BIS - LIMS (Laboratory Information Management System)

DELHI TEST HOUSE (A Unit of Delhii Test House Global LLP) (65) KUNDLI-2 SONIPAT

Plot 65, Phase IV, Sector-57, HSIIDC Industrial Area, Kundli, Sonipat-131028, Haryana., SONIPAT, Sonipat, Haryana, 131028

9810442016 rohit@delhitesthouse.com

Scope List

Reset

104 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

IS 10322 : PART 5 : SEC 3 (2012)

Luminaires: Part 5 particular requirements: Sec 3 luminaires for road and street lighting (First Revision)

1000VAC

70000 View breakup
For BIS Samples – 1.5 times the BIS testing charges. For others : Rs.70000/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(General Test Requireements)	-	375	Rs 70000/- UPTO 1000V except Gonio Photometer , where our limit of testing will be 350 Volt only.
5(Classification of Luminaires')	-	375	-
7.0(Construction)	-	16000	-
8.0(Creepage Distance and Clearances)	-	2000	-
9.0(Provision for earthing)	-	1000	-
10.0(Terminals)	-	3000	-
11.0(External & Internal Wiring)	-	3000	-
12.0(Protection against electric shock)	-	750	-
13.0(Endurance Tests and Thermal Tests)	-	6000	-
14.0(Resistance to Dust & Moisture)	-	4000	-
15.0(Insulation Resistance and Electric Strength)	-	4000	-
16.0(Resistance to Heat , fire and tracking)	-	3500	-
17.0(Photometric Test)	-	25000	-
6.0(Marking)	-	1000	-

31 Dec, 2029

-
Included w.e.f. 11.09.2018 Up to 350 V ac only

IS 15633 (2005)

Automotive vehicles - Pneumatic tyres for passenger car vehicles - Diagonal and radial ply - Specification

86200 View breakup
For BIS Samples – 1.5 times the BIS testing charges. Rs.81200/- for Tube type Rs.86200/- for Tubeless

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4/4.1.1.1- Refer Annex B Col 2 and Annex D(test method )(Tyre dimensions/Section width)	-	1500	-
4/4.1.1.2- Refer Annex B Col 2 and Annex D(test method )(Tyre outer diameter)	-	1500	-
4.2.4(Outer diameter of the .tyre after the 6 hrs of the Load/Speed Performance Test shall not differ from the outer diameter measured before the test by more than + 3.5 percent.)	-	1500	-
4.3/4.3.1/4.3.2 Refer Annex E and Table 14( Endurance Test)	-	44200	-
4.4/4.4.1/4.4.2 Refer Annex F and Table 15 and 16(Bead Unseating Resistance Test for Tubeless Tyre )	-	5000	-
4.5/4.5.1(Tread-Wear -Indicators)	-	3500	-
4.5.1(Tread-Wear -Indicators)	-	3500	-
4.5.2(Each tread-wear indicator shall individually provide a means of indicating with a tolerance of +0.60 ,−0.00 mm when the tread grooves are no longer more than 1.6 mm deep.’)	-	500	-
4.6. Refer Annex G ,Table 17 and 18(Tyre.Strength Test)	-	12000	-
4/4.2.1 /4.2.2/4.2.3,Refer Annex D ,Table 13(Load/Speed Performance Test)	-	18000	-
4.4.3( In the case of the tyre of which the load capability index is not marked, it shall be classified according to the mzximum load capability corresponding to load capability index.)	-	500	-
4.5. Refer Annex C(Tread wear indicator measurement )	-	3500	-

31 Dec, 2029

-
-

IS 7098 : Part 1 (1988)

Specification for crosslinked polyethylene insulated pvc sheathed cables: Part 1 for working voltages up to and including 1100 volts (First Revision)

1.1KV

26000 View breakup
For BIS Samples – 1.5 times the BIS testing charges. For others : Single core - Rs. 6500/- Additional core(each) –Rs. 30% extra FR- Rs. 10000/- For FR-LSH- Rs. 14000/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(CONDUCTOR: MATERIALS)	-	50	For Type Test single core Except FR & FRLSH = 10000 Rs each additional cores Rs.1500 extra armoured cable= 1000 Rs for FR-Rs.10000 , for FRLSH Rs.16000
4(INSULATION : MATERIALS)	-	50	-
5.1(FILLER AND INNER SHEATH)	-	50	-
5.2(FILLER AND INNER SHEATH)	-	50	-
6(ARMOURING)	-	50	-
7(OUTER SHEATH)	-	50	-
8.1(CONDUCTOR: CONSTRUCTION)	-	50	-
8.2(PROTECTIVE BARRIER)	-	50	-
8.3(SIZE OF NEUTRAL CONDUCTOR)	-	50	-
9.1(Insulation Applied by extrusicn)	-	50	-
9.2(Thickness of Insulation - Average)	-	150	-
9.3(Thickness of Insulation - Minimum)	-	150	-
9.4(Application of Insulation)	-	50	-
10.1(Core Identification)	-	50	-
10.2(Core Identification- Neutral)	-	50	-
10.3(Core Identification by number )	-	50	-
10.4(Core Identification by number - Neutral )	-	50	-
11(LAVING UP OF CORES)	-	50	-
12.1 & 12.2(Inner sheath : Application)	-	50	-
12.3(Thickness of Inner Sheath)	-	150	-
13.1(Armouring: Application)	-	50	-
13.1.2(Armouring: Coverage )	-	200	-
13.1.3(Armouring: Direction of Lay )	-	50	-
13.2(Type of armour )	-	50	-
13.3(Armouring : Dimensions -Wire Diameter)	-	200	-
13.3(Armouring : Dimensions -Formed wire )	-	200	-
13.4(Armour: Joint)	-	50	-
13.5(Armouring : Resistance Test)	-	200	-
13.6 a)(ARMOURING: Tensile Strength)	-	500	-
13.6 b)(ARMOURING: Elongation )	-	200	-
13.6 c)(ARMOURING: Torsion Test (For round wire ) )	-	200	-
13.6 d)(ARMOURING: Winding Test(For formed wire))	-	200	-
13.6 e)(ARMOURING: Uniformity of zinc coating)	-	500	-
13.6 f)(ARMOURING: Mass of zinc coating )	-	100	-
13.6 g)(ARMOURING: Resistivity)	-	500	-
14.1(Outer Sheath : Application)	-	50	-
14.2(Colour of outer sheath)	-	50	-
14.3(Thickness of outer sheath - AVERAGE)	-	150	-
14.3(Thickness of outer sheath - minimum)	-	150	-
15.1 a) i)(Annealing Test ( For copper wire ) )	-	300	-
15.1 a) ii)(Tensile test (for aluminium) - Before stranding )	-	500	-
15.1 a) ii)(Tensile test (for aluminium) - After stranding )	-	100	-
15.1 a) iii)(Wrapping test (for aluminium))	-	100	-
15.1 a) iv)(Resistance test - Main conductor)	-	1500	-
15.1 a) iv)(Resistance test - Neutral conductor)	-	500	-
15.1 d) i) (Phyaical tests for insulation : Tensile Test)	-	500	-
15.1 d) i) (Phyaical tests for insulation : Elongation)	-	300	-
15.1 d) ii) (Phyaical tests for insulation - Ageing in air Oven : Tensile Variation )	-	600	-
15.1 d) ii) (Phyaical tests for insulation- Ageing in air oven : Elongation Variation )	-	600	-
15.1 d) iii) (Phyaical tests for insulation : Hot set )	-	150	single core 6500 each additional core 30 % extra For FR 10000 FR-LSH 14000
15.1 d) iii) (Phyaical tests for insulation : Permanent set )	-	150	-
15.1 d) iv) (Phyaical tests for insulation : Shrinkage )	-	300	-
15.1 e) iv) (Phyaical tests for Sheath : Shrinkage - Crack observed )	-	300	-
15.1 d) v) (Insulation: Waterabsorption(gravimetric))	-	800	-
15.1 e) i) (Physical tests for outer sheath : Tensile stregth)	-	250	-
15.1 e) i) (Physical tests for outer sheath : Elongation)	-	250	-
15.1 e) ii) (Physical tests for outer sheath- Ageing in air oven : Tensile stregth Variation )	-	700	-
15.1 e) ii) (Physical tests for outer sheath -Ageing in air oven : Elongation Variation )	-	500	-
15.1 e) iii) (Sheath: Loss of mass in air oven)	-	500	-
15.1 e) iv) (Phyaical tests for Sheath : Shrinkage )	-	200	-
15.1 e) v) (Sheath : Hot deformation)	-	200	-
15.1 e) vi) (Sheath : Heat shock test)	-	200	-
15.1 e) vii) (Sheath : Thermalstability)	-	200	-
15.1 f)(INSULATION RESISTANCE TEST : Volume resistivity )	-	500	-
16.2(HIGH VOLTAGE TEST )	-	500	-
16.3(FLAMMABILITY TEST : Period of Burning )	-	100	-
16.3(FLAMMABILITY TEST : Unaffected length )	-	100	-
16.9(Oxygen Index Test)	-	2000	-
16.1(Flame Retardance Test on Single Cables)	-	1000	-
16.11(Flame Retardance Test on Bunched Cables)	-	5000	-
16.13(Test for Halogen Acid Gas Evolution)	-	2000	-
16.14(Temperature Index)	-	2000	-
17.1(Manufacturer'. identification)	-	50	-
17.2(cable Indentification )	-	50	-
17.3(cable Code )	-	50	-
15.4 (a)(Cold bend)	-	500	-
15.4 (b)(Cold impact)	-	500	-
Cl No. 16.15(Smoke density test)	-	1000	-

