Take 4 reading & minimum will be reported))	-	100	-
Cl8.3(This test shall be carried out for socket end pipes only. When tested by the method described in IS 12235 (Part 6), the test specimens shall not show blisters, excessive delamination or cracking or signs of weld line splitting.)	-	1000	-
Cl.5(Surface colour of the pipes shall be dark shade of grey)	-	0	-
Cl6.3(The composition shall be based on PVC resin having a K-value of 64 or greater when tested in accordance with IS 4669)	-	0	-
Cl.7.1(Mean out side Diameter (For less than or equal to 40 mm- Average of 8 , For higher diameters up to 110 mm average of 6))	-	0	-
Cl.7.1(Outside Diameter at any point (Take 8 reading reported minimum, maximum))	-	0	-
Cl.7.1(Wall thickness "minimum,maximum" (Take 8 reading))	-	0	-
Cl.7.2(Pipes shall be supplied in nominal lengths of 2, 3, 4 or 6 metres either plain or with socket for solvent cementing/grooved socket. Tolerances on specified length shall be + 10 mm and – 0 mm.The nominal length of the pipe with socket for solvent cementing/grooved socket shall be as given in Fig. 1.)	-	0	-
Cl.7.3.1(Minimum wall thickness of socket on pipes shall be as given in Table 2 read with Fig. 2 and Fig. 3.)	-	0	-
Cl.7.3.2(Dimensions of sockets for solvent cementing and grooved sockets of pipes shall be as given in Tables 3 and 4 respectively, read with Fig. 2 and 3.)	-	0	-
Cl.8.1(The internal and external surface of the pipes shall be smooth and clean, and free from grooving and other defects. The end shall be clearly cut and shall be square with the axis of the pipe. The end may be chamfered on the plain side.)	-	0	-
Cl.8.2(When tested by the method described in IS 12235 (Part 5), a length of pipe sample of 200 ± 20 mm shall not alter in length by more than 5 percent. In the case of socket ended pipes, this test shall be carried out on the plain portion of pipe taken at least 100 mm away from the root of the socket.)	-	0	-
Cl.8.4(When determined in accordance with IS 12235 (Part 2), the vicat softening temperature of the specimen shall not be less than 79°C.)	-	0	-
Cl.8.5(After the required period of exposure, the tensile strengths of two samples when tested as per IS 12235 (Part 13) shall not show difference of more than 20 percent of their initial tensile strengths)	-	0	-
Cl. 9, IS 12235 Part 7(Resistance to Sulphuric Acid)	-	0	-
Cl.10.1(When tested by method prescribed in IS 12235 (Part 9),the pipe shall have a true impact rate of not more than 10 percent. Mass of striker and height of fall shall be as per Annex A.)	-	0	-
Cl.10.2(When determined in accordance with the method described in IS 12235 (Part 13), the tensile strength at break shall not be less than 45 MPa.)	-	0	-
Cl.10.3(The axial shrinkage shall not exceed 2 percent when determined in accordance with Annex B.)	-	0	-
Cl.11.(Jointing of solvent cementing joints is to be carried out using solvent conforming to IS 14182. Apply a pressure of 0.05 MPa for a period of 15 min and there should be no leakage at any joint.)	-	0	-
Cl. 12, IS 12235 Part 11(Resistance to Di-Chloro-Methane)	-	0	-
8.6(Effect on Water Test)	-	0	-
14(Marking)	-	0	-
Cl 8.6(Effect on Water Lead (first extraction))	-	0	-
Cl 8.6(Effect on Water Lead (first extraction))	-	0	-
Cl 8.6(Effect on Water Lead (third extraction))	-	0	-
Cl 8.6(Effect on Water Dialkyl tin C4 and higher homologues(measuredas tin )(third extraction ))	-	0	-
Cl 8.6(Effect on Water Cadmium (mean of first extraction, second extraction and third extraction))	-	0	-
Cl 8.6(Effect on Water Mercury (mean of first extraction, second extraction and third extraction))	-	0	-
CL 7.3(Socket length (Take 4 reading & minimum will be reported))	-	0	-
CL 7.3.1(Socket wall Thickness For S2 and S3 (Take 4 reading and average will be reported))	-	0	-
CL 7.3.2 grooved sockets(Inside diameter of Sockets, D1 (Take 4 reading & minimum, Maximum will be reported))	-	0	-
CL 7.3.2 grooved sockets(Inside diameter of beading D2 (Take 4 reading & minimum, Maximum will be reported))	-	0	-
CL 7.3.2 grooved sockets(Length of beading and Neck A (Take 4 reading & Maximum will be reported))	-	0	-
CL 7.3.2 grooved sockets(Neck of Socket B (Take 4 reading & minimum, will be reported))	-	0	-
CL 7.3.2 grooved sockets(Length beyond beading C (Take 4 reading & minimum will be reported))	-	0	-
