BIS - LIMS (Laboratory Information Management System)

DELHI TEST HOUSE (65) KUNDLI-2 SONIPAT

Plot No. 65, Phase-IV, Sector-57, HSIDC Industrial Area, Behind Parnami Hospital, Kundli,, SONIPAT, Sonipat, Haryana, 131028

9810442016 rohit@delhitesthouse.com

Scope List

Reset

64 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

IS 14697 (2021)

ac STATIC TRANSFORMER OPERATED WATTHOUR METERS CLASS 02 S AND 05 S AND VAR-HOUR METERS CLASS 02 S 05 S AND 10 S - SPECIFICATION First Revision

125000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
9.5 & 12.7.6.2(Impulse voltage test)	-	2500	-
9.5 & 12.7.6.3(a.c. voltage test)	-	2000	-
12.7.6.4(Insulation resistance test)	-	1000	-
11.1(Limits of Error Due to Variation of the Current)	-	1000	-
12.15(Interpretation of Test Results)	-	1000	-
11.6 & 12.14(Meter Constant)	-	1000	-
12.13 & 11.5(Starting Current)	-	750	-
11.4.2 & 12.12(Running with No-Load)	-	750	-
11.3 & 12.11(Limits of Error Due to Ambient Temperature Variation)	-	2000	-
11.7 & 12.16(Repeatability of Error Test)	-	1500	-
9.1 & 12.7.1(Power Consumption)	-	750	-
9.2.2 & 12.7.2(Influence of Supply Voltage)	-	750	-
9.2.3 & 12.7.3(Short Time Over Current)	-	1500	-
9.3 & 12.7.4(Influence of Self-heating)	-	1000	-
9.4 & 12.7.5(Influence of Heating)	-	1000	-
"12.8.2("Test for Immunity to Electrostatic Discharge (ESD) ")	-	22000	-
"12.8.3(Test for Immunity to Electromagnetic HF Fields)	-	22000	-
"12.8.4(Fast Transient Burst Test)	-	17000	-
"12.8.5(Surge Immunity Test)	-	22000	-
"12.8.6(Radio Interference Measurement)	-	5000	-
12.6.1(Dry heat test)	-	2000	-
12.6.2(Cold Test)	-	3000	-
12.6.3(Damp Heat Cycle Test)	-	3500	-
12.3.1(Shock test)	-	2000	-
12.3.2(Vibration test)	-	2000	-
12.3.3(Spring hammer test)	-	1000	-
12.5(Protection against penetration of dust and water)	-	1500	-
12.4(Test of resistance to heat and fire)	-	2000	-
6.1(General)	-	300	-
6.2(Meter Case)	-	300	-
6.3(Window)	-	200	-
6.4(Terminals, Terminals Block(s) and Protective Earth Terminal)	-	300	-
6.5(Terminal Cover(s))	-	300	-
6.10(Display of Measured Values)	-	500	-

31 Dec, 2026

-
Included w.e.f. 28-04-2022.

IS/IEC 60669 : Part 2 : Sec 1 (2008)

Switches for Household and Similar Fixed Electrical Installations Part 2 Particular Requirements Section 1 Electronic Switches

140000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Classification)	-	500	-
8(Marking)	-	500	-
9(Checking Dimension)	-	500	-
10(Protection against Access to Live Parts)	-	1500	-
11(Provision for earthing)	-	1000	-
12(Terminals)	-	2000	-
13(Constructional Requirements)	-	1000	-
14(Mechanism)	-	1000	-
15(Resistance to ageing, protection provided by enclosures of switches, and resistance to humidity )	-	2000	-
16(Insulation resistance & Electric Strength)	-	1000	-
17(Temperature Rise)	-	1500	-
18(Making and breaking capacity)	-	500	-
19(Normal Operation)	-	15000	-
20(Mechanical Strength)	-	1000	-
21(Resistance to heat)	-	1000	-
22(Screws, current -carrying parts and connections)	-	1000	-
23(Creepage distances, clearances and distance through sealing compound)	-	1000	-
24(Resistance of insulating material to abnormal heat to fire and to tracking)	-	2500	-
25(Resistance to rusting)	-	1000	-
26(EMC Requirements)	-	84000	-
101(Abnormal Conditions)	-	2500	-
102(Components)	-	2500	-
CL. 10(Protection against electric shock test)	-	1500	-

31 Dec, 2026

-
Included w.e.f. 28-04-2022.

IS 8034 (2018)

Submersible pumpsets - Specification (Third Revision)

14100 View breakup
For BIS Samples: 1.5 times of BIS Testing Charges and other upto 15 Kw Rs.15,000/- each additional Kw Rs.1000/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1 (a)(Constructional Features)	-	150	-
6.1 (b)(Constructional Features)	-	150	-
6.1 (c)(Constructional Features)	-	100	-
6.1 (d)(Constructional Features)	-	150	-
6.1 (e)(Constructional Features)	-	150	-
6.1 (f)(Constructional Features)	-	150	-
6.2 (a)(Material of construction Part Sub Assembly Shaft Sleeve)	-	150	-
6.2 (b)(Material of construction Part Sub Assembly Casing wear ring (if provided))	-	150	-
6.2 (c)(Material of construction Part Sub Assembly Bush)	-	150	-
6.2 (d)(Material of construction Part Sub Assembly Discharge casing (if provided))	-	150	-
6.2 (e)(Material of construction Part Sub Assembly Impeller)	-	150	-
6.2 (f)(Material of construction Part Sub Assembly Pump Bowl/Diffuser)	-	150	-
6.2 (g)(Material of construction Part Sub Assembly Pump Shaft)	-	150	-
6.2 (h)(Material of construction Part Sub Assembly Suction Casing)	-	150	-
6.2.2.1(Gaskets, Seals and Packings)	-	150	-
6.2.2.2(Gaskets, Seals and Packings)	-	150	-
6.2.3(Gaskets, Seals and Packings)	-	150	-
6.2.4(Gaskets, Seals and Packings)	-	150	-
6.2.5(Gaskets, Seals and Packings)	-	150	-
7.1.1(Design features: Typical design features 0f components of pump)	-	150	-
7.1.2(Design features: Typical design features 0f components of pump)	-	150	-
7.1.3(Design features: Typical design features 0f components of pump)	-	150	-
7.1.4(Design features: Typical design features 0f components of pump)	-	150	-
7.1.5(Design features: Typical design features 0f components of pump)	-	150	-
7.1.6(Design features: Typical design features 0f components of pump)	-	150	-
8.1(General Requirements)	-	150	-
8.2(Casing)	-	150	-
8.3(Impeller)	-	150	-
8.4.1(Shaft)	-	150	-
8.4.2(Shaft)	-	150	-
8.5.1(Balancing)	-	150	-
8.5.2(Balancing)	-	150	-
8.7.1(Direction of Rotation)	-	150	-
8.7.2(Direction of Rotation)	-	150	-
8.8(Terminal Marking)	-	150	-
8.9.1(Typical Installation)	-	200	-
8.9.3(Typical Installation)	-	200	-
8.9.4c(Earthing)	-	500	-
9.10 (a)(Insulation Resistance test)	-	750	-
9.10 (b)(High Voltage test)	-	750	-
9.10 (c)(Measurement of Stator Resistance)	-	750	-
9.10 (d)(No Load Test at Rated Voltage)	-	750	-
9.10 (e)(Reduced voltage Running up test)	-	150	-
9.10 (f) & (g)(Locked Rotor Test)	-	150	-
9.10 (h)(Leakage current test)	-	150	-
9.10 (j)(Temperature Rise Test at Rated Voltage)	-	150	-
9.10 (k)(Temperature rise test at reduced voltage)	-	150	-
10.3(Hydrostatic Pressure Test)	-	500	-
11.1.1(Guarantee of Performance)	-	300	-
11.1.2(Guarantee of Performance)	-	150	-
11.1.3(Guarantee of Performance)	-	150	-
11.1.4(Guarantee of Performance)	-	150	-
11.1.5(Guarantee of Performance)	-	150	-
14(Marking)	-	150	-
8.7(Direction of Rotation)	-	150	-
8.9(Typical installation)	-	150	-
8.9.4.1(Earthing of the motor shall be done as per IS 9283 in accordance with the relevant provisions of IS 3043.)	-	300	-
8.9.4.2(In case of PVC pipes used as discharge pipe, a separate non corrosive, low resistance conductor from motor earth terminal to control panel earth terminal shall be provided for earthing.)	-	400	-
8.9.4.3(In case non corrosive GI pipes and clamps are used for the purpose of earthing the motor, earthing connection may be made to the discharge pipe clamp and to the control panel earth terminal)	-	200	-
8.6(Submersible cable)	-	200	-
8.6.1(Flat/Round cables as per IS694 shall be used)	-	200	-
8.6.2(The size of the conductor shall be adequate and suitable for contineous use under water and in air. the length of the cable shall be minimum 2 m externallly unless otherwise specified by the customer)	-	200	-
8.6.3(The size and of the cable should be suitably selected so that the voltage drop between control panel and the mptor terminal does not exeed three percent of the rated voltage)	-	300	-
8.6.4(In case a joint is required to be made between the lead cable supplied with the motor and the user’s cable, a detailed procedure to make water tight joining shall be supplied by the motor manufacturer.)	-	300	-
7.1.10(Voltage & Frequency variation)	-	300	-

31 Dec, 2026

-
Included w.e.f. 28-04-2022.

IS 8784 (1987)

Specification for thermocouple compensating cables (Second Revision)

21750 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(Type of thermocouple)	-	100	-
4.1(Conductor)	-	100	-
5(INSULATION AND SHEATH)	-	100	-
7(SHIELDING)	-	100	-
8.1(NOISE REDUCTION: Drain Wire)	-	100	-
8.2(NOISE REDUCTION)	-	100	-
9.1(DIMENSION : Single Wire)	-	100	-
9.1.1(DIMENSION : Single Wire (Tolerances))	-	100	-
9.1.2(DIMENSION : Single Wire (Ovality))	-	100	-
9.2.1(Thickness of Insulation )	-	100	-
9.2.2(Thickness of Sheath )	-	100	-
9.3(Dimension of cable )	-	100	-
10.1(Colour Code )	-	100	-
12.1(INFORMATION TO BE SUPPLIED BY THE MANUFACTURER)	-	100	-
11.1(ENVIRONMENTS FOR USE OF DIFFERENT THERMOCOUPLE COMPENSATING CABLES)	-	100	-
13.1(PACKING AND MARKING)	-	100	-
13.2(PACKING AND MARKING)	-	100	-
13.2.1(Standard Mark)	-	100	-
14.2(Thermal emf Test )	-	7000	-
14.3(Resistance Test)	-	1300	-
14.4.1( Thickness of Insulation)	-	500	-
14.4.2.1( Thickness of Sheath : Round )	-	500	-
14.4.2.2( Thickness of Sheath : Oval )	-	200	-
14.5(Insulation Resistance Test :Volume resistivity ( Before High Voltage test ))	-	1000	-
15.5(Insulation Resistance Test :Insulation resistance constant ( Before High Voltage test ))	-	500	-
14.5(Insulation Resistance Test: Volume resistivity ( After High Voltage test ))	-	1000	-
14.6(Drain Wire Continuity Test )	-	500	-
14.7(H.V. Test )	-	2000	-
14.8(Heat Shock Test)	-	1000	-
6(ARMOURING)	-	6000	-

31 Dec, 2026

-
Included w.e.f. 28-04-2022.

IS 5950 (1984)

Specification for shot firing cables (For Use Other Than In Shafts) (First Revision)

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
11.1(Manufacturer’s Identification)	-	100	-
11.2(Cable Code)	-	100	-
3.1(Conductor : Material -IS : 8130-2013)	-	200	-
4.1(Insulation : Material -IS : 5831-1984)	-	200	-
7.1(Insulation : Application )	-	200	-
7.2(Thickness of Insulation - average )	-	50	-
7.2(Thickness of Insulation - Min. )	-	50	-
7.3(Colour of Insulation)	-	50	-
5.1(Sheath : materail IS : 5831-1984)	-	50	-
8.1, 9.1 (c)(Nominal radial thickness of sheath)	-	50	-
8.2(Thickness of Sheath)	-	50	-
8.2(Thickness of Sheath - min.)	-	50	-
8.3(Colour of Sheath)	-	50	-
9.1 a)(Annealing test)	-	750	-
9.1 b)(Conductor resistance test)	-	750	-
9.1 d) i)(Insulation : Tensile strength)	-	250	-
9.1 d) i)(Insulation : elongation at break)	-	750	-
9.1 d) i)(Sheath : Tensile strength)	-	500	-
9.1 d) ii)(Ageing in air oven - Insulation : Tensile strength)	-	250	-
9.1 d) ii)(Ageing in air oven - Insulation : Tensile strength Variation)	-	250	-
9.1 d) ii)(Ageing in air oven - Insulation : elongation at break)	-	250	-
9.1 d) ii)(Ageing in air oven - Insulation : elongation variation at break)	-	250	-
9.1 d) ii)(Ageing in air oven - Sheath : Tensile strength)	-	250	-
9.1 d) ii)(Ageing in air oven - Sheath : Tensile strength variation )	-	500	-
9.1 d) ii)(Ageing in air oven - Sheath : elongation at break)	-	500	-
9.1 d) ii)(Ageing in air oven - Sheath : elongation variation at break)	-	250	-
9.1 d) iii )(Loss of mass test - insulation )	-	500	-
9.1 d) iii )(Loss of mass test - Sheath )	-	500	-
9.1 d) iv )(Hot deformation - insulation )	-	500	-
9.1 d) iv )(Hot deformation - sheath )	-	500	-
9.1 d) v )(Heat shock - insulation )	-	250	-
9.1 d) v )(Heat shock - Sheath )	-	250	-
9.1 d) vi )(Shrinkage - insulation )	-	100	-
9.1 d) vi )(Shrinkage : Crack observed - insulation )	-	100	-
9.1 d) vi )(Shrinkage - Sheath )	-	150	-
9.1 d) vi )(Shrinkage: Crack observed - Sheath )	-	100	-
10.2(Voltage test )	-	700	-
9.1 f)(Insulation resistance test: Volume resistivity )	-	500	-
9.1 f)(Insulation resistance test : IR constant)	-	500	-
10.4(Flammability Test )	-	450	-
12.1(packing )	-	50	-
12.2(Marking )	-	50	-
12.2.1(Standard marks )	-	50	-

31 Dec, 2026

-
Included w.e.f. 28-04-2022.

IS 1293 (2005)

Plugs and socket- outlets of rated voltage up to and including 250 volts and rated current up to 16 amperes

15000 View breakup
For BIS Sample: 1.5 times of BIS testing charges, for others: Rs.10,000/- upto 10A, Rs.15,000/- above 10A