31 Dec, 2029

-
Included w.e.f. 10.05.2019

IS 398 : Part 1 (1996)

Aluminium conductors for overhead transmission purposes - Specification: Part 1 aluminium stranded conductors (Third Revision)

5625 View breakup
For BIS Samples – 1.5 times the BIS testing charges. For others : Rs. 10,000/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
12.2, Table-1(Measurement of diameter of individual aluminium wire)	-	1000	-
12.3, Table-1(Breaking load before stranding)	-	1000	-
12.3, Table-1(Breaking load after stranding)	-	1000	-
12.4(Wrapping test)	-	500	-
12.5, Table 1(Resistance test)	-	1000	-
12.6, Table 3(Measurement of lay ratio)	-	625	-
9.3(Stranding)	-	100	-
6(Freedom from defects)	-	100	-
7.2.1(Sizes)	-	100	-
8, 8.1, 8.2(Joint in wires, except during stranding)	-	100	-
9.4(Multiple layer of wires)	-	100	-

31 Dec, 2029

-
Included w.e.f. 10.05.2019

IS 398 : Part 4 (1994)

Aluminium conductors for overhead transmission purposes: Part 4 aluminium alloy stranded conductors (Aluminium - Magnesium - Silicon Type) - Specification (Third Revision)

10000 View breakup
For BIS Samples – 1.5 times the BIS testing charges. For others : Rs. 10,000/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1(Freedom from Defects)	-	500	-
7.1 Table-1(Dimensional measurement of wires)	-	1500	-
7.2.2 Table-2, Table-4(Calculated resistance of Stranded Conductor)	-	500	-
8.1(Joints in wires-Conductors Containing Seven Wires)	-	500	-
8.2(Joints in wires-Conductors Containing More Than Seven Wires)	-	500	-
9.1(Stranding)	-	500	-
9.2 Table 3(Lay Ratio of stranded conductors)	-	500	-
9.3(Direction of Lay)	-	500	-
9.4(Multiple layers of wires)	-	500	-
11(Packing and Marking)	-	500	-
12.2 Table 1(Breaking Load Test- Before Stranding)	-	500	-
12.2 Table 1(Breaking Load Test- After Stranding)	-	500	-
12.3 Table 1(Elongation Test- Before Stranding)	-	500	-
12.3 Table 1(Elongation Test- After Stranding)	-	500	-
12.4 Table 1(Resistance of Aluminium wire)	-	2000	-

31 Dec, 2029

-
Included w.e.f. 10.05.2019

IS 398 : Part 2 (1996)

Aluminium conductors for overhead transmission purposes - Specification: Part 2 aluminium conuuctors, galvanized steel - Reinforced (Third Revision)

20875 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.1.1 & 13.2 Table-1 (mech)(Diameter of Aluminium Wires Before Stranding)	-	350	-
8.1.1 & 13.2 Table 2 (mech)(Diameter of Steel Wires Before Stranding)	-	350	-
8.1.1 & 13.2 Table-1 (mech)(Diameter of Aluminium Wires After Stranding)	-	350	-
8.1.1 & 13.2 Table 2 (mech)(Diameter of Steel Wires After Stranding)	-	350	-
10 (elec)(Stranding)	-	225	-
10 (elec)(Stranding)	-	225	-
10 (mech)(Stranding)	-	225	-
13.3 Table 1 (mech)(Breaking Load of Aluminium Wires Before Stranding)	-	400	-
13.3 Table 2 (mech)(Breaking Load of Steel Wires Before Stranding)	-	400	-
13.3 Table 1 (mech)(Breaking Load of Aluminium Wires After Stranding)	-	400	-
13.3 Table 2 (mech)(Breaking Load of Steel Wires After Stranding)	-	400	-
13.4.1 (mech)(Ductility by Torsion Test before stranding)	-	400	-
13.4.1 (mech)(Ductility by Torsion Test before stranding)	-	400	-
13.4.1 (mech)(Ductility by Torsion Test after stranding)	-	400	-
13.4.1 (mech)(Ductility by Torsion Test after stranding)	-	400	-
13.4.2 (elec)(Ductility by Elongation Test before stranding)	-	500	-
13.4.2 (elec)(Ductility by Elongation Test after stranding)	-	500	-
13.5.1 (mech)(Wrapping Test Aluminium Wires Before Stranding)	-	325	-
13.5.1 (mech)(Wrapping Test Aluminium Wires After Stranding)	-	325	-
13.5.2 (mech)(Wrapping Test Galvanized Steel Wires Before Stranding)	-	500	-
13.6 (elec)(Resistance test-Aluminium wire before Stranding)	-	800	-
13.6 (elec)(Resistance test-Aluminium wire after stranding)	-	800	-
13.7.2 (chem)(Mass of Zinc coating)	-	600	-
13.7.2 (chem)(Uniformity of Zinc coating)	-	600	-
13.8 Table-4 (mech)(Lay Ratio- Aluminium Wire Outermost Layer)	-	250	-
13.8 Table-4 (mech)(Lay Ratio- Aluminium Wire Layer Immediately Beneath Outermost Layer)	-	100	-
13.8 Table-4 (mech)(Lay Ratio- Aluminium Wire Innermost Layer of Conductors with 3 Aluminium Wire Layers)	-	100	-
13.8 Table-4 (mech)(Lay Ratio- Steel Core (6 Wire Layer))	-	100	-
13.9 (elec)(Surface condition test)	-	2500	-
13.10 (elec)(Ultimate breaking load)	-	2500	-
13.11 (elec)(Stress-strain test)	-	5000	Rs 10000 except surface condition ,ultimate breaking load & stress strain test
10 (elec)(Stranding)	-	100	-