Cl8.3(This test shall be carried out for socket end pipes only. When tested by the method described in IS 12235 (Part 6), the test specimens shall not show blisters, excessive delamination or cracking or signs of weld line splitting.)	-	0	-
Cl.5(Surface colour of the pipes shall be dark shade of grey)	-	0	-
Cl6.3(The composition shall be based on PVC resin having a K-value of 64 or greater when tested in accordance with IS 4669)	-	0	-
Cl.7.1(Mean out side Diameter (For less than or equal to 40 mm- Average of 8 , For higher diameters up to 110 mm average of 6))	-	0	-
Cl.7.1(Outside Diameter at any point (Take 8 reading reported minimum, maximum))	-	0	-
Cl.7.1(Wall thickness "minimum,maximum" (Take 8 reading))	-	0	-
Cl.7.2(Pipes shall be supplied in nominal lengths of 2, 3, 4 or 6 metres either plain or with socket for solvent cementing/grooved socket. Tolerances on specified length shall be + 10 mm and – 0 mm.The nominal length of the pipe with socket for solvent cementing/grooved socket shall be as given in Fig. 1.)	-	0	-
Cl.7.3.1(Minimum wall thickness of socket on pipes shall be as given in Table 2 read with Fig. 2 and Fig. 3.)	-	0	-
Cl.7.3.2(Dimensions of sockets for solvent cementing and grooved sockets of pipes shall be as given in Tables 3 and 4 respectively, read with Fig. 2 and 3.)	-	0	-
Cl.8.1(The internal and external surface of the pipes shall be smooth and clean, and free from grooving and other defects. The end shall be clearly cut and shall be square with the axis of the pipe. The end may be chamfered on the plain side.)	-	0	-
Cl.8.2(When tested by the method described in IS 12235 (Part 5), a length of pipe sample of 200 ± 20 mm shall not alter in length by more than 5 percent. In the case of socket ended pipes, this test shall be carried out on the plain portion of pipe taken at least 100 mm away from the root of the socket.)	-	0	-
Cl.8.4(When determined in accordance with IS 12235 (Part 2), the vicat softening temperature of the specimen shall not be less than 79°C.)	-	0	-
Cl.8.5(After the required period of exposure, the tensile strengths of two samples when tested as per IS 12235 (Part 13) shall not show difference of more than 20 percent of their initial tensile strengths)	-	0	-
Cl. 9, IS 12235 Part 7(Resistance to Sulphuric Acid)	-	0	-
Cl.10.1(When tested by method prescribed in IS 12235 (Part 9),the pipe shall have a true impact rate of not more than 10 percent. Mass of striker and height of fall shall be as per Annex A.)	-	0	-
Cl.10.2(When determined in accordance with the method described in IS 12235 (Part 13), the tensile strength at break shall not be less than 45 MPa.)	-	0	-
Cl.10.3(The axial shrinkage shall not exceed 2 percent when determined in accordance with Annex B.)	-	0	-
Cl.11.(Jointing of solvent cementing joints is to be carried out using solvent conforming to IS 14182. Apply a pressure of 0.05 MPa for a period of 15 min and there should be no leakage at any joint.)	-	0	-
Cl. 12, IS 12235 Part 11(Resistance to Di-Chloro-Methane)	-	0	-
8.6(Effect on Water Test)	-	0	-
14(Marking)	-	0	-
Cl 8.6(Effect on Water Lead (first extraction))	-	0	-
Cl 8.6(Effect on Water Lead (first extraction))	-	0	-
Cl 8.6(Effect on Water Lead (third extraction))	-	0	-
Cl 8.6(Effect on Water Dialkyl tin C4 and higher homologues(measuredas tin )(third extraction ))	-	0	-
Cl 8.6(Effect on Water Cadmium (mean of first extraction, second extraction and third extraction))	-	0	-
Cl 8.6(Effect on Water Mercury (mean of first extraction, second extraction and third extraction))	-	0	-
CL 7.3(Socket length (Take 4 reading & minimum will be reported))	-	0	-
CL 7.3.1(Socket wall Thickness For S2 and S3 (Take 4 reading and average will be reported))	-	0	-
CL 7.3.2 grooved sockets(Inside diameter of Sockets, D1 (Take 4 reading & minimum, Maximum will be reported))	-	0	-
CL 7.3.2 grooved sockets(Inside diameter of beading D2 (Take 4 reading & minimum, Maximum will be reported))	-	0	-
CL 7.3.2 grooved sockets(Length of beading and Neck A (Take 4 reading & Maximum will be reported))	-	0	-
CL 7.3.2 grooved sockets(Neck of Socket B (Take 4 reading & minimum, will be reported))	-	0	-
CL 7.3.2 grooved sockets(Length beyond beading C (Take 4 reading & minimum will be reported))	-	0	-
Cl8.3(This test shall be carried out for socket end pipes only. When tested by the method described in IS 12235 (Part 6), the test specimens shall not show blisters, excessive delamination or cracking or signs of weld line splitting.)	-	0	-