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(RATINGS)	-	25.00	-
6.1(RATINGS)	-	25.00	-
6.2(RATINGS)	-	25.00	-
7(CLASSIFICATION)	-	25.00	-
7.1(CLASSIFICATION)	-	25.00	-
7.1.1 (CLASSIFICATION)	-	25.00	-
7.1.2(CLASSIFICATION)	-	25.00	-
7.1.3 (CLASSIFICATION)	-	25.00	-
7.1.4(CLASSIFICATION)	-	25.00	-
7.2(CLASSIFICATION)	-	25.00	-
7.2.1(CLASSIFICATION)	-	25.00	-
7.2.2 (CLASSIFICATION)	-	25.00	-
7.2.3(CLASSIFICATION)	-	25.00	-
7.2.4(CLASSIFICATION)	-	25.00	-
7.2.5(CLASSIFICATION)	-	25.00	-
7.3(CLASSIFICATION)	-	25.00	-
8.1(MARKING)	-	50.00	-
8.2(MARKING)	-	50.00	-
8.3(MARKING)	-	50.00	-
8.4(MARKING)	-	50.00	-
8.5(MARKING)	-	50.00	-
8.6(MARKING)	-	50.00	-
8.7(MARKING)	-	50.00	-
8.8(MARKING)	-	50.00	-
9.1(CHECKING OF DIMENSIONS)	-	50	-
9.2(CHECKING OF DIMENSIONS)	-	50	-
9.3(CHECKING OF DIMENSIONS)	-	50	-
10(PROTECTION AGAINST ELECTRIC SHOCK)	-	50	-
10.2(PROTECTION AGAINST ELECTRIC SHOCK)	-	50	-
10.2.1(PROTECTION AGAINST ELECTRIC SHOCK)	-	50.00	-
10.2.2(PROTECTION AGAINST ELECTRIC SHOCK)	-	50	-
10.3(PROTECTION AGAINST ELECTRIC SHOCK)	-	50.00	-
10.5(PROTECTION AGAINST ELECTRIC SHOCK)	-	50	-
10.6(PROTECTION AGAINST ELECTRIC SHOCK)	-	50	-
10.7(PROTECTION AGAINST ELECTRIC SHOCK)	-	50	-
11(PROVISION FOR EARTHING)	-	100	-
11.1(PROVISION FOR EARTHING)	-	50.00	-
11.2(PROVISION FOR EARTHING)	-	50.00	-
11.3(PROVISION FOR EARTHING)	-	50.00	-
11.4(PROVISION FOR EARTHING)	-	50.00	-
11.5(PROVISION FOR EARTHING)	-	50.00	-
12(TERMINALS)	-	50	-
12.1.1(TERMINALS)	-	50	-
12.1.2(TERMINALS)	-	50	-
12.2(TERMINALS)	-	50	-
12.2.1(TERMINALS)	-	50	-
12.2.2(TERMINALS)	-	50	-
12.2.3(TERMINALS)	-	50	-
12.2.4(TERMINALS)	-	50	-
12.2.5(TERMINALS)	-	50	-
12.2.6(TERMINALS)	-	50	-
12.2.7(TERMINALS)	-	50	-
12.2.8(TERMINALS)	-	50	-
12.2.9(TERMINALS)	-	50	-
12.2.10(TERMINALS)	-	50	-
12.2.11(TERMINALS)	-	50	-
12.3(TERMINALS)	-	50	-
12.3.1(TERMINALS)	-	50	-
12.3.2(TERMINALS)	-	50	-
12.3.3(TERMINALS)	-	50	-
12.3.4(TERMINALS)	-	50	-
12.3.5(TERMINALS)	-	50	-
12.3.6(TERMINALS)	-	50	-
12.3.7(TERMINALS)	-	50	-
12.3.8(TERMINALS)	-	50	-
12.3.9(TERMINALS)	-	50	-
12.3.10(TERMINALS)	-	50	-
12.3.11 (a)(TERMINALS)	-	50	-
12.3.11 (b)(TERMINALS)	-	50	-
12.3.12 (TERMINALS)	-	50	-
13.1(Construction of fixed Socket Outlets)	-	50	-
13.2(Construction of fixed Socket Outlets)	-	50	-
13.3(Construction of fixed Socket Outlets)	-	50	-
13.4(Construction of fixed Socket Outlets)	-	50	-
13.5(Construction of fixed Socket Outlets)	-	50	-
13.9(Construction of fixed Socket Outlets)	-	50	-
13.16(Construction of fixed Socket Outlets)	-	50	-
13.14(Construction of fixed Socket Outlets)	-	50	-
13.17(Construction of fixed Socket Outlets)	-	50	-
14(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	50	-
14.1(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	50	-
14.2(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	50	-
14.3(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	50	-
14.4(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	50	-
14.5(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	50	-
14.6(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	50	-
14.7(Construction of Plugs & Portables socket outlet )	-	50	-
14.8(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	50	-
14.9(Construction of Plugs & Portables socket outlet )	-	50	-
15.0(Interlocked socket-outlets)	-	300	-
16.1(Resistance to Ageing )	-	350.00	-
16.2(Resistance to Harmful Ingress of Water)	-	150.00	-
16.3(Resistance to humidity)	-	150.00	-
17(INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-	350.00	-
17.1.1(INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-	350.00	-
17.1.2(INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-	200	-
17.3(INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-	100	-
18.0(Operation of Earthing Contacts)	-	200.00	-
19(TEMPERATURE RISE)	-	350.00	-
20.0(Making & Breaking Capacity)	-	350.00	-
21.0(Normal Operation)	-	150	-
21(NORMAL OPERATION)	-	150	-
22(FORCE NECESSARY TO WITHDRAW THE PLUG)	-	100	-
22.1(Verification of Max withdrawal force)	-	100	-
22.2(Verification of Minimum withdrawal force)	-	100	-
23(FLEXIBLE CABLES AND THEIR CONNECTION)	-	100	-
23.1(FLEXIBLE CABLES AND THEIR CONNECTION)	-	100	-
23.2(FLEXIBLE CABLES AND THEIR CONNECTION)	-	100	-
23.3(FLEXIBLE CABLES AND THEIR CONNECTION)	-	100	-
23.4(FLEXIBLE CABLES AND THEIR CONNECTION)	-	100	-
24(MECHANICAL STRENGTH)	-	100	-
24.1(a) Mechanical Strength )	-	100	-
24.3(a) For surface type socket outlet)	-	100	-
24.6(b) For screwed glands of accessories other than ordinary)	-	100	-
24.8(c) For shuttered socket-outlets )	-	100	-
24.14.1(e)Verification of the Non-removal of Covers or Cover-Plates )	-	100	-
24.14.2(f)Verification of the Removal of Covers or Cover-Plates )	-	100	-
25.1(Resistance to heat)	-	200	-
25.2(Resistance to heat)	-	200	-
25.3(Resistance to heat)	-	100	-
25.4(Resistance to heat)	-	100	-
26(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	100	-
26.1(Screws, current carrying parts and connections)	-	100	-
26.2(Screws, current carrying parts and connections)	-	100	-
26.3(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	100	-
26.4(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	100	-
26.5(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	100	-
26.6(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	100	-
26.7(Screws, current carrying parts and connections)	-	100	-
27(CREEPAGE DISTANCES, CLEARANCES AND DISTANCES THROUGH SEALING COMPOUND)	-	100	-
27.1(Creepage distances, clearances and distances through sealing compound )	-	100	-
27.2(Creepage distances, clearances and distances through sealing compound )	-	100	-
27.3(Creepage distances, clearances and distances through sealing compound )	-	100	-
28.1.2(Addiitional tests for plugs with pins provided with insulating sleeves)	-	200	-
28.1.1(Glow-Wire Test )	-	200	-
28.2(Resistance to Tracking)	-	200	-
28.1(RESISTANCE OF INSULATING MATERIAL TO ABNORMAL HEAT, TO FIRE AND TO TRACKING)	-	100	-
29.0(Resistance to Rusting)	-	500	-
30(ADDITIONAL TESTS ON PINS PROVIDED WITH INSULATING SLEEVES)	-	100	-
30.1(Addiitional tests on pins provided with insulating sleeves - Pressure Test at High Temperature)	-	100	-
30.2(Addiitional tests on pins provided with insulating sleeves - Static Damp Heat Test)	-	100	-
30.3(Addiitional tests on pins provided with insulating sleeves - Impact Test at Low Temperature)	-	100	-
30.4(Addiitional tests on pins provided with insulating sleeves - Tests at Low Temperature)	-	100	-
10.1(Protection against Electric Shock)	-	100.00	-
10.4(Protection against Electric Shock)	-	50.00	-
13.7(CONSTRUCTION OF FIXED SOCKETOUTLETS)	-	50.00	-
13.7.1(CONSTRUCTION OF FIXED SOCKETOUTLETS)	-	50.00	-
13.7.2 (CONSTRUCTION OF FIXED SOCKETOUTLETS)	-	50.00	-
13.7.3 (CONSTRUCTION OF FIXED SOCKETOUTLETS)	-	50.00	-
13.8(CONSTRUCTION OF FIXED SOCKETOUTLETS)	-	50.00	-
13.11(CONSTRUCTION OF FIXED SOCKETOUTLETS)	-	50.00	-
13.12(CONSTRUCTION OF FIXED SOCKETOUTLETS)	-	50.00	-
13.13(CONSTRUCTION OF FIXED SOCKETOUTLETS)	-	50.00	-
13.15(CONSTRUCTION OF FIXED SOCKETOUTLETS)	-	50.00	-
13.18(CONSTRUCTION OF FIXED SOCKETOUTLETS)	-	50.00	-
13.19(CONSTRUCTION OF FIXED SOCKETOUTLETS)	-	50.00	-
13.2(CONSTRUCTION OF FIXED SOCKETOUTLETS)	-	50.00	-
13.21(CONSTRUCTION OF FIXED SOCKETOUTLETS)	-	50.00	-
13.22(CONSTRUCTION OF FIXED SOCKETOUTLETS)	-	50.00	-
13.23(CONSTRUCTION OF FIXED SOCKETOUTLETS)	-	50.00	-
13.1(Construction of fixed Socket Outlets)	-	50.00	-
14.1(Construction of Plugs & Portables socket outlet )	-	50.00	-
14.11(Construction of Plugs & Portables socket outlet )	-	50.00	-
14.12(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	50.00	-
14.13(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	50.00	-
14.14(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	50.00	-
14.15(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	50.00	-
14.16(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	50.00	-
14.17(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	50.00	-
14.18(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	50.00	-
14.19(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	50.00	-
14.2(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	50.00	-
14.21(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	50.00	-
14.22(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	50.00	-
14.23(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	50.00	-
14.23.1(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	50.00	-
14.23.2(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	50.00	-
14.24(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	50.00	-
14.25(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	50.00	-
16.2.1(RESISTANCE TO AGEING, TO HARMFUL INGRESS OF WATER AND TO HUMIDITY)	-	50.00	-
16.2.2(RESISTANCE TO AGEING, TO HARMFUL INGRESS OF WATER AND TO HUMIDITY)	-	50.00	-
16.2.3(RESISTANCE TO AGEING, TO HARMFUL INGRESS OF WATER AND TO HUMIDITY)	-	50.00	-
16.2.4(RESISTANCE TO AGEING, TO HARMFUL INGRESS OF WATER AND TO HUMIDITY)	-	50.00	-
17.2(INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-	100.00	-
24.2(For Portable single socket outlets/ plugs)	-	50.00	-
24.4(For Portable socket outlets/ plugs)	-	50.00	-
24.5(For Portable single socket outlets/ plugs)	-	50.00	-
24.7(For plug pins provided with insulating sleeves)	-	50.00	-
24.9(MECHANICAL STRENGTH)	-	50.00	-
24.1(For plugs)	-	50.00	-
24.11(For portable socket outlets having means for suspension on a wall)	-	50.00	-
24.12(For portable socket outlets having means for suspension on a wall)	-	50.00	-
24.13(MECHANICAL STRENGTH)	-	50.00	-
24.15(Verification of the Removal of Covers or Cover-Plates )	-	50.00	-
24.16(Verification of the Removal of Covers or Cover-Plates )	-	50.00	-
24.17(Verification of the Removal of Covers or Cover-Plates )	-	50.00	-
24.18(Verification of the Removal of Covers or Cover-Plates )	-	50.00	-

31 Dec, 2026

-
Included w.e.f. 28-04-2022

IS 9997 (1991)

Aluminium alloy redraw rods for electrical purposes - Specification (First Revision)

10000 View breakup
For BIS Samples – 1.5 times the BIS testing charges. For others : Rs. 10,000/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 6.1(Silicon)	-	444.44	-
Cl 6.1(Magnesium)	-	444.44	-
Cl 6.1(Iron)	-	444.44	-
Cl 6.1(Copper)	-	444.44	-
Cl 6.1(Manganese)	-	444.44	-
Cl 6.1(Chromium)	-	444.44	-
Cl 6.1(Zinc)	-	444.44	-
Cl 6.1(Boron)	-	444.44	-
Cl 6.1(Aluminium)	-	444.44	-
Cl.7("Mechanical properties Tensile Strength ")	-	750	-
Cl.7(Elongation)	-	750	-
Cl.8("Electrical Resistivity Resistivity ")	-	1000	-
Cl.8(Conductivity)	-	1000	-
Cl.9(Dimension and permissible variation)	-	1500	-
Cl.11(Freedom from defects)	-	1000	-

31 Dec, 2026

-
Included w.e.f. 10.05.2019

IS 9968 : Part 2 (2002)

Specification for elastomer - Insulated cables: Part 2 for working voltages from 3.3 kV up to and including 33 kV (First Revision)

33 KV

185000 View breakup
For BIS Samples – 1.5 times the BIS testing charges. For others : Rs. 1,85,000/- for single core Rs.2,40,000/- for three core For BIS Samples – 1.5 times the BIS testing charges. For others : Rs. 61,500/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(CONDUCTORS: Cables for Fixed Installation)	-	20	Rs. 185000.00 For single core Rs.240000.00 for three core
4.2(CONDUCTORS:Flexible Cables)	-	20	-
5(INSULATION)	-	20	-
6(SEMICONDUCTING COMPOUND)	-	20	-
7.1(Proofed Tape)	-	20	-
7.1(Proofed Tape: Thickness)	-	20	-
7.2(Polyethylene Terephthalate ( P E T P ) or Polypropylene Base Tape : Thickness)	-	20	-
7.3(Tape )	-	20	-
8(SCREENING)	-	20	-
9(CENTRE AND FILLERS)	-	20	-
10(ARMOUR)	-	50	-
11.1(Inner Sheath)	-	20	-
11.2(Outer Sheath)	-	20	-
12.1(Tapes)	-	20	-
12.2(Cords and Yarns)	-	20	-
13.1 & 13.2(CONSTRUCTION:CONDUCTORS-Cables for Fixed Installations/Flexible Cables)	-	20	-
13.3(Earthing Conductor)	-	50	-
13.3.1(Earthing Conductor)	-	30	-
13.4(Separator Tape)	-	20	-
14(CONDUCTOR SCREENING)	-	20	-
15.1(INSULATION : Application)	-	20	-
15.2(Thickness of Insulation)	-	500	-
15.3(Tolerance on Thickness of Insulation)	-	500	-
16.1(INSULATION SCREENING : Application)	-	20	-
16.2(INSULATION SCREENING : Parts )	-	20	-
16.3(INSULATION SCREENING : Non Metallic Parts )	-	20	-
16.4(INSULATION SCREENING : Metallic Parts )	-	20	-
17(CORE IDENTIFICATION)	-	20	-
17(CORE IDENTIFICATION: Unscreed cable )	-	50	-
18.1(LAYING UP OF CORES)	-	50	-
18.2(LAYING UP OF CORES : Flexible cable)	-	50	-
18.3(LAYING UP OF CORES : Binder Tape)	-	50	-
19.1(Inner Sheath : Application)	-	50	-
19.2(Thickness of Inner Sheath)	-	500	-
19.3(Inner Sheath : proofed tape)	-	30	-
20.1(ARMOURING: Application)	-	30	-
20.2(Type of Armour)	-	50	-
20.2 1.2(Direction of lay of armour)	-	20	-
20.2 1.3(Joint in armour)	-	20	-
20.2.2(Filling Factot )	-	20	-
20.2.2(Diameter of braiding)	-	20	-
20.2.2.1(Braiding material)	-	20	-
20.3(Substitution of the galvanized steel wires/formed)	-	20	-
21.1(OUTER SHEATH)	-	250	-
21.2(Coulor of Outer sheath)	-	250	-
21.3(Thickness of Outer Sheat: Average)	-	250	-
21.3(Thickness of Outer Sheat: Minimum)	-	250	-
22.1 a)1)(Annealing test (for copper) - IS 10810: Part 1)	-	1000	-
22.1 a)2)(Tensile test (for aluminium) -IS 10810: Part 2)	-	1500	-
22.1 a)3)(Wrapping Test (for aluminium) - IS 10810: Part 3)	-	1000	-
22.1 a)4)(Conductor resistance test)	-	2500	-
22.1 a)5)(Persulphate test (tinned copper conductor)- IS 10810: Part 4)	-	2500	-
22.1 b)1)(Test for Galvanized Steel Wires/Formed Wires 1) Dimensions -IS 10810: Part 36)	-	1500	-
22.1 b)2)i)(Test for Galvanized Steel Wires/Formed Wires 2) Tensile Strentgh -IS 10810: Part 37)	-	1250	-
22.1 b)2)ii)(Test for Galvanized Steel Wires/Formed Wires 2) Elongation at break -IS 10810: Part 37)	-	1250	-
22.1 b)2)iii)(Test for Galvanized Steel Wires/Formed Wires 3) Torsion (for round wires only) -IS 10810: Part 38)	-	1000	-
22.1 b)2)iv)(Test for Galvanized Steel Wires/Formed Wires 4) Winding (for strips only) -IS 10810: Part 39)	-	1000	-
22.1 b)2)v)(Test for Galvanized Steel Wires/Formed Wires 5) Zinc coating : Uniformity-IS 10810: Part 40)	-	500	-
22.1 b)2)vi)(Test for Galvanized Steel Wires/Formed Wires 5) Zinc coating : Mass -IS 10810: Part 41)	-	500	-
22.1 b)2) vii) (Resistivity - IS 10810: Part 42)	-	1000	-
22.1 c)2)(Physical Tests for Insulation : Tensile Strenth - IS 10810: Part 7)	-	500	-
22.1 c)2)(Physical Tests for Insulation : Elongation - IS 10810: Part 7)	-	500	-
22.1 c)2)(Physical Tests for Sheath : Tensile Strenth - IS 10810: Part 7)	-	500	-
22.1 c)2)(Physical Tests for Sheath : Elongation - IS 10810: Part 7)	-	500	-
22.1 c)3)(Physical Tests for Insulation ( Ageing in air oven): Tensile Strenth - IS 10810: Part 11)	-	800	-
22.1 c)3)(Physical Tests for Insulation ( Ageing in air oven): Tensile Strenth Variation - IS 10810: Part 12)	-	800	-
22.1 c)3)(Physical Tests for Insulation( Ageing in air oven) : Elongation - IS 10810: Part 11)	-	800	-
22.1 c)3)(Physical Tests for Insulation( Ageing in air oven) : Elongation variation - IS 10810: Part 12)	-	800	-
22.1 c)3)(Physical Tests for Sheath( Ageing in air oven) : Tensile Strenth - IS 10810: Part 11)	-	800	-
22.1 c)3)(Physical Tests for Sheath( Ageing in air oven) : Tensile Strenth variation - IS 10810: Part 12)	-	800	-
22.1 c)3)(Physical Tests for Sheath ( Ageing in air oven): Elongation - IS 10810: Part 11)	-	800	-
22.1 c)3)(Physical Tests for Sheath ( Ageing in air oven): Elongation variation - IS 10810: Part 12)	-	800	-
22.1 c)4)(Physical Tests for Insulation ( Ageing in air bomb): Tensile Strenth variation - IS 10810: Part 56)	-	800	-
22.1 c)4)(Physical Tests for Insulation( Ageing in air bomb) : Elongation variation - IS 10810: Part 56)	-	800	-
22.1 c)4)(Physical Tests for Sheath(Ageing in air bomb) : Tensile Strenth variation - IS 10810: Part 56)	-	800	-
22.1 c)4)(Physical Tests for Sheath ( Ageing in air bomb): Elongation variation - IS 10810: Part 56)	-	800	-
22.1 c)5)(Physical Tests for Insulation :Hot set Elongation - IS 10810: Part 30)	-	750	-
22.1 c)5)(Physical Tests for Insulation :Permanent set - IS 10810: Part 30)	-	750	-
22.1 c)5)(Physical Tests for Sheath :Hot set Elongation - IS 10810: Part 30)	-	750	-
22.1 c)5)(Physical Tests for Sheath :Permanent set - IS 10810: Part 30)	-	750	-
22.1 c)6)(Physical Tests for Sheath(Oil resistance test) : Tensile Strenth Variation - IS 10810: Part 31)	-	1500	-
22.1 c)6)(Physical Tests for Sheath ( Oil resistance test): Elongation Variation - IS 10810: Part 31)	-	1500	-
22.1 c)7)(Tear Resistance test - IS 10810: Part 17)	-	2000	-
22.1 c)8)(Shrinkage : Insulation - IS 10810: Part 12)	-	250	-
22.1 c)8)(Shrinkage test- Crack observed : Insulation - IS 10810: Part 13)	-	250	-
22.1 c)8)(Shrinkage test : Sheath - IS 10810: Part 12)	-	250	-
22.1 c)9)(Hot deformation test : Insulation - IS 10810: Part 15)	-	350	-
22.1 c)9)(Hot deformation test : Sheath - IS 10810: Part 15)	-	350	-
22.1 c)10)(Loss of mass in air oven : Insulation - IS 10810: Part 10)	-	1500	-
22.1 c)10)(Loss of mass in air oven : Sheath - IS 10810: Part 10)	-	1500	-
22.1 c)11)(Heat shock : Insulation - IS 10810: Part 14)	-	250	-
22.1 c)11)(Heat shock : Sheath - IS 10810: Part 14)	-	250	-
22.1 c)12)(Thermal stability : Insulation - IS 10810: Part 60)	-	350	-
22.1 c)12)(Thermal stability : Sheath - IS 10810: Part 60)	-	350	-
22.1 d)(Insulation Resistance Test: Volume resistivity )	-	500	-
22.1 d)(Insulation Resistance Test: Insulation resistance constant )	-	500	-
22.1 e)(Partial Discharge Test)	-	32000	-
22.1 f)(Bending Test Followed by Partial Discharge Test)	-	500	-
22.1 g)(Dielectric Power Factor Test 1) As a function of Voltage)	-	16000	-
22.1 g)(Dielectric Power Factor Test 1) As a function of temperature)	-	16000	-
22.1 h)(Heating Cycle Test)	-	32000	-
22.1 j)(Impulse Withstand Test)	-	35000	-
22.1 k)(High Voltage Test for Four Hours)	-	5000	-
22.1 m)(Water Absorption Test - IS 10810: Part 28)	-	3000	-
22.1 n)(Flammability)	-	1000	-
24.1(Manufacturer's Identification)	-	20	-
24.2(Voltage Identification)	-	20	-
24.3(Cable Code)	-	30	-
25.2.1(Marking on drum )	-	20	-
25.2.2(BIS Certification Marking)	-	20	-
22.4 (a)(Ozone Resistance Test)	-	2000	-
22.4 (b)(Cold impacts test for PVC sheath)	-	1000	-