31 Dec, 2029

-
Included w.e.f. 10.05.2019

IS/IEC 60730 : Part 2 : Sec 9 (2011)

Automatic Electrical Controls for Household and Similar Use Part 2 Particular Requirements Section 9 Temperature Sensing Controls

225000 View breakup
Rs.2,25,000/- for complete EMI/EMC test only

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
23(As per cl 23.1 to 23.1.2)	-	80000		EMC requirements – emission
26(as per annexure H)	-	140000		EMC requirements – immunity

31 Dec, 2029

-
Excluding : i) Cl 23- EMI/EMC requirements-Emission. ii) Cl 26 – EMI/ EMC requirements- Immunity.

IS 1554 : Part 1 (1988)

Specification for pvc insulated (Heavy Duty) electric cables: Part 1 for working voltages up to and including 1100 v (Third Revision)

1.1 KV

26000 View breakup
For BIS Samples – 1.5 times the BIS testing charges. For others : Single core unarmored cable- Rs. 6500/- Additional core(each) –Rs. 1500/- Extra armored cable – Rs.1000 for FR- Rs. 10000/- For FR-LSH- Rs. 14000/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(MATERIALS : CONDUCTOR)	-	30	For Type Test single core Except FR & FRLSH = 10000 Rs each additional cores Rs.1500 extra armoured cable= 1000 Rs for FR-Rs.10000 , for FRLSH Rs.16000
4.1.1(INSULATION : General Purjose Insulaiion)	-	30	-
4.1.2(INSULATION : Heat Resisting Insulation)	-	30	-
5.1(MATERIALS : FILLER AND INNER SHEATH)	-	30	-
5.2(MATERIALS : FILLER AND INNER SHEATH)	-	30	-
6.1(MATERIALS : ARMGURING)	-	30	-
6.2(MATERIALS : ARMGURING)	-	30	-
7.1.1(OUTER SHEATH : For Cables with General Purpose InsuIafion)	-	30	-
7.1.2(OUTER SHEATH : For Cables with Heat Resisting InsuIalion)	-	30	-
8.1(CONSTRUCTION : CONDUCTOR)	-	30	-
8.2(CONSTRUCTION : CONDUCTOR)	-	50	-
9.1(INSULATION )	-	50	-
9.2(INSULATION : Thickness of Insulation)	-	500	-
9.3(INSULATION :Tolerance on Thickness of Insulation)	-	500	-
9.4(INSULATION : Application of Insulation)	-	50	-
10.1(CORE IDENTIFICATION)	-	50	-
10.2(CORE IDENTIFICATION)	-	50	-
10.3(CORE IDENTIFICATION)	-	50	-
10.3.1(Arrangement of Marking)	-	50	-
11.1(LAYING UP OF CORES)	-	50	-
11.2(LAYING UP OF CORES)	-	50	-
12.1(INNER SHEATH)	-	50	-
12.2(INNER SHEATH)	-	50	-
12.3(INNER SHEATH :Thickness of Inner Sheath)	-	500	-
12.3.1(INNER SHEATH :Thickness of Inner Sheath)	-	500	-
13.1.1(ARMOURING : Application)	-	50	-
13.1.2(Armouring: Coverage )	-	500	-
13.1.3(ARMOURING : Direction of lay )	-	50	-
13.1.4(ARMOURING : Application)	-	50	-
13.2(ARMOURING : Type of Armour)	-	50	-
13.3(Armouring : Dimensions -Wire Diameter)	-	200	-
13.3(Armouring : Dimensions -Formed wire )	-	200	-
13.4(ARMOURING : Joints)	-	50	-
13.5.1(ARMOURING : Resistance)	-	30	-
13.5.2(ARMOURING : Resistance)	-	30	-
13.6 a)(ARMOURING: Tensile Strength)	-	500	-
13.6 b)(ARMOURING: Elongation )	-	200	-
13.6 c)(ARMOURING: Torsion Test (For round wire ) )	-	200	-
13.6 d)(ARMOURING: Winding Test(For formed wire))	-	200	-
13.6 e)(ARMOURING: Uniformity of zinc coating)	-	500	-
13.6 f)(ARMOURING: Mass of zinc coating )	-	200	-
13.6 g)(ARMOURING: Resistivity)	-	500	-
14.1(OUTER SHEATH)	-	30	-
14.2(OUTER SHEATH)	-	30	-
14.3(OUTER SHEATH : Colour )	-	30	-
14.4.1(Thickness of Outer Sheath : Unarmowed Cables)	-	30	-
14.4.2(Thickness of Outer Sheath : Armoured Cables)	-	300	-
15.1 a) 1)(Tests on conductor : Annealing test ( for copper ))	-	100	-
15.1 a) 2)(Tensile test (for aluminium) - Before stranding )	-	500	-
15.1 a) 2)(Tensile test (for aluminium) - After stranding )	-	100	-
15.1 a) 3)(Tests on conductor : Wrapping test ( for aluminium ))	-	200	-
15.1 a) 4)(Tests on conductor : Conductor resistance test)	-	1500	-
15.1 a) 4)(Resistance test - Neutral conductor )	-	500	-
15.1 d)1)(Phyaical tests for insulation : Tensile Test)	-	500	-
15.1 d)1)(Phyaical tests for insulation : Elongation )	-	200	-
15.1 d)1)(Physical tests for sheath : Tensile stregth )	-	500	-
15.1 d)1)(Physical tests for sheath : Elongation )	-	200	-
15.1 d)2)(Phyaical tests for insulation- Ageing in air Oven : Tensile Test)	-	500	-
15.1 d)2)(Phyaical tests for insulation - Ageing in air oven : Elongation )	-	300	-
15.1 d)2)(Phyaical tests for insulation - Ageing in air Oven : Tensile Variation )	-	300	-
15.1 d)2)(Phyaical tests for insulation- Ageing in air oven : Elongation Variation )	-	300	-
15.1 d)2)(Physical tests for outer sheath- Ageing in air oven : Tensile stregth )	-	500	-
15.1 d)2)(Physical tests for outer sheath -Ageing in air oven : Elongation )	-	300	-
15.1 d)2)(Physical tests for outer sheath -Ageing in air oven : Elongation Variation )	-	300	-
15.1 d)3)(Phyaical tests for insulation : Shrinkage )	-	200	-
15.1 d)3)(Phyaical tests for insulation : Shrinkage - Crack observed )	-	200	-
15.1 d)3)(Phyaical tests for Sheath : Shrinkage )	-	200	-
15.1 d)3)(Phyaical tests for Sheath : Shrinkage - Crack observed )	-	200	-
15.1 d)4)(Hot deformation : Insulation )	-	200	-
15.1 d)4)(Hot deformation : Sheath )	-	200	-
15.1 d)5)( Loss of mass in air oven- Insulation )	-	300	-
15.1 d)5)( Loss of mass in air oven- sheath )	-	800	-
15.1 d)6)(Heat shock test- Insulation )	-	200	-
15.1 d)6)(Heat shock test- sheath )	-	500	-
15.1 d)7)(Thermal stability- insulation )	-	100	-
15.1 d)7)(Thermal stability- Sheath )	-	500	-
15.1 e)(Insulation resistance test : Volume Resistivity )	-	200	-
15.1 e)(Insulation resistance test : IR Constant )	-	1000	-
15.1 f)(High voltage test ( water immersion test ))	-	400	-
15.1 g)(High voltage test at room temperature)	-	500	-
16.3.2(High Voltage Test ( Water Immersion Test ) : d.c. Test)	-	500	-
16.4(Flammability Test)	-	100	-
16.5(Oxygen Index Test)	-	2000	-
16.6(Flame Retardance Test on Single Cables)	-	1000	-
16.7(Flame Retardance Test on Bunched Cables)	-	5000	-
16.9(Test for Halogen Acid Gas Evolution)	-	2000	-
16.1(Temperature Index)	-	2000	-
17.1(IDENTIFICATION : Manufacturer’s Identification)	-	30	-
17.2(IDENTIFICATION : Cable Identification)	-	30	-
17.2.1(IDENTIFICATION : Cable Identification)	-	30	-
17.3(IDENTIFICATION : Cable Code)	-	30	-
15.4 a)(Cold bend test- Insulation ( Optional test))	-	200	-
15.4 a)(Cold bend test- Sheath ( Optional test))	-	200	-
15.4 b)(Cold impact test- Insulation ( Optional test))	-	200	-
15.4 b)(Cold impact test- Sheath ( Optional test))	-	200	-
15.4 c)(Armour resistance test ( for other than mining cables ).- Optional test )	-	200	-
16.1(DETAILS OF TESTS : General)	-	30	-
16.2(DETAILS OF TESTS : High Voltage Test at Room Temperature)	-	400	-
16.3.1(High Voltage Test ( Water Immersion Test ) : a.c. Test)	-	500	-
13.2.1(ARMOURING : Type of Armour)	-	30	-