09 Apr, 2028

-
Included w.e.f 31.12.2025

IS 2925 (1984)

Specification for industrial safety helmets (Second Revision)

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.6(Performance Requirements)	-	1000	-
8.5(Performance Requirements)	-	1000	-
8.4(Performance Requirements)	-	1000	-
8.3(Performance Requirements)	-	1000	-
8.2(Performance Requirements)	-	1000	-
8.1(Performance Requirements)	-	1000	-
7.1(Construction)	-	500	-
6.1(Construction)	-	100	-
5.5(Construction)	-	1000	-
5.4(Construction)	-	1000	-
5.3(Construction)	-	1000	-
5.2(Construction)	-	1000	-
5.1(Construction)	-	1000	-
4.1(Sizes)	-	500	-
3.3(Material)	-	2700	-
3.2(Material)	-	200	-
3.1(Material)	-	500	-
8.6(Performance Requirements)	-	0	-
8.5(Performance Requirements)	-	0	-
8.4(Performance Requirements)	-	0	-
8.3(Performance Requirements)	-	0	-
8.2(Performance Requirements)	-	0	-
8.1(Performance Requirements)	-	0	-
7.1(Construction)	-	0	-
6.1(Construction)	-	0	-
5.5(Construction)	-	0	-
5.4(Construction)	-	0	-
5.3(Construction)	-	0	-
5.2(Construction)	-	0	-
5.1(Construction)	-	0	-
4.1(Sizes)	-	0	-
3.3(Material)	-	0	-
3.2(Material)	-	0	-
3.1(Material)	-	0	-

09 Apr, 2028

-
Included w.e.f. 02.12.2025

IS 302 : Part 1 (2008)

Safety of household and similar electrical appliances: Part 1 general requirements (Sixth Revision)