31 Dec, 2026

-
Included w.e.f. 10.05.2019 Excluding: Cl. 22.4a) Ozone Resistance Test ( Optional test)

IS 16018 (2012)

Wheeled fire extinguishers - Performance and construction - Specification

133550 View breakup
For BIS Samples – 1.5 times the BIS testing charges. For others : Rs.40000/- (except fire performance test) Fire Performance test: Rs.12000/- for 1A Class, Rs.15000/- for 2A Class, Rs.16000/- for 3A Class, Rs.25000/- for 4A Class, Rs.30000/- for 6A Class, Rs.33000/- for 10A Class, Rs.47000/- for 15A Class, Rs.68000/- for 20A Class, Rs.4500/- for 8B Class, Rs.6000/- for 13B Class, Rs.9000/- for 21B Class, Rs.12000/- for 34B Class, Rs.32000/- for 55 B Class, Rs.36500/- for 70 B Class, Rs.46000/- for 89 B Class, Rs.51500/- for 113 B Class, Rs.61000/- for 144B Class, Rs.65500/- for 183B Class, Rs.76000/- for 233B Class, - Rs. 18,000/-.for Electrical Conductivity of extinguisher Discharge Rs. 2000/- Fill density and filling tolerances For Extinguisher Media of: IS 14609 ,Rs.14500/- IS 4308, Rs.8500/- IS 4989, Rs.20000/- IS 4989(Part 4), Rs.26500/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 4(Types of Wheeled Fire Extinguishers)	-	250	-
Cl 5.3(Fill Density)	-	500	-
Cl 5.4(Filling Tolerance)	-	500	-
Cl 5.5.1(Nominal Charge)	-	500	-
Cl 6.1(Operating Temperature)	-	500	-
Cl 6.2.1(Effective Discharge Time)	-	750	-
Cl 6.2.2(Bulk Range)	-	750	-
Cl 6.3(Resistance To Temperature Changes)	-	3000	-
Cl 6.5(Intermittent Discharge Test)	-	1250	-
Cl 7.6(Resistance to Corrosion)	-	6000	-
Cl 7.8(Intermittent Discharge Test)	-	0	-
Cl 8.1(Rating Sutability for Various Classes of Fire)	-	76000	Rs. 57550/- except fire performance test fire performance test 12K for 1A 15K=2A 16K=3A 25K=4A 30K=6A 33K=10A 47K=15A 68K=20A 4500=8B 6K =13B 9K=21B 12K=34B 32K=55B 365K=70B 46K=89B 515K =113B 61K=144B 655K=183B 76K=233B Class
Cl 9.1.1(Pressure Cycling Test)	-	0	-
Cl 9.2(Low Pressure Extinguishers)	-	1000	-
Cl 9.2.5(Welded Low Carbon Steel Cylinder)	-	1000	-
Cl 9.2.6(Stainless Steel Cylinder)	-	1000	-
Cl 9.2.7(Aluminium Cylinder)	-	1000	-
Cl 9.3(Carrying Handle)	-	500	-
Cl 9.5(Caps, Valves and Closures)	-	500	-
Cl 9.8.6(Test for Exposure to Extinguishing Medium)	-	2500	-
Cl 9.9(Hose Assemblies)	-	500	-
Cl 9.11(Safety Locking Devices)	-	500	-
Cl 9.13(Water Based Extinguishers)	-	1000	-
Cl 9.12.1(General )	-	500	-
Cl 10.1(Colour)	-	250	-
Clause 8.4.1.1(Sulphur)	-	500	-
Clause 8.4.1.1(Phosphorus)	-	500	-
Clause 8.4.1.1(Carbon)	-	500	-
Clause 8.4.2.2(Carbon)	-	500	-
Cl 9.1(High Pressure Extinguishers)	-	1000	-
Cl 9.8.5(Normally Non Pressurized Components)	-	500	-
6.6.1(External Corrosion Test)	-	0	-
8.18.1(Carriage Assembly)	-	750	-
8.7.1(Caps valves and closure)	-	500	-
8.11.1(Requirement of the Discharge Assemblies)	-	1050	-
8.15(Safety Locking Devices)	-	1000	-
8.17(Dip tubes and Filters for water based Extinguisher)	-	1000	-
Cl no 8.1(16018 :2012)	-	1500	-
9.1(Colour)	-	250	-
8.2(High Pressure Cylinder)	-	1000	-
6.6.2(Internal Corrosion Test)	-	2500	-
6.7.1(Observation of Durability Test after Nozzle Drop Test and Displaced Test)	-	1000	-
6.7.2(Durability test of trailer mounted fire extinguisher)	-	2000	-
8.3.2(Deformation Test)	-	1500	-
8.6(Minimum wall thickness of the cylinder)	-	1000	-
6.4(Retention of charge)	-	1000	-
8.14(Method of operation for gas cartridge type extinguishers)	-	1000	-
8.14(Method of operation for carbon dioxide extinguishers)	-	1000	-
Cl no 6.8(16018 :2012)	-	18000	only for Water and foam type fire extinguisher (Electrical Conductivity Test)
8.13.1(Horn of carbon dioxide extinguisher)	-	1000	-
8.12(Control valve test)	-	1000	-
8.8(Safety and Anti-overfill devices)	-	750	-
8.3.1(Burst Test)	-	1000	-
8.13.3(Load test on discharge horn)	-	1000	-
8.9.2(Leakage Test)	-	1000	-
Cl no 7.1(16018 :2012)	-	76000	performance test 12K for 1A,15K for 2A,16K for 3A ,25K for 4A,30K for 6A,33K for 10A,47K for 15A,68K for20A,4500 for8B,6K for 13B,9K for 21B,12K for 34B,32K for 55B,365K for 70B,46Kfor 89B,515K for 113B,61K for 144B,655K for 183B 76K for 233B CLASS
8.3.3(Pressure cycling Test)	-	2500	-
Cl no 8.3(16018 :2012)	-	250	-
7.3(Class B and Class C Fire Tests)	-	76000	performance test 12K for 1A,15K for 2A,16K for 3A ,25K for 4A,30K for 6A,33K for 10A,47K for 15A,68K for20A,4500 for8B,6K for 13B,9K for 21B,12K for 34B,32K for 55B,365K for 70B,46Kfor 89B,515K for 113B,61K for 144B,655K for 183B 76K for 233B CLASS
Cl-7.2 (Amendment -1)(Class A, Class B and Class C Fire Test)	-	76000	performance test 12K for 1A,15K for 2A,16K for 3A ,25K for 4A,30K for 6A,33K for 10A,47K for 15A,68K for20A,4500 for8B,6K for 13B,9K for 21B,12K for 34B,32K for 55B,365K for 70B,46Kfor 89B,515K for 113B,61K for 144B,655K for 183B 76K for 233B CLASS
7.2(Class 'A' Fire Test 1A)	-	76000	performance test 12K for 1A,15K for 2A,16K for 3A ,25K for 4A,30K for 6A,33K for 10A,47K for 15A,68K for20A,4500 for8B,6K for 13B,9K for 21B,12K for 34B,32K for 55B,365K for 70B,46Kfor 89B,515K for 113B,61K for 144B,655K for 183B 76K for 233B CLASS
7.2(Class 'A' Fire Test 2A)	-	76000	performance test 12K for 1A,15K for 2A,16K for 3A ,25K for 4A,30K for 6A,33K for 10A,47K for 15A,68K for20A,4500 for8B,6K for 13B,9K for 21B,12K for 34B,32K for 55B,365K for 70B,46Kfor 89B,515K for 113B,61K for 144B,655K for 183B 76K for 233B CLASS
7.2(Class 'A' Fire Test 3A)	-	76000	performance test 12K for 1A,15K for 2A,16K for 3A ,25K for 4A,30K for 6A,33K for 10A,47K for 15A,68K for20A,4500 for8B,6K for 13B,9K for 21B,12K for 34B,32K for 55B,365K for 70B,46Kfor 89B,515K for 113B,61K for 144B,655K for 183B 76K for 233B CLASS
7.2(Class 'A' Fire Test 4A)	-	76000	performance test 12K for 1A,15K for 2A,16K for 3A ,25K for 4A,30K for 6A,33K for 10A,47K for 15A,68K for20A,4500 for8B,6K for 13B,9K for 21B,12K for 34B,32K for 55B,365K for 70B,46Kfor 89B,515K for 113B,61K for 144B,655K for 183B 76K for 233B CLASS
7.2(Class 'A' Fire Test 6A)	-	76000	performance test 12K for 1A,15K for 2A,16K for 3A ,25K for 4A,30K for 6A,33K for 10A,47K for 15A,68K for20A,4500 for8B,6K for 13B,9K for 21B,12K for 34B,32K for 55B,365K for 70B,46Kfor 89B,515K for 113B,61K for 144B,655K for 183B 76K for 233B CLASS
7.2(Class 'A' Fire Test 10A)	-	76000	performance test 12K for 1A,15K for 2A,16K for 3A ,25K for 4A,30K for 6A,33K for 10A,47K for 15A,68K for20A,4500 for8B,6K for 13B,9K for 21B,12K for 34B,32K for 55B,365K for 70B,46Kfor 89B,515K for 113B,61K for 144B,655K for 183B 76K for 233B CLASS
7.2(Class 'A' Fire Test 15A)	-	76000	performance test 12K for 1A,15K for 2A,16K for 3A ,25K for 4A,30K for 6A,33K for 10A,47K for 15A,68K for20A,4500 for8B,6K for 13B,9K for 21B,12K for 34B,32K for 55B,365K for 70B,46Kfor 89B,515K for 113B,61K for 144B,655K for 183B 76K for 233B CLASS
7.2(Class 'A' Fire Test 20A)	-	76000	performance test 12K for 1A,15K for 2A,16K for 3A ,25K for 4A,30K for 6A,33K for 10A,47K for 15A,68K for20A,4500 for8B,6K for 13B,9K for 21B,12K for 34B,32K for 55B,365K for 70B,46Kfor 89B,515K for 113B,61K for 144B,655K for 183B 76K for 233B CLASS
7.2(Class 'B' Fire Test 8B)	-	76000	performance test 12K for 1A,15K for 2A,16K for 3A ,25K for 4A,30K for 6A,33K for 10A,47K for 15A,68K for20A,4500 for8B,6K for 13B,9K for 21B,12K for 34B,32K for 55B,365K for 70B,46Kfor 89B,515K for 113B,61K for 144B,655K for 183B 76K for 233B CLASS
7.2(Class 'B' Fire Test 13B)	-	76000	performance test 12K for 1A,15K for 2A,16K for 3A ,25K for 4A,30K for 6A,33K for 10A,47K for 15A,68K for20A,4500 for8B,6K for 13B,9K for 21B,12K for 34B,32K for 55B,365K for 70B,46Kfor 89B,515K for 113B,61K for 144B,655K for 183B 76K for 233B CLASS
7.2(Class 'B' Fire Test 21B)	-	76000	performance test 12K for 1A,15K for 2A,16K for 3A ,25K for 4A,30K for 6A,33K for 10A,47K for 15A,68K for20A,4500 for8B,6K for 13B,9K for 21B,12K for 34B,32K for 55B,365K for 70B,46Kfor 89B,515K for 113B,61K for 144B,655K for 183B 76K for 233B CLASS
7.2(Class 'B' Fire Test 34B)	-	76000	performance test 12K for 1A,15K for 2A,16K for 3A ,25K for 4A,30K for 6A,33K for 10A,47K for 15A,68K for20A,4500 for8B,6K for 13B,9K for 21B,12K for 34B,32K for 55B,365K for 70B,46Kfor 89B,515K for 113B,61K for 144B,655K for 183B 76K for 233B CLASS
7.2(Class 'B' Fire Test 55B)	-	76000	performance test 12K for 1A,15K for 2A,16K for 3A ,25K for 4A,30K for 6A,33K for 10A,47K for 15A,68K for20A,4500 for8B,6K for 13B,9K for 21B,12K for 34B,32K for 55B,365K for 70B,46Kfor 89B,515K for 113B,61K for 144B,655K for 183B 76K for 233B CLASS
7.2(Class 'B' Fire Test 70B)	-	76000	performance test 12K for 1A,15K for 2A,16K for 3A ,25K for 4A,30K for 6A,33K for 10A,47K for 15A,68K for20A,4500 for8B,6K for 13B,9K for 21B,12K for 34B,32K for 55B,365K for 70B,46Kfor 89B,515K for 113B,61K for 144B,655K for 183B 76K for 233B CLASS
7.2(Class 'B' Fire Test 89B)	-	76000	performance test 12K for 1A,15K for 2A,16K for 3A ,25K for 4A,30K for 6A,33K for 10A,47K for 15A,68K for20A,4500 for8B,6K for 13B,9K for 21B,12K for 34B,32K for 55B,365K for 70B,46Kfor 89B,515K for 113B,61K for 144B,655K for 183B 76K for 233B CLASS
7.2(Class 'B' Fire Test 113B)	-	76000	performance test 12K for 1A,15K for 2A,16K for 3A ,25K for 4A,30K for 6A,33K for 10A,47K for 15A,68K for20A,4500 for8B,6K for 13B,9K for 21B,12K for 34B,32K for 55B,365K for 70B,46Kfor 89B,515K for 113B,61K for 144B,655K for 183B 76K for 233B CLASS
7.2(Class 'B' Fire Test 144B)	-	76000	performance test 12K for 1A,15K for 2A,16K for 3A ,25K for 4A,30K for 6A,33K for 10A,47K for 15A,68K for20A,4500 for8B,6K for 13B,9K for 21B,12K for 34B,32K for 55B,365K for 70B,46Kfor 89B,515K for 113B,61K for 144B,655K for 183B 76K for 233B CLASS
7.2(Class 'B' Fire Test 183B)	-	76000	performance test 12K for 1A,15K for 2A,16K for 3A ,25K for 4A,30K for 6A,33K for 10A,47K for 15A,68K for20A,4500 for8B,6K for 13B,9K for 21B,12K for 34B,32K for 55B,365K for 70B,46Kfor 89B,515K for 113B,61K for 144B,655K for 183B 76K for 233B CLASS
7.2(Class 'B' Fire Test 233B)	-	76000	performance test 12K for 1A,15K for 2A,16K for 3A ,25K for 4A,30K for 6A,33K for 10A,47K for 15A,68K for20A,4500 for8B,6K for 13B,9K for 21B,12K for 34B,32K for 55B,365K for 70B,46Kfor 89B,515K for 113B,61K for 144B,655K for 183B 76K for 233B CLASS
8.18.3(Hose Retaining Unit)	-	100	-
8.18.2(Mobility)	-	100	-
8.16(Pressure gauges for low pressure extinguishers)	-	100	-
8.13.2(Requirement to prevent loosening or detachment)	-	100	-
8.11.3(Requirement of burst pressure of hose assemblies for carbon dioxide fire extinguishers)	-	100	-
8.11.3(Requirement of burst pressure of hose assemblies for except carbon dioxide fire extinguishers)	-	250	-
8.11.2(Requirement of hose and coupling system)	-	250	-
8.7.6(Requirement of edges and surfaces)	-	250	-
8.7.5(Requirement of burst test of cap,valve and closure)	-	250	-
8.7.4(Requirement of collar)	-	250	-
8.7.3(Requirement of filling opening diameter)	-	250	-
8.7.2(Requirement of threaded connections on cylinder)	-	250	-
8.1.7(Drain Plug)	-	1500	-
8.1.6(Thread of Plastic Components)	-	1500	-
8.1.4(Construction Requirement)	-	1500	-
8.1.3(Requirement of Welding)	-	1500	-
8.1.2(Leakage Observation during conditioning Test)	-	1500	-
5.5.2(Gross Mass)	-	250	-
6.7.4(Displaced Test)	-	250	-
6.7.3(Nozzle Drop Test)	-	250	-
3.16 and 8.1.1(Determination of maximum service pressure)	-	250	-
3.19 and 8.3(Determination of Service Pressure)	-	250	-
Cl no 4(16018 :2012)	-	250	-
Cl no 5.3(16018 :2012)	-	500	-
Cl no 5.4(16018 :2012)	-	500	-
Cl no 5.5.1(16018 :2012)	-	500	-
Cl no 5.5.2(16018 :2012)	-	250	-
Cl no 6.1(16018 :2012)	-	500	-
Cl no 6.2.1 & 6.2.1.1(16018 :2012)	-	750	-
Cl no 6.2.2 & 6.2.2.1(16018 :2012)	-	750	-
Cl no 6.3 & 6.3.1(16018 :2012)	-	4000	-
Cl no 6.4(16018 :2012)	-	1000	-
Cl no 6.5(16018 :2012)	-	1250	-
Cl no 6.6.1(16018 :2012)	-	7500	-
Cl no 6.6.2(16018 :2012)	-	2500	-
Cl no 6.7(16018 :2012)	-	250	-
Cl no 8.2(16018 :2012)	-	1000	-
Cl no 8.3.1(16018 :2012 Burst test)	-	1000	-
Cl no 8.3.2(16018 :2012)	-	1500	-
Cl no 8.4.1(Welded low carbon steel)	-	500	-
Cl no 8.4.2.2(16018 :2012)	-	500	-
Cl no 8.6(16018 :2012)	-	1000	-
Cl no 8.7(16018 :2012)	-	250	-
Cl no 8.7.2(16018 :2012)	-	250	-
Cl no 8.7.4(16018 :2012)	-	250	-
Cl no 8.7.5(16018 :2012)	-	250	-
Cl no 8.7.6(16018 :2012)	-	250	-
Cl no 8.8.1(16018 :2012)	-	250	-
Cl no 8.8.2(16018 :2012)	-	250	-
Cl no 8.9.2(16018 :2012)	-	1000	-
Cl no 8.12(16018 :2012)	-	1000	-
Cl no 8.15(16018 :2012)	-	1000	-
Cl no 8.14(16018 :2012)	-	1000	-
Cl no 8.17(16018 :2012)	-	1000	-
Cl no 8.18.1(16018 :2012)	-	750	-
Cl no 8.18.2(16018 :2012)	-	250	-
Cl no 8.18.3(16018 :2012)	-	250	-
Cl no 9.1(16018 :2012)	-	1000	-
Cl no 9.2(16018 :2012)	-	1000	-
Cl no 8.4.2(16018 :2012)	-	500	-
Cl no 8.11.1 to 8.11.3(Discharge assembly)	-	1050	-
cl-8.9.1(Low pressure cylinder)	-	250	-