31 Dec, 2029

-
Included w.e.f. 10.05.2019

IS 10322 : Part 5 : Sec 2 (2012)

Luminaires: Part 5 particular requirements: Sec 2 recessed luminaires (First Revision)

1000 V

58000 View breakup
For BIS Samples – 1.5 times the BIS testing charges. For others : Rs.58000/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(General Test Requireements)	-	375	Rs. 58000/- UPTO 1000V except Gonio Photometer , where our limit of testing will be 350 Volt only.
5(Classification of Luminaires')	-	375	-
6(Marking)	-	1000	-
7(Construction)	-	4000	-
8(Creepage Distance and Clearances)	-	2000	-
9(Provision for earthing)	-	1000	-
10(Terminals)	-	3000	-
11(External & Internal Wiring)	-	3000	-
12(Protection against electric shock)	-	750	-
13(Endurance Tests and Thermal Tests)	-	6000	-
14(Resistance to Dust and Moisture)	-	4000	-
15(Insulation Resistance and Electric Strength)	-	4000	-
16(Resistance to Heat , fire and tracking)	-	3500	-
17(Photometric Test)	-	25000	-

31 Dec, 2029

-
Included w.e.f. 11.09.2018 Up to 350 V ac only

100

IS 1180 : Part 1 (2014)

Outdoor Type Oil Immersed Distribution Transformers Upto and Including 2 500 kVA, 33kV - Specification Part 1 Mineral Oil Immersed (Fourth Revision)