50000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking and instructions)	-	300	-
8.1.1(Protection against live parts in all positions)	-	1000	-
8.1.2(Protection against live parts in openings)	-	1000	-
8.1.3(Protection against live parts in visible glowing heating elements)	-	1000	-
8.1.4(Protection against live parts against protective impedance)	-	1000	-
9(Starting of motor operation test requirements and tests)	-	1000	-
10.1(Power input)	-	1000	-
10.2(Current input)	-	1000	-
11.1(General)	-	300	-
11.2(General)	-	1000	-
11.3(Heating)	-	300	-
13.1(General)	-	300	-
13.2(Leakage current at operating temperature)	-	1500	-
13.3(Electric Strength at operating temperature)	-	1500	-
14(Transient Over Voltages)	-	1500	-
15.0(General)	-	300	-
15.1(Ingress Protection test other than IPX0 (IP test))	-	2500	-
15.2(Spillage Test)	-	1000	-
15.3(Humidity Test)	-	1500	-
16.0(General)	-	500	-
16.1(General)	-	500	-
16.2(Leakage Current (after Clause 15))	-	1000	-
16.3(Electric Strength (after clause 15 and 16.2))	-	1500	-
17(Over Load Protection of Transformers and associated circuits)	-	2000	-
18(Endurance Test requirements and tests)	-	1500	-
19(Abnormal Operation)	-	1500	-
20(Stability test)	-	1500	-
21(Mechanical Strength Test)	-	1500	-
22(Construction verification related test)	-	1500	-
23(General)	-	300	-
24(Components)	-	2000	-
25(Supply connection and external flexible cords)	-	2000	-
26(Terminals for external conductors)	-	2000	-
27(Provision for earthing)	-	2500	-
28(Screw test and connections)	-	2500	-
29(clearance, creepage distances and solid insulation)	-	1000	-
30.1(Ball pressure test)	-	1000	-
30.2(Glow Wire Test)	-	1000	-
30.2(Needle Flame Test)	-	1500	-
31(Resistance to Rusting)	-	1000	-
32(Radiation Toxicity and Similar Hazards)	-	1000	-
4(General requirement)	-	300	-
16(Leakage current and electric strength)	-	1000	-
17(Overload protection of transformers and associated circuits)	-	2000	-
18(Endurance)	-	0	-
8.1.5(Live parts of built-in appliances)	-	1000	-
11.4(Heating appliances)	-	300	-
11.5(Motor-operated appliances)	-	300	-
11.6(Combined appliances)	-	300	-
11.7(Duration corresponding)	-	300	-
11.8(Temperature rise)	-	300	-
19.11.4.1(Electrostatic discharges)	-	0	-
19.11.4.2(Radiated fields)	-	0	-
19.11.4.3(Fast transient bursts)	-	0	-
19.11.4.4(Surge immunity test)	-	0	-
19.11.4.5(Immunity to conducted discharges)	-	0	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	0	-
19.11.4.7(Harmonics)	-	0	-
4(General Requirement)	-	300	-
5(General conditions for tests)	-	300	-
6(Classification- IS 302-1)	-	300	-

09 Apr, 2028

-
Included w.e.f. 30.10.2025 Exclusion: 19.11.4.1 (Electrostatic discharges) 19.11.4.2 (Radiated fields) 19.11.4.3 (Fast transient bursts) 19.11.4.4 (Surge immunity test) 19.11.4.5 (Immunity to conducted discharges) 19.11.4.6 (Class 3 Voltage dips and interruptions) 19.11.4.7 (Harmonics) "(1)Cooking ranges, hobs, ovens and similar appliances, (2)Commercial Dispensing Appliances and Vending Machines, (3) spin extractors (For testing charges please refer relevant part 2 standard in LIMS)"

IS 302 : Part 2 : Sec 6 (2009)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 6 cooking ranges, hobs, ovens and similar appliances (First Revision)