31 Dec, 2026

-
Stainless steel cylinder (Cl. 8.4.2), CO2 cylinders (Cl. 8.4.3), Aluminium cylinder (Cl. 8.5), Class D Fire test (Cl. 7.3), Requirement for plastic components (Cl. 8.10), Pressure gauges for low pressure extinguisher (Cl. 8.16), Gasket and O-rings (Cl. 8.19)

IS 1534 : Part 1 (1977)

Ballasts for fluorescent lamps:Part 1 For switch start circuits

20000 View breakup
For BIS Samples – 1.5 times the BIS testing charges. For others : 20,000/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(General Design, Construction and workmanship)	-	500	ok
4(Terminals For External Wiring)	-	2000	ok
5(Screws, Current-Carrying Parts And Connections)	-	2000	ok
6(Provision For Earthing)	-	1000	ok
7(Creepage Distances and Clearances)	-	500	ok
8(Marking)	-	500	ok
9.4(Visual Examination)	-	2500	ok
9.5(Protection against Accidental Contacts and Electric Shock)	-	750	ok
9.6(Voltage Across Capacitors)	-	500	ok
9.7(Moisture Resistance and Insulation)	-	2000	ok
9.8(Test for Thermal Endurance Of Windings)	-	2000	ok
9.9(Test For Limitations Of Ballast Heating)	-	1000	ok
9.1(Test for Mechanical Strength)	-	750	ok
9.11(Resistance To Heat)	-	1000	ok
9.12(Resistance To Corrosion)	-	500	ok
9.13(Performance)	-	3000	ok

31 Dec, 2026

-
Included w.e.f. 10.05.2019

IS 1554 : Part 2 (1988)

Specification for pvc insulated (Heavy Duty) electric cables: Part 2 for working voltages from 3.3 kV up to and including 11 kV (Second Revision)

11 kv

175000 View breakup
For BIS Samples – 1.5 times the BIS testing charges. For others : Rs. 1,75,000/- for type test of single core cable. Rs. 2,15,000/- for type test of three core cable Rs. 9000/- for additional test for C1(FR) Rs. 13000/- for additional test for C2(FR-LSH) Rs. 1200/- for copper purity

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(CONDUCTOR)	-	30	Rs 175000 for type test of single core Rs 215000 for type test of three core Rs.9000 for additional test for C1 (FR) Rs.13000 For Additional Test For C2 (FR-LSH) Rs.1200 for copper purity test.
3.1.1(CONDUCTOR)	-	30	-
4.1(INSULATION)	-	30	-
5.1(SCREENING)	-	30	-
5.1.1(Non-magnetic Metallic Tape for SingleCore Unscreened and Unarmoured Cables)	-	50	-
6.1(FILLERS AND INNER SHEATH)	-	30	-
6.2(FILLERS AND INNER SHEATH)	-	30	-
7.1(ARMOURING)	-	30	-
7.2(ARMOURING)	-	30	-
8.1(OUTER SHEATH)	-	30	-
9.1(CONDUCTOR)	-	30	-
9.2(CONDUCTOR)	-	30	-
10.1(CONDUCTOR SCREENING)	-	30	-
11.1(INSULATION)	-	30	-
11.2(INSULATION : Thickness of Insulation)	-	30	-
11.3(INSULATION : Tolerance on Thickness of Insulation)	-	30	-
11.4(INSULATION : Application of Insulation)	-	30	-
12.1(INSULATION SCREENING)	-	30	-
12.2(INSULATION SCREENING)	-	30	-
12.4(INSULATION SCREENING)	-	30	-
13.1(CORE IDENTIFICATION)	-	30	-
13.1.1(CORE IDENTIFICATION)	-	30	-
14.1(LAYING UP OF CORES)	-	30	-
15.1(INNER SHEATH (COMMON COVERING))	-	500	-
15.2(INNER SHEATH (COMMON COVERING))	-	500	-
15.3(INNER SHEATH (COMMON COVERING))	-	500	-
15.4(INNER SHEATH (COMMON COVERING) : Thickness of Inner Sheath)	-	500	-
15.4.1(INNER SHEATH (COMMON COVERING) : Thickness of Inner Sheath)	-	500	-
16.1.1(ARMOURING : Application)	-	30	-
16.1.2(ARMOURING : Application)	-	30	-
16.1.3(ARMOURING : Direction of lay )	-	30	-
16.1.4(ARMOURING : Application)	-	30	-
16.2.1(ARMOURING : Type of Armour)	-	30	-
16.2.2(ARMOURING : Type of Armour)	-	30	-
16.3(Armouring : Dimensions -Wire Diameter)	-	1000	-
16.3(Armouring : Dimensions -Formed wire )	-	1000	-
16.4(ARMOURING : Joints)	-	30	-
16.5(ARMOURING : Resistance)	-	1000	-
13.6 a)(ARMOURING: Tensile Strength)	-	750	-
13.6 b)(ARMOURING: Elongation )	-	750	-
13.6 c)(ARMOURING: Torsion Test (For round wire ) )	-	500	-
13.6 d)(ARMOURING: Winding Test(For formed wire))	-	500	-
13.6 e)(ARMOURING: Uniformity of zinc coating)	-	500	-
13.6 f)(ARMOURING: Mass of zinc coating )	-	500	-
13.6 g)(ARMOURING: Resistivity)	-	1000	-
17.1(OUTER SHEATH)	-	30	-
17.2(OUTER SHEATH : colour )	-	30	-
17.3.1(Thickness of Outer Sheath : Unarmoured Cables)	-	500	-
17.3.2(Thickness of Outer Sheath : Armoured Cables)	-	500	-
18.1 a) 1)(Tests on Conductor : Annealing test (for copper))	-	1000	-
18.1 a) 2)(Tensile test (for aluminium) - Before stranding )	-	500	-
18.1 a) 2)(Tensile test (for aluminium) - After stranding )	-	500	-
18.1 a) 3)(Tests on Conductor : Wrapping test ( for aluminium))	-	500	-
18.1 a)4)(Tests on conductor : Conductor resistance test - Main conductor )	-	750	-
18.1 a)4)(Resistance test - Neutral conductor )	-	750	-
18.1 d) 1)(Phyaical tests for insulation : Tensile Test)	-	750	-
18.1 d) 1)(Phyaical tests for insulation : Elongation )	-	750	-
18.1 d) 1)(Physical tests for sheath : Tensile stregth )	-	750	-
18.1 d) 1)(Physical tests for sheath : Elongation )	-	750	-
18.1 d) 2)(Phyaical tests for insulation- Ageing in air Oven : Tensile Test)	-	1250	-
18.1 d) 2)(Phyaical tests for insulation - Ageing in air oven : Elongation )	-	1250	-
18.1 d) 2)(Phyaical tests for insulation - Ageing in air Oven : Tensile Variation )	-	1250	-
18.1 d) 2)(Phyaical tests for insulation- Ageing in air oven : Elongation Variation )	-	1250	-
18.1 d) 2)(Physical tests for outer sheath- Ageing in air oven : Tensile stregth )	-	1250	-
18.1 d) 2)(Physical tests for outer sheath -Ageing in air oven : Elongation )	-	1250	-
18.1 d) 2)(Physical tests for outer sheath- Ageing in air oven : Tensile stregth Variation )	-	1250	-
18.1 d) 2)(Physical tests for outer sheath -Ageing in air oven : Elongation Variation )	-	1250	-
18.1 d) 3)(Phyaical tests for insulation : Shrinkage )	-	500	-
18.1 d) 3)(Phyaical tests for insulation : Shrinkage - Crack observed )	-	500	-
18.1 d) 3)(Phyaical tests for Sheath : Shrinkage - Crack observed )	-	500	-
18.1 d) 3)(Phyaical tests for Sheath : Shrinkage )	-	500	-
18.1 d) 4)(Hot deformation : Insulation )	-	750	-
18.1 d) 4)(Hot deformation : Sheath )	-	750	-
18.1 d) 5)( Loss of mass in air oven- Insulation )	-	1500	-
18.1 d) 5)( Loss of mass in air oven- sheath )	-	1500	-
18.1 d) 6)(Heat shock test- Insulation )	-	250	-
18.1 d) 6)(Heat shock test- sheath )	-	250	-
18.1 d) 7)(Thermal stability- insulation )	-	750	-
18.1 d) 7)(Thermal stability- Sheath )	-	750	-
18.1 d) 8)(Water absorption (gravimetric)(for insulation, where applicable))	-	2000	-
18.1 e)(Insulation resistance test : Volume Resistivity )	-	1000	-
18.1 e)(Insulation resistance test : IR Constant )	-	1000	-
19.2(Partial discharge test)	-	27000	-
19.3(Bending test)	-	500	-
19.4(Dielectric power factor test)	-	9500	-
19.4(Dielectric power factor test)	-	9500	-
19.5(Heating cycle test)	-	27000	-
19.6(Impulse withstand test)	-	32000	-
19.7(High voltage test)	-	4000	-
19.8(Flammability test)	-	750	-
19.9(Oxygen Index Test)	-	3000	-
19.10(Flame Retardance Test on Single Cables)	-	1500	-
19.11(Flame Retardance Test on Bunched Cables)	-	3000	-
19.13(Test for Halogen Acid Gas Evolution)	-	3000	-
19.14(Temperature Index)	-	3000	-
18.4(Optional Test : Cold Impact )	-	500	-
20.1(IDENTIFICATION : Manufacturer's Identification)	-	20	-
20.2(IDENTIFICATION : Cable Identification)	-	20	-
20.3(IDENTIFICATION : Cable Code)	-	20	-

31 Dec, 2026

-
Included w.e.f. 10.05.2019

IS 12592 (2002)

Precast concrete manhole cover and frame - Specification (First Revision)

15800 View breakup
For BIS Samples – 1.5 times the BIS testing charges. For others : Rs. 10,000/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(Grade)	-	250	-
3(Type/Shape of Cover)	-	250	-
4.4(Reinforcement)	-	2000	-
4.5(Steel Fibres - Diameter / equivalent diameterofsteel tibres)	-	500	-
4.5(Steel Fibres - The aspect ratio of the tibres)	-	500	-
5.2 and Table 1(Dimensions of Frame - A)	-	300	-
5.2 and Table 1(Dimensions of Frame - B)	-	300	-
5.2 and Table 1(Dimensions of Frame - C)	-	300	-
5.2 and Table 1(Dimensions of Frame - D)	-	300	-
5.2 and Table 1(Dimensions of Frame - E)	-	300	-
5.2 and Table 1(Dimensions of Frame - F)	-	300	-
5.2(Dimensions of cover- Diameter)	-	300	-
5.2(Clearance at top between the frame and the cover all round the periphery)	-	300	-
5.2(Top surface ofthe frame and cover is in level)	-	300	-
5.2 and Fig 1(Distance of housing from the edge)	-	300	-
5.2 and Fig 1(Clear cover to reinforcement)	-	300	-
5.2(Suitable taper matching with taper given for the frame shall be provided to the periphery of the cover)	-	350	-
7.4.1(Edge Protection and Finishing - Frame)	-	500	-
7.4.1(Edge Protection and Finishing - Frame)	-	350	-
7.4.1(Edge Protection and Finishing - Frame)	-	350	-
7.4.1(Edge Protection and Finishing - Frame)	-	350	-
7.4.2(Edge Protection and Finishing - Cover)	-	500	-
7.4.2(Edge Protection and Finishing - Cover)	-	350	-
7.4.2(Edge Protection and Finishing - Cover)	-	350	-
7.4.2(Edge Protection and Finishing - Cover)	-	350	-
8(LIFTING HOOKS)	-	1000	-
8(LIFTING HOOKS)	-	1000	-
9.1(General)	-	250	-
9.3 and Table and Annex C(Load Test)	-	6400	-
4.4(Reinforcement)	-	500	-

31 Dec, 2026

-
Up to dimension 760 mm only

IS 15683 (2018)

Portable Fire Extinguishers — Performance and Construction — Specification ( First Revision )