2500KVA

208000 View breakup
For BIS Samples – 1.5 times the BIS testing charges. For others : Rs.35,000/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
21.5.3.1(For Single Phase Distribution Transformers Up to Including 25 kVA : pressure test (type test))	-	3500	Above 500KVA to 2500KVA Total Testing Charges: Rs 2.08L(For Routine test : Rs 37K) Above 100KVA to 500KVA Total Testing Charges: Rs 1.144L(For Routine test: Rs 30K) Single & 3 Phase Up to100KVA Total Testing Charges :Rs 8.944K (For Routine test: Rs 25K)
21.5.3.2(For Single Phase Distribution Transformers Up to Including 25 kVA : pressure test (routine test))	-	3500	Above 500KVA to 2500KVA Total Testing Charges: Rs 2.08L(For Routine test : Rs 37K) Above 100KVA to 500KVA Total Testing Charges: Rs 1.144L(For Routine test: Rs 30K) Single & 3 Phase Up to100KVA Total Testing Charges :Rs 8.944K (For Routine test: Rs 25K)
21.5.3.3(Oil leakage test (routine test))	-	3500.00	Above 500KVA to 2500KVA Total Testing Charges: Rs 2.08L(For Routine test : Rs 37K) Above 100KVA to 500KVA Total Testing Charges: Rs 1.144L(For Routine test: Rs 30K) Single & 3 Phase Up to100KVA Total Testing Charges :Rs 8.944K (For Routine test: Rs 25K)
13.1(Marking (Rating Plates))	-	2000.00	Above 500KVA to 2500KVA Total Testing Charges: Rs 2.08L(For Routine test : Rs 37K) Above 100KVA to 500KVA Total Testing Charges: Rs 1.144L(For Routine test: Rs 30K) Single & 3 Phase Up to100KVA Total Testing Charges :Rs 8.944K (For Routine test: Rs 25K)
13.2(Terminal Marking Plate)	-	2000.00	Above 500KVA to 2500KVA Total Testing Charges: Rs 2.08L(For Routine test : Rs 37K) Above 100KVA to 500KVA Total Testing Charges: Rs 1.144L(For Routine test: Rs 30K) Single & 3 Phase Up to100KVA Total Testing Charges :Rs 8.944K (For Routine test: Rs 25K)
13.3(Marking )	-	2000.00	Above 500KVA to 2500KVA Total Testing Charges: Rs 2.08L(For Routine test : Rs 37K) Above 100KVA to 500KVA Total Testing Charges: Rs 1.144L(For Routine test: Rs 30K) Single & 3 Phase Up to100KVA Total Testing Charges :Rs 8.944K (For Routine test: Rs 25K)
13.4(Marking)	-	2000.00	Above 500KVA to 2500KVA Total Testing Charges: Rs 2.08L(For Routine test : Rs 37K) Above 100KVA to 500KVA Total Testing Charges: Rs 1.144L(For Routine test: Rs 30K) Single & 3 Phase Up to100KVA Total Testing Charges :Rs 8.944K (For Routine test: Rs 25K)
13.4.1(Marking)	-	2000.00	Above 500KVA to 2500KVA Total Testing Charges: Rs 2.08L(For Routine test : Rs 37K) Above 100KVA to 500KVA Total Testing Charges: Rs 1.144L(For Routine test: Rs 30K) Single & 3 Phase Up to100KVA Total Testing Charges :Rs 8.944K (For Routine test: Rs 25K)
14.1(MOUNTING ARRANGEMENT)	-	2000.00	Above 500KVA to 2500KVA Total Testing Charges: Rs 2.08L(For Routine test : Rs 37K) Above 100KVA to 500KVA Total Testing Charges: Rs 1.144L(For Routine test: Rs 30K) Single & 3 Phase Up to100KVA Total Testing Charges :Rs 8.944K (For Routine test: Rs 25K)
14.2(MOUNTING ARRANGEMENT)	-	2000.00	Above 500KVA to 2500KVA Total Testing Charges: Rs 2.08L(For Routine test : Rs 37K) Above 100KVA to 500KVA Total Testing Charges: Rs 1.144L(For Routine test: Rs 30K) Single & 3 Phase Up to100KVA Total Testing Charges :Rs 8.944K (For Routine test: Rs 25K)
14.3(MOUNTING ARRANGEMENT)	-	2000.00	Above 500KVA to 2500KVA Total Testing Charges: Rs 2.08L(For Routine test : Rs 37K) Above 100KVA to 500KVA Total Testing Charges: Rs 1.144L(For Routine test: Rs 30K) Single & 3 Phase Up to100KVA Total Testing Charges :Rs 8.944K (For Routine test: Rs 25K)
14.4(MOUNTING ARRANGEMENT)	-	2000.00	Above 500KVA to 2500KVA Total Testing Charges: Rs 2.08L(For Routine test : Rs 37K) Above 100KVA to 500KVA Total Testing Charges: Rs 1.144L(For Routine test: Rs 30K) Single & 3 Phase Up to100KVA Total Testing Charges :Rs 8.944K (For Routine test: Rs 25K)
15.1.1(TRANSFORMER TANK : Construction)	-	2000.00	Above 500KVA to 2500KVA Total Testing Charges: Rs 2.08L(For Routine test : Rs 37K) Above 100KVA to 500KVA Total Testing Charges: Rs 1.144L(For Routine test: Rs 30K) Single & 3 Phase Up to100KVA Total Testing Charges :Rs 8.944K (For Routine test: Rs 25K)
15.1.2(TRANSFORMER TANK : Construction)	-	2000.00	Above 500KVA to 2500KVA Total Testing Charges: Rs 2.08L(For Routine test : Rs 37K) Above 100KVA to 500KVA Total Testing Charges: Rs 1.144L(For Routine test: Rs 30K) Single & 3 Phase Up to100KVA Total Testing Charges :Rs 8.944K (For Routine test: Rs 25K)
15.1.3(TRANSFORMER TANK : Construction)	-	2000.00	Above 500KVA to 2500KVA Total Testing Charges: Rs 2.08L(For Routine test : Rs 37K) Above 100KVA to 500KVA Total Testing Charges: Rs 1.144L(For Routine test: Rs 30K) Single & 3 Phase Up to100KVA Total Testing Charges :Rs 8.944K (For Routine test: Rs 25K)
15.1.4(TRANSFORMER TANK : Construction)	-	2000.00	Above 500KVA to 2500KVA Total Testing Charges: Rs 2.08L(For Routine test : Rs 37K) Above 100KVA to 500KVA Total Testing Charges: Rs 1.144L(For Routine test: Rs 30K) Single & 3 Phase Up to100KVA Total Testing Charges :Rs 8.944K (For Routine test: Rs 25K)
15.1.5(TRANSFORMER TANK : Construction)	-	2000.00	Above 500KVA to 2500KVA Total Testing Charges: Rs 2.08L(For Routine test : Rs 37K) Above 100KVA to 500KVA Total Testing Charges: Rs 1.144L(For Routine test: Rs 30K) Single & 3 Phase Up to100KVA Total Testing Charges :Rs 8.944K (For Routine test: Rs 25K)
21.2 a)(Measurement of winding resistance )	-	4000.00	Above 500KVA to 2500KVA Total Testing Charges: Rs 2.08L(For Routine test : Rs 37K) Above 100KVA to 500KVA Total Testing Charges: Rs 1.144L(For Routine test: Rs 30K) Single & 3 Phase Up to100KVA Total Testing Charges :Rs 8.944K (For Routine test: Rs 25K)
21.2 b)( Measurement of voltage ratio and check of phase displacemen)	-	4000.00	Above 500KVA to 2500KVA Total Testing Charges: Rs 2.08L(For Routine test : Rs 37K) Above 100KVA to 500KVA Total Testing Charges: Rs 1.144L(For Routine test: Rs 30K) Single & 3 Phase Up to100KVA Total Testing Charges :Rs 8.944K (For Routine test: Rs 25K)
21.2 c)( Measurement of short-circuit impedance (principal tapping, when applicable) and load loss at 50 percent and 100 percent load)	-	10000.00	Above 500KVA to 2500KVA Total Testing Charges: Rs 2.08L(For Routine test : Rs 37K) Above 100KVA to 500KVA Total Testing Charges: Rs 1.144L(For Routine test: Rs 30K) Single & 3 Phase Up to100KVA Total Testing Charges :Rs 8.944K (For Routine test: Rs 25K)
21.2 d)(Measurement of no-load loss and current)	-	6000.00	Above 500KVA to 2500KVA Total Testing Charges: Rs 2.08L(For Routine test : Rs 37K) Above 100KVA to 500KVA Total Testing Charges: Rs 1.144L(For Routine test: Rs 30K) Single & 3 Phase Up to100KVA Total Testing Charges :Rs 8.944K (For Routine test: Rs 25K)
21.2 e)(Measurement of insulation resistance)	-	4000.00	Above 500KVA to 2500KVA Total Testing Charges: Rs 2.08L(For Routine test : Rs 37K) Above 100KVA to 500KVA Total Testing Charges: Rs 1.144L(For Routine test: Rs 30K) Single & 3 Phase Up to100KVA Total Testing Charges :Rs 8.944K (For Routine test: Rs 25K)
21.2 f)(Induced over-voltage withstand test)	-	7000.00	Above 500KVA to 2500KVA Total Testing Charges: Rs 2.08L(For Routine test : Rs 37K) Above 100KVA to 500KVA Total Testing Charges: Rs 1.144L(For Routine test: Rs 30K) Single & 3 Phase Up to100KVA Total Testing Charges :Rs 8.944K (For Routine test: Rs 25K)
21.2 g)( Separate-source voltage withstand test)	-	5000.00	Above 500KVA to 2500KVA Total Testing Charges: Rs 2.08L(For Routine test : Rs 37K) Above 100KVA to 500KVA Total Testing Charges: Rs 1.144L(For Routine test: Rs 30K) Single & 3 Phase Up to100KVA Total Testing Charges :Rs 8.944K (For Routine test: Rs 25K)
21.5.3.3(Oil leakage test)	-	3500.00	Above 500KVA to 2500KVA Total Testing Charges: Rs 2.08L(For Routine test : Rs 37K) Above 100KVA to 500KVA Total Testing Charges: Rs 1.144L(For Routine test: Rs 30K) Single & 3 Phase Up to100KVA Total Testing Charges :Rs 8.944K (For Routine test: Rs 25K)
21.3(a )(Lightning impulse test)	-	45000.00	Above 500KVA to 2500KVA Total Testing Charges: Rs 2.08L(For Routine test : Rs 37K) Above 100KVA to 500KVA Total Testing Charges: Rs 1.144L(For Routine test: Rs 30K) Single & 3 Phase Up to100KVA Total Testing Charges :Rs 8.944K (For Routine test: Rs 25K)
21.3(b)(Temperature-rise test)	-	45000.00	Above 500KVA to 2500KVA Total Testing Charges: Rs 2.08L(For Routine test : Rs 37K) Above 100KVA to 500KVA Total Testing Charges: Rs 1.144L(For Routine test: Rs 30K) Single & 3 Phase Up to100KVA Total Testing Charges :Rs 8.944K (For Routine test: Rs 25K)
21.4 a)( Determination of sound levels)	-	10000.00	Above 500KVA to 2500KVA Total Testing Charges: Rs 2.08L(For Routine test : Rs 37K) Above 100KVA to 500KVA Total Testing Charges: Rs 1.144L(For Routine test: Rs 30K) Single & 3 Phase Up to100KVA Total Testing Charges :Rs 8.944K (For Routine test: Rs 25K)
21.5.1.1(Pressure test-Type test (For Transformers up to 200 kVA ))	-	6000.00	Above 500KVA to 2500KVA Total Testing Charges: Rs 2.08L(For Routine test : Rs 37K) Above 100KVA to 500KVA Total Testing Charges: Rs 1.144L(For Routine test: Rs 30K) Single & 3 Phase Up to100KVA Total Testing Charges :Rs 8.944K (For Routine test: Rs 25K)
21.5.1.2(Pressure test-routine test (For Transformers up to 200 kVA ))	-	5000.00	Above 500KVA to 2500KVA Total Testing Charges: Rs 2.08L(For Routine test : Rs 37K) Above 100KVA to 500KVA Total Testing Charges: Rs 1.144L(For Routine test: Rs 30K) Single & 3 Phase Up to100KVA Total Testing Charges :Rs 8.944K (For Routine test: Rs 25K)
21.5.2.3( Oil leakage test (routine test))	-	5000.00	Above 500KVA to 2500KVA Total Testing Charges: Rs 2.08L(For Routine test : Rs 37K) Above 100KVA to 500KVA Total Testing Charges: Rs 1.144L(For Routine test: Rs 30K) Single & 3 Phase Up to100KVA Total Testing Charges :Rs 8.944K (For Routine test: Rs 25K)
21.5.2.1(Type test : For Transformers Above 200 kVA and Up to Including 2 500 kVA)	-	5000.00	Above 500KVA to 2500KVA Total Testing Charges: Rs 2.08L(For Routine test : Rs 37K) Above 100KVA to 500KVA Total Testing Charges: Rs 1.144L(For Routine test: Rs 30K) Single & 3 Phase Up to100KVA Total Testing Charges :Rs 8.944K (For Routine test: Rs 25K)
21.5.2.2(routine test :For Transformers Above 200 kVA and Up to Including 2 500 kVA)	-	5000.00	Above 500KVA to 2500KVA Total Testing Charges: Rs 2.08L(For Routine test : Rs 37K) Above 100KVA to 500KVA Total Testing Charges: Rs 1.144L(For Routine test: Rs 30K) Single & 3 Phase Up to100KVA Total Testing Charges :Rs 8.944K (For Routine test: Rs 25K)