All Grade / Type / Size / Designation

13900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.0(Classification)	-	50	-
7.0(Marking and instructions)	-	50	-
8.0(Protection against access to live part test)	-	250	-
9.0(Starting of motor-operated appliances test)	-	0	-
10.0(Power Input and current test)	-	500	-
11.0(Heating test)	-	500	-
13.0(Leakage current and electric strength test)	-	500	-
14.0(Transient voltages)	-	500	-
15.0(Moisture Resistance)	-	500	-
16.0(Leakage current and electric strength test)	-	500	-
17.0(Overload protection of transformers test)	-	100	-
18.0(Endurance test)	-	250	-
19.0(Abnormal Operations)	-	500	-
20.0(Stability and Mechanical Hazards)	-	300	-
21.0(Mechanical Strength)	-	200	-
22.0(Construction verification related tests)	-	450	-
23.0(Internal wiring)	-	250	-
24.0(Components)	-	100	-
25.0(Supply connections and External Flexible Cords)	-	250	-
26.0(Terminal for External Conductors)	-	150	-
27.0(Provision for Earthing)	-	250	-
28.0(Screws and connections)	-	250	-
29.0(Clearances and Creepage distances and solid insulation)	-	350	-
30.0(Resistance to heat and fire)	-	100	-
31.0(Resistance to rusting)	-	100	-
32.0(Radiation, Toxicity and Similar hazards)	-	250	-
19.11.4.1(Electrostatic discharges)	-	0	-
19.11.4.2(Radiated fields)	-	0	-
19.11.4.3(Fast transient bursts)	-	0	-
19.11.4.4(Surge immunity test)	-	0	-
19.11.4.5(Immunity to conducted discharges)	-	0	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	0	-
19.11.4.7(Harmonics)	-	0	-
4(General Requirements)	-	10	-
5(General condition for the tests)	-	200	-
22.111(Pyrolytic self-cleaning)	-	1000	-
6.0(Classification)	-	0	-
7.0(Marking and instructions)	-	0	-
8.0(Protection against access to live part test)	-	0	-
9.0(Starting of motor-operated appliances test)	-	0	-
10.0(Power Input and current test)	-	0	-
11.0(Heating test)	-	0	-
13.0(Leakage current and electric strength test)	-	0	-
14.0(Transient voltages)	-	0	-
15.0(Moisture Resistance)	-	0	-
16.0(Leakage current and electric strength test)	-	0	-
17.0(Overload protection of transformers test)	-	0	-
18.0(Endurance test)	-	0	-
19.0(Abnormal Operations)	-	0	-
20.0(Stability and Mechanical Hazards)	-	0	-
21.0(Mechanical Strength)	-	0	-
22.0(Construction verification related tests)	-	0	-
23.0(Internal wiring)	-	0	-
24.0(Components)	-	0	-
25.0(Supply connections and External Flexible Cords)	-	0	-
26.0(Terminal for External Conductors)	-	0	-
27.0(Provision for Earthing)	-	0	-
28.0(Screws and connections)	-	0	-
29.0(Clearances and Creepage distances and solid insulation)	-	0	-
30.0(Resistance to heat and fire)	-	0	-
31.0(Resistance to rusting)	-	0	-
32.0(Radiation, Toxicity and Similar hazards)	-	0	-
19.11.4.1(Electrostatic discharges)	-	0	-
19.11.4.2(Radiated fields)	-	0	-
19.11.4.3(Fast transient bursts)	-	0	-
19.11.4.4(Surge immunity test)	-	0	-
19.11.4.5(Immunity to conducted discharges)	-	0	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	0	-
19.11.4.7(Harmonics)	-	0	-
4(General Requirements)	-	0	-
5(General condition for the tests)	-	0	-
22.111(Pyrolytic self-cleaning)	-	0	-

09 Apr, 2028

-
Included w.e.f. 31.10.2025 Exclusion: 19.11.4.1 (Electrostatic discharges) 19.11.4.2 (Radiated fields) 19.11.4.3 (Fast transient bursts) 19.11.4.4 (Surge immunity test) 19.11.4.5 (Immunity to conducted discharges) 19.11.4.6 (Class 3 Voltage dips and interruptions) 19.11.4.7 (Harmonics) 9.0 (Starting of motor-operated appliances test)

1
2
3
Next
Last

Bureau of Indian Standards

The National Standards Body of India

Samridhi Test House Pvt. Ltd.

KH.NO. 45/23/1 GROUND FLOOR, VILLAGE & POST OFFICE VILLAGE PRAHALADPUR, North Delhi, NEW DELHI, North West, Delhi, 110042

9870394724 info@samridhitesthouse.com

Scope List