99700 View breakup
For BIS Samples – 1.5 times the BIS testing charges. Rs.23700/- (except fire performance test) Fire Performance test: Rs.9000/- for 1A Class Rs.11000/- for 2A Class Rs.12000/- for 3A Class Rs.16000/- for 4A Class Rs.27500/- for 6A Class Rs.33000/- for 10A Class Rs.46000/- for 15A Class Rs.66000/- for 20A Class Rs.3000/- for 8B Class Rs.4000/- for 13B Class Rs.5000/- for 21B Class Rs.6000/- for 34B Class Rs.32000/- for 55 B Class Rs.36000/- for 70 B Class Rs.46000/- for 89 B Class Rs.51000/- for 113 B Class Rs.60000/- for 144B Class Rs.65000/- for 183B Class Rs.75000/- for 233B Class Rs.2000/- for 5F Class Rs.6000/- for 15F Class Rs.10000/- for 25F Class Rs.20000/- for 75F Class Splash Test : Rs.1500/- for 5F Class Rs.4500/- for 15A Class Rs.7500/- for 25F Class Rs.15000/- for 75F Class Electrical conductivity test- Rs. 15,000/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 5.3.1(Filling Requirements)	-	750	-
Cl. 5.3.2(Filling Requirements)	-	750	-
Cl. 5.3.2(Filling Requirements)	-	750	-
Cl. 5.3.2(Filling Requirements)	-	750	-
Cl. 5.3.2(Filling Requirements)	-	750	-
Cl. 5.3.2(Filling Requirements)	-	750	-
Cl. 5.3.2(Filling Requirements)	-	750	-
Cl. 5.3.3(Capacities)	-	250	-
Cl. 5.3.3(Capacities)	-	250	-
Cl. 5.3.3(Capacities)	-	250	-
Cl. 5.3.3(Capacities)	-	250	-
Cl. 5.3.3(Capacities)	-	250	-
Cl. 5.3.3(Capacities)	-	250	-
Cl. 6(PRESSURE REQUIREMENTS FOR LOW PRESSURE EXTINGUISHERS)	-	1500	-
Cl. 7.1(GENERAL OPERATING PERFORMANCE REQUIREMENTS)	-	250	-
Cl. 6(PRESSURE REQUIREMENTS FOR LOW PRESSURE EXTINGUISHERS)	-	1500	-
Cl. 7.2 - Table 1(GENERAL OPERATING PERFORMANCE REQUIREMENTS)	-	500	-
Cl. 7.2 - Table 1(GENERAL OPERATING PERFORMANCE REQUIREMENTS)	-	500	-
Cl. 7.3(Resistance to Temperature changes)	-	1500	-
Cl 7.4.3( Leakage Test)	-	500	-
Cl 7.5.1(Impact Resistance Test)	-	750	-
Cl 7.5.2(Vibration Resistance Test)	-	1000	-
Cl 7.6(Resistance to Corrosion)	-	2000	-
Cl 7.7(Tapping Test)	-	750	-
Cl 7.8(Intermittent Discharge Test)	-	750	-
Cl 8.1(Rating Suitability for the Various Classes of Fire)	-	750	24700 Rs Except Fire Test Fire Performance Test: 9000 -1A 11000 - 2A 12000 - 3A 16000 -4A 27500 -6A 33000 -10A 46000 -15A 66000 -20A 3000 -8B 4000 -13B 5000 -21B 6000 -34B 32000 -55B 36000 -70B 46000 -89B 51000 113B 60000 -144B 65000 -183B 75000 -233B
Cl 8.6(Electrical Conductivity of Extinguisher Discharge)	-	15000	-
Cl 9.2.2(Burst Test)	-	750	-
Cl 9.2.3(Crushing Test)	-	700	-
Cl 9.2.4(Pressure Cycling Test)	-	1000	-
Cl 9.2.5(Welded Low Carbon Steel Cylinder)	-	500	-
Cl 9.2.6(Stainless Steel Cylinders)	-	500	-
Cl 9.3(Carrying Handle)	-	500	-
Cl 9.4(Mounting)	-	500	-
Cl 9.5(Caps, Valves and Closures)	-	750	-
Cl 9.8(Hose Assemblies)	-	1000	-
Cl 9.2.7(Aluminium Cylinders)	-	500	-
Cl 9.7.1(Requirements for Plastics Components)	-	500	-
Cl 9.7.2(Requirements for Plastics Components)	-	500	-
Cl 9.7.3(Requirements for Plastics Components)	-	500	-
Cl 9.8(Hose Assemblies)	-	1000	-
Cl 9.9 - Table 10(Method of Operation)	-	750	-
Cl 9.10(Safety-Locking Devices)	-	750	-
Cl 9.12(Dip-Tubes and Filters — Water-Based Extinguishers)	-	500	-
Cl 9.13(Horn Test for Carbon Dioxide (CO2) Extinguishers)	-	1000	-
Cl 9.14(Requirements for Extinguishants Filled in the Extinguisher)	-	2000	-
Cl 10(MARKING AND COLOUR)	-	250	-
Cl 7.8(Intermittent Discharge Test)	-	750	-
Cl 9(CONSTRUCTION REQUIREMENTS)	-	250	-
9.1(General Requirements of High Pressure Extinguisher)	-	1000	-

31 Dec, 2026

-
Class D Fire test (Cl. 8.1.4 & 8.5), High pressure extinguisher (Cl. 9.1), Requirements for Pressure gauges and indicators for low pressure extinguishers (Cl. 9.11)

IS 7098 : Part 2 (2011)

Crosslinked polyethylene insulated thermoplastic sheathed cables - Specification: Part 2 for working voltages from 3.3 kV up to and including 33 kV (Second Revision)

33 KV

175000 View breakup
for BIS Samples – 1.5 times the BIS testing charges. For others : Rs. 1,75,000/- for type test of single core cable. Rs. 2,15,000/- for type test of three core cable Rs. 8500/- for additional test for C1(FR) Rs. 13000/- for additional test for C2(FR-LSH) Rs. 1200/- for copper purity

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(CONDUCTOR)	-	30	RS 175000 for type test of single core cable Rs 215000 for type test of three core cable Rs. 9000 for additional test for C1 (FR) Rs. 13000 For Additional Test For C2 (FR-LSH) Rs. 1200 for cupper purity
4.1.1(CONDUCTOR)	-	30	-
5(INSULATION)	-	30	-
6(SCREENING)	-	30	-
6.1.1(SCREENING : - Non-metallic — Semiconducting Compound)	-	30	-
6.1.2(SCREENING : - Non-magnetic Metallic Tape for Single Core Unscreened and Unarmoured Cables)	-	30	-
7(FILLERS AND INNER SHEATH)	-	30	-
8.1(ARMOURING)	-	30	-
8.2(ARMOURING)	-	30	-
9(OUTER SHEATH )	-	30	-
10.1(CONDUCTOR)	-	30	-
10.2(CONDUCTOR)	-	30	-
11(CONDUCTOR SCREENING)	-	30	-
12.1(INSULATION)	-	30	-
12.2(INSULATION : Thickness of Insulation)	-	500	-
12.3(INSULATION : Tolerance on Thickness of Insulation)	-	500	-
12.4(Eccentricity and Ovality)	-	500	-
12.5(INSULATION : Application of Insulation)	-	30	-
13.1(INSULATION SCREENING)	-	30	-
13.2(INSULATION SCREENING)	-	30	-
13.3(INSULATION SCREENING)	-	30	-
14.1(CORE IDENTIFICATION)	-	30	-
14.1.1(CORE IDENTIFICATION)	-	30	-
15.1(LAVING UP OF CORES)	-	30	-
16.1(INNER SHEATH (COMMON COVERING))	-	500	-
16.2(INNER SHEATH (COMMON COVERING))	-	500	-
16.2.1(INNER SHEATH (COMMON COVERING))	-	500	-
16.3(INNER SHEATH (COMMON COVERING) : Thickness of Inner Sheath)	-	500	-
16.3.1(INNER SHEATH (COMMON COVERING) : Thickness of Inner Sheath)	-	500	-
17.1(ARMOURING : Application )	-	30	-
17.1.3(ARMOURING )	-	30	-
17.2(ARMOURING : Type of armour )	-	30	-
17.2.1(ARMOURING : Type of armour )	-	30	-
17.2(ARMOURING : Coverage )	-	500	-
17.3(ARMOURING : Dimension )	-	1000	-
17.4(ARMOURING : Joints)	-	30	-
16.4(ARMOURING : Resistance)	-	500	-
18.1(OUTER SHEATH)	-	30	-
18.2(OUTER SHEATH: Colour)	-	30	-
18.3(Thicknes of outer sheath : average )	-	500	-
18.3(Thicknes of outer sheath : minimum )	-	500	-
19.1 i) a)(Annealing test (for copper))	-	1000	-
19.1 i) b)(Tensile test (for aluminium) - Before stranding )	-	750	-
19.1 i) b)(Tensile test (for aluminium) - After stranding )	-	750	-
19.1 i) c)(Wrapping test ( for aluminium))	-	500	-
19.1 i) d)(Resistance test - Main conductor )	-	500	-
19.1 i) d)(Resistance test - Neutral conductor )	-	500	-
19.1 iii) a)(Phyaical tests for insulation : Tensile Test)	-	750	-
19.1 iii) a)(Phyaical tests for insulation : Elongation )	-	750	-
19.1 iii) b)(Phyaical tests for insulation - Ageing in air Oven : Tensile Variation )	-	750	-
19.1 iii) b)(Phyaical tests for insulation- Ageing in air oven : Elongation Variation )	-	750	-
19.1 iii) c)(Degree of cross linking )	-	30	-
19.1 iii) d)(Phyaical tests for insulation : Hot set )	-	1000	-
19.1 iii) d)(Phyaical tests for insulation : Permanent set )	-	1000	-
19.1 iii) e)(Phyaical tests for insulation : Shrinkage )	-	500	-
19.1 iii) e)(Phyaical tests for insulation : Shrinkage - Crack observed )	-	500	-
19.1 iii) f)(Insulation: Waterabsorption(gravimetric))	-	2000	-
19.1 v) a)(Test for strippability of semiconducting strippable insulation screen (when applicable))	-	1000	-
19.1 v) b)(Volume resistivity)	-	1000	-
19.1 vi) a)(Physical tests for outer sheath : Tensile stregth )	-	750	-
19.1 vi) a)(Physical tests for outer sheath : Elongation )	-	750	-
19.1 vi) b)(Physical tests for outer sheath- Ageing in air oven : Tensile stregth )	-	750	-
19.1 vi) b)(Physical tests for outer sheath -Ageing in air oven : Elongation )	-	750	-
19.1 vi) b)(Physical tests for outer sheath- Ageing in air oven : Tensile stregth Variation )	-	750	-
19.1 vi) b)(Physical tests for outer sheath -Ageing in air oven : Elongation Variation )	-	750	-
19.1 vi) c)(Phyaical tests for Sheath : Shrinkage )	-	500	-
19.1 vi) c)(Phyaical tests for Sheath : Shrinkage - Crack observed )	-	500	-
19.1 vi) d)(Sheath : Hot deformation)	-	750	-
19.1 vi) e)(Loss of massIn air oven)	-	2000	-
19.1 vi) f)(Sheath : Heat shock test)	-	500	-
19.1 vi) g)(Sheath : Thermalstability)	-	500	-
19.1 vi) h)(Carbon black content of polythene sheath )	-	1500	-
19.1 vii)(Thermal ageing test for complete cable - Tensile stregth )	-	750	-
19.1 vii)(Thermal ageing test for complete cable- Elogation )	-	750	-
19.1 vii)(Thermal ageing test for complete cable- Resistivity )	-	750	-
19.1 xi)(Insulation resistance test : volume resistivity )	-	1000	-
20.2(Partial discharge test)	-	25000	-
20.3(Bending test)	-	500	-
20.4(Dielectric power factor test : As a function of voltage)	-	10000	-
20.4(Dielectric power factor test : As a function of temperature)	-	10000	-
20.5(Heating Cycle Test)	-	25000	-
20.6(Impulse withstand test (Rated voltage, kV 3.8/6.6 Impulse voltage, kV 60))	-	30000	-
20.7(High voltage test)	-	30000	-
20.8(Flammability test)	-	750	-
20.1(Oxygen Index Test)	-	2500	-
20.11(Flame Retardance Test on Single Cables)	-	1500	-
20.12(Flame Retardance Test on Bunched Cables)	-	2000	-
20.13(Test for Halogen Acid Gas Evolution)	-	2000	-
20.14( Test for Smoke Density)	-	2000	-
20.15(Temperature Index)	-	2000	-
21.1(IDENTIFICATION : Manufacturer's Identification)	-	30	-
21.2(IDENTIFICATION : Cable Identification)	-	30	-
21.3(IDENTIFICATION : Cable Code)	-	30	-

31 Dec, 2026

-
Included w.e.f. 10.05.2019

IS 4989 (2018)

Foam concentrate for producing mechanical foam for fire fighting - Specification (Fourth Revision)

34500 View breakup
For BIS Samples – 1.5 times the BIS testing charges. For others Rs. 10,250/- except Fire tests For fire test :Rs. 22,000/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 4.1, Table 1, Sr. No. 1 (Visual Examination )	-	0	-
Cl. 4.1, Table 1, Sr. No. 2(Freezing and thrawing)	-	0	-
Cl. 4.1, Table 1, Sr. No. 3(pH (Original Sample))	-	0	-
Cl. 4.1, Table 1, Sr. No. 3(pH (ageing Sample))	-	0	-
Cl. 4.1, Table 1, Sr. No. 4(Miscibility with distilled water)	-	0	-
Cl. 4.1, Table 1, Sr. No. 5(Viscosity)	-	0	-
Cl. 4.1, Table 1, Sr. No. 6(pour point)	-	0	-
Cl. 4.1, Table 1, Sr. No. 7(Sludge content)	-	0	-
Cl. 4.1, Table 1, Sr. No. 8(Surface tension)	-	0	-
Cl. 4.1, Table 1, Sr. No. 10(spreading coefficient)	-	0	-
Clause No. 4.2, Sr. No. I of Table 2, Annex-J(Expansion)	-	1000.00	-
Clause No. 4.2, Sr. No. II of Table 2, Annex-J(25% Drainage Time)	-	1000.00	-
Clause No. 4.2, Sr. No. III(a) of Table 2, Annex-K(Fire Control Time for Hydrocarbon Fires (Non Polar) with potable water)	-	22000.00	With single fire test only. for other additional charges will be added as 22000.00 per fire test.
Clause No. 4.2, Sr. No. III(b) of Table 2, Annex-K(Fire Extinction Time for Hydrocarbon Fires (Non Polar) with potable water)	-	22000.00	With single fire test only. for other additional charges will be added as 22000.00 per fire test.
Clause No. 4.2, Sr. No. III(c) of Table 2, Annex-K(Sealability/Film forming for Hydrocarbon Fires (Non Polar) with potable water)	-	22000.00	With single fire test only. for other additional charges will be added as 22000.00 per fire test.
Clause No. 4.2, Sr. No. III(d) of Table 2, Annex-K(Burn Back for Hydrocarbon Fires (Non Polar) with potable water)	-	22000.00	With single fire test only. for other additional charges will be added as 22000.00 per fire test.
Clause No. 4.2, Sr. No. III(a) of Table 2, Annex-K(Fire Control Time for Hydrocarbon Fires (Non Polar) with synthetic sea water)	-	22000.00	12500 Rs. Except Fire Test single fire test : 22000.00 Rs Double fire test : 44000.00 Rs Triple fire test : 66000.00 Rs Fourth Time fire test : 88000.00 Rs
Clause No. 4.2, Sr. No. III(b) of Table 2, Annex-K(Fire Extinction Time for Hydrocarbon Fires (Non Polar) with synthetic sea water)	-	22000.00	With single fire test only. for other additional charges will be added as 22000.00 per fire test.
Clause No. 4.2, Sr. No. III(c) of Table 2, Annex-K(Sealability/Film forming for Hydrocarbon Fires (Non Polar) with synthetic sea water)	-	22000.00	With single fire test only. for other additional charges will be added as 22000.00 per fire test.
Clause No. 4.2, Sr. No. III(d) of Table 2, Annex-K(Burn Back for Hydrocarbon Fires (Non Polar) with synthetic sea water)	-	22000.00	With single fire test only. for other additional charges will be added as 22000.00 per fire test.
Clause No. 4.2, Sr. No. IV(a) of Table 2, Annex-M(Fire Control Time for Polar Solvent Fire)	-	22000.00	With single fire test only. for other additional charges will be added as 22000.00 per fire test.
Clause No. 4.2, Sr. No. IV(b) of Table 2, Annex-M(Fire Extinction Time Polar Solvent Fire)	-	22000.00	With single fire test only. for other additional charges will be added as 22000.00 per fire test.
Clause No. 4.2, Sr. No. IV(c) of Table 2, Annex-M(Sealability/Film forming for Polar Solvent Fires)	-	22000.00	With single fire test only. for other additional charges will be added as 22000.00 per fire test.
Clause No. 4.2, Sr. No. IV(d) of Table 2, Annex-M(Burn Back for Polar Solvent Fires)	-	22000.00	With single fire test only. for other additional charges will be added as 22000.00 per fire test.
Clause No. 4.2, Sr. No. IV(a) of Table 2, Annex-M(Fire Control Time for Polar Solvent Fire with synthetic sea water)	-	22000.00	With single fire test only. for other additional charges will be added as 22000.00 per fire test.
Clause No. 4.2, Sr. No. IV(b) of Table 2, Annex-M(Fire Extinction Time Polar Solvent Fire with synthetic sea water)	-	22000.00	With single fire test only. for other additional charges will be added as 22000.00 per fire test.
Clause No. 4.2, Sr. No. IV(c) of Table 2, Annex-M(Sealability/Film forming for Polar Solvent Fires with synthetic sea water)	-	22000.00	With single fire test only. for other additional charges will be added as 22000.00 per fire test.
Clause No. 4.2, Sr. No. IV(d) of Table 2, Annex-M(Burn Back for Polar Solvent Fires with synthetic sea water)	-	22000.00	With single fire test only. for other additional charges will be added as 22000.00 per fire test.
Clause No. 4.2, Sr. No. IV of Table 1, Annex-C(Specific Gravity of original sample)	-	500	-
Clause No. 4.2, Sr. No. IV of Table 1, Annex-C(Specific Gravity of aged sample)	-	500	-
Clause No. 4.2, Sr. No. I of Table 1, Annex-A-1(Visual Examination)	-	500	-
Clause No. 4.2, Sr. No. II of Table 1, Annex-A-2(Freezing and thawing)	-	500	-
Clause No. 4.2, Sr. No. III of Table 1, Annex-B(pH of original sample)	-	500	-
Clause No. 4.2, Sr. No. III of Table 1, Annex-B(pH of aged sample)	-	500	-
Clause No. 4.2, Sr. No. V of Table 1, Annex-D(Misciblity with distilled water)	-	1000	-
Clause No. 4.2, Sr. No. VI of Table 1, using viscosity meter see sl No. (iv) of table 2 of IS 1206 (Part 3)(Viscosity (Kinematic))	-	1200	-
Clause No. 4.2, Sr. No. VII of Table 1, Annex-E(Pour Point)	-	1000	-
Clause No. 4.2, Sr. No. VIII of Table 1, Annex-F(Sludge Content for Original Sample)	-	1000	-
Clause No. 4.2, Sr. No. IX of Table 1, Annex-G(Surface Tension)	-	1500	-
Clause No. 4.2, Sr. No. X of Table 1, Annex-G(Spreading Coefficient)	-	1800	-
Clause No. 4.2, Sr. No. VIII of Table 1, Annex-F(Sludge Content for Aged Sample)	-	1000	-