31 Dec, 2029

-
Included w.e.f. 10.05.2019 Excluding: Cl. 22.3 k) Short –circuit test

101

IS 10322 : Part 5 : Sec 5 (2013)

Luminaires: Part 5 particular requirements: Sec 5 floodlights (First Revision)

1000V

61500 View breakup
For BIS Samples – 1.5 times the BIS testing charges. For others : Rs. 61,500/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(General Test Requireements)	-	375	Rs 61500/- UPTO 1000V except Gonio Photometer , where our limit of testing will be 350 Volt only.
5(Classification of Luminaires')	-	375	-
6.0(Marking)	-	1000	-
7.0(Construction)	-	7500	-
8.0(Creepage Distance and Clearances)	-	2000	-
9.0(Provision for earthing)	-	1000	-
10.0(Terminals)	-	3000	-
11.0(External & Internal Wiring)	-	3000	-
12.0(Protection against electric shock)	-	750	-
13.0(Endurance Tests and Thermal Tests)	-	6000	-
14.0(Resistance to Dust & Moisture)	-	4000	-
15.0(Insulation Resistance and Electric Strength)	-	4000	-
16.0(Resistance to Heat , fire and tracking)	-	3500	-
17.0(Photometric Test)	-	25000	-

31 Dec, 2029

-
Included w.e.f. 11.09.2018 Up to 350 V ac only

102

IS 694 (2010)

Polyvinyl chloride insulated unsheathed and sheathed cables/cords with rigid and flexible conductor for rated voltages up to and including 450/750 v (Fourth Revision)