31 Dec, 2026

-
Included w.e.f. 10.05.2019

IS 15111 : Part 2 (2002)

Self ballasted lamps for general lighting services: Part 2 performance requirements

350vac

60000 View breakup
For BIS Samples – 1.5 times the BIS testing charges. For others : Rs. 60,000/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(DIMENSIONS)	-	1000	ok
8.1(STARTING AND RUN-UP)	-	750	ok
8.2(STARTING AND RUN-UP)	-	750	ok
9(Lamp Wattage)	-	3000	ok
10(Luminous Flux)	-	4000	ok
11(Colour)	-	3000	ok
12(LUMEN MAINTENANCE)	-	3500	ok
13.1(Life)	-	13000	ok
13.2(Life)	-	12500	ok
14(Harmonics)	-	2500	ok
15(Lamp Efficacy)	-	500	ok
16(Power factor)	-	500	ok
18.1(Marking)	-	1000	ok
18.1(Marking)	-	1000	ok
18.1(Marking)	-	1000	ok
18.1(Marking)	-	1000	ok
18.1(Marking)	-	1000	ok
18.1(Marking)	-	1000	ok
18.1(Marking)	-	1000	ok
18.1(Marking)	-	1000	ok
18.1(Marking)	-	1000	ok
18.1(Marking)	-	1000	ok
18.1(Marking)	-	1000	ok
18.1(Marking)	-	1000	ok
18.1(Marking)	-	1000	ok
18.1(Marking)	-	1000	ok
18.2(BIS Cirtification Marking)	-	1000	ok

31 Dec, 2026

-
Included w.e.f. 10.05.2019

IS 5484 (1997)

Ec grade aluminium rod produced by continuous casting and rolling - Specification (Second Revision)

10000 View breakup
For BIS Samples – 1.5 times the BIS testing charges. For others : Rs. 10,000/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1 -Table-1, i(Aluminium- IS:504)	-	200	For BIS Sample 1.5 times of bis
5.1 -Table-1, ii(Silicon - IS:504)	-	500	For BIS Sample 1.5 times of bis
5.1 -Table-1, iii(Iron - IS:504)	-	400	For BIS Sample 1.5 times of bis
5.1 -Table-1, iv(Copper - IS:504)	-	500	For BIS Sample 1.5 times of bis
5.1 -Table-1, v(Titanium+ Vanadium - IS:504)	-	1000	For BIS Sample 1.5 times of bis
5.1 -Table-1, vi(Manganese - IS:504)	-	400	For BIS Sample 1.5 times of bis
5.1 -Table-1, vi(Zirconium - IS:504)	-	500	For BIS Sample 1.5 times of bis
5.1 -Table-1, vi(Chromium - IS:504)	-	500	For BIS Sample 1.5 times of bis
10.1(Diameter - IS:5484)	-	1500	For BIS Sample 1.5 times of bis
8-Table-1(Tensile Strength - IS:1608)	-	1500	For BIS Sample 1.5 times of bis
9(Resistyvity at 20 degree C -IS:398(P-2))	-	1500	For BIS Sample 1.5 times of bis
11.1(Joint- IS:5484)	-	250	For BIS Sample 1.5 times of bis
12.1(Freedom from defects- IS:5484)	-	500	For BIS Sample 1.5 times of bis
12.2(Finish - IS:5484)	-	250	For BIS Sample 1.5 times of bis
5.1 -Table-1, i(Aluminium- IS:504)	-	200	For BIS Sample 1.5 times of bis
5.1 -Table-1, ii(Silicon - IS:504)	-	500	For BIS Sample 1.5 times of bis
5.1 -Table-1, iii(Iron - IS:504)	-	400	For BIS Sample 1.5 times of bis
5.1 -Table-1, iv(Copper - IS:504)	-	500	For BIS Sample 1.5 times of bis
5.1 -Table-1, v(Titanium+ Vanadium - IS:504)	-	1000	For BIS Sample 1.5 times of bis
5.1 -Table-1, vi(Manganese - IS:504)	-	400	For BIS Sample 1.5 times of bis
5.1 -Table-1, vi(Zirconium - IS:504)	-	500	For BIS Sample 1.5 times of bis
5.1 -Table-1, vi(Chromium - IS:504)	-	500	For BIS Sample 1.5 times of bis
10.1(Diameter - IS:5484)	-	1500	For BIS Sample 1.5 times of bis
8-Table-1(Tensile Strength - IS:1608)	-	1500	For BIS Sample 1.5 times of bis
9(Resistyvity at 20 degree C -IS:398(P-2))	-	1500	For BIS Sample 1.5 times of bis
11.1(Joint- IS:5484)	-	250	For BIS Sample 1.5 times of bis
12.1(Freedom from defects- IS:5484)	-	500	For BIS Sample 1.5 times of bis

31 Dec, 2026

-
Included w.e.f. 10.05.2019

IS 4308 (2019)

Dry Chemical Powders for Fire Fighting — BC, ABC and D Types — Specification ( Third Revision )

44240.00 View breakup
Rs. 11,900/- except Fire tests For fire test : Rs. 11,000/- for 2A class Rs. 32,000/- for 55B class

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 5 Table 1(xi)(Temperature resistance test)	-	1500	-
Clause 5 Table 1(iii)(Apparent density (Declared value by the manufacturer))	-	740	-
Clause 5 Table 1(iv)(Particle size / sieve analysis (Declared value by the manufacturer))	-	1000	-
Clause 5 Table 1(vi)(Water repellency)	-	750	-
Clause 5 Table 1(vii)(Moisture content)	-	1000	-
Clause 5 Table 1(viii)(Rate of flow)	-	800	-
Clause 5 Table 1(ix)(Foam compatibility (required if declared by the manufacturer))	-	2700	-
Clause 5 Table 1(x)(Fire test)	-	32000	Rs. 17700/- (Except fire test) Rs. 11000/- for 2A Class Rs. 32000/- for 55B Class (Fire Test)
Clause 5 Table 1(xi)(Temperature resistance test)	-	0	-
Clause 5 Table 1(xii)(colour)	-	250	-
Clause 5 Table 1(i)(Main Chemical constituent-Sodium/Potassium bicarbonate )	-	1500	-
Clause 5 Table 1(v)(Hygroscopicity)	-	2000	-

31 Dec, 2026

-
Included w.e.f. 10.05.2019

IS 14255 (1995)

Aertal bunched cables - For working voltages up to and including 1100 Volts - Specification

1.1 KV

15000 View breakup
For BIS Samples – 1.5 times the BIS testing charges. For others : Rs. 12,000/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Phase/Street Lighting conductor)	-	50	RS 15000/-
4.2(Messenger (Neutral Conductor or Otherwise))	-	50	-
5.1(Insulation)	-	50	-
6.1(Flexibility class)	-	20	-
6.2(Compactness)	-	30	-
6.2(No of strands)	-	50	-
6.2(Surface)	-	50	-
6.3(Protective barrier)	-	50	-
6.4(size of street lighting conductor)	-	30	-
6.5(Size of messenger conductor )	-	30	-
6.6(Joints in messenger conductor )	-	30	-
6.6(Direction of outer layer)	-	50	-
7.1(Insulation)	-	50	-
7.2( Thickness of insulation)	-	500	-
7.3(Tolerance on thickness of insulation )	-	50	-
7.4(Aplication of the insulation )	-	50	-
7.5(Colour of the insulation )	-	50	-
8.1(Core identification)	-	50	-
8.2(Core identification)	-	50	-
8.3(Identification by other means)	-	30	-
9.1(Assembly (Laying up))	-	50	-
9.2(Assembly (Laying up))	-	20	-
9.3(Direction of lay)	-	30	-
10.1 a) i)(Tests on phase/street light conductor: tensile test - Test method IS10810:Part 2)	-	500	-
10.1 a) ii)(Wrapping test - 10810: Part 3)	-	500	-
10.1 a) iii)(Resistance test - IS10810: Part 5)	-	200	-
10.1 b) i)(Test on messenger conductor: Breaking load - IS 10810: Part 2)	-	800	-
10.1 b) ii)(Test on messenger conductor: Elongation test - Cl 11.3)	-	500	-
10.1 b) iii)(Test on messenger conductor: Resistance test - IS 10810: Part 5)	-	100	-
10.1 c) i)(Physical tests for XLPE Insulation: Tensile strength - IS 10810: Part 7)	-	250	-
10.1 c) i)(Physical tests for XLPE Insulation: elongation at break - IS 10810: part 7)	-	250	-
10.1 c) ii)(Ageing in air oven : Tensile strength variation - IS 10810:Part 11)	-	1000	-
10.1 c) ii)(Ageing in air oven : Elongation variation- IS 10810: Part 11)	-	500	-
10.1 c) iii)(Hot set test: Elongation under load - IS 10810: Part 30)	-	800	-
10.1 c) iii)(Hot set test: Permanent elongation (set) after cooling - IS 10810: Part 30)	-	1000	-
10.1 c) iv)(Shrinkage test : Shrinkage - 10810:Part 12)	-	500	-
10.1 c) iv)(Shrinkage test : Crack Observed - 10810:Part 12)	-	250	-
10.1 c) v)(Water ahsorption (Gravimetric) - IS 10810: Part 33 )	-	1000	-
10.1 d) i)(Physical test for PE insulation: Tensile strength - IS 10810: Part 7 )	-	700	-
10.1 d) i)(Physical test for PE insulation: elongation at break - IS 10810: Part 7)	-	500	-
10.1 d) ii)(Melt flow index- IS 10810: Part 23)	-	1000	-
10.1 d) iv)(Vicat softening point -IS 10810: Part 22)	-	800	-
10.1 d) v)(Environmental stress cracking -IS 10810:Part29)	-	500	-
10.1 f)(Insulation resistance (Volume resistivity) test a) volume resistivity at 27°C - IS 10810: Part 43)	-	500	-
10.1 f)(Insulation resistance (Volume resistivity) test b) volume resistivity at 70°C - IS 10810: Part 43)	-	500	-
10.1 g)(High voltage test - IS10810:Part 45)	-	1000	-
11.4(Bending Test on the Completed Cable ( Optional) )	-	300	-

31 Dec, 2026

-
Included w.e.f. 10.05.2019

IS 15636 (2012)

Automotive vehicles - Pneumatic tyres for commercial vehicles - Diagonal and radial ply - Specification (First Revision)

92800 View breakup
For BIS Samples – 1.5 times the BIS testing charges. Rs.92800/- for speed up to `M`(130km/hr)(47 hrs Endurance) Rs.72600/- for speed `M`(with L.I.121 Or less, `N`&`P`(34 hrs Endurance Rs.71000/- for speed `Q`(160km/hr) & above,(1hr Load/speed)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5, 8(Marking)	-	500	-
3.1.1(Type of pnuamitic tyre)	-	500	-
3.17(Tyre-Size Designation)	-	500	-
3.26(Load Index)	-	1000	-
3.28(Speed symbol)	-	500	-
3.29(Table load-Capacity variation with speed)	-	2000	-
4(Test Requirements)	-	1000	-
4.1(Tyre Dimensions)	-	67000	-
4.1.1(Section width of tyre)	-	67000	-
4.1.1.2(Tyre outer diameter)	-	3000	-
4.1.3(Section width of tyre)	-	67000	-
4.1.3(Outer diameter of tyre)	-	3000	-
4.2(Endurance test)	-	47000	-
4.3.1(Load/Speed performance test)	-	44000	-
4,4,1(Tread -wear indicators)	-	4000	-
4.4,2(Tread -wear indicators)	-	4000	-
4.4.4(Tread -wear indicators)	-	4000	-
4.5(Tyre strength test (Plunger rest))	-	20000	-

31 Dec, 2026

-
-

IS 10322 : PART 5 : SEC 3 (2012)

Luminaires: Part 5 particular requirements: Sec 3 luminaires for road and street lighting (First Revision)

1000VAC

70000 View breakup
For BIS Samples – 1.5 times the BIS testing charges. For others : Rs.70000/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(General Test Requireements)	-	375	Rs 70000/- UPTO 1000V except Gonio Photometer , where our limit of testing will be 350 Volt only.
5(Classification of Luminaires')	-	375	-
7.0(Construction)	-	16000	-
8.0(Creepage Distance and Clearances)	-	2000	-
9.0(Provision for earthing)	-	1000	-
10.0(Terminals)	-	3000	-
11.0(External & Internal Wiring)	-	3000	-
12.0(Protection against electric shock)	-	750	-
13.0(Endurance Tests and Thermal Tests)	-	6000	-
14.0(Resistance to Dust & Moisture)	-	4000	-
15.0(Insulation Resistance and Electric Strength)	-	4000	-
16.0(Resistance to Heat , fire and tracking)	-	3500	-
17.0(Photometric Test)	-	25000	-
6.0(Marking)	-	1000	-

31 Dec, 2026

-
Included w.e.f. 11.09.2018 Up to 350 V ac only

IS 15633 (2005)

Automotive vehicles - Pneumatic tyres for passenger car vehicles - Diagonal and radial ply - Specification

86200 View breakup
For BIS Samples – 1.5 times the BIS testing charges. Rs.81200/- for Tube type Rs.86200/- for Tubeless

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4/4.1.1.1- Refer Annex B Col 2 and Annex D(test method )(Tyre dimensions/Section width)	-	1500	-
4/4.1.1.2- Refer Annex B Col 2 and Annex D(test method )(Tyre outer diameter)	-	1500	-
4.2.4(Outer diameter of the .tyre after the 6 hrs of the Load/Speed Performance Test shall not differ from the outer diameter measured before the test by more than + 3.5 percent.)	-	1500	-
4.3/4.3.1/4.3.2 Refer Annex E and Table 14( Endurance Test)	-	44200	-
4.4/4.4.1/4.4.2 Refer Annex F and Table 15 and 16(Bead Unseating Resistance Test for Tubeless Tyre )	-	5000	-
4.5/4.5.1(Tread-Wear -Indicators)	-	3500	-
4.5.1(Tread-Wear -Indicators)	-	3500	-
4.5.2(Each tread-wear indicator shall individually provide a means of indicating with a tolerance of +0.60 ,−0.00 mm when the tread grooves are no longer more than 1.6 mm deep.’)	-	500	-
4.6. Refer Annex G ,Table 17 and 18(Tyre.Strength Test)	-	12000	-
4/4.2.1 /4.2.2/4.2.3,Refer Annex D ,Table 13(Load/Speed Performance Test)	-	18000	-
4.4.3( In the case of the tyre of which the load capability index is not marked, it shall be classified according to the mzximum load capability corresponding to load capability index.)	-	500	-
4.5. Refer Annex C(Tread wear indicator measurement )	-	3500	-

31 Dec, 2026

-
-

IS 7098 : Part 1 (1988)

Specification for crosslinked polyethylene insulated pvc sheathed cables: Part 1 for working voltages up to and including 1100 volts (First Revision)

1.1KV

26000 View breakup
For BIS Samples – 1.5 times the BIS testing charges. For others : Single core - Rs. 6500/- Additional core(each) –Rs. 30% extra FR- Rs. 10000/- For FR-LSH- Rs. 14000/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(CONDUCTOR: MATERIALS)	-	50	For Type Test single core Except FR & FRLSH = 10000 Rs each additional cores Rs.1500 extra armoured cable= 1000 Rs for FR-Rs.10000 , for FRLSH Rs.16000
4(INSULATION : MATERIALS)	-	50	-
5.1(FILLER AND INNER SHEATH)	-	50	-
5.2(FILLER AND INNER SHEATH)	-	50	-
6(ARMOURING)	-	50	-
7(OUTER SHEATH)	-	50	-
8.1(CONDUCTOR: CONSTRUCTION)	-	50	-
8.2(PROTECTIVE BARRIER)	-	50	-
8.3(SIZE OF NEUTRAL CONDUCTOR)	-	50	-
9.1(Insulation Applied by extrusicn)	-	50	-
9.2(Thickness of Insulation - Average)	-	150	-
9.3(Thickness of Insulation - Minimum)	-	150	-
9.4(Application of Insulation)	-	50	-
10.1(Core Identification)	-	50	-
10.2(Core Identification- Neutral)	-	50	-
10.3(Core Identification by number )	-	50	-
10.4(Core Identification by number - Neutral )	-	50	-
11(LAVING UP OF CORES)	-	50	-
12.1 & 12.2(Inner sheath : Application)	-	50	-
12.3(Thickness of Inner Sheath)	-	150	-
13.1(Armouring: Application)	-	50	-
13.1.2(Armouring: Coverage )	-	200	-
13.1.3(Armouring: Direction of Lay )	-	50	-
13.2(Type of armour )	-	50	-
13.3(Armouring : Dimensions -Wire Diameter)	-	200	-
13.3(Armouring : Dimensions -Formed wire )	-	200	-
13.4(Armour: Joint)	-	50	-
13.5(Armouring : Resistance Test)	-	200	-
13.6 a)(ARMOURING: Tensile Strength)	-	500	-
13.6 b)(ARMOURING: Elongation )	-	200	-
13.6 c)(ARMOURING: Torsion Test (For round wire ) )	-	200	-
13.6 d)(ARMOURING: Winding Test(For formed wire))	-	200	-
13.6 e)(ARMOURING: Uniformity of zinc coating)	-	500	-
13.6 f)(ARMOURING: Mass of zinc coating )	-	100	-
13.6 g)(ARMOURING: Resistivity)	-	500	-
14.1(Outer Sheath : Application)	-	50	-
14.2(Colour of outer sheath)	-	50	-
14.3(Thickness of outer sheath - AVERAGE)	-	150	-
14.3(Thickness of outer sheath - minimum)	-	150	-
15.1 a) i)(Annealing Test ( For copper wire ) )	-	300	-
15.1 a) ii)(Tensile test (for aluminium) - Before stranding )	-	500	-
15.1 a) ii)(Tensile test (for aluminium) - After stranding )	-	100	-
15.1 a) iii)(Wrapping test (for aluminium))	-	100	-
15.1 a) iv)(Resistance test - Main conductor)	-	1500	-
15.1 a) iv)(Resistance test - Neutral conductor)	-	500	-
15.1 d) i) (Phyaical tests for insulation : Tensile Test)	-	500	-
15.1 d) i) (Phyaical tests for insulation : Elongation)	-	300	-
15.1 d) ii) (Phyaical tests for insulation - Ageing in air Oven : Tensile Variation )	-	600	-
15.1 d) ii) (Phyaical tests for insulation- Ageing in air oven : Elongation Variation )	-	600	-
15.1 d) iii) (Phyaical tests for insulation : Hot set )	-	150	single core 6500 each additional core 30 % extra For FR 10000 FR-LSH 14000
15.1 d) iii) (Phyaical tests for insulation : Permanent set )	-	150	-
15.1 d) iv) (Phyaical tests for insulation : Shrinkage )	-	300	-
15.1 e) iv) (Phyaical tests for Sheath : Shrinkage - Crack observed )	-	300	-
15.1 d) v) (Insulation: Waterabsorption(gravimetric))	-	800	-
15.1 e) i) (Physical tests for outer sheath : Tensile stregth)	-	250	-
15.1 e) i) (Physical tests for outer sheath : Elongation)	-	250	-
15.1 e) ii) (Physical tests for outer sheath- Ageing in air oven : Tensile stregth Variation )	-	700	-
15.1 e) ii) (Physical tests for outer sheath -Ageing in air oven : Elongation Variation )	-	500	-
15.1 e) iii) (Sheath: Loss of mass in air oven)	-	500	-
15.1 e) iv) (Phyaical tests for Sheath : Shrinkage )	-	200	-
15.1 e) v) (Sheath : Hot deformation)	-	200	-
15.1 e) vi) (Sheath : Heat shock test)	-	200	-
15.1 e) vii) (Sheath : Thermalstability)	-	200	-
15.1 f)(INSULATION RESISTANCE TEST : Volume resistivity )	-	500	-
16.2(HIGH VOLTAGE TEST )	-	500	-
16.3(FLAMMABILITY TEST : Period of Burning )	-	100	-
16.3(FLAMMABILITY TEST : Unaffected length )	-	100	-
16.9(Oxygen Index Test)	-	2000	-
16.1(Flame Retardance Test on Single Cables)	-	1000	-
16.11(Flame Retardance Test on Bunched Cables)	-	5000	-
16.13(Test for Halogen Acid Gas Evolution)	-	2000	-
16.14(Temperature Index)	-	2000	-
17.1(Manufacturer'. identification)	-	50	-
17.2(cable Indentification )	-	50	-
17.3(cable Code )	-	50	-
15.4 (a)(Cold bend)	-	500	-
15.4 (b)(Cold impact)	-	500	-
Cl No. 16.15(Smoke density test)	-	1000	-

31 Dec, 2026

-
Included w.e.f. 10.05.2019

IS 398 : Part 1 (1996)

Aluminium conductors for overhead transmission purposes - Specification: Part 1 aluminium stranded conductors (Third Revision)

5625 View breakup
For BIS Samples – 1.5 times the BIS testing charges. For others : Rs. 10,000/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
12.2, Table-1(Measurement of diameter of individual aluminium wire)	-	1000	-
12.3, Table-1(Breaking load before stranding)	-	1000	-
12.3, Table-1(Breaking load after stranding)	-	1000	-
12.4(Wrapping test)	-	500	-
12.5, Table 1(Resistance test)	-	1000	-
12.6, Table 3(Measurement of lay ratio)	-	625	-
9.3(Stranding)	-	100	-
6(Freedom from defects)	-	100	-
7.2.1(Sizes)	-	100	-
8, 8.1, 8.2(Joint in wires, except during stranding)	-	100	-
9.4(Multiple layer of wires)	-	100	-

31 Dec, 2026

-
Included w.e.f. 10.05.2019

IS 398 : Part 4 (1994)

Aluminium conductors for overhead transmission purposes: Part 4 aluminium alloy stranded conductors (Aluminium - Magnesium - Silicon Type) - Specification (Third Revision)

10000 View breakup
For BIS Samples – 1.5 times the BIS testing charges. For others : Rs. 10,000/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1(Freedom from Defects)	-	500	-
7.1 Table-1(Dimensional measurement of wires)	-	1500	-
7.2.2 Table-2, Table-4(Calculated resistance of Stranded Conductor)	-	500	-
8.1(Joints in wires-Conductors Containing Seven Wires)	-	500	-
8.2(Joints in wires-Conductors Containing More Than Seven Wires)	-	500	-
9.1(Stranding)	-	500	-
9.2 Table 3(Lay Ratio of stranded conductors)	-	500	-
9.3(Direction of Lay)	-	500	-
9.4(Multiple layers of wires)	-	500	-
11(Packing and Marking)	-	500	-
12.2 Table 1(Breaking Load Test- Before Stranding)	-	500	-
12.2 Table 1(Breaking Load Test- After Stranding)	-	500	-
12.3 Table 1(Elongation Test- Before Stranding)	-	500	-
12.3 Table 1(Elongation Test- After Stranding)	-	500	-
12.4 Table 1(Resistance of Aluminium wire)	-	2000	-

31 Dec, 2026

-
Included w.e.f. 10.05.2019

IS 398 : Part 2 (1996)

Aluminium conductors for overhead transmission purposes - Specification: Part 2 aluminium conuuctors, galvanized steel - Reinforced (Third Revision)

20875 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.1.1 & 13.2 Table-1 (mech)(Diameter of Aluminium Wires Before Stranding)	-	350	-
8.1.1 & 13.2 Table 2 (mech)(Diameter of Steel Wires Before Stranding)	-	350	-
8.1.1 & 13.2 Table-1 (mech)(Diameter of Aluminium Wires After Stranding)	-	350	-
8.1.1 & 13.2 Table 2 (mech)(Diameter of Steel Wires After Stranding)	-	350	-
10 (elec)(Stranding)	-	225	-
10 (elec)(Stranding)	-	225	-
10 (mech)(Stranding)	-	225	-
13.3 Table 1 (mech)(Breaking Load of Aluminium Wires Before Stranding)	-	400	-
13.3 Table 2 (mech)(Breaking Load of Steel Wires Before Stranding)	-	400	-
13.3 Table 1 (mech)(Breaking Load of Aluminium Wires After Stranding)	-	400	-
13.3 Table 2 (mech)(Breaking Load of Steel Wires After Stranding)	-	400	-
13.4.1 (mech)(Ductility by Torsion Test before stranding)	-	400	-
13.4.1 (mech)(Ductility by Torsion Test before stranding)	-	400	-
13.4.1 (mech)(Ductility by Torsion Test after stranding)	-	400	-
13.4.1 (mech)(Ductility by Torsion Test after stranding)	-	400	-
13.4.2 (elec)(Ductility by Elongation Test before stranding)	-	500	-
13.4.2 (elec)(Ductility by Elongation Test after stranding)	-	500	-
13.5.1 (mech)(Wrapping Test Aluminium Wires Before Stranding)	-	325	-
13.5.1 (mech)(Wrapping Test Aluminium Wires After Stranding)	-	325	-
13.5.2 (mech)(Wrapping Test Galvanized Steel Wires Before Stranding)	-	500	-
13.6 (elec)(Resistance test-Aluminium wire before Stranding)	-	800	-
13.6 (elec)(Resistance test-Aluminium wire after stranding)	-	800	-
13.7.2 (chem)(Mass of Zinc coating)	-	600	-
13.7.2 (chem)(Uniformity of Zinc coating)	-	600	-
13.8 Table-4 (mech)(Lay Ratio- Aluminium Wire Outermost Layer)	-	250	-
13.8 Table-4 (mech)(Lay Ratio- Aluminium Wire Layer Immediately Beneath Outermost Layer)	-	100	-
13.8 Table-4 (mech)(Lay Ratio- Aluminium Wire Innermost Layer of Conductors with 3 Aluminium Wire Layers)	-	100	-
13.8 Table-4 (mech)(Lay Ratio- Steel Core (6 Wire Layer))	-	100	-
13.9 (elec)(Surface condition test)	-	2500	-
13.10 (elec)(Ultimate breaking load)	-	2500	-
13.11 (elec)(Stress-strain test)	-	5000	Rs 10000 except surface condition ,ultimate breaking load & stress strain test
10 (elec)(Stranding)	-	100	-

31 Dec, 2026

-
Included w.e.f. 10.05.2019

IS/IEC 60730 : Part 2 : Sec 9 (2011)

Automatic Electrical Controls for Household and Similar Use Part 2 Particular Requirements Section 9 Temperature Sensing Controls

225000 View breakup
Rs.2,25,000/- for complete EMI/EMC test only

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
23(As per cl 23.1 to 23.1.2)	-	80000		EMC requirements – emission
26(as per annexure H)	-	140000		EMC requirements – immunity

31 Dec, 2026

-
Excluding : i) Cl 23- EMI/EMC requirements-Emission. ii) Cl 26 – EMI/ EMC requirements- Immunity.

IS 1554 : Part 1 (1988)

Specification for pvc insulated (Heavy Duty) electric cables: Part 1 for working voltages up to and including 1100 v (Third Revision)

1.1 KV

26000 View breakup
For BIS Samples – 1.5 times the BIS testing charges. For others : Single core unarmored cable- Rs. 6500/- Additional core(each) –Rs. 1500/- Extra armored cable – Rs.1000 for FR- Rs. 10000/- For FR-LSH- Rs. 14000/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(MATERIALS : CONDUCTOR)	-	30	For Type Test single core Except FR & FRLSH = 10000 Rs each additional cores Rs.1500 extra armoured cable= 1000 Rs for FR-Rs.10000 , for FRLSH Rs.16000
4.1.1(INSULATION : General Purjose Insulaiion)	-	30	-
4.1.2(INSULATION : Heat Resisting Insulation)	-	30	-
5.1(MATERIALS : FILLER AND INNER SHEATH)	-	30	-
5.2(MATERIALS : FILLER AND INNER SHEATH)	-	30	-
6.1(MATERIALS : ARMGURING)	-	30	-
6.2(MATERIALS : ARMGURING)	-	30	-
7.1.1(OUTER SHEATH : For Cables with General Purpose InsuIafion)	-	30	-
7.1.2(OUTER SHEATH : For Cables with Heat Resisting InsuIalion)	-	30	-
8.1(CONSTRUCTION : CONDUCTOR)	-	30	-
8.2(CONSTRUCTION : CONDUCTOR)	-	50	-
9.1(INSULATION )	-	50	-
9.2(INSULATION : Thickness of Insulation)	-	500	-
9.3(INSULATION :Tolerance on Thickness of Insulation)	-	500	-
9.4(INSULATION : Application of Insulation)	-	50	-
10.1(CORE IDENTIFICATION)	-	50	-
10.2(CORE IDENTIFICATION)	-	50	-
10.3(CORE IDENTIFICATION)	-	50	-
10.3.1(Arrangement of Marking)	-	50	-
11.1(LAYING UP OF CORES)	-	50	-
11.2(LAYING UP OF CORES)	-	50	-
12.1(INNER SHEATH)	-	50	-
12.2(INNER SHEATH)	-	50	-
12.3(INNER SHEATH :Thickness of Inner Sheath)	-	500	-
12.3.1(INNER SHEATH :Thickness of Inner Sheath)	-	500	-
13.1.1(ARMOURING : Application)	-	50	-
13.1.2(Armouring: Coverage )	-	500	-
13.1.3(ARMOURING : Direction of lay )	-	50	-
13.1.4(ARMOURING : Application)	-	50	-
13.2(ARMOURING : Type of Armour)	-	50	-
13.3(Armouring : Dimensions -Wire Diameter)	-	200	-
13.3(Armouring : Dimensions -Formed wire )	-	200	-
13.4(ARMOURING : Joints)	-	50	-
13.5.1(ARMOURING : Resistance)	-	30	-
13.5.2(ARMOURING : Resistance)	-	30	-
13.6 a)(ARMOURING: Tensile Strength)	-	500	-
13.6 b)(ARMOURING: Elongation )	-	200	-
13.6 c)(ARMOURING: Torsion Test (For round wire ) )	-	200	-
13.6 d)(ARMOURING: Winding Test(For formed wire))	-	200	-
13.6 e)(ARMOURING: Uniformity of zinc coating)	-	500	-
13.6 f)(ARMOURING: Mass of zinc coating )	-	200	-
13.6 g)(ARMOURING: Resistivity)	-	500	-
14.1(OUTER SHEATH)	-	30	-
14.2(OUTER SHEATH)	-	30	-
14.3(OUTER SHEATH : Colour )	-	30	-
14.4.1(Thickness of Outer Sheath : Unarmowed Cables)	-	30	-
14.4.2(Thickness of Outer Sheath : Armoured Cables)	-	300	-
15.1 a) 1)(Tests on conductor : Annealing test ( for copper ))	-	100	-
15.1 a) 2)(Tensile test (for aluminium) - Before stranding )	-	500	-
15.1 a) 2)(Tensile test (for aluminium) - After stranding )	-	100	-
15.1 a) 3)(Tests on conductor : Wrapping test ( for aluminium ))	-	200	-
15.1 a) 4)(Tests on conductor : Conductor resistance test)	-	1500	-
15.1 a) 4)(Resistance test - Neutral conductor )	-	500	-
15.1 d)1)(Phyaical tests for insulation : Tensile Test)	-	500	-
15.1 d)1)(Phyaical tests for insulation : Elongation )	-	200	-
15.1 d)1)(Physical tests for sheath : Tensile stregth )	-	500	-
15.1 d)1)(Physical tests for sheath : Elongation )	-	200	-
15.1 d)2)(Phyaical tests for insulation- Ageing in air Oven : Tensile Test)	-	500	-
15.1 d)2)(Phyaical tests for insulation - Ageing in air oven : Elongation )	-	300	-
15.1 d)2)(Phyaical tests for insulation - Ageing in air Oven : Tensile Variation )	-	300	-
15.1 d)2)(Phyaical tests for insulation- Ageing in air oven : Elongation Variation )	-	300	-
15.1 d)2)(Physical tests for outer sheath- Ageing in air oven : Tensile stregth )	-	500	-
15.1 d)2)(Physical tests for outer sheath -Ageing in air oven : Elongation )	-	300	-
15.1 d)2)(Physical tests for outer sheath -Ageing in air oven : Elongation Variation )	-	300	-
15.1 d)3)(Phyaical tests for insulation : Shrinkage )	-	200	-
15.1 d)3)(Phyaical tests for insulation : Shrinkage - Crack observed )	-	200	-
15.1 d)3)(Phyaical tests for Sheath : Shrinkage )	-	200	-
15.1 d)3)(Phyaical tests for Sheath : Shrinkage - Crack observed )	-	200	-
15.1 d)4)(Hot deformation : Insulation )	-	200	-
15.1 d)4)(Hot deformation : Sheath )	-	200	-
15.1 d)5)( Loss of mass in air oven- Insulation )	-	300	-
15.1 d)5)( Loss of mass in air oven- sheath )	-	800	-
15.1 d)6)(Heat shock test- Insulation )	-	200	-
15.1 d)6)(Heat shock test- sheath )	-	500	-
15.1 d)7)(Thermal stability- insulation )	-	100	-
15.1 d)7)(Thermal stability- Sheath )	-	500	-
15.1 e)(Insulation resistance test : Volume Resistivity )	-	200	-
15.1 e)(Insulation resistance test : IR Constant )	-	1000	-
15.1 f)(High voltage test ( water immersion test ))	-	400	-
15.1 g)(High voltage test at room temperature)	-	500	-
16.3.2(High Voltage Test ( Water Immersion Test ) : d.c. Test)	-	500	-
16.4(Flammability Test)	-	100	-
16.5(Oxygen Index Test)	-	2000	-
16.6(Flame Retardance Test on Single Cables)	-	1000	-
16.7(Flame Retardance Test on Bunched Cables)	-	5000	-
16.9(Test for Halogen Acid Gas Evolution)	-	2000	-
16.1(Temperature Index)	-	2000	-
17.1(IDENTIFICATION : Manufacturer’s Identification)	-	30	-
17.2(IDENTIFICATION : Cable Identification)	-	30	-
17.2.1(IDENTIFICATION : Cable Identification)	-	30	-
17.3(IDENTIFICATION : Cable Code)	-	30	-
15.4 a)(Cold bend test- Insulation ( Optional test))	-	200	-
15.4 a)(Cold bend test- Sheath ( Optional test))	-	200	-
15.4 b)(Cold impact test- Insulation ( Optional test))	-	200	-
15.4 b)(Cold impact test- Sheath ( Optional test))	-	200	-
15.4 c)(Armour resistance test ( for other than mining cables ).- Optional test )	-	200	-
16.1(DETAILS OF TESTS : General)	-	30	-
16.2(DETAILS OF TESTS : High Voltage Test at Room Temperature)	-	400	-
16.3.1(High Voltage Test ( Water Immersion Test ) : a.c. Test)	-	500	-
13.2.1(ARMOURING : Type of Armour)	-	30	-