1.1kV

24000 View breakup
For BIS Samples – 1.5 times the BIS testing charges. For others : Single core- Rs. 10,000/- Additional core(each) –Rs. 1000/- FR – Rs. 10,000/- FR-LSH- Rs. 14000/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
13(Cable code)	-	50	Type Test Without FR & FRLSH for Single Core = 10000 each additional core 1000 FR 10000 FR-LSH 14000
11.2(Legibility)	-	50	-
11.1(Durability)	-	50	-
11(Identification)	-	50	-
10.9(Additional ageing test (OU cables only) -HV test (at 60±3oC))	-	1000	-
10.4(Flammability test- Unaffected portion)	-	250	-
10.4(Flammability test-Burning after flame removal)	-	250	-
4.1(Annealing test (for copper))	-	200	-
table 1 e) 3) (IR constant- Room temp )	-	500	-
9.1(Ovality)	-	200	-
table 1 e) 3) (Volume Resistivity - Room temp )	-	500	-
10.2(HV (room temperature))	-	500	-
10.1(HV (water immersion))	-	500	-
10.1(HV (water immersion))	-	500	-
10.8(Smoke density rating)	-	2000	-
10.6(Halogen evolution)	-	2000	-
10.7(Temperature index)	-	5000	-
10.5(Oxygen index)	-	5000	-
Table 1 iii) d) 9)(Cold impact for sheath)	-	500	-
Table 1 iii) d) 8)(Cold bend for sheath)	-	500	-
Table 1(Category Code)	-	50	-
Table 1 iii) d) 7)(Thermal stability- Sheath )	-	500	-
Table 1 iii) c) 7)(Thermal stability- Insulation )	-	500	-
Table 1 iii) d) 6)(Hot deformation -Indentation depth - Sheath )	-	500	-
Table 1 iii) c) 6)(Hot deformation - Indentation depth- Insulation)	-	500	-
Table 1 iii) d) 5)(Heat shock-Sheath )	-	500	-
Table 1 iii) c) 5)(Heat shock-Insulation )	-	500	-
Table 1 iii) d) 4)(Cracks Observed)	-	50	-
Table 1 iii) d) 4)(Shrinkage- Sheath )	-	500	-
Table 1 iii) c) 4)(Cracks Observed)	-	50	-
Table 1 iii) c) 4)(Shrinkage-Insulation)	-	500	-
Table 1 iii) d) 2)(Loss of mass- Sheath )	-	500	-
Table 1 iii) c) 2)(Loss of mass- Insulation )	-	500	-
Table 1 iii) d) 3)(Sheath- Elongation variation)	-	500	-
Table 1 iii) d) 3)(Sheath- TS variation)	-	500	-
Table 1 iii) d) 3)(Sheath- Elongation (After ageing))	-	1000	-
Table 1 iii) d) 3)(Sheath- Tensile strength (After ageing))	-	1000	-
Table 1 iii) d) 1)(Sheath- Elongation (Without ageing))	-	250	-
Table 1 iii) d) 1)(Sheath -Tensile strength (Without ageing))	-	250	-
Table 1 iii) c) 3)(Elongation variation)	-	1000	-
Table 1 iii) c) 3)(TS variation)	-	1000	-
Table 1 iii) c) 3)(Elongation (After ageing))	-	1000	-
Table 1 iii) c) 3)(Tensile strength (After ageing))	-	1000	-
Table 1 iii) c) 1)(Elongation (Without ageing))	-	250	-
Table 1 iii) c) 1)(Tensile strength (Without ageing))	-	250	-
(Cl. 18.1.4) (Cl. 19.1.5) (Cl. 20.1.4) (Cl. 22.1.4)(Colour of Sheath)	-	50	-
8.3(Thickness of Sheath)	-	300	-
5.2(Application )	-	50	-
5.3(Thickness of Insulation)	-	300	-
9(Overall dimensions)	-	300	-
10.11(Per sulphate test (for tinned Cu cable only))	-	500	-
4.2(Conductor resistance test)	-	500	-
4.1(Wrapping test (for Al))	-	200	-
4.1(Tensile test (for Al)- After Stranding)	-	300	-
4.1(Tensile test (for Al)-Before Stranding)	-	300	-
(Cl.6.1.3 of IS 8130:2013)(Flexible Conductors (Classes 5))	-	50	-
(Cl.6.1.3 of IS 8130:2013)( Flexible Conductors (Classes 5))	-	50	-
(Cl.6.1.3 of IS 8130:2013)(Stranded circular non compacted conductors(Class-2))	-	50	-
(Cl.6.1.3 of IS 8130:2013)(Stranded compacted circular conductors and shaped conductors (Class 2))	-	50	-
(Cl.6.1.3 of IS 8130:2013)(Stranded circular non compacted conductors (Class-2))	-	50	-
(Cl.6.1.3 of IS 8130:2013)(Solid Conductor (Class 1))	-	50	-
(Cl.6.1 of IS 8130:2013)(Solid Conductor (Class 1))	-	50	-
(Cl.6.1 of IS 8130:2013)(Solid Conductor (Class 1))	-	50	-
(Cl.16.1) (Cl.19.1)(Conductor- Diameter )	-	50	-
(Cl.16.1) (Cl.19.1)(Conductor)	-	50	-
(Cl.16.1) (Cl.19.1)(Conductor)	-	50	-
(Cl.16.1) (Cl.19.1)(Conductor)	-	50	-
(Cl. 18.1.3) (Cl. 19.1.4) (Cl. 20.1.3) (Cl. 21.1.3) (Cl. 22.1.3)(Assembly of cores )	-	50	-
12(CONSTRUCTION Core Identification)	-	50	-
8.1(Sheath Material )	-	50	-
7(Binder Tape)	-	50	-
6.2(Filler)	-	50	-
6.1(Filler)	-	50	-
5.1(Insulation)	-	50	-
4.4(Joints in Conductor)	-	50	-
4.4(Joints in Conductor)	-	50	-
4.1(Conductor - Material)	-	50	-
4.1(Conductor - Material)	-	50	-
table 1 e) 3) (IR constant- max. Temp)	-	500	-
table 1 e) 3) (Volume Resistivity - Maximum temp)	-	500	-
Table 1 iii) c) 9)(Cold impact for insulation)	-	500	-
Table 1 iii) c) 8)(Cold bend for insulation)	-	500	-

31 Dec, 2029

-
Included w.e.f. 10.05.2019

103

IS 5484 (2023)

EC GRADE ALUMINIUM ROD PRODUCED BY CONTINUOUS CASTING AND ROLLING - SPECIFICATION

13500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5(Manufacture)	-	500	-
Cl-6.1(Grades and chemical composition of EC grade aluminium rod produced)	-	2000	-
Cl-6.2(Chemical analysis of the material)	-	2000	-
Cl-7.1(General condition for delivery and inspection relating)	-	500	-
Cl-9(Ultimate tensile strength and elongation)	-	2000	-
Cl-10.1(Resistivity)	-	1500	-
Cl-10.1(electrical conductivity)	-	500	-
Cl-10.1.1(Resistivity and Conductivity Limit)	-	1000	-
Cl-11(Dimensions)	-	1500	-
Cl-13(Finish and freedom from defects)	-	1000	-
Cl-14(Rejection and retest)	-	500	-
Cl-16(Marking)	-	500	-
Cl-5(Manufacture)	-	500	-
Cl-6.1(Grades and chemical composition of EC grade aluminium rod produced)	-	2000	-
Cl-6.2(Chemical analysis of the material)	-	2000	-
Cl-7.1(General condition for delivery and inspection relating)	-	500	-
Cl-9(Ultimate tensile strength and elongation)	-	2000	-
Cl-10.1(Resistivity)	-	1500	-
Cl-10.1(electrical conductivity)	-	500	-
Cl-10.1.1(Resistivity and Conductivity Limit)	-	1000	-
Cl-11(Dimensions)	-	1500	-
Cl-13(Finish and freedom from defects)	-	1000	-
Cl-14(Rejection and retest)	-	500	-
Cl-16(Marking)	-	500	-
Cl-5(Manufacture)	-	500	-
Cl-6.1(Grades and chemical composition of EC grade aluminium rod produced)	-	2000	-
Cl-6.2(Chemical analysis of the material)	-	2000	-
Cl-7.1(General condition for delivery and inspection relating)	-	500	-
Cl-9(Ultimate tensile strength and elongation)	-	2000	-
Cl-10.1(Resistivity)	-	1500	-
Cl-10.1(electrical conductivity)	-	500	-
Cl-10.1.1(Resistivity and Conductivity Limit)	-	1000	-
Cl-11(Dimensions)	-	1500	-
Cl-13(Finish and freedom from defects)	-	1000	-
Cl-14(Rejection and retest)	-	500	-
Cl-16(Marking)	-	500	-
Cl-5(Manufacture)	-	500	-
Cl-6.1(Grades and chemical composition of EC grade aluminium rod produced)	-	2000	-
Cl-6.2(Chemical analysis of the material)	-	2000	-
Cl-7.1(General condition for delivery and inspection relating)	-	500	-
Cl-9(Ultimate tensile strength and elongation)	-	2000	-
Cl-10.1(Resistivity)	-	1500	-
Cl-10.1(electrical conductivity)	-	500	-
Cl-10.1.1(Resistivity and Conductivity Limit)	-	1000	-
Cl-11(Dimensions)	-	1500	-
Cl-13(Finish and freedom from defects)	-	1000	-
Cl-14(Rejection and retest)	-	500	-
Cl-16(Marking)	-	500	-
Cl-5(Manufacture)	-	500	-
Cl-6.1(Grades and chemical composition of EC grade aluminium rod produced)	-	2000	-
Cl-6.2(Chemical analysis of the material)	-	2000	-
Cl-7.1(General condition for delivery and inspection relating)	-	500	-
Cl-9(Ultimate tensile strength and elongation)	-	2000	-
Cl-10.1(Resistivity)	-	1500	-
Cl-10.1(electrical conductivity)	-	500	-
Cl-10.1.1(Resistivity and Conductivity Limit)	-	1000	-
Cl-11(Dimensions)	-	1500	-
Cl-13(Finish and freedom from defects)	-	1000	-
Cl-14(Rejection and retest)	-	500	-
Cl-16(Marking)	-	500	-
Cl-5(Manufacture)	-	-	-
Cl-6.1(Grades and chemical composition of EC grade aluminium rod produced)	-	-	-
Cl-6.2(Chemical analysis of the material)	-	-	-
Cl-7.1(General condition for delivery and inspection relating)	-	-	-
Cl-9(Ultimate tensile strength and elongation)	-	-	-
Cl-10.1(Resistivity)	-	-	-
Cl-10.1(electrical conductivity)	-	-	-
Cl-10.1.1(Resistivity and Conductivity Limit)	-	-	-
Cl-11(Dimensions)	-	-	-
Cl-13(Finish and freedom from defects)	-	-	-
Cl-14(Rejection and retest)	-	-	-
Cl-16(Marking)	-	-	-

31 Dec, 2029

-
Included w.e.f. 27.02.2024

104

IS 3854 (2023)

Switches for Domestic and Similar Purposes - Specification (Third Revision)

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4(General Requirements)	-	200	-
Cl-5(General notes on tests)	-	200	-
Cl-6(Rating)	-	300	-
Cl-7(Classification)	-	350	-
Cl-8(Marking)	-	350	-
Cl-9(Checking of dimensions)	-	500	-
Cl-10.1, 10.2(Prevention of Access to Live Parts)	-	700	-
Cl-10.3(Requirements for Accessible Metal Parts)	-	400	-
Cl-10.4(Requirements for Insulation of the Mechanism)	-	400	-
Cl. 10.5(Requirements for Insulation of the Mechanism with Respect to the Surrounding Environment)	-	400	-
Cl-10.6(Requirements for Switches Operated Indirectly)	-	400	-
Cl-10.7(Requirements for Switches with Replaceable Pull Cord)	-	300	-
Cl-11(Provision for earthing)	-	2000	-
Cl-12(Terminals)	-	500	-
Cl-13(Constructional requirements)	-	500	-
Cl-14(Mechanism)	-	400	-
Cl-15.1(Resistance to Ageing)	-	1500	-
Cl-15.2(Protection Provided by Enclosures of Switches)	-	500	-
Cl-15.3(Resistance to Humidity)	-	800	-
Cl-16.1(General)	-	400	-
Cl-16.2(Test for Measuring the Insulation Resistance)	-	1000	-
Cl-16.3(Electric Strength Test)	-	900	-
Cl-17(Temperature rise)	-	2000	-
Cl-18(Making and breaking capacity)	-	1800	-
Cl-19(Normal operation)	-	3500	-
Cl-20(Mechanical strength)	-	500	-
Cl-21(Resistance to heat)	-	1000	-
Cl-22(Screws, current carrying parts and connections)	-	500	-
Cl-23(Creepage distances, clearances and distance through sealing compound)	-	500	-
Cl-24.1(Resistance to abnormal heat and fire)	-	700	-
Cl-24.2(Resistance to tracking)	-	1000	-
Cl-25(Resistance to rusting)	-	500	-
Cl-4(General Requirements)	-	200	-
Cl-5(General notes on tests)	-	200	-
Cl-6(Rating)	-	300	-
Cl-7(Classification)	-	350	-
Cl-8(Marking)	-	350	-
Cl-9(Checking of dimensions)	-	500	-
Cl-10.1, 10.2(Prevention of Access to Live Parts)	-	700	-
Cl-10.3(Requirements for Accessible Metal Parts)	-	400	-
Cl-10.4(Requirements for Insulation of the Mechanism)	-	400	-
Cl. 10.5(Requirements for Insulation of the Mechanism with Respect to the Surrounding Environment)	-	400	-
Cl-10.6(Requirements for Switches Operated Indirectly)	-	400	-
Cl-10.7(Requirements for Switches with Replaceable Pull Cord)	-	300	-
Cl-11(Provision for earthing)	-	2000	-
Cl-12(Terminals)	-	500	-
Cl-13(Constructional requirements)	-	500	-
Cl-14(Mechanism)	-	400	-
Cl-15.1(Resistance to Ageing)	-	1500	-
Cl-15.2(Protection Provided by Enclosures of Switches)	-	500	-
Cl-15.3(Resistance to Humidity)	-	800	-
Cl-16.1(General)	-	400	-
Cl-16.2(Test for Measuring the Insulation Resistance)	-	1000	-
Cl-16.3(Electric Strength Test)	-	900	-
Cl-17(Temperature rise)	-	1000	-
Cl-18(Making and breaking capacity)	-	1000	-
Cl-19(Normal operation)	-	3000	-
Cl-20(Mechanical strength)	-	500	-
Cl-21(Resistance to heat)	-	1000	-
Cl-22(Screws, current carrying parts and connections)	-	500	-
Cl-23(Creepage distances, clearances and distance through sealing compound)	-	500	-
Cl-24.1(Resistance to abnormal heat and fire)	-	700	-
Cl-24.2(Resistance to tracking)	-	1000	-
Cl-25(Resistance to rusting)	-	500	-
19.1(Test for Switches Intended for Inductive Loads)	-	500	-
19.2(Test for Switches Intended for Externally Ballasted Lamp Loads)	-	500	-
19.3(Test for Switches Intended for Self-ballasted Lamp Loads)	-	500	-
13.5(Attachment of knobs)	-	200	-
12.3.11(Table 11)(Test Current for the Verification of Electrical and Thermal Stresses in Normal Use of Screwless Terminals)	-	300	-
12.3.12(Table 13)(Deflection Test Forces)	-	300	-

31 Dec, 2029

-
-

Bureau of Indian Standards

The National Standards Body of India

DELHI TEST HOUSE (A Unit of Delhii Test House Global LLP) (65) KUNDLI-2 SONIPAT

Plot 65, Phase IV, Sector-57, HSIIDC Industrial Area, Kundli, Sonipat-131028, Haryana., SONIPAT, Sonipat, Haryana, 131028

9810442016 rohit@delhitesthouse.com

Scope List