31 Dec, 2026

-
Included w.e.f. 10.05.2019

IS 10322 : Part 5 : Sec 2 (2012)

Luminaires: Part 5 particular requirements: Sec 2 recessed luminaires (First Revision)

1000 V

58000 View breakup
For BIS Samples – 1.5 times the BIS testing charges. For others : Rs.58000/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(General Test Requireements)	-	375	Rs. 58000/- UPTO 1000V except Gonio Photometer , where our limit of testing will be 350 Volt only.
5(Classification of Luminaires')	-	375	-
6(Marking)	-	1000	-
7(Construction)	-	4000	-
8(Creepage Distance and Clearances)	-	2000	-
9(Provision for earthing)	-	1000	-
10(Terminals)	-	3000	-
11(External & Internal Wiring)	-	3000	-
12(Protection against electric shock)	-	750	-
13(Endurance Tests and Thermal Tests)	-	6000	-
14(Resistance to Dust and Moisture)	-	4000	-
15(Insulation Resistance and Electric Strength)	-	4000	-
16(Resistance to Heat , fire and tracking)	-	3500	-
17(Photometric Test)	-	25000	-

31 Dec, 2026

-
Included w.e.f. 11.09.2018 Up to 350 V ac only

IS 1180 : Part 1 (2014)

Outdoor Type Oil Immersed Distribution Transformers Upto and Including 2 500 kVA, 33kV - Specification Part 1 Mineral Oil Immersed (Fourth Revision)

2500KVA

208000 View breakup
For BIS Samples – 1.5 times the BIS testing charges. For others : Rs.35,000/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
21.5.3.1(For Single Phase Distribution Transformers Up to Including 25 kVA : pressure test (type test))	-	3500	Above 500KVA to 2500KVA Total Testing Charges: Rs 2.08L(For Routine test : Rs 37K) Above 100KVA to 500KVA Total Testing Charges: Rs 1.144L(For Routine test: Rs 30K) Single & 3 Phase Up to100KVA Total Testing Charges :Rs 8.944K (For Routine test: Rs 25K)
21.5.3.2(For Single Phase Distribution Transformers Up to Including 25 kVA : pressure test (routine test))	-	3500	Above 500KVA to 2500KVA Total Testing Charges: Rs 2.08L(For Routine test : Rs 37K) Above 100KVA to 500KVA Total Testing Charges: Rs 1.144L(For Routine test: Rs 30K) Single & 3 Phase Up to100KVA Total Testing Charges :Rs 8.944K (For Routine test: Rs 25K)
21.5.3.3(Oil leakage test (routine test))	-	3500.00	Above 500KVA to 2500KVA Total Testing Charges: Rs 2.08L(For Routine test : Rs 37K) Above 100KVA to 500KVA Total Testing Charges: Rs 1.144L(For Routine test: Rs 30K) Single & 3 Phase Up to100KVA Total Testing Charges :Rs 8.944K (For Routine test: Rs 25K)
13.1(Marking (Rating Plates))	-	2000.00	Above 500KVA to 2500KVA Total Testing Charges: Rs 2.08L(For Routine test : Rs 37K) Above 100KVA to 500KVA Total Testing Charges: Rs 1.144L(For Routine test: Rs 30K) Single & 3 Phase Up to100KVA Total Testing Charges :Rs 8.944K (For Routine test: Rs 25K)
13.2(Terminal Marking Plate)	-	2000.00	Above 500KVA to 2500KVA Total Testing Charges: Rs 2.08L(For Routine test : Rs 37K) Above 100KVA to 500KVA Total Testing Charges: Rs 1.144L(For Routine test: Rs 30K) Single & 3 Phase Up to100KVA Total Testing Charges :Rs 8.944K (For Routine test: Rs 25K)
13.3(Marking )	-	2000.00	Above 500KVA to 2500KVA Total Testing Charges: Rs 2.08L(For Routine test : Rs 37K) Above 100KVA to 500KVA Total Testing Charges: Rs 1.144L(For Routine test: Rs 30K) Single & 3 Phase Up to100KVA Total Testing Charges :Rs 8.944K (For Routine test: Rs 25K)
13.4(Marking)	-	2000.00	Above 500KVA to 2500KVA Total Testing Charges: Rs 2.08L(For Routine test : Rs 37K) Above 100KVA to 500KVA Total Testing Charges: Rs 1.144L(For Routine test: Rs 30K) Single & 3 Phase Up to100KVA Total Testing Charges :Rs 8.944K (For Routine test: Rs 25K)
13.4.1(Marking)	-	2000.00	Above 500KVA to 2500KVA Total Testing Charges: Rs 2.08L(For Routine test : Rs 37K) Above 100KVA to 500KVA Total Testing Charges: Rs 1.144L(For Routine test: Rs 30K) Single & 3 Phase Up to100KVA Total Testing Charges :Rs 8.944K (For Routine test: Rs 25K)
14.1(MOUNTING ARRANGEMENT)	-	2000.00	Above 500KVA to 2500KVA Total Testing Charges: Rs 2.08L(For Routine test : Rs 37K) Above 100KVA to 500KVA Total Testing Charges: Rs 1.144L(For Routine test: Rs 30K) Single & 3 Phase Up to100KVA Total Testing Charges :Rs 8.944K (For Routine test: Rs 25K)
14.2(MOUNTING ARRANGEMENT)	-	2000.00	Above 500KVA to 2500KVA Total Testing Charges: Rs 2.08L(For Routine test : Rs 37K) Above 100KVA to 500KVA Total Testing Charges: Rs 1.144L(For Routine test: Rs 30K) Single & 3 Phase Up to100KVA Total Testing Charges :Rs 8.944K (For Routine test: Rs 25K)
14.3(MOUNTING ARRANGEMENT)	-	2000.00	Above 500KVA to 2500KVA Total Testing Charges: Rs 2.08L(For Routine test : Rs 37K) Above 100KVA to 500KVA Total Testing Charges: Rs 1.144L(For Routine test: Rs 30K) Single & 3 Phase Up to100KVA Total Testing Charges :Rs 8.944K (For Routine test: Rs 25K)
14.4(MOUNTING ARRANGEMENT)	-	2000.00	Above 500KVA to 2500KVA Total Testing Charges: Rs 2.08L(For Routine test : Rs 37K) Above 100KVA to 500KVA Total Testing Charges: Rs 1.144L(For Routine test: Rs 30K) Single & 3 Phase Up to100KVA Total Testing Charges :Rs 8.944K (For Routine test: Rs 25K)
15.1.1(TRANSFORMER TANK : Construction)	-	2000.00	Above 500KVA to 2500KVA Total Testing Charges: Rs 2.08L(For Routine test : Rs 37K) Above 100KVA to 500KVA Total Testing Charges: Rs 1.144L(For Routine test: Rs 30K) Single & 3 Phase Up to100KVA Total Testing Charges :Rs 8.944K (For Routine test: Rs 25K)
15.1.2(TRANSFORMER TANK : Construction)	-	2000.00	Above 500KVA to 2500KVA Total Testing Charges: Rs 2.08L(For Routine test : Rs 37K) Above 100KVA to 500KVA Total Testing Charges: Rs 1.144L(For Routine test: Rs 30K) Single & 3 Phase Up to100KVA Total Testing Charges :Rs 8.944K (For Routine test: Rs 25K)
15.1.3(TRANSFORMER TANK : Construction)	-	2000.00	Above 500KVA to 2500KVA Total Testing Charges: Rs 2.08L(For Routine test : Rs 37K) Above 100KVA to 500KVA Total Testing Charges: Rs 1.144L(For Routine test: Rs 30K) Single & 3 Phase Up to100KVA Total Testing Charges :Rs 8.944K (For Routine test: Rs 25K)
15.1.4(TRANSFORMER TANK : Construction)	-	2000.00	Above 500KVA to 2500KVA Total Testing Charges: Rs 2.08L(For Routine test : Rs 37K) Above 100KVA to 500KVA Total Testing Charges: Rs 1.144L(For Routine test: Rs 30K) Single & 3 Phase Up to100KVA Total Testing Charges :Rs 8.944K (For Routine test: Rs 25K)
15.1.5(TRANSFORMER TANK : Construction)	-	2000.00	Above 500KVA to 2500KVA Total Testing Charges: Rs 2.08L(For Routine test : Rs 37K) Above 100KVA to 500KVA Total Testing Charges: Rs 1.144L(For Routine test: Rs 30K) Single & 3 Phase Up to100KVA Total Testing Charges :Rs 8.944K (For Routine test: Rs 25K)
21.2 a)(Measurement of winding resistance )	-	4000.00	Above 500KVA to 2500KVA Total Testing Charges: Rs 2.08L(For Routine test : Rs 37K) Above 100KVA to 500KVA Total Testing Charges: Rs 1.144L(For Routine test: Rs 30K) Single & 3 Phase Up to100KVA Total Testing Charges :Rs 8.944K (For Routine test: Rs 25K)
21.2 b)( Measurement of voltage ratio and check of phase displacemen)	-	4000.00	Above 500KVA to 2500KVA Total Testing Charges: Rs 2.08L(For Routine test : Rs 37K) Above 100KVA to 500KVA Total Testing Charges: Rs 1.144L(For Routine test: Rs 30K) Single & 3 Phase Up to100KVA Total Testing Charges :Rs 8.944K (For Routine test: Rs 25K)
21.2 c)( Measurement of short-circuit impedance (principal tapping, when applicable) and load loss at 50 percent and 100 percent load)	-	10000.00	Above 500KVA to 2500KVA Total Testing Charges: Rs 2.08L(For Routine test : Rs 37K) Above 100KVA to 500KVA Total Testing Charges: Rs 1.144L(For Routine test: Rs 30K) Single & 3 Phase Up to100KVA Total Testing Charges :Rs 8.944K (For Routine test: Rs 25K)
21.2 d)(Measurement of no-load loss and current)	-	6000.00	Above 500KVA to 2500KVA Total Testing Charges: Rs 2.08L(For Routine test : Rs 37K) Above 100KVA to 500KVA Total Testing Charges: Rs 1.144L(For Routine test: Rs 30K) Single & 3 Phase Up to100KVA Total Testing Charges :Rs 8.944K (For Routine test: Rs 25K)
21.2 e)(Measurement of insulation resistance)	-	4000.00	Above 500KVA to 2500KVA Total Testing Charges: Rs 2.08L(For Routine test : Rs 37K) Above 100KVA to 500KVA Total Testing Charges: Rs 1.144L(For Routine test: Rs 30K) Single & 3 Phase Up to100KVA Total Testing Charges :Rs 8.944K (For Routine test: Rs 25K)
21.2 f)(Induced over-voltage withstand test)	-	7000.00	Above 500KVA to 2500KVA Total Testing Charges: Rs 2.08L(For Routine test : Rs 37K) Above 100KVA to 500KVA Total Testing Charges: Rs 1.144L(For Routine test: Rs 30K) Single & 3 Phase Up to100KVA Total Testing Charges :Rs 8.944K (For Routine test: Rs 25K)
21.2 g)( Separate-source voltage withstand test)	-	5000.00	Above 500KVA to 2500KVA Total Testing Charges: Rs 2.08L(For Routine test : Rs 37K) Above 100KVA to 500KVA Total Testing Charges: Rs 1.144L(For Routine test: Rs 30K) Single & 3 Phase Up to100KVA Total Testing Charges :Rs 8.944K (For Routine test: Rs 25K)
21.5.3.3(Oil leakage test)	-	3500.00	Above 500KVA to 2500KVA Total Testing Charges: Rs 2.08L(For Routine test : Rs 37K) Above 100KVA to 500KVA Total Testing Charges: Rs 1.144L(For Routine test: Rs 30K) Single & 3 Phase Up to100KVA Total Testing Charges :Rs 8.944K (For Routine test: Rs 25K)
21.3(a )(Lightning impulse test)	-	45000.00	Above 500KVA to 2500KVA Total Testing Charges: Rs 2.08L(For Routine test : Rs 37K) Above 100KVA to 500KVA Total Testing Charges: Rs 1.144L(For Routine test: Rs 30K) Single & 3 Phase Up to100KVA Total Testing Charges :Rs 8.944K (For Routine test: Rs 25K)
21.3(b)(Temperature-rise test)	-	45000.00	Above 500KVA to 2500KVA Total Testing Charges: Rs 2.08L(For Routine test : Rs 37K) Above 100KVA to 500KVA Total Testing Charges: Rs 1.144L(For Routine test: Rs 30K) Single & 3 Phase Up to100KVA Total Testing Charges :Rs 8.944K (For Routine test: Rs 25K)
21.4 a)( Determination of sound levels)	-	10000.00	Above 500KVA to 2500KVA Total Testing Charges: Rs 2.08L(For Routine test : Rs 37K) Above 100KVA to 500KVA Total Testing Charges: Rs 1.144L(For Routine test: Rs 30K) Single & 3 Phase Up to100KVA Total Testing Charges :Rs 8.944K (For Routine test: Rs 25K)
21.5.1.1(Pressure test-Type test (For Transformers up to 200 kVA ))	-	6000.00	Above 500KVA to 2500KVA Total Testing Charges: Rs 2.08L(For Routine test : Rs 37K) Above 100KVA to 500KVA Total Testing Charges: Rs 1.144L(For Routine test: Rs 30K) Single & 3 Phase Up to100KVA Total Testing Charges :Rs 8.944K (For Routine test: Rs 25K)
21.5.1.2(Pressure test-routine test (For Transformers up to 200 kVA ))	-	5000.00	Above 500KVA to 2500KVA Total Testing Charges: Rs 2.08L(For Routine test : Rs 37K) Above 100KVA to 500KVA Total Testing Charges: Rs 1.144L(For Routine test: Rs 30K) Single & 3 Phase Up to100KVA Total Testing Charges :Rs 8.944K (For Routine test: Rs 25K)
21.5.2.3( Oil leakage test (routine test))	-	5000.00	Above 500KVA to 2500KVA Total Testing Charges: Rs 2.08L(For Routine test : Rs 37K) Above 100KVA to 500KVA Total Testing Charges: Rs 1.144L(For Routine test: Rs 30K) Single & 3 Phase Up to100KVA Total Testing Charges :Rs 8.944K (For Routine test: Rs 25K)
21.5.2.1(Type test : For Transformers Above 200 kVA and Up to Including 2 500 kVA)	-	5000.00	Above 500KVA to 2500KVA Total Testing Charges: Rs 2.08L(For Routine test : Rs 37K) Above 100KVA to 500KVA Total Testing Charges: Rs 1.144L(For Routine test: Rs 30K) Single & 3 Phase Up to100KVA Total Testing Charges :Rs 8.944K (For Routine test: Rs 25K)
21.5.2.2(routine test :For Transformers Above 200 kVA and Up to Including 2 500 kVA)	-	5000.00	Above 500KVA to 2500KVA Total Testing Charges: Rs 2.08L(For Routine test : Rs 37K) Above 100KVA to 500KVA Total Testing Charges: Rs 1.144L(For Routine test: Rs 30K) Single & 3 Phase Up to100KVA Total Testing Charges :Rs 8.944K (For Routine test: Rs 25K)

31 Dec, 2026

-
Included w.e.f. 10.05.2019 Excluding: Cl. 22.3 k) Short –circuit test

Bureau of Indian Standards

The National Standards Body of India

DELHI TEST HOUSE (65) KUNDLI-2 SONIPAT

Plot No. 65, Phase-IV, Sector-57, HSIDC Industrial Area, Behind Parnami Hospital, Kundli,, SONIPAT, Sonipat, Haryana, 131028

9810442016 rohit@delhitesthouse.com

Scope List